From 464e906737d6eba2fe63e913e0df4306423b4f61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 21 Jan 2014 13:59:17 +0100 Subject: mtd: m25p80: Set rx_nbits for Quad SPI transfers When using the Quad Read opcode, SPI masters still use Single SPI transfers, as spi_transfer.rx_nbits defaults to SPI_NBITS_SINGLE. Use SPI_NBITS_QUAD to fix this. While an earlier version of commit 3487a63955c34ea508bcf4ca5131ddd953876e2d ("drivers: mtd: m25p80: add quad read support") did this correctly, it was forgotten in the version that got merged. Signed-off-by: Geert Uytterhoeven Acked-by: Marek Vasut Signed-off-by: Brian Norris --- drivers/mtd/devices/m25p80.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 320c6a308630..ad1913909702 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -489,6 +489,16 @@ static inline int m25p80_dummy_cycles_read(struct m25p *flash) } } +static inline unsigned int m25p80_rx_nbits(const struct m25p *flash) +{ + switch (flash->flash_read) { + case M25P80_QUAD: + return 4; + default: + return 0; + } +} + /* * Read an address range from the flash chip. The address range * may be any size provided it is within the physical boundaries. @@ -519,6 +529,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, spi_message_add_tail(&t[0], &m); t[1].rx_buf = buf; + t[1].rx_nbits = m25p80_rx_nbits(flash); t[1].len = len; spi_message_add_tail(&t[1], &m); -- cgit v1.2.3