From 0d9363c5f7fa99e25a9adbd52c078bdd3f221314 Mon Sep 17 00:00:00 2001 From: Georgiana Chelu Date: Mon, 7 Mar 2016 10:31:54 +0200 Subject: Staging: iio: Fixed block comments warning Fixed the following warning: WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Georgiana Chelu Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/accel/lis3l02dq.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h index 3f24c629be6f..6bd3d4d5bc9d 100644 --- a/drivers/staging/iio/accel/lis3l02dq.h +++ b/drivers/staging/iio/accel/lis3l02dq.h @@ -67,7 +67,8 @@ #define LIS3L02DQ_REG_CTRL_2_THREE_WIRE_SPI_MODE 0x02 /* Data alignment, default is 12 bit right justified - * - option for 16 bit left justified */ + * - option for 16 bit left justified + */ #define LIS3L02DQ_REG_CTRL_2_DATA_ALIGNMENT_16_BIT_LEFT_JUSTIFIED 0x01 /* Interrupt related stuff */ @@ -77,7 +78,8 @@ #define LIS3L02DQ_REG_WAKE_UP_CFG_BOOLEAN_AND 0x80 /* Latch interrupt request, - * if on ack must be given by reading the ack register */ + * if on ack must be given by reading the ack register + */ #define LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC 0x40 /* Z Interrupt on High (above threshold) */ @@ -94,7 +96,8 @@ #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW 0x01 /* Register that gives description of what caused interrupt - * - latched if set in CFG_ADDRES */ + * - latched if set in CFG_ADDRES + */ #define LIS3L02DQ_REG_WAKE_UP_SRC_ADDR 0x24 /* top bit ignored */ /* Interrupt Active */ @@ -123,7 +126,8 @@ #define LIS3L02DQ_REG_STATUS_X_NEW_DATA 0x01 /* The accelerometer readings - low and high bytes. - * Form of high byte dependent on justification set in ctrl reg */ + * Form of high byte dependent on justification set in ctrl reg + */ #define LIS3L02DQ_REG_OUT_X_L_ADDR 0x28 #define LIS3L02DQ_REG_OUT_X_H_ADDR 0x29 #define LIS3L02DQ_REG_OUT_Y_L_ADDR 0x2A @@ -132,7 +136,8 @@ #define LIS3L02DQ_REG_OUT_Z_H_ADDR 0x2D /* Threshold values for all axes and both above and below thresholds - * - i.e. there is only one value */ + * - i.e. there is only one value + */ #define LIS3L02DQ_REG_THS_L_ADDR 0x2E #define LIS3L02DQ_REG_THS_H_ADDR 0x2F -- cgit v1.2.3