From 852fb2ac76241868454d07818ea0d87fcd9e5301 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Apr 2008 12:07:04 +0200 Subject: i2c-ibm_iic: Fast mode parm desc fixup Noticed this when grepping for fast mode module params, the i2c-ibm_iic driver was using a non-existent variable for MODULE_PARM_DESC. Fix it up to reflect what it's actually supposed to be describing. Signed-off-by: Paul Mundt Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ibm_iic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 7c7eb0cfeceb..22bb247d0e60 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -55,7 +55,7 @@ MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); static int iic_force_fast; module_param(iic_force_fast, bool, 0); -MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)"); +MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)"); #define DBG_LEVEL 0 -- cgit v1.2.3 From b73a9aece56594bdb73712c8b9a8a4ad05fdeb33 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Fri, 11 Apr 2008 12:07:05 +0200 Subject: i2c-davinci: Fix lost interrupt DAVINCI_I2C_STR_REG is a write 1 to clear register, so don't use a read/modify/write cycle. Signed-off-by: Troy Kisky Acked-by: Dirk Behme Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index cce5a614758d..fde26345a379 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -382,9 +382,8 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) break; case DAVINCI_I2C_IVR_ARDY: - w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG); - MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1); - davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w); + davinci_i2c_write_reg(dev, + DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY); complete(&dev->cmd_complete); break; @@ -397,12 +396,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) if (dev->buf_len) continue; - w = davinci_i2c_read_reg(dev, - DAVINCI_I2C_STR_REG); - MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0); davinci_i2c_write_reg(dev, - DAVINCI_I2C_STR_REG, - w); + DAVINCI_I2C_STR_REG, + DAVINCI_I2C_IMR_RRDY); } else dev_err(dev->dev, "RDR IRQ while no " "data requested\n"); @@ -428,9 +424,8 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) break; case DAVINCI_I2C_IVR_SCD: - w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG); - MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1); - davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w); + davinci_i2c_write_reg(dev, + DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD); complete(&dev->cmd_complete); break; -- cgit v1.2.3 From fa16eefd3e835dd81c688a2a743eb59331162ed5 Mon Sep 17 00:00:00 2001 From: Till Harbaum Date: Fri, 11 Apr 2008 12:07:05 +0200 Subject: i2c-tiny-usb: New VID/PID pair I have recently bought some USB PIDs from EZPrototypes for my USB projects and one will be for the i2c-tiny-usb. I have not yet started to use the new one in the official i2c-tiny-usb firmware since i think it makes sense to get the change into the kernel before releasing a modified firmware. This patch adds support for the EZPrototypes USB vid/pid pair used in later i2c-tiny-usb firmware versions (avrusb v1.06 and up, usbtiny v2.06 and up). Signed-off-by: Till Harbaum Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-tiny-usb.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index cb9abe7565a7..b1c050ff311d 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -131,11 +131,15 @@ static const struct i2c_algorithm usb_algorithm = { /* ----- begin of usb layer ---------------------------------------------- */ -/* The usb i2c interface uses a vid/pid pair donated by */ -/* Future Technology Devices International Ltd. */ +/* + * Initially the usb i2c interface uses a vid/pid pair donated by + * Future Technology Devices International Ltd., later a pair was + * bought from EZPrototypes + */ static struct usb_device_id i2c_tiny_usb_table [] = { - { USB_DEVICE(0x0403, 0xc631) }, - { } /* Terminating entry */ + { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */ + { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */ + { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table); -- cgit v1.2.3