From 4b151244ff2142713994f17367375c85dcbd25ad Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Fri, 11 Feb 2022 19:16:13 +0100 Subject: ARM: dts: sti: move usb picophy nodes out of soc in stih410.dtsi Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section. Since they are controlled via syscfg, there is no reg property needed, which is required when having the node within the soc section. Modification is done within stih410.dtsi and within related board dts files (stih410-b2120.dts, stih410-b2260.dts). Signed-off-by: Alain Volmat Reviewed-by: Patrice Chotard Signed-off-by: Patrice Chotard --- arch/arm/boot/dts/stih410-b2120.dts | 16 +++++++------- arch/arm/boot/dts/stih410-b2260.dts | 16 +++++++------- arch/arm/boot/dts/stih410.dtsi | 42 ++++++++++++++++++------------------- 3 files changed, 36 insertions(+), 38 deletions(-) diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 9d3b118f5f0f..538ff98ca1b1 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -24,6 +24,14 @@ ethernet0 = ðernet0; }; + usb2_picophy1: phy2 { + status = "okay"; + }; + + usb2_picophy2: phy3 { + status = "okay"; + }; + soc { mmc0: sdhci@9060000 { @@ -33,14 +41,6 @@ sd-uhs-ddr50; }; - usb2_picophy1: phy2@0 { - status = "okay"; - }; - - usb2_picophy2: phy3@0 { - status = "okay"; - }; - ohci0: usb@9a03c00 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index c2d3b6de55d0..26d93f26f6d0 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -82,6 +82,14 @@ }; }; + usb2_picophy1: phy2 { + status = "okay"; + }; + + usb2_picophy2: phy3 { + status = "okay"; + }; + soc { /* Low speed expansion connector */ uart0: serial@9830000 { @@ -152,14 +160,6 @@ status = "okay"; }; - usb2_picophy1: phy2@0 { - status = "okay"; - }; - - usb2_picophy2: phy3@0 { - status = "okay"; - }; - ohci0: usb@9a03c00 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index fe83d9a522bf..ce2f62cf129b 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -12,31 +12,29 @@ bdisp0 = &bdisp0; }; - soc { - usb2_picophy1: phy2@0 { - compatible = "st,stih407-usb2-phy"; - reg = <0 0>; - #phy-cells = <0>; - st,syscfg = <&syscfg_core 0xf8 0xf4>; - resets = <&softreset STIH407_PICOPHY_SOFTRESET>, - <&picophyreset STIH407_PICOPHY0_RESET>; - reset-names = "global", "port"; + usb2_picophy1: phy2 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xf8 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + + status = "disabled"; + }; - status = "disabled"; - }; + usb2_picophy2: phy3 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xfc 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY1_RESET>; + reset-names = "global", "port"; - usb2_picophy2: phy3@0 { - compatible = "st,stih407-usb2-phy"; - reg = <0 0>; - #phy-cells = <0>; - st,syscfg = <&syscfg_core 0xfc 0xf4>; - resets = <&softreset STIH407_PICOPHY_SOFTRESET>, - <&picophyreset STIH407_PICOPHY1_RESET>; - reset-names = "global", "port"; - - status = "disabled"; - }; + status = "disabled"; + }; + soc { ohci0: usb@9a03c00 { compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; -- cgit v1.2.3