From 1b9c4134c126aa8ae00a57672d4a4eaecc436b54 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Mon, 20 Jun 2011 12:51:22 -0700 Subject: myri_sbus: remove driver Remove the myri_sbus driver. Why? * There is no possibility of ethernet mode on this adapter, so it's Myrinet only. * It won't inter-op with modern versions of Myrinet, and thus can only work with legacy adapters. * There are no in-kernel Linux drivers for the PCI version of this adapter, so it only can work on ~15 year old Sun hardware. It's long in the tooth, let's take it to the knackers. Signed-off-by: Jon Mason Signed-off-by: David S. Miller --- drivers/net/Kconfig | 9 - drivers/net/Makefile | 1 - drivers/net/myri_sbus.c | 1187 ----------------------------------------------- drivers/net/myri_sbus.h | 311 ------------- 4 files changed, 1508 deletions(-) delete mode 100644 drivers/net/myri_sbus.c delete mode 100644 drivers/net/myri_sbus.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 399cf4b28aef..f5919c28a4b8 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2196,15 +2196,6 @@ config IGBVF source "drivers/net/ixp2000/Kconfig" -config MYRI_SBUS - tristate "MyriCOM Gigabit Ethernet support" - depends on SBUS - help - This driver supports MyriCOM Sbus gigabit Ethernet cards. - - To compile this driver as a module, choose M here: the module - will be called myri_sbus. This is recommended. - config NS83820 tristate "National Semiconductor DP83820 support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 800684104b17..86f6c8d08407 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -59,7 +59,6 @@ obj-$(CONFIG_HAPPYMEAL) += sunhme.o obj-$(CONFIG_SUNLANCE) += sunlance.o obj-$(CONFIG_SUNQE) += sunqe.o obj-$(CONFIG_SUNBMAC) += sunbmac.o -obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o obj-$(CONFIG_CASSINI) += cassini.o obj-$(CONFIG_SUNVNET) += sunvnet.o diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c deleted file mode 100644 index 53aeea4b536e..000000000000 --- a/drivers/net/myri_sbus.c +++ /dev/null @@ -1,1187 +0,0 @@ -/* myri_sbus.c: MyriCOM MyriNET SBUS card driver. - * - * Copyright (C) 1996, 1999, 2006, 2008 David S. Miller (davem@davemloft.net) - */ - -static char version[] = - "myri_sbus.c:v2.0 June 23, 2006 David S. Miller (davem@davemloft.net)\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "myri_sbus.h" - -/* #define DEBUG_DETECT */ -/* #define DEBUG_IRQ */ -/* #define DEBUG_TRANSMIT */ -/* #define DEBUG_RECEIVE */ -/* #define DEBUG_HEADER */ - -#ifdef DEBUG_DETECT -#define DET(x) printk x -#else -#define DET(x) -#endif - -#ifdef DEBUG_IRQ -#define DIRQ(x) printk x -#else -#define DIRQ(x) -#endif - -#ifdef DEBUG_TRANSMIT -#define DTX(x) printk x -#else -#define DTX(x) -#endif - -#ifdef DEBUG_RECEIVE -#define DRX(x) printk x -#else -#define DRX(x) -#endif - -#ifdef DEBUG_HEADER -#define DHDR(x) printk x -#else -#define DHDR(x) -#endif - -/* Firmware name */ -#define FWNAME "myricom/lanai.bin" - -static void myri_reset_off(void __iomem *lp, void __iomem *cregs) -{ - /* Clear IRQ mask. */ - sbus_writel(0, lp + LANAI_EIMASK); - - /* Turn RESET function off. */ - sbus_writel(CONTROL_ROFF, cregs + MYRICTRL_CTRL); -} - -static void myri_reset_on(void __iomem *cregs) -{ - /* Enable RESET function. */ - sbus_writel(CONTROL_RON, cregs + MYRICTRL_CTRL); - - /* Disable IRQ's. */ - sbus_writel(CONTROL_DIRQ, cregs + MYRICTRL_CTRL); -} - -static void myri_disable_irq(void __iomem *lp, void __iomem *cregs) -{ - sbus_writel(CONTROL_DIRQ, cregs + MYRICTRL_CTRL); - sbus_writel(0, lp + LANAI_EIMASK); - sbus_writel(ISTAT_HOST, lp + LANAI_ISTAT); -} - -static void myri_enable_irq(void __iomem *lp, void __iomem *cregs) -{ - sbus_writel(CONTROL_EIRQ, cregs + MYRICTRL_CTRL); - sbus_writel(ISTAT_HOST, lp + LANAI_EIMASK); -} - -static inline void bang_the_chip(struct myri_eth *mp) -{ - struct myri_shmem __iomem *shmem = mp->shmem; - void __iomem *cregs = mp->cregs; - - sbus_writel(1, &shmem->send); - sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL); -} - -static int myri_do_handshake(struct myri_eth *mp) -{ - struct myri_shmem __iomem *shmem = mp->shmem; - void __iomem *cregs = mp->cregs; - struct myri_channel __iomem *chan = &shmem->channel; - int tick = 0; - - DET(("myri_do_handshake: ")); - if (sbus_readl(&chan->state) == STATE_READY) { - DET(("Already STATE_READY, failed.\n")); - return -1; /* We're hosed... */ - } - - myri_disable_irq(mp->lregs, cregs); - - while (tick++ < 25) { - u32 softstate; - - /* Wake it up. */ - DET(("shakedown, CONTROL_WON, ")); - sbus_writel(1, &shmem->shakedown); - sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL); - - softstate = sbus_readl(&chan->state); - DET(("chanstate[%08x] ", softstate)); - if (softstate == STATE_READY) { - DET(("wakeup successful, ")); - break; - } - - if (softstate != STATE_WFN) { - DET(("not WFN setting that, ")); - sbus_writel(STATE_WFN, &chan->state); - } - - udelay(20); - } - - myri_enable_irq(mp->lregs, cregs); - - if (tick > 25) { - DET(("25 ticks we lose, failure.\n")); - return -1; - } - DET(("success\n")); - return 0; -} - -static int __devinit myri_load_lanai(struct myri_eth *mp) -{ - const struct firmware *fw; - struct net_device *dev = mp->dev; - struct myri_shmem __iomem *shmem = mp->shmem; - void __iomem *rptr; - int i, lanai4_data_size; - - myri_disable_irq(mp->lregs, mp->cregs); - myri_reset_on(mp->cregs); - - rptr = mp->lanai; - for (i = 0; i < mp->eeprom.ramsz; i++) - sbus_writeb(0, rptr + i); - - if (mp->eeprom.cpuvers >= CPUVERS_3_0) - sbus_writel(mp->eeprom.cval, mp->lregs + LANAI_CVAL); - - i = request_firmware(&fw, FWNAME, &mp->myri_op->dev); - if (i) { - printk(KERN_ERR "Failed to load image \"%s\" err %d\n", - FWNAME, i); - return i; - } - if (fw->size < 2) { - printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", - fw->size, FWNAME); - release_firmware(fw); - return -EINVAL; - } - lanai4_data_size = fw->data[0] << 8 | fw->data[1]; - - /* Load executable code. */ - for (i = 2; i < fw->size; i++) - sbus_writeb(fw->data[i], rptr++); - - /* Load data segment. */ - for (i = 0; i < lanai4_data_size; i++) - sbus_writeb(0, rptr++); - - /* Set device address. */ - sbus_writeb(0, &shmem->addr[0]); - sbus_writeb(0, &shmem->addr[1]); - for (i = 0; i < 6; i++) - sbus_writeb(dev->dev_addr[i], - &shmem->addr[i + 2]); - - /* Set SBUS bursts and interrupt mask. */ - sbus_writel(((mp->myri_bursts & 0xf8) >> 3), &shmem->burst); - sbus_writel(SHMEM_IMASK_RX, &shmem->imask); - - /* Release the LANAI. */ - myri_disable_irq(mp->lregs, mp->cregs); - myri_reset_off(mp->lregs, mp->cregs); - myri_disable_irq(mp->lregs, mp->cregs); - - /* Wait for the reset to complete. */ - for (i = 0; i < 5000; i++) { - if (sbus_readl(&shmem->channel.state) != STATE_READY) - break; - else - udelay(10); - } - - if (i == 5000) - printk(KERN_ERR "myricom: Chip would not reset after firmware load.\n"); - - i = myri_do_handshake(mp); - if (i) - printk(KERN_ERR "myricom: Handshake with LANAI failed.\n"); - - if (mp->eeprom.cpuvers == CPUVERS_4_0) - sbus_writel(0, mp->lregs + LANAI_VERS); - - release_firmware(fw); - return i; -} - -static void myri_clean_rings(struct myri_eth *mp) -{ - struct sendq __iomem *sq = mp->sq; - struct recvq __iomem *rq = mp->rq; - int i; - - sbus_writel(0, &rq->tail); - sbus_writel(0, &rq->head); - for (i = 0; i < (RX_RING_SIZE+1); i++) { - if (mp->rx_skbs[i] != NULL) { - struct myri_rxd __iomem *rxd = &rq->myri_rxd[i]; - u32 dma_addr; - - dma_addr = sbus_readl(&rxd->myri_scatters[0].addr); - dma_unmap_single(&mp->myri_op->dev, dma_addr, - RX_ALLOC_SIZE, DMA_FROM_DEVICE); - dev_kfree_skb(mp->rx_skbs[i]); - mp->rx_skbs[i] = NULL; - } - } - - mp->tx_old = 0; - sbus_writel(0, &sq->tail); - sbus_writel(0, &sq->head); - for (i = 0; i < TX_RING_SIZE; i++) { - if (mp->tx_skbs[i] != NULL) { - struct sk_buff *skb = mp->tx_skbs[i]; - struct myri_txd __iomem *txd = &sq->myri_txd[i]; - u32 dma_addr; - - dma_addr = sbus_readl(&txd->myri_gathers[0].addr); - dma_unmap_single(&mp->myri_op->dev, dma_addr, - (skb->len + 3) & ~3, - DMA_TO_DEVICE); - dev_kfree_skb(mp->tx_skbs[i]); - mp->tx_skbs[i] = NULL; - } - } -} - -static void myri_init_rings(struct myri_eth *mp, int from_irq) -{ - struct recvq __iomem *rq = mp->rq; - struct myri_rxd __iomem *rxd = &rq->myri_rxd[0]; - struct net_device *dev = mp->dev; - gfp_t gfp_flags = GFP_KERNEL; - int i; - - if (from_irq || in_interrupt()) - gfp_flags = GFP_ATOMIC; - - myri_clean_rings(mp); - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = myri_alloc_skb(RX_ALLOC_SIZE, gfp_flags); - u32 dma_addr; - - if (!skb) - continue; - mp->rx_skbs[i] = skb; - skb->dev = dev; - skb_put(skb, RX_ALLOC_SIZE); - - dma_addr = dma_map_single(&mp->myri_op->dev, - skb->data, RX_ALLOC_SIZE, - DMA_FROM_DEVICE); - sbus_writel(dma_addr, &rxd[i].myri_scatters[0].addr); - sbus_writel(RX_ALLOC_SIZE, &rxd[i].myri_scatters[0].len); - sbus_writel(i, &rxd[i].ctx); - sbus_writel(1, &rxd[i].num_sg); - } - sbus_writel(0, &rq->head); - sbus_writel(RX_RING_SIZE, &rq->tail); -} - -static int myri_init(struct myri_eth *mp, int from_irq) -{ - myri_init_rings(mp, from_irq); - return 0; -} - -static void myri_is_not_so_happy(struct myri_eth *mp) -{ -} - -#ifdef DEBUG_HEADER -static void dump_ehdr(struct ethhdr *ehdr) -{ - printk("ehdr[h_dst(%pM)" - "h_source(%pM)" - "h_proto(%04x)]\n", - ehdr->h_dest, ehdr->h_source, ehdr->h_proto); -} - -static void dump_ehdr_and_myripad(unsigned char *stuff) -{ - struct ethhdr *ehdr = (struct ethhdr *) (stuff + 2); - - printk("pad[%02x:%02x]", stuff[0], stuff[1]); - dump_ehdr(ehdr); -} -#endif - -static void myri_tx(struct myri_eth *mp, struct net_device *dev) -{ - struct sendq __iomem *sq= mp->sq; - int entry = mp->tx_old; - int limit = sbus_readl(&sq->head); - - DTX(("entry[%d] limit[%d] ", entry, limit)); - if (entry == limit) - return; - while (entry != limit) { - struct sk_buff *skb = mp->tx_skbs[entry]; - u32 dma_addr; - - DTX(("SKB[%d] ", entry)); - dma_addr = sbus_readl(&sq->myri_txd[entry].myri_gathers[0].addr); - dma_unmap_single(&mp->myri_op->dev, dma_addr, - skb->len, DMA_TO_DEVICE); - dev_kfree_skb(skb); - mp->tx_skbs[entry] = NULL; - dev->stats.tx_packets++; - entry = NEXT_TX(entry); - } - mp->tx_old = entry; -} - -/* Determine the packet's protocol ID. The rule here is that we - * assume 802.3 if the type field is short enough to be a length. - * This is normal practice and works for any 'now in use' protocol. - */ -static __be16 myri_type_trans(struct sk_buff *skb, struct net_device *dev) -{ - struct ethhdr *eth; - unsigned char *rawp; - - skb_set_mac_header(skb, MYRI_PAD_LEN); - skb_pull(skb, dev->hard_header_len); - eth = eth_hdr(skb); - -#ifdef DEBUG_HEADER - DHDR(("myri_type_trans: ")); - dump_ehdr(eth); -#endif - if (*eth->h_dest & 1) { - if (memcmp(eth->h_dest, dev->broadcast, ETH_ALEN)==0) - skb->pkt_type = PACKET_BROADCAST; - else - skb->pkt_type = PACKET_MULTICAST; - } else if (dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { - if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN)) - skb->pkt_type = PACKET_OTHERHOST; - } - - if (ntohs(eth->h_proto) >= 1536) - return eth->h_proto; - - rawp = skb->data; - - /* This is a magic hack to spot IPX packets. Older Novell breaks - * the protocol design and runs IPX over 802.3 without an 802.2 LLC - * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This - * won't work for fault tolerant netware but does for the rest. - */ - if (*(unsigned short *)rawp == 0xFFFF) - return htons(ETH_P_802_3); - - /* Real 802.2 LLC */ - return htons(ETH_P_802_2); -} - -static void myri_rx(struct myri_eth *mp, struct net_device *dev) -{ - struct recvq __iomem *rq = mp->rq; - struct recvq __iomem *rqa = mp->rqack; - int entry = sbus_readl(&rqa->head); - int limit = sbus_readl(&rqa->tail); - int drops; - - DRX(("entry[%d] limit[%d] ", entry, limit)); - if (entry == limit) - return; - drops = 0; - DRX(("\n")); - while (entry != limit) { - struct myri_rxd __iomem *rxdack = &rqa->myri_rxd[entry]; - u32 csum = sbus_readl(&rxdack->csum); - int len = sbus_readl(&rxdack->myri_scatters[0].len); - int index = sbus_readl(&rxdack->ctx); - struct myri_rxd __iomem *rxd = &rq->myri_rxd[sbus_readl(&rq->tail)]; - struct sk_buff *skb = mp->rx_skbs[index]; - - /* Ack it. */ - sbus_writel(NEXT_RX(entry), &rqa->head); - - /* Check for errors. */ - DRX(("rxd[%d]: %p len[%d] csum[%08x] ", entry, rxd, len, csum)); - dma_sync_single_for_cpu(&mp->myri_op->dev, - sbus_readl(&rxd->myri_scatters[0].addr), - RX_ALLOC_SIZE, DMA_FROM_DEVICE); - if (len < (ETH_HLEN + MYRI_PAD_LEN) || (skb->data[0] != MYRI_PAD_LEN)) { - DRX(("ERROR[")); - dev->stats.rx_errors++; - if (len < (ETH_HLEN + MYRI_PAD_LEN)) { - DRX(("BAD_LENGTH] ")); - dev->stats.rx_length_errors++; - } else { - DRX(("NO_PADDING] ")); - dev->stats.rx_frame_errors++; - } - - /* Return it to the LANAI. */ - drop_it: - drops++; - DRX(("DROP ")); - dev->stats.rx_dropped++; - dma_sync_single_for_device(&mp->myri_op->dev, - sbus_readl(&rxd->myri_scatters[0].addr), - RX_ALLOC_SIZE, - DMA_FROM_DEVICE); - sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len); - sbus_writel(index, &rxd->ctx); - sbus_writel(1, &rxd->num_sg); - sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail); - goto next; - } - - DRX(("len[%d] ", len)); - if (len > RX_COPY_THRESHOLD) { - struct sk_buff *new_skb; - u32 dma_addr; - - DRX(("BIGBUFF ")); - new_skb = myri_alloc_skb(RX_ALLOC_SIZE, GFP_ATOMIC); - if (new_skb == NULL) { - DRX(("skb_alloc(FAILED) ")); - goto drop_it; - } - dma_unmap_single(&mp->myri_op->dev, - sbus_readl(&rxd->myri_scatters[0].addr), - RX_ALLOC_SIZE, - DMA_FROM_DEVICE); - mp->rx_skbs[index] = new_skb; - new_skb->dev = dev; - skb_put(new_skb, RX_ALLOC_SIZE); - dma_addr = dma_map_single(&mp->myri_op->dev, - new_skb->data, - RX_ALLOC_SIZE, - DMA_FROM_DEVICE); - sbus_writel(dma_addr, &rxd->myri_scatters[0].addr); - sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len); - sbus_writel(index, &rxd->ctx); - sbus_writel(1, &rxd->num_sg); - sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail); - - /* Trim the original skb for the netif. */ - DRX(("trim(%d) ", len)); - skb_trim(skb, len); - } else { - struct sk_buff *copy_skb = dev_alloc_skb(len); - - DRX(("SMALLBUFF ")); - if (copy_skb == NULL) { - DRX(("dev_alloc_skb(FAILED) ")); - goto drop_it; - } - /* DMA sync already done above. */ - copy_skb->dev = dev; - DRX(("resv_and_put ")); - skb_put(copy_skb, len); - skb_copy_from_linear_data(skb, copy_skb->data, len); - - /* Reuse original ring buffer. */ - DRX(("reuse ")); - dma_sync_single_for_device(&mp->myri_op->dev, - sbus_readl(&rxd->myri_scatters[0].addr), - RX_ALLOC_SIZE, - DMA_FROM_DEVICE); - sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len); - sbus_writel(index, &rxd->ctx); - sbus_writel(1, &rxd->num_sg); - sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail); - - skb = copy_skb; - } - - /* Just like the happy meal we get checksums from this card. */ - skb->csum = csum; - skb->ip_summed = CHECKSUM_UNNECESSARY; /* XXX */ - - skb->protocol = myri_type_trans(skb, dev); - DRX(("prot[%04x] netif_rx ", skb->protocol)); - netif_rx(skb); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += len; - next: - DRX(("NEXT\n")); - entry = NEXT_RX(entry); - } -} - -static irqreturn_t myri_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct myri_eth *mp = netdev_priv(dev); - void __iomem *lregs = mp->lregs; - struct myri_channel __iomem *chan = &mp->shmem->channel; - unsigned long flags; - u32 status; - int handled = 0; - - spin_lock_irqsave(&mp->irq_lock, flags); - - status = sbus_readl(lregs + LANAI_ISTAT); - DIRQ(("myri_interrupt: status[%08x] ", status)); - if (status & ISTAT_HOST) { - u32 softstate; - - handled = 1; - DIRQ(("IRQ_DISAB ")); - myri_disable_irq(lregs, mp->cregs); - softstate = sbus_readl(&chan->state); - DIRQ(("state[%08x] ", softstate)); - if (softstate != STATE_READY) { - DIRQ(("myri_not_so_happy ")); - myri_is_not_so_happy(mp); - } - DIRQ(("\nmyri_rx: ")); - myri_rx(mp, dev); - DIRQ(("\nistat=ISTAT_HOST ")); - sbus_writel(ISTAT_HOST, lregs + LANAI_ISTAT); - DIRQ(("IRQ_ENAB ")); - myri_enable_irq(lregs, mp->cregs); - } - DIRQ(("\n")); - - spin_unlock_irqrestore(&mp->irq_lock, flags); - - return IRQ_RETVAL(handled); -} - -static int myri_open(struct net_device *dev) -{ - struct myri_eth *mp = netdev_priv(dev); - - return myri_init(mp, in_interrupt()); -} - -static int myri_close(struct net_device *dev) -{ - struct myri_eth *mp = netdev_priv(dev); - - myri_clean_rings(mp); - return 0; -} - -static void myri_tx_timeout(struct net_device *dev) -{ - struct myri_eth *mp = netdev_priv(dev); - - printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name); - - dev->stats.tx_errors++; - myri_init(mp, 0); - netif_wake_queue(dev); -} - -static int myri_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct myri_eth *mp = netdev_priv(dev); - struct sendq __iomem *sq = mp->sq; - struct myri_txd __iomem *txd; - unsigned long flags; - unsigned int head, tail; - int len, entry; - u32 dma_addr; - - DTX(("myri_start_xmit: ")); - - myri_tx(mp, dev); - - netif_stop_queue(dev); - - /* This is just to prevent multiple PIO reads for TX_BUFFS_AVAIL. */ - head = sbus_readl(&sq->head); - tail = sbus_readl(&sq->tail); - - if (!TX_BUFFS_AVAIL(head, tail)) { - DTX(("no buffs available, returning 1\n")); - return NETDEV_TX_BUSY; - } - - spin_lock_irqsave(&mp->irq_lock, flags); - - DHDR(("xmit[skbdata(%p)]\n", skb->data)); -#ifdef DEBUG_HEADER - dump_ehdr_and_myripad(((unsigned char *) skb->data)); -#endif - - /* XXX Maybe this can go as well. */ - len = skb->len; - if (len & 3) { - DTX(("len&3 ")); - len = (len + 4) & (~3); - } - - entry = sbus_readl(&sq->tail); - - txd = &sq->myri_txd[entry]; - mp->tx_skbs[entry] = skb; - - /* Must do this before we sbus map it. */ - if (skb->data[MYRI_PAD_LEN] & 0x1) { - sbus_writew(0xffff, &txd->addr[0]); - sbus_writew(0xffff, &txd->addr[1]); - sbus_writew(0xffff, &txd->addr[2]); - sbus_writew(0xffff, &txd->addr[3]); - } else { - sbus_writew(0xffff, &txd->addr[0]); - sbus_writew((skb->data[0] << 8) | skb->data[1], &txd->addr[1]); - sbus_writew((skb->data[2] << 8) | skb->data[3], &txd->addr[2]); - sbus_writew((skb->data[4] << 8) | skb->data[5], &txd->addr[3]); - } - - dma_addr = dma_map_single(&mp->myri_op->dev, skb->data, - len, DMA_TO_DEVICE); - sbus_writel(dma_addr, &txd->myri_gathers[0].addr); - sbus_writel(len, &txd->myri_gathers[0].len); - sbus_writel(1, &txd->num_sg); - sbus_writel(KERNEL_CHANNEL, &txd->chan); - sbus_writel(len, &txd->len); - sbus_writel((u32)-1, &txd->csum_off); - sbus_writel(0, &txd->csum_field); - - sbus_writel(NEXT_TX(entry), &sq->tail); - DTX(("BangTheChip ")); - bang_the_chip(mp); - - DTX(("tbusy=0, returning 0\n")); - netif_start_queue(dev); - spin_unlock_irqrestore(&mp->irq_lock, flags); - return NETDEV_TX_OK; -} - -/* Create the MyriNet MAC header for an arbitrary protocol layer - * - * saddr=NULL means use device source address - * daddr=NULL means leave destination address (eg unresolved arp) - */ -static int myri_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, const void *daddr, - const void *saddr, unsigned len) -{ - struct ethhdr *eth = (struct ethhdr *) skb_push(skb, ETH_HLEN); - unsigned char *pad = (unsigned char *) skb_push(skb, MYRI_PAD_LEN); - -#ifdef DEBUG_HEADER - DHDR(("myri_header: pad[%02x,%02x] ", pad[0], pad[1])); - dump_ehdr(eth); -#endif - - /* Set the MyriNET padding identifier. */ - pad[0] = MYRI_PAD_LEN; - pad[1] = 0xab; - - /* Set the protocol type. For a packet of type ETH_P_802_3/2 we put the - * length in here instead. - */ - if (type != ETH_P_802_3 && type != ETH_P_802_2) - eth->h_proto = htons(type); - else - eth->h_proto = htons(len); - - /* Set the source hardware address. */ - if (saddr) - memcpy(eth->h_source, saddr, dev->addr_len); - else - memcpy(eth->h_source, dev->dev_addr, dev->addr_len); - - /* Anyway, the loopback-device should never use this function... */ - if (dev->flags & IFF_LOOPBACK) { - int i; - for (i = 0; i < dev->addr_len; i++) - eth->h_dest[i] = 0; - return dev->hard_header_len; - } - - if (daddr) { - memcpy(eth->h_dest, daddr, dev->addr_len); - return dev->hard_header_len; - } - return -dev->hard_header_len; -} - -/* Rebuild the MyriNet MAC header. This is called after an ARP - * (or in future other address resolution) has completed on this - * sk_buff. We now let ARP fill in the other fields. - */ -static int myri_rebuild_header(struct sk_buff *skb) -{ - unsigned char *pad = (unsigned char *) skb->data; - struct ethhdr *eth = (struct ethhdr *) (pad + MYRI_PAD_LEN); - struct net_device *dev = skb->dev; - -#ifdef DEBUG_HEADER - DHDR(("myri_rebuild_header: pad[%02x,%02x] ", pad[0], pad[1])); - dump_ehdr(eth); -#endif - - /* Refill MyriNet padding identifiers, this is just being anal. */ - pad[0] = MYRI_PAD_LEN; - pad[1] = 0xab; - - switch (eth->h_proto) - { -#ifdef CONFIG_INET - case cpu_to_be16(ETH_P_IP): - return arp_find(eth->h_dest, skb); -#endif - - default: - printk(KERN_DEBUG - "%s: unable to resolve type %X addresses.\n", - dev->name, (int)eth->h_proto); - - memcpy(eth->h_source, dev->dev_addr, dev->addr_len); - return 0; - break; - } - - return 0; -} - -static int myri_header_cache(const struct neighbour *neigh, struct hh_cache *hh) -{ - unsigned short type = hh->hh_type; - unsigned char *pad; - struct ethhdr *eth; - const struct net_device *dev = neigh->dev; - - pad = ((unsigned char *) hh->hh_data) + - HH_DATA_OFF(sizeof(*eth) + MYRI_PAD_LEN); - eth = (struct ethhdr *) (pad + MYRI_PAD_LEN); - - if (type == htons(ETH_P_802_3)) - return -1; - - /* Refill MyriNet padding identifiers, this is just being anal. */ - pad[0] = MYRI_PAD_LEN; - pad[1] = 0xab; - - eth->h_proto = type; - memcpy(eth->h_source, dev->dev_addr, dev->addr_len); - memcpy(eth->h_dest, neigh->ha, dev->addr_len); - hh->hh_len = 16; - return 0; -} - - -/* Called by Address Resolution module to notify changes in address. */ -void myri_header_cache_update(struct hh_cache *hh, - const struct net_device *dev, - const unsigned char * haddr) -{ - memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)), - haddr, dev->addr_len); -} - -static int myri_change_mtu(struct net_device *dev, int new_mtu) -{ - if ((new_mtu < (ETH_HLEN + MYRI_PAD_LEN)) || (new_mtu > MYRINET_MTU)) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - -static void myri_set_multicast(struct net_device *dev) -{ - /* Do nothing, all MyriCOM nodes transmit multicast frames - * as broadcast packets... - */ -} - -static inline void set_boardid_from_idprom(struct myri_eth *mp, int num) -{ - mp->eeprom.id[0] = 0; - mp->eeprom.id[1] = idprom->id_machtype; - mp->eeprom.id[2] = (idprom->id_sernum >> 16) & 0xff; - mp->eeprom.id[3] = (idprom->id_sernum >> 8) & 0xff; - mp->eeprom.id[4] = (idprom->id_sernum >> 0) & 0xff; - mp->eeprom.id[5] = num; -} - -static inline void determine_reg_space_size(struct myri_eth *mp) -{ - switch(mp->eeprom.cpuvers) { - case CPUVERS_2_3: - case CPUVERS_3_0: - case CPUVERS_3_1: - case CPUVERS_3_2: - mp->reg_size = (3 * 128 * 1024) + 4096; - break; - - case CPUVERS_4_0: - case CPUVERS_4_1: - mp->reg_size = ((4096<<1) + mp->eeprom.ramsz); - break; - - case CPUVERS_4_2: - case CPUVERS_5_0: - default: - printk("myricom: AIEEE weird cpu version %04x assuming pre4.0\n", - mp->eeprom.cpuvers); - mp->reg_size = (3 * 128 * 1024) + 4096; - } -} - -#ifdef DEBUG_DETECT -static void dump_eeprom(struct myri_eth *mp) -{ - printk("EEPROM: clockval[%08x] cpuvers[%04x] " - "id[%02x,%02x,%02x,%02x,%02x,%02x]\n", - mp->eeprom.cval, mp->eeprom.cpuvers, - mp->eeprom.id[0], mp->eeprom.id[1], mp->eeprom.id[2], - mp->eeprom.id[3], mp->eeprom.id[4], mp->eeprom.id[5]); - printk("EEPROM: ramsz[%08x]\n", mp->eeprom.ramsz); - printk("EEPROM: fvers[%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n", - mp->eeprom.fvers[0], mp->eeprom.fvers[1], mp->eeprom.fvers[2], - mp->eeprom.fvers[3], mp->eeprom.fvers[4], mp->eeprom.fvers[5], - mp->eeprom.fvers[6], mp->eeprom.fvers[7]); - printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n", - mp->eeprom.fvers[8], mp->eeprom.fvers[9], mp->eeprom.fvers[10], - mp->eeprom.fvers[11], mp->eeprom.fvers[12], mp->eeprom.fvers[13], - mp->eeprom.fvers[14], mp->eeprom.fvers[15]); - printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n", - mp->eeprom.fvers[16], mp->eeprom.fvers[17], mp->eeprom.fvers[18], - mp->eeprom.fvers[19], mp->eeprom.fvers[20], mp->eeprom.fvers[21], - mp->eeprom.fvers[22], mp->eeprom.fvers[23]); - printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x]\n", - mp->eeprom.fvers[24], mp->eeprom.fvers[25], mp->eeprom.fvers[26], - mp->eeprom.fvers[27], mp->eeprom.fvers[28], mp->eeprom.fvers[29], - mp->eeprom.fvers[30], mp->eeprom.fvers[31]); - printk("EEPROM: mvers[%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n", - mp->eeprom.mvers[0], mp->eeprom.mvers[1], mp->eeprom.mvers[2], - mp->eeprom.mvers[3], mp->eeprom.mvers[4], mp->eeprom.mvers[5], - mp->eeprom.mvers[6], mp->eeprom.mvers[7]); - printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x]\n", - mp->eeprom.mvers[8], mp->eeprom.mvers[9], mp->eeprom.mvers[10], - mp->eeprom.mvers[11], mp->eeprom.mvers[12], mp->eeprom.mvers[13], - mp->eeprom.mvers[14], mp->eeprom.mvers[15]); - printk("EEPROM: dlval[%04x] brd_type[%04x] bus_type[%04x] prod_code[%04x]\n", - mp->eeprom.dlval, mp->eeprom.brd_type, mp->eeprom.bus_type, - mp->eeprom.prod_code); - printk("EEPROM: serial_num[%08x]\n", mp->eeprom.serial_num); -} -#endif - -static const struct header_ops myri_header_ops = { - .create = myri_header, - .rebuild = myri_rebuild_header, - .cache = myri_header_cache, - .cache_update = myri_header_cache_update, -}; - -static const struct net_device_ops myri_ops = { - .ndo_open = myri_open, - .ndo_stop = myri_close, - .ndo_start_xmit = myri_start_xmit, - .ndo_set_multicast_list = myri_set_multicast, - .ndo_tx_timeout = myri_tx_timeout, - .ndo_change_mtu = myri_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __devinit myri_sbus_probe(struct platform_device *op) -{ - struct device_node *dp = op->dev.of_node; - static unsigned version_printed; - struct net_device *dev; - struct myri_eth *mp; - const void *prop; - static int num; - int i, len; - - DET(("myri_ether_init(%p,%d):\n", op, num)); - dev = alloc_etherdev(sizeof(struct myri_eth)); - if (!dev) - return -ENOMEM; - - if (version_printed++ == 0) - printk(version); - - SET_NETDEV_DEV(dev, &op->dev); - - mp = netdev_priv(dev); - spin_lock_init(&mp->irq_lock); - mp->myri_op = op; - - /* Clean out skb arrays. */ - for (i = 0; i < (RX_RING_SIZE + 1); i++) - mp->rx_skbs[i] = NULL; - - for (i = 0; i < TX_RING_SIZE; i++) - mp->tx_skbs[i] = NULL; - - /* First check for EEPROM information. */ - prop = of_get_property(dp, "myrinet-eeprom-info", &len); - - if (prop) - memcpy(&mp->eeprom, prop, sizeof(struct myri_eeprom)); - if (!prop) { - /* No eeprom property, must cook up the values ourselves. */ - DET(("No EEPROM: ")); - mp->eeprom.bus_type = BUS_TYPE_SBUS; - mp->eeprom.cpuvers = - of_getintprop_default(dp, "cpu_version", 0); - mp->eeprom.cval = - of_getintprop_default(dp, "clock_value", 0); - mp->eeprom.ramsz = of_getintprop_default(dp, "sram_size", 0); - if (!mp->eeprom.cpuvers) - mp->eeprom.cpuvers = CPUVERS_2_3; - if (mp->eeprom.cpuvers < CPUVERS_3_0) - mp->eeprom.cval = 0; - if (!mp->eeprom.ramsz) - mp->eeprom.ramsz = (128 * 1024); - - prop = of_get_property(dp, "myrinet-board-id", &len); - if (prop) - memcpy(&mp->eeprom.id[0], prop, 6); - else - set_boardid_from_idprom(mp, num); - - prop = of_get_property(dp, "fpga_version", &len); - if (prop) - memcpy(&mp->eeprom.fvers[0], prop, 32); - else - memset(&mp->eeprom.fvers[0], 0, 32); - - if (mp->eeprom.cpuvers == CPUVERS_4_1) { - if (mp->eeprom.ramsz == (128 * 1024)) - mp->eeprom.ramsz = (256 * 1024); - if ((mp->eeprom.cval == 0x40414041) || - (mp->eeprom.cval == 0x90449044)) - mp->eeprom.cval = 0x50e450e4; - } - } -#ifdef DEBUG_DETECT - dump_eeprom(mp); -#endif - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = mp->eeprom.id[i]; - - determine_reg_space_size(mp); - - /* Map in the MyriCOM register/localram set. */ - if (mp->eeprom.cpuvers < CPUVERS_4_0) { - /* XXX Makes no sense, if control reg is non-existent this - * XXX driver cannot function at all... maybe pre-4.0 is - * XXX only a valid version for PCI cards? Ask feldy... - */ - DET(("Mapping regs for cpuvers < CPUVERS_4_0\n")); - mp->regs = of_ioremap(&op->resource[0], 0, - mp->reg_size, "MyriCOM Regs"); - if (!mp->regs) { - printk("MyriCOM: Cannot map MyriCOM registers.\n"); - goto err; - } - mp->lanai = mp->regs + (256 * 1024); - mp->lregs = mp->lanai + (0x10000 * 2); - } else { - DET(("Mapping regs for cpuvers >= CPUVERS_4_0\n")); - mp->cregs = of_ioremap(&op->resource[0], 0, - PAGE_SIZE, "MyriCOM Control Regs"); - mp->lregs = of_ioremap(&op->resource[0], (256 * 1024), - PAGE_SIZE, "MyriCOM LANAI Regs"); - mp->lanai = of_ioremap(&op->resource[0], (512 * 1024), - mp->eeprom.ramsz, "MyriCOM SRAM"); - } - DET(("Registers mapped: cregs[%p] lregs[%p] lanai[%p]\n", - mp->cregs, mp->lregs, mp->lanai)); - - if (mp->eeprom.cpuvers >= CPUVERS_4_0) - mp->shmem_base = 0xf000; - else - mp->shmem_base = 0x8000; - - DET(("Shared memory base is %04x, ", mp->shmem_base)); - - mp->shmem = (struct myri_shmem __iomem *) - (mp->lanai + (mp->shmem_base * 2)); - DET(("shmem mapped at %p\n", mp->shmem)); - - mp->rqack = &mp->shmem->channel.recvqa; - mp->rq = &mp->shmem->channel.recvq; - mp->sq = &mp->shmem->channel.sendq; - - /* Reset the board. */ - DET(("Resetting LANAI\n")); - myri_reset_off(mp->lregs, mp->cregs); - myri_reset_on(mp->cregs); - - /* Turn IRQ's off. */ - myri_disable_irq(mp->lregs, mp->cregs); - - /* Reset once more. */ - myri_reset_on(mp->cregs); - - /* Get the supported DVMA burst sizes from our SBUS. */ - mp->myri_bursts = of_getintprop_default(dp->parent, - "burst-sizes", 0x00); - if (!sbus_can_burst64()) - mp->myri_bursts &= ~(DMA_BURST64); - - DET(("MYRI bursts %02x\n", mp->myri_bursts)); - - /* Encode SBUS interrupt level in second control register. */ - i = of_getintprop_default(dp, "interrupts", 0); - if (i == 0) - i = 4; - DET(("prom_getint(interrupts)==%d, irqlvl set to %04x\n", - i, (1 << i))); - - sbus_writel((1 << i), mp->cregs + MYRICTRL_IRQLVL); - - mp->dev = dev; - dev->watchdog_timeo = 5*HZ; - dev->irq = op->archdata.irqs[0]; - dev->netdev_ops = &myri_ops; - - /* Register interrupt handler now. */ - DET(("Requesting MYRIcom IRQ line.\n")); - if (request_irq(dev->irq, myri_interrupt, - IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) { - printk("MyriCOM: Cannot register interrupt handler.\n"); - goto err; - } - - dev->mtu = MYRINET_MTU; - dev->header_ops = &myri_header_ops; - - dev->hard_header_len = (ETH_HLEN + MYRI_PAD_LEN); - - /* Load code onto the LANai. */ - DET(("Loading LANAI firmware\n")); - if (myri_load_lanai(mp)) { - printk(KERN_ERR "MyriCOM: Cannot Load LANAI firmware.\n"); - goto err_free_irq; - } - - if (register_netdev(dev)) { - printk("MyriCOM: Cannot register device.\n"); - goto err_free_irq; - } - - dev_set_drvdata(&op->dev, mp); - - num++; - - printk("%s: MyriCOM MyriNET Ethernet %pM\n", - dev->name, dev->dev_addr); - - return 0; - -err_free_irq: - free_irq(dev->irq, dev); -err: - /* This will also free the co-allocated private data*/ - free_netdev(dev); - return -ENODEV; -} - -static int __devexit myri_sbus_remove(struct platform_device *op) -{ - struct myri_eth *mp = dev_get_drvdata(&op->dev); - struct net_device *net_dev = mp->dev; - - unregister_netdev(net_dev); - - free_irq(net_dev->irq, net_dev); - - if (mp->eeprom.cpuvers < CPUVERS_4_0) { - of_iounmap(&op->resource[0], mp->regs, mp->reg_size); - } else { - of_iounmap(&op->resource[0], mp->cregs, PAGE_SIZE); - of_iounmap(&op->resource[0], mp->lregs, (256 * 1024)); - of_iounmap(&op->resource[0], mp->lanai, (512 * 1024)); - } - - free_netdev(net_dev); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id myri_sbus_match[] = { - { - .name = "MYRICOM,mlanai", - }, - { - .name = "myri", - }, - {}, -}; - -MODULE_DEVICE_TABLE(of, myri_sbus_match); - -static struct platform_driver myri_sbus_driver = { - .driver = { - .name = "myri", - .owner = THIS_MODULE, - .of_match_table = myri_sbus_match, - }, - .probe = myri_sbus_probe, - .remove = __devexit_p(myri_sbus_remove), -}; - -static int __init myri_sbus_init(void) -{ - return platform_driver_register(&myri_sbus_driver); -} - -static void __exit myri_sbus_exit(void) -{ - platform_driver_unregister(&myri_sbus_driver); -} - -module_init(myri_sbus_init); -module_exit(myri_sbus_exit); - -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE(FWNAME); diff --git a/drivers/net/myri_sbus.h b/drivers/net/myri_sbus.h deleted file mode 100644 index 80a2fa5cf757..000000000000 --- a/drivers/net/myri_sbus.h +++ /dev/null @@ -1,311 +0,0 @@ -/* myri_sbus.h: Defines for MyriCOM MyriNET SBUS card driver. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _MYRI_SBUS_H -#define _MYRI_SBUS_H - -/* LANAI Registers */ -#define LANAI_IPF0 0x00UL /* Context zero state registers.*/ -#define LANAI_CUR0 0x04UL -#define LANAI_PREV0 0x08UL -#define LANAI_DATA0 0x0cUL -#define LANAI_DPF0 0x10UL -#define LANAI_IPF1 0x14UL /* Context one state registers. */ -#define LANAI_CUR1 0x18UL -#define LANAI_PREV1 0x1cUL -#define LANAI_DATA1 0x20UL -#define LANAI_DPF1 0x24UL -#define LANAI_ISTAT 0x28UL /* Interrupt status. */ -#define LANAI_EIMASK 0x2cUL /* External IRQ mask. */ -#define LANAI_ITIMER 0x30UL /* IRQ timer. */ -#define LANAI_RTC 0x34UL /* Real Time Clock */ -#define LANAI_CSUM 0x38UL /* Checksum. */ -#define LANAI_DMAXADDR 0x3cUL /* SBUS DMA external address. */ -#define LANAI_DMALADDR 0x40UL /* SBUS DMA local address. */ -#define LANAI_DMACTR 0x44UL /* SBUS DMA counter. */ -#define LANAI_RXDMAPTR 0x48UL /* Receive DMA pointer. */ -#define LANAI_RXDMALIM 0x4cUL /* Receive DMA limit. */ -#define LANAI_TXDMAPTR 0x50UL /* Transmit DMA pointer. */ -#define LANAI_TXDMALIM 0x54UL /* Transmit DMA limit. */ -#define LANAI_TXDMALIMT 0x58UL /* Transmit DMA limit w/tail. */ - /* 0x5cUL, reserved */ -#define LANAI_RBYTE 0x60UL /* Receive byte. */ - /* 0x64-->0x6c, reserved */ -#define LANAI_RHALF 0x70UL /* Receive half-word. */ - /* 0x72UL, reserved */ -#define LANAI_RWORD 0x74UL /* Receive word. */ -#define LANAI_SALIGN 0x78UL /* Send align. */ -#define LANAI_SBYTE 0x7cUL /* SingleSend send-byte. */ -#define LANAI_SHALF 0x80UL /* SingleSend send-halfword. */ -#define LANAI_SWORD 0x84UL /* SingleSend send-word. */ -#define LANAI_SSENDT 0x88UL /* SingleSend special. */ -#define LANAI_DMADIR 0x8cUL /* DMA direction. */ -#define LANAI_DMASTAT 0x90UL /* DMA status. */ -#define LANAI_TIMEO 0x94UL /* Timeout register. */ -#define LANAI_MYRINET 0x98UL /* XXX MAGIC myricom thing */ -#define LANAI_HWDEBUG 0x9cUL /* Hardware debugging reg. */ -#define LANAI_LEDS 0xa0UL /* LED control. */ -#define LANAI_VERS 0xa4UL /* Version register. */ -#define LANAI_LINKON 0xa8UL /* Link activation reg. */ - /* 0xac-->0x104, reserved */ -#define LANAI_CVAL 0x108UL /* Clock value register. */ -#define LANAI_REG_SIZE 0x10cUL - -/* Interrupt status bits. */ -#define ISTAT_DEBUG 0x80000000 -#define ISTAT_HOST 0x40000000 -#define ISTAT_LAN7 0x00800000 -#define ISTAT_LAN6 0x00400000 -#define ISTAT_LAN5 0x00200000 -#define ISTAT_LAN4 0x00100000 -#define ISTAT_LAN3 0x00080000 -#define ISTAT_LAN2 0x00040000 -#define ISTAT_LAN1 0x00020000 -#define ISTAT_LAN0 0x00010000 -#define ISTAT_WRDY 0x00008000 -#define ISTAT_HRDY 0x00004000 -#define ISTAT_SRDY 0x00002000 -#define ISTAT_LINK 0x00001000 -#define ISTAT_FRES 0x00000800 -#define ISTAT_NRES 0x00000800 -#define ISTAT_WAKE 0x00000400 -#define ISTAT_OB2 0x00000200 -#define ISTAT_OB1 0x00000100 -#define ISTAT_TAIL 0x00000080 -#define ISTAT_WDOG 0x00000040 -#define ISTAT_TIME 0x00000020 -#define ISTAT_DMA 0x00000010 -#define ISTAT_SEND 0x00000008 -#define ISTAT_BUF 0x00000004 -#define ISTAT_RECV 0x00000002 -#define ISTAT_BRDY 0x00000001 - -/* MYRI Registers */ -#define MYRI_RESETOFF 0x00UL -#define MYRI_RESETON 0x04UL -#define MYRI_IRQOFF 0x08UL -#define MYRI_IRQON 0x0cUL -#define MYRI_WAKEUPOFF 0x10UL -#define MYRI_WAKEUPON 0x14UL -#define MYRI_IRQREAD 0x18UL - /* 0x1c-->0x3ffc, reserved */ -#define MYRI_LOCALMEM 0x4000UL -#define MYRI_REG_SIZE 0x25000UL - -/* Shared memory interrupt mask. */ -#define SHMEM_IMASK_RX 0x00000002 -#define SHMEM_IMASK_TX 0x00000001 - -/* Just to make things readable. */ -#define KERNEL_CHANNEL 0 - -/* The size of this must be >= 129 bytes. */ -struct myri_eeprom { - unsigned int cval; - unsigned short cpuvers; - unsigned char id[6]; - unsigned int ramsz; - unsigned char fvers[32]; - unsigned char mvers[16]; - unsigned short dlval; - unsigned short brd_type; - unsigned short bus_type; - unsigned short prod_code; - unsigned int serial_num; - unsigned short _reserved[24]; - unsigned int _unused[2]; -}; - -/* EEPROM bus types, only SBUS is valid in this driver. */ -#define BUS_TYPE_SBUS 1 - -/* EEPROM CPU revisions. */ -#define CPUVERS_2_3 0x0203 -#define CPUVERS_3_0 0x0300 -#define CPUVERS_3_1 0x0301 -#define CPUVERS_3_2 0x0302 -#define CPUVERS_4_0 0x0400 -#define CPUVERS_4_1 0x0401 -#define CPUVERS_4_2 0x0402 -#define CPUVERS_5_0 0x0500 - -/* MYRI Control Registers */ -#define MYRICTRL_CTRL 0x00UL -#define MYRICTRL_IRQLVL 0x02UL -#define MYRICTRL_REG_SIZE 0x04UL - -/* Global control register defines. */ -#define CONTROL_ROFF 0x8000 /* Reset OFF. */ -#define CONTROL_RON 0x4000 /* Reset ON. */ -#define CONTROL_EIRQ 0x2000 /* Enable IRQ's. */ -#define CONTROL_DIRQ 0x1000 /* Disable IRQ's. */ -#define CONTROL_WON 0x0800 /* Wake-up ON. */ - -#define MYRI_SCATTER_ENTRIES 8 -#define MYRI_GATHER_ENTRIES 16 - -struct myri_sglist { - u32 addr; - u32 len; -}; - -struct myri_rxd { - struct myri_sglist myri_scatters[MYRI_SCATTER_ENTRIES]; /* DMA scatter list.*/ - u32 csum; /* HW computed checksum. */ - u32 ctx; - u32 num_sg; /* Total scatter entries. */ -}; - -struct myri_txd { - struct myri_sglist myri_gathers[MYRI_GATHER_ENTRIES]; /* DMA scatter list. */ - u32 num_sg; /* Total scatter entries. */ - u16 addr[4]; /* XXX address */ - u32 chan; - u32 len; /* Total length of packet. */ - u32 csum_off; /* Where data to csum is. */ - u32 csum_field; /* Where csum goes in pkt. */ -}; - -#define MYRINET_MTU 8432 -#define RX_ALLOC_SIZE 8448 -#define MYRI_PAD_LEN 2 -#define RX_COPY_THRESHOLD 256 - -/* These numbers are cast in stone, new firmware is needed if - * you want to change them. - */ -#define TX_RING_MAXSIZE 16 -#define RX_RING_MAXSIZE 16 - -#define TX_RING_SIZE 16 -#define RX_RING_SIZE 16 - -/* GRRR... */ -static __inline__ int NEXT_RX(int num) -{ - /* XXX >=??? */ - if(++num > RX_RING_SIZE) - num = 0; - return num; -} - -static __inline__ int PREV_RX(int num) -{ - if(--num < 0) - num = RX_RING_SIZE; - return num; -} - -#define NEXT_TX(num) (((num) + 1) & (TX_RING_SIZE - 1)) -#define PREV_TX(num) (((num) - 1) & (TX_RING_SIZE - 1)) - -#define TX_BUFFS_AVAIL(head, tail) \ - ((head) <= (tail) ? \ - (head) + (TX_RING_SIZE - 1) - (tail) : \ - (head) - (tail) - 1) - -struct sendq { - u32 tail; - u32 head; - u32 hdebug; - u32 mdebug; - struct myri_txd myri_txd[TX_RING_MAXSIZE]; -}; - -struct recvq { - u32 head; - u32 tail; - u32 hdebug; - u32 mdebug; - struct myri_rxd myri_rxd[RX_RING_MAXSIZE + 1]; -}; - -#define MYRI_MLIST_SIZE 8 - -struct mclist { - u32 maxlen; - u32 len; - u32 cache; - struct pair { - u8 addr[8]; - u32 val; - } mc_pairs[MYRI_MLIST_SIZE]; - u8 bcast_addr[8]; -}; - -struct myri_channel { - u32 state; /* State of the channel. */ - u32 busy; /* Channel is busy. */ - struct sendq sendq; /* Device tx queue. */ - struct recvq recvq; /* Device rx queue. */ - struct recvq recvqa; /* Device rx queue acked. */ - u32 rbytes; /* Receive bytes. */ - u32 sbytes; /* Send bytes. */ - u32 rmsgs; /* Receive messages. */ - u32 smsgs; /* Send messages. */ - struct mclist mclist; /* Device multicast list. */ -}; - -/* Values for per-channel state. */ -#define STATE_WFH 0 /* Waiting for HOST. */ -#define STATE_WFN 1 /* Waiting for NET. */ -#define STATE_READY 2 /* Ready. */ - -struct myri_shmem { - u8 addr[8]; /* Board's address. */ - u32 nchan; /* Number of channels. */ - u32 burst; /* SBUS dma burst enable. */ - u32 shakedown; /* DarkkkkStarrr Crashesss... */ - u32 send; /* Send wanted. */ - u32 imask; /* Interrupt enable mask. */ - u32 mlevel; /* Map level. */ - u32 debug[4]; /* Misc. debug areas. */ - struct myri_channel channel; /* Only one channel on a host. */ -}; - -struct myri_eth { - /* These are frequently accessed, keep together - * to obtain good cache hit rates. - */ - spinlock_t irq_lock; - struct myri_shmem __iomem *shmem; /* Shared data structures. */ - void __iomem *cregs; /* Control register space. */ - struct recvq __iomem *rqack; /* Where we ack rx's. */ - struct recvq __iomem *rq; /* Where we put buffers. */ - struct sendq __iomem *sq; /* Where we stuff tx's. */ - struct net_device *dev; /* Linux/NET dev struct. */ - int tx_old; /* To speed up tx cleaning. */ - void __iomem *lregs; /* Quick ptr to LANAI regs. */ - struct sk_buff *rx_skbs[RX_RING_SIZE+1];/* RX skb's */ - struct sk_buff *tx_skbs[TX_RING_SIZE]; /* TX skb's */ - - /* These are less frequently accessed. */ - void __iomem *regs; /* MyriCOM register space. */ - void __iomem *lanai; /* View 2 of register space. */ - unsigned int myri_bursts; /* SBUS bursts. */ - struct myri_eeprom eeprom; /* Local copy of EEPROM. */ - unsigned int reg_size; /* Size of register space. */ - unsigned int shmem_base; /* Offset to shared ram. */ - struct platform_device *myri_op; /* Our OF device struct. */ -}; - -/* We use this to acquire receive skb's that we can DMA directly into. */ -#define ALIGNED_RX_SKB_ADDR(addr) \ - ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr)) -static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags) -{ - struct sk_buff *skb; - - skb = alloc_skb(length + 64, gfp_flags); - if(skb) { - int offset = ALIGNED_RX_SKB_ADDR(skb->data); - - if(offset) - skb_reserve(skb, offset); - } - return skb; -} - -#endif /* !(_MYRI_SBUS_H) */ -- cgit v1.2.3