From 302822996fd572676bb66a7c4351f6faa0e4ddfd Mon Sep 17 00:00:00 2001 From: Liu Chuansheng Date: Thu, 12 Sep 2013 01:42:57 +0800 Subject: ACPI / osl: implement acpi_os_sleep() with msleep() Currently, acpi_os_sleep() uses schedule_timeout_interruptible() which can be interrupted by a signal, and that causes the real sleep time to be shorter. According to the ACPI spec: The Sleep term is used to implement long-term timing requirements. Execution is delayed for at least the required number of milliseconds. The sleeping time should be at least the required number msecs, so use msleep() which guarantees that to implement it. Signed-off-by: Liu Chuansheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/osl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e5f416c7f66e..b1629b571cb2 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -820,7 +820,7 @@ acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler) void acpi_os_sleep(u64 ms) { - schedule_timeout_interruptible(msecs_to_jiffies(ms)); + msleep(ms); } void acpi_os_stall(u32 us) -- cgit v1.2.3 From 763f527b68c6b026439f0b12ebe232d96b5563df Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Thu, 12 Sep 2013 03:32:03 -0400 Subject: ACPI / button: Using input_set_capability() to mark device's event capability Input layer provides input_set_capability() to set input device's event related bits. This patch is to use it to replace origin code. Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/button.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index a55773801c5f..c971929d75c2 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -383,18 +383,15 @@ static int acpi_button_add(struct acpi_device *device) switch (button->type) { case ACPI_BUTTON_TYPE_POWER: - input->evbit[0] = BIT_MASK(EV_KEY); - set_bit(KEY_POWER, input->keybit); + input_set_capability(input, EV_KEY, KEY_POWER); break; case ACPI_BUTTON_TYPE_SLEEP: - input->evbit[0] = BIT_MASK(EV_KEY); - set_bit(KEY_SLEEP, input->keybit); + input_set_capability(input, EV_KEY, KEY_SLEEP); break; case ACPI_BUTTON_TYPE_LID: - input->evbit[0] = BIT_MASK(EV_SW); - set_bit(SW_LID, input->swbit); + input_set_capability(input, EV_SW, SW_LID); break; } -- cgit v1.2.3 From 16a26e85279fd672050ffc3637038366629e8653 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Thu, 12 Sep 2013 03:32:04 -0400 Subject: ACPI / EC: Convert all printk() calls to dynamic debug function This patch is to convert all printks in the ec driver to pr_debug/info/err and define pr_fmt macro to replace PREFIX. Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 49 ++++++++++++++++++++++++------------------------- 1 file changed, 24 insertions(+), 25 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a06d98374705..d5309fd49458 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -28,6 +28,7 @@ /* Uncomment next line to get verbose printout */ /* #define DEBUG */ +#define pr_fmt(fmt) "ACPI : EC: " fmt #include #include @@ -49,9 +50,6 @@ #define ACPI_EC_DEVICE_NAME "Embedded Controller" #define ACPI_EC_FILE_INFO "info" -#undef PREFIX -#define PREFIX "ACPI: EC: " - /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ @@ -131,26 +129,26 @@ static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */ static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { u8 x = inb(ec->command_addr); - pr_debug(PREFIX "---> status = 0x%2.2x\n", x); + pr_debug("---> status = 0x%2.2x\n", x); return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { u8 x = inb(ec->data_addr); - pr_debug(PREFIX "---> data = 0x%2.2x\n", x); + pr_debug("---> data = 0x%2.2x\n", x); return x; } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { - pr_debug(PREFIX "<--- command = 0x%2.2x\n", command); + pr_debug("<--- command = 0x%2.2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { - pr_debug(PREFIX "<--- data = 0x%2.2x\n", data); + pr_debug("<--- data = 0x%2.2x\n", data); outb(data, ec->data_addr); } @@ -241,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec) } advance_transaction(ec, acpi_ec_read_status(ec)); } while (time_before(jiffies, delay)); - pr_debug(PREFIX "controller reset, restart transaction\n"); + pr_debug("controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); start_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); @@ -309,12 +307,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) } } if (ec_wait_ibf0(ec)) { - pr_err(PREFIX "input buffer is not empty, " + pr_err("input buffer is not empty, " "aborting transaction\n"); status = -ETIME; goto end; } - pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n", + pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n", t->command, t->wdata ? t->wdata[0] : 0); /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { @@ -331,12 +329,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) /* It is safe to enable the GPE outside of the transaction. */ acpi_enable_gpe(NULL, ec->gpe); } else if (t->irq_count > ec_storm_threshold) { - pr_info(PREFIX "GPE storm detected(%d GPEs), " + pr_info("GPE storm detected(%d GPEs), " "transactions will use polling mode\n", t->irq_count); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } - pr_debug(PREFIX "transaction end\n"); + pr_debug("transaction end\n"); end: if (ec->global_lock) acpi_release_global_lock(glk); @@ -570,12 +568,12 @@ static void acpi_ec_run(void *cxt) struct acpi_ec_query_handler *handler = cxt; if (!handler) return; - pr_debug(PREFIX "start query execution\n"); + pr_debug("start query execution\n"); if (handler->func) handler->func(handler->data); else if (handler->handle) acpi_evaluate_object(handler->handle, NULL, NULL, NULL); - pr_debug(PREFIX "stop query execution\n"); + pr_debug("stop query execution\n"); kfree(handler); } @@ -593,7 +591,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec) if (!copy) return -ENOMEM; memcpy(copy, handler, sizeof(*copy)); - pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); + pr_debug("push query execution (0x%2x) on queue\n", + value); return acpi_os_execute((copy->func) ? OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER, acpi_ec_run, copy); @@ -616,7 +615,7 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { - pr_debug(PREFIX "push gpe query to the queue\n"); + pr_debug("push gpe query to the queue\n"); return acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ec_gpe_query, ec); } @@ -630,7 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, struct acpi_ec *ec = data; u8 status = acpi_ec_read_status(ec); - pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status); + pr_debug("~~~> interrupt, status:0x%02x\n", status); advance_transaction(ec, status); if (ec_transaction_done(ec) && @@ -776,7 +775,7 @@ static int ec_install_handlers(struct acpi_ec *ec) * The AE_NOT_FOUND error will be ignored and OS * continue to initialize EC. */ - printk(KERN_ERR "Fail in evaluating the _REG object" + pr_err("Fail in evaluating the _REG object" " of EC device. Broken bios is suspected.\n"); } else { acpi_remove_gpe_handler(NULL, ec->gpe, @@ -795,10 +794,10 @@ static void ec_remove_handlers(struct acpi_ec *ec) acpi_disable_gpe(NULL, ec->gpe); if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) - pr_err(PREFIX "failed to remove space handler\n"); + pr_err("failed to remove space handler\n"); if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler))) - pr_err(PREFIX "failed to remove gpe handler\n"); + pr_err("failed to remove gpe handler\n"); clear_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags); } @@ -840,7 +839,7 @@ static int acpi_ec_add(struct acpi_device *device) ret = !!request_region(ec->command_addr, 1, "EC cmd"); WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr); - pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", + pr_info("GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); ret = ec_install_handlers(ec); @@ -931,7 +930,7 @@ static int ec_validate_ecdt(const struct dmi_system_id *id) /* MSI EC needs special treatment, enable it */ static int ec_flag_msi(const struct dmi_system_id *id) { - printk(KERN_DEBUG PREFIX "Detected MSI hardware, enabling workarounds.\n"); + pr_debug("Detected MSI hardware, enabling workarounds.\n"); EC_FLAGS_MSI = 1; EC_FLAGS_VALIDATE_ECDT = 1; return 0; @@ -1010,7 +1009,7 @@ int __init acpi_ec_ecdt_probe(void) status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { - pr_info(PREFIX "EC description table is found, configuring boot EC\n"); + pr_info("EC description table is found, configuring boot EC\n"); boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; @@ -1030,7 +1029,7 @@ int __init acpi_ec_ecdt_probe(void) /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ - printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n"); + pr_debug("Look up EC in DSDT\n"); status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device, boot_ec, NULL); /* Check that acpi_get_devices actually find something */ @@ -1042,7 +1041,7 @@ int __init acpi_ec_ecdt_probe(void) saved_ec->data_addr != boot_ec->data_addr || saved_ec->gpe != boot_ec->gpe || saved_ec->handle != boot_ec->handle) - pr_info(PREFIX "ASUSTek keeps feeding us with broken " + pr_info("ASUSTek keeps feeding us with broken " "ECDT tables, which are very hard to workaround. " "Trying to use DSDT EC info instead. Please send " "output of acpidump to linux-acpi@vger.kernel.org\n"); -- cgit v1.2.3 From c48b156517348a0130e9e6edbeba95f9b4e50d65 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Thu, 12 Sep 2013 03:32:05 -0400 Subject: ACPI / sysfs: make GPE sysfs attributes only accept correct values According to the design, GPE sysfs attributes should accept "disable", "enable", "clear" and integer numbers as params. Current code checks "disable", "enable" and "clear" first. If the param doesn't match, pass it to strtoul() as a string representing an integer number and assign the return value to the given GPE count. It is missing the check of whether or not the param really represents an integer number and strtoul() will return 0 if the string is not a number. This causes any params except for "enable", "disable", "clear" and a number to make the GPE count become 0. This patch is to use kstrtoul() to replace strtoul() and check the return value. If the convertion is successful, use as the new GPE count. If not, return an error. Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sysfs.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 05306a59aedc..b55778704444 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -564,6 +564,7 @@ static ssize_t counter_set(struct kobject *kobj, acpi_event_status status; acpi_handle handle; int result = 0; + unsigned long tmp; if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) { int i; @@ -596,8 +597,10 @@ static ssize_t counter_set(struct kobject *kobj, else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index); + else if (!kstrtoul(buf, 0, &tmp)) + all_counters[index].count = tmp; else - all_counters[index].count = strtoul(buf, NULL, 0); + result = -EINVAL; } else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) { int event = index - num_gpes; if (!strcmp(buf, "disable\n") && @@ -609,8 +612,10 @@ static ssize_t counter_set(struct kobject *kobj, else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_event(event); + else if (!kstrtoul(buf, 0, &tmp)) + all_counters[index].count = tmp; else - all_counters[index].count = strtoul(buf, NULL, 0); + result = -EINVAL; } else all_counters[index].count = strtoul(buf, NULL, 0); -- cgit v1.2.3 From 766a8a6dd89268107df1f6783f6a6338efcbf07e Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 13 Sep 2013 18:15:46 +0300 Subject: ACPI / thermal: convert printk(LEVEL...) to pr_ Convert printks to pr_* format. Additionally re-use PREFIX constant instead of hardcoded strings. Signed-off-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/thermal.c | 43 ++++++++++++++++++++----------------------- 1 file changed, 20 insertions(+), 23 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 6a0329340b42..e600b5dbfcb6 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -299,8 +299,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No critical threshold\n")); } else if (tmp <= 2732) { - printk(KERN_WARNING FW_BUG "Invalid critical threshold " - "(%llu)\n", tmp); + pr_warn(FW_BUG "Invalid critical threshold (%llu)\n", + tmp); tz->trips.critical.flags.valid = 0; } else { tz->trips.critical.flags.valid = 1; @@ -317,8 +317,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) * Allow override critical threshold */ if (crt_k > tz->trips.critical.temperature) - printk(KERN_WARNING PREFIX - "Critical threshold %d C\n", crt); + pr_warn(PREFIX "Critical threshold %d C\n", + crt); tz->trips.critical.temperature = crt_k; } } @@ -390,8 +390,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices); if (ACPI_FAILURE(status)) { - printk(KERN_WARNING PREFIX - "Invalid passive threshold\n"); + pr_warn(PREFIX "Invalid passive threshold\n"); tz->trips.passive.flags.valid = 0; } else @@ -453,8 +452,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices); if (ACPI_FAILURE(status)) { - printk(KERN_WARNING PREFIX - "Invalid active%d threshold\n", i); + pr_warn(PREFIX "Invalid active%d threshold\n", + i); tz->trips.active[i].flags.valid = 0; } else @@ -505,7 +504,7 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) valid |= tz->trips.active[i].flags.valid; if (!valid) { - printk(KERN_WARNING FW_BUG "No valid trip found\n"); + pr_warn(FW_BUG "No valid trip found\n"); return -ENODEV; } return 0; @@ -923,8 +922,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) acpi_bus_private_data_handler, tz->thermal_zone); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX - "Error attaching device data\n"); + pr_err(PREFIX "Error attaching device data\n"); return -ENODEV; } @@ -1094,9 +1092,8 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto free_memory; - printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", - acpi_device_name(device), acpi_device_bid(device), - KELVIN_TO_CELSIUS(tz->temperature)); + pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), + acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); goto end; free_memory: @@ -1159,24 +1156,24 @@ static int acpi_thermal_resume(struct device *dev) static int thermal_act(const struct dmi_system_id *d) { if (act == 0) { - printk(KERN_NOTICE "ACPI: %s detected: " - "disabling all active thermal trip points\n", d->ident); + pr_notice(PREFIX "%s detected: " + "disabling all active thermal trip points\n", d->ident); act = -1; } return 0; } static int thermal_nocrt(const struct dmi_system_id *d) { - printk(KERN_NOTICE "ACPI: %s detected: " - "disabling all critical thermal trip point actions.\n", d->ident); + pr_notice(PREFIX "%s detected: " + "disabling all critical thermal trip point actions.\n", d->ident); nocrt = 1; return 0; } static int thermal_tzp(const struct dmi_system_id *d) { if (tzp == 0) { - printk(KERN_NOTICE "ACPI: %s detected: " - "enabling thermal zone polling\n", d->ident); + pr_notice(PREFIX "%s detected: " + "enabling thermal zone polling\n", d->ident); tzp = 300; /* 300 dS = 30 Seconds */ } return 0; @@ -1184,8 +1181,8 @@ static int thermal_tzp(const struct dmi_system_id *d) { static int thermal_psv(const struct dmi_system_id *d) { if (psv == 0) { - printk(KERN_NOTICE "ACPI: %s detected: " - "disabling all passive thermal trip points\n", d->ident); + pr_notice(PREFIX "%s detected: " + "disabling all passive thermal trip points\n", d->ident); psv = -1; } return 0; @@ -1238,7 +1235,7 @@ static int __init acpi_thermal_init(void) dmi_check_system(thermal_dmi_table); if (off) { - printk(KERN_NOTICE "ACPI: thermal control disabled\n"); + pr_notice(PREFIX "thermal control disabled\n"); return -ENODEV; } -- cgit v1.2.3 From dd96dc32d59bdf620670a4a527ed9916796f654e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Sep 2013 17:29:43 +0200 Subject: x86 / ACPI: fix incorrect placement of __initdata tag __initdata tag should not be placed between "struct" and "resource" because it prevents the variable from being placed in the intended .init.data section. Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Signed-off-by: Rafael J. Wysocki --- arch/x86/kernel/acpi/boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 40c76604199f..d00db60a5e04 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -745,7 +745,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) #ifdef CONFIG_HPET_TIMER #include -static struct __initdata resource *hpet_res; +static struct resource *hpet_res __initdata; static int __init acpi_parse_hpet(struct acpi_table_header *table) { -- cgit v1.2.3 From e54968ca1eaa78749d7a7fc20227639a31dff629 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 7 Oct 2013 17:12:21 +0300 Subject: ACPI / platform: Add ACPI IDs for Intel SST audio device This adds ACPI IDs for Intel Smart Sound Technology (SST) device found in Intel Haswell and BayTrail platforms. Signed-off-by: Jarkko Nikula Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_platform.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index 1bde12708f9e..ed0f06390245 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -30,6 +30,9 @@ static const struct acpi_device_id acpi_platform_device_ids[] = { { "PNP0D40" }, + /* Intel Smart Sound Technology */ + { "INT33C8" }, + { "80860F28" }, { } }; -- cgit v1.2.3 From 088f1fd267c7f43b5d87850a0fa0c7e851ecae97 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 9 Oct 2013 09:49:20 +0300 Subject: ACPI / LPSS: fix UART Auto Flow Control There is an additional bit in the GENERAL register on newer silicon that needs to be set or UART's RTS pin fails to reflect the flow control settings in the Modem Control Register. This will fix an issue where the RTS pin of the UART stays always at 1.8V, regardless of the register settings. Signed-off-by: Heikki Krogerus Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_lpss.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index fb78bb9ad8f6..d3961014aad7 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -30,6 +30,7 @@ ACPI_MODULE_NAME("acpi_lpss"); /* Offsets relative to LPSS_PRIVATE_OFFSET */ #define LPSS_GENERAL 0x08 #define LPSS_GENERAL_LTR_MODE_SW BIT(2) +#define LPSS_GENERAL_UART_RTS_OVRD BIT(3) #define LPSS_SW_LTR 0x10 #define LPSS_AUTO_LTR 0x14 #define LPSS_TX_INT 0x20 @@ -68,11 +69,16 @@ struct lpss_private_data { static void lpss_uart_setup(struct lpss_private_data *pdata) { - unsigned int tx_int_offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; + unsigned int offset; u32 reg; - reg = readl(pdata->mmio_base + tx_int_offset); - writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + tx_int_offset); + offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; + reg = readl(pdata->mmio_base + offset); + writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + offset); + + offset = pdata->dev_desc->prv_offset + LPSS_GENERAL; + reg = readl(pdata->mmio_base + offset); + writel(reg | LPSS_GENERAL_UART_RTS_OVRD, pdata->mmio_base + offset); } static struct lpss_device_desc lpt_dev_desc = { -- cgit v1.2.3 From e83dda06242073b1c7f9a88f1001e32a4b9fcd1d Mon Sep 17 00:00:00 2001 From: Al Stone Date: Wed, 9 Oct 2013 14:21:10 -0600 Subject: ACPI: improve acpi_extract_package() utility The current version requires one to know the size of the package a priori; this is almost impossible if the package is composed of strings of variable length. This change allows the utility to allocate a buffer of the proper size if asked. Signed-off-by: Al Stone Signed-off-by: Rafael J. Wysocki --- drivers/acpi/utils.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 552248b0005b..fc2cd3284080 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -169,11 +169,20 @@ acpi_extract_package(union acpi_object *package, /* * Validate output buffer. */ - if (buffer->length < size_required) { + if (buffer->length == ACPI_ALLOCATE_BUFFER) { + buffer->pointer = ACPI_ALLOCATE(size_required); + if (!buffer->pointer) + return AE_NO_MEMORY; buffer->length = size_required; - return AE_BUFFER_OVERFLOW; - } else if (buffer->length != size_required || !buffer->pointer) { - return AE_BAD_PARAMETER; + memset(buffer->pointer, 0, size_required); + } else { + if (buffer->length < size_required) { + buffer->length = size_required; + return AE_BUFFER_OVERFLOW; + } else if (buffer->length != size_required || + !buffer->pointer) { + return AE_BAD_PARAMETER; + } } head = buffer->pointer; -- cgit v1.2.3 From 9208e3110bf0a6ba4ded56e374857d4b6609c911 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 16 Oct 2013 13:15:14 +0300 Subject: ACPI / platform: add ACPI ID for a Broadcom GPS chip This adds ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index aef79db906fe..8a4cfc7e71f0 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -31,6 +31,7 @@ static const struct acpi_device_id acpi_platform_device_ids[] = { { "PNP0D40" }, { "ACPI0003" }, { "VPC2004" }, + { "BCM4752" }, /* Intel Smart Sound Technology */ { "INT33C8" }, -- cgit v1.2.3 From 5e2be4e0edff4a1021b6743ca6859129cd8e7067 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 18 Oct 2013 12:01:43 +0300 Subject: ACPI / osl: remove an unneeded NULL check "str" is never NULL here so I have removed the check. There are static checkers which complain about superfluous NULL checks because it may indicate confusion or a bug. Signed-off-by: Dan Carpenter Signed-off-by: Rafael J. Wysocki --- drivers/acpi/osl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index b1629b571cb2..4923dd4232b3 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1335,7 +1335,7 @@ static int __init acpi_os_name_setup(char *str) if (!str || !*str) return 0; - for (; count-- && str && *str; str++) { + for (; count-- && *str; str++) { if (isalnum(*str) || *str == ' ' || *str == ':') *p++ = *str; else if (*str == '\'' || *str == '"') -- cgit v1.2.3 From b042453f3892465e8372b95a0f42c0890df03445 Mon Sep 17 00:00:00 2001 From: Levente Kurusa Date: Tue, 22 Oct 2013 16:53:35 +0200 Subject: ACPI: Add Toshiba NB100 to Vista _OSI blacklist This patch adds Toshiba NB100 to the Vista _OSI blacklist. The _OSI(Windows 2006) method is bugged on the netbook resulting in messed up PCI IRQ Routing information. This was observed on a netbook whose SATA controller mode was set to Compatibility mode. The controller would then issue IRQs to IRQ#16 instead of IRQ#20, where it should have been. No side-effects were found during testing, everything is working as it did before. References: http://marc.info/?t=137862230200001&r=1&w=2 References: http://www.spinics.net/lists/linux-ide/msg46173.html Signed-off-by: Levente Kurusa Reviewed-by: Robert Hancock Signed-off-by: Rafael J. Wysocki --- drivers/acpi/blacklist.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index aa4d874a96fd..b7fd1aeb6c42 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -273,6 +273,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"), }, }, + { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba NB100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "NB100"), + }, + }, /* * The following machines have broken backlight support when reporting -- cgit v1.2.3