From 54bdce950e89f04a545fbec2e75061380f2113c7 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@ti.com>
Date: Sat, 2 Dec 2017 19:33:55 -0800
Subject: ARM: dts: keystone-k2l: Add the second gpio bank node

In case of k2l there are 2 more banks with 16 pins each.
Adding the node as the da-vinci driver now supports multiple
banks.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2l.dtsi | 44 +++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 4370e6513aa4..cc771139c9ce 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -63,6 +63,50 @@
 			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		gpio1: gpio@2348000 {
+			compatible = "ti,keystone-gpio";
+			reg = <0x02348000 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* HW Interrupts mapped to GPIO pins */
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 154 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 155 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 156 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 157 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 160 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 161 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 163 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 164 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 165 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 168 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 169 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 401 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 402 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 403 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 404 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 405 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 407 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkgpio>;
+			clock-names = "gpio";
+			ti,ngpio = <32>;
+			ti,davinci-gpio-unbanked = <32>;
+		};
+
 		k2l_pmx: pinmux@2620690 {
 			compatible = "pinctrl-single";
 			reg = <0x02620690 0xc>;
-- 
cgit v1.2.3


From 13fc30c7e1db894835664a19dd6a29f361289abb Mon Sep 17 00:00:00 2001
From: Vignesh R <vigneshr@ti.com>
Date: Sat, 2 Dec 2017 19:33:55 -0800
Subject: ARM: dts: keystone-k2g: Add QSPI DT entry

Add DT node for Cadence QSPI IP present in 66AK2G SoC.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8f313ff406b9..01d29320b04c 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -377,6 +377,20 @@
 			power-domains = <&k2g_pds 0xc>;
 			clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
 			clock-names = "fck", "mmchsdb_fck";
+		};
+
+		qspi: qspi@2940000 {
+			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02940000 0x1000>,
+			      <0x24000000 0x4000000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x24000000>;
+			clocks = <&k2g_clks 0x43 0x0>;
+			power-domains = <&k2g_pds 0x43>;
 			status = "disabled";
 		};
 
-- 
cgit v1.2.3


From 4cf6e1f0212f68000bb80844ae7586fee6beb058 Mon Sep 17 00:00:00 2001
From: Vignesh R <vigneshr@ti.com>
Date: Sat, 2 Dec 2017 19:33:56 -0800
Subject: ARM: dts: keystone-k2g-evm: Fix botched up merge

spi1 and ecap0 pinmuxes ended up under root node instead of k2g_pinctrl
node. Fix this by moving them under k2g_pinctrl node.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 656af194a518..298a50555e46 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -45,22 +45,6 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
-
-	ecap0_pins: ecap0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
-		>;
-	};
-
-	spi1_pins: pinmux_spi1_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_scs0.spi1_scs0 */
-			K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_clk.spi1_clk */
-			K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_miso.spi1_miso */
-			K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_mosi.spi1_mosi */
-		>;
-	};
-
 };
 
 &k2g_pinctrl {
@@ -105,6 +89,20 @@
 		>;
 	};
 
+	ecap0_pins: ecap0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_scs0.spi1_scs0 */
+			K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_clk.spi1_clk */
+			K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_miso.spi1_miso */
+			K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_mosi.spi1_mosi */
+		>;
+	};
 };
 
 &uart0 {
-- 
cgit v1.2.3


From aabed2ad1d9a645a046a37225dd1d6c08237a4df Mon Sep 17 00:00:00 2001
From: Vignesh R <vigneshr@ti.com>
Date: Sat, 2 Dec 2017 19:33:56 -0800
Subject: ARM: dts: keystone-k2g: Move ti,non-removable property to board dts

On 66AK2G EVM mmc1 is connected to emmc whereas 66AK2G ICE baord has SD
card slot connected to mmc1. Therefore move emmc specific
ti,non-removable property from SoC file to EVM's dts file.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 1 +
 arch/arm/boot/dts/keystone-k2g.dtsi    | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 298a50555e46..03b3e7c5dc8e 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -127,6 +127,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+	ti,non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 01d29320b04c..ef82c0a6e607 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -372,7 +372,6 @@
 			dma-names = "tx", "rx";
 			bus-width = <8>;
 			ti,needs-special-reset;
-			ti,non-removable;
 			max-frequency = <96000000>;
 			power-domains = <&k2g_pds 0xc>;
 			clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
-- 
cgit v1.2.3


From c2097f482a5530cbdc874561af48ccf32f136aa8 Mon Sep 17 00:00:00 2001
From: Vignesh R <vigneshr@ti.com>
Date: Sat, 2 Dec 2017 19:33:56 -0800
Subject: ARM: dts: keystone-k2g-evm: Add QSPI DT node.

66AK2G EVM has a s25fl512s flash connected to QSPI. Add DT nodes for the
same.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 59 ++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 03b3e7c5dc8e..8d100217e38f 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -103,6 +103,18 @@
 			K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_mosi.spi1_mosi */
 		>;
 	};
+
+	qspi_pins: pinmux_qspi_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+			K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+			K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+			K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+			K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+		>;
+	};
 };
 
 &uart0 {
@@ -204,3 +216,50 @@
 		};
 	};
 };
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	cdns,rclk-en;
+
+	flash0: m25p80@0 {
+		compatible = "s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <96000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cdns,read-delay = <5>;
+		cdns,tshsl-ns = <500>;
+		cdns,tsd2d-ns = <500>;
+		cdns,tchsh-ns = <119>;
+		cdns,tslch-ns = <119>;
+
+		partition@0 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00100000 0x00040000>;
+		};
+		partition@2 {
+			label = "QSPI.skern";
+			reg = <0x00140000 0x0040000>;
+		};
+		partition@3 {
+			label = "QSPI.pmmc-firmware";
+			reg = <0x00180000 0x0040000>;
+		};
+		partition@4 {
+			label = "QSPI.kernel";
+			reg = <0x001C0000 0x0800000>;
+		};
+		partition@5 {
+			label = "QSPI.file-system";
+			reg = <0x009C0000 0x3640000>;
+		};
+	};
+};
-- 
cgit v1.2.3


From 6b1f51828559a2e1b0dadf6a114dd45414e4e2de Mon Sep 17 00:00:00 2001
From: Vignesh R <vigneshr@ti.com>
Date: Sat, 2 Dec 2017 19:33:56 -0800
Subject: ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals

Add DT nodes for QSPI, on board LEDS, MMC, I2C, PCA IO expander,
gpio-decoder and regulators on K2G ICE board.

Thanks to Franklin S Cooper Jr <fcooper@ti.com> for initial work on few
peripherals.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g-ice.dts | 336 +++++++++++++++++++++++++++++++++
 1 file changed, 336 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 78692745e0af..1736eb53ad83 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -30,6 +30,191 @@
 			status = "okay";
 		};
 	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_fixed";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	v5_0: fixedregulator-v5_0 {
+		/* TPS54531 */
+		compatible = "regulator-fixed";
+		regulator-name = "v5_0_fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain>;
+		regulator-always-on;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		/* TLV62084 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vdd_1v8: fixedregulator-vdd_1v8 {
+		/* TLV62084 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vdds_ddr: fixedregulator-vdds_ddr {
+		/* TLV62080 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdds_ddr_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vref_ddr: fixedregulator-vref_ddr {
+		/* LP2996A */
+		compatible = "regulator-fixed";
+		regulator-name = "vref_ddr_fixed";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	vtt_ddr: fixedregulator-vtt_ddr {
+		/* LP2996A */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_ddr_fixed";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	vdd_0v9: fixedregulator-vdd_0v9 {
+		/* TPS62180 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9_fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vddb: fixedregulator-vddb {
+		/* TPS22945 */
+		compatible = "regulator-fixed";
+		regulator-name = "vddb_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
+
+	leds1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led6 {
+			label = "status2:red:usr";
+			gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led7 {
+			label = "status2:green:usr";
+			gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led8 {
+			label = "status2:yellow:usr";
+			gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led9 {
+			label = "status3:red:usr";
+			gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led10 {
+			label = "status3:green:usr";
+			gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led11 {
+			label = "status3:yellow:usr";
+			gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led12 {
+			label = "status4:green:heartbeat";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
 
 &k2g_pinctrl {
@@ -39,6 +224,64 @@
 			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
+
+	qspi_pins: pinmux_qspi_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+			K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+			K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+			K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+			K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+			K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* mmc1_sdcd.gpio0_69 */
+			K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_sdwp.mmc1_sdwp */
+			K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_pow.mmc1_pow */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	user_leds: pinmux_user_leds {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad11.gpio0_11 */
+			K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad12.gpio0_12 */
+			K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad13.gpio0_13 */
+			K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad14.gpio0_14 */
+			K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad15.gpio0_15 */
+			K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_clk.gpio0_16 */
+			K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_wen.gpio0_19 */
+			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data9.gpio0_44 */
+			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data10.gpio0_43 */
+			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data11.gpio0_42 */
+			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data12.gpio0_41 */
+			K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn0.gpio0_101 */
+			K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn1.gpio0_102 */
+		>;
+	};
 };
 
 &uart0 {
@@ -51,3 +294,96 @@
 	memory-region = <&dsp_common_memory>;
 	status = "okay";
 };
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	cdns,rclk-en;
+	status = "okay";
+
+	flash0: m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <96000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cdns,read-delay = <5>;
+		cdns,tshsl-ns = <500>;
+		cdns,tsd2d-ns = <500>;
+		cdns,tchsh-ns = <119>;
+		cdns,tslch-ns = <119>;
+
+		partition@0 {
+			label = "QSPI.u-boot";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00100000 0x00040000>;
+		};
+		partition@2 {
+			label = "QSPI.skern";
+			reg = <0x00140000 0x0040000>;
+		};
+		partition@3 {
+			label = "QSPI.pmmc-firmware";
+			reg = <0x00180000 0x0040000>;
+		};
+		partition@4 {
+			label = "QSPI.kernel";
+			reg = <0x001c0000 0x0800000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x009c0000 0x0040000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x00a00000 0x1600000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vdd_3v3>;
+	cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9536: gpio@41 {
+		compatible = "ti,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_3v3>;
+	};
+};
-- 
cgit v1.2.3


From b1516245ae98f9d6b227c99d239ee75ca91ca0d4 Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javierm@redhat.com>
Date: Sat, 2 Dec 2017 19:33:56 -0800
Subject: ARM: dts: keystone: Add generic compatible string for I2C EEPROM

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2e-evm.dts  | 2 +-
 arch/arm/boot/dts/keystone-k2hk-evm.dts | 2 +-
 arch/arm/boot/dts/keystone-k2l-evm.dts  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index f1f32c54e72f..2c59f4cb3b44 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -82,7 +82,7 @@
 
 &i2c0 {
 	dtt@50 {
-		compatible = "at,24c1024";
+		compatible = "atmel,24c1024";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 6dd13b98aaba..13759db99d81 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -158,7 +158,7 @@
 
 &i2c0 {
 	dtt@50 {
-		compatible = "at,24c1024";
+		compatible = "atmel,24c1024";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 528667618db4..e6de1ae33c73 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -55,7 +55,7 @@
 
 &i2c0 {
 	dtt@50 {
-		compatible = "at,24c1024";
+		compatible = "atmel,24c1024";
 		reg = <0x50>;
 	};
 };
-- 
cgit v1.2.3


From a8c0961b909ec7be25309c9bf1bc26bce488658c Mon Sep 17 00:00:00 2001
From: Franklin S Cooper Jr <fcooper@ti.com>
Date: Wed, 6 Dec 2017 09:52:25 -0800
Subject: ARM: dts: k2g: Add UART 1 and 2 instances

Add DT nodes for two other UART instances of 66AK2G SoC.

Also add power domain and clock domain nodes to UART 0

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g.dtsi | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index ef82c0a6e607..3c48a9f5c882 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -28,6 +28,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -114,7 +116,32 @@
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
-			clock-frequency = <200000000>;
+			clocks = <&k2g_clks 0x2c 0>;
+			power-domains = <&k2g_pds 0x2c>;
+			status = "disabled";
+		};
+
+		uart1: serial@02531000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531000 0x100>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&k2g_clks 0x2d 0>;
+			power-domains = <&k2g_pds 0x2d>;
+			status = "disabled";
+		};
+
+		uart2: serial@02531400 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531400 0x100>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&k2g_clks 0x2e 0>;
+			power-domains = <&k2g_pds 0x2e>;
 			status = "disabled";
 		};
 
-- 
cgit v1.2.3


From 7fbec17465fca1df1b204eda79e07e52f9693c8d Mon Sep 17 00:00:00 2001
From: Franklin S Cooper Jr <fcooper@ti.com>
Date: Wed, 6 Dec 2017 09:53:04 -0800
Subject: ARM: dts: k2g-evm: Enable UART 2

66AK2G GP EVM has a Baseboard Management Controller (BMC) on board.
This controller handles things like setting the SoCs boot mode along
with controlling the on board character LCD display module.

Enable UART2 which communicates with the BMC. This enables userspace
applications to display something on the onboard LCD controlled by the
BMC.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 8d100217e38f..9737730ddc21 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -115,6 +115,13 @@
 			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
 		>;
 	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart2_rxd.uart2_rxd */
+			K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart2_txd.uart2_txd */
+		>;
+	};
 };
 
 &uart0 {
@@ -263,3 +270,9 @@
 		};
 	};
 };
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
-- 
cgit v1.2.3


From d6392ae36be3ab5019671f57997fb3f7a189cf10 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 00:45:34 -0600
Subject: ARM: dts: keystone*: Standardize license with SPDX tag

Standardize the licenses with SPDX license tag and standardize TI's
copyright statement to be consistently after file description.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-clocks.dtsi      |  7 ++-----
 arch/arm/boot/dts/keystone-k2e-clocks.dtsi  |  7 ++-----
 arch/arm/boot/dts/keystone-k2e-evm.dts      |  7 ++-----
 arch/arm/boot/dts/keystone-k2e-netcp.dtsi   |  7 ++-----
 arch/arm/boot/dts/keystone-k2e.dtsi         |  7 ++-----
 arch/arm/boot/dts/keystone-k2g-evm.dts      | 12 ++----------
 arch/arm/boot/dts/keystone-k2g-ice.dts      |  3 +--
 arch/arm/boot/dts/keystone-k2g.dtsi         | 12 ++----------
 arch/arm/boot/dts/keystone-k2hk-clocks.dtsi |  7 ++-----
 arch/arm/boot/dts/keystone-k2hk-evm.dts     |  7 ++-----
 arch/arm/boot/dts/keystone-k2hk-netcp.dtsi  |  7 ++-----
 arch/arm/boot/dts/keystone-k2hk.dtsi        |  7 ++-----
 arch/arm/boot/dts/keystone-k2l-clocks.dtsi  |  7 ++-----
 arch/arm/boot/dts/keystone-k2l-evm.dts      |  7 ++-----
 arch/arm/boot/dts/keystone-k2l-netcp.dtsi   |  7 ++-----
 arch/arm/boot/dts/keystone-k2l.dtsi         |  7 ++-----
 arch/arm/boot/dts/keystone.dtsi             |  7 ++-----
 17 files changed, 33 insertions(+), 92 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index 0c334b25781e..f23147093fd8 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Keystone 2 clock tree
  *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index d56d68fe7ffc..915a99d5bc5e 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2014 Texas Instruments, Inc.
- *
  * Keystone 2 Edison SoC specific device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 2c59f4cb3b44..5378b858fb6f 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
  * Keystone 2 Edison EVM device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index ba828cb59587..a17311c602aa 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Keystone 2 Edison Netcp driver
  *
- * Copyright 2015 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 6b796b52ff4f..db4560b929f1 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
  * Keystone 2 Edison soc device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 9737730ddc21..6a4657799b99 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for K2G EVM
  *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 1736eb53ad83..d820ed2474bb 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for K2G Industrial Communication Engine EVM
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 3c48a9f5c882..8b04652b703f 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for K2G SOC
  *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
index af9b7190533a..560475346fda 100644
--- a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
  * Keystone 2 Kepler/Hawking SoC clock nodes
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 13759db99d81..8ea5a584e828 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
  * Keystone 2 Kepler/Hawking EVM device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index a5ac845464bf..b88c0689c285 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Keystone 2 Hawking Netcp driver
  *
- * Copyright 2015 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 7c486d9dc90e..71c1dcf4159f 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
  * Keystone 2 Kepler/Hawking soc specific device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
index ef8464bb11ff..b3f82040a722 100644
--- a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
  * Keystone 2 lamarr SoC clock nodes
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index e6de1ae33c73..61f63437b886 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2014 Texas Instruments, Inc.
- *
  * Keystone 2 Lamarr EVM device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index 66f615a74118..9ec84228bc16 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Keystone 2 Lamarr Netcp driver
  *
- * Copyright 2015 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index cc771139c9ce..85b5481213d0 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2014 Texas Instruments, Inc.
- *
  * Keystone 2 Lamarr SoC specific device tree
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 06e10544f9b1..ca2cc5d8e3b5 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
cgit v1.2.3


From eb08c33f9faebc7969206f176dc8d7e02e0e3e57 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 00:09:47 -0600
Subject: ARM: dts: keystone*: Use a single soc0 instance

Provide a soc0 node and reference the same to simplify dts. This also
resolves the following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (unit_address_vs_reg): Node /soc has a reg or ranges property, but no unit name

NOTE: Though we can reformat files by reducing 1 level of indent due to
the use of soc0 phandle, we omit that change to prevent un-necessary
churn in code base.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2e-evm.dts  |  4 +--
 arch/arm/boot/dts/keystone-k2e.dtsi     |  4 +--
 arch/arm/boot/dts/keystone-k2g.dtsi     |  2 +-
 arch/arm/boot/dts/keystone-k2hk-evm.dts | 50 ++++++++++++++++-----------------
 arch/arm/boot/dts/keystone-k2hk.dtsi    |  4 +--
 arch/arm/boot/dts/keystone-k2l-evm.dts  |  4 +--
 arch/arm/boot/dts/keystone-k2l.dtsi     |  4 +--
 arch/arm/boot/dts/keystone.dtsi         |  2 +-
 8 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 5378b858fb6f..66fec5f5d081 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -25,8 +25,9 @@
 			status = "okay";
 		};
 	};
+};
 
-	soc {
+&soc0 {
 
 		clocks {
 			refclksys: refclksys {
@@ -50,7 +51,6 @@
 				clock-output-names = "refclk-ddr3a";
 			};
 		};
-	};
 };
 
 &usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index db4560b929f1..0bcd3f8a9c45 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -45,8 +45,9 @@
 	aliases {
 		rproc0 = &dsp0;
 	};
+};
 
-	soc {
+&soc0 {
 		/include/ "keystone-k2e-clocks.dtsi"
 
 		usb: usb@2680000 {
@@ -191,5 +192,4 @@
 			bus_freq	= <2500000>;
 		};
 		/include/ "keystone-k2e-netcp.dtsi"
-	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8b04652b703f..fd061718dc0a 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -69,7 +69,7 @@
 		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
 	};
 
-	soc {
+	soc0: soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		#pinctrl-cells = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index 8ea5a584e828..ad4e22afe133 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -26,7 +26,31 @@
 		};
 	};
 
-	soc {
+	leds {
+		compatible = "gpio-leds";
+		debug1_1 {
+			label = "keystone:green:debug1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+		};
+
+		debug1_2 {
+			label = "keystone:red:debug1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+		};
+
+		debug2 {
+			label = "keystone:blue:debug2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+		};
+
+		debug3 {
+			label = "keystone:blue:debug3";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+		};
+	};
+};
+
+&soc0 {
 		clocks {
 			refclksys: refclksys {
 				#clock-cells = <0>;
@@ -63,30 +87,6 @@
 				clock-output-names = "refclk-ddr3b";
 			};
 		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		debug1_1 {
-			label = "keystone:green:debug1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
-		};
-
-		debug1_2 {
-			label = "keystone:red:debug1";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
-		};
-
-		debug2 {
-			label = "keystone:blue:debug2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
-		};
-
-		debug3 {
-			label = "keystone:blue:debug3";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
-		};
-	};
 };
 
 &usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 71c1dcf4159f..ed59474522cb 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -52,8 +52,9 @@
 		rproc6 = &dsp6;
 		rproc7 = &dsp7;
 	};
+};
 
-	soc {
+&soc0 {
 		/include/ "keystone-k2hk-clocks.dtsi"
 
 		msm_ram: msmram@c000000 {
@@ -281,5 +282,4 @@
 			bus_freq	= <2500000>;
 		};
 		/include/ "keystone-k2hk-netcp.dtsi"
-	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 61f63437b886..e200533d26a4 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -25,8 +25,9 @@
 			status = "okay";
 		};
 	};
+};
 
-	soc {
+&soc0 {
 		clocks {
 			refclksys: refclksys {
 				#clock-cells = <0>;
@@ -35,7 +36,6 @@
 				clock-output-names = "refclk-sys";
 			};
 		};
-	};
 };
 
 &usb_phy {
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 85b5481213d0..b61a830f4a4d 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -36,8 +36,9 @@
 		rproc2 = &dsp2;
 		rproc3 = &dsp3;
 	};
+};
 
-	soc {
+&soc0 {
 		/include/ "keystone-k2l-clocks.dtsi"
 
 		uart2: serial@2348400 {
@@ -391,7 +392,6 @@
 			bus_freq	= <2500000>;
 		};
 		/include/ "keystone-k2l-netcp.dtsi"
-	};
 };
 
 &spi0 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index ca2cc5d8e3b5..0e8d094515cc 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -67,7 +67,7 @@
 		cpu_on		= <0x84000003>;
 	};
 
-	soc {
+	soc0: soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "ti,keystone","simple-bus";
-- 
cgit v1.2.3


From d2a3ec71eb54759307bc38bd4904bf309ae802ae Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 01:02:14 -0600
Subject: ARM: dts: keystone: Get rid of usage of skeleton.dtsi

skeleton.dtsi doesn't offer us any real benefits with most of the
parameters being overridden. So, just drop the same entirely and
introduce appropriate changes for chosen node and memory back to
our top level definition.

This also squashes the following warnings with W=1:

arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone.dtsi | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 0e8d094515cc..01496910587a 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -6,8 +6,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,keystone";
 	model = "Texas Instruments Keystone 2 SoC";
@@ -22,7 +20,10 @@
 		spi2 = &spi2;
 	};
 
-	memory {
+	chosen { };
+
+	memory: memory@80000000 {
+		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
 
-- 
cgit v1.2.3


From 9879d45ad9c0ef33eb50625ae6c008ca23a4653a Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 01:07:00 -0600
Subject: ARM: dts: keystone: Add missing unit name to interrupt controller

Add base address for GIC as unit address. This also squashes the
following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /interrupt-controller has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /interrupt-controller has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /interrupt-controller has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 01496910587a..93ea5c69ea77 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -27,7 +27,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
 
-	gic: interrupt-controller {
+	gic: interrupt-controller@2561000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-- 
cgit v1.2.3


From df803639ee4fc83be8e6a4646279e34955eed285 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 01:15:49 -0600
Subject: ARM: dts: keystone-clocks: Add missing unit name to clock nodes that
 have regs

Add the control register as the base for the clock nodes which are
missing them. This squashes some 78 warnings of the effect when built
with W=1.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-clocks.dtsi | 52 +++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index f23147093fd8..457515b0736a 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -48,7 +48,7 @@ clocks {
 		clock-output-names = "gemtraceclk";
 	};
 
-	chipstmxptclk: chipstmxptclk {
+	chipstmxptclk: chipstmxptclk@2310164 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-divider-clock";
 		clocks = <&mainmuxclk>;
@@ -157,7 +157,7 @@ clocks {
 		clock-output-names = "chipclk1rstiso112";
 	};
 
-	clkmodrst0: clkmodrst0 {
+	clkmodrst0: clkmodrst0@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
@@ -168,7 +168,7 @@ clocks {
 	};
 
 
-	clkusb: clkusb {
+	clkusb: clkusb@2350008 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
@@ -178,7 +178,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkaemifspi: clkaemifspi {
+	clkaemifspi: clkaemifspi@235000c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
@@ -189,7 +189,7 @@ clocks {
 	};
 
 
-	clkdebugsstrc: clkdebugsstrc {
+	clkdebugsstrc: clkdebugsstrc@2350014 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -199,7 +199,7 @@ clocks {
 		domain-id = <1>;
 	};
 
-	clktetbtrc: clktetbtrc {
+	clktetbtrc: clktetbtrc@2350018 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -209,7 +209,7 @@ clocks {
 		domain-id = <1>;
 	};
 
-	clkpa: clkpa {
+	clkpa: clkpa@235001c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&paclk13>;
@@ -219,7 +219,7 @@ clocks {
 		domain-id = <2>;
 	};
 
-	clkcpgmac: clkcpgmac {
+	clkcpgmac: clkcpgmac@2350020 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkpa>;
@@ -229,7 +229,7 @@ clocks {
 		domain-id = <2>;
 	};
 
-	clksa: clksa {
+	clksa: clksa@2350024 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkpa>;
@@ -239,7 +239,7 @@ clocks {
 		domain-id = <2>;
 	};
 
-	clkpcie: clkpcie {
+	clkpcie: clkpcie@2350028 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -249,7 +249,7 @@ clocks {
 		domain-id = <3>;
 	};
 
-	clksr: clksr {
+	clksr: clksr@2350034 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1rstiso112>;
@@ -259,7 +259,7 @@ clocks {
 		domain-id = <6>;
 	};
 
-	clkgem0: clkgem0 {
+	clkgem0: clkgem0@235003c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -269,7 +269,7 @@ clocks {
 		domain-id = <8>;
 	};
 
-	clkddr30: clkddr30 {
+	clkddr30: clkddr30@235005c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -279,7 +279,7 @@ clocks {
 		domain-id = <16>;
 	};
 
-	clkwdtimer0: clkwdtimer0 {
+	clkwdtimer0: clkwdtimer0@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -289,7 +289,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkwdtimer1: clkwdtimer1 {
+	clkwdtimer1: clkwdtimer1@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -299,7 +299,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkwdtimer2: clkwdtimer2 {
+	clkwdtimer2: clkwdtimer2@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -309,7 +309,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkwdtimer3: clkwdtimer3 {
+	clkwdtimer3: clkwdtimer3@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -319,7 +319,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clktimer15: clktimer15 {
+	clktimer15: clktimer15@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -329,7 +329,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkuart0: clkuart0 {
+	clkuart0: clkuart0@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -339,7 +339,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkuart1: clkuart1 {
+	clkuart1: clkuart1@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -349,7 +349,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkaemif: clkaemif {
+	clkaemif: clkaemif@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkaemifspi>;
@@ -359,7 +359,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkusim: clkusim {
+	clkusim: clkusim@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -369,7 +369,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clki2c: clki2c {
+	clki2c: clki2c@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -379,7 +379,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkspi: clkspi {
+	clkspi: clkspi@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkaemifspi>;
@@ -389,7 +389,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkgpio: clkgpio {
+	clkgpio: clkgpio@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -399,7 +399,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkkeymgr: clkkeymgr {
+	clkkeymgr: clkkeymgr@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
-- 
cgit v1.2.3


From bc683c7503d73df2ca381fec4e39138cef1a8950 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 01:25:06 -0600
Subject: ARM: dts: keystone-hk-clocks: Add missing unit name to clock nodes
 that have regs

Add the control register as the base for the clock nodes which are
missing them. This squashes some 36 warnings of the effect when built
with W=1.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2hk-clocks.dtsi | 74 ++++++++++++++---------------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
index 560475346fda..4ba6912176ef 100644
--- a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
@@ -50,7 +50,7 @@ clocks {
 		reg-names = "control";
 	};
 
-	clktsip: clktsip {
+	clktsip: clktsip@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
@@ -60,7 +60,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clksrio: clksrio {
+	clksrio: clksrio@235002c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1rstiso13>;
@@ -70,7 +70,7 @@ clocks {
 		domain-id = <4>;
 	};
 
-	clkhyperlink0: clkhyperlink0 {
+	clkhyperlink0: clkhyperlink0@2350030 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -80,7 +80,7 @@ clocks {
 		domain-id = <5>;
 	};
 
-	clkgem1: clkgem1 {
+	clkgem1: clkgem1@2350040 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -90,7 +90,7 @@ clocks {
 		domain-id = <9>;
 	};
 
-	clkgem2: clkgem2 {
+	clkgem2: clkgem2@2350044 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -100,7 +100,7 @@ clocks {
 		domain-id = <10>;
 	};
 
-	clkgem3: clkgem3 {
+	clkgem3: clkgem3@2350048 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -110,7 +110,7 @@ clocks {
 		domain-id = <11>;
 	};
 
-	clkgem4: clkgem4 {
+	clkgem4: clkgem4@235004c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -120,7 +120,7 @@ clocks {
 		domain-id = <12>;
 	};
 
-	clkgem5: clkgem5 {
+	clkgem5: clkgem5@2350050 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -130,7 +130,7 @@ clocks {
 		domain-id = <13>;
 	};
 
-	clkgem6: clkgem6 {
+	clkgem6: clkgem6@2350054 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -140,7 +140,7 @@ clocks {
 		domain-id = <14>;
 	};
 
-	clkgem7: clkgem7 {
+	clkgem7: clkgem7@2350058 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -150,7 +150,7 @@ clocks {
 		domain-id = <15>;
 	};
 
-	clkddr31: clkddr31 {
+	clkddr31: clkddr31@2350060 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -160,7 +160,7 @@ clocks {
 		domain-id = <16>;
 	};
 
-	clktac: clktac {
+	clktac: clktac@2350064 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -170,7 +170,7 @@ clocks {
 		domain-id = <17>;
 	};
 
-	clkrac01: clkrac01 {
+	clkrac01: clkrac01@2350068 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -180,7 +180,7 @@ clocks {
 		domain-id = <17>;
 	};
 
-	clkrac23: clkrac23 {
+	clkrac23: clkrac23@235006c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -190,7 +190,7 @@ clocks {
 		domain-id = <18>;
 	};
 
-	clkfftc0: clkfftc0 {
+	clkfftc0: clkfftc0@2350070 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -200,7 +200,7 @@ clocks {
 		domain-id = <19>;
 	};
 
-	clkfftc1: clkfftc1 {
+	clkfftc1: clkfftc1@2350074 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -210,7 +210,7 @@ clocks {
 		domain-id = <19>;
 	};
 
-	clkfftc2: clkfftc2 {
+	clkfftc2: clkfftc2@2350078 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -220,7 +220,7 @@ clocks {
 		domain-id = <20>;
 	};
 
-	clkfftc3: clkfftc3 {
+	clkfftc3: clkfftc3@235007c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -230,7 +230,7 @@ clocks {
 		domain-id = <20>;
 	};
 
-	clkfftc4: clkfftc4 {
+	clkfftc4: clkfftc4@2350080 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -240,7 +240,7 @@ clocks {
 		domain-id = <20>;
 	};
 
-	clkfftc5: clkfftc5 {
+	clkfftc5: clkfftc5@2350084 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -250,7 +250,7 @@ clocks {
 		domain-id = <20>;
 	};
 
-	clkaif: clkaif {
+	clkaif: clkaif@2350088 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -260,7 +260,7 @@ clocks {
 		domain-id = <21>;
 	};
 
-	clktcp3d0: clktcp3d0 {
+	clktcp3d0: clktcp3d0@235008c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -270,7 +270,7 @@ clocks {
 		domain-id = <22>;
 	};
 
-	clktcp3d1: clktcp3d1 {
+	clktcp3d1: clktcp3d1@2350090 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -280,7 +280,7 @@ clocks {
 		domain-id = <22>;
 	};
 
-	clktcp3d2: clktcp3d2 {
+	clktcp3d2: clktcp3d2@2350094 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -290,7 +290,7 @@ clocks {
 		domain-id = <23>;
 	};
 
-	clktcp3d3: clktcp3d3 {
+	clktcp3d3: clktcp3d3@2350098 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -300,7 +300,7 @@ clocks {
 		domain-id = <23>;
 	};
 
-	clkvcp0: clkvcp0 {
+	clkvcp0: clkvcp0@235009c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -310,7 +310,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp1: clkvcp1 {
+	clkvcp1: clkvcp1@23500a0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -320,7 +320,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp2: clkvcp2 {
+	clkvcp2: clkvcp2@23500a4 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -330,7 +330,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp3: clkvcp3 {
+	clkvcp3: clkvcp3@23500a8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -340,7 +340,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp4: clkvcp4 {
+	clkvcp4: clkvcp4@23500ac {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -350,7 +350,7 @@ clocks {
 		domain-id = <25>;
 	};
 
-	clkvcp5: clkvcp5 {
+	clkvcp5: clkvcp5@23500b0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -360,7 +360,7 @@ clocks {
 		domain-id = <25>;
 	};
 
-	clkvcp6: clkvcp6 {
+	clkvcp6: clkvcp6@23500b4 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -370,7 +370,7 @@ clocks {
 		domain-id = <25>;
 	};
 
-	clkvcp7: clkvcp7 {
+	clkvcp7: clkvcp7@23500b8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -380,7 +380,7 @@ clocks {
 		domain-id = <25>;
 	};
 
-	clkbcp: clkbcp {
+	clkbcp: clkbcp@23500bc {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -390,7 +390,7 @@ clocks {
 		domain-id = <26>;
 	};
 
-	clkdxb: clkdxb {
+	clkdxb: clkdxb@23500c0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -400,7 +400,7 @@ clocks {
 		domain-id = <27>;
 	};
 
-	clkhyperlink1: clkhyperlink1 {
+	clkhyperlink1: clkhyperlink1@23500c4 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -410,7 +410,7 @@ clocks {
 		domain-id = <28>;
 	};
 
-	clkxge: clkxge {
+	clkxge: clkxge@23500c8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
-- 
cgit v1.2.3


From 95d8b41c765b8ec726fc9c7f7d42777e7c4af860 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 01:38:48 -0600
Subject: ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes
 that have regs

Add the control register as the base for the clock nodes which are
missing them. This squashes the following warnings of the effect when built
with W=1:
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkusb1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkhyperlink0 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkpcie1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkxge has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index 915a99d5bc5e..5e0e7d232161 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -32,7 +32,7 @@ clocks {
 		reg-names = "control";
 	};
 
-	clkusb1: clkusb1 {
+	clkusb1: clkusb1@2350004 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
@@ -42,7 +42,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkhyperlink0: clkhyperlink0 {
+	clkhyperlink0: clkhyperlink02350030 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -52,7 +52,7 @@ clocks {
 		domain-id = <5>;
 	};
 
-	clkpcie1: clkpcie1 {
+	clkpcie1: clkpcie1@235006c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -62,7 +62,7 @@ clocks {
 		domain-id = <18>;
 	};
 
-	clkxge: clkxge {
+	clkxge: clkxge@23500c8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
-- 
cgit v1.2.3


From 4fe85b0cdd06f8fef2631923799bdc95380badb5 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 15 Dec 2017 07:09:28 -0600
Subject: ARM: dts: keystone-k2l-clocks: Add missing unit name to clock nodes
 that have regs

Add the control register as the base for the clock nodes which are
missing them. This squashes some 22 warnings of the effect when built
with W=1.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
---
 arch/arm/boot/dts/keystone-k2l-clocks.dtsi | 44 +++++++++++++++---------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
index b3f82040a722..635528064dea 100644
--- a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
@@ -41,7 +41,7 @@ clocks {
 		reg-names = "control";
 	};
 
-	clkdfeiqnsys: clkdfeiqnsys {
+	clkdfeiqnsys: clkdfeiqnsys@2350004 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -51,7 +51,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkpcie1: clkpcie1 {
+	clkpcie1: clkpcie1@235002c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -61,7 +61,7 @@ clocks {
 		domain-id = <4>;
 	};
 
-	clkgem1: clkgem1 {
+	clkgem1: clkgem1@2350040 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -71,7 +71,7 @@ clocks {
 		domain-id = <9>;
 	};
 
-	clkgem2: clkgem2 {
+	clkgem2: clkgem2@2350044 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -81,7 +81,7 @@ clocks {
 		domain-id = <10>;
 	};
 
-	clkgem3: clkgem3 {
+	clkgem3: clkgem3@2350048 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk1>;
@@ -91,7 +91,7 @@ clocks {
 		domain-id = <11>;
 	};
 
-	clktac: clktac {
+	clktac: clktac@2350064 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -101,7 +101,7 @@ clocks {
 		domain-id = <17>;
 	};
 
-	clkrac: clkrac {
+	clkrac: clkrac@2350068 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -111,7 +111,7 @@ clocks {
 		domain-id = <17>;
 	};
 
-	clkdfepd0: clkdfepd0 {
+	clkdfepd0: clkdfepd0@235006c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -121,7 +121,7 @@ clocks {
 		domain-id = <18>;
 	};
 
-	clkfftc0: clkfftc0 {
+	clkfftc0: clkfftc0@2350070 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -131,7 +131,7 @@ clocks {
 		domain-id = <19>;
 	};
 
-	clkosr: clkosr {
+	clkosr: clkosr@2350088 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -141,7 +141,7 @@ clocks {
 		domain-id = <21>;
 	};
 
-	clktcp3d0: clktcp3d0 {
+	clktcp3d0: clktcp3d0@235008c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -151,7 +151,7 @@ clocks {
 		domain-id = <22>;
 	};
 
-	clktcp3d1: clktcp3d1 {
+	clktcp3d1: clktcp3d1@2350094 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -161,7 +161,7 @@ clocks {
 		domain-id = <23>;
 	};
 
-	clkvcp0: clkvcp0 {
+	clkvcp0: clkvcp0@235009c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -171,7 +171,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp1: clkvcp1 {
+	clkvcp1: clkvcp1@23500a0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -181,7 +181,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp2: clkvcp2 {
+	clkvcp2: clkvcp2@23500a4 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -191,7 +191,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkvcp3: clkvcp3 {
+	clkvcp3: clkvcp3@23500a8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -201,7 +201,7 @@ clocks {
 		domain-id = <24>;
 	};
 
-	clkbcp: clkbcp {
+	clkbcp: clkbcp@23500bc {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -211,7 +211,7 @@ clocks {
 		domain-id = <26>;
 	};
 
-	clkdfepd1: clkdfepd1 {
+	clkdfepd1: clkdfepd1@23500c0 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -221,7 +221,7 @@ clocks {
 		domain-id = <27>;
 	};
 
-	clkfftc1: clkfftc1 {
+	clkfftc1: clkfftc1@23500c4 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -231,7 +231,7 @@ clocks {
 		domain-id = <28>;
 	};
 
-	clkiqnail: clkiqnail {
+	clkiqnail: clkiqnail@23500c8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
@@ -241,7 +241,7 @@ clocks {
 		domain-id = <29>;
 	};
 
-	clkuart2: clkuart2 {
+	clkuart2: clkuart2@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
@@ -251,7 +251,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkuart3: clkuart3 {
+	clkuart3: clkuart3@2350000 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&clkmodrst0>;
-- 
cgit v1.2.3