From 2b461880c20777d317b4ad24ef040918860133ca Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 18 Jul 2022 19:51:58 +1000 Subject: powerpc: Fix all occurences of duplicate words Since commit 87c78b612f4f ("powerpc: Fix all occurences of "the the"") fixed "the the", there's now a steady stream of patches fixing other duplicate words. Just fix them all at once, to save the overhead of dealing with individual patches for each case. This leaves a few cases of "that that", which in some contexts is correct. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220718095158.326606-1-mpe@ellerman.id.au --- arch/powerpc/crypto/aes-spe-glue.c | 2 +- arch/powerpc/kernel/btext.c | 2 +- arch/powerpc/kernel/eeh_driver.c | 2 +- arch/powerpc/kernel/exceptions-64s.S | 2 +- arch/powerpc/kernel/pci-common.c | 2 +- arch/powerpc/kernel/pci_dn.c | 2 +- arch/powerpc/kernel/ptrace/ptrace-vsx.c | 2 +- arch/powerpc/kernel/trace/ftrace.c | 6 +++--- arch/powerpc/kernel/watchdog.c | 2 +- arch/powerpc/kvm/book3s_hv.c | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 2 +- arch/powerpc/platforms/4xx/cpm.c | 2 +- arch/powerpc/platforms/powernv/vas-fault.c | 2 +- arch/powerpc/platforms/pseries/eeh_pseries.c | 2 +- arch/powerpc/platforms/pseries/papr_scm.c | 2 +- 15 files changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/powerpc/crypto/aes-spe-glue.c b/arch/powerpc/crypto/aes-spe-glue.c index e8dfe9fb0266..efab78a3a8f6 100644 --- a/arch/powerpc/crypto/aes-spe-glue.c +++ b/arch/powerpc/crypto/aes-spe-glue.c @@ -28,7 +28,7 @@ * instructions per clock cycle using one 32/64 bit unit (SU1) and one 32 * bit unit (SU2). One of these can be a memory access that is executed via * a single load and store unit (LSU). XTS-AES-256 takes ~780 operations per - * 16 byte block block or 25 cycles per byte. Thus 768 bytes of input data + * 16 byte block or 25 cycles per byte. Thus 768 bytes of input data * will need an estimated maximum of 20,000 cycles. Headroom for cache misses * included. Even with the low end model clocked at 667 MHz this equals to a * critical time window of less than 30us. The value has been chosen to diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 8f69bb07e500..2769889219bf 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -73,7 +73,7 @@ static inline void rmci_maybe_off(void) * the display during identify_machine() and MMU_Init() * * The display is mapped to virtual address 0xD0000000, rather - * than 1:1, because some some CHRP machines put the frame buffer + * than 1:1, because some CHRP machines put the frame buffer * in the region starting at 0xC0000000 (PAGE_OFFSET). * This mapping is temporary and will disappear as soon as the * setup done by MMU_Init() is applied. diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 260273e56431..f279295179bd 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -750,7 +750,7 @@ static void eeh_pe_cleanup(struct eeh_pe *pe) * @pdev: pci_dev to check * * This function may return a false positive if we can't determine the slot's - * presence state. This might happen for for PCIe slots if the PE containing + * presence state. This might happen for PCIe slots if the PE containing * the upstream bridge is also frozen, or the bridge is part of the same PE * as the device. * diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index b66dd6f775a4..3d0dc133a9ae 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -2779,7 +2779,7 @@ EXC_COMMON_BEGIN(soft_nmi_common) /* * An interrupt came in while soft-disabled. We set paca->irq_happened, then: - * - If it was a decrementer interrupt, we bump the dec to max and and return. + * - If it was a decrementer interrupt, we bump the dec to max and return. * - If it was a doorbell we return immediately since doorbells are edge * triggered and won't automatically refire. * - If it was a HMI we return immediately since we handled it in realmode diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index c87999289752..cbb912ee92fa 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1088,7 +1088,7 @@ void pcibios_fixup_bus(struct pci_bus *bus) */ pci_read_bridge_bases(bus); - /* Now fixup the bus bus */ + /* Now fixup the bus */ pcibios_setup_bus_self(bus); } EXPORT_SYMBOL(pcibios_fixup_bus); diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index 938ab8838ab5..7a35fc25a304 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -259,7 +259,7 @@ void remove_sriov_vf_pdns(struct pci_dev *pdev) if (edev) { /* * We allocate pci_dn's for the totalvfs count, - * but only only the vfs that were activated + * but only the vfs that were activated * have a configured PE. */ if (edev->pe) diff --git a/arch/powerpc/kernel/ptrace/ptrace-vsx.c b/arch/powerpc/kernel/ptrace/ptrace-vsx.c index 1da4303128ef..7df08004c47d 100644 --- a/arch/powerpc/kernel/ptrace/ptrace-vsx.c +++ b/arch/powerpc/kernel/ptrace/ptrace-vsx.c @@ -71,7 +71,7 @@ int fpr_set(struct task_struct *target, const struct user_regset *regset, } /* - * Currently to set and and get all the vsx state, you need to call + * Currently to set and get all the vsx state, you need to call * the fp and VMX calls as well. This only get/sets the lower 32 * 128bit VSX registers. */ diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c index cab67b5120b9..cb158c32b50b 100644 --- a/arch/powerpc/kernel/trace/ftrace.c +++ b/arch/powerpc/kernel/trace/ftrace.c @@ -125,7 +125,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - /* Make sure that that this is still a 24bit jump */ + /* Make sure that this is still a 24bit jump */ if (!is_bl_op(op)) { pr_err("Not expected bl: opcode is %08lx\n", ppc_inst_as_ulong(op)); return -EINVAL; @@ -311,7 +311,7 @@ static int __ftrace_make_nop_kernel(struct dyn_ftrace *rec, unsigned long addr) return -EFAULT; } - /* Make sure that that this is still a 24bit jump */ + /* Make sure that this is still a 24bit jump */ if (!is_bl_op(op)) { pr_err("Not expected bl: opcode is %08lx\n", ppc_inst_as_ulong(op)); return -EINVAL; @@ -564,7 +564,7 @@ __ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, return -EFAULT; } - /* Make sure that that this is still a 24bit jump */ + /* Make sure that this is still a 24bit jump */ if (!is_bl_op(op)) { pr_err("Not expected bl: opcode is %08lx\n", ppc_inst_as_ulong(op)); return -EINVAL; diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c index 7d28b9553654..dd882d00845d 100644 --- a/arch/powerpc/kernel/watchdog.c +++ b/arch/powerpc/kernel/watchdog.c @@ -353,7 +353,7 @@ static void watchdog_timer_interrupt(int cpu) if (__wd_nmi_output && xchg(&__wd_nmi_output, 0)) { /* * Something has called printk from NMI context. It might be - * stuck, so this this triggers a flush that will get that + * stuck, so this triggers a flush that will get that * printk output to the console. * * See wd_lockup_ipi. diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index c68883170a82..529b6c6895bf 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -5665,7 +5665,7 @@ static int kvmppc_clr_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi) else kvmppc_xics_clr_mapped(kvm, guest_gsi, pimap->mapped[i].r_hwirq); - /* invalidate the entry (what do do on error from the above ?) */ + /* invalidate the entry (what to do on error from the above ?) */ pimap->mapped[i].r_hwirq = 0; /* diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c index fc92613dc2bf..363a9447d63d 100644 --- a/arch/powerpc/mm/book3s64/hash_utils.c +++ b/arch/powerpc/mm/book3s64/hash_utils.c @@ -408,7 +408,7 @@ repeat: ssize); if (ret == -1) { /* - * Try to to keep bolted entries in primary. + * Try to keep bolted entries in primary. * Remove non bolted entries and try insert again */ ret = mmu_hash_ops.hpte_remove(hpteg); diff --git a/arch/powerpc/platforms/4xx/cpm.c b/arch/powerpc/platforms/4xx/cpm.c index 1d3bc35ee1a7..182e12855c27 100644 --- a/arch/powerpc/platforms/4xx/cpm.c +++ b/arch/powerpc/platforms/4xx/cpm.c @@ -63,7 +63,7 @@ static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask) * known as class 1, 2 and 3. For class 1 units, they are * unconditionally put to sleep when the corresponding CPM bit is * set. For class 2 and 3 units this is not case; if they can be - * put to to sleep, they will. Here we do not verify, we just + * put to sleep, they will. Here we do not verify, we just * set them and expect them to eventually go off when they can. */ value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]); diff --git a/arch/powerpc/platforms/powernv/vas-fault.c b/arch/powerpc/platforms/powernv/vas-fault.c index c1bfad56447d..2b47d5a86328 100644 --- a/arch/powerpc/platforms/powernv/vas-fault.c +++ b/arch/powerpc/platforms/powernv/vas-fault.c @@ -77,7 +77,7 @@ irqreturn_t vas_fault_thread_fn(int irq, void *data) /* * VAS can interrupt with multiple page faults. So process all * valid CRBs within fault FIFO until reaches invalid CRB. - * We use CCW[0] and pswid to validate validate CRBs: + * We use CCW[0] and pswid to validate CRBs: * * CCW[0] Reserved bit. When NX pastes CRB, CCW[0]=0 * OS sets this bit to 1 after reading CRB. diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 1b0c901a6f3b..8e40ccac0f44 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -71,7 +71,7 @@ static void pseries_pcibios_bus_add_device(struct pci_dev *pdev) if (pdev->is_virtfn) { /* * FIXME: This really should be handled by choosing the right - * parent PE in in pseries_eeh_init_edev(). + * parent PE in pseries_eeh_init_edev(). */ struct eeh_pe *physfn_pe = pci_dev_to_eeh_dev(pdev->physfn)->pe; struct eeh_dev *edev = pdn_to_eeh_dev(pdn); diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c index 69f21d30394b..20f6ed813bff 100644 --- a/arch/powerpc/platforms/pseries/papr_scm.c +++ b/arch/powerpc/platforms/pseries/papr_scm.c @@ -29,7 +29,7 @@ (1ul << ND_CMD_SET_CONFIG_DATA) | \ (1ul << ND_CMD_CALL)) -/* DIMM health bitmap bitmap indicators */ +/* DIMM health bitmap indicators */ /* SCM device is unable to persist memory contents */ #define PAPR_PMEM_UNARMED (1ULL << (63 - 0)) /* SCM device failed to persist memory contents */ -- cgit v1.2.3