From 6f41469c627fe118121dfce2a8134ad24da3df28 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: block: clear req->errors on bio completion only for fs requests Impact: subtle behavior change For fs requests, rq is only carrier of bios and rq error status as a whole doesn't mean much. This is the reason why rq->errors is being cleared on each partial completion of a request as on each partial completion the error status is transferred to the respective bios. For pc requests, rq->errors is used to carry error status to the issuer and thus __end_that_request_first() doesn't clear it on such cases. The condition was fine till now as only fs and pc requests have used bio and thus the bio completion path. However, future changes will unify data accesses to bio and all non fs users care about rq error status. Clear rq->errors on bio completion only for fs requests. In general, the implicit clearing is a bit too subtle especially as the meaning of rq->errors is completely dependent on low level drivers. Unifying / cleaning up rq->errors usage and letting llds manage it would be better. TODO comment added. Signed-off-by: Tejun Heo Acked-by: Jens Axboe --- block/blk-core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 07ab75403e1a..cce7a88dc612 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1739,10 +1739,14 @@ static int __end_that_request_first(struct request *req, int error, trace_block_rq_complete(req->q, req); /* - * for a REQ_TYPE_BLOCK_PC request, we want to carry any eventual - * sense key with us all the way through + * For fs requests, rq is just carrier of independent bio's + * and each partial completion should be handled separately. + * Reset per-request error on each partial completion. + * + * TODO: tj: This is too subtle. It would be better to let + * low level drivers do what they see fit. */ - if (!blk_pc_request(req)) + if (blk_fs_request(req)) req->errors = 0; if (error && (blk_fs_request(req) && !(req->cmd_flags & REQ_QUIET))) { -- cgit v1.2.3 From 1e75540ec5202cae63cd238c86bd880e3d496546 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580f..3a53e0834cf7 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; -- cgit v1.2.3 From 853280a4dc8e3cc97ff10c1c02234d96078f437b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: use blk_run_queue() instead of blk_start_queueing() blk_start_queueing() is being phased out in favor of [__]blk_run_queue(). Switch. Signed-off-by: Tejun Heo --- drivers/ide/ide-park.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index 310d03f2b5b7..a914023d6d03 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -24,11 +24,8 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) start_queue = 1; spin_unlock_irq(&hwif->lock); - if (start_queue) { - spin_lock_irq(q->queue_lock); - blk_start_queueing(q); - spin_unlock_irq(q->queue_lock); - } + if (start_queue) + blk_run_queue(q); return; } spin_unlock_irq(&hwif->lock); -- cgit v1.2.3 From 55f3f399422a4a3f6cb84ea4096dfaddf8817399 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: don't set REQ_SOFTBARRIER ide doesn't have to worry about REQ_SOFTBARRIER. Don't set it. Signed-off-by: Tejun Heo --- drivers/ide/ide-disk.c | 1 - drivers/ide/ide-ioctls.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a9fbe2c31210..c2438804d3c4 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -411,7 +411,6 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->cmd_flags |= REQ_SOFTBARRIER; rq->special = cmd; } diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index c1c25ebbaa1f..5991b23793f2 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -231,7 +231,6 @@ static int generic_drive_reset(ide_drive_t *drive) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; - rq->cmd_flags |= REQ_SOFTBARRIER; if (blk_execute_rq(drive->queue, NULL, rq, 1)) ret = rq->errors; blk_put_request(rq); -- cgit v1.2.3 From 46a802e852c2106d755f697819ea80cd3ffdc222 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide kill unused ide_cmd->special Impact: removal of unused field No one uses ide_cmd->special anymore. Kill it. Signed-off-by: Tejun Heo --- include/linux/ide.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index ff65fffb078f..846a1e132407 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -324,7 +324,6 @@ struct ide_cmd { unsigned int cursg_ofs; struct request *rq; /* copy of request */ - void *special; /* valid_t generally */ }; /* ATAPI packet command flags */ -- cgit v1.2.3 From 1873b90cdea038715ec7140fccc2116fb930ffb5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-cd: clear sense buffer before issuing request sense Impact: code simplification ide_cd_request_sense_fixup() clears the tail of the sense buffer if the device didn't completely fill it. This patch makes cdrom_queue_request_sense() clear the sense buffer before issuing the command instead of clearing it afterwards. This simplifies code and eases future changes. Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3aec19d1fdfc..509f1293cae2 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -217,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, if (sense == NULL) sense = &info->sense_data; + memset(sense, 0, 18); + /* stuff the sense request in front of our current request */ blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_ATA_PC; @@ -504,14 +506,8 @@ static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd) * and some drives don't send them. Sigh. */ if (rq->cmd[0] == GPCMD_REQUEST_SENSE && - cmd->nleft > 0 && cmd->nleft <= 5) { - unsigned int ofs = cmd->nbytes - cmd->nleft; - - while (cmd->nleft > 0) { - *((u8 *)rq->data + ofs++) = 0; - cmd->nleft--; - } - } + cmd->nleft > 0 && cmd->nleft <= 5) + cmd->nleft = 0; } int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, -- cgit v1.2.3 From 7f006dc24fae158131116c9472874f12e16cf040 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-floppy: block pc always uses bio Impact: remove unnecessary code path Block pc requests always use bio and rq->data is always NULL. No need to worry about !rq->bio cases in idefloppy_block_pc_cmd(). Note that ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg fine. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-floppy.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2b4868d95f8b..3b22e066287e 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -216,15 +216,13 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - if (rq->data_len && rq_data_dir(rq) == WRITE) - pc->flags |= PC_FLAG_WRITING; - pc->buf = rq->data; - if (rq->bio) + if (rq->data_len) { pc->flags |= PC_FLAG_DMA_OK; - /* - * possibly problematic, doesn't look like ide-floppy correctly - * handled scattered requests if dma fails... - */ + if (rq_data_dir(rq) == WRITE) + pc->flags |= PC_FLAG_WRITING; + } + /* pio will be performed by ide_pio_bytes() which handles sg fine */ + pc->buf = NULL; pc->req_xfer = pc->buf_size = rq->data_len; } -- cgit v1.2.3 From eace4cb04c0edc9388e987bf9bbdef461f6daca4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-taskfile: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide_raw_taskfile() directly uses rq->buffer to carry pointer to the data buffer. This complicates both block interface and ide backend request handling. Use blk_rq_map_kern() instead and drop special handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg(). Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it to initialize bio rw flag. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 5 +---- drivers/ide/ide-taskfile.c | 18 +++++++++++------- 2 files changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c5..9b9e8b1aae5e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,10 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); - cmd->sg_nents = 1; - } else if (!rq->bio) { + if (!rq->bio) { sg_init_one(sg, rq->data, rq->data_len); cmd->sg_nents = 1; } else diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 4aa6223c11be..f400eb4d4aff 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -424,7 +424,9 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->buffer = buf; + + if (cmd->tf_flags & IDE_TFLAG_WRITE) + rq->cmd_flags |= REQ_RW; /* * (ks) We transfer currently only whole sectors. @@ -432,18 +434,20 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq->hard_nr_sectors = rq->nr_sectors = nsect; - rq->hard_cur_sectors = rq->current_nr_sectors = nsect; - - if (cmd->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; + if (nsect) { + error = blk_rq_map_kern(drive->queue, rq, buf, + nsect * SECTOR_SIZE, __GFP_WAIT); + if (error) + goto put_req; + } rq->special = cmd; cmd->rq = rq; error = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); +put_req: + blk_put_request(rq); return error; } -- cgit v1.2.3 From c267cc1c4db4ccb3406d045a8da8660f0bbfe08d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-atapi uses rq->buffer as private opaque value for internal special requests. rq->special isn't used for these cases (the only case where rq->special is used is for ide-tape rw requests). Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-tape.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 7201b176d75b..2894577237ba 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -90,7 +90,7 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; - rq->buffer = (char *)pc; + rq->special = (char *)pc; rq->rq_disk = disk; if (pc->req_xfer) { @@ -119,7 +119,7 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; - rq->buffer = (char *)pc; + rq->special = (char *)pc; if (pc->req_xfer) { rq->data = pc->buf; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3b22e066287e..94600331a271 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -264,7 +264,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); } else if (blk_special_request(rq)) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3a53e0834cf7..aadf53cfac6f 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -828,7 +828,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, goto out; } if (rq->cmd[13] & REQ_IDETAPE_PC1) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; rq->cmd[13] &= ~(REQ_IDETAPE_PC1); rq->cmd[13] |= REQ_IDETAPE_PC2; goto out; -- cgit v1.2.3 From cbfd082abfcbed8c57a12636f36e9bead8d6cfc6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-cd uses rq->buffer to carry pointer to the original request when issuing REQUEST_SENSE. Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 509f1293cae2..eb3c299d95de 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -232,8 +232,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->cmd_type = REQ_TYPE_SENSE; rq->cmd_flags |= REQ_PREEMPT; - /* NOTE! Save the failed command in "rq->buffer" */ - rq->buffer = (void *) failed_command; + /* NOTE! Save the failed command in "rq->special" */ + rq->special = (void *)failed_command; if (failed_command) ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", @@ -247,10 +247,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* - * For REQ_TYPE_SENSE, "rq->buffer" points to the original + * For REQ_TYPE_SENSE, "rq->special" points to the original * failed request */ - struct request *failed = (struct request *)rq->buffer; + struct request *failed = (struct request *)rq->special; struct cdrom_info *info = drive->driver_data; void *sense = &info->sense_data; -- cgit v1.2.3 From a1df5169f9bf08f6067029bfb840a05e282b1b97 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide: add helpers for preparing sense requests This is in preparation of removing the queueing of a sense request out of the IRQ handler path. Use struct request_sense as a general sense buffer for all ATAPI devices ide-{floppy,tape,cd}. tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as it can cause deadlock. Converted to use inline struct request and blk_rq_init(). * Added xfer / cdb len selection depending on device type. * All sense prep logics folded into ide_prep_sense() which never fails. * hwif->rq clearing and sense_rq used handling moved into ide_queue_sense_rq(). * blk_rq_map_kern() conversion is moved to later patch. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/ide.h | 11 +++++++++ 2 files changed, 72 insertions(+) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2894577237ba..c6e03485a63a 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -191,6 +191,67 @@ void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); +void ide_prep_sense(ide_drive_t *drive, struct request *rq) +{ + struct request_sense *sense = &drive->sense_data; + struct request *sense_rq = &drive->sense_rq; + unsigned int cmd_len, sense_len; + + debug_log("%s: enter\n", __func__); + + switch (drive->media) { + case ide_floppy: + cmd_len = 255; + sense_len = 18; + break; + case ide_tape: + cmd_len = 20; + sense_len = 20; + break; + default: + cmd_len = 18; + sense_len = 18; + } + + BUG_ON(sense_len > sizeof(*sense)); + + if (blk_sense_request(rq) || drive->sense_rq_armed) + return; + + memset(sense, 0, sizeof(*sense)); + + blk_rq_init(rq->q, sense_rq); + sense_rq->rq_disk = rq->rq_disk; + + sense_rq->data = sense; + sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; + sense_rq->cmd[4] = cmd_len; + sense_rq->data_len = sense_len; + + sense_rq->cmd_type = REQ_TYPE_SENSE; + sense_rq->cmd_flags |= REQ_PREEMPT; + + if (drive->media == ide_tape) + sense_rq->cmd[13] = REQ_IDETAPE_PC1; + + drive->sense_rq_armed = true; +} +EXPORT_SYMBOL_GPL(ide_prep_sense); + +void ide_queue_sense_rq(ide_drive_t *drive, void *special) +{ + BUG_ON(!drive->sense_rq_armed); + + drive->sense_rq.special = special; + drive->sense_rq_armed = false; + + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, &drive->sense_rq, + ELEVATOR_INSERT_FRONT, 0); +} +EXPORT_SYMBOL_GPL(ide_queue_sense_rq); + /* * Called when an error was detected during the last packet command. * We queue a request sense packet command in the head of the request list. diff --git a/include/linux/ide.h b/include/linux/ide.h index 846a1e132407..a69ccac56411 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -26,6 +26,9 @@ #include #include +/* for request_sense */ +#include + #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) # define SUPPORT_VLB_SYNC 0 #else @@ -602,6 +605,11 @@ struct ide_drive_s { struct ide_atapi_pc request_sense_pc; struct request request_sense_rq; + + /* current sense rq and buffer */ + bool sense_rq_armed; + struct request sense_rq; + struct request_sense sense_data; }; typedef struct ide_drive_s ide_drive_t; @@ -1175,6 +1183,9 @@ int ide_set_media_lock(ide_drive_t *, struct gendisk *, int); void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *); void ide_retry_pc(ide_drive_t *, struct gendisk *); +void ide_prep_sense(ide_drive_t *drive, struct request *rq); +void ide_queue_sense_rq(ide_drive_t *drive, void *special); + int ide_cd_expiry(ide_drive_t *); int ide_cd_get_xferlen(struct request *); -- cgit v1.2.3 From 746d5e43274e9ea6cbd58818afc9239d41fb4e1e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: convert to using generic sense request Preallocate a sense request in the ->do_request method and reinitialize it only on demand, in case it's been consumed in the IRQ handler path. The reason for this is that we don't want to be mapping rq to bio in the IRQ path and introduce all kinds of unnecessary hacks to the block layer. tj: * Both user and kernel PC requests expect sense data to be stored in separate storage other than drive->sense_data. Copy sense data to rq->sense on completion if rq->sense is not NULL. This fixes bogus sense data on PC requests. As a result, remove cdrom_queue_request_sense. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 54 ++++++++++++---------------------------------------- drivers/ide/ide-cd.h | 4 ---- 2 files changed, 12 insertions(+), 46 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index eb3c299d95de..7b21c7eac5b0 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -206,44 +206,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, - struct request *failed_command) -{ - struct cdrom_info *info = drive->driver_data; - struct request *rq = &drive->request_sense_rq; - - ide_debug_log(IDE_DBG_SENSE, "enter"); - - if (sense == NULL) - sense = &info->sense_data; - - memset(sense, 0, 18); - - /* stuff the sense request in front of our current request */ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = info->disk; - - rq->data = sense; - rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = 18; - rq->data_len = 18; - - rq->cmd_type = REQ_TYPE_SENSE; - rq->cmd_flags |= REQ_PREEMPT; - - /* NOTE! Save the failed command in "rq->special" */ - rq->special = (void *)failed_command; - - if (failed_command) - ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", - failed_command->cmd[0]); - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* @@ -251,11 +213,16 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) * failed request */ struct request *failed = (struct request *)rq->special; - struct cdrom_info *info = drive->driver_data; - void *sense = &info->sense_data; + struct request_sense *sense = &drive->sense_data; if (failed) { if (failed->sense) { + /* + * Sense is always read into drive->sense_data. + * Copy back if the failed request has its + * sense pointer set. + */ + memcpy(failed->sense, sense, 18); sense = failed->sense; failed->sense_len = rq->sense_len; } @@ -431,7 +398,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - cdrom_queue_request_sense(drive, NULL, NULL); + ide_queue_sense_rq(drive, NULL); return 1; end_request: @@ -445,7 +412,7 @@ end_request: hwif->rq = NULL; - cdrom_queue_request_sense(drive, rq->sense, rq); + ide_queue_sense_rq(drive, rq); return 1; } else return 2; @@ -893,6 +860,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, goto out_end; } + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 1d97101099ce..93a3cf1b0f3f 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -87,10 +87,6 @@ struct cdrom_info { struct atapi_toc *toc; - /* The result of the last successful request sense command - on this device. */ - struct request_sense sense_data; - u8 max_speed; /* Max speed of the drive. */ u8 current_speed; /* Current speed of the drive. */ -- cgit v1.2.3 From 6b544fcc8cd0a04eb42de9d1ecdd345e979d6ada Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer Since we're issuing REQ_TYPE_SENSE now we need to allow those types of rqs in the ->do_request callbacks. As a future improvement, sense_len assignment might be unified across all ATAPI devices. Borislav to check with specs and test. As a result, get rid of ide_queue_pc_head() and drive->request_sense_rq. tj: * Init request sense ide_atapi_pc from sense request. In the longer timer, it would probably better to fold ide_create_request_sense_cmd() into its only current user - ide_floppy_get_format_progress(). * ide_retry_pc() no longer takes @disk. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 48 ++++++++++++++---------------------------------- drivers/ide/ide-floppy.c | 4 +++- drivers/ide/ide-tape.c | 7 +++++-- include/linux/ide.h | 3 +-- 4 files changed, 23 insertions(+), 39 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index c6e03485a63a..972c522516f8 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -79,34 +79,6 @@ void ide_init_pc(struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_init_pc); -/* - * Generate a new packet command request in front of the request queue, before - * the current request, so that it will be processed immediately, on the next - * pass through the driver. - */ -static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, - struct ide_atapi_pc *pc, struct request *rq) -{ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->special = (char *)pc; - rq->rq_disk = disk; - - if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; - } - - memcpy(rq->cmd, pc->c, 12); - if (drive->media == ide_tape) - rq->cmd[13] = REQ_IDETAPE_PC1; - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - /* * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. @@ -254,18 +226,26 @@ EXPORT_SYMBOL_GPL(ide_queue_sense_rq); /* * Called when an error was detected during the last packet command. - * We queue a request sense packet command in the head of the request list. + * We queue a request sense packet command at the head of the request + * queue. */ -void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) +void ide_retry_pc(ide_drive_t *drive) { - struct request *rq = &drive->request_sense_rq; + struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; (void)ide_read_error(drive); - ide_create_request_sense_cmd(drive, pc); + + /* init pc from sense_rq */ + ide_init_pc(pc); + memcpy(pc->c, sense_rq->cmd, 12); + pc->buf = sense_rq->data; + pc->req_xfer = sense_rq->data_len; + if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_pc_head(drive, disk, pc, rq); + + ide_queue_sense_rq(drive, pc); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -404,7 +384,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ - ide_retry_pc(drive, rq->rq_disk); + ide_retry_pc(drive); /* queued, but not started */ return ide_stopped; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 94600331a271..d3302cc891e4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -263,7 +263,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); - } else if (blk_special_request(rq)) { + } else if (blk_special_request(rq) || blk_sense_request(rq)) { pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; @@ -273,6 +273,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, goto out_end; } + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index aadf53cfac6f..8324dfa78a3f 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -695,7 +695,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - ide_retry_pc(drive, tape->disk); + ide_retry_pc(drive); return ide_stopped; } pc->error = 0; @@ -752,7 +752,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, (unsigned long long)rq->sector, rq->nr_sectors, rq->current_nr_sectors); - if (!blk_special_request(rq)) { + if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " "request queue (%d)\n", drive->name, rq->cmd_type); @@ -840,6 +840,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, BUG(); out: + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/include/linux/ide.h b/include/linux/ide.h index a69ccac56411..9e67ccac3c1f 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -604,7 +604,6 @@ struct ide_drive_s { unsigned long atapi_flags; struct ide_atapi_pc request_sense_pc; - struct request request_sense_rq; /* current sense rq and buffer */ bool sense_rq_armed; @@ -1181,7 +1180,7 @@ int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *); int ide_do_start_stop(ide_drive_t *, struct gendisk *, int); int ide_set_media_lock(ide_drive_t *, struct gendisk *, int); void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *); -void ide_retry_pc(ide_drive_t *, struct gendisk *); +void ide_retry_pc(ide_drive_t *drive); void ide_prep_sense(ide_drive_t *drive, struct request *rq); void ide_queue_sense_rq(ide_drive_t *drive, void *special); -- cgit v1.2.3 From 5c4be57249e2e09136446597d2fe2a967c6ffef0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd,atapi: use bio for internal commands Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 52 +++++++++++++++++++++++++++++-------------------- drivers/ide/ide-cd.c | 28 +++++++++++++------------- drivers/ide/ide-io.c | 3 +++ drivers/ide/ide-tape.c | 3 +++ include/linux/ide.h | 2 +- 5 files changed, 52 insertions(+), 36 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 972c522516f8..5cefe12f5622 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -94,16 +94,18 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq->special = (char *)pc; if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; + error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer, + GFP_NOIO); + if (error) + goto put_req; } memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; error = blk_execute_rq(drive->queue, disk, rq, 0); +put_req: blk_put_request(rq); - return error; } EXPORT_SYMBOL_GPL(ide_queue_pc_tail); @@ -168,6 +170,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) struct request_sense *sense = &drive->sense_data; struct request *sense_rq = &drive->sense_rq; unsigned int cmd_len, sense_len; + int err; debug_log("%s: enter\n", __func__); @@ -193,13 +196,19 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) memset(sense, 0, sizeof(*sense)); blk_rq_init(rq->q, sense_rq); - sense_rq->rq_disk = rq->rq_disk; - sense_rq->data = sense; + err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, + GFP_NOIO); + if (unlikely(err)) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: failed to map sense buffer\n", + drive->name); + return; + } + + sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; sense_rq->cmd[4] = cmd_len; - sense_rq->data_len = sense_len; - sense_rq->cmd_type = REQ_TYPE_SENSE; sense_rq->cmd_flags |= REQ_PREEMPT; @@ -210,9 +219,14 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) } EXPORT_SYMBOL_GPL(ide_prep_sense); -void ide_queue_sense_rq(ide_drive_t *drive, void *special) +int ide_queue_sense_rq(ide_drive_t *drive, void *special) { - BUG_ON(!drive->sense_rq_armed); + /* deferred failure from ide_prep_sense() */ + if (!drive->sense_rq_armed) { + printk(KERN_WARNING "%s: failed queue sense request\n", + drive->name); + return -ENOMEM; + } drive->sense_rq.special = special; drive->sense_rq_armed = false; @@ -221,6 +235,7 @@ void ide_queue_sense_rq(ide_drive_t *drive, void *special) elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT, 0); + return 0; } EXPORT_SYMBOL_GPL(ide_queue_sense_rq); @@ -239,13 +254,14 @@ void ide_retry_pc(ide_drive_t *drive) /* init pc from sense_rq */ ide_init_pc(pc); memcpy(pc->c, sense_rq->cmd, 12); - pc->buf = sense_rq->data; + pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */ pc->req_xfer = sense_rq->data_len; if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_sense_rq(drive, pc); + if (ide_queue_sense_rq(drive, pc)) + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -317,7 +333,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xferfunc; unsigned int timeout, done; u16 bcount; u8 stat, ireason, dsc = 0; @@ -411,7 +426,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape) + if (drive->media == ide_tape && !rq->bio) done = ide_rq_bytes(rq); /* FIXME */ else done = blk_rq_bytes(rq); @@ -448,16 +463,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - xferfunc = write ? tp_ops->output_data : tp_ops->input_data; - - if (drive->media == ide_floppy && pc->buf == NULL) { + if (drive->media == ide_tape && pc->bh) + done = drive->pc_io_buffers(drive, pc, bcount, write); + else { done = min_t(unsigned int, bcount, cmd->nleft); ide_pio_bytes(drive, cmd, write, done); - } else if (drive->media == ide_tape && pc->bh) { - done = drive->pc_io_buffers(drive, pc, bcount, write); - } else { - done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred); - xferfunc(drive, NULL, pc->cur_pos, done); } /* Update the current position */ diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 7b21c7eac5b0..392a5bdf2fd3 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -210,10 +210,12 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* * For REQ_TYPE_SENSE, "rq->special" points to the original - * failed request + * failed request. Also, the sense data should be read + * directly from rq which might be different from the original + * sense buffer if it got copied during mapping. */ struct request *failed = (struct request *)rq->special; - struct request_sense *sense = &drive->sense_data; + void *sense = bio_data(rq->bio); if (failed) { if (failed->sense) { @@ -398,7 +400,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - ide_queue_sense_rq(drive, NULL); + return ide_queue_sense_rq(drive, NULL) ? 2 : 1; return 1; end_request: @@ -412,8 +414,7 @@ end_request: hwif->rq = NULL; - ide_queue_sense_rq(drive, rq); - return 1; + return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else return 2; } @@ -507,8 +508,12 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, rq->cmd_flags |= cmd_flags; rq->timeout = timeout; if (buffer) { - rq->data = buffer; - rq->data_len = *bufflen; + error = blk_rq_map_kern(drive->queue, rq, buffer, + *bufflen, GFP_NOIO); + if (error) { + blk_put_request(rq); + return error; + } } error = blk_execute_rq(drive->queue, info->disk, rq, 0); @@ -802,15 +807,10 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) drive->dma = 0; /* sg request */ - if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + if (rq->bio) { struct request_queue *q = drive->queue; + char *buf = bio_data(rq->bio); unsigned int alignment; - char *buf; - - if (rq->bio) - buf = bio_data(rq->bio); - else - buf = rq->data; drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9b9e8b1aae5e..3245c2dbda33 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -481,6 +481,9 @@ void do_ide_request(struct request_queue *q) spin_unlock_irq(q->queue_lock); + /* HLD do_request() callback might sleep, make sure it's okay */ + might_sleep(); + if (ide_lock_host(host, hwif)) goto plug_device_2; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8324dfa78a3f..9b762a2d5d95 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -850,6 +850,9 @@ out: cmd.rq = rq; + ide_init_sg_cmd(&cmd, pc->req_xfer); + ide_map_sg(drive, &cmd); + return ide_tape_issue_pc(drive, &cmd, pc); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 9e67ccac3c1f..1957461ac762 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1183,7 +1183,7 @@ void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *); void ide_retry_pc(ide_drive_t *drive); void ide_prep_sense(ide_drive_t *drive, struct request *rq); -void ide_queue_sense_rq(ide_drive_t *drive, void *special); +int ide_queue_sense_rq(ide_drive_t *drive, void *special); int ide_cd_expiry(ide_drive_t *); -- cgit v1.2.3 From fc38b521dcffcb07447cd98fedc56f495c10b90d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:43 +0900 Subject: ide-pm: don't abuse rq->data Impact: cleanup rq->data usage ide-pm uses rq->data to carry pointer to struct request_pm_state through request queue and rq->special is used to carray pointer to local struct ide_cmd, which isn't necessary. Use rq->special for request_pm_state instead and use local ide_cmd in ide_start_power_step(). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-pm.c | 38 +++++++++++++++----------------------- 2 files changed, 16 insertions(+), 24 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 3245c2dbda33..6e3094e22775 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -368,7 +368,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, pm->pm_step); diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 0d8a151c0a01..ba1488bd8430 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -7,7 +7,6 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int ret; /* call ACPI _GTM only once */ @@ -15,11 +14,9 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_acpi_get_timing(hwif); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_SUSPEND; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; @@ -41,7 +38,6 @@ int generic_ide_resume(struct device *dev) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int err; /* call ACPI _PS0 / _STM only once */ @@ -53,12 +49,10 @@ int generic_ide_resume(struct device *dev) ide_acpi_exec_tfs(drive); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_RESUME; rq->cmd_flags |= REQ_PREEMPT; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; @@ -77,7 +71,7 @@ int generic_ide_resume(struct device *dev) void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk(KERN_INFO "%s: complete_power_step(step: %d)\n", @@ -107,10 +101,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq) ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; - struct ide_cmd *cmd = rq->special; - - memset(cmd, 0, sizeof(*cmd)); + struct request_pm_state *pm = rq->special; + struct ide_cmd cmd = { }; switch (pm->pm_step) { case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ @@ -123,12 +115,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) - cmd->tf.command = ATA_CMD_FLUSH_EXT; + cmd.tf.command = ATA_CMD_FLUSH_EXT; else - cmd->tf.command = ATA_CMD_FLUSH; + cmd.tf.command = ATA_CMD_FLUSH; goto out_do_tf; case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - cmd->tf.command = ATA_CMD_STANDBYNOW1; + cmd.tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); @@ -141,7 +133,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ - cmd->tf.command = ATA_CMD_IDLEIMMEDIATE; + cmd.tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ /* @@ -163,11 +155,11 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; out_do_tf: - cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; - cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - cmd->protocol = ATA_PROT_NODATA; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_NODATA; - return do_rw_taskfile(drive, cmd); + return do_rw_taskfile(drive, &cmd); } /** @@ -181,7 +173,7 @@ out_do_tf: void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; unsigned long flags; ide_complete_power_step(drive, rq); @@ -207,7 +199,7 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; if (blk_pm_suspend_request(rq) && pm->pm_step == IDE_PM_START_SUSPEND) -- cgit v1.2.3 From ea7066afcd590e4663e6dc010f93704164050f48 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape,floppy: fix failed command completion after request sense Impact: fix infinite retry loop After a command failed, ide-tape and floppy inserts REQUEST_SENSE in front of the failed command and according to the result, sets pc->retries, flags and errors. After REQUEST_SENSE is complete, the failed command is again at the front of the queue and if the verdict was to terminate the request, the issue functions tries to complete it directly by calling drive->pc_callback() and returning ide_stopped. However, drive->pc_callback() doesn't complete a request. It only prepares for completion of the request. As a result, this creates an infinite loop where the failed request is retried perpetually. Fix it by actually ending the request by calling ide_complete_rq(). Signed-off-by: Tejun Heo --- drivers/ide/ide-floppy.c | 1 + drivers/ide/ide-tape.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d3302cc891e4..d20704ac3183 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -141,6 +141,7 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 9b762a2d5d95..2b9a13671c5f 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -643,6 +643,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, } drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3 From b3071d190d6757b14af002a9d79832f12de61bce Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len Impact: allow residual count implementation in ->pc_callback() rq->data_len has two duties - carrying the number of input bytes on issue and carrying residual count back to the issuer on completion. ide-atapi completion callback ->pc_callback() is the right place to do this but currently ide-atapi depends on rq->data_len carrying the original request size after calling ->pc_callback() to complete the pc request. This patch makes ide_pc_intr(), ide_tape_issue_pc() and ide_floppy_issue_pc() cache length to complete before calling ->pc_callback() so that it can modify rq->data_len as necessary. Note: As using rq->data_len for two purposes can make cases like this incorrect in subtle ways, future changes will introduce separate field for residual count. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 16 ++++++++++------ drivers/ide/ide-floppy.c | 5 ++++- drivers/ide/ide-tape.c | 5 ++++- 3 files changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 5cefe12f5622..3df5442de710 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -409,6 +409,16 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; + /* + * ->pc_callback() might change rq->data_len for + * residual count, cache total length. + */ + if (!blk_special_request(rq) && + (drive->media == ide_tape && !rq->bio)) + done = ide_rq_bytes(rq); /* FIXME */ + else + done = blk_rq_bytes(rq); + /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); @@ -417,7 +427,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if (blk_special_request(rq)) { rq->errors = 0; - done = blk_rq_bytes(rq); error = 0; } else { @@ -426,11 +435,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape && !rq->bio) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); - error = uptodate ? 0 : -EIO; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d20704ac3183..537b7c558033 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -134,14 +134,17 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) ide_floppy_report_error(floppy, pc); + /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2b9a13671c5f..8226d52504d0 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -622,6 +622,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FLAG_ABORT)) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + /* * We will "abort" retrying a packet command in case legitimate * error code was received (crossing a filemark, or end of the @@ -641,9 +643,10 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; } + drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3 From 35ab8d3251833e4052aa64b09b08195e949518c7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use single continuous buffer Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers ide-tape has its own multiple buffer mechanism using struct idetape_bh. It allocates buffer with decreasing order-of-two allocations so that it results in minimum number of segments. However, the implementation is quite complex and works in a way that no other block or ide driver works necessitating a lot of special case handling. The benefit this complex allocation scheme brings is questionable as PIO or DMA the number of segments (16 maximum) doesn't make any noticeable difference and it also doesn't negate the need for multiple order allocation which can fail under memory pressure or high fragmentation although it does lower the highest order necessary by one when the buffer size isn't power of two. As the first step to remove the custom buffer management, this patch makes ide-tape allocate single continous buffer. The maximum order is four. I doubt the change would cause any trouble but if it ever matters, it should be converted to regular sg mechanism like everyone else and even in that case dropping custom buffer handling and moving to standard mechanism first make sense as an intermediate step. This patch makes the first bh to contain the whole buffer and drops multi bh handling code. Following patches will make further changes. This patch has the side effect of killing OOM triggered by allocation path and fixing DMA transfers. Previously, bug in alloc path triggered OOM on command issue and commands were passed to DMA engine without DMA-mapping all the segments. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 256 +++++++++++-------------------------------------- 1 file changed, 58 insertions(+), 198 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8226d52504d0..b2afbc7bcb6b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -134,7 +134,6 @@ enum { struct idetape_bh { u32 b_size; atomic_t b_count; - struct idetape_bh *b_reqnext; char *b_data; }; @@ -228,10 +227,6 @@ typedef struct ide_tape_obj { char *b_data; int b_count; - int pages_per_buffer; - /* Wasted space in each stage */ - int excess_bh_size; - /* Measures average tape speed */ unsigned long avg_time; int avg_size; @@ -303,9 +298,7 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min( (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); @@ -313,15 +306,10 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + if (atomic_read(&bh->b_count) == bh->b_size) + pc->bh = NULL; } - pc->bh = bh; - return bcount; } @@ -331,22 +319,14 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min((unsigned int)pc->b_count, (unsigned int)bcount); drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); bcount -= count; pc->b_data += count; pc->b_count -= count; - if (!pc->b_count) { - bh = bh->b_reqnext; - pc->bh = bh; - if (bh) { - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - } - } + if (!pc->b_count) + pc->bh = NULL; } return bcount; @@ -355,24 +335,20 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; - int count; unsigned int bcount = pc->xferred; if (pc->flags & PC_FLAG_WRITING) return; - while (bcount) { - if (bh == NULL) { + if (bcount) { + if (bh == NULL || bcount > bh->b_size) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return; } - count = min((unsigned int)bh->b_size, (unsigned int)bcount); - atomic_set(&bh->b_count, count); + atomic_set(&bh->b_count, bcount); if (atomic_read(&bh->b_count) == bh->b_size) - bh = bh->b_reqnext; - bcount -= count; + pc->bh = NULL; } - pc->bh = bh; } /* @@ -439,24 +415,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) /* Free data buffers completely. */ static void ide_tape_kfree_buffer(idetape_tape_t *tape) { - struct idetape_bh *prev_bh, *bh = tape->merge_bh; - - while (bh) { - u32 size = bh->b_size; - - while (size) { - unsigned int order = fls(size >> PAGE_SHIFT)-1; - - if (bh->b_data) - free_pages((unsigned long)bh->b_data, order); + struct idetape_bh *bh = tape->merge_bh; - size &= (order-1); - bh->b_data += (1 << order) * PAGE_SIZE; - } - prev_bh = bh; - bh = bh->b_reqnext; - kfree(prev_bh); - } + kfree(bh->b_data); + kfree(bh); } static void ide_tape_handle_dsc(ide_drive_t *); @@ -861,117 +823,50 @@ out: } /* - * The function below uses __get_free_pages to allocate a data buffer of size - * tape->buffer_size (or a bit more). We attempt to combine sequential pages as - * much as possible. - * - * It returns a pointer to the newly allocated buffer, or NULL in case of - * failure. + * It returns a pointer to the newly allocated buffer, or NULL in case + * of failure. */ static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full, int clear) -{ - struct idetape_bh *prev_bh, *bh, *merge_bh; - int pages = tape->pages_per_buffer; - unsigned int order, b_allocd; - char *b_data = NULL; - - merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - bh = merge_bh; - if (bh == NULL) - goto abort; - - order = fls(pages) - 1; - bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!bh->b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - pages &= (order-1); - - if (clear) - memset(bh->b_data, 0, b_allocd); - bh->b_reqnext = NULL; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); + int full) +{ + struct idetape_bh *bh; - while (pages) { - order = fls(pages) - 1; - b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - - if (clear) - memset(b_data, 0, b_allocd); - - /* newly allocated page frames below buffer header or ...*/ - if (bh->b_data == b_data + b_allocd) { - bh->b_size += b_allocd; - bh->b_data -= b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - /* they are above the header */ - if (b_data == bh->b_data + bh->b_size) { - bh->b_size += b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - prev_bh = bh; - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) { - free_pages((unsigned long) b_data, order); - goto abort; - } - bh->b_reqnext = NULL; - bh->b_data = b_data; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - prev_bh->b_reqnext = bh; + bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + if (!bh) + return NULL; - pages &= (order-1); + bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!bh->b_data) { + kfree(bh); + return NULL; } - bh->b_size -= tape->excess_bh_size; - if (full) - atomic_sub(tape->excess_bh_size, &bh->b_count); - return merge_bh; -abort: - ide_tape_kfree_buffer(tape); - return NULL; + bh->b_size = tape->buffer_size; + atomic_set(&bh->b_count, full ? bh->b_size : 0); + + return bh; } static int idetape_copy_stage_from_user(idetape_tape_t *tape, const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min((unsigned int) - (bh->b_size - atomic_read(&bh->b_count)), - (unsigned int)n); if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - count)) + n)) ret = 1; - n -= count; - atomic_add(count, &bh->b_count); - buf += count; - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + atomic_add(n, &bh->b_count); + if (atomic_read(&bh->b_count) == bh->b_size) + tape->bh = NULL; } - tape->bh = bh; + return ret; } @@ -979,30 +874,20 @@ static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > tape->b_count) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min(tape->b_count, n); - if (copy_to_user(buf, tape->b_data, count)) + if (copy_to_user(buf, tape->b_data, n)) ret = 1; - n -= count; - tape->b_data += count; - tape->b_count -= count; - buf += count; - if (!tape->b_count) { - bh = bh->b_reqnext; - tape->bh = bh; - if (bh) { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } - } + tape->b_data += n; + tape->b_count -= n; + if (!tape->b_count) + tape->bh = NULL; } return ret; } @@ -1254,7 +1139,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks, min; + int blocks; struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { @@ -1269,31 +1154,16 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) if (tape->merge_bh_size) { blocks = tape->merge_bh_size / tape->blk_size; if (tape->merge_bh_size % tape->blk_size) { - unsigned int i; - + unsigned int i = tape->blk_size - + tape->merge_bh_size % tape->blk_size; blocks++; - i = tape->blk_size - tape->merge_bh_size % - tape->blk_size; - bh = tape->bh->b_reqnext; - while (bh) { - atomic_set(&bh->b_count, 0); - bh = bh->b_reqnext; - } bh = tape->bh; - while (i) { - if (bh == NULL) { - printk(KERN_INFO "ide-tape: bug," - " bh NULL\n"); - break; - } - min = min(i, (unsigned int)(bh->b_size - - atomic_read(&bh->b_count))); + if (bh) { memset(bh->b_data + atomic_read(&bh->b_count), - 0, min); - atomic_add(min, &bh->b_count); - i -= min; - bh = bh->b_reqnext; - } + 0, i); + atomic_add(i, &bh->b_count); + } else + printk(KERN_INFO "ide-tape: bug, bh NULL\n"); } (void) idetape_add_chrdev_write_request(drive, blocks); tape->merge_bh_size = 0; @@ -1321,7 +1191,7 @@ static int idetape_init_read(ide_drive_t *drive) " 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; @@ -1368,23 +1238,18 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh; + struct idetape_bh *bh = tape->merge_bh; int blocks; while (bcount) { unsigned int count; - bh = tape->merge_bh; count = min(tape->buffer_size, bcount); bcount -= count; blocks = count / tape->blk_size; - while (count) { - atomic_set(&bh->b_count, - min(count, (unsigned int)bh->b_size)); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - count -= atomic_read(&bh->b_count); - bh = bh->b_reqnext; - } + atomic_set(&bh->b_count, count); + memset(bh->b_data, 0, atomic_read(&bh->b_count)); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_bh); } @@ -1596,7 +1461,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, "should be 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; @@ -1970,7 +1835,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); if (tape->merge_bh != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); @@ -2201,11 +2066,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->buffer_size = *ctl * tape->blk_size; } buffer_size = tape->buffer_size; - tape->pages_per_buffer = buffer_size / PAGE_SIZE; - if (buffer_size % PAGE_SIZE) { - tape->pages_per_buffer++; - tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE; - } /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); -- cgit v1.2.3 From 21d9c5d227593d15630ae83a336d1519653e9b8a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use standard data transfer mechanism Impact: use standard way to transfer data ide-tape uses rq in an interesting way. For r/w requests, rq->special is used to carry a private buffer management structure idetape_bh and rq->nr_sectors and current_nr_sectors are initialized to the number of idetape blocks which isn't necessary 512 bytes. Also, rq->current_nr_sectors is used to report back the residual count in units of idetape blocks. This peculiarity taxes both block layer and ide. ide-atapi has different paths and hooks to accomodate it and what a rq means becomes quite confusing and making changes at the block layer becomes quite difficult and error-prone. This patch makes ide-tape use bio instead. With the previous patch, ide-tape currently is using single contiguos buffer so replacing it isn't difficult. Data buffer is mapped into bio using blk_rq_map_kern() in idetape_queue_rw_tail(). idetape_io_buffers() and idetape_update_buffers() are dropped and pc->bh is set to null to tell ide-atapi to use standard data transfer mechanism and idetape_bh byte counts are updated by the issuer on completion using the residual count. This change also nicely removes the FIXME in ide_pc_intr() where ide-tape rqs need to be completed using ide_rq_bytes() instead of blk_rq_bytes() (although this didn't really matter as the request didn't have bio). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 6 +-- drivers/ide/ide-tape.c | 112 ++++++++++-------------------------------------- 2 files changed, 24 insertions(+), 94 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 3df5442de710..b9dd4503cbc7 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -413,11 +413,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) * ->pc_callback() might change rq->data_len for * residual count, cache total length. */ - if (!blk_special_request(rq) && - (drive->media == ide_tape && !rq->bio)) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); + done = blk_rq_bytes(rq); /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b2afbc7bcb6b..b373ac876352 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -292,65 +292,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min( - (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), - bcount); - drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data + - atomic_read(&bh->b_count), count); - bcount -= count; - atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } - - return bcount; -} - -static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min((unsigned int)pc->b_count, (unsigned int)bcount); - drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); - bcount -= count; - pc->b_data += count; - pc->b_count -= count; - if (!pc->b_count) - pc->bh = NULL; - } - - return bcount; -} - -static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct idetape_bh *bh = pc->bh; - unsigned int bcount = pc->xferred; - - if (pc->flags & PC_FLAG_WRITING) - return; - if (bcount) { - if (bh == NULL || bcount > bh->b_size) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return; - } - atomic_set(&bh->b_count, bcount); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } -} - /* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. @@ -368,12 +309,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) pc->c[0], tape->sense_key, tape->asc, tape->ascq); /* Correct pc->xferred by asking the tape. */ - if (pc->flags & PC_FLAG_DMA_ERROR) { + if (pc->flags & PC_FLAG_DMA_ERROR) pc->xferred = pc->req_xfer - tape->blk_size * get_unaligned_be32(&sense[3]); - idetape_update_buffers(drive, pc); - } /* * If error was the result of a zero-length read or write command, @@ -458,7 +397,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; + rq->data_len -= blocks * tape->blk_size; if (pc->error) { uptodate = 0; @@ -520,19 +459,6 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - unsigned int bleft; - - if (write) - bleft = idetape_output_buffers(drive, pc, bcount); - else - bleft = idetape_input_buffers(drive, pc, bcount); - - return bcount - bleft; -} - /* * Packet Command Interface * @@ -683,7 +609,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = bh; + pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; @@ -1063,10 +989,12 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; + size_t size = blocks * tape->blk_size; struct request *rq; - int ret, errors; + int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -1074,21 +1002,29 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->rq_disk = tape->disk; rq->special = (void *)bh; rq->sector = tape->first_frame; - rq->nr_sectors = blocks; - rq->current_nr_sectors = blocks; + + if (size) { + ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + __GFP_WAIT); + if (ret) + goto out_put; + } + blk_execute_rq(drive->queue, tape->disk, rq, 0); - errors = rq->errors; - ret = tape->blk_size * (blocks - rq->current_nr_sectors); - blk_put_request(rq); + /* calculate the number of transferred bytes and update bh */ + size -= rq->data_len; + if (cmd == REQ_IDETAPE_READ) + atomic_add(size, &bh->b_count); - if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) - return 0; + ret = size; + if (rq->errors == IDE_DRV_ERROR_GENERAL) + ret = -EIO; if (tape->merge_bh) idetape_init_merge_buffer(tape); - if (errors == IDE_DRV_ERROR_GENERAL) - return -EIO; +out_put: + blk_put_request(rq); return ret; } @@ -2034,8 +1970,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) u16 *ctl = (u16 *)&tape->caps[12]; drive->pc_callback = ide_tape_callback; - drive->pc_update_buffers = idetape_update_buffers; - drive->pc_io_buffers = ide_tape_io_buffers; drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; -- cgit v1.2.3 From 963da55c4b9eeeb2085ca74ba927cf77bce966d4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: kill idetape_bh Impact: kill now unnecessary idetape_bh With everything using standard mechanisms, there is no need for idetape_bh anymore. Kill it and use tape->buf, cur and valid to describe data buffer instead. Changes worth mentioning are... * idetape_queue_rq_tail() now always queue tape->buf and and adjusts buffer state properly before completion. * idetape_pad_zeros() clears the buffer only once. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 305 ++++++++++++++----------------------------------- 1 file changed, 84 insertions(+), 221 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b373ac876352..d2e9c09b5215 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -131,12 +131,6 @@ enum { IDETAPE_DIR_WRITE = (1 << 2), }; -struct idetape_bh { - u32 b_size; - atomic_t b_count; - char *b_data; -}; - /* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 @@ -218,14 +212,12 @@ typedef struct ide_tape_obj { /* Data buffer size chosen based on the tape's recommendation */ int buffer_size; - /* merge buffer */ - struct idetape_bh *merge_bh; - /* size of the merge buffer */ - int merge_bh_size; - /* pointer to current buffer head within the merge buffer */ - struct idetape_bh *bh; - char *b_data; - int b_count; + /* Staging buffer of buffer_size bytes */ + void *buf; + /* The read/write cursor */ + void *cur; + /* The number of valid bytes in buf */ + size_t valid; /* Measures average tape speed */ unsigned long avg_time; @@ -351,15 +343,6 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } -/* Free data buffers completely. */ -static void ide_tape_kfree_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - - kfree(bh->b_data); - kfree(bh); -} - static void ide_tape_handle_dsc(ide_drive_t *); static int ide_tape_callback(ide_drive_t *drive, int dsc) @@ -603,8 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - struct idetape_bh *bh = (struct idetape_bh *)rq->special; - unsigned int length = rq->current_nr_sectors; + unsigned int length = rq->nr_sectors; ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); @@ -616,14 +598,11 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; - if (opcode == READ_6) { + if (opcode == READ_6) pc->c[0] = READ_6; - atomic_set(&bh->b_count, 0); - } else if (opcode == WRITE_6) { + else if (opcode == WRITE_6) { pc->c[0] = WRITE_6; pc->flags |= PC_FLAG_WRITING; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); } memcpy(rq->cmd, pc->c, 12); @@ -639,10 +618,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu," - " current_nr_sectors: %u\n", - (unsigned long long)rq->sector, rq->nr_sectors, - rq->current_nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" + (unsigned long long)rq->sector, rq->nr_sectors); if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ @@ -748,89 +725,6 @@ out: return ide_tape_issue_pc(drive, &cmd, pc); } -/* - * It returns a pointer to the newly allocated buffer, or NULL in case - * of failure. - */ -static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full) -{ - struct idetape_bh *bh; - - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) - return NULL; - - bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!bh->b_data) { - kfree(bh); - return NULL; - } - - bh->b_size = tape->buffer_size; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - - return bh; -} - -static int idetape_copy_stage_from_user(idetape_tape_t *tape, - const char __user *buf, int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - n)) - ret = 1; - atomic_add(n, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - tape->bh = NULL; - } - - return ret; -} - -static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > tape->b_count) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_to_user(buf, tape->b_data, n)) - ret = 1; - tape->b_data += n; - tape->b_count -= n; - if (!tape->b_count) - tape->bh = NULL; - } - return ret; -} - -static void idetape_init_merge_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - tape->bh = tape->merge_bh; - - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) - atomic_set(&bh->b_count, 0); - else { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } -} - /* * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. @@ -928,10 +822,10 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) return; clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags); - tape->merge_bh_size = 0; - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + tape->valid = 0; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; @@ -985,8 +879,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, - struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) { idetape_tape_t *tape = drive->driver_data; size_t size = blocks * tape->blk_size; @@ -1000,11 +893,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->special = (void *)bh; rq->sector = tape->first_frame; if (size) { - ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, __GFP_WAIT); if (ret) goto out_put; @@ -1012,17 +904,17 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, blk_execute_rq(drive->queue, tape->disk, rq, 0); - /* calculate the number of transferred bytes and update bh */ + /* calculate the number of transferred bytes and update buffer state */ size -= rq->data_len; + tape->cur = tape->buf; if (cmd == REQ_IDETAPE_READ) - atomic_add(size, &bh->b_count); + tape->valid = size; + else + tape->valid = 0; ret = size; if (rq->errors == IDE_DRV_ERROR_GENERAL) ret = -EIO; - - if (tape->merge_bh) - idetape_init_merge_buffer(tape); out_put: blk_put_request(rq); return ret; @@ -1064,49 +956,33 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) /* Queue up a character device originated write request. */ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks; - struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" " but we are not writing.\n"); return; } - if (tape->merge_bh_size > tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); - tape->merge_bh_size = tape->buffer_size; - } - if (tape->merge_bh_size) { - blocks = tape->merge_bh_size / tape->blk_size; - if (tape->merge_bh_size % tape->blk_size) { - unsigned int i = tape->blk_size - - tape->merge_bh_size % tape->blk_size; + if (tape->buf) { + blocks = tape->valid / tape->blk_size; + if (tape->valid % tape->blk_size) { blocks++; - bh = tape->bh; - if (bh) { - memset(bh->b_data + atomic_read(&bh->b_count), - 0, i); - atomic_add(i, &bh->b_count); - } else - printk(KERN_INFO "ide-tape: bug, bh NULL\n"); + memset(tape->buf + tape->valid, 0, + tape->blk_size - tape->valid % tape->blk_size); } (void) idetape_add_chrdev_write_request(drive, blocks); - tape->merge_bh_size = 0; } - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; } @@ -1122,15 +998,15 @@ static int idetape_init_read(ide_drive_t *drive) ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size should be" - " 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; + tape->cur = tape->buf; /* * Issue a read 0 command to ensure that DSC handshake is @@ -1140,11 +1016,10 @@ static int idetape_init_read(ide_drive_t *drive) */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0, - tape->merge_bh); + REQ_IDETAPE_READ, 0); if (bytes_read < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } @@ -1157,8 +1032,6 @@ static int idetape_init_read(ide_drive_t *drive) /* called from idetape_chrdev_read() to service a chrdev read request. */ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); /* If we are at a filemark, return a read length of 0 */ @@ -1167,27 +1040,21 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_read(drive); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh = tape->merge_bh; - int blocks; + + memset(tape->buf, 0, tape->buffer_size); while (bcount) { - unsigned int count; + unsigned int count = min(tape->buffer_size, bcount); - count = min(tape->buffer_size, bcount); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + count / tape->blk_size); bcount -= count; - blocks = count / tape->blk_size; - atomic_set(&bh->b_count, count); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, - tape->merge_bh); } } @@ -1267,7 +1134,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - tape->merge_bh_size = 0; + tape->valid = 0; if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) ++count; ide_tape_discard_merge_buffer(drive, 0); @@ -1333,20 +1200,20 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, return rc; if (count == 0) return (0); - if (tape->merge_bh_size) { - actually_read = min((unsigned int)(tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, actually_read)) + if (tape->valid) { + actually_read = min_t(unsigned int, tape->valid, count); + if (copy_to_user(buf, tape->cur, actually_read)) ret = -EFAULT; buf += actually_read; - tape->merge_bh_size -= actually_read; count -= actually_read; + tape->cur += actually_read; + tape->valid -= actually_read; } while (count >= tape->buffer_size) { bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, bytes_read)) + if (copy_to_user(buf, tape->cur, bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -1357,10 +1224,11 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, temp)) + if (copy_to_user(buf, tape->cur, temp)) ret = -EFAULT; actually_read += temp; - tape->merge_bh_size = bytes_read-temp; + tape->cur += temp; + tape->valid -= temp; } finish: if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { @@ -1392,16 +1260,15 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { if (tape->chrdev_dir == IDETAPE_DIR_READ) ide_tape_discard_merge_buffer(drive, 1); - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size " - "should be 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; - idetape_init_merge_buffer(tape); + tape->cur = tape->buf; /* * Issue a write 0 command to ensure that DSC handshake is @@ -1411,11 +1278,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0, - tape->merge_bh); + REQ_IDETAPE_WRITE, 0); if (retval < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } @@ -1423,23 +1289,19 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count == 0) return (0); - if (tape->merge_bh_size) { - if (tape->merge_bh_size >= tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); - tape->merge_bh_size = 0; - } - actually_written = min((unsigned int) - (tape->buffer_size - tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_from_user(tape, buf, actually_written)) - ret = -EFAULT; + if (tape->valid < tape->buffer_size) { + actually_written = min_t(unsigned int, + tape->buffer_size - tape->valid, + count); + if (copy_from_user(tape->cur, buf, actually_written)) + ret = -EFAULT; buf += actually_written; - tape->merge_bh_size += actually_written; count -= actually_written; + tape->cur += actually_written; + tape->valid += actually_written; - if (tape->merge_bh_size == tape->buffer_size) { + if (tape->valid == tape->buffer_size) { ssize_t retval; - tape->merge_bh_size = 0; retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); @@ -1447,7 +1309,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } while (count >= tape->buffer_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size)) + if (copy_from_user(tape->cur, buf, tape->buffer_size)) ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; @@ -1458,9 +1320,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, buf, count)) + if (copy_from_user(tape->cur, buf, count)) ret = -EFAULT; - tape->merge_bh_size += count; + tape->cur += count; + tape->valid += count; } return ret ? ret : actually_written; } @@ -1623,7 +1486,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = tape->merge_bh_size / + block_offset = tape->valid / (tape->blk_size * tape->user_bs_factor); position = idetape_read_position(drive); if (position < 0) @@ -1771,12 +1634,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); - if (tape->merge_bh != NULL) { + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (tape->buf != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; } idetape_write_filemark(drive); idetape_flush_tape_buffers(drive); @@ -2042,7 +1905,7 @@ static void ide_tape_release(struct device *dev) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->merge_bh_size); + BUG_ON(tape->valid); drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; -- cgit v1.2.3 From 88f1b941c5c94016a59144a3c94c9ca31eb16205 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: unify r/w init paths Impact: cleanup Read and write init paths are almost identical. Unify them into idetape_init_rw(). Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 110 +++++++++++++++++++++---------------------------- 1 file changed, 46 insertions(+), 64 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d2e9c09b5215..4da7fa9bca1e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -987,42 +987,50 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) tape->chrdev_dir = IDETAPE_DIR_NONE; } -static int idetape_init_read(ide_drive_t *drive) +static int idetape_init_rw(ide_drive_t *drive, int dir) { idetape_tape_t *tape = drive->driver_data; - int bytes_read; + int rc; - /* Initialize read operation */ - if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - ide_tape_flush_merge_buffer(drive); - idetape_flush_tape_buffers(drive); - } - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_READ; - tape->cur = tape->buf; + BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE); - /* - * Issue a read 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. - * No point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0); - if (bytes_read < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return bytes_read; - } + if (tape->chrdev_dir == dir) + return 0; + + if (tape->chrdev_dir == IDETAPE_DIR_READ) + ide_tape_discard_merge_buffer(drive, 1); + else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { + ide_tape_flush_merge_buffer(drive); + idetape_flush_tape_buffers(drive); + } + + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; + } + + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) + return -ENOMEM; + tape->chrdev_dir = dir; + tape->cur = tape->buf; + + /* + * Issue a 0 rw command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. + */ + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { + int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ + : REQ_IDETAPE_WRITE; + + rc = idetape_queue_rw_tail(drive, cmd, 0); + if (rc < 0) { + kfree(tape->buf); + tape->buf = NULL; + tape->chrdev_dir = IDETAPE_DIR_NONE; + return rc; } } @@ -1038,7 +1046,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) return 0; - idetape_init_read(drive); + idetape_init_rw(drive, IDETAPE_DIR_READ); return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } @@ -1195,7 +1203,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive); + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; if (count == 0) @@ -1249,6 +1257,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ssize_t actually_written = 0; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; + int rc; /* The drive is write protected. */ if (tape->write_prot) @@ -1257,36 +1266,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - if (tape->chrdev_dir == IDETAPE_DIR_READ) - ide_tape_discard_merge_buffer(drive, 1); - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_WRITE; - tape->cur = tape->buf; - - /* - * Issue a write 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. No - * point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0); - if (retval < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return retval; - } - } - } + rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); + if (rc < 0) + return rc; if (count == 0) return (0); if (tape->valid < tape->buffer_size) { -- cgit v1.2.3 From 6bb11dd14f70228f8dab25fd25dabeb9bc74926d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: use byte size instead of sectors on rw issue functions Impact: cleanup Byte size is what most issue functions deal with, make idetape_queue_rw_tail() and its wrappers take byte size instead of sector counts. idetape_chrdev_read() and write() functions are converted to use tape->buffer_size instead of ctl from tape->cap. This cleans up code a little bit and will ease the next r/w reimplementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 45 ++++++++++++++++++++------------------------- 1 file changed, 20 insertions(+), 25 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 4da7fa9bca1e..d5e9bb286e30 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -879,15 +879,15 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) { idetape_tape_t *tape = drive->driver_data; - size_t size = blocks * tape->blk_size; struct request *rq; int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); + BUG_ON(size < 0 || size % tape->blk_size); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -954,17 +954,16 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) } /* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) { debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" @@ -972,15 +971,10 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) return; } if (tape->buf) { - blocks = tape->valid / tape->blk_size; - if (tape->valid % tape->blk_size) { - blocks++; - memset(tape->buf + tape->valid, 0, - tape->blk_size - tape->valid % tape->blk_size); - } - (void) idetape_add_chrdev_write_request(drive, blocks); - } - if (tape->buf != NULL) { + size_t aligned = roundup(tape->valid, tape->blk_size); + + memset(tape->cur, 0, aligned - tape->valid); + idetape_add_chrdev_write_request(drive, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1038,9 +1032,9 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) } /* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) { - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); + debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); /* If we are at a filemark, return a read length of 0 */ if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) @@ -1048,7 +1042,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_rw(drive, IDETAPE_DIR_READ); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) @@ -1060,8 +1054,7 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) while (bcount) { unsigned int count = min(tape->buffer_size, bcount); - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - count / tape->blk_size); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count); bcount -= count; } } @@ -1193,7 +1186,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, ide_drive_t *drive = tape->drive; ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1218,7 +1210,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, tape->valid -= actually_read; } while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; if (copy_to_user(buf, tape->cur, bytes_read)) @@ -1228,7 +1221,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, actually_read += bytes_read; } if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); @@ -1256,7 +1250,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; int rc; /* The drive is write protected. */ @@ -1284,7 +1277,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->valid == tape->buffer_size) { ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); if (retval <= 0) return (retval); } @@ -1295,7 +1289,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); actually_written += tape->buffer_size; if (retval <= 0) return (retval); -- cgit v1.2.3 From 07bd9686c50c2b1f10e48089d4fb836a971f5177 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: simplify read/write functions Impact: cleanup idetape_chrdev_read/write() functions are unnecessarily complex when everything can be handled in a single loop. Collapse idetape_add_chrdev_read/write_request() into the rw functions and simplify the implementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 149 +++++++++++++++++-------------------------------- 1 file changed, 50 insertions(+), 99 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d5e9bb286e30..2599579e4174 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -953,14 +953,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -/* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); -} - static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -974,7 +966,7 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) size_t aligned = roundup(tape->valid, tape->blk_size); memset(tape->cur, 0, aligned - tape->valid); - idetape_add_chrdev_write_request(drive, aligned); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1031,20 +1023,6 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) return 0; } -/* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); - - /* If we are at a filemark, return a read length of 0 */ - if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) - return 0; - - idetape_init_rw(drive, IDETAPE_DIR_READ); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); -} - static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; @@ -1184,8 +1162,9 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t bytes_read, temp, actually_read = 0, rc; + size_t done = 0; ssize_t ret = 0; + int rc; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1195,52 +1174,43 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid) { - actually_read = min_t(unsigned int, tape->valid, count); - if (copy_to_user(buf, tape->cur, actually_read)) - ret = -EFAULT; - buf += actually_read; - count -= actually_read; - tape->cur += actually_read; - tape->valid -= actually_read; - } - while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - if (copy_to_user(buf, tape->cur, bytes_read)) - ret = -EFAULT; - buf += bytes_read; - count -= bytes_read; - actually_read += bytes_read; - } - if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - temp = min((unsigned long)count, (unsigned long)bytes_read); - if (copy_to_user(buf, tape->cur, temp)) + + while (done < count) { + size_t todo; + + /* refill if staging buffer is empty */ + if (!tape->valid) { + /* If we are at a filemark, nothing more to read */ + if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) + break; + /* read */ + if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, + tape->buffer_size) <= 0) + break; + } + + /* copy out */ + todo = min_t(size_t, count - done, tape->valid); + if (copy_to_user(buf + done, tape->cur, todo)) ret = -EFAULT; - actually_read += temp; - tape->cur += temp; - tape->valid -= temp; + + tape->cur += todo; + tape->valid -= todo; + done += todo; } -finish: - if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { + + if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } - return ret ? ret : actually_read; + return ret ? ret : done; } static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, @@ -1248,7 +1218,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t actually_written = 0; + size_t done = 0; ssize_t ret = 0; int rc; @@ -1262,47 +1232,28 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid < tape->buffer_size) { - actually_written = min_t(unsigned int, - tape->buffer_size - tape->valid, - count); - if (copy_from_user(tape->cur, buf, actually_written)) - ret = -EFAULT; - buf += actually_written; - count -= actually_written; - tape->cur += actually_written; - tape->valid += actually_written; - - if (tape->valid == tape->buffer_size) { - ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - if (retval <= 0) - return (retval); - } - } - while (count >= tape->buffer_size) { - ssize_t retval; - if (copy_from_user(tape->cur, buf, tape->buffer_size)) - ret = -EFAULT; - buf += tape->buffer_size; - count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - actually_written += tape->buffer_size; - if (retval <= 0) - return (retval); - } - if (count) { - actually_written += count; - if (copy_from_user(tape->cur, buf, count)) + + while (done < count) { + size_t todo; + + /* flush if staging buffer is full */ + if (tape->valid == tape->buffer_size && + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + tape->buffer_size) <= 0) + return rc; + + /* copy in */ + todo = min_t(size_t, count - done, + tape->buffer_size - tape->valid); + if (copy_from_user(tape->cur, buf + done, todo)) ret = -EFAULT; - tape->cur += count; - tape->valid += count; + + tape->cur += todo; + tape->valid += todo; + done += todo; } - return ret ? ret : actually_written; + + return ret ? ret : done; } static int idetape_write_filemark(ide_drive_t *drive) -- cgit v1.2.3 From 6d7003877c2f0578f1c08f66d05c3f72ef4ae596 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-atapi: kill unused fields and callbacks Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 17 ++++------------- drivers/ide/ide-tape.c | 1 - include/linux/ide.h | 12 ------------ 3 files changed, 4 insertions(+), 26 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index b9dd4503cbc7..afe5a4323879 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -359,11 +359,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) drive->name, rq_data_dir(pc->rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; - } else { + } else pc->xferred = pc->req_xfer; - if (drive->pc_update_buffers) - drive->pc_update_buffers(drive, pc); - } debug_log("%s: DMA finished\n", drive->name); } @@ -463,16 +460,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - if (drive->media == ide_tape && pc->bh) - done = drive->pc_io_buffers(drive, pc, bcount, write); - else { - done = min_t(unsigned int, bcount, cmd->nleft); - ide_pio_bytes(drive, cmd, write, done); - } + done = min_t(unsigned int, bcount, cmd->nleft); + ide_pio_bytes(drive, cmd, write, done); - /* Update the current position */ + /* Update transferred byte count */ pc->xferred += done; - pc->cur_pos += done; bcount -= done; @@ -650,7 +642,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) /* We haven't transferred any data yet */ pc->xferred = 0; - pc->cur_pos = pc->buf; valid_tf = IDE_VALID_DEVICE; bcount = ((drive->media == ide_tape) ? diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2599579e4174..8dfc68892d6a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -591,7 +591,6 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; diff --git a/include/linux/ide.h b/include/linux/ide.h index 1957461ac762..34c128f0a33c 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -362,11 +362,7 @@ struct ide_atapi_pc { /* data buffer */ u8 *buf; - /* current buffer position */ - u8 *cur_pos; int buf_size; - /* missing/available data on the current buffer */ - int b_count; /* the corresponding request */ struct request *rq; @@ -379,10 +375,6 @@ struct ide_atapi_pc { */ u8 pc_buf[IDE_PC_BUFFER_SIZE]; - /* idetape only */ - struct idetape_bh *bh; - char *b_data; - unsigned long timeout; }; @@ -595,10 +587,6 @@ struct ide_drive_s { /* callback for packet commands */ int (*pc_callback)(struct ide_drive_s *, int); - void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *); - int (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *, - unsigned int, int); - ide_startstop_t (*irq_handler)(struct ide_drive_s *); unsigned long atapi_flags; -- cgit v1.2.3 From 2c316bb57ad4e9f0f3de2d7ef1ae85530c2a7e69 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide: drop rq->data handling from ide_map_sg() Impact: remove code path which is no longer necessary All IDE data transfers now use rq->bio. Simplify ide_map_sg() accordingly. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6e3094e22775..a0309ea661ac 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,11 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (!rq->bio) { - sg_init_one(sg, rq->data, rq->data_len); - cmd->sg_nents = 1; - } else - cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); + cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } EXPORT_SYMBOL_GPL(ide_map_sg); -- cgit v1.2.3 From 2ecf0a57c60dcb588f310d94412118e15c510532 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Apr 2009 12:16:56 +0900 Subject: ide-dma: don't reset request fields on dma_timeout_retry() Impact: drop unnecessary code Now that everything uses bio and block operations, there is no need to reset request fields manually when retrying a request. Every field is guaranteed to be always valid. Drop unnecessary request field resetting from ide_dma_timeout_retry(). Signed-off-by: Tejun Heo --- drivers/ide/ide-dma.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index a0b8cab1d9a6..d9123ecae4a9 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -510,23 +510,11 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) /* * un-busy drive etc and make sure request is sane */ - rq = hwif->rq; - if (!rq) - goto out; - - hwif->rq = NULL; - - rq->errors = 0; - - if (!rq->bio) - goto out; - - rq->sector = rq->bio->bi_sector; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->buffer = bio_data(rq->bio); -out: + if (rq) { + hwif->rq = NULL; + rq->errors = 0; + } return ret; } -- cgit v1.2.3 From 03682411b1ccd38cbde2e9a6ab43884ff34fbefc Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 30 Apr 2009 18:38:01 +0200 Subject: alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC Some time ago we had to disable init_hwif callback for PowerPC builds. That was because of a historical IRQ overwrite in the driver, which was causing IDE malfunction on the MPC8610HPCD PowerPC boards. It's unclear whether this overwrite is still useful, but it is proven to cause a bit of harm, and today some PowerPC targets (Xilinx ML510, as reported by Roderick Colenbrander) need the init_hwif, so we have to re-enable it and remove the overwrite. Reported-by: Roderick Colenbrander Suggested-by: Bartlomiej Zolnierkiewicz Cc: Benjamin Herrenschmidt Signed-off-by: Anton Vorontsov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 537da1cde16d..e59b6dee9ae2 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -402,27 +402,23 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) return cbl; } -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) +#ifndef CONFIG_SPARC64 /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure * * Obtain the IRQ tables for an ALi based IDE solution on the PC * class platforms. This part of the code isn't applicable to the - * Sparc and PowerPC systems. + * Sparc systems. */ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); u8 ideic, inmir; s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; int irq = -1; - if (dev->device == PCI_DEVICE_ID_AL_M5229) - hwif->irq = hwif->channel ? 15 : 14; - if (isa_dev) { /* * read IDE interface control @@ -455,7 +451,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) } #else #define init_hwif_ali15x3 NULL -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ +#endif /* CONFIG_SPARC64 */ /** * init_dma_ali15x3 - set up DMA on ALi15x3 -- cgit v1.2.3 From e8e7526c3c0863be25ab03a0871ee0978de5ba50 Mon Sep 17 00:00:00 2001 From: Mark de Wever Date: Sun, 17 May 2009 17:22:53 +0200 Subject: ide-tape: fix debug call This error only occurs when IDETAPE_DEBUG_LOG is enabled. Signed-off-by: Mark de Wever Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8dfc68892d6a..203bbeac182f 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -617,7 +617,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n", (unsigned long long)rq->sector, rq->nr_sectors); if (!(blk_special_request(rq) || blk_sense_request(rq))) { -- cgit v1.2.3