From d90d8d5e52a61695483bdb827086a673936e8616 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Sat, 17 Jul 2010 14:29:06 -0700 Subject: Input: qt2160 - rename kconfig symbol name drivers/input/keyboard/Kconfig defines QT2160 while the corresponding Makefile expects CONFIG_KEYBOARD_QT2160 as all other keyboard drivers do. To keep this Makefile consistent rename the config-token from CONFIG_QT2160 to CONFIG_KEYBOARD_QT2160. The various defconfig files are left alone. Reported-by: Robert P. J. Day Signed-off-by: Christoph Fritz Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 0f9a4785d798..c96ccc136492 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -124,7 +124,7 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config QT2160 +config KEYBOARD_QT2160 tristate "Atmel AT42QT2160 Touch Sensor Chip" depends on I2C && EXPERIMENTAL help -- cgit v1.2.3 From 3e1bbc8d5018a05c0793c8a32b777a1396eb4414 Mon Sep 17 00:00:00 2001 From: Kamal Mostafa Date: Mon, 19 Jul 2010 11:00:52 -0700 Subject: Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up i8042 and breaking the touchpad. Add this model to i8042_dmi_noloop_table[] to resolve. BugLink: https://bugs.launchpad.net/bugs/580664 Signed-off-by: Kamal Mostafa Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 6168469ad1a6..42201c538086 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -165,6 +165,13 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_BOARD_VERSION, "1.02"), }, }, + { + /* Gigabyte Spring Peak - defines wrong chassis type */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"), + }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), -- cgit v1.2.3 From 1afaab90e8c0317170a53967064a934a77a59c16 Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Sun, 18 Jul 2010 22:23:19 -0700 Subject: Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' The name of platfrom device was changed and we need to make driver's name match in order for it to bind to the device. Signed-off-by: Wan ZongShun Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/w90p910_keypad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index 4ef764cc493c..ee2bf6bcf291 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -258,7 +258,7 @@ static struct platform_driver w90p910_keypad_driver = { .probe = w90p910_keypad_probe, .remove = __devexit_p(w90p910_keypad_remove), .driver = { - .name = "nuc900-keypad", + .name = "nuc900-kpi", .owner = THIS_MODULE, }, }; -- cgit v1.2.3 From 7b5d3312fbfbb21d2fc7de94e0db66cfdf8b0055 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 20 Jul 2010 20:25:35 -0700 Subject: Input: gamecon - reference correct input device in NES mode We moved input devices from 'struct gc' to individial pads (struct gc-pad), but gc_nes_process_packet() was still trying to use old ones and crashing. Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/gamecon.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index fbd62abb66f9..a79f70844108 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -89,7 +89,6 @@ struct gc_pad { struct gc { struct pardevice *pd; struct gc_pad pads[GC_MAX_DEVICES]; - struct input_dev *dev[GC_MAX_DEVICES]; struct timer_list timer; int pad_count[GC_MAX]; int used; @@ -387,7 +386,7 @@ static void gc_nes_process_packet(struct gc *gc) for (i = 0; i < GC_MAX_DEVICES; i++) { pad = &gc->pads[i]; - dev = gc->dev[i]; + dev = pad->dev; s = gc_status_bit[i]; switch (pad->type) { -- cgit v1.2.3 From c25f7b763cc35a249232ce612a36a811b0e263f9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 20 Jul 2010 20:25:35 -0700 Subject: Input: gamecon - reference correct pad in gc_psx_command() Otherwise we won't see any events from the gamepad. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408 Reported-and-tested-by: Eugene Yudin Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/gamecon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index a79f70844108..0ffaf2c77a19 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -578,7 +578,7 @@ static void gc_psx_command(struct gc *gc, int b, unsigned char *data) read = parport_read_status(port) ^ 0x80; for (j = 0; j < GC_MAX_DEVICES; j++) { - struct gc_pad *pad = &gc->pads[i]; + struct gc_pad *pad = &gc->pads[j]; if (pad->type == GC_PSX || pad->type == GC_DDR) data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0; -- cgit v1.2.3 From 3fea60261e73dbf4a51130d40cafcc8465b0f2c3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 20 Jul 2010 20:25:35 -0700 Subject: Input: twl40300-keypad - fix handling of "all ground" rows The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: Laurent Pinchart Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- arch/arm/mach-omap2/board-rx51-peripherals.c | 17 ++++++++++++++--- drivers/input/keyboard/twl4030_keypad.c | 17 +++++++++++------ 2 files changed, 25 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index abdf321c2d41..c5555ca13d00 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -175,6 +175,10 @@ static void __init rx51_add_gpio_keys(void) #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ static int board_keymap[] = { + /* + * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row + * connected to the ground" matrix state. + */ KEY(0, 0, KEY_Q), KEY(0, 1, KEY_O), KEY(0, 2, KEY_P), @@ -182,6 +186,7 @@ static int board_keymap[] = { KEY(0, 4, KEY_BACKSPACE), KEY(0, 6, KEY_A), KEY(0, 7, KEY_S), + KEY(1, 0, KEY_W), KEY(1, 1, KEY_D), KEY(1, 2, KEY_F), @@ -190,6 +195,7 @@ static int board_keymap[] = { KEY(1, 5, KEY_J), KEY(1, 6, KEY_K), KEY(1, 7, KEY_L), + KEY(2, 0, KEY_E), KEY(2, 1, KEY_DOT), KEY(2, 2, KEY_UP), @@ -197,6 +203,8 @@ static int board_keymap[] = { KEY(2, 5, KEY_Z), KEY(2, 6, KEY_X), KEY(2, 7, KEY_C), + KEY(2, 8, KEY_F9), + KEY(3, 0, KEY_R), KEY(3, 1, KEY_V), KEY(3, 2, KEY_B), @@ -205,20 +213,23 @@ static int board_keymap[] = { KEY(3, 5, KEY_SPACE), KEY(3, 6, KEY_SPACE), KEY(3, 7, KEY_LEFT), + KEY(4, 0, KEY_T), KEY(4, 1, KEY_DOWN), KEY(4, 2, KEY_RIGHT), KEY(4, 4, KEY_LEFTCTRL), KEY(4, 5, KEY_RIGHTALT), KEY(4, 6, KEY_LEFTSHIFT), + KEY(4, 8, KEY_10), + KEY(5, 0, KEY_Y), + KEY(5, 8, KEY_11), + KEY(6, 0, KEY_U), + KEY(7, 0, KEY_I), KEY(7, 1, KEY_F7), KEY(7, 2, KEY_F8), - KEY(0xff, 2, KEY_F9), - KEY(0xff, 4, KEY_F10), - KEY(0xff, 5, KEY_F11), }; static struct matrix_keymap_data board_map_data = { diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 7aa59e07b689..fb16b5e5ea13 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -51,8 +51,12 @@ */ #define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */ #define TWL4030_MAX_COLS 8 -#define TWL4030_ROW_SHIFT 3 -#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS * TWL4030_MAX_COLS) +/* + * Note that we add space for an extra column so that we can handle + * row lines connected to the gnd (see twl4030_col_xlate()). + */ +#define TWL4030_ROW_SHIFT 4 +#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT) struct twl4030_keypad { unsigned short keymap[TWL4030_KEYMAP_SIZE]; @@ -182,7 +186,7 @@ static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state) return ret; } -static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) +static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) { int i; u16 check = 0; @@ -191,12 +195,12 @@ static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state) u16 col = key_state[i]; if ((col & check) && hweight16(col) > 1) - return 1; + return true; check |= col; } - return 0; + return false; } static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all) @@ -225,7 +229,8 @@ static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all) if (!changed) continue; - for (col = 0; col < kp->n_cols; col++) { + /* Extra column handles "all gnd" rows */ + for (col = 0; col < kp->n_cols + 1; col++) { int code; if (!(changed & (1 << col))) -- cgit v1.2.3 From 3619b8fead04ab9de643712e757ef6b5f79fd1ab Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 21 Jul 2010 00:01:19 -0700 Subject: Input: synaptics - relax capability ID checks on newer hardware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: Miroslav Šulc Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 7 ++++++- drivers/input/mouse/synaptics.h | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 9ba9c4a17e15..705589dc9ac5 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -141,8 +141,13 @@ static int synaptics_capability(struct psmouse *psmouse) priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2]; priv->ext_cap = priv->ext_cap_0c = 0; - if (!SYN_CAP_VALID(priv->capabilities)) + /* + * Older firmwares had submodel ID fixed to 0x47 + */ + if (SYN_ID_FULL(priv->identity) < 0x705 && + SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) { return -1; + } /* * Unless capExtended is set the rest of the flags should be ignored diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 7d4d5e12c0df..b6aa7d20d8a3 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -47,7 +47,7 @@ #define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3)) #define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1)) #define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0)) -#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47) +#define SYN_CAP_SUBMODEL_ID(c) (((c) & 0x00ff00) >> 8) #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) #define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) @@ -66,6 +66,7 @@ #define SYN_ID_MODEL(i) (((i) >> 4) & 0x0f) #define SYN_ID_MAJOR(i) ((i) & 0x0f) #define SYN_ID_MINOR(i) (((i) >> 16) & 0xff) +#define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i)) #define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47) /* synaptics special commands */ -- cgit v1.2.3