From 1c810739097fdeb31b393b67a0a1e3d7ffdd9f63 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 17 May 2019 17:37:22 +0100 Subject: drm/arm/hdlcd: Allow a bit of clock tolerance On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz resolution in order to avoid the tiny System Control Processor spending aeons trying to calculate exact PLL coefficients. This means that modes like my oddball 1600x1200 with 130.89MHz clock get rejected since the rate cannot be matched exactly. In practice, though, this mode works quite happily with the clock at 131MHz, so let's relax the check to allow a little bit of slop. Signed-off-by: Robin Murphy Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/hdlcd_crtc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c index ecac6fe0b213..a3efa28436ea 100644 --- a/drivers/gpu/drm/arm/hdlcd_crtc.c +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c @@ -193,7 +193,8 @@ static enum drm_mode_status hdlcd_crtc_mode_valid(struct drm_crtc *crtc, long rate, clk_rate = mode->clock * 1000; rate = clk_round_rate(hdlcd->clk, clk_rate); - if (rate != clk_rate) { + /* 0.1% seems a close enough tolerance for the TDA19988 on Juno */ + if (abs(rate - clk_rate) * 1000 > clk_rate) { /* clock required by mode not supported by hardware */ return MODE_NOCLOCK; } -- cgit v1.2.3