From 21b824771309927172247546b0bff0c4e6831875 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 3 Mar 2007 17:48:52 +0100
Subject: alim15x3: fix PIO mode setup

The driver's tuneproc() method fails to set the drive's own speed -- fix this
by renaming the function to ali15x3_tune_pio() and "wrapping" the new tuneproc()
method around it and making it return the mode set, update the heading comment.

Also, setting PIO mode via the speedproc() method does not work due to passing
to the tuneproc() method's a mode number not biased by XFER_PIO_0 -- fix this
along with a typo in the heading comment...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/alim15x3.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 4debd18d52f8..83e0aa65a431 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/alim15x3.c		Version 0.17	2003/01/02
+ * linux/drivers/ide/pci/alim15x3.c		Version 0.21	2007/02/03
  *
  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -9,6 +9,7 @@
  *  May be copied or modified under the terms of the GNU General Public License
  *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
  *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
+ *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
  *
  *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
  *
@@ -280,15 +281,17 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
 #endif  /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */
 
 /**
- *	ali15x3_tune_drive	-	set up a drive
+ *	ali15x3_tune_pio	-	set up chipset for PIO mode
  *	@drive: drive to tune
- *	@pio: unused
+ *	@pio: desired mode
  *
- *	Select the best PIO timing for the drive in question. Then
- *	program the controller for this drive set up
+ *	Select the best PIO mode for the drive in question.
+ *	Then program the controller for this mode.
+ *
+ *	Returns the PIO mode programmed.
  */
  
-static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
 {
 	ide_pio_data_t d;
 	ide_hwif_t *hwif = HWIF(drive);
@@ -356,6 +359,22 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
 	 * { 20,   50,     30  }    PIO Mode 5 with IORDY (nonstandard)
 	 */
 
+	return pio;
+}
+
+/**
+ *	ali15x3_tune_drive	-	set up drive for PIO mode
+ *	@drive: drive to tune
+ *	@pio: desired mode
+ *
+ *	Program the controller with the best PIO timing for the given drive.
+ *	Then set up the drive itself.
+ */
+
+static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	pio = ali15x3_tune_pio(drive, pio);
+	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 /**
@@ -430,7 +449,7 @@ static u8 ali15x3_ratemask (ide_drive_t *drive)
 }
 
 /**
- *	ali15x3_tune_chipset	-	set up chiset for new speed
+ *	ali15x3_tune_chipset	-	set up chipset/drive for new speed
  *	@drive: drive to configure for
  *	@xferspeed: desired speed
  *
@@ -461,7 +480,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		pci_write_config_byte(dev, m5229_udma, tmpbyte);
 
 		if (speed < XFER_SW_DMA_0)
-			ali15x3_tune_drive(drive, speed);
+			(void) ali15x3_tune_pio(drive, speed - XFER_PIO_0);
 	} else {
 		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
 		tmpbyte &= (0x0f << ((1-unit) << 2));
-- 
cgit v1.2.3


From f92d50e6fd14f6e4601f59aac4cffe617b7b2ce6 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 3 Mar 2007 17:48:53 +0100
Subject: cmd64x: fix PIO mode setup (take 3)

The driver's tuneproc() method fails to set the drive's own speed -- fix this
by renaming the function to cmd64x_tune_pio(), making it return the mode set,
and "wrapping" the new tuneproc() method around it; while at it, also get rid
of the non-working prefetch control code (filtering out related argument values
in the "wrapper"), remove redundant PIO5 mode limitation, make cmdprintk() give
more sensible mode info, and remove mention about the obsolete /proc/ interface.
Get rid of the broken config_chipset_for_pio() which always tried to set PIO4,
switch to always auto-tuning PIO instead.
Oh, and add the missing PIO5 support to the speedproc() method while at it. :-)

Warning: compile tested only -- getting to the real hardware isn't that easy...

On Tuesday 06 February 2007 22:11, Mikael Pettersson <mikpe@it.uu.se> wrote:
>
> Worked fine on my SPARC Ultra5 with a CMD646 IDE controller.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cmd64x.c | 108 +++++++++++++++++++----------------------------
 1 file changed, 43 insertions(+), 65 deletions(-)

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 49df27513da7..b0d4825c56a9 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,6 +1,6 @@
 /* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16
  *
- * linux/drivers/ide/pci/cmd64x.c		Version 1.30	Sept 10, 2002
+ * linux/drivers/ide/pci/cmd64x.c		Version 1.41	Feb 3, 2007
  *
  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
  *           Note, this driver is not used at all on other systems because
@@ -12,6 +12,7 @@
  * Copyright (C) 1998		David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
  */
 
 #include <linux/module.h>
@@ -262,43 +263,25 @@ static void program_drive_counts (ide_drive_t *drive, int setup_count, int activ
 }
 
 /*
- * Attempts to set the interface PIO mode.
- * The preferred method of selecting PIO modes (e.g. mode 4) is 
- * "echo 'piomode:4' > /proc/ide/hdx/settings".  Special cases are
- * 8: prefetch off, 9: prefetch on, 255: auto-select best mode.
- * Called with 255 at boot time.
+ * This routine selects drive's best PIO mode, calculates setup/active/recovery
+ * counts, and then writes them into the chipset registers.
  */
-
-static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
+static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
 {
 	int setup_time, active_time, recovery_time;
 	int clock_time, pio_mode, cycle_time;
 	u8 recovery_count2, cycle_count;
 	int setup_count, active_count, recovery_count;
 	int bus_speed = system_bus_clock();
-	/*byte b;*/
 	ide_pio_data_t  d;
 
-	switch (mode_wanted) {
-		case 8: /* set prefetch off */
-		case 9: /* set prefetch on */
-			mode_wanted &= 1;
-			/*set_prefetch_mode(index, mode_wanted);*/
-			cmdprintk("%s: %sabled cmd640 prefetch\n",
-				drive->name, mode_wanted ? "en" : "dis");
-			return;
-	}
-
-	mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
-	pio_mode = d.pio_mode;
+	pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &d);
 	cycle_time = d.cycle_time;
 
 	/*
 	 * I copied all this complicated stuff from cmd640.c and made a few
 	 * minor changes.  For now I am just going to pray that it is correct.
 	 */
-	if (pio_mode > 5)
-		pio_mode = 5;
 	setup_time  = ide_pio_timings[pio_mode].setup_time;
 	active_time = ide_pio_timings[pio_mode].active_time;
 	recovery_time = cycle_time - (setup_time + active_time);
@@ -320,22 +303,33 @@ static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
 	if (active_count > 16)
 		active_count = 16; /* maximum allowed by cmd646 */
 
-	/*
-	 * In a perfect world, we might set the drive pio mode here
-	 * (using WIN_SETFEATURE) before continuing.
-	 *
-	 * But we do not, because:
-	 *	1) this is the wrong place to do it
-	 *		(proper is do_special() in ide.c)
-	 * 	2) in practice this is rarely, if ever, necessary
-	 */
 	program_drive_counts (drive, setup_count, active_count, recovery_count);
 
-	cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, "
+	cmdprintk("%s: PIO mode wanted %d, selected %d (%dns)%s, "
 		"clocks=%d/%d/%d\n",
-		drive->name, pio_mode, mode_wanted, cycle_time,
+		drive->name, mode_wanted, pio_mode, cycle_time,
 		d.overridden ? " (overriding vendor mode)" : "",
 		setup_count, active_count, recovery_count);
+
+	return pio_mode;
+}
+
+/*
+ * Attempts to set drive's PIO mode.
+ * Special cases are 8: prefetch off, 9: prefetch on (both never worked),
+ * and 255: auto-select best mode (used at boot time).
+ */
+static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	/*
+	 * Filter out the prefetch control values
+	 * to prevent PIO5 from being programmed
+	 */
+	if (pio == 8 || pio == 9)
+		return;
+
+	pio = cmd64x_tune_pio(drive, pio);
+	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 static u8 cmd64x_ratemask (ide_drive_t *drive)
@@ -387,22 +381,6 @@ static u8 cmd64x_ratemask (ide_drive_t *drive)
 	return mode;
 }
 
-static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
-{
-	u8 speed	= 0x00;
-	u8 set_pio	= ide_get_best_pio_mode(drive, 4, 5, NULL);
-
-	cmd64x_tuneproc(drive, set_pio);
-	speed = XFER_PIO_0 + set_pio;
-	if (set_speed)
-		(void) ide_config_drive_speed(drive, speed);
-}
-
-static void config_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
-{
-	config_cmd64x_chipset_for_pio(drive, set_speed);
-}
-
 static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
@@ -414,7 +392,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 
 	u8 speed	= ide_rate_filter(cmd64x_ratemask(drive), xferspeed);
 
-	if (speed > XFER_PIO_4) {
+	if (speed >= XFER_SW_DMA_0) {
 		(void) pci_read_config_byte(dev, pciD, &regD);
 		(void) pci_read_config_byte(dev, pciU, &regU);
 		regD &= ~(unit ? 0x40 : 0x20);
@@ -438,17 +416,20 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		case XFER_SW_DMA_2:	regD |= (unit ? 0x40 : 0x10); break;
 		case XFER_SW_DMA_1:	regD |= (unit ? 0x80 : 0x20); break;
 		case XFER_SW_DMA_0:	regD |= (unit ? 0xC0 : 0x30); break;
-		case XFER_PIO_4:	cmd64x_tuneproc(drive, 4); break;
-		case XFER_PIO_3:	cmd64x_tuneproc(drive, 3); break;
-		case XFER_PIO_2:	cmd64x_tuneproc(drive, 2); break;
-		case XFER_PIO_1:	cmd64x_tuneproc(drive, 1); break;
-		case XFER_PIO_0:	cmd64x_tuneproc(drive, 0); break;
+		case XFER_PIO_5:
+		case XFER_PIO_4:
+		case XFER_PIO_3:
+		case XFER_PIO_2:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+			(void) cmd64x_tune_pio(drive, speed - XFER_PIO_0);
+			break;
 
 		default:
 			return 1;
 	}
 
-	if (speed > XFER_PIO_4) {
+	if (speed >= XFER_SW_DMA_0) {
 		(void) pci_write_config_byte(dev, pciU, regU);
 		regD |= (unit ? 0x40 : 0x20);
 		(void) pci_write_config_byte(dev, pciD, regD);
@@ -461,8 +442,6 @@ static int config_chipset_for_dma (ide_drive_t *drive)
 {
 	u8 speed	= ide_dma_speed(drive, cmd64x_ratemask(drive));
 
-	config_chipset_for_pio(drive, !speed);
-
 	if (!speed)
 		return 0;
 
@@ -478,7 +457,7 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
 		return 0;
 
 	if (ide_use_fast_pio(drive))
-		config_chipset_for_pio(drive, 1);
+		cmd64x_tune_drive(drive, 255);
 
 	return -1;
 }
@@ -679,14 +658,13 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xff;
 
-	hwif->tuneproc  = &cmd64x_tuneproc;
+	hwif->tuneproc  = &cmd64x_tune_drive;
 	hwif->speedproc = &cmd64x_tune_chipset;
 
-	if (!hwif->dma_base) {
-		hwif->drives[0].autotune = 1;
-		hwif->drives[1].autotune = 1;
+	hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+	if (!hwif->dma_base)
 		return;
-	}
 
 	hwif->atapi_dma = 1;
 
-- 
cgit v1.2.3


From fab59375b9543f84d1714f7dd00f5d11e531bd3e Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Sat, 3 Mar 2007 17:48:53 +0100
Subject: ide: fix drive side 80c cable check, take 2

eighty_ninty_three() had word 93 validitity check but not the 80c bit
test itself (bit 13).  This increases the chance of incorrect wire
detection especially because host side cable detection is often
unreliable and we sometimes soley depend on drive side cable
detection.  Fix it.

[ bart: fix off-by-1 bit name in the patch description ]

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-iops.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c67b3b1e6f4c..bd513f5a2323 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -583,6 +583,8 @@ u8 eighty_ninty_three (ide_drive_t *drive)
 	if(!(drive->id->hw_config & 0x4000))
 		return 0;
 #endif /* CONFIG_IDEDMA_IVB */
+	if (!(drive->id->hw_config & 0x2000))
+		return 0;
 	return 1;
 }
 
-- 
cgit v1.2.3


From 07af427606667c304a2e965cd51d2c03642e8cae Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 3 Mar 2007 17:48:53 +0100
Subject: piix/slc90e66: more tuneproc() fixing (take 2)

The tuneproc() method in both these drivers failed to set the drive's own speed.
Fix this by renaming the function and "wrapping around it" the new tuneproc()
method.  Switch back to calling tuneproc() in the PIO fallback code.
While at it, also convert the rest of the PIO timing code into proper C. :-)

Has been kind of tested on SLC90E66.  I'm too lazy to reboot my box and test
on ICH4... :-)

[ bart: I quickly tested it on ICH4. ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/piix.c     | 49 ++++++++++++++++++++++++++++------------------
 drivers/ide/pci/slc90e66.c | 38 ++++++++++++++++++-----------------
 2 files changed, 50 insertions(+), 37 deletions(-)

diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 569822f4cf55..061d300ab8be 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,10 +1,10 @@
 /*
- *  linux/drivers/ide/pci/piix.c	Version 0.46	December 3, 2006
+ *  linux/drivers/ide/pci/piix.c	Version 0.47	February 8, 2007
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
- *  Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
+ *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
@@ -205,14 +205,13 @@ static u8 piix_dma_2_pio (u8 xfer_rate) {
 }
 
 /**
- *	piix_tune_drive		-	tune a drive attached to a PIIX
+ *	piix_tune_pio		-	tune PIIX for PIO mode
  *	@drive: drive to tune
  *	@pio: desired PIO mode
  *
- *	Set the interface PIO mode based upon  the settings done by AMI BIOS
- *	(might be useful if drive is not registered in CMOS for any reason).
+ *	Set the interface PIO mode based upon the settings done by AMI BIOS.
  */
-static void piix_tune_drive (ide_drive_t *drive, u8 pio)
+static void piix_tune_pio (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
@@ -233,8 +232,6 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
-
 	/*
 	 * Master vs slave is synchronized above us but the slave register is
 	 * shared by the two hwifs so the corner case of two slave timeouts in
@@ -253,19 +250,20 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 		master_data |=  0x4000;
 		master_data &= ~0x0070;
 		if (pio > 1) {
-			/* enable PPE, IE and TIME */
-			master_data = master_data | (control << 4);
+			/* Set PPE, IE and TIME */
+			master_data |= control << 4;
 		}
 		pci_read_config_byte(dev, slave_port, &slave_data);
-		slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
-		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
+		slave_data &= hwif->channel ? 0x0f : 0xf0;
+		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
+			       (hwif->channel ? 4 : 0);
 	} else {
 		master_data &= ~0x3307;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
-			master_data = master_data | control;
+			master_data |= control;
 		}
-		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+		master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
 	}
 	pci_write_config_word(dev, master_port, master_data);
 	if (is_slave)
@@ -273,6 +271,21 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
 	spin_unlock_irqrestore(&tune_lock, flags);
 }
 
+/**
+ *	piix_tune_drive		-	tune a drive attached to PIIX
+ *	@drive: drive to tune
+ *	@pio: desired PIO mode
+ *
+ *	Set the drive's PIO mode (might be useful if drive is not registered
+ *	in CMOS for any reason).
+ */
+static void piix_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	piix_tune_pio(drive, pio);
+	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 /**
  *	piix_tune_chipset	-	tune a PIIX interface
  *	@drive: IDE drive to tune
@@ -348,8 +361,8 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 	}
 
-	piix_tune_drive(drive, piix_dma_2_pio(speed));
-	return (ide_config_drive_speed(drive, speed));
+	piix_tune_pio(drive, piix_dma_2_pio(speed));
+	return ide_config_drive_speed(drive, speed);
 }
 
 /**
@@ -392,9 +405,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive)
 		return 0;
 
 	if (ide_use_fast_pio(drive))
-		/* Find best PIO mode. */
-		piix_tune_chipset(drive, XFER_PIO_0 +
-				  ide_get_best_pio_mode(drive, 255, 4, NULL));
+		piix_tune_drive(drive, 255);
 
 	return -1;
 }
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index ae7eb58d961c..852ccb36da1d 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,8 +1,8 @@
 /*
- *  linux/drivers/ide/pci/slc90e66.c	Version 0.13	December 30, 2006
+ *  linux/drivers/ide/pci/slc90e66.c	Version 0.14	February 8, 2007
  *
  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
+ *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
  *
  * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
  * but this keeps the ISA-Bridge and slots alive.
@@ -57,11 +57,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
 	}
 }
 
-/*
- *  Based on settings done by AMI BIOS
- *  (might be useful if drive is not registered in CMOS for any reason).
- */
-static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
@@ -80,7 +76,6 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
 	spin_lock_irqsave(&ide_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
 
@@ -94,19 +89,20 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 		master_data |=  0x4000;
 		master_data &= ~0x0070;
 		if (pio > 1) {
-			/* enable PPE, IE and TIME */
-			master_data = master_data | (control << 4);
+			/* Set PPE, IE and TIME */
+			master_data |= control << 4;
 		}
 		pci_read_config_byte(dev, slave_port, &slave_data);
-		slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
-		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
+		slave_data &= hwif->channel ? 0x0f : 0xf0;
+		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
+			       (hwif->channel ? 4 : 0);
 	} else {
 		master_data &= ~0x3307;
 		if (pio > 1) {
 			/* enable PPE, IE and TIME */
-			master_data = master_data | control;
+			master_data |= control;
 		}
-		master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+		master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
 	}
 	pci_write_config_word(dev, master_port, master_data);
 	if (is_slave)
@@ -114,6 +110,13 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
 
+static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	slc90e66_tune_pio(drive, pio);
+	(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
@@ -162,8 +165,8 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 	}
 
-	slc90e66_tune_drive(drive, slc90e66_dma_2_pio(speed));
-	return (ide_config_drive_speed(drive, speed));
+	slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+	return ide_config_drive_speed(drive, speed);
 }
 
 static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
@@ -185,8 +188,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
 		return 0;
 
 	if (ide_use_fast_pio(drive))
-		(void)slc90e66_tune_chipset(drive, XFER_PIO_0 +
-				ide_get_best_pio_mode(drive, 255, 4, NULL));
+		slc90e66_tune_drive(drive, 255);
 
 	return -1;
 }
-- 
cgit v1.2.3


From 81d368e0e2591497106b2543918c79dd6d78277b Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 3 Mar 2007 17:48:53 +0100
Subject: ide: ide_get_best_pio_mode() returns incorrect IORDY setting (take 2)

The function ide_get_best_pio_mode() fails to return the correct IORDY setting
for the explicitly specified modes -- fix this along with the heading comment,
and also remove the long commented out code.

Also, while at it, correct the misliading comment about the PIO cycle time in
<linux/ide.h> -- it actually consists of only the active and recovery periods,
with only some chips also including the address setup time into equation...

[ bart: sl82c105 seems to be currently the only driver affected by this fix ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-lib.c | 18 ++++++------------
 include/linux/ide.h   |  3 ++-
 2 files changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 8afce4ceea31..68719314df3f 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -345,16 +345,16 @@ static int ide_scan_pio_blacklist (char *model)
 
 /**
  *	ide_get_best_pio_mode	-	get PIO mode from drive
- *	@driver: drive to consider
+ *	@drive: drive to consider
  *	@mode_wanted: preferred mode
- *	@max_mode: highest allowed
- *	@d: pio data
+ *	@max_mode: highest allowed mode
+ *	@d: PIO data
  *
  *	This routine returns the recommended PIO settings for a given drive,
  *	based on the drive->id information and the ide_pio_blacklist[].
- *	This is used by most chipset support modules when "auto-tuning".
  *
- *	Drive PIO mode auto selection
+ *	Drive PIO mode is auto-selected if 255 is passed as mode_wanted.
+ *	This is used by most chipset support modules when "auto-tuning".
  */
 
 u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
@@ -367,6 +367,7 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
 
 	if (mode_wanted != 255) {
 		pio_mode = mode_wanted;
+		use_iordy = (pio_mode > 2);
 	} else if (!drive->id) {
 		pio_mode = 0;
 	} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
@@ -396,19 +397,12 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
 			}
 		}
 
-#if 0
-		if (drive->id->major_rev_num & 0x0004) printk("ATA-2 ");
-#endif
-
 		/*
 		 * Conservative "downgrade" for all pre-ATA2 drives
 		 */
 		if (pio_mode && pio_mode < 4) {
 			pio_mode--;
 			overridden = 1;
-#if 0
-			use_iordy = (pio_mode > 2);
-#endif
 			if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
 				cycle_time = 0; /* use standard timing */
 		}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 79c028251c70..34f2676b3c62 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1359,7 +1359,8 @@ u8 ide_dump_status(ide_drive_t *, const char *, u8);
 typedef struct ide_pio_timings_s {
 	int	setup_time;	/* Address setup (ns) minimum */
 	int	active_time;	/* Active pulse (ns) minimum */
-	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
+	int	cycle_time;	/* Cycle time (ns) minimum = */
+				/* active + recovery (+ setup for some chips) */
 } ide_pio_timings_t;
 
 typedef struct ide_pio_data_s {
-- 
cgit v1.2.3


From ed89616786d47093525a5dc039b1f502f5ada954 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Sat, 3 Mar 2007 17:48:54 +0100
Subject: ide-cs: Update device table

Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment.

Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/legacy/ide-cs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index a5023cdbdc58..b08c37c9f956 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -359,14 +359,17 @@ void ide_release(struct pcmcia_device *link)
 static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_FUNC_ID(4),
 	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
+	PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),	/* I-O Data CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
-	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
+	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
  	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
 	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
-	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar */
+	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),	/* Viking CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar, Viking CFA */
 	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
 	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
-- 
cgit v1.2.3


From 9e5755bce00bb563739aeb0f09932a1907521167 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@osdl.org>
Date: Sat, 3 Mar 2007 17:48:54 +0100
Subject: ide: fix pmac breakage

Fix breakage added in the IDE devel tree.

Add header, then fix

drivers/ide/ppc/pmac.c: In function `pmac_ide_setup_dma':
drivers/ide/ppc/pmac.c:2044: warning: assignment from incompatible pointer type
drivers/ide/ppc/pmac.c: In function `pmac_ide_dma_host_on':
drivers/ide/ppc/pmac.c:1989: warning: control reaches end of non-void function
include/linux/pci.h: In function `pmac_ide_init':
drivers/ide/ppc/pmac.c:1563: warning: ignoring return value of `pci_register_driver', declared with attribute warn_unused_result

Then add some apparently-long-missing error handling.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide.c      |  4 ++--
 drivers/ide/ppc/pmac.c | 33 ++++++++++++++++++++++++---------
 2 files changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index b3c0818c5c6c..25487691c9f1 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1840,8 +1840,8 @@ static void __init probe_for_hwifs (void)
 #endif /* CONFIG_BLK_DEV_CMD640 */
 #ifdef CONFIG_BLK_DEV_IDE_PMAC
 	{
-		extern void pmac_ide_probe(void);
-		pmac_ide_probe();
+		extern int pmac_ide_probe(void);
+		(void)pmac_ide_probe();
 	}
 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
 #ifdef CONFIG_BLK_DEV_GAYLE
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 395d35253d5d..071a030ec26e 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -48,7 +48,7 @@
 #include <asm/mediabay.h>
 #endif
 
-#include "ide-timing.h"
+#include "../ide-timing.h"
 
 #undef IDE_PMAC_DEBUG
 
@@ -1551,19 +1551,34 @@ static struct pci_driver pmac_ide_pci_driver = {
 };
 MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match);
 
-void __init
-pmac_ide_probe(void)
+int __init pmac_ide_probe(void)
 {
+	int error;
+
 	if (!machine_is(powermac))
-		return;
+		return -ENODEV;
 
 #ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
-	pci_register_driver(&pmac_ide_pci_driver);
-	macio_register_driver(&pmac_ide_macio_driver);
+	error = pci_register_driver(&pmac_ide_pci_driver);
+	if (error)
+		goto out;
+	error = macio_register_driver(&pmac_ide_macio_driver);
+	if (error) {
+		pci_unregister_driver(&pmac_ide_pci_driver);
+		goto out;
+	}
 #else
-	macio_register_driver(&pmac_ide_macio_driver);
-	pci_register_driver(&pmac_ide_pci_driver);
+	error = macio_register_driver(&pmac_ide_macio_driver);
+	if (error)
+		goto out;
+	error = pci_register_driver(&pmac_ide_pci_driver);
+	if (error) {
+		macio_unregister_driver(&pmac_ide_macio_driver);
+		goto out;
+	}
 #endif
+out:
+	return error;
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
@@ -1983,7 +1998,7 @@ static void pmac_ide_dma_host_off(ide_drive_t *drive)
 {
 }
 
-static int pmac_ide_dma_host_on(ide_drive_t *drive)
+static void pmac_ide_dma_host_on(ide_drive_t *drive)
 {
 }
 
-- 
cgit v1.2.3


From ed8ccee0918ad063a4741c0656fda783e02df627 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Sat, 3 Mar 2007 17:48:54 +0100
Subject: adjust legacy IDE resource setting (v2)

The change to force legacy mode IDE channels' resources to fixed non-zero
values confuses (at least some versions of) X, because the values reported
by the kernel and those readable from PCI config space aren't consistent
anymore.  Therefore, this patch arranges for the respective BARs to also
get updated if possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/pci/probe.c | 45 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 2fe1d690eb13..a4a96826d9e0 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -682,7 +682,34 @@ static void pci_read_irq(struct pci_dev *dev)
 	dev->irq = irq;
 }
 
-#define LEGACY_IO_RESOURCE	(IORESOURCE_IO | IORESOURCE_PCI_FIXED)
+static void change_legacy_io_resource(struct pci_dev * dev, unsigned index,
+                                      unsigned start, unsigned end)
+{
+	unsigned base = start & PCI_BASE_ADDRESS_IO_MASK;
+	unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1;
+
+	/*
+	 * Some X versions get confused when the BARs reported through
+	 * /sys or /proc differ from those seen in config space, thus
+	 * try to update the config space values, too.
+	 */
+	if (!(pci_resource_flags(dev, index) & IORESOURCE_IO))
+		printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n",
+		       pci_name(dev), index);
+	else if (pci_resource_len(dev, index) != len)
+		printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n",
+		       pci_name(dev), index, (unsigned)pci_resource_len(dev, index));
+	else {
+		printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n",
+		       pci_name(dev), index,
+		       (unsigned)pci_resource_start(dev, index), base);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base);
+	}
+	pci_resource_start(dev, index) = start;
+	pci_resource_end(dev, index)   = end;
+	pci_resource_flags(dev, index) =
+		IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO;
+}
 
 /**
  * pci_setup_device - fill in class and map information of a device
@@ -735,20 +762,12 @@ static int pci_setup_device(struct pci_dev * dev)
 			u8 progif;
 			pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
 			if ((progif & 1) == 0) {
-				dev->resource[0].start = 0x1F0;
-				dev->resource[0].end = 0x1F7;
-				dev->resource[0].flags = LEGACY_IO_RESOURCE;
-				dev->resource[1].start = 0x3F6;
-				dev->resource[1].end = 0x3F6;
-				dev->resource[1].flags = LEGACY_IO_RESOURCE;
+				change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7);
+				change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6);
 			}
 			if ((progif & 4) == 0) {
-				dev->resource[2].start = 0x170;
-				dev->resource[2].end = 0x177;
-				dev->resource[2].flags = LEGACY_IO_RESOURCE;
-				dev->resource[3].start = 0x376;
-				dev->resource[3].end = 0x376;
-				dev->resource[3].flags = LEGACY_IO_RESOURCE;
+				change_legacy_io_resource(dev, 2, 0x170, 0x177);
+				change_legacy_io_resource(dev, 3, 0x376, 0x376);
 			}
 		}
 		break;
-- 
cgit v1.2.3


From 8693d3e47b5cd95e1a513f90bc5e0467ce885e24 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Sat, 3 Mar 2007 17:48:54 +0100
Subject: siimage: DRAC4 note

Revised DRAC4 warning as Jeff suggested, this one includes more info
about why the problem occurs

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/siimage.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 7b4c189a9d99..71eccdf5f817 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -26,6 +26,11 @@
  *	If you have strange problems with nVidia chipset systems please
  *	see the SI support documentation and update your system BIOS
  *	if neccessary
+ *
+ *  The Dell DRAC4 has some interesting features including effectively hot
+ *  unplugging/replugging the virtual CD interface when the DRAC is reset.
+ *  This often causes drivers/ide/siimage to panic but is ok with the rather
+ *  smarter code in libata.
  */
 
 #include <linux/types.h>
-- 
cgit v1.2.3


From 846c11abc7934a523a665a3b702358e6f2998e3e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Sat, 3 Mar 2007 17:48:54 +0100
Subject: ide: remove a ton of pointless #undef REALLY_SLOW_IO

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/cris/ide-cris.c   | 2 --
 drivers/ide/ide-disk.c        | 2 --
 drivers/ide/ide-probe.c       | 2 --
 drivers/ide/ide.c             | 2 --
 drivers/ide/legacy/ali14xx.c  | 2 --
 drivers/ide/legacy/dtc2278.c  | 2 --
 drivers/ide/legacy/ht6560b.c  | 2 --
 drivers/ide/legacy/qd65xx.c   | 2 --
 drivers/ide/mips/au1xxx-ide.c | 2 --
 drivers/ide/pci/cmd640.c      | 1 -
 drivers/ide/pci/generic.c     | 2 --
 drivers/ide/pci/opti621.c     | 1 -
 drivers/ide/pci/rz1000.c      | 2 --
 13 files changed, 24 deletions(-)

diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 6b2d152351b3..556455fbfa2b 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -17,8 +17,6 @@
  * device can't do DMA handshaking for some stupid reason. We don't need to do that.
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/timer.h>
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index e2cea1889c4d..37aa6ddd9702 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -43,8 +43,6 @@
 
 #define IDEDISK_VERSION	"1.18"
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 //#define DEBUG
 
 #include <linux/module.h>
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 8afbd6cb94be..8f15c23aa70d 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -31,8 +31,6 @@
  *			valid after probe time even with noprobe
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/string.h>
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 25487691c9f1..48a087dfc592 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -126,8 +126,6 @@
 #define	REVISION	"Revision: 7.00alpha2"
 #define	VERSION		"Id: ide.c 7.00a2 20020906"
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #define _IDE_C			/* Tell ide.h it's really us */
 
 #include <linux/module.h>
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 9c544467cb74..f9f5b8d54d6d 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -37,8 +37,6 @@
  * mode 4 for a while now with no trouble.)  -Derek
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 3b1d33baaa2f..f2903b6e43c0 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -4,8 +4,6 @@
  *  Copyright (C) 1996  Linus Torvalds & author (see below)
  */
 
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 19ccd006f205..02d5e20791e3 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -36,8 +36,6 @@
 
 #define HT6560B_VERSION "v0.07"
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index d3c3bc2640e7..584e26c96b46 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -25,8 +25,6 @@
  * Samuel Thibault <samuel.thibault@fnac.net>
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 0a59d5ef1599..b2dc028dc8ca 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -29,8 +29,6 @@
  * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
  *       Interface and Linux Device Driver" Application Note.
  */
-#undef REALLY_SLOW_IO           /* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 61b5f9c0b2f4..dc43f009acab 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -98,7 +98,6 @@
  *			 (patch courtesy of Zoltan Hidvegi)
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
 #define CMD640_PREFETCH_MASKS 1
 
 //#define CMD640_DUMP_REGS
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index b408c6c517ea..f2c5a141ca10 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -21,8 +21,6 @@
  * are deemed to be part of the source code.
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 9ca60dd2185e..af9aaafa55b6 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -87,7 +87,6 @@
  * 0.5 doesn't work.
  */
 
-#undef REALLY_SLOW_IO	/* most systems can safely undef this */
 #define OPTI621_DEBUG		/* define for debug messages */
 
 #include <linux/types.h>
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index c1855311052b..f8c954690142 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -15,8 +15,6 @@
  *  Dunno if this fixes both ports, or only the primary port (?).
  */
 
-#undef REALLY_SLOW_IO		/* most systems can safely undef this */
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-- 
cgit v1.2.3


From 06a9952b8379c48df972023f648014a82582c23a Mon Sep 17 00:00:00 2001
From: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Date: Sat, 3 Mar 2007 17:48:55 +0100
Subject: scc_pata: bugfix for checking DMA IRQ status

On Tuesday 27 February 2007, Akira Iguchi wrote:
>
> But since I sent the first patch, I found a bug for checking DMA IRQ status.
> (http://www.spinics.net/lists/linux-ide/msg06903.html)
> Then I sent the fixed patch for libata only. So my drivers/ide patch
> still has same bug and I want to fix it, too.
>
> The following patch fixes this bug. Please apply this patch.

From: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ppc/scc_pata.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/ide/ppc/scc_pata.c b/drivers/ide/ppc/scc_pata.c
index de64b022478b..f84bf791f72e 100644
--- a/drivers/ide/ppc/scc_pata.c
+++ b/drivers/ide/ppc/scc_pata.c
@@ -509,6 +509,32 @@ static int scc_ide_dma_end(ide_drive_t * drive)
 	return __ide_dma_end(drive);
 }
 
+/* returns 1 if dma irq issued, 0 otherwise */
+static int scc_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	u8 dma_stat		= hwif->INB(hwif->dma_status);
+
+	/* return 1 if INTR asserted */
+	if ((dma_stat & 4) == 4)
+		return 1;
+
+	/* Workaround for PTERADD: emulate DMA_INTR when
+	 * - IDE_STATUS[ERR] = 1
+	 * - INT_STATUS[INTRQ] = 1
+	 * - DMA_STATUS[IORACTA] = 1
+	 */
+	if (in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT &&
+	    in_be32((void __iomem *)(hwif->dma_base + 0x014)) & INTSTS_INTRQ &&
+		dma_stat & 1)
+		return 1;
+
+	if (!drive->waiting_for_dma)
+		printk(KERN_WARNING "%s: (%s) called while not waiting\n",
+			drive->name, __FUNCTION__);
+	return 0;
+}
+
 /**
  *	setup_mmio_scc	-	map CTRL/BMID region
  *	@dev: PCI device we are configuring
@@ -712,6 +738,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 	hwif->speedproc = scc_tune_chipset;
 	hwif->tuneproc = scc_tuneproc;
 	hwif->ide_dma_check = scc_config_drive_for_dma;
+	hwif->ide_dma_test_irq = scc_dma_test_irq;
 
 	hwif->drives[0].autotune = IDE_TUNE_AUTO;
 	hwif->drives[1].autotune = IDE_TUNE_AUTO;
-- 
cgit v1.2.3


From e76ecf86da99383f59f4c85f594403c5c3c1fe91 Mon Sep 17 00:00:00 2001
From: Richard Knutsson <ricknu-0@student.ltu.se>
Date: Sat, 3 Mar 2007 17:48:55 +0100
Subject: ide/pci/delkin_cb.c: pci_module_init to pci_register_driver

Convert pci_module_init() to pci_register_driver().

[ Compile-tested with "allyes", "allmod" & "allno" on i386. ]

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/delkin_cb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index e2672fc65d30..d4b753e70119 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -122,7 +122,7 @@ static struct pci_driver driver = {
 static int
 delkin_cb_init (void)
 {
-	return pci_module_init(&driver);
+	return pci_register_driver(&driver);
 }
 
 static void
-- 
cgit v1.2.3


From b6209a90eca8c9a464bf9c5b91741fb125185619 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Sat, 3 Mar 2007 17:48:55 +0100
Subject: ide: remove some obsoleted kernel params (v2)

Remove

* "hdx=serialize"
* "idex=noautotune"
* "idex=autotune"

kernel params, they have been obsoleted for ages.

"idex=serialize", "hdx=noautotune" and "hdx=autotune" are still available
so there is no funcionality loss caused by this patch.

v2:

* fix CONFIG_BLK_DEV_4DRIVES=y build broken by version 1 of the patch
  [ /me wearing brown paper bag ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 Documentation/ide.txt       | 15 +++------------
 drivers/ide/ide.c           | 23 ++++++++---------------
 drivers/ide/legacy/qd65xx.c |  4 ++--
 drivers/ide/pci/opti621.c   |  2 +-
 4 files changed, 14 insertions(+), 30 deletions(-)

diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 786c3a766995..82349f5cd3d7 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -232,7 +232,9 @@ Summary of ide driver parameters for kernel command line
 
  "hdx=remap63"		: remap the drive: add 63 to all sector numbers
 			  (for DM OnTrack)
- 
+
+ "idex=noautotune"	: driver will NOT attempt to tune interface speed
+
  "hdx=autotune"		: driver will attempt to tune interface speed
 			  to the fastest PIO mode supported,
 			  if possible for this drive only.
@@ -267,17 +269,6 @@ Summary of ide driver parameters for kernel command line
  "idex=base,ctl"	: specify both base and ctl
 
  "idex=base,ctl,irq"	: specify base, ctl, and irq number
- 
- "idex=autotune"	: driver will attempt to tune interface speed
-			  to the fastest PIO mode supported,
-			  for all drives on this interface.
-			  Not fully supported by all chipset types,
-			  and quite likely to cause trouble with
-			  older/odd IDE drives.
-
- "idex=noautotune"	: driver will NOT attempt to tune interface speed 
-			  This is the default for most chipsets,
-			  except the cmd640.
 
  "idex=serialize"	: do not overlap operations on idex. Please note
 			  that you will have to specify this option for
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 48a087dfc592..ac1a720f182a 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1578,7 +1578,7 @@ static int __init ide_setup(char *s)
 	 */
 	if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
 		const char *hd_words[] = {
-			"none", "noprobe", "nowerr", "cdrom", "serialize",
+			"none", "noprobe", "nowerr", "cdrom", "minus5",
 			"autotune", "noautotune", "minus8", "swapdata", "bswap",
 			"noflush", "remap", "remap63", "scsi", NULL };
 		unit = s[2] - 'a';
@@ -1606,9 +1606,6 @@ static int __init ide_setup(char *s)
 				drive->ready_stat = 0;
 				hwif->noprobe = 0;
 				goto done;
-			case -5: /* "serialize" */
-				printk(" -- USE \"ide%d=serialize\" INSTEAD", hw);
-				goto do_serialize;
 			case -6: /* "autotune" */
 				drive->autotune = IDE_TUNE_AUTO;
 				goto obsolete_option;
@@ -1669,7 +1666,7 @@ static int __init ide_setup(char *s)
 		 * (-8, -9, -10) are reserved to ease the hardcoding.
 		 */
 		static const char *ide_words[] = {
-			"noprobe", "serialize", "autotune", "noautotune", 
+			"noprobe", "serialize", "minus3", "minus4",
 			"reset", "dma", "ata66", "minus8", "minus9",
 			"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
 			"dtc2278", "umc8672", "ali14xx", NULL };
@@ -1740,12 +1737,17 @@ static int __init ide_setup(char *s)
 				hwif->chipset = mate->chipset = ide_4drives;
 				mate->irq = hwif->irq;
 				memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
-				goto do_serialize;
+				hwif->mate = mate;
+				mate->mate = hwif;
+				hwif->serialized = mate->serialized = 1;
+				goto obsolete_option;
 			}
 #endif /* CONFIG_BLK_DEV_4DRIVES */
 			case -10: /* minus10 */
 			case -9: /* minus9 */
 			case -8: /* minus8 */
+			case -4:
+			case -3:
 				goto bad_option;
 			case -7: /* ata66 */
 #ifdef CONFIG_BLK_DEV_IDEPCI
@@ -1760,16 +1762,7 @@ static int __init ide_setup(char *s)
 			case -5: /* "reset" */
 				hwif->reset = 1;
 				goto obsolete_option;
-			case -4: /* "noautotune" */
-				hwif->drives[0].autotune = IDE_TUNE_NOAUTO;
-				hwif->drives[1].autotune = IDE_TUNE_NOAUTO;
-				goto obsolete_option;
-			case -3: /* "autotune" */
-				hwif->drives[0].autotune = IDE_TUNE_AUTO;
-				hwif->drives[1].autotune = IDE_TUNE_AUTO;
-				goto obsolete_option;
 			case -2: /* "serialize" */
-			do_serialize:
 				hwif->mate = &ide_hwifs[hw^1];
 				hwif->mate->mate = hwif;
 				hwif->serialized = hwif->mate->serialized = 1;
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 584e26c96b46..ab482c85e415 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -16,8 +16,8 @@
  * Please set local bus speed using kernel parameter idebus
  * 	for example, "idebus=33" stands for 33Mhz VLbus
  * To activate controller support, use "ide0=qd65xx"
- * To enable tuning, use "ide0=autotune"
- * To enable second channel tuning (qd6580 only), use "ide1=autotune"
+ * To enable tuning, use "hda=autotune hdb=autotune"
+ * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"
  */
 
 /*
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index af9aaafa55b6..aede7eee9246 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -57,7 +57,7 @@
  * There is a 25/33MHz switch in configuration
  * register, but driver is written for use at any frequency which get
  * (use idebus=xx to select PCI bus speed).
- * Use ide0=autotune for automatical tune of the PIO modes.
+ * Use hda=autotune and hdb=autotune for automatical tune of the PIO modes.
  * If you get strange results, do not use this and set PIO manually
  * by hdparm.
  *
-- 
cgit v1.2.3


From 849138827c962589ac50496fa7feeb2a2d51b467 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Sat, 3 Mar 2007 17:48:55 +0100
Subject: ide: make legacy IDE VLB modules check for the "probe" kernel params
 (v2)

Legacy IDE VLB host drivers didn't check for "probe" options when compiled
as modules, which was obviously wrong as we don't want module to poke at
random I/O ports by simply loading it.  Fix it by adding "probe" module param
to legacy IDE VLB host drivers.

v2:
* don't obsolete old "ide0=dtc2278/ht6560b/qd65xx/ali14xx/umc8672"
  IDE driver options yet (per Alan Cox's request) and enhance documentation

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 Documentation/ide.txt        | 14 +++++++++-----
 drivers/ide/Kconfig          | 10 +++++-----
 drivers/ide/ide.c            | 10 +++++-----
 drivers/ide/legacy/ali14xx.c |  9 +++++++++
 drivers/ide/legacy/dtc2278.c | 12 ++++++++++--
 drivers/ide/legacy/ht6560b.c |  8 ++++++++
 drivers/ide/legacy/qd65xx.c  |  8 ++++++++
 drivers/ide/legacy/umc8672.c | 15 ++++++++++++---
 8 files changed, 66 insertions(+), 20 deletions(-)

diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 82349f5cd3d7..3bb9f9c98611 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -294,13 +294,8 @@ The following are valid ONLY on ide0, which usually corresponds
 to the first ATA interface found on the particular host, and the defaults for
 the base,ctl ports must not be altered.
 
- "ide0=dtc2278"		: probe/support DTC2278 interface
- "ide0=ht6560b"		: probe/support HT6560B interface
  "ide0=cmd640_vlb"	: *REQUIRED* for VLB cards with the CMD640 chip
 			  (not for PCI -- automatically detected)
- "ide0=qd65xx"		: probe/support qd65xx interface
- "ide0=ali14xx"		: probe/support ali14xx chipsets (ALI M1439/M1443/M1445)
- "ide0=umc8672"		: probe/support umc8672 chipsets
 
  "ide=doubler"		: probe/support IDE doublers on Amiga
 
@@ -308,6 +303,15 @@ There may be more options than shown -- use the source, Luke!
 
 Everything else is rejected with a "BAD OPTION" message.
 
+For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672)
+you need to explicitly enable probing by using "probe" kernel parameter,
+i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use:
+
+* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel
+
+* "probe" module parameter when ali14xx driver is compiled as module
+  ("modprobe ali14xx probe")
+
 ================================================================================
 
 IDE ATAPI streaming tape driver
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 49234e32fd16..5d134bb75ba1 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -1023,7 +1023,7 @@ config BLK_DEV_4DRIVES
 config BLK_DEV_ALI14XX
 	tristate "ALI M14xx support"
 	help
-	  This driver is enabled at runtime using the "ide0=ali14xx" kernel
+	  This driver is enabled at runtime using the "ali14xx.probe" kernel
 	  boot parameter.  It enables support for the secondary IDE interface
 	  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
 	  I/O speeds to be set as well.  See the files
@@ -1033,7 +1033,7 @@ config BLK_DEV_ALI14XX
 config BLK_DEV_DTC2278
 	tristate "DTC-2278 support"
 	help
-	  This driver is enabled at runtime using the "ide0=dtc2278" kernel
+	  This driver is enabled at runtime using the "dtc2278.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the DTC-2278 card, and permits faster I/O speeds to be set as
 	  well. See the <file:Documentation/ide.txt> and
@@ -1042,7 +1042,7 @@ config BLK_DEV_DTC2278
 config BLK_DEV_HT6560B
 	tristate "Holtek HT6560B support"
 	help
-	  This driver is enabled at runtime using the "ide0=ht6560b" kernel
+	  This driver is enabled at runtime using the "ht6560b.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the Holtek card, and permits faster I/O speeds to be set as well.
 	  See the <file:Documentation/ide.txt> and
@@ -1051,7 +1051,7 @@ config BLK_DEV_HT6560B
 config BLK_DEV_QD65XX
 	tristate "QDI QD65xx support"
 	help
-	  This driver is enabled at runtime using the "ide0=qd65xx" kernel
+	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
 	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
 	  more info.
@@ -1059,7 +1059,7 @@ config BLK_DEV_QD65XX
 config BLK_DEV_UMC8672
 	tristate "UMC-8672 support"
 	help
-	  This driver is enabled at runtime using the "ide0=umc8672" kernel
+	  This driver is enabled at runtime using the "umc8672.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the UMC-8672, and permits faster I/O speeds to be set as well.
 	  See the files <file:Documentation/ide.txt> and
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index ac1a720f182a..dfbd74458522 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1484,23 +1484,23 @@ static int __init match_parm (char *s, const char *keywords[], int vals[], int m
 }
 
 #ifdef CONFIG_BLK_DEV_ALI14XX
-static int __initdata probe_ali14xx;
+extern int probe_ali14xx;
 extern int ali14xx_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_UMC8672
-static int __initdata probe_umc8672;
+extern int probe_umc8672;
 extern int umc8672_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_DTC2278
-static int __initdata probe_dtc2278;
+extern int probe_dtc2278;
 extern int dtc2278_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_HT6560B
-static int __initdata probe_ht6560b;
+extern int probe_ht6560b;
 extern int ht6560b_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_QD65XX
-static int __initdata probe_qd65xx;
+extern int probe_qd65xx;
 extern int qd65xx_init(void);
 #endif
 
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index f9f5b8d54d6d..91961aa03047 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -228,9 +228,17 @@ static int __init ali14xx_probe(void)
 	return 0;
 }
 
+int probe_ali14xx = 0;
+
+module_param_named(probe, probe_ali14xx, bool, 0);
+MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
+
 /* Can be called directly from ide.c. */
 int __init ali14xx_init(void)
 {
+	if (probe_ali14xx == 0)
+		goto out;
+
 	/* auto-detect IDE controller port */
 	if (findPort()) {
 		if (ali14xx_probe())
@@ -238,6 +246,7 @@ int __init ali14xx_init(void)
 		return 0;
 	}
 	printk(KERN_ERR "ali14xx: not found.\n");
+out:
 	return -ENODEV;
 }
 
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index f2903b6e43c0..0219ffa64db6 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -92,7 +92,7 @@ static void tune_dtc2278 (ide_drive_t *drive, u8 pio)
 	HWIF(drive)->drives[!drive->select.b.unit].io_32bit = 1;
 }
 
-static int __init probe_dtc2278(void)
+static int __init dtc2278_probe(void)
 {
 	unsigned long flags;
 	ide_hwif_t *hwif, *mate;
@@ -143,10 +143,18 @@ static int __init probe_dtc2278(void)
 	return 0;
 }
 
+int probe_dtc2278 = 0;
+
+module_param_named(probe, probe_dtc2278, bool, 0);
+MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
+
 /* Can be called directly from ide.c. */
 int __init dtc2278_init(void)
 {
-	if (probe_dtc2278()) {
+	if (probe_dtc2278 == 0)
+		return -ENODEV;
+
+	if (dtc2278_probe()) {
 		printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
 		return -EBUSY;
 	}
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 02d5e20791e3..a2832643c522 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -301,12 +301,20 @@ static void tune_ht6560b (ide_drive_t *drive, u8 pio)
 #endif
 }
 
+int probe_ht6560b = 0;
+
+module_param_named(probe, probe_ht6560b, bool, 0);
+MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
+
 /* Can be called directly from ide.c. */
 int __init ht6560b_init(void)
 {
 	ide_hwif_t *hwif, *mate;
 	int t;
 
+	if (probe_ht6560b == 0)
+		return -ENODEV;
+
 	hwif = &ide_hwifs[0];
 	mate = &ide_hwifs[1];
 
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index ab482c85e415..2fb8f50f1293 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -488,9 +488,17 @@ static int __init qd_probe(int base)
 	return 1;
 }
 
+int probe_qd65xx = 0;
+
+module_param_named(probe, probe_qd65xx, bool, 0);
+MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
+
 /* Can be called directly from ide.c. */
 int __init qd65xx_init(void)
 {
+	if (probe_qd65xx == 0)
+		return -ENODEV;
+
 	if (qd_probe(0x30))
 		qd_probe(0xb0);
 	if (ide_hwifs[0].chipset != ide_qd65xx &&
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index 6e2c58c5f6a2..ca7974455578 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -165,12 +165,21 @@ static int __init umc8672_probe(void)
 	return 0;
 }
 
+int probe_umc8672 = 0;
+
+module_param_named(probe, probe_umc8672, bool, 0);
+MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
+
 /* Can be called directly from ide.c. */
 int __init umc8672_init(void)
 {
-	if (umc8672_probe())
-		return -ENODEV;
-	return 0;
+	if (probe_umc8672 == 0)
+		goto out;
+
+	if (umc8672_probe() == 0)
+		return 0;;
+out:
+	return -ENODEV;;
 }
 
 #ifdef MODULE
-- 
cgit v1.2.3