From 85e76ab50aecbdc9011806f2f8943450ccb0d93c Mon Sep 17 00:00:00 2001 From: Jovi Zhang Date: Wed, 10 Nov 2010 07:22:18 -0600 Subject: kdb: fix memory leak in kdb_main.c Call kfree in the error path as well as the success path in kdb_ll(). Signed-off-by: Jovi Zhang Signed-off-by: Jason Wessel --- kernel/debug/kdb/kdb_main.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 37755d621924..3ab3feee7840 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -2361,7 +2361,7 @@ static int kdb_pid(int argc, const char **argv) */ static int kdb_ll(int argc, const char **argv) { - int diag; + int diag = 0; unsigned long addr; long offset = 0; unsigned long va; @@ -2400,20 +2400,21 @@ static int kdb_ll(int argc, const char **argv) char buf[80]; if (KDB_FLAG(CMD_INTERRUPT)) - return 0; + goto out; sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va); diag = kdb_parse(buf); if (diag) - return diag; + goto out; addr = va + linkoffset; if (kdb_getword(&va, addr, sizeof(va))) - return 0; + goto out; } - kfree(command); - return 0; +out: + kfree(command); + return diag; } static int kdb_kgdb(int argc, const char **argv) -- cgit v1.2.3 From 5450d904054b4ed582793ad6ecb5469f03cc4c46 Mon Sep 17 00:00:00 2001 From: Jovi Zhang Date: Wed, 10 Nov 2010 07:22:18 -0600 Subject: kdb: fix crash when KDB_BASE_CMD_MAX is exceeded When the number of dyanmic kdb commands exceeds KDB_BASE_CMD_MAX, the kernel will fault. Signed-off-by: Jovi Zhang Signed-off-by: Jason Wessel --- kernel/debug/kdb/kdb_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 3ab3feee7840..a6e729766821 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -82,7 +82,7 @@ static kdbtab_t kdb_base_commands[50]; #define for_each_kdbcmd(cmd, num) \ for ((cmd) = kdb_base_commands, (num) = 0; \ num < kdb_max_commands; \ - num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++) + num++, num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++) typedef struct _kdbmsg { int km_diag; /* kdb diagnostic */ @@ -646,7 +646,7 @@ static int kdb_defcmd2(const char *cmdstr, const char *argv0) } if (!s->usable) return KDB_NOTIMP; - s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB); + s->command = kzalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB); if (!s->command) { kdb_printf("Could not allocate new kdb_defcmd table for %s\n", cmdstr); @@ -2740,13 +2740,13 @@ int kdb_register_repeat(char *cmd, } if (kdb_commands) { memcpy(new, kdb_commands, - kdb_max_commands * sizeof(*new)); + (kdb_max_commands - KDB_BASE_CMD_MAX) * sizeof(*new)); kfree(kdb_commands); } memset(new + kdb_max_commands, 0, kdb_command_extend * sizeof(*new)); kdb_commands = new; - kp = kdb_commands + kdb_max_commands; + kp = kdb_commands + kdb_max_commands - KDB_BASE_CMD_MAX; kdb_max_commands += kdb_command_extend; } -- cgit v1.2.3 From 10a6e67648d4b47769953bd24759ba9609bf00df Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 15 Nov 2010 08:07:35 -0600 Subject: kgdb,x86: fix regression in detach handling The fix from ba773f7c510c0b252145933926c636c439889207 (x86,kgdb: Fix hw breakpoint regression) was not entirely complete. The kgdb_remove_all_hw_break() function also needs to call the hw_break_release_slot() or else a breakpoint can get activated again after the debugger has detached. The kgdb test suite exposes the behavior in the form of either a hang or repetitive failure. The kernel config that exposes the problem contains all of the following: CONFIG_DEBUG_RODATA=y CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100" Reported-by: Frederic Weisbecker Signed-off-by: Jason Wessel Tested-by: Frederic Weisbecker --- arch/x86/kernel/kgdb.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index ec592caac4b4..cd21b654dec6 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -315,14 +315,18 @@ static void kgdb_remove_all_hw_break(void) if (!breakinfo[i].enabled) continue; bp = *per_cpu_ptr(breakinfo[i].pev, cpu); - if (bp->attr.disabled == 1) + if (!bp->attr.disabled) { + arch_uninstall_hw_breakpoint(bp); + bp->attr.disabled = 1; continue; + } if (dbg_is_early) early_dr7 &= ~encode_dr7(i, breakinfo[i].len, breakinfo[i].type); - else - arch_uninstall_hw_breakpoint(bp); - bp->attr.disabled = 1; + else if (hw_break_release_slot(i)) + printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n", + breakinfo[i].addr); + breakinfo[i].enabled = 0; } } -- cgit v1.2.3 From e3839ed8e89e79202c0402ac46965c0686897890 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Tue, 16 Nov 2010 16:02:00 -0600 Subject: kgdb,ppc: Fix regression in evr register handling Commit ff10b88b5a05c8f1646dd15fb9f6093c1384ff6d (kgdb,ppc: Individual register get/set for ppc) introduced a problem where memcpy was used incorrectly to read and write the evr registers with a kernel that has: CONFIG_FSL_BOOKE=y CONFIG_SPE=y CONFIG_KGDB=y This patch also fixes the following compilation problems: arch/powerpc/kernel/kgdb.c: In function 'dbg_get_reg': arch/powerpc/kernel/kgdb.c:341: error: passing argument 2 of 'memcpy' makes pointer from integer without a cast arch/powerpc/kernel/kgdb.c: In function 'dbg_set_reg': arch/powerpc/kernel/kgdb.c:366: error: passing argument 1 of 'memcpy' makes pointer from integer without a cast [jason.wessel@windriver.com: Remove void * casts and fix patch header] Reported-by: Milton Miller Signed-off-by: Dongdong Deng Acked-by: Kumar Gala Signed-off-by: Jason Wessel CC: linuxppc-dev@lists.ozlabs.org --- arch/powerpc/kernel/kgdb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 7a9db64f3f04..42850ee00ada 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -337,7 +337,7 @@ char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) /* FP registers 32 -> 63 */ #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE) if (current) - memcpy(mem, current->thread.evr[regno-32], + memcpy(mem, ¤t->thread.evr[regno-32], dbg_reg_def[regno].size); #else /* fp registers not used by kernel, leave zero */ @@ -362,7 +362,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) if (regno >= 32 && regno < 64) { /* FP registers 32 -> 63 */ #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE) - memcpy(current->thread.evr[regno-32], mem, + memcpy(¤t->thread.evr[regno-32], mem, dbg_reg_def[regno].size); #else /* fp registers not used by kernel, leave zero */ -- cgit v1.2.3