From ece9528e5f88cee11303fceefe39382f1030cd4e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 12 Jul 2011 08:18:15 -0700 Subject: gpio/omap: replace MOD_REG_BIT macro with static inline This macro is ugly and confusing, especially since it passes in most arguments, but uses an implied 'base' from the caller. Replace it with an equivalent static inline. Signed-off-by: Kevin Hilman --- drivers/gpio/gpio-omap.c | 54 ++++++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0599854e2217..34a7110d9bc8 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -148,13 +148,17 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; } -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) +static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) +{ + int l = __raw_readl(base + reg); + + if (set) + l |= mask; + else + l &= ~mask; + + __raw_writel(l, base + reg); +} /** * _set_gpio_debounce - low level gpio debounce time @@ -210,28 +214,28 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit, - trigger != 0); + _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, + trigger != 0); } else { /* * GPIO wakeup request can only be generated on edge -- cgit v1.2.3 From 832337490f22987a1b739ba840e105c0c9af01bc Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Mon, 18 Jul 2011 07:43:14 -0700 Subject: gpio/omap: check return value from irq_alloc_generic_chip Ensure return value of irq_alloc_generic_chip() is checked before continuing on to use it. Signed-off-by: Todd Poynor Signed-off-by: Kevin Hilman --- drivers/gpio/gpio-omap.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 34a7110d9bc8..f0208a958185 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1090,6 +1090,11 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base, handle_simple_irq); + if (!gc) { + dev_err(bank->dev, "Memory alloc failed for gc\n"); + return; + } + ct = gc->chip_types; /* NOTE: No ack required, reading IRQ status clears it. */ -- cgit v1.2.3 From a78f6787a3dd7223bf185895fdcea661b408dc0a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:18:08 +0000 Subject: DocBook/drm: Eradicate inappropriate uses of the future tense Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c27915893974..0527ff2be37e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -57,10 +57,10 @@ existing drivers. - First, we'll go over some typical driver initialization + First, we go over some typical driver initialization requirements, like setting up command buffers, creating an initial output configuration, and initializing core services. - Subsequent sections will cover core internals in more detail, + Subsequent sections cover core internals in more detail, providing implementation notes and examples. @@ -74,7 +74,7 @@ The core of every DRM driver is struct drm_driver. Drivers - will typically statically initialize a drm_driver structure, + typically statically initialize a drm_driver structure, then pass it to drm_init() at load time. @@ -155,7 +155,7 @@ In the example above, taken from the i915 DRM driver, the driver sets several flags indicating what core features it supports. - We'll go over the individual callbacks in later sections. Since + We go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as we'll see, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -315,7 +315,7 @@ Configuring the device - Obviously, device configuration will be device specific. + Obviously, device configuration is device specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -326,7 +326,7 @@ drm_get_resource_len() can be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you'll probably want a + mapping for the BAR in question. Note you probably want a drm_local_map_t in your driver private structure to track any mappings you create. @@ -357,7 +357,7 @@ - Once your interrupt handler is registered (it'll use your + Once your interrupt handler is registered (it uses your drm_driver.irq_handler as the actual interrupt handling function), you can safely enable interrupts on your device, assuming any other state your interrupt handler uses is also @@ -389,7 +389,7 @@ should support a memory manager. - If your driver supports memory management (it should!), you'll + If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize it depends on which memory manager you're using, TTM or GEM. @@ -430,13 +430,13 @@ have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and release hooks should point at your driver specific init and - release routines, which will probably eventually call + release routines, which probably eventually call ttm_mem_global_init and ttm_mem_global_release respectively. Once your global TTM accounting structure is set up and initialized (done by calling ttm_global_item_ref on the global object you - just created), you'll need to create a buffer object TTM to + just created), you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, @@ -455,8 +455,8 @@ than TTM, but has no VRAM management capability. Core GEM initialization is comprised of a basic drm_mm_init call to create a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver will - need to allocate and initialize a command ring buffer following + object allocation. In a KMS configuration, the driver + needs to allocate and initialize a command ring buffer following basic GEM initialization. Most UMA devices have a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the @@ -464,16 +464,16 @@ be initialized separately into its own DRM MM object. - Initialization will be driver specific, and will depend on + Initialization is driver specific, and depends on the architecture of the device. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM will manage + (i.e. it doesn't have dedicated VRAM), GEM manages making regular RAM available for GPU operations. Memory set aside by the BIOS (called "stolen" memory by the i915 - driver) will be managed by the DRM memrange allocator; the - rest of the aperture will be managed by GEM. + driver) is managed by the DRM memrange allocator; the + rest of the aperture is managed by GEM. /* Basic memrange allocator for stolen space (aka vram) */ drm_memrange_init(&dev_priv->vram, 0, prealloc_size); @@ -616,7 +616,7 @@ void intel_crt_init(struct drm_device *dev) DRM_IOCTL_MODESET_CTL should be called by application level drivers before and after mode setting, since on many devices the - vertical blank counter will be reset at that time. Internally, + vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the _DRM_PRE_MODESET command so that the counter won't go backwards (which is dealt with when _DRM_POST_MODESET is used). @@ -632,8 +632,8 @@ void intel_crt_init(struct drm_device *dev) register. The enable and disable vblank callbacks should enable and disable vertical blank interrupts, respectively. In the absence of DRM clients waiting on vblank events, the core DRM - code will use the disable_vblank() function to disable - interrupts, which saves power. They'll be re-enabled again when + code uses the disable_vblank() function to disable + interrupts, which saves power. They are re-enabled again when a client calls the vblank wait ioctl above. @@ -699,14 +699,14 @@ void intel_crt_init(struct drm_device *dev) performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, i.e. an active render target; in that case the set domain function - will block the client and wait for rendering to complete before + blocks the client and waits for rendering to complete before performing any necessary flushing operations). Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM will take care to bind + and submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding @@ -767,7 +767,7 @@ void intel_crt_init(struct drm_device *dev) In order to set a mode on a given CRTC, encoder and connector configuration, clients need to provide a framebuffer object which - will provide a source of pixels for the CRTC to deliver to the encoder(s) + provides a source of pixels for the CRTC to deliver to the encoder(s) and ultimately the connector(s) in the configuration. A framebuffer is fundamentally a driver specific memory object, made into an opaque handle by the DRM addfb function. Once an fb has been created this @@ -789,7 +789,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core provides some suspend/resume code, but drivers wanting full suspend/resume support should provide save() and - restore() functions. These will be called at suspend, + restore() functions. These are called at suspend, hibernate, or resume time, and should perform any state save or restore required by your device across suspend or hibernate states. @@ -823,7 +823,7 @@ void intel_crt_init(struct drm_device *dev) Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages will cover the rest. + level info, since man pages should cover the rest. -- cgit v1.2.3 From f11aca045c165b9d4c9c4fce29f51ec24bcf64d3 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:21:31 +0000 Subject: DocBook/drm: can -> may Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0527ff2be37e..b9079386040d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -32,7 +32,7 @@ The Linux DRM layer contains code intended to support the needs of complex graphics devices, usually containing programmable pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel can make use of DRM functions to make + drivers in the kernel may make use of DRM functions to make tasks like memory management, interrupt handling and DMA easier, and provide a uniform interface to applications. @@ -293,12 +293,12 @@ can be used for tracking various device specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a - driver can simply allocate one and set drm_device.dev_priv + driver may simply allocate one and set drm_device.dev_priv appropriately; at unload the driver can free it and set drm_device.dev_priv to NULL. - The DRM supports several counters which can be used for rough + The DRM supports several counters which may be used for rough performance characterization. Note that the DRM stat counter system is not often used by applications, and supporting additional counters is completely optional. @@ -323,7 +323,7 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() can be used to find BARs on the given + drm_get_resource_len() may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new mapping for the BAR in question. Note you probably want a @@ -335,12 +335,12 @@ if compatibility with other operating systems isn't a concern (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls can be used for the above, e.g. pci_resource_* + native Linux calls may be used for the above, e.g. pci_resource_* and iomap*/iounmap. See the Linux device driver book for more info. - Once you have a register map, you can use the DRM_READn() and + Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or use driver specific versions to offset into your MMIO space relative to a driver specific base pointer (see I915_READ for @@ -440,7 +440,7 @@ provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions can be provided, + driver specific init and release functions may be provided, likely eventually calling ttm_bo_global_init and ttm_bo_global_release, respectively. Also like the previous object, ttm_global_item_ref is used to create an initial reference @@ -483,7 +483,7 @@ - Once the memory manager has been set up, we can allocate the + Once the memory manager has been set up, we may allocate the command buffer. In the i915 case, this is also done with a GEM function, i915_gem_init_ringbuffer(). @@ -572,7 +572,7 @@ void intel_crt_init(struct drm_device *dev) devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing - finer grained management can opt to use the core callbacks + finer grained management may opt to use the core callbacks directly. @@ -637,7 +637,7 @@ void intel_crt_init(struct drm_device *dev) a client calls the vblank wait ioctl above. - Devices that don't provide a count register can simply use an + Devices that don't provide a count register may simply use an internal atomic counter incremented on every vertical blank interrupt, and can make their enable and disable vblank functions into no-ops. -- cgit v1.2.3 From 0c54781bc5aaec1e23bc50a4ef757b8e8bfc693b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 17:55:54 +0000 Subject: DocBook/drm: Clean up code comment Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b9079386040d..4ddc99928668 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -88,8 +88,8 @@ static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ce045a8cf82c..acf4ea84c801 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -785,8 +785,8 @@ static struct vm_operations_struct i915_gem_vm_ops = { }; static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ -- cgit v1.2.3 From 2c267e9e016da3e19a95261875a5f3b19dd6e9f6 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:10:12 +0000 Subject: DocBook/drm: Use a semicolon Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 4ddc99928668..aa13e0883510 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -154,8 +154,8 @@ In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports. - We go over the individual callbacks in later sections. Since + sets several flags indicating what core features it supports; + we go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -647,8 +647,8 @@ void intel_crt_init(struct drm_device *dev) Memory management - The memory manager lies at the heart of many DRM operations, and - is also required to support advanced client features like OpenGL + The memory manager lies at the heart of many DRM operations; it + is required to support advanced client features like OpenGL pbuffers. The DRM currently contains two memory managers, TTM and GEM. -- cgit v1.2.3 From 02391f1fe7b4e5434e4c558dcae99b9368c84bf3 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:20:54 +0000 Subject: DocBook/drm: a -> an Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index aa13e0883510..5b815b83c30b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -203,7 +203,7 @@ DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - DRIVER_HAVE_IRQ indicates whether the driver has a IRQ + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler, DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). -- cgit v1.2.3 From b1f95bdc1eb10e3d3c8a85b2f0bc08fa6c08ae5d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:21:29 +0000 Subject: DocBook/drm: , -> . Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 5b815b83c30b..a0f0f984f04f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -204,7 +204,7 @@ DRIVER_HAVE_IRQ indicates whether the driver has an IRQ - handler, DRIVER_IRQ_SHARED indicates whether the device & + handler. DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). -- cgit v1.2.3 From 80c84e6f3c2c707ccb5d7b500e25bda69f0e1895 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:23:21 +0000 Subject: DocBook/drm: Move `should be set' to the beginning of the sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a0f0f984f04f..42368f4f7bab 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -214,8 +214,8 @@ DRIVER_DMA_QUEUE - If the driver queues DMA requests and completes them - asynchronously, this flag should be set. Deprecated. + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. -- cgit v1.2.3 From 58f1d652def02db0bdcdf03d01f3483fc18ec392 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:31:42 +0000 Subject: DocBook/drm: Clean up `pre-memory management aware' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 42368f4f7bab..e9242c09ac54 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -273,7 +273,7 @@ conflict with DRM client requirements. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. - Likewise, if pre-memory management aware user level drivers are + Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to be omitted. These requirements are driver specific, and care needs to be taken to keep both old and new applications and -- cgit v1.2.3 From 75aa9df5a2bf2ae90a1f0f6f283278f634ca4233 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:34:49 +0000 Subject: DocBook/drm: Rearrange wording to make more sense Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index e9242c09ac54..eb28cc02d41b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -281,9 +281,9 @@ module parameter to control whether advanced features are enabled at load time or in legacy fashion. If compatibility is a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent incompatible - device initialization and control with the currently active - userspace drivers. + from the old ones), care must be taken to prevent device + initialization and control that is incompatible with + currently active userspace drivers. -- cgit v1.2.3 From 6e375f44b6073dd320895753ff05cbfd3f410f66 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:37:05 +0000 Subject: DocBook/drm: Replace the paragraph's first sentence with its last sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index eb28cc02d41b..9eda9b6df51d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -269,8 +269,10 @@ initial output configuration. - Note that the tasks performed at driver load time must not - conflict with DRM client requirements. For instance, if user + If compatibility is a concern (e.g. with drivers converted over + to the new interfaces from the old ones), care must be taken to + prevent device initialization and control that is incompatible with + currently active userspace drivers. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. Likewise, if user-level drivers unaware of memory management are @@ -279,11 +281,7 @@ needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are - enabled at load time or in legacy fashion. If compatibility is - a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent device - initialization and control that is incompatible with - currently active userspace drivers. + enabled at load time or in legacy fashion. -- cgit v1.2.3 From 06fa7b8066d4dc3f6c9d4c4bf34f385d5a823f13 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:40:55 +0000 Subject: DocBook/drm: Better wording Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9eda9b6df51d..b4196c1a239d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -292,8 +292,8 @@ information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a driver may simply allocate one and set drm_device.dev_priv - appropriately; at unload the driver can free it and set - drm_device.dev_priv to NULL. + appropriately; it should be freed and drm_device.dev_priv set + to NULL when the driver is unloaded. The DRM supports several counters which may be used for rough -- cgit v1.2.3 From 57a15fd663d6680dc100a537f0ed328993c33af2 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:42:36 +0000 Subject: DocBook/drm: Clearer wording with `for consumption by' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4196c1a239d..33290e3e3ffa 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -305,8 +305,8 @@ These interfaces are deprecated and should not be used. If performance monitoring is desired, the developer should investigate and potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information to performance monitoring - tools and applications. + GPU related performance information for consumption by performance + monitoring tools and applications. -- cgit v1.2.3 From 8814630f0b59421e558f4403b79f5dc3a025a386 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:46:10 +0000 Subject: DocBook/drm: Insert missing `that' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 33290e3e3ffa..25e0f460a973 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -321,10 +321,10 @@ Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() may be used to find BARs on the given + drm_get_resource_len(), may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you probably want a + mapping for the BAR in question. Note that you probably want a drm_local_map_t in your driver private structure to track any mappings you create. -- cgit v1.2.3 From f07faf693c59b449b6637ea056e5826c85dcd265 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:48:15 +0000 Subject: DocBook/drm: Insert missing `an' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 25e0f460a973..1b2e3c37e377 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -342,7 +342,7 @@ DRM_WRITEn() macros to access the registers on your device, or use driver specific versions to offset into your MMIO space relative to a driver specific base pointer (see I915_READ for - example). + an example). If your device supports interrupt generation, you may want to -- cgit v1.2.3 From 5b658bf2bf9e47f9a67cd26b1c69e4441eaf04fc Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:49:11 +0000 Subject: DocBook/drm: `setup' is the noun; `to set up' is the verb Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 1b2e3c37e377..d2f1ddaa3ca0 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -346,7 +346,7 @@ If your device supports interrupt generation, you may want to - setup an interrupt handler at driver load time as well. This + set up an interrupt handler at driver load time as well. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before -- cgit v1.2.3 From bb49a6a1f3303f9cf23a19f403c9b90cdff0e7da Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:50:14 +0000 Subject: DocBook/drm: `at driver load time' -> `when the driver is loaded' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d2f1ddaa3ca0..7001937f6b7d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -346,7 +346,7 @@ If your device supports interrupt generation, you may want to - set up an interrupt handler at driver load time as well. This + set up an interrupt handler when the driver is loaded. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before -- cgit v1.2.3 From 9c2416adac986d7d90814d7985a0ea80ebea416f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:56:12 +0000 Subject: DocBook/drm: Use the passive voice Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7001937f6b7d..03321ebaf4a7 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -369,9 +369,9 @@ using the pci_map_rom() call, a convenience function that takes care of mapping the actual ROM, whether it has been shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that once you've - mapped the ROM and extracted any necessary information, be - sure to unmap it; on many devices the ROM address decoder is + on the PCI device in the ROM BAR. Note that after the ROM + has been mapped and any necessary information has been extracted, + it should be unmapped; on many devices the ROM address decoder is shared with other BARs, so leaving it mapped can cause undesired behavior like hangs or memory corruption. -- cgit v1.2.3 From 118bdd70bdd73b08dcc3920fa30a21be5bbbffae Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:57:04 +0000 Subject: DocBook/drm: Offset modifiers with commas Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 03321ebaf4a7..ce145babef6e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -371,7 +371,7 @@ shadowed into memory (typically at address 0xc0000) or exists on the PCI device in the ROM BAR. Note that after the ROM has been mapped and any necessary information has been extracted, - it should be unmapped; on many devices the ROM address decoder is + it should be unmapped; on many devices, the ROM address decoder is shared with other BARs, so leaving it mapped can cause undesired behavior like hangs or memory corruption. @@ -440,7 +440,7 @@ and its size should be sizeof(struct ttm_bo_global). Again, driver specific init and release functions may be provided, likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also like the previous + ttm_bo_global_release, respectively. Also, like the previous object, ttm_global_item_ref is used to create an initial reference count for the TTM, which will call your initialization function. @@ -613,7 +613,7 @@ void intel_crt_init(struct drm_device *dev) DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices the + drivers before and after mode setting, since on many devices, the vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the _DRM_PRE_MODESET command so that the counter won't go @@ -696,7 +696,7 @@ void intel_crt_init(struct drm_device *dev) set domain function, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case the set domain function + i.e. an active render target; in that case, the set domain function blocks the client and waits for rendering to complete before performing any necessary flushing operations). -- cgit v1.2.3 From 8d36ffae67d89a86e37e7745503743fec1ac695c Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:57:37 +0000 Subject: DocBook/drm: can -> could Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ce145babef6e..60ddf4be11c7 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -372,7 +372,7 @@ on the PCI device in the ROM BAR. Note that after the ROM has been mapped and any necessary information has been extracted, it should be unmapped; on many devices, the ROM address decoder is - shared with other BARs, so leaving it mapped can cause + shared with other BARs, so leaving it mapped could cause undesired behavior like hangs or memory corruption. -- cgit v1.2.3 From eb2b8d4273fb8b73821ca8dbc9c0de10e9879833 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 18:58:42 +0000 Subject: DocBook/drm: , -> : Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 60ddf4be11c7..953c4cb726bb 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -389,7 +389,7 @@ If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize - it depends on which memory manager you're using, TTM or GEM. + it depends on which memory manager you're using: TTM or GEM. TTM initialization @@ -647,7 +647,7 @@ void intel_crt_init(struct drm_device *dev) The memory manager lies at the heart of many DRM operations; it is required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers, TTM + pbuffers. The DRM currently contains two memory managers: TTM and GEM. -- cgit v1.2.3 From 005d7f4a01d3c755c3abab38b7e380f0bbff475d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:02:52 +0000 Subject: DocBook/drm: Insert missing comma Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 953c4cb726bb..230c738c22f0 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -429,7 +429,7 @@ object should be sizeof(struct ttm_mem_global), and the init and release hooks should point at your driver specific init and release routines, which probably eventually call - ttm_mem_global_init and ttm_mem_global_release respectively. + ttm_mem_global_init and ttm_mem_global_release, respectively. Once your global TTM accounting structure is set up and initialized @@ -499,8 +499,8 @@ Output discovery and initialization - Several core functions exist to create CRTCs, encoders and - connectors, namely drm_crtc_init(), drm_connector_init() and + Several core functions exist to create CRTCs, encoders, and + connectors, namely drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. @@ -578,7 +578,7 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC and connector, several functions must + For each encoder, CRTC, and connector, several functions must be provided, depending on the object type. Encoder objects need to provide a DPMS (basically on/off) function, mode fixup (for converting requested modes into native hardware timings), @@ -727,7 +727,7 @@ void intel_crt_init(struct drm_device *dev) Output management At the core of the DRM output management code is a set of - structures representing CRTCs, encoders and connectors. + structures representing CRTCs, encoders, and connectors. A CRTC is an abstraction representing a part of the chip that -- cgit v1.2.3 From 1c86de2216f678bfb6e2472af6e5c25b0df8d91f Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:14:26 +0000 Subject: DocBook/drm: Remove parentheses and unnecessary repetition Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 230c738c22f0..6b2a80369f6b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -433,8 +433,8 @@ Once your global TTM accounting structure is set up and initialized - (done by calling ttm_global_item_ref on the global object you - just created), you need to create a buffer object TTM to + by calling ttm_global_item_ref on it, + you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, -- cgit v1.2.3 From ae63d793a43888eeb1c16422252d987aa37ab96c Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:19:18 +0000 Subject: DocBook/drm: Insert `()' after function name Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 6b2a80369f6b..6977cd91779c 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -433,15 +433,15 @@ Once your global TTM accounting structure is set up and initialized - by calling ttm_global_item_ref on it, + by calling ttm_global_item_ref() on it, you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, driver specific init and release functions may be provided, - likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also, like the previous - object, ttm_global_item_ref is used to create an initial reference + likely eventually calling ttm_bo_global_init() and + ttm_bo_global_release(), respectively. Also, like the previous + object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. -- cgit v1.2.3 From 049cc903e714a27805eae0c34a4c34902a385032 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:21:17 +0000 Subject: DocBook/drm: Streamline wording of GEM initialization Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 6977cd91779c..7c11d790f749 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -451,7 +451,7 @@ GEM is an alternative to TTM, designed specifically for UMA devices. It has simpler initialization and execution requirements than TTM, but has no VRAM management capability. Core GEM - initialization is comprised of a basic drm_mm_init call to create + is initialized by calling drm_mm_init() to create a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following -- cgit v1.2.3 From 482b2ad8e488e609bb3bb408a8e9ca17b73b17c6 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:37:24 +0000 Subject: DocBook/drm: basic -> core Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7c11d790f749..d385e902f5ff 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - basic GEM initialization. Most UMA devices have a so-called + core GEM initialization. Most UMA devices have a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must -- cgit v1.2.3 From 54f2cb8fc930e08fd6156519b28c45d576615f82 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:41:37 +0000 Subject: DocBook/drm: Use a singular subject for grammatical cleanliness Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d385e902f5ff..3470c6b2f843 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - core GEM initialization. Most UMA devices have a so-called + core GEM initialization. A UMA device usually has a so-called "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must @@ -635,10 +635,10 @@ void intel_crt_init(struct drm_device *dev) a client calls the vblank wait ioctl above. - Devices that don't provide a count register may simply use an + A device that doesn't provide a count register may simply use an internal atomic counter incremented on every vertical blank - interrupt, and can make their enable and disable vblank - functions into no-ops. + interrupt (and then treat the enable_vblank() and disable_vblank() + callbacks as no-ops). -- cgit v1.2.3 From 9029bd7a42e3c32783866630ee3eb6b82e273544 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:42:20 +0000 Subject: DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes From Webster's Revised Unabridged Dictionary (1913) [web1913]: So-called \So"-called`\, a. So named; called by such a name (but perhaps called thus with doubtful propriety). From WordNet (r) 2.0 [wn]: so-called adj : doubtful or suspect; "these so-called experts are no help" [syn: {alleged(a)}, {supposed}] My strong conviction is that widespread use of 'so gennant' or 'sogennant' in German has led to the creeping misuse of 'so-called' in English (especially through technical writings). In English, it would be better to use: what is called or a better translation of 'so gennant': so named Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 3470c6b2f843..66a114a05c6f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -455,7 +455,7 @@ a GTT DRM MM object, which provides an address space pool for object allocation. In a KMS configuration, the driver needs to allocate and initialize a command ring buffer following - core GEM initialization. A UMA device usually has a so-called + core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the device. This space is not typically managed by GEM, and must -- cgit v1.2.3 From 1dbd39c3ea3967c41a09e81c826499f7ae9c8180 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:48:32 +0000 Subject: DocBook/drm: Insert `it' for smooth reading Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 66a114a05c6f..15541b1fc052 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -458,7 +458,7 @@ core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and must + device. This space is not typically managed by GEM, and it must be initialized separately into its own DRM MM object. -- cgit v1.2.3 From 3bf7df615612671271512aada7d83285f3fa731b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 19:49:10 +0000 Subject: DocBook/drm: Remove redundancy Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 15541b1fc052..c24f50ce7862 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -462,8 +462,7 @@ be initialized separately into its own DRM MM object. - Initialization is driver specific, and depends on - the architecture of the device. In the case of Intel + Initialization is driver specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device -- cgit v1.2.3 From 327d6fb962f227a31d4b03869774287efca49c50 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:18:14 +0000 Subject: DocBook/drm: Clarify `final initialization' via better formatting Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c24f50ce7862..1bbeea72a01f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -490,10 +490,19 @@ Output configuration - The final initialization task is output configuration. This involves - finding and initializing the CRTCs, encoders and connectors - for your device, creating an initial configuration and - registering a framebuffer console driver. + The final initialization task is output configuration. This involves: + + + Finding and initializing the CRTCs, encoders, and connectors + for the device. + + + Creating an initial configuration. + + + Registering a framebuffer console driver. + + Output discovery and initialization -- cgit v1.2.3 From 8a9ba910ac3962e5adb4ce1f086adf1e21fa04d1 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:21:22 +0000 Subject: DocBook/drm: Use a colon Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 1bbeea72a01f..790e634e5635 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -508,7 +508,7 @@ Output discovery and initialization Several core functions exist to create CRTCs, encoders, and - connectors, namely drm_crtc_init(), drm_connector_init(), and + connectors, namely: drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. -- cgit v1.2.3 From 896ee65fb646f9a98243a9f69e5904dff394c78a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:26:17 +0000 Subject: DocBook/drm: Remove extraneous commas Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 790e634e5635..d2aee84f18af 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -562,9 +562,9 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a CRT connector and encoder combination is created. A device - specific i2c bus is also created, for fetching EDID data and + specific i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, - the new connector is registered with sysfs, to make its + the new connector is registered with sysfs to make its properties available to applications. -- cgit v1.2.3 From 4dc0152d5780f04573046b06a3fb7c7ad9b81afa Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:29:32 +0000 Subject: DocBook/drm: Insert `the' for readability, and change `set' to `setting' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d2aee84f18af..09e02f7c668c 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -573,8 +573,8 @@ void intel_crt_init(struct drm_device *dev) Since many PC-class graphics devices have similar display output designs, the DRM provides a set of helper functions to make output management easier. The core helper routines handle - encoder re-routing and disabling of unused functions following - mode set. Using the helpers is optional, but recommended for + encoder re-routing and the disabling of unused functions following + mode setting. Using the helpers is optional, but recommended for devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing -- cgit v1.2.3 From 65ffef508f23d5e67940cadc8eca2ae34738018a Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 20:55:58 +0000 Subject: DocBook/drm: Use an itemizedlist for what an encoder needs to provide Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 09e02f7c668c..da011f2af9cb 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -586,17 +586,25 @@ void intel_crt_init(struct drm_device *dev) - For each encoder, CRTC, and connector, several functions must - be provided, depending on the object type. Encoder objects - need to provide a DPMS (basically on/off) function, mode fixup - (for converting requested modes into native hardware timings), - and prepare, set and commit functions for use by the core DRM - helper functions. Connector helpers need to provide mode fetch and - validity functions as well as an encoder matching function for - returning an ideal encoder for a given connector. The core - connector functions include a DPMS callback, (deprecated) - save/restore routines, detection, mode probing, property handling, - and cleanup functions. + Each encoder object needs to provide: + + + A DPMS (basically on/off) function. + + + A mode-fixup function (for converting requested modes into + native hardware timings). + + + Functions (prepare, set, and commit) for use by the core DRM + helper functions. + + + Connector helpers need to provide functions (mode-fetch, validity, + and encoder-matching) for returning an ideal encoder for a given + connector. The core connector functions include a DPMS callback, + save/restore routines (deprecated), detection, mode probing, + property handling, and cleanup functions. -- cgit v1.2.3 From 51b9500de28a1e5e7a2090de5d345d6d98581617 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 21:11:30 +0000 Subject: DocBook/drm: Use a for vblank ioctls Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 39 +++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 14 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index da011f2af9cb..457d56a1a966 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -619,22 +619,33 @@ void intel_crt_init(struct drm_device *dev) VBlank event handling The DRM core exposes two vertical blank related ioctls: - DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL. + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + - - DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure - as its argument, and is used to block or request a signal when a - specified vblank event occurs. - - - DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices, the - vertical blank counter is reset at that time. Internally, - the DRM snapshots the last vblank count when the ioctl is called - with the _DRM_PRE_MODESET command so that the counter won't go - backwards (which is dealt with when _DRM_POST_MODESET is used). - To support the functions above, the DRM core provides several helper functions for tracking vertical blank counters, and -- cgit v1.2.3 From f877bd4ad5508e2f0653c31d05ffe0ad4e2bfe11 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Thu, 25 Aug 2011 21:16:15 +0000 Subject: DocBook/drm: Insert a comma Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 457d56a1a966..0387970234b3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -638,7 +638,7 @@ void intel_crt_init(struct drm_device *dev) after mode setting, since on many devices the vertical blank counter is reset at that time. Internally, the DRM snapshots the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command so that the counter won't go backwards + _DRM_PRE_MODESET command, so that the counter won't go backwards (which is dealt with when _DRM_POST_MODESET is used). -- cgit v1.2.3 From 0c2d91a80a156208d2f9f3dfb01871ebcf4a9338 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 15:59:56 +0000 Subject: DocBook/drm: Use an for fundamental GEM operations Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0387970234b3..c358367f9f85 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -709,9 +709,13 @@ void intel_crt_init(struct drm_device *dev) read & write, mapping, and domain ownership transfers. - On a fundamental level, GEM involves several operations: memory - allocation and freeing, command execution, and aperture management - at command execution time. Buffer object allocation is relatively + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely provided by Linux's shmem layer, which provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are -- cgit v1.2.3 From 2d43f5d667273ba4975cb79782a46aa374dd8607 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 16:00:55 +0000 Subject: DocBook/drm: Improve flow of GPU/CPU coherence sentence Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c358367f9f85..ba20f9fbb62b 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -720,8 +720,9 @@ void intel_crt_init(struct drm_device *dev) provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, when the GPU finishes rendering to an object, - if the CPU accesses it, it must be made coherent with the CPU's view + with the GPU. Likewise, if the CPU accesses an object after the GPU + has finished rendering to the object, then the object must be made + coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. This core CPU<->GPU coherency management is provided by the GEM set domain function, which evaluates an object's current domain and -- cgit v1.2.3 From b8c6e0fe46fcd60f58089365dd96dcf04f95263b Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:34:00 +0000 Subject: DocBook/drm: Refer to the domain-setting function as a device-specific ioctl Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ba20f9fbb62b..9ae328aa1dd3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -724,11 +724,11 @@ void intel_crt_init(struct drm_device *dev) has finished rendering to the object, then the object must be made coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by the GEM - set domain function, which evaluates an object's current domain and + This core CPU<->GPU coherency management is provided by a + device-specific ioctl, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case, the set domain function + i.e. an active render target; in that case, setting the domain blocks the client and waits for rendering to complete before performing any necessary flushing operations). -- cgit v1.2.3 From e355b2014da06458385902c47edf193a997895fc Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:38:48 +0000 Subject: DocBook/drm: Better flow with `, and then' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9ae328aa1dd3..0b6c59d6aa5f 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -735,8 +735,8 @@ void intel_crt_init(struct drm_device *dev) Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM takes care to bind + buffers containing references to previously allocated memory objects, + and then submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding -- cgit v1.2.3 From 964d32dcbefcfda015bc33dc76414b05c6f512de Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:41:31 +0000 Subject: DocBook/drm: Use `; otherwise,' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 0b6c59d6aa5f..606a989d8895 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -743,7 +743,7 @@ void intel_crt_init(struct drm_device *dev) others (a fairly expensive operation), and providing relocation support which hides fixed GTT offsets from clients. Clients must take care not to submit command buffers that reference more objects - than can fit in the GTT or GEM will reject them and no rendering + than can fit in the GTT; otherwise, GEM will reject them and no rendering will occur. Similarly, if several objects in the buffer require fence registers to be allocated for correct rendering (e.g. 2D blits on pre-965 chips), care must be taken not to require more fence -- cgit v1.2.3 From 5a462d58c84a2f5ed161daced2c7df34357c6d3d Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 17:58:46 +0000 Subject: DocBook/drm: Clean up the paragraph on framebuffer objects Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 606a989d8895..a39e76bae03d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -795,14 +795,12 @@ void intel_crt_init(struct drm_device *dev) Framebuffer management - In order to set a mode on a given CRTC, encoder and connector - configuration, clients need to provide a framebuffer object which - provides a source of pixels for the CRTC to deliver to the encoder(s) - and ultimately the connector(s) in the configuration. A framebuffer - is fundamentally a driver specific memory object, made into an opaque - handle by the DRM addfb function. Once an fb has been created this - way it can be passed to the KMS mode setting routines for use in - a configuration. + Clients need to provide a framebuffer object which provides a source + of pixels for a CRTC to deliver to the encoder(s) and ultimately the + connector(s). A framebuffer is fundamentally a driver specific memory + object, made into an opaque handle by the DRM's addfb() function. + Once a framebuffer has been created this way, it may be passed to the + KMS mode setting routines for use in a completed configuration. -- cgit v1.2.3 From a5294e01f2777649834d218583e7a32b2dacb699 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 18:05:52 +0000 Subject: DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a39e76bae03d..65e14f96f943 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -238,7 +238,7 @@ In this specific case, the driver requires AGP and supports - IRQs. DMA, as discussed later, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device-specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -277,7 +277,7 @@ to perform output discovery & configuration at load time. Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to - be omitted. These requirements are driver specific, and care + be omitted. These requirements are driver-specific, and care needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are @@ -288,7 +288,7 @@ Driver private & performance counters The driver private hangs off the main drm_device structure and - can be used for tracking various device specific bits of + can be used for tracking various device-specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a driver may simply allocate one and set drm_device.dev_priv @@ -313,7 +313,7 @@ Configuring the device - Obviously, device configuration is device specific. + Obviously, device configuration is device-specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -340,8 +340,8 @@ Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or - use driver specific versions to offset into your MMIO space - relative to a driver specific base pointer (see I915_READ for + use driver-specific versions to offset into your MMIO space + relative to a driver-specific base pointer (see I915_READ for an example). @@ -399,7 +399,7 @@ and devices with dedicated video RAM (VRAM), i.e. most discrete graphics devices. If your device has dedicated RAM, supporting TTM is desirable. TTM also integrates tightly with your - driver specific buffer execution function. See the radeon + driver-specific buffer execution function. See the radeon driver for examples. @@ -427,7 +427,7 @@ created by the memory manager at runtime. Your global TTM should have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver specific init and + release hooks should point at your driver-specific init and release routines, which probably eventually call ttm_mem_global_init and ttm_mem_global_release, respectively. @@ -438,7 +438,7 @@ provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions may be provided, + driver-specific init and release functions may be provided, likely eventually calling ttm_bo_global_init() and ttm_bo_global_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference @@ -462,7 +462,7 @@ be initialized separately into its own DRM MM object. - Initialization is driver specific. In the case of Intel + Initialization is driver-specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device @@ -561,8 +561,8 @@ void intel_crt_init(struct drm_device *dev) In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device - specific i2c bus is also created for fetching EDID data and + CRT connector and encoder combination is created. A device-specific + i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, the new connector is registered with sysfs to make its properties available to applications. @@ -704,8 +704,8 @@ void intel_crt_init(struct drm_device *dev) GEM-enabled drivers must provide gem_init_object() and gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver - specific ioctls to support command execution, pinning, buffer + allocation routines. They should also provide several driver-specific + ioctls to support command execution, pinning, buffer read & write, mapping, and domain ownership transfers. @@ -797,7 +797,7 @@ void intel_crt_init(struct drm_device *dev) Clients need to provide a framebuffer object which provides a source of pixels for a CRTC to deliver to the encoder(s) and ultimately the - connector(s). A framebuffer is fundamentally a driver specific memory + connector(s). A framebuffer is fundamentally a driver-specific memory object, made into an opaque handle by the DRM's addfb() function. Once a framebuffer has been created this way, it may be passed to the KMS mode setting routines for use in a completed configuration. @@ -807,7 +807,7 @@ void intel_crt_init(struct drm_device *dev) Command submission & fencing - This should cover a few device specific command submission + This should cover a few device-specific command submission implementations. @@ -840,7 +840,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device specific + wrapper functions. In addition, drivers export device-specific interfaces for use by userspace drivers & device aware applications through ioctls and sysfs files. -- cgit v1.2.3 From 7f0925aca586b4a0cce81b06af7383d6aec59cc1 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 18:07:13 +0000 Subject: DocBook/drm: `device aware' -> `device-aware' Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 65e14f96f943..9da9b2831370 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -841,7 +841,7 @@ void intel_crt_init(struct drm_device *dev) The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm wrapper functions. In addition, drivers export device-specific - interfaces for use by userspace drivers & device aware + interfaces for use by userspace drivers & device-aware applications through ioctls and sysfs files. -- cgit v1.2.3 From bcd3cfc1213894ff955771508d46fa18d66e9328 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 29 Aug 2011 19:29:16 +0000 Subject: DocBook/drm: Clean up a todo-note Signed-off-by: Michael Witten --- Documentation/DocBook/drm.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 9da9b2831370..196b8b9dba11 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -850,8 +850,8 @@ void intel_crt_init(struct drm_device *dev) management, memory management, and output management. - Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages should cover the rest. + Cover generic ioctls and sysfs layout here. We only need high-level + info, since man pages should cover the rest. -- cgit v1.2.3 From 2cafbb37a135945ecc07d17f3484ed0dea1aa8b1 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 2 May 2011 16:30:52 -0600 Subject: powerpc/5200: add support for charon board Signed-off-by: Heiko Schocher Acked-by: Benjamin Herrenschmidt Acked-by: Wolfram Sang [squashed with patch to add sm501 node] Signed-off-by: Grant Likely Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/charon.dts | 236 +++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 237 insertions(+) create mode 100644 arch/powerpc/boot/dts/charon.dts diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 000000000000..0e00e508eaa6 --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,236 @@ +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xe0000000 0x04000000 // CS1 range, SM501 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + mode = "640x480-32@60"; + interrupts = <1 1 3>; + little-endian; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index e36d6e232ae6..846b789fb195 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", "manroland,uc101", -- cgit v1.2.3 From 6ecc07b966977bb0855db1fa52d233c39fb3cafb Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 22 Mar 2011 09:27:32 +0100 Subject: powerpc, tqm5200: update tqm5200_defconfig to fit for charon board. added: CONFIG_MTD_OF_PARTS CONFIG_MTD_PLATRAM CONFIG_FIXED_PHY CONFIG_SENSORS_LM80 CONFIG_MFD_SM501 CONFIG_FB CONFIG_FB_FOREIGN_ENDIAN CONFIG_FB_SM501 CONFIG_FRAMEBUFFER_CONSOLE CONFIG_RTC_DRV_DS1374 Signed-off-by: Heiko Schocher Signed-off-by: Grant Likely Signed-off-by: Anatolij Gustschin --- arch/powerpc/configs/52xx/tqm5200_defconfig | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 959cd2cfc275..716a37be16e3 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,9 +1,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y +CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set # CONFIG_EPOLL is not set @@ -17,7 +18,6 @@ CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_BESTCOMM=y -CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set CONFIG_NET=y @@ -38,17 +38,18 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_MISC_DEVICES is not set CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_ATA=y @@ -56,13 +57,11 @@ CONFIG_PATA_MPC52xx=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_LXT_PHY=y +CONFIG_FIXED_PHY=y CONFIG_NET_ETHERNET=y CONFIG_FEC_MPC52xx=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 @@ -70,7 +69,13 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_SENSORS_LM80=y CONFIG_WATCHDOG=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -80,10 +85,10 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y @@ -102,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -- cgit v1.2.3 From cd8e368f475251c0e3c42203f21e68fa25afbb3d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 18 Aug 2011 16:35:44 -0400 Subject: ktest: Add TEST_TYPE install option In testing one of my boxes, I found that I only wanted to build and install the kernel. I wanted to manually reboot the box and test it. Adding a TEST_TYPE option "install" allows this to happen. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 7 +++++++ tools/testing/ktest/sample.conf | 7 ++++--- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8d02ccb10c59..e087cb411c9b 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2929,6 +2929,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { build $build_type or next; } + if ($test_type eq "install") { + get_version; + install; + success $i; + next; + } + if ($test_type ne "build") { my $failed = 0; start_monitor_and_boot or $failed = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index b8bcd14b5a4d..eadca3eb6f5a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -253,9 +253,10 @@ # The default test type (default test) # The test types may be: -# build - only build the kernel, do nothing else -# boot - build and boot the kernel -# test - build, boot and if TEST is set, run the test script +# build - only build the kernel, do nothing else +# install - build and install, but do nothing else (does not reboot) +# boot - build, install, and boot the kernel +# test - build, boot and if TEST is set, run the test script # (If TEST is not set, it defaults back to boot) # bisect - Perform a bisect on the kernel (see BISECT_TYPE below) # patchcheck - Do a test on a series of commits in git (see PATCHCHECK below) -- cgit v1.2.3 From a908a6659ba3e7eb52ea74a78e2f342978aa5f5b Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 12 Aug 2011 15:32:03 +0200 Subject: ktest: Create outputdir if it does not exist Signed-off-by: Andrew Jones Link: http://lkml.kernel.org/r/1313155932-20092-2-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index e087cb411c9b..253e9a2cfbd5 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2850,9 +2850,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { chdir $builddir || die "can't change directory to $builddir"; - if (!-d $tmpdir) { - mkpath($tmpdir) or - die "can't create $tmpdir"; + foreach my $dir ($tmpdir, $outputdir) { + if (!-d $dir) { + mkpath($dir) or + die "can't create $dir"; + } } $ENV{"SSH_USER"} = $ssh_user; -- cgit v1.2.3 From 134882311cb9c2dca2ffadeabc5f8f9faa0fca81 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 12 Aug 2011 15:32:04 +0200 Subject: ktest: Only need to save .config when doing mrproper Only save the .config file if we're doing mrproper Signed-off-by: Andrew Jones Link: http://lkml.kernel.org/r/1313155932-20092-3-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 253e9a2cfbd5..20b0e736b98b 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1272,15 +1272,15 @@ sub build { # allow for empty configs run_command "touch $output_config"; - run_command "mv $output_config $outputdir/config_temp" or - dodie "moving .config"; + if (!$noclean) { + run_command "mv $output_config $outputdir/config_temp" or + dodie "moving .config"; - if (!$noclean && !run_command "$make mrproper") { - dodie "make mrproper"; - } + run_command "$make mrproper" or dodie "make mrproper"; - run_command "mv $outputdir/config_temp $output_config" or - dodie "moving config_temp"; + run_command "mv $outputdir/config_temp $output_config" or + dodie "moving config_temp"; + } } elsif (!$noclean) { unlink "$output_config"; -- cgit v1.2.3 From 2728be418db65aa873ee354168b56f028845e956 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 12 Aug 2011 15:32:05 +0200 Subject: ktest: Include monitor in reboot code Several places that call reboot do the same thing with respect to the monitor. By adding this code into the reboot code, redundant code is removed and it paves the way for the the reset time patch. Signed-off-by: Andrew Jones Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.com Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 20b0e736b98b..debc6898e60b 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -603,8 +603,13 @@ sub doprint { } sub run_command; +sub start_monitor; +sub end_monitor; +sub wait_for_monitor; sub reboot { + my ($time) = @_; + # try to reboot normally if (run_command $reboot) { if (defined($powercycle_after_reboot)) { @@ -615,6 +620,12 @@ sub reboot { # nope? power cycle it. run_command "$power_cycle"; } + + if (defined($time)) { + start_monitor; + wait_for_monitor $time; + end_monitor; + } } sub do_not_reboot { @@ -719,10 +730,7 @@ sub fail { # no need to reboot for just building. if (!do_not_reboot) { doprint "REBOOTING\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } my $name = ""; @@ -1356,10 +1364,7 @@ sub success { if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } } @@ -1500,10 +1505,7 @@ sub run_git_bisect { sub bisect_reboot { doprint "Reboot and sleep $bisect_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $bisect_sleep_time; - end_monitor; + reboot $bisect_sleep_time; } # returns 1 on success, 0 on failure, -1 on skip @@ -2066,10 +2068,7 @@ sub config_bisect { sub patchcheck_reboot { doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $patchcheck_sleep_time; - end_monitor; + reboot $patchcheck_sleep_time; } sub patchcheck { @@ -2659,10 +2658,7 @@ sub make_min_config { } doprint "Reboot and wait $sleep_time seconds\n"; - reboot; - start_monitor; - wait_for_monitor $sleep_time; - end_monitor; + reboot $sleep_time; } success $i; -- cgit v1.2.3 From eaa1fe25ea79e94c6727a67baaca3da0791da5de Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 Sep 2011 17:20:39 -0400 Subject: ktest: Fail when grub menu not found Currently if the grub menu that is supplied is not found, it will just boot into the last grub menu in menu.lst. Fail instead of confusing the user why their kernel is not booting. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index debc6898e60b..ca6ff99ab1a5 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -862,9 +862,12 @@ sub get_grub_index { open(IN, "$ssh_grub |") or die "unable to get menu.lst"; + my $found = 0; + while () { if (/^\s*title\s+$grub_menu\s*$/) { $grub_number++; + $found = 1; last; } elsif (/^\s*title\s/) { $grub_number++; @@ -873,7 +876,7 @@ sub get_grub_index { close(IN); die "Could not find '$grub_menu' in /boot/grub/menu on $machine" - if ($grub_number < 0); + if (!$found); doprint "$grub_number\n"; } -- cgit v1.2.3 From e0a8742e3d4b7649be2ca6f22e7d45153505fc81 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 17:50:48 -0400 Subject: ktest: Add NO_INSTALL option to not install for a test There's cases where running the same kernel over and over again is useful, and being able to not install the same kernel can save time between tests. Add a NO_INSTALL option that tells ktest.pl to not install the new kernel. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 10 +++++++++- tools/testing/ktest/sample.conf | 7 +++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index ca6ff99ab1a5..74fb2acae18d 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -42,6 +42,7 @@ $default{"BISECT_MANUAL"} = 0; $default{"BISECT_SKIP"} = 1; $default{"SUCCESS_LINE"} = "login:"; $default{"DETECT_TRIPLE_FAULT"} = 1; +$default{"NO_INSTALL"} = 0; $default{"BOOTED_TIMEOUT"} = 1; $default{"DIE_ON_FAILURE"} = 1; $default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; @@ -84,6 +85,7 @@ my $grub_number; my $target; my $make; my $post_install; +my $no_install; my $noclean; my $minconfig; my $start_minconfig; @@ -1094,6 +1096,8 @@ sub do_post_install { sub install { + return if ($no_install); + run_scp "$outputdir/$build_target", "$target_image" or dodie "failed to copy image"; @@ -2810,6 +2814,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $reboot_type = set_test_option("REBOOT_TYPE", $i); $grub_menu = set_test_option("GRUB_MENU", $i); $post_install = set_test_option("POST_INSTALL", $i); + $no_install = set_test_option("NO_INSTALL", $i); $reboot_script = set_test_option("REBOOT_SCRIPT", $i); $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i); $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i); @@ -2890,8 +2895,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $run_type = "ERROR"; } + my $installme = ""; + $installme = " no_install" if ($no_install); + doprint "\n\n"; - doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n"; + doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n"; unlink $dmesg; unlink $buildlog; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index eadca3eb6f5a..b3e0dc11fc8a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -294,6 +294,13 @@ # or on some systems: #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION +# If for some reason you just want to boot the kernel and you do not +# want the test to install anything new. For example, you may just want +# to boot test the same kernel over and over and do not want to go through +# the hassle of installing anything, you can set this option to 1 +# (default 0) +#NO_INSTALL = 1 + # If there is a script that you require to run before the build is done # you can specify it with PRE_BUILD. # -- cgit v1.2.3 From 2b803365a6fa177ea7e1f64f645be1cb5dd39d55 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 18:00:23 -0400 Subject: ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle console before starting the next test. By setting the REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the line while rebooting to a new kernel. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 33 +++++++++++++++++++++++++++------ tools/testing/ktest/sample.conf | 10 ++++++++++ 2 files changed, 37 insertions(+), 6 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 74fb2acae18d..51ddaa5ed556 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -117,6 +117,7 @@ my $timeout; my $booted_timeout; my $detect_triplefault; my $console; +my $reboot_success_line; my $success_line; my $stop_after_success; my $stop_after_failure; @@ -612,6 +613,13 @@ sub wait_for_monitor; sub reboot { my ($time) = @_; + if (defined($time)) { + start_monitor; + # flush out current monitor + # May contain the reboot success line + wait_for_monitor 1; + } + # try to reboot normally if (run_command $reboot) { if (defined($powercycle_after_reboot)) { @@ -624,8 +632,7 @@ sub reboot { } if (defined($time)) { - start_monitor; - wait_for_monitor $time; + wait_for_monitor($time, $reboot_success_line); end_monitor; } } @@ -706,16 +713,29 @@ sub end_monitor { } sub wait_for_monitor { - my ($time) = @_; + my ($time, $stop) = @_; + my $full_line = ""; my $line; + my $booted = 0; doprint "** Wait for monitor to settle down **\n"; # read the monitor and wait for the system to calm down - do { + while (!$booted) { $line = wait_for_input($monitor_fp, $time); - print "$line" if (defined($line)); - } while (defined($line)); + last if (!defined($line)); + print "$line"; + $full_line .= $line; + + if (defined($stop) && $full_line =~ /$stop/) { + doprint "wait for monitor detected $stop\n"; + $booted = 1; + } + + if ($line =~ /\n/) { + $full_line = ""; + } + } print "** Monitor flushed **\n"; } @@ -2836,6 +2856,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $console = set_test_option("CONSOLE", $i); $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i); $success_line = set_test_option("SUCCESS_LINE", $i); + $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i); $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i); $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i); $stop_test_after = set_test_option("STOP_TEST_AFTER", $i); diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index b3e0dc11fc8a..67bc4e06922c 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -423,6 +423,14 @@ # (default "login:") #SUCCESS_LINE = login: +# To speed up between reboots, defining a line that the +# default kernel produces that represents that the default +# kernel has successfully booted and can be used to pass +# a new test kernel to it. Otherwise ktest.pl will wait till +# SLEEP_TIME to continue. +# (default undefined) +#REBOOT_SUCCESS_LINE = login: + # In case the console constantly fills the screen, having # a specified time to stop the test after success is recommended. # (in seconds) @@ -488,6 +496,8 @@ # another test. If a reboot to the reliable kernel happens, # we wait SLEEP_TIME for the console to stop producing output # before starting the next test. +# +# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE. # (default 60) #SLEEP_TIME = 60 -- cgit v1.2.3 From 4ab1cce5bdd87948b75ed4fe4a8629c0f76267ae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 18:12:20 -0400 Subject: ktest: Do not reboot on config or build issues Even if REBOOT_ON_ERROR is set, it becomes annoying that the target machine is rebooted when a config option is incorrect or a build fails. There's no reason to reboot the target for host only issues. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 51ddaa5ed556..057676a8e785 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -133,6 +133,9 @@ my %config_help; my %variable; my %force_config; +# do not force reboots on config problems +my $no_reboot = 1; + $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. EOF @@ -640,7 +643,7 @@ sub reboot { sub do_not_reboot { my $i = $iteration; - return $test_type eq "build" || + return $test_type eq "build" || $no_reboot || ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") || ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build"); } @@ -1285,6 +1288,10 @@ sub build { unlink $buildlog; + # Failed builds should not reboot the target + my $save_no_reboot = $no_reboot; + $no_reboot = 1; + if (defined($pre_build)) { my $ret = run_command $pre_build; if (!$ret && defined($pre_build_die) && @@ -1353,10 +1360,15 @@ sub build { if (!$build_ret) { # bisect may need this to pass - return 0 if ($in_bisect); + if ($in_bisect) { + $no_reboot = $save_no_reboot; + return 0; + } fail "failed build" and return 0; } + $no_reboot = $save_no_reboot; + return 1; } @@ -2806,6 +2818,9 @@ sub set_test_option { # First we need to do is the builds for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { + # Do not reboot on failing test options + $no_reboot = 1; + $iteration = $i; my $makecmd = set_test_option("MAKE_CMD", $i); @@ -2941,6 +2956,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { die "failed to checkout $checkout"; } + $no_reboot = 0; + + if ($test_type eq "bisect") { bisect $i; next; -- cgit v1.2.3 From 45d73a5d8a98dbabcdf37e2da5ef5b0412244643 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 19:44:53 -0400 Subject: ktest: Add IF and ELSE to config sections Add IF keyword to sections within the config. Also added an ELSE keyword that allows different config options to be set for a given section. For example: TYPE := 1 STATUS := 0 DEFAULTS IF ${TYPE} [...] ELSE IF ${STATUS} [...] ELSE [...] The above will process the first section as $TYPE is true. If it was false, it would process the last section as $STATUS is false. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 64 ++++++++++++++++++++++++++++++++++++++--- tools/testing/ktest/sample.conf | 38 ++++++++++++++++++++++++ 2 files changed, 98 insertions(+), 4 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 057676a8e785..c76e18f00c44 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -361,6 +361,21 @@ sub set_variable { } } +sub process_if { + my ($name, $value) = @_; + + my $val = process_variables($value); + + if ($val =~ /^\s*0\s*$/) { + return 0; + } elsif ($val =~ /^\s*\d+\s*$/) { + return 1; + } + + die ("$name: $.: Undefined variable $val in if statement\n"); + return 1; +} + sub read_config { my ($config) = @_; @@ -376,6 +391,8 @@ sub read_config { my $skip = 0; my $rest; my $test_case = 0; + my $if = 0; + my $if_set = 0; while () { @@ -397,7 +414,7 @@ sub read_config { $default = 0; $repeat = 1; - if ($rest =~ /\s+SKIP(.*)/) { + if ($rest =~ /\s+SKIP\b(.*)/) { $rest = $1; $skip = 1; } else { @@ -411,9 +428,16 @@ sub read_config { $repeat_tests{"$test_num"} = $repeat; } - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; - $skip = 1; + if ($rest =~ /\sIF\s+(\S*)(.*)/) { + $rest = $2; + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + $if = 1; + } else { + $if = 0; } if ($rest !~ /^\s*$/) { @@ -437,10 +461,42 @@ sub read_config { $skip = 0; } + if ($rest =~ /\sIF\s+(\S*)(.*)/) { + $if = 1; + $rest = $2; + if (process_if($name, $1)) { + $if_set = 1; + } else { + $skip = 1; + } + } else { + $if = 0; + } + if ($rest !~ /^\s*$/) { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } + } elsif (/^\s*ELSE(.*)$/) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $rest = $1; + if ($if_set) { + $skip = 1; + } else { + $skip = 0; + + if ($rest =~ /\sIF\s+(\S*)(.*)/) { + # May be a ELSE IF section. + if (!process_if($name, $1)) { + $skip = 1; + } + } else { + $if = 0; + } + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 67bc4e06922c..6a0a0ba59975 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,44 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# Both TEST_START and DEFAULTS sections can also have the IF keyword +# The value after the IF must evaluate into a 0 or non 0 positive +# integer, and can use the config variables (explained below). +# +# DEFAULTS IF ${IS_X86_32} +# +# The above will process the DEFAULTS section if the config +# variable IS_X86_32 evaluates to a non zero positive integer +# otherwise if it evaluates to zero, it will act the same +# as if the SKIP keyword was used. +# +# The ELSE keyword can be used directly after a section with +# a IF statement. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE +# +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal +# +# +# The ELSE keyword can also contain an IF statement to allow multiple +# if then else sections. But all the sections must be either +# DEFAULT or TEST_START, they can not be a mixture. +# +# TEST_START IF ${RUN_NET_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# +# ELSE IF ${RUN_DISK_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests +# +# ELSE IF ${RUN_CPU_TESTS} +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu +# +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network +# #### Config variables #### # -- cgit v1.2.3 From ab7a3f52cef5ff1c784de7adfbda3421b10754a4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 20:24:07 -0400 Subject: ktest: Let IF keyword take comparisons Allow ==, !=, <=, >=, <, and > to be used in IF statements to compare if a section should be processed or not. For example: BITS := 32 DEFAULTS IF ${BITS} == 32 MIN_CONFIG = ${CONFIG_DIR}/config-32 ELSE MIN_CONFIG = ${CONFIG_DIR}/config-64 Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 54 ++++++++++++++++++++++++++++++++++++----- tools/testing/ktest/sample.conf | 14 +++++++++++ 2 files changed, 62 insertions(+), 6 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index c76e18f00c44..ed20d6881ec9 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -361,11 +361,47 @@ sub set_variable { } } +sub process_compare { + my ($lval, $cmp, $rval) = @_; + + # remove whitespace + + $lval =~ s/^\s*//; + $lval =~ s/\s*$//; + + $rval =~ s/^\s*//; + $rval =~ s/\s*$//; + + if ($cmp eq "==") { + return $lval eq $rval; + } elsif ($cmp eq "!=") { + return $lval ne $rval; + } + + my $statement = "$lval $cmp $rval"; + my $ret = eval $statement; + + # $@ stores error of eval + if ($@) { + return -1; + } + + return $ret; +} + sub process_if { my ($name, $value) = @_; my $val = process_variables($value); + if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { + my $ret = process_compare($1, $2, $3); + if ($ret < 0) { + die "$name: $.: Unable to process comparison\n"; + } + return $ret; + } + if ($val =~ /^\s*0\s*$/) { return 0; } elsif ($val =~ /^\s*\d+\s*$/) { @@ -428,8 +464,8 @@ sub read_config { $repeat_tests{"$test_num"} = $repeat; } - if ($rest =~ /\sIF\s+(\S*)(.*)/) { - $rest = $2; + if ($rest =~ /\sIF\s+(.*)/) { + $rest = ""; if (process_if($name, $1)) { $if_set = 1; } else { @@ -461,14 +497,14 @@ sub read_config { $skip = 0; } - if ($rest =~ /\sIF\s+(\S*)(.*)/) { + if ($rest =~ /\sIF\s+(.*)/) { $if = 1; - $rest = $2; if (process_if($name, $1)) { $if_set = 1; } else { $skip = 1; } + $rest = ""; } else { $if = 0; } @@ -477,26 +513,32 @@ sub read_config { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } - } elsif (/^\s*ELSE(.*)$/) { + } elsif (/^\s*ELSE\b(.*)$/) { if (!$if) { die "$name: $.: ELSE found with out matching IF section\n$_"; } $rest = $1; if ($if_set) { $skip = 1; + $rest = ""; } else { $skip = 0; - if ($rest =~ /\sIF\s+(\S*)(.*)/) { + if ($rest =~ /\sIF\s+(.*)/) { # May be a ELSE IF section. if (!process_if($name, $1)) { $skip = 1; } + $rest = ""; } else { $if = 0; } } + if ($rest !~ /^\s*$/) { + die "$name: $.: Gargbage found after DEFAULTS\n$_"; + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 6a0a0ba59975..4e8fb91fd517 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,8 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# +# # Both TEST_START and DEFAULTS sections can also have the IF keyword # The value after the IF must evaluate into a 0 or non 0 positive # integer, and can use the config variables (explained below). @@ -110,6 +112,18 @@ # ELSE # BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network # +# The if statement may also have comparisons that will and for +# == and !=, strings may be used for both sides. +# +# BOX_TYPE := x86_32 +# +# DEFAULTS IF ${BOX_TYPE} == x86_32 +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32 +# ELSE +# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 +# + + #### Config variables #### # -- cgit v1.2.3 From 2ed3b16128e93309758e62937e7f137ac9844227 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 21:00:00 -0400 Subject: ktest: Add INCLUDE keyword to include other config files Have the reading of the config file allow reading of other config files using the INCLUDE keyword. This allows multiple config files to share config options. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 55 +++++++++++++++++++++++++++++++++++------ tools/testing/ktest/sample.conf | 32 ++++++++++++++++++++++-- 2 files changed, 78 insertions(+), 9 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index ed20d6881ec9..62de47de2b04 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -412,15 +412,16 @@ sub process_if { return 1; } -sub read_config { - my ($config) = @_; +sub __read_config { + my ($config, $current_test_num) = @_; - open(IN, $config) || die "can't read file $config"; + my $in; + open($in, $config) || die "can't read file $config"; my $name = $config; $name =~ s,.*/(.*),$1,; - my $test_num = 0; + my $test_num = $$current_test_num; my $default = 1; my $repeat = 1; my $num_tests_set = 0; @@ -430,7 +431,7 @@ sub read_config { my $if = 0; my $if_set = 0; - while () { + while (<$in>) { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); @@ -539,6 +540,33 @@ sub read_config { die "$name: $.: Gargbage found after DEFAULTS\n$_"; } + } elsif (/^\s*INCLUDE\s+(\S+)/) { + + next if ($skip); + + if (!$default) { + die "$name: $.: INCLUDE can only be done in default sections\n$_"; + } + + my $file = process_variables($1); + + if ($file !~ m,^/,) { + # check the path of the config file first + if ($config =~ m,(.*)/,) { + if (-f "$1/$file") { + $file = "$1/$file"; + } + } + } + + if ( ! -r $file ) { + die "$name: $.: Can't read file $file\n$_"; + } + + if (__read_config($file, \$test_num)) { + $test_case = 1; + } + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { next if ($skip); @@ -594,13 +622,26 @@ sub read_config { } } - close(IN); - if ($test_num) { $test_num += $repeat - 1; $opt{"NUM_TESTS"} = $test_num; } + close($in); + + $$current_test_num = $test_num; + + return $test_case; +} + +sub read_config { + my ($config) = @_; + + my $test_case; + my $test_num = 0; + + $test_case = __read_config $config, \$test_num; + # make sure we have all mandatory configs get_ktest_configs; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 4e8fb91fd517..ae2a93c732ac 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -122,8 +122,36 @@ # ELSE # BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 # - - +# +# INCLUDE file +# +# The INCLUDE keyword may be used in DEFAULT sections. This will +# read another config file and process that file as well. The included +# file can include other files, add new test cases or default +# statements. Config variables will be passed to these files and changes +# to config variables will be seen by top level config files. Including +# a file is processed just like the contents of the file was cut and pasted +# into the top level file, except, that include files that end with +# TEST_START sections will have that section ended at the end of +# the include file. That is, an included file is included followed +# by another DEFAULT keyword. +# +# Unlike other files referenced in this config, the file path does not need +# to be absolute. If the file does not start with '/', then the directory +# that the current config file was located in is used. If no config by the +# given name is found there, then the current directory is searched. +# +# INCLUDE myfile +# DEFAULT +# +# is the same as: +# +# INCLUDE myfile +# +# Note, if the include file does not contain a full path, the file is +# searched first by the location of the original include file, and then +# by the location that ktest.pl was executed in. +# #### Config variables #### # -- cgit v1.2.3 From 0050b6bbef01d871a34a77685047190aa428b210 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 21:10:30 -0400 Subject: ktest: Consolidate TEST_TYPE and DEFAULT code The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 61 +++++++++++++++----------------------------- 1 file changed, 21 insertions(+), 40 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 62de47de2b04..b4f32e734745 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -436,20 +436,29 @@ sub __read_config { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); - if (/^\s*TEST_START(.*)/) { + if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) { - $rest = $1; + my $type = $1; + $rest = $2; - if ($num_tests_set) { - die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; - } + my $old_test_num; + my $old_repeat; + + if ($type eq "TEST_START") { - my $old_test_num = $test_num; - my $old_repeat = $repeat; + if ($num_tests_set) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } - $test_num += $repeat; - $default = 0; - $repeat = 1; + $old_test_num = $test_num; + $old_repeat = $repeat; + + $test_num += $repeat; + $default = 0; + $repeat = 1; + } else { + $default = 1; + } if ($rest =~ /\s+SKIP\b(.*)/) { $rest = $1; @@ -478,42 +487,14 @@ sub __read_config { } if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after TEST_START\n$_"; + die "$name: $.: Gargbage found after $type\n$_"; } - if ($skip) { + if ($skip && $type eq "TEST_START") { $test_num = $old_test_num; $repeat = $old_repeat; } - } elsif (/^\s*DEFAULTS(.*)$/) { - $default = 1; - - $rest = $1; - - if ($rest =~ /\s+SKIP(.*)/) { - $rest = $1; - $skip = 1; - } else { - $skip = 0; - } - - if ($rest =~ /\sIF\s+(.*)/) { - $if = 1; - if (process_if($name, $1)) { - $if_set = 1; - } else { - $skip = 1; - } - $rest = ""; - } else { - $if = 0; - } - - if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after DEFAULTS\n$_"; - } - } elsif (/^\s*ELSE\b(.*)$/) { if (!$if) { die "$name: $.: ELSE found with out matching IF section\n$_"; -- cgit v1.2.3 From 3d1cc41432b0491a39a3185b52bfa1d0411bba10 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 22:14:21 -0400 Subject: ktest: Add OVERRIDE keyword to DEFAULTS section The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 37 +++++++++++++++++++++++++++++-------- tools/testing/ktest/sample.conf | 15 +++++++++++++++ 2 files changed, 44 insertions(+), 8 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index b4f32e734745..7bce412bbdcc 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -337,10 +337,17 @@ sub process_variables { } sub set_value { - my ($lvalue, $rvalue) = @_; + my ($lvalue, $rvalue, $override, $overrides, $name) = @_; if (defined($opt{$lvalue})) { - die "Error: Option $lvalue defined more than once!\n"; + if (!$override || defined(${$overrides}{$lvalue})) { + my $extra = ""; + if ($override) { + $extra = "In the same override section!\n"; + } + die "$name: $.: Option $lvalue defined more than once!\n$extra"; + } + ${$overrides}{$lvalue} = $rvalue; } if ($rvalue =~ /^\s*$/) { delete $opt{$lvalue}; @@ -430,6 +437,9 @@ sub __read_config { my $test_case = 0; my $if = 0; my $if_set = 0; + my $override = 0; + + my %overrides; while (<$in>) { @@ -443,6 +453,7 @@ sub __read_config { my $old_test_num; my $old_repeat; + $override = 0; if ($type eq "TEST_START") { @@ -468,10 +479,20 @@ sub __read_config { $skip = 0; } - if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { - $repeat = $1; - $rest = $2; - $repeat_tests{"$test_num"} = $repeat; + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { + $repeat = $1; + $rest = $2; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ /\sOVERRIDE\b(.*)/) { + # DEFAULT only + $rest = $1; + $override = 1; + # Clear previous overrides + %overrides = (); + } } if ($rest =~ /\sIF\s+(.*)/) { @@ -573,10 +594,10 @@ sub __read_config { } if ($default || $lvalue =~ /\[\d+\]$/) { - set_value($lvalue, $rvalue); + set_value($lvalue, $rvalue, $override, \%overrides, $name); } else { my $val = "$lvalue\[$test_num\]"; - set_value($val, $rvalue); + set_value($val, $rvalue, $override, \%overrides, $name); if ($repeat > 1) { $repeats{$val} = $repeat; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index ae2a93c732ac..0fd3ca30ad0c 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -72,6 +72,21 @@ # the same option name under the same test or as default # ktest will fail to execute, and no tests will run. # +# DEFAULTS OVERRIDE +# +# Options defined in the DEFAULTS section can not be duplicated +# even if they are defined in two different DEFAULT sections. +# This is done to catch mistakes where an option is added but +# the previous option was forgotten about and not commented. +# +# The OVERRIDE keyword can be added to a section to allow this +# section to override other DEFAULT sections values that have +# been defined previously. It will only override options that +# have been defined before its use. Options defined later +# in a non override section will still error. The same option +# can not be defined in the same section even if that section +# is marked OVERRIDE. +# # # # Both TEST_START and DEFAULTS sections can also have the IF keyword -- cgit v1.2.3 From 9900b5dc067551fcdcaec63d013b1d95b36835ae Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 30 Sep 2011 22:41:14 -0400 Subject: ktest: Add DEFINED keyword for IF statements Have IF statements process if a config variable or option has been defined or not. Can use NOT DEFINED in the case for telling if a variable or option has not been defined. DEFAULTS IF NOT DEFINED SSH_USER SSH_USER = root Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 17 ++++++++++++++++- tools/testing/ktest/sample.conf | 17 +++++++++++++++++ 2 files changed, 33 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 7bce412bbdcc..76a5964595da 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -396,6 +396,13 @@ sub process_compare { return $ret; } +sub value_defined { + my ($val) = @_; + + return defined($variable{$2}) || + defined($opt{$2}); +} + sub process_if { my ($name, $value) = @_; @@ -409,13 +416,21 @@ sub process_if { return $ret; } + if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) { + if (defined $1) { + return !value_defined($2); + } else { + return value_defined($2); + } + } + if ($val =~ /^\s*0\s*$/) { return 0; } elsif ($val =~ /^\s*\d+\s*$/) { return 1; } - die ("$name: $.: Undefined variable $val in if statement\n"); + die ("$name: $.: Undefined content $val in if statement\n"); return 1; } diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 0fd3ca30ad0c..7b49f07b6423 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -137,6 +137,23 @@ # ELSE # BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64 # +# The DEFINED keyword can be used by the IF statements too. +# It returns true if the given config variable or option has been defined +# or false otherwise. +# +# +# DEFAULTS IF DEFINED USE_CC +# CC := ${USE_CC} +# ELSE +# CC := gcc +# +# +# As well as NOT DEFINED. +# +# DEFAULTS IF NOT DEFINED MAKE_CMD +# MAKE_CMD := make ARCH=x86 +# +# # # INCLUDE file # -- cgit v1.2.3 From ac6974c76e66c2f9b8b8a23b974c5f3d94302e81 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 4 Oct 2011 09:40:17 -0400 Subject: ktest: Sort make_min_config configs by dependecies The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 71 ++++++++++++++++++++++++++++++-------------- 1 file changed, 49 insertions(+), 22 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 76a5964595da..2a9d04207174 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2372,12 +2372,31 @@ sub patchcheck { } my %depends; +my %depcount; my $iflevel = 0; my @ifdeps; # prevent recursion my %read_kconfigs; +sub add_dep { + # $config depends on $dep + my ($config, $dep) = @_; + + if (defined($depends{$config})) { + $depends{$config} .= " " . $dep; + } else { + $depends{$config} = $dep; + } + + # record the number of configs depending on $dep + if (defined $depcount{$dep}) { + $depcount{$dep}++; + } else { + $depcount{$dep} = 1; + } +} + # taken from streamline_config.pl sub read_kconfig { my ($kconfig) = @_; @@ -2424,30 +2443,19 @@ sub read_kconfig { $config = $2; for (my $i = 0; $i < $iflevel; $i++) { - if ($i) { - $depends{$config} .= " " . $ifdeps[$i]; - } else { - $depends{$config} = $ifdeps[$i]; - } - $state = "DEP"; + add_dep $config, $ifdeps[$i]; } # collect the depends for the config } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { - if (defined($depends{$1})) { - $depends{$config} .= " " . $1; - } else { - $depends{$config} = $1; - } + add_dep $config, $1; # Get the configs that select this config - } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { - if (defined($depends{$1})) { - $depends{$1} .= " " . $config; - } else { - $depends{$1} = $config; - } + } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) { + + # selected by depends on config + add_dep $1, $config; # Check for if statements } elsif (/^if\s+(.*\S)\s*$/) { @@ -2559,11 +2567,18 @@ sub make_new_config { close OUT; } +sub chomp_config { + my ($config) = @_; + + $config =~ s/CONFIG_//; + + return $config; +} + sub get_depends { my ($dep) = @_; - my $kconfig = $dep; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $dep; $dep = $depends{"$kconfig"}; @@ -2613,8 +2628,7 @@ sub test_this_config { return undef; } - my $kconfig = $config; - $kconfig =~ s/CONFIG_//; + my $kconfig = chomp_config $config; # Test dependencies first if (defined($depends{"$kconfig"})) { @@ -2704,6 +2718,14 @@ sub make_min_config { my @config_keys = keys %min_configs; + # All configs need a depcount + foreach my $config (@config_keys) { + my $kconfig = chomp_config $config; + if (!defined $depcount{$kconfig}) { + $depcount{$kconfig} = 0; + } + } + # Remove anything that was set by the make allnoconfig # we shouldn't need them as they get set for us anyway. foreach my $config (@config_keys) { @@ -2742,8 +2764,13 @@ sub make_min_config { # Now disable each config one by one and do a make oldconfig # till we find a config that changes our list. - # Put configs that did not modify the config at the end. my @test_configs = keys %min_configs; + + # Sort keys by who is most dependent on + @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} } + @test_configs ; + + # Put configs that did not modify the config at the end. my $reset = 1; for (my $i = 0; $i < $#test_configs; $i++) { if (!defined($nochange_config{$test_configs[0]})) { -- cgit v1.2.3 From a9f84424be8d12e8a84b9eac112cd1152587d437 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 17 Oct 2011 11:06:29 -0400 Subject: ktest: Fix parsing of config section lines The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 49 ++++++++++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 18 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 2a9d04207174..d292c2d8dfe9 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -449,6 +449,7 @@ sub __read_config { my $num_tests_set = 0; my $skip = 0; my $rest; + my $line; my $test_case = 0; my $if = 0; my $if_set = 0; @@ -465,6 +466,7 @@ sub __read_config { my $type = $1; $rest = $2; + $line = $2; my $old_test_num; my $old_repeat; @@ -486,32 +488,28 @@ sub __read_config { $default = 1; } - if ($rest =~ /\s+SKIP\b(.*)/) { - $rest = $1; + # If SKIP is anywhere in the line, the command will be skipped + if ($rest =~ s/\s+SKIP\b//) { $skip = 1; } else { $test_case = 1; $skip = 0; } - if (!$skip) { - if ($type eq "TEST_START") { - if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { - $repeat = $1; - $rest = $2; - $repeat_tests{"$test_num"} = $repeat; - } - } elsif ($rest =~ /\sOVERRIDE\b(.*)/) { - # DEFAULT only - $rest = $1; - $override = 1; - # Clear previous overrides - %overrides = (); + if ($rest =~ s/\sELSE\b//) { + if (!$if) { + die "$name: $.: ELSE found with out matching IF section\n$_"; + } + $if = 0; + + if ($if_set) { + $skip = 1; + } else { + $skip = 0; } } - if ($rest =~ /\sIF\s+(.*)/) { - $rest = ""; + if ($rest =~ s/\sIF\s+(.*)//) { if (process_if($name, $1)) { $if_set = 1; } else { @@ -520,9 +518,24 @@ sub __read_config { $if = 1; } else { $if = 0; + $if_set = 0; } - if ($rest !~ /^\s*$/) { + if (!$skip) { + if ($type eq "TEST_START") { + if ($rest =~ s/\s+ITERATE\s+(\d+)//) { + $repeat = $1; + $repeat_tests{"$test_num"} = $repeat; + } + } elsif ($rest =~ s/\sOVERRIDE\b//) { + # DEFAULT only + $override = 1; + # Clear previous overrides + %overrides = (); + } + } + + if (!$skip && $rest !~ /^\s*$/) { die "$name: $.: Gargbage found after $type\n$_"; } -- cgit v1.2.3 From 8d735212e441af855afd28ccc402fcaf12999f8d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 17 Oct 2011 11:36:44 -0400 Subject: ktest: Add processing of complex conditionals The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 53 +++++++++++++++++++++++++++++++++++++---- tools/testing/ktest/sample.conf | 10 ++++++++ 2 files changed, 58 insertions(+), 5 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index d292c2d8dfe9..1bda07f6d673 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -304,7 +304,7 @@ sub get_ktest_configs { } sub process_variables { - my ($value) = @_; + my ($value, $remove_undef) = @_; my $retval = ""; # We want to check for '\', and it is just easier @@ -322,6 +322,10 @@ sub process_variables { $retval = "$retval$begin"; if (defined($variable{$var})) { $retval = "$retval$variable{$var}"; + } elsif (defined($remove_undef) && $remove_undef) { + # for if statements, any variable that is not defined, + # we simple convert to 0 + $retval = "${retval}0"; } else { # put back the origin piece. $retval = "$retval\$\{$var\}"; @@ -403,10 +407,40 @@ sub value_defined { defined($opt{$2}); } -sub process_if { - my ($name, $value) = @_; +my $d = 0; +sub process_expression { + my ($name, $val) = @_; + + my $c = $d++; + + while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) { + my $express = $1; + + if (process_expression($name, $express)) { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /; + } else { + $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /; + } + } + + $d--; + my $OR = "\\|\\|"; + my $AND = "\\&\\&"; - my $val = process_variables($value); + while ($val =~ s/^(.*?)($OR|$AND)//) { + my $express = $1; + my $op = $2; + + if (process_expression($name, $express)) { + if ($op eq "||") { + return 1; + } + } else { + if ($op eq "&&") { + return 0; + } + } + } if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) { my $ret = process_compare($1, $2, $3); @@ -431,7 +465,16 @@ sub process_if { } die ("$name: $.: Undefined content $val in if statement\n"); - return 1; +} + +sub process_if { + my ($name, $value) = @_; + + # Convert variables and replace undefined ones with 0 + my $val = process_variables($value, 1); + my $ret = process_expression $name, $val; + + return $ret; } sub __read_config { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 7b49f07b6423..dbedfa196727 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -154,6 +154,16 @@ # MAKE_CMD := make ARCH=x86 # # +# And/or ops (&&,||) may also be used to make complex conditionals. +# +# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf +# +# Notice the use of paranthesis. Without any paranthesis the above would be +# processed the same as: +# +# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf) +# +# # # INCLUDE file # -- cgit v1.2.3 From c54367f9d6be8e19c6e98ae7038438f0377ee138 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 20 Oct 2011 09:56:41 -0400 Subject: ktest: Do not opencode reboot in grub setting When setting the next kernel to boot to with grub, do not opencode the reboot operation. The normal reboot operation can be modified by config options (namely POWERCYCLE_AFTER_REBOOT). This needs to affect all reboots. Remove the opencoded reboot to make sure that any changes to the reboot code also affect all reboots. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 1bda07f6d673..d60c496fb514 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1150,7 +1150,8 @@ sub wait_for_input sub reboot_to { if ($reboot_type eq "grub") { - run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'"; + run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; + reboot; return; } -- cgit v1.2.3 From 9f7424cc86adf55c3fccaa1160b6cf5c6cfc4c02 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 22 Oct 2011 08:58:19 -0400 Subject: ktest: Add another monitor flush before installing kernel On some tests that do multiple boots (patchcheck, bisect, etc), the build of the next kernel to run may finish before the stable kernel has finished booting. Then the install of the new kernel will fail when it tries to connect as the machine has not finished the boot process. Do one more monitor flush to make sure the machine is up and running before trying to connect to it again. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index d60c496fb514..652446dd9e79 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1391,6 +1391,11 @@ sub get_version { } sub start_monitor_and_boot { + # Make sure the stable kernel has finished booting + start_monitor; + wait_for_monitor 5; + end_monitor; + get_grub_index; get_version; install; -- cgit v1.2.3 From 7bf5107347d94bb056c5a0cf78f09e499c3d8f48 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 22 Oct 2011 09:07:03 -0400 Subject: ktest: Add variable ${PWD} Adding the variable ${PWD} that equals `pwd` makes the config files much simpler. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 652446dd9e79..9d9ee321a3dc 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -136,6 +136,9 @@ my %force_config; # do not force reboots on config problems my $no_reboot = 1; +# default variables that can be used +chomp ($variable{"PWD"} = `pwd`); + $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. EOF -- cgit v1.2.3 From 815e2bd7d609da9c7615ea28a3990064a394312f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 28 Oct 2011 07:01:40 -0400 Subject: ktest: Evaluate variables entered on the command line When ktest.pl is called without any arguments, or if the config file does not exist, ktest.pl will ask the user for some information. Some of these questions are code paths. Allowing the user to type ${PWD} for the current directory greatly simplifies these entries. Add variable processing to the entered values. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 9d9ee321a3dc..30e2befd6f2a 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -250,6 +250,7 @@ sub read_yn { sub get_ktest_config { my ($config) = @_; + my $ans; return if (defined($opt{$config})); @@ -263,16 +264,17 @@ sub get_ktest_config { if (defined($default{$config})) { print "\[$default{$config}\] "; } - $entered_configs{$config} = ; - $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/; - if ($entered_configs{$config} =~ /^\s*$/) { + $ans = ; + $ans =~ s/^\s*(.*\S)\s*$/$1/; + if ($ans =~ /^\s*$/) { if ($default{$config}) { - $entered_configs{$config} = $default{$config}; + $ans = $default{$config}; } else { print "Your answer can not be blank\n"; next; } } + $entered_configs{$config} = process_variables($ans); last; } } -- cgit v1.2.3 From f0eb824beee3f596b9799e667a6fdac3116e9f7d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:31:59 +0200 Subject: gpio: pca953x: remove unneeded check for chip type We can assume our own device_id table is correct, so remove checking if the chip type is valid. (The check was bogus anyway: If it found an invalid entry, it returned with 0!) This is in preparation for further cleanups. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely --- drivers/gpio/gpio-pca953x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index c43b8ff626a7..45de6a4ac632 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -673,10 +673,8 @@ static int __devinit pca953x_probe(struct i2c_client *client, if (chip->chip_type == PCA953X_TYPE) device_pca953x_init(chip, invert); - else if (chip->chip_type == PCA957X_TYPE) - device_pca957x_init(chip, invert); else - goto out_failed; + device_pca957x_init(chip, invert); ret = pca953x_irq_setup(chip, id, irq_base); if (ret) -- cgit v1.2.3 From 7ea2aa2046a15af1c048115e7c05f1ba1566899d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Oct 2011 15:32:00 +0200 Subject: gpio: pca953x: propagate the errno from the chip_init functions Initializing the chips may return with an error, but this error gets dropped in probe(). Propagate this further to the driver core. Also, simplify returning the error in one of the init functions. Signed-off-by: Wolfram Sang Cc: Grant Likely Signed-off-by: Grant Likely --- drivers/gpio/gpio-pca953x.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 45de6a4ac632..a3fef0c94ba6 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -595,9 +595,6 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert) /* set platform specific polarity inversion */ ret = pca953x_write_reg(chip, PCA953X_INVERT, invert); - if (ret) - goto out; - return 0; out: return ret; } @@ -639,7 +636,7 @@ static int __devinit pca953x_probe(struct i2c_client *client, struct pca953x_platform_data *pdata; struct pca953x_chip *chip; int irq_base=0, invert=0; - int ret = 0; + int ret; chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL); if (chip == NULL) @@ -672,9 +669,11 @@ static int __devinit pca953x_probe(struct i2c_client *client, pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); if (chip->chip_type == PCA953X_TYPE) - device_pca953x_init(chip, invert); + ret = device_pca953x_init(chip, invert); else - device_pca957x_init(chip, invert); + ret = device_pca957x_init(chip, invert); + if (ret) + goto out_failed; ret = pca953x_irq_setup(chip, id, irq_base); if (ret) -- cgit v1.2.3 From 51ce185af0f71b65c23ed719f72d0241895a61da Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 1 Nov 2011 00:51:30 -0700 Subject: sparc: Hook up process_vm_{readv,writev} syscalls. Signed-off-by: David S. Miller --- arch/sparc/include/asm/unistd.h | 4 +++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 6260d5deeabc..c7cb0af0eb59 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -406,8 +406,10 @@ #define __NR_syncfs 335 #define __NR_sendmmsg 336 #define __NR_setns 337 +#define __NR_process_vm_readv 338 +#define __NR_process_vm_writev 339 -#define NR_syscalls 338 +#define NR_syscalls 340 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 09d8ec454450..63402f9e9f51 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index edbec45d4688..db86b1a0e9a9 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg, sys_setns + .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg, sys_setns + .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev -- cgit v1.2.3 From fb223c32b4d3ee593c8dce07e983680d06abe387 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Wed, 2 Nov 2011 09:15:16 +1100 Subject: crypto: user - Fix rwsem leak in crypto_user The list_empty case in crypto_alg_match() will return without calling up_read() on crypto_alg_sem. We could do the "goto out" routine, but the function will clearly do the right thing with that test simply removed. Signed-off-by: Jonathan Corbet Signed-off-by: Herbert Xu --- crypto/crypto_user.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c index 2abca780312d..0605a2bbba75 100644 --- a/crypto/crypto_user.c +++ b/crypto/crypto_user.c @@ -44,9 +44,6 @@ static struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact) down_read(&crypto_alg_sem); - if (list_empty(&crypto_alg_list)) - return NULL; - list_for_each_entry(q, &crypto_alg_list, cra_list) { int match = 0; -- cgit v1.2.3 From 47a6770ac6cd0d28f14dd9e1b17705abe6f05e41 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 25 Oct 2011 09:35:19 -0700 Subject: msm: boards: Fix fallout from removal of machine_desc in fixup After 0744a3ee (ARM: platform fixups: remove mdesc argument to fixup function, 2010-12-20) the fixup functions introduced in 9e775ad (ARM: 7012/1: Set proper TEXT_OFFSET for newer MSMs, 2011-08-12) cause warnings like: arch/arm/mach-msm/board-msm8x60.c:85: warning: initialization from incompatible pointer type Fix them by removing the machine_desc argument from the fixup functions. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm7x30.c | 4 ++-- arch/arm/mach-msm/board-msm8960.c | 4 ++-- arch/arm/mach-msm/board-msm8x60.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 71de5062c71e..db81ed531031 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -42,8 +42,8 @@ extern struct sys_timer msm_timer; -static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm7x30_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index b04468e7d00e..6dc1cbd2a595 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -32,8 +32,8 @@ #include "devices.h" -static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm8960_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 106170fb1844..eed73e2609ed 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -30,8 +30,8 @@ #include #include -static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm8x60_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && -- cgit v1.2.3 From 86f14df8ed1ecec5cefe7d002b4d297e298238c2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 2 Nov 2011 21:36:32 +0000 Subject: ASoC: Update git repository URL Remove the -2.6 from the name. Signed-off-by: Mark Brown --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index bbf42cd74e2a..63b58dd1561e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6001,7 +6001,7 @@ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) M: Liam Girdwood M: Mark Brown -T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported -- cgit v1.2.3 From a918feef334090692ea65e77a8b0cca5e682e666 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 2 Nov 2011 17:30:49 +0000 Subject: ARM: mxc: fix local timer interrupt handling As local timer interrupts are now handled as normal interrupts, remove the special case in the GIC handler. Cc: Shawn Guo Cc: Sascha Hauer Signed-off-by: Marc Zyngier Tested-and-Acked-by: Shawn Guo --- arch/arm/plat-mxc/gic.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c index b3b8eed263b8..12f8f8109010 100644 --- a/arch/arm/plat-mxc/gic.c +++ b/arch/arm/plat-mxc/gic.c @@ -28,21 +28,14 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) if (irqnr == 1023) break; - if (irqnr > 29 && irqnr < 1021) + if (irqnr > 15 && irqnr < 1021) handle_IRQ(irqnr, regs); #ifdef CONFIG_SMP - else if (irqnr < 16) { + else { writel_relaxed(irqstat, gic_cpu_base_addr + GIC_CPU_EOI); handle_IPI(irqnr, regs); } -#endif -#ifdef CONFIG_LOCAL_TIMERS - else if (irqnr == 29) { - writel_relaxed(irqstat, gic_cpu_base_addr + - GIC_CPU_EOI); - handle_local_timer(regs); - } #endif } while (1); } -- cgit v1.2.3 From 98de0cbbe2e7157fd87d04386621be3eadd4d6ab Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 3 Nov 2011 17:31:26 +0800 Subject: ARM:i.MX: fix build error in tzic/avic.c arch/arm/plat-mxc/tzic.c:105: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'tzic_handle_irq' Signed-off-by: Jason Liu --- arch/arm/plat-mxc/avic.c | 1 + arch/arm/plat-mxc/tzic.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 8875fb415f68..55f15699a383 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "irq-common.h" diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index e993a184189a..a3c164c7ba82 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From 188d7c6b0cfee134cc7fbc61d36223b1d7dfffab Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 3 Nov 2011 17:31:27 +0800 Subject: ARM:i.MX: fix build error in clock-mx51-mx53.c arch/arm/mach-mx5/clock-mx51-mx53.c: In function 'clk_get_freq_dt': arch/arm/mach-mx5/clock-mx51-mx53.c:1643: error: implicit declaration of function 'for_each_compatible_node' arch/arm/mach-mx5/clock-mx51-mx53.c:1643: error: expected ';' before '{' token Signed-off-by: Jason Liu --- arch/arm/mach-mx5/clock-mx51-mx53.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 2aacf41c48e7..6312425c0056 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, return 0; } +#ifdef CONFIG_OF static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc, unsigned long *ckih1, unsigned long *ckih2) { @@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void) clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); return mx53_clocks_init(ckil, osc, ckih1, ckih2); } +#endif -- cgit v1.2.3 From 15394cad2747ea2d98fc88ccb464973e173cd2f8 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Fri, 4 Nov 2011 20:30:18 +0800 Subject: ARM: mxc: Remove test_for_ltirq The patch "ARM: gic: consolidate PPI handling" removes the usage of test_for_ltirq. After the merge of imx6q remove this there, too. Cc: Sascha Hauer Signed-off-by: Dirk Behme Acked-by: Shawn Guo Acked-by: Marc Zyngier --- arch/arm/plat-mxc/include/mach/entry-macro.S | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 9fe0dfcf4e7e..ca5cf26a04b1 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -25,6 +25,3 @@ .macro test_for_ipi, irqnr, irqstat, base, tmp .endm - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - .endm -- cgit v1.2.3 From dfd3b596fbbfa48b8e7966ef996d587157554b69 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 4 Nov 2011 22:13:50 +0900 Subject: sh: Fix cached/uncaced address calculation in 29bit mode In the case of 29bit mode, CAC/UNCAC_ADDR does not return a right address. This revises this problem by using P1SEGADDR and P2SEGADDR in 29bit mode. Reported-by: Yutaro Ebihara Signed-off-by: Nobuhiro Iwamatsu Tested-by: Kuninori Morimoto Tested-by: Simon Horman Cc: stable@kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/page.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index 0dca9a5c6be6..15d970328f71 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -151,8 +151,13 @@ typedef struct page *pgtable_t; #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_UNCACHED_MAPPING +#if defined(CONFIG_29BIT) +#define UNCAC_ADDR(addr) P2SEGADDR(addr) +#define CAC_ADDR(addr) P1SEGADDR(addr) +#else #define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start) #define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET) +#endif #else #define UNCAC_ADDR(addr) ((addr)) #define CAC_ADDR(addr) ((addr)) -- cgit v1.2.3 From 3af1f8a41feab47b232b0c3d3b2322426672480d Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 3 Oct 2011 15:16:47 +0100 Subject: serial: sh-sci: Fix up SH-2A SCIF support. This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: Phil Edworthy Tested-by: Federico Fuga Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 16 ++++++++++++---- drivers/tty/serial/sh-sci.c | 19 +++++++++++++++++++ include/linux/serial_sci.h | 1 + 3 files changed, 32 insertions(+), 4 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index a43124e608c3..0bd744f9a3b7 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -176,10 +176,12 @@ static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 192, 192, 192, 192 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -193,10 +195,12 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 196, 196, 196, 196 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -210,10 +214,12 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 200, 200, 200, 200 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -227,10 +233,12 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 204, 204, 204, 204 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9871c57b348e..1b6ec568f32a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -206,6 +206,25 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCLSR] = sci_reg_invalid, }, + /* + * Common SH-2(A) SCIF definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + /* * Common SH-3 SCIF definitions. */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 8bffe9ae2ca0..5f3939c67dd8 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -67,6 +67,7 @@ enum { SCIx_IRDA_REGTYPE, SCIx_SCIFA_REGTYPE, SCIx_SCIFB_REGTYPE, + SCIx_SH2_SCIF_FIFODATA_REGTYPE, SCIx_SH3_SCIF_REGTYPE, SCIx_SH4_SCIF_REGTYPE, SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, -- cgit v1.2.3 From dd2c0ca1b153b555c09fd8e08f6842e12cf8e87b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 19 Sep 2011 18:51:13 -0700 Subject: sh: clkfwk: add clk_rate_mult_range_round() This provides a clk_rate_mult_range_round() helper for use by some of the CPG PLL ranged multipliers, following the same approach as used by the div ranges. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/core.c | 20 ++++++++++++++++++++ include/linux/sh_clk.h | 3 +++ 2 files changed, 23 insertions(+) diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index dc8d022c07a1..352036b1f9a2 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -173,6 +173,26 @@ long clk_rate_div_range_round(struct clk *clk, unsigned int div_min, return clk_rate_round_helper(&div_range_round); } +static long clk_rate_mult_range_iter(unsigned int pos, + struct clk_rate_round_data *rounder) +{ + return clk_get_rate(rounder->arg) * pos; +} + +long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min, + unsigned int mult_max, unsigned long rate) +{ + struct clk_rate_round_data mult_range_round = { + .min = mult_min, + .max = mult_max, + .func = clk_rate_mult_range_iter, + .arg = clk_get_parent(clk), + .rate = rate, + }; + + return clk_rate_round_helper(&mult_range_round); +} + int clk_rate_table_find(struct clk *clk, struct cpufreq_frequency_table *freq_table, unsigned long rate) diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 3ccf18648d0a..9237c299641c 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -94,6 +94,9 @@ int clk_rate_table_find(struct clk *clk, long clk_rate_div_range_round(struct clk *clk, unsigned int div_min, unsigned int div_max, unsigned long rate); +long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min, + unsigned int mult_max, unsigned long rate); + long clk_round_parent(struct clk *clk, unsigned long target, unsigned long *best_freq, unsigned long *parent_freq, unsigned int div_min, unsigned int div_max); -- cgit v1.2.3 From 8eeea521d9d0fa6afd62df8c6e6566ee946117fa Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Nov 2011 15:52:31 +0000 Subject: ASoC: Don't use wm8994->control_data in wm8994_readable_register() The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6b73efd26991..3d2c3d4711d0 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = { static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = wm8994->control_data; + struct wm8994 *control = codec->control_data; switch (reg) { case WM8994_GPIO_1: -- cgit v1.2.3 From 5a3ad6bd6ae0687cb0ecb424d74221920fbc7f38 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Nov 2011 15:53:48 +0000 Subject: ASoC: Don't use wm8994->control_data when requesting IRQs The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 3d2c3d4711d0..9cb16cc853b3 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3180,9 +3180,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR, wm8994_fifo_error, "FIFO error", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN, wm8994_temp_warn, "Thermal warning", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT, wm8994_temp_shut, "Thermal shutdown", codec); ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE, -- cgit v1.2.3 From 19940b3d55c87d8089a8cb0fa8e5a9918a3846bd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 19 Aug 2011 18:05:05 +0900 Subject: ASoC: Ensure we get an impedence reported for WM8958 jack detect Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown --- include/linux/mfd/wm8994/registers.h | 15 +++++++++++++++ sound/soc/codecs/wm8994.c | 37 +++++++++++++++++++++++++----------- 2 files changed, 41 insertions(+), 11 deletions(-) diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index fae295048a8b..83a9caec0e43 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -1962,6 +1962,21 @@ #define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */ #define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ +/* + * R210 (0xD2) - Mic Detect 3 + */ +#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define WM8958_MICD_STS 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */ +#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */ + /* * R76 (0x4C) - Charge Pump (1) */ diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 9cb16cc853b3..9c982e47eb99 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) { struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->codec; - int reg; + int reg, count; - reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); - if (reg < 0) { - dev_err(codec->dev, "Failed to read mic detect status: %d\n", - reg); - return IRQ_NONE; - } + /* We may occasionally read a detection without an impedence + * range being provided - if that happens loop again. + */ + count = 10; + do { + reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); + if (reg < 0) { + dev_err(codec->dev, + "Failed to read mic detect status: %d\n", + reg); + return IRQ_NONE; + } - if (!(reg & WM8958_MICD_VALID)) { - dev_dbg(codec->dev, "Mic detect data not valid\n"); - goto out; - } + if (!(reg & WM8958_MICD_VALID)) { + dev_dbg(codec->dev, "Mic detect data not valid\n"); + goto out; + } + + if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK)) + break; + + msleep(1); + } while (count--); + + if (count == 0) + dev_warn(codec->dev, "No impedence range reported for jack\n"); #ifndef CONFIG_SND_SOC_WM8994_MODULE trace_snd_soc_jack_irq(dev_name(codec->dev)); -- cgit v1.2.3 From 241fa6e42f5462a82f00ddf5169628a8c3976548 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 11 Oct 2011 11:54:26 -0300 Subject: [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls Currently it is also being checked for non BITMAP type menu controls, breaking the logitech LED control menu added by uvcdynctrl, as well as potentially breaking the powerline frequency menu. Signed-off-by: Hans de Goede Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 10c2364f3e8a..254d32688843 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1016,7 +1016,8 @@ int uvc_query_v4l2_menu(struct uvc_video_chain *chain, menu_info = &mapping->menu_info[query_menu->index]; - if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) { + if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && + (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) { s32 bitmap; if (!ctrl->cached) { @@ -1225,7 +1226,8 @@ int uvc_ctrl_set(struct uvc_video_chain *chain, /* Valid menu indices are reported by the GET_RES request for * UVC controls that support it. */ - if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) { + if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && + (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) { if (!ctrl->cached) { ret = uvc_ctrl_populate_cache(chain, ctrl); if (ret < 0) -- cgit v1.2.3 From a9380ba11fc384a52bcee0884ca6dd069deb6b1b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:20:41 -0300 Subject: [media] mxl111sf: fix return value of mxl111sf_idac_config mxl111sf_idac_config was incorrectly returning val instead of ret Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index 91dc1fc2825b..ae8c2f839fcf 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -332,7 +332,7 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); - return val; + return ret; } /* -- cgit v1.2.3 From 2f4133de28edafcaac3ce6b57faf8f40ed2ff1b9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:29:17 -0300 Subject: [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index ae8c2f839fcf..09787be576ac 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -328,9 +328,11 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, /* set hysteresis value reg: 0x0B<5:0> */ ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, (hysteresis_value & 0x3F)); + mxl_fail(ret); } ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); + mxl_fail(ret); return ret; } -- cgit v1.2.3 From cd834fa693160914029fee128f52e87a79d3e480 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:31:04 -0300 Subject: [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-phy.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c index 09787be576ac..b741b3a7a325 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c @@ -296,8 +296,7 @@ int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) goto fail; ret = mxl111sf_write_reg(state, 0x00, 0x00); - if (mxl_fail(ret)) - goto fail; + mxl_fail(ret); fail: return ret; } -- cgit v1.2.3 From e836a1c078e230dd5a94bb086b186c2be3ec6a84 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 31 Oct 2011 23:46:46 -0300 Subject: [media] mxl111sf: fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix build warning: variable ‘ret’ set but not used in function ‘mxl111sf_i2c_readagain’ Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/mxl111sf-i2c.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c index 2e8c288258a9..34434557ef65 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c @@ -398,7 +398,6 @@ static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, u8 i2c_r_data[24]; u8 i = 0; u8 fifo_status = 0; - int ret; int status = 0; mxl_i2c("read %d bytes", count); @@ -418,7 +417,7 @@ static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, i2c_w_data[4+(i*3)] = 0x00; } - ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); + mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); /* Check for I2C NACK status */ if (mxl111sf_i2c_check_status(state) == 1) { -- cgit v1.2.3 From 45ea6095c8f0d6caad5658306416a5d254f1205e Mon Sep 17 00:00:00 2001 From: "slyich@gmail.com" Date: Mon, 7 Nov 2011 16:08:01 -0500 Subject: btrfs: fix double-free 'tree_root' in 'btrfs_mount()' On error path 'tree_root' is treed in 'free_fs_info()'. No need to free it explicitely. Noticed by SLUB in debug mode: Complete reproducer under usermode linux (discovered on real machine): bdev=/dev/ubda btr_root=/btr /mkfs.btrfs $bdev mount $bdev $btr_root mkdir $btr_root/subvols/ cd $btr_root/subvols/ /btrfs su cr foo /btrfs su cr bar mount $bdev -osubvol=subvols/foo $btr_root/subvols/bar umount $btr_root/subvols/bar which gives device fsid 4d55aa28-45b1-474b-b4ec-da912322195e devid 1 transid 7 /dev/ubda ============================================================================= BUG kmalloc-2048: Object already free ----------------------------------------------------------------------------- INFO: Allocated in btrfs_mount+0x389/0x7f0 age=0 cpu=0 pid=277 INFO: Freed in btrfs_mount+0x51c/0x7f0 age=0 cpu=0 pid=277 INFO: Slab 0x0000000062886200 objects=15 used=9 fp=0x0000000070b4d2d0 flags=0x4081 INFO: Object 0x0000000070b4d2d0 @offset=21200 fp=0x0000000070b4a968 ... Call Trace: 70b31948: [<6008c522>] print_trailer+0xe2/0x130 70b31978: [<6008c5aa>] object_err+0x3a/0x50 70b319a8: [<6008e242>] free_debug_processing+0x142/0x2a0 70b319e0: [<600ebf6f>] btrfs_mount+0x55f/0x7f0 70b319f8: [<6008e5c1>] __slab_free+0x221/0x2d0 Signed-off-by: Sergei Trofimovich Cc: Arne Jansen Cc: Chris Mason Cc: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/super.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 57080dffdfc6..dcd5aef6b614 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -933,8 +933,12 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, * then open_ctree will properly initialize everything later. */ fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS); + if (!fs_info) { + error = -ENOMEM; + goto error_close_devices; + } tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); - if (!fs_info || !tree_root) { + if (!tree_root) { error = -ENOMEM; goto error_close_devices; } @@ -964,7 +968,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, btrfs_close_devices(fs_devices); free_fs_info(fs_info); - kfree(tree_root); } else { char b[BDEVNAME_SIZE]; @@ -992,7 +995,6 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, error_close_devices: btrfs_close_devices(fs_devices); free_fs_info(fs_info); - kfree(tree_root); return ERR_PTR(error); } -- cgit v1.2.3 From a6f05b97d1ba87326bd96f3da9fef994830d6994 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 6 Nov 2011 21:54:12 +0100 Subject: PM / QoS: Set cpu_dma_pm_qos->name Since commit 4a31a334, the name of this misc device is not initialized, which leads to a funny device named /dev/(null) being created and /proc/misc containing an entry with just a number but no name. The latter leads to complaints by cryptsetup, which caused me to investigate this matter. Signed-off-by: Dominik Brodowski Signed-off-by: Rafael J. Wysocki --- kernel/power/qos.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/power/qos.c b/kernel/power/qos.c index 56db75147186..995e3bd3417b 100644 --- a/kernel/power/qos.c +++ b/kernel/power/qos.c @@ -70,6 +70,7 @@ static struct pm_qos_constraints cpu_dma_constraints = { }; static struct pm_qos_object cpu_dma_pm_qos = { .constraints = &cpu_dma_constraints, + .name = "cpu_dma_latency", }; static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); -- cgit v1.2.3 From 5f11161675be1351cadb96c83850e20bf5bcdc48 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 6 Nov 2011 22:00:20 +0100 Subject: Documentation: Fix typo in freezer-subsystem.txt Fix a typo in Documentation/cgroups/freezer-subsystem.txt. Signed-off-by: Rafael J. Wysocki Reviewed-by: Srivatsa S. Bhat Acked-by: Randy Dunlap --- Documentation/cgroups/freezer-subsystem.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c21d77742a07..7e62de1e59ff 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -33,9 +33,9 @@ demonstrate this problem using nested bash shells: From a second, unrelated bash shell: $ kill -SIGSTOP 16690 - $ kill -SIGCONT 16990 + $ kill -SIGCONT 16690 - + This happens because bash can observe both signals and choose how it responds to them. -- cgit v1.2.3 From 1a51cfdc4516a6e1f2c1f8a579630a027c30331a Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Mon, 7 Nov 2011 23:54:53 +0100 Subject: PM / devfreq: fix private_data The "private_date" field in struct devfreq_dev_status almost certainly wants to be "private_data"; since there are no in-tree users of this functionality, now seems like an easy time to make the fix. Signed-off-by: Jonathan Corbet Signed-off-by: Rafael J. Wysocki --- include/linux/devfreq.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index afb94583960c..98ce8124b1cc 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -41,7 +41,7 @@ struct devfreq_dev_status { unsigned long total_time; unsigned long busy_time; unsigned long current_frequency; - void *private_date; + void *private_data; }; /** -- cgit v1.2.3 From 4e549d6d4a32d1a610ad081841d575f64087744a Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 6 Nov 2011 12:57:31 +0100 Subject: MTD: MAPS: bcm963xx-flash.c: explicitly include module.h module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski Signed-off-by: Paul Gortmaker --- drivers/mtd/maps/bcm963xx-flash.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index 608967fe74c6..736ca10ca9f1 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 8f7346bdea64f2e3d02b0bcaf456e391c4cba134 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 6 Nov 2011 21:16:51 +0800 Subject: hwspinlock/u8500: include linux/module.h Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Signed-off-by: Paul Gortmaker --- drivers/hwspinlock/u8500_hsem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..0156af510032 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -21,6 +21,7 @@ * General Public License for more details. */ +#include #include #include #include -- cgit v1.2.3 From 3b8ce3aed986090d9249629f97c53b4dfb8c9783 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 7 Nov 2011 11:17:04 -0500 Subject: mfd: fix build failures in recently added ab5500 code These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by: Axel Lin Signed-off-by: Paul Gortmaker --- drivers/mfd/ab5500-core.c | 1 + drivers/mfd/ab5500-debugfs.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c index 4175544b491b..ec10629a0b0b 100644 --- a/drivers/mfd/ab5500-core.c +++ b/drivers/mfd/ab5500-core.c @@ -13,6 +13,7 @@ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. */ +#include #include #include #include diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 6be1fe6b5f9a..43c0ebb81956 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,6 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ +#include #include #include #include -- cgit v1.2.3 From ad61d64e263228a418fe25809a23d5107cf778a0 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2011 13:36:56 +0000 Subject: powerpc/kvm: Fix build with older toolchains Fix KVM build for older toolchains (found with .powerpc64-unknown-linux-gnu-gcc (crosstool-NG-1.8.1) 4.3.2): AS arch/powerpc/kvm/book3s_hv_rmhandlers.o arch/powerpc/kvm/book3s_hv_rmhandlers.S: Assembler messages: arch/powerpc/kvm/book3s_hv_rmhandlers.S:1388: Error: Unrecognized opcode: `popcntw' make[1]: *** [arch/powerpc/kvm/book3s_hv_rmhandlers.o] Error 1 make: *** [_module_arch/powerpc/kvm] Error 2 Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index f422231d9235..44d8829334ab 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1263,7 +1263,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) addi r6,r5,VCORE_NAPPING_THREADS 31: lwarx r4,0,r6 or r4,r4,r0 - popcntw r7,r4 + PPC_POPCNTW(r7,r4) cmpw r7,r8 bge 2f stwcx. r4,0,r6 -- cgit v1.2.3 From 88cf11b4cca8ee0044d0a10ce100d8c0012b2c5e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 7 Nov 2011 14:49:13 +0000 Subject: powerpc: Add KVM as module to defconfigs Add HV mode KVM to Book3 server 64bit defconfigs as a module. Doesn't add much to the size: text data bss dec hex filename 8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla 8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm This should enable more testing of this configuration. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 4 ++++ arch/powerpc/configs/pseries_defconfig | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 84a685a505fe..535711fcb13c 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -485,3 +485,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=y +CONFIG_VHOST_NET=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 96a58b709705..a72f2415a647 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -362,3 +362,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=y +CONFIG_VHOST_NET=m -- cgit v1.2.3 From c40dd2f76644016ca7677545fc846ec2470d70a1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 2 Nov 2011 14:56:12 +0000 Subject: powerpc: Add System RAM to /proc/iomem We've resisted adding System RAM to /proc/iomem because it is the wrong place for it. Unfortunately we continue to find tools that rely on this behaviour so give up and add it in. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mem.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 16da595ff402..2dd6bdd31fe1 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -555,3 +556,32 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, book3e_hugetlb_preload(vma->vm_mm, address, *ptep); #endif } + +/* + * System memory should not be in /proc/iomem but various tools expect it + * (eg kdump). + */ +static int add_system_ram_resources(void) +{ + struct memblock_region *reg; + + for_each_memblock(memory, reg) { + struct resource *res; + unsigned long base = reg->base; + unsigned long size = reg->size; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + WARN_ON(!res); + + if (res) { + res->name = "System RAM"; + res->start = base; + res->end = base + size - 1; + res->flags = IORESOURCE_MEM; + WARN_ON(request_resource(&iomem_resource, res) < 0); + } + } + + return 0; +} +subsys_initcall(add_system_ram_resources); -- cgit v1.2.3 From 1c8ee73395af762726e9eb628636d3b763618c60 Mon Sep 17 00:00:00 2001 From: Dipankar Sarma Date: Fri, 28 Oct 2011 04:25:32 +0000 Subject: powerpc/numa: NUMA topology support for PowerNV This patch adds support for numa topology on powernv platforms running OPAL formware. It checks for the type of platform at run time and sets the affinity form correctly so that NUMA topology can be discovered correctly. Signed-off-by: Dipankar Sarma Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index c7dd4dec4df8..b22a83a91cb8 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -315,7 +315,10 @@ static int __init find_min_common_depth(void) struct device_node *root; const char *vec5; - root = of_find_node_by_path("/rtas"); + if (firmware_has_feature(FW_FEATURE_OPAL)) + root = of_find_node_by_path("/ibm,opal"); + else + root = of_find_node_by_path("/rtas"); if (!root) root = of_find_node_by_path("/"); @@ -344,12 +347,19 @@ static int __init find_min_common_depth(void) #define VEC5_AFFINITY_BYTE 5 #define VEC5_AFFINITY 0x80 - chosen = of_find_node_by_path("/chosen"); - if (chosen) { - vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL); - if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) { - dbg("Using form 1 affinity\n"); - form1_affinity = 1; + + if (firmware_has_feature(FW_FEATURE_OPAL)) + form1_affinity = 1; + else { + chosen = of_find_node_by_path("/chosen"); + if (chosen) { + vec5 = of_get_property(chosen, + "ibm,architecture-vec-5", NULL); + if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & + VEC5_AFFINITY)) { + dbg("Using form 1 affinity\n"); + form1_affinity = 1; + } } } -- cgit v1.2.3 From a3a9f3b47d12b5f6dfc9c7ed9d7b193d77812195 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 21 Oct 2011 23:56:27 +0000 Subject: powerpc/irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Arnd Bergmann Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/floppy.h | 4 ++-- arch/powerpc/include/asm/xics.h | 4 ++-- arch/powerpc/kernel/smp.c | 2 +- arch/powerpc/platforms/cell/beat.c | 2 +- arch/powerpc/platforms/cell/celleb_scc_pciex.c | 2 +- arch/powerpc/platforms/cell/iommu.c | 3 +-- arch/powerpc/platforms/cell/pmu.c | 2 +- arch/powerpc/platforms/cell/spu_base.c | 9 +++------ arch/powerpc/platforms/powermac/pic.c | 1 - arch/powerpc/platforms/powermac/smp.c | 4 ++-- arch/powerpc/platforms/ps3/device-init.c | 2 +- arch/powerpc/sysdev/mpic.c | 2 -- arch/powerpc/sysdev/ppc4xx_soc.c | 2 +- arch/powerpc/sysdev/xics/xics-common.c | 5 ++--- 14 files changed, 18 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h index 24bd34c57e9d..936a904ae78c 100644 --- a/arch/powerpc/include/asm/floppy.h +++ b/arch/powerpc/include/asm/floppy.h @@ -108,10 +108,10 @@ static int fd_request_irq(void) { if (can_use_virtual_dma) return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); else return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h index bd6c401c0ee5..c48de98ba94e 100644 --- a/arch/powerpc/include/asm/xics.h +++ b/arch/powerpc/include/asm/xics.h @@ -15,8 +15,8 @@ #define DEFAULT_PRIORITY 5 /* - * Mark IPIs as higher priority so we can take them inside interrupts that - * arent marked IRQF_DISABLED + * Mark IPIs as higher priority so we can take them inside interrupts + * FIXME: still true now? */ #define IPI_PRIORITY 4 diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 25ddbfc7dd36..6df70907d60a 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -187,7 +187,7 @@ int smp_request_message_ipi(int virq, int msg) return 1; } #endif - err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU, + err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU, smp_ipi_name[msg], 0); WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n", virq, smp_ipi_name[msg], err); diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c index 232fc384e855..852592b2b712 100644 --- a/arch/powerpc/platforms/cell/beat.c +++ b/arch/powerpc/platforms/cell/beat.c @@ -230,7 +230,7 @@ static int __init beat_register_event(void) } ev->virq = virq; - rc = request_irq(virq, ev->handler, IRQF_DISABLED, + rc = request_irq(virq, ev->handler, 0, ev->typecode, NULL); if (rc != 0) { printk(KERN_ERR "Beat: failed to request virtual IRQ" diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index ae790ac4a589..14be2bd358b8 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -514,7 +514,7 @@ static __init int celleb_setup_pciex(struct device_node *node, virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); if (request_irq(virq, pciex_handle_internal_irq, - IRQF_DISABLED, "pciex", (void *)phb)) { + 0, "pciex", (void *)phb)) { pr_err("PCIEXC:Failed to request irq\n"); goto error; } diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index fc46fcac3921..592c3d51b817 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -412,8 +412,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); BUG_ON(virq == NO_IRQ); - ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED, - iommu->name, iommu); + ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu); BUG_ON(ret); /* set the IOC segment table origin register (and turn on the iommu) */ diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index 1acf36010423..59c1a1694104 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -392,7 +392,7 @@ static int __init cbe_init_pm_irq(void) } rc = request_irq(irq, cbe_pm_irq, - IRQF_DISABLED, "cbe-pmu-0", NULL); + 0, "cbe-pmu-0", NULL); if (rc) { printk("ERROR: Request for irq on node %d failed\n", node); diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 3675da73623f..e94d3ecdd8bb 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -442,8 +442,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); ret = request_irq(spu->irqs[0], spu_irq_class_0, - IRQF_DISABLED, - spu->irq_c0, spu); + 0, spu->irq_c0, spu); if (ret) goto bail0; } @@ -451,8 +450,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); ret = request_irq(spu->irqs[1], spu_irq_class_1, - IRQF_DISABLED, - spu->irq_c1, spu); + 0, spu->irq_c1, spu); if (ret) goto bail1; } @@ -460,8 +458,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); ret = request_irq(spu->irqs[2], spu_irq_class_2, - IRQF_DISABLED, - spu->irq_c2, spu); + 0, spu->irq_c2, spu); if (ret) goto bail2; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index cb40e921a565..901bfbddc3dd 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -272,7 +272,6 @@ static struct irqaction xmon_action = { static struct irqaction gatwick_cascade_action = { .handler = gatwick_action, - .flags = IRQF_DISABLED, .name = "cascade", }; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 9a521dc8e485..9b6a820bdd7d 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void) if (psurge_secondary_virq) rc = request_irq(psurge_secondary_virq, psurge_ipi_intr, - IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL); + IRQF_PERCPU, "IPI", NULL); if (rc) pr_err("Failed to setup secondary cpu IPI\n"); @@ -408,7 +408,7 @@ static int __init smp_psurge_kick_cpu(int nr) static struct irqaction psurge_irqaction = { .handler = psurge_ipi_intr, - .flags = IRQF_DISABLED|IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "primary IPI", }; diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 6c4b5837fc8a..3f175e8aedb4 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -825,7 +825,7 @@ static int ps3_probe_thread(void *data) spin_lock_init(&dev.lock); - res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED, + res = request_irq(irq, ps3_notification_interrupt, 0, "ps3_notification", &dev); if (res) { pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__, diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0842c6f8a3e6..8c7e8528e7c4 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -800,8 +800,6 @@ static void mpic_end_ipi(struct irq_data *d) * IPIs are marked IRQ_PER_CPU. This has the side effect of * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from * applying to them. We EOI them late to avoid re-entering. - * We mark IPI's with IRQF_DISABLED as they must run with - * irqs disabled. */ mpic_eoi(mpic); } diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c index d3d6ce3c33b4..0debcc31ad70 100644 --- a/arch/powerpc/sysdev/ppc4xx_soc.c +++ b/arch/powerpc/sysdev/ppc4xx_soc.c @@ -115,7 +115,7 @@ static int __init ppc4xx_l2c_probe(void) } /* Install error handler */ - if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { + if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) { printk(KERN_ERR "Cannot install L2C error handler" ", cache is not enabled\n"); of_node_put(np); diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 3d93a8ded0f8..63762c672a03 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -134,11 +134,10 @@ static void xics_request_ipi(void) BUG_ON(ipi == NO_IRQ); /* - * IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled, and PERCPU. The handler was set in map. + * IPIs are marked IRQF_PERCPU. The handler was set in map. */ BUG_ON(request_irq(ipi, icp_ops->ipi_action, - IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL)); + IRQF_PERCPU, "IPI", NULL)); } int __init xics_smp_probe(void) -- cgit v1.2.3 From 6ea741a13690da9dbbac76175db8e313b0c4b817 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 21 Oct 2011 23:56:53 +0000 Subject: powerpc/ps3: irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- drivers/ps3/ps3-vuart.c | 2 +- drivers/ps3/ps3stor_lib.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c index d9fb729535a1..fb7300837fee 100644 --- a/drivers/ps3/ps3-vuart.c +++ b/drivers/ps3/ps3-vuart.c @@ -952,7 +952,7 @@ static int ps3_vuart_bus_interrupt_get(void) } result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler, - IRQF_DISABLED, "vuart", &vuart_bus_priv); + 0, "vuart", &vuart_bus_priv); if (result) { pr_debug("%s:%d: request_irq failed (%d)\n", diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c index cc328dec946b..8c3f5adf1bc6 100644 --- a/drivers/ps3/ps3stor_lib.c +++ b/drivers/ps3/ps3stor_lib.c @@ -167,7 +167,7 @@ int ps3stor_setup(struct ps3_storage_device *dev, irq_handler_t handler) goto fail_close_device; } - error = request_irq(dev->irq, handler, IRQF_DISABLED, + error = request_irq(dev->irq, handler, 0, dev->sbd.core.driver->name, dev); if (error) { dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n", -- cgit v1.2.3 From 5233e26ebb90242e3691c185ddda02dc83649e7d Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 12 Oct 2011 08:39:15 +0000 Subject: powerpc/ps3: Fix PS3 repository build warnings Fix uninitialized variable warnings in build of repository.c Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/ps3/repository.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 5e304c292f68..ca40f6afd35d 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -184,7 +184,7 @@ int ps3_repository_read_bus_type(unsigned int bus_index, enum ps3_bus_type *bus_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -199,7 +199,7 @@ int ps3_repository_read_bus_num_dev(unsigned int bus_index, unsigned int *num_dev) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -239,7 +239,7 @@ int ps3_repository_read_dev_type(unsigned int bus_index, unsigned int dev_index, enum ps3_dev_type *dev_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -256,8 +256,8 @@ int ps3_repository_read_dev_intr(unsigned int bus_index, enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id) { int result; - u64 v1; - u64 v2; + u64 v1 = 0; + u64 v2 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -275,7 +275,7 @@ int ps3_repository_read_dev_reg_type(unsigned int bus_index, enum ps3_reg_type *reg_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -615,7 +615,7 @@ int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, unsigned int dev_index, unsigned int *num_regions) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -631,7 +631,7 @@ int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, unsigned int *region_id) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -786,7 +786,7 @@ int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, u64 *region_total) int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -805,7 +805,7 @@ int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -827,8 +827,8 @@ int ps3_repository_read_spu_resource_id(unsigned int res_index, enum ps3_spu_resource_type *resource_type, unsigned int *resource_id) { int result; - u64 v1; - u64 v2; + u64 v1 = 0; + u64 v2 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -854,7 +854,7 @@ static int ps3_repository_read_boot_dat_address(u64 *address) int ps3_repository_read_boot_dat_size(unsigned int *size) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -869,7 +869,7 @@ int ps3_repository_read_boot_dat_size(unsigned int *size) int ps3_repository_read_vuart_av_port(unsigned int *port) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -884,7 +884,7 @@ int ps3_repository_read_vuart_av_port(unsigned int *port) int ps3_repository_read_vuart_sysmgr_port(unsigned int *port) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -919,7 +919,7 @@ int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size) int ps3_repository_read_num_be(unsigned int *num_be) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("ben", 0), -- cgit v1.2.3 From 9fce85f7ff94f1a877c15ad3d6ffbaed4b5cd1a6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 12 Oct 2011 08:42:13 +0000 Subject: powerpc/ps3: Fix lv1_gpu_attribute hcall The lv1_gpu_attribute hcall takes three, not five input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by: Geoff Levand CC: Takashi Iwai Acked-by: Takashi Iwai Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/lv1call.h | 2 +- sound/ppc/snd_ps3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h index 9cd5fc828a37..f77c708c67a0 100644 --- a/arch/powerpc/include/asm/lv1call.h +++ b/arch/powerpc/include/asm/lv1call.h @@ -316,7 +316,7 @@ LV1_CALL(gpu_context_free, 1, 0, 218 ) LV1_CALL(gpu_context_iomap, 5, 0, 221 ) LV1_CALL(gpu_context_attribute, 6, 0, 225 ) LV1_CALL(gpu_context_intr, 1, 1, 227 ) -LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(gpu_attribute, 3, 0, 228 ) LV1_CALL(get_rtc, 0, 2, 232 ) LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index a3ce1b22620d..1aa52eff526a 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -876,7 +876,7 @@ static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) (0x0fUL << 12) | (PS3_AUDIO_IOID); - ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0); + ret = lv1_gpu_attribute(0x100, 0x007, val); if (ret) pr_info("%s: gpu_attribute failed %d\n", __func__, ret); -- cgit v1.2.3 From 5ccf55dd8177295813b68780f0a3c85e47306be1 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Tue, 13 Sep 2011 04:15:31 +0000 Subject: powerpc/kvm: Fix build failure with HV KVM and CBE When running with HV KVM and CBE config options enabled, I get build failures like the following: arch/powerpc/kernel/head_64.o: In function `cbe_system_error_hv': (.text+0x1228): undefined reference to `do_kvm_0x1202' arch/powerpc/kernel/head_64.o: In function `cbe_maintenance_hv': (.text+0x1628): undefined reference to `do_kvm_0x1602' arch/powerpc/kernel/head_64.o: In function `cbe_thermal_hv': (.text+0x1828): undefined reference to `do_kvm_0x1802' This is because we jump to a KVM handler when HV is enabled, but we only generate the handler with PR KVM mode. Signed-off-by: Alexander Graf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index a54d92fec612..cf9c69b9189c 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -267,7 +267,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202) #endif /* CONFIG_CBE_RAS */ STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint) @@ -275,7 +275,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602) #endif /* CONFIG_CBE_RAS */ STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist) @@ -283,7 +283,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802) #endif /* CONFIG_CBE_RAS */ . = 0x3000 -- cgit v1.2.3 From 9a3f530f39f4490eaa18b02719fb74ce5f4d2d86 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 8 Nov 2011 16:22:01 +1100 Subject: md/raid5: abort any pending parity operations when array fails. When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 in 2.6.29. Reported-by: Manish Katiyar Tested-by: Manish Katiyar Acked-by: Dan Williams Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid5.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 472aedfb07cf..318bdae9b56c 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3159,10 +3159,14 @@ static void handle_stripe(struct stripe_head *sh) /* check if the array has lost more than max_degraded devices and, * if so, some requests might need to be failed. */ - if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written) - handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); - if (s.failed > conf->max_degraded && s.syncing) - handle_failed_sync(conf, sh, &s); + if (s.failed > conf->max_degraded) { + sh->check_state = 0; + sh->reconstruct_state = 0; + if (s.to_read+s.to_write+s.written) + handle_failed_stripe(conf, sh, &s, disks, &s.return_bi); + if (s.syncing) + handle_failed_sync(conf, sh, &s); + } /* * might be able to return some write requests if the parity blocks -- cgit v1.2.3 From 257a4b42af7586fab4eaec7f04e6896b86551843 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Nov 2011 16:22:06 +1100 Subject: md/raid5: STRIPE_ACTIVE has lock semantics, add barriers All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: Dan Williams Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 318bdae9b56c..297e26092178 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3110,7 +3110,7 @@ static void handle_stripe(struct stripe_head *sh) struct r5dev *pdev, *qdev; clear_bit(STRIPE_HANDLE, &sh->state); - if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) { + if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) { /* already being handled, ensure it gets handled * again when current action finishes */ set_bit(STRIPE_HANDLE, &sh->state); @@ -3375,7 +3375,7 @@ finish: return_io(s.return_bi); - clear_bit(STRIPE_ACTIVE, &sh->state); + clear_bit_unlock(STRIPE_ACTIVE, &sh->state); } static void raid5_activate_delayed(struct r5conf *conf) -- cgit v1.2.3 From 5a9a51799b23142d2fc3ef94894d3b5ac00d05a5 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Mon, 7 Nov 2011 20:33:25 +0400 Subject: ALSA: intel8x0: Improve comments for VM optimization The recently merged 228cf79376f1 looks a bit hackish while it is not. The change was quite simple. In a virtualized environment the patch unhacks old kludge introduced for old broken AC97 hardware. This patch adds proper comment to "unkludge" code. Signed-off-by: Denis V. Lunev Signed-off-by: Konstantin Ozerkov Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 29e312597f20..c3b9bd0e188e 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1077,6 +1077,13 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs } if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV)) continue; + + /* IO read operation is very expensive inside virtual machine + * as it is emulated. The probability that subsequent PICB read + * will return different result is high enough to loop till + * timeout here. + * Same CIV is strict enough condition to be sure that PICB + * is valid inside VM on emulated card. */ if (chip->inside_vm) break; if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) -- cgit v1.2.3 From dccc1810f41b42773a2e359907f05a7fd10910bd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Nov 2011 07:52:19 +0100 Subject: ALSA: hda - Mute unused capture sources for Realtek codecs When a Realtek codec has a matrix-style capture-source selection, we need to scan all connections instead of only imux items. Otherwise some input might be kept unmuted. Although the corresponding input must be dead so there should be no input from it, it's still safer to mute the route completely. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a24e068a021b..308bb575bc06 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -284,7 +284,7 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, struct alc_spec *spec = codec->spec; const struct hda_input_mux *imux; unsigned int mux_idx; - int i, type; + int i, type, num_conns; hda_nid_t nid; mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx; @@ -307,16 +307,17 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx]; /* no selection? */ - if (snd_hda_get_conn_list(codec, nid, NULL) <= 1) + num_conns = snd_hda_get_conn_list(codec, nid, NULL); + if (num_conns <= 1) return 1; type = get_wcaps_type(get_wcaps(codec, nid)); if (type == AC_WID_AUD_MIX) { /* Matrix-mixer style (e.g. ALC882) */ - for (i = 0; i < imux->num_items; i++) { - unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE; - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, - imux->items[i].index, + int active = imux->items[idx].index; + for (i = 0; i < num_conns; i++) { + unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE; + snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i, HDA_AMP_MUTE, v); } } else { -- cgit v1.2.3 From 816af3bb5022c1468b3d826c645ddc2cac45bc97 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 3 Nov 2011 14:45:48 +0800 Subject: hwspinlock: Don't return a value in __hwspin_unlock Fix below build warning: CC arch/arm/mach-omap2/hwspinlock.o In file included from arch/arm/mach-omap2/hwspinlock.c:22: include/linux/hwspinlock.h: In function '__hwspin_unlock': include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void Signed-off-by: Axel Lin Signed-off-by: Ohad Ben-Cohen --- include/linux/hwspinlock.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 08a2fee40659..aad6bd4b3efd 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -118,7 +118,6 @@ int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags) static inline void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) { - return 0; } static inline int hwspin_lock_get_id(struct hwspinlock *hwlock) -- cgit v1.2.3 From fdcb23634c9b6649bb02c681033d4973491b0e35 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 6 Nov 2011 21:14:16 +0800 Subject: hwspinlock/u8500: fix build error due to undefined label Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin Signed-off-by: Ohad Ben-Cohen --- drivers/hwspinlock/u8500_hsem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c index 143461a95ae4..a120f14814f9 100644 --- a/drivers/hwspinlock/u8500_hsem.c +++ b/drivers/hwspinlock/u8500_hsem.c @@ -108,10 +108,8 @@ static int __devinit u8500_hsem_probe(struct platform_device *pdev) return -ENODEV; io_base = ioremap(res->start, resource_size(res)); - if (!io_base) { - ret = -ENOMEM; - goto free_state; - } + if (!io_base) + return -ENOMEM; /* make sure protocol 1 is selected */ val = readl(io_base + HSEM_CTRL_REG); -- cgit v1.2.3 From 35b09c9bf619c4fc6040c52dcea6bd5bd6af7679 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Oct 2011 14:42:41 +0300 Subject: drm/i915: fix if statement (bogus semi-colon) The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter Signed-off-by: Keith Packard --- drivers/char/agp/intel-gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 66cd0b8096ca..3a8d44886010 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1236,7 +1236,7 @@ static int i9xx_setup(void) intel_private.gtt_bus_addr = reg_addr + gtt_offset; } - if (needs_idle_maps()); + if (needs_idle_maps()) intel_private.base.do_idle_maps = 1; intel_i9xx_setup_flush(); -- cgit v1.2.3 From a08185a3eb658854b29c05bcbfac0f85038ffe9f Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 28 Oct 2011 10:28:00 -0700 Subject: agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is set Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard Reviewed-by: Ben Widawsky --- drivers/char/agp/intel-gtt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 3a8d44886010..c92424ca1a55 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1186,10 +1186,11 @@ static void gen6_cleanup(void) /* Certain Gen5 chipsets require require idling the GPU before * unmapping anything from the GTT when VT-d is enabled. */ -extern int intel_iommu_gfx_mapped; static inline int needs_idle_maps(void) { +#ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; + extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1198,7 +1199,7 @@ static inline int needs_idle_maps(void) gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) && intel_iommu_gfx_mapped) return 1; - +#endif return 0; } -- cgit v1.2.3 From 14660ccd599dc7bd6ecef17408bd76dc853f9b77 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 31 Oct 2011 23:16:21 -0700 Subject: drm/i915: Fix object refcount leak on mmappable size limit error path. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt Cc: stable@kernel.org Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6651c36b6e8a..d18b07adcffa 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1396,7 +1396,7 @@ i915_gem_mmap_gtt(struct drm_file *file, if (obj->base.size > dev_priv->mm.gtt_mappable_end) { ret = -E2BIG; - goto unlock; + goto out; } if (obj->madv != I915_MADV_WILLNEED) { -- cgit v1.2.3 From 2c2dd6ac738d8a22def46e073fb7383cac8fa180 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 12 Oct 2011 13:09:53 -0300 Subject: [media] media: vb2: add a check for uninitialized buffer __buffer_in_use() might be called for empty/uninitialized buffer in the following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes kernel ops in such case. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 979e544388cb..9bb92145ad5a 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -296,14 +296,14 @@ static bool __buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb) { unsigned int plane; for (plane = 0; plane < vb->num_planes; ++plane) { + void *mem_priv = vb->planes[plane].mem_priv; /* * If num_users() has not been provided, call_memop * will return 0, apparently nobody cares about this * case anyway. If num_users() returns more than 1, * we are not the only user of the plane's memory. */ - if (call_memop(q, plane, num_users, - vb->planes[plane].mem_priv) > 1) + if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1) return true; } return false; -- cgit v1.2.3 From 4907602f85d454c127d20ac943ead13e2919898d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 13 Oct 2011 07:07:24 -0300 Subject: [media] media: vb2: set buffer length correctly for all buffer types v4l2_planes[plane].length field was not initialized for userptr buffers. This patch fixes this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 9bb92145ad5a..e7c52ff3c761 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -131,6 +131,7 @@ static void __setup_offsets(struct vb2_queue *q, unsigned int n) continue; for (plane = 0; plane < vb->num_planes; ++plane) { + vb->v4l2_planes[plane].length = q->plane_sizes[plane]; vb->v4l2_planes[plane].m.mem_offset = off; dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n", -- cgit v1.2.3 From bd50d999d4d4f311fda9b777d1e567433cc0f142 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 25 Oct 2011 03:07:59 -0300 Subject: [media] media: vb2: reset queued list on REQBUFS(0) call Queued list was not reset on REQBUFS(0) call. This caused to enqueue a freed buffer to the driver. Reported-by: Angela Wan Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf2-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index e7c52ff3c761..95a3f5e82aef 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -265,6 +265,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) q->num_buffers -= buffers; if (!q->num_buffers) q->memory = 0; + INIT_LIST_HEAD(&q->queued_list); } /** -- cgit v1.2.3 From 43defb118247b9c72d53328aa366bdb154d5ee98 Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Thu, 6 Oct 2011 11:34:05 -0300 Subject: [media] v4l: s5p-mfc: fix reported capabilities MFC uses the multi-plane API, but it reported single-plane when querying capabilities. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-mfc/s5p_mfc_dec.c | 4 ++-- drivers/media/video/s5p-mfc/s5p_mfc_enc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c index 725634d9736d..844a4d7797bc 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c @@ -220,8 +220,8 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT - | V4L2_CAP_STREAMING; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE | + V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING; return 0; } diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c index ecef127dbc66..1e8cdb77d4b8 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -785,8 +785,8 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE - | V4L2_CAP_VIDEO_OUTPUT + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE + | V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING; return 0; } -- cgit v1.2.3 From 60659dd49509f255ad9748411cd4eb3c74a8d8a9 Mon Sep 17 00:00:00 2001 From: Jeongtae Park Date: Fri, 14 Oct 2011 00:03:23 -0300 Subject: [media] MAINTAINERS: add a maintainer for s5p-mfc driver Add a maintainer for s5p-mfc driver. Signed-off-by: Jeongtae Park Acked-by: Marek Szyprowski Acked-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5e587fcaf4dc..e839b95b2723 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1088,6 +1088,7 @@ F: drivers/media/video/s5p-fimc/ ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT M: Kyungmin Park M: Kamil Debski +M: Jeongtae Park L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained -- cgit v1.2.3 From b36b505965e374b284166c2e6b9c1d369d663ea9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Oct 2011 05:03:27 -0300 Subject: [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL Signed-off-by: Hans de Goede Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-event.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 53b190cf225e..9f56f18d509f 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -215,6 +215,9 @@ int v4l2_event_subscribe(struct v4l2_fh *fh, unsigned long flags; unsigned i; + if (sub->type == V4L2_EVENT_ALL) + return -EINVAL; + if (elems < 1) elems = 1; if (sub->type == V4L2_EVENT_CTRL) { -- cgit v1.2.3 From 78c87e863bb3350426fecd14912fd0a546c58ec0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 26 Oct 2011 05:40:27 -0300 Subject: [media] v4l2-event: Remove pending events from fh event queue when unsubscribing The kev pointers inside the pending events queue (the available queue) of the fh point to data inside the sev, unsubscribing frees the sev, thus making these pointers point to freed memory! This patch fixes these dangling pointers in the available queue by removing all matching pending events on unsubscription. Signed-off-by: Hans de Goede Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-event.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 9f56f18d509f..4d01f17497f6 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -285,6 +285,7 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, { struct v4l2_subscribed_event *sev; unsigned long flags; + int i; if (sub->type == V4L2_EVENT_ALL) { v4l2_event_unsubscribe_all(fh); @@ -295,6 +296,11 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, sev = v4l2_event_subscribed(fh, sub->type, sub->id); if (sev != NULL) { + /* Remove any pending events for this subscription */ + for (i = 0; i < sev->in_use; i++) { + list_del(&sev->events[sev_pos(sev, i)].list); + fh->navailable--; + } list_del(&sev->list); sev->fh = NULL; } -- cgit v1.2.3 From e3e72f39b68ec2563d8ef22f9704a66b7f71b638 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 26 Oct 2011 05:52:47 -0300 Subject: [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe Setting sev->fh to NULL causes problems for the del op added in the next patch of this series, since this op needs a way to get to its own data structures, and typically this will be done by using container_of on an embedded v4l2_fh struct. The reason the original code is setting sev->fh to NULL is to signal to users of the event framework that the unsubscription has happened, but since their is no shared lock between the event framework and users of it, this is inherently racy, and it also turns out to be unnecessary as long as both the event framework and the user of the framework do their own locking properly and the user guarantees that it holds no references to the subcribed_event structure after its del operation has been called. This is best explained by looking at the only code currently checking for sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event function. Here is the relevant code from v4l2-ctrls: send_event(): if (sev->fh && (sev->fh != fh || (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) v4l2_event_queue_fh(sev->fh, &ev); Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race on the same sev, then the following could happens: 1) send_event checks sev->fh, finds it is not NULL 2) v4l2_event_unsubscribe sets sev->fh NULL 3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock 4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent to calling: v4l2_event_queue_fh(NULL, &ev) 5) oops, NULL pointer deref. Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and without the (now senseless since always true) sev->fh != NULL check in 1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev) 2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list 3) send_event calls v4l2_event_queue_fh(sev->fh, &ev) 4) v4l2_event_queue_fh blocks on the fh_lock spinlock 5) v4l2_event_unsubscribe unlocks the fh_lock spinlock 6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock 8) v4l2_event_queue_fh takes the fh_lock 7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since sev->list has been removed from fh->subscribed already -> does nothing 9) v4l2_event_queue_fh releases the fh_lock 10) the caller of send_event releases the ctrl lock (mutex) 11) v4l2_ctrls del_event takes the ctrl lock 12) v4l2_ctrls del_event removes sev->node from the ev_subs list 13) v4l2_ctrls del_event releases the ctrl lock 14) v4l2_event_unsubscribe frees the sev, to which no references are being held anymore Signed-off-by: Hans de Goede Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 4 ++-- drivers/media/video/v4l2-event.c | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 5552f8137571..c58c91bbcfbd 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -820,8 +820,8 @@ static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes) fill_event(&ev, ctrl, changes); list_for_each_entry(sev, &ctrl->ev_subs, node) - if (sev->fh && (sev->fh != fh || - (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) + if (sev->fh != fh || + (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)) v4l2_event_queue_fh(sev->fh, &ev); } diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 4d01f17497f6..3d93251f292e 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -302,7 +302,6 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, fh->navailable--; } list_del(&sev->list); - sev->fh = NULL; } spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); -- cgit v1.2.3 From 1249a3a82d08d73ece65ae79e0553cd0f3407a15 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 31 Oct 2011 11:16:44 -0300 Subject: [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls Otherwise the fh changing the master control won't get the inactive state change event for the slave controls. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index c58c91bbcfbd..2ece7093b513 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -946,6 +946,7 @@ static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, if (ctrl->cluster[0]->has_volatiles) ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; } + fh = NULL; } if (changed || update_inactive) { /* If a control was changed that was not one of the controls -- cgit v1.2.3 From e94e05eae9a56e4fad93f18a63ae90e7ff02b576 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 8 Nov 2011 21:57:59 +0800 Subject: arm/mxs: fix mmc device adding for mach-mx28evk The merge commit "526b264 Merge branch 'imx/cleanup' into imx/devel" left a duplicated mx28_add_mxs_mmc() call, which causes the problem below during boot. kobject_add_internal failed for mxs-mmc.1 with -EEXIST, don't try to register things with the same name in the same directory. The patch removes this leftover and also change mmc0 adding to align with mmc1. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index ac2316d53d3c..064ec5abaa55 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -471,7 +471,8 @@ static void __init mx28evk_init(void) "mmc0-slot-power"); if (ret) pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + else + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power"); @@ -480,7 +481,6 @@ static void __init mx28evk_init(void) else mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); gpio_led_register_device(0, &mx28evk_led_data); -- cgit v1.2.3 From 08f2e6312c67fed80df9342e06ad36daf11eb80b Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 8 Nov 2011 18:29:15 +0800 Subject: iommu: omap: Fix compile failure Fix compile failure in drivers/iommu/omap-iommu-debug.c because of missing module.h include. Signed-off-by: Ming Lei Signed-off-by: Joerg Roedel --- drivers/iommu/omap-iommu-debug.c | 1 + drivers/iommu/omap-iovmm.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index 9c192e79f806..288da5c1499d 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c index e8fdb8830f69..46be456fcc00 100644 --- a/drivers/iommu/omap-iovmm.c +++ b/drivers/iommu/omap-iovmm.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include -- cgit v1.2.3 From b52a360b2aa1c59ba9970fb0f52bbb093fcc7a24 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Mon, 7 Nov 2011 16:10:24 +0000 Subject: xfs: Fix possible memory corruption in xfs_readlink Fixes a possible memory corruption when the link is larger than MAXPATHLEN and XFS_DEBUG is not enabled. This also remove the S_ISLNK assert, since the inode mode is checked previously in xfs_readlink_by_handle() and via VFS. Updated to address concerns raised by Ben Hutchings about the loose attention paid to 32- vs 64-bit values, and the lack of handling a potentially negative pathlen value: - Changed type of "pathlen" to be xfs_fsize_t, to match that of ip->i_d.di_size - Added checking for a negative pathlen to the too-long pathlen test, and generalized the message that gets reported in that case to reflect the change As a result, if a negative pathlen were encountered, this function would return EFSCORRUPTED (and would fail an assertion for a debug build)--just as would a too-long pathlen. Signed-off-by: Alex Elder Signed-off-by: Carlos Maiolino Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_vnodeops.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 4ecf2a549060..ce9268a2f56b 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -112,7 +112,7 @@ xfs_readlink( char *link) { xfs_mount_t *mp = ip->i_mount; - int pathlen; + xfs_fsize_t pathlen; int error = 0; trace_xfs_readlink(ip); @@ -122,13 +122,19 @@ xfs_readlink( xfs_ilock(ip, XFS_ILOCK_SHARED); - ASSERT(S_ISLNK(ip->i_d.di_mode)); - ASSERT(ip->i_d.di_size <= MAXPATHLEN); - pathlen = ip->i_d.di_size; if (!pathlen) goto out; + if (pathlen < 0 || pathlen > MAXPATHLEN) { + xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)", + __func__, (unsigned long long) ip->i_ino, + (long long) pathlen); + ASSERT(0); + return XFS_ERROR(EFSCORRUPTED); + } + + if (ip->i_df.if_flags & XFS_IFINLINE) { memcpy(link, ip->i_df.if_u1.if_data, pathlen); link[pathlen] = '\0'; -- cgit v1.2.3 From 272e42b215c52d32e06bf035c1f6b70baa6716bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 28 Oct 2011 09:54:24 +0000 Subject: xfs: constify xfs_item_ops The log item ops aren't nessecarily the biggest exploit vector, but marking them const is easy enough. Also remove the unused xfs_item_ops_t typedef while we're at it. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner Reviewed-by: Alex Elder --- fs/xfs/xfs_buf_item.c | 2 +- fs/xfs/xfs_dquot_item.c | 6 +++--- fs/xfs/xfs_extfree_item.c | 4 ++-- fs/xfs/xfs_inode_item.c | 2 +- fs/xfs/xfs_log.c | 2 +- fs/xfs/xfs_log.h | 2 +- fs/xfs/xfs_trans.h | 6 +++--- 7 files changed, 12 insertions(+), 12 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 1a3513881bce..eac97ef81e2a 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -656,7 +656,7 @@ xfs_buf_item_committing( /* * This is the ops vector shared by all buf log items. */ -static struct xfs_item_ops xfs_buf_item_ops = { +static const struct xfs_item_ops xfs_buf_item_ops = { .iop_size = xfs_buf_item_size, .iop_format = xfs_buf_item_format, .iop_pin = xfs_buf_item_pin, diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c index bb3f71d236d2..0dee0b71029d 100644 --- a/fs/xfs/xfs_dquot_item.c +++ b/fs/xfs/xfs_dquot_item.c @@ -295,7 +295,7 @@ xfs_qm_dquot_logitem_committing( /* * This is the ops vector for dquots */ -static struct xfs_item_ops xfs_dquot_item_ops = { +static const struct xfs_item_ops xfs_dquot_item_ops = { .iop_size = xfs_qm_dquot_logitem_size, .iop_format = xfs_qm_dquot_logitem_format, .iop_pin = xfs_qm_dquot_logitem_pin, @@ -483,7 +483,7 @@ xfs_qm_qoff_logitem_committing( { } -static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { +static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { .iop_size = xfs_qm_qoff_logitem_size, .iop_format = xfs_qm_qoff_logitem_format, .iop_pin = xfs_qm_qoff_logitem_pin, @@ -498,7 +498,7 @@ static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = { /* * This is the ops vector shared by all quotaoff-start log items. */ -static struct xfs_item_ops xfs_qm_qoff_logitem_ops = { +static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = { .iop_size = xfs_qm_qoff_logitem_size, .iop_format = xfs_qm_qoff_logitem_format, .iop_pin = xfs_qm_qoff_logitem_pin, diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index d22e62623437..35c2aff38b20 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -217,7 +217,7 @@ xfs_efi_item_committing( /* * This is the ops vector shared by all efi log items. */ -static struct xfs_item_ops xfs_efi_item_ops = { +static const struct xfs_item_ops xfs_efi_item_ops = { .iop_size = xfs_efi_item_size, .iop_format = xfs_efi_item_format, .iop_pin = xfs_efi_item_pin, @@ -477,7 +477,7 @@ xfs_efd_item_committing( /* * This is the ops vector shared by all efd log items. */ -static struct xfs_item_ops xfs_efd_item_ops = { +static const struct xfs_item_ops xfs_efd_item_ops = { .iop_size = xfs_efd_item_size, .iop_format = xfs_efd_item_format, .iop_pin = xfs_efd_item_pin, diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index b7cf21ba240f..abaafdbb3e65 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -795,7 +795,7 @@ xfs_inode_item_committing( /* * This is the ops vector shared by all buf log items. */ -static struct xfs_item_ops xfs_inode_item_ops = { +static const struct xfs_item_ops xfs_inode_item_ops = { .iop_size = xfs_inode_item_size, .iop_format = xfs_inode_item_format, .iop_pin = xfs_inode_item_pin, diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 2758a6277c52..a14cd89fe465 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -626,7 +626,7 @@ xfs_log_item_init( struct xfs_mount *mp, struct xfs_log_item *item, int type, - struct xfs_item_ops *ops) + const struct xfs_item_ops *ops) { item->li_mountp = mp; item->li_ailp = mp->m_ail; diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h index 78c9039994af..3f7bf451c034 100644 --- a/fs/xfs/xfs_log.h +++ b/fs/xfs/xfs_log.h @@ -137,7 +137,7 @@ struct xfs_trans; void xfs_log_item_init(struct xfs_mount *mp, struct xfs_log_item *item, int type, - struct xfs_item_ops *ops); + const struct xfs_item_ops *ops); xfs_lsn_t xfs_log_done(struct xfs_mount *mp, struct xlog_ticket *ticket, diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h index 603f3eb52041..3ae713c0abd9 100644 --- a/fs/xfs/xfs_trans.h +++ b/fs/xfs/xfs_trans.h @@ -326,7 +326,7 @@ typedef struct xfs_log_item { struct xfs_log_item *); /* buffer item iodone */ /* callback func */ - struct xfs_item_ops *li_ops; /* function list */ + const struct xfs_item_ops *li_ops; /* function list */ /* delayed logging */ struct list_head li_cil; /* CIL pointers */ @@ -341,7 +341,7 @@ typedef struct xfs_log_item { { XFS_LI_IN_AIL, "IN_AIL" }, \ { XFS_LI_ABORTED, "ABORTED" } -typedef struct xfs_item_ops { +struct xfs_item_ops { uint (*iop_size)(xfs_log_item_t *); void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *); void (*iop_pin)(xfs_log_item_t *); @@ -352,7 +352,7 @@ typedef struct xfs_item_ops { void (*iop_push)(xfs_log_item_t *); bool (*iop_pushbuf)(xfs_log_item_t *); void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t); -} xfs_item_ops_t; +}; #define IOP_SIZE(ip) (*(ip)->li_ops->iop_size)(ip) #define IOP_FORMAT(ip,vp) (*(ip)->li_ops->iop_format)(ip, vp) -- cgit v1.2.3 From 810627d9a6d0e8820c798001875bc4e1b7754ebf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 8 Nov 2011 08:56:15 +0000 Subject: xfs: fix force shutdown handling in xfs_end_io Ensure ioend->io_error gets propagated back to e.g. AIO completions. Signed-off-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_aops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 33b13310ee0c..574d4ee9b625 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -189,7 +189,7 @@ xfs_end_io( int error = 0; if (XFS_FORCED_SHUTDOWN(ip->i_mount)) { - error = -EIO; + ioend->io_error = -EIO; goto done; } if (ioend->io_error) -- cgit v1.2.3 From dcaaf9f2c16b56f8bb316881fcd3f15c18fc71e7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Nov 2011 17:50:27 +0100 Subject: ALSA: usb-audio - Fix the missing volume quirks at delayed init In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by: Alexey Fisher Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 109 +++++++++++++++++++++++++++++------------------------- 1 file changed, 59 insertions(+), 50 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 60f65ace7474..c5444e00f0c6 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -765,10 +765,60 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl) * interface to ALSA control for feature/mixer units */ +/* volume control quirks */ +static void volume_control_quirks(struct usb_mixer_elem_info *cval, + struct snd_kcontrol *kctl) +{ + switch (cval->mixer->chip->usb_id) { + case USB_ID(0x0471, 0x0101): + case USB_ID(0x0471, 0x0104): + case USB_ID(0x0471, 0x0105): + case USB_ID(0x0672, 0x1041): + /* quirk for UDA1321/N101. + * note that detection between firmware 2.1.1.7 (N101) + * and later 2.1.1.21 is not very clear from datasheets. + * I hope that the min value is -15360 for newer firmware --jk + */ + if (!strcmp(kctl->id.name, "PCM Playback Volume") && + cval->min == -15616) { + snd_printk(KERN_INFO + "set volume quirk for UDA1321/N101 chip\n"); + cval->max = -256; + } + break; + + case USB_ID(0x046d, 0x09a4): + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set volume quirk for QuickCam E3500\n"); + cval->min = 6080; + cval->max = 8768; + cval->res = 192; + } + break; + + case USB_ID(0x046d, 0x0808): + case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x0991): + /* Most audio usb devices lie about volume resolution. + * Most Logitech webcams have res = 384. + * Proboly there is some logitech magic behind this number --fishor + */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set resolution quirk: cval->res = 384\n"); + cval->res = 384; + } + break; + + } +} + /* * retrieve the minimum and maximum values for the specified control */ -static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) +static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval, + int default_min, struct snd_kcontrol *kctl) { /* for failsafe */ cval->min = default_min; @@ -844,6 +894,9 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) cval->initialized = 1; } + if (kctl) + volume_control_quirks(cval, kctl); + /* USB descriptions contain the dB scale in 1/256 dB unit * while ALSA TLV contains in 1/100 dB unit */ @@ -864,6 +917,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) return 0; } +#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL) /* get a feature/mixer unit info */ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) @@ -882,7 +936,7 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_ uinfo->value.integer.max = 1; } else { if (!cval->initialized) { - get_min_max(cval, 0); + get_min_max_with_quirks(cval, 0, kcontrol); if (cval->initialized && cval->dBmin >= cval->dBmax) { kcontrol->vd[0].access &= ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ | @@ -1045,9 +1099,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, cval->ch_readonly = readonly_mask; } - /* get min/max values */ - get_min_max(cval, 0); - /* if all channels in the mask are marked read-only, make the control * read-only. set_cur_mix_value() will check the mask again and won't * issue write commands to read-only channels. */ @@ -1069,6 +1120,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); + /* get min/max values */ + get_min_max_with_quirks(cval, 0, kctl); + switch (control) { case UAC_FU_MUTE: case UAC_FU_VOLUME: @@ -1118,51 +1172,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, break; } - /* volume control quirks */ - switch (state->chip->usb_id) { - case USB_ID(0x0471, 0x0101): - case USB_ID(0x0471, 0x0104): - case USB_ID(0x0471, 0x0105): - case USB_ID(0x0672, 0x1041): - /* quirk for UDA1321/N101. - * note that detection between firmware 2.1.1.7 (N101) - * and later 2.1.1.21 is not very clear from datasheets. - * I hope that the min value is -15360 for newer firmware --jk - */ - if (!strcmp(kctl->id.name, "PCM Playback Volume") && - cval->min == -15616) { - snd_printk(KERN_INFO - "set volume quirk for UDA1321/N101 chip\n"); - cval->max = -256; - } - break; - - case USB_ID(0x046d, 0x09a4): - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set volume quirk for QuickCam E3500\n"); - cval->min = 6080; - cval->max = 8768; - cval->res = 192; - } - break; - - case USB_ID(0x046d, 0x0808): - case USB_ID(0x046d, 0x0809): - case USB_ID(0x046d, 0x0991): - /* Most audio usb devices lie about volume resolution. - * Most Logitech webcams have res = 384. - * Proboly there is some logitech magic behind this number --fishor - */ - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set resolution quirk: cval->res = 384\n"); - cval->res = 384; - } - break; - - } - range = (cval->max - cval->min) / cval->res; /* Are there devices with volume range more than 255? I use a bit more * to be sure. 384 is a resolution magic number found on Logitech -- cgit v1.2.3 From eca55f4d9c1d918c2aa95fb8a73a34e2ba8a1b11 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 8 Nov 2011 13:07:36 +0000 Subject: ARM: msm: fix compilation flags for MSM_SCM CONFIG_MSM_SCM uses the smc instruction, which with some toolchains requires a ".arch_extension" directive. Cc: David Brown Signed-off-by: Marc Zyngier Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 ++ arch/arm/mach-msm/scm.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4285dfd80b6f..4ad3969b9881 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) + obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index 232f97a04504..bafabb502580 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr) __asmeq("%1", "r0") __asmeq("%2", "r1") __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif "smc #0 @ switch to secure world\n" : "=r" (r0) : "r" (r0), "r" (r1), "r" (r2) -- cgit v1.2.3 From a8d12007c795f3d69ee0b2d29f0abfefd55c6120 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 8 Nov 2011 18:02:10 +0000 Subject: n_gsm: Fix timings Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/tty/n_gsm.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4cb0d0a3e57b..fc7bbba585ce 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -66,14 +66,16 @@ static int debug; module_param(debug, int, 0600); -#define T1 (HZ/10) -#define T2 (HZ/3) -#define N2 3 +/* Defaults: these are from the specification */ + +#define T1 10 /* 100mS */ +#define T2 34 /* 333mS */ +#define N2 3 /* Retry 3 times */ /* Use long timers for testing at low speed with debug on */ #ifdef DEBUG_TIMING -#define T1 HZ -#define T2 (2 * HZ) +#define T1 100 +#define T2 200 #endif /* -- cgit v1.2.3 From 917c16b2b69fc2eeb432eabca73258f08c58361e Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 8 Nov 2011 14:49:59 -0500 Subject: Btrfs: fix oops on NULL trans handle in btrfs_truncate If we fail to reserve space in the transaction during truncate, we can error out with a NULL trans handle. The cleanup code needs an extra check to make sure we aren't trying to use the bad handle. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 9d0eaa57d4ee..f60e2490bd0d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6529,14 +6529,16 @@ end_trans: ret = btrfs_orphan_del(NULL, inode); } - trans->block_rsv = &root->fs_info->trans_block_rsv; - ret = btrfs_update_inode(trans, root, inode); - if (ret && !err) - err = ret; + if (trans) { + trans->block_rsv = &root->fs_info->trans_block_rsv; + ret = btrfs_update_inode(trans, root, inode); + if (ret && !err) + err = ret; - nr = trans->blocks_used; - ret = btrfs_end_transaction_throttle(trans, root); - btrfs_btree_balance_dirty(root, nr); + nr = trans->blocks_used; + ret = btrfs_end_transaction_throttle(trans, root); + btrfs_btree_balance_dirty(root, nr); + } out: btrfs_free_block_rsv(root, rsv); -- cgit v1.2.3 From 6aec187a90aeb883533c9180e2acac1e54c87f7d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 8 Nov 2011 14:56:50 -0500 Subject: drivers/media: video/a5k6aa is a module and so needs module.h This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: Paul Gortmaker --- drivers/media/video/s5k6aa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 2446736b7871..0df7f2a41814 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From b9c913f327ccc5cf422b6dc9b5acfbc9b86e7b62 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Nov 2011 12:17:25 -0800 Subject: x86 platform drivers: make Dell laptop driver select needed LED support Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by: Alessandro Suardi Acked-by: Matthew Garrett Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f4e3d82379d7..598d5b82a6bc 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -85,6 +85,8 @@ config DELL_LAPTOP depends on RFKILL || RFKILL = n depends on POWER_SUPPLY depends on SERIO_I8042 + select LEDS_CLASS + select NEW_LEDS default n ---help--- This driver adds support for rfkill and backlight control to Dell -- cgit v1.2.3 From 7fd2ae21a42d178982679b86086661292b4afe4a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 8 Nov 2011 15:47:34 -0500 Subject: Btrfs: fix our reservations for updating an inode when completing io People have been reporting ENOSPC crashes in finish_ordered_io. This is because we try to steal from the delalloc block rsv to satisfy a reservation to update the inode. The problem with this is we don't explicitly save space for updating the inode when doing delalloc. This is kind of a problem and we've gotten away with this because way back when we just stole from the delalloc reserve without any questions, and this worked out fine because generally speaking the leaf had been modified either by the mtime update when we did the original write or because we just updated the leaf when we inserted the file extent item, only on rare occasions had the leaf not actually been modified, and that was still ok because we'd just use a block or two out of the over-reservation that is delalloc. Then came the delayed inode stuff. This is amazing, except it wants a full reservation for updating the inode since it may do it at some point down the road after we've written the blocks and we have to recow everything again. This worked out because the delayed inode stuff just stole from the global reserve, that is until recently when I changed that because it caused other problems. So here we are, we're doing everything right and being screwed for it. So take an extra reservation for the inode at delalloc reservation time and carry it through the life of the delalloc reservation. If we need it we can steal it in the delayed inode stuff. If we have already stolen it try and do a normal metadata reservation. If that fails try to steal from the delalloc reservation. If _that_ fails we'll get a WARN_ON() so I can start thinking of a better way to solve this and in the meantime we'll steal from the global reserve. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't see any problems. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/btrfs_inode.h | 4 +-- fs/btrfs/delayed-inode.c | 65 +++++++++++++++++++++++++++++++++++++++++++++--- fs/btrfs/extent-tree.c | 22 +++++++++++++--- fs/btrfs/inode.c | 1 + 4 files changed, 83 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 5a5d325a3935..634608d2a6d0 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -147,14 +147,12 @@ struct btrfs_inode { * the btrfs file release call will add this inode to the * ordered operations list so that we make sure to flush out any * new data the application may have written before commit. - * - * yes, its silly to have a single bitflag, but we might grow more - * of these. */ unsigned ordered_data_close:1; unsigned orphan_meta_reserved:1; unsigned dummy_inode:1; unsigned in_defrag:1; + unsigned delalloc_meta_reserved:1; /* * always compress this one file diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index bbe8496d5339..313ee14cf3b7 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -617,12 +617,14 @@ static void btrfs_delayed_item_release_metadata(struct btrfs_root *root, static int btrfs_delayed_inode_reserve_metadata( struct btrfs_trans_handle *trans, struct btrfs_root *root, + struct inode *inode, struct btrfs_delayed_node *node) { struct btrfs_block_rsv *src_rsv; struct btrfs_block_rsv *dst_rsv; u64 num_bytes; int ret; + int release = false; src_rsv = trans->block_rsv; dst_rsv = &root->fs_info->delayed_block_rsv; @@ -652,11 +654,67 @@ static int btrfs_delayed_inode_reserve_metadata( if (!ret) node->bytes_reserved = num_bytes; return ret; + } else if (src_rsv == &root->fs_info->delalloc_block_rsv) { + spin_lock(&BTRFS_I(inode)->lock); + if (BTRFS_I(inode)->delalloc_meta_reserved) { + BTRFS_I(inode)->delalloc_meta_reserved = 0; + spin_unlock(&BTRFS_I(inode)->lock); + release = true; + goto migrate; + } + spin_unlock(&BTRFS_I(inode)->lock); + + /* Ok we didn't have space pre-reserved. This shouldn't happen + * too often but it can happen if we do delalloc to an existing + * inode which gets dirtied because of the time update, and then + * isn't touched again until after the transaction commits and + * then we try to write out the data. First try to be nice and + * reserve something strictly for us. If not be a pain and try + * to steal from the delalloc block rsv. + */ + ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes); + if (!ret) + goto out; + + ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); + if (!ret) + goto out; + + /* + * Ok this is a problem, let's just steal from the global rsv + * since this really shouldn't happen that often. + */ + WARN_ON(1); + ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv, + dst_rsv, num_bytes); + goto out; } +migrate: ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); - if (!ret) - node->bytes_reserved = num_bytes; + if (unlikely(ret)) { + /* This shouldn't happen */ + BUG_ON(release); + return ret; + } + +out: + /* + * Migrate only takes a reservation, it doesn't touch the size of the + * block_rsv. This is to simplify people who don't normally have things + * migrated from their block rsv. If they go to release their + * reservation, that will decrease the size as well, so if migrate + * reduced size we'd end up with a negative size. But for the + * delalloc_meta_reserved stuff we will only know to drop 1 reservation, + * but we could in fact do this reserve/migrate dance several times + * between the time we did the original reservation and we'd clean it + * up. So to take care of this, release the space for the meta + * reservation here. I think it may be time for a documentation page on + * how block rsvs. work. + */ + if (release) + btrfs_block_rsv_release(root, src_rsv, num_bytes); + node->bytes_reserved = num_bytes; return ret; } @@ -1708,7 +1766,8 @@ int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, goto release_node; } - ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node); + ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode, + delayed_node); if (ret) goto release_node; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 18ea90c8943b..0b044e509e9f 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4063,23 +4063,30 @@ int btrfs_snap_reserve_metadata(struct btrfs_trans_handle *trans, */ static unsigned drop_outstanding_extent(struct inode *inode) { + unsigned drop_inode_space = 0; unsigned dropped_extents = 0; BUG_ON(!BTRFS_I(inode)->outstanding_extents); BTRFS_I(inode)->outstanding_extents--; + if (BTRFS_I(inode)->outstanding_extents == 0 && + BTRFS_I(inode)->delalloc_meta_reserved) { + drop_inode_space = 1; + BTRFS_I(inode)->delalloc_meta_reserved = 0; + } + /* * If we have more or the same amount of outsanding extents than we have * reserved then we need to leave the reserved extents count alone. */ if (BTRFS_I(inode)->outstanding_extents >= BTRFS_I(inode)->reserved_extents) - return 0; + return drop_inode_space; dropped_extents = BTRFS_I(inode)->reserved_extents - BTRFS_I(inode)->outstanding_extents; BTRFS_I(inode)->reserved_extents -= dropped_extents; - return dropped_extents; + return dropped_extents + drop_inode_space; } /** @@ -4165,9 +4172,18 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) nr_extents = BTRFS_I(inode)->outstanding_extents - BTRFS_I(inode)->reserved_extents; BTRFS_I(inode)->reserved_extents += nr_extents; + } - to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); + /* + * Add an item to reserve for updating the inode when we complete the + * delalloc io. + */ + if (!BTRFS_I(inode)->delalloc_meta_reserved) { + nr_extents++; + BTRFS_I(inode)->delalloc_meta_reserved = 1; } + + to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); to_reserve += calc_csum_metadata_size(inode, num_bytes, 1); spin_unlock(&BTRFS_I(inode)->lock); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f60e2490bd0d..2b920596c126 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6607,6 +6607,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->orphan_meta_reserved = 0; ei->dummy_inode = 0; ei->in_defrag = 0; + ei->delalloc_meta_reserved = 0; ei->force_compress = BTRFS_COMPRESS_NONE; ei->delayed_node = NULL; -- cgit v1.2.3 From dccefb3729c8c2b17e45c68cdc0d575f2473a5f0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Nov 2011 12:49:29 -0800 Subject: x86 platform drivers: add POWER_SUPPLY to selected drivers for Dell The Kconfig loop detection goes crazy without this. Signed-off-by: Linus Torvalds --- drivers/platform/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 598d5b82a6bc..7f43cf86d776 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -83,8 +83,8 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n - depends on POWER_SUPPLY depends on SERIO_I8042 + select POWER_SUPPLY select LEDS_CLASS select NEW_LEDS default n -- cgit v1.2.3 From 156acb166ea9a43d7fcdf9b8051694ce4e91dbfc Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 8 Nov 2011 22:34:00 +0100 Subject: PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by: Thomas Meyer Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 434a6c011675..95706fa24c73 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -669,7 +669,7 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev) struct device_opp *dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) - return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */ + return ERR_CAST(dev_opp); /* matching type */ return &dev_opp->head; } -- cgit v1.2.3 From 24ed6ddd9cbf084f1a2dfa3ef66287e5277002e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 25 Oct 2011 21:14:10 +0200 Subject: m68k: Revive lost ARAnyM config options commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the ARAnyM config options. Re-add them to the "Platform devices" section. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.devices | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index d214034be6a6..6033f5d4e67e 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -24,6 +24,37 @@ config PROC_HARDWARE including the model, CPU, MMU, clock speed, BogoMIPS rating, and memory size. +config NATFEAT + bool "ARAnyM emulator support" + depends on ATARI + help + This option enables support for ARAnyM native features, such as + access to a disk image as /dev/hda. + +config NFBLOCK + tristate "NatFeat block device support" + depends on BLOCK && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat block device + which allows direct access to the hard drives without using + the hardware emulation. + +config NFCON + tristate "NatFeat console driver" + depends on NATFEAT + help + Say Y to include support for the ARAnyM NatFeat console driver + which allows the console output to be redirected to the stderr + output of ARAnyM. + +config NFETH + tristate "NatFeat Ethernet support" + depends on ETHERNET && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat network device + which will emulate a regular ethernet device while presenting an + ethertap device to the host system. + endmenu menu "Character devices" -- cgit v1.2.3 From 59433a59b073b88cb32efd03af8ac9b13d56f4cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 28 Oct 2011 22:37:21 +0200 Subject: m68k: Revive lost DIO bus config option commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the DIO bus config option. Re-add it to the "Bus support" section. Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig.bus | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index 8294f0c1785e..3adb499584fb 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -2,6 +2,15 @@ if MMU comment "Bus Support" +config DIO + bool "DIO bus support" + depends on HP300 + default y + help + Say Y here to enable support for the "DIO" expansion bus used in + HP300 machines. If you are using such a system you almost certainly + want this. + config NUBUS bool depends on MAC -- cgit v1.2.3 From 3ec7215e5d1a714ef65069a1d0999a31e4930bb7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 25 May 2011 21:40:59 +0200 Subject: ide-{cd,floppy,tape}: Do not include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The top of has this comment: * Please do not include this file in generic code. There is currently * no requirement for any architecture to implement anything held * within this file. * * Thanks. --rmk Remove inclusion of , to prevent the following compile error from happening soon: | include/linux/irq.h:132: error: redefinition of ‘struct irq_data’ | include/linux/irq.h:286: error: redefinition of ‘struct irq_chip’ Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner Acked-by: Borislav Petkov Cc: linux-ide@vger.kernel.org --- drivers/ide/ide-cd.c | 1 - drivers/ide/ide-floppy.c | 1 - drivers/ide/ide-tape.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 04b09564bfa9..8126824daccb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -43,7 +43,6 @@ /* For SCSI -> ATAPI command conversion */ #include -#include #include #include #include diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 61fdf544fbd6..3d42043fec51 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -35,7 +35,6 @@ #include #include -#include #include #include #include diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7ecb1ade8874..ce8237d36159 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include -- cgit v1.2.3 From c288bf2533e57174b90b07860c4391bcd1ea269c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2011 22:31:28 +0200 Subject: m68k/irq: Rename irq_controller to irq_chip Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/amiga/amiints.c | 9 +++-- arch/m68k/amiga/cia.c | 18 +++++----- arch/m68k/apollo/dn_ints.c | 11 +++--- arch/m68k/atari/ataints.c | 15 ++++---- arch/m68k/include/asm/irq.h | 15 ++++---- arch/m68k/kernel/ints.c | 86 ++++++++++++++++++++++----------------------- arch/m68k/mac/macints.c | 9 +++-- arch/m68k/q40/q40ints.c | 17 +++++---- arch/m68k/sun3/sun3ints.c | 13 ++++--- 9 files changed, 91 insertions(+), 102 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c5b5212cc3f9..320c5d048dc7 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -52,11 +52,10 @@ static irqreturn_t ami_int3(int irq, void *dev_id); static irqreturn_t ami_int4(int irq, void *dev_id); static irqreturn_t ami_int5(int irq, void *dev_id); -static struct irq_controller amiga_irq_controller = { +static struct irq_chip amiga_irq_chip = { .name = "amiga", - .lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock), - .enable = amiga_enable_irq, - .disable = amiga_disable_irq, + .irq_enable = amiga_enable_irq, + .irq_disable = amiga_disable_irq, }; /* @@ -81,7 +80,7 @@ void __init amiga_init_IRQ(void) if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) pr_err("Couldn't register int%d\n", 5); - m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS); + m68k_setup_irq_chip(&amiga_irq_chip, IRQ_USER, AMI_STD_IRQS); /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index ecd0f7ca6f0e..637ef53112b6 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -121,11 +121,10 @@ static void cia_disable_irq(unsigned int irq) cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA)); } -static struct irq_controller cia_irq_controller = { +static struct irq_chip cia_irq_chip = { .name = "cia", - .lock = __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock), - .enable = cia_enable_irq, - .disable = cia_disable_irq, + .irq_enable = cia_enable_irq, + .irq_disable = cia_disable_irq, }; /* @@ -158,23 +157,22 @@ static void auto_disable_irq(unsigned int irq) } } -static struct irq_controller auto_irq_controller = { +static struct irq_chip auto_irq_chip = { .name = "auto", - .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock), - .enable = auto_enable_irq, - .disable = auto_disable_irq, + .irq_enable = auto_enable_irq, + .irq_disable = auto_disable_irq, }; void __init cia_init_IRQ(struct ciabase *base) { - m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS); + m68k_setup_irq_chip(&cia_irq_chip, base->cia_irq, CIA_IRQS); /* clear any pending interrupt and turn off all interrupts */ cia_set_irq(base, CIA_ICR_ALL); cia_able_irq(base, CIA_ICR_ALL); /* override auto int and install CIA handler */ - m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1); + m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); m68k_irq_startup(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 5d47f3aa3810..d6e8f33466be 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -12,7 +12,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(picb)=0x20; } -int apollo_irq_startup(unsigned int irq) +unsigned int apollo_irq_startup(unsigned int irq) { if (irq < 8) *(volatile unsigned char *)(pica+1) &= ~(1 << irq); @@ -29,16 +29,15 @@ void apollo_irq_shutdown(unsigned int irq) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } -static struct irq_controller apollo_irq_controller = { +static struct irq_chip apollo_irq_chip = { .name = "apollo", - .lock = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock), - .startup = apollo_irq_startup, - .shutdown = apollo_irq_shutdown, + .irq_startup = apollo_irq_startup, + .irq_shutdown = apollo_irq_shutdown, }; void __init dn_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16); + m68k_setup_irq_chip(&apollo_irq_chip, IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 26a804e67bce..ac0ebdf6ca72 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -320,7 +320,7 @@ extern void atari_microwire_cmd(int cmd); extern int atari_SCC_reset_done; -static int atari_startup_irq(unsigned int irq) +static unsigned int atari_startup_irq(unsigned int irq) { m68k_irq_startup(irq); atari_turnon_irq(irq); @@ -338,13 +338,12 @@ static void atari_shutdown_irq(unsigned int irq) vectors[VEC_INT4] = falcon_hblhandler; } -static struct irq_controller atari_irq_controller = { +static struct irq_chip atari_irq_chip = { .name = "atari", - .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock), - .startup = atari_startup_irq, - .shutdown = atari_shutdown_irq, - .enable = atari_enable_irq, - .disable = atari_disable_irq, + .irq_startup = atari_startup_irq, + .irq_shutdown = atari_shutdown_irq, + .irq_enable = atari_enable_irq, + .irq_disable = atari_disable_irq, }; /* @@ -361,7 +360,7 @@ static struct irq_controller atari_irq_controller = { void __init atari_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_irq_chip(&atari_irq_chip, 1, NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 69ed0d74d532..d8c6f68b7a78 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -93,16 +93,15 @@ struct irq_handler { const char *devname; }; -struct irq_controller { +struct irq_chip { const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); + unsigned int (*irq_startup)(unsigned int irq); + void (*irq_shutdown)(unsigned int irq); + void (*irq_enable)(unsigned int irq); + void (*irq_disable)(unsigned int irq); }; -extern int m68k_irq_startup(unsigned int); +extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* @@ -113,7 +112,7 @@ extern irq_node_t *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); +extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); asmlinkage void m68k_handle_int(unsigned int); asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 761ee0440c99..f43ad7b93ab6 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -52,23 +52,21 @@ extern u16 user_irqvec_fixup[]; /* table for system interrupt handlers */ static struct irq_node *irq_list[NR_IRQS]; -static struct irq_controller *irq_controller[NR_IRQS]; +static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; static int m68k_first_user_vec; -static struct irq_controller auto_irq_controller = { +static struct irq_chip auto_irq_chip = { .name = "auto", - .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, }; -static struct irq_controller user_irq_controller = { +static struct irq_chip user_irq_chip = { .name = "user", - .lock = __SPIN_LOCK_UNLOCKED(user_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, }; #define NUM_IRQ_NODES 100 @@ -96,7 +94,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_controller[i] = &auto_irq_controller; + irq_chip[i] = &auto_irq_chip; mach_init_IRQ(); } @@ -136,7 +134,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) - irq_controller[IRQ_USER + i] = &user_irq_controller; + irq_chip[IRQ_USER + i] = &user_irq_chip; *user_irqvec_fixup = vec - IRQ_USER; if (handler) *user_irqhandler_fixup = (u32)handler; @@ -144,7 +142,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, } /** - * m68k_setup_irq_controller + * m68k_setup_irq_chip * @contr: irq controller which controls specified irq * @irq: first irq to be managed by the controller * @@ -153,13 +151,13 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, * be changed as well, but the controller probably should use m68k_irq_startup/ * m68k_irq_shutdown. */ -void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq, +void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, unsigned int cnt) { int i; for (i = 0; i < cnt; i++) - irq_controller[irq + i] = contr; + irq_chip[irq + i] = contr; } irq_node_t *new_irq_node(void) @@ -180,23 +178,23 @@ irq_node_t *new_irq_node(void) int setup_irq(unsigned int irq, struct irq_node *node) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node **prev; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d from %s\n", __func__, irq, node->devname); return -ENXIO; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); prev = irq_list + irq; if (*prev) { /* Can't share interrupts unless both agree to */ if (!((*prev)->flags & node->flags & IRQF_SHARED)) { - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); return -EBUSY; } while (*prev) @@ -204,15 +202,15 @@ int setup_irq(unsigned int irq, struct irq_node *node) } if (!irq_list[irq]) { - if (contr->startup) - contr->startup(irq); + if (contr->irq_startup) + contr->irq_startup(irq); else - contr->enable(irq); + contr->irq_enable(irq); } node->next = NULL; *prev = node; - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); return 0; } @@ -244,16 +242,16 @@ EXPORT_SYMBOL(request_irq); void free_irq(unsigned int irq, void *dev_id) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node **p, *node; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); p = irq_list + irq; while ((node = *p)) { @@ -270,58 +268,58 @@ void free_irq(unsigned int irq, void *dev_id) __func__, irq); if (!irq_list[irq]) { - if (contr->shutdown) - contr->shutdown(irq); + if (contr->irq_shutdown) + contr->irq_shutdown(irq); else - contr->disable(irq); + contr->irq_disable(irq); } - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(free_irq); void enable_irq(unsigned int irq) { - struct irq_controller *contr; + struct irq_chip *contr; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); if (irq_depth[irq]) { if (!--irq_depth[irq]) { - if (contr->enable) - contr->enable(irq); + if (contr->irq_enable) + contr->irq_enable(irq); } } else WARN_ON(1); - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(enable_irq); void disable_irq(unsigned int irq) { - struct irq_controller *contr; + struct irq_chip *contr; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); if (!irq_depth[irq]++) { - if (contr->disable) - contr->disable(irq); + if (contr->irq_disable) + contr->irq_disable(irq); } - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(disable_irq); @@ -330,7 +328,7 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); -int m68k_irq_startup(unsigned int irq) +unsigned int m68k_irq_startup(unsigned int irq) { if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = auto_inthandler; @@ -413,13 +411,13 @@ asmlinkage void handle_badint(struct pt_regs *regs) int show_interrupts(struct seq_file *p, void *v) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node *node; int i = *(loff_t *) v; /* autovector interrupts */ if (irq_list[i]) { - contr = irq_controller[i]; + contr = irq_chip[i]; node = irq_list[i]; seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname); while ((node = node->next)) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index f92190c159b4..ffa1b3f7e2b7 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -193,11 +193,10 @@ irqreturn_t mac_debug_handler(int, void *); void mac_enable_irq(unsigned int irq); void mac_disable_irq(unsigned int irq); -static struct irq_controller mac_irq_controller = { +static struct irq_chip mac_irq_chip = { .name = "mac", - .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock), - .enable = mac_enable_irq, - .disable = mac_disable_irq, + .irq_enable = mac_enable_irq, + .irq_disable = mac_disable_irq, }; void __init mac_init_IRQ(void) @@ -205,7 +204,7 @@ void __init mac_init_IRQ(void) #ifdef DEBUG_MACINTS printk("mac_init_IRQ(): Setting things up...\n"); #endif - m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER, + m68k_setup_irq_chip(&mac_irq_chip, IRQ_USER, NUM_MAC_SOURCES - IRQ_USER); /* Make sure the SONIC interrupt is cleared or things get ugly */ #ifdef SHUTUP_SONIC diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index 9f0e3d59bf92..fa05a03f8dfe 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -41,14 +41,14 @@ static void q40_disable_irq(unsigned int); unsigned short q40_ablecount[35]; unsigned short q40_state[35]; -static int q40_irq_startup(unsigned int irq) +static unsigned int q40_irq_startup(unsigned int irq) { /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: case 11: case 12: case 13: printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq); - return -ENXIO; + /* FIXME return -ENXIO; */ } return 0; } @@ -57,13 +57,12 @@ static void q40_irq_shutdown(unsigned int irq) { } -static struct irq_controller q40_irq_controller = { +static struct irq_chip q40_irq_chip = { .name = "q40", - .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock), - .startup = q40_irq_startup, - .shutdown = q40_irq_shutdown, - .enable = q40_enable_irq, - .disable = q40_disable_irq, + .irq_startup = q40_irq_startup, + .irq_shutdown = q40_irq_shutdown, + .irq_enable = q40_enable_irq, + .irq_disable = q40_disable_irq, }; /* @@ -81,7 +80,7 @@ static int disabled; void __init q40_init_IRQ(void) { - m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX); + m68k_setup_irq_chip(&q40_irq_chip, 1, Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 6464ad3ae3e6..97fa9edc5a9d 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -86,13 +86,12 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) __m68k_handle_int(irq, fp); } -static struct irq_controller sun3_irq_controller = { +static struct irq_chip sun3_irq_chip = { .name = "sun3", - .lock = __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, - .enable = sun3_enable_irq, - .disable = sun3_disable_irq, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, + .irq_enable = sun3_enable_irq, + .irq_disable = sun3_disable_irq, }; void __init sun3_init_IRQ(void) @@ -100,7 +99,7 @@ void __init sun3_init_IRQ(void) *sun3_intreg = 1; m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7); + m68k_setup_irq_chip(&sun3_irq_chip, IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) -- cgit v1.2.3 From 0dde595be678c06e7de27c98f45403088f1b126a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 21:39:08 +0200 Subject: m68k/irq: Kill irq_node_t typedef, always use struct irq_node Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/include/asm/irq.h | 8 ++++---- arch/m68k/kernel/ints.c | 6 +++--- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d8c6f68b7a78..bfc521f35bdf 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -75,13 +75,13 @@ struct pt_regs; * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). */ -typedef struct irq_node { +struct irq_node { irqreturn_t (*handler)(int, void *); void *dev_id; struct irq_node *next; unsigned long flags; const char *devname; -} irq_node_t; +}; /* * This structure has only 4 elements for speed reasons @@ -105,9 +105,9 @@ extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* - * This function returns a new irq_node_t + * This function returns a new struct irq_node */ -extern irq_node_t *new_irq_node(void); +extern struct irq_node *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index f43ad7b93ab6..9de8eb4eaefb 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -70,7 +70,7 @@ static struct irq_chip user_irq_chip = { }; #define NUM_IRQ_NODES 100 -static irq_node_t nodes[NUM_IRQ_NODES]; +static struct irq_node nodes[NUM_IRQ_NODES]; /* * void init_IRQ(void) @@ -160,9 +160,9 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, irq_chip[irq + i] = contr; } -irq_node_t *new_irq_node(void) +struct irq_node *new_irq_node(void) { - irq_node_t *node; + struct irq_node *node; short i; for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { -- cgit v1.2.3 From 6549d537922da6a6893e9bc1be9c2b89db663719 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 21:59:23 +0200 Subject: m68k/irq: Rename irq_node to irq_data Make it more similar to the genirq version: - Add an irq field Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/include/asm/irq.h | 9 +++++---- arch/m68k/kernel/ints.c | 21 +++++++++++---------- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index bfc521f35bdf..3cb037c36d10 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -75,10 +75,11 @@ struct pt_regs; * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). */ -struct irq_node { +struct irq_data { + unsigned int irq; irqreturn_t (*handler)(int, void *); void *dev_id; - struct irq_node *next; + struct irq_data *next; unsigned long flags; const char *devname; }; @@ -105,9 +106,9 @@ extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* - * This function returns a new struct irq_node + * This function returns a new struct irq_data */ -extern struct irq_node *new_irq_node(void); +extern struct irq_data *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 9de8eb4eaefb..88779320d406 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -51,7 +51,7 @@ extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; /* table for system interrupt handlers */ -static struct irq_node *irq_list[NR_IRQS]; +static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; @@ -70,7 +70,7 @@ static struct irq_chip user_irq_chip = { }; #define NUM_IRQ_NODES 100 -static struct irq_node nodes[NUM_IRQ_NODES]; +static struct irq_data nodes[NUM_IRQ_NODES]; /* * void init_IRQ(void) @@ -160,9 +160,9 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, irq_chip[irq + i] = contr; } -struct irq_node *new_irq_node(void) +struct irq_data *new_irq_node(void) { - struct irq_node *node; + struct irq_data *node; short i; for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { @@ -176,10 +176,10 @@ struct irq_node *new_irq_node(void) return NULL; } -int setup_irq(unsigned int irq, struct irq_node *node) +int setup_irq(unsigned int irq, struct irq_data *node) { struct irq_chip *contr; - struct irq_node **prev; + struct irq_data **prev; unsigned long flags; if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { @@ -219,13 +219,14 @@ int request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *devname, void *dev_id) { - struct irq_node *node; + struct irq_data *node; int res; node = new_irq_node(); if (!node) return -ENOMEM; + node->irq = irq; node->handler = handler; node->flags = flags; node->dev_id = dev_id; @@ -243,7 +244,7 @@ EXPORT_SYMBOL(request_irq); void free_irq(unsigned int irq, void *dev_id) { struct irq_chip *contr; - struct irq_node **p, *node; + struct irq_data **p, *node; unsigned long flags; if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { @@ -386,7 +387,7 @@ EXPORT_SYMBOL(irq_canonicalize); asmlinkage void m68k_handle_int(unsigned int irq) { - struct irq_node *node; + struct irq_data *node; kstat_cpu(0).irqs[irq]++; node = irq_list[irq]; do { @@ -412,7 +413,7 @@ asmlinkage void handle_badint(struct pt_regs *regs) int show_interrupts(struct seq_file *p, void *v) { struct irq_chip *contr; - struct irq_node *node; + struct irq_data *node; int i = *(loff_t *) v; /* autovector interrupts */ -- cgit v1.2.3 From e8abf5e73cdb6c034d35ccba1f63a4801cd3dec5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 22:53:04 +0200 Subject: m68k/irq: Switch irq_chip methods to "struct irq_data *data" Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/amiga/amiints.c | 16 ++++++++-------- arch/m68k/amiga/cia.c | 25 ++++++++++++++----------- arch/m68k/apollo/dn_ints.c | 8 ++++++-- arch/m68k/atari/ataints.c | 30 ++++++++++++++++++++++-------- arch/m68k/include/asm/irq.h | 13 +++++++------ arch/m68k/kernel/ints.c | 23 +++++++++++++++-------- arch/m68k/mac/macints.c | 14 ++++++++++++-- arch/m68k/q40/q40ints.c | 28 +++++++++++++++++----------- arch/m68k/sun3/sun3ints.c | 14 ++++++++++++-- 9 files changed, 113 insertions(+), 58 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 320c5d048dc7..09a695babfe9 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -45,8 +45,8 @@ #include #include -static void amiga_enable_irq(unsigned int irq); -static void amiga_disable_irq(unsigned int irq); +static void amiga_irq_enable(struct irq_data *data); +static void amiga_irq_disable(struct irq_data *data); static irqreturn_t ami_int1(int irq, void *dev_id); static irqreturn_t ami_int3(int irq, void *dev_id); static irqreturn_t ami_int4(int irq, void *dev_id); @@ -54,8 +54,8 @@ static irqreturn_t ami_int5(int irq, void *dev_id); static struct irq_chip amiga_irq_chip = { .name = "amiga", - .irq_enable = amiga_enable_irq, - .irq_disable = amiga_disable_irq, + .irq_enable = amiga_irq_enable, + .irq_disable = amiga_irq_disable, }; /* @@ -102,14 +102,14 @@ void __init amiga_init_IRQ(void) * internal data, that may not be changed by the interrupt at the same time. */ -static void amiga_enable_irq(unsigned int irq) +static void amiga_irq_enable(struct irq_data *data) { - amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER)); + amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER)); } -static void amiga_disable_irq(unsigned int irq) +static void amiga_irq_disable(struct irq_data *data) { - amiga_custom.intena = 1 << (irq - IRQ_USER); + amiga_custom.intena = 1 << (data->irq - IRQ_USER); } /* diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index 637ef53112b6..b04b453718d9 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -98,8 +98,9 @@ static irqreturn_t cia_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static void cia_enable_irq(unsigned int irq) +static void cia_irq_enable(struct irq_data *data) { + unsigned int irq = data->irq; unsigned char mask; if (irq >= IRQ_AMIGA_CIAB) { @@ -113,8 +114,10 @@ static void cia_enable_irq(unsigned int irq) } } -static void cia_disable_irq(unsigned int irq) +static void cia_irq_disable(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq >= IRQ_AMIGA_CIAB) cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB)); else @@ -123,8 +126,8 @@ static void cia_disable_irq(unsigned int irq) static struct irq_chip cia_irq_chip = { .name = "cia", - .irq_enable = cia_enable_irq, - .irq_disable = cia_disable_irq, + .irq_enable = cia_irq_enable, + .irq_disable = cia_irq_disable, }; /* @@ -133,9 +136,9 @@ static struct irq_chip cia_irq_chip = { * into this chain. */ -static void auto_enable_irq(unsigned int irq) +static void auto_irq_enable(struct irq_data *data) { - switch (irq) { + switch (data->irq) { case IRQ_AUTO_2: amiga_custom.intena = IF_SETCLR | IF_PORTS; break; @@ -145,9 +148,9 @@ static void auto_enable_irq(unsigned int irq) } } -static void auto_disable_irq(unsigned int irq) +static void auto_irq_disable(struct irq_data *data) { - switch (irq) { + switch (data->irq) { case IRQ_AUTO_2: amiga_custom.intena = IF_PORTS; break; @@ -159,8 +162,8 @@ static void auto_disable_irq(unsigned int irq) static struct irq_chip auto_irq_chip = { .name = "auto", - .irq_enable = auto_enable_irq, - .irq_disable = auto_disable_irq, + .irq_enable = auto_irq_enable, + .irq_disable = auto_irq_disable, }; void __init cia_init_IRQ(struct ciabase *base) @@ -173,7 +176,7 @@ void __init cia_init_IRQ(struct ciabase *base) /* override auto int and install CIA handler */ m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); - m68k_irq_startup(base->handler_irq); + m68k_irq_startup_irq(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) pr_err("Couldn't register %s interrupt\n", base->name); diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index d6e8f33466be..2bdab498b6c1 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -12,8 +12,10 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(picb)=0x20; } -unsigned int apollo_irq_startup(unsigned int irq) +unsigned int apollo_irq_startup(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq < 8) *(volatile unsigned char *)(pica+1) &= ~(1 << irq); else @@ -21,8 +23,10 @@ unsigned int apollo_irq_startup(unsigned int irq) return 0; } -void apollo_irq_shutdown(unsigned int irq) +void apollo_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq < 8) *(volatile unsigned char *)(pica+1) |= (1 << irq); else diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index ac0ebdf6ca72..7f4e5a9b77c5 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -320,30 +320,44 @@ extern void atari_microwire_cmd(int cmd); extern int atari_SCC_reset_done; -static unsigned int atari_startup_irq(unsigned int irq) +static unsigned int atari_irq_startup(struct irq_data *data) { - m68k_irq_startup(irq); + unsigned int irq = data->irq; + + m68k_irq_startup(data); atari_turnon_irq(irq); atari_enable_irq(irq); return 0; } -static void atari_shutdown_irq(unsigned int irq) +static void atari_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + atari_disable_irq(irq); atari_turnoff_irq(irq); - m68k_irq_shutdown(irq); + m68k_irq_shutdown(data); if (irq == IRQ_AUTO_4) vectors[VEC_INT4] = falcon_hblhandler; } +static void atari_irq_enable(struct irq_data *data) +{ + atari_enable_irq(data->irq); +} + +static void atari_irq_disable(struct irq_data *data) +{ + atari_disable_irq(data->irq); +} + static struct irq_chip atari_irq_chip = { .name = "atari", - .irq_startup = atari_startup_irq, - .irq_shutdown = atari_shutdown_irq, - .irq_enable = atari_enable_irq, - .irq_disable = atari_disable_irq, + .irq_startup = atari_irq_startup, + .irq_shutdown = atari_irq_shutdown, + .irq_enable = atari_irq_enable, + .irq_disable = atari_irq_disable, }; /* diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 3cb037c36d10..423f064955f2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -96,14 +96,15 @@ struct irq_handler { struct irq_chip { const char *name; - unsigned int (*irq_startup)(unsigned int irq); - void (*irq_shutdown)(unsigned int irq); - void (*irq_enable)(unsigned int irq); - void (*irq_disable)(unsigned int irq); + unsigned int (*irq_startup)(struct irq_data *data); + void (*irq_shutdown)(struct irq_data *data); + void (*irq_enable)(struct irq_data *data); + void (*irq_disable)(struct irq_data *data); }; -extern unsigned int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); +extern unsigned int m68k_irq_startup(struct irq_data *data); +extern unsigned int m68k_irq_startup_irq(unsigned int irq); +extern void m68k_irq_shutdown(struct irq_data *data); /* * This function returns a new struct irq_data diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 88779320d406..404d832f5d35 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -203,9 +203,9 @@ int setup_irq(unsigned int irq, struct irq_data *node) if (!irq_list[irq]) { if (contr->irq_startup) - contr->irq_startup(irq); + contr->irq_startup(node); else - contr->irq_enable(irq); + contr->irq_enable(node); } node->next = NULL; *prev = node; @@ -270,9 +270,9 @@ void free_irq(unsigned int irq, void *dev_id) if (!irq_list[irq]) { if (contr->irq_shutdown) - contr->irq_shutdown(irq); + contr->irq_shutdown(node); else - contr->irq_disable(irq); + contr->irq_disable(node); } local_irq_restore(flags); @@ -295,7 +295,7 @@ void enable_irq(unsigned int irq) if (irq_depth[irq]) { if (!--irq_depth[irq]) { if (contr->irq_enable) - contr->irq_enable(irq); + contr->irq_enable(irq_list[irq]); } } else WARN_ON(1); @@ -318,7 +318,7 @@ void disable_irq(unsigned int irq) local_irq_save(flags); if (!irq_depth[irq]++) { if (contr->irq_disable) - contr->irq_disable(irq); + contr->irq_disable(irq_list[irq]); } local_irq_restore(flags); } @@ -329,7 +329,7 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); -unsigned int m68k_irq_startup(unsigned int irq) +unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = auto_inthandler; @@ -338,8 +338,15 @@ unsigned int m68k_irq_startup(unsigned int irq) return 0; } -void m68k_irq_shutdown(unsigned int irq) +unsigned int m68k_irq_startup(struct irq_data *data) { + return m68k_irq_startup_irq(data->irq); +} + +void m68k_irq_shutdown(struct irq_data *data) +{ + unsigned int irq = data->irq; + if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = bad_inthandler; else diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index ffa1b3f7e2b7..3cee6d29cc5d 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -193,10 +193,20 @@ irqreturn_t mac_debug_handler(int, void *); void mac_enable_irq(unsigned int irq); void mac_disable_irq(unsigned int irq); +static void mac_irq_enable(struct irq_data *data) +{ + mac_enable_irq(data->irq); +} + +static void mac_irq_disable(struct irq_data *data) +{ + mac_disable_irq(data->irq); +} + static struct irq_chip mac_irq_chip = { .name = "mac", - .irq_enable = mac_enable_irq, - .irq_disable = mac_disable_irq, + .irq_enable = mac_irq_enable, + .irq_disable = mac_irq_disable, }; void __init mac_init_IRQ(void) diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index fa05a03f8dfe..cb245f972e1a 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -35,14 +35,16 @@ */ static void q40_irq_handler(unsigned int, struct pt_regs *fp); -static void q40_enable_irq(unsigned int); -static void q40_disable_irq(unsigned int); +static void q40_irq_enable(struct irq_data *data); +static void q40_irq_disable(struct irq_data *data); unsigned short q40_ablecount[35]; unsigned short q40_state[35]; -static unsigned int q40_irq_startup(unsigned int irq) +static unsigned int q40_irq_startup(struct irq_data *data) { + unsigned int irq = data->irq; + /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: @@ -53,7 +55,7 @@ static unsigned int q40_irq_startup(unsigned int irq) return 0; } -static void q40_irq_shutdown(unsigned int irq) +static void q40_irq_shutdown(struct irq_data *data) { } @@ -61,8 +63,8 @@ static struct irq_chip q40_irq_chip = { .name = "q40", .irq_startup = q40_irq_startup, .irq_shutdown = q40_irq_shutdown, - .irq_enable = q40_enable_irq, - .irq_disable = q40_disable_irq, + .irq_enable = q40_irq_enable, + .irq_disable = q40_irq_disable, }; /* @@ -85,8 +87,8 @@ void __init q40_init_IRQ(void) /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); - m68k_irq_startup(IRQ_AUTO_2); - m68k_irq_startup(IRQ_AUTO_4); + m68k_irq_startup_irq(IRQ_AUTO_2); + m68k_irq_startup_irq(IRQ_AUTO_4); /* now enable some ints.. */ master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */ @@ -292,20 +294,24 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) return; } -void q40_enable_irq(unsigned int irq) +void q40_irq_enable(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq >= 5 && irq <= 15) { mext_disabled--; if (mext_disabled > 0) - printk("q40_enable_irq : nested disable/enable\n"); + printk("q40_irq_enable : nested disable/enable\n"); if (mext_disabled == 0) master_outb(1, EXT_ENABLE_REG); } } -void q40_disable_irq(unsigned int irq) +void q40_irq_disable(struct irq_data *data) { + unsigned int irq = data->irq; + /* disable ISA iqs : only do something if the driver has been * verified to be Q40 "compatible" - right now IDE, NE2K * Any driver should not attempt to sleep across disable_irq !! diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 97fa9edc5a9d..5d45e0065d2e 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -86,12 +86,22 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) __m68k_handle_int(irq, fp); } +static void sun3_irq_enable(struct irq_data *data) +{ + sun3_enable_irq(data->irq); +}; + +static void sun3_irq_disable(struct irq_data *data) +{ + sun3_disable_irq(data->irq); +}; + static struct irq_chip sun3_irq_chip = { .name = "sun3", .irq_startup = m68k_irq_startup, .irq_shutdown = m68k_irq_shutdown, - .irq_enable = sun3_enable_irq, - .irq_disable = sun3_disable_irq, + .irq_enable = sun3_irq_enable, + .irq_disable = sun3_irq_disable, }; void __init sun3_init_IRQ(void) -- cgit v1.2.3 From 13d6da35813babaa1bc8c6799b2666191911100e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Apr 2011 20:10:53 +0200 Subject: m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it static It has nothing to do with the standard one in Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/kernel/ints.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 404d832f5d35..e68a3bd5de6e 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -176,7 +176,7 @@ struct irq_data *new_irq_node(void) return NULL; } -int setup_irq(unsigned int irq, struct irq_data *node) +static int m68k_setup_irq(unsigned int irq, struct irq_data *node) { struct irq_chip *contr; struct irq_data **prev; @@ -232,7 +232,7 @@ int request_irq(unsigned int irq, node->dev_id = dev_id; node->devname = devname; - res = setup_irq(irq, node); + res = m68k_setup_irq(irq, node); if (res) node->handler = NULL; -- cgit v1.2.3 From 40a72c8f711bdf8ae3e4f945261ced5432dcac4d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 May 2011 22:33:41 +0200 Subject: m68k/irq: Extract irq_set_chip() Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/kernel/ints.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index e68a3bd5de6e..4f9868e160bd 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -55,6 +55,12 @@ static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; +static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) +{ + irq_chip[irq] = chip; + return 0; +} + static int m68k_first_user_vec; static struct irq_chip auto_irq_chip = { @@ -94,7 +100,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_chip[i] = &auto_irq_chip; + irq_set_chip(i, &auto_irq_chip); mach_init_IRQ(); } @@ -134,7 +140,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) - irq_chip[IRQ_USER + i] = &user_irq_chip; + irq_set_chip(IRQ_USER + i, &user_irq_chip); *user_irqvec_fixup = vec - IRQ_USER; if (handler) *user_irqhandler_fixup = (u32)handler; @@ -157,7 +163,7 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, int i; for (i = 0; i < cnt; i++) - irq_chip[irq + i] = contr; + irq_set_chip(irq + i, contr); } struct irq_data *new_irq_node(void) -- cgit v1.2.3 From edb347256c44366888debb4f9e8477ac700a9026 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Jun 2011 11:15:21 +0200 Subject: m68k/irq: Add m68k_setup_irq_controller() This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 3 ++- arch/m68k/amiga/cia.c | 6 ++++-- arch/m68k/apollo/dn_ints.c | 3 ++- arch/m68k/atari/ataints.c | 3 ++- arch/m68k/include/asm/irq.h | 2 ++ arch/m68k/mac/macints.c | 2 +- arch/m68k/q40/q40ints.c | 3 ++- arch/m68k/sun3/sun3ints.c | 3 ++- 8 files changed, 17 insertions(+), 8 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 09a695babfe9..8af5ea3eea67 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -80,7 +80,8 @@ void __init amiga_init_IRQ(void) if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) pr_err("Couldn't register int%d\n", 5); - m68k_setup_irq_chip(&amiga_irq_chip, IRQ_USER, AMI_STD_IRQS); + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index b04b453718d9..84663ae824ef 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -168,14 +168,16 @@ static struct irq_chip auto_irq_chip = { void __init cia_init_IRQ(struct ciabase *base) { - m68k_setup_irq_chip(&cia_irq_chip, base->cia_irq, CIA_IRQS); + m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq, + base->cia_irq, CIA_IRQS); /* clear any pending interrupt and turn off all interrupts */ cia_set_irq(base, CIA_ICR_ALL); cia_able_irq(base, CIA_ICR_ALL); /* override auto int and install CIA handler */ - m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); + m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq, + base->handler_irq, 1); m68k_irq_startup_irq(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 2bdab498b6c1..bdc44282fdba 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -43,5 +43,6 @@ static struct irq_chip apollo_irq_chip = { void __init dn_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_chip(&apollo_irq_chip, IRQ_APOLLO, 16); + m68k_setup_irq_controller(&apollo_irq_chip, handle_simple_irq, + IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 7f4e5a9b77c5..6149ff994641 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -374,7 +374,8 @@ static struct irq_chip atari_irq_chip = { void __init atari_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_chip(&atari_irq_chip, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, + NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 423f064955f2..d0b7efd1f1e2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -115,6 +115,8 @@ extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); +#define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ + m68k_setup_irq_chip((chip), (irq), (cnt)) asmlinkage void m68k_handle_int(unsigned int); asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 3cee6d29cc5d..98497d288a9b 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -214,7 +214,7 @@ void __init mac_init_IRQ(void) #ifdef DEBUG_MACINTS printk("mac_init_IRQ(): Setting things up...\n"); #endif - m68k_setup_irq_chip(&mac_irq_chip, IRQ_USER, + m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER, NUM_MAC_SOURCES - IRQ_USER); /* Make sure the SONIC interrupt is cleared or things get ugly */ #ifdef SHUTUP_SONIC diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index cb245f972e1a..a8a5ce8b18fc 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -82,7 +82,8 @@ static int disabled; void __init q40_init_IRQ(void) { - m68k_setup_irq_chip(&q40_irq_chip, 1, Q40_IRQ_MAX); + m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1, + Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 5d45e0065d2e..20461278e535 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -109,7 +109,8 @@ void __init sun3_init_IRQ(void) *sun3_intreg = 1; m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_chip(&sun3_irq_chip, IRQ_AUTO_1, 7); + m68k_setup_irq_controller(&sun3_irq_chip, handle_simple_irq, + IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) -- cgit v1.2.3 From 1425df87c25b15400c9f26d57821bcfe01286b2a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 1 Jul 2011 20:39:19 +0200 Subject: m68k/irq: Rename {,__}m68k_handle_int() - Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 24 ++++++++++++------------ arch/m68k/amiga/cia.c | 2 +- arch/m68k/apollo/dn_ints.c | 2 +- arch/m68k/include/asm/irq.h | 4 ++-- arch/m68k/kernel/entry_mm.S | 4 ++-- arch/m68k/kernel/ints.c | 10 +++++----- arch/m68k/mac/baboon.c | 2 +- arch/m68k/mac/oss.c | 4 ++-- arch/m68k/mac/psc.c | 2 +- arch/m68k/mac/via.c | 6 +++--- arch/m68k/q40/q40ints.c | 8 ++++---- arch/m68k/sun3/sun3ints.c | 2 +- 12 files changed, 35 insertions(+), 35 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 8af5ea3eea67..0daa7fce9df1 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -124,19 +124,19 @@ static irqreturn_t ami_int1(int irq, void *dev_id) /* if serial transmit buffer empty, interrupt */ if (ints & IF_TBE) { amiga_custom.intreq = IF_TBE; - m68k_handle_int(IRQ_AMIGA_TBE); + generic_handle_irq(IRQ_AMIGA_TBE); } /* if floppy disk transfer complete, interrupt */ if (ints & IF_DSKBLK) { amiga_custom.intreq = IF_DSKBLK; - m68k_handle_int(IRQ_AMIGA_DSKBLK); + generic_handle_irq(IRQ_AMIGA_DSKBLK); } /* if software interrupt set, interrupt */ if (ints & IF_SOFT) { amiga_custom.intreq = IF_SOFT; - m68k_handle_int(IRQ_AMIGA_SOFT); + generic_handle_irq(IRQ_AMIGA_SOFT); } return IRQ_HANDLED; } @@ -148,19 +148,19 @@ static irqreturn_t ami_int3(int irq, void *dev_id) /* if a blitter interrupt */ if (ints & IF_BLIT) { amiga_custom.intreq = IF_BLIT; - m68k_handle_int(IRQ_AMIGA_BLIT); + generic_handle_irq(IRQ_AMIGA_BLIT); } /* if a copper interrupt */ if (ints & IF_COPER) { amiga_custom.intreq = IF_COPER; - m68k_handle_int(IRQ_AMIGA_COPPER); + generic_handle_irq(IRQ_AMIGA_COPPER); } /* if a vertical blank interrupt */ if (ints & IF_VERTB) { amiga_custom.intreq = IF_VERTB; - m68k_handle_int(IRQ_AMIGA_VERTB); + generic_handle_irq(IRQ_AMIGA_VERTB); } return IRQ_HANDLED; } @@ -172,25 +172,25 @@ static irqreturn_t ami_int4(int irq, void *dev_id) /* if audio 0 interrupt */ if (ints & IF_AUD0) { amiga_custom.intreq = IF_AUD0; - m68k_handle_int(IRQ_AMIGA_AUD0); + generic_handle_irq(IRQ_AMIGA_AUD0); } /* if audio 1 interrupt */ if (ints & IF_AUD1) { amiga_custom.intreq = IF_AUD1; - m68k_handle_int(IRQ_AMIGA_AUD1); + generic_handle_irq(IRQ_AMIGA_AUD1); } /* if audio 2 interrupt */ if (ints & IF_AUD2) { amiga_custom.intreq = IF_AUD2; - m68k_handle_int(IRQ_AMIGA_AUD2); + generic_handle_irq(IRQ_AMIGA_AUD2); } /* if audio 3 interrupt */ if (ints & IF_AUD3) { amiga_custom.intreq = IF_AUD3; - m68k_handle_int(IRQ_AMIGA_AUD3); + generic_handle_irq(IRQ_AMIGA_AUD3); } return IRQ_HANDLED; } @@ -202,13 +202,13 @@ static irqreturn_t ami_int5(int irq, void *dev_id) /* if serial receive buffer full interrupt */ if (ints & IF_RBF) { /* acknowledge of IF_RBF must be done by the serial interrupt */ - m68k_handle_int(IRQ_AMIGA_RBF); + generic_handle_irq(IRQ_AMIGA_RBF); } /* if a disk sync interrupt */ if (ints & IF_DSKSYN) { amiga_custom.intreq = IF_DSKSYN; - m68k_handle_int(IRQ_AMIGA_DSKSYN); + generic_handle_irq(IRQ_AMIGA_DSKSYN); } return IRQ_HANDLED; } diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index 84663ae824ef..18c0e29976e3 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -93,7 +93,7 @@ static irqreturn_t cia_handler(int irq, void *dev_id) amiga_custom.intreq = base->int_mask; for (; ints; mach_irq++, ints >>= 1) { if (ints & 1) - m68k_handle_int(mach_irq); + generic_handle_irq(mach_irq); } return IRQ_HANDLED; } diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index bdc44282fdba..4b764312aed0 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -6,7 +6,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) { - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); *(volatile unsigned char *)(pica)=0x20; *(volatile unsigned char *)(picb)=0x20; diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d0b7efd1f1e2..9a2bae8ef5b7 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -118,8 +118,8 @@ extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); #define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ m68k_setup_irq_chip((chip), (irq), (cnt)) -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); +extern void generic_handle_irq(unsigned int); +asmlinkage void do_IRQ(int irq, struct pt_regs *regs); #else #define irq_canonicalize(irq) (irq) diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index bd0ec05263b2..f5927d0927b4 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -207,7 +207,7 @@ ENTRY(auto_inthandler) movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack auto_irqhandler_fixup = . + 2 - jsr __m68k_handle_int | process the IRQ + jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack ret_from_interrupt: @@ -241,7 +241,7 @@ user_irqvec_fixup = . + 2 movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack user_irqhandler_fixup = . + 2 - jsr __m68k_handle_int | process the IRQ + jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 4f9868e160bd..15dbbe297334 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -110,7 +110,7 @@ void __init init_IRQ(void) * @handler: called from auto vector interrupts * * setup the handler to be called from auto vector interrupts instead of the - * standard __m68k_handle_int(), it will be called with irq numbers in the range + * standard do_IRQ(), it will be called with irq numbers in the range * from IRQ_AUTO_1 - IRQ_AUTO_7. */ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)) @@ -129,7 +129,7 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re * setup user vector interrupts, this includes activating the specified range * of interrupts, only then these interrupts can be requested (note: this is * different from auto vector interrupts). An optional handler can be installed - * to be called instead of the default __m68k_handle_int(), it will be called + * to be called instead of the default do_IRQ(), it will be called * with irq numbers starting from IRQ_USER. */ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, @@ -398,7 +398,7 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); -asmlinkage void m68k_handle_int(unsigned int irq) +void generic_handle_irq(unsigned int irq) { struct irq_data *node; kstat_cpu(0).irqs[irq]++; @@ -409,11 +409,11 @@ asmlinkage void m68k_handle_int(unsigned int irq) } while (node); } -asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs) +asmlinkage void do_IRQ(int irq, struct pt_regs *regs) { struct pt_regs *old_regs; old_regs = set_irq_regs(regs); - m68k_handle_int(irq); + generic_handle_irq(irq); set_irq_regs(old_regs); } diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index 2a96bebd8969..f264791b8694 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -72,7 +72,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) do { if (events & irq_bit) { baboon->mb_ifr &= ~irq_bit; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } irq_bit <<= 1; irq_num++; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index a9c0f5ab4cc0..ad512419affc 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -113,7 +113,7 @@ static irqreturn_t oss_irq(int irq, void *dev_id) /* FIXME: call sound handler */ } else if (events & OSS_IP_SCSI) { oss->irq_pending &= ~OSS_IP_SCSI; - m68k_handle_int(IRQ_MAC_SCSI); + generic_handle_irq(IRQ_MAC_SCSI); } else { /* FIXME: error check here? */ } @@ -148,7 +148,7 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) irq_bit >>= 1; if (events & irq_bit) { oss->irq_pending &= ~irq_bit; - m68k_handle_int(NUBUS_SOURCE_BASE + i); + generic_handle_irq(NUBUS_SOURCE_BASE + i); } } while(events & (irq_bit - 1)); return IRQ_HANDLED; diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index a4c3eb60706e..26c2b6595808 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -152,7 +152,7 @@ irqreturn_t psc_irq(int irq, void *dev_id) do { if (events & irq_bit) { psc_write_byte(pIFR, irq_bit); - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } irq_num++; irq_bit <<= 1; diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index e71166daec6a..067857046137 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -460,7 +460,7 @@ irqreturn_t via1_irq(int irq, void *dev_id) do { if (events & irq_bit) { via1[vIFR] = irq_bit; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } ++irq_num; irq_bit <<= 1; @@ -482,7 +482,7 @@ irqreturn_t via2_irq(int irq, void *dev_id) do { if (events & irq_bit) { via2[gIFR] = irq_bit | rbv_clear; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } ++irq_num; irq_bit <<= 1; @@ -514,7 +514,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) do { if (events & slot_bit) { events &= ~slot_bit; - m68k_handle_int(slot_irq); + generic_handle_irq(slot_irq); } --slot_irq; slot_bit >>= 1; diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index a8a5ce8b18fc..afe600c03659 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -220,11 +220,11 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) switch (irq) { case 4: case 6: - __m68k_handle_int(Q40_IRQ_SAMPLE, fp); + do_IRQ(Q40_IRQ_SAMPLE, fp); return; } if (mir & Q40_IRQ_FRAME_MASK) { - __m68k_handle_int(Q40_IRQ_FRAME, fp); + do_IRQ(Q40_IRQ_FRAME, fp); master_outb(-1, FRAME_CLEAR_REG); } if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) { @@ -259,7 +259,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) goto iirq; } q40_state[irq] |= IRQ_INPROGRESS; - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); q40_state[irq] &= ~IRQ_INPROGRESS; /* naively enable everything, if that fails than */ @@ -290,7 +290,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) mir = master_inb(IIRQ_REG); /* should test whether keyboard irq is really enabled, doing it in defhand */ if (mir & Q40_IRQ_KEYB_MASK) - __m68k_handle_int(Q40_IRQ_KEYBOARD, fp); + do_IRQ(Q40_IRQ_KEYBOARD, fp); return; } diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 20461278e535..20ffee7dc319 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -83,7 +83,7 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) { *sun3_intreg &= ~(1 << irq); - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); } static void sun3_irq_enable(struct irq_data *data) -- cgit v1.2.3 From 5a2394534b160ce18f9a705cf9de40e77648f8a2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 22:33:13 +0200 Subject: m68k/irq: Remove obsolete IRQ_FLG_* users The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 29 ----------------------------- arch/m68k/hp300/time.c | 2 +- arch/m68k/kernel/ints.c | 19 ------------------- arch/m68k/mac/iop.c | 10 ++++------ arch/m68k/mac/oss.c | 13 +++++-------- arch/m68k/mac/via.c | 22 ++++++++-------------- arch/m68k/mvme147/config.c | 3 +-- drivers/macintosh/via-macii.c | 2 +- drivers/macintosh/via-maciisi.c | 4 ++-- 9 files changed, 22 insertions(+), 82 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 0daa7fce9df1..e5f3033499e7 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -4,35 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. - * - * 11/07/96: rewritten interrupt handling, irq lists are exists now only for - * this sources where it makes sense (VERTB/PORTS/EXTER) and you must - * be careful that dev_id for this sources is unique since this the - * only possibility to distinguish between different handlers for - * free_irq. irq lists also have different irq flags: - * - IRQ_FLG_FAST: handler is inserted at top of list (after other - * fast handlers) - * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before - * they're executed irq level is set to the previous - * one, but handlers don't need to be reentrant, if - * reentrance occurred, slow handlers will be just - * called again. - * The whole interrupt handling for CIAs is moved to cia.c - * /Roman Zippel - * - * 07/08/99: rewamp of the interrupt handling - we now have two types of - * interrupts, normal and fast handlers, fast handlers being - * marked with IRQF_DISABLED and runs with all other interrupts - * disabled. Normal interrupts disable their own source but - * run with all other interrupt sources enabled. - * PORTS and EXTER interrupts are always shared even if the - * drivers do not explicitly mark this when calling - * request_irq which they really should do. - * This is similar to the way interrupts are handled on all - * other architectures and makes a ton of sense besides - * having the advantage of making it easier to share - * drivers. - * /Jes */ #include diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c index f6312c7d8727..c87fe69b0728 100644 --- a/arch/m68k/hp300/time.c +++ b/arch/m68k/hp300/time.c @@ -70,7 +70,7 @@ void __init hp300_sched_init(irq_handler_t vector) asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE)); - if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector)) + if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector)) pr_err("Couldn't register timer interrupt\n"); out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */ diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 15dbbe297334..f6a469865125 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -4,25 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. - * - * 07/03/96: Timer initialization, and thus mach_sched_init(), - * removed from request_irq() and moved to init_time(). - * We should therefore consider renaming our add_isr() and - * remove_isr() to request_irq() and free_irq() - * respectively, so they are compliant with the other - * architectures. /Jes - * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls. - * Removed irq list support, if any machine needs an irq server - * it must implement this itself (as it's already done), instead - * only default handler are used with mach_default_handler. - * request_irq got some flags different from other architectures: - * - IRQ_FLG_REPLACE : Replace an existing handler (the default one - * can be replaced without this flag) - * - IRQ_FLG_LOCK : handler can't be replaced - * There are other machine depending flags, see there - * If you want to replace a default handler you should know what - * you're doing, since it might handle different other irq sources - * which must be served /Roman Zippel */ #include diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index 1ad4e9d80eba..a5462cc0bfd6 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -305,15 +305,13 @@ void __init iop_register_interrupts(void) { if (iop_ism_present) { if (oss_present) { - if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, - IRQ_FLG_LOCK, "ISM IOP", - (void *) IOP_NUM_ISM)) + if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0, + "ISM IOP", (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); oss_irq_enable(IRQ_MAC_ADB); } else { - if (request_irq(IRQ_VIA2_0, iop_ism_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP", - (void *) IOP_NUM_ISM)) + if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP", + (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); } if (!iop_alive(iop_base[IOP_NUM_ISM])) { diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index ad512419affc..1eb60f071007 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -65,17 +65,14 @@ void __init oss_init(void) void __init oss_register_interrupts(void) { - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK, - "scsi", (void *) oss)) + if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK, - "nubus", (void *) oss)) + if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", + (void *)oss)) pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK, - "sound", (void *) oss)) + if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK, - "via1", (void *) via1)) + if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index 067857046137..af9ed33bec14 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -281,7 +281,7 @@ void __init via_init_clock(irq_handler_t func) via1[vT1CL] = MAC_CLOCK_LOW; via1[vT1CH] = MAC_CLOCK_HIGH; - if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func)) + if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func)) pr_err("Couldn't register %s interrupt\n", "timer"); } @@ -292,25 +292,19 @@ void __init via_init_clock(irq_handler_t func) void __init via_register_interrupts(void) { if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "software", - (void *) via1)) + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", + (void *)via1)) pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1", - (void *) via1)) + if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } else { - if (request_irq(IRQ_AUTO_1, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1", - (void *) via1)) + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } - if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST, - "via2", (void *) via2)) + if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2)) + if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", + (void *)via2)) pr_err("Couldn't register %s interrupt\n", "nubus"); } diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 6cb9c3a9b6c9..01f2adf3f19f 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -114,8 +114,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id) void mvme147_sched_init (irq_handler_t timer_routine) { tick_handler = timer_routine; - if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE, - "timer 1", NULL)) + if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL)) pr_err("Couldn't register timer interrupt\n"); /* Init the clock with a value */ diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 817f37a875c9..c9570fcf1cce 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -159,7 +159,7 @@ int macii_init(void) err = macii_init_via(); if (err) goto out; - err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB", + err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB", macii_interrupt); if (err) goto out; diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 9ab5b0c34f0d..34d02a91b29f 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -122,8 +122,8 @@ maciisi_init(void) return err; } - if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, - "ADB", maciisi_interrupt)) { + if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB", + maciisi_interrupt)) { printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB); return -EAGAIN; } -- cgit v1.2.3 From 4936f63cb790e265eb30a1e1630bb90bd6af0e7a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 21 Apr 2011 22:50:52 +0200 Subject: m68k/irq: Add genirq support Disabled on all platforms for now Signed-off-by: Geert Uytterhoeven [v1] Acked-by: Thomas Gleixner --- arch/m68k/Kconfig | 17 ++++++++++++++ arch/m68k/include/asm/hardirq.h | 5 ++++ arch/m68k/include/asm/irq.h | 41 +++++++++++++++++++++++++------- arch/m68k/kernel/Makefile | 9 +++++-- arch/m68k/kernel/ints.c | 52 ++++++++++++++++++++++++++++++++++++++++- 5 files changed, 112 insertions(+), 12 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 6c28582fb98f..a7597e119ab0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -84,6 +84,23 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA +config USE_GENERIC_HARDIRQS + bool "Use genirq" + depends on MMU + depends on !AMIGA + depends on !ATARI + depends on !MAC + depends on !APOLLO + depends on !MVME147 + depends on !MVME16x + depends on !BVME6000 + depends on !HP300 + depends on !SUN3X + depends on !Q40 + depends on !SUN3 + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_SHOW + menu "Platform setup" source arch/m68k/Kconfig.cpu diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h index 870e5347155b..db30ed276878 100644 --- a/arch/m68k/include/asm/hardirq.h +++ b/arch/m68k/include/asm/hardirq.h @@ -18,6 +18,11 @@ #ifdef CONFIG_MMU +static inline void ack_bad_irq(unsigned int irq) +{ + pr_crit("unexpected IRQ trap at vector %02x\n", irq); +} + /* entry.S is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 9a2bae8ef5b7..518e61f2fccb 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -27,11 +27,6 @@ #ifdef CONFIG_MMU -#include -#include -#include -#include - /* * Interrupt source definitions * General interrupt sources are the level 1-7. @@ -54,10 +49,6 @@ #define IRQ_USER 8 -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - /* * various flags for request_irq() - the Amiga now uses the standard * mechanism like all other architectures - IRQF_DISABLED and @@ -71,6 +62,15 @@ struct pt_regs; #define IRQ_FLG_STD (0x8000) /* internally used */ #endif +#ifndef CONFIG_GENERIC_HARDIRQS + +#include +#include +#include +#include + +struct pt_regs; + /* * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). @@ -121,10 +121,33 @@ extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); extern void generic_handle_irq(unsigned int); asmlinkage void do_IRQ(int irq, struct pt_regs *regs); +#else /* CONFIG_GENERIC_HARDIRQS */ + +struct irq_data; +struct irq_chip; +struct irq_desc; +extern unsigned int m68k_irq_startup(struct irq_data *data); +extern unsigned int m68k_irq_startup_irq(unsigned int irq); +extern void m68k_irq_shutdown(struct irq_data *data); +extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, + struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, + void (*handler)(unsigned int, + struct pt_regs *)); +extern void m68k_setup_irq_controller(struct irq_chip *, + void (*handle)(unsigned int irq, + struct irq_desc *desc), + unsigned int irq, unsigned int cnt); + +#endif /* CONFIG_GENERIC_HARDIRQS */ + +extern unsigned int irq_canonicalize(unsigned int irq); + #else #define irq_canonicalize(irq) (irq) #endif /* CONFIG_MMU */ asmlinkage void do_IRQ(int irq, struct pt_regs *regs); +extern atomic_t irq_err_count; #endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index e7f0f2e5ad44..141425785c4e 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -9,13 +9,18 @@ extra-y += vmlinux.lds obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ sys_m68k.o syscalltable.o time.o traps.o -obj-$(CONFIG_MMU) += ints.o devres.o vectors.o +obj-$(CONFIG_MMU) += ints.o vectors.o devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o endif ifndef CONFIG_MMU -obj-y += init_task.o irq.o +obj-y += init_task.o +endif +ifdef CONFIG_GENERIC_HARDIRQS +obj-y += irq.o +else +obj-y += devres.o endif diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index f6a469865125..cea439f9819b 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -31,6 +31,7 @@ extern u32 auto_irqhandler_fixup[]; extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; +#ifndef CONFIG_GENERIC_HARDIRQS /* table for system interrupt handlers */ static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; @@ -41,6 +42,8 @@ static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) irq_chip[irq] = chip; return 0; } +#define irq_set_chip_and_handler(irq, chip, dummy) irq_set_chip(irq, chip) +#endif /* !CONFIG_GENERIC_HARDIRQS */ static int m68k_first_user_vec; @@ -56,8 +59,10 @@ static struct irq_chip user_irq_chip = { .irq_shutdown = m68k_irq_shutdown, }; +#ifndef CONFIG_GENERIC_HARDIRQS #define NUM_IRQ_NODES 100 static struct irq_data nodes[NUM_IRQ_NODES]; +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* * void init_IRQ(void) @@ -81,7 +86,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_set_chip(i, &auto_irq_chip); + irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq); mach_init_IRQ(); } @@ -128,6 +133,35 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, flush_icache(); } +#ifdef CONFIG_GENERIC_HARDIRQS + +/** + * m68k_setup_irq_controller + * @chip: irq chip which controls specified irq + * @handle: flow handler which handles specified irq + * @irq: first irq to be managed by the controller + * @cnt: number of irqs to be managed by the controller + * + * Change the controller for the specified range of irq, which will be used to + * manage these irq. auto/user irq already have a default controller, which can + * be changed as well, but the controller probably should use m68k_irq_startup/ + * m68k_irq_shutdown. + */ +void m68k_setup_irq_controller(struct irq_chip *chip, + irq_flow_handler_t handle, unsigned int irq, + unsigned int cnt) +{ + int i; + + for (i = 0; i < cnt; i++) { + irq_set_chip(irq + i, chip); + if (handle) + irq_set_handler(irq + i, handle); + } +} + +#else /* !CONFIG_GENERIC_HARDIRQS */ + /** * m68k_setup_irq_chip * @contr: irq controller which controls specified irq @@ -316,6 +350,8 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); +#endif /* !CONFIG_GENERIC_HARDIRQS */ + unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) @@ -341,6 +377,8 @@ void m68k_irq_shutdown(struct irq_data *data) } +#ifndef CONFIG_GENERIC_HARDIRQS + /* * Do we need these probe functions on the m68k? * @@ -367,6 +405,7 @@ int probe_irq_off (unsigned long irqs) } EXPORT_SYMBOL(probe_irq_off); +#endif /* CONFIG_GENERIC_HARDIRQS */ unsigned int irq_canonicalize(unsigned int irq) { @@ -379,6 +418,7 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); +#ifndef CONFIG_GENERIC_HARDIRQS void generic_handle_irq(unsigned int irq) { struct irq_data *node; @@ -428,3 +468,13 @@ void init_irq_proc(void) /* Insert /proc/irq driver here */ } #endif + +#else /* CONFIG_GENERIC_HARDIRQS */ + +asmlinkage void handle_badint(struct pt_regs *regs) +{ + atomic_inc(&irq_err_count); + pr_warn("unexpected interrupt from %u\n", regs->vector); +} + +#endif /* CONFIG_GENERIC_HARDIRQS */ -- cgit v1.2.3 From e59629ddc6eddbd00e81b4afb814583cfcc4706d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Apr 2011 23:35:21 +0200 Subject: m68k/atari: Convert Atari to genirq Signed-off-by: Geert Uytterhoeven [v1] Acked-by: Thomas Gleixner --- arch/m68k/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index a7597e119ab0..9d60f4004076 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -88,7 +88,6 @@ config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU depends on !AMIGA - depends on !ATARI depends on !MAC depends on !APOLLO depends on !MVME147 -- cgit v1.2.3 From 34971bad3a1511db7b76eeb2337819967a135075 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 19:36:30 +0200 Subject: m68k/atari: Remove code and comments about different irq types This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/atari/ataints.c | 236 ---------------------------------------------- 1 file changed, 236 deletions(-) diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 6149ff994641..af544557dd1d 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -60,244 +60,8 @@ * ): Autovector interrupts are 1..7, then follow ST-MFP, * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can * be allocated by atari_register_vme_int(). - * - * Each interrupt can be of three types: - * - * - SLOW: The handler runs with all interrupts enabled, except the one it - * was called by (to avoid reentering). This should be the usual method. - * But it is currently possible only for MFP ints, since only the MFP - * offers an easy way to mask interrupts. - * - * - FAST: The handler runs with all interrupts disabled. This should be used - * only for really fast handlers, that just do actions immediately - * necessary, and let the rest do a bottom half or task queue. - * - * - PRIORITIZED: The handler can be interrupted by higher-level ints - * (greater IPL, no MFP priorities!). This is the method of choice for ints - * which should be slow, but are not from a MFP. - * - * The feature of more than one handler for one int source is still there, but - * only applicable if all handers are of the same type. To not slow down - * processing of ints with only one handler by the chaining feature, the list - * calling function atari_call_irq_list() is only plugged in at the time the - * second handler is registered. - * - * Implementation notes: For fast-as-possible int handling, there are separate - * entry points for each type (slow/fast/prio). The assembler handler calls - * the irq directly in the usual case, no C wrapper is involved. In case of - * multiple handlers, atari_call_irq_list() is registered as handler and calls - * in turn the real irq's. To ease access from assembler level to the irq - * function pointer and accompanying data, these two are stored in a separate - * array, irq_handler[]. The rest of data (type, name) are put into a second - * array, irq_param, that is accessed from C only. For each slow interrupt (32 - * in all) there are separate handler functions, which makes it possible to - * hard-code the MFP register address and value, are necessary to mask the - * int. If there'd be only one generic function, lots of calculations would be - * needed to determine MFP register and int mask from the vector number :-( - * - * Furthermore, slow ints may not lower the IPL below its previous value - * (before the int happened). This is needed so that an int of class PRIO, on - * that this int may be stacked, cannot be reentered. This feature is - * implemented as follows: If the stack frame format is 1 (throwaway), the int - * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level - * 2, which still blocks the HSYNC, but no interrupts of interest. If the - * frame format is 0, the int is nested, and the old IPL value can be found in - * the sr copy in the frame. */ -#if 0 - -#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES) - -typedef void (*asm_irq_handler)(void); - -struct irqhandler { - irqreturn_t (*handler)(int, void *, struct pt_regs *); - void *dev_id; -}; - -struct irqparam { - unsigned long flags; - const char *devname; -}; - -/* - * Array with irq's and their parameter data. This array is accessed from low - * level assembler code, so an element size of 8 allows usage of index scaling - * addressing mode. - */ -static struct irqhandler irq_handler[NUM_INT_SOURCES]; - -/* - * This array hold the rest of parameters of int handlers: type - * (slow,fast,prio) and the name of the handler. These values are only - * accessed from C - */ -static struct irqparam irq_param[NUM_INT_SOURCES]; - -/* check for valid int number (complex, sigh...) */ -#define IS_VALID_INTNO(n) \ - ((n) > 0 && \ - /* autovec and ST-MFP ok anyway */ \ - (((n) < TTMFP_SOURCE_BASE) || \ - /* TT-MFP ok if present */ \ - ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE && \ - ATARIHW_PRESENT(TT_MFP)) || \ - /* SCC ok if present and number even */ \ - ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE && \ - !((n) & 1) && ATARIHW_PRESENT(SCC)) || \ - /* greater numbers ok if they are registered VME vectors */ \ - ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \ - free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE))))) - - -/* - * Here start the assembler entry points for interrupts - */ - -#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void) - -#define BUILD_SLOW_IRQ(n) \ -asmlinkage void IRQ_NAME(n); \ -/* Dummy function to allow asm with operands. */ \ -void atari_slow_irq_##n##_dummy (void) { \ -__asm__ (__ALIGN_STR "\n" \ -"atari_slow_irq_" #n "_handler:\t" \ -" addl %6,%5\n" /* preempt_count() += HARDIRQ_OFFSET */ \ - SAVE_ALL_INT "\n" \ - GET_CURRENT(%%d0) "\n" \ -" andb #~(1<<(%c3&7)),%a4:w\n" /* mask this interrupt */ \ - /* get old IPL from stack frame */ \ -" bfextu %%sp@(%c2){#5,#3},%%d0\n" \ -" movew %%sr,%%d1\n" \ -" bfins %%d0,%%d1{#21,#3}\n" \ -" movew %%d1,%%sr\n" /* set IPL = previous value */ \ -" addql #1,%a0\n" \ -" lea %a1,%%a0\n" \ -" pea %%sp@\n" /* push addr of frame */ \ -" movel %%a0@(4),%%sp@-\n" /* push handler data */ \ -" pea (%c3+8)\n" /* push int number */ \ -" movel %%a0@,%%a0\n" \ -" jbsr %%a0@\n" /* call the handler */ \ -" addql #8,%%sp\n" \ -" addql #4,%%sp\n" \ -" orw #0x0600,%%sr\n" \ -" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \ -" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \ -" jbra ret_from_interrupt\n" \ - : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \ - "n" (PT_OFF_SR), "n" (n), \ - "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \ - : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \ - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \ -); \ - for (;;); /* fake noreturn */ \ -} - -BUILD_SLOW_IRQ(0); -BUILD_SLOW_IRQ(1); -BUILD_SLOW_IRQ(2); -BUILD_SLOW_IRQ(3); -BUILD_SLOW_IRQ(4); -BUILD_SLOW_IRQ(5); -BUILD_SLOW_IRQ(6); -BUILD_SLOW_IRQ(7); -BUILD_SLOW_IRQ(8); -BUILD_SLOW_IRQ(9); -BUILD_SLOW_IRQ(10); -BUILD_SLOW_IRQ(11); -BUILD_SLOW_IRQ(12); -BUILD_SLOW_IRQ(13); -BUILD_SLOW_IRQ(14); -BUILD_SLOW_IRQ(15); -BUILD_SLOW_IRQ(16); -BUILD_SLOW_IRQ(17); -BUILD_SLOW_IRQ(18); -BUILD_SLOW_IRQ(19); -BUILD_SLOW_IRQ(20); -BUILD_SLOW_IRQ(21); -BUILD_SLOW_IRQ(22); -BUILD_SLOW_IRQ(23); -BUILD_SLOW_IRQ(24); -BUILD_SLOW_IRQ(25); -BUILD_SLOW_IRQ(26); -BUILD_SLOW_IRQ(27); -BUILD_SLOW_IRQ(28); -BUILD_SLOW_IRQ(29); -BUILD_SLOW_IRQ(30); -BUILD_SLOW_IRQ(31); - -asm_irq_handler slow_handlers[32] = { - [0] = atari_slow_irq_0_handler, - [1] = atari_slow_irq_1_handler, - [2] = atari_slow_irq_2_handler, - [3] = atari_slow_irq_3_handler, - [4] = atari_slow_irq_4_handler, - [5] = atari_slow_irq_5_handler, - [6] = atari_slow_irq_6_handler, - [7] = atari_slow_irq_7_handler, - [8] = atari_slow_irq_8_handler, - [9] = atari_slow_irq_9_handler, - [10] = atari_slow_irq_10_handler, - [11] = atari_slow_irq_11_handler, - [12] = atari_slow_irq_12_handler, - [13] = atari_slow_irq_13_handler, - [14] = atari_slow_irq_14_handler, - [15] = atari_slow_irq_15_handler, - [16] = atari_slow_irq_16_handler, - [17] = atari_slow_irq_17_handler, - [18] = atari_slow_irq_18_handler, - [19] = atari_slow_irq_19_handler, - [20] = atari_slow_irq_20_handler, - [21] = atari_slow_irq_21_handler, - [22] = atari_slow_irq_22_handler, - [23] = atari_slow_irq_23_handler, - [24] = atari_slow_irq_24_handler, - [25] = atari_slow_irq_25_handler, - [26] = atari_slow_irq_26_handler, - [27] = atari_slow_irq_27_handler, - [28] = atari_slow_irq_28_handler, - [29] = atari_slow_irq_29_handler, - [30] = atari_slow_irq_30_handler, - [31] = atari_slow_irq_31_handler -}; - -asmlinkage void atari_fast_irq_handler( void ); -asmlinkage void atari_prio_irq_handler( void ); - -/* Dummy function to allow asm with operands. */ -void atari_fast_prio_irq_dummy (void) { -__asm__ (__ALIGN_STR "\n" -"atari_fast_irq_handler:\n\t" - "orw #0x700,%%sr\n" /* disable all interrupts */ -"atari_prio_irq_handler:\n\t" - "addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */ - SAVE_ALL_INT "\n\t" - GET_CURRENT(%%d0) "\n\t" - /* get vector number from stack frame and convert to source */ - "bfextu %%sp@(%c1){#4,#10},%%d0\n\t" - "subw #(0x40-8),%%d0\n\t" - "jpl 1f\n\t" - "addw #(0x40-8-0x18),%%d0\n" - "1:\tlea %a0,%%a0\n\t" - "addql #1,%%a0@(%%d0:l:4)\n\t" - "lea irq_handler,%%a0\n\t" - "lea %%a0@(%%d0:l:8),%%a0\n\t" - "pea %%sp@\n\t" /* push frame address */ - "movel %%a0@(4),%%sp@-\n\t" /* push handler data */ - "movel %%d0,%%sp@-\n\t" /* push int number */ - "movel %%a0@,%%a0\n\t" - "jsr %%a0@\n\t" /* and call the handler */ - "addql #8,%%sp\n\t" - "addql #4,%%sp\n\t" - "jbra ret_from_interrupt" - : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC), - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) -); - for (;;); -} -#endif - /* * Bitmap for free interrupt vector numbers * (new vectors starting from 0x70 can be allocated by -- cgit v1.2.3 From 92b1bd5f1aa88ce4760c02814bfcbb58ad521984 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 11:11:01 +0200 Subject: m68k/amiga: Refactor amiints.c - Remove filename in comments, - Reorder functions so we no longer need forward declarations. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 98 +++++++++++++++++++++++------------------------ 1 file changed, 47 insertions(+), 51 deletions(-) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index e5f3033499e7..c8f9eac121a1 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -1,5 +1,5 @@ /* - * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code + * Amiga Linux interrupt handling code * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive @@ -16,56 +16,6 @@ #include #include -static void amiga_irq_enable(struct irq_data *data); -static void amiga_irq_disable(struct irq_data *data); -static irqreturn_t ami_int1(int irq, void *dev_id); -static irqreturn_t ami_int3(int irq, void *dev_id); -static irqreturn_t ami_int4(int irq, void *dev_id); -static irqreturn_t ami_int5(int irq, void *dev_id); - -static struct irq_chip amiga_irq_chip = { - .name = "amiga", - .irq_enable = amiga_irq_enable, - .irq_disable = amiga_irq_disable, -}; - -/* - * void amiga_init_IRQ(void) - * - * Parameters: None - * - * Returns: Nothing - * - * This function should be called during kernel startup to initialize - * the amiga IRQ handling routines. - */ - -void __init amiga_init_IRQ(void) -{ - if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) - pr_err("Couldn't register int%d\n", 1); - if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) - pr_err("Couldn't register int%d\n", 3); - if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) - pr_err("Couldn't register int%d\n", 4); - if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) - pr_err("Couldn't register int%d\n", 5); - - m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, - AMI_STD_IRQS); - - /* turn off PCMCIA interrupts */ - if (AMIGAHW_PRESENT(PCMCIA)) - gayle.inten = GAYLE_IRQ_IDE; - - /* turn off all interrupts and enable the master interrupt bit */ - amiga_custom.intena = 0x7fff; - amiga_custom.intreq = 0x7fff; - amiga_custom.intena = IF_SETCLR | IF_INTEN; - - cia_init_IRQ(&ciaa_base); - cia_init_IRQ(&ciab_base); -} /* * Enable/disable a particular machine specific interrupt source. @@ -84,6 +34,13 @@ static void amiga_irq_disable(struct irq_data *data) amiga_custom.intena = 1 << (data->irq - IRQ_USER); } +static struct irq_chip amiga_irq_chip = { + .name = "amiga", + .irq_enable = amiga_irq_enable, + .irq_disable = amiga_irq_disable, +}; + + /* * The builtin Amiga hardware interrupt handlers. */ @@ -183,3 +140,42 @@ static irqreturn_t ami_int5(int irq, void *dev_id) } return IRQ_HANDLED; } + + +/* + * void amiga_init_IRQ(void) + * + * Parameters: None + * + * Returns: Nothing + * + * This function should be called during kernel startup to initialize + * the amiga IRQ handling routines. + */ + +void __init amiga_init_IRQ(void) +{ + if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) + pr_err("Couldn't register int%d\n", 1); + if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) + pr_err("Couldn't register int%d\n", 3); + if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) + pr_err("Couldn't register int%d\n", 4); + if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) + pr_err("Couldn't register int%d\n", 5); + + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); + + /* turn off PCMCIA interrupts */ + if (AMIGAHW_PRESENT(PCMCIA)) + gayle.inten = GAYLE_IRQ_IDE; + + /* turn off all interrupts and enable the master interrupt bit */ + amiga_custom.intena = 0x7fff; + amiga_custom.intreq = 0x7fff; + amiga_custom.intena = IF_SETCLR | IF_INTEN; + + cia_init_IRQ(&ciaa_base); + cia_init_IRQ(&ciab_base); +} -- cgit v1.2.3 From 978ef7e6d0e02083e4a62ab4411922bdeffa36a4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 22:08:28 +0200 Subject: m68k/amiga: Convert Amiga to genirq Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 - arch/m68k/amiga/amiints.c | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9d60f4004076..9000921385aa 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !AMIGA depends on !MAC depends on !APOLLO depends on !MVME147 diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c8f9eac121a1..c3da5342f495 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -9,6 +9,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include -- cgit v1.2.3 From fb1b646aa3bcae2f8211136a6b40228c7c9d236c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Jun 2011 11:49:18 +0200 Subject: m68k/amiga: Optimize interrupts using chain handlers Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c3da5342f495..a8da47126584 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -48,6 +48,99 @@ static struct irq_chip amiga_irq_chip = { * The builtin Amiga hardware interrupt handlers. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void ami_int1(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if serial transmit buffer empty, interrupt */ + if (ints & IF_TBE) { + amiga_custom.intreq = IF_TBE; + generic_handle_irq(IRQ_AMIGA_TBE); + } + + /* if floppy disk transfer complete, interrupt */ + if (ints & IF_DSKBLK) { + amiga_custom.intreq = IF_DSKBLK; + generic_handle_irq(IRQ_AMIGA_DSKBLK); + } + + /* if software interrupt set, interrupt */ + if (ints & IF_SOFT) { + amiga_custom.intreq = IF_SOFT; + generic_handle_irq(IRQ_AMIGA_SOFT); + } +} + +static void ami_int3(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if a blitter interrupt */ + if (ints & IF_BLIT) { + amiga_custom.intreq = IF_BLIT; + generic_handle_irq(IRQ_AMIGA_BLIT); + } + + /* if a copper interrupt */ + if (ints & IF_COPER) { + amiga_custom.intreq = IF_COPER; + generic_handle_irq(IRQ_AMIGA_COPPER); + } + + /* if a vertical blank interrupt */ + if (ints & IF_VERTB) { + amiga_custom.intreq = IF_VERTB; + generic_handle_irq(IRQ_AMIGA_VERTB); + } +} + +static void ami_int4(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if audio 0 interrupt */ + if (ints & IF_AUD0) { + amiga_custom.intreq = IF_AUD0; + generic_handle_irq(IRQ_AMIGA_AUD0); + } + + /* if audio 1 interrupt */ + if (ints & IF_AUD1) { + amiga_custom.intreq = IF_AUD1; + generic_handle_irq(IRQ_AMIGA_AUD1); + } + + /* if audio 2 interrupt */ + if (ints & IF_AUD2) { + amiga_custom.intreq = IF_AUD2; + generic_handle_irq(IRQ_AMIGA_AUD2); + } + + /* if audio 3 interrupt */ + if (ints & IF_AUD3) { + amiga_custom.intreq = IF_AUD3; + generic_handle_irq(IRQ_AMIGA_AUD3); + } +} + +static void ami_int5(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if serial receive buffer full interrupt */ + if (ints & IF_RBF) { + /* acknowledge of IF_RBF must be done by the serial interrupt */ + generic_handle_irq(IRQ_AMIGA_RBF); + } + + /* if a disk sync interrupt */ + if (ints & IF_DSKSYN) { + amiga_custom.intreq = IF_DSKSYN; + generic_handle_irq(IRQ_AMIGA_DSKSYN); + } +} +#else /* !CONFIG_GENERIC_HARDIRQS */ static irqreturn_t ami_int1(int irq, void *dev_id) { unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; @@ -143,6 +236,7 @@ static irqreturn_t ami_int5(int irq, void *dev_id) } return IRQ_HANDLED; } +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* @@ -158,6 +252,15 @@ static irqreturn_t ami_int5(int irq, void *dev_id) void __init amiga_init_IRQ(void) { +#ifdef CONFIG_GENERIC_HARDIRQS + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); + + irq_set_chained_handler(IRQ_AUTO_1, ami_int1); + irq_set_chained_handler(IRQ_AUTO_3, ami_int3); + irq_set_chained_handler(IRQ_AUTO_4, ami_int4); + irq_set_chained_handler(IRQ_AUTO_5, ami_int5); +#else /* !CONFIG_GENERIC_HARDIRQS */ if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) pr_err("Couldn't register int%d\n", 1); if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) @@ -169,6 +272,7 @@ void __init amiga_init_IRQ(void) m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, AMI_STD_IRQS); +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) -- cgit v1.2.3 From ddc7fd25d09678f8252c0321ef4b66e8451abe7d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 21:48:30 +0200 Subject: m68k/mac: Convert Mac to genirq Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 - arch/m68k/mac/baboon.c | 3 +++ arch/m68k/mac/oss.c | 3 +++ arch/m68k/mac/psc.c | 3 +++ arch/m68k/mac/via.c | 3 +++ 5 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9000921385aa..9ba1a89e0032 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !MAC depends on !APOLLO depends on !MVME147 depends on !MVME16x diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index f264791b8694..ff11746b0621 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -11,6 +11,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index 1eb60f071007..ed952704e6ee 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -19,6 +19,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 26c2b6595808..0a34b7afc376 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -18,6 +18,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index af9ed33bec14..bde156caa46d 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -28,6 +28,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include -- cgit v1.2.3 From 9145db564eae98134de8eb8d64b47d7177eccfdd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Aug 2011 12:48:29 +0200 Subject: m68k/mac: Optimize interrupts using chain handlers Signed-off-by: Geert Uytterhoeven --- arch/m68k/mac/baboon.c | 38 +++++++++++++ arch/m68k/mac/oss.c | 106 +++++++++++++++++++++++++++++------- arch/m68k/mac/psc.c | 74 +++++++++++++++++++------ arch/m68k/mac/via.c | 143 ++++++++++++++++++++++++++++++++++++++++--------- 4 files changed, 298 insertions(+), 63 deletions(-) diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index ff11746b0621..425144cbfa7d 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -56,6 +56,39 @@ void __init baboon_init(void) * Baboon interrupt handler. This works a lot like a VIA. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void baboon_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_bit, irq_num; + unsigned char events; + +#ifdef DEBUG_IRQS + printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n", + (uint) baboon->mb_control, (uint) baboon->mb_ifr, + (uint) baboon->mb_status); +#endif + + events = baboon->mb_ifr & 0x07; + if (!events) + return; + + irq_num = IRQ_BABOON_0; + irq_bit = 1; + do { + if (events & irq_bit) { + baboon->mb_ifr &= ~irq_bit; + generic_handle_irq(irq_num); + } + irq_bit <<= 1; + irq_num++; + } while(events >= irq_bit); +#if 0 + if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL); + /* for now we need to smash all interrupts */ + baboon->mb_ifr &= ~events; +#endif +} +#else static irqreturn_t baboon_irq(int irq, void *dev_id) { int irq_bit, irq_num; @@ -87,6 +120,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) #endif return IRQ_HANDLED; } +#endif /* * Register the Baboon interrupt dispatcher on nubus slot $C. @@ -95,8 +129,12 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) void __init baboon_register_interrupts(void) { baboon_disabled = 0; +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); +#else if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon)) pr_err("Couldn't register baboon interrupt\n"); +#endif } /* diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index ed952704e6ee..cc784c2ff6e8 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -32,10 +32,11 @@ int oss_present; volatile struct mac_oss *oss; -static irqreturn_t oss_irq(int, void *); -static irqreturn_t oss_nubus_irq(int, void *); - +#ifdef CONFIG_GENERIC_HARDIRQS +extern void via1_irq(unsigned int irq, struct irq_desc *desc); +#else extern irqreturn_t via1_irq(int, void *); +#endif /* * Initialize the OSS @@ -62,23 +63,6 @@ void __init oss_init(void) oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1; } -/* - * Register the OSS and NuBus interrupt dispatchers. - */ - -void __init oss_register_interrupts(void) -{ - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", - (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); -} - /* * Initialize OSS for Nubus access */ @@ -92,6 +76,34 @@ void __init oss_nubus_init(void) * and SCSI; everything else is routed to its own autovector IRQ. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void oss_irq(unsigned int irq, struct irq_desc *desc) +{ + int events; + + events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); + if (!events) + return; + +#ifdef DEBUG_IRQS + if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { + printk("oss_irq: irq %u events = 0x%04X\n", irq, + (int) oss->irq_pending); + } +#endif + /* FIXME: how do you clear a pending IRQ? */ + + if (events & OSS_IP_SOUND) { + oss->irq_pending &= ~OSS_IP_SOUND; + /* FIXME: call sound handler */ + } else if (events & OSS_IP_SCSI) { + oss->irq_pending &= ~OSS_IP_SCSI; + generic_handle_irq(IRQ_MAC_SCSI); + } else { + /* FIXME: error check here? */ + } +} +#else static irqreturn_t oss_irq(int irq, void *dev_id) { int events; @@ -119,6 +131,7 @@ static irqreturn_t oss_irq(int irq, void *dev_id) } return IRQ_HANDLED; } +#endif /* * Nubus IRQ handler, OSS style @@ -126,6 +139,34 @@ static irqreturn_t oss_irq(int irq, void *dev_id) * Unlike the VIA/RBV this is on its own autovector interrupt level. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) +{ + int events, irq_bit, i; + + events = oss->irq_pending & OSS_IP_NUBUS; + if (!events) + return; + +#ifdef DEBUG_NUBUS_INT + if (console_loglevel > 7) { + printk("oss_nubus_irq: events = 0x%04X\n", events); + } +#endif + /* There are only six slots on the OSS, not seven */ + + i = 6; + irq_bit = 0x40; + do { + --i; + irq_bit >>= 1; + if (events & irq_bit) { + oss->irq_pending &= ~irq_bit; + generic_handle_irq(NUBUS_SOURCE_BASE + i); + } + } while(events & (irq_bit - 1)); +} +#else static irqreturn_t oss_nubus_irq(int irq, void *dev_id) { int events, irq_bit, i; @@ -153,6 +194,31 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) } while(events & (irq_bit - 1)); return IRQ_HANDLED; } +#endif + +/* + * Register the OSS and NuBus interrupt dispatchers. + */ + +void __init oss_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); + irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); +#else /* !CONFIG_GENERIC_HARDIRQS */ + if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "scsi"); + if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", + (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "nubus"); + if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "sound"); + if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); +#endif /* !CONFIG_GENERIC_HARDIRQS */ +} /* * Enable an OSS interrupt diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 0a34b7afc376..52840b8c03b8 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -33,8 +33,6 @@ int psc_present; volatile __u8 *psc; -irqreturn_t psc_irq(int, void *); - /* * Debugging dump, used in various places to see what's going on. */ @@ -115,26 +113,40 @@ void __init psc_init(void) } /* - * Register the PSC interrupt dispatchers for autovector interrupts 3-6. + * PSC interrupt handler. It's a lot like the VIA interrupt handler. */ -void __init psc_register_interrupts(void) +#ifdef CONFIG_GENERIC_HARDIRQS +static void psc_irq(unsigned int irq, struct irq_desc *desc) { - if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) - pr_err("Couldn't register psc%d interrupt\n", 3); - if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) - pr_err("Couldn't register psc%d interrupt\n", 4); - if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) - pr_err("Couldn't register psc%d interrupt\n", 5); - if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) - pr_err("Couldn't register psc%d interrupt\n", 6); -} + unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc); + int pIFR = pIFRbase + offset; + int pIER = pIERbase + offset; + int irq_num; + unsigned char irq_bit, events; -/* - * PSC interrupt handler. It's a lot like the VIA interrupt handler. - */ +#ifdef DEBUG_IRQS + printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n", + irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); +#endif -irqreturn_t psc_irq(int irq, void *dev_id) + events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; + if (!events) + return; + + irq_num = irq << 3; + irq_bit = 1; + do { + if (events & irq_bit) { + psc_write_byte(pIFR, irq_bit); + generic_handle_irq(irq_num); + } + irq_num++; + irq_bit <<= 1; + } while (events >= irq_bit); +} +#else +static irqreturn_t psc_irq(int irq, void *dev_id) { int pIFR = pIFRbase + ((int) dev_id); int pIER = pIERbase + ((int) dev_id); @@ -162,6 +174,34 @@ irqreturn_t psc_irq(int irq, void *dev_id) } while (events >= irq_bit); return IRQ_HANDLED; } +#endif + +/* + * Register the PSC interrupt dispatchers for autovector interrupts 3-6. + */ + +void __init psc_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(IRQ_AUTO_3, psc_irq); + irq_set_handler_data(IRQ_AUTO_3, (void *)0x30); + irq_set_chained_handler(IRQ_AUTO_4, psc_irq); + irq_set_handler_data(IRQ_AUTO_4, (void *)0x40); + irq_set_chained_handler(IRQ_AUTO_5, psc_irq); + irq_set_handler_data(IRQ_AUTO_5, (void *)0x50); + irq_set_chained_handler(IRQ_AUTO_6, psc_irq); + irq_set_handler_data(IRQ_AUTO_6, (void *)0x60); +#else /* !CONFIG_GENERIC_HARDIRQS */ + if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) + pr_err("Couldn't register psc%d interrupt\n", 3); + if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) + pr_err("Couldn't register psc%d interrupt\n", 4); + if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) + pr_err("Couldn't register psc%d interrupt\n", 5); + if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) + pr_err("Couldn't register psc%d interrupt\n", 6); +#endif /* !CONFIG_GENERIC_HARDIRQS */ +} void psc_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index bde156caa46d..b8156ac496a0 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -80,9 +80,6 @@ static int gIER,gIFR,gBufA,gBufB; static u8 nubus_disabled; void via_debug_dump(void); -irqreturn_t via1_irq(int, void *); -irqreturn_t via2_irq(int, void *); -irqreturn_t via_nubus_irq(int, void *); void via_irq_enable(int irq); void via_irq_disable(int irq); void via_irq_clear(int irq); @@ -288,29 +285,6 @@ void __init via_init_clock(irq_handler_t func) pr_err("Couldn't register %s interrupt\n", "timer"); } -/* - * Register the interrupt dispatchers for VIA or RBV machines only. - */ - -void __init via_register_interrupts(void) -{ - if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", - (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } else { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } - if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", - (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "nubus"); -} - /* * Debugging dump, used in various places to see what's going on. */ @@ -443,6 +417,49 @@ void __init via_nubus_init(void) * via6522.c :-), disable/pending masks added. */ +#ifdef CONFIG_GENERIC_HARDIRQS +void via1_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_num; + unsigned char irq_bit, events; + + events = via1[vIFR] & via1[vIER] & 0x7F; + if (!events) + return; + + irq_num = VIA1_SOURCE_BASE; + irq_bit = 1; + do { + if (events & irq_bit) { + via1[vIFR] = irq_bit; + generic_handle_irq(irq_num); + } + ++irq_num; + irq_bit <<= 1; + } while (events >= irq_bit); +} + +static void via2_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_num; + unsigned char irq_bit, events; + + events = via2[gIFR] & via2[gIER] & 0x7F; + if (!events) + return; + + irq_num = VIA2_SOURCE_BASE; + irq_bit = 1; + do { + if (events & irq_bit) { + via2[gIFR] = irq_bit | rbv_clear; + generic_handle_irq(irq_num); + } + ++irq_num; + irq_bit <<= 1; + } while (events >= irq_bit); +} +#else irqreturn_t via1_irq(int irq, void *dev_id) { int irq_num; @@ -486,12 +503,49 @@ irqreturn_t via2_irq(int irq, void *dev_id) } while (events >= irq_bit); return IRQ_HANDLED; } +#endif /* * Dispatch Nubus interrupts. We are called as a secondary dispatch by the * VIA2 dispatcher as a fast interrupt handler. */ +#ifdef CONFIG_GENERIC_HARDIRQS +void via_nubus_irq(unsigned int irq, struct irq_desc *desc) +{ + int slot_irq; + unsigned char slot_bit, events; + + events = ~via2[gBufA] & 0x7F; + if (rbv_present) + events &= via2[rSIER]; + else + events &= ~via2[vDirA]; + if (!events) + return; + + do { + slot_irq = IRQ_NUBUS_F; + slot_bit = 0x40; + do { + if (events & slot_bit) { + events &= ~slot_bit; + generic_handle_irq(slot_irq); + } + --slot_irq; + slot_bit >>= 1; + } while (events); + + /* clear the CA1 interrupt and make certain there's no more. */ + via2[gIFR] = 0x02 | rbv_clear; + events = ~via2[gBufA] & 0x7F; + if (rbv_present) + events &= via2[rSIER]; + else + events &= ~via2[vDirA]; + } while (events); +} +#else irqreturn_t via_nubus_irq(int irq, void *dev_id) { int slot_irq; @@ -527,6 +581,43 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) } while (events); return IRQ_HANDLED; } +#endif + +/* + * Register the interrupt dispatchers for VIA or RBV machines only. + */ + +void __init via_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + if (via_alt_mapping) { + /* software interrupt */ + irq_set_chained_handler(IRQ_AUTO_1, via1_irq); + /* via1 interrupt */ + irq_set_chained_handler(IRQ_AUTO_6, via1_irq); + } else { + irq_set_chained_handler(IRQ_AUTO_1, via1_irq); + } + irq_set_chained_handler(IRQ_AUTO_2, via2_irq); + irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq); +#else + if (via_alt_mapping) { + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", + (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "software"); + if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); + } else { + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); + } + if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) + pr_err("Couldn't register %s interrupt\n", "via2"); + if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", + (void *)via2)) + pr_err("Couldn't register %s interrupt\n", "nubus"); +#endif +} void via_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); -- cgit v1.2.3 From efaf6d28fc768bfa373f7377c4b0484cbdf9f67e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Aug 2011 21:02:22 +0200 Subject: m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq Signed-off-by: Geert Uytterhoeven Cc: Philip Blundell --- arch/m68k/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9ba1a89e0032..e4bd0c974643 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -91,7 +91,6 @@ config USE_GENERIC_HARDIRQS depends on !MVME147 depends on !MVME16x depends on !BVME6000 - depends on !HP300 depends on !SUN3X depends on !Q40 depends on !SUN3 -- cgit v1.2.3 From 6c490c4da4642ec9e7569c8b50a98a22c71ad184 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Aug 2011 21:11:00 +0200 Subject: m68k/vme: Convert VME to genirq Signed-off-by: Geert Uytterhoeven Cc: Richard Hirst --- arch/m68k/Kconfig | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index e4bd0c974643..8ae37a8fba40 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -88,9 +88,6 @@ config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU depends on !APOLLO - depends on !MVME147 - depends on !MVME16x - depends on !BVME6000 depends on !SUN3X depends on !Q40 depends on !SUN3 -- cgit v1.2.3 From bc7485acd09405d9544783d773ee040af4a5c861 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:45:57 +0200 Subject: m68k/apollo: Convert Apollo to genirq Replace the custom user vector interrupt handler that calls do_IRQ() and does an EOI by handle_fasteoi_irq(). Signed-off-by: Geert Uytterhoeven Cc: Peter De Schrijver --- arch/m68k/Kconfig | 1 - arch/m68k/apollo/dn_ints.c | 25 +++++++++++++++++++++++-- 2 files changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 8ae37a8fba40..f2dc708d3da9 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !APOLLO depends on !SUN3X depends on !Q40 depends on !SUN3 diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 4b764312aed0..fc190b34b621 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -1,9 +1,14 @@ #include - +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#else #include +#endif + #include #include +#ifndef CONFIG_GENERIC_HARDIRQS void dn_process_int(unsigned int irq, struct pt_regs *fp) { do_IRQ(irq, fp); @@ -11,6 +16,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(pica)=0x20; *(volatile unsigned char *)(picb)=0x20; } +#endif unsigned int apollo_irq_startup(struct irq_data *data) { @@ -33,16 +39,31 @@ void apollo_irq_shutdown(struct irq_data *data) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } +#ifdef CONFIG_GENERIC_HARDIRQS +void apollo_irq_eoi(struct irq_data *data) +{ + *(volatile unsigned char *)(pica) = 0x20; + *(volatile unsigned char *)(picb) = 0x20; +} +#endif + static struct irq_chip apollo_irq_chip = { .name = "apollo", .irq_startup = apollo_irq_startup, .irq_shutdown = apollo_irq_shutdown, +#ifdef CONFIG_GENERIC_HARDIRQS + .irq_eoi = apollo_irq_eoi, +#endif }; void __init dn_init_IRQ(void) { +#ifdef CONFIG_GENERIC_HARDIRQS + m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); +#else m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_controller(&apollo_irq_chip, handle_simple_irq, +#endif + m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } -- cgit v1.2.3 From 4045513286462a3c12140fac0559f09bcb5e7f10 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 22:46:01 +0200 Subject: m68k/sun3: Use the kstat_irqs_cpu() wrapper Signed-off-by: Geert Uytterhoeven Acked-by: Sam Creasey --- arch/m68k/sun3/sun3ints.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 20ffee7dc319..1273eb879a15 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -51,14 +51,19 @@ void sun3_disable_irq(unsigned int irq) static irqreturn_t sun3_int7(int irq, void *dev_id) { + unsigned int cnt; + *sun3_intreg |= (1 << irq); - if (!(kstat_cpu(0).irqs[irq] % 2000)) - sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]); + cnt = kstat_irqs_cpu(irq, 0); + if (!(cnt % 2000)) + sun3_leds(led_pattern[cnt % 16000 / 2000]); return IRQ_HANDLED; } static irqreturn_t sun3_int5(int irq, void *dev_id) { + unsigned int cnt; + #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -68,8 +73,9 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #endif xtime_update(1); update_process_times(user_mode(get_irq_regs())); - if (!(kstat_cpu(0).irqs[irq] % 20)) - sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]); + cnt = kstat_irqs_cpu(irq, 0); + if (!(cnt % 20)) + sun3_leds(led_pattern[cnt % 160 / 20]); return IRQ_HANDLED; } -- cgit v1.2.3 From dda7535912255015ecf7264c1d6691a09f8ba487 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:46:46 +0200 Subject: m68k/sun3: Convert Sun3/3x to genirq Replace the custom irq handler that masks the irq and calls do_IRQ(), and the unmasking in the individual handlers, by handle_level_irq(). Signed-off-by: Geert Uytterhoeven Cc: Sam Creasey --- arch/m68k/Kconfig | 2 -- arch/m68k/sun3/sun3ints.c | 16 ++++++++++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index f2dc708d3da9..290f9c838b35 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,9 +87,7 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !SUN3X depends on !Q40 - depends on !SUN3 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 1273eb879a15..626b601931e9 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -53,7 +53,9 @@ static irqreturn_t sun3_int7(int irq, void *dev_id) { unsigned int cnt; +#ifndef CONFIG_GENERIC_HARDIRQS *sun3_intreg |= (1 << irq); +#endif cnt = kstat_irqs_cpu(irq, 0); if (!(cnt % 2000)) sun3_leds(led_pattern[cnt % 16000 / 2000]); @@ -67,7 +69,9 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif +#ifndef CONFIG_GENERIC_HARDIRQS *sun3_intreg |= (1 << irq); +#endif #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -85,12 +89,14 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id) return IRQ_HANDLED; } +#ifndef CONFIG_GENERIC_HARDIRQS static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) { *sun3_intreg &= ~(1 << irq); do_IRQ(irq, fp); } +#endif static void sun3_irq_enable(struct irq_data *data) { @@ -108,15 +114,21 @@ static struct irq_chip sun3_irq_chip = { .irq_shutdown = m68k_irq_shutdown, .irq_enable = sun3_irq_enable, .irq_disable = sun3_irq_disable, +#ifdef CONFIG_GENERIC_HARDIRQS + .irq_mask = sun3_irq_disable, + .irq_unmask = sun3_irq_enable, +#endif }; void __init sun3_init_IRQ(void) { *sun3_intreg = 1; +#ifndef CONFIG_GENERIC_HARDIRQS m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_controller(&sun3_irq_chip, handle_simple_irq, - IRQ_AUTO_1, 7); +#endif + m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, + 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) -- cgit v1.2.3 From a03010ed9b399fdbc28ac8836e0a6d4b15403f9f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:47:16 +0200 Subject: m68k/q40: Convert Q40/Q60 to genirq q40_irq_handler() must be kept to translate ISA IRQs to the range 1-15. q40_probe_irq_o{ff,n}() become unused. Signed-off-by: Geert Uytterhoeven Cc: Richard Zidlicky --- arch/m68k/Kconfig | 1 - arch/m68k/include/asm/q40ints.h | 2 ++ arch/m68k/q40/q40ints.c | 8 +++++++- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 290f9c838b35..06198ced2245 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !Q40 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h index 3d970afb708f..01cdbb4da465 100644 --- a/arch/m68k/include/asm/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h @@ -25,5 +25,7 @@ #define Q40_IRQ14_MASK (1<<6) #define Q40_IRQ15_MASK (1<<7) +#ifndef CONFIG_GENERIC_HARDIRQS extern unsigned long q40_probe_irq_on (void); extern int q40_probe_irq_off (unsigned long irqs); +#endif diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index afe600c03659..f1e5288f043f 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -15,10 +15,14 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#else +#include +#endif #include #include -#include #include #include @@ -326,6 +330,7 @@ void q40_irq_disable(struct irq_data *data) } } +#ifndef CONFIG_GENERIC_HARDIRQS unsigned long q40_probe_irq_on(void) { printk("irq probing not working - reconfigure the driver to avoid this\n"); @@ -335,3 +340,4 @@ int q40_probe_irq_off(unsigned long irqs) { return -1; } +#endif -- cgit v1.2.3 From d890d73995257b4e10cdd7d55bad80e34a71ba22 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 11 Sep 2011 11:28:04 +0200 Subject: m68k/irq: Remove obsolete m68k irq framework Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 10 +- arch/m68k/amiga/amiints.c | 114 --------------- arch/m68k/apollo/dn_ints.c | 22 --- arch/m68k/include/asm/irq.h | 63 --------- arch/m68k/include/asm/q40ints.h | 5 - arch/m68k/kernel/Makefile | 10 +- arch/m68k/kernel/ints.c | 297 ---------------------------------------- arch/m68k/mac/baboon.c | 41 ------ arch/m68k/mac/oss.c | 78 ----------- arch/m68k/mac/psc.c | 44 ------ arch/m68k/mac/via.c | 104 -------------- arch/m68k/q40/q40ints.c | 16 --- arch/m68k/sun3/sun3ints.c | 20 --- 13 files changed, 4 insertions(+), 820 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 06198ced2245..361d54019bb0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -4,8 +4,8 @@ config M68K select HAVE_IDE select HAVE_AOUT if MMU select GENERIC_ATOMIC64 if MMU - select HAVE_GENERIC_HARDIRQS if !MMU - select GENERIC_IRQ_SHOW if !MMU + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS config RWSEM_GENERIC_SPINLOCK @@ -84,12 +84,6 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA -config USE_GENERIC_HARDIRQS - bool "Use genirq" - depends on MMU - select HAVE_GENERIC_HARDIRQS - select GENERIC_IRQ_SHOW - menu "Platform setup" source arch/m68k/Kconfig.cpu diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index a8da47126584..47b5f90002ab 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -9,9 +9,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -48,7 +46,6 @@ static struct irq_chip amiga_irq_chip = { * The builtin Amiga hardware interrupt handlers. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void ami_int1(unsigned int irq, struct irq_desc *desc) { unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; @@ -140,103 +137,6 @@ static void ami_int5(unsigned int irq, struct irq_desc *desc) generic_handle_irq(IRQ_AMIGA_DSKSYN); } } -#else /* !CONFIG_GENERIC_HARDIRQS */ -static irqreturn_t ami_int1(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial transmit buffer empty, interrupt */ - if (ints & IF_TBE) { - amiga_custom.intreq = IF_TBE; - generic_handle_irq(IRQ_AMIGA_TBE); - } - - /* if floppy disk transfer complete, interrupt */ - if (ints & IF_DSKBLK) { - amiga_custom.intreq = IF_DSKBLK; - generic_handle_irq(IRQ_AMIGA_DSKBLK); - } - - /* if software interrupt set, interrupt */ - if (ints & IF_SOFT) { - amiga_custom.intreq = IF_SOFT; - generic_handle_irq(IRQ_AMIGA_SOFT); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int3(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if a blitter interrupt */ - if (ints & IF_BLIT) { - amiga_custom.intreq = IF_BLIT; - generic_handle_irq(IRQ_AMIGA_BLIT); - } - - /* if a copper interrupt */ - if (ints & IF_COPER) { - amiga_custom.intreq = IF_COPER; - generic_handle_irq(IRQ_AMIGA_COPPER); - } - - /* if a vertical blank interrupt */ - if (ints & IF_VERTB) { - amiga_custom.intreq = IF_VERTB; - generic_handle_irq(IRQ_AMIGA_VERTB); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int4(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if audio 0 interrupt */ - if (ints & IF_AUD0) { - amiga_custom.intreq = IF_AUD0; - generic_handle_irq(IRQ_AMIGA_AUD0); - } - - /* if audio 1 interrupt */ - if (ints & IF_AUD1) { - amiga_custom.intreq = IF_AUD1; - generic_handle_irq(IRQ_AMIGA_AUD1); - } - - /* if audio 2 interrupt */ - if (ints & IF_AUD2) { - amiga_custom.intreq = IF_AUD2; - generic_handle_irq(IRQ_AMIGA_AUD2); - } - - /* if audio 3 interrupt */ - if (ints & IF_AUD3) { - amiga_custom.intreq = IF_AUD3; - generic_handle_irq(IRQ_AMIGA_AUD3); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int5(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial receive buffer full interrupt */ - if (ints & IF_RBF) { - /* acknowledge of IF_RBF must be done by the serial interrupt */ - generic_handle_irq(IRQ_AMIGA_RBF); - } - - /* if a disk sync interrupt */ - if (ints & IF_DSKSYN) { - amiga_custom.intreq = IF_DSKSYN; - generic_handle_irq(IRQ_AMIGA_DSKSYN); - } - return IRQ_HANDLED; -} -#endif /* !CONFIG_GENERIC_HARDIRQS */ /* @@ -252,7 +152,6 @@ static irqreturn_t ami_int5(int irq, void *dev_id) void __init amiga_init_IRQ(void) { -#ifdef CONFIG_GENERIC_HARDIRQS m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, AMI_STD_IRQS); @@ -260,19 +159,6 @@ void __init amiga_init_IRQ(void) irq_set_chained_handler(IRQ_AUTO_3, ami_int3); irq_set_chained_handler(IRQ_AUTO_4, ami_int4); irq_set_chained_handler(IRQ_AUTO_5, ami_int5); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) - pr_err("Couldn't register int%d\n", 1); - if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) - pr_err("Couldn't register int%d\n", 3); - if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) - pr_err("Couldn't register int%d\n", 4); - if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) - pr_err("Couldn't register int%d\n", 5); - - m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, - AMI_STD_IRQS); -#endif /* !CONFIG_GENERIC_HARDIRQS */ /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index fc190b34b621..b7d0aa37d199 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -1,23 +1,9 @@ #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#else -#include -#endif #include #include -#ifndef CONFIG_GENERIC_HARDIRQS -void dn_process_int(unsigned int irq, struct pt_regs *fp) -{ - do_IRQ(irq, fp); - - *(volatile unsigned char *)(pica)=0x20; - *(volatile unsigned char *)(picb)=0x20; -} -#endif - unsigned int apollo_irq_startup(struct irq_data *data) { unsigned int irq = data->irq; @@ -39,31 +25,23 @@ void apollo_irq_shutdown(struct irq_data *data) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } -#ifdef CONFIG_GENERIC_HARDIRQS void apollo_irq_eoi(struct irq_data *data) { *(volatile unsigned char *)(pica) = 0x20; *(volatile unsigned char *)(picb) = 0x20; } -#endif static struct irq_chip apollo_irq_chip = { .name = "apollo", .irq_startup = apollo_irq_startup, .irq_shutdown = apollo_irq_shutdown, -#ifdef CONFIG_GENERIC_HARDIRQS .irq_eoi = apollo_irq_eoi, -#endif }; void __init dn_init_IRQ(void) { -#ifdef CONFIG_GENERIC_HARDIRQS m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); -#else - m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); -#endif m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 518e61f2fccb..94349a525bc2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -62,67 +62,6 @@ #define IRQ_FLG_STD (0x8000) /* internally used */ #endif -#ifndef CONFIG_GENERIC_HARDIRQS - -#include -#include -#include -#include - -struct pt_regs; - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -struct irq_data { - unsigned int irq; - irqreturn_t (*handler)(int, void *); - void *dev_id; - struct irq_data *next; - unsigned long flags; - const char *devname; -}; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_chip { - const char *name; - unsigned int (*irq_startup)(struct irq_data *data); - void (*irq_shutdown)(struct irq_data *data); - void (*irq_enable)(struct irq_data *data); - void (*irq_disable)(struct irq_data *data); -}; - -extern unsigned int m68k_irq_startup(struct irq_data *data); -extern unsigned int m68k_irq_startup_irq(unsigned int irq); -extern void m68k_irq_shutdown(struct irq_data *data); - -/* - * This function returns a new struct irq_data - */ -extern struct irq_data *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); -#define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ - m68k_setup_irq_chip((chip), (irq), (cnt)) - -extern void generic_handle_irq(unsigned int); -asmlinkage void do_IRQ(int irq, struct pt_regs *regs); - -#else /* CONFIG_GENERIC_HARDIRQS */ - struct irq_data; struct irq_chip; struct irq_desc; @@ -139,8 +78,6 @@ extern void m68k_setup_irq_controller(struct irq_chip *, struct irq_desc *desc), unsigned int irq, unsigned int cnt); -#endif /* CONFIG_GENERIC_HARDIRQS */ - extern unsigned int irq_canonicalize(unsigned int irq); #else diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h index 01cdbb4da465..22f12c9eb910 100644 --- a/arch/m68k/include/asm/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h @@ -24,8 +24,3 @@ #define Q40_IRQ10_MASK (1<<5) #define Q40_IRQ14_MASK (1<<6) #define Q40_IRQ15_MASK (1<<7) - -#ifndef CONFIG_GENERIC_HARDIRQS -extern unsigned long q40_probe_irq_on (void); -extern int q40_probe_irq_off (unsigned long irqs); -#endif diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 141425785c4e..c5696193281a 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -6,11 +6,10 @@ extra-$(CONFIG_MMU) := head.o extra-$(CONFIG_SUN3) := sun3-head.o extra-y += vmlinux.lds -obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ - sys_m68k.o syscalltable.o time.o traps.o +obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \ + signal.o sys_m68k.o syscalltable.o time.o traps.o obj-$(CONFIG_MMU) += ints.o vectors.o -devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o @@ -18,9 +17,4 @@ endif ifndef CONFIG_MMU obj-y += init_task.o endif -ifdef CONFIG_GENERIC_HARDIRQS -obj-y += irq.o -else -obj-y += devres.o -endif diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index cea439f9819b..e2b056b3a314 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -31,20 +31,6 @@ extern u32 auto_irqhandler_fixup[]; extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; -#ifndef CONFIG_GENERIC_HARDIRQS -/* table for system interrupt handlers */ -static struct irq_data *irq_list[NR_IRQS]; -static struct irq_chip *irq_chip[NR_IRQS]; -static int irq_depth[NR_IRQS]; - -static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) -{ - irq_chip[irq] = chip; - return 0; -} -#define irq_set_chip_and_handler(irq, chip, dummy) irq_set_chip(irq, chip) -#endif /* !CONFIG_GENERIC_HARDIRQS */ - static int m68k_first_user_vec; static struct irq_chip auto_irq_chip = { @@ -59,11 +45,6 @@ static struct irq_chip user_irq_chip = { .irq_shutdown = m68k_irq_shutdown, }; -#ifndef CONFIG_GENERIC_HARDIRQS -#define NUM_IRQ_NODES 100 -static struct irq_data nodes[NUM_IRQ_NODES]; -#endif /* !CONFIG_GENERIC_HARDIRQS */ - /* * void init_IRQ(void) * @@ -133,8 +114,6 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, flush_icache(); } -#ifdef CONFIG_GENERIC_HARDIRQS - /** * m68k_setup_irq_controller * @chip: irq chip which controls specified irq @@ -160,198 +139,6 @@ void m68k_setup_irq_controller(struct irq_chip *chip, } } -#else /* !CONFIG_GENERIC_HARDIRQS */ - -/** - * m68k_setup_irq_chip - * @contr: irq controller which controls specified irq - * @irq: first irq to be managed by the controller - * - * Change the controller for the specified range of irq, which will be used to - * manage these irq. auto/user irq already have a default controller, which can - * be changed as well, but the controller probably should use m68k_irq_startup/ - * m68k_irq_shutdown. - */ -void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, - unsigned int cnt) -{ - int i; - - for (i = 0; i < cnt; i++) - irq_set_chip(irq + i, contr); -} - -struct irq_data *new_irq_node(void) -{ - struct irq_data *node; - short i; - - for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { - if (!node->handler) { - memset(node, 0, sizeof(*node)); - return node; - } - } - - printk ("new_irq_node: out of nodes\n"); - return NULL; -} - -static int m68k_setup_irq(unsigned int irq, struct irq_data *node) -{ - struct irq_chip *contr; - struct irq_data **prev; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d from %s\n", - __func__, irq, node->devname); - return -ENXIO; - } - - local_irq_save(flags); - - prev = irq_list + irq; - if (*prev) { - /* Can't share interrupts unless both agree to */ - if (!((*prev)->flags & node->flags & IRQF_SHARED)) { - local_irq_restore(flags); - return -EBUSY; - } - while (*prev) - prev = &(*prev)->next; - } - - if (!irq_list[irq]) { - if (contr->irq_startup) - contr->irq_startup(node); - else - contr->irq_enable(node); - } - node->next = NULL; - *prev = node; - - local_irq_restore(flags); - - return 0; -} - -int request_irq(unsigned int irq, - irq_handler_t handler, - unsigned long flags, const char *devname, void *dev_id) -{ - struct irq_data *node; - int res; - - node = new_irq_node(); - if (!node) - return -ENOMEM; - - node->irq = irq; - node->handler = handler; - node->flags = flags; - node->dev_id = dev_id; - node->devname = devname; - - res = m68k_setup_irq(irq, node); - if (res) - node->handler = NULL; - - return res; -} - -EXPORT_SYMBOL(request_irq); - -void free_irq(unsigned int irq, void *dev_id) -{ - struct irq_chip *contr; - struct irq_data **p, *node; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", __func__, irq); - return; - } - - local_irq_save(flags); - - p = irq_list + irq; - while ((node = *p)) { - if (node->dev_id == dev_id) - break; - p = &node->next; - } - - if (node) { - *p = node->next; - node->handler = NULL; - } else - printk("%s: Removing probably wrong IRQ %d\n", - __func__, irq); - - if (!irq_list[irq]) { - if (contr->irq_shutdown) - contr->irq_shutdown(node); - else - contr->irq_disable(node); - } - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(free_irq); - -void enable_irq(unsigned int irq) -{ - struct irq_chip *contr; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", - __func__, irq); - return; - } - - local_irq_save(flags); - if (irq_depth[irq]) { - if (!--irq_depth[irq]) { - if (contr->irq_enable) - contr->irq_enable(irq_list[irq]); - } - } else - WARN_ON(1); - local_irq_restore(flags); -} - -EXPORT_SYMBOL(enable_irq); - -void disable_irq(unsigned int irq) -{ - struct irq_chip *contr; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", - __func__, irq); - return; - } - - local_irq_save(flags); - if (!irq_depth[irq]++) { - if (contr->irq_disable) - contr->irq_disable(irq_list[irq]); - } - local_irq_restore(flags); -} - -EXPORT_SYMBOL(disable_irq); - -void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); - -EXPORT_SYMBOL(disable_irq_nosync); - -#endif /* !CONFIG_GENERIC_HARDIRQS */ - unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) @@ -377,36 +164,6 @@ void m68k_irq_shutdown(struct irq_data *data) } -#ifndef CONFIG_GENERIC_HARDIRQS - -/* - * Do we need these probe functions on the m68k? - * - * ... may be useful with ISA devices - */ -unsigned long probe_irq_on (void) -{ -#ifdef CONFIG_Q40 - if (MACH_IS_Q40) - return q40_probe_irq_on(); -#endif - return 0; -} - -EXPORT_SYMBOL(probe_irq_on); - -int probe_irq_off (unsigned long irqs) -{ -#ifdef CONFIG_Q40 - if (MACH_IS_Q40) - return q40_probe_irq_off(irqs); -#endif - return 0; -} - -EXPORT_SYMBOL(probe_irq_off); -#endif /* CONFIG_GENERIC_HARDIRQS */ - unsigned int irq_canonicalize(unsigned int irq) { #ifdef CONFIG_Q40 @@ -418,63 +175,9 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); -#ifndef CONFIG_GENERIC_HARDIRQS -void generic_handle_irq(unsigned int irq) -{ - struct irq_data *node; - kstat_cpu(0).irqs[irq]++; - node = irq_list[irq]; - do { - node->handler(irq, node->dev_id); - node = node->next; - } while (node); -} - -asmlinkage void do_IRQ(int irq, struct pt_regs *regs) -{ - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - generic_handle_irq(irq); - set_irq_regs(old_regs); -} - -asmlinkage void handle_badint(struct pt_regs *regs) -{ - kstat_cpu(0).irqs[0]++; - printk("unexpected interrupt from %u\n", regs->vector); -} - -int show_interrupts(struct seq_file *p, void *v) -{ - struct irq_chip *contr; - struct irq_data *node; - int i = *(loff_t *) v; - - /* autovector interrupts */ - if (irq_list[i]) { - contr = irq_chip[i]; - node = irq_list[i]; - seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname); - while ((node = node->next)) - seq_printf(p, ", %s", node->devname); - seq_puts(p, "\n"); - } - return 0; -} - -#ifdef CONFIG_PROC_FS -void init_irq_proc(void) -{ - /* Insert /proc/irq driver here */ -} -#endif - -#else /* CONFIG_GENERIC_HARDIRQS */ asmlinkage void handle_badint(struct pt_regs *regs) { atomic_inc(&irq_err_count); pr_warn("unexpected interrupt from %u\n", regs->vector); } - -#endif /* CONFIG_GENERIC_HARDIRQS */ diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index 425144cbfa7d..b55ead284971 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -11,9 +11,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -56,7 +54,6 @@ void __init baboon_init(void) * Baboon interrupt handler. This works a lot like a VIA. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void baboon_irq(unsigned int irq, struct irq_desc *desc) { int irq_bit, irq_num; @@ -88,39 +85,6 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc) baboon->mb_ifr &= ~events; #endif } -#else -static irqreturn_t baboon_irq(int irq, void *dev_id) -{ - int irq_bit, irq_num; - unsigned char events; - -#ifdef DEBUG_IRQS - printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n", - (uint) baboon->mb_control, (uint) baboon->mb_ifr, - (uint) baboon->mb_status); -#endif - - if (!(events = baboon->mb_ifr & 0x07)) - return IRQ_NONE; - - irq_num = IRQ_BABOON_0; - irq_bit = 1; - do { - if (events & irq_bit) { - baboon->mb_ifr &= ~irq_bit; - generic_handle_irq(irq_num); - } - irq_bit <<= 1; - irq_num++; - } while(events >= irq_bit); -#if 0 - if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL); - /* for now we need to smash all interrupts */ - baboon->mb_ifr &= ~events; -#endif - return IRQ_HANDLED; -} -#endif /* * Register the Baboon interrupt dispatcher on nubus slot $C. @@ -129,12 +93,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) void __init baboon_register_interrupts(void) { baboon_disabled = 0; -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); -#else - if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon)) - pr_err("Couldn't register baboon interrupt\n"); -#endif } /* diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index cc784c2ff6e8..a4c82dab9ff1 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -19,9 +19,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -32,11 +30,7 @@ int oss_present; volatile struct mac_oss *oss; -#ifdef CONFIG_GENERIC_HARDIRQS extern void via1_irq(unsigned int irq, struct irq_desc *desc); -#else -extern irqreturn_t via1_irq(int, void *); -#endif /* * Initialize the OSS @@ -76,7 +70,6 @@ void __init oss_nubus_init(void) * and SCSI; everything else is routed to its own autovector IRQ. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void oss_irq(unsigned int irq, struct irq_desc *desc) { int events; @@ -103,35 +96,6 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc) /* FIXME: error check here? */ } } -#else -static irqreturn_t oss_irq(int irq, void *dev_id) -{ - int events; - - events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); - if (!events) - return IRQ_NONE; - -#ifdef DEBUG_IRQS - if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { - printk("oss_irq: irq %d events = 0x%04X\n", irq, - (int) oss->irq_pending); - } -#endif - /* FIXME: how do you clear a pending IRQ? */ - - if (events & OSS_IP_SOUND) { - oss->irq_pending &= ~OSS_IP_SOUND; - /* FIXME: call sound handler */ - } else if (events & OSS_IP_SCSI) { - oss->irq_pending &= ~OSS_IP_SCSI; - generic_handle_irq(IRQ_MAC_SCSI); - } else { - /* FIXME: error check here? */ - } - return IRQ_HANDLED; -} -#endif /* * Nubus IRQ handler, OSS style @@ -139,7 +103,6 @@ static irqreturn_t oss_irq(int irq, void *dev_id) * Unlike the VIA/RBV this is on its own autovector interrupt level. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) { int events, irq_bit, i; @@ -166,35 +129,6 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) } } while(events & (irq_bit - 1)); } -#else -static irqreturn_t oss_nubus_irq(int irq, void *dev_id) -{ - int events, irq_bit, i; - - events = oss->irq_pending & OSS_IP_NUBUS; - if (!events) - return IRQ_NONE; - -#ifdef DEBUG_NUBUS_INT - if (console_loglevel > 7) { - printk("oss_nubus_irq: events = 0x%04X\n", events); - } -#endif - /* There are only six slots on the OSS, not seven */ - - i = 6; - irq_bit = 0x40; - do { - --i; - irq_bit >>= 1; - if (events & irq_bit) { - oss->irq_pending &= ~irq_bit; - generic_handle_irq(NUBUS_SOURCE_BASE + i); - } - } while(events & (irq_bit - 1)); - return IRQ_HANDLED; -} -#endif /* * Register the OSS and NuBus interrupt dispatchers. @@ -202,22 +136,10 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) void __init oss_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", - (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); -#endif /* !CONFIG_GENERIC_HARDIRQS */ } /* diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 52840b8c03b8..e6c2d20f328d 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -18,9 +18,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -116,7 +114,6 @@ void __init psc_init(void) * PSC interrupt handler. It's a lot like the VIA interrupt handler. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void psc_irq(unsigned int irq, struct irq_desc *desc) { unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc); @@ -145,36 +142,6 @@ static void psc_irq(unsigned int irq, struct irq_desc *desc) irq_bit <<= 1; } while (events >= irq_bit); } -#else -static irqreturn_t psc_irq(int irq, void *dev_id) -{ - int pIFR = pIFRbase + ((int) dev_id); - int pIER = pIERbase + ((int) dev_id); - int irq_num; - unsigned char irq_bit, events; - -#ifdef DEBUG_IRQS - printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n", - irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); -#endif - - events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; - if (!events) - return IRQ_NONE; - - irq_num = irq << 3; - irq_bit = 1; - do { - if (events & irq_bit) { - psc_write_byte(pIFR, irq_bit); - generic_handle_irq(irq_num); - } - irq_num++; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} -#endif /* * Register the PSC interrupt dispatchers for autovector interrupts 3-6. @@ -182,7 +149,6 @@ static irqreturn_t psc_irq(int irq, void *dev_id) void __init psc_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(IRQ_AUTO_3, psc_irq); irq_set_handler_data(IRQ_AUTO_3, (void *)0x30); irq_set_chained_handler(IRQ_AUTO_4, psc_irq); @@ -191,16 +157,6 @@ void __init psc_register_interrupts(void) irq_set_handler_data(IRQ_AUTO_5, (void *)0x50); irq_set_chained_handler(IRQ_AUTO_6, psc_irq); irq_set_handler_data(IRQ_AUTO_6, (void *)0x60); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) - pr_err("Couldn't register psc%d interrupt\n", 3); - if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) - pr_err("Couldn't register psc%d interrupt\n", 4); - if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) - pr_err("Couldn't register psc%d interrupt\n", 5); - if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) - pr_err("Couldn't register psc%d interrupt\n", 6); -#endif /* !CONFIG_GENERIC_HARDIRQS */ } void psc_irq_enable(int irq) { diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index b8156ac496a0..f1600ad26621 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -28,9 +28,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -417,7 +415,6 @@ void __init via_nubus_init(void) * via6522.c :-), disable/pending masks added. */ -#ifdef CONFIG_GENERIC_HARDIRQS void via1_irq(unsigned int irq, struct irq_desc *desc) { int irq_num; @@ -459,58 +456,12 @@ static void via2_irq(unsigned int irq, struct irq_desc *desc) irq_bit <<= 1; } while (events >= irq_bit); } -#else -irqreturn_t via1_irq(int irq, void *dev_id) -{ - int irq_num; - unsigned char irq_bit, events; - - events = via1[vIFR] & via1[vIER] & 0x7F; - if (!events) - return IRQ_NONE; - - irq_num = VIA1_SOURCE_BASE; - irq_bit = 1; - do { - if (events & irq_bit) { - via1[vIFR] = irq_bit; - generic_handle_irq(irq_num); - } - ++irq_num; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} - -irqreturn_t via2_irq(int irq, void *dev_id) -{ - int irq_num; - unsigned char irq_bit, events; - - events = via2[gIFR] & via2[gIER] & 0x7F; - if (!events) - return IRQ_NONE; - - irq_num = VIA2_SOURCE_BASE; - irq_bit = 1; - do { - if (events & irq_bit) { - via2[gIFR] = irq_bit | rbv_clear; - generic_handle_irq(irq_num); - } - ++irq_num; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} -#endif /* * Dispatch Nubus interrupts. We are called as a secondary dispatch by the * VIA2 dispatcher as a fast interrupt handler. */ -#ifdef CONFIG_GENERIC_HARDIRQS void via_nubus_irq(unsigned int irq, struct irq_desc *desc) { int slot_irq; @@ -545,43 +496,6 @@ void via_nubus_irq(unsigned int irq, struct irq_desc *desc) events &= ~via2[vDirA]; } while (events); } -#else -irqreturn_t via_nubus_irq(int irq, void *dev_id) -{ - int slot_irq; - unsigned char slot_bit, events; - - events = ~via2[gBufA] & 0x7F; - if (rbv_present) - events &= via2[rSIER]; - else - events &= ~via2[vDirA]; - if (!events) - return IRQ_NONE; - - do { - slot_irq = IRQ_NUBUS_F; - slot_bit = 0x40; - do { - if (events & slot_bit) { - events &= ~slot_bit; - generic_handle_irq(slot_irq); - } - --slot_irq; - slot_bit >>= 1; - } while (events); - - /* clear the CA1 interrupt and make certain there's no more. */ - via2[gIFR] = 0x02 | rbv_clear; - events = ~via2[gBufA] & 0x7F; - if (rbv_present) - events &= via2[rSIER]; - else - events &= ~via2[vDirA]; - } while (events); - return IRQ_HANDLED; -} -#endif /* * Register the interrupt dispatchers for VIA or RBV machines only. @@ -589,7 +503,6 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) void __init via_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS if (via_alt_mapping) { /* software interrupt */ irq_set_chained_handler(IRQ_AUTO_1, via1_irq); @@ -600,23 +513,6 @@ void __init via_register_interrupts(void) } irq_set_chained_handler(IRQ_AUTO_2, via2_irq); irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq); -#else - if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", - (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } else { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } - if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", - (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "nubus"); -#endif } void via_irq_enable(int irq) { diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index f1e5288f043f..2b888491f29a 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -15,11 +15,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#else -#include -#endif #include #include @@ -329,15 +325,3 @@ void q40_irq_disable(struct irq_data *data) printk("disable_irq nesting count %d\n",mext_disabled); } } - -#ifndef CONFIG_GENERIC_HARDIRQS -unsigned long q40_probe_irq_on(void) -{ - printk("irq probing not working - reconfigure the driver to avoid this\n"); - return -1; -} -int q40_probe_irq_off(unsigned long irqs) -{ - return -1; -} -#endif diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 626b601931e9..7eb378195cf7 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -53,9 +53,6 @@ static irqreturn_t sun3_int7(int irq, void *dev_id) { unsigned int cnt; -#ifndef CONFIG_GENERIC_HARDIRQS - *sun3_intreg |= (1 << irq); -#endif cnt = kstat_irqs_cpu(irq, 0); if (!(cnt % 2000)) sun3_leds(led_pattern[cnt % 16000 / 2000]); @@ -69,9 +66,6 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif -#ifndef CONFIG_GENERIC_HARDIRQS - *sun3_intreg |= (1 << irq); -#endif #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -89,15 +83,6 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id) return IRQ_HANDLED; } -#ifndef CONFIG_GENERIC_HARDIRQS -static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) -{ - *sun3_intreg &= ~(1 << irq); - - do_IRQ(irq, fp); -} -#endif - static void sun3_irq_enable(struct irq_data *data) { sun3_enable_irq(data->irq); @@ -114,19 +99,14 @@ static struct irq_chip sun3_irq_chip = { .irq_shutdown = m68k_irq_shutdown, .irq_enable = sun3_irq_enable, .irq_disable = sun3_irq_disable, -#ifdef CONFIG_GENERIC_HARDIRQS .irq_mask = sun3_irq_disable, .irq_unmask = sun3_irq_enable, -#endif }; void __init sun3_init_IRQ(void) { *sun3_intreg = 1; -#ifndef CONFIG_GENERIC_HARDIRQS - m68k_setup_auto_interrupt(sun3_inthandle); -#endif m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); -- cgit v1.2.3 From f30a6484f1bcb410d0af0c24f34b8e3d92682a05 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 11 Sep 2011 11:54:50 +0200 Subject: m68k/irq: Remove obsolete support for user vector interrupt fixups It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven --- arch/m68k/apollo/dn_ints.c | 2 +- arch/m68k/atari/ataints.c | 2 +- arch/m68k/bvme6000/config.c | 2 +- arch/m68k/include/asm/irq.h | 4 +--- arch/m68k/kernel/entry_mm.S | 3 +-- arch/m68k/kernel/ints.c | 11 ++--------- arch/m68k/mvme147/config.c | 2 +- arch/m68k/mvme16x/config.c | 2 +- arch/m68k/sun3/sun3ints.c | 2 +- 9 files changed, 10 insertions(+), 20 deletions(-) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index b7d0aa37d199..17be1e7e2df2 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -41,7 +41,7 @@ static struct irq_chip apollo_irq_chip = { void __init dn_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); + m68k_setup_user_interrupt(VEC_USER + 96, 16); m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index af544557dd1d..6d196dadfdbc 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -137,7 +137,7 @@ static struct irq_chip atari_irq_chip = { void __init atari_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); + m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER); m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, NUM_ATARI_SOURCES - 1); diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 1edd95095cb4..81286476f740 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -86,7 +86,7 @@ static void bvme6000_get_model(char *model) */ static void __init bvme6000_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } void __init config_bvme6000(void) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 94349a525bc2..6198df5ff245 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -70,9 +70,7 @@ extern unsigned int m68k_irq_startup_irq(unsigned int irq); extern void m68k_irq_shutdown(struct irq_data *data); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, - struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt); extern void m68k_setup_irq_controller(struct irq_chip *, void (*handle)(unsigned int irq, struct irq_desc *desc), diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index f5927d0927b4..c713f514843d 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -48,7 +48,7 @@ .globl sys_fork, sys_clone, sys_vfork .globl ret_from_interrupt, bad_interrupt .globl auto_irqhandler_fixup -.globl user_irqvec_fixup, user_irqhandler_fixup +.globl user_irqvec_fixup .text ENTRY(buserr) @@ -240,7 +240,6 @@ user_irqvec_fixup = . + 2 movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack -user_irqhandler_fixup = . + 2 jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index e2b056b3a314..74fefac00899 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -28,7 +28,6 @@ #endif extern u32 auto_irqhandler_fixup[]; -extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; static int m68k_first_user_vec; @@ -91,16 +90,12 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re * m68k_setup_user_interrupt * @vec: first user vector interrupt to handle * @cnt: number of active user vector interrupts - * @handler: called from user vector interrupts * * setup user vector interrupts, this includes activating the specified range * of interrupts, only then these interrupts can be requested (note: this is - * different from auto vector interrupts). An optional handler can be installed - * to be called instead of the default do_IRQ(), it will be called - * with irq numbers starting from IRQ_USER. + * different from auto vector interrupts). */ -void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)) +void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt) { int i; @@ -109,8 +104,6 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, for (i = 0; i < cnt; i++) irq_set_chip(IRQ_USER + i, &user_irq_chip); *user_irqvec_fixup = vec - IRQ_USER; - if (handler) - *user_irqhandler_fixup = (u32)handler; flush_icache(); } diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 01f2adf3f19f..5de924ef42ed 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -81,7 +81,7 @@ static void mvme147_get_model(char *model) void __init mvme147_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } void __init config_mvme147(void) diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index 0b28e2621653..31a66d99cbca 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -117,7 +117,7 @@ static void mvme16x_get_hardware_list(struct seq_file *m) static void __init mvme16x_init_IRQ (void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } #define pcc2chip ((volatile u_char *)0xfff42000) diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 7eb378195cf7..78b60f53e90a 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -109,7 +109,7 @@ void __init sun3_init_IRQ(void) m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, 7); - m68k_setup_user_interrupt(VEC_USER, 128, NULL); + m68k_setup_user_interrupt(VEC_USER, 128); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) pr_err("Couldn't register %s interrupt\n", "int5"); -- cgit v1.2.3 From 2690e2148b730c53acb8797821468d0ea1673f25 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sun, 11 Sep 2011 23:40:50 +1000 Subject: m68k/mac: Remove mac_irq_{en,dis}able() wrappers Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/macintosh.h | 2 ++ arch/m68k/mac/baboon.c | 7 ++----- arch/m68k/mac/macints.c | 25 +++++++------------------ 3 files changed, 11 insertions(+), 23 deletions(-) diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index c2a1c5eac1a6..12ebe43b008b 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -12,6 +12,8 @@ extern void mac_reset(void); extern void mac_poweroff(void); extern void mac_init_IRQ(void); extern int mac_irq_pending(unsigned int); +extern void mac_irq_enable(struct irq_data *data); +extern void mac_irq_disable(struct irq_data *data); /* * Floppy driver magic hook - probably shouldn't be here diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index b55ead284971..b403924a1cad 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -21,9 +21,6 @@ /* #define DEBUG_IRQS */ -extern void mac_enable_irq(unsigned int); -extern void mac_disable_irq(unsigned int); - int baboon_present; static volatile struct baboon *baboon; static unsigned char baboon_disabled; @@ -111,7 +108,7 @@ void baboon_irq_enable(int irq) baboon_disabled &= ~(1 << irq_idx); if (!baboon_disabled) - mac_enable_irq(IRQ_NUBUS_C); + mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_disable(int irq) @@ -124,7 +121,7 @@ void baboon_irq_disable(int irq) baboon_disabled |= 1 << irq_idx; if (baboon_disabled) - mac_disable_irq(IRQ_NUBUS_C); + mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_clear(int irq) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 98497d288a9b..ba220b70ab8c 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -190,19 +190,6 @@ irqreturn_t mac_debug_handler(int, void *); /* #define DEBUG_MACINTS */ -void mac_enable_irq(unsigned int irq); -void mac_disable_irq(unsigned int irq); - -static void mac_irq_enable(struct irq_data *data) -{ - mac_enable_irq(data->irq); -} - -static void mac_irq_disable(struct irq_data *data) -{ - mac_disable_irq(data->irq); -} - static struct irq_chip mac_irq_chip = { .name = "mac", .irq_enable = mac_irq_enable, @@ -250,16 +237,17 @@ void __init mac_init_IRQ(void) } /* - * mac_enable_irq - enable an interrupt source - * mac_disable_irq - disable an interrupt source + * mac_irq_enable - enable an interrupt source + * mac_irq_disable - disable an interrupt source * mac_clear_irq - clears a pending interrupt - * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending) + * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending) * * These routines are just dispatchers to the VIA/OSS/PSC routines. */ -void mac_enable_irq(unsigned int irq) +void mac_irq_enable(struct irq_data *data) { + int irq = data->irq; int irq_src = IRQ_SRC(irq); switch(irq_src) { @@ -292,8 +280,9 @@ void mac_enable_irq(unsigned int irq) } } -void mac_disable_irq(unsigned int irq) +void mac_irq_disable(struct irq_data *data) { + int irq = data->irq; int irq_src = IRQ_SRC(irq); switch(irq_src) { -- cgit v1.2.3 From 6d2dd054295e26dad0a84e2fe2029a1428242f8b Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Mon, 31 Oct 2011 23:50:16 -0200 Subject: [libata] libata-scsi.c: Add function parameter documentation Add the documentation of parameters of ata_change_queue_depth to silence the warning of make xmldocs Signed-off-by: Marcos paulo de Souza Acked-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 72a9770ac42f..2a5412e7e9c1 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1217,6 +1217,10 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev) /** * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth + * @ap: ATA port to which the device change the queue depth + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * @reason: calling context * * libsas and libata have different approaches for associating a sdev to * its ata_port. -- cgit v1.2.3 From 003456145f0d23b73f080abd1fd7981788438693 Mon Sep 17 00:00:00 2001 From: JiSheng Zhang Date: Mon, 31 Oct 2011 21:20:10 +0800 Subject: ahci_platform: use dev_get_platdata() Use dev_get_platdata() to retrieve the struct ahci_platform_data data from the platform. Signed-off-by: JiSheng Zhang Signed-off-by: Jeff Garzik --- drivers/ata/ahci_platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 004f2ce3dc73..ec555951176e 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -65,7 +65,7 @@ static struct scsi_host_template ahci_platform_sht = { static int __init ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev->platform_data; + struct ahci_platform_data *pdata = dev_get_platdata(dev); const struct platform_device_id *id = platform_get_device_id(pdev); struct ata_port_info pi = ahci_port_info[id->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -191,7 +191,7 @@ err0: static int __devexit ahci_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev->platform_data; + struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); -- cgit v1.2.3 From 142924cf402f9c0568004f0e2a27988fe3556c61 Mon Sep 17 00:00:00 2001 From: Chris Dunlop Date: Mon, 24 Oct 2011 10:38:18 +1100 Subject: sata_sis.c: trivial spelling fix Trivial spelling fix. Signed-off-by: Chris Dunlop Signed-off-by: Jeff Garzik --- drivers/ata/sata_sis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 447d9c05fb5a..95ec435f0eb4 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -104,7 +104,7 @@ static const struct ata_port_info sis_port_info = { }; MODULE_AUTHOR("Uwe Koziolek"); -MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); +MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_VERSION(DRV_VERSION); -- cgit v1.2.3 From 7a46c0780babea7d0b3f277a33ea243be38eb942 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Wed, 19 Oct 2011 17:17:02 -0700 Subject: [libata] Issue SRST to Sil3726 PMP Reenable sending SRST to devices connected behind a Sil3726 PMP. This allow staggered spinups and handles drives that spins up slowly. While the drives spin up, the PMP will not accept SRST. Most controller reissues the reset until the drive is ready, while some [Sil3124] returns an error. In ata_eh_error, wait 10s before reset the ATA port and try again. Signed-off-by: Gwendal Grignou Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 12 +++++++++++- drivers/ata/libata-pmp.c | 7 ++----- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f22957c2769a..a9b282038000 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2883,7 +2883,7 @@ int ata_eh_reset(struct ata_link *link, int classify, sata_scr_read(link, SCR_STATUS, &sstatus)) rc = -ERESTART; - if (rc == -ERESTART || try >= max_tries) { + if (try >= max_tries) { /* * Thaw host port even if reset failed, so that the port * can be retried on the next phy event. This risks @@ -2909,6 +2909,16 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_acquire(ap); } + /* + * While disks spinup behind PMP, some controllers fail sending SRST. + * They need to be reset - as well as the PMP - before retrying. + */ + if (rc == -ERESTART) { + if (ata_is_host_link(link)) + ata_eh_thaw_port(ap); + goto out; + } + if (try == max_tries - 1) { sata_down_spd_limit(link, 0); if (slave) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 104462dbc524..21b80c555c60 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -389,12 +389,9 @@ static void sata_pmp_quirks(struct ata_port *ap) /* link reports offline after LPM */ link->flags |= ATA_LFLAG_NO_LPM; - /* Class code report is unreliable and SRST - * times out under certain configurations. - */ + /* Class code report is unreliable. */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_NO_SRST | - ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) -- cgit v1.2.3 From c9703765f3d5ab27909011dee4a05affe48e4442 Mon Sep 17 00:00:00 2001 From: Keng-Yu Lin Date: Wed, 9 Nov 2011 01:47:36 -0500 Subject: [libata] ahci: Add ASMedia ASM1061 support Signed-off-by: Keng-Yu Lin Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 3 +++ include/linux/pci_ids.h | 2 ++ 2 files changed, 5 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fb7b90b05922..cf26222a93c5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -390,6 +390,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Asmedia */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3fdf251389de..172ba70306d1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2405,6 +2405,8 @@ #define PCI_VENDOR_ID_AZWAVE 0x1a3b +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 -- cgit v1.2.3 From 8d1c963a2e0c57dfe7f9c356389902e500cf1cfd Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 8 Nov 2011 20:37:26 +0100 Subject: ALSA: HDA: Remove quirk for Toshiba T110 According to the bug reporter, model=auto is needed to make the internal microphone work. BugLink: https://bugs.launchpad.net/bugs/819699 Reported-by: Andrej (agno01) Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 5e706e4d1737..0de21193a2b0 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3062,7 +3062,6 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS), SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), - SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5066_LAPTOP), SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), -- cgit v1.2.3 From 0836b5cdd23d573bf7ec57f73ff774b3ad660bf4 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 4 Nov 2011 01:13:20 +0000 Subject: ARM: picoxcell: add extra temp register to addruart 639da5ee3 (ARM: add an extra temp register to the low level debugging addruart macro) didn't include picoxcell as it hadn't been merged at the time. Fix up the compile breakage by adding the extra temp parameter. Signed-off-by: Jamie Iles --- arch/arm/mach-picoxcell/include/mach/debug-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S index 8f2c234ed9d9..58d4ee3ae949 100644 --- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S +++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #define UART_SHIFT 2 - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE) ldr \rp, =PICOXCELL_UART1_BASE .endm -- cgit v1.2.3 From f7f9bdfadfda07afb904a9767468e38c2d1a6033 Mon Sep 17 00:00:00 2001 From: Julian Wollrath Date: Wed, 9 Nov 2011 10:02:40 +0100 Subject: ALSA: hda - fix internal mic on Dell Vostro 3500 laptop Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the new model dell-vostro-3500. Signed-off-by: Julian Wollrath Cc: Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_sigmatel.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 4f3443230d89..edad99abec21 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -349,6 +349,7 @@ STAC92HD83* ref Reference board mic-ref Reference board with power management for ports dell-s14 Dell laptop + dell-vostro-3500 Dell Vostro 3500 laptop hp HP laptops with (inverted) mute-LED hp-dv7-4000 HP dv-7 4000 auto BIOS setup (default) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 4e715fefebef..edc2b7bc177c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -95,6 +95,7 @@ enum { STAC_92HD83XXX_REF, STAC_92HD83XXX_PWR_REF, STAC_DELL_S14, + STAC_DELL_VOSTRO_3500, STAC_92HD83XXX_HP, STAC_92HD83XXX_HP_cNB11_INTQUAD, STAC_HP_DV7_4000, @@ -1659,6 +1660,12 @@ static const unsigned int dell_s14_pin_configs[10] = { 0x40f000f0, 0x40f000f0, }; +static const unsigned int dell_vostro_3500_pin_configs[10] = { + 0x02a11020, 0x0221101f, 0x400000f0, 0x90170110, + 0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160, + 0x400000f4, 0x400000f5, +}; + static const unsigned int hp_dv7_4000_pin_configs[10] = { 0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110, 0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140, @@ -1675,6 +1682,7 @@ static const unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, [STAC_DELL_S14] = dell_s14_pin_configs, + [STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs, [STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs, [STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs, }; @@ -1684,6 +1692,7 @@ static const char * const stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = "ref", [STAC_92HD83XXX_PWR_REF] = "mic-ref", [STAC_DELL_S14] = "dell-s14", + [STAC_DELL_VOSTRO_3500] = "dell-vostro-3500", [STAC_92HD83XXX_HP] = "hp", [STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad", [STAC_HP_DV7_4000] = "hp-dv7-4000", @@ -1697,6 +1706,8 @@ static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD83XXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba, "unknown Dell", STAC_DELL_S14), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028, + "Dell Vostro 3500", STAC_DELL_VOSTRO_3500), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600, "HP", STAC_92HD83XXX_HP), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656, -- cgit v1.2.3 From 55c0008be67a27944b6705251d9a8d4c56c67701 Mon Sep 17 00:00:00 2001 From: Alexey Fisher Date: Wed, 9 Nov 2011 11:39:24 +0100 Subject: ALSA: snd_usb_audio: add Logitech HD Webcam c510 to quirk-384 Logitech HD Webcam c510 provide wrong mixer resolution. Add it to "res = 384" quirk. Signed-off-by: Alexey Fisher Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index c5444e00f0c6..ab23869c01bb 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -799,6 +799,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ case USB_ID(0x046d, 0x0991): /* Most audio usb devices lie about volume resolution. * Most Logitech webcams have res = 384. -- cgit v1.2.3 From 44656fa03926e7363ab41c565619800a4b3b1322 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 8 Nov 2011 10:20:10 -0800 Subject: kbuild: Fix missing system calls check on mips. Commit 5f7efb4 (Kbuild: append missing-syscalls to the default target list) broke MIPS build. Reported-tested-and-acked-by: Ralf Baechle Signed-off-by: David Daney Signed-off-by: Michal Marek --- Kbuild | 2 +- arch/mips/Makefile | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Kbuild b/Kbuild index 4caab4f6cba7..b8b708ad6dc3 100644 --- a/Kbuild +++ b/Kbuild @@ -92,7 +92,7 @@ always += missing-syscalls targets += missing-syscalls quiet_cmd_syscalls = CALL $< - cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) + cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags) missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE $(call cmd,syscalls) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9b4cb00407d7..0be318609fc6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -286,11 +286,11 @@ CLEAN_FILES += vmlinux.32 vmlinux.64 archprepare: ifdef CONFIG_MIPS32_N32 @echo ' Checking missing-syscalls for N32' - $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32" + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32" endif ifdef CONFIG_MIPS32_O32 @echo ' Checking missing-syscalls for O32' - $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32" + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32" endif install: -- cgit v1.2.3 From e0e20753c15fc418d94fee826af394907df856d8 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 27 Oct 2011 20:38:24 -0700 Subject: pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list" when pinctl subsystem is not selected, when compiling drivers including the include/linux/pinctrl/pinctrl.h, we will get the warning as below: In file included from include/linux/pinctrl/pinmux.h:17, from drivers/tty/serial/sirfsoc_uart.c:25: include/linux/pinctrl/pinctrl.h:126: warning: 'struct pinctrl_dev' declared inside parameter list include/linux/pinctrl/pinctrl.h:126: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Barry Song Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinctrl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 3605e947fa90..04c011038f32 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -121,6 +121,7 @@ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else +struct pinctrl_dev; /* Sufficiently stupid default function when pinctrl is not in use */ static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin) -- cgit v1.2.3 From b3c41f4c18de9aa90315dd0d197f8485b00e3cc5 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 18 Sep 2011 09:56:35 +0800 Subject: ARM: at91: usart: drop static map regs for dbgu In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91cap9_devices.c | 5 ++--- arch/arm/mach-at91/at91rm9200_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9260_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9261_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9263_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9g45_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9rl_devices.c | 5 ++--- 7 files changed, 14 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index a4401d6b5b07..b9739baa21e4 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 01d8bbd1468b..66591fa53e05 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 24b6f8c0440d..25e3464fb07f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3b70b3897d95..ae78f4d03b73 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 3faa1fde9ad9..ad017eb1f8df 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 000b5e1da965..ad00953a7f4f 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 305a851b5bff..429b6d7e9492 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); -- cgit v1.2.3 From 30458edf667b77012573e649fced3cf5c01efe82 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 2 Nov 2011 15:02:43 +0800 Subject: at91: vmalloc fix missing AT91_VIRT_BASE define VMALLOC_END is defined in terms of AT91_VIRT_BASE but this needs mach/hardware.h for it's definition. In file included from arch/arm/mach-at91/board-usb-a926x.c:26:0: include/linux/mm.h: In function 'is_vmalloc_addr': include/linux/mm.h:305:41: error: 'AT91_VIRT_BASE' undeclared (first use in this function) include/linux/mm.h:305:41: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Jamie Iles --- arch/arm/mach-at91/include/mach/vmalloc.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h index 8eb459f3f5b7..8e4a1bd0ab1d 100644 --- a/arch/arm/mach-at91/include/mach/vmalloc.h +++ b/arch/arm/mach-at91/include/mach/vmalloc.h @@ -21,6 +21,8 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H +#include + #define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) #endif -- cgit v1.2.3 From b2eb5309fbc680406d6bf3b182178f0cfaf951fb Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 19 Sep 2011 19:26:52 +0800 Subject: at91/yl-9200: Fix section mismatch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/mach-at91/board-yl-9200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 649b052231f5..12a3f955162b 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = { #include