From 54e19bc74f3380d414681762ceed9f7245bc6a6e Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 28 Sep 2016 11:58:42 -0500 Subject: net: qcom/emac: do not use devm on internal phy pdev The platform_device returned by of_find_device_by_node() is not automatically released when the driver unprobes. Therefore, managed calls like devm_ioremap_resource() should not be used. Instead, we manually allocate the resources and then free them on driver release. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 42 +++++++++++++++++++------ drivers/net/ethernet/qualcomm/emac/emac.c | 4 +++ 2 files changed, 37 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index 6ab0a3c96431..ad0e4209d948 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -681,6 +681,7 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) struct resource *res; const struct of_device_id *match; struct device_node *np; + int ret; np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0); if (!np) { @@ -697,25 +698,48 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev); if (!match) { dev_err(&pdev->dev, "unrecognized internal phy node\n"); - return -ENODEV; + ret = -ENODEV; + goto error_put_device; } phy->initialize = (emac_sgmii_initialize)match->data; /* Base address is the first address */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0); - phy->base = devm_ioremap_resource(&sgmii_pdev->dev, res); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); + phy->base = ioremap(res->start, resource_size(res)); + if (IS_ERR(phy->base)) { + ret = PTR_ERR(phy->base); + goto error_put_device; + } /* v2 SGMII has a per-lane digital digital, so parse it if it exists */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 1); if (res) { - phy->digital = devm_ioremap_resource(&sgmii_pdev->dev, res); - if (IS_ERR(phy->base)) - return PTR_ERR(phy->base); - + phy->digital = ioremap(res->start, resource_size(res)); + if (IS_ERR(phy->digital)) { + ret = PTR_ERR(phy->digital); + goto error_unmap_base; + } } - return phy->initialize(adpt); + ret = phy->initialize(adpt); + if (ret) + goto error; + + /* We've remapped the addresses, so we don't need the device any + * more. of_find_device_by_node() says we should release it. + */ + put_device(&sgmii_pdev->dev); + + return 0; + +error: + if (phy->digital) + iounmap(phy->digital); +error_unmap_base: + iounmap(phy->base); +error_put_device: + put_device(&sgmii_pdev->dev); + + return ret; } diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index e47d38701d6c..429b4cb59ac4 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -723,6 +723,10 @@ static int emac_remove(struct platform_device *pdev) mdiobus_unregister(adpt->mii_bus); free_netdev(netdev); + if (adpt->phy.digital) + iounmap(adpt->phy.digital); + iounmap(adpt->phy.base); + return 0; } -- cgit v1.2.3 From 0de709acbc0d0001dc4b0953aebcfb0f030b9b0e Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 28 Sep 2016 11:58:43 -0500 Subject: net: qcom/emac: use device_get_mac_address Replace the DT-specific of_get_mac_address() function with device_get_mac_address, which works on both DT and ACPI platforms. This change makes it easier to add ACPI support. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 429b4cb59ac4..551df1c52620 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -531,18 +531,16 @@ static void emac_clks_teardown(struct emac_adapter *adpt) static int emac_probe_resources(struct platform_device *pdev, struct emac_adapter *adpt) { - struct device_node *node = pdev->dev.of_node; struct net_device *netdev = adpt->netdev; struct resource *res; - const void *maddr; + char maddr[ETH_ALEN]; int ret = 0; /* get mac address */ - maddr = of_get_mac_address(node); - if (!maddr) - eth_hw_addr_random(netdev); - else + if (device_get_mac_address(&pdev->dev, maddr, ETH_ALEN)) ether_addr_copy(netdev->dev_addr, maddr); + else + eth_hw_addr_random(netdev); /* Core 0 interrupt */ ret = platform_get_irq(pdev, 0); -- cgit v1.2.3 From 5f3d38078c84f7bc12739a3b79fc59797cf0262d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 28 Sep 2016 11:58:44 -0500 Subject: net: qcom/emac: initial ACPI support Add support for reading addresses, interrupts, and _DSD properties from ACPI tables, just like with device tree. The HID for the EMAC device itself is QCOM8070. The internal PHY is represented by a child node with a HID of QCOM8071. The EMAC also has some complex clock initialization requirements that are not represented by this patch. This will be addressed in a future patch. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 37 ++++++++++--- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 72 ++++++++++++++++++------- drivers/net/ethernet/qualcomm/emac/emac.c | 12 +++++ 3 files changed, 95 insertions(+), 26 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c index c412ba9a27e7..da4e90db4d98 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "emac.h" #include "emac-mac.h" #include "emac-phy.h" @@ -167,7 +168,6 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt) { struct device_node *np = pdev->dev.of_node; - struct device_node *phy_np; struct mii_bus *mii_bus; int ret; @@ -183,14 +183,37 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt) mii_bus->parent = &pdev->dev; mii_bus->priv = adpt; - ret = of_mdiobus_register(mii_bus, np); - if (ret) { - dev_err(&pdev->dev, "could not register mdio bus\n"); - return ret; + if (has_acpi_companion(&pdev->dev)) { + u32 phy_addr; + + ret = mdiobus_register(mii_bus); + if (ret) { + dev_err(&pdev->dev, "could not register mdio bus\n"); + return ret; + } + ret = device_property_read_u32(&pdev->dev, "phy-channel", + &phy_addr); + if (ret) + /* If we can't read a valid phy address, then assume + * that there is only one phy on this mdio bus. + */ + adpt->phydev = phy_find_first(mii_bus); + else + adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr); + + } else { + struct device_node *phy_np; + + ret = of_mdiobus_register(mii_bus, np); + if (ret) { + dev_err(&pdev->dev, "could not register mdio bus\n"); + return ret; + } + + phy_np = of_parse_phandle(np, "phy-handle", 0); + adpt->phydev = of_phy_find_device(phy_np); } - phy_np = of_parse_phandle(np, "phy-handle", 0); - adpt->phydev = of_phy_find_device(phy_np); if (!adpt->phydev) { dev_err(&pdev->dev, "could not find external phy\n"); mdiobus_unregister(mii_bus); diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index ad0e4209d948..3d2c05a40d2c 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -14,6 +14,7 @@ */ #include +#include #include #include "emac.h" #include "emac-mac.h" @@ -662,6 +663,24 @@ void emac_sgmii_reset(struct emac_adapter *adpt) clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000); } +static int emac_sgmii_acpi_match(struct device *dev, void *data) +{ + static const struct acpi_device_id match_table[] = { + { + .id = "QCOM8071", + .driver_data = (kernel_ulong_t)emac_sgmii_init_v2, + }, + {} + }; + const struct acpi_device_id *id = acpi_match_device(match_table, dev); + emac_sgmii_initialize *initialize = data; + + if (id) + *initialize = (emac_sgmii_initialize)id->driver_data; + + return !!id; +} + static const struct of_device_id emac_sgmii_dt_match[] = { { .compatible = "qcom,fsm9900-emac-sgmii", @@ -679,30 +698,45 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) struct platform_device *sgmii_pdev = NULL; struct emac_phy *phy = &adpt->phy; struct resource *res; - const struct of_device_id *match; - struct device_node *np; int ret; - np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0); - if (!np) { - dev_err(&pdev->dev, "missing internal-phy property\n"); - return -ENODEV; - } + if (has_acpi_companion(&pdev->dev)) { + struct device *dev; - sgmii_pdev = of_find_device_by_node(np); - if (!sgmii_pdev) { - dev_err(&pdev->dev, "invalid internal-phy property\n"); - return -ENODEV; - } + dev = device_find_child(&pdev->dev, &phy->initialize, + emac_sgmii_acpi_match); - match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev); - if (!match) { - dev_err(&pdev->dev, "unrecognized internal phy node\n"); - ret = -ENODEV; - goto error_put_device; - } + if (!dev) { + dev_err(&pdev->dev, "cannot find internal phy node\n"); + return -ENODEV; + } - phy->initialize = (emac_sgmii_initialize)match->data; + sgmii_pdev = to_platform_device(dev); + } else { + const struct of_device_id *match; + struct device_node *np; + + np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0); + if (!np) { + dev_err(&pdev->dev, "missing internal-phy property\n"); + return -ENODEV; + } + + sgmii_pdev = of_find_device_by_node(np); + if (!sgmii_pdev) { + dev_err(&pdev->dev, "invalid internal-phy property\n"); + return -ENODEV; + } + + match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev); + if (!match) { + dev_err(&pdev->dev, "unrecognized internal phy node\n"); + ret = -ENODEV; + goto error_put_device; + } + + phy->initialize = (emac_sgmii_initialize)match->data; + } /* Base address is the first address */ res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0); diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 551df1c52620..9bf3b2b82e95 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "emac.h" #include "emac-mac.h" #include "emac-phy.h" @@ -575,6 +576,16 @@ static const struct of_device_id emac_dt_match[] = { {} }; +#if IS_ENABLED(CONFIG_ACPI) +static const struct acpi_device_id emac_acpi_match[] = { + { + .id = "QCOM8070", + }, + {} +}; +MODULE_DEVICE_TABLE(acpi, emac_acpi_match); +#endif + static int emac_probe(struct platform_device *pdev) { struct net_device *netdev; @@ -734,6 +745,7 @@ static struct platform_driver emac_platform_driver = { .driver = { .name = "qcom-emac", .of_match_table = emac_dt_match, + .acpi_match_table = ACPI_PTR(emac_acpi_match), }, }; -- cgit v1.2.3