From c948aca4f49d94b08c425f65acdaca1d679d6fa7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 8 Mar 2010 19:38:13 +0100 Subject: MIPS: Fix build breakage if CONFIG_DEBUG_FS is enabled. Caused by 38b7827fcdd660f591d645bd3ae6644456a4773c - no, cpu_local_* was not unused. Signed-off-by: Ralf Baechle Cc: Christoph Lameter Acked-by: David Daney --- arch/mips/include/asm/fpu_emulator.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index aecada6f6117..3b4092705567 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -41,7 +41,11 @@ struct mips_fpu_emulator_stats { DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); #define MIPS_FPU_EMU_INC_STATS(M) \ - cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M)) +do { \ + preempt_disable(); \ + __local_inc(&__get_cpu_var(fpuemustats).M); \ + preempt_enable(); \ +} while (0) #else #define MIPS_FPU_EMU_INC_STATS(M) do { } while (0) -- cgit v1.2.3 From 1874a0886076fbb26665f93a8999c05e389bae22 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 9 Mar 2010 20:16:15 +0100 Subject: MIPS: Cavium: Remove unused watchdog code. Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/smp.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 51e980290ce1..6d99b9d8887d 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -279,14 +279,6 @@ static void octeon_cpu_die(unsigned int cpu) uint32_t avail_coremask; struct cvmx_bootmem_named_block_desc *block_desc; -#ifdef CONFIG_CAVIUM_OCTEON_WATCHDOG - /* Disable the watchdog */ - cvmx_ciu_wdogx_t ciu_wdog; - ciu_wdog.u64 = cvmx_read_csr(CVMX_CIU_WDOGX(cpu)); - ciu_wdog.s.mode = 0; - cvmx_write_csr(CVMX_CIU_WDOGX(cpu), ciu_wdog.u64); -#endif - while (per_cpu(cpu_state, cpu) != CPU_DEAD) cpu_relax(); -- cgit v1.2.3 From 1ef2887030dbeb42282a99f8a8e3d7ad07ef70ee Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 3 Mar 2010 11:07:07 -0800 Subject: MIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB The config option CAVIUM_RESERVE32_USE_WIRED_TLB is not supported. Remove the dead code controlled by it. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1028/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 67 +---------------------------------------- 1 file changed, 1 insertion(+), 66 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index b321d3b16877..26a9699db426 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -186,54 +186,6 @@ void octeon_check_cpu_bist(void) write_octeon_c0_dcacheerr(0); } -#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB -/** - * Called on every core to setup the wired tlb entry needed - * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set. - * - */ -static void octeon_hal_setup_per_cpu_reserved32(void *unused) -{ - /* - * The config has selected to wire the reserve32 memory for all - * userspace applications. We need to put a wired TLB entry in for each - * 512MB of reserve32 memory. We only handle double 256MB pages here, - * so reserve32 must be multiple of 512MB. - */ - uint32_t size = CONFIG_CAVIUM_RESERVE32; - uint32_t entrylo0 = - 0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6); - uint32_t entrylo1 = entrylo0 + (256 << 14); - uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20)); - while (size >= 512) { -#if 0 - pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n", - smp_processor_id(), entryhi); -#endif - add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M); - entrylo0 += 512 << 14; - entrylo1 += 512 << 14; - entryhi += 512 << 20; - size -= 512; - } -} -#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */ - -/** - * Called to release the named block which was used to made sure - * that nobody used the memory for something else during - * init. Now we'll free it so userspace apps can use this - * memory region with bootmem_alloc. - * - * This function is called only once from prom_free_prom_memory(). - */ -void octeon_hal_setup_reserved32(void) -{ -#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB - on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1); -#endif -} - /** * Reboot Octeon * @@ -502,25 +454,13 @@ void __init prom_init(void) * memory when it is getting memory from the * bootloader. Later, after the memory allocations are * complete, the reserve32 will be freed. - */ -#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB - if (CONFIG_CAVIUM_RESERVE32 & 0x1ff) - pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. " - "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB " - "is set\n"); - else - addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, - 0, 0, 512 << 20, - "CAVIUM_RESERVE32", 0); -#else - /* + * * Allocate memory for RESERVED32 aligned on 2MB boundary. This * is in case we later use hugetlb entries with it. */ addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, 0, 0, 2 << 20, "CAVIUM_RESERVE32", 0); -#endif if (addr < 0) pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); else @@ -817,9 +757,4 @@ void prom_free_prom_memory(void) panic("Unable to request_irq(OCTEON_IRQ_RML)\n"); } #endif - - /* This call is here so that it is performed after any TLB - initializations. It needs to be after these in case the - CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */ - octeon_hal_setup_reserved32(); } -- cgit v1.2.3 From b1cea3bab575af386618baba0db3c5fae7ce521f Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 3 Mar 2010 11:07:43 -0800 Subject: MIPS: Octeon: Remove #if 0 code. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1029/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 26a9699db426..e07c54048f97 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -246,18 +246,6 @@ static void octeon_halt(void) octeon_kill_core(NULL); } -#if 0 -/** - * Platform time init specifics. - * Returns - */ -void __init plat_time_init(void) -{ - /* Nothing special here, but we are required to have one */ -} - -#endif - /** * Handle all the error condition interrupts that might occur. * -- cgit v1.2.3 From abe5b417fb4a52e9510fdb5a16e722e91bf89e92 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 10 Mar 2010 16:16:04 +0100 Subject: MIPS: delay: Fix use of current_cpu_data in preemptable code. This may lead to warnings like: BUG: using smp_processor_id() in preemptible [00000000] code: reboot/1989 caller is __udelay+0x14/0x70 Call Trace: [] dump_stack+0x8/0x34 [] debug_smp_processor_id+0xf4/0x110 [] __udelay+0x14/0x70 [] md_notify_reboot+0x12c/0x148 [] notifier_call_chain+0x64/0xc8 [] __blocking_notifier_call_chain+0x64/0xc0 [] kernel_restart_prepare+0x1c/0x38 [] kernel_restart+0x14/0x50 [] SyS_reboot+0x10c/0x1f0 [] handle_sysn32+0x44/0x84 Signed-off-by: Ralf Baechle --- arch/mips/lib/delay.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c index 6b3b1de9dcae..5995969e8c42 100644 --- a/arch/mips/lib/delay.c +++ b/arch/mips/lib/delay.c @@ -41,7 +41,7 @@ EXPORT_SYMBOL(__delay); void __udelay(unsigned long us) { - unsigned int lpj = current_cpu_data.udelay_val; + unsigned int lpj = raw_current_cpu_data.udelay_val; __delay((us * 0x000010c7ull * HZ * lpj) >> 32); } @@ -49,7 +49,7 @@ EXPORT_SYMBOL(__udelay); void __ndelay(unsigned long ns) { - unsigned int lpj = current_cpu_data.udelay_val; + unsigned int lpj = raw_current_cpu_data.udelay_val; __delay((ns * 0x00000005ull * HZ * lpj) >> 32); } -- cgit v1.2.3 From 7a7ac952d5217b2f568e5ef91ac39b572e166f24 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 10 Mar 2010 00:27:28 +0800 Subject: MIPS: Trace: Don't trace irqsoff for the idle process Like x86 did in arch/x86/kernel/{process_32.c,process_64.c}, also don't trace irqsoff for idle. If there's no useful work to be done, we don't care about the irqsoff duration. If we trace the idle process, the max duration of irqsoff will be the idle time and make the irqsoff tracer useless. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Ingo Molnar Patchwork: http://patchwork.linux-mips.org/patch/1044/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 463b71b90a00..99960940d4a4 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -63,8 +63,13 @@ void __noreturn cpu_idle(void) smtc_idle_loop_hook(); #endif - if (cpu_wait) + + if (cpu_wait) { + /* Don't trace irqs off for idle */ + stop_critical_timings(); (*cpu_wait)(); + start_critical_timings(); + } } #ifdef CONFIG_HOTPLUG_CPU if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) && -- cgit v1.2.3 From 7ea4a6891b68fe60bf4eee41a7ef38d524b0aebd Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Wed, 3 Mar 2010 16:43:20 +0800 Subject: MIPS: Octeon: Remove redundant declaration of octeon_reserve32_memory octeon_reserve32_memory is defined In Octeon's setup.c, so remove the redundant extern declaration of this variable. Signed-off-by: Yang Shi To: f.fainelli@gmail.com Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1022/ Acked-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index e07c54048f97..9a06fa9f9f0c 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -45,9 +45,6 @@ extern struct plat_smp_ops octeon_smp_ops; extern void pci_console_init(const char *arg); #endif -#ifdef CONFIG_CAVIUM_RESERVE32 -extern uint64_t octeon_reserve32_memory; -#endif static unsigned long long MAX_MEMORY = 512ull << 20; struct octeon_boot_descriptor *octeon_boot_desc_ptr; -- cgit v1.2.3 From d5d3102b9adec0a34eb5899324b62a4a3d34183e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 11 Mar 2010 08:48:14 +0100 Subject: MIPS: Fix elfcore.c build warning kernel/elfcore.c includes which includes the . In , struct pt_regs is declared inside the parameter list of the elf_dump_regs function which causes a kernel build warning. Fixed by adding a forward declaration of struct pt_regs. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/elf.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index e53d7bed5cda..1184f6eea98b 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -310,6 +310,7 @@ do { \ #endif /* CONFIG_64BIT */ +struct pt_regs; struct task_struct; extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); -- cgit v1.2.3 From 52553664033078102f5f430c861ccd0863b1b708 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 27 Feb 2010 12:02:51 -0500 Subject: MIPS: Initialize an atomic_t properly with ATOMIC_INIT(0). Signed-off-by: Robert P. J. Day To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1008/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 25e825aea327..a95dea5459c4 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -182,7 +182,7 @@ static int vpemask[2][8] = { {0, 0, 0, 0, 0, 0, 0, 1} }; int tcnoprog[NR_CPUS]; -static atomic_t idle_hook_initialized = {0}; +static atomic_t idle_hook_initialized = ATOMIC_INIT(0); static int clock_hang_reported[NR_CPUS]; #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ -- cgit v1.2.3 From b846c10da5d6a5c159ab4dea92c1080d5add9fb1 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 11 Mar 2010 11:30:50 +0800 Subject: MIPS: Lemote 2F: Ensure atomic execution of _rdmsr and _wrmsr On Lemote 2F CS5536 MSRs are accessed through a index / data register pair. The access sequence must be protected by a spinlock to be atomic. Without this rebooting in fs2f_reboot() may fail. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: David Daney Patchwork: http://patchwork.linux-mips.org/patch/1058/ Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-loongson2.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c index 2bb4057bf6c7..d657ee0bc131 100644 --- a/arch/mips/pci/ops-loongson2.c +++ b/arch/mips/pci/ops-loongson2.c @@ -180,15 +180,21 @@ struct pci_ops loongson_pci_ops = { }; #ifdef CONFIG_CS5536 +DEFINE_RAW_SPINLOCK(msr_lock); + void _rdmsr(u32 msr, u32 *hi, u32 *lo) { struct pci_bus bus = { .number = PCI_BUS_CS5536 }; u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + unsigned long flags; + + raw_spin_lock_irqsave(&msr_lock, flags); loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); + raw_spin_unlock_irqrestore(&msr_lock, flags); } EXPORT_SYMBOL(_rdmsr); @@ -198,9 +204,13 @@ void _wrmsr(u32 msr, u32 hi, u32 lo) .number = PCI_BUS_CS5536 }; u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + unsigned long flags; + + raw_spin_lock_irqsave(&msr_lock, flags); loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); + raw_spin_unlock_irqrestore(&msr_lock, flags); } EXPORT_SYMBOL(_wrmsr); #endif -- cgit v1.2.3 From 582b65e4d3f9664f87661359af99def304bc68bb Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 10 Mar 2010 00:53:21 +0800 Subject: MIPS: Loongson: Add module info to the loongson2_clock driver This patch fixes a kernel warning when loading the the loongson2_clock driver: "Feb 25 23:42:27 localhost kernel: [ 4.965000] loongson2_clock: module license 'unspecified' taints kernel." Signed-off-by: Wu Zhangjin Reported-by: Liu Shiwei Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1045/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpufreq/loongson2_clock.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c index d7ca256e33ef..cefc6e259baf 100644 --- a/arch/mips/kernel/cpufreq/loongson2_clock.c +++ b/arch/mips/kernel/cpufreq/loongson2_clock.c @@ -164,3 +164,7 @@ void loongson2_cpu_wait(void) spin_unlock_irqrestore(&loongson2_wait_lock, flags); } EXPORT_SYMBOL_GPL(loongson2_cpu_wait); + +MODULE_AUTHOR("Yanhua "); +MODULE_DESCRIPTION("cpufreq driver for Loongson 2F"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 1e3fb3778be3c0a56626eba4a84f7d2fa991aa93 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 12 Mar 2010 19:39:48 +0000 Subject: MIPS: AR7: Fix phat finger of reset bit in vlynq_high_data Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3 (lmo) rsp. 8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7 to no longer get as far as init. Fixed my phat fingering. Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1064/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 246df7aca2e7..0bd5f67320be 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -168,7 +168,7 @@ static struct plat_vlynq_data vlynq_high_data = { .on = vlynq_on, .off = vlynq_off, }, - .reset_bit = 26, + .reset_bit = 16, .gpio_bit = 19, }; -- cgit v1.2.3 From 727c0075c80005e2012be113a91e5976abec4f9d Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Sat, 13 Mar 2010 00:09:15 +0000 Subject: MIPS: AR7: Fix phat finger of cpmac fixed_phy_add Seems I trimmed one too many lines in 29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp 7084338eb8eb0cc021ba86c340157bad397f3f0b (kernel.org) which led to no functioning Ethernet on my WAG54Gv2. This patch restores the AWOL line. Signed-off-by: Alexander Clouter To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1065/ Signed-off-by: Ralf Baechle --- arch/mips/ar7/platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 0bd5f67320be..2fafc78e5ce1 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -600,6 +600,7 @@ static int __init ar7_register_devices(void) } if (ar7_has_high_cpmac()) { + res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); if (!res) { cpmac_get_mac(1, cpmac_high_data.dev_addr); -- cgit v1.2.3 From 86f7d75eb7c43a54a7b37a2287787004f4310de6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 10 Mar 2010 09:51:09 +0100 Subject: MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET On AR7, we already redefine PHYS_OFFSET to match the system specifities, it is however not sufficient when unsing dma_{map,unmap}_single, specifically in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA to work correctly. This patch fixes the following issue, seen in cpmac_open: ops[#1]: Cpu 0 $ 0 : 00000000 10008400 a0f5b120 00000000 $ 4 : 94c59000 94270f64 00000020 00000010 $ 8 : 00000010 94103ce0 0000000a 94c03400 $12 : ffffffff 94c03408 94c03410 00000001 $16 : a0f5ba20 00000041 94c592c0 94c59200 $20 : 94c59000 000005ee 00002000 9438c8f0 $24 : 00000010 00000000 $28 : 94fac000 94fadd58 94390000 942724a8 Hi : 00000000 Lo : 00000001 epc : 94272518 cpmac_open+0x208/0x3f8 Not tainted ra : 942724a8 cpmac_open+0x198/0x3f8 Status: 10008403 KERNEL EXL IE Cause : 3080000c BadVA : 00000000 PrId : 00018448 (MIPS 4KEc) Modules linked in: Process ifconfig (pid: 278, threadinfo=94fac000, task=94e79590, tls=00000000) Stack : 7f8da120 2ab05cb0 94c59000 943356f0 00000000 943d0000 94c59000 943356f0 94c59030 943d0000 943c27c0 94fade10 00000000 94fade20 94c59000 9428e5a4 00000000 94c59000 00000041 94289768 94c59000 00000041 00001002 00001043 00000000 9428d810 00000000 94fade10 7f8da4e8 9428e6b8 00000000 7f8da4a8 7f8da4e8 00008914 00000000 942f7f2c 00000000 00000008 00408000 00008913 ... Call Trace: [<94272518>] cpmac_open+0x208/0x3f8 [<9428e5a4>] dev_open+0x164/0x264 [<9428d810>] dev_change_flags+0xd0/0x1bc [<942f7f2c>] devinet_ioctl+0x2d8/0x908 [<942771f8>] sock_ioctl+0x29c/0x2fc [<941a0fb4>] vfs_ioctl+0x2c/0x7c [<941a16ec>] do_vfs_ioctl+0x5dc/0x630 [<941a1790>] sys_ioctl+0x50/0x88 [<94101e10>] stack_done+0x20/0x3c Signed-off-by: peter fuerst Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1050/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index ac32572430f4..a16beafcea91 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -188,8 +188,10 @@ typedef struct { unsigned long pgprot; } pgprot_t; #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) -#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) +#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ + PHYS_OFFSET) +#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ + PHYS_OFFSET) #include #include -- cgit v1.2.3 From 847253b9483f713b3797877034e0940fd45ce375 Mon Sep 17 00:00:00 2001 From: Andreas Ferber Date: Tue, 16 Mar 2010 12:35:51 +0100 Subject: MIPS: Fix SSB PCIcore IO resource management The SSB PCIcore code reused the IO resource fixup code from the original 2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack for doing PCI IO resource configuration back then (the boot loader doesn't configure PCI devices on this platform). However, this code is no longer necessary since the kernel now can do PCI resource management fine all by itself, so remove the old code. When removing the code, it becomes obvious that the mem_offset setting in the PCIcore driver was wrong, however this was masked by the fixup code before, except in a few cases involving yenta_socket. For BCM47xx, the correct offset is 0, and since this is the only device using PCIcore in host mode, the offset can simply be removed unconditionally. Signed-off-by: Andreas Ferber Signed-off-by: Michael Buesch Cc: Markus Wigge Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1070/ Signed-off-by: Ralf Baechle --- drivers/ssb/driver_pcicore.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index f1dcd7969a5c..0e8d35224614 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore_controller = { .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, .mem_resource = &ssb_pcicore_mem_resource, - .mem_offset = 0x24000000, }; -static u32 ssb_pcicore_pcibus_iobase = 0x100; -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; - /* This function is called when doing a pci_enable_device(). * We must first check if the device is a device on the PCI-core bridge. */ int ssb_pcicore_plat_dev_init(struct pci_dev *d) { - struct resource *res; - int pos, size; - u32 *base; - if (d->bus->ops != &ssb_pcicore_pciops) { /* This is not a device on the PCI-core bridge. */ return -ENODEV; @@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci_dev *d) ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", pci_name(d)); - /* Fix up resource bases */ - for (pos = 0; pos < 6; pos++) { - res = &d->resource[pos]; - if (res->flags & IORESOURCE_IO) - base = &ssb_pcicore_pcibus_iobase; - else - base = &ssb_pcicore_pcibus_membase; - res->flags |= IORESOURCE_PCI_FIXED; - if (res->end) { - size = res->end - res->start + 1; - if (*base & (size - 1)) - *base = (*base + size) & ~(size - 1); - res->start = *base; - res->end = res->start + size - 1; - *base += size; - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); - } - /* Fix up PCI bridge BAR0 only */ - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) - break; - } /* Fix up interrupt lines */ d->irq = ssb_mips_irq(extpci_core->dev) + 2; pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -- cgit v1.2.3 From 58b9e2239fa63c7c470acb4a77e9da17e6a6fa4f Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 18 Feb 2010 16:13:03 -0800 Subject: MIPS: Add SYSCALL to uasm. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/976/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uasm.h | 1 + arch/mips/mm/uasm.c | 19 +++++++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h index b99bd07e199b..32fe2ec9f960 100644 --- a/arch/mips/include/asm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -102,6 +102,7 @@ Ip_0(_tlbwr); Ip_u3u1u2(_xor); Ip_u2u1u3(_xori); Ip_u2u1msbu3(_dins); +Ip_u1(_syscall); /* Handle labels. */ struct uasm_label { diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index 1581e9852461..d22d7bce02fb 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -31,7 +31,8 @@ enum fields { BIMM = 0x040, JIMM = 0x080, FUNC = 0x100, - SET = 0x200 + SET = 0x200, + SCIMM = 0x400 }; #define OP_MASK 0x3f @@ -52,6 +53,8 @@ enum fields { #define FUNC_SH 0 #define SET_MASK 0x7 #define SET_SH 0 +#define SCIMM_MASK 0xfffff +#define SCIMM_SH 6 enum opcode { insn_invalid, @@ -64,7 +67,7 @@ enum opcode { insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw, insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, - insn_dins + insn_dins, insn_syscall }; struct insn { @@ -136,6 +139,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD }, { insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE }, + { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM}, { insn_invalid, 0, 0 } }; @@ -208,6 +212,14 @@ static inline __cpuinit u32 build_jimm(u32 arg) return (arg >> 2) & JIMM_MASK; } +static inline __cpuinit u32 build_scimm(u32 arg) +{ + if (arg & ~SCIMM_MASK) + printk(KERN_WARNING "Micro-assembler field overflow\n"); + + return (arg & SCIMM_MASK) << SCIMM_SH; +} + static inline __cpuinit u32 build_func(u32 arg) { if (arg & ~FUNC_MASK) @@ -266,6 +278,8 @@ static void __cpuinit build_insn(u32 **buf, enum opcode opc, ...) op |= build_func(va_arg(ap, u32)); if (ip->fields & SET) op |= build_set(va_arg(ap, u32)); + if (ip->fields & SCIMM) + op |= build_scimm(va_arg(ap, u32)); va_end(ap); **buf = op; @@ -391,6 +405,7 @@ I_0(_tlbwr) I_u3u1u2(_xor) I_u2u1u3(_xori) I_u2u1msbu3(_dins); +I_u1(_syscall); /* Handle labels. */ void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid) -- cgit v1.2.3 From c52d0d30aef84aa8893b34e5254716c8ab5c4472 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 18 Feb 2010 16:13:04 -0800 Subject: MIPS: Preliminary VDSO This is a preliminary patch to add a vdso to all user processes. Still missing are ELF headers and .eh_frame information. But it is enough to allow us to move signal trampolines off of the stack. Note that emulation of branch delay slots in the FPU emulator still requires the stack. We allocate a single page (the vdso) and write all possible signal trampolines into it. The stack is moved down by one page and the vdso is mapped into this space. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/975/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/elf.h | 4 ++ arch/mips/include/asm/mmu.h | 5 +- arch/mips/include/asm/mmu_context.h | 2 +- arch/mips/include/asm/processor.h | 11 +++- arch/mips/include/asm/vdso.h | 29 ++++++++++ arch/mips/kernel/Makefile | 2 +- arch/mips/kernel/syscall.c | 6 +- arch/mips/kernel/vdso.c | 112 ++++++++++++++++++++++++++++++++++++ 8 files changed, 165 insertions(+), 6 deletions(-) create mode 100644 arch/mips/include/asm/vdso.h create mode 100644 arch/mips/kernel/vdso.c diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index 1184f6eea98b..ea77a42c5f8c 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -368,4 +368,8 @@ extern const char *__elf_platform; #define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) #endif +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int uses_interp); #endif /* _ASM_ELF_H */ diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h index 4063edd79623..c436138945a8 100644 --- a/arch/mips/include/asm/mmu.h +++ b/arch/mips/include/asm/mmu.h @@ -1,6 +1,9 @@ #ifndef __ASM_MMU_H #define __ASM_MMU_H -typedef unsigned long mm_context_t[NR_CPUS]; +typedef struct { + unsigned long asid[NR_CPUS]; + void *vdso; +} mm_context_t; #endif /* __ASM_MMU_H */ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 145bb81ccaa5..d9592733a7ba 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -104,7 +104,7 @@ extern unsigned long smtc_asid_mask; #endif -#define cpu_context(cpu, mm) ((mm)->context[cpu]) +#define cpu_context(cpu, mm) ((mm)->context.asid[cpu]) #define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) #define asid_cache(cpu) (cpu_data[cpu].asid_cache) diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 087a8884ef06..ab387910009a 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -33,13 +33,19 @@ extern void (*cpu_wait)(void); extern unsigned int vced_count, vcei_count; +/* + * A special page (the vdso) is mapped into all processes at the very + * top of the virtual memory space. + */ +#define SPECIAL_PAGES_SIZE PAGE_SIZE + #ifdef CONFIG_32BIT /* * User space process size: 2GB. This is hardcoded into a few places, * so don't change it unless you know what you are doing. */ #define TASK_SIZE 0x7fff8000UL -#define STACK_TOP TASK_SIZE +#define STACK_TOP ((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE) /* * This decides where the kernel will search for a free chunk of vm @@ -59,7 +65,8 @@ extern unsigned int vced_count, vcei_count; #define TASK_SIZE32 0x7fff8000UL #define TASK_SIZE 0x10000000000UL #define STACK_TOP \ - (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) + (((test_thread_flag(TIF_32BIT_ADDR) ? \ + TASK_SIZE32 : TASK_SIZE) & PAGE_MASK) - SPECIAL_PAGES_SIZE) /* * This decides where the kernel will search for a free chunk of vm diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h new file mode 100644 index 000000000000..cca56aa40ff4 --- /dev/null +++ b/arch/mips/include/asm/vdso.h @@ -0,0 +1,29 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#ifndef __ASM_VDSO_H +#define __ASM_VDSO_H + +#include + + +#ifdef CONFIG_32BIT +struct mips_vdso { + u32 signal_trampoline[2]; + u32 rt_signal_trampoline[2]; +}; +#else /* !CONFIG_32BIT */ +struct mips_vdso { + u32 o32_signal_trampoline[2]; + u32 o32_rt_signal_trampoline[2]; + u32 rt_signal_trampoline[2]; + u32 n32_rt_signal_trampoline[2]; +}; +#endif /* CONFIG_32BIT */ + +#endif /* __ASM_VDSO_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index ef20957ca14b..7a6ac501cbb5 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -6,7 +6,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o setup.o signal.o syscall.o \ - time.o topology.o traps.o unaligned.o watch.o + time.o topology.o traps.o unaligned.o watch.o vdso.o ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_ftrace.o = -pg diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 9587abc67f35..dd81b0f87518 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -79,7 +79,11 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, int do_color_align; unsigned long task_size; - task_size = STACK_TOP; +#ifdef CONFIG_32BIT + task_size = TASK_SIZE; +#else /* Must be CONFIG_64BIT*/ + task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE; +#endif if (len > task_size) return -ENOMEM; diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c new file mode 100644 index 000000000000..b773c1112b14 --- /dev/null +++ b/arch/mips/kernel/vdso.c @@ -0,0 +1,112 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009, 2010 Cavium Networks, Inc. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * Including would give use the 64-bit syscall numbers ... + */ +#define __NR_O32_sigreturn 4119 +#define __NR_O32_rt_sigreturn 4193 +#define __NR_N32_rt_sigreturn 6211 + +static struct page *vdso_page; + +static void __init install_trampoline(u32 *tramp, unsigned int sigreturn) +{ + uasm_i_addiu(&tramp, 2, 0, sigreturn); /* li v0, sigreturn */ + uasm_i_syscall(&tramp, 0); +} + +static int __init init_vdso(void) +{ + struct mips_vdso *vdso; + + vdso_page = alloc_page(GFP_KERNEL); + if (!vdso_page) + panic("Cannot allocate vdso"); + + vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL); + if (!vdso) + panic("Cannot map vdso"); + clear_page(vdso); + + install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn); +#ifdef CONFIG_32BIT + install_trampoline(vdso->signal_trampoline, __NR_sigreturn); +#else + install_trampoline(vdso->n32_rt_signal_trampoline, + __NR_N32_rt_sigreturn); + install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn); + install_trampoline(vdso->o32_rt_signal_trampoline, + __NR_O32_rt_sigreturn); +#endif + + vunmap(vdso); + + pr_notice("init_vdso successfull\n"); + + return 0; +} +device_initcall(init_vdso); + +static unsigned long vdso_addr(unsigned long start) +{ + return STACK_TOP; +} + +int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) +{ + int ret; + unsigned long addr; + struct mm_struct *mm = current->mm; + + down_write(&mm->mmap_sem); + + addr = vdso_addr(mm->start_stack); + + addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC| + VM_ALWAYSDUMP, + &vdso_page); + + if (ret) + goto up_fail; + + mm->context.vdso = (void *)addr; + +up_fail: + up_write(&mm->mmap_sem); + return ret; +} + +const char *arch_vma_name(struct vm_area_struct *vma) +{ + if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) + return "[vdso]"; + return NULL; +} -- cgit v1.2.3 From d814c28ceca8f659c0012eaec8e21eee43710716 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 18 Feb 2010 16:13:05 -0800 Subject: MIPS: Move signal trampolines off of the stack. This is a follow on to the vdso patch. Since all processes now have signal trampolines permanently mapped, we can use those instead of putting the trampoline on the stack and invalidating the corresponding icache across all CPUs. We also get rid of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code. [Ralf: GDB 7.1 which has the necessary modifications to allow backtracing over signal frames will supposedly be released tomorrow. The old signal frame format obsoleted by this patch exists in two variations, for sane processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR. So there was never a GDB which did support backtracing over signal frames on all MIPS systems. This convinved me this series should be applied and pushed upstream as soon as possible.] Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/974/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/abi.h | 6 ++- arch/mips/kernel/signal-common.h | 5 --- arch/mips/kernel/signal.c | 86 +++++++++------------------------------- arch/mips/kernel/signal32.c | 55 +++++++------------------ arch/mips/kernel/signal_n32.c | 26 +++--------- 5 files changed, 43 insertions(+), 135 deletions(-) diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h index 1dd74fbdc09b..9252d9b50e59 100644 --- a/arch/mips/include/asm/abi.h +++ b/arch/mips/include/asm/abi.h @@ -13,12 +13,14 @@ #include struct mips_abi { - int (* const setup_frame)(struct k_sigaction * ka, + int (* const setup_frame)(void *sig_return, struct k_sigaction *ka, struct pt_regs *regs, int signr, sigset_t *set); - int (* const setup_rt_frame)(struct k_sigaction * ka, + const unsigned long signal_return_offset; + int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info); + const unsigned long rt_signal_return_offset; const unsigned long restart; }; diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 6c8e8c4246f7..10263b405981 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -26,11 +26,6 @@ */ extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size); -/* - * install trampoline code to get back from the sig handler - */ -extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall); - /* Check and clear pending FPU exceptions in saved CSR */ extern int fpcsr_pending(unsigned int __user *fpcsr); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index d0c68b5d717b..2099d5a4c4b7 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "signal-common.h" @@ -44,47 +45,20 @@ extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc); extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc); extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc); -/* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - struct sigframe { u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_code[2]; /* signal trampoline */ + u32 sf_pad[2]; /* Was: signal trampoline */ struct sigcontext sf_sc; sigset_t sf_mask; }; struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ - u32 rs_code[2]; /* signal trampoline */ + u32 rs_pad[2]; /* Was: signal trampoline */ struct siginfo rs_info; struct ucontext rs_uc; }; -#else - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_pad[2]; - struct sigcontext sf_sc; /* hw context */ - sigset_t sf_mask; - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -struct rt_sigframe { - u32 rs_ass[4]; /* argument save space for o32 */ - u32 rs_pad[2]; - struct siginfo rs_info; - struct ucontext rs_uc; - u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -#endif - /* * Helper routines */ @@ -266,32 +240,6 @@ void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK)); } -int install_sigtramp(unsigned int __user *tramp, unsigned int syscall) -{ - int err; - - /* - * Set up the return code ... - * - * li v0, __NR__foo_sigreturn - * syscall - */ - - err = __put_user(0x24020000 + syscall, tramp + 0); - err |= __put_user(0x0000000c , tramp + 1); - if (ICACHE_REFILLS_WORKAROUND_WAR) { - err |= __put_user(0, tramp + 2); - err |= __put_user(0, tramp + 3); - err |= __put_user(0, tramp + 4); - err |= __put_user(0, tramp + 5); - err |= __put_user(0, tramp + 6); - err |= __put_user(0, tramp + 7); - } - flush_cache_sigtramp((unsigned long) tramp); - - return err; -} - /* * Atomically swap in the new signal mask, and wait for a signal. */ @@ -484,8 +432,8 @@ badframe: } #ifdef CONFIG_TRAD_SIGNALS -static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set) +static int setup_frame(void *sig_return, struct k_sigaction *ka, + struct pt_regs *regs, int signr, sigset_t *set) { struct sigframe __user *frame; int err = 0; @@ -494,8 +442,6 @@ static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - err |= install_sigtramp(frame->sf_code, __NR_sigreturn); - err |= setup_sigcontext(regs, &frame->sf_sc); err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); if (err) @@ -515,7 +461,7 @@ static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[ 5] = 0; regs->regs[ 6] = (unsigned long) &frame->sf_sc; regs->regs[29] = (unsigned long) frame; - regs->regs[31] = (unsigned long) frame->sf_code; + regs->regs[31] = (unsigned long) sig_return; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", @@ -529,8 +475,9 @@ give_sigsegv: } #endif -static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set, siginfo_t *info) +static int setup_rt_frame(void *sig_return, struct k_sigaction *ka, + struct pt_regs *regs, int signr, sigset_t *set, + siginfo_t *info) { struct rt_sigframe __user *frame; int err = 0; @@ -539,8 +486,6 @@ static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - err |= install_sigtramp(frame->rs_code, __NR_rt_sigreturn); - /* Create siginfo. */ err |= copy_siginfo_to_user(&frame->rs_info, info); @@ -573,7 +518,7 @@ static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[ 5] = (unsigned long) &frame->rs_info; regs->regs[ 6] = (unsigned long) &frame->rs_uc; regs->regs[29] = (unsigned long) frame; - regs->regs[31] = (unsigned long) frame->rs_code; + regs->regs[31] = (unsigned long) sig_return; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", @@ -590,8 +535,11 @@ give_sigsegv: struct mips_abi mips_abi = { #ifdef CONFIG_TRAD_SIGNALS .setup_frame = setup_frame, + .signal_return_offset = offsetof(struct mips_vdso, signal_trampoline), #endif .setup_rt_frame = setup_rt_frame, + .rt_signal_return_offset = + offsetof(struct mips_vdso, rt_signal_trampoline), .restart = __NR_restart_syscall }; @@ -599,6 +547,8 @@ static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { int ret; + struct mips_abi *abi = current->thread.abi; + void *vdso = current->mm->context.vdso; switch(regs->regs[0]) { case ERESTART_RESTARTBLOCK: @@ -619,9 +569,11 @@ static int handle_signal(unsigned long sig, siginfo_t *info, regs->regs[0] = 0; /* Don't deal with this again. */ if (sig_uses_siginfo(ka)) - ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info); + ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset, + ka, regs, sig, oldset, info); else - ret = current->thread.abi->setup_frame(ka, regs, sig, oldset); + ret = abi->setup_frame(vdso + abi->signal_return_offset, + ka, regs, sig, oldset); spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 03abaf048f09..a0ed0e052b2e 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "signal-common.h" @@ -47,8 +48,6 @@ extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user /* * Including would give use the 64-bit syscall numbers ... */ -#define __NR_O32_sigreturn 4119 -#define __NR_O32_rt_sigreturn 4193 #define __NR_O32_restart_syscall 4253 /* 32-bit compatibility types */ @@ -77,47 +76,20 @@ struct ucontext32 { compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; -/* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - struct sigframe32 { u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_code[2]; /* signal trampoline */ + u32 sf_pad[2]; /* Was: signal trampoline */ struct sigcontext32 sf_sc; compat_sigset_t sf_mask; }; struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ - u32 rs_code[2]; /* signal trampoline */ + u32 rs_pad[2]; /* Was: signal trampoline */ compat_siginfo_t rs_info; struct ucontext32 rs_uc; }; -#else /* ICACHE_REFILLS_WORKAROUND_WAR */ - -struct sigframe32 { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_pad[2]; - struct sigcontext32 sf_sc; /* hw context */ - compat_sigset_t sf_mask; - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -struct rt_sigframe32 { - u32 rs_ass[4]; /* argument save space for o32 */ - u32 rs_pad[2]; - compat_siginfo_t rs_info; - struct ucontext32 rs_uc; - u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */ -}; - -#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ - /* * sigcontext handlers */ @@ -598,8 +570,8 @@ badframe: force_sig(SIGSEGV, current); } -static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set) +static int setup_frame_32(void *sig_return, struct k_sigaction *ka, + struct pt_regs *regs, int signr, sigset_t *set) { struct sigframe32 __user *frame; int err = 0; @@ -608,8 +580,6 @@ static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn); - err |= setup_sigcontext32(regs, &frame->sf_sc); err |= __copy_conv_sigset_to_user(&frame->sf_mask, set); @@ -630,7 +600,7 @@ static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[ 5] = 0; regs->regs[ 6] = (unsigned long) &frame->sf_sc; regs->regs[29] = (unsigned long) frame; - regs->regs[31] = (unsigned long) frame->sf_code; + regs->regs[31] = (unsigned long) sig_return; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", @@ -644,8 +614,9 @@ give_sigsegv: return -EFAULT; } -static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set, siginfo_t *info) +static int setup_rt_frame_32(void *sig_return, struct k_sigaction *ka, + struct pt_regs *regs, int signr, sigset_t *set, + siginfo_t *info) { struct rt_sigframe32 __user *frame; int err = 0; @@ -655,8 +626,6 @@ static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - err |= install_sigtramp(frame->rs_code, __NR_O32_rt_sigreturn); - /* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */ err |= copy_siginfo_to_user32(&frame->rs_info, info); @@ -690,7 +659,7 @@ static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[ 5] = (unsigned long) &frame->rs_info; regs->regs[ 6] = (unsigned long) &frame->rs_uc; regs->regs[29] = (unsigned long) frame; - regs->regs[31] = (unsigned long) frame->rs_code; + regs->regs[31] = (unsigned long) sig_return; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", @@ -709,7 +678,11 @@ give_sigsegv: */ struct mips_abi mips_abi_32 = { .setup_frame = setup_frame_32, + .signal_return_offset = + offsetof(struct mips_vdso, o32_signal_trampoline), .setup_rt_frame = setup_rt_frame_32, + .rt_signal_return_offset = + offsetof(struct mips_vdso, o32_rt_signal_trampoline), .restart = __NR_O32_restart_syscall }; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index bb277e82d421..2c5df818c65a 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -39,13 +39,13 @@ #include #include #include +#include #include "signal-common.h" /* * Including would give use the 64-bit syscall numbers ... */ -#define __NR_N32_rt_sigreturn 6211 #define __NR_N32_restart_syscall 6214 extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); @@ -67,27 +67,13 @@ struct ucontextn32 { compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - -struct rt_sigframe_n32 { - u32 rs_ass[4]; /* argument save space for o32 */ - u32 rs_code[2]; /* signal trampoline */ - struct compat_siginfo rs_info; - struct ucontextn32 rs_uc; -}; - -#else /* ICACHE_REFILLS_WORKAROUND_WAR */ - struct rt_sigframe_n32 { u32 rs_ass[4]; /* argument save space for o32 */ - u32 rs_pad[2]; + u32 rs_pad[2]; /* Was: signal trampoline */ struct compat_siginfo rs_info; struct ucontextn32 rs_uc; - u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */ }; -#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ - extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat); asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) @@ -173,7 +159,7 @@ badframe: force_sig(SIGSEGV, current); } -static int setup_rt_frame_n32(struct k_sigaction * ka, +static int setup_rt_frame_n32(void *sig_return, struct k_sigaction *ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe_n32 __user *frame; @@ -184,8 +170,6 @@ static int setup_rt_frame_n32(struct k_sigaction * ka, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn); - /* Create siginfo. */ err |= copy_siginfo_to_user32(&frame->rs_info, info); @@ -219,7 +203,7 @@ static int setup_rt_frame_n32(struct k_sigaction * ka, regs->regs[ 5] = (unsigned long) &frame->rs_info; regs->regs[ 6] = (unsigned long) &frame->rs_uc; regs->regs[29] = (unsigned long) frame; - regs->regs[31] = (unsigned long) frame->rs_code; + regs->regs[31] = (unsigned long) sig_return; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", @@ -235,5 +219,7 @@ give_sigsegv: struct mips_abi mips_abi_n32 = { .setup_rt_frame = setup_rt_frame_n32, + .rt_signal_return_offset = + offsetof(struct mips_vdso, n32_rt_signal_trampoline), .restart = __NR_N32_restart_syscall }; -- cgit v1.2.3 From f1df323924e2fde14cbcd51209a8cbfc33e0c232 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 13 Mar 2010 12:34:15 +0800 Subject: MIPS: Loongson-2F: Flush the branch target history in BTB and RAS As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work around the Loongson 2F erratum we need to do: "When switching from user mode to kernel mode, you should flush the branch target history such as BTB and RAS." [1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211 [2] English version of chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: Shinya Kuribayashi Patchwork: http://patchwork.linux-mips.org/patch/1066/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/stackframe.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index 3b6da3330e32..c8419129e770 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -121,6 +121,25 @@ .endm #else .macro get_saved_sp /* Uniprocessor variation */ +#ifdef CONFIG_CPU_LOONGSON2F + /* + * Clear BTB (branch target buffer), forbid RAS (return address + * stack) to workaround the Out-of-order Issue in Loongson2F + * via its diagnostic register. + */ + move k0, ra + jal 1f + nop +1: jal 1f + nop +1: jal 1f + nop +1: jal 1f + nop +1: move ra, k0 + li k0, 3 + mtc0 k0, $22 +#endif /* CONFIG_CPU_LOONGSON2F */ #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) lui k1, %hi(kernelsp) #else -- cgit v1.2.3 From b44c779ae0dedf3a6503c253954e570361b33f2b Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 27 Feb 2010 17:51:23 +0100 Subject: MIPS: libgcc.h: Checkpatch cleanup arch/mips/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line Signed-off-by: Andrea Gelmini To: linux-kernel@vger.kernel.org Cc: Paul Mundt Cc: linux-mips@linux-mips.org Cc: linux-sh@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1007/ Signed-off-by: Ralf Baechle --- arch/mips/lib/libgcc.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h index 3f19d1c5d942..05909d58e2fe 100644 --- a/arch/mips/lib/libgcc.h +++ b/arch/mips/lib/libgcc.h @@ -17,8 +17,7 @@ struct DWstruct { #error I feel sick. #endif -typedef union -{ +typedef union { struct DWstruct s; long long ll; } DWunion; -- cgit v1.2.3 From d1b28758c6b46f6d04ef6017b51f614aecdb4abe Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 1 Mar 2010 23:36:32 +0100 Subject: MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count The number of GPIOs on BCM6338 is 8, while BCM6345 has only 16 GPIOs available. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1016/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h index 76a0b7216af5..43d4da0b1e9f 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -10,6 +10,10 @@ static inline unsigned long bcm63xx_gpio_count(void) switch (bcm63xx_get_cpu_id()) { case BCM6358_CPU_ID: return 40; + case BCM6338_CPU_ID: + return 8; + case BCM6345_CPU_ID: + return 16; case BCM6348_CPU_ID: default: return 37; -- cgit v1.2.3 From 2e6ad9a9585b5520cddda4743bfbfdf7f11c5a50 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 1 Mar 2010 23:36:22 +0100 Subject: MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1014/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index ea17941168ca..874bbdb2d939 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -368,6 +368,25 @@ static struct board_info __initdata board_FAST2404 = { .has_ehci0 = 1, }; +static struct board_info __initdata board_rta1025w_16 = { + .name = "RTA1025W_16", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, +}; + + static struct board_info __initdata board_DV201AMR = { .name = "DV201AMR", .expected_cpu_id = 0x6348, @@ -552,6 +571,7 @@ static const struct board_info __initdata *bcm963xx_boards[] = { &board_FAST2404, &board_DV201AMR, &board_96348gw_a, + &board_rta1025w_16, #endif #ifdef CONFIG_BCM63XX_CPU_6358 -- cgit v1.2.3 From f29b7cac19ef5aa093fc9403d10735fa72cabf99 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 1 Mar 2010 23:36:27 +0100 Subject: MIPS: BCM63xx: Add DWVS0 board The DWVS0 board is a BCM6358-based board with an on-board OHCI controler. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1015/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 874bbdb2d939..a690afb4ee8d 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -550,6 +550,27 @@ static struct board_info __initdata board_AGPFS0 = { .has_ohci0 = 1, .has_ehci0 = 1, }; + +static struct board_info __initdata board_DWVS0 = { + .name = "DWV-S0", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, +}; #endif /* @@ -578,6 +599,7 @@ static const struct board_info __initdata *bcm963xx_boards[] = { &board_96358vw, &board_96358vw2, &board_AGPFS0, + &board_DWVS0, #endif }; -- cgit v1.2.3 From 97befcf4f0f42b1644b4b164ddc363685546edcd Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sat, 30 Jan 2010 18:34:54 +0100 Subject: MIPS: BCM63xx: Fix double gpio registration. bcm63xx_gpio_init is already called from prom_init to allow board to use them early, so we can remove the unneeded arch_initcall. Signed-off-by: Maxime Bizon To: linux-mips@linux-mips.org Cc: Maxime Bizon Patchwork: http://patchwork.linux-mips.org/patch/899/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/gpio.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c index 87ca39046334..37253452d396 100644 --- a/arch/mips/bcm63xx/gpio.c +++ b/arch/mips/bcm63xx/gpio.c @@ -130,5 +130,3 @@ int __init bcm63xx_gpio_init(void) return gpiochip_add(&bcm63xx_gpio_chip); } - -arch_initcall(bcm63xx_gpio_init); -- cgit v1.2.3 From 524ef29cff593ab6635cda2a17b331bede58a396 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sat, 30 Jan 2010 18:34:55 +0100 Subject: MIPS: BCM63xx: Add support for second uart. The BCm63xx SOC has two uarts. Some boards use the second one for bluetooth. This patch changes platform device registration code to handle this. Changes to the UART driver were already merged in 6a2c7eabfd09ca7986bf96b8958a87ca041a19d8. Signed-off-by: Maxime Bizon To: linux-mips@linux-mips.org Cc: Maxime Bizon Patchwork: http://patchwork.linux-mips.org/patch/900/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 27 ++++++++- arch/mips/bcm63xx/cpu.c | 5 ++ arch/mips/bcm63xx/dev-uart.c | 66 ++++++++++++++++------ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 15 +++++ .../include/asm/mach-bcm63xx/bcm63xx_dev_uart.h | 6 ++ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 + 6 files changed, 102 insertions(+), 19 deletions(-) create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index a690afb4ee8d..8b0abcb4838e 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -40,6 +41,7 @@ static struct board_info __initdata board_96338gw = { .name = "96338GW", .expected_cpu_id = 0x6338, + .has_uart0 = 1, .has_enet0 = 1, .enet0 = { .force_speed_100 = 1, @@ -82,6 +84,7 @@ static struct board_info __initdata board_96338w = { .name = "96338W", .expected_cpu_id = 0x6338, + .has_uart0 = 1, .has_enet0 = 1, .enet0 = { .force_speed_100 = 1, @@ -126,6 +129,8 @@ static struct board_info __initdata board_96338w = { static struct board_info __initdata board_96345gw2 = { .name = "96345GW2", .expected_cpu_id = 0x6345, + + .has_uart0 = 1, }; #endif @@ -137,6 +142,7 @@ static struct board_info __initdata board_96348r = { .name = "96348R", .expected_cpu_id = 0x6348, + .has_uart0 = 1, .has_enet0 = 1, .has_pci = 1, @@ -180,6 +186,7 @@ static struct board_info __initdata board_96348gw_10 = { .name = "96348GW-10", .expected_cpu_id = 0x6348, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -239,6 +246,7 @@ static struct board_info __initdata board_96348gw_11 = { .name = "96348GW-11", .expected_cpu_id = 0x6348, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -292,6 +300,7 @@ static struct board_info __initdata board_96348gw = { .name = "96348GW", .expected_cpu_id = 0x6348, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -349,9 +358,10 @@ static struct board_info __initdata board_FAST2404 = { .name = "F@ST2404", .expected_cpu_id = 0x6348, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, + .has_uart0 = 1, + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, .enet0 = { .has_phy = 1, @@ -391,6 +401,7 @@ static struct board_info __initdata board_DV201AMR = { .name = "DV201AMR", .expected_cpu_id = 0x6348, + .has_uart0 = 1, .has_pci = 1, .has_ohci0 = 1, @@ -410,6 +421,7 @@ static struct board_info __initdata board_96348gw_a = { .name = "96348GW-A", .expected_cpu_id = 0x6348, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -435,6 +447,7 @@ static struct board_info __initdata board_96358vw = { .name = "96358VW", .expected_cpu_id = 0x6358, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -486,6 +499,7 @@ static struct board_info __initdata board_96358vw2 = { .name = "96358VW2", .expected_cpu_id = 0x6358, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -533,6 +547,7 @@ static struct board_info __initdata board_AGPFS0 = { .name = "AGPF-S0", .expected_cpu_id = 0x6358, + .has_uart0 = 1, .has_enet0 = 1, .has_enet1 = 1, .has_pci = 1, @@ -834,6 +849,12 @@ int __init board_register_devices(void) { u32 val; + if (board.has_uart0) + bcm63xx_uart_register(0); + + if (board.has_uart1) + bcm63xx_uart_register(1); + if (board.has_pccard) bcm63xx_pcmcia_register(); diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index 70378bb5e3f9..cbb7caf86d77 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -36,6 +36,7 @@ static const unsigned long bcm96338_regs_base[] = { [RSET_TIMER] = BCM_6338_TIMER_BASE, [RSET_WDT] = BCM_6338_WDT_BASE, [RSET_UART0] = BCM_6338_UART0_BASE, + [RSET_UART1] = BCM_6338_UART1_BASE, [RSET_GPIO] = BCM_6338_GPIO_BASE, [RSET_SPI] = BCM_6338_SPI_BASE, [RSET_OHCI0] = BCM_6338_OHCI0_BASE, @@ -72,6 +73,7 @@ static const unsigned long bcm96345_regs_base[] = { [RSET_TIMER] = BCM_6345_TIMER_BASE, [RSET_WDT] = BCM_6345_WDT_BASE, [RSET_UART0] = BCM_6345_UART0_BASE, + [RSET_UART1] = BCM_6345_UART1_BASE, [RSET_GPIO] = BCM_6345_GPIO_BASE, [RSET_SPI] = BCM_6345_SPI_BASE, [RSET_UDC0] = BCM_6345_UDC0_BASE, @@ -109,6 +111,7 @@ static const unsigned long bcm96348_regs_base[] = { [RSET_TIMER] = BCM_6348_TIMER_BASE, [RSET_WDT] = BCM_6348_WDT_BASE, [RSET_UART0] = BCM_6348_UART0_BASE, + [RSET_UART1] = BCM_6348_UART1_BASE, [RSET_GPIO] = BCM_6348_GPIO_BASE, [RSET_SPI] = BCM_6348_SPI_BASE, [RSET_OHCI0] = BCM_6348_OHCI0_BASE, @@ -150,6 +153,7 @@ static const unsigned long bcm96358_regs_base[] = { [RSET_TIMER] = BCM_6358_TIMER_BASE, [RSET_WDT] = BCM_6358_WDT_BASE, [RSET_UART0] = BCM_6358_UART0_BASE, + [RSET_UART1] = BCM_6358_UART1_BASE, [RSET_GPIO] = BCM_6358_GPIO_BASE, [RSET_SPI] = BCM_6358_SPI_BASE, [RSET_OHCI0] = BCM_6358_OHCI0_BASE, @@ -170,6 +174,7 @@ static const unsigned long bcm96358_regs_base[] = { static const int bcm96358_irqs[] = { [IRQ_TIMER] = BCM_6358_TIMER_IRQ, [IRQ_UART0] = BCM_6358_UART0_IRQ, + [IRQ_UART1] = BCM_6358_UART1_IRQ, [IRQ_DSL] = BCM_6358_DSL_IRQ, [IRQ_ENET0] = BCM_6358_ENET0_IRQ, [IRQ_ENET1] = BCM_6358_ENET1_IRQ, diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c index b0519461ad9b..c2963da0253e 100644 --- a/arch/mips/bcm63xx/dev-uart.c +++ b/arch/mips/bcm63xx/dev-uart.c @@ -11,31 +11,65 @@ #include #include -static struct resource uart_resources[] = { +static struct resource uart0_resources[] = { { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ + /* start & end filled at runtime */ .flags = IORESOURCE_MEM, }, { - .start = -1, /* filled at runtime */ + /* start filled at runtime */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bcm63xx_uart_device = { - .name = "bcm63xx_uart", - .id = 0, - .num_resources = ARRAY_SIZE(uart_resources), - .resource = uart_resources, +static struct resource uart1_resources[] = { + { + /* start & end filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + /* start filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bcm63xx_uart_devices[] = { + { + .name = "bcm63xx_uart", + .id = 0, + .num_resources = ARRAY_SIZE(uart0_resources), + .resource = uart0_resources, + }, + + { + .name = "bcm63xx_uart", + .id = 1, + .num_resources = ARRAY_SIZE(uart1_resources), + .resource = uart1_resources, + } }; -int __init bcm63xx_uart_register(void) +int __init bcm63xx_uart_register(unsigned int id) { - uart_resources[0].start = bcm63xx_regset_address(RSET_UART0); - uart_resources[0].end = uart_resources[0].start; - uart_resources[0].end += RSET_UART_SIZE - 1; - uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); - return platform_device_register(&bcm63xx_uart_device); + if (id >= ARRAY_SIZE(bcm63xx_uart_devices)) + return -ENODEV; + + if (id == 1 && !BCMCPU_IS_6358()) + return -ENODEV; + + if (id == 0) { + uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0); + uart0_resources[0].end = uart0_resources[0].start + + RSET_UART_SIZE - 1; + uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); + } + + if (id == 1) { + uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1); + uart1_resources[0].end = uart1_resources[0].start + + RSET_UART_SIZE - 1; + uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1); + } + + return platform_device_register(&bcm63xx_uart_devices[id]); } -arch_initcall(bcm63xx_uart_register); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h index b12c4aca2cc9..96a2391ad85b 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -85,6 +85,7 @@ enum bcm63xx_regs_set { RSET_TIMER, RSET_WDT, RSET_UART0, + RSET_UART1, RSET_GPIO, RSET_SPI, RSET_UDC0, @@ -123,6 +124,7 @@ enum bcm63xx_regs_set { #define BCM_6338_TIMER_BASE (0xfffe0200) #define BCM_6338_WDT_BASE (0xfffe021c) #define BCM_6338_UART0_BASE (0xfffe0300) +#define BCM_6338_UART1_BASE (0xdeadbeef) #define BCM_6338_GPIO_BASE (0xfffe0400) #define BCM_6338_SPI_BASE (0xfffe0c00) #define BCM_6338_UDC0_BASE (0xdeadbeef) @@ -153,6 +155,7 @@ enum bcm63xx_regs_set { #define BCM_6345_TIMER_BASE (0xfffe0200) #define BCM_6345_WDT_BASE (0xfffe021c) #define BCM_6345_UART0_BASE (0xfffe0300) +#define BCM_6345_UART1_BASE (0xdeadbeef) #define BCM_6345_GPIO_BASE (0xfffe0400) #define BCM_6345_SPI_BASE (0xdeadbeef) #define BCM_6345_UDC0_BASE (0xdeadbeef) @@ -182,6 +185,7 @@ enum bcm63xx_regs_set { #define BCM_6348_TIMER_BASE (0xfffe0200) #define BCM_6348_WDT_BASE (0xfffe021c) #define BCM_6348_UART0_BASE (0xfffe0300) +#define BCM_6348_UART1_BASE (0xdeadbeef) #define BCM_6348_GPIO_BASE (0xfffe0400) #define BCM_6348_SPI_BASE (0xfffe0c00) #define BCM_6348_UDC0_BASE (0xfffe1000) @@ -208,6 +212,7 @@ enum bcm63xx_regs_set { #define BCM_6358_TIMER_BASE (0xfffe0040) #define BCM_6358_WDT_BASE (0xfffe005c) #define BCM_6358_UART0_BASE (0xfffe0100) +#define BCM_6358_UART1_BASE (0xfffe0120) #define BCM_6358_GPIO_BASE (0xfffe0080) #define BCM_6358_SPI_BASE (0xdeadbeef) #define BCM_6358_UDC0_BASE (0xfffe0800) @@ -246,6 +251,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) return BCM_6338_WDT_BASE; case RSET_UART0: return BCM_6338_UART0_BASE; + case RSET_UART1: + return BCM_6338_UART1_BASE; case RSET_GPIO: return BCM_6338_GPIO_BASE; case RSET_SPI: @@ -292,6 +299,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) return BCM_6345_WDT_BASE; case RSET_UART0: return BCM_6345_UART0_BASE; + case RSET_UART1: + return BCM_6345_UART1_BASE; case RSET_GPIO: return BCM_6345_GPIO_BASE; case RSET_SPI: @@ -338,6 +347,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) return BCM_6348_WDT_BASE; case RSET_UART0: return BCM_6348_UART0_BASE; + case RSET_UART1: + return BCM_6348_UART1_BASE; case RSET_GPIO: return BCM_6348_GPIO_BASE; case RSET_SPI: @@ -384,6 +395,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) return BCM_6358_WDT_BASE; case RSET_UART0: return BCM_6358_UART0_BASE; + case RSET_UART1: + return BCM_6358_UART1_BASE; case RSET_GPIO: return BCM_6358_GPIO_BASE; case RSET_SPI: @@ -429,6 +442,7 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) enum bcm63xx_irq { IRQ_TIMER = 0, IRQ_UART0, + IRQ_UART1, IRQ_DSL, IRQ_ENET0, IRQ_ENET1, @@ -510,6 +524,7 @@ enum bcm63xx_irq { */ #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3) #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) #define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) #define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h new file mode 100644 index 000000000000..23c705baf171 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h @@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_UART_H_ +#define BCM63XX_DEV_UART_H_ + +int bcm63xx_uart_register(unsigned int id); + +#endif /* BCM63XX_DEV_UART_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h index 6479090a4106..474daaa53497 100644 --- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h +++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h @@ -45,6 +45,8 @@ struct board_info { unsigned int has_ohci0:1; unsigned int has_ehci0:1; unsigned int has_dsp:1; + unsigned int has_uart0:1; + unsigned int has_uart1:1; /* ethernet config */ struct bcm63xx_enet_platform_data enet0; -- cgit v1.2.3 From 4fe67e44a0e0cb6281cbaaf603111187d87fce57 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sat, 30 Jan 2010 18:34:56 +0100 Subject: MIPS: BCM63xx: Fix typo in cpu-feature-overrides file. Fix typo: CONFIG_BCMCPU_IS_63xx does not exist; CONFIG_BCM63XX_CPU_63xx is the valid config option. Signed-off-by: Maxime Bizon To: linux-mips@linux-mips.org Cc: Maxime Bizon Patchwork: http://patchwork.linux-mips.org/patch/901/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h index 71742bac940d..f453c01d0672 100644 --- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h @@ -24,7 +24,7 @@ #define cpu_has_smartmips 0 #define cpu_has_vtag_icache 0 -#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345)) +#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338)) #define cpu_has_dc_aliases 0 #endif -- cgit v1.2.3 From e23a90eb736b18c16fd6d59e8c1fa6a16ac3bc0b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 2 Mar 2010 14:38:47 +0100 Subject: MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback Signed-off-by: Florian Fainelli To: Maxime Bizon Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1017/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 8b0abcb4838e..5addb9c6fb0b 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -716,6 +716,17 @@ void __init board_prom_init(void) } bcm_gpio_writel(val, GPIO_MODE_REG); + + /* Generate MAC address for WLAN and + * register our SPROM */ +#ifdef CONFIG_SSB_PCIHOST + if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { + memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); + memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); + if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) + printk(KERN_ERR "failed to register fallback SPROM\n"); + } +#endif } /* @@ -869,17 +880,6 @@ int __init board_register_devices(void) if (board.has_dsp) bcm63xx_dsp_register(&board.dsp); - /* Generate MAC address for WLAN and - * register our SPROM */ -#ifdef CONFIG_SSB_PCIHOST - if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { - memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); - if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) - printk(KERN_ERR "failed to register fallback SPROM\n"); - } -#endif - /* read base address of boot chip select (0) */ if (BCMCPU_IS_6345()) val = 0x1fc00000; -- cgit v1.2.3 From 9538ca636f2fa28ae1514327328e2869f0215981 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sat, 30 Jan 2010 18:34:58 +0100 Subject: MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot. To avoid a glitch during GPIO initialisation read GPIO output register values left by the firmware. Signed-off-by: Maxime Bizon To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/903/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/gpio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c index 37253452d396..315bc7f79ce1 100644 --- a/arch/mips/bcm63xx/gpio.c +++ b/arch/mips/bcm63xx/gpio.c @@ -125,6 +125,8 @@ static struct gpio_chip bcm63xx_gpio_chip = { int __init bcm63xx_gpio_init(void) { + gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG); + gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG); bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio); -- cgit v1.2.3 From 8d9df29db273ab9a330828f4f4f6669d293a730a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 23 Mar 2010 00:02:43 +0100 Subject: MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions. Previously it was unconditionally used on all Sibyte family SOCs. The M3 bug has to be handled in the TLB exception handler which is extremly performance sensitive, so this modification is expected to deliver around 2-3% performance improvment. This is important as required changes to the M3 workaround will make it more costly. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-sibyte/war.h | 6 +++++- arch/mips/sibyte/sb1250/setup.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h index 7950ef4f032c..743385d7b5f2 100644 --- a/arch/mips/include/asm/mach-sibyte/war.h +++ b/arch/mips/include/asm/mach-sibyte/war.h @@ -16,7 +16,11 @@ #if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \ defined(CONFIG_SB1_PASS_2_WORKAROUNDS) -#define BCM1250_M3_WAR 1 +#ifndef __ASSEMBLY__ +extern int sb1250_m3_workaround_needed(void); +#endif + +#define BCM1250_M3_WAR sb1250_m3_workaround_needed() #define SIBYTE_1956_WAR 1 #else diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c index 0444da1e23c2..92da3155ce07 100644 --- a/arch/mips/sibyte/sb1250/setup.c +++ b/arch/mips/sibyte/sb1250/setup.c @@ -87,6 +87,21 @@ static int __init setup_bcm1250(void) return ret; } +int sb1250_m3_workaround_needed(void) +{ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + case K_SYS_SOC_TYPE_BCM1125: + case K_SYS_SOC_TYPE_BCM1125H: + return soc_pass < K_SYS_REVISION_BCM1250_C0; + + default: + return 0; + } +} + static int __init setup_bcm112x(void) { int ret = 0; -- cgit v1.2.3 From 5808184f1b2fe06ef8a54a2b7fb1596d58098acf Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 23 Mar 2010 15:54:50 +0100 Subject: MIPS: uasm: Add OR instruction. This is needed for the fix of the M3 workaround. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uasm.h | 1 + arch/mips/mm/uasm.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h index 32fe2ec9f960..11a8b5252549 100644 --- a/arch/mips/include/asm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -84,6 +84,7 @@ Ip_u2s3u1(_lw); Ip_u1u2u3(_mfc0); Ip_u1u2u3(_mtc0); Ip_u2u1u3(_ori); +Ip_u3u1u2(_or); Ip_u2s3u1(_pref); Ip_0(_rfe); Ip_u2s3u1(_sc); diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index d22d7bce02fb..611d564fdcf1 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -64,7 +64,7 @@ enum opcode { insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, - insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, + insn_mtc0, insn_or, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw, insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins, insn_syscall @@ -120,6 +120,7 @@ static struct insn insn_table[] __cpuinitdata = { { insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET}, { insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET}, + { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD }, { insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, { insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 }, @@ -387,6 +388,7 @@ I_u2s3u1(_lw) I_u1u2u3(_mfc0) I_u1u2u3(_mtc0) I_u2u1u3(_ori) +I_u3u1u2(_or) I_u2s3u1(_pref) I_0(_rfe) I_u2s3u1(_sc) -- cgit v1.2.3 From 5e3644a95db11e2e582ae3765ffad6e0cce5376e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 23 Mar 2010 10:30:08 +0100 Subject: MIPS: BCM63xx: Fix build failure in board_bcm963xx.c Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered in the board_prom_init callback, but it references variables and functions which are declared below. Move the variables and functions above board_prom_init. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1077/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 140 +++++++++++++++--------------- 1 file changed, 70 insertions(+), 70 deletions(-) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 5addb9c6fb0b..8dba8cfb752f 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -618,6 +618,76 @@ static const struct board_info __initdata *bcm963xx_boards[] = { #endif }; +/* + * Register a sane SPROMv2 to make the on-board + * bcm4318 WLAN work + */ +#ifdef CONFIG_SSB_PCIHOST +static struct ssb_sprom bcm63xx_sprom = { + .revision = 0x02, + .board_rev = 0x17, + .country_code = 0x0, + .ant_available_bg = 0x3, + .pa0b0 = 0x15ae, + .pa0b1 = 0xfa85, + .pa0b2 = 0xfe8d, + .pa1b0 = 0xffff, + .pa1b1 = 0xffff, + .pa1b2 = 0xffff, + .gpio0 = 0xff, + .gpio1 = 0xff, + .gpio2 = 0xff, + .gpio3 = 0xff, + .maxpwr_bg = 0x004c, + .itssi_bg = 0x00, + .boardflags_lo = 0x2848, + .boardflags_hi = 0x0000, +}; +#endif + +/* + * return board name for /proc/cpuinfo + */ +const char *board_get_name(void) +{ + return board.name; +} + +/* + * register & return a new board mac address + */ +static int board_get_mac_address(u8 *mac) +{ + u8 *p; + int count; + + if (mac_addr_used >= nvram.mac_addr_count) { + printk(KERN_ERR PFX "not enough mac address\n"); + return -ENODEV; + } + + memcpy(mac, nvram.mac_addr_base, ETH_ALEN); + p = mac + ETH_ALEN - 1; + count = mac_addr_used; + + while (count--) { + do { + (*p)++; + if (*p != 0) + break; + p--; + } while (p != mac); + } + + if (p == mac) { + printk(KERN_ERR PFX "unable to fetch mac address\n"); + return -ENODEV; + } + + mac_addr_used++; + return 0; +} + /* * early init callback, read nvram data from flash and checksum it */ @@ -744,49 +814,6 @@ void __init board_setup(void) panic("unexpected CPU for bcm963xx board"); } -/* - * return board name for /proc/cpuinfo - */ -const char *board_get_name(void) -{ - return board.name; -} - -/* - * register & return a new board mac address - */ -static int board_get_mac_address(u8 *mac) -{ - u8 *p; - int count; - - if (mac_addr_used >= nvram.mac_addr_count) { - printk(KERN_ERR PFX "not enough mac address\n"); - return -ENODEV; - } - - memcpy(mac, nvram.mac_addr_base, ETH_ALEN); - p = mac + ETH_ALEN - 1; - count = mac_addr_used; - - while (count--) { - do { - (*p)++; - if (*p != 0) - break; - p--; - } while (p != mac); - } - - if (p == mac) { - printk(KERN_ERR PFX "unable to fetch mac address\n"); - return -ENODEV; - } - - mac_addr_used++; - return 0; -} - static struct mtd_partition mtd_partitions[] = { { .name = "cfe", @@ -818,33 +845,6 @@ static struct platform_device mtd_dev = { }, }; -/* - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work - */ -#ifdef CONFIG_SSB_PCIHOST -static struct ssb_sprom bcm63xx_sprom = { - .revision = 0x02, - .board_rev = 0x17, - .country_code = 0x0, - .ant_available_bg = 0x3, - .pa0b0 = 0x15ae, - .pa0b1 = 0xfa85, - .pa0b2 = 0xfe8d, - .pa1b0 = 0xffff, - .pa1b1 = 0xffff, - .pa1b2 = 0xffff, - .gpio0 = 0xff, - .gpio1 = 0xff, - .gpio2 = 0xff, - .gpio3 = 0xff, - .maxpwr_bg = 0x004c, - .itssi_bg = 0x00, - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, -}; -#endif - static struct gpio_led_platform_data bcm63xx_led_data; static struct platform_device bcm63xx_gpio_leds = { -- cgit v1.2.3 From 3d45285dd1ff4d4a1361b95e2d6508579a4402b5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 23 Mar 2010 17:56:38 +0100 Subject: MIPS: Sibyte: Fix M3 TLB exception handler workaround. The M3 workaround needs to cmpare the region and VPN2 fields only. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 0de0e4127d66..d1f68aadbc4c 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -788,10 +788,15 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) * create the plain linear handler */ if (bcm1250_m3_war()) { - UASM_i_MFC0(&p, K0, C0_BADVADDR); - UASM_i_MFC0(&p, K1, C0_ENTRYHI); + unsigned int segbits = 44; + + uasm_i_dmfc0(&p, K0, C0_BADVADDR); + uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1); + uasm_i_dsrl32(&p, K1, K0, 62 - 32); + uasm_i_dsrl(&p, K0, K0, 12 + 1); + uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ } @@ -1312,10 +1317,15 @@ static void __cpuinit build_r4000_tlb_load_handler(void) memset(relocs, 0, sizeof(relocs)); if (bcm1250_m3_war()) { - UASM_i_MFC0(&p, K0, C0_BADVADDR); - UASM_i_MFC0(&p, K1, C0_ENTRYHI); + unsigned int segbits = 44; + + uasm_i_dmfc0(&p, K0, C0_BADVADDR); + uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1); + uasm_i_dsrl32(&p, K1, K0, 62 - 32); + uasm_i_dsrl(&p, K0, K0, 12 + 1); + uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ } -- cgit v1.2.3 From 7b3e543ddb39b69b75c9c24bb54180eca152f541 Mon Sep 17 00:00:00 2001 From: Anton Altaparmakov Date: Thu, 25 Mar 2010 20:48:12 +0000 Subject: MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp. 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) break non-GPL modules that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on MIPS. All those functions are EXPORT_SYMBOL() so are meant to be allowed to be used by non-GPL kernel modules. These calls all take page protection as an argument which is normally a constant like PAGE_KERNEL. This commit causes all protection constants like PAGE_KERNEL to not be constants and instead to contain the GPL-only symbol _page_cachable_default. This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL modules to fail to link with the complaint that they are trying to use the GPL-only symbol _page_cachable_default... Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc. Signed-off-by: Anton Altaparmakov Cc: Chris Dearman Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1084/ Signed-off-by: Ralf Baechle --- arch/mips/mm/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index be8627bc5b02..12af739048fa 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -133,7 +133,7 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, } unsigned long _page_cachable_default; -EXPORT_SYMBOL_GPL(_page_cachable_default); +EXPORT_SYMBOL(_page_cachable_default); static inline void setup_protection_map(void) { -- cgit v1.2.3 From 2844e49f5ea1ae75d2026ff128b145e3bd44134c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 3 Apr 2010 10:59:52 +0100 Subject: MIPS: Big Sur: Make defconfig more useful. Signed-off-by: Ralf Baechle --- arch/mips/configs/bigsur_defconfig | 680 ++++++++++++++++++++++++++----------- 1 file changed, 490 insertions(+), 190 deletions(-) diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index c2f06e38c854..0583bb29150f 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 2 17:02:55 2008 +# Linux kernel version: 2.6.34-rc3 +# Sat Apr 3 16:32:11 2010 # CONFIG_MIPS=y @@ -9,20 +9,25 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set @@ -36,10 +41,13 @@ CONFIG_MIPS=y # CONFIG_SIBYTE_SENTOSA is not set CONFIG_SIBYTE_BIGSUR=y # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set CONFIG_SIBYTE_BCM1x80=y CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_1 is not set @@ -48,14 +56,13 @@ CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_4 is not set # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set -# CONFIG_SIMULATION is not set # CONFIG_SB1_CEX_ALWAYS_FATAL is not set # CONFIG_SB1_CERR_STALL is not set -CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -66,15 +73,13 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_BCM1480=y CONFIG_CSRC_BCM1480=y CONFIG_CFE=y CONFIG_DMA_COHERENT=y -CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -88,7 +93,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -101,6 +107,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -108,6 +115,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set CONFIG_CPU_SB1=y +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_SB1=y CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y @@ -123,11 +131,13 @@ CONFIG_64BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_SIBYTE_DMA_PAGEOPS is not set CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -142,18 +152,17 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_4=y CONFIG_NR_CPUS=4 -# CONFIG_MIPS_CMP is not set CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -175,6 +184,7 @@ CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -188,6 +198,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y @@ -195,23 +206,39 @@ CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y @@ -222,29 +249,36 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -252,26 +286,52 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -280,8 +340,9 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y CONFIG_ZONE_DMA32=y # CONFIG_PCCARD is not set @@ -291,6 +352,8 @@ CONFIG_ZONE_DMA32=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y @@ -304,23 +367,20 @@ CONFIG_BINFMT_ELF32=y # CONFIG_PM=y # CONFIG_PM_DEBUG is not set - -# -# Networking -# +# CONFIG_PM_RUNTIME is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -353,36 +413,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -399,11 +429,13 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y # CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -421,19 +453,53 @@ CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m @@ -459,22 +525,44 @@ CONFIG_IP_NF_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP_DCCP is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y +CONFIG_SCTP_HMAC_SHA1=y +# CONFIG_SCTP_HMAC_MD5 is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y # CONFIG_DECNET is not set +CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -482,26 +570,47 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +CONFIG_AX25_DAMA_SLAVE=y +CONFIG_NETROM=m +CONFIG_ROSE=m + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_YAM=m # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set # -# Wireless +# CFG80211 needs to be enabled for MAC80211 # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -513,9 +622,12 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -530,33 +642,53 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +CONFIG_EEPROM_MAX6875=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y -CONFIG_BLK_DEV_IDEFLOPPY=y -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -581,14 +713,13 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -600,14 +731,12 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_BLK_DEV_TC86C001=m -# CONFIG_BLK_DEV_IDE_SWARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -625,10 +754,6 @@ CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -645,27 +770,36 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -676,9 +810,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -700,6 +840,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -715,6 +856,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set @@ -725,14 +867,16 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -745,13 +889,16 @@ CONFIG_PATA_SIL680=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -774,6 +921,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -783,23 +933,33 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -811,29 +971,42 @@ CONFIG_SB1250_MAC=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y +CONFIG_MDIO=m # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=m +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -856,6 +1029,7 @@ CONFIG_SLIP_MODE_SLIP6=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -873,6 +1047,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_LIBPS2 is not set CONFIG_SERIO_RAW=m +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -893,8 +1068,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set # CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set @@ -911,7 +1084,9 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -923,89 +1098,99 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -CONFIG_I2C_SIBYTE=y -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_PLATFORM is not set # -# Miscellaneous I2C Chip support +# I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=y -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -CONFIG_SENSORS_PCF8591=y -CONFIG_EEPROM_MAX6875=y -# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_SIBYTE=y +# CONFIG_I2C_STUB is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y -CONFIG_I2C_DEBUG_CHIP=y # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_LPC_SCH is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1016,10 +1201,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1030,9 +1211,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1040,41 +1230,66 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=m +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_FS_XIP=y +CONFIG_JBD=m +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -1103,15 +1318,13 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1120,9 +1333,12 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1133,16 +1349,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1205,12 +1422,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1219,23 +1442,53 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SB1XXX_CORELIS is not set @@ -1246,20 +1499,50 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_LSM_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1276,7 +1559,7 @@ CONFIG_CRYPTO_SEQIV=m # CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CTR=m -# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m @@ -1287,14 +1570,20 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1325,25 +1614,36 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From d8000beef2cd10c16dc5f66af715f692f5992652 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 3 Apr 2010 17:07:03 +0200 Subject: MIPS: Alchemy: DB1200: Remove custom wait implementation While playing with the out-of-tree MAE driver module, the system would panic after a while in the db1200 custom wait code after wakeup due to a clobbered k0 register being used as target address of a store op. Remove the custom wait implementation and revert back to the Alchemy- recommended implementation already set as default. Signed-off-by: Manuel Lauss To: Linux-MIPS Patchwork: http://patchwork.linux-mips.org/patch/1092/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/devboards/db1200/setup.c | 40 ------------------------------ 1 file changed, 40 deletions(-) diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index 379536e3abd1..be7e92ea01f3 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -60,43 +60,6 @@ void __init board_setup(void) wmb(); } -/* use the hexleds to count the number of times the cpu has entered - * wait, the dots to indicate whether the CPU is currently idle or - * active (dots off = sleeping, dots on = working) for cases where - * the number doesn't change for a long(er) period of time. - */ -static void db1200_wait(void) -{ - __asm__(" .set push \n" - " .set mips3 \n" - " .set noreorder \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " cache 0x14, 64(%0) \n" - /* dots off: we're about to call wait */ - " lui $26, 0xb980 \n" - " ori $27, $0, 3 \n" - " sb $27, 0x18($26) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - /* dots on: there's work to do, increment cntr */ - " lui $26, 0xb980 \n" - " sb $0, 0x18($26) \n" - " lui $26, 0xb9c0 \n" - " lb $27, 0($26) \n" - " addiu $27, $27, 1 \n" - " sb $27, 0($26) \n" - " sync \n" - " .set pop \n" - : : "r" (db1200_wait)); -} - static int __init db1200_arch_init(void) { /* GPIO7 is low-level triggered CPLD cascade */ @@ -110,9 +73,6 @@ static int __init db1200_arch_init(void) irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; - if (cpu_wait) - cpu_wait = db1200_wait; - return 0; } arch_initcall(db1200_arch_init); -- cgit v1.2.3 From f6be75d03c8870be91e6e2a195648ece04b6bb16 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 6 Apr 2010 13:29:50 -0700 Subject: MIPS: Calculate proper ebase value for 64-bit kernels The ebase is relative to CKSEG0 not CAC_BASE. On a 32-bit kernel they are the same thing, for a 64-bit kernel they are not. It happens to kind of work on a 64-bit kernel as they both reference the same physical memory. However since the CPU uses the CKSEG0 base, determining if a J instruction will reach always gives the wrong result unless we use the same number the CPU uses. Signed-off-by: David Daney To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1093/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 4e00f9bc23ee..1a4dd657ccb9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1599,7 +1599,7 @@ void __init trap_init(void) ebase = (unsigned long) __alloc_bootmem(size, 1 << fls(size), 0); } else { - ebase = CAC_BASE; + ebase = CKSEG0; if (cpu_has_mips_r2) ebase += (read_c0_ebase() & 0x3ffff000); } -- cgit v1.2.3