From 3d64de9c50619d32eb71d993d23a50b98d12d3c0 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 18 Dec 2008 19:37:26 +0300 Subject: powerpc: Implement GPIO driver for simple memory-mapped banks The driver supports very simple GPIO controllers, that is, when a controller provides just a 'data' register. Such controllers may be found in various BCSRs (Board's FPGAs used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc). So far we support only 1-byte GPIO banks. Support for other widths may be implemented when/if needed. p.s. To avoid "made up" compatible entries (like compatible = "simple-gpio"), boards must call simple_gpiochip_init() to pass the compatible string. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 11 +++ arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/simple_gpio.c | 155 ++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/simple_gpio.h | 12 +++ 4 files changed, 179 insertions(+) create mode 100644 arch/powerpc/sysdev/simple_gpio.c create mode 100644 arch/powerpc/sysdev/simple_gpio.h diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 47e956c871fe..47fe2bea9865 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -312,4 +312,15 @@ config MPC8xxx_GPIO Say Y here if you're going to use hardware that connects to the MPC831x/834x/837x/8572/8610 GPIOs. +config SIMPLE_GPIO + bool "Support for simple, memory-mapped GPIO controllers" + depends on PPC + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here to support simple, memory-mapped GPIO controllers. + These are usually BCSRs used to control board's switches, LEDs, + chip-selects, Ethernet/USB PHY's power and various other small + on-board peripherals. + endmenu diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 5afce115ab1f..b33b28a6fe12 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o +obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c new file mode 100644 index 000000000000..43c4569e24b7 --- /dev/null +++ b/arch/powerpc/sysdev/simple_gpio.c @@ -0,0 +1,155 @@ +/* + * Simple Memory-Mapped GPIOs + * + * Copyright (c) MontaVista Software, Inc. 2008. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "simple_gpio.h" + +struct u8_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u8 data; +}; + +static struct u8_gpio_chip *to_u8_gpio_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct u8_gpio_chip, mm_gc); +} + +static u8 u8_pin2mask(unsigned int pin) +{ + return 1 << (8 - 1 - pin); +} + +static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return in_8(mm_gc->regs) & u8_pin2mask(gpio); +} + +static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc); + unsigned long flags; + + spin_lock_irqsave(&u8_gc->lock, flags); + + if (val) + u8_gc->data |= u8_pin2mask(gpio); + else + u8_gc->data &= ~u8_pin2mask(gpio); + + out_8(mm_gc->regs, u8_gc->data); + + spin_unlock_irqrestore(&u8_gc->lock, flags); +} + +static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + return 0; +} + +static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + u8_gpio_set(gc, gpio, val); + return 0; +} + +static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc); + + u8_gc->data = in_8(mm_gc->regs); +} + +static int __init u8_simple_gpiochip_add(struct device_node *np) +{ + int ret; + struct u8_gpio_chip *u8_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL); + if (!u8_gc) + return -ENOMEM; + + spin_lock_init(&u8_gc->lock); + + mm_gc = &u8_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = u8_gpio_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 8; + gc->direction_input = u8_gpio_dir_in; + gc->direction_output = u8_gpio_dir_out; + gc->get = u8_gpio_get; + gc->set = u8_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + return 0; +err: + kfree(u8_gc); + return ret; +} + +void __init simple_gpiochip_init(const char *compatible) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, compatible) { + int ret; + struct resource r; + + ret = of_address_to_resource(np, 0, &r); + if (ret) + goto err; + + switch (resource_size(&r)) { + case 1: + ret = u8_simple_gpiochip_add(np); + if (ret) + goto err; + break; + default: + /* + * Whenever you need support for GPIO bank width > 1, + * please just turn u8_ code into huge macros, and + * construct needed uX_ code with it. + */ + ret = -ENOSYS; + goto err; + } + continue; +err: + pr_err("%s: registration failed, status %d\n", + np->full_name, ret); + } +} diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h new file mode 100644 index 000000000000..3a7b0c513c76 --- /dev/null +++ b/arch/powerpc/sysdev/simple_gpio.h @@ -0,0 +1,12 @@ +#ifndef __SYSDEV_SIMPLE_GPIO_H +#define __SYSDEV_SIMPLE_GPIO_H + +#include + +#ifdef CONFIG_SIMPLE_GPIO +extern void simple_gpiochip_init(const char *compatible); +#else +static inline void simple_gpiochip_init(const char *compatible) {} +#endif /* CONFIG_SIMPLE_GPIO */ + +#endif /* __SYSDEV_SIMPLE_GPIO_H */ -- cgit v1.2.3