From 03208cc69fc16a8d46de49f51f49964666e4a694 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 28 Jan 2015 09:00:49 -0800 Subject: clk: ti: Fix FAPLL parent enable bit handling Commit 163152cbbe32 ("clk: ti: Add support for FAPLL on dm816x") added basic support for the FAPLL on dm818x, but has a bug for the parent PLL enable bit. The FAPLL_MAIN_PLLEN is defined as BIT(3) but the code is doing a shift on it. This means the parent PLL won't get disabled even if all it's child synthesizers are disabled. Reported-by: Dan Carpenter Cc: Brian Hutchinson Signed-off-by: Tony Lindgren Signed-off-by: Michael Turquette --- drivers/clk/ti/fapll.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/ti/fapll.c b/drivers/clk/ti/fapll.c index 6ef89639a9f6..d21640634adf 100644 --- a/drivers/clk/ti/fapll.c +++ b/drivers/clk/ti/fapll.c @@ -84,7 +84,7 @@ static int ti_fapll_enable(struct clk_hw *hw) struct fapll_data *fd = to_fapll(hw); u32 v = readl_relaxed(fd->base); - v |= (1 << FAPLL_MAIN_PLLEN); + v |= FAPLL_MAIN_PLLEN; writel_relaxed(v, fd->base); return 0; @@ -95,7 +95,7 @@ static void ti_fapll_disable(struct clk_hw *hw) struct fapll_data *fd = to_fapll(hw); u32 v = readl_relaxed(fd->base); - v &= ~(1 << FAPLL_MAIN_PLLEN); + v &= ~FAPLL_MAIN_PLLEN; writel_relaxed(v, fd->base); } @@ -104,7 +104,7 @@ static int ti_fapll_is_enabled(struct clk_hw *hw) struct fapll_data *fd = to_fapll(hw); u32 v = readl_relaxed(fd->base); - return v & (1 << FAPLL_MAIN_PLLEN); + return v & FAPLL_MAIN_PLLEN; } static unsigned long ti_fapll_recalc_rate(struct clk_hw *hw, -- cgit v1.2.3 From 7dd47b8ef54c301ecde58cecf2f3e29ff3f48d4a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 29 Jan 2015 15:38:11 -0800 Subject: clk: qcom: Fix slimbus n and m val offsets These shifts were copy/pasted from the pcm which is a different size RCG. Use the correct offsets so that slimbus rates are correct. Fixes: b82875ee07e5 "clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver" Signed-off-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/qcom/lcc-msm8960.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/lcc-msm8960.c b/drivers/clk/qcom/lcc-msm8960.c index a75a408cfccd..705e4d5bb6c7 100644 --- a/drivers/clk/qcom/lcc-msm8960.c +++ b/drivers/clk/qcom/lcc-msm8960.c @@ -417,8 +417,8 @@ static struct clk_rcg slimbus_src = { .mnctr_en_bit = 8, .mnctr_reset_bit = 7, .mnctr_mode_shift = 5, - .n_val_shift = 16, - .m_val_shift = 16, + .n_val_shift = 24, + .m_val_shift = 8, .width = 8, }, .p = { -- cgit v1.2.3 From 84b919fdb8559a8cd5432d8fa0002219df59cb32 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 29 Jan 2015 15:38:12 -0800 Subject: clk: qcom: lcc-msm8960: Fix PLL rate detection regmap_read() returns 0 on success, not the value of the register that is read. Fix it so we properly detect the frequency plan. Fixes: b82875ee07e5 "clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver" Signed-off-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/qcom/lcc-msm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/lcc-msm8960.c b/drivers/clk/qcom/lcc-msm8960.c index 705e4d5bb6c7..3ecade0de9d2 100644 --- a/drivers/clk/qcom/lcc-msm8960.c +++ b/drivers/clk/qcom/lcc-msm8960.c @@ -547,7 +547,7 @@ static int lcc_msm8960_probe(struct platform_device *pdev) return PTR_ERR(regmap); /* Use the correct frequency plan depending on speed of PLL4 */ - val = regmap_read(regmap, 0x4, &val); + regmap_read(regmap, 0x4, &val); if (val == 0x12) { slimbus_src.freq_tbl = clk_tbl_aif_osr_492; mi2s_osr_src.freq_tbl = clk_tbl_aif_osr_492; -- cgit v1.2.3 From 4be8fc04700aafeb3c8a9c10ece5652e08ec0e94 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 29 Jan 2015 15:38:13 -0800 Subject: clk: qcom: Add PLL4 vote clock This clock is needed for most audio clock frequencies. Add it. Signed-off-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/qcom/gcc-msm8960.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index b0b562b9ce0e..e60feffc10a1 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -48,6 +48,17 @@ static struct clk_pll pll3 = { }, }; +static struct clk_regmap pll4_vote = { + .enable_reg = 0x34c0, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "pll4_vote", + .parent_names = (const char *[]){ "pll4" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + static struct clk_pll pll8 = { .l_reg = 0x3144, .m_reg = 0x3148, @@ -3023,6 +3034,7 @@ static struct clk_branch rpm_msg_ram_h_clk = { static struct clk_regmap *gcc_msm8960_clks[] = { [PLL3] = &pll3.clkr, + [PLL4_VOTE] = &pll4_vote, [PLL8] = &pll8.clkr, [PLL8_VOTE] = &pll8_vote, [PLL14] = &pll14.clkr, @@ -3247,6 +3259,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { static struct clk_regmap *gcc_apq8064_clks[] = { [PLL3] = &pll3.clkr, + [PLL4_VOTE] = &pll4_vote, [PLL8] = &pll8.clkr, [PLL8_VOTE] = &pll8_vote, [PLL14] = &pll14.clkr, -- cgit v1.2.3 From 3b34109a4d07e732dac6db1102a3399177333651 Mon Sep 17 00:00:00 2001 From: kbuild test robot Date: Wed, 28 Jan 2015 15:00:51 +0800 Subject: clk: qcom: fix platform_no_drv_owner.cocci warnings drivers/clk/qcom/lcc-ipq806x.c:465:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Rajendra Nayak Signed-off-by: Fengguang Wu Reviewed-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/qcom/lcc-ipq806x.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c index 121ffde25dc3..c9ff27b4648b 100644 --- a/drivers/clk/qcom/lcc-ipq806x.c +++ b/drivers/clk/qcom/lcc-ipq806x.c @@ -462,7 +462,6 @@ static struct platform_driver lcc_ipq806x_driver = { .remove = lcc_ipq806x_remove, .driver = { .name = "lcc-ipq806x", - .owner = THIS_MODULE, .of_match_table = lcc_ipq806x_match_table, }, }; -- cgit v1.2.3 From a456fe3d27b1fe502fe3d5fd21cd025e5bf64c22 Mon Sep 17 00:00:00 2001 From: kbuild test robot Date: Wed, 28 Jan 2015 15:11:34 +0800 Subject: clk: qcom: fix platform_no_drv_owner.cocci warnings drivers/clk/qcom/lcc-msm8960.c:577:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Fengguang Wu Reviewed-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/qcom/lcc-msm8960.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/clk/qcom/lcc-msm8960.c b/drivers/clk/qcom/lcc-msm8960.c index 3ecade0de9d2..e2c863295f00 100644 --- a/drivers/clk/qcom/lcc-msm8960.c +++ b/drivers/clk/qcom/lcc-msm8960.c @@ -574,7 +574,6 @@ static struct platform_driver lcc_msm8960_driver = { .remove = lcc_msm8960_remove, .driver = { .name = "lcc-msm8960", - .owner = THIS_MODULE, .of_match_table = lcc_msm8960_match_table, }, }; -- cgit v1.2.3 From 2f7bf4af5c8177f6a27d9b67efdeb48f5bdbf821 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 24 Feb 2015 11:39:25 +0100 Subject: clk: divider: return real rate instead of divider value Commit bca9690b9426 ("clk: divider: Make generic for usage elsewhere") returned only the divider value for read-only dividers instead of the actual rate. Fixes: bca9690b9426 ("clk: divider: Make generic for usage elsewhere") Signed-off-by: Heiko Stuebner Reviewed-by: James Hogan Tested-by: James Hogan Acked-by: Stephen Boyd Signed-off-by: Michael Turquette --- drivers/clk/clk-divider.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index db7f8bce7467..eff8a862eb08 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -353,7 +353,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, bestdiv = readl(divider->reg) >> divider->shift; bestdiv &= div_mask(divider->width); bestdiv = _get_div(divider->table, bestdiv, divider->flags); - return bestdiv; + return DIV_ROUND_UP(*prate, bestdiv); } return divider_round_rate(hw, rate, prate, divider->table, -- cgit v1.2.3 From da321133b53caf7889ed3ca1dabe4cc368db2604 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Sat, 21 Feb 2015 11:40:23 +0100 Subject: clk: divider: fix calculation of maximal parent rate for a given divider MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rate provided at the output of a clk-divider is calculated as: DIV_ROUND_UP(parent_rate, div) since commit b11d282dbea2 (clk: divider: fix rate calculation for fractional rates). So to yield a rate not bigger than r parent_rate must be <= r * div. The effect of choosing a parent rate that is too big as was done before this patch results in wrongly ruling out good dividers. Note that this is not a complete fix as __clk_round_rate might return a value >= its 2nd parameter. Also for dividers with CLK_DIVIDER_ROUND_CLOSEST set the calculation is not accurate. But this fixes the test case by Sascha Hauer that uses a chain of three dividers under a fixed clock. Fixes: b11d282dbea2 (clk: divider: fix rate calculation for fractional rates) Suggested-by: Sascha Hauer Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Signed-off-by: Michael Turquette --- drivers/clk/clk-divider.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index eff8a862eb08..a1a029092c8d 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -144,12 +144,6 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, divider->flags); } -/* - * The reverse of DIV_ROUND_UP: The maximum number which - * divided by m is r - */ -#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1) - static bool _is_valid_table_div(const struct clk_div_table *table, unsigned int div) { @@ -313,7 +307,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, return i; } parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), - MULT_ROUND_UP(rate, i)); + rate * i); now = DIV_ROUND_UP(parent_rate, i); if (_is_best_div(rate, now, best, flags)) { bestdiv = i; -- cgit v1.2.3 From 26bac95aa88c2b1747808c0b885abe7814c0165d Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Sat, 21 Feb 2015 11:40:24 +0100 Subject: clk: divider: fix selection of divider when rounding to closest MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's an invalid approach to assume that among two divider values the one nearer the exact divider is the better one. Assume a parent rate of 1000 Hz, a divider with CLK_DIVIDER_POWER_OF_TWO and a target rate of 89 Hz. The exact divider is ~ 11.236 so 8 and 16 are the candidates to choose from yielding rates 125 Hz and 62.5 Hz respectivly. While 8 is nearer to 11.236 than 16 is, the latter is still the better divider as 62.5 is nearer to 89 than 125 is. Fixes: 774b514390b1 (clk: divider: Add round to closest divider) Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Acked-by: Maxime Coquelin Signed-off-by: Michael Turquette --- drivers/clk/clk-divider.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index a1a029092c8d..78b2e656ff6a 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -220,6 +220,7 @@ static int _div_round_closest(const struct clk_div_table *table, unsigned long flags) { int up, down, div; + unsigned long up_rate, down_rate; up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate); @@ -231,7 +232,10 @@ static int _div_round_closest(const struct clk_div_table *table, down = _round_down_table(table, div); } - return (up - div) <= (div - down) ? up : down; + up_rate = DIV_ROUND_UP(parent_rate, up); + down_rate = DIV_ROUND_UP(parent_rate, down); + + return (rate - up_rate) <= (down_rate - rate) ? up : down; } static int _div_round(const struct clk_div_table *table, -- cgit v1.2.3 From 9315514252a95bca37be3ef8a93f835ed91c2855 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Sat, 21 Feb 2015 11:40:25 +0100 Subject: clk: divider: fix calculation of initial best divider when rounding to closest MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Similar to the reasoning for the previous commit DIV_ROUND_CLOSEST(parent_rate, rate) might not be the best integer divisor to get a good approximation for rate from parent_rate (given the metric for CLK_DIVIDER_ROUND_CLOSEST). For example assume a parent rate of 1000 Hz and a target rate of 700. Using DIV_ROUND_CLOSEST the suggested divisor gets calculated to 1 resulting in a target rate of 1000 with a delta of 300 to the desired rate. With choosing 2 as divisor however the resulting rate is 500 which is nearer to 700. Signed-off-by: Uwe Kleine-König Acked-by: Sascha Hauer Acked-by: Maxime Coquelin Signed-off-by: Michael Turquette --- drivers/clk/clk-divider.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 78b2e656ff6a..25006a8bb8e6 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -219,17 +219,18 @@ static int _div_round_closest(const struct clk_div_table *table, unsigned long parent_rate, unsigned long rate, unsigned long flags) { - int up, down, div; + int up, down; unsigned long up_rate, down_rate; - up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate); + up = DIV_ROUND_UP(parent_rate, rate); + down = parent_rate / rate; if (flags & CLK_DIVIDER_POWER_OF_TWO) { - up = __roundup_pow_of_two(div); - down = __rounddown_pow_of_two(div); + up = __roundup_pow_of_two(up); + down = __rounddown_pow_of_two(down); } else if (table) { - up = _round_up_table(table, div); - down = _round_down_table(table, div); + up = _round_up_table(table, up); + down = _round_down_table(table, down); } up_rate = DIV_ROUND_UP(parent_rate, up); -- cgit v1.2.3 From f55ac0655a6e42d8299b78c23ee70301f7956d5e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 11 Mar 2015 17:56:31 +0100 Subject: clk: don't export static symbol The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL_GPL; @@ -EXPORT_SYMBOL_GPL(f); // Signed-off-by: Julia Lawall Fixes: 035a61c314eb "clk: Make clk API return per-user struct clk instances" Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index eb0152961d3c..b9f85fc2ce3f 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1350,7 +1350,6 @@ static unsigned long clk_core_get_rate(struct clk_core *clk) return rate; } -EXPORT_SYMBOL_GPL(clk_core_get_rate); /** * clk_get_rate - return the rate of clk -- cgit v1.2.3 From 3d3801effda19b21012b5d1981e96cc277df85fd Mon Sep 17 00:00:00 2001 From: Michael Turquette Date: Wed, 25 Feb 2015 09:11:01 -0800 Subject: clk: introduce clk_is_match Some drivers compare struct clk pointers as a means of knowing if the two pointers reference the same clock hardware. This behavior is dubious (drivers must not dereference struct clk), but did not cause any regressions until the per-user struct clk patch was merged. Now the test for matching clk's will always fail with per-user struct clk's. clk_is_match is introduced to fix the regression and prevent drivers from comparing the pointers manually. Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances") Cc: Russell King Cc: Shawn Guo Cc: Tomeu Vizoso Signed-off-by: Michael Turquette [arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config] Signed-off-by: Arnd Bergmann [sboyd@codeaurora.org: const arguments to clk_is_match() and remove unnecessary ternary operation] Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 26 ++++++++++++++++++++++++++ include/linux/clk.h | 18 ++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index b9f85fc2ce3f..237f23f68bfc 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -2169,6 +2169,32 @@ int clk_get_phase(struct clk *clk) return clk_core_get_phase(clk->core); } +/** + * clk_is_match - check if two clk's point to the same hardware clock + * @p: clk compared against q + * @q: clk compared against p + * + * Returns true if the two struct clk pointers both point to the same hardware + * clock node. Put differently, returns true if struct clk *p and struct clk *q + * share the same struct clk_core object. + * + * Returns false otherwise. Note that two NULL clks are treated as matching. + */ +bool clk_is_match(const struct clk *p, const struct clk *q) +{ + /* trivial case: identical struct clk's or both NULL */ + if (p == q) + return true; + + /* true if clk->core pointers match. Avoid derefing garbage */ + if (!IS_ERR_OR_NULL(p) && !IS_ERR_OR_NULL(q)) + if (p->core == q->core) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(clk_is_match); + /** * __clk_init - initialize the data structures in a struct clk * @dev: device initializing this clk, placeholder for now diff --git a/include/linux/clk.h b/include/linux/clk.h index 8381bbfbc308..68c16a6bedb3 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -125,6 +125,19 @@ int clk_set_phase(struct clk *clk, int degrees); */ int clk_get_phase(struct clk *clk); +/** + * clk_is_match - check if two clk's point to the same hardware clock + * @p: clk compared against q + * @q: clk compared against p + * + * Returns true if the two struct clk pointers both point to the same hardware + * clock node. Put differently, returns true if struct clk *p and struct clk *q + * share the same struct clk_core object. + * + * Returns false otherwise. Note that two NULL clks are treated as matching. + */ +bool clk_is_match(const struct clk *p, const struct clk *q); + #else static inline long clk_get_accuracy(struct clk *clk) @@ -142,6 +155,11 @@ static inline long clk_get_phase(struct clk *clk) return -ENOTSUPP; } +static inline bool clk_is_match(const struct clk *p, const struct clk *q) +{ + return p == q; +} + #endif /** -- cgit v1.2.3 From a51139fdbcecd208b96d1b8038b7a9eea9455acc Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 Feb 2015 22:53:32 +0800 Subject: ARM: imx: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo Signed-off-by: Michael Turquette Signed-off-by: Stephen Boyd --- arch/arm/mach-imx/mach-imx6q.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 4ad6e473cf83..9de3412af406 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void) * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad * (external OSC), and we need to clear the bit. */ - clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : - IMX6Q_GPR1_ENET_CLK_SEL_PAD; + clksel = clk_is_match(ptp_clk, enet_ref) ? + IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) regmap_update_bits(gpr, IOMUXC_GPR1, -- cgit v1.2.3 From 81efec851477957f964f9978921d5ae36d521d45 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 Feb 2015 22:53:37 +0800 Subject: ASoC: fsl_spdif: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo Signed-off-by: Michael Turquette Signed-off-by: Stephen Boyd --- sound/soc/fsl/fsl_spdif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 75870c0ea2c9..91eb3aef7f02 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1049,7 +1049,7 @@ static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv, enum spdif_txrate index, bool round) { const u32 rate[] = { 32000, 44100, 48000, 96000, 192000 }; - bool is_sysclk = clk == spdif_priv->sysclk; + bool is_sysclk = clk_is_match(clk, spdif_priv->sysclk); u64 rate_ideal, rate_actual, sub; u32 sysclk_dfmin, sysclk_dfmax; u32 txclk_df, sysclk_df, arate; @@ -1143,7 +1143,7 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, spdif_priv->txclk_src[index], rate[index]); dev_dbg(&pdev->dev, "use txclk df %d for %dHz sample rate\n", spdif_priv->txclk_df[index], rate[index]); - if (spdif_priv->txclk[index] == spdif_priv->sysclk) + if (clk_is_match(spdif_priv->txclk[index], spdif_priv->sysclk)) dev_dbg(&pdev->dev, "use sysclk df %d for %dHz sample rate\n", spdif_priv->sysclk_df[index], rate[index]); dev_dbg(&pdev->dev, "the best rate for %dHz sample rate is %dHz\n", -- cgit v1.2.3 From aaa6d06282a749d0df8e5e22e73f8a3372f96853 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 25 Feb 2015 22:53:38 +0800 Subject: ASoC: kirkwood: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo Signed-off-by: Michael Turquette Signed-off-by: Stephen Boyd --- sound/soc/kirkwood/kirkwood-i2s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index def7d8260c4e..d19483081f9b 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -579,7 +579,7 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev) if (PTR_ERR(priv->extclk) == -EPROBE_DEFER) return -EPROBE_DEFER; } else { - if (priv->extclk == priv->clk) { + if (clk_is_match(priv->extclk, priv->clk)) { devm_clk_put(&pdev->dev, priv->extclk); priv->extclk = ERR_PTR(-EINVAL); } else { -- cgit v1.2.3