From fbbfd68bc00d7bf431042b2e92cc4e540b827f67 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 9 Sep 2013 17:55:32 +0900 Subject: spi: bfin5xx: convert from legacy pm ops to dev_pm_ops Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-bfin5xx.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 45bdf73d6868..1e2894315bb0 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -1410,10 +1410,10 @@ static int bfin_spi_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int bfin_spi_suspend(struct device *dev) { - struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev); int status = 0; status = bfin_spi_stop_queue(drv_data); @@ -1432,9 +1432,9 @@ static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int bfin_spi_resume(struct platform_device *pdev) +static int bfin_spi_resume(struct device *dev) { - struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev); int status = 0; bfin_write(&drv_data->regs->ctl, drv_data->ctrl_reg); @@ -1443,25 +1443,27 @@ static int bfin_spi_resume(struct platform_device *pdev) /* Start the queue running */ status = bfin_spi_start_queue(drv_data); if (status != 0) { - dev_err(&pdev->dev, "problem starting queue (%d)\n", status); + dev_err(dev, "problem starting queue (%d)\n", status); return status; } return 0; } + +static SIMPLE_DEV_PM_OPS(bfin_spi_pm_ops, bfin_spi_suspend, bfin_spi_resume); + +#define BFIN_SPI_PM_OPS (&bfin_spi_pm_ops) #else -#define bfin_spi_suspend NULL -#define bfin_spi_resume NULL -#endif /* CONFIG_PM */ +#define BFIN_SPI_PM_OPS NULL +#endif MODULE_ALIAS("platform:bfin-spi"); static struct platform_driver bfin_spi_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, + .pm = BFIN_SPI_PM_OPS, }, - .suspend = bfin_spi_suspend, - .resume = bfin_spi_resume, .remove = bfin_spi_remove, }; -- cgit v1.2.3 From 673d6e1767ee06496f0f94e5087c817003983ffd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 9 Sep 2013 17:56:17 +0900 Subject: spi: bfin-sport: convert from legacy pm ops to dev_pm_ops Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-bfin-sport.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index 91921b5f5817..6c81a5978eca 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -879,11 +879,10 @@ static int bfin_sport_spi_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int -bfin_sport_spi_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int bfin_sport_spi_suspend(struct device *dev) { - struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_sport_spi_master_data *drv_data = dev_get_drvdata(dev); int status; status = bfin_sport_spi_stop_queue(drv_data); @@ -896,10 +895,9 @@ bfin_sport_spi_suspend(struct platform_device *pdev, pm_message_t state) return status; } -static int -bfin_sport_spi_resume(struct platform_device *pdev) +static int bfin_sport_spi_resume(struct device *dev) { - struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + struct bfin_sport_spi_master_data *drv_data = dev_get_drvdata(dev); int status; /* Enable the SPI interface */ @@ -912,19 +910,22 @@ bfin_sport_spi_resume(struct platform_device *pdev) return status; } + +static SIMPLE_DEV_PM_OPS(bfin_sport_spi_pm_ops, bfin_sport_spi_suspend, + bfin_sport_spi_resume); + +#define BFIN_SPORT_SPI_PM_OPS (&bfin_sport_spi_pm_ops) #else -# define bfin_sport_spi_suspend NULL -# define bfin_sport_spi_resume NULL +#define BFIN_SPORT_SPI_PM_OPS NULL #endif static struct platform_driver bfin_sport_spi_driver = { .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = BFIN_SPORT_SPI_PM_OPS, }, .probe = bfin_sport_spi_probe, .remove = bfin_sport_spi_remove, - .suspend = bfin_sport_spi_suspend, - .resume = bfin_sport_spi_resume, }; module_platform_driver(bfin_sport_spi_driver); -- cgit v1.2.3 From 6e99897ba0cdeb83e91738683000aeed6a079cae Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 2 Sep 2013 11:56:21 +0530 Subject: spi: pl022: Remove redundant break 'break' immediately after return has no effect. Signed-off-by: Sachin Kamat Acked-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 9c511a954d21..1ff2d8e78f51 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1619,7 +1619,6 @@ static int verify_controller_parameters(struct pl022 *pl022, dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; - break; } switch (chip_info->tx_lev_trig) { case SSP_TX_1_OR_MORE_EMPTY_LOC: @@ -1645,7 +1644,6 @@ static int verify_controller_parameters(struct pl022 *pl022, dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; - break; } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) -- cgit v1.2.3 From 4ebfee9118599dece86429270be1bcbb3099f237 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 18:53:36 +0900 Subject: spi: pl022: remove unnecessary amba_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1ff2d8e78f51..c13d523f1f48 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2286,7 +2286,6 @@ pl022_remove(struct amba_device *adev) amba_release_regions(adev); tasklet_disable(&pl022->pump_transfers); spi_unregister_master(pl022->master); - amba_set_drvdata(adev, NULL); return 0; } -- cgit v1.2.3 From 666d5b4c742ba666eb68b467d777b7862f362ae5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 31 Aug 2013 18:50:52 +0100 Subject: spi: core: Add devm_spi_register_master() Help simplify the cleanup code for SPI master drivers by providing a managed master registration function, ensuring that the master is automatically unregistered whenever the device is unbound. Signed-off-by: Mark Brown --- Documentation/driver-model/devres.txt | 3 +++ drivers/spi/spi.c | 35 +++++++++++++++++++++++++++++++++++ include/linux/spi/spi.h | 2 ++ 3 files changed, 40 insertions(+) diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index fcb34a5697ea..84ea8216cc7d 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -302,3 +302,6 @@ PHY SLAVE DMA ENGINE devm_acpi_dma_controller_register() + +SPI + devm_spi_register_master() diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 9e039c60c068..a586ceb111fc 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1245,6 +1245,41 @@ done: } EXPORT_SYMBOL_GPL(spi_register_master); +static void devm_spi_unregister(struct device *dev, void *res) +{ + spi_unregister_master(*(struct spi_master **)res); +} + +/** + * dev_spi_register_master - register managed SPI master controller + * @dev: device managing SPI master + * @master: initialized master, originally from spi_alloc_master() + * Context: can sleep + * + * Register a SPI device as with spi_register_master() which will + * automatically be unregister + */ +int devm_spi_register_master(struct device *dev, struct spi_master *master) +{ + struct spi_master **ptr; + int ret; + + ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = spi_register_master(master); + if (ret != 0) { + *ptr = master; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return ret; +} +EXPORT_SYMBOL_GPL(devm_spi_register_master); + static int __unregister(struct device *dev, void *null) { spi_unregister_device(to_spi_device(dev)); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 887116dbce2c..4d634d66ba0b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -434,6 +434,8 @@ extern struct spi_master * spi_alloc_master(struct device *host, unsigned size); extern int spi_register_master(struct spi_master *master); +extern int devm_spi_register_master(struct device *dev, + struct spi_master *master); extern void spi_unregister_master(struct spi_master *master); extern struct spi_master *spi_busnum_to_master(u16 busnum); -- cgit v1.2.3 From 247263dba208fab08c7f49900a9c79adaae1176e Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:23:00 +0900 Subject: spi: bcm2835: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 52c81481c5c7..4c332143a310 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -358,7 +358,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) bcm2835_wr(bs, BCM2835_SPI_CS, BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); - err = spi_register_master(master); + err = devm_spi_register_master(&pdev->dev, master); if (err) { dev_err(&pdev->dev, "could not register SPI master: %d\n", err); goto out_free_irq; @@ -381,14 +381,12 @@ static int bcm2835_spi_remove(struct platform_device *pdev) struct bcm2835_spi *bs = spi_master_get_devdata(master); free_irq(bs->irq, master); - spi_unregister_master(master); /* Clear FIFOs, and disable the HW block */ bcm2835_wr(bs, BCM2835_SPI_CS, BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); clk_disable_unprepare(bs->clk); - spi_master_put(master); return 0; } -- cgit v1.2.3 From bca76931b934ad323c56d9aab7a74139306d18bf Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:24:57 +0900 Subject: spi: bcm63xx: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 536b0e363826..80d56b214eb5 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -412,7 +412,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); /* register and we are done */ - ret = spi_register_master(master); + ret = devm_spi_register_master(dev, master); if (ret) { dev_err(dev, "spi register failed\n"); goto out_clk_disable; @@ -438,8 +438,6 @@ static int bcm63xx_spi_remove(struct platform_device *pdev) struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct bcm63xx_spi *bs = spi_master_get_devdata(master); - spi_unregister_master(master); - /* reset spi block */ bcm_spi_writeb(bs, 0, SPI_INT_MASK); @@ -447,8 +445,6 @@ static int bcm63xx_spi_remove(struct platform_device *pdev) clk_disable_unprepare(bs->clk); clk_put(bs->clk); - spi_master_put(master); - return 0; } -- cgit v1.2.3 From 6221df6d88b847da0803b2ced7826f005e62c837 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:26:30 +0900 Subject: spi: bfin-v3: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Acked-by: Scott Jiang Signed-off-by: Mark Brown --- drivers/spi/spi-bfin-v3.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-bfin-v3.c b/drivers/spi/spi-bfin-v3.c index f4bf81347d68..8f8598834b30 100644 --- a/drivers/spi/spi-bfin-v3.c +++ b/drivers/spi/spi-bfin-v3.c @@ -867,7 +867,7 @@ static int bfin_spi_probe(struct platform_device *pdev) tasklet_init(&drv_data->pump_transfers, bfin_spi_pump_transfers, (unsigned long)drv_data); /* register with the SPI framework */ - ret = spi_register_master(master); + ret = devm_spi_register_master(dev, master); if (ret) { dev_err(dev, "can not register spi master\n"); goto err_free_peripheral; @@ -898,7 +898,6 @@ static int bfin_spi_remove(struct platform_device *pdev) free_dma(drv_data->rx_dma); free_dma(drv_data->tx_dma); - spi_unregister_master(drv_data->master); return 0; } -- cgit v1.2.3 From c493fc4bbd4f27b1a8a141648df866c386441b70 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:27:48 +0900 Subject: spi: clps711x: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index b597a92565dc..f2b1a1c33907 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -230,7 +230,7 @@ static int spi_clps711x_probe(struct platform_device *pdev) goto clk_out; } - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (!ret) { dev_info(&pdev->dev, "SPI bus driver initialized. Master clock %u Hz\n", @@ -261,8 +261,6 @@ static int spi_clps711x_remove(struct platform_device *pdev) if (gpio_is_valid(hw->chipselect[i])) gpio_free(hw->chipselect[i]); - spi_unregister_master(master); - return 0; } -- cgit v1.2.3 From 434eaf3b231125c73450bbc6ebe2396b9b63aa2f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:30:41 +0900 Subject: spi: ep93xx: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-ep93xx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index d22c00a227b6..486fb6deab05 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -942,7 +942,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev) /* make sure that the hardware is disabled */ ep93xx_spi_write_u8(espi, SSPCR1, 0); - error = spi_register_master(master); + error = devm_spi_register_master(&pdev->dev, master); if (error) { dev_err(&pdev->dev, "failed to register SPI master\n"); goto fail_free_dma; @@ -968,7 +968,6 @@ static int ep93xx_spi_remove(struct platform_device *pdev) ep93xx_spi_release_dma(espi); - spi_unregister_master(master); return 0; } -- cgit v1.2.3 From eaa24297846bcdd98cefd52937ed88046a121ebc Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:31:50 +0900 Subject: spi: mpc512x: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index dbc5e999a1f5..b4426dd8a0c3 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -534,7 +534,7 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, if (ret < 0) goto free_clock; - ret = spi_register_master(master); + ret = devm_spi_register_master(dev, master); if (ret < 0) goto free_clock; @@ -557,12 +557,10 @@ static int mpc512x_psc_spi_do_remove(struct device *dev) struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); - spi_unregister_master(master); clk_disable_unprepare(mps->clk_mclk); free_irq(mps->irq, mps); if (mps->psc) iounmap(mps->psc); - spi_master_put(master); return 0; } -- cgit v1.2.3 From 33e195acf2682627d9f4d9fb9c30a5dd5323bc5c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:32:56 +0900 Subject: spi: mxs: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index de7b1141b90f..312c7f99c4a7 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -571,7 +571,7 @@ static int mxs_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret) { dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret); goto out_disable_clk; @@ -598,10 +598,8 @@ static int mxs_spi_remove(struct platform_device *pdev) spi = spi_master_get_devdata(master); ssp = &spi->ssp; - spi_unregister_master(master); clk_disable_unprepare(ssp->clk); dma_release_channel(ssp->dmach); - spi_master_put(master); return 0; } -- cgit v1.2.3 From 22ad2d8df77d1e88996d0e8f1c04db65f235a778 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:34:24 +0900 Subject: spi: octeon: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-octeon.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-octeon.c b/drivers/spi/spi-octeon.c index 5f28ddbe4f7e..67249a48b391 100644 --- a/drivers/spi/spi-octeon.c +++ b/drivers/spi/spi-octeon.c @@ -272,7 +272,7 @@ static int octeon_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8); master->dev.of_node = pdev->dev.of_node; - err = spi_register_master(master); + err = devm_spi_register_master(&pdev->dev, master); if (err) { dev_err(&pdev->dev, "register master failed: %d\n", err); goto fail; @@ -292,8 +292,6 @@ static int octeon_spi_remove(struct platform_device *pdev) struct octeon_spi *p = spi_master_get_devdata(master); u64 register_base = p->register_base; - spi_unregister_master(master); - /* Clear the CSENA* and put everything in a known state. */ cvmx_write_csr(register_base + OCTEON_SPI_CFG, 0); -- cgit v1.2.3 From 5c4c5c7be116b0cce2e71173158060afac4144d0 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:37:23 +0900 Subject: spi: omap-100k: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-omap-100k.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 69ecf05757dd..b6ed82beb01d 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -457,7 +457,7 @@ static int omap1_spi100k_probe(struct platform_device *pdev) goto err; } - status = spi_register_master(master); + status = devm_spi_register_master(&pdev->dev, master); if (status < 0) goto err; @@ -485,8 +485,6 @@ static int omap1_spi100k_remove(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - spi_unregister_master(master); - return 0; } -- cgit v1.2.3 From b95e02b748ce3674a81d5796b5ee398cbccc92df Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:40:29 +0900 Subject: spi: omap2-mcspi: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index ed4af4708d9a..2f7fd35a9ac8 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1407,7 +1407,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev) if (status < 0) goto disable_pm; - status = spi_register_master(master); + status = devm_spi_register_master(&pdev->dev, master); if (status < 0) goto disable_pm; @@ -1435,7 +1435,6 @@ static int omap2_mcspi_remove(struct platform_device *pdev) pm_runtime_put_sync(mcspi->dev); pm_runtime_disable(&pdev->dev); - spi_unregister_master(master); kfree(dma_channels); return 0; -- cgit v1.2.3 From 4bd3d8e36b5571db8874ea95ba2b95de1192e387 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:43:09 +0900 Subject: spi: orion: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Acked-by: Jason Cooper Signed-off-by: Mark Brown --- drivers/spi/spi-orion.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 1d1d321d90c4..d96d67869d7b 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -457,7 +457,7 @@ static int orion_spi_probe(struct platform_device *pdev) goto out_rel_clk; master->dev.of_node = pdev->dev.of_node; - status = spi_register_master(master); + status = devm_spi_register_master(&pdev->dev, master); if (status < 0) goto out_rel_clk; @@ -483,8 +483,6 @@ static int orion_spi_remove(struct platform_device *pdev) clk_disable_unprepare(spi->clk); clk_put(spi->clk); - spi_unregister_master(master); - return 0; } -- cgit v1.2.3 From 35794a77168b739bbc758b6c5b11c78572188d77 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:44:59 +0900 Subject: spi: pl022: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Acked-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index c13d523f1f48..5e3011094eb6 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2225,7 +2225,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) /* Register with the SPI framework */ amba_set_drvdata(adev, pl022); - status = spi_register_master(master); + status = devm_spi_register_master(&adev->dev, master); if (status != 0) { dev_err(&adev->dev, "probe - problem registering spi master\n"); @@ -2285,7 +2285,6 @@ pl022_remove(struct amba_device *adev) clk_unprepare(pl022->clk); amba_release_regions(adev); tasklet_disable(&pl022->pump_transfers); - spi_unregister_master(pl022->master); return 0; } -- cgit v1.2.3 From a807fcd090d6e778717d0954fc6a58a72ee16ba0 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:46:55 +0900 Subject: spi: pxa2xx: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2eb06ee0b326..669306aa6c29 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1196,7 +1196,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); - status = spi_register_master(master); + status = devm_spi_register_master(&pdev->dev, master); if (status != 0) { dev_err(&pdev->dev, "problem registering spi master\n"); goto out_error_clock_enabled; @@ -1248,9 +1248,6 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) /* Release SSP */ pxa_ssp_free(ssp); - /* Disconnect from the SPI framework */ - spi_unregister_master(drv_data->master); - return 0; } -- cgit v1.2.3 From 1c43f2ae1ee3b04f7466e31a59b19b7fa5fe4fc2 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:47:59 +0900 Subject: spi: sh-hspi: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- drivers/spi/spi-sh-hspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 0b68cb592fa4..97e913d225f3 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -303,7 +303,7 @@ static int hspi_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA; master->auto_runtime_pm = true; master->transfer_one_message = hspi_transfer_one_message; - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { dev_err(&pdev->dev, "spi_register_master error.\n"); goto error1; @@ -328,7 +328,6 @@ static int hspi_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); clk_put(hspi->clk); - spi_unregister_master(hspi->master); return 0; } -- cgit v1.2.3 From 5c8096439600de88a7ceded70cc86b817d4a548e Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:49:24 +0900 Subject: spi: tegra114: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-tegra114.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 145dd435483b..bb3a19f2ed39 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -1115,7 +1115,7 @@ static int tegra_spi_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); master->dev.of_node = pdev->dev.of_node; - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { dev_err(&pdev->dev, "can not register to master err %d\n", ret); goto exit_pm_disable; @@ -1142,7 +1142,6 @@ static int tegra_spi_remove(struct platform_device *pdev) struct tegra_spi_data *tspi = spi_master_get_devdata(master); free_irq(tspi->irq, tspi); - spi_unregister_master(master); if (tspi->tx_dma_chan) tegra_spi_deinit_dma_param(tspi, false); -- cgit v1.2.3 From f12f7318c44aa5ea1672f9a356de02a8739b6892 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:50:25 +0900 Subject: spi: tegra20-sflash: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-tegra20-sflash.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index 1d814dc6e000..a68d7797a8ec 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -529,7 +529,7 @@ static int tegra_sflash_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); master->dev.of_node = pdev->dev.of_node; - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { dev_err(&pdev->dev, "can not register to master err %d\n", ret); goto exit_pm_disable; @@ -553,7 +553,6 @@ static int tegra_sflash_remove(struct platform_device *pdev) struct tegra_sflash_data *tsd = spi_master_get_devdata(master); free_irq(tsd->irq, tsd); - spi_unregister_master(master); pm_runtime_disable(&pdev->dev); if (!pm_runtime_status_suspended(&pdev->dev)) -- cgit v1.2.3 From 716db5d64f5f9bd6600cd4f85c2986d34cd7f60e Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:51:32 +0900 Subject: spi: tegra20-slink: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-tegra20-slink.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index c70353672a23..829283e785d9 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1164,7 +1164,7 @@ static int tegra_slink_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); master->dev.of_node = pdev->dev.of_node; - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { dev_err(&pdev->dev, "can not register to master err %d\n", ret); goto exit_pm_disable; @@ -1191,7 +1191,6 @@ static int tegra_slink_remove(struct platform_device *pdev) struct tegra_slink_data *tspi = spi_master_get_devdata(master); free_irq(tspi->irq, tspi); - spi_unregister_master(master); if (tspi->tx_dma_chan) tegra_slink_deinit_dma_param(tspi, false); -- cgit v1.2.3 From 7388c03bac1b4466864945233abf3ca8ba1cb061 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:52:37 +0900 Subject: spi: ti-qspi: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index e12d962a289f..4e2109d9853d 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -532,7 +532,7 @@ static int ti_qspi_probe(struct platform_device *pdev) if (!of_property_read_u32(np, "spi-max-frequency", &max_freq)) qspi->spi_max_frequency = max_freq; - ret = spi_register_master(master); + ret = devm_spi_register_master(&pdev->dev, master); if (ret) goto free_master; @@ -543,22 +543,12 @@ free_master: return ret; } -static int ti_qspi_remove(struct platform_device *pdev) -{ - struct ti_qspi *qspi = platform_get_drvdata(pdev); - - spi_unregister_master(qspi->master); - - return 0; -} - static const struct dev_pm_ops ti_qspi_pm_ops = { .runtime_resume = ti_qspi_runtime_resume, }; static struct platform_driver ti_qspi_driver = { .probe = ti_qspi_probe, - .remove = ti_qspi_remove, .driver = { .name = "ti,dra7xxx-qspi", .owner = THIS_MODULE, -- cgit v1.2.3 From 2fe7e4add3e53df7c1b97e32076f8390dd81c6b3 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 24 Sep 2013 13:53:37 +0900 Subject: spi: txx9: use devm_spi_register_master() Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han Signed-off-by: Mark Brown --- drivers/spi/spi-txx9.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 7c6d15766c72..69eb88627d40 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -406,7 +406,7 @@ static int txx9spi_probe(struct platform_device *dev) master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */ master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); - ret = spi_register_master(master); + ret = devm_spi_register_master(&dev->dev, master); if (ret) goto exit; return 0; @@ -428,11 +428,9 @@ static int txx9spi_remove(struct platform_device *dev) struct spi_master *master = spi_master_get(platform_get_drvdata(dev)); struct txx9spi *c = spi_master_get_devdata(master); - spi_unregister_master(master); destroy_workqueue(c->workqueue); clk_disable(c->clk); clk_put(c->clk); - spi_master_put(master); return 0; } -- cgit v1.2.3 From db9371b853e7cebce93f0775215ef297b8d0bf93 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:38 +0200 Subject: spi: spi-bfin5xx: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Signed-off-by: Wolfram Sang Signed-off-by: Mark Brown --- drivers/spi/spi-bfin5xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 1e2894315bb0..5284f158d4e6 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -1464,12 +1464,13 @@ static struct platform_driver bfin_spi_driver = { .owner = THIS_MODULE, .pm = BFIN_SPI_PM_OPS, }, + .probe = bfin_spi_probe, .remove = bfin_spi_remove, }; static int __init bfin_spi_init(void) { - return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); + return platform_driver_register(&bfin_spi_driver); } subsys_initcall(bfin_spi_init); -- cgit v1.2.3