From 50075892ba30c4c19c41235b5308ee5a1e2125d7 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 7 Jan 2015 16:45:07 +0200 Subject: mac80211: add TDLS supported channels correctly The function adding the supported channels IE during a TDLS connection had several issues: 1. If the entire subband is usable, the function exitted the loop without adding it 2. The function only checked chandef_usable, ignoring flags like RADAR which would prevent TDLS off-channel communcation. 3. HT20 was explicitly required in the chandef, while not a requirement for TDLS off-channel. Signed-off-by: Arik Nemtsov Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/tdls.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c index 159ebf1304b2..917088dfd696 100644 --- a/net/mac80211/tdls.c +++ b/net/mac80211/tdls.c @@ -68,17 +68,24 @@ ieee80211_tdls_add_subband(struct ieee80211_sub_if_data *sdata, ch = ieee80211_get_channel(sdata->local->hw.wiphy, i); if (ch) { /* we will be active on the channel */ - u32 flags = IEEE80211_CHAN_DISABLED | - IEEE80211_CHAN_NO_IR; cfg80211_chandef_create(&chandef, ch, - NL80211_CHAN_HT20); - if (cfg80211_chandef_usable(sdata->local->hw.wiphy, - &chandef, flags)) { + NL80211_CHAN_NO_HT); + if (cfg80211_reg_can_beacon(sdata->local->hw.wiphy, + &chandef, + sdata->wdev.iftype)) { ch_cnt++; + /* + * check if the next channel is also part of + * this allowed range + */ continue; } } + /* + * we've reached the end of a range, with allowed channels + * found + */ if (ch_cnt) { u8 *pos = skb_put(skb, 2); *pos++ = ieee80211_frequency_to_channel(subband_start); @@ -89,6 +96,15 @@ ieee80211_tdls_add_subband(struct ieee80211_sub_if_data *sdata, } } + /* all channels in the requested range are allowed - add them here */ + if (ch_cnt) { + u8 *pos = skb_put(skb, 2); + *pos++ = ieee80211_frequency_to_channel(subband_start); + *pos++ = ch_cnt; + + subband_cnt++; + } + return subband_cnt; } -- cgit v1.2.3