From 7a0b33d4a45d30b9a838fba4efcd80b7b57d4d16 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 19 Sep 2014 10:56:06 -0600 Subject: Revert "PCI: Don't scan random busses in pci_scan_bridge()" This reverts commit fc1b253141b3 ("PCI: Don't scan random busses in pci_scan_bridge()") because it breaks CardBus on some machines. David tested a Dell Latitude D505 that worked like this prior to fc1b253141b3: pci 0000:00:1e.0: PCI bridge to [bus 01] pci 0000:01:01.0: CardBus bridge to [bus 02-05] Note that the 01:01.0 CardBus bridge has a bus number aperture of [bus 02-05], but those buses are all outside the 00:1e.0 PCI bridge bus number aperture, so accesses to buses 02-05 never reach CardBus. This is later patched up by yenta_fixup_parent_bridge(), which changes the subordinate bus number of the 00:1e.0 PCI bridge: pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 With fc1b253141b3, pci_scan_bridge() fails immediately when it notices that we can't allocate a valid secondary bus number for the CardBus bridge, and CardBus doesn't work at all: pci 0000:01:01.0: can't allocate child bus 01 from [bus 01] I'd prefer to fix this by integrating the yenta_fixup_parent_bridge() logic into pci_scan_bridge() so we fix the bus number apertures up front. But I don't think we can do that before v3.17, so I'm going to revert this to avoid the problem while we're working on the long-term fix. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83441 Link: http://lkml.kernel.org/r/1409303414-5196-1-git-send-email-david.henningsson@canonical.com Reported-by: David Henningsson Tested-by: David Henningsson Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v3.15+ --- drivers/pci/probe.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e3cf8a2e6292..7c8ca351beae 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -838,16 +838,12 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) goto out; } - if (max >= bus->busn_res.end) { - dev_warn(&dev->dev, "can't allocate child bus %02x from %pR\n", - max, &bus->busn_res); - goto out; - } - /* Clear errors */ pci_write_config_word(dev, PCI_STATUS, 0xffff); - /* The bus will already exist if we are rescanning */ + /* Prevent assigning a bus number that already exists. + * This can happen when a bridge is hot-plugged, so in + * this case we only re-scan this bus. */ child = pci_find_bus(pci_domain_nr(bus), max+1); if (!child) { child = pci_add_new_bus(bus, dev, max+1); -- cgit v1.2.3 From 12d8706963f073fffad16c7c24160ef20d9aeaff Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 19 Sep 2014 11:08:40 -0600 Subject: Revert "PCI: Make sure bus number resources stay within their parents bounds" This reverts commit 1820ffdccb9b ("PCI: Make sure bus number resources stay within their parents bounds") because it breaks some systems with LSI Logic FC949ES Fibre Channel Adapters, apparently by exposing a defect in those adapters. Dirk tested a Tyan VX50 (B4985) with this device that worked like this prior to 1820ffdccb9b: bus: [bus 00-7f] on node 0 link 1 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) pci 0000:00:0e.0: PCI bridge to [bus 0a] pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07]) pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 (FC adapter) Note that the root bridge [bus 00-07] aperture is wrong; this is a BIOS defect in the PCI0 _CRS method. But prior to 1820ffdccb9b, we didn't enforce that aperture, and the FC adapter worked fine at 0a:00.0. After 1820ffdccb9b, we notice that 00:0e.0's aperture is not contained in the root bridge's aperture, so we reconfigure it so it *is* contained: pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring pci 0000:00:0e.0: PCI bridge to [bus 06-07] This effectively moves the FC device from 0a:00.0 to 07:00.0, which should be legal. But when we enumerate bus 06, the FC device doesn't respond, so we don't find anything. This is probably a defect in the FC device. Possible fixes (due to Yinghai): 1) Add a quirk to fix the _CRS information based on what amd_bus.c read from the hardware 2) Reset the FC device after we change its bus number 3) Revert 1820ffdccb9b Fix 1 would be relatively easy, but it does sweep the LSI FC issue under the rug. We might want to reconfigure bus numbers in the future for some other reason, e.g., hotplug, and then we could trip over this again. For that reason, I like fix 2, but we don't know whether it actually works, and we don't have a patch for it yet. This revert is fix 3, which also sweeps the LSI FC issue under the rug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84281 Reported-by: Dirk Gouders Tested-by: Dirk Gouders Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v3.15+ CC: Yinghai Lu --- drivers/pci/probe.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 7c8ca351beae..4170113cde61 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -775,7 +775,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) /* Check if setup is sensible at all */ if (!pass && (primary != bus->number || secondary <= bus->number || - secondary > subordinate || subordinate > bus->busn_res.end)) { + secondary > subordinate)) { dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n", secondary, subordinate); broken = 1; @@ -849,8 +849,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) child = pci_add_new_bus(bus, dev, max+1); if (!child) goto out; - pci_bus_insert_busn_res(child, max+1, - bus->busn_res.end); + pci_bus_insert_busn_res(child, max+1, 0xff); } max++; buses = (buses & 0xff000000) @@ -909,11 +908,6 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) /* * Set the subordinate bus number to its real value. */ - if (max > bus->busn_res.end) { - dev_warn(&dev->dev, "max busn %02x is outside %pR\n", - max, &bus->busn_res); - max = bus->busn_res.end; - } pci_bus_update_busn_res_end(child, max); pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); } -- cgit v1.2.3 From 7cbeb9f90db8e56856db7568520b735732d34d86 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 22 Sep 2014 20:05:45 -0600 Subject: PCI: pciehp: Fix pcie_wait_cmd() timeout pcie_poll_cmd() take msecs instead of jiffies, so convert timeout to msecs. Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- drivers/pci/hotplug/pciehp_hpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 5e01ae39ec46..2a412fa3b338 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -160,7 +160,7 @@ static void pcie_wait_cmd(struct controller *ctrl) ctrl->slot_ctrl & PCI_EXP_SLTCTL_CCIE) rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); else - rc = pcie_poll_cmd(ctrl, timeout); + rc = pcie_poll_cmd(ctrl, jiffies_to_msecs(timeout)); /* * Controllers with errata like Intel CF118 don't generate -- cgit v1.2.3