From 0e6a73b1e6ba59d9fd8d9bffeea1561954de53b4 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 8 May 2018 08:59:29 -0500 Subject: ARM: dts: omap: fix OF graph in omap3-devkit8000 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit omap3-devkit8000-common.dtsi defines a graph connection for DVI, but then omap3-devkit8000-lcd-common.dtsi overrides that with a graph connection for the LCD as the same output signals are used. This leaves an incomplete graph as the TFP410 output has only half a connection. The result is the following warning: arch/arm/boot/dts/omap3-devkit8000-lcd70.dtb: Warning (graph_endpoint): /encoder0/ports/port@0/endpoint: graph connection to node '/ocp@68000000/dss@48050000/port/endpoint' is not bidirectional Fix this by defining multiple endpoints which is the correct way to show a 1 to many connection. Cc: "Benoît Cousson" Cc: Tony Lindgren Signed-off-by: Rob Herring Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 9 ++++++++- arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 5 ++++- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 0c0bb1b01b0b..746a658e84b6 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -349,10 +349,17 @@ vdda_dac-supply = <&vdac>; port { - dpi_dvi_out: endpoint { + #address-cells = <1>; + #size-cells = <0>; + dpi_dvi_out: endpoint@0 { + reg = <0>; remote-endpoint = <&tfp410_in>; data-lines = <24>; }; + + endpoint@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 2d64bcffaaa8..1093387259e2 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -30,7 +30,10 @@ &dss { port { - dpi_lcd_out: endpoint { + #address-cells = <1>; + #size-cells = <0>; + dpi_lcd_out: endpoint@1 { + reg = <1>; remote-endpoint = <&lcd_in>; data-lines = <24>; }; -- cgit v1.2.3