From 07f9e5cf8e4154ad17b92ad288be0f04fa0cb94f Mon Sep 17 00:00:00 2001
From: Denis Carikli <denis@eukrea.com>
Date: Tue, 19 Nov 2013 11:56:04 -0800
Subject: Input: tsc2007 - add device tree support.

Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/tsc2007.txt         |  41 +++++
 arch/arm/mach-imx/mach-cpuimx35.c                  |   2 +-
 arch/arm/mach-imx/mach-cpuimx51sd.c                |   2 +-
 arch/sh/boards/mach-ecovec24/setup.c               |   2 +-
 drivers/input/touchscreen/tsc2007.c                | 173 ++++++++++++++++-----
 include/linux/i2c/tsc2007.h                        |   6 +-
 6 files changed, 180 insertions(+), 46 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
new file mode 100644
index 000000000000..ec365e172236
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
@@ -0,0 +1,41 @@
+* Texas Instruments tsc2007 touchscreen controller
+
+Required properties:
+- compatible: must be "ti,tsc2007".
+- reg: I2C address of the chip.
+- ti,x-plate-ohms: X-plate resistance in ohms.
+
+Optional properties:
+- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
+  The penirq pin goes to low when the panel is touched.
+  (see GPIO binding[1] for more details).
+- interrupt-parent: the phandle for the gpio controller
+  (see interrupt binding[0]).
+- interrupts: (gpio) interrupt to which the chip is connected
+  (see interrupt binding[0]).
+- ti,max-rt: maximum pressure.
+- ti,fuzzx: specifies the absolute input fuzz x value.
+  If set, it will permit noise in the data up to +- the value given to the fuzz
+  parameter, that is used to filter noise from the event stream.
+- ti,fuzzy: specifies the absolute input fuzz y value.
+- ti,fuzzz: specifies the absolute input fuzz z value.
+- ti,poll-period: how much time to wait (in milliseconds) before reading again the
+  values from the tsc2007.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+		tsc2007@49 {
+			compatible = "ti,tsc2007";
+			reg = <0x49>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 0x8>;
+			gpios = <&gpio4 0 0>;
+			ti,x-plate-ohms = <180>;
+		};
+
+		/* ... */
+	};
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 771362d1fbee..65e4c53e1554 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -53,7 +53,7 @@ static const struct imxi2c_platform_data
 };
 
 #define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
-static int tsc2007_get_pendown_state(void)
+static int tsc2007_get_pendown_state(struct device *dev)
 {
 	return !gpio_get_value(TSC2007_IRQGPIO);
 }
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index 9b5ddf5bbd33..1fba2b8e983f 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -121,7 +121,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int tsc2007_get_pendown_state(void)
+static int tsc2007_get_pendown_state(struct device *dev)
 {
 	if (mx51_revision() < IMX_CHIP_REVISION_3_0)
 		return !gpio_get_value(TSC2007_IRQGPIO_REV2);
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 1fa8be409771..23d7e45f9d14 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -501,7 +501,7 @@ static struct platform_device keysc_device = {
 /* TouchScreen */
 #define IRQ0 evt2irq(0x600)
 
-static int ts_get_pendown_state(void)
+static int ts_get_pendown_state(struct device *dev)
 {
 	int val = 0;
 	gpio_free(GPIO_FN_INTC_IRQ0);
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 0b67ba476b4c..88b150a0b8ee 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -26,6 +26,9 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 #define TSC2007_MEASURE_TEMP0		(0x0 << 4)
 #define TSC2007_MEASURE_AUX		(0x2 << 4)
@@ -74,13 +77,17 @@ struct tsc2007 {
 	u16			max_rt;
 	unsigned long		poll_delay;
 	unsigned long		poll_period;
+	int			fuzzx;
+	int			fuzzy;
+	int			fuzzz;
 
+	unsigned		gpio;
 	int			irq;
 
 	wait_queue_head_t	wait;
 	bool			stopped;
 
-	int			(*get_pendown_state)(void);
+	int			(*get_pendown_state)(struct device *);
 	void			(*clear_penirq)(void);
 };
 
@@ -161,7 +168,7 @@ static bool tsc2007_is_pen_down(struct tsc2007 *ts)
 	if (!ts->get_pendown_state)
 		return true;
 
-	return ts->get_pendown_state();
+	return ts->get_pendown_state(&ts->client->dev);
 }
 
 static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
@@ -178,7 +185,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 
 		rt = tsc2007_calculate_pressure(ts, &tc);
 
-		if (rt == 0 && !ts->get_pendown_state) {
+		if (!rt && !ts->get_pendown_state) {
 			/*
 			 * If pressure reported is 0 and we don't have
 			 * callback to check pendown state, we have to
@@ -228,7 +235,7 @@ static irqreturn_t tsc2007_hard_irq(int irq, void *handle)
 {
 	struct tsc2007 *ts = handle;
 
-	if (!ts->get_pendown_state || likely(ts->get_pendown_state()))
+	if (tsc2007_is_pen_down(ts))
 		return IRQ_WAKE_THREAD;
 
 	if (ts->clear_penirq)
@@ -273,35 +280,74 @@ static void tsc2007_close(struct input_dev *input_dev)
 	tsc2007_stop(ts);
 }
 
-static int tsc2007_probe(struct i2c_client *client,
-				   const struct i2c_device_id *id)
+#ifdef CONFIG_OF
+static int tsc2007_get_pendown_state_gpio(struct device *dev)
 {
-	struct tsc2007 *ts;
-	struct tsc2007_platform_data *pdata = client->dev.platform_data;
-	struct input_dev *input_dev;
-	int err;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsc2007 *ts = i2c_get_clientdata(client);
+
+	return !gpio_get_value(ts->gpio);
+}
+
+static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
+{
+	struct device_node *np = client->dev.of_node;
+	u32 val32;
+	u64 val64;
 
-	if (!pdata) {
-		dev_err(&client->dev, "platform data is required!\n");
+	if (!np) {
+		dev_err(&client->dev, "missing device tree data\n");
 		return -EINVAL;
 	}
 
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_WORD_DATA))
-		return -EIO;
+	if (!of_property_read_u32(np, "ti,max-rt", &val32))
+		ts->max_rt = val32;
+	else
+		ts->max_rt = MAX_12BIT;
 
-	ts = kzalloc(sizeof(struct tsc2007), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts || !input_dev) {
-		err = -ENOMEM;
-		goto err_free_mem;
+	if (!of_property_read_u32(np, "ti,fuzzx", &val32))
+		ts->fuzzx = val32;
+
+	if (!of_property_read_u32(np, "ti,fuzzy", &val32))
+		ts->fuzzy = val32;
+
+	if (!of_property_read_u32(np, "ti,fuzzz", &val32))
+		ts->fuzzz = val32;
+
+	if (!of_property_read_u64(np, "ti,poll-period", &val64))
+		ts->poll_period = val64;
+	else
+		ts->poll_period = 1;
+
+	if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
+		ts->x_plate_ohms = val32;
+	} else {
+		dev_err(&client->dev, "missing ti,x-plate-ohms devicetree property.");
+		return -EINVAL;
 	}
 
-	ts->client = client;
-	ts->irq = client->irq;
-	ts->input = input_dev;
-	init_waitqueue_head(&ts->wait);
+	ts->gpio = of_get_gpio(np, 0);
+	if (gpio_is_valid(ts->gpio))
+		ts->get_pendown_state = tsc2007_get_pendown_state_gpio;
+	else
+		dev_warn(&client->dev,
+			 "GPIO not specified in DT (of_get_gpio returned %d)\n",
+			 ts->gpio);
 
+	return 0;
+}
+#else
+static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
+{
+	dev_err(&client->dev, "platform data is required!\n");
+	return -EINVAL;
+}
+#endif
+
+static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
+			      const struct tsc2007_platform_data *pdata,
+			      const struct i2c_device_id *id)
+{
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
 	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
@@ -309,13 +355,54 @@ static int tsc2007_probe(struct i2c_client *client,
 	ts->poll_period       = pdata->poll_period ? : 1;
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
+	ts->fuzzx             = pdata->fuzzx;
+	ts->fuzzy             = pdata->fuzzy;
+	ts->fuzzz             = pdata->fuzzz;
 
 	if (pdata->x_plate_ohms == 0) {
 		dev_err(&client->dev, "x_plate_ohms is not set up in platform data");
-		err = -EINVAL;
-		goto err_free_mem;
+		return -EINVAL;
 	}
 
+	return 0;
+}
+
+static int tsc2007_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct tsc2007 *ts;
+	struct input_dev *input_dev;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -EIO;
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct tsc2007), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	if (pdata)
+		err = tsc2007_probe_pdev(client, ts, pdata, id);
+	else
+		err = tsc2007_probe_dt(client, ts);
+	if (err)
+		return err;
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		err = -ENOMEM;
+		goto err_free_input;
+	};
+
+	i2c_set_clientdata(client, ts);
+
+	ts->client = client;
+	ts->irq = client->irq;
+	ts->input = input_dev;
+	init_waitqueue_head(&ts->wait);
+
 	snprintf(ts->phys, sizeof(ts->phys),
 		 "%s/input0", dev_name(&client->dev));
 
@@ -331,19 +418,19 @@ static int tsc2007_probe(struct i2c_client *client,
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
-	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, pdata->fuzzx, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, pdata->fuzzy, 0);
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT,
-			pdata->fuzzz, 0);
+			     ts->fuzzz, 0);
 
-	if (pdata->init_platform_hw)
+	if (pdata && pdata->init_platform_hw)
 		pdata->init_platform_hw();
 
 	err = request_threaded_irq(ts->irq, tsc2007_hard_irq, tsc2007_soft_irq,
 				   IRQF_ONESHOT, client->dev.driver->name, ts);
 	if (err < 0) {
 		dev_err(&client->dev, "irq %d busy?\n", ts->irq);
-		goto err_free_mem;
+		goto err_free_input;
 	}
 
 	tsc2007_stop(ts);
@@ -352,28 +439,25 @@ static int tsc2007_probe(struct i2c_client *client,
 	if (err)
 		goto err_free_irq;
 
-	i2c_set_clientdata(client, ts);
-
 	return 0;
 
  err_free_irq:
 	free_irq(ts->irq, ts);
-	if (pdata->exit_platform_hw)
+	if (pdata && pdata->exit_platform_hw)
 		pdata->exit_platform_hw();
- err_free_mem:
+ err_free_input:
 	input_free_device(input_dev);
-	kfree(ts);
 	return err;
 }
 
 static int tsc2007_remove(struct i2c_client *client)
 {
-	struct tsc2007	*ts = i2c_get_clientdata(client);
-	struct tsc2007_platform_data *pdata = client->dev.platform_data;
+	const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct tsc2007 *ts = i2c_get_clientdata(client);
 
 	free_irq(ts->irq, ts);
 
-	if (pdata->exit_platform_hw)
+	if (pdata && pdata->exit_platform_hw)
 		pdata->exit_platform_hw();
 
 	input_unregister_device(ts->input);
@@ -389,10 +473,19 @@ static const struct i2c_device_id tsc2007_idtable[] = {
 
 MODULE_DEVICE_TABLE(i2c, tsc2007_idtable);
 
+#ifdef CONFIG_OF
+static const struct of_device_id tsc2007_of_match[] = {
+	{ .compatible = "ti,tsc2007" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tsc2007_of_match);
+#endif
+
 static struct i2c_driver tsc2007_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
-		.name	= "tsc2007"
+		.name	= "tsc2007",
+		.of_match_table = of_match_ptr(tsc2007_of_match),
 	},
 	.id_table	= tsc2007_idtable,
 	.probe		= tsc2007_probe,
diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h
index 506a9f7af51e..041c8e823664 100644
--- a/include/linux/i2c/tsc2007.h
+++ b/include/linux/i2c/tsc2007.h
@@ -14,9 +14,9 @@ struct tsc2007_platform_data {
 	int	fuzzy;
 	int	fuzzz;
 
-	int	(*get_pendown_state)(void);
-	void	(*clear_penirq)(void);		/* If needed, clear 2nd level
-						   interrupt source */
+	int	(*get_pendown_state)(struct device *);
+	/* If needed, clear 2nd level interrupt source */
+	void	(*clear_penirq)(void);
 	int	(*init_platform_hw)(void);
 	void	(*exit_platform_hw)(void);
 };
-- 
cgit v1.2.3


From f261d46551275abc9e92b24773b15fbb82153b63 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue, 19 Nov 2013 12:51:26 -0800
Subject: Input: tsc2007 - remove unused poll_delay from platform data

The driver does not use poll_delay parameter, so let's remove it.

Tested-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/tsc2007.c | 2 --
 include/linux/i2c/tsc2007.h         | 2 --
 2 files changed, 4 deletions(-)

diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 88b150a0b8ee..03fbdf1e8613 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -75,7 +75,6 @@ struct tsc2007 {
 	u16			model;
 	u16			x_plate_ohms;
 	u16			max_rt;
-	unsigned long		poll_delay;
 	unsigned long		poll_period;
 	int			fuzzx;
 	int			fuzzy;
@@ -351,7 +350,6 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
 	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
-	ts->poll_delay        = pdata->poll_delay ? : 1;
 	ts->poll_period       = pdata->poll_period ? : 1;
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h
index 041c8e823664..4f35b6ad3889 100644
--- a/include/linux/i2c/tsc2007.h
+++ b/include/linux/i2c/tsc2007.h
@@ -7,8 +7,6 @@ struct tsc2007_platform_data {
 	u16	model;				/* 2007. */
 	u16	x_plate_ohms;	/* must be non-zero value */
 	u16	max_rt; /* max. resistance above which samples are ignored */
-	unsigned long poll_delay; /* delay (in ms) after pen-down event
-				     before polling starts */
 	unsigned long poll_period; /* time (in ms) between samples */
 	int	fuzzx; /* fuzz factor for X, Y and pressure axes */
 	int	fuzzy;
-- 
cgit v1.2.3


From fd91a5f01373ebf672a6691f4dcd487af48be945 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue, 19 Nov 2013 12:52:29 -0800
Subject: Input: tsc2007 - convert to use devres-managed resources

This simplifies error handling path and allows us get rid of
tsc2007_remove().

Tested-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/tsc2007.c | 79 +++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 39 deletions(-)

diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 03fbdf1e8613..1bf9906b5a3f 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -365,6 +365,14 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
 	return 0;
 }
 
+static void tsc2007_call_exit_platform_hw(void *data)
+{
+	struct device *dev = data;
+	const struct tsc2007_platform_data *pdata = dev_get_platdata(dev);
+
+	pdata->exit_platform_hw();
+}
+
 static int tsc2007_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -388,11 +396,9 @@ static int tsc2007_probe(struct i2c_client *client,
 	if (err)
 		return err;
 
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		err = -ENOMEM;
-		goto err_free_input;
-	};
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	i2c_set_clientdata(client, ts);
 
@@ -421,45 +427,41 @@ static int tsc2007_probe(struct i2c_client *client,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT,
 			     ts->fuzzz, 0);
 
-	if (pdata && pdata->init_platform_hw)
-		pdata->init_platform_hw();
+	if (pdata) {
+		if (pdata->exit_platform_hw) {
+			err = devm_add_action(&client->dev,
+					      tsc2007_call_exit_platform_hw,
+					      &client->dev);
+			if (err) {
+				dev_err(&client->dev,
+					"Failed to register exit_platform_hw action, %d\n",
+					err);
+				return err;
+			}
+		}
+
+		if (pdata->init_platform_hw)
+			pdata->init_platform_hw();
+	}
 
-	err = request_threaded_irq(ts->irq, tsc2007_hard_irq, tsc2007_soft_irq,
-				   IRQF_ONESHOT, client->dev.driver->name, ts);
-	if (err < 0) {
-		dev_err(&client->dev, "irq %d busy?\n", ts->irq);
-		goto err_free_input;
+	err = devm_request_threaded_irq(&client->dev, ts->irq,
+					tsc2007_hard_irq, tsc2007_soft_irq,
+					IRQF_ONESHOT,
+					client->dev.driver->name, ts);
+	if (err) {
+		dev_err(&client->dev, "Failed to request irq %d: %d\n",
+			ts->irq, err);
+		return err;
 	}
 
 	tsc2007_stop(ts);
 
 	err = input_register_device(input_dev);
-	if (err)
-		goto err_free_irq;
-
-	return 0;
-
- err_free_irq:
-	free_irq(ts->irq, ts);
-	if (pdata && pdata->exit_platform_hw)
-		pdata->exit_platform_hw();
- err_free_input:
-	input_free_device(input_dev);
-	return err;
-}
-
-static int tsc2007_remove(struct i2c_client *client)
-{
-	const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
-	struct tsc2007 *ts = i2c_get_clientdata(client);
-
-	free_irq(ts->irq, ts);
-
-	if (pdata && pdata->exit_platform_hw)
-		pdata->exit_platform_hw();
-
-	input_unregister_device(ts->input);
-	kfree(ts);
+	if (err) {
+		dev_err(&client->dev,
+			"Failed to register input device: %d\n", err);
+		return err;
+	}
 
 	return 0;
 }
@@ -487,7 +489,6 @@ static struct i2c_driver tsc2007_driver = {
 	},
 	.id_table	= tsc2007_idtable,
 	.probe		= tsc2007_probe,
-	.remove		= tsc2007_remove,
 };
 
 module_i2c_driver(tsc2007_driver);
-- 
cgit v1.2.3


From c81e592696bbe1224506087eae8b4e02cd7186c3 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Tue, 19 Nov 2013 13:55:12 -0800
Subject: Input: twl4030-pwrbutton - add device tree support

Add device tree support for twl4030 power button driver.

Adding device tree support involved converting the
driver to module_platform_driver().

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Kumar Gala <galak@codeaurora.org>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/twl4030-pwrbutton.txt | 21 +++++++++++++++++++++
 drivers/input/misc/twl4030-pwrbutton.c              | 16 ++++++++++++----
 2 files changed, 33 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt

diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
new file mode 100644
index 000000000000..c864a46cddcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
@@ -0,0 +1,21 @@
+Texas Instruments TWL family (twl4030) pwrbutton module
+
+This module is part of the TWL4030. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+- interrupts: should be one of the following
+   - <8>: For controllers compatible with twl4030
+
+Example:
+
+&twl {
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
+};
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index b9a05fda03e4..412ef0ecb439 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
 	return IRQ_HANDLED;
 }
 
-static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 {
 	struct input_dev *pwr;
 	int irq = platform_get_irq(pdev, 0);
@@ -106,16 +106,24 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
+       { .compatible = "ti,twl4030-pwrbutton" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
+#endif
+
 static struct platform_driver twl4030_pwrbutton_driver = {
+	.probe		= twl4030_pwrbutton_probe,
 	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
 	},
 };
-
-module_platform_driver_probe(twl4030_pwrbutton_driver,
-			twl4030_pwrbutton_probe);
+module_platform_driver(twl4030_pwrbutton_driver);
 
 MODULE_ALIAS("platform:twl4030_pwrbutton");
 MODULE_DESCRIPTION("Triton2 Power Button");
-- 
cgit v1.2.3


From 0330f93a7fac5e3e91b1fe2d85f5a6b63f9e9857 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Tue, 19 Nov 2013 13:53:31 -0800
Subject: Input: twl4030-pwrbutton - use dev_err for errors

Use dev_err() to output errors instead of dev_dbg().

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/twl4030-pwrbutton.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index 412ef0ecb439..88522d003ffe 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -60,7 +60,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 
 	pwr = input_allocate_device();
 	if (!pwr) {
-		dev_dbg(&pdev->dev, "Can't allocate power button\n");
+		dev_err(&pdev->dev, "Can't allocate power button\n");
 		return -ENOMEM;
 	}
 
@@ -74,13 +74,13 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"twl4030_pwrbutton", pwr);
 	if (err < 0) {
-		dev_dbg(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
 		goto free_input_dev;
 	}
 
 	err = input_register_device(pwr);
 	if (err) {
-		dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
+		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
 		goto free_irq;
 	}
 
-- 
cgit v1.2.3


From 7f9ce649d2675103bbb71fe2c2bb4cd7fb362c37 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Tue, 19 Nov 2013 13:56:18 -0800
Subject: Input: twl4030-pwrbutton - simplify driver using devm_*

Use managed irq resource to simplify the driver.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/twl4030-pwrbutton.c | 26 ++++----------------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index 88522d003ffe..fb3b63b2f85c 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -58,7 +58,7 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	int irq = platform_get_irq(pdev, 0);
 	int err;
 
-	pwr = input_allocate_device();
+	pwr = devm_input_allocate_device(&pdev->dev);
 	if (!pwr) {
 		dev_err(&pdev->dev, "Can't allocate power button\n");
 		return -ENOMEM;
@@ -70,39 +70,22 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	pwr->phys = "twl4030_pwrbutton/input0";
 	pwr->dev.parent = &pdev->dev;
 
-	err = request_threaded_irq(irq, NULL, powerbutton_irq,
+	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"twl4030_pwrbutton", pwr);
 	if (err < 0) {
 		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
-		goto free_input_dev;
+		return err;
 	}
 
 	err = input_register_device(pwr);
 	if (err) {
 		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
-		goto free_irq;
+		return err;
 	}
 
 	platform_set_drvdata(pdev, pwr);
 
-	return 0;
-
-free_irq:
-	free_irq(irq, pwr);
-free_input_dev:
-	input_free_device(pwr);
-	return err;
-}
-
-static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
-{
-	struct input_dev *pwr = platform_get_drvdata(pdev);
-	int irq = platform_get_irq(pdev, 0);
-
-	free_irq(irq, pwr);
-	input_unregister_device(pwr);
-
 	return 0;
 }
 
@@ -116,7 +99,6 @@ MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
 
 static struct platform_driver twl4030_pwrbutton_driver = {
 	.probe		= twl4030_pwrbutton_probe,
-	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
-- 
cgit v1.2.3


From d0134e9fcfa393f64b4b406a6aac90d9b929a704 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Mon, 25 Nov 2013 18:11:15 -0800
Subject: Input: serio - remove unnecessary pci_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/serio/pcips2.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 76f83836fd5a..13062f667e82 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -181,7 +181,6 @@ static void pcips2_remove(struct pci_dev *dev)
 	struct pcips2_data *ps2if = pci_get_drvdata(dev);
 
 	serio_unregister_port(ps2if->io);
-	pci_set_drvdata(dev, NULL);
 	kfree(ps2if);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-- 
cgit v1.2.3


From 0b279da7af779fa515b70c0f4127001cab22ea86 Mon Sep 17 00:00:00 2001
From: Jason Gerecke <killertofu@gmail.com>
Date: Mon, 25 Nov 2013 18:43:16 -0800
Subject: Input: wacom - scale up touch width and height values for Intuos Pro

The width and height values reported by the Intuos Pro are not in
surface units as required by the MT protocol. A simple multiplier
of 100x corrects it.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/tablet/wacom_wac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 9c8eded2e504..3f75f1d3b348 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1151,8 +1151,8 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
 		int width, height;
 
 		if (features->type >= INTUOSPS && features->type <= INTUOSPL) {
-			width  = data[5];
-			height = data[6];
+			width  = data[5] * 100;
+			height = data[6] * 100;
 		} else {
 			/*
 			 * "a" is a scaled-down area which we assume is
-- 
cgit v1.2.3


From 1d0d6df02750b4a6f466768cbfbf860e24f4c8d4 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Mon, 25 Nov 2013 18:43:45 -0800
Subject: Input: wacom - make sure touch_max is set for touch devices

Old single touch Tablet PCs do not have touch_max set at
wacom_features. Since touch device at lease supports one
finger, assign touch_max to 1 when touch usage is defined
in its HID Descriptor and touch_max is not pre-defined.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/tablet/wacom_sys.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 8a90da11365f..3d71b608330e 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -304,7 +304,7 @@ static int wacom_parse_hid(struct usb_interface *intf,
 	struct usb_device *dev = interface_to_usbdev(intf);
 	char limit = 0;
 	/* result has to be defined as int for some devices */
-	int result = 0;
+	int result = 0, touch_max = 0;
 	int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
 	unsigned char *report;
 
@@ -351,7 +351,8 @@ static int wacom_parse_hid(struct usb_interface *intf,
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
 						features->device_type = BTN_TOOL_FINGER;
-
+						/* touch device at least supports one touch point */
+						touch_max = 1;
 						switch (features->type) {
 						case TABLETPC2FG:
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
@@ -504,6 +505,8 @@ static int wacom_parse_hid(struct usb_interface *intf,
 	}
 
  out:
+	if (!features->touch_max && touch_max)
+		features->touch_max = touch_max;
 	result = 0;
 	kfree(report);
 	return result;
-- 
cgit v1.2.3


From b5fd2a3e92ca5c8c1f3c20d31ac5daed3ec4d604 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Mon, 25 Nov 2013 18:44:55 -0800
Subject: Input: wacom - add support for three new Intuos devices

Two tablets in this series support both pen and touch. One (Intuos S)
only supports pen. This patch also updates the driver to process wireless
devices that do not support touch interface.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/tablet/wacom_sys.c |  6 ++--
 drivers/input/tablet/wacom_wac.c | 61 ++++++++++++++++++++++++++++++----------
 drivers/input/tablet/wacom_wac.h |  2 ++
 3 files changed, 51 insertions(+), 18 deletions(-)

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 3d71b608330e..3a7d99c720cd 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1198,7 +1198,8 @@ static void wacom_wireless_work(struct work_struct *work)
 			goto fail;
 
 		/* Touch interface */
-		if (wacom_wac1->features.touch_max) {
+		if (wacom_wac1->features.touch_max ||
+		    wacom_wac1->features.type == INTUOSHT) {
 			wacom_wac2->features =
 				*((struct wacom_features *)id->driver_info);
 			wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
@@ -1321,7 +1322,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	 * HID descriptor. If this is the touch interface (wMaxPacketSize
 	 * of WACOM_PKGLEN_BBTOUCH3), override the table values.
 	 */
-	if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
+	if (features->type >= INTUOS5S && features->type <= INTUOSHT) {
 		if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
 			features->device_type = BTN_TOOL_FINGER;
 			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
@@ -1391,7 +1392,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			goto fail5;
 		}
 	}
-
 	return 0;
 
  fail5: wacom_destroy_leds(wacom);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 3f75f1d3b348..eb60a284be05 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1176,10 +1176,16 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
 static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
 {
 	struct input_dev *input = wacom->input;
+	struct wacom_features *features = &wacom->features;
 
-	input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+	if (features->type == INTUOSHT) {
+		input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
+		input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
+	} else {
+		input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
+		input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+	}
 	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
-	input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
 	input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
 }
 
@@ -1217,7 +1223,7 @@ static int wacom_bpt_pen(struct wacom_wac *wacom)
 	unsigned char *data = wacom->data;
 	int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
 
-	if (data[0] != 0x02)
+	if (data[0] != WACOM_REPORT_PENABLED)
 	    return 0;
 
 	prox = (data[1] & 0x20) == 0x20;
@@ -1297,7 +1303,7 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
 	unsigned char *data = wacom->data;
 	int connected;
 
-	if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
+	if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL)
 		return 0;
 
 	connected = data[1] & 0x01;
@@ -1391,6 +1397,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		break;
 
 	case BAMBOO_PT:
+	case INTUOSHT:
 		sync = wacom_bpt_irq(wacom_wac, len);
 		break;
 
@@ -1459,7 +1466,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* these device have multiple inputs */
 	if (features->type >= WIRELESS ||
-	    (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
+	    (features->type >= INTUOS5S && features->type <= INTUOSHT) ||
 	    (features->oVid && features->oPid))
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
@@ -1771,33 +1778,43 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;
 
+	case INTUOSHT:
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-
 		if (features->device_type == BTN_TOOL_FINGER) {
-			unsigned int flags = INPUT_MT_POINTER;
 
 			__set_bit(BTN_LEFT, input_dev->keybit);
 			__set_bit(BTN_FORWARD, input_dev->keybit);
 			__set_bit(BTN_BACK, input_dev->keybit);
 			__set_bit(BTN_RIGHT, input_dev->keybit);
 
-			if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
-				input_set_abs_params(input_dev,
+			if (features->touch_max) {
+				/* touch interface */
+				unsigned int flags = INPUT_MT_POINTER;
+
+				__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+				if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
+					input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
 						     0, features->x_max, 0, 0);
-				input_set_abs_params(input_dev,
+					input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MINOR,
 						     0, features->y_max, 0, 0);
+				} else {
+					__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+					__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+					flags = 0;
+				}
+				input_mt_init_slots(input_dev, features->touch_max, flags);
 			} else {
-				__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-				__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-				flags = 0;
+				/* buttons/keys only interface */
+				__clear_bit(ABS_X, input_dev->absbit);
+				__clear_bit(ABS_Y, input_dev->absbit);
+				__clear_bit(BTN_TOUCH, input_dev->keybit);
 			}
-			input_mt_init_slots(input_dev, features->touch_max, flags);
 		} else if (features->device_type == BTN_TOOL_PEN) {
+			__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
 			__set_bit(BTN_STYLUS, input_dev->keybit);
@@ -2194,6 +2211,17 @@ static const struct wacom_features wacom_features_0x300 =
 static const struct wacom_features wacom_features_0x301 =
 	{ "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x302 =
+	{ "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
+	  31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x303 =
+	{ "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
+	  31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x30E =
+	{ "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
+	  31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x6004 =
 	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2329,6 +2357,9 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x10D) },
 	{ USB_DEVICE_WACOM(0x300) },
 	{ USB_DEVICE_WACOM(0x301) },
+	{ USB_DEVICE_DETAILED(0x302, USB_CLASS_HID, 0, 0) },
+	{ USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
+	{ USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_WACOM(0x304) },
 	{ USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index fd23a3790605..854cceb6d6de 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -54,6 +54,7 @@
 #define WACOM_REPORT_TPCST		16
 #define WACOM_REPORT_TPC1FGE		18
 #define WACOM_REPORT_24HDT		1
+#define WACOM_REPORT_WL			128
 
 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
@@ -81,6 +82,7 @@ enum {
 	INTUOSPS,
 	INTUOSPM,
 	INTUOSPL,
+	INTUOSHT,
 	WACOM_21UX2,
 	WACOM_22HD,
 	DTK,
-- 
cgit v1.2.3


From 976358e2343566207fed2101ce62ff6fbad7f830 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Mon, 25 Nov 2013 19:17:09 -0800
Subject: Input: add a new driver for GPIO beeper

This patch adds a new driver for the beeper controlled via GPIO pin.
The driver does not depend on the architecture and is positioned as
a replacement for the specific drivers that are used for this function.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/gpio-beeper.txt      |  13 +++
 drivers/input/misc/Kconfig                         |   9 ++
 drivers/input/misc/Makefile                        |   1 +
 drivers/input/misc/gpio-beeper.c                   | 127 +++++++++++++++++++++
 4 files changed, 150 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.txt
 create mode 100644 drivers/input/misc/gpio-beeper.c

diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt
new file mode 100644
index 000000000000..a5086e37fce6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-beeper.txt
@@ -0,0 +1,13 @@
+* GPIO beeper device tree bindings
+
+Register a beeper connected to GPIO pin.
+
+Required properties:
+- compatible:	Should be "gpio-beeper".
+- gpios:	From common gpio binding; gpio connection to beeper enable pin.
+
+Example:
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	};
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5f4967d01bc3..4ffc39732513 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -222,6 +222,15 @@ config INPUT_GP2A
 	  To compile this driver as a module, choose M here: the
 	  module will be called gp2ap002a00f.
 
+config INPUT_GPIO_BEEPER
+	tristate "Generic GPIO Beeper support"
+	depends on OF_GPIO
+	help
+	  Say Y here if you have a beeper connected to a GPIO pin.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio-beeper.
+
 config INPUT_GPIO_TILT_POLLED
 	tristate "Polled GPIO tilt switch"
 	depends on GPIOLIB
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0ebfb6dbf0f7..cda71fc52fb3 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
+obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
 obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o
diff --git a/drivers/input/misc/gpio-beeper.c b/drivers/input/misc/gpio-beeper.c
new file mode 100644
index 000000000000..b757435e2b3d
--- /dev/null
+++ b/drivers/input/misc/gpio-beeper.c
@@ -0,0 +1,127 @@
+/*
+ * Generic GPIO beeper driver
+ *
+ * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#define BEEPER_MODNAME		"gpio-beeper"
+
+struct gpio_beeper {
+	struct work_struct	work;
+	int			gpio;
+	bool			active_low;
+	bool			beeping;
+};
+
+static void gpio_beeper_toggle(struct gpio_beeper *beep, bool on)
+{
+	gpio_set_value_cansleep(beep->gpio, on ^ beep->active_low);
+}
+
+static void gpio_beeper_work(struct work_struct *work)
+{
+	struct gpio_beeper *beep = container_of(work, struct gpio_beeper, work);
+
+	gpio_beeper_toggle(beep, beep->beeping);
+}
+
+static int gpio_beeper_event(struct input_dev *dev, unsigned int type,
+			     unsigned int code, int value)
+{
+	struct gpio_beeper *beep = input_get_drvdata(dev);
+
+	if (type != EV_SND || code != SND_BELL)
+		return -ENOTSUPP;
+
+	if (value < 0)
+		return -EINVAL;
+
+	beep->beeping = value;
+	/* Schedule work to actually turn the beeper on or off */
+	schedule_work(&beep->work);
+
+	return 0;
+}
+
+static void gpio_beeper_close(struct input_dev *input)
+{
+	struct gpio_beeper *beep = input_get_drvdata(input);
+
+	cancel_work_sync(&beep->work);
+	gpio_beeper_toggle(beep, false);
+}
+
+static int gpio_beeper_probe(struct platform_device *pdev)
+{
+	struct gpio_beeper *beep;
+	enum of_gpio_flags flags;
+	struct input_dev *input;
+	unsigned long gflags;
+	int err;
+
+	beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL);
+	if (!beep)
+		return -ENOMEM;
+
+	beep->gpio = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
+	if (!gpio_is_valid(beep->gpio))
+		return beep->gpio;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	INIT_WORK(&beep->work, gpio_beeper_work);
+
+	input->name		= pdev->name;
+	input->id.bustype	= BUS_HOST;
+	input->id.vendor	= 0x0001;
+	input->id.product	= 0x0001;
+	input->id.version	= 0x0100;
+	input->close		= gpio_beeper_close;
+	input->event		= gpio_beeper_event;
+
+	input_set_capability(input, EV_SND, SND_BELL);
+
+	beep->active_low = flags & OF_GPIO_ACTIVE_LOW;
+	gflags = beep->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+
+	err = devm_gpio_request_one(&pdev->dev, beep->gpio, gflags, pdev->name);
+	if (err)
+		return err;
+
+	input_set_drvdata(input, beep);
+
+	return input_register_device(input);
+}
+
+static struct of_device_id gpio_beeper_of_match[] = {
+	{ .compatible = BEEPER_MODNAME, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpio_beeper_of_match);
+
+static struct platform_driver gpio_beeper_platform_driver = {
+	.driver	= {
+		.name		= BEEPER_MODNAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= gpio_beeper_of_match,
+	},
+	.probe	= gpio_beeper_probe,
+};
+module_platform_driver(gpio_beeper_platform_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Generic GPIO beeper driver");
-- 
cgit v1.2.3


From c52b4fc7817579c88db55b2029db7bf2e9d4c934 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Sun, 1 Dec 2013 22:11:26 -0800
Subject: Input: ads7846 - use IS_ENABLED() macro

Using the IS_ENABLED() macro can make the code shorter and simpler

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/ads7846.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index ea195360747e..569578638233 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -101,7 +101,7 @@ struct ads7846 {
 	struct spi_device	*spi;
 	struct regulator	*reg;
 
-#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
+#if IS_ENABLED(CONFIG_HWMON)
 	struct attribute_group	*attr_group;
 	struct device		*hwmon;
 #endif
@@ -421,7 +421,7 @@ static int ads7845_read12_ser(struct device *dev, unsigned command)
 	return status;
 }
 
-#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
+#if IS_ENABLED(CONFIG_HWMON)
 
 #define SHOW(name, var, adjust) static ssize_t \
 name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
-- 
cgit v1.2.3


From 54f05e95132bdb47fa408308d64fd293d3ffb908 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Wed, 4 Dec 2013 08:46:06 -0800
Subject: Input: sh_keysc - restrict non-COMPILE_TEST compilation

Hardware supported by the driver is only found on SUPERH or
ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/keyboard/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index bb174c1a9886..a673c9f3a0b9 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -525,7 +525,7 @@ config KEYBOARD_SUNKBD
 
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
-	depends on SUPERH || ARM || COMPILE_TEST
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  Say Y here if you want to use a keypad attached to the KEYSC block
 	  on SuperH processors such as sh7722 and sh7343.
-- 
cgit v1.2.3


From c838cb3d477f79738ee03ede53a3f724021f3ae0 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Thu, 5 Dec 2013 19:21:10 -0800
Subject: Input: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead
of accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/keyboard/adp5520-keys.c       |  2 +-
 drivers/input/keyboard/adp5588-keys.c       | 10 ++++++----
 drivers/input/keyboard/adp5589-keys.c       |  8 ++++----
 drivers/input/keyboard/bf54x-keys.c         |  4 ++--
 drivers/input/keyboard/davinci_keyscan.c    |  2 +-
 drivers/input/keyboard/ep93xx_keypad.c      |  2 +-
 drivers/input/keyboard/imx_keypad.c         |  3 ++-
 drivers/input/keyboard/lm8323.c             |  2 +-
 drivers/input/keyboard/lm8333.c             |  3 ++-
 drivers/input/keyboard/max7359_keypad.c     |  3 ++-
 drivers/input/keyboard/mcs_touchkey.c       |  2 +-
 drivers/input/keyboard/mpr121_touchkey.c    |  3 ++-
 drivers/input/keyboard/nomadik-ske-keypad.c |  3 ++-
 drivers/input/keyboard/omap-keypad.c        |  2 +-
 drivers/input/keyboard/pxa930_rotary.c      |  3 ++-
 drivers/input/keyboard/samsung-keypad.c     |  2 +-
 drivers/input/keyboard/sh_keysc.c           |  4 ++--
 drivers/input/keyboard/tca6416-keypad.c     |  2 +-
 drivers/input/keyboard/tnetv107x-keypad.c   |  2 +-
 drivers/input/keyboard/twl4030_keypad.c     |  2 +-
 drivers/input/keyboard/w90p910_keypad.c     |  2 +-
 drivers/input/misc/ad714x.c                 |  4 ++--
 drivers/input/misc/adxl34x.c                |  2 +-
 drivers/input/misc/bfin_rotary.c            |  2 +-
 drivers/input/misc/bma150.c                 |  3 ++-
 drivers/input/misc/cma3000_d0x.c            |  2 +-
 drivers/input/misc/gp2ap002a00f.c           |  2 +-
 drivers/input/misc/gpio_tilt_polled.c       |  3 ++-
 drivers/input/misc/kxtj9.c                  |  3 ++-
 drivers/input/misc/pwm-beeper.c             |  2 +-
 drivers/input/misc/twl4030-vibra.c          |  2 +-
 drivers/input/mouse/gpio_mouse.c            |  2 +-
 drivers/input/mouse/pxa930_trkball.c        |  2 +-
 drivers/input/touchscreen/88pm860x-ts.c     |  2 +-
 drivers/input/touchscreen/ad7877.c          |  2 +-
 drivers/input/touchscreen/ad7879.c          |  4 ++--
 drivers/input/touchscreen/atmel_mxt_ts.c    |  2 +-
 drivers/input/touchscreen/atmel_tsadcc.c    |  2 +-
 drivers/input/touchscreen/cy8ctmg110_ts.c   |  2 +-
 drivers/input/touchscreen/cyttsp_core.c     |  4 ++--
 drivers/input/touchscreen/da9034-ts.c       |  2 +-
 drivers/input/touchscreen/edt-ft5x06.c      |  2 +-
 drivers/input/touchscreen/eeti_ts.c         |  2 +-
 drivers/input/touchscreen/ili210x.c         |  2 +-
 drivers/input/touchscreen/mcs5000_ts.c      |  4 ++--
 drivers/input/touchscreen/pixcir_i2c_ts.c   |  3 ++-
 drivers/input/touchscreen/s3c2410_ts.c      |  4 ++--
 drivers/input/touchscreen/st1232.c          |  2 +-
 drivers/input/touchscreen/tsc2005.c         |  2 +-
 drivers/input/touchscreen/ucb1400_ts.c      |  8 ++++----
 drivers/input/touchscreen/wm97xx-core.c     |  2 +-
 51 files changed, 79 insertions(+), 67 deletions(-)

diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c
index ef26b17fb159..0dc1151d02fb 100644
--- a/drivers/input/keyboard/adp5520-keys.c
+++ b/drivers/input/keyboard/adp5520-keys.c
@@ -71,7 +71,7 @@ static int adp5520_keys_notifier(struct notifier_block *nb,
 
 static int adp5520_keys_probe(struct platform_device *pdev)
 {
-	struct adp5520_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct adp5520_keys_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct input_dev *input;
 	struct adp5520_keys *dev;
 	int ret, i;
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index dbd2047f1641..e3874d3410b4 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -173,7 +173,7 @@ static int adp5588_build_gpiomap(struct adp5588_kpad *kpad,
 static int adp5588_gpio_add(struct adp5588_kpad *kpad)
 {
 	struct device *dev = &kpad->client->dev;
-	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
 	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int i, error;
 
@@ -227,7 +227,7 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
 static void adp5588_gpio_remove(struct adp5588_kpad *kpad)
 {
 	struct device *dev = &kpad->client->dev;
-	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_kpad_platform_data *pdata = dev_get_platdata(dev);
 	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int error;
 
@@ -321,7 +321,8 @@ static irqreturn_t adp5588_irq(int irq, void *handle)
 
 static int adp5588_setup(struct i2c_client *client)
 {
-	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int i, ret;
 	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
@@ -424,7 +425,8 @@ static int adp5588_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct adp5588_kpad *kpad;
-	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	struct input_dev *input;
 	unsigned int revid;
 	int ret, i;
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index 67d12b3427c9..e43efa03f3e7 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -499,7 +499,7 @@ static int adp5589_build_gpiomap(struct adp5589_kpad *kpad,
 static int adp5589_gpio_add(struct adp5589_kpad *kpad)
 {
 	struct device *dev = &kpad->client->dev;
-	const struct adp5589_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5589_kpad_platform_data *pdata = dev_get_platdata(dev);
 	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int i, error;
 
@@ -553,7 +553,7 @@ static int adp5589_gpio_add(struct adp5589_kpad *kpad)
 static void adp5589_gpio_remove(struct adp5589_kpad *kpad)
 {
 	struct device *dev = &kpad->client->dev;
-	const struct adp5589_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5589_kpad_platform_data *pdata = dev_get_platdata(dev);
 	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int error;
 
@@ -658,7 +658,7 @@ static int adp5589_setup(struct adp5589_kpad *kpad)
 {
 	struct i2c_client *client = kpad->client;
 	const struct adp5589_kpad_platform_data *pdata =
-		client->dev.platform_data;
+		dev_get_platdata(&client->dev);
 	u8 (*reg) (u8) = kpad->var->reg;
 	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
 	unsigned char pull_mask = 0;
@@ -864,7 +864,7 @@ static int adp5589_probe(struct i2c_client *client,
 {
 	struct adp5589_kpad *kpad;
 	const struct adp5589_kpad_platform_data *pdata =
-		client->dev.platform_data;
+		dev_get_platdata(&client->dev);
 	struct input_dev *input;
 	unsigned int revid;
 	int ret, i;
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index fc88fb48d70d..16fa3400d86a 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -180,7 +180,7 @@ static irqreturn_t bfin_kpad_isr(int irq, void *dev_id)
 static int bfin_kpad_probe(struct platform_device *pdev)
 {
 	struct bf54x_kpad *bf54x_kpad;
-	struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
+	struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct input_dev *input;
 	int i, error;
 
@@ -332,7 +332,7 @@ out:
 
 static int bfin_kpad_remove(struct platform_device *pdev)
 {
-	struct bfin_kpad_platform_data *pdata = pdev->dev.platform_data;
+	struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
 
 	del_timer_sync(&bf54x_kpad->timer);
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index d15977a8361e..1559dc1cf951 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -172,7 +172,7 @@ static int __init davinci_ks_probe(struct platform_device *pdev)
 	struct input_dev *key_dev;
 	struct resource *res, *mem;
 	struct device *dev = &pdev->dev;
-	struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
+	struct davinci_ks_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	int error, i;
 
 	if (pdata->device_enable) {
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 47206bdba411..e59876212b8c 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -244,7 +244,7 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	if (!keypad)
 		return -ENOMEM;
 
-	keypad->pdata = pdev->dev.platform_data;
+	keypad->pdata = dev_get_platdata(&pdev->dev);
 	if (!keypad->pdata) {
 		err = -EINVAL;
 		goto failed_free;
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 328cfc1eed95..34bb35895268 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -425,7 +425,8 @@ MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
 
 static int imx_keypad_probe(struct platform_device *pdev)
 {
-	const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap_data =
+			dev_get_platdata(&pdev->dev);
 	struct imx_keypad *keypad;
 	struct input_dev *input_dev;
 	struct resource *res;
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 0de23f41b2d3..0b42118cbf8f 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -627,7 +627,7 @@ static DEVICE_ATTR(disable_kp, 0644, lm8323_show_disable, lm8323_set_disable);
 static int lm8323_probe(struct i2c_client *client,
 				  const struct i2c_device_id *id)
 {
-	struct lm8323_platform_data *pdata = client->dev.platform_data;
+	struct lm8323_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct input_dev *idev;
 	struct lm8323_chip *lm;
 	int pwm;
diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
index 5a8ca35dc9af..9081cbef11ea 100644
--- a/drivers/input/keyboard/lm8333.c
+++ b/drivers/input/keyboard/lm8333.c
@@ -131,7 +131,8 @@ static irqreturn_t lm8333_irq_thread(int irq, void *data)
 static int lm8333_probe(struct i2c_client *client,
 				  const struct i2c_device_id *id)
 {
-	const struct lm8333_platform_data *pdata = client->dev.platform_data;
+	const struct lm8333_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	struct lm8333 *lm8333;
 	struct input_dev *input;
 	int err, active_time;
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index bc2cdaf563fd..430b54539720 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -182,7 +182,8 @@ static void max7359_initialize(struct i2c_client *client)
 static int max7359_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
-	const struct matrix_keymap_data *keymap_data = client->dev.platform_data;
+	const struct matrix_keymap_data *keymap_data =
+			dev_get_platdata(&client->dev);
 	struct max7359_keypad *keypad;
 	struct input_dev *input_dev;
 	int ret;
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 7c236f9c6a51..5ec77523e040 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -108,7 +108,7 @@ static int mcs_touchkey_probe(struct i2c_client *client,
 	int error;
 	int i;
 
-	pdata = client->dev.platform_data;
+	pdata = dev_get_platdata(&client->dev);
 	if (!pdata) {
 		dev_err(&client->dev, "no platform data defined\n");
 		return -EINVAL;
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index f7f3e9a9fd3f..98b8467aa6c9 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -188,7 +188,8 @@ err_i2c_write:
 static int mpr_touchkey_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
-	const struct mpr121_platform_data *pdata = client->dev.platform_data;
+	const struct mpr121_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	struct mpr121_touchkey *mpr121;
 	struct input_dev *input_dev;
 	int error;
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index c7d505cce72f..63332e2f8628 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -222,7 +222,8 @@ static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
 
 static int __init ske_keypad_probe(struct platform_device *pdev)
 {
-	const struct ske_keypad_platform_data *plat = pdev->dev.platform_data;
+	const struct ske_keypad_platform_data *plat =
+			dev_get_platdata(&pdev->dev);
 	struct ske_keypad *keypad;
 	struct input_dev *input;
 	struct resource *res;
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index d0d5226d9cd4..e80bb9743356 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -248,7 +248,7 @@ static int omap_kp_probe(struct platform_device *pdev)
 {
 	struct omap_kp *omap_kp;
 	struct input_dev *input_dev;
-	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
+	struct omap_kp_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	int i, col_idx, row_idx, ret;
 	unsigned int row_shift, keycodemax;
 
diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c
index 248cdcf95296..367b03ab92a2 100644
--- a/drivers/input/keyboard/pxa930_rotary.c
+++ b/drivers/input/keyboard/pxa930_rotary.c
@@ -84,7 +84,8 @@ static void pxa930_rotary_close(struct input_dev *dev)
 
 static int pxa930_rotary_probe(struct platform_device *pdev)
 {
-	struct pxa930_rotary_platform_data *pdata = pdev->dev.platform_data;
+	struct pxa930_rotary_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
 	struct pxa930_rotary *r;
 	struct input_dev *input_dev;
 	struct resource *res;
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index ac43a486c775..9ac8a1e0c08e 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -321,7 +321,7 @@ static int samsung_keypad_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node)
 		pdata = samsung_keypad_parse_dt(&pdev->dev);
 	else
-		pdata = pdev->dev.platform_data;
+		pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		dev_err(&pdev->dev, "no platform data defined\n");
 		return -EINVAL;
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index fe0e498d2479..d65a98b1d7dd 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -171,7 +171,7 @@ static int sh_keysc_probe(struct platform_device *pdev)
 	int i;
 	int irq, error;
 
-	if (!pdev->dev.platform_data) {
+	if (!dev_get_platdata(&pdev->dev)) {
 		dev_err(&pdev->dev, "no platform data defined\n");
 		error = -EINVAL;
 		goto err0;
@@ -198,7 +198,7 @@ static int sh_keysc_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, priv);
-	memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
+	memcpy(&priv->pdata, dev_get_platdata(&pdev->dev), sizeof(priv->pdata));
 	pdata = &priv->pdata;
 
 	priv->iomem_base = ioremap_nocache(res->start, resource_size(res));
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index bfc832c35a7c..dc983ab6c0ad 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -213,7 +213,7 @@ static int tca6416_keypad_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	pdata = client->dev.platform_data;
+	pdata = dev_get_platdata(&client->dev);
 	if (!pdata) {
 		dev_dbg(&client->dev, "no platform data\n");
 		return -EINVAL;
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index 8bd24d52bf1b..086511c2121b 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -162,7 +162,7 @@ static int keypad_probe(struct platform_device *pdev)
 	int error = 0, sz, row_shift;
 	u32 rev = 0;
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		dev_err(dev, "cannot find device data\n");
 		return -EINVAL;
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index d2d178c84ea7..8bc2879b4c87 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -330,7 +330,7 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
  */
 static int twl4030_kp_probe(struct platform_device *pdev)
 {
-	struct twl4030_keypad_data *pdata = pdev->dev.platform_data;
+	struct twl4030_keypad_data *pdata = dev_get_platdata(&pdev->dev);
 	const struct matrix_keymap_data *keymap_data;
 	struct twl4030_keypad *kp;
 	struct input_dev *input;
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 7b039162a3f8..e03614f20d3b 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -121,7 +121,7 @@ static void w90p910_keypad_close(struct input_dev *dev)
 static int w90p910_keypad_probe(struct platform_device *pdev)
 {
 	const struct w90p910_keypad_platform_data *pdata =
-						pdev->dev.platform_data;
+						dev_get_platdata(&pdev->dev);
 	const struct matrix_keymap_data *keymap_data;
 	struct w90p910_keypad *keypad;
 	struct input_dev *input_dev;
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 2e5d5e1de647..6deecdd3d11b 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -969,7 +969,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
 	int error;
 	struct input_dev *input[MAX_DEVICE_NUM];
 
-	struct ad714x_platform_data *plat_data = dev->platform_data;
+	struct ad714x_platform_data *plat_data = dev_get_platdata(dev);
 	struct ad714x_chip *ad714x;
 	void *drv_mem;
 	unsigned long irqflags;
@@ -986,7 +986,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
 		goto err_out;
 	}
 
-	if (dev->platform_data == NULL) {
+	if (dev_get_platdata(dev) == NULL) {
 		dev_err(dev, "platform data for ad714x doesn't exist\n");
 		error = -EINVAL;
 		goto err_out;
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index 0735de3a6468..d2049972f70a 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -714,7 +714,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 
 	ac->fifo_delay = fifo_delay_default;
 
-	pdata = dev->platform_data;
+	pdata = dev_get_platdata(dev);
 	if (!pdata) {
 		dev_dbg(dev,
 			"No platform data: Using default initialization\n");
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index cd139cb17e32..7703447d1fd9 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -92,7 +92,7 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
 
 static int bfin_rotary_probe(struct platform_device *pdev)
 {
-	struct bfin_rotary_platform_data *pdata = pdev->dev.platform_data;
+	struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct bfin_rot *rotary;
 	struct input_dev *input;
 	int error;
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
index 865c2f9d25b9..52d3a9b28f0b 100644
--- a/drivers/input/misc/bma150.c
+++ b/drivers/input/misc/bma150.c
@@ -526,7 +526,8 @@ static int bma150_register_polled_device(struct bma150_data *bma150)
 static int bma150_probe(struct i2c_client *client,
 				  const struct i2c_device_id *id)
 {
-	const struct bma150_platform_data *pdata = client->dev.platform_data;
+	const struct bma150_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	const struct bma150_cfg *cfg;
 	struct bma150_data *bma150;
 	int chip_id;
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index df9b756594f8..c7d00748277b 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -284,7 +284,7 @@ EXPORT_SYMBOL(cma3000_resume);
 struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
 				       const struct cma3000_bus_ops *bops)
 {
-	const struct cma3000_platform_data *pdata = dev->platform_data;
+	const struct cma3000_platform_data *pdata = dev_get_platdata(dev);
 	struct cma3000_accl_data *data;
 	struct input_dev *input_dev;
 	int rev;
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
index fe30bd0fe4bd..de21e317da32 100644
--- a/drivers/input/misc/gp2ap002a00f.c
+++ b/drivers/input/misc/gp2ap002a00f.c
@@ -125,7 +125,7 @@ static int gp2a_initialize(struct gp2a_data *dt)
 static int gp2a_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
-	const struct gp2a_platform_data *pdata = client->dev.platform_data;
+	const struct gp2a_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct gp2a_data *dt;
 	int error;
 
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
index 714c68369134..38b3c11a8ae9 100644
--- a/drivers/input/misc/gpio_tilt_polled.c
+++ b/drivers/input/misc/gpio_tilt_polled.c
@@ -98,7 +98,8 @@ static void gpio_tilt_polled_close(struct input_polled_dev *dev)
 
 static int gpio_tilt_polled_probe(struct platform_device *pdev)
 {
-	const struct gpio_tilt_platform_data *pdata = pdev->dev.platform_data;
+	const struct gpio_tilt_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
 	struct device *dev = &pdev->dev;
 	struct gpio_tilt_polled_dev *tdev;
 	struct input_polled_dev *poll_dev;
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
index a993b67a8a5b..d708478bc5b5 100644
--- a/drivers/input/misc/kxtj9.c
+++ b/drivers/input/misc/kxtj9.c
@@ -509,7 +509,8 @@ out:
 static int kxtj9_probe(struct i2c_client *client,
 				 const struct i2c_device_id *id)
 {
-	const struct kxtj9_platform_data *pdata = client->dev.platform_data;
+	const struct kxtj9_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	struct kxtj9_data *tj9;
 	int err;
 
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 940566e7be13..8ef288e7c971 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -68,7 +68,7 @@ static int pwm_beeper_event(struct input_dev *input,
 
 static int pwm_beeper_probe(struct platform_device *pdev)
 {
-	unsigned long pwm_id = (unsigned long)pdev->dev.platform_data;
+	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
 	struct pwm_beeper *beeper;
 	int error;
 
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 68a5f33152a8..d993775a7c39 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -193,7 +193,7 @@ static bool twl4030_vibra_check_coexist(struct twl4030_vibra_data *pdata,
 
 static int twl4030_vibra_probe(struct platform_device *pdev)
 {
-	struct twl4030_vibra_data *pdata = pdev->dev.platform_data;
+	struct twl4030_vibra_data *pdata = dev_get_platdata(&pdev->dev);
 	struct device_node *twl4030_core_node = pdev->dev.parent->of_node;
 	struct vibra_info *info;
 	int ret;
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 6b44413f54e3..6810a4626a2a 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -48,7 +48,7 @@ static void gpio_mouse_scan(struct input_polled_dev *dev)
 
 static int gpio_mouse_probe(struct platform_device *pdev)
 {
-	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_mouse_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct input_polled_dev *input_poll;
 	struct input_dev *input;
 	int pin, i;
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index 0ecb9e7945eb..d20d2ae5f1ee 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -166,7 +166,7 @@ static int pxa930_trkball_probe(struct platform_device *pdev)
 	if (!trkball)
 		return -ENOMEM;
 
-	trkball->pdata = pdev->dev.platform_data;
+	trkball->pdata = dev_get_platdata(&pdev->dev);
 	if (!trkball->pdata) {
 		dev_err(&pdev->dev, "no platform data defined\n");
 		error = -EINVAL;
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c
index f7de14a268bf..544e20c551f8 100644
--- a/drivers/input/touchscreen/88pm860x-ts.c
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -172,7 +172,7 @@ static int pm860x_touch_dt_init(struct platform_device *pdev,
 static int pm860x_touch_probe(struct platform_device *pdev)
 {
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
-	struct pm860x_touch_pdata *pdata = pdev->dev.platform_data;
+	struct pm860x_touch_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct pm860x_touch *touch;
 	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
 				 : chip->companion;
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 69834dd3c313..b9f9bcb22683 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -686,7 +686,7 @@ static int ad7877_probe(struct spi_device *spi)
 {
 	struct ad7877			*ts;
 	struct input_dev		*input_dev;
-	struct ad7877_platform_data	*pdata = spi->dev.platform_data;
+	struct ad7877_platform_data	*pdata = dev_get_platdata(&spi->dev);
 	int				err;
 	u16				verify;
 
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index facd3057b62d..a0364d8ae6c6 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -470,7 +470,7 @@ static int ad7879_gpio_add(struct ad7879 *ts,
 
 static void ad7879_gpio_remove(struct ad7879 *ts)
 {
-	const struct ad7879_platform_data *pdata = ts->dev->platform_data;
+	const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev);
 	int ret;
 
 	if (pdata->gpio_export) {
@@ -495,7 +495,7 @@ static inline void ad7879_gpio_remove(struct ad7879 *ts)
 struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
 			    const struct ad7879_bus_ops *bops)
 {
-	struct ad7879_platform_data *pdata = dev->platform_data;
+	struct ad7879_platform_data *pdata = dev_get_platdata(dev);
 	struct ad7879 *ts;
 	struct input_dev *input_dev;
 	int err;
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 59aa24002c7b..37ea05741d20 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1130,7 +1130,7 @@ static void mxt_input_close(struct input_dev *dev)
 static int mxt_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
-	const struct mxt_platform_data *pdata = client->dev.platform_data;
+	const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct mxt_data *data;
 	struct input_dev *input_dev;
 	int error;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index bddabc595077..f7d1ea5849ba 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -182,7 +182,7 @@ static int atmel_tsadcc_probe(struct platform_device *pdev)
 	struct atmel_tsadcc	*ts_dev;
 	struct input_dev	*input_dev;
 	struct resource		*res;
-	struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
+	struct at91_tsadcc_data *pdata = dev_get_platdata(&pdev->dev);
 	int		err;
 	unsigned int	prsc;
 	unsigned int	reg;
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index 8c651985a5c4..5bf1aeeea825 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -178,7 +178,7 @@ static irqreturn_t cy8ctmg110_irq_thread(int irq, void *dev_id)
 static int cy8ctmg110_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
-	const struct cy8ctmg110_pdata *pdata = client->dev.platform_data;
+	const struct cy8ctmg110_pdata *pdata = dev_get_platdata(&client->dev);
 	struct cy8ctmg110 *ts;
 	struct input_dev *input_dev;
 	int err;
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
index d53e0b72a407..56088eceacdc 100644
--- a/drivers/input/touchscreen/cyttsp_core.c
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -534,7 +534,7 @@ static void cyttsp_close(struct input_dev *dev)
 struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
 			    struct device *dev, int irq, size_t xfer_buf_size)
 {
-	const struct cyttsp_platform_data *pdata = dev->platform_data;
+	const struct cyttsp_platform_data *pdata = dev_get_platdata(dev);
 	struct cyttsp *ts;
 	struct input_dev *input_dev;
 	int error;
@@ -553,7 +553,7 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
 
 	ts->dev = dev;
 	ts->input = input_dev;
-	ts->pdata = dev->platform_data;
+	ts->pdata = dev_get_platdata(dev);
 	ts->bus_ops = bus_ops;
 	ts->irq = irq;
 
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index 34ad84105e6e..ea0f7645220f 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -299,7 +299,7 @@ static void da9034_touch_close(struct input_dev *dev)
 
 static int da9034_touch_probe(struct platform_device *pdev)
 {
-	struct da9034_touch_pdata *pdata = pdev->dev.platform_data;
+	struct da9034_touch_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct da9034_touch *touch;
 	struct input_dev *input_dev;
 	int ret;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 83fa1b15a97f..af0d68b703b7 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -705,7 +705,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 					 const struct i2c_device_id *id)
 {
 	const struct edt_ft5x06_platform_data *pdata =
-						client->dev.platform_data;
+						dev_get_platdata(&client->dev);
 	struct edt_ft5x06_ts_data *tsdata;
 	struct input_dev *input;
 	int error;
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 1ce3d29ffca5..b1884ddd7a84 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev)
 static int eeti_ts_probe(struct i2c_client *client,
 				   const struct i2c_device_id *idp)
 {
-	struct eeti_ts_platform_data *pdata = client->dev.platform_data;
+	struct eeti_ts_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct eeti_ts_priv *priv;
 	struct input_dev *input;
 	unsigned int irq_flags;
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index 1418bdda61bb..2a5089139818 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -184,7 +184,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 				       const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
-	const struct ili210x_platform_data *pdata = dev->platform_data;
+	const struct ili210x_platform_data *pdata = dev_get_platdata(dev);
 	struct ili210x *priv;
 	struct input_dev *input;
 	struct panel_info panel;
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index f9f4e0c56eda..58486f135a4c 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -194,7 +194,7 @@ static int mcs5000_ts_probe(struct i2c_client *client,
 	struct input_dev *input_dev;
 	int ret;
 
-	if (!client->dev.platform_data)
+	if (!dev_get_platdata(&client->dev))
 		return -EINVAL;
 
 	data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
@@ -207,7 +207,7 @@ static int mcs5000_ts_probe(struct i2c_client *client,
 
 	data->client = client;
 	data->input_dev = input_dev;
-	data->platform_data = client->dev.platform_data;
+	data->platform_data = dev_get_platdata(&client->dev);
 
 	input_dev->name = "MELPAS MCS-5000 Touchscreen";
 	input_dev->id.bustype = BUS_I2C;
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 6cc6b36663ff..02392d2061d6 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -128,7 +128,8 @@ static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
 static int pixcir_i2c_ts_probe(struct i2c_client *client,
 					 const struct i2c_device_id *id)
 {
-	const struct pixcir_ts_platform_data *pdata = client->dev.platform_data;
+	const struct pixcir_ts_platform_data *pdata =
+			dev_get_platdata(&client->dev);
 	struct pixcir_i2c_ts_data *tsdata;
 	struct input_dev *input;
 	int error;
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index b061af2c8376..d32bd9e6d215 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -251,7 +251,7 @@ static int s3c2410ts_probe(struct platform_device *pdev)
 
 	ts.dev = dev;
 
-	info = pdev->dev.platform_data;
+	info = dev_get_platdata(&pdev->dev);
 	if (!info) {
 		dev_err(dev, "no platform data, cannot attach\n");
 		return -EINVAL;
@@ -392,7 +392,7 @@ static int s3c2410ts_suspend(struct device *dev)
 static int s3c2410ts_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	struct s3c2410_ts_mach_info *info = pdev->dev.platform_data;
+	struct s3c2410_ts_mach_info *info = dev_get_platdata(&pdev->dev);
 
 	clk_enable(ts.clock);
 	enable_irq(ts.irq_tc);
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 2f03b2f289dd..5c342b3139e8 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -154,7 +154,7 @@ static int st1232_ts_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct st1232_ts_data *ts;
-	struct st1232_pdata *pdata = client->dev.platform_data;
+	struct st1232_pdata *pdata = dev_get_platdata(&client->dev);
 	struct input_dev *input_dev;
 	int error;
 
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 811353353917..550adcbbfc23 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -571,7 +571,7 @@ static void tsc2005_setup_spi_xfer(struct tsc2005 *ts)
 
 static int tsc2005_probe(struct spi_device *spi)
 {
-	const struct tsc2005_platform_data *pdata = spi->dev.platform_data;
+	const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev);
 	struct tsc2005 *ts;
 	struct input_dev *input_dev;
 	unsigned int max_x, max_y, max_p;
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 1271f97b4079..5b3ca807d179 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -320,7 +320,7 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb,
 
 static int ucb1400_ts_probe(struct platform_device *pdev)
 {
-	struct ucb1400_ts *ucb = pdev->dev.platform_data;
+	struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
 	int error, x_res, y_res;
 	u16 fcsr;
 
@@ -399,7 +399,7 @@ err:
 
 static int ucb1400_ts_remove(struct platform_device *pdev)
 {
-	struct ucb1400_ts *ucb = pdev->dev.platform_data;
+	struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
 
 	free_irq(ucb->irq, ucb);
 	input_unregister_device(ucb->ts_idev);
@@ -410,7 +410,7 @@ static int ucb1400_ts_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int ucb1400_ts_suspend(struct device *dev)
 {
-	struct ucb1400_ts *ucb = dev->platform_data;
+	struct ucb1400_ts *ucb = dev_get_platdata(dev);
 	struct input_dev *idev = ucb->ts_idev;
 
 	mutex_lock(&idev->mutex);
@@ -424,7 +424,7 @@ static int ucb1400_ts_suspend(struct device *dev)
 
 static int ucb1400_ts_resume(struct device *dev)
 {
-	struct ucb1400_ts *ucb = dev->platform_data;
+	struct ucb1400_ts *ucb = dev_get_platdata(dev);
 	struct input_dev *idev = ucb->ts_idev;
 
 	mutex_lock(&idev->mutex);
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 7e45c9f6e6b7..d0ef91fc87d1 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -584,7 +584,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
 static int wm97xx_probe(struct device *dev)
 {
 	struct wm97xx *wm;
-	struct wm97xx_pdata *pdata = dev->platform_data;
+	struct wm97xx_pdata *pdata = dev_get_platdata(dev);
 	int ret = 0, id = 0;
 
 	wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
-- 
cgit v1.2.3


From 670d20725e4f707feca89769587bd192bc5786ae Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sat, 3 Nov 2012 12:16:09 -0700
Subject: Input: samsung-keypad - favor platform data if present

We should be able to override firmware-provided parameters with in-kernel
data, if needed. To that effect favor platform data, if present, over
devicetree data.

Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/keyboard/samsung-keypad.c | 36 +++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 9ac8a1e0c08e..a7357adeaf24 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -244,8 +244,8 @@ static void samsung_keypad_close(struct input_dev *input_dev)
 }
 
 #ifdef CONFIG_OF
-static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
-				struct device *dev)
+static struct samsung_keypad_platdata *
+samsung_keypad_parse_dt(struct device *dev)
 {
 	struct samsung_keypad_platdata *pdata;
 	struct matrix_keymap_data *keymap_data;
@@ -253,17 +253,22 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
 	struct device_node *np = dev->of_node, *key_np;
 	unsigned int key_count;
 
+	if (!np) {
+		dev_err(dev, "missing device tree data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
 		dev_err(dev, "could not allocate memory for platform data\n");
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
 	of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
 	if (!num_rows || !num_cols) {
 		dev_err(dev, "number of keypad rows/columns not specified\n");
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 	pdata->rows = num_rows;
 	pdata->cols = num_cols;
@@ -271,7 +276,7 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
 	keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
 	if (!keymap_data) {
 		dev_err(dev, "could not allocate memory for keymap data\n");
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 	pdata->keymap_data = keymap_data;
 
@@ -280,7 +285,7 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
 	keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
 	if (!keymap) {
 		dev_err(dev, "could not allocate memory for keymap\n");
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 	keymap_data->keymap = keymap;
 
@@ -294,16 +299,19 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
 
 	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
 		pdata->no_autorepeat = true;
+
 	if (of_get_property(np, "linux,input-wakeup", NULL))
 		pdata->wakeup = true;
 
 	return pdata;
 }
 #else
-static
-struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
+static struct samsung_keypad_platdata *
+samsung_keypad_parse_dt(struct device *dev)
 {
-	return NULL;
+	dev_err(dev, "no platform data defined\n");
+
+	return ERR_PTR(-EINVAL);
 }
 #endif
 
@@ -318,13 +326,11 @@ static int samsung_keypad_probe(struct platform_device *pdev)
 	unsigned int keymap_size;
 	int error;
 
-	if (pdev->dev.of_node)
-		pdata = samsung_keypad_parse_dt(&pdev->dev);
-	else
-		pdata = dev_get_platdata(&pdev->dev);
+	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -EINVAL;
+		pdata = samsung_keypad_parse_dt(&pdev->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
 	}
 
 	keymap_data = pdata->keymap_data;
-- 
cgit v1.2.3


From 9222d8069d3812400b346ebd5fea47b8b88c7cbf Mon Sep 17 00:00:00 2001
From: Rashika Kheria <rashika.kheria@gmail.com>
Date: Sun, 15 Dec 2013 02:25:55 -0800
Subject: Input: cyttsp - include appropriate header file in
 cyttsp_i2c_common.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Include cyttsp4_core.h in cyttsp_i2c_common.c to ensure that implementation
of cyttsp_i2c_read_block_data() and cyttsp_i2c_write_block_data()
match what the rest of the driver expects.

Thus, it also eliminates the following warning in cyttsp_i2c_common.c:
drivers/input/touchscreen/cyttsp_i2c_common.c:34:5: warning: no previous prototype for ‘cyttsp_i2c_read_block_data’ [-Wmissing-prototypes]
drivers/input/touchscreen/cyttsp_i2c_common.c:64:5: warning: no previous prototype for ‘cyttsp_i2c_write_block_data’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/cyttsp_i2c_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/touchscreen/cyttsp_i2c_common.c b/drivers/input/touchscreen/cyttsp_i2c_common.c
index 1d7b6f154168..ccefa56ca212 100644
--- a/drivers/input/touchscreen/cyttsp_i2c_common.c
+++ b/drivers/input/touchscreen/cyttsp_i2c_common.c
@@ -31,6 +31,8 @@
 #include <linux/module.h>
 #include <linux/types.h>
 
+#include "cyttsp4_core.h"
+
 int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
 				      u16 addr, u8 length, void *values)
 {
-- 
cgit v1.2.3


From 12a5a8fdfbab14427df0eb6e6c05559444ee2c73 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Sun, 15 Dec 2013 03:43:06 -0800
Subject: Input: pm8xxx-vibrator - switch to using managed resources

Simplify the error paths and reduce the lines of code in this
driver by using the devm_* APIs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/pm8xxx-vibrator.c | 43 ++++++++++--------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)

diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index ec086f6f3cc3..50be8abb7d0c 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -186,13 +186,13 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	int error;
 	u8 val;
 
-	vib = kzalloc(sizeof(*vib), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!vib || !input_dev) {
-		dev_err(&pdev->dev, "couldn't allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
+	if (!vib)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	INIT_WORK(&vib->work, pm8xxx_work_handler);
 	vib->dev = &pdev->dev;
@@ -201,17 +201,17 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	/* operate in manual mode */
 	error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
 	if (error < 0)
-		goto err_free_mem;
+		return error;
+
 	val &= ~VIB_DRV_EN_MANUAL_MASK;
 	error = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
 	if (error < 0)
-		goto err_free_mem;
+		return error;
 
 	vib->reg_vib_drv = val;
 
 	input_dev->name = "pm8xxx_vib_ffmemless";
 	input_dev->id.version = 1;
-	input_dev->dev.parent = &pdev->dev;
 	input_dev->close = pm8xxx_vib_close;
 	input_set_drvdata(input_dev, vib);
 	input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);
@@ -221,35 +221,17 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	if (error) {
 		dev_err(&pdev->dev,
 			"couldn't register vibrator as FF device\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "couldn't register input device\n");
-		goto err_destroy_memless;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, vib);
 	return 0;
-
-err_destroy_memless:
-	input_ff_destroy(input_dev);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(vib);
-
-	return error;
-}
-
-static int pm8xxx_vib_remove(struct platform_device *pdev)
-{
-	struct pm8xxx_vib *vib = platform_get_drvdata(pdev);
-
-	input_unregister_device(vib->vib_input_dev);
-	kfree(vib);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -268,7 +250,6 @@ static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
 
 static struct platform_driver pm8xxx_vib_driver = {
 	.probe		= pm8xxx_vib_probe,
-	.remove		= pm8xxx_vib_remove,
 	.driver		= {
 		.name	= "pm8xxx-vib",
 		.owner	= THIS_MODULE,
-- 
cgit v1.2.3


From 21014b80257846a5561b0d0e8fed47a65edebf46 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Sun, 15 Dec 2013 03:46:21 -0800
Subject: Input: pm8xxx-vibrator - migrate to regmap APIs

Use the regmap APIs for this driver instead of custom pm8xxx
APIs. This breaks this driver's dependency on the pm8xxx APIs and
allows us to easily port it to other bus protocols in the future.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/pm8xxx-vibrator.c | 61 +++++++++---------------------------
 1 file changed, 14 insertions(+), 47 deletions(-)

diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index 50be8abb7d0c..28251560249d 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/slab.h>
-#include <linux/mfd/pm8xxx/core.h>
+#include <linux/regmap.h>
 
 #define VIB_DRV			0x4A
 
@@ -35,7 +35,7 @@
  * struct pm8xxx_vib - structure to hold vibrator data
  * @vib_input_dev: input device supporting force feedback
  * @work: work structure to set the vibration parameters
- * @dev: device supporting force feedback
+ * @regmap: regmap for register read/write
  * @speed: speed of vibration set from userland
  * @active: state of vibrator
  * @level: level of vibration to set in the chip
@@ -44,49 +44,13 @@
 struct pm8xxx_vib {
 	struct input_dev *vib_input_dev;
 	struct work_struct work;
-	struct device *dev;
+	struct regmap *regmap;
 	int speed;
 	int level;
 	bool active;
 	u8  reg_vib_drv;
 };
 
-/**
- * pm8xxx_vib_read_u8 - helper to read a byte from pmic chip
- * @vib: pointer to vibrator structure
- * @data: placeholder for data to be read
- * @reg: register address
- */
-static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib,
-				 u8 *data, u16 reg)
-{
-	int rc;
-
-	rc = pm8xxx_readb(vib->dev->parent, reg, data);
-	if (rc < 0)
-		dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n",
-				reg, rc);
-	return rc;
-}
-
-/**
- * pm8xxx_vib_write_u8 - helper to write a byte to pmic chip
- * @vib: pointer to vibrator structure
- * @data: data to write
- * @reg: register address
- */
-static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
-				 u8 data, u16 reg)
-{
-	int rc;
-
-	rc = pm8xxx_writeb(vib->dev->parent, reg, data);
-	if (rc < 0)
-		dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n",
-				reg, rc);
-	return rc;
-}
-
 /**
  * pm8xxx_vib_set - handler to start/stop vibration
  * @vib: pointer to vibrator structure
@@ -95,14 +59,14 @@ static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
 static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
 {
 	int rc;
-	u8 val = vib->reg_vib_drv;
+	unsigned int val = vib->reg_vib_drv;
 
 	if (on)
 		val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
 	else
 		val &= ~VIB_DRV_SEL_MASK;
 
-	rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
+	rc = regmap_write(vib->regmap, VIB_DRV, val);
 	if (rc < 0)
 		return rc;
 
@@ -118,9 +82,9 @@ static void pm8xxx_work_handler(struct work_struct *work)
 {
 	struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
 	int rc;
-	u8 val;
+	unsigned int val;
 
-	rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
+	rc = regmap_read(vib->regmap, VIB_DRV, &val);
 	if (rc < 0)
 		return;
 
@@ -184,27 +148,30 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	struct pm8xxx_vib *vib;
 	struct input_dev *input_dev;
 	int error;
-	u8 val;
+	unsigned int val;
 
 	vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
 	if (!vib)
 		return -ENOMEM;
 
+	vib->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!vib->regmap)
+		return -ENODEV;
+
 	input_dev = devm_input_allocate_device(&pdev->dev);
 	if (!input_dev)
 		return -ENOMEM;
 
 	INIT_WORK(&vib->work, pm8xxx_work_handler);
-	vib->dev = &pdev->dev;
 	vib->vib_input_dev = input_dev;
 
 	/* operate in manual mode */
-	error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
+	error = regmap_read(vib->regmap, VIB_DRV, &val);
 	if (error < 0)
 		return error;
 
 	val &= ~VIB_DRV_EN_MANUAL_MASK;
-	error = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
+	error = regmap_write(vib->regmap, VIB_DRV, val);
 	if (error < 0)
 		return error;
 
-- 
cgit v1.2.3


From b27f8fee4965f42405720097af045a8deebd3bcc Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Sun, 15 Dec 2013 03:14:47 -0800
Subject: Input: pmic8xxx-pwrkey - pass input device directly to interrupt

Instead of passing the pointer to the container structure just
pass the input device here. This saves a dereference in the fast
path.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/pmic8xxx-pwrkey.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index b49b738aa9c6..d618c58f8a22 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -36,22 +36,22 @@ struct pmic8xxx_pwrkey {
 	int key_press_irq;
 };
 
-static irqreturn_t pwrkey_press_irq(int irq, void *_pwrkey)
+static irqreturn_t pwrkey_press_irq(int irq, void *_pwr)
 {
-	struct pmic8xxx_pwrkey *pwrkey = _pwrkey;
+	struct input_dev *pwr = _pwr;
 
-	input_report_key(pwrkey->pwr, KEY_POWER, 1);
-	input_sync(pwrkey->pwr);
+	input_report_key(pwr, KEY_POWER, 1);
+	input_sync(pwr);
 
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t pwrkey_release_irq(int irq, void *_pwrkey)
+static irqreturn_t pwrkey_release_irq(int irq, void *_pwr)
 {
-	struct pmic8xxx_pwrkey *pwrkey = _pwrkey;
+	struct input_dev *pwr = _pwr;
 
-	input_report_key(pwrkey->pwr, KEY_POWER, 0);
-	input_sync(pwrkey->pwr);
+	input_report_key(pwr, KEY_POWER, 0);
+	input_sync(pwr);
 
 	return IRQ_HANDLED;
 }
@@ -154,7 +154,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pwrkey);
 
 	err = request_irq(key_press_irq, pwrkey_press_irq,
-		IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_press", pwrkey);
+		IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_press", pwr);
 	if (err < 0) {
 		dev_dbg(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
 				 key_press_irq, err);
@@ -162,7 +162,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	}
 
 	err = request_irq(key_release_irq, pwrkey_release_irq,
-		 IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_release", pwrkey);
+		 IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_release", pwr);
 	if (err < 0) {
 		dev_dbg(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
 				 key_release_irq, err);
@@ -194,8 +194,8 @@ static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	free_irq(key_press_irq, pwrkey);
-	free_irq(key_release_irq, pwrkey);
+	free_irq(key_press_irq, pwrkey->pwr);
+	free_irq(key_release_irq, pwrkey->pwr);
 	input_unregister_device(pwrkey->pwr);
 	kfree(pwrkey);
 
-- 
cgit v1.2.3


From 1e63bd9cc43db5400a1423a7ec8266b4e7c54bd0 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Sun, 15 Dec 2013 03:24:45 -0800
Subject: Input: pmic8xxx-pwrkey - migrate to regmap APIs

Use the regmap APIs for this driver instead of custom pm8xxx
APIs. This breaks this driver's dependency on the pm8xxx APIs and
allows us to easily port it to other bus protocols in the future.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/pmic8xxx-pwrkey.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index d618c58f8a22..ef938405a9c6 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -18,9 +18,9 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/log2.h>
 
-#include <linux/mfd/pm8xxx/core.h>
 #include <linux/input/pmic8xxx-pwrkey.h>
 
 #define PON_CNTL_1 0x1C
@@ -88,7 +88,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	int key_press_irq = platform_get_irq(pdev, 1);
 	int err;
 	unsigned int delay;
-	u8 pon_cntl;
+	unsigned int pon_cntl;
+	struct regmap *regmap;
 	struct pmic8xxx_pwrkey *pwrkey;
 	const struct pm8xxx_pwrkey_platform_data *pdata =
 					dev_get_platdata(&pdev->dev);
@@ -103,6 +104,12 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap for the device\n");
+		return -ENODEV;
+	}
+
 	pwrkey = kzalloc(sizeof(*pwrkey), GFP_KERNEL);
 	if (!pwrkey)
 		return -ENOMEM;
@@ -123,7 +130,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	delay = (pdata->kpd_trigger_delay_us << 10) / USEC_PER_SEC;
 	delay = 1 + ilog2(delay);
 
-	err = pm8xxx_readb(pdev->dev.parent, PON_CNTL_1, &pon_cntl);
+	err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed reading PON_CNTL_1 err=%d\n", err);
 		goto free_input_dev;
@@ -136,7 +143,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	else
 		pon_cntl &= ~PON_CNTL_PULL_UP;
 
-	err = pm8xxx_writeb(pdev->dev.parent, PON_CNTL_1, pon_cntl);
+	err = regmap_write(regmap, PON_CNTL_1, pon_cntl);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed writing PON_CNTL_1 err=%d\n", err);
 		goto free_input_dev;
-- 
cgit v1.2.3


From 961794a00eab03f4344b7d5e825e8e789e55da87 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Thu, 5 Dec 2013 12:54:53 -0800
Subject: Input: wacom - add reporting of SW_MUTE_DEVICE events

New Intuos series models added a hardware switch to turn touch
data on/off. The state of the switch is reported periodically
from the tablet. To report the state the driver will emit SW_MUTE_DEVICE
events.

Reviewed_by: Chris Bagwell <chris@cnpbagwell.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/tablet/wacom_sys.c | 12 ++++++++++++
 drivers/input/tablet/wacom_wac.c | 30 +++++++++++++++++++++++++++---
 drivers/input/tablet/wacom_wac.h |  5 +++++
 3 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 8318826d976e..b16ebef5b911 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1197,6 +1197,8 @@ static void wacom_wireless_work(struct work_struct *work)
 		wacom_wac1->features.device_type = BTN_TOOL_PEN;
 		snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
 			 wacom_wac1->features.name);
+		wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
+		wacom_wac1->shared->type = wacom_wac1->features.type;
 		error = wacom_register_input(wacom1);
 		if (error)
 			goto fail;
@@ -1218,6 +1220,10 @@ static void wacom_wireless_work(struct work_struct *work)
 			error = wacom_register_input(wacom2);
 			if (error)
 				goto fail;
+
+			if (wacom_wac1->features.type == INTUOSHT &&
+			    wacom_wac1->features.touch_max)
+				wacom_wac->shared->touch_input = wacom_wac2->input;
 		}
 
 		error = wacom_initialize_battery(wacom);
@@ -1396,6 +1402,12 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			goto fail5;
 		}
 	}
+
+	if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) {
+		if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
+			wacom_wac->shared->touch_input = wacom_wac->input;
+	}
+
 	return 0;
 
  fail5: wacom_destroy_leds(wacom);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 7655088f78e0..048e5b38f167 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1219,13 +1219,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
 
 static int wacom_bpt_pen(struct wacom_wac *wacom)
 {
+	struct wacom_features *features = &wacom->features;
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
 	int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
 
-	if (data[0] != WACOM_REPORT_PENABLED)
+	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB)
 	    return 0;
 
+	if (data[0] == WACOM_REPORT_USB) {
+		if (features->type == INTUOSHT && features->touch_max) {
+			input_report_switch(wacom->shared->touch_input,
+					    SW_MUTE_DEVICE, data[8] & 0x40);
+			input_sync(wacom->shared->touch_input);
+		}
+		return 0;
+	}
+
 	prox = (data[1] & 0x20) == 0x20;
 
 	/*
@@ -1258,8 +1268,8 @@ static int wacom_bpt_pen(struct wacom_wac *wacom)
 		 * touching and applying pressure; do not report negative
 		 * distance.
 		 */
-		if (data[8] <= wacom->features.distance_max)
-			d = wacom->features.distance_max - data[8];
+		if (data[8] <= features->distance_max)
+			d = features->distance_max - data[8];
 
 		pen = data[1] & 0x01;
 		btn1 = data[1] & 0x02;
@@ -1310,6 +1320,13 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
 	if (connected) {
 		int pid, battery;
 
+		if ((wacom->shared->type == INTUOSHT) &&
+				wacom->shared->touch_max) {
+			input_report_switch(wacom->shared->touch_input,
+					SW_MUTE_DEVICE, data[5] & 0x40);
+			input_sync(wacom->shared->touch_input);
+		}
+
 		pid = get_unaligned_be16(&data[6]);
 		battery = data[5] & 0x3f;
 		if (wacom->pid != pid) {
@@ -1779,6 +1796,13 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		break;
 
 	case INTUOSHT:
+		if (features->touch_max &&
+		    features->device_type == BTN_TOOL_FINGER) {
+			input_dev->evbit[0] |= BIT_MASK(EV_SW);
+			__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
+		}
+		/* fall through */
+
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 854cceb6d6de..3600cf705fb1 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -55,6 +55,7 @@
 #define WACOM_REPORT_TPC1FGE		18
 #define WACOM_REPORT_24HDT		1
 #define WACOM_REPORT_WL			128
+#define WACOM_REPORT_USB		192
 
 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
@@ -131,6 +132,10 @@ struct wacom_features {
 struct wacom_shared {
 	bool stylus_in_proximity;
 	bool touch_down;
+	/* for wireless device to access USB interfaces */
+	unsigned touch_max;
+	int type;
+	struct input_dev *touch_input;
 };
 
 struct wacom_wac {
-- 
cgit v1.2.3


From e585c40ba19b155150f17124a308ac06e26d424a Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Wed, 27 Nov 2013 20:08:33 -0800
Subject: Input: ads7846 - convert to hwmon_device_register_with_groups()

Simplify the code and create mandatory 'name' attribute by using
new hwmon API.

Also use is_visible to determine visible attributes instead of creating
several different attribute groups.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/ads7846.c | 81 ++++++++++++-------------------------
 1 file changed, 25 insertions(+), 56 deletions(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 569578638233..f91592ab2f3a 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -102,7 +102,6 @@ struct ads7846 {
 	struct regulator	*reg;
 
 #if IS_ENABLED(CONFIG_HWMON)
-	struct attribute_group	*attr_group;
 	struct device		*hwmon;
 #endif
 
@@ -479,42 +478,36 @@ static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
 SHOW(in0_input, vaux, vaux_adjust)
 SHOW(in1_input, vbatt, vbatt_adjust)
 
-static struct attribute *ads7846_attributes[] = {
-	&dev_attr_temp0.attr,
-	&dev_attr_temp1.attr,
-	&dev_attr_in0_input.attr,
-	&dev_attr_in1_input.attr,
-	NULL,
-};
-
-static struct attribute_group ads7846_attr_group = {
-	.attrs = ads7846_attributes,
-};
+static umode_t ads7846_is_visible(struct kobject *kobj, struct attribute *attr,
+				  int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct ads7846 *ts = dev_get_drvdata(dev);
 
-static struct attribute *ads7843_attributes[] = {
-	&dev_attr_in0_input.attr,
-	&dev_attr_in1_input.attr,
-	NULL,
-};
+	if (ts->model == 7843 && index < 2)	/* in0, in1 */
+		return 0;
+	if (ts->model == 7845 && index != 2)	/* in0 */
+		return 0;
 
-static struct attribute_group ads7843_attr_group = {
-	.attrs = ads7843_attributes,
-};
+	return attr->mode;
+}
 
-static struct attribute *ads7845_attributes[] = {
-	&dev_attr_in0_input.attr,
+static struct attribute *ads7846_attributes[] = {
+	&dev_attr_temp0.attr,		/* 0 */
+	&dev_attr_temp1.attr,		/* 1 */
+	&dev_attr_in0_input.attr,	/* 2 */
+	&dev_attr_in1_input.attr,	/* 3 */
 	NULL,
 };
 
-static struct attribute_group ads7845_attr_group = {
-	.attrs = ads7845_attributes,
+static struct attribute_group ads7846_attr_group = {
+	.attrs = ads7846_attributes,
+	.is_visible = ads7846_is_visible,
 };
+__ATTRIBUTE_GROUPS(ads7846_attr);
 
 static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 {
-	struct device *hwmon;
-	int err;
-
 	/* hwmon sensors need a reference voltage */
 	switch (ts->model) {
 	case 7846:
@@ -535,43 +528,19 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 		break;
 	}
 
-	/* different chips have different sensor groups */
-	switch (ts->model) {
-	case 7846:
-		ts->attr_group = &ads7846_attr_group;
-		break;
-	case 7845:
-		ts->attr_group = &ads7845_attr_group;
-		break;
-	case 7843:
-		ts->attr_group = &ads7843_attr_group;
-		break;
-	default:
-		dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model);
-		return 0;
-	}
-
-	err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
-	if (err)
-		return err;
-
-	hwmon = hwmon_device_register(&spi->dev);
-	if (IS_ERR(hwmon)) {
-		sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
-		return PTR_ERR(hwmon);
-	}
+	ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias,
+						      ts, ads7846_attr_groups);
+	if (IS_ERR(ts->hwmon))
+		return PTR_ERR(ts->hwmon);
 
-	ts->hwmon = hwmon;
 	return 0;
 }
 
 static void ads784x_hwmon_unregister(struct spi_device *spi,
 				     struct ads7846 *ts)
 {
-	if (ts->hwmon) {
-		sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+	if (ts->hwmon)
 		hwmon_device_unregister(ts->hwmon);
-	}
 }
 
 #else
-- 
cgit v1.2.3


From 7d0e6192c2f36139e4aa5e4107f4d7fb56d9f290 Mon Sep 17 00:00:00 2001
From: Antonio Ospite <ospite@studenti.unina.it>
Date: Mon, 16 Dec 2013 01:51:47 -0800
Subject: Input: joystick - refer to /dev/input/js0 in documentation

Nowadays the joystick device nodes are created under /dev/input, reflect
this in the documentation in order to make copy and paste easier for
users.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/input/joystick-api.txt | 2 +-
 Documentation/input/joystick.txt     | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/input/joystick-api.txt b/Documentation/input/joystick-api.txt
index c507330740cd..f95f64838788 100644
--- a/Documentation/input/joystick-api.txt
+++ b/Documentation/input/joystick-api.txt
@@ -16,7 +16,7 @@ joystick.
 
 By default, the device is opened in blocking mode.
 
-	int fd = open ("/dev/js0", O_RDONLY);
+	int fd = open ("/dev/input/js0", O_RDONLY);
 
 
 2. Event Reading
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt
index 304262bb661a..8d027dc86c1f 100644
--- a/Documentation/input/joystick.txt
+++ b/Documentation/input/joystick.txt
@@ -116,7 +116,7 @@ your needs:
   For testing the joystick driver functionality, there is the jstest
 program in the utilities package. You run it by typing:
 
-	jstest /dev/js0
+	jstest /dev/input/js0
 
   And it should show a line with the joystick values, which update as you
 move the stick, and press its buttons. The axes should all be zero when the
@@ -136,7 +136,7 @@ joystick should be autocalibrated by the driver automagically. However, with
 some analog joysticks, that either do not use linear resistors, or if you
 want better precision, you can use the jscal program
 
-	jscal -c /dev/js0
+	jscal -c /dev/input/js0
 
  included in the joystick package to set better correction coefficients than
 what the driver would choose itself.
@@ -145,7 +145,7 @@ what the driver would choose itself.
 calibration using the jstest command, and if you do, you then can save the
 correction coefficients into a file
 
-	jscal -p /dev/js0 > /etc/joystick.cal
+	jscal -p /dev/input/js0 > /etc/joystick.cal
 
   And add a line to your rc script executing that file
 
@@ -556,7 +556,7 @@ interface, and "old" for the "0.x" interface. You run it by typing:
 
 5. FAQ
 ~~~~~~
-Q: Running 'jstest /dev/js0' results in "File not found" error. What's the
+Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the
    cause?
 A: The device files don't exist. Create them (see section 2.2).
 
-- 
cgit v1.2.3


From c2729850985934a3124319f8ff1d46d8c72bb012 Mon Sep 17 00:00:00 2001
From: Antonio Ospite <ospite@studenti.unina.it>
Date: Mon, 16 Dec 2013 01:52:17 -0800
Subject: Input: joystick - use sizeof(VARIABLE) in documentation

Use the preferred style sizeof(VARIABLE) instead of sizeof(TYPE) in the
joystick API documentation, Documentation/CodingStyle states that this
is the preferred style for allocations but using it elsewhere is good
too.

Also fix some errors like "sizeof(struct mybuffer)" which didn't mean
anything.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/input/joystick-api.txt | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/Documentation/input/joystick-api.txt b/Documentation/input/joystick-api.txt
index f95f64838788..943b18eac918 100644
--- a/Documentation/input/joystick-api.txt
+++ b/Documentation/input/joystick-api.txt
@@ -23,7 +23,7 @@ By default, the device is opened in blocking mode.
 ~~~~~~~~~~~~~~~~
 
 	struct js_event e;
-	read (fd, &e, sizeof(struct js_event));
+	read (fd, &e, sizeof(e));
 
 where js_event is defined as
 
@@ -34,8 +34,8 @@ where js_event is defined as
 		__u8 number;    /* axis/button number */
 	};
 
-If the read is successful, it will return sizeof(struct js_event), unless
-you wanted to read more than one event per read as described in section 3.1.
+If the read is successful, it will return sizeof(e), unless you wanted to read
+more than one event per read as described in section 3.1.
 
 
 2.1 js_event.type
@@ -99,9 +99,9 @@ may work well if you handle JS_EVENT_INIT events separately,
 
 	if ((js_event.type & ~JS_EVENT_INIT) == JS_EVENT_BUTTON) {
 		if (js_event.value)
-	        	buttons_state |= (1 << js_event.number);
-	   	else
-	      		buttons_state &= ~(1 << js_event.number);
+			buttons_state |= (1 << js_event.number);
+		else
+			buttons_state &= ~(1 << js_event.number);
 	}
 
 is much safer since it can't lose sync with the driver. As you would
@@ -144,14 +144,14 @@ all events on the queue (that is, until you get a -1).
 For example,
 
 	while (1) {
-		while (read (fd, &e, sizeof(struct js_event)) > 0) {
-	        	process_event (e);
-	   	}
-	   	/* EAGAIN is returned when the queue is empty */
-	   	if (errno != EAGAIN) {
-	      		/* error */
-	   	}
-	   	/* do something interesting with processed events */
+		while (read (fd, &e, sizeof(e)) > 0) {
+			process_event (e);
+		}
+		/* EAGAIN is returned when the queue is empty */
+		if (errno != EAGAIN) {
+			/* error */
+		}
+		/* do something interesting with processed events */
 	}
 
 One reason for emptying the queue is that if it gets full you'll start
@@ -181,7 +181,7 @@ at a time using the typical read(2) functionality. For that, you would
 replace the read above with something like
 
 	struct js_event mybuffer[0xff];
-	int i = read (fd, mybuffer, sizeof(struct mybuffer));
+	int i = read (fd, mybuffer, sizeof(mybuffer));
 
 In this case, read would return -1 if the queue was empty, or some
 other value in which the number of events read would be i /
@@ -269,9 +269,9 @@ The driver offers backward compatibility, though. Here's a quick summary:
 	struct JS_DATA_TYPE js;
 	while (1) {
 		if (read (fd, &js, JS_RETURN) != JS_RETURN) {
-	      		/* error */
-	   	}
-	   	usleep (1000);
+			/* error */
+		}
+		usleep (1000);
 	}
 
 As you can figure out from the example, the read returns immediately,
-- 
cgit v1.2.3


From 768d9aa55740754aa4efb8aca594e3841237dd88 Mon Sep 17 00:00:00 2001
From: Aleksej Makarov <aleksej.makarov@sonymobile.com>
Date: Sat, 23 Nov 2013 10:20:36 -0800
Subject: Input: don't call input_dev_release_keys() in resume

When waking up the platform by pressing a specific key, sending a
release on that key makes it impossible to react on the event in
user-space. This is fixed by moving the input_reset_device() call to
resume instead.

[dmitry.torokhov@gmail.com: make sure we still restore LED/sound state
after resume, handle hibernation properly]

Signed-off-by: Aleksej Makarov <aleksej.makarov@sonymobile.com>
Signed-off-by: Oskar Andero <oskar.andero@sonymobile.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/input.c | 76 ++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 57 insertions(+), 19 deletions(-)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 846ccdd905b1..692435a321af 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1653,35 +1653,36 @@ static void input_dev_toggle(struct input_dev *dev, bool activate)
  */
 void input_reset_device(struct input_dev *dev)
 {
-	mutex_lock(&dev->mutex);
+	unsigned long flags;
 
-	if (dev->users) {
-		input_dev_toggle(dev, true);
+	mutex_lock(&dev->mutex);
+	spin_lock_irqsave(&dev->event_lock, flags);
 
-		/*
-		 * Keys that have been pressed at suspend time are unlikely
-		 * to be still pressed when we resume.
-		 */
-		spin_lock_irq(&dev->event_lock);
-		input_dev_release_keys(dev);
-		spin_unlock_irq(&dev->event_lock);
-	}
+	input_dev_toggle(dev, true);
+	input_dev_release_keys(dev);
 
+	spin_unlock_irqrestore(&dev->event_lock, flags);
 	mutex_unlock(&dev->mutex);
 }
 EXPORT_SYMBOL(input_reset_device);
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int input_dev_suspend(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
-	mutex_lock(&input_dev->mutex);
+	spin_lock_irq(&input_dev->event_lock);
 
-	if (input_dev->users)
-		input_dev_toggle(input_dev, false);
+	/*
+	 * Keys that are pressed now are unlikely to be
+	 * still pressed when we resume.
+	 */
+	input_dev_release_keys(input_dev);
 
-	mutex_unlock(&input_dev->mutex);
+	/* Turn off LEDs and sounds, if any are active. */
+	input_dev_toggle(input_dev, false);
+
+	spin_unlock_irq(&input_dev->event_lock);
 
 	return 0;
 }
@@ -1690,7 +1691,43 @@ static int input_dev_resume(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
-	input_reset_device(input_dev);
+	spin_lock_irq(&input_dev->event_lock);
+
+	/* Restore state of LEDs and sounds, if any were active. */
+	input_dev_toggle(input_dev, true);
+
+	spin_unlock_irq(&input_dev->event_lock);
+
+	return 0;
+}
+
+static int input_dev_freeze(struct device *dev)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+
+	spin_lock_irq(&input_dev->event_lock);
+
+	/*
+	 * Keys that are pressed now are unlikely to be
+	 * still pressed when we resume.
+	 */
+	input_dev_release_keys(input_dev);
+
+	spin_unlock_irq(&input_dev->event_lock);
+
+	return 0;
+}
+
+static int input_dev_poweroff(struct device *dev)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+
+	spin_lock_irq(&input_dev->event_lock);
+
+	/* Turn off LEDs and sounds, if any are active. */
+	input_dev_toggle(input_dev, false);
+
+	spin_unlock_irq(&input_dev->event_lock);
 
 	return 0;
 }
@@ -1698,7 +1735,8 @@ static int input_dev_resume(struct device *dev)
 static const struct dev_pm_ops input_dev_pm_ops = {
 	.suspend	= input_dev_suspend,
 	.resume		= input_dev_resume,
-	.poweroff	= input_dev_suspend,
+	.freeze		= input_dev_freeze,
+	.poweroff	= input_dev_poweroff,
 	.restore	= input_dev_resume,
 };
 #endif /* CONFIG_PM */
@@ -1707,7 +1745,7 @@ static struct device_type input_dev_type = {
 	.groups		= input_dev_attr_groups,
 	.release	= input_dev_release,
 	.uevent		= input_dev_uevent,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	.pm		= &input_dev_pm_ops,
 #endif
 };
-- 
cgit v1.2.3


From c15bdfd5b9831e4cab8cfc118243956e267dd30e Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 16 Dec 2013 07:09:25 -0800
Subject: Input: elantech -  improve clickpad detection

The current assumption in the elantech driver that hw version 3 touchpads
are never clickpads and hw version 4 touchpads are always clickpads is
wrong.

There are several bug reports for this, ie:
https://bugzilla.redhat.com/show_bug.cgi?id=1030802
http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux

I've spend a couple of hours wading through various bugzillas, launchpads
and forum posts to create a list of fw-versions and capabilities for
different laptop models to find a good method to differentiate between
clickpads and versions with separate hardware buttons.

Which shows that a device being a clickpad is reliable indicated by bit 12
being set in the fw_version. I've included the gathered list inside the
driver, so that we've this info at hand if we need to revisit this later.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/mouse/elantech.c | 45 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 3 deletions(-)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 597e9b8fc18d..ef1cf52f8bb9 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -486,6 +486,7 @@ static void elantech_input_sync_v4(struct psmouse *psmouse)
 	unsigned char *packet = psmouse->packet;
 
 	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
 	input_mt_report_pointer_emulation(dev, true);
 	input_sync(dev);
 }
@@ -983,6 +984,44 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
 	return 0;
 }
 
+/*
+ * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in
+ * fw_version for this is based on the following fw_version & caps table:
+ *
+ * Laptop-model:           fw_version:     caps:           buttons:
+ * Acer S3                 0x461f00        10, 13, 0e      clickpad
+ * Acer S7-392             0x581f01        50, 17, 0d      clickpad
+ * Acer V5-131             0x461f02        01, 16, 0c      clickpad
+ * Acer V5-551             0x461f00        ?               clickpad
+ * Asus K53SV              0x450f01        78, 15, 0c      2 hw buttons
+ * Asus G46VW              0x460f02        00, 18, 0c      2 hw buttons
+ * Asus G750JX             0x360f00        00, 16, 0c      2 hw buttons
+ * Asus UX31               0x361f00        20, 15, 0e      clickpad
+ * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
+ * Avatar AVIU-145A2       0x361f00        ?               clickpad
+ * Gigabyte U2442          0x450f01        58, 17, 0c      2 hw buttons
+ * Lenovo L430             0x350f02        b9, 15, 0c      2 hw buttons (*)
+ * Samsung NF210           0x150b00        78, 14, 0a      2 hw buttons
+ * Samsung NP770Z5E        0x575f01        10, 15, 0f      clickpad
+ * Samsung NP700Z5B        0x361f06        21, 15, 0f      clickpad
+ * Samsung NP900X3E-A02    0x575f03        ?               clickpad
+ * Samsung NP-QX410        0x851b00        19, 14, 0c      clickpad
+ * Samsung RC512           0x450f00        08, 15, 0c      2 hw buttons
+ * Samsung RF710           0x450f00        ?               2 hw buttons
+ * System76 Pangolin       0x250f01        ?               2 hw buttons
+ * (*) + 3 trackpoint buttons
+ */
+static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct elantech_data *etd = psmouse->private;
+
+	if (etd->fw_version & 0x001000) {
+		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
+		__clear_bit(BTN_RIGHT, dev->keybit);
+	}
+}
+
 /*
  * Set the appropriate event bits for the input subsystem
  */
@@ -1026,6 +1065,8 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
 		/* fall through */
 	case 3:
+		if (etd->hw_version == 3)
+			elantech_set_buttonpad_prop(psmouse);
 		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
 		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
 		if (etd->reports_pressure) {
@@ -1047,9 +1088,7 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 			 */
 			psmouse_warn(psmouse, "couldn't query resolution data.\n");
 		}
-		/* v4 is clickpad, with only one button. */
-		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
-		__clear_bit(BTN_RIGHT, dev->keybit);
+		elantech_set_buttonpad_prop(psmouse);
 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
 		/* For X to recognize me as touchpad. */
 		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
-- 
cgit v1.2.3


From 3c4396b434613f653bf95f741a6000e671d1e011 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Tue, 17 Dec 2013 08:58:18 -0800
Subject: Input: zforce - fix error return code in zforce_start()

The error code was not set if unable to set config, so the error
condition wasn't reflected in the return value. Fix to return a
negative error code from the error handling case instead of 0.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/zforce_ts.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
index 75762d6ff3ba..4ffe4cc3b234 100644
--- a/drivers/input/touchscreen/zforce_ts.c
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -279,7 +279,8 @@ static int zforce_start(struct zforce_ts *ts)
 		goto error;
 	}
 
-	if (zforce_setconfig(ts, SETCONFIG_DUALTOUCH)) {
+	ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH);
+	if (ret) {
 		dev_err(&client->dev, "Unable to set config\n");
 		goto error;
 	}
-- 
cgit v1.2.3


From 01d08185850c2eb5ce80722df3fdb5d7a291fb79 Mon Sep 17 00:00:00 2001
From: Antonio Ospite <ospite@studenti.unina.it>
Date: Wed, 18 Dec 2013 08:39:10 -0800
Subject: Input: fix typos in Documentation/input/gamepad.txt

Fix some typos and while at it also use "PS" as the name for the central
"HOME" button on Sony controllers, this is how Sony itself calls it.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/input/gamepad.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/input/gamepad.txt b/Documentation/input/gamepad.txt
index 31bb6a4029ef..3f6d8a5e9cdc 100644
--- a/Documentation/input/gamepad.txt
+++ b/Documentation/input/gamepad.txt
@@ -68,7 +68,7 @@ features that you need, first. How each feature is mapped is described below.
 Legacy drivers often don't comply to these rules. As we cannot change them
 for backwards-compatibility reasons, you need to provide fixup mappings in
 user-space yourself. Some of them might also provide module-options that
-change the mappings so you can adivce users to set these.
+change the mappings so you can advise users to set these.
 
 All new gamepads are supposed to comply with this mapping. Please report any
 bugs, if they don't.
@@ -150,10 +150,10 @@ Menu-Pad:
                   BTN_START
   Many pads also have a third button which is branded or has a special symbol
   and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo
-  "HOME" button, the XBox "X"-button or Sony "P" button.
+  "HOME" button, the XBox "X"-button or Sony "PS" button.
 
 Rumble:
-  Rumble is adverticed as FF_RUMBLE.
+  Rumble is advertised as FF_RUMBLE.
 
 ----------------------------------------------------------------------------
   Written 2013 by David Herrmann <dh.herrmann@gmail.com>
-- 
cgit v1.2.3


From ee65d4b36de8ddf4467f788faa5d8ddd1bfcdaa2 Mon Sep 17 00:00:00 2001
From: Yunkang Tang <tommywill2011@gmail.com>
Date: Thu, 26 Dec 2013 14:54:19 -0800
Subject: Input: ALPS - add support for "Dolphin" devices

This adds support for another flavor of ALPS protocol used in newer
"Dolphin" devices.

Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/mouse/alps.c | 214 ++++++++++++++++++++++++++++++++++++---------
 drivers/input/mouse/alps.h |   7 +-
 2 files changed, 179 insertions(+), 42 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 5cf62e315218..fb15c64ffb95 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -276,6 +276,57 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
+/*
+ * Process bitmap data for V5 protocols. Return value is null.
+ *
+ * The bitmaps don't have enough data to track fingers, so this function
+ * only generates points representing a bounding box of at most two contacts.
+ * These two points are returned in x1, y1, x2, and y2.
+ */
+static void alps_process_bitmap_dolphin(struct alps_data *priv,
+					struct alps_fields *fields,
+					int *x1, int *y1, int *x2, int *y2)
+{
+	int box_middle_x, box_middle_y;
+	unsigned int x_map, y_map;
+	unsigned char start_bit, end_bit;
+	unsigned char x_msb, x_lsb, y_msb, y_lsb;
+
+	x_map = fields->x_map;
+	y_map = fields->y_map;
+
+	if (!x_map || !y_map)
+		return;
+
+	/* Get Most-significant and Least-significant bit */
+	x_msb = fls(x_map);
+	x_lsb = ffs(x_map);
+	y_msb = fls(y_map);
+	y_lsb = ffs(y_map);
+
+	/* Most-significant bit should never exceed max sensor line number */
+	if (x_msb > priv->x_bits || y_msb > priv->y_bits)
+		return;
+
+	*x1 = *y1 = *x2 = *y2 = 0;
+
+	if (fields->fingers > 1) {
+		start_bit = priv->x_bits - x_msb;
+		end_bit = priv->x_bits - x_lsb;
+		box_middle_x = (priv->x_max * (start_bit + end_bit)) /
+				(2 * (priv->x_bits - 1));
+
+		start_bit = y_lsb - 1;
+		end_bit = y_msb - 1;
+		box_middle_y = (priv->y_max * (start_bit + end_bit)) /
+				(2 * (priv->y_bits - 1));
+		*x1 = fields->x;
+		*y1 = fields->y;
+		*x2 = 2 * box_middle_x - *x1;
+		*y2 = 2 * box_middle_y - *y1;
+	}
+}
+
 /*
  * Process bitmap data from v3 and v4 protocols. Returns the number of
  * fingers detected. A return value of 0 means at least one of the
@@ -481,7 +532,8 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
 	f->ts_middle = !!(p[3] & 0x40);
 }
 
-static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
+static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
+				 struct psmouse *psmouse)
 {
 	f->first_mp = !!(p[4] & 0x40);
 	f->is_mp = !!(p[0] & 0x40);
@@ -502,48 +554,61 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
 	alps_decode_buttons_v3(f, p);
 }
 
-static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
+static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
+				 struct psmouse *psmouse)
 {
-	alps_decode_pinnacle(f, p);
+	alps_decode_pinnacle(f, p, psmouse);
 
 	f->x_map |= (p[5] & 0x10) << 11;
 	f->y_map |= (p[5] & 0x20) << 6;
 }
 
-static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
+				struct psmouse *psmouse)
 {
+	u64 palm_data = 0;
+	struct alps_data *priv = psmouse->private;
+
 	f->first_mp = !!(p[0] & 0x02);
 	f->is_mp = !!(p[0] & 0x20);
 
-	f->fingers = ((p[0] & 0x6) >> 1 |
+	if (!f->is_mp) {
+		f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+		f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+		f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+		alps_decode_buttons_v3(f, p);
+	} else {
+		f->fingers = ((p[0] & 0x6) >> 1 |
 		     (p[0] & 0x10) >> 2);
-	f->x_map = ((p[2] & 0x60) >> 5) |
-		   ((p[4] & 0x7f) << 2) |
-		   ((p[5] & 0x7f) << 9) |
-		   ((p[3] & 0x07) << 16) |
-		   ((p[3] & 0x70) << 15) |
-		   ((p[0] & 0x01) << 22);
-	f->y_map = (p[1] & 0x7f) |
-		   ((p[2] & 0x1f) << 7);
-
-	f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
-	f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
-	f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
 
-	alps_decode_buttons_v3(f, p);
+		palm_data = (p[1] & 0x7f) |
+			    ((p[2] & 0x7f) << 7) |
+			    ((p[4] & 0x7f) << 14) |
+			    ((p[5] & 0x7f) << 21) |
+			    ((p[3] & 0x07) << 28) |
+			    (((u64)p[3] & 0x70) << 27) |
+			    (((u64)p[0] & 0x01) << 34);
+
+		/* Y-profile is stored in P(0) to p(n-1), n = y_bits; */
+		f->y_map = palm_data & (BIT(priv->y_bits) - 1);
+
+		/* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */
+		f->x_map = (palm_data >> priv->y_bits) &
+			   (BIT(priv->x_bits) - 1);
+	}
 }
 
-static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
+static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	struct input_dev *dev = psmouse->dev;
 	struct input_dev *dev2 = priv->dev2;
 	int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
-	int fingers = 0, bmap_fingers;
-	struct alps_fields f;
+	int fingers = 0, bmap_fn;
+	struct alps_fields f = {0};
 
-	priv->decode_fields(&f, packet);
+	priv->decode_fields(&f, packet, psmouse);
 
 	/*
 	 * There's no single feature of touchpad position and bitmap packets
@@ -560,19 +625,38 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 		 */
 		if (f.is_mp) {
 			fingers = f.fingers;
-			bmap_fingers = alps_process_bitmap(priv,
-							   f.x_map, f.y_map,
-							   &x1, &y1, &x2, &y2);
-
-			/*
-			 * We shouldn't report more than one finger if
-			 * we don't have two coordinates.
-			 */
-			if (fingers > 1 && bmap_fingers < 2)
-				fingers = bmap_fingers;
-
-			/* Now process position packet */
-			priv->decode_fields(&f, priv->multi_data);
+			if (priv->proto_version == ALPS_PROTO_V3) {
+				bmap_fn = alps_process_bitmap(priv, f.x_map,
+							      f.y_map, &x1, &y1,
+							      &x2, &y2);
+
+				/*
+				 * We shouldn't report more than one finger if
+				 * we don't have two coordinates.
+				 */
+				if (fingers > 1 && bmap_fn < 2)
+					fingers = bmap_fn;
+
+				/* Now process position packet */
+				priv->decode_fields(&f, priv->multi_data,
+						    psmouse);
+			} else {
+				/*
+				 * Because Dolphin uses position packet's
+				 * coordinate data as Pt1 and uses it to
+				 * calculate Pt2, so we need to do position
+				 * packet decode first.
+				 */
+				priv->decode_fields(&f, priv->multi_data,
+						    psmouse);
+
+				/*
+				 * Since Dolphin's finger number is reliable,
+				 * there is no need to compare with bmap_fn.
+				 */
+				alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
+							    &x2, &y2);
+			}
 		} else {
 			priv->multi_packet = 0;
 		}
@@ -662,7 +746,7 @@ static void alps_process_packet_v3(struct psmouse *psmouse)
 		return;
 	}
 
-	alps_process_touchpad_packet_v3(psmouse);
+	alps_process_touchpad_packet_v3_v5(psmouse);
 }
 
 static void alps_process_packet_v6(struct psmouse *psmouse)
@@ -1709,6 +1793,52 @@ error:
 	return -1;
 }
 
+static int alps_dolphin_get_device_area(struct psmouse *psmouse,
+					struct alps_data *priv)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[4] = {0};
+	int num_x_electrode, num_y_electrode;
+
+	if (alps_enter_command_mode(psmouse))
+		return -1;
+
+	param[0] = 0x0a;
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
+	    ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE))
+		return -1;
+
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+		return -1;
+
+	/*
+	 * Dolphin's sensor line number is not fixed. It can be calculated
+	 * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET.
+	 * Further more, we can get device's x_max and y_max by multiplying
+	 * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE.
+	 *
+	 * e.g. When we get register's sensor_x = 11 & sensor_y = 8,
+	 *	real sensor line number X = 11 + 8 = 19, and
+	 *	real sensor line number Y = 8 + 1 = 9.
+	 *	So, x_max = (19 - 1) * 64 = 1152, and
+	 *	    y_max = (9 - 1) * 64 = 512.
+	 */
+	num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F);
+	num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F);
+	priv->x_bits = num_x_electrode;
+	priv->y_bits = num_y_electrode;
+	priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
+	priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
+
+	if (alps_exit_command_mode(psmouse))
+		return -1;
+
+	return 0;
+}
+
 static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
@@ -1763,13 +1893,13 @@ static void alps_set_defaults(struct alps_data *priv)
 		break;
 	case ALPS_PROTO_V5:
 		priv->hw_init = alps_hw_init_dolphin_v1;
-		priv->process_packet = alps_process_packet_v3;
+		priv->process_packet = alps_process_touchpad_packet_v3_v5;
 		priv->decode_fields = alps_decode_dolphin;
 		priv->set_abs_params = alps_set_abs_params_mt;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
 		priv->byte0 = 0xc8;
-		priv->mask0 = 0xc8;
+		priv->mask0 = 0xd8;
 		priv->flags = 0;
 		priv->x_max = 1360;
 		priv->y_max = 660;
@@ -1845,11 +1975,13 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 	if (alps_match_table(psmouse, priv, e7, ec) == 0) {
 		return 0;
 	} else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
-		   ec[0] == 0x73 && ec[1] == 0x01) {
+		   ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
 		priv->proto_version = ALPS_PROTO_V5;
 		alps_set_defaults(priv);
-
-		return 0;
+		if (alps_dolphin_get_device_area(psmouse, priv))
+			return -EIO;
+		else
+			return 0;
 	} else if (ec[0] == 0x88 && ec[1] == 0x08) {
 		priv->proto_version = ALPS_PROTO_V3;
 		alps_set_defaults(priv);
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 704f0f924307..03f88b6940c7 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -19,6 +19,10 @@
 #define ALPS_PROTO_V5	5
 #define ALPS_PROTO_V6	6
 
+#define DOLPHIN_COUNT_PER_ELECTRODE	64
+#define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
+#define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
+
 /**
  * struct alps_model_info - touchpad ID table
  * @signature: E7 response string to match.
@@ -146,7 +150,8 @@ struct alps_data {
 
 	int (*hw_init)(struct psmouse *psmouse);
 	void (*process_packet)(struct psmouse *psmouse);
-	void (*decode_fields)(struct alps_fields *f, unsigned char *p);
+	void (*decode_fields)(struct alps_fields *f, unsigned char *p,
+			      struct psmouse *psmouse);
 	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
 
 	int prev_fin;
-- 
cgit v1.2.3


From e77a715ac3af14d16c027caebdb0ce5412976b9e Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Tue, 17 Dec 2013 09:03:05 -0800
Subject: Input: pmic8xxx-pwrkey - pass correct device identity to free_irq()

free_irq() in the error handling case is missing when change
pass input device directly to interrupt.

Fixes: b27f8fee4965('Input: pmic8xxx-pwrkey - pass input device directly to interrupt')

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/pmic8xxx-pwrkey.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index ef938405a9c6..3914e5ba05a1 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -182,7 +182,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	return 0;
 
 free_press_irq:
-	free_irq(key_press_irq, pwrkey);
+	free_irq(key_press_irq, pwr);
 unreg_input_dev:
 	input_unregister_device(pwr);
 	pwr = NULL;
-- 
cgit v1.2.3


From eb735d3b841b42fd56d6bfb4039d61aa0fc3cf8d Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sun, 15 Dec 2013 03:28:26 -0800
Subject: Input: pmic8xxx-pwrkey - switch to using managed resources

This simplifies error handling and device removal paths.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/pmic8xxx-pwrkey.c | 74 ++++++++++++------------------------
 1 file changed, 25 insertions(+), 49 deletions(-)

diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index 3914e5ba05a1..aaf332510623 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -32,7 +32,6 @@
  * @key_press_irq: key press irq number
  */
 struct pmic8xxx_pwrkey {
-	struct input_dev *pwr;
 	int key_press_irq;
 };
 
@@ -110,22 +109,22 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	pwrkey = kzalloc(sizeof(*pwrkey), GFP_KERNEL);
+	pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
 	if (!pwrkey)
 		return -ENOMEM;
 
-	pwr = input_allocate_device();
+	pwrkey->key_press_irq = key_press_irq;
+
+	pwr = devm_input_allocate_device(&pdev->dev);
 	if (!pwr) {
 		dev_dbg(&pdev->dev, "Can't allocate power button\n");
-		err = -ENOMEM;
-		goto free_pwrkey;
+		return -ENOMEM;
 	}
 
 	input_set_capability(pwr, EV_KEY, KEY_POWER);
 
 	pwr->name = "pmic8xxx_pwrkey";
 	pwr->phys = "pmic8xxx_pwrkey/input0";
-	pwr->dev.parent = &pdev->dev;
 
 	delay = (pdata->kpd_trigger_delay_us << 10) / USEC_PER_SEC;
 	delay = 1 + ilog2(delay);
@@ -133,7 +132,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed reading PON_CNTL_1 err=%d\n", err);
-		goto free_input_dev;
+		return err;
 	}
 
 	pon_cntl &= ~PON_CNTL_TRIG_DELAY_MASK;
@@ -146,66 +145,43 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	err = regmap_write(regmap, PON_CNTL_1, pon_cntl);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed writing PON_CNTL_1 err=%d\n", err);
-		goto free_input_dev;
+		return err;
 	}
 
-	err = input_register_device(pwr);
+	err = devm_request_irq(&pdev->dev, key_press_irq, pwrkey_press_irq,
+			       IRQF_TRIGGER_RISING,
+			       "pmic8xxx_pwrkey_press", pwr);
 	if (err) {
-		dev_dbg(&pdev->dev, "Can't register power key: %d\n", err);
-		goto free_input_dev;
+		dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
+			key_press_irq, err);
+		return err;
 	}
 
-	pwrkey->key_press_irq = key_press_irq;
-	pwrkey->pwr = pwr;
-
-	platform_set_drvdata(pdev, pwrkey);
-
-	err = request_irq(key_press_irq, pwrkey_press_irq,
-		IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_press", pwr);
-	if (err < 0) {
-		dev_dbg(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
-				 key_press_irq, err);
-		goto unreg_input_dev;
+	err = devm_request_irq(&pdev->dev, key_release_irq, pwrkey_release_irq,
+			       IRQF_TRIGGER_RISING,
+			       "pmic8xxx_pwrkey_release", pwr);
+	if (err) {
+		dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
+			key_release_irq, err);
+		return err;
 	}
 
-	err = request_irq(key_release_irq, pwrkey_release_irq,
-		 IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_release", pwr);
-	if (err < 0) {
-		dev_dbg(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
-				 key_release_irq, err);
-
-		goto free_press_irq;
+	err = input_register_device(pwr);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register power key: %d\n", err);
+		return err;
 	}
 
+	platform_set_drvdata(pdev, pwrkey);
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 
 	return 0;
-
-free_press_irq:
-	free_irq(key_press_irq, pwr);
-unreg_input_dev:
-	input_unregister_device(pwr);
-	pwr = NULL;
-free_input_dev:
-	input_free_device(pwr);
-free_pwrkey:
-	kfree(pwrkey);
-	return err;
 }
 
 static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
 {
-	struct pmic8xxx_pwrkey *pwrkey = platform_get_drvdata(pdev);
-	int key_release_irq = platform_get_irq(pdev, 0);
-	int key_press_irq = platform_get_irq(pdev, 1);
-
 	device_init_wakeup(&pdev->dev, 0);
 
-	free_irq(key_press_irq, pwrkey->pwr);
-	free_irq(key_release_irq, pwrkey->pwr);
-	input_unregister_device(pwrkey->pwr);
-	kfree(pwrkey);
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 4e353edf840efe687d3f83cf480666b4626de4ab Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Fri, 27 Dec 2013 17:13:17 -0800
Subject: Input: keypad-ep93xx - cleanup header file

Commit a3b2924547a7 ("ARM: ep93xx: move platform_data definitions")
moved the file to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 include/linux/platform_data/keypad-ep93xx.h | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h
index 1e2f4e97f428..adccee25b162 100644
--- a/include/linux/platform_data/keypad-ep93xx.h
+++ b/include/linux/platform_data/keypad-ep93xx.h
@@ -1,9 +1,5 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
+#ifndef __KEYPAD_EP93XX_H
+#define __KEYPAD_EP93XX_H
 
 struct matrix_keymap_data;
 
@@ -32,4 +28,4 @@ struct ep93xx_keypad_platform_data {
 #define EP93XX_MATRIX_ROWS		(8)
 #define EP93XX_MATRIX_COLS		(8)
 
-#endif	/* __ASM_ARCH_EP93XX_KEYPAD_H */
+#endif	/* __KEYPAD_EP93XX_H */
-- 
cgit v1.2.3


From b38b4b4f8c4aa8e29f7cf8af2716fb3f9c867207 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Fri, 27 Dec 2013 17:13:45 -0800
Subject: Input: keypad-omap - cleanup header file

Commit 2203747c9771 ("ARM: omap: move platform_data definitions")
moved the file to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 include/linux/platform_data/keypad-omap.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h
index a6b21eddb212..c3a3abae98f0 100644
--- a/include/linux/platform_data/keypad-omap.h
+++ b/include/linux/platform_data/keypad-omap.h
@@ -1,14 +1,12 @@
 /*
- *  arch/arm/plat-omap/include/mach/keypad.h
- *
  *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
+#ifndef __KEYPAD_OMAP_H
+#define __KEYPAD_OMAP_H
 
 #ifndef CONFIG_ARCH_OMAP1
 #warning Please update the board to use matrix-keypad driver
-- 
cgit v1.2.3


From 64757eba624422f8d30e4248f6f10719ac8b2311 Mon Sep 17 00:00:00 2001
From: Doug Anderson <dianders@chromium.org>
Date: Sun, 29 Dec 2013 16:52:46 -0800
Subject: Input: cros_ec_keyb - fix problems with backslash

The driver can't deal with two entries its keymap having the same keycode.
When this happens it will get confused about whether the key is down or up
and will cause some screwy behavior.

We need to have two entries for KEY_BACKSLASH to handle US and UK
keyboards. Specifically:
* On the US keyboard the backslash key (above enter) is r3 c11 and is
  supposed to be reported as BACKSLASH.
* On the UK keyboard the # key (left of enter) is r4 c10 and is
  supposed to be reported as BACKSLASH.
* On the UK keyboard the \ key (left of Z) is r2 c7 and is supposed to
  be reported as KEY_102ND.

Note that both keyboards (US and UK) have only one physical backslash
key so the constraint that each physical key should have its own keycode
still stands.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/keyboard/cros_ec_keyb.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 7e8b0a52af25..408379669d3c 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -38,6 +38,7 @@
  * @row_shift: log2 or number of rows, rounded up
  * @keymap_data: Matrix keymap data used to convert to keyscan values
  * @ghost_filter: true to enable the matrix key-ghosting filter
+ * @old_kb_state: bitmap of keys pressed last scan
  * @dev: Device pointer
  * @idev: Input device
  * @ec: Top level ChromeOS device to use to talk to EC
@@ -49,6 +50,7 @@ struct cros_ec_keyb {
 	int row_shift;
 	const struct matrix_keymap_data *keymap_data;
 	bool ghost_filter;
+	uint8_t *old_kb_state;
 
 	struct device *dev;
 	struct input_dev *idev;
@@ -135,6 +137,7 @@ static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
 	struct input_dev *idev = ckdev->idev;
 	int col, row;
 	int new_state;
+	int old_state;
 	int num_cols;
 
 	num_cols = len;
@@ -153,18 +156,19 @@ static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
 		for (row = 0; row < ckdev->rows; row++) {
 			int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
 			const unsigned short *keycodes = idev->keycode;
-			int code;
 
-			code = keycodes[pos];
 			new_state = kb_state[col] & (1 << row);
-			if (!!new_state != test_bit(code, idev->key)) {
+			old_state = ckdev->old_kb_state[col] & (1 << row);
+			if (new_state != old_state) {
 				dev_dbg(ckdev->dev,
 					"changed: [r%d c%d]: byte %02x\n",
 					row, col, new_state);
 
-				input_report_key(idev, code, new_state);
+				input_report_key(idev, keycodes[pos],
+						 new_state);
 			}
 		}
+		ckdev->old_kb_state[col] = kb_state[col];
 	}
 	input_sync(ckdev->idev);
 }
@@ -226,6 +230,9 @@ static int cros_ec_keyb_probe(struct platform_device *pdev)
 					    &ckdev->cols);
 	if (err)
 		return err;
+	ckdev->old_kb_state = devm_kzalloc(&pdev->dev, ckdev->cols, GFP_KERNEL);
+	if (!ckdev->old_kb_state)
+		return -ENOMEM;
 
 	idev = devm_input_allocate_device(&pdev->dev);
 	if (!idev)
-- 
cgit v1.2.3


From dbb48007a016f48f7fc19d8af753bae8b9c15816 Mon Sep 17 00:00:00 2001
From: Thomaz de Oliveira dos Reis <thor27@gmail.com>
Date: Thu, 2 Jan 2014 15:38:45 -0800
Subject: Input: xpad - change D-PAD mapping on Razer devices

When using Razer Onza controller the dpad doesn't work in many games
because D-PAD was mapped to buttons (useful for dance pads) and not to
HAT0X/Y axis.

ers who really want to have it mapped to buttons can restore previous
behavior by using 'dpad_to_buttons' module option.

Signed-off-by: Thomaz de Oliveira dos Reis <thor27@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/joystick/xpad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 75e3b102ce45..7995e1fe3061 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -166,8 +166,8 @@ static const struct xpad_device {
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
-	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
+	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
-- 
cgit v1.2.3


From 8e2f2325b73f3e5e46ecffd291556f33b8e3f8c9 Mon Sep 17 00:00:00 2001
From: Petr Sebor <petr@scssoft.com>
Date: Thu, 2 Jan 2014 15:35:07 -0800
Subject: Input: xpad - add new USB IDs for Logitech F310 and F710

This enables the rumble force feedback on the F710 unit since
it is no longer treated as XTYPE_UNKNOWN type.

Signed-off-by: Petr Sebor <petr@scssoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 7995e1fe3061..995e79fa7dad 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -125,6 +125,8 @@ static const struct xpad_device {
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+	{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
+	{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
-- 
cgit v1.2.3


From 77b2d07ac8142a1e35b69681b0beeb6845fbcf0b Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:27:31 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on alpha

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/alpha/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index d39dc9b95a2c..7ce5ce586bd9 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -2,6 +2,7 @@ config ALPHA
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_AOUT
 	select HAVE_IDE
 	select HAVE_OPROFILE
-- 
cgit v1.2.3


From 74072b301fb8bd0007a412e83646fcb14e7bd89e Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:28:54 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on ARM/Footbridge

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/arm/mach-footbridge/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index 0f2111a11315..fba55fb9f47d 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -85,6 +85,7 @@ config FOOTBRIDGE
 # Footbridge in host mode
 config FOOTBRIDGE_HOST
 	bool
+	select ARCH_MIGHT_HAVE_PC_SERIO
 
 # Footbridge in addin mode
 config FOOTBRIDGE_ADDIN
-- 
cgit v1.2.3


From bbc4e596985fb589388338b85f60da256b8bc27b Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:31:12 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on IA64

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/ia64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 4e4119b0e691..f7337aab201a 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -7,6 +7,7 @@ menu "Processor type and features"
 config IA64
 	bool
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select PCI if (!IA64_HP_SIM)
 	select ACPI if (!IA64_HP_SIM)
 	select PM if (!IA64_HP_SIM)
-- 
cgit v1.2.3


From 393c1262b9c87db09eb21b063f1f1215e02c6bfb Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:32:00 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on mips

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 650de3976e7a..99db162fdc40 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2,6 +2,7 @@ config MIPS
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
-- 
cgit v1.2.3


From c74e6d3de9d2143025aacb701d81381a9815ee51 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:32:26 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on powerpc

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/powerpc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b44b52c0a8f0..fb75485e5213 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -86,6 +86,7 @@ config PPC
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select BINFMT_ELF
 	select OF
 	select OF_EARLY_FLATTREE
-- 
cgit v1.2.3


From 82ef5b89a802094ea93ebd6b2e9b0669671f2330 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:32:52 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO for SH_CAYMAN

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO. Cayman board
is only sh board which needs this.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/sh/boards/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index fb5805745ace..eb1cf84231a2 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -321,6 +321,7 @@ config SH_CAYMAN
 	bool "Hitachi Cayman"
 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
 	select SYS_SUPPORTS_PCI
+	select ARCH_MIGHT_HAVE_PC_SERIO
 
 config SH_POLARIS
 	bool "SMSC Polaris"
-- 
cgit v1.2.3


From a5252c28697418bf298873762d5a694bdf5f2948 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:33:21 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on sparc

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/sparc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index d4f7a6a163dc..034a680ffec2 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -13,6 +13,7 @@ config SPARC
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select OF
 	select OF_PROMTREE
 	select HAVE_IDE
-- 
cgit v1.2.3


From d444b03bfe5df11063e01690ea21bec80b60bb46 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:33:53 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on unicore32

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/unicore32/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index a7ba27b2752b..25c0dba508cc 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -1,6 +1,7 @@
 config UNICORE32
 	def_bool y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_MEMBLOCK
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_DMA_ATTRS
-- 
cgit v1.2.3


From 5e2c18c0ed708e2a53f3e0673a786b6df2fb56fb Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:34:16 -0800
Subject: Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on x86

Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e903c71f7e69..b7f090377586 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,6 +23,7 @@ config X86
 	def_bool y
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_AOUT if X86_32
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select ARCH_SUPPORTS_NUMA_BALANCING
-- 
cgit v1.2.3


From 5cd3f8f89c38c2681a67290b6a463b12c2aede9e Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Wed, 1 Jan 2014 11:34:39 -0800
Subject: Input: i8042 - cleanup SERIO_I8042 dependencies

Remove messy dependencies from SERIO_I8042 by having it depend on one
Kconfig symbol (ARCH_MIGHT_HAVE_PC_SERIO) and having architectures
which need it select ARCH_MIGHT_HAVE_PC_SERIO in arch/*/Kconfig.
New architectures are unlikely to need SERIO_I8042, so this avoids
having an ever growing list of architectures to exclude.

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/serio/Kconfig | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 8541f949778d..aec54e283580 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -16,14 +16,19 @@ config SERIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called serio.
 
+config ARCH_MIGHT_HAVE_PC_SERIO
+	bool
+	help
+	  Select this config option from the architecture Kconfig if
+	  the architecture might use a PC serio device (i8042) to
+	  communicate with keyboard, mouse, etc.
+
 if SERIO
 
 config SERIO_I8042
 	tristate "i8042 PC Keyboard controller"
 	default y
-	depends on !PARISC && (!ARM || FOOTBRIDGE_HOST) && \
-		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 && \
-		   !ARC
+	depends on ARCH_MIGHT_HAVE_PC_SERIO
 	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
-- 
cgit v1.2.3


From a9e1d3c04a26bf9fdd9197cee61fa3a17778eb85 Mon Sep 17 00:00:00 2001
From: Libo Chen <clbchenlibo.chen@huawei.com>
Date: Fri, 3 Jan 2014 23:58:32 -0800
Subject: Input: twl4030-vibra - add missing of_node_put

We should drop reference to twl6040_core_node device_node once we are done
using it.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/twl4030-vibra.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index d993775a7c39..960ef2a70910 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -185,8 +185,10 @@ static bool twl4030_vibra_check_coexist(struct twl4030_vibra_data *pdata,
 	if (pdata && pdata->coexist)
 		return true;
 
-	if (of_find_node_by_name(node, "codec"))
+	if (of_find_node_by_name(node, "codec")) {
+		of_node_put(node);
 		return true;
+	}
 
 	return false;
 }
-- 
cgit v1.2.3


From f048dd1725c85356517c90f7ecf6bdd9f47d4bf3 Mon Sep 17 00:00:00 2001
From: Libo Chen <clbchenlibo.chen@huawei.com>
Date: Sat, 4 Jan 2014 00:00:30 -0800
Subject: Input: twl6040-vibra - add missing of_node_put

We should drop reference to twl6040_core_node device_node once we are done
using it.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/twl6040-vibra.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 7864b0c3ebb3..89bca7647f54 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -276,6 +276,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info) {
+		of_node_put(twl6040_core_node);
 		dev_err(&pdev->dev, "couldn't allocate memory\n");
 		return -ENOMEM;
 	}
@@ -295,6 +296,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
 	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
 
+	of_node_put(twl6040_core_node);
+
 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
-- 
cgit v1.2.3


From 7abf38d6d13c9e3e3b9e4d7d8d7a68a353279d11 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Sat, 4 Jan 2014 00:41:03 -0800
Subject: Input: twl4030-keypad - add device tree support

Add device tree support for twl4030 keypad driver.

Tested on Nokia N900.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/twl4030-keypad.txt   | 27 +++++++++
 drivers/input/keyboard/twl4030_keypad.c            | 67 ++++++++++++++++------
 2 files changed, 77 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/twl4030-keypad.txt

diff --git a/Documentation/devicetree/bindings/input/twl4030-keypad.txt b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
new file mode 100644
index 000000000000..e4be2f76a717
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
@@ -0,0 +1,27 @@
+* TWL4030's Keypad Controller device tree bindings
+
+TWL4030's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+ * keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad
+      controller.
+- interrupt: should be one of the following
+   - <1>: For controllers compatible with twl4030 keypad controller.
+
+Example:
+	twl_keypad: keypad {
+		compatible = "ti,twl4030-keypad";
+		interrupts = <1>;
+		keypad,num-rows = <8>;
+		keypad,num-columns = <8>;
+	};
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 8bc2879b4c87..f663c1953bad 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -33,6 +33,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 /*
  * The TWL4030 family chips include a keypad controller that supports
@@ -60,6 +61,7 @@
 struct twl4030_keypad {
 	unsigned short	keymap[TWL4030_KEYMAP_SIZE];
 	u16		kp_state[TWL4030_MAX_ROWS];
+	bool		autorepeat;
 	unsigned	n_rows;
 	unsigned	n_cols;
 	unsigned	irq;
@@ -331,20 +333,12 @@ static int twl4030_kp_program(struct twl4030_keypad *kp)
 static int twl4030_kp_probe(struct platform_device *pdev)
 {
 	struct twl4030_keypad_data *pdata = dev_get_platdata(&pdev->dev);
-	const struct matrix_keymap_data *keymap_data;
+	const struct matrix_keymap_data *keymap_data = NULL;
 	struct twl4030_keypad *kp;
 	struct input_dev *input;
 	u8 reg;
 	int error;
 
-	if (!pdata || !pdata->rows || !pdata->cols || !pdata->keymap_data ||
-	    pdata->rows > TWL4030_MAX_ROWS || pdata->cols > TWL4030_MAX_COLS) {
-		dev_err(&pdev->dev, "Invalid platform_data\n");
-		return -EINVAL;
-	}
-
-	keymap_data = pdata->keymap_data;
-
 	kp = kzalloc(sizeof(*kp), GFP_KERNEL);
 	input = input_allocate_device();
 	if (!kp || !input) {
@@ -352,13 +346,9 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	/* Get the debug Device */
-	kp->dbg_dev = &pdev->dev;
-	kp->input = input;
-
-	kp->n_rows = pdata->rows;
-	kp->n_cols = pdata->cols;
-	kp->irq = platform_get_irq(pdev, 0);
+	/* get the debug device */
+	kp->dbg_dev		= &pdev->dev;
+	kp->input		= input;
 
 	/* setup input device */
 	input->name		= "TWL4030 Keypad";
@@ -370,6 +360,40 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	input->id.product	= 0x0001;
 	input->id.version	= 0x0003;
 
+	if (pdata) {
+		if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
+			dev_err(&pdev->dev, "Missing platform_data\n");
+			error = -EINVAL;
+			goto err1;
+		}
+
+		kp->n_rows = pdata->rows;
+		kp->n_cols = pdata->cols;
+		kp->autorepeat = pdata->rep;
+		keymap_data = pdata->keymap_data;
+	} else {
+		error = matrix_keypad_parse_of_params(&pdev->dev, &kp->n_rows,
+						      &kp->n_cols);
+		if (error)
+			goto err1;
+
+		kp->autorepeat = true;
+	}
+
+	if (kp->n_rows > TWL4030_MAX_ROWS || kp->n_cols > TWL4030_MAX_COLS) {
+		dev_err(&pdev->dev,
+			"Invalid rows/cols amount specified in platform/devicetree data\n");
+		error = -EINVAL;
+		goto err1;
+	}
+
+	kp->irq = platform_get_irq(pdev, 0);
+	if (!kp->irq) {
+		dev_err(&pdev->dev, "no keyboard irq assigned\n");
+		error = -EINVAL;
+		goto err1;
+	}
+
 	error = matrix_keypad_build_keymap(keymap_data, NULL,
 					   TWL4030_MAX_ROWS,
 					   1 << TWL4030_ROW_SHIFT,
@@ -381,7 +405,7 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
 	/* Enable auto repeat feature of Linux input subsystem */
-	if (pdata->rep)
+	if (kp->autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
 	error = input_register_device(input);
@@ -443,6 +467,14 @@ static int twl4030_kp_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id twl4030_keypad_dt_match_table[] = {
+	{ .compatible = "ti,twl4030-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, twl4030_keypad_dt_match_table);
+#endif
+
 /*
  * NOTE: twl4030 are multi-function devices connected via I2C.
  * So this device is a child of an I2C parent, thus it needs to
@@ -455,6 +487,7 @@ static struct platform_driver twl4030_kp_driver = {
 	.driver		= {
 		.name	= "twl4030_keypad",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl4030_keypad_dt_match_table),
 	},
 };
 module_platform_driver(twl4030_kp_driver);
-- 
cgit v1.2.3


From 32e573c4795f3164cea8fa8942814726c2f33ed3 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sat, 4 Jan 2014 00:08:49 -0800
Subject: Input: twl6040-vibra - remove unneeded check for CONFIG_OF

Since the driver requires DT now we do not need to check if CONFIG_OF is
defined.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/misc/twl6040-vibra.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 89bca7647f54..77dc23b94eb1 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -258,17 +258,14 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
 static int twl6040_vibra_probe(struct platform_device *pdev)
 {
 	struct device *twl6040_core_dev = pdev->dev.parent;
-	struct device_node *twl6040_core_node = NULL;
+	struct device_node *twl6040_core_node;
 	struct vibra_info *info;
 	int vddvibl_uV = 0;
 	int vddvibr_uV = 0;
 	int ret;
 
-#ifdef CONFIG_OF
 	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
 						 "vibra");
-#endif
-
 	if (!twl6040_core_node) {
 		dev_err(&pdev->dev, "parent of node is missing?\n");
 		return -EINVAL;
-- 
cgit v1.2.3


From 049f1cb2c115855858ae0b15d559d40296f43d37 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sat, 4 Jan 2014 00:52:48 -0800
Subject: Input: twl4030-keypad - convert to using managed resources

Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Tested-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/keyboard/twl4030_keypad.c | 70 +++++++++++----------------------
 1 file changed, 22 insertions(+), 48 deletions(-)

diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index f663c1953bad..71eb0411e379 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -339,12 +339,13 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	u8 reg;
 	int error;
 
-	kp = kzalloc(sizeof(*kp), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!kp || !input) {
-		error = -ENOMEM;
-		goto err1;
-	}
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
 
 	/* get the debug device */
 	kp->dbg_dev		= &pdev->dev;
@@ -353,7 +354,6 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	/* setup input device */
 	input->name		= "TWL4030 Keypad";
 	input->phys		= "twl4030_keypad/input0";
-	input->dev.parent	= &pdev->dev;
 
 	input->id.bustype	= BUS_HOST;
 	input->id.vendor	= 0x0001;
@@ -363,8 +363,7 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	if (pdata) {
 		if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
 			dev_err(&pdev->dev, "Missing platform_data\n");
-			error = -EINVAL;
-			goto err1;
+			return -EINVAL;
 		}
 
 		kp->n_rows = pdata->rows;
@@ -375,7 +374,7 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 		error = matrix_keypad_parse_of_params(&pdev->dev, &kp->n_rows,
 						      &kp->n_cols);
 		if (error)
-			goto err1;
+			return error;
 
 		kp->autorepeat = true;
 	}
@@ -383,15 +382,13 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	if (kp->n_rows > TWL4030_MAX_ROWS || kp->n_cols > TWL4030_MAX_COLS) {
 		dev_err(&pdev->dev,
 			"Invalid rows/cols amount specified in platform/devicetree data\n");
-		error = -EINVAL;
-		goto err1;
+		return -EINVAL;
 	}
 
 	kp->irq = platform_get_irq(pdev, 0);
 	if (!kp->irq) {
 		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		error = -EINVAL;
-		goto err1;
+		return -EINVAL;
 	}
 
 	error = matrix_keypad_build_keymap(keymap_data, NULL,
@@ -400,7 +397,7 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 					   kp->keymap, input);
 	if (error) {
 		dev_err(kp->dbg_dev, "Failed to build keymap\n");
-		goto err1;
+		return error;
 	}
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
@@ -412,12 +409,12 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	if (error) {
 		dev_err(kp->dbg_dev,
 			"Unable to register twl4030 keypad device\n");
-		goto err1;
+		return error;
 	}
 
 	error = twl4030_kp_program(kp);
 	if (error)
-		goto err2;
+		return error;
 
 	/*
 	 * This ISR will always execute in kernel thread context because of
@@ -425,46 +422,24 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	 *
 	 * NOTE:  we assume this host is wired to TWL4040 INT1, not INT2 ...
 	 */
-	error = request_threaded_irq(kp->irq, NULL, do_kp_irq,
-			0, pdev->name, kp);
+	error = devm_request_threaded_irq(&pdev->dev, kp->irq, NULL, do_kp_irq,
+					  0, pdev->name, kp);
 	if (error) {
-		dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n",
-			kp->irq);
-		goto err2;
+		dev_info(kp->dbg_dev, "request_irq failed for irq no=%d: %d\n",
+			kp->irq, error);
+		return error;
 	}
 
 	/* Enable KP and TO interrupts now. */
 	reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
 	if (twl4030_kpwrite_u8(kp, reg, KEYP_IMR1)) {
-		error = -EIO;
-		goto err3;
+		/* mask all events - we don't care about the result */
+		(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
+		return -EIO;
 	}
 
 	platform_set_drvdata(pdev, kp);
 	return 0;
-
-err3:
-	/* mask all events - we don't care about the result */
-	(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
-	free_irq(kp->irq, kp);
-err2:
-	input_unregister_device(input);
-	input = NULL;
-err1:
-	input_free_device(input);
-	kfree(kp);
-	return error;
-}
-
-static int twl4030_kp_remove(struct platform_device *pdev)
-{
-	struct twl4030_keypad *kp = platform_get_drvdata(pdev);
-
-	free_irq(kp->irq, kp);
-	input_unregister_device(kp->input);
-	kfree(kp);
-
-	return 0;
 }
 
 #ifdef CONFIG_OF
@@ -483,7 +458,6 @@ MODULE_DEVICE_TABLE(of, twl4030_keypad_dt_match_table);
 
 static struct platform_driver twl4030_kp_driver = {
 	.probe		= twl4030_kp_probe,
-	.remove		= twl4030_kp_remove,
 	.driver		= {
 		.name	= "twl4030_keypad",
 		.owner	= THIS_MODULE,
-- 
cgit v1.2.3


From bf9a9f8e5105b13cea954b254008f383ed0b4045 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Mon, 6 Jan 2014 10:27:05 -0800
Subject: Input: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/gameport/emu10k1-gp.c          | 1 -
 drivers/input/gameport/fm801-gp.c            | 1 -
 drivers/input/joystick/a3d.c                 | 1 -
 drivers/input/joystick/adi.c                 | 1 -
 drivers/input/joystick/cobra.c               | 1 -
 drivers/input/joystick/gf2k.c                | 1 -
 drivers/input/joystick/grip.c                | 1 -
 drivers/input/joystick/grip_mp.c             | 1 -
 drivers/input/joystick/guillemot.c           | 1 -
 drivers/input/joystick/iforce/iforce.h       | 1 -
 drivers/input/joystick/interact.c            | 1 -
 drivers/input/joystick/joydump.c             | 1 -
 drivers/input/joystick/magellan.c            | 1 -
 drivers/input/joystick/sidewinder.c          | 1 -
 drivers/input/joystick/spaceball.c           | 1 -
 drivers/input/joystick/spaceorb.c            | 1 -
 drivers/input/joystick/stinger.c             | 1 -
 drivers/input/joystick/tmdc.c                | 1 -
 drivers/input/joystick/twidjoy.c             | 1 -
 drivers/input/joystick/warrior.c             | 1 -
 drivers/input/joystick/xpad.c                | 1 -
 drivers/input/joystick/zhenhua.c             | 1 -
 drivers/input/keyboard/adp5520-keys.c        | 1 -
 drivers/input/keyboard/adp5588-keys.c        | 1 -
 drivers/input/keyboard/adp5589-keys.c        | 1 -
 drivers/input/keyboard/bf54x-keys.c          | 1 -
 drivers/input/keyboard/goldfish_events.c     | 1 -
 drivers/input/keyboard/gpio_keys_polled.c    | 1 -
 drivers/input/keyboard/hil_kbd.c             | 1 -
 drivers/input/keyboard/imx_keypad.c          | 1 -
 drivers/input/keyboard/jornada680_kbd.c      | 1 -
 drivers/input/keyboard/jornada720_kbd.c      | 1 -
 drivers/input/keyboard/lkkbd.c               | 1 -
 drivers/input/keyboard/matrix_keypad.c       | 1 -
 drivers/input/keyboard/mcs_touchkey.c        | 1 -
 drivers/input/keyboard/mpr121_touchkey.c     | 1 -
 drivers/input/keyboard/newtonkbd.c           | 1 -
 drivers/input/keyboard/omap-keypad.c         | 1 -
 drivers/input/keyboard/omap4-keypad.c        | 1 -
 drivers/input/keyboard/pxa27x_keypad.c       | 1 -
 drivers/input/keyboard/pxa930_rotary.c       | 1 -
 drivers/input/keyboard/qt1070.c              | 1 -
 drivers/input/keyboard/qt2160.c              | 1 -
 drivers/input/keyboard/samsung-keypad.c      | 1 -
 drivers/input/keyboard/sh_keysc.c            | 1 -
 drivers/input/keyboard/spear-keyboard.c      | 1 -
 drivers/input/keyboard/stmpe-keypad.c        | 1 -
 drivers/input/keyboard/stowaway.c            | 1 -
 drivers/input/keyboard/sunkbd.c              | 1 -
 drivers/input/keyboard/tc3589x-keypad.c      | 1 -
 drivers/input/keyboard/twl4030_keypad.c      | 1 -
 drivers/input/keyboard/w90p910_keypad.c      | 1 -
 drivers/input/keyboard/xtkbd.c               | 1 -
 drivers/input/misc/ad714x.c                  | 1 -
 drivers/input/misc/adxl34x.c                 | 1 -
 drivers/input/misc/atlas_btns.c              | 1 -
 drivers/input/misc/bfin_rotary.c             | 1 -
 drivers/input/misc/cobalt_btns.c             | 1 -
 drivers/input/misc/da9052_onkey.c            | 1 -
 drivers/input/misc/da9055_onkey.c            | 1 -
 drivers/input/misc/dm355evm_keys.c           | 1 -
 drivers/input/misc/gpio_tilt_polled.c        | 1 -
 drivers/input/misc/keyspan_remote.c          | 1 -
 drivers/input/misc/max8997_haptic.c          | 1 -
 drivers/input/misc/mc13783-pwrbutton.c       | 1 -
 drivers/input/misc/mpu3050.c                 | 1 -
 drivers/input/misc/pcap_keys.c               | 1 -
 drivers/input/misc/pcf50633-input.c          | 1 -
 drivers/input/misc/pcf8574_keypad.c          | 1 -
 drivers/input/misc/pcspkr.c                  | 1 -
 drivers/input/misc/pm8xxx-vibrator.c         | 1 -
 drivers/input/misc/pmic8xxx-pwrkey.c         | 1 -
 drivers/input/misc/powermate.c               | 1 -
 drivers/input/misc/retu-pwrbutton.c          | 1 -
 drivers/input/misc/rotary_encoder.c          | 1 -
 drivers/input/misc/sgi_btns.c                | 1 -
 drivers/input/misc/sirfsoc-onkey.c           | 1 -
 drivers/input/misc/wm831x-on.c               | 1 -
 drivers/input/misc/yealink.c                 | 1 -
 drivers/input/mouse/appletouch.c             | 1 -
 drivers/input/mouse/bcm5974.c                | 1 -
 drivers/input/mouse/cypress_ps2.c            | 1 -
 drivers/input/mouse/gpio_mouse.c             | 1 -
 drivers/input/mouse/navpoint.c               | 1 -
 drivers/input/mouse/pxa930_trkball.c         | 1 -
 drivers/input/mouse/sermouse.c               | 1 -
 drivers/input/mouse/synaptics_usb.c          | 1 -
 drivers/input/mouse/vsxxxaa.c                | 1 -
 drivers/input/serio/altera_ps2.c             | 1 -
 drivers/input/serio/ambakmi.c                | 1 -
 drivers/input/serio/libps2.c                 | 1 -
 drivers/input/serio/olpc_apsp.c              | 1 -
 drivers/input/serio/pcips2.c                 | 1 -
 drivers/input/serio/q40kbd.c                 | 1 -
 drivers/input/serio/rpckbd.c                 | 1 -
 drivers/input/serio/serio_raw.c              | 1 -
 drivers/input/serio/xilinx_ps2.c             | 1 -
 drivers/input/tablet/acecad.c                | 1 -
 drivers/input/tablet/aiptek.c                | 1 -
 drivers/input/tablet/gtco.c                  | 1 -
 drivers/input/tablet/hanwang.c               | 1 -
 drivers/input/tablet/kbtab.c                 | 1 -
 drivers/input/tablet/wacom.h                 | 1 -
 drivers/input/touchscreen/ad7877.c           | 1 -
 drivers/input/touchscreen/ad7879.c           | 1 -
 drivers/input/touchscreen/ads7846.c          | 1 -
 drivers/input/touchscreen/atmel_mxt_ts.c     | 1 -
 drivers/input/touchscreen/atmel_tsadcc.c     | 1 -
 drivers/input/touchscreen/da9034-ts.c        | 1 -
 drivers/input/touchscreen/dynapro.c          | 1 -
 drivers/input/touchscreen/egalax_ts.c        | 1 -
 drivers/input/touchscreen/elo.c              | 1 -
 drivers/input/touchscreen/fujitsu_ts.c       | 1 -
 drivers/input/touchscreen/gunze.c            | 1 -
 drivers/input/touchscreen/hampshire.c        | 1 -
 drivers/input/touchscreen/inexio.c           | 1 -
 drivers/input/touchscreen/intel-mid-touch.c  | 1 -
 drivers/input/touchscreen/jornada720_ts.c    | 1 -
 drivers/input/touchscreen/lpc32xx_ts.c       | 1 -
 drivers/input/touchscreen/mainstone-wm97xx.c | 1 -
 drivers/input/touchscreen/max11801_ts.c      | 1 -
 drivers/input/touchscreen/mcs5000_ts.c       | 1 -
 drivers/input/touchscreen/mms114.c           | 1 -
 drivers/input/touchscreen/mtouch.c           | 1 -
 drivers/input/touchscreen/pcap_ts.c          | 1 -
 drivers/input/touchscreen/penmount.c         | 1 -
 drivers/input/touchscreen/s3c2410_ts.c       | 1 -
 drivers/input/touchscreen/stmpe-ts.c         | 1 -
 drivers/input/touchscreen/ti_am335x_tsc.c    | 1 -
 drivers/input/touchscreen/touchit213.c       | 1 -
 drivers/input/touchscreen/touchright.c       | 1 -
 drivers/input/touchscreen/touchwin.c         | 1 -
 drivers/input/touchscreen/tsc40.c            | 1 -
 drivers/input/touchscreen/ucb1400_ts.c       | 1 -
 drivers/input/touchscreen/usbtouchscreen.c   | 1 -
 drivers/input/touchscreen/wacom_w8001.c      | 1 -
 drivers/input/touchscreen/wm831x-ts.c        | 1 -
 drivers/input/touchscreen/zylonite-wm97xx.c  | 1 -
 138 files changed, 138 deletions(-)

diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index fa7a95c1da0e..2909e9561cf3 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -30,7 +30,6 @@
 
 #include <linux/module.h>
 #include <linux/ioport.h>
-#include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index ae912d3aee4e..7c03114158e0 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
 
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 85bc8dc07cfc..55efdfc7eb62 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -29,7 +29,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index 0cbfd2dfabf4..b78425765d3e 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -33,7 +33,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/gameport.h>
-#include <linux/init.h>
 #include <linux/jiffies.h>
 
 #define DRIVER_DESC	"Logitech ADI joystick family driver"
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 65367e44d715..ae3ee24a2368 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -29,7 +29,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index ab1cf2882004..0f519db64748 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -30,7 +30,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/gameport.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index 9e1beff57c33..eac9c5b8d73e 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index c0f9c7b7eb4e..573191dd78e8 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -11,7 +11,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index 55196f730af6..a9ac2f9cfce0 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -30,7 +30,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index b1d7d9b0eb86..96ae4f5bd0eb 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
 #include <linux/serio.h>
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index 88c22623a2e8..17c2c800743c 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -33,7 +33,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c
index 7eb878bab968..d1c6e4846a4a 100644
--- a/drivers/input/joystick/joydump.c
+++ b/drivers/input/joystick/joydump.c
@@ -31,7 +31,6 @@
 #include <linux/gameport.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 
 #define DRIVER_DESC	"Gameport data dumper module"
diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 9fb153eef2fc..c5358ba1f571 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -31,7 +31,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Magellan and SpaceMouse 6dof controller driver"
 
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 04c69af37148..4a95b224169f 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -30,7 +30,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/gameport.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index 80a7b27a457a..f4445a4e8d6a 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -33,7 +33,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serio.h>
 
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index a41f291652e6..f2667820e8c5 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -32,7 +32,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serio.h>
 
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index 0f51a60e14a7..099c6d7b5e08 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -32,7 +32,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Gravis Stinger gamepad driver"
 
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index 5ef9bcdb0345..7e17cde464f0 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -33,7 +33,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/gameport.h>
 #include <linux/input.h>
 #include <linux/jiffies.h>
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 2556a8193579..7f7e5ab3f9e3 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -52,7 +52,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Handykey Twiddler keyboard as a joystick driver"
 
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index 23b3071abb6e..e13a9144a25d 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -31,7 +31,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Logitech WingMan Warrior joystick driver"
 
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 75e3b102ce45..618ea0acb86f 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -74,7 +74,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/module.h>
diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c
index c4de4388fd7f..30af2e8c670c 100644
--- a/drivers/input/joystick/zhenhua.c
+++ b/drivers/input/joystick/zhenhua.c
@@ -49,7 +49,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"RC transmitter with 5-byte Zhen Hua protocol joystick driver"
 
diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c
index 0dc1151d02fb..4cc14c2fa7d5 100644
--- a/drivers/input/keyboard/adp5520-keys.c
+++ b/drivers/input/keyboard/adp5520-keys.c
@@ -8,7 +8,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/mfd/adp5520.h>
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index a8f5f9216565..bb3b57bea8ba 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index ff7725a00776..6329549bf6ad 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -8,7 +8,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 16223f4599d4..e6d46c5994d7 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -30,7 +30,6 @@
 
 #include <linux/module.h>
 
-#include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c
index 9f60a2ec88db..69e854763370 100644
--- a/drivers/input/keyboard/goldfish_events.c
+++ b/drivers/input/keyboard/goldfish_events.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/input.h>
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 4e428199e580..e571e194ff84 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -17,7 +17,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/input-polldev.h>
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 589e3c258f3f..610a8af795a1 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -36,7 +36,6 @@
 #include <linux/serio.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/completion.h>
 #include <linux/slab.h>
 #include <linux/pci_ids.h>
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 34bb35895268..cbf4f8038cba 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -13,7 +13,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
index a2a034c25f0b..69b1f002ff52 100644
--- a/drivers/input/keyboard/jornada680_kbd.c
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -16,7 +16,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/input-polldev.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index b0ad457ca9d8..cd729d485e98 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -18,7 +18,6 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index fc0a63c2f278..9fcd9f1d5dc8 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -65,7 +65,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serio.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 90ff73ace424..8d2e19e81e1e 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 5ec77523e040..1da8e0b44b56 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/mcs.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 98b8467aa6c9..009c82256e89 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -13,7 +13,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index f971898ad591..20f044377990 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 
 #define DRIVER_DESC	"Newton keyboard driver"
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index e80bb9743356..b1acc9852eb7 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -25,7 +25,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/input.h>
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 30acfd49fa6c..0400b3f2b4b9 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -22,7 +22,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/errno.h>
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 186138c720c7..d8241ba0afa0 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -18,7 +18,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/device.h>
diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c
index 367b03ab92a2..374ca0246c8f 100644
--- a/drivers/input/keyboard/pxa930_rotary.c
+++ b/drivers/input/keyboard/pxa930_rotary.c
@@ -8,7 +8,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index 6c561ec3cc09..52cd6e88acd7 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -25,7 +25,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/slab.h>
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 1c0ddad0a1cc..819b22897c13 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -19,7 +19,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index a7357adeaf24..5e80fbf7b5ed 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -14,7 +14,6 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index d65a98b1d7dd..7abf03b4cc9c 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -12,7 +12,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 85ff530d9a91..258af10e5811 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -12,7 +12,6 @@
 
 #include <linux/clk.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/io.h>
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index 5cbec56f7720..c6727dda68f2 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c
index cc612c5d5427..a6e0d565e306 100644
--- a/drivers/input/keyboard/stowaway.c
+++ b/drivers/input/keyboard/stowaway.c
@@ -32,7 +32,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 
 #define DRIVER_DESC	"Stowaway keyboard driver"
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index 5f836b1638c1..dc6bb9d5b4f0 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -31,7 +31,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serio.h>
 #include <linux/workqueue.h>
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 208de7cbb7fa..74494a357522 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 71eb0411e379..c5a11700a1bf 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index e03614f20d3b..e8b9d94daae7 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -11,7 +11,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/device.h>
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index d050d9d0011b..7c2325bd7408 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 
 #define DRIVER_DESC	"XT keyboard driver"
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 6deecdd3d11b..7a61e9ee682c 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index 86c9ec48804f..2b2d02f408bb 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -8,7 +8,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index 5d4402365a52..c0c5b63af90a 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -25,7 +25,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/types.h>
 #include <asm/uaccess.h>
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index 7703447d1fd9..e69d9bcb37e1 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index b5d71d245854..3e11510ff82d 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -17,7 +17,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  */
-#include <linux/init.h>
 #include <linux/input-polldev.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c
index 020569a499f2..1f695f229ea8 100644
--- a/drivers/input/misc/da9052_onkey.c
+++ b/drivers/input/misc/da9052_onkey.c
@@ -11,7 +11,6 @@
  * option) any later version.
  */
 
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c
index a0af8b2506ce..4b11ede34950 100644
--- a/drivers/input/misc/da9055_onkey.c
+++ b/drivers/input/misc/da9055_onkey.c
@@ -11,7 +11,6 @@
  * option) any later version.
  */
 
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index a309a5c0899e..0eba94f581df 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -9,7 +9,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
index 38b3c11a8ae9..1a81d9115226 100644
--- a/drivers/input/misc/gpio_tilt_polled.c
+++ b/drivers/input/misc/gpio_tilt_polled.c
@@ -16,7 +16,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/input-polldev.h>
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 290fa5f97ded..01f3b5b300f3 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -13,7 +13,6 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/usb/input.h>
diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c
index e973133212a5..1fea5484941f 100644
--- a/drivers/input/misc/max8997_haptic.c
+++ b/drivers/input/misc/max8997_haptic.c
@@ -23,7 +23,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
index d0277a7b1579..0df6e8d8bd03 100644
--- a/drivers/input/misc/mc13783-pwrbutton.c
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -20,7 +20,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/input.h>
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index 6983ffbbfb94..5e5051351c3a 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -30,7 +30,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c
index 40ac9a5adf89..cd230365166e 100644
--- a/drivers/input/misc/pcap_keys.c
+++ b/drivers/input/misc/pcap_keys.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 73b13ebabe56..db92f4f3c99b 100644
--- a/drivers/input/misc/pcf50633-input.c
+++ b/drivers/input/misc/pcf50633-input.c
@@ -16,7 +16,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 0deca5a3c87f..97f711a7bd20 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 7288b267613d..674a2cfc3c0e 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i8253.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
 #include <linux/timex.h>
diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index 28251560249d..b88b7cbf93e2 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index aaf332510623..0e1a05f95858 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 49c0c3ebd321..63b539d3daba 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -31,7 +31,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/usb/input.h>
 
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
index 7ca09baa0016..4bff1aa9b0db 100644
--- a/drivers/input/misc/retu-pwrbutton.c
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -17,7 +17,6 @@
  */
 
 #include <linux/irq.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/input.h>
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index f920ba7ab51f..99b9e42aa748 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -16,7 +16,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/device.h>
diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c
index 95cf299ef9a3..f10474937a64 100644
--- a/drivers/input/misc/sgi_btns.c
+++ b/drivers/input/misc/sgi_btns.c
@@ -17,7 +17,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  */
-#include <linux/init.h>
 #include <linux/input-polldev.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c
index 7b8b03e0d0be..e8897c36d21b 100644
--- a/drivers/input/misc/sirfsoc-onkey.c
+++ b/drivers/input/misc/sirfsoc-onkey.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index caa2c4068f09..173b6dcca0da 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -18,7 +18,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 285a5bd6cbc9..79c964c075f1 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -47,7 +47,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/rwsem.h>
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index e42f1fa8cdc0..800ca7dfafc2 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -30,7 +30,6 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/usb/input.h>
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index a73f9618b0ad..c329cdb0b91a 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -34,7 +34,6 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/usb/input.h>
diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index a5869a856ea5..87095e2f5153 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -15,7 +15,6 @@
  * the Free Software Foundation.
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 6810a4626a2a..8c7d94200bdb 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -8,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c
index 0b8d33591dee..1ccc88af1f0b 100644
--- a/drivers/input/mouse/navpoint.c
+++ b/drivers/input/mouse/navpoint.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index d20d2ae5f1ee..9b4d9a59e229 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -10,7 +10,6 @@
  *  published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index d5928fd0c914..8df526620ebf 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -32,7 +32,6 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Serial mouse driver"
 
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
index 64cf34ea7604..e122bda16aab 100644
--- a/drivers/input/mouse/synaptics_usb.c
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -39,7 +39,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index e900d465aaf6..38298232124f 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -82,7 +82,6 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
 
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
index 4777a73cd390..cce69d6b9587 100644
--- a/drivers/input/serio/altera_ps2.c
+++ b/drivers/input/serio/altera_ps2.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/serio.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index 4e2fd44865e1..3e3776c7bd21 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -10,7 +10,6 @@
  * (at your option) any later version.
  */
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 07a8363f3c5c..75516996db20 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -18,7 +18,6 @@
 #include <linux/input.h>
 #include <linux/serio.h>
 #include <linux/i8042.h>
-#include <linux/init.h>
 #include <linux/libps2.h>
 
 #define DRIVER_DESC	"PS/2 driver library"
diff --git a/drivers/input/serio/olpc_apsp.c b/drivers/input/serio/olpc_apsp.c
index 51b1d40cc286..5d2fe7ece7ca 100644
--- a/drivers/input/serio/olpc_apsp.c
+++ b/drivers/input/serio/olpc_apsp.c
@@ -16,7 +16,6 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 13062f667e82..e862c6ea9d9e 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -16,7 +16,6 @@
 #include <linux/input.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/delay.h>
 #include <asm/io.h>
diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c
index 7a65a1bc5226..594256c38554 100644
--- a/drivers/input/serio/q40kbd.c
+++ b/drivers/input/serio/q40kbd.c
@@ -30,7 +30,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 567566ae0dae..e462e7791bb8 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -29,7 +29,6 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/serio.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 59df2e7317a3..c9a02fe57576 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -15,7 +15,6 @@
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/device.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index dfbcd872f95e..e6cf52ebad87 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -20,7 +20,6 @@
 #include <linux/interrupt.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index e062ec899ca1..889f6b77e8cb 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/usb/input.h>
 
 /*
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index ee83c3904ee8..e7f966da6efa 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -74,7 +74,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/usb/input.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 29e01ab6859f..caecffe8caff 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -53,7 +53,6 @@ Scott Hill shill@gtcocalcomp.com
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/usb.h>
diff --git a/drivers/input/tablet/hanwang.c b/drivers/input/tablet/hanwang.c
index 5cc04124995c..cd852059b99e 100644
--- a/drivers/input/tablet/hanwang.c
+++ b/drivers/input/tablet/hanwang.c
@@ -26,7 +26,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/usb/input.h>
 
 #define DRIVER_AUTHOR   "Xing Wei <weixing@hanwang.com.cn>"
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
index 3fba74b9b602..d2ac7c2b5b82 100644
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -1,7 +1,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/usb/input.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index b79d45198d82..9ebf0ed3b3b3 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -86,7 +86,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
-#include <linux/init.h>
 #include <linux/usb/input.h>
 #include <linux/power_supply.h>
 #include <asm/unaligned.h>
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index b9f9bcb22683..6793c85903ae 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -37,7 +37,6 @@
 
 
 #include <linux/device.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index a0364d8ae6c6..fce590677b7b 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -22,7 +22,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index f91592ab2f3a..45a06e495ed2 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -19,7 +19,6 @@
  */
 #include <linux/types.h>
 #include <linux/hwmon.h>
-#include <linux/init.h>
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 37ea05741d20..a70400754e92 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index f7d1ea5849ba..a7c9d6967d1e 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -12,7 +12,6 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-#include <linux/init.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index ea0f7645220f..8ccf7bb4028a 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -13,7 +13,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
index 1809677a6513..86237a910876 100644
--- a/drivers/input/touchscreen/dynapro.c
+++ b/drivers/input/touchscreen/dynapro.c
@@ -24,7 +24,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Dynapro serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index 054d22583248..e6bcb13680b2 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -18,7 +18,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 957423d1471d..8051a4b704ea 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -22,7 +22,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 #include <linux/ctype.h>
 
 #define DRIVER_DESC	"Elo serial touchscreen driver"
diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c
index 10794ddbdf58..d0e46a7e183b 100644
--- a/drivers/input/touchscreen/fujitsu_ts.c
+++ b/drivers/input/touchscreen/fujitsu_ts.c
@@ -16,7 +16,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Fujitsu serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index 41c71766bf18..e2ee62615273 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -32,7 +32,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Gunze AHL-51S touchscreen driver"
 
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
index 0cc47ea98acf..ecb1e0e01328 100644
--- a/drivers/input/touchscreen/hampshire.c
+++ b/drivers/input/touchscreen/hampshire.c
@@ -23,7 +23,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Hampshire serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c
index a29c99c32245..adb80b65a259 100644
--- a/drivers/input/touchscreen/inexio.c
+++ b/drivers/input/touchscreen/inexio.c
@@ -23,7 +23,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"iNexio serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index e30d837dae2f..4f6b156144e9 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -27,7 +27,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index e463a79ffecc..7324c5c0fb86 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index 9101ee529c92..2058253b55d9 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -15,7 +15,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 7d2b2136e5ad..0786010d7ed0 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c
index 9f84fcd08732..a68ec142ee9a 100644
--- a/drivers/input/touchscreen/max11801_ts.c
+++ b/drivers/input/touchscreen/max11801_ts.c
@@ -33,7 +33,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index 58486f135a4c..647e36f5930e 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/mcs.h>
 #include <linux/interrupt.h>
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 1443532fe6c4..8a598c065391 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -8,7 +8,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/i2c.h>
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
index eb66b7c37c2f..9b5552a26169 100644
--- a/drivers/input/touchscreen/mtouch.c
+++ b/drivers/input/touchscreen/mtouch.c
@@ -21,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"MicroTouch serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
index f22e04dd4e16..cff2376817e5 100644
--- a/drivers/input/touchscreen/pcap_ts.c
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/slab.h>
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index b49f0b836925..417d87379265 100644
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -21,7 +21,6 @@
 #include <linux/input.h>
 #include <linux/input/mt.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"PenMount serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index d32bd9e6d215..19cb247dbb86 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -28,7 +28,6 @@
 #include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index 59e81b00f244..42ce31afa259 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 68beadaabceb..6c9cd1268dc3 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -14,7 +14,6 @@
  */
 
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/module.h>
diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c
index 5f29e5b8e1c1..c27cf8f3d1ca 100644
--- a/drivers/input/touchscreen/touchit213.c
+++ b/drivers/input/touchscreen/touchit213.c
@@ -21,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Sahara TouchIT-213 serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c
index 8a2887daf194..4000e5205407 100644
--- a/drivers/input/touchscreen/touchright.c
+++ b/drivers/input/touchscreen/touchright.c
@@ -20,7 +20,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Touchright serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c
index 588cdcb839dd..ba90f447df75 100644
--- a/drivers/input/touchscreen/touchwin.c
+++ b/drivers/input/touchscreen/touchwin.c
@@ -27,7 +27,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define DRIVER_DESC	"Touchwindow serial touchscreen driver"
 
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
index eb96f168fb9d..29687872cb94 100644
--- a/drivers/input/touchscreen/tsc40.c
+++ b/drivers/input/touchscreen/tsc40.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 
 #define PACKET_LENGTH  5
 struct tsc_ser {
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 5b3ca807d179..b46c55cd1bbb 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -19,7 +19,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 5f87bed05467..a0966331a89b 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -51,7 +51,6 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
 #include <linux/hid.h>
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 9a83be6b6584..2792ca397dd0 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/input/mt.h>
 #include <linux/serio.h>
-#include <linux/init.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
 
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
index 6be2eb6a153a..1b953a066b2c 100644
--- a/drivers/input/touchscreen/wm831x-ts.c
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/string.h>
 #include <linux/pm.h>
 #include <linux/input.h>
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index bf0869a7a78e..e2ccd683de6e 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
-- 
cgit v1.2.3


From 25fd31768e2413a5920dea1253cc06add2bad383 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Date: Sun, 12 Jan 2014 11:08:49 -0800
Subject: Input: logips2pp - fix spelling s/reciver/receiver/

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/mouse/logips2pp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 84de2fc6acc1..136e222e2a16 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -220,7 +220,7 @@ static const struct ps2pp_info *get_model_info(unsigned char model)
 		{ 61,	PS2PP_KIND_MX,					/* MX700 */
 				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
 				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN },
-		{ 66,	PS2PP_KIND_MX,					/* MX3100 reciver */
+		{ 66,	PS2PP_KIND_MX,					/* MX3100 receiver */
 				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
 				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
 		{ 72,	PS2PP_KIND_TRACKMAN,	0 },			/* T-CH11: TrackMan Marble */
-- 
cgit v1.2.3


From c3c4d99485ea51cd354ed3cd955a8310703456b6 Mon Sep 17 00:00:00 2001
From: "K. Y. Srinivasan" <kys@microsoft.com>
Date: Sun, 12 Jan 2014 11:09:14 -0800
Subject: Input: hyperv-keyboard - pass through 0xE1 prefix

Pass through the 0xE1 prefix so atkbd can properly parse the scancode
data.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/serio/hyperv-keyboard.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index 3a83c3c14b23..613261994621 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -160,7 +160,9 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 			if (info & IS_E0)
 				serio_interrupt(kbd_dev->hv_serio,
 						XTKBD_EMUL0, 0);
-
+			if (info & IS_E1)
+				serio_interrupt(kbd_dev->hv_serio,
+						XTKBD_EMUL1, 0);
 			scan_code = __le16_to_cpu(ks_msg->make_code);
 			if (info & IS_BREAK)
 				scan_code |= XTKBD_RELEASE;
-- 
cgit v1.2.3


From 02300bd6517e19bd8651c9e72c788749a442ae22 Mon Sep 17 00:00:00 2001
From: Lothar Waßmann <LW@KARO-electronics.de>
Date: Thu, 16 Jan 2014 16:26:55 -0800
Subject: Input: edt_ft5x06 - use devm_* functions where appropriate
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Simplify the error path and remove() function by using devm_*
functions for requesting gpios and irq and allocating the input
device.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/edt-ft5x06.c | 69 +++++++++++++---------------------
 1 file changed, 26 insertions(+), 43 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index af0d68b703b7..412a85ec9ba5 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -623,8 +623,9 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
 
 	if (gpio_is_valid(reset_pin)) {
 		/* this pulls reset down, enabling the low active reset */
-		error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
-					 "edt-ft5x06 reset");
+		error = devm_gpio_request_one(&client->dev, reset_pin,
+					      GPIOF_OUT_INIT_LOW,
+					      "edt-ft5x06 reset");
 		if (error) {
 			dev_err(&client->dev,
 				"Failed to request GPIO %d as reset pin, error %d\n",
@@ -723,8 +724,8 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		return error;
 
 	if (gpio_is_valid(pdata->irq_pin)) {
-		error = gpio_request_one(pdata->irq_pin,
-					 GPIOF_IN, "edt-ft5x06 irq");
+		error = devm_gpio_request_one(&client->dev, pdata->irq_pin,
+					      GPIOF_IN, "edt-ft5x06 irq");
 		if (error) {
 			dev_err(&client->dev,
 				"Failed to request GPIO %d, error %d\n",
@@ -733,12 +734,16 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		}
 	}
 
-	tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!tsdata || !input) {
+	tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
+	if (!tsdata) {
 		dev_err(&client->dev, "failed to allocate driver data.\n");
-		error = -ENOMEM;
-		goto err_free_mem;
+		return -ENOMEM;
+	}
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input) {
+		dev_err(&client->dev, "failed to allocate input device.\n");
+		return -ENOMEM;
 	}
 
 	mutex_init(&tsdata->mutex);
@@ -749,7 +754,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
 	if (error) {
 		dev_err(&client->dev, "touchscreen probe failed\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	edt_ft5x06_ts_get_defaults(tsdata, pdata);
@@ -776,27 +781,30 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	input_set_drvdata(input, tsdata);
 	i2c_set_clientdata(client, tsdata);
 
-	error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
-				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				     client->name, tsdata);
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, edt_ft5x06_ts_isr,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, tsdata);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	error = input_register_device(input);
-	if (error)
-		goto err_remove_attrs;
+	if (error) {
+		sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+		return error;
+	}
 
 	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
 	device_init_wakeup(&client->dev, 1);
@@ -806,40 +814,15 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		pdata->irq_pin, pdata->reset_pin);
 
 	return 0;
-
-err_remove_attrs:
-	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
-err_free_irq:
-	free_irq(client->irq, tsdata);
-err_free_mem:
-	input_free_device(input);
-	kfree(tsdata);
-
-	if (gpio_is_valid(pdata->irq_pin))
-		gpio_free(pdata->irq_pin);
-
-	return error;
 }
 
 static int edt_ft5x06_ts_remove(struct i2c_client *client)
 {
-	const struct edt_ft5x06_platform_data *pdata =
-						dev_get_platdata(&client->dev);
 	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
 
 	edt_ft5x06_ts_teardown_debugfs(tsdata);
 	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
 
-	free_irq(client->irq, tsdata);
-	input_unregister_device(tsdata->input);
-
-	if (gpio_is_valid(pdata->irq_pin))
-		gpio_free(pdata->irq_pin);
-	if (gpio_is_valid(pdata->reset_pin))
-		gpio_free(pdata->reset_pin);
-
-	kfree(tsdata);
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 713481620b60cb311486cac3c38b1185dec31f5d Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Thu, 16 Jan 2014 16:28:47 -0800
Subject: Input: wacom - fix wacom->shared guards for dual input devices

features->quirks can have multiple bits set. For dual input, we only
need to check WACOM_QUIRK_MULTI_INPUT.

Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/tablet/wacom_wac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 048e5b38f167..0bcc7a634214 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -331,7 +331,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
-		if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
+		if (features->quirks & WACOM_QUIRK_MULTI_INPUT)
 			wacom->shared->stylus_in_proximity = true;
 
 		/* serial number of the tool */
@@ -436,7 +436,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
-		if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
+		if (features->quirks & WACOM_QUIRK_MULTI_INPUT)
 			wacom->shared->stylus_in_proximity = false;
 
 		/*
-- 
cgit v1.2.3


From 497ab1f290a26fa9414c5c316515f1e2ddba0803 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Mon, 20 Jan 2014 20:18:04 -0800
Subject: Input: wacom - add support for DTU-1031

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/tablet/wacom_wac.c | 72 +++++++++++++++++++++++++++++++++++++++-
 drivers/input/tablet/wacom_wac.h |  6 +++-
 2 files changed, 76 insertions(+), 2 deletions(-)

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 0bcc7a634214..05f371df6c40 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -210,6 +210,62 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
+static int wacom_dtus_irq(struct wacom_wac *wacom)
+{
+	char *data = wacom->data;
+	struct input_dev *input = wacom->input;
+	unsigned short prox, pressure = 0;
+
+	if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d", __func__, data[0]);
+		return 0;
+	} else if (data[0] == WACOM_REPORT_DTUSPAD) {
+		input_report_key(input, BTN_0, (data[1] & 0x01));
+		input_report_key(input, BTN_1, (data[1] & 0x02));
+		input_report_key(input, BTN_2, (data[1] & 0x04));
+		input_report_key(input, BTN_3, (data[1] & 0x08));
+		input_report_abs(input, ABS_MISC,
+				 data[1] & 0x0f ? PAD_DEVICE_ID : 0);
+		/*
+		 * Serial number is required when expresskeys are
+		 * reported through pen interface.
+		 */
+		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+		return 1;
+	} else {
+		prox = data[1] & 0x80;
+		if (prox) {
+			switch ((data[1] >> 3) & 3) {
+			case 1: /* Rubber */
+				wacom->tool[0] = BTN_TOOL_RUBBER;
+				wacom->id[0] = ERASER_DEVICE_ID;
+				break;
+
+			case 2: /* Pen */
+				wacom->tool[0] = BTN_TOOL_PEN;
+				wacom->id[0] = STYLUS_DEVICE_ID;
+				break;
+			}
+		}
+
+		input_report_key(input, BTN_STYLUS, data[1] & 0x20);
+		input_report_key(input, BTN_STYLUS2, data[1] & 0x40);
+		input_report_abs(input, ABS_X, get_unaligned_be16(&data[3]));
+		input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5]));
+		pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff);
+		input_report_abs(input, ABS_PRESSURE, pressure);
+		input_report_key(input, BTN_TOUCH, pressure > 10);
+
+		if (!prox) /* out-prox */
+			wacom->id[0] = 0;
+		input_report_key(input, wacom->tool[0], prox);
+		input_report_abs(input, ABS_MISC, wacom->id[0]);
+		input_event(input, EV_MSC, MSC_SERIAL, 1);
+		return 1;
+	}
+}
+
 static int wacom_graphire_irq(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
@@ -1371,6 +1427,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_dtu_irq(wacom_wac);
 		break;
 
+	case DTUS:
+		sync = wacom_dtus_irq(wacom_wac);
+		break;
+
 	case INTUOS:
 	case INTUOS3S:
 	case INTUOS3:
@@ -1562,7 +1622,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	wacom_abs_set_axis(input_dev, wacom_wac);
 
-	switch (wacom_wac->features.type) {
+	switch (features->type) {
 	case WACOM_MO:
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 		/* fall through */
@@ -1773,8 +1833,14 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 		/* fall through */
 
+	case DTUS:
 	case PL:
 	case DTU:
+		if (features->type == DTUS) {
+			input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+			for (i = 0; i < 3; i++)
+				__set_bit(BTN_0 + i, input_dev->keybit);
+		}
 		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
 		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 		__set_bit(BTN_STYLUS, input_dev->keybit);
@@ -2096,6 +2162,9 @@ static const struct wacom_features wacom_features_0xCE =
 static const struct wacom_features wacom_features_0xF0 =
 	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,
 	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xFB =
+	{ "Wacom DTU1031",        WACOM_PKGLEN_DTUS,      22096, 13960,  511,
+	  0, DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x57 =
 	{ "Wacom DTK2241",        WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
 	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES};
@@ -2402,6 +2471,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xF8) },
 	{ USB_DEVICE_DETAILED(0xF6, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_WACOM(0xFA) },
+	{ USB_DEVICE_WACOM(0xFB) },
 	{ USB_DEVICE_WACOM(0x0307) },
 	{ USB_DEVICE_DETAILED(0x0309, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_LENOVO(0x6004) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 3600cf705fb1..f69c0ebe7fa9 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -12,7 +12,7 @@
 #include <linux/types.h>
 
 /* maximum packet length for USB devices */
-#define WACOM_PKGLEN_MAX	64
+#define WACOM_PKGLEN_MAX	68
 
 #define WACOM_NAME_MAX		64
 
@@ -29,6 +29,7 @@
 #define WACOM_PKGLEN_WIRELESS	32
 #define WACOM_PKGLEN_MTOUCH	62
 #define WACOM_PKGLEN_MTTPC	40
+#define WACOM_PKGLEN_DTUS	68
 
 /* wacom data size per MT contact */
 #define WACOM_BYTES_PER_MT_PACKET	11
@@ -47,11 +48,13 @@
 #define WACOM_REPORT_INTUOSWRITE	6
 #define WACOM_REPORT_INTUOSPAD		12
 #define WACOM_REPORT_INTUOS5PAD		3
+#define WACOM_REPORT_DTUSPAD		21
 #define WACOM_REPORT_TPC1FG		6
 #define WACOM_REPORT_TPC2FG		13
 #define WACOM_REPORT_TPCMT		13
 #define WACOM_REPORT_TPCHID		15
 #define WACOM_REPORT_TPCST		16
+#define WACOM_REPORT_DTUS		17
 #define WACOM_REPORT_TPC1FGE		18
 #define WACOM_REPORT_24HDT		1
 #define WACOM_REPORT_WL			128
@@ -70,6 +73,7 @@ enum {
 	PTU,
 	PL,
 	DTU,
+	DTUS,
 	INTUOS,
 	INTUOS3S,
 	INTUOS3,
-- 
cgit v1.2.3