From bd8a71a7b0f50da9350d202d325c3926ffd6b189 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 3 Jan 2009 16:56:56 +0000 Subject: ALSA: Reduce boilerplate for new jack types Use a lookup table rather than explicit code to map input subsystem jack types into ASoC ones, implemented as suggested by Takashi Iwai. Signed-off-by: Mark Brown --- include/sound/jack.h | 3 +++ sound/core/jack.c | 44 ++++++++++++++++++++------------------------ 2 files changed, 23 insertions(+), 24 deletions(-) diff --git a/include/sound/jack.h b/include/sound/jack.h index 2e0315cdd0d6..85266a2f5c6f 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -30,6 +30,9 @@ struct input_dev; /** * Jack types which can be reported. These values are used as a * bitmask. + * + * Note that this must be kept in sync with the lookup table in + * sound/core/jack.c. */ enum snd_jack_types { SND_JACK_HEADPHONE = 0x0001, diff --git a/sound/core/jack.c b/sound/core/jack.c index dd4a12dc09aa..b2da10c9916a 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -23,6 +23,13 @@ #include #include +static int jack_types[] = { + SW_HEADPHONE_INSERT, + SW_MICROPHONE_INSERT, + SW_LINEOUT_INSERT, + SW_JACK_PHYSICAL_INSERT, +}; + static int snd_jack_dev_free(struct snd_device *device) { struct snd_jack *jack = device->device_data; @@ -79,6 +86,7 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, { struct snd_jack *jack; int err; + int i; static struct snd_device_ops ops = { .dev_free = snd_jack_dev_free, .dev_register = snd_jack_dev_register, @@ -100,18 +108,10 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, jack->type = type; - if (type & SND_JACK_HEADPHONE) - input_set_capability(jack->input_dev, EV_SW, - SW_HEADPHONE_INSERT); - if (type & SND_JACK_LINEOUT) - input_set_capability(jack->input_dev, EV_SW, - SW_LINEOUT_INSERT); - if (type & SND_JACK_MICROPHONE) - input_set_capability(jack->input_dev, EV_SW, - SW_MICROPHONE_INSERT); - if (type & SND_JACK_MECHANICAL) - input_set_capability(jack->input_dev, EV_SW, - SW_JACK_PHYSICAL_INSERT); + for (i = 0; i < ARRAY_SIZE(jack_types); i++) + if (type & (1 << i)) + input_set_capability(jack->input_dev, EV_SW, + jack_types[i]); err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops); if (err < 0) @@ -154,21 +154,17 @@ EXPORT_SYMBOL(snd_jack_set_parent); */ void snd_jack_report(struct snd_jack *jack, int status) { + int i; + if (!jack) return; - if (jack->type & SND_JACK_HEADPHONE) - input_report_switch(jack->input_dev, SW_HEADPHONE_INSERT, - status & SND_JACK_HEADPHONE); - if (jack->type & SND_JACK_LINEOUT) - input_report_switch(jack->input_dev, SW_LINEOUT_INSERT, - status & SND_JACK_LINEOUT); - if (jack->type & SND_JACK_MICROPHONE) - input_report_switch(jack->input_dev, SW_MICROPHONE_INSERT, - status & SND_JACK_MICROPHONE); - if (jack->type & SND_JACK_MECHANICAL) - input_report_switch(jack->input_dev, SW_JACK_PHYSICAL_INSERT, - status & SND_JACK_MECHANICAL); + for (i = 0; i < ARRAY_SIZE(jack_types); i++) { + int testbit = 1 << i; + if (jack->type & testbit) + input_report_switch(jack->input_dev, jack_types[i], + status & testbit); + } input_sync(jack->input_dev); } -- cgit v1.2.3 From c8334dc8fb6413b363df3e1419e287f5b25bce32 Mon Sep 17 00:00:00 2001 From: James Morris Date: Wed, 7 Jan 2009 20:06:18 +1100 Subject: maintainers: add security subsystem wiki Add url to the security subsystem wiki. Signed-off-by: James Morris --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index ceb32ee51f9d..6bd7d47ab9db 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3783,6 +3783,7 @@ M: jmorris@namei.org L: linux-kernel@vger.kernel.org L: linux-security-module@vger.kernel.org (suggested Cc:) T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +W: http://security.wiki.kernel.org/ S: Supported SECURITY CONTACT -- cgit v1.2.3 From d506fc322ec2af04fc47be83d796a1c9e1a16022 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 7 Jan 2009 11:54:25 +0200 Subject: ALSA: Add support for video out to the jack reporting API Add support for reporting new jack types SND_JACK_VIDEOOUT and SND_JACK_AVOUT (a combination of LINEOUT and VIDEOOUT) to the jack reporting API. Also add the corresponding SW_VIDEOOUT_INSERT switch to the input system header. Signed-off-by: Jani Nikula Signed-off-by: Mark Brown --- include/linux/input.h | 1 + include/sound/jack.h | 2 ++ sound/core/jack.c | 1 + 3 files changed, 4 insertions(+) diff --git a/include/linux/input.h b/include/linux/input.h index 9a6355f74db2..adc13322d1d2 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -661,6 +661,7 @@ struct input_absinfo { #define SW_DOCK 0x05 /* set = plugged into dock */ #define SW_LINEOUT_INSERT 0x06 /* set = inserted */ #define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ +#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) diff --git a/include/sound/jack.h b/include/sound/jack.h index 85266a2f5c6f..6b013c6f6a04 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -40,6 +40,8 @@ enum snd_jack_types { SND_JACK_HEADSET = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE, SND_JACK_LINEOUT = 0x0004, SND_JACK_MECHANICAL = 0x0008, /* If detected separately */ + SND_JACK_VIDEOOUT = 0x0010, + SND_JACK_AVOUT = SND_JACK_LINEOUT | SND_JACK_VIDEOOUT, }; struct snd_jack { diff --git a/sound/core/jack.c b/sound/core/jack.c index b2da10c9916a..43b10d6e522b 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -28,6 +28,7 @@ static int jack_types[] = { SW_MICROPHONE_INSERT, SW_LINEOUT_INSERT, SW_JACK_PHYSICAL_INSERT, + SW_VIDEOOUT_INSERT, }; static int snd_jack_dev_free(struct snd_device *device) -- cgit v1.2.3 From ca9c1aaec4187fc9922cfb6b283fffef89286943 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Tue, 6 Jan 2009 20:11:51 +0000 Subject: ASoC: dapm: Allow explictly named mixer controls This patch allows you to define the mixer paths as having the same name as the paths they represent. This is required to support codecs such as the wm9705 neatly without extra controls in the alsa mixer. Signed-off-by: Ian Molton --- Documentation/sound/alsa/soc/dapm.txt | 3 +++ include/sound/soc-dapm.h | 11 ++++++++ sound/soc/soc-dapm.c | 47 +++++++++++++++++++++++++++-------- 3 files changed, 50 insertions(+), 11 deletions(-) diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index 46f9684d0b29..9e6763264a2e 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -116,6 +116,9 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0), SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls, ARRAY_SIZE(wm8731_output_mixer_controls)), +If you dont want the mixer elements prefixed with the name of the mixer widget, +you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same +as for SND_SOC_DAPM_MIXER. 2.3 Platform/Machine domain Widgets ----------------------------------- diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 4af1083e3287..cc99dd404934 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -76,6 +76,11 @@ wcontrols, wncontrols)\ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} +#define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \ + wcontrols, wncontrols)\ +{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \ + .shift = wshift, .invert = winvert, .kcontrols = wcontrols, \ + .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \ { .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ .invert = winvert, .kcontrols = NULL, .num_kcontrols = 0} @@ -101,6 +106,11 @@ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \ + wcontrols, wncontrols, wevent, wflags) \ +{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, \ + .num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MICBIAS_E(wname, wreg, wshift, winvert, wevent, wflags) \ { .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ .invert = winvert, .kcontrols = NULL, .num_kcontrols = 0, \ @@ -263,6 +273,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */ snd_soc_dapm_value_mux, /* selects 1 analog signal from many inputs */ snd_soc_dapm_mixer, /* mixes several analog signals together */ + snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */ snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */ snd_soc_dapm_adc, /* analog to digital converter */ snd_soc_dapm_dac, /* digital to analog converter */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index ad0d801677c1..6362c7641ce5 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -54,14 +54,15 @@ static int dapm_up_seq[] = { snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac, - snd_soc_dapm_mixer, snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, - snd_soc_dapm_spk, snd_soc_dapm_post + snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga, + snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post }; + static int dapm_down_seq[] = { snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, - snd_soc_dapm_pga, snd_soc_dapm_mixer, snd_soc_dapm_dac, snd_soc_dapm_mic, - snd_soc_dapm_micbias, snd_soc_dapm_mux, snd_soc_dapm_value_mux, - snd_soc_dapm_post + snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer, + snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias, + snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post }; static int dapm_status = 1; @@ -101,7 +102,8 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, { switch (w->id) { case snd_soc_dapm_switch: - case snd_soc_dapm_mixer: { + case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: { int val; struct soc_mixer_control *mc = (struct soc_mixer_control *) w->kcontrols[i].private_value; @@ -347,15 +349,33 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, if (path->name != (char*)w->kcontrols[i].name) continue; - /* add dapm control with long name */ - name_len = 2 + strlen(w->name) - + strlen(w->kcontrols[i].name); + /* add dapm control with long name. + * for dapm_mixer this is the concatenation of the + * mixer and kcontrol name. + * for dapm_mixer_named_ctl this is simply the + * kcontrol name. + */ + name_len = strlen(w->kcontrols[i].name) + 1; + if (w->id == snd_soc_dapm_mixer) + name_len += 1 + strlen(w->name); + path->long_name = kmalloc(name_len, GFP_KERNEL); + if (path->long_name == NULL) return -ENOMEM; - snprintf(path->long_name, name_len, "%s %s", - w->name, w->kcontrols[i].name); + switch (w->id) { + case snd_soc_dapm_mixer: + default: + snprintf(path->long_name, name_len, "%s %s", + w->name, w->kcontrols[i].name); + break; + case snd_soc_dapm_mixer_named_ctl: + snprintf(path->long_name, name_len, "%s", + w->kcontrols[i].name); + break; + } + path->long_name[name_len - 1] = '\0'; path->kcontrol = snd_soc_cnew(&w->kcontrols[i], w, @@ -711,6 +731,7 @@ static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action) case snd_soc_dapm_adc: case snd_soc_dapm_pga: case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: if (w->name) { in = is_connected_input_ep(w); dapm_clear_walk(w->codec); @@ -822,6 +843,7 @@ static int dapm_mixer_update_power(struct snd_soc_dapm_widget *widget, int found = 0; if (widget->id != snd_soc_dapm_mixer && + widget->id != snd_soc_dapm_mixer_named_ctl && widget->id != snd_soc_dapm_switch) return -ENODEV; @@ -875,6 +897,7 @@ static ssize_t dapm_widget_show(struct device *dev, case snd_soc_dapm_adc: case snd_soc_dapm_pga: case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: if (w->name) count += sprintf(buf + count, "%s: %s\n", w->name, w->power ? "On":"Off"); @@ -1058,6 +1081,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_codec *codec, break; case snd_soc_dapm_switch: case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: ret = dapm_connect_mixer(codec, wsource, wsink, path, control); if (ret != 0) goto err; @@ -1135,6 +1159,7 @@ int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec) switch(w->id) { case snd_soc_dapm_switch: case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: dapm_new_mixer(codec, w); break; case snd_soc_dapm_mux: -- cgit v1.2.3 From 3195954da9cdb1cadb2059921c62e69d376c624f Mon Sep 17 00:00:00 2001 From: Andrea Borgia Date: Wed, 7 Jan 2009 22:58:50 +0100 Subject: ALSA: preliminary support for Toshiba SB-0500 The Toshiba Multimedia Center SB-0500 is a rebranded version of the Creative Technology SB Live! 24-bit External: it shares the same chipset and only has minor cosmetic differences. Remote controller works with alsa_usb module, basic audio is there and mixer controls are mostly untested. Signed-off-by: Andrea Borgia Signed-off-by: Takashi Iwai --- sound/usb/usbmixer.c | 15 ++++++++++----- sound/usb/usbmixer_maps.c | 5 +++++ 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 00397c8a765b..bc8bd00047ad 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -66,6 +66,7 @@ static const struct rc_config { { USB_ID(0x041e, 0x3000), 0, 1, 2, 1, 18, 0x0013 }, /* Extigy */ { USB_ID(0x041e, 0x3020), 2, 1, 6, 6, 18, 0x0013 }, /* Audigy 2 NX */ { USB_ID(0x041e, 0x3040), 2, 2, 6, 6, 2, 0x6e91 }, /* Live! 24-bit */ + { USB_ID(0x041e, 0x3048), 2, 2, 6, 6, 2, 0x6e91 }, /* Toshiba SB0500 */ }; struct usb_mixer_interface { @@ -1706,7 +1707,8 @@ static void snd_usb_mixer_memory_change(struct usb_mixer_interface *mixer, break; /* live24ext: 4 = line-in jack */ case 3: /* hp-out jack (may actuate Mute) */ - if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) + if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) snd_usb_mixer_notify_id(mixer, mixer->rc_cfg->mute_mixer_id); break; default: @@ -1956,8 +1958,9 @@ static int snd_audigy2nx_controls_create(struct usb_mixer_interface *mixer) int i, err; for (i = 0; i < ARRAY_SIZE(snd_audigy2nx_controls); ++i) { - if (i > 1 && /* Live24ext has 2 LEDs only */ - mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) + if (i > 1 && /* Live24ext has 2 LEDs only */ + (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048))) break; err = snd_ctl_add(mixer->chip->card, snd_ctl_new1(&snd_audigy2nx_controls[i], mixer)); @@ -1994,7 +1997,8 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry, snd_iprintf(buffer, "%s jacks\n\n", mixer->chip->card->shortname); if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020)) jacks = jacks_audigy2nx; - else if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) + else if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) jacks = jacks_live24ext; else return; @@ -2044,7 +2048,8 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, goto _error; if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) || - mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) { + mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) { struct snd_info_entry *entry; if ((err = snd_audigy2nx_controls_create(mixer)) < 0) diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c index d755be0ad811..f41214f3ad6b 100644 --- a/sound/usb/usbmixer_maps.c +++ b/sound/usb/usbmixer_maps.c @@ -284,6 +284,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x041e, 0x3040), .map = live24ext_map, }, + { + .id = USB_ID(0x041e, 0x3048), + .map = audigy2nx_map, + .selector_map = audigy2nx_selectors, + }, { /* Hercules DJ Console (Windows Edition) */ .id = USB_ID(0x06f8, 0xb000), -- cgit v1.2.3 From 1649923dd52ce914be98bff0ae352344ef04f305 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 7 Jan 2009 18:25:13 +0000 Subject: ASoC: Constify pin names for DAPM pin status APIs Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 8 ++++---- sound/soc/soc-dapm.c | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index cc99dd404934..075244ef41eb 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -260,10 +260,10 @@ int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, int snd_soc_dapm_sys_add(struct device *dev); /* dapm audio pin control and status */ -int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin); -int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin); -int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin); -int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin); +int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin); +int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin); +int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin); +int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin); int snd_soc_dapm_sync(struct snd_soc_codec *codec); /* dapm widget types */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 6362c7641ce5..a35ce69d9d78 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -961,7 +961,7 @@ static void dapm_free_widgets(struct snd_soc_codec *codec) } static int snd_soc_dapm_set_pin(struct snd_soc_codec *codec, - char *pin, int status) + const char *pin, int status) { struct snd_soc_dapm_widget *w; @@ -1643,7 +1643,7 @@ int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ -int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin) +int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin) { return snd_soc_dapm_set_pin(codec, pin, 1); } @@ -1658,7 +1658,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin); * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ -int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin) +int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin) { return snd_soc_dapm_set_pin(codec, pin, 0); } @@ -1678,7 +1678,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_disable_pin); * NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to * do any widget power switching. */ -int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin) +int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin) { return snd_soc_dapm_set_pin(codec, pin, 0); } @@ -1693,7 +1693,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_nc_pin); * * Returns 1 for connected otherwise 0. */ -int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin) +int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin) { struct snd_soc_dapm_widget *w; -- cgit v1.2.3 From 8a2cd6180f8fa00111843c2f4a4f4361995358e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 7 Jan 2009 17:31:10 +0000 Subject: ASoC: Add jack reporting interface This patch adds a jack reporting interface to ASoC. This wraps the ALSA core jack detection functionality and provides integration with DAPM to automatically update the power state of pins based on the jack state. Since embedded platforms can have multiple detecton methods used for a single jack (eg, separate microphone and headphone detection) the report function allows specification of which bits are being updated on a given report. The expected usage is that machine drivers will create jack objects and then configure jack detection methods to update that jack. Signed-off-by: Mark Brown --- include/sound/soc.h | 32 ++++++++++++ sound/soc/Kconfig | 1 + sound/soc/Makefile | 2 +- sound/soc/soc-jack.c | 138 +++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 172 insertions(+), 1 deletion(-) create mode 100644 sound/soc/soc-jack.c diff --git a/include/sound/soc.h b/include/sound/soc.h index 9b930d342116..9c3ef6a3e9fb 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -154,6 +154,8 @@ enum snd_soc_bias_level { SND_SOC_BIAS_OFF, }; +struct snd_jack; +struct snd_soc_card; struct snd_soc_device; struct snd_soc_pcm_stream; struct snd_soc_ops; @@ -164,6 +166,8 @@ struct snd_soc_platform; struct snd_soc_codec; struct soc_enum; struct snd_soc_ac97_ops; +struct snd_soc_jack; +struct snd_soc_jack_pin; typedef int (*hw_write_t)(void *,const char* ,int); typedef int (*hw_read_t)(void *,char* ,int); @@ -184,6 +188,13 @@ int snd_soc_init_card(struct snd_soc_device *socdev); int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream, const struct snd_pcm_hardware *hw); +/* Jack reporting */ +int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type, + struct snd_soc_jack *jack); +void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask); +int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, + struct snd_soc_jack_pin *pins); + /* codec IO */ #define snd_soc_read(codec, reg) codec->read(codec, reg) #define snd_soc_write(codec, reg, value) codec->write(codec, reg, value) @@ -239,6 +250,27 @@ int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol, int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +/** + * struct snd_soc_jack_pin - Describes a pin to update based on jack detection + * + * @pin: name of the pin to update + * @mask: bits to check for in reported jack status + * @invert: if non-zero then pin is enabled when status is not reported + */ +struct snd_soc_jack_pin { + struct list_head list; + const char *pin; + int mask; + bool invert; +}; + +struct snd_soc_jack { + struct snd_jack *jack; + struct snd_soc_card *card; + struct list_head pins; + int status; +}; + /* SoC PCM stream information */ struct snd_soc_pcm_stream { char *stream_name; diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index ef025c66cc66..3d2bb6fc6dcc 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -6,6 +6,7 @@ menuconfig SND_SOC tristate "ALSA for SoC audio support" select SND_PCM select AC97_BUS if SND_SOC_AC97_BUS + select SND_JACK if INPUT=y || INPUT=SND ---help--- If you want ASoC support, you should say Y here and also to the diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 86a9b1f5b0f3..0237879fd412 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,4 +1,4 @@ -snd-soc-core-objs := soc-core.o soc-dapm.o +snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o obj-$(CONFIG_SND_SOC) += codecs/ diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c new file mode 100644 index 000000000000..8cc00c3cdf34 --- /dev/null +++ b/sound/soc/soc-jack.c @@ -0,0 +1,138 @@ +/* + * soc-jack.c -- ALSA SoC jack handling + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +/** + * snd_soc_jack_new - Create a new jack + * @card: ASoC card + * @id: an identifying string for this jack + * @type: a bitmask of enum snd_jack_type values that can be detected by + * this jack + * @jack: structure to use for the jack + * + * Creates a new jack object. + * + * Returns zero if successful, or a negative error code on failure. + * On success jack will be initialised. + */ +int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type, + struct snd_soc_jack *jack) +{ + jack->card = card; + INIT_LIST_HEAD(&jack->pins); + + return snd_jack_new(card->socdev->codec->card, id, type, &jack->jack); +} +EXPORT_SYMBOL_GPL(snd_soc_jack_new); + +/** + * snd_soc_jack_report - Report the current status for a jack + * + * @jack: the jack + * @status: a bitmask of enum snd_jack_type values that are currently detected. + * @mask: a bitmask of enum snd_jack_type values that being reported. + * + * If configured using snd_soc_jack_add_pins() then the associated + * DAPM pins will be enabled or disabled as appropriate and DAPM + * synchronised. + * + * Note: This function uses mutexes and should be called from a + * context which can sleep (such as a workqueue). + */ +void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) +{ + struct snd_soc_codec *codec = jack->card->socdev->codec; + struct snd_soc_jack_pin *pin; + int enable; + int oldstatus; + + if (!jack) { + WARN_ON_ONCE(!jack); + return; + } + + mutex_lock(&codec->mutex); + + oldstatus = jack->status; + + jack->status &= ~mask; + jack->status |= status; + + /* The DAPM sync is expensive enough to be worth skipping */ + if (jack->status == oldstatus) + goto out; + + list_for_each_entry(pin, &jack->pins, list) { + enable = pin->mask & status; + + if (pin->invert) + enable = !enable; + + if (enable) + snd_soc_dapm_enable_pin(codec, pin->pin); + else + snd_soc_dapm_disable_pin(codec, pin->pin); + } + + snd_soc_dapm_sync(codec); + + snd_jack_report(jack->jack, status); + +out: + mutex_unlock(&codec->mutex); +} +EXPORT_SYMBOL_GPL(snd_soc_jack_report); + +/** + * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack + * + * @jack: ASoC jack + * @count: Number of pins + * @pins: Array of pins + * + * After this function has been called the DAPM pins specified in the + * pins array will have their status updated to reflect the current + * state of the jack whenever the jack status is updated. + */ +int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, + struct snd_soc_jack_pin *pins) +{ + int i; + + for (i = 0; i < count; i++) { + if (!pins[i].pin) { + printk(KERN_ERR "No name for pin %d\n", i); + return -EINVAL; + } + if (!pins[i].mask) { + printk(KERN_ERR "No mask for pin %d (%s)\n", i, + pins[i].pin); + return -EINVAL; + } + + INIT_LIST_HEAD(&pins[i].list); + list_add(&(pins[i].list), &jack->pins); + } + + /* Update to reflect the last reported status; canned jack + * implementations are likely to set their state before the + * card has an opportunity to associate pins. + */ + snd_soc_jack_report(jack, 0, 0); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins); -- cgit v1.2.3 From a6ba2b2dabb583e7820e567fb309d771b50cb9ff Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 8 Jan 2009 15:16:16 +0000 Subject: ASoC: Implement WM8350 headphone jack detection Signed-off-by: Mark Brown --- include/linux/mfd/wm8350/audio.h | 1 + sound/soc/codecs/wm8350.c | 116 +++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8350.h | 8 +++ 3 files changed, 125 insertions(+) diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h index af95a1d2f3a1..d899dc0223ba 100644 --- a/include/linux/mfd/wm8350/audio.h +++ b/include/linux/mfd/wm8350/audio.h @@ -490,6 +490,7 @@ /* * R231 (0xE7) - Jack Status */ +#define WM8350_JACK_L_LVL 0x0800 #define WM8350_JACK_R_LVL 0x0400 /* diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index e3989d406f54..47a9dabb5235 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -51,10 +51,17 @@ struct wm8350_output { u16 mute; }; +struct wm8350_jack_data { + struct snd_soc_jack *jack; + int report; +}; + struct wm8350_data { struct snd_soc_codec codec; struct wm8350_output out1; struct wm8350_output out2; + struct wm8350_jack_data hpl; + struct wm8350_jack_data hpr; struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; }; @@ -1328,6 +1335,95 @@ static int wm8350_resume(struct platform_device *pdev) return 0; } +static void wm8350_hp_jack_handler(struct wm8350 *wm8350, int irq, void *data) +{ + struct wm8350_data *priv = data; + u16 reg; + int report; + int mask; + struct wm8350_jack_data *jack = NULL; + + switch (irq) { + case WM8350_IRQ_CODEC_JCK_DET_L: + jack = &priv->hpl; + mask = WM8350_JACK_L_LVL; + break; + + case WM8350_IRQ_CODEC_JCK_DET_R: + jack = &priv->hpr; + mask = WM8350_JACK_R_LVL; + break; + + default: + BUG(); + } + + if (!jack->jack) { + dev_warn(wm8350->dev, "Jack interrupt called with no jack\n"); + return; + } + + /* Debounce */ + msleep(200); + + reg = wm8350_reg_read(wm8350, WM8350_JACK_PIN_STATUS); + if (reg & mask) + report = jack->report; + else + report = 0; + + snd_soc_jack_report(jack->jack, report, jack->report); +} + +/** + * wm8350_hp_jack_detect - Enable headphone jack detection. + * + * @codec: WM8350 codec + * @which: left or right jack detect signal + * @jack: jack to report detection events on + * @report: value to report + * + * Enables the headphone jack detection of the WM8350. + */ +int wm8350_hp_jack_detect(struct snd_soc_codec *codec, enum wm8350_jack which, + struct snd_soc_jack *jack, int report) +{ + struct wm8350_data *priv = codec->private_data; + struct wm8350 *wm8350 = codec->control_data; + int irq; + int ena; + + switch (which) { + case WM8350_JDL: + priv->hpl.jack = jack; + priv->hpl.report = report; + irq = WM8350_IRQ_CODEC_JCK_DET_L; + ena = WM8350_JDL_ENA; + break; + + case WM8350_JDR: + priv->hpr.jack = jack; + priv->hpr.report = report; + irq = WM8350_IRQ_CODEC_JCK_DET_R; + ena = WM8350_JDR_ENA; + break; + + default: + return -EINVAL; + } + + wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_TOCLK_ENA); + wm8350_set_bits(wm8350, WM8350_JACK_DETECT, ena); + + /* Sync status */ + wm8350_hp_jack_handler(wm8350, irq, priv); + + wm8350_unmask_irq(wm8350, irq); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_hp_jack_detect); + static struct snd_soc_codec *wm8350_codec; static int wm8350_probe(struct platform_device *pdev) @@ -1381,6 +1477,13 @@ static int wm8350_probe(struct platform_device *pdev) wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME, WM8350_OUT2_VU | WM8350_OUT2R_MUTE); + wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); + wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); + wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, + wm8350_hp_jack_handler, priv); + wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, + wm8350_hp_jack_handler, priv); + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { dev_err(&pdev->dev, "failed to create pcms\n"); @@ -1411,8 +1514,21 @@ static int wm8350_remove(struct platform_device *pdev) struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->codec; struct wm8350 *wm8350 = codec->control_data; + struct wm8350_data *priv = codec->private_data; int ret; + wm8350_clear_bits(wm8350, WM8350_JACK_DETECT, + WM8350_JDL_ENA | WM8350_JDR_ENA); + wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_TOCLK_ENA); + + wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); + wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L); + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R); + + priv->hpl.jack = NULL; + priv->hpr.jack = NULL; + /* cancel any work waiting to be queued. */ ret = cancel_delayed_work(&codec->delayed_work); diff --git a/sound/soc/codecs/wm8350.h b/sound/soc/codecs/wm8350.h index cc2887aa6c38..d11bd9288cf9 100644 --- a/sound/soc/codecs/wm8350.h +++ b/sound/soc/codecs/wm8350.h @@ -17,4 +17,12 @@ extern struct snd_soc_dai wm8350_dai; extern struct snd_soc_codec_device soc_codec_dev_wm8350; +enum wm8350_jack { + WM8350_JDL = 1, + WM8350_JDR = 2, +}; + +int wm8350_hp_jack_detect(struct snd_soc_codec *codec, enum wm8350_jack which, + struct snd_soc_jack *jack, int report); + #endif -- cgit v1.2.3 From 3e8e1952e3a3dd59b11233a532ca68e6471742d9 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Fri, 9 Jan 2009 00:23:21 +0000 Subject: ASoC: cleanup duplicated code. Many codec drivers were implementing cookie-cutter copies of the function that adds kcontrols to the codec. This patch moves this code to a common function snd_soc_add_controls() in soc-core.c and updates all drivers using copies of this function to use the new common version. [Edited to raise priority of error log message and document parameters. -- broonie] Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ sound/soc/codecs/ad1980.c | 17 ++------------ sound/soc/codecs/ak4535.c | 18 ++------------- sound/soc/codecs/ssm2602.c | 18 ++------------- sound/soc/codecs/tlv320aic23.c | 21 ++---------------- sound/soc/codecs/tlv320aic3x.c | 19 ++-------------- sound/soc/codecs/twl4030.c | 19 ++-------------- sound/soc/codecs/uda134x.c | 50 ++++++++++++++---------------------------- sound/soc/codecs/uda1380.c | 18 ++------------- sound/soc/codecs/wm8350.c | 18 ++------------- sound/soc/codecs/wm8510.c | 19 ++-------------- sound/soc/codecs/wm8580.c | 17 ++------------ sound/soc/codecs/wm8728.c | 18 ++------------- sound/soc/codecs/wm8731.c | 19 ++-------------- sound/soc/codecs/wm8750.c | 18 ++------------- sound/soc/codecs/wm8753.c | 18 ++------------- sound/soc/codecs/wm8900.c | 19 ++-------------- sound/soc/codecs/wm8903.c | 18 ++------------- sound/soc/codecs/wm8971.c | 18 ++------------- sound/soc/codecs/wm8990.c | 18 ++------------- sound/soc/codecs/wm9712.c | 18 ++------------- sound/soc/codecs/wm9713.c | 18 ++------------- sound/soc/soc-core.c | 31 ++++++++++++++++++++++++++ 23 files changed, 89 insertions(+), 360 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 9c3ef6a3e9fb..9d5a0362a055 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -214,6 +214,8 @@ void snd_soc_free_ac97_codec(struct snd_soc_codec *codec); */ struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template, void *data, char *long_name); +int snd_soc_add_controls(struct snd_soc_codec *codec, + const struct snd_kcontrol_new *controls, int num_controls); int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); int snd_soc_info_enum_ext(struct snd_kcontrol *kcontrol, diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index 73fdbb4d4a3d..c3c5d0eee37a 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -93,20 +93,6 @@ SOC_ENUM("Capture Source", ad1980_cap_src), SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0), }; -/* add non dapm controls */ -static int ad1980_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(ad1980_snd_ac97_controls); i++) { - err = snd_ctl_add(codec->card, snd_soc_cnew( - &ad1980_snd_ac97_controls[i], codec, NULL)); - if (err < 0) - return err; - } - return 0; -} - static unsigned int ac97_read(struct snd_soc_codec *codec, unsigned int reg) { @@ -269,7 +255,8 @@ static int ad1980_soc_probe(struct platform_device *pdev) ext_status = ac97_read(codec, AC97_EXTENDED_STATUS); ac97_write(codec, AC97_EXTENDED_STATUS, ext_status&~0x3800); - ad1980_add_controls(codec); + snd_soc_add_controls(codec, ad1980_snd_ac97_controls, + ARRAY_SIZE(ad1980_snd_ac97_controls)); ret = snd_soc_init_card(socdev); if (ret < 0) { printk(KERN_ERR "ad1980: failed to register card\n"); diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index 81300d8d42ca..f17c363cb1db 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -155,21 +155,6 @@ static const struct snd_kcontrol_new ak4535_snd_controls[] = { SOC_SINGLE("Mic Sidetone Volume", AK4535_VOL, 4, 7, 0), }; -/* add non dapm controls */ -static int ak4535_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(ak4535_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&ak4535_snd_controls[i], codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* Mono 1 Mixer */ static const struct snd_kcontrol_new ak4535_mono1_mixer_controls[] = { SOC_DAPM_SINGLE("Mic Sidetone Switch", AK4535_SIG1, 4, 1, 0), @@ -510,7 +495,8 @@ static int ak4535_init(struct snd_soc_device *socdev) /* power on device */ ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - ak4535_add_controls(codec); + snd_soc_add_controls(codec, ak4535_snd_controls, + ARRAY_SIZE(ak4535_snd_controls)); ak4535_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index cac373616768..ec7fe3b7b0cb 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -151,21 +151,6 @@ SOC_ENUM("Capture Source", ssm2602_enum[0]), SOC_ENUM("Playback De-emphasis", ssm2602_enum[1]), }; -/* add non dapm controls */ -static int ssm2602_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(ssm2602_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&ssm2602_snd_controls[i], codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* Output Mixer */ static const struct snd_kcontrol_new ssm2602_output_mixer_controls[] = { SOC_DAPM_SINGLE("Line Bypass Switch", SSM2602_APANA, 3, 1, 0), @@ -622,7 +607,8 @@ static int ssm2602_init(struct snd_soc_device *socdev) APANA_ENABLE_MIC_BOOST); ssm2602_write(codec, SSM2602_PWR, 0); - ssm2602_add_controls(codec); + snd_soc_add_controls(codec, ssm2602_snd_controls, + ARRAY_SIZE(ssm2602_snd_controls)); ssm2602_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index cfdea007c4cb..a0e47c1dcd64 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -183,24 +183,6 @@ static const struct snd_kcontrol_new tlv320aic23_snd_controls[] = { SOC_ENUM("Playback De-emphasis", tlv320aic23_deemph), }; -/* add non dapm controls */ -static int tlv320aic23_add_controls(struct snd_soc_codec *codec) -{ - - int err, i; - - for (i = 0; i < ARRAY_SIZE(tlv320aic23_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&tlv320aic23_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; - -} - /* PGA Mixer controls for Line and Mic switch */ static const struct snd_kcontrol_new tlv320aic23_output_mixer_controls[] = { SOC_DAPM_SINGLE("Line Bypass Switch", TLV320AIC23_ANLG, 3, 1, 0), @@ -718,7 +700,8 @@ static int tlv320aic23_init(struct snd_soc_device *socdev) tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x1); - tlv320aic23_add_controls(codec); + snd_soc_add_controls(codec, tlv320aic23_snd_controls, + ARRAY_SIZE(tlv320aic23_snd_controls)); tlv320aic23_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index b47a749c5ea2..36ab0198ca3f 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -311,22 +311,6 @@ static const struct snd_kcontrol_new aic3x_snd_controls[] = { SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]), }; -/* add non dapm controls */ -static int aic3x_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(aic3x_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&aic3x_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* Left DAC Mux */ static const struct snd_kcontrol_new aic3x_left_dac_mux_controls = SOC_DAPM_ENUM("Route", aic3x_enum[LDAC_ENUM]); @@ -1224,7 +1208,8 @@ static int aic3x_init(struct snd_soc_device *socdev) aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4); aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4); - aic3x_add_controls(codec); + snd_soc_add_controls(codec, aic3x_snd_controls, + ARRAY_SIZE(aic3x_snd_controls)); aic3x_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index fd0f338374a7..253063fd319a 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -670,22 +670,6 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { 0, 3, 5, 0, input_gain_tlv), }; -/* add non dapm controls */ -static int twl4030_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(twl4030_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&twl4030_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { /* Left channel inputs */ SND_SOC_DAPM_INPUT("MAINMIC"), @@ -1233,7 +1217,8 @@ static int twl4030_init(struct snd_soc_device *socdev) /* power on device */ twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - twl4030_add_controls(codec); + snd_soc_add_controls(codec, twl4030_snd_controls, + ARRAY_SIZE(twl4030_snd_controls)); twl4030_add_widgets(codec); ret = snd_soc_init_card(socdev); diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index a2c5064a774b..277825d155a6 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -431,39 +431,6 @@ SOC_ENUM("PCM Playback De-emphasis", uda134x_mixer_enum[1]), SOC_SINGLE("DC Filter Enable Switch", UDA134X_STATUS0, 0, 1, 0), }; -static int uda134x_add_controls(struct snd_soc_codec *codec) -{ - int err, i, n; - const struct snd_kcontrol_new *ctrls; - struct uda134x_platform_data *pd = codec->control_data; - - switch (pd->model) { - case UDA134X_UDA1340: - case UDA134X_UDA1344: - n = ARRAY_SIZE(uda1340_snd_controls); - ctrls = uda1340_snd_controls; - break; - case UDA134X_UDA1341: - n = ARRAY_SIZE(uda1341_snd_controls); - ctrls = uda1341_snd_controls; - break; - default: - printk(KERN_ERR "%s unkown codec type: %d", - __func__, pd->model); - return -EINVAL; - } - - for (i = 0; i < n; i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&ctrls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - struct snd_soc_dai uda134x_dai = { .name = "UDA134X", /* playback capabilities */ @@ -572,7 +539,22 @@ static int uda134x_soc_probe(struct platform_device *pdev) goto pcm_err; } - ret = uda134x_add_controls(codec); + switch (pd->model) { + case UDA134X_UDA1340: + case UDA134X_UDA1344: + ret = snd_soc_add_controls(codec, uda1340_snd_controls, + ARRAY_SIZE(uda1340_snd_controls)); + break; + case UDA134X_UDA1341: + ret = snd_soc_add_controls(codec, uda1341_snd_controls, + ARRAY_SIZE(uda1341_snd_controls)); + break; + default: + printk(KERN_ERR "%s unkown codec type: %d", + __func__, pd->model); + return -EINVAL; + } + if (ret < 0) { printk(KERN_ERR "UDA134X: failed to register controls\n"); goto pcm_err; diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index e6bf0844fbf3..a957b4365b9d 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -271,21 +271,6 @@ static const struct snd_kcontrol_new uda1380_snd_controls[] = { SOC_SINGLE("AGC Switch", UDA1380_AGC, 0, 1, 0), }; -/* add non dapm controls */ -static int uda1380_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(uda1380_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&uda1380_snd_controls[i], codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* Input mux */ static const struct snd_kcontrol_new uda1380_input_mux_control = SOC_DAPM_ENUM("Route", uda1380_input_sel_enum); @@ -675,7 +660,8 @@ static int uda1380_init(struct snd_soc_device *socdev, int dac_clk) } /* uda1380 init */ - uda1380_add_controls(codec); + snd_soc_add_controls(codec, uda1380_snd_controls, + ARRAY_SIZE(uda1380_snd_controls)); uda1380_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 47a9dabb5235..2e0db29b4998 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -782,21 +782,6 @@ static const struct snd_soc_dapm_route audio_map[] = { {"Beep", NULL, "IN3R PGA"}, }; -static int wm8350_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8350_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8350_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - static int wm8350_add_widgets(struct snd_soc_codec *codec) { int ret; @@ -1490,7 +1475,8 @@ static int wm8350_probe(struct platform_device *pdev) return ret; } - wm8350_add_controls(codec); + snd_soc_add_controls(codec, wm8350_snd_controls, + ARRAY_SIZE(wm8350_snd_controls)); wm8350_add_widgets(codec); wm8350_set_bias_level(codec, SND_SOC_BIAS_STANDBY); diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 40f8238df717..abe7cce87714 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -171,22 +171,6 @@ SOC_SINGLE("Capture Boost(+20dB)", WM8510_ADCBOOST, 8, 1, 0), SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1), }; -/* add non dapm controls */ -static int wm8510_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8510_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8510_snd_controls[i], codec, - NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* Speaker Output Mixer */ static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = { SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0), @@ -656,7 +640,8 @@ static int wm8510_init(struct snd_soc_device *socdev) /* power on device */ codec->bias_level = SND_SOC_BIAS_OFF; wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - wm8510_add_controls(codec); + snd_soc_add_controls(codec, wm8510_snd_controls, + ARRAY_SIZE(wm8510_snd_controls)); wm8510_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index d004e5845298..9b75a377453e 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -330,20 +330,6 @@ SOC_DOUBLE("ADC Mute Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 0), SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0), }; -/* Add non-DAPM controls */ -static int wm8580_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8580_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8580_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - return 0; -} static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = { SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1), SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1), @@ -866,7 +852,8 @@ static int wm8580_init(struct snd_soc_device *socdev) goto pcm_err; } - wm8580_add_controls(codec); + snd_soc_add_controls(codec, wm8580_snd_controls, + ARRAY_SIZE(wm8580_snd_controls)); wm8580_add_widgets(codec); ret = snd_soc_init_card(socdev); diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c index 80b11983e137..defa310bc7d9 100644 --- a/sound/soc/codecs/wm8728.c +++ b/sound/soc/codecs/wm8728.c @@ -92,21 +92,6 @@ SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8728_DACLVOL, WM8728_DACRVOL, SOC_SINGLE("Deemphasis", WM8728_DACCTL, 1, 1, 0), }; -static int wm8728_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8728_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8728_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* * DAPM controls. */ @@ -330,7 +315,8 @@ static int wm8728_init(struct snd_soc_device *socdev) /* power on device */ wm8728_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - wm8728_add_controls(codec); + snd_soc_add_controls(codec, wm8728_snd_controls, + ARRAY_SIZE(wm8728_snd_controls)); wm8728_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index c444b9f2701e..96d6e1aeaf43 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -129,22 +129,6 @@ SOC_SINGLE("Store DC Offset Switch", WM8731_APDIGI, 4, 1, 0), SOC_ENUM("Playback De-emphasis", wm8731_enum[1]), }; -/* add non dapm controls */ -static int wm8731_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8731_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8731_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - /* Output Mixer */ static const struct snd_kcontrol_new wm8731_output_mixer_controls[] = { SOC_DAPM_SINGLE("Line Bypass Switch", WM8731_APANA, 3, 1, 0), @@ -543,7 +527,8 @@ static int wm8731_init(struct snd_soc_device *socdev) reg = wm8731_read_reg_cache(codec, WM8731_RINVOL); wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100); - wm8731_add_controls(codec); + snd_soc_add_controls(codec, wm8731_snd_controls, + ARRAY_SIZE(wm8731_snd_controls)); wm8731_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 5997fa68e0d5..1578569793a2 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -231,21 +231,6 @@ SOC_SINGLE("Mono Playback Volume", WM8750_MOUTV, 0, 127, 0), }; -/* add non dapm controls */ -static int wm8750_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8750_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8750_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - return 0; -} - /* * DAPM Controls */ @@ -816,7 +801,8 @@ static int wm8750_init(struct snd_soc_device *socdev) reg = wm8750_read_reg_cache(codec, WM8750_RINVOL); wm8750_write(codec, WM8750_RINVOL, reg | 0x0100); - wm8750_add_controls(codec); + snd_soc_add_controls(codec, wm8750_snd_controls, + ARRAY_SIZE(wm8750_snd_controls)); wm8750_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 6c21b50c9375..7283178e0eb5 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -339,21 +339,6 @@ SOC_ENUM("ADC Data Select", wm8753_enum[27]), SOC_ENUM("ROUT2 Phase", wm8753_enum[28]), }; -/* add non dapm controls */ -static int wm8753_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8753_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8753_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - return 0; -} - /* * _DAPM_ Controls */ @@ -1603,7 +1588,8 @@ static int wm8753_init(struct snd_soc_device *socdev) reg = wm8753_read_reg_cache(codec, WM8753_RINVOL); wm8753_write(codec, WM8753_RINVOL, reg | 0x0100); - wm8753_add_controls(codec); + snd_soc_add_controls(codec, wm8753_snd_controls, + ARRAY_SIZE(wm8753_snd_controls)); wm8753_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index 6767de10ded0..1e08d4f065f2 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -517,22 +517,6 @@ SOC_SINGLE("LINEOUT2 LP -12dB", WM8900_REG_LOUTMIXCTL1, }; -/* add non dapm controls */ -static int wm8900_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8900_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8900_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - static const struct snd_kcontrol_new wm8900_dapm_loutput2_control = SOC_DAPM_SINGLE("LINEOUT2L Switch", WM8900_REG_POWER3, 6, 1, 0); @@ -1439,7 +1423,8 @@ static int wm8900_probe(struct platform_device *pdev) goto pcm_err; } - wm8900_add_controls(codec); + snd_soc_add_controls(codec, wm8900_snd_controls, + ARRAY_SIZE(wm8900_snd_controls)); wm8900_add_widgets(codec); ret = snd_soc_init_card(socdev); diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index bde74546db4a..6ff34b957dce 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -744,21 +744,6 @@ SOC_DOUBLE_R_TLV("Speaker Volume", 0, 63, 0, out_tlv), }; -static int wm8903_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8903_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8903_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - - return 0; -} - static const struct snd_kcontrol_new linput_mode_mux = SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum); @@ -1737,7 +1722,8 @@ static int wm8903_probe(struct platform_device *pdev) goto err; } - wm8903_add_controls(socdev->codec); + snd_soc_add_controls(socdev->codec, wm8903_snd_controls, + ARRAY_SIZE(wm8903_snd_controls)); wm8903_add_widgets(socdev->codec); ret = snd_soc_init_card(socdev); diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c index 88ead7f8dd98..c8bd9b06f330 100644 --- a/sound/soc/codecs/wm8971.c +++ b/sound/soc/codecs/wm8971.c @@ -195,21 +195,6 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = { SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0), }; -/* add non-DAPM controls */ -static int wm8971_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8971_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8971_snd_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - return 0; -} - /* * DAPM Controls */ @@ -745,7 +730,8 @@ static int wm8971_init(struct snd_soc_device *socdev) reg = wm8971_read_reg_cache(codec, WM8971_RINVOL); wm8971_write(codec, WM8971_RINVOL, reg | 0x0100); - wm8971_add_controls(codec); + snd_soc_add_controls(codec, wm8971_snd_controls, + ARRAY_SIZE(wm8971_snd_controls)); wm8971_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 5b5afc144478..6b2778632d5e 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -417,21 +417,6 @@ SOC_SINGLE("RIN34 Mute Switch", WM8990_RIGHT_LINE_INPUT_3_4_VOLUME, }; -/* add non dapm controls */ -static int wm8990_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm8990_snd_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm8990_snd_controls[i], codec, - NULL)); - if (err < 0) - return err; - } - return 0; -} - /* * _DAPM_ Controls */ @@ -1460,7 +1445,8 @@ static int wm8990_init(struct snd_soc_device *socdev) wm8990_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8)); wm8990_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8)); - wm8990_add_controls(codec); + snd_soc_add_controls(codec, wm8990_snd_controls, + ARRAY_SIZE(wm8990_snd_controls)); wm8990_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index af83d629078a..1b0ace0f4dca 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -154,21 +154,6 @@ SOC_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), SOC_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0), }; -/* add non dapm controls */ -static int wm9712_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm9712_snd_ac97_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm9712_snd_ac97_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - return 0; -} - /* We have to create a fake left and right HP mixers because * the codec only has a single control that is shared by both channels. * This makes it impossible to determine the audio path. @@ -698,7 +683,8 @@ static int wm9712_soc_probe(struct platform_device *pdev) ac97_write(codec, AC97_VIDEO, ac97_read(codec, AC97_VIDEO) | 0x3000); wm9712_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - wm9712_add_controls(codec); + snd_soc_add_controls(codec, wm9712_snd_ac97_controls, + ARRAY_SIZE(wm9712_snd_ac97_controls)); wm9712_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index f3ca8aaf0139..a45622620db7 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -190,21 +190,6 @@ SOC_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0), SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1), }; -/* add non dapm controls */ -static int wm9713_add_controls(struct snd_soc_codec *codec) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(wm9713_snd_ac97_controls); i++) { - err = snd_ctl_add(codec->card, - snd_soc_cnew(&wm9713_snd_ac97_controls[i], - codec, NULL)); - if (err < 0) - return err; - } - return 0; -} - /* We have to create a fake left and right HP mixers because * the codec only has a single control that is shared by both channels. * This makes it impossible to determine the audio path using the current @@ -1245,7 +1230,8 @@ static int wm9713_soc_probe(struct platform_device *pdev) reg = ac97_read(codec, AC97_CD) & 0x7fff; ac97_write(codec, AC97_CD, reg); - wm9713_add_controls(codec); + snd_soc_add_controls(codec, wm9713_snd_ac97_controls, + ARRAY_SIZE(wm9713_snd_ac97_controls)); wm9713_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 6cbe7e82f238..d3b97a7542e0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1494,6 +1494,37 @@ struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template, } EXPORT_SYMBOL_GPL(snd_soc_cnew); +/** + * snd_soc_add_controls - add an array of controls to a codec. + * Convienience function to add a list of controls. Many codecs were + * duplicating this code. + * + * @codec: codec to add controls to + * @controls: array of controls to add + * @num_controls: number of elements in the array + * + * Return 0 for success, else error. + */ +int snd_soc_add_controls(struct snd_soc_codec *codec, + const struct snd_kcontrol_new *controls, int num_controls) +{ + struct snd_card *card = codec->card; + int err, i; + + for (i = 0; i < num_controls; i++) { + const struct snd_kcontrol_new *control = &controls[i]; + err = snd_ctl_add(card, snd_soc_cnew(control, codec, NULL)); + if (err < 0) { + dev_err(codec->dev, "%s: Failed to add %s\n", + codec->name, control->name); + return err; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_add_controls); + /** * snd_soc_info_enum_double - enumerated double mixer info callback * @kcontrol: mixer control -- cgit v1.2.3 From 199f7978730a4bbd88038fd84212b30759579f1a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 9 Jan 2009 23:10:52 +0100 Subject: ALSA: wss-lib: move AD1845 frequency setting into wss-lib This is required to allow the sscape driver to autodetect installed codec. Also, do not create a timer if detected codec has no hardware timer (e.g. AD1848). Signed-off-by: Krzysztof Helt Cc: Rene Herman Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 113 ++++-------------------------------------------- sound/isa/wss/wss_lib.c | 40 +++++++++++++++++ 2 files changed, 48 insertions(+), 105 deletions(-) diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 48a16d865834..bc449166d18d 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -129,9 +129,6 @@ enum GA_REG { #define DMA_8BIT 0x80 -#define AD1845_FREQ_SEL_MSB 0x16 -#define AD1845_FREQ_SEL_LSB 0x17 - enum card_type { SSCAPE, SSCAPE_PNP, @@ -954,82 +951,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l } -/* - * Override for the CS4231 playback format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_playback_format(struct snd_wss *chip, - struct snd_pcm_hw_params *params, - unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the PLAYBACK_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0)); - snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* - * Override for the CS4231 capture format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_capture_format(struct snd_wss *chip, - struct snd_pcm_hw_params *params, - unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the CAPTURE_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0)); - snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - /* * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 * is very much like a CS4231, with a few extra bits. We will @@ -1055,11 +976,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, unsigned long flags; struct snd_pcm *pcm; -#define AD1845_FREQ_SEL_ENABLE 0x08 - -#define AD1845_PWR_DOWN_CTRL 0x1b -#define AD1845_CRYS_CLOCK_SEL 0x1d - /* * It turns out that the PLAYBACK_ENABLE bit is set * by the lowlevel driver ... @@ -1074,7 +990,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, */ if (sscape->type != SSCAPE_VIVO) { - int val; /* * The input clock frequency on the SoundScape must * be 14.31818 MHz, because we must set this register @@ -1082,22 +997,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, */ snd_wss_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20); + snd_wss_out(chip, AD1845_CLOCK, 0x20); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); - /* - * More custom configuration: - * a) select "mode 2" and provide a current drive of 8mA - * b) enable frequency selection (for capture/playback) - */ - spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, CS4231_MISC_INFO, - CS4231_MODE2 | 0x10); - val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL); - snd_wss_out(chip, AD1845_PWR_DOWN_CTRL, - val | AD1845_FREQ_SEL_ENABLE); - spin_unlock_irqrestore(&chip->reg_lock, flags); } err = snd_wss_pcm(chip, 0, &pcm); @@ -1113,11 +1016,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, "for AD1845 chip\n"); goto _error; } - err = snd_wss_timer(chip, 0, NULL); - if (err < 0) { - snd_printk(KERN_ERR "sscape: No timer device " - "for AD1845 chip\n"); - goto _error; + if (chip->hardware != WSS_HW_AD1848) { + err = snd_wss_timer(chip, 0, NULL); + if (err < 0) { + snd_printk(KERN_ERR "sscape: No timer device " + "for AD1845 chip\n"); + goto _error; + } } if (sscape->type != SSCAPE_VIVO) { @@ -1128,8 +1033,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, "MIDI mixer control\n"); goto _error; } - chip->set_playback_format = ad1845_playback_format; - chip->set_capture_format = ad1845_capture_format; } strcpy(card->driver, "SoundScape"); diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 3d6c5f2838af..13299aebd077 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -646,6 +646,24 @@ static void snd_wss_playback_format(struct snd_wss *chip, full_calib = 0; } spin_unlock_irqrestore(&chip->reg_lock, flags); + } else if (chip->hardware == WSS_HW_AD1845) { + unsigned rate = params_rate(params); + + /* + * Program the AD1845 correctly for the playback stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (pdfr & 0xf0)); + snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff); + snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff); + full_calib = 0; + spin_unlock_irqrestore(&chip->reg_lock, flags); } if (full_calib) { snd_wss_mce_up(chip); @@ -690,6 +708,24 @@ static void snd_wss_capture_format(struct snd_wss *chip, full_calib = 0; } spin_unlock_irqrestore(&chip->reg_lock, flags); + } else if (chip->hardware == WSS_HW_AD1845) { + unsigned rate = params_rate(params); + + /* + * Program the AD1845 correctly for the capture stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, CS4231_REC_FORMAT, (cdfr & 0xf0)); + snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff); + snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff); + full_calib = 0; + spin_unlock_irqrestore(&chip->reg_lock, flags); } if (full_calib) { snd_wss_mce_up(chip); @@ -1314,6 +1350,10 @@ static int snd_wss_probe(struct snd_wss *chip) chip->image[CS4231_ALT_FEATURE_2] = chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01; } + /* enable fine grained frequency selection */ + if (chip->hardware == WSS_HW_AD1845) + chip->image[AD1845_PWR_DOWN] = 8; + ptr = (unsigned char *) &chip->image; regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32; snd_wss_mce_down(chip); -- cgit v1.2.3 From 53fb1e63599438bd5f6fbb852023d80916d83983 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:32:08 +0100 Subject: ALSA: Introduce snd_card_create() Introduced snd_card_create() function as a replacement of snd_card_new(). The new function returns a negative error code so that the probe callback can return the proper error code, while snd_card_new() can give only NULL check. The old snd_card_new() is still provided as an inline function but with __deprecated attribute. It'll be removed soon later. Signed-off-by: Takashi Iwai --- include/sound/core.h | 14 +++++++++++++- sound/core/init.c | 47 +++++++++++++++++++++++++++++++---------------- 2 files changed, 44 insertions(+), 17 deletions(-) diff --git a/include/sound/core.h b/include/sound/core.h index f632484bc743..25420c3b5513 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -296,8 +296,20 @@ int snd_card_locked(int card); extern int (*snd_mixer_oss_notify_callback)(struct snd_card *card, int cmd); #endif +int snd_card_create(int idx, const char *id, + struct module *module, int extra_size, + struct snd_card **card_ret); + +static inline __deprecated struct snd_card *snd_card_new(int idx, const char *id, - struct module *module, int extra_size); + struct module *module, int extra_size) +{ + struct snd_card *card; + if (snd_card_create(idx, id, module, extra_size, &card) < 0) + return NULL; + return card; +} + int snd_card_disconnect(struct snd_card *card); int snd_card_free(struct snd_card *card); int snd_card_free_when_closed(struct snd_card *card); diff --git a/sound/core/init.c b/sound/core/init.c index 0d5520c415d3..dc4b80c7f311 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -121,31 +121,44 @@ static inline int init_info_for_card(struct snd_card *card) #endif /** - * snd_card_new - create and initialize a soundcard structure + * snd_card_create - create and initialize a soundcard structure * @idx: card index (address) [0 ... (SNDRV_CARDS-1)] * @xid: card identification (ASCII string) * @module: top level module for locking * @extra_size: allocate this extra size after the main soundcard structure + * @card_ret: the pointer to store the created card instance * * Creates and initializes a soundcard structure. * - * Returns kmallocated snd_card structure. Creates the ALSA control interface - * (which is blocked until snd_card_register function is called). + * The function allocates snd_card instance via kzalloc with the given + * space for the driver to use freely. The allocated struct is stored + * in the given card_ret pointer. + * + * Returns zero if successful or a negative error code. */ -struct snd_card *snd_card_new(int idx, const char *xid, - struct module *module, int extra_size) +int snd_card_create(int idx, const char *xid, + struct module *module, int extra_size, + struct snd_card **card_ret) { struct snd_card *card; int err, idx2; + if (snd_BUG_ON(!card_ret)) + return -EINVAL; + *card_ret = NULL; + if (extra_size < 0) extra_size = 0; card = kzalloc(sizeof(*card) + extra_size, GFP_KERNEL); - if (card == NULL) - return NULL; + if (!card) + return -ENOMEM; if (xid) { - if (!snd_info_check_reserved_words(xid)) + if (!snd_info_check_reserved_words(xid)) { + snd_printk(KERN_ERR + "given id string '%s' is reserved.\n", xid); + err = -EBUSY; goto __error; + } strlcpy(card->id, xid, sizeof(card->id)); } err = 0; @@ -202,26 +215,28 @@ struct snd_card *snd_card_new(int idx, const char *xid, #endif /* the control interface cannot be accessed from the user space until */ /* snd_cards_bitmask and snd_cards are set with snd_card_register */ - if ((err = snd_ctl_create(card)) < 0) { - snd_printd("unable to register control minors\n"); + err = snd_ctl_create(card); + if (err < 0) { + snd_printk(KERN_ERR "unable to register control minors\n"); goto __error; } - if ((err = snd_info_card_create(card)) < 0) { - snd_printd("unable to create card info\n"); + err = snd_info_card_create(card); + if (err < 0) { + snd_printk(KERN_ERR "unable to create card info\n"); goto __error_ctl; } if (extra_size > 0) card->private_data = (char *)card + sizeof(struct snd_card); - return card; + *card_ret = card; + return 0; __error_ctl: snd_device_free_all(card, SNDRV_DEV_CMD_PRE); __error: kfree(card); - return NULL; + return err; } - -EXPORT_SYMBOL(snd_card_new); +EXPORT_SYMBOL(snd_card_create); /* return non-zero if a card is already locked */ int snd_card_locked(int card) -- cgit v1.2.3 From c95eadd2f1afd2ba643e85a8dfc9079a3f03ae47 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:43:35 +0100 Subject: ALSA: Convert to snd_card_create() in sound/isa/* Convert from snd_card_new() to the new snd_card_create() function. Signed-off-by: Takashi Iwai --- sound/isa/ad1816a/ad1816a.c | 7 ++++--- sound/isa/ad1848/ad1848.c | 6 +++--- sound/isa/adlib.c | 6 +++--- sound/isa/als100.c | 7 ++++--- sound/isa/azt2320.c | 7 ++++--- sound/isa/cmi8330.c | 26 ++++++++++++++------------ sound/isa/cs423x/cs4231.c | 6 +++--- sound/isa/cs423x/cs4236.c | 7 ++++--- sound/isa/dt019x.c | 7 ++++--- sound/isa/es1688/es1688.c | 6 +++--- sound/isa/es18xx.c | 7 +++++-- sound/isa/gus/gusclassic.c | 6 +++--- sound/isa/gus/gusextreme.c | 6 +++--- sound/isa/gus/gusmax.c | 8 ++++---- sound/isa/gus/interwave.c | 7 ++++--- sound/isa/opl3sa2.c | 31 +++++++++++++++++-------------- sound/isa/opti9xx/miro.c | 7 ++++--- sound/isa/opti9xx/opti92x-ad1848.c | 6 ++++-- sound/isa/sb/es968.c | 7 ++++--- sound/isa/sb/sb16.c | 9 ++++++--- sound/isa/sb/sb8.c | 8 ++++---- sound/isa/sc6000.c | 6 +++--- sound/isa/sgalaxy.c | 6 +++--- sound/isa/sscape.c | 16 ++++++++-------- sound/isa/wavefront/wavefront.c | 7 ++++--- 25 files changed, 122 insertions(+), 100 deletions(-) diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c index 77524244a846..9660e598232c 100644 --- a/sound/isa/ad1816a/ad1816a.c +++ b/sound/isa/ad1816a/ad1816a.c @@ -157,9 +157,10 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard struct snd_ad1816a *chip; struct snd_opl3 *opl3; - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_ad1816a))) == NULL) - return -ENOMEM; + error = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_ad1816a), &card); + if (error < 0) + return error; acard = (struct snd_card_ad1816a *)card->private_data; if ((error = snd_card_ad1816a_pnp(dev, acard, pcard, pid))) { diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c index 223a6c038819..4beeb6f98e0e 100644 --- a/sound/isa/ad1848/ad1848.c +++ b/sound/isa/ad1848/ad1848.c @@ -91,9 +91,9 @@ static int __devinit snd_ad1848_probe(struct device *dev, unsigned int n) struct snd_pcm *pcm; int error; - card = snd_card_new(index[n], id[n], THIS_MODULE, 0); - if (!card) - return -EINVAL; + error = snd_card_create(index[n], id[n], THIS_MODULE, 0, &card); + if (error < 0) + return error; error = snd_wss_create(card, port[n], -1, irq[n], dma1[n], -1, thinkpad[n] ? WSS_HW_THINKPAD : WSS_HW_DETECT, diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c index 374b7177e111..7465ae036e0b 100644 --- a/sound/isa/adlib.c +++ b/sound/isa/adlib.c @@ -53,10 +53,10 @@ static int __devinit snd_adlib_probe(struct device *dev, unsigned int n) struct snd_opl3 *opl3; int error; - card = snd_card_new(index[n], id[n], THIS_MODULE, 0); - if (!card) { + error = snd_card_create(index[n], id[n], THIS_MODULE, 0, &card); + if (error < 0) { dev_err(dev, "could not create card\n"); - return -EINVAL; + return error; } card->private_data = request_region(port[n], 4, CRD_NAME); diff --git a/sound/isa/als100.c b/sound/isa/als100.c index f1ce30f379c9..5fd52e4d7079 100644 --- a/sound/isa/als100.c +++ b/sound/isa/als100.c @@ -163,9 +163,10 @@ static int __devinit snd_card_als100_probe(int dev, struct snd_card_als100 *acard; struct snd_opl3 *opl3; - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_als100))) == NULL) - return -ENOMEM; + error = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_als100), &card); + if (error < 0) + return error; acard = card->private_data; if ((error = snd_card_als100_pnp(dev, acard, pcard, pid))) { diff --git a/sound/isa/azt2320.c b/sound/isa/azt2320.c index 3e74d1a3928e..f7aa637b0d18 100644 --- a/sound/isa/azt2320.c +++ b/sound/isa/azt2320.c @@ -184,9 +184,10 @@ static int __devinit snd_card_azt2320_probe(int dev, struct snd_wss *chip; struct snd_opl3 *opl3; - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_azt2320))) == NULL) - return -ENOMEM; + error = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_azt2320), &card); + if (error < 0) + return error; acard = (struct snd_card_azt2320 *)card->private_data; if ((error = snd_card_azt2320_pnp(dev, acard, pcard, pid))) { diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index e49aec700a55..24e60902f8ca 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -467,20 +467,22 @@ static int snd_cmi8330_resume(struct snd_card *card) #define PFX "cmi8330: " -static struct snd_card *snd_cmi8330_card_new(int dev) +static int snd_cmi8330_card_new(int dev, struct snd_card **cardp) { struct snd_card *card; struct snd_cmi8330 *acard; + int err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_cmi8330)); - if (card == NULL) { + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_cmi8330), &card); + if (err < 0) { snd_printk(KERN_ERR PFX "could not get a new card\n"); - return NULL; + return err; } acard = card->private_data; acard->card = card; - return card; + *cardp = card; + return 0; } static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) @@ -564,9 +566,9 @@ static int __devinit snd_cmi8330_isa_probe(struct device *pdev, struct snd_card *card; int err; - card = snd_cmi8330_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_cmi8330_card_new(dev, &card); + if (err < 0) + return err; snd_card_set_dev(card, pdev); if ((err = snd_cmi8330_probe(card, dev)) < 0) { snd_card_free(card); @@ -628,9 +630,9 @@ static int __devinit snd_cmi8330_pnp_detect(struct pnp_card_link *pcard, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_cmi8330_card_new(dev); - if (! card) - return -ENOMEM; + res = snd_cmi8330_card_new(dev, &card); + if (res < 0) + return res; if ((res = snd_cmi8330_pnp(dev, card->private_data, pcard, pid)) < 0) { snd_printk(KERN_ERR PFX "PnP detection failed\n"); snd_card_free(card); diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c index f019d449e2d6..cb9153e75b82 100644 --- a/sound/isa/cs423x/cs4231.c +++ b/sound/isa/cs423x/cs4231.c @@ -95,9 +95,9 @@ static int __devinit snd_cs4231_probe(struct device *dev, unsigned int n) struct snd_pcm *pcm; int error; - card = snd_card_new(index[n], id[n], THIS_MODULE, 0); - if (!card) - return -EINVAL; + error = snd_card_create(index[n], id[n], THIS_MODULE, 0, &card); + if (error < 0) + return error; error = snd_wss_create(card, port[n], -1, irq[n], dma1[n], dma2[n], WSS_HW_DETECT, 0, &chip); diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 019c9401663e..db830682804f 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -385,10 +385,11 @@ static void snd_card_cs4236_free(struct snd_card *card) static struct snd_card *snd_cs423x_card_new(int dev) { struct snd_card *card; + int err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_cs4236)); - if (card == NULL) + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_cs4236), &card); + if (err < 0) return NULL; card->private_free = snd_card_cs4236_free; return card; diff --git a/sound/isa/dt019x.c b/sound/isa/dt019x.c index a0242c3b613e..80f5b1af9be8 100644 --- a/sound/isa/dt019x.c +++ b/sound/isa/dt019x.c @@ -150,9 +150,10 @@ static int __devinit snd_card_dt019x_probe(int dev, struct pnp_card_link *pcard, struct snd_card_dt019x *acard; struct snd_opl3 *opl3; - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_dt019x))) == NULL) - return -ENOMEM; + error = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_dt019x), &card); + if (error < 0) + return error; acard = card->private_data; snd_card_set_dev(card, &pcard->card->dev); diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index b46377139cf8..d746750410ea 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -122,9 +122,9 @@ static int __devinit snd_es1688_probe(struct device *dev, unsigned int n) struct snd_pcm *pcm; int error; - card = snd_card_new(index[n], id[n], THIS_MODULE, 0); - if (!card) - return -EINVAL; + error = snd_card_create(index[n], id[n], THIS_MODULE, 0, &card); + if (error < 0) + return error; error = snd_es1688_legacy_create(card, dev, n, &chip); if (error < 0) diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 90498e4ca260..c24c6322fcc9 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -2127,8 +2127,11 @@ static int __devinit snd_audiodrive_pnpc(int dev, struct snd_audiodrive *acard, static struct snd_card *snd_es18xx_card_new(int dev) { - return snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_audiodrive)); + struct snd_card *card; + if (snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_audiodrive), &card) < 0) + return NULL; + return card; } static int __devinit snd_audiodrive_probe(struct snd_card *card, int dev) diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c index 426532a4d730..086b8f0e0f94 100644 --- a/sound/isa/gus/gusclassic.c +++ b/sound/isa/gus/gusclassic.c @@ -148,9 +148,9 @@ static int __devinit snd_gusclassic_probe(struct device *dev, unsigned int n) struct snd_gus_card *gus; int error; - card = snd_card_new(index[n], id[n], THIS_MODULE, 0); - if (!card) - return -EINVAL; + error = snd_card_create(index[n], id[n], THIS_MODULE, 0, &card); + if (error < 0) + return error; if (pcm_channels[n] < 2) pcm_channels[n] = 2; diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index 7ad4c3b41a84..180a8dea6bd9 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -241,9 +241,9 @@ static int __devinit snd_gusextreme_probe(struct device *dev, unsigned int n) struct snd_opl3 *opl3; int error; - card = snd_card_new(index[n], id[n], THIS_MODULE, 0); - if (!card) - return -EINVAL; + error = snd_card_create(index[n], id[n], THIS_MODULE, 0, &card); + if (error < 0) + return error; if (mpu_port[n] == SNDRV_AUTO_PORT) mpu_port[n] = 0; diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c index f94c1976e632..f26eac8d8110 100644 --- a/sound/isa/gus/gusmax.c +++ b/sound/isa/gus/gusmax.c @@ -214,10 +214,10 @@ static int __devinit snd_gusmax_probe(struct device *pdev, unsigned int dev) struct snd_wss *wss; struct snd_gusmax *maxcard; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_gusmax)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_gusmax), &card); + if (err < 0) + return err; card->private_free = snd_gusmax_free; maxcard = (struct snd_gusmax *)card->private_data; maxcard->card = card; diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index 5faecfb602d3..e040c7638911 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -630,10 +630,11 @@ static struct snd_card *snd_interwave_card_new(int dev) { struct snd_card *card; struct snd_interwave *iwcard; + int err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_interwave)); - if (card == NULL) + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_interwave), &card); + if (err < 0) return NULL; iwcard = card->private_data; iwcard->card = card; diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 58c972b2af03..645491a53023 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -617,21 +617,24 @@ static void snd_opl3sa2_free(struct snd_card *card) release_and_free_resource(chip->res_port); } -static struct snd_card *snd_opl3sa2_card_new(int dev) +static int snd_opl3sa2_card_new(int dev, struct snd_card **cardp) { struct snd_card *card; struct snd_opl3sa2 *chip; + int err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct snd_opl3sa2)); - if (card == NULL) - return NULL; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_opl3sa2), &card); + if (err < 0) + return err; strcpy(card->driver, "OPL3SA2"); strcpy(card->shortname, "Yamaha OPL3-SA2"); chip = card->private_data; spin_lock_init(&chip->reg_lock); chip->irq = -1; card->private_free = snd_opl3sa2_free; - return card; + *cardp = card; + return 0; } static int __devinit snd_opl3sa2_probe(struct snd_card *card, int dev) @@ -723,9 +726,9 @@ static int __devinit snd_opl3sa2_pnp_detect(struct pnp_dev *pdev, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_opl3sa2_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_opl3sa2_card_new(dev, &card); + if (err < 0) + return err; if ((err = snd_opl3sa2_pnp(dev, card->private_data, pdev)) < 0) { snd_card_free(card); return err; @@ -789,9 +792,9 @@ static int __devinit snd_opl3sa2_pnp_cdetect(struct pnp_card_link *pcard, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_opl3sa2_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_opl3sa2_card_new(dev, &card); + if (err < 0) + return err; if ((err = snd_opl3sa2_pnp(dev, card->private_data, pdev)) < 0) { snd_card_free(card); return err; @@ -870,9 +873,9 @@ static int __devinit snd_opl3sa2_isa_probe(struct device *pdev, struct snd_card *card; int err; - card = snd_opl3sa2_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_opl3sa2_card_new(dev, &card); + if (err < 0) + return err; snd_card_set_dev(card, pdev); if ((err = snd_opl3sa2_probe(card, dev)) < 0) { snd_card_free(card); diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index 440755cc0013..02e30d7c6a93 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -1228,9 +1228,10 @@ static int __devinit snd_miro_probe(struct device *devptr, unsigned int n) struct snd_pcm *pcm; struct snd_rawmidi *rmidi; - if (!(card = snd_card_new(index, id, THIS_MODULE, - sizeof(struct snd_miro)))) - return -ENOMEM; + error = snd_card_create(index, id, THIS_MODULE, + sizeof(struct snd_miro), &card); + if (error < 0) + return error; card->private_free = snd_card_miro_free; miro = card->private_data; diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 19706b0d8497..5750f38bb797 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -833,9 +833,11 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) static struct snd_card *snd_opti9xx_card_new(void) { struct snd_card *card; + int err; - card = snd_card_new(index, id, THIS_MODULE, sizeof(struct snd_opti9xx)); - if (! card) + err = snd_card_create(index, id, THIS_MODULE, + sizeof(struct snd_opti9xx), &card); + if (err < 0) return NULL; card->private_free = snd_card_opti9xx_free; return card; diff --git a/sound/isa/sb/es968.c b/sound/isa/sb/es968.c index c8c8e214c843..cafc3a7316a8 100644 --- a/sound/isa/sb/es968.c +++ b/sound/isa/sb/es968.c @@ -108,9 +108,10 @@ static int __devinit snd_card_es968_probe(int dev, struct snd_card *card; struct snd_card_es968 *acard; - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_es968))) == NULL) - return -ENOMEM; + error = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_es968), &card); + if (error < 0) + return error; acard = card->private_data; if ((error = snd_card_es968_pnp(dev, acard, pcard, pid))) { snd_card_free(card); diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c index 2c201f78ce50..adf4fdd2c4aa 100644 --- a/sound/isa/sb/sb16.c +++ b/sound/isa/sb/sb16.c @@ -326,9 +326,12 @@ static void snd_sb16_free(struct snd_card *card) static struct snd_card *snd_sb16_card_new(int dev) { - struct snd_card *card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_sb16)); - if (card == NULL) + struct snd_card *card; + int err; + + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_sb16), &card); + if (err < 0) return NULL; card->private_free = snd_sb16_free; return card; diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index ea06877be4b1..3cd57ee54660 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -103,10 +103,10 @@ static int __devinit snd_sb8_probe(struct device *pdev, unsigned int dev) struct snd_opl3 *opl3; int err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_sb8)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_sb8), &card); + if (err < 0) + return err; acard = card->private_data; card->private_free = snd_sb8_free; diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index ca35924dc3b3..7a1470376c6d 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -489,9 +489,9 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) char __iomem *vmss_port; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (!card) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if (xirq == SNDRV_AUTO_IRQ) { xirq = snd_legacy_find_free_irq(possible_irqs); diff --git a/sound/isa/sgalaxy.c b/sound/isa/sgalaxy.c index 2c7503bf1271..6fe27b9d9440 100644 --- a/sound/isa/sgalaxy.c +++ b/sound/isa/sgalaxy.c @@ -243,9 +243,9 @@ static int __devinit snd_sgalaxy_probe(struct device *devptr, unsigned int dev) struct snd_card *card; struct snd_wss *chip; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; xirq = irq[dev]; if (xirq == SNDRV_AUTO_IRQ) { diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 48a16d865834..4025fb558c50 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -1357,10 +1357,10 @@ static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev) struct soundscape *sscape; int ret; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct soundscape)); - if (!card) - return -ENOMEM; + ret = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct soundscape), &card); + if (ret < 0) + return ret; sscape = get_card_soundscape(card); sscape->type = SSCAPE; @@ -1462,10 +1462,10 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, * Create a new ALSA sound card entry, in anticipation * of detecting our hardware ... */ - card = snd_card_new(index[idx], id[idx], THIS_MODULE, - sizeof(struct soundscape)); - if (!card) - return -ENOMEM; + ret = snd_card_create(index[idx], id[idx], THIS_MODULE, + sizeof(struct soundscape), &card); + if (ret < 0) + return ret; sscape = get_card_soundscape(card); diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index 4c095bc7c729..82b8fb746908 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -342,10 +342,11 @@ static struct snd_card *snd_wavefront_card_new(int dev) { struct snd_card *card; snd_wavefront_card_t *acard; + int err; - card = snd_card_new (index[dev], id[dev], THIS_MODULE, - sizeof(snd_wavefront_card_t)); - if (card == NULL) + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(snd_wavefront_card_t), &card); + if (err < 0) return NULL; acard = card->private_data; -- cgit v1.2.3 From e58de7baf7de11f01a675cbbf6ecc8a2758b9ca5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:44:30 +0100 Subject: ALSA: Convert to snd_card_create() in sound/pci/* Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai --- sound/pci/ad1889.c | 6 +++--- sound/pci/ali5451/ali5451.c | 6 +++--- sound/pci/als300.c | 6 +++--- sound/pci/als4000.c | 9 +++++---- sound/pci/atiixp.c | 6 +++--- sound/pci/atiixp_modem.c | 6 +++--- sound/pci/au88x0/au88x0.c | 6 +++--- sound/pci/aw2/aw2-alsa.c | 6 +++--- sound/pci/azt3328.c | 6 +++--- sound/pci/bt87x.c | 6 +++--- sound/pci/ca0106/ca0106_main.c | 6 +++--- sound/pci/cmipci.c | 6 +++--- sound/pci/cs4281.c | 6 +++--- sound/pci/cs46xx/cs46xx.c | 6 +++--- sound/pci/cs5530.c | 6 +++--- sound/pci/cs5535audio/cs5535audio.c | 6 +++--- sound/pci/echoaudio/echoaudio.c | 6 +++--- sound/pci/emu10k1/emu10k1.c | 6 +++--- sound/pci/emu10k1/emu10k1x.c | 6 +++--- sound/pci/ens1370.c | 6 +++--- sound/pci/es1938.c | 6 +++--- sound/pci/es1968.c | 6 +++--- sound/pci/fm801.c | 6 +++--- sound/pci/hda/hda_intel.c | 6 +++--- sound/pci/ice1712/ice1712.c | 6 +++--- sound/pci/ice1712/ice1724.c | 6 +++--- sound/pci/intel8x0.c | 6 +++--- sound/pci/intel8x0m.c | 6 +++--- sound/pci/korg1212/korg1212.c | 6 +++--- sound/pci/maestro3.c | 6 +++--- sound/pci/mixart/mixart.c | 6 +++--- sound/pci/nm256/nm256.c | 6 +++--- sound/pci/oxygen/oxygen_lib.c | 8 ++++---- sound/pci/pcxhr/pcxhr.c | 6 +++--- sound/pci/riptide/riptide.c | 6 +++--- sound/pci/rme32.c | 7 ++++--- sound/pci/rme96.c | 7 ++++--- sound/pci/rme9652/hdsp.c | 6 ++++-- sound/pci/rme9652/hdspm.c | 8 ++++---- sound/pci/rme9652/rme9652.c | 8 ++++---- sound/pci/sis7019.c | 5 ++--- sound/pci/sonicvibes.c | 6 +++--- sound/pci/trident/trident.c | 6 +++--- sound/pci/via82xx.c | 6 +++--- sound/pci/via82xx_modem.c | 6 +++--- sound/pci/vx222/vx222.c | 6 +++--- sound/pci/ymfpci/ymfpci.c | 6 +++--- 47 files changed, 148 insertions(+), 144 deletions(-) diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c index a7f38e63303f..d1f242bd0ac5 100644 --- a/sound/pci/ad1889.c +++ b/sound/pci/ad1889.c @@ -995,10 +995,10 @@ snd_ad1889_probe(struct pci_dev *pci, } /* (2) */ - card = snd_card_new(index[devno], id[devno], THIS_MODULE, 0); + err = snd_card_create(index[devno], id[devno], THIS_MODULE, 0, &card); /* XXX REVISIT: we can probably allocate chip in this call */ - if (card == NULL) - return -ENOMEM; + if (err < 0) + return err; strcpy(card->driver, "AD1889"); strcpy(card->shortname, "Analog Devices AD1889"); diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index 1a0fd65ec280..b36c551da566 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -2307,9 +2307,9 @@ static int __devinit snd_ali_probe(struct pci_dev *pci, snd_ali_printk("probe ...\n"); - card = snd_card_new(index, id, THIS_MODULE, 0); - if (!card) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_ali_create(card, pci, pcm_channels, spdif, &codec); if (err < 0) diff --git a/sound/pci/als300.c b/sound/pci/als300.c index 8df6824b51cd..f557c155db48 100644 --- a/sound/pci/als300.c +++ b/sound/pci/als300.c @@ -812,10 +812,10 @@ static int __devinit snd_als300_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); - if (card == NULL) - return -ENOMEM; + if (err < 0) + return err; chip_type = pci_id->driver_data; diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c index ba570053d4d5..542a0c65a92c 100644 --- a/sound/pci/als4000.c +++ b/sound/pci/als4000.c @@ -889,12 +889,13 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci, pci_write_config_word(pci, PCI_COMMAND, word | PCI_COMMAND_IO); pci_set_master(pci); - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(*acard) /* private_data: acard */); - if (card == NULL) { + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(*acard) /* private_data: acard */, + &card); + if (err < 0) { pci_release_regions(pci); pci_disable_device(pci); - return -ENOMEM; + return err; } acard = card->private_data; diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index 226fe8237d31..9ce8548c03e4 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -1645,9 +1645,9 @@ static int __devinit snd_atiixp_probe(struct pci_dev *pci, struct atiixp *chip; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, spdif_aclink ? "ATIIXP" : "ATIIXP-SPDMA"); strcpy(card->shortname, "ATI IXP"); diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c index 0e6e5cc1c501..c3136cccc559 100644 --- a/sound/pci/atiixp_modem.c +++ b/sound/pci/atiixp_modem.c @@ -1288,9 +1288,9 @@ static int __devinit snd_atiixp_probe(struct pci_dev *pci, struct atiixp_modem *chip; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "ATIIXP-MODEM"); strcpy(card->shortname, "ATI IXP Modem"); diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c index a36d4d1fd419..9ec122383eef 100644 --- a/sound/pci/au88x0/au88x0.c +++ b/sound/pci/au88x0/au88x0.c @@ -250,9 +250,9 @@ snd_vortex_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return -ENOENT; } // (2) - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; // (3) if ((err = snd_vortex_create(card, pci, &chip)) < 0) { diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c index 3f00ddf450f8..eefcbf648ee1 100644 --- a/sound/pci/aw2/aw2-alsa.c +++ b/sound/pci/aw2/aw2-alsa.c @@ -368,9 +368,9 @@ static int __devinit snd_aw2_probe(struct pci_dev *pci, } /* (2) Create card instance */ - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; /* (3) Create main component */ err = snd_aw2_create(card, pci, &chip); diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 333007c523a1..1df96e76c483 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -2216,9 +2216,9 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "AZF3328"); strcpy(card->shortname, "Aztech AZF3328 (PCI168)"); diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 1aa1c0402540..a299340519df 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -888,9 +888,9 @@ static int __devinit snd_bt87x_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (!card) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_bt87x_create(card, pci, &chip); if (err < 0) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 0e62205d4081..b116456e7707 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -1707,9 +1707,9 @@ static int __devinit snd_ca0106_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_ca0106_create(dev, card, pci, &chip); if (err < 0) diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index 1a74ca62c314..c7899c32aba1 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -3272,9 +3272,9 @@ static int __devinit snd_cmipci_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; switch (pci->device) { case PCI_DEVICE_ID_CMEDIA_CM8738: diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c index 192e7842e181..b9b07f464631 100644 --- a/sound/pci/cs4281.c +++ b/sound/pci/cs4281.c @@ -1925,9 +1925,9 @@ static int __devinit snd_cs4281_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_cs4281_create(card, pci, &chip, dual_codec[dev])) < 0) { snd_card_free(card); diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c index e876b3263e46..c9b3e3d48cbc 100644 --- a/sound/pci/cs46xx/cs46xx.c +++ b/sound/pci/cs46xx/cs46xx.c @@ -88,9 +88,9 @@ static int __devinit snd_card_cs46xx_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_cs46xx_create(card, pci, external_amp[dev], thinkpad[dev], &chip)) < 0) { diff --git a/sound/pci/cs5530.c b/sound/pci/cs5530.c index 6dea5b5cc774..dc464321d0f3 100644 --- a/sound/pci/cs5530.c +++ b/sound/pci/cs5530.c @@ -258,10 +258,10 @@ static int __devinit snd_cs5530_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); - if (card == NULL) - return -ENOMEM; + if (err < 0) + return err; err = snd_cs5530_create(card, pci, &chip); if (err < 0) { diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c index 826e6dec2e97..ac1d72e0a1e4 100644 --- a/sound/pci/cs5535audio/cs5535audio.c +++ b/sound/pci/cs5535audio/cs5535audio.c @@ -353,9 +353,9 @@ static int __devinit snd_cs5535audio_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_cs5535audio_create(card, pci, &cs5535au)) < 0) goto probefail_out; diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c index 8dbc5c4ba421..9d015a76eb69 100644 --- a/sound/pci/echoaudio/echoaudio.c +++ b/sound/pci/echoaudio/echoaudio.c @@ -1997,9 +1997,9 @@ static int __devinit snd_echo_probe(struct pci_dev *pci, DE_INIT(("Echoaudio driver starting...\n")); i = 0; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; snd_card_set_dev(card, &pci->dev); diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c index 8354c1a83312..c7f3b994101c 100644 --- a/sound/pci/emu10k1/emu10k1.c +++ b/sound/pci/emu10k1/emu10k1.c @@ -114,9 +114,9 @@ static int __devinit snd_card_emu10k1_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if (max_buffer_size[dev] < 32) max_buffer_size[dev] = 32; else if (max_buffer_size[dev] > 1024) diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index 5ff4dbb62dad..31542adc6b7e 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -1544,9 +1544,9 @@ static int __devinit snd_emu10k1x_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_emu10k1x_create(card, pci, &chip)) < 0) { snd_card_free(card); diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 9bf95367c882..e00614cbceff 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -2409,9 +2409,9 @@ static int __devinit snd_audiopci_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_ensoniq_create(card, pci, &ensoniq)) < 0) { snd_card_free(card); diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c index 4cd9a1faaecc..34a78afc26d0 100644 --- a/sound/pci/es1938.c +++ b/sound/pci/es1938.c @@ -1799,9 +1799,9 @@ static int __devinit snd_es1938_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; for (idx = 0; idx < 5; idx++) { if (pci_resource_start(pci, idx) == 0 || !(pci_resource_flags(pci, idx) & IORESOURCE_IO)) { diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index e9c3794bbcb8..dc97e8116141 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -2645,9 +2645,9 @@ static int __devinit snd_es1968_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (!card) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if (total_bufsize[dev] < 128) total_bufsize[dev] = 128; diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index c129f9e2072c..60cdb9e0b68d 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -1468,9 +1468,9 @@ static int __devinit snd_card_fm801_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_fm801_create(card, pci, tea575x_tuner[dev], &chip)) < 0) { snd_card_free(card); return err; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index f04de115ee11..ad5df2ae6f7d 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2335,10 +2335,10 @@ static int __devinit azx_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (!card) { + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) { snd_printk(KERN_ERR SFX "Error creating card!\n"); - return -ENOMEM; + return err; } err = azx_create(card, pci, dev, pci_id->driver_data, &chip); diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index 58d7cda03de5..bab1c700f497 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -2648,9 +2648,9 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "ICE1712"); strcpy(card->shortname, "ICEnsemble ICE1712"); diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index bb8d8c766b9d..7ff36d3f0f44 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -2456,9 +2456,9 @@ static int __devinit snd_vt1724_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "ICE1724"); strcpy(card->shortname, "ICEnsemble ICE1724"); diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 19d3391e229f..671ff65db029 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -3058,9 +3058,9 @@ static int __devinit snd_intel8x0_probe(struct pci_dev *pci, int err; struct shortname_table *name; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; if (spdif_aclink < 0) spdif_aclink = check_default_spdif_aclink(pci); diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c index 93449e464566..33a843c19316 100644 --- a/sound/pci/intel8x0m.c +++ b/sound/pci/intel8x0m.c @@ -1269,9 +1269,9 @@ static int __devinit snd_intel8x0m_probe(struct pci_dev *pci, int err; struct shortname_table *name; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "ICH-MODEM"); strcpy(card->shortname, "Intel ICH"); diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 5f8006b42750..8b79969034be 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -2443,9 +2443,9 @@ snd_korg1212_probe(struct pci_dev *pci, dev++; return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_korg1212_create(card, pci, &korg1212)) < 0) { snd_card_free(card); diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index 59bbaf8f3e5b..70141548f251 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -2691,9 +2691,9 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; switch (pci->device) { case PCI_DEVICE_ID_ESS_ALLEGRO: diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c index f23a73577c22..bfc19e36c4b6 100644 --- a/sound/pci/mixart/mixart.c +++ b/sound/pci/mixart/mixart.c @@ -1365,12 +1365,12 @@ static int __devinit snd_mixart_probe(struct pci_dev *pci, else idx = index[dev] + i; snprintf(tmpid, sizeof(tmpid), "%s-%d", id[dev] ? id[dev] : "MIXART", i); - card = snd_card_new(idx, tmpid, THIS_MODULE, 0); + err = snd_card_create(idx, tmpid, THIS_MODULE, 0, &card); - if (! card) { + if (err < 0) { snd_printk(KERN_ERR "cannot allocate the card %d\n", i); snd_mixart_free(mgr); - return -ENOMEM; + return err; } strcpy(card->driver, CARD_NAME); diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c index 50c9f8a05082..522a040855d4 100644 --- a/sound/pci/nm256/nm256.c +++ b/sound/pci/nm256/nm256.c @@ -1668,9 +1668,9 @@ static int __devinit snd_nm256_probe(struct pci_dev *pci, } } - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; switch (pci->device) { case PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO: diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 84f481d41efa..9c81e0b05113 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -459,10 +459,10 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, struct oxygen *chip; int err; - card = snd_card_new(index, id, model->owner, - sizeof *chip + model->model_data_size); - if (!card) - return -ENOMEM; + err = snd_card_create(index, id, model->owner, + sizeof(*chip) + model->model_data_size, &card); + if (err < 0) + return err; chip = card->private_data; chip->card = card; diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index 27cf2c28d113..7f95459c8b1f 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -1510,12 +1510,12 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, snprintf(tmpid, sizeof(tmpid), "%s-%d", id[dev] ? id[dev] : card_name, i); - card = snd_card_new(idx, tmpid, THIS_MODULE, 0); + err = snd_card_create(idx, tmpid, THIS_MODULE, 0, &card); - if (! card) { + if (err < 0) { snd_printk(KERN_ERR "cannot allocate the card %d\n", i); pcxhr_free(mgr); - return -ENOMEM; + return err; } strcpy(card->driver, DRIVER_NAME); diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index 3caacfb9d8e0..6f1034417a02 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -2102,9 +2102,9 @@ snd_card_riptide_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_riptide_create(card, pci, &chip)) < 0) { snd_card_free(card); return err; diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c index e7ef3a1a25a8..d7b966e7c4cf 100644 --- a/sound/pci/rme32.c +++ b/sound/pci/rme32.c @@ -1941,9 +1941,10 @@ snd_rme32_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return -ENOENT; } - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct rme32))) == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct rme32), &card); + if (err < 0) + return err; card->private_free = snd_rme32_card_free; rme32 = (struct rme32 *) card->private_data; rme32->card = card; diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c index 3fdd488d0975..55fb1c131f58 100644 --- a/sound/pci/rme96.c +++ b/sound/pci/rme96.c @@ -2348,9 +2348,10 @@ snd_rme96_probe(struct pci_dev *pci, dev++; return -ENOENT; } - if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct rme96))) == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct rme96), &card); + if (err < 0) + return err; card->private_free = snd_rme96_card_free; rme96 = (struct rme96 *)card->private_data; rme96->card = card; diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 44d0c15e2b71..05b3f795a168 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -5158,8 +5158,10 @@ static int __devinit snd_hdsp_probe(struct pci_dev *pci, return -ENOENT; } - if (!(card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct hdsp)))) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct hdsp), &card); + if (err < 0) + return err; hdsp = (struct hdsp *) card->private_data; card->private_free = snd_hdsp_card_free; diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 71231cf1b2b0..d4b4e0d0fee8 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -4503,10 +4503,10 @@ static int __devinit snd_hdspm_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], - THIS_MODULE, sizeof(struct hdspm)); - if (!card) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], + THIS_MODULE, sizeof(struct hdspm), &card); + if (err < 0) + return err; hdspm = card->private_data; card->private_free = snd_hdspm_card_free; diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c index 2570907134d7..bc539abb2105 100644 --- a/sound/pci/rme9652/rme9652.c +++ b/sound/pci/rme9652/rme9652.c @@ -2594,11 +2594,11 @@ static int __devinit snd_rme9652_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_rme9652)); + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_rme9652), &card); - if (!card) - return -ENOMEM; + if (err < 0) + return err; rme9652 = (struct snd_rme9652 *) card->private_data; card->private_free = snd_rme9652_card_free; diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index df2007e3be7c..baf6d8e3dabc 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -1387,9 +1387,8 @@ static int __devinit snd_sis7019_probe(struct pci_dev *pci, if (!enable) goto error_out; - rc = -ENOMEM; - card = snd_card_new(index, id, THIS_MODULE, sizeof(*sis)); - if (!card) + rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card); + if (rc < 0) goto error_out; strcpy(card->driver, "SiS7019"); diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index cd408b86c839..c5601b0ad7cc 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -1423,9 +1423,9 @@ static int __devinit snd_sonic_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; for (idx = 0; idx < 5; idx++) { if (pci_resource_start(pci, idx) == 0 || !(pci_resource_flags(pci, idx) & IORESOURCE_IO)) { diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c index d94b16ffb385..21cef97d478d 100644 --- a/sound/pci/trident/trident.c +++ b/sound/pci/trident/trident.c @@ -89,9 +89,9 @@ static int __devinit snd_trident_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_trident_create(card, pci, pcm_channels[dev], diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 1aafe956ee2b..d8705547dae1 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2433,9 +2433,9 @@ static int __devinit snd_via82xx_probe(struct pci_dev *pci, unsigned int i; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; card_type = pci_id->driver_data; switch (card_type) { diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c index 5bd79d2a5a15..c086b762c150 100644 --- a/sound/pci/via82xx_modem.c +++ b/sound/pci/via82xx_modem.c @@ -1167,9 +1167,9 @@ static int __devinit snd_via82xx_probe(struct pci_dev *pci, unsigned int i; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; card_type = pci_id->driver_data; switch (card_type) { diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c index acc352f4a441..fc9136c3e0d7 100644 --- a/sound/pci/vx222/vx222.c +++ b/sound/pci/vx222/vx222.c @@ -204,9 +204,9 @@ static int __devinit snd_vx222_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; switch ((int)pci_id->driver_data) { case VX_PCI_VX222_OLD: diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 2631a554845e..4af66661f9b0 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -187,9 +187,9 @@ static int __devinit snd_card_ymfpci_probe(struct pci_dev *pci, return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; switch (pci_id->device) { case 0x0004: str = "YMF724"; model = "DS-1"; break; -- cgit v1.2.3 From bd7dd77c2a05c530684eea2e3af16449ae9c5d52 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:45:02 +0100 Subject: ALSA: Convert to snd_card_create() in other sound/* Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: Takashi Iwai --- sound/aoa/core/alsa.c | 7 ++++--- sound/arm/aaci.c | 7 ++++--- sound/arm/pxa2xx-ac97.c | 7 +++---- sound/arm/sa11xx-uda1341.c | 7 ++++--- sound/drivers/dummy.c | 8 ++++---- sound/drivers/ml403-ac97cr.c | 6 +++--- sound/drivers/mpu401/mpu401.c | 6 +++--- sound/drivers/mtpav.c | 6 +++--- sound/drivers/mts64.c | 6 +++--- sound/drivers/pcsp/pcsp.c | 6 +++--- sound/drivers/portman2x4.c | 6 +++--- sound/drivers/serial-u16550.c | 6 +++--- sound/drivers/virmidi.c | 8 ++++---- sound/mips/au1x00.c | 7 ++++--- sound/mips/hal2.c | 6 +++--- sound/mips/sgio2audio.c | 6 +++--- sound/parisc/harmony.c | 6 +++--- sound/pcmcia/pdaudiocf/pdaudiocf.c | 8 ++++---- sound/pcmcia/vx/vxpocket.c | 8 ++++---- sound/ppc/powermac.c | 6 +++--- sound/ppc/snd_ps3.c | 6 ++---- sound/sh/aica.c | 8 ++++---- sound/soc/soc-core.c | 8 ++++---- sound/sparc/amd7930.c | 7 ++++--- sound/sparc/cs4231.c | 9 +++++---- sound/sparc/dbri.c | 8 ++++---- sound/spi/at73c213.c | 7 +++---- sound/usb/caiaq/caiaq-device.c | 7 ++++--- sound/usb/usbaudio.c | 6 +++--- sound/usb/usx2y/us122l.c | 8 +++++--- sound/usb/usx2y/usbusx2y.c | 7 +++++-- 31 files changed, 111 insertions(+), 103 deletions(-) diff --git a/sound/aoa/core/alsa.c b/sound/aoa/core/alsa.c index 617850463582..0fa3855b4790 100644 --- a/sound/aoa/core/alsa.c +++ b/sound/aoa/core/alsa.c @@ -23,9 +23,10 @@ int aoa_alsa_init(char *name, struct module *mod, struct device *dev) /* cannot be EEXIST due to usage in aoa_fabric_register */ return -EBUSY; - alsa_card = snd_card_new(index, name, mod, sizeof(struct aoa_card)); - if (!alsa_card) - return -ENOMEM; + err = snd_card_create(index, name, mod, sizeof(struct aoa_card), + &alsa_card); + if (err < 0) + return err; aoa_card = alsa_card->private_data; aoa_card->alsa_card = alsa_card; alsa_card->dev = dev; diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 89096e811a4b..7d39aac9ec14 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -995,10 +995,11 @@ static struct aaci * __devinit aaci_init_card(struct amba_device *dev) { struct aaci *aaci; struct snd_card *card; + int err; - card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, - THIS_MODULE, sizeof(struct aaci)); - if (card == NULL) + err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, sizeof(struct aaci), &card); + if (err < 0) return NULL; card->private_free = aaci_free_card; diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 85cf591d4e11..7ed100c80a5f 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -173,10 +173,9 @@ static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) struct snd_ac97_template ac97_template; int ret; - ret = -ENOMEM; - card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, - THIS_MODULE, 0); - if (!card) + ret = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, 0, &card); + if (ret < 0) goto err; card->dev = &dev->dev; diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c index 1dcd51d81d10..51d708c31e65 100644 --- a/sound/arm/sa11xx-uda1341.c +++ b/sound/arm/sa11xx-uda1341.c @@ -887,9 +887,10 @@ static int __devinit sa11xx_uda1341_probe(struct platform_device *devptr) struct sa11xx_uda1341 *chip; /* register the soundcard */ - card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct sa11xx_uda1341)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(-1, id, THIS_MODULE, + sizeof(struct sa11xx_uda1341), &card); + if (err < 0) + return err; chip = card->private_data; spin_lock_init(&chip->s[0].dma_lock); diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index 73be7e14a603..54239d2e0997 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -588,10 +588,10 @@ static int __devinit snd_dummy_probe(struct platform_device *devptr) int idx, err; int dev = devptr->id; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_dummy)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_dummy), &card); + if (err < 0) + return err; dummy = card->private_data; dummy->card = card; for (idx = 0; idx < MAX_PCM_DEVICES && idx < pcm_devs[dev]; idx++) { diff --git a/sound/drivers/ml403-ac97cr.c b/sound/drivers/ml403-ac97cr.c index 7783843ca9ae..1950ffce2b54 100644 --- a/sound/drivers/ml403-ac97cr.c +++ b/sound/drivers/ml403-ac97cr.c @@ -1279,9 +1279,9 @@ static int __devinit snd_ml403_ac97cr_probe(struct platform_device *pfdev) if (!enable[dev]) return -ENOENT; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_ml403_ac97cr_create(card, pfdev, &ml403_ac97cr); if (err < 0) { PDEBUG(INIT_FAILURE, "probe(): create failed!\n"); diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c index 5b996f3faba5..149d05a8202d 100644 --- a/sound/drivers/mpu401/mpu401.c +++ b/sound/drivers/mpu401/mpu401.c @@ -73,9 +73,9 @@ static int snd_mpu401_create(int dev, struct snd_card **rcard) snd_printk(KERN_ERR "the uart_enter option is obsolete; remove it\n"); *rcard = NULL; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "MPU-401 UART"); strcpy(card->shortname, card->driver); sprintf(card->longname, "%s at %#lx, ", card->shortname, port[dev]); diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index 5b89c0883d60..c3e9833dcfd9 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -696,9 +696,9 @@ static int __devinit snd_mtpav_probe(struct platform_device *dev) int err; struct mtpav *mtp_card; - card = snd_card_new(index, id, THIS_MODULE, sizeof(*mtp_card)); - if (! card) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, sizeof(*mtp_card), &card); + if (err < 0) + return err; mtp_card = card->private_data; spin_lock_init(&mtp_card->spinlock); diff --git a/sound/drivers/mts64.c b/sound/drivers/mts64.c index 87ba1ddc0115..33d9db782e07 100644 --- a/sound/drivers/mts64.c +++ b/sound/drivers/mts64.c @@ -957,10 +957,10 @@ static int __devinit snd_mts64_probe(struct platform_device *pdev) if ((err = snd_mts64_probe_port(p)) < 0) return err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) { + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) { snd_printd("Cannot create card\n"); - return -ENOMEM; + return err; } strcpy(card->driver, DRIVER_NAME); strcpy(card->shortname, "ESI " CARD_NAME); diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c index a4049eb94d35..aa2ae07a76d5 100644 --- a/sound/drivers/pcsp/pcsp.c +++ b/sound/drivers/pcsp/pcsp.c @@ -98,9 +98,9 @@ static int __devinit snd_card_pcsp_probe(int devnum, struct device *dev) hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); pcsp_chip.timer.function = pcsp_do_timer; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (!card) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_pcsp_create(card); if (err < 0) { diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c index b1c047ec19af..60158e2e0eaf 100644 --- a/sound/drivers/portman2x4.c +++ b/sound/drivers/portman2x4.c @@ -746,10 +746,10 @@ static int __devinit snd_portman_probe(struct platform_device *pdev) if ((err = snd_portman_probe_port(p)) < 0) return err; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) { + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) { snd_printd("Cannot create card\n"); - return -ENOMEM; + return err; } strcpy(card->driver, DRIVER_NAME); strcpy(card->shortname, CARD_NAME); diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index d8aab9da97c2..891d081e4825 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -936,9 +936,9 @@ static int __devinit snd_serial_probe(struct platform_device *devptr) return -ENODEV; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; strcpy(card->driver, "Serial"); strcpy(card->shortname, "Serial MIDI (UART16550A)"); diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c index f79e3614079d..6f48711818f3 100644 --- a/sound/drivers/virmidi.c +++ b/sound/drivers/virmidi.c @@ -90,10 +90,10 @@ static int __devinit snd_virmidi_probe(struct platform_device *devptr) int idx, err; int dev = devptr->id; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_virmidi)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_card_virmidi), &card); + if (err < 0) + return err; vmidi = (struct snd_card_virmidi *)card->private_data; vmidi->card = card; diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c index 1881cec11e78..99e1391b2eb4 100644 --- a/sound/mips/au1x00.c +++ b/sound/mips/au1x00.c @@ -636,9 +636,10 @@ au1000_init(void) struct snd_card *card; struct snd_au1000 *au1000; - card = snd_card_new(-1, "AC97", THIS_MODULE, sizeof(struct snd_au1000)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(-1, "AC97", THIS_MODULE, + sizeof(struct snd_au1000), &card); + if (err < 0) + return err; card->private_free = snd_au1000_free; au1000 = card->private_data; diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c index db495be01861..c52691c2fc46 100644 --- a/sound/mips/hal2.c +++ b/sound/mips/hal2.c @@ -878,9 +878,9 @@ static int __devinit hal2_probe(struct platform_device *pdev) struct snd_hal2 *chip; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; err = hal2_create(card, &chip); if (err < 0) { diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c index 4c63504348dc..66f3b48ceafc 100644 --- a/sound/mips/sgio2audio.c +++ b/sound/mips/sgio2audio.c @@ -936,9 +936,9 @@ static int __devinit snd_sgio2audio_probe(struct platform_device *pdev) struct snd_sgio2audio *chip; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_sgio2audio_create(card, &chip); if (err < 0) { diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index 41f870f8a11d..6055fd6d3b38 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -975,9 +975,9 @@ snd_harmony_probe(struct parisc_device *padev) struct snd_card *card; struct snd_harmony *h; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; err = snd_harmony_create(card, padev, &h); if (err < 0) diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 819aaaac432f..183f6615c68c 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -91,7 +91,7 @@ static int snd_pdacf_dev_free(struct snd_device *device) */ static int snd_pdacf_probe(struct pcmcia_device *link) { - int i; + int i, err; struct snd_pdacf *pdacf; struct snd_card *card; static struct snd_device_ops ops = { @@ -112,10 +112,10 @@ static int snd_pdacf_probe(struct pcmcia_device *link) return -ENODEV; /* disabled explicitly */ /* ok, create a card instance */ - card = snd_card_new(index[i], id[i], THIS_MODULE, 0); - if (card == NULL) { + err = snd_card_create(index[i], id[i], THIS_MODULE, 0, &card); + if (err < 0) { snd_printk(KERN_ERR "pdacf: cannot create a card instance\n"); - return -ENOMEM; + return err; } pdacf = snd_pdacf_create(card); diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 706602a40600..087ded8a8d72 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -292,7 +292,7 @@ static int vxpocket_probe(struct pcmcia_device *p_dev) { struct snd_card *card; struct snd_vxpocket *vxp; - int i; + int i, err; /* find an empty slot from the card list */ for (i = 0; i < SNDRV_CARDS; i++) { @@ -307,10 +307,10 @@ static int vxpocket_probe(struct pcmcia_device *p_dev) return -ENODEV; /* disabled explicitly */ /* ok, create a card instance */ - card = snd_card_new(index[i], id[i], THIS_MODULE, 0); - if (card == NULL) { + err = snd_card_create(index[i], id[i], THIS_MODULE, 0, &card); + if (err < 0) { snd_printk(KERN_ERR "vxpocket: cannot create a card instance\n"); - return -ENOMEM; + return err; } vxp = snd_vxpocket_new(card, ibl[i], p_dev); diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c index c936225771ba..2e18ed0ea899 100644 --- a/sound/ppc/powermac.c +++ b/sound/ppc/powermac.c @@ -58,9 +58,9 @@ static int __init snd_pmac_probe(struct platform_device *devptr) char *name_ext; int err; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) + return err; if ((err = snd_pmac_new(card, &chip)) < 0) goto __error; diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index 8f9e3859c37c..ef2c3f417175 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -969,11 +969,9 @@ static int __init snd_ps3_driver_probe(struct ps3_system_bus_device *dev) } /* create card instance */ - the_card.card = snd_card_new(index, id, THIS_MODULE, 0); - if (!the_card.card) { - ret = -ENXIO; + ret = snd_card_create(index, id, THIS_MODULE, 0, &the_card.card); + if (ret < 0) goto clean_irq; - } strcpy(the_card.card->driver, "PS3"); strcpy(the_card.card->shortname, "PS3"); diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 7c920f3e7fe3..f551233c5a08 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -609,11 +609,11 @@ static int __devinit snd_aica_probe(struct platform_device *devptr) dreamcastcard = kmalloc(sizeof(struct snd_card_aica), GFP_KERNEL); if (unlikely(!dreamcastcard)) return -ENOMEM; - dreamcastcard->card = - snd_card_new(index, SND_AICA_DRIVER, THIS_MODULE, 0); - if (unlikely(!dreamcastcard->card)) { + err = snd_card_create(index, SND_AICA_DRIVER, THIS_MODULE, 0, + &dreamcastcard->card); + if (unlikely(err < 0)) { kfree(dreamcastcard); - return -ENODEV; + return err; } strcpy(dreamcastcard->card->driver, "snd_aica"); strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 6cbe7e82f238..318dfdd54d7f 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1311,17 +1311,17 @@ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid) { struct snd_soc_codec *codec = socdev->codec; struct snd_soc_card *card = socdev->card; - int ret = 0, i; + int ret, i; mutex_lock(&codec->mutex); /* register a sound card */ - codec->card = snd_card_new(idx, xid, codec->owner, 0); - if (!codec->card) { + ret = snd_card_create(idx, xid, codec->owner, 0, &codec->card); + if (ret < 0) { printk(KERN_ERR "asoc: can't create sound card for codec %s\n", codec->name); mutex_unlock(&codec->mutex); - return -ENODEV; + return ret; } codec->card->dev = socdev->dev; diff --git a/sound/sparc/amd7930.c b/sound/sparc/amd7930.c index f87933e48812..ba38912614b4 100644 --- a/sound/sparc/amd7930.c +++ b/sound/sparc/amd7930.c @@ -1018,9 +1018,10 @@ static int __devinit amd7930_sbus_probe(struct of_device *op, const struct of_de return -ENOENT; } - card = snd_card_new(index[dev_num], id[dev_num], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev_num], id[dev_num], THIS_MODULE, 0, + &card); + if (err < 0) + return err; strcpy(card->driver, "AMD7930"); strcpy(card->shortname, "Sun AMD7930"); diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c index 41c387587474..7d93fa705ccf 100644 --- a/sound/sparc/cs4231.c +++ b/sound/sparc/cs4231.c @@ -1563,6 +1563,7 @@ static int __init cs4231_attach_begin(struct snd_card **rcard) { struct snd_card *card; struct snd_cs4231 *chip; + int err; *rcard = NULL; @@ -1574,10 +1575,10 @@ static int __init cs4231_attach_begin(struct snd_card **rcard) return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_cs4231)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_cs4231), &card); + if (err < 0) + return err; strcpy(card->driver, "CS4231"); strcpy(card->shortname, "Sun CS4231"); diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 23ed6f04a718..af95ff1e126c 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -2612,10 +2612,10 @@ static int __devinit dbri_probe(struct of_device *op, const struct of_device_id return -ENODEV; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_dbri)); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_dbri), &card); + if (err < 0) + return err; strcpy(card->driver, "DBRI"); strcpy(card->shortname, "Sun DBRI"); diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 09802e8a6fb8..4c7b051f9d17 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -965,12 +965,11 @@ static int __devinit snd_at73c213_probe(struct spi_device *spi) return PTR_ERR(board->dac_clk); } - retval = -ENOMEM; - /* Allocate "card" using some unused identifiers. */ snprintf(id, sizeof id, "at73c213_%d", board->ssc_id); - card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213)); - if (!card) + retval = snd_card_create(-1, id, THIS_MODULE, + sizeof(struct snd_at73c213), &card); + if (retval < 0) goto out; chip = card->private_data; diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index a62500e387a6..63a2c1d5779b 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -339,6 +339,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) static struct snd_card* create_card(struct usb_device* usb_dev) { int devnum; + int err; struct snd_card *card; struct snd_usb_caiaqdev *dev; @@ -349,9 +350,9 @@ static struct snd_card* create_card(struct usb_device* usb_dev) if (devnum >= SNDRV_CARDS) return NULL; - card = snd_card_new(index[devnum], id[devnum], THIS_MODULE, - sizeof(struct snd_usb_caiaqdev)); - if (!card) + err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, + sizeof(struct snd_usb_caiaqdev), &card); + if (err < 0) return NULL; dev = caiaqdev(card); diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index c709b9563226..eec32e1a3020 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -3463,10 +3463,10 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, return -ENXIO; } - card = snd_card_new(index[idx], id[idx], THIS_MODULE, 0); - if (card == NULL) { + err = snd_card_create(index[idx], id[idx], THIS_MODULE, 0, &card); + if (err < 0) { snd_printk(KERN_ERR "cannot create card instance %d\n", idx); - return -ENOMEM; + return err; } chip = kzalloc(sizeof(*chip), GFP_KERNEL); diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 73e59f4403a4..b21bb475c0ff 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -482,14 +482,16 @@ static struct snd_card *usx2y_create_card(struct usb_device *device) { int dev; struct snd_card *card; + int err; + for (dev = 0; dev < SNDRV_CARDS; ++dev) if (enable[dev] && !snd_us122l_card_used[dev]) break; if (dev >= SNDRV_CARDS) return NULL; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct us122l)); - if (!card) + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct us122l), &card); + if (err < 0) return NULL; snd_us122l_card_used[US122L(card)->chip.index = dev] = 1; diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index 11639bd72a51..b848a1806385 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -337,13 +337,16 @@ static struct snd_card *usX2Y_create_card(struct usb_device *device) { int dev; struct snd_card * card; + int err; + for (dev = 0; dev < SNDRV_CARDS; ++dev) if (enable[dev] && !snd_usX2Y_card_used[dev]) break; if (dev >= SNDRV_CARDS) return NULL; - card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct usX2Ydev)); - if (!card) + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct usX2Ydev), &card); + if (err < 0) return NULL; snd_usX2Y_card_used[usX2Y(card)->chip.index = dev] = 1; card->private_free = snd_usX2Y_card_private_free; -- cgit v1.2.3 From d453379bc5d34d7f55b55931245de5ac1896fd8d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:45:34 +0100 Subject: ALSA: Update description of snd_card_create() in documents Signed-off-by: Takashi Iwai --- .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 44 ++++++++++++---------- 1 file changed, 25 insertions(+), 19 deletions(-) diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 87a7c07ab658..320384c1791b 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -492,9 +492,9 @@ } /* (2) */ - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; /* (3) */ err = snd_mychip_create(card, pci, &chip); @@ -590,8 +590,9 @@ @@ -809,26 +810,28 @@ As mentioned above, to create a card instance, call - snd_card_new(). + snd_card_create(). - The function takes four arguments, the card-index number, the + The function takes five arguments, the card-index number, the id string, the module pointer (usually THIS_MODULE), - and the size of extra-data space. The last argument is used to + the size of extra-data space, and the pointer to return the + card instance. The extra_size argument is used to allocate card->private_data for the chip-specific data. Note that these data - are allocated by snd_card_new(). + are allocated by snd_card_create(). @@ -915,15 +918,16 @@
- 1. Allocating via <function>snd_card_new()</function>. + 1. Allocating via <function>snd_card_create()</function>. As mentioned above, you can pass the extra-data-length - to the 4th argument of snd_card_new(), i.e. + to the 4th argument of snd_card_create(), i.e. @@ -952,8 +956,8 @@ After allocating a card instance via - snd_card_new() (with - NULL on the 4th arg), call + snd_card_create() (with + 0 on the 4th arg), call kzalloc(). @@ -961,7 +965,7 @@ @@ -5750,8 +5754,9 @@ struct _snd_pcm_runtime { .... struct snd_card *card; struct mychip *chip; + int err; .... - card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL); + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); .... chip = kzalloc(sizeof(*chip), GFP_KERNEL); .... @@ -5763,7 +5768,7 @@ struct _snd_pcm_runtime { When you created the chip data with - snd_card_new(), it's anyway accessible + snd_card_create(), it's anyway accessible via private_data field. @@ -5775,9 +5780,10 @@ struct _snd_pcm_runtime { .... struct snd_card *card; struct mychip *chip; + int err; .... - card = snd_card_new(index[dev], id[dev], THIS_MODULE, - sizeof(struct mychip)); + err = snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct mychip), &card); .... chip = card->private_data; .... -- cgit v1.2.3 From 3e7fb9f7ec00fd7cefd0d8e83df0cff86ce12515 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:47:30 +0100 Subject: ALSA: Return proper error code at probe in sound/isa/* Some drivers in sound/isa/* don't handle the error code properly from snd_card_create(). This patch fixes these places. Signed-off-by: Takashi Iwai --- sound/isa/cs423x/cs4236.c | 25 +++++++++++++------------ sound/isa/es18xx.c | 27 ++++++++++++--------------- sound/isa/gus/interwave.c | 19 ++++++++++--------- sound/isa/opti9xx/opti92x-ad1848.c | 20 ++++++++++---------- sound/isa/sb/sb16.c | 19 ++++++++++--------- sound/isa/wavefront/wavefront.c | 19 ++++++++++--------- 6 files changed, 65 insertions(+), 64 deletions(-) diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index db830682804f..f7845986f467 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -382,7 +382,7 @@ static void snd_card_cs4236_free(struct snd_card *card) release_and_free_resource(acard->res_sb_port); } -static struct snd_card *snd_cs423x_card_new(int dev) +static int snd_cs423x_card_new(int dev, struct snd_card **cardp) { struct snd_card *card; int err; @@ -390,9 +390,10 @@ static struct snd_card *snd_cs423x_card_new(int dev) err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(struct snd_card_cs4236), &card); if (err < 0) - return NULL; + return err; card->private_free = snd_card_cs4236_free; - return card; + *cardp = card; + return 0; } static int __devinit snd_cs423x_probe(struct snd_card *card, int dev) @@ -513,9 +514,9 @@ static int __devinit snd_cs423x_isa_probe(struct device *pdev, struct snd_card *card; int err; - card = snd_cs423x_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_cs423x_card_new(dev, &card); + if (err < 0) + return err; snd_card_set_dev(card, pdev); if ((err = snd_cs423x_probe(card, dev)) < 0) { snd_card_free(card); @@ -595,9 +596,9 @@ static int __devinit snd_cs4232_pnpbios_detect(struct pnp_dev *pdev, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_cs423x_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_cs423x_card_new(dev, &card); + if (err < 0) + return err; if ((err = snd_card_cs4232_pnp(dev, card->private_data, pdev)) < 0) { printk(KERN_ERR "PnP BIOS detection failed for " IDENT "\n"); snd_card_free(card); @@ -657,9 +658,9 @@ static int __devinit snd_cs423x_pnpc_detect(struct pnp_card_link *pcard, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_cs423x_card_new(dev); - if (! card) - return -ENOMEM; + res = snd_cs423x_card_new(dev, &card); + if (res < 0) + return res; if ((res = snd_card_cs423x_pnpc(dev, card->private_data, pcard, pid)) < 0) { printk(KERN_ERR "isapnp detection failed and probing for " IDENT " is not supported\n"); diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index c24c6322fcc9..8cfbff73a835 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -2125,13 +2125,10 @@ static int __devinit snd_audiodrive_pnpc(int dev, struct snd_audiodrive *acard, #define is_isapnp_selected(dev) 0 #endif -static struct snd_card *snd_es18xx_card_new(int dev) +static int snd_es18xx_card_new(int dev, struct snd_card **cardp) { - struct snd_card *card; - if (snd_card_create(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_audiodrive), &card) < 0) - return NULL; - return card; + return snd_card_create(index[dev], id[dev], THIS_MODULE, + sizeof(struct snd_audiodrive), cardp); } static int __devinit snd_audiodrive_probe(struct snd_card *card, int dev) @@ -2200,9 +2197,9 @@ static int __devinit snd_es18xx_isa_probe1(int dev, struct device *devptr) struct snd_card *card; int err; - card = snd_es18xx_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_es18xx_card_new(dev, &card); + if (err < 0) + return err; snd_card_set_dev(card, devptr); if ((err = snd_audiodrive_probe(card, dev)) < 0) { snd_card_free(card); @@ -2306,9 +2303,9 @@ static int __devinit snd_audiodrive_pnp_detect(struct pnp_dev *pdev, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_es18xx_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_es18xx_card_new(dev, &card); + if (err < 0) + return err; if ((err = snd_audiodrive_pnp(dev, card->private_data, pdev)) < 0) { snd_card_free(card); return err; @@ -2365,9 +2362,9 @@ static int __devinit snd_audiodrive_pnpc_detect(struct pnp_card_link *pcard, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_es18xx_card_new(dev); - if (! card) - return -ENOMEM; + res = snd_es18xx_card_new(dev, &card); + if (res < 0) + return res; if ((res = snd_audiodrive_pnpc(dev, card->private_data, pcard, pid)) < 0) { snd_card_free(card); diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index e040c7638911..50e429a120da 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -626,7 +626,7 @@ static void snd_interwave_free(struct snd_card *card) free_irq(iwcard->irq, (void *)iwcard); } -static struct snd_card *snd_interwave_card_new(int dev) +static int snd_interwave_card_new(int dev, struct snd_card **cardp) { struct snd_card *card; struct snd_interwave *iwcard; @@ -635,12 +635,13 @@ static struct snd_card *snd_interwave_card_new(int dev) err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(struct snd_interwave), &card); if (err < 0) - return NULL; + return err; iwcard = card->private_data; iwcard->card = card; iwcard->irq = -1; card->private_free = snd_interwave_free; - return card; + *cardp = card; + return 0; } static int __devinit snd_interwave_probe(struct snd_card *card, int dev) @@ -779,9 +780,9 @@ static int __devinit snd_interwave_isa_probe1(int dev, struct device *devptr) struct snd_card *card; int err; - card = snd_interwave_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_interwave_card_new(dev, &card); + if (err < 0) + return err; snd_card_set_dev(card, devptr); if ((err = snd_interwave_probe(card, dev)) < 0) { @@ -877,9 +878,9 @@ static int __devinit snd_interwave_pnp_detect(struct pnp_card_link *pcard, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_interwave_card_new(dev); - if (! card) - return -ENOMEM; + res = snd_interwave_card_new(dev, &card); + if (res < 0) + return res; if ((res = snd_interwave_pnp(dev, card->private_data, pcard, pid)) < 0) { snd_card_free(card); diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5750f38bb797..87a4feb50109 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -830,17 +830,17 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) return snd_card_register(card); } -static struct snd_card *snd_opti9xx_card_new(void) +static int snd_opti9xx_card_new(struct snd_card **cardp) { struct snd_card *card; - int err; err = snd_card_create(index, id, THIS_MODULE, sizeof(struct snd_opti9xx), &card); if (err < 0) - return NULL; + return err; card->private_free = snd_card_opti9xx_free; - return card; + *cardp = card; + return 0; } static int __devinit snd_opti9xx_isa_match(struct device *devptr, @@ -905,9 +905,9 @@ static int __devinit snd_opti9xx_isa_probe(struct device *devptr, } #endif - card = snd_opti9xx_card_new(); - if (! card) - return -ENOMEM; + error = snd_opti9xx_card_new(&card); + if (error < 0) + return error; if ((error = snd_card_opti9xx_detect(card, card->private_data)) < 0) { snd_card_free(card); @@ -952,9 +952,9 @@ static int __devinit snd_opti9xx_pnp_probe(struct pnp_card_link *pcard, return -EBUSY; if (! isapnp) return -ENODEV; - card = snd_opti9xx_card_new(); - if (! card) - return -ENOMEM; + error = snd_opti9xx_card_new(&card); + if (error < 0) + return error; chip = card->private_data; hw = snd_card_opti9xx_pnp(chip, pcard, pid); diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c index adf4fdd2c4aa..519c36346dec 100644 --- a/sound/isa/sb/sb16.c +++ b/sound/isa/sb/sb16.c @@ -324,7 +324,7 @@ static void snd_sb16_free(struct snd_card *card) #define is_isapnp_selected(dev) 0 #endif -static struct snd_card *snd_sb16_card_new(int dev) +static int snd_sb16_card_new(int dev, struct snd_card **cardp) { struct snd_card *card; int err; @@ -332,9 +332,10 @@ static struct snd_card *snd_sb16_card_new(int dev) err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(struct snd_card_sb16), &card); if (err < 0) - return NULL; + return err; card->private_free = snd_sb16_free; - return card; + *cardp = card; + return 0; } static int __devinit snd_sb16_probe(struct snd_card *card, int dev) @@ -492,9 +493,9 @@ static int __devinit snd_sb16_isa_probe1(int dev, struct device *pdev) struct snd_card *card; int err; - card = snd_sb16_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_sb16_card_new(dev, &card); + if (err < 0) + return err; acard = card->private_data; /* non-PnP FM port address is hardwired with base port address */ @@ -613,9 +614,9 @@ static int __devinit snd_sb16_pnp_detect(struct pnp_card_link *pcard, for ( ; dev < SNDRV_CARDS; dev++) { if (!enable[dev] || !isapnp[dev]) continue; - card = snd_sb16_card_new(dev); - if (! card) - return -ENOMEM; + res = snd_sb16_card_new(dev, &card); + if (res < 0) + return res; snd_card_set_dev(card, &pcard->card->dev); if ((res = snd_card_sb16_pnp(dev, card->private_data, pcard, pid)) < 0 || (res = snd_sb16_probe(card, dev)) < 0) { diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index 82b8fb746908..95898b2b7b58 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -338,7 +338,7 @@ snd_wavefront_free(struct snd_card *card) } } -static struct snd_card *snd_wavefront_card_new(int dev) +static int snd_wavefront_card_new(int dev, struct snd_card **cardp) { struct snd_card *card; snd_wavefront_card_t *acard; @@ -347,7 +347,7 @@ static struct snd_card *snd_wavefront_card_new(int dev) err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(snd_wavefront_card_t), &card); if (err < 0) - return NULL; + return err; acard = card->private_data; acard->wavefront.irq = -1; @@ -358,7 +358,8 @@ static struct snd_card *snd_wavefront_card_new(int dev) acard->wavefront.card = card; card->private_free = snd_wavefront_free; - return card; + *cardp = card; + return 0; } static int __devinit @@ -568,9 +569,9 @@ static int __devinit snd_wavefront_isa_probe(struct device *pdev, struct snd_card *card; int err; - card = snd_wavefront_card_new(dev); - if (! card) - return -ENOMEM; + err = snd_wavefront_card_new(dev, &card); + if (err < 0) + return err; snd_card_set_dev(card, pdev); if ((err = snd_wavefront_probe(card, dev)) < 0) { snd_card_free(card); @@ -617,9 +618,9 @@ static int __devinit snd_wavefront_pnp_detect(struct pnp_card_link *pcard, if (dev >= SNDRV_CARDS) return -ENODEV; - card = snd_wavefront_card_new(dev); - if (! card) - return -ENOMEM; + res = snd_wavefront_card_new(dev, &card); + if (res < 0) + return res; if (snd_wavefront_pnp (dev, card->private_data, pcard, pid) < 0) { if (cs4232_pcm_port[dev] == SNDRV_AUTO_PORT) { -- cgit v1.2.3 From 51721f70acaca5aa056b07c5cbe58e62662c068c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:55:08 +0100 Subject: ALSA: Return proper error code at probe in sound/usb/* Some drivers in soudn/usb/* don't handle the error code properly from snd_card_create(). This patch fixes these places. Signed-off-by: Takashi Iwai --- sound/usb/caiaq/caiaq-device.c | 15 +++++++------ sound/usb/usx2y/us122l.c | 51 +++++++++++++++++++++++++----------------- sound/usb/usx2y/usbusx2y.c | 45 +++++++++++++++++++++++-------------- 3 files changed, 67 insertions(+), 44 deletions(-) diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index 63a2c1d5779b..55a9075cb097 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -336,7 +336,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) log("Unable to set up control system (ret=%d)\n", ret); } -static struct snd_card* create_card(struct usb_device* usb_dev) +static int create_card(struct usb_device* usb_dev, struct snd_card **cardp) { int devnum; int err; @@ -348,12 +348,12 @@ static struct snd_card* create_card(struct usb_device* usb_dev) break; if (devnum >= SNDRV_CARDS) - return NULL; + return -ENODEV; err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, sizeof(struct snd_usb_caiaqdev), &card); if (err < 0) - return NULL; + return err; dev = caiaqdev(card); dev->chip.dev = usb_dev; @@ -363,7 +363,8 @@ static struct snd_card* create_card(struct usb_device* usb_dev) spin_lock_init(&dev->spinlock); snd_card_set_dev(card, &usb_dev->dev); - return card; + *cardp = card; + return 0; } static int __devinit init_card(struct snd_usb_caiaqdev *dev) @@ -442,10 +443,10 @@ static int __devinit snd_probe(struct usb_interface *intf, struct snd_card *card; struct usb_device *device = interface_to_usbdev(intf); - card = create_card(device); + ret = create_card(device, &card); - if (!card) - return -ENOMEM; + if (ret < 0) + return ret; usb_set_intfdata(intf, card); ret = init_card(caiaqdev(card)); diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index b21bb475c0ff..98276aafefe6 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -478,7 +478,7 @@ static bool us122l_create_card(struct snd_card *card) return true; } -static struct snd_card *usx2y_create_card(struct usb_device *device) +static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp) { int dev; struct snd_card *card; @@ -488,11 +488,11 @@ static struct snd_card *usx2y_create_card(struct usb_device *device) if (enable[dev] && !snd_us122l_card_used[dev]) break; if (dev >= SNDRV_CARDS) - return NULL; + return -ENODEV; err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(struct us122l), &card); if (err < 0) - return NULL; + return err; snd_us122l_card_used[US122L(card)->chip.index = dev] = 1; US122L(card)->chip.dev = device; @@ -511,46 +511,57 @@ static struct snd_card *usx2y_create_card(struct usb_device *device) US122L(card)->chip.dev->devnum ); snd_card_set_dev(card, &device->dev); - return card; + *cardp = card; + return 0; } -static void *us122l_usb_probe(struct usb_interface *intf, - const struct usb_device_id *device_id) +static int us122l_usb_probe(struct usb_interface *intf, + const struct usb_device_id *device_id, + struct snd_card **cardp) { struct usb_device *device = interface_to_usbdev(intf); - struct snd_card *card = usx2y_create_card(device); + struct snd_card *card; + int err; - if (!card) - return NULL; + err = usx2y_create_card(device, &card); + if (err < 0) + return err; - if (!us122l_create_card(card) || - snd_card_register(card) < 0) { + if (!us122l_create_card(card)) { snd_card_free(card); - return NULL; + return -EINVAL; + } + + err = snd_card_register(card); + if (err < 0) { + snd_card_free(card); + return err; } usb_get_dev(device); - return card; + *cardp = card; + return 0; } static int snd_us122l_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct snd_card *card; + int err; + snd_printdd(KERN_DEBUG"%p:%i\n", intf, intf->cur_altsetting->desc.bInterfaceNumber); if (intf->cur_altsetting->desc.bInterfaceNumber != 1) return 0; - card = us122l_usb_probe(usb_get_intf(intf), id); - - if (card) { - usb_set_intfdata(intf, card); - return 0; + err = us122l_usb_probe(usb_get_intf(intf), id, &card); + if (err < 0) { + usb_put_intf(intf); + return err; } - usb_put_intf(intf); - return -EIO; + usb_set_intfdata(intf, card); + return 0; } static void snd_us122l_disconnect(struct usb_interface *intf) diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index b848a1806385..af8b84954054 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -333,7 +333,7 @@ static struct usb_device_id snd_usX2Y_usb_id_table[] = { { /* terminator */ } }; -static struct snd_card *usX2Y_create_card(struct usb_device *device) +static int usX2Y_create_card(struct usb_device *device, struct snd_card **cardp) { int dev; struct snd_card * card; @@ -343,11 +343,11 @@ static struct snd_card *usX2Y_create_card(struct usb_device *device) if (enable[dev] && !snd_usX2Y_card_used[dev]) break; if (dev >= SNDRV_CARDS) - return NULL; + return -ENODEV; err = snd_card_create(index[dev], id[dev], THIS_MODULE, sizeof(struct usX2Ydev), &card); if (err < 0) - return NULL; + return err; snd_usX2Y_card_used[usX2Y(card)->chip.index = dev] = 1; card->private_free = snd_usX2Y_card_private_free; usX2Y(card)->chip.dev = device; @@ -365,26 +365,36 @@ static struct snd_card *usX2Y_create_card(struct usb_device *device) usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum ); snd_card_set_dev(card, &device->dev); - return card; + *cardp = card; + return 0; } -static void *usX2Y_usb_probe(struct usb_device *device, struct usb_interface *intf, const struct usb_device_id *device_id) +static int usX2Y_usb_probe(struct usb_device *device, + struct usb_interface *intf, + const struct usb_device_id *device_id, + struct snd_card **cardp) { int err; struct snd_card * card; + + *cardp = NULL; if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 || (le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 && le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 && - le16_to_cpu(device->descriptor.idProduct) != USB_ID_US428) || - !(card = usX2Y_create_card(device))) - return NULL; + le16_to_cpu(device->descriptor.idProduct) != USB_ID_US428)) + return -EINVAL; + + err = usX2Y_create_card(device, &card); + if (err < 0) + return err; if ((err = usX2Y_hwdep_new(card, device)) < 0 || (err = snd_card_register(card)) < 0) { snd_card_free(card); - return NULL; + return err; } - return card; + *cardp = card; + return 0; } /* @@ -392,13 +402,14 @@ static void *usX2Y_usb_probe(struct usb_device *device, struct usb_interface *in */ static int snd_usX2Y_probe(struct usb_interface *intf, const struct usb_device_id *id) { - void *chip; - chip = usX2Y_usb_probe(interface_to_usbdev(intf), intf, id); - if (chip) { - usb_set_intfdata(intf, chip); - return 0; - } else - return -EIO; + struct snd_card *card; + int err; + + err = usX2Y_usb_probe(interface_to_usbdev(intf), intf, id, &card); + if (err < 0) + return err; + dev_set_drvdata(&intf->dev, card); + return 0; } static void snd_usX2Y_disconnect(struct usb_interface *intf) -- cgit v1.2.3 From aa3d75d80de464cf23af1d068a5e22f1527b6957 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 16:59:41 +0100 Subject: ALSA: pdaudiocf - Fix missing free in the error path Added the missing snd_card_free() in the error path of probe callback. Signed-off-by: Takashi Iwai --- sound/pcmcia/pdaudiocf/pdaudiocf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 183f6615c68c..ec51569fd50d 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -119,8 +119,10 @@ static int snd_pdacf_probe(struct pcmcia_device *link) } pdacf = snd_pdacf_create(card); - if (! pdacf) + if (!pdacf) { + snd_card_free(card); return -EIO; + } if (snd_device_new(card, SNDRV_DEV_LOWLEVEL, pdacf, &ops) < 0) { kfree(pdacf); -- cgit v1.2.3 From 2fa51107c9aa80ae95b4524198442cdea82d08a3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 28 Dec 2008 17:03:56 +0100 Subject: ALSA: Return proper error code at probe in sound/pcmcia/* Signed-off-by: Takashi Iwai --- sound/pcmcia/pdaudiocf/pdaudiocf.c | 7 ++++--- sound/pcmcia/vx/vxpocket.c | 24 ++++++++++++++---------- 2 files changed, 18 insertions(+), 13 deletions(-) diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index ec51569fd50d..7dea74b71cf1 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -121,13 +121,14 @@ static int snd_pdacf_probe(struct pcmcia_device *link) pdacf = snd_pdacf_create(card); if (!pdacf) { snd_card_free(card); - return -EIO; + return -ENOMEM; } - if (snd_device_new(card, SNDRV_DEV_LOWLEVEL, pdacf, &ops) < 0) { + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, pdacf, &ops); + if (err < 0) { kfree(pdacf); snd_card_free(card); - return -ENODEV; + return err; } snd_card_set_dev(card, &handle_to_dev(link)); diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 087ded8a8d72..7445cc8a47d3 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -130,23 +130,26 @@ static struct snd_vx_hardware vxp440_hw = { /* * create vxpocket instance */ -static struct snd_vxpocket *snd_vxpocket_new(struct snd_card *card, int ibl, - struct pcmcia_device *link) +static int snd_vxpocket_new(struct snd_card *card, int ibl, + struct pcmcia_device *link, + struct snd_vxpocket **chip_ret) { struct vx_core *chip; struct snd_vxpocket *vxp; static struct snd_device_ops ops = { .dev_free = snd_vxpocket_dev_free, }; + int err; chip = snd_vx_create(card, &vxpocket_hw, &snd_vxpocket_ops, sizeof(struct snd_vxpocket) - sizeof(struct vx_core)); - if (! chip) - return NULL; + if (!chip) + return -ENOMEM; - if (snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops) < 0) { + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { kfree(chip); - return NULL; + return err; } chip->ibl.size = ibl; @@ -169,7 +172,8 @@ static struct snd_vxpocket *snd_vxpocket_new(struct snd_card *card, int ibl, link->conf.ConfigIndex = 1; link->conf.Present = PRESENT_OPTION; - return vxp; + *chip_ret = vxp; + return 0; } @@ -313,10 +317,10 @@ static int vxpocket_probe(struct pcmcia_device *p_dev) return err; } - vxp = snd_vxpocket_new(card, ibl[i], p_dev); - if (! vxp) { + err = snd_vxpocket_new(card, ibl[i], p_dev, &vxp); + if (err < 0) { snd_card_free(card); - return -ENODEV; + return err; } card->private_data = vxp; -- cgit v1.2.3 From 758021bfa9ea25c58e62d2f68512628b19502ce7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 12 Jan 2009 15:17:09 +0100 Subject: drivers/media: Convert to snd_card_create() Convert from snd_card_new() to the new snd_card_create() function. Signed-off-by: Takashi Iwai --- drivers/media/video/cx88/cx88-alsa.c | 7 ++++--- drivers/media/video/em28xx/em28xx-audio.c | 7 ++++--- drivers/media/video/saa7134/saa7134-alsa.c | 8 ++++---- 3 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 66c755c116dc..ce98d955231a 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -803,9 +803,10 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci, return (-ENOENT); } - card = snd_card_new(index[devno], id[devno], THIS_MODULE, sizeof(snd_cx88_card_t)); - if (!card) - return (-ENOMEM); + err = snd_card_create(index[devno], id[devno], THIS_MODULE, + sizeof(snd_cx88_card_t), &card); + if (err < 0) + return err; card->private_free = snd_cx88_dev_free; diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 94378ccb7505..66579508e175 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -438,9 +438,10 @@ static int em28xx_audio_init(struct em28xx *dev) printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " "Rechberger\n"); - card = snd_card_new(index[devnr], "Em28xx Audio", THIS_MODULE, 0); - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[devnr], "Em28xx Audio", THIS_MODULE, 0, + &card); + if (err < 0) + return err; spin_lock_init(&adev->slock); err = snd_pcm_new(card, "Em28xx Audio", 0, 0, 1, &pcm); diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 26194a0ce927..482be1436e92 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -990,10 +990,10 @@ static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum) if (!enable[devnum]) return -ENODEV; - card = snd_card_new(index[devnum], id[devnum], THIS_MODULE, sizeof(snd_card_saa7134_t)); - - if (card == NULL) - return -ENOMEM; + err = snd_card_create(index[devnum], id[devnum], THIS_MODULE, + sizeof(snd_card_saa7134_t), &card); + if (err < 0) + return err; strcpy(card->driver, "SAA7134"); -- cgit v1.2.3 From 6ff1871617a3ea1eeaf88b42f652f9a311826bad Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 12 Jan 2009 15:18:28 +0100 Subject: drivers/staging: Convert to snd_card_create() for go7007 Convert from snd_card_new to the new snd_card_create() for go7007. Signed-off-by: Takashi Iwai --- drivers/staging/go7007/snd-go7007.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/go7007/snd-go7007.c b/drivers/staging/go7007/snd-go7007.c index a7de401f61ab..cd19be6c00e0 100644 --- a/drivers/staging/go7007/snd-go7007.c +++ b/drivers/staging/go7007/snd-go7007.c @@ -248,10 +248,11 @@ int go7007_snd_init(struct go7007 *go) spin_lock_init(&gosnd->lock); gosnd->hw_ptr = gosnd->w_idx = gosnd->avail = 0; gosnd->capturing = 0; - gosnd->card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); - if (gosnd->card == NULL) { + ret = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, + &gosnd->card); + if (ret < 0) { kfree(gosnd); - return -ENOMEM; + return ret; } ret = snd_device_new(gosnd->card, SNDRV_DEV_LOWLEVEL, go, &go7007_snd_device_ops); -- cgit v1.2.3 From 183c6e0fb4e39c860960de4abd7541bd260491bb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 12 Jan 2009 15:19:08 +0100 Subject: drivers/usb/gadget: Convert to snd_card_create() Convert from snd_card_new() to the new snd_card_create() function for gmidi. Signed-off-by: Takashi Iwai --- drivers/usb/gadget/gmidi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 60d3f9e9b51f..14e09abbddfc 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -1099,10 +1099,9 @@ static int gmidi_register_card(struct gmidi_device *dev) .dev_free = gmidi_snd_free, }; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (!card) { - ERROR(dev, "snd_card_new failed\n"); - err = -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) { + ERROR(dev, "snd_card_create failed\n"); goto fail; } dev->card = card; -- cgit v1.2.3 From 554b91edec1c588b889a7357ff201c0a450e31ff Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Mon, 12 Jan 2009 21:25:04 +0100 Subject: ALSA: sscape: fix incorrect timeout after microcode upload A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index bc449166d18d..6a7f842b9627 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -393,20 +393,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti */ static int obp_startup_ack(struct soundscape *s, unsigned timeout) { - while (timeout != 0) { + unsigned long end_time = jiffies + msecs_to_jiffies(timeout); + + do { unsigned long flags; unsigned char x; - schedule_timeout_uninterruptible(1); - spin_lock_irqsave(&s->lock, flags); x = inb(HOST_DATA_IO(s->io_base)); spin_unlock_irqrestore(&s->lock, flags); if ((x & 0xfe) == 0xfe) return 1; - --timeout; - } /* while */ + msleep(10); + } while (time_before(jiffies, end_time)); return 0; } @@ -420,20 +420,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout) */ static int host_startup_ack(struct soundscape *s, unsigned timeout) { - while (timeout != 0) { + unsigned long end_time = jiffies + msecs_to_jiffies(timeout); + + do { unsigned long flags; unsigned char x; - schedule_timeout_uninterruptible(1); - spin_lock_irqsave(&s->lock, flags); x = inb(HOST_DATA_IO(s->io_base)); spin_unlock_irqrestore(&s->lock, flags); if (x == 0xfe) return 1; - --timeout; - } /* while */ + msleep(10); + } while (time_before(jiffies, end_time)); return 0; } @@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s, * give it 5 seconds (max) ... */ ret = 0; - if (!obp_startup_ack(s, 5)) { + if (!obp_startup_ack(s, 5000)) { snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n"); ret = -EAGAIN; - } else if (!host_startup_ack(s, 5)) { + } else if (!host_startup_ack(s, 5000)) { snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n"); ret = -EAGAIN; } -- cgit v1.2.3 From dc61b66fc724f89d357c43e2319d2cb7bec1e517 Mon Sep 17 00:00:00 2001 From: Andrea Borgia Date: Mon, 12 Jan 2009 23:17:47 +0100 Subject: ALSA: rename "Device" to "Toshiba SB-0500" via quirks Signed-off-by: Andrea Borgia Signed-off-by: Takashi Iwai --- sound/usb/usbquirks.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 92115755d98e..d59323ecd571 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -39,6 +39,16 @@ .idProduct = prod, \ .bInterfaceClass = USB_CLASS_VENDOR_SPEC +/* Creative/Toshiba Multimedia Center SB-0500 */ +{ + USB_DEVICE(0x041e, 0x3048), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Toshiba", + .product_name = "SB-0500", + .ifnum = QUIRK_NO_INTERFACE + } +}, + /* Creative/E-Mu devices */ { USB_DEVICE(0x041e, 0x3010), -- cgit v1.2.3 From b1a0aac05f044e78a589bfd7a9e2334aa640eb45 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Jan 2009 09:34:06 +0100 Subject: ALSA: opti9xx - Fix build breakage by snd_card_create() conversion Add a missing variable declaration. Signed-off-by: Takashi Iwai --- sound/isa/opti9xx/opti92x-ad1848.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 87a4feb50109..cd6e60a6a4ea 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -833,6 +833,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) static int snd_opti9xx_card_new(struct snd_card **cardp) { struct snd_card *card; + int err; err = snd_card_create(index, id, THIS_MODULE, sizeof(struct snd_opti9xx), &card); -- cgit v1.2.3 From 641b4879444c0edb276fedca5c2fcbd2e5c70044 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 15 Jan 2009 17:05:24 +0100 Subject: ALSA: usb-audio - Cache mixer values Cache mixer values in usb-audio driver to reduce too excessive accesses to the hardware. Signed-off-by: Takashi Iwai --- sound/usb/usbmixer.c | 122 +++++++++++++++++++++++++++++---------------------- 1 file changed, 70 insertions(+), 52 deletions(-) diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 00397c8a765b..c07b3f8485e3 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -110,6 +110,8 @@ struct mixer_build { const struct usbmix_selector_map *selector_map; }; +#define MAX_CHANNELS 10 /* max logical channels */ + struct usb_mixer_elem_info { struct usb_mixer_interface *mixer; struct usb_mixer_elem_info *next_id_elem; /* list of controls with same id */ @@ -120,6 +122,8 @@ struct usb_mixer_elem_info { int channels; int val_type; int min, max, res; + int cached; + int cache_val[MAX_CHANNELS]; u8 initialized; }; @@ -181,8 +185,6 @@ enum { USB_PROC_DCR_RELEASE = 6, }; -#define MAX_CHANNELS 10 /* max logical channels */ - /* * manual mapping of mixer names @@ -376,11 +378,35 @@ static int get_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int * } /* channel = 0: master, 1 = first channel */ -static inline int get_cur_mix_value(struct usb_mixer_elem_info *cval, int channel, int *value) +static inline int get_cur_mix_raw(struct usb_mixer_elem_info *cval, + int channel, int *value) { return get_ctl_value(cval, GET_CUR, (cval->control << 8) | channel, value); } +static int get_cur_mix_value(struct usb_mixer_elem_info *cval, + int channel, int index, int *value) +{ + int err; + + if (cval->cached & (1 << channel)) { + *value = cval->cache_val[index]; + return 0; + } + err = get_cur_mix_raw(cval, channel, value); + if (err < 0) { + if (!cval->mixer->ignore_ctl_error) + snd_printd(KERN_ERR "cannot get current value for " + "control %d ch %d: err = %d\n", + cval->control, channel, err); + return err; + } + cval->cached |= 1 << channel; + cval->cache_val[index] = *value; + return 0; +} + + /* * set a mixer value */ @@ -412,9 +438,17 @@ static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int v return set_ctl_value(cval, SET_CUR, validx, value); } -static inline int set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel, int value) +static int set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel, + int index, int value) { - return set_ctl_value(cval, SET_CUR, (cval->control << 8) | channel, value); + int err; + err = set_ctl_value(cval, SET_CUR, (cval->control << 8) | channel, + value); + if (err < 0) + return err; + cval->cached |= 1 << channel; + cval->cache_val[index] = value; + return 0; } /* @@ -718,7 +752,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) if (cval->min + cval->res < cval->max) { int last_valid_res = cval->res; int saved, test, check; - get_cur_mix_value(cval, minchn, &saved); + get_cur_mix_raw(cval, minchn, &saved); for (;;) { test = saved; if (test < cval->max) @@ -726,8 +760,8 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) else test -= cval->res; if (test < cval->min || test > cval->max || - set_cur_mix_value(cval, minchn, test) || - get_cur_mix_value(cval, minchn, &check)) { + set_cur_mix_value(cval, minchn, 0, test) || + get_cur_mix_raw(cval, minchn, &check)) { cval->res = last_valid_res; break; } @@ -735,7 +769,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) break; cval->res *= 2; } - set_cur_mix_value(cval, minchn, saved); + set_cur_mix_value(cval, minchn, 0, saved); } cval->initialized = 1; @@ -775,35 +809,25 @@ static int mixer_ctl_feature_get(struct snd_kcontrol *kcontrol, struct snd_ctl_e struct usb_mixer_elem_info *cval = kcontrol->private_data; int c, cnt, val, err; + ucontrol->value.integer.value[0] = cval->min; if (cval->cmask) { cnt = 0; for (c = 0; c < MAX_CHANNELS; c++) { - if (cval->cmask & (1 << c)) { - err = get_cur_mix_value(cval, c + 1, &val); - if (err < 0) { - if (cval->mixer->ignore_ctl_error) { - ucontrol->value.integer.value[0] = cval->min; - return 0; - } - snd_printd(KERN_ERR "cannot get current value for control %d ch %d: err = %d\n", cval->control, c + 1, err); - return err; - } - val = get_relative_value(cval, val); - ucontrol->value.integer.value[cnt] = val; - cnt++; - } + if (!(cval->cmask & (1 << c))) + continue; + err = get_cur_mix_value(cval, c + 1, cnt, &val); + if (err < 0) + return cval->mixer->ignore_ctl_error ? 0 : err; + val = get_relative_value(cval, val); + ucontrol->value.integer.value[cnt] = val; + cnt++; } + return 0; } else { /* master channel */ - err = get_cur_mix_value(cval, 0, &val); - if (err < 0) { - if (cval->mixer->ignore_ctl_error) { - ucontrol->value.integer.value[0] = cval->min; - return 0; - } - snd_printd(KERN_ERR "cannot get current value for control %d master ch: err = %d\n", cval->control, err); - return err; - } + err = get_cur_mix_value(cval, 0, 0, &val); + if (err < 0) + return cval->mixer->ignore_ctl_error ? 0 : err; val = get_relative_value(cval, val); ucontrol->value.integer.value[0] = val; } @@ -820,34 +844,28 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e if (cval->cmask) { cnt = 0; for (c = 0; c < MAX_CHANNELS; c++) { - if (cval->cmask & (1 << c)) { - err = get_cur_mix_value(cval, c + 1, &oval); - if (err < 0) { - if (cval->mixer->ignore_ctl_error) - return 0; - return err; - } - val = ucontrol->value.integer.value[cnt]; - val = get_abs_value(cval, val); - if (oval != val) { - set_cur_mix_value(cval, c + 1, val); - changed = 1; - } - get_cur_mix_value(cval, c + 1, &val); - cnt++; + if (!(cval->cmask & (1 << c))) + continue; + err = get_cur_mix_value(cval, c + 1, cnt, &oval); + if (err < 0) + return cval->mixer->ignore_ctl_error ? 0 : err; + val = ucontrol->value.integer.value[cnt]; + val = get_abs_value(cval, val); + if (oval != val) { + set_cur_mix_value(cval, c + 1, cnt, val); + changed = 1; } + cnt++; } } else { /* master channel */ - err = get_cur_mix_value(cval, 0, &oval); - if (err < 0 && cval->mixer->ignore_ctl_error) - return 0; + err = get_cur_mix_value(cval, 0, 0, &oval); if (err < 0) - return err; + return cval->mixer->ignore_ctl_error ? 0 : err; val = ucontrol->value.integer.value[0]; val = get_abs_value(cval, val); if (val != oval) { - set_cur_mix_value(cval, 0, val); + set_cur_mix_value(cval, 0, 0, val); changed = 1; } } -- cgit v1.2.3 From 45e513b689b8b0a01ec2b01cc21816e4780d7ea6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 Jan 2009 18:21:48 +0100 Subject: ALSA: snd-aoa: handle older machines This patch changes snd-aoa to handle some older machines that are currently handled by snd-powermac. snd-aoa has a number of advantages though, notably it can autoload better and is generally a more modern driver. By hardcoding the accepted device-ids (last hunk of the patch) I'm trying to avoid regressions because this driver will otherwise load automatically and not let snd-powermac load. People who are unhappy with snd-powermac and have a device-id property in the device tree are encouraged to read this patch and make a patch to amend this as appropriate. Signed-off-by: Johannes Berg Signed-off-by: Takashi Iwai --- sound/aoa/fabrics/layout.c | 74 +++++++++++++++++++++++++++++++--------- sound/aoa/soundbus/i2sbus/core.c | 22 +++++++++--- 2 files changed, 74 insertions(+), 22 deletions(-) diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index ad60f5d10e82..d9b1d22a62c0 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -1,16 +1,14 @@ /* - * Apple Onboard Audio driver -- layout fabric + * Apple Onboard Audio driver -- layout/machine id fabric * - * Copyright 2006 Johannes Berg + * Copyright 2006-2008 Johannes Berg * * GPL v2, can be found in COPYING. * * - * This fabric module looks for sound codecs - * based on the layout-id property in the device tree. - * + * This fabric module looks for sound codecs based on the + * layout-id or device-id property in the device tree. */ - #include #include #include @@ -63,7 +61,7 @@ struct codec_connect_info { #define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF (1<<0) struct layout { - unsigned int layout_id; + unsigned int layout_id, device_id; struct codec_connect_info codecs[MAX_CODECS_PER_BUS]; int flags; @@ -111,6 +109,10 @@ MODULE_ALIAS("sound-layout-96"); MODULE_ALIAS("sound-layout-98"); MODULE_ALIAS("sound-layout-100"); +MODULE_ALIAS("aoa-device-id-14"); +MODULE_ALIAS("aoa-device-id-22"); +MODULE_ALIAS("aoa-device-id-35"); + /* onyx with all but microphone connected */ static struct codec_connection onyx_connections_nomic[] = { { @@ -518,6 +520,27 @@ static struct layout layouts[] = { .connections = onyx_connections_noheadphones, }, }, + /* PowerMac3,4 */ + { .device_id = 14, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_noline, + }, + }, + /* PowerMac3,6 */ + { .device_id = 22, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, + /* PowerBook5,2 */ + { .device_id = 35, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, {} }; @@ -526,7 +549,7 @@ static struct layout *find_layout_by_id(unsigned int id) struct layout *l; l = layouts; - while (l->layout_id) { + while (l->codecs[0].name) { if (l->layout_id == id) return l; l++; @@ -534,6 +557,19 @@ static struct layout *find_layout_by_id(unsigned int id) return NULL; } +static struct layout *find_layout_by_device(unsigned int id) +{ + struct layout *l; + + l = layouts; + while (l->codecs[0].name) { + if (l->device_id == id) + return l; + l++; + } + return NULL; +} + static void use_layout(struct layout *l) { int i; @@ -938,8 +974,8 @@ static struct aoa_fabric layout_fabric = { static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) { struct device_node *sound = NULL; - const unsigned int *layout_id; - struct layout *layout; + const unsigned int *id; + struct layout *layout = NULL; struct layout_dev *ldev = NULL; int err; @@ -952,15 +988,18 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) if (sound->type && strcasecmp(sound->type, "soundchip") == 0) break; } - if (!sound) return -ENODEV; + if (!sound) + return -ENODEV; - layout_id = of_get_property(sound, "layout-id", NULL); - if (!layout_id) - goto outnodev; - printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d\n", - *layout_id); + id = of_get_property(sound, "layout-id", NULL); + if (id) { + layout = find_layout_by_id(*id); + } else { + id = of_get_property(sound, "device-id", NULL); + if (id) + layout = find_layout_by_device(*id); + } - layout = find_layout_by_id(*layout_id); if (!layout) { printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n"); goto outnodev; @@ -976,6 +1015,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) ldev->layout = layout; ldev->gpio.node = sound->parent; switch (layout->layout_id) { + case 0: /* anything with device_id, not layout_id */ case 41: /* that unknown machine no one seems to have */ case 51: /* PowerBook5,4 */ case 58: /* Mac Mini */ diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index be468edf3ecb..418c84c99d69 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -1,7 +1,7 @@ /* * i2sbus driver * - * Copyright 2006 Johannes Berg + * Copyright 2006-2008 Johannes Berg * * GPL v2, can be found in COPYING. */ @@ -186,13 +186,25 @@ static int i2sbus_add_dev(struct macio_dev *macio, } } if (i == 1) { - const u32 *layout_id = - of_get_property(sound, "layout-id", NULL); - if (layout_id) { - layout = *layout_id; + const u32 *id = of_get_property(sound, "layout-id", NULL); + + if (id) { + layout = *id; snprintf(dev->sound.modalias, 32, "sound-layout-%d", layout); ok = 1; + } else { + id = of_get_property(sound, "device-id", NULL); + /* + * We probably cannot handle all device-id machines, + * so restrict to those we do handle for now. + */ + if (id && (*id == 22 || *id == 14 || *id == 35)) { + snprintf(dev->sound.modalias, 32, + "aoa-device-id-%d", *id); + ok = 1; + layout = -1; + } } } /* for the time being, until we can handle non-layout-id -- cgit v1.2.3 From 5f17e79cdf530b1a6090c65730e5656ac9c19eaa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 Jan 2009 18:22:31 +0100 Subject: ALSA: snd-aoa: handle master-amp if present Some machines have a master amp GPIO that needs to be toggled to get sound output, in addition to speaker/headphone/line-out amps. This makes snd-aoa handle it, if present in the device tree, thus making snd-aoa be able to output sound on PowerMac3,6, which was previously handled by snd-powermac which also doesn't use the master amp GPIO. Signed-off-by: Johannes Berg Signed-off-by: Takashi Iwai --- sound/aoa/aoa-gpio.h | 2 ++ sound/aoa/core/gpio-feature.c | 17 ++++++++++++++++- sound/aoa/fabrics/layout.c | 7 +++++++ 3 files changed, 25 insertions(+), 1 deletion(-) diff --git a/sound/aoa/aoa-gpio.h b/sound/aoa/aoa-gpio.h index ee64f5de8966..6065b0344e23 100644 --- a/sound/aoa/aoa-gpio.h +++ b/sound/aoa/aoa-gpio.h @@ -34,10 +34,12 @@ struct gpio_methods { void (*set_headphone)(struct gpio_runtime *rt, int on); void (*set_speakers)(struct gpio_runtime *rt, int on); void (*set_lineout)(struct gpio_runtime *rt, int on); + void (*set_master)(struct gpio_runtime *rt, int on); int (*get_headphone)(struct gpio_runtime *rt); int (*get_speakers)(struct gpio_runtime *rt); int (*get_lineout)(struct gpio_runtime *rt); + int (*get_master)(struct gpio_runtime *rt); void (*set_hw_reset)(struct gpio_runtime *rt, int on); diff --git a/sound/aoa/core/gpio-feature.c b/sound/aoa/core/gpio-feature.c index c93ad5dec66b..de8e03afa97b 100644 --- a/sound/aoa/core/gpio-feature.c +++ b/sound/aoa/core/gpio-feature.c @@ -14,7 +14,7 @@ #include #include "../aoa.h" -/* TODO: these are 20 global variables +/* TODO: these are lots of global variables * that aren't used on most machines... * Move them into a dynamically allocated * structure and use that. @@ -23,6 +23,7 @@ /* these are the GPIO numbers (register addresses as offsets into * the GPIO space) */ static int headphone_mute_gpio; +static int master_mute_gpio; static int amp_mute_gpio; static int lineout_mute_gpio; static int hw_reset_gpio; @@ -32,6 +33,7 @@ static int linein_detect_gpio; /* see the SWITCH_GPIO macro */ static int headphone_mute_gpio_activestate; +static int master_mute_gpio_activestate; static int amp_mute_gpio_activestate; static int lineout_mute_gpio_activestate; static int hw_reset_gpio_activestate; @@ -156,6 +158,7 @@ static int ftr_gpio_get_##name(struct gpio_runtime *rt) \ FTR_GPIO(headphone, 0); FTR_GPIO(amp, 1); FTR_GPIO(lineout, 2); +FTR_GPIO(master, 3); static void ftr_gpio_set_hw_reset(struct gpio_runtime *rt, int on) { @@ -172,6 +175,8 @@ static void ftr_gpio_set_hw_reset(struct gpio_runtime *rt, int on) hw_reset_gpio, v); } +static struct gpio_methods methods; + static void ftr_gpio_all_amps_off(struct gpio_runtime *rt) { int saved; @@ -181,6 +186,8 @@ static void ftr_gpio_all_amps_off(struct gpio_runtime *rt) ftr_gpio_set_headphone(rt, 0); ftr_gpio_set_amp(rt, 0); ftr_gpio_set_lineout(rt, 0); + if (methods.set_master) + ftr_gpio_set_master(rt, 0); rt->implementation_private = saved; } @@ -193,6 +200,8 @@ static void ftr_gpio_all_amps_restore(struct gpio_runtime *rt) ftr_gpio_set_headphone(rt, (s>>0)&1); ftr_gpio_set_amp(rt, (s>>1)&1); ftr_gpio_set_lineout(rt, (s>>2)&1); + if (methods.set_master) + ftr_gpio_set_master(rt, (s>>3)&1); } static void ftr_handle_notify(struct work_struct *work) @@ -231,6 +240,12 @@ static void ftr_gpio_init(struct gpio_runtime *rt) get_gpio("hw-reset", "audio-hw-reset", &hw_reset_gpio, &hw_reset_gpio_activestate); + if (get_gpio("master-mute", NULL, + &master_mute_gpio, + &master_mute_gpio_activestate)) { + methods.set_master = ftr_gpio_set_master; + methods.get_master = ftr_gpio_get_master; + } headphone_detect_node = get_gpio("headphone-detect", NULL, &headphone_detect_gpio, diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index d9b1d22a62c0..fbf5c933baa4 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -600,6 +600,7 @@ struct layout_dev { struct snd_kcontrol *headphone_ctrl; struct snd_kcontrol *lineout_ctrl; struct snd_kcontrol *speaker_ctrl; + struct snd_kcontrol *master_ctrl; struct snd_kcontrol *headphone_detected_ctrl; struct snd_kcontrol *lineout_detected_ctrl; @@ -651,6 +652,7 @@ static struct snd_kcontrol_new n##_ctl = { \ AMP_CONTROL(headphone, "Headphone Switch"); AMP_CONTROL(speakers, "Speakers Switch"); AMP_CONTROL(lineout, "Line-Out Switch"); +AMP_CONTROL(master, "Master Switch"); static int detect_choice_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -891,6 +893,11 @@ static void layout_attached_codec(struct aoa_codec *codec) lineout = codec->gpio->methods->get_detect(codec->gpio, AOA_NOTIFY_LINE_OUT); + if (codec->gpio->methods->set_master) { + ctl = snd_ctl_new1(&master_ctl, codec->gpio); + ldev->master_ctrl = ctl; + aoa_snd_ctl_add(ctl); + } while (cc->connected) { if (cc->connected & CC_SPEAKERS) { if (headphones <= 0 && lineout <= 0) -- cgit v1.2.3 From ac37373b6463d32955c6ac6b753d5e5b0946a791 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Thu, 15 Jan 2009 15:40:35 -0500 Subject: ASoC: DaVinci: Fix SFFSDR compilation error. Remove dependency on sffsdr_fpga_set_codec_fs() when the SFFSDR FPGA module is not selected. Signed-off-by: Hugo Villeneuve Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-sffsdr.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c index 4935d1bcbd8d..50baef1fe5b4 100644 --- a/sound/soc/davinci/davinci-sffsdr.c +++ b/sound/soc/davinci/davinci-sffsdr.c @@ -25,7 +25,9 @@ #include #include +#ifdef CONFIG_SFFSDR_FPGA #include +#endif #include #include @@ -43,6 +45,17 @@ static int sffsdr_hw_params(struct snd_pcm_substream *substream, int fs; int ret = 0; + /* Fsref can be 32000, 44100 or 48000. */ + fs = params_rate(params); + +#ifndef CONFIG_SFFSDR_FPGA + /* Without the FPGA module, the Fs is fixed at 44100 Hz */ + if (fs != 44100) { + pr_debug("warning: only 44.1 kHz is supported without SFFSDR FPGA module\n"); + return -EINVAL; + } +#endif + /* Set cpu DAI configuration: * CLKX and CLKR are the inputs for the Sample Rate Generator. * FSX and FSR are outputs, driven by the sample Rate Generator. */ @@ -53,12 +66,13 @@ static int sffsdr_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* Fsref can be 32000, 44100 or 48000. */ - fs = params_rate(params); - pr_debug("sffsdr_hw_params: rate = %d Hz\n", fs); +#ifndef CONFIG_SFFSDR_FPGA + return 0; +#else return sffsdr_fpga_set_codec_fs(fs); +#endif } static struct snd_soc_ops sffsdr_ops = { -- cgit v1.2.3 From 8d29b7b9f81d6b83d869ff054e6c189d6da73f1f Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Wed, 14 Jan 2009 09:32:19 +1100 Subject: avr32: Fix out-of-range rcalls in large kernels Replace handcoded rcall instructions with the call pseudo-instruction. For kernels too far over 1MB the rcall instruction can't reach and linking will fail. We already call the final linker with --relax which converts call pseudo-instructions to the right things anyway. This fixes arch/avr32/kernel/built-in.o: In function `syscall_exit_work': (.ex.text+0x198): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o arch/avr32/kernel/built-in.o: In function `fault_exit_work': (.ex.text+0x3b6): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o But I'm still left with arch/avr32/kernel/built-in.o:(.fixup+0x2): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+45a arch/avr32/kernel/built-in.o:(.fixup+0x8): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+8ea arch/avr32/kernel/built-in.o:(.fixup+0xe): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+abe arch/avr32/kernel/built-in.o:(.fixup+0x14): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ac8 arch/avr32/kernel/built-in.o:(.fixup+0x1a): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ad2 arch/avr32/kernel/built-in.o:(.fixup+0x20): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+adc arch/avr32/kernel/built-in.o:(.fixup+0x26): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ae6 arch/avr32/kernel/built-in.o:(.fixup+0x2c): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+af0 arch/avr32/kernel/built-in.o:(.fixup+0x32): additional relocation overflows omitted from the output These are caused by a similar problem with 'rjmp' instructions. Unfortunately, there's no easy fix for these at the moment since we don't have a arbitrary-range 'jmp' instruction similar to 'call'. Signed-off-by: Ben Nizette Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/entry-avr32b.S | 60 +++++++++++++++++++-------------------- arch/avr32/kernel/syscall-stubs.S | 14 ++++----- arch/avr32/lib/strnlen_user.S | 2 +- 3 files changed, 38 insertions(+), 38 deletions(-) diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 33d49377b8be..009a80155d67 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -150,10 +150,10 @@ page_not_present: tlbmiss_restore sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_page_fault + call do_page_fault rjmp ret_from_exception .align 2 @@ -250,7 +250,7 @@ syscall_badsys: .global ret_from_fork ret_from_fork: - rcall schedule_tail + call schedule_tail /* check for syscall tracing */ get_thread_info r0 @@ -261,7 +261,7 @@ ret_from_fork: syscall_trace_enter: pushm r8-r12 - rcall syscall_trace + call syscall_trace popm r8-r12 rjmp syscall_trace_cont @@ -269,14 +269,14 @@ syscall_exit_work: bld r1, TIF_SYSCALL_TRACE brcc 1f unmask_interrupts - rcall syscall_trace + call syscall_trace mask_interrupts ld.w r1, r0[TI_flags] 1: bld r1, TIF_NEED_RESCHED brcc 2f unmask_interrupts - rcall schedule + call schedule mask_interrupts ld.w r1, r0[TI_flags] rjmp 1b @@ -287,7 +287,7 @@ syscall_exit_work: unmask_interrupts mov r12, sp mov r11, r0 - rcall do_notify_resume + call do_notify_resume mask_interrupts ld.w r1, r0[TI_flags] rjmp 1b @@ -394,7 +394,7 @@ handle_critical: mfsr r12, SYSREG_ECR mov r11, sp - rcall do_critical_exception + call do_critical_exception /* We should never get here... */ bad_return: @@ -407,18 +407,18 @@ bad_return: do_bus_error_write: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mov r11, 1 rjmp 1f do_bus_error_read: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mov r11, 0 1: mfsr r12, SYSREG_BEAR mov r10, sp - rcall do_bus_error + call do_bus_error rjmp ret_from_exception .align 1 @@ -433,7 +433,7 @@ do_nmi_ll: 1: pushm r8, r9 /* PC and SR */ mfsr r12, SYSREG_ECR mov r11, sp - rcall do_nmi + call do_nmi popm r8-r9 mtsr SYSREG_RAR_NMI, r8 tst r0, r0 @@ -457,29 +457,29 @@ do_nmi_ll: handle_address_fault: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_address_exception + call do_address_exception rjmp ret_from_exception handle_protection_fault: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_page_fault + call do_page_fault rjmp ret_from_exception .align 1 do_illegal_opcode_ll: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_illegal_opcode + call do_illegal_opcode rjmp ret_from_exception do_dtlb_modified: @@ -513,11 +513,11 @@ do_dtlb_modified: do_fpe_ll: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex unmask_interrupts mov r12, 26 mov r11, sp - rcall do_fpe + call do_fpe rjmp ret_from_exception ret_from_exception: @@ -553,7 +553,7 @@ fault_resume_kernel: lddsp r4, sp[REG_SR] bld r4, SYSREG_GM_OFFSET brcs 1f - rcall preempt_schedule_irq + call preempt_schedule_irq 1: #endif @@ -582,7 +582,7 @@ fault_exit_work: bld r1, TIF_NEED_RESCHED brcc 1f unmask_interrupts - rcall schedule + call schedule mask_interrupts ld.w r1, r0[TI_flags] rjmp fault_exit_work @@ -593,7 +593,7 @@ fault_exit_work: unmask_interrupts mov r12, sp mov r11, r0 - rcall do_notify_resume + call do_notify_resume mask_interrupts ld.w r1, r0[TI_flags] rjmp fault_exit_work @@ -616,10 +616,10 @@ handle_debug: .Ldebug_fixup_cont: #ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_off + call trace_hardirqs_off #endif mov r12, sp - rcall do_debug + call do_debug mov sp, r12 lddsp r2, sp[REG_SR] @@ -643,7 +643,7 @@ handle_debug: mtsr SYSREG_RSR_DBG, r11 mtsr SYSREG_RAR_DBG, r10 #ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_on + call trace_hardirqs_on 1: #endif ldmts sp++, r0-lr @@ -676,7 +676,7 @@ debug_resume_kernel: #ifdef CONFIG_TRACE_IRQFLAGS bld r11, SYSREG_GM_OFFSET brcc 1f - rcall trace_hardirqs_on + call trace_hardirqs_on 1: #endif mfsr r2, SYSREG_SR @@ -747,7 +747,7 @@ irq_level\level: mov r11, sp mov r12, \level - rcall do_IRQ + call do_IRQ lddsp r4, sp[REG_SR] bfextu r4, r4, SYSREG_M0_OFFSET, 3 @@ -767,7 +767,7 @@ irq_level\level: 1: #ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_on + call trace_hardirqs_on #endif popm r8-r9 mtsr rar_int\level, r8 @@ -807,7 +807,7 @@ irq_level\level: lddsp r4, sp[REG_SR] bld r4, SYSREG_GM_OFFSET brcs 1b - rcall preempt_schedule_irq + call preempt_schedule_irq #endif rjmp 1b .endm diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index 673178e235f3..f7244cd02fbb 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -61,7 +61,7 @@ __sys_execve: __sys_mmap2: pushm lr st.w --sp, ARG6 - rcall sys_mmap2 + call sys_mmap2 sub sp, -4 popm pc @@ -70,7 +70,7 @@ __sys_mmap2: __sys_sendto: pushm lr st.w --sp, ARG6 - rcall sys_sendto + call sys_sendto sub sp, -4 popm pc @@ -79,7 +79,7 @@ __sys_sendto: __sys_recvfrom: pushm lr st.w --sp, ARG6 - rcall sys_recvfrom + call sys_recvfrom sub sp, -4 popm pc @@ -88,7 +88,7 @@ __sys_recvfrom: __sys_pselect6: pushm lr st.w --sp, ARG6 - rcall sys_pselect6 + call sys_pselect6 sub sp, -4 popm pc @@ -97,7 +97,7 @@ __sys_pselect6: __sys_splice: pushm lr st.w --sp, ARG6 - rcall sys_splice + call sys_splice sub sp, -4 popm pc @@ -106,7 +106,7 @@ __sys_splice: __sys_epoll_pwait: pushm lr st.w --sp, ARG6 - rcall sys_epoll_pwait + call sys_epoll_pwait sub sp, -4 popm pc @@ -115,6 +115,6 @@ __sys_epoll_pwait: __sys_sync_file_range: pushm lr st.w --sp, ARG6 - rcall sys_sync_file_range + call sys_sync_file_range sub sp, -4 popm pc diff --git a/arch/avr32/lib/strnlen_user.S b/arch/avr32/lib/strnlen_user.S index 65ce11afa66a..e46f4724962b 100644 --- a/arch/avr32/lib/strnlen_user.S +++ b/arch/avr32/lib/strnlen_user.S @@ -48,7 +48,7 @@ adjust_length: lddpc lr, _task_size sub r11, lr, r12 mov r9, r11 - rcall __strnlen_user + call __strnlen_user cp.w r12, r9 brgt 1f popm pc -- cgit v1.2.3 From 61f3632fdcdcf547f6487f56b45976d7964756c4 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 14 Jan 2009 13:32:53 +0100 Subject: avr32: fix out-of-range rjmp instruction on large kernels Use .subsection to place fixups closer to their jump targets. This increases the maximum size of the kernel before we get link errors significantly. The problem here is that we don't have a "call"-ish pseudo-instruction to use instead of rjmp...we could add one, but that means we'll have to wait for a new toolchain release, wait until we're fairly sure most people are using it, etc... As an added bonus, it should decrease the RAM footprint slightly, though it might pollute the icache a bit more. Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/uaccess.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h index ed092395215e..245b2ee213c9 100644 --- a/arch/avr32/include/asm/uaccess.h +++ b/arch/avr32/include/asm/uaccess.h @@ -230,10 +230,10 @@ extern int __put_user_bad(void); asm volatile( \ "1: ld." suffix " %1, %3 \n" \ "2: \n" \ - " .section .fixup, \"ax\" \n" \ + " .subsection 1 \n" \ "3: mov %0, %4 \n" \ " rjmp 2b \n" \ - " .previous \n" \ + " .subsection 0 \n" \ " .section __ex_table, \"a\" \n" \ " .long 1b, 3b \n" \ " .previous \n" \ @@ -295,10 +295,10 @@ extern int __put_user_bad(void); asm volatile( \ "1: st." suffix " %1, %3 \n" \ "2: \n" \ - " .section .fixup, \"ax\" \n" \ + " .subsection 1 \n" \ "3: mov %0, %4 \n" \ " rjmp 2b \n" \ - " .previous \n" \ + " .subsection 0 \n" \ " .section __ex_table, \"a\" \n" \ " .long 1b, 3b \n" \ " .previous \n" \ -- cgit v1.2.3 From 2165592b837e086f2b94835a2d81e6f3199c1319 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 16 Jan 2009 11:03:19 +0100 Subject: ALSA: snd-usb-caiaq: support for two more audio devices - Added support for two new audio devices from Native Instuments, 'Audio4DJ' and 'GuitarRig mobile' - Add missing statement about 'Session IO' in Kconfig help text - Version number bumped to 1.3.11 Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/Kconfig | 3 +++ sound/usb/caiaq/caiaq-audio.c | 5 +++-- sound/usb/caiaq/caiaq-control.c | 15 ++++++++++++--- sound/usb/caiaq/caiaq-device.c | 16 ++++++++++++++-- sound/usb/caiaq/caiaq-device.h | 2 ++ 5 files changed, 34 insertions(+), 7 deletions(-) diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index 4f0eac9bff1e..523aec188ccf 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -48,7 +48,10 @@ config SND_USB_CAIAQ * Native Instruments Kore Controller * Native Instruments Kore Controller 2 * Native Instruments Audio Kontrol 1 + * Native Instruments Audio 4 DJ * Native Instruments Audio 8 DJ + * Native Instruments Guitar Rig Session I/O + * Native Instruments Guitar Rig mobile To compile this driver as a module, choose M here: the module will be called snd-usb-caiaq. diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c index b3a603325835..fc6d571eeac6 100644 --- a/sound/usb/caiaq/caiaq-audio.c +++ b/sound/usb/caiaq/caiaq-audio.c @@ -638,9 +638,10 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO): - dev->samplerates |= SNDRV_PCM_RATE_88200; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE): dev->samplerates |= SNDRV_PCM_RATE_192000; - break; + /* fall thru */ + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): dev->samplerates |= SNDRV_PCM_RATE_88200; break; diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c index ccd763dd7167..6ac5489a0f22 100644 --- a/sound/usb/caiaq/caiaq-control.c +++ b/sound/usb/caiaq/caiaq-control.c @@ -39,14 +39,15 @@ static int control_info(struct snd_kcontrol *kcontrol, struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); int pos = kcontrol->private_value; int is_intval = pos & CNT_INTVAL; + unsigned int id = dev->chip.usb_id; uinfo->count = 1; pos &= ~CNT_INTVAL; - if (dev->chip.usb_id == - USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ) + if (((id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) || + (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ))) && (pos == 0)) { - /* current input mode of A8DJ */ + /* current input mode of A8DJ and A4DJ */ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->value.integer.min = 0; uinfo->value.integer.max = 2; @@ -247,6 +248,10 @@ static struct caiaq_controller a8dj_controller[] = { { "Software lock", 40 } }; +static struct caiaq_controller a4dj_controller[] = { + { "Current input mode", 0 | CNT_INTVAL } +}; + static int __devinit add_controls(struct caiaq_controller *c, int num, struct snd_usb_caiaqdev *dev) { @@ -295,6 +300,10 @@ int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev) ret = add_controls(a8dj_controller, ARRAY_SIZE(a8dj_controller), dev); break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): + ret = add_controls(a4dj_controller, + ARRAY_SIZE(a4dj_controller), dev); + break; } return ret; diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index 41c36b055f6b..d09fc2a88cf3 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -42,15 +42,17 @@ #endif MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.10"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.11"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," "{Native Instruments, Kore Controller}," "{Native Instruments, Kore Controller 2}," "{Native Instruments, Audio Kontrol 1}," + "{Native Instruments, Audio 4 DJ}," "{Native Instruments, Audio 8 DJ}," - "{Native Instruments, Session I/O}}"); + "{Native Instruments, Session I/O}," + "{Native Instruments, GuitarRig mobile}"); static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ @@ -116,6 +118,16 @@ static struct usb_device_id snd_usb_id_table[] = { .idVendor = USB_VID_NATIVEINSTRUMENTS, .idProduct = USB_PID_SESSIONIO }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_GUITARRIGMOBILE + }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_AUDIO4DJ + }, { /* terminator */ } }; diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h index ab56e738c5fc..0560c327d996 100644 --- a/sound/usb/caiaq/caiaq-device.h +++ b/sound/usb/caiaq/caiaq-device.h @@ -10,8 +10,10 @@ #define USB_PID_KORECONTROLLER 0x4711 #define USB_PID_KORECONTROLLER2 0x4712 #define USB_PID_AK1 0x0815 +#define USB_PID_AUDIO4DJ 0x0839 #define USB_PID_AUDIO8DJ 0x1978 #define USB_PID_SESSIONIO 0x1915 +#define USB_PID_GUITARRIGMOBILE 0x0d8d #define EP1_BUFSIZE 64 #define CAIAQ_USB_STR_LEN 0xff -- cgit v1.2.3 From 2aceefefc891e85d336c1d95d9d89fd785f5d44c Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Fri, 16 Jan 2009 11:04:18 +0000 Subject: ASoC: Driver for the WM9705 AC97 codec. This driver adds support for the wm9705 ac97 codec. The driver supports audio input and output. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 3 + sound/soc/codecs/wm9705.c | 410 ++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm9705.h | 14 ++ 4 files changed, 431 insertions(+) create mode 100644 sound/soc/codecs/wm9705.c create mode 100644 sound/soc/codecs/wm9705.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index d0e0d691ae51..cb5fcd605acc 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -34,6 +34,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8903 if I2C select SND_SOC_WM8971 if I2C select SND_SOC_WM8990 if I2C + select SND_SOC_WM9705 if SND_SOC_AC97_BUS select SND_SOC_WM9712 if SND_SOC_AC97_BUS select SND_SOC_WM9713 if SND_SOC_AC97_BUS help @@ -144,6 +145,9 @@ config SND_SOC_WM8971 config SND_SOC_WM8990 tristate +config SND_SOC_WM9705 + tristate + config SND_SOC_WM9712 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index c4ddc9aa2bbd..3664cdc300b2 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -23,6 +23,7 @@ snd-soc-wm8900-objs := wm8900.o snd-soc-wm8903-objs := wm8903.o snd-soc-wm8971-objs := wm8971.o snd-soc-wm8990-objs := wm8990.o +snd-soc-wm9705-objs := wm9705.o snd-soc-wm9712-objs := wm9712.o snd-soc-wm9713-objs := wm9713.o @@ -51,5 +52,7 @@ obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o +obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o +obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c new file mode 100644 index 000000000000..cb26b6a77ffb --- /dev/null +++ b/sound/soc/codecs/wm9705.c @@ -0,0 +1,410 @@ +/* + * wm9705.c -- ALSA Soc WM9705 codec support + * + * Copyright 2008 Ian Molton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; Version 2 of the License only. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * WM9705 register cache + */ +static const u16 wm9705_reg[] = { + 0x6150, 0x8000, 0x8000, 0x8000, /* 0x0 */ + 0x0000, 0x8000, 0x8008, 0x8008, /* 0x8 */ + 0x8808, 0x8808, 0x8808, 0x8808, /* 0x10 */ + 0x8808, 0x0000, 0x8000, 0x0000, /* 0x18 */ + 0x0000, 0x0000, 0x0000, 0x000f, /* 0x20 */ + 0x0605, 0x0000, 0xbb80, 0x0000, /* 0x28 */ + 0x0000, 0xbb80, 0x0000, 0x0000, /* 0x30 */ + 0x0000, 0x2000, 0x0000, 0x0000, /* 0x38 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 0x40 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 0x48 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 0x50 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 0x58 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 0x60 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 0x68 */ + 0x0000, 0x0808, 0x0000, 0x0006, /* 0x70 */ + 0x0000, 0x0000, 0x574d, 0x4c05, /* 0x78 */ +}; + +static const struct snd_kcontrol_new wm9705_snd_ac97_controls[] = { + SOC_DOUBLE("Master Playback Volume", AC97_MASTER, 8, 0, 31, 1), + SOC_SINGLE("Master Playback Switch", AC97_MASTER, 15, 1, 1), + SOC_DOUBLE("Headphone Playback Volume", AC97_HEADPHONE, 8, 0, 31, 1), + SOC_SINGLE("Headphone Playback Switch", AC97_HEADPHONE, 15, 1, 1), + SOC_DOUBLE("PCM Playback Volume", AC97_PCM, 8, 0, 31, 1), + SOC_SINGLE("PCM Playback Switch", AC97_PCM, 15, 1, 1), + SOC_SINGLE("Mono Playback Volume", AC97_MASTER_MONO, 0, 31, 1), + SOC_SINGLE("Mono Playback Switch", AC97_MASTER_MONO, 15, 1, 1), + SOC_SINGLE("PCBeep Playback Volume", AC97_PC_BEEP, 1, 15, 1), + SOC_SINGLE("Phone Playback Volume", AC97_PHONE, 0, 31, 1), + SOC_DOUBLE("Line Playback Volume", AC97_LINE, 8, 0, 31, 1), + SOC_DOUBLE("CD Playback Volume", AC97_CD, 8, 0, 31, 1), + SOC_SINGLE("Mic Playback Volume", AC97_MIC, 0, 31, 1), + SOC_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 6, 1, 0), + SOC_DOUBLE("PCM Capture Volume", AC97_REC_GAIN, 8, 0, 15, 0), + SOC_SINGLE("PCM Capture Switch", AC97_REC_GAIN, 15, 1, 1), +}; + +static const char *wm9705_mic[] = {"Mic 1", "Mic 2"}; +static const char *wm9705_rec_sel[] = {"Mic", "CD", "NC", "NC", + "Line", "Stereo Mix", "Mono Mix", "Phone"}; + +static const struct soc_enum wm9705_enum_mic = + SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 8, 2, wm9705_mic); +static const struct soc_enum wm9705_enum_rec_l = + SOC_ENUM_SINGLE(AC97_REC_SEL, 8, 8, wm9705_rec_sel); +static const struct soc_enum wm9705_enum_rec_r = + SOC_ENUM_SINGLE(AC97_REC_SEL, 0, 8, wm9705_rec_sel); + +/* Headphone Mixer */ +static const struct snd_kcontrol_new wm9705_hp_mixer_controls[] = { + SOC_DAPM_SINGLE("PCBeep Playback Switch", AC97_PC_BEEP, 15, 1, 1), + SOC_DAPM_SINGLE("CD Playback Switch", AC97_CD, 15, 1, 1), + SOC_DAPM_SINGLE("Mic Playback Switch", AC97_MIC, 15, 1, 1), + SOC_DAPM_SINGLE("Phone Playback Switch", AC97_PHONE, 15, 1, 1), + SOC_DAPM_SINGLE("Line Playback Switch", AC97_LINE, 15, 1, 1), +}; + +/* Mic source */ +static const struct snd_kcontrol_new wm9705_mic_src_controls = + SOC_DAPM_ENUM("Route", wm9705_enum_mic); + +/* Capture source */ +static const struct snd_kcontrol_new wm9705_capture_selectl_controls = + SOC_DAPM_ENUM("Route", wm9705_enum_rec_l); +static const struct snd_kcontrol_new wm9705_capture_selectr_controls = + SOC_DAPM_ENUM("Route", wm9705_enum_rec_r); + +/* DAPM widgets */ +static const struct snd_soc_dapm_widget wm9705_dapm_widgets[] = { + SND_SOC_DAPM_MUX("Mic Source", SND_SOC_NOPM, 0, 0, + &wm9705_mic_src_controls), + SND_SOC_DAPM_MUX("Left Capture Source", SND_SOC_NOPM, 0, 0, + &wm9705_capture_selectl_controls), + SND_SOC_DAPM_MUX("Right Capture Source", SND_SOC_NOPM, 0, 0, + &wm9705_capture_selectr_controls), + SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback", + SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback", + SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MIXER_NAMED_CTL("HP Mixer", SND_SOC_NOPM, 0, 0, + &wm9705_hp_mixer_controls[0], + ARRAY_SIZE(wm9705_hp_mixer_controls)), + SND_SOC_DAPM_MIXER("Mono Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_PGA("Headphone PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Speaker PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Line PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Line out PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Mono PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Phone PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Mic PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("PCBEEP PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("CD PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("ADC PGA", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HPOUTL"), + SND_SOC_DAPM_OUTPUT("HPOUTR"), + SND_SOC_DAPM_OUTPUT("LOUT"), + SND_SOC_DAPM_OUTPUT("ROUT"), + SND_SOC_DAPM_OUTPUT("MONOOUT"), + SND_SOC_DAPM_INPUT("PHONE"), + SND_SOC_DAPM_INPUT("LINEINL"), + SND_SOC_DAPM_INPUT("LINEINR"), + SND_SOC_DAPM_INPUT("CDINL"), + SND_SOC_DAPM_INPUT("CDINR"), + SND_SOC_DAPM_INPUT("PCBEEP"), + SND_SOC_DAPM_INPUT("MIC1"), + SND_SOC_DAPM_INPUT("MIC2"), +}; + +/* Audio map + * WM9705 has no switches to disable the route from the inputs to the HP mixer + * so in order to prevent active inputs from forcing the audio outputs to be + * constantly enabled, we use the mutes on those inputs to simulate such + * controls. + */ +static const struct snd_soc_dapm_route audio_map[] = { + /* HP mixer */ + {"HP Mixer", "PCBeep Playback Switch", "PCBEEP PGA"}, + {"HP Mixer", "CD Playback Switch", "CD PGA"}, + {"HP Mixer", "Mic Playback Switch", "Mic PGA"}, + {"HP Mixer", "Phone Playback Switch", "Phone PGA"}, + {"HP Mixer", "Line Playback Switch", "Line PGA"}, + {"HP Mixer", NULL, "Left DAC"}, + {"HP Mixer", NULL, "Right DAC"}, + + /* mono mixer */ + {"Mono Mixer", NULL, "HP Mixer"}, + + /* outputs */ + {"Headphone PGA", NULL, "HP Mixer"}, + {"HPOUTL", NULL, "Headphone PGA"}, + {"HPOUTR", NULL, "Headphone PGA"}, + {"Line out PGA", NULL, "HP Mixer"}, + {"LOUT", NULL, "Line out PGA"}, + {"ROUT", NULL, "Line out PGA"}, + {"Mono PGA", NULL, "Mono Mixer"}, + {"MONOOUT", NULL, "Mono PGA"}, + + /* inputs */ + {"CD PGA", NULL, "CDINL"}, + {"CD PGA", NULL, "CDINR"}, + {"Line PGA", NULL, "LINEINL"}, + {"Line PGA", NULL, "LINEINR"}, + {"Phone PGA", NULL, "PHONE"}, + {"Mic Source", "Mic 1", "MIC1"}, + {"Mic Source", "Mic 2", "MIC2"}, + {"Mic PGA", NULL, "Mic Source"}, + {"PCBEEP PGA", NULL, "PCBEEP"}, + + /* Left capture selector */ + {"Left Capture Source", "Mic", "Mic Source"}, + {"Left Capture Source", "CD", "CDINL"}, + {"Left Capture Source", "Line", "LINEINL"}, + {"Left Capture Source", "Stereo Mix", "HP Mixer"}, + {"Left Capture Source", "Mono Mix", "HP Mixer"}, + {"Left Capture Source", "Phone", "PHONE"}, + + /* Right capture source */ + {"Right Capture Source", "Mic", "Mic Source"}, + {"Right Capture Source", "CD", "CDINR"}, + {"Right Capture Source", "Line", "LINEINR"}, + {"Right Capture Source", "Stereo Mix", "HP Mixer"}, + {"Right Capture Source", "Mono Mix", "HP Mixer"}, + {"Right Capture Source", "Phone", "PHONE"}, + + {"ADC PGA", NULL, "Left Capture Source"}, + {"ADC PGA", NULL, "Right Capture Source"}, + + /* ADC's */ + {"Left ADC", NULL, "ADC PGA"}, + {"Right ADC", NULL, "ADC PGA"}, +}; + +static int wm9705_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm9705_dapm_widgets, + ARRAY_SIZE(wm9705_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + snd_soc_dapm_new_widgets(codec); + + return 0; +} + +/* We use a register cache to enhance read performance. */ +static unsigned int ac97_read(struct snd_soc_codec *codec, unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + switch (reg) { + case AC97_RESET: + case AC97_VENDOR_ID1: + case AC97_VENDOR_ID2: + return soc_ac97_ops.read(codec->ac97, reg); + default: + reg = reg >> 1; + + if (reg >= (ARRAY_SIZE(wm9705_reg))) + return -EIO; + + return cache[reg]; + } +} + +static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val) +{ + u16 *cache = codec->reg_cache; + + soc_ac97_ops.write(codec->ac97, reg, val); + reg = reg >> 1; + if (reg < (ARRAY_SIZE(wm9705_reg))) + cache[reg] = val; + + return 0; +} + +static int ac97_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + int reg; + u16 vra; + + vra = ac97_read(codec, AC97_EXTENDED_STATUS); + ac97_write(codec, AC97_EXTENDED_STATUS, vra | 0x1); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + reg = AC97_PCM_FRONT_DAC_RATE; + else + reg = AC97_PCM_LR_ADC_RATE; + + return ac97_write(codec, reg, runtime->rate); +} + +#define WM9705_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | \ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +struct snd_soc_dai wm9705_dai[] = { + { + .name = "AC97 HiFi", + .ac97_control = 1, + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM9705_AC97_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM9705_AC97_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = { + .prepare = ac97_prepare, + }, + }, + { + .name = "AC97 Aux", + .playback = { + .stream_name = "Aux Playback", + .channels_min = 1, + .channels_max = 1, + .rates = WM9705_AC97_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + } +}; +EXPORT_SYMBOL_GPL(wm9705_dai); + +static int wm9705_reset(struct snd_soc_codec *codec) +{ + if (soc_ac97_ops.reset) { + soc_ac97_ops.reset(codec->ac97); + if (ac97_read(codec, 0) == wm9705_reg[0]) + return 0; /* Success */ + } + + return -EIO; +} + +static int wm9705_soc_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + printk(KERN_INFO "WM9705 SoC Audio Codec\n"); + + socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (socdev->codec == NULL) + return -ENOMEM; + codec = socdev->codec; + mutex_init(&codec->mutex); + + codec->reg_cache = kmemdup(wm9705_reg, sizeof(wm9705_reg), GFP_KERNEL); + if (codec->reg_cache == NULL) { + ret = -ENOMEM; + goto cache_err; + } + codec->reg_cache_size = sizeof(wm9705_reg); + codec->reg_cache_step = 2; + + codec->name = "WM9705"; + codec->owner = THIS_MODULE; + codec->dai = wm9705_dai; + codec->num_dai = ARRAY_SIZE(wm9705_dai); + codec->write = ac97_write; + codec->read = ac97_read; + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); + if (ret < 0) { + printk(KERN_ERR "wm9705: failed to register AC97 codec\n"); + goto codec_err; + } + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) + goto pcm_err; + + ret = wm9705_reset(codec); + if (ret) + goto reset_err; + + snd_soc_add_controls(codec, wm9705_snd_ac97_controls, + ARRAY_SIZE(wm9705_snd_ac97_controls)); + wm9705_add_widgets(codec); + + ret = snd_soc_init_card(socdev); + if (ret < 0) { + printk(KERN_ERR "wm9705: failed to register card\n"); + goto pcm_err; + } + + return 0; + +reset_err: + snd_soc_free_pcms(socdev); +pcm_err: + snd_soc_free_ac97_codec(codec); +codec_err: + kfree(codec->reg_cache); +cache_err: + kfree(socdev->codec); + socdev->codec = NULL; + return ret; +} + +static int wm9705_soc_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec == NULL) + return 0; + + snd_soc_dapm_free(socdev); + snd_soc_free_pcms(socdev); + snd_soc_free_ac97_codec(codec); + kfree(codec->reg_cache); + kfree(codec); + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm9705 = { + .probe = wm9705_soc_probe, + .remove = wm9705_soc_remove, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm9705); + +MODULE_DESCRIPTION("ASoC WM9705 driver"); +MODULE_AUTHOR("Ian Molton"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/wm9705.h b/sound/soc/codecs/wm9705.h new file mode 100644 index 000000000000..d380f110f9e2 --- /dev/null +++ b/sound/soc/codecs/wm9705.h @@ -0,0 +1,14 @@ +/* + * wm9705.h -- WM9705 Soc Audio driver + */ + +#ifndef _WM9705_H +#define _WM9705_H + +#define WM9705_DAI_AC97_HIFI 0 +#define WM9705_DAI_AC97_AUX 1 + +extern struct snd_soc_dai wm9705_dai[2]; +extern struct snd_soc_codec_device soc_codec_dev_wm9705; + +#endif -- cgit v1.2.3 From a7e2e735dcf98717150d3c8eaa731de8038af05a Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Thu, 8 Jan 2009 21:03:55 +0000 Subject: ASoC: machine driver for Toshiba e750 This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- arch/arm/mach-pxa/e750.c | 5 + arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 + sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/e750_wm9705.c | 189 ++++++++++++++++++++++++++ 5 files changed, 210 insertions(+) create mode 100644 sound/soc/pxa/e750_wm9705.c diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index be1ab8edb973..665066fd280e 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO4_GPIO, /* Headphone amp power */ + GPIO7_GPIO, /* Speaker amp power */ + GPIO37_GPIO, /* Headphone detect */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index efbd2aa9ecec..02b28e0ed73b 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,11 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e750 audio control GPIOs */ +#define GPIO_E750_HP_AMP_OFF 4 +#define GPIO_E750_SPK_AMP_OFF 7 +#define GPIO_E750_HP_DETECT 37 + /* ASIC related GPIOs */ #define GPIO_ESERIES_TMIO_IRQ 5 #define GPIO_ESERIES_TMIO_PCLR 19 diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index f82e10699471..b9b1a3f5d673 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -61,6 +61,15 @@ config SND_PXA2XX_SOC_TOSA Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C6000x models (Tosa). +config SND_PXA2XX_SOC_E750 + tristate "SoC AC97 Audio support for e750" + depends on SND_PXA2XX_SOC && MACH_E750 + select SND_SOC_WM9705 + select SND_PXA2XX_SOC_AC97 + help + Say Y if you want to add support for SoC audio on the + toshiba e750 PDA + config SND_PXA2XX_SOC_E800 tristate "SoC AC97 Audio support for e800" depends on SND_PXA2XX_SOC && MACH_E800 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 08a9f2797729..c7d4cceeed92 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o snd-soc-corgi-objs := corgi.o snd-soc-poodle-objs := poodle.o snd-soc-tosa-objs := tosa.o +snd-soc-e750-objs := e750_wm9705.o snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o @@ -22,6 +23,7 @@ snd-soc-zylonite-objs := zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o +obj-$(CONFIG_SND_PXA2XX_SOC_E750) += snd-soc-e750.o obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c new file mode 100644 index 000000000000..20fbdcfa9f78 --- /dev/null +++ b/sound/soc/pxa/e750_wm9705.c @@ -0,0 +1,189 @@ +/* + * e750-wm9705.c -- SoC audio for e750 + * + * Copyright 2007 (c) Ian Molton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 ONLY. + * + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "../codecs/wm9705.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" + +static int e750_spk_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + gpio_set_value(GPIO_E750_SPK_AMP_OFF, 0); + else if (event & SND_SOC_DAPM_POST_PMD) + gpio_set_value(GPIO_E750_SPK_AMP_OFF, 1); + + return 0; +} + +static int e750_hp_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + gpio_set_value(GPIO_E750_HP_AMP_OFF, 0); + else if (event & SND_SOC_DAPM_POST_PMD) + gpio_set_value(GPIO_E750_HP_AMP_OFF, 1); + + return 0; +} + +static const struct snd_soc_dapm_widget e750_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_MIC("Mic (Internal)", NULL), + SND_SOC_DAPM_PGA_E("Headphone Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e750_hp_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("Speaker Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e750_spk_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Amp", NULL, "HPOUTL"}, + {"Headphone Amp", NULL, "HPOUTR"}, + {"Headphone Jack", NULL, "Headphone Amp"}, + + {"Speaker Amp", NULL, "MONOOUT"}, + {"Speaker", NULL, "Speaker Amp"}, + + {"MIC1", NULL, "Mic (Internal)"}, +}; + +static int e750_ac97_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_nc_pin(codec, "LOUT"); + snd_soc_dapm_nc_pin(codec, "ROUT"); + snd_soc_dapm_nc_pin(codec, "PHONE"); + snd_soc_dapm_nc_pin(codec, "LINEINL"); + snd_soc_dapm_nc_pin(codec, "LINEINR"); + snd_soc_dapm_nc_pin(codec, "CDINL"); + snd_soc_dapm_nc_pin(codec, "CDINR"); + snd_soc_dapm_nc_pin(codec, "PCBEEP"); + snd_soc_dapm_nc_pin(codec, "MIC2"); + + snd_soc_dapm_new_controls(codec, e750_dapm_widgets, + ARRAY_SIZE(e750_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link e750_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_HIFI], + .init = e750_ac97_init, + /* use ops to check startup state */ + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_AUX], + }, +}; + +static struct snd_soc_card e750 = { + .name = "Toshiba e750", + .platform = &pxa2xx_soc_platform, + .dai_link = e750_dai, + .num_links = ARRAY_SIZE(e750_dai), +}; + +static struct snd_soc_device e750_snd_devdata = { + .card = &e750, + .codec_dev = &soc_codec_dev_wm9705, +}; + +static struct platform_device *e750_snd_device; + +static int __init e750_init(void) +{ + int ret; + + if (!machine_is_e750()) + return -ENODEV; + + ret = gpio_request(GPIO_E750_HP_AMP_OFF, "Headphone amp"); + if (ret) + return ret; + + ret = gpio_request(GPIO_E750_SPK_AMP_OFF, "Speaker amp"); + if (ret) + goto free_hp_amp_gpio; + + ret = gpio_direction_output(GPIO_E750_HP_AMP_OFF, 1); + if (ret) + goto free_spk_amp_gpio; + + ret = gpio_direction_output(GPIO_E750_SPK_AMP_OFF, 1); + if (ret) + goto free_spk_amp_gpio; + + e750_snd_device = platform_device_alloc("soc-audio", -1); + if (!e750_snd_device) { + ret = -ENOMEM; + goto free_spk_amp_gpio; + } + + platform_set_drvdata(e750_snd_device, &e750_snd_devdata); + e750_snd_devdata.dev = &e750_snd_device->dev; + ret = platform_device_add(e750_snd_device); + + if (!ret) + return 0; + +/* Fail gracefully */ + platform_device_put(e750_snd_device); +free_spk_amp_gpio: + gpio_free(GPIO_E750_SPK_AMP_OFF); +free_hp_amp_gpio: + gpio_free(GPIO_E750_HP_AMP_OFF); + + return ret; +} + +static void __exit e750_exit(void) +{ + platform_device_unregister(e750_snd_device); + gpio_free(GPIO_E750_SPK_AMP_OFF); + gpio_free(GPIO_E750_HP_AMP_OFF); +} + +module_init(e750_init); +module_exit(e750_exit); + +/* Module information */ +MODULE_AUTHOR("Ian Molton "); +MODULE_DESCRIPTION("ALSA SoC driver for e750"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 0465c7aa6fbab89de820442aed449ceb8d9145a6 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Thu, 8 Jan 2009 21:16:05 +0000 Subject: ASoC: machine driver for Toshiba e800 This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 ++ sound/soc/pxa/e800_wm9712.c | 116 ++++++++++++++++++++++---- 2 files changed, 107 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index 02b28e0ed73b..6d6e4d8fa4c1 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -50,6 +50,11 @@ #define GPIO_E750_SPK_AMP_OFF 7 #define GPIO_E750_HP_DETECT 37 +/* e800 audio control GPIOs */ +#define GPIO_E800_HP_DETECT 81 +#define GPIO_E800_HP_AMP_OFF 82 +#define GPIO_E800_SPK_AMP_ON 83 + /* ASIC related GPIOs */ #define GPIO_ESERIES_TMIO_IRQ 5 #define GPIO_ESERIES_TMIO_PCLR 19 diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c index 2e3386dfa0f0..78a1770b986c 100644 --- a/sound/soc/pxa/e800_wm9712.c +++ b/sound/soc/pxa/e800_wm9712.c @@ -1,8 +1,6 @@ /* * e800-wm9712.c -- SoC audio for e800 * - * Based on tosa.c - * * Copyright 2007 (c) Ian Molton * * This program is free software; you can redistribute it and/or modify it @@ -13,31 +11,96 @@ #include #include -#include +#include #include #include #include #include -#include #include #include #include +#include + +#include #include "../codecs/wm9712.h" #include "pxa2xx-pcm.h" #include "pxa2xx-ac97.h" -static struct snd_soc_card e800; +static int e800_spk_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + gpio_set_value(GPIO_E800_SPK_AMP_ON, 1); + else if (event & SND_SOC_DAPM_POST_PMD) + gpio_set_value(GPIO_E800_SPK_AMP_ON, 0); -static struct snd_soc_dai_link e800_dai[] = { + return 0; +} + +static int e800_hp_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) { - .name = "AC97 Aux", - .stream_name = "AC97 Aux", - .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], - .codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX], -}, + if (event & SND_SOC_DAPM_PRE_PMU) + gpio_set_value(GPIO_E800_HP_AMP_OFF, 0); + else if (event & SND_SOC_DAPM_POST_PMD) + gpio_set_value(GPIO_E800_HP_AMP_OFF, 1); + + return 0; +} + +static const struct snd_soc_dapm_widget e800_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic (Internal1)", NULL), + SND_SOC_DAPM_MIC("Mic (Internal2)", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_PGA_E("Headphone Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e800_hp_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("Speaker Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e800_spk_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "HPOUTL"}, + {"Headphone Jack", NULL, "HPOUTR"}, + {"Headphone Jack", NULL, "Headphone Amp"}, + + {"Speaker Amp", NULL, "MONOOUT"}, + {"Speaker", NULL, "Speaker Amp"}, + + {"MIC1", NULL, "Mic (Internal1)"}, + {"MIC2", NULL, "Mic (Internal2)"}, +}; + +static int e800_ac97_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, e800_dapm_widgets, + ARRAY_SIZE(e800_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link e800_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI], + .init = e800_ac97_init, + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX], + }, }; static struct snd_soc_card e800 = { @@ -61,6 +124,22 @@ static int __init e800_init(void) if (!machine_is_e800()) return -ENODEV; + ret = gpio_request(GPIO_E800_HP_AMP_OFF, "Headphone amp"); + if (ret) + return ret; + + ret = gpio_request(GPIO_E800_SPK_AMP_ON, "Speaker amp"); + if (ret) + goto free_hp_amp_gpio; + + ret = gpio_direction_output(GPIO_E800_HP_AMP_OFF, 1); + if (ret) + goto free_spk_amp_gpio; + + ret = gpio_direction_output(GPIO_E800_SPK_AMP_ON, 1); + if (ret) + goto free_spk_amp_gpio; + e800_snd_device = platform_device_alloc("soc-audio", -1); if (!e800_snd_device) return -ENOMEM; @@ -69,8 +148,15 @@ static int __init e800_init(void) e800_snd_devdata.dev = &e800_snd_device->dev; ret = platform_device_add(e800_snd_device); - if (ret) - platform_device_put(e800_snd_device); + if (!ret) + return 0; + +/* Fail gracefully */ + platform_device_put(e800_snd_device); +free_spk_amp_gpio: + gpio_free(GPIO_E800_SPK_AMP_ON); +free_hp_amp_gpio: + gpio_free(GPIO_E800_HP_AMP_OFF); return ret; } @@ -78,6 +164,8 @@ static int __init e800_init(void) static void __exit e800_exit(void) { platform_device_unregister(e800_snd_device); + gpio_free(GPIO_E800_SPK_AMP_ON); + gpio_free(GPIO_E800_HP_AMP_OFF); } module_init(e800_init); @@ -86,4 +174,4 @@ module_exit(e800_exit); /* Module information */ MODULE_AUTHOR("Ian Molton "); MODULE_DESCRIPTION("ALSA SoC driver for e800"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From c42f69bb064333624dcc1452ed109441c3c9e7b4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 16 Jan 2009 16:31:03 +0000 Subject: ASoC: Ignore output frequency for WM9713 PLL The WM9713 driver does not support configuring the PLL output frequency so the output frequency parameter is irrelevant. Allow users to set it to zero by ignoring it. Signed-off-by: Mark Brown --- sound/soc/codecs/wm9713.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index a45622620db7..e636d8a18ed6 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -32,7 +32,6 @@ struct wm9713_priv { u32 pll_in; /* PLL input frequency */ - u32 pll_out; /* PLL output frequency */ }; static unsigned int ac97_read(struct snd_soc_codec *codec, @@ -723,13 +722,13 @@ static int wm9713_set_pll(struct snd_soc_codec *codec, struct _pll_div pll_div; /* turn PLL off ? */ - if (freq_in == 0 || freq_out == 0) { + if (freq_in == 0) { /* disable PLL power and select ext source */ reg = ac97_read(codec, AC97_HANDSET_RATE); ac97_write(codec, AC97_HANDSET_RATE, reg | 0x0080); reg = ac97_read(codec, AC97_EXTENDED_MID); ac97_write(codec, AC97_EXTENDED_MID, reg | 0x0200); - wm9713->pll_out = 0; + wm9713->pll_in = 0; return 0; } @@ -773,7 +772,6 @@ static int wm9713_set_pll(struct snd_soc_codec *codec, ac97_write(codec, AC97_EXTENDED_MID, reg & 0xfdff); reg = ac97_read(codec, AC97_HANDSET_RATE); ac97_write(codec, AC97_HANDSET_RATE, reg & 0xff7f); - wm9713->pll_out = freq_out; wm9713->pll_in = freq_in; /* wait 10ms AC97 link frames for the link to stabilise */ @@ -1149,8 +1147,8 @@ static int wm9713_soc_resume(struct platform_device *pdev) wm9713_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* do we need to re-start the PLL ? */ - if (wm9713->pll_out) - wm9713_set_pll(codec, 0, wm9713->pll_in, wm9713->pll_out); + if (wm9713->pll_in) + wm9713_set_pll(codec, 0, wm9713->pll_in, 0); /* only synchronise the codec if warm reset failed */ if (ret == 0) { -- cgit v1.2.3 From 9ef344f89ac41116d4ab138b0941c784a3ab8cf4 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 16 Jan 2009 22:47:30 +0100 Subject: ALSA: wss-lib: remove "pops" before each played sound A WSS codec is autocalibrated each time before playing sound. Do only one calibration during codec initialization. Complete snd_wss_calibrate_mute to mute loopback volume as well. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/wss/wss_lib.c | 41 +++++++++++++---------------------------- 1 file changed, 13 insertions(+), 28 deletions(-) diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 13299aebd077..f0c0be5bb684 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -181,25 +181,6 @@ static void snd_wss_wait(struct snd_wss *chip) udelay(100); } -static void snd_wss_outm(struct snd_wss *chip, unsigned char reg, - unsigned char mask, unsigned char value) -{ - unsigned char tmp = (chip->image[reg] & mask) | value; - - snd_wss_wait(chip); -#ifdef CONFIG_SND_DEBUG - if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) - snd_printk("outm: auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value); -#endif - chip->image[reg] = tmp; - if (!chip->calibrate_mute) { - wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg); - wmb(); - wss_outb(chip, CS4231P(REG), tmp); - mb(); - } -} - static void snd_wss_dout(struct snd_wss *chip, unsigned char reg, unsigned char value) { @@ -587,7 +568,15 @@ static void snd_wss_calibrate_mute(struct snd_wss *chip, int mute) chip->image[CS4231_RIGHT_INPUT]); snd_wss_dout(chip, CS4231_LOOPBACK, chip->image[CS4231_LOOPBACK]); + } else { + snd_wss_dout(chip, CS4231_LEFT_INPUT, + 0); + snd_wss_dout(chip, CS4231_RIGHT_INPUT, + 0); + snd_wss_dout(chip, CS4231_LOOPBACK, + 0xfd); } + snd_wss_dout(chip, CS4231_AUX1_LEFT_INPUT, mute | chip->image[CS4231_AUX1_LEFT_INPUT]); snd_wss_dout(chip, CS4231_AUX1_RIGHT_INPUT, @@ -630,7 +619,6 @@ static void snd_wss_playback_format(struct snd_wss *chip, int full_calib = 1; mutex_lock(&chip->mce_mutex); - snd_wss_calibrate_mute(chip, 1); if (chip->hardware == WSS_HW_CS4231A || (chip->hardware & WSS_HW_CS4232_MASK)) { spin_lock_irqsave(&chip->reg_lock, flags); @@ -681,7 +669,6 @@ static void snd_wss_playback_format(struct snd_wss *chip, udelay(100); /* this seems to help */ snd_wss_mce_down(chip); } - snd_wss_calibrate_mute(chip, 0); mutex_unlock(&chip->mce_mutex); } @@ -693,7 +680,6 @@ static void snd_wss_capture_format(struct snd_wss *chip, int full_calib = 1; mutex_lock(&chip->mce_mutex); - snd_wss_calibrate_mute(chip, 1); if (chip->hardware == WSS_HW_CS4231A || (chip->hardware & WSS_HW_CS4232_MASK)) { spin_lock_irqsave(&chip->reg_lock, flags); @@ -750,7 +736,6 @@ static void snd_wss_capture_format(struct snd_wss *chip, spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); } - snd_wss_calibrate_mute(chip, 0); mutex_unlock(&chip->mce_mutex); } @@ -807,6 +792,7 @@ static void snd_wss_init(struct snd_wss *chip) { unsigned long flags; + snd_wss_calibrate_mute(chip, 1); snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE @@ -830,6 +816,8 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); + chip->image[CS4231_IFACE_CTRL] &= ~CS4231_AUTOCALIB; + snd_wss_out(chip, CS4231_IFACE_CTRL, chip->image[CS4231_IFACE_CTRL]); snd_wss_out(chip, CS4231_ALT_FEATURE_1, chip->image[CS4231_ALT_FEATURE_1]); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -863,6 +851,7 @@ static void snd_wss_init(struct snd_wss *chip) chip->image[CS4231_REC_FORMAT]); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); + snd_wss_calibrate_mute(chip, 0); #ifdef SNDRV_DEBUG_MCE snd_printk("init: (5)\n"); @@ -921,8 +910,6 @@ static void snd_wss_close(struct snd_wss *chip, unsigned int mode) mutex_unlock(&chip->open_mutex); return; } - snd_wss_calibrate_mute(chip, 1); - /* disable IRQ */ spin_lock_irqsave(&chip->reg_lock, flags); if (!(chip->hardware & WSS_HW_AD1848_MASK)) @@ -955,8 +942,6 @@ static void snd_wss_close(struct snd_wss *chip, unsigned int mode) wss_outb(chip, CS4231P(STATUS), 0); /* clear IRQ */ spin_unlock_irqrestore(&chip->reg_lock, flags); - snd_wss_calibrate_mute(chip, 0); - chip->mode = 0; mutex_unlock(&chip->open_mutex); } @@ -1149,7 +1134,7 @@ irqreturn_t snd_wss_interrupt(int irq, void *dev_id) if (chip->hardware & WSS_HW_AD1848_MASK) wss_outb(chip, CS4231P(STATUS), 0); else - snd_wss_outm(chip, CS4231_IRQ_STATUS, status, 0); + snd_wss_out(chip, CS4231_IRQ_STATUS, status); spin_unlock(&chip->reg_lock); return IRQ_HANDLED; } -- cgit v1.2.3 From 8693290b9038f32b6b9bafd97b7e18465d62655b Mon Sep 17 00:00:00 2001 From: Andreas Bergmeier Date: Sun, 18 Jan 2009 18:48:03 +0100 Subject: ALSA: usb-audio - Quirk for Serato phono Ignore errors (wrong usb interface data) found when using the serato scratch live box with alsa Thus the alsa controls can be accessed (beware: they don't work though - but at least it's one ugly error message less) Signed-off-by: Andreas Bergmeier Signed-off-by: Takashi Iwai --- sound/usb/usbmixer_maps.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c index f41214f3ad6b..3e5d66cf1f5a 100644 --- a/sound/usb/usbmixer_maps.c +++ b/sound/usb/usbmixer_maps.c @@ -261,6 +261,22 @@ static struct usbmix_name_map aureon_51_2_map[] = { {} /* terminator */ }; +static struct usbmix_name_map scratch_live_map[] = { + /* 1: IT Line 1 (USB streaming) */ + /* 2: OT Line 1 (Speaker) */ + /* 3: IT Line 1 (Line connector) */ + { 4, "Line 1 In" }, /* FU */ + /* 5: OT Line 1 (USB streaming) */ + /* 6: IT Line 2 (USB streaming) */ + /* 7: OT Line 2 (Speaker) */ + /* 8: IT Line 2 (Line connector) */ + { 9, "Line 2 In" }, /* FU */ + /* 10: OT Line 2 (USB streaming) */ + /* 11: IT Mic (Line connector) */ + /* 12: OT Mic (USB streaming) */ + { 0 } /* terminator */ +}; + /* * Control map entries */ @@ -316,6 +332,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x0ccd, 0x0028), .map = aureon_51_2_map, }, + { + .id = USB_ID(0x13e5, 0x0001), + .map = scratch_live_map, + .ignore_ctl_error = 1, + }, { 0 } /* terminator */ }; -- cgit v1.2.3 From 0d90a7ec48c704025307b129413bc62451b20ab3 Mon Sep 17 00:00:00 2001 From: "David P. Quigley" Date: Fri, 16 Jan 2009 09:22:02 -0500 Subject: SELinux: Condense super block security structure flags and cleanup necessary code. The super block security structure currently has three fields for what are essentially flags. The flags field is used for mount options while two other char fields are used for initialization and proc flags. These latter two fields are essentially bit fields since the only used values are 0 and 1. These fields have been collapsed into the flags field and new bit masks have been added for them. The code is also fixed to work with these new flags. Signed-off-by: David P. Quigley Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 38 ++++++++++++++++++------------------- security/selinux/include/objsec.h | 2 -- security/selinux/include/security.h | 6 ++++++ 3 files changed, 24 insertions(+), 22 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 00815973d412..473adc5f4f9a 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -431,7 +431,7 @@ static int sb_finish_set_opts(struct super_block *sb) } } - sbsec->initialized = 1; + sbsec->flags |= SE_SBINITIALIZED; if (sbsec->behavior > ARRAY_SIZE(labeling_behaviors)) printk(KERN_ERR "SELinux: initialized (dev %s, type %s), unknown behavior\n", @@ -487,17 +487,13 @@ static int selinux_get_mnt_opts(const struct super_block *sb, security_init_mnt_opts(opts); - if (!sbsec->initialized) + if (!(sbsec->flags & SE_SBINITIALIZED)) return -EINVAL; if (!ss_initialized) return -EINVAL; - /* - * if we ever use sbsec flags for anything other than tracking mount - * settings this is going to need a mask - */ - tmp = sbsec->flags; + tmp = sbsec->flags & SE_MNTMASK; /* count the number of mount options for this sb */ for (i = 0; i < 8; i++) { if (tmp & 0x01) @@ -562,8 +558,10 @@ out_free: static int bad_option(struct superblock_security_struct *sbsec, char flag, u32 old_sid, u32 new_sid) { + char mnt_flags = sbsec->flags & SE_MNTMASK; + /* check if the old mount command had the same options */ - if (sbsec->initialized) + if (sbsec->flags & SE_SBINITIALIZED) if (!(sbsec->flags & flag) || (old_sid != new_sid)) return 1; @@ -571,8 +569,8 @@ static int bad_option(struct superblock_security_struct *sbsec, char flag, /* check if we were passed the same options twice, * aka someone passed context=a,context=b */ - if (!sbsec->initialized) - if (sbsec->flags & flag) + if (!(sbsec->flags & SE_SBINITIALIZED)) + if (mnt_flags & flag) return 1; return 0; } @@ -626,7 +624,7 @@ static int selinux_set_mnt_opts(struct super_block *sb, * this sb does not set any security options. (The first options * will be used for both mounts) */ - if (sbsec->initialized && (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA) + if ((sbsec->flags & SE_SBINITIALIZED) && (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA) && (num_opts == 0)) goto out; @@ -690,19 +688,19 @@ static int selinux_set_mnt_opts(struct super_block *sb, } } - if (sbsec->initialized) { + if (sbsec->flags & SE_SBINITIALIZED) { /* previously mounted with options, but not on this attempt? */ - if (sbsec->flags && !num_opts) + if ((sbsec->flags & SE_MNTMASK) && !num_opts) goto out_double_mount; rc = 0; goto out; } if (strcmp(sb->s_type->name, "proc") == 0) - sbsec->proc = 1; + sbsec->flags |= SE_SBPROC; /* Determine the labeling behavior to use for this filesystem type. */ - rc = security_fs_use(sbsec->proc ? "proc" : sb->s_type->name, &sbsec->behavior, &sbsec->sid); + rc = security_fs_use((sbsec->flags & SE_SBPROC) ? "proc" : sb->s_type->name, &sbsec->behavior, &sbsec->sid); if (rc) { printk(KERN_WARNING "%s: security_fs_use(%s) returned %d\n", __func__, sb->s_type->name, rc); @@ -806,10 +804,10 @@ static void selinux_sb_clone_mnt_opts(const struct super_block *oldsb, } /* how can we clone if the old one wasn't set up?? */ - BUG_ON(!oldsbsec->initialized); + BUG_ON(!(oldsbsec->flags & SE_SBINITIALIZED)); /* if fs is reusing a sb, just let its options stand... */ - if (newsbsec->initialized) + if (newsbsec->flags & SE_SBINITIALIZED) return; mutex_lock(&newsbsec->lock); @@ -1209,7 +1207,7 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent goto out_unlock; sbsec = inode->i_sb->s_security; - if (!sbsec->initialized) { + if (!(sbsec->flags & SE_SBINITIALIZED)) { /* Defer initialization until selinux_complete_init, after the initial policy is loaded and the security server is ready to handle calls. */ @@ -1326,7 +1324,7 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent /* Default to the fs superblock SID. */ isec->sid = sbsec->sid; - if (sbsec->proc && !S_ISLNK(inode->i_mode)) { + if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) { struct proc_inode *proci = PROC_I(inode); if (proci->pde) { isec->sclass = inode_mode_to_security_class(inode->i_mode); @@ -2585,7 +2583,7 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir, } /* Possibly defer initialization to selinux_complete_init. */ - if (sbsec->initialized) { + if (sbsec->flags & SE_SBINITIALIZED) { struct inode_security_struct *isec = inode->i_security; isec->sclass = inode_mode_to_security_class(inode->i_mode); isec->sid = newsid; diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h index 3cc45168f674..c4e062336ef3 100644 --- a/security/selinux/include/objsec.h +++ b/security/selinux/include/objsec.h @@ -60,9 +60,7 @@ struct superblock_security_struct { u32 def_sid; /* default SID for labeling */ u32 mntpoint_sid; /* SECURITY_FS_USE_MNTPOINT context for files */ unsigned int behavior; /* labeling behavior */ - unsigned char initialized; /* initialization flag */ unsigned char flags; /* which mount options were specified */ - unsigned char proc; /* proc fs */ struct mutex lock; struct list_head isec_head; spinlock_t isec_lock; diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index 72447370bc95..ff4e19ccd8f8 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -37,10 +37,16 @@ #define POLICYDB_VERSION_MAX POLICYDB_VERSION_BOUNDARY #endif +/* Mask for just the mount related flags */ +#define SE_MNTMASK 0x0f +/* Super block security struct flags for mount options */ #define CONTEXT_MNT 0x01 #define FSCONTEXT_MNT 0x02 #define ROOTCONTEXT_MNT 0x04 #define DEFCONTEXT_MNT 0x08 +/* Non-mount related flags */ +#define SE_SBINITIALIZED 0x10 +#define SE_SBPROC 0x20 #define CONTEXT_STR "context=" #define FSCONTEXT_STR "fscontext=" -- cgit v1.2.3 From 11689d47f0957121920c9ec646eb5d838755853a Mon Sep 17 00:00:00 2001 From: "David P. Quigley" Date: Fri, 16 Jan 2009 09:22:03 -0500 Subject: SELinux: Add new security mount option to indicate security label support. There is no easy way to tell if a file system supports SELinux security labeling. Because of this a new flag is being added to the super block security structure to indicate that the particular super block supports labeling. This flag is set for file systems using the xattr, task, and transition labeling methods unless that behavior is overridden by context mounts. Signed-off-by: David P. Quigley Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 39 ++++++++++++++++++++++++++++++++----- security/selinux/include/security.h | 2 ++ 2 files changed, 36 insertions(+), 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 473adc5f4f9a..1a9768a8b644 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -89,7 +89,7 @@ #define XATTR_SELINUX_SUFFIX "selinux" #define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX -#define NUM_SEL_MNT_OPTS 4 +#define NUM_SEL_MNT_OPTS 5 extern unsigned int policydb_loaded_version; extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm); @@ -353,6 +353,7 @@ enum { Opt_fscontext = 2, Opt_defcontext = 3, Opt_rootcontext = 4, + Opt_labelsupport = 5, }; static const match_table_t tokens = { @@ -360,6 +361,7 @@ static const match_table_t tokens = { {Opt_fscontext, FSCONTEXT_STR "%s"}, {Opt_defcontext, DEFCONTEXT_STR "%s"}, {Opt_rootcontext, ROOTCONTEXT_STR "%s"}, + {Opt_labelsupport, LABELSUPP_STR}, {Opt_error, NULL}, }; @@ -431,7 +433,7 @@ static int sb_finish_set_opts(struct super_block *sb) } } - sbsec->flags |= SE_SBINITIALIZED; + sbsec->flags |= (SE_SBINITIALIZED | SE_SBLABELSUPP); if (sbsec->behavior > ARRAY_SIZE(labeling_behaviors)) printk(KERN_ERR "SELinux: initialized (dev %s, type %s), unknown behavior\n", @@ -441,6 +443,12 @@ static int sb_finish_set_opts(struct super_block *sb) sb->s_id, sb->s_type->name, labeling_behaviors[sbsec->behavior-1]); + if (sbsec->behavior == SECURITY_FS_USE_GENFS || + sbsec->behavior == SECURITY_FS_USE_MNTPOINT || + sbsec->behavior == SECURITY_FS_USE_NONE || + sbsec->behavior > ARRAY_SIZE(labeling_behaviors)) + sbsec->flags &= ~SE_SBLABELSUPP; + /* Initialize the root inode. */ rc = inode_doinit_with_dentry(root_inode, root); @@ -500,6 +508,9 @@ static int selinux_get_mnt_opts(const struct super_block *sb, opts->num_mnt_opts++; tmp >>= 1; } + /* Check if the Label support flag is set */ + if (sbsec->flags & SE_SBLABELSUPP) + opts->num_mnt_opts++; opts->mnt_opts = kcalloc(opts->num_mnt_opts, sizeof(char *), GFP_ATOMIC); if (!opts->mnt_opts) { @@ -545,6 +556,10 @@ static int selinux_get_mnt_opts(const struct super_block *sb, opts->mnt_opts[i] = context; opts->mnt_opts_flags[i++] = ROOTCONTEXT_MNT; } + if (sbsec->flags & SE_SBLABELSUPP) { + opts->mnt_opts[i] = NULL; + opts->mnt_opts_flags[i++] = SE_SBLABELSUPP; + } BUG_ON(i != opts->num_mnt_opts); @@ -635,6 +650,9 @@ static int selinux_set_mnt_opts(struct super_block *sb, */ for (i = 0; i < num_opts; i++) { u32 sid; + + if (flags[i] == SE_SBLABELSUPP) + continue; rc = security_context_to_sid(mount_options[i], strlen(mount_options[i]), &sid); if (rc) { @@ -915,7 +933,8 @@ static int selinux_parse_opts_str(char *options, goto out_err; } break; - + case Opt_labelsupport: + break; default: rc = -EINVAL; printk(KERN_WARNING "SELinux: unknown mount option\n"); @@ -997,7 +1016,12 @@ static void selinux_write_opts(struct seq_file *m, char *prefix; for (i = 0; i < opts->num_mnt_opts; i++) { - char *has_comma = strchr(opts->mnt_opts[i], ','); + char *has_comma; + + if (opts->mnt_opts[i]) + has_comma = strchr(opts->mnt_opts[i], ','); + else + has_comma = NULL; switch (opts->mnt_opts_flags[i]) { case CONTEXT_MNT: @@ -1012,6 +1036,10 @@ static void selinux_write_opts(struct seq_file *m, case DEFCONTEXT_MNT: prefix = DEFCONTEXT_STR; break; + case SE_SBLABELSUPP: + seq_putc(m, ','); + seq_puts(m, LABELSUPP_STR); + continue; default: BUG(); }; @@ -2398,7 +2426,8 @@ static inline int selinux_option(char *option, int len) return (match_prefix(CONTEXT_STR, sizeof(CONTEXT_STR)-1, option, len) || match_prefix(FSCONTEXT_STR, sizeof(FSCONTEXT_STR)-1, option, len) || match_prefix(DEFCONTEXT_STR, sizeof(DEFCONTEXT_STR)-1, option, len) || - match_prefix(ROOTCONTEXT_STR, sizeof(ROOTCONTEXT_STR)-1, option, len)); + match_prefix(ROOTCONTEXT_STR, sizeof(ROOTCONTEXT_STR)-1, option, len) || + match_prefix(LABELSUPP_STR, sizeof(LABELSUPP_STR)-1, option, len)); } static inline void take_option(char **to, char *from, int *first, int len) diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index ff4e19ccd8f8..e1d9db779983 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -47,11 +47,13 @@ /* Non-mount related flags */ #define SE_SBINITIALIZED 0x10 #define SE_SBPROC 0x20 +#define SE_SBLABELSUPP 0x40 #define CONTEXT_STR "context=" #define FSCONTEXT_STR "fscontext=" #define ROOTCONTEXT_STR "rootcontext=" #define DEFCONTEXT_STR "defcontext=" +#define LABELSUPP_STR "seclabel" struct netlbl_lsm_secattr; -- cgit v1.2.3 From cd89596f0ccfa3ccb8a81ce47782231cf7ea7296 Mon Sep 17 00:00:00 2001 From: "David P. Quigley" Date: Fri, 16 Jan 2009 09:22:04 -0500 Subject: SELinux: Unify context mount and genfs behavior Context mounts and genfs labeled file systems behave differently with respect to setting file system labels. This patch brings genfs labeled file systems in line with context mounts in that setxattr calls to them should return EOPNOTSUPP and fscreate calls will be ignored. Signed-off-by: David P. Quigley Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 1a9768a8b644..3bb4942e39cc 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1613,7 +1613,7 @@ static int may_create(struct inode *dir, if (rc) return rc; - if (!newsid || sbsec->behavior == SECURITY_FS_USE_MNTPOINT) { + if (!newsid || !(sbsec->flags & SE_SBLABELSUPP)) { rc = security_transition_sid(sid, dsec->sid, tclass, &newsid); if (rc) return rc; @@ -2597,7 +2597,7 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir, sid = tsec->sid; newsid = tsec->create_sid; - if (!newsid || sbsec->behavior == SECURITY_FS_USE_MNTPOINT) { + if (!newsid || !(sbsec->flags & SE_SBLABELSUPP)) { rc = security_transition_sid(sid, dsec->sid, inode_mode_to_security_class(inode->i_mode), &newsid); @@ -2619,7 +2619,7 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir, isec->initialized = 1; } - if (!ss_initialized || sbsec->behavior == SECURITY_FS_USE_MNTPOINT) + if (!ss_initialized || !(sbsec->flags & SE_SBLABELSUPP)) return -EOPNOTSUPP; if (name) { @@ -2796,7 +2796,7 @@ static int selinux_inode_setxattr(struct dentry *dentry, const char *name, return selinux_inode_setotherxattr(dentry, name); sbsec = inode->i_sb->s_security; - if (sbsec->behavior == SECURITY_FS_USE_MNTPOINT) + if (!(sbsec->flags & SE_SBLABELSUPP)) return -EOPNOTSUPP; if (!is_owner_or_cap(inode)) -- cgit v1.2.3 From f3a374e55a60f7ca57335c24ef875731b6683147 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 19 Jan 2009 14:30:48 +0100 Subject: ALSA: ca0106 - Add quirk for GA-G1975X mobo Giga-byte GA-G1975X mobo has a CA0106 on-board chip. Reference: bnc#395807 https://bugzilla.novell.com/show_bug.cgi?id=395807 Signed-off-by: Takashi Iwai --- sound/pci/ca0106/ca0106_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 0e62205d4081..3aac7e6489c6 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -255,6 +255,14 @@ static struct snd_ca0106_details ca0106_chip_details[] = { .gpio_type = 2, .i2c_adc = 1, .spi_dac = 1 } , + /* Giga-byte GA-G1975X mobo + * Novell bnc#395807 + */ + /* FIXME: the GPIO and I2C setting aren't tested well */ + { .serial = 0x1458a006, + .name = "Giga-byte GA-G1975X", + .gpio_type = 1, + .i2c_adc = 1 }, /* Shuttle XPC SD31P which has an onboard Creative Labs * Sound Blaster Live! 24-bit EAX * high-definition 7.1 audio processor". -- cgit v1.2.3 From cade9f8a9cf1cd41f6f9e8850c6a0465a21248c3 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 19 Jan 2009 12:08:58 +0100 Subject: ALSA: Release v1.0.19 Signed-off-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- include/sound/version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/version.h b/include/sound/version.h index 2b48237e23bf..a7e74e23ad2e 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h */ -#define CONFIG_SND_VERSION "1.0.18a" +#define CONFIG_SND_VERSION "1.0.19" #define CONFIG_SND_DATE "" -- cgit v1.2.3 From 2c782f5981a022f7a238d550af5daa75c8acf382 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 16 Jan 2009 16:35:52 +0000 Subject: ASoC: Implement support for CLK_POUT as MCLK on Zylonite The Zylonite supports switching the MCLK for the WM9713 between the AC97CLK and CLK_POUT outputs of the PXA processor via switch SW15 on the board. This patch adds support for configuring the system to use CLK_POUT. Unfortunately it is not possible to read the state of SW15 from software so this feature is controlled by a module option 'clk_pout' which should be set to a non-zero value to enable the use of CLK_POUT. Signed-off-by: Mark Brown --- sound/soc/pxa/zylonite.c | 101 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 84 insertions(+), 17 deletions(-) diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c index f8e9ecd589d3..8541b679f6eb 100644 --- a/sound/soc/pxa/zylonite.c +++ b/sound/soc/pxa/zylonite.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -26,6 +27,17 @@ #include "pxa2xx-ac97.h" #include "pxa-ssp.h" +/* + * There is a physical switch SW15 on the board which changes the MCLK + * for the WM9713 between the standard AC97 master clock and the + * output of the CLK_POUT signal from the PXA. + */ +static int clk_pout; +module_param(clk_pout, int, 0); +MODULE_PARM_DESC(clk_pout, "Use CLK_POUT as WM9713 MCLK (SW15 on board)."); + +static struct clk *pout; + static struct snd_soc_card zylonite; static const struct snd_soc_dapm_widget zylonite_dapm_widgets[] = { @@ -61,10 +73,8 @@ static const struct snd_soc_dapm_route audio_map[] = { static int zylonite_wm9713_init(struct snd_soc_codec *codec) { - /* Currently we only support use of the AC97 clock here. If - * CLK_POUT is selected by SW15 then the clock API will need - * to be used to request and enable it here. - */ + if (clk_pout) + snd_soc_dai_set_pll(&codec->dai[0], 0, clk_get_rate(pout), 0); snd_soc_dapm_new_controls(codec, zylonite_dapm_widgets, ARRAY_SIZE(zylonite_dapm_widgets)); @@ -85,7 +95,6 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - unsigned int pll_out = 0; unsigned int acds = 0; unsigned int wm9713_div = 0; int ret = 0; @@ -93,16 +102,13 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, switch (params_rate(params)) { case 8000: wm9713_div = 12; - pll_out = 2048000; break; case 16000: wm9713_div = 6; - pll_out = 4096000; break; case 48000: default: wm9713_div = 2; - pll_out = 12288000; acds = 1; break; } @@ -123,10 +129,6 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, pll_out); - if (ret < 0) - return ret; - ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_AUDIO_DIV_ACDS, acds); if (ret < 0) return ret; @@ -135,11 +137,12 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* Note that if the PLL is in use the WM9713_PCMCLK_PLL_DIV needs - * to be set instead. - */ - ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV, - WM9713_PCMDIV(wm9713_div)); + if (clk_pout) + ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_PLL_DIV, + WM9713_PCMDIV(wm9713_div)); + else + ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV, + WM9713_PCMDIV(wm9713_div)); if (ret < 0) return ret; @@ -173,8 +176,72 @@ static struct snd_soc_dai_link zylonite_dai[] = { }, }; +static int zylonite_probe(struct platform_device *pdev) +{ + int ret; + + if (clk_pout) { + pout = clk_get(NULL, "CLK_POUT"); + if (IS_ERR(pout)) { + dev_err(&pdev->dev, "Unable to obtain CLK_POUT: %ld\n", + PTR_ERR(pout)); + return PTR_ERR(pout); + } + + ret = clk_enable(pout); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n", + ret); + clk_put(pout); + return ret; + } + + dev_dbg(&pdev->dev, "MCLK enabled at %luHz\n", + clk_get_rate(pout)); + } + + return 0; +} + +static int zylonite_remove(struct platform_device *pdev) +{ + if (clk_pout) { + clk_disable(pout); + clk_put(pout); + } + + return 0; +} + +static int zylonite_suspend_post(struct platform_device *pdev, + pm_message_t state) +{ + if (clk_pout) + clk_disable(pout); + + return 0; +} + +static int zylonite_resume_pre(struct platform_device *pdev) +{ + int ret = 0; + + if (clk_pout) { + ret = clk_enable(pout); + if (ret != 0) + dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n", + ret); + } + + return ret; +} + static struct snd_soc_card zylonite = { .name = "Zylonite", + .probe = &zylonite_probe, + .remove = &zylonite_remove, + .suspend_post = &zylonite_suspend_post, + .resume_pre = &zylonite_resume_pre, .platform = &pxa2xx_soc_platform, .dai_link = zylonite_dai, .num_links = ARRAY_SIZE(zylonite_dai), -- cgit v1.2.3 From 28796eaf806502b9bd86cbacf8edbc14c80c14b0 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Sat, 17 Jan 2009 15:11:06 +0000 Subject: ASoC: machine support for Toshiba e740 PDA This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- arch/arm/mach-pxa/e740.c | 5 + arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 + sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/e740_wm9705.c | 213 ++++++++++++++++++++++++++ 5 files changed, 234 insertions(+) create mode 100644 sound/soc/pxa/e740_wm9705.c diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 6d48e00f4f0b..a6fff782e7a8 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ + GPIO40_GPIO, /* Mic amp power */ + GPIO41_GPIO, /* Headphone amp power */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index 6d6e4d8fa4c1..f3e5509820d7 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,11 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e740 audio control GPIOs */ +#define GPIO_E740_WM9705_nAVDD2 16 +#define GPIO_E740_MIC_ON 40 +#define GPIO_E740_AMP_ON 41 + /* e750 audio control GPIOs */ #define GPIO_E750_HP_AMP_OFF 4 #define GPIO_E750_SPK_AMP_OFF 7 diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index b9b1a3f5d673..958ac3fe15d1 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -61,6 +61,15 @@ config SND_PXA2XX_SOC_TOSA Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C6000x models (Tosa). +config SND_PXA2XX_SOC_E740 + tristate "SoC AC97 Audio support for e740" + depends on SND_PXA2XX_SOC && MACH_E740 + select SND_SOC_WM9705 + select SND_PXA2XX_SOC_AC97 + help + Say Y if you want to add support for SoC audio on the + toshiba e740 PDA + config SND_PXA2XX_SOC_E750 tristate "SoC AC97 Audio support for e750" depends on SND_PXA2XX_SOC && MACH_E750 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index c7d4cceeed92..97a51a8c936c 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o snd-soc-corgi-objs := corgi.o snd-soc-poodle-objs := poodle.o snd-soc-tosa-objs := tosa.o +snd-soc-e740-objs := e740_wm9705.o snd-soc-e750-objs := e750_wm9705.o snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o @@ -23,6 +24,7 @@ snd-soc-zylonite-objs := zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o +obj-$(CONFIG_SND_PXA2XX_SOC_E740) += snd-soc-e740.o obj-$(CONFIG_SND_PXA2XX_SOC_E750) += snd-soc-e750.o obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c new file mode 100644 index 000000000000..ac3617651734 --- /dev/null +++ b/sound/soc/pxa/e740_wm9705.c @@ -0,0 +1,213 @@ +/* + * e740-wm9705.c -- SoC audio for e740 + * + * Copyright 2007 (c) Ian Molton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 ONLY. + * + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "../codecs/wm9705.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" + + +#define E740_AUDIO_OUT 1 +#define E740_AUDIO_IN 2 + +static int e740_audio_power; + +static void e740_sync_audio_power(int status) +{ + gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status); + gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0); + gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0); +} + +static int e740_mic_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + e740_audio_power |= E740_AUDIO_IN; + else if (event & SND_SOC_DAPM_POST_PMD) + e740_audio_power &= ~E740_AUDIO_IN; + + e740_sync_audio_power(e740_audio_power); + + return 0; +} + +static int e740_output_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + e740_audio_power |= E740_AUDIO_OUT; + else if (event & SND_SOC_DAPM_POST_PMD) + e740_audio_power &= ~E740_AUDIO_OUT; + + e740_sync_audio_power(e740_audio_power); + + return 0; +} + +static const struct snd_soc_dapm_widget e740_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_MIC("Mic (Internal)", NULL), + SND_SOC_DAPM_PGA_E("Output Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e740_output_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("Mic Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e740_mic_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Output Amp", NULL, "LOUT"}, + {"Output Amp", NULL, "ROUT"}, + {"Output Amp", NULL, "MONOOUT"}, + + {"Speaker", NULL, "Output Amp"}, + {"Headphone Jack", NULL, "Output Amp"}, + + {"MIC1", NULL, "Mic Amp"}, + {"Mic Amp", NULL, "Mic (Internal)"}, +}; + +static int e740_ac97_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_nc_pin(codec, "HPOUTL"); + snd_soc_dapm_nc_pin(codec, "HPOUTR"); + snd_soc_dapm_nc_pin(codec, "PHONE"); + snd_soc_dapm_nc_pin(codec, "LINEINL"); + snd_soc_dapm_nc_pin(codec, "LINEINR"); + snd_soc_dapm_nc_pin(codec, "CDINL"); + snd_soc_dapm_nc_pin(codec, "CDINR"); + snd_soc_dapm_nc_pin(codec, "PCBEEP"); + snd_soc_dapm_nc_pin(codec, "MIC2"); + + snd_soc_dapm_new_controls(codec, e740_dapm_widgets, + ARRAY_SIZE(e740_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link e740_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_HIFI], + .init = e740_ac97_init, + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_AUX], + }, +}; + +static struct snd_soc_card e740 = { + .name = "Toshiba e740", + .platform = &pxa2xx_soc_platform, + .dai_link = e740_dai, + .num_links = ARRAY_SIZE(e740_dai), +}; + +static struct snd_soc_device e740_snd_devdata = { + .card = &e740, + .codec_dev = &soc_codec_dev_wm9705, +}; + +static struct platform_device *e740_snd_device; + +static int __init e740_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + ret = gpio_request(GPIO_E740_MIC_ON, "Mic amp"); + if (ret) + return ret; + + ret = gpio_request(GPIO_E740_AMP_ON, "Output amp"); + if (ret) + goto free_mic_amp_gpio; + + ret = gpio_request(GPIO_E740_WM9705_nAVDD2, "Audio power"); + if (ret) + goto free_op_amp_gpio; + + /* Disable audio */ + ret = gpio_direction_output(GPIO_E740_MIC_ON, 0); + if (ret) + goto free_apwr_gpio; + ret = gpio_direction_output(GPIO_E740_AMP_ON, 0); + if (ret) + goto free_apwr_gpio; + ret = gpio_direction_output(GPIO_E740_WM9705_nAVDD2, 1); + if (ret) + goto free_apwr_gpio; + + e740_snd_device = platform_device_alloc("soc-audio", -1); + if (!e740_snd_device) { + ret = -ENOMEM; + goto free_apwr_gpio; + } + + platform_set_drvdata(e740_snd_device, &e740_snd_devdata); + e740_snd_devdata.dev = &e740_snd_device->dev; + ret = platform_device_add(e740_snd_device); + + if (!ret) + return 0; + +/* Fail gracefully */ + platform_device_put(e740_snd_device); +free_apwr_gpio: + gpio_free(GPIO_E740_WM9705_nAVDD2); +free_op_amp_gpio: + gpio_free(GPIO_E740_AMP_ON); +free_mic_amp_gpio: + gpio_free(GPIO_E740_MIC_ON); + + return ret; +} + +static void __exit e740_exit(void) +{ + platform_device_unregister(e740_snd_device); +} + +module_init(e740_init); +module_exit(e740_exit); + +/* Module information */ +MODULE_AUTHOR("Ian Molton "); +MODULE_DESCRIPTION("ALSA SoC driver for e740"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 91432e976ff1323e5dd6f52498969602953c6ee9 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Sat, 17 Jan 2009 17:44:23 +0000 Subject: ASoC: fixes to caching implementations This patch takes fixes a number of bugs in the caching code used by several ASoC codec drivers. Mostly off-by-one fixes. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- sound/soc/codecs/ac97.c | 2 -- sound/soc/codecs/ad1980.c | 4 ++-- sound/soc/codecs/twl4030.c | 3 +++ sound/soc/codecs/wm8580.c | 4 ++-- sound/soc/codecs/wm8728.c | 4 ++-- sound/soc/codecs/wm8753.c | 4 ++-- sound/soc/codecs/wm8990.c | 4 ++-- sound/soc/codecs/wm9712.c | 4 ++-- sound/soc/codecs/wm9713.c | 4 ++-- 9 files changed, 17 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index fb53e6511af2..89d41277616d 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -123,7 +123,6 @@ bus_err: snd_soc_free_pcms(socdev); err: - kfree(socdev->codec->reg_cache); kfree(socdev->codec); socdev->codec = NULL; return ret; @@ -138,7 +137,6 @@ static int ac97_soc_remove(struct platform_device *pdev) return 0; snd_soc_free_pcms(socdev); - kfree(socdev->codec->reg_cache); kfree(socdev->codec); return 0; diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index c3c5d0eee37a..faf358758e13 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -109,7 +109,7 @@ static unsigned int ac97_read(struct snd_soc_codec *codec, default: reg = reg >> 1; - if (reg >= (ARRAY_SIZE(ad1980_reg))) + if (reg >= ARRAY_SIZE(ad1980_reg)) return -EINVAL; return cache[reg]; @@ -123,7 +123,7 @@ static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, soc_ac97_ops.write(codec->ac97, reg, val); reg = reg >> 1; - if (reg < (ARRAY_SIZE(ad1980_reg))) + if (reg < ARRAY_SIZE(ad1980_reg)) cache[reg] = val; return 0; diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index ddc9f37d863f..f530c1e6d9e8 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -125,6 +125,9 @@ static inline unsigned int twl4030_read_reg_cache(struct snd_soc_codec *codec, { u8 *cache = codec->reg_cache; + if (reg >= TWL4030_CACHEREGNUM) + return -EIO; + return cache[reg]; } diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 9b75a377453e..3faf0e70ce10 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -200,7 +200,7 @@ static inline unsigned int wm8580_read_reg_cache(struct snd_soc_codec *codec, unsigned int reg) { u16 *cache = codec->reg_cache; - BUG_ON(reg > ARRAY_SIZE(wm8580_reg)); + BUG_ON(reg >= ARRAY_SIZE(wm8580_reg)); return cache[reg]; } @@ -223,7 +223,7 @@ static int wm8580_write(struct snd_soc_codec *codec, unsigned int reg, { u8 data[2]; - BUG_ON(reg > ARRAY_SIZE(wm8580_reg)); + BUG_ON(reg >= ARRAY_SIZE(wm8580_reg)); /* Registers are 9 bits wide */ value &= 0x1ff; diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c index defa310bc7d9..f90dc52e975d 100644 --- a/sound/soc/codecs/wm8728.c +++ b/sound/soc/codecs/wm8728.c @@ -47,7 +47,7 @@ static inline unsigned int wm8728_read_reg_cache(struct snd_soc_codec *codec, unsigned int reg) { u16 *cache = codec->reg_cache; - BUG_ON(reg > ARRAY_SIZE(wm8728_reg_defaults)); + BUG_ON(reg >= ARRAY_SIZE(wm8728_reg_defaults)); return cache[reg]; } @@ -55,7 +55,7 @@ static inline void wm8728_write_reg_cache(struct snd_soc_codec *codec, u16 reg, unsigned int value) { u16 *cache = codec->reg_cache; - BUG_ON(reg > ARRAY_SIZE(wm8728_reg_defaults)); + BUG_ON(reg >= ARRAY_SIZE(wm8728_reg_defaults)); cache[reg] = value; } diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 7283178e0eb5..5a1c1fca120f 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -97,7 +97,7 @@ static inline unsigned int wm8753_read_reg_cache(struct snd_soc_codec *codec, unsigned int reg) { u16 *cache = codec->reg_cache; - if (reg < 1 || reg > (ARRAY_SIZE(wm8753_reg) + 1)) + if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1)) return -1; return cache[reg - 1]; } @@ -109,7 +109,7 @@ static inline void wm8753_write_reg_cache(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { u16 *cache = codec->reg_cache; - if (reg < 1 || reg > 0x3f) + if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1)) return; cache[reg - 1] = value; } diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 6b2778632d5e..f93c0955ed9d 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -116,7 +116,7 @@ static inline unsigned int wm8990_read_reg_cache(struct snd_soc_codec *codec, unsigned int reg) { u16 *cache = codec->reg_cache; - BUG_ON(reg > (ARRAY_SIZE(wm8990_reg)) - 1); + BUG_ON(reg >= ARRAY_SIZE(wm8990_reg)); return cache[reg]; } @@ -129,7 +129,7 @@ static inline void wm8990_write_reg_cache(struct snd_soc_codec *codec, u16 *cache = codec->reg_cache; /* Reset register and reserved registers are uncached */ - if (reg == 0 || reg > ARRAY_SIZE(wm8990_reg) - 1) + if (reg == 0 || reg >= ARRAY_SIZE(wm8990_reg)) return; cache[reg] = value; diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 1b0ace0f4dca..4dc90d67530e 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -452,7 +452,7 @@ static unsigned int ac97_read(struct snd_soc_codec *codec, else { reg = reg >> 1; - if (reg > (ARRAY_SIZE(wm9712_reg))) + if (reg >= (ARRAY_SIZE(wm9712_reg))) return -EIO; return cache[reg]; @@ -466,7 +466,7 @@ static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, soc_ac97_ops.write(codec->ac97, reg, val); reg = reg >> 1; - if (reg <= (ARRAY_SIZE(wm9712_reg))) + if (reg < (ARRAY_SIZE(wm9712_reg))) cache[reg] = val; return 0; diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index e636d8a18ed6..0e60e16973d4 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -620,7 +620,7 @@ static unsigned int ac97_read(struct snd_soc_codec *codec, else { reg = reg >> 1; - if (reg > (ARRAY_SIZE(wm9713_reg))) + if (reg >= (ARRAY_SIZE(wm9713_reg))) return -EIO; return cache[reg]; @@ -634,7 +634,7 @@ static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, if (reg < 0x7c) soc_ac97_ops.write(codec->ac97, reg, val); reg = reg >> 1; - if (reg <= (ARRAY_SIZE(wm9713_reg))) + if (reg < (ARRAY_SIZE(wm9713_reg))) cache[reg] = val; return 0; -- cgit v1.2.3 From b2a19d02396c92294abcddee5bd9bd49cc4e4d1c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 17 Jan 2009 19:14:26 +0000 Subject: ASoC: Staticise PCM operations tables The PCM operations tables are not exported directly but are instead included in the platform structure so should be declared static. Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-pcm.c | 2 +- sound/soc/au1x/dbdma2.c | 2 +- sound/soc/blackfin/bf5xx-ac97-pcm.c | 2 +- sound/soc/blackfin/bf5xx-i2s-pcm.c | 2 +- sound/soc/davinci/davinci-pcm.c | 2 +- sound/soc/omap/omap-pcm.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 3dcdc4e3cfa0..9ef6b96373f5 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -347,7 +347,7 @@ static int atmel_pcm_mmap(struct snd_pcm_substream *substream, vma->vm_end - vma->vm_start, vma->vm_page_prot); } -struct snd_pcm_ops atmel_pcm_ops = { +static struct snd_pcm_ops atmel_pcm_ops = { .open = atmel_pcm_open, .close = atmel_pcm_close, .ioctl = snd_pcm_lib_ioctl, diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index bc8d654576c0..30490a259148 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -305,7 +305,7 @@ static int au1xpsc_pcm_close(struct snd_pcm_substream *substream) return 0; } -struct snd_pcm_ops au1xpsc_pcm_ops = { +static struct snd_pcm_ops au1xpsc_pcm_ops = { .open = au1xpsc_pcm_open, .close = au1xpsc_pcm_close, .ioctl = snd_pcm_lib_ioctl, diff --git a/sound/soc/blackfin/bf5xx-ac97-pcm.c b/sound/soc/blackfin/bf5xx-ac97-pcm.c index 8067cfafa3a7..8cfed1a5dcbe 100644 --- a/sound/soc/blackfin/bf5xx-ac97-pcm.c +++ b/sound/soc/blackfin/bf5xx-ac97-pcm.c @@ -297,7 +297,7 @@ static int bf5xx_pcm_copy(struct snd_pcm_substream *substream, int channel, } #endif -struct snd_pcm_ops bf5xx_pcm_ac97_ops = { +static struct snd_pcm_ops bf5xx_pcm_ac97_ops = { .open = bf5xx_pcm_open, .ioctl = snd_pcm_lib_ioctl, .hw_params = bf5xx_pcm_hw_params, diff --git a/sound/soc/blackfin/bf5xx-i2s-pcm.c b/sound/soc/blackfin/bf5xx-i2s-pcm.c index 53d290b3ea47..1318c4f627b7 100644 --- a/sound/soc/blackfin/bf5xx-i2s-pcm.c +++ b/sound/soc/blackfin/bf5xx-i2s-pcm.c @@ -184,7 +184,7 @@ static int bf5xx_pcm_mmap(struct snd_pcm_substream *substream, return 0 ; } -struct snd_pcm_ops bf5xx_pcm_i2s_ops = { +static struct snd_pcm_ops bf5xx_pcm_i2s_ops = { .open = bf5xx_pcm_open, .ioctl = snd_pcm_lib_ioctl, .hw_params = bf5xx_pcm_hw_params, diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index 366049d8578c..7af3b5b3a53d 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -286,7 +286,7 @@ static int davinci_pcm_mmap(struct snd_pcm_substream *substream, runtime->dma_bytes); } -struct snd_pcm_ops davinci_pcm_ops = { +static struct snd_pcm_ops davinci_pcm_ops = { .open = davinci_pcm_open, .close = davinci_pcm_close, .ioctl = snd_pcm_lib_ioctl, diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index b0362dfd5b71..607a38c7ae48 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -264,7 +264,7 @@ static int omap_pcm_mmap(struct snd_pcm_substream *substream, runtime->dma_bytes); } -struct snd_pcm_ops omap_pcm_ops = { +static struct snd_pcm_ops omap_pcm_ops = { .open = omap_pcm_open, .close = omap_pcm_close, .ioctl = snd_pcm_lib_ioctl, -- cgit v1.2.3 From 29fdbec2dcb1ce364812778271056aa9516ff3ed Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 13:07:55 +0100 Subject: ALSA: hda - Add extra volume offset to standard volume amp macros Added the volume offset to base for the standard volume controls to handle elements with too big volume scales like -96dB..0dB. For such elements, you can set the base volume to reduce the range. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 45 +++++++++++++++++++++++++++++++++++++-------- sound/pci/hda/hda_local.h | 5 ++++- 2 files changed, 41 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index b7bba7dc7cf1..0cf2424ada6a 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1119,6 +1119,7 @@ int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol, u16 nid = get_amp_nid(kcontrol); u8 chs = get_amp_channels(kcontrol); int dir = get_amp_direction(kcontrol); + unsigned int ofs = get_amp_offset(kcontrol); u32 caps; caps = query_amp_caps(codec, nid, dir); @@ -1130,6 +1131,8 @@ int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol, kcontrol->id.name); return -EINVAL; } + if (ofs < caps) + caps -= ofs; uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = chs == 3 ? 2 : 1; uinfo->value.integer.min = 0; @@ -1138,6 +1141,32 @@ int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol, } EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_info); + +static inline unsigned int +read_amp_value(struct hda_codec *codec, hda_nid_t nid, + int ch, int dir, int idx, unsigned int ofs) +{ + unsigned int val; + val = snd_hda_codec_amp_read(codec, nid, ch, dir, idx); + val &= HDA_AMP_VOLMASK; + if (val >= ofs) + val -= ofs; + else + val = 0; + return val; +} + +static inline int +update_amp_value(struct hda_codec *codec, hda_nid_t nid, + int ch, int dir, int idx, unsigned int ofs, + unsigned int val) +{ + if (val > 0) + val += ofs; + return snd_hda_codec_amp_update(codec, nid, ch, dir, idx, + HDA_AMP_VOLMASK, val); +} + int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -1146,14 +1175,13 @@ int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol, int chs = get_amp_channels(kcontrol); int dir = get_amp_direction(kcontrol); int idx = get_amp_index(kcontrol); + unsigned int ofs = get_amp_offset(kcontrol); long *valp = ucontrol->value.integer.value; if (chs & 1) - *valp++ = snd_hda_codec_amp_read(codec, nid, 0, dir, idx) - & HDA_AMP_VOLMASK; + *valp++ = read_amp_value(codec, nid, 0, dir, idx, ofs); if (chs & 2) - *valp = snd_hda_codec_amp_read(codec, nid, 1, dir, idx) - & HDA_AMP_VOLMASK; + *valp = read_amp_value(codec, nid, 1, dir, idx, ofs); return 0; } EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_get); @@ -1166,18 +1194,17 @@ int snd_hda_mixer_amp_volume_put(struct snd_kcontrol *kcontrol, int chs = get_amp_channels(kcontrol); int dir = get_amp_direction(kcontrol); int idx = get_amp_index(kcontrol); + unsigned int ofs = get_amp_offset(kcontrol); long *valp = ucontrol->value.integer.value; int change = 0; snd_hda_power_up(codec); if (chs & 1) { - change = snd_hda_codec_amp_update(codec, nid, 0, dir, idx, - 0x7f, *valp); + change = update_amp_value(codec, nid, 0, dir, idx, ofs, *valp); valp++; } if (chs & 2) - change |= snd_hda_codec_amp_update(codec, nid, 1, dir, idx, - 0x7f, *valp); + change |= update_amp_value(codec, nid, 1, dir, idx, ofs, *valp); snd_hda_power_down(codec); return change; } @@ -1189,6 +1216,7 @@ int snd_hda_mixer_amp_tlv(struct snd_kcontrol *kcontrol, int op_flag, struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = get_amp_nid(kcontrol); int dir = get_amp_direction(kcontrol); + unsigned int ofs = get_amp_offset(kcontrol); u32 caps, val1, val2; if (size < 4 * sizeof(unsigned int)) @@ -1197,6 +1225,7 @@ int snd_hda_mixer_amp_tlv(struct snd_kcontrol *kcontrol, int op_flag, val2 = (caps & AC_AMPCAP_STEP_SIZE) >> AC_AMPCAP_STEP_SIZE_SHIFT; val2 = (val2 + 1) * 25; val1 = -((caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT); + val1 += ofs; val1 = ((int)val1) * ((int)val2); if (put_user(SNDRV_CTL_TLVT_DB_SCALE, _tlv)) return -EFAULT; diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 1dd8716c387f..d53ce1f85419 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -26,8 +26,10 @@ /* * for mixer controls */ +#define HDA_COMPOSE_AMP_VAL_OFS(nid,chs,idx,dir,ofs) \ + ((nid) | ((chs)<<16) | ((dir)<<18) | ((idx)<<19) | ((ofs)<<23)) #define HDA_COMPOSE_AMP_VAL(nid,chs,idx,dir) \ - ((nid) | ((chs)<<16) | ((dir)<<18) | ((idx)<<19)) + HDA_COMPOSE_AMP_VAL_OFS(nid, chs, idx, dir, 0) /* mono volume with index (index=0,1,...) (channel=1,2) */ #define HDA_CODEC_VOLUME_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx, \ @@ -456,6 +458,7 @@ int snd_hda_check_amp_list_power(struct hda_codec *codec, #define get_amp_channels(kc) (((kc)->private_value >> 16) & 0x3) #define get_amp_direction(kc) (((kc)->private_value >> 18) & 0x1) #define get_amp_index(kc) (((kc)->private_value >> 19) & 0xf) +#define get_amp_offset(kc) (((kc)->private_value >> 23) & 0x3f) /* * CEA Short Audio Descriptor data -- cgit v1.2.3 From 7c7767ebe2fa847c91a0dd5551ca422aba359473 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 15:28:38 +0100 Subject: ALSA: hda - Halve too large volume scales for STAC/IDT codecs STAC/IDT codecs have often too large volume scales such as -96dB, and exposing this as is results in too large scale in percentage representation. This patch adds the check of the volume scale and halves the volume range if it's too large automatically. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 41 +++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a4d4afe6b4fc..c2d4abee3b09 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -166,6 +166,7 @@ struct sigmatel_spec { unsigned int alt_switch: 1; unsigned int hp_detect: 1; unsigned int spdif_mute: 1; + unsigned int check_volume_offset:1; /* gpio lines */ unsigned int eapd_mask; @@ -202,6 +203,8 @@ struct sigmatel_spec { hda_nid_t hp_dacs[5]; hda_nid_t speaker_dacs[5]; + int volume_offset; + /* capture */ hda_nid_t *adc_nids; unsigned int num_adcs; @@ -1297,6 +1300,8 @@ static int stac92xx_build_controls(struct hda_codec *codec) unsigned int vmaster_tlv[4]; snd_hda_set_vmaster_tlv(codec, spec->multiout.dac_nids[0], HDA_OUTPUT, vmaster_tlv); + /* correct volume offset */ + vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset; err = snd_hda_add_vmaster(codec, "Master Playback Volume", vmaster_tlv, slave_vols); if (err < 0) @@ -2980,14 +2985,34 @@ static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec) } /* create volume control/switch for the given prefx type */ -static int create_controls(struct sigmatel_spec *spec, const char *pfx, hda_nid_t nid, int chs) +static int create_controls(struct hda_codec *codec, const char *pfx, + hda_nid_t nid, int chs) { + struct sigmatel_spec *spec = codec->spec; char name[32]; int err; + if (!spec->check_volume_offset) { + unsigned int caps, step, nums, db_scale; + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + step = (caps & AC_AMPCAP_STEP_SIZE) >> + AC_AMPCAP_STEP_SIZE_SHIFT; + step = (step + 1) * 25; /* in .01dB unit */ + nums = (caps & AC_AMPCAP_NUM_STEPS) >> + AC_AMPCAP_NUM_STEPS_SHIFT; + db_scale = nums * step; + /* if dB scale is over -64dB, and finer enough, + * let's reduce it to half + */ + if (db_scale > 6400 && nums >= 0x1f) + spec->volume_offset = nums / 2; + spec->check_volume_offset = 1; + } + sprintf(name, "%s Playback Volume", pfx); err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, name, - HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT)); + HDA_COMPOSE_AMP_VAL_OFS(nid, chs, 0, HDA_OUTPUT, + spec->volume_offset)); if (err < 0) return err; sprintf(name, "%s Playback Switch", pfx); @@ -3053,10 +3078,10 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, nid = spec->multiout.dac_nids[i]; if (i == 2) { /* Center/LFE */ - err = create_controls(spec, "Center", nid, 1); + err = create_controls(codec, "Center", nid, 1); if (err < 0) return err; - err = create_controls(spec, "LFE", nid, 2); + err = create_controls(codec, "LFE", nid, 2); if (err < 0) return err; @@ -3084,7 +3109,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, break; } } - err = create_controls(spec, name, nid, 3); + err = create_controls(codec, name, nid, 3); if (err < 0) return err; } @@ -3139,7 +3164,7 @@ static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec, nid = spec->hp_dacs[i]; if (!nid) continue; - err = create_controls(spec, pfxs[nums++], nid, 3); + err = create_controls(codec, pfxs[nums++], nid, 3); if (err < 0) return err; } @@ -3153,7 +3178,7 @@ static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec, nid = spec->speaker_dacs[i]; if (!nid) continue; - err = create_controls(spec, pfxs[nums++], nid, 3); + err = create_controls(codec, pfxs[nums++], nid, 3); if (err < 0) return err; } @@ -3729,7 +3754,7 @@ static int stac9200_auto_create_lfe_ctls(struct hda_codec *codec, } if (lfe_pin) { - err = create_controls(spec, "LFE", lfe_pin, 1); + err = create_controls(codec, "LFE", lfe_pin, 1); if (err < 0) return err; } -- cgit v1.2.3 From 89ce9e87083216389d2ff5740cc60f835537d8d0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 17:15:57 +0100 Subject: ALSA: hda - Add debug prints for digital I/O pin detections Add the debug prints for digital I/O pin detections in snd_hda_parse_pin_def_config() function. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index b7bba7dc7cf1..c03de0bc3999 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3499,6 +3499,8 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, cfg->hp_pins[1], cfg->hp_pins[2], cfg->hp_pins[3], cfg->hp_pins[4]); snd_printd(" mono: mono_out=0x%x\n", cfg->mono_out_pin); + if (cfg->dig_out_pin) + snd_printd(" dig-out=0x%x\n", cfg->dig_out_pin); snd_printd(" inputs: mic=0x%x, fmic=0x%x, line=0x%x, fline=0x%x," " cd=0x%x, aux=0x%x\n", cfg->input_pins[AUTO_PIN_MIC], @@ -3507,6 +3509,8 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, cfg->input_pins[AUTO_PIN_FRONT_LINE], cfg->input_pins[AUTO_PIN_CD], cfg->input_pins[AUTO_PIN_AUX]); + if (cfg->dig_out_pin) + snd_printd(" dig-in=0x%x\n", cfg->dig_in_pin); return 0; } -- cgit v1.2.3 From 1b52ae701fedf97f9984e73b6a1fe2444230871b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 17:17:29 +0100 Subject: ALSA: hda - Detect non-SPDIF digital I/O Accept non-SPDIF digital I/O pins as the digital pins. These are usually corresponding to HDMI I/O. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c03de0bc3999..2d6f72ca0140 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3390,9 +3390,11 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, cfg->input_pins[AUTO_PIN_AUX] = nid; break; case AC_JACK_SPDIF_OUT: + case AC_JACK_DIG_OTHER_OUT: cfg->dig_out_pin = nid; break; case AC_JACK_SPDIF_IN: + case AC_JACK_DIG_OTHER_IN: cfg->dig_in_pin = nid; break; } -- cgit v1.2.3 From caa10b6e808a4d65eb0306f0006308244f2b8d79 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 17:19:01 +0100 Subject: ALSA: hda - Improve auto-probing of STAC9872 codec Use the standard STAC/IDT auto-probing routine for non-static STAC9872 codec probing. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 58 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 48 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a4d4afe6b4fc..b6e797d1c218 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5511,24 +5511,62 @@ static struct snd_pci_quirk stac9872_cfg_tbl[] = { {} }; +static struct snd_kcontrol_new stac9872_mixer[] = { + HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT), + STAC_INPUT_SOURCE(1), + { } /* end */ +}; + +static hda_nid_t stac9872_pin_nids[] = { + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x11, 0x13, 0x14, +}; + +static hda_nid_t stac9872_adc_nids[] = { + 0x8 /*,0x6*/ +}; + +static hda_nid_t stac9872_mux_nids[] = { + 0x15 +}; + static int patch_stac9872(struct hda_codec *codec) { struct sigmatel_spec *spec; - int board_config; - board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS, - stac9872_models, - stac9872_cfg_tbl); - if (board_config < 0) - /* unknown config, let generic-parser do its job... */ - return snd_hda_parse_generic_codec(codec); - spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; - codec->spec = spec; - switch (board_config) { + + spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS, + stac9872_models, + stac9872_cfg_tbl); + if (spec->board_config < 0) { + int err; + + spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); + spec->pin_nids = stac9872_pin_nids; + spec->multiout.dac_nids = spec->dac_nids; + spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids); + spec->adc_nids = stac9872_adc_nids; + spec->num_muxes = ARRAY_SIZE(stac9872_mux_nids); + spec->mux_nids = stac9872_mux_nids; + spec->mixer = stac9872_mixer; + spec->init = vaio_init; + + err = stac92xx_parse_auto_config(codec, 0x10, 0x12); + if (err < 0) { + stac92xx_free(codec); + return -EINVAL; + } + spec->input_mux = &spec->private_imux; + codec->patch_ops = stac92xx_patch_ops; + return 0; + } + + switch (spec->board_config) { case CXD9872RD_VAIO: case STAC9872AK_VAIO: case STAC9872K_VAIO: -- cgit v1.2.3 From 41b5b01afb71226653282951965d5efa9d7b843d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 18:21:23 +0100 Subject: ALSA: hda - Don't break the PCM creation loop Don't break the loop in snd_hda_codec_build_pcms() even if the item has no substreams. It's possible that it's an empty item and the next item containing the valid substreams (e.g. realtek codecs may create the analog and alt-analog but no digitl streams). Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 2d6f72ca0140..0129e95672ae 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2613,7 +2613,7 @@ int snd_hda_codec_build_pcms(struct hda_codec *codec) int dev; if (!cpcm->stream[0].substreams && !cpcm->stream[1].substreams) - return 0; /* no substreams assigned */ + continue; /* no substreams assigned */ if (!cpcm->pcm) { dev = get_empty_pcm_device(codec->bus, cpcm->pcm_type); -- cgit v1.2.3 From 2297bd6e526ce1469279284ffda9140f8d60ea84 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 18:24:13 +0100 Subject: ALSA: hda - Check HDMI jack types in the auto configuration Add dig_out_type and dig_in_type fields to autocfg struct. A proper HDA_PCM_TYPE_* value is assigned to these fields according to the pin-jack location type value. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 8 ++++++++ sound/pci/hda/hda_local.h | 2 ++ 2 files changed, 10 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 0129e95672ae..dd419ce43d92 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3392,10 +3392,18 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, case AC_JACK_SPDIF_OUT: case AC_JACK_DIG_OTHER_OUT: cfg->dig_out_pin = nid; + if (loc == AC_JACK_LOC_HDMI) + cfg->dig_out_type = HDA_PCM_TYPE_HDMI; + else + cfg->dig_out_type = HDA_PCM_TYPE_SPDIF; break; case AC_JACK_SPDIF_IN: case AC_JACK_DIG_OTHER_IN: cfg->dig_in_pin = nid; + if (loc == AC_JACK_LOC_HDMI) + cfg->dig_in_type = HDA_PCM_TYPE_HDMI; + else + cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; break; } } diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 1dd8716c387f..a4ecd77a451a 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -355,6 +355,8 @@ struct auto_pin_cfg { hda_nid_t dig_out_pin; hda_nid_t dig_in_pin; hda_nid_t mono_out_pin; + int dig_out_type; /* HDA_PCM_TYPE_XXX */ + int dig_in_type; /* HDA_PCM_TYPE_XXX */ }; #define get_defcfg_connect(cfg) \ -- cgit v1.2.3 From 8c441982fdc00f77b7aa609061c6411f47bcceda Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 18:30:20 +0100 Subject: ALSA: hda - Assign proper digital I/O type for STAC/IDT Assign the proper PCM digital I/O type (HDA_PCM_TYPE_*) for the digital I/O on STAC/IDT codecs. HDA_PCM_TYPE_HDMI is assigned for the HDMI I/O. A similar framework is implemented to patch_realtek.c, but it's not set up and still using only HDA_PCM_TYPE_SPDIF yet. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 +++++- sound/pci/hda/patch_sigmatel.c | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5d249a547fbf..4fdae06162ed 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -269,6 +269,7 @@ struct alc_spec { * dig_out_nid and hp_nid are optional */ hda_nid_t alt_dac_nid; + int dig_out_type; /* capture */ unsigned int num_adc_nids; @@ -3087,7 +3088,10 @@ static int alc_build_pcms(struct hda_codec *codec) codec->num_pcms = 2; info = spec->pcm_rec + 1; info->name = spec->stream_name_digital; - info->pcm_type = HDA_PCM_TYPE_SPDIF; + if (spec->dig_out_type) + info->pcm_type = spec->dig_out_type; + else + info->pcm_type = HDA_PCM_TYPE_SPDIF; if (spec->multiout.dig_out_nid && spec->stream_digital_playback) { info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback); diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b6e797d1c218..1dd448e85bc1 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2553,7 +2553,7 @@ static int stac92xx_build_pcms(struct hda_codec *codec) codec->num_pcms++; info++; info->name = "STAC92xx Digital"; - info->pcm_type = HDA_PCM_TYPE_SPDIF; + info->pcm_type = spec->autocfg.dig_out_type; if (spec->multiout.dig_out_nid) { info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_digital_playback; info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid; -- cgit v1.2.3 From e64f14f4e570d6ec5bc88abac92a3a27150756d7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Jan 2009 18:32:55 +0100 Subject: ALSA: hda - Allow digital-only I/O on ALC262 codec Some laptops like VAIO have multiple codecs and uses ALC262 only for the SPIDF output without analog I/O. So far, the codec-parser assumes the presence of analog I/O and returned an error for such a case. This patch adds some hacks to allow the digital-only configuration for ALC262. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 43 +++++++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4fdae06162ed..4cfa78c54398 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -306,6 +306,9 @@ struct alc_spec { unsigned int jack_present: 1; unsigned int master_sw: 1; + /* other flags */ + unsigned int no_analog :1; /* digital I/O only */ + /* for virtual master */ hda_nid_t vmaster_nid; #ifdef CONFIG_SND_HDA_POWER_SAVE @@ -2019,11 +2022,13 @@ static int alc_build_controls(struct hda_codec *codec) spec->multiout.dig_out_nid); if (err < 0) return err; - err = snd_hda_create_spdif_share_sw(codec, - &spec->multiout); - if (err < 0) - return err; - spec->multiout.share_spdif = 1; + if (!spec->no_analog) { + err = snd_hda_create_spdif_share_sw(codec, + &spec->multiout); + if (err < 0) + return err; + spec->multiout.share_spdif = 1; + } } if (spec->dig_in_nid) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid); @@ -2032,7 +2037,8 @@ static int alc_build_controls(struct hda_codec *codec) } /* if we have no master control, let's create it */ - if (!snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) { + if (!spec->no_analog && + !snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) { unsigned int vmaster_tlv[4]; snd_hda_set_vmaster_tlv(codec, spec->vmaster_nid, HDA_OUTPUT, vmaster_tlv); @@ -2041,7 +2047,8 @@ static int alc_build_controls(struct hda_codec *codec) if (err < 0) return err; } - if (!snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) { + if (!spec->no_analog && + !snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) { err = snd_hda_add_vmaster(codec, "Master Playback Switch", NULL, alc_slave_sws); if (err < 0) @@ -3060,6 +3067,9 @@ static int alc_build_pcms(struct hda_codec *codec) codec->num_pcms = 1; codec->pcm_info = info; + if (spec->no_analog) + goto skip_analog; + info->name = spec->stream_name_analog; if (spec->stream_analog_playback) { if (snd_BUG_ON(!spec->multiout.dac_nids)) @@ -3083,6 +3093,7 @@ static int alc_build_pcms(struct hda_codec *codec) } } + skip_analog: /* SPDIF for stream index #1 */ if (spec->multiout.dig_out_nid || spec->dig_in_nid) { codec->num_pcms = 2; @@ -3106,6 +3117,9 @@ static int alc_build_pcms(struct hda_codec *codec) codec->spdif_status_reset = 1; } + if (spec->no_analog) + return 0; + /* If the use of more than one ADC is requested for the current * model, configure a second analog capture-only PCM. */ @@ -10468,8 +10482,14 @@ static int alc262_parse_auto_config(struct hda_codec *codec) alc262_ignore); if (err < 0) return err; - if (!spec->autocfg.line_outs) + if (!spec->autocfg.line_outs) { + if (spec->autocfg.dig_out_pin || spec->autocfg.dig_in_pin) { + spec->multiout.max_channels = 2; + spec->no_analog = 1; + goto dig_only; + } return 0; /* can't find valid BIOS pin config */ + } err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg); if (err < 0) return err; @@ -10479,8 +10499,11 @@ static int alc262_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + dig_only: + if (spec->autocfg.dig_out_pin) { spec->multiout.dig_out_nid = ALC262_DIGOUT_NID; + spec->dig_out_type = spec->autocfg.dig_out_type; + } if (spec->autocfg.dig_in_pin) spec->dig_in_nid = ALC262_DIGIN_NID; @@ -10875,7 +10898,7 @@ static int patch_alc262(struct hda_codec *codec) spec->capsrc_nids = alc262_capsrc_nids; } } - if (!spec->cap_mixer) + if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); spec->vmaster_nid = 0x0c; -- cgit v1.2.3 From 75d91f9bc6d36b8d0ceef1cb75a4ac2b5c8a51d0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 19 Jan 2009 11:57:46 -0600 Subject: ASoC: Allow Freescale MPC8610 audio drivers to be compiled as modules Change the Kconfig and Makefile options for Freescale MPC8610 audio drivers so that they can be compiled as modules, and simplify the Kconfig choices so that only the platform is selected. Also fix the naming of the driver files to conform to ALSA standards. [Removed extraneous SND_SOC dependency -- broonie] Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/fsl/Kconfig | 16 ++++++++-------- sound/soc/fsl/Makefile | 7 +++++-- 2 files changed, 13 insertions(+), 10 deletions(-) diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 95c12b26fe37..c7c78c39cfed 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -1,17 +1,17 @@ config SND_SOC_OF_SIMPLE tristate +# ASoC platform support for the Freescale MPC8610 SOC. This compiles drivers +# for the SSI and the Elo DMA controller. You will still need to select +# a platform driver and a codec driver. config SND_SOC_MPC8610 - bool "ALSA SoC support for the MPC8610 SOC" - depends on MPC8610_HPCD - default y if MPC8610 - help - Say Y if you want to add support for codecs attached to the SSI - device on an MPC8610. + tristate + depends on MPC8610 config SND_SOC_MPC8610_HPCD - bool "ALSA SoC support for the Freescale MPC8610 HPCD board" - depends on SND_SOC_MPC8610 + tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" + depends on MPC8610_HPCD + select SND_SOC_MPC8610 select SND_SOC_CS4270 select SND_SOC_CS4270_VD33_ERRATA default y if MPC8610_HPCD diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 035da4afec34..f85134c86387 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -2,10 +2,13 @@ obj-$(CONFIG_SND_SOC_OF_SIMPLE) += soc-of-simple.o # MPC8610 HPCD Machine Support -obj-$(CONFIG_SND_SOC_MPC8610_HPCD) += mpc8610_hpcd.o +snd-soc-mpc8610-hpcd-objs := mpc8610_hpcd.o +obj-$(CONFIG_SND_SOC_MPC8610_HPCD) += snd-soc-mpc8610-hpcd.o # MPC8610 Platform Support -obj-$(CONFIG_SND_SOC_MPC8610) += fsl_ssi.o fsl_dma.o +snd-soc-fsl-ssi-objs := fsl_ssi.o +snd-soc-fsl-dma-objs := fsl_dma.o +obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o -- cgit v1.2.3 From 927b0aea93bb324d743e575659e10d6d76818e4b Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Mon, 19 Jan 2009 17:23:11 +0000 Subject: ASoC: Fix WM9705 capture switch name This patch fixes the acpture switch name so that it better reflects its purpose. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- sound/soc/codecs/wm9705.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index cb26b6a77ffb..5e1937ac0b5e 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -57,8 +57,8 @@ static const struct snd_kcontrol_new wm9705_snd_ac97_controls[] = { SOC_DOUBLE("CD Playback Volume", AC97_CD, 8, 0, 31, 1), SOC_SINGLE("Mic Playback Volume", AC97_MIC, 0, 31, 1), SOC_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 6, 1, 0), - SOC_DOUBLE("PCM Capture Volume", AC97_REC_GAIN, 8, 0, 15, 0), - SOC_SINGLE("PCM Capture Switch", AC97_REC_GAIN, 15, 1, 1), + SOC_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 15, 0), + SOC_SINGLE("Capture Switch", AC97_REC_GAIN, 15, 1, 1), }; static const char *wm9705_mic[] = {"Mic 1", "Mic 2"}; -- cgit v1.2.3 From 1e137f929bb490ff615ea475ac3904d58b0cdd5e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 21 Jan 2009 07:41:22 +0100 Subject: ALSA: hda - Clean up old VAIO hack codes for STAC9872 Get rid of old VAIO static hack codes for STAC9872 and use the BIOS auto-parser for all models. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 238 ++++------------------------------------- 1 file changed, 21 insertions(+), 217 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 775f8581906e..dbe8b1201eff 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5351,172 +5351,12 @@ static int patch_stac9205(struct hda_codec *codec) * STAC9872 hack */ -/* static config for Sony VAIO FE550G and Sony VAIO AR */ -static hda_nid_t vaio_dacs[] = { 0x2 }; -#define VAIO_HP_DAC 0x5 -static hda_nid_t vaio_adcs[] = { 0x8 /*,0x6*/ }; -static hda_nid_t vaio_mux_nids[] = { 0x15 }; - -static struct hda_input_mux vaio_mux = { - .num_items = 3, - .items = { - /* { "HP", 0x0 }, */ - { "Mic Jack", 0x1 }, - { "Internal Mic", 0x2 }, - { "PCM", 0x3 }, - } -}; - -static struct hda_verb vaio_init[] = { - {0x0a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* HP <- 0x2 */ - {0x0a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | STAC_HP_EVENT}, - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Speaker <- 0x5 */ - {0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? (<- 0x2) */ - {0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* CD */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? */ - {0x15, AC_VERB_SET_CONNECT_SEL, 0x1}, /* mic-sel: 0a,0d,14,02 */ - {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* HP */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Speaker */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* capture sw/vol -> 0x8 */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* CD-in -> 0x6 */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic-in -> 0x9 */ - {} -}; - -static struct hda_verb vaio_ar_init[] = { - {0x0a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* HP <- 0x2 */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Speaker <- 0x5 */ - {0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? (<- 0x2) */ - {0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* CD */ -/* {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },*/ /* Optical Out */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? */ +static struct hda_verb stac9872_core_init[] = { {0x15, AC_VERB_SET_CONNECT_SEL, 0x1}, /* mic-sel: 0a,0d,14,02 */ - {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* HP */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Speaker */ -/* {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},*/ /* Optical Out */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* capture sw/vol -> 0x8 */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* CD-in -> 0x6 */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic-in -> 0x9 */ {} }; -static struct snd_kcontrol_new vaio_mixer[] = { - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x02, 0, HDA_OUTPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x02, 0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Speaker Playback Volume", 0x05, 0, HDA_OUTPUT), - HDA_CODEC_MUTE("Speaker Playback Switch", 0x05, 0, HDA_OUTPUT), - /* HDA_CODEC_VOLUME("CD Capture Volume", 0x07, 0, HDA_INPUT), */ - HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .count = 1, - .info = stac92xx_mux_enum_info, - .get = stac92xx_mux_enum_get, - .put = stac92xx_mux_enum_put, - }, - {} -}; - -static struct snd_kcontrol_new vaio_ar_mixer[] = { - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x02, 0, HDA_OUTPUT), - HDA_CODEC_MUTE("Headphone Playback Switch", 0x02, 0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Speaker Playback Volume", 0x05, 0, HDA_OUTPUT), - HDA_CODEC_MUTE("Speaker Playback Switch", 0x05, 0, HDA_OUTPUT), - /* HDA_CODEC_VOLUME("CD Capture Volume", 0x07, 0, HDA_INPUT), */ - HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT), - HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT), - /*HDA_CODEC_MUTE("Optical Out Switch", 0x10, 0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Optical Out Volume", 0x10, 0, HDA_OUTPUT),*/ - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .count = 1, - .info = stac92xx_mux_enum_info, - .get = stac92xx_mux_enum_get, - .put = stac92xx_mux_enum_put, - }, - {} -}; - -static struct hda_codec_ops stac9872_patch_ops = { - .build_controls = stac92xx_build_controls, - .build_pcms = stac92xx_build_pcms, - .init = stac92xx_init, - .free = stac92xx_free, -#ifdef SND_HDA_NEEDS_RESUME - .resume = stac92xx_resume, -#endif -}; - -static int stac9872_vaio_init(struct hda_codec *codec) -{ - int err; - - err = stac92xx_init(codec); - if (err < 0) - return err; - if (codec->patch_ops.unsol_event) - codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26); - return 0; -} - -static void stac9872_vaio_hp_detect(struct hda_codec *codec, unsigned int res) -{ - if (get_pin_presence(codec, 0x0a)) { - stac92xx_reset_pinctl(codec, 0x0f, AC_PINCTL_OUT_EN); - stac92xx_set_pinctl(codec, 0x0a, AC_PINCTL_OUT_EN); - } else { - stac92xx_reset_pinctl(codec, 0x0a, AC_PINCTL_OUT_EN); - stac92xx_set_pinctl(codec, 0x0f, AC_PINCTL_OUT_EN); - } -} - -static void stac9872_vaio_unsol_event(struct hda_codec *codec, unsigned int res) -{ - switch (res >> 26) { - case STAC_HP_EVENT: - stac9872_vaio_hp_detect(codec, res); - break; - } -} - -static struct hda_codec_ops stac9872_vaio_patch_ops = { - .build_controls = stac92xx_build_controls, - .build_pcms = stac92xx_build_pcms, - .init = stac9872_vaio_init, - .free = stac92xx_free, - .unsol_event = stac9872_vaio_unsol_event, -#ifdef CONFIG_PM - .resume = stac92xx_resume, -#endif -}; - -enum { /* FE and SZ series. id=0x83847661 and subsys=0x104D0700 or 104D1000. */ - CXD9872RD_VAIO, - /* Unknown. id=0x83847662 and subsys=0x104D1200 or 104D1000. */ - STAC9872AK_VAIO, - /* Unknown. id=0x83847661 and subsys=0x104D1200. */ - STAC9872K_VAIO, - /* AR Series. id=0x83847664 and subsys=104D1300 */ - CXD9872AKD_VAIO, - STAC_9872_MODELS, -}; - -static const char *stac9872_models[STAC_9872_MODELS] = { - [CXD9872RD_VAIO] = "vaio", - [CXD9872AKD_VAIO] = "vaio-ar", -}; - -static struct snd_pci_quirk stac9872_cfg_tbl[] = { - SND_PCI_QUIRK(0x104d, 0x81e6, "Sony VAIO F/S", CXD9872RD_VAIO), - SND_PCI_QUIRK(0x104d, 0x81ef, "Sony VAIO F/S", CXD9872RD_VAIO), - SND_PCI_QUIRK(0x104d, 0x81fd, "Sony VAIO AR", CXD9872AKD_VAIO), - SND_PCI_QUIRK(0x104d, 0x8205, "Sony VAIO AR", CXD9872AKD_VAIO), - {} -}; - static struct snd_kcontrol_new stac9872_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT), @@ -5540,72 +5380,36 @@ static hda_nid_t stac9872_mux_nids[] = { static int patch_stac9872(struct hda_codec *codec) { struct sigmatel_spec *spec; + int err; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; +#if 0 /* no model right now */ spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS, stac9872_models, stac9872_cfg_tbl); - if (spec->board_config < 0) { - int err; - - spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); - spec->pin_nids = stac9872_pin_nids; - spec->multiout.dac_nids = spec->dac_nids; - spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids); - spec->adc_nids = stac9872_adc_nids; - spec->num_muxes = ARRAY_SIZE(stac9872_mux_nids); - spec->mux_nids = stac9872_mux_nids; - spec->mixer = stac9872_mixer; - spec->init = vaio_init; - - err = stac92xx_parse_auto_config(codec, 0x10, 0x12); - if (err < 0) { - stac92xx_free(codec); - return -EINVAL; - } - spec->input_mux = &spec->private_imux; - codec->patch_ops = stac92xx_patch_ops; - return 0; - } - - switch (spec->board_config) { - case CXD9872RD_VAIO: - case STAC9872AK_VAIO: - case STAC9872K_VAIO: - spec->mixer = vaio_mixer; - spec->init = vaio_init; - spec->multiout.max_channels = 2; - spec->multiout.num_dacs = ARRAY_SIZE(vaio_dacs); - spec->multiout.dac_nids = vaio_dacs; - spec->multiout.hp_nid = VAIO_HP_DAC; - spec->num_adcs = ARRAY_SIZE(vaio_adcs); - spec->adc_nids = vaio_adcs; - spec->num_pwrs = 0; - spec->input_mux = &vaio_mux; - spec->mux_nids = vaio_mux_nids; - codec->patch_ops = stac9872_vaio_patch_ops; - break; - - case CXD9872AKD_VAIO: - spec->mixer = vaio_ar_mixer; - spec->init = vaio_ar_init; - spec->multiout.max_channels = 2; - spec->multiout.num_dacs = ARRAY_SIZE(vaio_dacs); - spec->multiout.dac_nids = vaio_dacs; - spec->multiout.hp_nid = VAIO_HP_DAC; - spec->num_adcs = ARRAY_SIZE(vaio_adcs); - spec->num_pwrs = 0; - spec->adc_nids = vaio_adcs; - spec->input_mux = &vaio_mux; - spec->mux_nids = vaio_mux_nids; - codec->patch_ops = stac9872_patch_ops; - break; - } +#endif + spec->num_pins = ARRAY_SIZE(stac9872_pin_nids); + spec->pin_nids = stac9872_pin_nids; + spec->multiout.dac_nids = spec->dac_nids; + spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids); + spec->adc_nids = stac9872_adc_nids; + spec->num_muxes = ARRAY_SIZE(stac9872_mux_nids); + spec->mux_nids = stac9872_mux_nids; + spec->mixer = stac9872_mixer; + spec->init = stac9872_core_init; + + err = stac92xx_parse_auto_config(codec, 0x10, 0x12); + if (err < 0) { + stac92xx_free(codec); + return -EINVAL; + } + spec->input_mux = &spec->private_imux; + codec->patch_ops = stac92xx_patch_ops; return 0; } -- cgit v1.2.3 From 08989930f91e4802b94e03eb54e5385bac112811 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 21 Jan 2009 07:43:23 +0100 Subject: ALSA: hda - Remove old models for STAC9872 from the document Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 64eb1100eec1..75914bcdce72 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -352,5 +352,4 @@ STAC92HD83* STAC9872 ======== - vaio Setup for VAIO FE550G/SZ110 - vaio-ar Setup for VAIO AR + N/A -- cgit v1.2.3 From 48972cc5101dee24243c1b53d409cc27880e7a29 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 21 Jan 2009 08:18:16 +0100 Subject: ALSA: cmi8330: add OPL3 support Add OPL3 handling to the driver and volume control for FM synthesis. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 1 + sound/isa/cmi8330.c | 30 ++++++++++++++++++++++++++++-- 2 files changed, 29 insertions(+), 2 deletions(-) diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index ce0aa044e274..be2d377ff90a 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -94,6 +94,7 @@ config SND_CMI8330 tristate "C-Media CMI8330" select SND_WSS_LIB select SND_SB16_DSP + select SND_OPL3_LIB help Say Y here to include support for soundcards based on the C-Media CMI8330 chip. diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index e49aec700a55..dec6ea52cc4f 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -79,6 +80,7 @@ static int sbdma16[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; static long wssport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; static int wssirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; static int wssdma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; +static long fmport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard."); @@ -107,6 +109,8 @@ MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver."); module_param_array(wssdma, int, NULL, 0444); MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver."); +module_param_array(fmport, long, NULL, 0444); +MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver."); #ifdef CONFIG_PNP static int isa_registered; static int pnp_registered; @@ -219,8 +223,10 @@ WSS_SINGLE("3D Control - Switch", 0, CMI8330_RMUX3D, 5, 1, 1), WSS_SINGLE("PC Speaker Playback Volume", 0, CMI8330_OUTPUTVOL, 3, 3, 0), -WSS_SINGLE("FM Playback Switch", 0, - CMI8330_RECMUX, 3, 1, 1), +WSS_DOUBLE("FM Playback Switch", 0, + CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1), +WSS_DOUBLE("FM Playback Volume", 0, + CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1), WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", CAPTURE, SWITCH), 0, CMI8330_RMUX3D, 7, 1, 1), WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", PLAYBACK, SWITCH), 0, @@ -333,6 +339,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, wssport[dev] = pnp_port_start(pdev, 0); wssdma[dev] = pnp_dma(pdev, 0); wssirq[dev] = pnp_irq(pdev, 0); + fmport[dev] = pnp_port_start(pdev, 1); /* allocate SB16 resources */ pdev = acard->play; @@ -487,6 +494,7 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) { struct snd_cmi8330 *acard; int i, err; + struct snd_opl3 *opl3; acard = card->private_data; err = snd_wss_create(card, wssport[dev] + 4, -1, @@ -530,6 +538,24 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) snd_printk(KERN_ERR PFX "failed to create pcms\n"); return err; } + if (fmport[dev] != SNDRV_AUTO_PORT) { + if (snd_opl3_create(card, + fmport[dev], fmport[dev] + 2, + OPL3_HW_AUTO, 0, &opl3) < 0) { + snd_printk(KERN_ERR PFX + "no OPL device at 0x%lx-0x%lx ?\n", + fmport[dev], fmport[dev] + 2); + } else { + err = snd_opl3_timer_new(opl3, 0, 1); + if (err < 0) + return err; + + err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); + if (err < 0) + return err; + } + } + strcpy(card->driver, "CMI8330/C3D"); strcpy(card->shortname, "C-Media CMI8330/C3D"); -- cgit v1.2.3 From c9864fd30a28aceef5293f28559c4a2f5a20d7d5 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 21 Jan 2009 08:19:27 +0100 Subject: ALSA: sscape: use common MPU401 macros Remove local macros which redefines the common ones. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 6a7f842b9627..681e2237acb7 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -89,9 +89,6 @@ MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); #endif -#define MPU401_IO(i) ((i) + 0) -#define MIDI_DATA_IO(i) ((i) + 0) -#define MIDI_CTRL_IO(i) ((i) + 1) #define HOST_CTRL_IO(i) ((i) + 2) #define HOST_DATA_IO(i) ((i) + 3) #define ODIE_ADDR_IO(i) ((i) + 4) @@ -327,7 +324,7 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, */ static inline int verify_mpu401(const struct snd_mpu401 * mpu) { - return ((inb(MIDI_CTRL_IO(mpu->port)) & 0xc0) == 0x80); + return ((inb(MPU401C(mpu)) & 0xc0) == 0x80); } /* @@ -335,7 +332,7 @@ static inline int verify_mpu401(const struct snd_mpu401 * mpu) */ static inline void initialise_mpu401(const struct snd_mpu401 * mpu) { - outb(0, MIDI_DATA_IO(mpu->port)); + outb(0, MPU401D(mpu)); } /* @@ -1191,12 +1188,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, - MPU401_IO(xport), mpu_irq[dev]); + err = create_mpu401(card, MIDI_DEVNUM, xport, mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " "MPU-401 device at 0x%x\n", - MPU401_IO(xport)); + xport); goto _release_dma; } -- cgit v1.2.3 From 80c509fdd74f3b158267374cc55156965c8bf930 Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Tue, 20 Jan 2009 23:05:27 -0800 Subject: ASoC: Complete Beagleboard support Commit dc06102a0c8b5aa0dd7f9a40ce241e793c252a87 in the asoc tree did not include the necessary Kconfig and Makefile changes. This patch completes the support for Beagleboard Signed-off-by: Steve Sakoman Acked-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/omap/Kconfig | 10 ++++++++++ sound/soc/omap/Makefile | 2 ++ 2 files changed, 12 insertions(+) diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 4f7f04014585..ccd8973683db 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -55,3 +55,13 @@ config SND_OMAP_SOC_OMAP3_PANDORA select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on the OMAP3 Pandora. + +config SND_OMAP_SOC_OMAP3_BEAGLE + tristate "SoC Audio support for OMAP3 Beagle" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_BEAGLE + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the Beagleboard. + + diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 76fedd96e365..0c9e4ac37660 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -12,6 +12,7 @@ snd-soc-overo-objs := overo.o snd-soc-omap2evm-objs := omap2evm.o snd-soc-sdp3430-objs := sdp3430.o snd-soc-omap3pandora-objs := omap3pandora.o +snd-soc-omap3beagle-objs := omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o @@ -19,3 +20,4 @@ obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o -- cgit v1.2.3 From aa9c293ae46d71f5add0761bce8db67b162e3f29 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 21 Jan 2009 15:08:03 +0100 Subject: ALSA: do not create OPL3 timers if there is no OPL3 irq wired Most cards have OPL3 FM synthetiser but they do not have OPL3 interrupt wired to a sound chip or CPU. Do not create OPL3 timers for such cards as the timers are useless witthout interrupt. This patch removes OPL3 timers for following alsa drivers: snd-ad1816a, snd-opti93x, snd-opti92x, snd-sc6000, snd-cmi8330. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/ad1816a/ad1816a.c | 7 ++----- sound/isa/cmi8330.c | 4 ---- sound/isa/opti9xx/opti92x-ad1848.c | 10 ++-------- sound/isa/sc6000.c | 4 ---- 4 files changed, 4 insertions(+), 21 deletions(-) diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c index 77524244a846..3810833d3a87 100644 --- a/sound/isa/ad1816a/ad1816a.c +++ b/sound/isa/ad1816a/ad1816a.c @@ -207,11 +207,8 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard OPL3_HW_AUTO, 0, &opl3) < 0) { printk(KERN_ERR PFX "no OPL device at 0x%lx-0x%lx.\n", fm_port[dev], fm_port[dev] + 2); } else { - if ((error = snd_opl3_timer_new(opl3, 1, 2)) < 0) { - snd_card_free(card); - return error; - } - if ((error = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { + error = snd_opl3_hwdep_new(opl3, 0, 1, NULL); + if (error < 0) { snd_card_free(card); return error; } diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index dec6ea52cc4f..115437957413 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -546,10 +546,6 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) "no OPL device at 0x%lx-0x%lx ?\n", fmport[dev], fmport[dev] + 2); } else { - err = snd_opl3_timer_new(opl3, 0, 1); - if (err < 0) - return err; - err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); if (err < 0) return err; diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 19706b0d8497..5deb7e69a029 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -815,14 +815,8 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) chip->fm_port, chip->fm_port + 4 - 1); } if (opl3) { -#ifdef CS4231 - const int t1dev = 1; -#else - const int t1dev = 0; -#endif - if ((error = snd_opl3_timer_new(opl3, t1dev, t1dev+1)) < 0) - return error; - if ((error = snd_opl3_hwdep_new(opl3, 0, 1, &synth)) < 0) + error = snd_opl3_hwdep_new(opl3, 0, 1, &synth); + if (error < 0) return error; } } diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index ca35924dc3b3..bbc53692e68d 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -576,10 +576,6 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev) snd_printk(KERN_ERR PFX "no OPL device at 0x%x-0x%x ?\n", 0x388, 0x388 + 2); } else { - err = snd_opl3_timer_new(opl3, 0, 1); - if (err < 0) - goto err_unmap2; - err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); if (err < 0) goto err_unmap2; -- cgit v1.2.3 From a17ac45a5da76f851faf0b6502f66c1205159469 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 21 Jan 2009 15:14:09 +0100 Subject: ALSA: ad1816a: enable hardware timer Enable hardware timer with 10 usec resolution. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- include/sound/ad1816a.h | 2 ++ sound/isa/ad1816a/ad1816a.c | 7 +++++++ sound/isa/ad1816a/ad1816a_lib.c | 5 ----- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h index b3aa62ee3c8d..d010858c33c2 100644 --- a/include/sound/ad1816a.h +++ b/include/sound/ad1816a.h @@ -169,5 +169,7 @@ extern int snd_ad1816a_create(struct snd_card *card, unsigned long port, extern int snd_ad1816a_pcm(struct snd_ad1816a *chip, int device, struct snd_pcm **rpcm); extern int snd_ad1816a_mixer(struct snd_ad1816a *chip); +extern int snd_ad1816a_timer(struct snd_ad1816a *chip, int device, + struct snd_timer **rtimer); #endif /* __SOUND_AD1816A_H */ diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c index 3810833d3a87..15f60107a11e 100644 --- a/sound/isa/ad1816a/ad1816a.c +++ b/sound/isa/ad1816a/ad1816a.c @@ -156,6 +156,7 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard struct snd_card_ad1816a *acard; struct snd_ad1816a *chip; struct snd_opl3 *opl3; + struct snd_timer *timer; if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct snd_card_ad1816a))) == NULL) @@ -194,6 +195,12 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard return error; } + error = snd_ad1816a_timer(chip, 0, &timer); + if (error < 0) { + snd_card_free(card); + return error; + } + if (mpu_port[dev] > 0) { if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED, diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c index 3bfca7c59baf..1c9e01ecac0b 100644 --- a/sound/isa/ad1816a/ad1816a_lib.c +++ b/sound/isa/ad1816a/ad1816a_lib.c @@ -377,7 +377,6 @@ static struct snd_pcm_hardware snd_ad1816a_capture = { .fifo_size = 0, }; -#if 0 /* not used now */ static int snd_ad1816a_timer_close(struct snd_timer *timer) { struct snd_ad1816a *chip = snd_timer_chip(timer); @@ -442,8 +441,6 @@ static struct snd_timer_hardware snd_ad1816a_timer_table = { .start = snd_ad1816a_timer_start, .stop = snd_ad1816a_timer_stop, }; -#endif /* not used now */ - static int snd_ad1816a_playback_open(struct snd_pcm_substream *substream) { @@ -687,7 +684,6 @@ int __devinit snd_ad1816a_pcm(struct snd_ad1816a *chip, int device, struct snd_p return 0; } -#if 0 /* not used now */ int __devinit snd_ad1816a_timer(struct snd_ad1816a *chip, int device, struct snd_timer **rtimer) { struct snd_timer *timer; @@ -709,7 +705,6 @@ int __devinit snd_ad1816a_timer(struct snd_ad1816a *chip, int device, struct snd *rtimer = timer; return 0; } -#endif /* not used now */ /* * -- cgit v1.2.3 From 8ce8419829998c91b33200894a0db5e1441d6952 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 22 Jan 2009 16:59:20 +0100 Subject: ALSA: hda - Avoid to set the pin control again if already set Check the present pin control bit and avoid the write if it's already set in patch_sigmatel.c. This will reduce the number of verb execs at jack plugging. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0fa6c593d1d3..11634a4478ea 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4126,7 +4126,9 @@ static void stac92xx_free(struct hda_codec *codec) static void stac92xx_set_pinctl(struct hda_codec *codec, hda_nid_t nid, unsigned int flag) { - unsigned int pin_ctl = snd_hda_codec_read(codec, nid, + unsigned int old_ctl, pin_ctl; + + pin_ctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00); if (pin_ctl & AC_PINCTL_IN_EN) { @@ -4140,14 +4142,17 @@ static void stac92xx_set_pinctl(struct hda_codec *codec, hda_nid_t nid, return; } + old_ctl = pin_ctl; /* if setting pin direction bits, clear the current direction bits first */ if (flag & (AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN)) pin_ctl &= ~(AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN); - snd_hda_codec_write_cache(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - pin_ctl | flag); + pin_ctl |= flag; + if (old_ctl != pin_ctl) + snd_hda_codec_write_cache(codec, nid, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, + pin_ctl); } static void stac92xx_reset_pinctl(struct hda_codec *codec, hda_nid_t nid, @@ -4155,9 +4160,10 @@ static void stac92xx_reset_pinctl(struct hda_codec *codec, hda_nid_t nid, { unsigned int pin_ctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00); - snd_hda_codec_write_cache(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - pin_ctl & ~flag); + if (pin_ctl & flag) + snd_hda_codec_write_cache(codec, nid, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, + pin_ctl & ~flag); } static int get_pin_presence(struct hda_codec *codec, hda_nid_t nid) -- cgit v1.2.3 From d9a4268ee92ba1a2355c892a3add1fa66856b510 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 22 Jan 2009 17:40:18 +0100 Subject: ALSA: hda - Add quirk for Gateway %1616 laptop Gateway T1616 laptop needs EAPD always on while the current STAC9205 code turns off per HP plug. Added a new model "eapd" to keep it on. Reference: Novell bnc#467597 https://bugzilla.novell.com/show_bug.cgi?id=467597 Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_sigmatel.c | 10 +++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 75914bcdce72..ef6b22e25412 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -285,6 +285,7 @@ STAC9205/9254 dell-m42 Dell (unknown) dell-m43 Dell Precision dell-m44 Dell Inspiron + eapd Keep EAPD on (e.g. Gateway T1616) STAC9220/9221 ============= diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3f85731055c0..ed2fa431b03f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -66,6 +66,7 @@ enum { STAC_9205_DELL_M42, STAC_9205_DELL_M43, STAC_9205_DELL_M44, + STAC_9205_EAPD, STAC_9205_MODELS }; @@ -2240,6 +2241,7 @@ static unsigned int *stac9205_brd_tbl[STAC_9205_MODELS] = { [STAC_9205_DELL_M42] = dell_9205_m42_pin_configs, [STAC_9205_DELL_M43] = dell_9205_m43_pin_configs, [STAC_9205_DELL_M44] = dell_9205_m44_pin_configs, + [STAC_9205_EAPD] = NULL, }; static const char *stac9205_models[STAC_9205_MODELS] = { @@ -2247,12 +2249,14 @@ static const char *stac9205_models[STAC_9205_MODELS] = { [STAC_9205_DELL_M42] = "dell-m42", [STAC_9205_DELL_M43] = "dell-m43", [STAC_9205_DELL_M44] = "dell-m44", + [STAC_9205_EAPD] = "eapd", }; static struct snd_pci_quirk stac9205_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_9205_REF), + /* Dell */ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f1, "unknown Dell", STAC_9205_DELL_M42), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f2, @@ -2283,6 +2287,8 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { "Dell Inspiron", STAC_9205_DELL_M44), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228, "Dell Vostro 1500", STAC_9205_DELL_M42), + /* Gateway */ + SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD), {} /* terminator */ }; @@ -5320,7 +5326,9 @@ static int patch_stac9205(struct hda_codec *codec) spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; - spec->eapd_switch = 1; + /* Turn on/off EAPD per HP plugging */ + if (spec->board_config != STAC_9205_EAPD) + spec->eapd_switch = 1; spec->multiout.dac_nids = spec->dac_nids; switch (spec->board_config){ -- cgit v1.2.3 From fd8757aed16470e088ecdad96ffd30f86c34424d Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Wed, 21 Jan 2009 17:45:12 -0500 Subject: Add PCI DFI vendor ID Add a define for DFI PCI vendor id. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d543365518ab..6b339766b7ad 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2106,6 +2106,8 @@ #define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c #define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274 +#define PCI_VENDOR_ID_DFI 0x15bd + #define PCI_VENDOR_ID_QUICKNET 0x15e2 #define PCI_DEVICE_ID_QUICKNET_XJ 0x0500 -- cgit v1.2.3 From 577aa2c195045599275b54356969ae19f34e7a66 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Thu, 22 Jan 2009 22:55:44 -0500 Subject: ALSA: hda: add reference board SND_PCI_QUIRK Add another LanParty reference board SND_PCI_QUIRK to quirk lists of all codec families. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 212d8c09a67b..3fbe22053b3f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1517,6 +1517,8 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_REF), /* Dell laptops have BIOS problem */ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01a8, "unknown Dell", STAC_9200_DELL_D21), @@ -1666,6 +1668,7 @@ static struct snd_pci_quirk stac925x_codec_id_cfg_tbl[] = { static struct snd_pci_quirk stac925x_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_REF), SND_PCI_QUIRK(0x8384, 0x7632, "Stac9202 Reference Board", STAC_REF), /* Default table for unknown ID */ @@ -1709,6 +1712,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD73XX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_92HD73XX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254, "Dell Studio 1535", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255, @@ -1753,6 +1758,8 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD83XXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_92HD83XXX_REF), {} /* terminator */ }; @@ -1802,6 +1809,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD71BXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2, "HP dv5", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, @@ -1992,6 +2001,8 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_D945_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_D945_REF), /* Intel 945G based systems */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0101, "Intel D945G", STAC_D945GTP3), @@ -2148,6 +2159,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_D965_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_D965_REF), /* Intel 946 based systems */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x3d01, "Intel D946", STAC_D965_3ST), SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xa301, "Intel D946", STAC_D965_3ST), @@ -2259,6 +2272,8 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_9205_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, + "DFI LanParty", STAC_9205_REF), /* Dell */ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f1, "unknown Dell", STAC_9205_DELL_M42), -- cgit v1.2.3 From 8056d47e77a0f7e3c99c114deab4859d31496075 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 09:09:43 +0100 Subject: ALSA: hda - Add model=ref for Intel board with STAC9221 An intel board (8086:0204) works only with model=ref. Reference: Novell bug #406529 https://bugzilla.novell.com/show_bug.cgi?id=406529 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3fbe22053b3f..4ee9f7fc7724 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2056,6 +2056,9 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = { "Intel D945P", STAC_D945GTP3), SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0707, "Intel D945P", STAC_D945GTP5), + /* other intel */ + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0204, + "Intel D945", STAC_D945_REF), /* other systems */ /* Apple Intel Mac (Mac Mini, MacBook, MacBook Pro...) */ SND_PCI_QUIRK(0x8384, 0x7680, -- cgit v1.2.3 From e3c75964666a27cec46d2cccf2d9806336becd48 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 11:57:22 +0100 Subject: ALSA: hda - Create "Input Source" control dynamically for STAC/IDT Instead of fixed kcontrol_new element, build "Input Source" controls dynamically. If the number of input-source items is 0 or 1, we don't need to create such a control. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 78 ++++++++++++++++++++++++++++-------------- 1 file changed, 53 insertions(+), 25 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b3c3a02a4222..80a4c288b319 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -958,16 +958,6 @@ static struct hda_verb stac9205_core_init[] = { .private_value = HDA_COMPOSE_AMP_VAL(nid, chs, idx, dir) \ } -#define STAC_INPUT_SOURCE(cnt) \ - { \ - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = "Input Source", \ - .count = cnt, \ - .info = stac92xx_mux_enum_info, \ - .get = stac92xx_mux_enum_get, \ - .put = stac92xx_mux_enum_put, \ - } - #define STAC_ANALOG_LOOPBACK(verb_read, verb_write, cnt) \ { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ @@ -982,7 +972,6 @@ static struct hda_verb stac9205_core_init[] = { static struct snd_kcontrol_new stac9200_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT), - STAC_INPUT_SOURCE(1), HDA_CODEC_VOLUME("Capture Volume", 0x0a, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x0a, 0, HDA_OUTPUT), { } /* end */ @@ -1098,7 +1087,6 @@ static struct snd_kcontrol_new stac92hd83xxx_mixer[] = { }; static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = { - STAC_INPUT_SOURCE(2), STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT), @@ -1127,7 +1115,6 @@ static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = { }; static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { - STAC_INPUT_SOURCE(2), STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT), @@ -1141,14 +1128,12 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { static struct snd_kcontrol_new stac925x_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT), - STAC_INPUT_SOURCE(1), HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT), { } /* end */ }; static struct snd_kcontrol_new stac9205_mixer[] = { - STAC_INPUT_SOURCE(2), STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0, 1), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT), @@ -1161,7 +1146,6 @@ static struct snd_kcontrol_new stac9205_mixer[] = { /* This needs to be generated dynamically based on sequence */ static struct snd_kcontrol_new stac922x_mixer[] = { - STAC_INPUT_SOURCE(2), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_INPUT), @@ -1172,7 +1156,6 @@ static struct snd_kcontrol_new stac922x_mixer[] = { static struct snd_kcontrol_new stac927x_mixer[] = { - STAC_INPUT_SOURCE(3), STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT), @@ -2777,22 +2760,37 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = { }; /* add dynamic controls */ -static int stac92xx_add_control_temp(struct sigmatel_spec *spec, - struct snd_kcontrol_new *ktemp, - int idx, const char *name, - unsigned long val) +static struct snd_kcontrol_new * +stac_control_new(struct sigmatel_spec *spec, + struct snd_kcontrol_new *ktemp, + const char *name) { struct snd_kcontrol_new *knew; snd_array_init(&spec->kctls, sizeof(*knew), 32); knew = snd_array_new(&spec->kctls); if (!knew) - return -ENOMEM; + return NULL; *knew = *ktemp; - knew->index = idx; knew->name = kstrdup(name, GFP_KERNEL); - if (!knew->name) + if (!knew->name) { + /* roolback */ + memset(knew, 0, sizeof(*knew)); + spec->kctls.alloced--; + return NULL; + } + return knew; +} + +static int stac92xx_add_control_temp(struct sigmatel_spec *spec, + struct snd_kcontrol_new *ktemp, + int idx, const char *name, + unsigned long val) +{ + struct snd_kcontrol_new *knew = stac_control_new(spec, ktemp, name); + if (!knew) return -ENOMEM; + knew->index = idx; knew->private_value = val; return 0; } @@ -2814,6 +2812,29 @@ static inline int stac92xx_add_control(struct sigmatel_spec *spec, int type, return stac92xx_add_control_idx(spec, type, 0, name, val); } +static struct snd_kcontrol_new stac_input_src_temp = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Input Source", + .info = stac92xx_mux_enum_info, + .get = stac92xx_mux_enum_get, + .put = stac92xx_mux_enum_put, +}; + +static int stac92xx_add_input_source(struct sigmatel_spec *spec) +{ + struct snd_kcontrol_new *knew; + struct hda_input_mux *imux = &spec->private_imux; + + if (!spec->num_adcs || imux->num_items <= 1) + return 0; /* no need for input source control */ + knew = stac_control_new(spec, &stac_input_src_temp, + stac_input_src_temp.name); + if (!knew) + return -ENOMEM; + knew->count = spec->num_adcs; + return 0; +} + /* check whether the line-input can be used as line-out */ static hda_nid_t check_line_out_switch(struct hda_codec *codec) { @@ -3699,6 +3720,10 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out return err; } + err = stac92xx_add_input_source(spec); + if (err < 0) + return err; + spec->multiout.max_channels = spec->multiout.num_dacs * 2; if (spec->multiout.max_channels > 2) spec->surr_switch = 1; @@ -3812,6 +3837,10 @@ static int stac9200_parse_auto_config(struct hda_codec *codec) return err; } + err = stac92xx_add_input_source(spec); + if (err < 0) + return err; + if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = 0x05; if (spec->autocfg.dig_in_pin) @@ -5426,7 +5455,6 @@ static struct hda_verb stac9872_core_init[] = { static struct snd_kcontrol_new stac9872_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT), - STAC_INPUT_SOURCE(1), { } /* end */ }; -- cgit v1.2.3 From ff637d38ea6b9c54f708a2b9edabc1b0c73c6d0a Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 22 Jan 2009 18:23:39 -0600 Subject: ASoC: remove stand-alone mode support from CS4270 codec driver The CS4270 supports stand-alone mode, where the codec is not connect to the I2C or SPI buses. Instead, input voltages configure the codec at power-on. The CS4270 ASoC device driver has partial support for this mode, but the code was never tested, and partial support doesn't help anyone. It also made the rest of the code more complicated than necessary. [Removed redundant CS4270 dependency on I2C -- broonie] Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 92 ++++++++++++++--------------------------------- sound/soc/fsl/Kconfig | 3 +- 2 files changed, 29 insertions(+), 66 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f1aa0c34421c..2e4ce04925e2 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -12,11 +12,7 @@ * * Current features/limitations: * - * 1) Software mode is supported. Stand-alone mode is automatically - * selected if I2C is disabled or if a CS4270 is not found on the I2C - * bus. However, stand-alone mode is only partially implemented because - * there is no mechanism yet for this driver and the machine driver to - * communicate the values of the M0, M1, MCLK1, and MCLK2 pins. + * 1) Software mode is supported. Stand-alone mode is not supported. * 2) Only I2C is supported, not SPI * 3) Only Master mode is supported, not Slave. * 4) The machine driver's 'startup' function must call @@ -33,14 +29,6 @@ #include #include -#include "cs4270.h" - -/* If I2C is defined, then we support software mode. However, if we're - not compiled as module but I2C is, then we can't use I2C calls. */ -#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) -#define USE_I2C -#endif - /* Private data for the CS4270 */ struct cs4270_private { unsigned int mclk; /* Input frequency of the MCLK pin */ @@ -60,8 +48,6 @@ struct cs4270_private { SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE) -#ifdef USE_I2C - /* CS4270 registers addresses */ #define CS4270_CHIPID 0x01 /* Chip ID */ #define CS4270_PWRCTL 0x02 /* Power Control */ @@ -271,17 +257,6 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, return ret; } -/* - * A list of addresses on which this CS4270 could use. I2C addresses are - * 7 bits. For the CS4270, the upper four bits are always 1001, and the - * lower three bits are determined via the AD2, AD1, and AD0 pins - * (respectively). - */ -static const unsigned short normal_i2c[] = { - 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, I2C_CLIENT_END -}; -I2C_CLIENT_INSMOD; - /* * Pre-fill the CS4270 register cache. * @@ -476,7 +451,6 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, } #ifdef CONFIG_SND_SOC_CS4270_HWMUTE - /* * Set the CS4270 external mute * @@ -501,32 +475,16 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute) return snd_soc_write(codec, CS4270_MUTE, reg6); } - +#else +#define cs4270_mute NULL #endif -static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *); - /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { SOC_DOUBLE_R("Master Playback Volume", CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1) }; -static const struct i2c_device_id cs4270_id[] = { - {"cs4270", 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, cs4270_id); - -static struct i2c_driver cs4270_i2c_driver = { - .driver = { - .name = "CS4270 I2C", - .owner = THIS_MODULE, - }, - .id_table = cs4270_id, - .probe = cs4270_i2c_probe, -}; - /* * Global variable to store socdev for i2c probe function. * @@ -633,7 +591,20 @@ error: return ret; } -#endif /* USE_I2C*/ +static const struct i2c_device_id cs4270_id[] = { + {"cs4270", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs4270_id); + +static struct i2c_driver cs4270_i2c_driver = { + .driver = { + .name = "cs4270", + .owner = THIS_MODULE, + }, + .id_table = cs4270_id, + .probe = cs4270_i2c_probe, +}; struct snd_soc_dai cs4270_dai = { .name = "CS4270", @@ -698,7 +669,6 @@ static int cs4270_probe(struct platform_device *pdev) goto error_free_codec; } -#ifdef USE_I2C cs4270_socdev = socdev; ret = i2c_add_driver(&cs4270_i2c_driver); @@ -708,20 +678,16 @@ static int cs4270_probe(struct platform_device *pdev) } /* Did we find a CS4270 on the I2C bus? */ - if (codec->control_data) { - /* Initialize codec ops */ - cs4270_dai.ops.hw_params = cs4270_hw_params; - cs4270_dai.ops.set_sysclk = cs4270_set_dai_sysclk; - cs4270_dai.ops.set_fmt = cs4270_set_dai_fmt; -#ifdef CONFIG_SND_SOC_CS4270_HWMUTE - cs4270_dai.ops.digital_mute = cs4270_mute; -#endif - } else - printk(KERN_INFO "cs4270: no I2C device found, " - "using stand-alone mode\n"); -#else - printk(KERN_INFO "cs4270: I2C disabled, using stand-alone mode\n"); -#endif + if (!codec->control_data) { + printk(KERN_ERR "cs4270: failed to attach driver"); + goto error_del_driver; + } + + /* Initialize codec ops */ + cs4270_dai.ops.hw_params = cs4270_hw_params; + cs4270_dai.ops.set_sysclk = cs4270_set_dai_sysclk; + cs4270_dai.ops.set_fmt = cs4270_set_dai_fmt; + cs4270_dai.ops.digital_mute = cs4270_mute; ret = snd_soc_init_card(socdev); if (ret < 0) { @@ -732,11 +698,9 @@ static int cs4270_probe(struct platform_device *pdev) return 0; error_del_driver: -#ifdef USE_I2C i2c_del_driver(&cs4270_i2c_driver); error_free_pcms: -#endif snd_soc_free_pcms(socdev); error_free_codec: @@ -752,9 +716,7 @@ static int cs4270_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); -#ifdef USE_I2C i2c_del_driver(&cs4270_i2c_driver); -#endif kfree(socdev->codec); socdev->codec = NULL; diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index c7c78c39cfed..9fc908283371 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -10,7 +10,8 @@ config SND_SOC_MPC8610 config SND_SOC_MPC8610_HPCD tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" - depends on MPC8610_HPCD + # I2C is necessary for the CS4270 driver + depends on MPC8610_HPCD && I2C select SND_SOC_MPC8610 select SND_SOC_CS4270 select SND_SOC_CS4270_VD33_ERRATA -- cgit v1.2.3 From c91cf25ebfbf3a5b336cbaa46646d37dd3d33127 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 11:23:32 +0000 Subject: ASoC: Fix merge with PXA tree Fix a merge issue caused by context overlap. Reported-by: Stephen Rothwell Signed-off-by: Mark Brown --- sound/soc/pxa/e800_wm9712.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c index 78a1770b986c..bc019cdce429 100644 --- a/sound/soc/pxa/e800_wm9712.c +++ b/sound/soc/pxa/e800_wm9712.c @@ -18,13 +18,10 @@ #include #include -#include -#include +#include #include #include -#include - #include "../codecs/wm9712.h" #include "pxa2xx-pcm.h" #include "pxa2xx-ac97.h" -- cgit v1.2.3 From 6d6e17de4f64131e9c976fd524d73aaec268178f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 12:33:54 +0100 Subject: ALSA: hda - Fix initial verbs for mic-boosts on AD1981HD The mic boosts (NID 0x08 and 0x18) are input-amps, not output-amps. Fix the initial verbs for them. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 2e7371ec2e23..9a902c2f05a2 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1407,8 +1407,8 @@ static struct hda_verb ad1981_init_verbs[] = { {0x1e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, {0x1f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, /* Mic boost: 0dB */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, - {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Record selector: Front mic */ {0x15, AC_VERB_SET_CONNECT_SEL, 0x0}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, -- cgit v1.2.3 From 19a2d3e9b99ffa264adf1138bd8d8aef8909dca9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 12:35:25 +0100 Subject: ALSA: hda - Remove invalid amp initializations for AD1988* codecs The ADC widgets on AD1988* codecs have no amp controls. Remove invalid initialization verbs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 9a902c2f05a2..52bc85dd6f54 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -2288,10 +2288,6 @@ static struct hda_verb ad1988_capture_init_verbs[] = { {0x0c, AC_VERB_SET_CONNECT_SEL, 0x1}, {0x0d, AC_VERB_SET_CONNECT_SEL, 0x1}, {0x0e, AC_VERB_SET_CONNECT_SEL, 0x1}, - /* ADCs; muted */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, { } }; @@ -2399,10 +2395,6 @@ static struct hda_verb ad1988_3stack_init_verbs[] = { {0x0c, AC_VERB_SET_CONNECT_SEL, 0x1}, {0x0d, AC_VERB_SET_CONNECT_SEL, 0x1}, {0x0e, AC_VERB_SET_CONNECT_SEL, 0x1}, - /* ADCs; muted */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Analog Mix output amp */ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x1f}, /* 0dB */ { } @@ -2474,10 +2466,6 @@ static struct hda_verb ad1988_laptop_init_verbs[] = { {0x0c, AC_VERB_SET_CONNECT_SEL, 0x1}, {0x0d, AC_VERB_SET_CONNECT_SEL, 0x1}, {0x0e, AC_VERB_SET_CONNECT_SEL, 0x1}, - /* ADCs; muted */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Analog Mix output amp */ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x1f}, /* 0dB */ { } -- cgit v1.2.3 From 60e388e89c9e258a51a0995ddd9e18fdebcdbe12 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 12:37:09 +0100 Subject: ALSA: hda - Fix invalid verbs for mic-boosts on AD1884* The mic-boosts (0x14 and 0x15) on AD1884* codecs are input-amps, not output-amps. Fix the invalid initialization verbs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 52bc85dd6f54..a7298d28a0d4 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3183,10 +3183,10 @@ static struct hda_verb ad1884_init_verbs[] = { {0x0e, AC_VERB_SET_CONNECT_SEL, 0x1}, /* Port-B (front mic) pin */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Port-C (rear mic) pin */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Analog mixer; mute as default */ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, @@ -3601,10 +3601,10 @@ static struct hda_verb ad1884a_init_verbs[] = { {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Port-B (front mic) pin */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Port-C (rear line-in) pin */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Port-E (rear mic) pin */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, -- cgit v1.2.3 From f6fca2e93c9ad3c704f02aaabe4359a8af16fbbb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 11:40:26 +0000 Subject: ASoC: Remove unneeded e7x0 inclusion of pxa-regs.h and hardware.h pxa-regs.h and hardware.h are not intended for use directly in driver code and references to them have been removed in other code - remove them from the newly added e740 and e750 machine drivers. Signed-off-by: Mark Brown --- sound/soc/pxa/e740_wm9705.c | 2 -- sound/soc/pxa/e750_wm9705.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index ac3617651734..7cd2f89d7b10 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -18,8 +18,6 @@ #include #include -#include -#include #include #include diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c index 20fbdcfa9f78..8dceccc5e059 100644 --- a/sound/soc/pxa/e750_wm9705.c +++ b/sound/soc/pxa/e750_wm9705.c @@ -18,8 +18,6 @@ #include #include -#include -#include #include #include -- cgit v1.2.3 From a435869cacbb581920df23411416bed533748bf1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 11:49:45 +0000 Subject: ASoC: Configure SSP port PLL for Zylonite Signed-off-by: Mark Brown --- sound/soc/pxa/zylonite.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c index 8541b679f6eb..ec2fb764b241 100644 --- a/sound/soc/pxa/zylonite.c +++ b/sound/soc/pxa/zylonite.c @@ -95,6 +95,7 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int pll_out = 0; unsigned int acds = 0; unsigned int wm9713_div = 0; int ret = 0; @@ -102,13 +103,16 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, switch (params_rate(params)) { case 8000: wm9713_div = 12; + pll_out = 2048000; break; case 16000: wm9713_div = 6; + pll_out = 4096000; break; case 48000: default: wm9713_div = 2; + pll_out = 12288000; acds = 1; break; } @@ -129,6 +133,10 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; + ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, pll_out); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_AUDIO_DIV_ACDS, acds); if (ret < 0) return ret; -- cgit v1.2.3 From 4cfb91c6d764b18e81bfb6e6779e07bcecbb197c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 12:53:09 +0100 Subject: ALSA: hda - Fix invalid amp init for ALC268 codec Fix some invalid AMP initializations for ALC268 codecs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4cfa78c54398..863ab957204b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11279,19 +11279,13 @@ static void alc267_quanta_il1_unsol_event(struct hda_codec *codec, static struct hda_verb alc268_base_init_verbs[] = { /* Unmute DAC0-1 and set vol = 0 */ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* * Set up output mixers (0x0c - 0x0e) */ /* set vol=0 to output mixers */ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, @@ -11310,9 +11304,7 @@ static struct hda_verb alc268_base_init_verbs[] = { {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* set PCBEEP vol = 0, mute connections */ {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, @@ -11334,10 +11326,8 @@ static struct hda_verb alc268_base_init_verbs[] = { */ static struct hda_verb alc268_volume_init_verbs[] = { /* set output DAC */ - {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, @@ -11345,16 +11335,12 @@ static struct hda_verb alc268_volume_init_verbs[] = { {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, - {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* set PCBEEP vol = 0, mute connections */ {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, -- cgit v1.2.3 From 70040c07402ef5a3fad2133daffb7ee61b0d4641 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 Jan 2009 14:18:11 +0100 Subject: ALSA: hda - Fix wrong initial verb for AD1984 thinkpad model The docking mic-boost (0x25) has no mute bit. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index a7298d28a0d4..e934e2c187d0 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3337,7 +3337,7 @@ static struct hda_verb ad1984_thinkpad_init_verbs[] = { {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* docking mic boost */ - {0x25, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x25, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* Analog mixer - docking mic; mute as default */ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* enable EAPD bit */ -- cgit v1.2.3 From 55aef4508598d59c2baea7e2a3e6dfed415bbfc0 Mon Sep 17 00:00:00 2001 From: Markus Bollinger Date: Fri, 23 Jan 2009 14:45:41 +0100 Subject: ALSA: pcxhr - add support for gpio ports and minor bug fix - add support for gpio ports (2 GPI, 2 GPO) of pcxhr stereo cards - minor bugfixes : allow setting clock to internal by the mixer even if there is no stream (but monitoring) Signed-off-by: Markus Bollinger Signed-off-by: Takashi Iwai --- sound/pci/pcxhr/pcxhr.c | 41 +++++++++++++++++++++++++++++++++++++++++ sound/pci/pcxhr/pcxhr.h | 5 +++-- sound/pci/pcxhr/pcxhr_mix22.c | 40 ++++++++++++++++++++++++++++++++++++---- sound/pci/pcxhr/pcxhr_mix22.h | 3 +++ sound/pci/pcxhr/pcxhr_mixer.c | 8 ++++++-- 5 files changed, 89 insertions(+), 8 deletions(-) diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index 27cf2c28d113..ca89106f8c5d 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -1334,6 +1334,40 @@ static void pcxhr_proc_sync(struct snd_info_entry *entry, snd_iprintf(buffer, "\n"); } +static void pcxhr_proc_gpio_read(struct snd_info_entry *entry, + struct snd_info_buffer *buffer) +{ + struct snd_pcxhr *chip = entry->private_data; + struct pcxhr_mgr *mgr = chip->mgr; + /* commands available when embedded DSP is running */ + if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_DSP_MAIN_INDEX)) { + /* gpio ports on stereo boards only available */ + int value = 0; + hr222_read_gpio(mgr, 1, &value); /* GPI */ + snd_iprintf(buffer, "GPI: 0x%x\n", value); + hr222_read_gpio(mgr, 0, &value); /* GP0 */ + snd_iprintf(buffer, "GPO: 0x%x\n", value); + } else + snd_iprintf(buffer, "no firmware loaded\n"); + snd_iprintf(buffer, "\n"); +} +static void pcxhr_proc_gpo_write(struct snd_info_entry *entry, + struct snd_info_buffer *buffer) +{ + struct snd_pcxhr *chip = entry->private_data; + struct pcxhr_mgr *mgr = chip->mgr; + char line[64]; + int value; + /* commands available when embedded DSP is running */ + if (!(mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_DSP_MAIN_INDEX))) + return; + while (!snd_info_get_line(buffer, line, sizeof(line))) { + if (sscanf(line, "GPO: 0x%x", &value) != 1) + continue; + hr222_write_gpo(mgr, value); /* GP0 */ + } +} + static void __devinit pcxhr_proc_init(struct snd_pcxhr *chip) { struct snd_info_entry *entry; @@ -1342,6 +1376,13 @@ static void __devinit pcxhr_proc_init(struct snd_pcxhr *chip) snd_info_set_text_ops(entry, chip, pcxhr_proc_info); if (! snd_card_proc_new(chip->card, "sync", &entry)) snd_info_set_text_ops(entry, chip, pcxhr_proc_sync); + /* gpio available on stereo sound cards only */ + if (chip->mgr->is_hr_stereo && + !snd_card_proc_new(chip->card, "gpio", &entry)) { + snd_info_set_text_ops(entry, chip, pcxhr_proc_gpio_read); + entry->c.text.write = pcxhr_proc_gpo_write; + entry->mode |= S_IWUSR; + } } /* end of proc interface */ diff --git a/sound/pci/pcxhr/pcxhr.h b/sound/pci/pcxhr/pcxhr.h index 84131a916c92..ac9c3b3bb4e8 100644 --- a/sound/pci/pcxhr/pcxhr.h +++ b/sound/pci/pcxhr/pcxhr.h @@ -27,8 +27,8 @@ #include #include -#define PCXHR_DRIVER_VERSION 0x000905 /* 0.9.5 */ -#define PCXHR_DRIVER_VERSION_STRING "0.9.5" /* 0.9.5 */ +#define PCXHR_DRIVER_VERSION 0x000906 /* 0.9.6 */ +#define PCXHR_DRIVER_VERSION_STRING "0.9.6" /* 0.9.6 */ #define PCXHR_MAX_CARDS 6 @@ -124,6 +124,7 @@ struct pcxhr_mgr { unsigned char xlx_cfg; /* copy of PCXHR_XLX_CFG register */ unsigned char xlx_selmic; /* copy of PCXHR_XLX_SELMIC register */ + unsigned char dsp_reset; /* copy of PCXHR_DSP_RESET register */ }; diff --git a/sound/pci/pcxhr/pcxhr_mix22.c b/sound/pci/pcxhr/pcxhr_mix22.c index ff019126b672..1cb82c0a9cb3 100644 --- a/sound/pci/pcxhr/pcxhr_mix22.c +++ b/sound/pci/pcxhr/pcxhr_mix22.c @@ -53,6 +53,8 @@ #define PCXHR_DSP_RESET_DSP 0x01 #define PCXHR_DSP_RESET_MUTE 0x02 #define PCXHR_DSP_RESET_CODEC 0x08 +#define PCXHR_DSP_RESET_GPO_OFFSET 5 +#define PCXHR_DSP_RESET_GPO_MASK 0x60 /* values for PCHR_XLX_CFG register */ #define PCXHR_CFG_SYNCDSP_MASK 0x80 @@ -81,6 +83,8 @@ /* values for PCHR_XLX_STATUS register - READ */ #define PCXHR_STAT_SRC_LOCK 0x01 #define PCXHR_STAT_LEVEL_IN 0x02 +#define PCXHR_STAT_GPI_OFFSET 2 +#define PCXHR_STAT_GPI_MASK 0x0C #define PCXHR_STAT_MIC_CAPS 0x10 /* values for PCHR_XLX_STATUS register - WRITE */ #define PCXHR_STAT_FREQ_SYNC_MASK 0x01 @@ -291,10 +295,11 @@ int hr222_sub_init(struct pcxhr_mgr *mgr) PCXHR_OUTPB(mgr, PCXHR_DSP_RESET, PCXHR_DSP_RESET_DSP); msleep(5); - PCXHR_OUTPB(mgr, PCXHR_DSP_RESET, - PCXHR_DSP_RESET_DSP | - PCXHR_DSP_RESET_MUTE | - PCXHR_DSP_RESET_CODEC); + mgr->dsp_reset = PCXHR_DSP_RESET_DSP | + PCXHR_DSP_RESET_MUTE | + PCXHR_DSP_RESET_CODEC; + PCXHR_OUTPB(mgr, PCXHR_DSP_RESET, mgr->dsp_reset); + /* hr222_write_gpo(mgr, 0); does the same */ msleep(5); /* config AKM */ @@ -496,6 +501,33 @@ int hr222_get_external_clock(struct pcxhr_mgr *mgr, } +int hr222_read_gpio(struct pcxhr_mgr *mgr, int is_gpi, int *value) +{ + if (is_gpi) { + unsigned char reg = PCXHR_INPB(mgr, PCXHR_XLX_STATUS); + *value = (int)(reg & PCXHR_STAT_GPI_MASK) >> + PCXHR_STAT_GPI_OFFSET; + } else { + *value = (int)(mgr->dsp_reset & PCXHR_DSP_RESET_GPO_MASK) >> + PCXHR_DSP_RESET_GPO_OFFSET; + } + return 0; +} + + +int hr222_write_gpo(struct pcxhr_mgr *mgr, int value) +{ + unsigned char reg = mgr->dsp_reset & ~PCXHR_DSP_RESET_GPO_MASK; + + reg |= (unsigned char)(value << PCXHR_DSP_RESET_GPO_OFFSET) & + PCXHR_DSP_RESET_GPO_MASK; + + PCXHR_OUTPB(mgr, PCXHR_DSP_RESET, reg); + mgr->dsp_reset = reg; + return 0; +} + + int hr222_update_analog_audio_level(struct snd_pcxhr *chip, int is_capture, int channel) { diff --git a/sound/pci/pcxhr/pcxhr_mix22.h b/sound/pci/pcxhr/pcxhr_mix22.h index 6b318b2f0100..5a37a0007e8f 100644 --- a/sound/pci/pcxhr/pcxhr_mix22.h +++ b/sound/pci/pcxhr/pcxhr_mix22.h @@ -32,6 +32,9 @@ int hr222_get_external_clock(struct pcxhr_mgr *mgr, enum pcxhr_clock_type clock_type, int *sample_rate); +int hr222_read_gpio(struct pcxhr_mgr *mgr, int is_gpi, int *value); +int hr222_write_gpo(struct pcxhr_mgr *mgr, int value); + #define HR222_LINE_PLAYBACK_LEVEL_MIN 0 /* -25.5 dB */ #define HR222_LINE_PLAYBACK_ZERO_LEVEL 51 /* 0.0 dB */ #define HR222_LINE_PLAYBACK_LEVEL_MAX 99 /* +24.0 dB */ diff --git a/sound/pci/pcxhr/pcxhr_mixer.c b/sound/pci/pcxhr/pcxhr_mixer.c index 2436e374586f..fec049344621 100644 --- a/sound/pci/pcxhr/pcxhr_mixer.c +++ b/sound/pci/pcxhr/pcxhr_mixer.c @@ -789,11 +789,15 @@ static int pcxhr_clock_type_put(struct snd_kcontrol *kcontrol, if (mgr->use_clock_type != ucontrol->value.enumerated.item[0]) { mutex_lock(&mgr->setup_mutex); mgr->use_clock_type = ucontrol->value.enumerated.item[0]; - if (mgr->use_clock_type) + rate = 0; + if (mgr->use_clock_type != PCXHR_CLOCK_TYPE_INTERNAL) { pcxhr_get_external_clock(mgr, mgr->use_clock_type, &rate); - else + } else { rate = mgr->sample_rate; + if (!rate) + rate = 48000; + } if (rate) { pcxhr_set_clock(mgr, rate); if (mgr->sample_rate) -- cgit v1.2.3 From ef963dcf6879e500e6559b4327f6cbdc4439198e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 14:53:58 +0000 Subject: ASoC: Fix spurious codec driver dependencies Kbuild ignores dependency from things that are themselves selected so ASoC machine drivers need to ensure that the control bus is being built. This also avoids issues where multiple buses are supported by a given codec. Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 4 ---- sound/soc/omap/Kconfig | 4 ++-- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index cb5fcd605acc..656f180b2c1f 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -91,7 +91,6 @@ config SND_SOC_SSM2602 config SND_SOC_TLV320AIC23 tristate - depends on I2C config SND_SOC_TLV320AIC26 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE @@ -99,15 +98,12 @@ config SND_SOC_TLV320AIC26 config SND_SOC_TLV320AIC3X tristate - depends on I2C config SND_SOC_TWL4030 tristate - depends on TWL4030_CORE config SND_SOC_UDA134X tristate - select SND_SOC_L3 config SND_SOC_UDA1380 tristate diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index ccd8973683db..675732e724d5 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -8,7 +8,7 @@ config SND_OMAP_SOC_MCBSP config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" - depends on SND_OMAP_SOC && MACH_NOKIA_N810 + depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C select SND_OMAP_SOC_MCBSP select OMAP_MUX select SND_SOC_TLV320AIC3X @@ -17,7 +17,7 @@ config SND_OMAP_SOC_N810 config SND_OMAP_SOC_OSK5912 tristate "SoC Audio support for omap osk5912" - depends on SND_OMAP_SOC && MACH_OMAP_OSK + depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC23 help -- cgit v1.2.3 From 01e097d6c409a6eb64758dce9fcde0c70073fe36 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 15:07:45 +0000 Subject: ASoC: Include header file in cs4270 and wm9705 Ensures that the DAI and socdev exported by the codec match up with their exported prototype. Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 2 ++ sound/soc/codecs/wm9705.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 2e4ce04925e2..e2130d7b1e41 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -29,6 +29,8 @@ #include #include +#include "cs4270.h" + /* Private data for the CS4270 */ struct cs4270_private { unsigned int mclk; /* Input frequency of the MCLK pin */ diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index 5e1937ac0b5e..d5c81bb3decb 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -20,6 +20,8 @@ #include #include +#include "wm9705.h" + /* * WM9705 register cache */ -- cgit v1.2.3 From 070504ade7a95a0f4395673717f3bb7d41793ca8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 15:34:54 +0000 Subject: ASoC: Fix L3 bus handling in Kconfig It has no external dependencies but needs to be selected for L3 based codecs to work. Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 1 + sound/soc/s3c24xx/Kconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 656f180b2c1f..a195303603e0 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1980 if SND_SOC_AC97_BUS select SND_SOC_AD73311 if I2C diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index fcd03acf10f6..e05a71084c32 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -48,4 +48,5 @@ config SND_S3C24XX_SOC_S3C24XX_UDA134X tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" depends on SND_S3C24XX_SOC select SND_S3C24XX_SOC_I2S + select SND_SOC_L3 select SND_SOC_UDA134X -- cgit v1.2.3 From 0db4d0705260dd4bddf1e5a5441c58bdf08bdc9f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 23 Jan 2009 16:31:19 -0600 Subject: ASoC: improve I2C initialization code in CS4270 driver Further improvements in the I2C initialization sequence of the CS4270 driver. All ASoC initialization is now done in the I2C probe function. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 252 +++++++++++++++++++++------------------------- 1 file changed, 113 insertions(+), 139 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index e2130d7b1e41..2aa12fdbd2ca 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -31,12 +31,6 @@ #include "cs4270.h" -/* Private data for the CS4270 */ -struct cs4270_private { - unsigned int mclk; /* Input frequency of the MCLK pin */ - unsigned int mode; /* The mode (I2S or left-justified) */ -}; - /* * The codec isn't really big-endian or little-endian, since the I2S * interface requires data to be sent serially with the MSbit first. @@ -109,6 +103,14 @@ struct cs4270_private { #define CS4270_MUTE_DAC_A 0x01 #define CS4270_MUTE_DAC_B 0x02 +/* Private data for the CS4270 */ +struct cs4270_private { + struct snd_soc_codec codec; + u8 reg_cache[CS4270_NUMREGS]; + unsigned int mclk; /* Input frequency of the MCLK pin */ + unsigned int mode; /* The mode (I2S or left-justified) */ +}; + /* * Clock Ratio Selection for Master Mode with I2C enabled * @@ -504,6 +506,31 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { */ static struct snd_soc_device *cs4270_socdev; +struct snd_soc_dai cs4270_dai = { + .name = "cs4270", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = 0, + .formats = CS4270_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = 0, + .formats = CS4270_FORMATS, + }, + .ops = { + .hw_params = cs4270_hw_params, + .set_sysclk = cs4270_set_dai_sysclk, + .set_fmt = cs4270_set_dai_fmt, + .digital_mute = cs4270_mute, + }, +}; +EXPORT_SYMBOL_GPL(cs4270_dai); + /* * Initialize the I2C interface of the CS4270 * @@ -517,47 +544,52 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) { struct snd_soc_device *socdev = cs4270_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec; + struct cs4270_private *cs4270; int i; int ret = 0; - /* Probing all possible addresses has one drawback: if there are - multiple CS4270s on the bus, then you cannot specify which - socdev is matched with which CS4270. For now, we just reject - this I2C device if the socdev already has one attached. */ - if (codec->control_data) - return -ENODEV; - - /* Note: codec_dai->codec is NULL here */ - - codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL); - if (!codec->reg_cache) { - printk(KERN_ERR "cs4270: could not allocate register cache\n"); - ret = -ENOMEM; - goto error; - } - /* Verify that we have a CS4270 */ ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); if (ret < 0) { printk(KERN_ERR "cs4270: failed to read I2C\n"); - goto error; + return ret; } /* The top four bits of the chip ID should be 1100. */ if ((ret & 0xF0) != 0xC0) { - /* The device at this address is not a CS4270 codec */ - ret = -ENODEV; - goto error; + printk(KERN_ERR "cs4270: device at addr %X is not a CS4270\n", + i2c_client->addr); + return -ENODEV; } printk(KERN_INFO "cs4270: found device at I2C address %X\n", i2c_client->addr); printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF); + /* Allocate enough space for the snd_soc_codec structure + and our private data together. */ + cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL); + if (!cs4270) { + printk(KERN_ERR "cs4270: Could not allocate codec structure\n"); + return -ENOMEM; + } + codec = &cs4270->codec; + socdev->codec = codec; + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->name = "CS4270"; + codec->owner = THIS_MODULE; + codec->dai = &cs4270_dai; + codec->num_dai = 1; + codec->private_data = cs4270; codec->control_data = i2c_client; codec->read = cs4270_read_reg_cache; codec->write = cs4270_i2c_write; + codec->reg_cache = cs4270->reg_cache; codec->reg_cache_size = CS4270_NUMREGS; /* The I2C interface is set up, so pre-fill our register cache */ @@ -565,35 +597,72 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, ret = cs4270_fill_cache(codec); if (ret < 0) { printk(KERN_ERR "cs4270: failed to fill register cache\n"); - goto error; + goto error_free_codec; + } + + /* Register PCMs */ + + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "cs4270: failed to create PCMs\n"); + goto error_free_codec; } /* Add the non-DAPM controls */ for (i = 0; i < ARRAY_SIZE(cs4270_snd_controls); i++) { - struct snd_kcontrol *kctrl = - snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL); + struct snd_kcontrol *kctrl; + + kctrl = snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL); + if (!kctrl) { + printk(KERN_ERR "cs4270: error creating control '%s'\n", + cs4270_snd_controls[i].name); + ret = -ENOMEM; + goto error_free_pcms; + } ret = snd_ctl_add(codec->card, kctrl); - if (ret < 0) - goto error; + if (ret < 0) { + printk(KERN_ERR "cs4270: error adding control '%s'\n", + cs4270_snd_controls[i].name); + goto error_free_pcms; + } } - i2c_set_clientdata(i2c_client, codec); + /* Initialize the SOC device */ + + ret = snd_soc_init_card(socdev); + if (ret < 0) { + printk(KERN_ERR "cs4270: failed to register card\n"); + goto error_free_pcms;; + } + + i2c_set_clientdata(i2c_client, socdev); return 0; -error: - codec->control_data = NULL; +error_free_pcms: + snd_soc_free_pcms(socdev); - kfree(codec->reg_cache); - codec->reg_cache = NULL; - codec->reg_cache_size = 0; +error_free_codec: + kfree(cs4270); return ret; } -static const struct i2c_device_id cs4270_id[] = { +static int cs4270_i2c_remove(struct i2c_client *i2c_client) +{ + struct snd_soc_device *socdev = i2c_get_clientdata(i2c_client); + struct snd_soc_codec *codec = socdev->codec; + struct cs4270_private *cs4270 = codec->private_data; + + snd_soc_free_pcms(socdev); + kfree(cs4270); + + return 0; +} + +static struct i2c_device_id cs4270_id[] = { {"cs4270", 0}, {} }; @@ -606,27 +675,9 @@ static struct i2c_driver cs4270_i2c_driver = { }, .id_table = cs4270_id, .probe = cs4270_i2c_probe, + .remove = cs4270_i2c_remove, }; -struct snd_soc_dai cs4270_dai = { - .name = "CS4270", - .playback = { - .stream_name = "Playback", - .channels_min = 1, - .channels_max = 2, - .rates = 0, - .formats = CS4270_FORMATS, - }, - .capture = { - .stream_name = "Capture", - .channels_min = 1, - .channels_max = 2, - .rates = 0, - .formats = CS4270_FORMATS, - }, -}; -EXPORT_SYMBOL_GPL(cs4270_dai); - /* * ASoC probe function * @@ -635,94 +686,15 @@ EXPORT_SYMBOL_GPL(cs4270_dai); */ static int cs4270_probe(struct platform_device *pdev) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec; - int ret = 0; - - printk(KERN_INFO "CS4270 ALSA SoC Codec\n"); - - /* Allocate enough space for the snd_soc_codec structure - and our private data together. */ - codec = kzalloc(ALIGN(sizeof(struct snd_soc_codec), 4) + - sizeof(struct cs4270_private), GFP_KERNEL); - if (!codec) { - printk(KERN_ERR "cs4270: Could not allocate codec structure\n"); - return -ENOMEM; - } - - mutex_init(&codec->mutex); - INIT_LIST_HEAD(&codec->dapm_widgets); - INIT_LIST_HEAD(&codec->dapm_paths); - - codec->name = "CS4270"; - codec->owner = THIS_MODULE; - codec->dai = &cs4270_dai; - codec->num_dai = 1; - codec->private_data = (void *) codec + - ALIGN(sizeof(struct snd_soc_codec), 4); - - socdev->codec = codec; - - /* Register PCMs */ - - ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); - if (ret < 0) { - printk(KERN_ERR "cs4270: failed to create PCMs\n"); - goto error_free_codec; - } - - cs4270_socdev = socdev; - - ret = i2c_add_driver(&cs4270_i2c_driver); - if (ret) { - printk(KERN_ERR "cs4270: failed to attach driver"); - goto error_free_pcms; - } - - /* Did we find a CS4270 on the I2C bus? */ - if (!codec->control_data) { - printk(KERN_ERR "cs4270: failed to attach driver"); - goto error_del_driver; - } + cs4270_socdev = platform_get_drvdata(pdev);; - /* Initialize codec ops */ - cs4270_dai.ops.hw_params = cs4270_hw_params; - cs4270_dai.ops.set_sysclk = cs4270_set_dai_sysclk; - cs4270_dai.ops.set_fmt = cs4270_set_dai_fmt; - cs4270_dai.ops.digital_mute = cs4270_mute; - - ret = snd_soc_init_card(socdev); - if (ret < 0) { - printk(KERN_ERR "cs4270: failed to register card\n"); - goto error_del_driver; - } - - return 0; - -error_del_driver: - i2c_del_driver(&cs4270_i2c_driver); - -error_free_pcms: - snd_soc_free_pcms(socdev); - -error_free_codec: - kfree(socdev->codec); - socdev->codec = NULL; - - return ret; + return i2c_add_driver(&cs4270_i2c_driver); } static int cs4270_remove(struct platform_device *pdev) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - - snd_soc_free_pcms(socdev); - i2c_del_driver(&cs4270_i2c_driver); - kfree(socdev->codec); - socdev->codec = NULL; - return 0; } @@ -740,6 +712,8 @@ EXPORT_SYMBOL_GPL(soc_codec_device_cs4270); static int __init cs4270_init(void) { + printk(KERN_INFO "Cirrus Logic CS4270 ALSA SoC Codec Driver\n"); + return snd_soc_register_dai(&cs4270_dai); } module_init(cs4270_init); -- cgit v1.2.3 From ca8d33fc9fafe373362d35107f01fba1e73fb966 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Mon, 26 Jan 2009 09:33:52 -0500 Subject: ALSA: hda: 92hd71xxx disable unmute support for codecs that don't have input amps Some revisions of the 92hd71xxx codec families don't have input amps on ports 0xa, 0xd and 0xf, so probe the widget caps on port 0xa and check for support, if found run snd_hda_sequence_write_cache() on the stac92hd71xxx_unmute_core_init verb list. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 80a4c288b319..03b26426611b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -858,26 +858,25 @@ static struct hda_verb stac92hd83xxx_core_init[] = { static struct hda_verb stac92hd71bxx_core_init[] = { /* set master volume and direct control */ { 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, - /* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */ - { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {} }; -#define HD_DISABLE_PORTF 2 +#define HD_DISABLE_PORTF 1 static struct hda_verb stac92hd71bxx_analog_core_init[] = { /* start of config #1 */ /* connect port 0f to audio mixer */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2}, - /* unmute right and left channels for node 0x0f */ - { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* start of config #2 */ /* set master volume and direct control */ { 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, - /* unmute right and left channels for nodes 0x0a, 0xd */ + {} +}; + +static struct hda_verb stac92hd71bxx_unmute_core_init[] = { + /* unmute right and left channels for nodes 0x0f, 0xa, 0x0d */ + { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {} @@ -4942,6 +4941,7 @@ static struct hda_input_mux stac92hd71bxx_dmux = { static int patch_stac92hd71bxx(struct hda_codec *codec) { struct sigmatel_spec *spec; + struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init; int err = 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); @@ -5015,6 +5015,7 @@ again: /* disable VSW */ spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF]; + unmute_init++; stac_change_pin_config(codec, 0xf, 0x40f000f0); break; case 0x111d7603: /* 6 Port with Analog Mixer */ @@ -5031,6 +5032,9 @@ again: codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; } + if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP) + snd_hda_sequence_write_cache(codec, unmute_init); + spec->aloopback_mask = 0x50; spec->aloopback_shift = 0; -- cgit v1.2.3 From b7eb4a06e9980973755b7e95a6d97fb8decbf8fd Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 26 Jan 2009 08:08:34 +0100 Subject: sound: usb-audio: use normal number of frames for no-data URBs When sending a silence URB (before playback has started, or when it is paused), use the number of frames that would be normally sent instead of a single frame so that the rate at which completion interrupts arrive is consistent. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index c709b9563226..417d557ed641 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -525,7 +525,7 @@ static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs) /* * Prepare urb for streaming before playback starts or when paused. * - * We don't have any data, so we send a frame of silence. + * We don't have any data, so we send silence. */ static int prepare_nodata_playback_urb(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, @@ -537,13 +537,13 @@ static int prepare_nodata_playback_urb(struct snd_usb_substream *subs, offs = 0; urb->dev = ctx->subs->dev; - urb->number_of_packets = subs->packs_per_ms; - for (i = 0; i < subs->packs_per_ms; ++i) { + for (i = 0; i < ctx->packets; ++i) { counts = snd_usb_audio_next_packet_size(subs); urb->iso_frame_desc[i].offset = offs * stride; urb->iso_frame_desc[i].length = counts * stride; offs += counts; } + urb->number_of_packets = ctx->packets; urb->transfer_buffer_length = offs * stride; memset(urb->transfer_buffer, subs->cur_audiofmt->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0, -- cgit v1.2.3 From 4d788e040b72d2a46ea3ba726b7fa0b65de06c88 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 26 Jan 2009 08:09:28 +0100 Subject: sound: usb-audio: limit playback queue length Once our URBs contain enough packets, queueing more URBs does not give us any additional underrun protection (as we use double-buffering) but just increases latency unnecessarily. Therefore, we try to limit the queue length to some reasonable value. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 417d557ed641..f3d4de23fedf 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -108,6 +108,7 @@ MODULE_PARM_DESC(ignore_ctl_error, #define MAX_URBS 8 #define SYNC_URBS 4 /* always four urbs for sync */ #define MIN_PACKS_URB 1 /* minimum 1 packet per urb */ +#define MAX_QUEUE 24 /* try not to exceed this queue length, in ms */ struct audioformat { struct list_head list; @@ -1079,7 +1080,7 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri /* decide how many packets to be used */ if (is_playback) { - unsigned int minsize; + unsigned int minsize, maxpacks; /* determine how small a packet can be */ minsize = (subs->freqn >> (16 - subs->datainterval)) * (frame_bits >> 3); @@ -1094,6 +1095,12 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri /* we need at least two URBs for queueing */ if (total_packs < 2 * MIN_PACKS_URB * packs_per_ms) total_packs = 2 * MIN_PACKS_URB * packs_per_ms; + else { + /* and we don't want too long a queue either */ + maxpacks = max((unsigned int)MAX_QUEUE, urb_packs * 2); + if (total_packs > maxpacks * packs_per_ms) + total_packs = maxpacks * packs_per_ms; + } } else { total_packs = MAX_URBS * urb_packs; } -- cgit v1.2.3 From 160389c8d21c8139a93191c2e5ca2273f311ed4e Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 26 Jan 2009 08:10:19 +0100 Subject: sound: usb-audio: make URB sizes more equal Distribute the packets evenly among the URBs, instead of making all URBs except the last one to have the maximum size. This makes the timing of pointer updates more regular and removes some special cases from the code. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index f3d4de23fedf..44485b29f675 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1035,9 +1035,9 @@ static void release_substream_urbs(struct snd_usb_substream *subs, int force) static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int period_bytes, unsigned int rate, unsigned int frame_bits) { - unsigned int maxsize, n, i; + unsigned int maxsize, i; int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK; - unsigned int npacks[MAX_URBS], urb_packs, total_packs, packs_per_ms; + unsigned int urb_packs, total_packs, packs_per_ms; /* calculate the frequency in 16.16 format */ if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) @@ -1109,31 +1109,11 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri /* too much... */ subs->nurbs = MAX_URBS; total_packs = MAX_URBS * urb_packs; - } - n = total_packs; - for (i = 0; i < subs->nurbs; i++) { - npacks[i] = n > urb_packs ? urb_packs : n; - n -= urb_packs; - } - if (subs->nurbs <= 1) { + } else if (subs->nurbs < 2) { /* too little - we need at least two packets * to ensure contiguous playback/capture */ subs->nurbs = 2; - npacks[0] = (total_packs + 1) / 2; - npacks[1] = total_packs - npacks[0]; - } else if (npacks[subs->nurbs-1] < MIN_PACKS_URB * packs_per_ms) { - /* the last packet is too small.. */ - if (subs->nurbs > 2) { - /* merge to the first one */ - npacks[0] += npacks[subs->nurbs - 1]; - subs->nurbs--; - } else { - /* divide to two */ - subs->nurbs = 2; - npacks[0] = (total_packs + 1) / 2; - npacks[1] = total_packs - npacks[0]; - } } /* allocate and initialize data urbs */ @@ -1141,7 +1121,8 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri struct snd_urb_ctx *u = &subs->dataurb[i]; u->index = i; u->subs = subs; - u->packets = npacks[i]; + u->packets = (i + 1) * total_packs / subs->nurbs + - i * total_packs / subs->nurbs; u->buffer_size = maxsize * u->packets; if (subs->fmt_type == USB_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ -- cgit v1.2.3 From 18801be7f805b891876a6676ec7fac2e1acdec13 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Dec 2008 18:17:09 +0900 Subject: sh: make gpio_get/set_value() O(1) This patch modifies the table based SuperH gpio implementation to make use of direct table lookups. With this change the functions gpio_get_value() and gpio_set_value() are O(1). Tested on Migo-R using bitbanging mmc. Performance is improved from 11 KBytes/s to 26 Kbytes/s. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/gpio.h | 7 ++++++- arch/sh/kernel/gpio.c | 48 +++++++++++++++++++++++++++++++++++----------- 2 files changed, 43 insertions(+), 12 deletions(-) diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index 90673658eb14..942fefa61c7e 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -20,7 +20,7 @@ #endif typedef unsigned short pinmux_enum_t; -typedef unsigned char pinmux_flag_t; +typedef unsigned short pinmux_flag_t; #define PINMUX_TYPE_NONE 0 #define PINMUX_TYPE_FUNCTION 1 @@ -34,6 +34,11 @@ typedef unsigned char pinmux_flag_t; #define PINMUX_FLAG_WANT_PULLUP (1 << 3) #define PINMUX_FLAG_WANT_PULLDOWN (1 << 4) +#define PINMUX_FLAG_DBIT_SHIFT 5 +#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT) +#define PINMUX_FLAG_DREG_SHIFT 10 +#define PINMUX_FLAG_DREG (0x3f << PINMUX_FLAG_DREG_SHIFT) + struct pinmux_gpio { pinmux_enum_t enum_id; pinmux_flag_t flags; diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c index d37165361034..fe92ba151b89 100644 --- a/arch/sh/kernel/gpio.c +++ b/arch/sh/kernel/gpio.c @@ -95,14 +95,13 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width, return 0; } -static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, - struct pinmux_data_reg **drp, int *bitp) +static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio) { - pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id; + struct pinmux_gpio *gpiop = &gpioc->gpios[gpio]; struct pinmux_data_reg *data_reg; int k, n; - if (!enum_in_range(enum_id, &gpioc->data)) + if (!enum_in_range(gpiop->enum_id, &gpioc->data)) return -1; k = 0; @@ -113,19 +112,38 @@ static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, break; for (n = 0; n < data_reg->reg_width; n++) { - if (data_reg->enum_ids[n] == enum_id) { - *drp = data_reg; - *bitp = n; + if (data_reg->enum_ids[n] == gpiop->enum_id) { + gpiop->flags &= ~PINMUX_FLAG_DREG; + gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT); + gpiop->flags &= ~PINMUX_FLAG_DBIT; + gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT); return 0; - } } k++; } + BUG(); + return -1; } +static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, + struct pinmux_data_reg **drp, int *bitp) +{ + struct pinmux_gpio *gpiop = &gpioc->gpios[gpio]; + int k, n; + + if (!enum_in_range(gpiop->enum_id, &gpioc->data)) + return -1; + + k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT; + n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT; + *drp = gpioc->data_regs + k; + *bitp = n; + return 0; +} + static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id, struct pinmux_cfg_reg **crp, int *indexp, unsigned long **cntp) @@ -341,7 +359,8 @@ int __gpio_request(unsigned gpio) BUG(); } - gpioc->gpios[gpio].flags = pinmux_type; + gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[gpio].flags |= pinmux_type; ret = 0; err_unlock: @@ -364,7 +383,8 @@ void gpio_free(unsigned gpio) pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE; pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE); - gpioc->gpios[gpio].flags = PINMUX_TYPE_NONE; + gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[gpio].flags |= PINMUX_TYPE_NONE; spin_unlock_irqrestore(&gpio_lock, flags); } @@ -401,7 +421,8 @@ static int pinmux_direction(struct pinmux_info *gpioc, GPIO_CFG_REQ) != 0) BUG(); - gpioc->gpios[gpio].flags = new_pinmux_type; + gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[gpio].flags |= new_pinmux_type; ret = 0; err_out: @@ -494,9 +515,14 @@ EXPORT_SYMBOL(gpio_set_value); int register_pinmux(struct pinmux_info *pip) { + int k; + registered_gpio = pip; pr_info("pinmux: %s handling gpio %d -> %d\n", pip->name, pip->first_gpio, pip->last_gpio); + for (k = pip->first_gpio; k <= pip->last_gpio; k++) + setup_data_reg(pip, k); + return 0; } -- cgit v1.2.3 From 0fc64cc0a27288e77ee8e12648d59632649371fc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Dec 2008 18:17:18 +0900 Subject: sh: lockless gpio_get_value() This patch separates the register read and write functions to allow lockless gpio_get_value(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/gpio.c | 126 +++++++++++++++++++++++++------------------------- 1 file changed, 63 insertions(+), 63 deletions(-) diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c index fe92ba151b89..f8397a09491c 100644 --- a/arch/sh/kernel/gpio.c +++ b/arch/sh/kernel/gpio.c @@ -46,9 +46,8 @@ static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r) return 1; } -static int read_write_reg(unsigned long reg, unsigned long reg_width, - unsigned long field_width, unsigned long in_pos, - unsigned long value, int do_write) +static int gpio_read_reg(unsigned long reg, unsigned long reg_width, + unsigned long field_width, unsigned long in_pos) { unsigned long data, mask, pos; @@ -57,10 +56,9 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width, pos = reg_width - ((in_pos + 1) * field_width); #ifdef DEBUG - pr_info("%s, addr = %lx, value = %ld, pos = %ld, " + pr_info("read_reg: addr = %lx, pos = %ld, " "r_width = %ld, f_width = %ld\n", - do_write ? "write" : "read", reg, value, pos, - reg_width, field_width); + reg, pos, reg_width, field_width); #endif switch (reg_width) { @@ -75,24 +73,38 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width, break; } - if (!do_write) - return (data >> pos) & mask; + return (data >> pos) & mask; +} + +static void gpio_write_reg(unsigned long reg, unsigned long reg_width, + unsigned long field_width, unsigned long in_pos, + unsigned long value) +{ + unsigned long mask, pos; + + mask = (1 << field_width) - 1; + pos = reg_width - ((in_pos + 1) * field_width); - data &= ~(mask << pos); - data |= value << pos; +#ifdef DEBUG + pr_info("write_reg addr = %lx, value = %ld, pos = %ld, " + "r_width = %ld, f_width = %ld\n", + reg, value, pos, reg_width, field_width); +#endif + + mask = ~(mask << pos); + value = value << pos; switch (reg_width) { case 8: - ctrl_outb(data, reg); + ctrl_outb((ctrl_inb(reg) & mask) | value, reg); break; case 16: - ctrl_outw(data, reg); + ctrl_outw((ctrl_inw(reg) & mask) | value, reg); break; case 32: - ctrl_outl(data, reg); + ctrl_outl((ctrl_inl(reg) & mask) | value, reg); break; } - return 0; } static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio) @@ -205,9 +217,9 @@ static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio, return -1; } -static int write_config_reg(struct pinmux_info *gpioc, - struct pinmux_cfg_reg *crp, - int index) +static void write_config_reg(struct pinmux_info *gpioc, + struct pinmux_cfg_reg *crp, + int index) { unsigned long ncomb, pos, value; @@ -215,8 +227,7 @@ static int write_config_reg(struct pinmux_info *gpioc, pos = index / ncomb; value = index % ncomb; - return read_write_reg(crp->reg, crp->reg_width, - crp->field_width, pos, value, 1); + gpio_write_reg(crp->reg, crp->reg_width, crp->field_width, pos, value); } static int check_config_reg(struct pinmux_info *gpioc, @@ -229,8 +240,8 @@ static int check_config_reg(struct pinmux_info *gpioc, pos = index / ncomb; value = index % ncomb; - if (read_write_reg(crp->reg, crp->reg_width, - crp->field_width, pos, 0, 0) == value) + if (gpio_read_reg(crp->reg, crp->reg_width, + crp->field_width, pos) == value) return 0; return -1; @@ -238,8 +249,8 @@ static int check_config_reg(struct pinmux_info *gpioc, enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE }; -int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, - int pinmux_type, int cfg_mode) +static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, + int pinmux_type, int cfg_mode) { struct pinmux_cfg_reg *cr = NULL; pinmux_enum_t enum_id; @@ -305,8 +316,7 @@ int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, break; case GPIO_CFG_REQ: - if (write_config_reg(gpioc, cr, index) != 0) - goto out_err; + write_config_reg(gpioc, cr, index); *cntp = *cntp + 1; break; @@ -393,9 +403,12 @@ EXPORT_SYMBOL(gpio_free); static int pinmux_direction(struct pinmux_info *gpioc, unsigned gpio, int new_pinmux_type) { - int ret, pinmux_type; + int pinmux_type; + int ret = -EINVAL; + + if (!gpioc) + goto err_out; - ret = -EINVAL; pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE; switch (pinmux_type) { @@ -433,68 +446,59 @@ int gpio_direction_input(unsigned gpio) { struct pinmux_info *gpioc = gpio_controller(gpio); unsigned long flags; - int ret = -EINVAL; - - if (!gpioc) - goto err_out; + int ret; spin_lock_irqsave(&gpio_lock, flags); ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT); spin_unlock_irqrestore(&gpio_lock, flags); - err_out: + return ret; } EXPORT_SYMBOL(gpio_direction_input); -static int __gpio_get_set_value(struct pinmux_info *gpioc, - unsigned gpio, int value, - int do_write) +static void __gpio_set_value(struct pinmux_info *gpioc, + unsigned gpio, int value) { struct pinmux_data_reg *dr = NULL; int bit = 0; - if (get_data_reg(gpioc, gpio, &dr, &bit) != 0) + if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) BUG(); else - value = read_write_reg(dr->reg, dr->reg_width, - 1, bit, !!value, do_write); - - return value; + gpio_write_reg(dr->reg, dr->reg_width, 1, bit, !!value); } int gpio_direction_output(unsigned gpio, int value) { struct pinmux_info *gpioc = gpio_controller(gpio); unsigned long flags; - int ret = -EINVAL; - - if (!gpioc) - goto err_out; + int ret; spin_lock_irqsave(&gpio_lock, flags); - __gpio_get_set_value(gpioc, gpio, value, 1); + __gpio_set_value(gpioc, gpio, value); ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT); spin_unlock_irqrestore(&gpio_lock, flags); - err_out: + return ret; } EXPORT_SYMBOL(gpio_direction_output); -int gpio_get_value(unsigned gpio) +static int __gpio_get_value(struct pinmux_info *gpioc, unsigned gpio) { - struct pinmux_info *gpioc = gpio_controller(gpio); - unsigned long flags; - int value = 0; + struct pinmux_data_reg *dr = NULL; + int bit = 0; - if (!gpioc) + if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) { BUG(); - else { - spin_lock_irqsave(&gpio_lock, flags); - value = __gpio_get_set_value(gpioc, gpio, 0, 0); - spin_unlock_irqrestore(&gpio_lock, flags); + return 0; } - return value; + return gpio_read_reg(dr->reg, dr->reg_width, 1, bit); +} + +int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio_controller(gpio), gpio); } EXPORT_SYMBOL(gpio_get_value); @@ -503,13 +507,9 @@ void gpio_set_value(unsigned gpio, int value) struct pinmux_info *gpioc = gpio_controller(gpio); unsigned long flags; - if (!gpioc) - BUG(); - else { - spin_lock_irqsave(&gpio_lock, flags); - __gpio_get_set_value(gpioc, gpio, value, 1); - spin_unlock_irqrestore(&gpio_lock, flags); - } + spin_lock_irqsave(&gpio_lock, flags); + __gpio_set_value(gpioc, gpio, value); + spin_unlock_irqrestore(&gpio_lock, flags); } EXPORT_SYMBOL(gpio_set_value); -- cgit v1.2.3 From 3292094e88ce6b76714dad8ec4b43d7c5c12ada2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Dec 2008 18:17:26 +0900 Subject: sh: lockless gpio_set_value() This patch optimizes the gpio data register handling for gpio_set_value(). Instead of using the good old spinlock-plus-read-modify-write strategy we now use a shadow register and atomic operations. This improves the bitbanging mmc performance on Migo-R from 26 Kbytes/s to 40 Kbytes/s. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/gpio.h | 2 +- arch/sh/kernel/gpio.c | 106 ++++++++++++++++++++++++++++++++++----------- 2 files changed, 82 insertions(+), 26 deletions(-) diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index 942fefa61c7e..46a6d7914df7 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -59,7 +59,7 @@ struct pinmux_cfg_reg { .enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \ struct pinmux_data_reg { - unsigned long reg, reg_width; + unsigned long reg, reg_width, reg_shadow; pinmux_enum_t *enum_ids; }; diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c index f8397a09491c..280135673726 100644 --- a/arch/sh/kernel/gpio.c +++ b/arch/sh/kernel/gpio.c @@ -46,6 +46,62 @@ static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r) return 1; } +static unsigned long gpio_read_raw_reg(unsigned long reg, + unsigned long reg_width) +{ + switch (reg_width) { + case 8: + return ctrl_inb(reg); + case 16: + return ctrl_inw(reg); + case 32: + return ctrl_inl(reg); + } + + BUG(); + return 0; +} + +static void gpio_write_raw_reg(unsigned long reg, + unsigned long reg_width, + unsigned long data) +{ + switch (reg_width) { + case 8: + ctrl_outb(data, reg); + return; + case 16: + ctrl_outw(data, reg); + return; + case 32: + ctrl_outl(data, reg); + return; + } + + BUG(); +} + +static void gpio_write_bit(struct pinmux_data_reg *dr, + unsigned long in_pos, unsigned long value) +{ + unsigned long pos; + + pos = dr->reg_width - (in_pos + 1); + +#ifdef DEBUG + pr_info("write_bit addr = %lx, value = %ld, pos = %ld, " + "r_width = %ld\n", + dr->reg, !!value, pos, dr->reg_width); +#endif + + if (value) + set_bit(pos, &dr->reg_shadow); + else + clear_bit(pos, &dr->reg_shadow); + + gpio_write_raw_reg(dr->reg, dr->reg_width, dr->reg_shadow); +} + static int gpio_read_reg(unsigned long reg, unsigned long reg_width, unsigned long field_width, unsigned long in_pos) { @@ -61,18 +117,7 @@ static int gpio_read_reg(unsigned long reg, unsigned long reg_width, reg, pos, reg_width, field_width); #endif - switch (reg_width) { - case 8: - data = ctrl_inb(reg); - break; - case 16: - data = ctrl_inw(reg); - break; - case 32: - data = ctrl_inl(reg); - break; - } - + data = gpio_read_raw_reg(reg, reg_width); return (data >> pos) & mask; } @@ -140,6 +185,26 @@ static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio) return -1; } +static void setup_data_regs(struct pinmux_info *gpioc) +{ + struct pinmux_data_reg *drp; + int k; + + for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++) + setup_data_reg(gpioc, k); + + k = 0; + while (1) { + drp = gpioc->data_regs + k; + + if (!drp->reg_width) + break; + + drp->reg_shadow = gpio_read_raw_reg(drp->reg, drp->reg_width); + k++; + } +} + static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, struct pinmux_data_reg **drp, int *bitp) { @@ -465,7 +530,7 @@ static void __gpio_set_value(struct pinmux_info *gpioc, if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) BUG(); else - gpio_write_reg(dr->reg, dr->reg_width, 1, bit, !!value); + gpio_write_bit(dr, bit, value); } int gpio_direction_output(unsigned gpio, int value) @@ -474,8 +539,8 @@ int gpio_direction_output(unsigned gpio, int value) unsigned long flags; int ret; - spin_lock_irqsave(&gpio_lock, flags); __gpio_set_value(gpioc, gpio, value); + spin_lock_irqsave(&gpio_lock, flags); ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT); spin_unlock_irqrestore(&gpio_lock, flags); @@ -504,25 +569,16 @@ EXPORT_SYMBOL(gpio_get_value); void gpio_set_value(unsigned gpio, int value) { - struct pinmux_info *gpioc = gpio_controller(gpio); - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - __gpio_set_value(gpioc, gpio, value); - spin_unlock_irqrestore(&gpio_lock, flags); + __gpio_set_value(gpio_controller(gpio), gpio, value); } EXPORT_SYMBOL(gpio_set_value); int register_pinmux(struct pinmux_info *pip) { - int k; - registered_gpio = pip; + setup_data_regs(pip); pr_info("pinmux: %s handling gpio %d -> %d\n", pip->name, pip->first_gpio, pip->last_gpio); - for (k = pip->first_gpio; k <= pip->last_gpio; k++) - setup_data_reg(pip, k); - return 0; } -- cgit v1.2.3 From 69edbba0021a48fe034849501513930f6175cb5d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Dec 2008 18:17:34 +0900 Subject: sh: use gpiolib This patch updates the SuperH gpio code to make use of gpiolib. The gpiolib callbacks get() and set() are lockless, but we use our own spinlock for the other operations to make sure hardware register bitfield accesses stay atomic. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 +++ arch/sh/boards/Kconfig | 4 +- arch/sh/include/asm/gpio.h | 61 +++++++++++++++----------- arch/sh/kernel/Makefile_32 | 2 +- arch/sh/kernel/Makefile_64 | 2 +- arch/sh/kernel/gpio.c | 106 ++++++++++++++++++++++----------------------- drivers/serial/sh-sci.h | 2 +- 7 files changed, 100 insertions(+), 84 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ebabe518e729..3a2be2278944 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U64 config ARCH_NO_VIRT_TO_BUS def_bool y +config ARCH_WANT_OPTIONAL_GPIOLIB + def_bool y + depends on !ARCH_REQUIRE_GPIOLIB + +config ARCH_REQUIRE_GPIOLIB + def_bool n + config IO_TRAPPED bool diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 861914747e4e..802d5c475a7d 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -165,7 +165,7 @@ config SH_SH7785LCR_29BIT_PHYSMAPS config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -173,7 +173,7 @@ config SH_MIGOR config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index 46a6d7914df7..61f93da2c62e 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -19,6 +19,40 @@ #include #endif +#define ARCH_NR_GPIOS 512 +#include + +#ifdef CONFIG_GPIOLIB + +static inline int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + WARN_ON(1); + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + WARN_ON(1); + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + typedef unsigned short pinmux_enum_t; typedef unsigned short pinmux_flag_t; @@ -94,34 +128,9 @@ struct pinmux_info { unsigned int gpio_data_size; unsigned long *gpio_in_use; + struct gpio_chip chip; }; int register_pinmux(struct pinmux_info *pip); -int __gpio_request(unsigned gpio); -static inline int gpio_request(unsigned gpio, const char *label) -{ - return __gpio_request(gpio); -} -void gpio_free(unsigned gpio); -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); -void gpio_set_value(unsigned gpio, int value); - -/* IRQ modes are unspported */ -static inline int gpio_to_irq(unsigned gpio) -{ - WARN_ON(1); - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - WARN_ON(1); - return -EINVAL; -} - -#include - #endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 2e1b86e16ab5..7e7d22b5b4ca 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -27,7 +27,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index fe425d7f6871..cbcbbb6c0497 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -15,6 +15,6 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB) += gpio.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c index 280135673726..d22e5af699f9 100644 --- a/arch/sh/kernel/gpio.c +++ b/arch/sh/kernel/gpio.c @@ -19,22 +19,6 @@ #include #include -static struct pinmux_info *registered_gpio; - -static struct pinmux_info *gpio_controller(unsigned gpio) -{ - if (!registered_gpio) - return NULL; - - if (gpio < registered_gpio->first_gpio) - return NULL; - - if (gpio > registered_gpio->last_gpio) - return NULL; - - return registered_gpio; -} - static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r) { if (enum_id < r->begin) @@ -398,9 +382,14 @@ static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, static DEFINE_SPINLOCK(gpio_lock); -int __gpio_request(unsigned gpio) +static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip) { - struct pinmux_info *gpioc = gpio_controller(gpio); + return container_of(chip, struct pinmux_info, chip); +} + +static int sh_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct pinmux_info *gpioc = chip_to_pinmux(chip); struct pinmux_data_reg *dummy; unsigned long flags; int i, ret, pinmux_type; @@ -412,30 +401,30 @@ int __gpio_request(unsigned gpio) spin_lock_irqsave(&gpio_lock, flags); - if ((gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE) + if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE) goto err_unlock; /* setup pin function here if no data is associated with pin */ - if (get_data_reg(gpioc, gpio, &dummy, &i) != 0) + if (get_data_reg(gpioc, offset, &dummy, &i) != 0) pinmux_type = PINMUX_TYPE_FUNCTION; else pinmux_type = PINMUX_TYPE_GPIO; if (pinmux_type == PINMUX_TYPE_FUNCTION) { - if (pinmux_config_gpio(gpioc, gpio, + if (pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_DRYRUN) != 0) goto err_unlock; - if (pinmux_config_gpio(gpioc, gpio, + if (pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_REQ) != 0) BUG(); } - gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; - gpioc->gpios[gpio].flags |= pinmux_type; + gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[offset].flags |= pinmux_type; ret = 0; err_unlock: @@ -443,11 +432,10 @@ int __gpio_request(unsigned gpio) err_out: return ret; } -EXPORT_SYMBOL(__gpio_request); -void gpio_free(unsigned gpio) +static void sh_gpio_free(struct gpio_chip *chip, unsigned offset) { - struct pinmux_info *gpioc = gpio_controller(gpio); + struct pinmux_info *gpioc = chip_to_pinmux(chip); unsigned long flags; int pinmux_type; @@ -456,14 +444,13 @@ void gpio_free(unsigned gpio) spin_lock_irqsave(&gpio_lock, flags); - pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE; - pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE); - gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; - gpioc->gpios[gpio].flags |= PINMUX_TYPE_NONE; + pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE; + pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE); + gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE; spin_unlock_irqrestore(&gpio_lock, flags); } -EXPORT_SYMBOL(gpio_free); static int pinmux_direction(struct pinmux_info *gpioc, unsigned gpio, int new_pinmux_type) @@ -507,21 +494,20 @@ static int pinmux_direction(struct pinmux_info *gpioc, return ret; } -int gpio_direction_input(unsigned gpio) +static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - struct pinmux_info *gpioc = gpio_controller(gpio); + struct pinmux_info *gpioc = chip_to_pinmux(chip); unsigned long flags; int ret; spin_lock_irqsave(&gpio_lock, flags); - ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT); + ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT); spin_unlock_irqrestore(&gpio_lock, flags); return ret; } -EXPORT_SYMBOL(gpio_direction_input); -static void __gpio_set_value(struct pinmux_info *gpioc, +static void sh_gpio_set_value(struct pinmux_info *gpioc, unsigned gpio, int value) { struct pinmux_data_reg *dr = NULL; @@ -533,22 +519,22 @@ static void __gpio_set_value(struct pinmux_info *gpioc, gpio_write_bit(dr, bit, value); } -int gpio_direction_output(unsigned gpio, int value) +static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) { - struct pinmux_info *gpioc = gpio_controller(gpio); + struct pinmux_info *gpioc = chip_to_pinmux(chip); unsigned long flags; int ret; - __gpio_set_value(gpioc, gpio, value); + sh_gpio_set_value(gpioc, offset, value); spin_lock_irqsave(&gpio_lock, flags); - ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT); + ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT); spin_unlock_irqrestore(&gpio_lock, flags); return ret; } -EXPORT_SYMBOL(gpio_direction_output); -static int __gpio_get_value(struct pinmux_info *gpioc, unsigned gpio) +static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio) { struct pinmux_data_reg *dr = NULL; int bit = 0; @@ -561,24 +547,38 @@ static int __gpio_get_value(struct pinmux_info *gpioc, unsigned gpio) return gpio_read_reg(dr->reg, dr->reg_width, 1, bit); } -int gpio_get_value(unsigned gpio) +static int sh_gpio_get(struct gpio_chip *chip, unsigned offset) { - return __gpio_get_value(gpio_controller(gpio), gpio); + return sh_gpio_get_value(chip_to_pinmux(chip), offset); } -EXPORT_SYMBOL(gpio_get_value); -void gpio_set_value(unsigned gpio, int value) +static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - __gpio_set_value(gpio_controller(gpio), gpio, value); + sh_gpio_set_value(chip_to_pinmux(chip), offset, value); } -EXPORT_SYMBOL(gpio_set_value); int register_pinmux(struct pinmux_info *pip) { - registered_gpio = pip; - setup_data_regs(pip); - pr_info("pinmux: %s handling gpio %d -> %d\n", + struct gpio_chip *chip = &pip->chip; + + pr_info("sh pinmux: %s handling gpio %d -> %d\n", pip->name, pip->first_gpio, pip->last_gpio); - return 0; + setup_data_regs(pip); + + chip->request = sh_gpio_request; + chip->free = sh_gpio_free; + chip->direction_input = sh_gpio_direction_input; + chip->get = sh_gpio_get; + chip->direction_output = sh_gpio_direction_output; + chip->set = sh_gpio_set; + + WARN_ON(pip->first_gpio != 0); /* needs testing */ + + chip->label = pip->name; + chip->owner = THIS_MODULE; + chip->base = pip->first_gpio; + chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1; + + return gpiochip_add(chip); } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 3599828b9766..6a7cd498023d 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -1,6 +1,6 @@ #include #include -#include +#include #if defined(CONFIG_H83007) || defined(CONFIG_H83068) #include -- cgit v1.2.3 From 57e97cb8bedd06e8a2e562454423d58aab5827ce Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 6 Jan 2009 12:47:12 +0900 Subject: sh: Fix up GENERIC_GPIO build for ARCH_WANT_OPTIONAL_GPIO cases. CPUs define pinmux tables through the optional interface, while boards that require demux of their own require it explicitly. Roll the Makefile rules back to depend on GENERIC_GPIO, which covers both cases. Fixes a link error with an undefined reference to register_pinmux() on optional platforms. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_32 | 2 +- arch/sh/kernel/Makefile_64 | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 7e7d22b5b4ca..2e1b86e16ab5 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -27,7 +27,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB) += gpio.o +obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index cbcbbb6c0497..fe425d7f6871 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -15,6 +15,6 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o -obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB) += gpio.o +obj-$(CONFIG_GENERIC_GPIO) += gpio.o EXTRA_CFLAGS += -Werror -- cgit v1.2.3 From ae5e6d05a606e05e054f816bd01e02f69d38d283 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Jan 2009 17:16:25 +0900 Subject: sh: mach-highlander and mach-rsk require gpiolib. Fix up the build for mach-highlander and mach-rsk. These operated on the assumption that GENERIC_GPIO support with an optional GPIOLIB was possible. This used to be true, but has not been the case since commit-id d56cc8bc661ac1ceded8d45ba2d53bb134fee17d ("sh: use gpiolib"), where the GENERIC_GPIO implementation was rewritten to use GPIOLIB directly. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 ------- arch/sh/boards/Kconfig | 2 +- arch/sh/boards/mach-highlander/Kconfig | 2 +- arch/sh/boards/mach-rsk/Kconfig | 2 +- 4 files changed, 3 insertions(+), 10 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3a2be2278944..ebabe518e729 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -126,13 +126,6 @@ config ARCH_HAS_ILOG2_U64 config ARCH_NO_VIRT_TO_BUS def_bool y -config ARCH_WANT_OPTIONAL_GPIOLIB - def_bool y - depends on !ARCH_REQUIRE_GPIOLIB - -config ARCH_REQUIRE_GPIOLIB - def_bool n - config IO_TRAPPED bool diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 802d5c475a7d..c9da37088d2e 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -240,7 +240,7 @@ config SH_X3PROTO config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Select Magic Panel R2 if configuring for Magic Panel R2. diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig index 08057f62687b..def49cc0a7b9 100644 --- a/arch/sh/boards/mach-highlander/Kconfig +++ b/arch/sh/boards/mach-highlander/Kconfig @@ -18,7 +18,7 @@ config SH_R7780MP config SH_R7785RP bool "R7785RP board support" depends on CPU_SUBTYPE_SH7785 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB endchoice diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig index bff095dffc02..aeff3b042205 100644 --- a/arch/sh/boards/mach-rsk/Kconfig +++ b/arch/sh/boards/mach-rsk/Kconfig @@ -10,7 +10,7 @@ config SH_RSK7201 config SH_RSK7203 bool "RSK7203" - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB depends on CPU_SUBTYPE_SH7203 endchoice -- cgit v1.2.3 From 6627a653bceb3a54e55e5cdc478ec5b8d5c9cc44 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 22:55:23 +0000 Subject: ASoC: Push the codec runtime storage into the card structure This is a further stage on the road to refactoring away the ASoC platform device. Signed-off-by: Mark Brown --- include/sound/soc.h | 3 ++- sound/soc/codecs/ac97.c | 20 ++++++++++---------- sound/soc/codecs/ad1980.c | 12 ++++++------ sound/soc/codecs/ad73311.c | 8 ++++---- sound/soc/codecs/ak4535.c | 14 +++++++------- sound/soc/codecs/cs4270.c | 6 +++--- sound/soc/codecs/pcm3008.c | 12 ++++++------ sound/soc/codecs/ssm2602.c | 20 ++++++++++---------- sound/soc/codecs/tlv320aic23.c | 18 +++++++++--------- sound/soc/codecs/tlv320aic26.c | 4 ++-- sound/soc/codecs/tlv320aic3x.c | 14 +++++++------- sound/soc/codecs/twl4030.c | 12 ++++++------ sound/soc/codecs/uda134x.c | 18 +++++++++--------- sound/soc/codecs/uda1380.c | 18 +++++++++--------- sound/soc/codecs/wm8350.c | 10 +++++----- sound/soc/codecs/wm8510.c | 16 ++++++++-------- sound/soc/codecs/wm8580.c | 10 +++++----- sound/soc/codecs/wm8728.c | 16 ++++++++-------- sound/soc/codecs/wm8731.c | 20 ++++++++++---------- sound/soc/codecs/wm8750.c | 16 ++++++++-------- sound/soc/codecs/wm8753.c | 18 +++++++++--------- sound/soc/codecs/wm8900.c | 8 ++++---- sound/soc/codecs/wm8903.c | 18 +++++++++--------- sound/soc/codecs/wm8971.c | 14 +++++++------- sound/soc/codecs/wm8990.c | 14 +++++++------- sound/soc/codecs/wm9705.c | 15 ++++++++------- sound/soc/codecs/wm9712.c | 21 +++++++++++---------- sound/soc/codecs/wm9713.c | 17 +++++++++-------- sound/soc/soc-core.c | 37 +++++++++++++++++-------------------- sound/soc/soc-dapm.c | 6 +++--- sound/soc/soc-jack.c | 4 ++-- 31 files changed, 220 insertions(+), 219 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 7039343e8a78..0e7735264169 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -418,6 +418,8 @@ struct snd_soc_card { struct snd_soc_device *socdev; + struct snd_soc_codec *codec; + struct snd_soc_platform *platform; struct delayed_work delayed_work; struct work_struct deferred_resume_work; @@ -427,7 +429,6 @@ struct snd_soc_card { struct snd_soc_device { struct device *dev; struct snd_soc_card *card; - struct snd_soc_codec *codec; struct snd_soc_codec_device *codec_dev; void *codec_data; }; diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 89d41277616d..11f84b6e5cb8 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -30,7 +30,7 @@ static int ac97_prepare(struct snd_pcm_substream *substream, struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? AC97_PCM_FRONT_DAC_RATE : AC97_PCM_LR_ADC_RATE; @@ -84,10 +84,10 @@ static int ac97_soc_probe(struct platform_device *pdev) printk(KERN_INFO "AC97 SoC Audio Codec %s\n", AC97_VERSION); - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (!socdev->codec) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (!socdev->card->codec) return -ENOMEM; - codec = socdev->codec; + codec = socdev->card->codec; mutex_init(&codec->mutex); codec->name = "AC97"; @@ -123,21 +123,21 @@ bus_err: snd_soc_free_pcms(socdev); err: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(socdev->card->codec); + socdev->card->codec = NULL; return ret; } static int ac97_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (!codec) return 0; snd_soc_free_pcms(socdev); - kfree(socdev->codec); + kfree(socdev->card->codec); return 0; } @@ -147,7 +147,7 @@ static int ac97_soc_suspend(struct platform_device *pdev, pm_message_t msg) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - snd_ac97_suspend(socdev->codec->ac97); + snd_ac97_suspend(socdev->card->codec->ac97); return 0; } @@ -156,7 +156,7 @@ static int ac97_soc_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - snd_ac97_resume(socdev->codec->ac97); + snd_ac97_resume(socdev->card->codec->ac97); return 0; } diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index faf358758e13..ddb3b08ac23c 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -186,10 +186,10 @@ static int ad1980_soc_probe(struct platform_device *pdev) printk(KERN_INFO "AD1980 SoC Audio Codec\n"); - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (socdev->codec == NULL) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (socdev->card->codec == NULL) return -ENOMEM; - codec = socdev->codec; + codec = socdev->card->codec; mutex_init(&codec->mutex); codec->reg_cache = @@ -275,15 +275,15 @@ codec_err: kfree(codec->reg_cache); cache_err: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(socdev->card->codec); + socdev->card->codec = NULL; return ret; } static int ad1980_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec == NULL) return 0; diff --git a/sound/soc/codecs/ad73311.c b/sound/soc/codecs/ad73311.c index b09289a1e55a..e61dac5e7b8f 100644 --- a/sound/soc/codecs/ad73311.c +++ b/sound/soc/codecs/ad73311.c @@ -53,7 +53,7 @@ static int ad73311_soc_probe(struct platform_device *pdev) codec->owner = THIS_MODULE; codec->dai = &ad73311_dai; codec->num_dai = 1; - socdev->codec = codec; + socdev->card->codec = codec; INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -75,15 +75,15 @@ static int ad73311_soc_probe(struct platform_device *pdev) register_err: snd_soc_free_pcms(socdev); pcm_err: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(socdev->card->codec); + socdev->card->codec = NULL; return ret; } static int ad73311_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec == NULL) return 0; diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index f17c363cb1db..d56e6bb1fedb 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -329,7 +329,7 @@ static int ak4535_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct ak4535_priv *ak4535 = codec->private_data; u8 mode2 = ak4535_read_reg_cache(codec, AK4535_MODE2) & ~(0x3 << 5); int rate = params_rate(params), fs = 256; @@ -447,7 +447,7 @@ EXPORT_SYMBOL_GPL(ak4535_dai); static int ak4535_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; ak4535_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -456,7 +456,7 @@ static int ak4535_suspend(struct platform_device *pdev, pm_message_t state) static int ak4535_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; ak4535_sync(codec); ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY); ak4535_set_bias_level(codec, codec->suspend_bias_level); @@ -469,7 +469,7 @@ static int ak4535_resume(struct platform_device *pdev) */ static int ak4535_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; codec->name = "AK4535"; @@ -523,7 +523,7 @@ static int ak4535_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = ak4535_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -622,7 +622,7 @@ static int ak4535_probe(struct platform_device *pdev) } codec->private_data = ak4535; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -649,7 +649,7 @@ static int ak4535_probe(struct platform_device *pdev) static int ak4535_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) ak4535_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 2aa12fdbd2ca..21253b48289f 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -350,7 +350,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct cs4270_private *cs4270 = codec->private_data; int ret; unsigned int i; @@ -575,7 +575,7 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, return -ENOMEM; } codec = &cs4270->codec; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); @@ -653,7 +653,7 @@ error_free_codec: static int cs4270_i2c_remove(struct i2c_client *i2c_client) { struct snd_soc_device *socdev = i2c_get_clientdata(i2c_client); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct cs4270_private *cs4270 = codec->private_data; snd_soc_free_pcms(socdev); diff --git a/sound/soc/codecs/pcm3008.c b/sound/soc/codecs/pcm3008.c index 9a3e67e5319c..5cda9e6b5a74 100644 --- a/sound/soc/codecs/pcm3008.c +++ b/sound/soc/codecs/pcm3008.c @@ -67,11 +67,11 @@ static int pcm3008_soc_probe(struct platform_device *pdev) printk(KERN_INFO "PCM3008 SoC Audio Codec %s\n", PCM3008_VERSION); - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (!socdev->codec) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (!socdev->card->codec) return -ENOMEM; - codec = socdev->codec; + codec = socdev->card->codec; mutex_init(&codec->mutex); codec->name = "PCM3008"; @@ -139,7 +139,7 @@ gpio_err: card_err: snd_soc_free_pcms(socdev); pcm_err: - kfree(socdev->codec); + kfree(socdev->card->codec); return ret; } @@ -147,7 +147,7 @@ pcm_err: static int pcm3008_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct pcm3008_setup_data *setup = socdev->codec_data; if (!codec) @@ -155,7 +155,7 @@ static int pcm3008_soc_remove(struct platform_device *pdev) pcm3008_gpio_free(setup); snd_soc_free_pcms(socdev); - kfree(socdev->codec); + kfree(socdev->card->codec); return 0; } diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index ec7fe3b7b0cb..58e225dadc7e 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -276,7 +276,7 @@ static int ssm2602_hw_params(struct snd_pcm_substream *substream, u16 srate; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct ssm2602_priv *ssm2602 = codec->private_data; struct i2c_client *i2c = codec->control_data; u16 iface = ssm2602_read_reg_cache(codec, SSM2602_IFACE) & 0xfff3; @@ -321,7 +321,7 @@ static int ssm2602_startup(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct ssm2602_priv *ssm2602 = codec->private_data; struct i2c_client *i2c = codec->control_data; struct snd_pcm_runtime *master_runtime; @@ -358,7 +358,7 @@ static int ssm2602_pcm_prepare(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* set active */ ssm2602_write(codec, SSM2602_ACTIVE, ACTIVE_ACTIVATE_CODEC); @@ -370,7 +370,7 @@ static void ssm2602_shutdown(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct ssm2602_priv *ssm2602 = codec->private_data; /* deactivate */ if (!codec->active) @@ -535,7 +535,7 @@ EXPORT_SYMBOL_GPL(ssm2602_dai); static int ssm2602_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; ssm2602_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -544,7 +544,7 @@ static int ssm2602_suspend(struct platform_device *pdev, pm_message_t state) static int ssm2602_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -566,7 +566,7 @@ static int ssm2602_resume(struct platform_device *pdev) */ static int ssm2602_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg, ret = 0; codec->name = "SSM2602"; @@ -639,7 +639,7 @@ static int ssm2602_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = ssm2602_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -733,7 +733,7 @@ static int ssm2602_probe(struct platform_device *pdev) } codec->private_data = ssm2602; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -754,7 +754,7 @@ static int ssm2602_probe(struct platform_device *pdev) static int ssm2602_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) ssm2602_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index a0e47c1dcd64..8b20c360adf5 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -405,7 +405,7 @@ static int tlv320aic23_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 iface_reg; int ret; struct aic23 *aic23 = container_of(codec, struct aic23, codec); @@ -453,7 +453,7 @@ static int tlv320aic23_pcm_prepare(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* set active */ tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0001); @@ -466,7 +466,7 @@ static void tlv320aic23_shutdown(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct aic23 *aic23 = container_of(codec, struct aic23, codec); /* deactivate */ @@ -609,7 +609,7 @@ static int tlv320aic23_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -620,7 +620,7 @@ static int tlv320aic23_suspend(struct platform_device *pdev, static int tlv320aic23_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u16 reg; @@ -642,7 +642,7 @@ static int tlv320aic23_resume(struct platform_device *pdev) */ static int tlv320aic23_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; u16 reg; @@ -729,7 +729,7 @@ static int tlv320aic23_codec_probe(struct i2c_client *i2c, const struct i2c_device_id *i2c_id) { struct snd_soc_device *socdev = tlv320aic23_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -787,7 +787,7 @@ static int tlv320aic23_probe(struct platform_device *pdev) if (aic23 == NULL) return -ENOMEM; codec = &aic23->codec; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -806,7 +806,7 @@ static int tlv320aic23_probe(struct platform_device *pdev) static int tlv320aic23_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct aic23 *aic23 = container_of(codec, struct aic23, codec); if (codec->control_data) diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c index 29f2f1a017fd..229e464cf713 100644 --- a/sound/soc/codecs/tlv320aic26.c +++ b/sound/soc/codecs/tlv320aic26.c @@ -130,7 +130,7 @@ static int aic26_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct aic26 *aic26 = codec->private_data; int fsref, divisor, wlen, pval, jval, dval, qval; u16 reg; @@ -338,7 +338,7 @@ static int aic26_probe(struct platform_device *pdev) return -ENODEV; } codec = &aic26->codec; - socdev->codec = codec; + socdev->card->codec = codec; dev_dbg(&pdev->dev, "Registering PCMs, dev=%p, socdev->dev=%p\n", &pdev->dev, socdev->dev); diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 36ab0198ca3f..ba64b0c617e6 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -727,7 +727,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct aic3x_priv *aic3x = codec->private_data; int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0; u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1; @@ -1079,7 +1079,7 @@ EXPORT_SYMBOL_GPL(aic3x_dai); static int aic3x_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -1089,7 +1089,7 @@ static int aic3x_suspend(struct platform_device *pdev, pm_message_t state) static int aic3x_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u8 *cache = codec->reg_cache; @@ -1112,7 +1112,7 @@ static int aic3x_resume(struct platform_device *pdev) */ static int aic3x_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct aic3x_setup_data *setup = socdev->codec_data; int reg, ret = 0; @@ -1243,7 +1243,7 @@ static int aic3x_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = aic3x_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -1348,7 +1348,7 @@ static int aic3x_probe(struct platform_device *pdev) } codec->private_data = aic3x; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1374,7 +1374,7 @@ static int aic3x_probe(struct platform_device *pdev) static int aic3x_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* power down chip */ if (codec->control_data) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index f530c1e6d9e8..796f34cac85d 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -981,7 +981,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u8 mode, old_mode, format, old_format; @@ -1166,7 +1166,7 @@ EXPORT_SYMBOL_GPL(twl4030_dai); static int twl4030_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -1176,7 +1176,7 @@ static int twl4030_suspend(struct platform_device *pdev, pm_message_t state) static int twl4030_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY); twl4030_set_bias_level(codec, codec->suspend_bias_level); @@ -1190,7 +1190,7 @@ static int twl4030_resume(struct platform_device *pdev) static int twl4030_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; printk(KERN_INFO "TWL4030 Audio Codec init \n"); @@ -1251,7 +1251,7 @@ static int twl4030_probe(struct platform_device *pdev) if (codec == NULL) return -ENOMEM; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1265,7 +1265,7 @@ static int twl4030_probe(struct platform_device *pdev) static int twl4030_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; printk(KERN_INFO "TWL4030 Audio Codec remove\n"); snd_soc_free_pcms(socdev); diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index 277825d155a6..661599295ca7 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -173,7 +173,7 @@ static int uda134x_startup(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct uda134x_priv *uda134x = codec->private_data; struct snd_pcm_runtime *master_runtime; @@ -206,7 +206,7 @@ static void uda134x_shutdown(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct uda134x_priv *uda134x = codec->private_data; if (uda134x->master_substream == substream) @@ -221,7 +221,7 @@ static int uda134x_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct uda134x_priv *uda134x = codec->private_data; u8 hw_params; @@ -492,11 +492,11 @@ static int uda134x_soc_probe(struct platform_device *pdev) return -EINVAL; } - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (socdev->codec == NULL) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (socdev->card->codec == NULL) return ret; - codec = socdev->codec; + codec = socdev->card->codec; uda134x = kzalloc(sizeof(struct uda134x_priv), GFP_KERNEL); if (uda134x == NULL) @@ -584,7 +584,7 @@ priv_err: static int uda134x_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; uda134x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); uda134x_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -604,7 +604,7 @@ static int uda134x_soc_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; uda134x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); uda134x_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -614,7 +614,7 @@ static int uda134x_soc_suspend(struct platform_device *pdev, static int uda134x_soc_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; uda134x_set_bias_level(codec, SND_SOC_BIAS_PREPARE); uda134x_set_bias_level(codec, SND_SOC_BIAS_ON); diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index a957b4365b9d..98e4a6560f06 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -397,7 +397,7 @@ static int uda1380_pcm_prepare(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg, reg_start, reg_end, clk; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { @@ -430,7 +430,7 @@ static int uda1380_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 clk = uda1380_read_reg_cache(codec, UDA1380_CLK); /* set WSPLL power and divider if running from this clock */ @@ -469,7 +469,7 @@ static void uda1380_pcm_shutdown(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 clk = uda1380_read_reg_cache(codec, UDA1380_CLK); /* shut down WSPLL power if running from this clock */ @@ -591,7 +591,7 @@ EXPORT_SYMBOL_GPL(uda1380_dai); static int uda1380_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -600,7 +600,7 @@ static int uda1380_suspend(struct platform_device *pdev, pm_message_t state) static int uda1380_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -622,7 +622,7 @@ static int uda1380_resume(struct platform_device *pdev) */ static int uda1380_init(struct snd_soc_device *socdev, int dac_clk) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; codec->name = "UDA1380"; @@ -688,7 +688,7 @@ static int uda1380_i2c_probe(struct i2c_client *i2c, { struct snd_soc_device *socdev = uda1380_socdev; struct uda1380_setup_data *setup = socdev->codec_data; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -779,7 +779,7 @@ static int uda1380_probe(struct platform_device *pdev) if (codec == NULL) return -ENOMEM; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -803,7 +803,7 @@ static int uda1380_probe(struct platform_device *pdev) static int uda1380_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 2e0db29b4998..75d3438ccb87 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1301,7 +1301,7 @@ static int wm8350_set_bias_level(struct snd_soc_codec *codec, static int wm8350_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8350_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -1310,7 +1310,7 @@ static int wm8350_suspend(struct platform_device *pdev, pm_message_t state) static int wm8350_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8350_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -1423,8 +1423,8 @@ static int wm8350_probe(struct platform_device *pdev) BUG_ON(!wm8350_codec); - socdev->codec = wm8350_codec; - codec = socdev->codec; + socdev->card->codec = wm8350_codec; + codec = socdev->card->codec; wm8350 = codec->control_data; priv = codec->private_data; @@ -1498,7 +1498,7 @@ card_err: static int wm8350_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8350 *wm8350 = codec->control_data; struct wm8350_data *priv = codec->private_data; int ret; diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index abe7cce87714..f01078cfbd72 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -452,7 +452,7 @@ static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 iface = wm8510_read_reg_cache(codec, WM8510_IFACE) & 0x19f; u16 adn = wm8510_read_reg_cache(codec, WM8510_ADD) & 0x1f1; @@ -581,7 +581,7 @@ EXPORT_SYMBOL_GPL(wm8510_dai); static int wm8510_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -590,7 +590,7 @@ static int wm8510_suspend(struct platform_device *pdev, pm_message_t state) static int wm8510_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -612,7 +612,7 @@ static int wm8510_resume(struct platform_device *pdev) */ static int wm8510_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; codec->name = "WM8510"; @@ -670,7 +670,7 @@ static int wm8510_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8510_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -751,7 +751,7 @@ err_driver: static int __devinit wm8510_spi_probe(struct spi_device *spi) { struct snd_soc_device *socdev = wm8510_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; codec->control_data = spi; @@ -817,7 +817,7 @@ static int wm8510_probe(struct platform_device *pdev) if (codec == NULL) return -ENOMEM; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -847,7 +847,7 @@ static int wm8510_probe(struct platform_device *pdev) static int wm8510_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 3faf0e70ce10..d3c51ba5e6f9 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -539,7 +539,7 @@ static int wm8580_paif_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->id); paifb &= ~WM8580_AIF_LENGTH_MASK; @@ -816,7 +816,7 @@ EXPORT_SYMBOL_GPL(wm8580_dai); */ static int wm8580_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; codec->name = "WM8580"; @@ -888,7 +888,7 @@ static int wm8580_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8580_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -986,7 +986,7 @@ static int wm8580_probe(struct platform_device *pdev) } codec->private_data = wm8580; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1007,7 +1007,7 @@ static int wm8580_probe(struct platform_device *pdev) static int wm8580_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8580_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c index f90dc52e975d..f8363b308895 100644 --- a/sound/soc/codecs/wm8728.c +++ b/sound/soc/codecs/wm8728.c @@ -137,7 +137,7 @@ static int wm8728_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 dac = wm8728_read_reg_cache(codec, WM8728_DACCTL); dac &= ~0x18; @@ -264,7 +264,7 @@ EXPORT_SYMBOL_GPL(wm8728_dai); static int wm8728_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -274,7 +274,7 @@ static int wm8728_suspend(struct platform_device *pdev, pm_message_t state) static int wm8728_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8728_set_bias_level(codec, codec->suspend_bias_level); @@ -287,7 +287,7 @@ static int wm8728_resume(struct platform_device *pdev) */ static int wm8728_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; codec->name = "WM8728"; @@ -349,7 +349,7 @@ static int wm8728_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8728_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -430,7 +430,7 @@ err_driver: static int __devinit wm8728_spi_probe(struct spi_device *spi) { struct snd_soc_device *socdev = wm8728_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; codec->control_data = spi; @@ -494,7 +494,7 @@ static int wm8728_probe(struct platform_device *pdev) if (codec == NULL) return -ENOMEM; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -527,7 +527,7 @@ static int wm8728_probe(struct platform_device *pdev) static int wm8728_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 96d6e1aeaf43..0150fe53a65d 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -253,7 +253,7 @@ static int wm8731_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8731_priv *wm8731 = codec->private_data; u16 iface = wm8731_read_reg_cache(codec, WM8731_IFACE) & 0xfff3; int i = get_coeff(wm8731->sysclk, params_rate(params)); @@ -283,7 +283,7 @@ static int wm8731_pcm_prepare(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* set active */ wm8731_write(codec, WM8731_ACTIVE, 0x0001); @@ -296,7 +296,7 @@ static void wm8731_shutdown(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* deactivate */ if (!codec->active) { @@ -458,7 +458,7 @@ EXPORT_SYMBOL_GPL(wm8731_dai); static int wm8731_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8731_write(codec, WM8731_ACTIVE, 0x0); wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -468,7 +468,7 @@ static int wm8731_suspend(struct platform_device *pdev, pm_message_t state) static int wm8731_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -490,7 +490,7 @@ static int wm8731_resume(struct platform_device *pdev) */ static int wm8731_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg, ret = 0; codec->name = "WM8731"; @@ -561,7 +561,7 @@ static int wm8731_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8731_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -642,7 +642,7 @@ err_driver: static int __devinit wm8731_spi_probe(struct spi_device *spi) { struct snd_soc_device *socdev = wm8731_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; codec->control_data = spi; @@ -716,7 +716,7 @@ static int wm8731_probe(struct platform_device *pdev) } codec->private_data = wm8731; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -750,7 +750,7 @@ static int wm8731_probe(struct platform_device *pdev) static int wm8731_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 1578569793a2..96afb86addc6 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -604,7 +604,7 @@ static int wm8750_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8750_priv *wm8750 = codec->private_data; u16 iface = wm8750_read_reg_cache(codec, WM8750_IFACE) & 0x1f3; u16 srate = wm8750_read_reg_cache(codec, WM8750_SRATE) & 0x1c0; @@ -712,7 +712,7 @@ static void wm8750_work(struct work_struct *work) static int wm8750_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -721,7 +721,7 @@ static int wm8750_suspend(struct platform_device *pdev, pm_message_t state) static int wm8750_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -754,7 +754,7 @@ static int wm8750_resume(struct platform_device *pdev) */ static int wm8750_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg, ret = 0; codec->name = "WM8750"; @@ -836,7 +836,7 @@ static int wm8750_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8750_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -917,7 +917,7 @@ err_driver: static int __devinit wm8750_spi_probe(struct spi_device *spi) { struct snd_soc_device *socdev = wm8750_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; codec->control_data = spi; @@ -989,7 +989,7 @@ static int wm8750_probe(struct platform_device *pdev) } codec->private_data = wm8750; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1043,7 +1043,7 @@ static int run_delayed_work(struct delayed_work *dwork) static int wm8750_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 5a1c1fca120f..502766dce861 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -912,7 +912,7 @@ static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8753_priv *wm8753 = codec->private_data; u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01f3; u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x017f; @@ -1146,7 +1146,7 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8753_priv *wm8753 = codec->private_data; u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x01c0; u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01f3; @@ -1483,7 +1483,7 @@ static void wm8753_work(struct work_struct *work) static int wm8753_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* we only need to suspend if we are a valid card */ if (!codec->card) @@ -1496,7 +1496,7 @@ static int wm8753_suspend(struct platform_device *pdev, pm_message_t state) static int wm8753_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -1533,7 +1533,7 @@ static int wm8753_resume(struct platform_device *pdev) */ static int wm8753_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg, ret = 0; codec->name = "WM8753"; @@ -1624,7 +1624,7 @@ static int wm8753_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8753_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -1705,7 +1705,7 @@ err_driver: static int __devinit wm8753_spi_probe(struct spi_device *spi) { struct snd_soc_device *socdev = wm8753_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; codec->control_data = spi; @@ -1780,7 +1780,7 @@ static int wm8753_probe(struct platform_device *pdev) } codec->private_data = wm8753; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1832,7 +1832,7 @@ static int run_delayed_work(struct delayed_work *dwork) static int wm8753_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index 1e08d4f065f2..85c0f1bc6766 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -720,7 +720,7 @@ static int wm8900_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 reg; reg = wm8900_read(codec, WM8900_REG_AUDIO1) & ~0x60; @@ -1210,7 +1210,7 @@ static int wm8900_set_bias_level(struct snd_soc_codec *codec, static int wm8900_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8900_priv *wm8900 = codec->private_data; int fll_out = wm8900->fll_out; int fll_in = wm8900->fll_in; @@ -1234,7 +1234,7 @@ static int wm8900_suspend(struct platform_device *pdev, pm_message_t state) static int wm8900_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8900_priv *wm8900 = codec->private_data; u16 *cache; int i, ret; @@ -1414,7 +1414,7 @@ static int wm8900_probe(struct platform_device *pdev) } codec = wm8900_codec; - socdev->codec = codec; + socdev->card->codec = codec; /* Register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 6ff34b957dce..d36b2b1edf19 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -1261,7 +1261,7 @@ static int wm8903_startup(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8903_priv *wm8903 = codec->private_data; struct i2c_client *i2c = codec->control_data; struct snd_pcm_runtime *master_runtime; @@ -1303,7 +1303,7 @@ static void wm8903_shutdown(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8903_priv *wm8903 = codec->private_data; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) @@ -1323,7 +1323,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8903_priv *wm8903 = codec->private_data; struct i2c_client *i2c = codec->control_data; int fs = params_rate(params); @@ -1527,7 +1527,7 @@ EXPORT_SYMBOL_GPL(wm8903_dai); static int wm8903_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -1537,7 +1537,7 @@ static int wm8903_suspend(struct platform_device *pdev, pm_message_t state) static int wm8903_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct i2c_client *i2c = codec->control_data; int i; u16 *reg_cache = codec->reg_cache; @@ -1713,7 +1713,7 @@ static int wm8903_probe(struct platform_device *pdev) goto err; } - socdev->codec = wm8903_codec; + socdev->card->codec = wm8903_codec; /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); @@ -1722,9 +1722,9 @@ static int wm8903_probe(struct platform_device *pdev) goto err; } - snd_soc_add_controls(socdev->codec, wm8903_snd_controls, + snd_soc_add_controls(socdev->card->codec, wm8903_snd_controls, ARRAY_SIZE(wm8903_snd_controls)); - wm8903_add_widgets(socdev->codec); + wm8903_add_widgets(socdev->card->codec); ret = snd_soc_init_card(socdev); if (ret < 0) { @@ -1745,7 +1745,7 @@ err: static int wm8903_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c index c8bd9b06f330..24d4c905a011 100644 --- a/sound/soc/codecs/wm8971.c +++ b/sound/soc/codecs/wm8971.c @@ -531,7 +531,7 @@ static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm8971_priv *wm8971 = codec->private_data; u16 iface = wm8971_read_reg_cache(codec, WM8971_IFACE) & 0x1f3; u16 srate = wm8971_read_reg_cache(codec, WM8971_SRATE) & 0x1c0; @@ -637,7 +637,7 @@ static void wm8971_work(struct work_struct *work) static int wm8971_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -646,7 +646,7 @@ static int wm8971_suspend(struct platform_device *pdev, pm_message_t state) static int wm8971_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -677,7 +677,7 @@ static int wm8971_resume(struct platform_device *pdev) static int wm8971_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg, ret = 0; codec->name = "WM8971"; @@ -758,7 +758,7 @@ static int wm8971_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8971_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -859,7 +859,7 @@ static int wm8971_probe(struct platform_device *pdev) } codec->private_data = wm8971; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -894,7 +894,7 @@ static int wm8971_probe(struct platform_device *pdev) static int wm8971_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index f93c0955ed9d..6af1d399b316 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1162,7 +1162,7 @@ static int wm8990_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 audio1 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_1); audio1 &= ~WM8990_AIF_WL_MASK; @@ -1361,7 +1361,7 @@ EXPORT_SYMBOL_GPL(wm8990_dai); static int wm8990_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; /* we only need to suspend if we are a valid card */ if (!codec->card) @@ -1374,7 +1374,7 @@ static int wm8990_suspend(struct platform_device *pdev, pm_message_t state) static int wm8990_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i; u8 data[2]; u16 *cache = codec->reg_cache; @@ -1402,7 +1402,7 @@ static int wm8990_resume(struct platform_device *pdev) */ static int wm8990_init(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 reg; int ret = 0; @@ -1480,7 +1480,7 @@ static int wm8990_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8990_socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int ret; i2c_set_clientdata(i2c, codec); @@ -1579,7 +1579,7 @@ static int wm8990_probe(struct platform_device *pdev) } codec->private_data = wm8990; - socdev->codec = codec; + socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1605,7 +1605,7 @@ static int wm8990_probe(struct platform_device *pdev) static int wm8990_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec->control_data) wm8990_set_bias_level(codec, SND_SOC_BIAS_OFF); diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index d5c81bb3decb..2e9e06b2daaf 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -249,7 +249,7 @@ static int ac97_prepare(struct snd_pcm_substream *substream, struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg; u16 vra; @@ -323,10 +323,11 @@ static int wm9705_soc_probe(struct platform_device *pdev) printk(KERN_INFO "WM9705 SoC Audio Codec\n"); - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (socdev->codec == NULL) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), + GFP_KERNEL); + if (socdev->card->codec == NULL) return -ENOMEM; - codec = socdev->codec; + codec = socdev->card->codec; mutex_init(&codec->mutex); codec->reg_cache = kmemdup(wm9705_reg, sizeof(wm9705_reg), GFP_KERNEL); @@ -380,15 +381,15 @@ pcm_err: codec_err: kfree(codec->reg_cache); cache_err: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(socdev->card->codec); + socdev->card->codec = NULL; return ret; } static int wm9705_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec == NULL) return 0; diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 4dc90d67530e..b3a8be77676e 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -478,7 +478,7 @@ static int ac97_prepare(struct snd_pcm_substream *substream, struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int reg; u16 vra; @@ -499,7 +499,7 @@ static int ac97_aux_prepare(struct snd_pcm_substream *substream, struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 vra, xsle; vra = ac97_read(codec, AC97_EXTENDED_STATUS); @@ -592,7 +592,7 @@ static int wm9712_soc_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; wm9712_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; @@ -601,7 +601,7 @@ static int wm9712_soc_suspend(struct platform_device *pdev, static int wm9712_soc_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; int i, ret; u16 *cache = codec->reg_cache; @@ -637,10 +637,11 @@ static int wm9712_soc_probe(struct platform_device *pdev) printk(KERN_INFO "WM9711/WM9712 SoC Audio Codec %s\n", WM9712_VERSION); - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (socdev->codec == NULL) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), + GFP_KERNEL); + if (socdev->card->codec == NULL) return -ENOMEM; - codec = socdev->codec; + codec = socdev->card->codec; mutex_init(&codec->mutex); codec->reg_cache = kmemdup(wm9712_reg, sizeof(wm9712_reg), GFP_KERNEL); @@ -704,15 +705,15 @@ codec_err: kfree(codec->reg_cache); cache_err: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(socdev->card->codec); + socdev->card->codec = NULL; return ret; } static int wm9712_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec == NULL) return 0; diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 0e60e16973d4..54db9c524988 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -1115,7 +1115,7 @@ static int wm9713_soc_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; u16 reg; /* Disable everything except touchpanel - that will be handled @@ -1133,7 +1133,7 @@ static int wm9713_soc_suspend(struct platform_device *pdev, static int wm9713_soc_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; struct wm9713_priv *wm9713 = codec->private_data; int i, ret; u16 *cache = codec->reg_cache; @@ -1174,10 +1174,11 @@ static int wm9713_soc_probe(struct platform_device *pdev) printk(KERN_INFO "WM9713/WM9714 SoC Audio Codec %s\n", WM9713_VERSION); - socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (socdev->codec == NULL) + socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec), + GFP_KERNEL); + if (socdev->card->codec == NULL) return -ENOMEM; - codec = socdev->codec; + codec = socdev->card->codec; mutex_init(&codec->mutex); codec->reg_cache = kmemdup(wm9713_reg, sizeof(wm9713_reg), GFP_KERNEL); @@ -1249,15 +1250,15 @@ priv_err: kfree(codec->reg_cache); cache_err: - kfree(socdev->codec); - socdev->codec = NULL; + kfree(socdev->card->codec); + socdev->card->codec = NULL; return ret; } static int wm9713_soc_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; if (codec == NULL) return 0; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8313d52a6e8c..f18c7a3e36d1 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -234,7 +234,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) cpu_dai->capture.active = codec_dai->capture.active = 1; cpu_dai->active = codec_dai->active = 1; cpu_dai->runtime = runtime; - socdev->codec->active++; + card->codec->active++; mutex_unlock(&pcm_mutex); return 0; @@ -264,7 +264,7 @@ static void close_delayed_work(struct work_struct *work) struct snd_soc_card *card = container_of(work, struct snd_soc_card, delayed_work.work); struct snd_soc_device *socdev = card->socdev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = card->codec; struct snd_soc_dai *codec_dai; int i; @@ -319,7 +319,7 @@ static int soc_codec_close(struct snd_pcm_substream *substream) struct snd_soc_platform *platform = card->platform; struct snd_soc_dai *cpu_dai = machine->cpu_dai; struct snd_soc_dai *codec_dai = machine->codec_dai; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = card->codec; mutex_lock(&pcm_mutex); @@ -387,7 +387,7 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) struct snd_soc_platform *platform = card->platform; struct snd_soc_dai *cpu_dai = machine->cpu_dai; struct snd_soc_dai *codec_dai = machine->codec_dai; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = card->codec; int ret = 0; mutex_lock(&pcm_mutex); @@ -553,7 +553,7 @@ static int soc_pcm_hw_free(struct snd_pcm_substream *substream) struct snd_soc_platform *platform = card->platform; struct snd_soc_dai *cpu_dai = machine->cpu_dai; struct snd_soc_dai *codec_dai = machine->codec_dai; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = card->codec; mutex_lock(&pcm_mutex); @@ -629,7 +629,7 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) struct snd_soc_card *card = socdev->card; struct snd_soc_platform *platform = card->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = card->codec; int i; /* Due to the resume being scheduled into a workqueue we could @@ -705,7 +705,7 @@ static void soc_resume_deferred(struct work_struct *work) struct snd_soc_device *socdev = card->socdev; struct snd_soc_platform *platform = card->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = card->codec; struct platform_device *pdev = to_platform_device(socdev->dev); int i; @@ -982,8 +982,8 @@ static struct platform_driver soc_driver = { static int soc_new_pcm(struct snd_soc_device *socdev, struct snd_soc_dai_link *dai_link, int num) { - struct snd_soc_codec *codec = socdev->codec; struct snd_soc_card *card = socdev->card; + struct snd_soc_codec *codec = card->codec; struct snd_soc_platform *platform = card->platform; struct snd_soc_dai *codec_dai = dai_link->codec_dai; struct snd_soc_dai *cpu_dai = dai_link->cpu_dai; @@ -998,7 +998,7 @@ static int soc_new_pcm(struct snd_soc_device *socdev, rtd->dai = dai_link; rtd->socdev = socdev; - codec_dai->codec = socdev->codec; + codec_dai->codec = card->codec; /* check client and interface hw capabilities */ sprintf(new_name, "%s %s-%d", dai_link->stream_name, codec_dai->name, @@ -1048,9 +1048,8 @@ static int soc_new_pcm(struct snd_soc_device *socdev, } /* codec register dump */ -static ssize_t soc_codec_reg_show(struct snd_soc_device *devdata, char *buf) +static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf) { - struct snd_soc_codec *codec = devdata->codec; int i, step = 1, count = 0; if (!codec->reg_cache_size) @@ -1090,7 +1089,7 @@ static ssize_t codec_reg_show(struct device *dev, struct device_attribute *attr, char *buf) { struct snd_soc_device *devdata = dev_get_drvdata(dev); - return soc_codec_reg_show(devdata, buf); + return soc_codec_reg_show(devdata->card->codec, buf); } static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL); @@ -1107,12 +1106,10 @@ static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf, { ssize_t ret; struct snd_soc_codec *codec = file->private_data; - struct device *card_dev = codec->card->dev; - struct snd_soc_device *devdata = card_dev->driver_data; char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; - ret = soc_codec_reg_show(devdata, buf); + ret = soc_codec_reg_show(codec, buf); if (ret >= 0) ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); kfree(buf); @@ -1309,8 +1306,8 @@ EXPORT_SYMBOL_GPL(snd_soc_test_bits); */ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid) { - struct snd_soc_codec *codec = socdev->codec; struct snd_soc_card *card = socdev->card; + struct snd_soc_codec *codec = card->codec; int ret = 0, i; mutex_lock(&codec->mutex); @@ -1355,8 +1352,8 @@ EXPORT_SYMBOL_GPL(snd_soc_new_pcms); */ int snd_soc_init_card(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; struct snd_soc_card *card = socdev->card; + struct snd_soc_codec *codec = card->codec; int ret = 0, i, ac97 = 0, err = 0; for (i = 0; i < card->num_links; i++) { @@ -1404,7 +1401,7 @@ int snd_soc_init_card(struct snd_soc_device *socdev) if (err < 0) printk(KERN_WARNING "asoc: failed to add codec sysfs files\n"); - soc_init_codec_debugfs(socdev->codec); + soc_init_codec_debugfs(codec); mutex_unlock(&codec->mutex); out: @@ -1421,14 +1418,14 @@ EXPORT_SYMBOL_GPL(snd_soc_init_card); */ void snd_soc_free_pcms(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; #ifdef CONFIG_SND_SOC_AC97_BUS struct snd_soc_dai *codec_dai; int i; #endif mutex_lock(&codec->mutex); - soc_cleanup_codec_debugfs(socdev->codec); + soc_cleanup_codec_debugfs(codec); #ifdef CONFIG_SND_SOC_AC97_BUS for (i = 0; i < codec->num_dai; i++) { codec_dai = &codec->dai[i]; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 54b4564b82b4..f4a8753c84c0 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -817,7 +817,7 @@ static ssize_t dapm_widget_show(struct device *dev, struct device_attribute *attr, char *buf) { struct snd_soc_device *devdata = dev_get_drvdata(dev); - struct snd_soc_codec *codec = devdata->codec; + struct snd_soc_codec *codec = devdata->card->codec; struct snd_soc_dapm_widget *w; int count = 0; char *state = "not set"; @@ -1552,8 +1552,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event); int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, enum snd_soc_bias_level level) { - struct snd_soc_codec *codec = socdev->codec; struct snd_soc_card *card = socdev->card; + struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; if (card->set_bias_level) @@ -1645,7 +1645,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status); */ void snd_soc_dapm_free(struct snd_soc_device *socdev) { - struct snd_soc_codec *codec = socdev->codec; + struct snd_soc_codec *codec = socdev->card->codec; snd_soc_dapm_sys_remove(socdev->dev); dapm_free_widgets(codec); diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 8cc00c3cdf34..ab64a30bedde 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -34,7 +34,7 @@ int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type, jack->card = card; INIT_LIST_HEAD(&jack->pins); - return snd_jack_new(card->socdev->codec->card, id, type, &jack->jack); + return snd_jack_new(card->codec->card, id, type, &jack->jack); } EXPORT_SYMBOL_GPL(snd_soc_jack_new); @@ -54,7 +54,7 @@ EXPORT_SYMBOL_GPL(snd_soc_jack_new); */ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) { - struct snd_soc_codec *codec = jack->card->socdev->codec; + struct snd_soc_codec *codec = jack->card->codec; struct snd_soc_jack_pin *pin; int enable; int oldstatus; -- cgit v1.2.3 From b9d710b3c530ed91e8683933fe94c7605d175bf5 Mon Sep 17 00:00:00 2001 From: Andreas Bergmeier Date: Sat, 24 Jan 2009 12:15:14 +0100 Subject: ALSA: usbaudio - use printf format instead of hardcoding it Rather use printf format instead of hardcoding prefix like 0x. A next step would be to predefine certain formats. Signed-off-by: Andreas Bergmeier Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 44485b29f675..4636926d12d7 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1280,14 +1280,14 @@ static int init_usb_sample_rate(struct usb_device *dev, int iface, if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR, USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT, SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) { - snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep 0x%x\n", + snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n", dev->devnum, iface, fmt->altsetting, rate, ep); return err; } if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), GET_CUR, USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN, SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) { - snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep 0x%x\n", + snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n", dev->devnum, iface, fmt->altsetting, ep); return 0; /* some devices don't support reading */ } @@ -1456,7 +1456,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, channels = params_channels(hw_params); fmt = find_format(subs, format, rate, channels); if (!fmt) { - snd_printd(KERN_DEBUG "cannot set format: format = 0x%x, rate = %d, channels = %d\n", + snd_printd(KERN_DEBUG "cannot set format: format = %#x, rate = %d, channels = %d\n", format, rate, channels); return -EINVAL; } @@ -2148,7 +2148,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s fp = list_entry(p, struct audioformat, list); snd_iprintf(buffer, " Interface %d\n", fp->iface); snd_iprintf(buffer, " Altset %d\n", fp->altsetting); - snd_iprintf(buffer, " Format: 0x%x\n", fp->format); + snd_iprintf(buffer, " Format: %#x\n", fp->format); snd_iprintf(buffer, " Channels: %d\n", fp->channels); snd_iprintf(buffer, " Endpoint: %d %s (%s)\n", fp->endpoint & USB_ENDPOINT_NUMBER_MASK, @@ -2168,7 +2168,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s snd_iprintf(buffer, "\n"); } // snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize); - // snd_iprintf(buffer, " EP Attribute = 0x%x\n", fp->attributes); + // snd_iprintf(buffer, " EP Attribute = %#x\n", fp->attributes); } } @@ -2607,7 +2607,7 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip, struct audioformat fp->format = SNDRV_PCM_FORMAT_MPEG; break; default: - snd_printd(KERN_INFO "%d:%u:%d : unknown format tag 0x%x is detected. processed as MPEG.\n", + snd_printd(KERN_INFO "%d:%u:%d : unknown format tag %#x is detected. processed as MPEG.\n", chip->dev->devnum, fp->iface, fp->altsetting, format); fp->format = SNDRV_PCM_FORMAT_MPEG; break; @@ -2805,7 +2805,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) continue; } - snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint 0x%x\n", dev->devnum, iface_no, altno, fp->endpoint); + snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint); err = add_audio_endpoint(chip, stream, fp); if (err < 0) { kfree(fp->rate_table); -- cgit v1.2.3 From 3fc93030e5a792fdd0da3321487f5cbfd1143c2b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 27 Jan 2009 11:29:39 +0200 Subject: ASoC: TWL4030: Syncronize the reg_cache for ANAMICL after the offset cancelation The offset cancelation bit in ANAMICL register is self cleanig. Make sure that the reg_cache holds the same value as the HW register. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 796f34cac85d..24419afd319e 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -913,6 +913,9 @@ static void twl4030_power_up(struct snd_soc_codec *codec) ((byte & TWL4030_CNCL_OFFSET_START) == TWL4030_CNCL_OFFSET_START)); + /* Make sure that the reg_cache has the same value as the HW */ + twl4030_write_reg_cache(codec, TWL4030_REG_ANAMICL, byte); + /* anti-pop when changing analog gain */ regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1); twl4030_write(codec, TWL4030_REG_MISC_SET_1, -- cgit v1.2.3 From db04e2c58a65364218b89f1372b4b3b78d206423 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 27 Jan 2009 11:29:40 +0200 Subject: ASoC: TWL4030: Code clean up for codec power up and down Merge the codec up and down functions to a simple one. Codec is powered down by default (reg_cache change). Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 43 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 26 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 24419afd319e..af7b433d4f53 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -42,7 +42,7 @@ */ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { 0x00, /* this register not used */ - 0x93, /* REG_CODEC_MODE (0x1) */ + 0x91, /* REG_CODEC_MODE (0x1) */ 0xc3, /* REG_OPTION (0x2) */ 0x00, /* REG_UNKNOWN (0x3) */ 0x00, /* REG_MICBIAS_CTL (0x4) */ @@ -154,26 +154,17 @@ static int twl4030_write(struct snd_soc_codec *codec, return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg); } -static void twl4030_clear_codecpdz(struct snd_soc_codec *codec) +static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable) { u8 mode; mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE); - twl4030_write(codec, TWL4030_REG_CODEC_MODE, - mode & ~TWL4030_CODECPDZ); + if (enable) + mode |= TWL4030_CODECPDZ; + else + mode &= ~TWL4030_CODECPDZ; - /* REVISIT: this delay is present in TI sample drivers */ - /* but there seems to be no TRM requirement for it */ - udelay(10); -} - -static void twl4030_set_codecpdz(struct snd_soc_codec *codec) -{ - u8 mode; - - mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE); - twl4030_write(codec, TWL4030_REG_CODEC_MODE, - mode | TWL4030_CODECPDZ); + twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode); /* REVISIT: this delay is present in TI sample drivers */ /* but there seems to be no TRM requirement for it */ @@ -185,7 +176,7 @@ static void twl4030_init_chip(struct snd_soc_codec *codec) int i; /* clear CODECPDZ prior to setting register defaults */ - twl4030_clear_codecpdz(codec); + twl4030_codec_enable(codec, 0); /* set all audio section registers to reasonable defaults */ for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++) @@ -895,7 +886,7 @@ static void twl4030_power_up(struct snd_soc_codec *codec) int i = 0; /* set CODECPDZ to turn on codec */ - twl4030_set_codecpdz(codec); + twl4030_codec_enable(codec, 1); /* initiate offset cancellation */ anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL); @@ -922,8 +913,8 @@ static void twl4030_power_up(struct snd_soc_codec *codec) regmisc1 | TWL4030_SMOOTH_ANAVOL_EN); /* toggle CODECPDZ as per TRM */ - twl4030_clear_codecpdz(codec); - twl4030_set_codecpdz(codec); + twl4030_codec_enable(codec, 0); + twl4030_codec_enable(codec, 1); /* program anti-pop with bias ramp delay */ popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); @@ -952,7 +943,7 @@ static void twl4030_power_down(struct snd_soc_codec *codec) twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); /* power down */ - twl4030_clear_codecpdz(codec); + twl4030_codec_enable(codec, 0); } static int twl4030_set_bias_level(struct snd_soc_codec *codec, @@ -1030,7 +1021,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, if (mode != old_mode) { /* change rate and set CODECPDZ */ twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode); - twl4030_set_codecpdz(codec); + twl4030_codec_enable(codec, 1); } /* sample size */ @@ -1053,13 +1044,13 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, if (format != old_format) { /* clear CODECPDZ before changing format (codec requirement) */ - twl4030_clear_codecpdz(codec); + twl4030_codec_enable(codec, 0); /* change format */ twl4030_write(codec, TWL4030_REG_AUDIO_IF, format); /* set CODECPDZ afterwards */ - twl4030_set_codecpdz(codec); + twl4030_codec_enable(codec, 1); } return 0; } @@ -1129,13 +1120,13 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai, if (format != old_format) { /* clear CODECPDZ before changing format (codec requirement) */ - twl4030_clear_codecpdz(codec); + twl4030_codec_enable(codec, 0); /* change format */ twl4030_write(codec, TWL4030_REG_AUDIO_IF, format); /* set CODECPDZ afterwards */ - twl4030_set_codecpdz(codec); + twl4030_codec_enable(codec, 1); } return 0; -- cgit v1.2.3 From aad749e51a66d473f5cef4a050e3e36795261be3 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 27 Jan 2009 11:29:41 +0200 Subject: ASoC: TWL4030: Enable Headset Left anti-pop/bias ramp only if the Headset Left is in use The Headset Left anti-pop and bias ramp does not need to be enabled, if the headset is not in use. Move the code to DAPM event handler for HeadsetL. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 71 +++++++++++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 26 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index af7b433d4f53..900486ef633d 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -414,6 +414,47 @@ static int handsfree_event(struct snd_soc_dapm_widget *w, return 0; } +static int headsetl_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + unsigned char hs_gain, hs_pop; + + /* Save the current volume */ + hs_gain = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_GAIN_SET); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* Do the anti-pop/bias ramp enable according to the TRM */ + hs_pop = TWL4030_RAMP_DELAY_645MS; + twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + hs_pop |= TWL4030_VMID_EN; + twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + /* Is this needed? Can we just use whatever gain here? */ + twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, + (hs_gain & (~0x0f)) | 0x0a); + hs_pop |= TWL4030_RAMP_EN; + twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + + /* Restore the original volume */ + twl4030_write(w->codec, TWL4030_REG_HS_GAIN_SET, hs_gain); + break; + case SND_SOC_DAPM_POST_PMD: + /* Do the anti-pop/bias ramp disable according to the TRM */ + hs_pop = twl4030_read_reg_cache(w->codec, + TWL4030_REG_HS_POPN_SET); + hs_pop &= ~TWL4030_RAMP_EN; + twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + /* Bypass the reg_cache to mute the headset */ + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + hs_gain & (~0x0f), + TWL4030_REG_HS_GAIN_SET); + hs_pop &= ~TWL4030_VMID_EN; + twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); + break; + } + return 0; +} + /* * Some of the gain controls in TWL (mostly those which are associated with * the outputs) are implemented in an interesting way: @@ -720,8 +761,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0, &twl4030_dapm_predriver_control), /* HeadsetL/R */ - SND_SOC_DAPM_MUX("HeadsetL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_hsol_control), + SND_SOC_DAPM_MUX_E("HeadsetL Mux", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_hsol_control, headsetl_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0, &twl4030_dapm_hsor_control), /* CarkitL/R */ @@ -882,7 +924,7 @@ static int twl4030_add_widgets(struct snd_soc_codec *codec) static void twl4030_power_up(struct snd_soc_codec *codec) { - u8 anamicl, regmisc1, byte, popn; + u8 anamicl, regmisc1, byte; int i = 0; /* set CODECPDZ to turn on codec */ @@ -915,33 +957,10 @@ static void twl4030_power_up(struct snd_soc_codec *codec) /* toggle CODECPDZ as per TRM */ twl4030_codec_enable(codec, 0); twl4030_codec_enable(codec, 1); - - /* program anti-pop with bias ramp delay */ - popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); - popn &= TWL4030_RAMP_DELAY; - popn |= TWL4030_RAMP_DELAY_645MS; - twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); - popn |= TWL4030_VMID_EN; - twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); - - /* enable anti-pop ramp */ - popn |= TWL4030_RAMP_EN; - twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); } static void twl4030_power_down(struct snd_soc_codec *codec) { - u8 popn; - - /* disable anti-pop ramp */ - popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); - popn &= ~TWL4030_RAMP_EN; - twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); - - /* disable bias out */ - popn &= ~TWL4030_VMID_EN; - twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); - /* power down */ twl4030_codec_enable(codec, 0); } -- cgit v1.2.3 From fb2a2f84908460c18c3894963990518b224dd9ff Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 27 Jan 2009 11:29:42 +0200 Subject: ASoC: TWL4030: Physical ADC and amplifier power switch change Change the power switches for the physical ADC and for the amplifiers for the analog capture path to map more closely the actual path inside of the codec. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 900486ef633d..8fe059e3e9ab 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -802,16 +802,16 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD| SND_SOC_DAPM_POST_REG), - /* Analog input muxes with power switch for the physical ADCL/R */ + /* Analog input muxes with switch for the capture amplifiers */ SND_SOC_DAPM_VALUE_MUX("Analog Left Capture Route", - TWL4030_REG_AVADC_CTL, 3, 0, &twl4030_dapm_analoglmic_control), + TWL4030_REG_ANAMICL, 4, 0, &twl4030_dapm_analoglmic_control), SND_SOC_DAPM_VALUE_MUX("Analog Right Capture Route", - TWL4030_REG_AVADC_CTL, 1, 0, &twl4030_dapm_analogrmic_control), + TWL4030_REG_ANAMICR, 4, 0, &twl4030_dapm_analogrmic_control), - SND_SOC_DAPM_PGA("Analog Left Amplifier", - TWL4030_REG_ANAMICL, 4, 0, NULL, 0), - SND_SOC_DAPM_PGA("Analog Right Amplifier", - TWL4030_REG_ANAMICR, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("ADC Physical Left", + TWL4030_REG_AVADC_CTL, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("ADC Physical Right", + TWL4030_REG_AVADC_CTL, 1, 0, NULL, 0), SND_SOC_DAPM_PGA("Digimic0 Enable", TWL4030_REG_ADCMICSEL, 1, 0, NULL, 0), @@ -885,23 +885,23 @@ static const struct snd_soc_dapm_route intercon[] = { {"Analog Right Capture Route", "Sub mic", "SUBMIC"}, {"Analog Right Capture Route", "AUXR", "AUXR"}, - {"Analog Left Amplifier", NULL, "Analog Left Capture Route"}, - {"Analog Right Amplifier", NULL, "Analog Right Capture Route"}, + {"ADC Physical Left", NULL, "Analog Left Capture Route"}, + {"ADC Physical Right", NULL, "Analog Right Capture Route"}, {"Digimic0 Enable", NULL, "DIGIMIC0"}, {"Digimic1 Enable", NULL, "DIGIMIC1"}, /* TX1 Left capture path */ - {"TX1 Capture Route", "Analog", "Analog Left Amplifier"}, + {"TX1 Capture Route", "Analog", "ADC Physical Left"}, {"TX1 Capture Route", "Digimic0", "Digimic0 Enable"}, /* TX1 Right capture path */ - {"TX1 Capture Route", "Analog", "Analog Right Amplifier"}, + {"TX1 Capture Route", "Analog", "ADC Physical Right"}, {"TX1 Capture Route", "Digimic0", "Digimic0 Enable"}, /* TX2 Left capture path */ - {"TX2 Capture Route", "Analog", "Analog Left Amplifier"}, + {"TX2 Capture Route", "Analog", "ADC Physical Left"}, {"TX2 Capture Route", "Digimic1", "Digimic1 Enable"}, /* TX2 Right capture path */ - {"TX2 Capture Route", "Analog", "Analog Right Amplifier"}, + {"TX2 Capture Route", "Analog", "ADC Physical Right"}, {"TX2 Capture Route", "Digimic1", "Digimic1 Enable"}, {"ADC Virtual Left1", NULL, "TX1 Capture Route"}, -- cgit v1.2.3 From 006f367e38fb45e2f161c0f500c74449ae63e866 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 27 Jan 2009 11:29:43 +0200 Subject: ASoC: TWL4030: Move the twl4030_power_up and _power_down function Move the twl4030_power_up and twl4030_power_down function earlier to facilitate the analog bypass implementation. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 85 +++++++++++++++++++++++----------------------- 1 file changed, 42 insertions(+), 43 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 8fe059e3e9ab..f985bef40a39 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -184,6 +184,48 @@ static void twl4030_init_chip(struct snd_soc_codec *codec) } +static void twl4030_power_up(struct snd_soc_codec *codec) +{ + u8 anamicl, regmisc1, byte; + int i = 0; + + /* set CODECPDZ to turn on codec */ + twl4030_codec_enable(codec, 1); + + /* initiate offset cancellation */ + anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL); + twl4030_write(codec, TWL4030_REG_ANAMICL, + anamicl | TWL4030_CNCL_OFFSET_START); + + /* wait for offset cancellation to complete */ + do { + /* this takes a little while, so don't slam i2c */ + udelay(2000); + twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, + TWL4030_REG_ANAMICL); + } while ((i++ < 100) && + ((byte & TWL4030_CNCL_OFFSET_START) == + TWL4030_CNCL_OFFSET_START)); + + /* Make sure that the reg_cache has the same value as the HW */ + twl4030_write_reg_cache(codec, TWL4030_REG_ANAMICL, byte); + + /* anti-pop when changing analog gain */ + regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1); + twl4030_write(codec, TWL4030_REG_MISC_SET_1, + regmisc1 | TWL4030_SMOOTH_ANAVOL_EN); + + /* toggle CODECPDZ as per TRM */ + twl4030_codec_enable(codec, 0); + twl4030_codec_enable(codec, 1); +} + +static void twl4030_power_down(struct snd_soc_codec *codec) +{ + /* power down */ + twl4030_codec_enable(codec, 0); +} + /* Earpiece */ static const char *twl4030_earpiece_texts[] = {"Off", "DACL1", "DACL2", "DACR1"}; @@ -922,49 +964,6 @@ static int twl4030_add_widgets(struct snd_soc_codec *codec) return 0; } -static void twl4030_power_up(struct snd_soc_codec *codec) -{ - u8 anamicl, regmisc1, byte; - int i = 0; - - /* set CODECPDZ to turn on codec */ - twl4030_codec_enable(codec, 1); - - /* initiate offset cancellation */ - anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL); - twl4030_write(codec, TWL4030_REG_ANAMICL, - anamicl | TWL4030_CNCL_OFFSET_START); - - - /* wait for offset cancellation to complete */ - do { - /* this takes a little while, so don't slam i2c */ - udelay(2000); - twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, - TWL4030_REG_ANAMICL); - } while ((i++ < 100) && - ((byte & TWL4030_CNCL_OFFSET_START) == - TWL4030_CNCL_OFFSET_START)); - - /* Make sure that the reg_cache has the same value as the HW */ - twl4030_write_reg_cache(codec, TWL4030_REG_ANAMICL, byte); - - /* anti-pop when changing analog gain */ - regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1); - twl4030_write(codec, TWL4030_REG_MISC_SET_1, - regmisc1 | TWL4030_SMOOTH_ANAVOL_EN); - - /* toggle CODECPDZ as per TRM */ - twl4030_codec_enable(codec, 0); - twl4030_codec_enable(codec, 1); -} - -static void twl4030_power_down(struct snd_soc_codec *codec) -{ - /* power down */ - twl4030_codec_enable(codec, 0); -} - static int twl4030_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { -- cgit v1.2.3 From f6c6383502751ceb6f2f3579ad22578ca44f91f5 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 24 Jan 2009 13:35:28 +0100 Subject: ALSA: Turtle Beach Multisound Classic/Pinnacle driver This is driver for Turtle Beach Multisound cards: Classic, Fiji and Pinnacle. Tested pcm playback and recording and MIDI playback on Multisound Pinnacle. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 31 + sound/isa/msnd/Makefile | 9 + sound/isa/msnd/msnd.c | 702 +++++++++++++++++++ sound/isa/msnd/msnd.h | 308 +++++++++ sound/isa/msnd/msnd_classic.c | 3 + sound/isa/msnd/msnd_classic.h | 129 ++++ sound/isa/msnd/msnd_midi.c | 180 +++++ sound/isa/msnd/msnd_pinnacle.c | 1235 ++++++++++++++++++++++++++++++++++ sound/isa/msnd/msnd_pinnacle.h | 181 +++++ sound/isa/msnd/msnd_pinnacle_mixer.c | 343 ++++++++++ 10 files changed, 3121 insertions(+) create mode 100644 sound/isa/msnd/Makefile create mode 100644 sound/isa/msnd/msnd.c create mode 100644 sound/isa/msnd/msnd.h create mode 100644 sound/isa/msnd/msnd_classic.c create mode 100644 sound/isa/msnd/msnd_classic.h create mode 100644 sound/isa/msnd/msnd_midi.c create mode 100644 sound/isa/msnd/msnd_pinnacle.c create mode 100644 sound/isa/msnd/msnd_pinnacle.h create mode 100644 sound/isa/msnd/msnd_pinnacle_mixer.c diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index ce0aa044e274..a74725950b02 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -411,5 +411,36 @@ config SND_WAVEFRONT_FIRMWARE_IN_KERNEL you need to install the firmware files from the alsa-firmware package. +config SND_MSND_PINNACLE + tristate "Turtle Beach MultiSound Pinnacle/Fiji driver" + depends on X86 && EXPERIMENTAL + select FW_LOADER + select SND_MPU401_UART + select SND_PCM + help + Say Y to include support for Turtle Beach MultiSound Pinnacle/ + Fiji soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-msnd-pinnacle. + +config SND_MSND_CLASSIC + tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" + depends on X86 && EXPERIMENTAL + select FW_LOADER + select SND_MPU401_UART + select SND_PCM + help + Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or + Monterey (not for the Pinnacle or Fiji). + + See for important information + about this driver. Note that it has been discontinued, but the + Voyetra Turtle Beach knowledge base entry for it is still available + at . + + To compile this driver as a module, choose M here: the module + will be called snd-msnd-classic. + endif # SND_ISA diff --git a/sound/isa/msnd/Makefile b/sound/isa/msnd/Makefile new file mode 100644 index 000000000000..2171c0aa2f62 --- /dev/null +++ b/sound/isa/msnd/Makefile @@ -0,0 +1,9 @@ + +snd-msnd-lib-objs := msnd.o msnd_midi.o msnd_pinnacle_mixer.o +snd-msnd-pinnacle-objs := msnd_pinnacle.o +snd-msnd-classic-objs := msnd_classic.o + +# Toplevel Module Dependency +obj-$(CONFIG_SND_MSND_PINNACLE) += snd-msnd-pinnacle.o snd-msnd-lib.o +obj-$(CONFIG_SND_MSND_CLASSIC) += snd-msnd-classic.o snd-msnd-lib.o + diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c new file mode 100644 index 000000000000..264e08212c69 --- /dev/null +++ b/sound/isa/msnd/msnd.c @@ -0,0 +1,702 @@ +/********************************************************************* + * + * 2002/06/30 Karsten Wiese: + * removed kernel-version dependencies. + * ripped from linux kernel 2.4.18 (OSS Implementation) by me. + * In the OSS Version, this file is compiled to a separate MODULE, + * that is used by the pinnacle and the classic driver. + * since there is no classic driver for alsa yet (i dont have a classic + * & writing one blindfold is difficult) this file's object is statically + * linked into the pinnacle-driver-module for now. look for the string + * "uncomment this to make this a module again" + * to do guess what. + * + * the following is a copy of the 2.4.18 OSS FREE file-heading comment: + * + * msnd.c - Driver Base + * + * Turtle Beach MultiSound Sound Card Driver for Linux + * + * Copyright (C) 1998 Andrew Veliath + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ********************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "msnd.h" + +#define LOGNAME "msnd" + + +void snd_msnd_init_queue(void *base, int start, int size) +{ + writew(PCTODSP_BASED(start), base + JQS_wStart); + writew(PCTODSP_OFFSET(size) - 1, base + JQS_wSize); + writew(0, base + JQS_wHead); + writew(0, base + JQS_wTail); +} +EXPORT_SYMBOL(snd_msnd_init_queue); + +static int snd_msnd_wait_TXDE(struct snd_msnd *dev) +{ + unsigned int io = dev->io; + int timeout = 1000; + + while (timeout-- > 0) + if (inb(io + HP_ISR) & HPISR_TXDE) + return 0; + + return -EIO; +} + +static int snd_msnd_wait_HC0(struct snd_msnd *dev) +{ + unsigned int io = dev->io; + int timeout = 1000; + + while (timeout-- > 0) + if (!(inb(io + HP_CVR) & HPCVR_HC)) + return 0; + + return -EIO; +} + +int snd_msnd_send_dsp_cmd(struct snd_msnd *dev, u8 cmd) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + if (snd_msnd_wait_HC0(dev) == 0) { + outb(cmd, dev->io + HP_CVR); + spin_unlock_irqrestore(&dev->lock, flags); + return 0; + } + spin_unlock_irqrestore(&dev->lock, flags); + + snd_printd(KERN_ERR LOGNAME ": Send DSP command timeout\n"); + + return -EIO; +} +EXPORT_SYMBOL(snd_msnd_send_dsp_cmd); + +int snd_msnd_send_word(struct snd_msnd *dev, unsigned char high, + unsigned char mid, unsigned char low) +{ + unsigned int io = dev->io; + + if (snd_msnd_wait_TXDE(dev) == 0) { + outb(high, io + HP_TXH); + outb(mid, io + HP_TXM); + outb(low, io + HP_TXL); + return 0; + } + + snd_printd(KERN_ERR LOGNAME ": Send host word timeout\n"); + + return -EIO; +} +EXPORT_SYMBOL(snd_msnd_send_word); + +int snd_msnd_upload_host(struct snd_msnd *dev, const u8 *bin, int len) +{ + int i; + + if (len % 3 != 0) { + snd_printk(KERN_ERR LOGNAME + ": Upload host data not multiple of 3!\n"); + return -EINVAL; + } + + for (i = 0; i < len; i += 3) + if (snd_msnd_send_word(dev, bin[i], bin[i + 1], bin[i + 2])) + return -EIO; + + inb(dev->io + HP_RXL); + inb(dev->io + HP_CVR); + + return 0; +} +EXPORT_SYMBOL(snd_msnd_upload_host); + +int snd_msnd_enable_irq(struct snd_msnd *dev) +{ + unsigned long flags; + + if (dev->irq_ref++) + return 0; + + snd_printdd(LOGNAME ": Enabling IRQ\n"); + + spin_lock_irqsave(&dev->lock, flags); + if (snd_msnd_wait_TXDE(dev) == 0) { + outb(inb(dev->io + HP_ICR) | HPICR_TREQ, dev->io + HP_ICR); + if (dev->type == msndClassic) + outb(dev->irqid, dev->io + HP_IRQM); + + outb(inb(dev->io + HP_ICR) & ~HPICR_TREQ, dev->io + HP_ICR); + outb(inb(dev->io + HP_ICR) | HPICR_RREQ, dev->io + HP_ICR); + enable_irq(dev->irq); + snd_msnd_init_queue(dev->DSPQ, dev->dspq_data_buff, + dev->dspq_buff_size); + spin_unlock_irqrestore(&dev->lock, flags); + return 0; + } + spin_unlock_irqrestore(&dev->lock, flags); + + snd_printd(KERN_ERR LOGNAME ": Enable IRQ failed\n"); + + return -EIO; +} +EXPORT_SYMBOL(snd_msnd_enable_irq); + +int snd_msnd_disable_irq(struct snd_msnd *dev) +{ + unsigned long flags; + + if (--dev->irq_ref > 0) + return 0; + + if (dev->irq_ref < 0) + snd_printd(KERN_WARNING LOGNAME ": IRQ ref count is %d\n", + dev->irq_ref); + + snd_printdd(LOGNAME ": Disabling IRQ\n"); + + spin_lock_irqsave(&dev->lock, flags); + if (snd_msnd_wait_TXDE(dev) == 0) { + outb(inb(dev->io + HP_ICR) & ~HPICR_RREQ, dev->io + HP_ICR); + if (dev->type == msndClassic) + outb(HPIRQ_NONE, dev->io + HP_IRQM); + disable_irq(dev->irq); + spin_unlock_irqrestore(&dev->lock, flags); + return 0; + } + spin_unlock_irqrestore(&dev->lock, flags); + + snd_printd(KERN_ERR LOGNAME ": Disable IRQ failed\n"); + + return -EIO; +} +EXPORT_SYMBOL(snd_msnd_disable_irq); + +static inline long get_play_delay_jiffies(struct snd_msnd *chip, long size) +{ + long tmp = (size * HZ * chip->play_sample_size) / 8; + return tmp / (chip->play_sample_rate * chip->play_channels); +} + +static void snd_msnd_dsp_write_flush(struct snd_msnd *chip) +{ + if (!(chip->mode & FMODE_WRITE) || !test_bit(F_WRITING, &chip->flags)) + return; + set_bit(F_WRITEFLUSH, &chip->flags); +/* interruptible_sleep_on_timeout( + &chip->writeflush, + get_play_delay_jiffies(&chip, chip->DAPF.len));*/ + clear_bit(F_WRITEFLUSH, &chip->flags); + if (!signal_pending(current)) + schedule_timeout_interruptible( + get_play_delay_jiffies(chip, chip->play_period_bytes)); + clear_bit(F_WRITING, &chip->flags); +} + +void snd_msnd_dsp_halt(struct snd_msnd *chip, struct file *file) +{ + if ((file ? file->f_mode : chip->mode) & FMODE_READ) { + clear_bit(F_READING, &chip->flags); + snd_msnd_send_dsp_cmd(chip, HDEX_RECORD_STOP); + snd_msnd_disable_irq(chip); + if (file) { + snd_printd(KERN_INFO LOGNAME + ": Stopping read for %p\n", file); + chip->mode &= ~FMODE_READ; + } + clear_bit(F_AUDIO_READ_INUSE, &chip->flags); + } + if ((file ? file->f_mode : chip->mode) & FMODE_WRITE) { + if (test_bit(F_WRITING, &chip->flags)) { + snd_msnd_dsp_write_flush(chip); + snd_msnd_send_dsp_cmd(chip, HDEX_PLAY_STOP); + } + snd_msnd_disable_irq(chip); + if (file) { + snd_printd(KERN_INFO + LOGNAME ": Stopping write for %p\n", file); + chip->mode &= ~FMODE_WRITE; + } + clear_bit(F_AUDIO_WRITE_INUSE, &chip->flags); + } +} +EXPORT_SYMBOL(snd_msnd_dsp_halt); + + +int snd_msnd_DARQ(struct snd_msnd *chip, int bank) +{ + int /*size, n,*/ timeout = 3; + u16 wTmp; + /* void *DAQD; */ + + /* Increment the tail and check for queue wrap */ + wTmp = readw(chip->DARQ + JQS_wTail) + PCTODSP_OFFSET(DAQDS__size); + if (wTmp > readw(chip->DARQ + JQS_wSize)) + wTmp = 0; + while (wTmp == readw(chip->DARQ + JQS_wHead) && timeout--) + udelay(1); + + if (chip->capturePeriods == 2) { + void *pDAQ = chip->mappedbase + DARQ_DATA_BUFF + + bank * DAQDS__size + DAQDS_wStart; + unsigned short offset = 0x3000 + chip->capturePeriodBytes; + + if (readw(pDAQ) != PCTODSP_BASED(0x3000)) + offset = 0x3000; + writew(PCTODSP_BASED(offset), pDAQ); + } + + writew(wTmp, chip->DARQ + JQS_wTail); + +#if 0 + /* Get our digital audio queue struct */ + DAQD = bank * DAQDS__size + chip->mappedbase + DARQ_DATA_BUFF; + + /* Get length of data */ + size = readw(DAQD + DAQDS_wSize); + + /* Read data from the head (unprotected bank 1 access okay + since this is only called inside an interrupt) */ + outb(HPBLKSEL_1, chip->io + HP_BLKS); + n = msnd_fifo_write(&chip->DARF, + (char *)(chip->base + bank * DAR_BUFF_SIZE), + size, 0); + if (n <= 0) { + outb(HPBLKSEL_0, chip->io + HP_BLKS); + return n; + } + outb(HPBLKSEL_0, chip->io + HP_BLKS); +#endif + + return 1; +} +EXPORT_SYMBOL(snd_msnd_DARQ); + +int snd_msnd_DAPQ(struct snd_msnd *chip, int start) +{ + u16 DAPQ_tail; + int protect = start, nbanks = 0; + void *DAQD; + static int play_banks_submitted; + /* unsigned long flags; + spin_lock_irqsave(&chip->lock, flags); not necessary */ + + DAPQ_tail = readw(chip->DAPQ + JQS_wTail); + while (DAPQ_tail != readw(chip->DAPQ + JQS_wHead) || start) { + int bank_num = DAPQ_tail / PCTODSP_OFFSET(DAQDS__size); + + if (start) { + start = 0; + play_banks_submitted = 0; + } + + /* Get our digital audio queue struct */ + DAQD = bank_num * DAQDS__size + chip->mappedbase + + DAPQ_DATA_BUFF; + + /* Write size of this bank */ + writew(chip->play_period_bytes, DAQD + DAQDS_wSize); + if (play_banks_submitted < 3) + ++play_banks_submitted; + else if (chip->playPeriods == 2) { + unsigned short offset = chip->play_period_bytes; + + if (readw(DAQD + DAQDS_wStart) != PCTODSP_BASED(0x0)) + offset = 0; + + writew(PCTODSP_BASED(offset), DAQD + DAQDS_wStart); + } + ++nbanks; + + /* Then advance the tail */ + /* + if (protect) + snd_printd(KERN_INFO "B %X %lX\n", + bank_num, xtime.tv_usec); + */ + + DAPQ_tail = (++bank_num % 3) * PCTODSP_OFFSET(DAQDS__size); + writew(DAPQ_tail, chip->DAPQ + JQS_wTail); + /* Tell the DSP to play the bank */ + snd_msnd_send_dsp_cmd(chip, HDEX_PLAY_START); + if (protect) + if (2 == bank_num) + break; + } + /* + if (protect) + snd_printd(KERN_INFO "%lX\n", xtime.tv_usec); + */ + /* spin_unlock_irqrestore(&chip->lock, flags); not necessary */ + return nbanks; +} +EXPORT_SYMBOL(snd_msnd_DAPQ); + +static void snd_msnd_play_reset_queue(struct snd_msnd *chip, + unsigned int pcm_periods, + unsigned int pcm_count) +{ + int n; + void *pDAQ = chip->mappedbase + DAPQ_DATA_BUFF; + + chip->last_playbank = -1; + chip->playLimit = pcm_count * (pcm_periods - 1); + chip->playPeriods = pcm_periods; + writew(PCTODSP_OFFSET(0 * DAQDS__size), chip->DAPQ + JQS_wHead); + writew(PCTODSP_OFFSET(0 * DAQDS__size), chip->DAPQ + JQS_wTail); + + chip->play_period_bytes = pcm_count; + + for (n = 0; n < pcm_periods; ++n, pDAQ += DAQDS__size) { + writew(PCTODSP_BASED((u32)(pcm_count * n)), + pDAQ + DAQDS_wStart); + writew(0, pDAQ + DAQDS_wSize); + writew(1, pDAQ + DAQDS_wFormat); + writew(chip->play_sample_size, pDAQ + DAQDS_wSampleSize); + writew(chip->play_channels, pDAQ + DAQDS_wChannels); + writew(chip->play_sample_rate, pDAQ + DAQDS_wSampleRate); + writew(HIMT_PLAY_DONE * 0x100 + n, pDAQ + DAQDS_wIntMsg); + writew(n, pDAQ + DAQDS_wFlags); + } +} + +static void snd_msnd_capture_reset_queue(struct snd_msnd *chip, + unsigned int pcm_periods, + unsigned int pcm_count) +{ + int n; + void *pDAQ; + /* unsigned long flags; */ + + /* snd_msnd_init_queue(chip->DARQ, DARQ_DATA_BUFF, DARQ_BUFF_SIZE); */ + + chip->last_recbank = 2; + chip->captureLimit = pcm_count * (pcm_periods - 1); + chip->capturePeriods = pcm_periods; + writew(PCTODSP_OFFSET(0 * DAQDS__size), chip->DARQ + JQS_wHead); + writew(PCTODSP_OFFSET(chip->last_recbank * DAQDS__size), + chip->DARQ + JQS_wTail); + +#if 0 /* Critical section: bank 1 access. this is how the OSS driver does it:*/ + spin_lock_irqsave(&chip->lock, flags); + outb(HPBLKSEL_1, chip->io + HP_BLKS); + memset_io(chip->mappedbase, 0, DAR_BUFF_SIZE * 3); + outb(HPBLKSEL_0, chip->io + HP_BLKS); + spin_unlock_irqrestore(&chip->lock, flags); +#endif + + chip->capturePeriodBytes = pcm_count; + snd_printdd("snd_msnd_capture_reset_queue() %i\n", pcm_count); + + pDAQ = chip->mappedbase + DARQ_DATA_BUFF; + + for (n = 0; n < pcm_periods; ++n, pDAQ += DAQDS__size) { + u32 tmp = pcm_count * n; + + writew(PCTODSP_BASED(tmp + 0x3000), pDAQ + DAQDS_wStart); + writew(pcm_count, pDAQ + DAQDS_wSize); + writew(1, pDAQ + DAQDS_wFormat); + writew(chip->capture_sample_size, pDAQ + DAQDS_wSampleSize); + writew(chip->capture_channels, pDAQ + DAQDS_wChannels); + writew(chip->capture_sample_rate, pDAQ + DAQDS_wSampleRate); + writew(HIMT_RECORD_DONE * 0x100 + n, pDAQ + DAQDS_wIntMsg); + writew(n, pDAQ + DAQDS_wFlags); + } +} + +static struct snd_pcm_hardware snd_msnd_playback = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = 0x3000, + .period_bytes_min = 0x40, + .period_bytes_max = 0x1800, + .periods_min = 2, + .periods_max = 3, + .fifo_size = 0, +}; + +static struct snd_pcm_hardware snd_msnd_capture = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = 0x3000, + .period_bytes_min = 0x40, + .period_bytes_max = 0x1800, + .periods_min = 2, + .periods_max = 3, + .fifo_size = 0, +}; + + +static int snd_msnd_playback_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + set_bit(F_AUDIO_WRITE_INUSE, &chip->flags); + clear_bit(F_WRITING, &chip->flags); + snd_msnd_enable_irq(chip); + + runtime->dma_area = chip->mappedbase; + runtime->dma_bytes = 0x3000; + + chip->playback_substream = substream; + runtime->hw = snd_msnd_playback; + return 0; +} + +static int snd_msnd_playback_close(struct snd_pcm_substream *substream) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + snd_msnd_disable_irq(chip); + clear_bit(F_AUDIO_WRITE_INUSE, &chip->flags); + return 0; +} + + +static int snd_msnd_playback_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + int i; + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + void *pDAQ = chip->mappedbase + DAPQ_DATA_BUFF; + + chip->play_sample_size = snd_pcm_format_width(params_format(params)); + chip->play_channels = params_channels(params); + chip->play_sample_rate = params_rate(params); + + for (i = 0; i < 3; ++i, pDAQ += DAQDS__size) { + writew(chip->play_sample_size, pDAQ + DAQDS_wSampleSize); + writew(chip->play_channels, pDAQ + DAQDS_wChannels); + writew(chip->play_sample_rate, pDAQ + DAQDS_wSampleRate); + } + /* dont do this here: + * snd_msnd_calibrate_adc(chip->play_sample_rate); + */ + + return 0; +} + +static int snd_msnd_playback_prepare(struct snd_pcm_substream *substream) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + unsigned int pcm_size = snd_pcm_lib_buffer_bytes(substream); + unsigned int pcm_count = snd_pcm_lib_period_bytes(substream); + unsigned int pcm_periods = pcm_size / pcm_count; + + snd_msnd_play_reset_queue(chip, pcm_periods, pcm_count); + chip->playDMAPos = 0; + return 0; +} + +static int snd_msnd_playback_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + int result = 0; + + if (cmd == SNDRV_PCM_TRIGGER_START) { + snd_printdd("snd_msnd_playback_trigger(START)\n"); + chip->banksPlayed = 0; + set_bit(F_WRITING, &chip->flags); + snd_msnd_DAPQ(chip, 1); + } else if (cmd == SNDRV_PCM_TRIGGER_STOP) { + snd_printdd("snd_msnd_playback_trigger(STop)\n"); + /* interrupt diagnostic, comment this out later */ + clear_bit(F_WRITING, &chip->flags); + snd_msnd_send_dsp_cmd(chip, HDEX_PLAY_STOP); + } else { + snd_printd(KERN_ERR "snd_msnd_playback_trigger(?????)\n"); + result = -EINVAL; + } + + snd_printdd("snd_msnd_playback_trigger() ENDE\n"); + return result; +} + +static snd_pcm_uframes_t +snd_msnd_playback_pointer(struct snd_pcm_substream *substream) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + return bytes_to_frames(substream->runtime, chip->playDMAPos); +} + + +static struct snd_pcm_ops snd_msnd_playback_ops = { + .open = snd_msnd_playback_open, + .close = snd_msnd_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_msnd_playback_hw_params, + .prepare = snd_msnd_playback_prepare, + .trigger = snd_msnd_playback_trigger, + .pointer = snd_msnd_playback_pointer, +}; + +static int snd_msnd_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + set_bit(F_AUDIO_READ_INUSE, &chip->flags); + snd_msnd_enable_irq(chip); + runtime->dma_area = chip->mappedbase + 0x3000; + runtime->dma_bytes = 0x3000; + memset(runtime->dma_area, 0, runtime->dma_bytes); + chip->capture_substream = substream; + runtime->hw = snd_msnd_capture; + return 0; +} + +static int snd_msnd_capture_close(struct snd_pcm_substream *substream) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + snd_msnd_disable_irq(chip); + clear_bit(F_AUDIO_READ_INUSE, &chip->flags); + return 0; +} + +static int snd_msnd_capture_prepare(struct snd_pcm_substream *substream) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + unsigned int pcm_size = snd_pcm_lib_buffer_bytes(substream); + unsigned int pcm_count = snd_pcm_lib_period_bytes(substream); + unsigned int pcm_periods = pcm_size / pcm_count; + + snd_msnd_capture_reset_queue(chip, pcm_periods, pcm_count); + chip->captureDMAPos = 0; + return 0; +} + +static int snd_msnd_capture_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + if (cmd == SNDRV_PCM_TRIGGER_START) { + chip->last_recbank = -1; + set_bit(F_READING, &chip->flags); + if (snd_msnd_send_dsp_cmd(chip, HDEX_RECORD_START) == 0) + return 0; + + clear_bit(F_READING, &chip->flags); + } else if (cmd == SNDRV_PCM_TRIGGER_STOP) { + clear_bit(F_READING, &chip->flags); + snd_msnd_send_dsp_cmd(chip, HDEX_RECORD_STOP); + return 0; + } + return -EINVAL; +} + + +static snd_pcm_uframes_t +snd_msnd_capture_pointer(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + + return bytes_to_frames(runtime, chip->captureDMAPos); +} + + +static int snd_msnd_capture_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + int i; + struct snd_msnd *chip = snd_pcm_substream_chip(substream); + void *pDAQ = chip->mappedbase + DARQ_DATA_BUFF; + + chip->capture_sample_size = snd_pcm_format_width(params_format(params)); + chip->capture_channels = params_channels(params); + chip->capture_sample_rate = params_rate(params); + + for (i = 0; i < 3; ++i, pDAQ += DAQDS__size) { + writew(chip->capture_sample_size, pDAQ + DAQDS_wSampleSize); + writew(chip->capture_channels, pDAQ + DAQDS_wChannels); + writew(chip->capture_sample_rate, pDAQ + DAQDS_wSampleRate); + } + return 0; +} + + +static struct snd_pcm_ops snd_msnd_capture_ops = { + .open = snd_msnd_capture_open, + .close = snd_msnd_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_msnd_capture_hw_params, + .prepare = snd_msnd_capture_prepare, + .trigger = snd_msnd_capture_trigger, + .pointer = snd_msnd_capture_pointer, +}; + + +int snd_msnd_pcm(struct snd_card *card, int device, + struct snd_pcm **rpcm) +{ + struct snd_msnd *chip = card->private_data; + struct snd_pcm *pcm; + int err; + + err = snd_pcm_new(card, "MSNDPINNACLE", device, 1, 1, &pcm); + if (err < 0) + return err; + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_msnd_playback_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_msnd_capture_ops); + + pcm->private_data = chip; + strcpy(pcm->name, "Hurricane"); + + + if (rpcm) + *rpcm = pcm; + return 0; +} +EXPORT_SYMBOL(snd_msnd_pcm); + diff --git a/sound/isa/msnd/msnd.h b/sound/isa/msnd/msnd.h new file mode 100644 index 000000000000..3773e242b58e --- /dev/null +++ b/sound/isa/msnd/msnd.h @@ -0,0 +1,308 @@ +/********************************************************************* + * + * msnd.h + * + * Turtle Beach MultiSound Sound Card Driver for Linux + * + * Some parts of this header file were derived from the Turtle Beach + * MultiSound Driver Development Kit. + * + * Copyright (C) 1998 Andrew Veliath + * Copyright (C) 1993 Turtle Beach Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ********************************************************************/ +#ifndef __MSND_H +#define __MSND_H + +#define DEFSAMPLERATE 44100 +#define DEFSAMPLESIZE SNDRV_PCM_FORMAT_S16 +#define DEFCHANNELS 1 + +#define SRAM_BANK_SIZE 0x8000 +#define SRAM_CNTL_START 0x7F00 +#define SMA_STRUCT_START 0x7F40 + +#define DSP_BASE_ADDR 0x4000 +#define DSP_BANK_BASE 0x4000 + +#define AGND 0x01 +#define SIGNAL 0x02 + +#define EXT_DSP_BIT_DCAL 0x0001 +#define EXT_DSP_BIT_MIDI_CON 0x0002 + +#define BUFFSIZE 0x8000 +#define HOSTQ_SIZE 0x40 + +#define DAP_BUFF_SIZE 0x2400 + +#define DAPQ_STRUCT_SIZE 0x10 +#define DARQ_STRUCT_SIZE 0x10 +#define DAPQ_BUFF_SIZE (3 * 0x10) +#define DARQ_BUFF_SIZE (3 * 0x10) +#define MODQ_BUFF_SIZE 0x400 + +#define DAPQ_DATA_BUFF 0x6C00 +#define DARQ_DATA_BUFF 0x6C30 +#define MODQ_DATA_BUFF 0x6C60 +#define MIDQ_DATA_BUFF 0x7060 + +#define DAPQ_OFFSET SRAM_CNTL_START +#define DARQ_OFFSET (SRAM_CNTL_START + 0x08) +#define MODQ_OFFSET (SRAM_CNTL_START + 0x10) +#define MIDQ_OFFSET (SRAM_CNTL_START + 0x18) +#define DSPQ_OFFSET (SRAM_CNTL_START + 0x20) + +#define HP_ICR 0x00 +#define HP_CVR 0x01 +#define HP_ISR 0x02 +#define HP_IVR 0x03 +#define HP_NU 0x04 +#define HP_INFO 0x04 +#define HP_TXH 0x05 +#define HP_RXH 0x05 +#define HP_TXM 0x06 +#define HP_RXM 0x06 +#define HP_TXL 0x07 +#define HP_RXL 0x07 + +#define HP_ICR_DEF 0x00 +#define HP_CVR_DEF 0x12 +#define HP_ISR_DEF 0x06 +#define HP_IVR_DEF 0x0f +#define HP_NU_DEF 0x00 + +#define HP_IRQM 0x09 + +#define HPR_BLRC 0x08 +#define HPR_SPR1 0x09 +#define HPR_SPR2 0x0A +#define HPR_TCL0 0x0B +#define HPR_TCL1 0x0C +#define HPR_TCL2 0x0D +#define HPR_TCL3 0x0E +#define HPR_TCL4 0x0F + +#define HPICR_INIT 0x80 +#define HPICR_HM1 0x40 +#define HPICR_HM0 0x20 +#define HPICR_HF1 0x10 +#define HPICR_HF0 0x08 +#define HPICR_TREQ 0x02 +#define HPICR_RREQ 0x01 + +#define HPCVR_HC 0x80 + +#define HPISR_HREQ 0x80 +#define HPISR_DMA 0x40 +#define HPISR_HF3 0x10 +#define HPISR_HF2 0x08 +#define HPISR_TRDY 0x04 +#define HPISR_TXDE 0x02 +#define HPISR_RXDF 0x01 + +#define HPIO_290 0 +#define HPIO_260 1 +#define HPIO_250 2 +#define HPIO_240 3 +#define HPIO_230 4 +#define HPIO_220 5 +#define HPIO_210 6 +#define HPIO_3E0 7 + +#define HPMEM_NONE 0 +#define HPMEM_B000 1 +#define HPMEM_C800 2 +#define HPMEM_D000 3 +#define HPMEM_D400 4 +#define HPMEM_D800 5 +#define HPMEM_E000 6 +#define HPMEM_E800 7 + +#define HPIRQ_NONE 0 +#define HPIRQ_5 1 +#define HPIRQ_7 2 +#define HPIRQ_9 3 +#define HPIRQ_10 4 +#define HPIRQ_11 5 +#define HPIRQ_12 6 +#define HPIRQ_15 7 + +#define HIMT_PLAY_DONE 0x00 +#define HIMT_RECORD_DONE 0x01 +#define HIMT_MIDI_EOS 0x02 +#define HIMT_MIDI_OUT 0x03 + +#define HIMT_MIDI_IN_UCHAR 0x0E +#define HIMT_DSP 0x0F + +#define HDEX_BASE 0x92 +#define HDEX_PLAY_START (0 + HDEX_BASE) +#define HDEX_PLAY_STOP (1 + HDEX_BASE) +#define HDEX_PLAY_PAUSE (2 + HDEX_BASE) +#define HDEX_PLAY_RESUME (3 + HDEX_BASE) +#define HDEX_RECORD_START (4 + HDEX_BASE) +#define HDEX_RECORD_STOP (5 + HDEX_BASE) +#define HDEX_MIDI_IN_START (6 + HDEX_BASE) +#define HDEX_MIDI_IN_STOP (7 + HDEX_BASE) +#define HDEX_MIDI_OUT_START (8 + HDEX_BASE) +#define HDEX_MIDI_OUT_STOP (9 + HDEX_BASE) +#define HDEX_AUX_REQ (10 + HDEX_BASE) + +#define HDEXAR_CLEAR_PEAKS 1 +#define HDEXAR_IN_SET_POTS 2 +#define HDEXAR_AUX_SET_POTS 3 +#define HDEXAR_CAL_A_TO_D 4 +#define HDEXAR_RD_EXT_DSP_BITS 5 + +/* Pinnacle only HDEXAR defs */ +#define HDEXAR_SET_ANA_IN 0 +#define HDEXAR_SET_SYNTH_IN 4 +#define HDEXAR_READ_DAT_IN 5 +#define HDEXAR_MIC_SET_POTS 6 +#define HDEXAR_SET_DAT_IN 7 + +#define HDEXAR_SET_SYNTH_48 8 +#define HDEXAR_SET_SYNTH_44 9 + +#define HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) +#define LOWORD(l) ((u16)(u32)(l)) +#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF)) +#define LOBYTE(w) ((u8)(w)) +#define MAKELONG(low, hi) ((long)(((u16)(low))|(((u32)((u16)(hi)))<<16))) +#define MAKEWORD(low, hi) ((u16)(((u8)(low))|(((u16)((u8)(hi)))<<8))) + +#define PCTODSP_OFFSET(w) (u16)((w)/2) +#define PCTODSP_BASED(w) (u16)(((w)/2) + DSP_BASE_ADDR) +#define DSPTOPC_BASED(w) (((w) - DSP_BASE_ADDR) * 2) + +#ifdef SLOWIO +# undef outb +# undef inb +# define outb outb_p +# define inb inb_p +#endif + +/* JobQueueStruct */ +#define JQS_wStart 0x00 +#define JQS_wSize 0x02 +#define JQS_wHead 0x04 +#define JQS_wTail 0x06 +#define JQS__size 0x08 + +/* DAQueueDataStruct */ +#define DAQDS_wStart 0x00 +#define DAQDS_wSize 0x02 +#define DAQDS_wFormat 0x04 +#define DAQDS_wSampleSize 0x06 +#define DAQDS_wChannels 0x08 +#define DAQDS_wSampleRate 0x0A +#define DAQDS_wIntMsg 0x0C +#define DAQDS_wFlags 0x0E +#define DAQDS__size 0x10 + +#include + +struct snd_msnd { + void __iomem *mappedbase; + int play_period_bytes; + int playLimit; + int playPeriods; + int playDMAPos; + int banksPlayed; + int captureDMAPos; + int capturePeriodBytes; + int captureLimit; + int capturePeriods; + struct snd_card *card; + void *msndmidi_mpu; + struct snd_rawmidi *rmidi; + + /* Hardware resources */ + long io; + int memid, irqid; + int irq, irq_ref; + unsigned long base; + + /* Motorola 56k DSP SMA */ + void __iomem *SMA; + void __iomem *DAPQ; + void __iomem *DARQ; + void __iomem *MODQ; + void __iomem *MIDQ; + void __iomem *DSPQ; + int dspq_data_buff, dspq_buff_size; + + /* State variables */ + enum { msndClassic, msndPinnacle } type; + mode_t mode; + unsigned long flags; +#define F_RESETTING 0 +#define F_HAVEDIGITAL 1 +#define F_AUDIO_WRITE_INUSE 2 +#define F_WRITING 3 +#define F_WRITEBLOCK 4 +#define F_WRITEFLUSH 5 +#define F_AUDIO_READ_INUSE 6 +#define F_READING 7 +#define F_READBLOCK 8 +#define F_EXT_MIDI_INUSE 9 +#define F_HDR_MIDI_INUSE 10 +#define F_DISABLE_WRITE_NDELAY 11 + spinlock_t lock; + spinlock_t mixer_lock; + int nresets; + unsigned recsrc; +#define LEVEL_ENTRIES 32 + int left_levels[LEVEL_ENTRIES]; + int right_levels[LEVEL_ENTRIES]; + int calibrate_signal; + int play_sample_size, play_sample_rate, play_channels; + int play_ndelay; + int capture_sample_size, capture_sample_rate, capture_channels; + int capture_ndelay; + u8 bCurrentMidiPatch; + + int last_playbank, last_recbank; + struct snd_pcm_substream *playback_substream; + struct snd_pcm_substream *capture_substream; + +}; + +void snd_msnd_init_queue(void *base, int start, int size); + +int snd_msnd_send_dsp_cmd(struct snd_msnd *chip, u8 cmd); +int snd_msnd_send_word(struct snd_msnd *chip, + unsigned char high, + unsigned char mid, + unsigned char low); +int snd_msnd_upload_host(struct snd_msnd *chip, + const u8 *bin, int len); +int snd_msnd_enable_irq(struct snd_msnd *chip); +int snd_msnd_disable_irq(struct snd_msnd *chip); +void snd_msnd_dsp_halt(struct snd_msnd *chip, struct file *file); +int snd_msnd_DAPQ(struct snd_msnd *chip, int start); +int snd_msnd_DARQ(struct snd_msnd *chip, int start); +int snd_msnd_pcm(struct snd_card *card, int device, struct snd_pcm **rpcm); + +int snd_msndmidi_new(struct snd_card *card, int device); +void snd_msndmidi_input_read(void *mpu); + +void snd_msndmix_setup(struct snd_msnd *chip); +int __devinit snd_msndmix_new(struct snd_card *card); +int snd_msndmix_force_recsrc(struct snd_msnd *chip, int recsrc); +#endif /* __MSND_H */ diff --git a/sound/isa/msnd/msnd_classic.c b/sound/isa/msnd/msnd_classic.c new file mode 100644 index 000000000000..3b23a096fa4e --- /dev/null +++ b/sound/isa/msnd/msnd_classic.c @@ -0,0 +1,3 @@ +/* The work is in msnd_pinnacle.c, just define MSND_CLASSIC before it. */ +#define MSND_CLASSIC +#include "msnd_pinnacle.c" diff --git a/sound/isa/msnd/msnd_classic.h b/sound/isa/msnd/msnd_classic.h new file mode 100644 index 000000000000..f18d5fa5baf4 --- /dev/null +++ b/sound/isa/msnd/msnd_classic.h @@ -0,0 +1,129 @@ +/********************************************************************* + * + * msnd_classic.h + * + * Turtle Beach MultiSound Sound Card Driver for Linux + * + * Some parts of this header file were derived from the Turtle Beach + * MultiSound Driver Development Kit. + * + * Copyright (C) 1998 Andrew Veliath + * Copyright (C) 1993 Turtle Beach Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ********************************************************************/ +#ifndef __MSND_CLASSIC_H +#define __MSND_CLASSIC_H + +#define DSP_NUMIO 0x10 + +#define HP_MEMM 0x08 + +#define HP_BITM 0x0E +#define HP_WAIT 0x0D +#define HP_DSPR 0x0A +#define HP_PROR 0x0B +#define HP_BLKS 0x0C + +#define HPPRORESET_OFF 0 +#define HPPRORESET_ON 1 + +#define HPDSPRESET_OFF 0 +#define HPDSPRESET_ON 1 + +#define HPBLKSEL_0 0 +#define HPBLKSEL_1 1 + +#define HPWAITSTATE_0 0 +#define HPWAITSTATE_1 1 + +#define HPBITMODE_16 0 +#define HPBITMODE_8 1 + +#define HIDSP_INT_PLAY_UNDER 0x00 +#define HIDSP_INT_RECORD_OVER 0x01 +#define HIDSP_INPUT_CLIPPING 0x02 +#define HIDSP_MIDI_IN_OVER 0x10 +#define HIDSP_MIDI_OVERRUN_ERR 0x13 + +#define TIME_PRO_RESET_DONE 0x028A +#define TIME_PRO_SYSEX 0x0040 +#define TIME_PRO_RESET 0x0032 + +#define DAR_BUFF_SIZE 0x2000 + +#define MIDQ_BUFF_SIZE 0x200 +#define DSPQ_BUFF_SIZE 0x40 + +#define DSPQ_DATA_BUFF 0x7260 + +#define MOP_SYNTH 0x10 +#define MOP_EXTOUT 0x32 +#define MOP_EXTTHRU 0x02 +#define MOP_OUTMASK 0x01 + +#define MIP_EXTIN 0x01 +#define MIP_SYNTH 0x00 +#define MIP_INMASK 0x32 + +/* Classic SMA Common Data */ +#define SMA_wCurrPlayBytes 0x0000 +#define SMA_wCurrRecordBytes 0x0002 +#define SMA_wCurrPlayVolLeft 0x0004 +#define SMA_wCurrPlayVolRight 0x0006 +#define SMA_wCurrInVolLeft 0x0008 +#define SMA_wCurrInVolRight 0x000a +#define SMA_wUser_3 0x000c +#define SMA_wUser_4 0x000e +#define SMA_dwUser_5 0x0010 +#define SMA_dwUser_6 0x0014 +#define SMA_wUser_7 0x0018 +#define SMA_wReserved_A 0x001a +#define SMA_wReserved_B 0x001c +#define SMA_wReserved_C 0x001e +#define SMA_wReserved_D 0x0020 +#define SMA_wReserved_E 0x0022 +#define SMA_wReserved_F 0x0024 +#define SMA_wReserved_G 0x0026 +#define SMA_wReserved_H 0x0028 +#define SMA_wCurrDSPStatusFlags 0x002a +#define SMA_wCurrHostStatusFlags 0x002c +#define SMA_wCurrInputTagBits 0x002e +#define SMA_wCurrLeftPeak 0x0030 +#define SMA_wCurrRightPeak 0x0032 +#define SMA_wExtDSPbits 0x0034 +#define SMA_bExtHostbits 0x0036 +#define SMA_bBoardLevel 0x0037 +#define SMA_bInPotPosRight 0x0038 +#define SMA_bInPotPosLeft 0x0039 +#define SMA_bAuxPotPosRight 0x003a +#define SMA_bAuxPotPosLeft 0x003b +#define SMA_wCurrMastVolLeft 0x003c +#define SMA_wCurrMastVolRight 0x003e +#define SMA_bUser_12 0x0040 +#define SMA_bUser_13 0x0041 +#define SMA_wUser_14 0x0042 +#define SMA_wUser_15 0x0044 +#define SMA_wCalFreqAtoD 0x0046 +#define SMA_wUser_16 0x0048 +#define SMA_wUser_17 0x004a +#define SMA__size 0x004c + +#define INITCODEFILE "turtlebeach/msndinit.bin" +#define PERMCODEFILE "turtlebeach/msndperm.bin" +#define LONGNAME "MultiSound (Classic/Monterey/Tahiti)" + +#endif /* __MSND_CLASSIC_H */ diff --git a/sound/isa/msnd/msnd_midi.c b/sound/isa/msnd/msnd_midi.c new file mode 100644 index 000000000000..cb9aa4c4edd0 --- /dev/null +++ b/sound/isa/msnd/msnd_midi.c @@ -0,0 +1,180 @@ +/* + * Copyright (c) by Jaroslav Kysela + * Copyright (c) 2009 by Krzysztof Helt + * Routines for control of MPU-401 in UART mode + * + * MPU-401 supports UART mode which is not capable generate transmit + * interrupts thus output is done via polling. Also, if irq < 0, then + * input is done also via polling. Do not expect good performance. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#include "msnd.h" + +#define MSNDMIDI_MODE_BIT_INPUT 0 +#define MSNDMIDI_MODE_BIT_OUTPUT 1 +#define MSNDMIDI_MODE_BIT_INPUT_TRIGGER 2 +#define MSNDMIDI_MODE_BIT_OUTPUT_TRIGGER 3 + +struct snd_msndmidi { + struct snd_msnd *dev; + + unsigned long mode; /* MSNDMIDI_MODE_XXXX */ + + struct snd_rawmidi_substream *substream_input; + + spinlock_t input_lock; +}; + +/* + * input/output open/close - protected by open_mutex in rawmidi.c + */ +static int snd_msndmidi_input_open(struct snd_rawmidi_substream *substream) +{ + struct snd_msndmidi *mpu; + + snd_printdd("snd_msndmidi_input_open()\n"); + + mpu = substream->rmidi->private_data; + + mpu->substream_input = substream; + + snd_msnd_enable_irq(mpu->dev); + + snd_msnd_send_dsp_cmd(mpu->dev, HDEX_MIDI_IN_START); + set_bit(MSNDMIDI_MODE_BIT_INPUT, &mpu->mode); + return 0; +} + +static int snd_msndmidi_input_close(struct snd_rawmidi_substream *substream) +{ + struct snd_msndmidi *mpu; + + mpu = substream->rmidi->private_data; + snd_msnd_send_dsp_cmd(mpu->dev, HDEX_MIDI_IN_STOP); + clear_bit(MSNDMIDI_MODE_BIT_INPUT, &mpu->mode); + mpu->substream_input = NULL; + snd_msnd_disable_irq(mpu->dev); + return 0; +} + +static void snd_msndmidi_input_drop(struct snd_msndmidi *mpu) +{ + u16 tail; + + tail = readw(mpu->dev->MIDQ + JQS_wTail); + writew(tail, mpu->dev->MIDQ + JQS_wHead); +} + +/* + * trigger input + */ +static void snd_msndmidi_input_trigger(struct snd_rawmidi_substream *substream, + int up) +{ + unsigned long flags; + struct snd_msndmidi *mpu; + + snd_printdd("snd_msndmidi_input_trigger(, %i)\n", up); + + mpu = substream->rmidi->private_data; + spin_lock_irqsave(&mpu->input_lock, flags); + if (up) { + if (!test_and_set_bit(MSNDMIDI_MODE_BIT_INPUT_TRIGGER, + &mpu->mode)) + snd_msndmidi_input_drop(mpu); + } else { + clear_bit(MSNDMIDI_MODE_BIT_INPUT_TRIGGER, &mpu->mode); + } + spin_unlock_irqrestore(&mpu->input_lock, flags); + if (up) + snd_msndmidi_input_read(mpu); +} + +void snd_msndmidi_input_read(void *mpuv) +{ + unsigned long flags; + struct snd_msndmidi *mpu = mpuv; + void *pwMIDQData = mpu->dev->mappedbase + MIDQ_DATA_BUFF; + + spin_lock_irqsave(&mpu->input_lock, flags); + while (readw(mpu->dev->MIDQ + JQS_wTail) != + readw(mpu->dev->MIDQ + JQS_wHead)) { + u16 wTmp, val; + val = readw(pwMIDQData + 2 * readw(mpu->dev->MIDQ + JQS_wHead)); + + if (test_bit(MSNDMIDI_MODE_BIT_INPUT_TRIGGER, + &mpu->mode)) + snd_rawmidi_receive(mpu->substream_input, + (unsigned char *)&val, 1); + + wTmp = readw(mpu->dev->MIDQ + JQS_wHead) + 1; + if (wTmp > readw(mpu->dev->MIDQ + JQS_wSize)) + writew(0, mpu->dev->MIDQ + JQS_wHead); + else + writew(wTmp, mpu->dev->MIDQ + JQS_wHead); + } + spin_unlock_irqrestore(&mpu->input_lock, flags); +} +EXPORT_SYMBOL(snd_msndmidi_input_read); + +static struct snd_rawmidi_ops snd_msndmidi_input = { + .open = snd_msndmidi_input_open, + .close = snd_msndmidi_input_close, + .trigger = snd_msndmidi_input_trigger, +}; + +static void snd_msndmidi_free(struct snd_rawmidi *rmidi) +{ + struct snd_msndmidi *mpu = rmidi->private_data; + kfree(mpu); +} + +int snd_msndmidi_new(struct snd_card *card, int device) +{ + struct snd_msnd *chip = card->private_data; + struct snd_msndmidi *mpu; + struct snd_rawmidi *rmidi; + int err; + + err = snd_rawmidi_new(card, "MSND-MIDI", device, 1, 1, &rmidi); + if (err < 0) + return err; + mpu = kcalloc(1, sizeof(*mpu), GFP_KERNEL); + if (mpu == NULL) { + snd_device_free(card, rmidi); + return -ENOMEM; + } + mpu->dev = chip; + chip->msndmidi_mpu = mpu; + rmidi->private_data = mpu; + rmidi->private_free = snd_msndmidi_free; + spin_lock_init(&mpu->input_lock); + strcpy(rmidi->name, "MSND MIDI"); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, + &snd_msndmidi_input); + rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT; + return 0; +} diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c new file mode 100644 index 000000000000..70559223e8f3 --- /dev/null +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -0,0 +1,1235 @@ +/********************************************************************* + * + * Linux multisound pinnacle/fiji driver for ALSA. + * + * 2002/06/30 Karsten Wiese: + * for now this is only used to build a pinnacle / fiji driver. + * the OSS parent of this code is designed to also support + * the multisound classic via the file msnd_classic.c. + * to make it easier for some brave heart to implemt classic + * support in alsa, i left all the MSND_CLASSIC tokens in this file. + * but for now this untested & undone. + * + * + * ripped from linux kernel 2.4.18 by Karsten Wiese. + * + * the following is a copy of the 2.4.18 OSS FREE file-heading comment: + * + * Turtle Beach MultiSound Sound Card Driver for Linux + * msnd_pinnacle.c / msnd_classic.c + * + * -- If MSND_CLASSIC is defined: + * + * -> driver for Turtle Beach Classic/Monterey/Tahiti + * + * -- Else + * + * -> driver for Turtle Beach Pinnacle/Fiji + * + * 12-3-2000 Modified IO port validation Steve Sycamore + * + * Copyright (C) 1998 Andrew Veliath + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ********************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#ifdef MSND_CLASSIC +# ifndef __alpha__ +# define SLOWIO +# endif +#endif +#include "msnd.h" +#ifdef MSND_CLASSIC +# include "msnd_classic.h" +# define LOGNAME "msnd_classic" +#else +# include "msnd_pinnacle.h" +# define LOGNAME "snd_msnd_pinnacle" +#endif + +static void __devinit set_default_audio_parameters(struct snd_msnd *chip) +{ + chip->play_sample_size = DEFSAMPLESIZE; + chip->play_sample_rate = DEFSAMPLERATE; + chip->play_channels = DEFCHANNELS; + chip->capture_sample_size = DEFSAMPLESIZE; + chip->capture_sample_rate = DEFSAMPLERATE; + chip->capture_channels = DEFCHANNELS; +} + +static void snd_msnd_eval_dsp_msg(struct snd_msnd *chip, u16 wMessage) +{ + switch (HIBYTE(wMessage)) { + case HIMT_PLAY_DONE: { + if (chip->banksPlayed < 3) + snd_printdd("%08X: HIMT_PLAY_DONE: %i\n", + (unsigned)jiffies, LOBYTE(wMessage)); + + if (chip->last_playbank == LOBYTE(wMessage)) { + snd_printdd("chip.last_playbank == LOBYTE(wMessage)\n"); + break; + } + chip->banksPlayed++; + + if (test_bit(F_WRITING, &chip->flags)) + snd_msnd_DAPQ(chip, 0); + + chip->last_playbank = LOBYTE(wMessage); + chip->playDMAPos += chip->play_period_bytes; + if (chip->playDMAPos > chip->playLimit) + chip->playDMAPos = 0; + snd_pcm_period_elapsed(chip->playback_substream); + + break; + } + case HIMT_RECORD_DONE: + if (chip->last_recbank == LOBYTE(wMessage)) + break; + chip->last_recbank = LOBYTE(wMessage); + chip->captureDMAPos += chip->capturePeriodBytes; + if (chip->captureDMAPos > (chip->captureLimit)) + chip->captureDMAPos = 0; + + if (test_bit(F_READING, &chip->flags)) + snd_msnd_DARQ(chip, chip->last_recbank); + + snd_pcm_period_elapsed(chip->capture_substream); + break; + + case HIMT_DSP: + switch (LOBYTE(wMessage)) { +#ifndef MSND_CLASSIC + case HIDSP_PLAY_UNDER: +#endif + case HIDSP_INT_PLAY_UNDER: + snd_printd(KERN_WARNING LOGNAME ": Play underflow %i\n", + chip->banksPlayed); + if (chip->banksPlayed > 2) + clear_bit(F_WRITING, &chip->flags); + break; + + case HIDSP_INT_RECORD_OVER: + snd_printd(KERN_WARNING LOGNAME ": Record overflow\n"); + clear_bit(F_READING, &chip->flags); + break; + + default: + snd_printd(KERN_WARNING LOGNAME + ": DSP message %d 0x%02x\n", + LOBYTE(wMessage), LOBYTE(wMessage)); + break; + } + break; + + case HIMT_MIDI_IN_UCHAR: + if (chip->msndmidi_mpu) + snd_msndmidi_input_read(chip->msndmidi_mpu); + break; + + default: + snd_printd(KERN_WARNING LOGNAME ": HIMT message %d 0x%02x\n", + HIBYTE(wMessage), HIBYTE(wMessage)); + break; + } +} + +static irqreturn_t snd_msnd_interrupt(int irq, void *dev_id) +{ + struct snd_msnd *chip = dev_id; + void *pwDSPQData = chip->mappedbase + DSPQ_DATA_BUFF; + + /* Send ack to DSP */ + /* inb(chip->io + HP_RXL); */ + + /* Evaluate queued DSP messages */ + while (readw(chip->DSPQ + JQS_wTail) != readw(chip->DSPQ + JQS_wHead)) { + u16 wTmp; + + snd_msnd_eval_dsp_msg(chip, + readw(pwDSPQData + 2 * readw(chip->DSPQ + JQS_wHead))); + + wTmp = readw(chip->DSPQ + JQS_wHead) + 1; + if (wTmp > readw(chip->DSPQ + JQS_wSize)) + writew(0, chip->DSPQ + JQS_wHead); + else + writew(wTmp, chip->DSPQ + JQS_wHead); + } + /* Send ack to DSP */ + inb(chip->io + HP_RXL); + return IRQ_HANDLED; +} + + +static int snd_msnd_reset_dsp(long io, unsigned char *info) +{ + int timeout = 100; + + outb(HPDSPRESET_ON, io + HP_DSPR); + msleep(1); +#ifndef MSND_CLASSIC + if (info) + *info = inb(io + HP_INFO); +#endif + outb(HPDSPRESET_OFF, io + HP_DSPR); + msleep(1); + while (timeout-- > 0) { + if (inb(io + HP_CVR) == HP_CVR_DEF) + return 0; + msleep(1); + } + snd_printk(KERN_ERR LOGNAME ": Cannot reset DSP\n"); + + return -EIO; +} + +static int __devinit snd_msnd_probe(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + unsigned char info; +#ifndef MSND_CLASSIC + char *xv, *rev = NULL; + char *pin = "TB Pinnacle", *fiji = "TB Fiji"; + char *pinfiji = "TB Pinnacle/Fiji"; +#endif + + if (!request_region(chip->io, DSP_NUMIO, "probing")) { + snd_printk(KERN_ERR LOGNAME ": I/O port conflict\n"); + return -ENODEV; + } + + if (snd_msnd_reset_dsp(chip->io, &info) < 0) { + release_region(chip->io, DSP_NUMIO); + return -ENODEV; + } + +#ifdef MSND_CLASSIC + strcpy(card->shortname, "Classic/Tahiti/Monterey"); + strcpy(card->longname, "Turtle Beach Multisound"); + printk(KERN_INFO LOGNAME ": %s, " + "I/O 0x%lx-0x%lx, IRQ %d, memory mapped to 0x%lX-0x%lX\n", + card->shortname, + chip->io, chip->io + DSP_NUMIO - 1, + chip->irq, + chip->base, chip->base + 0x7fff); +#else + switch (info >> 4) { + case 0xf: + xv = "<= 1.15"; + break; + case 0x1: + xv = "1.18/1.2"; + break; + case 0x2: + xv = "1.3"; + break; + case 0x3: + xv = "1.4"; + break; + default: + xv = "unknown"; + break; + } + + switch (info & 0x7) { + case 0x0: + rev = "I"; + strcpy(card->shortname, pin); + break; + case 0x1: + rev = "F"; + strcpy(card->shortname, pin); + break; + case 0x2: + rev = "G"; + strcpy(card->shortname, pin); + break; + case 0x3: + rev = "H"; + strcpy(card->shortname, pin); + break; + case 0x4: + rev = "E"; + strcpy(card->shortname, fiji); + break; + case 0x5: + rev = "C"; + strcpy(card->shortname, fiji); + break; + case 0x6: + rev = "D"; + strcpy(card->shortname, fiji); + break; + case 0x7: + rev = "A-B (Fiji) or A-E (Pinnacle)"; + strcpy(card->shortname, pinfiji); + break; + } + strcpy(card->longname, "Turtle Beach Multisound Pinnacle"); + printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, " + "I/O 0x%lx-0x%lx, IRQ %d, memory mapped to 0x%lX-0x%lX\n", + card->shortname, + rev, xv, + chip->io, chip->io + DSP_NUMIO - 1, + chip->irq, + chip->base, chip->base + 0x7fff); +#endif + + release_region(chip->io, DSP_NUMIO); + return 0; +} + +static int snd_msnd_init_sma(struct snd_msnd *chip) +{ + static int initted; + u16 mastVolLeft, mastVolRight; + unsigned long flags; + +#ifdef MSND_CLASSIC + outb(chip->memid, chip->io + HP_MEMM); +#endif + outb(HPBLKSEL_0, chip->io + HP_BLKS); + /* Motorola 56k shared memory base */ + chip->SMA = chip->mappedbase + SMA_STRUCT_START; + + if (initted) { + mastVolLeft = readw(chip->SMA + SMA_wCurrMastVolLeft); + mastVolRight = readw(chip->SMA + SMA_wCurrMastVolRight); + } else + mastVolLeft = mastVolRight = 0; + memset_io(chip->mappedbase, 0, 0x8000); + + /* Critical section: bank 1 access */ + spin_lock_irqsave(&chip->lock, flags); + outb(HPBLKSEL_1, chip->io + HP_BLKS); + memset_io(chip->mappedbase, 0, 0x8000); + outb(HPBLKSEL_0, chip->io + HP_BLKS); + spin_unlock_irqrestore(&chip->lock, flags); + + /* Digital audio play queue */ + chip->DAPQ = chip->mappedbase + DAPQ_OFFSET; + snd_msnd_init_queue(chip->DAPQ, DAPQ_DATA_BUFF, DAPQ_BUFF_SIZE); + + /* Digital audio record queue */ + chip->DARQ = chip->mappedbase + DARQ_OFFSET; + snd_msnd_init_queue(chip->DARQ, DARQ_DATA_BUFF, DARQ_BUFF_SIZE); + + /* MIDI out queue */ + chip->MODQ = chip->mappedbase + MODQ_OFFSET; + snd_msnd_init_queue(chip->MODQ, MODQ_DATA_BUFF, MODQ_BUFF_SIZE); + + /* MIDI in queue */ + chip->MIDQ = chip->mappedbase + MIDQ_OFFSET; + snd_msnd_init_queue(chip->MIDQ, MIDQ_DATA_BUFF, MIDQ_BUFF_SIZE); + + /* DSP -> host message queue */ + chip->DSPQ = chip->mappedbase + DSPQ_OFFSET; + snd_msnd_init_queue(chip->DSPQ, DSPQ_DATA_BUFF, DSPQ_BUFF_SIZE); + + /* Setup some DSP values */ +#ifndef MSND_CLASSIC + writew(1, chip->SMA + SMA_wCurrPlayFormat); + writew(chip->play_sample_size, chip->SMA + SMA_wCurrPlaySampleSize); + writew(chip->play_channels, chip->SMA + SMA_wCurrPlayChannels); + writew(chip->play_sample_rate, chip->SMA + SMA_wCurrPlaySampleRate); +#endif + writew(chip->play_sample_rate, chip->SMA + SMA_wCalFreqAtoD); + writew(mastVolLeft, chip->SMA + SMA_wCurrMastVolLeft); + writew(mastVolRight, chip->SMA + SMA_wCurrMastVolRight); +#ifndef MSND_CLASSIC + writel(0x00010000, chip->SMA + SMA_dwCurrPlayPitch); + writel(0x00000001, chip->SMA + SMA_dwCurrPlayRate); +#endif + writew(0x303, chip->SMA + SMA_wCurrInputTagBits); + + initted = 1; + + return 0; +} + + +static int upload_dsp_code(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + const struct firmware *init_fw = NULL, *perm_fw = NULL; + int err; + + outb(HPBLKSEL_0, chip->io + HP_BLKS); + + err = request_firmware(&init_fw, INITCODEFILE, card->dev); + if (err < 0) { + printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE); + goto cleanup1; + } + err = request_firmware(&perm_fw, PERMCODEFILE, card->dev); + if (err < 0) { + printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE); + goto cleanup; + } + + memcpy_toio(chip->mappedbase, perm_fw->data, perm_fw->size); + if (snd_msnd_upload_host(chip, init_fw->data, init_fw->size) < 0) { + printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n"); + err = -ENODEV; + goto cleanup; + } + printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n"); + err = 0; + +cleanup: + release_firmware(perm_fw); +cleanup1: + release_firmware(init_fw); + return err; +} + +#ifdef MSND_CLASSIC +static void reset_proteus(struct snd_msnd *chip) +{ + outb(HPPRORESET_ON, chip->io + HP_PROR); + msleep(TIME_PRO_RESET); + outb(HPPRORESET_OFF, chip->io + HP_PROR); + msleep(TIME_PRO_RESET_DONE); +} +#endif + +static int snd_msnd_initialize(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + int err, timeout; + +#ifdef MSND_CLASSIC + outb(HPWAITSTATE_0, chip->io + HP_WAIT); + outb(HPBITMODE_16, chip->io + HP_BITM); + + reset_proteus(chip); +#endif + err = snd_msnd_init_sma(chip); + if (err < 0) { + printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n"); + return err; + } + + err = snd_msnd_reset_dsp(chip->io, NULL); + if (err < 0) + return err; + + err = upload_dsp_code(card); + if (err < 0) { + printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n"); + return err; + } + + timeout = 200; + + while (readw(chip->mappedbase)) { + msleep(1); + if (!timeout--) { + snd_printd(KERN_ERR LOGNAME ": DSP reset timeout\n"); + return -EIO; + } + } + + snd_msndmix_setup(chip); + return 0; +} + +static int snd_msnd_dsp_full_reset(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + int rv; + + if (test_bit(F_RESETTING, &chip->flags) || ++chip->nresets > 10) + return 0; + + set_bit(F_RESETTING, &chip->flags); + snd_msnd_dsp_halt(chip, NULL); /* Unconditionally halt */ + + rv = snd_msnd_initialize(card); + if (rv) + printk(KERN_WARNING LOGNAME ": DSP reset failed\n"); + snd_msndmix_force_recsrc(chip, 0); + clear_bit(F_RESETTING, &chip->flags); + return rv; +} + +static int snd_msnd_dev_free(struct snd_device *device) +{ + snd_printdd("snd_msnd_chip_free()\n"); + return 0; +} + +static int snd_msnd_send_dsp_cmd_chk(struct snd_msnd *chip, u8 cmd) +{ + if (snd_msnd_send_dsp_cmd(chip, cmd) == 0) + return 0; + snd_msnd_dsp_full_reset(chip->card); + return snd_msnd_send_dsp_cmd(chip, cmd); +} + +static int __devinit snd_msnd_calibrate_adc(struct snd_msnd *chip, u16 srate) +{ + snd_printdd("snd_msnd_calibrate_adc(%i)\n", srate); + writew(srate, chip->SMA + SMA_wCalFreqAtoD); + if (chip->calibrate_signal == 0) + writew(readw(chip->SMA + SMA_wCurrHostStatusFlags) + | 0x0001, chip->SMA + SMA_wCurrHostStatusFlags); + else + writew(readw(chip->SMA + SMA_wCurrHostStatusFlags) + & ~0x0001, chip->SMA + SMA_wCurrHostStatusFlags); + if (snd_msnd_send_word(chip, 0, 0, HDEXAR_CAL_A_TO_D) == 0 && + snd_msnd_send_dsp_cmd_chk(chip, HDEX_AUX_REQ) == 0) { + schedule_timeout_interruptible(msecs_to_jiffies(333)); + return 0; + } + printk(KERN_WARNING LOGNAME ": ADC calibration failed\n"); + return -EIO; +} + +/* + * ALSA callback function, called when attempting to open the MIDI device. + */ +static int snd_msnd_mpu401_open(struct snd_mpu401 *mpu) +{ + snd_msnd_enable_irq(mpu->private_data); + snd_msnd_send_dsp_cmd(mpu->private_data, HDEX_MIDI_IN_START); + return 0; +} + +static void snd_msnd_mpu401_close(struct snd_mpu401 *mpu) +{ + snd_msnd_send_dsp_cmd(mpu->private_data, HDEX_MIDI_IN_STOP); + snd_msnd_disable_irq(mpu->private_data); +} + +static long mpu_io[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; + +static int __devinit snd_msnd_attach(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + int err; + static struct snd_device_ops ops = { + .dev_free = snd_msnd_dev_free, + }; + + err = request_irq(chip->irq, snd_msnd_interrupt, 0, card->shortname, + chip); + if (err < 0) { + printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", chip->irq); + return err; + } + request_region(chip->io, DSP_NUMIO, card->shortname); + + if (!request_mem_region(chip->base, BUFFSIZE, card->shortname)) { + printk(KERN_ERR LOGNAME + ": unable to grab memory region 0x%lx-0x%lx\n", + chip->base, chip->base + BUFFSIZE - 1); + release_region(chip->io, DSP_NUMIO); + free_irq(chip->irq, chip); + return -EBUSY; + } + chip->mappedbase = ioremap_nocache(chip->base, 0x8000); + if (!chip->mappedbase) { + printk(KERN_ERR LOGNAME + ": unable to map memory region 0x%lx-0x%lx\n", + chip->base, chip->base + BUFFSIZE - 1); + err = -EIO; + goto err_release_region; + } + + err = snd_msnd_dsp_full_reset(card); + if (err < 0) + goto err_release_region; + + /* Register device */ + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) + goto err_release_region; + + err = snd_msnd_pcm(card, 0, NULL); + if (err < 0) { + printk(KERN_ERR LOGNAME ": error creating new PCM device\n"); + goto err_release_region; + } + + err = snd_msndmix_new(card); + if (err < 0) { + printk(KERN_ERR LOGNAME ": error creating new Mixer device\n"); + goto err_release_region; + } + + + if (mpu_io[0] != SNDRV_AUTO_PORT) { + struct snd_mpu401 *mpu; + + err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpu_io[0], + MPU401_MODE_INPUT | + MPU401_MODE_OUTPUT, + mpu_irq[0], IRQF_DISABLED, + &chip->rmidi); + if (err < 0) { + printk(KERN_ERR LOGNAME + ": error creating new Midi device\n"); + goto err_release_region; + } + mpu = chip->rmidi->private_data; + + mpu->open_input = snd_msnd_mpu401_open; + mpu->close_input = snd_msnd_mpu401_close; + mpu->private_data = chip; + } + + disable_irq(chip->irq); + snd_msnd_calibrate_adc(chip, chip->play_sample_rate); + snd_msndmix_force_recsrc(chip, 0); + + err = snd_card_register(card); + if (err < 0) + goto err_release_region; + + return 0; + +err_release_region: + if (chip->mappedbase) + iounmap(chip->mappedbase); + release_mem_region(chip->base, BUFFSIZE); + release_region(chip->io, DSP_NUMIO); + free_irq(chip->irq, chip); + return err; +} + + +static void __devexit snd_msnd_unload(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + + iounmap(chip->mappedbase); + release_mem_region(chip->base, BUFFSIZE); + release_region(chip->io, DSP_NUMIO); + free_irq(chip->irq, chip); + snd_card_free(card); +} + +#ifndef MSND_CLASSIC + +/* Pinnacle/Fiji Logical Device Configuration */ + +static int __devinit snd_msnd_write_cfg(int cfg, int reg, int value) +{ + outb(reg, cfg); + outb(value, cfg + 1); + if (value != inb(cfg + 1)) { + printk(KERN_ERR LOGNAME ": snd_msnd_write_cfg: I/O error\n"); + return -EIO; + } + return 0; +} + +static int __devinit snd_msnd_write_cfg_io0(int cfg, int num, u16 io) +{ + if (snd_msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io))) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io))) + return -EIO; + return 0; +} + +static int __devinit snd_msnd_write_cfg_io1(int cfg, int num, u16 io) +{ + if (snd_msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io))) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io))) + return -EIO; + return 0; +} + +static int __devinit snd_msnd_write_cfg_irq(int cfg, int num, u16 irq) +{ + if (snd_msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq))) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE)) + return -EIO; + return 0; +} + +static int __devinit snd_msnd_write_cfg_mem(int cfg, int num, int mem) +{ + u16 wmem; + + mem >>= 8; + wmem = (u16)(mem & 0xfff); + if (snd_msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem))) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem))) + return -EIO; + if (wmem && snd_msnd_write_cfg(cfg, IREG_MEMCONTROL, + MEMTYPE_HIADDR | MEMTYPE_16BIT)) + return -EIO; + return 0; +} + +static int __devinit snd_msnd_activate_logical(int cfg, int num) +{ + if (snd_msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) + return -EIO; + if (snd_msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE)) + return -EIO; + return 0; +} + +static int __devinit snd_msnd_write_cfg_logical(int cfg, int num, u16 io0, + u16 io1, u16 irq, int mem) +{ + if (snd_msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) + return -EIO; + if (snd_msnd_write_cfg_io0(cfg, num, io0)) + return -EIO; + if (snd_msnd_write_cfg_io1(cfg, num, io1)) + return -EIO; + if (snd_msnd_write_cfg_irq(cfg, num, irq)) + return -EIO; + if (snd_msnd_write_cfg_mem(cfg, num, mem)) + return -EIO; + if (snd_msnd_activate_logical(cfg, num)) + return -EIO; + return 0; +} + +static int __devinit snd_msnd_pinnacle_cfg_reset(int cfg) +{ + int i; + + /* Reset devices if told to */ + printk(KERN_INFO LOGNAME ": Resetting all devices\n"); + for (i = 0; i < 4; ++i) + if (snd_msnd_write_cfg_logical(cfg, i, 0, 0, 0, 0)) + return -EIO; + + return 0; +} +#endif + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ + +module_param_array(index, int, NULL, S_IRUGO); +MODULE_PARM_DESC(index, "Index value for msnd_pinnacle soundcard."); +module_param_array(id, charp, NULL, S_IRUGO); +MODULE_PARM_DESC(id, "ID string for msnd_pinnacle soundcard."); + +static long io[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static long mem[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; + +static long cfg[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; + +#ifndef MSND_CLASSIC +/* Extra Peripheral Configuration (Default: Disable) */ +static long ide_io0[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long ide_io1[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int ide_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; + +static long joystick_io[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +/* If we have the digital daugherboard... */ +static int digital[SNDRV_CARDS]; + +/* Extra Peripheral Configuration */ +static int reset[SNDRV_CARDS]; +#endif + +static int write_ndelay[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = 1 }; + +static int calibrate_signal; + +#ifdef CONFIG_PNP +static int isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; +module_param_array(isapnp, bool, NULL, 0444); +MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); +#endif + +MODULE_AUTHOR("Karsten Wiese "); +MODULE_DESCRIPTION("Turtle Beach " LONGNAME " Linux Driver"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(INITCODEFILE); +MODULE_FIRMWARE(PERMCODEFILE); + +module_param_array(io, long, NULL, S_IRUGO); +MODULE_PARM_DESC(io, "IO port #"); +module_param_array(irq, int, NULL, S_IRUGO); +module_param_array(mem, long, NULL, S_IRUGO); +module_param_array(write_ndelay, int, NULL, S_IRUGO); +module_param(calibrate_signal, int, S_IRUGO); +#ifndef MSND_CLASSIC +module_param_array(digital, int, NULL, S_IRUGO); +module_param_array(cfg, long, NULL, S_IRUGO); +module_param_array(reset, int, 0, S_IRUGO); +module_param_array(mpu_io, long, NULL, S_IRUGO); +module_param_array(mpu_irq, int, NULL, S_IRUGO); +module_param_array(ide_io0, long, NULL, S_IRUGO); +module_param_array(ide_io1, long, NULL, S_IRUGO); +module_param_array(ide_irq, int, NULL, S_IRUGO); +module_param_array(joystick_io, long, NULL, S_IRUGO); +#endif + + +static int __devinit snd_msnd_isa_match(struct device *pdev, unsigned int i) +{ + if (io[i] == SNDRV_AUTO_PORT) + return 0; + + if (irq[i] == SNDRV_AUTO_PORT || mem[i] == SNDRV_AUTO_PORT) { + printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n"); + return 0; + } + +#ifdef MSND_CLASSIC + if (!(io[i] == 0x290 || + io[i] == 0x260 || + io[i] == 0x250 || + io[i] == 0x240 || + io[i] == 0x230 || + io[i] == 0x220 || + io[i] == 0x210 || + io[i] == 0x3e0)) { + printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set " + " to 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x290, " + "or 0x3E0\n"); + return 0; + } +#else + if (io[i] < 0x100 || io[i] > 0x3e0 || (io[i] % 0x10) != 0) { + printk(KERN_ERR LOGNAME + ": \"io\" - DSP I/O base must within the range 0x100 " + "to 0x3E0 and must be evenly divisible by 0x10\n"); + return 0; + } +#endif /* MSND_CLASSIC */ + + if (!(irq[i] == 5 || + irq[i] == 7 || + irq[i] == 9 || + irq[i] == 10 || + irq[i] == 11 || + irq[i] == 12)) { + printk(KERN_ERR LOGNAME + ": \"irq\" - must be set to 5, 7, 9, 10, 11 or 12\n"); + return 0; + } + + if (!(mem[i] == 0xb0000 || + mem[i] == 0xc8000 || + mem[i] == 0xd0000 || + mem[i] == 0xd8000 || + mem[i] == 0xe0000 || + mem[i] == 0xe8000)) { + printk(KERN_ERR LOGNAME ": \"mem\" - must be set to " + "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or " + "0xe8000\n"); + return 0; + } + +#ifndef MSND_CLASSIC + if (cfg[i] == SNDRV_AUTO_PORT) { + printk(KERN_INFO LOGNAME ": Assuming PnP mode\n"); + } else if (cfg[i] != 0x250 && cfg[i] != 0x260 && cfg[i] != 0x270) { + printk(KERN_INFO LOGNAME + ": Config port must be 0x250, 0x260 or 0x270 " + "(or unspecified for PnP mode)\n"); + return 0; + } +#endif /* MSND_CLASSIC */ + + return 1; +} + +static int __devinit snd_msnd_isa_probe(struct device *pdev, unsigned int idx) +{ + int err; + struct snd_card *card; + struct snd_msnd *chip; + + if (isapnp[idx] || cfg[idx] == SNDRV_AUTO_PORT) { + printk(KERN_INFO LOGNAME ": Assuming PnP mode\n"); + return -ENODEV; + } + + err = snd_card_create(index[idx], id[idx], THIS_MODULE, + sizeof(struct snd_msnd), &card); + if (err < 0) + return err; + + snd_card_set_dev(card, pdev); + chip = card->private_data; + chip->card = card; + +#ifdef MSND_CLASSIC + switch (irq[idx]) { + case 5: + chip->irqid = HPIRQ_5; break; + case 7: + chip->irqid = HPIRQ_7; break; + case 9: + chip->irqid = HPIRQ_9; break; + case 10: + chip->irqid = HPIRQ_10; break; + case 11: + chip->irqid = HPIRQ_11; break; + case 12: + chip->irqid = HPIRQ_12; break; + } + + switch (mem[idx]) { + case 0xb0000: + chip->memid = HPMEM_B000; break; + case 0xc8000: + chip->memid = HPMEM_C800; break; + case 0xd0000: + chip->memid = HPMEM_D000; break; + case 0xd8000: + chip->memid = HPMEM_D800; break; + case 0xe0000: + chip->memid = HPMEM_E000; break; + case 0xe8000: + chip->memid = HPMEM_E800; break; + } +#else + printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%lx\n", + cfg[idx]); + + if (!request_region(cfg[idx], 2, "Pinnacle/Fiji Config")) { + printk(KERN_ERR LOGNAME ": Config port 0x%lx conflict\n", + cfg[idx]); + snd_card_free(card); + return -EIO; + } + if (reset[idx]) + if (snd_msnd_pinnacle_cfg_reset(cfg[idx])) { + err = -EIO; + goto cfg_error; + } + + /* DSP */ + err = snd_msnd_write_cfg_logical(cfg[idx], 0, + io[idx], 0, + irq[idx], mem[idx]); + + if (err) + goto cfg_error; + + /* The following are Pinnacle specific */ + + /* MPU */ + if (mpu_io[idx] != SNDRV_AUTO_PORT + && mpu_irq[idx] != SNDRV_AUTO_IRQ) { + printk(KERN_INFO LOGNAME + ": Configuring MPU to I/O 0x%lx IRQ %d\n", + mpu_io[idx], mpu_irq[idx]); + err = snd_msnd_write_cfg_logical(cfg[idx], 1, + mpu_io[idx], 0, + mpu_irq[idx], 0); + + if (err) + goto cfg_error; + } + + /* IDE */ + if (ide_io0[idx] != SNDRV_AUTO_PORT + && ide_io1[idx] != SNDRV_AUTO_PORT + && ide_irq[idx] != SNDRV_AUTO_IRQ) { + printk(KERN_INFO LOGNAME + ": Configuring IDE to I/O 0x%lx, 0x%lx IRQ %d\n", + ide_io0[idx], ide_io1[idx], ide_irq[idx]); + err = snd_msnd_write_cfg_logical(cfg[idx], 2, + ide_io0[idx], ide_io1[idx], + ide_irq[idx], 0); + + if (err) + goto cfg_error; + } + + /* Joystick */ + if (joystick_io[idx] != SNDRV_AUTO_PORT) { + printk(KERN_INFO LOGNAME + ": Configuring joystick to I/O 0x%lx\n", + joystick_io[idx]); + err = snd_msnd_write_cfg_logical(cfg[idx], 3, + joystick_io[idx], 0, + 0, 0); + + if (err) + goto cfg_error; + } + release_region(cfg[idx], 2); + +#endif /* MSND_CLASSIC */ + + set_default_audio_parameters(chip); +#ifdef MSND_CLASSIC + chip->type = msndClassic; +#else + chip->type = msndPinnacle; +#endif + chip->io = io[idx]; + chip->irq = irq[idx]; + chip->base = mem[idx]; + + chip->calibrate_signal = calibrate_signal ? 1 : 0; + chip->recsrc = 0; + chip->dspq_data_buff = DSPQ_DATA_BUFF; + chip->dspq_buff_size = DSPQ_BUFF_SIZE; + if (write_ndelay[idx]) + clear_bit(F_DISABLE_WRITE_NDELAY, &chip->flags); + else + set_bit(F_DISABLE_WRITE_NDELAY, &chip->flags); +#ifndef MSND_CLASSIC + if (digital[idx]) + set_bit(F_HAVEDIGITAL, &chip->flags); +#endif + spin_lock_init(&chip->lock); + err = snd_msnd_probe(card); + if (err < 0) { + printk(KERN_ERR LOGNAME ": Probe failed\n"); + snd_card_free(card); + return err; + } + + err = snd_msnd_attach(card); + if (err < 0) { + printk(KERN_ERR LOGNAME ": Attach failed\n"); + snd_card_free(card); + return err; + } + dev_set_drvdata(pdev, card); + + return 0; + +#ifndef MSND_CLASSIC +cfg_error: + release_region(cfg[idx], 2); + snd_card_free(card); + return err; +#endif +} + +static int __devexit snd_msnd_isa_remove(struct device *pdev, unsigned int dev) +{ + snd_msnd_unload(dev_get_drvdata(pdev)); + dev_set_drvdata(pdev, NULL); + return 0; +} + +#define DEV_NAME "msnd-pinnacle" + +static struct isa_driver snd_msnd_driver = { + .match = snd_msnd_isa_match, + .probe = snd_msnd_isa_probe, + .remove = __devexit_p(snd_msnd_isa_remove), + /* FIXME: suspend, resume */ + .driver = { + .name = DEV_NAME + }, +}; + +#ifdef CONFIG_PNP +static int __devinit snd_msnd_pnp_detect(struct pnp_card_link *pcard, + const struct pnp_card_device_id *pid) +{ + static int idx; + struct pnp_dev *pnp_dev; + struct pnp_dev *mpu_dev; + struct snd_card *card; + struct snd_msnd *chip; + int ret; + + for ( ; idx < SNDRV_CARDS; idx++) { + if (isapnp[idx]) + break; + } + if (idx >= SNDRV_CARDS) + return -ENODEV; + + /* + * Check that we still have room for another sound card ... + */ + pnp_dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); + if (!pnp_dev) + return -ENODEV; + + mpu_dev = pnp_request_card_device(pcard, pid->devs[1].id, NULL); + if (!mpu_dev) + return -ENODEV; + + if (!pnp_is_active(pnp_dev) && pnp_activate_dev(pnp_dev) < 0) { + printk(KERN_INFO "msnd_pinnacle: device is inactive\n"); + return -EBUSY; + } + + if (!pnp_is_active(mpu_dev) && pnp_activate_dev(mpu_dev) < 0) { + printk(KERN_INFO "msnd_pinnacle: MPU device is inactive\n"); + return -EBUSY; + } + + /* + * Create a new ALSA sound card entry, in anticipation + * of detecting our hardware ... + */ + ret = snd_card_create(index[idx], id[idx], THIS_MODULE, + sizeof(struct snd_msnd), &card); + if (ret < 0) + return ret; + + chip = card->private_data; + chip->card = card; + snd_card_set_dev(card, &pcard->card->dev); + + /* + * Read the correct parameters off the ISA PnP bus ... + */ + io[idx] = pnp_port_start(pnp_dev, 0); + irq[idx] = pnp_irq(pnp_dev, 0); + mem[idx] = pnp_mem_start(pnp_dev, 0); + mpu_io[idx] = pnp_port_start(mpu_dev, 0); + mpu_irq[idx] = pnp_irq(mpu_dev, 0); + + set_default_audio_parameters(chip); +#ifdef MSND_CLASSIC + chip->type = msndClassic; +#else + chip->type = msndPinnacle; +#endif + chip->io = io[idx]; + chip->irq = irq[idx]; + chip->base = mem[idx]; + + chip->calibrate_signal = calibrate_signal ? 1 : 0; + chip->recsrc = 0; + chip->dspq_data_buff = DSPQ_DATA_BUFF; + chip->dspq_buff_size = DSPQ_BUFF_SIZE; + if (write_ndelay[idx]) + clear_bit(F_DISABLE_WRITE_NDELAY, &chip->flags); + else + set_bit(F_DISABLE_WRITE_NDELAY, &chip->flags); +#ifndef MSND_CLASSIC + if (digital[idx]) + set_bit(F_HAVEDIGITAL, &chip->flags); +#endif + spin_lock_init(&chip->lock); + ret = snd_msnd_probe(card); + if (ret < 0) { + printk(KERN_ERR LOGNAME ": Probe failed\n"); + goto _release_card; + } + + ret = snd_msnd_attach(card); + if (ret < 0) { + printk(KERN_ERR LOGNAME ": Attach failed\n"); + goto _release_card; + } + + pnp_set_card_drvdata(pcard, card); + ++idx; + return 0; + +_release_card: + snd_card_free(card); + return ret; +} + +static void __devexit snd_msnd_pnp_remove(struct pnp_card_link *pcard) +{ + snd_msnd_unload(pnp_get_card_drvdata(pcard)); + pnp_set_card_drvdata(pcard, NULL); +} + +static int isa_registered; +static int pnp_registered; + +static struct pnp_card_device_id msnd_pnpids[] = { + /* Pinnacle PnP */ + { .id = "BVJ0440", .devs = { { "TBS0000" }, { "TBS0001" } } }, + { .id = "" } /* end */ +}; + +MODULE_DEVICE_TABLE(pnp_card, msnd_pnpids); + +static struct pnp_card_driver msnd_pnpc_driver = { + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + .name = "msnd_pinnacle", + .id_table = msnd_pnpids, + .probe = snd_msnd_pnp_detect, + .remove = __devexit_p(snd_msnd_pnp_remove), +}; +#endif /* CONFIG_PNP */ + +static int __init snd_msnd_init(void) +{ + int err; + + err = isa_register_driver(&snd_msnd_driver, SNDRV_CARDS); +#ifdef CONFIG_PNP + if (!err) + isa_registered = 1; + + err = pnp_register_card_driver(&msnd_pnpc_driver); + if (!err) + pnp_registered = 1; + + if (isa_registered) + err = 0; +#endif + return err; +} + +static void __exit snd_msnd_exit(void) +{ +#ifdef CONFIG_PNP + if (pnp_registered) + pnp_unregister_card_driver(&msnd_pnpc_driver); + if (isa_registered) +#endif + isa_unregister_driver(&snd_msnd_driver); +} + +module_init(snd_msnd_init); +module_exit(snd_msnd_exit); + diff --git a/sound/isa/msnd/msnd_pinnacle.h b/sound/isa/msnd/msnd_pinnacle.h new file mode 100644 index 000000000000..48318d1ee340 --- /dev/null +++ b/sound/isa/msnd/msnd_pinnacle.h @@ -0,0 +1,181 @@ +/********************************************************************* + * + * msnd_pinnacle.h + * + * Turtle Beach MultiSound Sound Card Driver for Linux + * + * Some parts of this header file were derived from the Turtle Beach + * MultiSound Driver Development Kit. + * + * Copyright (C) 1998 Andrew Veliath + * Copyright (C) 1993 Turtle Beach Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ********************************************************************/ +#ifndef __MSND_PINNACLE_H +#define __MSND_PINNACLE_H + +#define DSP_NUMIO 0x08 + +#define IREG_LOGDEVICE 0x07 +#define IREG_ACTIVATE 0x30 +#define LD_ACTIVATE 0x01 +#define LD_DISACTIVATE 0x00 +#define IREG_EECONTROL 0x3F +#define IREG_MEMBASEHI 0x40 +#define IREG_MEMBASELO 0x41 +#define IREG_MEMCONTROL 0x42 +#define IREG_MEMRANGEHI 0x43 +#define IREG_MEMRANGELO 0x44 +#define MEMTYPE_8BIT 0x00 +#define MEMTYPE_16BIT 0x02 +#define MEMTYPE_RANGE 0x00 +#define MEMTYPE_HIADDR 0x01 +#define IREG_IO0_BASEHI 0x60 +#define IREG_IO0_BASELO 0x61 +#define IREG_IO1_BASEHI 0x62 +#define IREG_IO1_BASELO 0x63 +#define IREG_IRQ_NUMBER 0x70 +#define IREG_IRQ_TYPE 0x71 +#define IRQTYPE_HIGH 0x02 +#define IRQTYPE_LOW 0x00 +#define IRQTYPE_LEVEL 0x01 +#define IRQTYPE_EDGE 0x00 + +#define HP_DSPR 0x04 +#define HP_BLKS 0x04 + +#define HPDSPRESET_OFF 2 +#define HPDSPRESET_ON 0 + +#define HPBLKSEL_0 2 +#define HPBLKSEL_1 3 + +#define HIMT_DAT_OFF 0x03 + +#define HIDSP_PLAY_UNDER 0x00 +#define HIDSP_INT_PLAY_UNDER 0x01 +#define HIDSP_SSI_TX_UNDER 0x02 +#define HIDSP_RECQ_OVERFLOW 0x08 +#define HIDSP_INT_RECORD_OVER 0x09 +#define HIDSP_SSI_RX_OVERFLOW 0x0a + +#define HIDSP_MIDI_IN_OVER 0x10 + +#define HIDSP_MIDI_FRAME_ERR 0x11 +#define HIDSP_MIDI_PARITY_ERR 0x12 +#define HIDSP_MIDI_OVERRUN_ERR 0x13 + +#define HIDSP_INPUT_CLIPPING 0x20 +#define HIDSP_MIX_CLIPPING 0x30 +#define HIDSP_DAT_IN_OFF 0x21 + +#define TIME_PRO_RESET_DONE 0x028A +#define TIME_PRO_SYSEX 0x001E +#define TIME_PRO_RESET 0x0032 + +#define DAR_BUFF_SIZE 0x1000 + +#define MIDQ_BUFF_SIZE 0x800 +#define DSPQ_BUFF_SIZE 0x5A0 + +#define DSPQ_DATA_BUFF 0x7860 + +#define MOP_WAVEHDR 0 +#define MOP_EXTOUT 1 +#define MOP_HWINIT 0xfe +#define MOP_NONE 0xff +#define MOP_MAX 1 + +#define MIP_EXTIN 0 +#define MIP_WAVEHDR 1 +#define MIP_HWINIT 0xfe +#define MIP_MAX 1 + +/* Pinnacle/Fiji SMA Common Data */ +#define SMA_wCurrPlayBytes 0x0000 +#define SMA_wCurrRecordBytes 0x0002 +#define SMA_wCurrPlayVolLeft 0x0004 +#define SMA_wCurrPlayVolRight 0x0006 +#define SMA_wCurrInVolLeft 0x0008 +#define SMA_wCurrInVolRight 0x000a +#define SMA_wCurrMHdrVolLeft 0x000c +#define SMA_wCurrMHdrVolRight 0x000e +#define SMA_dwCurrPlayPitch 0x0010 +#define SMA_dwCurrPlayRate 0x0014 +#define SMA_wCurrMIDIIOPatch 0x0018 +#define SMA_wCurrPlayFormat 0x001a +#define SMA_wCurrPlaySampleSize 0x001c +#define SMA_wCurrPlayChannels 0x001e +#define SMA_wCurrPlaySampleRate 0x0020 +#define SMA_wCurrRecordFormat 0x0022 +#define SMA_wCurrRecordSampleSize 0x0024 +#define SMA_wCurrRecordChannels 0x0026 +#define SMA_wCurrRecordSampleRate 0x0028 +#define SMA_wCurrDSPStatusFlags 0x002a +#define SMA_wCurrHostStatusFlags 0x002c +#define SMA_wCurrInputTagBits 0x002e +#define SMA_wCurrLeftPeak 0x0030 +#define SMA_wCurrRightPeak 0x0032 +#define SMA_bMicPotPosLeft 0x0034 +#define SMA_bMicPotPosRight 0x0035 +#define SMA_bMicPotMaxLeft 0x0036 +#define SMA_bMicPotMaxRight 0x0037 +#define SMA_bInPotPosLeft 0x0038 +#define SMA_bInPotPosRight 0x0039 +#define SMA_bAuxPotPosLeft 0x003a +#define SMA_bAuxPotPosRight 0x003b +#define SMA_bInPotMaxLeft 0x003c +#define SMA_bInPotMaxRight 0x003d +#define SMA_bAuxPotMaxLeft 0x003e +#define SMA_bAuxPotMaxRight 0x003f +#define SMA_bInPotMaxMethod 0x0040 +#define SMA_bAuxPotMaxMethod 0x0041 +#define SMA_wCurrMastVolLeft 0x0042 +#define SMA_wCurrMastVolRight 0x0044 +#define SMA_wCalFreqAtoD 0x0046 +#define SMA_wCurrAuxVolLeft 0x0048 +#define SMA_wCurrAuxVolRight 0x004a +#define SMA_wCurrPlay1VolLeft 0x004c +#define SMA_wCurrPlay1VolRight 0x004e +#define SMA_wCurrPlay2VolLeft 0x0050 +#define SMA_wCurrPlay2VolRight 0x0052 +#define SMA_wCurrPlay3VolLeft 0x0054 +#define SMA_wCurrPlay3VolRight 0x0056 +#define SMA_wCurrPlay4VolLeft 0x0058 +#define SMA_wCurrPlay4VolRight 0x005a +#define SMA_wCurrPlay1PeakLeft 0x005c +#define SMA_wCurrPlay1PeakRight 0x005e +#define SMA_wCurrPlay2PeakLeft 0x0060 +#define SMA_wCurrPlay2PeakRight 0x0062 +#define SMA_wCurrPlay3PeakLeft 0x0064 +#define SMA_wCurrPlay3PeakRight 0x0066 +#define SMA_wCurrPlay4PeakLeft 0x0068 +#define SMA_wCurrPlay4PeakRight 0x006a +#define SMA_wCurrPlayPeakLeft 0x006c +#define SMA_wCurrPlayPeakRight 0x006e +#define SMA_wCurrDATSR 0x0070 +#define SMA_wCurrDATRXCHNL 0x0072 +#define SMA_wCurrDATTXCHNL 0x0074 +#define SMA_wCurrDATRXRate 0x0076 +#define SMA_dwDSPPlayCount 0x0078 +#define SMA__size 0x007c + +#define INITCODEFILE "turtlebeach/pndspini.bin" +#define PERMCODEFILE "turtlebeach/pndsperm.bin" +#define LONGNAME "MultiSound (Pinnacle/Fiji)" + +#endif /* __MSND_PINNACLE_H */ diff --git a/sound/isa/msnd/msnd_pinnacle_mixer.c b/sound/isa/msnd/msnd_pinnacle_mixer.c new file mode 100644 index 000000000000..494058a1a502 --- /dev/null +++ b/sound/isa/msnd/msnd_pinnacle_mixer.c @@ -0,0 +1,343 @@ +/*************************************************************************** + msnd_pinnacle_mixer.c - description + ------------------- + begin : Fre Jun 7 2002 + copyright : (C) 2002 by karsten wiese + email : annabellesgarden@yahoo.de + ***************************************************************************/ + +/*************************************************************************** + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + ***************************************************************************/ + +#include + +#include +#include +#include "msnd.h" +#include "msnd_pinnacle.h" + + +#define MSND_MIXER_VOLUME 0 +#define MSND_MIXER_PCM 1 +#define MSND_MIXER_AUX 2 /* Input source 1 (aux1) */ +#define MSND_MIXER_IMIX 3 /* Recording monitor */ +#define MSND_MIXER_SYNTH 4 +#define MSND_MIXER_SPEAKER 5 +#define MSND_MIXER_LINE 6 +#define MSND_MIXER_MIC 7 +#define MSND_MIXER_RECLEV 11 /* Recording level */ +#define MSND_MIXER_IGAIN 12 /* Input gain */ +#define MSND_MIXER_OGAIN 13 /* Output gain */ +#define MSND_MIXER_DIGITAL 17 /* Digital (input) 1 */ + +/* Device mask bits */ + +#define MSND_MASK_VOLUME (1 << MSND_MIXER_VOLUME) +#define MSND_MASK_SYNTH (1 << MSND_MIXER_SYNTH) +#define MSND_MASK_PCM (1 << MSND_MIXER_PCM) +#define MSND_MASK_SPEAKER (1 << MSND_MIXER_SPEAKER) +#define MSND_MASK_LINE (1 << MSND_MIXER_LINE) +#define MSND_MASK_MIC (1 << MSND_MIXER_MIC) +#define MSND_MASK_IMIX (1 << MSND_MIXER_IMIX) +#define MSND_MASK_RECLEV (1 << MSND_MIXER_RECLEV) +#define MSND_MASK_IGAIN (1 << MSND_MIXER_IGAIN) +#define MSND_MASK_OGAIN (1 << MSND_MIXER_OGAIN) +#define MSND_MASK_AUX (1 << MSND_MIXER_AUX) +#define MSND_MASK_DIGITAL (1 << MSND_MIXER_DIGITAL) + +static int snd_msndmix_info_mux(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[3] = { + "Analog", "MASS", "SPDIF", + }; + struct snd_msnd *chip = snd_kcontrol_chip(kcontrol); + unsigned items = test_bit(F_HAVEDIGITAL, &chip->flags) ? 3 : 2; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = items; + if (uinfo->value.enumerated.item >= items) + uinfo->value.enumerated.item = items - 1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int snd_msndmix_get_mux(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_msnd *chip = snd_kcontrol_chip(kcontrol); + /* MSND_MASK_IMIX is the default */ + ucontrol->value.enumerated.item[0] = 0; + + if (chip->recsrc & MSND_MASK_SYNTH) { + ucontrol->value.enumerated.item[0] = 1; + } else if ((chip->recsrc & MSND_MASK_DIGITAL) && + test_bit(F_HAVEDIGITAL, &chip->flags)) { + ucontrol->value.enumerated.item[0] = 2; + } + + + return 0; +} + +static int snd_msndmix_set_mux(struct snd_msnd *chip, int val) +{ + unsigned newrecsrc; + int change; + unsigned char msndbyte; + + switch (val) { + case 0: + newrecsrc = MSND_MASK_IMIX; + msndbyte = HDEXAR_SET_ANA_IN; + break; + case 1: + newrecsrc = MSND_MASK_SYNTH; + msndbyte = HDEXAR_SET_SYNTH_IN; + break; + case 2: + newrecsrc = MSND_MASK_DIGITAL; + msndbyte = HDEXAR_SET_DAT_IN; + break; + default: + return -EINVAL; + } + change = newrecsrc != chip->recsrc; + if (change) { + change = 0; + if (!snd_msnd_send_word(chip, 0, 0, msndbyte)) + if (!snd_msnd_send_dsp_cmd(chip, HDEX_AUX_REQ)) { + chip->recsrc = newrecsrc; + change = 1; + } + } + return change; +} + +static int snd_msndmix_put_mux(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_msnd *msnd = snd_kcontrol_chip(kcontrol); + return snd_msndmix_set_mux(msnd, ucontrol->value.enumerated.item[0]); +} + + +static int snd_msndmix_volume_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 100; + return 0; +} + +static int snd_msndmix_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_msnd *msnd = snd_kcontrol_chip(kcontrol); + int addr = kcontrol->private_value; + unsigned long flags; + + spin_lock_irqsave(&msnd->mixer_lock, flags); + ucontrol->value.integer.value[0] = msnd->left_levels[addr] * 100; + ucontrol->value.integer.value[0] /= 0xFFFF; + ucontrol->value.integer.value[1] = msnd->right_levels[addr] * 100; + ucontrol->value.integer.value[1] /= 0xFFFF; + spin_unlock_irqrestore(&msnd->mixer_lock, flags); + return 0; +} + +#define update_volm(a, b) \ + do { \ + writew((dev->left_levels[a] >> 1) * \ + readw(dev->SMA + SMA_wCurrMastVolLeft) / 0xffff, \ + dev->SMA + SMA_##b##Left); \ + writew((dev->right_levels[a] >> 1) * \ + readw(dev->SMA + SMA_wCurrMastVolRight) / 0xffff, \ + dev->SMA + SMA_##b##Right); \ + } while (0); + +#define update_potm(d, s, ar) \ + do { \ + writeb((dev->left_levels[d] >> 8) * \ + readw(dev->SMA + SMA_wCurrMastVolLeft) / 0xffff, \ + dev->SMA + SMA_##s##Left); \ + writeb((dev->right_levels[d] >> 8) * \ + readw(dev->SMA + SMA_wCurrMastVolRight) / 0xffff, \ + dev->SMA + SMA_##s##Right); \ + if (snd_msnd_send_word(dev, 0, 0, ar) == 0) \ + snd_msnd_send_dsp_cmd(dev, HDEX_AUX_REQ); \ + } while (0); + +#define update_pot(d, s, ar) \ + do { \ + writeb(dev->left_levels[d] >> 8, \ + dev->SMA + SMA_##s##Left); \ + writeb(dev->right_levels[d] >> 8, \ + dev->SMA + SMA_##s##Right); \ + if (snd_msnd_send_word(dev, 0, 0, ar) == 0) \ + snd_msnd_send_dsp_cmd(dev, HDEX_AUX_REQ); \ + } while (0); + + +static int snd_msndmix_set(struct snd_msnd *dev, int d, int left, int right) +{ + int bLeft, bRight; + int wLeft, wRight; + int updatemaster = 0; + + if (d >= LEVEL_ENTRIES) + return -EINVAL; + + bLeft = left * 0xff / 100; + wLeft = left * 0xffff / 100; + + bRight = right * 0xff / 100; + wRight = right * 0xffff / 100; + + dev->left_levels[d] = wLeft; + dev->right_levels[d] = wRight; + + switch (d) { + /* master volume unscaled controls */ + case MSND_MIXER_LINE: /* line pot control */ + /* scaled by IMIX in digital mix */ + writeb(bLeft, dev->SMA + SMA_bInPotPosLeft); + writeb(bRight, dev->SMA + SMA_bInPotPosRight); + if (snd_msnd_send_word(dev, 0, 0, HDEXAR_IN_SET_POTS) == 0) + snd_msnd_send_dsp_cmd(dev, HDEX_AUX_REQ); + break; + case MSND_MIXER_MIC: /* mic pot control */ + if (dev->type == msndClassic) + return -EINVAL; + /* scaled by IMIX in digital mix */ + writeb(bLeft, dev->SMA + SMA_bMicPotPosLeft); + writeb(bRight, dev->SMA + SMA_bMicPotPosRight); + if (snd_msnd_send_word(dev, 0, 0, HDEXAR_MIC_SET_POTS) == 0) + snd_msnd_send_dsp_cmd(dev, HDEX_AUX_REQ); + break; + case MSND_MIXER_VOLUME: /* master volume */ + writew(wLeft, dev->SMA + SMA_wCurrMastVolLeft); + writew(wRight, dev->SMA + SMA_wCurrMastVolRight); + /* fall through */ + + case MSND_MIXER_AUX: /* aux pot control */ + /* scaled by master volume */ + /* fall through */ + + /* digital controls */ + case MSND_MIXER_SYNTH: /* synth vol (dsp mix) */ + case MSND_MIXER_PCM: /* pcm vol (dsp mix) */ + case MSND_MIXER_IMIX: /* input monitor (dsp mix) */ + /* scaled by master volume */ + updatemaster = 1; + break; + + default: + return -EINVAL; + } + + if (updatemaster) { + /* update master volume scaled controls */ + update_volm(MSND_MIXER_PCM, wCurrPlayVol); + update_volm(MSND_MIXER_IMIX, wCurrInVol); + if (dev->type == msndPinnacle) + update_volm(MSND_MIXER_SYNTH, wCurrMHdrVol); + update_potm(MSND_MIXER_AUX, bAuxPotPos, HDEXAR_AUX_SET_POTS); + } + + return 0; +} + +static int snd_msndmix_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_msnd *msnd = snd_kcontrol_chip(kcontrol); + int change, addr = kcontrol->private_value; + int left, right; + unsigned long flags; + + left = ucontrol->value.integer.value[0] % 101; + right = ucontrol->value.integer.value[1] % 101; + spin_lock_irqsave(&msnd->mixer_lock, flags); + change = msnd->left_levels[addr] != left + || msnd->right_levels[addr] != right; + snd_msndmix_set(msnd, addr, left, right); + spin_unlock_irqrestore(&msnd->mixer_lock, flags); + return change; +} + + +#define DUMMY_VOLUME(xname, xindex, addr) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_msndmix_volume_info, \ + .get = snd_msndmix_volume_get, .put = snd_msndmix_volume_put, \ + .private_value = addr } + + +static struct snd_kcontrol_new snd_msnd_controls[] = { +DUMMY_VOLUME("Master Volume", 0, MSND_MIXER_VOLUME), +DUMMY_VOLUME("PCM Volume", 0, MSND_MIXER_PCM), +DUMMY_VOLUME("Aux Volume", 0, MSND_MIXER_AUX), +DUMMY_VOLUME("Line Volume", 0, MSND_MIXER_LINE), +DUMMY_VOLUME("Mic Volume", 0, MSND_MIXER_MIC), +DUMMY_VOLUME("Monitor", 0, MSND_MIXER_IMIX), +{ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Source", + .info = snd_msndmix_info_mux, + .get = snd_msndmix_get_mux, + .put = snd_msndmix_put_mux, +} +}; + + +int __devinit snd_msndmix_new(struct snd_card *card) +{ + struct snd_msnd *chip = card->private_data; + unsigned int idx; + int err; + + if (snd_BUG_ON(!chip)) + return -EINVAL; + spin_lock_init(&chip->mixer_lock); + strcpy(card->mixername, "MSND Pinnacle Mixer"); + + for (idx = 0; idx < ARRAY_SIZE(snd_msnd_controls); idx++) + err = snd_ctl_add(card, + snd_ctl_new1(snd_msnd_controls + idx, chip)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(snd_msndmix_new); + +void snd_msndmix_setup(struct snd_msnd *dev) +{ + update_pot(MSND_MIXER_LINE, bInPotPos, HDEXAR_IN_SET_POTS); + update_potm(MSND_MIXER_AUX, bAuxPotPos, HDEXAR_AUX_SET_POTS); + update_volm(MSND_MIXER_PCM, wCurrPlayVol); + update_volm(MSND_MIXER_IMIX, wCurrInVol); + if (dev->type == msndPinnacle) { + update_pot(MSND_MIXER_MIC, bMicPotPos, HDEXAR_MIC_SET_POTS); + update_volm(MSND_MIXER_SYNTH, wCurrMHdrVol); + } +} +EXPORT_SYMBOL(snd_msndmix_setup); + +int snd_msndmix_force_recsrc(struct snd_msnd *dev, int recsrc) +{ + dev->recsrc = -1; + return snd_msndmix_set_mux(dev, recsrc); +} +EXPORT_SYMBOL(snd_msndmix_force_recsrc); -- cgit v1.2.3 From c96330b083ce88b9fea428df99b4631f1b6410ef Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 28 Jan 2009 08:23:03 +0100 Subject: ALSA: Add description of new snd-msnd-* drivers Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 48 +++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 841a9365d5fd..ba7b14a13ab7 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1185,6 +1185,54 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple devices and PnP. + Module snd-msnd-classic + ----------------------- + + Module for Turtle Beach MultiSound Classic, Tahiti or Monterey + soundcards. + + io - Port # for msnd-classic card + irq - IRQ # for msnd-classic card + mem - Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, + 0xe0000 or 0xe8000) + write_ndelay - enable write ndelay (default = 1) + calibrate_signal - calibrate signal (default = 0) + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + digital - Digital daughterboard present (default = 0) + cfg - Config port (0x250, 0x260 or 0x270) default = PnP + reset - Reset all devices + mpu_io - MPU401 I/O port + mpu_irq - MPU401 irq# + ide_io0 - IDE port #0 + ide_io1 - IDE port #1 + ide_irq - IDE irq# + joystick_io - Joystick I/O port + + The driver requires firmware files "turtlebeach/msndinit.bin" and + "turtlebeach/msndperm.bin" in the proper firmware directory. + + See Documentation/sound/oss/MultiSound for important information + about this driver. Note that it has been discontinued, but the + Voyetra Turtle Beach knowledge base entry for it is still available + at + http://www.turtlebeach.com/site/kb_ftp/790.asp + + Module snd-msnd-pinnacle + ------------------------ + + Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards. + + io - Port # for pinnacle/fiji card + irq - IRQ # for pinnalce/fiji card + mem - Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000, + 0xe0000 or 0xe8000) + write_ndelay - enable write ndelay (default = 1) + calibrate_signal - calibrate signal (default = 0) + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + The driver requires firmware files "turtlebeach/pndspini.bin" and + "turtlebeach/pndsperm.bin" in the proper firmware directory. + Module snd-mtpav ---------------- -- cgit v1.2.3 From a5f7c47391ca15c3e2f8e2aa46fb089408541bcd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 28 Jan 2009 09:02:52 +0100 Subject: ALSA: enable build of snd-msnd-* drivers Added the missing msnd directory to Makefile. Signed-off-by: Takashi Iwai --- sound/isa/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/Makefile b/sound/isa/Makefile index 63af13d901a5..b906b9a1a81e 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -26,5 +26,5 @@ obj-$(CONFIG_SND_SC6000) += snd-sc6000.o obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o obj-$(CONFIG_SND_SSCAPE) += snd-sscape.o -obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ gus/ opti9xx/ \ +obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ gus/ msnd/ opti9xx/ \ sb/ wavefront/ wss/ -- cgit v1.2.3 From e3e9c5e7096f6379ca8fa78413b2055fa29f4530 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 28 Jan 2009 12:40:42 -0200 Subject: ALSA: Don't cold reset AC97 codecs in some ICH chipsets Check in a quirk list if it should do cold reset when AC97 power saving is enabled. Some devices do not resume properly when cold reset, although power saving works OK. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 68 +++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 52 insertions(+), 16 deletions(-) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 19d3391e229f..b37bd268301f 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2287,23 +2287,23 @@ static void do_ali_reset(struct intel8x0 *chip) iputdword(chip, ICHREG(ALI_INTERRUPTSR), 0x00000000); } -static int snd_intel8x0_ich_chip_init(struct intel8x0 *chip, int probing) -{ - unsigned long end_time; - unsigned int cnt, status, nstatus; - - /* put logic to right state */ - /* first clear status bits */ - status = ICH_RCS | ICH_MCINT | ICH_POINT | ICH_PIINT; - if (chip->device_type == DEVICE_NFORCE) - status |= ICH_NVSPINT; - cnt = igetdword(chip, ICHREG(GLOB_STA)); - iputdword(chip, ICHREG(GLOB_STA), cnt & status); +#ifdef CONFIG_SND_AC97_POWER_SAVE +static struct snd_pci_quirk ich_chip_reset_mode[] = { + SND_PCI_QUIRK(0x1014, 0x051f, "Thinkpad R32", 1), + { } /* end */ +}; +static int snd_intel8x0_ich_chip_cold_reset(struct intel8x0 *chip) +{ + unsigned int cnt; /* ACLink on, 2 channels */ + + if (snd_pci_quirk_lookup(chip->pci, ich_chip_reset_mode)) + return -EIO; + cnt = igetdword(chip, ICHREG(GLOB_CNT)); cnt &= ~(ICH_ACLINK | ICH_PCM_246_MASK); -#ifdef CONFIG_SND_AC97_POWER_SAVE + /* do cold reset - the full ac97 powerdown may leave the controller * in a warm state but actually it cannot communicate with the codec. */ @@ -2312,22 +2312,58 @@ static int snd_intel8x0_ich_chip_init(struct intel8x0 *chip, int probing) udelay(10); iputdword(chip, ICHREG(GLOB_CNT), cnt | ICH_AC97COLD); msleep(1); + return 0; +} +#define snd_intel8x0_ich_chip_can_cold_reset(chip) \ + (!snd_pci_quirk_lookup(chip->pci, ich_chip_reset_mode)) #else +#define snd_intel8x0_ich_chip_cold_reset(x) do { } while (0) +#define snd_intel8x0_ich_chip_can_cold_reset(chip) (0) +#endif + +static int snd_intel8x0_ich_chip_reset(struct intel8x0 *chip) +{ + unsigned long end_time; + unsigned int cnt; + /* ACLink on, 2 channels */ + cnt = igetdword(chip, ICHREG(GLOB_CNT)); + cnt &= ~(ICH_ACLINK | ICH_PCM_246_MASK); /* finish cold or do warm reset */ cnt |= (cnt & ICH_AC97COLD) == 0 ? ICH_AC97COLD : ICH_AC97WARM; iputdword(chip, ICHREG(GLOB_CNT), cnt); end_time = (jiffies + (HZ / 4)) + 1; do { if ((igetdword(chip, ICHREG(GLOB_CNT)) & ICH_AC97WARM) == 0) - goto __ok; + return 0; schedule_timeout_uninterruptible(1); } while (time_after_eq(end_time, jiffies)); snd_printk(KERN_ERR "AC'97 warm reset still in progress? [0x%x]\n", igetdword(chip, ICHREG(GLOB_CNT))); return -EIO; +} + +static int snd_intel8x0_ich_chip_init(struct intel8x0 *chip, int probing) +{ + unsigned long end_time; + unsigned int status, nstatus; + unsigned int cnt; + int err; + + /* put logic to right state */ + /* first clear status bits */ + status = ICH_RCS | ICH_MCINT | ICH_POINT | ICH_PIINT; + if (chip->device_type == DEVICE_NFORCE) + status |= ICH_NVSPINT; + cnt = igetdword(chip, ICHREG(GLOB_STA)); + iputdword(chip, ICHREG(GLOB_STA), cnt & status); + + if (snd_intel8x0_ich_chip_can_cold_reset(chip)) + err = snd_intel8x0_ich_chip_cold_reset(chip); + else + err = snd_intel8x0_ich_chip_reset(chip); + if (err < 0) + return err; - __ok: -#endif if (probing) { /* wait for any codec ready status. * Once it becomes ready it should remain ready -- cgit v1.2.3 From e167280070cccd2e0cde94f73ded0a4b08bf6412 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 28 Jan 2009 16:05:16 +0100 Subject: ALSA: intel8x0 - Fix build with CONFIG_SND_AC97_POWERSAVE=n Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index b37bd268301f..b13ef1e2a4a3 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2317,7 +2317,7 @@ static int snd_intel8x0_ich_chip_cold_reset(struct intel8x0 *chip) #define snd_intel8x0_ich_chip_can_cold_reset(chip) \ (!snd_pci_quirk_lookup(chip->pci, ich_chip_reset_mode)) #else -#define snd_intel8x0_ich_chip_cold_reset(x) do { } while (0) +#define snd_intel8x0_ich_chip_cold_reset(chip) 0 #define snd_intel8x0_ich_chip_can_cold_reset(chip) (0) #endif -- cgit v1.2.3 From 61b9b9b109217b2bfb128c3ca24d8f8c839a425f Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 28 Jan 2009 09:16:33 -0200 Subject: ALSA: hda - Consider additional capture source/selector in ALC889 Currently code for capture source support in ALC889 only considers capture mixers. This change adds additional support for ADC+selector present in ALC889, taking into account also the presence of an additional DMIC connection item in the selector. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 105 +++++++++++++++++++++++++++++++----------- 1 file changed, 77 insertions(+), 28 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 863ab957204b..d81cb5eb8c5f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -238,6 +238,13 @@ enum { ALC883_MODEL_LAST, }; +/* styles of capture selection */ +enum { + CAPT_MUX = 0, /* only mux based */ + CAPT_MIX, /* only mixer based */ + CAPT_1MUX_MIX, /* first mux and other mixers */ +}; + /* for GPIO Poll */ #define GPIO_MASK 0x03 @@ -276,7 +283,7 @@ struct alc_spec { hda_nid_t *adc_nids; hda_nid_t *capsrc_nids; hda_nid_t dig_in_nid; /* digital-in NID; optional */ - unsigned char is_mix_capture; /* matrix-style capture (non-mux) */ + int capture_style; /* capture style (CAPT_*) */ /* capture source */ unsigned int num_mux_defs; @@ -294,7 +301,7 @@ struct alc_spec { /* dynamic controls, init_verbs and input_mux */ struct auto_pin_cfg autocfg; struct snd_array kctls; - struct hda_input_mux private_imux; + struct hda_input_mux private_imux[3]; hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; /* hooks */ @@ -396,7 +403,8 @@ static int alc_mux_enum_put(struct snd_kcontrol *kcontrol, mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx; imux = &spec->input_mux[mux_idx]; - if (spec->is_mix_capture) { + if (spec->capture_style && + !(spec->capture_style == CAPT_1MUX_MIX && !adc_idx)) { /* Matrix-mixer style (e.g. ALC882) */ unsigned int *cur_val = &spec->cur_mux[adc_idx]; unsigned int i, idx; @@ -4130,7 +4138,7 @@ static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { - struct hda_input_mux *imux = &spec->private_imux; + struct hda_input_mux *imux = &spec->private_imux[0]; int i, err, idx; for (i = 0; i < AUTO_PIN_LAST; i++) { @@ -4279,7 +4287,7 @@ static int alc880_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc880_volume_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; store_pin_configs(codec); return 1; @@ -5487,7 +5495,7 @@ static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec, static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { - struct hda_input_mux *imux = &spec->private_imux; + struct hda_input_mux *imux = &spec->private_imux[0]; int i, err, idx; for (i = 0; i < AUTO_PIN_LAST; i++) { @@ -5647,7 +5655,7 @@ static int alc260_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc260_volume_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; store_pin_configs(codec); return 1; @@ -7087,7 +7095,7 @@ static int patch_alc882(struct hda_codec *codec) spec->stream_digital_playback = &alc882_pcm_digital_playback; spec->stream_digital_capture = &alc882_pcm_digital_capture; - spec->is_mix_capture = 1; /* matrix-style capture */ + spec->capture_style = CAPT_MIX; /* matrix-style capture */ if (!spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, 0x07); @@ -7155,10 +7163,14 @@ static hda_nid_t alc883_adc_nids_rev[2] = { 0x09, 0x08 }; +#define alc889_adc_nids alc880_adc_nids + static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 }; static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 }; +#define alc889_capsrc_nids alc882_capsrc_nids + /* input MUX */ /* FIXME: should be a matrix-type input source selection */ @@ -8977,6 +8989,8 @@ static int alc883_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err = alc880_parse_auto_config(codec); + struct auto_pin_cfg *cfg = &spec->autocfg; + int i; if (err < 0) return err; @@ -8990,6 +9004,26 @@ static int alc883_parse_auto_config(struct hda_codec *codec) /* hack - override the init verbs */ spec->init_verbs[0] = alc883_auto_init_verbs; + /* setup input_mux for ALC889 */ + if (codec->vendor_id == 0x10ec0889) { + /* digital-mic input pin is excluded in alc880_auto_create..() + * because it's under 0x18 + */ + if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 || + cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) { + struct hda_input_mux *imux = &spec->private_imux[0]; + for (i = 1; i < 3; i++) + memcpy(&spec->private_imux[i], + &spec->private_imux[0], + sizeof(spec->private_imux[0])); + imux->items[imux->num_items].label = "Int DMic"; + imux->items[imux->num_items].index = 0x0b; + imux->num_items++; + spec->num_mux_defs = 3; + spec->input_mux = spec->private_imux; + } + } + return 1; /* config found */ } @@ -9053,14 +9087,36 @@ static int patch_alc883(struct hda_codec *codec) spec->stream_name_analog = "ALC888 Analog"; spec->stream_name_digital = "ALC888 Digital"; } + if (!spec->num_adc_nids) { + spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); + spec->adc_nids = alc883_adc_nids; + } + if (!spec->capsrc_nids) + spec->capsrc_nids = alc883_capsrc_nids; + spec->capture_style = CAPT_MIX; /* matrix-style capture */ break; case 0x10ec0889: spec->stream_name_analog = "ALC889 Analog"; spec->stream_name_digital = "ALC889 Digital"; + if (!spec->num_adc_nids) { + spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids); + spec->adc_nids = alc889_adc_nids; + } + if (!spec->capsrc_nids) + spec->capsrc_nids = alc889_capsrc_nids; + spec->capture_style = CAPT_1MUX_MIX; /* 1mux/Nmix-style + capture */ break; default: spec->stream_name_analog = "ALC883 Analog"; spec->stream_name_digital = "ALC883 Digital"; + if (!spec->num_adc_nids) { + spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); + spec->adc_nids = alc883_adc_nids; + } + if (!spec->capsrc_nids) + spec->capsrc_nids = alc883_capsrc_nids; + spec->capture_style = CAPT_MIX; /* matrix-style capture */ break; } @@ -9071,13 +9127,6 @@ static int patch_alc883(struct hda_codec *codec) spec->stream_digital_playback = &alc883_pcm_digital_playback; spec->stream_digital_capture = &alc883_pcm_digital_capture; - if (!spec->num_adc_nids) { - spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); - spec->adc_nids = alc883_adc_nids; - } - if (!spec->capsrc_nids) - spec->capsrc_nids = alc883_capsrc_nids; - spec->is_mix_capture = 1; /* matrix-style capture */ if (!spec->cap_mixer) set_capture_mixer(spec); @@ -10512,7 +10561,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc262_volume_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; err = alc_auto_add_mic_boost(codec); if (err < 0) @@ -10881,7 +10930,7 @@ static int patch_alc262(struct hda_codec *codec) spec->stream_digital_playback = &alc262_pcm_digital_playback; spec->stream_digital_capture = &alc262_pcm_digital_capture; - spec->is_mix_capture = 1; + spec->capture_style = CAPT_MIX; if (!spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, 0x07); @@ -11539,7 +11588,7 @@ static int alc268_auto_create_multi_out_ctls(struct alc_spec *spec, static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { - struct hda_input_mux *imux = &spec->private_imux; + struct hda_input_mux *imux = &spec->private_imux[0]; int i, idx1; for (i = 0; i < AUTO_PIN_LAST; i++) { @@ -11657,7 +11706,7 @@ static int alc268_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc268_volume_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; err = alc_auto_add_mic_boost(codec); if (err < 0) @@ -12511,7 +12560,7 @@ static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec, */ if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 || cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) { - struct hda_input_mux *imux = &spec->private_imux; + struct hda_input_mux *imux = &spec->private_imux[0]; imux->items[imux->num_items].label = "Int Mic"; imux->items[imux->num_items].index = 0x05; imux->num_items++; @@ -12567,7 +12616,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc269_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; /* set default input source */ snd_hda_codec_write_cache(codec, alc269_capsrc_nids[0], 0, AC_VERB_SET_CONNECT_SEL, @@ -13483,7 +13532,7 @@ static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin) static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { - struct hda_input_mux *imux = &spec->private_imux; + struct hda_input_mux *imux = &spec->private_imux[0]; int i, err, idx, idx1; for (i = 0; i < AUTO_PIN_LAST; i++) { @@ -13620,7 +13669,7 @@ static int alc861_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc861_auto_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; spec->adc_nids = alc861_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids); @@ -14724,7 +14773,7 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec) add_verb(spec, alc861vd_volume_init_verbs); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; err = alc_auto_add_mic_boost(codec); if (err < 0) @@ -14803,7 +14852,7 @@ static int patch_alc861vd(struct hda_codec *codec) spec->adc_nids = alc861vd_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids); spec->capsrc_nids = alc861vd_capsrc_nids; - spec->is_mix_capture = 1; + spec->capture_style = CAPT_MIX; set_capture_mixer(spec); @@ -16397,7 +16446,7 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin, static int alc662_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { - struct hda_input_mux *imux = &spec->private_imux; + struct hda_input_mux *imux = &spec->private_imux[0]; int i, err, idx; for (i = 0; i < AUTO_PIN_LAST; i++) { @@ -16528,7 +16577,7 @@ static int alc662_parse_auto_config(struct hda_codec *codec) add_mixer(spec, spec->kctls.list); spec->num_mux_defs = 1; - spec->input_mux = &spec->private_imux; + spec->input_mux = &spec->private_imux[0]; add_verb(spec, alc662_auto_init_verbs); if (codec->vendor_id == 0x10ec0663) @@ -16613,7 +16662,7 @@ static int patch_alc662(struct hda_codec *codec) spec->adc_nids = alc662_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids); spec->capsrc_nids = alc662_capsrc_nids; - spec->is_mix_capture = 1; + spec->capture_style = CAPT_MIX; if (!spec->cap_mixer) set_capture_mixer(spec); -- cgit v1.2.3 From 42990701f938b9318e46102d9919ceb28e5b0e6d Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Tue, 20 Jan 2009 21:14:37 +0000 Subject: sh: Relax inline assembly constraints When dereferencing the memory address contained in a register and modifying the value at that memory address, the register should not be listed in the inline asm outputs. The value at the memory address is an output (which is taken care of with the "memory" clobber), not the register. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/include/asm/bitops-llsc.h | 72 +++++++++++++++++++------------------- arch/sh/include/asm/cmpxchg-llsc.h | 38 ++++++++++---------- 2 files changed, 55 insertions(+), 55 deletions(-) diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h index 1d2fc0b010ad..d8328be06191 100644 --- a/arch/sh/include/asm/bitops-llsc.h +++ b/arch/sh/include/asm/bitops-llsc.h @@ -1,7 +1,7 @@ #ifndef __ASM_SH_BITOPS_LLSC_H #define __ASM_SH_BITOPS_LLSC_H -static inline void set_bit(int nr, volatile void * addr) +static inline void set_bit(int nr, volatile void *addr) { int mask; volatile unsigned int *a = addr; @@ -13,16 +13,16 @@ static inline void set_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" "movli.l @%1, %0 ! set_bit \n\t" - "or %3, %0 \n\t" + "or %2, %0 \n\t" "movco.l %0, @%1 \n\t" "bf 1b \n\t" - : "=&z" (tmp), "=r" (a) - : "1" (a), "r" (mask) + : "=&z" (tmp) + : "r" (a), "r" (mask) : "t", "memory" ); } -static inline void clear_bit(int nr, volatile void * addr) +static inline void clear_bit(int nr, volatile void *addr) { int mask; volatile unsigned int *a = addr; @@ -34,16 +34,16 @@ static inline void clear_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" "movli.l @%1, %0 ! clear_bit \n\t" - "and %3, %0 \n\t" + "and %2, %0 \n\t" "movco.l %0, @%1 \n\t" "bf 1b \n\t" - : "=&z" (tmp), "=r" (a) - : "1" (a), "r" (~mask) + : "=&z" (tmp) + : "r" (a), "r" (~mask) : "t", "memory" ); } -static inline void change_bit(int nr, volatile void * addr) +static inline void change_bit(int nr, volatile void *addr) { int mask; volatile unsigned int *a = addr; @@ -55,16 +55,16 @@ static inline void change_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" "movli.l @%1, %0 ! change_bit \n\t" - "xor %3, %0 \n\t" + "xor %2, %0 \n\t" "movco.l %0, @%1 \n\t" "bf 1b \n\t" - : "=&z" (tmp), "=r" (a) - : "1" (a), "r" (mask) + : "=&z" (tmp) + : "r" (a), "r" (mask) : "t", "memory" ); } -static inline int test_and_set_bit(int nr, volatile void * addr) +static inline int test_and_set_bit(int nr, volatile void *addr) { int mask, retval; volatile unsigned int *a = addr; @@ -75,21 +75,21 @@ static inline int test_and_set_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! test_and_set_bit \n\t" - "mov %0, %2 \n\t" - "or %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! test_and_set_bit \n\t" + "mov %0, %1 \n\t" + "or %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" - "and %4, %2 \n\t" - : "=&z" (tmp), "=r" (a), "=&r" (retval) - : "1" (a), "r" (mask) + "and %3, %1 \n\t" + : "=&z" (tmp), "=&r" (retval) + : "r" (a), "r" (mask) : "t", "memory" ); return retval != 0; } -static inline int test_and_clear_bit(int nr, volatile void * addr) +static inline int test_and_clear_bit(int nr, volatile void *addr) { int mask, retval; volatile unsigned int *a = addr; @@ -100,22 +100,22 @@ static inline int test_and_clear_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! test_and_clear_bit \n\t" - "mov %0, %2 \n\t" - "and %5, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! test_and_clear_bit \n\t" + "mov %0, %1 \n\t" + "and %4, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" - "and %4, %2 \n\t" + "and %3, %1 \n\t" "synco \n\t" - : "=&z" (tmp), "=r" (a), "=&r" (retval) - : "1" (a), "r" (mask), "r" (~mask) + : "=&z" (tmp), "=&r" (retval) + : "r" (a), "r" (mask), "r" (~mask) : "t", "memory" ); return retval != 0; } -static inline int test_and_change_bit(int nr, volatile void * addr) +static inline int test_and_change_bit(int nr, volatile void *addr) { int mask, retval; volatile unsigned int *a = addr; @@ -126,15 +126,15 @@ static inline int test_and_change_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! test_and_change_bit \n\t" - "mov %0, %2 \n\t" - "xor %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! test_and_change_bit \n\t" + "mov %0, %1 \n\t" + "xor %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" - "and %4, %2 \n\t" + "and %3, %1 \n\t" "synco \n\t" - : "=&z" (tmp), "=r" (a), "=&r" (retval) - : "1" (a), "r" (mask) + : "=&z" (tmp), "=&r" (retval) + : "r" (a), "r" (mask) : "t", "memory" ); diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h index aee3bf286581..0fac3da536ca 100644 --- a/arch/sh/include/asm/cmpxchg-llsc.h +++ b/arch/sh/include/asm/cmpxchg-llsc.h @@ -8,14 +8,14 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! xchg_u32 \n\t" - "mov %0, %2 \n\t" - "mov %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! xchg_u32 \n\t" + "mov %0, %1 \n\t" + "mov %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" "synco \n\t" - : "=&z"(tmp), "=r" (m), "=&r" (retval) - : "1" (m), "r" (val) + : "=&z"(tmp), "=&r" (retval) + : "r" (m), "r" (val) : "t", "memory" ); @@ -29,14 +29,14 @@ static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! xchg_u8 \n\t" - "mov %0, %2 \n\t" - "mov %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! xchg_u8 \n\t" + "mov %0, %1 \n\t" + "mov %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" "synco \n\t" - : "=&z"(tmp), "=r" (m), "=&r" (retval) - : "1" (m), "r" (val & 0xff) + : "=&z"(tmp), "=&r" (retval) + : "r" (m), "r" (val & 0xff) : "t", "memory" ); @@ -51,17 +51,17 @@ __cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! __cmpxchg_u32 \n\t" - "mov %0, %2 \n\t" - "cmp/eq %2, %4 \n\t" + "movli.l @%2, %0 ! __cmpxchg_u32 \n\t" + "mov %0, %1 \n\t" + "cmp/eq %1, %3 \n\t" "bf 2f \n\t" - "mov %5, %0 \n\t" + "mov %3, %0 \n\t" "2: \n\t" - "movco.l %0, @%1 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" "synco \n\t" - : "=&z" (tmp), "=r" (m), "=&r" (retval) - : "1" (m), "r" (old), "r" (new) + : "=&z" (tmp), "=&r" (retval) + : "r" (m), "r" (old), "r" (new) : "t", "memory" ); -- cgit v1.2.3 From 84fdf6cda30df72994baa2496da86787fb44cbb4 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Tue, 20 Jan 2009 21:14:38 +0000 Subject: sh: Use the atomic_t "counter" member Now that atomic_t is a generic opaque type for all architectures, it is unwise to use intimate knowledge of its internals when manipulating it. Instead of relying on the "counter" member being at offset 0 from the beginning of an atomic_t, explicitly reference the member. This guards us from any changes to the layout of the beginning of the atomic_t type. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/include/asm/atomic-irq.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h index 74f7943cff6f..a0b348068cae 100644 --- a/arch/sh/include/asm/atomic-irq.h +++ b/arch/sh/include/asm/atomic-irq.h @@ -11,7 +11,7 @@ static inline void atomic_add(int i, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v += i; + v->counter += i; local_irq_restore(flags); } @@ -20,7 +20,7 @@ static inline void atomic_sub(int i, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v -= i; + v->counter -= i; local_irq_restore(flags); } @@ -29,9 +29,9 @@ static inline int atomic_add_return(int i, atomic_t *v) unsigned long temp, flags; local_irq_save(flags); - temp = *(long *)v; + temp = v->counter; temp += i; - *(long *)v = temp; + v->counter = temp; local_irq_restore(flags); return temp; @@ -42,9 +42,9 @@ static inline int atomic_sub_return(int i, atomic_t *v) unsigned long temp, flags; local_irq_save(flags); - temp = *(long *)v; + temp = v->counter; temp -= i; - *(long *)v = temp; + v->counter = temp; local_irq_restore(flags); return temp; @@ -55,7 +55,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v &= ~mask; + v->counter &= ~mask; local_irq_restore(flags); } @@ -64,7 +64,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v |= mask; + v->counter |= mask; local_irq_restore(flags); } -- cgit v1.2.3 From dc66ff6220f0a6c938df41add526d645852d9a75 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 22 Jan 2009 15:16:14 +0000 Subject: SH: fix start_thread and user_stack_pointer macros Fix macros start_thread and user_stack_pointer. When these macros aren't called with a variable named regs as second argument, this will result in a build failure. Signed-off-by: Roel Kluin Signed-off-by: Paul Mundt --- arch/sh/include/asm/kprobes.h | 2 +- arch/sh/include/asm/processor_32.h | 12 ++++++------ arch/sh/include/asm/processor_64.h | 14 +++++++------- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h index 6078d8e551d4..613644a758e8 100644 --- a/arch/sh/include/asm/kprobes.h +++ b/arch/sh/include/asm/kprobes.h @@ -16,7 +16,7 @@ typedef u16 kprobe_opcode_t; ? (MAX_STACK_SIZE) \ : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) -#define regs_return_value(regs) ((regs)->regs[0]) +#define regs_return_value(_regs) ((_regs)->regs[0]) #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index d79063c5eb9c..dcaed24c71fc 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -108,12 +108,12 @@ extern int ubc_usercnt; /* * Do necessary setup to start up a newly executed thread. */ -#define start_thread(regs, new_pc, new_sp) \ +#define start_thread(_regs, new_pc, new_sp) \ set_fs(USER_DS); \ - regs->pr = 0; \ - regs->sr = SR_FD; /* User mode. */ \ - regs->pc = new_pc; \ - regs->regs[15] = new_sp + _regs->pr = 0; \ + _regs->sr = SR_FD; /* User mode. */ \ + _regs->pc = new_pc; \ + _regs->regs[15] = new_sp /* Forward declaration, a strange C thing */ struct task_struct; @@ -189,7 +189,7 @@ extern unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) -#define user_stack_pointer(regs) ((regs)->regs[15]) +#define user_stack_pointer(_regs) ((_regs)->regs[15]) #if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ defined(CONFIG_CPU_SH4) diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h index 803177fcf086..5727d31b0ccf 100644 --- a/arch/sh/include/asm/processor_64.h +++ b/arch/sh/include/asm/processor_64.h @@ -145,13 +145,13 @@ struct thread_struct { */ #define SR_USER (SR_MMU | SR_FD) -#define start_thread(regs, new_pc, new_sp) \ +#define start_thread(_regs, new_pc, new_sp) \ set_fs(USER_DS); \ - regs->sr = SR_USER; /* User mode. */ \ - regs->pc = new_pc - 4; /* Compensate syscall exit */ \ - regs->pc |= 1; /* Set SHmedia ! */ \ - regs->regs[18] = 0; \ - regs->regs[15] = new_sp + _regs->sr = SR_USER; /* User mode. */ \ + _regs->pc = new_pc - 4; /* Compensate syscall exit */ \ + _regs->pc |= 1; /* Set SHmedia ! */ \ + _regs->regs[18] = 0; \ + _regs->regs[15] = new_sp /* Forward declaration, a strange C thing */ struct task_struct; @@ -226,7 +226,7 @@ extern unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) ((tsk)->thread.pc) #define KSTK_ESP(tsk) ((tsk)->thread.sp) -#define user_stack_pointer(regs) ((regs)->regs[15]) +#define user_stack_pointer(_regs) ((_regs)->regs[15]) #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_PROCESSOR_64_H */ -- cgit v1.2.3 From 328cc6dfaadad614449eca1c75559e64c5054fea Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 28 Jan 2009 15:39:22 -0200 Subject: ALSA: AC97: Print AC97 flags in proc file to make debug it easier While debugging some code paths in AC97 codec patches and its suspend and resume functions, getting to know the flags has proved useful to follow those code paths. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_proc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/ac97/ac97_proc.c b/sound/pci/ac97/ac97_proc.c index 060ea59d5f02..73b17d526c8b 100644 --- a/sound/pci/ac97/ac97_proc.c +++ b/sound/pci/ac97/ac97_proc.c @@ -125,6 +125,8 @@ static void snd_ac97_proc_read_main(struct snd_ac97 *ac97, struct snd_info_buffe snd_iprintf(buffer, "PCI Subsys Device: 0x%04x\n\n", ac97->subsystem_device); + snd_iprintf(buffer, "Flags: %x\n", ac97->flags); + if ((ac97->ext_id & AC97_EI_REV_MASK) >= AC97_EI_REV_23) { val = snd_ac97_read(ac97, AC97_INT_PAGING); snd_ac97_update_bits(ac97, AC97_INT_PAGING, -- cgit v1.2.3 From b833b5ec0411adc2255053a0e0ec536d97e5784e Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 28 Jan 2009 18:20:06 -0200 Subject: ALSA: AC97: Fix function name type in comment s/updat/update/ Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index e2b843b4f9d0..27551e963e52 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -383,7 +383,7 @@ int snd_ac97_update_bits(struct snd_ac97 *ac97, unsigned short reg, unsigned sho EXPORT_SYMBOL(snd_ac97_update_bits); -/* no lock version - see snd_ac97_updat_bits() */ +/* no lock version - see snd_ac97_update_bits() */ int snd_ac97_update_bits_nolock(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value) { -- cgit v1.2.3 From 955c0778723501cc16fec40501cd54b7e72d3e74 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 Jan 2009 09:55:31 +0000 Subject: sh: rework clocksource and sched_clock Rework and simplify the sched_clock and clocksource code. Instead of registering the clocksource in a shared file we move it into the tmu driver. Also, add code to handle sched_clock in the case of no clocksource. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/timer.h | 4 +-- arch/sh/kernel/time_32.c | 59 ++++++--------------------------------- arch/sh/kernel/timers/timer-tmu.c | 10 +++++-- 3 files changed, 19 insertions(+), 54 deletions(-) diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index a7ca3a195bb5..4c3b66e30af2 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -9,7 +9,6 @@ struct sys_timer_ops { int (*init)(void); int (*start)(void); int (*stop)(void); - cycle_t (*read)(void); #ifndef CONFIG_GENERIC_TIME unsigned long (*get_offset)(void); #endif @@ -39,6 +38,7 @@ struct sys_timer *get_sys_timer(void); /* arch/sh/kernel/time.c */ void handle_timer_tick(void); -extern unsigned long sh_hpt_frequency; + +extern struct clocksource clocksource_sh; #endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 8457f83242c5..ca22eef669ae 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -41,14 +41,6 @@ static int null_rtc_set_time(const time_t secs) return 0; } -/* - * Null high precision timer functions for systems lacking one. - */ -static cycle_t null_hpt_read(void) -{ - return 0; -} - void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; @@ -200,42 +192,21 @@ device_initcall(timer_init_sysfs); void (*board_time_init)(void); -/* - * Shamelessly based on the MIPS and Sparc64 work. - */ -static unsigned long timer_ticks_per_nsec_quotient __read_mostly; -unsigned long sh_hpt_frequency = 0; - -#define NSEC_PER_CYC_SHIFT 10 - -static struct clocksource clocksource_sh = { +struct clocksource clocksource_sh = { .name = "SuperH", - .rating = 200, - .mask = CLOCKSOURCE_MASK(32), - .read = null_hpt_read, - .shift = 16, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init init_sh_clocksource(void) -{ - if (!sh_hpt_frequency || clocksource_sh.read == null_hpt_read) - return; - - clocksource_sh.mult = clocksource_hz2mult(sh_hpt_frequency, - clocksource_sh.shift); - - timer_ticks_per_nsec_quotient = - clocksource_hz2mult(sh_hpt_frequency, NSEC_PER_CYC_SHIFT); - - clocksource_register(&clocksource_sh); -} - #ifdef CONFIG_GENERIC_TIME unsigned long long sched_clock(void) { - unsigned long long ticks = clocksource_sh.read(); - return (ticks * timer_ticks_per_nsec_quotient) >> NSEC_PER_CYC_SHIFT; + unsigned long long cycles; + + /* jiffies based sched_clock if no clocksource is installed */ + if (!clocksource_sh.rating) + return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); + + cycles = clocksource_sh.read(); + return cyc2ns(&clocksource_sh, cycles); } #endif @@ -260,16 +231,4 @@ void __init time_init(void) */ sys_timer = get_sys_timer(); printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); - - - if (sys_timer->ops->read) - clocksource_sh.read = sys_timer->ops->read; - - init_sh_clocksource(); - - if (sh_hpt_frequency) - printk("Using %lu.%03lu MHz high precision timer.\n", - ((sh_hpt_frequency + 500) / 1000) / 1000, - ((sh_hpt_frequency + 500) / 1000) % 1000); - } diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 0db3f9510336..33a24fcf0a1d 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -254,7 +254,14 @@ static int tmu_timer_init(void) _tmu_start(TMU1); - sh_hpt_frequency = clk_get_rate(&tmu1_clk); + clocksource_sh.rating = 200; + clocksource_sh.mask = CLOCKSOURCE_MASK(32); + clocksource_sh.read = tmu_timer_read; + clocksource_sh.shift = 10; + clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk), + clocksource_sh.shift); + clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS; + clocksource_register(&clocksource_sh); tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC, tmu0_clockevent.shift); @@ -274,7 +281,6 @@ static struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, - .read = tmu_timer_read, }; struct sys_timer tmu_timer = { -- cgit v1.2.3 From 70f0800133b2a6d694c10908b8673a5327b3bfd6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 Jan 2009 09:55:40 +0000 Subject: sh: tmu disable support Add TMU disable support so we can use other clockevents. Also, setup the clockevent rating. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/timers/timer-tmu.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 33a24fcf0a1d..2b62f9cff22b 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -146,7 +146,14 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) _tmu_clear_status(TMU0); _tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT); - evt->event_handler(evt); + switch (tmu0_clockevent.mode) { + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_PERIODIC: + evt->event_handler(evt); + break; + default: + break; + } return IRQ_HANDLED; } @@ -271,6 +278,7 @@ static int tmu_timer_init(void) clockevent_delta2ns(1, &tmu0_clockevent); tmu0_clockevent.cpumask = cpumask_of(0); + tmu0_clockevent.rating = 100; clockevents_register_device(&tmu0_clockevent); -- cgit v1.2.3 From 07821d3310996746a2cf1e9c705ffe64223d1112 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 Jan 2009 09:55:49 +0000 Subject: sh: fix no sys_timer case Handle the case with a sys_timer set to NULL. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/time_32.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index ca22eef669ae..766554ba2a5b 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -181,7 +181,12 @@ static struct sysdev_class timer_sysclass = { static int __init timer_init_sysfs(void) { - int ret = sysdev_class_register(&timer_sysclass); + int ret; + + if (!sys_timer) + return 0; + + ret = sysdev_class_register(&timer_sysclass); if (ret != 0) return ret; @@ -230,5 +235,8 @@ void __init time_init(void) * initialized for us. */ sys_timer = get_sys_timer(); + if (unlikely(!sys_timer)) + panic("System timer missing.\n"); + printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); } -- cgit v1.2.3 From 3fb1b6ad0679ad671bd496712b2a088550ee86b2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 Jan 2009 09:55:59 +0000 Subject: sh: CMT clockevent platform driver SuperH CMT clockevent driver. Both 16-bit and 32-bit CMT versions are supported, but only 32-bit is tested. This driver contains support for both clockevents and clocksources, but no unregistration is supported at this point. Works fine as clock source and/or event in periodic or oneshot mode. Tested on sh7722 and sh7723, but should work with any cpu/architecture. This version is lacking clocksource and early platform driver support for now - this to minimize the amount of dependencies. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 8 + drivers/clocksource/Makefile | 1 + drivers/clocksource/sh_cmt.c | 615 +++++++++++++++++++++++++++++++++++++++++++ include/linux/sh_cmt.h | 13 + 4 files changed, 637 insertions(+) create mode 100644 drivers/clocksource/sh_cmt.c create mode 100644 include/linux/sh_cmt.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ebabe518e729..5407e1295e51 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -397,6 +397,14 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" +config SH_TIMER_CMT + def_bool n + prompt "CMT support" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + This enables build of the CMT system timer driver. + config SH_TMU def_bool y prompt "TMU timer support" diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 1525882190fd..1efb2879a94f 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o +obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c new file mode 100644 index 000000000000..7783b42f6914 --- /dev/null +++ b/drivers/clocksource/sh_cmt.c @@ -0,0 +1,615 @@ +/* + * SuperH Timer Support - CMT + * + * Copyright (C) 2008 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct sh_cmt_priv { + void __iomem *mapbase; + struct clk *clk; + unsigned long width; /* 16 or 32 bit version of hardware block */ + unsigned long overflow_bit; + unsigned long clear_bits; + struct irqaction irqaction; + struct platform_device *pdev; + + unsigned long flags; + unsigned long match_value; + unsigned long next_match_value; + unsigned long max_match_value; + unsigned long rate; + spinlock_t lock; + struct clock_event_device ced; + unsigned long total_cycles; +}; + +static DEFINE_SPINLOCK(sh_cmt_lock); + +#define CMSTR -1 /* shared register */ +#define CMCSR 0 /* channel register */ +#define CMCNT 1 /* channel register */ +#define CMCOR 2 /* channel register */ + +static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) +{ + struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == CMSTR) { + offs = 0; + base -= cfg->channel_offset; + } else + offs = reg_nr; + + if (p->width == 16) + offs <<= 1; + else { + offs <<= 2; + if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) + return ioread32(base + offs); + } + + return ioread16(base + offs); +} + +static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr, + unsigned long value) +{ + struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == CMSTR) { + offs = 0; + base -= cfg->channel_offset; + } else + offs = reg_nr; + + if (p->width == 16) + offs <<= 1; + else { + offs <<= 2; + if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) { + iowrite32(value, base + offs); + return; + } + } + + iowrite16(value, base + offs); +} + +static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, + int *has_wrapped) +{ + unsigned long v1, v2, v3; + + /* Make sure the timer value is stable. Stolen from acpi_pm.c */ + do { + v1 = sh_cmt_read(p, CMCNT); + v2 = sh_cmt_read(p, CMCNT); + v3 = sh_cmt_read(p, CMCNT); + } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) + || (v3 > v1 && v3 < v2))); + + *has_wrapped = sh_cmt_read(p, CMCSR) & p->overflow_bit; + return v2; +} + + +static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) +{ + struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + unsigned long flags, value; + + /* start stop register shared by multiple timer channels */ + spin_lock_irqsave(&sh_cmt_lock, flags); + value = sh_cmt_read(p, CMSTR); + + if (start) + value |= 1 << cfg->timer_bit; + else + value &= ~(1 << cfg->timer_bit); + + sh_cmt_write(p, CMSTR, value); + spin_unlock_irqrestore(&sh_cmt_lock, flags); +} + +static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) +{ + struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + int ret; + + /* enable clock */ + ret = clk_enable(p->clk); + if (ret) { + pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk); + return ret; + } + *rate = clk_get_rate(p->clk) / 8; + + /* make sure channel is disabled */ + sh_cmt_start_stop_ch(p, 0); + + /* configure channel, periodic mode and maximum timeout */ + if (p->width == 16) + sh_cmt_write(p, CMCSR, 0); + else + sh_cmt_write(p, CMCSR, 0x01a4); + + sh_cmt_write(p, CMCOR, 0xffffffff); + sh_cmt_write(p, CMCNT, 0); + + /* enable channel */ + sh_cmt_start_stop_ch(p, 1); + return 0; +} + +static void sh_cmt_disable(struct sh_cmt_priv *p) +{ + /* disable channel */ + sh_cmt_start_stop_ch(p, 0); + + /* stop clock */ + clk_disable(p->clk); +} + +/* private flags */ +#define FLAG_CLOCKEVENT (1 << 0) +#define FLAG_CLOCKSOURCE (1 << 1) +#define FLAG_REPROGRAM (1 << 2) +#define FLAG_SKIPEVENT (1 << 3) +#define FLAG_IRQCONTEXT (1 << 4) + +static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p, + int absolute) +{ + unsigned long new_match; + unsigned long value = p->next_match_value; + unsigned long delay = 0; + unsigned long now = 0; + int has_wrapped; + + now = sh_cmt_get_counter(p, &has_wrapped); + p->flags |= FLAG_REPROGRAM; /* force reprogram */ + + if (has_wrapped) { + /* we're competing with the interrupt handler. + * -> let the interrupt handler reprogram the timer. + * -> interrupt number two handles the event. + */ + p->flags |= FLAG_SKIPEVENT; + return; + } + + if (absolute) + now = 0; + + do { + /* reprogram the timer hardware, + * but don't save the new match value yet. + */ + new_match = now + value + delay; + if (new_match > p->max_match_value) + new_match = p->max_match_value; + + sh_cmt_write(p, CMCOR, new_match); + + now = sh_cmt_get_counter(p, &has_wrapped); + if (has_wrapped && (new_match > p->match_value)) { + /* we are changing to a greater match value, + * so this wrap must be caused by the counter + * matching the old value. + * -> first interrupt reprograms the timer. + * -> interrupt number two handles the event. + */ + p->flags |= FLAG_SKIPEVENT; + break; + } + + if (has_wrapped) { + /* we are changing to a smaller match value, + * so the wrap must be caused by the counter + * matching the new value. + * -> save programmed match value. + * -> let isr handle the event. + */ + p->match_value = new_match; + break; + } + + /* be safe: verify hardware settings */ + if (now < new_match) { + /* timer value is below match value, all good. + * this makes sure we won't miss any match events. + * -> save programmed match value. + * -> let isr handle the event. + */ + p->match_value = new_match; + break; + } + + /* the counter has reached a value greater + * than our new match value. and since the + * has_wrapped flag isn't set we must have + * programmed a too close event. + * -> increase delay and retry. + */ + if (delay) + delay <<= 1; + else + delay = 1; + + if (!delay) + pr_warning("sh_cmt: too long delay\n"); + + } while (delay); +} + +static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) +{ + unsigned long flags; + + if (delta > p->max_match_value) + pr_warning("sh_cmt: delta out of range\n"); + + spin_lock_irqsave(&p->lock, flags); + p->next_match_value = delta; + sh_cmt_clock_event_program_verify(p, 0); + spin_unlock_irqrestore(&p->lock, flags); +} + +static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) +{ + struct sh_cmt_priv *p = dev_id; + + /* clear flags */ + sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits); + + /* update clock source counter to begin with if enabled + * the wrap flag should be cleared by the timer specific + * isr before we end up here. + */ + if (p->flags & FLAG_CLOCKSOURCE) + p->total_cycles += p->match_value; + + if (!(p->flags & FLAG_REPROGRAM)) + p->next_match_value = p->max_match_value; + + p->flags |= FLAG_IRQCONTEXT; + + if (p->flags & FLAG_CLOCKEVENT) { + if (!(p->flags & FLAG_SKIPEVENT)) { + if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) { + p->next_match_value = p->max_match_value; + p->flags |= FLAG_REPROGRAM; + } + + p->ced.event_handler(&p->ced); + } + } + + p->flags &= ~FLAG_SKIPEVENT; + + if (p->flags & FLAG_REPROGRAM) { + p->flags &= ~FLAG_REPROGRAM; + sh_cmt_clock_event_program_verify(p, 1); + + if (p->flags & FLAG_CLOCKEVENT) + if ((p->ced.mode == CLOCK_EVT_MODE_SHUTDOWN) + || (p->match_value == p->next_match_value)) + p->flags &= ~FLAG_REPROGRAM; + } + + p->flags &= ~FLAG_IRQCONTEXT; + + return IRQ_HANDLED; +} + +static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + + if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) + ret = sh_cmt_enable(p, &p->rate); + + if (ret) + goto out; + p->flags |= flag; + + /* setup timeout if no clockevent */ + if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT))) + sh_cmt_set_next(p, p->max_match_value); + out: + spin_unlock_irqrestore(&p->lock, flags); + + return ret; +} + +static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) +{ + unsigned long flags; + unsigned long f; + + spin_lock_irqsave(&p->lock, flags); + + f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE); + p->flags &= ~flag; + + if (f && !(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) + sh_cmt_disable(p); + + /* adjust the timeout to maximum if only clocksource left */ + if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE)) + sh_cmt_set_next(p, p->max_match_value); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced) +{ + return container_of(ced, struct sh_cmt_priv, ced); +} + +static void sh_cmt_clock_event_start(struct sh_cmt_priv *p, int periodic) +{ + struct clock_event_device *ced = &p->ced; + + sh_cmt_start(p, FLAG_CLOCKEVENT); + + /* TODO: calculate good shift from rate and counter bit width */ + + ced->shift = 32; + ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift); + ced->max_delta_ns = clockevent_delta2ns(p->max_match_value, ced); + ced->min_delta_ns = clockevent_delta2ns(0x1f, ced); + + if (periodic) + sh_cmt_set_next(p, (p->rate + HZ/2) / HZ); + else + sh_cmt_set_next(p, p->max_match_value); +} + +static void sh_cmt_clock_event_mode(enum clock_event_mode mode, + struct clock_event_device *ced) +{ + struct sh_cmt_priv *p = ced_to_sh_cmt(ced); + + /* deal with old setting first */ + switch (ced->mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + sh_cmt_stop(p, FLAG_CLOCKEVENT); + break; + default: + break; + } + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_info("sh_cmt: %s used for periodic clock events\n", + ced->name); + sh_cmt_clock_event_start(p, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + pr_info("sh_cmt: %s used for oneshot clock events\n", + ced->name); + sh_cmt_clock_event_start(p, 0); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + sh_cmt_stop(p, FLAG_CLOCKEVENT); + break; + default: + break; + } +} + +static int sh_cmt_clock_event_next(unsigned long delta, + struct clock_event_device *ced) +{ + struct sh_cmt_priv *p = ced_to_sh_cmt(ced); + + BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT); + if (likely(p->flags & FLAG_IRQCONTEXT)) + p->next_match_value = delta; + else + sh_cmt_set_next(p, delta); + + return 0; +} + +static void sh_cmt_register_clockevent(struct sh_cmt_priv *p, + char *name, unsigned long rating) +{ + struct clock_event_device *ced = &p->ced; + + memset(ced, 0, sizeof(*ced)); + + ced->name = name; + ced->features = CLOCK_EVT_FEAT_PERIODIC; + ced->features |= CLOCK_EVT_FEAT_ONESHOT; + ced->rating = rating; + ced->cpumask = cpumask_of(0); + ced->set_next_event = sh_cmt_clock_event_next; + ced->set_mode = sh_cmt_clock_event_mode; + + pr_info("sh_cmt: %s used for clock events\n", ced->name); + ced->mult = 1; /* work around misplaced WARN_ON() in clockevents.c */ + clockevents_register_device(ced); +} + +int sh_cmt_register(struct sh_cmt_priv *p, char *name, + unsigned long clockevent_rating, + unsigned long clocksource_rating) +{ + if (p->width == (sizeof(p->max_match_value) * 8)) + p->max_match_value = ~0; + else + p->max_match_value = (1 << p->width) - 1; + + p->match_value = p->max_match_value; + spin_lock_init(&p->lock); + + if (clockevent_rating) + sh_cmt_register_clockevent(p, name, clockevent_rating); + + return 0; +} + +static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) +{ + struct sh_cmt_config *cfg = pdev->dev.platform_data; + struct resource *res; + int irq, ret; + ret = -ENXIO; + + memset(p, 0, sizeof(*p)); + p->pdev = pdev; + + if (!cfg) { + dev_err(&p->pdev->dev, "missing platform data\n"); + goto err0; + } + + platform_set_drvdata(pdev, p); + + res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&p->pdev->dev, "failed to get I/O memory\n"); + goto err0; + } + + irq = platform_get_irq(p->pdev, 0); + if (irq < 0) { + dev_err(&p->pdev->dev, "failed to get irq\n"); + goto err0; + } + + /* map memory, let mapbase point to our channel */ + p->mapbase = ioremap_nocache(res->start, resource_size(res)); + if (p->mapbase == NULL) { + pr_err("sh_cmt: failed to remap I/O memory\n"); + goto err0; + } + + /* request irq using setup_irq() (too early for request_irq()) */ + p->irqaction.name = cfg->name; + p->irqaction.handler = sh_cmt_interrupt; + p->irqaction.dev_id = p; + p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; + p->irqaction.mask = CPU_MASK_NONE; + ret = setup_irq(irq, &p->irqaction); + if (ret) { + pr_err("sh_cmt: failed to request irq %d\n", irq); + goto err1; + } + + /* get hold of clock */ + p->clk = clk_get(&p->pdev->dev, cfg->clk); + if (IS_ERR(p->clk)) { + pr_err("sh_cmt: cannot get clock \"%s\"\n", cfg->clk); + ret = PTR_ERR(p->clk); + goto err2; + } + + if (resource_size(res) == 6) { + p->width = 16; + p->overflow_bit = 0x80; + p->clear_bits = ~0xc0; + } else { + p->width = 32; + p->overflow_bit = 0x8000; + p->clear_bits = ~0xc000; + } + + return sh_cmt_register(p, cfg->name, + cfg->clockevent_rating, + cfg->clocksource_rating); + err2: + free_irq(irq, p); + err1: + iounmap(p->mapbase); + err0: + return ret; +} + +static int __devinit sh_cmt_probe(struct platform_device *pdev) +{ + struct sh_cmt_priv *p = platform_get_drvdata(pdev); + int ret; + + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + ret = sh_cmt_setup(p, pdev); + if (ret) { + kfree(p); + + platform_set_drvdata(pdev, NULL); + } + return ret; +} + +static int __devexit sh_cmt_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent and clocksource */ +} + +static struct platform_driver sh_cmt_device_driver = { + .probe = sh_cmt_probe, + .remove = __devexit_p(sh_cmt_remove), + .driver = { + .name = "sh_cmt", + } +}; + +static int __init sh_cmt_init(void) +{ + return platform_driver_register(&sh_cmt_device_driver); +} + +static void __exit sh_cmt_exit(void) +{ + platform_driver_unregister(&sh_cmt_device_driver); +} + +module_init(sh_cmt_init); +module_exit(sh_cmt_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("SuperH CMT Timer Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/sh_cmt.h b/include/linux/sh_cmt.h new file mode 100644 index 000000000000..68cacde5954f --- /dev/null +++ b/include/linux/sh_cmt.h @@ -0,0 +1,13 @@ +#ifndef __SH_CMT_H__ +#define __SH_CMT_H__ + +struct sh_cmt_config { + char *name; + unsigned long channel_offset; + int timer_bit; + char *clk; + unsigned long clockevent_rating; + unsigned long clocksource_rating; +}; + +#endif /* __SH_CMT_H__ */ -- cgit v1.2.3 From 424f59d04d7450555ef2bf1eb4a5e2cd2ecf08cd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 Jan 2009 09:56:09 +0000 Subject: sh: CMT platform data for sh7723/sh7722/sh7366/sh7343 CMT platform data for SuperH Mobile sh7723/sh7722/sh7343/sh7366. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 34 ++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 34 ++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 34 ++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 34 ++++++++++++++++++++++++++++++++++ 4 files changed, 136 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 4ff4dc64520c..c1549382c87c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,7 @@ #include #include #include +#include #include static struct resource iic0_resources[] = { @@ -140,6 +141,38 @@ static struct platform_device jpu_device = { .num_resources = ARRAY_SIZE(jpu_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -175,6 +208,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7343_devices[] __initdata = { + &cmt_device, &iic0_device, &iic1_device, &sci_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 839ae97a7fd2..93ecf8ed5c6c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -14,6 +14,7 @@ #include #include #include +#include #include static struct resource iic_resources[] = { @@ -147,6 +148,38 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -167,6 +200,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7366_devices[] __initdata = { + &cmt_device, &iic_device, &sci_device, &usb_host_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 5146afc156e0..0e5d204bc792 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -176,6 +177,38 @@ static struct platform_device jpu_device = { .num_resources = ARRAY_SIZE(jpu_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -209,6 +242,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7722_devices[] __initdata = { + &cmt_device, &rtc_device, &usbf_device, &iic_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 849770d780ae..5338dacbcfba 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -100,6 +101,38 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -221,6 +254,7 @@ static struct platform_device iic_device = { }; static struct platform_device *sh7723_devices[] __initdata = { + &cmt_device, &sci_device, &rtc_device, &iic_device, -- cgit v1.2.3 From f5ad881b425616741bf8696f70b2749abe54a936 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 29 Jan 2009 18:08:58 +0900 Subject: sh: Use SYS_SUPPORTS_CMT for managing CMT timer dependencies. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 43 ++++++++++++++++++++++++++++--------------- 1 file changed, 28 insertions(+), 15 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5407e1295e51..5784bcec1a16 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -107,6 +107,9 @@ config SYS_SUPPORTS_NUMA config SYS_SUPPORTS_PCI bool +config SYS_SUPPORTS_CMT + bool + config STACKTRACE_SUPPORT def_bool y @@ -188,6 +191,7 @@ choice config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 + select SYS_SUPPORTS_CMT # SH-2A Processor Support @@ -200,15 +204,18 @@ config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_MXG bool "Support MX-G processor" @@ -324,6 +331,7 @@ config CPU_SUBTYPE_SH7723 select CPU_SH4A select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_CMT help Select SH7723 if you have an SH-MobileR2 CPU. @@ -362,6 +370,7 @@ config CPU_SUBTYPE_SHX3 config CPU_SUBTYPE_SH7343 bool "Support SH7343 processor" select CPU_SH4AL_DSP + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7722 bool "Support SH7722 processor" @@ -369,6 +378,7 @@ config CPU_SUBTYPE_SH7722 select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7366 bool "Support SH7366 processor" @@ -376,6 +386,7 @@ config CPU_SUBTYPE_SH7366 select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_CMT # SH-5 Processor Support @@ -397,34 +408,36 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" -config SH_TIMER_CMT - def_bool n - prompt "CMT support" - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help - This enables build of the CMT system timer driver. - config SH_TMU - def_bool y - prompt "TMU timer support" + bool "TMU timer support" depends on CPU_SH3 || CPU_SH4 + default y select GENERIC_TIME select GENERIC_CLOCKEVENTS help This enables the use of the TMU as the system timer. config SH_CMT - def_bool y - prompt "CMT timer support" - depends on CPU_SH2 && !CPU_SUBTYPE_MXG + bool "CMT timer support" + depends on SYS_SUPPORTS_CMT + default y help This enables the use of the CMT as the system timer. +# +# Support for the new-style CMT driver. This will replace SH_CMT +# once its other dependencies are merged. +# +config SH_TIMER_CMT + bool "CMT clockevents driver" + depends on SYS_SUPPORTS_CMT && !SH_CMT + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + config SH_MTU2 - def_bool n - prompt "MTU2 timer support" + bool "MTU2 timer support" depends on CPU_SH2A + default y help This enables the use of the MTU2 as the system timer. -- cgit v1.2.3 From d63f3a5857906851b9c1a39e3871a97f4acc1005 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 29 Jan 2009 18:10:13 +0900 Subject: sh: Fix up MTU2 support for SH7203. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 ++- arch/sh/kernel/timers/timer-mtu2.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5784bcec1a16..c6faad734e57 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -447,7 +447,8 @@ config SH_TIMER_IRQ CPU_SUBTYPE_SH7763 default "86" if CPU_SUBTYPE_SH7619 default "140" if CPU_SUBTYPE_SH7206 - default "142" if CPU_SUBTYPE_SH7203 + default "142" if CPU_SUBTYPE_SH7203 && SH_CMT + default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2 default "238" if CPU_SUBTYPE_MXG default "16" diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index c3d237e1d566..9a77ae86b403 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -35,7 +35,8 @@ #define MTU2_TSR_1 0xfffe4385 #define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */ -#if defined(CONFIG_CPU_SUBTYPE_SH7201) +#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \ + defined(CONFIG_CPU_SUBTYPE_SH7203) #define MTU2_TGRA_1 0xfffe4388 #else #define MTU2_TGRA_1 0xfffe438a -- cgit v1.2.3 From c161e40f45d32b48f8facbee17720e708607002f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 29 Jan 2009 18:11:25 +0900 Subject: sh: Don't enable GENERIC_TIME for the CMT clockevent driver yet. GENERIC_TIME still depends on the clocksource bits being there, which is presently not supported. This allows the CMT clockevent driver to be used alongside alternate system timers that do not yet provide a clocksource of their own (MTU2 and so on in the case of SH-2A). Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 - arch/sh/kernel/time_32.c | 2 -- 2 files changed, 3 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c6faad734e57..50c992444e55 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -431,7 +431,6 @@ config SH_CMT config SH_TIMER_CMT bool "CMT clockevents driver" depends on SYS_SUPPORTS_CMT && !SH_CMT - select GENERIC_TIME select GENERIC_CLOCKEVENTS config SH_MTU2 diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 766554ba2a5b..c34e1e0f9b02 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -104,7 +104,6 @@ int do_settimeofday(struct timespec *tv) EXPORT_SYMBOL(do_settimeofday); #endif /* !CONFIG_GENERIC_TIME */ -#ifndef CONFIG_GENERIC_CLOCKEVENTS /* last time the RTC clock got updated */ static long last_rtc_update; @@ -148,7 +147,6 @@ void handle_timer_tick(void) update_process_times(user_mode(get_irq_regs())); #endif } -#endif /* !CONFIG_GENERIC_CLOCKEVENTS */ #ifdef CONFIG_PM int timer_suspend(struct sys_device *dev, pm_message_t state) -- cgit v1.2.3 From 56305757f0b64b7d5dd02fd54c6dfc0989868f31 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 29 Jan 2009 11:44:24 +0100 Subject: ALSA: sscape: update Kconfig description about SoundScape cards The SoundScape driver handles more cards then described. Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index ce0aa044e274..542c1ead14bd 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -377,14 +377,17 @@ config SND_SGALAXY will be called snd-sgalaxy. config SND_SSCAPE - tristate "Ensoniq SoundScape PnP driver" + tristate "Ensoniq SoundScape driver" select SND_HWDEP select SND_MPU401_UART select SND_WSS_LIB help - Say Y here to include support for Ensoniq SoundScape PnP + Say Y here to include support for Ensoniq SoundScape soundcards. + The PCM audio is supported on SoundScape Classic, Elite, PnP + and VIVO cards. The MIDI support is very experimental. + To compile this driver as a module, choose M here: the module will be called snd-sscape. -- cgit v1.2.3 From 0a898e6e500ec8ab98000896fe243c4c0e91c72a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 29 Jan 2009 11:46:45 +0100 Subject: ALSA: gus: update debug messages Convert some of them to snd_printdd() and update arguments to make them compilable. Signed-off-by: Takashi Iwai --- sound/isa/gus/gus_dma.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/sound/isa/gus/gus_dma.c b/sound/isa/gus/gus_dma.c index f45f6116c77a..cf8cd3c26a55 100644 --- a/sound/isa/gus/gus_dma.c +++ b/sound/isa/gus/gus_dma.c @@ -45,7 +45,8 @@ static void snd_gf1_dma_program(struct snd_gus_card * gus, unsigned char dma_cmd; unsigned int address_high; - // snd_printk("dma_transfer: addr=0x%x, buf=0x%lx, count=0x%x\n", addr, (long) buf, count); + snd_printdd("dma_transfer: addr=0x%x, buf=0x%lx, count=0x%x\n", + addr, buf_addr, count); if (gus->gf1.dma1 > 3) { if (gus->gf1.enh_mode) { @@ -142,7 +143,9 @@ static void snd_gf1_dma_interrupt(struct snd_gus_card * gus) snd_gf1_dma_program(gus, block->addr, block->buf_addr, block->count, (unsigned short) block->cmd); kfree(block); #if 0 - printk("program dma (IRQ) - addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n", addr, (long) buffer, count, cmd); + snd_printd(KERN_DEBUG "program dma (IRQ) - " + "addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n", + block->addr, block->buf_addr, block->count, block->cmd); #endif } @@ -203,13 +206,16 @@ int snd_gf1_dma_transfer_block(struct snd_gus_card * gus, } *block = *__block; block->next = NULL; -#if 0 - printk("addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n", block->addr, (long) block->buffer, block->count, block->cmd); -#endif -#if 0 - printk("gus->gf1.dma_data_pcm_last = 0x%lx\n", (long)gus->gf1.dma_data_pcm_last); - printk("gus->gf1.dma_data_pcm = 0x%lx\n", (long)gus->gf1.dma_data_pcm); -#endif + + snd_printdd("addr = 0x%x, buffer = 0x%lx, count = 0x%x, cmd = 0x%x\n", + block->addr, (long) block->buffer, block->count, + block->cmd); + + snd_printdd("gus->gf1.dma_data_pcm_last = 0x%lx\n", + (long)gus->gf1.dma_data_pcm_last); + snd_printdd("gus->gf1.dma_data_pcm = 0x%lx\n", + (long)gus->gf1.dma_data_pcm); + spin_lock_irqsave(&gus->dma_lock, flags); if (synth) { if (gus->gf1.dma_data_synth_last) { -- cgit v1.2.3 From c97dff84e0d9a4e0b7048e033d33511e3897c859 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 29 Jan 2009 11:48:14 +0100 Subject: ALSA: cmi8330: add MPU-401 support Add MPU-401 port support for the chip. Also, update some error messages and description. Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 1 + sound/isa/cmi8330.c | 42 ++++++++++++++++++++++++++++++++++++------ 2 files changed, 37 insertions(+), 6 deletions(-) diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index be2d377ff90a..5915dc41c0ee 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -95,6 +95,7 @@ config SND_CMI8330 select SND_WSS_LIB select SND_SB16_DSP select SND_OPL3_LIB + select SND_MPU401_UART help Say Y here to include support for soundcards based on the C-Media CMI8330 chip. diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 115437957413..9ca8122f7ba2 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -31,11 +31,11 @@ * To quickly load the module, * * modprobe -a snd-cmi8330 sbport=0x220 sbirq=5 sbdma8=1 - * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0 + * sbdma16=5 wssport=0x530 wssirq=11 wssdma=0 fmport=0x388 * * This card has two mixers and two PCM devices. I've cheesed it such * that recording and playback can be done through the same device. - * The driver "magically" routes the capturing to the AD1848 codec, + * The driver "magically" routes the capturing to the CMI8330 codec, * and playback to the SB16 codec. This allows for full-duplex mode * to some extent. * The utilities in alsa-utils are aware of both devices, so passing @@ -52,6 +52,7 @@ #include #include #include +#include #include #include @@ -81,6 +82,8 @@ static long wssport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; static int wssirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; static int wssdma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; static long fmport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long mpuport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard."); @@ -111,6 +114,10 @@ MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver."); module_param_array(fmport, long, NULL, 0444); MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver."); +module_param_array(mpuport, long, NULL, 0444); +MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver."); +module_param_array(mpuirq, int, NULL, 0444); +MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; static int pnp_registered; @@ -153,6 +160,7 @@ struct snd_cmi8330 { #ifdef CONFIG_PNP struct pnp_dev *cap; struct pnp_dev *play; + struct pnp_dev *mpu; #endif struct snd_card *card; struct snd_wss *wss; @@ -169,7 +177,7 @@ struct snd_cmi8330 { #ifdef CONFIG_PNP static struct pnp_card_device_id snd_cmi8330_pnpids[] = { - { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" } } }, + { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } }, { .id = "" } }; @@ -329,11 +337,15 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, if (acard->play == NULL) return -EBUSY; + acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL); + if (acard->play == NULL) + return -EBUSY; + pdev = acard->cap; err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n"); + snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n"); return -EBUSY; } wssport[dev] = pnp_port_start(pdev, 0); @@ -354,6 +366,17 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, sbdma16[dev] = pnp_dma(pdev, 1); sbirq[dev] = pnp_irq(pdev, 0); + /* allocate MPU-401 resources */ + pdev = acard->mpu; + + err = pnp_activate_dev(pdev); + if (err < 0) { + snd_printk(KERN_ERR + "CMI8330/C3D (MPU-401) PnP configure failure\n"); + return -EBUSY; + } + mpuport[dev] = pnp_port_start(pdev, 0); + mpuirq[dev] = pnp_irq(pdev, 0); return 0; } #endif @@ -502,11 +525,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) wssdma[dev], -1, WSS_HW_DETECT, 0, &acard->wss); if (err < 0) { - snd_printk(KERN_ERR PFX "(AD1848) device busy??\n"); + snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n"); return err; } if (acard->wss->hardware != WSS_HW_CMI8330) { - snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n"); + snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n"); return -ENODEV; } @@ -552,6 +575,13 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) } } + if (mpuport[dev] != SNDRV_AUTO_PORT) { + if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpuport[dev], 0, mpuirq[dev], + IRQF_DISABLED, NULL) < 0) + printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", + mpuport[dev]); + } strcpy(card->driver, "CMI8330/C3D"); strcpy(card->shortname, "C-Media CMI8330/C3D"); -- cgit v1.2.3 From 9e128fddcc589db4e7d9e8328f656ae4a21a2808 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 29 Jan 2009 11:49:10 +0100 Subject: ALSA: Add missing description of snd-cmi8330 module parameters Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 841a9365d5fd..7134a8f70442 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -346,6 +346,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. sbirq - IRQ # for CMI8330 chip (SB16) sbdma8 - 8bit DMA # for CMI8330 chip (SB16) sbdma16 - 16bit DMA # for CMI8330 chip (SB16) + fmport - (optional) OPL3 I/O port + mpuport - (optional) MPU401 I/O port + mpuirq - (optional) MPU401 irq # This module supports multiple cards and autoprobe. -- cgit v1.2.3 From 7393958f630ac91e591e62058f2bdb61523ec60c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 29 Jan 2009 14:57:50 +0200 Subject: ASoC: TWL4030: Add analog loopback support This patch adds the analog loopback/bypass support for twl4030 codec. Details for the implementation: It seams that the analog loopback needs the DAC powered on on the channel, where the loopback is selected. The switch for the DACs has been moved from the DAPM_DAC to the "Analog XX Playback Mixer". In this way the DAC will be powered while the audio playback is used or/and the loopback is enabled for the channel. The twl4030 codec powering has been reworked. Now the codec will be powered as long as it does not receives the SND_SOC_BIAS_OFF event. The exceptions are when the given change in the registers needs the codec power down/up cycle in order to take effect. Otherwise the codec is on. When the codec enters to STANDBY state and none of the loopback paths are enabled, than the amplifiers, which are no in the DAPM path are forced to turn off and the PLL is disabled. When playback/capture starts the disabled gains are restored and the PLL is enabled. When one of the loopback enabled in STANDBY mode, the disabled gains are restored and the PLL is enabled also. In short: the codec always goes to the lowest power state based on the bias_level and the bypass_state. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 212 ++++++++++++++++++++++++++++++++++++++++++--- sound/soc/codecs/twl4030.h | 15 ++++ 2 files changed, 214 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index f985bef40a39..c26854b398d3 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -117,6 +117,13 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { 0x00, /* REG_MISC_SET_2 (0x49) */ }; +/* codec private data */ +struct twl4030_priv { + unsigned int bypass_state; + unsigned int codec_powered; + unsigned int codec_muted; +}; + /* * read twl4030 register cache */ @@ -156,8 +163,12 @@ static int twl4030_write(struct snd_soc_codec *codec, static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable) { + struct twl4030_priv *twl4030 = codec->private_data; u8 mode; + if (enable == twl4030->codec_powered) + return; + mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE); if (enable) mode |= TWL4030_CODECPDZ; @@ -165,6 +176,7 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable) mode &= ~TWL4030_CODECPDZ; twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode); + twl4030->codec_powered = enable; /* REVISIT: this delay is present in TI sample drivers */ /* but there seems to be no TRM requirement for it */ @@ -184,11 +196,82 @@ static void twl4030_init_chip(struct snd_soc_codec *codec) } +static void twl4030_codec_mute(struct snd_soc_codec *codec, int mute) +{ + struct twl4030_priv *twl4030 = codec->private_data; + u8 reg_val; + + if (mute == twl4030->codec_muted) + return; + + if (mute) { + /* Bypass the reg_cache and mute the volumes + * Headset mute is done in it's own event handler + * Things to mute: Earpiece, PreDrivL/R, CarkitL/R + */ + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_EAR_CTL); + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + reg_val & (~TWL4030_EAR_GAIN), + TWL4030_REG_EAR_CTL); + + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PREDL_CTL); + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + reg_val & (~TWL4030_PREDL_GAIN), + TWL4030_REG_PREDL_CTL); + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PREDR_CTL); + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + reg_val & (~TWL4030_PREDR_GAIN), + TWL4030_REG_PREDL_CTL); + + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKL_CTL); + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + reg_val & (~TWL4030_PRECKL_GAIN), + TWL4030_REG_PRECKL_CTL); + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL); + twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, + reg_val & (~TWL4030_PRECKL_GAIN), + TWL4030_REG_PRECKR_CTL); + + /* Disable PLL */ + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL); + reg_val &= ~TWL4030_APLL_EN; + twl4030_write(codec, TWL4030_REG_APLL_CTL, reg_val); + } else { + /* Restore the volumes + * Headset mute is done in it's own event handler + * Things to restore: Earpiece, PreDrivL/R, CarkitL/R + */ + twl4030_write(codec, TWL4030_REG_EAR_CTL, + twl4030_read_reg_cache(codec, TWL4030_REG_EAR_CTL)); + + twl4030_write(codec, TWL4030_REG_PREDL_CTL, + twl4030_read_reg_cache(codec, TWL4030_REG_PREDL_CTL)); + twl4030_write(codec, TWL4030_REG_PREDR_CTL, + twl4030_read_reg_cache(codec, TWL4030_REG_PREDR_CTL)); + + twl4030_write(codec, TWL4030_REG_PRECKL_CTL, + twl4030_read_reg_cache(codec, TWL4030_REG_PRECKL_CTL)); + twl4030_write(codec, TWL4030_REG_PRECKR_CTL, + twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL)); + + /* Enable PLL */ + reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL); + reg_val |= TWL4030_APLL_EN; + twl4030_write(codec, TWL4030_REG_APLL_CTL, reg_val); + } + + twl4030->codec_muted = mute; +} + static void twl4030_power_up(struct snd_soc_codec *codec) { + struct twl4030_priv *twl4030 = codec->private_data; u8 anamicl, regmisc1, byte; int i = 0; + if (twl4030->codec_powered) + return; + /* set CODECPDZ to turn on codec */ twl4030_codec_enable(codec, 1); @@ -220,6 +303,9 @@ static void twl4030_power_up(struct snd_soc_codec *codec) twl4030_codec_enable(codec, 1); } +/* + * Unconditional power down + */ static void twl4030_power_down(struct snd_soc_codec *codec) { /* power down */ @@ -402,6 +488,22 @@ static const struct soc_enum twl4030_micpathtx2_enum = static const struct snd_kcontrol_new twl4030_dapm_micpathtx2_control = SOC_DAPM_ENUM("Route", twl4030_micpathtx2_enum); +/* Analog bypass for AudioR1 */ +static const struct snd_kcontrol_new twl4030_dapm_abypassr1_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXR1_APGA_CTL, 2, 1, 0); + +/* Analog bypass for AudioL1 */ +static const struct snd_kcontrol_new twl4030_dapm_abypassl1_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL1_APGA_CTL, 2, 1, 0); + +/* Analog bypass for AudioR2 */ +static const struct snd_kcontrol_new twl4030_dapm_abypassr2_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXR2_APGA_CTL, 2, 1, 0); + +/* Analog bypass for AudioL2 */ +static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control = + SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL2_APGA_CTL, 2, 1, 0); + static int micpath_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -497,6 +599,31 @@ static int headsetl_event(struct snd_soc_dapm_widget *w, return 0; } +static int bypass_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct soc_mixer_control *m = + (struct soc_mixer_control *)w->kcontrols->private_value; + struct twl4030_priv *twl4030 = w->codec->private_data; + unsigned char reg; + + reg = twl4030_read_reg_cache(w->codec, m->reg); + if (reg & (1 << m->shift)) + twl4030->bypass_state |= + (1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); + else + twl4030->bypass_state &= + ~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); + + if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) { + if (twl4030->bypass_state) + twl4030_codec_mute(w->codec, 0); + else + twl4030_codec_mute(w->codec, 1); + } + return 0; +} + /* * Some of the gain controls in TWL (mostly those which are associated with * the outputs) are implemented in an interesting way: @@ -775,13 +902,13 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { /* DACs */ SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback", - TWL4030_REG_AVDAC_CTL, 0, 0), + SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback", - TWL4030_REG_AVDAC_CTL, 1, 0), + SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback", - TWL4030_REG_AVDAC_CTL, 2, 0), + SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback", - TWL4030_REG_AVDAC_CTL, 3, 0), + SND_SOC_NOPM, 0, 0), /* Analog PGAs */ SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL, @@ -793,6 +920,29 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL, 0, 0, NULL, 0), + /* Analog bypasses */ + SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_abypassr1_control, bypass_event, + SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_SWITCH_E("Left1 Analog Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_abypassl1_control, + bypass_event, SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_SWITCH_E("Right2 Analog Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_abypassr2_control, + bypass_event, SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_SWITCH_E("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_abypassl2_control, + bypass_event, SND_SOC_DAPM_POST_REG), + + SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL, + 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", TWL4030_REG_AVDAC_CTL, + 1, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog R2 Playback Mixer", TWL4030_REG_AVDAC_CTL, + 2, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", TWL4030_REG_AVDAC_CTL, + 3, 0, NULL, 0), + /* Output MUX controls */ /* Earpiece */ SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0, @@ -863,13 +1013,19 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0), SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0), SND_SOC_DAPM_MICBIAS("Headset Mic Bias", TWL4030_REG_MICBIAS_CTL, 2, 0), + }; static const struct snd_soc_dapm_route intercon[] = { - {"ARXL1_APGA", NULL, "DAC Left1"}, - {"ARXR1_APGA", NULL, "DAC Right1"}, - {"ARXL2_APGA", NULL, "DAC Left2"}, - {"ARXR2_APGA", NULL, "DAC Right2"}, + {"Analog L1 Playback Mixer", NULL, "DAC Left1"}, + {"Analog R1 Playback Mixer", NULL, "DAC Right1"}, + {"Analog L2 Playback Mixer", NULL, "DAC Left2"}, + {"Analog R2 Playback Mixer", NULL, "DAC Right2"}, + + {"ARXL1_APGA", NULL, "Analog L1 Playback Mixer"}, + {"ARXR1_APGA", NULL, "Analog R1 Playback Mixer"}, + {"ARXL2_APGA", NULL, "Analog L2 Playback Mixer"}, + {"ARXR2_APGA", NULL, "Analog R2 Playback Mixer"}, /* Internal playback routings */ /* Earpiece */ @@ -951,6 +1107,17 @@ static const struct snd_soc_dapm_route intercon[] = { {"ADC Virtual Left2", NULL, "TX2 Capture Route"}, {"ADC Virtual Right2", NULL, "TX2 Capture Route"}, + /* Analog bypass routes */ + {"Right1 Analog Loopback", "Switch", "Analog Right Capture Route"}, + {"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"}, + {"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"}, + {"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"}, + + {"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"}, + {"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"}, + {"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"}, + {"Analog L2 Playback Mixer", NULL, "Left2 Analog Loopback"}, + }; static int twl4030_add_widgets(struct snd_soc_codec *codec) @@ -967,16 +1134,25 @@ static int twl4030_add_widgets(struct snd_soc_codec *codec) static int twl4030_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { + struct twl4030_priv *twl4030 = codec->private_data; + switch (level) { case SND_SOC_BIAS_ON: - twl4030_power_up(codec); + twl4030_codec_mute(codec, 0); break; case SND_SOC_BIAS_PREPARE: - /* TODO: develop a twl4030_prepare function */ + twl4030_power_up(codec); + if (twl4030->bypass_state) + twl4030_codec_mute(codec, 0); + else + twl4030_codec_mute(codec, 1); break; case SND_SOC_BIAS_STANDBY: - /* TODO: develop a twl4030_standby function */ - twl4030_power_down(codec); + twl4030_power_up(codec); + if (twl4030->bypass_state) + twl4030_codec_mute(codec, 0); + else + twl4030_codec_mute(codec, 1); break; case SND_SOC_BIAS_OFF: twl4030_power_down(codec); @@ -996,7 +1172,6 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, struct snd_soc_codec *codec = socdev->card->codec; u8 mode, old_mode, format, old_format; - /* bit rate */ old_mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) & ~TWL4030_CODECPDZ; @@ -1038,6 +1213,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream, if (mode != old_mode) { /* change rate and set CODECPDZ */ + twl4030_codec_enable(codec, 0); twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode); twl4030_codec_enable(codec, 1); } @@ -1258,11 +1434,19 @@ static int twl4030_probe(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec; + struct twl4030_priv *twl4030; codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); if (codec == NULL) return -ENOMEM; + twl4030 = kzalloc(sizeof(struct twl4030_priv), GFP_KERNEL); + if (twl4030 == NULL) { + kfree(codec); + return -ENOMEM; + } + + codec->private_data = twl4030; socdev->card->codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); @@ -1280,8 +1464,10 @@ static int twl4030_remove(struct platform_device *pdev) struct snd_soc_codec *codec = socdev->card->codec; printk(KERN_INFO "TWL4030 Audio Codec remove\n"); + twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); + kfree(codec->private_data); kfree(codec); return 0; diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h index 442e5a828617..33dbb144dad1 100644 --- a/sound/soc/codecs/twl4030.h +++ b/sound/soc/codecs/twl4030.h @@ -170,6 +170,9 @@ #define TWL4030_CLK256FS_EN 0x02 #define TWL4030_AIF_EN 0x01 +/* EAR_CTL (0x21) */ +#define TWL4030_EAR_GAIN 0x30 + /* HS_GAIN_SET (0x23) Fields */ #define TWL4030_HSR_GAIN 0x0C @@ -198,6 +201,18 @@ #define TWL4030_RAMP_DELAY_2581MS 0x1C #define TWL4030_RAMP_EN 0x02 +/* PREDL_CTL (0x25) */ +#define TWL4030_PREDL_GAIN 0x30 + +/* PREDR_CTL (0x26) */ +#define TWL4030_PREDR_GAIN 0x30 + +/* PRECKL_CTL (0x27) */ +#define TWL4030_PRECKL_GAIN 0x30 + +/* PRECKR_CTL (0x28) */ +#define TWL4030_PRECKR_GAIN 0x30 + /* HFL_CTL (0x29, 0x2A) Fields */ #define TWL4030_HF_CTL_HB_EN 0x04 #define TWL4030_HF_CTL_LOOP_EN 0x08 -- cgit v1.2.3 From b98b7b347eed333d6fa2f74770beb8106e576cc6 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 29 Jan 2009 13:18:31 -0200 Subject: ALSA: hda - make alc882_auto_init_input_src aware of selectors In the case of having a selector instead of mixer while initing input sources, the case that happens with ALC889, we must select instead of muting input. Problem was found while testing with hda-emu. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d81cb5eb8c5f..3666cc5dc3bc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6924,18 +6924,21 @@ static void alc882_auto_init_analog_input(struct hda_codec *codec) static void alc882_auto_init_input_src(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - const struct hda_input_mux *imux = spec->input_mux; int c; for (c = 0; c < spec->num_adc_nids; c++) { hda_nid_t conn_list[HDA_MAX_NUM_INPUTS]; hda_nid_t nid = spec->capsrc_nids[c]; + unsigned int mux_idx; + const struct hda_input_mux *imux; int conns, mute, idx, item; conns = snd_hda_get_connections(codec, nid, conn_list, ARRAY_SIZE(conn_list)); if (conns < 0) continue; + mux_idx = c >= spec->num_mux_defs ? 0 : c; + imux = &spec->input_mux[mux_idx]; for (idx = 0; idx < conns; idx++) { /* if the current connection is the selected one, * unmute it as default - otherwise mute it @@ -6948,8 +6951,20 @@ static void alc882_auto_init_input_src(struct hda_codec *codec) break; } } - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_AMP_GAIN_MUTE, mute); + /* check if we have a selector or mixer + * we could check for the widget type instead, but + * just check for Amp-In presence (in case of mixer + * without amp-in there is something wrong, this + * function shouldn't be used or capsrc nid is wrong) + */ + if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_AMP_GAIN_MUTE, + mute); + else if (mute != AMP_IN_MUTE(idx)) + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_CONNECT_SEL, + idx); } } } -- cgit v1.2.3 From bc05595845f58c065adc0763a678187647ec040f Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 11:28:33 +1100 Subject: selinux: remove unused bprm_check_security hook Remove unused bprm_check_security hook from SELinux. This currently calls into the capabilities hook, which is a noop. Acked-by: Eric Paris Acked-by: Serge Hallyn Signed-off-by: James Morris --- security/selinux/hooks.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 3bb4942e39cc..8251c6ba36c9 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2182,11 +2182,6 @@ static int selinux_bprm_set_creds(struct linux_binprm *bprm) return 0; } -static int selinux_bprm_check_security(struct linux_binprm *bprm) -{ - return secondary_ops->bprm_check_security(bprm); -} - static int selinux_bprm_secureexec(struct linux_binprm *bprm) { const struct cred *cred = current_cred(); @@ -5608,7 +5603,6 @@ static struct security_operations selinux_ops = { .netlink_recv = selinux_netlink_recv, .bprm_set_creds = selinux_bprm_set_creds, - .bprm_check_security = selinux_bprm_check_security, .bprm_committing_creds = selinux_bprm_committing_creds, .bprm_committed_creds = selinux_bprm_committed_creds, .bprm_secureexec = selinux_bprm_secureexec, -- cgit v1.2.3 From 2ec5dbe23d68bddc043a85d1226bfc499a724b1c Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 11:46:14 +1100 Subject: selinux: remove secondary ops call to bprm_committing_creds Remove secondary ops call to bprm_committing_creds, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 8251c6ba36c9..fc01ffa0b69c 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2311,8 +2311,6 @@ static void selinux_bprm_committing_creds(struct linux_binprm *bprm) struct rlimit *rlim, *initrlim; int rc, i; - secondary_ops->bprm_committing_creds(bprm); - new_tsec = bprm->cred->security; if (new_tsec->sid == new_tsec->osid) return; -- cgit v1.2.3 From 5565b0b865f672e3d7e31936ad1d40710ab7bfc4 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 11:47:49 +1100 Subject: selinux: remove secondary ops call to bprm_committed_creds Remove secondary ops call to bprm_committed_creds, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index fc01ffa0b69c..516058ff0632 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2356,8 +2356,6 @@ static void selinux_bprm_committed_creds(struct linux_binprm *bprm) int rc, i; unsigned long flags; - secondary_ops->bprm_committed_creds(bprm); - osid = tsec->osid; sid = tsec->sid; -- cgit v1.2.3 From ef935b9136eeaa203f75bf0b4d6e398c29f44d27 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 11:51:11 +1100 Subject: selinux: remove secondary ops call to sb_mount Remove secondary ops call to sb_mount, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 516058ff0632..bdd483096b39 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2531,11 +2531,6 @@ static int selinux_mount(char *dev_name, void *data) { const struct cred *cred = current_cred(); - int rc; - - rc = secondary_ops->sb_mount(dev_name, path, type, flags, data); - if (rc) - return rc; if (flags & MS_REMOUNT) return superblock_has_perm(cred, path->mnt->mnt_sb, -- cgit v1.2.3 From 97422ab9ef45118cb7418d799dc69040f17108ce Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 11:55:02 +1100 Subject: selinux: remove secondary ops call to sb_umount Remove secondary ops call to sb_umount, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index bdd483096b39..42aa8de5f590 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2543,11 +2543,6 @@ static int selinux_mount(char *dev_name, static int selinux_umount(struct vfsmount *mnt, int flags) { const struct cred *cred = current_cred(); - int rc; - - rc = secondary_ops->sb_umount(mnt, flags); - if (rc) - return rc; return superblock_has_perm(cred, mnt->mnt_sb, FILESYSTEM__UNMOUNT, NULL); -- cgit v1.2.3 From efdfac437607e4acfed66c383091a376525eaec4 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 11:57:34 +1100 Subject: selinux: remove secondary ops call to inode_link Remove secondary ops call to inode_link, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 42aa8de5f590..da0e523157d0 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2630,11 +2630,6 @@ static int selinux_inode_create(struct inode *dir, struct dentry *dentry, int ma static int selinux_inode_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry) { - int rc; - - rc = secondary_ops->inode_link(old_dentry, dir, new_dentry); - if (rc) - return rc; return may_link(dir, old_dentry, MAY_LINK); } -- cgit v1.2.3 From e4737250b751b4e0e802adae9a4d3ae0227b580b Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:00:08 +1100 Subject: selinux: remove secondary ops call to inode_unlink Remove secondary ops call to inode_unlink, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index da0e523157d0..ec834dc0b414 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2635,11 +2635,6 @@ static int selinux_inode_link(struct dentry *old_dentry, struct inode *dir, stru static int selinux_inode_unlink(struct inode *dir, struct dentry *dentry) { - int rc; - - rc = secondary_ops->inode_unlink(dir, dentry); - if (rc) - return rc; return may_link(dir, dentry, MAY_UNLINK); } -- cgit v1.2.3 From dd4907a6d4e038dc65839fcd4030ebefe2f5f439 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:08:34 +1100 Subject: selinux: remove secondary ops call to inode_mknod Remove secondary ops call to inode_mknod, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index ec834dc0b414..03621928f1b2 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2655,12 +2655,6 @@ static int selinux_inode_rmdir(struct inode *dir, struct dentry *dentry) static int selinux_inode_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) { - int rc; - - rc = secondary_ops->inode_mknod(dir, dentry, mode, dev); - if (rc) - return rc; - return may_create(dir, dentry, inode_mode_to_security_class(mode)); } -- cgit v1.2.3 From f51115b9ab5b9cfd0b7be1cce75afbf3ffbcdd87 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:10:56 +1100 Subject: selinux: remove secondary ops call to inode_follow_link Remove secondary ops call to inode_follow_link, which is a noop in capabilities. Acked-by: Serge Hallyn Signed-off-by: James Morris --- security/selinux/hooks.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 03621928f1b2..67291a385c75 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2674,11 +2674,7 @@ static int selinux_inode_readlink(struct dentry *dentry) static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *nameidata) { const struct cred *cred = current_cred(); - int rc; - rc = secondary_ops->inode_follow_link(dentry, nameidata); - if (rc) - return rc; return dentry_has_perm(cred, NULL, dentry, FILE__READ); } -- cgit v1.2.3 From 188fbcca9dd02f15dcf45cfc51ce0dd6c13993f6 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:14:03 +1100 Subject: selinux: remove secondary ops call to inode_permission Remove secondary ops call to inode_permission, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 67291a385c75..7e90c9e58657 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2681,11 +2681,6 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *na static int selinux_inode_permission(struct inode *inode, int mask) { const struct cred *cred = current_cred(); - int rc; - - rc = secondary_ops->inode_permission(inode, mask); - if (rc) - return rc; if (!mask) { /* No permission to check. Existence test. */ -- cgit v1.2.3 From 438add6b32d9295db6e3ecd4d9e137086ec5b5d9 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:15:59 +1100 Subject: selinux: remove secondary ops call to inode_setattr Remove secondary ops call to inode_setattr, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 7e90c9e58657..08b506846a1f 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2694,11 +2694,6 @@ static int selinux_inode_permission(struct inode *inode, int mask) static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr) { const struct cred *cred = current_cred(); - int rc; - - rc = secondary_ops->inode_setattr(dentry, iattr); - if (rc) - return rc; if (iattr->ia_valid & ATTR_FORCE) return 0; -- cgit v1.2.3 From d541bbee6902d5ffb8a03d63ac8f4b1364c2ff93 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:19:51 +1100 Subject: selinux: remove secondary ops call to file_mprotect Remove secondary ops call to file_mprotect, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 08b506846a1f..2c98071fba8b 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3056,18 +3056,13 @@ static int selinux_file_mprotect(struct vm_area_struct *vma, unsigned long prot) { const struct cred *cred = current_cred(); - int rc; - - rc = secondary_ops->file_mprotect(vma, reqprot, prot); - if (rc) - return rc; if (selinux_checkreqprot) prot = reqprot; #ifndef CONFIG_PPC32 if ((prot & PROT_EXEC) && !(vma->vm_flags & VM_EXEC)) { - rc = 0; + int rc = 0; if (vma->vm_start >= vma->vm_mm->start_brk && vma->vm_end <= vma->vm_mm->brk) { rc = cred_has_perm(cred, cred, PROCESS__EXECHEAP); -- cgit v1.2.3 From af294e41d0c95a291cc821a1b43ec2cd13976a8b Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:23:36 +1100 Subject: selinux: remove secondary ops call to task_create Remove secondary ops call to task_create, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 2c98071fba8b..72c1e5cd26d4 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3212,12 +3212,6 @@ static int selinux_dentry_open(struct file *file, const struct cred *cred) static int selinux_task_create(unsigned long clone_flags) { - int rc; - - rc = secondary_ops->task_create(clone_flags); - if (rc) - return rc; - return current_has_perm(current, PROCESS__FORK); } -- cgit v1.2.3 From ca5143d3ff3c7a4e1c2c8bdcf0f53aea227a7722 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:26:14 +1100 Subject: selinux: remove unused cred_commit hook Remove unused cred_commit hook from SELinux. This currently calls into the capabilities hook, which is a noop. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 72c1e5cd26d4..afccada1f262 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3244,14 +3244,6 @@ static int selinux_cred_prepare(struct cred *new, const struct cred *old, return 0; } -/* - * commit new credentials - */ -static void selinux_cred_commit(struct cred *new, const struct cred *old) -{ - secondary_ops->cred_commit(new, old); -} - /* * set the security data for a kernel service * - all the creation contexts are set to unlabelled @@ -5610,7 +5602,6 @@ static struct security_operations selinux_ops = { .task_create = selinux_task_create, .cred_free = selinux_cred_free, .cred_prepare = selinux_cred_prepare, - .cred_commit = selinux_cred_commit, .kernel_act_as = selinux_kernel_act_as, .kernel_create_files_as = selinux_kernel_create_files_as, .task_setuid = selinux_task_setuid, -- cgit v1.2.3 From ef76e748faa823a738d632ee4c8ed9adaabc8a40 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:30:28 +1100 Subject: selinux: remove secondary ops call to task_setrlimit Remove secondary ops call to task_setrlimit, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index afccada1f262..3aaa63cc5c74 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3367,11 +3367,6 @@ static int selinux_task_getioprio(struct task_struct *p) static int selinux_task_setrlimit(unsigned int resource, struct rlimit *new_rlim) { struct rlimit *old_rlim = current->signal->rlim + resource; - int rc; - - rc = secondary_ops->task_setrlimit(resource, new_rlim); - if (rc) - return rc; /* Control the ability to change the hard limit (whether lowering or raising it), so that the hard limit can -- cgit v1.2.3 From 2cbbd19812b7636c1c37bcf50c403e7af5278d73 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:32:50 +1100 Subject: selinux: remove secondary ops call to task_kill Remove secondary ops call to task_kill, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 3aaa63cc5c74..0bd36a17587c 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3405,10 +3405,6 @@ static int selinux_task_kill(struct task_struct *p, struct siginfo *info, u32 perm; int rc; - rc = secondary_ops->task_kill(p, info, sig, secid); - if (rc) - return rc; - if (!sig) perm = PROCESS__SIGNULL; /* null signal; existence test */ else -- cgit v1.2.3 From 5c4054ccfafb6a446e9b65c524af1741656c6c60 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:34:53 +1100 Subject: selinux: remove secondary ops call to unix_stream_connect Remove secondary ops call to unix_stream_connect, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 0bd36a17587c..25198e9896fa 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3997,10 +3997,6 @@ static int selinux_socket_unix_stream_connect(struct socket *sock, struct avc_audit_data ad; int err; - err = secondary_ops->unix_stream_connect(sock, other, newsk); - if (err) - return err; - isec = SOCK_INODE(sock)->i_security; other_isec = SOCK_INODE(other)->i_security; -- cgit v1.2.3 From 95c14904b6f6f8a35365f0c58d530c85b4fb96b4 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 29 Jan 2009 12:37:58 +1100 Subject: selinux: remove secondary ops call to shm_shmat Remove secondary ops call to shm_shmat, which is a noop in capabilities. Acked-by: Serge Hallyn Acked-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 25198e9896fa..d9604794a4d2 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -5113,11 +5113,6 @@ static int selinux_shm_shmat(struct shmid_kernel *shp, char __user *shmaddr, int shmflg) { u32 perms; - int rc; - - rc = secondary_ops->shm_shmat(shp, shmaddr, shmflg); - if (rc) - return rc; if (shmflg & SHM_RDONLY) perms = SHM__READ; -- cgit v1.2.3 From 04eb093c7c81d118efeb96228f69bc0179f71897 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 29 Jan 2009 14:28:37 -0600 Subject: ASoC: fix initialization order of the CS4270 codec driver ASoC codec drivers typically serve two masters: the I2C bus and ASoC itself. When a codec driver registers with ASoC, a probe function is called. Most codec drivers call ASoC first, and then register with the I2C bus in the ASoC probe function. However, in order to support multiple codecs on one board, it's easier if the codec driver is probed via the I2C bus first. This is because the call to i2c_add_driver() can result in the I2C probe function being called multiple times - once for each codec. In the current design, the driver registers once with ASoC, and in the ASoC probe function, it calls i2c_add_driver(). The results in the I2C probe function being called multiple times before the driver can register with ASoC again. The new design has the driver call i2c_add_driver() first. In the I2C probe function, the driver registers with ASoC. This allows the ASoC probe function to be called once per I2C device. Also add code to check if the I2C probe function is called more than once, since that is not supported with the current ASoC design. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 177 +++++++++++++++++++++++++--------------------- 1 file changed, 97 insertions(+), 80 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 21253b48289f..adc1150ddb00 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -490,21 +490,17 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { }; /* - * Global variable to store socdev for i2c probe function. + * Global variable to store codec for the ASoC probe function. * * If struct i2c_driver had a private_data field, we wouldn't need to use - * cs4270_socdec. This is the only way to pass the socdev structure to - * cs4270_i2c_probe(). - * - * The real solution to cs4270_socdev is to create a mechanism - * that maps I2C addresses to snd_soc_device structures. Perhaps the - * creation of the snd_soc_device object should be moved out of - * cs4270_probe() and into cs4270_i2c_probe(), but that would make this - * driver dependent on I2C. The CS4270 supports "stand-alone" mode, whereby - * the chip is *not* connected to the I2C bus, but is instead configured via - * input pins. + * cs4270_codec. This is the only way to pass the codec structure from + * cs4270_i2c_probe() to cs4270_probe(). Unfortunately, there is no good + * way to synchronize these two functions. cs4270_i2c_probe() can be called + * multiple times before cs4270_probe() is called even once. So for now, we + * also only allow cs4270_i2c_probe() to be run once. That means that we do + * not support more than one cs4270 device in the system, at least for now. */ -static struct snd_soc_device *cs4270_socdev; +static struct snd_soc_codec *cs4270_codec; struct snd_soc_dai cs4270_dai = { .name = "cs4270", @@ -531,6 +527,70 @@ struct snd_soc_dai cs4270_dai = { }; EXPORT_SYMBOL_GPL(cs4270_dai); +/* + * ASoC probe function + */ +static int cs4270_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = cs4270_codec; + unsigned int i; + int ret; + + /* Connect the codec to the socdev. snd_soc_new_pcms() needs this. */ + socdev->card->codec = codec; + + /* Register PCMs */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "cs4270: failed to create PCMs\n"); + return ret; + } + + /* Add the non-DAPM controls */ + for (i = 0; i < ARRAY_SIZE(cs4270_snd_controls); i++) { + struct snd_kcontrol *kctrl; + + kctrl = snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL); + if (!kctrl) { + printk(KERN_ERR "cs4270: error creating control '%s'\n", + cs4270_snd_controls[i].name); + ret = -ENOMEM; + goto error_free_pcms; + } + + ret = snd_ctl_add(codec->card, kctrl); + if (ret < 0) { + printk(KERN_ERR "cs4270: error adding control '%s'\n", + cs4270_snd_controls[i].name); + goto error_free_pcms; + } + } + + /* And finally, register the socdev */ + ret = snd_soc_init_card(socdev); + if (ret < 0) { + printk(KERN_ERR "cs4270: failed to register card\n"); + goto error_free_pcms; + } + + return 0; + +error_free_pcms: + snd_soc_free_pcms(socdev); + + return ret; +} + +static int cs4270_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + + return 0; +}; + /* * Initialize the I2C interface of the CS4270 * @@ -543,17 +603,27 @@ EXPORT_SYMBOL_GPL(cs4270_dai); static int cs4270_i2c_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) { - struct snd_soc_device *socdev = cs4270_socdev; struct snd_soc_codec *codec; struct cs4270_private *cs4270; - int i; - int ret = 0; + int ret; + + /* For now, we only support one cs4270 device in the system. See the + * comment for cs4270_codec. + */ + if (cs4270_codec) { + printk(KERN_ERR "cs4270: ignoring CS4270 at addr %X\n", + i2c_client->addr); + printk(KERN_ERR "cs4270: only one CS4270 per board allowed\n"); + /* Should we return something other than ENODEV here? */ + return -ENODEV; + } /* Verify that we have a CS4270 */ ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to read I2C\n"); + printk(KERN_ERR "cs4270: failed to read I2C at addr %X\n", + i2c_client->addr); return ret; } /* The top four bits of the chip ID should be 1100. */ @@ -575,7 +645,7 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, return -ENOMEM; } codec = &cs4270->codec; - socdev->card->codec = codec; + cs4270_codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); @@ -600,50 +670,20 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, goto error_free_codec; } - /* Register PCMs */ - - ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + /* Register the DAI. If all the other ASoC driver have already + * registered, then this will call our probe function, so + * cs4270_codec needs to be ready. + */ + ret = snd_soc_register_dai(&cs4270_dai); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to create PCMs\n"); + printk(KERN_ERR "cs4270: failed to register DAIe\n"); goto error_free_codec; } - /* Add the non-DAPM controls */ - - for (i = 0; i < ARRAY_SIZE(cs4270_snd_controls); i++) { - struct snd_kcontrol *kctrl; - - kctrl = snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL); - if (!kctrl) { - printk(KERN_ERR "cs4270: error creating control '%s'\n", - cs4270_snd_controls[i].name); - ret = -ENOMEM; - goto error_free_pcms; - } - - ret = snd_ctl_add(codec->card, kctrl); - if (ret < 0) { - printk(KERN_ERR "cs4270: error adding control '%s'\n", - cs4270_snd_controls[i].name); - goto error_free_pcms; - } - } - - /* Initialize the SOC device */ - - ret = snd_soc_init_card(socdev); - if (ret < 0) { - printk(KERN_ERR "cs4270: failed to register card\n"); - goto error_free_pcms;; - } - - i2c_set_clientdata(i2c_client, socdev); + i2c_set_clientdata(i2c_client, cs4270); return 0; -error_free_pcms: - snd_soc_free_pcms(socdev); - error_free_codec: kfree(cs4270); @@ -652,11 +692,8 @@ error_free_codec: static int cs4270_i2c_remove(struct i2c_client *i2c_client) { - struct snd_soc_device *socdev = i2c_get_clientdata(i2c_client); - struct snd_soc_codec *codec = socdev->card->codec; - struct cs4270_private *cs4270 = codec->private_data; + struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client); - snd_soc_free_pcms(socdev); kfree(cs4270); return 0; @@ -678,26 +715,6 @@ static struct i2c_driver cs4270_i2c_driver = { .remove = cs4270_i2c_remove, }; -/* - * ASoC probe function - * - * This function is called when the machine driver calls - * platform_device_add(). - */ -static int cs4270_probe(struct platform_device *pdev) -{ - cs4270_socdev = platform_get_drvdata(pdev);; - - return i2c_add_driver(&cs4270_i2c_driver); -} - -static int cs4270_remove(struct platform_device *pdev) -{ - i2c_del_driver(&cs4270_i2c_driver); - - return 0; -} - /* * ASoC codec device structure * @@ -714,13 +731,13 @@ static int __init cs4270_init(void) { printk(KERN_INFO "Cirrus Logic CS4270 ALSA SoC Codec Driver\n"); - return snd_soc_register_dai(&cs4270_dai); + return i2c_add_driver(&cs4270_i2c_driver); } module_init(cs4270_init); static void __exit cs4270_exit(void) { - snd_soc_unregister_dai(&cs4270_dai); + i2c_del_driver(&cs4270_i2c_driver); } module_exit(cs4270_exit); -- cgit v1.2.3 From 880abd42d0891635e988b0a2cfb0942cf79fa2c3 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 30 Jan 2009 19:20:29 +0100 Subject: ALSA: ess1688: fix OPL3 port setting The ess1688 driver uses the same port for PCM audio (SB compatible) and OPL3 synthesis. It is not always right so allow to choose a different port for OPL3 synthesis. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/es1688/es1688.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index b46377139cf8..b0eb0cf6050e 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -49,6 +49,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */ static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x240,0x260 */ +static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* Usually 0x388 */ static long mpu_port[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -1}; static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,10 */ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,10 */ @@ -65,6 +66,8 @@ MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); module_param_array(mpu_port, long, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); module_param_array(irq, int, NULL, 0444); +module_param_array(fm_port, long, NULL, 0444); +MODULE_PARM_DESC(fm_port, "FM port # for ES1688 driver."); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); module_param_array(mpu_irq, int, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); @@ -143,13 +146,19 @@ static int __devinit snd_es1688_probe(struct device *dev, unsigned int n) sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", pcm->name, chip->port, chip->irq, chip->dma8); - if (snd_opl3_create(card, chip->port, chip->port + 2, - OPL3_HW_OPL3, 0, &opl3) < 0) - dev_warn(dev, "opl3 not detected at 0x%lx\n", chip->port); - else { - error = snd_opl3_hwdep_new(opl3, 0, 1, NULL); - if (error < 0) - goto out; + if (fm_port[n] == SNDRV_AUTO_PORT) + fm_port[n] = port[n]; /* share the same port */ + + if (fm_port[n] > 0) { + if (snd_opl3_create(card, fm_port[n], fm_port[n] + 2, + OPL3_HW_OPL3, 0, &opl3) < 0) + dev_warn(dev, + "opl3 not detected at 0x%lx\n", fm_port[n]); + else { + error = snd_opl3_hwdep_new(opl3, 0, 1, NULL); + if (error < 0) + goto out; + } } if (mpu_irq[n] >= 0 && mpu_irq[n] != SNDRV_AUTO_IRQ && -- cgit v1.2.3 From 504a06d8b05cb5b214c9b97752d8451e88d9ef81 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 Jan 2009 19:59:10 +0100 Subject: ALSA: Add description of new fm_port option for snd-es1688 driver Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 7134a8f70442..a763b76afe51 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -609,6 +609,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for ESS AudioDrive ES-1688 and ES-688 sound cards. port - port # for ES-1688 chip (0x220,0x240,0x260) + fm_port - port # for OPL3 (option; share the same port as default) mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default) irq - IRQ # for ES-1688 chip (5,7,9,10) mpu_irq - IRQ # for MPU-401 port (5,7,9,10) -- cgit v1.2.3 From ff7bf02f630ae93cad4feda0f6a5a19b25a5019a Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 30 Jan 2009 11:14:49 -0600 Subject: ASoC: fix documentation in CS4270 codec driver Spruce up the documentation in the CS4270 codec. Use kerneldoc where appropriate. Fix incorrect comments. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 163 +++++++++++++++++++++++++++++----------------- 1 file changed, 105 insertions(+), 58 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index adc1150ddb00..e5f5afdd3427 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -3,10 +3,10 @@ * * Author: Timur Tabi * - * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * Copyright 2007-2009 Freescale Semiconductor, Inc. This file is licensed + * under the terms of the GNU General Public License version 2. This + * program is licensed "as is" without any warranty of any kind, whether + * express or implied. * * This is an ASoC device driver for the Cirrus Logic CS4270 codec. * @@ -111,8 +111,13 @@ struct cs4270_private { unsigned int mode; /* The mode (I2S or left-justified) */ }; -/* - * Clock Ratio Selection for Master Mode with I2C enabled +/** + * struct cs4270_mode_ratios - clock ratio tables + * @ratio: the ratio of MCLK to the sample rate + * @speed_mode: the Speed Mode bits to set in the Mode Control register for + * this ratio + * @mclk: the Ratio Select bits to set in the Mode Control register for this + * ratio * * The data for this chart is taken from Table 5 of the CS4270 reference * manual. @@ -121,31 +126,30 @@ struct cs4270_private { * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling * rates the CS4270 currently supports. * - * Each element in this array corresponds to the ratios in mclk_ratios[]. - * These two arrays need to be in sync. - * - * 'speed_mode' is the corresponding bit pattern to be written to the + * @speed_mode is the corresponding bit pattern to be written to the * MODE bits of the Mode Control Register * - * 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of + * @mclk is the corresponding bit pattern to be wirten to the MCLK bits of * the Mode Control Register. * * In situations where a single ratio is represented by multiple speed * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick * double-speed instead of quad-speed. However, the CS4270 errata states - * that Divide-By-1.5 can cause failures, so we avoid that mode where + * that divide-By-1.5 can cause failures, so we avoid that mode where * possible. * - * ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not - * work if VD = 3.3V. If this effects you, select the + * Errata: There is an errata for the CS4270 where divide-by-1.5 does not + * work if Vd is 3.3V. If this effects you, select the * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will * never select any sample rates that require divide-by-1.5. */ -static struct { +struct cs4270_mode_ratios { unsigned int ratio; u8 speed_mode; u8 mclk; -} cs4270_mode_ratios[] = { +}; + +static struct cs4270_mode_ratios[] = { {64, CS4270_MODE_4X, CS4270_MODE_DIV1}, #ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA {96, CS4270_MODE_4X, CS4270_MODE_DIV15}, @@ -162,34 +166,27 @@ static struct { /* The number of MCLK/LRCK ratios supported by the CS4270 */ #define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios) -/* - * Determine the CS4270 samples rates. +/** + * cs4270_set_dai_sysclk - determine the CS4270 samples rates. + * @codec_dai: the codec DAI + * @clk_id: the clock ID (ignored) + * @freq: the MCLK input frequency + * @dir: the clock direction (ignored) * - * 'freq' is the input frequency to MCLK. The other parameters are ignored. + * This function is used to tell the codec driver what the input MCLK + * frequency is. * * The value of MCLK is used to determine which sample rates are supported * by the CS4270. The ratio of MCLK / Fs must be equal to one of nine - * support values: 64, 96, 128, 192, 256, 384, 512, 768, and 1024. + * supported values - 64, 96, 128, 192, 256, 384, 512, 768, and 1024. * * This function calculates the nine ratios and determines which ones match * a standard sample rate. If there's a match, then it is added to the list - * of support sample rates. + * of supported sample rates. * * This function must be called by the machine driver's 'startup' function, * otherwise the list of supported sample rates will not be available in * time for ALSA. - * - * Note that in stand-alone mode, the sample rate is determined by input - * pins M0, M1, MDIV1, and MDIV2. Also in stand-alone mode, divide-by-3 - * is not a programmable option. However, divide-by-3 is not an available - * option in stand-alone mode. This cases two problems: a ratio of 768 is - * not available (it requires divide-by-3) and B) ratios 192 and 384 can - * only be selected with divide-by-1.5, but there is an errate that make - * this selection difficult. - * - * In addition, there is no mechanism for communicating with the machine - * driver what the input settings can be. This would need to be implemented - * for stand-alone mode to work. */ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) @@ -230,8 +227,10 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, return 0; } -/* - * Configure the codec for the selected audio format +/** + * cs4270_set_dai_fmt - configure the codec for the selected audio format + * @codec_dai: the codec DAI + * @format: a SND_SOC_DAIFMT_x value indicating the data format * * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the * codec accordingly. @@ -261,8 +260,16 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, return ret; } -/* - * Pre-fill the CS4270 register cache. +/** + * cs4270_fill_cache - pre-fill the CS4270 register cache. + * @codec: the codec for this CS4270 + * + * This function fills in the CS4270 register cache by reading the register + * values from the hardware. + * + * This CS4270 registers are cached to avoid excessive I2C I/O operations. + * After the initial read to pre-fill the cache, the CS4270 never updates + * the register values, so we won't have a cache coherency problem. * * We use the auto-increment feature of the CS4270 to read all registers in * one shot. @@ -285,12 +292,17 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec) return 0; } -/* - * Read from the CS4270 register cache. +/** + * cs4270_read_reg_cache - read from the CS4270 register cache. + * @codec: the codec for this CS4270 + * @reg: the register to read + * + * This function returns the value for a given register. It reads only from + * the register cache, not the hardware itself. * * This CS4270 registers are cached to avoid excessive I2C I/O operations. * After the initial read to pre-fill the cache, the CS4270 never updates - * the register values, so we won't have a cache coherncy problem. + * the register values, so we won't have a cache coherency problem. */ static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec, unsigned int reg) @@ -303,8 +315,11 @@ static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec, return cache[reg - CS4270_FIRSTREG]; } -/* - * Write to a CS4270 register via the I2C bus. +/** + * cs4270_i2c_write - write to a CS4270 register via the I2C bus. + * @codec: the codec for this CS4270 + * @reg: the register to write + * @value: the value to write to the register * * This function writes the given value to the given CS4270 register, and * also updates the register cache. @@ -336,11 +351,17 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } -/* - * Program the CS4270 with the given hardware parameters. +/** + * cs4270_hw_params - program the CS4270 with the given hardware parameters. + * @substream: the audio stream + * @params: the hardware parameters to set + * @dai: the SOC DAI (ignored) * - * The .ops functions are used to provide board-specific data, like - * input frequencies, to this driver. This function takes that information, + * This function programs the hardware with the values provided. + * Specifically, the sample rate and the data format. + * + * The .ops functions are used to provide board-specific data, like input + * frequencies, to this driver. This function takes that information, * combines it with the hardware parameters provided, and programs the * hardware accordingly. */ @@ -455,8 +476,10 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, } #ifdef CONFIG_SND_SOC_CS4270_HWMUTE -/* - * Set the CS4270 external mute +/** + * cs4270_mute - enable/disable the CS4270 external mute + * @dai: the SOC DAI + * @mute: 0 = disable mute, 1 = enable mute * * This function toggles the mute bits in the MUTE register. The CS4270's * mute capability is intended for external muting circuitry, so if the @@ -490,7 +513,7 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { }; /* - * Global variable to store codec for the ASoC probe function. + * cs4270_codec - global variable to store codec for the ASoC probe function * * If struct i2c_driver had a private_data field, we wouldn't need to use * cs4270_codec. This is the only way to pass the codec structure from @@ -527,8 +550,12 @@ struct snd_soc_dai cs4270_dai = { }; EXPORT_SYMBOL_GPL(cs4270_dai); -/* - * ASoC probe function +/** + * cs4270_probe - ASoC probe function + * @pdev: platform device + * + * This function is called when ASoC has all the pieces it needs to + * instantiate a sound driver. */ static int cs4270_probe(struct platform_device *pdev) { @@ -582,6 +609,12 @@ error_free_pcms: return ret; } +/** + * cs4270_remove - ASoC remove function + * @pdev: platform device + * + * This function is the counterpart to cs4270_probe(). + */ static int cs4270_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); @@ -591,14 +624,13 @@ static int cs4270_remove(struct platform_device *pdev) return 0; }; -/* - * Initialize the I2C interface of the CS4270 - * - * This function is called for whenever the I2C subsystem finds a device - * at a particular address. +/** + * cs4270_i2c_probe - initialize the I2C interface of the CS4270 + * @i2c_client: the I2C client object + * @id: the I2C device ID (ignored) * - * Note: snd_soc_new_pcms() must be called before this function can be called, - * because of snd_ctl_add(). + * This function is called whenever the I2C subsystem finds a device that + * matches the device ID given via a prior call to i2c_add_driver(). */ static int cs4270_i2c_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) @@ -690,6 +722,12 @@ error_free_codec: return ret; } +/** + * cs4270_i2c_remove - remove an I2C device + * @i2c_client: the I2C client object + * + * This function is the counterpart to cs4270_i2c_probe(). + */ static int cs4270_i2c_remove(struct i2c_client *i2c_client) { struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client); @@ -699,12 +737,21 @@ static int cs4270_i2c_remove(struct i2c_client *i2c_client) return 0; } +/* + * cs4270_id - I2C device IDs supported by this driver + */ static struct i2c_device_id cs4270_id[] = { {"cs4270", 0}, {} }; MODULE_DEVICE_TABLE(i2c, cs4270_id); +/* + * cs4270_i2c_driver - I2C device identification + * + * This structure tells the I2C subsystem how to identify and support a + * given I2C device type. + */ static struct i2c_driver cs4270_i2c_driver = { .driver = { .name = "cs4270", -- cgit v1.2.3 From 8f008062943c8565e855dda8a6681f641d7e71f9 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 31 Jan 2009 16:29:24 +0200 Subject: ASoC: Update OMAP3 pandora board file Update pandora board file for recent TWL4030 codec changes. Also move output related snd_soc_dapm_nc_pin() calls to omap3pandora_out_init(), where they belong. Signed-off-by: Grazvydas Ignotas Signed-off-by: Mark Brown --- sound/soc/omap/omap3pandora.c | 49 +++++++++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 20 deletions(-) diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index fcc2f5d9a878..fe282d4ef422 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -143,7 +143,7 @@ static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = { }; static const struct snd_soc_dapm_widget omap3pandora_in_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Mic (Internal)", NULL), + SND_SOC_DAPM_MIC("Mic (internal)", NULL), SND_SOC_DAPM_MIC("Mic (external)", NULL), SND_SOC_DAPM_LINE("Line In", NULL), }; @@ -155,16 +155,33 @@ static const struct snd_soc_dapm_route omap3pandora_out_map[] = { }; static const struct snd_soc_dapm_route omap3pandora_in_map[] = { - {"INL", NULL, "Line In"}, - {"INR", NULL, "Line In"}, - {"INL", NULL, "Mic (Internal)"}, - {"INR", NULL, "Mic (external)"}, + {"AUXL", NULL, "Line In"}, + {"AUXR", NULL, "Line In"}, + + {"MAINMIC", NULL, "Mic Bias 1"}, + {"Mic Bias 1", NULL, "Mic (internal)"}, + + {"SUBMIC", NULL, "Mic Bias 2"}, + {"Mic Bias 2", NULL, "Mic (external)"}, }; static int omap3pandora_out_init(struct snd_soc_codec *codec) { int ret; + /* All TWL4030 output pins are floating */ + snd_soc_dapm_nc_pin(codec, "OUTL"); + snd_soc_dapm_nc_pin(codec, "OUTR"); + snd_soc_dapm_nc_pin(codec, "EARPIECE"); + snd_soc_dapm_nc_pin(codec, "PREDRIVEL"); + snd_soc_dapm_nc_pin(codec, "PREDRIVER"); + snd_soc_dapm_nc_pin(codec, "HSOL"); + snd_soc_dapm_nc_pin(codec, "HSOR"); + snd_soc_dapm_nc_pin(codec, "CARKITL"); + snd_soc_dapm_nc_pin(codec, "CARKITR"); + snd_soc_dapm_nc_pin(codec, "HFL"); + snd_soc_dapm_nc_pin(codec, "HFR"); + ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets, ARRAY_SIZE(omap3pandora_out_dapm_widgets)); if (ret < 0) @@ -180,18 +197,11 @@ static int omap3pandora_in_init(struct snd_soc_codec *codec) { int ret; - /* All TWL4030 output pins are floating */ - snd_soc_dapm_nc_pin(codec, "OUTL"), - snd_soc_dapm_nc_pin(codec, "OUTR"), - snd_soc_dapm_nc_pin(codec, "EARPIECE"), - snd_soc_dapm_nc_pin(codec, "PREDRIVEL"), - snd_soc_dapm_nc_pin(codec, "PREDRIVER"), - snd_soc_dapm_nc_pin(codec, "HSOL"), - snd_soc_dapm_nc_pin(codec, "HSOR"), - snd_soc_dapm_nc_pin(codec, "CARKITL"), - snd_soc_dapm_nc_pin(codec, "CARKITR"), - snd_soc_dapm_nc_pin(codec, "HFL"), - snd_soc_dapm_nc_pin(codec, "HFR"), + /* Not comnnected */ + snd_soc_dapm_nc_pin(codec, "HSMIC"); + snd_soc_dapm_nc_pin(codec, "CARKITMIC"); + snd_soc_dapm_nc_pin(codec, "DIGIMIC0"); + snd_soc_dapm_nc_pin(codec, "DIGIMIC1"); ret = snd_soc_dapm_new_controls(codec, omap3pandora_in_dapm_widgets, ARRAY_SIZE(omap3pandora_in_dapm_widgets)); @@ -251,10 +261,9 @@ static int __init omap3pandora_soc_init(void) { int ret; - if (!machine_is_omap3_pandora()) { - pr_debug(PREFIX "Not OMAP3 Pandora\n"); + if (!machine_is_omap3_pandora()) return -ENODEV; - } + pr_info("OMAP3 Pandora SoC init\n"); ret = gpio_request(OMAP3_PANDORA_DAC_POWER_GPIO, "dac_power"); -- cgit v1.2.3 From d563ffa6b319a4e401d096db9014a947590ca081 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sat, 31 Jan 2009 18:01:13 +0100 Subject: ALSA: pcxhr: fix trivial typo Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/pcxhr/pcxhr_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/pcxhr/pcxhr_core.h b/sound/pci/pcxhr/pcxhr_core.h index bbbd66d13a64..be0173796cdb 100644 --- a/sound/pci/pcxhr/pcxhr_core.h +++ b/sound/pci/pcxhr/pcxhr_core.h @@ -1,7 +1,7 @@ /* * Driver for Digigram pcxhr compatible soundcards * - * low level interface with interrupt ans message handling + * low level interface with interrupt and message handling * * Copyright (c) 2004 by Digigram * -- cgit v1.2.3 From 5626d3e86141390c8efc7bcb929b6a4b58b00480 Mon Sep 17 00:00:00 2001 From: James Morris Date: Fri, 30 Jan 2009 10:05:06 +1100 Subject: selinux: remove hooks which simply defer to capabilities Remove SELinux hooks which do nothing except defer to the capabilites hooks (or in one case, replicates the function). Signed-off-by: James Morris Acked-by: Stephen Smalley --- security/selinux/hooks.c | 68 +++++++----------------------------------------- 1 file changed, 10 insertions(+), 58 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index d9604794a4d2..a69d6f8970ca 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1892,6 +1892,16 @@ static int selinux_capset(struct cred *new, const struct cred *old, return cred_has_perm(old, new, PROCESS__SETCAP); } +/* + * (This comment used to live with the selinux_task_setuid hook, + * which was removed). + * + * Since setuid only affects the current process, and since the SELinux + * controls are not based on the Linux identity attributes, SELinux does not + * need to control this operation. However, SELinux does control the use of + * the CAP_SETUID and CAP_SETGID capabilities using the capable hook. + */ + static int selinux_capable(struct task_struct *tsk, const struct cred *cred, int cap, int audit) { @@ -2909,16 +2919,6 @@ static int selinux_inode_listsecurity(struct inode *inode, char *buffer, size_t return len; } -static int selinux_inode_need_killpriv(struct dentry *dentry) -{ - return secondary_ops->inode_need_killpriv(dentry); -} - -static int selinux_inode_killpriv(struct dentry *dentry) -{ - return secondary_ops->inode_killpriv(dentry); -} - static void selinux_inode_getsecid(const struct inode *inode, u32 *secid) { struct inode_security_struct *isec = inode->i_security; @@ -3288,29 +3288,6 @@ static int selinux_kernel_create_files_as(struct cred *new, struct inode *inode) return 0; } -static int selinux_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags) -{ - /* Since setuid only affects the current process, and - since the SELinux controls are not based on the Linux - identity attributes, SELinux does not need to control - this operation. However, SELinux does control the use - of the CAP_SETUID and CAP_SETGID capabilities using the - capable hook. */ - return 0; -} - -static int selinux_task_fix_setuid(struct cred *new, const struct cred *old, - int flags) -{ - return secondary_ops->task_fix_setuid(new, old, flags); -} - -static int selinux_task_setgid(gid_t id0, gid_t id1, gid_t id2, int flags) -{ - /* See the comment for setuid above. */ - return 0; -} - static int selinux_task_setpgid(struct task_struct *p, pid_t pgid) { return current_has_perm(p, PROCESS__SETPGID); @@ -3331,12 +3308,6 @@ static void selinux_task_getsecid(struct task_struct *p, u32 *secid) *secid = task_sid(p); } -static int selinux_task_setgroups(struct group_info *group_info) -{ - /* See the comment for setuid above. */ - return 0; -} - static int selinux_task_setnice(struct task_struct *p, int nice) { int rc; @@ -3417,18 +3388,6 @@ static int selinux_task_kill(struct task_struct *p, struct siginfo *info, return rc; } -static int selinux_task_prctl(int option, - unsigned long arg2, - unsigned long arg3, - unsigned long arg4, - unsigned long arg5) -{ - /* The current prctl operations do not appear to require - any SELinux controls since they merely observe or modify - the state of the current process. */ - return secondary_ops->task_prctl(option, arg2, arg3, arg4, arg5); -} - static int selinux_task_wait(struct task_struct *p) { return task_has_perm(p, current, PROCESS__SIGCHLD); @@ -5563,8 +5522,6 @@ static struct security_operations selinux_ops = { .inode_getsecurity = selinux_inode_getsecurity, .inode_setsecurity = selinux_inode_setsecurity, .inode_listsecurity = selinux_inode_listsecurity, - .inode_need_killpriv = selinux_inode_need_killpriv, - .inode_killpriv = selinux_inode_killpriv, .inode_getsecid = selinux_inode_getsecid, .file_permission = selinux_file_permission, @@ -5586,14 +5543,10 @@ static struct security_operations selinux_ops = { .cred_prepare = selinux_cred_prepare, .kernel_act_as = selinux_kernel_act_as, .kernel_create_files_as = selinux_kernel_create_files_as, - .task_setuid = selinux_task_setuid, - .task_fix_setuid = selinux_task_fix_setuid, - .task_setgid = selinux_task_setgid, .task_setpgid = selinux_task_setpgid, .task_getpgid = selinux_task_getpgid, .task_getsid = selinux_task_getsid, .task_getsecid = selinux_task_getsecid, - .task_setgroups = selinux_task_setgroups, .task_setnice = selinux_task_setnice, .task_setioprio = selinux_task_setioprio, .task_getioprio = selinux_task_getioprio, @@ -5603,7 +5556,6 @@ static struct security_operations selinux_ops = { .task_movememory = selinux_task_movememory, .task_kill = selinux_task_kill, .task_wait = selinux_task_wait, - .task_prctl = selinux_task_prctl, .task_to_inode = selinux_task_to_inode, .ipc_permission = selinux_ipc_permission, -- cgit v1.2.3 From 5aa13a94098ef5fc1bb0a7f531fdda8864ae67ff Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sun, 1 Feb 2009 21:13:15 +0100 Subject: ALSA: msnd: add module description and license for the snd-msnd-lib The missing module license generates warning during module loading. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/msnd/msnd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c index 264e08212c69..906454413ed2 100644 --- a/sound/isa/msnd/msnd.c +++ b/sound/isa/msnd/msnd.c @@ -700,3 +700,6 @@ int snd_msnd_pcm(struct snd_card *card, int device, } EXPORT_SYMBOL(snd_msnd_pcm); +MODULE_DESCRIPTION("Common routines for Turtle Beach Multisound drivers"); +MODULE_LICENSE("GPL"); + -- cgit v1.2.3 From e683ec4697c74c7d04ff8e90ec625ac34e25a7d8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 16:42:44 +0100 Subject: ALSA: ice1724 - Dynamic MIDI TX irq control MIDI_TX IRQ seems always pending when any bytes on FIFO is available. Thus, it's better to enable MPU_TX only when any bytres are really stored in the substream, and disables immediately when the queue becomes empty. Signed-off-by: Takashi Iwai --- sound/pci/ice1712/ice1724.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index bb8d8c766b9d..eb7872dec5ae 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -241,6 +241,8 @@ get_rawmidi_substream(struct snd_ice1712 *ice, unsigned int stream) struct snd_rawmidi_substream, list); } +static void enable_midi_irq(struct snd_ice1712 *ice, u8 flag, int enable); + static void vt1724_midi_write(struct snd_ice1712 *ice) { struct snd_rawmidi_substream *s; @@ -254,6 +256,11 @@ static void vt1724_midi_write(struct snd_ice1712 *ice) for (i = 0; i < count; ++i) outb(buffer[i], ICEREG1724(ice, MPU_DATA)); } + /* mask irq when all bytes have been transmitted. + * enabled again in output_trigger when the new data comes in. + */ + enable_midi_irq(ice, VT1724_IRQ_MPU_TX, + !snd_rawmidi_transmit_empty(s)); } static void vt1724_midi_read(struct snd_ice1712 *ice) @@ -272,31 +279,34 @@ static void vt1724_midi_read(struct snd_ice1712 *ice) } } -static void vt1724_enable_midi_irq(struct snd_rawmidi_substream *substream, - u8 flag, int enable) +/* call with ice->reg_lock */ +static void enable_midi_irq(struct snd_ice1712 *ice, u8 flag, int enable) { - struct snd_ice1712 *ice = substream->rmidi->private_data; - u8 mask; - - spin_lock_irq(&ice->reg_lock); - mask = inb(ICEREG1724(ice, IRQMASK)); + u8 mask = inb(ICEREG1724(ice, IRQMASK)); if (enable) mask &= ~flag; else mask |= flag; outb(mask, ICEREG1724(ice, IRQMASK)); +} + +static void vt1724_enable_midi_irq(struct snd_rawmidi_substream *substream, + u8 flag, int enable) +{ + struct snd_ice1712 *ice = substream->rmidi->private_data; + + spin_lock_irq(&ice->reg_lock); + enable_midi_irq(ice, flag, enable); spin_unlock_irq(&ice->reg_lock); } static int vt1724_midi_output_open(struct snd_rawmidi_substream *s) { - vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_TX, 1); return 0; } static int vt1724_midi_output_close(struct snd_rawmidi_substream *s) { - vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_TX, 0); return 0; } @@ -311,6 +321,7 @@ static void vt1724_midi_output_trigger(struct snd_rawmidi_substream *s, int up) vt1724_midi_write(ice); } else { ice->midi_output = 0; + enable_midi_irq(ice, VT1724_IRQ_MPU_TX, 0); } spin_unlock_irqrestore(&ice->reg_lock, flags); } @@ -320,6 +331,7 @@ static void vt1724_midi_output_drain(struct snd_rawmidi_substream *s) struct snd_ice1712 *ice = s->rmidi->private_data; unsigned long timeout; + vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_TX, 0); /* 32 bytes should be transmitted in less than about 12 ms */ timeout = jiffies + msecs_to_jiffies(15); do { @@ -389,24 +401,24 @@ static irqreturn_t snd_vt1724_interrupt(int irq, void *dev_id) status &= status_mask; if (status == 0) break; + spin_lock(&ice->reg_lock); if (++timeout > 10) { status = inb(ICEREG1724(ice, IRQSTAT)); printk(KERN_ERR "ice1724: Too long irq loop, " "status = 0x%x\n", status); if (status & VT1724_IRQ_MPU_TX) { printk(KERN_ERR "ice1724: Disabling MPU_TX\n"); - outb(inb(ICEREG1724(ice, IRQMASK)) | - VT1724_IRQ_MPU_TX, - ICEREG1724(ice, IRQMASK)); + enable_midi_irq(ice, VT1724_IRQ_MPU_TX, 0); } + spin_unlock(&ice->reg_lock); break; } handled = 1; if (status & VT1724_IRQ_MPU_TX) { - spin_lock(&ice->reg_lock); if (ice->midi_output) vt1724_midi_write(ice); - spin_unlock(&ice->reg_lock); + else + enable_midi_irq(ice, VT1724_IRQ_MPU_TX, 0); /* Due to mysterical reasons, MPU_TX is always * generated (and can't be cleared) when a PCM * playback is going. So let's ignore at the @@ -415,15 +427,14 @@ static irqreturn_t snd_vt1724_interrupt(int irq, void *dev_id) status_mask &= ~VT1724_IRQ_MPU_TX; } if (status & VT1724_IRQ_MPU_RX) { - spin_lock(&ice->reg_lock); if (ice->midi_input) vt1724_midi_read(ice); else vt1724_midi_clear_rx(ice); - spin_unlock(&ice->reg_lock); } /* ack MPU irq */ outb(status, ICEREG1724(ice, IRQSTAT)); + spin_unlock(&ice->reg_lock); if (status & VT1724_IRQ_MTPCM) { /* * Multi-track PCM -- cgit v1.2.3 From d9fb7fbddc9a14569aad517984c1a5b0b07002ea Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 2 Feb 2009 14:50:45 -0600 Subject: ASoC: fix build break in CS4270 codec driver Fix a oversight in the CS4270 codec driver that caused a build break. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index e5f5afdd3427..7962874258fb 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -149,7 +149,7 @@ struct cs4270_mode_ratios { u8 mclk; }; -static struct cs4270_mode_ratios[] = { +static struct cs4270_mode_ratios cs4270_mode_ratios[] = { {64, CS4270_MODE_4X, CS4270_MODE_DIV1}, #ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA {96, CS4270_MODE_4X, CS4270_MODE_DIV15}, -- cgit v1.2.3 From a6c255e0945160b76eabe983f59e2129e0c66246 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 2 Feb 2009 15:08:29 -0600 Subject: ASoC: fix message display in CS4270 codec driver Replace printk calls with dev_xxx calls. Set the 'dev' field of the codec and codec_dai structures so that these calls work. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 66 ++++++++++++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 27 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 7962874258fb..2c79a24186fd 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -212,7 +212,7 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, rates &= ~SNDRV_PCM_RATE_KNOT; if (!rates) { - printk(KERN_ERR "cs4270: could not find a valid sample rate\n"); + dev_err(codec->dev, "could not find a valid sample rate\n"); return -EINVAL; } @@ -253,7 +253,7 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK; break; default: - printk(KERN_ERR "cs4270: invalid DAI format\n"); + dev_err(codec->dev, "invalid dai format\n"); ret = -EINVAL; } @@ -284,7 +284,7 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec) CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache); if (length != CS4270_NUMREGS) { - printk(KERN_ERR "cs4270: I2C read failure, addr=0x%x\n", + dev_err(codec->dev, "i2c read failure, addr=0x%x\n", i2c_client->addr); return -EIO; } @@ -340,7 +340,7 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, if (cache[reg - CS4270_FIRSTREG] != value) { struct i2c_client *client = codec->control_data; if (i2c_smbus_write_byte_data(client, reg, value)) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return -EIO; } @@ -391,7 +391,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, if (i == NUM_MCLK_RATIOS) { /* We did not find a matching ratio */ - printk(KERN_ERR "cs4270: could not find matching ratio\n"); + dev_err(codec->dev, "could not find matching ratio\n"); return -EINVAL; } @@ -401,7 +401,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } @@ -413,7 +413,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, ret = snd_soc_write(codec, CS4270_MODE, reg); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } @@ -430,13 +430,13 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, reg |= CS4270_FORMAT_DAC_LJ | CS4270_FORMAT_ADC_LJ; break; default: - printk(KERN_ERR "cs4270: unknown format\n"); + dev_err(codec->dev, "unknown dai format\n"); return -EINVAL; } ret = snd_soc_write(codec, CS4270_FORMAT, reg); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } @@ -447,7 +447,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, reg &= ~CS4270_MUTE_AUTO; ret = snd_soc_write(codec, CS4270_MUTE, reg); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } @@ -460,7 +460,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); if (ret < 0) { - printk(KERN_ERR "I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } @@ -468,7 +468,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, ret = snd_soc_write(codec, CS4270_PWRCTL, 0); if (ret < 0) { - printk(KERN_ERR "cs4270: I2C write failed\n"); + dev_err(codec->dev, "i2c write failed\n"); return ret; } @@ -570,7 +570,7 @@ static int cs4270_probe(struct platform_device *pdev) /* Register PCMs */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to create PCMs\n"); + dev_err(codec->dev, "failed to create pcms\n"); return ret; } @@ -580,7 +580,7 @@ static int cs4270_probe(struct platform_device *pdev) kctrl = snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL); if (!kctrl) { - printk(KERN_ERR "cs4270: error creating control '%s'\n", + dev_err(codec->dev, "error creating control '%s'\n", cs4270_snd_controls[i].name); ret = -ENOMEM; goto error_free_pcms; @@ -588,7 +588,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_ctl_add(codec->card, kctrl); if (ret < 0) { - printk(KERN_ERR "cs4270: error adding control '%s'\n", + dev_err(codec->dev, "error adding control '%s'\n", cs4270_snd_controls[i].name); goto error_free_pcms; } @@ -597,7 +597,7 @@ static int cs4270_probe(struct platform_device *pdev) /* And finally, register the socdev */ ret = snd_soc_init_card(socdev); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to register card\n"); + dev_err(codec->dev, "failed to register card\n"); goto error_free_pcms; } @@ -643,9 +643,9 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, * comment for cs4270_codec. */ if (cs4270_codec) { - printk(KERN_ERR "cs4270: ignoring CS4270 at addr %X\n", + dev_err(&i2c_client->dev, "ignoring CS4270 at addr %X\n", i2c_client->addr); - printk(KERN_ERR "cs4270: only one CS4270 per board allowed\n"); + dev_err(&i2c_client->dev, "only one per board allowed\n"); /* Should we return something other than ENODEV here? */ return -ENODEV; } @@ -654,35 +654,35 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to read I2C at addr %X\n", + dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n", i2c_client->addr); return ret; } /* The top four bits of the chip ID should be 1100. */ if ((ret & 0xF0) != 0xC0) { - printk(KERN_ERR "cs4270: device at addr %X is not a CS4270\n", + dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n", i2c_client->addr); return -ENODEV; } - printk(KERN_INFO "cs4270: found device at I2C address %X\n", + dev_info(&i2c_client->dev, "found device at i2c address %X\n", i2c_client->addr); - printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF); + dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF); /* Allocate enough space for the snd_soc_codec structure and our private data together. */ cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL); if (!cs4270) { - printk(KERN_ERR "cs4270: Could not allocate codec structure\n"); + dev_err(&i2c_client->dev, "could not allocate codec\n"); return -ENOMEM; } codec = &cs4270->codec; - cs4270_codec = codec; mutex_init(&codec->mutex); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); + codec->dev = &i2c_client->dev; codec->name = "CS4270"; codec->owner = THIS_MODULE; codec->dai = &cs4270_dai; @@ -698,17 +698,25 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, ret = cs4270_fill_cache(codec); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to fill register cache\n"); + dev_err(&i2c_client->dev, "failed to fill register cache\n"); goto error_free_codec; } + /* Initialize the DAI. Normally, we'd prefer to have a kmalloc'd DAI + * structure for each CS4270 device, but the machine driver needs to + * have a pointer to the DAI structure, so for now it must be a global + * variable. + */ + cs4270_dai.dev = &i2c_client->dev; + /* Register the DAI. If all the other ASoC driver have already * registered, then this will call our probe function, so * cs4270_codec needs to be ready. */ + cs4270_codec = codec; ret = snd_soc_register_dai(&cs4270_dai); if (ret < 0) { - printk(KERN_ERR "cs4270: failed to register DAIe\n"); + dev_err(&i2c_client->dev, "failed to register DAIe\n"); goto error_free_codec; } @@ -718,6 +726,8 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, error_free_codec: kfree(cs4270); + cs4270_codec = NULL; + cs4270_dai.dev = NULL; return ret; } @@ -733,6 +743,8 @@ static int cs4270_i2c_remove(struct i2c_client *i2c_client) struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client); kfree(cs4270); + cs4270_codec = NULL; + cs4270_dai.dev = NULL; return 0; } @@ -776,7 +788,7 @@ EXPORT_SYMBOL_GPL(soc_codec_device_cs4270); static int __init cs4270_init(void) { - printk(KERN_INFO "Cirrus Logic CS4270 ALSA SoC Codec Driver\n"); + pr_info("Cirrus Logic CS4270 ALSA SoC Codec Driver\n"); return i2c_add_driver(&cs4270_i2c_driver); } -- cgit v1.2.3 From faa3aad75a959f55e7783f4dc7840253c7506571 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 2 Feb 2009 15:07:33 -0800 Subject: securityfs: fix long-broken securityfs_create_file comment If there is an error creating a file through securityfs_create_file, NULL is not returned, rather the error is propagated. Signed-off-by: Serge E. Hallyn Signed-off-by: James Morris --- security/inode.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/security/inode.c b/security/inode.c index efea5a605466..b41e708147ae 100644 --- a/security/inode.c +++ b/security/inode.c @@ -205,12 +205,11 @@ static int create_by_name(const char *name, mode_t mode, * This function returns a pointer to a dentry if it succeeds. This * pointer must be passed to the securityfs_remove() function when the file is * to be removed (no automatic cleanup happens if your module is unloaded, - * you are responsible here). If an error occurs, %NULL is returned. + * you are responsible here). If an error occurs, the function will return + * the erorr value (via ERR_PTR). * * If securityfs is not enabled in the kernel, the value %-ENODEV is - * returned. It is not wise to check for this value, but rather, check for - * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling - * code. + * returned. */ struct dentry *securityfs_create_file(const char *name, mode_t mode, struct dentry *parent, void *data, -- cgit v1.2.3 From 0883743825e34b81f3ff78aaee3a97cba57586c5 Mon Sep 17 00:00:00 2001 From: Rajiv Andrade Date: Mon, 2 Feb 2009 15:23:43 -0200 Subject: TPM: sysfs functions consolidation According to Dave Hansen's comments on the tpm_show_*, some of these functions present a pattern when allocating data[] memory space and also when setting its content. A new function was created so that this pattern could be consolidated. Also, replaced the data[] command vectors and its indexes by meaningful structures as pointed out by Matt Helsley too. Signed-off-by: Rajiv Andrade Signed-off-by: James Morris --- drivers/char/tpm/tpm.c | 411 +++++++++++++++++-------------------------------- drivers/char/tpm/tpm.h | 124 +++++++++++++++ 2 files changed, 266 insertions(+), 269 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 9c47dc48c9fd..9b9eb761cba9 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -429,134 +429,148 @@ out: #define TPM_DIGEST_SIZE 20 #define TPM_ERROR_SIZE 10 #define TPM_RET_CODE_IDX 6 -#define TPM_GET_CAP_RET_SIZE_IDX 10 -#define TPM_GET_CAP_RET_UINT32_1_IDX 14 -#define TPM_GET_CAP_RET_UINT32_2_IDX 18 -#define TPM_GET_CAP_RET_UINT32_3_IDX 22 -#define TPM_GET_CAP_RET_UINT32_4_IDX 26 -#define TPM_GET_CAP_PERM_DISABLE_IDX 16 -#define TPM_GET_CAP_PERM_INACTIVE_IDX 18 -#define TPM_GET_CAP_RET_BOOL_1_IDX 14 -#define TPM_GET_CAP_TEMP_INACTIVE_IDX 16 - -#define TPM_CAP_IDX 13 -#define TPM_CAP_SUBCAP_IDX 21 enum tpm_capabilities { - TPM_CAP_FLAG = 4, - TPM_CAP_PROP = 5, + TPM_CAP_FLAG = cpu_to_be32(4), + TPM_CAP_PROP = cpu_to_be32(5), + CAP_VERSION_1_1 = cpu_to_be32(0x06), + CAP_VERSION_1_2 = cpu_to_be32(0x1A) }; enum tpm_sub_capabilities { - TPM_CAP_PROP_PCR = 0x1, - TPM_CAP_PROP_MANUFACTURER = 0x3, - TPM_CAP_FLAG_PERM = 0x8, - TPM_CAP_FLAG_VOL = 0x9, - TPM_CAP_PROP_OWNER = 0x11, - TPM_CAP_PROP_TIS_TIMEOUT = 0x15, - TPM_CAP_PROP_TIS_DURATION = 0x20, -}; + TPM_CAP_PROP_PCR = cpu_to_be32(0x101), + TPM_CAP_PROP_MANUFACTURER = cpu_to_be32(0x103), + TPM_CAP_FLAG_PERM = cpu_to_be32(0x108), + TPM_CAP_FLAG_VOL = cpu_to_be32(0x109), + TPM_CAP_PROP_OWNER = cpu_to_be32(0x111), + TPM_CAP_PROP_TIS_TIMEOUT = cpu_to_be32(0x115), + TPM_CAP_PROP_TIS_DURATION = cpu_to_be32(0x120), -/* - * This is a semi generic GetCapability command for use - * with the capability type TPM_CAP_PROP or TPM_CAP_FLAG - * and their associated sub_capabilities. - */ - -static const u8 tpm_cap[] = { - 0, 193, /* TPM_TAG_RQU_COMMAND */ - 0, 0, 0, 22, /* length */ - 0, 0, 0, 101, /* TPM_ORD_GetCapability */ - 0, 0, 0, 0, /* TPM_CAP_ */ - 0, 0, 0, 4, /* TPM_CAP_SUB_ size */ - 0, 0, 1, 0 /* TPM_CAP_SUB_ */ }; -static ssize_t transmit_cmd(struct tpm_chip *chip, u8 *data, int len, - char *desc) +static ssize_t transmit_cmd(struct tpm_chip *chip, struct tpm_cmd_t *cmd, + int len, const char *desc) { int err; - len = tpm_transmit(chip, data, len); + len = tpm_transmit(chip,(u8 *) cmd, len); if (len < 0) return len; if (len == TPM_ERROR_SIZE) { - err = be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))); + err = be32_to_cpu(cmd->header.out.return_code); dev_dbg(chip->dev, "A TPM error (%d) occurred %s\n", err, desc); return err; } return 0; } +#define TPM_INTERNAL_RESULT_SIZE 200 +#define TPM_TAG_RQU_COMMAND cpu_to_be16(193) +#define TPM_ORD_GET_CAP cpu_to_be32(101) + +static const struct tpm_input_header tpm_getcap_header = { + .tag = TPM_TAG_RQU_COMMAND, + .length = cpu_to_be32(22), + .ordinal = TPM_ORD_GET_CAP +}; + +ssize_t tpm_getcap(struct device *dev, __be32 subcap_id, cap_t *cap, + const char *desc) +{ + struct tpm_cmd_t tpm_cmd; + int rc; + struct tpm_chip *chip = dev_get_drvdata(dev); + + tpm_cmd.header.in = tpm_getcap_header; + if (subcap_id == CAP_VERSION_1_1 || subcap_id == CAP_VERSION_1_2) { + tpm_cmd.params.getcap_in.cap = subcap_id; + /*subcap field not necessary */ + tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(0); + tpm_cmd.header.in.length -= cpu_to_be32(sizeof(__be32)); + } else { + if (subcap_id == TPM_CAP_FLAG_PERM || + subcap_id == TPM_CAP_FLAG_VOL) + tpm_cmd.params.getcap_in.cap = TPM_CAP_FLAG; + else + tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP; + tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4); + tpm_cmd.params.getcap_in.subcap = subcap_id; + } + rc = transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, desc); + if (!rc) + *cap = tpm_cmd.params.getcap_out.cap; + return rc; +} + void tpm_gen_interrupt(struct tpm_chip *chip) { - u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)]; + struct tpm_cmd_t tpm_cmd; ssize_t rc; - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT; + tpm_cmd.header.in = tpm_getcap_header; + tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP; + tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4); + tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT; - rc = transmit_cmd(chip, data, sizeof(data), + rc = transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, "attempting to determine the timeouts"); } EXPORT_SYMBOL_GPL(tpm_gen_interrupt); void tpm_get_timeouts(struct tpm_chip *chip) { - u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)]; + struct tpm_cmd_t tpm_cmd; + struct timeout_t *timeout_cap; + struct duration_t *duration_cap; ssize_t rc; u32 timeout; - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT; + tpm_cmd.header.in = tpm_getcap_header; + tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP; + tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4); + tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT; - rc = transmit_cmd(chip, data, sizeof(data), + rc = transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, "attempting to determine the timeouts"); if (rc) goto duration; - if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX))) + if (be32_to_cpu(tpm_cmd.header.out.length) != 4 * sizeof(u32)) goto duration; + timeout_cap = &tpm_cmd.params.getcap_out.cap.timeout; /* Don't overwrite default if value is 0 */ - timeout = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))); + timeout = be32_to_cpu(timeout_cap->a); if (timeout) chip->vendor.timeout_a = usecs_to_jiffies(timeout); - timeout = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX))); + timeout = be32_to_cpu(timeout_cap->b); if (timeout) chip->vendor.timeout_b = usecs_to_jiffies(timeout); - timeout = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX))); + timeout = be32_to_cpu(timeout_cap->c); if (timeout) chip->vendor.timeout_c = usecs_to_jiffies(timeout); - timeout = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_4_IDX))); + timeout = be32_to_cpu(timeout_cap->d); if (timeout) chip->vendor.timeout_d = usecs_to_jiffies(timeout); duration: - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_DURATION; + tpm_cmd.header.in = tpm_getcap_header; + tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP; + tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4); + tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_DURATION; - rc = transmit_cmd(chip, data, sizeof(data), + rc = transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, "attempting to determine the durations"); if (rc) return; - if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX))) + if (be32_to_cpu(tpm_cmd.header.out.return_code) != 3 * sizeof(u32)) return; - + duration_cap = &tpm_cmd.params.getcap_out.cap.duration; chip->vendor.duration[TPM_SHORT] = - usecs_to_jiffies(be32_to_cpu - (*((__be32 *) (data + - TPM_GET_CAP_RET_UINT32_1_IDX)))); + usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short)); /* The Broadcom BCM0102 chipset in a Dell Latitude D820 gets the above * value wrong and apparently reports msecs rather than usecs. So we * fix up the resulting too-small TPM_SHORT value to make things work. @@ -565,13 +579,9 @@ duration: chip->vendor.duration[TPM_SHORT] = HZ; chip->vendor.duration[TPM_MEDIUM] = - usecs_to_jiffies(be32_to_cpu - (*((__be32 *) (data + - TPM_GET_CAP_RET_UINT32_2_IDX)))); + usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_medium)); chip->vendor.duration[TPM_LONG] = - usecs_to_jiffies(be32_to_cpu - (*((__be32 *) (data + - TPM_GET_CAP_RET_UINT32_3_IDX)))); + usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_long)); } EXPORT_SYMBOL_GPL(tpm_get_timeouts); @@ -587,36 +597,18 @@ void tpm_continue_selftest(struct tpm_chip *chip) } EXPORT_SYMBOL_GPL(tpm_continue_selftest); -#define TPM_INTERNAL_RESULT_SIZE 200 - ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, char *buf) { - u8 *data; + cap_t cap; ssize_t rc; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_FLAG; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM; - - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, - "attemtping to determine the permanent enabled state"); - if (rc) { - kfree(data); + rc = tpm_getcap(dev, TPM_CAP_FLAG_PERM, &cap, + "attempting to determine the permanent enabled state"); + if (rc) return 0; - } - - rc = sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]); - kfree(data); + rc = sprintf(buf, "%d\n", !cap.perm_flags.disable); return rc; } EXPORT_SYMBOL_GPL(tpm_show_enabled); @@ -624,31 +616,15 @@ EXPORT_SYMBOL_GPL(tpm_show_enabled); ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, char *buf) { - u8 *data; + cap_t cap; ssize_t rc; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_FLAG; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM; - - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, - "attemtping to determine the permanent active state"); - if (rc) { - kfree(data); + rc = tpm_getcap(dev, TPM_CAP_FLAG_PERM, &cap, + "attempting to determine the permanent active state"); + if (rc) return 0; - } - rc = sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]); - - kfree(data); + rc = sprintf(buf, "%d\n", !cap.perm_flags.deactivated); return rc; } EXPORT_SYMBOL_GPL(tpm_show_active); @@ -656,31 +632,15 @@ EXPORT_SYMBOL_GPL(tpm_show_active); ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, char *buf) { - u8 *data; + cap_t cap; ssize_t rc; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_OWNER; - - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, - "attempting to determine the owner state"); - if (rc) { - kfree(data); + rc = tpm_getcap(dev, TPM_CAP_PROP_OWNER, &cap, + "attempting to determine the owner state"); + if (rc) return 0; - } - - rc = sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]); - kfree(data); + rc = sprintf(buf, "%d\n", cap.owned); return rc; } EXPORT_SYMBOL_GPL(tpm_show_owned); @@ -688,31 +648,15 @@ EXPORT_SYMBOL_GPL(tpm_show_owned); ssize_t tpm_show_temp_deactivated(struct device * dev, struct device_attribute * attr, char *buf) { - u8 *data; + cap_t cap; ssize_t rc; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_FLAG; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_VOL; - - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, - "attempting to determine the temporary state"); - if (rc) { - kfree(data); + rc = tpm_getcap(dev, TPM_CAP_FLAG_VOL, &cap, + "attempting to determine the temporary state"); + if (rc) return 0; - } - rc = sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]); - - kfree(data); + rc = sprintf(buf, "%d\n", cap.stclear_flags.deactivated); return rc; } EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated); @@ -727,77 +671,64 @@ static const u8 pcrread[] = { ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr, char *buf) { + cap_t cap; u8 *data; ssize_t rc; int i, j, num_pcrs; __be32 index; char *str = buf; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); if (!data) return -ENOMEM; - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_PCR; - - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, + rc = tpm_getcap(dev, TPM_CAP_PROP_PCR, &cap, "attempting to determine the number of PCRS"); - if (rc) { - kfree(data); + if (rc) return 0; - } - num_pcrs = be32_to_cpu(*((__be32 *) (data + 14))); + num_pcrs = be32_to_cpu(cap.num_pcrs); for (i = 0; i < num_pcrs; i++) { memcpy(data, pcrread, sizeof(pcrread)); index = cpu_to_be32(i); memcpy(data + 10, &index, 4); - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, - "attempting to read a PCR"); + rc = transmit_cmd(chip, (struct tpm_cmd_t *)data, + TPM_INTERNAL_RESULT_SIZE, + "attempting to read a PCR"); if (rc) - goto out; + break; str += sprintf(str, "PCR-%02d: ", i); for (j = 0; j < TPM_DIGEST_SIZE; j++) str += sprintf(str, "%02X ", *(data + 10 + j)); str += sprintf(str, "\n"); } -out: kfree(data); return str - buf; } EXPORT_SYMBOL_GPL(tpm_show_pcrs); #define READ_PUBEK_RESULT_SIZE 314 -static const u8 readpubek[] = { - 0, 193, /* TPM_TAG_RQU_COMMAND */ - 0, 0, 0, 30, /* length */ - 0, 0, 0, 124, /* TPM_ORD_ReadPubek */ +#define TPM_ORD_READPUBEK cpu_to_be32(124) +struct tpm_input_header tpm_readpubek_header = { + .tag = TPM_TAG_RQU_COMMAND, + .length = cpu_to_be32(30), + .ordinal = TPM_ORD_READPUBEK }; ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr, char *buf) { u8 *data; + struct tpm_cmd_t tpm_cmd; ssize_t err; int i, rc; char *str = buf; struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - data = kzalloc(READ_PUBEK_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, readpubek, sizeof(readpubek)); - - err = transmit_cmd(chip, data, READ_PUBEK_RESULT_SIZE, + tpm_cmd.header.in = tpm_readpubek_header; + err = transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE, "attempting to read the PUBEK"); if (err) goto out; @@ -812,7 +743,7 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr, 256 byte modulus ignore checksum 20 bytes */ - + data = tpm_cmd.params.readpubek_out_buffer; str += sprintf(str, "Algorithm: %02X %02X %02X %02X\nEncscheme: %02X %02X\n" @@ -832,65 +763,33 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr, } out: rc = str - buf; - kfree(data); return rc; } EXPORT_SYMBOL_GPL(tpm_show_pubek); -#define CAP_VERSION_1_1 6 -#define CAP_VERSION_1_2 0x1A -#define CAP_VERSION_IDX 13 -static const u8 cap_version[] = { - 0, 193, /* TPM_TAG_RQU_COMMAND */ - 0, 0, 0, 18, /* length */ - 0, 0, 0, 101, /* TPM_ORD_GetCapability */ - 0, 0, 0, 0, - 0, 0, 0, 0 -}; ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr, char *buf) { - u8 *data; + cap_t cap; ssize_t rc; char *str = buf; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER; - - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, + rc = tpm_getcap(dev, TPM_CAP_PROP_MANUFACTURER, &cap, "attempting to determine the manufacturer"); - if (rc) { - kfree(data); + if (rc) return 0; - } - str += sprintf(str, "Manufacturer: 0x%x\n", - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX)))); + be32_to_cpu(cap.manufacturer_id)); - memcpy(data, cap_version, sizeof(cap_version)); - data[CAP_VERSION_IDX] = CAP_VERSION_1_1; - rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE, - "attempting to determine the 1.1 version"); + rc = tpm_getcap(dev, CAP_VERSION_1_1, &cap, + "attempting to determine the 1.1 version"); if (rc) - goto out; - + return 0; str += sprintf(str, "TCG version: %d.%d\nFirmware version: %d.%d\n", - (int) data[14], (int) data[15], (int) data[16], - (int) data[17]); - -out: - kfree(data); + cap.tpm_version.Major, cap.tpm_version.Minor, + cap.tpm_version.revMajor, cap.tpm_version.revMinor); return str - buf; } EXPORT_SYMBOL_GPL(tpm_show_caps); @@ -898,51 +797,25 @@ EXPORT_SYMBOL_GPL(tpm_show_caps); ssize_t tpm_show_caps_1_2(struct device * dev, struct device_attribute * attr, char *buf) { - u8 *data; - ssize_t len; + cap_t cap; + ssize_t rc; char *str = buf; - struct tpm_chip *chip = dev_get_drvdata(dev); - if (chip == NULL) - return -ENODEV; - - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - - memcpy(data, tpm_cap, sizeof(tpm_cap)); - data[TPM_CAP_IDX] = TPM_CAP_PROP; - data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER; - - len = tpm_transmit(chip, data, TPM_INTERNAL_RESULT_SIZE); - if (len <= TPM_ERROR_SIZE) { - dev_dbg(chip->dev, "A TPM error (%d) occurred " - "attempting to determine the manufacturer\n", - be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX)))); - kfree(data); + rc = tpm_getcap(dev, TPM_CAP_PROP_MANUFACTURER, &cap, + "attempting to determine the manufacturer"); + if (rc) return 0; - } - str += sprintf(str, "Manufacturer: 0x%x\n", - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX)))); - - memcpy(data, cap_version, sizeof(cap_version)); - data[CAP_VERSION_IDX] = CAP_VERSION_1_2; - - len = tpm_transmit(chip, data, TPM_INTERNAL_RESULT_SIZE); - if (len <= TPM_ERROR_SIZE) { - dev_err(chip->dev, "A TPM error (%d) occurred " - "attempting to determine the 1.2 version\n", - be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX)))); - goto out; - } + be32_to_cpu(cap.manufacturer_id)); + rc = tpm_getcap(dev, CAP_VERSION_1_2, &cap, + "attempting to determine the 1.2 version"); + if (rc) + return 0; str += sprintf(str, "TCG version: %d.%d\nFirmware version: %d.%d\n", - (int) data[16], (int) data[17], (int) data[18], - (int) data[19]); - -out: - kfree(data); + cap.tpm_version_1_2.Major, cap.tpm_version_1_2.Minor, + cap.tpm_version_1_2.revMajor, + cap.tpm_version_1_2.revMinor); return str - buf; } EXPORT_SYMBOL_GPL(tpm_show_caps_1_2); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 8e30df4a4388..d64f6b7e5b82 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -123,6 +123,130 @@ static inline void tpm_write_index(int base, int index, int value) outb(index, base); outb(value & 0xFF, base+1); } +struct tpm_input_header { + __be16 tag; + __be32 length; + __be32 ordinal; +}__attribute__((packed)); + +struct tpm_output_header { + __be16 tag; + __be32 length; + __be32 return_code; +}__attribute__((packed)); + +struct stclear_flags_t { + __be16 tag; + u8 deactivated; + u8 disableForceClear; + u8 physicalPresence; + u8 physicalPresenceLock; + u8 bGlobalLock; +}__attribute__((packed)); + +struct tpm_version_t { + u8 Major; + u8 Minor; + u8 revMajor; + u8 revMinor; +}__attribute__((packed)); + +struct tpm_version_1_2_t { + __be16 tag; + u8 Major; + u8 Minor; + u8 revMajor; + u8 revMinor; +}__attribute__((packed)); + +struct timeout_t { + __be32 a; + __be32 b; + __be32 c; + __be32 d; +}__attribute__((packed)); + +struct duration_t { + __be32 tpm_short; + __be32 tpm_medium; + __be32 tpm_long; +}__attribute__((packed)); + +struct permanent_flags_t { + __be16 tag; + u8 disable; + u8 ownership; + u8 deactivated; + u8 readPubek; + u8 disableOwnerClear; + u8 allowMaintenance; + u8 physicalPresenceLifetimeLock; + u8 physicalPresenceHWEnable; + u8 physicalPresenceCMDEnable; + u8 CEKPUsed; + u8 TPMpost; + u8 TPMpostLock; + u8 FIPS; + u8 operator; + u8 enableRevokeEK; + u8 nvLocked; + u8 readSRKPub; + u8 tpmEstablished; + u8 maintenanceDone; + u8 disableFullDALogicInfo; +}__attribute__((packed)); + +typedef union { + struct permanent_flags_t perm_flags; + struct stclear_flags_t stclear_flags; + bool owned; + __be32 num_pcrs; + struct tpm_version_t tpm_version; + struct tpm_version_1_2_t tpm_version_1_2; + __be32 manufacturer_id; + struct timeout_t timeout; + struct duration_t duration; +} cap_t; + +struct tpm_getcap_params_in { + __be32 cap; + __be32 subcap_size; + __be32 subcap; +}__attribute__((packed)); + +struct tpm_getcap_params_out { + __be32 cap_size; + cap_t cap; +}__attribute__((packed)); + +struct tpm_readpubek_params_out { + u8 algorithm[4]; + u8 encscheme[2]; + u8 sigscheme[2]; + u8 parameters[12]; /*assuming RSA*/ + __be32 keysize; + u8 modulus[256]; + u8 checksum[20]; +}__attribute__((packed)); + +typedef union { + struct tpm_input_header in; + struct tpm_output_header out; +} tpm_cmd_header; + +typedef union { + struct tpm_getcap_params_out getcap_out; + struct tpm_readpubek_params_out readpubek_out; + u8 readpubek_out_buffer[sizeof(struct tpm_readpubek_params_out)]; + struct tpm_getcap_params_in getcap_in; +} tpm_cmd_params; + +struct tpm_cmd_t { + tpm_cmd_header header; + tpm_cmd_params params; +}__attribute__((packed)); + +ssize_t tpm_getcap(struct device *, __be32, cap_t *, const char *); extern void tpm_get_timeouts(struct tpm_chip *); extern void tpm_gen_interrupt(struct tpm_chip *); -- cgit v1.2.3 From 659aaf2bb5496a425ba14036b5b5900f593e4484 Mon Sep 17 00:00:00 2001 From: Rajiv Andrade Date: Mon, 2 Feb 2009 15:23:44 -0200 Subject: TPM: integrity interface This patch adds internal kernel support for: - reading/extending a pcr value - looking up the tpm_chip for a given chip number Signed-off-by: Rajiv Andrade Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- drivers/char/tpm/tpm.c | 129 +++++++++++++++++++++++++++++++++++++++++-------- drivers/char/tpm/tpm.h | 18 +++++++ include/linux/tpm.h | 35 ++++++++++++++ 3 files changed, 163 insertions(+), 19 deletions(-) create mode 100644 include/linux/tpm.h diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 9b9eb761cba9..62a5682578ca 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -661,28 +661,125 @@ ssize_t tpm_show_temp_deactivated(struct device * dev, } EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated); -static const u8 pcrread[] = { - 0, 193, /* TPM_TAG_RQU_COMMAND */ - 0, 0, 0, 14, /* length */ - 0, 0, 0, 21, /* TPM_ORD_PcrRead */ - 0, 0, 0, 0 /* PCR index */ +/* + * tpm_chip_find_get - return tpm_chip for given chip number + */ +static struct tpm_chip *tpm_chip_find_get(int chip_num) +{ + struct tpm_chip *pos; + + rcu_read_lock(); + list_for_each_entry_rcu(pos, &tpm_chip_list, list) { + if (chip_num != TPM_ANY_NUM && chip_num != pos->dev_num) + continue; + + if (try_module_get(pos->dev->driver->owner)) + break; + } + rcu_read_unlock(); + return pos; +} + +#define TPM_ORDINAL_PCRREAD cpu_to_be32(21) +#define READ_PCR_RESULT_SIZE 30 +static struct tpm_input_header pcrread_header = { + .tag = TPM_TAG_RQU_COMMAND, + .length = cpu_to_be32(14), + .ordinal = TPM_ORDINAL_PCRREAD +}; + +int __tpm_pcr_read(struct tpm_chip *chip, int pcr_idx, u8 *res_buf) +{ + int rc; + struct tpm_cmd_t cmd; + + cmd.header.in = pcrread_header; + cmd.params.pcrread_in.pcr_idx = cpu_to_be32(pcr_idx); + BUILD_BUG_ON(cmd.header.in.length > READ_PCR_RESULT_SIZE); + rc = transmit_cmd(chip, &cmd, cmd.header.in.length, + "attempting to read a pcr value"); + + if (rc == 0) + memcpy(res_buf, cmd.params.pcrread_out.pcr_result, + TPM_DIGEST_SIZE); + return rc; +} + +/** + * tpm_pcr_read - read a pcr value + * @chip_num: tpm idx # or ANY + * @pcr_idx: pcr idx to retrieve + * @res_buf: TPM_PCR value + * size of res_buf is 20 bytes (or NULL if you don't care) + * + * The TPM driver should be built-in, but for whatever reason it + * isn't, protect against the chip disappearing, by incrementing + * the module usage count. + */ +int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf) +{ + struct tpm_chip *chip; + int rc; + + chip = tpm_chip_find_get(chip_num); + if (chip == NULL) + return -ENODEV; + rc = __tpm_pcr_read(chip, pcr_idx, res_buf); + module_put(chip->dev->driver->owner); + return rc; +} +EXPORT_SYMBOL_GPL(tpm_pcr_read); + +/** + * tpm_pcr_extend - extend pcr value with hash + * @chip_num: tpm idx # or AN& + * @pcr_idx: pcr idx to extend + * @hash: hash value used to extend pcr value + * + * The TPM driver should be built-in, but for whatever reason it + * isn't, protect against the chip disappearing, by incrementing + * the module usage count. + */ +#define TPM_ORD_PCR_EXTEND cpu_to_be32(20) +#define EXTEND_PCR_SIZE 34 +static struct tpm_input_header pcrextend_header = { + .tag = TPM_TAG_RQU_COMMAND, + .length = cpu_to_be32(34), + .ordinal = TPM_ORD_PCR_EXTEND }; +int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash) +{ + struct tpm_cmd_t cmd; + int rc; + struct tpm_chip *chip; + + chip = tpm_chip_find_get(chip_num); + if (chip == NULL) + return -ENODEV; + + cmd.header.in = pcrextend_header; + BUILD_BUG_ON(be32_to_cpu(cmd.header.in.length) > EXTEND_PCR_SIZE); + cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(pcr_idx); + memcpy(cmd.params.pcrextend_in.hash, hash, TPM_DIGEST_SIZE); + rc = transmit_cmd(chip, &cmd, cmd.header.in.length, + "attempting extend a PCR value"); + + module_put(chip->dev->driver->owner); + return rc; +} +EXPORT_SYMBOL_GPL(tpm_pcr_extend); + ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr, char *buf) { cap_t cap; - u8 *data; + u8 digest[TPM_DIGEST_SIZE]; ssize_t rc; int i, j, num_pcrs; - __be32 index; char *str = buf; struct tpm_chip *chip = dev_get_drvdata(dev); - data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL); - if (!data) - return -ENOMEM; - rc = tpm_getcap(dev, TPM_CAP_PROP_PCR, &cap, "attempting to determine the number of PCRS"); if (rc) @@ -690,20 +787,14 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr, num_pcrs = be32_to_cpu(cap.num_pcrs); for (i = 0; i < num_pcrs; i++) { - memcpy(data, pcrread, sizeof(pcrread)); - index = cpu_to_be32(i); - memcpy(data + 10, &index, 4); - rc = transmit_cmd(chip, (struct tpm_cmd_t *)data, - TPM_INTERNAL_RESULT_SIZE, - "attempting to read a PCR"); + rc = __tpm_pcr_read(chip, i, digest); if (rc) break; str += sprintf(str, "PCR-%02d: ", i); for (j = 0; j < TPM_DIGEST_SIZE; j++) - str += sprintf(str, "%02X ", *(data + 10 + j)); + str += sprintf(str, "%02X ", digest[j]); str += sprintf(str, "\n"); } - kfree(data); return str - buf; } EXPORT_SYMBOL_GPL(tpm_show_pcrs); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index d64f6b7e5b82..8e00b4ddd083 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -26,6 +26,7 @@ #include #include #include +#include enum tpm_timeout { TPM_TIMEOUT = 5, /* msecs */ @@ -234,11 +235,28 @@ typedef union { struct tpm_output_header out; } tpm_cmd_header; +#define TPM_DIGEST_SIZE 20 +struct tpm_pcrread_out { + u8 pcr_result[TPM_DIGEST_SIZE]; +}__attribute__((packed)); + +struct tpm_pcrread_in { + __be32 pcr_idx; +}__attribute__((packed)); + +struct tpm_pcrextend_in { + __be32 pcr_idx; + u8 hash[TPM_DIGEST_SIZE]; +}__attribute__((packed)); + typedef union { struct tpm_getcap_params_out getcap_out; struct tpm_readpubek_params_out readpubek_out; u8 readpubek_out_buffer[sizeof(struct tpm_readpubek_params_out)]; struct tpm_getcap_params_in getcap_in; + struct tpm_pcrread_in pcrread_in; + struct tpm_pcrread_out pcrread_out; + struct tpm_pcrextend_in pcrextend_in; } tpm_cmd_params; struct tpm_cmd_t { diff --git a/include/linux/tpm.h b/include/linux/tpm.h new file mode 100644 index 000000000000..3338b3f5c21a --- /dev/null +++ b/include/linux/tpm.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2004,2007,2008 IBM Corporation + * + * Authors: + * Leendert van Doorn + * Dave Safford + * Reiner Sailer + * Kylene Hall + * Debora Velarde + * + * Maintained by: + * + * Device driver for TCG/TCPA TPM (trusted platform module). + * Specifications at www.trustedcomputinggroup.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + */ +#ifndef __LINUX_TPM_H__ +#define __LINUX_TPM_H__ + +/* + * Chip num is this value or a valid tpm idx + */ +#define TPM_ANY_NUM 0xFFFF + +#if defined(CONFIG_TCG_TPM) + +extern int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf); +extern int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash); +#endif +#endif -- cgit v1.2.3 From ba340e825f4b892782779abd0f93bcff7e763567 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Mon, 2 Feb 2009 19:01:30 +0000 Subject: ALSA: hda - Add tyan model for Realtek ALC262 The Realtek ALC262 on the Tyan Thunder n6650W (S2915-E) mainboard has a rather odd configuration template. As a result, the white AUX connector can not be used. This rewrites the default config to more accurately reflect the connector layout, colour and function. Unfortunately the black CD_IN connector, which is suspected to be widget 0x1c refuses to switch into input (0x20), instead opting to remain on 0x0. As such, no mixer controls are exposed for it. Autoswitching is implemented between the front headphone output and back line output. Signed-off-by: Tony Vroon Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 77 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0c81d92c3d75..bd9ef3363890 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -103,6 +103,7 @@ enum { ALC262_NEC, ALC262_TOSHIBA_S06, ALC262_TOSHIBA_RX1, + ALC262_TYAN, ALC262_AUTO, ALC262_MODEL_LAST /* last tag */ }; @@ -9509,6 +9510,67 @@ static struct snd_kcontrol_new alc262_benq_t31_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc262_tyan_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Aux Playback Volume", 0x0b, 0x06, HDA_INPUT), + HDA_CODEC_MUTE("Aux Playback Switch", 0x0b, 0x06, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), + { } /* end */ +}; + +static struct hda_verb alc262_tyan_verbs[] = { + /* Headphone automute */ + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* P11 AUX_IN, white 4-pin connector */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x14, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0xe1}, + {0x14, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0x93}, + {0x14, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x19}, + + {} +}; + +/* unsolicited event for HP jack sensing */ +static void alc262_tyan_automute(struct hda_codec *codec) +{ + unsigned int mute; + unsigned int present; + + snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0); + present = snd_hda_codec_read(codec, 0x1b, 0, + AC_VERB_GET_PIN_SENSE, 0); + present = (present & 0x80000000) != 0; + if (present) { + /* mute line output on ATX panel */ + snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, + HDA_AMP_MUTE, HDA_AMP_MUTE); + } else { + /* unmute line output if necessary */ + mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0); + snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, + HDA_AMP_MUTE, mute); + } +} + +static void alc262_tyan_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if ((res >> 26) != ALC880_HP_EVENT) + return; + alc262_tyan_automute(codec); +} + #define alc262_capture_mixer alc882_capture_mixer #define alc262_capture_alt_mixer alc882_capture_alt_mixer @@ -10626,6 +10688,7 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { [ALC262_ULTRA] = "ultra", [ALC262_LENOVO_3000] = "lenovo-3000", [ALC262_NEC] = "nec", + [ALC262_TYAN] = "tyan", [ALC262_AUTO] = "auto", }; @@ -10666,6 +10729,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x1179, 0xff7b, "Toshiba S06", ALC262_TOSHIBA_S06), SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU), SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU), + SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_TYAN), SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA), SND_PCI_QUIRK(0x144d, 0xc039, "Samsung Q1U EL", ALC262_ULTRA), SND_PCI_QUIRK(0x144d, 0xc510, "Samsung Q45", ALC262_HIPPO), @@ -10884,6 +10948,19 @@ static struct alc_config_preset alc262_presets[] = { .unsol_event = alc262_hippo_unsol_event, .init_hook = alc262_hippo_automute, }, + [ALC262_TYAN] = { + .mixers = { alc262_tyan_mixer }, + .init_verbs = { alc262_init_verbs, alc262_tyan_verbs}, + .num_dacs = ARRAY_SIZE(alc262_dac_nids), + .dac_nids = alc262_dac_nids, + .hp_nid = 0x02, + .dig_out_nid = ALC262_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc262_modes), + .channel_mode = alc262_modes, + .input_mux = &alc262_capture_source, + .unsol_event = alc262_tyan_unsol_event, + .init_hook = alc262_tyan_automute, + }, }; static int patch_alc262(struct hda_codec *codec) -- cgit v1.2.3 From 123848e77623b9996288e85433985439c157fcd0 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Tue, 3 Feb 2009 11:13:34 +0000 Subject: ALSA: Document tyan model for Realtek ALC262 As just pointed out to me, the new tyan model for ALC262 was implemented but not documented. This adds the board to the list, using both its marketing name (Thunder n6650W) and its model number (S2915-E). Signed-off-by: Tony Vroon Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index c9df9db5835a..8f40999a456e 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -56,6 +56,7 @@ ALC262 sony-assamd Sony ASSAMD toshiba-s06 Toshiba S06 toshiba-rx1 Toshiba RX1 + tyan Tyan Thunder n6650W (S2915-E) ultra Samsung Q1 Ultra Vista model lenovo-3000 Lenovo 3000 y410 nec NEC Versa S9100 -- cgit v1.2.3 From 111f6fbeb73fc350fe3a08c4ecd0ccdf3e13bef0 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Tue, 3 Feb 2009 15:52:56 +0200 Subject: ASoC: Don't unconditionally use the PLL in UDA1380 Without this fix driver switches to WSPLL in uda1380_pcm_prepare even if SYSCLK was chosen (uda1380_pcm_prepare modifies UDA1380_CLK register to disable R00_DAC_CLK before flushing reg cache) Signed-off-by: Vasily Khoruzhick Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index 98e4a6560f06..6e4a1770ce8d 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -418,8 +418,8 @@ static int uda1380_pcm_prepare(struct snd_pcm_substream *substream, uda1380_write(codec, reg, uda1380_read_reg_cache(codec, reg)); } - /* FIXME enable DAC_CLK */ - uda1380_write(codec, UDA1380_CLK, clk | R00_DAC_CLK); + /* FIXME restore DAC_CLK */ + uda1380_write(codec, UDA1380_CLK, clk); return 0; } -- cgit v1.2.3 From 508eb2ce222053e51e2243b7add8eeac85b1d250 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 4 Feb 2009 15:28:06 +0900 Subject: sh: Restrict old CMT timer code to SH-2/SH-2A. None of the other platforms use this, and need individual porting. Restrict it back to the supported set of CPU subtypes. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 50c992444e55..78a01d7d37ef 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -419,7 +419,7 @@ config SH_TMU config SH_CMT bool "CMT timer support" - depends on SYS_SUPPORTS_CMT + depends on SYS_SUPPORTS_CMT && CPU_SH2 default y help This enables the use of the CMT as the system timer. -- cgit v1.2.3 From 5b2474425ed2a625b75dcd8d648701e473b7d764 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 Feb 2009 17:19:40 +0100 Subject: ASoC: uda1380: split set_dai_fmt into _both, _playback and _capture variants This patch splits set_dai_fmt into three variants (single interface, dual interface playback only, dual interface capture only) so that data input and output formats can be configured separately for dual interface setups. Signed-off-by: Philipp Zabel Tested-by: Vasily Khoruzhick Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 68 +++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 61 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index 6e4a1770ce8d..5242b8156b38 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -356,7 +356,7 @@ static int uda1380_add_widgets(struct snd_soc_codec *codec) return 0; } -static int uda1380_set_dai_fmt(struct snd_soc_dai *codec_dai, +static int uda1380_set_dai_fmt_both(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; @@ -366,16 +366,70 @@ static int uda1380_set_dai_fmt(struct snd_soc_dai *codec_dai, iface = uda1380_read_reg_cache(codec, UDA1380_IFACE); iface &= ~(R01_SFORI_MASK | R01_SIM | R01_SFORO_MASK); - /* FIXME: how to select I2S for DATAO and MSB for DATAI correctly? */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: iface |= R01_SFORI_I2S | R01_SFORO_I2S; break; case SND_SOC_DAIFMT_LSB: - iface |= R01_SFORI_LSB16 | R01_SFORO_I2S; + iface |= R01_SFORI_LSB16 | R01_SFORO_LSB16; break; case SND_SOC_DAIFMT_MSB: - iface |= R01_SFORI_MSB | R01_SFORO_I2S; + iface |= R01_SFORI_MSB | R01_SFORO_MSB; + } + + if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) == SND_SOC_DAIFMT_CBM_CFM) + iface |= R01_SIM; + + uda1380_write(codec, UDA1380_IFACE, iface); + + return 0; +} + +static int uda1380_set_dai_fmt_playback(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int iface; + + /* set up DAI based upon fmt */ + iface = uda1380_read_reg_cache(codec, UDA1380_IFACE); + iface &= ~R01_SFORI_MASK; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= R01_SFORI_I2S; + break; + case SND_SOC_DAIFMT_LSB: + iface |= R01_SFORI_LSB16; + break; + case SND_SOC_DAIFMT_MSB: + iface |= R01_SFORI_MSB; + } + + uda1380_write(codec, UDA1380_IFACE, iface); + + return 0; +} + +static int uda1380_set_dai_fmt_capture(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int iface; + + /* set up DAI based upon fmt */ + iface = uda1380_read_reg_cache(codec, UDA1380_IFACE); + iface &= ~(R01_SIM | R01_SFORO_MASK); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= R01_SFORO_I2S; + break; + case SND_SOC_DAIFMT_LSB: + iface |= R01_SFORO_LSB16; + break; + case SND_SOC_DAIFMT_MSB: + iface |= R01_SFORO_MSB; } if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) == SND_SOC_DAIFMT_CBM_CFM) @@ -549,7 +603,7 @@ struct snd_soc_dai uda1380_dai[] = { .shutdown = uda1380_pcm_shutdown, .prepare = uda1380_pcm_prepare, .digital_mute = uda1380_mute, - .set_fmt = uda1380_set_dai_fmt, + .set_fmt = uda1380_set_dai_fmt_both, }, }, { /* playback only - dual interface */ @@ -566,7 +620,7 @@ struct snd_soc_dai uda1380_dai[] = { .shutdown = uda1380_pcm_shutdown, .prepare = uda1380_pcm_prepare, .digital_mute = uda1380_mute, - .set_fmt = uda1380_set_dai_fmt, + .set_fmt = uda1380_set_dai_fmt_playback, }, }, { /* capture only - dual interface*/ @@ -582,7 +636,7 @@ struct snd_soc_dai uda1380_dai[] = { .hw_params = uda1380_pcm_hw_params, .shutdown = uda1380_pcm_shutdown, .prepare = uda1380_pcm_prepare, - .set_fmt = uda1380_set_dai_fmt, + .set_fmt = uda1380_set_dai_fmt_capture, }, }, }; -- cgit v1.2.3 From 0664678a84c653bde844c7d91646259a25c6188b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 Feb 2009 21:18:26 +0100 Subject: ASoC: pxa-ssp: fix SSP port request PXA2xx/3xx SSP ports start from 1, not 0. Thus, the probe function requested the wrong SSP port. Correcting this unveiled another bug where ssp_init tries to request the already-requested SSP port again. So this patch replaces the ssp_init/exit calls with their internals from mach-pxa/ssp.c, leaving out the redundant ssp_request and the unneeded IRQ request. Effectively, that leaves us with not much more than enabling/disabling the SSP clock. Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- sound/soc/pxa/pxa-ssp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 73cb6b4c2f2d..4a973ab710be 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -21,6 +21,8 @@ #include #include +#include + #include #include #include @@ -221,9 +223,9 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, int ret = 0; if (!cpu_dai->active) { - ret = ssp_init(&priv->dev, cpu_dai->id + 1, SSP_NO_IRQ); - if (ret < 0) - return ret; + priv->dev.port = cpu_dai->id + 1; + priv->dev.irq = NO_IRQ; + clk_enable(priv->dev.ssp->clk); ssp_disable(&priv->dev); } return ret; @@ -238,7 +240,7 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, if (!cpu_dai->active) { ssp_disable(&priv->dev); - ssp_exit(&priv->dev); + clk_disable(priv->dev.ssp->clk); } } @@ -751,7 +753,7 @@ static int pxa_ssp_probe(struct platform_device *pdev, if (!priv) return -ENOMEM; - priv->dev.ssp = ssp_request(dai->id, "SoC audio"); + priv->dev.ssp = ssp_request(dai->id + 1, "SoC audio"); if (priv->dev.ssp == NULL) { ret = -ENODEV; goto err_priv; -- cgit v1.2.3 From 680cd53652d8bfb2b97d8c0248d1afb82de6b61d Mon Sep 17 00:00:00 2001 From: Kusanagi Kouichi Date: Thu, 5 Feb 2009 00:00:58 +0900 Subject: ALSA: hda: Add digital beep generator support for Realtek codecs. A digital beep generator can be used via input layer. Signed-off-by: Kusanagi Kouichi Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.h | 2 +- sound/pci/hda/patch_realtek.c | 62 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index b9679f081cae..51bf6a5daf39 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -39,7 +39,7 @@ struct hda_beep { int snd_hda_attach_beep_device(struct hda_codec *codec, int nid); void snd_hda_detach_beep_device(struct hda_codec *codec); #else -#define snd_hda_attach_beep_device(...) +#define snd_hda_attach_beep_device(...) 0 #define snd_hda_detach_beep_device(...) #endif #endif diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bd9ef3363890..0faa41bfc8be 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -30,6 +30,7 @@ #include #include "hda_codec.h" #include "hda_local.h" +#include "hda_beep.h" #define ALC880_FRONT_EVENT 0x01 #define ALC880_DCVOL_EVENT 0x02 @@ -3187,6 +3188,7 @@ static void alc_free(struct hda_codec *codec) alc_free_kctls(codec); kfree(spec); + snd_hda_detach_beep_device(codec); codec->spec = NULL; /* to be sure */ } @@ -4355,6 +4357,12 @@ static int patch_alc880(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC880_AUTO) setup_preset(spec, &alc880_presets[board_config]); @@ -5882,6 +5890,12 @@ static int patch_alc260(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC260_AUTO) setup_preset(spec, &alc260_presets[board_config]); @@ -7093,6 +7107,12 @@ static int patch_alc882(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC882_AUTO) setup_preset(spec, &alc882_presets[board_config]); @@ -9093,6 +9113,12 @@ static int patch_alc883(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC883_AUTO) setup_preset(spec, &alc883_presets[board_config]); @@ -11013,6 +11039,12 @@ static int patch_alc262(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC262_AUTO) setup_preset(spec, &alc262_presets[board_config]); @@ -12051,6 +12083,12 @@ static int patch_alc268(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC268_AUTO) setup_preset(spec, &alc268_presets[board_config]); @@ -12885,6 +12923,12 @@ static int patch_alc269(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC269_AUTO) setup_preset(spec, &alc269_presets[board_config]); @@ -13978,6 +14022,12 @@ static int patch_alc861(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x23); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC861_AUTO) setup_preset(spec, &alc861_presets[board_config]); @@ -14924,6 +14974,12 @@ static int patch_alc861vd(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x23); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC861VD_AUTO) setup_preset(spec, &alc861vd_presets[board_config]); @@ -16733,6 +16789,12 @@ static int patch_alc662(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (board_config != ALC662_AUTO) setup_preset(spec, &alc662_presets[board_config]); -- cgit v1.2.3 From 453e37b37521b613f0927fcf53ccd93ad3a8b3ae Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 4 Feb 2009 17:41:32 +0100 Subject: ALSA: sscape: drop redundant fields from soundscape struct The wss_base is disuised parameter for one function. It is converted to function parameter. The code_type is only set but never read. It is removed. The midi_vol is set only to 0 so it does not work as detection of change in midi volume. It is fixed. The xport variable is alias to the port[dev]. Use the port[dev] directly to increase readability. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 44 ++++++++++++++++---------------------------- 1 file changed, 16 insertions(+), 28 deletions(-) diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 681e2237acb7..33c1258029f9 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -135,8 +135,6 @@ enum card_type { struct soundscape { spinlock_t lock; unsigned io_base; - unsigned wss_base; - int codec_type; int ic_type; enum card_type type; struct resource *io_res; @@ -726,13 +724,7 @@ static int sscape_midi_get(struct snd_kcontrol *kctl, unsigned long flags; spin_lock_irqsave(&s->lock, flags); - set_host_mode_unsafe(s->io_base); - - if (host_write_ctrl_unsafe(s->io_base, CMD_GET_MIDI_VOL, 100)) { - uctl->value.integer.value[0] = host_read_ctrl_unsafe(s->io_base, 100); - } - - set_midi_mode_unsafe(s->io_base); + uctl->value.integer.value[0] = s->midi_vol; spin_unlock_irqrestore(&s->lock, flags); return 0; } @@ -767,6 +759,7 @@ static int sscape_midi_put(struct snd_kcontrol *kctl, change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); + s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127; __skip_change: /* @@ -809,12 +802,11 @@ static unsigned __devinit get_irq_config(int irq) * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. */ -static int __devinit detect_sscape(struct soundscape *s) +static int __devinit detect_sscape(struct soundscape *s, long wss_io) { unsigned long flags; unsigned d; int retval = 0; - int codec = s->wss_base; spin_lock_irqsave(&s->lock, flags); @@ -830,13 +822,11 @@ static int __devinit detect_sscape(struct soundscape *s) if ((d & 0x80) != 0) goto _done; - if (d == 0) { - s->codec_type = 1; + if (d == 0) s->ic_type = IC_ODIE; - } else if ((d & 0x60) != 0) { - s->codec_type = 2; + else if ((d & 0x60) != 0) s->ic_type = IC_OPUS; - } else + else goto _done; outb(0xfa, ODIE_ADDR_IO(s->io_base)); @@ -856,10 +846,10 @@ static int __devinit detect_sscape(struct soundscape *s) sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); if (s->type == SSCAPE_VIVO) - codec += 4; + wss_io += 4; /* wait for WSS codec */ for (d = 0; d < 500; d++) { - if ((inb(codec) & 0x80) == 0) + if ((inb(wss_io) & 0x80) == 0) break; spin_unlock_irqrestore(&s->lock, flags); msleep(1); @@ -1057,7 +1047,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) unsigned dma_cfg; unsigned irq_cfg; unsigned mpu_irq_cfg; - unsigned xport; struct resource *io_res; struct resource *wss_res; unsigned long flags; @@ -1077,15 +1066,15 @@ static int __devinit create_sscape(int dev, struct snd_card *card) printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); return -ENXIO; } - xport = port[dev]; /* * Grab IO ports that we will need to probe so that we * can detect and control this hardware ... */ - io_res = request_region(xport, 8, "SoundScape"); + io_res = request_region(port[dev], 8, "SoundScape"); if (!io_res) { - snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", xport); + snd_printk(KERN_ERR + "sscape: can't grab port 0x%lx\n", port[dev]); return -EBUSY; } wss_res = NULL; @@ -1112,10 +1101,9 @@ static int __devinit create_sscape(int dev, struct snd_card *card) spin_lock_init(&sscape->fwlock); sscape->io_res = io_res; sscape->wss_res = wss_res; - sscape->io_base = xport; - sscape->wss_base = wss_port[dev]; + sscape->io_base = port[dev]; - if (!detect_sscape(sscape)) { + if (!detect_sscape(sscape, wss_port[dev])) { printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); err = -ENODEV; goto _release_dma; @@ -1188,11 +1176,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, xport, mpu_irq[dev]); + err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " - "MPU-401 device at 0x%x\n", - xport); + "MPU-401 device at 0x%lx\n", + port[dev]); goto _release_dma; } -- cgit v1.2.3 From 5e7476243ad755fa1d8be2b1774d0aeb16bb48df Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Feb 2009 18:28:42 +0100 Subject: ALSA: msnd - Fix build error with CONFIG_PNP=n sound/isa/msnd/msnd_pinnacle.c:891: error: 'isapnp' undeclared (first use in this function) Signed-off-by: Takashi Iwai --- sound/isa/msnd/msnd_pinnacle.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index 70559223e8f3..60b6abd71612 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -785,6 +785,9 @@ static int calibrate_signal; static int isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); +#define has_isapnp(x) isapnp[x] +#else +#define has_isapnp(x) 0 #endif MODULE_AUTHOR("Karsten Wiese "); @@ -888,7 +891,7 @@ static int __devinit snd_msnd_isa_probe(struct device *pdev, unsigned int idx) struct snd_card *card; struct snd_msnd *chip; - if (isapnp[idx] || cfg[idx] == SNDRV_AUTO_PORT) { + if (has_isapnp(idx) || cfg[idx] == SNDRV_AUTO_PORT) { printk(KERN_INFO LOGNAME ": Assuming PnP mode\n"); return -ENODEV; } @@ -1082,7 +1085,7 @@ static int __devinit snd_msnd_pnp_detect(struct pnp_card_link *pcard, int ret; for ( ; idx < SNDRV_CARDS; idx++) { - if (isapnp[idx]) + if (has_isapnp(idx)) break; } if (idx >= SNDRV_CARDS) -- cgit v1.2.3 From 616f89e74cd954e04ae4f8bad6a3dc8730a4a47a Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 4 Feb 2009 11:23:19 -0500 Subject: ALSA: hda - Additional pin nids for STAC92HD71Bx and STAC92HD75Bx codecs Current code for STAC92HD71Bx and STAC92HD75Bx doesn't consider pin complexes 0x20 and 0x27. Also for 4 port models, nids 0x0e and 0x0f are vendor reserved. This commit changes code so it'll consider the additional pin complexes for models that have it, and avoid reserved nids to be touched on 4 port models. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 59 ++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a7df81efed23..58c9ff9d27f5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -481,10 +481,17 @@ static hda_nid_t stac92hd83xxx_pin_nids[14] = { 0x0f, 0x10, 0x11, 0x12, 0x13, 0x1d, 0x1e, 0x1f, 0x20 }; -static hda_nid_t stac92hd71bxx_pin_nids[11] = { + +#define STAC92HD71BXX_NUM_PINS 13 +static hda_nid_t stac92hd71bxx_pin_nids_4port[STAC92HD71BXX_NUM_PINS] = { + 0x0a, 0x0b, 0x0c, 0x0d, 0x00, + 0x00, 0x14, 0x18, 0x19, 0x1e, + 0x1f, 0x20, 0x27 +}; +static hda_nid_t stac92hd71bxx_pin_nids_6port[STAC92HD71BXX_NUM_PINS] = { 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x14, 0x18, 0x19, 0x1e, - 0x1f, + 0x1f, 0x20, 0x27 }; static hda_nid_t stac927x_pin_nids[14] = { @@ -1745,28 +1752,32 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { {} /* terminator */ }; -static unsigned int ref92hd71bxx_pin_configs[11] = { +static unsigned int ref92hd71bxx_pin_configs[STAC92HD71BXX_NUM_PINS] = { 0x02214030, 0x02a19040, 0x01a19020, 0x01014010, 0x0181302e, 0x01014010, 0x01019020, 0x90a000f0, - 0x90a000f0, 0x01452050, 0x01452050, + 0x90a000f0, 0x01452050, 0x01452050, 0x00000000, + 0x00000000 }; -static unsigned int dell_m4_1_pin_configs[11] = { +static unsigned int dell_m4_1_pin_configs[STAC92HD71BXX_NUM_PINS] = { 0x0421101f, 0x04a11221, 0x40f000f0, 0x90170110, 0x23a1902e, 0x23014250, 0x40f000f0, 0x90a000f0, - 0x40f000f0, 0x4f0000f0, 0x4f0000f0, + 0x40f000f0, 0x4f0000f0, 0x4f0000f0, 0x00000000, + 0x00000000 }; -static unsigned int dell_m4_2_pin_configs[11] = { +static unsigned int dell_m4_2_pin_configs[STAC92HD71BXX_NUM_PINS] = { 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110, 0x23a1902e, 0x23014250, 0x40f000f0, 0x40f000f0, - 0x40f000f0, 0x044413b0, 0x044413b0, + 0x40f000f0, 0x044413b0, 0x044413b0, 0x00000000, + 0x00000000 }; -static unsigned int dell_m4_3_pin_configs[11] = { +static unsigned int dell_m4_3_pin_configs[STAC92HD71BXX_NUM_PINS] = { 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110, 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0, - 0x40f000f0, 0x044413b0, 0x044413b0, + 0x40f000f0, 0x044413b0, 0x044413b0, 0x00000000, + 0x00000000 }; static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = { @@ -2311,7 +2322,9 @@ static int stac92xx_save_bios_config_regs(struct hda_codec *codec) for (i = 0; i < spec->num_pins; i++) { hda_nid_t nid = spec->pin_nids[i]; unsigned int pin_cfg; - + + if (!nid) + continue; pin_cfg = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0x00); snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x bios pin config %8.8x\n", @@ -2354,8 +2367,9 @@ static void stac92xx_set_config_regs(struct hda_codec *codec) return; for (i = 0; i < spec->num_pins; i++) - stac92xx_set_config_reg(codec, spec->pin_nids[i], - spec->pin_configs[i]); + if (spec->pin_nids[i] && spec->pin_configs[i]) + stac92xx_set_config_reg(codec, spec->pin_nids[i], + spec->pin_configs[i]); } static int stac_save_pin_cfgs(struct hda_codec *codec, unsigned int *pins) @@ -4952,9 +4966,21 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) codec->spec = spec; codec->patch_ops = stac92xx_patch_ops; - spec->num_pins = ARRAY_SIZE(stac92hd71bxx_pin_nids); + spec->num_pins = STAC92HD71BXX_NUM_PINS; + switch (codec->vendor_id) { + case 0x111d76b6: + case 0x111d76b7: + spec->pin_nids = stac92hd71bxx_pin_nids_4port; + break; + case 0x111d7603: + case 0x111d7608: + /* On 92HD75Bx 0x27 isn't a pin nid */ + spec->num_pins--; + /* fallthrough */ + default: + spec->pin_nids = stac92hd71bxx_pin_nids_6port; + } spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids); - spec->pin_nids = stac92hd71bxx_pin_nids; memcpy(&spec->private_dimux, &stac92hd71bxx_dmux, sizeof(stac92hd71bxx_dmux)); spec->board_config = snd_hda_check_board_config(codec, @@ -5018,7 +5044,8 @@ again: /* disable VSW */ spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF]; unmute_init++; - stac_change_pin_config(codec, 0xf, 0x40f000f0); + stac_change_pin_config(codec, 0x0f, 0x40f000f0); + stac_change_pin_config(codec, 0x19, 0x40f000f3); break; case 0x111d7603: /* 6 Port with Analog Mixer */ if ((codec->revision_id & 0xf) == 1) -- cgit v1.2.3 From 6df703aefc81252447c69d24d2863007de2338e9 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 4 Feb 2009 11:34:22 -0500 Subject: ALSA: hda - Dynamic detection of dmics/dmuxes/smuxes in stac92hd71bxx Detect the number of connected ports and number of smuxes dynamically, looking at pin configs, using new introduced functions stac92hd71bxx_connected_ports and stac92hd71bxx_connected_smuxes. Also use proper input mux configuration for 4port and 5port models. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 99 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 87 insertions(+), 12 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 58c9ff9d27f5..c36c1c0f9574 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4944,7 +4944,16 @@ again: return 0; } -static struct hda_input_mux stac92hd71bxx_dmux = { +static struct hda_input_mux stac92hd71bxx_dmux_nomixer = { + .num_items = 3, + .items = { + { "Analog Inputs", 0x00 }, + { "Digital Mic 1", 0x02 }, + { "Digital Mic 2", 0x03 }, + } +}; + +static struct hda_input_mux stac92hd71bxx_dmux_amixer = { .num_items = 4, .items = { { "Analog Inputs", 0x00 }, @@ -4954,11 +4963,57 @@ static struct hda_input_mux stac92hd71bxx_dmux = { } }; +static int stac92hd71bxx_connected_ports(struct hda_codec *codec, + hda_nid_t *nids, int num_nids) +{ + struct sigmatel_spec *spec = codec->spec; + int idx, num; + unsigned int def_conf; + + for (num = 0; num < num_nids; num++) { + for (idx = 0; idx < spec->num_pins; idx++) + if (spec->pin_nids[idx] == nids[num]) + break; + if (idx >= spec->num_pins) + break; + def_conf = get_defcfg_connect(spec->pin_configs[idx]); + if (def_conf == AC_JACK_PORT_NONE) + break; + } + return num; +} + +static int stac92hd71bxx_connected_smuxes(struct hda_codec *codec, + hda_nid_t dig0pin) +{ + struct sigmatel_spec *spec = codec->spec; + int idx; + + for (idx = 0; idx < spec->num_pins; idx++) + if (spec->pin_nids[idx] == dig0pin) + break; + if ((idx + 2) >= spec->num_pins) + return 0; + + /* dig1pin case */ + if (get_defcfg_connect(spec->pin_configs[idx+1]) != AC_JACK_PORT_NONE) + return 2; + + /* dig0pin + dig2pin case */ + if (get_defcfg_connect(spec->pin_configs[idx+2]) != AC_JACK_PORT_NONE) + return 2; + if (get_defcfg_connect(spec->pin_configs[idx]) != AC_JACK_PORT_NONE) + return 1; + else + return 0; +} + static int patch_stac92hd71bxx(struct hda_codec *codec) { struct sigmatel_spec *spec; struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init; int err = 0; + unsigned int ndmic_nids = 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -4981,8 +5036,6 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) spec->pin_nids = stac92hd71bxx_pin_nids_6port; } spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids); - memcpy(&spec->private_dimux, &stac92hd71bxx_dmux, - sizeof(stac92hd71bxx_dmux)); spec->board_config = snd_hda_check_board_config(codec, STAC_92HD71BXX_MODELS, stac92hd71bxx_models, @@ -5007,16 +5060,32 @@ again: spec->gpio_data = 0x01; } + spec->dmic_nids = stac92hd71bxx_dmic_nids; + spec->dmux_nids = stac92hd71bxx_dmux_nids; + switch (codec->vendor_id) { case 0x111d76b6: /* 4 Port without Analog Mixer */ case 0x111d76b7: case 0x111d76b4: /* 6 Port without Analog Mixer */ case 0x111d76b5: + memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_nomixer, + sizeof(stac92hd71bxx_dmux_nomixer)); spec->mixer = stac92hd71bxx_mixer; spec->init = stac92hd71bxx_core_init; codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; + spec->num_dmics = stac92hd71bxx_connected_ports(codec, + stac92hd71bxx_dmic_nids, + STAC92HD71BXX_NUM_DMICS); + if (spec->num_dmics) { + spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids); + spec->dinput_mux = &spec->private_dimux; + ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1; + } break; case 0x111d7608: /* 5 Port with Analog Mixer */ + memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer, + sizeof(stac92hd71bxx_dmux_amixer)); + spec->private_dimux.num_items--; switch (spec->board_config) { case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ @@ -5046,6 +5115,12 @@ again: unmute_init++; stac_change_pin_config(codec, 0x0f, 0x40f000f0); stac_change_pin_config(codec, 0x19, 0x40f000f3); + stac92hd71bxx_dmic_nids[STAC92HD71BXX_NUM_DMICS - 1] = 0; + spec->num_dmics = stac92hd71bxx_connected_ports(codec, + stac92hd71bxx_dmic_nids, + STAC92HD71BXX_NUM_DMICS - 1); + spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids); + ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 2; break; case 0x111d7603: /* 6 Port with Analog Mixer */ if ((codec->revision_id & 0xf) == 1) @@ -5055,10 +5130,17 @@ again: spec->num_pwrs = 0; /* fallthru */ default: + memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer, + sizeof(stac92hd71bxx_dmux_amixer)); spec->dinput_mux = &spec->private_dimux; spec->mixer = stac92hd71bxx_analog_mixer; spec->init = stac92hd71bxx_analog_core_init; codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; + spec->num_dmics = stac92hd71bxx_connected_ports(codec, + stac92hd71bxx_dmic_nids, + STAC92HD71BXX_NUM_DMICS); + spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids); + ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1; } if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP) @@ -5071,13 +5153,12 @@ again: spec->digbeep_nid = 0x26; spec->mux_nids = stac92hd71bxx_mux_nids; spec->adc_nids = stac92hd71bxx_adc_nids; - spec->dmic_nids = stac92hd71bxx_dmic_nids; - spec->dmux_nids = stac92hd71bxx_dmux_nids; spec->smux_nids = stac92hd71bxx_smux_nids; spec->pwr_nids = stac92hd71bxx_pwr_nids; spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids); spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids); + spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e); switch (spec->board_config) { case STAC_HP_M4: @@ -5097,17 +5178,11 @@ again: spec->num_smuxes = 0; spec->num_dmuxes = 0; break; - default: - spec->num_dmics = STAC92HD71BXX_NUM_DMICS; - spec->num_smuxes = ARRAY_SIZE(stac92hd71bxx_smux_nids); - spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids); }; spec->multiout.dac_nids = spec->dac_nids; if (spec->dinput_mux) - spec->private_dimux.num_items += - spec->num_dmics - - (ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1); + spec->private_dimux.num_items += spec->num_dmics - ndmic_nids; err = stac92xx_parse_auto_config(codec, 0x21, 0x23); if (!err) { -- cgit v1.2.3 From 29d4ab4d6e996ef4c71910c915611151c34f1c75 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 4 Feb 2009 11:37:27 -0500 Subject: ALSA: hda - Don't call stac92xx_parse_auto_config with wrong dig_in Don't use uneeded/wrong third parameter for stac92xx_parse_auto_config in patch_stac92hd71bxx (no SPDIF in). Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index c36c1c0f9574..0b00110a5a02 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5184,7 +5184,7 @@ again: if (spec->dinput_mux) spec->private_dimux.num_items += spec->num_dmics - ndmic_nids; - err = stac92xx_parse_auto_config(codec, 0x21, 0x23); + err = stac92xx_parse_auto_config(codec, 0x21, 0); if (!err) { if (spec->board_config < 0) { printk(KERN_WARNING "hda_codec: No auto-config is " -- cgit v1.2.3 From 45c1d85bcc6438454d104966c30fd2497ae1cdd7 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Wed, 4 Feb 2009 17:49:41 -0500 Subject: ALSA: hda: Added stac378x digital slave out struct Added the ADATOut nid to a slave digital outs struct to allow output via the DigOut pin. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0b00110a5a02..85dc642d1130 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -404,6 +404,10 @@ static hda_nid_t stac922x_mux_nids[2] = { 0x12, 0x13, }; +static hda_nid_t stac927x_slave_dig_outs[2] = { + 0x1f, 0, +}; + static hda_nid_t stac927x_adc_nids[3] = { 0x07, 0x08, 0x09 }; @@ -5320,6 +5324,7 @@ static int patch_stac927x(struct hda_codec *codec) return -ENOMEM; codec->spec = spec; + codec->slave_dig_outs = stac927x_slave_dig_outs; spec->num_pins = ARRAY_SIZE(stac927x_pin_nids); spec->pin_nids = stac927x_pin_nids; spec->board_config = snd_hda_check_board_config(codec, STAC_927X_MODELS, -- cgit v1.2.3 From 345d0b1964df83a6c3fff815fabd34e37265581f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 09:10:20 +0100 Subject: ALSA: hwdep - Make open callback optional Don't require the open callback as mandatory. Now all hwdeps ops can be optional. Signed-off-by: Takashi Iwai --- sound/core/hwdep.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index 195cafc5a553..a70ee7f1ed98 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -99,9 +99,6 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) if (hw == NULL) return -ENODEV; - if (!hw->ops.open) - return -ENXIO; - if (!try_module_get(hw->card->module)) return -EFAULT; @@ -113,6 +110,10 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) err = -EBUSY; break; } + if (!hw->ops.open) { + err = 0; + break; + } err = hw->ops.open(hw, file); if (err >= 0) break; @@ -151,7 +152,7 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) static int snd_hwdep_release(struct inode *inode, struct file * file) { - int err = -ENXIO; + int err = 0; struct snd_hwdep *hw = file->private_data; struct module *mod = hw->card->module; -- cgit v1.2.3 From e0d80648c0037b8b815317a52b782d4ea0c287f0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 09:17:50 +0100 Subject: ALSA: hwdep - Fix coding style Fix misc coding style issues in hwdep.h and add some comments. Signed-off-by: Takashi Iwai --- include/sound/hwdep.h | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) diff --git a/include/sound/hwdep.h b/include/sound/hwdep.h index d9eea013c753..8c05e47a4090 100644 --- a/include/sound/hwdep.h +++ b/include/sound/hwdep.h @@ -27,18 +27,28 @@ struct snd_hwdep; +/* hwdep file ops; all ops can be NULL */ struct snd_hwdep_ops { - long long (*llseek) (struct snd_hwdep *hw, struct file * file, long long offset, int orig); - long (*read) (struct snd_hwdep *hw, char __user *buf, long count, loff_t *offset); - long (*write) (struct snd_hwdep *hw, const char __user *buf, long count, loff_t *offset); - int (*open) (struct snd_hwdep * hw, struct file * file); - int (*release) (struct snd_hwdep *hw, struct file * file); - unsigned int (*poll) (struct snd_hwdep *hw, struct file * file, poll_table * wait); - int (*ioctl) (struct snd_hwdep *hw, struct file * file, unsigned int cmd, unsigned long arg); - int (*ioctl_compat) (struct snd_hwdep *hw, struct file * file, unsigned int cmd, unsigned long arg); - int (*mmap) (struct snd_hwdep *hw, struct file * file, struct vm_area_struct * vma); - int (*dsp_status) (struct snd_hwdep *hw, struct snd_hwdep_dsp_status *status); - int (*dsp_load) (struct snd_hwdep *hw, struct snd_hwdep_dsp_image *image); + long long (*llseek)(struct snd_hwdep *hw, struct file *file, + long long offset, int orig); + long (*read)(struct snd_hwdep *hw, char __user *buf, + long count, loff_t *offset); + long (*write)(struct snd_hwdep *hw, const char __user *buf, + long count, loff_t *offset); + int (*open)(struct snd_hwdep *hw, struct file * file); + int (*release)(struct snd_hwdep *hw, struct file * file); + unsigned int (*poll)(struct snd_hwdep *hw, struct file *file, + poll_table *wait); + int (*ioctl)(struct snd_hwdep *hw, struct file *file, + unsigned int cmd, unsigned long arg); + int (*ioctl_compat)(struct snd_hwdep *hw, struct file *file, + unsigned int cmd, unsigned long arg); + int (*mmap)(struct snd_hwdep *hw, struct file *file, + struct vm_area_struct *vma); + int (*dsp_status)(struct snd_hwdep *hw, + struct snd_hwdep_dsp_status *status); + int (*dsp_load)(struct snd_hwdep *hw, + struct snd_hwdep_dsp_image *image); }; struct snd_hwdep { @@ -61,9 +71,9 @@ struct snd_hwdep { void (*private_free) (struct snd_hwdep *hwdep); struct mutex open_mutex; - int used; - unsigned int dsp_loaded; - unsigned int exclusive: 1; + int used; /* reference counter */ + unsigned int dsp_loaded; /* bit fields of loaded dsp indices */ + unsigned int exclusive:1; /* exclusive access mode */ }; extern int snd_hwdep_new(struct snd_card *card, char *id, int device, -- cgit v1.2.3 From 28b7e343ee63454d563a71d2d5f769fc297fd5ad Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 09:28:08 +0100 Subject: ALSA: Remove superfluous hwdep ops Remove NOP hwdep ops in sound drivers. Signed-off-by: Takashi Iwai --- sound/drivers/vx/vx_hwdep.c | 12 ------------ sound/pci/mixart/mixart_hwdep.c | 12 ------------ sound/pci/pcxhr/pcxhr_hwdep.c | 12 ------------ sound/pci/rme9652/hdsp.c | 9 --------- sound/pci/rme9652/hdspm.c | 9 --------- sound/synth/emux/emux_hwdep.c | 21 --------------------- sound/usb/usbmixer.c | 22 +--------------------- sound/usb/usx2y/usX2Yhwdep.c | 12 ------------ 8 files changed, 1 insertion(+), 108 deletions(-) diff --git a/sound/drivers/vx/vx_hwdep.c b/sound/drivers/vx/vx_hwdep.c index 8d6362e2d4c9..46df8817c18f 100644 --- a/sound/drivers/vx/vx_hwdep.c +++ b/sound/drivers/vx/vx_hwdep.c @@ -119,16 +119,6 @@ void snd_vx_free_firmware(struct vx_core *chip) #else /* old style firmware loading */ -static int vx_hwdep_open(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - -static int vx_hwdep_release(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - static int vx_hwdep_dsp_status(struct snd_hwdep *hw, struct snd_hwdep_dsp_status *info) { @@ -243,8 +233,6 @@ int snd_vx_setup_firmware(struct vx_core *chip) hw->iface = SNDRV_HWDEP_IFACE_VX; hw->private_data = chip; - hw->ops.open = vx_hwdep_open; - hw->ops.release = vx_hwdep_release; hw->ops.dsp_status = vx_hwdep_dsp_status; hw->ops.dsp_load = vx_hwdep_dsp_load; hw->exclusive = 1; diff --git a/sound/pci/mixart/mixart_hwdep.c b/sound/pci/mixart/mixart_hwdep.c index 3782b52bc0e8..fa4de985fc4c 100644 --- a/sound/pci/mixart/mixart_hwdep.c +++ b/sound/pci/mixart/mixart_hwdep.c @@ -581,16 +581,6 @@ MODULE_FIRMWARE("mixart/miXart8AES.xlx"); /* miXart hwdep interface id string */ #define SND_MIXART_HWDEP_ID "miXart Loader" -static int mixart_hwdep_open(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - -static int mixart_hwdep_release(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - static int mixart_hwdep_dsp_status(struct snd_hwdep *hw, struct snd_hwdep_dsp_status *info) { @@ -643,8 +633,6 @@ int snd_mixart_setup_firmware(struct mixart_mgr *mgr) hw->iface = SNDRV_HWDEP_IFACE_MIXART; hw->private_data = mgr; - hw->ops.open = mixart_hwdep_open; - hw->ops.release = mixart_hwdep_release; hw->ops.dsp_status = mixart_hwdep_dsp_status; hw->ops.dsp_load = mixart_hwdep_dsp_load; hw->exclusive = 1; diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c index 592743a298b0..17cb1233a903 100644 --- a/sound/pci/pcxhr/pcxhr_hwdep.c +++ b/sound/pci/pcxhr/pcxhr_hwdep.c @@ -471,16 +471,6 @@ static int pcxhr_hwdep_dsp_load(struct snd_hwdep *hw, return 0; } -static int pcxhr_hwdep_open(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - -static int pcxhr_hwdep_release(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - int pcxhr_setup_firmware(struct pcxhr_mgr *mgr) { int err; @@ -495,8 +485,6 @@ int pcxhr_setup_firmware(struct pcxhr_mgr *mgr) hw->iface = SNDRV_HWDEP_IFACE_PCXHR; hw->private_data = mgr; - hw->ops.open = pcxhr_hwdep_open; - hw->ops.release = pcxhr_hwdep_release; hw->ops.dsp_status = pcxhr_hwdep_dsp_status; hw->ops.dsp_load = pcxhr_hwdep_dsp_load; hw->exclusive = 1; diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 44d0c15e2b71..2434609b2d35 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -4413,13 +4413,6 @@ static int snd_hdsp_capture_release(struct snd_pcm_substream *substream) return 0; } -static int snd_hdsp_hwdep_dummy_op(struct snd_hwdep *hw, struct file *file) -{ - /* we have nothing to initialize but the call is required */ - return 0; -} - - /* helper functions for copying meter values */ static inline int copy_u32_le(void __user *dest, void __iomem *src) { @@ -4738,9 +4731,7 @@ static int snd_hdsp_create_hwdep(struct snd_card *card, struct hdsp *hdsp) hw->private_data = hdsp; strcpy(hw->name, "HDSP hwdep interface"); - hw->ops.open = snd_hdsp_hwdep_dummy_op; hw->ops.ioctl = snd_hdsp_hwdep_ioctl; - hw->ops.release = snd_hdsp_hwdep_dummy_op; return 0; } diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 71231cf1b2b0..df2034eb235d 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -4100,13 +4100,6 @@ static int snd_hdspm_capture_release(struct snd_pcm_substream *substream) return 0; } -static int snd_hdspm_hwdep_dummy_op(struct snd_hwdep * hw, struct file *file) -{ - /* we have nothing to initialize but the call is required */ - return 0; -} - - static int snd_hdspm_hwdep_ioctl(struct snd_hwdep * hw, struct file *file, unsigned int cmd, unsigned long arg) { @@ -4213,9 +4206,7 @@ static int __devinit snd_hdspm_create_hwdep(struct snd_card *card, hw->private_data = hdspm; strcpy(hw->name, "HDSPM hwdep interface"); - hw->ops.open = snd_hdspm_hwdep_dummy_op; hw->ops.ioctl = snd_hdspm_hwdep_ioctl; - hw->ops.release = snd_hdspm_hwdep_dummy_op; return 0; } diff --git a/sound/synth/emux/emux_hwdep.c b/sound/synth/emux/emux_hwdep.c index 0a5391436add..ff0b2a8fd25b 100644 --- a/sound/synth/emux/emux_hwdep.c +++ b/sound/synth/emux/emux_hwdep.c @@ -24,25 +24,6 @@ #include #include "emux_voice.h" -/* - * open the hwdep device - */ -static int -snd_emux_hwdep_open(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - - -/* - * close the device - */ -static int -snd_emux_hwdep_release(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - #define TMP_CLIENT_ID 0x1001 @@ -146,8 +127,6 @@ snd_emux_init_hwdep(struct snd_emux *emu) emu->hwdep = hw; strcpy(hw->name, SNDRV_EMUX_HWDEP_NAME); hw->iface = SNDRV_HWDEP_IFACE_EMUX_WAVETABLE; - hw->ops.open = snd_emux_hwdep_open; - hw->ops.release = snd_emux_hwdep_release; hw->ops.ioctl = snd_emux_hwdep_ioctl; hw->exclusive = 1; hw->private_data = emu; diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 00397c8a765b..2bde79216fa5 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -78,7 +78,6 @@ struct usb_mixer_interface { /* Sound Blaster remote control stuff */ const struct rc_config *rc_cfg; - unsigned long rc_hwdep_open; u32 rc_code; wait_queue_head_t rc_waitq; struct urb *rc_urb; @@ -1797,24 +1796,6 @@ static void snd_usb_soundblaster_remote_complete(struct urb *urb) wake_up(&mixer->rc_waitq); } -static int snd_usb_sbrc_hwdep_open(struct snd_hwdep *hw, struct file *file) -{ - struct usb_mixer_interface *mixer = hw->private_data; - - if (test_and_set_bit(0, &mixer->rc_hwdep_open)) - return -EBUSY; - return 0; -} - -static int snd_usb_sbrc_hwdep_release(struct snd_hwdep *hw, struct file *file) -{ - struct usb_mixer_interface *mixer = hw->private_data; - - clear_bit(0, &mixer->rc_hwdep_open); - smp_mb__after_clear_bit(); - return 0; -} - static long snd_usb_sbrc_hwdep_read(struct snd_hwdep *hw, char __user *buf, long count, loff_t *offset) { @@ -1867,9 +1848,8 @@ static int snd_usb_soundblaster_remote_init(struct usb_mixer_interface *mixer) hwdep->iface = SNDRV_HWDEP_IFACE_SB_RC; hwdep->private_data = mixer; hwdep->ops.read = snd_usb_sbrc_hwdep_read; - hwdep->ops.open = snd_usb_sbrc_hwdep_open; - hwdep->ops.release = snd_usb_sbrc_hwdep_release; hwdep->ops.poll = snd_usb_sbrc_hwdep_poll; + hwdep->exclusive = 1; mixer->rc_urb = usb_alloc_urb(0, GFP_KERNEL); if (!mixer->rc_urb) diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c index 1558a5c4094f..a26d8d83d3eb 100644 --- a/sound/usb/usx2y/usX2Yhwdep.c +++ b/sound/usb/usx2y/usX2Yhwdep.c @@ -106,16 +106,6 @@ static unsigned int snd_us428ctls_poll(struct snd_hwdep *hw, struct file *file, } -static int snd_usX2Y_hwdep_open(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - -static int snd_usX2Y_hwdep_release(struct snd_hwdep *hw, struct file *file) -{ - return 0; -} - static int snd_usX2Y_hwdep_dsp_status(struct snd_hwdep *hw, struct snd_hwdep_dsp_status *info) { @@ -267,8 +257,6 @@ int usX2Y_hwdep_new(struct snd_card *card, struct usb_device* device) hw->iface = SNDRV_HWDEP_IFACE_USX2Y; hw->private_data = usX2Y(card); - hw->ops.open = snd_usX2Y_hwdep_open; - hw->ops.release = snd_usX2Y_hwdep_release; hw->ops.dsp_status = snd_usX2Y_hwdep_dsp_status; hw->ops.dsp_load = snd_usX2Y_hwdep_dsp_load; hw->ops.mmap = snd_us428ctls_mmap; -- cgit v1.2.3 From 705350f8bd6b44fda3f0dcc3e6f4b453da4378dd Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Wed, 4 Feb 2009 22:34:30 +0000 Subject: ALSA: snd-usb-caiaq: Send the correct command when setting controls Fixes a bug where an incorrect command was sent which had no effect on the device. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/caiaq-control.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c index 6ac5489a0f22..1f9531d0fce4 100644 --- a/sound/usb/caiaq/caiaq-control.c +++ b/sound/usb/caiaq/caiaq-control.c @@ -94,7 +94,7 @@ static int control_put(struct snd_kcontrol *kcontrol, if (pos & CNT_INTVAL) { dev->control_state[pos & ~CNT_INTVAL] = ucontrol->value.integer.value[0]; - snd_usb_caiaq_send_command(dev, EP1_CMD_DIMM_LEDS, + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, dev->control_state, sizeof(dev->control_state)); } else { if (ucontrol->value.integer.value[0]) -- cgit v1.2.3 From e3ca4c9982e3b84da859ca20a3ca0a9d5bda8c30 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Wed, 4 Feb 2009 22:34:31 +0000 Subject: ALSA: snd-usb-caiaq: Set default input mode of A4DJ Do not start the device with input mode undefined. Mimic the behaviour of the Audio 8 DJ and start in phono input mode. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/caiaq-device.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index d09fc2a88cf3..94610dda8ab4 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -312,6 +312,12 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev) } break; + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): + /* Audio 4 DJ - default input mode to phono */ + dev->control_state[0] = 2; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, + dev->control_state, 1); + break; } if (dev->spec.num_analog_audio_out + -- cgit v1.2.3 From 9a9527ed49f45e75a5b005592a261ab2bd7c1b1d Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Wed, 4 Feb 2009 22:34:32 +0000 Subject: ALSA: snd-usb-caiaq: Do not expose hardware input mode 0 of A4DJ In the context of the Audio 4 DJ (when compared to Audio 8 DJ), hardware input mode 0 is not used. Expose modes 1 (line) and 2 (phono) to the user as modes 0 and 1 respectively. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/caiaq-control.c | 32 +++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c index 1f9531d0fce4..136ef34300d1 100644 --- a/sound/usb/caiaq/caiaq-control.c +++ b/sound/usb/caiaq/caiaq-control.c @@ -44,16 +44,24 @@ static int control_info(struct snd_kcontrol *kcontrol, uinfo->count = 1; pos &= ~CNT_INTVAL; - if (((id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) || - (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ))) + if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ) && (pos == 0)) { - /* current input mode of A8DJ and A4DJ */ + /* current input mode of A8DJ */ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->value.integer.min = 0; uinfo->value.integer.max = 2; return 0; } + if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ) + && (pos == 0)) { + /* current input mode of A4DJ */ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; + } + if (is_intval) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->value.integer.min = 0; @@ -74,6 +82,14 @@ static int control_get(struct snd_kcontrol *kcontrol, struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); int pos = kcontrol->private_value; + if (dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { + /* A4DJ has only one control */ + /* do not expose hardware input mode 0 */ + ucontrol->value.integer.value[0] = dev->control_state[0] - 1; + return 0; + } + if (pos & CNT_INTVAL) ucontrol->value.integer.value[0] = dev->control_state[pos & ~CNT_INTVAL]; @@ -91,6 +107,16 @@ static int control_put(struct snd_kcontrol *kcontrol, struct snd_usb_caiaqdev *dev = caiaqdev(chip->card); int pos = kcontrol->private_value; + if (dev->chip.usb_id == + USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) { + /* A4DJ has only one control */ + /* do not expose hardware input mode 0 */ + dev->control_state[0] = ucontrol->value.integer.value[0] + 1; + snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, + dev->control_state, sizeof(dev->control_state)); + return 1; + } + if (pos & CNT_INTVAL) { dev->control_state[pos & ~CNT_INTVAL] = ucontrol->value.integer.value[0]; -- cgit v1.2.3 From a8564155a9cb3b5c4a18afc451679a1f02c647b5 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Wed, 4 Feb 2009 22:34:33 +0000 Subject: ALSA: snd-usb-caiaq: Remove duplicate A8DJ control Remove a duplicate control which causes an error when it is registered, and causes later controls to not be registered. The device does not have a fourth ground lift control. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/caiaq-control.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c index 136ef34300d1..e92c2bbf4fe9 100644 --- a/sound/usb/caiaq/caiaq-control.c +++ b/sound/usb/caiaq/caiaq-control.c @@ -270,7 +270,6 @@ static struct caiaq_controller a8dj_controller[] = { { "GND lift for TC Vinyl mode", 24 + 0 }, { "GND lift for TC CD/Line mode", 24 + 1 }, { "GND lift for phono mode", 24 + 2 }, - { "GND lift for TC Vinyl mode", 24 + 3 }, { "Software lock", 40 } }; -- cgit v1.2.3 From 238c0270baade3a542c1497712dd8e66cc9cc476 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Wed, 4 Feb 2009 22:34:34 +0000 Subject: ALSA: snd-usb-caiaq: Increase version number to 1.3.12 Indicates fixes affecting control messages and switching of input mode on Audio 8 DJ and Audio 4 DJ. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/caiaq-device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index 94610dda8ab4..5736669df2d5 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -42,7 +42,7 @@ #endif MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.11"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.12"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," -- cgit v1.2.3 From 67f7857ab12e9f8005ef988f0b667396e07622c2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 12:14:52 +0100 Subject: ALSA: hda - Add quirk for HP zenith laptop Added model=laptop for another HP laptop (103c:3072) with AD1984A codec. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index e934e2c187d0..6e348d03b716 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3890,6 +3890,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), + SND_PCI_QUIRK(0x103c, 0x3072, "HP", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), -- cgit v1.2.3 From 632da7321b7e9fa5375956280f8a0f380836c22d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:02:06 +0100 Subject: ALSA: hda - Add quirk for another HP laptop Add model=laptop entry for another HP laptop (103c:3077) with AD1984A. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 6e348d03b716..30399cbf8193 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3891,6 +3891,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3072, "HP", AD1884A_LAPTOP), + SND_PCI_QUIRK(0x103c, 0x3077, "HP", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), -- cgit v1.2.3 From e6161653094f14b1add10efe3493a2e526fe9538 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Thu, 5 Feb 2009 13:01:54 +0100 Subject: ALSA: snd_pcm_new api cleanup Impact: cleanup snd_pcm_new takes a char *id argument, although it is not modifying the string. it can therefore be declared as const char *id. Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 2 +- sound/core/pcm.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 40c5a6fa6bcd..ee0e887e49d4 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -451,7 +451,7 @@ struct snd_pcm_notify { extern const struct file_operations snd_pcm_f_ops[2]; -int snd_pcm_new(struct snd_card *card, char *id, int device, +int snd_pcm_new(struct snd_card *card, const char *id, int device, int playback_count, int capture_count, struct snd_pcm **rpcm); int snd_pcm_new_stream(struct snd_pcm *pcm, int stream, int substream_count); diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 192a433a2403..583453e2355c 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -692,7 +692,7 @@ EXPORT_SYMBOL(snd_pcm_new_stream); * * Returns zero if successful, or a negative error code on failure. */ -int snd_pcm_new(struct snd_card *card, char *id, int device, +int snd_pcm_new(struct snd_card *card, const char *id, int device, int playback_count, int capture_count, struct snd_pcm ** rpcm) { -- cgit v1.2.3 From e4967d6016b7785edafdb871e6d3e4426cb4bd1f Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Thu, 5 Feb 2009 13:10:59 +0100 Subject: ALSA: Add ALSA driver for Atmel Audio Bitstream DAC This patch adds ALSA support for the Audio Bistream DAC found on Atmel AVR32 devices. The ABDAC is an Atmel IP which might show up on AT91 devices in the future, hence making a generic driver which can be utilized by AT91 arch if needed. Datasheet describing the ABDAC peripheral is available in the AT32AP7000 datasheet, http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Tested on ATSTK1006 + ATSTK1000 with a class D amplifier stage. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Takashi Iwai --- include/sound/atmel-abdac.h | 23 ++ sound/atmel/Kconfig | 11 + sound/atmel/Makefile | 3 + sound/atmel/abdac.c | 602 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 639 insertions(+) create mode 100644 include/sound/atmel-abdac.h create mode 100644 sound/atmel/Kconfig create mode 100644 sound/atmel/Makefile create mode 100644 sound/atmel/abdac.c diff --git a/include/sound/atmel-abdac.h b/include/sound/atmel-abdac.h new file mode 100644 index 000000000000..edff6a8ba1b5 --- /dev/null +++ b/include/sound/atmel-abdac.h @@ -0,0 +1,23 @@ +/* + * Driver for the Atmel Audio Bitstream DAC (ABDAC) + * + * Copyright (C) 2009 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __INCLUDE_SOUND_ATMEL_ABDAC_H +#define __INCLUDE_SOUND_ATMEL_ABDAC_H + +#include + +/** + * struct atmel_abdac_pdata - board specific ABDAC configuration + * @dws: DMA slave interface to use for sound playback. + */ +struct atmel_abdac_pdata { + struct dw_dma_slave dws; +}; + +#endif /* __INCLUDE_SOUND_ATMEL_ABDAC_H */ diff --git a/sound/atmel/Kconfig b/sound/atmel/Kconfig new file mode 100644 index 000000000000..715318e3670f --- /dev/null +++ b/sound/atmel/Kconfig @@ -0,0 +1,11 @@ +menu "Atmel devices (AVR32 and AT91)" + depends on AVR32 || ARCH_AT91 + +config SND_ATMEL_ABDAC + tristate "Atmel Audio Bitstream DAC (ABDAC) driver" + select SND_PCM + depends on DW_DMAC && AVR32 + help + ALSA sound driver for the Atmel Audio Bitstream DAC (ABDAC). + +endmenu diff --git a/sound/atmel/Makefile b/sound/atmel/Makefile new file mode 100644 index 000000000000..c5a8213f9cb9 --- /dev/null +++ b/sound/atmel/Makefile @@ -0,0 +1,3 @@ +snd-atmel-abdac-objs := abdac.o + +obj-$(CONFIG_SND_ATMEL_ABDAC) += snd-atmel-abdac.o diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c new file mode 100644 index 000000000000..28b3c7f7cfe6 --- /dev/null +++ b/sound/atmel/abdac.c @@ -0,0 +1,602 @@ +/* + * Driver for the Atmel on-chip Audio Bitstream DAC (ABDAC) + * + * Copyright (C) 2006-2009 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* DAC register offsets */ +#define DAC_DATA 0x0000 +#define DAC_CTRL 0x0008 +#define DAC_INT_MASK 0x000c +#define DAC_INT_EN 0x0010 +#define DAC_INT_DIS 0x0014 +#define DAC_INT_CLR 0x0018 +#define DAC_INT_STATUS 0x001c + +/* Bitfields in CTRL */ +#define DAC_SWAP_OFFSET 30 +#define DAC_SWAP_SIZE 1 +#define DAC_EN_OFFSET 31 +#define DAC_EN_SIZE 1 + +/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */ +#define DAC_UNDERRUN_OFFSET 28 +#define DAC_UNDERRUN_SIZE 1 +#define DAC_TX_READY_OFFSET 29 +#define DAC_TX_READY_SIZE 1 + +/* Bit manipulation macros */ +#define DAC_BIT(name) \ + (1 << DAC_##name##_OFFSET) +#define DAC_BF(name, value) \ + (((value) & ((1 << DAC_##name##_SIZE) - 1)) \ + << DAC_##name##_OFFSET) +#define DAC_BFEXT(name, value) \ + (((value) >> DAC_##name##_OFFSET) \ + & ((1 << DAC_##name##_SIZE) - 1)) +#define DAC_BFINS(name, value, old) \ + (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \ + << DAC_##name##_OFFSET)) \ + | DAC_BF(name, value)) + +/* Register access macros */ +#define dac_readl(port, reg) \ + __raw_readl((port)->regs + DAC_##reg) +#define dac_writel(port, reg, value) \ + __raw_writel((value), (port)->regs + DAC_##reg) + +/* + * ABDAC supports a maximum of 6 different rates from a generic clock. The + * generic clock has a power of two divider, which gives 6 steps from 192 kHz + * to 5112 Hz. + */ +#define MAX_NUM_RATES 6 +/* ALSA seems to use rates between 192000 Hz and 5112 Hz. */ +#define RATE_MAX 192000 +#define RATE_MIN 5112 + +enum { + DMA_READY = 0, +}; + +struct atmel_abdac_dma { + struct dma_chan *chan; + struct dw_cyclic_desc *cdesc; +}; + +struct atmel_abdac { + struct clk *pclk; + struct clk *sample_clk; + struct platform_device *pdev; + struct atmel_abdac_dma dma; + + struct snd_pcm_hw_constraint_list constraints_rates; + struct snd_pcm_substream *substream; + struct snd_card *card; + struct snd_pcm *pcm; + + void __iomem *regs; + unsigned long flags; + unsigned int rates[MAX_NUM_RATES]; + unsigned int rates_num; + int irq; +}; + +#define get_dac(card) ((struct atmel_abdac *)(card)->private_data) + +/* This function is called by the DMA driver. */ +static void atmel_abdac_dma_period_done(void *arg) +{ + struct atmel_abdac *dac = arg; + snd_pcm_period_elapsed(dac->substream); +} + +static int atmel_abdac_prepare_dma(struct atmel_abdac *dac, + struct snd_pcm_substream *substream, + enum dma_data_direction direction) +{ + struct dma_chan *chan = dac->dma.chan; + struct dw_cyclic_desc *cdesc; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long buffer_len, period_len; + + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-halfword-aligned buffers or lengths. + */ + if (runtime->dma_addr & 1 || runtime->buffer_size & 1) { + dev_dbg(&dac->pdev->dev, "too complex transfer\n"); + return -EINVAL; + } + + buffer_len = frames_to_bytes(runtime, runtime->buffer_size); + period_len = frames_to_bytes(runtime, runtime->period_size); + + cdesc = dw_dma_cyclic_prep(chan, runtime->dma_addr, buffer_len, + period_len, DMA_TO_DEVICE); + if (IS_ERR(cdesc)) { + dev_dbg(&dac->pdev->dev, "could not prepare cyclic DMA\n"); + return PTR_ERR(cdesc); + } + + cdesc->period_callback = atmel_abdac_dma_period_done; + cdesc->period_callback_param = dac; + + dac->dma.cdesc = cdesc; + + set_bit(DMA_READY, &dac->flags); + + return 0; +} + +static struct snd_pcm_hardware atmel_abdac_hw = { + .info = (SNDRV_PCM_INFO_MMAP + | SNDRV_PCM_INFO_MMAP_VALID + | SNDRV_PCM_INFO_INTERLEAVED + | SNDRV_PCM_INFO_BLOCK_TRANSFER + | SNDRV_PCM_INFO_RESUME + | SNDRV_PCM_INFO_PAUSE), + .formats = (SNDRV_PCM_FMTBIT_S16_BE), + .rates = (SNDRV_PCM_RATE_KNOT), + .rate_min = RATE_MIN, + .rate_max = RATE_MAX, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 64 * 4096, + .period_bytes_min = 4096, + .period_bytes_max = 4096, + .periods_min = 4, + .periods_max = 64, +}; + +static int atmel_abdac_open(struct snd_pcm_substream *substream) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + + dac->substream = substream; + atmel_abdac_hw.rate_max = dac->rates[dac->rates_num - 1]; + atmel_abdac_hw.rate_min = dac->rates[0]; + substream->runtime->hw = atmel_abdac_hw; + + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, &dac->constraints_rates); +} + +static int atmel_abdac_close(struct snd_pcm_substream *substream) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + dac->substream = NULL; + return 0; +} + +static int atmel_abdac_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + int retval; + + retval = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (retval < 0) + return retval; + /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ + if (retval == 1) + if (test_and_clear_bit(DMA_READY, &dac->flags)) + dw_dma_cyclic_free(dac->dma.chan); + + return retval; +} + +static int atmel_abdac_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + if (test_and_clear_bit(DMA_READY, &dac->flags)) + dw_dma_cyclic_free(dac->dma.chan); + return snd_pcm_lib_free_pages(substream); +} + +static int atmel_abdac_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + int retval; + + retval = clk_set_rate(dac->sample_clk, 256 * substream->runtime->rate); + if (retval) + return retval; + + if (!test_bit(DMA_READY, &dac->flags)) + retval = atmel_abdac_prepare_dma(dac, substream, DMA_TO_DEVICE); + + return retval; +} + +static int atmel_abdac_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + int retval = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */ + case SNDRV_PCM_TRIGGER_RESUME: /* fall through */ + case SNDRV_PCM_TRIGGER_START: + clk_enable(dac->sample_clk); + retval = dw_dma_cyclic_start(dac->dma.chan); + if (retval) + goto out; + dac_writel(dac, CTRL, DAC_BIT(EN)); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */ + case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */ + case SNDRV_PCM_TRIGGER_STOP: + dw_dma_cyclic_stop(dac->dma.chan); + dac_writel(dac, DATA, 0); + dac_writel(dac, CTRL, 0); + clk_disable(dac->sample_clk); + break; + default: + retval = -EINVAL; + break; + } +out: + return retval; +} + +static snd_pcm_uframes_t +atmel_abdac_pointer(struct snd_pcm_substream *substream) +{ + struct atmel_abdac *dac = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + snd_pcm_uframes_t frames; + unsigned long bytes; + + bytes = dw_dma_get_src_addr(dac->dma.chan); + bytes -= runtime->dma_addr; + + frames = bytes_to_frames(runtime, bytes); + if (frames >= runtime->buffer_size) + frames -= runtime->buffer_size; + + return frames; +} + +static irqreturn_t abdac_interrupt(int irq, void *dev_id) +{ + struct atmel_abdac *dac = dev_id; + u32 status; + + status = dac_readl(dac, INT_STATUS); + if (status & DAC_BIT(UNDERRUN)) { + dev_err(&dac->pdev->dev, "underrun detected\n"); + dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN)); + } else { + dev_err(&dac->pdev->dev, "spurious interrupt (status=0x%x)\n", + status); + dac_writel(dac, INT_CLR, status); + } + + return IRQ_HANDLED; +} + +static struct snd_pcm_ops atmel_abdac_ops = { + .open = atmel_abdac_open, + .close = atmel_abdac_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_abdac_hw_params, + .hw_free = atmel_abdac_hw_free, + .prepare = atmel_abdac_prepare, + .trigger = atmel_abdac_trigger, + .pointer = atmel_abdac_pointer, +}; + +static int __devinit atmel_abdac_pcm_new(struct atmel_abdac *dac) +{ + struct snd_pcm_hardware hw = atmel_abdac_hw; + struct snd_pcm *pcm; + int retval; + + retval = snd_pcm_new(dac->card, dac->card->shortname, + dac->pdev->id, 1, 0, &pcm); + if (retval) + return retval; + + strcpy(pcm->name, dac->card->shortname); + pcm->private_data = dac; + pcm->info_flags = 0; + dac->pcm = pcm; + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &atmel_abdac_ops); + + retval = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, + &dac->pdev->dev, hw.periods_min * hw.period_bytes_min, + hw.buffer_bytes_max); + + return retval; +} + +static bool filter(struct dma_chan *chan, void *slave) +{ + struct dw_dma_slave *dws = slave; + + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; + return true; + } else + return false; +} + +static int set_sample_rates(struct atmel_abdac *dac) +{ + long new_rate = RATE_MAX; + int retval = -EINVAL; + int index = 0; + + /* we start at 192 kHz and work our way down to 5112 Hz */ + while (new_rate >= RATE_MIN && index < (MAX_NUM_RATES + 1)) { + new_rate = clk_round_rate(dac->sample_clk, 256 * new_rate); + if (new_rate < 0) + break; + /* make sure we are below the ABDAC clock */ + if (new_rate <= clk_get_rate(dac->pclk)) { + dac->rates[index] = new_rate / 256; + index++; + } + /* divide by 256 and then by two to get next rate */ + new_rate /= 256 * 2; + } + + if (index) { + int i; + + /* reverse array, smallest go first */ + for (i = 0; i < (index / 2); i++) { + unsigned int tmp = dac->rates[index - 1 - i]; + dac->rates[index - 1 - i] = dac->rates[i]; + dac->rates[i] = tmp; + } + + dac->constraints_rates.count = index; + dac->constraints_rates.list = dac->rates; + dac->constraints_rates.mask = 0; + dac->rates_num = index; + + retval = 0; + } + + return retval; +} + +static int __devinit atmel_abdac_probe(struct platform_device *pdev) +{ + struct snd_card *card; + struct atmel_abdac *dac; + struct resource *regs; + struct atmel_abdac_pdata *pdata; + struct clk *pclk; + struct clk *sample_clk; + int retval; + int irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_dbg(&pdev->dev, "no memory resource\n"); + return -ENXIO; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_dbg(&pdev->dev, "could not get IRQ number\n"); + return irq; + } + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_dbg(&pdev->dev, "no platform data\n"); + return -ENXIO; + } + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) { + dev_dbg(&pdev->dev, "no peripheral clock\n"); + return PTR_ERR(pclk); + } + sample_clk = clk_get(&pdev->dev, "sample_clk"); + if (IS_ERR(pclk)) { + dev_dbg(&pdev->dev, "no sample clock\n"); + retval = PTR_ERR(pclk); + goto out_put_pclk; + } + clk_enable(pclk); + + retval = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, sizeof(struct atmel_abdac), &card); + if (retval) { + dev_dbg(&pdev->dev, "could not create sound card device\n"); + goto out_put_sample_clk; + } + + dac = get_dac(card); + + dac->irq = irq; + dac->card = card; + dac->pclk = pclk; + dac->sample_clk = sample_clk; + dac->pdev = pdev; + + retval = set_sample_rates(dac); + if (retval < 0) { + dev_dbg(&pdev->dev, "could not set supported rates\n"); + goto out_free_card; + } + + dac->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!dac->regs) { + dev_dbg(&pdev->dev, "could not remap register memory\n"); + goto out_free_card; + } + + /* make sure the DAC is silent and disabled */ + dac_writel(dac, DATA, 0); + dac_writel(dac, CTRL, 0); + + retval = request_irq(irq, abdac_interrupt, 0, "abdac", dac); + if (retval) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto out_unmap_regs; + } + + snd_card_set_dev(card, &pdev->dev); + + if (pdata->dws.dma_dev) { + struct dw_dma_slave *dws = &pdata->dws; + dma_cap_mask_t mask; + + dws->tx_reg = regs->start + DAC_DATA; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + dac->dma.chan = dma_request_channel(mask, filter, dws); + } + if (!pdata->dws.dma_dev || !dac->dma.chan) { + dev_dbg(&pdev->dev, "DMA not available\n"); + retval = -ENODEV; + goto out_unset_card_dev; + } + + strcpy(card->driver, "Atmel ABDAC"); + strcpy(card->shortname, "Atmel ABDAC"); + sprintf(card->longname, "Atmel Audio Bitstream DAC"); + + retval = atmel_abdac_pcm_new(dac); + if (retval) { + dev_dbg(&pdev->dev, "could not register ABDAC pcm device\n"); + goto out_release_dma; + } + + retval = snd_card_register(card); + if (retval) { + dev_dbg(&pdev->dev, "could not register sound card\n"); + goto out_release_dma; + } + + platform_set_drvdata(pdev, card); + + dev_info(&pdev->dev, "Atmel ABDAC at 0x%p using %s\n", + dac->regs, dac->dma.chan->dev->device.bus_id); + + return retval; + +out_release_dma: + dma_release_channel(dac->dma.chan); + dac->dma.chan = NULL; +out_unset_card_dev: + snd_card_set_dev(card, NULL); + free_irq(irq, dac); +out_unmap_regs: + iounmap(dac->regs); +out_free_card: + snd_card_free(card); +out_put_sample_clk: + clk_put(sample_clk); + clk_disable(pclk); +out_put_pclk: + clk_put(pclk); + return retval; +} + +#ifdef CONFIG_PM +static int atmel_abdac_suspend(struct platform_device *pdev, pm_message_t msg) +{ + struct snd_card *card = platform_get_drvdata(pdev); + struct atmel_abdac *dac = card->private_data; + + dw_dma_cyclic_stop(dac->dma.chan); + clk_disable(dac->sample_clk); + clk_disable(dac->pclk); + + return 0; +} + +static int atmel_abdac_resume(struct platform_device *pdev) +{ + struct snd_card *card = platform_get_drvdata(pdev); + struct atmel_abdac *dac = card->private_data; + + clk_enable(dac->pclk); + clk_enable(dac->sample_clk); + if (test_bit(DMA_READY, &dac->flags)) + dw_dma_cyclic_start(dac->dma.chan); + + return 0; +} +#else +#define atmel_abdac_suspend NULL +#define atmel_abdac_resume NULL +#endif + +static int __devexit atmel_abdac_remove(struct platform_device *pdev) +{ + struct snd_card *card = platform_get_drvdata(pdev); + struct atmel_abdac *dac = get_dac(card); + + clk_put(dac->sample_clk); + clk_disable(dac->pclk); + clk_put(dac->pclk); + + dma_release_channel(dac->dma.chan); + dac->dma.chan = NULL; + snd_card_set_dev(card, NULL); + iounmap(dac->regs); + free_irq(dac->irq, dac); + snd_card_free(card); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver atmel_abdac_driver = { + .remove = __devexit_p(atmel_abdac_remove), + .driver = { + .name = "atmel_abdac", + }, + .suspend = atmel_abdac_suspend, + .resume = atmel_abdac_resume, +}; + +static int __init atmel_abdac_init(void) +{ + return platform_driver_probe(&atmel_abdac_driver, + atmel_abdac_probe); +} +module_init(atmel_abdac_init); + +static void __exit atmel_abdac_exit(void) +{ + platform_driver_unregister(&atmel_abdac_driver); +} +module_exit(atmel_abdac_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)"); +MODULE_AUTHOR("Hans-Christian Egtvedt "); -- cgit v1.2.3 From 4ede028f8716523fc31e0d3d01b81405613dfb8f Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Thu, 5 Feb 2009 13:11:00 +0100 Subject: ALSA: Add ALSA driver for Atmel AC97 controller This patch adds ALSA support for the AC97 controller found on Atmel AVR32 devices. Tested on ATSTK1006 + ATSTK1000 with a development board with a AC97 codec. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Takashi Iwai --- include/sound/atmel-ac97c.h | 40 ++ sound/atmel/Kconfig | 8 + sound/atmel/Makefile | 2 + sound/atmel/ac97c.c | 932 ++++++++++++++++++++++++++++++++++++++++++++ sound/atmel/ac97c.h | 71 ++++ 5 files changed, 1053 insertions(+) create mode 100644 include/sound/atmel-ac97c.h create mode 100644 sound/atmel/ac97c.c create mode 100644 sound/atmel/ac97c.h diff --git a/include/sound/atmel-ac97c.h b/include/sound/atmel-ac97c.h new file mode 100644 index 000000000000..e6aabdb45865 --- /dev/null +++ b/include/sound/atmel-ac97c.h @@ -0,0 +1,40 @@ +/* + * Driver for the Atmel AC97C controller + * + * Copyright (C) 2005-2009 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __INCLUDE_SOUND_ATMEL_AC97C_H +#define __INCLUDE_SOUND_ATMEL_AC97C_H + +#include + +#define AC97C_CAPTURE 0x01 +#define AC97C_PLAYBACK 0x02 +#define AC97C_BOTH (AC97C_CAPTURE | AC97C_PLAYBACK) + +/** + * struct atmel_ac97c_pdata - board specific AC97C configuration + * @rx_dws: DMA slave interface to use for sound capture. + * @tx_dws: DMA slave interface to use for sound playback. + * @reset_pin: GPIO pin wired to the reset input on the external AC97 codec, + * optional to use, set to -ENODEV if not in use. AC97 layer will + * try to do a software reset of the external codec anyway. + * @flags: Flags for which directions should be enabled. + * + * If the user do not want to use a DMA channel for playback or capture, i.e. + * only one feature is required on the board. The slave for playback or capture + * can be set to NULL. The AC97C driver will take use of this when setting up + * the sound streams. + */ +struct ac97c_platform_data { + struct dw_dma_slave rx_dws; + struct dw_dma_slave tx_dws; + unsigned int flags; + int reset_pin; +}; + +#endif /* __INCLUDE_SOUND_ATMEL_AC97C_H */ diff --git a/sound/atmel/Kconfig b/sound/atmel/Kconfig index 715318e3670f..6c228a91940d 100644 --- a/sound/atmel/Kconfig +++ b/sound/atmel/Kconfig @@ -8,4 +8,12 @@ config SND_ATMEL_ABDAC help ALSA sound driver for the Atmel Audio Bitstream DAC (ABDAC). +config SND_ATMEL_AC97C + tristate "Atmel AC97 Controller (AC97C) driver" + select SND_PCM + select SND_AC97_CODEC + depends on DW_DMAC && AVR32 + help + ALSA sound driver for the Atmel AC97 controller. + endmenu diff --git a/sound/atmel/Makefile b/sound/atmel/Makefile index c5a8213f9cb9..219dcfac6086 100644 --- a/sound/atmel/Makefile +++ b/sound/atmel/Makefile @@ -1,3 +1,5 @@ snd-atmel-abdac-objs := abdac.o +snd-atmel-ac97c-objs := ac97c.o obj-$(CONFIG_SND_ATMEL_ABDAC) += snd-atmel-abdac.o +obj-$(CONFIG_SND_ATMEL_AC97C) += snd-atmel-ac97c.o diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c new file mode 100644 index 000000000000..dd72e00e5ae1 --- /dev/null +++ b/sound/atmel/ac97c.c @@ -0,0 +1,932 @@ +/* + * Driver for the Atmel AC97C controller + * + * Copyright (C) 2005-2009 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ac97c.h" + +enum { + DMA_TX_READY = 0, + DMA_RX_READY, + DMA_TX_CHAN_PRESENT, + DMA_RX_CHAN_PRESENT, +}; + +/* Serialize access to opened variable */ +static DEFINE_MUTEX(opened_mutex); + +struct atmel_ac97c_dma { + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; +}; + +struct atmel_ac97c { + struct clk *pclk; + struct platform_device *pdev; + struct atmel_ac97c_dma dma; + + struct snd_pcm_substream *playback_substream; + struct snd_pcm_substream *capture_substream; + struct snd_card *card; + struct snd_pcm *pcm; + struct snd_ac97 *ac97; + struct snd_ac97_bus *ac97_bus; + + u64 cur_format; + unsigned int cur_rate; + unsigned long flags; + /* Serialize access to opened variable */ + spinlock_t lock; + void __iomem *regs; + int opened; + int reset_pin; +}; + +#define get_chip(card) ((struct atmel_ac97c *)(card)->private_data) + +#define ac97c_writel(chip, reg, val) \ + __raw_writel((val), (chip)->regs + AC97C_##reg) +#define ac97c_readl(chip, reg) \ + __raw_readl((chip)->regs + AC97C_##reg) + +/* This function is called by the DMA driver. */ +static void atmel_ac97c_dma_playback_period_done(void *arg) +{ + struct atmel_ac97c *chip = arg; + snd_pcm_period_elapsed(chip->playback_substream); +} + +static void atmel_ac97c_dma_capture_period_done(void *arg) +{ + struct atmel_ac97c *chip = arg; + snd_pcm_period_elapsed(chip->capture_substream); +} + +static int atmel_ac97c_prepare_dma(struct atmel_ac97c *chip, + struct snd_pcm_substream *substream, + enum dma_data_direction direction) +{ + struct dma_chan *chan; + struct dw_cyclic_desc *cdesc; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long buffer_len, period_len; + + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-halfword-aligned buffers or lengths. + */ + if (runtime->dma_addr & 1 || runtime->buffer_size & 1) { + dev_dbg(&chip->pdev->dev, "too complex transfer\n"); + return -EINVAL; + } + + if (direction == DMA_TO_DEVICE) + chan = chip->dma.tx_chan; + else + chan = chip->dma.rx_chan; + + buffer_len = frames_to_bytes(runtime, runtime->buffer_size); + period_len = frames_to_bytes(runtime, runtime->period_size); + + cdesc = dw_dma_cyclic_prep(chan, runtime->dma_addr, buffer_len, + period_len, direction); + if (IS_ERR(cdesc)) { + dev_dbg(&chip->pdev->dev, "could not prepare cyclic DMA\n"); + return PTR_ERR(cdesc); + } + + if (direction == DMA_TO_DEVICE) { + cdesc->period_callback = atmel_ac97c_dma_playback_period_done; + set_bit(DMA_TX_READY, &chip->flags); + } else { + cdesc->period_callback = atmel_ac97c_dma_capture_period_done; + set_bit(DMA_RX_READY, &chip->flags); + } + + cdesc->period_callback_param = chip; + + return 0; +} + +static struct snd_pcm_hardware atmel_ac97c_hw = { + .info = (SNDRV_PCM_INFO_MMAP + | SNDRV_PCM_INFO_MMAP_VALID + | SNDRV_PCM_INFO_INTERLEAVED + | SNDRV_PCM_INFO_BLOCK_TRANSFER + | SNDRV_PCM_INFO_JOINT_DUPLEX + | SNDRV_PCM_INFO_RESUME + | SNDRV_PCM_INFO_PAUSE), + .formats = (SNDRV_PCM_FMTBIT_S16_BE + | SNDRV_PCM_FMTBIT_S16_LE), + .rates = (SNDRV_PCM_RATE_CONTINUOUS), + .rate_min = 4000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = 64 * 4096, + .period_bytes_min = 4096, + .period_bytes_max = 4096, + .periods_min = 4, + .periods_max = 64, +}; + +static int atmel_ac97c_playback_open(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + mutex_lock(&opened_mutex); + chip->opened++; + runtime->hw = atmel_ac97c_hw; + if (chip->cur_rate) { + runtime->hw.rate_min = chip->cur_rate; + runtime->hw.rate_max = chip->cur_rate; + } + if (chip->cur_format) + runtime->hw.formats = (1ULL << chip->cur_format); + mutex_unlock(&opened_mutex); + chip->playback_substream = substream; + return 0; +} + +static int atmel_ac97c_capture_open(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + mutex_lock(&opened_mutex); + chip->opened++; + runtime->hw = atmel_ac97c_hw; + if (chip->cur_rate) { + runtime->hw.rate_min = chip->cur_rate; + runtime->hw.rate_max = chip->cur_rate; + } + if (chip->cur_format) + runtime->hw.formats = (1ULL << chip->cur_format); + mutex_unlock(&opened_mutex); + chip->capture_substream = substream; + return 0; +} + +static int atmel_ac97c_playback_close(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + + mutex_lock(&opened_mutex); + chip->opened--; + if (!chip->opened) { + chip->cur_rate = 0; + chip->cur_format = 0; + } + mutex_unlock(&opened_mutex); + + chip->playback_substream = NULL; + + return 0; +} + +static int atmel_ac97c_capture_close(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + + mutex_lock(&opened_mutex); + chip->opened--; + if (!chip->opened) { + chip->cur_rate = 0; + chip->cur_format = 0; + } + mutex_unlock(&opened_mutex); + + chip->capture_substream = NULL; + + return 0; +} + +static int atmel_ac97c_playback_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + int retval; + + retval = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (retval < 0) + return retval; + /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ + if (retval == 1) + if (test_and_clear_bit(DMA_TX_READY, &chip->flags)) + dw_dma_cyclic_free(chip->dma.tx_chan); + + /* Set restrictions to params. */ + mutex_lock(&opened_mutex); + chip->cur_rate = params_rate(hw_params); + chip->cur_format = params_format(hw_params); + mutex_unlock(&opened_mutex); + + return retval; +} + +static int atmel_ac97c_capture_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + int retval; + + retval = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (retval < 0) + return retval; + /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ + if (retval == 1) + if (test_and_clear_bit(DMA_RX_READY, &chip->flags)) + dw_dma_cyclic_free(chip->dma.rx_chan); + + /* Set restrictions to params. */ + mutex_lock(&opened_mutex); + chip->cur_rate = params_rate(hw_params); + chip->cur_format = params_format(hw_params); + mutex_unlock(&opened_mutex); + + return retval; +} + +static int atmel_ac97c_playback_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + if (test_and_clear_bit(DMA_TX_READY, &chip->flags)) + dw_dma_cyclic_free(chip->dma.tx_chan); + return snd_pcm_lib_free_pages(substream); +} + +static int atmel_ac97c_capture_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + if (test_and_clear_bit(DMA_RX_READY, &chip->flags)) + dw_dma_cyclic_free(chip->dma.rx_chan); + return snd_pcm_lib_free_pages(substream); +} + +static int atmel_ac97c_playback_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long word = 0; + int retval; + + /* assign channels to AC97C channel A */ + switch (runtime->channels) { + case 1: + word |= AC97C_CH_ASSIGN(PCM_LEFT, A); + break; + case 2: + word |= AC97C_CH_ASSIGN(PCM_LEFT, A) + | AC97C_CH_ASSIGN(PCM_RIGHT, A); + break; + default: + /* TODO: support more than two channels */ + return -EINVAL; + break; + } + ac97c_writel(chip, OCA, word); + + /* configure sample format and size */ + word = AC97C_CMR_DMAEN | AC97C_CMR_SIZE_16; + + switch (runtime->format) { + case SNDRV_PCM_FORMAT_S16_LE: + word |= AC97C_CMR_CEM_LITTLE; + break; + case SNDRV_PCM_FORMAT_S16_BE: /* fall through */ + default: + word &= ~(AC97C_CMR_CEM_LITTLE); + break; + } + + ac97c_writel(chip, CAMR, word); + + /* set variable rate if needed */ + if (runtime->rate != 48000) { + word = ac97c_readl(chip, MR); + word |= AC97C_MR_VRA; + ac97c_writel(chip, MR, word); + } else { + word = ac97c_readl(chip, MR); + word &= ~(AC97C_MR_VRA); + ac97c_writel(chip, MR, word); + } + + retval = snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, + runtime->rate); + if (retval) + dev_dbg(&chip->pdev->dev, "could not set rate %d Hz\n", + runtime->rate); + + if (!test_bit(DMA_TX_READY, &chip->flags)) + retval = atmel_ac97c_prepare_dma(chip, substream, + DMA_TO_DEVICE); + + return retval; +} + +static int atmel_ac97c_capture_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long word = 0; + int retval; + + /* assign channels to AC97C channel A */ + switch (runtime->channels) { + case 1: + word |= AC97C_CH_ASSIGN(PCM_LEFT, A); + break; + case 2: + word |= AC97C_CH_ASSIGN(PCM_LEFT, A) + | AC97C_CH_ASSIGN(PCM_RIGHT, A); + break; + default: + /* TODO: support more than two channels */ + return -EINVAL; + break; + } + ac97c_writel(chip, ICA, word); + + /* configure sample format and size */ + word = AC97C_CMR_DMAEN | AC97C_CMR_SIZE_16; + + switch (runtime->format) { + case SNDRV_PCM_FORMAT_S16_LE: + word |= AC97C_CMR_CEM_LITTLE; + break; + case SNDRV_PCM_FORMAT_S16_BE: /* fall through */ + default: + word &= ~(AC97C_CMR_CEM_LITTLE); + break; + } + + ac97c_writel(chip, CAMR, word); + + /* set variable rate if needed */ + if (runtime->rate != 48000) { + word = ac97c_readl(chip, MR); + word |= AC97C_MR_VRA; + ac97c_writel(chip, MR, word); + } else { + word = ac97c_readl(chip, MR); + word &= ~(AC97C_MR_VRA); + ac97c_writel(chip, MR, word); + } + + retval = snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, + runtime->rate); + if (retval) + dev_dbg(&chip->pdev->dev, "could not set rate %d Hz\n", + runtime->rate); + + if (!test_bit(DMA_RX_READY, &chip->flags)) + retval = atmel_ac97c_prepare_dma(chip, substream, + DMA_FROM_DEVICE); + + return retval; +} + +static int +atmel_ac97c_playback_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + unsigned long camr; + int retval = 0; + + camr = ac97c_readl(chip, CAMR); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */ + case SNDRV_PCM_TRIGGER_RESUME: /* fall through */ + case SNDRV_PCM_TRIGGER_START: + retval = dw_dma_cyclic_start(chip->dma.tx_chan); + if (retval) + goto out; + camr |= AC97C_CMR_CENA; + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */ + case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */ + case SNDRV_PCM_TRIGGER_STOP: + dw_dma_cyclic_stop(chip->dma.tx_chan); + if (chip->opened <= 1) + camr &= ~AC97C_CMR_CENA; + break; + default: + retval = -EINVAL; + goto out; + } + + ac97c_writel(chip, CAMR, camr); +out: + return retval; +} + +static int +atmel_ac97c_capture_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + unsigned long camr; + int retval = 0; + + camr = ac97c_readl(chip, CAMR); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */ + case SNDRV_PCM_TRIGGER_RESUME: /* fall through */ + case SNDRV_PCM_TRIGGER_START: + retval = dw_dma_cyclic_start(chip->dma.rx_chan); + if (retval) + goto out; + camr |= AC97C_CMR_CENA; + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */ + case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */ + case SNDRV_PCM_TRIGGER_STOP: + dw_dma_cyclic_stop(chip->dma.rx_chan); + if (chip->opened <= 1) + camr &= ~AC97C_CMR_CENA; + break; + default: + retval = -EINVAL; + break; + } + + ac97c_writel(chip, CAMR, camr); +out: + return retval; +} + +static snd_pcm_uframes_t +atmel_ac97c_playback_pointer(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + snd_pcm_uframes_t frames; + unsigned long bytes; + + bytes = dw_dma_get_src_addr(chip->dma.tx_chan); + bytes -= runtime->dma_addr; + + frames = bytes_to_frames(runtime, bytes); + if (frames >= runtime->buffer_size) + frames -= runtime->buffer_size; + return frames; +} + +static snd_pcm_uframes_t +atmel_ac97c_capture_pointer(struct snd_pcm_substream *substream) +{ + struct atmel_ac97c *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + snd_pcm_uframes_t frames; + unsigned long bytes; + + bytes = dw_dma_get_dst_addr(chip->dma.rx_chan); + bytes -= runtime->dma_addr; + + frames = bytes_to_frames(runtime, bytes); + if (frames >= runtime->buffer_size) + frames -= runtime->buffer_size; + return frames; +} + +static struct snd_pcm_ops atmel_ac97_playback_ops = { + .open = atmel_ac97c_playback_open, + .close = atmel_ac97c_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_ac97c_playback_hw_params, + .hw_free = atmel_ac97c_playback_hw_free, + .prepare = atmel_ac97c_playback_prepare, + .trigger = atmel_ac97c_playback_trigger, + .pointer = atmel_ac97c_playback_pointer, +}; + +static struct snd_pcm_ops atmel_ac97_capture_ops = { + .open = atmel_ac97c_capture_open, + .close = atmel_ac97c_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_ac97c_capture_hw_params, + .hw_free = atmel_ac97c_capture_hw_free, + .prepare = atmel_ac97c_capture_prepare, + .trigger = atmel_ac97c_capture_trigger, + .pointer = atmel_ac97c_capture_pointer, +}; + +static int __devinit atmel_ac97c_pcm_new(struct atmel_ac97c *chip) +{ + struct snd_pcm *pcm; + struct snd_pcm_hardware hw = atmel_ac97c_hw; + int capture, playback, retval; + + capture = test_bit(DMA_RX_CHAN_PRESENT, &chip->flags); + playback = test_bit(DMA_TX_CHAN_PRESENT, &chip->flags); + + retval = snd_pcm_new(chip->card, chip->card->shortname, + chip->pdev->id, playback, capture, &pcm); + if (retval) + return retval; + + if (capture) + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, + &atmel_ac97_capture_ops); + if (playback) + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, + &atmel_ac97_playback_ops); + + retval = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, + &chip->pdev->dev, hw.periods_min * hw.period_bytes_min, + hw.buffer_bytes_max); + if (retval) + return retval; + + pcm->private_data = chip; + pcm->info_flags = 0; + strcpy(pcm->name, chip->card->shortname); + chip->pcm = pcm; + + return 0; +} + +static int atmel_ac97c_mixer_new(struct atmel_ac97c *chip) +{ + struct snd_ac97_template template; + memset(&template, 0, sizeof(template)); + template.private_data = chip; + return snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97); +} + +static void atmel_ac97c_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + struct atmel_ac97c *chip = get_chip(ac97); + unsigned long word; + int timeout = 40; + + word = (reg & 0x7f) << 16 | val; + + do { + if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) { + ac97c_writel(chip, COTHR, word); + return; + } + udelay(1); + } while (--timeout); + + dev_dbg(&chip->pdev->dev, "codec write timeout\n"); +} + +static unsigned short atmel_ac97c_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + struct atmel_ac97c *chip = get_chip(ac97); + unsigned long word; + int timeout = 40; + int write = 10; + + word = (0x80 | (reg & 0x7f)) << 16; + + if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) + ac97c_readl(chip, CORHR); + +retry_write: + timeout = 40; + + do { + if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) { + ac97c_writel(chip, COTHR, word); + goto read_reg; + } + udelay(10); + } while (--timeout); + + if (!--write) + goto timed_out; + goto retry_write; + +read_reg: + do { + if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) { + unsigned short val = ac97c_readl(chip, CORHR); + return val; + } + udelay(10); + } while (--timeout); + + if (!--write) + goto timed_out; + goto retry_write; + +timed_out: + dev_dbg(&chip->pdev->dev, "codec read timeout\n"); + return 0xffff; +} + +static bool filter(struct dma_chan *chan, void *slave) +{ + struct dw_dma_slave *dws = slave; + + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; + return true; + } else + return false; +} + +static void atmel_ac97c_reset(struct atmel_ac97c *chip) +{ + ac97c_writel(chip, MR, AC97C_MR_WRST); + + if (gpio_is_valid(chip->reset_pin)) { + gpio_set_value(chip->reset_pin, 0); + /* AC97 v2.2 specifications says minimum 1 us. */ + udelay(10); + gpio_set_value(chip->reset_pin, 1); + } + + udelay(1); + ac97c_writel(chip, MR, AC97C_MR_ENA); +} + +static int __devinit atmel_ac97c_probe(struct platform_device *pdev) +{ + struct snd_card *card; + struct atmel_ac97c *chip; + struct resource *regs; + struct ac97c_platform_data *pdata; + struct clk *pclk; + static struct snd_ac97_bus_ops ops = { + .write = atmel_ac97c_write, + .read = atmel_ac97c_read, + }; + int retval; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_dbg(&pdev->dev, "no memory resource\n"); + return -ENXIO; + } + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_dbg(&pdev->dev, "no platform data\n"); + return -ENXIO; + } + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) { + dev_dbg(&pdev->dev, "no peripheral clock\n"); + return PTR_ERR(pclk); + } + clk_enable(pclk); + + retval = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, sizeof(struct atmel_ac97c), &card); + if (retval) { + dev_dbg(&pdev->dev, "could not create sound card device\n"); + goto err_snd_card_new; + } + + chip = get_chip(card); + + spin_lock_init(&chip->lock); + + strcpy(card->driver, "Atmel AC97C"); + strcpy(card->shortname, "Atmel AC97C"); + sprintf(card->longname, "Atmel AC97 controller"); + + chip->card = card; + chip->pclk = pclk; + chip->pdev = pdev; + chip->regs = ioremap(regs->start, regs->end - regs->start + 1); + + if (!chip->regs) { + dev_dbg(&pdev->dev, "could not remap register memory\n"); + goto err_ioremap; + } + + if (gpio_is_valid(pdata->reset_pin)) { + if (gpio_request(pdata->reset_pin, "reset_pin")) { + dev_dbg(&pdev->dev, "reset pin not available\n"); + chip->reset_pin = -ENODEV; + } else { + gpio_direction_output(pdata->reset_pin, 1); + chip->reset_pin = pdata->reset_pin; + } + } + + snd_card_set_dev(card, &pdev->dev); + + retval = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus); + if (retval) { + dev_dbg(&pdev->dev, "could not register on ac97 bus\n"); + goto err_ac97_bus; + } + + atmel_ac97c_reset(chip); + + retval = atmel_ac97c_mixer_new(chip); + if (retval) { + dev_dbg(&pdev->dev, "could not register ac97 mixer\n"); + goto err_ac97_bus; + } + + if (pdata->rx_dws.dma_dev) { + struct dw_dma_slave *dws = &pdata->rx_dws; + dma_cap_mask_t mask; + + dws->rx_reg = regs->start + AC97C_CARHR + 2; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chip->dma.rx_chan = dma_request_channel(mask, filter, dws); + + dev_info(&chip->pdev->dev, "using %s for DMA RX\n", + chip->dma.rx_chan->dev->device.bus_id); + set_bit(DMA_RX_CHAN_PRESENT, &chip->flags); + } + + if (pdata->tx_dws.dma_dev) { + struct dw_dma_slave *dws = &pdata->tx_dws; + dma_cap_mask_t mask; + + dws->tx_reg = regs->start + AC97C_CATHR + 2; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chip->dma.tx_chan = dma_request_channel(mask, filter, dws); + + dev_info(&chip->pdev->dev, "using %s for DMA TX\n", + chip->dma.tx_chan->dev->device.bus_id); + set_bit(DMA_TX_CHAN_PRESENT, &chip->flags); + } + + if (!test_bit(DMA_RX_CHAN_PRESENT, &chip->flags) && + !test_bit(DMA_TX_CHAN_PRESENT, &chip->flags)) { + dev_dbg(&pdev->dev, "DMA not available\n"); + retval = -ENODEV; + goto err_dma; + } + + retval = atmel_ac97c_pcm_new(chip); + if (retval) { + dev_dbg(&pdev->dev, "could not register ac97 pcm device\n"); + goto err_dma; + } + + retval = snd_card_register(card); + if (retval) { + dev_dbg(&pdev->dev, "could not register sound card\n"); + goto err_ac97_bus; + } + + platform_set_drvdata(pdev, card); + + dev_info(&pdev->dev, "Atmel AC97 controller at 0x%p\n", + chip->regs); + + return 0; + +err_dma: + if (test_bit(DMA_RX_CHAN_PRESENT, &chip->flags)) + dma_release_channel(chip->dma.rx_chan); + if (test_bit(DMA_TX_CHAN_PRESENT, &chip->flags)) + dma_release_channel(chip->dma.tx_chan); + clear_bit(DMA_RX_CHAN_PRESENT, &chip->flags); + clear_bit(DMA_TX_CHAN_PRESENT, &chip->flags); + chip->dma.rx_chan = NULL; + chip->dma.tx_chan = NULL; +err_ac97_bus: + snd_card_set_dev(card, NULL); + + if (gpio_is_valid(chip->reset_pin)) + gpio_free(chip->reset_pin); + + iounmap(chip->regs); +err_ioremap: + snd_card_free(card); +err_snd_card_new: + clk_disable(pclk); + clk_put(pclk); + return retval; +} + +#ifdef CONFIG_PM +static int atmel_ac97c_suspend(struct platform_device *pdev, pm_message_t msg) +{ + struct snd_card *card = platform_get_drvdata(pdev); + struct atmel_ac97c *chip = card->private_data; + + if (test_bit(DMA_RX_READY, &chip->flags)) + dw_dma_cyclic_stop(chip->dma.rx_chan); + if (test_bit(DMA_TX_READY, &chip->flags)) + dw_dma_cyclic_stop(chip->dma.tx_chan); + clk_disable(chip->pclk); + + return 0; +} + +static int atmel_ac97c_resume(struct platform_device *pdev) +{ + struct snd_card *card = platform_get_drvdata(pdev); + struct atmel_ac97c *chip = card->private_data; + + clk_enable(chip->pclk); + if (test_bit(DMA_RX_READY, &chip->flags)) + dw_dma_cyclic_start(chip->dma.rx_chan); + if (test_bit(DMA_TX_READY, &chip->flags)) + dw_dma_cyclic_start(chip->dma.tx_chan); + + return 0; +} +#else +#define atmel_ac97c_suspend NULL +#define atmel_ac97c_resume NULL +#endif + +static int __devexit atmel_ac97c_remove(struct platform_device *pdev) +{ + struct snd_card *card = platform_get_drvdata(pdev); + struct atmel_ac97c *chip = get_chip(card); + + if (gpio_is_valid(chip->reset_pin)) + gpio_free(chip->reset_pin); + + clk_disable(chip->pclk); + clk_put(chip->pclk); + iounmap(chip->regs); + + if (test_bit(DMA_RX_CHAN_PRESENT, &chip->flags)) + dma_release_channel(chip->dma.rx_chan); + if (test_bit(DMA_TX_CHAN_PRESENT, &chip->flags)) + dma_release_channel(chip->dma.tx_chan); + clear_bit(DMA_RX_CHAN_PRESENT, &chip->flags); + clear_bit(DMA_TX_CHAN_PRESENT, &chip->flags); + chip->dma.rx_chan = NULL; + chip->dma.tx_chan = NULL; + + snd_card_set_dev(card, NULL); + snd_card_free(card); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver atmel_ac97c_driver = { + .remove = __devexit_p(atmel_ac97c_remove), + .driver = { + .name = "atmel_ac97c", + }, + .suspend = atmel_ac97c_suspend, + .resume = atmel_ac97c_resume, +}; + +static int __init atmel_ac97c_init(void) +{ + return platform_driver_probe(&atmel_ac97c_driver, + atmel_ac97c_probe); +} +module_init(atmel_ac97c_init); + +static void __exit atmel_ac97c_exit(void) +{ + platform_driver_unregister(&atmel_ac97c_driver); +} +module_exit(atmel_ac97c_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for Atmel AC97 controller"); +MODULE_AUTHOR("Hans-Christian Egtvedt "); diff --git a/sound/atmel/ac97c.h b/sound/atmel/ac97c.h new file mode 100644 index 000000000000..c17bd5825980 --- /dev/null +++ b/sound/atmel/ac97c.h @@ -0,0 +1,71 @@ +/* + * Register definitions for the Atmel AC97C controller + * + * Copyright (C) 2005-2009 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __SOUND_ATMEL_AC97C_H +#define __SOUND_ATMEL_AC97C_H + +#define AC97C_MR 0x08 +#define AC97C_ICA 0x10 +#define AC97C_OCA 0x14 +#define AC97C_CARHR 0x20 +#define AC97C_CATHR 0x24 +#define AC97C_CASR 0x28 +#define AC97C_CAMR 0x2c +#define AC97C_CBRHR 0x30 +#define AC97C_CBTHR 0x34 +#define AC97C_CBSR 0x38 +#define AC97C_CBMR 0x3c +#define AC97C_CORHR 0x40 +#define AC97C_COTHR 0x44 +#define AC97C_COSR 0x48 +#define AC97C_COMR 0x4c +#define AC97C_SR 0x50 +#define AC97C_IER 0x54 +#define AC97C_IDR 0x58 +#define AC97C_IMR 0x5c +#define AC97C_VERSION 0xfc + +#define AC97C_CATPR PDC_TPR +#define AC97C_CATCR PDC_TCR +#define AC97C_CATNPR PDC_TNPR +#define AC97C_CATNCR PDC_TNCR +#define AC97C_CARPR PDC_RPR +#define AC97C_CARCR PDC_RCR +#define AC97C_CARNPR PDC_RNPR +#define AC97C_CARNCR PDC_RNCR +#define AC97C_PTCR PDC_PTCR + +#define AC97C_MR_ENA (1 << 0) +#define AC97C_MR_WRST (1 << 1) +#define AC97C_MR_VRA (1 << 2) + +#define AC97C_CSR_TXRDY (1 << 0) +#define AC97C_CSR_UNRUN (1 << 2) +#define AC97C_CSR_RXRDY (1 << 4) +#define AC97C_CSR_ENDTX (1 << 10) +#define AC97C_CSR_ENDRX (1 << 14) + +#define AC97C_CMR_SIZE_20 (0 << 16) +#define AC97C_CMR_SIZE_18 (1 << 16) +#define AC97C_CMR_SIZE_16 (2 << 16) +#define AC97C_CMR_SIZE_10 (3 << 16) +#define AC97C_CMR_CEM_LITTLE (1 << 18) +#define AC97C_CMR_CEM_BIG (0 << 18) +#define AC97C_CMR_CENA (1 << 21) +#define AC97C_CMR_DMAEN (1 << 22) + +#define AC97C_SR_CAEVT (1 << 3) + +#define AC97C_CH_ASSIGN(slot, channel) \ + (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3))) +#define AC97C_CHANNEL_NONE 0x0 +#define AC97C_CHANNEL_A 0x1 +#define AC97C_CHANNEL_B 0x2 + +#endif /* __SOUND_ATMEL_AC97C_H */ -- cgit v1.2.3 From 6c7578bb0a631d018a68e5f90554f29fbd928055 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Thu, 5 Feb 2009 13:11:01 +0100 Subject: ALSA: Add Atmel ALSA drivers directory Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen Signed-off-by: Takashi Iwai --- sound/Kconfig | 2 ++ sound/Makefile | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/Kconfig b/sound/Kconfig index 200aca1faa71..1eceb85287c5 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -60,6 +60,8 @@ source "sound/aoa/Kconfig" source "sound/arm/Kconfig" +source "sound/atmel/Kconfig" + source "sound/spi/Kconfig" source "sound/mips/Kconfig" diff --git a/sound/Makefile b/sound/Makefile index c76d70716fa5..ec467decfa79 100644 --- a/sound/Makefile +++ b/sound/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_DMASOUND) += oss/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ - sparc/ spi/ parisc/ pcmcia/ mips/ soc/ + sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ obj-$(CONFIG_SND_AOA) += aoa/ # This one must be compilable even if sound is configured out -- cgit v1.2.3 From 76d498e43fa5f9f0a148dca8915cc7e9d9b9a643 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:45:05 +0100 Subject: ALSA: wss - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/isa/wss/wss_lib.c | 76 ++++++++++++++++++++++++++++++++++--------------- 1 file changed, 53 insertions(+), 23 deletions(-) diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 3d6c5f2838af..8de5deda7ad6 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -219,7 +219,8 @@ void snd_wss_out(struct snd_wss *chip, unsigned char reg, unsigned char value) snd_wss_wait(chip); #ifdef CONFIG_SND_DEBUG if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) - snd_printk("out: auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value); + snd_printk(KERN_DEBUG "out: auto calibration time out " + "- reg = 0x%x, value = 0x%x\n", reg, value); #endif wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg); wss_outb(chip, CS4231P(REG), value); @@ -235,7 +236,8 @@ unsigned char snd_wss_in(struct snd_wss *chip, unsigned char reg) snd_wss_wait(chip); #ifdef CONFIG_SND_DEBUG if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) - snd_printk("in: auto calibration time out - reg = 0x%x\n", reg); + snd_printk(KERN_DEBUG "in: auto calibration time out " + "- reg = 0x%x\n", reg); #endif wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg); mb(); @@ -252,7 +254,7 @@ void snd_cs4236_ext_out(struct snd_wss *chip, unsigned char reg, wss_outb(chip, CS4231P(REG), val); chip->eimage[CS4236_REG(reg)] = val; #if 0 - printk("ext out : reg = 0x%x, val = 0x%x\n", reg, val); + printk(KERN_DEBUG "ext out : reg = 0x%x, val = 0x%x\n", reg, val); #endif } EXPORT_SYMBOL(snd_cs4236_ext_out); @@ -268,7 +270,8 @@ unsigned char snd_cs4236_ext_in(struct snd_wss *chip, unsigned char reg) { unsigned char res; res = wss_inb(chip, CS4231P(REG)); - printk("ext in : reg = 0x%x, val = 0x%x\n", reg, res); + printk(KERN_DEBUG "ext in : reg = 0x%x, val = 0x%x\n", + reg, res); return res; } #endif @@ -394,13 +397,16 @@ void snd_wss_mce_up(struct snd_wss *chip) snd_wss_wait(chip); #ifdef CONFIG_SND_DEBUG if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) - snd_printk("mce_up - auto calibration time out (0)\n"); + snd_printk(KERN_DEBUG + "mce_up - auto calibration time out (0)\n"); #endif spin_lock_irqsave(&chip->reg_lock, flags); chip->mce_bit |= CS4231_MCE; timeout = wss_inb(chip, CS4231P(REGSEL)); if (timeout == 0x80) - snd_printk("mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port); + snd_printk(KERN_DEBUG "mce_up [0x%lx]: " + "serious init problem - codec still busy\n", + chip->port); if (!(timeout & CS4231_MCE)) wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | (timeout & 0x1f)); @@ -419,7 +425,9 @@ void snd_wss_mce_down(struct snd_wss *chip) #ifdef CONFIG_SND_DEBUG if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) - snd_printk("mce_down [0x%lx] - auto calibration time out (0)\n", (long)CS4231P(REGSEL)); + snd_printk(KERN_DEBUG "mce_down [0x%lx] - " + "auto calibration time out (0)\n", + (long)CS4231P(REGSEL)); #endif spin_lock_irqsave(&chip->reg_lock, flags); chip->mce_bit &= ~CS4231_MCE; @@ -427,7 +435,9 @@ void snd_wss_mce_down(struct snd_wss *chip) wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | (timeout & 0x1f)); spin_unlock_irqrestore(&chip->reg_lock, flags); if (timeout == 0x80) - snd_printk("mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port); + snd_printk(KERN_DEBUG "mce_down [0x%lx]: " + "serious init problem - codec still busy\n", + chip->port); if ((timeout & CS4231_MCE) == 0 || !(chip->hardware & hw_mask)) return; @@ -565,7 +575,7 @@ static unsigned char snd_wss_get_format(struct snd_wss *chip, if (channels > 1) rformat |= CS4231_STEREO; #if 0 - snd_printk("get_format: 0x%x (mode=0x%x)\n", format, mode); + snd_printk(KERN_DEBUG "get_format: 0x%x (mode=0x%x)\n", format, mode); #endif return rformat; } @@ -774,7 +784,7 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE - snd_printk("init: (1)\n"); + snd_printk(KERN_DEBUG "init: (1)\n"); #endif snd_wss_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); @@ -789,7 +799,7 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE - snd_printk("init: (2)\n"); + snd_printk(KERN_DEBUG "init: (2)\n"); #endif snd_wss_mce_up(chip); @@ -800,7 +810,7 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE - snd_printk("init: (3) - afei = 0x%x\n", + snd_printk(KERN_DEBUG "init: (3) - afei = 0x%x\n", chip->image[CS4231_ALT_FEATURE_1]); #endif @@ -817,7 +827,7 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE - snd_printk("init: (4)\n"); + snd_printk(KERN_DEBUG "init: (4)\n"); #endif snd_wss_mce_up(chip); @@ -829,7 +839,7 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE - snd_printk("init: (5)\n"); + snd_printk(KERN_DEBUG "init: (5)\n"); #endif } @@ -1278,7 +1288,8 @@ static int snd_wss_probe(struct snd_wss *chip) } else if (rev == 0x03) { chip->hardware = WSS_HW_CS4236B; } else { - snd_printk("unknown CS chip with version 0x%x\n", rev); + snd_printk(KERN_ERR + "unknown CS chip with version 0x%x\n", rev); return -ENODEV; /* unknown CS4231 chip? */ } } @@ -1342,7 +1353,10 @@ static int snd_wss_probe(struct snd_wss *chip) case 6: break; default: - snd_printk("unknown CS4235 chip (enhanced version = 0x%x)\n", id); + snd_printk(KERN_WARNING + "unknown CS4235 chip " + "(enhanced version = 0x%x)\n", + id); } } else if ((id & 0x1f) == 0x0b) { /* CS4236/B */ switch (id >> 5) { @@ -1353,7 +1367,10 @@ static int snd_wss_probe(struct snd_wss *chip) chip->hardware = WSS_HW_CS4236B; break; default: - snd_printk("unknown CS4236 chip (enhanced version = 0x%x)\n", id); + snd_printk(KERN_WARNING + "unknown CS4236 chip " + "(enhanced version = 0x%x)\n", + id); } } else if ((id & 0x1f) == 0x08) { /* CS4237B */ chip->hardware = WSS_HW_CS4237B; @@ -1364,7 +1381,10 @@ static int snd_wss_probe(struct snd_wss *chip) case 7: break; default: - snd_printk("unknown CS4237B chip (enhanced version = 0x%x)\n", id); + snd_printk(KERN_WARNING + "unknown CS4237B chip " + "(enhanced version = 0x%x)\n", + id); } } else if ((id & 0x1f) == 0x09) { /* CS4238B */ chip->hardware = WSS_HW_CS4238B; @@ -1374,7 +1394,10 @@ static int snd_wss_probe(struct snd_wss *chip) case 7: break; default: - snd_printk("unknown CS4238B chip (enhanced version = 0x%x)\n", id); + snd_printk(KERN_WARNING + "unknown CS4238B chip " + "(enhanced version = 0x%x)\n", + id); } } else if ((id & 0x1f) == 0x1e) { /* CS4239 */ chip->hardware = WSS_HW_CS4239; @@ -1384,10 +1407,15 @@ static int snd_wss_probe(struct snd_wss *chip) case 6: break; default: - snd_printk("unknown CS4239 chip (enhanced version = 0x%x)\n", id); + snd_printk(KERN_WARNING + "unknown CS4239 chip " + "(enhanced version = 0x%x)\n", + id); } } else { - snd_printk("unknown CS4236/CS423xB chip (enhanced version = 0x%x)\n", id); + snd_printk(KERN_WARNING + "unknown CS4236/CS423xB chip " + "(enhanced version = 0x%x)\n", id); } } } @@ -1618,7 +1646,8 @@ static void snd_wss_resume(struct snd_wss *chip) wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | (timeout & 0x1f)); spin_unlock_irqrestore(&chip->reg_lock, flags); if (timeout == 0x80) - snd_printk("down [0x%lx]: serious init problem - codec still busy\n", chip->port); + snd_printk(KERN_ERR "down [0x%lx]: serious init problem " + "- codec still busy\n", chip->port); if ((timeout & CS4231_MCE) == 0 || !(chip->hardware & (WSS_HW_CS4231_MASK | WSS_HW_CS4232_MASK))) { return; @@ -1820,7 +1849,8 @@ int snd_wss_create(struct snd_card *card, #if 0 if (chip->hardware & WSS_HW_CS4232_MASK) { if (chip->res_cport == NULL) - snd_printk("CS4232 control port features are not accessible\n"); + snd_printk(KERN_ERR "CS4232 control port features are " + "not accessible\n"); } #endif -- cgit v1.2.3 From 91f050604cc045a0b7aa0460d36eb6e0f0cb301a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:46:48 +0100 Subject: ALSA: gus - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/isa/gus/gus_dma.c | 3 ++- sound/isa/gus/gus_irq.c | 6 ++++-- sound/isa/gus/gus_pcm.c | 26 ++++++++++++++++++++------ sound/isa/gus/gus_uart.c | 10 ++++++++-- sound/isa/gus/interwave.c | 16 +++++++++------- 5 files changed, 43 insertions(+), 18 deletions(-) diff --git a/sound/isa/gus/gus_dma.c b/sound/isa/gus/gus_dma.c index cf8cd3c26a55..36c27c832360 100644 --- a/sound/isa/gus/gus_dma.c +++ b/sound/isa/gus/gus_dma.c @@ -78,7 +78,8 @@ static void snd_gf1_dma_program(struct snd_gus_card * gus, snd_gf1_dma_ack(gus); snd_dma_program(gus->gf1.dma1, buf_addr, count, dma_cmd & SNDRV_GF1_DMA_READ ? DMA_MODE_READ : DMA_MODE_WRITE); #if 0 - snd_printk("address = 0x%x, count = 0x%x, dma_cmd = 0x%x\n", address << 1, count, dma_cmd); + snd_printk(KERN_DEBUG "address = 0x%x, count = 0x%x, dma_cmd = 0x%x\n", + address << 1, count, dma_cmd); #endif spin_lock_irqsave(&gus->reg_lock, flags); if (gus->gf1.enh_mode) { diff --git a/sound/isa/gus/gus_irq.c b/sound/isa/gus/gus_irq.c index 041894ddd014..2055aff71b50 100644 --- a/sound/isa/gus/gus_irq.c +++ b/sound/isa/gus/gus_irq.c @@ -41,7 +41,7 @@ __again: if (status == 0) return IRQ_RETVAL(handled); handled = 1; - // snd_printk("IRQ: status = 0x%x\n", status); + /* snd_printk(KERN_DEBUG "IRQ: status = 0x%x\n", status); */ if (status & 0x02) { STAT_ADD(gus->gf1.interrupt_stat_midi_in); if (gus->gf1.interrupt_handler_midi_in) @@ -65,7 +65,9 @@ __again: continue; /* multi request */ already |= _current_; /* mark request */ #if 0 - printk("voice = %i, voice_status = 0x%x, voice_verify = %i\n", voice, voice_status, inb(GUSP(gus, GF1PAGE))); + printk(KERN_DEBUG "voice = %i, voice_status = 0x%x, " + "voice_verify = %i\n", + voice, voice_status, inb(GUSP(gus, GF1PAGE))); #endif pvoice = &gus->gf1.voices[voice]; if (pvoice->use) { diff --git a/sound/isa/gus/gus_pcm.c b/sound/isa/gus/gus_pcm.c index 38510aeb21c6..edb11eefdfe3 100644 --- a/sound/isa/gus/gus_pcm.c +++ b/sound/isa/gus/gus_pcm.c @@ -82,7 +82,10 @@ static int snd_gf1_pcm_block_change(struct snd_pcm_substream *substream, count += offset & 31; offset &= ~31; - // snd_printk("block change - offset = 0x%x, count = 0x%x\n", offset, count); + /* + snd_printk(KERN_DEBUG "block change - offset = 0x%x, count = 0x%x\n", + offset, count); + */ memset(&block, 0, sizeof(block)); block.cmd = SNDRV_GF1_DMA_IRQ; if (snd_pcm_format_unsigned(runtime->format)) @@ -135,7 +138,11 @@ static void snd_gf1_pcm_trigger_up(struct snd_pcm_substream *substream) curr = begin + (pcmp->bpos * pcmp->block_size) / runtime->channels; end = curr + (pcmp->block_size / runtime->channels); end -= snd_pcm_format_width(runtime->format) == 16 ? 2 : 1; - // snd_printk("init: curr=0x%x, begin=0x%x, end=0x%x, ctrl=0x%x, ramp=0x%x, rate=0x%x\n", curr, begin, end, voice_ctrl, ramp_ctrl, rate); + /* + snd_printk(KERN_DEBUG "init: curr=0x%x, begin=0x%x, end=0x%x, " + "ctrl=0x%x, ramp=0x%x, rate=0x%x\n", + curr, begin, end, voice_ctrl, ramp_ctrl, rate); + */ pan = runtime->channels == 2 ? (!voice ? 1 : 14) : 8; vol = !voice ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right; spin_lock_irqsave(&gus->reg_lock, flags); @@ -205,9 +212,11 @@ static void snd_gf1_pcm_interrupt_wave(struct snd_gus_card * gus, ramp_ctrl = (snd_gf1_read8(gus, SNDRV_GF1_VB_VOLUME_CONTROL) & ~0xa4) | 0x03; #if 0 snd_gf1_select_voice(gus, pvoice->number); - printk("position = 0x%x\n", (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4)); + printk(KERN_DEBUG "position = 0x%x\n", + (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4)); snd_gf1_select_voice(gus, pcmp->pvoices[1]->number); - printk("position = 0x%x\n", (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4)); + printk(KERN_DEBUG "position = 0x%x\n", + (snd_gf1_read_addr(gus, SNDRV_GF1_VA_CURRENT, voice_ctrl & 4) >> 4)); snd_gf1_select_voice(gus, pvoice->number); #endif pcmp->bpos++; @@ -299,7 +308,11 @@ static int snd_gf1_pcm_poke_block(struct snd_gus_card *gus, unsigned char *buf, unsigned int len; unsigned long flags; - // printk("poke block; buf = 0x%x, pos = %i, count = %i, port = 0x%x\n", (int)buf, pos, count, gus->gf1.port); + /* + printk(KERN_DEBUG + "poke block; buf = 0x%x, pos = %i, count = %i, port = 0x%x\n", + (int)buf, pos, count, gus->gf1.port); + */ while (count > 0) { len = count; if (len > 512) /* limit, to allow IRQ */ @@ -680,7 +693,8 @@ static int snd_gf1_pcm_playback_open(struct snd_pcm_substream *substream) runtime->private_free = snd_gf1_pcm_playback_free; #if 0 - printk("playback.buffer = 0x%lx, gf1.pcm_buffer = 0x%lx\n", (long) pcm->playback.buffer, (long) gus->gf1.pcm_buffer); + printk(KERN_DEBUG "playback.buffer = 0x%lx, gf1.pcm_buffer = 0x%lx\n", + (long) pcm->playback.buffer, (long) gus->gf1.pcm_buffer); #endif if ((err = snd_gf1_dma_init(gus)) < 0) return err; diff --git a/sound/isa/gus/gus_uart.c b/sound/isa/gus/gus_uart.c index f0af3f79b08b..21cc42e4c4be 100644 --- a/sound/isa/gus/gus_uart.c +++ b/sound/isa/gus/gus_uart.c @@ -129,8 +129,14 @@ static int snd_gf1_uart_input_open(struct snd_rawmidi_substream *substream) } spin_unlock_irqrestore(&gus->uart_cmd_lock, flags); #if 0 - snd_printk("read init - enable = %i, cmd = 0x%x, stat = 0x%x\n", gus->uart_enable, gus->gf1.uart_cmd, snd_gf1_uart_stat(gus)); - snd_printk("[0x%x] reg (ctrl/status) = 0x%x, reg (data) = 0x%x (page = 0x%x)\n", gus->gf1.port + 0x100, inb(gus->gf1.port + 0x100), inb(gus->gf1.port + 0x101), inb(gus->gf1.port + 0x102)); + snd_printk(KERN_DEBUG + "read init - enable = %i, cmd = 0x%x, stat = 0x%x\n", + gus->uart_enable, gus->gf1.uart_cmd, snd_gf1_uart_stat(gus)); + snd_printk(KERN_DEBUG + "[0x%x] reg (ctrl/status) = 0x%x, reg (data) = 0x%x " + "(page = 0x%x)\n", + gus->gf1.port + 0x100, inb(gus->gf1.port + 0x100), + inb(gus->gf1.port + 0x101), inb(gus->gf1.port + 0x102)); #endif return 0; } diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index 5faecfb602d3..418d49eef926 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -170,7 +170,7 @@ static void snd_interwave_i2c_setlines(struct snd_i2c_bus *bus, int ctrl, int da unsigned long port = bus->private_value; #if 0 - printk("i2c_setlines - 0x%lx <- %i,%i\n", port, ctrl, data); + printk(KERN_DEBUG "i2c_setlines - 0x%lx <- %i,%i\n", port, ctrl, data); #endif outb((data << 1) | ctrl, port); udelay(10); @@ -183,7 +183,7 @@ static int snd_interwave_i2c_getclockline(struct snd_i2c_bus *bus) res = inb(port) & 1; #if 0 - printk("i2c_getclockline - 0x%lx -> %i\n", port, res); + printk(KERN_DEBUG "i2c_getclockline - 0x%lx -> %i\n", port, res); #endif return res; } @@ -197,7 +197,7 @@ static int snd_interwave_i2c_getdataline(struct snd_i2c_bus *bus, int ack) udelay(10); res = (inb(port) & 2) >> 1; #if 0 - printk("i2c_getdataline - 0x%lx -> %i\n", port, res); + printk(KERN_DEBUG "i2c_getdataline - 0x%lx -> %i\n", port, res); #endif return res; } @@ -342,7 +342,8 @@ static void __devinit snd_interwave_bank_sizes(struct snd_gus_card * gus, int *s snd_gf1_poke(gus, local, d); snd_gf1_poke(gus, local + 1, d + 1); #if 0 - printk("d = 0x%x, local = 0x%x, local + 1 = 0x%x, idx << 22 = 0x%x\n", + printk(KERN_DEBUG "d = 0x%x, local = 0x%x, " + "local + 1 = 0x%x, idx << 22 = 0x%x\n", d, snd_gf1_peek(gus, local), snd_gf1_peek(gus, local + 1), @@ -356,7 +357,8 @@ static void __devinit snd_interwave_bank_sizes(struct snd_gus_card * gus, int *s } } #if 0 - printk("sizes: %i %i %i %i\n", sizes[0], sizes[1], sizes[2], sizes[3]); + printk(KERN_DEBUG "sizes: %i %i %i %i\n", + sizes[0], sizes[1], sizes[2], sizes[3]); #endif } @@ -410,12 +412,12 @@ static void __devinit snd_interwave_detect_memory(struct snd_gus_card * gus) lmct = (psizes[3] << 24) | (psizes[2] << 16) | (psizes[1] << 8) | psizes[0]; #if 0 - printk("lmct = 0x%08x\n", lmct); + printk(KERN_DEBUG "lmct = 0x%08x\n", lmct); #endif for (i = 0; i < ARRAY_SIZE(lmc); i++) if (lmct == lmc[i]) { #if 0 - printk("found !!! %i\n", i); + printk(KERN_DEBUG "found !!! %i\n", i); #endif snd_gf1_write16(gus, SNDRV_GF1_GW_MEMORY_CONFIG, (snd_gf1_look16(gus, SNDRV_GF1_GW_MEMORY_CONFIG) & 0xfff0) | i); snd_interwave_bank_sizes(gus, psizes); -- cgit v1.2.3 From 4c9f1d3ed7e5f910b66dc4d1456cfac17e58cf0e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:47:51 +0100 Subject: ALSA: isa/*: Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/isa/ad1816a/ad1816a_lib.c | 6 +++--- sound/isa/cs423x/cs4236_lib.c | 21 ++++++++++++++------- sound/isa/es1688/es1688_lib.c | 23 +++++++++++++++-------- sound/isa/opl3sa2.c | 10 +++++++--- sound/isa/opti9xx/opti92x-ad1848.c | 30 +++++++++++++++++------------- sound/isa/wavefront/wavefront.c | 4 ++-- sound/isa/wavefront/wavefront_synth.c | 2 +- 7 files changed, 59 insertions(+), 37 deletions(-) diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c index 1c9e01ecac0b..05aef8b97e96 100644 --- a/sound/isa/ad1816a/ad1816a_lib.c +++ b/sound/isa/ad1816a/ad1816a_lib.c @@ -37,7 +37,7 @@ static inline int snd_ad1816a_busy_wait(struct snd_ad1816a *chip) if (inb(AD1816A_REG(AD1816A_CHIP_STATUS)) & AD1816A_READY) return 0; - snd_printk("chip busy.\n"); + snd_printk(KERN_WARNING "chip busy.\n"); return -EBUSY; } @@ -196,7 +196,7 @@ static int snd_ad1816a_trigger(struct snd_ad1816a *chip, unsigned char what, spin_unlock(&chip->lock); break; default: - snd_printk("invalid trigger mode 0x%x.\n", what); + snd_printk(KERN_WARNING "invalid trigger mode 0x%x.\n", what); error = -EINVAL; } @@ -565,7 +565,7 @@ static const char __devinit *snd_ad1816a_chip_id(struct snd_ad1816a *chip) case AD1816A_HW_AD1815: return "AD1815"; case AD1816A_HW_AD18MAX10: return "AD18max10"; default: - snd_printk("Unknown chip version %d:%d.\n", + snd_printk(KERN_WARNING "Unknown chip version %d:%d.\n", chip->version, chip->hardware); return "AD1816A - unknown"; } diff --git a/sound/isa/cs423x/cs4236_lib.c b/sound/isa/cs423x/cs4236_lib.c index 6a85fdc53b60..2406efdfd8dd 100644 --- a/sound/isa/cs423x/cs4236_lib.c +++ b/sound/isa/cs423x/cs4236_lib.c @@ -286,7 +286,8 @@ int snd_cs4236_create(struct snd_card *card, if (hardware == WSS_HW_DETECT) hardware = WSS_HW_DETECT3; if (cport < 0x100) { - snd_printk("please, specify control port for CS4236+ chips\n"); + snd_printk(KERN_ERR "please, specify control port " + "for CS4236+ chips\n"); return -ENODEV; } err = snd_wss_create(card, port, cport, @@ -295,7 +296,8 @@ int snd_cs4236_create(struct snd_card *card, return err; if (!(chip->hardware & WSS_HW_CS4236B_MASK)) { - snd_printk("CS4236+: MODE3 and extended registers not available, hardware=0x%x\n",chip->hardware); + snd_printk(KERN_ERR "CS4236+: MODE3 and extended registers " + "not available, hardware=0x%x\n", chip->hardware); snd_device_free(card, chip); return -ENODEV; } @@ -303,16 +305,19 @@ int snd_cs4236_create(struct snd_card *card, { int idx; for (idx = 0; idx < 8; idx++) - snd_printk("CD%i = 0x%x\n", idx, inb(chip->cport + idx)); + snd_printk(KERN_DEBUG "CD%i = 0x%x\n", + idx, inb(chip->cport + idx)); for (idx = 0; idx < 9; idx++) - snd_printk("C%i = 0x%x\n", idx, snd_cs4236_ctrl_in(chip, idx)); + snd_printk(KERN_DEBUG "C%i = 0x%x\n", + idx, snd_cs4236_ctrl_in(chip, idx)); } #endif ver1 = snd_cs4236_ctrl_in(chip, 1); ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION); snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", cport, ver1, ver2); if (ver1 != ver2) { - snd_printk("CS4236+ chip detected, but control port 0x%lx is not valid\n", cport); + snd_printk(KERN_ERR "CS4236+ chip detected, but " + "control port 0x%lx is not valid\n", cport); snd_device_free(card, chip); return -ENODEV; } @@ -883,7 +888,8 @@ static int snd_cs4236_get_iec958_switch(struct snd_kcontrol *kcontrol, struct sn spin_lock_irqsave(&chip->reg_lock, flags); ucontrol->value.integer.value[0] = chip->image[CS4231_ALT_FEATURE_1] & 0x02 ? 1 : 0; #if 0 - printk("get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n", + printk(KERN_DEBUG "get valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, " + "C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n", snd_wss_in(chip, CS4231_ALT_FEATURE_1), snd_cs4236_ctrl_in(chip, 3), snd_cs4236_ctrl_in(chip, 4), @@ -920,7 +926,8 @@ static int snd_cs4236_put_iec958_switch(struct snd_kcontrol *kcontrol, struct sn mutex_unlock(&chip->mce_mutex); #if 0 - printk("set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n", + printk(KERN_DEBUG "set valid: ALT = 0x%x, C3 = 0x%x, C4 = 0x%x, " + "C5 = 0x%x, C6 = 0x%x, C8 = 0x%x\n", snd_wss_in(chip, CS4231_ALT_FEATURE_1), snd_cs4236_ctrl_in(chip, 3), snd_cs4236_ctrl_in(chip, 4), diff --git a/sound/isa/es1688/es1688_lib.c b/sound/isa/es1688/es1688_lib.c index 4fbb508a817f..4c6e14f87f2d 100644 --- a/sound/isa/es1688/es1688_lib.c +++ b/sound/isa/es1688/es1688_lib.c @@ -45,7 +45,7 @@ static int snd_es1688_dsp_command(struct snd_es1688 *chip, unsigned char val) return 1; } #ifdef CONFIG_SND_DEBUG - printk("snd_es1688_dsp_command: timeout (0x%x)\n", val); + printk(KERN_DEBUG "snd_es1688_dsp_command: timeout (0x%x)\n", val); #endif return 0; } @@ -167,13 +167,16 @@ static int snd_es1688_probe(struct snd_es1688 *chip) hw = ES1688_HW_AUTO; switch (chip->version & 0xfff0) { case 0x4880: - snd_printk("[0x%lx] ESS: AudioDrive ES488 detected, but driver is in another place\n", chip->port); + snd_printk(KERN_ERR "[0x%lx] ESS: AudioDrive ES488 detected, " + "but driver is in another place\n", chip->port); return -ENODEV; case 0x6880: hw = (chip->version & 0x0f) >= 8 ? ES1688_HW_1688 : ES1688_HW_688; break; default: - snd_printk("[0x%lx] ESS: unknown AudioDrive chip with version 0x%x (Jazz16 soundcard?)\n", chip->port, chip->version); + snd_printk(KERN_ERR "[0x%lx] ESS: unknown AudioDrive chip " + "with version 0x%x (Jazz16 soundcard?)\n", + chip->port, chip->version); return -ENODEV; } @@ -223,7 +226,7 @@ static int snd_es1688_init(struct snd_es1688 * chip, int enable) } } #if 0 - snd_printk("mpu cfg = 0x%x\n", cfg); + snd_printk(KERN_DEBUG "mpu cfg = 0x%x\n", cfg); #endif spin_lock_irqsave(&chip->reg_lock, flags); snd_es1688_mixer_write(chip, 0x40, cfg); @@ -237,7 +240,9 @@ static int snd_es1688_init(struct snd_es1688 * chip, int enable) cfg = 0xf0; /* enable only DMA counter interrupt */ irq_bits = irqs[chip->irq & 0x0f]; if (irq_bits < 0) { - snd_printk("[0x%lx] ESS: bad IRQ %d for ES1688 chip!!\n", chip->port, chip->irq); + snd_printk(KERN_ERR "[0x%lx] ESS: bad IRQ %d " + "for ES1688 chip!!\n", + chip->port, chip->irq); #if 0 irq_bits = 0; cfg = 0x10; @@ -250,7 +255,8 @@ static int snd_es1688_init(struct snd_es1688 * chip, int enable) cfg = 0xf0; /* extended mode DMA enable */ dma = chip->dma8; if (dma > 3 || dma == 2) { - snd_printk("[0x%lx] ESS: bad DMA channel %d for ES1688 chip!!\n", chip->port, dma); + snd_printk(KERN_ERR "[0x%lx] ESS: bad DMA channel %d " + "for ES1688 chip!!\n", chip->port, dma); #if 0 dma_bits = 0; cfg = 0x00; /* disable all DMA */ @@ -341,8 +347,9 @@ static int snd_es1688_trigger(struct snd_es1688 *chip, int cmd, unsigned char va return -EINVAL; /* something is wrong */ } #if 0 - printk("trigger: val = 0x%x, value = 0x%x\n", val, value); - printk("trigger: pointer = 0x%x\n", snd_dma_pointer(chip->dma8, chip->dma_size)); + printk(KERN_DEBUG "trigger: val = 0x%x, value = 0x%x\n", val, value); + printk(KERN_DEBUG "trigger: pointer = 0x%x\n", + snd_dma_pointer(chip->dma8, chip->dma_size)); #endif snd_es1688_write(chip, 0xb8, (val & 0xf0) | value); spin_unlock(&chip->reg_lock); diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 58c972b2af03..06810dfb9d9a 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -179,12 +179,13 @@ static unsigned char __snd_opl3sa2_read(struct snd_opl3sa2 *chip, unsigned char unsigned char result; #if 0 outb(0x1d, port); /* password */ - printk("read [0x%lx] = 0x%x\n", port, inb(port)); + printk(KERN_DEBUG "read [0x%lx] = 0x%x\n", port, inb(port)); #endif outb(reg, chip->port); /* register */ result = inb(chip->port + 1); #if 0 - printk("read [0x%lx] = 0x%x [0x%x]\n", port, result, inb(port)); + printk(KERN_DEBUG "read [0x%lx] = 0x%x [0x%x]\n", + port, result, inb(port)); #endif return result; } @@ -233,7 +234,10 @@ static int __devinit snd_opl3sa2_detect(struct snd_card *card) snd_printk(KERN_ERR PFX "can't grab port 0x%lx\n", port); return -EBUSY; } - // snd_printk("REG 0A = 0x%x\n", snd_opl3sa2_read(chip, 0x0a)); + /* + snd_printk(KERN_DEBUG "REG 0A = 0x%x\n", + snd_opl3sa2_read(chip, 0x0a)); + */ chip->version = 0; tmp = snd_opl3sa2_read(chip, OPL3SA2_MISC); if (tmp == 0xff) { diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5deb7e69a029..d5bc0e03132a 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -252,7 +252,7 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip, #endif /* OPTi93X */ default: - snd_printk("chip %d not supported\n", hardware); + snd_printk(KERN_ERR "chip %d not supported\n", hardware); return -ENODEV; } return 0; @@ -294,7 +294,7 @@ static unsigned char snd_opti9xx_read(struct snd_opti9xx *chip, #endif /* OPTi93X */ default: - snd_printk("chip %d not supported\n", chip->hardware); + snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware); } spin_unlock_irqrestore(&chip->lock, flags); @@ -336,7 +336,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg, #endif /* OPTi93X */ default: - snd_printk("chip %d not supported\n", chip->hardware); + snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware); } spin_unlock_irqrestore(&chip->lock, flags); @@ -412,7 +412,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) #endif /* OPTi93X */ default: - snd_printk("chip %d not supported\n", chip->hardware); + snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware); return -EINVAL; } @@ -430,7 +430,8 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) wss_base_bits = 0x02; break; default: - snd_printk("WSS port 0x%lx not valid\n", chip->wss_base); + snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", + chip->wss_base); goto __skip_base; } snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30); @@ -455,7 +456,7 @@ __skip_base: irq_bits = 0x04; break; default: - snd_printk("WSS irq # %d not valid\n", chip->irq); + snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq); goto __skip_resources; } @@ -470,13 +471,14 @@ __skip_base: dma_bits = 0x03; break; default: - snd_printk("WSS dma1 # %d not valid\n", chip->dma1); + snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", + chip->dma1); goto __skip_resources; } #if defined(CS4231) || defined(OPTi93X) if (chip->dma1 == chip->dma2) { - snd_printk("don't want to share dmas\n"); + snd_printk(KERN_ERR "don't want to share dmas\n"); return -EBUSY; } @@ -485,7 +487,8 @@ __skip_base: case 1: break; default: - snd_printk("WSS dma2 # %d not valid\n", chip->dma2); + snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", + chip->dma2); goto __skip_resources; } dma_bits |= 0x04; @@ -516,7 +519,8 @@ __skip_resources: mpu_port_bits = 0x00; break; default: - snd_printk("MPU-401 port 0x%lx not valid\n", + snd_printk(KERN_WARNING + "MPU-401 port 0x%lx not valid\n", chip->mpu_port); goto __skip_mpu; } @@ -535,7 +539,7 @@ __skip_resources: mpu_irq_bits = 0x01; break; default: - snd_printk("MPU-401 irq # %d not valid\n", + snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n", chip->mpu_irq); goto __skip_mpu; } @@ -726,7 +730,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) if (chip->wss_base == SNDRV_AUTO_PORT) { chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4); if (chip->wss_base < 0) { - snd_printk("unable to find a free WSS port\n"); + snd_printk(KERN_ERR "unable to find a free WSS port\n"); return -EBUSY; } } @@ -891,7 +895,7 @@ static int __devinit snd_opti9xx_isa_probe(struct device *devptr, #if defined(CS4231) || defined(OPTi93X) if (dma2 == SNDRV_AUTO_DMA) { if ((dma2 = snd_legacy_find_free_dma(possible_dma2s[dma1 % 4])) < 0) { - snd_printk("unable to find a free DMA2\n"); + snd_printk(KERN_ERR "unable to find a free DMA2\n"); return -EBUSY; } } diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index 4c095bc7c729..c280e6220aee 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -551,11 +551,11 @@ static int __devinit snd_wavefront_isa_match(struct device *pdev, return 0; #endif if (cs4232_pcm_port[dev] == SNDRV_AUTO_PORT) { - snd_printk("specify CS4232 port\n"); + snd_printk(KERN_ERR "specify CS4232 port\n"); return 0; } if (ics2115_port[dev] == SNDRV_AUTO_PORT) { - snd_printk("specify ICS2115 port\n"); + snd_printk(KERN_ERR "specify ICS2115 port\n"); return 0; } return 1; diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c index 4c410820a994..beb312cca75b 100644 --- a/sound/isa/wavefront/wavefront_synth.c +++ b/sound/isa/wavefront/wavefront_synth.c @@ -633,7 +633,7 @@ wavefront_get_sample_status (snd_wavefront_t *dev, int assume_rom) wbuf[1] = i >> 7; if (snd_wavefront_cmd (dev, WFC_IDENTIFY_SAMPLE_TYPE, rbuf, wbuf)) { - snd_printk("cannot identify sample " + snd_printk(KERN_WARNING "cannot identify sample " "type of slot %d\n", i); dev->sample_status[i] = WF_ST_EMPTY; continue; -- cgit v1.2.3 From 54530bded6ecf22d683423b66fc3cd6dddb249aa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:55:18 +0100 Subject: ALSA: usb - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 6 ++++-- sound/usb/usbmixer.c | 5 ++++- sound/usb/usx2y/usb_stream.c | 2 +- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 4636926d12d7..c69cc6e4f549 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1419,9 +1419,11 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) subs->cur_audiofmt = fmt; #if 0 - printk("setting done: format = %d, rate = %d..%d, channels = %d\n", + printk(KERN_DEBUG + "setting done: format = %d, rate = %d..%d, channels = %d\n", fmt->format, fmt->rate_min, fmt->rate_max, fmt->channels); - printk(" datapipe = 0x%0x, syncpipe = 0x%0x\n", + printk(KERN_DEBUG + " datapipe = 0x%0x, syncpipe = 0x%0x\n", subs->datapipe, subs->syncpipe); #endif diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 330f2fbff2d1..6615cd3b4079 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -222,7 +222,10 @@ static int check_ignored_ctl(struct mixer_build *state, int unitid, int control) for (p = state->map; p->id; p++) { if (p->id == unitid && ! p->name && (! control || ! p->control || control == p->control)) { - // printk("ignored control %d:%d\n", unitid, control); + /* + printk(KERN_DEBUG "ignored control %d:%d\n", + unitid, control); + */ return 1; } } diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c index 70b96355ca4c..24393dafcb6e 100644 --- a/sound/usb/usx2y/usb_stream.c +++ b/sound/usb/usx2y/usb_stream.c @@ -557,7 +557,7 @@ static void stream_start(struct usb_stream_kernel *sk, s->idle_insize -= max_diff - max_diff_0; s->idle_insize += urb_size - s->period_size; if (s->idle_insize < 0) { - snd_printk("%i %i %i\n", + snd_printk(KERN_WARNING "%i %i %i\n", s->idle_insize, urb_size, s->period_size); return; } else if (s->idle_insize == 0) { -- cgit v1.2.3 From 939778aedd9386e13051a9e1d57c14cba2b6ae13 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:57:55 +0100 Subject: ALSA: hda - Add missing KERN_* prefix to printk ... and disable the annoying debug message. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5218118f01b0..d2812ab729cc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8265,7 +8265,7 @@ static void alc888_6st_dell_unsol_event(struct hda_codec *codec, { switch (res >> 26) { case ALC880_HP_EVENT: - printk("hp_event\n"); + /* printk(KERN_DEBUG "hp_event\n"); */ alc888_6st_dell_front_automute(codec); break; } @@ -16564,7 +16564,7 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin, if (alc880_is_fixed_pin(pin)) { nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin)); - /* printk("DAC nid=%x\n",nid); */ + /* printk(KERN_DEBUG "DAC nid=%x\n",nid); */ /* specify the DAC as the extra output */ if (!spec->multiout.hp_nid) spec->multiout.hp_nid = nid; -- cgit v1.2.3 From 006de267351aa3d836f3307370eae7ec16eac09d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:51:04 +0100 Subject: ALSA: Add missing KERN_* prefix to printk in sound/core Signed-off-by: Takashi Iwai --- sound/core/oss/pcm_oss.c | 49 +++++++++++++++++++++++-------------- sound/core/oss/pcm_plugin.h | 4 +-- sound/core/pcm_native.c | 6 ++--- sound/core/seq/oss/seq_oss_device.h | 2 +- sound/core/seq/seq_prioq.c | 3 ++- 5 files changed, 39 insertions(+), 25 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index e17836680f49..4b883595a85a 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1160,9 +1160,11 @@ snd_pcm_sframes_t snd_pcm_oss_write3(struct snd_pcm_substream *substream, const runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) { #ifdef OSS_DEBUG if (runtime->status->state == SNDRV_PCM_STATE_XRUN) - printk("pcm_oss: write: recovering from XRUN\n"); + printk(KERN_DEBUG "pcm_oss: write: " + "recovering from XRUN\n"); else - printk("pcm_oss: write: recovering from SUSPEND\n"); + printk(KERN_DEBUG "pcm_oss: write: " + "recovering from SUSPEND\n"); #endif ret = snd_pcm_oss_prepare(substream); if (ret < 0) @@ -1196,9 +1198,11 @@ snd_pcm_sframes_t snd_pcm_oss_read3(struct snd_pcm_substream *substream, char *p runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) { #ifdef OSS_DEBUG if (runtime->status->state == SNDRV_PCM_STATE_XRUN) - printk("pcm_oss: read: recovering from XRUN\n"); + printk(KERN_DEBUG "pcm_oss: read: " + "recovering from XRUN\n"); else - printk("pcm_oss: read: recovering from SUSPEND\n"); + printk(KERN_DEBUG "pcm_oss: read: " + "recovering from SUSPEND\n"); #endif ret = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DRAIN, NULL); if (ret < 0) @@ -1242,9 +1246,11 @@ snd_pcm_sframes_t snd_pcm_oss_writev3(struct snd_pcm_substream *substream, void runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) { #ifdef OSS_DEBUG if (runtime->status->state == SNDRV_PCM_STATE_XRUN) - printk("pcm_oss: writev: recovering from XRUN\n"); + printk(KERN_DEBUG "pcm_oss: writev: " + "recovering from XRUN\n"); else - printk("pcm_oss: writev: recovering from SUSPEND\n"); + printk(KERN_DEBUG "pcm_oss: writev: " + "recovering from SUSPEND\n"); #endif ret = snd_pcm_oss_prepare(substream); if (ret < 0) @@ -1278,9 +1284,11 @@ snd_pcm_sframes_t snd_pcm_oss_readv3(struct snd_pcm_substream *substream, void * runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) { #ifdef OSS_DEBUG if (runtime->status->state == SNDRV_PCM_STATE_XRUN) - printk("pcm_oss: readv: recovering from XRUN\n"); + printk(KERN_DEBUG "pcm_oss: readv: " + "recovering from XRUN\n"); else - printk("pcm_oss: readv: recovering from SUSPEND\n"); + printk(KERN_DEBUG "pcm_oss: readv: " + "recovering from SUSPEND\n"); #endif ret = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DRAIN, NULL); if (ret < 0) @@ -1533,7 +1541,7 @@ static int snd_pcm_oss_sync1(struct snd_pcm_substream *substream, size_t size) init_waitqueue_entry(&wait, current); add_wait_queue(&runtime->sleep, &wait); #ifdef OSS_DEBUG - printk("sync1: size = %li\n", size); + printk(KERN_DEBUG "sync1: size = %li\n", size); #endif while (1) { result = snd_pcm_oss_write2(substream, runtime->oss.buffer, size, 1); @@ -1590,7 +1598,7 @@ static int snd_pcm_oss_sync(struct snd_pcm_oss_file *pcm_oss_file) mutex_lock(&runtime->oss.params_lock); if (runtime->oss.buffer_used > 0) { #ifdef OSS_DEBUG - printk("sync: buffer_used\n"); + printk(KERN_DEBUG "sync: buffer_used\n"); #endif size = (8 * (runtime->oss.period_bytes - runtime->oss.buffer_used) + 7) / width; snd_pcm_format_set_silence(format, @@ -1603,7 +1611,7 @@ static int snd_pcm_oss_sync(struct snd_pcm_oss_file *pcm_oss_file) } } else if (runtime->oss.period_ptr > 0) { #ifdef OSS_DEBUG - printk("sync: period_ptr\n"); + printk(KERN_DEBUG "sync: period_ptr\n"); #endif size = runtime->oss.period_bytes - runtime->oss.period_ptr; snd_pcm_format_set_silence(format, @@ -1952,7 +1960,7 @@ static int snd_pcm_oss_set_trigger(struct snd_pcm_oss_file *pcm_oss_file, int tr int err, cmd; #ifdef OSS_DEBUG - printk("pcm_oss: trigger = 0x%x\n", trigger); + printk(KERN_DEBUG "pcm_oss: trigger = 0x%x\n", trigger); #endif psubstream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK]; @@ -2170,7 +2178,9 @@ static int snd_pcm_oss_get_space(struct snd_pcm_oss_file *pcm_oss_file, int stre } #ifdef OSS_DEBUG - printk("pcm_oss: space: bytes = %i, fragments = %i, fragstotal = %i, fragsize = %i\n", info.bytes, info.fragments, info.fragstotal, info.fragsize); + printk(KERN_DEBUG "pcm_oss: space: bytes = %i, fragments = %i, " + "fragstotal = %i, fragsize = %i\n", + info.bytes, info.fragments, info.fragstotal, info.fragsize); #endif if (copy_to_user(_info, &info, sizeof(info))) return -EFAULT; @@ -2473,7 +2483,7 @@ static long snd_pcm_oss_ioctl(struct file *file, unsigned int cmd, unsigned long if (((cmd >> 8) & 0xff) != 'P') return -EINVAL; #ifdef OSS_DEBUG - printk("pcm_oss: ioctl = 0x%x\n", cmd); + printk(KERN_DEBUG "pcm_oss: ioctl = 0x%x\n", cmd); #endif switch (cmd) { case SNDCTL_DSP_RESET: @@ -2627,7 +2637,8 @@ static ssize_t snd_pcm_oss_read(struct file *file, char __user *buf, size_t coun #else { ssize_t res = snd_pcm_oss_read1(substream, buf, count); - printk("pcm_oss: read %li bytes (returned %li bytes)\n", (long)count, (long)res); + printk(KERN_DEBUG "pcm_oss: read %li bytes " + "(returned %li bytes)\n", (long)count, (long)res); return res; } #endif @@ -2646,7 +2657,8 @@ static ssize_t snd_pcm_oss_write(struct file *file, const char __user *buf, size substream->f_flags = file->f_flags & O_NONBLOCK; result = snd_pcm_oss_write1(substream, buf, count); #ifdef OSS_DEBUG - printk("pcm_oss: write %li bytes (wrote %li bytes)\n", (long)count, (long)result); + printk(KERN_DEBUG "pcm_oss: write %li bytes (wrote %li bytes)\n", + (long)count, (long)result); #endif return result; } @@ -2720,7 +2732,7 @@ static int snd_pcm_oss_mmap(struct file *file, struct vm_area_struct *area) int err; #ifdef OSS_DEBUG - printk("pcm_oss: mmap begin\n"); + printk(KERN_DEBUG "pcm_oss: mmap begin\n"); #endif pcm_oss_file = file->private_data; switch ((area->vm_flags & (VM_READ | VM_WRITE))) { @@ -2770,7 +2782,8 @@ static int snd_pcm_oss_mmap(struct file *file, struct vm_area_struct *area) runtime->silence_threshold = 0; runtime->silence_size = 0; #ifdef OSS_DEBUG - printk("pcm_oss: mmap ok, bytes = 0x%x\n", runtime->oss.mmap_bytes); + printk(KERN_DEBUG "pcm_oss: mmap ok, bytes = 0x%x\n", + runtime->oss.mmap_bytes); #endif /* In mmap mode we never stop */ runtime->stop_threshold = runtime->boundary; diff --git a/sound/core/oss/pcm_plugin.h b/sound/core/oss/pcm_plugin.h index ca2f4c39be46..b9afab603711 100644 --- a/sound/core/oss/pcm_plugin.h +++ b/sound/core/oss/pcm_plugin.h @@ -176,9 +176,9 @@ static inline int snd_pcm_plug_slave_format(int format, struct snd_mask *format_ #endif #ifdef PLUGIN_DEBUG -#define pdprintf( fmt, args... ) printk( "plugin: " fmt, ##args) +#define pdprintf(fmt, args...) printk(KERN_DEBUG "plugin: " fmt, ##args) #else -#define pdprintf( fmt, args... ) +#define pdprintf(fmt, args...) #endif #endif /* __PCM_PLUGIN_H */ diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index a789efc9df39..d9b8f5379428 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -186,7 +186,7 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream, if (!(params->rmask & (1 << k))) continue; #ifdef RULES_DEBUG - printk("%s = ", snd_pcm_hw_param_names[k]); + printk(KERN_DEBUG "%s = ", snd_pcm_hw_param_names[k]); printk("%04x%04x%04x%04x -> ", m->bits[3], m->bits[2], m->bits[1], m->bits[0]); #endif changed = snd_mask_refine(m, constrs_mask(constrs, k)); @@ -206,7 +206,7 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream, if (!(params->rmask & (1 << k))) continue; #ifdef RULES_DEBUG - printk("%s = ", snd_pcm_hw_param_names[k]); + printk(KERN_DEBUG "%s = ", snd_pcm_hw_param_names[k]); if (i->empty) printk("empty"); else @@ -251,7 +251,7 @@ int snd_pcm_hw_refine(struct snd_pcm_substream *substream, if (!doit) continue; #ifdef RULES_DEBUG - printk("Rule %d [%p]: ", k, r->func); + printk(KERN_DEBUG "Rule %d [%p]: ", k, r->func); if (r->var >= 0) { printk("%s = ", snd_pcm_hw_param_names[r->var]); if (hw_is_mask(r->var)) { diff --git a/sound/core/seq/oss/seq_oss_device.h b/sound/core/seq/oss/seq_oss_device.h index bf8d2b4cb15e..c0154a959d55 100644 --- a/sound/core/seq/oss/seq_oss_device.h +++ b/sound/core/seq/oss/seq_oss_device.h @@ -181,7 +181,7 @@ char *enabled_str(int bool); /* for debug */ #ifdef SNDRV_SEQ_OSS_DEBUG extern int seq_oss_debug; -#define debug_printk(x) do { if (seq_oss_debug > 0) snd_printk x; } while (0) +#define debug_printk(x) do { if (seq_oss_debug > 0) snd_printd x; } while (0) #else #define debug_printk(x) /**/ #endif diff --git a/sound/core/seq/seq_prioq.c b/sound/core/seq/seq_prioq.c index 0101a8b99b73..29896ab23403 100644 --- a/sound/core/seq/seq_prioq.c +++ b/sound/core/seq/seq_prioq.c @@ -321,7 +321,8 @@ void snd_seq_prioq_leave(struct snd_seq_prioq * f, int client, int timestamp) freeprev = cell; } else { #if 0 - printk("type = %i, source = %i, dest = %i, client = %i\n", + printk(KERN_DEBUG "type = %i, source = %i, dest = %i, " + "client = %i\n", cell->event.type, cell->event.source.client, cell->event.dest.client, -- cgit v1.2.3 From 45203832df2fa9e94ca0a249ddb20d2b077e58cc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 15:51:50 +0100 Subject: ALSA: Add missing KERN_* prefix to printk in sound/drivers Signed-off-by: Takashi Iwai --- sound/drivers/mtpav.c | 12 +++++++----- sound/drivers/mts64.c | 2 +- sound/drivers/opl3/opl3_lib.c | 2 +- sound/drivers/opl3/opl3_midi.c | 30 +++++++++++++++--------------- sound/drivers/opl3/opl3_oss.c | 8 +++++--- sound/drivers/opl3/opl3_synth.c | 2 +- sound/drivers/pcsp/pcsp.c | 2 +- sound/drivers/serial-u16550.c | 18 ++++++++++++------ sound/drivers/virmidi.c | 4 +++- sound/drivers/vx/vx_core.c | 3 ++- 10 files changed, 48 insertions(+), 35 deletions(-) diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index 5b89c0883d60..6b26305ff0e6 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -303,8 +303,10 @@ static void snd_mtpav_output_port_write(struct mtpav *mtp_card, snd_mtpav_send_byte(mtp_card, 0xf5); snd_mtpav_send_byte(mtp_card, portp->hwport); - //snd_printk("new outport: 0x%x\n", (unsigned int) portp->hwport); - + /* + snd_printk(KERN_DEBUG "new outport: 0x%x\n", + (unsigned int) portp->hwport); + */ if (!(outbyte & 0x80) && portp->running_status) snd_mtpav_send_byte(mtp_card, portp->running_status); } @@ -540,7 +542,7 @@ static void snd_mtpav_read_bytes(struct mtpav *mcrd) u8 sbyt = snd_mtpav_getreg(mcrd, SREG); - //printk("snd_mtpav_read_bytes() sbyt: 0x%x\n", sbyt); + /* printk(KERN_DEBUG "snd_mtpav_read_bytes() sbyt: 0x%x\n", sbyt); */ if (!(sbyt & SIGS_BYTE)) return; @@ -585,12 +587,12 @@ static irqreturn_t snd_mtpav_irqh(int irq, void *dev_id) static int __devinit snd_mtpav_get_ISA(struct mtpav * mcard) { if ((mcard->res_port = request_region(port, 3, "MotuMTPAV MIDI")) == NULL) { - snd_printk("MTVAP port 0x%lx is busy\n", port); + snd_printk(KERN_ERR "MTVAP port 0x%lx is busy\n", port); return -EBUSY; } mcard->port = port; if (request_irq(irq, snd_mtpav_irqh, IRQF_DISABLED, "MOTU MTPAV", mcard)) { - snd_printk("MTVAP IRQ %d busy\n", irq); + snd_printk(KERN_ERR "MTVAP IRQ %d busy\n", irq); return -EBUSY; } mcard->irq = irq; diff --git a/sound/drivers/mts64.c b/sound/drivers/mts64.c index 87ba1ddc0115..1a05b2d64c9b 100644 --- a/sound/drivers/mts64.c +++ b/sound/drivers/mts64.c @@ -1015,7 +1015,7 @@ static int __devinit snd_mts64_probe(struct platform_device *pdev) goto __err; } - snd_printk("ESI Miditerminal 4140 on 0x%lx\n", p->base); + snd_printk(KERN_INFO "ESI Miditerminal 4140 on 0x%lx\n", p->base); return 0; __err: diff --git a/sound/drivers/opl3/opl3_lib.c b/sound/drivers/opl3/opl3_lib.c index 780582340fef..6e31e46ca393 100644 --- a/sound/drivers/opl3/opl3_lib.c +++ b/sound/drivers/opl3/opl3_lib.c @@ -302,7 +302,7 @@ void snd_opl3_interrupt(struct snd_hwdep * hw) opl3 = hw->private_data; status = inb(opl3->l_port); #if 0 - snd_printk("AdLib IRQ status = 0x%x\n", status); + snd_printk(KERN_DEBUG "AdLib IRQ status = 0x%x\n", status); #endif if (!(status & 0x80)) return; diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c index 16feafa2c51e..6e7d09ae0e82 100644 --- a/sound/drivers/opl3/opl3_midi.c +++ b/sound/drivers/opl3/opl3_midi.c @@ -125,7 +125,7 @@ static void debug_alloc(struct snd_opl3 *opl3, char *s, int voice) { int i; char *str = "x.24"; - printk("time %.5i: %s [%.2i]: ", opl3->use_time, s, voice); + printk(KERN_DEBUG "time %.5i: %s [%.2i]: ", opl3->use_time, s, voice); for (i = 0; i < opl3->max_voices; i++) printk("%c", *(str + opl3->voices[i].state + 1)); printk("\n"); @@ -218,7 +218,7 @@ static int opl3_get_voice(struct snd_opl3 *opl3, int instr_4op, for (i = 0; i < END; i++) { if (best[i].voice >= 0) { #ifdef DEBUG_ALLOC - printk("%s %iop allocation on voice %i\n", + printk(KERN_DEBUG "%s %iop allocation on voice %i\n", alloc_type[i], instr_4op ? 4 : 2, best[i].voice); #endif @@ -317,7 +317,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan) opl3 = p; #ifdef DEBUG_MIDI - snd_printk("Note on, ch %i, inst %i, note %i, vel %i\n", + snd_printk(KERN_DEBUG "Note on, ch %i, inst %i, note %i, vel %i\n", chan->number, chan->midi_program, note, vel); #endif @@ -372,7 +372,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan) return; } #ifdef DEBUG_MIDI - snd_printk(" --> OPL%i instrument: %s\n", + snd_printk(KERN_DEBUG " --> OPL%i instrument: %s\n", instr_4op ? 3 : 2, patch->name); #endif /* in SYNTH mode, application takes care of voices */ @@ -431,7 +431,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan) } #ifdef DEBUG_MIDI - snd_printk(" --> setting OPL3 connection: 0x%x\n", + snd_printk(KERN_DEBUG " --> setting OPL3 connection: 0x%x\n", opl3->connection_reg); #endif /* @@ -466,7 +466,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan) /* Program the FM voice characteristics */ for (i = 0; i < (instr_4op ? 4 : 2); i++) { #ifdef DEBUG_MIDI - snd_printk(" --> programming operator %i\n", i); + snd_printk(KERN_DEBUG " --> programming operator %i\n", i); #endif op_offset = snd_opl3_regmap[voice_offset][i]; @@ -546,7 +546,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan) blocknum |= OPL3_KEYON_BIT; #ifdef DEBUG_MIDI - snd_printk(" --> trigger voice %i\n", voice); + snd_printk(KERN_DEBUG " --> trigger voice %i\n", voice); #endif /* Set OPL3 KEYON_BLOCK register of requested voice */ opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); @@ -602,7 +602,7 @@ void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan) prg = extra_prg - 1; } #ifdef DEBUG_MIDI - snd_printk(" *** allocating extra program\n"); + snd_printk(KERN_DEBUG " *** allocating extra program\n"); #endif goto __extra_prg; } @@ -633,7 +633,7 @@ static void snd_opl3_kill_voice(struct snd_opl3 *opl3, int voice) /* kill voice */ #ifdef DEBUG_MIDI - snd_printk(" --> kill voice %i\n", voice); + snd_printk(KERN_DEBUG " --> kill voice %i\n", voice); #endif opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); /* clear Key ON bit */ @@ -670,7 +670,7 @@ void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan opl3 = p; #ifdef DEBUG_MIDI - snd_printk("Note off, ch %i, inst %i, note %i\n", + snd_printk(KERN_DEBUG "Note off, ch %i, inst %i, note %i\n", chan->number, chan->midi_program, note); #endif @@ -709,7 +709,7 @@ void snd_opl3_key_press(void *p, int note, int vel, struct snd_midi_channel *cha opl3 = p; #ifdef DEBUG_MIDI - snd_printk("Key pressure, ch#: %i, inst#: %i\n", + snd_printk(KERN_DEBUG "Key pressure, ch#: %i, inst#: %i\n", chan->number, chan->midi_program); #endif } @@ -723,7 +723,7 @@ void snd_opl3_terminate_note(void *p, int note, struct snd_midi_channel *chan) opl3 = p; #ifdef DEBUG_MIDI - snd_printk("Terminate note, ch#: %i, inst#: %i\n", + snd_printk(KERN_DEBUG "Terminate note, ch#: %i, inst#: %i\n", chan->number, chan->midi_program); #endif } @@ -812,7 +812,7 @@ void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan) opl3 = p; #ifdef DEBUG_MIDI - snd_printk("Controller, TYPE = %i, ch#: %i, inst#: %i\n", + snd_printk(KERN_DEBUG "Controller, TYPE = %i, ch#: %i, inst#: %i\n", type, chan->number, chan->midi_program); #endif @@ -849,7 +849,7 @@ void snd_opl3_nrpn(void *p, struct snd_midi_channel *chan, opl3 = p; #ifdef DEBUG_MIDI - snd_printk("NRPN, ch#: %i, inst#: %i\n", + snd_printk(KERN_DEBUG "NRPN, ch#: %i, inst#: %i\n", chan->number, chan->midi_program); #endif } @@ -864,6 +864,6 @@ void snd_opl3_sysex(void *p, unsigned char *buf, int len, opl3 = p; #ifdef DEBUG_MIDI - snd_printk("SYSEX\n"); + snd_printk(KERN_DEBUG "SYSEX\n"); #endif } diff --git a/sound/drivers/opl3/opl3_oss.c b/sound/drivers/opl3/opl3_oss.c index 9a2271dc046a..a54b1dc5cc78 100644 --- a/sound/drivers/opl3/opl3_oss.c +++ b/sound/drivers/opl3/opl3_oss.c @@ -220,14 +220,14 @@ static int snd_opl3_load_patch_seq_oss(struct snd_seq_oss_arg *arg, int format, return -EINVAL; if (count < (int)sizeof(sbi)) { - snd_printk("FM Error: Patch record too short\n"); + snd_printk(KERN_ERR "FM Error: Patch record too short\n"); return -EINVAL; } if (copy_from_user(&sbi, buf, sizeof(sbi))) return -EFAULT; if (sbi.channel < 0 || sbi.channel >= SBFM_MAXINSTR) { - snd_printk("FM Error: Invalid instrument number %d\n", + snd_printk(KERN_ERR "FM Error: Invalid instrument number %d\n", sbi.channel); return -EINVAL; } @@ -254,7 +254,9 @@ static int snd_opl3_ioctl_seq_oss(struct snd_seq_oss_arg *arg, unsigned int cmd, opl3 = arg->private_data; switch (cmd) { case SNDCTL_FM_LOAD_INSTR: - snd_printk("OPL3: Obsolete ioctl(SNDCTL_FM_LOAD_INSTR) used. Fix the program.\n"); + snd_printk(KERN_ERR "OPL3: " + "Obsolete ioctl(SNDCTL_FM_LOAD_INSTR) used. " + "Fix the program.\n"); return -EINVAL; case SNDCTL_SYNTH_MEMAVL: diff --git a/sound/drivers/opl3/opl3_synth.c b/sound/drivers/opl3/opl3_synth.c index 962bb9c8b9c8..6d57b6441dec 100644 --- a/sound/drivers/opl3/opl3_synth.c +++ b/sound/drivers/opl3/opl3_synth.c @@ -168,7 +168,7 @@ int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, #ifdef CONFIG_SND_DEBUG default: - snd_printk("unknown IOCTL: 0x%x\n", cmd); + snd_printk(KERN_WARNING "unknown IOCTL: 0x%x\n", cmd); #endif } return -ENOTTY; diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c index a4049eb94d35..c7c744c6fc0b 100644 --- a/sound/drivers/pcsp/pcsp.c +++ b/sound/drivers/pcsp/pcsp.c @@ -57,7 +57,7 @@ static int __devinit snd_pcsp_create(struct snd_card *card) else min_div = MAX_DIV; #if PCSP_DEBUG - printk("PCSP: lpj=%li, min_div=%i, res=%li\n", + printk(KERN_DEBUG "PCSP: lpj=%li, min_div=%i, res=%li\n", loops_per_jiffy, min_div, tp.tv_nsec); #endif diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index d8aab9da97c2..ff0a41510945 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -241,7 +241,8 @@ static void snd_uart16550_io_loop(struct snd_uart16550 * uart) snd_rawmidi_receive(uart->midi_input[substream], &c, 1); if (status & UART_LSR_OE) - snd_printk("%s: Overrun on device at 0x%lx\n", + snd_printk(KERN_WARNING + "%s: Overrun on device at 0x%lx\n", uart->rmidi->name, uart->base); } @@ -636,7 +637,8 @@ static int snd_uart16550_output_byte(struct snd_uart16550 *uart, } } else { if (!snd_uart16550_write_buffer(uart, midi_byte)) { - snd_printk("%s: Buffer overrun on device at 0x%lx\n", + snd_printk(KERN_WARNING + "%s: Buffer overrun on device at 0x%lx\n", uart->rmidi->name, uart->base); return 0; } @@ -815,7 +817,8 @@ static int __devinit snd_uart16550_create(struct snd_card *card, if (irq >= 0 && irq != SNDRV_AUTO_IRQ) { if (request_irq(irq, snd_uart16550_interrupt, IRQF_DISABLED, "Serial MIDI", uart)) { - snd_printk("irq %d busy. Using Polling.\n", irq); + snd_printk(KERN_WARNING + "irq %d busy. Using Polling.\n", irq); } else { uart->irq = irq; } @@ -919,19 +922,22 @@ static int __devinit snd_serial_probe(struct platform_device *devptr) case SNDRV_SERIAL_GENERIC: break; default: - snd_printk("Adaptor type is out of range 0-%d (%d)\n", + snd_printk(KERN_ERR + "Adaptor type is out of range 0-%d (%d)\n", SNDRV_SERIAL_MAX_ADAPTOR, adaptor[dev]); return -ENODEV; } if (outs[dev] < 1 || outs[dev] > SNDRV_SERIAL_MAX_OUTS) { - snd_printk("Count of outputs is out of range 1-%d (%d)\n", + snd_printk(KERN_ERR + "Count of outputs is out of range 1-%d (%d)\n", SNDRV_SERIAL_MAX_OUTS, outs[dev]); return -ENODEV; } if (ins[dev] < 1 || ins[dev] > SNDRV_SERIAL_MAX_INS) { - snd_printk("Count of inputs is out of range 1-%d (%d)\n", + snd_printk(KERN_ERR + "Count of inputs is out of range 1-%d (%d)\n", SNDRV_SERIAL_MAX_INS, ins[dev]); return -ENODEV; } diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c index f79e3614079d..1022e365606f 100644 --- a/sound/drivers/virmidi.c +++ b/sound/drivers/virmidi.c @@ -98,7 +98,9 @@ static int __devinit snd_virmidi_probe(struct platform_device *devptr) vmidi->card = card; if (midi_devs[dev] > MAX_MIDI_DEVICES) { - snd_printk("too much midi devices for virmidi %d: force to use %d\n", dev, MAX_MIDI_DEVICES); + snd_printk(KERN_WARNING + "too much midi devices for virmidi %d: " + "force to use %d\n", dev, MAX_MIDI_DEVICES); midi_devs[dev] = MAX_MIDI_DEVICES; } for (idx = 0; idx < midi_devs[dev]; idx++) { diff --git a/sound/drivers/vx/vx_core.c b/sound/drivers/vx/vx_core.c index 14e3354be43a..19c6e376c7c7 100644 --- a/sound/drivers/vx/vx_core.c +++ b/sound/drivers/vx/vx_core.c @@ -688,7 +688,8 @@ int snd_vx_dsp_load(struct vx_core *chip, const struct firmware *dsp) image = dsp->data + i; /* Wait DSP ready for a new read */ if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) { - printk("dsp loading error at position %d\n", i); + printk(KERN_ERR + "dsp loading error at position %d\n", i); return err; } cptr = image; -- cgit v1.2.3 From 42b0158bdb1344b05cc1e98c363fba9e97137565 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:01:46 +0100 Subject: ALSA: emux - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/synth/emux/emux_oss.c | 2 +- sound/synth/emux/emux_seq.c | 16 ++++++++-------- sound/synth/emux/emux_synth.c | 6 ++++-- sound/synth/emux/soundfont.c | 28 +++++++++++++++++----------- 4 files changed, 30 insertions(+), 22 deletions(-) diff --git a/sound/synth/emux/emux_oss.c b/sound/synth/emux/emux_oss.c index 5c47b6c09264..87e42206c4ef 100644 --- a/sound/synth/emux/emux_oss.c +++ b/sound/synth/emux/emux_oss.c @@ -132,7 +132,7 @@ snd_emux_open_seq_oss(struct snd_seq_oss_arg *arg, void *closure) p = snd_emux_create_port(emu, tmpname, 32, 1, &callback); if (p == NULL) { - snd_printk("can't create port\n"); + snd_printk(KERN_ERR "can't create port\n"); snd_emux_dec_count(emu); mutex_unlock(&emu->register_mutex); return -ENOMEM; diff --git a/sound/synth/emux/emux_seq.c b/sound/synth/emux/emux_seq.c index 335aa2ce2574..ca5f7effb4df 100644 --- a/sound/synth/emux/emux_seq.c +++ b/sound/synth/emux/emux_seq.c @@ -74,15 +74,15 @@ snd_emux_init_seq(struct snd_emux *emu, struct snd_card *card, int index) emu->client = snd_seq_create_kernel_client(card, index, "%s WaveTable", emu->name); if (emu->client < 0) { - snd_printk("can't create client\n"); + snd_printk(KERN_ERR "can't create client\n"); return -ENODEV; } if (emu->num_ports < 0) { - snd_printk("seqports must be greater than zero\n"); + snd_printk(KERN_WARNING "seqports must be greater than zero\n"); emu->num_ports = 1; } else if (emu->num_ports >= SNDRV_EMUX_MAX_PORTS) { - snd_printk("too many ports." + snd_printk(KERN_WARNING "too many ports." "limited max. ports %d\n", SNDRV_EMUX_MAX_PORTS); emu->num_ports = SNDRV_EMUX_MAX_PORTS; } @@ -100,7 +100,7 @@ snd_emux_init_seq(struct snd_emux *emu, struct snd_card *card, int index) p = snd_emux_create_port(emu, tmpname, MIDI_CHANNELS, 0, &pinfo); if (p == NULL) { - snd_printk("can't create port\n"); + snd_printk(KERN_ERR "can't create port\n"); return -ENOMEM; } @@ -147,12 +147,12 @@ snd_emux_create_port(struct snd_emux *emu, char *name, /* Allocate structures for this channel */ if ((p = kzalloc(sizeof(*p), GFP_KERNEL)) == NULL) { - snd_printk("no memory\n"); + snd_printk(KERN_ERR "no memory\n"); return NULL; } p->chset.channels = kcalloc(max_channels, sizeof(struct snd_midi_channel), GFP_KERNEL); if (p->chset.channels == NULL) { - snd_printk("no memory\n"); + snd_printk(KERN_ERR "no memory\n"); kfree(p); return NULL; } @@ -376,12 +376,12 @@ int snd_emux_init_virmidi(struct snd_emux *emu, struct snd_card *card) goto __error; } emu->vmidi[i] = rmidi; - //snd_printk("virmidi %d ok\n", i); + /* snd_printk(KERN_DEBUG "virmidi %d ok\n", i); */ } return 0; __error: - //snd_printk("error init..\n"); + /* snd_printk(KERN_DEBUG "error init..\n"); */ snd_emux_delete_virmidi(emu); return -ENOMEM; } diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c index 2cc6f6f79065..3e921b386fd5 100644 --- a/sound/synth/emux/emux_synth.c +++ b/sound/synth/emux/emux_synth.c @@ -956,7 +956,8 @@ void snd_emux_lock_voice(struct snd_emux *emu, int voice) if (emu->voices[voice].state == SNDRV_EMUX_ST_OFF) emu->voices[voice].state = SNDRV_EMUX_ST_LOCKED; else - snd_printk("invalid voice for lock %d (state = %x)\n", + snd_printk(KERN_WARNING + "invalid voice for lock %d (state = %x)\n", voice, emu->voices[voice].state); spin_unlock_irqrestore(&emu->voice_lock, flags); } @@ -973,7 +974,8 @@ void snd_emux_unlock_voice(struct snd_emux *emu, int voice) if (emu->voices[voice].state == SNDRV_EMUX_ST_LOCKED) emu->voices[voice].state = SNDRV_EMUX_ST_OFF; else - snd_printk("invalid voice for unlock %d (state = %x)\n", + snd_printk(KERN_WARNING + "invalid voice for unlock %d (state = %x)\n", voice, emu->voices[voice].state); spin_unlock_irqrestore(&emu->voice_lock, flags); } diff --git a/sound/synth/emux/soundfont.c b/sound/synth/emux/soundfont.c index 36d53bd317ed..63c8f45c0c22 100644 --- a/sound/synth/emux/soundfont.c +++ b/sound/synth/emux/soundfont.c @@ -133,7 +133,7 @@ snd_soundfont_load(struct snd_sf_list *sflist, const void __user *data, int rc; if (count < (long)sizeof(patch)) { - snd_printk("patch record too small %ld\n", count); + snd_printk(KERN_ERR "patch record too small %ld\n", count); return -EINVAL; } if (copy_from_user(&patch, data, sizeof(patch))) @@ -143,15 +143,16 @@ snd_soundfont_load(struct snd_sf_list *sflist, const void __user *data, data += sizeof(patch); if (patch.key != SNDRV_OSS_SOUNDFONT_PATCH) { - snd_printk("'The wrong kind of patch' %x\n", patch.key); + snd_printk(KERN_ERR "The wrong kind of patch %x\n", patch.key); return -EINVAL; } if (count < patch.len) { - snd_printk("Patch too short %ld, need %d\n", count, patch.len); + snd_printk(KERN_ERR "Patch too short %ld, need %d\n", + count, patch.len); return -EINVAL; } if (patch.len < 0) { - snd_printk("poor length %d\n", patch.len); + snd_printk(KERN_ERR "poor length %d\n", patch.len); return -EINVAL; } @@ -195,7 +196,8 @@ snd_soundfont_load(struct snd_sf_list *sflist, const void __user *data, case SNDRV_SFNT_REMOVE_INFO: /* patch must be opened */ if (!sflist->currsf) { - snd_printk("soundfont: remove_info: patch not opened\n"); + snd_printk(KERN_ERR "soundfont: remove_info: " + "patch not opened\n"); rc = -EINVAL; } else { int bank, instr; @@ -531,7 +533,7 @@ load_info(struct snd_sf_list *sflist, const void __user *data, long count) return -EINVAL; if (count < (long)sizeof(hdr)) { - printk("Soundfont error: invalid patch zone length\n"); + printk(KERN_ERR "Soundfont error: invalid patch zone length\n"); return -EINVAL; } if (copy_from_user((char*)&hdr, data, sizeof(hdr))) @@ -541,12 +543,14 @@ load_info(struct snd_sf_list *sflist, const void __user *data, long count) count -= sizeof(hdr); if (hdr.nvoices <= 0 || hdr.nvoices >= 100) { - printk("Soundfont error: Illegal voice number %d\n", hdr.nvoices); + printk(KERN_ERR "Soundfont error: Illegal voice number %d\n", + hdr.nvoices); return -EINVAL; } if (count < (long)sizeof(struct soundfont_voice_info) * hdr.nvoices) { - printk("Soundfont Error: patch length(%ld) is smaller than nvoices(%d)\n", + printk(KERN_ERR "Soundfont Error: " + "patch length(%ld) is smaller than nvoices(%d)\n", count, hdr.nvoices); return -EINVAL; } @@ -952,7 +956,7 @@ load_guspatch(struct snd_sf_list *sflist, const char __user *data, int rc; if (count < (long)sizeof(patch)) { - snd_printk("patch record too small %ld\n", count); + snd_printk(KERN_ERR "patch record too small %ld\n", count); return -EINVAL; } if (copy_from_user(&patch, data, sizeof(patch))) @@ -1034,7 +1038,8 @@ load_guspatch(struct snd_sf_list *sflist, const char __user *data, /* panning position; -128 - 127 => 0-127 */ zone->v.pan = (patch.panning + 128) / 2; #if 0 - snd_printk("gus: basefrq=%d (ofs=%d) root=%d,tune=%d, range:%d-%d\n", + snd_printk(KERN_DEBUG + "gus: basefrq=%d (ofs=%d) root=%d,tune=%d, range:%d-%d\n", (int)patch.base_freq, zone->v.rate_offset, zone->v.root, zone->v.tune, zone->v.low, zone->v.high); #endif @@ -1068,7 +1073,8 @@ load_guspatch(struct snd_sf_list *sflist, const char __user *data, zone->v.parm.volrelease = 0x8000 | snd_sf_calc_parm_decay(release); zone->v.attenuation = calc_gus_attenuation(patch.env_offset[0]); #if 0 - snd_printk("gus: atkhld=%x, dcysus=%x, volrel=%x, att=%d\n", + snd_printk(KERN_DEBUG + "gus: atkhld=%x, dcysus=%x, volrel=%x, att=%d\n", zone->v.parm.volatkhld, zone->v.parm.voldcysus, zone->v.parm.volrelease, -- cgit v1.2.3 From e2ea7cfc703cba3299d22db728516a0fc1a9717c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:07:02 +0100 Subject: ALSA: Add missing KERN_* prefix to printk in sound/pci/ice1712 Signed-off-by: Takashi Iwai --- sound/pci/ice1712/ice1712.c | 2 +- sound/pci/ice1712/ice1724.c | 17 ++++++++++++++--- sound/pci/ice1712/juli.c | 5 +++-- sound/pci/ice1712/prodigy192.c | 13 +++++++++---- 4 files changed, 27 insertions(+), 10 deletions(-) diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index 58d7cda03de5..dcd3f4f89b44 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -458,7 +458,7 @@ static irqreturn_t snd_ice1712_interrupt(int irq, void *dev_id) u16 pbkstatus; struct snd_pcm_substream *substream; pbkstatus = inw(ICEDS(ice, INTSTAT)); - /* printk("pbkstatus = 0x%x\n", pbkstatus); */ + /* printk(KERN_DEBUG "pbkstatus = 0x%x\n", pbkstatus); */ for (idx = 0; idx < 6; idx++) { if ((pbkstatus & (3 << (idx * 2))) == 0) continue; diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index eb7872dec5ae..da8c111e9e39 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -756,7 +756,14 @@ static int snd_vt1724_playback_pro_prepare(struct snd_pcm_substream *substream) spin_unlock_irq(&ice->reg_lock); - /* printk("pro prepare: ch = %d, addr = 0x%x, buffer = 0x%x, period = 0x%x\n", substream->runtime->channels, (unsigned int)substream->runtime->dma_addr, snd_pcm_lib_buffer_bytes(substream), snd_pcm_lib_period_bytes(substream)); */ + /* + printk(KERN_DEBUG "pro prepare: ch = %d, addr = 0x%x, " + "buffer = 0x%x, period = 0x%x\n", + substream->runtime->channels, + (unsigned int)substream->runtime->dma_addr, + snd_pcm_lib_buffer_bytes(substream), + snd_pcm_lib_period_bytes(substream)); + */ return 0; } @@ -2133,7 +2140,9 @@ unsigned char snd_vt1724_read_i2c(struct snd_ice1712 *ice, wait_i2c_busy(ice); val = inb(ICEREG1724(ice, I2C_DATA)); mutex_unlock(&ice->i2c_mutex); - /* printk("i2c_read: [0x%x,0x%x] = 0x%x\n", dev, addr, val); */ + /* + printk(KERN_DEBUG "i2c_read: [0x%x,0x%x] = 0x%x\n", dev, addr, val); + */ return val; } @@ -2142,7 +2151,9 @@ void snd_vt1724_write_i2c(struct snd_ice1712 *ice, { mutex_lock(&ice->i2c_mutex); wait_i2c_busy(ice); - /* printk("i2c_write: [0x%x,0x%x] = 0x%x\n", dev, addr, data); */ + /* + printk(KERN_DEBUG "i2c_write: [0x%x,0x%x] = 0x%x\n", dev, addr, data); + */ outb(addr, ICEREG1724(ice, I2C_BYTE_ADDR)); outb(data, ICEREG1724(ice, I2C_DATA)); outb(dev | VT1724_I2C_WRITE, ICEREG1724(ice, I2C_DEV_ADDR)); diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c index c51659b9caf6..fd948bfd9aef 100644 --- a/sound/pci/ice1712/juli.c +++ b/sound/pci/ice1712/juli.c @@ -345,8 +345,9 @@ static int juli_mute_put(struct snd_kcontrol *kcontrol, new_gpio = old_gpio & ~((unsigned int) kcontrol->private_value); } - /* printk("JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, \ - new_gpio 0x%x\n", + /* printk(KERN_DEBUG + "JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, " + "new_gpio 0x%x\n", (unsigned int)ucontrol->value.integer.value[0], old_gpio, new_gpio); */ if (old_gpio != new_gpio) { diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c index 48d3679292a7..2a8e5cd8f2d8 100644 --- a/sound/pci/ice1712/prodigy192.c +++ b/sound/pci/ice1712/prodigy192.c @@ -133,8 +133,10 @@ static int stac9460_dac_mute_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id) + STAC946X_LF_VOLUME; /* due to possible conflicts with stac9460_set_rate_val, mutexing */ mutex_lock(&spec->mute_mutex); - /*printk("Mute put: reg 0x%02x, ctrl value: 0x%02x\n", idx, - ucontrol->value.integer.value[0]);*/ + /* + printk(KERN_DEBUG "Mute put: reg 0x%02x, ctrl value: 0x%02x\n", idx, + ucontrol->value.integer.value[0]); + */ change = stac9460_dac_mute(ice, idx, ucontrol->value.integer.value[0]); mutex_unlock(&spec->mute_mutex); return change; @@ -185,7 +187,10 @@ static int stac9460_dac_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_el change = (ovol != nvol); if (change) { ovol = (0x7f - nvol) | (tmp & 0x80); - /*printk("DAC Volume: reg 0x%02x: 0x%02x\n", idx, ovol);*/ + /* + printk(KERN_DEBUG "DAC Volume: reg 0x%02x: 0x%02x\n", + idx, ovol); + */ stac9460_put(ice, idx, (0x7f - nvol) | (tmp & 0x80)); } return change; @@ -344,7 +349,7 @@ static void stac9460_set_rate_val(struct snd_ice1712 *ice, unsigned int rate) for (idx = 0; idx < 7 ; ++idx) changed[idx] = stac9460_dac_mute(ice, STAC946X_MASTER_VOLUME + idx, 0); - /*printk("Rate change: %d, new MC: 0x%02x\n", rate, new);*/ + /*printk(KERN_DEBUG "Rate change: %d, new MC: 0x%02x\n", rate, new);*/ stac9460_put(ice, STAC946X_MASTER_CLOCKING, new); udelay(10); /* unmuting - only originally unmuted dacs - -- cgit v1.2.3 From 28a97c194cec477073ae341f15b836437d8ef8e5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:08:14 +0100 Subject: ALSA: emu10k1 - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emu10k1_callback.c | 7 ++- sound/pci/emu10k1/emu10k1_main.c | 5 +- sound/pci/emu10k1/emufx.c | 11 ++-- sound/pci/emu10k1/emupcm.c | 37 ++++++++++--- sound/pci/emu10k1/io.c | 4 +- sound/pci/emu10k1/p16v.c | 100 +++++++++++++++++++++++++---------- sound/pci/emu10k1/voice.c | 12 +++-- 7 files changed, 130 insertions(+), 46 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_callback.c b/sound/pci/emu10k1/emu10k1_callback.c index 0e649dcdbf64..7ef949d99a50 100644 --- a/sound/pci/emu10k1/emu10k1_callback.c +++ b/sound/pci/emu10k1/emu10k1_callback.c @@ -103,7 +103,10 @@ snd_emu10k1_synth_get_voice(struct snd_emu10k1 *hw) int ch; vp = &emu->voices[best[i].voice]; if ((ch = vp->ch) < 0) { - //printk("synth_get_voice: ch < 0 (%d) ??", i); + /* + printk(KERN_WARNING + "synth_get_voice: ch < 0 (%d) ??", i); + */ continue; } vp->emu->num_voices--; @@ -335,7 +338,7 @@ start_voice(struct snd_emux_voice *vp) return -EINVAL; emem->map_locked++; if (snd_emu10k1_memblk_map(hw, emem) < 0) { - // printk("emu: cannot map!\n"); + /* printk(KERN_ERR "emu: cannot map!\n"); */ return -ENOMEM; } mapped_offset = snd_emu10k1_memblk_offset(emem) >> 1; diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 7958006a1d66..8343aecbd25f 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -758,7 +758,8 @@ static int emu1010_firmware_thread(void *data) snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n"); snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp); snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2); - snd_printk("Audio Dock ver:%d.%d\n", tmp, tmp2); + snd_printk(KERN_INFO "Audio Dock ver:%d.%d\n", + tmp, tmp2); /* Sync clocking between 1010 and Dock */ /* Allow DLL to settle */ msleep(10); @@ -887,7 +888,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n"); snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp); snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2); - snd_printk("emu1010: Hana version: %d.%d\n", tmp, tmp2); + snd_printk(KERN_INFO "emu1010: Hana version: %d.%d\n", tmp, tmp2); /* Enable 48Volt power to Audio Dock */ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON); diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 7dba08f0ab8e..191e1cd9997d 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -1519,7 +1519,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) /* A_PUT_STEREO_OUTPUT(A_EXTOUT_FRONT_L, A_EXTOUT_FRONT_R, playback + SND_EMU10K1_PLAYBACK_CHANNELS); */ if (emu->card_capabilities->emu_model) { /* EMU1010 Outputs from PCM Front, Rear, Center, LFE, Side */ - snd_printk("EMU outputs on\n"); + snd_printk(KERN_INFO "EMU outputs on\n"); for (z = 0; z < 8; z++) { if (emu->card_capabilities->ca0108_chip) { A_OP(icode, &ptr, iACC3, A3_EMU32OUT(z), A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + z), A_C_00000000, A_C_00000000); @@ -1567,7 +1567,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) if (emu->card_capabilities->emu_model) { if (emu->card_capabilities->ca0108_chip) { - snd_printk("EMU2 inputs on\n"); + snd_printk(KERN_INFO "EMU2 inputs on\n"); for (z = 0; z < 0x10; z++) { snd_emu10k1_audigy_dsp_convert_32_to_2x16( icode, &ptr, tmp, bit_shifter16, @@ -1575,10 +1575,13 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) A_FXBUS2(z*2) ); } } else { - snd_printk("EMU inputs on\n"); + snd_printk(KERN_INFO "EMU inputs on\n"); /* Capture 16 (originally 8) channels of S32_LE sound */ - /* printk("emufx.c: gpr=0x%x, tmp=0x%x\n",gpr, tmp); */ + /* + printk(KERN_DEBUG "emufx.c: gpr=0x%x, tmp=0x%x\n", + gpr, tmp); + */ /* For the EMU1010: How to get 32bit values from the DSP. High 16bits into L, low 16bits into R. */ /* A_P16VIN(0) is delayed by one sample, * so all other A_P16VIN channels will need to also be delayed diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c index cf9276ddad42..78f62fd404c2 100644 --- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -44,7 +44,7 @@ static void snd_emu10k1_pcm_interrupt(struct snd_emu10k1 *emu, if (epcm->substream == NULL) return; #if 0 - printk("IRQ: position = 0x%x, period = 0x%x, size = 0x%x\n", + printk(KERN_DEBUG "IRQ: position = 0x%x, period = 0x%x, size = 0x%x\n", epcm->substream->runtime->hw->pointer(emu, epcm->substream), snd_pcm_lib_period_bytes(epcm->substream), snd_pcm_lib_buffer_bytes(epcm->substream)); @@ -146,7 +146,11 @@ static int snd_emu10k1_pcm_channel_alloc(struct snd_emu10k1_pcm * epcm, int voic 1, &epcm->extra); if (err < 0) { - /* printk("pcm_channel_alloc: failed extra: voices=%d, frame=%d\n", voices, frame); */ + /* + printk(KERN_DEBUG "pcm_channel_alloc: " + "failed extra: voices=%d, frame=%d\n", + voices, frame); + */ for (i = 0; i < voices; i++) { snd_emu10k1_voice_free(epcm->emu, epcm->voices[i]); epcm->voices[i] = NULL; @@ -737,7 +741,10 @@ static int snd_emu10k1_playback_trigger(struct snd_pcm_substream *substream, struct snd_emu10k1_pcm_mixer *mix; int result = 0; - /* printk("trigger - emu10k1 = 0x%x, cmd = %i, pointer = %i\n", (int)emu, cmd, substream->ops->pointer(substream)); */ + /* + printk(KERN_DEBUG "trigger - emu10k1 = 0x%x, cmd = %i, pointer = %i\n", + (int)emu, cmd, substream->ops->pointer(substream)) + */ spin_lock(&emu->reg_lock); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -786,7 +793,10 @@ static int snd_emu10k1_capture_trigger(struct snd_pcm_substream *substream, /* hmm this should cause full and half full interrupt to be raised? */ outl(epcm->capture_ipr, emu->port + IPR); snd_emu10k1_intr_enable(emu, epcm->capture_inte); - /* printk("adccr = 0x%x, adcbs = 0x%x\n", epcm->adccr, epcm->adcbs); */ + /* + printk(KERN_DEBUG "adccr = 0x%x, adcbs = 0x%x\n", + epcm->adccr, epcm->adcbs); + */ switch (epcm->type) { case CAPTURE_AC97ADC: snd_emu10k1_ptr_write(emu, ADCCR, 0, epcm->capture_cr_val); @@ -857,7 +867,11 @@ static snd_pcm_uframes_t snd_emu10k1_playback_pointer(struct snd_pcm_substream * ptr -= runtime->buffer_size; } #endif - /* printk("ptr = 0x%x, buffer_size = 0x%x, period_size = 0x%x\n", ptr, runtime->buffer_size, runtime->period_size); */ + /* + printk(KERN_DEBUG + "ptr = 0x%x, buffer_size = 0x%x, period_size = 0x%x\n", + ptr, runtime->buffer_size, runtime->period_size); + */ return ptr; } @@ -1546,7 +1560,11 @@ static void snd_emu10k1_fx8010_playback_tram_poke1(unsigned short *dst_left, unsigned int count, unsigned int tram_shift) { - /* printk("tram_poke1: dst_left = 0x%p, dst_right = 0x%p, src = 0x%p, count = 0x%x\n", dst_left, dst_right, src, count); */ + /* + printk(KERN_DEBUG "tram_poke1: dst_left = 0x%p, dst_right = 0x%p, " + "src = 0x%p, count = 0x%x\n", + dst_left, dst_right, src, count); + */ if ((tram_shift & 1) == 0) { while (count--) { *dst_left-- = *src++; @@ -1623,7 +1641,12 @@ static int snd_emu10k1_fx8010_playback_prepare(struct snd_pcm_substream *substre struct snd_emu10k1_fx8010_pcm *pcm = &emu->fx8010.pcm[substream->number]; unsigned int i; - /* printk("prepare: etram_pages = 0x%p, dma_area = 0x%x, buffer_size = 0x%x (0x%x)\n", emu->fx8010.etram_pages, runtime->dma_area, runtime->buffer_size, runtime->buffer_size << 2); */ + /* + printk(KERN_DEBUG "prepare: etram_pages = 0x%p, dma_area = 0x%x, " + "buffer_size = 0x%x (0x%x)\n", + emu->fx8010.etram_pages, runtime->dma_area, + runtime->buffer_size, runtime->buffer_size << 2); + */ memset(&pcm->pcm_rec, 0, sizeof(pcm->pcm_rec)); pcm->pcm_rec.hw_buffer_size = pcm->buffer_size * 2; /* byte size */ pcm->pcm_rec.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream); diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index b5a802bdeb7c..4bfc31d1b281 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -226,7 +226,9 @@ int snd_emu10k1_i2c_write(struct snd_emu10k1 *emu, break; if (timeout > 1000) { - snd_printk("emu10k1:I2C:timeout status=0x%x\n", status); + snd_printk(KERN_WARNING + "emu10k1:I2C:timeout status=0x%x\n", + status); break; } } diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c index 749a21b6bd06..e617acaf10e3 100644 --- a/sound/pci/emu10k1/p16v.c +++ b/sound/pci/emu10k1/p16v.c @@ -168,7 +168,7 @@ static void snd_p16v_pcm_free_substream(struct snd_pcm_runtime *runtime) struct snd_emu10k1_pcm *epcm = runtime->private_data; if (epcm) { - //snd_printk("epcm free: %p\n", epcm); + /* snd_printk(KERN_DEBUG "epcm free: %p\n", epcm); */ kfree(epcm); } } @@ -183,14 +183,16 @@ static int snd_p16v_pcm_open_playback_channel(struct snd_pcm_substream *substrea int err; epcm = kzalloc(sizeof(*epcm), GFP_KERNEL); - //snd_printk("epcm kcalloc: %p\n", epcm); + /* snd_printk(KERN_DEBUG "epcm kcalloc: %p\n", epcm); */ if (epcm == NULL) return -ENOMEM; epcm->emu = emu; epcm->substream = substream; - //snd_printk("epcm device=%d, channel_id=%d\n", substream->pcm->device, channel_id); - + /* + snd_printk(KERN_DEBUG "epcm device=%d, channel_id=%d\n", + substream->pcm->device, channel_id); + */ runtime->private_data = epcm; runtime->private_free = snd_p16v_pcm_free_substream; @@ -200,10 +202,15 @@ static int snd_p16v_pcm_open_playback_channel(struct snd_pcm_substream *substrea channel->number = channel_id; channel->use=1; - //snd_printk("p16v: open channel_id=%d, channel=%p, use=0x%x\n", channel_id, channel, channel->use); - //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel); - //channel->interrupt = snd_p16v_pcm_channel_interrupt; - channel->epcm=epcm; +#if 0 /* debug */ + snd_printk(KERN_DEBUG + "p16v: open channel_id=%d, channel=%p, use=0x%x\n", + channel_id, channel, channel->use); + printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n", + channel_id, chip, channel); +#endif /* debug */ + /* channel->interrupt = snd_p16v_pcm_channel_interrupt; */ + channel->epcm = epcm; if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) return err; @@ -224,14 +231,16 @@ static int snd_p16v_pcm_open_capture_channel(struct snd_pcm_substream *substream int err; epcm = kzalloc(sizeof(*epcm), GFP_KERNEL); - //snd_printk("epcm kcalloc: %p\n", epcm); + /* snd_printk(KERN_DEBUG "epcm kcalloc: %p\n", epcm); */ if (epcm == NULL) return -ENOMEM; epcm->emu = emu; epcm->substream = substream; - //snd_printk("epcm device=%d, channel_id=%d\n", substream->pcm->device, channel_id); - + /* + snd_printk(KERN_DEBUG "epcm device=%d, channel_id=%d\n", + substream->pcm->device, channel_id); + */ runtime->private_data = epcm; runtime->private_free = snd_p16v_pcm_free_substream; @@ -241,10 +250,15 @@ static int snd_p16v_pcm_open_capture_channel(struct snd_pcm_substream *substream channel->number = channel_id; channel->use=1; - //snd_printk("p16v: open channel_id=%d, channel=%p, use=0x%x\n", channel_id, channel, channel->use); - //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel); - //channel->interrupt = snd_p16v_pcm_channel_interrupt; - channel->epcm=epcm; +#if 0 /* debug */ + snd_printk(KERN_DEBUG + "p16v: open channel_id=%d, channel=%p, use=0x%x\n", + channel_id, channel, channel->use); + printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n", + channel_id, chip, channel); +#endif /* debug */ + /* channel->interrupt = snd_p16v_pcm_channel_interrupt; */ + channel->epcm = epcm; if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) return err; @@ -334,9 +348,19 @@ static int snd_p16v_pcm_prepare_playback(struct snd_pcm_substream *substream) int i; u32 tmp; - //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1)); - //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base); - //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->p16v_buffer.addr, emu->p16v_buffer.area, emu->p16v_buffer.bytes); +#if 0 /* debug */ + snd_printk(KERN_DEBUG "prepare:channel_number=%d, rate=%d, " + "format=0x%x, channels=%d, buffer_size=%ld, " + "period_size=%ld, periods=%u, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, runtime->channels, + runtime->buffer_size, runtime->period_size, + runtime->periods, frames_to_bytes(runtime, 1)); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n", + runtime->dma_addr, runtime->dma_area, table_base); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", + emu->p16v_buffer.addr, emu->p16v_buffer.area, + emu->p16v_buffer.bytes); +#endif /* debug */ tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, channel); switch (runtime->rate) { case 44100: @@ -379,7 +403,15 @@ static int snd_p16v_pcm_prepare_capture(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; int channel = substream->pcm->device - emu->p16v_device_offset; u32 tmp; - //printk("prepare capture:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, frames_to_bytes(runtime, 1)); + + /* + printk(KERN_DEBUG "prepare capture:channel_number=%d, rate=%d, " + "format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, " + "frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, runtime->channels, + runtime->buffer_size, runtime->period_size, + frames_to_bytes(runtime, 1)); + */ tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, channel); switch (runtime->rate) { case 44100: @@ -459,13 +491,13 @@ static int snd_p16v_pcm_trigger_playback(struct snd_pcm_substream *substream, runtime = s->runtime; epcm = runtime->private_data; channel = substream->pcm->device-emu->p16v_device_offset; - //snd_printk("p16v channel=%d\n",channel); + /* snd_printk(KERN_DEBUG "p16v channel=%d\n", channel); */ epcm->running = running; basic |= (0x1<buffer_size; printk(KERN_WARNING "buffer capture limited!\n"); } - //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate); - + /* + printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, " + "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", + ptr1, ptr2, ptr, (int)runtime->buffer_size, + (int)runtime->period_size, (int)runtime->frame_bits, + (int)runtime->rate); + */ return ptr; } @@ -592,7 +629,10 @@ int snd_p16v_free(struct snd_emu10k1 *chip) // release the data if (chip->p16v_buffer.area) { snd_dma_free_pages(&chip->p16v_buffer); - //snd_printk("period lables free: %p\n", &chip->p16v_buffer); + /* + snd_printk(KERN_DEBUG "period lables free: %p\n", + &chip->p16v_buffer); + */ } return 0; } @@ -604,7 +644,7 @@ int __devinit snd_p16v_pcm(struct snd_emu10k1 *emu, int device, struct snd_pcm * int err; int capture=1; - //snd_printk("snd_p16v_pcm called. device=%d\n", device); + /* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */ emu->p16v_device_offset = device; if (rpcm) *rpcm = NULL; @@ -631,7 +671,10 @@ int __devinit snd_p16v_pcm(struct snd_emu10k1 *emu, int device, struct snd_pcm * snd_dma_pci_data(emu->pci), ((65536 - 64) * 8), ((65536 - 64) * 8))) < 0) return err; - //snd_printk("preallocate playback substream: err=%d\n", err); + /* + snd_printk(KERN_DEBUG + "preallocate playback substream: err=%d\n", err); + */ } for (substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; @@ -642,7 +685,10 @@ int __devinit snd_p16v_pcm(struct snd_emu10k1 *emu, int device, struct snd_pcm * snd_dma_pci_data(emu->pci), 65536 - 64, 65536 - 64)) < 0) return err; - //snd_printk("preallocate capture substream: err=%d\n", err); + /* + snd_printk(KERN_DEBUG + "preallocate capture substream: err=%d\n", err); + */ } if (rpcm) diff --git a/sound/pci/emu10k1/voice.c b/sound/pci/emu10k1/voice.c index d7300a1aa262..20b8da250bd0 100644 --- a/sound/pci/emu10k1/voice.c +++ b/sound/pci/emu10k1/voice.c @@ -53,7 +53,10 @@ static int voice_alloc(struct snd_emu10k1 *emu, int type, int number, *rvoice = NULL; first_voice = last_voice = 0; for (i = emu->next_free_voice, j = 0; j < NUM_G ; i += number, j += number) { - // printk("i %d j %d next free %d!\n", i, j, emu->next_free_voice); + /* + printk(KERN_DEBUG "i %d j %d next free %d!\n", + i, j, emu->next_free_voice); + */ i %= NUM_G; /* stereo voices must be even/odd */ @@ -71,7 +74,7 @@ static int voice_alloc(struct snd_emu10k1 *emu, int type, int number, } } if (!skip) { - // printk("allocated voice %d\n", i); + /* printk(KERN_DEBUG "allocated voice %d\n", i); */ first_voice = i; last_voice = (i + number) % NUM_G; emu->next_free_voice = last_voice; @@ -84,7 +87,10 @@ static int voice_alloc(struct snd_emu10k1 *emu, int type, int number, for (i = 0; i < number; i++) { voice = &emu->voices[(first_voice + i) % NUM_G]; - // printk("voice alloc - %i, %i of %i\n", voice->number, idx-first_voice+1, number); + /* + printk(kERN_DEBUG "voice alloc - %i, %i of %i\n", + voice->number, idx-first_voice+1, number); + */ voice->use = 1; switch (type) { case EMU10K1_PCM: -- cgit v1.2.3 From 14ab08610971eb1db572ad8ca63acd13bc4d4caf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:09:57 +0100 Subject: ALSA: intel8x0 - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 11 +++++++---- sound/pci/intel8x0m.c | 14 ++++++++++---- 2 files changed, 17 insertions(+), 8 deletions(-) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index b13ef1e2a4a3..0f7d12911904 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -689,7 +689,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich bdbar[idx + 1] = cpu_to_le32(0x80000000 | /* interrupt on completion */ ichdev->fragsize >> ichdev->pos_shift); #if 0 - printk("bdbar[%i] = 0x%x [0x%x]\n", + printk(KERN_DEBUG "bdbar[%i] = 0x%x [0x%x]\n", idx + 0, bdbar[idx + 0], bdbar[idx + 1]); #endif } @@ -701,8 +701,10 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich ichdev->lvi_frag = ICH_REG_LVI_MASK % ichdev->frags; ichdev->position = 0; #if 0 - printk("lvi_frag = %i, frags = %i, period_size = 0x%x, period_size1 = 0x%x\n", - ichdev->lvi_frag, ichdev->frags, ichdev->fragsize, ichdev->fragsize1); + printk(KERN_DEBUG "lvi_frag = %i, frags = %i, period_size = 0x%x, " + "period_size1 = 0x%x\n", + ichdev->lvi_frag, ichdev->frags, ichdev->fragsize, + ichdev->fragsize1); #endif /* clear interrupts */ iputbyte(chip, port + ichdev->roff_sr, ICH_FIFOE | ICH_BCIS | ICH_LVBCI); @@ -768,7 +770,8 @@ static inline void snd_intel8x0_update(struct intel8x0 *chip, struct ichdev *ich ichdev->lvi_frag %= ichdev->frags; ichdev->bdbar[ichdev->lvi * 2] = cpu_to_le32(ichdev->physbuf + ichdev->lvi_frag * ichdev->fragsize1); #if 0 - printk("new: bdbar[%i] = 0x%x [0x%x], prefetch = %i, all = 0x%x, 0x%x\n", + printk(KERN_DEBUG "new: bdbar[%i] = 0x%x [0x%x], prefetch = %i, " + "all = 0x%x, 0x%x\n", ichdev->lvi * 2, ichdev->bdbar[ichdev->lvi * 2], ichdev->bdbar[ichdev->lvi * 2 + 1], inb(ICH_REG_OFF_PIV + port), inl(port + 4), inb(port + ICH_REG_OFF_CR)); diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c index 93449e464566..7c819fd824a5 100644 --- a/sound/pci/intel8x0m.c +++ b/sound/pci/intel8x0m.c @@ -411,7 +411,10 @@ static void snd_intel8x0_setup_periods(struct intel8x0m *chip, struct ichdev *ic bdbar[idx + 0] = cpu_to_le32(ichdev->physbuf + (((idx >> 1) * ichdev->fragsize) % ichdev->size)); bdbar[idx + 1] = cpu_to_le32(0x80000000 | /* interrupt on completion */ ichdev->fragsize >> chip->pcm_pos_shift); - // printk("bdbar[%i] = 0x%x [0x%x]\n", idx + 0, bdbar[idx + 0], bdbar[idx + 1]); + /* + printk(KERN_DEBUG "bdbar[%i] = 0x%x [0x%x]\n", + idx + 0, bdbar[idx + 0], bdbar[idx + 1]); + */ } ichdev->frags = ichdev->size / ichdev->fragsize; } @@ -421,8 +424,10 @@ static void snd_intel8x0_setup_periods(struct intel8x0m *chip, struct ichdev *ic ichdev->lvi_frag = ICH_REG_LVI_MASK % ichdev->frags; ichdev->position = 0; #if 0 - printk("lvi_frag = %i, frags = %i, period_size = 0x%x, period_size1 = 0x%x\n", - ichdev->lvi_frag, ichdev->frags, ichdev->fragsize, ichdev->fragsize1); + printk(KERN_DEBUG "lvi_frag = %i, frags = %i, period_size = 0x%x, " + "period_size1 = 0x%x\n", + ichdev->lvi_frag, ichdev->frags, ichdev->fragsize, + ichdev->fragsize1); #endif /* clear interrupts */ iputbyte(chip, port + ichdev->roff_sr, ICH_FIFOE | ICH_BCIS | ICH_LVBCI); @@ -465,7 +470,8 @@ static inline void snd_intel8x0_update(struct intel8x0m *chip, struct ichdev *ic ichdev->lvi_frag * ichdev->fragsize1); #if 0 - printk("new: bdbar[%i] = 0x%x [0x%x], prefetch = %i, all = 0x%x, 0x%x\n", + printk(KERN_DEBUG "new: bdbar[%i] = 0x%x [0x%x], " + "prefetch = %i, all = 0x%x, 0x%x\n", ichdev->lvi * 2, ichdev->bdbar[ichdev->lvi * 2], ichdev->bdbar[ichdev->lvi * 2 + 1], inb(ICH_REG_OFF_PIV + port), inl(port + 4), inb(port + ICH_REG_OFF_CR)); -- cgit v1.2.3 From ee419653a38de93b75a577851d9e4003cf0bbe07 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:11:31 +0100 Subject: ALSA: Fix missing KERN_* prefix to printk in sound/pci Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 5 +- sound/pci/ak4531_codec.c | 3 +- sound/pci/als300.c | 2 +- sound/pci/au88x0/au88x0_a3d.c | 7 ++- sound/pci/au88x0/au88x0_core.c | 19 +++++-- sound/pci/au88x0/au88x0_synth.c | 39 ++++++++++--- sound/pci/azt3328.c | 8 +-- sound/pci/ca0106/ca0106_main.c | 91 +++++++++++++++++++++++------- sound/pci/cs4281.c | 6 +- sound/pci/cs46xx/cs46xx_lib.c | 6 +- sound/pci/cs46xx/cs46xx_lib.h | 6 +- sound/pci/cs5535audio/cs5535audio.c | 2 +- sound/pci/ens1370.c | 3 +- sound/pci/es1938.c | 23 +++++--- sound/pci/mixart/mixart_hwdep.c | 46 ++++++++------- sound/pci/sonicvibes.c | 109 ++++++++++++++++++++++++------------ sound/pci/trident/trident_main.c | 57 ++++++++++--------- sound/pci/via82xx.c | 5 +- sound/pci/via82xx_modem.c | 5 +- sound/pci/vx222/vx222_ops.c | 8 ++- sound/pci/ymfpci/ymfpci_main.c | 14 ++++- 21 files changed, 318 insertions(+), 146 deletions(-) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index e2b843b4f9d0..bc707b603852 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1643,7 +1643,10 @@ static int snd_ac97_modem_build(struct snd_card *card, struct snd_ac97 * ac97) { int err, idx; - //printk("AC97_GPIO_CFG = %x\n",snd_ac97_read(ac97,AC97_GPIO_CFG)); + /* + printk(KERN_DEBUG "AC97_GPIO_CFG = %x\n", + snd_ac97_read(ac97,AC97_GPIO_CFG)); + */ snd_ac97_write(ac97, AC97_GPIO_CFG, 0xffff & ~(AC97_GPIO_LINE1_OH)); snd_ac97_write(ac97, AC97_GPIO_POLARITY, 0xffff & ~(AC97_GPIO_LINE1_OH)); snd_ac97_write(ac97, AC97_GPIO_STICKY, 0xffff); diff --git a/sound/pci/ak4531_codec.c b/sound/pci/ak4531_codec.c index 0f819ddb3ebf..fd135e3d8a84 100644 --- a/sound/pci/ak4531_codec.c +++ b/sound/pci/ak4531_codec.c @@ -51,7 +51,8 @@ static void snd_ak4531_dump(struct snd_ak4531 *ak4531) int idx; for (idx = 0; idx < 0x19; idx++) - printk("ak4531 0x%x: 0x%x\n", idx, ak4531->regs[idx]); + printk(KERN_DEBUG "ak4531 0x%x: 0x%x\n", + idx, ak4531->regs[idx]); } #endif diff --git a/sound/pci/als300.c b/sound/pci/als300.c index 8df6824b51cd..a2c35c1081c3 100644 --- a/sound/pci/als300.c +++ b/sound/pci/als300.c @@ -91,7 +91,7 @@ #define DEBUG_PLAY_REC 0 #if DEBUG_CALLS -#define snd_als300_dbgcalls(format, args...) printk(format, ##args) +#define snd_als300_dbgcalls(format, args...) printk(KERN_DEBUG format, ##args) #define snd_als300_dbgcallenter() printk(KERN_ERR "--> %s\n", __func__) #define snd_als300_dbgcallleave() printk(KERN_ERR "<-- %s\n", __func__) #else diff --git a/sound/pci/au88x0/au88x0_a3d.c b/sound/pci/au88x0/au88x0_a3d.c index 649849e540d3..f4aa8ff6f5f9 100644 --- a/sound/pci/au88x0/au88x0_a3d.c +++ b/sound/pci/au88x0/au88x0_a3d.c @@ -462,9 +462,10 @@ static void a3dsrc_ZeroSliceIO(a3dsrc_t * a) /* Reset Single A3D source. */ static void a3dsrc_ZeroState(a3dsrc_t * a) { - - //printk("vortex: ZeroState slice: %d, source %d\n", a->slice, a->source); - + /* + printk(KERN_DEBUG "vortex: ZeroState slice: %d, source %d\n", + a->slice, a->source); + */ a3dsrc_SetAtmosState(a, 0, 0, 0, 0); a3dsrc_SetHrtfState(a, A3dHrirZeros, A3dHrirZeros); a3dsrc_SetItdDline(a, A3dItdDlineZeros); diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c index b070e5714514..e6a04d037c15 100644 --- a/sound/pci/au88x0/au88x0_core.c +++ b/sound/pci/au88x0/au88x0_core.c @@ -1135,7 +1135,10 @@ vortex_adbdma_setbuffers(vortex_t * vortex, int adbdma, snd_pcm_sgbuf_get_addr(dma->substream, 0)); break; } - //printk("vortex: cfg0 = 0x%x\nvortex: cfg1=0x%x\n", dma->cfg0, dma->cfg1); + /* + printk(KERN_DEBUG "vortex: cfg0 = 0x%x\nvortex: cfg1=0x%x\n", + dma->cfg0, dma->cfg1); + */ hwwrite(vortex->mmio, VORTEX_ADBDMA_BUFCFG0 + (adbdma << 3), dma->cfg0); hwwrite(vortex->mmio, VORTEX_ADBDMA_BUFCFG1 + (adbdma << 3), dma->cfg1); @@ -1959,7 +1962,7 @@ vortex_connect_codecplay(vortex_t * vortex, int en, unsigned char mixers[]) ADB_CODECOUT(0 + 4)); vortex_connection_mix_adb(vortex, en, 0x11, mixers[3], ADB_CODECOUT(1 + 4)); - //printk("SDAC detected "); + /* printk(KERN_DEBUG "SDAC detected "); */ } #else // Use plain direct output to codec. @@ -2013,7 +2016,11 @@ vortex_adb_checkinout(vortex_t * vortex, int resmap[], int out, int restype) resmap[restype] |= (1 << i); else vortex->dma_adb[i].resources[restype] |= (1 << i); - //printk("vortex: ResManager: type %d out %d\n", restype, i); + /* + printk(KERN_DEBUG + "vortex: ResManager: type %d out %d\n", + restype, i); + */ return i; } } @@ -2024,7 +2031,11 @@ vortex_adb_checkinout(vortex_t * vortex, int resmap[], int out, int restype) for (i = 0; i < qty; i++) { if (resmap[restype] & (1 << i)) { resmap[restype] &= ~(1 << i); - //printk("vortex: ResManager: type %d in %d\n",restype, i); + /* + printk(KERN_DEBUG + "vortex: ResManager: type %d in %d\n", + restype, i); + */ return i; } } diff --git a/sound/pci/au88x0/au88x0_synth.c b/sound/pci/au88x0/au88x0_synth.c index 978b856f5621..2805e34bd41d 100644 --- a/sound/pci/au88x0/au88x0_synth.c +++ b/sound/pci/au88x0/au88x0_synth.c @@ -213,38 +213,59 @@ vortex_wt_SetReg(vortex_t * vortex, unsigned char reg, int wt, switch (reg) { /* Voice specific parameters */ case 0: /* running */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_RUN(wt), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_RUN(wt), (int)val); + */ hwwrite(vortex->mmio, WT_RUN(wt), val); return 0xc; break; case 1: /* param 0 */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_PARM(wt,0), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_PARM(wt,0), (int)val); + */ hwwrite(vortex->mmio, WT_PARM(wt, 0), val); return 0xc; break; case 2: /* param 1 */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_PARM(wt,1), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_PARM(wt,1), (int)val); + */ hwwrite(vortex->mmio, WT_PARM(wt, 1), val); return 0xc; break; case 3: /* param 2 */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_PARM(wt,2), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_PARM(wt,2), (int)val); + */ hwwrite(vortex->mmio, WT_PARM(wt, 2), val); return 0xc; break; case 4: /* param 3 */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_PARM(wt,3), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_PARM(wt,3), (int)val); + */ hwwrite(vortex->mmio, WT_PARM(wt, 3), val); return 0xc; break; case 6: /* mute */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_MUTE(wt), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_MUTE(wt), (int)val); + */ hwwrite(vortex->mmio, WT_MUTE(wt), val); return 0xc; break; case 0xb: { /* delay */ - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", WT_DELAY(wt,0), (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", + WT_DELAY(wt,0), (int)val); + */ hwwrite(vortex->mmio, WT_DELAY(wt, 3), val); hwwrite(vortex->mmio, WT_DELAY(wt, 2), val); hwwrite(vortex->mmio, WT_DELAY(wt, 1), val); @@ -272,7 +293,9 @@ vortex_wt_SetReg(vortex_t * vortex, unsigned char reg, int wt, return 0; break; } - //printk("vortex: WT SetReg(0x%x) = 0x%08x\n", ecx, (int)val); + /* + printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", ecx, (int)val); + */ hwwrite(vortex->mmio, ecx, val); return 1; } diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 333007c523a1..8121763b0c10 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -211,25 +211,25 @@ MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); #endif #if DEBUG_MIXER -#define snd_azf3328_dbgmixer(format, args...) printk(format, ##args) +#define snd_azf3328_dbgmixer(format, args...) printk(KERN_DEBUG format, ##args) #else #define snd_azf3328_dbgmixer(format, args...) #endif #if DEBUG_PLAY_REC -#define snd_azf3328_dbgplay(format, args...) printk(KERN_ERR format, ##args) +#define snd_azf3328_dbgplay(format, args...) printk(KERN_DEBUG format, ##args) #else #define snd_azf3328_dbgplay(format, args...) #endif #if DEBUG_MISC -#define snd_azf3328_dbgtimer(format, args...) printk(KERN_ERR format, ##args) +#define snd_azf3328_dbgtimer(format, args...) printk(KERN_DEBUG format, ##args) #else #define snd_azf3328_dbgtimer(format, args...) #endif #if DEBUG_GAME -#define snd_azf3328_dbggame(format, args...) printk(KERN_ERR format, ##args) +#define snd_azf3328_dbggame(format, args...) printk(KERN_DEBUG format, ##args) #else #define snd_azf3328_dbggame(format, args...) #endif diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 0e62205d4081..f2f8fd17ea4d 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -404,7 +404,9 @@ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, } tmp = reg << 25 | value << 16; - // snd_printk("I2C-write:reg=0x%x, value=0x%x\n", reg, value); + /* + snd_printk(KERN_DEBUG "I2C-write:reg=0x%x, value=0x%x\n", reg, value); + */ /* Not sure what this I2C channel controls. */ /* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */ @@ -422,7 +424,7 @@ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, /* Wait till the transaction ends */ while (1) { status = snd_ca0106_ptr_read(emu, I2C_A, 0); - //snd_printk("I2C:status=0x%x\n", status); + /*snd_printk(KERN_DEBUG "I2C:status=0x%x\n", status);*/ timeout++; if ((status & I2C_A_ADC_START) == 0) break; @@ -521,7 +523,10 @@ static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substr channel->number = channel_id; channel->use = 1; - //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel); + /* + printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n", + channel_id, chip, channel); + */ //channel->interrupt = snd_ca0106_pcm_channel_interrupt; channel->epcm = epcm; if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) @@ -614,7 +619,10 @@ static int snd_ca0106_pcm_open_capture_channel(struct snd_pcm_substream *substre channel->number = channel_id; channel->use = 1; - //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel); + /* + printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n", + channel_id, chip, channel); + */ //channel->interrupt = snd_ca0106_pcm_channel_interrupt; channel->epcm = epcm; if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) @@ -705,9 +713,20 @@ static int snd_ca0106_pcm_prepare_playback(struct snd_pcm_substream *substream) u32 reg71; int i; - //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1)); - //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base); - //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#if 0 /* debug */ + snd_printk(KERN_DEBUG + "prepare:channel_number=%d, rate=%d, format=0x%x, " + "channels=%d, buffer_size=%ld, period_size=%ld, " + "periods=%u, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, + runtime->channels, runtime->buffer_size, + runtime->period_size, runtime->periods, + frames_to_bytes(runtime, 1)); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n", + runtime->dma_addr, runtime->dma_area, table_base); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", + emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#endif /* debug */ /* Rate can be set per channel. */ /* reg40 control host to fifo */ /* reg71 controls DAC rate. */ @@ -799,9 +818,20 @@ static int snd_ca0106_pcm_prepare_capture(struct snd_pcm_substream *substream) u32 reg71_set = 0; u32 reg71; - //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1)); - //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base); - //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#if 0 /* debug */ + snd_printk(KERN_DEBUG + "prepare:channel_number=%d, rate=%d, format=0x%x, " + "channels=%d, buffer_size=%ld, period_size=%ld, " + "periods=%u, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, + runtime->channels, runtime->buffer_size, + runtime->period_size, runtime->periods, + frames_to_bytes(runtime, 1)); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n", + runtime->dma_addr, runtime->dma_area, table_base); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", + emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#endif /* debug */ /* reg71 controls ADC rate. */ switch (runtime->rate) { case 44100: @@ -846,7 +876,14 @@ static int snd_ca0106_pcm_prepare_capture(struct snd_pcm_substream *substream) } - //printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, frames_to_bytes(runtime, 1)); + /* + printk(KERN_DEBUG + "prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, " + "buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, runtime->channels, + runtime->buffer_size, runtime->period_size, + frames_to_bytes(runtime, 1)); + */ snd_ca0106_ptr_write(emu, 0x13, channel, 0); snd_ca0106_ptr_write(emu, CAPTURE_DMA_ADDR, channel, runtime->dma_addr); snd_ca0106_ptr_write(emu, CAPTURE_BUFFER_SIZE, channel, frames_to_bytes(runtime, runtime->buffer_size)<<16); // buffer size in bytes @@ -888,13 +925,13 @@ static int snd_ca0106_pcm_trigger_playback(struct snd_pcm_substream *substream, runtime = s->runtime; epcm = runtime->private_data; channel = epcm->channel_id; - /* snd_printk("channel=%d\n",channel); */ + /* snd_printk(KERN_DEBUG "channel=%d\n", channel); */ epcm->running = running; basic |= (0x1 << channel); extended |= (0x10 << channel); snd_pcm_trigger_done(s, substream); } - /* snd_printk("basic=0x%x, extended=0x%x\n",basic, extended); */ + /* snd_printk(KERN_DEBUG "basic=0x%x, extended=0x%x\n",basic, extended); */ switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -972,8 +1009,13 @@ snd_ca0106_pcm_pointer_playback(struct snd_pcm_substream *substream) ptr=ptr2; if (ptr >= runtime->buffer_size) ptr -= runtime->buffer_size; - //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate); - + /* + printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, " + "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", + ptr1, ptr2, ptr, (int)runtime->buffer_size, + (int)runtime->period_size, (int)runtime->frame_bits, + (int)runtime->rate); + */ return ptr; } @@ -995,8 +1037,13 @@ snd_ca0106_pcm_pointer_capture(struct snd_pcm_substream *substream) ptr=ptr2; if (ptr >= runtime->buffer_size) ptr -= runtime->buffer_size; - //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate); - + /* + printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, " + "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", + ptr1, ptr2, ptr, (int)runtime->buffer_size, + (int)runtime->period_size, (int)runtime->frame_bits, + (int)runtime->rate); + */ return ptr; } @@ -1181,8 +1228,12 @@ static irqreturn_t snd_ca0106_interrupt(int irq, void *dev_id) return IRQ_NONE; stat76 = snd_ca0106_ptr_read(chip, EXTENDED_INT, 0); - //snd_printk("interrupt status = 0x%08x, stat76=0x%08x\n", status, stat76); - //snd_printk("ptr=0x%08x\n",snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0)); + /* + snd_printk(KERN_DEBUG "interrupt status = 0x%08x, stat76=0x%08x\n", + status, stat76); + snd_printk(KERN_DEBUG "ptr=0x%08x\n", + snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0)); + */ mask = 0x11; /* 0x1 for one half, 0x10 for the other half period. */ for(i = 0; i < 4; i++) { pchannel = &(chip->playback_channels[i]); @@ -1470,7 +1521,7 @@ static void ca0106_init_chip(struct snd_ca0106 *chip, int resume) int size, n; size = ARRAY_SIZE(i2c_adc_init); - /* snd_printk("I2C:array size=0x%x\n", size); */ + /* snd_printk(KERN_DEBUG "I2C:array size=0x%x\n", size); */ for (n = 0; n < size; n++) snd_ca0106_i2c_write(chip, i2c_adc_init[n][0], i2c_adc_init[n][1]); diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c index 192e7842e181..415e88f2c62f 100644 --- a/sound/pci/cs4281.c +++ b/sound/pci/cs4281.c @@ -834,7 +834,11 @@ static snd_pcm_uframes_t snd_cs4281_pointer(struct snd_pcm_substream *substream) struct cs4281_dma *dma = runtime->private_data; struct cs4281 *chip = snd_pcm_substream_chip(substream); - // printk("DCC = 0x%x, buffer_size = 0x%x, jiffies = %li\n", snd_cs4281_peekBA0(chip, dma->regDCC), runtime->buffer_size, jiffies); + /* + printk(KERN_DEBUG "DCC = 0x%x, buffer_size = 0x%x, jiffies = %li\n", + snd_cs4281_peekBA0(chip, dma->regDCC), runtime->buffer_size, + jiffies); + */ return runtime->buffer_size - snd_cs4281_peekBA0(chip, dma->regDCC) - 1; } diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index 8ab07aa63652..1be96ead4244 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -194,7 +194,7 @@ static unsigned short snd_cs46xx_codec_read(struct snd_cs46xx *chip, * ACSDA = Status Data Register = 474h */ #if 0 - printk("e) reg = 0x%x, val = 0x%x, BA0_ACCAD = 0x%x\n", reg, + printk(KERN_DEBUG "e) reg = 0x%x, val = 0x%x, BA0_ACCAD = 0x%x\n", reg, snd_cs46xx_peekBA0(chip, BA0_ACSDA), snd_cs46xx_peekBA0(chip, BA0_ACCAD)); #endif @@ -428,8 +428,8 @@ static int cs46xx_wait_for_fifo(struct snd_cs46xx * chip,int retry_timeout) } if(status & SERBST_WBSY) { - snd_printk( KERN_ERR "cs46xx: failure waiting for FIFO command to complete\n"); - + snd_printk(KERN_ERR "cs46xx: failure waiting for " + "FIFO command to complete\n"); return -EINVAL; } diff --git a/sound/pci/cs46xx/cs46xx_lib.h b/sound/pci/cs46xx/cs46xx_lib.h index 018a7de56017..4eb55aa33612 100644 --- a/sound/pci/cs46xx/cs46xx_lib.h +++ b/sound/pci/cs46xx/cs46xx_lib.h @@ -62,7 +62,11 @@ static inline void snd_cs46xx_poke(struct snd_cs46xx *chip, unsigned long reg, u unsigned int bank = reg >> 16; unsigned int offset = reg & 0xffff; - /*if (bank == 0) printk("snd_cs46xx_poke: %04X - %08X\n",reg >> 2,val); */ + /* + if (bank == 0) + printk(KERN_DEBUG "snd_cs46xx_poke: %04X - %08X\n", + reg >> 2,val); + */ writel(val, chip->region.idx[bank+1].remap_addr + offset); } diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c index 826e6dec2e97..6506201d56f6 100644 --- a/sound/pci/cs5535audio/cs5535audio.c +++ b/sound/pci/cs5535audio/cs5535audio.c @@ -312,7 +312,7 @@ static int __devinit snd_cs5535audio_create(struct snd_card *card, if (request_irq(pci->irq, snd_cs5535audio_interrupt, IRQF_SHARED, "CS5535 Audio", cs5535au)) { - snd_printk("unable to grab IRQ %d\n", pci->irq); + snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq); err = -EBUSY; goto sndfail; } diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 9bf95367c882..17674b3406bd 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -584,7 +584,8 @@ static void snd_es1370_codec_write(struct snd_ak4531 *ak4531, unsigned long end_time = jiffies + HZ / 10; #if 0 - printk("CODEC WRITE: reg = 0x%x, val = 0x%x (0x%x), creg = 0x%x\n", + printk(KERN_DEBUG + "CODEC WRITE: reg = 0x%x, val = 0x%x (0x%x), creg = 0x%x\n", reg, val, ES_1370_CODEC_WRITE(reg, val), ES_REG(ensoniq, 1370_CODEC)); #endif do { diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c index 4cd9a1faaecc..e4ba84bed4ad 100644 --- a/sound/pci/es1938.c +++ b/sound/pci/es1938.c @@ -1673,18 +1673,22 @@ static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id) status = inb(SLIO_REG(chip, IRQCONTROL)); #if 0 - printk("Es1938debug - interrupt status: =0x%x\n", status); + printk(KERN_DEBUG "Es1938debug - interrupt status: =0x%x\n", status); #endif /* AUDIO 1 */ if (status & 0x10) { #if 0 - printk("Es1938debug - AUDIO channel 1 interrupt\n"); - printk("Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 interrupt\n"); + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n", inw(SLDM_REG(chip, DMACOUNT))); - printk("Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n", inl(SLDM_REG(chip, DMAADDR))); - printk("Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n", inl(SLDM_REG(chip, DMASTATUS))); #endif /* clear irq */ @@ -1699,10 +1703,13 @@ static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id) /* AUDIO 2 */ if (status & 0x20) { #if 0 - printk("Es1938debug - AUDIO channel 2 interrupt\n"); - printk("Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 2 interrupt\n"); + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n", inw(SLIO_REG(chip, AUDIO2DMACOUNT))); - printk("Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n", + printk(KERN_DEBUG + "Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n", inl(SLIO_REG(chip, AUDIO2DMAADDR))); #endif diff --git a/sound/pci/mixart/mixart_hwdep.c b/sound/pci/mixart/mixart_hwdep.c index 3782b52bc0e8..dda562081d7e 100644 --- a/sound/pci/mixart/mixart_hwdep.c +++ b/sound/pci/mixart/mixart_hwdep.c @@ -345,8 +345,8 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw status_daught = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_DXLX_STATUS_OFFSET )); /* motherboard xilinx status 5 will say that the board is performing a reset */ - if( status_xilinx == 5 ) { - snd_printk( KERN_ERR "miXart is resetting !\n"); + if (status_xilinx == 5) { + snd_printk(KERN_ERR "miXart is resetting !\n"); return -EAGAIN; /* try again later */ } @@ -354,13 +354,14 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw case MIXART_MOTHERBOARD_XLX_INDEX: /* xilinx already loaded ? */ - if( status_xilinx == 4 ) { - snd_printk( KERN_DEBUG "xilinx is already loaded !\n"); + if (status_xilinx == 4) { + snd_printk(KERN_DEBUG "xilinx is already loaded !\n"); return 0; } /* the status should be 0 == "idle" */ - if( status_xilinx != 0 ) { - snd_printk( KERN_ERR "xilinx load error ! status = %d\n", status_xilinx); + if (status_xilinx != 0) { + snd_printk(KERN_ERR "xilinx load error ! status = %d\n", + status_xilinx); return -EIO; /* modprob -r may help ? */ } @@ -389,21 +390,23 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw case MIXART_MOTHERBOARD_ELF_INDEX: - if( status_elf == 4 ) { - snd_printk( KERN_DEBUG "elf file already loaded !\n"); + if (status_elf == 4) { + snd_printk(KERN_DEBUG "elf file already loaded !\n"); return 0; } /* the status should be 0 == "idle" */ - if( status_elf != 0 ) { - snd_printk( KERN_ERR "elf load error ! status = %d\n", status_elf); + if (status_elf != 0) { + snd_printk(KERN_ERR "elf load error ! status = %d\n", + status_elf); return -EIO; /* modprob -r may help ? */ } /* wait for xilinx status == 4 */ err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET, 1, 4, 500); /* 5sec */ if (err < 0) { - snd_printk( KERN_ERR "xilinx was not loaded or could not be started\n"); + snd_printk(KERN_ERR "xilinx was not loaded or " + "could not be started\n"); return err; } @@ -424,7 +427,7 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw /* wait for elf status == 4 */ err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET, 1, 4, 300); /* 3sec */ if (err < 0) { - snd_printk( KERN_ERR "elf could not be started\n"); + snd_printk(KERN_ERR "elf could not be started\n"); return err; } @@ -437,15 +440,16 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw default: /* elf and xilinx should be loaded */ - if( (status_elf != 4) || (status_xilinx != 4) ) { - printk( KERN_ERR "xilinx or elf not successfully loaded\n"); + if (status_elf != 4 || status_xilinx != 4) { + printk(KERN_ERR "xilinx or elf not " + "successfully loaded\n"); return -EIO; /* modprob -r may help ? */ } /* wait for daughter detection != 0 */ err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET, 0, 0, 30); /* 300msec */ if (err < 0) { - snd_printk( KERN_ERR "error starting elf file\n"); + snd_printk(KERN_ERR "error starting elf file\n"); return err; } @@ -460,8 +464,9 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw return -EINVAL; /* daughter should be idle */ - if( status_daught != 0 ) { - printk( KERN_ERR "daughter load error ! status = %d\n", status_daught); + if (status_daught != 0) { + printk(KERN_ERR "daughter load error ! status = %d\n", + status_daught); return -EIO; /* modprob -r may help ? */ } @@ -480,7 +485,7 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw /* wait for status == 2 */ err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 2, 30); /* 300msec */ if (err < 0) { - snd_printk( KERN_ERR "daughter board load error\n"); + snd_printk(KERN_ERR "daughter board load error\n"); return err; } @@ -502,7 +507,8 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw /* wait for daughter status == 3 */ err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 3, 300); /* 3sec */ if (err < 0) { - snd_printk( KERN_ERR "daughter board could not be initialised\n"); + snd_printk(KERN_ERR + "daughter board could not be initialised\n"); return err; } @@ -512,7 +518,7 @@ static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmw /* first communication with embedded */ err = mixart_first_init(mgr); if (err < 0) { - snd_printk( KERN_ERR "miXart could not be set up\n"); + snd_printk(KERN_ERR "miXart could not be set up\n"); return err; } diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index cd408b86c839..e922b1887b1d 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -273,7 +273,8 @@ static inline void snd_sonicvibes_setdmaa(struct sonicvibes * sonic, outl(count, sonic->dmaa_port + SV_DMA_COUNT0); outb(0x18, sonic->dmaa_port + SV_DMA_MODE); #if 0 - printk("program dmaa: addr = 0x%x, paddr = 0x%x\n", addr, inl(sonic->dmaa_port + SV_DMA_ADDR0)); + printk(KERN_DEBUG "program dmaa: addr = 0x%x, paddr = 0x%x\n", + addr, inl(sonic->dmaa_port + SV_DMA_ADDR0)); #endif } @@ -288,7 +289,8 @@ static inline void snd_sonicvibes_setdmac(struct sonicvibes * sonic, outl(count, sonic->dmac_port + SV_DMA_COUNT0); outb(0x14, sonic->dmac_port + SV_DMA_MODE); #if 0 - printk("program dmac: addr = 0x%x, paddr = 0x%x\n", addr, inl(sonic->dmac_port + SV_DMA_ADDR0)); + printk(KERN_DEBUG "program dmac: addr = 0x%x, paddr = 0x%x\n", + addr, inl(sonic->dmac_port + SV_DMA_ADDR0)); #endif } @@ -355,71 +357,104 @@ static unsigned char snd_sonicvibes_in(struct sonicvibes * sonic, unsigned char #if 0 static void snd_sonicvibes_debug(struct sonicvibes * sonic) { - printk("SV REGS: INDEX = 0x%02x ", inb(SV_REG(sonic, INDEX))); + printk(KERN_DEBUG + "SV REGS: INDEX = 0x%02x ", inb(SV_REG(sonic, INDEX))); printk(" STATUS = 0x%02x\n", inb(SV_REG(sonic, STATUS))); - printk(" 0x00: left input = 0x%02x ", snd_sonicvibes_in(sonic, 0x00)); + printk(KERN_DEBUG + " 0x00: left input = 0x%02x ", snd_sonicvibes_in(sonic, 0x00)); printk(" 0x20: synth rate low = 0x%02x\n", snd_sonicvibes_in(sonic, 0x20)); - printk(" 0x01: right input = 0x%02x ", snd_sonicvibes_in(sonic, 0x01)); + printk(KERN_DEBUG + " 0x01: right input = 0x%02x ", snd_sonicvibes_in(sonic, 0x01)); printk(" 0x21: synth rate high = 0x%02x\n", snd_sonicvibes_in(sonic, 0x21)); - printk(" 0x02: left AUX1 = 0x%02x ", snd_sonicvibes_in(sonic, 0x02)); + printk(KERN_DEBUG + " 0x02: left AUX1 = 0x%02x ", snd_sonicvibes_in(sonic, 0x02)); printk(" 0x22: ADC clock = 0x%02x\n", snd_sonicvibes_in(sonic, 0x22)); - printk(" 0x03: right AUX1 = 0x%02x ", snd_sonicvibes_in(sonic, 0x03)); + printk(KERN_DEBUG + " 0x03: right AUX1 = 0x%02x ", snd_sonicvibes_in(sonic, 0x03)); printk(" 0x23: ADC alt rate = 0x%02x\n", snd_sonicvibes_in(sonic, 0x23)); - printk(" 0x04: left CD = 0x%02x ", snd_sonicvibes_in(sonic, 0x04)); + printk(KERN_DEBUG + " 0x04: left CD = 0x%02x ", snd_sonicvibes_in(sonic, 0x04)); printk(" 0x24: ADC pll M = 0x%02x\n", snd_sonicvibes_in(sonic, 0x24)); - printk(" 0x05: right CD = 0x%02x ", snd_sonicvibes_in(sonic, 0x05)); + printk(KERN_DEBUG + " 0x05: right CD = 0x%02x ", snd_sonicvibes_in(sonic, 0x05)); printk(" 0x25: ADC pll N = 0x%02x\n", snd_sonicvibes_in(sonic, 0x25)); - printk(" 0x06: left line = 0x%02x ", snd_sonicvibes_in(sonic, 0x06)); + printk(KERN_DEBUG + " 0x06: left line = 0x%02x ", snd_sonicvibes_in(sonic, 0x06)); printk(" 0x26: Synth pll M = 0x%02x\n", snd_sonicvibes_in(sonic, 0x26)); - printk(" 0x07: right line = 0x%02x ", snd_sonicvibes_in(sonic, 0x07)); + printk(KERN_DEBUG + " 0x07: right line = 0x%02x ", snd_sonicvibes_in(sonic, 0x07)); printk(" 0x27: Synth pll N = 0x%02x\n", snd_sonicvibes_in(sonic, 0x27)); - printk(" 0x08: MIC = 0x%02x ", snd_sonicvibes_in(sonic, 0x08)); + printk(KERN_DEBUG + " 0x08: MIC = 0x%02x ", snd_sonicvibes_in(sonic, 0x08)); printk(" 0x28: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x28)); - printk(" 0x09: Game port = 0x%02x ", snd_sonicvibes_in(sonic, 0x09)); + printk(KERN_DEBUG + " 0x09: Game port = 0x%02x ", snd_sonicvibes_in(sonic, 0x09)); printk(" 0x29: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x29)); - printk(" 0x0a: left synth = 0x%02x ", snd_sonicvibes_in(sonic, 0x0a)); + printk(KERN_DEBUG + " 0x0a: left synth = 0x%02x ", snd_sonicvibes_in(sonic, 0x0a)); printk(" 0x2a: MPU401 = 0x%02x\n", snd_sonicvibes_in(sonic, 0x2a)); - printk(" 0x0b: right synth = 0x%02x ", snd_sonicvibes_in(sonic, 0x0b)); + printk(KERN_DEBUG + " 0x0b: right synth = 0x%02x ", snd_sonicvibes_in(sonic, 0x0b)); printk(" 0x2b: drive ctrl = 0x%02x\n", snd_sonicvibes_in(sonic, 0x2b)); - printk(" 0x0c: left AUX2 = 0x%02x ", snd_sonicvibes_in(sonic, 0x0c)); + printk(KERN_DEBUG + " 0x0c: left AUX2 = 0x%02x ", snd_sonicvibes_in(sonic, 0x0c)); printk(" 0x2c: SRS space = 0x%02x\n", snd_sonicvibes_in(sonic, 0x2c)); - printk(" 0x0d: right AUX2 = 0x%02x ", snd_sonicvibes_in(sonic, 0x0d)); + printk(KERN_DEBUG + " 0x0d: right AUX2 = 0x%02x ", snd_sonicvibes_in(sonic, 0x0d)); printk(" 0x2d: SRS center = 0x%02x\n", snd_sonicvibes_in(sonic, 0x2d)); - printk(" 0x0e: left analog = 0x%02x ", snd_sonicvibes_in(sonic, 0x0e)); + printk(KERN_DEBUG + " 0x0e: left analog = 0x%02x ", snd_sonicvibes_in(sonic, 0x0e)); printk(" 0x2e: wave source = 0x%02x\n", snd_sonicvibes_in(sonic, 0x2e)); - printk(" 0x0f: right analog = 0x%02x ", snd_sonicvibes_in(sonic, 0x0f)); + printk(KERN_DEBUG + " 0x0f: right analog = 0x%02x ", snd_sonicvibes_in(sonic, 0x0f)); printk(" 0x2f: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x2f)); - printk(" 0x10: left PCM = 0x%02x ", snd_sonicvibes_in(sonic, 0x10)); + printk(KERN_DEBUG + " 0x10: left PCM = 0x%02x ", snd_sonicvibes_in(sonic, 0x10)); printk(" 0x30: analog power = 0x%02x\n", snd_sonicvibes_in(sonic, 0x30)); - printk(" 0x11: right PCM = 0x%02x ", snd_sonicvibes_in(sonic, 0x11)); + printk(KERN_DEBUG + " 0x11: right PCM = 0x%02x ", snd_sonicvibes_in(sonic, 0x11)); printk(" 0x31: analog power = 0x%02x\n", snd_sonicvibes_in(sonic, 0x31)); - printk(" 0x12: DMA data format = 0x%02x ", snd_sonicvibes_in(sonic, 0x12)); + printk(KERN_DEBUG + " 0x12: DMA data format = 0x%02x ", snd_sonicvibes_in(sonic, 0x12)); printk(" 0x32: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x32)); - printk(" 0x13: P/C enable = 0x%02x ", snd_sonicvibes_in(sonic, 0x13)); + printk(KERN_DEBUG + " 0x13: P/C enable = 0x%02x ", snd_sonicvibes_in(sonic, 0x13)); printk(" 0x33: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x33)); - printk(" 0x14: U/D button = 0x%02x ", snd_sonicvibes_in(sonic, 0x14)); + printk(KERN_DEBUG + " 0x14: U/D button = 0x%02x ", snd_sonicvibes_in(sonic, 0x14)); printk(" 0x34: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x34)); - printk(" 0x15: revision = 0x%02x ", snd_sonicvibes_in(sonic, 0x15)); + printk(KERN_DEBUG + " 0x15: revision = 0x%02x ", snd_sonicvibes_in(sonic, 0x15)); printk(" 0x35: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x35)); - printk(" 0x16: ADC output ctrl = 0x%02x ", snd_sonicvibes_in(sonic, 0x16)); + printk(KERN_DEBUG + " 0x16: ADC output ctrl = 0x%02x ", snd_sonicvibes_in(sonic, 0x16)); printk(" 0x36: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x36)); - printk(" 0x17: --- = 0x%02x ", snd_sonicvibes_in(sonic, 0x17)); + printk(KERN_DEBUG + " 0x17: --- = 0x%02x ", snd_sonicvibes_in(sonic, 0x17)); printk(" 0x37: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x37)); - printk(" 0x18: DMA A upper cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x18)); + printk(KERN_DEBUG + " 0x18: DMA A upper cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x18)); printk(" 0x38: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x38)); - printk(" 0x19: DMA A lower cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x19)); + printk(KERN_DEBUG + " 0x19: DMA A lower cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x19)); printk(" 0x39: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x39)); - printk(" 0x1a: --- = 0x%02x ", snd_sonicvibes_in(sonic, 0x1a)); + printk(KERN_DEBUG + " 0x1a: --- = 0x%02x ", snd_sonicvibes_in(sonic, 0x1a)); printk(" 0x3a: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x3a)); - printk(" 0x1b: --- = 0x%02x ", snd_sonicvibes_in(sonic, 0x1b)); + printk(KERN_DEBUG + " 0x1b: --- = 0x%02x ", snd_sonicvibes_in(sonic, 0x1b)); printk(" 0x3b: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x3b)); - printk(" 0x1c: DMA C upper cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x1c)); + printk(KERN_DEBUG + " 0x1c: DMA C upper cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x1c)); printk(" 0x3c: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x3c)); - printk(" 0x1d: DMA C upper cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x1d)); + printk(KERN_DEBUG + " 0x1d: DMA C upper cnt = 0x%02x ", snd_sonicvibes_in(sonic, 0x1d)); printk(" 0x3d: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x3d)); - printk(" 0x1e: PCM rate low = 0x%02x ", snd_sonicvibes_in(sonic, 0x1e)); + printk(KERN_DEBUG + " 0x1e: PCM rate low = 0x%02x ", snd_sonicvibes_in(sonic, 0x1e)); printk(" 0x3e: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x3e)); - printk(" 0x1f: PCM rate high = 0x%02x ", snd_sonicvibes_in(sonic, 0x1f)); + printk(KERN_DEBUG + " 0x1f: PCM rate high = 0x%02x ", snd_sonicvibes_in(sonic, 0x1f)); printk(" 0x3f: --- = 0x%02x\n", snd_sonicvibes_in(sonic, 0x3f)); } @@ -476,8 +511,8 @@ static void snd_sonicvibes_pll(unsigned int rate, *res_m = m; *res_n = n; #if 0 - printk("metric = %i, xm = %i, xn = %i\n", metric, xm, xn); - printk("pll: m = 0x%x, r = 0x%x, n = 0x%x\n", reg, m, r, n); + printk(KERN_DEBUG "metric = %i, xm = %i, xn = %i\n", metric, xm, xn); + printk(KERN_DEBUG "pll: m = 0x%x, r = 0x%x, n = 0x%x\n", reg, m, r, n); #endif } diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index c612b435ca2b..a9da9c184660 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -68,40 +68,40 @@ static void snd_trident_print_voice_regs(struct snd_trident *trident, int voice) { unsigned int val, tmp; - printk("Trident voice %i:\n", voice); + printk(KERN_DEBUG "Trident voice %i:\n", voice); outb(voice, TRID_REG(trident, T4D_LFO_GC_CIR)); val = inl(TRID_REG(trident, CH_LBA)); - printk("LBA: 0x%x\n", val); + printk(KERN_DEBUG "LBA: 0x%x\n", val); val = inl(TRID_REG(trident, CH_GVSEL_PAN_VOL_CTRL_EC)); - printk("GVSel: %i\n", val >> 31); - printk("Pan: 0x%x\n", (val >> 24) & 0x7f); - printk("Vol: 0x%x\n", (val >> 16) & 0xff); - printk("CTRL: 0x%x\n", (val >> 12) & 0x0f); - printk("EC: 0x%x\n", val & 0x0fff); + printk(KERN_DEBUG "GVSel: %i\n", val >> 31); + printk(KERN_DEBUG "Pan: 0x%x\n", (val >> 24) & 0x7f); + printk(KERN_DEBUG "Vol: 0x%x\n", (val >> 16) & 0xff); + printk(KERN_DEBUG "CTRL: 0x%x\n", (val >> 12) & 0x0f); + printk(KERN_DEBUG "EC: 0x%x\n", val & 0x0fff); if (trident->device != TRIDENT_DEVICE_ID_NX) { val = inl(TRID_REG(trident, CH_DX_CSO_ALPHA_FMS)); - printk("CSO: 0x%x\n", val >> 16); + printk(KERN_DEBUG "CSO: 0x%x\n", val >> 16); printk("Alpha: 0x%x\n", (val >> 4) & 0x0fff); - printk("FMS: 0x%x\n", val & 0x0f); + printk(KERN_DEBUG "FMS: 0x%x\n", val & 0x0f); val = inl(TRID_REG(trident, CH_DX_ESO_DELTA)); - printk("ESO: 0x%x\n", val >> 16); - printk("Delta: 0x%x\n", val & 0xffff); + printk(KERN_DEBUG "ESO: 0x%x\n", val >> 16); + printk(KERN_DEBUG "Delta: 0x%x\n", val & 0xffff); val = inl(TRID_REG(trident, CH_DX_FMC_RVOL_CVOL)); } else { // TRIDENT_DEVICE_ID_NX val = inl(TRID_REG(trident, CH_NX_DELTA_CSO)); tmp = (val >> 24) & 0xff; - printk("CSO: 0x%x\n", val & 0x00ffffff); + printk(KERN_DEBUG "CSO: 0x%x\n", val & 0x00ffffff); val = inl(TRID_REG(trident, CH_NX_DELTA_ESO)); tmp |= (val >> 16) & 0xff00; - printk("Delta: 0x%x\n", tmp); - printk("ESO: 0x%x\n", val & 0x00ffffff); + printk(KERN_DEBUG "Delta: 0x%x\n", tmp); + printk(KERN_DEBUG "ESO: 0x%x\n", val & 0x00ffffff); val = inl(TRID_REG(trident, CH_NX_ALPHA_FMS_FMC_RVOL_CVOL)); - printk("Alpha: 0x%x\n", val >> 20); - printk("FMS: 0x%x\n", (val >> 16) & 0x0f); + printk(KERN_DEBUG "Alpha: 0x%x\n", val >> 20); + printk(KERN_DEBUG "FMS: 0x%x\n", (val >> 16) & 0x0f); } - printk("FMC: 0x%x\n", (val >> 14) & 3); - printk("RVol: 0x%x\n", (val >> 7) & 0x7f); - printk("CVol: 0x%x\n", val & 0x7f); + printk(KERN_DEBUG "FMC: 0x%x\n", (val >> 14) & 3); + printk(KERN_DEBUG "RVol: 0x%x\n", (val >> 7) & 0x7f); + printk(KERN_DEBUG "CVol: 0x%x\n", val & 0x7f); } #endif @@ -496,12 +496,17 @@ void snd_trident_write_voice_regs(struct snd_trident * trident, outl(regs[4], TRID_REG(trident, CH_START + 16)); #if 0 - printk("written %i channel:\n", voice->number); - printk(" regs[0] = 0x%x/0x%x\n", regs[0], inl(TRID_REG(trident, CH_START + 0))); - printk(" regs[1] = 0x%x/0x%x\n", regs[1], inl(TRID_REG(trident, CH_START + 4))); - printk(" regs[2] = 0x%x/0x%x\n", regs[2], inl(TRID_REG(trident, CH_START + 8))); - printk(" regs[3] = 0x%x/0x%x\n", regs[3], inl(TRID_REG(trident, CH_START + 12))); - printk(" regs[4] = 0x%x/0x%x\n", regs[4], inl(TRID_REG(trident, CH_START + 16))); + printk(KERN_DEBUG "written %i channel:\n", voice->number); + printk(KERN_DEBUG " regs[0] = 0x%x/0x%x\n", + regs[0], inl(TRID_REG(trident, CH_START + 0))); + printk(KERN_DEBUG " regs[1] = 0x%x/0x%x\n", + regs[1], inl(TRID_REG(trident, CH_START + 4))); + printk(KERN_DEBUG " regs[2] = 0x%x/0x%x\n", + regs[2], inl(TRID_REG(trident, CH_START + 8))); + printk(KERN_DEBUG " regs[3] = 0x%x/0x%x\n", + regs[3], inl(TRID_REG(trident, CH_START + 12))); + printk(KERN_DEBUG " regs[4] = 0x%x/0x%x\n", + regs[4], inl(TRID_REG(trident, CH_START + 16))); #endif } @@ -583,7 +588,7 @@ static void snd_trident_write_vol_reg(struct snd_trident * trident, outb(voice->Vol >> 2, TRID_REG(trident, CH_GVSEL_PAN_VOL_CTRL_EC + 2)); break; case TRIDENT_DEVICE_ID_SI7018: - // printk("voice->Vol = 0x%x\n", voice->Vol); + /* printk(KERN_DEBUG "voice->Vol = 0x%x\n", voice->Vol); */ outw((voice->CTRL << 12) | voice->Vol, TRID_REG(trident, CH_GVSEL_PAN_VOL_CTRL_EC)); break; diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 1aafe956ee2b..fc62d6380f86 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -466,7 +466,10 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre flag = VIA_TBL_BIT_FLAG; /* period boundary */ } else flag = 0; /* period continues to the next */ - // printk("via: tbl %d: at %d size %d (rest %d)\n", idx, ofs, r, rest); + /* + printk(KERN_DEBUG "via: tbl %d: at %d size %d " + "(rest %d)\n", idx, ofs, r, rest); + */ ((u32 *)dev->table.area)[(idx<<1) + 1] = cpu_to_le32(r | flag); dev->idx_table[idx].offset = ofs; dev->idx_table[idx].size = r; diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c index 5bd79d2a5a15..c0d9cc9dad44 100644 --- a/sound/pci/via82xx_modem.c +++ b/sound/pci/via82xx_modem.c @@ -328,7 +328,10 @@ static int build_via_table(struct viadev *dev, struct snd_pcm_substream *substre flag = VIA_TBL_BIT_FLAG; /* period boundary */ } else flag = 0; /* period continues to the next */ - // printk("via: tbl %d: at %d size %d (rest %d)\n", idx, ofs, r, rest); + /* + printk(KERN_DEBUG "via: tbl %d: at %d size %d " + "(rest %d)\n", idx, ofs, r, rest); + */ ((u32 *)dev->table.area)[(idx<<1) + 1] = cpu_to_le32(r | flag); dev->idx_table[idx].offset = ofs; dev->idx_table[idx].size = r; diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c index 7e87f398ff0b..c0efe4491116 100644 --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -107,7 +107,9 @@ static unsigned char vx2_inb(struct vx_core *chip, int offset) static void vx2_outb(struct vx_core *chip, int offset, unsigned char val) { outb(val, vx2_reg_addr(chip, offset)); - //printk("outb: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + /* + printk(KERN_DEBUG "outb: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + */ } /** @@ -126,7 +128,9 @@ static unsigned int vx2_inl(struct vx_core *chip, int offset) */ static void vx2_outl(struct vx_core *chip, int offset, unsigned int val) { - // printk("outl: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + /* + printk(KERN_DEBUG "outl: %x -> %x\n", val, vx2_reg_addr(chip, offset)); + */ outl(val, vx2_reg_addr(chip, offset)); } diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index 90d0d62bd0b4..2f0925236a1b 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -318,7 +318,12 @@ static void snd_ymfpci_pcm_interrupt(struct snd_ymfpci *chip, struct snd_ymfpci_ ypcm->period_pos += delta; ypcm->last_pos = pos; if (ypcm->period_pos >= ypcm->period_size) { - // printk("done - active_bank = 0x%x, start = 0x%x\n", chip->active_bank, voice->bank[chip->active_bank].start); + /* + printk(KERN_DEBUG + "done - active_bank = 0x%x, start = 0x%x\n", + chip->active_bank, + voice->bank[chip->active_bank].start); + */ ypcm->period_pos %= ypcm->period_size; spin_unlock(&chip->reg_lock); snd_pcm_period_elapsed(ypcm->substream); @@ -366,7 +371,12 @@ static void snd_ymfpci_pcm_capture_interrupt(struct snd_pcm_substream *substream ypcm->last_pos = pos; if (ypcm->period_pos >= ypcm->period_size) { ypcm->period_pos %= ypcm->period_size; - // printk("done - active_bank = 0x%x, start = 0x%x\n", chip->active_bank, voice->bank[chip->active_bank].start); + /* + printk(KERN_DEBUG + "done - active_bank = 0x%x, start = 0x%x\n", + chip->active_bank, + voice->bank[chip->active_bank].start); + */ spin_unlock(&chip->reg_lock); snd_pcm_period_elapsed(substream); spin_lock(&chip->reg_lock); -- cgit v1.2.3 From 2ebfb8eeb8f244f9d25937d31a947895cf819e26 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:11:58 +0100 Subject: ALSA: Add missing KERN_* prefix to printk in other sound/* Signed-off-by: Takashi Iwai --- sound/arm/sa11xx-uda1341.c | 2 +- sound/mips/au1x00.c | 2 +- sound/pcmcia/pdaudiocf/pdaudiocf_core.c | 23 +++++++++++++++-------- sound/pcmcia/pdaudiocf/pdaudiocf_irq.c | 4 ++-- sound/sparc/amd7930.c | 5 +++-- 5 files changed, 22 insertions(+), 14 deletions(-) diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c index 1dcd51d81d10..ed481a866a3e 100644 --- a/sound/arm/sa11xx-uda1341.c +++ b/sound/arm/sa11xx-uda1341.c @@ -914,7 +914,7 @@ static int __devinit sa11xx_uda1341_probe(struct platform_device *devptr) snd_card_set_dev(card, &devptr->dev); if ((err = snd_card_register(card)) == 0) { - printk( KERN_INFO "iPAQ audio support initialized\n" ); + printk(KERN_INFO "iPAQ audio support initialized\n"); platform_set_drvdata(devptr, card); return 0; } diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c index 1881cec11e78..7c1afc96ab87 100644 --- a/sound/mips/au1x00.c +++ b/sound/mips/au1x00.c @@ -678,7 +678,7 @@ au1000_init(void) return err; } - printk( KERN_INFO "ALSA AC97: Driver Initialized\n" ); + printk(KERN_INFO "ALSA AC97: Driver Initialized\n"); au1000_card = card; return 0; } diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_core.c b/sound/pcmcia/pdaudiocf/pdaudiocf_core.c index dfa40b0ed86d..5d2afa0b0ce4 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_core.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_core.c @@ -82,14 +82,21 @@ static void pdacf_ak4117_write(void *private_data, unsigned char reg, unsigned c #if 0 void pdacf_dump(struct snd_pdacf *chip) { - printk("PDAUDIOCF DUMP (0x%lx):\n", chip->port); - printk("WPD : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_WDP)); - printk("RDP : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_RDP)); - printk("TCR : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_TCR)); - printk("SCR : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_SCR)); - printk("ISR : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_ISR)); - printk("IER : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_IER)); - printk("AK_IFR : 0x%x\n", inw(chip->port + PDAUDIOCF_REG_AK_IFR)); + printk(KERN_DEBUG "PDAUDIOCF DUMP (0x%lx):\n", chip->port); + printk(KERN_DEBUG "WPD : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_WDP)); + printk(KERN_DEBUG "RDP : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_RDP)); + printk(KERN_DEBUG "TCR : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_TCR)); + printk(KERN_DEBUG "SCR : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_SCR)); + printk(KERN_DEBUG "ISR : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_ISR)); + printk(KERN_DEBUG "IER : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_IER)); + printk(KERN_DEBUG "AK_IFR : 0x%x\n", + inw(chip->port + PDAUDIOCF_REG_AK_IFR)); } #endif diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_irq.c b/sound/pcmcia/pdaudiocf/pdaudiocf_irq.c index ea903c8e90dd..dcd32201bc8c 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_irq.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_irq.c @@ -269,7 +269,7 @@ void pdacf_tasklet(unsigned long private_data) rdp = inw(chip->port + PDAUDIOCF_REG_RDP); wdp = inw(chip->port + PDAUDIOCF_REG_WDP); - // printk("TASKLET: rdp = %x, wdp = %x\n", rdp, wdp); + /* printk(KERN_DEBUG "TASKLET: rdp = %x, wdp = %x\n", rdp, wdp); */ size = wdp - rdp; if (size < 0) size += 0x10000; @@ -321,5 +321,5 @@ void pdacf_tasklet(unsigned long private_data) spin_lock(&chip->reg_lock); } spin_unlock(&chip->reg_lock); - // printk("TASKLET: end\n"); + /* printk(KERN_DEBUG "TASKLET: end\n"); */ } diff --git a/sound/sparc/amd7930.c b/sound/sparc/amd7930.c index f87933e48812..7cbc725934e5 100644 --- a/sound/sparc/amd7930.c +++ b/sound/sparc/amd7930.c @@ -954,7 +954,8 @@ static int __devinit snd_amd7930_create(struct snd_card *card, amd->regs = of_ioremap(&op->resource[0], 0, resource_size(&op->resource[0]), "amd7930"); if (!amd->regs) { - snd_printk("amd7930-%d: Unable to map chip registers.\n", dev); + snd_printk(KERN_ERR + "amd7930-%d: Unable to map chip registers.\n", dev); return -EIO; } @@ -962,7 +963,7 @@ static int __devinit snd_amd7930_create(struct snd_card *card, if (request_irq(irq, snd_amd7930_interrupt, IRQF_DISABLED | IRQF_SHARED, "amd7930", amd)) { - snd_printk("amd7930-%d: Unable to grab IRQ %d\n", + snd_printk(KERN_ERR "amd7930-%d: Unable to grab IRQ %d\n", dev, irq); snd_amd7930_free(amd); return -EBUSY; -- cgit v1.2.3 From dd542f169aaa35f4ac0d063e04b41c648a93887c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:15:39 +0100 Subject: ALSA: ca0106 - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/pci/ca0106/ca0106_main.c | 91 ++++++++++++++++++++++++++++++++---------- 1 file changed, 71 insertions(+), 20 deletions(-) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 3aac7e6489c6..dac8a5f040ef 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -412,7 +412,9 @@ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, } tmp = reg << 25 | value << 16; - // snd_printk("I2C-write:reg=0x%x, value=0x%x\n", reg, value); + /* + snd_printk(KERN_DEBUG "I2C-write:reg=0x%x, value=0x%x\n", reg, value); + */ /* Not sure what this I2C channel controls. */ /* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */ @@ -430,7 +432,7 @@ int snd_ca0106_i2c_write(struct snd_ca0106 *emu, /* Wait till the transaction ends */ while (1) { status = snd_ca0106_ptr_read(emu, I2C_A, 0); - //snd_printk("I2C:status=0x%x\n", status); + /*snd_printk(KERN_DEBUG "I2C:status=0x%x\n", status);*/ timeout++; if ((status & I2C_A_ADC_START) == 0) break; @@ -529,7 +531,10 @@ static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substr channel->number = channel_id; channel->use = 1; - //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel); + /* + printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n", + channel_id, chip, channel); + */ //channel->interrupt = snd_ca0106_pcm_channel_interrupt; channel->epcm = epcm; if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) @@ -622,7 +627,10 @@ static int snd_ca0106_pcm_open_capture_channel(struct snd_pcm_substream *substre channel->number = channel_id; channel->use = 1; - //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel); + /* + printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n", + channel_id, chip, channel); + */ //channel->interrupt = snd_ca0106_pcm_channel_interrupt; channel->epcm = epcm; if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) @@ -713,9 +721,20 @@ static int snd_ca0106_pcm_prepare_playback(struct snd_pcm_substream *substream) u32 reg71; int i; - //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1)); - //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base); - //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#if 0 /* debug */ + snd_printk(KERN_DEBUG + "prepare:channel_number=%d, rate=%d, format=0x%x, " + "channels=%d, buffer_size=%ld, period_size=%ld, " + "periods=%u, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, + runtime->channels, runtime->buffer_size, + runtime->period_size, runtime->periods, + frames_to_bytes(runtime, 1)); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n", + runtime->dma_addr, runtime->dma_area, table_base); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", + emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#endif /* debug */ /* Rate can be set per channel. */ /* reg40 control host to fifo */ /* reg71 controls DAC rate. */ @@ -807,9 +826,20 @@ static int snd_ca0106_pcm_prepare_capture(struct snd_pcm_substream *substream) u32 reg71_set = 0; u32 reg71; - //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1)); - //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base); - //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#if 0 /* debug */ + snd_printk(KERN_DEBUG + "prepare:channel_number=%d, rate=%d, format=0x%x, " + "channels=%d, buffer_size=%ld, period_size=%ld, " + "periods=%u, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, + runtime->channels, runtime->buffer_size, + runtime->period_size, runtime->periods, + frames_to_bytes(runtime, 1)); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n", + runtime->dma_addr, runtime->dma_area, table_base); + snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n", + emu->buffer.addr, emu->buffer.area, emu->buffer.bytes); +#endif /* debug */ /* reg71 controls ADC rate. */ switch (runtime->rate) { case 44100: @@ -854,7 +884,14 @@ static int snd_ca0106_pcm_prepare_capture(struct snd_pcm_substream *substream) } - //printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, frames_to_bytes(runtime, 1)); + /* + printk(KERN_DEBUG + "prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, " + "buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n", + channel, runtime->rate, runtime->format, runtime->channels, + runtime->buffer_size, runtime->period_size, + frames_to_bytes(runtime, 1)); + */ snd_ca0106_ptr_write(emu, 0x13, channel, 0); snd_ca0106_ptr_write(emu, CAPTURE_DMA_ADDR, channel, runtime->dma_addr); snd_ca0106_ptr_write(emu, CAPTURE_BUFFER_SIZE, channel, frames_to_bytes(runtime, runtime->buffer_size)<<16); // buffer size in bytes @@ -896,13 +933,13 @@ static int snd_ca0106_pcm_trigger_playback(struct snd_pcm_substream *substream, runtime = s->runtime; epcm = runtime->private_data; channel = epcm->channel_id; - /* snd_printk("channel=%d\n",channel); */ + /* snd_printk(KERN_DEBUG "channel=%d\n", channel); */ epcm->running = running; basic |= (0x1 << channel); extended |= (0x10 << channel); snd_pcm_trigger_done(s, substream); } - /* snd_printk("basic=0x%x, extended=0x%x\n",basic, extended); */ + /* snd_printk(KERN_DEBUG "basic=0x%x, extended=0x%x\n",basic, extended); */ switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -980,8 +1017,13 @@ snd_ca0106_pcm_pointer_playback(struct snd_pcm_substream *substream) ptr=ptr2; if (ptr >= runtime->buffer_size) ptr -= runtime->buffer_size; - //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate); - + /* + printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, " + "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", + ptr1, ptr2, ptr, (int)runtime->buffer_size, + (int)runtime->period_size, (int)runtime->frame_bits, + (int)runtime->rate); + */ return ptr; } @@ -1003,8 +1045,13 @@ snd_ca0106_pcm_pointer_capture(struct snd_pcm_substream *substream) ptr=ptr2; if (ptr >= runtime->buffer_size) ptr -= runtime->buffer_size; - //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate); - + /* + printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, " + "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", + ptr1, ptr2, ptr, (int)runtime->buffer_size, + (int)runtime->period_size, (int)runtime->frame_bits, + (int)runtime->rate); + */ return ptr; } @@ -1189,8 +1236,12 @@ static irqreturn_t snd_ca0106_interrupt(int irq, void *dev_id) return IRQ_NONE; stat76 = snd_ca0106_ptr_read(chip, EXTENDED_INT, 0); - //snd_printk("interrupt status = 0x%08x, stat76=0x%08x\n", status, stat76); - //snd_printk("ptr=0x%08x\n",snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0)); + /* + snd_printk(KERN_DEBUG "interrupt status = 0x%08x, stat76=0x%08x\n", + status, stat76); + snd_printk(KERN_DEBUG "ptr=0x%08x\n", + snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0)); + */ mask = 0x11; /* 0x1 for one half, 0x10 for the other half period. */ for(i = 0; i < 4; i++) { pchannel = &(chip->playback_channels[i]); @@ -1478,7 +1529,7 @@ static void ca0106_init_chip(struct snd_ca0106 *chip, int resume) int size, n; size = ARRAY_SIZE(i2c_adc_init); - /* snd_printk("I2C:array size=0x%x\n", size); */ + /* snd_printk(KERN_DEBUG "I2C:array size=0x%x\n", size); */ for (n = 0; n < size; n++) snd_ca0106_i2c_write(chip, i2c_adc_init[n][0], i2c_adc_init[n][1]); -- cgit v1.2.3 From 6146f0d5e47ca4047ffded0fb79b6c25359b386c Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:06:57 -0500 Subject: integrity: IMA hooks This patch replaces the generic integrity hooks, for which IMA registered itself, with IMA integrity hooks in the appropriate places directly in the fs directory. Signed-off-by: Mimi Zohar Acked-by: Serge Hallyn Signed-off-by: James Morris --- Documentation/kernel-parameters.txt | 1 + fs/exec.c | 10 +++++++++ fs/file_table.c | 2 ++ fs/inode.c | 24 ++++++++++++++------ fs/namei.c | 8 +++++++ include/linux/ima.h | 44 +++++++++++++++++++++++++++++++++++++ mm/mmap.c | 4 ++++ 7 files changed, 86 insertions(+), 7 deletions(-) create mode 100644 include/linux/ima.h diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a2d8805c03d5..7c67b94d1823 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -44,6 +44,7 @@ parameter is applicable: FB The frame buffer device is enabled. HW Appropriate hardware is enabled. IA-64 IA-64 architecture is enabled. + IMA Integrity measurement architecture is enabled. IOSCHED More than one I/O scheduler is enabled. IP_PNP IP DHCP, BOOTP, or RARP is enabled. ISAPNP ISA PnP code is enabled. diff --git a/fs/exec.c b/fs/exec.c index 02d2e120542d..9c789a525cc4 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include #include @@ -128,6 +129,9 @@ asmlinkage long sys_uselib(const char __user * library) goto exit; error = vfs_permission(&nd, MAY_READ | MAY_EXEC | MAY_OPEN); + if (error) + goto exit; + error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN); if (error) goto exit; @@ -681,6 +685,9 @@ struct file *open_exec(const char *name) goto out_path_put; err = vfs_permission(&nd, MAY_EXEC | MAY_OPEN); + if (err) + goto out_path_put; + err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN); if (err) goto out_path_put; @@ -1207,6 +1214,9 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) } #endif retval = security_bprm_check(bprm); + if (retval) + return retval; + retval = ima_bprm_check(bprm); if (retval) return retval; diff --git a/fs/file_table.c b/fs/file_table.c index 0fbcacc3ea75..55895ccc08c6 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -276,6 +277,7 @@ void __fput(struct file *file) if (file->f_op && file->f_op->release) file->f_op->release(inode, file); security_file_free(file); + ima_file_free(file); if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL)) cdev_put(inode->i_cdev); fops_put(file->f_op); diff --git a/fs/inode.c b/fs/inode.c index 098a2443196f..ed22b14f2202 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -144,13 +145,13 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode) inode->i_cdev = NULL; inode->i_rdev = 0; inode->dirtied_when = 0; - if (security_inode_alloc(inode)) { - if (inode->i_sb->s_op->destroy_inode) - inode->i_sb->s_op->destroy_inode(inode); - else - kmem_cache_free(inode_cachep, (inode)); - return NULL; - } + + if (security_inode_alloc(inode)) + goto out_free_inode; + + /* allocate and initialize an i_integrity */ + if (ima_inode_alloc(inode)) + goto out_free_security; spin_lock_init(&inode->i_lock); lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key); @@ -186,6 +187,15 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode) inode->i_mapping = mapping; return inode; + +out_free_security: + security_inode_free(inode); +out_free_inode: + if (inode->i_sb->s_op->destroy_inode) + inode->i_sb->s_op->destroy_inode(inode); + else + kmem_cache_free(inode_cachep, (inode)); + return NULL; } EXPORT_SYMBOL(inode_init_always); diff --git a/fs/namei.c b/fs/namei.c index af3783fff1de..734f2b5591bf 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -860,6 +861,8 @@ static int __link_path_walk(const char *name, struct nameidata *nd) err = exec_permission_lite(inode); if (err == -EAGAIN) err = vfs_permission(nd, MAY_EXEC); + if (!err) + err = ima_path_check(&nd->path, MAY_EXEC); if (err) break; @@ -1525,6 +1528,11 @@ int may_open(struct nameidata *nd, int acc_mode, int flag) error = vfs_permission(nd, acc_mode); if (error) return error; + + error = ima_path_check(&nd->path, + acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC)); + if (error) + return error; /* * An append-only file must be opened in append mode for writing. */ diff --git a/include/linux/ima.h b/include/linux/ima.h new file mode 100644 index 000000000000..4ed1e4d962e2 --- /dev/null +++ b/include/linux/ima.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2008 IBM Corporation + * Author: Mimi Zohar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + */ + +#include + +#ifndef _LINUX_IMA_H +#define _LINUX_IMA_H + +static inline int ima_bprm_check(struct linux_binprm *bprm) +{ + return 0; +} + +static inline int ima_inode_alloc(struct inode *inode) +{ + return 0; +} + +static inline void ima_inode_free(struct inode *inode) +{ + return; +} + +static inline int ima_path_check(struct path *path, int mask) +{ + return 0; +} + +static inline void ima_file_free(struct file *file) +{ + return; +} + +static inline int ima_file_mmap(struct file *file, unsigned long prot) +{ + return 0; +} +#endif /* _LINUX_IMA_H */ diff --git a/mm/mmap.c b/mm/mmap.c index d4855a682ab6..c3647f3b0621 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -1048,6 +1049,9 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr, } error = security_file_mmap(file, reqprot, prot, flags, addr, 0); + if (error) + return error; + error = ima_file_mmap(file, prot); if (error) return error; -- cgit v1.2.3 From 3323eec921efd815178a23107ab63588c605c0b2 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:06:58 -0500 Subject: integrity: IMA as an integrity service provider IMA provides hardware (TPM) based measurement and attestation for file measurements. As the Trusted Computing (TPM) model requires, IMA measures all files before they are accessed in any way (on the integrity_bprm_check, integrity_path_check and integrity_file_mmap hooks), and commits the measurements to the TPM. Once added to the TPM, measurements can not be removed. In addition, IMA maintains a list of these file measurements, which can be used to validate the aggregate value stored in the TPM. The TPM can sign these measurements, and thus the system can prove, to itself and to a third party, the system's integrity in a way that cannot be circumvented by malicious or compromised software. - alloc ima_template_entry before calling ima_store_template() - log ima_add_boot_aggregate() failure - removed unused IMA_TEMPLATE_NAME_LEN - replaced hard coded string length with #define name Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- Documentation/kernel-parameters.txt | 9 ++ include/linux/audit.h | 5 + include/linux/ima.h | 10 ++ security/Kconfig | 5 +- security/Makefile | 4 + security/integrity/ima/Kconfig | 49 +++++++ security/integrity/ima/Makefile | 9 ++ security/integrity/ima/ima.h | 135 +++++++++++++++++ security/integrity/ima/ima_api.c | 190 ++++++++++++++++++++++++ security/integrity/ima/ima_audit.c | 78 ++++++++++ security/integrity/ima/ima_crypto.c | 140 ++++++++++++++++++ security/integrity/ima/ima_iint.c | 185 ++++++++++++++++++++++++ security/integrity/ima/ima_init.c | 90 ++++++++++++ security/integrity/ima/ima_main.c | 280 ++++++++++++++++++++++++++++++++++++ security/integrity/ima/ima_policy.c | 126 ++++++++++++++++ security/integrity/ima/ima_queue.c | 140 ++++++++++++++++++ 16 files changed, 1454 insertions(+), 1 deletion(-) create mode 100644 security/integrity/ima/Kconfig create mode 100644 security/integrity/ima/Makefile create mode 100644 security/integrity/ima/ima.h create mode 100644 security/integrity/ima/ima_api.c create mode 100644 security/integrity/ima/ima_audit.c create mode 100644 security/integrity/ima/ima_crypto.c create mode 100644 security/integrity/ima/ima_iint.c create mode 100644 security/integrity/ima/ima_init.c create mode 100644 security/integrity/ima/ima_main.c create mode 100644 security/integrity/ima/ima_policy.c create mode 100644 security/integrity/ima/ima_queue.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7c67b94d1823..31e0c2c3c6e3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -895,6 +895,15 @@ and is between 256 and 4096 characters. It is defined in the file ihash_entries= [KNL] Set number of hash buckets for inode cache. + ima_audit= [IMA] + Format: { "0" | "1" } + 0 -- integrity auditing messages. (Default) + 1 -- enable informational integrity auditing messages. + + ima_hash= [IMA] + Formt: { "sha1" | "md5" } + default: "sha1" + in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. diff --git a/include/linux/audit.h b/include/linux/audit.h index 26c4f6f65a46..8d1f67789b53 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -125,6 +125,11 @@ #define AUDIT_LAST_KERN_ANOM_MSG 1799 #define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */ #define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */ +#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */ +#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */ +#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ +#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */ +#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */ #define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ diff --git a/include/linux/ima.h b/include/linux/ima.h index 4ed1e4d962e2..dcc3664feee8 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -12,6 +12,15 @@ #ifndef _LINUX_IMA_H #define _LINUX_IMA_H +#ifdef CONFIG_IMA +extern int ima_bprm_check(struct linux_binprm *bprm); +extern int ima_inode_alloc(struct inode *inode); +extern void ima_inode_free(struct inode *inode); +extern int ima_path_check(struct path *path, int mask); +extern void ima_file_free(struct file *file); +extern int ima_file_mmap(struct file *file, unsigned long prot); + +#else static inline int ima_bprm_check(struct linux_binprm *bprm) { return 0; @@ -41,4 +50,5 @@ static inline int ima_file_mmap(struct file *file, unsigned long prot) { return 0; } +#endif /* CONFIG_IMA_H */ #endif /* _LINUX_IMA_H */ diff --git a/security/Kconfig b/security/Kconfig index d9f47ce7e207..a79b23f73d03 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -55,7 +55,8 @@ config SECURITYFS bool "Enable the securityfs filesystem" help This will build the securityfs filesystem. It is currently used by - the TPM bios character driver. It is not used by SELinux or SMACK. + the TPM bios character driver and IMA, an integrity provider. It is + not used by SELinux or SMACK. If you are unsure how to answer this question, answer N. @@ -126,5 +127,7 @@ config SECURITY_DEFAULT_MMAP_MIN_ADDR source security/selinux/Kconfig source security/smack/Kconfig +source security/integrity/ima/Kconfig + endmenu diff --git a/security/Makefile b/security/Makefile index c05c127fff9a..595536cbffb2 100644 --- a/security/Makefile +++ b/security/Makefile @@ -17,3 +17,7 @@ obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o + +# Object integrity file lists +subdir-$(CONFIG_IMA) += integrity/ima +obj-$(CONFIG_IMA) += integrity/ima/built-in.o diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig new file mode 100644 index 000000000000..2a761c8ac996 --- /dev/null +++ b/security/integrity/ima/Kconfig @@ -0,0 +1,49 @@ +# IBM Integrity Measurement Architecture +# +config IMA + bool "Integrity Measurement Architecture(IMA)" + depends on ACPI + select SECURITYFS + select CRYPTO + select CRYPTO_HMAC + select CRYPTO_MD5 + select CRYPTO_SHA1 + select TCG_TPM + select TCG_TIS + help + The Trusted Computing Group(TCG) runtime Integrity + Measurement Architecture(IMA) maintains a list of hash + values of executables and other sensitive system files, + as they are read or executed. If an attacker manages + to change the contents of an important system file + being measured, we can tell. + + If your system has a TPM chip, then IMA also maintains + an aggregate integrity value over this list inside the + TPM hardware, so that the TPM can prove to a third party + whether or not critical system files have been modified. + Read + to learn more about IMA. + If unsure, say N. + +config IMA_MEASURE_PCR_IDX + int + depends on IMA + range 8 14 + default 10 + help + IMA_MEASURE_PCR_IDX determines the TPM PCR register index + that IMA uses to maintain the integrity aggregate of the + measurement list. If unsure, use the default 10. + +config IMA_AUDIT + bool + depends on IMA + default y + help + This option adds a kernel parameter 'ima_audit', which + allows informational auditing messages to be enabled + at boot. If this option is selected, informational integrity + auditing messages can be enabled with 'ima_audit=1' on + the kernel command line. + diff --git a/security/integrity/ima/Makefile b/security/integrity/ima/Makefile new file mode 100644 index 000000000000..9d6bf973b9be --- /dev/null +++ b/security/integrity/ima/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for building Trusted Computing Group's(TCG) runtime Integrity +# Measurement Architecture(IMA). +# + +obj-$(CONFIG_IMA) += ima.o + +ima-y := ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \ + ima_policy.o ima_iint.o ima_audit.o diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h new file mode 100644 index 000000000000..bfa72ed41b9b --- /dev/null +++ b/security/integrity/ima/ima.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2005,2006,2007,2008 IBM Corporation + * + * Authors: + * Reiner Sailer + * Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima.h + * internal Integrity Measurement Architecture (IMA) definitions + */ + +#ifndef __LINUX_IMA_H +#define __LINUX_IMA_H + +#include +#include +#include +#include +#include +#include + +enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_ASCII }; +enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 }; + +/* digest size for IMA, fits SHA1 or MD5 */ +#define IMA_DIGEST_SIZE 20 +#define IMA_EVENT_NAME_LEN_MAX 255 + +#define IMA_HASH_BITS 9 +#define IMA_MEASURE_HTABLE_SIZE (1 << IMA_HASH_BITS) + +/* set during initialization */ +extern int ima_initialized; +extern int ima_used_chip; +extern char *ima_hash; + +/* IMA inode template definition */ +struct ima_template_data { + u8 digest[IMA_DIGEST_SIZE]; /* sha1/md5 measurement hash */ + char file_name[IMA_EVENT_NAME_LEN_MAX + 1]; /* name + \0 */ +}; + +struct ima_template_entry { + u8 digest[IMA_DIGEST_SIZE]; /* sha1 or md5 measurement hash */ + char *template_name; + int template_len; + struct ima_template_data template; +}; + +struct ima_queue_entry { + struct hlist_node hnext; /* place in hash collision list */ + struct list_head later; /* place in ima_measurements list */ + struct ima_template_entry *entry; +}; +extern struct list_head ima_measurements; /* list of all measurements */ + +/* declarations */ +void integrity_audit_msg(int audit_msgno, struct inode *inode, + const unsigned char *fname, const char *op, + const char *cause, int result, int info); + +/* Internal IMA function definitions */ +void ima_iintcache_init(void); +int ima_init(void); +int ima_add_template_entry(struct ima_template_entry *entry, int violation, + const char *op, struct inode *inode); +int ima_calc_hash(struct file *file, char *digest); +int ima_calc_template_hash(int template_len, void *template, char *digest); +int ima_calc_boot_aggregate(char *digest); +void ima_add_violation(struct inode *inode, const unsigned char *filename, + const char *op, const char *cause); + +/* + * used to protect h_table and sha_table + */ +extern spinlock_t ima_queue_lock; + +struct ima_h_table { + atomic_long_t len; /* number of stored measurements in the list */ + atomic_long_t violations; + struct hlist_head queue[IMA_MEASURE_HTABLE_SIZE]; +}; +extern struct ima_h_table ima_htable; + +static inline unsigned long ima_hash_key(u8 *digest) +{ + return hash_long(*digest, IMA_HASH_BITS); +} + +/* iint cache flags */ +#define IMA_MEASURED 1 + +/* integrity data associated with an inode */ +struct ima_iint_cache { + u64 version; /* track inode changes */ + unsigned long flags; + u8 digest[IMA_DIGEST_SIZE]; + struct mutex mutex; /* protects: version, flags, digest */ + long readcount; /* measured files readcount */ + long writecount; /* measured files writecount */ + struct kref refcount; /* ima_iint_cache reference count */ + struct rcu_head rcu; +}; + +/* LIM API function definitions */ +int ima_must_measure(struct ima_iint_cache *iint, struct inode *inode, + int mask, int function); +int ima_collect_measurement(struct ima_iint_cache *iint, struct file *file); +void ima_store_measurement(struct ima_iint_cache *iint, struct file *file, + const unsigned char *filename); +int ima_store_template(struct ima_template_entry *entry, int violation, + struct inode *inode); + +/* radix tree calls to lookup, insert, delete + * integrity data associated with an inode. + */ +struct ima_iint_cache *ima_iint_insert(struct inode *inode); +struct ima_iint_cache *ima_iint_find_get(struct inode *inode); +struct ima_iint_cache *ima_iint_find_insert_get(struct inode *inode); +void ima_iint_delete(struct inode *inode); +void iint_free(struct kref *kref); +void iint_rcu_free(struct rcu_head *rcu); + +/* IMA policy related functions */ +enum ima_hooks { PATH_CHECK = 1, FILE_MMAP, BPRM_CHECK }; + +int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask); +void ima_init_policy(void); +void ima_update_policy(void); +#endif diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c new file mode 100644 index 000000000000..a148a25804f6 --- /dev/null +++ b/security/integrity/ima/ima_api.c @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2008 IBM Corporation + * + * Author: Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima_api.c + * Implements must_measure, collect_measurement, store_measurement, + * and store_template. + */ +#include + +#include "ima.h" +static char *IMA_TEMPLATE_NAME = "ima"; + +/* + * ima_store_template - store ima template measurements + * + * Calculate the hash of a template entry, add the template entry + * to an ordered list of measurement entries maintained inside the kernel, + * and also update the aggregate integrity value (maintained inside the + * configured TPM PCR) over the hashes of the current list of measurement + * entries. + * + * Applications retrieve the current kernel-held measurement list through + * the securityfs entries in /sys/kernel/security/ima. The signed aggregate + * TPM PCR (called quote) can be retrieved using a TPM user space library + * and is used to validate the measurement list. + * + * Returns 0 on success, error code otherwise + */ +int ima_store_template(struct ima_template_entry *entry, + int violation, struct inode *inode) +{ + const char *op = "add_template_measure"; + const char *audit_cause = "hashing_error"; + int result; + + memset(entry->digest, 0, sizeof(entry->digest)); + entry->template_name = IMA_TEMPLATE_NAME; + entry->template_len = sizeof(entry->template); + + if (!violation) { + result = ima_calc_template_hash(entry->template_len, + &entry->template, + entry->digest); + if (result < 0) { + integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, + entry->template_name, op, + audit_cause, result, 0); + return result; + } + } + result = ima_add_template_entry(entry, violation, op, inode); + return result; +} + +/* + * ima_add_violation - add violation to measurement list. + * + * Violations are flagged in the measurement list with zero hash values. + * By extending the PCR with 0xFF's instead of with zeroes, the PCR + * value is invalidated. + */ +void ima_add_violation(struct inode *inode, const unsigned char *filename, + const char *op, const char *cause) +{ + struct ima_template_entry *entry; + int violation = 1; + int result; + + /* can overflow, only indicator */ + atomic_long_inc(&ima_htable.violations); + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + result = -ENOMEM; + goto err_out; + } + memset(&entry->template, 0, sizeof(entry->template)); + strncpy(entry->template.file_name, filename, IMA_EVENT_NAME_LEN_MAX); + result = ima_store_template(entry, violation, inode); + if (result < 0) + kfree(entry); +err_out: + integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, filename, + op, cause, result, 0); +} + +/** + * ima_must_measure - measure decision based on policy. + * @inode: pointer to inode to measure + * @mask: contains the permission mask (MAY_READ, MAY_WRITE, MAY_EXECUTE) + * @function: calling function (PATH_CHECK, BPRM_CHECK, FILE_MMAP) + * + * The policy is defined in terms of keypairs: + * subj=, obj=, type=, func=, mask=, fsmagic= + * subj,obj, and type: are LSM specific. + * func: PATH_CHECK | BPRM_CHECK | FILE_MMAP + * mask: contains the permission mask + * fsmagic: hex value + * + * Must be called with iint->mutex held. + * + * Return 0 to measure. Return 1 if already measured. + * For matching a DONT_MEASURE policy, no policy, or other + * error, return an error code. +*/ +int ima_must_measure(struct ima_iint_cache *iint, struct inode *inode, + int mask, int function) +{ + int must_measure; + + if (iint->flags & IMA_MEASURED) + return 1; + + must_measure = ima_match_policy(inode, function, mask); + return must_measure ? 0 : -EACCES; +} + +/* + * ima_collect_measurement - collect file measurement + * + * Calculate the file hash, if it doesn't already exist, + * storing the measurement and i_version in the iint. + * + * Must be called with iint->mutex held. + * + * Return 0 on success, error code otherwise + */ +int ima_collect_measurement(struct ima_iint_cache *iint, struct file *file) +{ + int result = -EEXIST; + + if (!(iint->flags & IMA_MEASURED)) { + u64 i_version = file->f_dentry->d_inode->i_version; + + memset(iint->digest, 0, IMA_DIGEST_SIZE); + result = ima_calc_hash(file, iint->digest); + if (!result) + iint->version = i_version; + } + return result; +} + +/* + * ima_store_measurement - store file measurement + * + * Create an "ima" template and then store the template by calling + * ima_store_template. + * + * We only get here if the inode has not already been measured, + * but the measurement could already exist: + * - multiple copies of the same file on either the same or + * different filesystems. + * - the inode was previously flushed as well as the iint info, + * containing the hashing info. + * + * Must be called with iint->mutex held. + */ +void ima_store_measurement(struct ima_iint_cache *iint, struct file *file, + const unsigned char *filename) +{ + const char *op = "add_template_measure"; + const char *audit_cause = "ENOMEM"; + int result = -ENOMEM; + struct inode *inode = file->f_dentry->d_inode; + struct ima_template_entry *entry; + int violation = 0; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, filename, + op, audit_cause, result, 0); + return; + } + memset(&entry->template, 0, sizeof(entry->template)); + memcpy(entry->template.digest, iint->digest, IMA_DIGEST_SIZE); + strncpy(entry->template.file_name, filename, IMA_EVENT_NAME_LEN_MAX); + + result = ima_store_template(entry, violation, inode); + if (!result) + iint->flags |= IMA_MEASURED; + else + kfree(entry); +} diff --git a/security/integrity/ima/ima_audit.c b/security/integrity/ima/ima_audit.c new file mode 100644 index 000000000000..8a0f1e23ccf1 --- /dev/null +++ b/security/integrity/ima/ima_audit.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2008 IBM Corporation + * Author: Mimi Zohar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * File: integrity_audit.c + * Audit calls for the integrity subsystem + */ + +#include +#include +#include "ima.h" + +static int ima_audit; + +#ifdef CONFIG_IMA_AUDIT + +/* ima_audit_setup - enable informational auditing messages */ +static int __init ima_audit_setup(char *str) +{ + unsigned long audit; + int rc; + char *op; + + rc = strict_strtoul(str, 0, &audit); + if (rc || audit > 1) + printk(KERN_INFO "ima: invalid ima_audit value\n"); + else + ima_audit = audit; + op = ima_audit ? "ima_audit_enabled" : "ima_audit_not_enabled"; + integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL, NULL, op, 0, 0); + return 1; +} +__setup("ima_audit=", ima_audit_setup); +#endif + +void integrity_audit_msg(int audit_msgno, struct inode *inode, + const unsigned char *fname, const char *op, + const char *cause, int result, int audit_info) +{ + struct audit_buffer *ab; + + if (!ima_audit && audit_info == 1) /* Skip informational messages */ + return; + + ab = audit_log_start(current->audit_context, GFP_KERNEL, audit_msgno); + audit_log_format(ab, "integrity: pid=%d uid=%u auid=%u", + current->pid, current->cred->uid, + audit_get_loginuid(current)); + audit_log_task_context(ab); + switch (audit_msgno) { + case AUDIT_INTEGRITY_DATA: + case AUDIT_INTEGRITY_METADATA: + case AUDIT_INTEGRITY_PCR: + audit_log_format(ab, " op=%s cause=%s", op, cause); + break; + case AUDIT_INTEGRITY_HASH: + audit_log_format(ab, " op=%s hash=%s", op, cause); + break; + case AUDIT_INTEGRITY_STATUS: + default: + audit_log_format(ab, " op=%s", op); + } + audit_log_format(ab, " comm="); + audit_log_untrustedstring(ab, current->comm); + if (fname) { + audit_log_format(ab, " name="); + audit_log_untrustedstring(ab, fname); + } + if (inode) + audit_log_format(ab, " dev=%s ino=%lu", + inode->i_sb->s_id, inode->i_ino); + audit_log_format(ab, " res=%d", result); + audit_log_end(ab); +} diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c new file mode 100644 index 000000000000..c2a46e40999d --- /dev/null +++ b/security/integrity/ima/ima_crypto.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2005,2006,2007,2008 IBM Corporation + * + * Authors: + * Mimi Zohar + * Kylene Hall + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * File: ima_crypto.c + * Calculates md5/sha1 file hash, template hash, boot-aggreate hash + */ + +#include +#include +#include +#include +#include +#include "ima.h" + +static int init_desc(struct hash_desc *desc) +{ + int rc; + + desc->tfm = crypto_alloc_hash(ima_hash, 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(desc->tfm)) { + pr_info("failed to load %s transform: %ld\n", + ima_hash, PTR_ERR(desc->tfm)); + rc = PTR_ERR(desc->tfm); + return rc; + } + desc->flags = 0; + rc = crypto_hash_init(desc); + if (rc) + crypto_free_hash(desc->tfm); + return rc; +} + +/* + * Calculate the MD5/SHA1 file digest + */ +int ima_calc_hash(struct file *file, char *digest) +{ + struct hash_desc desc; + struct scatterlist sg[1]; + loff_t i_size; + char *rbuf; + int rc, offset = 0; + + rc = init_desc(&desc); + if (rc != 0) + return rc; + + rbuf = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!rbuf) { + rc = -ENOMEM; + goto out; + } + i_size = i_size_read(file->f_dentry->d_inode); + while (offset < i_size) { + int rbuf_len; + + rbuf_len = kernel_read(file, offset, rbuf, PAGE_SIZE); + if (rbuf_len < 0) { + rc = rbuf_len; + break; + } + offset += rbuf_len; + sg_set_buf(sg, rbuf, rbuf_len); + + rc = crypto_hash_update(&desc, sg, rbuf_len); + if (rc) + break; + } + kfree(rbuf); + if (!rc) + rc = crypto_hash_final(&desc, digest); +out: + crypto_free_hash(desc.tfm); + return rc; +} + +/* + * Calculate the hash of a given template + */ +int ima_calc_template_hash(int template_len, void *template, char *digest) +{ + struct hash_desc desc; + struct scatterlist sg[1]; + int rc; + + rc = init_desc(&desc); + if (rc != 0) + return rc; + + sg_set_buf(sg, template, template_len); + rc = crypto_hash_update(&desc, sg, template_len); + if (!rc) + rc = crypto_hash_final(&desc, digest); + crypto_free_hash(desc.tfm); + return rc; +} + +static void ima_pcrread(int idx, u8 *pcr) +{ + if (!ima_used_chip) + return; + + if (tpm_pcr_read(TPM_ANY_NUM, idx, pcr) != 0) + pr_err("Error Communicating to TPM chip\n"); +} + +/* + * Calculate the boot aggregate hash + */ +int ima_calc_boot_aggregate(char *digest) +{ + struct hash_desc desc; + struct scatterlist sg; + u8 pcr_i[IMA_DIGEST_SIZE]; + int rc, i; + + rc = init_desc(&desc); + if (rc != 0) + return rc; + + /* cumulative sha1 over tpm registers 0-7 */ + for (i = TPM_PCR0; i < TPM_PCR8; i++) { + ima_pcrread(i, pcr_i); + /* now accumulate with current aggregate */ + sg_init_one(&sg, pcr_i, IMA_DIGEST_SIZE); + rc = crypto_hash_update(&desc, &sg, IMA_DIGEST_SIZE); + } + if (!rc) + crypto_hash_final(&desc, digest); + crypto_free_hash(desc.tfm); + return rc; +} diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c new file mode 100644 index 000000000000..750db3c993a7 --- /dev/null +++ b/security/integrity/ima/ima_iint.c @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2008 IBM Corporation + * + * Authors: + * Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima_iint.c + * - implements the IMA hooks: ima_inode_alloc, ima_inode_free + * - cache integrity information associated with an inode + * using a radix tree. + */ +#include +#include +#include +#include "ima.h" + +#define ima_iint_delete ima_inode_free + +RADIX_TREE(ima_iint_store, GFP_ATOMIC); +DEFINE_SPINLOCK(ima_iint_lock); + +static struct kmem_cache *iint_cache __read_mostly; + +/* ima_iint_find_get - return the iint associated with an inode + * + * ima_iint_find_get gets a reference to the iint. Caller must + * remember to put the iint reference. + */ +struct ima_iint_cache *ima_iint_find_get(struct inode *inode) +{ + struct ima_iint_cache *iint; + + rcu_read_lock(); + iint = radix_tree_lookup(&ima_iint_store, (unsigned long)inode); + if (!iint) + goto out; + kref_get(&iint->refcount); +out: + rcu_read_unlock(); + return iint; +} + +/* Allocate memory for the iint associated with the inode + * from the iint_cache slab, initialize the iint, and + * insert it into the radix tree. + * + * On success return a pointer to the iint; on failure return NULL. + */ +struct ima_iint_cache *ima_iint_insert(struct inode *inode) +{ + struct ima_iint_cache *iint = NULL; + int rc = 0; + + if (!ima_initialized) + return iint; + iint = kmem_cache_alloc(iint_cache, GFP_KERNEL); + if (!iint) + return iint; + + rc = radix_tree_preload(GFP_KERNEL); + if (rc < 0) + goto out; + + spin_lock(&ima_iint_lock); + rc = radix_tree_insert(&ima_iint_store, (unsigned long)inode, iint); + spin_unlock(&ima_iint_lock); +out: + if (rc < 0) { + kmem_cache_free(iint_cache, iint); + if (rc == -EEXIST) { + iint = radix_tree_lookup(&ima_iint_store, + (unsigned long)inode); + } else + iint = NULL; + } + radix_tree_preload_end(); + return iint; +} + +/** + * ima_inode_alloc - allocate an iint associated with an inode + * @inode: pointer to the inode + * + * Return 0 on success, 1 on failure. + */ +int ima_inode_alloc(struct inode *inode) +{ + struct ima_iint_cache *iint; + + if (!ima_initialized) + return 0; + + iint = ima_iint_insert(inode); + if (!iint) + return 1; + return 0; +} + +/* ima_iint_find_insert_get - get the iint associated with an inode + * + * Most insertions are done at inode_alloc, except those allocated + * before late_initcall. When the iint does not exist, allocate it, + * initialize and insert it, and increment the iint refcount. + * + * (Can't initialize at security_initcall before any inodes are + * allocated, got to wait at least until proc_init.) + * + * Return the iint. + */ +struct ima_iint_cache *ima_iint_find_insert_get(struct inode *inode) +{ + struct ima_iint_cache *iint = NULL; + + iint = ima_iint_find_get(inode); + if (iint) + return iint; + + iint = ima_iint_insert(inode); + if (iint) + kref_get(&iint->refcount); + + return iint; +} + +/* iint_free - called when the iint refcount goes to zero */ +void iint_free(struct kref *kref) +{ + struct ima_iint_cache *iint = container_of(kref, struct ima_iint_cache, + refcount); + iint->version = 0; + iint->flags = 0UL; + kref_set(&iint->refcount, 1); + kmem_cache_free(iint_cache, iint); +} + +void iint_rcu_free(struct rcu_head *rcu_head) +{ + struct ima_iint_cache *iint = container_of(rcu_head, + struct ima_iint_cache, rcu); + kref_put(&iint->refcount, iint_free); +} + +/** + * ima_iint_delete - called on integrity_inode_free + * @inode: pointer to the inode + * + * Free the integrity information(iint) associated with an inode. + */ +void ima_iint_delete(struct inode *inode) +{ + struct ima_iint_cache *iint; + + if (!ima_initialized) + return; + spin_lock(&ima_iint_lock); + iint = radix_tree_delete(&ima_iint_store, (unsigned long)inode); + spin_unlock(&ima_iint_lock); + if (iint) + call_rcu(&iint->rcu, iint_rcu_free); +} + +static void init_once(void *foo) +{ + struct ima_iint_cache *iint = foo; + + memset(iint, 0, sizeof *iint); + iint->version = 0; + iint->flags = 0UL; + mutex_init(&iint->mutex); + iint->readcount = 0; + iint->writecount = 0; + kref_set(&iint->refcount, 1); +} + +void ima_iintcache_init(void) +{ + iint_cache = + kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0, + SLAB_PANIC, init_once); +} diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c new file mode 100644 index 000000000000..e0f02e328d77 --- /dev/null +++ b/security/integrity/ima/ima_init.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2005,2006,2007,2008 IBM Corporation + * + * Authors: + * Reiner Sailer + * Leendert van Doorn + * Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima_init.c + * initialization and cleanup functions + */ +#include +#include +#include +#include "ima.h" + +/* name for boot aggregate entry */ +static char *boot_aggregate_name = "boot_aggregate"; +int ima_used_chip; + +/* Add the boot aggregate to the IMA measurement list and extend + * the PCR register. + * + * Calculate the boot aggregate, a SHA1 over tpm registers 0-7, + * assuming a TPM chip exists, and zeroes if the TPM chip does not + * exist. Add the boot aggregate measurement to the measurement + * list and extend the PCR register. + * + * If a tpm chip does not exist, indicate the core root of trust is + * not hardware based by invalidating the aggregate PCR value. + * (The aggregate PCR value is invalidated by adding one value to + * the measurement list and extending the aggregate PCR value with + * a different value.) Violations add a zero entry to the measurement + * list and extend the aggregate PCR value with ff...ff's. + */ +static void ima_add_boot_aggregate(void) +{ + struct ima_template_entry *entry; + const char *op = "add_boot_aggregate"; + const char *audit_cause = "ENOMEM"; + int result = -ENOMEM; + int violation = 1; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + goto err_out; + + memset(&entry->template, 0, sizeof(entry->template)); + strncpy(entry->template.file_name, boot_aggregate_name, + IMA_EVENT_NAME_LEN_MAX); + if (ima_used_chip) { + violation = 0; + result = ima_calc_boot_aggregate(entry->template.digest); + if (result < 0) { + audit_cause = "hashing_error"; + kfree(entry); + goto err_out; + } + } + result = ima_store_template(entry, violation, NULL); + if (result < 0) + kfree(entry); + return; +err_out: + integrity_audit_msg(AUDIT_INTEGRITY_PCR, NULL, boot_aggregate_name, op, + audit_cause, result, 0); +} + +int ima_init(void) +{ + u8 pcr_i[IMA_DIGEST_SIZE]; + int rc; + + ima_used_chip = 0; + rc = tpm_pcr_read(TPM_ANY_NUM, 0, pcr_i); + if (rc == 0) + ima_used_chip = 1; + + if (!ima_used_chip) + pr_info("No TPM chip found, activating TPM-bypass!\n"); + + ima_add_boot_aggregate(); /* boot aggregate must be first entry */ + ima_init_policy(); + return 0; +} diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c new file mode 100644 index 000000000000..53cee4c512ce --- /dev/null +++ b/security/integrity/ima/ima_main.c @@ -0,0 +1,280 @@ +/* + * Copyright (C) 2005,2006,2007,2008 IBM Corporation + * + * Authors: + * Reiner Sailer + * Serge Hallyn + * Kylene Hall + * Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima_main.c + * implements the IMA hooks: ima_bprm_check, ima_file_mmap, + * and ima_path_check. + */ +#include +#include +#include +#include +#include + +#include "ima.h" + +int ima_initialized; + +char *ima_hash = "sha1"; +static int __init hash_setup(char *str) +{ + const char *op = "hash_setup"; + const char *hash = "sha1"; + int result = 0; + int audit_info = 0; + + if (strncmp(str, "md5", 3) == 0) { + hash = "md5"; + ima_hash = str; + } else if (strncmp(str, "sha1", 4) != 0) { + hash = "invalid_hash_type"; + result = 1; + } + integrity_audit_msg(AUDIT_INTEGRITY_HASH, NULL, NULL, op, hash, + result, audit_info); + return 1; +} +__setup("ima_hash=", hash_setup); + +/** + * ima_file_free - called on __fput() + * @file: pointer to file structure being freed + * + * Flag files that changed, based on i_version; + * and decrement the iint readcount/writecount. + */ +void ima_file_free(struct file *file) +{ + struct inode *inode = file->f_dentry->d_inode; + struct ima_iint_cache *iint; + + if (!ima_initialized || !S_ISREG(inode->i_mode)) + return; + iint = ima_iint_find_get(inode); + if (!iint) + return; + + mutex_lock(&iint->mutex); + if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) + iint->readcount--; + + if (file->f_mode & FMODE_WRITE) { + iint->writecount--; + if (iint->writecount == 0) { + if (iint->version != inode->i_version) + iint->flags &= ~IMA_MEASURED; + } + } + mutex_unlock(&iint->mutex); + kref_put(&iint->refcount, iint_free); +} + +/* ima_read_write_check - reflect possible reading/writing errors in the PCR. + * + * When opening a file for read, if the file is already open for write, + * the file could change, resulting in a file measurement error. + * + * Opening a file for write, if the file is already open for read, results + * in a time of measure, time of use (ToMToU) error. + * + * In either case invalidate the PCR. + */ +enum iint_pcr_error { TOMTOU, OPEN_WRITERS }; +static void ima_read_write_check(enum iint_pcr_error error, + struct ima_iint_cache *iint, + struct inode *inode, + const unsigned char *filename) +{ + switch (error) { + case TOMTOU: + if (iint->readcount > 0) + ima_add_violation(inode, filename, "invalid_pcr", + "ToMToU"); + break; + case OPEN_WRITERS: + if (iint->writecount > 0) + ima_add_violation(inode, filename, "invalid_pcr", + "open_writers"); + break; + } +} + +static int get_path_measurement(struct ima_iint_cache *iint, struct file *file, + const unsigned char *filename) +{ + int rc = 0; + + if (IS_ERR(file)) { + pr_info("%s dentry_open failed\n", filename); + return rc; + } + iint->readcount++; + + rc = ima_collect_measurement(iint, file); + if (!rc) + ima_store_measurement(iint, file, filename); + return rc; +} + +/** + * ima_path_check - based on policy, collect/store measurement. + * @path: contains a pointer to the path to be measured + * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE + * + * Measure the file being open for readonly, based on the + * ima_must_measure() policy decision. + * + * Keep read/write counters for all files, but only + * invalidate the PCR for measured files: + * - Opening a file for write when already open for read, + * results in a time of measure, time of use (ToMToU) error. + * - Opening a file for read when already open for write, + * could result in a file measurement error. + * + * Return 0 on success, an error code on failure. + * (Based on the results of appraise_measurement().) + */ +int ima_path_check(struct path *path, int mask) +{ + struct inode *inode = path->dentry->d_inode; + struct ima_iint_cache *iint; + struct file *file = NULL; + int rc; + + if (!ima_initialized || !S_ISREG(inode->i_mode)) + return 0; + iint = ima_iint_find_insert_get(inode); + if (!iint) + return 0; + + mutex_lock(&iint->mutex); + if ((mask & MAY_WRITE) || (mask == 0)) + iint->writecount++; + else if (mask & (MAY_READ | MAY_EXEC)) + iint->readcount++; + + rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK); + if (rc < 0) + goto out; + + if ((mask & MAY_WRITE) || (mask == 0)) + ima_read_write_check(TOMTOU, iint, inode, + path->dentry->d_name.name); + + if ((mask & (MAY_WRITE | MAY_READ | MAY_EXEC)) != MAY_READ) + goto out; + + ima_read_write_check(OPEN_WRITERS, iint, inode, + path->dentry->d_name.name); + if (!(iint->flags & IMA_MEASURED)) { + struct dentry *dentry = dget(path->dentry); + struct vfsmount *mnt = mntget(path->mnt); + + file = dentry_open(dentry, mnt, O_RDONLY, current->cred); + rc = get_path_measurement(iint, file, dentry->d_name.name); + } +out: + mutex_unlock(&iint->mutex); + if (file) + fput(file); + kref_put(&iint->refcount, iint_free); + return 0; +} + +static int process_measurement(struct file *file, const unsigned char *filename, + int mask, int function) +{ + struct inode *inode = file->f_dentry->d_inode; + struct ima_iint_cache *iint; + int rc; + + if (!ima_initialized || !S_ISREG(inode->i_mode)) + return 0; + iint = ima_iint_find_insert_get(inode); + if (!iint) + return -ENOMEM; + + mutex_lock(&iint->mutex); + rc = ima_must_measure(iint, inode, mask, function); + if (rc != 0) + goto out; + + rc = ima_collect_measurement(iint, file); + if (!rc) + ima_store_measurement(iint, file, filename); +out: + mutex_unlock(&iint->mutex); + kref_put(&iint->refcount, iint_free); + return rc; +} + +/** + * ima_file_mmap - based on policy, collect/store measurement. + * @file: pointer to the file to be measured (May be NULL) + * @prot: contains the protection that will be applied by the kernel. + * + * Measure files being mmapped executable based on the ima_must_measure() + * policy decision. + * + * Return 0 on success, an error code on failure. + * (Based on the results of appraise_measurement().) + */ +int ima_file_mmap(struct file *file, unsigned long prot) +{ + int rc; + + if (!file) + return 0; + if (prot & PROT_EXEC) + rc = process_measurement(file, file->f_dentry->d_name.name, + MAY_EXEC, FILE_MMAP); + return 0; +} + +/** + * ima_bprm_check - based on policy, collect/store measurement. + * @bprm: contains the linux_binprm structure + * + * The OS protects against an executable file, already open for write, + * from being executed in deny_write_access() and an executable file, + * already open for execute, from being modified in get_write_access(). + * So we can be certain that what we verify and measure here is actually + * what is being executed. + * + * Return 0 on success, an error code on failure. + * (Based on the results of appraise_measurement().) + */ +int ima_bprm_check(struct linux_binprm *bprm) +{ + int rc; + + rc = process_measurement(bprm->file, bprm->filename, + MAY_EXEC, BPRM_CHECK); + return 0; +} + +static int __init init_ima(void) +{ + int error; + + ima_iintcache_init(); + error = ima_init(); + ima_initialized = 1; + return error; +} + +late_initcall(init_ima); /* Start IMA after the TPM is available */ + +MODULE_DESCRIPTION("Integrity Measurement Architecture"); +MODULE_LICENSE("GPL"); diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c new file mode 100644 index 000000000000..7c3d1ffb1472 --- /dev/null +++ b/security/integrity/ima/ima_policy.c @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2008 IBM Corporation + * Author: Mimi Zohar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * ima_policy.c + * - initialize default measure policy rules + * + */ +#include +#include +#include +#include +#include + +#include "ima.h" + +/* flags definitions */ +#define IMA_FUNC 0x0001 +#define IMA_MASK 0x0002 +#define IMA_FSMAGIC 0x0004 +#define IMA_UID 0x0008 + +enum ima_action { DONT_MEASURE, MEASURE }; + +struct ima_measure_rule_entry { + struct list_head list; + enum ima_action action; + unsigned int flags; + enum ima_hooks func; + int mask; + unsigned long fsmagic; + uid_t uid; +}; + +static struct ima_measure_rule_entry default_rules[] = { + {.action = DONT_MEASURE,.fsmagic = PROC_SUPER_MAGIC, + .flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = SYSFS_MAGIC,.flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = DEBUGFS_MAGIC,.flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = TMPFS_MAGIC,.flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = SECURITYFS_MAGIC, + .flags = IMA_FSMAGIC}, + {.action = DONT_MEASURE,.fsmagic = 0xF97CFF8C,.flags = IMA_FSMAGIC}, + {.action = MEASURE,.func = FILE_MMAP,.mask = MAY_EXEC, + .flags = IMA_FUNC | IMA_MASK}, + {.action = MEASURE,.func = BPRM_CHECK,.mask = MAY_EXEC, + .flags = IMA_FUNC | IMA_MASK}, + {.action = MEASURE,.func = PATH_CHECK,.mask = MAY_READ,.uid = 0, + .flags = IMA_FUNC | IMA_MASK | IMA_UID} +}; + +static LIST_HEAD(measure_default_rules); +static struct list_head *ima_measure; + +/** + * ima_match_rules - determine whether an inode matches the measure rule. + * @rule: a pointer to a rule + * @inode: a pointer to an inode + * @func: LIM hook identifier + * @mask: requested action (MAY_READ | MAY_WRITE | MAY_APPEND | MAY_EXEC) + * + * Returns true on rule match, false on failure. + */ +static bool ima_match_rules(struct ima_measure_rule_entry *rule, + struct inode *inode, enum ima_hooks func, int mask) +{ + struct task_struct *tsk = current; + + if ((rule->flags & IMA_FUNC) && rule->func != func) + return false; + if ((rule->flags & IMA_MASK) && rule->mask != mask) + return false; + if ((rule->flags & IMA_FSMAGIC) + && rule->fsmagic != inode->i_sb->s_magic) + return false; + if ((rule->flags & IMA_UID) && rule->uid != tsk->cred->uid) + return false; + return true; +} + +/** + * ima_match_policy - decision based on LSM and other conditions + * @inode: pointer to an inode for which the policy decision is being made + * @func: IMA hook identifier + * @mask: requested action (MAY_READ | MAY_WRITE | MAY_APPEND | MAY_EXEC) + * + * Measure decision based on func/mask/fsmagic and LSM(subj/obj/type) + * conditions. + * + * (There is no need for locking when walking the policy list, + * as elements in the list are never deleted, nor does the list + * change.) + */ +int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask) +{ + struct ima_measure_rule_entry *entry; + + list_for_each_entry(entry, ima_measure, list) { + bool rc; + + rc = ima_match_rules(entry, inode, func, mask); + if (rc) + return entry->action; + } + return 0; +} + +/** + * ima_init_policy - initialize the default measure rules. + * + * (Could use the default_rules directly, but in policy patch + * ima_measure points to either the measure_default_rules or the + * the new measure_policy_rules.) + */ +void ima_init_policy(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(default_rules); i++) + list_add_tail(&default_rules[i].list, &measure_default_rules); + ima_measure = &measure_default_rules; +} diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c new file mode 100644 index 000000000000..7ec94314ac0c --- /dev/null +++ b/security/integrity/ima/ima_queue.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2005,2006,2007,2008 IBM Corporation + * + * Authors: + * Serge Hallyn + * Reiner Sailer + * Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima_queue.c + * Implements queues that store template measurements and + * maintains aggregate over the stored measurements + * in the pre-configured TPM PCR (if available). + * The measurement list is append-only. No entry is + * ever removed or changed during the boot-cycle. + */ +#include +#include +#include "ima.h" + +LIST_HEAD(ima_measurements); /* list of all measurements */ + +/* key: inode (before secure-hashing a file) */ +struct ima_h_table ima_htable = { + .len = ATOMIC_LONG_INIT(0), + .violations = ATOMIC_LONG_INIT(0), + .queue[0 ... IMA_MEASURE_HTABLE_SIZE - 1] = HLIST_HEAD_INIT +}; + +/* mutex protects atomicity of extending measurement list + * and extending the TPM PCR aggregate. Since tpm_extend can take + * long (and the tpm driver uses a mutex), we can't use the spinlock. + */ +static DEFINE_MUTEX(ima_extend_list_mutex); + +/* lookup up the digest value in the hash table, and return the entry */ +static struct ima_queue_entry *ima_lookup_digest_entry(u8 *digest_value) +{ + struct ima_queue_entry *qe, *ret = NULL; + unsigned int key; + struct hlist_node *pos; + int rc; + + key = ima_hash_key(digest_value); + rcu_read_lock(); + hlist_for_each_entry_rcu(qe, pos, &ima_htable.queue[key], hnext) { + rc = memcmp(qe->entry->digest, digest_value, IMA_DIGEST_SIZE); + if (rc == 0) { + ret = qe; + break; + } + } + rcu_read_unlock(); + return ret; +} + +/* ima_add_template_entry helper function: + * - Add template entry to measurement list and hash table. + * + * (Called with ima_extend_list_mutex held.) + */ +static int ima_add_digest_entry(struct ima_template_entry *entry) +{ + struct ima_queue_entry *qe; + unsigned int key; + + qe = kmalloc(sizeof(*qe), GFP_KERNEL); + if (qe == NULL) { + pr_err("OUT OF MEMORY ERROR creating queue entry.\n"); + return -ENOMEM; + } + qe->entry = entry; + + INIT_LIST_HEAD(&qe->later); + list_add_tail_rcu(&qe->later, &ima_measurements); + + atomic_long_inc(&ima_htable.len); + key = ima_hash_key(entry->digest); + hlist_add_head_rcu(&qe->hnext, &ima_htable.queue[key]); + return 0; +} + +static int ima_pcr_extend(const u8 *hash) +{ + int result = 0; + + if (!ima_used_chip) + return result; + + result = tpm_pcr_extend(TPM_ANY_NUM, CONFIG_IMA_MEASURE_PCR_IDX, hash); + if (result != 0) + pr_err("Error Communicating to TPM chip\n"); + return result; +} + +/* Add template entry to the measurement list and hash table, + * and extend the pcr. + */ +int ima_add_template_entry(struct ima_template_entry *entry, int violation, + const char *op, struct inode *inode) +{ + u8 digest[IMA_DIGEST_SIZE]; + const char *audit_cause = "hash_added"; + int audit_info = 1; + int result = 0; + + mutex_lock(&ima_extend_list_mutex); + if (!violation) { + memcpy(digest, entry->digest, sizeof digest); + if (ima_lookup_digest_entry(digest)) { + audit_cause = "hash_exists"; + goto out; + } + } + + result = ima_add_digest_entry(entry); + if (result < 0) { + audit_cause = "ENOMEM"; + audit_info = 0; + goto out; + } + + if (violation) /* invalidate pcr */ + memset(digest, 0xff, sizeof digest); + + result = ima_pcr_extend(digest); + if (result != 0) { + audit_cause = "TPM error"; + audit_info = 0; + } +out: + mutex_unlock(&ima_extend_list_mutex); + integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, entry->template_name, + op, audit_cause, result, audit_info); + return result; +} -- cgit v1.2.3 From bab739378758a1e2b2d7ddcee7bc06cf4c591c3c Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:06:59 -0500 Subject: integrity: IMA display Make the measurement lists available through securityfs. - removed test for NULL return code from securityfs_create_file/dir Signed-off-by: Mimi Zohar Acked-by: Serge Hallyn Signed-off-by: James Morris --- security/integrity/ima/Makefile | 2 +- security/integrity/ima/ima.h | 5 + security/integrity/ima/ima_fs.c | 296 ++++++++++++++++++++++++++++++++++++++ security/integrity/ima/ima_init.c | 8 +- security/integrity/ima/ima_main.c | 5 + 5 files changed, 314 insertions(+), 2 deletions(-) create mode 100644 security/integrity/ima/ima_fs.c diff --git a/security/integrity/ima/Makefile b/security/integrity/ima/Makefile index 9d6bf973b9be..787c4cb916cd 100644 --- a/security/integrity/ima/Makefile +++ b/security/integrity/ima/Makefile @@ -5,5 +5,5 @@ obj-$(CONFIG_IMA) += ima.o -ima-y := ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \ +ima-y := ima_fs.o ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \ ima_policy.o ima_iint.o ima_audit.o diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index bfa72ed41b9b..9c280cc73004 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -67,6 +67,9 @@ void integrity_audit_msg(int audit_msgno, struct inode *inode, /* Internal IMA function definitions */ void ima_iintcache_init(void); int ima_init(void); +void ima_cleanup(void); +int ima_fs_init(void); +void ima_fs_cleanup(void); int ima_add_template_entry(struct ima_template_entry *entry, int violation, const char *op, struct inode *inode); int ima_calc_hash(struct file *file, char *digest); @@ -115,6 +118,8 @@ void ima_store_measurement(struct ima_iint_cache *iint, struct file *file, const unsigned char *filename); int ima_store_template(struct ima_template_entry *entry, int violation, struct inode *inode); +void ima_template_show(struct seq_file *m, void *e, + enum ima_show_type show); /* radix tree calls to lookup, insert, delete * integrity data associated with an inode. diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c new file mode 100644 index 000000000000..4f25be768b50 --- /dev/null +++ b/security/integrity/ima/ima_fs.c @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2005,2006,2007,2008 IBM Corporation + * + * Authors: + * Kylene Hall + * Reiner Sailer + * Mimi Zohar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + * + * File: ima_fs.c + * implemenents security file system for reporting + * current measurement list and IMA statistics + */ +#include +#include +#include +#include + +#include "ima.h" + +#define TMPBUFLEN 12 +static ssize_t ima_show_htable_value(char __user *buf, size_t count, + loff_t *ppos, atomic_long_t *val) +{ + char tmpbuf[TMPBUFLEN]; + ssize_t len; + + len = scnprintf(tmpbuf, TMPBUFLEN, "%li\n", atomic_long_read(val)); + return simple_read_from_buffer(buf, count, ppos, tmpbuf, len); +} + +static ssize_t ima_show_htable_violations(struct file *filp, + char __user *buf, + size_t count, loff_t *ppos) +{ + return ima_show_htable_value(buf, count, ppos, &ima_htable.violations); +} + +static struct file_operations ima_htable_violations_ops = { + .read = ima_show_htable_violations +}; + +static ssize_t ima_show_measurements_count(struct file *filp, + char __user *buf, + size_t count, loff_t *ppos) +{ + return ima_show_htable_value(buf, count, ppos, &ima_htable.len); + +} + +static struct file_operations ima_measurements_count_ops = { + .read = ima_show_measurements_count +}; + +/* returns pointer to hlist_node */ +static void *ima_measurements_start(struct seq_file *m, loff_t *pos) +{ + loff_t l = *pos; + struct ima_queue_entry *qe; + + /* we need a lock since pos could point beyond last element */ + rcu_read_lock(); + list_for_each_entry_rcu(qe, &ima_measurements, later) { + if (!l--) { + rcu_read_unlock(); + return qe; + } + } + rcu_read_unlock(); + return NULL; +} + +static void *ima_measurements_next(struct seq_file *m, void *v, loff_t *pos) +{ + struct ima_queue_entry *qe = v; + + /* lock protects when reading beyond last element + * against concurrent list-extension + */ + rcu_read_lock(); + qe = list_entry(rcu_dereference(qe->later.next), + struct ima_queue_entry, later); + rcu_read_unlock(); + (*pos)++; + + return (&qe->later == &ima_measurements) ? NULL : qe; +} + +static void ima_measurements_stop(struct seq_file *m, void *v) +{ +} + +static void ima_putc(struct seq_file *m, void *data, int datalen) +{ + while (datalen--) + seq_putc(m, *(char *)data++); +} + +/* print format: + * 32bit-le=pcr# + * char[20]=template digest + * 32bit-le=template name size + * char[n]=template name + * eventdata[n]=template specific data + */ +static int ima_measurements_show(struct seq_file *m, void *v) +{ + /* the list never shrinks, so we don't need a lock here */ + struct ima_queue_entry *qe = v; + struct ima_template_entry *e; + int namelen; + u32 pcr = CONFIG_IMA_MEASURE_PCR_IDX; + + /* get entry */ + e = qe->entry; + if (e == NULL) + return -1; + + /* + * 1st: PCRIndex + * PCR used is always the same (config option) in + * little-endian format + */ + ima_putc(m, &pcr, sizeof pcr); + + /* 2nd: template digest */ + ima_putc(m, e->digest, IMA_DIGEST_SIZE); + + /* 3rd: template name size */ + namelen = strlen(e->template_name); + ima_putc(m, &namelen, sizeof namelen); + + /* 4th: template name */ + ima_putc(m, e->template_name, namelen); + + /* 5th: template specific data */ + ima_template_show(m, (struct ima_template_data *)&e->template, + IMA_SHOW_BINARY); + return 0; +} + +static struct seq_operations ima_measurments_seqops = { + .start = ima_measurements_start, + .next = ima_measurements_next, + .stop = ima_measurements_stop, + .show = ima_measurements_show +}; + +static int ima_measurements_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &ima_measurments_seqops); +} + +static struct file_operations ima_measurements_ops = { + .open = ima_measurements_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static void ima_print_digest(struct seq_file *m, u8 *digest) +{ + int i; + + for (i = 0; i < IMA_DIGEST_SIZE; i++) + seq_printf(m, "%02x", *(digest + i)); +} + +void ima_template_show(struct seq_file *m, void *e, enum ima_show_type show) +{ + struct ima_template_data *entry = e; + int namelen; + + switch (show) { + case IMA_SHOW_ASCII: + ima_print_digest(m, entry->digest); + seq_printf(m, " %s\n", entry->file_name); + break; + case IMA_SHOW_BINARY: + ima_putc(m, entry->digest, IMA_DIGEST_SIZE); + + namelen = strlen(entry->file_name); + ima_putc(m, &namelen, sizeof namelen); + ima_putc(m, entry->file_name, namelen); + default: + break; + } +} + +/* print in ascii */ +static int ima_ascii_measurements_show(struct seq_file *m, void *v) +{ + /* the list never shrinks, so we don't need a lock here */ + struct ima_queue_entry *qe = v; + struct ima_template_entry *e; + + /* get entry */ + e = qe->entry; + if (e == NULL) + return -1; + + /* 1st: PCR used (config option) */ + seq_printf(m, "%2d ", CONFIG_IMA_MEASURE_PCR_IDX); + + /* 2nd: SHA1 template hash */ + ima_print_digest(m, e->digest); + + /* 3th: template name */ + seq_printf(m, " %s ", e->template_name); + + /* 4th: template specific data */ + ima_template_show(m, (struct ima_template_data *)&e->template, + IMA_SHOW_ASCII); + return 0; +} + +static struct seq_operations ima_ascii_measurements_seqops = { + .start = ima_measurements_start, + .next = ima_measurements_next, + .stop = ima_measurements_stop, + .show = ima_ascii_measurements_show +}; + +static int ima_ascii_measurements_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &ima_ascii_measurements_seqops); +} + +static struct file_operations ima_ascii_measurements_ops = { + .open = ima_ascii_measurements_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static struct dentry *ima_dir; +static struct dentry *binary_runtime_measurements; +static struct dentry *ascii_runtime_measurements; +static struct dentry *runtime_measurements_count; +static struct dentry *violations; + +int ima_fs_init(void) +{ + ima_dir = securityfs_create_dir("ima", NULL); + if (IS_ERR(ima_dir)) + return -1; + + binary_runtime_measurements = + securityfs_create_file("binary_runtime_measurements", + S_IRUSR | S_IRGRP, ima_dir, NULL, + &ima_measurements_ops); + if (IS_ERR(binary_runtime_measurements)) + goto out; + + ascii_runtime_measurements = + securityfs_create_file("ascii_runtime_measurements", + S_IRUSR | S_IRGRP, ima_dir, NULL, + &ima_ascii_measurements_ops); + if (IS_ERR(ascii_runtime_measurements)) + goto out; + + runtime_measurements_count = + securityfs_create_file("runtime_measurements_count", + S_IRUSR | S_IRGRP, ima_dir, NULL, + &ima_measurements_count_ops); + if (IS_ERR(runtime_measurements_count)) + goto out; + + violations = + securityfs_create_file("violations", S_IRUSR | S_IRGRP, + ima_dir, NULL, &ima_htable_violations_ops); + if (IS_ERR(violations)) + goto out; + + return 0; + +out: + securityfs_remove(runtime_measurements_count); + securityfs_remove(ascii_runtime_measurements); + securityfs_remove(binary_runtime_measurements); + securityfs_remove(ima_dir); + return -1; +} + +void __exit ima_fs_cleanup(void) +{ + securityfs_remove(violations); + securityfs_remove(runtime_measurements_count); + securityfs_remove(ascii_runtime_measurements); + securityfs_remove(binary_runtime_measurements); + securityfs_remove(ima_dir); +} diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c index e0f02e328d77..cf227dbfac2c 100644 --- a/security/integrity/ima/ima_init.c +++ b/security/integrity/ima/ima_init.c @@ -86,5 +86,11 @@ int ima_init(void) ima_add_boot_aggregate(); /* boot aggregate must be first entry */ ima_init_policy(); - return 0; + + return ima_fs_init(); +} + +void __exit ima_cleanup(void) +{ + ima_fs_cleanup(); } diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 53cee4c512ce..871e356e8d6c 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -274,6 +274,11 @@ static int __init init_ima(void) return error; } +static void __exit cleanup_ima(void) +{ + ima_cleanup(); +} + late_initcall(init_ima); /* Start IMA after the TPM is available */ MODULE_DESCRIPTION("Integrity Measurement Architecture"); -- cgit v1.2.3 From 4af4662fa4a9dc62289c580337ae2506339c4729 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:07:00 -0500 Subject: integrity: IMA policy Support for a user loadable policy through securityfs with support for LSM specific policy data. - free invalid rule in ima_parse_add_rule() Signed-off-by: Mimi Zohar Acked-by: Serge Hallyn Signed-off-by: James Morris --- Documentation/ABI/testing/ima_policy | 61 ++++++++ security/integrity/ima/Kconfig | 6 + security/integrity/ima/ima.h | 24 +++ security/integrity/ima/ima_fs.c | 67 +++++++- security/integrity/ima/ima_policy.c | 293 ++++++++++++++++++++++++++++++++++- 5 files changed, 447 insertions(+), 4 deletions(-) create mode 100644 Documentation/ABI/testing/ima_policy diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy new file mode 100644 index 000000000000..6434f0df012e --- /dev/null +++ b/Documentation/ABI/testing/ima_policy @@ -0,0 +1,61 @@ +What: security/ima/policy +Date: May 2008 +Contact: Mimi Zohar +Description: + The Trusted Computing Group(TCG) runtime Integrity + Measurement Architecture(IMA) maintains a list of hash + values of executables and other sensitive system files + loaded into the run-time of this system. At runtime, + the policy can be constrained based on LSM specific data. + Policies are loaded into the securityfs file ima/policy + by opening the file, writing the rules one at a time and + then closing the file. The new policy takes effect after + the file ima/policy is closed. + + rule format: action [condition ...] + + action: measure | dont_measure + condition:= base | lsm + base: [[func=] [mask=] [fsmagic=] [uid=]] + lsm: [[subj_user=] [subj_role=] [subj_type=] + [obj_user=] [obj_role=] [obj_type=]] + + base: func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION] + mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] + fsmagic:= hex value + uid:= decimal value + lsm: are LSM specific + + default policy: + # PROC_SUPER_MAGIC + dont_measure fsmagic=0x9fa0 + # SYSFS_MAGIC + dont_measure fsmagic=0x62656572 + # DEBUGFS_MAGIC + dont_measure fsmagic=0x64626720 + # TMPFS_MAGIC + dont_measure fsmagic=0x01021994 + # SECURITYFS_MAGIC + dont_measure fsmagic=0x73636673 + + measure func=BPRM_CHECK + measure func=FILE_MMAP mask=MAY_EXEC + measure func=INODE_PERM mask=MAY_READ uid=0 + + The default policy measures all executables in bprm_check, + all files mmapped executable in file_mmap, and all files + open for read by root in inode_permission. + + Examples of LSM specific definitions: + + SELinux: + # SELINUX_MAGIC + dont_measure fsmagic=0xF97CFF8C + + dont_measure obj_type=var_log_t + dont_measure obj_type=auditd_log_t + measure subj_user=system_u func=INODE_PERM mask=MAY_READ + measure subj_role=system_r func=INODE_PERM mask=MAY_READ + + Smack: + measure subj_user=_ func=INODE_PERM mask=MAY_READ diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index 2a761c8ac996..3d2b6ee778a0 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -47,3 +47,9 @@ config IMA_AUDIT auditing messages can be enabled with 'ima_audit=1' on the kernel command line. +config IMA_LSM_RULES + bool + depends on IMA && (SECURITY_SELINUX || SECURITY_SMACK) + default y + help + Disabling this option will disregard LSM based policy rules diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 9c280cc73004..42706b554921 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -137,4 +137,28 @@ enum ima_hooks { PATH_CHECK = 1, FILE_MMAP, BPRM_CHECK }; int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask); void ima_init_policy(void); void ima_update_policy(void); +int ima_parse_add_rule(char *); +void ima_delete_rules(void); + +/* LSM based policy rules require audit */ +#ifdef CONFIG_IMA_LSM_RULES + +#define security_filter_rule_init security_audit_rule_init +#define security_filter_rule_match security_audit_rule_match + +#else + +static inline int security_filter_rule_init(u32 field, u32 op, char *rulestr, + void **lsmrule) +{ + return -EINVAL; +} + +static inline int security_filter_rule_match(u32 secid, u32 field, u32 op, + void *lsmrule, + struct audit_context *actx) +{ + return -EINVAL; +} +#endif /* CONFIG_IMA_LSM_RULES */ #endif diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index 4f25be768b50..95ef1caa64b5 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -19,9 +19,11 @@ #include #include #include +#include #include "ima.h" +static int valid_policy = 1; #define TMPBUFLEN 12 static ssize_t ima_show_htable_value(char __user *buf, size_t count, loff_t *ppos, atomic_long_t *val) @@ -237,11 +239,66 @@ static struct file_operations ima_ascii_measurements_ops = { .release = seq_release, }; +static ssize_t ima_write_policy(struct file *file, const char __user *buf, + size_t datalen, loff_t *ppos) +{ + char *data; + int rc; + + if (datalen >= PAGE_SIZE) + return -ENOMEM; + if (*ppos != 0) { + /* No partial writes. */ + return -EINVAL; + } + data = kmalloc(datalen + 1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (copy_from_user(data, buf, datalen)) { + kfree(data); + return -EFAULT; + } + *(data + datalen) = '\0'; + rc = ima_parse_add_rule(data); + if (rc < 0) { + datalen = -EINVAL; + valid_policy = 0; + } + + kfree(data); + return datalen; +} + static struct dentry *ima_dir; static struct dentry *binary_runtime_measurements; static struct dentry *ascii_runtime_measurements; static struct dentry *runtime_measurements_count; static struct dentry *violations; +static struct dentry *ima_policy; + +/* + * ima_release_policy - start using the new measure policy rules. + * + * Initially, ima_measure points to the default policy rules, now + * point to the new policy rules, and remove the securityfs policy file. + */ +static int ima_release_policy(struct inode *inode, struct file *file) +{ + if (!valid_policy) { + ima_delete_rules(); + return 0; + } + ima_update_policy(); + securityfs_remove(ima_policy); + ima_policy = NULL; + return 0; +} + +static struct file_operations ima_measure_policy_ops = { + .write = ima_write_policy, + .release = ima_release_policy +}; int ima_fs_init(void) { @@ -276,13 +333,20 @@ int ima_fs_init(void) if (IS_ERR(violations)) goto out; - return 0; + ima_policy = securityfs_create_file("policy", + S_IRUSR | S_IRGRP | S_IWUSR, + ima_dir, NULL, + &ima_measure_policy_ops); + if (IS_ERR(ima_policy)) + goto out; + return 0; out: securityfs_remove(runtime_measurements_count); securityfs_remove(ascii_runtime_measurements); securityfs_remove(binary_runtime_measurements); securityfs_remove(ima_dir); + securityfs_remove(ima_policy); return -1; } @@ -293,4 +357,5 @@ void __exit ima_fs_cleanup(void) securityfs_remove(ascii_runtime_measurements); securityfs_remove(binary_runtime_measurements); securityfs_remove(ima_dir); + securityfs_remove(ima_policy); } diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index 7c3d1ffb1472..bd453603e2c3 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "ima.h" @@ -24,7 +25,12 @@ #define IMA_FSMAGIC 0x0004 #define IMA_UID 0x0008 -enum ima_action { DONT_MEASURE, MEASURE }; +enum ima_action { UNKNOWN = -1, DONT_MEASURE = 0, MEASURE }; + +#define MAX_LSM_RULES 6 +enum lsm_rule_types { LSM_OBJ_USER, LSM_OBJ_ROLE, LSM_OBJ_TYPE, + LSM_SUBJ_USER, LSM_SUBJ_ROLE, LSM_SUBJ_TYPE +}; struct ima_measure_rule_entry { struct list_head list; @@ -34,8 +40,15 @@ struct ima_measure_rule_entry { int mask; unsigned long fsmagic; uid_t uid; + struct { + void *rule; /* LSM file metadata specific */ + int type; /* audit type */ + } lsm[MAX_LSM_RULES]; }; +/* Without LSM specific knowledge, the default policy can only be + * written in terms of .action, .func, .mask, .fsmagic, and .uid + */ static struct ima_measure_rule_entry default_rules[] = { {.action = DONT_MEASURE,.fsmagic = PROC_SUPER_MAGIC, .flags = IMA_FSMAGIC}, @@ -54,8 +67,11 @@ static struct ima_measure_rule_entry default_rules[] = { }; static LIST_HEAD(measure_default_rules); +static LIST_HEAD(measure_policy_rules); static struct list_head *ima_measure; +static DEFINE_MUTEX(ima_measure_mutex); + /** * ima_match_rules - determine whether an inode matches the measure rule. * @rule: a pointer to a rule @@ -69,6 +85,7 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule, struct inode *inode, enum ima_hooks func, int mask) { struct task_struct *tsk = current; + int i; if ((rule->flags & IMA_FUNC) && rule->func != func) return false; @@ -79,6 +96,39 @@ static bool ima_match_rules(struct ima_measure_rule_entry *rule, return false; if ((rule->flags & IMA_UID) && rule->uid != tsk->cred->uid) return false; + for (i = 0; i < MAX_LSM_RULES; i++) { + int rc; + u32 osid, sid; + + if (!rule->lsm[i].rule) + continue; + + switch (i) { + case LSM_OBJ_USER: + case LSM_OBJ_ROLE: + case LSM_OBJ_TYPE: + security_inode_getsecid(inode, &osid); + rc = security_filter_rule_match(osid, + rule->lsm[i].type, + AUDIT_EQUAL, + rule->lsm[i].rule, + NULL); + break; + case LSM_SUBJ_USER: + case LSM_SUBJ_ROLE: + case LSM_SUBJ_TYPE: + security_task_getsecid(tsk, &sid); + rc = security_filter_rule_match(sid, + rule->lsm[i].type, + AUDIT_EQUAL, + rule->lsm[i].rule, + NULL); + default: + break; + } + if (!rc) + return false; + } return true; } @@ -112,9 +162,8 @@ int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask) /** * ima_init_policy - initialize the default measure rules. * - * (Could use the default_rules directly, but in policy patch * ima_measure points to either the measure_default_rules or the - * the new measure_policy_rules.) + * the new measure_policy_rules. */ void ima_init_policy(void) { @@ -124,3 +173,241 @@ void ima_init_policy(void) list_add_tail(&default_rules[i].list, &measure_default_rules); ima_measure = &measure_default_rules; } + +/** + * ima_update_policy - update default_rules with new measure rules + * + * Called on file .release to update the default rules with a complete new + * policy. Once updated, the policy is locked, no additional rules can be + * added to the policy. + */ +void ima_update_policy(void) +{ + const char *op = "policy_update"; + const char *cause = "already exists"; + int result = 1; + int audit_info = 0; + + if (ima_measure == &measure_default_rules) { + ima_measure = &measure_policy_rules; + cause = "complete"; + result = 0; + } + integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, + NULL, op, cause, result, audit_info); +} + +enum { + Opt_err = -1, + Opt_measure = 1, Opt_dont_measure, + Opt_obj_user, Opt_obj_role, Opt_obj_type, + Opt_subj_user, Opt_subj_role, Opt_subj_type, + Opt_func, Opt_mask, Opt_fsmagic, Opt_uid +}; + +static match_table_t policy_tokens = { + {Opt_measure, "measure"}, + {Opt_dont_measure, "dont_measure"}, + {Opt_obj_user, "obj_user=%s"}, + {Opt_obj_role, "obj_role=%s"}, + {Opt_obj_type, "obj_type=%s"}, + {Opt_subj_user, "subj_user=%s"}, + {Opt_subj_role, "subj_role=%s"}, + {Opt_subj_type, "subj_type=%s"}, + {Opt_func, "func=%s"}, + {Opt_mask, "mask=%s"}, + {Opt_fsmagic, "fsmagic=%s"}, + {Opt_uid, "uid=%s"}, + {Opt_err, NULL} +}; + +static int ima_lsm_rule_init(struct ima_measure_rule_entry *entry, + char *args, int lsm_rule, int audit_type) +{ + int result; + + entry->lsm[lsm_rule].type = audit_type; + result = security_filter_rule_init(entry->lsm[lsm_rule].type, + AUDIT_EQUAL, args, + &entry->lsm[lsm_rule].rule); + return result; +} + +static int ima_parse_rule(char *rule, struct ima_measure_rule_entry *entry) +{ + struct audit_buffer *ab; + char *p; + int result = 0; + + ab = audit_log_start(current->audit_context, GFP_KERNEL, + AUDIT_INTEGRITY_STATUS); + + entry->action = -1; + while ((p = strsep(&rule, " \n")) != NULL) { + substring_t args[MAX_OPT_ARGS]; + int token; + unsigned long lnum; + + if (result < 0) + break; + if (!*p) + continue; + token = match_token(p, policy_tokens, args); + switch (token) { + case Opt_measure: + audit_log_format(ab, "%s ", "measure"); + entry->action = MEASURE; + break; + case Opt_dont_measure: + audit_log_format(ab, "%s ", "dont_measure"); + entry->action = DONT_MEASURE; + break; + case Opt_func: + audit_log_format(ab, "func=%s ", args[0].from); + if (strcmp(args[0].from, "PATH_CHECK") == 0) + entry->func = PATH_CHECK; + else if (strcmp(args[0].from, "FILE_MMAP") == 0) + entry->func = FILE_MMAP; + else if (strcmp(args[0].from, "BPRM_CHECK") == 0) + entry->func = BPRM_CHECK; + else + result = -EINVAL; + if (!result) + entry->flags |= IMA_FUNC; + break; + case Opt_mask: + audit_log_format(ab, "mask=%s ", args[0].from); + if ((strcmp(args[0].from, "MAY_EXEC")) == 0) + entry->mask = MAY_EXEC; + else if (strcmp(args[0].from, "MAY_WRITE") == 0) + entry->mask = MAY_WRITE; + else if (strcmp(args[0].from, "MAY_READ") == 0) + entry->mask = MAY_READ; + else if (strcmp(args[0].from, "MAY_APPEND") == 0) + entry->mask = MAY_APPEND; + else + result = -EINVAL; + if (!result) + entry->flags |= IMA_MASK; + break; + case Opt_fsmagic: + audit_log_format(ab, "fsmagic=%s ", args[0].from); + result = strict_strtoul(args[0].from, 16, + &entry->fsmagic); + if (!result) + entry->flags |= IMA_FSMAGIC; + break; + case Opt_uid: + audit_log_format(ab, "uid=%s ", args[0].from); + result = strict_strtoul(args[0].from, 10, &lnum); + if (!result) { + entry->uid = (uid_t) lnum; + if (entry->uid != lnum) + result = -EINVAL; + else + entry->flags |= IMA_UID; + } + break; + case Opt_obj_user: + audit_log_format(ab, "obj_user=%s ", args[0].from); + result = ima_lsm_rule_init(entry, args[0].from, + LSM_OBJ_USER, + AUDIT_OBJ_USER); + break; + case Opt_obj_role: + audit_log_format(ab, "obj_role=%s ", args[0].from); + result = ima_lsm_rule_init(entry, args[0].from, + LSM_OBJ_ROLE, + AUDIT_OBJ_ROLE); + break; + case Opt_obj_type: + audit_log_format(ab, "obj_type=%s ", args[0].from); + result = ima_lsm_rule_init(entry, args[0].from, + LSM_OBJ_TYPE, + AUDIT_OBJ_TYPE); + break; + case Opt_subj_user: + audit_log_format(ab, "subj_user=%s ", args[0].from); + result = ima_lsm_rule_init(entry, args[0].from, + LSM_SUBJ_USER, + AUDIT_SUBJ_USER); + break; + case Opt_subj_role: + audit_log_format(ab, "subj_role=%s ", args[0].from); + result = ima_lsm_rule_init(entry, args[0].from, + LSM_SUBJ_ROLE, + AUDIT_SUBJ_ROLE); + break; + case Opt_subj_type: + audit_log_format(ab, "subj_type=%s ", args[0].from); + result = ima_lsm_rule_init(entry, args[0].from, + LSM_SUBJ_TYPE, + AUDIT_SUBJ_TYPE); + break; + case Opt_err: + printk(KERN_INFO "%s: unknown token: %s\n", + __FUNCTION__, p); + break; + } + } + if (entry->action == UNKNOWN) + result = -EINVAL; + + audit_log_format(ab, "res=%d", result); + audit_log_end(ab); + return result; +} + +/** + * ima_parse_add_rule - add a rule to measure_policy_rules + * @rule - ima measurement policy rule + * + * Uses a mutex to protect the policy list from multiple concurrent writers. + * Returns 0 on success, an error code on failure. + */ +int ima_parse_add_rule(char *rule) +{ + const char *op = "add_rule"; + struct ima_measure_rule_entry *entry; + int result = 0; + int audit_info = 0; + + /* Prevent installed policy from changing */ + if (ima_measure != &measure_default_rules) { + integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, + NULL, op, "already exists", + -EACCES, audit_info); + return -EACCES; + } + + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, + NULL, op, "-ENOMEM", -ENOMEM, audit_info); + return -ENOMEM; + } + + INIT_LIST_HEAD(&entry->list); + + result = ima_parse_rule(rule, entry); + if (!result) { + mutex_lock(&ima_measure_mutex); + list_add_tail(&entry->list, &measure_policy_rules); + mutex_unlock(&ima_measure_mutex); + } else + kfree(entry); + return result; +} + +/* ima_delete_rules called to cleanup invalid policy */ +void ima_delete_rules() +{ + struct ima_measure_rule_entry *entry, *tmp; + + mutex_lock(&ima_measure_mutex); + list_for_each_entry_safe(entry, tmp, &measure_policy_rules, list) { + list_del(&entry->list); + kfree(entry); + } + mutex_unlock(&ima_measure_mutex); +} -- cgit v1.2.3 From f4bd857bc8ed997c25ec06b56ef8064aafa6d4f3 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:07:01 -0500 Subject: integrity: IMA policy open Sequentialize access to the policy file - permit multiple attempts to replace default policy with a valid policy Signed-off-by: Mimi Zohar Acked-by: Serge Hallyn Signed-off-by: James Morris --- security/integrity/ima/ima_fs.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index 95ef1caa64b5..573780c76f1f 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -277,16 +277,30 @@ static struct dentry *runtime_measurements_count; static struct dentry *violations; static struct dentry *ima_policy; +static atomic_t policy_opencount = ATOMIC_INIT(1); +/* + * ima_open_policy: sequentialize access to the policy file + */ +int ima_open_policy(struct inode * inode, struct file * filp) +{ + if (atomic_dec_and_test(&policy_opencount)) + return 0; + return -EBUSY; +} + /* * ima_release_policy - start using the new measure policy rules. * * Initially, ima_measure points to the default policy rules, now - * point to the new policy rules, and remove the securityfs policy file. + * point to the new policy rules, and remove the securityfs policy file, + * assuming a valid policy. */ static int ima_release_policy(struct inode *inode, struct file *file) { if (!valid_policy) { ima_delete_rules(); + valid_policy = 1; + atomic_set(&policy_opencount, 1); return 0; } ima_update_policy(); @@ -296,6 +310,7 @@ static int ima_release_policy(struct inode *inode, struct file *file) } static struct file_operations ima_measure_policy_ops = { + .open = ima_open_policy, .write = ima_write_policy, .release = ima_release_policy }; -- cgit v1.2.3 From 1df9f0a73178718969ae47d813b8e7aab2cf073c Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:07:02 -0500 Subject: Integrity: IMA file free imbalance The number of calls to ima_path_check()/ima_file_free() should be balanced. An extra call to fput(), indicates the file could have been accessed without first being measured. Although f_count is incremented/decremented in places other than fget/fput, like fget_light/fput_light and get_file, the current task must already hold a file refcnt. The call to __fput() is delayed until the refcnt becomes 0, resulting in ima_file_free() flagging any changes. - add hook to increment opencount for IPC shared memory(SYSV), shmat files, and /dev/zero - moved NULL iint test in opencount_get() Signed-off-by: Mimi Zohar Acked-by: Serge Hallyn Signed-off-by: James Morris --- include/linux/ima.h | 6 ++++++ ipc/shm.c | 3 +++ mm/shmem.c | 2 ++ security/integrity/ima/ima.h | 2 ++ security/integrity/ima/ima_iint.c | 17 ++++++++++++++++ security/integrity/ima/ima_main.c | 42 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 72 insertions(+) diff --git a/include/linux/ima.h b/include/linux/ima.h index dcc3664feee8..6db30a328d98 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -19,6 +19,7 @@ extern void ima_inode_free(struct inode *inode); extern int ima_path_check(struct path *path, int mask); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); +extern void ima_shm_check(struct file *file); #else static inline int ima_bprm_check(struct linux_binprm *bprm) @@ -50,5 +51,10 @@ static inline int ima_file_mmap(struct file *file, unsigned long prot) { return 0; } + +static inline void ima_shm_check(struct file *file) +{ + return; +} #endif /* CONFIG_IMA_H */ #endif /* _LINUX_IMA_H */ diff --git a/ipc/shm.c b/ipc/shm.c index 38a055758a9b..d39bd7637b1c 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -381,6 +382,7 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params) error = PTR_ERR(file); if (IS_ERR(file)) goto no_file; + ima_shm_check(file); id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni); if (id < 0) { @@ -888,6 +890,7 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr) file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations); if (!file) goto out_free; + ima_shm_check(file); file->private_data = sfd; file->f_mapping = shp->shm_file->f_mapping; diff --git a/mm/shmem.c b/mm/shmem.c index f1b0d4871f3a..dd5588f5d939 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -2600,6 +2601,7 @@ int shmem_zero_setup(struct vm_area_struct *vma) if (IS_ERR(file)) return PTR_ERR(file); + ima_shm_check(file); if (vma->vm_file) fput(vma->vm_file); vma->vm_file = file; diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 42706b554921..e3c16a21a38e 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -97,6 +97,7 @@ static inline unsigned long ima_hash_key(u8 *digest) /* iint cache flags */ #define IMA_MEASURED 1 +#define IMA_IINT_DUMP_STACK 512 /* integrity data associated with an inode */ struct ima_iint_cache { @@ -106,6 +107,7 @@ struct ima_iint_cache { struct mutex mutex; /* protects: version, flags, digest */ long readcount; /* measured files readcount */ long writecount; /* measured files writecount */ + long opencount; /* opens reference count */ struct kref refcount; /* ima_iint_cache reference count */ struct rcu_head rcu; }; diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index 750db3c993a7..1f035e8d29c7 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -126,6 +126,7 @@ struct ima_iint_cache *ima_iint_find_insert_get(struct inode *inode) return iint; } +EXPORT_SYMBOL_GPL(ima_iint_find_insert_get); /* iint_free - called when the iint refcount goes to zero */ void iint_free(struct kref *kref) @@ -134,6 +135,21 @@ void iint_free(struct kref *kref) refcount); iint->version = 0; iint->flags = 0UL; + if (iint->readcount != 0) { + printk(KERN_INFO "%s: readcount: %ld\n", __FUNCTION__, + iint->readcount); + iint->readcount = 0; + } + if (iint->writecount != 0) { + printk(KERN_INFO "%s: writecount: %ld\n", __FUNCTION__, + iint->writecount); + iint->writecount = 0; + } + if (iint->opencount != 0) { + printk(KERN_INFO "%s: opencount: %ld\n", __FUNCTION__, + iint->opencount); + iint->opencount = 0; + } kref_set(&iint->refcount, 1); kmem_cache_free(iint_cache, iint); } @@ -174,6 +190,7 @@ static void init_once(void *foo) mutex_init(&iint->mutex); iint->readcount = 0; iint->writecount = 0; + iint->opencount = 0; kref_set(&iint->refcount, 1); } diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 871e356e8d6c..f4e7266f5aee 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -66,6 +66,19 @@ void ima_file_free(struct file *file) return; mutex_lock(&iint->mutex); + if (iint->opencount <= 0) { + printk(KERN_INFO + "%s: %s open/free imbalance (r:%ld w:%ld o:%ld f:%ld)\n", + __FUNCTION__, file->f_dentry->d_name.name, + iint->readcount, iint->writecount, + iint->opencount, atomic_long_read(&file->f_count)); + if (!(iint->flags & IMA_IINT_DUMP_STACK)) { + dump_stack(); + iint->flags |= IMA_IINT_DUMP_STACK; + } + } + iint->opencount--; + if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) iint->readcount--; @@ -119,6 +132,7 @@ static int get_path_measurement(struct ima_iint_cache *iint, struct file *file, pr_info("%s dentry_open failed\n", filename); return rc; } + iint->opencount++; iint->readcount++; rc = ima_collect_measurement(iint, file); @@ -159,6 +173,7 @@ int ima_path_check(struct path *path, int mask) return 0; mutex_lock(&iint->mutex); + iint->opencount++; if ((mask & MAY_WRITE) || (mask == 0)) iint->writecount++; else if (mask & (MAY_READ | MAY_EXEC)) @@ -219,6 +234,21 @@ out: return rc; } +static void opencount_get(struct file *file) +{ + struct inode *inode = file->f_dentry->d_inode; + struct ima_iint_cache *iint; + + if (!ima_initialized || !S_ISREG(inode->i_mode)) + return; + iint = ima_iint_find_insert_get(inode); + if (!iint) + return; + mutex_lock(&iint->mutex); + iint->opencount++; + mutex_unlock(&iint->mutex); +} + /** * ima_file_mmap - based on policy, collect/store measurement. * @file: pointer to the file to be measured (May be NULL) @@ -242,6 +272,18 @@ int ima_file_mmap(struct file *file, unsigned long prot) return 0; } +/* + * ima_shm_check - IPC shm and shmat create/fput a file + * + * Maintain the opencount for these files to prevent unnecessary + * imbalance messages. + */ +void ima_shm_check(struct file *file) +{ + opencount_get(file); + return; +} + /** * ima_bprm_check - based on policy, collect/store measurement. * @bprm: contains the linux_binprm structure -- cgit v1.2.3 From aa7168f47d912459a99a01c93714f447b44bfa72 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 4 Feb 2009 09:07:03 -0500 Subject: Integrity: IMA update maintainers Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6bd7d47ab9db..12fc2805ab41 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2175,6 +2175,11 @@ M: stefanr@s5r6.in-berlin.de L: linux1394-devel@lists.sourceforge.net S: Maintained +INTEGRITY MEASUREMENT ARCHITECTURE (IMA) +P: Mimi Zohar +M: zohar@us.ibm.com +S: Supported + IMS TWINTURBO FRAMEBUFFER DRIVER L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Orphan -- cgit v1.2.3 From 64c61d80a6e4c935a09ac5ff1d952967ca1268f8 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 5 Feb 2009 09:28:26 +1100 Subject: IMA: fix ima_delete_rules() definition Fix ima_delete_rules() definition so sparse doesn't complain. Signed-off-by: James Morris --- security/integrity/ima/ima_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index bd453603e2c3..23810e0bfc68 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -400,7 +400,7 @@ int ima_parse_add_rule(char *rule) } /* ima_delete_rules called to cleanup invalid policy */ -void ima_delete_rules() +void ima_delete_rules(void) { struct ima_measure_rule_entry *entry, *tmp; -- cgit v1.2.3 From 8920d5ad6ba74ae8ab020e90cc4d976980e68701 Mon Sep 17 00:00:00 2001 From: Rajiv Andrade Date: Thu, 5 Feb 2009 13:06:30 -0200 Subject: TPM: integrity fix Fix to function which is called by IMA, now tpm_chip_find_get() considers the case in which the machine doesn't have a TPM or, if it has, its TPM isn't enabled. Signed-off-by: Mimi Zohar Signed-off-by: Rajiv Andrade Acked-by: Serge Hallyn Signed-off-by: James Morris --- drivers/char/tpm/tpm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 62a5682578ca..ccdd828adcef 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -666,18 +666,20 @@ EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated); */ static struct tpm_chip *tpm_chip_find_get(int chip_num) { - struct tpm_chip *pos; + struct tpm_chip *pos, *chip = NULL; rcu_read_lock(); list_for_each_entry_rcu(pos, &tpm_chip_list, list) { if (chip_num != TPM_ANY_NUM && chip_num != pos->dev_num) continue; - if (try_module_get(pos->dev->driver->owner)) + if (try_module_get(pos->dev->driver->owner)) { + chip = pos; break; + } } rcu_read_unlock(); - return pos; + return chip; } #define TPM_ORDINAL_PCRREAD cpu_to_be32(21) -- cgit v1.2.3 From b25c9da19889e33bb4ee2dff369fc46caa4543b0 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 6 Feb 2009 15:02:27 +0800 Subject: ALSA: enable concurrent digital outputs for ALC1200 Add the SPDIF pin as slave digital out to enable concurrent HDMI/SPDIF outputs for ASUS M3A-H/HDMI with ALC1200 codec. Tested-by: Thomas Schneider Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_local.h | 1 + sound/pci/hda/patch_realtek.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index ec687b206c0a..4086491ed33a 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -229,6 +229,7 @@ struct hda_multi_out { hda_nid_t hp_nid; /* optional DAC for HP, 0 when not exists */ hda_nid_t extra_out_nid[3]; /* optional DACs, 0 when not exists */ hda_nid_t dig_out_nid; /* digital out audio widget */ + hda_nid_t *slave_dig_outs; int max_channels; /* currently supported analog channels */ int dig_out_used; /* current usage of digital out (HDA_DIG_XXX) */ int no_share_stream; /* don't share a stream with multiple pins */ diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d2812ab729cc..5194a58fafaa 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -349,6 +349,7 @@ struct alc_config_preset { hda_nid_t *dac_nids; hda_nid_t dig_out_nid; /* optional */ hda_nid_t hp_nid; /* optional */ + hda_nid_t *slave_dig_outs; unsigned int num_adc_nids; hda_nid_t *adc_nids; hda_nid_t *capsrc_nids; @@ -824,6 +825,7 @@ static void setup_preset(struct alc_spec *spec, spec->multiout.num_dacs = preset->num_dacs; spec->multiout.dac_nids = preset->dac_nids; spec->multiout.dig_out_nid = preset->dig_out_nid; + spec->multiout.slave_dig_outs = preset->slave_dig_outs; spec->multiout.hp_nid = preset->hp_nid; spec->num_mux_defs = preset->num_mux_defs; @@ -3107,6 +3109,7 @@ static int alc_build_pcms(struct hda_codec *codec) /* SPDIF for stream index #1 */ if (spec->multiout.dig_out_nid || spec->dig_in_nid) { codec->num_pcms = 2; + codec->slave_dig_outs = spec->multiout.slave_dig_outs; info = spec->pcm_rec + 1; info->name = spec->stream_name_digital; if (spec->dig_out_type) @@ -8603,6 +8606,10 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { {} }; +static hda_nid_t alc1200_slave_dig_outs[] = { + ALC883_DIGOUT_NID, 0, +}; + static struct alc_config_preset alc883_presets[] = { [ALC883_3ST_2ch_DIG] = { .mixers = { alc883_3ST_2ch_mixer }, @@ -8943,6 +8950,7 @@ static struct alc_config_preset alc883_presets[] = { .dac_nids = alc883_dac_nids, .dig_out_nid = ALC1200_DIGOUT_NID, .dig_in_nid = ALC883_DIGIN_NID, + .slave_dig_outs = alc1200_slave_dig_outs, .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes), .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, -- cgit v1.2.3 From 92a950ff2b7091a735c32a6e57b8136650bc7812 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Feb 2009 18:12:34 +0800 Subject: ASoC: Blackfin: cleanup sport handling in ASoC Blackfin AC97 code - make sport number handling more dynamic as not all Blackfins have a linear sport map starting at 0 - indexes can be macroed away too Signed-off-by: Mike Frysinger Signed-off-by: Cliff Cai Signed-off-by: Bryan Wu Signed-off-by: Mark Brown --- sound/soc/blackfin/bf5xx-ac97.c | 92 +++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 59 deletions(-) diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c index 3be2be60576d..5885702c78ff 100644 --- a/sound/soc/blackfin/bf5xx-ac97.c +++ b/sound/soc/blackfin/bf5xx-ac97.c @@ -31,72 +31,46 @@ #include "bf5xx-sport.h" #include "bf5xx-ac97.h" -#if defined(CONFIG_BF54x) -#define PIN_REQ_SPORT_0 {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, \ - P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0} - -#define PIN_REQ_SPORT_1 {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, \ - P_SPORT1_RFS, P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0} - -#define PIN_REQ_SPORT_2 {P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, \ - P_SPORT2_RFS, P_SPORT2_DRPRI, P_SPORT2_RSCLK, 0} - -#define PIN_REQ_SPORT_3 {P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, \ - P_SPORT3_RFS, P_SPORT3_DRPRI, P_SPORT3_RSCLK, 0} -#else -#define PIN_REQ_SPORT_0 {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \ - P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0} - -#define PIN_REQ_SPORT_1 {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \ - P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0} -#endif - static int *cmd_count; static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM; +#define SPORT_REQ(x) \ + [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ + P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0} static u16 sport_req[][7] = { - PIN_REQ_SPORT_0, -#ifdef PIN_REQ_SPORT_1 - PIN_REQ_SPORT_1, +#ifdef SPORT0_TCR1 + SPORT_REQ(0), #endif -#ifdef PIN_REQ_SPORT_2 - PIN_REQ_SPORT_2, +#ifdef SPORT1_TCR1 + SPORT_REQ(1), #endif -#ifdef PIN_REQ_SPORT_3 - PIN_REQ_SPORT_3, +#ifdef SPORT2_TCR1 + SPORT_REQ(2), #endif - }; +#ifdef SPORT3_TCR1 + SPORT_REQ(3), +#endif +}; +#define SPORT_PARAMS(x) \ + [x] = { \ + .dma_rx_chan = CH_SPORT##x##_RX, \ + .dma_tx_chan = CH_SPORT##x##_TX, \ + .err_irq = IRQ_SPORT##x##_ERROR, \ + .regs = (struct sport_register *)SPORT##x##_TCR1, \ + } static struct sport_param sport_params[4] = { - { - .dma_rx_chan = CH_SPORT0_RX, - .dma_tx_chan = CH_SPORT0_TX, - .err_irq = IRQ_SPORT0_ERROR, - .regs = (struct sport_register *)SPORT0_TCR1, - }, -#ifdef PIN_REQ_SPORT_1 - { - .dma_rx_chan = CH_SPORT1_RX, - .dma_tx_chan = CH_SPORT1_TX, - .err_irq = IRQ_SPORT1_ERROR, - .regs = (struct sport_register *)SPORT1_TCR1, - }, +#ifdef SPORT0_TCR1 + SPORT_PARAMS(0), #endif -#ifdef PIN_REQ_SPORT_2 - { - .dma_rx_chan = CH_SPORT2_RX, - .dma_tx_chan = CH_SPORT2_TX, - .err_irq = IRQ_SPORT2_ERROR, - .regs = (struct sport_register *)SPORT2_TCR1, - }, +#ifdef SPORT1_TCR1 + SPORT_PARAMS(1), #endif -#ifdef PIN_REQ_SPORT_3 - { - .dma_rx_chan = CH_SPORT3_RX, - .dma_tx_chan = CH_SPORT3_TX, - .err_irq = IRQ_SPORT3_ERROR, - .regs = (struct sport_register *)SPORT3_TCR1, - } +#ifdef SPORT2_TCR1 + SPORT_PARAMS(2), +#endif +#ifdef SPORT3_TCR1 + SPORT_PARAMS(3), #endif }; @@ -332,11 +306,11 @@ static int bf5xx_ac97_probe(struct platform_device *pdev, if (cmd_count == NULL) return -ENOMEM; - if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) { + if (peripheral_request_list(sport_req[sport_num], "soc-audio")) { pr_err("Requesting Peripherals failed\n"); ret = -EFAULT; goto peripheral_err; - } + } #ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET /* Request PB3 as reset pin */ @@ -385,7 +359,7 @@ sport_err: gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM); #endif gpio_err: - peripheral_free_list(&sport_req[sport_num][0]); + peripheral_free_list(sport_req[sport_num]); peripheral_err: free_page((unsigned long)cmd_count); cmd_count = NULL; @@ -398,7 +372,7 @@ static void bf5xx_ac97_remove(struct platform_device *pdev, { free_page((unsigned long)cmd_count); cmd_count = NULL; - peripheral_free_list(&sport_req[sport_num][0]); + peripheral_free_list(sport_req[sport_num]); #ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM); #endif -- cgit v1.2.3 From 8836c273e4d44d088157b7ccbd2c108cefe70565 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Feb 2009 18:12:35 +0800 Subject: ASoC: Blackfin: drop unnecessary dma casts Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Mark Brown --- sound/soc/blackfin/bf5xx-sport.c | 104 ++++++++++++++++----------------------- 1 file changed, 43 insertions(+), 61 deletions(-) diff --git a/sound/soc/blackfin/bf5xx-sport.c b/sound/soc/blackfin/bf5xx-sport.c index 3b99e484d555..b7953c8cf838 100644 --- a/sound/soc/blackfin/bf5xx-sport.c +++ b/sound/soc/blackfin/bf5xx-sport.c @@ -133,7 +133,7 @@ static void setup_desc(struct dmasg *desc, void *buf, int fragcount, int i; for (i = 0; i < fragcount; ++i) { - desc[i].next_desc_addr = (unsigned long)&(desc[i + 1]); + desc[i].next_desc_addr = &(desc[i + 1]); desc[i].start_addr = (unsigned long)buf + i*fragsize; desc[i].cfg = cfg; desc[i].x_count = x_count; @@ -143,12 +143,12 @@ static void setup_desc(struct dmasg *desc, void *buf, int fragcount, } /* make circular */ - desc[fragcount-1].next_desc_addr = (unsigned long)desc; + desc[fragcount-1].next_desc_addr = desc; - pr_debug("setup desc: desc0=%p, next0=%lx, desc1=%p," - "next1=%lx\nx_count=%x,y_count=%x,addr=0x%lx,cfs=0x%x\n", - &(desc[0]), desc[0].next_desc_addr, - &(desc[1]), desc[1].next_desc_addr, + pr_debug("setup desc: desc0=%p, next0=%p, desc1=%p," + "next1=%p\nx_count=%x,y_count=%x,addr=0x%lx,cfs=0x%x\n", + desc, desc[0].next_desc_addr, + desc+1, desc[1].next_desc_addr, desc[0].x_count, desc[0].y_count, desc[0].start_addr, desc[0].cfg); } @@ -184,22 +184,20 @@ static inline int sport_hook_rx_dummy(struct sport_device *sport) BUG_ON(sport->curr_rx_desc == sport->dummy_rx_desc); /* Maybe the dummy buffer descriptor ring is damaged */ - sport->dummy_rx_desc->next_desc_addr = \ - (unsigned long)(sport->dummy_rx_desc+1); + sport->dummy_rx_desc->next_desc_addr = sport->dummy_rx_desc + 1; local_irq_save(flags); - desc = (struct dmasg *)get_dma_next_desc_ptr(sport->dma_rx_chan); + desc = get_dma_next_desc_ptr(sport->dma_rx_chan); /* Copy the descriptor which will be damaged to backup */ temp_desc = *desc; desc->x_count = 0xa; desc->y_count = 0; - desc->next_desc_addr = (unsigned long)(sport->dummy_rx_desc); + desc->next_desc_addr = sport->dummy_rx_desc; local_irq_restore(flags); /* Waiting for dummy buffer descriptor is already hooked*/ while ((get_dma_curr_desc_ptr(sport->dma_rx_chan) - - sizeof(struct dmasg)) != - (unsigned long)sport->dummy_rx_desc) - ; + sizeof(struct dmasg)) != sport->dummy_rx_desc) + continue; sport->curr_rx_desc = sport->dummy_rx_desc; /* Restore the damaged descriptor */ *desc = temp_desc; @@ -210,14 +208,12 @@ static inline int sport_hook_rx_dummy(struct sport_device *sport) static inline int sport_rx_dma_start(struct sport_device *sport, int dummy) { if (dummy) { - sport->dummy_rx_desc->next_desc_addr = \ - (unsigned long) sport->dummy_rx_desc; + sport->dummy_rx_desc->next_desc_addr = sport->dummy_rx_desc; sport->curr_rx_desc = sport->dummy_rx_desc; } else sport->curr_rx_desc = sport->dma_rx_desc; - set_dma_next_desc_addr(sport->dma_rx_chan, \ - (unsigned long)(sport->curr_rx_desc)); + set_dma_next_desc_addr(sport->dma_rx_chan, sport->curr_rx_desc); set_dma_x_count(sport->dma_rx_chan, 0); set_dma_x_modify(sport->dma_rx_chan, 0); set_dma_config(sport->dma_rx_chan, (DMAFLOW_LARGE | NDSIZE_9 | \ @@ -231,14 +227,12 @@ static inline int sport_rx_dma_start(struct sport_device *sport, int dummy) static inline int sport_tx_dma_start(struct sport_device *sport, int dummy) { if (dummy) { - sport->dummy_tx_desc->next_desc_addr = \ - (unsigned long) sport->dummy_tx_desc; + sport->dummy_tx_desc->next_desc_addr = sport->dummy_tx_desc; sport->curr_tx_desc = sport->dummy_tx_desc; } else sport->curr_tx_desc = sport->dma_tx_desc; - set_dma_next_desc_addr(sport->dma_tx_chan, \ - (unsigned long)(sport->curr_tx_desc)); + set_dma_next_desc_addr(sport->dma_tx_chan, sport->curr_tx_desc); set_dma_x_count(sport->dma_tx_chan, 0); set_dma_x_modify(sport->dma_tx_chan, 0); set_dma_config(sport->dma_tx_chan, @@ -261,11 +255,9 @@ int sport_rx_start(struct sport_device *sport) BUG_ON(sport->curr_rx_desc != sport->dummy_rx_desc); local_irq_save(flags); while ((get_dma_curr_desc_ptr(sport->dma_rx_chan) - - sizeof(struct dmasg)) != - (unsigned long)sport->dummy_rx_desc) - ; - sport->dummy_rx_desc->next_desc_addr = - (unsigned long)(sport->dma_rx_desc); + sizeof(struct dmasg)) != sport->dummy_rx_desc) + continue; + sport->dummy_rx_desc->next_desc_addr = sport->dma_rx_desc; local_irq_restore(flags); sport->curr_rx_desc = sport->dma_rx_desc; } else { @@ -310,23 +302,21 @@ static inline int sport_hook_tx_dummy(struct sport_device *sport) BUG_ON(sport->dummy_tx_desc == NULL); BUG_ON(sport->curr_tx_desc == sport->dummy_tx_desc); - sport->dummy_tx_desc->next_desc_addr = \ - (unsigned long)(sport->dummy_tx_desc+1); + sport->dummy_tx_desc->next_desc_addr = sport->dummy_tx_desc + 1; /* Shorten the time on last normal descriptor */ local_irq_save(flags); - desc = (struct dmasg *)get_dma_next_desc_ptr(sport->dma_tx_chan); + desc = get_dma_next_desc_ptr(sport->dma_tx_chan); /* Store the descriptor which will be damaged */ temp_desc = *desc; desc->x_count = 0xa; desc->y_count = 0; - desc->next_desc_addr = (unsigned long)(sport->dummy_tx_desc); + desc->next_desc_addr = sport->dummy_tx_desc; local_irq_restore(flags); /* Waiting for dummy buffer descriptor is already hooked*/ while ((get_dma_curr_desc_ptr(sport->dma_tx_chan) - \ - sizeof(struct dmasg)) != \ - (unsigned long)sport->dummy_tx_desc) - ; + sizeof(struct dmasg)) != sport->dummy_tx_desc) + continue; sport->curr_tx_desc = sport->dummy_tx_desc; /* Restore the damaged descriptor */ *desc = temp_desc; @@ -347,11 +337,9 @@ int sport_tx_start(struct sport_device *sport) /* Hook the normal buffer descriptor */ local_irq_save(flags); while ((get_dma_curr_desc_ptr(sport->dma_tx_chan) - - sizeof(struct dmasg)) != - (unsigned long)sport->dummy_tx_desc) - ; - sport->dummy_tx_desc->next_desc_addr = - (unsigned long)(sport->dma_tx_desc); + sizeof(struct dmasg)) != sport->dummy_tx_desc) + continue; + sport->dummy_tx_desc->next_desc_addr = sport->dma_tx_desc; local_irq_restore(flags); sport->curr_tx_desc = sport->dma_tx_desc; } else { @@ -536,19 +524,17 @@ static int sport_config_rx_dummy(struct sport_device *sport) unsigned config; pr_debug("%s entered\n", __func__); -#if L1_DATA_A_LENGTH != 0 - desc = (struct dmasg *) l1_data_sram_alloc(2 * sizeof(*desc)); -#else - { + if (L1_DATA_A_LENGTH) + desc = l1_data_sram_zalloc(2 * sizeof(*desc)); + else { dma_addr_t addr; desc = dma_alloc_coherent(NULL, 2 * sizeof(*desc), &addr, 0); + memset(desc, 0, 2 * sizeof(*desc)); } -#endif if (desc == NULL) { pr_err("Failed to allocate memory for dummy rx desc\n"); return -ENOMEM; } - memset(desc, 0, 2 * sizeof(*desc)); sport->dummy_rx_desc = desc; desc->start_addr = (unsigned long)sport->dummy_buf; config = DMAFLOW_LARGE | NDSIZE_9 | compute_wdsize(sport->wdsize) @@ -559,8 +545,8 @@ static int sport_config_rx_dummy(struct sport_device *sport) desc->y_count = 0; desc->y_modify = 0; memcpy(desc+1, desc, sizeof(*desc)); - desc->next_desc_addr = (unsigned long)(desc+1); - desc[1].next_desc_addr = (unsigned long)desc; + desc->next_desc_addr = desc + 1; + desc[1].next_desc_addr = desc; return 0; } @@ -571,19 +557,17 @@ static int sport_config_tx_dummy(struct sport_device *sport) pr_debug("%s entered\n", __func__); -#if L1_DATA_A_LENGTH != 0 - desc = (struct dmasg *) l1_data_sram_alloc(2 * sizeof(*desc)); -#else - { + if (L1_DATA_A_LENGTH) + desc = l1_data_sram_zalloc(2 * sizeof(*desc)); + else { dma_addr_t addr; desc = dma_alloc_coherent(NULL, 2 * sizeof(*desc), &addr, 0); + memset(desc, 0, 2 * sizeof(*desc)); } -#endif if (!desc) { pr_err("Failed to allocate memory for dummy tx desc\n"); return -ENOMEM; } - memset(desc, 0, 2 * sizeof(*desc)); sport->dummy_tx_desc = desc; desc->start_addr = (unsigned long)sport->dummy_buf + \ sport->dummy_count; @@ -595,8 +579,8 @@ static int sport_config_tx_dummy(struct sport_device *sport) desc->y_count = 0; desc->y_modify = 0; memcpy(desc+1, desc, sizeof(*desc)); - desc->next_desc_addr = (unsigned long)(desc+1); - desc[1].next_desc_addr = (unsigned long)desc; + desc->next_desc_addr = desc + 1; + desc[1].next_desc_addr = desc; return 0; } @@ -872,17 +856,15 @@ struct sport_device *sport_init(struct sport_param *param, unsigned wdsize, sport->wdsize = wdsize; sport->dummy_count = dummy_count; -#if L1_DATA_A_LENGTH != 0 - sport->dummy_buf = l1_data_sram_alloc(dummy_count * 2); -#else - sport->dummy_buf = kmalloc(dummy_count * 2, GFP_KERNEL); -#endif + if (L1_DATA_A_LENGTH) + sport->dummy_buf = l1_data_sram_zalloc(dummy_count * 2); + else + sport->dummy_buf = kzalloc(dummy_count * 2, GFP_KERNEL); if (sport->dummy_buf == NULL) { pr_err("Failed to allocate dummy buffer\n"); goto __error; } - memset(sport->dummy_buf, 0, dummy_count * 2); ret = sport_config_rx_dummy(sport); if (ret) { pr_err("Failed to config rx dummy ring\n"); @@ -939,6 +921,7 @@ void sport_done(struct sport_device *sport) sport = NULL; } EXPORT_SYMBOL(sport_done); + /* * It is only used to send several bytes when dma is not enabled * sport controller is configured but not enabled. @@ -1029,4 +1012,3 @@ EXPORT_SYMBOL(sport_send_and_recv); MODULE_AUTHOR("Roy Huang"); MODULE_DESCRIPTION("SPORT driver for ADI Blackfin"); MODULE_LICENSE("GPL"); - -- cgit v1.2.3 From 85ef2375ef2ebbb2bf660ad3a27c644d0ebf1b1a Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 5 Feb 2009 17:56:02 -0600 Subject: ASoC: optimize init sequence of Freescale MPC8610 sound drivers In the Freescale MPC8610 sound drivers, relocate all code from the _prepare functions into the corresponding _hw_params functions. These drivers assumed that the sample size is known in the _prepare function and not in the _hw_params function, but this is not true. Move the code in fsl_dma_prepare() into fsl_dma_hw_param(). Create fsl_ssi_hw_params() and move the code from fsl_ssi_prepare() into it. Turn off snooping for DMA operations to/from I/O registers, since that's not necessary. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_dma.c | 178 +++++++++++++++++++++++------------------------- sound/soc/fsl/fsl_ssi.c | 19 +++--- 2 files changed, 94 insertions(+), 103 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 64993eda5679..58a3fa497503 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -464,11 +464,7 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) sizeof(struct fsl_dma_link_descriptor); for (i = 0; i < NUM_DMA_LINKS; i++) { - struct fsl_dma_link_descriptor *link = &dma_private->link[i]; - - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->next = cpu_to_be64(temp_link); + dma_private->link[i].next = cpu_to_be64(temp_link); temp_link += sizeof(struct fsl_dma_link_descriptor); } @@ -525,79 +521,9 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) * This function obtains hardware parameters about the opened stream and * programs the DMA controller accordingly. * - * Note that due to a quirk of the SSI's STX register, the target address - * for the DMA operations depends on the sample size. So we don't program - * the dest_addr (for playback -- source_addr for capture) fields in the - * link descriptors here. We do that in fsl_dma_prepare() - */ -static int fsl_dma_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct fsl_dma_private *dma_private = runtime->private_data; - - dma_addr_t temp_addr; /* Pointer to next period */ - - unsigned int i; - - /* Get all the parameters we need */ - size_t buffer_size = params_buffer_bytes(hw_params); - size_t period_size = params_period_bytes(hw_params); - - /* Initialize our DMA tracking variables */ - dma_private->period_size = period_size; - dma_private->num_periods = params_periods(hw_params); - dma_private->dma_buf_end = dma_private->dma_buf_phys + buffer_size; - dma_private->dma_buf_next = dma_private->dma_buf_phys + - (NUM_DMA_LINKS * period_size); - if (dma_private->dma_buf_next >= dma_private->dma_buf_end) - dma_private->dma_buf_next = dma_private->dma_buf_phys; - - /* - * The actual address in STX0 (destination for playback, source for - * capture) is based on the sample size, but we don't know the sample - * size in this function, so we'll have to adjust that later. See - * comments in fsl_dma_prepare(). - * - * The DMA controller does not have a cache, so the CPU does not - * need to tell it to flush its cache. However, the DMA - * controller does need to tell the CPU to flush its cache. - * That's what the SNOOP bit does. - * - * Also, even though the DMA controller supports 36-bit addressing, for - * simplicity we currently support only 32-bit addresses for the audio - * buffer itself. - */ - temp_addr = substream->dma_buffer.addr; - - for (i = 0; i < NUM_DMA_LINKS; i++) { - struct fsl_dma_link_descriptor *link = &dma_private->link[i]; - - link->count = cpu_to_be32(period_size); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - link->source_addr = cpu_to_be32(temp_addr); - else - link->dest_addr = cpu_to_be32(temp_addr); - - temp_addr += period_size; - } - - return 0; -} - -/** - * fsl_dma_prepare - prepare the DMA registers for playback. - * - * This function is called after the specifics of the audio data are known, - * i.e. snd_pcm_runtime is initialized. - * - * In this function, we finish programming the registers of the DMA - * controller that are dependent on the sample size. - * - * One of the drawbacks with big-endian is that when copying integers of - * different sizes to a fixed-sized register, the address to which the - * integer must be copied is dependent on the size of the integer. + * One drawback of big-endian is that when copying integers of different + * sizes to a fixed-sized register, the address to which the integer must be + * copied is dependent on the size of the integer. * * For example, if P is the address of a 32-bit register, and X is a 32-bit * integer, then X should be copied to address P. However, if X is a 16-bit @@ -613,22 +539,58 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * and 8 bytes at a time). So we do not support packed 24-bit samples. * 24-bit data must be padded to 32 bits. */ -static int fsl_dma_prepare(struct snd_pcm_substream *substream) +static int fsl_dma_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private = runtime->private_data; + + /* Number of bits per sample */ + unsigned int sample_size = + snd_pcm_format_physical_width(params_format(hw_params)); + + /* Number of bytes per frame */ + unsigned int frame_size = 2 * (sample_size / 8); + + /* Bus address of SSI STX register */ + dma_addr_t ssi_sxx_phys = dma_private->ssi_sxx_phys; + + /* Size of the DMA buffer, in bytes */ + size_t buffer_size = params_buffer_bytes(hw_params); + + /* Number of bytes per period */ + size_t period_size = params_period_bytes(hw_params); + + /* Pointer to next period */ + dma_addr_t temp_addr = substream->dma_buffer.addr; + + /* Pointer to DMA controller */ struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel; - u32 mr; + + u32 mr; /* DMA Mode Register */ + unsigned int i; - dma_addr_t ssi_sxx_phys; /* Bus address of SSI STX register */ - unsigned int frame_size; /* Number of bytes per frame */ - ssi_sxx_phys = dma_private->ssi_sxx_phys; + /* Initialize our DMA tracking variables */ + dma_private->period_size = period_size; + dma_private->num_periods = params_periods(hw_params); + dma_private->dma_buf_end = dma_private->dma_buf_phys + buffer_size; + dma_private->dma_buf_next = dma_private->dma_buf_phys + + (NUM_DMA_LINKS * period_size); + + if (dma_private->dma_buf_next >= dma_private->dma_buf_end) + /* This happens if the number of periods == NUM_DMA_LINKS */ + dma_private->dma_buf_next = dma_private->dma_buf_phys; mr = in_be32(&dma_channel->mr) & ~(CCSR_DMA_MR_BWC_MASK | CCSR_DMA_MR_SAHTS_MASK | CCSR_DMA_MR_DAHTS_MASK); - switch (runtime->sample_bits) { + /* Due to a quirk of the SSI's STX register, the target address + * for the DMA operations depends on the sample size. So we calculate + * that offset here. While we're at it, also tell the DMA controller + * how much data to transfer per sample. + */ + switch (sample_size) { case 8: mr |= CCSR_DMA_MR_DAHTS_1 | CCSR_DMA_MR_SAHTS_1; ssi_sxx_phys += 3; @@ -641,12 +603,12 @@ static int fsl_dma_prepare(struct snd_pcm_substream *substream) mr |= CCSR_DMA_MR_DAHTS_4 | CCSR_DMA_MR_SAHTS_4; break; default: + /* We should never get here */ dev_err(substream->pcm->card->dev, - "unsupported sample size %u\n", runtime->sample_bits); + "unsupported sample size %u\n", sample_size); return -EINVAL; } - frame_size = runtime->frame_bits / 8; /* * BWC should always be a multiple of the frame size. BWC determines * how many bytes are sent/received before the DMA controller checks the @@ -655,7 +617,6 @@ static int fsl_dma_prepare(struct snd_pcm_substream *substream) * capture, the receive FIFO is triggered when it contains one frame, so * we want to receive one frame at a time. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) mr |= CCSR_DMA_MR_BWC(2 * frame_size); else @@ -663,16 +624,48 @@ static int fsl_dma_prepare(struct snd_pcm_substream *substream) out_be32(&dma_channel->mr, mr); - /* - * Program the address of the DMA transfer to/from the SSI. - */ for (i = 0; i < NUM_DMA_LINKS; i++) { struct fsl_dma_link_descriptor *link = &dma_private->link[i]; - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + link->count = cpu_to_be32(period_size); + + /* Even though the DMA controller supports 36-bit addressing, + * for simplicity we allow only 32-bit addresses for the audio + * buffer itself. This was enforced in fsl_dma_new() with the + * DMA mask. + * + * The snoop bit tells the DMA controller whether it should tell + * the ECM to snoop during a read or write to an address. For + * audio, we use DMA to transfer data between memory and an I/O + * device (the SSI's STX0 or SRX0 register). Snooping is only + * needed if there is a cache, so we need to snoop memory + * addresses only. For playback, that means we snoop the source + * but not the destination. For capture, we snoop the + * destination but not the source. + * + * Note that failing to snoop properly is unlikely to cause + * cache incoherency if the period size is larger than the + * size of L1 cache. This is because filling in one period will + * flush out the data for the previous period. So if you + * increased period_bytes_min to a large enough size, you might + * get more performance by not snooping, and you'll still be + * okay. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + link->source_addr = cpu_to_be32(temp_addr); + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->dest_addr = cpu_to_be32(ssi_sxx_phys); - else + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP); + } else { link->source_addr = cpu_to_be32(ssi_sxx_phys); + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP); + + link->dest_addr = cpu_to_be32(temp_addr); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + } + + temp_addr += period_size; } return 0; @@ -808,7 +801,6 @@ static struct snd_pcm_ops fsl_dma_ops = { .ioctl = snd_pcm_lib_ioctl, .hw_params = fsl_dma_hw_params, .hw_free = fsl_dma_hw_free, - .prepare = fsl_dma_prepare, .pointer = fsl_dma_pointer, }; diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index c6d6eb71dc1d..6844009833db 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -400,7 +400,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, } /** - * fsl_ssi_prepare: prepare the SSI. + * fsl_ssi_hw_params - program the sample size * * Most of the SSI registers have been programmed in the startup function, * but the word length must be programmed here. Unfortunately, programming @@ -412,20 +412,19 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the * clock master. */ -static int fsl_ssi_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) +static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai) { - struct snd_pcm_runtime *runtime = substream->runtime; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; - - struct ccsr_ssi __iomem *ssi = ssi_private->ssi; + struct fsl_ssi_private *ssi_private = cpu_dai->private_data; if (substream == ssi_private->first_stream) { + struct ccsr_ssi __iomem *ssi = ssi_private->ssi; + unsigned int sample_size = + snd_pcm_format_width(params_format(hw_params)); u32 wl; /* The SSI should always be disabled at this points (SSIEN=0) */ - wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); + wl = CCSR_SSI_SxCCR_WL(sample_size); /* In synchronous mode, the SSI uses STCCR for capture */ clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); @@ -579,7 +578,7 @@ static struct snd_soc_dai fsl_ssi_dai_template = { }, .ops = { .startup = fsl_ssi_startup, - .prepare = fsl_ssi_prepare, + .hw_params = fsl_ssi_hw_params, .shutdown = fsl_ssi_shutdown, .trigger = fsl_ssi_trigger, .set_sysclk = fsl_ssi_set_sysclk, -- cgit v1.2.3 From 45bdd1c1bbac56876cb9c71649300013281e4b22 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Feb 2009 16:11:25 +0100 Subject: ALSA: hda - Create beep mixer controls dynamically for Realtek codecs Create beep mixer controls dynamically for Realtek codecs instead of static arrays. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 147 ++++++++++++++---------------------------- 1 file changed, 47 insertions(+), 100 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5194a58fafaa..3b3b483e2a91 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -255,6 +255,7 @@ struct alc_spec { struct snd_kcontrol_new *mixers[5]; /* mixer arrays */ unsigned int num_mixers; struct snd_kcontrol_new *cap_mixer; /* capture mixer */ + unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */ const struct hda_verb *init_verbs[5]; /* initialization verbs * don't forget NULL @@ -937,7 +938,7 @@ static void alc_mic_automute(struct hda_codec *codec) HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); } #else -#define alc_mic_automute(codec) /* NOP */ +#define alc_mic_automute(codec) do {} while(0) /* NOP */ #endif /* disabled */ /* unsolicited event for HP jack sensing */ @@ -1389,8 +1390,6 @@ static struct snd_kcontrol_new alc888_base_mixer[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -1497,8 +1496,6 @@ static struct snd_kcontrol_new alc880_three_stack_mixer[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -1720,8 +1717,6 @@ static struct snd_kcontrol_new alc880_six_stack_mixer[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", @@ -1898,13 +1893,6 @@ static struct snd_kcontrol_new alc880_asus_w1v_mixer[] = { { } /* end */ }; -/* additional mixers to alc880_asus_mixer */ -static struct snd_kcontrol_new alc880_pcbeep_mixer[] = { - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), - { } /* end */ -}; - /* TCL S700 */ static struct snd_kcontrol_new alc880_tcl_s700_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -1937,8 +1925,6 @@ static struct snd_kcontrol_new alc880_uniwill_mixer[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", @@ -2013,6 +1999,13 @@ static const char *alc_slave_sws[] = { static void alc_free_kctls(struct hda_codec *codec); +/* additional beep mixers; the actual parameters are overwritten at build */ +static struct snd_kcontrol_new alc_beep_mixer[] = { + HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_INPUT), + HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_INPUT), + { } /* end */ +}; + static int alc_build_controls(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -2048,6 +2041,21 @@ static int alc_build_controls(struct hda_codec *codec) return err; } + /* create beep controls if needed */ + if (spec->beep_amp) { + struct snd_kcontrol_new *knew; + for (knew = alc_beep_mixer; knew->name; knew++) { + struct snd_kcontrol *kctl; + kctl = snd_ctl_new1(knew, codec); + if (!kctl) + return -ENOMEM; + kctl->private_value = spec->beep_amp; + err = snd_hda_ctl_add(codec, kctl); + if (err < 0) + return err; + } + } + /* if we have no master control, let's create it */ if (!spec->no_analog && !snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) { @@ -3812,7 +3820,7 @@ static struct alc_config_preset alc880_presets[] = { .input_mux = &alc880_capture_source, }, [ALC880_UNIWILL_DIG] = { - .mixers = { alc880_asus_mixer, alc880_pcbeep_mixer }, + .mixers = { alc880_asus_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), @@ -3850,8 +3858,7 @@ static struct alc_config_preset alc880_presets[] = { .init_hook = alc880_uniwill_p53_hp_automute, }, [ALC880_FUJITSU] = { - .mixers = { alc880_fujitsu_mixer, - alc880_pcbeep_mixer, }, + .mixers = { alc880_fujitsu_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_uniwill_p53_init_verbs, alc880_beep_init_verbs }, @@ -4310,10 +4317,6 @@ static void alc880_auto_init(struct hda_codec *codec) alc_inithook(codec); } -/* - * OK, here we have finally the patch for ALC880 - */ - static void set_capture_mixer(struct alc_spec *spec) { static struct snd_kcontrol_new *caps[3] = { @@ -4325,6 +4328,13 @@ static void set_capture_mixer(struct alc_spec *spec) spec->cap_mixer = caps[spec->num_adc_nids - 1]; } +#define set_beep_amp(spec, nid, idx, dir) \ + ((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir)) + +/* + * OK, here we have finally the patch for ALC880 + */ + static int patch_alc880(struct hda_codec *codec) { struct alc_spec *spec; @@ -4392,6 +4402,7 @@ static int patch_alc880(struct hda_codec *codec) } } set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x0c; @@ -4541,12 +4552,6 @@ static struct snd_kcontrol_new alc260_input_mixer[] = { { } /* end */ }; -static struct snd_kcontrol_new alc260_pc_beep_mixer[] = { - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT), - { } /* end */ -}; - /* update HP, line and mono out pins according to the master switch */ static void alc260_hp_master_update(struct hda_codec *codec, hda_nid_t hp, hda_nid_t line, @@ -4738,8 +4743,6 @@ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = { HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT), ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT), { } /* end */ @@ -4784,8 +4787,6 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = { HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), { } /* end */ }; @@ -4803,8 +4804,6 @@ static struct snd_kcontrol_new alc260_will_mixer[] = { ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), { } /* end */ }; @@ -5308,8 +5307,6 @@ static struct snd_kcontrol_new alc260_test_mixer[] = { HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT), HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT), HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT), @@ -5737,8 +5734,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = { static struct alc_config_preset alc260_presets[] = { [ALC260_BASIC] = { .mixers = { alc260_base_output_mixer, - alc260_input_mixer, - alc260_pc_beep_mixer }, + alc260_input_mixer }, .init_verbs = { alc260_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_dac_nids), .dac_nids = alc260_dac_nids, @@ -5924,6 +5920,7 @@ static int patch_alc260(struct hda_codec *codec) } } set_capture_mixer(spec); + set_beep_amp(spec, 0x07, 0x05, HDA_INPUT); spec->vmaster_nid = 0x08; @@ -6095,8 +6092,6 @@ static struct snd_kcontrol_new alc882_base_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -6123,8 +6118,6 @@ static struct snd_kcontrol_new alc882_w2jc_mixer[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -6176,8 +6169,6 @@ static struct snd_kcontrol_new alc882_asus_a7m_mixer[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -6286,8 +6277,10 @@ static struct snd_kcontrol_new alc882_macpro_mixer[] = { HDA_CODEC_MUTE("Headphone Playback Switch", 0x18, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT), + /* FIXME: this looks suspicious... HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT), + */ { } /* end */ }; @@ -7153,6 +7146,7 @@ static int patch_alc882(struct hda_codec *codec) } } set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x0c; @@ -7429,8 +7423,6 @@ static struct snd_kcontrol_new alc883_base_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -7493,8 +7485,6 @@ static struct snd_kcontrol_new alc883_3ST_2ch_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -7518,8 +7508,6 @@ static struct snd_kcontrol_new alc883_3ST_6ch_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -7544,8 +7532,6 @@ static struct snd_kcontrol_new alc883_3ST_6ch_intel_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -7569,8 +7555,6 @@ static struct snd_kcontrol_new alc883_fivestack_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -9183,6 +9167,7 @@ static int patch_alc883(struct hda_codec *codec) if (!spec->cap_mixer) set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x0c; @@ -9235,8 +9220,6 @@ static struct snd_kcontrol_new alc262_base_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), - /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), @@ -9257,8 +9240,6 @@ static struct snd_kcontrol_new alc262_hippo1_mixer[] = { HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), - /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */ /*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), { } /* end */ @@ -9367,8 +9348,6 @@ static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = { HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("AUX IN Playback Volume", 0x0b, 0x06, HDA_INPUT), HDA_CODEC_MUTE("AUX IN Playback Switch", 0x0b, 0x06, HDA_INPUT), { } /* end */ @@ -9397,8 +9376,6 @@ static struct snd_kcontrol_new alc262_HP_BPC_WildWest_mixer[] = { HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -10073,8 +10050,6 @@ static struct snd_kcontrol_new alc262_fujitsu_mixer[] = { }, HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), @@ -11085,6 +11060,7 @@ static int patch_alc262(struct hda_codec *codec) } if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x0c; @@ -12205,8 +12181,6 @@ static struct snd_kcontrol_new alc269_base_mixer[] = { HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x0b, 0x4, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x0b, 0x4, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), @@ -12233,8 +12207,6 @@ static struct snd_kcontrol_new alc269_quanta_fl1_mixer[] = { HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Boost", 0x19, 0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x04, HDA_INPUT), { } }; @@ -12258,8 +12230,6 @@ static struct snd_kcontrol_new alc269_lifebook_mixer[] = { HDA_CODEC_VOLUME("Dock Mic Playback Volume", 0x0b, 0x03, HDA_INPUT), HDA_CODEC_MUTE("Dock Mic Playback Switch", 0x0b, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Dock Mic Boost", 0x1b, 0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x04, HDA_INPUT), { } }; @@ -12296,13 +12266,6 @@ static struct snd_kcontrol_new alc269_fujitsu_mixer[] = { { } /* end */ }; -/* beep control */ -static struct snd_kcontrol_new alc269_beep_mixer[] = { - HDA_CODEC_VOLUME("Beep Playback Volume", 0x0b, 0x4, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x0b, 0x4, HDA_INPUT), - { } /* end */ -}; - static struct hda_verb alc269_quanta_fl1_verbs[] = { {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, @@ -12749,13 +12712,6 @@ static int alc269_parse_auto_config(struct hda_codec *codec) if (spec->kctls.list) add_mixer(spec, spec->kctls.list); - /* create a beep mixer control if the pin 0x1d isn't assigned */ - for (i = 0; i < ARRAY_SIZE(spec->autocfg.input_pins); i++) - if (spec->autocfg.input_pins[i] == 0x1d) - break; - if (i >= ARRAY_SIZE(spec->autocfg.input_pins)) - add_mixer(spec, alc269_beep_mixer); - add_verb(spec, alc269_init_verbs); spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux[0]; @@ -12868,7 +12824,7 @@ static struct alc_config_preset alc269_presets[] = { .init_hook = alc269_eeepc_dmic_inithook, }, [ALC269_FUJITSU] = { - .mixers = { alc269_fujitsu_mixer, alc269_beep_mixer }, + .mixers = { alc269_fujitsu_mixer }, .cap_mixer = alc269_epc_capture_mixer, .init_verbs = { alc269_init_verbs, alc269_eeepc_dmic_init_verbs }, @@ -12955,6 +12911,7 @@ static int patch_alc269(struct hda_codec *codec) spec->capsrc_nids = alc269_capsrc_nids; if (!spec->cap_mixer) set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT); codec->patch_ops = alc_patch_ops; if (board_config == ALC269_AUTO) @@ -13205,8 +13162,6 @@ static struct snd_kcontrol_new alc861_asus_mixer[] = { static struct snd_kcontrol_new alc861_asus_laptop_mixer[] = { HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x23, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("PC Beep Playback Switch", 0x23, 0x0, HDA_OUTPUT), { } }; @@ -14049,6 +14004,8 @@ static int patch_alc861(struct hda_codec *codec) spec->stream_digital_playback = &alc861_pcm_digital_playback; spec->stream_digital_capture = &alc861_pcm_digital_capture; + set_beep_amp(spec, 0x23, 0, HDA_OUTPUT); + spec->vmaster_nid = 0x03; codec->patch_ops = alc_patch_ops; @@ -14205,9 +14162,6 @@ static struct snd_kcontrol_new alc861vd_6st_mixer[] = { HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), - { } /* end */ }; @@ -14231,9 +14185,6 @@ static struct snd_kcontrol_new alc861vd_3st_mixer[] = { HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), - { } /* end */ }; @@ -14272,8 +14223,6 @@ static struct snd_kcontrol_new alc861vd_dallas_mixer[] = { HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT), HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Beep Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beep Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -15015,6 +14964,7 @@ static int patch_alc861vd(struct hda_codec *codec) spec->capture_style = CAPT_MIX; set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x02; @@ -15203,8 +15153,6 @@ static struct snd_kcontrol_new alc662_3ST_2ch_mixer[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -15226,8 +15174,6 @@ static struct snd_kcontrol_new alc662_3ST_6ch_mixer[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; @@ -16832,6 +16778,7 @@ static int patch_alc662(struct hda_codec *codec) if (!spec->cap_mixer) set_capture_mixer(spec); + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x02; -- cgit v1.2.3 From c8dcdf829ca1827a802eae841dd04de8c9d6653f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Feb 2009 16:21:20 +0100 Subject: ALSA: hda - Add missing NULL check in snd_hda_create_spdif_in_ctls() Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c9158799ccb6..93412f335dc4 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1984,6 +1984,8 @@ int snd_hda_create_spdif_in_ctls(struct hda_codec *codec, hda_nid_t nid) } for (dig_mix = dig_in_ctls; dig_mix->name; dig_mix++) { kctl = snd_ctl_new1(dig_mix, codec); + if (!kctl) + return -ENOMEM; kctl->private_value = nid; err = snd_hda_ctl_add(codec, kctl); if (err < 0) -- cgit v1.2.3 From c44765b8c8bfc883c9868ab7aef37d27b5b14be8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Feb 2009 16:48:10 +0100 Subject: ALSA: hda - Clear codec->beep at release Clear codec->beep field in snd_hda_detach_beep_device() to be sure. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 960fd7970384..4de5bacd3929 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -138,6 +138,7 @@ void snd_hda_detach_beep_device(struct hda_codec *codec) input_unregister_device(beep->dev); kfree(beep); + codec->beep = NULL; } } EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device); -- cgit v1.2.3 From a4ddeba9c8896cba8c6ce7a98c0b5c755c15a746 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Feb 2009 17:21:09 +0100 Subject: ALSA: hda - Remove superfluous code in patch_realtek.c codec->spec is reset in the caller side. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 76934bc8b484..3d933e307b19 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3202,7 +3202,6 @@ static void alc_free(struct hda_codec *codec) alc_free_kctls(codec); kfree(spec); snd_hda_detach_beep_device(codec); - codec->spec = NULL; /* to be sure */ } #ifdef SND_HDA_NEEDS_RESUME -- cgit v1.2.3 From c5a4bcd0cac546c5d776af881c5e913ba4a9922d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Feb 2009 17:22:05 +0100 Subject: ALSA: hda - Use digital beep for AD codecs Use digital beep instead of analog pc-beep for AD codecs. Create the beep mixer controls dynamically on demand. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 140 +++++++++++++++++++++++++++---------------- 1 file changed, 88 insertions(+), 52 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 30399cbf8193..cc02f2df2510 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -27,11 +27,12 @@ #include #include "hda_codec.h" #include "hda_local.h" +#include "hda_beep.h" struct ad198x_spec { struct snd_kcontrol_new *mixers[5]; int num_mixers; - + unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */ const struct hda_verb *init_verbs[5]; /* initialization verbs * don't forget NULL termination! */ @@ -154,6 +155,16 @@ static const char *ad_slave_sws[] = { static void ad198x_free_kctls(struct hda_codec *codec); +/* additional beep mixers; the actual parameters are overwritten at build */ +static struct snd_kcontrol_new ad_beep_mixer[] = { + HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_OUTPUT), + { } /* end */ +}; + +#define set_beep_amp(spec, nid, idx, dir) \ + ((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir)) /* mono */ + static int ad198x_build_controls(struct hda_codec *codec) { struct ad198x_spec *spec = codec->spec; @@ -181,6 +192,21 @@ static int ad198x_build_controls(struct hda_codec *codec) return err; } + /* create beep controls if needed */ + if (spec->beep_amp) { + struct snd_kcontrol_new *knew; + for (knew = ad_beep_mixer; knew->name; knew++) { + struct snd_kcontrol *kctl; + kctl = snd_ctl_new1(knew, codec); + if (!kctl) + return -ENOMEM; + kctl->private_value = spec->beep_amp; + err = snd_hda_ctl_add(codec, kctl); + if (err < 0) + return err; + } + } + /* if we have no master control, let's create it */ if (!snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) { unsigned int vmaster_tlv[4]; @@ -397,7 +423,8 @@ static void ad198x_free(struct hda_codec *codec) return; ad198x_free_kctls(codec); - kfree(codec->spec); + kfree(spec); + snd_hda_detach_beep_device(codec); } static struct hda_codec_ops ad198x_patch_ops = { @@ -536,8 +563,6 @@ static struct snd_kcontrol_new ad1986a_mixers[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x18, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x18, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mono Playback Volume", 0x1e, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Mono Playback Switch", 0x1e, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), @@ -601,8 +626,7 @@ static struct snd_kcontrol_new ad1986a_laptop_mixers[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), - /* HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x18, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x18, 0x0, HDA_OUTPUT), + /* HDA_CODEC_VOLUME("Mono Playback Volume", 0x1e, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Mono Playback Switch", 0x1e, 0x0, HDA_OUTPUT), */ HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), @@ -800,8 +824,6 @@ static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x18, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x18, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT), { @@ -1026,7 +1048,7 @@ static int is_jack_available(struct hda_codec *codec, hda_nid_t nid) static int patch_ad1986a(struct hda_codec *codec) { struct ad198x_spec *spec; - int board_config; + int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -1034,6 +1056,13 @@ static int patch_ad1986a(struct hda_codec *codec) codec->spec = spec; + err = snd_hda_attach_beep_device(codec, 0x19); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x18, 0, HDA_OUTPUT); + spec->multiout.max_channels = 6; spec->multiout.num_dacs = ARRAY_SIZE(ad1986a_dac_nids); spec->multiout.dac_nids = ad1986a_dac_nids; @@ -1213,8 +1242,6 @@ static struct snd_kcontrol_new ad1983_mixers[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x12, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x13, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x13, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("PC Speaker Playback Volume", 0x10, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE_MONO("PC Speaker Playback Switch", 0x10, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Boost", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x15, 0x0, HDA_OUTPUT), @@ -1285,6 +1312,7 @@ static struct hda_amp_list ad1983_loopbacks[] = { static int patch_ad1983(struct hda_codec *codec) { struct ad198x_spec *spec; + int err; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -1292,6 +1320,13 @@ static int patch_ad1983(struct hda_codec *codec) codec->spec = spec; + err = snd_hda_attach_beep_device(codec, 0x10); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x10, 0, HDA_OUTPUT); + spec->multiout.max_channels = 2; spec->multiout.num_dacs = ARRAY_SIZE(ad1983_dac_nids); spec->multiout.dac_nids = ad1983_dac_nids; @@ -1361,8 +1396,6 @@ static struct snd_kcontrol_new ad1981_mixers[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x1c, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x1d, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x1d, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME_MONO("PC Speaker Playback Volume", 0x0d, 1, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE_MONO("PC Speaker Playback Switch", 0x0d, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_OUTPUT), @@ -1685,7 +1718,7 @@ static struct snd_pci_quirk ad1981_cfg_tbl[] = { static int patch_ad1981(struct hda_codec *codec) { struct ad198x_spec *spec; - int board_config; + int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -1693,6 +1726,13 @@ static int patch_ad1981(struct hda_codec *codec) codec->spec = spec; + err = snd_hda_attach_beep_device(codec, 0x10); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x0d, 0, HDA_OUTPUT); + spec->multiout.max_channels = 2; spec->multiout.num_dacs = ARRAY_SIZE(ad1981_dac_nids); spec->multiout.dac_nids = ad1981_dac_nids; @@ -1979,9 +2019,6 @@ static struct snd_kcontrol_new ad1988_6stack_mixers2[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x4, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x4, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Analog Mix Playback Volume", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Analog Mix Playback Switch", 0x21, 0x0, HDA_OUTPUT), @@ -2025,9 +2062,6 @@ static struct snd_kcontrol_new ad1988_3stack_mixers2[] = { HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x4, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x4, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Analog Mix Playback Volume", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Analog Mix Playback Switch", 0x21, 0x0, HDA_OUTPUT), @@ -2057,9 +2091,6 @@ static struct snd_kcontrol_new ad1988_laptop_mixers[] = { HDA_CODEC_VOLUME("Line Playback Volume", 0x20, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Analog Mix Playback Volume", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Analog Mix Playback Switch", 0x21, 0x0, HDA_OUTPUT), @@ -2919,7 +2950,7 @@ static struct snd_pci_quirk ad1988_cfg_tbl[] = { static int patch_ad1988(struct hda_codec *codec) { struct ad198x_spec *spec; - int board_config; + int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -2939,7 +2970,7 @@ static int patch_ad1988(struct hda_codec *codec) if (board_config == AD1988_AUTO) { /* automatic parse from the BIOS config */ - int err = ad1988_parse_auto_config(codec); + err = ad1988_parse_auto_config(codec); if (err < 0) { ad198x_free(codec); return err; @@ -2949,6 +2980,13 @@ static int patch_ad1988(struct hda_codec *codec) } } + err = snd_hda_attach_beep_device(codec, 0x10); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x10, 0, HDA_OUTPUT); + switch (board_config) { case AD1988_6STACK: case AD1988_6STACK_DIG: @@ -3105,12 +3143,6 @@ static struct snd_kcontrol_new ad1884_base_mixers[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x02, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x02, HDA_INPUT), - /* - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_VOLUME("Digital Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Digital Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT), - */ HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -3219,7 +3251,7 @@ static const char *ad1884_slave_vols[] = { "CD Playback Volume", "Internal Mic Playback Volume", "Docking Mic Playback Volume" - "Beep Playback Volume", + /* "Beep Playback Volume", */ "IEC958 Playback Volume", NULL }; @@ -3227,6 +3259,7 @@ static const char *ad1884_slave_vols[] = { static int patch_ad1884(struct hda_codec *codec) { struct ad198x_spec *spec; + int err; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -3234,6 +3267,13 @@ static int patch_ad1884(struct hda_codec *codec) codec->spec = spec; + err = snd_hda_attach_beep_device(codec, 0x10); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x10, 0, HDA_OUTPUT); + spec->multiout.max_channels = 2; spec->multiout.num_dacs = ARRAY_SIZE(ad1884_dac_nids); spec->multiout.dac_nids = ad1884_dac_nids; @@ -3300,8 +3340,6 @@ static struct snd_kcontrol_new ad1984_thinkpad_mixers[] = { HDA_CODEC_VOLUME("Mic Boost", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Boost", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Docking Mic Boost", 0x25, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x0d, 0x0, HDA_OUTPUT), @@ -3358,10 +3396,6 @@ static struct snd_kcontrol_new ad1984_dell_desktop_mixers[] = { HDA_CODEC_MUTE("Front Mic Playback Switch", 0x20, 0x00, HDA_INPUT), HDA_CODEC_VOLUME("Line-In Playback Volume", 0x20, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Line-In Playback Switch", 0x20, 0x01, HDA_INPUT), - /* - HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x20, 0x03, HDA_INPUT), - */ HDA_CODEC_VOLUME("Line-In Boost", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -3540,8 +3574,6 @@ static struct snd_kcontrol_new ad1884a_base_mixers[] = { HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x02, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Line Boost", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x25, 0x0, HDA_OUTPUT), @@ -3674,8 +3706,6 @@ static struct snd_kcontrol_new ad1884a_laptop_mixers[] = { HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x20, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Dock Mic Playback Volume", 0x20, 0x04, HDA_INPUT), HDA_CODEC_MUTE("Dock Mic Playback Switch", 0x20, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Boost", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Dock Mic Boost", 0x25, 0x0, HDA_OUTPUT), @@ -3703,8 +3733,6 @@ static struct snd_kcontrol_new ad1884a_mobile_mixers[] = { HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT), HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -3815,8 +3843,6 @@ static struct snd_kcontrol_new ad1984a_thinkpad_mixers[] = { HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x00, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x00, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x14, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Boost", 0x17, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), @@ -3902,7 +3928,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = { static int patch_ad1884a(struct hda_codec *codec) { struct ad198x_spec *spec; - int board_config; + int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -3910,6 +3936,13 @@ static int patch_ad1884a(struct hda_codec *codec) codec->spec = spec; + err = snd_hda_attach_beep_device(codec, 0x10); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x10, 0, HDA_OUTPUT); + spec->multiout.max_channels = 2; spec->multiout.num_dacs = ARRAY_SIZE(ad1884a_dac_nids); spec->multiout.dac_nids = ad1884a_dac_nids; @@ -4064,8 +4097,6 @@ static struct snd_kcontrol_new ad1882_loopback_mixers[] = { HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT), { } /* end */ }; @@ -4078,8 +4109,6 @@ static struct snd_kcontrol_new ad1882a_loopback_mixers[] = { HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT), - HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT), - HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT), HDA_CODEC_VOLUME("Digital Mic Boost", 0x1f, 0x0, HDA_INPUT), { } /* end */ }; @@ -4238,7 +4267,7 @@ static const char *ad1882_models[AD1986A_MODELS] = { static int patch_ad1882(struct hda_codec *codec) { struct ad198x_spec *spec; - int board_config; + int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -4246,6 +4275,13 @@ static int patch_ad1882(struct hda_codec *codec) codec->spec = spec; + err = snd_hda_attach_beep_device(codec, 0x10); + if (err < 0) { + ad198x_free(codec); + return err; + } + set_beep_amp(spec, 0x10, 0, HDA_OUTPUT); + spec->multiout.max_channels = 6; spec->multiout.num_dacs = 3; spec->multiout.dac_nids = ad1882_dac_nids; -- cgit v1.2.3 From cfb9fb5517faa9e61c7e874fc89ef9c9253a0902 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Feb 2009 17:34:03 +0100 Subject: ALSA: hda - Fix unused variable compile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sound/pci/hda/patch_realtek.c:12693: warning: unused variable ‘i’ Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3d933e307b19..f594a0960290 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12690,7 +12690,7 @@ static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec, static int alc269_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - int i, err; + int err; static hda_nid_t alc269_ignore[] = { 0x1d, 0 }; err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, -- cgit v1.2.3 From 8f0dc655f9efa3fc81b8cdaf5aa1f2779f8db46d Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 7 Feb 2009 14:01:58 +0100 Subject: ASoC: Add initial support of Mitac mioa701 device SoC. This machine driver enables sound functions on Mitac mio a701 smartphone. Build upon ASoC v1, it handles : - rear speaker - front speaker - microphone - GSM A global "Mio Mode" switch is not yet provided to cope with audio path setup. As balance on audio chip line is no more assured, an incorrect setup can produce a lot of heat and even fry the battery behind the wm9713 and the speaker amplifier. It doesn't cope with : - headset jack - mio master mode - master volume control This driver is backported from ASoc v2, and amputated from scenario setups and master volume control. [Minor mods for terminology in comments -- broonie] Signed-off-by: Robert Jarzmik Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/mioa701_wm9713.c | 250 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 261 insertions(+) create mode 100644 sound/soc/pxa/mioa701_wm9713.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 958ac3fe15d1..5998ab366e83 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -115,3 +115,12 @@ config SND_SOC_ZYLONITE help Say Y if you want to add support for SoC audio on the Marvell Zylonite reference platform. + +config SND_PXA2XX_SOC_MIOA701 + tristate "SoC Audio support for MIO A701" + depends on SND_PXA2XX_SOC && MACH_MIOA701 + select SND_PXA2XX_SOC_AC97 + select SND_SOC_WM9713 + help + Say Y if you want to add support for SoC audio on the + MIO A701. diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 97a51a8c936c..8ed881c5e5cc 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -20,6 +20,7 @@ snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o snd-soc-zylonite-objs := zylonite.o +snd-soc-mioa701-objs := mioa701_wm9713.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o @@ -30,4 +31,5 @@ obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o +obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c new file mode 100644 index 000000000000..19eda8bbfdaf --- /dev/null +++ b/sound/soc/pxa/mioa701_wm9713.c @@ -0,0 +1,250 @@ +/* + * Handles the Mitac mioa701 SoC system + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation in version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This is a little schema of the sound interconnections : + * + * Sagem X200 Wolfson WM9713 + * +--------+ +-------------------+ Rear Speaker + * | | | | /-+ + * | +--->----->---+MONOIN SPKL+--->----+-+ | + * | GSM | | | | | | + * | +--->----->---+PCBEEP SPKR+--->----+-+ | + * | CHIP | | | \-+ + * | +---<-----<---+MONO | + * | | | | Front Speaker + * +--------+ | | /-+ + * | HPL+--->----+-+ | + * | | | | | + * | OUT3+--->----+-+ | + * | | \-+ + * | | + * | | Front Micro + * | | + + * | MIC1+-----<--+o+ + * | | + + * +-------------------+ --- + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" +#include "../codecs/wm9713.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +#define AC97_GPIO_PULL 0x58 + +/* Use GPIO8 for rear speaker amplifier */ +static int rear_amp_power(struct snd_soc_codec *codec, int power) +{ + unsigned short reg; + + if (power) { + reg = snd_soc_read(codec, AC97_GPIO_CFG); + snd_soc_write(codec, AC97_GPIO_CFG, reg | 0x0100); + reg = snd_soc_read(codec, AC97_GPIO_PULL); + snd_soc_write(codec, AC97_GPIO_PULL, reg | (1<<15)); + } else { + reg = snd_soc_read(codec, AC97_GPIO_CFG); + snd_soc_write(codec, AC97_GPIO_CFG, reg & ~0x0100); + reg = snd_soc_read(codec, AC97_GPIO_PULL); + snd_soc_write(codec, AC97_GPIO_PULL, reg & ~(1<<15)); + } + + return 0; +} + +static int rear_amp_event(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *kctl, int event) +{ + struct snd_soc_codec *codec = widget->codec; + + return rear_amp_power(codec, SND_SOC_DAPM_EVENT_ON(event)); +} + +/* mioa701 machine dapm widgets */ +static const struct snd_soc_dapm_widget mioa701_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Front Speaker", NULL), + SND_SOC_DAPM_SPK("Rear Speaker", rear_amp_event), + SND_SOC_DAPM_MIC("Headset", NULL), + SND_SOC_DAPM_LINE("GSM Line Out", NULL), + SND_SOC_DAPM_LINE("GSM Line In", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Front Mic", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* Call Mic */ + {"Mic Bias", NULL, "Front Mic"}, + {"MIC1", NULL, "Mic Bias"}, + + /* Headset Mic */ + {"LINEL", NULL, "Headset Mic"}, + {"LINER", NULL, "Headset Mic"}, + + /* GSM Module */ + {"MONOIN", NULL, "GSM Line Out"}, + {"PCBEEP", NULL, "GSM Line Out"}, + {"GSM Line In", NULL, "MONO"}, + + /* headphone connected to HPL, HPR */ + {"Headset", NULL, "HPL"}, + {"Headset", NULL, "HPR"}, + + /* front speaker connected to HPL, OUT3 */ + {"Front Speaker", NULL, "HPL"}, + {"Front Speaker", NULL, "OUT3"}, + + /* rear speaker connected to SPKL, SPKR */ + {"Rear Speaker", NULL, "SPKL"}, + {"Rear Speaker", NULL, "SPKR"}, +}; + +static int mioa701_wm9713_init(struct snd_soc_codec *codec) +{ + unsigned short reg; + + /* Add mioa701 specific widgets */ + snd_soc_dapm_new_controls(codec, ARRAY_AND_SIZE(mioa701_dapm_widgets)); + + /* Set up mioa701 specific audio path audio_mapnects */ + snd_soc_dapm_add_routes(codec, ARRAY_AND_SIZE(audio_map)); + + /* Prepare GPIO8 for rear speaker amplifier */ + reg = codec->read(codec, AC97_GPIO_CFG); + codec->write(codec, AC97_GPIO_CFG, reg | 0x0100); + + /* Prepare MIC input */ + reg = codec->read(codec, AC97_3D_CONTROL); + codec->write(codec, AC97_3D_CONTROL, reg | 0xc000); + + snd_soc_dapm_enable_pin(codec, "Front Speaker"); + snd_soc_dapm_enable_pin(codec, "Rear Speaker"); + snd_soc_dapm_enable_pin(codec, "Front Mic"); + snd_soc_dapm_enable_pin(codec, "GSM Line In"); + snd_soc_dapm_enable_pin(codec, "GSM Line Out"); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_ops mioa701_ops; + +static struct snd_soc_dai_link mioa701_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9713_dai[WM9713_DAI_AC97_HIFI], + .init = mioa701_wm9713_init, + .ops = &mioa701_ops, + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9713_dai[WM9713_DAI_AC97_AUX], + .ops = &mioa701_ops, + }, +}; + +static struct snd_soc_card mioa701 = { + .name = "MioA701", + .platform = &pxa2xx_soc_platform, + .dai_link = mioa701_dai, + .num_links = ARRAY_SIZE(mioa701_dai), +}; + +static struct snd_soc_device mioa701_snd_devdata = { + .card = &mioa701, + .codec_dev = &soc_codec_dev_wm9713, +}; + +static struct platform_device *mioa701_snd_device; + +static int mioa701_wm9713_probe(struct platform_device *pdev) +{ + int ret; + + if (!machine_is_mioa701()) + return -ENODEV; + + dev_warn(&pdev->dev, "Be warned that incorrect mixers/muxes setup will" + "lead to overheating and possible destruction of your device." + "Do not use without a good knowledge of mio's board design!\n"); + + mioa701_snd_device = platform_device_alloc("soc-audio", -1); + if (!mioa701_snd_device) + return -ENOMEM; + + platform_set_drvdata(mioa701_snd_device, &mioa701_snd_devdata); + mioa701_snd_devdata.dev = &mioa701_snd_device->dev; + + ret = platform_device_add(mioa701_snd_device); + if (!ret) + return 0; + + platform_device_put(mioa701_snd_device); + return ret; +} + +static int __devexit mioa701_wm9713_remove(struct platform_device *pdev) +{ + platform_device_unregister(mioa701_snd_device); + return 0; +} + +static struct platform_driver mioa701_wm9713_driver = { + .probe = mioa701_wm9713_probe, + .remove = __devexit_p(mioa701_wm9713_remove), + .driver = { + .name = "mioa701-wm9713", + .owner = THIS_MODULE, + }, +}; + +static int __init mioa701_asoc_init(void) +{ + return platform_driver_register(&mioa701_wm9713_driver); +} + +static void __exit mioa701_asoc_exit(void) +{ + platform_driver_unregister(&mioa701_wm9713_driver); +} + +module_init(mioa701_asoc_init); +module_exit(mioa701_asoc_exit); + +/* Module information */ +MODULE_AUTHOR("Robert Jarzmik (rjarzmik@free.fr)"); +MODULE_DESCRIPTION("ALSA SoC WM9713 MIO A701"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 67137a5d46d5a7c4cbdc66f03d1e2f397fe14b2b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 8 Feb 2009 18:17:37 +0100 Subject: ASoC: count reaches 10001, not 10000. With a postfix increment count reaches 10001, not 10000. Signed-off-by: Mark Brown --- sound/soc/blackfin/bf5xx-ad73311.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c index 7f2a5e199075..edfbdc024e66 100644 --- a/sound/soc/blackfin/bf5xx-ad73311.c +++ b/sound/soc/blackfin/bf5xx-ad73311.c @@ -114,7 +114,7 @@ static int snd_ad73311_configure(void) SSYNC(); /* When TUVF is set, the data is already send out */ - while (!(status & TUVF) && count++ < 10000) { + while (!(status & TUVF) && ++count < 10000) { udelay(1); status = bfin_read_SPORT_STAT(); SSYNC(); @@ -123,7 +123,7 @@ static int snd_ad73311_configure(void) SSYNC(); local_irq_enable(); - if (count == 10000) { + if (count >= 10000) { printk(KERN_ERR "ad73311: failed to configure codec\n"); return -1; } -- cgit v1.2.3 From 4e7f78f815412fd25b207b8c63a698b637c9621d Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 5 Feb 2009 17:48:19 +0100 Subject: pxa/h5000: Setup I2S pins for pxa2xx-i2s The iPAQ h5000 has an AK4535 codec connected as I2S slave, PXA I2S providing SYSCLK. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Mark Brown --- arch/arm/mach-pxa/h5000.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index da6e4422c0f3..295ec413d804 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -153,6 +153,13 @@ static unsigned long h5000_pin_config[] __initdata = { GPIO23_SSP1_SCLK, GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO32_I2S_SYSCLK, }; /* -- cgit v1.2.3 From 772885c1dc42f1992ac4fc937f1ed4ae9d42a31e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 5 Feb 2009 17:48:20 +0100 Subject: pxa/spitz: Setup I2S pins for pxa2xx-i2s The spitz has a WM8750 codec connected as I2S slave but doesn't use the PXA I2S system clock. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Mark Brown --- arch/arm/mach-pxa/spitz.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6d447c9ce8ab..0d62d311d41a 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -105,6 +105,12 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO57_nIOIS16, GPIO104_PSKTSEL, + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + /* MMC */ GPIO32_MMC_CLK, GPIO112_MMC_CMD, -- cgit v1.2.3 From 44dd2b9168350b82a671ce71666b99208ab2d973 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 5 Feb 2009 17:48:21 +0100 Subject: ASoC: pxa2xx-i2s: remove I2S pin setup This removes the calls to pxa_gpio_mode from the pxa2xx-i2s driver. Pin setup should be done during board init via pxa2xx_mfp_config instead. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Mark Brown --- sound/soc/pxa/pxa2xx-i2s.c | 36 ------------------------------------ 1 file changed, 36 deletions(-) diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 517991fb1099..83b59d7fe96e 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -25,20 +25,11 @@ #include #include -#include #include #include "pxa2xx-pcm.h" #include "pxa2xx-i2s.h" -struct pxa2xx_gpio { - u32 sys; - u32 rx; - u32 tx; - u32 clk; - u32 frm; -}; - /* * I2S Controller Register and Bit Definitions */ @@ -106,21 +97,6 @@ static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_in = { DCMD_BURST32 | DCMD_WIDTH4, }; -static struct pxa2xx_gpio gpio_bus[] = { - { /* I2S SoC Slave */ - .rx = GPIO29_SDATA_IN_I2S_MD, - .tx = GPIO30_SDATA_OUT_I2S_MD, - .clk = GPIO28_BITCLK_IN_I2S_MD, - .frm = GPIO31_SYNC_I2S_MD, - }, - { /* I2S SoC Master */ - .rx = GPIO29_SDATA_IN_I2S_MD, - .tx = GPIO30_SDATA_OUT_I2S_MD, - .clk = GPIO28_BITCLK_OUT_I2S_MD, - .frm = GPIO31_SYNC_I2S_MD, - }, -}; - static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -181,9 +157,6 @@ static int pxa2xx_i2s_set_dai_sysclk(struct snd_soc_dai *cpu_dai, if (clk_id != PXA2XX_I2S_SYSCLK) return -ENODEV; - if (pxa_i2s.master && dir == SND_SOC_CLOCK_OUT) - pxa_gpio_mode(gpio_bus[pxa_i2s.master].sys); - return 0; } @@ -194,10 +167,6 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - pxa_gpio_mode(gpio_bus[pxa_i2s.master].rx); - pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx); - pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm); - pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk); BUG_ON(IS_ERR(clk_i2s)); clk_enable(clk_i2s); pxa_i2s_wait(); @@ -398,11 +367,6 @@ static struct platform_driver pxa2xx_i2s_driver = { static int __init pxa2xx_i2s_init(void) { - if (cpu_is_pxa27x()) - gpio_bus[1].sys = GPIO113_I2S_SYSCLK_MD; - else - gpio_bus[1].sys = GPIO32_SYSCLK_I2S_MD; - clk_i2s = ERR_PTR(-ENOENT); return platform_driver_register(&pxa2xx_i2s_driver); } -- cgit v1.2.3 From 8663ae55f39e99c25242adb6242a191258a4eca1 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Sun, 8 Feb 2009 19:50:34 -0200 Subject: ALSA: hda - Bind new ecs mobo id (1019:2950) to model=ecs202 This adds a new sound quirk entry (model=ecs202) for an ecs motherboard with IDT STAC9221 codec (1019:2950). Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 85dc642d1130..d16d5c60eecd 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2108,6 +2108,8 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = { "ECS/PC chips", STAC_ECS_202), SND_PCI_QUIRK(0x1019, 0x2820, "ECS/PC chips", STAC_ECS_202), + SND_PCI_QUIRK(0x1019, 0x2950, + "ECS/PC chips", STAC_ECS_202), {} /* terminator */ }; -- cgit v1.2.3 From 23c7b521c250b261dd97a7a06d5a2e74b56233d5 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Sun, 8 Feb 2009 19:51:28 -0200 Subject: ALSA: hda - Don't touch non-existent port f on 4-port 92hd71bxx codecs When checking for input amps on pins 0x0a, 0x0d and 0x0f, and initializing them for 92hd71xxx codec models, we must skip nid 0x0f for 4-port models too like with 5-port models, as it is unused (nid 0x0f is vendor reserved in 4-port models). Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d16d5c60eecd..2f4e090b0557 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5072,6 +5072,8 @@ again: switch (codec->vendor_id) { case 0x111d76b6: /* 4 Port without Analog Mixer */ case 0x111d76b7: + unmute_init++; + /* fallthru */ case 0x111d76b4: /* 6 Port without Analog Mixer */ case 0x111d76b5: memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_nomixer, -- cgit v1.2.3 From 8bd4bb7a35e8ebb015a531218614c48e10a3c4ee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 Jan 2009 17:27:45 +0100 Subject: ALSA: Add subdevice_mask field to quirk entries Introduced a new field, subdevice_mask, which specifies the bitmask to match with the given subdevice ID. Signed-off-by: Takashi Iwai --- include/sound/core.h | 16 ++++++++++++++-- sound/core/misc.c | 10 ++++++---- 2 files changed, 20 insertions(+), 6 deletions(-) diff --git a/include/sound/core.h b/include/sound/core.h index f632484bc743..f67952a61a2d 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -446,21 +446,33 @@ static inline int __snd_bug_on(int cond) struct snd_pci_quirk { unsigned short subvendor; /* PCI subvendor ID */ unsigned short subdevice; /* PCI subdevice ID */ + unsigned short subdevice_mask; /* bitmask to match */ int value; /* value */ #ifdef CONFIG_SND_DEBUG_VERBOSE const char *name; /* name of the device (optional) */ #endif }; -#define _SND_PCI_QUIRK_ID(vend,dev) \ - .subvendor = (vend), .subdevice = (dev) +#define _SND_PCI_QUIRK_ID_MASK(vend, mask, dev) \ + .subvendor = (vend), .subdevice = (dev), .subdevice_mask = (mask) +#define _SND_PCI_QUIRK_ID(vend, dev) \ + _SND_PCI_QUIRK_ID_MASK(vend, 0xffff, dev) #define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)} #ifdef CONFIG_SND_DEBUG_VERBOSE #define SND_PCI_QUIRK(vend,dev,xname,val) \ {_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)} +#define SND_PCI_QUIRK_VENDOR(vend, xname, val) \ + {_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val), .name = (xname)} +#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val) \ + {_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), \ + .value = (val), .name = (xname)} #else #define SND_PCI_QUIRK(vend,dev,xname,val) \ {_SND_PCI_QUIRK_ID(vend, dev), .value = (val)} +#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val) \ + {_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), .value = (val)} +#define SND_PCI_QUIRK_VENDOR(vend, xname, val) \ + {_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val)} #endif const struct snd_pci_quirk * diff --git a/sound/core/misc.c b/sound/core/misc.c index 38524f615d94..a9710e0c97af 100644 --- a/sound/core/misc.c +++ b/sound/core/misc.c @@ -95,12 +95,14 @@ snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list) { const struct snd_pci_quirk *q; - for (q = list; q->subvendor; q++) - if (q->subvendor == pci->subsystem_vendor && - (!q->subdevice || q->subdevice == pci->subsystem_device)) + for (q = list; q->subvendor; q++) { + if (q->subvendor != pci->subsystem_vendor) + continue; + if (!q->subdevice || + (pci->subsystem_device & q->subdevice_mask) == q->subdevice) return q; + } return NULL; } - EXPORT_SYMBOL(snd_pci_quirk_lookup); #endif -- cgit v1.2.3 From dea0a5095b5e21306a81c496567043798fac7815 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Feb 2009 17:14:52 +0100 Subject: ALSA: hda - Clean up quirk lists Clean up quirk lists with bit masks. Also, sorted in numerical order for alc662_cfg_tbl[]. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 10 ++--- sound/pci/hda/patch_conexant.c | 20 +++------ sound/pci/hda/patch_realtek.c | 97 ++++++++++++++++++++---------------------- sound/pci/hda/patch_sigmatel.c | 61 ++++---------------------- 4 files changed, 65 insertions(+), 123 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index cc02f2df2510..6106dfe8ec04 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1015,10 +1015,8 @@ static struct snd_pci_quirk ad1986a_cfg_tbl[] = { SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD), SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK), SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP), - SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_SAMSUNG), - SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_SAMSUNG), - SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_SAMSUNG), SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA), + SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG), SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK), SND_PCI_QUIRK(0x17aa, 0x1011, "Lenovo M55", AD1986A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x1017, "Lenovo A60", AD1986A_3STACK), @@ -1706,10 +1704,10 @@ static struct snd_pci_quirk ad1981_cfg_tbl[] = { SND_PCI_QUIRK(0x1014, 0x0597, "Lenovo Z60", AD1981_THINKPAD), SND_PCI_QUIRK(0x1014, 0x05b7, "Lenovo Z60m", AD1981_THINKPAD), /* All HP models */ - SND_PCI_QUIRK(0x103c, 0, "HP nx", AD1981_HP), + SND_PCI_QUIRK_VENDOR(0x103c, "HP nx", AD1981_HP), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba U205", AD1981_TOSHIBA), /* Lenovo Thinkpad T60/X60/Z6xx */ - SND_PCI_QUIRK(0x17aa, 0, "Lenovo Thinkpad", AD1981_THINKPAD), + SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo Thinkpad", AD1981_THINKPAD), /* HP nx6320 (reversed SSID, H/W bug) */ SND_PCI_QUIRK(0x30b0, 0x103c, "HP nx6320", AD1981_HP), {} @@ -3481,7 +3479,7 @@ static const char *ad1984_models[AD1984_MODELS] = { static struct snd_pci_quirk ad1984_cfg_tbl[] = { /* Lenovo Thinkpad T61/X61 */ - SND_PCI_QUIRK(0x17aa, 0, "Lenovo Thinkpad", AD1984_THINKPAD), + SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo Thinkpad", AD1984_THINKPAD), SND_PCI_QUIRK(0x1028, 0x0214, "Dell T3400", AD1984_DELL_DESKTOP), {} }; diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 0177ef8f4c9e..fdf876be712d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1002,15 +1002,9 @@ static const char *cxt5045_models[CXT5045_MODELS] = { }; static struct snd_pci_quirk cxt5045_cfg_tbl[] = { - SND_PCI_QUIRK(0x103c, 0x30a5, "HP", CXT5045_LAPTOP_HPSENSE), - SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV Series", CXT5045_LAPTOP_HPSENSE), - SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2120", CXT5045_LAPTOP_HPSENSE), - SND_PCI_QUIRK(0x103c, 0x30b7, "HP DV6000Z", CXT5045_LAPTOP_HPSENSE), - SND_PCI_QUIRK(0x103c, 0x30bb, "HP DV8000", CXT5045_LAPTOP_HPSENSE), - SND_PCI_QUIRK(0x103c, 0x30cd, "HP DV Series", CXT5045_LAPTOP_HPSENSE), - SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV9533EG", CXT5045_LAPTOP_HPSENSE), SND_PCI_QUIRK(0x103c, 0x30d5, "HP 530", CXT5045_LAPTOP_HP530), - SND_PCI_QUIRK(0x103c, 0x30d9, "HP Spartan", CXT5045_LAPTOP_HPSENSE), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP DV Series", + CXT5045_LAPTOP_HPSENSE), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P105", CXT5045_LAPTOP_MICSENSE), SND_PCI_QUIRK(0x152d, 0x0753, "Benq R55E", CXT5045_BENQ), SND_PCI_QUIRK(0x1734, 0x10ad, "Fujitsu Si1520", CXT5045_LAPTOP_MICSENSE), @@ -1020,8 +1014,8 @@ static struct snd_pci_quirk cxt5045_cfg_tbl[] = { SND_PCI_QUIRK(0x1509, 0x1e40, "FIC", CXT5045_LAPTOP_HPMICSENSE), SND_PCI_QUIRK(0x1509, 0x2f05, "FIC", CXT5045_LAPTOP_HPMICSENSE), SND_PCI_QUIRK(0x1509, 0x2f06, "FIC", CXT5045_LAPTOP_HPMICSENSE), - SND_PCI_QUIRK(0x1631, 0xc106, "Packard Bell", CXT5045_LAPTOP_HPMICSENSE), - SND_PCI_QUIRK(0x1631, 0xc107, "Packard Bell", CXT5045_LAPTOP_HPMICSENSE), + SND_PCI_QUIRK_MASK(0x1631, 0xff00, 0xc100, "Packard Bell", + CXT5045_LAPTOP_HPMICSENSE), SND_PCI_QUIRK(0x8086, 0x2111, "Conexant Reference board", CXT5045_LAPTOP_HPSENSE), {} }; @@ -1571,11 +1565,9 @@ static const char *cxt5047_models[CXT5047_MODELS] = { }; static struct snd_pci_quirk cxt5047_cfg_tbl[] = { - SND_PCI_QUIRK(0x103c, 0x30a0, "HP DV1000", CXT5047_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30a5, "HP DV5200T/DV8000T", CXT5047_LAPTOP_HP), - SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV2000T/DV3000T", CXT5047_LAPTOP), - SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2000Z", CXT5047_LAPTOP), - SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6700", CXT5047_LAPTOP), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP DV Series", + CXT5047_LAPTOP), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD), {} }; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f594a0960290..7ae8fad0189f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3598,7 +3598,7 @@ static struct snd_pci_quirk alc880_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG), SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST), SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST), - SND_PCI_QUIRK(0x1043, 0, "ASUS", ALC880_ASUS), /* default ASUS */ + SND_PCI_QUIRK_VENDOR(0x1043, "ASUS", ALC880_ASUS), /* default ASUS */ SND_PCI_QUIRK(0x104d, 0x81a0, "Sony", ALC880_3ST), SND_PCI_QUIRK(0x104d, 0x81d6, "Sony", ALC880_3ST), SND_PCI_QUIRK(0x107b, 0x3032, "Gateway", ALC880_5ST), @@ -3641,7 +3641,8 @@ static struct snd_pci_quirk alc880_cfg_tbl[] = { SND_PCI_QUIRK(0x8086, 0xe400, "Intel mobo", ALC880_5ST_DIG), SND_PCI_QUIRK(0x8086, 0xe401, "Intel mobo", ALC880_5ST_DIG), SND_PCI_QUIRK(0x8086, 0xe402, "Intel mobo", ALC880_5ST_DIG), - SND_PCI_QUIRK(0x8086, 0, "Intel mobo", ALC880_3ST), /* default Intel */ + /* default Intel */ + SND_PCI_QUIRK_VENDOR(0x8086, "Intel mobo", ALC880_3ST), SND_PCI_QUIRK(0xa0a0, 0x0560, "AOpen i915GMm-HFS", ALC880_5ST_DIG), SND_PCI_QUIRK(0xe803, 0x1019, NULL, ALC880_6ST_DIG), {} @@ -8521,7 +8522,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_4930G), - SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */ + /* default Acer */ + SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG), SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP), @@ -8566,7 +8568,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720), SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720), - SND_PCI_QUIRK(0x1558, 0, "Clevo laptop", ALC883_LAPTOP_EAPD), + SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550", @@ -10707,14 +10709,10 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x1002, 0x437b, "Hippo", ALC262_HIPPO), SND_PCI_QUIRK(0x1033, 0x8895, "NEC Versa S9100", ALC262_NEC), - SND_PCI_QUIRK(0x103c, 0x12fe, "HP xw9400", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x12ff, "HP xw4550", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x1306, "HP xw8600", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x1307, "HP xw6600", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x1308, "HP xw4600", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1200, "HP xw series", + ALC262_HP_BPC), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1300, "HP xw series", + ALC262_HP_BPC), SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL), SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF), SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL), @@ -10742,8 +10740,8 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU), SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU), SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_TYAN), - SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA), - SND_PCI_QUIRK(0x144d, 0xc039, "Samsung Q1U EL", ALC262_ULTRA), + SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc032, "Samsung Q1", + ALC262_ULTRA), SND_PCI_QUIRK(0x144d, 0xc510, "Samsung Q45", ALC262_HIPPO), SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000 y410", ALC262_LENOVO_3000), SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8), @@ -14534,9 +14532,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = { SND_PCI_QUIRK(0x1179, 0xff03, "Toshiba P205", ALC861VD_LENOVO), SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_DALLAS), SND_PCI_QUIRK(0x1565, 0x820d, "Biostar NF61S SE", ALC861VD_6ST_DIG), - SND_PCI_QUIRK(0x17aa, 0x2066, "Lenovo", ALC861VD_LENOVO), - SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo 3000 C200", ALC861VD_LENOVO), - SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000 N200", ALC861VD_LENOVO), + SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", ALC861VD_LENOVO), SND_PCI_QUIRK(0x1849, 0x0862, "ASRock K8NF6G-VSTA", ALC861VD_6ST_DIG), {} }; @@ -16150,56 +16146,55 @@ static const char *alc662_models[ALC662_MODEL_LAST] = { }; static struct snd_pci_quirk alc662_cfg_tbl[] = { - SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA), - SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V), - SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG), - SND_PCI_QUIRK(0x1043, 0x82a1, "ASUS Eeepc", ALC662_ASUS_EEEPC_P701), - SND_PCI_QUIRK(0x1043, 0x82d1, "ASUS Eeepc EP20", ALC662_ASUS_EEEPC_EP20), - SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS), SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1), - SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6), + SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6), + SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5), + SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6), + SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_ASUS_MODE2), - SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA), + /*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/ SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3), - SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3), - SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3), - SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V), + /*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/ + SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4), - SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5), - SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6), - SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6), - SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6), + SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG), + SND_PCI_QUIRK(0x1043, 0x82a1, "ASUS Eeepc", ALC662_ASUS_EEEPC_P701), + SND_PCI_QUIRK(0x1043, 0x82d1, "ASUS Eeepc EP20", ALC662_ASUS_EEEPC_EP20), + SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS), SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K", ALC662_3ST_6ch_DIG), - SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E), - SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS), - SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS), SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L", ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG), + SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E), SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0", ALC662_3ST_6ch_DIG), - SND_PCI_QUIRK(0x1854, 0x2000, "ASUS H13-2000", ALC663_ASUS_H13), - SND_PCI_QUIRK(0x1854, 0x2001, "ASUS H13-2001", ALC663_ASUS_H13), - SND_PCI_QUIRK(0x1854, 0x2002, "ASUS H13-2002", ALC663_ASUS_H13), + SND_PCI_QUIRK_MASK(0x1854, 0xf000, 0x2000, "ASUS H13-200x", + ALC663_ASUS_H13), {} }; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2f4e090b0557..12b30884843b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2082,33 +2082,7 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01d7, "Dell XPS M1210", STAC_922X_DELL_M82), /* ECS/PC Chips boards */ - SND_PCI_QUIRK(0x1019, 0x2144, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2608, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2633, - "ECS/PC chips P17G/1333", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2811, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2812, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2813, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2814, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2815, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2816, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2817, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2818, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2819, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2820, - "ECS/PC chips", STAC_ECS_202), - SND_PCI_QUIRK(0x1019, 0x2950, + SND_PCI_QUIRK_MASK(0x1019, 0xf000, 0x2000, "ECS/PC chips", STAC_ECS_202), {} /* terminator */ }; @@ -2169,22 +2143,10 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x3d01, "Intel D946", STAC_D965_3ST), SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xa301, "Intel D946", STAC_D965_3ST), /* 965 based 3 stack systems */ - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2116, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2115, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2114, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2113, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2112, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2111, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2110, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2009, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2008, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2007, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2006, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2005, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2004, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2003, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2002, "Intel D965", STAC_D965_3ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2001, "Intel D965", STAC_D965_3ST), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2100, + "Intel D965", STAC_D965_3ST), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2000, + "Intel D965", STAC_D965_3ST), /* Dell 3 stack systems */ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f7, "Dell XPS M1730", STAC_DELL_3ST), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01dd, "Dell Dimension E520", STAC_DELL_3ST), @@ -2200,15 +2162,10 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0209, "Dell XPS 1330", STAC_DELL_BIOS), /* 965 based 5 stack systems */ - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2301, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2302, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2303, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2304, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2305, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2501, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2502, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2503, "Intel D965", STAC_D965_5ST), - SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2504, "Intel D965", STAC_D965_5ST), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2300, + "Intel D965", STAC_D965_5ST), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500, + "Intel D965", STAC_D965_5ST), {} /* terminator */ }; -- cgit v1.2.3 From a85165c66c5640c37b67a94aa4e00fe45273bca1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Feb 2009 17:15:50 +0100 Subject: ALSA: via82xx - Clean up quirk list Use SND_PCI_QUIRK_VENDOR() macro. Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index fc62d6380f86..a027896a220f 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -2363,14 +2363,14 @@ static struct snd_pci_quirk dxs_whitelist[] __devinitdata = { SND_PCI_QUIRK(0x1019, 0x0996, "ESC Mobo", VIA_DXS_48K), SND_PCI_QUIRK(0x1019, 0x0a81, "ECS K7VTA3 v8.0", VIA_DXS_NO_VRA), SND_PCI_QUIRK(0x1019, 0x0a85, "ECS L7VMM2", VIA_DXS_NO_VRA), - SND_PCI_QUIRK(0x1019, 0, "ESC K8", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x1019, "ESC K8", VIA_DXS_SRC), SND_PCI_QUIRK(0x1019, 0xaa01, "ESC K8T890-A", VIA_DXS_SRC), SND_PCI_QUIRK(0x1025, 0x0033, "Acer Inspire 1353LM", VIA_DXS_NO_VRA), SND_PCI_QUIRK(0x1025, 0x0046, "Acer Aspire 1524 WLMi", VIA_DXS_SRC), - SND_PCI_QUIRK(0x1043, 0, "ASUS A7/A8", VIA_DXS_NO_VRA), - SND_PCI_QUIRK(0x1071, 0, "Diverse Notebook", VIA_DXS_NO_VRA), + SND_PCI_QUIRK_VENDOR(0x1043, "ASUS A7/A8", VIA_DXS_NO_VRA), + SND_PCI_QUIRK_VENDOR(0x1071, "Diverse Notebook", VIA_DXS_NO_VRA), SND_PCI_QUIRK(0x10cf, 0x118e, "FSC Laptop", VIA_DXS_ENABLE), - SND_PCI_QUIRK(0x1106, 0, "ASRock", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x1106, "ASRock", VIA_DXS_SRC), SND_PCI_QUIRK(0x1297, 0xa231, "Shuttle AK31v2", VIA_DXS_SRC), SND_PCI_QUIRK(0x1297, 0xa232, "Shuttle", VIA_DXS_SRC), SND_PCI_QUIRK(0x1297, 0xc160, "Shuttle Sk41G", VIA_DXS_SRC), @@ -2378,7 +2378,7 @@ static struct snd_pci_quirk dxs_whitelist[] __devinitdata = { SND_PCI_QUIRK(0x1462, 0x3800, "MSI KT266", VIA_DXS_ENABLE), SND_PCI_QUIRK(0x1462, 0x7120, "MSI KT4V", VIA_DXS_ENABLE), SND_PCI_QUIRK(0x1462, 0x7142, "MSI K8MM-V", VIA_DXS_ENABLE), - SND_PCI_QUIRK(0x1462, 0, "MSI Mobo", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x1462, "MSI Mobo", VIA_DXS_SRC), SND_PCI_QUIRK(0x147b, 0x1401, "ABIT KD7(-RAID)", VIA_DXS_ENABLE), SND_PCI_QUIRK(0x147b, 0x1411, "ABIT VA-20", VIA_DXS_ENABLE), SND_PCI_QUIRK(0x147b, 0x1413, "ABIT KV8 Pro", VIA_DXS_ENABLE), @@ -2392,11 +2392,11 @@ static struct snd_pci_quirk dxs_whitelist[] __devinitdata = { SND_PCI_QUIRK(0x161f, 0x2032, "m680x machines", VIA_DXS_48K), SND_PCI_QUIRK(0x1631, 0xe004, "PB EasyNote 3174", VIA_DXS_ENABLE), SND_PCI_QUIRK(0x1695, 0x3005, "EPoX EP-8K9A", VIA_DXS_ENABLE), - SND_PCI_QUIRK(0x1695, 0, "EPoX mobo", VIA_DXS_SRC), - SND_PCI_QUIRK(0x16f3, 0, "Jetway K8", VIA_DXS_SRC), - SND_PCI_QUIRK(0x1734, 0, "FSC Laptop", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x1695, "EPoX mobo", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x16f3, "Jetway K8", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x1734, "FSC Laptop", VIA_DXS_SRC), SND_PCI_QUIRK(0x1849, 0x3059, "ASRock K7VM2", VIA_DXS_NO_VRA), - SND_PCI_QUIRK(0x1849, 0, "ASRock mobo", VIA_DXS_SRC), + SND_PCI_QUIRK_VENDOR(0x1849, "ASRock mobo", VIA_DXS_SRC), SND_PCI_QUIRK(0x1919, 0x200a, "Soltek SL-K8", VIA_DXS_NO_VRA), SND_PCI_QUIRK(0x4005, 0x4710, "MSI K7T266", VIA_DXS_SRC), { } /* terminator */ -- cgit v1.2.3 From b93f74f604c53b546fced33d11aee722560de249 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 9 Feb 2009 14:27:06 +0200 Subject: ASoC: TLV320AIC3X: Fix volume ranges This is a minor fix but helps to define dB ranges for volume controls. Only DAC digital volume has full register value range from 0 to 127 but ADC PGA gain and output stage volume controls don't. For ADC PGA, maximum value is 119 and then it saturates to the same gain value of 59.5 dB. For output stages, value 117 corresponds to -78.3 dB and is muted for values 118 and above. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic3x.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index ac73e692a99b..cdb6dec14e1c 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -255,51 +255,51 @@ static const struct snd_kcontrol_new aic3x_snd_controls[] = { SOC_DOUBLE_R("PCM Playback Volume", LDAC_VOL, RDAC_VOL, 0, 0x7f, 1), SOC_DOUBLE_R("Line DAC Playback Volume", DACL1_2_LLOPM_VOL, - DACR1_2_RLOPM_VOL, 0, 0x7f, 1), + DACR1_2_RLOPM_VOL, 0, 118, 1), SOC_SINGLE("LineL Playback Switch", LLOPM_CTRL, 3, 0x01, 0), SOC_SINGLE("LineR Playback Switch", RLOPM_CTRL, 3, 0x01, 0), SOC_DOUBLE_R("LineL DAC Playback Volume", DACL1_2_LLOPM_VOL, - DACR1_2_LLOPM_VOL, 0, 0x7f, 1), + DACR1_2_LLOPM_VOL, 0, 118, 1), SOC_SINGLE("LineL Left PGA Bypass Playback Volume", PGAL_2_LLOPM_VOL, - 0, 0x7f, 1), + 0, 118, 1), SOC_SINGLE("LineR Right PGA Bypass Playback Volume", PGAR_2_RLOPM_VOL, - 0, 0x7f, 1), + 0, 118, 1), SOC_DOUBLE_R("LineL Line2 Bypass Playback Volume", LINE2L_2_LLOPM_VOL, - LINE2R_2_LLOPM_VOL, 0, 0x7f, 1), + LINE2R_2_LLOPM_VOL, 0, 118, 1), SOC_DOUBLE_R("LineR Line2 Bypass Playback Volume", LINE2L_2_RLOPM_VOL, - LINE2R_2_RLOPM_VOL, 0, 0x7f, 1), + LINE2R_2_RLOPM_VOL, 0, 118, 1), SOC_DOUBLE_R("Mono DAC Playback Volume", DACL1_2_MONOLOPM_VOL, - DACR1_2_MONOLOPM_VOL, 0, 0x7f, 1), + DACR1_2_MONOLOPM_VOL, 0, 118, 1), SOC_SINGLE("Mono DAC Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0), SOC_DOUBLE_R("Mono PGA Bypass Playback Volume", PGAL_2_MONOLOPM_VOL, - PGAR_2_MONOLOPM_VOL, 0, 0x7f, 1), + PGAR_2_MONOLOPM_VOL, 0, 118, 1), SOC_DOUBLE_R("Mono Line2 Bypass Playback Volume", LINE2L_2_MONOLOPM_VOL, - LINE2R_2_MONOLOPM_VOL, 0, 0x7f, 1), + LINE2R_2_MONOLOPM_VOL, 0, 118, 1), SOC_DOUBLE_R("HP DAC Playback Volume", DACL1_2_HPLOUT_VOL, - DACR1_2_HPROUT_VOL, 0, 0x7f, 1), + DACR1_2_HPROUT_VOL, 0, 118, 1), SOC_DOUBLE_R("HP DAC Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3, 0x01, 0), SOC_DOUBLE_R("HP Right PGA Bypass Playback Volume", PGAR_2_HPLOUT_VOL, - PGAR_2_HPROUT_VOL, 0, 0x7f, 1), + PGAR_2_HPROUT_VOL, 0, 118, 1), SOC_SINGLE("HPL PGA Bypass Playback Volume", PGAL_2_HPLOUT_VOL, - 0, 0x7f, 1), + 0, 118, 1), SOC_SINGLE("HPR PGA Bypass Playback Volume", PGAL_2_HPROUT_VOL, - 0, 0x7f, 1), + 0, 118, 1), SOC_DOUBLE_R("HP Line2 Bypass Playback Volume", LINE2L_2_HPLOUT_VOL, - LINE2R_2_HPROUT_VOL, 0, 0x7f, 1), + LINE2R_2_HPROUT_VOL, 0, 118, 1), SOC_DOUBLE_R("HPCOM DAC Playback Volume", DACL1_2_HPLCOM_VOL, - DACR1_2_HPRCOM_VOL, 0, 0x7f, 1), + DACR1_2_HPRCOM_VOL, 0, 118, 1), SOC_DOUBLE_R("HPCOM DAC Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3, 0x01, 0), SOC_SINGLE("HPLCOM PGA Bypass Playback Volume", PGAL_2_HPLCOM_VOL, - 0, 0x7f, 1), + 0, 118, 1), SOC_SINGLE("HPRCOM PGA Bypass Playback Volume", PGAL_2_HPRCOM_VOL, - 0, 0x7f, 1), + 0, 118, 1), SOC_DOUBLE_R("HPCOM Line2 Bypass Playback Volume", LINE2L_2_HPLCOM_VOL, - LINE2R_2_HPRCOM_VOL, 0, 0x7f, 1), + LINE2R_2_HPRCOM_VOL, 0, 118, 1), /* * Note: enable Automatic input Gain Controller with care. It can @@ -308,7 +308,7 @@ static const struct snd_kcontrol_new aic3x_snd_controls[] = { SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0), /* Input */ - SOC_DOUBLE_R("PGA Capture Volume", LADC_VOL, RADC_VOL, 0, 0x7f, 0), + SOC_DOUBLE_R("PGA Capture Volume", LADC_VOL, RADC_VOL, 0, 119, 0), SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1), SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]), -- cgit v1.2.3 From 7565fc38cc8c3a2742d63e957199d70a82d2faf1 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 9 Feb 2009 14:27:07 +0200 Subject: ASoC: TLV320AIC3X: Add TLV information for volume controls TLV320AIC3X volume controls are logarithmic. Export their dB ranges. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic3x.c | 114 ++++++++++++++++++++++++++--------------- 1 file changed, 73 insertions(+), 41 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index cdb6dec14e1c..d638e3f0728b 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -45,6 +45,7 @@ #include #include #include +#include #include "tlv320aic3x.h" @@ -250,56 +251,86 @@ static const struct soc_enum aic3x_enum[] = { SOC_ENUM_DOUBLE(AIC3X_CODEC_DFILT_CTRL, 6, 4, 4, aic3x_adc_hpf), }; +/* + * DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps + */ +static DECLARE_TLV_DB_SCALE(dac_tlv, -6350, 50, 0); +/* ADC PGA gain volumes. From 0 to 59.5 dB in 0.5 dB steps */ +static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 50, 0); +/* + * Output stage volumes. From -78.3 to 0 dB. Muted below -78.3 dB. + * Step size is approximately 0.5 dB over most of the scale but increasing + * near the very low levels. + * Define dB scale so that it is mostly correct for range about -55 to 0 dB + * but having increasing dB difference below that (and where it doesn't count + * so much). This setting shows -50 dB (actual is -50.3 dB) for register + * value 100 and -58.5 dB (actual is -78.3 dB) for register value 117. + */ +static DECLARE_TLV_DB_SCALE(output_stage_tlv, -5900, 50, 1); + static const struct snd_kcontrol_new aic3x_snd_controls[] = { /* Output */ - SOC_DOUBLE_R("PCM Playback Volume", LDAC_VOL, RDAC_VOL, 0, 0x7f, 1), + SOC_DOUBLE_R_TLV("PCM Playback Volume", + LDAC_VOL, RDAC_VOL, 0, 0x7f, 1, dac_tlv), - SOC_DOUBLE_R("Line DAC Playback Volume", DACL1_2_LLOPM_VOL, - DACR1_2_RLOPM_VOL, 0, 118, 1), + SOC_DOUBLE_R_TLV("Line DAC Playback Volume", + DACL1_2_LLOPM_VOL, DACR1_2_RLOPM_VOL, + 0, 118, 1, output_stage_tlv), SOC_SINGLE("LineL Playback Switch", LLOPM_CTRL, 3, 0x01, 0), SOC_SINGLE("LineR Playback Switch", RLOPM_CTRL, 3, 0x01, 0), - SOC_DOUBLE_R("LineL DAC Playback Volume", DACL1_2_LLOPM_VOL, - DACR1_2_LLOPM_VOL, 0, 118, 1), - SOC_SINGLE("LineL Left PGA Bypass Playback Volume", PGAL_2_LLOPM_VOL, - 0, 118, 1), - SOC_SINGLE("LineR Right PGA Bypass Playback Volume", PGAR_2_RLOPM_VOL, - 0, 118, 1), - SOC_DOUBLE_R("LineL Line2 Bypass Playback Volume", LINE2L_2_LLOPM_VOL, - LINE2R_2_LLOPM_VOL, 0, 118, 1), - SOC_DOUBLE_R("LineR Line2 Bypass Playback Volume", LINE2L_2_RLOPM_VOL, - LINE2R_2_RLOPM_VOL, 0, 118, 1), - - SOC_DOUBLE_R("Mono DAC Playback Volume", DACL1_2_MONOLOPM_VOL, - DACR1_2_MONOLOPM_VOL, 0, 118, 1), + SOC_DOUBLE_R_TLV("LineL DAC Playback Volume", + DACL1_2_LLOPM_VOL, DACR1_2_LLOPM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("LineL Left PGA Bypass Playback Volume", + PGAL_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("LineR Right PGA Bypass Playback Volume", + PGAR_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("LineL Line2 Bypass Playback Volume", + LINE2L_2_LLOPM_VOL, LINE2R_2_LLOPM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("LineR Line2 Bypass Playback Volume", + LINE2L_2_RLOPM_VOL, LINE2R_2_RLOPM_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("Mono DAC Playback Volume", + DACL1_2_MONOLOPM_VOL, DACR1_2_MONOLOPM_VOL, + 0, 118, 1, output_stage_tlv), SOC_SINGLE("Mono DAC Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0), - SOC_DOUBLE_R("Mono PGA Bypass Playback Volume", PGAL_2_MONOLOPM_VOL, - PGAR_2_MONOLOPM_VOL, 0, 118, 1), - SOC_DOUBLE_R("Mono Line2 Bypass Playback Volume", LINE2L_2_MONOLOPM_VOL, - LINE2R_2_MONOLOPM_VOL, 0, 118, 1), - - SOC_DOUBLE_R("HP DAC Playback Volume", DACL1_2_HPLOUT_VOL, - DACR1_2_HPROUT_VOL, 0, 118, 1), + SOC_DOUBLE_R_TLV("Mono PGA Bypass Playback Volume", + PGAL_2_MONOLOPM_VOL, PGAR_2_MONOLOPM_VOL, + 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("Mono Line2 Bypass Playback Volume", + LINE2L_2_MONOLOPM_VOL, LINE2R_2_MONOLOPM_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("HP DAC Playback Volume", + DACL1_2_HPLOUT_VOL, DACR1_2_HPROUT_VOL, + 0, 118, 1, output_stage_tlv), SOC_DOUBLE_R("HP DAC Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3, 0x01, 0), - SOC_DOUBLE_R("HP Right PGA Bypass Playback Volume", PGAR_2_HPLOUT_VOL, - PGAR_2_HPROUT_VOL, 0, 118, 1), - SOC_SINGLE("HPL PGA Bypass Playback Volume", PGAL_2_HPLOUT_VOL, - 0, 118, 1), - SOC_SINGLE("HPR PGA Bypass Playback Volume", PGAL_2_HPROUT_VOL, - 0, 118, 1), - SOC_DOUBLE_R("HP Line2 Bypass Playback Volume", LINE2L_2_HPLOUT_VOL, - LINE2R_2_HPROUT_VOL, 0, 118, 1), - - SOC_DOUBLE_R("HPCOM DAC Playback Volume", DACL1_2_HPLCOM_VOL, - DACR1_2_HPRCOM_VOL, 0, 118, 1), + SOC_DOUBLE_R_TLV("HP Right PGA Bypass Playback Volume", + PGAR_2_HPLOUT_VOL, PGAR_2_HPROUT_VOL, + 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("HPL PGA Bypass Playback Volume", + PGAL_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("HPR PGA Bypass Playback Volume", + PGAL_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("HP Line2 Bypass Playback Volume", + LINE2L_2_HPLOUT_VOL, LINE2R_2_HPROUT_VOL, + 0, 118, 1, output_stage_tlv), + + SOC_DOUBLE_R_TLV("HPCOM DAC Playback Volume", + DACL1_2_HPLCOM_VOL, DACR1_2_HPRCOM_VOL, + 0, 118, 1, output_stage_tlv), SOC_DOUBLE_R("HPCOM DAC Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3, 0x01, 0), - SOC_SINGLE("HPLCOM PGA Bypass Playback Volume", PGAL_2_HPLCOM_VOL, - 0, 118, 1), - SOC_SINGLE("HPRCOM PGA Bypass Playback Volume", PGAL_2_HPRCOM_VOL, - 0, 118, 1), - SOC_DOUBLE_R("HPCOM Line2 Bypass Playback Volume", LINE2L_2_HPLCOM_VOL, - LINE2R_2_HPRCOM_VOL, 0, 118, 1), + SOC_SINGLE_TLV("HPLCOM PGA Bypass Playback Volume", + PGAL_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), + SOC_SINGLE_TLV("HPRCOM PGA Bypass Playback Volume", + PGAL_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), + SOC_DOUBLE_R_TLV("HPCOM Line2 Bypass Playback Volume", + LINE2L_2_HPLCOM_VOL, LINE2R_2_HPRCOM_VOL, + 0, 118, 1, output_stage_tlv), /* * Note: enable Automatic input Gain Controller with care. It can @@ -308,7 +339,8 @@ static const struct snd_kcontrol_new aic3x_snd_controls[] = { SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0), /* Input */ - SOC_DOUBLE_R("PGA Capture Volume", LADC_VOL, RADC_VOL, 0, 119, 0), + SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL, + 0, 119, 0, adc_tlv), SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1), SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]), -- cgit v1.2.3 From 22971e3a77f193579be525a12f3ab91dbf241517 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Feb 2009 11:56:44 +0100 Subject: ALSA: hda - add digital beep support for ALC268 Added the digital beep support for ALC268. It was missing in the last patches. However, ALC268 has a strange pin use for widget 0x1d, which could be used as another purpose. So, the patch adds a check of the beep control before creating the hook for input layer. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7ae8fad0189f..97eaf3b1d97f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11885,7 +11885,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { static struct alc_config_preset alc268_presets[] = { [ALC267_QUANTA_IL1] = { - .mixers = { alc267_quanta_il1_mixer }, + .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer }, .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs, alc267_quanta_il1_verbs }, .num_dacs = ARRAY_SIZE(alc268_dac_nids), @@ -11967,7 +11967,8 @@ static struct alc_config_preset alc268_presets[] = { }, [ALC268_ACER_ASPIRE_ONE] = { .mixers = { alc268_acer_aspire_one_mixer, - alc268_capture_alt_mixer }, + alc268_beep_mixer, + alc268_capture_alt_mixer }, .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs, alc268_acer_aspire_one_verbs }, .num_dacs = ARRAY_SIZE(alc268_dac_nids), @@ -12036,7 +12037,7 @@ static int patch_alc268(struct hda_codec *codec) { struct alc_spec *spec; int board_config; - int err; + int i, has_beep, err; spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -12091,13 +12092,28 @@ static int patch_alc268(struct hda_codec *codec) spec->stream_digital_playback = &alc268_pcm_digital_playback; - if (!query_amp_caps(codec, 0x1d, HDA_INPUT)) - /* override the amp caps for beep generator */ - snd_hda_override_amp_caps(codec, 0x1d, HDA_INPUT, + has_beep = 0; + for (i = 0; i < spec->num_mixers; i++) { + if (spec->mixers[i] == alc268_beep_mixer) { + has_beep = 1; + break; + } + } + + if (has_beep) { + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } + if (!query_amp_caps(codec, 0x1d, HDA_INPUT)) + /* override the amp caps for beep generator */ + snd_hda_override_amp_caps(codec, 0x1d, HDA_INPUT, (0x0c << AC_AMPCAP_OFFSET_SHIFT) | (0x0c << AC_AMPCAP_NUM_STEPS_SHIFT) | (0x07 << AC_AMPCAP_STEP_SIZE_SHIFT) | (0 << AC_AMPCAP_MUTE_SHIFT)); + } if (!spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ -- cgit v1.2.3 From ed850a52af971528b048812c4215cef298af0d3b Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Tue, 10 Feb 2009 23:01:19 -0500 Subject: integrity: shmem zero fix Based on comments from Mike Frysinger and Randy Dunlap: (http://lkml.org/lkml/2009/2/9/262) - moved ima.h include before CONFIG_SHMEM test to fix compiler error on Blackfin: mm/shmem.c: In function 'shmem_zero_setup': mm/shmem.c:2670: error: implicit declaration of function 'ima_shm_check' - added 'struct linux_binprm' in ima.h to fix compiler warning on Blackfin: In file included from mm/shmem.c:32: include/linux/ima.h:25: warning: 'struct linux_binprm' declared inside parameter list include/linux/ima.h:25: warning: its scope is only this definition or declaration, which is probably not what you want - moved fs.h include within _LINUX_IMA_H definition Signed-off-by: Mimi Zohar Signed-off-by: Mike Frysinger Signed-off-by: James Morris --- include/linux/ima.h | 5 +++-- mm/shmem.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/linux/ima.h b/include/linux/ima.h index 6db30a328d98..0e2aa45cb0ce 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -7,11 +7,12 @@ * the Free Software Foundation, version 2 of the License. */ -#include - #ifndef _LINUX_IMA_H #define _LINUX_IMA_H +#include +struct linux_binprm; + #ifdef CONFIG_IMA extern int ima_bprm_check(struct linux_binprm *bprm); extern int ima_inode_alloc(struct inode *inode); diff --git a/mm/shmem.c b/mm/shmem.c index 75199888a6bd..8135fac294ee 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -28,6 +28,7 @@ #include #include #include +#include static struct vfsmount *shm_mnt; @@ -59,7 +60,6 @@ static struct vfsmount *shm_mnt; #include #include #include -#include #include #include -- cgit v1.2.3 From 9e30d7718bb7402c7bdee631ad2aae2658c324f0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 11 Feb 2009 08:28:04 +0100 Subject: ASoC: Fix forgotten replacements of socdev->codec The snd_soc_codec was moved into socdev->card, but this change wasn't applied in some places. Fixed now. Signed-off-by: Takashi Iwai --- sound/soc/omap/n810.c | 2 +- sound/soc/pxa/corgi.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 2 +- sound/soc/pxa/spitz.c | 2 +- sound/soc/pxa/tosa.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 25593fee9121..9f037cd0191d 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -72,7 +72,7 @@ static int n810_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; + struct snd_soc_codec *codec = rtd->socdev->card->codec; snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2); diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 1ba25a559524..0d41be33d572 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -100,7 +100,7 @@ static void corgi_ext_control(struct snd_soc_codec *codec) static int corgi_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; + struct snd_soc_codec *codec = rtd->socdev->card->codec; /* check the jack status at stream startup */ corgi_ext_control(codec); diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 4a9cf3083af0..29958cd9daec 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -55,7 +55,7 @@ static void palm27x_ext_control(struct snd_soc_codec *codec) static int palm27x_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; + struct snd_soc_codec *codec = rtd->socdev->card->codec; /* check the jack status at stream startup */ palm27x_ext_control(codec); diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 6e9827189fff..3a62d4354ef6 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -77,7 +77,7 @@ static void poodle_ext_control(struct snd_soc_codec *codec) static int poodle_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; + struct snd_soc_codec *codec = rtd->socdev->card->codec; /* check the jack status at stream startup */ poodle_ext_control(codec); diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index a3b9e6bdf979..1aafd8c645a1 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -109,7 +109,7 @@ static void spitz_ext_control(struct snd_soc_codec *codec) static int spitz_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; + struct snd_soc_codec *codec = rtd->socdev->card->codec; /* check the jack status at stream startup */ spitz_ext_control(codec); diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index c77194f74c9b..09b5bada03b9 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -82,7 +82,7 @@ static void tosa_ext_control(struct snd_soc_codec *codec) static int tosa_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; + struct snd_soc_codec *codec = rtd->socdev->card->codec; /* check the jack status at stream startup */ tosa_ext_control(codec); -- cgit v1.2.3 From 32d2c7fa1344ddf51886eddf31e228d139501dc6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 11 Feb 2009 11:33:13 +0100 Subject: ALSA: hda - Fix a wrong pin check in snd_hda_parse_pin_def_config() Fixed a wrong pin check (a typo) for debug print of digital input pin. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 93412f335dc4..95f10aec7a06 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3551,7 +3551,7 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, cfg->input_pins[AUTO_PIN_FRONT_LINE], cfg->input_pins[AUTO_PIN_CD], cfg->input_pins[AUTO_PIN_AUX]); - if (cfg->dig_out_pin) + if (cfg->dig_in_pin) snd_printd(" dig-in=0x%x\n", cfg->dig_in_pin); return 0; -- cgit v1.2.3 From 1afa6e2e1d26d0b9d96785ee1823bf11c4c5f202 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 11 Feb 2009 13:53:26 +0100 Subject: sound: OSS: dmabuf: too many loops loop adev->dmap_out->nbufs times Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/dmabuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/dmabuf.c b/sound/oss/dmabuf.c index 1e90d769b62e..1bfcf7e88546 100644 --- a/sound/oss/dmabuf.c +++ b/sound/oss/dmabuf.c @@ -439,7 +439,7 @@ int DMAbuf_sync(int dev) DMAbuf_launch_output(dev, dmap); adev->dmap_out->flags |= DMA_SYNCING; adev->dmap_out->underrun_count = 0; - while (!signal_pending(current) && n++ <= adev->dmap_out->nbufs && + while (!signal_pending(current) && n++ < adev->dmap_out->nbufs && adev->dmap_out->qlen && adev->dmap_out->underrun_count == 0) { long t = dmabuf_timeout(dmap); spin_unlock_irqrestore(&dmap->lock,flags); -- cgit v1.2.3 From 523979adfa0b79d4e3aa053220c37a9233294206 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 11 Feb 2009 11:12:28 -0500 Subject: integrity: audit update Based on discussions on linux-audit, as per Steve Grubb's request http://lkml.org/lkml/2009/2/6/269, the following changes were made: - forced audit result to be either 0 or 1. - made template names const - Added new stand-alone message type: AUDIT_INTEGRITY_RULE Signed-off-by: Mimi Zohar Acked-by: Steve Grubb Signed-off-by: James Morris --- include/linux/audit.h | 4 +++- security/integrity/ima/ima.h | 2 +- security/integrity/ima/ima_api.c | 2 +- security/integrity/ima/ima_audit.c | 21 ++++++++++++--------- security/integrity/ima/ima_fs.c | 2 +- security/integrity/ima/ima_init.c | 2 +- security/integrity/ima/ima_policy.c | 17 +++++++++-------- 7 files changed, 28 insertions(+), 22 deletions(-) diff --git a/include/linux/audit.h b/include/linux/audit.h index 930939abfbc6..4fa2810b675e 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -36,7 +36,8 @@ * 1500 - 1599 kernel LSPP events * 1600 - 1699 kernel crypto events * 1700 - 1799 kernel anomaly records - * 1800 - 1999 future kernel use (maybe integrity labels and related events) + * 1800 - 1899 kernel integrity events + * 1900 - 1999 future kernel use * 2000 is for otherwise unclassified kernel audit messages (legacy) * 2001 - 2099 unused (kernel) * 2100 - 2199 user space anomaly records @@ -130,6 +131,7 @@ #define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ #define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */ #define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */ +#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */ #define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index e3c16a21a38e..165eb5397ea5 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -47,7 +47,7 @@ struct ima_template_data { struct ima_template_entry { u8 digest[IMA_DIGEST_SIZE]; /* sha1 or md5 measurement hash */ - char *template_name; + const char *template_name; int template_len; struct ima_template_data template; }; diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c index a148a25804f6..3cd58b60afd2 100644 --- a/security/integrity/ima/ima_api.c +++ b/security/integrity/ima/ima_api.c @@ -15,7 +15,7 @@ #include #include "ima.h" -static char *IMA_TEMPLATE_NAME = "ima"; +static const char *IMA_TEMPLATE_NAME = "ima"; /* * ima_store_template - store ima template measurements diff --git a/security/integrity/ima/ima_audit.c b/security/integrity/ima/ima_audit.c index 8a0f1e23ccf1..1e082bb987be 100644 --- a/security/integrity/ima/ima_audit.c +++ b/security/integrity/ima/ima_audit.c @@ -22,16 +22,18 @@ static int ima_audit; static int __init ima_audit_setup(char *str) { unsigned long audit; - int rc; - char *op; + int rc, result = 0; + char *op = "ima_audit"; + char *cause; rc = strict_strtoul(str, 0, &audit); if (rc || audit > 1) - printk(KERN_INFO "ima: invalid ima_audit value\n"); + result = 1; else ima_audit = audit; - op = ima_audit ? "ima_audit_enabled" : "ima_audit_not_enabled"; - integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL, NULL, op, 0, 0); + cause = ima_audit ? "enabled" : "not_enabled"; + integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, NULL, + op, cause, result, 0); return 1; } __setup("ima_audit=", ima_audit_setup); @@ -47,20 +49,21 @@ void integrity_audit_msg(int audit_msgno, struct inode *inode, return; ab = audit_log_start(current->audit_context, GFP_KERNEL, audit_msgno); - audit_log_format(ab, "integrity: pid=%d uid=%u auid=%u", + audit_log_format(ab, "integrity: pid=%d uid=%u auid=%u ses=%u", current->pid, current->cred->uid, - audit_get_loginuid(current)); + audit_get_loginuid(current), + audit_get_sessionid(current)); audit_log_task_context(ab); switch (audit_msgno) { case AUDIT_INTEGRITY_DATA: case AUDIT_INTEGRITY_METADATA: case AUDIT_INTEGRITY_PCR: + case AUDIT_INTEGRITY_STATUS: audit_log_format(ab, " op=%s cause=%s", op, cause); break; case AUDIT_INTEGRITY_HASH: audit_log_format(ab, " op=%s hash=%s", op, cause); break; - case AUDIT_INTEGRITY_STATUS: default: audit_log_format(ab, " op=%s", op); } @@ -73,6 +76,6 @@ void integrity_audit_msg(int audit_msgno, struct inode *inode, if (inode) audit_log_format(ab, " dev=%s ino=%lu", inode->i_sb->s_id, inode->i_ino); - audit_log_format(ab, " res=%d", result); + audit_log_format(ab, " res=%d", !result ? 0 : 1); audit_log_end(ab); } diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c index 573780c76f1f..ffbe259700b1 100644 --- a/security/integrity/ima/ima_fs.c +++ b/security/integrity/ima/ima_fs.c @@ -137,7 +137,7 @@ static int ima_measurements_show(struct seq_file *m, void *v) ima_putc(m, &namelen, sizeof namelen); /* 4th: template name */ - ima_putc(m, e->template_name, namelen); + ima_putc(m, (void *)e->template_name, namelen); /* 5th: template specific data */ ima_template_show(m, (struct ima_template_data *)&e->template, diff --git a/security/integrity/ima/ima_init.c b/security/integrity/ima/ima_init.c index cf227dbfac2c..0b0bb8c978cc 100644 --- a/security/integrity/ima/ima_init.c +++ b/security/integrity/ima/ima_init.c @@ -20,7 +20,7 @@ #include "ima.h" /* name for boot aggregate entry */ -static char *boot_aggregate_name = "boot_aggregate"; +static const char *boot_aggregate_name = "boot_aggregate"; int ima_used_chip; /* Add the boot aggregate to the IMA measurement list and extend diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index 23810e0bfc68..b5291ad5ef56 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -12,7 +12,6 @@ */ #include #include -#include #include #include #include @@ -239,8 +238,7 @@ static int ima_parse_rule(char *rule, struct ima_measure_rule_entry *entry) char *p; int result = 0; - ab = audit_log_start(current->audit_context, GFP_KERNEL, - AUDIT_INTEGRITY_STATUS); + ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_INTEGRITY_RULE); entry->action = -1; while ((p = strsep(&rule, " \n")) != NULL) { @@ -345,15 +343,14 @@ static int ima_parse_rule(char *rule, struct ima_measure_rule_entry *entry) AUDIT_SUBJ_TYPE); break; case Opt_err: - printk(KERN_INFO "%s: unknown token: %s\n", - __FUNCTION__, p); + audit_log_format(ab, "UNKNOWN=%s ", p); break; } } if (entry->action == UNKNOWN) result = -EINVAL; - audit_log_format(ab, "res=%d", result); + audit_log_format(ab, "res=%d", !result ? 0 : 1); audit_log_end(ab); return result; } @@ -367,7 +364,7 @@ static int ima_parse_rule(char *rule, struct ima_measure_rule_entry *entry) */ int ima_parse_add_rule(char *rule) { - const char *op = "add_rule"; + const char *op = "update_policy"; struct ima_measure_rule_entry *entry; int result = 0; int audit_info = 0; @@ -394,8 +391,12 @@ int ima_parse_add_rule(char *rule) mutex_lock(&ima_measure_mutex); list_add_tail(&entry->list, &measure_policy_rules); mutex_unlock(&ima_measure_mutex); - } else + } else { kfree(entry); + integrity_audit_msg(AUDIT_INTEGRITY_STATUS, NULL, + NULL, op, "invalid policy", result, + audit_info); + } return result; } -- cgit v1.2.3 From 0852d7a654f75d22a3c09fd7da4a3551bbb37740 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 11 Feb 2009 11:35:15 +0100 Subject: ALSA: hda - Detect multiple digital-out pins Detect multiple digital-out pins in snd_hda_parse_pin_defconfig(). The dig_out_pin and dig_out_type fields become arrays. The codec parser still doesn't use this multiple pins detection, though. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 17 ++++++++++------- sound/pci/hda/hda_local.h | 5 +++-- sound/pci/hda/patch_analog.c | 2 +- sound/pci/hda/patch_realtek.c | 20 ++++++++++---------- sound/pci/hda/patch_sigmatel.c | 10 +++++----- sound/pci/hda/patch_via.c | 10 +++++----- 6 files changed, 34 insertions(+), 30 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 95f10aec7a06..29eeb748561d 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3423,11 +3423,13 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, break; case AC_JACK_SPDIF_OUT: case AC_JACK_DIG_OTHER_OUT: - cfg->dig_out_pin = nid; - if (loc == AC_JACK_LOC_HDMI) - cfg->dig_out_type = HDA_PCM_TYPE_HDMI; - else - cfg->dig_out_type = HDA_PCM_TYPE_SPDIF; + if (cfg->dig_outs >= ARRAY_SIZE(cfg->dig_out_pins)) + continue; + cfg->dig_out_pins[cfg->dig_outs] = nid; + cfg->dig_out_type[cfg->dig_outs] = + (loc == AC_JACK_LOC_HDMI) ? + HDA_PCM_TYPE_HDMI : HDA_PCM_TYPE_SPDIF; + cfg->dig_outs++; break; case AC_JACK_SPDIF_IN: case AC_JACK_DIG_OTHER_IN: @@ -3541,8 +3543,9 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, cfg->hp_pins[1], cfg->hp_pins[2], cfg->hp_pins[3], cfg->hp_pins[4]); snd_printd(" mono: mono_out=0x%x\n", cfg->mono_out_pin); - if (cfg->dig_out_pin) - snd_printd(" dig-out=0x%x\n", cfg->dig_out_pin); + if (cfg->dig_outs) + snd_printd(" dig-out=0x%x/0x%x\n", + cfg->dig_out_pins[0], cfg->dig_out_pins[1]); snd_printd(" inputs: mic=0x%x, fmic=0x%x, line=0x%x, fline=0x%x," " cd=0x%x, aux=0x%x\n", cfg->input_pins[AUTO_PIN_MIC], diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 4086491ed33a..2ae6b53a4628 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -355,10 +355,11 @@ struct auto_pin_cfg { int line_out_type; /* AUTO_PIN_XXX_OUT */ hda_nid_t hp_pins[AUTO_CFG_MAX_OUTS]; hda_nid_t input_pins[AUTO_PIN_LAST]; - hda_nid_t dig_out_pin; + int dig_outs; + hda_nid_t dig_out_pins[2]; hda_nid_t dig_in_pin; hda_nid_t mono_out_pin; - int dig_out_type; /* HDA_PCM_TYPE_XXX */ + int dig_out_type[2]; /* HDA_PCM_TYPE_XXX */ int dig_in_type; /* HDA_PCM_TYPE_XXX */ }; diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 6106dfe8ec04..d58c32b5b433 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -2898,7 +2898,7 @@ static int ad1988_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = AD1988_SPDIF_OUT; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = AD1988_SPDIF_IN; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1db99df79502..e46251bceb9d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4291,7 +4291,7 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = ALC880_DIGIN_NID; @@ -5658,7 +5658,7 @@ static int alc260_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC260_DIGOUT_NID; if (spec->kctls.list) add_mixer(spec, spec->kctls.list); @@ -10626,7 +10626,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; if (!spec->autocfg.line_outs) { - if (spec->autocfg.dig_out_pin || spec->autocfg.dig_in_pin) { + if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) { spec->multiout.max_channels = 2; spec->no_analog = 1; goto dig_only; @@ -10643,9 +10643,9 @@ static int alc262_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; dig_only: - if (spec->autocfg.dig_out_pin) { + if (spec->autocfg.dig_outs) { spec->multiout.dig_out_nid = ALC262_DIGOUT_NID; - spec->dig_out_type = spec->autocfg.dig_out_type; + spec->dig_out_type = spec->autocfg.dig_out_type[0]; } if (spec->autocfg.dig_in_pin) spec->dig_in_nid = ALC262_DIGIN_NID; @@ -11807,7 +11807,7 @@ static int alc268_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = 2; /* digital only support output */ - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC268_DIGOUT_NID; if (spec->kctls.list) @@ -12722,7 +12722,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC269_DIGOUT_NID; if (spec->kctls.list) @@ -13779,7 +13779,7 @@ static int alc861_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC861_DIGOUT_NID; if (spec->kctls.list) @@ -14881,7 +14881,7 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC861VD_DIGOUT_NID; if (spec->kctls.list) @@ -16689,7 +16689,7 @@ static int alc662_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; if (spec->kctls.list) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 12b30884843b..1882c5735879 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2546,7 +2546,7 @@ static int stac92xx_build_pcms(struct hda_codec *codec) codec->num_pcms++; info++; info->name = "STAC92xx Digital"; - info->pcm_type = spec->autocfg.dig_out_type; + info->pcm_type = spec->autocfg.dig_out_type[0]; if (spec->multiout.dig_out_nid) { info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_digital_playback; info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid; @@ -3706,7 +3706,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out if (spec->multiout.max_channels > 2) spec->surr_switch = 1; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = dig_out; if (dig_in && spec->autocfg.dig_in_pin) spec->dig_in_nid = dig_in; @@ -3819,7 +3819,7 @@ static int stac9200_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = 0x05; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = 0x04; @@ -4069,8 +4069,8 @@ static int stac92xx_init(struct hda_codec *codec) for (i = 0; i < spec->num_dmics; i++) stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i], AC_PINCTL_IN_EN); - if (cfg->dig_out_pin) - stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin, + if (cfg->dig_out_pins[0]) + stac92xx_auto_set_pinctl(codec, cfg->dig_out_pins[0], AC_PINCTL_OUT_EN); if (cfg->dig_in_pin) stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin, diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index c761394cbe84..639b2ff510a6 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -1354,7 +1354,7 @@ static int vt1708_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = VT1708_DIGOUT_NID; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = VT1708_DIGIN_NID; @@ -1827,7 +1827,7 @@ static int vt1709_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = VT1709_DIGOUT_NID; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = VT1709_DIGIN_NID; @@ -2371,7 +2371,7 @@ static int vt1708B_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = VT1708B_DIGOUT_NID; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = VT1708B_DIGIN_NID; @@ -2836,7 +2836,7 @@ static int vt1708S_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID; spec->extra_dig_out_nid = 0x15; @@ -3155,7 +3155,7 @@ static int vt1702_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_out_pin) + if (spec->autocfg.dig_outs) spec->multiout.dig_out_nid = VT1702_DIGOUT_NID; spec->extra_dig_out_nid = 0x1B; -- cgit v1.2.3 From c98041f7d71890ac6aa2257d78ef175db44d2cd3 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 11 Feb 2009 20:33:15 -0200 Subject: ALSA: hda - Cleanup setting of pin_configs in patch_stac927x After commit "ALSA: hda - Fix restore of pin configs at resume for STAC/IDT codecs", the introduced stac_save_pin_cfgs function checks already for pins == NULL case, saving then default pin configs from machine with stac92xx_save_bios_config_regs. So we can remove the extra checks when stac927x_brd_tbl[spec->board_config] == NULL. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1882c5735879..3c84817ccd2e 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5292,10 +5292,9 @@ static int patch_stac927x(struct hda_codec *codec) stac927x_models, stac927x_cfg_tbl); again: - if (spec->board_config < 0 || !stac927x_brd_tbl[spec->board_config]) { - if (spec->board_config < 0) - snd_printdd(KERN_INFO "hda_codec: Unknown model for" - "STAC927x, using BIOS defaults\n"); + if (spec->board_config < 0) { + snd_printdd(KERN_INFO "hda_codec: Unknown model for" + "STAC927x, using BIOS defaults\n"); err = stac92xx_save_bios_config_regs(codec); } else err = stac_save_pin_cfgs(codec, -- cgit v1.2.3 From e930e99500e5bd055270c668cca8bd2f33056895 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 11 Feb 2009 14:49:30 -0800 Subject: ALSA: echoaudio - replace uses of __constant_{endian} The base versions handle constant folding now. Signed-off-by: Harvey Harrison Signed-off-by: Takashi Iwai --- sound/pci/echoaudio/echo3g_dsp.c | 2 +- sound/pci/echoaudio/echoaudio_3g.c | 3 +-- sound/pci/echoaudio/echoaudio_dsp.c | 6 +++--- sound/pci/echoaudio/gina20_dsp.c | 4 ++-- sound/pci/echoaudio/layla20_dsp.c | 4 ++-- sound/pci/echoaudio/mia_dsp.c | 4 ++-- sound/pci/echoaudio/midi.c | 4 ++-- 7 files changed, 13 insertions(+), 14 deletions(-) diff --git a/sound/pci/echoaudio/echo3g_dsp.c b/sound/pci/echoaudio/echo3g_dsp.c index 417e25add82b..57967e580571 100644 --- a/sound/pci/echoaudio/echo3g_dsp.c +++ b/sound/pci/echoaudio/echo3g_dsp.c @@ -56,7 +56,7 @@ static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) } chip->comm_page->e3g_frq_register = - __constant_cpu_to_le32((E3G_MAGIC_NUMBER / 48000) - 2); + cpu_to_le32((E3G_MAGIC_NUMBER / 48000) - 2); chip->device_id = device_id; chip->subdevice_id = subdevice_id; chip->bad_board = TRUE; diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c index c3736bbd819e..e32a74897921 100644 --- a/sound/pci/echoaudio/echoaudio_3g.c +++ b/sound/pci/echoaudio/echoaudio_3g.c @@ -40,8 +40,7 @@ static int check_asic_status(struct echoaudio *chip) if (wait_handshake(chip)) return -EIO; - chip->comm_page->ext_box_status = - __constant_cpu_to_le32(E3G_ASIC_NOT_LOADED); + chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED); chip->asic_loaded = FALSE; clear_handshake(chip); send_vector(chip, DSP_VC_TEST_ASIC); diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c index be0e18192de3..4df51ef5e095 100644 --- a/sound/pci/echoaudio/echoaudio_dsp.c +++ b/sound/pci/echoaudio/echoaudio_dsp.c @@ -926,11 +926,11 @@ static int init_dsp_comm_page(struct echoaudio *chip) /* Init the comm page */ chip->comm_page->comm_size = - __constant_cpu_to_le32(sizeof(struct comm_page)); + cpu_to_le32(sizeof(struct comm_page)); chip->comm_page->handshake = 0xffffffff; chip->comm_page->midi_out_free_count = - __constant_cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE); - chip->comm_page->sample_rate = __constant_cpu_to_le32(44100); + cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE); + chip->comm_page->sample_rate = cpu_to_le32(44100); chip->sample_rate = 44100; /* Set line levels so we don't blast any inputs on startup */ diff --git a/sound/pci/echoaudio/gina20_dsp.c b/sound/pci/echoaudio/gina20_dsp.c index db6c952e9d7f..3f1e7475faea 100644 --- a/sound/pci/echoaudio/gina20_dsp.c +++ b/sound/pci/echoaudio/gina20_dsp.c @@ -208,10 +208,10 @@ static int set_professional_spdif(struct echoaudio *chip, char prof) DE_ACT(("set_professional_spdif %d\n", prof)); if (prof) chip->comm_page->flags |= - __constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); + cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); else chip->comm_page->flags &= - ~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); + ~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); chip->professional_spdif = prof; return update_flags(chip); } diff --git a/sound/pci/echoaudio/layla20_dsp.c b/sound/pci/echoaudio/layla20_dsp.c index ede75c6ca0fb..83750e9fd7b4 100644 --- a/sound/pci/echoaudio/layla20_dsp.c +++ b/sound/pci/echoaudio/layla20_dsp.c @@ -284,10 +284,10 @@ static int set_professional_spdif(struct echoaudio *chip, char prof) DE_ACT(("set_professional_spdif %d\n", prof)); if (prof) chip->comm_page->flags |= - __constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); + cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); else chip->comm_page->flags &= - ~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); + ~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); chip->professional_spdif = prof; return update_flags(chip); } diff --git a/sound/pci/echoaudio/mia_dsp.c b/sound/pci/echoaudio/mia_dsp.c index 227386602f9b..3eca16cb7f71 100644 --- a/sound/pci/echoaudio/mia_dsp.c +++ b/sound/pci/echoaudio/mia_dsp.c @@ -222,10 +222,10 @@ static int set_professional_spdif(struct echoaudio *chip, char prof) DE_ACT(("set_professional_spdif %d\n", prof)); if (prof) chip->comm_page->flags |= - __constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); + cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); else chip->comm_page->flags &= - ~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); + ~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF); chip->professional_spdif = prof; return update_flags(chip); } diff --git a/sound/pci/echoaudio/midi.c b/sound/pci/echoaudio/midi.c index 77bf2a83d997..a953d142cb4b 100644 --- a/sound/pci/echoaudio/midi.c +++ b/sound/pci/echoaudio/midi.c @@ -44,10 +44,10 @@ static int enable_midi_input(struct echoaudio *chip, char enable) if (enable) { chip->mtc_state = MIDI_IN_STATE_NORMAL; chip->comm_page->flags |= - __constant_cpu_to_le32(DSP_FLAG_MIDI_INPUT); + cpu_to_le32(DSP_FLAG_MIDI_INPUT); } else chip->comm_page->flags &= - ~__constant_cpu_to_le32(DSP_FLAG_MIDI_INPUT); + ~cpu_to_le32(DSP_FLAG_MIDI_INPUT); clear_handshake(chip); return send_vector(chip, DSP_VC_UPDATE_FLAGS); -- cgit v1.2.3 From 1d93e52eb48df986a3c4d5ad8a520bf1f6837367 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 11 Feb 2009 08:47:19 -0700 Subject: dmaengine: update kerneldoc Some of the kerneldoc comments in the dmaengine header describe already removed structure members. Remove them. Also add a short description for dma_device->device_is_tx_complete. Signed-off-by: Johannes Weiner Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 3e68469c1885..087e79acf8c7 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -97,7 +97,6 @@ typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t; /** * struct dma_chan_percpu - the per-CPU part of struct dma_chan - * @refcount: local_t used for open-coded "bigref" counting * @memcpy_count: transaction counter * @bytes_transferred: byte counter */ @@ -114,9 +113,6 @@ struct dma_chan_percpu { * @cookie: last cookie value returned to client * @chan_id: channel ID for sysfs * @dev: class device for sysfs - * @refcount: kref, used in "bigref" slow-mode - * @slow_ref: indicates that the DMA channel is free - * @rcu: the DMA channel's RCU head * @device_node: used to add this to the device chan list * @local: per-cpu pointer to a struct dma_chan_percpu * @client-count: how many clients are using this channel @@ -211,8 +207,6 @@ struct dma_async_tx_descriptor { * @global_node: list_head for global dma_device_list * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability - * @refcount: reference count - * @done: IO completion struct * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @device_alloc_chan_resources: allocate resources and return the @@ -225,6 +219,7 @@ struct dma_async_tx_descriptor { * @device_prep_dma_interrupt: prepares an end of chain interrupt operation * @device_prep_slave_sg: prepares a slave dma operation * @device_terminate_all: terminate all pending operations + * @device_is_tx_complete: poll for transaction completion * @device_issue_pending: push pending transactions to hardware */ struct dma_device { -- cgit v1.2.3 From f9ce1f1cda8b73a36f47e424975a9dfa78b7840c Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:11 +0900 Subject: Add in_execve flag into task_struct. This patch allows LSM modules to determine whether current process is in an execve operation or not so that they can behave differently while an execve operation is in progress. This patch is needed by TOMOYO. Please see another patch titled "LSM adapter functions." for backgrounds. Signed-off-by: Tetsuo Handa Signed-off-by: David Howells Signed-off-by: James Morris --- fs/compat.c | 3 +++ fs/exec.c | 3 +++ include/linux/sched.h | 2 ++ 3 files changed, 8 insertions(+) diff --git a/fs/compat.c b/fs/compat.c index 65a070e705ab..25589f8322f2 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1402,6 +1402,7 @@ int compat_do_execve(char * filename, retval = mutex_lock_interruptible(¤t->cred_exec_mutex); if (retval < 0) goto out_free; + current->in_execve = 1; retval = -ENOMEM; bprm->cred = prepare_exec_creds(); @@ -1454,6 +1455,7 @@ int compat_do_execve(char * filename, goto out; /* execve succeeded */ + current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); acct_update_integrals(current); free_bprm(bprm); @@ -1470,6 +1472,7 @@ out_file: } out_unlock: + current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); out_free: diff --git a/fs/exec.c b/fs/exec.c index febfd8ed6ad1..9881dc3bb488 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1278,6 +1278,7 @@ int do_execve(char * filename, retval = mutex_lock_interruptible(¤t->cred_exec_mutex); if (retval < 0) goto out_free; + current->in_execve = 1; retval = -ENOMEM; bprm->cred = prepare_exec_creds(); @@ -1331,6 +1332,7 @@ int do_execve(char * filename, goto out; /* execve succeeded */ + current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); acct_update_integrals(current); free_bprm(bprm); @@ -1349,6 +1351,7 @@ out_file: } out_unlock: + current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); out_free: diff --git a/include/linux/sched.h b/include/linux/sched.h index 2127e959e0f4..397c20cfb6a5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1158,6 +1158,8 @@ struct task_struct { /* ??? */ unsigned int personality; unsigned did_exec:1; + unsigned in_execve:1; /* Tell the LSMs that the process is doing an + * execve */ pid_t pid; pid_t tgid; -- cgit v1.2.3 From c73bd6d473ceb5d643d3afd7e75b7dc2e6918558 Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:12 +0900 Subject: Memory and pathname management functions. TOMOYO Linux performs pathname based access control. To remove factors that make pathname based access control difficult (e.g. symbolic links, "..", "//" etc.), TOMOYO Linux derives realpath of requested pathname from "struct dentry" and "struct vfsmount". The maximum length of string data is limited to 4000 including trailing '\0'. Since TOMOYO Linux uses '\ooo' style representation for non ASCII printable characters, maybe TOMOYO Linux should be able to support 16336 (which means (NAME_MAX * (PATH_MAX / (NAME_MAX + 1)) * 4 + (PATH_MAX / (NAME_MAX + 1))) including trailing '\0'), but I think 4000 is enough for practical use. TOMOYO uses only 0x21 - 0x7E (as printable characters) and 0x20 (as word delimiter) and 0x0A (as line delimiter). 0x01 - 0x20 and 0x80 - 0xFF is handled in \ooo style representation. The reason to use \ooo is to guarantee that "%s" won't damage logs. Userland program can request open("/tmp/file granted.\nAccess /tmp/file ", O_WRONLY | O_CREAT, 0600) and logging such crazy pathname using "Access %s denied.\n" format will cause "fabrication of logs" like Access /tmp/file granted. Access /tmp/file denied. TOMOYO converts such characters to \ooo so that the logs will become Access /tmp/file\040granted.\012Access\040/tmp/file denied. and the administrator can read the logs safely using /bin/cat . Likewise, a crazy request like open("/tmp/\x01\x02\x03\x04\x05\x06\x07\x08\x09", O_WRONLY | O_CREAT, 0600) will be processed safely by converting to Access /tmp/\001\002\003\004\005\006\007\010\011 denied. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/realpath.c | 487 +++++++++++++++++++++++++++++++++++++++++++++ security/tomoyo/realpath.h | 63 ++++++ 2 files changed, 550 insertions(+) create mode 100644 security/tomoyo/realpath.c create mode 100644 security/tomoyo/realpath.h diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c new file mode 100644 index 000000000000..5fd48d23a217 --- /dev/null +++ b/security/tomoyo/realpath.c @@ -0,0 +1,487 @@ +/* + * security/tomoyo/realpath.c + * + * Get the canonicalized absolute pathnames. The basis for TOMOYO. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#include +#include +#include +#include "common.h" +#include "realpath.h" + +/** + * tomoyo_encode: Convert binary string to ascii string. + * + * @buffer: Buffer for ASCII string. + * @buflen: Size of @buffer. + * @str: Binary string. + * + * Returns 0 on success, -ENOMEM otherwise. + */ +int tomoyo_encode(char *buffer, int buflen, const char *str) +{ + while (1) { + const unsigned char c = *(unsigned char *) str++; + + if (tomoyo_is_valid(c)) { + if (--buflen <= 0) + break; + *buffer++ = (char) c; + if (c != '\\') + continue; + if (--buflen <= 0) + break; + *buffer++ = (char) c; + continue; + } + if (!c) { + if (--buflen <= 0) + break; + *buffer = '\0'; + return 0; + } + buflen -= 4; + if (buflen <= 0) + break; + *buffer++ = '\\'; + *buffer++ = (c >> 6) + '0'; + *buffer++ = ((c >> 3) & 7) + '0'; + *buffer++ = (c & 7) + '0'; + } + return -ENOMEM; +} + +/** + * tomoyo_realpath_from_path2 - Returns realpath(3) of the given dentry but ignores chroot'ed root. + * + * @path: Pointer to "struct path". + * @newname: Pointer to buffer to return value in. + * @newname_len: Size of @newname. + * + * Returns 0 on success, negative value otherwise. + * + * If dentry is a directory, trailing '/' is appended. + * Characters out of 0x20 < c < 0x7F range are converted to + * \ooo style octal string. + * Character \ is converted to \\ string. + */ +int tomoyo_realpath_from_path2(struct path *path, char *newname, + int newname_len) +{ + int error = -ENOMEM; + struct dentry *dentry = path->dentry; + char *sp; + + if (!dentry || !path->mnt || !newname || newname_len <= 2048) + return -EINVAL; + if (dentry->d_op && dentry->d_op->d_dname) { + /* For "socket:[\$]" and "pipe:[\$]". */ + static const int offset = 1536; + sp = dentry->d_op->d_dname(dentry, newname + offset, + newname_len - offset); + } else { + /* Taken from d_namespace_path(). */ + struct path root; + struct path ns_root = { }; + struct path tmp; + + read_lock(¤t->fs->lock); + root = current->fs->root; + path_get(&root); + read_unlock(¤t->fs->lock); + spin_lock(&vfsmount_lock); + if (root.mnt && root.mnt->mnt_ns) + ns_root.mnt = mntget(root.mnt->mnt_ns->root); + if (ns_root.mnt) + ns_root.dentry = dget(ns_root.mnt->mnt_root); + spin_unlock(&vfsmount_lock); + spin_lock(&dcache_lock); + tmp = ns_root; + sp = __d_path(path, &tmp, newname, newname_len); + spin_unlock(&dcache_lock); + path_put(&root); + path_put(&ns_root); + } + if (IS_ERR(sp)) + error = PTR_ERR(sp); + else + error = tomoyo_encode(newname, sp - newname, sp); + /* Append trailing '/' if dentry is a directory. */ + if (!error && dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode) + && *newname) { + sp = newname + strlen(newname); + if (*(sp - 1) != '/') { + if (sp < newname + newname_len - 4) { + *sp++ = '/'; + *sp = '\0'; + } else { + error = -ENOMEM; + } + } + } + if (error) + printk(KERN_WARNING "tomoyo_realpath: Pathname too long.\n"); + return error; +} + +/** + * tomoyo_realpath_from_path - Returns realpath(3) of the given pathname but ignores chroot'ed root. + * + * @path: Pointer to "struct path". + * + * Returns the realpath of the given @path on success, NULL otherwise. + * + * These functions use tomoyo_alloc(), so the caller must call tomoyo_free() + * if these functions didn't return NULL. + */ +char *tomoyo_realpath_from_path(struct path *path) +{ + char *buf = tomoyo_alloc(sizeof(struct tomoyo_page_buffer)); + + BUILD_BUG_ON(sizeof(struct tomoyo_page_buffer) + <= TOMOYO_MAX_PATHNAME_LEN - 1); + if (!buf) + return NULL; + if (tomoyo_realpath_from_path2(path, buf, + TOMOYO_MAX_PATHNAME_LEN - 1) == 0) + return buf; + tomoyo_free(buf); + return NULL; +} + +/** + * tomoyo_realpath - Get realpath of a pathname. + * + * @pathname: The pathname to solve. + * + * Returns the realpath of @pathname on success, NULL otherwise. + */ +char *tomoyo_realpath(const char *pathname) +{ + struct nameidata nd; + + if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) { + char *buf = tomoyo_realpath_from_path(&nd.path); + path_put(&nd.path); + return buf; + } + return NULL; +} + +/** + * tomoyo_realpath_nofollow - Get realpath of a pathname. + * + * @pathname: The pathname to solve. + * + * Returns the realpath of @pathname on success, NULL otherwise. + */ +char *tomoyo_realpath_nofollow(const char *pathname) +{ + struct nameidata nd; + + if (pathname && path_lookup(pathname, 0, &nd) == 0) { + char *buf = tomoyo_realpath_from_path(&nd.path); + path_put(&nd.path); + return buf; + } + return NULL; +} + +/* Memory allocated for non-string data. */ +static unsigned int tomoyo_allocated_memory_for_elements; +/* Quota for holding non-string data. */ +static unsigned int tomoyo_quota_for_elements; + +/** + * tomoyo_alloc_element - Allocate permanent memory for structures. + * + * @size: Size in bytes. + * + * Returns pointer to allocated memory on success, NULL otherwise. + * + * Memory has to be zeroed. + * The RAM is chunked, so NEVER try to kfree() the returned pointer. + */ +void *tomoyo_alloc_element(const unsigned int size) +{ + static char *buf; + static DEFINE_MUTEX(lock); + static unsigned int buf_used_len = PATH_MAX; + char *ptr = NULL; + /*Assumes sizeof(void *) >= sizeof(long) is true. */ + const unsigned int word_aligned_size + = roundup(size, max(sizeof(void *), sizeof(long))); + if (word_aligned_size > PATH_MAX) + return NULL; + /***** EXCLUSIVE SECTION START *****/ + mutex_lock(&lock); + if (buf_used_len + word_aligned_size > PATH_MAX) { + if (!tomoyo_quota_for_elements || + tomoyo_allocated_memory_for_elements + + PATH_MAX <= tomoyo_quota_for_elements) + ptr = kzalloc(PATH_MAX, GFP_KERNEL); + if (!ptr) { + printk(KERN_WARNING "ERROR: Out of memory " + "for tomoyo_alloc_element().\n"); + if (!tomoyo_policy_loaded) + panic("MAC Initialization failed.\n"); + } else { + buf = ptr; + tomoyo_allocated_memory_for_elements += PATH_MAX; + buf_used_len = word_aligned_size; + ptr = buf; + } + } else if (word_aligned_size) { + int i; + ptr = buf + buf_used_len; + buf_used_len += word_aligned_size; + for (i = 0; i < word_aligned_size; i++) { + if (!ptr[i]) + continue; + printk(KERN_ERR "WARNING: Reserved memory was tainted! " + "The system might go wrong.\n"); + ptr[i] = '\0'; + } + } + mutex_unlock(&lock); + /***** EXCLUSIVE SECTION END *****/ + return ptr; +} + +/* Memory allocated for string data in bytes. */ +static unsigned int tomoyo_allocated_memory_for_savename; +/* Quota for holding string data in bytes. */ +static unsigned int tomoyo_quota_for_savename; + +/* + * TOMOYO uses this hash only when appending a string into the string + * table. Frequency of appending strings is very low. So we don't need + * large (e.g. 64k) hash size. 256 will be sufficient. + */ +#define TOMOYO_MAX_HASH 256 + +/* Structure for string data. */ +struct tomoyo_name_entry { + struct list_head list; + struct tomoyo_path_info entry; +}; + +/* Structure for available memory region. */ +struct tomoyo_free_memory_block_list { + struct list_head list; + char *ptr; /* Pointer to a free area. */ + int len; /* Length of the area. */ +}; + +/* + * The list for "struct tomoyo_name_entry". + * + * This list is updated only inside tomoyo_save_name(), thus + * no global mutex exists. + */ +static struct list_head tomoyo_name_list[TOMOYO_MAX_HASH]; + +/** + * tomoyo_save_name - Allocate permanent memory for string data. + * + * @name: The string to store into the permernent memory. + * + * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise. + * + * The RAM is shared, so NEVER try to modify or kfree() the returned name. + */ +const struct tomoyo_path_info *tomoyo_save_name(const char *name) +{ + static LIST_HEAD(fmb_list); + static DEFINE_MUTEX(lock); + struct tomoyo_name_entry *ptr; + unsigned int hash; + /* fmb contains available size in bytes. + fmb is removed from the fmb_list when fmb->len becomes 0. */ + struct tomoyo_free_memory_block_list *fmb; + int len; + char *cp; + + if (!name) + return NULL; + len = strlen(name) + 1; + if (len > TOMOYO_MAX_PATHNAME_LEN) { + printk(KERN_WARNING "ERROR: Name too long " + "for tomoyo_save_name().\n"); + return NULL; + } + hash = full_name_hash((const unsigned char *) name, len - 1); + /***** EXCLUSIVE SECTION START *****/ + mutex_lock(&lock); + list_for_each_entry(ptr, &tomoyo_name_list[hash % TOMOYO_MAX_HASH], + list) { + if (hash == ptr->entry.hash && !strcmp(name, ptr->entry.name)) + goto out; + } + list_for_each_entry(fmb, &fmb_list, list) { + if (len <= fmb->len) + goto ready; + } + if (!tomoyo_quota_for_savename || + tomoyo_allocated_memory_for_savename + PATH_MAX + <= tomoyo_quota_for_savename) + cp = kzalloc(PATH_MAX, GFP_KERNEL); + else + cp = NULL; + fmb = kzalloc(sizeof(*fmb), GFP_KERNEL); + if (!cp || !fmb) { + kfree(cp); + kfree(fmb); + printk(KERN_WARNING "ERROR: Out of memory " + "for tomoyo_save_name().\n"); + if (!tomoyo_policy_loaded) + panic("MAC Initialization failed.\n"); + ptr = NULL; + goto out; + } + tomoyo_allocated_memory_for_savename += PATH_MAX; + list_add(&fmb->list, &fmb_list); + fmb->ptr = cp; + fmb->len = PATH_MAX; + ready: + ptr = tomoyo_alloc_element(sizeof(*ptr)); + if (!ptr) + goto out; + ptr->entry.name = fmb->ptr; + memmove(fmb->ptr, name, len); + tomoyo_fill_path_info(&ptr->entry); + fmb->ptr += len; + fmb->len -= len; + list_add_tail(&ptr->list, &tomoyo_name_list[hash % TOMOYO_MAX_HASH]); + if (fmb->len == 0) { + list_del(&fmb->list); + kfree(fmb); + } + out: + mutex_unlock(&lock); + /***** EXCLUSIVE SECTION END *****/ + return ptr ? &ptr->entry : NULL; +} + +/** + * tomoyo_realpath_init - Initialize realpath related code. + * + * Returns 0. + */ +static int __init tomoyo_realpath_init(void) +{ + int i; + + BUILD_BUG_ON(TOMOYO_MAX_PATHNAME_LEN > PATH_MAX); + for (i = 0; i < TOMOYO_MAX_HASH; i++) + INIT_LIST_HEAD(&tomoyo_name_list[i]); + INIT_LIST_HEAD(&tomoyo_kernel_domain.acl_info_list); + tomoyo_kernel_domain.domainname = tomoyo_save_name(TOMOYO_ROOT_NAME); + list_add_tail(&tomoyo_kernel_domain.list, &tomoyo_domain_list); + down_read(&tomoyo_domain_list_lock); + if (tomoyo_find_domain(TOMOYO_ROOT_NAME) != &tomoyo_kernel_domain) + panic("Can't register tomoyo_kernel_domain"); + up_read(&tomoyo_domain_list_lock); + return 0; +} + +security_initcall(tomoyo_realpath_init); + +/* Memory allocated for temporary purpose. */ +static atomic_t tomoyo_dynamic_memory_size; + +/** + * tomoyo_alloc - Allocate memory for temporary purpose. + * + * @size: Size in bytes. + * + * Returns pointer to allocated memory on success, NULL otherwise. + */ +void *tomoyo_alloc(const size_t size) +{ + void *p = kzalloc(size, GFP_KERNEL); + if (p) + atomic_add(ksize(p), &tomoyo_dynamic_memory_size); + return p; +} + +/** + * tomoyo_free - Release memory allocated by tomoyo_alloc(). + * + * @p: Pointer returned by tomoyo_alloc(). May be NULL. + * + * Returns nothing. + */ +void tomoyo_free(const void *p) +{ + if (p) { + atomic_sub(ksize(p), &tomoyo_dynamic_memory_size); + kfree(p); + } +} + +/** + * tomoyo_read_memory_counter - Check for memory usage in bytes. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns memory usage. + */ +int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head) +{ + if (!head->read_eof) { + const unsigned int shared + = tomoyo_allocated_memory_for_savename; + const unsigned int private + = tomoyo_allocated_memory_for_elements; + const unsigned int dynamic + = atomic_read(&tomoyo_dynamic_memory_size); + char buffer[64]; + + memset(buffer, 0, sizeof(buffer)); + if (tomoyo_quota_for_savename) + snprintf(buffer, sizeof(buffer) - 1, + " (Quota: %10u)", + tomoyo_quota_for_savename); + else + buffer[0] = '\0'; + tomoyo_io_printf(head, "Shared: %10u%s\n", shared, buffer); + if (tomoyo_quota_for_elements) + snprintf(buffer, sizeof(buffer) - 1, + " (Quota: %10u)", + tomoyo_quota_for_elements); + else + buffer[0] = '\0'; + tomoyo_io_printf(head, "Private: %10u%s\n", private, buffer); + tomoyo_io_printf(head, "Dynamic: %10u\n", dynamic); + tomoyo_io_printf(head, "Total: %10u\n", + shared + private + dynamic); + head->read_eof = true; + } + return 0; +} + +/** + * tomoyo_write_memory_quota - Set memory quota. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0. + */ +int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head) +{ + char *data = head->write_buf; + unsigned int size; + + if (sscanf(data, "Shared: %u", &size) == 1) + tomoyo_quota_for_savename = size; + else if (sscanf(data, "Private: %u", &size) == 1) + tomoyo_quota_for_elements = size; + return 0; +} diff --git a/security/tomoyo/realpath.h b/security/tomoyo/realpath.h new file mode 100644 index 000000000000..0ea541fcb53c --- /dev/null +++ b/security/tomoyo/realpath.h @@ -0,0 +1,63 @@ +/* + * security/tomoyo/realpath.h + * + * Get the canonicalized absolute pathnames. The basis for TOMOYO. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#ifndef _SECURITY_TOMOYO_REALPATH_H +#define _SECURITY_TOMOYO_REALPATH_H + +struct path; +struct tomoyo_path_info; +struct tomoyo_io_buffer; + +/* Convert binary string to ascii string. */ +int tomoyo_encode(char *buffer, int buflen, const char *str); + +/* Returns realpath(3) of the given pathname but ignores chroot'ed root. */ +int tomoyo_realpath_from_path2(struct path *path, char *newname, + int newname_len); + +/* + * Returns realpath(3) of the given pathname but ignores chroot'ed root. + * These functions use tomoyo_alloc(), so the caller must call tomoyo_free() + * if these functions didn't return NULL. + */ +char *tomoyo_realpath(const char *pathname); +/* + * Same with tomoyo_realpath() except that it doesn't follow the final symlink. + */ +char *tomoyo_realpath_nofollow(const char *pathname); +/* Same with tomoyo_realpath() except that the pathname is already solved. */ +char *tomoyo_realpath_from_path(struct path *path); + +/* + * Allocate memory for ACL entry. + * The RAM is chunked, so NEVER try to kfree() the returned pointer. + */ +void *tomoyo_alloc_element(const unsigned int size); + +/* + * Keep the given name on the RAM. + * The RAM is shared, so NEVER try to modify or kfree() the returned name. + */ +const struct tomoyo_path_info *tomoyo_save_name(const char *name); + +/* Allocate memory for temporary use (e.g. permission checks). */ +void *tomoyo_alloc(const size_t size); + +/* Free memory allocated by tomoyo_alloc(). */ +void tomoyo_free(const void *p); + +/* Check for memory usage. */ +int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head); + +/* Set memory quota. */ +int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head); + +#endif /* !defined(_SECURITY_TOMOYO_REALPATH_H) */ -- cgit v1.2.3 From 9590837b89aaa4523209ac91c52db5ea0d9142fd Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:13 +0900 Subject: Common functions for TOMOYO Linux. This file contains common functions (e.g. policy I/O, pattern matching). -------------------- About pattern matching -------------------- Since TOMOYO Linux is a name based access control, TOMOYO Linux seriously considers "safe" string representation. TOMOYO Linux's string manipulation functions make reviewers feel crazy, but there are reasons why TOMOYO Linux needs its own string manipulation functions. ----- Part 1 : preconditions ----- People definitely want to use wild card. To support pattern matching, we have to support wild card characters. In a typical Linux system, filenames are likely consists of only alphabets, numbers, and some characters (e.g. + - ~ . / ). But theoretically, the Linux kernel accepts all characters but NUL character (which is used as a terminator of a string). Some Linux systems can have filenames which contain * ? ** etc. Therefore, we have to somehow modify string so that we can distinguish wild card characters and normal characters. It might be possible for some application's configuration files to restrict acceptable characters. It is impossible for kernel to restrict acceptable characters. We can't accept approaches which will cause troubles for applications. ----- Part 2 : commonly used approaches ----- Text formatted strings separated by space character (0x20) and new line character (0x0A) is more preferable for users over array of NUL-terminated string. Thus, people use text formatted configuration files separated by space character and new line. We sometimes need to handle non-printable characters. Thus, people use \ character (0x5C) as escape character and represent non-printable characters using octal or hexadecimal format. At this point, we remind (at least) 3 approaches. (1) Shell glob style expression (2) POSIX regular expression (UNIX style regular expression) (3) Maverick wild card expression On the surface, (1) and (2) sound good choices. But they have a big pitfall. All meta-characters in (1) and (2) are legal characters for representing a pathname, and users easily write incorrect expression. What is worse, users unlikely notice incorrect expressions because characters used for regular pathnames unlikely contain meta-characters. This incorrect use of meta-characters in pathname representation reveals vulnerability (e.g. unexpected results) only when irregular pathname is specified. The authors of TOMOYO Linux think that approaches which adds some character for interpreting meta-characters as normal characters (i.e. (1) and (2)) are not suitable for security use. Therefore, the authors of TOMOYO Linux propose (3). ----- Part 3: consideration points ----- We need to solve encoding problem. A single character can be represented in several ways using encodings. For Japanese language, there are "ShiftJIS", "ISO-2022-JP", "EUC-JP", "UTF-8" and more. Some languages (e.g. Japanese language) supports multi-byte characters (where a single character is represented using several bytes). Some multi-byte characters may match the escape character. For Japanese language, some characters in "ShiftJIS" encoding match \ character, and bothering Web's CGI developers. It is important that the kernel string is not bothered by encoding problem. Linus said, "I really would expect that kernel strings don't have an encoding. They're just C strings: a NUL-terminated stream of bytes." http://lkml.org/lkml/2007/11/6/142 Yes. The kernel strings are just C strings. We are talking about how to store and carry "kernel strings" safely. If we store "kernel string" into policy file as-is, the "kernel string" will be interpreted differently depending on application's encoding settings. One application may interpret "kernel string" as "UTF-8", another application may interpret "kernel string" as "ShiftJIS". Therefore, we propose to represent strings using ASCII encoding. In this way, we are no longer bothered by encoding problems. We need to avoid information loss caused by display. It is difficult to input and display non-printable characters, but we have to be able to handle such characters because the kernel string is a C string. If we use only ASCII printable characters (from 0x21 to 0x7E) and space character (0x20) and new line character (0x0A), it is easy to input from keyboard and display on all terminals which is running Linux. Therefore, we propose to represent strings using only characters which value is one of "from 0x21 to 0x7E", "0x20", "0x0A". We need to consider ease of splitting strings from a line. If we use an approach which uses "\ " for representing a space character within a string, we have to count the string from the beginning to check whether this space character is accompanied with \ character or not. As a result, we cannot monotonically split a line using space character. If we use an approach which uses "\040" for representing a space character within a string, we can monotonically split a line using space character. If we use an approach which uses NUL character as a delimiter, we cannot use string manipulation functions for splitting strings from a line. Therefore, we propose that we represent space character as "\040". We need to avoid wrong designations (incorrect use of special characters). Not all users can understand and utilize POSIX's regular expressions correctly and perfectly. If a character acts as a wild card by default, the user will get unexpected result if that user didn't know the meaning of that character. Therefore, we propose that all characters but \ character act as a normal character and let the user add \ character to make a character act as a wild card. In this way, users needn't to know all wild card characters beforehand. They can learn when they encountered an unseen wild card character for their first time. ----- Part 4: supported wild card expressions ----- At this point, we have wild card expressions listed below. +-----------+--------------------------------------------------------------+ | Wild card | Meaning and example | +-----------+--------------------------------------------------------------+ | \* | More than or equals to 0 character other than '/'. | | | /var/log/samba/\* | +-----------+--------------------------------------------------------------+ | \@ | More than or equals to 0 character other than '/' or '.'. | | | /var/www/html/\@.html | +-----------+--------------------------------------------------------------+ | \? | 1 byte character other than '/'. | | | /tmp/mail.\?\?\?\?\?\? | +-----------+--------------------------------------------------------------+ | \$ | More than or equals to 1 decimal digit. | | | /proc/\$/cmdline | +-----------+--------------------------------------------------------------+ | \+ | 1 decimal digit. | | | /var/tmp/my_work.\+ | +-----------+--------------------------------------------------------------+ | \X | More than or equals to 1 hexadecimal digit. | | | /var/tmp/my-work.\X | +-----------+--------------------------------------------------------------+ | \x | 1 hexadecimal digit. | | | /tmp/my-work.\x | +-----------+--------------------------------------------------------------+ | \A | More than or equals to 1 alphabet character. | | | /var/log/my-work/\$-\A-\$.log | +-----------+--------------------------------------------------------------+ | \a | 1 alphabet character. | | | /home/users/\a/\*/public_html/\*.html | +-----------+--------------------------------------------------------------+ | \- | Pathname subtraction operator. | | | +---------------------+------------------------------------+ | | | | Example | Meaning | | | | +---------------------+------------------------------------+ | | | | /etc/\* | All files in /etc/ directory. | | | | +---------------------+------------------------------------+ | | | | /etc/\*\-\*shadow\* | /etc/\* other than /etc/\*shadow\* | | | | +---------------------+------------------------------------+ | | | | /\*\-proc\-sys/ | /\*/ other than /proc/ /sys/ | | | | +---------------------+------------------------------------+ | +-----------+--------------------------------------------------------------+ +----------------+---------------------------------------------------------+ | Representation | Meaning and example | +----------------+---------------------------------------------------------+ | \\ | backslash character itself. | +----------------+---------------------------------------------------------+ | \ooo | 1 byte character. | | | ooo is 001 <= ooo <= 040 || 177 <= ooo <= 377. | | | | | | \040 for space character. | | | \177 for del character. | | | | +----------------+---------------------------------------------------------+ ----- Part 5: Advantages ----- We can obtain extensibility. Since our proposed approach adds \ to a character to interpret as a wild card, we can introduce new wild card in future while maintaining backward compatibility. We can process monotonically. Since our proposed approach separates strings using a space character, we can split strings using existing string manipulation functions. We can reliably analyze access logs. It is guaranteed that a string doesn't contain space character (0x20) and new line character (0x0A). It is guaranteed that a string won't be converted by FTP and won't be damaged by a terminal's settings. It is guaranteed that a string won't be affected by encoding converters (except encodings which insert NUL character (e.g. UTF-16)). ----- Part 6: conclusion ----- TOMOYO Linux is using its own encoding with reasons described above. There is a disadvantage that we need to introduce a series of new string manipulation functions. But TOMOYO Linux's encoding is useful for all users (including audit and AppArmor) who want to perform pattern matching and safely exchange string information between the kernel and the userspace. -------------------- About policy interface -------------------- TOMOYO Linux creates the following files on securityfs (normally mounted on /sys/kernel/security) as interfaces between kernel and userspace. These files are for TOMOYO Linux management tools *only*, not for general programs. * profile * exception_policy * domain_policy * manager * meminfo * self_domain * version * .domain_status * .process_status ** /sys/kernel/security/tomoyo/profile ** This file is used to read or write profiles. "profile" means a running mode of process. A profile lists up functions and their modes in "$number-$variable=$value" format. The $number is profile number between 0 and 255. Each domain is assigned one profile. To assign profile to domains, use "ccs-setprofile" or "ccs-editpolicy" or "ccs-loadpolicy" commands. (Example) [root@tomoyo]# cat /sys/kernel/security/tomoyo/profile 0-COMMENT=-----Disabled Mode----- 0-MAC_FOR_FILE=disabled 0-MAX_ACCEPT_ENTRY=2048 0-TOMOYO_VERBOSE=disabled 1-COMMENT=-----Learning Mode----- 1-MAC_FOR_FILE=learning 1-MAX_ACCEPT_ENTRY=2048 1-TOMOYO_VERBOSE=disabled 2-COMMENT=-----Permissive Mode----- 2-MAC_FOR_FILE=permissive 2-MAX_ACCEPT_ENTRY=2048 2-TOMOYO_VERBOSE=enabled 3-COMMENT=-----Enforcing Mode----- 3-MAC_FOR_FILE=enforcing 3-MAX_ACCEPT_ENTRY=2048 3-TOMOYO_VERBOSE=enabled - MAC_FOR_FILE: Specifies access control level regarding file access requests. - MAX_ACCEPT_ENTRY: Limits the max number of ACL entries that are automatically appended during learning mode. Default is 2048. - TOMOYO_VERBOSE: Specifies whether to print domain policy violation messages or not. ** /sys/kernel/security/tomoyo/manager ** This file is used to read or append the list of programs or domains that can write to /sys/kernel/security/tomoyo interface. By default, only processes with both UID = 0 and EUID = 0 can modify policy via /sys/kernel/security/tomoyo interface. You can use keyword "manage_by_non_root" to allow policy modification by non root user. (Example) [root@tomoyo]# cat /sys/kernel/security/tomoyo/manager /usr/lib/ccs/loadpolicy /usr/lib/ccs/editpolicy /usr/lib/ccs/setlevel /usr/lib/ccs/setprofile /usr/lib/ccs/ld-watch /usr/lib/ccs/ccs-queryd ** /sys/kernel/security/tomoyo/exception_policy ** This file is used to read and write system global settings. Each line has a directive and operand pair. Directives are listed below. - initialize_domain: To initialize domain transition when specific program is executed, use initialize_domain directive. * initialize_domain "program" from "domain" * initialize_domain "program" from "the last program part of domain" * initialize_domain "program" If the part "from" and after is not given, the entry is applied to all domain. If the "domain" doesn't start with "", the entry is applied to all domain whose domainname ends with "the last program part of domain". This directive is intended to aggregate domain transitions for daemon program and program that are invoked by the kernel on demand, by transiting to different domain. - keep_domain To prevent domain transition when program is executed from specific domain, use keep_domain directive. * keep_domain "program" from "domain" * keep_domain "program" from "the last program part of domain" * keep_domain "domain" * keep_domain "the last program part of domain" If the part "from" and before is not given, this entry is applied to all program. If the "domain" doesn't start with "", the entry is applied to all domain whose domainname ends with "the last program part of domain". This directive is intended to reduce total number of domains and memory usage by suppressing unneeded domain transitions. To declare domain keepers, use keep_domain directive followed by domain definition. Any process that belongs to any domain declared with this directive, the process stays at the same domain unless any program registered with initialize_domain directive is executed. In order to control domain transition in detail, you can use no_keep_domain/no_initialize_domain keywrods. - alias: To allow executing programs using the name of symbolic links, use alias keyword followed by dereferenced pathname and reference pathname. For example, /sbin/pidof is a symbolic link to /sbin/killall5 . In normal case, if /sbin/pidof is executed, the domain is defined as if /sbin/killall5 is executed. By specifying "alias /sbin/killall5 /sbin/pidof", you can run /sbin/pidof in the domain for /sbin/pidof . (Example) alias /sbin/killall5 /sbin/pidof - allow_read: To grant unconditionally readable permissions, use allow_read keyword followed by canonicalized file. This keyword is intended to reduce size of domain policy by granting read access to library files such as GLIBC and locale files. Exception is, if ignore_global_allow_read keyword is given to a domain, entries specified by this keyword are ignored. (Example) allow_read /lib/libc-2.5.so - file_pattern: To declare pathname pattern, use file_pattern keyword followed by pathname pattern. The pathname pattern must be a canonicalized Pathname. This keyword is not applicable to neither granting execute permissions nor domain definitions. For example, canonicalized pathname that contains a process ID (i.e. /proc/PID/ files) needs to be grouped in order to make access control work well. (Example) file_pattern /proc/\$/cmdline - path_group To declare pathname group, use path_group keyword followed by name of the group and pathname pattern. For example, if you want to group all files under home directory, you can define path_group HOME-DIR-FILE /home/\*/\* path_group HOME-DIR-FILE /home/\*/\*/\* path_group HOME-DIR-FILE /home/\*/\*/\*/\* in the exception policy and use like allow_read @HOME-DIR-FILE to grant file access permission. - deny_rewrite: To deny overwriting already written contents of file (such as log files) by default, use deny_rewrite keyword followed by pathname pattern. Files whose pathname match the patterns are not permitted to open for writing without append mode or truncate unless the pathnames are explicitly granted using allow_rewrite keyword in domain policy. (Example) deny_rewrite /var/log/\* - aggregator To deal multiple programs as a single program, use aggregator keyword followed by name of original program and aggregated program. This keyword is intended to aggregate similar programs. For example, /usr/bin/tac and /bin/cat are similar. By specifying "aggregator /usr/bin/tac /bin/cat", you can run /usr/bin/tac in the domain for /bin/cat . For example, /usr/sbin/logrotate for Fedora Core 3 generates programs like /tmp/logrotate.\?\?\?\?\?\? and run them, but TOMOYO Linux doesn't allow using patterns for granting execute permission and defining domains. By specifying "aggregator /tmp/logrotate.\?\?\?\?\?\? /tmp/logrotate.tmp", you can run /tmp/logrotate.\?\?\?\?\?\? as if /tmp/logrotate.tmp is running. ** /sys/kernel/security/tomoyo/domain_policy ** This file contains definition of all domains and permissions that are granted to each domain. Lines from the next line to a domain definition ( any lines starting with "") to the previous line to the next domain definitions are interpreted as access permissions for that domain. ** /sys/kernel/security/tomoyo/meminfo ** This file is to show the total RAM used to keep policy in the kernel by TOMOYO Linux in bytes. (Example) [root@tomoyo]# cat /sys/kernel/security/tomoyo/meminfo Shared: 61440 Private: 69632 Dynamic: 768 Total: 131840 You can set memory quota by writing to this file. (Example) [root@tomoyo]# echo Shared: 2097152 > /sys/kernel/security/tomoyo/meminfo [root@tomoyo]# echo Private: 2097152 > /sys/kernel/security/tomoyo/meminfo ** /sys/kernel/security/tomoyo/self_domain ** This file is to show the name of domain the caller process belongs to. (Example) [root@etch]# cat /sys/kernel/security/tomoyo/self_domain /usr/sbin/sshd /bin/zsh /bin/cat ** /sys/kernel/security/tomoyo/version ** This file is used for getting TOMOYO Linux's version. (Example) [root@etch]# cat /sys/kernel/security/tomoyo/version 2.2.0-pre ** /sys/kernel/security/tomoyo/.domain_status ** This is a view (of a DBMS) that contains only profile number and domainnames of domain so that "ccs-setprofile" command can do line-oriented processing easily. ** /sys/kernel/security/tomoyo/.process_status ** This file is used by "ccs-ccstree" command to show "list of processes currently running" and "domains which each process belongs to" and "profile number which the domain is currently assigned" like "pstree" command. This file is writable by programs that aren't registered as policy manager. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/common.c | 2202 ++++++++++++++++++++++++++++++++++++++++++++++ security/tomoyo/common.h | 359 ++++++++ 2 files changed, 2561 insertions(+) create mode 100644 security/tomoyo/common.c create mode 100644 security/tomoyo/common.h diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c new file mode 100644 index 000000000000..8bedfb1992e5 --- /dev/null +++ b/security/tomoyo/common.c @@ -0,0 +1,2202 @@ +/* + * security/tomoyo/common.c + * + * Common functions for TOMOYO. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#include +#include +#include +#include "realpath.h" +#include "common.h" +#include "tomoyo.h" + +/* Has loading policy done? */ +bool tomoyo_policy_loaded; + +/* String table for functionality that takes 4 modes. */ +static const char *tomoyo_mode_4[4] = { + "disabled", "learning", "permissive", "enforcing" +}; +/* String table for functionality that takes 2 modes. */ +static const char *tomoyo_mode_2[4] = { + "disabled", "enabled", "enabled", "enabled" +}; + +/* Table for profile. */ +static struct { + const char *keyword; + unsigned int current_value; + const unsigned int max_value; +} tomoyo_control_array[TOMOYO_MAX_CONTROL_INDEX] = { + [TOMOYO_MAC_FOR_FILE] = { "MAC_FOR_FILE", 0, 3 }, + [TOMOYO_MAX_ACCEPT_ENTRY] = { "MAX_ACCEPT_ENTRY", 2048, INT_MAX }, + [TOMOYO_VERBOSE] = { "TOMOYO_VERBOSE", 1, 1 }, +}; + +/* Profile table. Memory is allocated as needed. */ +static struct tomoyo_profile { + unsigned int value[TOMOYO_MAX_CONTROL_INDEX]; + const struct tomoyo_path_info *comment; +} *tomoyo_profile_ptr[TOMOYO_MAX_PROFILES]; + +/* Permit policy management by non-root user? */ +static bool tomoyo_manage_by_non_root; + +/* Utility functions. */ + +/* Open operation for /sys/kernel/security/tomoyo/ interface. */ +static int tomoyo_open_control(const u8 type, struct file *file); +/* Close /sys/kernel/security/tomoyo/ interface. */ +static int tomoyo_close_control(struct file *file); +/* Read operation for /sys/kernel/security/tomoyo/ interface. */ +static int tomoyo_read_control(struct file *file, char __user *buffer, + const int buffer_len); +/* Write operation for /sys/kernel/security/tomoyo/ interface. */ +static int tomoyo_write_control(struct file *file, const char __user *buffer, + const int buffer_len); + +/** + * tomoyo_is_byte_range - Check whether the string isa \ooo style octal value. + * + * @str: Pointer to the string. + * + * Returns true if @str is a \ooo style octal value, false otherwise. + * + * TOMOYO uses \ooo style representation for 0x01 - 0x20 and 0x7F - 0xFF. + * This function verifies that \ooo is in valid range. + */ +static inline bool tomoyo_is_byte_range(const char *str) +{ + return *str >= '0' && *str++ <= '3' && + *str >= '0' && *str++ <= '7' && + *str >= '0' && *str <= '7'; +} + +/** + * tomoyo_is_alphabet_char - Check whether the character is an alphabet. + * + * @c: The character to check. + * + * Returns true if @c is an alphabet character, false otherwise. + */ +static inline bool tomoyo_is_alphabet_char(const char c) +{ + return (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z'); +} + +/** + * tomoyo_make_byte - Make byte value from three octal characters. + * + * @c1: The first character. + * @c2: The second character. + * @c3: The third character. + * + * Returns byte value. + */ +static inline u8 tomoyo_make_byte(const u8 c1, const u8 c2, const u8 c3) +{ + return ((c1 - '0') << 6) + ((c2 - '0') << 3) + (c3 - '0'); +} + +/** + * tomoyo_str_starts - Check whether the given string starts with the given keyword. + * + * @src: Pointer to pointer to the string. + * @find: Pointer to the keyword. + * + * Returns true if @src starts with @find, false otherwise. + * + * The @src is updated to point the first character after the @find + * if @src starts with @find. + */ +static bool tomoyo_str_starts(char **src, const char *find) +{ + const int len = strlen(find); + char *tmp = *src; + + if (strncmp(tmp, find, len)) + return false; + tmp += len; + *src = tmp; + return true; +} + +/** + * tomoyo_normalize_line - Format string. + * + * @buffer: The line to normalize. + * + * Leading and trailing whitespaces are removed. + * Multiple whitespaces are packed into single space. + * + * Returns nothing. + */ +static void tomoyo_normalize_line(unsigned char *buffer) +{ + unsigned char *sp = buffer; + unsigned char *dp = buffer; + bool first = true; + + while (tomoyo_is_invalid(*sp)) + sp++; + while (*sp) { + if (!first) + *dp++ = ' '; + first = false; + while (tomoyo_is_valid(*sp)) + *dp++ = *sp++; + while (tomoyo_is_invalid(*sp)) + sp++; + } + *dp = '\0'; +} + +/** + * tomoyo_is_correct_path - Validate a pathname. + * @filename: The pathname to check. + * @start_type: Should the pathname start with '/'? + * 1 = must / -1 = must not / 0 = don't care + * @pattern_type: Can the pathname contain a wildcard? + * 1 = must / -1 = must not / 0 = don't care + * @end_type: Should the pathname end with '/'? + * 1 = must / -1 = must not / 0 = don't care + * @function: The name of function calling me. + * + * Check whether the given filename follows the naming rules. + * Returns true if @filename follows the naming rules, false otherwise. + */ +bool tomoyo_is_correct_path(const char *filename, const s8 start_type, + const s8 pattern_type, const s8 end_type, + const char *function) +{ + bool contains_pattern = false; + unsigned char c; + unsigned char d; + unsigned char e; + const char *original_filename = filename; + + if (!filename) + goto out; + c = *filename; + if (start_type == 1) { /* Must start with '/' */ + if (c != '/') + goto out; + } else if (start_type == -1) { /* Must not start with '/' */ + if (c == '/') + goto out; + } + if (c) + c = *(filename + strlen(filename) - 1); + if (end_type == 1) { /* Must end with '/' */ + if (c != '/') + goto out; + } else if (end_type == -1) { /* Must not end with '/' */ + if (c == '/') + goto out; + } + while ((c = *filename++) != '\0') { + if (c == '\\') { + switch ((c = *filename++)) { + case '\\': /* "\\" */ + continue; + case '$': /* "\$" */ + case '+': /* "\+" */ + case '?': /* "\?" */ + case '*': /* "\*" */ + case '@': /* "\@" */ + case 'x': /* "\x" */ + case 'X': /* "\X" */ + case 'a': /* "\a" */ + case 'A': /* "\A" */ + case '-': /* "\-" */ + if (pattern_type == -1) + break; /* Must not contain pattern */ + contains_pattern = true; + continue; + case '0': /* "\ooo" */ + case '1': + case '2': + case '3': + d = *filename++; + if (d < '0' || d > '7') + break; + e = *filename++; + if (e < '0' || e > '7') + break; + c = tomoyo_make_byte(c, d, e); + if (tomoyo_is_invalid(c)) + continue; /* pattern is not \000 */ + } + goto out; + } else if (tomoyo_is_invalid(c)) { + goto out; + } + } + if (pattern_type == 1) { /* Must contain pattern */ + if (!contains_pattern) + goto out; + } + return true; + out: + printk(KERN_DEBUG "%s: Invalid pathname '%s'\n", function, + original_filename); + return false; +} + +/** + * tomoyo_is_correct_domain - Check whether the given domainname follows the naming rules. + * @domainname: The domainname to check. + * @function: The name of function calling me. + * + * Returns true if @domainname follows the naming rules, false otherwise. + */ +bool tomoyo_is_correct_domain(const unsigned char *domainname, + const char *function) +{ + unsigned char c; + unsigned char d; + unsigned char e; + const char *org_domainname = domainname; + + if (!domainname || strncmp(domainname, TOMOYO_ROOT_NAME, + TOMOYO_ROOT_NAME_LEN)) + goto out; + domainname += TOMOYO_ROOT_NAME_LEN; + if (!*domainname) + return true; + do { + if (*domainname++ != ' ') + goto out; + if (*domainname++ != '/') + goto out; + while ((c = *domainname) != '\0' && c != ' ') { + domainname++; + if (c == '\\') { + c = *domainname++; + switch ((c)) { + case '\\': /* "\\" */ + continue; + case '0': /* "\ooo" */ + case '1': + case '2': + case '3': + d = *domainname++; + if (d < '0' || d > '7') + break; + e = *domainname++; + if (e < '0' || e > '7') + break; + c = tomoyo_make_byte(c, d, e); + if (tomoyo_is_invalid(c)) + /* pattern is not \000 */ + continue; + } + goto out; + } else if (tomoyo_is_invalid(c)) { + goto out; + } + } + } while (*domainname); + return true; + out: + printk(KERN_DEBUG "%s: Invalid domainname '%s'\n", function, + org_domainname); + return false; +} + +/** + * tomoyo_is_domain_def - Check whether the given token can be a domainname. + * + * @buffer: The token to check. + * + * Returns true if @buffer possibly be a domainname, false otherwise. + */ +bool tomoyo_is_domain_def(const unsigned char *buffer) +{ + return !strncmp(buffer, TOMOYO_ROOT_NAME, TOMOYO_ROOT_NAME_LEN); +} + +/** + * tomoyo_find_domain - Find a domain by the given name. + * + * @domainname: The domainname to find. + * + * Caller must call down_read(&tomoyo_domain_list_lock); or + * down_write(&tomoyo_domain_list_lock); . + * + * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise. + */ +struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname) +{ + struct tomoyo_domain_info *domain; + struct tomoyo_path_info name; + + name.name = domainname; + tomoyo_fill_path_info(&name); + list_for_each_entry(domain, &tomoyo_domain_list, list) { + if (!domain->is_deleted && + !tomoyo_pathcmp(&name, domain->domainname)) + return domain; + } + return NULL; +} + +/** + * tomoyo_path_depth - Evaluate the number of '/' in a string. + * + * @pathname: The string to evaluate. + * + * Returns path depth of the string. + * + * I score 2 for each of the '/' in the @pathname + * and score 1 if the @pathname ends with '/'. + */ +static int tomoyo_path_depth(const char *pathname) +{ + int i = 0; + + if (pathname) { + const char *ep = pathname + strlen(pathname); + if (pathname < ep--) { + if (*ep != '/') + i++; + while (pathname <= ep) + if (*ep-- == '/') + i += 2; + } + } + return i; +} + +/** + * tomoyo_const_part_length - Evaluate the initial length without a pattern in a token. + * + * @filename: The string to evaluate. + * + * Returns the initial length without a pattern in @filename. + */ +static int tomoyo_const_part_length(const char *filename) +{ + char c; + int len = 0; + + if (!filename) + return 0; + while ((c = *filename++) != '\0') { + if (c != '\\') { + len++; + continue; + } + c = *filename++; + switch (c) { + case '\\': /* "\\" */ + len += 2; + continue; + case '0': /* "\ooo" */ + case '1': + case '2': + case '3': + c = *filename++; + if (c < '0' || c > '7') + break; + c = *filename++; + if (c < '0' || c > '7') + break; + len += 4; + continue; + } + break; + } + return len; +} + +/** + * tomoyo_fill_path_info - Fill in "struct tomoyo_path_info" members. + * + * @ptr: Pointer to "struct tomoyo_path_info" to fill in. + * + * The caller sets "struct tomoyo_path_info"->name. + */ +void tomoyo_fill_path_info(struct tomoyo_path_info *ptr) +{ + const char *name = ptr->name; + const int len = strlen(name); + + ptr->total_len = len; + ptr->const_len = tomoyo_const_part_length(name); + ptr->is_dir = len && (name[len - 1] == '/'); + ptr->is_patterned = (ptr->const_len < len); + ptr->hash = full_name_hash(name, len); + ptr->depth = tomoyo_path_depth(name); +} + +/** + * tomoyo_file_matches_to_pattern2 - Pattern matching without '/' character + * and "\-" pattern. + * + * @filename: The start of string to check. + * @filename_end: The end of string to check. + * @pattern: The start of pattern to compare. + * @pattern_end: The end of pattern to compare. + * + * Returns true if @filename matches @pattern, false otherwise. + */ +static bool tomoyo_file_matches_to_pattern2(const char *filename, + const char *filename_end, + const char *pattern, + const char *pattern_end) +{ + while (filename < filename_end && pattern < pattern_end) { + char c; + if (*pattern != '\\') { + if (*filename++ != *pattern++) + return false; + continue; + } + c = *filename; + pattern++; + switch (*pattern) { + int i; + int j; + case '?': + if (c == '/') { + return false; + } else if (c == '\\') { + if (filename[1] == '\\') + filename++; + else if (tomoyo_is_byte_range(filename + 1)) + filename += 3; + else + return false; + } + break; + case '\\': + if (c != '\\') + return false; + if (*++filename != '\\') + return false; + break; + case '+': + if (!isdigit(c)) + return false; + break; + case 'x': + if (!isxdigit(c)) + return false; + break; + case 'a': + if (!tomoyo_is_alphabet_char(c)) + return false; + break; + case '0': + case '1': + case '2': + case '3': + if (c == '\\' && tomoyo_is_byte_range(filename + 1) + && strncmp(filename + 1, pattern, 3) == 0) { + filename += 3; + pattern += 2; + break; + } + return false; /* Not matched. */ + case '*': + case '@': + for (i = 0; i <= filename_end - filename; i++) { + if (tomoyo_file_matches_to_pattern2( + filename + i, filename_end, + pattern + 1, pattern_end)) + return true; + c = filename[i]; + if (c == '.' && *pattern == '@') + break; + if (c != '\\') + continue; + if (filename[i + 1] == '\\') + i++; + else if (tomoyo_is_byte_range(filename + i + 1)) + i += 3; + else + break; /* Bad pattern. */ + } + return false; /* Not matched. */ + default: + j = 0; + c = *pattern; + if (c == '$') { + while (isdigit(filename[j])) + j++; + } else if (c == 'X') { + while (isxdigit(filename[j])) + j++; + } else if (c == 'A') { + while (tomoyo_is_alphabet_char(filename[j])) + j++; + } + for (i = 1; i <= j; i++) { + if (tomoyo_file_matches_to_pattern2( + filename + i, filename_end, + pattern + 1, pattern_end)) + return true; + } + return false; /* Not matched or bad pattern. */ + } + filename++; + pattern++; + } + while (*pattern == '\\' && + (*(pattern + 1) == '*' || *(pattern + 1) == '@')) + pattern += 2; + return filename == filename_end && pattern == pattern_end; +} + +/** + * tomoyo_file_matches_to_pattern - Pattern matching without without '/' character. + * + * @filename: The start of string to check. + * @filename_end: The end of string to check. + * @pattern: The start of pattern to compare. + * @pattern_end: The end of pattern to compare. + * + * Returns true if @filename matches @pattern, false otherwise. + */ +static bool tomoyo_file_matches_to_pattern(const char *filename, + const char *filename_end, + const char *pattern, + const char *pattern_end) +{ + const char *pattern_start = pattern; + bool first = true; + bool result; + + while (pattern < pattern_end - 1) { + /* Split at "\-" pattern. */ + if (*pattern++ != '\\' || *pattern++ != '-') + continue; + result = tomoyo_file_matches_to_pattern2(filename, + filename_end, + pattern_start, + pattern - 2); + if (first) + result = !result; + if (result) + return false; + first = false; + pattern_start = pattern; + } + result = tomoyo_file_matches_to_pattern2(filename, filename_end, + pattern_start, pattern_end); + return first ? result : !result; +} + +/** + * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern. + * @filename: The filename to check. + * @pattern: The pattern to compare. + * + * Returns true if matches, false otherwise. + * + * The following patterns are available. + * \\ \ itself. + * \ooo Octal representation of a byte. + * \* More than or equals to 0 character other than '/'. + * \@ More than or equals to 0 character other than '/' or '.'. + * \? 1 byte character other than '/'. + * \$ More than or equals to 1 decimal digit. + * \+ 1 decimal digit. + * \X More than or equals to 1 hexadecimal digit. + * \x 1 hexadecimal digit. + * \A More than or equals to 1 alphabet character. + * \a 1 alphabet character. + * \- Subtraction operator. + */ +bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename, + const struct tomoyo_path_info *pattern) +{ + /* + if (!filename || !pattern) + return false; + */ + const char *f = filename->name; + const char *p = pattern->name; + const int len = pattern->const_len; + + /* If @pattern doesn't contain pattern, I can use strcmp(). */ + if (!pattern->is_patterned) + return !tomoyo_pathcmp(filename, pattern); + /* Dont compare if the number of '/' differs. */ + if (filename->depth != pattern->depth) + return false; + /* Compare the initial length without patterns. */ + if (strncmp(f, p, len)) + return false; + f += len; + p += len; + /* Main loop. Compare each directory component. */ + while (*f && *p) { + const char *f_delimiter = strchr(f, '/'); + const char *p_delimiter = strchr(p, '/'); + if (!f_delimiter) + f_delimiter = f + strlen(f); + if (!p_delimiter) + p_delimiter = p + strlen(p); + if (!tomoyo_file_matches_to_pattern(f, f_delimiter, + p, p_delimiter)) + return false; + f = f_delimiter; + if (*f) + f++; + p = p_delimiter; + if (*p) + p++; + } + /* Ignore trailing "\*" and "\@" in @pattern. */ + while (*p == '\\' && + (*(p + 1) == '*' || *(p + 1) == '@')) + p += 2; + return !*f && !*p; +} + +/** + * tomoyo_io_printf - Transactional printf() to "struct tomoyo_io_buffer" structure. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * @fmt: The printf()'s format string, followed by parameters. + * + * Returns true if output was written, false otherwise. + * + * The snprintf() will truncate, but tomoyo_io_printf() won't. + */ +bool tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...) +{ + va_list args; + int len; + int pos = head->read_avail; + int size = head->readbuf_size - pos; + + if (size <= 0) + return false; + va_start(args, fmt); + len = vsnprintf(head->read_buf + pos, size, fmt, args); + va_end(args); + if (pos + len >= head->readbuf_size) + return false; + head->read_avail += len; + return true; +} + +/** + * tomoyo_get_exe - Get tomoyo_realpath() of current process. + * + * Returns the tomoyo_realpath() of current process on success, NULL otherwise. + * + * This function uses tomoyo_alloc(), so the caller must call tomoyo_free() + * if this function didn't return NULL. + */ +static const char *tomoyo_get_exe(void) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + const char *cp = NULL; + + if (!mm) + return NULL; + down_read(&mm->mmap_sem); + for (vma = mm->mmap; vma; vma = vma->vm_next) { + if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file) { + cp = tomoyo_realpath_from_path(&vma->vm_file->f_path); + break; + } + } + up_read(&mm->mmap_sem); + return cp; +} + +/** + * tomoyo_get_msg - Get warning message. + * + * @is_enforce: Is it enforcing mode? + * + * Returns "ERROR" or "WARNING". + */ +const char *tomoyo_get_msg(const bool is_enforce) +{ + if (is_enforce) + return "ERROR"; + else + return "WARNING"; +} + +/** + * tomoyo_check_flags - Check mode for specified functionality. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @index: The functionality to check mode. + * + * TOMOYO checks only process context. + * This code disables TOMOYO's enforcement in case the function is called from + * interrupt context. + */ +unsigned int tomoyo_check_flags(const struct tomoyo_domain_info *domain, + const u8 index) +{ + const u8 profile = domain->profile; + + if (WARN_ON(in_interrupt())) + return 0; + return tomoyo_policy_loaded && index < TOMOYO_MAX_CONTROL_INDEX +#if TOMOYO_MAX_PROFILES != 256 + && profile < TOMOYO_MAX_PROFILES +#endif + && tomoyo_profile_ptr[profile] ? + tomoyo_profile_ptr[profile]->value[index] : 0; +} + +/** + * tomoyo_verbose_mode - Check whether TOMOYO is verbose mode. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * + * Returns true if domain policy violation warning should be printed to + * console. + */ +bool tomoyo_verbose_mode(const struct tomoyo_domain_info *domain) +{ + return tomoyo_check_flags(domain, TOMOYO_VERBOSE) != 0; +} + +/** + * tomoyo_domain_quota_is_ok - Check for domain's quota. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * + * Returns true if the domain is not exceeded quota, false otherwise. + */ +bool tomoyo_domain_quota_is_ok(struct tomoyo_domain_info * const domain) +{ + unsigned int count = 0; + struct tomoyo_acl_info *ptr; + + if (!domain) + return true; + down_read(&tomoyo_domain_acl_info_list_lock); + list_for_each_entry(ptr, &domain->acl_info_list, list) { + if (ptr->type & TOMOYO_ACL_DELETED) + continue; + switch (tomoyo_acl_type2(ptr)) { + struct tomoyo_single_path_acl_record *acl1; + struct tomoyo_double_path_acl_record *acl2; + u16 perm; + case TOMOYO_TYPE_SINGLE_PATH_ACL: + acl1 = container_of(ptr, + struct tomoyo_single_path_acl_record, + head); + perm = acl1->perm; + if (perm & (1 << TOMOYO_TYPE_EXECUTE_ACL)) + count++; + if (perm & + ((1 << TOMOYO_TYPE_READ_ACL) | + (1 << TOMOYO_TYPE_WRITE_ACL))) + count++; + if (perm & (1 << TOMOYO_TYPE_CREATE_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_UNLINK_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_MKDIR_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_RMDIR_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_MKFIFO_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_MKSOCK_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_MKBLOCK_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_MKCHAR_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_TRUNCATE_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_SYMLINK_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_REWRITE_ACL)) + count++; + break; + case TOMOYO_TYPE_DOUBLE_PATH_ACL: + acl2 = container_of(ptr, + struct tomoyo_double_path_acl_record, + head); + perm = acl2->perm; + if (perm & (1 << TOMOYO_TYPE_LINK_ACL)) + count++; + if (perm & (1 << TOMOYO_TYPE_RENAME_ACL)) + count++; + break; + } + } + up_read(&tomoyo_domain_acl_info_list_lock); + if (count < tomoyo_check_flags(domain, TOMOYO_MAX_ACCEPT_ENTRY)) + return true; + if (!domain->quota_warned) { + domain->quota_warned = true; + printk(KERN_WARNING "TOMOYO-WARNING: " + "Domain '%s' has so many ACLs to hold. " + "Stopped learning mode.\n", domain->domainname->name); + } + return false; +} + +/** + * tomoyo_find_or_assign_new_profile - Create a new profile. + * + * @profile: Profile number to create. + * + * Returns pointer to "struct tomoyo_profile" on success, NULL otherwise. + */ +static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned + int profile) +{ + static DEFINE_MUTEX(lock); + struct tomoyo_profile *ptr = NULL; + int i; + + if (profile >= TOMOYO_MAX_PROFILES) + return NULL; + /***** EXCLUSIVE SECTION START *****/ + mutex_lock(&lock); + ptr = tomoyo_profile_ptr[profile]; + if (ptr) + goto ok; + ptr = tomoyo_alloc_element(sizeof(*ptr)); + if (!ptr) + goto ok; + for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++) + ptr->value[i] = tomoyo_control_array[i].current_value; + mb(); /* Avoid out-of-order execution. */ + tomoyo_profile_ptr[profile] = ptr; + ok: + mutex_unlock(&lock); + /***** EXCLUSIVE SECTION END *****/ + return ptr; +} + +/** + * tomoyo_write_profile - Write to profile table. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_write_profile(struct tomoyo_io_buffer *head) +{ + char *data = head->write_buf; + unsigned int i; + unsigned int value; + char *cp; + struct tomoyo_profile *profile; + unsigned long num; + + cp = strchr(data, '-'); + if (cp) + *cp = '\0'; + if (strict_strtoul(data, 10, &num)) + return -EINVAL; + if (cp) + data = cp + 1; + profile = tomoyo_find_or_assign_new_profile(num); + if (!profile) + return -EINVAL; + cp = strchr(data, '='); + if (!cp) + return -EINVAL; + *cp = '\0'; + if (!strcmp(data, "COMMENT")) { + profile->comment = tomoyo_save_name(cp + 1); + return 0; + } + for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++) { + if (strcmp(data, tomoyo_control_array[i].keyword)) + continue; + if (sscanf(cp + 1, "%u", &value) != 1) { + int j; + const char **modes; + switch (i) { + case TOMOYO_VERBOSE: + modes = tomoyo_mode_2; + break; + default: + modes = tomoyo_mode_4; + break; + } + for (j = 0; j < 4; j++) { + if (strcmp(cp + 1, modes[j])) + continue; + value = j; + break; + } + if (j == 4) + return -EINVAL; + } else if (value > tomoyo_control_array[i].max_value) { + value = tomoyo_control_array[i].max_value; + } + profile->value[i] = value; + return 0; + } + return -EINVAL; +} + +/** + * tomoyo_read_profile - Read from profile table. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0. + */ +static int tomoyo_read_profile(struct tomoyo_io_buffer *head) +{ + static const int total = TOMOYO_MAX_CONTROL_INDEX + 1; + int step; + + if (head->read_eof) + return 0; + for (step = head->read_step; step < TOMOYO_MAX_PROFILES * total; + step++) { + const u8 index = step / total; + u8 type = step % total; + const struct tomoyo_profile *profile + = tomoyo_profile_ptr[index]; + head->read_step = step; + if (!profile) + continue; + if (!type) { /* Print profile' comment tag. */ + if (!tomoyo_io_printf(head, "%u-COMMENT=%s\n", + index, profile->comment ? + profile->comment->name : "")) + break; + continue; + } + type--; + if (type < TOMOYO_MAX_CONTROL_INDEX) { + const unsigned int value = profile->value[type]; + const char **modes = NULL; + const char *keyword + = tomoyo_control_array[type].keyword; + switch (tomoyo_control_array[type].max_value) { + case 3: + modes = tomoyo_mode_4; + break; + case 1: + modes = tomoyo_mode_2; + break; + } + if (modes) { + if (!tomoyo_io_printf(head, "%u-%s=%s\n", index, + keyword, modes[value])) + break; + } else { + if (!tomoyo_io_printf(head, "%u-%s=%u\n", index, + keyword, value)) + break; + } + } + } + if (step == TOMOYO_MAX_PROFILES * total) + head->read_eof = true; + return 0; +} + +/* Structure for policy manager. */ +struct tomoyo_policy_manager_entry { + struct list_head list; + /* A path to program or a domainname. */ + const struct tomoyo_path_info *manager; + bool is_domain; /* True if manager is a domainname. */ + bool is_deleted; /* True if this entry is deleted. */ +}; + +/* The list for "struct tomoyo_policy_manager_entry". */ +static LIST_HEAD(tomoyo_policy_manager_list); +static DECLARE_RWSEM(tomoyo_policy_manager_list_lock); + +/** + * tomoyo_update_manager_entry - Add a manager entry. + * + * @manager: The path to manager or the domainnamme. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_manager_entry(const char *manager, + const bool is_delete) +{ + struct tomoyo_policy_manager_entry *new_entry; + struct tomoyo_policy_manager_entry *ptr; + const struct tomoyo_path_info *saved_manager; + int error = -ENOMEM; + bool is_domain = false; + + if (tomoyo_is_domain_def(manager)) { + if (!tomoyo_is_correct_domain(manager, __func__)) + return -EINVAL; + is_domain = true; + } else { + if (!tomoyo_is_correct_path(manager, 1, -1, -1, __func__)) + return -EINVAL; + } + saved_manager = tomoyo_save_name(manager); + if (!saved_manager) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_policy_manager_list_lock); + list_for_each_entry(ptr, &tomoyo_policy_manager_list, list) { + if (ptr->manager != saved_manager) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->manager = saved_manager; + new_entry->is_domain = is_domain; + list_add_tail(&new_entry->list, &tomoyo_policy_manager_list); + error = 0; + out: + up_write(&tomoyo_policy_manager_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_write_manager_policy - Write manager policy. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_write_manager_policy(struct tomoyo_io_buffer *head) +{ + char *data = head->write_buf; + bool is_delete = tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE); + + if (!strcmp(data, "manage_by_non_root")) { + tomoyo_manage_by_non_root = !is_delete; + return 0; + } + return tomoyo_update_manager_entry(data, is_delete); +} + +/** + * tomoyo_read_manager_policy - Read manager policy. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0. + */ +static int tomoyo_read_manager_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + if (head->read_eof) + return 0; + down_read(&tomoyo_policy_manager_list_lock); + list_for_each_cookie(pos, head->read_var2, + &tomoyo_policy_manager_list) { + struct tomoyo_policy_manager_entry *ptr; + ptr = list_entry(pos, struct tomoyo_policy_manager_entry, + list); + if (ptr->is_deleted) + continue; + if (!tomoyo_io_printf(head, "%s\n", ptr->manager->name)) { + done = false; + break; + } + } + up_read(&tomoyo_policy_manager_list_lock); + head->read_eof = done; + return 0; +} + +/** + * tomoyo_is_policy_manager - Check whether the current process is a policy manager. + * + * Returns true if the current process is permitted to modify policy + * via /sys/kernel/security/tomoyo/ interface. + */ +static bool tomoyo_is_policy_manager(void) +{ + struct tomoyo_policy_manager_entry *ptr; + const char *exe; + const struct task_struct *task = current; + const struct tomoyo_path_info *domainname = tomoyo_domain()->domainname; + bool found = false; + + if (!tomoyo_policy_loaded) + return true; + if (!tomoyo_manage_by_non_root && (task->cred->uid || task->cred->euid)) + return false; + down_read(&tomoyo_policy_manager_list_lock); + list_for_each_entry(ptr, &tomoyo_policy_manager_list, list) { + if (!ptr->is_deleted && ptr->is_domain + && !tomoyo_pathcmp(domainname, ptr->manager)) { + found = true; + break; + } + } + up_read(&tomoyo_policy_manager_list_lock); + if (found) + return true; + exe = tomoyo_get_exe(); + if (!exe) + return false; + down_read(&tomoyo_policy_manager_list_lock); + list_for_each_entry(ptr, &tomoyo_policy_manager_list, list) { + if (!ptr->is_deleted && !ptr->is_domain + && !strcmp(exe, ptr->manager->name)) { + found = true; + break; + } + } + up_read(&tomoyo_policy_manager_list_lock); + if (!found) { /* Reduce error messages. */ + static pid_t last_pid; + const pid_t pid = current->pid; + if (last_pid != pid) { + printk(KERN_WARNING "%s ( %s ) is not permitted to " + "update policies.\n", domainname->name, exe); + last_pid = pid; + } + } + tomoyo_free(exe); + return found; +} + +/** + * tomoyo_is_select_one - Parse select command. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * @data: String to parse. + * + * Returns true on success, false otherwise. + */ +static bool tomoyo_is_select_one(struct tomoyo_io_buffer *head, + const char *data) +{ + unsigned int pid; + struct tomoyo_domain_info *domain = NULL; + + if (sscanf(data, "pid=%u", &pid) == 1) { + struct task_struct *p; + /***** CRITICAL SECTION START *****/ + read_lock(&tasklist_lock); + p = find_task_by_vpid(pid); + if (p) + domain = tomoyo_real_domain(p); + read_unlock(&tasklist_lock); + /***** CRITICAL SECTION END *****/ + } else if (!strncmp(data, "domain=", 7)) { + if (tomoyo_is_domain_def(data + 7)) { + down_read(&tomoyo_domain_list_lock); + domain = tomoyo_find_domain(data + 7); + up_read(&tomoyo_domain_list_lock); + } + } else + return false; + head->write_var1 = domain; + /* Accessing read_buf is safe because head->io_sem is held. */ + if (!head->read_buf) + return true; /* Do nothing if open(O_WRONLY). */ + head->read_avail = 0; + tomoyo_io_printf(head, "# select %s\n", data); + head->read_single_domain = true; + head->read_eof = !domain; + if (domain) { + struct tomoyo_domain_info *d; + head->read_var1 = NULL; + down_read(&tomoyo_domain_list_lock); + list_for_each_entry(d, &tomoyo_domain_list, list) { + if (d == domain) + break; + head->read_var1 = &d->list; + } + up_read(&tomoyo_domain_list_lock); + head->read_var2 = NULL; + head->read_bit = 0; + head->read_step = 0; + if (domain->is_deleted) + tomoyo_io_printf(head, "# This is a deleted domain.\n"); + } + return true; +} + +/** + * tomoyo_write_domain_policy - Write domain policy. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_write_domain_policy(struct tomoyo_io_buffer *head) +{ + char *data = head->write_buf; + struct tomoyo_domain_info *domain = head->write_var1; + bool is_delete = false; + bool is_select = false; + bool is_undelete = false; + unsigned int profile; + + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE)) + is_delete = true; + else if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_SELECT)) + is_select = true; + else if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_UNDELETE)) + is_undelete = true; + if (is_select && tomoyo_is_select_one(head, data)) + return 0; + /* Don't allow updating policies by non manager programs. */ + if (!tomoyo_is_policy_manager()) + return -EPERM; + if (tomoyo_is_domain_def(data)) { + domain = NULL; + if (is_delete) + tomoyo_delete_domain(data); + else if (is_select) { + down_read(&tomoyo_domain_list_lock); + domain = tomoyo_find_domain(data); + up_read(&tomoyo_domain_list_lock); + } else if (is_undelete) + domain = tomoyo_undelete_domain(data); + else + domain = tomoyo_find_or_assign_new_domain(data, 0); + head->write_var1 = domain; + return 0; + } + if (!domain) + return -EINVAL; + + if (sscanf(data, TOMOYO_KEYWORD_USE_PROFILE "%u", &profile) == 1 + && profile < TOMOYO_MAX_PROFILES) { + if (tomoyo_profile_ptr[profile] || !tomoyo_policy_loaded) + domain->profile = (u8) profile; + return 0; + } + if (!strcmp(data, TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ)) { + tomoyo_set_domain_flag(domain, is_delete, + TOMOYO_DOMAIN_FLAGS_IGNORE_GLOBAL_ALLOW_READ); + return 0; + } + return tomoyo_write_file_policy(data, domain, is_delete); +} + +/** + * tomoyo_print_single_path_acl - Print a single path ACL entry. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * @ptr: Pointer to "struct tomoyo_single_path_acl_record". + * + * Returns true on success, false otherwise. + */ +static bool tomoyo_print_single_path_acl(struct tomoyo_io_buffer *head, + struct tomoyo_single_path_acl_record * + ptr) +{ + int pos; + u8 bit; + const char *atmark = ""; + const char *filename; + const u16 perm = ptr->perm; + + filename = ptr->filename->name; + for (bit = head->read_bit; bit < TOMOYO_MAX_SINGLE_PATH_OPERATION; + bit++) { + const char *msg; + if (!(perm & (1 << bit))) + continue; + /* Print "read/write" instead of "read" and "write". */ + if ((bit == TOMOYO_TYPE_READ_ACL || + bit == TOMOYO_TYPE_WRITE_ACL) + && (perm & (1 << TOMOYO_TYPE_READ_WRITE_ACL))) + continue; + msg = tomoyo_sp2keyword(bit); + pos = head->read_avail; + if (!tomoyo_io_printf(head, "allow_%s %s%s\n", msg, + atmark, filename)) + goto out; + } + head->read_bit = 0; + return true; + out: + head->read_bit = bit; + head->read_avail = pos; + return false; +} + +/** + * tomoyo_print_double_path_acl - Print a double path ACL entry. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * @ptr: Pointer to "struct tomoyo_double_path_acl_record". + * + * Returns true on success, false otherwise. + */ +static bool tomoyo_print_double_path_acl(struct tomoyo_io_buffer *head, + struct tomoyo_double_path_acl_record * + ptr) +{ + int pos; + const char *atmark1 = ""; + const char *atmark2 = ""; + const char *filename1; + const char *filename2; + const u8 perm = ptr->perm; + u8 bit; + + filename1 = ptr->filename1->name; + filename2 = ptr->filename2->name; + for (bit = head->read_bit; bit < TOMOYO_MAX_DOUBLE_PATH_OPERATION; + bit++) { + const char *msg; + if (!(perm & (1 << bit))) + continue; + msg = tomoyo_dp2keyword(bit); + pos = head->read_avail; + if (!tomoyo_io_printf(head, "allow_%s %s%s %s%s\n", msg, + atmark1, filename1, atmark2, filename2)) + goto out; + } + head->read_bit = 0; + return true; + out: + head->read_bit = bit; + head->read_avail = pos; + return false; +} + +/** + * tomoyo_print_entry - Print an ACL entry. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * @ptr: Pointer to an ACL entry. + * + * Returns true on success, false otherwise. + */ +static bool tomoyo_print_entry(struct tomoyo_io_buffer *head, + struct tomoyo_acl_info *ptr) +{ + const u8 acl_type = tomoyo_acl_type2(ptr); + + if (acl_type & TOMOYO_ACL_DELETED) + return true; + if (acl_type == TOMOYO_TYPE_SINGLE_PATH_ACL) { + struct tomoyo_single_path_acl_record *acl + = container_of(ptr, + struct tomoyo_single_path_acl_record, + head); + return tomoyo_print_single_path_acl(head, acl); + } + if (acl_type == TOMOYO_TYPE_DOUBLE_PATH_ACL) { + struct tomoyo_double_path_acl_record *acl + = container_of(ptr, + struct tomoyo_double_path_acl_record, + head); + return tomoyo_print_double_path_acl(head, acl); + } + BUG(); /* This must not happen. */ + return false; +} + +/** + * tomoyo_read_domain_policy - Read domain policy. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0. + */ +static int tomoyo_read_domain_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *dpos; + struct list_head *apos; + bool done = true; + + if (head->read_eof) + return 0; + if (head->read_step == 0) + head->read_step = 1; + down_read(&tomoyo_domain_list_lock); + list_for_each_cookie(dpos, head->read_var1, &tomoyo_domain_list) { + struct tomoyo_domain_info *domain; + const char *quota_exceeded = ""; + const char *transition_failed = ""; + const char *ignore_global_allow_read = ""; + domain = list_entry(dpos, struct tomoyo_domain_info, list); + if (head->read_step != 1) + goto acl_loop; + if (domain->is_deleted && !head->read_single_domain) + continue; + /* Print domainname and flags. */ + if (domain->quota_warned) + quota_exceeded = "quota_exceeded\n"; + if (domain->flags & TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED) + transition_failed = "transition_failed\n"; + if (domain->flags & + TOMOYO_DOMAIN_FLAGS_IGNORE_GLOBAL_ALLOW_READ) + ignore_global_allow_read + = TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ "\n"; + if (!tomoyo_io_printf(head, + "%s\n" TOMOYO_KEYWORD_USE_PROFILE "%u\n" + "%s%s%s\n", domain->domainname->name, + domain->profile, quota_exceeded, + transition_failed, + ignore_global_allow_read)) { + done = false; + break; + } + head->read_step = 2; +acl_loop: + if (head->read_step == 3) + goto tail_mark; + /* Print ACL entries in the domain. */ + down_read(&tomoyo_domain_acl_info_list_lock); + list_for_each_cookie(apos, head->read_var2, + &domain->acl_info_list) { + struct tomoyo_acl_info *ptr + = list_entry(apos, struct tomoyo_acl_info, + list); + if (!tomoyo_print_entry(head, ptr)) { + done = false; + break; + } + } + up_read(&tomoyo_domain_acl_info_list_lock); + if (!done) + break; + head->read_step = 3; +tail_mark: + if (!tomoyo_io_printf(head, "\n")) { + done = false; + break; + } + head->read_step = 1; + if (head->read_single_domain) + break; + } + up_read(&tomoyo_domain_list_lock); + head->read_eof = done; + return 0; +} + +/** + * tomoyo_write_domain_profile - Assign profile for specified domain. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0 on success, -EINVAL otherwise. + * + * This is equivalent to doing + * + * ( echo "select " $domainname; echo "use_profile " $profile ) | + * /usr/lib/ccs/loadpolicy -d + */ +static int tomoyo_write_domain_profile(struct tomoyo_io_buffer *head) +{ + char *data = head->write_buf; + char *cp = strchr(data, ' '); + struct tomoyo_domain_info *domain; + unsigned long profile; + + if (!cp) + return -EINVAL; + *cp = '\0'; + down_read(&tomoyo_domain_list_lock); + domain = tomoyo_find_domain(cp + 1); + up_read(&tomoyo_domain_list_lock); + if (strict_strtoul(data, 10, &profile)) + return -EINVAL; + if (domain && profile < TOMOYO_MAX_PROFILES + && (tomoyo_profile_ptr[profile] || !tomoyo_policy_loaded)) + domain->profile = (u8) profile; + return 0; +} + +/** + * tomoyo_read_domain_profile - Read only domainname and profile. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns list of profile number and domainname pairs. + * + * This is equivalent to doing + * + * grep -A 1 '^' /sys/kernel/security/tomoyo/domain_policy | + * awk ' { if ( domainname == "" ) { if ( $1 == "" ) + * domainname = $0; } else if ( $1 == "use_profile" ) { + * print $2 " " domainname; domainname = ""; } } ; ' + */ +static int tomoyo_read_domain_profile(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + if (head->read_eof) + return 0; + down_read(&tomoyo_domain_list_lock); + list_for_each_cookie(pos, head->read_var1, &tomoyo_domain_list) { + struct tomoyo_domain_info *domain; + domain = list_entry(pos, struct tomoyo_domain_info, list); + if (domain->is_deleted) + continue; + if (!tomoyo_io_printf(head, "%u %s\n", domain->profile, + domain->domainname->name)) { + done = false; + break; + } + } + up_read(&tomoyo_domain_list_lock); + head->read_eof = done; + return 0; +} + +/** + * tomoyo_write_pid: Specify PID to obtain domainname. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0. + */ +static int tomoyo_write_pid(struct tomoyo_io_buffer *head) +{ + unsigned long pid; + /* No error check. */ + strict_strtoul(head->write_buf, 10, &pid); + head->read_step = (int) pid; + head->read_eof = false; + return 0; +} + +/** + * tomoyo_read_pid - Get domainname of the specified PID. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns the domainname which the specified PID is in on success, + * empty string otherwise. + * The PID is specified by tomoyo_write_pid() so that the user can obtain + * using read()/write() interface rather than sysctl() interface. + */ +static int tomoyo_read_pid(struct tomoyo_io_buffer *head) +{ + if (head->read_avail == 0 && !head->read_eof) { + const int pid = head->read_step; + struct task_struct *p; + struct tomoyo_domain_info *domain = NULL; + /***** CRITICAL SECTION START *****/ + read_lock(&tasklist_lock); + p = find_task_by_vpid(pid); + if (p) + domain = tomoyo_real_domain(p); + read_unlock(&tasklist_lock); + /***** CRITICAL SECTION END *****/ + if (domain) + tomoyo_io_printf(head, "%d %u %s", pid, domain->profile, + domain->domainname->name); + head->read_eof = true; + } + return 0; +} + +/** + * tomoyo_write_exception_policy - Write exception policy. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_write_exception_policy(struct tomoyo_io_buffer *head) +{ + char *data = head->write_buf; + bool is_delete = tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE); + + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_KEEP_DOMAIN)) + return tomoyo_write_domain_keeper_policy(data, false, + is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_NO_KEEP_DOMAIN)) + return tomoyo_write_domain_keeper_policy(data, true, is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_INITIALIZE_DOMAIN)) + return tomoyo_write_domain_initializer_policy(data, false, + is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN)) + return tomoyo_write_domain_initializer_policy(data, true, + is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALIAS)) + return tomoyo_write_alias_policy(data, is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALLOW_READ)) + return tomoyo_write_globally_readable_policy(data, is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_FILE_PATTERN)) + return tomoyo_write_pattern_policy(data, is_delete); + if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_DENY_REWRITE)) + return tomoyo_write_no_rewrite_policy(data, is_delete); + return -EINVAL; +} + +/** + * tomoyo_read_exception_policy - Read exception policy. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns 0 on success, -EINVAL otherwise. + */ +static int tomoyo_read_exception_policy(struct tomoyo_io_buffer *head) +{ + if (!head->read_eof) { + switch (head->read_step) { + case 0: + head->read_var2 = NULL; + head->read_step = 1; + case 1: + if (!tomoyo_read_domain_keeper_policy(head)) + break; + head->read_var2 = NULL; + head->read_step = 2; + case 2: + if (!tomoyo_read_globally_readable_policy(head)) + break; + head->read_var2 = NULL; + head->read_step = 3; + case 3: + head->read_var2 = NULL; + head->read_step = 4; + case 4: + if (!tomoyo_read_domain_initializer_policy(head)) + break; + head->read_var2 = NULL; + head->read_step = 5; + case 5: + if (!tomoyo_read_alias_policy(head)) + break; + head->read_var2 = NULL; + head->read_step = 6; + case 6: + head->read_var2 = NULL; + head->read_step = 7; + case 7: + if (!tomoyo_read_file_pattern(head)) + break; + head->read_var2 = NULL; + head->read_step = 8; + case 8: + if (!tomoyo_read_no_rewrite_policy(head)) + break; + head->read_var2 = NULL; + head->read_step = 9; + case 9: + head->read_eof = true; + break; + default: + return -EINVAL; + } + } + return 0; +} + +/* path to policy loader */ +static const char *tomoyo_loader = "/sbin/tomoyo-init"; + +/** + * tomoyo_policy_loader_exists - Check whether /sbin/tomoyo-init exists. + * + * Returns true if /sbin/tomoyo-init exists, false otherwise. + */ +static bool tomoyo_policy_loader_exists(void) +{ + /* + * Don't activate MAC if the policy loader doesn't exist. + * If the initrd includes /sbin/init but real-root-dev has not + * mounted on / yet, activating MAC will block the system since + * policies are not loaded yet. + * Thus, let do_execve() call this function everytime. + */ + struct nameidata nd; + + if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) { + printk(KERN_INFO "Not activating Mandatory Access Control now " + "since %s doesn't exist.\n", tomoyo_loader); + return false; + } + path_put(&nd.path); + return true; +} + +/** + * tomoyo_load_policy - Run external policy loader to load policy. + * + * @filename: The program about to start. + * + * This function checks whether @filename is /sbin/init , and if so + * invoke /sbin/tomoyo-init and wait for the termination of /sbin/tomoyo-init + * and then continues invocation of /sbin/init. + * /sbin/tomoyo-init reads policy files in /etc/tomoyo/ directory and + * writes to /sys/kernel/security/tomoyo/ interfaces. + * + * Returns nothing. + */ +void tomoyo_load_policy(const char *filename) +{ + char *argv[2]; + char *envp[3]; + + if (tomoyo_policy_loaded) + return; + /* + * Check filename is /sbin/init or /sbin/tomoyo-start. + * /sbin/tomoyo-start is a dummy filename in case where /sbin/init can't + * be passed. + * You can create /sbin/tomoyo-start by + * "ln -s /bin/true /sbin/tomoyo-start". + */ + if (strcmp(filename, "/sbin/init") && + strcmp(filename, "/sbin/tomoyo-start")) + return; + if (!tomoyo_policy_loader_exists()) + return; + + printk(KERN_INFO "Calling %s to load policy. Please wait.\n", + tomoyo_loader); + argv[0] = (char *) tomoyo_loader; + argv[1] = NULL; + envp[0] = "HOME=/"; + envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; + envp[2] = NULL; + call_usermodehelper(argv[0], argv, envp, 1); + + printk(KERN_INFO "TOMOYO: 2.2.0-pre 2009/02/01\n"); + printk(KERN_INFO "Mandatory Access Control activated.\n"); + tomoyo_policy_loaded = true; + { /* Check all profiles currently assigned to domains are defined. */ + struct tomoyo_domain_info *domain; + down_read(&tomoyo_domain_list_lock); + list_for_each_entry(domain, &tomoyo_domain_list, list) { + const u8 profile = domain->profile; + if (tomoyo_profile_ptr[profile]) + continue; + panic("Profile %u (used by '%s') not defined.\n", + profile, domain->domainname->name); + } + up_read(&tomoyo_domain_list_lock); + } +} + +/** + * tomoyo_read_version: Get version. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns version information. + */ +static int tomoyo_read_version(struct tomoyo_io_buffer *head) +{ + if (!head->read_eof) { + tomoyo_io_printf(head, "2.2.0-pre"); + head->read_eof = true; + } + return 0; +} + +/** + * tomoyo_read_self_domain - Get the current process's domainname. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns the current process's domainname. + */ +static int tomoyo_read_self_domain(struct tomoyo_io_buffer *head) +{ + if (!head->read_eof) { + /* + * tomoyo_domain()->domainname != NULL + * because every process belongs to a domain and + * the domain's name cannot be NULL. + */ + tomoyo_io_printf(head, "%s", tomoyo_domain()->domainname->name); + head->read_eof = true; + } + return 0; +} + +/** + * tomoyo_open_control - open() for /sys/kernel/security/tomoyo/ interface. + * + * @type: Type of interface. + * @file: Pointer to "struct file". + * + * Associates policy handler and returns 0 on success, -ENOMEM otherwise. + */ +static int tomoyo_open_control(const u8 type, struct file *file) +{ + struct tomoyo_io_buffer *head = tomoyo_alloc(sizeof(*head)); + + if (!head) + return -ENOMEM; + mutex_init(&head->io_sem); + switch (type) { + case TOMOYO_DOMAINPOLICY: + /* /sys/kernel/security/tomoyo/domain_policy */ + head->write = tomoyo_write_domain_policy; + head->read = tomoyo_read_domain_policy; + break; + case TOMOYO_EXCEPTIONPOLICY: + /* /sys/kernel/security/tomoyo/exception_policy */ + head->write = tomoyo_write_exception_policy; + head->read = tomoyo_read_exception_policy; + break; + case TOMOYO_SELFDOMAIN: + /* /sys/kernel/security/tomoyo/self_domain */ + head->read = tomoyo_read_self_domain; + break; + case TOMOYO_DOMAIN_STATUS: + /* /sys/kernel/security/tomoyo/.domain_status */ + head->write = tomoyo_write_domain_profile; + head->read = tomoyo_read_domain_profile; + break; + case TOMOYO_PROCESS_STATUS: + /* /sys/kernel/security/tomoyo/.process_status */ + head->write = tomoyo_write_pid; + head->read = tomoyo_read_pid; + break; + case TOMOYO_VERSION: + /* /sys/kernel/security/tomoyo/version */ + head->read = tomoyo_read_version; + head->readbuf_size = 128; + break; + case TOMOYO_MEMINFO: + /* /sys/kernel/security/tomoyo/meminfo */ + head->write = tomoyo_write_memory_quota; + head->read = tomoyo_read_memory_counter; + head->readbuf_size = 512; + break; + case TOMOYO_PROFILE: + /* /sys/kernel/security/tomoyo/profile */ + head->write = tomoyo_write_profile; + head->read = tomoyo_read_profile; + break; + case TOMOYO_MANAGER: + /* /sys/kernel/security/tomoyo/manager */ + head->write = tomoyo_write_manager_policy; + head->read = tomoyo_read_manager_policy; + break; + } + if (!(file->f_mode & FMODE_READ)) { + /* + * No need to allocate read_buf since it is not opened + * for reading. + */ + head->read = NULL; + } else { + if (!head->readbuf_size) + head->readbuf_size = 4096 * 2; + head->read_buf = tomoyo_alloc(head->readbuf_size); + if (!head->read_buf) { + tomoyo_free(head); + return -ENOMEM; + } + } + if (!(file->f_mode & FMODE_WRITE)) { + /* + * No need to allocate write_buf since it is not opened + * for writing. + */ + head->write = NULL; + } else if (head->write) { + head->writebuf_size = 4096 * 2; + head->write_buf = tomoyo_alloc(head->writebuf_size); + if (!head->write_buf) { + tomoyo_free(head->read_buf); + tomoyo_free(head); + return -ENOMEM; + } + } + file->private_data = head; + /* + * Call the handler now if the file is + * /sys/kernel/security/tomoyo/self_domain + * so that the user can use + * cat < /sys/kernel/security/tomoyo/self_domain" + * to know the current process's domainname. + */ + if (type == TOMOYO_SELFDOMAIN) + tomoyo_read_control(file, NULL, 0); + return 0; +} + +/** + * tomoyo_read_control - read() for /sys/kernel/security/tomoyo/ interface. + * + * @file: Pointer to "struct file". + * @buffer: Poiner to buffer to write to. + * @buffer_len: Size of @buffer. + * + * Returns bytes read on success, negative value otherwise. + */ +static int tomoyo_read_control(struct file *file, char __user *buffer, + const int buffer_len) +{ + int len = 0; + struct tomoyo_io_buffer *head = file->private_data; + char *cp; + + if (!head->read) + return -ENOSYS; + if (mutex_lock_interruptible(&head->io_sem)) + return -EINTR; + /* Call the policy handler. */ + len = head->read(head); + if (len < 0) + goto out; + /* Write to buffer. */ + len = head->read_avail; + if (len > buffer_len) + len = buffer_len; + if (!len) + goto out; + /* head->read_buf changes by some functions. */ + cp = head->read_buf; + if (copy_to_user(buffer, cp, len)) { + len = -EFAULT; + goto out; + } + head->read_avail -= len; + memmove(cp, cp + len, head->read_avail); + out: + mutex_unlock(&head->io_sem); + return len; +} + +/** + * tomoyo_write_control - write() for /sys/kernel/security/tomoyo/ interface. + * + * @file: Pointer to "struct file". + * @buffer: Pointer to buffer to read from. + * @buffer_len: Size of @buffer. + * + * Returns @buffer_len on success, negative value otherwise. + */ +static int tomoyo_write_control(struct file *file, const char __user *buffer, + const int buffer_len) +{ + struct tomoyo_io_buffer *head = file->private_data; + int error = buffer_len; + int avail_len = buffer_len; + char *cp0 = head->write_buf; + + if (!head->write) + return -ENOSYS; + if (!access_ok(VERIFY_READ, buffer, buffer_len)) + return -EFAULT; + /* Don't allow updating policies by non manager programs. */ + if (head->write != tomoyo_write_pid && + head->write != tomoyo_write_domain_policy && + !tomoyo_is_policy_manager()) + return -EPERM; + if (mutex_lock_interruptible(&head->io_sem)) + return -EINTR; + /* Read a line and dispatch it to the policy handler. */ + while (avail_len > 0) { + char c; + if (head->write_avail >= head->writebuf_size - 1) { + error = -ENOMEM; + break; + } else if (get_user(c, buffer)) { + error = -EFAULT; + break; + } + buffer++; + avail_len--; + cp0[head->write_avail++] = c; + if (c != '\n') + continue; + cp0[head->write_avail - 1] = '\0'; + head->write_avail = 0; + tomoyo_normalize_line(cp0); + head->write(head); + } + mutex_unlock(&head->io_sem); + return error; +} + +/** + * tomoyo_close_control - close() for /sys/kernel/security/tomoyo/ interface. + * + * @file: Pointer to "struct file". + * + * Releases memory and returns 0. + */ +static int tomoyo_close_control(struct file *file) +{ + struct tomoyo_io_buffer *head = file->private_data; + + /* Release memory used for policy I/O. */ + tomoyo_free(head->read_buf); + head->read_buf = NULL; + tomoyo_free(head->write_buf); + head->write_buf = NULL; + tomoyo_free(head); + head = NULL; + file->private_data = NULL; + return 0; +} + +/** + * tomoyo_alloc_acl_element - Allocate permanent memory for ACL entry. + * + * @acl_type: Type of ACL entry. + * + * Returns pointer to the ACL entry on success, NULL otherwise. + */ +void *tomoyo_alloc_acl_element(const u8 acl_type) +{ + int len; + struct tomoyo_acl_info *ptr; + + switch (acl_type) { + case TOMOYO_TYPE_SINGLE_PATH_ACL: + len = sizeof(struct tomoyo_single_path_acl_record); + break; + case TOMOYO_TYPE_DOUBLE_PATH_ACL: + len = sizeof(struct tomoyo_double_path_acl_record); + break; + default: + return NULL; + } + ptr = tomoyo_alloc_element(len); + if (!ptr) + return NULL; + ptr->type = acl_type; + return ptr; +} + +/** + * tomoyo_open - open() for /sys/kernel/security/tomoyo/ interface. + * + * @inode: Pointer to "struct inode". + * @file: Pointer to "struct file". + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_open(struct inode *inode, struct file *file) +{ + const int key = ((u8 *) file->f_path.dentry->d_inode->i_private) + - ((u8 *) NULL); + return tomoyo_open_control(key, file); +} + +/** + * tomoyo_release - close() for /sys/kernel/security/tomoyo/ interface. + * + * @inode: Pointer to "struct inode". + * @file: Pointer to "struct file". + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_release(struct inode *inode, struct file *file) +{ + return tomoyo_close_control(file); +} + +/** + * tomoyo_read - read() for /sys/kernel/security/tomoyo/ interface. + * + * @file: Pointer to "struct file". + * @buf: Pointer to buffer. + * @count: Size of @buf. + * @ppos: Unused. + * + * Returns bytes read on success, negative value otherwise. + */ +static ssize_t tomoyo_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + return tomoyo_read_control(file, buf, count); +} + +/** + * tomoyo_write - write() for /sys/kernel/security/tomoyo/ interface. + * + * @file: Pointer to "struct file". + * @buf: Pointer to buffer. + * @count: Size of @buf. + * @ppos: Unused. + * + * Returns @count on success, negative value otherwise. + */ +static ssize_t tomoyo_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + return tomoyo_write_control(file, buf, count); +} + +/* Operations for /sys/kernel/security/tomoyo/ interface. */ +static const struct file_operations tomoyo_operations = { + .open = tomoyo_open, + .release = tomoyo_release, + .read = tomoyo_read, + .write = tomoyo_write, +}; + +/** + * tomoyo_create_entry - Create interface files under /sys/kernel/security/tomoyo/ directory. + * + * @name: The name of the interface file. + * @mode: The permission of the interface file. + * @parent: The parent directory. + * @key: Type of interface. + * + * Returns nothing. + */ +static void __init tomoyo_create_entry(const char *name, const mode_t mode, + struct dentry *parent, const u8 key) +{ + securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key, + &tomoyo_operations); +} + +/** + * tomoyo_initerface_init - Initialize /sys/kernel/security/tomoyo/ interface. + * + * Returns 0. + */ +static int __init tomoyo_initerface_init(void) +{ + struct dentry *tomoyo_dir; + + tomoyo_dir = securityfs_create_dir("tomoyo", NULL); + tomoyo_create_entry("domain_policy", 0600, tomoyo_dir, + TOMOYO_DOMAINPOLICY); + tomoyo_create_entry("exception_policy", 0600, tomoyo_dir, + TOMOYO_EXCEPTIONPOLICY); + tomoyo_create_entry("self_domain", 0400, tomoyo_dir, + TOMOYO_SELFDOMAIN); + tomoyo_create_entry(".domain_status", 0600, tomoyo_dir, + TOMOYO_DOMAIN_STATUS); + tomoyo_create_entry(".process_status", 0600, tomoyo_dir, + TOMOYO_PROCESS_STATUS); + tomoyo_create_entry("meminfo", 0600, tomoyo_dir, + TOMOYO_MEMINFO); + tomoyo_create_entry("profile", 0600, tomoyo_dir, + TOMOYO_PROFILE); + tomoyo_create_entry("manager", 0600, tomoyo_dir, + TOMOYO_MANAGER); + tomoyo_create_entry("version", 0400, tomoyo_dir, + TOMOYO_VERSION); + return 0; +} + +fs_initcall(tomoyo_initerface_init); diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h new file mode 100644 index 000000000000..6dcb7cc0ed1d --- /dev/null +++ b/security/tomoyo/common.h @@ -0,0 +1,359 @@ +/* + * security/tomoyo/common.h + * + * Common functions for TOMOYO. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#ifndef _SECURITY_TOMOYO_COMMON_H +#define _SECURITY_TOMOYO_COMMON_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct dentry; +struct vfsmount; + +/* Temporary buffer for holding pathnames. */ +struct tomoyo_page_buffer { + char buffer[4096]; +}; + +/* Structure for holding a token. */ +struct tomoyo_path_info { + const char *name; + u32 hash; /* = full_name_hash(name, strlen(name)) */ + u16 total_len; /* = strlen(name) */ + u16 const_len; /* = tomoyo_const_part_length(name) */ + bool is_dir; /* = tomoyo_strendswith(name, "/") */ + bool is_patterned; /* = tomoyo_path_contains_pattern(name) */ + u16 depth; /* = tomoyo_path_depth(name) */ +}; + +/* + * This is the max length of a token. + * + * A token consists of only ASCII printable characters. + * Non printable characters in a token is represented in \ooo style + * octal string. Thus, \ itself is represented as \\. + */ +#define TOMOYO_MAX_PATHNAME_LEN 4000 + +/* Structure for holding requested pathname. */ +struct tomoyo_path_info_with_data { + /* Keep "head" first, for this pointer is passed to tomoyo_free(). */ + struct tomoyo_path_info head; + char bariier1[16]; /* Safeguard for overrun. */ + char body[TOMOYO_MAX_PATHNAME_LEN]; + char barrier2[16]; /* Safeguard for overrun. */ +}; + +/* + * Common header for holding ACL entries. + * + * Packing "struct tomoyo_acl_info" allows + * "struct tomoyo_single_path_acl_record" to embed "u16" and + * "struct tomoyo_double_path_acl_record" to embed "u8" + * without enlarging their structure size. + */ +struct tomoyo_acl_info { + struct list_head list; + /* + * Type of this ACL entry. + * + * MSB is is_deleted flag. + */ + u8 type; +} __packed; + +/* This ACL entry is deleted. */ +#define TOMOYO_ACL_DELETED 0x80 + +/* Structure for domain information. */ +struct tomoyo_domain_info { + struct list_head list; + struct list_head acl_info_list; + /* Name of this domain. Never NULL. */ + const struct tomoyo_path_info *domainname; + u8 profile; /* Profile number to use. */ + u8 is_deleted; /* Delete flag. + 0 = active. + 1 = deleted but undeletable. + 255 = deleted and no longer undeletable. */ + bool quota_warned; /* Quota warnning flag. */ + /* DOMAIN_FLAGS_*. Use tomoyo_set_domain_flag() to modify. */ + u8 flags; +}; + +/* Profile number is an integer between 0 and 255. */ +#define TOMOYO_MAX_PROFILES 256 + +/* Ignore "allow_read" directive in exception policy. */ +#define TOMOYO_DOMAIN_FLAGS_IGNORE_GLOBAL_ALLOW_READ 1 +/* + * This domain was unable to create a new domain at tomoyo_find_next_domain() + * because the name of the domain to be created was too long or + * it could not allocate memory. + * More than one process continued execve() without domain transition. + */ +#define TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED 2 + +/* + * Structure for "allow_read/write", "allow_execute", "allow_read", + * "allow_write", "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir", + * "allow_mkfifo", "allow_mksock", "allow_mkblock", "allow_mkchar", + * "allow_truncate", "allow_symlink" and "allow_rewrite" directive. + */ +struct tomoyo_single_path_acl_record { + struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_SINGLE_PATH_ACL */ + u16 perm; + /* Pointer to single pathname. */ + const struct tomoyo_path_info *filename; +}; + +/* Structure for "allow_rename" and "allow_link" directive. */ +struct tomoyo_double_path_acl_record { + struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_DOUBLE_PATH_ACL */ + u8 perm; + /* Pointer to single pathname. */ + const struct tomoyo_path_info *filename1; + /* Pointer to single pathname. */ + const struct tomoyo_path_info *filename2; +}; + +/* Keywords for ACLs. */ +#define TOMOYO_KEYWORD_ALIAS "alias " +#define TOMOYO_KEYWORD_ALLOW_READ "allow_read " +#define TOMOYO_KEYWORD_DELETE "delete " +#define TOMOYO_KEYWORD_DENY_REWRITE "deny_rewrite " +#define TOMOYO_KEYWORD_FILE_PATTERN "file_pattern " +#define TOMOYO_KEYWORD_INITIALIZE_DOMAIN "initialize_domain " +#define TOMOYO_KEYWORD_KEEP_DOMAIN "keep_domain " +#define TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN "no_initialize_domain " +#define TOMOYO_KEYWORD_NO_KEEP_DOMAIN "no_keep_domain " +#define TOMOYO_KEYWORD_SELECT "select " +#define TOMOYO_KEYWORD_UNDELETE "undelete " +#define TOMOYO_KEYWORD_USE_PROFILE "use_profile " +#define TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ "ignore_global_allow_read" +/* A domain definition starts with . */ +#define TOMOYO_ROOT_NAME "" +#define TOMOYO_ROOT_NAME_LEN (sizeof(TOMOYO_ROOT_NAME) - 1) + +/* Index numbers for Access Controls. */ +#define TOMOYO_MAC_FOR_FILE 0 /* domain_policy.conf */ +#define TOMOYO_MAX_ACCEPT_ENTRY 1 +#define TOMOYO_VERBOSE 2 +#define TOMOYO_MAX_CONTROL_INDEX 3 + +/* Structure for reading/writing policy via securityfs interfaces. */ +struct tomoyo_io_buffer { + int (*read) (struct tomoyo_io_buffer *); + int (*write) (struct tomoyo_io_buffer *); + /* Exclusive lock for this structure. */ + struct mutex io_sem; + /* The position currently reading from. */ + struct list_head *read_var1; + /* Extra variables for reading. */ + struct list_head *read_var2; + /* The position currently writing to. */ + struct tomoyo_domain_info *write_var1; + /* The step for reading. */ + int read_step; + /* Buffer for reading. */ + char *read_buf; + /* EOF flag for reading. */ + bool read_eof; + /* Read domain ACL of specified PID? */ + bool read_single_domain; + /* Extra variable for reading. */ + u8 read_bit; + /* Bytes available for reading. */ + int read_avail; + /* Size of read buffer. */ + int readbuf_size; + /* Buffer for writing. */ + char *write_buf; + /* Bytes available for writing. */ + int write_avail; + /* Size of write buffer. */ + int writebuf_size; +}; + +/* Check whether the domain has too many ACL entries to hold. */ +bool tomoyo_domain_quota_is_ok(struct tomoyo_domain_info * const domain); +/* Transactional sprintf() for policy dump. */ +bool tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...) + __attribute__ ((format(printf, 2, 3))); +/* Check whether the domainname is correct. */ +bool tomoyo_is_correct_domain(const unsigned char *domainname, + const char *function); +/* Check whether the token is correct. */ +bool tomoyo_is_correct_path(const char *filename, const s8 start_type, + const s8 pattern_type, const s8 end_type, + const char *function); +/* Check whether the token can be a domainname. */ +bool tomoyo_is_domain_def(const unsigned char *buffer); +/* Check whether the given filename matches the given pattern. */ +bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename, + const struct tomoyo_path_info *pattern); +/* Read "alias" entry in exception policy. */ +bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head); +/* + * Read "initialize_domain" and "no_initialize_domain" entry + * in exception policy. + */ +bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head); +/* Read "keep_domain" and "no_keep_domain" entry in exception policy. */ +bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head); +/* Read "file_pattern" entry in exception policy. */ +bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head); +/* Read "allow_read" entry in exception policy. */ +bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head); +/* Read "deny_rewrite" entry in exception policy. */ +bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head); +/* Write domain policy violation warning message to console? */ +bool tomoyo_verbose_mode(const struct tomoyo_domain_info *domain); +/* Convert double path operation to operation name. */ +const char *tomoyo_dp2keyword(const u8 operation); +/* Get the last component of the given domainname. */ +const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain); +/* Get warning message. */ +const char *tomoyo_get_msg(const bool is_enforce); +/* Convert single path operation to operation name. */ +const char *tomoyo_sp2keyword(const u8 operation); +/* Delete a domain. */ +int tomoyo_delete_domain(char *data); +/* Create "alias" entry in exception policy. */ +int tomoyo_write_alias_policy(char *data, const bool is_delete); +/* + * Create "initialize_domain" and "no_initialize_domain" entry + * in exception policy. + */ +int tomoyo_write_domain_initializer_policy(char *data, const bool is_not, + const bool is_delete); +/* Create "keep_domain" and "no_keep_domain" entry in exception policy. */ +int tomoyo_write_domain_keeper_policy(char *data, const bool is_not, + const bool is_delete); +/* + * Create "allow_read/write", "allow_execute", "allow_read", "allow_write", + * "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir", + * "allow_mkfifo", "allow_mksock", "allow_mkblock", "allow_mkchar", + * "allow_truncate", "allow_symlink", "allow_rewrite", "allow_rename" and + * "allow_link" entry in domain policy. + */ +int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain, + const bool is_delete); +/* Create "allow_read" entry in exception policy. */ +int tomoyo_write_globally_readable_policy(char *data, const bool is_delete); +/* Create "deny_rewrite" entry in exception policy. */ +int tomoyo_write_no_rewrite_policy(char *data, const bool is_delete); +/* Create "file_pattern" entry in exception policy. */ +int tomoyo_write_pattern_policy(char *data, const bool is_delete); +/* Find a domain by the given name. */ +struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname); +/* Find or create a domain by the given name. */ +struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char * + domainname, + const u8 profile); +/* Undelete a domain. */ +struct tomoyo_domain_info *tomoyo_undelete_domain(const char *domainname); +/* Check mode for specified functionality. */ +unsigned int tomoyo_check_flags(const struct tomoyo_domain_info *domain, + const u8 index); +/* Allocate memory for structures. */ +void *tomoyo_alloc_acl_element(const u8 acl_type); +/* Fill in "struct tomoyo_path_info" members. */ +void tomoyo_fill_path_info(struct tomoyo_path_info *ptr); +/* Run policy loader when /sbin/init starts. */ +void tomoyo_load_policy(const char *filename); +/* Change "struct tomoyo_domain_info"->flags. */ +void tomoyo_set_domain_flag(struct tomoyo_domain_info *domain, + const bool is_delete, const u8 flags); + +/* strcmp() for "struct tomoyo_path_info" structure. */ +static inline bool tomoyo_pathcmp(const struct tomoyo_path_info *a, + const struct tomoyo_path_info *b) +{ + return a->hash != b->hash || strcmp(a->name, b->name); +} + +/* Get type of an ACL entry. */ +static inline u8 tomoyo_acl_type1(struct tomoyo_acl_info *ptr) +{ + return ptr->type & ~TOMOYO_ACL_DELETED; +} + +/* Get type of an ACL entry. */ +static inline u8 tomoyo_acl_type2(struct tomoyo_acl_info *ptr) +{ + return ptr->type; +} + +/** + * tomoyo_is_valid - Check whether the character is a valid char. + * + * @c: The character to check. + * + * Returns true if @c is a valid character, false otherwise. + */ +static inline bool tomoyo_is_valid(const unsigned char c) +{ + return c > ' ' && c < 127; +} + +/** + * tomoyo_is_invalid - Check whether the character is an invalid char. + * + * @c: The character to check. + * + * Returns true if @c is an invalid character, false otherwise. + */ +static inline bool tomoyo_is_invalid(const unsigned char c) +{ + return c && (c <= ' ' || c >= 127); +} + +/* The list for "struct tomoyo_domain_info". */ +extern struct list_head tomoyo_domain_list; +extern struct rw_semaphore tomoyo_domain_list_lock; + +/* Lock for domain->acl_info_list. */ +extern struct rw_semaphore tomoyo_domain_acl_info_list_lock; + +/* Has /sbin/init started? */ +extern bool tomoyo_policy_loaded; + +/* The kernel's domain. */ +extern struct tomoyo_domain_info tomoyo_kernel_domain; + +/** + * list_for_each_cookie - iterate over a list with cookie. + * @pos: the &struct list_head to use as a loop cursor. + * @cookie: the &struct list_head to use as a cookie. + * @head: the head for your list. + * + * Same with list_for_each() except that this primitive uses @cookie + * so that we can continue iteration. + * @cookie must be NULL when iteration starts, and @cookie will become + * NULL when iteration finishes. + */ +#define list_for_each_cookie(pos, cookie, head) \ + for (({ if (!cookie) \ + cookie = head; }), \ + pos = (cookie)->next; \ + prefetch(pos->next), pos != (head) || ((cookie) = NULL); \ + (cookie) = pos, pos = pos->next) + +#endif /* !defined(_SECURITY_TOMOYO_COMMON_H) */ -- cgit v1.2.3 From b69a54ee582373d76e4b5560970db5b8c618b12a Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:14 +0900 Subject: File operation restriction part. This file controls file related operations of TOMOYO Linux. tomoyo/tomoyo.c calls the following six functions in this file. Each function handles the following access types. * tomoyo_check_file_perm sysctl()'s "read" and "write". * tomoyo_check_exec_perm "execute". * tomoyo_check_open_permission open(2) for "read" and "write". * tomoyo_check_1path_perm "create", "unlink", "mkdir", "rmdir", "mkfifo", "mksock", "mkblock", "mkchar", "truncate" and "symlink". * tomoyo_check_2path_perm "rename" and "unlink". * tomoyo_check_rewrite_permission "rewrite". ("rewrite" are operations which may lose already recorded data of a file, i.e. open(!O_APPEND) || open(O_TRUNC) || truncate() || ftruncate()) The functions which actually checks ACLs are the following three functions. Each function handles the following access types. ACL directive is expressed by "allow_". * tomoyo_check_file_acl Open() operation and execve() operation. ("read", "write", "read/write" and "execute") * tomoyo_check_single_write_acl Directory modification operations with 1 pathname. ("create", "unlink", "mkdir", "rmdir", "mkfifo", "mksock", "mkblock", "mkchar", "truncate", "symlink" and "rewrite") * tomoyo_check_double_write_acl Directory modification operations with 2 pathname. ("link" and "rename") Also, this file contains handlers of some utility directives for file related operations. * "allow_read": specifies globally (for all domains) readable files. * "path_group": specifies pathname macro. * "deny_rewrite": restricts rewrite operation. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/file.c | 1241 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1241 insertions(+) create mode 100644 security/tomoyo/file.c diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c new file mode 100644 index 000000000000..65f50c1c5ee9 --- /dev/null +++ b/security/tomoyo/file.c @@ -0,0 +1,1241 @@ +/* + * security/tomoyo/file.c + * + * Implementation of the Domain-Based Mandatory Access Control. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#include "common.h" +#include "tomoyo.h" +#include "realpath.h" +#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE]) + +/* Structure for "allow_read" keyword. */ +struct tomoyo_globally_readable_file_entry { + struct list_head list; + const struct tomoyo_path_info *filename; + bool is_deleted; +}; + +/* Structure for "file_pattern" keyword. */ +struct tomoyo_pattern_entry { + struct list_head list; + const struct tomoyo_path_info *pattern; + bool is_deleted; +}; + +/* Structure for "deny_rewrite" keyword. */ +struct tomoyo_no_rewrite_entry { + struct list_head list; + const struct tomoyo_path_info *pattern; + bool is_deleted; +}; + +/* Keyword array for single path operations. */ +static const char *tomoyo_sp_keyword[TOMOYO_MAX_SINGLE_PATH_OPERATION] = { + [TOMOYO_TYPE_READ_WRITE_ACL] = "read/write", + [TOMOYO_TYPE_EXECUTE_ACL] = "execute", + [TOMOYO_TYPE_READ_ACL] = "read", + [TOMOYO_TYPE_WRITE_ACL] = "write", + [TOMOYO_TYPE_CREATE_ACL] = "create", + [TOMOYO_TYPE_UNLINK_ACL] = "unlink", + [TOMOYO_TYPE_MKDIR_ACL] = "mkdir", + [TOMOYO_TYPE_RMDIR_ACL] = "rmdir", + [TOMOYO_TYPE_MKFIFO_ACL] = "mkfifo", + [TOMOYO_TYPE_MKSOCK_ACL] = "mksock", + [TOMOYO_TYPE_MKBLOCK_ACL] = "mkblock", + [TOMOYO_TYPE_MKCHAR_ACL] = "mkchar", + [TOMOYO_TYPE_TRUNCATE_ACL] = "truncate", + [TOMOYO_TYPE_SYMLINK_ACL] = "symlink", + [TOMOYO_TYPE_REWRITE_ACL] = "rewrite", +}; + +/* Keyword array for double path operations. */ +static const char *tomoyo_dp_keyword[TOMOYO_MAX_DOUBLE_PATH_OPERATION] = { + [TOMOYO_TYPE_LINK_ACL] = "link", + [TOMOYO_TYPE_RENAME_ACL] = "rename", +}; + +/** + * tomoyo_sp2keyword - Get the name of single path operation. + * + * @operation: Type of operation. + * + * Returns the name of single path operation. + */ +const char *tomoyo_sp2keyword(const u8 operation) +{ + return (operation < TOMOYO_MAX_SINGLE_PATH_OPERATION) + ? tomoyo_sp_keyword[operation] : NULL; +} + +/** + * tomoyo_dp2keyword - Get the name of double path operation. + * + * @operation: Type of operation. + * + * Returns the name of double path operation. + */ +const char *tomoyo_dp2keyword(const u8 operation) +{ + return (operation < TOMOYO_MAX_DOUBLE_PATH_OPERATION) + ? tomoyo_dp_keyword[operation] : NULL; +} + +/** + * tomoyo_strendswith - Check whether the token ends with the given token. + * + * @name: The token to check. + * @tail: The token to find. + * + * Returns true if @name ends with @tail, false otherwise. + */ +static bool tomoyo_strendswith(const char *name, const char *tail) +{ + int len; + + if (!name || !tail) + return false; + len = strlen(name) - strlen(tail); + return len >= 0 && !strcmp(name + len, tail); +} + +/** + * tomoyo_get_path - Get realpath. + * + * @path: Pointer to "struct path". + * + * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise. + */ +static struct tomoyo_path_info *tomoyo_get_path(struct path *path) +{ + int error; + struct tomoyo_path_info_with_data *buf = tomoyo_alloc(sizeof(*buf)); + + if (!buf) + return NULL; + /* Reserve one byte for appending "/". */ + error = tomoyo_realpath_from_path2(path, buf->body, + sizeof(buf->body) - 2); + if (!error) { + buf->head.name = buf->body; + tomoyo_fill_path_info(&buf->head); + return &buf->head; + } + tomoyo_free(buf); + return NULL; +} + +/* Lock for domain->acl_info_list. */ +DECLARE_RWSEM(tomoyo_domain_acl_info_list_lock); + +static int tomoyo_update_double_path_acl(const u8 type, const char *filename1, + const char *filename2, + struct tomoyo_domain_info * + const domain, const bool is_delete); +static int tomoyo_update_single_path_acl(const u8 type, const char *filename, + struct tomoyo_domain_info * + const domain, const bool is_delete); + +/* The list for "struct tomoyo_globally_readable_file_entry". */ +static LIST_HEAD(tomoyo_globally_readable_list); +static DECLARE_RWSEM(tomoyo_globally_readable_list_lock); + +/** + * tomoyo_update_globally_readable_entry - Update "struct tomoyo_globally_readable_file_entry" list. + * + * @filename: Filename unconditionally permitted to open() for reading. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_globally_readable_entry(const char *filename, + const bool is_delete) +{ + struct tomoyo_globally_readable_file_entry *new_entry; + struct tomoyo_globally_readable_file_entry *ptr; + const struct tomoyo_path_info *saved_filename; + int error = -ENOMEM; + + if (!tomoyo_is_correct_path(filename, 1, 0, -1, __func__)) + return -EINVAL; + saved_filename = tomoyo_save_name(filename); + if (!saved_filename) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_globally_readable_list_lock); + list_for_each_entry(ptr, &tomoyo_globally_readable_list, list) { + if (ptr->filename != saved_filename) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->filename = saved_filename; + list_add_tail(&new_entry->list, &tomoyo_globally_readable_list); + error = 0; + out: + up_write(&tomoyo_globally_readable_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_is_globally_readable_file - Check if the file is unconditionnaly permitted to be open()ed for reading. + * + * @filename: The filename to check. + * + * Returns true if any domain can open @filename for reading, false otherwise. + */ +static bool tomoyo_is_globally_readable_file(const struct tomoyo_path_info * + filename) +{ + struct tomoyo_globally_readable_file_entry *ptr; + bool found = false; + down_read(&tomoyo_globally_readable_list_lock); + list_for_each_entry(ptr, &tomoyo_globally_readable_list, list) { + if (!ptr->is_deleted && + tomoyo_path_matches_pattern(filename, ptr->filename)) { + found = true; + break; + } + } + up_read(&tomoyo_globally_readable_list_lock); + return found; +} + +/** + * tomoyo_write_globally_readable_policy - Write "struct tomoyo_globally_readable_file_entry" list. + * + * @data: String to parse. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_write_globally_readable_policy(char *data, const bool is_delete) +{ + return tomoyo_update_globally_readable_entry(data, is_delete); +} + +/** + * tomoyo_read_globally_readable_policy - Read "struct tomoyo_globally_readable_file_entry" list. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns true on success, false otherwise. + */ +bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + down_read(&tomoyo_globally_readable_list_lock); + list_for_each_cookie(pos, head->read_var2, + &tomoyo_globally_readable_list) { + struct tomoyo_globally_readable_file_entry *ptr; + ptr = list_entry(pos, + struct tomoyo_globally_readable_file_entry, + list); + if (ptr->is_deleted) + continue; + if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n", + ptr->filename->name)) { + done = false; + break; + } + } + up_read(&tomoyo_globally_readable_list_lock); + return done; +} + +/* The list for "struct tomoyo_pattern_entry". */ +static LIST_HEAD(tomoyo_pattern_list); +static DECLARE_RWSEM(tomoyo_pattern_list_lock); + +/** + * tomoyo_update_file_pattern_entry - Update "struct tomoyo_pattern_entry" list. + * + * @pattern: Pathname pattern. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_file_pattern_entry(const char *pattern, + const bool is_delete) +{ + struct tomoyo_pattern_entry *new_entry; + struct tomoyo_pattern_entry *ptr; + const struct tomoyo_path_info *saved_pattern; + int error = -ENOMEM; + + if (!tomoyo_is_correct_path(pattern, 0, 1, 0, __func__)) + return -EINVAL; + saved_pattern = tomoyo_save_name(pattern); + if (!saved_pattern) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_pattern_list_lock); + list_for_each_entry(ptr, &tomoyo_pattern_list, list) { + if (saved_pattern != ptr->pattern) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->pattern = saved_pattern; + list_add_tail(&new_entry->list, &tomoyo_pattern_list); + error = 0; + out: + up_write(&tomoyo_pattern_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_get_file_pattern - Get patterned pathname. + * + * @filename: The filename to find patterned pathname. + * + * Returns pointer to pathname pattern if matched, @filename otherwise. + */ +static const struct tomoyo_path_info * +tomoyo_get_file_pattern(const struct tomoyo_path_info *filename) +{ + struct tomoyo_pattern_entry *ptr; + const struct tomoyo_path_info *pattern = NULL; + + down_read(&tomoyo_pattern_list_lock); + list_for_each_entry(ptr, &tomoyo_pattern_list, list) { + if (ptr->is_deleted) + continue; + if (!tomoyo_path_matches_pattern(filename, ptr->pattern)) + continue; + pattern = ptr->pattern; + if (tomoyo_strendswith(pattern->name, "/\\*")) { + /* Do nothing. Try to find the better match. */ + } else { + /* This would be the better match. Use this. */ + break; + } + } + up_read(&tomoyo_pattern_list_lock); + if (pattern) + filename = pattern; + return filename; +} + +/** + * tomoyo_write_pattern_policy - Write "struct tomoyo_pattern_entry" list. + * + * @data: String to parse. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_write_pattern_policy(char *data, const bool is_delete) +{ + return tomoyo_update_file_pattern_entry(data, is_delete); +} + +/** + * tomoyo_read_file_pattern - Read "struct tomoyo_pattern_entry" list. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns true on success, false otherwise. + */ +bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + down_read(&tomoyo_pattern_list_lock); + list_for_each_cookie(pos, head->read_var2, &tomoyo_pattern_list) { + struct tomoyo_pattern_entry *ptr; + ptr = list_entry(pos, struct tomoyo_pattern_entry, list); + if (ptr->is_deleted) + continue; + if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN "%s\n", + ptr->pattern->name)) { + done = false; + break; + } + } + up_read(&tomoyo_pattern_list_lock); + return done; +} + +/* The list for "struct tomoyo_no_rewrite_entry". */ +static LIST_HEAD(tomoyo_no_rewrite_list); +static DECLARE_RWSEM(tomoyo_no_rewrite_list_lock); + +/** + * tomoyo_update_no_rewrite_entry - Update "struct tomoyo_no_rewrite_entry" list. + * + * @pattern: Pathname pattern that are not rewritable by default. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_no_rewrite_entry(const char *pattern, + const bool is_delete) +{ + struct tomoyo_no_rewrite_entry *new_entry, *ptr; + const struct tomoyo_path_info *saved_pattern; + int error = -ENOMEM; + + if (!tomoyo_is_correct_path(pattern, 0, 0, 0, __func__)) + return -EINVAL; + saved_pattern = tomoyo_save_name(pattern); + if (!saved_pattern) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_no_rewrite_list_lock); + list_for_each_entry(ptr, &tomoyo_no_rewrite_list, list) { + if (ptr->pattern != saved_pattern) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->pattern = saved_pattern; + list_add_tail(&new_entry->list, &tomoyo_no_rewrite_list); + error = 0; + out: + up_write(&tomoyo_no_rewrite_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_is_no_rewrite_file - Check if the given pathname is not permitted to be rewrited. + * + * @filename: Filename to check. + * + * Returns true if @filename is specified by "deny_rewrite" directive, + * false otherwise. + */ +static bool tomoyo_is_no_rewrite_file(const struct tomoyo_path_info *filename) +{ + struct tomoyo_no_rewrite_entry *ptr; + bool found = false; + + down_read(&tomoyo_no_rewrite_list_lock); + list_for_each_entry(ptr, &tomoyo_no_rewrite_list, list) { + if (ptr->is_deleted) + continue; + if (!tomoyo_path_matches_pattern(filename, ptr->pattern)) + continue; + found = true; + break; + } + up_read(&tomoyo_no_rewrite_list_lock); + return found; +} + +/** + * tomoyo_write_no_rewrite_policy - Write "struct tomoyo_no_rewrite_entry" list. + * + * @data: String to parse. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_write_no_rewrite_policy(char *data, const bool is_delete) +{ + return tomoyo_update_no_rewrite_entry(data, is_delete); +} + +/** + * tomoyo_read_no_rewrite_policy - Read "struct tomoyo_no_rewrite_entry" list. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns true on success, false otherwise. + */ +bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + down_read(&tomoyo_no_rewrite_list_lock); + list_for_each_cookie(pos, head->read_var2, &tomoyo_no_rewrite_list) { + struct tomoyo_no_rewrite_entry *ptr; + ptr = list_entry(pos, struct tomoyo_no_rewrite_entry, list); + if (ptr->is_deleted) + continue; + if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE "%s\n", + ptr->pattern->name)) { + done = false; + break; + } + } + up_read(&tomoyo_no_rewrite_list_lock); + return done; +} + +/** + * tomoyo_update_file_acl - Update file's read/write/execute ACL. + * + * @filename: Filename. + * @perm: Permission (between 1 to 7). + * @domain: Pointer to "struct tomoyo_domain_info". + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + * + * This is legacy support interface for older policy syntax. + * Current policy syntax uses "allow_read/write" instead of "6", + * "allow_read" instead of "4", "allow_write" instead of "2", + * "allow_execute" instead of "1". + */ +static int tomoyo_update_file_acl(const char *filename, u8 perm, + struct tomoyo_domain_info * const domain, + const bool is_delete) +{ + if (perm > 7 || !perm) { + printk(KERN_DEBUG "%s: Invalid permission '%d %s'\n", + __func__, perm, filename); + return -EINVAL; + } + if (filename[0] != '@' && tomoyo_strendswith(filename, "/")) + /* + * Only 'allow_mkdir' and 'allow_rmdir' are valid for + * directory permissions. + */ + return 0; + if (perm & 4) + tomoyo_update_single_path_acl(TOMOYO_TYPE_READ_ACL, filename, + domain, is_delete); + if (perm & 2) + tomoyo_update_single_path_acl(TOMOYO_TYPE_WRITE_ACL, filename, + domain, is_delete); + if (perm & 1) + tomoyo_update_single_path_acl(TOMOYO_TYPE_EXECUTE_ACL, + filename, domain, is_delete); + return 0; +} + +/** + * tomoyo_check_single_path_acl2 - Check permission for single path operation. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @filename: Filename to check. + * @perm: Permission. + * @may_use_pattern: True if patterned ACL is permitted. + * + * Returns 0 on success, -EPERM otherwise. + */ +static int tomoyo_check_single_path_acl2(const struct tomoyo_domain_info * + domain, + const struct tomoyo_path_info * + filename, + const u16 perm, + const bool may_use_pattern) +{ + struct tomoyo_acl_info *ptr; + int error = -EPERM; + + down_read(&tomoyo_domain_acl_info_list_lock); + list_for_each_entry(ptr, &domain->acl_info_list, list) { + struct tomoyo_single_path_acl_record *acl; + if (tomoyo_acl_type2(ptr) != TOMOYO_TYPE_SINGLE_PATH_ACL) + continue; + acl = container_of(ptr, struct tomoyo_single_path_acl_record, + head); + if (!(acl->perm & perm)) + continue; + if (may_use_pattern || !acl->filename->is_patterned) { + if (!tomoyo_path_matches_pattern(filename, + acl->filename)) + continue; + } else { + continue; + } + error = 0; + break; + } + up_read(&tomoyo_domain_acl_info_list_lock); + return error; +} + +/** + * tomoyo_check_file_acl - Check permission for opening files. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @filename: Filename to check. + * @operation: Mode ("read" or "write" or "read/write" or "execute"). + * + * Returns 0 on success, -EPERM otherwise. + */ +static int tomoyo_check_file_acl(const struct tomoyo_domain_info *domain, + const struct tomoyo_path_info *filename, + const u8 operation) +{ + u16 perm = 0; + + if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE)) + return 0; + if (operation == 6) + perm = 1 << TOMOYO_TYPE_READ_WRITE_ACL; + else if (operation == 4) + perm = 1 << TOMOYO_TYPE_READ_ACL; + else if (operation == 2) + perm = 1 << TOMOYO_TYPE_WRITE_ACL; + else if (operation == 1) + perm = 1 << TOMOYO_TYPE_EXECUTE_ACL; + else + BUG(); + return tomoyo_check_single_path_acl2(domain, filename, perm, + operation != 1); +} + +/** + * tomoyo_check_file_perm2 - Check permission for opening files. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @filename: Filename to check. + * @perm: Mode ("read" or "write" or "read/write" or "execute"). + * @operation: Operation name passed used for verbose mode. + * @mode: Access control mode. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_check_file_perm2(struct tomoyo_domain_info * const domain, + const struct tomoyo_path_info *filename, + const u8 perm, const char *operation, + const u8 mode) +{ + const bool is_enforce = (mode == 3); + const char *msg = ""; + int error = 0; + + if (!filename) + return 0; + error = tomoyo_check_file_acl(domain, filename, perm); + if (error && perm == 4 && + (domain->flags & TOMOYO_DOMAIN_FLAGS_IGNORE_GLOBAL_ALLOW_READ) == 0 + && tomoyo_is_globally_readable_file(filename)) + error = 0; + if (perm == 6) + msg = tomoyo_sp2keyword(TOMOYO_TYPE_READ_WRITE_ACL); + else if (perm == 4) + msg = tomoyo_sp2keyword(TOMOYO_TYPE_READ_ACL); + else if (perm == 2) + msg = tomoyo_sp2keyword(TOMOYO_TYPE_WRITE_ACL); + else if (perm == 1) + msg = tomoyo_sp2keyword(TOMOYO_TYPE_EXECUTE_ACL); + else + BUG(); + if (!error) + return 0; + if (tomoyo_verbose_mode(domain)) + printk(KERN_WARNING "TOMOYO-%s: Access '%s(%s) %s' denied " + "for %s\n", tomoyo_get_msg(is_enforce), msg, operation, + filename->name, tomoyo_get_last_name(domain)); + if (is_enforce) + return error; + if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) { + /* Don't use patterns for execute permission. */ + const struct tomoyo_path_info *patterned_file = (perm != 1) ? + tomoyo_get_file_pattern(filename) : filename; + tomoyo_update_file_acl(patterned_file->name, perm, + domain, false); + } + return 0; +} + +/** + * tomoyo_write_file_policy - Update file related list. + * + * @data: String to parse. + * @domain: Pointer to "struct tomoyo_domain_info". + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain, + const bool is_delete) +{ + char *filename = strchr(data, ' '); + char *filename2; + unsigned int perm; + u8 type; + + if (!filename) + return -EINVAL; + *filename++ = '\0'; + if (sscanf(data, "%u", &perm) == 1) + return tomoyo_update_file_acl(filename, (u8) perm, domain, + is_delete); + if (strncmp(data, "allow_", 6)) + goto out; + data += 6; + for (type = 0; type < TOMOYO_MAX_SINGLE_PATH_OPERATION; type++) { + if (strcmp(data, tomoyo_sp_keyword[type])) + continue; + return tomoyo_update_single_path_acl(type, filename, + domain, is_delete); + } + filename2 = strchr(filename, ' '); + if (!filename2) + goto out; + *filename2++ = '\0'; + for (type = 0; type < TOMOYO_MAX_DOUBLE_PATH_OPERATION; type++) { + if (strcmp(data, tomoyo_dp_keyword[type])) + continue; + return tomoyo_update_double_path_acl(type, filename, filename2, + domain, is_delete); + } + out: + return -EINVAL; +} + +/** + * tomoyo_update_single_path_acl - Update "struct tomoyo_single_path_acl_record" list. + * + * @type: Type of operation. + * @filename: Filename. + * @domain: Pointer to "struct tomoyo_domain_info". + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_single_path_acl(const u8 type, const char *filename, + struct tomoyo_domain_info * + const domain, const bool is_delete) +{ + static const u16 rw_mask = + (1 << TOMOYO_TYPE_READ_ACL) | (1 << TOMOYO_TYPE_WRITE_ACL); + const struct tomoyo_path_info *saved_filename; + struct tomoyo_acl_info *ptr; + struct tomoyo_single_path_acl_record *acl; + int error = -ENOMEM; + const u16 perm = 1 << type; + + if (!domain) + return -EINVAL; + if (!tomoyo_is_correct_path(filename, 0, 0, 0, __func__)) + return -EINVAL; + saved_filename = tomoyo_save_name(filename); + if (!saved_filename) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_acl_info_list_lock); + if (is_delete) + goto delete; + list_for_each_entry(ptr, &domain->acl_info_list, list) { + if (tomoyo_acl_type1(ptr) != TOMOYO_TYPE_SINGLE_PATH_ACL) + continue; + acl = container_of(ptr, struct tomoyo_single_path_acl_record, + head); + if (acl->filename != saved_filename) + continue; + /* Special case. Clear all bits if marked as deleted. */ + if (ptr->type & TOMOYO_ACL_DELETED) + acl->perm = 0; + acl->perm |= perm; + if ((acl->perm & rw_mask) == rw_mask) + acl->perm |= 1 << TOMOYO_TYPE_READ_WRITE_ACL; + else if (acl->perm & (1 << TOMOYO_TYPE_READ_WRITE_ACL)) + acl->perm |= rw_mask; + ptr->type &= ~TOMOYO_ACL_DELETED; + error = 0; + goto out; + } + /* Not found. Append it to the tail. */ + acl = tomoyo_alloc_acl_element(TOMOYO_TYPE_SINGLE_PATH_ACL); + if (!acl) + goto out; + acl->perm = perm; + if (perm == (1 << TOMOYO_TYPE_READ_WRITE_ACL)) + acl->perm |= rw_mask; + acl->filename = saved_filename; + list_add_tail(&acl->head.list, &domain->acl_info_list); + error = 0; + goto out; + delete: + error = -ENOENT; + list_for_each_entry(ptr, &domain->acl_info_list, list) { + if (tomoyo_acl_type2(ptr) != TOMOYO_TYPE_SINGLE_PATH_ACL) + continue; + acl = container_of(ptr, struct tomoyo_single_path_acl_record, + head); + if (acl->filename != saved_filename) + continue; + acl->perm &= ~perm; + if ((acl->perm & rw_mask) != rw_mask) + acl->perm &= ~(1 << TOMOYO_TYPE_READ_WRITE_ACL); + else if (!(acl->perm & (1 << TOMOYO_TYPE_READ_WRITE_ACL))) + acl->perm &= ~rw_mask; + if (!acl->perm) + ptr->type |= TOMOYO_ACL_DELETED; + error = 0; + break; + } + out: + up_write(&tomoyo_domain_acl_info_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_update_double_path_acl - Update "struct tomoyo_double_path_acl_record" list. + * + * @type: Type of operation. + * @filename1: First filename. + * @filename2: Second filename. + * @domain: Pointer to "struct tomoyo_domain_info". + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_double_path_acl(const u8 type, const char *filename1, + const char *filename2, + struct tomoyo_domain_info * + const domain, const bool is_delete) +{ + const struct tomoyo_path_info *saved_filename1; + const struct tomoyo_path_info *saved_filename2; + struct tomoyo_acl_info *ptr; + struct tomoyo_double_path_acl_record *acl; + int error = -ENOMEM; + const u8 perm = 1 << type; + + if (!domain) + return -EINVAL; + if (!tomoyo_is_correct_path(filename1, 0, 0, 0, __func__) || + !tomoyo_is_correct_path(filename2, 0, 0, 0, __func__)) + return -EINVAL; + saved_filename1 = tomoyo_save_name(filename1); + saved_filename2 = tomoyo_save_name(filename2); + if (!saved_filename1 || !saved_filename2) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_acl_info_list_lock); + if (is_delete) + goto delete; + list_for_each_entry(ptr, &domain->acl_info_list, list) { + if (tomoyo_acl_type1(ptr) != TOMOYO_TYPE_DOUBLE_PATH_ACL) + continue; + acl = container_of(ptr, struct tomoyo_double_path_acl_record, + head); + if (acl->filename1 != saved_filename1 || + acl->filename2 != saved_filename2) + continue; + /* Special case. Clear all bits if marked as deleted. */ + if (ptr->type & TOMOYO_ACL_DELETED) + acl->perm = 0; + acl->perm |= perm; + ptr->type &= ~TOMOYO_ACL_DELETED; + error = 0; + goto out; + } + /* Not found. Append it to the tail. */ + acl = tomoyo_alloc_acl_element(TOMOYO_TYPE_DOUBLE_PATH_ACL); + if (!acl) + goto out; + acl->perm = perm; + acl->filename1 = saved_filename1; + acl->filename2 = saved_filename2; + list_add_tail(&acl->head.list, &domain->acl_info_list); + error = 0; + goto out; + delete: + error = -ENOENT; + list_for_each_entry(ptr, &domain->acl_info_list, list) { + if (tomoyo_acl_type2(ptr) != TOMOYO_TYPE_DOUBLE_PATH_ACL) + continue; + acl = container_of(ptr, struct tomoyo_double_path_acl_record, + head); + if (acl->filename1 != saved_filename1 || + acl->filename2 != saved_filename2) + continue; + acl->perm &= ~perm; + if (!acl->perm) + ptr->type |= TOMOYO_ACL_DELETED; + error = 0; + break; + } + out: + up_write(&tomoyo_domain_acl_info_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_check_single_path_acl - Check permission for single path operation. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @type: Type of operation. + * @filename: Filename to check. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_check_single_path_acl(struct tomoyo_domain_info *domain, + const u8 type, + const struct tomoyo_path_info *filename) +{ + if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE)) + return 0; + return tomoyo_check_single_path_acl2(domain, filename, 1 << type, 1); +} + +/** + * tomoyo_check_double_path_acl - Check permission for double path operation. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @type: Type of operation. + * @filename1: First filename to check. + * @filename2: Second filename to check. + * + * Returns 0 on success, -EPERM otherwise. + */ +static int tomoyo_check_double_path_acl(const struct tomoyo_domain_info *domain, + const u8 type, + const struct tomoyo_path_info * + filename1, + const struct tomoyo_path_info * + filename2) +{ + struct tomoyo_acl_info *ptr; + const u8 perm = 1 << type; + int error = -EPERM; + + if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE)) + return 0; + down_read(&tomoyo_domain_acl_info_list_lock); + list_for_each_entry(ptr, &domain->acl_info_list, list) { + struct tomoyo_double_path_acl_record *acl; + if (tomoyo_acl_type2(ptr) != TOMOYO_TYPE_DOUBLE_PATH_ACL) + continue; + acl = container_of(ptr, struct tomoyo_double_path_acl_record, + head); + if (!(acl->perm & perm)) + continue; + if (!tomoyo_path_matches_pattern(filename1, acl->filename1)) + continue; + if (!tomoyo_path_matches_pattern(filename2, acl->filename2)) + continue; + error = 0; + break; + } + up_read(&tomoyo_domain_acl_info_list_lock); + return error; +} + +/** + * tomoyo_check_single_path_permission2 - Check permission for single path operation. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @operation: Type of operation. + * @filename: Filename to check. + * @mode: Access control mode. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_check_single_path_permission2(struct tomoyo_domain_info * + const domain, u8 operation, + const struct tomoyo_path_info * + filename, const u8 mode) +{ + const char *msg; + int error; + const bool is_enforce = (mode == 3); + + if (!mode) + return 0; + next: + error = tomoyo_check_single_path_acl(domain, operation, filename); + msg = tomoyo_sp2keyword(operation); + if (!error) + goto ok; + if (tomoyo_verbose_mode(domain)) + printk(KERN_WARNING "TOMOYO-%s: Access '%s %s' denied for %s\n", + tomoyo_get_msg(is_enforce), msg, filename->name, + tomoyo_get_last_name(domain)); + if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) { + const char *name = tomoyo_get_file_pattern(filename)->name; + tomoyo_update_single_path_acl(operation, name, domain, false); + } + if (!is_enforce) + error = 0; + ok: + /* + * Since "allow_truncate" doesn't imply "allow_rewrite" permission, + * we need to check "allow_rewrite" permission if the filename is + * specified by "deny_rewrite" keyword. + */ + if (!error && operation == TOMOYO_TYPE_TRUNCATE_ACL && + tomoyo_is_no_rewrite_file(filename)) { + operation = TOMOYO_TYPE_REWRITE_ACL; + goto next; + } + return error; +} + +/** + * tomoyo_check_file_perm - Check permission for sysctl()'s "read" and "write". + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @filename: Filename to check. + * @perm: Mode ("read" or "write" or "read/write"). + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_check_file_perm(struct tomoyo_domain_info *domain, + const char *filename, const u8 perm) +{ + struct tomoyo_path_info name; + const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); + + if (!mode) + return 0; + name.name = filename; + tomoyo_fill_path_info(&name); + return tomoyo_check_file_perm2(domain, &name, perm, "sysctl", mode); +} + +/** + * tomoyo_check_exec_perm - Check permission for "execute". + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @filename: Check permission for "execute". + * @tmp: Buffer for temporary use. + * + * Returns 0 on success, negativevalue otherwise. + */ +int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain, + const struct tomoyo_path_info *filename, + struct tomoyo_page_buffer *tmp) +{ + const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); + + if (!mode) + return 0; + return tomoyo_check_file_perm2(domain, filename, 1, "do_execve", mode); +} + +/** + * tomoyo_check_open_permission - Check permission for "read" and "write". + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @path: Pointer to "struct path". + * @flag: Flags for open(). + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_check_open_permission(struct tomoyo_domain_info *domain, + struct path *path, const int flag) +{ + const u8 acc_mode = ACC_MODE(flag); + int error = -ENOMEM; + struct tomoyo_path_info *buf; + const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); + const bool is_enforce = (mode == 3); + + if (!mode || !path->mnt) + return 0; + if (acc_mode == 0) + return 0; + if (path->dentry->d_inode && S_ISDIR(path->dentry->d_inode->i_mode)) + /* + * I don't check directories here because mkdir() and rmdir() + * don't call me. + */ + return 0; + buf = tomoyo_get_path(path); + if (!buf) + goto out; + error = 0; + /* + * If the filename is specified by "deny_rewrite" keyword, + * we need to check "allow_rewrite" permission when the filename is not + * opened for append mode or the filename is truncated at open time. + */ + if ((acc_mode & MAY_WRITE) && + ((flag & O_TRUNC) || !(flag & O_APPEND)) && + (tomoyo_is_no_rewrite_file(buf))) { + error = tomoyo_check_single_path_permission2(domain, + TOMOYO_TYPE_REWRITE_ACL, + buf, mode); + } + if (!error) + error = tomoyo_check_file_perm2(domain, buf, acc_mode, "open", + mode); + if (!error && (flag & O_TRUNC)) + error = tomoyo_check_single_path_permission2(domain, + TOMOYO_TYPE_TRUNCATE_ACL, + buf, mode); + out: + tomoyo_free(buf); + if (!is_enforce) + error = 0; + return error; +} + +/** + * tomoyo_check_1path_perm - Check permission for "create", "unlink", "mkdir", "rmdir", "mkfifo", "mksock", "mkblock", "mkchar", "truncate" and "symlink". + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @operation: Type of operation. + * @path: Pointer to "struct path". + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_check_1path_perm(struct tomoyo_domain_info *domain, + const u8 operation, struct path *path) +{ + int error = -ENOMEM; + struct tomoyo_path_info *buf; + const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); + const bool is_enforce = (mode == 3); + + if (!mode || !path->mnt) + return 0; + buf = tomoyo_get_path(path); + if (!buf) + goto out; + switch (operation) { + case TOMOYO_TYPE_MKDIR_ACL: + case TOMOYO_TYPE_RMDIR_ACL: + if (!buf->is_dir) { + /* + * tomoyo_get_path() reserves space for appending "/." + */ + strcat((char *) buf->name, "/"); + tomoyo_fill_path_info(buf); + } + } + error = tomoyo_check_single_path_permission2(domain, operation, buf, + mode); + out: + tomoyo_free(buf); + if (!is_enforce) + error = 0; + return error; +} + +/** + * tomoyo_check_rewrite_permission - Check permission for "rewrite". + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @filp: Pointer to "struct file". + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_check_rewrite_permission(struct tomoyo_domain_info *domain, + struct file *filp) +{ + int error = -ENOMEM; + const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); + const bool is_enforce = (mode == 3); + struct tomoyo_path_info *buf; + + if (!mode || !filp->f_path.mnt) + return 0; + buf = tomoyo_get_path(&filp->f_path); + if (!buf) + goto out; + if (!tomoyo_is_no_rewrite_file(buf)) { + error = 0; + goto out; + } + error = tomoyo_check_single_path_permission2(domain, + TOMOYO_TYPE_REWRITE_ACL, + buf, mode); + out: + tomoyo_free(buf); + if (!is_enforce) + error = 0; + return error; +} + +/** + * tomoyo_check_2path_perm - Check permission for "rename" and "link". + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @operation: Type of operation. + * @path1: Pointer to "struct path". + * @path2: Pointer to "struct path". + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_check_2path_perm(struct tomoyo_domain_info * const domain, + const u8 operation, struct path *path1, + struct path *path2) +{ + int error = -ENOMEM; + struct tomoyo_path_info *buf1, *buf2; + const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE); + const bool is_enforce = (mode == 3); + const char *msg; + + if (!mode || !path1->mnt || !path2->mnt) + return 0; + buf1 = tomoyo_get_path(path1); + buf2 = tomoyo_get_path(path2); + if (!buf1 || !buf2) + goto out; + { + struct dentry *dentry = path1->dentry; + if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) { + /* + * tomoyo_get_path() reserves space for appending "/." + */ + if (!buf1->is_dir) { + strcat((char *) buf1->name, "/"); + tomoyo_fill_path_info(buf1); + } + if (!buf2->is_dir) { + strcat((char *) buf2->name, "/"); + tomoyo_fill_path_info(buf2); + } + } + } + error = tomoyo_check_double_path_acl(domain, operation, buf1, buf2); + msg = tomoyo_dp2keyword(operation); + if (!error) + goto out; + if (tomoyo_verbose_mode(domain)) + printk(KERN_WARNING "TOMOYO-%s: Access '%s %s %s' " + "denied for %s\n", tomoyo_get_msg(is_enforce), + msg, buf1->name, buf2->name, + tomoyo_get_last_name(domain)); + if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) { + const char *name1 = tomoyo_get_file_pattern(buf1)->name; + const char *name2 = tomoyo_get_file_pattern(buf2)->name; + tomoyo_update_double_path_acl(operation, name1, name2, domain, + false); + } + out: + tomoyo_free(buf1); + tomoyo_free(buf2); + if (!is_enforce) + error = 0; + return error; +} -- cgit v1.2.3 From 26a2a1c9eb88d9aca8891575b3b986812e073872 Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:15 +0900 Subject: Domain transition handler. This file controls domain creation/deletion/transition. Every process belongs to a domain in TOMOYO Linux. Domain transition occurs when execve(2) is called and the domain is expressed as 'process invocation history', such as ' /sbin/init /etc/init.d/rc'. Domain information is stored in current->cred->security field. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/domain.c | 878 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 878 insertions(+) create mode 100644 security/tomoyo/domain.c diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c new file mode 100644 index 000000000000..92af8f50e0fa --- /dev/null +++ b/security/tomoyo/domain.c @@ -0,0 +1,878 @@ +/* + * security/tomoyo/domain.c + * + * Implementation of the Domain-Based Mandatory Access Control. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#include "common.h" +#include "tomoyo.h" +#include "realpath.h" +#include + +/* Variables definitions.*/ + +/* The initial domain. */ +struct tomoyo_domain_info tomoyo_kernel_domain; + +/* The list for "struct tomoyo_domain_info". */ +LIST_HEAD(tomoyo_domain_list); +DECLARE_RWSEM(tomoyo_domain_list_lock); + +/* Structure for "initialize_domain" and "no_initialize_domain" keyword. */ +struct tomoyo_domain_initializer_entry { + struct list_head list; + const struct tomoyo_path_info *domainname; /* This may be NULL */ + const struct tomoyo_path_info *program; + bool is_deleted; + bool is_not; /* True if this entry is "no_initialize_domain". */ + /* True if the domainname is tomoyo_get_last_name(). */ + bool is_last_name; +}; + +/* Structure for "keep_domain" and "no_keep_domain" keyword. */ +struct tomoyo_domain_keeper_entry { + struct list_head list; + const struct tomoyo_path_info *domainname; + const struct tomoyo_path_info *program; /* This may be NULL */ + bool is_deleted; + bool is_not; /* True if this entry is "no_keep_domain". */ + /* True if the domainname is tomoyo_get_last_name(). */ + bool is_last_name; +}; + +/* Structure for "alias" keyword. */ +struct tomoyo_alias_entry { + struct list_head list; + const struct tomoyo_path_info *original_name; + const struct tomoyo_path_info *aliased_name; + bool is_deleted; +}; + +/** + * tomoyo_set_domain_flag - Set or clear domain's attribute flags. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * @is_delete: True if it is a delete request. + * @flags: Flags to set or clear. + * + * Returns nothing. + */ +void tomoyo_set_domain_flag(struct tomoyo_domain_info *domain, + const bool is_delete, const u8 flags) +{ + /* We need to serialize because this is bitfield operation. */ + static DEFINE_SPINLOCK(lock); + /***** CRITICAL SECTION START *****/ + spin_lock(&lock); + if (!is_delete) + domain->flags |= flags; + else + domain->flags &= ~flags; + spin_unlock(&lock); + /***** CRITICAL SECTION END *****/ +} + +/** + * tomoyo_get_last_name - Get last component of a domainname. + * + * @domain: Pointer to "struct tomoyo_domain_info". + * + * Returns the last component of the domainname. + */ +const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain) +{ + const char *cp0 = domain->domainname->name; + const char *cp1 = strrchr(cp0, ' '); + + if (cp1) + return cp1 + 1; + return cp0; +} + +/* The list for "struct tomoyo_domain_initializer_entry". */ +static LIST_HEAD(tomoyo_domain_initializer_list); +static DECLARE_RWSEM(tomoyo_domain_initializer_list_lock); + +/** + * tomoyo_update_domain_initializer_entry - Update "struct tomoyo_domain_initializer_entry" list. + * + * @domainname: The name of domain. May be NULL. + * @program: The name of program. + * @is_not: True if it is "no_initialize_domain" entry. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_domain_initializer_entry(const char *domainname, + const char *program, + const bool is_not, + const bool is_delete) +{ + struct tomoyo_domain_initializer_entry *new_entry; + struct tomoyo_domain_initializer_entry *ptr; + const struct tomoyo_path_info *saved_program; + const struct tomoyo_path_info *saved_domainname = NULL; + int error = -ENOMEM; + bool is_last_name = false; + + if (!tomoyo_is_correct_path(program, 1, -1, -1, __func__)) + return -EINVAL; /* No patterns allowed. */ + if (domainname) { + if (!tomoyo_is_domain_def(domainname) && + tomoyo_is_correct_path(domainname, 1, -1, -1, __func__)) + is_last_name = true; + else if (!tomoyo_is_correct_domain(domainname, __func__)) + return -EINVAL; + saved_domainname = tomoyo_save_name(domainname); + if (!saved_domainname) + return -ENOMEM; + } + saved_program = tomoyo_save_name(program); + if (!saved_program) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_initializer_list_lock); + list_for_each_entry(ptr, &tomoyo_domain_initializer_list, list) { + if (ptr->is_not != is_not || + ptr->domainname != saved_domainname || + ptr->program != saved_program) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->domainname = saved_domainname; + new_entry->program = saved_program; + new_entry->is_not = is_not; + new_entry->is_last_name = is_last_name; + list_add_tail(&new_entry->list, &tomoyo_domain_initializer_list); + error = 0; + out: + up_write(&tomoyo_domain_initializer_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_read_domain_initializer_policy - Read "struct tomoyo_domain_initializer_entry" list. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns true on success, false otherwise. + */ +bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + down_read(&tomoyo_domain_initializer_list_lock); + list_for_each_cookie(pos, head->read_var2, + &tomoyo_domain_initializer_list) { + const char *no; + const char *from = ""; + const char *domain = ""; + struct tomoyo_domain_initializer_entry *ptr; + ptr = list_entry(pos, struct tomoyo_domain_initializer_entry, + list); + if (ptr->is_deleted) + continue; + no = ptr->is_not ? "no_" : ""; + if (ptr->domainname) { + from = " from "; + domain = ptr->domainname->name; + } + if (!tomoyo_io_printf(head, + "%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN + "%s%s%s\n", no, ptr->program->name, from, + domain)) { + done = false; + break; + } + } + up_read(&tomoyo_domain_initializer_list_lock); + return done; +} + +/** + * tomoyo_write_domain_initializer_policy - Write "struct tomoyo_domain_initializer_entry" list. + * + * @data: String to parse. + * @is_not: True if it is "no_initialize_domain" entry. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_write_domain_initializer_policy(char *data, const bool is_not, + const bool is_delete) +{ + char *cp = strstr(data, " from "); + + if (cp) { + *cp = '\0'; + return tomoyo_update_domain_initializer_entry(cp + 6, data, + is_not, + is_delete); + } + return tomoyo_update_domain_initializer_entry(NULL, data, is_not, + is_delete); +} + +/** + * tomoyo_is_domain_initializer - Check whether the given program causes domainname reinitialization. + * + * @domainname: The name of domain. + * @program: The name of program. + * @last_name: The last component of @domainname. + * + * Returns true if executing @program reinitializes domain transition, + * false otherwise. + */ +static bool tomoyo_is_domain_initializer(const struct tomoyo_path_info * + domainname, + const struct tomoyo_path_info *program, + const struct tomoyo_path_info * + last_name) +{ + struct tomoyo_domain_initializer_entry *ptr; + bool flag = false; + + down_read(&tomoyo_domain_initializer_list_lock); + list_for_each_entry(ptr, &tomoyo_domain_initializer_list, list) { + if (ptr->is_deleted) + continue; + if (ptr->domainname) { + if (!ptr->is_last_name) { + if (ptr->domainname != domainname) + continue; + } else { + if (tomoyo_pathcmp(ptr->domainname, last_name)) + continue; + } + } + if (tomoyo_pathcmp(ptr->program, program)) + continue; + if (ptr->is_not) { + flag = false; + break; + } + flag = true; + } + up_read(&tomoyo_domain_initializer_list_lock); + return flag; +} + +/* The list for "struct tomoyo_domain_keeper_entry". */ +static LIST_HEAD(tomoyo_domain_keeper_list); +static DECLARE_RWSEM(tomoyo_domain_keeper_list_lock); + +/** + * tomoyo_update_domain_keeper_entry - Update "struct tomoyo_domain_keeper_entry" list. + * + * @domainname: The name of domain. + * @program: The name of program. May be NULL. + * @is_not: True if it is "no_keep_domain" entry. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_domain_keeper_entry(const char *domainname, + const char *program, + const bool is_not, + const bool is_delete) +{ + struct tomoyo_domain_keeper_entry *new_entry; + struct tomoyo_domain_keeper_entry *ptr; + const struct tomoyo_path_info *saved_domainname; + const struct tomoyo_path_info *saved_program = NULL; + static DEFINE_MUTEX(lock); + int error = -ENOMEM; + bool is_last_name = false; + + if (!tomoyo_is_domain_def(domainname) && + tomoyo_is_correct_path(domainname, 1, -1, -1, __func__)) + is_last_name = true; + else if (!tomoyo_is_correct_domain(domainname, __func__)) + return -EINVAL; + if (program) { + if (!tomoyo_is_correct_path(program, 1, -1, -1, __func__)) + return -EINVAL; + saved_program = tomoyo_save_name(program); + if (!saved_program) + return -ENOMEM; + } + saved_domainname = tomoyo_save_name(domainname); + if (!saved_domainname) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_keeper_list_lock); + list_for_each_entry(ptr, &tomoyo_domain_keeper_list, list) { + if (ptr->is_not != is_not || + ptr->domainname != saved_domainname || + ptr->program != saved_program) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->domainname = saved_domainname; + new_entry->program = saved_program; + new_entry->is_not = is_not; + new_entry->is_last_name = is_last_name; + list_add_tail(&new_entry->list, &tomoyo_domain_keeper_list); + error = 0; + out: + up_write(&tomoyo_domain_keeper_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_write_domain_keeper_policy - Write "struct tomoyo_domain_keeper_entry" list. + * + * @data: String to parse. + * @is_not: True if it is "no_keep_domain" entry. + * @is_delete: True if it is a delete request. + * + */ +int tomoyo_write_domain_keeper_policy(char *data, const bool is_not, + const bool is_delete) +{ + char *cp = strstr(data, " from "); + + if (cp) { + *cp = '\0'; + return tomoyo_update_domain_keeper_entry(cp + 6, data, is_not, + is_delete); + } + return tomoyo_update_domain_keeper_entry(data, NULL, is_not, is_delete); +} + +/** + * tomoyo_read_domain_keeper_policy - Read "struct tomoyo_domain_keeper_entry" list. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns true on success, false otherwise. + */ +bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = false; + + down_read(&tomoyo_domain_keeper_list_lock); + list_for_each_cookie(pos, head->read_var2, + &tomoyo_domain_keeper_list) { + struct tomoyo_domain_keeper_entry *ptr; + const char *no; + const char *from = ""; + const char *program = ""; + + ptr = list_entry(pos, struct tomoyo_domain_keeper_entry, list); + if (ptr->is_deleted) + continue; + no = ptr->is_not ? "no_" : ""; + if (ptr->program) { + from = " from "; + program = ptr->program->name; + } + if (!tomoyo_io_printf(head, + "%s" TOMOYO_KEYWORD_KEEP_DOMAIN + "%s%s%s\n", no, program, from, + ptr->domainname->name)) { + done = false; + break; + } + } + up_read(&tomoyo_domain_keeper_list_lock); + return done; +} + +/** + * tomoyo_is_domain_keeper - Check whether the given program causes domain transition suppression. + * + * @domainname: The name of domain. + * @program: The name of program. + * @last_name: The last component of @domainname. + * + * Returns true if executing @program supresses domain transition, + * false otherwise. + */ +static bool tomoyo_is_domain_keeper(const struct tomoyo_path_info *domainname, + const struct tomoyo_path_info *program, + const struct tomoyo_path_info *last_name) +{ + struct tomoyo_domain_keeper_entry *ptr; + bool flag = false; + + down_read(&tomoyo_domain_keeper_list_lock); + list_for_each_entry(ptr, &tomoyo_domain_keeper_list, list) { + if (ptr->is_deleted) + continue; + if (!ptr->is_last_name) { + if (ptr->domainname != domainname) + continue; + } else { + if (tomoyo_pathcmp(ptr->domainname, last_name)) + continue; + } + if (ptr->program && tomoyo_pathcmp(ptr->program, program)) + continue; + if (ptr->is_not) { + flag = false; + break; + } + flag = true; + } + up_read(&tomoyo_domain_keeper_list_lock); + return flag; +} + +/* The list for "struct tomoyo_alias_entry". */ +static LIST_HEAD(tomoyo_alias_list); +static DECLARE_RWSEM(tomoyo_alias_list_lock); + +/** + * tomoyo_update_alias_entry - Update "struct tomoyo_alias_entry" list. + * + * @original_name: The original program's real name. + * @aliased_name: The symbolic program's symbolic link's name. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +static int tomoyo_update_alias_entry(const char *original_name, + const char *aliased_name, + const bool is_delete) +{ + struct tomoyo_alias_entry *new_entry; + struct tomoyo_alias_entry *ptr; + const struct tomoyo_path_info *saved_original_name; + const struct tomoyo_path_info *saved_aliased_name; + int error = -ENOMEM; + + if (!tomoyo_is_correct_path(original_name, 1, -1, -1, __func__) || + !tomoyo_is_correct_path(aliased_name, 1, -1, -1, __func__)) + return -EINVAL; /* No patterns allowed. */ + saved_original_name = tomoyo_save_name(original_name); + saved_aliased_name = tomoyo_save_name(aliased_name); + if (!saved_original_name || !saved_aliased_name) + return -ENOMEM; + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_alias_list_lock); + list_for_each_entry(ptr, &tomoyo_alias_list, list) { + if (ptr->original_name != saved_original_name || + ptr->aliased_name != saved_aliased_name) + continue; + ptr->is_deleted = is_delete; + error = 0; + goto out; + } + if (is_delete) { + error = -ENOENT; + goto out; + } + new_entry = tomoyo_alloc_element(sizeof(*new_entry)); + if (!new_entry) + goto out; + new_entry->original_name = saved_original_name; + new_entry->aliased_name = saved_aliased_name; + list_add_tail(&new_entry->list, &tomoyo_alias_list); + error = 0; + out: + up_write(&tomoyo_alias_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return error; +} + +/** + * tomoyo_read_alias_policy - Read "struct tomoyo_alias_entry" list. + * + * @head: Pointer to "struct tomoyo_io_buffer". + * + * Returns true on success, false otherwise. + */ +bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head) +{ + struct list_head *pos; + bool done = true; + + down_read(&tomoyo_alias_list_lock); + list_for_each_cookie(pos, head->read_var2, &tomoyo_alias_list) { + struct tomoyo_alias_entry *ptr; + + ptr = list_entry(pos, struct tomoyo_alias_entry, list); + if (ptr->is_deleted) + continue; + if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n", + ptr->original_name->name, + ptr->aliased_name->name)) { + done = false; + break; + } + } + up_read(&tomoyo_alias_list_lock); + return done; +} + +/** + * tomoyo_write_alias_policy - Write "struct tomoyo_alias_entry" list. + * + * @data: String to parse. + * @is_delete: True if it is a delete request. + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_write_alias_policy(char *data, const bool is_delete) +{ + char *cp = strchr(data, ' '); + + if (!cp) + return -EINVAL; + *cp++ = '\0'; + return tomoyo_update_alias_entry(data, cp, is_delete); +} + +/* Domain create/delete/undelete handler. */ + +/* #define TOMOYO_DEBUG_DOMAIN_UNDELETE */ + +/** + * tomoyo_delete_domain - Delete a domain. + * + * @domainname: The name of domain. + * + * Returns 0. + */ +int tomoyo_delete_domain(char *domainname) +{ + struct tomoyo_domain_info *domain; + struct tomoyo_path_info name; + + name.name = domainname; + tomoyo_fill_path_info(&name); + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_list_lock); +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + printk(KERN_DEBUG "tomoyo_delete_domain %s\n", domainname); + list_for_each_entry(domain, &tomoyo_domain_list, list) { + if (tomoyo_pathcmp(domain->domainname, &name)) + continue; + printk(KERN_DEBUG "List: %p %u\n", domain, domain->is_deleted); + } +#endif + /* Is there an active domain? */ + list_for_each_entry(domain, &tomoyo_domain_list, list) { + struct tomoyo_domain_info *domain2; + /* Never delete tomoyo_kernel_domain */ + if (domain == &tomoyo_kernel_domain) + continue; + if (domain->is_deleted || + tomoyo_pathcmp(domain->domainname, &name)) + continue; + /* Mark already deleted domains as non undeletable. */ + list_for_each_entry(domain2, &tomoyo_domain_list, list) { + if (!domain2->is_deleted || + tomoyo_pathcmp(domain2->domainname, &name)) + continue; +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + if (domain2->is_deleted != 255) + printk(KERN_DEBUG + "Marked %p as non undeletable\n", + domain2); +#endif + domain2->is_deleted = 255; + } + /* Delete and mark active domain as undeletable. */ + domain->is_deleted = 1; +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + printk(KERN_DEBUG "Marked %p as undeletable\n", domain); +#endif + break; + } + up_write(&tomoyo_domain_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return 0; +} + +/** + * tomoyo_undelete_domain - Undelete a domain. + * + * @domainname: The name of domain. + * + * Returns pointer to "struct tomoyo_domain_info" on success, NULL otherwise. + */ +struct tomoyo_domain_info *tomoyo_undelete_domain(const char *domainname) +{ + struct tomoyo_domain_info *domain; + struct tomoyo_domain_info *candidate_domain = NULL; + struct tomoyo_path_info name; + + name.name = domainname; + tomoyo_fill_path_info(&name); + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_list_lock); +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + printk(KERN_DEBUG "tomoyo_undelete_domain %s\n", domainname); + list_for_each_entry(domain, &tomoyo_domain_list, list) { + if (tomoyo_pathcmp(domain->domainname, &name)) + continue; + printk(KERN_DEBUG "List: %p %u\n", domain, domain->is_deleted); + } +#endif + list_for_each_entry(domain, &tomoyo_domain_list, list) { + if (tomoyo_pathcmp(&name, domain->domainname)) + continue; + if (!domain->is_deleted) { + /* This domain is active. I can't undelete. */ + candidate_domain = NULL; +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + printk(KERN_DEBUG "%p is active. I can't undelete.\n", + domain); +#endif + break; + } + /* Is this domain undeletable? */ + if (domain->is_deleted == 1) + candidate_domain = domain; + } + if (candidate_domain) { + candidate_domain->is_deleted = 0; +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + printk(KERN_DEBUG "%p was undeleted.\n", candidate_domain); +#endif + } + up_write(&tomoyo_domain_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return candidate_domain; +} + +/** + * tomoyo_find_or_assign_new_domain - Create a domain. + * + * @domainname: The name of domain. + * @profile: Profile number to assign if the domain was newly created. + * + * Returns pointer to "struct tomoyo_domain_info" on success, NULL otherwise. + */ +struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char * + domainname, + const u8 profile) +{ + struct tomoyo_domain_info *domain = NULL; + const struct tomoyo_path_info *saved_domainname; + + /***** EXCLUSIVE SECTION START *****/ + down_write(&tomoyo_domain_list_lock); + domain = tomoyo_find_domain(domainname); + if (domain) + goto out; + if (!tomoyo_is_correct_domain(domainname, __func__)) + goto out; + saved_domainname = tomoyo_save_name(domainname); + if (!saved_domainname) + goto out; + /* Can I reuse memory of deleted domain? */ + list_for_each_entry(domain, &tomoyo_domain_list, list) { + struct task_struct *p; + struct tomoyo_acl_info *ptr; + bool flag; + if (!domain->is_deleted || + domain->domainname != saved_domainname) + continue; + flag = false; + /***** CRITICAL SECTION START *****/ + read_lock(&tasklist_lock); + for_each_process(p) { + if (tomoyo_real_domain(p) != domain) + continue; + flag = true; + break; + } + read_unlock(&tasklist_lock); + /***** CRITICAL SECTION END *****/ + if (flag) + continue; +#ifdef TOMOYO_DEBUG_DOMAIN_UNDELETE + printk(KERN_DEBUG "Reusing %p %s\n", domain, + domain->domainname->name); +#endif + list_for_each_entry(ptr, &domain->acl_info_list, list) { + ptr->type |= TOMOYO_ACL_DELETED; + } + tomoyo_set_domain_flag(domain, true, domain->flags); + domain->profile = profile; + domain->quota_warned = false; + mb(); /* Avoid out-of-order execution. */ + domain->is_deleted = 0; + goto out; + } + /* No memory reusable. Create using new memory. */ + domain = tomoyo_alloc_element(sizeof(*domain)); + if (domain) { + INIT_LIST_HEAD(&domain->acl_info_list); + domain->domainname = saved_domainname; + domain->profile = profile; + list_add_tail(&domain->list, &tomoyo_domain_list); + } + out: + up_write(&tomoyo_domain_list_lock); + /***** EXCLUSIVE SECTION END *****/ + return domain; +} + +/** + * tomoyo_find_next_domain - Find a domain. + * + * @bprm: Pointer to "struct linux_binprm". + * @next_domain: Pointer to pointer to "struct tomoyo_domain_info". + * + * Returns 0 on success, negative value otherwise. + */ +int tomoyo_find_next_domain(struct linux_binprm *bprm, + struct tomoyo_domain_info **next_domain) +{ + /* + * This function assumes that the size of buffer returned by + * tomoyo_realpath() = TOMOYO_MAX_PATHNAME_LEN. + */ + struct tomoyo_page_buffer *tmp = tomoyo_alloc(sizeof(*tmp)); + struct tomoyo_domain_info *old_domain = tomoyo_domain(); + struct tomoyo_domain_info *domain = NULL; + const char *old_domain_name = old_domain->domainname->name; + const char *original_name = bprm->filename; + char *new_domain_name = NULL; + char *real_program_name = NULL; + char *symlink_program_name = NULL; + const u8 mode = tomoyo_check_flags(old_domain, TOMOYO_MAC_FOR_FILE); + const bool is_enforce = (mode == 3); + int retval = -ENOMEM; + struct tomoyo_path_info r; /* real name */ + struct tomoyo_path_info s; /* symlink name */ + struct tomoyo_path_info l; /* last name */ + static bool initialized; + + if (!tmp) + goto out; + + if (!initialized) { + /* + * Built-in initializers. This is needed because policies are + * not loaded until starting /sbin/init. + */ + tomoyo_update_domain_initializer_entry(NULL, "/sbin/hotplug", + false, false); + tomoyo_update_domain_initializer_entry(NULL, "/sbin/modprobe", + false, false); + initialized = true; + } + + /* Get tomoyo_realpath of program. */ + retval = -ENOENT; + /* I hope tomoyo_realpath() won't fail with -ENOMEM. */ + real_program_name = tomoyo_realpath(original_name); + if (!real_program_name) + goto out; + /* Get tomoyo_realpath of symbolic link. */ + symlink_program_name = tomoyo_realpath_nofollow(original_name); + if (!symlink_program_name) + goto out; + + r.name = real_program_name; + tomoyo_fill_path_info(&r); + s.name = symlink_program_name; + tomoyo_fill_path_info(&s); + l.name = tomoyo_get_last_name(old_domain); + tomoyo_fill_path_info(&l); + + /* Check 'alias' directive. */ + if (tomoyo_pathcmp(&r, &s)) { + struct tomoyo_alias_entry *ptr; + /* Is this program allowed to be called via symbolic links? */ + down_read(&tomoyo_alias_list_lock); + list_for_each_entry(ptr, &tomoyo_alias_list, list) { + if (ptr->is_deleted || + tomoyo_pathcmp(&r, ptr->original_name) || + tomoyo_pathcmp(&s, ptr->aliased_name)) + continue; + memset(real_program_name, 0, TOMOYO_MAX_PATHNAME_LEN); + strncpy(real_program_name, ptr->aliased_name->name, + TOMOYO_MAX_PATHNAME_LEN - 1); + tomoyo_fill_path_info(&r); + break; + } + up_read(&tomoyo_alias_list_lock); + } + + /* Check execute permission. */ + retval = tomoyo_check_exec_perm(old_domain, &r, tmp); + if (retval < 0) + goto out; + + new_domain_name = tmp->buffer; + if (tomoyo_is_domain_initializer(old_domain->domainname, &r, &l)) { + /* Transit to the child of tomoyo_kernel_domain domain. */ + snprintf(new_domain_name, TOMOYO_MAX_PATHNAME_LEN + 1, + TOMOYO_ROOT_NAME " " "%s", real_program_name); + } else if (old_domain == &tomoyo_kernel_domain && + !tomoyo_policy_loaded) { + /* + * Needn't to transit from kernel domain before starting + * /sbin/init. But transit from kernel domain if executing + * initializers because they might start before /sbin/init. + */ + domain = old_domain; + } else if (tomoyo_is_domain_keeper(old_domain->domainname, &r, &l)) { + /* Keep current domain. */ + domain = old_domain; + } else { + /* Normal domain transition. */ + snprintf(new_domain_name, TOMOYO_MAX_PATHNAME_LEN + 1, + "%s %s", old_domain_name, real_program_name); + } + if (domain || strlen(new_domain_name) >= TOMOYO_MAX_PATHNAME_LEN) + goto done; + down_read(&tomoyo_domain_list_lock); + domain = tomoyo_find_domain(new_domain_name); + up_read(&tomoyo_domain_list_lock); + if (domain) + goto done; + if (is_enforce) + goto done; + domain = tomoyo_find_or_assign_new_domain(new_domain_name, + old_domain->profile); + done: + if (domain) + goto out; + printk(KERN_WARNING "TOMOYO-ERROR: Domain '%s' not defined.\n", + new_domain_name); + if (is_enforce) + retval = -EPERM; + else + tomoyo_set_domain_flag(old_domain, false, + TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED); + out: + tomoyo_free(real_program_name); + tomoyo_free(symlink_program_name); + *next_domain = domain ? domain : old_domain; + tomoyo_free(tmp); + return retval; +} -- cgit v1.2.3 From f7433243770c77979c396b4c7449a10e9b3521db Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:16 +0900 Subject: LSM adapter functions. DAC's permissions and TOMOYO's permissions are not one-to-one mapping. Regarding DAC, there are "read", "write", "execute" permissions. Regarding TOMOYO, there are "allow_read", "allow_write", "allow_read/write", "allow_execute", "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir", "allow_mkfifo", "allow_mksock", "allow_mkblock", "allow_mkchar", "allow_truncate", "allow_symlink", "allow_rewrite", "allow_link", "allow_rename" permissions. +----------------------------------+----------------------------------+ | requested operation | required TOMOYO's permission | +----------------------------------+----------------------------------+ | sys_open(O_RDONLY) | allow_read | +----------------------------------+----------------------------------+ | sys_open(O_WRONLY) | allow_write | +----------------------------------+----------------------------------+ | sys_open(O_RDWR) | allow_read/write | +----------------------------------+----------------------------------+ | open_exec() from do_execve() | allow_execute | +----------------------------------+----------------------------------+ | open_exec() from !do_execve() | allow_read | +----------------------------------+----------------------------------+ | sys_read() | (none) | +----------------------------------+----------------------------------+ | sys_write() | (none) | +----------------------------------+----------------------------------+ | sys_mmap() | (none) | +----------------------------------+----------------------------------+ | sys_uselib() | allow_read | +----------------------------------+----------------------------------+ | sys_open(O_CREAT) | allow_create | +----------------------------------+----------------------------------+ | sys_open(O_TRUNC) | allow_truncate | +----------------------------------+----------------------------------+ | sys_truncate() | allow_truncate | +----------------------------------+----------------------------------+ | sys_ftruncate() | allow_truncate | +----------------------------------+----------------------------------+ | sys_open() without O_APPEND | allow_rewrite | +----------------------------------+----------------------------------+ | setfl() without O_APPEND | allow_rewrite | +----------------------------------+----------------------------------+ | sys_sysctl() for writing | allow_write | +----------------------------------+----------------------------------+ | sys_sysctl() for reading | allow_read | +----------------------------------+----------------------------------+ | sys_unlink() | allow_unlink | +----------------------------------+----------------------------------+ | sys_mknod(S_IFREG) | allow_create | +----------------------------------+----------------------------------+ | sys_mknod(0) | allow_create | +----------------------------------+----------------------------------+ | sys_mknod(S_IFIFO) | allow_mkfifo | +----------------------------------+----------------------------------+ | sys_mknod(S_IFSOCK) | allow_mksock | +----------------------------------+----------------------------------+ | sys_bind(AF_UNIX) | allow_mksock | +----------------------------------+----------------------------------+ | sys_mknod(S_IFBLK) | allow_mkblock | +----------------------------------+----------------------------------+ | sys_mknod(S_IFCHR) | allow_mkchar | +----------------------------------+----------------------------------+ | sys_symlink() | allow_symlink | +----------------------------------+----------------------------------+ | sys_mkdir() | allow_mkdir | +----------------------------------+----------------------------------+ | sys_rmdir() | allow_rmdir | +----------------------------------+----------------------------------+ | sys_link() | allow_link | +----------------------------------+----------------------------------+ | sys_rename() | allow_rename | +----------------------------------+----------------------------------+ TOMOYO requires "allow_execute" permission of a pathname passed to do_execve() but does not require "allow_read" permission of that pathname. Let's consider 3 patterns (statically linked, dynamically linked, shell script). This description is to some degree simplified. $ cat hello.c #include int main() { printf("Hello\n"); return 0; } $ cat hello.sh #! /bin/sh echo "Hello" $ gcc -static -o hello-static hello.c $ gcc -o hello-dynamic hello.c $ chmod 755 hello.sh Case 1 -- Executing hello-static from bash. (1) The bash process calls fork() and the child process requests do_execve("hello-static"). (2) The kernel checks "allow_execute hello-static" from "bash" domain. (3) The kernel calculates "bash hello-static" as the domain to transit to. (4) The kernel overwrites the child process by "hello-static". (5) The child process transits to "bash hello-static" domain. (6) The "hello-static" starts and finishes. Case 2 -- Executing hello-dynamic from bash. (1) The bash process calls fork() and the child process requests do_execve("hello-dynamic"). (2) The kernel checks "allow_execute hello-dynamic" from "bash" domain. (3) The kernel calculates "bash hello-dynamic" as the domain to transit to. (4) The kernel checks "allow_read ld-linux.so" from "bash hello-dynamic" domain. I think permission to access ld-linux.so should be charged hello-dynamic program, for "hello-dynamic needs ld-linux.so" is not a fault of bash program. (5) The kernel overwrites the child process by "hello-dynamic". (6) The child process transits to "bash hello-dynamic" domain. (7) The "hello-dynamic" starts and finishes. Case 3 -- Executing hello.sh from bash. (1) The bash process calls fork() and the child process requests do_execve("hello.sh"). (2) The kernel checks "allow_execute hello.sh" from "bash" domain. (3) The kernel calculates "bash hello.sh" as the domain to transit to. (4) The kernel checks "allow_read /bin/sh" from "bash hello.sh" domain. I think permission to access /bin/sh should be charged hello.sh program, for "hello.sh needs /bin/sh" is not a fault of bash program. (5) The kernel overwrites the child process by "/bin/sh". (6) The child process transits to "bash hello.sh" domain. (7) The "/bin/sh" requests open("hello.sh"). (8) The kernel checks "allow_read hello.sh" from "bash hello.sh" domain. (9) The "/bin/sh" starts and finishes. Whether a file is interpreted as a program or not depends on an application. The kernel cannot know whether the file is interpreted as a program or not. Thus, TOMOYO treats "hello-static" "hello-dynamic" "ld-linux.so" "hello.sh" "/bin/sh" equally as merely files; no distinction between executable and non-executable. Therefore, TOMOYO doesn't check DAC's execute permission. TOMOYO checks "allow_read" permission instead. Calling do_execve() is a bold gesture that an old program's instance (i.e. current process) is ready to be overwritten by a new program and is ready to transfer control to the new program. To split purview of programs, TOMOYO requires "allow_execute" permission of the new program against the old program's instance and performs domain transition. If do_execve() succeeds, the old program is no longer responsible against the consequence of the new program's behavior. Only the new program is responsible for all consequences. But TOMOYO doesn't require "allow_read" permission of the new program. If TOMOYO requires "allow_read" permission of the new program, TOMOYO will allow an attacker (who hijacked the old program's instance) to open the new program and steal data from the new program. Requiring "allow_read" permission will widen purview of the old program. Not requiring "allow_read" permission of the new program against the old program's instance is my design for reducing purview of the old program. To be able to know whether the current process is in do_execve() or not, I want to add in_execve flag to "task_struct". Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/tomoyo.c | 293 +++++++++++++++++++++++++++++++++++++++++++++++ security/tomoyo/tomoyo.h | 106 +++++++++++++++++ 2 files changed, 399 insertions(+) create mode 100644 security/tomoyo/tomoyo.c create mode 100644 security/tomoyo/tomoyo.h diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c new file mode 100644 index 000000000000..f3ab20758c0f --- /dev/null +++ b/security/tomoyo/tomoyo.c @@ -0,0 +1,293 @@ +/* + * security/tomoyo/tomoyo.c + * + * LSM hooks for TOMOYO Linux. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#include +#include "common.h" +#include "tomoyo.h" +#include "realpath.h" + +static int tomoyo_cred_prepare(struct cred *new, const struct cred *old, + gfp_t gfp) +{ + /* + * Since "struct tomoyo_domain_info *" is a sharable pointer, + * we don't need to duplicate. + */ + new->security = old->security; + return 0; +} + +static int tomoyo_bprm_set_creds(struct linux_binprm *bprm) +{ + /* + * Do only if this function is called for the first time of an execve + * operation. + */ + if (bprm->cred_prepared) + return 0; + /* + * Load policy if /sbin/tomoyo-init exists and /sbin/init is requested + * for the first time. + */ + if (!tomoyo_policy_loaded) + tomoyo_load_policy(bprm->filename); + /* + * Tell tomoyo_bprm_check_security() is called for the first time of an + * execve operation. + */ + bprm->cred->security = NULL; + return 0; +} + +static int tomoyo_bprm_check_security(struct linux_binprm *bprm) +{ + struct tomoyo_domain_info *domain = bprm->cred->security; + + /* + * Execute permission is checked against pathname passed to do_execve() + * using current domain. + */ + if (!domain) { + struct tomoyo_domain_info *next_domain = NULL; + int retval = tomoyo_find_next_domain(bprm, &next_domain); + + if (!retval) + bprm->cred->security = next_domain; + return retval; + } + /* + * Read permission is checked against interpreters using next domain. + * '1' is the result of open_to_namei_flags(O_RDONLY). + */ + return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1); +} + +#ifdef CONFIG_SYSCTL + +static int tomoyo_prepend(char **buffer, int *buflen, const char *str) +{ + int namelen = strlen(str); + + if (*buflen < namelen) + return -ENOMEM; + *buflen -= namelen; + *buffer -= namelen; + memcpy(*buffer, str, namelen); + return 0; +} + +/** + * tomoyo_sysctl_path - return the realpath of a ctl_table. + * @table: pointer to "struct ctl_table". + * + * Returns realpath(3) of the @table on success. + * Returns NULL on failure. + * + * This function uses tomoyo_alloc(), so the caller must call tomoyo_free() + * if this function didn't return NULL. + */ +static char *tomoyo_sysctl_path(struct ctl_table *table) +{ + int buflen = TOMOYO_MAX_PATHNAME_LEN; + char *buf = tomoyo_alloc(buflen); + char *end = buf + buflen; + int error = -ENOMEM; + + if (!buf) + return NULL; + + *--end = '\0'; + buflen--; + while (table) { + char buf[32]; + const char *sp = table->procname; + + if (!sp) { + memset(buf, 0, sizeof(buf)); + snprintf(buf, sizeof(buf) - 1, "=%d=", table->ctl_name); + sp = buf; + } + if (tomoyo_prepend(&end, &buflen, sp) || + tomoyo_prepend(&end, &buflen, "/")) + goto out; + table = table->parent; + } + if (tomoyo_prepend(&end, &buflen, "/proc/sys")) + goto out; + error = tomoyo_encode(buf, end - buf, end); + out: + if (!error) + return buf; + tomoyo_free(buf); + return NULL; +} + +static int tomoyo_sysctl(struct ctl_table *table, int op) +{ + int error; + char *name; + + op &= MAY_READ | MAY_WRITE; + if (!op) + return 0; + name = tomoyo_sysctl_path(table); + if (!name) + return -ENOMEM; + error = tomoyo_check_file_perm(tomoyo_domain(), name, op); + tomoyo_free(name); + return error; +} +#endif + +static int tomoyo_path_truncate(struct path *path, loff_t length, + unsigned int time_attrs) +{ + return tomoyo_check_1path_perm(tomoyo_domain(), + TOMOYO_TYPE_TRUNCATE_ACL, + path); +} + +static int tomoyo_path_unlink(struct path *parent, struct dentry *dentry) +{ + struct path path = { parent->mnt, dentry }; + return tomoyo_check_1path_perm(tomoyo_domain(), + TOMOYO_TYPE_UNLINK_ACL, + &path); +} + +static int tomoyo_path_mkdir(struct path *parent, struct dentry *dentry, + int mode) +{ + struct path path = { parent->mnt, dentry }; + return tomoyo_check_1path_perm(tomoyo_domain(), + TOMOYO_TYPE_MKDIR_ACL, + &path); +} + +static int tomoyo_path_rmdir(struct path *parent, struct dentry *dentry) +{ + struct path path = { parent->mnt, dentry }; + return tomoyo_check_1path_perm(tomoyo_domain(), + TOMOYO_TYPE_RMDIR_ACL, + &path); +} + +static int tomoyo_path_symlink(struct path *parent, struct dentry *dentry, + const char *old_name) +{ + struct path path = { parent->mnt, dentry }; + return tomoyo_check_1path_perm(tomoyo_domain(), + TOMOYO_TYPE_SYMLINK_ACL, + &path); +} + +static int tomoyo_path_mknod(struct path *parent, struct dentry *dentry, + int mode, unsigned int dev) +{ + struct path path = { parent->mnt, dentry }; + int type = TOMOYO_TYPE_CREATE_ACL; + + switch (mode & S_IFMT) { + case S_IFCHR: + type = TOMOYO_TYPE_MKCHAR_ACL; + break; + case S_IFBLK: + type = TOMOYO_TYPE_MKBLOCK_ACL; + break; + case S_IFIFO: + type = TOMOYO_TYPE_MKFIFO_ACL; + break; + case S_IFSOCK: + type = TOMOYO_TYPE_MKSOCK_ACL; + break; + } + return tomoyo_check_1path_perm(tomoyo_domain(), + type, &path); +} + +static int tomoyo_path_link(struct dentry *old_dentry, struct path *new_dir, + struct dentry *new_dentry) +{ + struct path path1 = { new_dir->mnt, old_dentry }; + struct path path2 = { new_dir->mnt, new_dentry }; + return tomoyo_check_2path_perm(tomoyo_domain(), + TOMOYO_TYPE_LINK_ACL, + &path1, &path2); +} + +static int tomoyo_path_rename(struct path *old_parent, + struct dentry *old_dentry, + struct path *new_parent, + struct dentry *new_dentry) +{ + struct path path1 = { old_parent->mnt, old_dentry }; + struct path path2 = { new_parent->mnt, new_dentry }; + return tomoyo_check_2path_perm(tomoyo_domain(), + TOMOYO_TYPE_RENAME_ACL, + &path1, &path2); +} + +static int tomoyo_file_fcntl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + if (cmd == F_SETFL && ((arg ^ file->f_flags) & O_APPEND)) + return tomoyo_check_rewrite_permission(tomoyo_domain(), file); + return 0; +} + +static int tomoyo_dentry_open(struct file *f, const struct cred *cred) +{ + int flags = f->f_flags; + + if ((flags + 1) & O_ACCMODE) + flags++; + flags |= f->f_flags & (O_APPEND | O_TRUNC); + /* Don't check read permission here if called from do_execve(). */ + if (current->in_execve) + return 0; + return tomoyo_check_open_permission(tomoyo_domain(), &f->f_path, flags); +} + +static struct security_operations tomoyo_security_ops = { + .name = "tomoyo", + .cred_prepare = tomoyo_cred_prepare, + .bprm_set_creds = tomoyo_bprm_set_creds, + .bprm_check_security = tomoyo_bprm_check_security, +#ifdef CONFIG_SYSCTL + .sysctl = tomoyo_sysctl, +#endif + .file_fcntl = tomoyo_file_fcntl, + .dentry_open = tomoyo_dentry_open, + .path_truncate = tomoyo_path_truncate, + .path_unlink = tomoyo_path_unlink, + .path_mkdir = tomoyo_path_mkdir, + .path_rmdir = tomoyo_path_rmdir, + .path_symlink = tomoyo_path_symlink, + .path_mknod = tomoyo_path_mknod, + .path_link = tomoyo_path_link, + .path_rename = tomoyo_path_rename, +}; + +static int __init tomoyo_init(void) +{ + struct cred *cred = (struct cred *) current_cred(); + + if (!security_module_enable(&tomoyo_security_ops)) + return 0; + /* register ourselves with the security framework */ + if (register_security(&tomoyo_security_ops)) + panic("Failure registering TOMOYO Linux"); + printk(KERN_INFO "TOMOYO Linux initialized\n"); + cred->security = &tomoyo_kernel_domain; + return 0; +} + +security_initcall(tomoyo_init); diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h new file mode 100644 index 000000000000..a0c8f6e0bea4 --- /dev/null +++ b/security/tomoyo/tomoyo.h @@ -0,0 +1,106 @@ +/* + * security/tomoyo/tomoyo.h + * + * Implementation of the Domain-Based Mandatory Access Control. + * + * Copyright (C) 2005-2009 NTT DATA CORPORATION + * + * Version: 2.2.0-pre 2009/02/01 + * + */ + +#ifndef _SECURITY_TOMOYO_TOMOYO_H +#define _SECURITY_TOMOYO_TOMOYO_H + +struct tomoyo_path_info; +struct path; +struct inode; +struct linux_binprm; +struct pt_regs; +struct tomoyo_page_buffer; + +int tomoyo_check_file_perm(struct tomoyo_domain_info *domain, + const char *filename, const u8 perm); +int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain, + const struct tomoyo_path_info *filename, + struct tomoyo_page_buffer *buf); +int tomoyo_check_open_permission(struct tomoyo_domain_info *domain, + struct path *path, const int flag); +int tomoyo_check_1path_perm(struct tomoyo_domain_info *domain, + const u8 operation, struct path *path); +int tomoyo_check_2path_perm(struct tomoyo_domain_info *domain, + const u8 operation, struct path *path1, + struct path *path2); +int tomoyo_check_rewrite_permission(struct tomoyo_domain_info *domain, + struct file *filp); +int tomoyo_find_next_domain(struct linux_binprm *bprm, + struct tomoyo_domain_info **next_domain); + +/* Index numbers for Access Controls. */ + +#define TOMOYO_TYPE_SINGLE_PATH_ACL 0 +#define TOMOYO_TYPE_DOUBLE_PATH_ACL 1 + +/* Index numbers for File Controls. */ + +/* + * TYPE_READ_WRITE_ACL is special. TYPE_READ_WRITE_ACL is automatically set + * if both TYPE_READ_ACL and TYPE_WRITE_ACL are set. Both TYPE_READ_ACL and + * TYPE_WRITE_ACL are automatically set if TYPE_READ_WRITE_ACL is set. + * TYPE_READ_WRITE_ACL is automatically cleared if either TYPE_READ_ACL or + * TYPE_WRITE_ACL is cleared. Both TYPE_READ_ACL and TYPE_WRITE_ACL are + * automatically cleared if TYPE_READ_WRITE_ACL is cleared. + */ + +#define TOMOYO_TYPE_READ_WRITE_ACL 0 +#define TOMOYO_TYPE_EXECUTE_ACL 1 +#define TOMOYO_TYPE_READ_ACL 2 +#define TOMOYO_TYPE_WRITE_ACL 3 +#define TOMOYO_TYPE_CREATE_ACL 4 +#define TOMOYO_TYPE_UNLINK_ACL 5 +#define TOMOYO_TYPE_MKDIR_ACL 6 +#define TOMOYO_TYPE_RMDIR_ACL 7 +#define TOMOYO_TYPE_MKFIFO_ACL 8 +#define TOMOYO_TYPE_MKSOCK_ACL 9 +#define TOMOYO_TYPE_MKBLOCK_ACL 10 +#define TOMOYO_TYPE_MKCHAR_ACL 11 +#define TOMOYO_TYPE_TRUNCATE_ACL 12 +#define TOMOYO_TYPE_SYMLINK_ACL 13 +#define TOMOYO_TYPE_REWRITE_ACL 14 +#define TOMOYO_MAX_SINGLE_PATH_OPERATION 15 + +#define TOMOYO_TYPE_LINK_ACL 0 +#define TOMOYO_TYPE_RENAME_ACL 1 +#define TOMOYO_MAX_DOUBLE_PATH_OPERATION 2 + +#define TOMOYO_DOMAINPOLICY 0 +#define TOMOYO_EXCEPTIONPOLICY 1 +#define TOMOYO_DOMAIN_STATUS 2 +#define TOMOYO_PROCESS_STATUS 3 +#define TOMOYO_MEMINFO 4 +#define TOMOYO_SELFDOMAIN 5 +#define TOMOYO_VERSION 6 +#define TOMOYO_PROFILE 7 +#define TOMOYO_MANAGER 8 + +extern struct tomoyo_domain_info tomoyo_kernel_domain; + +static inline struct tomoyo_domain_info *tomoyo_domain(void) +{ + return current_cred()->security; +} + +/* Caller holds tasklist_lock spinlock. */ +static inline struct tomoyo_domain_info *tomoyo_real_domain(struct task_struct + *task) +{ + /***** CRITICAL SECTION START *****/ + const struct cred *cred = get_task_cred(task); + struct tomoyo_domain_info *domain = cred->security; + + put_cred(cred); + return domain; + /***** CRITICAL SECTION END *****/ +} + +#endif /* !defined(_SECURITY_TOMOYO_TOMOYO_H) */ -- cgit v1.2.3 From 00d7d6f840ddc947237307e022de5e75ded4105f Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:17 +0900 Subject: Kconfig and Makefile TOMOYO uses LSM hooks for pathname based access control and securityfs support. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: James Morris --- security/Kconfig | 1 + security/Makefile | 2 ++ security/tomoyo/Kconfig | 11 +++++++++++ security/tomoyo/Makefile | 1 + 4 files changed, 15 insertions(+) create mode 100644 security/tomoyo/Kconfig create mode 100644 security/tomoyo/Makefile diff --git a/security/Kconfig b/security/Kconfig index bf129f87de7e..bb244774e9d7 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -135,6 +135,7 @@ config SECURITY_DEFAULT_MMAP_MIN_ADDR source security/selinux/Kconfig source security/smack/Kconfig +source security/tomoyo/Kconfig source security/integrity/ima/Kconfig diff --git a/security/Makefile b/security/Makefile index 595536cbffb2..35f50c585e2b 100644 --- a/security/Makefile +++ b/security/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_KEYS) += keys/ subdir-$(CONFIG_SECURITY_SELINUX) += selinux subdir-$(CONFIG_SECURITY_SMACK) += smack +subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo # always enable default capabilities obj-y += commoncap.o @@ -17,6 +18,7 @@ obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o +obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o # Object integrity file lists subdir-$(CONFIG_IMA) += integrity/ima diff --git a/security/tomoyo/Kconfig b/security/tomoyo/Kconfig new file mode 100644 index 000000000000..c8f385793235 --- /dev/null +++ b/security/tomoyo/Kconfig @@ -0,0 +1,11 @@ +config SECURITY_TOMOYO + bool "TOMOYO Linux Support" + depends on SECURITY + select SECURITYFS + select SECURITY_PATH + default n + help + This selects TOMOYO Linux, pathname-based access control. + Required userspace tools and further information may be + found at . + If you are unsure how to answer this question, answer N. diff --git a/security/tomoyo/Makefile b/security/tomoyo/Makefile new file mode 100644 index 000000000000..10ccd686b290 --- /dev/null +++ b/security/tomoyo/Makefile @@ -0,0 +1 @@ +obj-y = common.o realpath.o tomoyo.o domain.o file.o -- cgit v1.2.3 From d74db3b22a75fac474abe711f582ffe25eacce25 Mon Sep 17 00:00:00 2001 From: Kentaro Takeda Date: Thu, 5 Feb 2009 17:18:18 +0900 Subject: MAINTAINERS info The archive of tomoyo-users-en mailing list is available at http://lists.sourceforge.jp/mailman/archives/tomoyo-users-en/ . Mailing lists for Japanese users are at http://lists.sourceforge.jp/mailman/archives/tomoyo-users/ and http://lists.sourceforge.jp/mailman/archives/tomoyo-dev/ . TOMOYO Linux English portal is at http://elinux.org/TomoyoLinux . Signed-off-by: Kentaro Takeda Signed-off-by: James Morris --- MAINTAINERS | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index a781f2ec0829..4e71a60d90ac 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4263,6 +4263,19 @@ L: tlan-devel@lists.sourceforge.net (subscribers-only) W: http://sourceforge.net/projects/tlan/ S: Maintained +TOMOYO SECURITY MODULE +P: Kentaro Takeda +M: takedakn@nttdata.co.jp +P: Tetsuo Handa +M: penguin-kernel@I-love.SAKURA.ne.jp +L: linux-kernel@vger.kernel.org (kernel issues) +L: tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English) +L: tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese) +L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese) +W: http://tomoyo.sourceforge.jp/ +T: quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/ +S: Maintained + TOSHIBA ACPI EXTRAS DRIVER P: John Belmonte M: toshiba_acpi@memebeam.org -- cgit v1.2.3 From 42d5aaa2d826f54924e260b58a8e410e59d54163 Mon Sep 17 00:00:00 2001 From: James Morris Date: Thu, 12 Feb 2009 16:29:04 +1100 Subject: security: change link order of LSMs so security=tomoyo works LSMs need to be linked before root_plug to ensure the security= boot parameter works with them. Do this for Tomoyo. (root_plug probably needs to be taken out and shot at some point, too). Signed-off-by: James Morris --- security/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/Makefile b/security/Makefile index 35f50c585e2b..fa77021d9778 100644 --- a/security/Makefile +++ b/security/Makefile @@ -16,9 +16,9 @@ obj-$(CONFIG_SECURITYFS) += inode.o # Must precede capability.o in order to stack properly. obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o +obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o -obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o # Object integrity file lists subdir-$(CONFIG_IMA) += integrity/ima -- cgit v1.2.3 From 35d50e60e8b12e4adc2fa317343a176d87294a72 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 12 Feb 2009 15:53:38 +0900 Subject: tomoyo: fix sparse warning Fix sparse warning. $ make C=2 SUBDIRS=security/tomoyo CF="-D__cold__=" CHECK security/tomoyo/common.c CHECK security/tomoyo/realpath.c CHECK security/tomoyo/tomoyo.c security/tomoyo/tomoyo.c:110:8: warning: symbol 'buf' shadows an earlier one security/tomoyo/tomoyo.c:100:7: originally declared here Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/tomoyo.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index f3ab20758c0f..cc599b36a3a8 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -107,13 +107,13 @@ static char *tomoyo_sysctl_path(struct ctl_table *table) *--end = '\0'; buflen--; while (table) { - char buf[32]; + char num[32]; const char *sp = table->procname; if (!sp) { - memset(buf, 0, sizeof(buf)); - snprintf(buf, sizeof(buf) - 1, "=%d=", table->ctl_name); - sp = buf; + memset(num, 0, sizeof(num)); + snprintf(num, sizeof(num) - 1, "=%d=", table->ctl_name); + sp = num; } if (tomoyo_prepend(&end, &buflen, sp) || tomoyo_prepend(&end, &buflen, "/")) -- cgit v1.2.3 From b53fab9d48e9bd9aeba0b500dec550becd981a91 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 12 Feb 2009 09:54:14 -0800 Subject: ima: fix build error IMA_LSM_RULES requires AUDIT. This is automatic if SECURITY_SELINUX=y but not when SECURITY_SMACK=y (and SECURITY_SELINUX=n), so make the dependency explicit. This fixes the following build error: security/integrity/ima/ima_policy.c:111:error: implicit declaration of function 'security_audit_rule_match' security/integrity/ima/ima_policy.c:230:error: implicit declaration of function 'security_audit_rule_init' Signed-off-by: Randy Dunlap Acked-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/ima/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index 3d2b6ee778a0..53d9764e8f09 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -49,7 +49,7 @@ config IMA_AUDIT config IMA_LSM_RULES bool - depends on IMA && (SECURITY_SELINUX || SECURITY_SMACK) + depends on IMA && AUDIT && (SECURITY_SELINUX || SECURITY_SMACK) default y help - Disabling this option will disregard LSM based policy rules + Disabling this option will disregard LSM based policy rules. -- cgit v1.2.3 From f1eaaeec11982c6b529d4255987fdf507a5fa69e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Feb 2009 08:16:55 +0100 Subject: ALSA: hda - Allow fixed codec-probe mask Some devices have broken BIOS and they don't set the codec probe-bit properly after cleared by the driver. This makes the driver skipping the necessary codec slots. Since BIOS update isn't always easy, now the semantics of probe_mask option is changed a bit. When it contains the bit 8 (0x100), the lower bits are used to probe that slots regardless of codec-probe bits returned by the hardware. For example, probe_mask=0x103 will force to probe the codec slot #0 and #1. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 11e791b965f6..19886e4bc829 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -381,6 +381,7 @@ struct azx { /* HD codec */ unsigned short codec_mask; + int codec_probe_mask; /* copied from probe_mask option */ struct hda_bus *bus; /* CORB/RIRB */ @@ -1228,7 +1229,6 @@ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = { }; static int __devinit azx_codec_create(struct azx *chip, const char *model, - unsigned int codec_probe_mask, int no_init) { struct hda_bus_template bus_temp; @@ -1261,7 +1261,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model, /* First try to probe all given codec slots */ for (c = 0; c < max_slots; c++) { - if ((chip->codec_mask & (1 << c)) & codec_probe_mask) { + if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) { if (probe_codec(chip, c) < 0) { /* Some BIOSen give you wrong codec addresses * that don't exist @@ -1285,7 +1285,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model, /* Then create codec instances */ for (c = 0; c < max_slots; c++) { - if ((chip->codec_mask & (1 << c)) & codec_probe_mask) { + if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) { struct hda_codec *codec; err = snd_hda_codec_new(chip->bus, c, !no_init, &codec); if (err < 0) @@ -2101,20 +2101,31 @@ static struct snd_pci_quirk probe_mask_list[] __devinitdata = { {} }; +#define AZX_FORCE_CODEC_MASK 0x100 + static void __devinit check_probe_mask(struct azx *chip, int dev) { const struct snd_pci_quirk *q; - if (probe_mask[dev] == -1) { + chip->codec_probe_mask = probe_mask[dev]; + if (chip->codec_probe_mask == -1) { q = snd_pci_quirk_lookup(chip->pci, probe_mask_list); if (q) { printk(KERN_INFO "hda_intel: probe_mask set to 0x%x " "for device %04x:%04x\n", q->value, q->subvendor, q->subdevice); - probe_mask[dev] = q->value; + chip->codec_probe_mask = q->value; } } + + /* check forced option */ + if (chip->codec_probe_mask != -1 && + (chip->codec_probe_mask & AZX_FORCE_CODEC_MASK)) { + chip->codec_mask = chip->codec_probe_mask & 0xff; + printk(KERN_INFO "hda_intel: codec_mask forced to 0x%x\n", + chip->codec_mask); + } } @@ -2347,8 +2358,7 @@ static int __devinit azx_probe(struct pci_dev *pci, card->private_data = chip; /* create codec instances */ - err = azx_codec_create(chip, model[dev], probe_mask[dev], - probe_only[dev]); + err = azx_codec_create(chip, model[dev], probe_only[dev]); if (err < 0) goto out_free; -- cgit v1.2.3 From 20db7cb0acd0ba5a3b12f686148d670294a69366 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Feb 2009 08:18:48 +0100 Subject: ALSA: hda - Add forced codec-slots for ASUS W5F ASUS W5F needs the fixed codec-slots to probe to override the BIOS problem. Tested-by: Giovanni Moser Frainer Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 19886e4bc829..e853e4a8bde9 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2098,6 +2098,8 @@ static struct snd_pci_quirk probe_mask_list[] __devinitdata = { SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01), /* including bogus ALC268 in slot#2 that conflicts with ALC888 */ SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01), + /* forced codec slots */ + SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103), {} }; -- cgit v1.2.3 From ae374d667a54fb5e2c9c0c4e87b206bd665f3ad6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Feb 2009 08:33:55 +0100 Subject: ALSA: hda - Update documentation Update documentation regarding codec probing; the new probe_only option and the new probe_mask usage. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 3 +++ Documentation/sound/alsa/HD-Audio.txt | 17 +++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 841a9365d5fd..012afd7afb13 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -757,6 +757,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + When the bit 8 (0x100) is set, the lower 8 bits are used + as the "fixed" codec slots; i.e. the driver probes the + slots regardless what hardware reports back probe_only - Only probing and no codec initialization (default=off); Useful to check the initial codec status for debugging bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 8d68fff71839..99f7fbbe3e67 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -109,6 +109,13 @@ slot, pass `probe_mask=1`. For the first and the third slots, pass Since 2.6.29 kernel, the driver has a more robust probing method, so this error might happen rarely, though. +On a machine with a broken BIOS, sometimes you need to force the +driver to probe the codec slots the hardware doesn't report for use. +In such a case, turn the bit 8 (0x100) of `probe_mask` option on. +Then the rest 8 bits are passed as the codec slots to probe +unconditionally. For example, `probe_mask=0x103` will force to probe +the codec slots 0 and 1 no matter what the hardware reports. + Interrupt Handling ~~~~~~~~~~~~~~~~~~ @@ -461,6 +468,16 @@ run with `--no-upload` option, and attach the generated file. There are some other useful options. See `--help` option output for details. +When a probe error occurs or when the driver obviously assigns a +mismatched model, it'd be helpful to load the driver with +`probe_only=1` option (at best after the cold reboot) and run +alsa-info at this state. With this option, the driver won't configure +the mixer and PCM but just tries to probe the codec slot. After +probing, the proc file is available, so you can get the raw codec +information before modified by the driver. Of course, the driver +isn't usable with `probe_only=1`. But you can continue the +configuration via hwdep sysfs file if hda-reconfig option is enabled. + hda-verb ~~~~~~~~ -- cgit v1.2.3 From 8bb0ac5573ff0879fef511e1a80a4a4db0316daa Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Thu, 12 Feb 2009 16:50:01 -0500 Subject: ALSA: hda: Add STAC_DELL_S14 quirk Add STAC_DELL_S14 quirk for new laptop series. Removed un-needed pins in pin_nids for stac92hd83xxx. Also reorganized connection selection code for the respective ports per quirk define. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 52 ++++++++++++++++++++++++++++-------------- 1 file changed, 35 insertions(+), 17 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3c84817ccd2e..1ebb36ca2e00 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -83,6 +83,7 @@ enum { enum { STAC_92HD83XXX_REF, STAC_92HD83XXX_PWR_REF, + STAC_DELL_S14, STAC_92HD83XXX_MODELS }; @@ -480,10 +481,9 @@ static hda_nid_t stac92hd73xx_pin_nids[13] = { 0x14, 0x22, 0x23 }; -static hda_nid_t stac92hd83xxx_pin_nids[14] = { +static hda_nid_t stac92hd83xxx_pin_nids[10] = { 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, - 0x0f, 0x10, 0x11, 0x12, 0x13, - 0x1d, 0x1e, 0x1f, 0x20 + 0x0f, 0x10, 0x11, 0x1f, 0x20, }; #define STAC92HD71BXX_NUM_PINS 13 @@ -857,9 +857,9 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = { }; static struct hda_verb stac92hd83xxx_core_init[] = { - { 0xa, AC_VERB_SET_CONNECT_SEL, 0x0}, - { 0xb, AC_VERB_SET_CONNECT_SEL, 0x0}, - { 0xd, AC_VERB_SET_CONNECT_SEL, 0x1}, + { 0xa, AC_VERB_SET_CONNECT_SEL, 0x1}, + { 0xb, AC_VERB_SET_CONNECT_SEL, 0x1}, + { 0xd, AC_VERB_SET_CONNECT_SEL, 0x0}, /* power state controls amps */ { 0x01, AC_VERB_SET_EAPD, 1 << 2}, @@ -1730,21 +1730,28 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { {} /* terminator */ }; -static unsigned int ref92hd83xxx_pin_configs[14] = { +static unsigned int ref92hd83xxx_pin_configs[10] = { 0x02214030, 0x02211010, 0x02a19020, 0x02170130, 0x01014050, 0x01819040, 0x01014020, 0x90a3014e, - 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x01451160, 0x98560170, }; +static unsigned int dell_s14_pin_configs[10] = { + 0x02214030, 0x02211010, 0x02a19020, 0x01014050, + 0x40f000f0, 0x01819040, 0x40f000f0, 0x90a60160, + 0x40f000f0, 0x40f000f0, +}; + static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, + [STAC_DELL_S14] = dell_s14_pin_configs, }; static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = "ref", [STAC_92HD83XXX_PWR_REF] = "mic-ref", + [STAC_DELL_S14] = "dell-s14", }; static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { @@ -1753,6 +1760,8 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD83XXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_92HD83XXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba, + "unknown Dell", STAC_DELL_S14), {} /* terminator */ }; @@ -4822,6 +4831,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) hda_nid_t conn[STAC92HD83_DAC_COUNT + 1]; int err; int num_dacs; + hda_nid_t nid; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -4840,15 +4850,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids; - - /* set port 0xe to select the last DAC - */ - num_dacs = snd_hda_get_connections(codec, 0x0e, - conn, STAC92HD83_DAC_COUNT + 1) - 1; - - snd_hda_codec_write_cache(codec, 0xe, 0, - AC_VERB_SET_CONNECT_SEL, num_dacs); - spec->init = stac92hd83xxx_core_init; spec->mixer = stac92hd83xxx_mixer; spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids); @@ -4900,6 +4901,23 @@ again: return err; } + switch (spec->board_config) { + case STAC_DELL_S14: + nid = 0xf; + break; + default: + nid = 0xe; + break; + } + + num_dacs = snd_hda_get_connections(codec, nid, + conn, STAC92HD83_DAC_COUNT + 1) - 1; + + /* set port X to select the last DAC + */ + snd_hda_codec_write_cache(codec, nid, 0, + AC_VERB_SET_CONNECT_SEL, num_dacs); + codec->patch_ops = stac92xx_patch_ops; codec->proc_widget_hook = stac92hd_proc_hook; -- cgit v1.2.3 From 27e089888fb1a3d1d13892262f9d522b03985044 Mon Sep 17 00:00:00 2001 From: Aristeu Sergio Rozanski Filho Date: Thu, 12 Feb 2009 17:50:37 -0500 Subject: ALSA: hda: add quirk for Lenovo X200 laptop dock Currently the HP connector on X200 dock doesn't detect when a HP is connected nor allows sound to be played using it. This patch fixes the problem by adding a quirk for this specific model. It's possible that others have the same NID (0x19) to report when dock HP is connected, but I don't have access to any. Please Cc me in the reply since I'm not subscribed to alsa-devel@. Signed-off-by: Aristeu Rozanski Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_conexant.c | 40 ++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 8f40999a456e..0e52d273ce96 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -262,6 +262,7 @@ Conexant 5051 ============= laptop Basic Laptop config (default) hp HP Spartan laptop + lenovo-x200 Lenovo X200 laptop STAC9200 ======== diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index fdf876be712d..b8de73ecfdeb 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1798,6 +1798,40 @@ static struct hda_verb cxt5051_init_verbs[] = { { } /* end */ }; +static struct hda_verb cxt5051_lenovo_x200_init_verbs[] = { + /* Line in, Mic */ + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03}, + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03}, + /* SPK */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* HP, Amp */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x16, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* Docking HP */ + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* DAC1 */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Record selector: Int mic */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x44}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1) | 0x44}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x44}, + /* SPDIF route: PCM */ + {0x1c, AC_VERB_SET_CONNECT_SEL, 0x0}, + /* EAPD */ + {0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */ + {0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT}, + {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTB_EVENT}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTC_EVENT}, + {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT}, + { } /* end */ +}; + /* initialize jack-sensing, too */ static int cxt5051_init(struct hda_codec *codec) { @@ -1815,18 +1849,21 @@ static int cxt5051_init(struct hda_codec *codec) enum { CXT5051_LAPTOP, /* Laptops w/ EAPD support */ CXT5051_HP, /* no docking */ + CXT5051_LENOVO_X200, /* Lenovo X200 laptop */ CXT5051_MODELS }; static const char *cxt5051_models[CXT5051_MODELS] = { [CXT5051_LAPTOP] = "laptop", [CXT5051_HP] = "hp", + [CXT5051_LENOVO_X200] = "lenovo-x200", }; static struct snd_pci_quirk cxt5051_cfg_tbl[] = { SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5051_LAPTOP), SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP), + SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT5051_LENOVO_X200), {} }; @@ -1867,6 +1904,9 @@ static int patch_cxt5051(struct hda_codec *codec) codec->patch_ops.unsol_event = cxt5051_hp_unsol_event; spec->mixers[0] = cxt5051_hp_mixers; break; + case CXT5051_LENOVO_X200: + spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs; + /* fallthru */ default: case CXT5051_LAPTOP: codec->patch_ops.unsol_event = cxt5051_hp_unsol_event; -- cgit v1.2.3 From 946835074e026f4bbe9f3c2b091dca6346bd1474 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Feb 2009 09:31:20 +0100 Subject: ALSA: hda - Add quirk for Acer AX1700-U3700A Force model=auto for Acer AX1700-U3700A with ALC888 codec. Since Acer devices are handlded as model=acer as default, the auto parsing has to be specified explicitly. (Maybe it's better rather to remove this default model=acer handling, though.) Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e46251bceb9d..2306cca1b69f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8520,6 +8520,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G", ALC888_ACER_ASPIRE_4930G), + SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_4930G), /* default Acer */ -- cgit v1.2.3 From 9b5f12e5a4029c1cd03784754687faef6d9e54fa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Feb 2009 11:47:37 +0100 Subject: ALSA: hda - Add proper cleanup for multiout-dig for ALC codecs The recent patch_realtek.c contains the slave digital-out support as well. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2306cca1b69f..ef9b7ee34100 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2979,6 +2979,14 @@ static int alc880_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, stream_tag, format, substream); } +static int alc880_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct alc_spec *spec = codec->spec; + return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); +} + static int alc880_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) @@ -3062,7 +3070,8 @@ static struct hda_pcm_stream alc880_pcm_digital_playback = { .ops = { .open = alc880_dig_playback_pcm_open, .close = alc880_dig_playback_pcm_close, - .prepare = alc880_dig_playback_pcm_prepare + .prepare = alc880_dig_playback_pcm_prepare, + .cleanup = alc880_dig_playback_pcm_cleanup }, }; -- cgit v1.2.3 From 6a05ac4afa90ac9c38fedd3f6940fe8da5d1fcf6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Feb 2009 11:19:09 +0100 Subject: ALSA: hda - Support multiple digital outs with auto-probing Added the support of multiple digital outputs via auto-probing for Realtek ALC88x codecs. The multiple outputs are handled as slave streams, so only one PCM stream (and the corresponding IEC958* elements) is provided to control both digital outputs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ef9b7ee34100..244de597c5be 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -279,6 +279,7 @@ struct alc_spec { * dig_out_nid and hp_nid are optional */ hda_nid_t alt_dac_nid; + hda_nid_t slave_dig_outs[3]; /* optional - for auto-parsing */ int dig_out_type; /* capture */ @@ -4269,7 +4270,7 @@ static void alc880_auto_init_analog_input(struct hda_codec *codec) static int alc880_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - int err; + int i, err; static hda_nid_t alc880_ignore[] = { 0x1d, 0 }; err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, @@ -4300,8 +4301,23 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = spec->multiout.num_dacs * 2; - if (spec->autocfg.dig_outs) - spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; + /* check multiple SPDIF-out (for recent codecs) */ + for (i = 0; i < spec->autocfg.dig_outs; i++) { + hda_nid_t dig_nid; + err = snd_hda_get_connections(codec, + spec->autocfg.dig_out_pins[i], + &dig_nid, 1); + if (err < 0) + continue; + if (!i) + spec->multiout.dig_out_nid = dig_nid; + else { + spec->multiout.slave_dig_outs = spec->slave_dig_outs; + spec->slave_dig_outs[i - 1] = dig_nid; + if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + break; + } + } if (spec->autocfg.dig_in_pin) spec->dig_in_nid = ALC880_DIGIN_NID; -- cgit v1.2.3 From d5e9ba1d58b6da1c58a91113fc350ece97ec5a0b Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 3 Feb 2009 11:09:32 -0600 Subject: ASoC: add additional controls to the CS4270 codec driver Update the CS4270 codec driver to allow applications to use the mixer to control Digital Loopback, Soft Ramp, Zero Cross, Popguard, and Auto-Mute. Soft Ramp, Zero Cross, and Auto-Mute are disabled by the driver when it first initializes the hardware, but these features either don't work or interfere with normal ALSA behavior. However, they can now be re-enabled by an application if desired. Remove CONFIG_SND_SOC_CS4270_HWMUTE and always allow ASoC to control the mute bits. The driver previously and erroneously assumed that these bits control only external muting circuitry, but they also control internal muting circuitry, so they should always be used. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 6 --- sound/soc/codecs/cs4270.c | 93 ++++++++++++++++++++--------------------------- 2 files changed, 40 insertions(+), 59 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index a195303603e0..628a591c728f 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -67,12 +67,6 @@ config SND_SOC_AK4535 config SND_SOC_CS4270 tristate -# Cirrus Logic CS4270 Codec Hardware Mute Support -# Select if you have external muting circuitry attached to your CS4270. -config SND_SOC_CS4270_HWMUTE - bool - depends on SND_SOC_CS4270 - # Cirrus Logic CS4270 Codec VD = 3.3V Errata # Select if you are affected by the errata where the part will not function # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 2c79a24186fd..cd4a9ee38e46 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -395,17 +395,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - /* Freeze and power-down the codec */ - - ret = snd_soc_write(codec, CS4270_PWRCTL, CS4270_PWRCTL_FREEZE | - CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | - CS4270_PWRCTL_PDN); - if (ret < 0) { - dev_err(codec->dev, "i2c write failed\n"); - return ret; - } - - /* Program the mode control register */ + /* Set the sample rate */ reg = snd_soc_read(codec, CS4270_MODE); reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK); @@ -417,7 +407,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, return ret; } - /* Program the format register */ + /* Set the DAI format */ reg = snd_soc_read(codec, CS4270_FORMAT); reg &= ~(CS4270_FORMAT_DAC_MASK | CS4270_FORMAT_ADC_MASK); @@ -440,42 +430,9 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, return ret; } - /* Disable auto-mute. This feature appears to be buggy, because in - some situations, auto-mute will not deactivate when it should. */ - - reg = snd_soc_read(codec, CS4270_MUTE); - reg &= ~CS4270_MUTE_AUTO; - ret = snd_soc_write(codec, CS4270_MUTE, reg); - if (ret < 0) { - dev_err(codec->dev, "i2c write failed\n"); - return ret; - } - - /* Disable automatic volume control. It's enabled by default, and - * it causes volume change commands to be delayed, sometimes until - * after playback has started. - */ - - reg = cs4270_read_reg_cache(codec, CS4270_TRANS); - reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); - ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); - if (ret < 0) { - dev_err(codec->dev, "i2c write failed\n"); - return ret; - } - - /* Thaw and power-up the codec */ - - ret = snd_soc_write(codec, CS4270_PWRCTL, 0); - if (ret < 0) { - dev_err(codec->dev, "i2c write failed\n"); - return ret; - } - return ret; } -#ifdef CONFIG_SND_SOC_CS4270_HWMUTE /** * cs4270_mute - enable/disable the CS4270 external mute * @dai: the SOC DAI @@ -494,22 +451,23 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute) reg6 = snd_soc_read(codec, CS4270_MUTE); if (mute) - reg6 |= CS4270_MUTE_ADC_A | CS4270_MUTE_ADC_B | - CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B; + reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B; else - reg6 &= ~(CS4270_MUTE_ADC_A | CS4270_MUTE_ADC_B | - CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B); + reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B); return snd_soc_write(codec, CS4270_MUTE, reg6); } -#else -#define cs4270_mute NULL -#endif /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { SOC_DOUBLE_R("Master Playback Volume", - CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1) + CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1), + SOC_SINGLE("Digital Sidetone Switch", CS4270_FORMAT, 5, 1, 0), + SOC_SINGLE("Soft Ramp Switch", CS4270_TRANS, 6, 1, 0), + SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0), + SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1), + SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0), + SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 0) }; /* @@ -637,6 +595,7 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, { struct snd_soc_codec *codec; struct cs4270_private *cs4270; + unsigned int reg; int ret; /* For now, we only support one cs4270 device in the system. See the @@ -702,6 +661,34 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, goto error_free_codec; } + /* Disable auto-mute. This feature appears to be buggy. In some + * situations, auto-mute will not deactivate when it should, so we want + * this feature disabled by default. An application (e.g. alsactl) can + * re-enabled it by using the controls. + */ + + reg = cs4270_read_reg_cache(codec, CS4270_MUTE); + reg &= ~CS4270_MUTE_AUTO; + ret = cs4270_i2c_write(codec, CS4270_MUTE, reg); + if (ret < 0) { + dev_err(&i2c_client->dev, "i2c write failed\n"); + return ret; + } + + /* Disable automatic volume control. The hardware enables, and it + * causes volume change commands to be delayed, sometimes until after + * playback has started. An application (e.g. alsactl) can + * re-enabled it by using the controls. + */ + + reg = cs4270_read_reg_cache(codec, CS4270_TRANS); + reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); + ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); + if (ret < 0) { + dev_err(&i2c_client->dev, "i2c write failed\n"); + return ret; + } + /* Initialize the DAI. Normally, we'd prefer to have a kmalloc'd DAI * structure for each CS4270 device, but the machine driver needs to * have a pointer to the DAI structure, so for now it must be a global -- cgit v1.2.3 From bf3dbe5c8c4b85f98c36d35432efa6573b75e6d3 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 13 Feb 2009 11:36:37 -0800 Subject: ASoC: Fix DaVinci module unload error Fix for the error when the audio module is unloaded. On unregistering the platform_device, platform_device_release will free the platform data.If platform data is static the kernel panics when it is freed. Instead use the platform device helper function to add data. This change has been tested on DM644x EVM, DM644x SFFSDR and DM355 EVM. Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-evm.c | 3 ++- sound/soc/davinci/davinci-sffsdr.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 54851f318568..9b90b347007c 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -186,7 +186,8 @@ static int __init evm_init(void) platform_set_drvdata(evm_snd_device, &evm_snd_devdata); evm_snd_devdata.dev = &evm_snd_device->dev; - evm_snd_device->dev.platform_data = &evm_snd_data; + platform_device_add_data(evm_snd_device, &evm_snd_data, + sizeof(evm_snd_data)); ret = platform_device_add_resources(evm_snd_device, evm_snd_resources, ARRAY_SIZE(evm_snd_resources)); diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c index 50baef1fe5b4..0bf81abba8c7 100644 --- a/sound/soc/davinci/davinci-sffsdr.c +++ b/sound/soc/davinci/davinci-sffsdr.c @@ -141,7 +141,8 @@ static int __init sffsdr_init(void) platform_set_drvdata(sffsdr_snd_device, &sffsdr_snd_devdata); sffsdr_snd_devdata.dev = &sffsdr_snd_device->dev; - sffsdr_snd_device->dev.platform_data = &sffsdr_snd_data; + platform_device_add_data(sffsdr_snd_device, &sffsdr_snd_data, + sizeof(sffsdr_snd_data)); ret = platform_device_add_resources(sffsdr_snd_device, sffsdr_snd_resources, -- cgit v1.2.3 From 200ac532a4bc3134147ca06686c56a6420e66c46 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 15:01:04 -0500 Subject: SELinux: call capabilities code directory For cleanliness and efficiency remove all calls to secondary-> and instead call capabilities code directly. capabilities are the only module that selinux stacks with and so the code should not indicate that other stacking might be possible. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index a69d6f8970ca..e9011e5f5ffb 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1841,7 +1841,7 @@ static int selinux_ptrace_may_access(struct task_struct *child, { int rc; - rc = secondary_ops->ptrace_may_access(child, mode); + rc = cap_ptrace_may_access(child, mode); if (rc) return rc; @@ -1858,7 +1858,7 @@ static int selinux_ptrace_traceme(struct task_struct *parent) { int rc; - rc = secondary_ops->ptrace_traceme(parent); + rc = cap_ptrace_traceme(parent); if (rc) return rc; @@ -1874,7 +1874,7 @@ static int selinux_capget(struct task_struct *target, kernel_cap_t *effective, if (error) return error; - return secondary_ops->capget(target, effective, inheritable, permitted); + return cap_capget(target, effective, inheritable, permitted); } static int selinux_capset(struct cred *new, const struct cred *old, @@ -1884,7 +1884,7 @@ static int selinux_capset(struct cred *new, const struct cred *old, { int error; - error = secondary_ops->capset(new, old, + error = cap_capset(new, old, effective, inheritable, permitted); if (error) return error; @@ -1907,7 +1907,7 @@ static int selinux_capable(struct task_struct *tsk, const struct cred *cred, { int rc; - rc = secondary_ops->capable(tsk, cred, cap, audit); + rc = cap_capable(tsk, cred, cap, audit); if (rc) return rc; @@ -2033,7 +2033,7 @@ static int selinux_syslog(int type) { int rc; - rc = secondary_ops->syslog(type); + rc = cap_syslog(type); if (rc) return rc; @@ -2064,10 +2064,6 @@ static int selinux_syslog(int type) * mapping. 0 means there is enough memory for the allocation to * succeed and -ENOMEM implies there is not. * - * Note that secondary_ops->capable and task_has_perm_noaudit return 0 - * if the capability is granted, but __vm_enough_memory requires 1 if - * the capability is granted. - * * Do not audit the selinux permission check, as this is applied to all * processes that allocate mappings. */ @@ -2094,7 +2090,7 @@ static int selinux_bprm_set_creds(struct linux_binprm *bprm) struct inode *inode = bprm->file->f_path.dentry->d_inode; int rc; - rc = secondary_ops->bprm_set_creds(bprm); + rc = cap_bprm_set_creds(bprm); if (rc) return rc; @@ -2211,7 +2207,7 @@ static int selinux_bprm_secureexec(struct linux_binprm *bprm) PROCESS__NOATSECURE, NULL); } - return (atsecure || secondary_ops->bprm_secureexec(bprm)); + return (atsecure || cap_bprm_secureexec(bprm)); } extern struct vfsmount *selinuxfs_mount; @@ -3312,7 +3308,7 @@ static int selinux_task_setnice(struct task_struct *p, int nice) { int rc; - rc = secondary_ops->task_setnice(p, nice); + rc = cap_task_setnice(p, nice); if (rc) return rc; @@ -3323,7 +3319,7 @@ static int selinux_task_setioprio(struct task_struct *p, int ioprio) { int rc; - rc = secondary_ops->task_setioprio(p, ioprio); + rc = cap_task_setioprio(p, ioprio); if (rc) return rc; @@ -3353,7 +3349,7 @@ static int selinux_task_setscheduler(struct task_struct *p, int policy, struct s { int rc; - rc = secondary_ops->task_setscheduler(p, policy, lp); + rc = cap_task_setscheduler(p, policy, lp); if (rc) return rc; @@ -4749,7 +4745,7 @@ static int selinux_netlink_send(struct sock *sk, struct sk_buff *skb) { int err; - err = secondary_ops->netlink_send(sk, skb); + err = cap_netlink_send(sk, skb); if (err) return err; @@ -4764,7 +4760,7 @@ static int selinux_netlink_recv(struct sk_buff *skb, int capability) int err; struct avc_audit_data ad; - err = secondary_ops->netlink_recv(skb, capability); + err = cap_netlink_recv(skb, capability); if (err) return err; -- cgit v1.2.3 From 4ba0a8ad63e12a03ae01c039482967cc496b9174 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 15:01:10 -0500 Subject: SELinux: better printk when file with invalid label found Currently when an inode is read into the kernel with an invalid label string (can often happen with removable media) we output a string like: SELinux: inode_doinit_with_dentry: context_to_sid([SOME INVALID LABEL]) returned -22 dor dev=[blah] ino=[blah] Which is all but incomprehensible to all but a couple of us. Instead, on EINVAL only, I plan to output a much more user friendly string and I plan to ratelimit the printk since many of these could be generated very rapidly. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index e9011e5f5ffb..aebcfad5613f 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1315,10 +1315,19 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent sbsec->def_sid, GFP_NOFS); if (rc) { - printk(KERN_WARNING "SELinux: %s: context_to_sid(%s) " - "returned %d for dev=%s ino=%ld\n", - __func__, context, -rc, - inode->i_sb->s_id, inode->i_ino); + char *dev = inode->i_sb->s_id; + unsigned long ino = inode->i_ino; + + if (rc == -EINVAL) { + if (printk_ratelimit()) + printk(KERN_NOTICE "SELinux: inode=%lu on dev=%s was found to have an invalid " + "context=%s. This indicates you may need to relabel the inode or the " + "filesystem in question.\n", ino, dev, context); + } else { + printk(KERN_WARNING "SELinux: %s: context_to_sid(%s) " + "returned %d for dev=%s ino=%ld\n", + __func__, context, -rc, dev, ino); + } kfree(context); /* Leave with the unlabeled SID */ rc = 0; -- cgit v1.2.3 From 4cb912f1d1447077160ace9ce3b3a10696dd74e5 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:50:05 -0500 Subject: SELinux: NULL terminate al contexts from disk When a context is pulled in from disk we don't know that it is null terminated. This patch forecebly null terminates contexts when we pull them from disk. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index aebcfad5613f..309648c573d8 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1270,12 +1270,13 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent } len = INITCONTEXTLEN; - context = kmalloc(len, GFP_NOFS); + context = kmalloc(len+1, GFP_NOFS); if (!context) { rc = -ENOMEM; dput(dentry); goto out_unlock; } + context[len] = '\0'; rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX, context, len); if (rc == -ERANGE) { @@ -1288,12 +1289,13 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent } kfree(context); len = rc; - context = kmalloc(len, GFP_NOFS); + context = kmalloc(len+1, GFP_NOFS); if (!context) { rc = -ENOMEM; dput(dentry); goto out_unlock; } + context[len] = '\0'; rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX, context, len); -- cgit v1.2.3 From a5dda683328f99c781f92c66cc52ffc0639bef58 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:50:11 -0500 Subject: SELinux: check seqno when updating an avc_node The avc update node callbacks do not check the seqno of the caller with the seqno of the node found. It is possible that a policy change could happen (although almost impossibly unlikely) in which a permissive or permissive_domain decision is not valid for the entry found. Simply pass and check that the seqno of the caller and the seqno of the node found match. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/avc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index eb41f43e2772..0d00f4874f32 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -742,13 +742,15 @@ static inline int avc_sidcmp(u32 x, u32 y) * @event : Updating event * @perms : Permission mask bits * @ssid,@tsid,@tclass : identifier of an AVC entry + * @seqno : sequence number when decision was made * * if a valid AVC entry doesn't exist,this function returns -ENOENT. * if kmalloc() called internal returns NULL, this function returns -ENOMEM. * otherwise, this function update the AVC entry. The original AVC-entry object * will release later by RCU. */ -static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass) +static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, + u32 seqno) { int hvalue, rc = 0; unsigned long flag; @@ -767,7 +769,8 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass) list_for_each_entry(pos, &avc_cache.slots[hvalue], list) { if (ssid == pos->ae.ssid && tsid == pos->ae.tsid && - tclass == pos->ae.tclass){ + tclass == pos->ae.tclass && + seqno == pos->ae.avd.seqno){ orig = pos; break; } @@ -908,7 +911,7 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid, rc = -EACCES; else if (!selinux_enforcing || security_permissive_sid(ssid)) avc_update_node(AVC_CALLBACK_GRANT, requested, ssid, - tsid, tclass); + tsid, tclass, p_ae->avd.seqno); else rc = -EACCES; } -- cgit v1.2.3 From 906d27d9d28fd50fb40026e56842d8f6806a7a04 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:50:43 -0500 Subject: SELinux: remove the unused ae.used Currently SELinux code has an atomic which was intended to track how many times an avc entry was used and to evict entries when they haven't been used recently. Instead we never let this atomic get above 1 and evict when it is first checked for eviction since it hits zero. This is a total waste of time so I'm completely dropping ae.used. This change resulted in about a 3% faster avc_has_perm_noaudit when running oprofile against a tbench benchmark. Signed-off-by: Eric Paris Reviewed by: Paul Moore Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/avc.c | 28 +++++++--------------------- 1 file changed, 7 insertions(+), 21 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 0d00f4874f32..0afb990fdfa4 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -88,7 +88,6 @@ struct avc_entry { u32 tsid; u16 tclass; struct av_decision avd; - atomic_t used; /* used recently */ }; struct avc_node { @@ -316,16 +315,13 @@ static inline int avc_reclaim_node(void) rcu_read_lock(); list_for_each_entry(node, &avc_cache.slots[hvalue], list) { - if (atomic_dec_and_test(&node->ae.used)) { - /* Recently Unused */ - avc_node_delete(node); - avc_cache_stats_incr(reclaims); - ecx++; - if (ecx >= AVC_CACHE_RECLAIM) { - rcu_read_unlock(); - spin_unlock_irqrestore(&avc_cache.slots_lock[hvalue], flags); - goto out; - } + avc_node_delete(node); + avc_cache_stats_incr(reclaims); + ecx++; + if (ecx >= AVC_CACHE_RECLAIM) { + rcu_read_unlock(); + spin_unlock_irqrestore(&avc_cache.slots_lock[hvalue], flags); + goto out; } } rcu_read_unlock(); @@ -345,7 +341,6 @@ static struct avc_node *avc_alloc_node(void) INIT_RCU_HEAD(&node->rhead); INIT_LIST_HEAD(&node->list); - atomic_set(&node->ae.used, 1); avc_cache_stats_incr(allocations); if (atomic_inc_return(&avc_cache.active_nodes) > avc_cache_threshold) @@ -378,15 +373,6 @@ static inline struct avc_node *avc_search_node(u32 ssid, u32 tsid, u16 tclass) } } - if (ret == NULL) { - /* cache miss */ - goto out; - } - - /* cache hit */ - if (atomic_read(&ret->ae.used) != 1) - atomic_set(&ret->ae.used, 1); -out: return ret; } -- cgit v1.2.3 From 21193dcd1f3570ddfd8a04f4465e484c1f94252f Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:50:49 -0500 Subject: SELinux: more careful use of avd in avc_has_perm_noaudit we are often needlessly jumping through hoops when it comes to avd entries in avc_has_perm_noaudit and we have extra initialization and memcpy which are just wasting performance. Try to clean the function up a bit. This patch resulted in a 13% drop in time spent in avc_has_perm_noaudit in my oprofile sampling of a tbench benchmark. Signed-off-by: Eric Paris Reviewed-by: Paul Moore Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/avc.c | 43 ++++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 0afb990fdfa4..2a84dec4adfe 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -350,12 +350,12 @@ out: return node; } -static void avc_node_populate(struct avc_node *node, u32 ssid, u32 tsid, u16 tclass, struct avc_entry *ae) +static void avc_node_populate(struct avc_node *node, u32 ssid, u32 tsid, u16 tclass, struct av_decision *avd) { node->ae.ssid = ssid; node->ae.tsid = tsid; node->ae.tclass = tclass; - memcpy(&node->ae.avd, &ae->avd, sizeof(node->ae.avd)); + memcpy(&node->ae.avd, avd, sizeof(node->ae.avd)); } static inline struct avc_node *avc_search_node(u32 ssid, u32 tsid, u16 tclass) @@ -435,31 +435,31 @@ static int avc_latest_notif_update(int seqno, int is_insert) * @ssid: source security identifier * @tsid: target security identifier * @tclass: target security class - * @ae: AVC entry + * @avd: resulting av decision * * Insert an AVC entry for the SID pair * (@ssid, @tsid) and class @tclass. * The access vectors and the sequence number are * normally provided by the security server in * response to a security_compute_av() call. If the - * sequence number @ae->avd.seqno is not less than the latest + * sequence number @avd->seqno is not less than the latest * revocation notification, then the function copies * the access vectors into a cache entry, returns * avc_node inserted. Otherwise, this function returns NULL. */ -static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct avc_entry *ae) +static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct av_decision *avd) { struct avc_node *pos, *node = NULL; int hvalue; unsigned long flag; - if (avc_latest_notif_update(ae->avd.seqno, 1)) + if (avc_latest_notif_update(avd->seqno, 1)) goto out; node = avc_alloc_node(); if (node) { hvalue = avc_hash(ssid, tsid, tclass); - avc_node_populate(node, ssid, tsid, tclass, ae); + avc_node_populate(node, ssid, tsid, tclass, avd); spin_lock_irqsave(&avc_cache.slots_lock[hvalue], flag); list_for_each_entry(pos, &avc_cache.slots[hvalue], list) { @@ -772,7 +772,7 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, * Copy and replace original node. */ - avc_node_populate(node, ssid, tsid, tclass, &orig->ae); + avc_node_populate(node, ssid, tsid, tclass, &orig->ae.avd); switch (event) { case AVC_CALLBACK_GRANT: @@ -864,10 +864,10 @@ int avc_ss_reset(u32 seqno) int avc_has_perm_noaudit(u32 ssid, u32 tsid, u16 tclass, u32 requested, unsigned flags, - struct av_decision *avd) + struct av_decision *in_avd) { struct avc_node *node; - struct avc_entry entry, *p_ae; + struct av_decision avd_entry, *avd; int rc = 0; u32 denied; @@ -878,26 +878,31 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid, node = avc_lookup(ssid, tsid, tclass, requested); if (!node) { rcu_read_unlock(); - rc = security_compute_av(ssid, tsid, tclass, requested, &entry.avd); + + if (in_avd) + avd = in_avd; + else + avd = &avd_entry; + + rc = security_compute_av(ssid, tsid, tclass, requested, avd); if (rc) goto out; rcu_read_lock(); - node = avc_insert(ssid, tsid, tclass, &entry); + node = avc_insert(ssid, tsid, tclass, avd); + } else { + if (in_avd) + memcpy(in_avd, &node->ae.avd, sizeof(*in_avd)); + avd = &node->ae.avd; } - p_ae = node ? &node->ae : &entry; - - if (avd) - memcpy(avd, &p_ae->avd, sizeof(*avd)); - - denied = requested & ~(p_ae->avd.allowed); + denied = requested & ~(avd->allowed); if (denied) { if (flags & AVC_STRICT) rc = -EACCES; else if (!selinux_enforcing || security_permissive_sid(ssid)) avc_update_node(AVC_CALLBACK_GRANT, requested, ssid, - tsid, tclass, p_ae->avd.seqno); + tsid, tclass, avd->seqno); else rc = -EACCES; } -- cgit v1.2.3 From f1c6381a6e337adcecf84be2a838bd9e610e2365 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:50:54 -0500 Subject: SELinux: remove unused av.decided field It appears there was an intention to have the security server only decide certain permissions and leave other for later as some sort of a portential performance win. We are currently always deciding all 32 bits of permissions and this is a useless couple of branches and wasted space. This patch completely drops the av.decided concept. This in a 17% reduction in the time spent in avc_has_perm_noaudit based on oprofile sampling of a tbench benchmark. Signed-off-by: Eric Paris Reviewed-by: Paul Moore Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/avc.c | 15 +++++---------- security/selinux/include/security.h | 1 - security/selinux/selinuxfs.c | 2 +- security/selinux/ss/services.c | 2 -- 4 files changed, 6 insertions(+), 14 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 2a84dec4adfe..326aa78bd421 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -381,30 +381,25 @@ static inline struct avc_node *avc_search_node(u32 ssid, u32 tsid, u16 tclass) * @ssid: source security identifier * @tsid: target security identifier * @tclass: target security class - * @requested: requested permissions, interpreted based on @tclass * * Look up an AVC entry that is valid for the - * @requested permissions between the SID pair * (@ssid, @tsid), interpreting the permissions * based on @tclass. If a valid AVC entry exists, * then this function return the avc_node. * Otherwise, this function returns NULL. */ -static struct avc_node *avc_lookup(u32 ssid, u32 tsid, u16 tclass, u32 requested) +static struct avc_node *avc_lookup(u32 ssid, u32 tsid, u16 tclass) { struct avc_node *node; avc_cache_stats_incr(lookups); node = avc_search_node(ssid, tsid, tclass); - if (node && ((node->ae.avd.decided & requested) == requested)) { + if (node) avc_cache_stats_incr(hits); - goto out; - } + else + avc_cache_stats_incr(misses); - node = NULL; - avc_cache_stats_incr(misses); -out: return node; } @@ -875,7 +870,7 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid, rcu_read_lock(); - node = avc_lookup(ssid, tsid, tclass, requested); + node = avc_lookup(ssid, tsid, tclass); if (!node) { rcu_read_unlock(); diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index e1d9db779983..5c3434f7626f 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -88,7 +88,6 @@ int security_policycap_supported(unsigned int req_cap); #define SEL_VEC_MAX 32 struct av_decision { u32 allowed; - u32 decided; u32 auditallow; u32 auditdeny; u32 seqno; diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index 01ec6d2c6b97..d3c8b982cfb0 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -595,7 +595,7 @@ static ssize_t sel_write_access(struct file *file, char *buf, size_t size) length = scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, "%x %x %x %x %u", - avd.allowed, avd.decided, + avd.allowed, 0xffffffff, avd.auditallow, avd.auditdeny, avd.seqno); out2: diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index c65e4fe4a0f1..deeec6c013ae 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -407,7 +407,6 @@ static int context_struct_compute_av(struct context *scontext, * Initialize the access vectors to the default values. */ avd->allowed = 0; - avd->decided = 0xffffffff; avd->auditallow = 0; avd->auditdeny = 0xffffffff; avd->seqno = latest_granting; @@ -743,7 +742,6 @@ int security_compute_av(u32 ssid, if (!ss_initialized) { avd->allowed = 0xffffffff; - avd->decided = 0xffffffff; avd->auditallow = 0; avd->auditdeny = 0xffffffff; avd->seqno = latest_granting; -- cgit v1.2.3 From edf3d1aecd0d608acbd561b0c527e1d41abcb657 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:50:59 -0500 Subject: SELinux: code readability with avc_cache The code making use of struct avc_cache was not easy to read thanks to liberal use of &avc_cache.{slots_lock,slots}[hvalue] throughout. This patch simply creates local pointers and uses those instead of the long global names. Signed-off-by: Eric Paris Signed-off-by: James Morris --- security/selinux/avc.c | 63 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 44 insertions(+), 19 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 326aa78bd421..9dd5c506a826 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -92,12 +92,12 @@ struct avc_entry { struct avc_node { struct avc_entry ae; - struct list_head list; + struct list_head list; /* anchored in avc_cache->slots[i] */ struct rcu_head rhead; }; struct avc_cache { - struct list_head slots[AVC_CACHE_SLOTS]; + struct list_head slots[AVC_CACHE_SLOTS]; /* head for avc_node->list */ spinlock_t slots_lock[AVC_CACHE_SLOTS]; /* lock for writes */ atomic_t lru_hint; /* LRU hint for reclaim scan */ atomic_t active_nodes; @@ -249,16 +249,18 @@ int avc_get_hash_stats(char *page) { int i, chain_len, max_chain_len, slots_used; struct avc_node *node; + struct list_head *head; rcu_read_lock(); slots_used = 0; max_chain_len = 0; for (i = 0; i < AVC_CACHE_SLOTS; i++) { - if (!list_empty(&avc_cache.slots[i])) { + head = &avc_cache.slots[i]; + if (!list_empty(head)) { slots_used++; chain_len = 0; - list_for_each_entry_rcu(node, &avc_cache.slots[i], list) + list_for_each_entry_rcu(node, head, list) chain_len++; if (chain_len > max_chain_len) max_chain_len = chain_len; @@ -306,26 +308,30 @@ static inline int avc_reclaim_node(void) struct avc_node *node; int hvalue, try, ecx; unsigned long flags; + struct list_head *head; + spinlock_t *lock; for (try = 0, ecx = 0; try < AVC_CACHE_SLOTS; try++) { hvalue = atomic_inc_return(&avc_cache.lru_hint) & (AVC_CACHE_SLOTS - 1); + head = &avc_cache.slots[hvalue]; + lock = &avc_cache.slots_lock[hvalue]; - if (!spin_trylock_irqsave(&avc_cache.slots_lock[hvalue], flags)) + if (!spin_trylock_irqsave(lock, flags)) continue; rcu_read_lock(); - list_for_each_entry(node, &avc_cache.slots[hvalue], list) { + list_for_each_entry(node, head, list) { avc_node_delete(node); avc_cache_stats_incr(reclaims); ecx++; if (ecx >= AVC_CACHE_RECLAIM) { rcu_read_unlock(); - spin_unlock_irqrestore(&avc_cache.slots_lock[hvalue], flags); + spin_unlock_irqrestore(lock, flags); goto out; } } rcu_read_unlock(); - spin_unlock_irqrestore(&avc_cache.slots_lock[hvalue], flags); + spin_unlock_irqrestore(lock, flags); } out: return ecx; @@ -362,9 +368,11 @@ static inline struct avc_node *avc_search_node(u32 ssid, u32 tsid, u16 tclass) { struct avc_node *node, *ret = NULL; int hvalue; + struct list_head *head; hvalue = avc_hash(ssid, tsid, tclass); - list_for_each_entry_rcu(node, &avc_cache.slots[hvalue], list) { + head = &avc_cache.slots[hvalue]; + list_for_each_entry_rcu(node, head, list) { if (ssid == node->ae.ssid && tclass == node->ae.tclass && tsid == node->ae.tsid) { @@ -453,11 +461,17 @@ static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct av_dec node = avc_alloc_node(); if (node) { + struct list_head *head; + spinlock_t *lock; + hvalue = avc_hash(ssid, tsid, tclass); avc_node_populate(node, ssid, tsid, tclass, avd); - spin_lock_irqsave(&avc_cache.slots_lock[hvalue], flag); - list_for_each_entry(pos, &avc_cache.slots[hvalue], list) { + head = &avc_cache.slots[hvalue]; + lock = &avc_cache.slots_lock[hvalue]; + + spin_lock_irqsave(lock, flag); + list_for_each_entry(pos, head, list) { if (pos->ae.ssid == ssid && pos->ae.tsid == tsid && pos->ae.tclass == tclass) { @@ -465,9 +479,9 @@ static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct av_dec goto found; } } - list_add_rcu(&node->list, &avc_cache.slots[hvalue]); + list_add_rcu(&node->list, head); found: - spin_unlock_irqrestore(&avc_cache.slots_lock[hvalue], flag); + spin_unlock_irqrestore(lock, flag); } out: return node; @@ -736,6 +750,8 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, int hvalue, rc = 0; unsigned long flag; struct avc_node *pos, *node, *orig = NULL; + struct list_head *head; + spinlock_t *lock; node = avc_alloc_node(); if (!node) { @@ -745,9 +761,13 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, /* Lock the target slot */ hvalue = avc_hash(ssid, tsid, tclass); - spin_lock_irqsave(&avc_cache.slots_lock[hvalue], flag); - list_for_each_entry(pos, &avc_cache.slots[hvalue], list) { + head = &avc_cache.slots[hvalue]; + lock = &avc_cache.slots_lock[hvalue]; + + spin_lock_irqsave(lock, flag); + + list_for_each_entry(pos, head, list) { if (ssid == pos->ae.ssid && tsid == pos->ae.tsid && tclass == pos->ae.tclass && @@ -792,7 +812,7 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, } avc_node_replace(node, orig); out_unlock: - spin_unlock_irqrestore(&avc_cache.slots_lock[hvalue], flag); + spin_unlock_irqrestore(lock, flag); out: return rc; } @@ -807,18 +827,23 @@ int avc_ss_reset(u32 seqno) int i, rc = 0, tmprc; unsigned long flag; struct avc_node *node; + struct list_head *head; + spinlock_t *lock; for (i = 0; i < AVC_CACHE_SLOTS; i++) { - spin_lock_irqsave(&avc_cache.slots_lock[i], flag); + head = &avc_cache.slots[i]; + lock = &avc_cache.slots_lock[i]; + + spin_lock_irqsave(lock, flag); /* * With preemptable RCU, the outer spinlock does not * prevent RCU grace periods from ending. */ rcu_read_lock(); - list_for_each_entry(node, &avc_cache.slots[i], list) + list_for_each_entry(node, head, list) avc_node_delete(node); rcu_read_unlock(); - spin_unlock_irqrestore(&avc_cache.slots_lock[i], flag); + spin_unlock_irqrestore(lock, flag); } for (c = avc_callbacks; c; c = c->next) { -- cgit v1.2.3 From 26036651c562609d1f52d181f9d2cccbf89929b1 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 12 Feb 2009 14:51:04 -0500 Subject: SELinux: convert the avc cache hash list to an hlist We do not need O(1) access to the tail of the avc cache lists and so we are wasting lots of space using struct list_head instead of struct hlist_head. This patch converts the avc cache to use hlists in which there is a single pointer from the head which saves us about 4k of global memory. Resulted in about a 1.5% decrease in time spent in avc_has_perm_noaudit based on oprofile sampling of tbench. Although likely within the noise.... Signed-off-by: Eric Paris Reviewed-by: Paul Moore Signed-off-by: James Morris --- security/selinux/avc.c | 47 +++++++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/security/selinux/avc.c b/security/selinux/avc.c index 9dd5c506a826..7f9b5fac8779 100644 --- a/security/selinux/avc.c +++ b/security/selinux/avc.c @@ -92,12 +92,12 @@ struct avc_entry { struct avc_node { struct avc_entry ae; - struct list_head list; /* anchored in avc_cache->slots[i] */ + struct hlist_node list; /* anchored in avc_cache->slots[i] */ struct rcu_head rhead; }; struct avc_cache { - struct list_head slots[AVC_CACHE_SLOTS]; /* head for avc_node->list */ + struct hlist_head slots[AVC_CACHE_SLOTS]; /* head for avc_node->list */ spinlock_t slots_lock[AVC_CACHE_SLOTS]; /* lock for writes */ atomic_t lru_hint; /* LRU hint for reclaim scan */ atomic_t active_nodes; @@ -233,7 +233,7 @@ void __init avc_init(void) int i; for (i = 0; i < AVC_CACHE_SLOTS; i++) { - INIT_LIST_HEAD(&avc_cache.slots[i]); + INIT_HLIST_HEAD(&avc_cache.slots[i]); spin_lock_init(&avc_cache.slots_lock[i]); } atomic_set(&avc_cache.active_nodes, 0); @@ -249,7 +249,7 @@ int avc_get_hash_stats(char *page) { int i, chain_len, max_chain_len, slots_used; struct avc_node *node; - struct list_head *head; + struct hlist_head *head; rcu_read_lock(); @@ -257,10 +257,12 @@ int avc_get_hash_stats(char *page) max_chain_len = 0; for (i = 0; i < AVC_CACHE_SLOTS; i++) { head = &avc_cache.slots[i]; - if (!list_empty(head)) { + if (!hlist_empty(head)) { + struct hlist_node *next; + slots_used++; chain_len = 0; - list_for_each_entry_rcu(node, head, list) + hlist_for_each_entry_rcu(node, next, head, list) chain_len++; if (chain_len > max_chain_len) max_chain_len = chain_len; @@ -284,7 +286,7 @@ static void avc_node_free(struct rcu_head *rhead) static void avc_node_delete(struct avc_node *node) { - list_del_rcu(&node->list); + hlist_del_rcu(&node->list); call_rcu(&node->rhead, avc_node_free); atomic_dec(&avc_cache.active_nodes); } @@ -298,7 +300,7 @@ static void avc_node_kill(struct avc_node *node) static void avc_node_replace(struct avc_node *new, struct avc_node *old) { - list_replace_rcu(&old->list, &new->list); + hlist_replace_rcu(&old->list, &new->list); call_rcu(&old->rhead, avc_node_free); atomic_dec(&avc_cache.active_nodes); } @@ -308,7 +310,8 @@ static inline int avc_reclaim_node(void) struct avc_node *node; int hvalue, try, ecx; unsigned long flags; - struct list_head *head; + struct hlist_head *head; + struct hlist_node *next; spinlock_t *lock; for (try = 0, ecx = 0; try < AVC_CACHE_SLOTS; try++) { @@ -320,7 +323,7 @@ static inline int avc_reclaim_node(void) continue; rcu_read_lock(); - list_for_each_entry(node, head, list) { + hlist_for_each_entry(node, next, head, list) { avc_node_delete(node); avc_cache_stats_incr(reclaims); ecx++; @@ -346,7 +349,7 @@ static struct avc_node *avc_alloc_node(void) goto out; INIT_RCU_HEAD(&node->rhead); - INIT_LIST_HEAD(&node->list); + INIT_HLIST_NODE(&node->list); avc_cache_stats_incr(allocations); if (atomic_inc_return(&avc_cache.active_nodes) > avc_cache_threshold) @@ -368,11 +371,12 @@ static inline struct avc_node *avc_search_node(u32 ssid, u32 tsid, u16 tclass) { struct avc_node *node, *ret = NULL; int hvalue; - struct list_head *head; + struct hlist_head *head; + struct hlist_node *next; hvalue = avc_hash(ssid, tsid, tclass); head = &avc_cache.slots[hvalue]; - list_for_each_entry_rcu(node, head, list) { + hlist_for_each_entry_rcu(node, next, head, list) { if (ssid == node->ae.ssid && tclass == node->ae.tclass && tsid == node->ae.tsid) { @@ -461,7 +465,8 @@ static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct av_dec node = avc_alloc_node(); if (node) { - struct list_head *head; + struct hlist_head *head; + struct hlist_node *next; spinlock_t *lock; hvalue = avc_hash(ssid, tsid, tclass); @@ -471,7 +476,7 @@ static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct av_dec lock = &avc_cache.slots_lock[hvalue]; spin_lock_irqsave(lock, flag); - list_for_each_entry(pos, head, list) { + hlist_for_each_entry(pos, next, head, list) { if (pos->ae.ssid == ssid && pos->ae.tsid == tsid && pos->ae.tclass == tclass) { @@ -479,7 +484,7 @@ static struct avc_node *avc_insert(u32 ssid, u32 tsid, u16 tclass, struct av_dec goto found; } } - list_add_rcu(&node->list, head); + hlist_add_head_rcu(&node->list, head); found: spin_unlock_irqrestore(lock, flag); } @@ -750,7 +755,8 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, int hvalue, rc = 0; unsigned long flag; struct avc_node *pos, *node, *orig = NULL; - struct list_head *head; + struct hlist_head *head; + struct hlist_node *next; spinlock_t *lock; node = avc_alloc_node(); @@ -767,7 +773,7 @@ static int avc_update_node(u32 event, u32 perms, u32 ssid, u32 tsid, u16 tclass, spin_lock_irqsave(lock, flag); - list_for_each_entry(pos, head, list) { + hlist_for_each_entry(pos, next, head, list) { if (ssid == pos->ae.ssid && tsid == pos->ae.tsid && tclass == pos->ae.tclass && @@ -827,7 +833,8 @@ int avc_ss_reset(u32 seqno) int i, rc = 0, tmprc; unsigned long flag; struct avc_node *node; - struct list_head *head; + struct hlist_head *head; + struct hlist_node *next; spinlock_t *lock; for (i = 0; i < AVC_CACHE_SLOTS; i++) { @@ -840,7 +847,7 @@ int avc_ss_reset(u32 seqno) * prevent RCU grace periods from ending. */ rcu_read_lock(); - list_for_each_entry(node, head, list) + hlist_for_each_entry(node, next, head, list) avc_node_delete(node); rcu_read_unlock(); spin_unlock_irqrestore(lock, flag); -- cgit v1.2.3 From 33043cbb9fd49a957089f5948fe814764d7abbd6 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Fri, 13 Feb 2009 16:00:58 +0900 Subject: TOMOYO: Fix exception policy read failure. Due to wrong initialization, "cat /sys/kernel/security/tomoyo/exception_policy" returned nothing. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/domain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c index 92af8f50e0fa..093a756030bd 100644 --- a/security/tomoyo/domain.c +++ b/security/tomoyo/domain.c @@ -376,7 +376,7 @@ int tomoyo_write_domain_keeper_policy(char *data, const bool is_not, bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head) { struct list_head *pos; - bool done = false; + bool done = true; down_read(&tomoyo_domain_keeper_list_lock); list_for_each_cookie(pos, head->read_var2, -- cgit v1.2.3 From e5a3b95f581da62e2054ef79d3be2d383e9ed664 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 14 Feb 2009 11:46:56 +0900 Subject: TOMOYO: Don't create securityfs entries unless registered. TOMOYO should not create /sys/kernel/security/tomoyo/ interface unless TOMOYO is registered. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/common.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c index 8bedfb1992e5..92cea656ad21 100644 --- a/security/tomoyo/common.c +++ b/security/tomoyo/common.c @@ -2177,6 +2177,10 @@ static int __init tomoyo_initerface_init(void) { struct dentry *tomoyo_dir; + /* Don't create securityfs entries unless registered. */ + if (current_cred()->security != &tomoyo_kernel_domain) + return 0; + tomoyo_dir = securityfs_create_dir("tomoyo", NULL); tomoyo_create_entry("domain_policy", 0600, tomoyo_dir, TOMOYO_DOMAINPOLICY); -- cgit v1.2.3 From e2ea57a8df6da45f5f63ab7b56528a552f36fb72 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 16 Feb 2009 10:23:00 +0100 Subject: ALSA: hda - Fix speaker output on HP DV4 1155-SE Force speaker pin config with model=hp-dv5 model for cases when bios doesn't set it up properly. All reported hp laptops using model=hp-dv5 model have speaker at pin 0x0d with same config, so it's safe to add this within hp-dv5 model. Reference: alsa-devel mailing list thread on http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014390.html Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index aeb5d2126dae..7320059b7135 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1823,6 +1823,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "HP dv7", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7, "HP dv4", STAC_HP_DV5), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, + "HP dv7", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc, "HP dv7", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3600, @@ -5170,6 +5172,10 @@ again: spec->num_smuxes = 0; spec->num_dmuxes = 0; break; + case STAC_HP_DV5: + stac_change_pin_config(codec, 0x0d, 0x90170010); + stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN); + break; }; spec->multiout.dac_nids = spec->dac_nids; -- cgit v1.2.3 From a259cb8eb784352ee9ce46a4fc6cd94fc2fbc68d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 15 Feb 2009 20:51:19 +0100 Subject: sound: OSS: &&/|| typo in ad1848.c &&/|| typo Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/ad1848.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index 7cf9913a47b2..a5b83568bdc8 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -2107,7 +2107,7 @@ int ad1848_control(int cmd, int arg) switch (cmd) { case AD1848_SET_XTAL: /* Change clock frequency of AD1845 (only ) */ - if (devc->model != MD_1845 || devc->model != MD_1845_SSCAPE) + if (devc->model != MD_1845 && devc->model != MD_1845_SSCAPE) return -EINVAL; spin_lock_irqsave(&devc->lock,flags); ad_enter_MCE(devc); -- cgit v1.2.3 From 2ae466f8cc522843fa9a456e46007dd98b052b13 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 16 Feb 2009 14:16:36 +0100 Subject: ALSA: hda - Cleanup IDT92HD7x HP quirks Clean up IDT92HD7x quirks for HP laptops with SND_PCI_QUIRK_MASK(). Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 7320059b7135..d00a211a813b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1817,22 +1817,12 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_92HD71BXX_REF), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2, - "HP dv5", STAC_HP_M4), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, - "HP dv7", STAC_HP_DV5), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7, - "HP dv4", STAC_HP_DV5), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, - "HP dv7", STAC_HP_DV5), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc, - "HP dv7", STAC_HP_M4), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3600, - "HP dv5", STAC_HP_DV5), - SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603, - "HP dv5", STAC_HP_DV5), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, + "HP dv4-7", STAC_HP_DV5), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3600, + "HP dv4-7", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a, - "unknown HP", STAC_HP_M4), + "HP mini 1000", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233, "unknown Dell", STAC_DELL_M4_1), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0234, -- cgit v1.2.3 From c23127566c7a54c8413bf1b99becea76072f467e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 16 Feb 2009 15:20:41 +0100 Subject: ALSA: hda - Clean up quirks for HP laptops with AD1984A Clean up quirks for HP laptops with AD1984A using SND_PCI_QUIRK_MASK() Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index af6b0035e2e8..2c58d7b05aba 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3923,8 +3923,7 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), - SND_PCI_QUIRK(0x103c, 0x3072, "HP", AD1884A_LAPTOP), - SND_PCI_QUIRK(0x103c, 0x3077, "HP", AD1884A_LAPTOP), + SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), -- cgit v1.2.3 From c2b73d1458014a9f461b75bc1756a699a6c0781f Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Mon, 16 Feb 2009 21:38:37 +0100 Subject: ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection cs4232 and cs4236 driver merge to solve PnP BIOS detection. Also, the patch adds recognition if the chip is cs4236b+ or earlier part. This unifies drivers for both cs4232 and cs4236+ chips. It allows to use the PnP BIOS detection for the cs4236+ chips. Previously, only the snd-cs4232 could be detected by the PnP BIOS. The cs4232+ cards reports two separate PnP BIOS ids. The patch adds search for the second id to find out resources assigned to a control port. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- include/sound/wss.h | 1 + sound/isa/Kconfig | 23 ++----- sound/isa/cs423x/Makefile | 2 - sound/isa/cs423x/cs4232.c | 2 - sound/isa/cs423x/cs4236.c | 153 +++++++++++++++++++++------------------------- sound/isa/wss/wss_lib.c | 3 +- 6 files changed, 78 insertions(+), 106 deletions(-) delete mode 100644 sound/isa/cs423x/cs4232.c diff --git a/include/sound/wss.h b/include/sound/wss.h index fd01f22825cd..6d65f322f1d5 100644 --- a/include/sound/wss.h +++ b/include/sound/wss.h @@ -154,6 +154,7 @@ int snd_wss_create(struct snd_card *card, unsigned short hardware, unsigned short hwshare, struct snd_wss **rchip); +int snd_wss_free(struct snd_wss *chip); int snd_wss_pcm(struct snd_wss *chip, int device, struct snd_pcm **rpcm); int snd_wss_timer(struct snd_wss *chip, int device, struct snd_timer **rtimer); int snd_wss_mixer(struct snd_wss *chip); diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 5915dc41c0ee..4e06bbd9298d 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -56,8 +56,8 @@ config SND_AD1848 Say Y here to include support for AD1848 (Analog Devices) or CS4248 (Cirrus Logic - Crystal Semiconductors) chips. - For newer chips from Cirrus Logic, use the CS4231, CS4232 or - CS4236+ drivers. + For newer chips from Cirrus Logic, use the CS4231 or CS4232+ + drivers. To compile this driver as a module, choose M here: the module will be called snd-ad1848. @@ -114,26 +114,15 @@ config SND_CS4231 To compile this driver as a module, choose M here: the module will be called snd-cs4231. -config SND_CS4232 - tristate "Generic Cirrus Logic CS4232 driver" - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_WSS_LIB - help - Say Y here to include support for CS4232 chips from Cirrus - Logic - Crystal Semiconductors. - - To compile this driver as a module, choose M here: the module - will be called snd-cs4232. - config SND_CS4236 - tristate "Generic Cirrus Logic CS4236+ driver" + tristate "Generic Cirrus Logic CS4232/CS4236+ driver" select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB help - Say Y to include support for CS4235,CS4236,CS4237B,CS4238B, - CS4239 chips from Cirrus Logic - Crystal Semiconductors. + Say Y to include support for CS4232,CS4235,CS4236,CS4237B, + CS4238B,CS4239 chips from Cirrus Logic - Crystal + Semiconductors. To compile this driver as a module, choose M here: the module will be called snd-cs4236. diff --git a/sound/isa/cs423x/Makefile b/sound/isa/cs423x/Makefile index 5870ca21ab59..732f66cc036d 100644 --- a/sound/isa/cs423x/Makefile +++ b/sound/isa/cs423x/Makefile @@ -5,11 +5,9 @@ snd-cs4236-lib-objs := cs4236_lib.o snd-cs4231-objs := cs4231.o -snd-cs4232-objs := cs4232.o snd-cs4236-objs := cs4236.o # Toplevel Module Dependency obj-$(CONFIG_SND_CS4231) += snd-cs4231.o -obj-$(CONFIG_SND_CS4232) += snd-cs4232.o obj-$(CONFIG_SND_CS4236) += snd-cs4236.o snd-cs4236-lib.o diff --git a/sound/isa/cs423x/cs4232.c b/sound/isa/cs423x/cs4232.c deleted file mode 100644 index 9fad2e6c0c2c..000000000000 --- a/sound/isa/cs423x/cs4232.c +++ /dev/null @@ -1,2 +0,0 @@ -#define CS4232 -#include "cs4236.c" diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index f7845986f467..a076a6ce8071 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -33,17 +33,14 @@ MODULE_AUTHOR("Jaroslav Kysela "); MODULE_LICENSE("GPL"); -#ifdef CS4232 -MODULE_DESCRIPTION("Cirrus Logic CS4232"); +MODULE_DESCRIPTION("Cirrus Logic CS4232-9"); MODULE_SUPPORTED_DEVICE("{{Turtle Beach,TBS-2000}," "{Turtle Beach,Tropez Plus}," "{SIC CrystalWave 32}," "{Hewlett Packard,Omnibook 5500}," "{TerraTec,Maestro 32/96}," - "{Philips,PCA70PS}}"); -#else -MODULE_DESCRIPTION("Cirrus Logic CS4235-9"); -MODULE_SUPPORTED_DEVICE("{{Crystal Semiconductors,CS4235}," + "{Philips,PCA70PS}}," + "{{Crystal Semiconductors,CS4235}," "{Crystal Semiconductors,CS4236}," "{Crystal Semiconductors,CS4237}," "{Crystal Semiconductors,CS4238}," @@ -70,15 +67,11 @@ MODULE_SUPPORTED_DEVICE("{{Crystal Semiconductors,CS4235}," "{Typhoon Soundsystem,CS4236B}," "{Turtle Beach,Malibu}," "{Unknown,Digital PC 5000 Onboard}}"); -#endif -#ifdef CS4232 -#define IDENT "CS4232" -#define DEV_NAME "cs4232" -#else -#define IDENT "CS4236+" -#define DEV_NAME "cs4236" -#endif +MODULE_ALIAS("snd_cs4232"); + +#define IDENT "CS4232+" +#define DEV_NAME "cs4232+" static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ @@ -128,9 +121,7 @@ MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver."); #ifdef CONFIG_PNP static int isa_registered; static int pnpc_registered; -#ifdef CS4232 static int pnp_registered; -#endif #endif /* CONFIG_PNP */ struct snd_card_cs4236 { @@ -145,11 +136,10 @@ struct snd_card_cs4236 { #ifdef CONFIG_PNP -#ifdef CS4232 /* * PNP BIOS */ -static const struct pnp_device_id snd_cs4232_pnpbiosids[] = { +static const struct pnp_device_id snd_cs423x_pnpbiosids[] = { { .id = "CSC0100" }, { .id = "CSC0000" }, /* Guillemot Turtlebeach something appears to be cs4232 compatible @@ -157,10 +147,8 @@ static const struct pnp_device_id snd_cs4232_pnpbiosids[] = { { .id = "GIM0100" }, { .id = "" } }; -MODULE_DEVICE_TABLE(pnp, snd_cs4232_pnpbiosids); -#endif /* CS4232 */ +MODULE_DEVICE_TABLE(pnp, snd_cs423x_pnpbiosids); -#ifdef CS4232 #define CS423X_ISAPNP_DRIVER "cs4232_isapnp" static struct pnp_card_device_id snd_cs423x_pnpids[] = { /* Philips PCA70PS */ @@ -179,12 +167,6 @@ static struct pnp_card_device_id snd_cs423x_pnpids[] = { { .id = "CSCf032", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } }, /* Netfinity 3000 on-board soundcard */ { .id = "CSCe825", .devs = { { "CSC0100" }, { "CSC0110" }, { "CSC010f" } } }, - /* --- */ - { .id = "" } /* end */ -}; -#else /* CS4236 */ -#define CS423X_ISAPNP_DRIVER "cs4236_isapnp" -static struct pnp_card_device_id snd_cs423x_pnpids[] = { /* Intel Marlin Spike Motherboard - CS4235 */ { .id = "CSC0225", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } }, /* Intel Marlin Spike Motherboard (#2) - CS4235 */ @@ -266,7 +248,6 @@ static struct pnp_card_device_id snd_cs423x_pnpids[] = { /* --- */ { .id = "" } /* end */ }; -#endif MODULE_DEVICE_TABLE(pnp_card, snd_cs423x_pnpids); @@ -323,17 +304,19 @@ static int __devinit snd_cs423x_pnp_init_mpu(int dev, struct pnp_dev *pdev) return 0; } -#ifdef CS4232 -static int __devinit snd_card_cs4232_pnp(int dev, struct snd_card_cs4236 *acard, - struct pnp_dev *pdev) +static int __devinit snd_card_cs423x_pnp(int dev, struct snd_card_cs4236 *acard, + struct pnp_dev *pdev, + struct pnp_dev *cdev) { acard->wss = pdev; if (snd_cs423x_pnp_init_wss(dev, acard->wss) < 0) return -EBUSY; - cport[dev] = -1; + if (cdev) + cport[dev] = pnp_port_start(cdev, 0); + else + cport[dev] = -1; return 0; } -#endif static int __devinit snd_card_cs423x_pnpc(int dev, struct snd_card_cs4236 *acard, struct pnp_card_link *card, @@ -411,40 +394,39 @@ static int __devinit snd_cs423x_probe(struct snd_card *card, int dev) return -EBUSY; } -#ifdef CS4232 err = snd_wss_create(card, port[dev], cport[dev], irq[dev], dma1[dev], dma2[dev], - WSS_HW_DETECT, 0, &chip); - if (err < 0) - return err; - acard->chip = chip; - - err = snd_wss_pcm(chip, 0, &pcm); - if (err < 0) - return err; - - err = snd_wss_mixer(chip); + WSS_HW_DETECT3, 0, &chip); if (err < 0) return err; - -#else /* CS4236 */ - err = snd_cs4236_create(card, - port[dev], cport[dev], - irq[dev], dma1[dev], dma2[dev], - WSS_HW_DETECT, 0, &chip); - if (err < 0) - return err; - acard->chip = chip; - - err = snd_cs4236_pcm(chip, 0, &pcm); - if (err < 0) - return err; - - err = snd_cs4236_mixer(chip); - if (err < 0) - return err; -#endif + if (chip->hardware & WSS_HW_CS4236B_MASK) { + snd_wss_free(chip); + err = snd_cs4236_create(card, + port[dev], cport[dev], + irq[dev], dma1[dev], dma2[dev], + WSS_HW_DETECT, 0, &chip); + if (err < 0) + return err; + acard->chip = chip; + + err = snd_cs4236_pcm(chip, 0, &pcm); + if (err < 0) + return err; + + err = snd_cs4236_mixer(chip); + if (err < 0) + return err; + } else { + acard->chip = chip; + err = snd_wss_pcm(chip, 0, &pcm); + if (err < 0) + return err; + + err = snd_wss_mixer(chip); + if (err < 0) + return err; + } strcpy(card->driver, pcm->name); strcpy(card->shortname, pcm->name); sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", @@ -579,13 +561,14 @@ static struct isa_driver cs423x_isa_driver = { #ifdef CONFIG_PNP -#ifdef CS4232 -static int __devinit snd_cs4232_pnpbios_detect(struct pnp_dev *pdev, +static int __devinit snd_cs423x_pnpbios_detect(struct pnp_dev *pdev, const struct pnp_device_id *id) { static int dev; int err; struct snd_card *card; + struct pnp_dev *cdev; + char cid[PNP_ID_LEN]; if (pnp_device_is_isapnp(pdev)) return -ENOENT; /* we have another procedure - card */ @@ -596,10 +579,19 @@ static int __devinit snd_cs4232_pnpbios_detect(struct pnp_dev *pdev, if (dev >= SNDRV_CARDS) return -ENODEV; + /* prepare second id */ + strcpy(cid, pdev->id[0].id); + cid[5] = '1'; + cdev = NULL; + list_for_each_entry(cdev, &(pdev->protocol->devices), protocol_list) { + if (!strcmp(cdev->id[0].id, cid)) + break; + } err = snd_cs423x_card_new(dev, &card); if (err < 0) return err; - if ((err = snd_card_cs4232_pnp(dev, card->private_data, pdev)) < 0) { + err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev); + if (err < 0) { printk(KERN_ERR "PnP BIOS detection failed for " IDENT "\n"); snd_card_free(card); return err; @@ -614,35 +606,34 @@ static int __devinit snd_cs4232_pnpbios_detect(struct pnp_dev *pdev, return 0; } -static void __devexit snd_cs4232_pnp_remove(struct pnp_dev * pdev) +static void __devexit snd_cs423x_pnp_remove(struct pnp_dev *pdev) { snd_card_free(pnp_get_drvdata(pdev)); pnp_set_drvdata(pdev, NULL); } #ifdef CONFIG_PM -static int snd_cs4232_pnp_suspend(struct pnp_dev *pdev, pm_message_t state) +static int snd_cs423x_pnp_suspend(struct pnp_dev *pdev, pm_message_t state) { return snd_cs423x_suspend(pnp_get_drvdata(pdev)); } -static int snd_cs4232_pnp_resume(struct pnp_dev *pdev) +static int snd_cs423x_pnp_resume(struct pnp_dev *pdev) { return snd_cs423x_resume(pnp_get_drvdata(pdev)); } #endif -static struct pnp_driver cs4232_pnp_driver = { - .name = "cs4232-pnpbios", - .id_table = snd_cs4232_pnpbiosids, - .probe = snd_cs4232_pnpbios_detect, - .remove = __devexit_p(snd_cs4232_pnp_remove), +static struct pnp_driver cs423x_pnp_driver = { + .name = "cs423x-pnpbios", + .id_table = snd_cs423x_pnpbiosids, + .probe = snd_cs423x_pnpbios_detect, + .remove = __devexit_p(snd_cs423x_pnp_remove), #ifdef CONFIG_PM - .suspend = snd_cs4232_pnp_suspend, - .resume = snd_cs4232_pnp_resume, + .suspend = snd_cs423x_pnp_suspend, + .resume = snd_cs423x_pnp_resume, #endif }; -#endif /* CS4232 */ static int __devinit snd_cs423x_pnpc_detect(struct pnp_card_link *pcard, const struct pnp_card_device_id *pid) @@ -716,18 +707,14 @@ static int __init alsa_card_cs423x_init(void) #ifdef CONFIG_PNP if (!err) isa_registered = 1; -#ifdef CS4232 - err = pnp_register_driver(&cs4232_pnp_driver); + err = pnp_register_driver(&cs423x_pnp_driver); if (!err) pnp_registered = 1; -#endif err = pnp_register_card_driver(&cs423x_pnpc_driver); if (!err) pnpc_registered = 1; -#ifdef CS4232 if (pnp_registered) err = 0; -#endif if (isa_registered) err = 0; #endif @@ -739,10 +726,8 @@ static void __exit alsa_card_cs423x_exit(void) #ifdef CONFIG_PNP if (pnpc_registered) pnp_unregister_card_driver(&cs423x_pnpc_driver); -#ifdef CS4232 if (pnp_registered) - pnp_unregister_driver(&cs4232_pnp_driver); -#endif + pnp_unregister_driver(&cs423x_pnp_driver); if (isa_registered) #endif isa_unregister_driver(&cs423x_isa_driver); diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 8de5deda7ad6..ac27832b2c6f 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -1657,7 +1657,7 @@ static void snd_wss_resume(struct snd_wss *chip) } #endif /* CONFIG_PM */ -static int snd_wss_free(struct snd_wss *chip) +int snd_wss_free(struct snd_wss *chip) { release_and_free_resource(chip->res_port); release_and_free_resource(chip->res_cport); @@ -1680,6 +1680,7 @@ static int snd_wss_free(struct snd_wss *chip) kfree(chip); return 0; } +EXPORT_SYMBOL(snd_wss_free); static int snd_wss_dev_free(struct snd_device *device) { -- cgit v1.2.3 From c844a5d38e4247fc71e371221cf762a2a44d565b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 16 Feb 2009 23:17:33 +0100 Subject: ALSA: Fix documentation for snd-cs4236 driver Updated; removal of snd-cs4232 entry. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 30 +++++-------------------- 1 file changed, 5 insertions(+), 25 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a763b76afe51..57fe4f3ca2c0 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -391,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. - Module snd-cs4232 - ----------------- - - Module for sound cards based on CS4232/CS4232A ISA chips. - - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) - - with isapnp=0, the following options are available: - - port - port # for CS4232 chip (PnP setup - 0x534) - cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00) - mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable - fm_port - FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable - irq - IRQ # for CS4232 chip (5,7,9,11,12,15) - mpu_irq - IRQ # for MPU-401 UART (9,11,12,15) - dma1 - first DMA # for CS4232 chip (0,1,3) - dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable - - This module supports multiple cards. This module does not support autoprobe - (if ISA PnP is not used) thus main port must be specified!!! Other ports are - optional. - - The power-management is supported. - Module snd-cs4236 ----------------- - Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/ + Module for sound cards based on CS4232/CS4232A, + CS4235/CS4236/CS4236B/CS4237B/ CS4238B/CS4239 ISA chips. isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) @@ -440,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + This module is aliased as snd-cs4232 since it provides the old + snd-cs4232 functionality, too. + Module snd-cs4281 ----------------- -- cgit v1.2.3 From 83807400794a1d680a4fb70a610c5f486e734f45 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Feb 2009 07:59:40 +0100 Subject: ALSA: au88x0 - Fix &&|| typo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed a typo of || and &&. As it's in a disabled code section, there is no behavior change, though. Reported-by: Jörg-Volker Peetz Signed-off-by: Takashi Iwai --- sound/pci/au88x0/au88x0_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c index e6a04d037c15..3906f5afe27a 100644 --- a/sound/pci/au88x0/au88x0_core.c +++ b/sound/pci/au88x0/au88x0_core.c @@ -2800,7 +2800,7 @@ vortex_translateformat(vortex_t * vortex, char bits, char nch, int encod) { int a, this_194; - if ((bits != 8) || (bits != 16)) + if ((bits != 8) && (bits != 16)) return -1; switch (encod) { -- cgit v1.2.3 From b22f5d94c432e97df8d85151fcf3da16cee75f04 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Feb 2009 08:02:16 +0100 Subject: sound: OSS: ad1848 - Fix another typo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix another typo of || and &&. Reported-by: Jörg-Volker Peetz Signed-off-by: Takashi Iwai --- sound/oss/ad1848.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index a5b83568bdc8..d12bd98a37ba 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -280,7 +280,7 @@ static void wait_for_calibration(ad1848_info * devc) while (timeout > 0 && (ad_read(devc, 11) & 0x20)) timeout--; if (ad_read(devc, 11) & 0x20) - if ( (devc->model != MD_1845) || (devc->model != MD_1845_SSCAPE)) + if ((devc->model != MD_1845) && (devc->model != MD_1845_SSCAPE)) printk(KERN_WARNING "ad1848: Auto calibration timed out(3).\n"); } -- cgit v1.2.3 From cda9043d56cee9fea39e4ee33fd605ae477a1950 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Feb 2009 08:10:54 +0100 Subject: ALSA: cs4236 - Merge snd-cs4236-lib module into snd-cs4236 Since cs4232 and cs4236 drivers are merged, there is no reason to keep snd-cs4236-lib module separately. Let's merge it into the main driver as well. Signed-off-by: Takashi Iwai --- sound/isa/cs423x/Makefile | 6 +++--- sound/isa/cs423x/cs4236_lib.c | 24 ------------------------ 2 files changed, 3 insertions(+), 27 deletions(-) diff --git a/sound/isa/cs423x/Makefile b/sound/isa/cs423x/Makefile index 732f66cc036d..6d397e8d54ac 100644 --- a/sound/isa/cs423x/Makefile +++ b/sound/isa/cs423x/Makefile @@ -3,11 +3,11 @@ # Copyright (c) 2001 by Jaroslav Kysela # -snd-cs4236-lib-objs := cs4236_lib.o snd-cs4231-objs := cs4231.o -snd-cs4236-objs := cs4236.o +snd-cs4236-objs := cs4236.o cs4236_lib.o # Toplevel Module Dependency obj-$(CONFIG_SND_CS4231) += snd-cs4231.o -obj-$(CONFIG_SND_CS4236) += snd-cs4236.o snd-cs4236-lib.o +obj-$(CONFIG_SND_CS4236) += snd-cs4236.o + diff --git a/sound/isa/cs423x/cs4236_lib.c b/sound/isa/cs423x/cs4236_lib.c index 2406efdfd8dd..38835f31298b 100644 --- a/sound/isa/cs423x/cs4236_lib.c +++ b/sound/isa/cs423x/cs4236_lib.c @@ -88,10 +88,6 @@ #include #include -MODULE_AUTHOR("Jaroslav Kysela "); -MODULE_DESCRIPTION("Routines for control of CS4235/4236B/4237B/4238B/4239 chips"); -MODULE_LICENSE("GPL"); - /* * */ @@ -1022,23 +1018,3 @@ int snd_cs4236_mixer(struct snd_wss *chip) } return 0; } - -EXPORT_SYMBOL(snd_cs4236_create); -EXPORT_SYMBOL(snd_cs4236_pcm); -EXPORT_SYMBOL(snd_cs4236_mixer); - -/* - * INIT part - */ - -static int __init alsa_cs4236_init(void) -{ - return 0; -} - -static void __exit alsa_cs4236_exit(void) -{ -} - -module_init(alsa_cs4236_init) -module_exit(alsa_cs4236_exit) -- cgit v1.2.3 From 31b59cf9cebb5bb675f49fe44814bbb7270374cc Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Mon, 16 Feb 2009 02:49:41 +0300 Subject: ASoC: Fix WM8753 DAIs unregistering WM8753 uses a tricky way to switch DAIs "on the fly", for that it registers 2 dummy DAIs and substitutes them depending on mixer control. List element of registered dummy DAIs should be preserved to allow unregistering of DAIs on module unload. Signed-off-by: Paul Fertser Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 6f9e6beabb14..dc6042c6424f 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1451,30 +1451,35 @@ static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode) if (mode < 4) { int playback_active, capture_active, codec_active, pop_wait; void *private_data; + struct list_head list; playback_active = wm8753_dai[0].playback.active; capture_active = wm8753_dai[0].capture.active; codec_active = wm8753_dai[0].active; private_data = wm8753_dai[0].private_data; pop_wait = wm8753_dai[0].pop_wait; + list = wm8753_dai[0].list; wm8753_dai[0] = wm8753_all_dai[mode << 1]; wm8753_dai[0].playback.active = playback_active; wm8753_dai[0].capture.active = capture_active; wm8753_dai[0].active = codec_active; wm8753_dai[0].private_data = private_data; wm8753_dai[0].pop_wait = pop_wait; + wm8753_dai[0].list = list; playback_active = wm8753_dai[1].playback.active; capture_active = wm8753_dai[1].capture.active; codec_active = wm8753_dai[1].active; private_data = wm8753_dai[1].private_data; pop_wait = wm8753_dai[1].pop_wait; + list = wm8753_dai[1].list; wm8753_dai[1] = wm8753_all_dai[(mode << 1) + 1]; wm8753_dai[1].playback.active = playback_active; wm8753_dai[1].capture.active = capture_active; wm8753_dai[1].active = codec_active; wm8753_dai[1].private_data = private_data; wm8753_dai[1].pop_wait = pop_wait; + wm8753_dai[1].list = list; } wm8753_dai[0].codec = codec; wm8753_dai[1].codec = codec; -- cgit v1.2.3 From 7b317b692a03a870d7acda0a0bd4d211f1c064fe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 14:08:22 +0000 Subject: ASoC: Remove version display from the WM8731 driver It makes boot a bit more noisy and I never remember to update it. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 0150fe53a65d..816e5bf9edc1 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -29,8 +29,6 @@ #include "wm8731.h" -#define WM8731_VERSION "0.13" - struct snd_soc_codec_device soc_codec_dev_wm8731; /* codec private data */ @@ -702,8 +700,6 @@ static int wm8731_probe(struct platform_device *pdev) struct wm8731_priv *wm8731; int ret = 0; - pr_info("WM8731 Audio Codec %s", WM8731_VERSION); - setup = socdev->codec_data; codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); if (codec == NULL) -- cgit v1.2.3 From 22d22ee5146ae823b1e93fe2887a7cba56015091 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 19:20:15 +0000 Subject: ASoC: Clean up WM8731 bias level configuration The WM8731 bias level configuration function was written slightly obscurely - streamline the code a little and refresh the comments. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 816e5bf9edc1..c6db67793777 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -396,21 +396,19 @@ static int wm8731_set_dai_fmt(struct snd_soc_dai *codec_dai, static int wm8731_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - u16 reg = wm8731_read_reg_cache(codec, WM8731_PWR) & 0xff7f; + u16 reg; switch (level) { case SND_SOC_BIAS_ON: - /* vref/mid, osc on, dac unmute */ - wm8731_write(codec, WM8731_PWR, reg); break; case SND_SOC_BIAS_PREPARE: break; case SND_SOC_BIAS_STANDBY: - /* everything off except vref/vmid, */ + /* Clear PWROFF, gate CLKOUT, everything else as-is */ + reg = wm8731_read_reg_cache(codec, WM8731_PWR) & 0xff7f; wm8731_write(codec, WM8731_PWR, reg | 0x0040); break; case SND_SOC_BIAS_OFF: - /* everything off, dac mute, inactive */ wm8731_write(codec, WM8731_ACTIVE, 0x0); wm8731_write(codec, WM8731_PWR, 0xffff); break; -- cgit v1.2.3 From 109568e110ed67d4be1b28609b9fa00fca97f8eb Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 9 Jan 2009 16:49:30 +1100 Subject: crypto: aes - Move key_length in struct crypto_aes_ctx to be the last field The Intel AES-NI AES acceleration instructions need key_enc, key_dec in struct crypto_aes_ctx to be 16 byte aligned, it make this easier to move key_length to be the last one. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- arch/x86/crypto/aes-i586-asm_32.S | 6 +++--- arch/x86/crypto/aes-x86_64-asm_64.S | 4 ++-- include/crypto/aes.h | 6 +++++- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S index e41b147f4509..5252c3880177 100644 --- a/arch/x86/crypto/aes-i586-asm_32.S +++ b/arch/x86/crypto/aes-i586-asm_32.S @@ -46,9 +46,9 @@ #define in_blk 16 /* offsets in crypto_tfm structure */ -#define klen (crypto_tfm_ctx_offset + 0) -#define ekey (crypto_tfm_ctx_offset + 4) -#define dkey (crypto_tfm_ctx_offset + 244) +#define klen (crypto_tfm_ctx_offset + 480) +#define ekey (crypto_tfm_ctx_offset + 0) +#define dkey (crypto_tfm_ctx_offset + 240) // register mapping for encrypt and decrypt subroutines diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S b/arch/x86/crypto/aes-x86_64-asm_64.S index a120f526c3df..7f28f62737de 100644 --- a/arch/x86/crypto/aes-x86_64-asm_64.S +++ b/arch/x86/crypto/aes-x86_64-asm_64.S @@ -56,13 +56,13 @@ .align 8; \ FUNC: movq r1,r2; \ movq r3,r4; \ - leaq BASE+KEY+48+4(r8),r9; \ + leaq BASE+KEY+48(r8),r9; \ movq r10,r11; \ movl (r7),r5 ## E; \ movl 4(r7),r1 ## E; \ movl 8(r7),r6 ## E; \ movl 12(r7),r7 ## E; \ - movl BASE+0(r8),r10 ## E; \ + movl BASE+480(r8),r10 ## E; \ xorl -48(r9),r5 ## E; \ xorl -44(r9),r1 ## E; \ xorl -40(r9),r6 ## E; \ diff --git a/include/crypto/aes.h b/include/crypto/aes.h index 656a4c66a568..7524ba3b6f3c 100644 --- a/include/crypto/aes.h +++ b/include/crypto/aes.h @@ -17,10 +17,14 @@ #define AES_MAX_KEYLENGTH (15 * 16) #define AES_MAX_KEYLENGTH_U32 (AES_MAX_KEYLENGTH / sizeof(u32)) +/* + * Please ensure that the first two fields are 16-byte aligned + * relative to the start of the structure, i.e., don't move them! + */ struct crypto_aes_ctx { - u32 key_length; u32 key_enc[AES_MAX_KEYLENGTH_U32]; u32 key_dec[AES_MAX_KEYLENGTH_U32]; + u32 key_length; }; extern const u32 crypto_ft_tab[4][256]; -- cgit v1.2.3 From 07bf44f86989f5ed866510374fe761d1903681fb Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 9 Jan 2009 17:25:50 +1100 Subject: crypto: aes - Export x86 AES encrypt/decrypt functions Intel AES-NI AES acceleration instructions touch XMM state, to use that in soft_irq context, general x86 AES implementation is used as fallback. The first parameter is changed from struct crypto_tfm * to struct crypto_aes_ctx * to make it easier to deal with 16 bytes alignment requirement of AES-NI implementation. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- arch/x86/crypto/aes-i586-asm_32.S | 18 +++++++++--------- arch/x86/crypto/aes-x86_64-asm_64.S | 6 ++---- arch/x86/crypto/aes_glue.c | 20 ++++++++++++++++---- arch/x86/include/asm/aes.h | 11 +++++++++++ 4 files changed, 38 insertions(+), 17 deletions(-) create mode 100644 arch/x86/include/asm/aes.h diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S index 5252c3880177..b949ec2f9af4 100644 --- a/arch/x86/crypto/aes-i586-asm_32.S +++ b/arch/x86/crypto/aes-i586-asm_32.S @@ -41,14 +41,14 @@ #define tlen 1024 // length of each of 4 'xor' arrays (256 32-bit words) /* offsets to parameters with one register pushed onto stack */ -#define tfm 8 +#define ctx 8 #define out_blk 12 #define in_blk 16 -/* offsets in crypto_tfm structure */ -#define klen (crypto_tfm_ctx_offset + 480) -#define ekey (crypto_tfm_ctx_offset + 0) -#define dkey (crypto_tfm_ctx_offset + 240) +/* offsets in crypto_aes_ctx structure */ +#define klen (480) +#define ekey (0) +#define dkey (240) // register mapping for encrypt and decrypt subroutines @@ -217,7 +217,7 @@ do_col (table, r5,r0,r1,r4, r2,r3); /* idx=r5 */ // AES (Rijndael) Encryption Subroutine -/* void aes_enc_blk(struct crypto_tfm *tfm, u8 *out_blk, const u8 *in_blk) */ +/* void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */ .global aes_enc_blk @@ -228,7 +228,7 @@ aes_enc_blk: push %ebp - mov tfm(%esp),%ebp + mov ctx(%esp),%ebp // CAUTION: the order and the values used in these assigns // rely on the register mappings @@ -292,7 +292,7 @@ aes_enc_blk: ret // AES (Rijndael) Decryption Subroutine -/* void aes_dec_blk(struct crypto_tfm *tfm, u8 *out_blk, const u8 *in_blk) */ +/* void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */ .global aes_dec_blk @@ -303,7 +303,7 @@ aes_enc_blk: aes_dec_blk: push %ebp - mov tfm(%esp),%ebp + mov ctx(%esp),%ebp // CAUTION: the order and the values used in these assigns // rely on the register mappings diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S b/arch/x86/crypto/aes-x86_64-asm_64.S index 7f28f62737de..5b577d5a059b 100644 --- a/arch/x86/crypto/aes-x86_64-asm_64.S +++ b/arch/x86/crypto/aes-x86_64-asm_64.S @@ -17,8 +17,6 @@ #include -#define BASE crypto_tfm_ctx_offset - #define R1 %rax #define R1E %eax #define R1X %ax @@ -56,13 +54,13 @@ .align 8; \ FUNC: movq r1,r2; \ movq r3,r4; \ - leaq BASE+KEY+48(r8),r9; \ + leaq KEY+48(r8),r9; \ movq r10,r11; \ movl (r7),r5 ## E; \ movl 4(r7),r1 ## E; \ movl 8(r7),r6 ## E; \ movl 12(r7),r7 ## E; \ - movl BASE+480(r8),r10 ## E; \ + movl 480(r8),r10 ## E; \ xorl -48(r9),r5 ## E; \ xorl -44(r9),r1 ## E; \ xorl -40(r9),r6 ## E; \ diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c index 71f457827116..49ae9fe32b22 100644 --- a/arch/x86/crypto/aes_glue.c +++ b/arch/x86/crypto/aes_glue.c @@ -5,17 +5,29 @@ #include -asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); -asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); +asmlinkage void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in); +asmlinkage void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in); + +void crypto_aes_encrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) +{ + aes_enc_blk(ctx, dst, src); +} +EXPORT_SYMBOL_GPL(crypto_aes_encrypt_x86); + +void crypto_aes_decrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) +{ + aes_dec_blk(ctx, dst, src); +} +EXPORT_SYMBOL_GPL(crypto_aes_decrypt_x86); static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) { - aes_enc_blk(tfm, dst, src); + aes_enc_blk(crypto_tfm_ctx(tfm), dst, src); } static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) { - aes_dec_blk(tfm, dst, src); + aes_dec_blk(crypto_tfm_ctx(tfm), dst, src); } static struct crypto_alg aes_alg = { diff --git a/arch/x86/include/asm/aes.h b/arch/x86/include/asm/aes.h new file mode 100644 index 000000000000..80545a1cbe39 --- /dev/null +++ b/arch/x86/include/asm/aes.h @@ -0,0 +1,11 @@ +#ifndef ASM_X86_AES_H +#define ASM_X86_AES_H + +#include +#include + +void crypto_aes_encrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, + const u8 *src); +void crypto_aes_decrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, + const u8 *src); +#endif -- cgit v1.2.3 From 1693531e9ef11959300617c68a8322ad006b5475 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 14 Jan 2009 13:34:48 +1100 Subject: crypto: shash - Remove superfluous check in init_tfm We're currently checking the frontend type in init_tfm. This is completely pointless because the fact that we're called at all means that the frontend is ours so the type must match as well. Signed-off-by: Herbert Xu --- crypto/shash.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/crypto/shash.c b/crypto/shash.c index d5a2b619c55f..13a0dc150a4d 100644 --- a/crypto/shash.c +++ b/crypto/shash.c @@ -442,8 +442,6 @@ static unsigned int crypto_shash_ctxsize(struct crypto_alg *alg, u32 type, static int crypto_shash_init_tfm(struct crypto_tfm *tfm, const struct crypto_type *frontend) { - if (frontend->type != CRYPTO_ALG_TYPE_SHASH) - return -EINVAL; return 0; } -- cgit v1.2.3 From 1cac2cbc76b9f3fce0d4ccc374e724e7f2533a47 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Sun, 18 Jan 2009 16:19:46 +1100 Subject: crypto: cryptd - Add support to access underlying blkcipher cryptd_alloc_ablkcipher() will allocate a cryptd-ed ablkcipher for specified algorithm name. The new allocated one is guaranteed to be cryptd-ed ablkcipher, so the blkcipher underlying can be gotten via cryptd_ablkcipher_child(). Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- crypto/cryptd.c | 35 +++++++++++++++++++++++++++++++++++ include/crypto/cryptd.h | 27 +++++++++++++++++++++++++++ 2 files changed, 62 insertions(+) create mode 100644 include/crypto/cryptd.h diff --git a/crypto/cryptd.c b/crypto/cryptd.c index d29e06b350ff..93b98c525b3a 100644 --- a/crypto/cryptd.c +++ b/crypto/cryptd.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -537,6 +538,40 @@ static struct crypto_template cryptd_tmpl = { .module = THIS_MODULE, }; +struct cryptd_ablkcipher *cryptd_alloc_ablkcipher(const char *alg_name, + u32 type, u32 mask) +{ + char cryptd_alg_name[CRYPTO_MAX_ALG_NAME]; + struct crypto_ablkcipher *tfm; + + if (snprintf(cryptd_alg_name, CRYPTO_MAX_ALG_NAME, + "cryptd(%s)", alg_name) >= CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-EINVAL); + tfm = crypto_alloc_ablkcipher(cryptd_alg_name, type, mask); + if (IS_ERR(tfm)) + return ERR_CAST(tfm); + if (crypto_ablkcipher_tfm(tfm)->__crt_alg->cra_module != THIS_MODULE) { + crypto_free_ablkcipher(tfm); + return ERR_PTR(-EINVAL); + } + + return __cryptd_ablkcipher_cast(tfm); +} +EXPORT_SYMBOL_GPL(cryptd_alloc_ablkcipher); + +struct crypto_blkcipher *cryptd_ablkcipher_child(struct cryptd_ablkcipher *tfm) +{ + struct cryptd_blkcipher_ctx *ctx = crypto_ablkcipher_ctx(&tfm->base); + return ctx->child; +} +EXPORT_SYMBOL_GPL(cryptd_ablkcipher_child); + +void cryptd_free_ablkcipher(struct cryptd_ablkcipher *tfm) +{ + crypto_free_ablkcipher(&tfm->base); +} +EXPORT_SYMBOL_GPL(cryptd_free_ablkcipher); + static inline int cryptd_create_thread(struct cryptd_state *state, int (*fn)(void *data), const char *name) { diff --git a/include/crypto/cryptd.h b/include/crypto/cryptd.h new file mode 100644 index 000000000000..55fa7bbdbc71 --- /dev/null +++ b/include/crypto/cryptd.h @@ -0,0 +1,27 @@ +/* + * Software async crypto daemon + */ + +#ifndef _CRYPTO_CRYPT_H +#define _CRYPTO_CRYPT_H + +#include +#include + +struct cryptd_ablkcipher { + struct crypto_ablkcipher base; +}; + +static inline struct cryptd_ablkcipher *__cryptd_ablkcipher_cast( + struct crypto_ablkcipher *tfm) +{ + return (struct cryptd_ablkcipher *)tfm; +} + +/* alg_name should be algorithm to be cryptd-ed */ +struct cryptd_ablkcipher *cryptd_alloc_ablkcipher(const char *alg_name, + u32 type, u32 mask); +struct crypto_blkcipher *cryptd_ablkcipher_child(struct cryptd_ablkcipher *tfm); +void cryptd_free_ablkcipher(struct cryptd_ablkcipher *tfm); + +#endif -- cgit v1.2.3 From 54b6a1bd5364aca95cd6ffae00f2b64c6511122c Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Sun, 18 Jan 2009 16:28:34 +1100 Subject: crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64 platform Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD) instructions that are going to be introduced in the next generation of Intel processor, as of 2009. These instructions enable fast and secure data encryption and decryption, using the Advanced Encryption Standard (AES), defined by FIPS Publication number 197. The architecture introduces six instructions that offer full hardware support for AES. Four of them support high performance data encryption and decryption, and the other two instructions support the AES key expansion procedure. The white paper can be downloaded from: http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf AES may be used in soft_irq context, but MMX/SSE context can not be touched safely in soft_irq context. So in_interrupt() is checked, if in IRQ or soft_irq context, the general x86_64 implementation are used instead. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 3 + arch/x86/crypto/aesni-intel_asm.S | 896 +++++++++++++++++++++++++++++++++++++ arch/x86/crypto/aesni-intel_glue.c | 461 +++++++++++++++++++ arch/x86/include/asm/cpufeature.h | 1 + crypto/Kconfig | 25 ++ 5 files changed, 1386 insertions(+) create mode 100644 arch/x86/crypto/aesni-intel_asm.S create mode 100644 arch/x86/crypto/aesni-intel_glue.c diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 903de4aa5094..ebe7deedd5b4 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o +obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o @@ -19,3 +20,5 @@ salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o + +aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S new file mode 100644 index 000000000000..caba99601703 --- /dev/null +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -0,0 +1,896 @@ +/* + * Implement AES algorithm in Intel AES-NI instructions. + * + * The white paper of AES-NI instructions can be downloaded from: + * http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf + * + * Copyright (C) 2008, Intel Corp. + * Author: Huang Ying + * Vinodh Gopal + * Kahraman Akdemir + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +.text + +#define STATE1 %xmm0 +#define STATE2 %xmm4 +#define STATE3 %xmm5 +#define STATE4 %xmm6 +#define STATE STATE1 +#define IN1 %xmm1 +#define IN2 %xmm7 +#define IN3 %xmm8 +#define IN4 %xmm9 +#define IN IN1 +#define KEY %xmm2 +#define IV %xmm3 + +#define KEYP %rdi +#define OUTP %rsi +#define INP %rdx +#define LEN %rcx +#define IVP %r8 +#define KLEN %r9d +#define T1 %r10 +#define TKEYP T1 +#define T2 %r11 + +_key_expansion_128: +_key_expansion_256a: + pshufd $0b11111111, %xmm1, %xmm1 + shufps $0b00010000, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + shufps $0b10001100, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + pxor %xmm1, %xmm0 + movaps %xmm0, (%rcx) + add $0x10, %rcx + ret + +_key_expansion_192a: + pshufd $0b01010101, %xmm1, %xmm1 + shufps $0b00010000, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + shufps $0b10001100, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + pxor %xmm1, %xmm0 + + movaps %xmm2, %xmm5 + movaps %xmm2, %xmm6 + pslldq $4, %xmm5 + pshufd $0b11111111, %xmm0, %xmm3 + pxor %xmm3, %xmm2 + pxor %xmm5, %xmm2 + + movaps %xmm0, %xmm1 + shufps $0b01000100, %xmm0, %xmm6 + movaps %xmm6, (%rcx) + shufps $0b01001110, %xmm2, %xmm1 + movaps %xmm1, 16(%rcx) + add $0x20, %rcx + ret + +_key_expansion_192b: + pshufd $0b01010101, %xmm1, %xmm1 + shufps $0b00010000, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + shufps $0b10001100, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + pxor %xmm1, %xmm0 + + movaps %xmm2, %xmm5 + pslldq $4, %xmm5 + pshufd $0b11111111, %xmm0, %xmm3 + pxor %xmm3, %xmm2 + pxor %xmm5, %xmm2 + + movaps %xmm0, (%rcx) + add $0x10, %rcx + ret + +_key_expansion_256b: + pshufd $0b10101010, %xmm1, %xmm1 + shufps $0b00010000, %xmm2, %xmm4 + pxor %xmm4, %xmm2 + shufps $0b10001100, %xmm2, %xmm4 + pxor %xmm4, %xmm2 + pxor %xmm1, %xmm2 + movaps %xmm2, (%rcx) + add $0x10, %rcx + ret + +/* + * int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key, + * unsigned int key_len) + */ +ENTRY(aesni_set_key) + movups (%rsi), %xmm0 # user key (first 16 bytes) + movaps %xmm0, (%rdi) + lea 0x10(%rdi), %rcx # key addr + movl %edx, 480(%rdi) + pxor %xmm4, %xmm4 # xmm4 is assumed 0 in _key_expansion_x + cmp $24, %dl + jb .Lenc_key128 + je .Lenc_key192 + movups 0x10(%rsi), %xmm2 # other user key + movaps %xmm2, (%rcx) + add $0x10, %rcx + # aeskeygenassist $0x1, %xmm2, %xmm1 # round 1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01 + call _key_expansion_256a + # aeskeygenassist $0x1, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01 + call _key_expansion_256b + # aeskeygenassist $0x2, %xmm2, %xmm1 # round 2 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02 + call _key_expansion_256a + # aeskeygenassist $0x2, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02 + call _key_expansion_256b + # aeskeygenassist $0x4, %xmm2, %xmm1 # round 3 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04 + call _key_expansion_256a + # aeskeygenassist $0x4, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04 + call _key_expansion_256b + # aeskeygenassist $0x8, %xmm2, %xmm1 # round 4 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08 + call _key_expansion_256a + # aeskeygenassist $0x8, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08 + call _key_expansion_256b + # aeskeygenassist $0x10, %xmm2, %xmm1 # round 5 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10 + call _key_expansion_256a + # aeskeygenassist $0x10, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10 + call _key_expansion_256b + # aeskeygenassist $0x20, %xmm2, %xmm1 # round 6 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20 + call _key_expansion_256a + # aeskeygenassist $0x20, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20 + call _key_expansion_256b + # aeskeygenassist $0x40, %xmm2, %xmm1 # round 7 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40 + call _key_expansion_256a + jmp .Ldec_key +.Lenc_key192: + movq 0x10(%rsi), %xmm2 # other user key + # aeskeygenassist $0x1, %xmm2, %xmm1 # round 1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01 + call _key_expansion_192a + # aeskeygenassist $0x2, %xmm2, %xmm1 # round 2 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02 + call _key_expansion_192b + # aeskeygenassist $0x4, %xmm2, %xmm1 # round 3 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04 + call _key_expansion_192a + # aeskeygenassist $0x8, %xmm2, %xmm1 # round 4 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08 + call _key_expansion_192b + # aeskeygenassist $0x10, %xmm2, %xmm1 # round 5 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10 + call _key_expansion_192a + # aeskeygenassist $0x20, %xmm2, %xmm1 # round 6 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20 + call _key_expansion_192b + # aeskeygenassist $0x40, %xmm2, %xmm1 # round 7 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40 + call _key_expansion_192a + # aeskeygenassist $0x80, %xmm2, %xmm1 # round 8 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x80 + call _key_expansion_192b + jmp .Ldec_key +.Lenc_key128: + # aeskeygenassist $0x1, %xmm0, %xmm1 # round 1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01 + call _key_expansion_128 + # aeskeygenassist $0x2, %xmm0, %xmm1 # round 2 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02 + call _key_expansion_128 + # aeskeygenassist $0x4, %xmm0, %xmm1 # round 3 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04 + call _key_expansion_128 + # aeskeygenassist $0x8, %xmm0, %xmm1 # round 4 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08 + call _key_expansion_128 + # aeskeygenassist $0x10, %xmm0, %xmm1 # round 5 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10 + call _key_expansion_128 + # aeskeygenassist $0x20, %xmm0, %xmm1 # round 6 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20 + call _key_expansion_128 + # aeskeygenassist $0x40, %xmm0, %xmm1 # round 7 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x40 + call _key_expansion_128 + # aeskeygenassist $0x80, %xmm0, %xmm1 # round 8 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x80 + call _key_expansion_128 + # aeskeygenassist $0x1b, %xmm0, %xmm1 # round 9 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x1b + call _key_expansion_128 + # aeskeygenassist $0x36, %xmm0, %xmm1 # round 10 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x36 + call _key_expansion_128 +.Ldec_key: + sub $0x10, %rcx + movaps (%rdi), %xmm0 + movaps (%rcx), %xmm1 + movaps %xmm0, 240(%rcx) + movaps %xmm1, 240(%rdi) + add $0x10, %rdi + lea 240-16(%rcx), %rsi +.align 4 +.Ldec_key_loop: + movaps (%rdi), %xmm0 + # aesimc %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x38, 0xdb, 0xc8 + movaps %xmm1, (%rsi) + add $0x10, %rdi + sub $0x10, %rsi + cmp %rcx, %rdi + jb .Ldec_key_loop + xor %rax, %rax + ret + +/* + * void aesni_enc(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) + */ +ENTRY(aesni_enc) + movl 480(KEYP), KLEN # key length + movups (INP), STATE # input + call _aesni_enc1 + movups STATE, (OUTP) # output + ret + +/* + * _aesni_enc1: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: round count + * STATE: initial state (input) + * output: + * STATE: finial state (output) + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_enc1: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE # round 0 + add $0x30, TKEYP + cmp $24, KLEN + jb .Lenc128 + lea 0x20(TKEYP), TKEYP + je .Lenc192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps -0x50(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 +.align 4 +.Lenc192: + movaps -0x40(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps -0x30(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 +.align 4 +.Lenc128: + movaps -0x20(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps -0x10(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps (TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x10(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x20(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x30(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x40(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x50(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x60(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x70(TKEYP), KEY + # aesenclast KEY, STATE # last round + .byte 0x66, 0x0f, 0x38, 0xdd, 0xc2 + ret + +/* + * _aesni_enc4: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: round count + * STATE1: initial state (input) + * STATE2 + * STATE3 + * STATE4 + * output: + * STATE1: finial state (output) + * STATE2 + * STATE3 + * STATE4 + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_enc4: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE1 # round 0 + pxor KEY, STATE2 + pxor KEY, STATE3 + pxor KEY, STATE4 + add $0x30, TKEYP + cmp $24, KLEN + jb .L4enc128 + lea 0x20(TKEYP), TKEYP + je .L4enc192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps -0x50(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 +#.align 4 +.L4enc192: + movaps -0x40(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps -0x30(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 +#.align 4 +.L4enc128: + movaps -0x20(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps -0x10(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps (TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x10(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x20(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x30(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x40(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x50(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x60(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x70(TKEYP), KEY + # aesenclast KEY, STATE1 # last round + .byte 0x66, 0x0f, 0x38, 0xdd, 0xc2 + # aesenclast KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdd, 0xe2 + # aesenclast KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdd, 0xea + # aesenclast KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdd, 0xf2 + ret + +/* + * void aesni_dec (struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) + */ +ENTRY(aesni_dec) + mov 480(KEYP), KLEN # key length + add $240, KEYP + movups (INP), STATE # input + call _aesni_dec1 + movups STATE, (OUTP) #output + ret + +/* + * _aesni_dec1: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: key length + * STATE: initial state (input) + * output: + * STATE: finial state (output) + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_dec1: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE # round 0 + add $0x30, TKEYP + cmp $24, KLEN + jb .Ldec128 + lea 0x20(TKEYP), TKEYP + je .Ldec192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps -0x50(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 +.align 4 +.Ldec192: + movaps -0x40(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps -0x30(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 +.align 4 +.Ldec128: + movaps -0x20(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps -0x10(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps (TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x10(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x20(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x30(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x40(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x50(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x60(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x70(TKEYP), KEY + # aesdeclast KEY, STATE # last round + .byte 0x66, 0x0f, 0x38, 0xdf, 0xc2 + ret + +/* + * _aesni_dec4: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: key length + * STATE1: initial state (input) + * STATE2 + * STATE3 + * STATE4 + * output: + * STATE1: finial state (output) + * STATE2 + * STATE3 + * STATE4 + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_dec4: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE1 # round 0 + pxor KEY, STATE2 + pxor KEY, STATE3 + pxor KEY, STATE4 + add $0x30, TKEYP + cmp $24, KLEN + jb .L4dec128 + lea 0x20(TKEYP), TKEYP + je .L4dec192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps -0x50(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 +.align 4 +.L4dec192: + movaps -0x40(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps -0x30(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 +.align 4 +.L4dec128: + movaps -0x20(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps -0x10(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps (TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x10(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x20(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x30(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x40(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x50(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x60(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x70(TKEYP), KEY + # aesdeclast KEY, STATE1 # last round + .byte 0x66, 0x0f, 0x38, 0xdf, 0xc2 + # aesdeclast KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdf, 0xe2 + # aesdeclast KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdf, 0xea + # aesdeclast KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdf, 0xf2 + ret + +/* + * void aesni_ecb_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len) + */ +ENTRY(aesni_ecb_enc) + test LEN, LEN # check length + jz .Lecb_enc_ret + mov 480(KEYP), KLEN + cmp $16, LEN + jb .Lecb_enc_ret + cmp $64, LEN + jb .Lecb_enc_loop1 +.align 4 +.Lecb_enc_loop4: + movups (INP), STATE1 + movups 0x10(INP), STATE2 + movups 0x20(INP), STATE3 + movups 0x30(INP), STATE4 + call _aesni_enc4 + movups STATE1, (OUTP) + movups STATE2, 0x10(OUTP) + movups STATE3, 0x20(OUTP) + movups STATE4, 0x30(OUTP) + sub $64, LEN + add $64, INP + add $64, OUTP + cmp $64, LEN + jge .Lecb_enc_loop4 + cmp $16, LEN + jb .Lecb_enc_ret +.align 4 +.Lecb_enc_loop1: + movups (INP), STATE1 + call _aesni_enc1 + movups STATE1, (OUTP) + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lecb_enc_loop1 +.Lecb_enc_ret: + ret + +/* + * void aesni_ecb_dec(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len); + */ +ENTRY(aesni_ecb_dec) + test LEN, LEN + jz .Lecb_dec_ret + mov 480(KEYP), KLEN + add $240, KEYP + cmp $16, LEN + jb .Lecb_dec_ret + cmp $64, LEN + jb .Lecb_dec_loop1 +.align 4 +.Lecb_dec_loop4: + movups (INP), STATE1 + movups 0x10(INP), STATE2 + movups 0x20(INP), STATE3 + movups 0x30(INP), STATE4 + call _aesni_dec4 + movups STATE1, (OUTP) + movups STATE2, 0x10(OUTP) + movups STATE3, 0x20(OUTP) + movups STATE4, 0x30(OUTP) + sub $64, LEN + add $64, INP + add $64, OUTP + cmp $64, LEN + jge .Lecb_dec_loop4 + cmp $16, LEN + jb .Lecb_dec_ret +.align 4 +.Lecb_dec_loop1: + movups (INP), STATE1 + call _aesni_dec1 + movups STATE1, (OUTP) + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lecb_dec_loop1 +.Lecb_dec_ret: + ret + +/* + * void aesni_cbc_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len, u8 *iv) + */ +ENTRY(aesni_cbc_enc) + cmp $16, LEN + jb .Lcbc_enc_ret + mov 480(KEYP), KLEN + movups (IVP), STATE # load iv as initial state +.align 4 +.Lcbc_enc_loop: + movups (INP), IN # load input + pxor IN, STATE + call _aesni_enc1 + movups STATE, (OUTP) # store output + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lcbc_enc_loop + movups STATE, (IVP) +.Lcbc_enc_ret: + ret + +/* + * void aesni_cbc_dec(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len, u8 *iv) + */ +ENTRY(aesni_cbc_dec) + cmp $16, LEN + jb .Lcbc_dec_ret + mov 480(KEYP), KLEN + add $240, KEYP + movups (IVP), IV + cmp $64, LEN + jb .Lcbc_dec_loop1 +.align 4 +.Lcbc_dec_loop4: + movups (INP), IN1 + movaps IN1, STATE1 + movups 0x10(INP), IN2 + movaps IN2, STATE2 + movups 0x20(INP), IN3 + movaps IN3, STATE3 + movups 0x30(INP), IN4 + movaps IN4, STATE4 + call _aesni_dec4 + pxor IV, STATE1 + pxor IN1, STATE2 + pxor IN2, STATE3 + pxor IN3, STATE4 + movaps IN4, IV + movups STATE1, (OUTP) + movups STATE2, 0x10(OUTP) + movups STATE3, 0x20(OUTP) + movups STATE4, 0x30(OUTP) + sub $64, LEN + add $64, INP + add $64, OUTP + cmp $64, LEN + jge .Lcbc_dec_loop4 + cmp $16, LEN + jb .Lcbc_dec_ret +.align 4 +.Lcbc_dec_loop1: + movups (INP), IN + movaps IN, STATE + call _aesni_dec1 + pxor IV, STATE + movups STATE, (OUTP) + movaps IN, IV + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lcbc_dec_loop1 + movups IV, (IVP) +.Lcbc_dec_ret: + ret diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c new file mode 100644 index 000000000000..02af0af65497 --- /dev/null +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -0,0 +1,461 @@ +/* + * Support for Intel AES-NI instructions. This file contains glue + * code, the real AES implementation is in intel-aes_asm.S. + * + * Copyright (C) 2008, Intel Corp. + * Author: Huang Ying + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct async_aes_ctx { + struct cryptd_ablkcipher *cryptd_tfm; +}; + +#define AESNI_ALIGN 16 +#define AES_BLOCK_MASK (~(AES_BLOCK_SIZE-1)) + +asmlinkage int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key, + unsigned int key_len); +asmlinkage void aesni_enc(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in); +asmlinkage void aesni_dec(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in); +asmlinkage void aesni_ecb_enc(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len); +asmlinkage void aesni_ecb_dec(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len); +asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len, u8 *iv); +asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len, u8 *iv); + +static inline int kernel_fpu_using(void) +{ + if (in_interrupt() && !(read_cr0() & X86_CR0_TS)) + return 1; + return 0; +} + +static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx) +{ + unsigned long addr = (unsigned long)raw_ctx; + unsigned long align = AESNI_ALIGN; + + if (align <= crypto_tfm_ctx_alignment()) + align = 1; + return (struct crypto_aes_ctx *)ALIGN(addr, align); +} + +static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx, + const u8 *in_key, unsigned int key_len) +{ + struct crypto_aes_ctx *ctx = aes_ctx(raw_ctx); + u32 *flags = &tfm->crt_flags; + int err; + + if (key_len != AES_KEYSIZE_128 && key_len != AES_KEYSIZE_192 && + key_len != AES_KEYSIZE_256) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + if (kernel_fpu_using()) + err = crypto_aes_expand_key(ctx, in_key, key_len); + else { + kernel_fpu_begin(); + err = aesni_set_key(ctx, in_key, key_len); + kernel_fpu_end(); + } + + return err; +} + +static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + return aes_set_key_common(tfm, crypto_tfm_ctx(tfm), in_key, key_len); +} + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm)); + + if (kernel_fpu_using()) + crypto_aes_encrypt_x86(ctx, dst, src); + else { + kernel_fpu_begin(); + aesni_enc(ctx, dst, src); + kernel_fpu_end(); + } +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm)); + + if (kernel_fpu_using()) + crypto_aes_decrypt_x86(ctx, dst, src); + else { + kernel_fpu_begin(); + aesni_dec(ctx, dst, src); + kernel_fpu_end(); + } +} + +static struct crypto_alg aesni_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-aesni", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1, + .cra_alignmask = 0, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aesni_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt + } + } +}; + +static int ecb_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_ecb_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static int ecb_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_ecb_dec(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static struct crypto_alg blk_ecb_alg = { + .cra_name = "__ecb-aes-aesni", + .cra_driver_name = "__driver-ecb-aes-aesni", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1, + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_ecb_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_set_key, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, + }, + }, +}; + +static int cbc_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_cbc_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK, walk.iv); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static int cbc_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_cbc_dec(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK, walk.iv); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static struct crypto_alg blk_cbc_alg = { + .cra_name = "__cbc-aes-aesni", + .cra_driver_name = "__driver-cbc-aes-aesni", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1, + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_cbc_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_set_key, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, + }, + }, +}; + +static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len) +{ + struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + return crypto_ablkcipher_setkey(&ctx->cryptd_tfm->base, key, key_len); +} + +static int ablk_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (kernel_fpu_using()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + return crypto_ablkcipher_encrypt(cryptd_req); + } else { + struct blkcipher_desc desc; + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + return crypto_blkcipher_crt(desc.tfm)->encrypt( + &desc, req->dst, req->src, req->nbytes); + } +} + +static int ablk_decrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (kernel_fpu_using()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + return crypto_ablkcipher_decrypt(cryptd_req); + } else { + struct blkcipher_desc desc; + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + return crypto_blkcipher_crt(desc.tfm)->decrypt( + &desc, req->dst, req->src, req->nbytes); + } +} + +static void ablk_exit(struct crypto_tfm *tfm) +{ + struct async_aes_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ablkcipher(ctx->cryptd_tfm); +} + +static void ablk_init_common(struct crypto_tfm *tfm, + struct cryptd_ablkcipher *cryptd_tfm) +{ + struct async_aes_ctx *ctx = crypto_tfm_ctx(tfm); + + ctx->cryptd_tfm = cryptd_tfm; + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) + + crypto_ablkcipher_reqsize(&cryptd_tfm->base); +} + +static int ablk_ecb_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-ecb-aes-aesni", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_ecb_alg = { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-aesni", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_aes_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_ecb_alg.cra_list), + .cra_init = ablk_ecb_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int ablk_cbc_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-cbc-aes-aesni", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_cbc_alg = { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-aesni", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_aes_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_cbc_alg.cra_list), + .cra_init = ablk_cbc_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int __init aesni_init(void) +{ + int err; + + if (!cpu_has_aes) { + printk(KERN_ERR "Intel AES-NI instructions are not detected.\n"); + return -ENODEV; + } + if ((err = crypto_register_alg(&aesni_alg))) + goto aes_err; + if ((err = crypto_register_alg(&blk_ecb_alg))) + goto blk_ecb_err; + if ((err = crypto_register_alg(&blk_cbc_alg))) + goto blk_cbc_err; + if ((err = crypto_register_alg(&ablk_ecb_alg))) + goto ablk_ecb_err; + if ((err = crypto_register_alg(&ablk_cbc_alg))) + goto ablk_cbc_err; + + return err; + +ablk_cbc_err: + crypto_unregister_alg(&ablk_ecb_alg); +ablk_ecb_err: + crypto_unregister_alg(&blk_cbc_alg); +blk_cbc_err: + crypto_unregister_alg(&blk_ecb_alg); +blk_ecb_err: + crypto_unregister_alg(&aesni_alg); +aes_err: + return err; +} + +static void __exit aesni_exit(void) +{ + crypto_unregister_alg(&ablk_cbc_alg); + crypto_unregister_alg(&ablk_ecb_alg); + crypto_unregister_alg(&blk_cbc_alg); + crypto_unregister_alg(&blk_ecb_alg); + crypto_unregister_alg(&aesni_alg); +} + +module_init(aesni_init); +module_exit(aesni_exit); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, Intel AES-NI instructions optimized"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("aes"); diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 7301e60dc4a8..0beba0d1468d 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -213,6 +213,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_xmm boot_cpu_has(X86_FEATURE_XMM) #define cpu_has_xmm2 boot_cpu_has(X86_FEATURE_XMM2) #define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3) +#define cpu_has_aes boot_cpu_has(X86_FEATURE_AES) #define cpu_has_ht boot_cpu_has(X86_FEATURE_HT) #define cpu_has_mp boot_cpu_has(X86_FEATURE_MP) #define cpu_has_nx boot_cpu_has(X86_FEATURE_NX) diff --git a/crypto/Kconfig b/crypto/Kconfig index 8dde4fcf99c9..a83ce0462b6b 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -470,6 +470,31 @@ config CRYPTO_AES_X86_64 See for more information. +config CRYPTO_AES_NI_INTEL + tristate "AES cipher algorithms (AES-NI)" + depends on (X86 || UML_X86) && 64BIT + select CRYPTO_AES_X86_64 + select CRYPTO_CRYPTD + select CRYPTO_ALGAPI + help + Use Intel AES-NI instructions for AES algorithm. + + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + The AES specifies three key sizes: 128, 192 and 256 bits + + See for more information. + config CRYPTO_ANUBIS tristate "Anubis cipher algorithm" select CRYPTO_ALGAPI -- cgit v1.2.3 From d7992f42c61d5dc6d164f7dddd05284485204ada Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 28 Jan 2009 15:20:51 +1100 Subject: crypto: ansi_cprng - Force reset on allocation Pseudo RNGs provide predictable outputs based on input parateters {key, V, DT}, the idea behind them is that only the user should know what the inputs are. While its nice to have default known values for testing purposes, it seems dangerous to allow the use of those default values without some sort of safety measure in place, lest an attacker easily guess the output of the cprng. This patch forces the NEED_RESET flag on when allocating a cprng context, so that any user is forced to reseed it before use. The defaults can still be used for testing, but this will prevent their inadvertent use, and be more secure. Signed-off-by: Neil Horman Signed-off-by: Herbert Xu --- crypto/ansi_cprng.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c index 0fac8ffc2fb7..74478061ac0c 100644 --- a/crypto/ansi_cprng.c +++ b/crypto/ansi_cprng.c @@ -338,7 +338,16 @@ static int cprng_init(struct crypto_tfm *tfm) spin_lock_init(&ctx->prng_lock); - return reset_prng_context(ctx, NULL, DEFAULT_PRNG_KSZ, NULL, NULL); + if (reset_prng_context(ctx, NULL, DEFAULT_PRNG_KSZ, NULL, NULL) < 0) + return -EINVAL; + + /* + * after allocation, we should always force the user to reset + * so they don't inadvertently use the insecure default values + * without specifying them intentially + */ + ctx->flags |= PRNG_NEED_RESET; + return 0; } static void cprng_exit(struct crypto_tfm *tfm) -- cgit v1.2.3 From 9749598633efc2561224954217ff0d70aeed8b50 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 3 Feb 2009 12:47:44 +1100 Subject: crypto: shash - Add crypto_shash_blocksize This function is needed by algorithms that don't know their own block size, e.g., in s390 where the code is common between multiple versions of SHA. Signed-off-by: Herbert Xu --- include/crypto/hash.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/crypto/hash.h b/include/crypto/hash.h index d797e119e3d5..d56bb71617c3 100644 --- a/include/crypto/hash.h +++ b/include/crypto/hash.h @@ -231,6 +231,11 @@ static inline unsigned int crypto_shash_alignmask( return crypto_tfm_alg_alignmask(crypto_shash_tfm(tfm)); } +static inline unsigned int crypto_shash_blocksize(struct crypto_shash *tfm) +{ + return crypto_tfm_alg_blocksize(crypto_shash_tfm(tfm)); +} + static inline struct shash_alg *__crypto_shash_alg(struct crypto_alg *alg) { return container_of(alg, struct shash_alg, base); -- cgit v1.2.3 From 563f346d04e8373739240604a51ce8529dd9f07e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 18 Jan 2009 20:33:33 +1100 Subject: crypto: sha-s390 - Switch to shash This patch converts the S390 sha algorithms to the new shash interface. With fixes by Jan Glauber. Signed-off-by: Herbert Xu --- arch/s390/crypto/sha.h | 6 ++-- arch/s390/crypto/sha1_s390.c | 40 +++++++++++---------- arch/s390/crypto/sha256_s390.c | 40 +++++++++++---------- arch/s390/crypto/sha512_s390.c | 80 ++++++++++++++++++++++-------------------- arch/s390/crypto/sha_common.c | 20 ++++++----- drivers/crypto/Kconfig | 6 ++-- 6 files changed, 103 insertions(+), 89 deletions(-) diff --git a/arch/s390/crypto/sha.h b/arch/s390/crypto/sha.h index 1ceafa571eab..f4e9dc71675f 100644 --- a/arch/s390/crypto/sha.h +++ b/arch/s390/crypto/sha.h @@ -29,7 +29,9 @@ struct s390_sha_ctx { int func; /* KIMD function to use */ }; -void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len); -void s390_sha_final(struct crypto_tfm *tfm, u8 *out); +struct shash_desc; + +int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len); +int s390_sha_final(struct shash_desc *desc, u8 *out); #endif diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c index b3cb5a89b00d..e85ba348722a 100644 --- a/arch/s390/crypto/sha1_s390.c +++ b/arch/s390/crypto/sha1_s390.c @@ -23,17 +23,17 @@ * any later version. * */ +#include #include #include -#include #include #include "crypt_s390.h" #include "sha.h" -static void sha1_init(struct crypto_tfm *tfm) +static int sha1_init(struct shash_desc *desc) { - struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *sctx = shash_desc_ctx(desc); sctx->state[0] = SHA1_H0; sctx->state[1] = SHA1_H1; @@ -42,34 +42,36 @@ static void sha1_init(struct crypto_tfm *tfm) sctx->state[4] = SHA1_H4; sctx->count = 0; sctx->func = KIMD_SHA_1; + + return 0; } -static struct crypto_alg alg = { - .cra_name = "sha1", - .cra_driver_name= "sha1-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA1_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA1_DIGEST_SIZE, - .dia_init = sha1_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha1", + .cra_driver_name= "sha1-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } }; static int __init sha1_s390_init(void) { if (!crypt_s390_func_available(KIMD_SHA_1)) return -EOPNOTSUPP; - return crypto_register_alg(&alg); + return crypto_register_shash(&alg); } static void __exit sha1_s390_fini(void) { - crypto_unregister_alg(&alg); + crypto_unregister_shash(&alg); } module_init(sha1_s390_init); diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c index 19c03fb6ba7e..f9fefc569632 100644 --- a/arch/s390/crypto/sha256_s390.c +++ b/arch/s390/crypto/sha256_s390.c @@ -16,17 +16,17 @@ * any later version. * */ +#include #include #include -#include #include #include "crypt_s390.h" #include "sha.h" -static void sha256_init(struct crypto_tfm *tfm) +static int sha256_init(struct shash_desc *desc) { - struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *sctx = shash_desc_ctx(desc); sctx->state[0] = SHA256_H0; sctx->state[1] = SHA256_H1; @@ -38,22 +38,24 @@ static void sha256_init(struct crypto_tfm *tfm) sctx->state[7] = SHA256_H7; sctx->count = 0; sctx->func = KIMD_SHA_256; + + return 0; } -static struct crypto_alg alg = { - .cra_name = "sha256", - .cra_driver_name = "sha256-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA256_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA256_DIGEST_SIZE, - .dia_init = sha256_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg alg = { + .digestsize = SHA256_DIGEST_SIZE, + .init = sha256_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha256", + .cra_driver_name= "sha256-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } }; static int sha256_s390_init(void) @@ -61,12 +63,12 @@ static int sha256_s390_init(void) if (!crypt_s390_func_available(KIMD_SHA_256)) return -EOPNOTSUPP; - return crypto_register_alg(&alg); + return crypto_register_shash(&alg); } static void __exit sha256_s390_fini(void) { - crypto_unregister_alg(&alg); + crypto_unregister_shash(&alg); } module_init(sha256_s390_init); diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c index 23c7861f6aeb..420acf41b727 100644 --- a/arch/s390/crypto/sha512_s390.c +++ b/arch/s390/crypto/sha512_s390.c @@ -12,16 +12,16 @@ * any later version. * */ +#include #include #include -#include #include "sha.h" #include "crypt_s390.h" -static void sha512_init(struct crypto_tfm *tfm) +static int sha512_init(struct shash_desc *desc) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); *(__u64 *)&ctx->state[0] = 0x6a09e667f3bcc908ULL; *(__u64 *)&ctx->state[2] = 0xbb67ae8584caa73bULL; @@ -33,29 +33,31 @@ static void sha512_init(struct crypto_tfm *tfm) *(__u64 *)&ctx->state[14] = 0x5be0cd19137e2179ULL; ctx->count = 0; ctx->func = KIMD_SHA_512; + + return 0; } -static struct crypto_alg sha512_alg = { - .cra_name = "sha512", - .cra_driver_name = "sha512-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA512_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(sha512_alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA512_DIGEST_SIZE, - .dia_init = sha512_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg sha512_alg = { + .digestsize = SHA512_DIGEST_SIZE, + .init = sha512_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha512", + .cra_driver_name= "sha512-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } }; MODULE_ALIAS("sha512"); -static void sha384_init(struct crypto_tfm *tfm) +static int sha384_init(struct shash_desc *desc) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); *(__u64 *)&ctx->state[0] = 0xcbbb9d5dc1059ed8ULL; *(__u64 *)&ctx->state[2] = 0x629a292a367cd507ULL; @@ -67,22 +69,24 @@ static void sha384_init(struct crypto_tfm *tfm) *(__u64 *)&ctx->state[14] = 0x47b5481dbefa4fa4ULL; ctx->count = 0; ctx->func = KIMD_SHA_512; + + return 0; } -static struct crypto_alg sha384_alg = { - .cra_name = "sha384", - .cra_driver_name = "sha384-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA384_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(sha384_alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA384_DIGEST_SIZE, - .dia_init = sha384_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg sha384_alg = { + .digestsize = SHA384_DIGEST_SIZE, + .init = sha384_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha384", + .cra_driver_name= "sha384-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_ctxsize = sizeof(struct s390_sha_ctx), + .cra_module = THIS_MODULE, + } }; MODULE_ALIAS("sha384"); @@ -93,18 +97,18 @@ static int __init init(void) if (!crypt_s390_func_available(KIMD_SHA_512)) return -EOPNOTSUPP; - if ((ret = crypto_register_alg(&sha512_alg)) < 0) + if ((ret = crypto_register_shash(&sha512_alg)) < 0) goto out; - if ((ret = crypto_register_alg(&sha384_alg)) < 0) - crypto_unregister_alg(&sha512_alg); + if ((ret = crypto_register_shash(&sha384_alg)) < 0) + crypto_unregister_shash(&sha512_alg); out: return ret; } static void __exit fini(void) { - crypto_unregister_alg(&sha512_alg); - crypto_unregister_alg(&sha384_alg); + crypto_unregister_shash(&sha512_alg); + crypto_unregister_shash(&sha384_alg); } module_init(init); diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c index 9d6eb8c3d37e..7903ec47e6b9 100644 --- a/arch/s390/crypto/sha_common.c +++ b/arch/s390/crypto/sha_common.c @@ -13,14 +13,14 @@ * */ -#include +#include #include "sha.h" #include "crypt_s390.h" -void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len) +int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); - unsigned int bsize = crypto_tfm_alg_blocksize(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); + unsigned int bsize = crypto_shash_blocksize(desc->tfm); unsigned int index; int ret; @@ -51,13 +51,15 @@ void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len) store: if (len) memcpy(ctx->buf + index , data, len); + + return 0; } EXPORT_SYMBOL_GPL(s390_sha_update); -void s390_sha_final(struct crypto_tfm *tfm, u8 *out) +int s390_sha_final(struct shash_desc *desc, u8 *out) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); - unsigned int bsize = crypto_tfm_alg_blocksize(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); + unsigned int bsize = crypto_shash_blocksize(desc->tfm); u64 bits; unsigned int index, end, plen; int ret; @@ -87,9 +89,11 @@ void s390_sha_final(struct crypto_tfm *tfm, u8 *out) BUG_ON(ret != end); /* copy digest to out */ - memcpy(out, ctx->state, crypto_hash_digestsize(crypto_hash_cast(tfm))); + memcpy(out, ctx->state, crypto_shash_digestsize(desc->tfm)); /* wipe context */ memset(ctx, 0, sizeof *ctx); + + return 0; } EXPORT_SYMBOL_GPL(s390_sha_final); diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index e522144cba3a..5adbae71454f 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -86,7 +86,7 @@ config ZCRYPT_MONOLITHIC config CRYPTO_SHA1_S390 tristate "SHA1 digest algorithm" depends on S390 - select CRYPTO_ALGAPI + select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). @@ -94,7 +94,7 @@ config CRYPTO_SHA1_S390 config CRYPTO_SHA256_S390 tristate "SHA256 digest algorithm" depends on S390 - select CRYPTO_ALGAPI + select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the SHA256 secure hash standard (DFIPS 180-2). @@ -105,7 +105,7 @@ config CRYPTO_SHA256_S390 config CRYPTO_SHA512_S390 tristate "SHA384 and SHA512 digest algorithm" depends on S390 - select CRYPTO_ALGAPI + select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the SHA512 secure hash standard. -- cgit v1.2.3 From c5b1e545a567c52081239bd5d187669640d0146f Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 5 Feb 2009 16:01:38 +1100 Subject: crypto: ansi_cprng - Panic on CPRNG test failure when in FIPS mode FIPS 140-2 specifies that all access to various cryptographic modules be prevented in the event that any of the provided self tests fail on the various implemented algorithms. We already panic when any of the test in testmgr.c fail when we are operating in fips mode. The continuous test in the cprng here was missed when that was implmented. This code simply checks for the fips_enabled flag if the test fails, and warns us via syslog or panics the box accordingly. Signed-off-by: Neil Horman Signed-off-by: Herbert Xu --- crypto/ansi_cprng.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c index 74478061ac0c..d80ed4c1e009 100644 --- a/crypto/ansi_cprng.c +++ b/crypto/ansi_cprng.c @@ -132,9 +132,15 @@ static int _get_more_prng_bytes(struct prng_context *ctx) */ if (!memcmp(ctx->rand_data, ctx->last_rand_data, DEFAULT_BLK_SZ)) { + if (fips_enabled) { + panic("cprng %p Failed repetition check!\n", + ctx); + } + printk(KERN_ERR "ctx %p Failed repetition check!\n", ctx); + ctx->flags |= PRNG_NEED_RESET; return -EINVAL; } -- cgit v1.2.3 From 5b07bd57016fb1033c678746f90bfc3c12d3e494 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 5 Feb 2009 16:03:04 +1100 Subject: crypto: ansi_cprng - Add maintainer Add myself as the maintainer for the CPRNG. Herbert shouldn't deal with it alone if (when?) it breaks :) Signed-off-by: Neil Horman Signed-off-by: Herbert Xu --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index db65b4e6d132..9b11517e5be5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1262,6 +1262,12 @@ L: linux-crypto@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git S: Maintained +CRYPTOGRAPHIC RANDOM NUMBER GENERATOR +P: Neil Horman +M: nhorman@tuxdriver.com +L: linux-crypto@vger.kernel.org +S: Maintained + CS5535 Audio ALSA driver P: Jaya Kumar M: jayakumar.alsa@gmail.com -- cgit v1.2.3 From 049359d655277c382683a6030ae0bac485568ffc Mon Sep 17 00:00:00 2001 From: James Hsiao Date: Thu, 5 Feb 2009 16:18:13 +1100 Subject: crypto: amcc - Add crypt4xx driver This patch adds support for AMCC ppc4xx security device driver. This is the initial release that includes the driver framework with AES and SHA1 algorithms support. The remaining algorithms will be released in the near future. Signed-off-by: James Hsiao Signed-off-by: Herbert Xu --- arch/powerpc/boot/dts/canyonlands.dts | 7 + arch/powerpc/boot/dts/kilauea.dts | 7 + drivers/crypto/Kconfig | 9 + drivers/crypto/Makefile | 1 + drivers/crypto/amcc/Makefile | 2 + drivers/crypto/amcc/crypto4xx_alg.c | 293 +++++++ drivers/crypto/amcc/crypto4xx_core.c | 1310 +++++++++++++++++++++++++++++++ drivers/crypto/amcc/crypto4xx_core.h | 177 +++++ drivers/crypto/amcc/crypto4xx_reg_def.h | 284 +++++++ drivers/crypto/amcc/crypto4xx_sa.c | 108 +++ drivers/crypto/amcc/crypto4xx_sa.h | 243 ++++++ 11 files changed, 2441 insertions(+) create mode 100644 drivers/crypto/amcc/Makefile create mode 100644 drivers/crypto/amcc/crypto4xx_alg.c create mode 100644 drivers/crypto/amcc/crypto4xx_core.c create mode 100644 drivers/crypto/amcc/crypto4xx_core.h create mode 100644 drivers/crypto/amcc/crypto4xx_reg_def.h create mode 100644 drivers/crypto/amcc/crypto4xx_sa.c create mode 100644 drivers/crypto/amcc/crypto4xx_sa.h diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 8b5ba8261a36..4447def69dc5 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -127,6 +127,13 @@ dcr-reg = <0x010 0x002>; }; + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 2804444812e5..5e6b08ff6f67 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -97,6 +97,13 @@ 0x6 0x4>; /* ECC SEC Error */ }; + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 5adbae71454f..01afd758072f 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -200,4 +200,13 @@ config CRYPTO_DEV_IXP4XX help Driver for the IXP4xx NPE crypto engine. +config CRYPTO_DEV_PPC4XX + tristate "Driver AMCC PPC4xx crypto accelerator" + depends on PPC && 4xx + select CRYPTO_HASH + select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER + help + This option allows you to have support for AMCC crypto acceleration. + endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index 73557b2968d3..9bf4a2bc8846 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o +obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/ diff --git a/drivers/crypto/amcc/Makefile b/drivers/crypto/amcc/Makefile new file mode 100644 index 000000000000..aa376e8d5ed5 --- /dev/null +++ b/drivers/crypto/amcc/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += crypto4xx.o +crypto4xx-objs := crypto4xx_core.o crypto4xx_alg.o crypto4xx_sa.o diff --git a/drivers/crypto/amcc/crypto4xx_alg.c b/drivers/crypto/amcc/crypto4xx_alg.c new file mode 100644 index 000000000000..61b6e1bec8c6 --- /dev/null +++ b/drivers/crypto/amcc/crypto4xx_alg.c @@ -0,0 +1,293 @@ +/** + * AMCC SoC PPC4xx Crypto Driver + * + * Copyright (c) 2008 Applied Micro Circuits Corporation. + * All rights reserved. James Hsiao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This file implements the Linux crypto algorithms. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "crypto4xx_reg_def.h" +#include "crypto4xx_sa.h" +#include "crypto4xx_core.h" + +void set_dynamic_sa_command_0(struct dynamic_sa_ctl *sa, u32 save_h, + u32 save_iv, u32 ld_h, u32 ld_iv, u32 hdr_proc, + u32 h, u32 c, u32 pad_type, u32 op_grp, u32 op, + u32 dir) +{ + sa->sa_command_0.w = 0; + sa->sa_command_0.bf.save_hash_state = save_h; + sa->sa_command_0.bf.save_iv = save_iv; + sa->sa_command_0.bf.load_hash_state = ld_h; + sa->sa_command_0.bf.load_iv = ld_iv; + sa->sa_command_0.bf.hdr_proc = hdr_proc; + sa->sa_command_0.bf.hash_alg = h; + sa->sa_command_0.bf.cipher_alg = c; + sa->sa_command_0.bf.pad_type = pad_type & 3; + sa->sa_command_0.bf.extend_pad = pad_type >> 2; + sa->sa_command_0.bf.op_group = op_grp; + sa->sa_command_0.bf.opcode = op; + sa->sa_command_0.bf.dir = dir; +} + +void set_dynamic_sa_command_1(struct dynamic_sa_ctl *sa, u32 cm, u32 hmac_mc, + u32 cfb, u32 esn, u32 sn_mask, u32 mute, + u32 cp_pad, u32 cp_pay, u32 cp_hdr) +{ + sa->sa_command_1.w = 0; + sa->sa_command_1.bf.crypto_mode31 = (cm & 4) >> 2; + sa->sa_command_1.bf.crypto_mode9_8 = cm & 3; + sa->sa_command_1.bf.feedback_mode = cfb, + sa->sa_command_1.bf.sa_rev = 1; + sa->sa_command_1.bf.extended_seq_num = esn; + sa->sa_command_1.bf.seq_num_mask = sn_mask; + sa->sa_command_1.bf.mutable_bit_proc = mute; + sa->sa_command_1.bf.copy_pad = cp_pad; + sa->sa_command_1.bf.copy_payload = cp_pay; + sa->sa_command_1.bf.copy_hdr = cp_hdr; +} + +int crypto4xx_encrypt(struct ablkcipher_request *req) +{ + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + + ctx->direction = DIR_OUTBOUND; + ctx->hash_final = 0; + ctx->is_hash = 0; + ctx->pd_ctl = 0x1; + + return crypto4xx_build_pd(&req->base, ctx, req->src, req->dst, + req->nbytes, req->info, + get_dynamic_sa_iv_size(ctx)); +} + +int crypto4xx_decrypt(struct ablkcipher_request *req) +{ + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + + ctx->direction = DIR_INBOUND; + ctx->hash_final = 0; + ctx->is_hash = 0; + ctx->pd_ctl = 1; + + return crypto4xx_build_pd(&req->base, ctx, req->src, req->dst, + req->nbytes, req->info, + get_dynamic_sa_iv_size(ctx)); +} + +/** + * AES Functions + */ +static int crypto4xx_setkey_aes(struct crypto_ablkcipher *cipher, + const u8 *key, + unsigned int keylen, + unsigned char cm, + u8 fb) +{ + struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher); + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(tfm); + struct dynamic_sa_ctl *sa; + int rc; + + if (keylen != AES_KEYSIZE_256 && + keylen != AES_KEYSIZE_192 && keylen != AES_KEYSIZE_128) { + crypto_ablkcipher_set_flags(cipher, + CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; + } + + /* Create SA */ + if (ctx->sa_in_dma_addr || ctx->sa_out_dma_addr) + crypto4xx_free_sa(ctx); + + rc = crypto4xx_alloc_sa(ctx, SA_AES128_LEN + (keylen-16) / 4); + if (rc) + return rc; + + if (ctx->state_record_dma_addr == 0) { + rc = crypto4xx_alloc_state_record(ctx); + if (rc) { + crypto4xx_free_sa(ctx); + return rc; + } + } + /* Setup SA */ + sa = (struct dynamic_sa_ctl *) ctx->sa_in; + ctx->hash_final = 0; + + set_dynamic_sa_command_0(sa, SA_NOT_SAVE_HASH, SA_NOT_SAVE_IV, + SA_LOAD_HASH_FROM_SA, SA_LOAD_IV_FROM_STATE, + SA_NO_HEADER_PROC, SA_HASH_ALG_NULL, + SA_CIPHER_ALG_AES, SA_PAD_TYPE_ZERO, + SA_OP_GROUP_BASIC, SA_OPCODE_DECRYPT, + DIR_INBOUND); + + set_dynamic_sa_command_1(sa, cm, SA_HASH_MODE_HASH, + fb, SA_EXTENDED_SN_OFF, + SA_SEQ_MASK_OFF, SA_MC_ENABLE, + SA_NOT_COPY_PAD, SA_NOT_COPY_PAYLOAD, + SA_NOT_COPY_HDR); + crypto4xx_memcpy_le(ctx->sa_in + get_dynamic_sa_offset_key_field(ctx), + key, keylen); + sa->sa_contents = SA_AES_CONTENTS | (keylen << 2); + sa->sa_command_1.bf.key_len = keylen >> 3; + ctx->is_hash = 0; + ctx->direction = DIR_INBOUND; + memcpy(ctx->sa_in + get_dynamic_sa_offset_state_ptr_field(ctx), + (void *)&ctx->state_record_dma_addr, 4); + ctx->offset_to_sr_ptr = get_dynamic_sa_offset_state_ptr_field(ctx); + + memcpy(ctx->sa_out, ctx->sa_in, ctx->sa_len * 4); + sa = (struct dynamic_sa_ctl *) ctx->sa_out; + sa->sa_command_0.bf.dir = DIR_OUTBOUND; + + return 0; +} + +int crypto4xx_setkey_aes_cbc(struct crypto_ablkcipher *cipher, + const u8 *key, unsigned int keylen) +{ + return crypto4xx_setkey_aes(cipher, key, keylen, CRYPTO_MODE_CBC, + CRYPTO_FEEDBACK_MODE_NO_FB); +} + +/** + * HASH SHA1 Functions + */ +static int crypto4xx_hash_alg_init(struct crypto_tfm *tfm, + unsigned int sa_len, + unsigned char ha, + unsigned char hm) +{ + struct crypto_alg *alg = tfm->__crt_alg; + struct crypto4xx_alg *my_alg = crypto_alg_to_crypto4xx_alg(alg); + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(tfm); + struct dynamic_sa_ctl *sa; + struct dynamic_sa_hash160 *sa_in; + int rc; + + ctx->dev = my_alg->dev; + ctx->is_hash = 1; + ctx->hash_final = 0; + + /* Create SA */ + if (ctx->sa_in_dma_addr || ctx->sa_out_dma_addr) + crypto4xx_free_sa(ctx); + + rc = crypto4xx_alloc_sa(ctx, sa_len); + if (rc) + return rc; + + if (ctx->state_record_dma_addr == 0) { + crypto4xx_alloc_state_record(ctx); + if (!ctx->state_record_dma_addr) { + crypto4xx_free_sa(ctx); + return -ENOMEM; + } + } + + tfm->crt_ahash.reqsize = sizeof(struct crypto4xx_ctx); + sa = (struct dynamic_sa_ctl *) ctx->sa_in; + set_dynamic_sa_command_0(sa, SA_SAVE_HASH, SA_NOT_SAVE_IV, + SA_NOT_LOAD_HASH, SA_LOAD_IV_FROM_SA, + SA_NO_HEADER_PROC, ha, SA_CIPHER_ALG_NULL, + SA_PAD_TYPE_ZERO, SA_OP_GROUP_BASIC, + SA_OPCODE_HASH, DIR_INBOUND); + set_dynamic_sa_command_1(sa, 0, SA_HASH_MODE_HASH, + CRYPTO_FEEDBACK_MODE_NO_FB, SA_EXTENDED_SN_OFF, + SA_SEQ_MASK_OFF, SA_MC_ENABLE, + SA_NOT_COPY_PAD, SA_NOT_COPY_PAYLOAD, + SA_NOT_COPY_HDR); + ctx->direction = DIR_INBOUND; + sa->sa_contents = SA_HASH160_CONTENTS; + sa_in = (struct dynamic_sa_hash160 *) ctx->sa_in; + /* Need to zero hash digest in SA */ + memset(sa_in->inner_digest, 0, sizeof(sa_in->inner_digest)); + memset(sa_in->outer_digest, 0, sizeof(sa_in->outer_digest)); + sa_in->state_ptr = ctx->state_record_dma_addr; + ctx->offset_to_sr_ptr = get_dynamic_sa_offset_state_ptr_field(ctx); + + return 0; +} + +int crypto4xx_hash_init(struct ahash_request *req) +{ + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + int ds; + struct dynamic_sa_ctl *sa; + + sa = (struct dynamic_sa_ctl *) ctx->sa_in; + ds = crypto_ahash_digestsize( + __crypto_ahash_cast(req->base.tfm)); + sa->sa_command_0.bf.digest_len = ds >> 2; + sa->sa_command_0.bf.load_hash_state = SA_LOAD_HASH_FROM_SA; + ctx->is_hash = 1; + ctx->direction = DIR_INBOUND; + + return 0; +} + +int crypto4xx_hash_update(struct ahash_request *req) +{ + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + + ctx->is_hash = 1; + ctx->hash_final = 0; + ctx->pd_ctl = 0x11; + ctx->direction = DIR_INBOUND; + + return crypto4xx_build_pd(&req->base, ctx, req->src, + (struct scatterlist *) req->result, + req->nbytes, NULL, 0); +} + +int crypto4xx_hash_final(struct ahash_request *req) +{ + return 0; +} + +int crypto4xx_hash_digest(struct ahash_request *req) +{ + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(req->base.tfm); + + ctx->hash_final = 1; + ctx->pd_ctl = 0x11; + ctx->direction = DIR_INBOUND; + + return crypto4xx_build_pd(&req->base, ctx, req->src, + (struct scatterlist *) req->result, + req->nbytes, NULL, 0); +} + +/** + * SHA1 Algorithm + */ +int crypto4xx_sha1_alg_init(struct crypto_tfm *tfm) +{ + return crypto4xx_hash_alg_init(tfm, SA_HASH160_LEN, SA_HASH_ALG_SHA1, + SA_HASH_MODE_HASH); +} + + diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c new file mode 100644 index 000000000000..4c0dfb2b872e --- /dev/null +++ b/drivers/crypto/amcc/crypto4xx_core.c @@ -0,0 +1,1310 @@ +/** + * AMCC SoC PPC4xx Crypto Driver + * + * Copyright (c) 2008 Applied Micro Circuits Corporation. + * All rights reserved. James Hsiao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This file implements AMCC crypto offload Linux device driver for use with + * Linux CryptoAPI. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "crypto4xx_reg_def.h" +#include "crypto4xx_core.h" +#include "crypto4xx_sa.h" + +#define PPC4XX_SEC_VERSION_STR "0.5" + +/** + * PPC4xx Crypto Engine Initialization Routine + */ +static void crypto4xx_hw_init(struct crypto4xx_device *dev) +{ + union ce_ring_size ring_size; + union ce_ring_contol ring_ctrl; + union ce_part_ring_size part_ring_size; + union ce_io_threshold io_threshold; + u32 rand_num; + union ce_pe_dma_cfg pe_dma_cfg; + + writel(PPC4XX_BYTE_ORDER, dev->ce_base + CRYPTO4XX_BYTE_ORDER_CFG); + /* setup pe dma, include reset sg, pdr and pe, then release reset */ + pe_dma_cfg.w = 0; + pe_dma_cfg.bf.bo_sgpd_en = 1; + pe_dma_cfg.bf.bo_data_en = 0; + pe_dma_cfg.bf.bo_sa_en = 1; + pe_dma_cfg.bf.bo_pd_en = 1; + pe_dma_cfg.bf.dynamic_sa_en = 1; + pe_dma_cfg.bf.reset_sg = 1; + pe_dma_cfg.bf.reset_pdr = 1; + pe_dma_cfg.bf.reset_pe = 1; + writel(pe_dma_cfg.w, dev->ce_base + CRYPTO4XX_PE_DMA_CFG); + /* un reset pe,sg and pdr */ + pe_dma_cfg.bf.pe_mode = 0; + pe_dma_cfg.bf.reset_sg = 0; + pe_dma_cfg.bf.reset_pdr = 0; + pe_dma_cfg.bf.reset_pe = 0; + pe_dma_cfg.bf.bo_td_en = 0; + writel(pe_dma_cfg.w, dev->ce_base + CRYPTO4XX_PE_DMA_CFG); + writel(dev->pdr_pa, dev->ce_base + CRYPTO4XX_PDR_BASE); + writel(dev->pdr_pa, dev->ce_base + CRYPTO4XX_RDR_BASE); + writel(PPC4XX_PRNG_CTRL_AUTO_EN, dev->ce_base + CRYPTO4XX_PRNG_CTRL); + get_random_bytes(&rand_num, sizeof(rand_num)); + writel(rand_num, dev->ce_base + CRYPTO4XX_PRNG_SEED_L); + get_random_bytes(&rand_num, sizeof(rand_num)); + writel(rand_num, dev->ce_base + CRYPTO4XX_PRNG_SEED_H); + ring_size.w = 0; + ring_size.bf.ring_offset = PPC4XX_PD_SIZE; + ring_size.bf.ring_size = PPC4XX_NUM_PD; + writel(ring_size.w, dev->ce_base + CRYPTO4XX_RING_SIZE); + ring_ctrl.w = 0; + writel(ring_ctrl.w, dev->ce_base + CRYPTO4XX_RING_CTRL); + writel(PPC4XX_DC_3DES_EN, dev->ce_base + CRYPTO4XX_DEVICE_CTRL); + writel(dev->gdr_pa, dev->ce_base + CRYPTO4XX_GATH_RING_BASE); + writel(dev->sdr_pa, dev->ce_base + CRYPTO4XX_SCAT_RING_BASE); + part_ring_size.w = 0; + part_ring_size.bf.sdr_size = PPC4XX_SDR_SIZE; + part_ring_size.bf.gdr_size = PPC4XX_GDR_SIZE; + writel(part_ring_size.w, dev->ce_base + CRYPTO4XX_PART_RING_SIZE); + writel(PPC4XX_SD_BUFFER_SIZE, dev->ce_base + CRYPTO4XX_PART_RING_CFG); + io_threshold.w = 0; + io_threshold.bf.output_threshold = PPC4XX_OUTPUT_THRESHOLD; + io_threshold.bf.input_threshold = PPC4XX_INPUT_THRESHOLD; + writel(io_threshold.w, dev->ce_base + CRYPTO4XX_IO_THRESHOLD); + writel(0, dev->ce_base + CRYPTO4XX_PDR_BASE_UADDR); + writel(0, dev->ce_base + CRYPTO4XX_RDR_BASE_UADDR); + writel(0, dev->ce_base + CRYPTO4XX_PKT_SRC_UADDR); + writel(0, dev->ce_base + CRYPTO4XX_PKT_DEST_UADDR); + writel(0, dev->ce_base + CRYPTO4XX_SA_UADDR); + writel(0, dev->ce_base + CRYPTO4XX_GATH_RING_BASE_UADDR); + writel(0, dev->ce_base + CRYPTO4XX_SCAT_RING_BASE_UADDR); + /* un reset pe,sg and pdr */ + pe_dma_cfg.bf.pe_mode = 1; + pe_dma_cfg.bf.reset_sg = 0; + pe_dma_cfg.bf.reset_pdr = 0; + pe_dma_cfg.bf.reset_pe = 0; + pe_dma_cfg.bf.bo_td_en = 0; + writel(pe_dma_cfg.w, dev->ce_base + CRYPTO4XX_PE_DMA_CFG); + /*clear all pending interrupt*/ + writel(PPC4XX_INTERRUPT_CLR, dev->ce_base + CRYPTO4XX_INT_CLR); + writel(PPC4XX_INT_DESCR_CNT, dev->ce_base + CRYPTO4XX_INT_DESCR_CNT); + writel(PPC4XX_INT_DESCR_CNT, dev->ce_base + CRYPTO4XX_INT_DESCR_CNT); + writel(PPC4XX_INT_CFG, dev->ce_base + CRYPTO4XX_INT_CFG); + writel(PPC4XX_PD_DONE_INT, dev->ce_base + CRYPTO4XX_INT_EN); +} + +int crypto4xx_alloc_sa(struct crypto4xx_ctx *ctx, u32 size) +{ + ctx->sa_in = dma_alloc_coherent(ctx->dev->core_dev->device, size * 4, + &ctx->sa_in_dma_addr, GFP_ATOMIC); + if (ctx->sa_in == NULL) + return -ENOMEM; + + ctx->sa_out = dma_alloc_coherent(ctx->dev->core_dev->device, size * 4, + &ctx->sa_out_dma_addr, GFP_ATOMIC); + if (ctx->sa_out == NULL) { + dma_free_coherent(ctx->dev->core_dev->device, + ctx->sa_len * 4, + ctx->sa_in, ctx->sa_in_dma_addr); + return -ENOMEM; + } + + memset(ctx->sa_in, 0, size * 4); + memset(ctx->sa_out, 0, size * 4); + ctx->sa_len = size; + + return 0; +} + +void crypto4xx_free_sa(struct crypto4xx_ctx *ctx) +{ + if (ctx->sa_in != NULL) + dma_free_coherent(ctx->dev->core_dev->device, ctx->sa_len * 4, + ctx->sa_in, ctx->sa_in_dma_addr); + if (ctx->sa_out != NULL) + dma_free_coherent(ctx->dev->core_dev->device, ctx->sa_len * 4, + ctx->sa_out, ctx->sa_out_dma_addr); + + ctx->sa_in_dma_addr = 0; + ctx->sa_out_dma_addr = 0; + ctx->sa_len = 0; +} + +u32 crypto4xx_alloc_state_record(struct crypto4xx_ctx *ctx) +{ + ctx->state_record = dma_alloc_coherent(ctx->dev->core_dev->device, + sizeof(struct sa_state_record), + &ctx->state_record_dma_addr, GFP_ATOMIC); + if (!ctx->state_record_dma_addr) + return -ENOMEM; + memset(ctx->state_record, 0, sizeof(struct sa_state_record)); + + return 0; +} + +void crypto4xx_free_state_record(struct crypto4xx_ctx *ctx) +{ + if (ctx->state_record != NULL) + dma_free_coherent(ctx->dev->core_dev->device, + sizeof(struct sa_state_record), + ctx->state_record, + ctx->state_record_dma_addr); + ctx->state_record_dma_addr = 0; +} + +/** + * alloc memory for the gather ring + * no need to alloc buf for the ring + * gdr_tail, gdr_head and gdr_count are initialized by this function + */ +static u32 crypto4xx_build_pdr(struct crypto4xx_device *dev) +{ + int i; + struct pd_uinfo *pd_uinfo; + dev->pdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_pd) * PPC4XX_NUM_PD, + &dev->pdr_pa, GFP_ATOMIC); + if (!dev->pdr) + return -ENOMEM; + + dev->pdr_uinfo = kzalloc(sizeof(struct pd_uinfo) * PPC4XX_NUM_PD, + GFP_KERNEL); + if (!dev->pdr_uinfo) { + dma_free_coherent(dev->core_dev->device, + sizeof(struct ce_pd) * PPC4XX_NUM_PD, + dev->pdr, + dev->pdr_pa); + return -ENOMEM; + } + memset(dev->pdr, 0, sizeof(struct ce_pd) * PPC4XX_NUM_PD); + dev->shadow_sa_pool = dma_alloc_coherent(dev->core_dev->device, + 256 * PPC4XX_NUM_PD, + &dev->shadow_sa_pool_pa, + GFP_ATOMIC); + if (!dev->shadow_sa_pool) + return -ENOMEM; + + dev->shadow_sr_pool = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct sa_state_record) * PPC4XX_NUM_PD, + &dev->shadow_sr_pool_pa, GFP_ATOMIC); + if (!dev->shadow_sr_pool) + return -ENOMEM; + for (i = 0; i < PPC4XX_NUM_PD; i++) { + pd_uinfo = (struct pd_uinfo *) (dev->pdr_uinfo + + sizeof(struct pd_uinfo) * i); + + /* alloc 256 bytes which is enough for any kind of dynamic sa */ + pd_uinfo->sa_va = dev->shadow_sa_pool + 256 * i; + pd_uinfo->sa_pa = dev->shadow_sa_pool_pa + 256 * i; + + /* alloc state record */ + pd_uinfo->sr_va = dev->shadow_sr_pool + + sizeof(struct sa_state_record) * i; + pd_uinfo->sr_pa = dev->shadow_sr_pool_pa + + sizeof(struct sa_state_record) * i; + } + + return 0; +} + +static void crypto4xx_destroy_pdr(struct crypto4xx_device *dev) +{ + if (dev->pdr != NULL) + dma_free_coherent(dev->core_dev->device, + sizeof(struct ce_pd) * PPC4XX_NUM_PD, + dev->pdr, dev->pdr_pa); + if (dev->shadow_sa_pool) + dma_free_coherent(dev->core_dev->device, 256 * PPC4XX_NUM_PD, + dev->shadow_sa_pool, dev->shadow_sa_pool_pa); + if (dev->shadow_sr_pool) + dma_free_coherent(dev->core_dev->device, + sizeof(struct sa_state_record) * PPC4XX_NUM_PD, + dev->shadow_sr_pool, dev->shadow_sr_pool_pa); + + kfree(dev->pdr_uinfo); +} + +static u32 crypto4xx_get_pd_from_pdr_nolock(struct crypto4xx_device *dev) +{ + u32 retval; + u32 tmp; + + retval = dev->pdr_head; + tmp = (dev->pdr_head + 1) % PPC4XX_NUM_PD; + + if (tmp == dev->pdr_tail) + return ERING_WAS_FULL; + + dev->pdr_head = tmp; + + return retval; +} + +static u32 crypto4xx_put_pd_to_pdr(struct crypto4xx_device *dev, u32 idx) +{ + struct pd_uinfo *pd_uinfo; + unsigned long flags; + + pd_uinfo = (struct pd_uinfo *)(dev->pdr_uinfo + + sizeof(struct pd_uinfo) * idx); + spin_lock_irqsave(&dev->core_dev->lock, flags); + if (dev->pdr_tail != PPC4XX_LAST_PD) + dev->pdr_tail++; + else + dev->pdr_tail = 0; + pd_uinfo->state = PD_ENTRY_FREE; + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + + return 0; +} + +static struct ce_pd *crypto4xx_get_pdp(struct crypto4xx_device *dev, + dma_addr_t *pd_dma, u32 idx) +{ + *pd_dma = dev->pdr_pa + sizeof(struct ce_pd) * idx; + + return dev->pdr + sizeof(struct ce_pd) * idx; +} + +/** + * alloc memory for the gather ring + * no need to alloc buf for the ring + * gdr_tail, gdr_head and gdr_count are initialized by this function + */ +static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev) +{ + dev->gdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_gd) * PPC4XX_NUM_GD, + &dev->gdr_pa, GFP_ATOMIC); + if (!dev->gdr) + return -ENOMEM; + + memset(dev->gdr, 0, sizeof(struct ce_gd) * PPC4XX_NUM_GD); + + return 0; +} + +static inline void crypto4xx_destroy_gdr(struct crypto4xx_device *dev) +{ + dma_free_coherent(dev->core_dev->device, + sizeof(struct ce_gd) * PPC4XX_NUM_GD, + dev->gdr, dev->gdr_pa); +} + +/* + * when this function is called. + * preemption or interrupt must be disabled + */ +u32 crypto4xx_get_n_gd(struct crypto4xx_device *dev, int n) +{ + u32 retval; + u32 tmp; + if (n >= PPC4XX_NUM_GD) + return ERING_WAS_FULL; + + retval = dev->gdr_head; + tmp = (dev->gdr_head + n) % PPC4XX_NUM_GD; + if (dev->gdr_head > dev->gdr_tail) { + if (tmp < dev->gdr_head && tmp >= dev->gdr_tail) + return ERING_WAS_FULL; + } else if (dev->gdr_head < dev->gdr_tail) { + if (tmp < dev->gdr_head || tmp >= dev->gdr_tail) + return ERING_WAS_FULL; + } + dev->gdr_head = tmp; + + return retval; +} + +static u32 crypto4xx_put_gd_to_gdr(struct crypto4xx_device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->core_dev->lock, flags); + if (dev->gdr_tail == dev->gdr_head) { + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + return 0; + } + + if (dev->gdr_tail != PPC4XX_LAST_GD) + dev->gdr_tail++; + else + dev->gdr_tail = 0; + + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + + return 0; +} + +static inline struct ce_gd *crypto4xx_get_gdp(struct crypto4xx_device *dev, + dma_addr_t *gd_dma, u32 idx) +{ + *gd_dma = dev->gdr_pa + sizeof(struct ce_gd) * idx; + + return (struct ce_gd *) (dev->gdr + sizeof(struct ce_gd) * idx); +} + +/** + * alloc memory for the scatter ring + * need to alloc buf for the ring + * sdr_tail, sdr_head and sdr_count are initialized by this function + */ +static u32 crypto4xx_build_sdr(struct crypto4xx_device *dev) +{ + int i; + struct ce_sd *sd_array; + + /* alloc memory for scatter descriptor ring */ + dev->sdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_sd) * PPC4XX_NUM_SD, + &dev->sdr_pa, GFP_ATOMIC); + if (!dev->sdr) + return -ENOMEM; + + dev->scatter_buffer_size = PPC4XX_SD_BUFFER_SIZE; + dev->scatter_buffer_va = + dma_alloc_coherent(dev->core_dev->device, + dev->scatter_buffer_size * PPC4XX_NUM_SD, + &dev->scatter_buffer_pa, GFP_ATOMIC); + if (!dev->scatter_buffer_va) { + dma_free_coherent(dev->core_dev->device, + sizeof(struct ce_sd) * PPC4XX_NUM_SD, + dev->sdr, dev->sdr_pa); + return -ENOMEM; + } + + sd_array = dev->sdr; + + for (i = 0; i < PPC4XX_NUM_SD; i++) { + sd_array[i].ptr = dev->scatter_buffer_pa + + dev->scatter_buffer_size * i; + } + + return 0; +} + +static void crypto4xx_destroy_sdr(struct crypto4xx_device *dev) +{ + if (dev->sdr != NULL) + dma_free_coherent(dev->core_dev->device, + sizeof(struct ce_sd) * PPC4XX_NUM_SD, + dev->sdr, dev->sdr_pa); + + if (dev->scatter_buffer_va != NULL) + dma_free_coherent(dev->core_dev->device, + dev->scatter_buffer_size * PPC4XX_NUM_SD, + dev->scatter_buffer_va, + dev->scatter_buffer_pa); +} + +/* + * when this function is called. + * preemption or interrupt must be disabled + */ +static u32 crypto4xx_get_n_sd(struct crypto4xx_device *dev, int n) +{ + u32 retval; + u32 tmp; + + if (n >= PPC4XX_NUM_SD) + return ERING_WAS_FULL; + + retval = dev->sdr_head; + tmp = (dev->sdr_head + n) % PPC4XX_NUM_SD; + if (dev->sdr_head > dev->gdr_tail) { + if (tmp < dev->sdr_head && tmp >= dev->sdr_tail) + return ERING_WAS_FULL; + } else if (dev->sdr_head < dev->sdr_tail) { + if (tmp < dev->sdr_head || tmp >= dev->sdr_tail) + return ERING_WAS_FULL; + } /* the head = tail, or empty case is already take cared */ + dev->sdr_head = tmp; + + return retval; +} + +static u32 crypto4xx_put_sd_to_sdr(struct crypto4xx_device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->core_dev->lock, flags); + if (dev->sdr_tail == dev->sdr_head) { + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + return 0; + } + if (dev->sdr_tail != PPC4XX_LAST_SD) + dev->sdr_tail++; + else + dev->sdr_tail = 0; + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + + return 0; +} + +static inline struct ce_sd *crypto4xx_get_sdp(struct crypto4xx_device *dev, + dma_addr_t *sd_dma, u32 idx) +{ + *sd_dma = dev->sdr_pa + sizeof(struct ce_sd) * idx; + + return (struct ce_sd *)(dev->sdr + sizeof(struct ce_sd) * idx); +} + +static u32 crypto4xx_fill_one_page(struct crypto4xx_device *dev, + dma_addr_t *addr, u32 *length, + u32 *idx, u32 *offset, u32 *nbytes) +{ + u32 len; + + if (*length > dev->scatter_buffer_size) { + memcpy(phys_to_virt(*addr), + dev->scatter_buffer_va + + *idx * dev->scatter_buffer_size + *offset, + dev->scatter_buffer_size); + *offset = 0; + *length -= dev->scatter_buffer_size; + *nbytes -= dev->scatter_buffer_size; + if (*idx == PPC4XX_LAST_SD) + *idx = 0; + else + (*idx)++; + *addr = *addr + dev->scatter_buffer_size; + return 1; + } else if (*length < dev->scatter_buffer_size) { + memcpy(phys_to_virt(*addr), + dev->scatter_buffer_va + + *idx * dev->scatter_buffer_size + *offset, *length); + if ((*offset + *length) == dev->scatter_buffer_size) { + if (*idx == PPC4XX_LAST_SD) + *idx = 0; + else + (*idx)++; + *nbytes -= *length; + *offset = 0; + } else { + *nbytes -= *length; + *offset += *length; + } + + return 0; + } else { + len = (*nbytes <= dev->scatter_buffer_size) ? + (*nbytes) : dev->scatter_buffer_size; + memcpy(phys_to_virt(*addr), + dev->scatter_buffer_va + + *idx * dev->scatter_buffer_size + *offset, + len); + *offset = 0; + *nbytes -= len; + + if (*idx == PPC4XX_LAST_SD) + *idx = 0; + else + (*idx)++; + + return 0; + } +} + +static void crypto4xx_copy_pkt_to_dst(struct crypto4xx_device *dev, + struct ce_pd *pd, + struct pd_uinfo *pd_uinfo, + u32 nbytes, + struct scatterlist *dst) +{ + dma_addr_t addr; + u32 this_sd; + u32 offset; + u32 len; + u32 i; + u32 sg_len; + struct scatterlist *sg; + + this_sd = pd_uinfo->first_sd; + offset = 0; + i = 0; + + while (nbytes) { + sg = &dst[i]; + sg_len = sg->length; + addr = dma_map_page(dev->core_dev->device, sg_page(sg), + sg->offset, sg->length, DMA_TO_DEVICE); + + if (offset == 0) { + len = (nbytes <= sg->length) ? nbytes : sg->length; + while (crypto4xx_fill_one_page(dev, &addr, &len, + &this_sd, &offset, &nbytes)) + ; + if (!nbytes) + return; + i++; + } else { + len = (nbytes <= (dev->scatter_buffer_size - offset)) ? + nbytes : (dev->scatter_buffer_size - offset); + len = (sg->length < len) ? sg->length : len; + while (crypto4xx_fill_one_page(dev, &addr, &len, + &this_sd, &offset, &nbytes)) + ; + if (!nbytes) + return; + sg_len -= len; + if (sg_len) { + addr += len; + while (crypto4xx_fill_one_page(dev, &addr, + &sg_len, &this_sd, &offset, &nbytes)) + ; + } + i++; + } + } +} + +static u32 crypto4xx_copy_digest_to_dst(struct pd_uinfo *pd_uinfo, + struct crypto4xx_ctx *ctx) +{ + struct dynamic_sa_ctl *sa = (struct dynamic_sa_ctl *) ctx->sa_in; + struct sa_state_record *state_record = + (struct sa_state_record *) pd_uinfo->sr_va; + + if (sa->sa_command_0.bf.hash_alg == SA_HASH_ALG_SHA1) { + memcpy((void *) pd_uinfo->dest_va, state_record->save_digest, + SA_HASH_ALG_SHA1_DIGEST_SIZE); + } + + return 0; +} + +static void crypto4xx_ret_sg_desc(struct crypto4xx_device *dev, + struct pd_uinfo *pd_uinfo) +{ + int i; + if (pd_uinfo->num_gd) { + for (i = 0; i < pd_uinfo->num_gd; i++) + crypto4xx_put_gd_to_gdr(dev); + pd_uinfo->first_gd = 0xffffffff; + pd_uinfo->num_gd = 0; + } + if (pd_uinfo->num_sd) { + for (i = 0; i < pd_uinfo->num_sd; i++) + crypto4xx_put_sd_to_sdr(dev); + + pd_uinfo->first_sd = 0xffffffff; + pd_uinfo->num_sd = 0; + } +} + +static u32 crypto4xx_ablkcipher_done(struct crypto4xx_device *dev, + struct pd_uinfo *pd_uinfo, + struct ce_pd *pd) +{ + struct crypto4xx_ctx *ctx; + struct ablkcipher_request *ablk_req; + struct scatterlist *dst; + dma_addr_t addr; + + ablk_req = ablkcipher_request_cast(pd_uinfo->async_req); + ctx = crypto_tfm_ctx(ablk_req->base.tfm); + + if (pd_uinfo->using_sd) { + crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo, ablk_req->nbytes, + ablk_req->dst); + } else { + dst = pd_uinfo->dest_va; + addr = dma_map_page(dev->core_dev->device, sg_page(dst), + dst->offset, dst->length, DMA_FROM_DEVICE); + } + crypto4xx_ret_sg_desc(dev, pd_uinfo); + if (ablk_req->base.complete != NULL) + ablk_req->base.complete(&ablk_req->base, 0); + + return 0; +} + +static u32 crypto4xx_ahash_done(struct crypto4xx_device *dev, + struct pd_uinfo *pd_uinfo) +{ + struct crypto4xx_ctx *ctx; + struct ahash_request *ahash_req; + + ahash_req = ahash_request_cast(pd_uinfo->async_req); + ctx = crypto_tfm_ctx(ahash_req->base.tfm); + + crypto4xx_copy_digest_to_dst(pd_uinfo, + crypto_tfm_ctx(ahash_req->base.tfm)); + crypto4xx_ret_sg_desc(dev, pd_uinfo); + /* call user provided callback function x */ + if (ahash_req->base.complete != NULL) + ahash_req->base.complete(&ahash_req->base, 0); + + return 0; +} + +static u32 crypto4xx_pd_done(struct crypto4xx_device *dev, u32 idx) +{ + struct ce_pd *pd; + struct pd_uinfo *pd_uinfo; + + pd = dev->pdr + sizeof(struct ce_pd)*idx; + pd_uinfo = dev->pdr_uinfo + sizeof(struct pd_uinfo)*idx; + if (crypto_tfm_alg_type(pd_uinfo->async_req->tfm) == + CRYPTO_ALG_TYPE_ABLKCIPHER) + return crypto4xx_ablkcipher_done(dev, pd_uinfo, pd); + else + return crypto4xx_ahash_done(dev, pd_uinfo); +} + +/** + * Note: Only use this function to copy items that is word aligned. + */ +void crypto4xx_memcpy_le(unsigned int *dst, + const unsigned char *buf, + int len) +{ + u8 *tmp; + for (; len >= 4; buf += 4, len -= 4) + *dst++ = cpu_to_le32(*(unsigned int *) buf); + + tmp = (u8 *)dst; + switch (len) { + case 3: + *tmp++ = 0; + *tmp++ = *(buf+2); + *tmp++ = *(buf+1); + *tmp++ = *buf; + break; + case 2: + *tmp++ = 0; + *tmp++ = 0; + *tmp++ = *(buf+1); + *tmp++ = *buf; + break; + case 1: + *tmp++ = 0; + *tmp++ = 0; + *tmp++ = 0; + *tmp++ = *buf; + break; + default: + break; + } +} + +static void crypto4xx_stop_all(struct crypto4xx_core_device *core_dev) +{ + crypto4xx_destroy_pdr(core_dev->dev); + crypto4xx_destroy_gdr(core_dev->dev); + crypto4xx_destroy_sdr(core_dev->dev); + dev_set_drvdata(core_dev->device, NULL); + iounmap(core_dev->dev->ce_base); + kfree(core_dev->dev); + kfree(core_dev); +} + +void crypto4xx_return_pd(struct crypto4xx_device *dev, + u32 pd_entry, struct ce_pd *pd, + struct pd_uinfo *pd_uinfo) +{ + /* irq should be already disabled */ + dev->pdr_head = pd_entry; + pd->pd_ctl.w = 0; + pd->pd_ctl_len.w = 0; + pd_uinfo->state = PD_ENTRY_FREE; +} + +/* + * derive number of elements in scatterlist + * Shamlessly copy from talitos.c + */ +static int get_sg_count(struct scatterlist *sg_list, int nbytes) +{ + struct scatterlist *sg = sg_list; + int sg_nents = 0; + + while (nbytes) { + sg_nents++; + if (sg->length > nbytes) + break; + nbytes -= sg->length; + sg = sg_next(sg); + } + + return sg_nents; +} + +static u32 get_next_gd(u32 current) +{ + if (current != PPC4XX_LAST_GD) + return current + 1; + else + return 0; +} + +static u32 get_next_sd(u32 current) +{ + if (current != PPC4XX_LAST_SD) + return current + 1; + else + return 0; +} + +u32 crypto4xx_build_pd(struct crypto_async_request *req, + struct crypto4xx_ctx *ctx, + struct scatterlist *src, + struct scatterlist *dst, + unsigned int datalen, + void *iv, u32 iv_len) +{ + struct crypto4xx_device *dev = ctx->dev; + dma_addr_t addr, pd_dma, sd_dma, gd_dma; + struct dynamic_sa_ctl *sa; + struct scatterlist *sg; + struct ce_gd *gd; + struct ce_pd *pd; + u32 num_gd, num_sd; + u32 fst_gd = 0xffffffff; + u32 fst_sd = 0xffffffff; + u32 pd_entry; + unsigned long flags; + struct pd_uinfo *pd_uinfo = NULL; + unsigned int nbytes = datalen, idx; + unsigned int ivlen = 0; + u32 gd_idx = 0; + + /* figure how many gd is needed */ + num_gd = get_sg_count(src, datalen); + if (num_gd == 1) + num_gd = 0; + + /* figure how many sd is needed */ + if (sg_is_last(dst) || ctx->is_hash) { + num_sd = 0; + } else { + if (datalen > PPC4XX_SD_BUFFER_SIZE) { + num_sd = datalen / PPC4XX_SD_BUFFER_SIZE; + if (datalen % PPC4XX_SD_BUFFER_SIZE) + num_sd++; + } else { + num_sd = 1; + } + } + + /* + * The follow section of code needs to be protected + * The gather ring and scatter ring needs to be consecutive + * In case of run out of any kind of descriptor, the descriptor + * already got must be return the original place. + */ + spin_lock_irqsave(&dev->core_dev->lock, flags); + if (num_gd) { + fst_gd = crypto4xx_get_n_gd(dev, num_gd); + if (fst_gd == ERING_WAS_FULL) { + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + return -EAGAIN; + } + } + if (num_sd) { + fst_sd = crypto4xx_get_n_sd(dev, num_sd); + if (fst_sd == ERING_WAS_FULL) { + if (num_gd) + dev->gdr_head = fst_gd; + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + return -EAGAIN; + } + } + pd_entry = crypto4xx_get_pd_from_pdr_nolock(dev); + if (pd_entry == ERING_WAS_FULL) { + if (num_gd) + dev->gdr_head = fst_gd; + if (num_sd) + dev->sdr_head = fst_sd; + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + return -EAGAIN; + } + spin_unlock_irqrestore(&dev->core_dev->lock, flags); + + pd_uinfo = (struct pd_uinfo *)(dev->pdr_uinfo + + sizeof(struct pd_uinfo) * pd_entry); + pd = crypto4xx_get_pdp(dev, &pd_dma, pd_entry); + pd_uinfo->async_req = req; + pd_uinfo->num_gd = num_gd; + pd_uinfo->num_sd = num_sd; + + if (iv_len || ctx->is_hash) { + ivlen = iv_len; + pd->sa = pd_uinfo->sa_pa; + sa = (struct dynamic_sa_ctl *) pd_uinfo->sa_va; + if (ctx->direction == DIR_INBOUND) + memcpy(sa, ctx->sa_in, ctx->sa_len * 4); + else + memcpy(sa, ctx->sa_out, ctx->sa_len * 4); + + memcpy((void *) sa + ctx->offset_to_sr_ptr, + &pd_uinfo->sr_pa, 4); + + if (iv_len) + crypto4xx_memcpy_le(pd_uinfo->sr_va, iv, iv_len); + } else { + if (ctx->direction == DIR_INBOUND) { + pd->sa = ctx->sa_in_dma_addr; + sa = (struct dynamic_sa_ctl *) ctx->sa_in; + } else { + pd->sa = ctx->sa_out_dma_addr; + sa = (struct dynamic_sa_ctl *) ctx->sa_out; + } + } + pd->sa_len = ctx->sa_len; + if (num_gd) { + /* get first gd we are going to use */ + gd_idx = fst_gd; + pd_uinfo->first_gd = fst_gd; + pd_uinfo->num_gd = num_gd; + gd = crypto4xx_get_gdp(dev, &gd_dma, gd_idx); + pd->src = gd_dma; + /* enable gather */ + sa->sa_command_0.bf.gather = 1; + idx = 0; + src = &src[0]; + /* walk the sg, and setup gather array */ + while (nbytes) { + sg = &src[idx]; + addr = dma_map_page(dev->core_dev->device, sg_page(sg), + sg->offset, sg->length, DMA_TO_DEVICE); + gd->ptr = addr; + gd->ctl_len.len = sg->length; + gd->ctl_len.done = 0; + gd->ctl_len.ready = 1; + if (sg->length >= nbytes) + break; + nbytes -= sg->length; + gd_idx = get_next_gd(gd_idx); + gd = crypto4xx_get_gdp(dev, &gd_dma, gd_idx); + idx++; + } + } else { + pd->src = (u32)dma_map_page(dev->core_dev->device, sg_page(src), + src->offset, src->length, DMA_TO_DEVICE); + /* + * Disable gather in sa command + */ + sa->sa_command_0.bf.gather = 0; + /* + * Indicate gather array is not used + */ + pd_uinfo->first_gd = 0xffffffff; + pd_uinfo->num_gd = 0; + } + if (ctx->is_hash || sg_is_last(dst)) { + /* + * we know application give us dst a whole piece of memory + * no need to use scatter ring. + * In case of is_hash, the icv is always at end of src data. + */ + pd_uinfo->using_sd = 0; + pd_uinfo->first_sd = 0xffffffff; + pd_uinfo->num_sd = 0; + pd_uinfo->dest_va = dst; + sa->sa_command_0.bf.scatter = 0; + if (ctx->is_hash) + pd->dest = virt_to_phys((void *)dst); + else + pd->dest = (u32)dma_map_page(dev->core_dev->device, + sg_page(dst), dst->offset, + dst->length, DMA_TO_DEVICE); + } else { + struct ce_sd *sd = NULL; + u32 sd_idx = fst_sd; + nbytes = datalen; + sa->sa_command_0.bf.scatter = 1; + pd_uinfo->using_sd = 1; + pd_uinfo->dest_va = dst; + pd_uinfo->first_sd = fst_sd; + pd_uinfo->num_sd = num_sd; + sd = crypto4xx_get_sdp(dev, &sd_dma, sd_idx); + pd->dest = sd_dma; + /* setup scatter descriptor */ + sd->ctl.done = 0; + sd->ctl.rdy = 1; + /* sd->ptr should be setup by sd_init routine*/ + idx = 0; + if (nbytes >= PPC4XX_SD_BUFFER_SIZE) + nbytes -= PPC4XX_SD_BUFFER_SIZE; + else + nbytes = 0; + while (nbytes) { + sd_idx = get_next_sd(sd_idx); + sd = crypto4xx_get_sdp(dev, &sd_dma, sd_idx); + /* setup scatter descriptor */ + sd->ctl.done = 0; + sd->ctl.rdy = 1; + if (nbytes >= PPC4XX_SD_BUFFER_SIZE) + nbytes -= PPC4XX_SD_BUFFER_SIZE; + else + /* + * SD entry can hold PPC4XX_SD_BUFFER_SIZE, + * which is more than nbytes, so done. + */ + nbytes = 0; + } + } + + sa->sa_command_1.bf.hash_crypto_offset = 0; + pd->pd_ctl.w = ctx->pd_ctl; + pd->pd_ctl_len.w = 0x00400000 | (ctx->bypass << 24) | datalen; + pd_uinfo->state = PD_ENTRY_INUSE; + wmb(); + /* write any value to push engine to read a pd */ + writel(1, dev->ce_base + CRYPTO4XX_INT_DESCR_RD); + return -EINPROGRESS; +} + +/** + * Algorithm Registration Functions + */ +static int crypto4xx_alg_init(struct crypto_tfm *tfm) +{ + struct crypto_alg *alg = tfm->__crt_alg; + struct crypto4xx_alg *amcc_alg = crypto_alg_to_crypto4xx_alg(alg); + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(tfm); + + ctx->dev = amcc_alg->dev; + ctx->sa_in = NULL; + ctx->sa_out = NULL; + ctx->sa_in_dma_addr = 0; + ctx->sa_out_dma_addr = 0; + ctx->sa_len = 0; + + if (alg->cra_type == &crypto_ablkcipher_type) + tfm->crt_ablkcipher.reqsize = sizeof(struct crypto4xx_ctx); + else if (alg->cra_type == &crypto_ahash_type) + tfm->crt_ahash.reqsize = sizeof(struct crypto4xx_ctx); + + return 0; +} + +static void crypto4xx_alg_exit(struct crypto_tfm *tfm) +{ + struct crypto4xx_ctx *ctx = crypto_tfm_ctx(tfm); + + crypto4xx_free_sa(ctx); + crypto4xx_free_state_record(ctx); +} + +int crypto4xx_register_alg(struct crypto4xx_device *sec_dev, + struct crypto_alg *crypto_alg, int array_size) +{ + struct crypto4xx_alg *alg; + int i; + int rc = 0; + + for (i = 0; i < array_size; i++) { + alg = kzalloc(sizeof(struct crypto4xx_alg), GFP_KERNEL); + if (!alg) + return -ENOMEM; + + alg->alg = crypto_alg[i]; + INIT_LIST_HEAD(&alg->alg.cra_list); + if (alg->alg.cra_init == NULL) + alg->alg.cra_init = crypto4xx_alg_init; + if (alg->alg.cra_exit == NULL) + alg->alg.cra_exit = crypto4xx_alg_exit; + alg->dev = sec_dev; + rc = crypto_register_alg(&alg->alg); + if (rc) { + list_del(&alg->entry); + kfree(alg); + } else { + list_add_tail(&alg->entry, &sec_dev->alg_list); + } + } + + return 0; +} + +static void crypto4xx_unregister_alg(struct crypto4xx_device *sec_dev) +{ + struct crypto4xx_alg *alg, *tmp; + + list_for_each_entry_safe(alg, tmp, &sec_dev->alg_list, entry) { + list_del(&alg->entry); + crypto_unregister_alg(&alg->alg); + kfree(alg); + } +} + +static void crypto4xx_bh_tasklet_cb(unsigned long data) +{ + struct device *dev = (struct device *)data; + struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev); + struct pd_uinfo *pd_uinfo; + struct ce_pd *pd; + u32 tail; + + while (core_dev->dev->pdr_head != core_dev->dev->pdr_tail) { + tail = core_dev->dev->pdr_tail; + pd_uinfo = core_dev->dev->pdr_uinfo + + sizeof(struct pd_uinfo)*tail; + pd = core_dev->dev->pdr + sizeof(struct ce_pd) * tail; + if ((pd_uinfo->state == PD_ENTRY_INUSE) && + pd->pd_ctl.bf.pe_done && + !pd->pd_ctl.bf.host_ready) { + pd->pd_ctl.bf.pe_done = 0; + crypto4xx_pd_done(core_dev->dev, tail); + crypto4xx_put_pd_to_pdr(core_dev->dev, tail); + pd_uinfo->state = PD_ENTRY_FREE; + } else { + /* if tail not done, break */ + break; + } + } +} + +/** + * Top Half of isr. + */ +static irqreturn_t crypto4xx_ce_interrupt_handler(int irq, void *data) +{ + struct device *dev = (struct device *)data; + struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev); + + if (core_dev->dev->ce_base == 0) + return 0; + + writel(PPC4XX_INTERRUPT_CLR, + core_dev->dev->ce_base + CRYPTO4XX_INT_CLR); + tasklet_schedule(&core_dev->tasklet); + + return IRQ_HANDLED; +} + +/** + * Supported Crypto Algorithms + */ +struct crypto_alg crypto4xx_alg[] = { + /* Crypto AES modes */ + { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-ppc4xx", + .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto4xx_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_IV_SIZE, + .setkey = crypto4xx_setkey_aes_cbc, + .encrypt = crypto4xx_encrypt, + .decrypt = crypto4xx_decrypt, + } + } + }, + /* Hash SHA1 */ + { + .cra_name = "sha1", + .cra_driver_name = "sha1-ppc4xx", + .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto4xx_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ahash_type, + .cra_init = crypto4xx_sha1_alg_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ahash = { + .digestsize = SHA1_DIGEST_SIZE, + .init = crypto4xx_hash_init, + .update = crypto4xx_hash_update, + .final = crypto4xx_hash_final, + .digest = crypto4xx_hash_digest, + } + } + }, +}; + +/** + * Module Initialization Routine + */ +static int __init crypto4xx_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int rc; + struct resource res; + struct device *dev = &ofdev->dev; + struct crypto4xx_core_device *core_dev; + + rc = of_address_to_resource(ofdev->node, 0, &res); + if (rc) + return -ENODEV; + + if (of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-crypto")) { + mtdcri(SDR0, PPC460EX_SDR0_SRST, + mfdcri(SDR0, PPC460EX_SDR0_SRST) | PPC460EX_CE_RESET); + mtdcri(SDR0, PPC460EX_SDR0_SRST, + mfdcri(SDR0, PPC460EX_SDR0_SRST) & ~PPC460EX_CE_RESET); + } else if (of_find_compatible_node(NULL, NULL, + "amcc,ppc405ex-crypto")) { + mtdcri(SDR0, PPC405EX_SDR0_SRST, + mfdcri(SDR0, PPC405EX_SDR0_SRST) | PPC405EX_CE_RESET); + mtdcri(SDR0, PPC405EX_SDR0_SRST, + mfdcri(SDR0, PPC405EX_SDR0_SRST) & ~PPC405EX_CE_RESET); + } else if (of_find_compatible_node(NULL, NULL, + "amcc,ppc460sx-crypto")) { + mtdcri(SDR0, PPC460SX_SDR0_SRST, + mfdcri(SDR0, PPC460SX_SDR0_SRST) | PPC460SX_CE_RESET); + mtdcri(SDR0, PPC460SX_SDR0_SRST, + mfdcri(SDR0, PPC460SX_SDR0_SRST) & ~PPC460SX_CE_RESET); + } else { + printk(KERN_ERR "Crypto Function Not supported!\n"); + return -EINVAL; + } + + core_dev = kzalloc(sizeof(struct crypto4xx_core_device), GFP_KERNEL); + if (!core_dev) + return -ENOMEM; + + dev_set_drvdata(dev, core_dev); + core_dev->ofdev = ofdev; + core_dev->dev = kzalloc(sizeof(struct crypto4xx_device), GFP_KERNEL); + if (!core_dev->dev) + goto err_alloc_dev; + + core_dev->dev->core_dev = core_dev; + core_dev->device = dev; + spin_lock_init(&core_dev->lock); + INIT_LIST_HEAD(&core_dev->dev->alg_list); + rc = crypto4xx_build_pdr(core_dev->dev); + if (rc) + goto err_build_pdr; + + rc = crypto4xx_build_gdr(core_dev->dev); + if (rc) + goto err_build_gdr; + + rc = crypto4xx_build_sdr(core_dev->dev); + if (rc) + goto err_build_sdr; + + /* Init tasklet for bottom half processing */ + tasklet_init(&core_dev->tasklet, crypto4xx_bh_tasklet_cb, + (unsigned long) dev); + + /* Register for Crypto isr, Crypto Engine IRQ */ + core_dev->irq = irq_of_parse_and_map(ofdev->node, 0); + rc = request_irq(core_dev->irq, crypto4xx_ce_interrupt_handler, 0, + core_dev->dev->name, dev); + if (rc) + goto err_request_irq; + + core_dev->dev->ce_base = of_iomap(ofdev->node, 0); + if (!core_dev->dev->ce_base) { + dev_err(dev, "failed to of_iomap\n"); + goto err_iomap; + } + + /* need to setup pdr, rdr, gdr and sdr before this */ + crypto4xx_hw_init(core_dev->dev); + + /* Register security algorithms with Linux CryptoAPI */ + rc = crypto4xx_register_alg(core_dev->dev, crypto4xx_alg, + ARRAY_SIZE(crypto4xx_alg)); + if (rc) + goto err_start_dev; + + return 0; + +err_start_dev: + iounmap(core_dev->dev->ce_base); +err_iomap: + free_irq(core_dev->irq, dev); + irq_dispose_mapping(core_dev->irq); + tasklet_kill(&core_dev->tasklet); +err_request_irq: + crypto4xx_destroy_sdr(core_dev->dev); +err_build_sdr: + crypto4xx_destroy_gdr(core_dev->dev); +err_build_gdr: + crypto4xx_destroy_pdr(core_dev->dev); +err_build_pdr: + kfree(core_dev->dev); +err_alloc_dev: + kfree(core_dev); + + return rc; +} + +static int __exit crypto4xx_remove(struct of_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev); + + free_irq(core_dev->irq, dev); + irq_dispose_mapping(core_dev->irq); + + tasklet_kill(&core_dev->tasklet); + /* Un-register with Linux CryptoAPI */ + crypto4xx_unregister_alg(core_dev->dev); + /* Free all allocated memory */ + crypto4xx_stop_all(core_dev); + + return 0; +} + +static struct of_device_id crypto4xx_match[] = { + { .compatible = "amcc,ppc4xx-crypto",}, + { }, +}; + +static struct of_platform_driver crypto4xx_driver = { + .name = "crypto4xx", + .match_table = crypto4xx_match, + .probe = crypto4xx_probe, + .remove = crypto4xx_remove, +}; + +static int __init crypto4xx_init(void) +{ + return of_register_platform_driver(&crypto4xx_driver); +} + +static void __exit crypto4xx_exit(void) +{ + of_unregister_platform_driver(&crypto4xx_driver); +} + +module_init(crypto4xx_init); +module_exit(crypto4xx_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("James Hsiao "); +MODULE_DESCRIPTION("Driver for AMCC PPC4xx crypto accelerator"); + diff --git a/drivers/crypto/amcc/crypto4xx_core.h b/drivers/crypto/amcc/crypto4xx_core.h new file mode 100644 index 000000000000..1ef103449364 --- /dev/null +++ b/drivers/crypto/amcc/crypto4xx_core.h @@ -0,0 +1,177 @@ +/** + * AMCC SoC PPC4xx Crypto Driver + * + * Copyright (c) 2008 Applied Micro Circuits Corporation. + * All rights reserved. James Hsiao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This is the header file for AMCC Crypto offload Linux device driver for + * use with Linux CryptoAPI. + + */ + +#ifndef __CRYPTO4XX_CORE_H__ +#define __CRYPTO4XX_CORE_H__ + +#define PPC460SX_SDR0_SRST 0x201 +#define PPC405EX_SDR0_SRST 0x200 +#define PPC460EX_SDR0_SRST 0x201 +#define PPC460EX_CE_RESET 0x08000000 +#define PPC460SX_CE_RESET 0x20000000 +#define PPC405EX_CE_RESET 0x00000008 + +#define CRYPTO4XX_CRYPTO_PRIORITY 300 +#define PPC4XX_LAST_PD 63 +#define PPC4XX_NUM_PD 64 +#define PPC4XX_LAST_GD 1023 +#define PPC4XX_NUM_GD 1024 +#define PPC4XX_LAST_SD 63 +#define PPC4XX_NUM_SD 64 +#define PPC4XX_SD_BUFFER_SIZE 2048 + +#define PD_ENTRY_INUSE 1 +#define PD_ENTRY_FREE 0 +#define ERING_WAS_FULL 0xffffffff + +struct crypto4xx_device; + +struct pd_uinfo { + struct crypto4xx_device *dev; + u32 state; + u32 using_sd; + u32 first_gd; /* first gather discriptor + used by this packet */ + u32 num_gd; /* number of gather discriptor + used by this packet */ + u32 first_sd; /* first scatter discriptor + used by this packet */ + u32 num_sd; /* number of scatter discriptors + used by this packet */ + void *sa_va; /* shadow sa, when using cp from ctx->sa */ + u32 sa_pa; + void *sr_va; /* state record for shadow sa */ + u32 sr_pa; + struct scatterlist *dest_va; + struct crypto_async_request *async_req; /* base crypto request + for this packet */ +}; + +struct crypto4xx_device { + struct crypto4xx_core_device *core_dev; + char *name; + u64 ce_phy_address; + void __iomem *ce_base; + + void *pdr; /* base address of packet + descriptor ring */ + dma_addr_t pdr_pa; /* physical address used to + program ce pdr_base_register */ + void *gdr; /* gather descriptor ring */ + dma_addr_t gdr_pa; /* physical address used to + program ce gdr_base_register */ + void *sdr; /* scatter descriptor ring */ + dma_addr_t sdr_pa; /* physical address used to + program ce sdr_base_register */ + void *scatter_buffer_va; + dma_addr_t scatter_buffer_pa; + u32 scatter_buffer_size; + + void *shadow_sa_pool; /* pool of memory for sa in pd_uinfo */ + dma_addr_t shadow_sa_pool_pa; + void *shadow_sr_pool; /* pool of memory for sr in pd_uinfo */ + dma_addr_t shadow_sr_pool_pa; + u32 pdr_tail; + u32 pdr_head; + u32 gdr_tail; + u32 gdr_head; + u32 sdr_tail; + u32 sdr_head; + void *pdr_uinfo; + struct list_head alg_list; /* List of algorithm supported + by this device */ +}; + +struct crypto4xx_core_device { + struct device *device; + struct of_device *ofdev; + struct crypto4xx_device *dev; + u32 int_status; + u32 irq; + struct tasklet_struct tasklet; + spinlock_t lock; +}; + +struct crypto4xx_ctx { + struct crypto4xx_device *dev; + void *sa_in; + dma_addr_t sa_in_dma_addr; + void *sa_out; + dma_addr_t sa_out_dma_addr; + void *state_record; + dma_addr_t state_record_dma_addr; + u32 sa_len; + u32 offset_to_sr_ptr; /* offset to state ptr, in dynamic sa */ + u32 direction; + u32 next_hdr; + u32 save_iv; + u32 pd_ctl_len; + u32 pd_ctl; + u32 bypass; + u32 is_hash; + u32 hash_final; +}; + +struct crypto4xx_req_ctx { + struct crypto4xx_device *dev; /* Device in which + operation to send to */ + void *sa; + u32 sa_dma_addr; + u16 sa_len; +}; + +struct crypto4xx_alg { + struct list_head entry; + struct crypto_alg alg; + struct crypto4xx_device *dev; +}; + +#define crypto_alg_to_crypto4xx_alg(x) \ + container_of(x, struct crypto4xx_alg, alg) + +extern int crypto4xx_alloc_sa(struct crypto4xx_ctx *ctx, u32 size); +extern void crypto4xx_free_sa(struct crypto4xx_ctx *ctx); +extern u32 crypto4xx_alloc_sa_rctx(struct crypto4xx_ctx *ctx, + struct crypto4xx_ctx *rctx); +extern void crypto4xx_free_sa_rctx(struct crypto4xx_ctx *rctx); +extern void crypto4xx_free_ctx(struct crypto4xx_ctx *ctx); +extern u32 crypto4xx_alloc_state_record(struct crypto4xx_ctx *ctx); +extern u32 get_dynamic_sa_offset_state_ptr_field(struct crypto4xx_ctx *ctx); +extern u32 get_dynamic_sa_offset_key_field(struct crypto4xx_ctx *ctx); +extern u32 get_dynamic_sa_iv_size(struct crypto4xx_ctx *ctx); +extern void crypto4xx_memcpy_le(unsigned int *dst, + const unsigned char *buf, int len); +extern u32 crypto4xx_build_pd(struct crypto_async_request *req, + struct crypto4xx_ctx *ctx, + struct scatterlist *src, + struct scatterlist *dst, + unsigned int datalen, + void *iv, u32 iv_len); +extern int crypto4xx_setkey_aes_cbc(struct crypto_ablkcipher *cipher, + const u8 *key, unsigned int keylen); +extern int crypto4xx_encrypt(struct ablkcipher_request *req); +extern int crypto4xx_decrypt(struct ablkcipher_request *req); +extern int crypto4xx_sha1_alg_init(struct crypto_tfm *tfm); +extern int crypto4xx_hash_digest(struct ahash_request *req); +extern int crypto4xx_hash_final(struct ahash_request *req); +extern int crypto4xx_hash_update(struct ahash_request *req); +extern int crypto4xx_hash_init(struct ahash_request *req); +#endif diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h new file mode 100644 index 000000000000..7d4edb002619 --- /dev/null +++ b/drivers/crypto/amcc/crypto4xx_reg_def.h @@ -0,0 +1,284 @@ +/** + * AMCC SoC PPC4xx Crypto Driver + * + * Copyright (c) 2008 Applied Micro Circuits Corporation. + * All rights reserved. James Hsiao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This filr defines the register set for Security Subsystem + */ + +#ifndef __CRYPTO4XX_REG_DEF_H__ +#define __CRYPTO4XX_REG_DEF_H__ + +/* CRYPTO4XX Register offset */ +#define CRYPTO4XX_DESCRIPTOR 0x00000000 +#define CRYPTO4XX_CTRL_STAT 0x00000000 +#define CRYPTO4XX_SOURCE 0x00000004 +#define CRYPTO4XX_DEST 0x00000008 +#define CRYPTO4XX_SA 0x0000000C +#define CRYPTO4XX_SA_LENGTH 0x00000010 +#define CRYPTO4XX_LENGTH 0x00000014 + +#define CRYPTO4XX_PE_DMA_CFG 0x00000040 +#define CRYPTO4XX_PE_DMA_STAT 0x00000044 +#define CRYPTO4XX_PDR_BASE 0x00000048 +#define CRYPTO4XX_RDR_BASE 0x0000004c +#define CRYPTO4XX_RING_SIZE 0x00000050 +#define CRYPTO4XX_RING_CTRL 0x00000054 +#define CRYPTO4XX_INT_RING_STAT 0x00000058 +#define CRYPTO4XX_EXT_RING_STAT 0x0000005c +#define CRYPTO4XX_IO_THRESHOLD 0x00000060 +#define CRYPTO4XX_GATH_RING_BASE 0x00000064 +#define CRYPTO4XX_SCAT_RING_BASE 0x00000068 +#define CRYPTO4XX_PART_RING_SIZE 0x0000006c +#define CRYPTO4XX_PART_RING_CFG 0x00000070 + +#define CRYPTO4XX_PDR_BASE_UADDR 0x00000080 +#define CRYPTO4XX_RDR_BASE_UADDR 0x00000084 +#define CRYPTO4XX_PKT_SRC_UADDR 0x00000088 +#define CRYPTO4XX_PKT_DEST_UADDR 0x0000008c +#define CRYPTO4XX_SA_UADDR 0x00000090 +#define CRYPTO4XX_GATH_RING_BASE_UADDR 0x000000A0 +#define CRYPTO4XX_SCAT_RING_BASE_UADDR 0x000000A4 + +#define CRYPTO4XX_SEQ_RD 0x00000408 +#define CRYPTO4XX_SEQ_MASK_RD 0x0000040C + +#define CRYPTO4XX_SA_CMD_0 0x00010600 +#define CRYPTO4XX_SA_CMD_1 0x00010604 + +#define CRYPTO4XX_STATE_PTR 0x000106dc +#define CRYPTO4XX_STATE_IV 0x00010700 +#define CRYPTO4XX_STATE_HASH_BYTE_CNT_0 0x00010710 +#define CRYPTO4XX_STATE_HASH_BYTE_CNT_1 0x00010714 + +#define CRYPTO4XX_STATE_IDIGEST_0 0x00010718 +#define CRYPTO4XX_STATE_IDIGEST_1 0x0001071c + +#define CRYPTO4XX_DATA_IN 0x00018000 +#define CRYPTO4XX_DATA_OUT 0x0001c000 + +#define CRYPTO4XX_INT_UNMASK_STAT 0x000500a0 +#define CRYPTO4XX_INT_MASK_STAT 0x000500a4 +#define CRYPTO4XX_INT_CLR 0x000500a4 +#define CRYPTO4XX_INT_EN 0x000500a8 + +#define CRYPTO4XX_INT_PKA 0x00000002 +#define CRYPTO4XX_INT_PDR_DONE 0x00008000 +#define CRYPTO4XX_INT_MA_WR_ERR 0x00020000 +#define CRYPTO4XX_INT_MA_RD_ERR 0x00010000 +#define CRYPTO4XX_INT_PE_ERR 0x00000200 +#define CRYPTO4XX_INT_USER_DMA_ERR 0x00000040 +#define CRYPTO4XX_INT_SLAVE_ERR 0x00000010 +#define CRYPTO4XX_INT_MASTER_ERR 0x00000008 +#define CRYPTO4XX_INT_ERROR 0x00030258 + +#define CRYPTO4XX_INT_CFG 0x000500ac +#define CRYPTO4XX_INT_DESCR_RD 0x000500b0 +#define CRYPTO4XX_INT_DESCR_CNT 0x000500b4 +#define CRYPTO4XX_INT_TIMEOUT_CNT 0x000500b8 + +#define CRYPTO4XX_DEVICE_CTRL 0x00060080 +#define CRYPTO4XX_DEVICE_ID 0x00060084 +#define CRYPTO4XX_DEVICE_INFO 0x00060088 +#define CRYPTO4XX_DMA_USER_SRC 0x00060094 +#define CRYPTO4XX_DMA_USER_DEST 0x00060098 +#define CRYPTO4XX_DMA_USER_CMD 0x0006009C + +#define CRYPTO4XX_DMA_CFG 0x000600d4 +#define CRYPTO4XX_BYTE_ORDER_CFG 0x000600d8 +#define CRYPTO4XX_ENDIAN_CFG 0x000600d8 + +#define CRYPTO4XX_PRNG_STAT 0x00070000 +#define CRYPTO4XX_PRNG_CTRL 0x00070004 +#define CRYPTO4XX_PRNG_SEED_L 0x00070008 +#define CRYPTO4XX_PRNG_SEED_H 0x0007000c + +#define CRYPTO4XX_PRNG_RES_0 0x00070020 +#define CRYPTO4XX_PRNG_RES_1 0x00070024 +#define CRYPTO4XX_PRNG_RES_2 0x00070028 +#define CRYPTO4XX_PRNG_RES_3 0x0007002C + +#define CRYPTO4XX_PRNG_LFSR_L 0x00070030 +#define CRYPTO4XX_PRNG_LFSR_H 0x00070034 + +/** + * Initilize CRYPTO ENGINE registers, and memory bases. + */ +#define PPC4XX_PDR_POLL 0x3ff +#define PPC4XX_OUTPUT_THRESHOLD 2 +#define PPC4XX_INPUT_THRESHOLD 2 +#define PPC4XX_PD_SIZE 6 +#define PPC4XX_CTX_DONE_INT 0x2000 +#define PPC4XX_PD_DONE_INT 0x8000 +#define PPC4XX_BYTE_ORDER 0x22222 +#define PPC4XX_INTERRUPT_CLR 0x3ffff +#define PPC4XX_PRNG_CTRL_AUTO_EN 0x3 +#define PPC4XX_DC_3DES_EN 1 +#define PPC4XX_INT_DESCR_CNT 4 +#define PPC4XX_INT_TIMEOUT_CNT 0 +#define PPC4XX_INT_CFG 1 +/** + * all follow define are ad hoc + */ +#define PPC4XX_RING_RETRY 100 +#define PPC4XX_RING_POLL 100 +#define PPC4XX_SDR_SIZE PPC4XX_NUM_SD +#define PPC4XX_GDR_SIZE PPC4XX_NUM_GD + +/** + * Generic Security Association (SA) with all possible fields. These will + * never likely used except for reference purpose. These structure format + * can be not changed as the hardware expects them to be layout as defined. + * Field can be removed or reduced but ordering can not be changed. + */ +#define CRYPTO4XX_DMA_CFG_OFFSET 0x40 +union ce_pe_dma_cfg { + struct { + u32 rsv:7; + u32 dir_host:1; + u32 rsv1:2; + u32 bo_td_en:1; + u32 dis_pdr_upd:1; + u32 bo_sgpd_en:1; + u32 bo_data_en:1; + u32 bo_sa_en:1; + u32 bo_pd_en:1; + u32 rsv2:4; + u32 dynamic_sa_en:1; + u32 pdr_mode:2; + u32 pe_mode:1; + u32 rsv3:5; + u32 reset_sg:1; + u32 reset_pdr:1; + u32 reset_pe:1; + } bf; + u32 w; +} __attribute__((packed)); + +#define CRYPTO4XX_PDR_BASE_OFFSET 0x48 +#define CRYPTO4XX_RDR_BASE_OFFSET 0x4c +#define CRYPTO4XX_RING_SIZE_OFFSET 0x50 +union ce_ring_size { + struct { + u32 ring_offset:16; + u32 rsv:6; + u32 ring_size:10; + } bf; + u32 w; +} __attribute__((packed)); + +#define CRYPTO4XX_RING_CONTROL_OFFSET 0x54 +union ce_ring_contol { + struct { + u32 continuous:1; + u32 rsv:5; + u32 ring_retry_divisor:10; + u32 rsv1:4; + u32 ring_poll_divisor:10; + } bf; + u32 w; +} __attribute__((packed)); + +#define CRYPTO4XX_IO_THRESHOLD_OFFSET 0x60 +union ce_io_threshold { + struct { + u32 rsv:6; + u32 output_threshold:10; + u32 rsv1:6; + u32 input_threshold:10; + } bf; + u32 w; +} __attribute__((packed)); + +#define CRYPTO4XX_GATHER_RING_BASE_OFFSET 0x64 +#define CRYPTO4XX_SCATTER_RING_BASE_OFFSET 0x68 + +union ce_part_ring_size { + struct { + u32 sdr_size:16; + u32 gdr_size:16; + } bf; + u32 w; +} __attribute__((packed)); + +#define MAX_BURST_SIZE_32 0 +#define MAX_BURST_SIZE_64 1 +#define MAX_BURST_SIZE_128 2 +#define MAX_BURST_SIZE_256 3 + +/* gather descriptor control length */ +struct gd_ctl_len { + u32 len:16; + u32 rsv:14; + u32 done:1; + u32 ready:1; +} __attribute__((packed)); + +struct ce_gd { + u32 ptr; + struct gd_ctl_len ctl_len; +} __attribute__((packed)); + +struct sd_ctl { + u32 ctl:30; + u32 done:1; + u32 rdy:1; +} __attribute__((packed)); + +struct ce_sd { + u32 ptr; + struct sd_ctl ctl; +} __attribute__((packed)); + +#define PD_PAD_CTL_32 0x10 +#define PD_PAD_CTL_64 0x20 +#define PD_PAD_CTL_128 0x40 +#define PD_PAD_CTL_256 0x80 +union ce_pd_ctl { + struct { + u32 pd_pad_ctl:8; + u32 status:8; + u32 next_hdr:8; + u32 rsv:2; + u32 cached_sa:1; + u32 hash_final:1; + u32 init_arc4:1; + u32 rsv1:1; + u32 pe_done:1; + u32 host_ready:1; + } bf; + u32 w; +} __attribute__((packed)); + +union ce_pd_ctl_len { + struct { + u32 bypass:8; + u32 pe_done:1; + u32 host_ready:1; + u32 rsv:2; + u32 pkt_len:20; + } bf; + u32 w; +} __attribute__((packed)); + +struct ce_pd { + union ce_pd_ctl pd_ctl; + u32 src; + u32 dest; + u32 sa; /* get from ctx->sa_dma_addr */ + u32 sa_len; /* only if dynamic sa is used */ + union ce_pd_ctl_len pd_ctl_len; + +} __attribute__((packed)); +#endif diff --git a/drivers/crypto/amcc/crypto4xx_sa.c b/drivers/crypto/amcc/crypto4xx_sa.c new file mode 100644 index 000000000000..466fd94cd4a3 --- /dev/null +++ b/drivers/crypto/amcc/crypto4xx_sa.c @@ -0,0 +1,108 @@ +/** + * AMCC SoC PPC4xx Crypto Driver + * + * Copyright (c) 2008 Applied Micro Circuits Corporation. + * All rights reserved. James Hsiao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * @file crypto4xx_sa.c + * + * This file implements the security context + * assoicate format. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "crypto4xx_reg_def.h" +#include "crypto4xx_sa.h" +#include "crypto4xx_core.h" + +u32 get_dynamic_sa_offset_iv_field(struct crypto4xx_ctx *ctx) +{ + u32 offset; + union dynamic_sa_contents cts; + + if (ctx->direction == DIR_INBOUND) + cts.w = ((struct dynamic_sa_ctl *)(ctx->sa_in))->sa_contents; + else + cts.w = ((struct dynamic_sa_ctl *)(ctx->sa_out))->sa_contents; + offset = cts.bf.key_size + + cts.bf.inner_size + + cts.bf.outer_size + + cts.bf.spi + + cts.bf.seq_num0 + + cts.bf.seq_num1 + + cts.bf.seq_num_mask0 + + cts.bf.seq_num_mask1 + + cts.bf.seq_num_mask2 + + cts.bf.seq_num_mask3; + + return sizeof(struct dynamic_sa_ctl) + offset * 4; +} + +u32 get_dynamic_sa_offset_state_ptr_field(struct crypto4xx_ctx *ctx) +{ + u32 offset; + union dynamic_sa_contents cts; + + if (ctx->direction == DIR_INBOUND) + cts.w = ((struct dynamic_sa_ctl *) ctx->sa_in)->sa_contents; + else + cts.w = ((struct dynamic_sa_ctl *) ctx->sa_out)->sa_contents; + offset = cts.bf.key_size + + cts.bf.inner_size + + cts.bf.outer_size + + cts.bf.spi + + cts.bf.seq_num0 + + cts.bf.seq_num1 + + cts.bf.seq_num_mask0 + + cts.bf.seq_num_mask1 + + cts.bf.seq_num_mask2 + + cts.bf.seq_num_mask3 + + cts.bf.iv0 + + cts.bf.iv1 + + cts.bf.iv2 + + cts.bf.iv3; + + return sizeof(struct dynamic_sa_ctl) + offset * 4; +} + +u32 get_dynamic_sa_iv_size(struct crypto4xx_ctx *ctx) +{ + union dynamic_sa_contents cts; + + if (ctx->direction == DIR_INBOUND) + cts.w = ((struct dynamic_sa_ctl *) ctx->sa_in)->sa_contents; + else + cts.w = ((struct dynamic_sa_ctl *) ctx->sa_out)->sa_contents; + return (cts.bf.iv0 + cts.bf.iv1 + cts.bf.iv2 + cts.bf.iv3) * 4; +} + +u32 get_dynamic_sa_offset_key_field(struct crypto4xx_ctx *ctx) +{ + union dynamic_sa_contents cts; + + if (ctx->direction == DIR_INBOUND) + cts.w = ((struct dynamic_sa_ctl *) ctx->sa_in)->sa_contents; + else + cts.w = ((struct dynamic_sa_ctl *) ctx->sa_out)->sa_contents; + + return sizeof(struct dynamic_sa_ctl); +} diff --git a/drivers/crypto/amcc/crypto4xx_sa.h b/drivers/crypto/amcc/crypto4xx_sa.h new file mode 100644 index 000000000000..4b83ed7e5570 --- /dev/null +++ b/drivers/crypto/amcc/crypto4xx_sa.h @@ -0,0 +1,243 @@ +/** + * AMCC SoC PPC4xx Crypto Driver + * + * Copyright (c) 2008 Applied Micro Circuits Corporation. + * All rights reserved. James Hsiao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This file defines the security context + * assoicate format. + */ + +#ifndef __CRYPTO4XX_SA_H__ +#define __CRYPTO4XX_SA_H__ + +#define AES_IV_SIZE 16 + +/** + * Contents of Dynamic Security Association (SA) with all possible fields + */ +union dynamic_sa_contents { + struct { + u32 arc4_state_ptr:1; + u32 arc4_ij_ptr:1; + u32 state_ptr:1; + u32 iv3:1; + u32 iv2:1; + u32 iv1:1; + u32 iv0:1; + u32 seq_num_mask3:1; + u32 seq_num_mask2:1; + u32 seq_num_mask1:1; + u32 seq_num_mask0:1; + u32 seq_num1:1; + u32 seq_num0:1; + u32 spi:1; + u32 outer_size:5; + u32 inner_size:5; + u32 key_size:4; + u32 cmd_size:4; + } bf; + u32 w; +} __attribute__((packed)); + +#define DIR_OUTBOUND 0 +#define DIR_INBOUND 1 +#define SA_OP_GROUP_BASIC 0 +#define SA_OPCODE_ENCRYPT 0 +#define SA_OPCODE_DECRYPT 0 +#define SA_OPCODE_HASH 3 +#define SA_CIPHER_ALG_DES 0 +#define SA_CIPHER_ALG_3DES 1 +#define SA_CIPHER_ALG_ARC4 2 +#define SA_CIPHER_ALG_AES 3 +#define SA_CIPHER_ALG_KASUMI 4 +#define SA_CIPHER_ALG_NULL 15 + +#define SA_HASH_ALG_MD5 0 +#define SA_HASH_ALG_SHA1 1 +#define SA_HASH_ALG_NULL 15 +#define SA_HASH_ALG_SHA1_DIGEST_SIZE 20 + +#define SA_LOAD_HASH_FROM_SA 0 +#define SA_LOAD_HASH_FROM_STATE 2 +#define SA_NOT_LOAD_HASH 3 +#define SA_LOAD_IV_FROM_SA 0 +#define SA_LOAD_IV_FROM_INPUT 1 +#define SA_LOAD_IV_FROM_STATE 2 +#define SA_LOAD_IV_GEN_IV 3 + +#define SA_PAD_TYPE_CONSTANT 2 +#define SA_PAD_TYPE_ZERO 3 +#define SA_PAD_TYPE_TLS 5 +#define SA_PAD_TYPE_DTLS 5 +#define SA_NOT_SAVE_HASH 0 +#define SA_SAVE_HASH 1 +#define SA_NOT_SAVE_IV 0 +#define SA_SAVE_IV 1 +#define SA_HEADER_PROC 1 +#define SA_NO_HEADER_PROC 0 + +union sa_command_0 { + struct { + u32 scatter:1; + u32 gather:1; + u32 save_hash_state:1; + u32 save_iv:1; + u32 load_hash_state:2; + u32 load_iv:2; + u32 digest_len:4; + u32 hdr_proc:1; + u32 extend_pad:1; + u32 stream_cipher_pad:1; + u32 rsv:1; + u32 hash_alg:4; + u32 cipher_alg:4; + u32 pad_type:2; + u32 op_group:2; + u32 dir:1; + u32 opcode:3; + } bf; + u32 w; +} __attribute__((packed)); + +#define CRYPTO_MODE_ECB 0 +#define CRYPTO_MODE_CBC 1 + +#define CRYPTO_FEEDBACK_MODE_NO_FB 0 +#define CRYPTO_FEEDBACK_MODE_64BIT_OFB 0 +#define CRYPTO_FEEDBACK_MODE_8BIT_CFB 1 +#define CRYPTO_FEEDBACK_MODE_1BIT_CFB 2 +#define CRYPTO_FEEDBACK_MODE_128BIT_CFB 3 + +#define SA_AES_KEY_LEN_128 2 +#define SA_AES_KEY_LEN_192 3 +#define SA_AES_KEY_LEN_256 4 + +#define SA_REV2 1 +/** + * The follow defines bits sa_command_1 + * In Basic hash mode this bit define simple hash or hmac. + * In IPsec mode, this bit define muting control. + */ +#define SA_HASH_MODE_HASH 0 +#define SA_HASH_MODE_HMAC 1 +#define SA_MC_ENABLE 0 +#define SA_MC_DISABLE 1 +#define SA_NOT_COPY_HDR 0 +#define SA_COPY_HDR 1 +#define SA_NOT_COPY_PAD 0 +#define SA_COPY_PAD 1 +#define SA_NOT_COPY_PAYLOAD 0 +#define SA_COPY_PAYLOAD 1 +#define SA_EXTENDED_SN_OFF 0 +#define SA_EXTENDED_SN_ON 1 +#define SA_SEQ_MASK_OFF 0 +#define SA_SEQ_MASK_ON 1 + +union sa_command_1 { + struct { + u32 crypto_mode31:1; + u32 save_arc4_state:1; + u32 arc4_stateful:1; + u32 key_len:5; + u32 hash_crypto_offset:8; + u32 sa_rev:2; + u32 byte_offset:1; + u32 hmac_muting:1; + u32 feedback_mode:2; + u32 crypto_mode9_8:2; + u32 extended_seq_num:1; + u32 seq_num_mask:1; + u32 mutable_bit_proc:1; + u32 ip_version:1; + u32 copy_pad:1; + u32 copy_payload:1; + u32 copy_hdr:1; + u32 rsv1:1; + } bf; + u32 w; +} __attribute__((packed)); + +struct dynamic_sa_ctl { + u32 sa_contents; + union sa_command_0 sa_command_0; + union sa_command_1 sa_command_1; +} __attribute__((packed)); + +/** + * State Record for Security Association (SA) + */ +struct sa_state_record { + u32 save_iv[4]; + u32 save_hash_byte_cnt[2]; + u32 save_digest[16]; +} __attribute__((packed)); + +/** + * Security Association (SA) for AES128 + * + */ +struct dynamic_sa_aes128 { + struct dynamic_sa_ctl ctrl; + u32 key[4]; + u32 iv[4]; /* for CBC, OFC, and CFB mode */ + u32 state_ptr; + u32 reserved; +} __attribute__((packed)); + +#define SA_AES128_LEN (sizeof(struct dynamic_sa_aes128)/4) +#define SA_AES128_CONTENTS 0x3e000042 + +/* + * Security Association (SA) for AES192 + */ +struct dynamic_sa_aes192 { + struct dynamic_sa_ctl ctrl; + u32 key[6]; + u32 iv[4]; /* for CBC, OFC, and CFB mode */ + u32 state_ptr; + u32 reserved; +} __attribute__((packed)); + +#define SA_AES192_LEN (sizeof(struct dynamic_sa_aes192)/4) +#define SA_AES192_CONTENTS 0x3e000062 + +/** + * Security Association (SA) for AES256 + */ +struct dynamic_sa_aes256 { + struct dynamic_sa_ctl ctrl; + u32 key[8]; + u32 iv[4]; /* for CBC, OFC, and CFB mode */ + u32 state_ptr; + u32 reserved; +} __attribute__((packed)); + +#define SA_AES256_LEN (sizeof(struct dynamic_sa_aes256)/4) +#define SA_AES256_CONTENTS 0x3e000082 +#define SA_AES_CONTENTS 0x3e000002 + +/** + * Security Association (SA) for HASH160: HMAC-SHA1 + */ +struct dynamic_sa_hash160 { + struct dynamic_sa_ctl ctrl; + u32 inner_digest[5]; + u32 outer_digest[5]; + u32 state_ptr; + u32 reserved; +} __attribute__((packed)); +#define SA_HASH160_LEN (sizeof(struct dynamic_sa_hash160)/4) +#define SA_HASH160_CONTENTS 0x2000a502 + +#endif -- cgit v1.2.3 From ff753308d2f70f210ba468492cd9a01274d9d7ce Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 17 Feb 2009 20:18:34 +0800 Subject: crypto: api - crypto_alg_mod_lookup either tested or untested As it stands crypto_alg_mod_lookup will search either tested or untested algorithms, but never both at the same time. However, we need exactly that when constructing givcipher and aead so this patch adds support for that by setting the tested bit in type but clearing it in mask. This combination is currently unused. Signed-off-by: Herbert Xu --- crypto/api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/api.c b/crypto/api.c index efe77df6863f..56b6e0e66311 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -244,7 +244,7 @@ struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask) struct crypto_alg *larval; int ok; - if (!(mask & CRYPTO_ALG_TESTED)) { + if (!((type | mask) & CRYPTO_ALG_TESTED)) { type |= CRYPTO_ALG_TESTED; mask |= CRYPTO_ALG_TESTED; } -- cgit v1.2.3 From 3f683d6175748ef9daf4698d9ef5a488dd037063 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 18 Feb 2009 16:56:59 +0800 Subject: crypto: api - Fix crypto_alloc_tfm/create_create_tfm return convention This is based on a report and patch by Geert Uytterhoeven. The functions crypto_alloc_tfm and create_create_tfm return a pointer that needs to be adjusted by the caller when successful and otherwise an error value. This means that the caller has to check for the error and only perform the adjustment if the pointer returned is valid. Since all callers want to make the adjustment and we know how to adjust it ourselves, it's much easier to just return adjusted pointer directly. The only caveat is that we have to return a void * instead of struct crypto_tfm *. However, this isn't that bad because both of these functions are for internal use only (by types code like shash.c, not even algorithms code). This patch also moves crypto_alloc_tfm into crypto/internal.h (crypto_create_tfm is already there) to reflect this. Signed-off-by: Herbert Xu --- crypto/api.c | 15 +++++++-------- crypto/internal.h | 6 ++++-- crypto/shash.c | 18 +++++------------- include/linux/crypto.h | 3 --- 4 files changed, 16 insertions(+), 26 deletions(-) diff --git a/crypto/api.c b/crypto/api.c index 56b6e0e66311..22385cac90bb 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -453,8 +453,8 @@ err: } EXPORT_SYMBOL_GPL(crypto_alloc_base); -struct crypto_tfm *crypto_create_tfm(struct crypto_alg *alg, - const struct crypto_type *frontend) +void *crypto_create_tfm(struct crypto_alg *alg, + const struct crypto_type *frontend) { char *mem; struct crypto_tfm *tfm = NULL; @@ -488,9 +488,9 @@ out_free_tfm: crypto_shoot_alg(alg); kfree(mem); out_err: - tfm = ERR_PTR(err); + mem = ERR_PTR(err); out: - return tfm; + return mem; } EXPORT_SYMBOL_GPL(crypto_create_tfm); @@ -514,12 +514,11 @@ EXPORT_SYMBOL_GPL(crypto_create_tfm); * * In case of error the return value is an error pointer. */ -struct crypto_tfm *crypto_alloc_tfm(const char *alg_name, - const struct crypto_type *frontend, - u32 type, u32 mask) +void *crypto_alloc_tfm(const char *alg_name, + const struct crypto_type *frontend, u32 type, u32 mask) { struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask); - struct crypto_tfm *tfm; + void *tfm; int err; type &= frontend->maskclear; diff --git a/crypto/internal.h b/crypto/internal.h index 3c19a27a7563..fc76e1f37fc3 100644 --- a/crypto/internal.h +++ b/crypto/internal.h @@ -109,8 +109,10 @@ void crypto_alg_tested(const char *name, int err); void crypto_shoot_alg(struct crypto_alg *alg); struct crypto_tfm *__crypto_alloc_tfm(struct crypto_alg *alg, u32 type, u32 mask); -struct crypto_tfm *crypto_create_tfm(struct crypto_alg *alg, - const struct crypto_type *frontend); +void *crypto_create_tfm(struct crypto_alg *alg, + const struct crypto_type *frontend); +void *crypto_alloc_tfm(const char *alg_name, + const struct crypto_type *frontend, u32 type, u32 mask); int crypto_register_instance(struct crypto_template *tmpl, struct crypto_instance *inst); diff --git a/crypto/shash.c b/crypto/shash.c index 13a0dc150a4d..7a659733f94a 100644 --- a/crypto/shash.c +++ b/crypto/shash.c @@ -18,15 +18,10 @@ #include #include -static const struct crypto_type crypto_shash_type; - -static inline struct crypto_shash *__crypto_shash_cast(struct crypto_tfm *tfm) -{ - return container_of(tfm, struct crypto_shash, base); -} - #include "internal.h" +static const struct crypto_type crypto_shash_type; + static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key, unsigned int keylen) { @@ -282,8 +277,7 @@ static int crypto_init_shash_ops_async(struct crypto_tfm *tfm) if (!crypto_mod_get(calg)) return -EAGAIN; - shash = __crypto_shash_cast(crypto_create_tfm( - calg, &crypto_shash_type)); + shash = crypto_create_tfm(calg, &crypto_shash_type); if (IS_ERR(shash)) { crypto_mod_put(calg); return PTR_ERR(shash); @@ -391,8 +385,7 @@ static int crypto_init_shash_ops_compat(struct crypto_tfm *tfm) if (!crypto_mod_get(calg)) return -EAGAIN; - shash = __crypto_shash_cast(crypto_create_tfm( - calg, &crypto_shash_type)); + shash = crypto_create_tfm(calg, &crypto_shash_type); if (IS_ERR(shash)) { crypto_mod_put(calg); return PTR_ERR(shash); @@ -480,8 +473,7 @@ static const struct crypto_type crypto_shash_type = { struct crypto_shash *crypto_alloc_shash(const char *alg_name, u32 type, u32 mask) { - return __crypto_shash_cast( - crypto_alloc_tfm(alg_name, &crypto_shash_type, type, mask)); + return crypto_alloc_tfm(alg_name, &crypto_shash_type, type, mask); } EXPORT_SYMBOL_GPL(crypto_alloc_shash); diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 1f2e9020acc6..29729b834380 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -548,9 +548,6 @@ struct crypto_attr_u32 { * Transform user interface. */ -struct crypto_tfm *crypto_alloc_tfm(const char *alg_name, - const struct crypto_type *frontend, - u32 type, u32 mask); struct crypto_tfm *crypto_alloc_base(const char *alg_name, u32 type, u32 mask); void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm); -- cgit v1.2.3 From c16159123d5b3245e2b30023a207606c74032f9c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 18 Feb 2009 10:15:00 +0100 Subject: sound: OSS: missing parentheses in pas2_card.c Add missing parentheses in pas2_card.c. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/oss/pas2_card.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c index 25f3a22c52ee..7f377ec3486d 100644 --- a/sound/oss/pas2_card.c +++ b/sound/oss/pas2_card.c @@ -156,9 +156,7 @@ static int __init config_pas_hw(struct address_info *hw_config) * 0x80 */ , 0xB88); - pas_write(0x80 - | joystick?0x40:0 - ,0xF388); + pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388); if (pas_irq < 0 || pas_irq > 15) { -- cgit v1.2.3 From d6943541158985030108e4a0a483cdadc3c80ee1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 13:38:11 +0000 Subject: ASoC: Improve diagnostics for AT91SAM9G20-EK probe We should display an error by default if we fail to register. Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index 6ea04be911d0..be3f923d3c43 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -273,6 +273,7 @@ static int __init at91sam9g20ek_init(void) */ ssc = ssc_request(0); if (IS_ERR(ssc)) { + printk(KERN_ERR "ASoC: Failed to request SSC 0\n"); ret = PTR_ERR(ssc); ssc = NULL; goto err_ssc; @@ -281,8 +282,7 @@ static int __init at91sam9g20ek_init(void) at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); if (!at91sam9g20ek_snd_device) { - printk(KERN_DEBUG - "platform device allocation failed\n"); + printk(KERN_ERR "ASoC: Platform device allocation failed\n"); ret = -ENOMEM; } @@ -292,8 +292,7 @@ static int __init at91sam9g20ek_init(void) ret = platform_device_add(at91sam9g20ek_snd_device); if (ret) { - printk(KERN_DEBUG - "platform device allocation failed\n"); + printk(KERN_ERR "ASoC: Platform device allocation failed\n"); platform_device_put(at91sam9g20ek_snd_device); } -- cgit v1.2.3 From 40135ea07190316a789b2edfbf7c8131598bdf81 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 16:04:05 +0000 Subject: ASoC: Check machine type before loading on AT91SAM9G20-EK Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index be3f923d3c43..b7efdc8119d4 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -45,6 +45,7 @@ #include #include +#include #include #include @@ -268,6 +269,9 @@ static int __init at91sam9g20ek_init(void) struct ssc_device *ssc = NULL; int ret; + if (!machine_is_at91sam9g20ek()) + return -ENODEV; + /* * Request SSC device */ -- cgit v1.2.3 From 5de7f9b20069257aa5f0bb74723c8603adc5841a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 17:51:54 +0000 Subject: ASoC: Actively manage MCLK for AT91SAM9G20-EK We have software control of the MCLK for the WM8731 so save a bit of power by actively managing it within the machine driver, enabling it only while the codec is active. Once ASoC supports multiple boards and doesn't require the soc-audio device the initial clock setup should be pushed down into the arch/arm code but for now this reduces merge issues. Tested-by: Sedji Gaouaou Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 68 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 65 insertions(+), 3 deletions(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index b7efdc8119d4..ab32514a858d 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -53,6 +53,9 @@ #include "atmel-pcm.h" #include "atmel_ssc_dai.h" +#define MCLK_RATE 12000000 + +static struct clk *mclk; static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) { @@ -60,11 +63,12 @@ static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; int ret; - /* codec system clock is supplied by PCK0, set to 12MHz */ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, - 12000000, SND_SOC_CLOCK_IN); - if (ret < 0) + MCLK_RATE, SND_SOC_CLOCK_IN); + if (ret < 0) { + clk_disable(mclk); return ret; + } return 0; } @@ -190,6 +194,31 @@ static struct snd_soc_ops at91sam9g20ek_ops = { .shutdown = at91sam9g20ek_shutdown, }; +static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card, + enum snd_soc_bias_level level) +{ + static int mclk_on; + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + if (!mclk_on) + ret = clk_enable(mclk); + if (ret == 0) + mclk_on = 1; + break; + + case SND_SOC_BIAS_OFF: + case SND_SOC_BIAS_STANDBY: + if (mclk_on) + clk_disable(mclk); + mclk_on = 0; + break; + } + + return ret; +} static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { SND_SOC_DAPM_MIC("Int Mic", NULL), @@ -248,6 +277,7 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = { .platform = &atmel_soc_platform, .dai_link = &at91sam9g20ek_dai, .num_links = 1, + .set_bias_level = at91sam9g20ek_set_bias_level, }; static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { @@ -267,11 +297,37 @@ static int __init at91sam9g20ek_init(void) { struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; struct ssc_device *ssc = NULL; + struct clk *pllb; int ret; if (!machine_is_at91sam9g20ek()) return -ENODEV; + /* + * Codec MCLK is supplied by PCK0 - set it up. + */ + mclk = clk_get(NULL, "pck0"); + if (IS_ERR(mclk)) { + printk(KERN_ERR "ASoC: Failed to get MCLK\n"); + ret = PTR_ERR(mclk); + goto err; + } + + pllb = clk_get(NULL, "pllb"); + if (IS_ERR(mclk)) { + printk(KERN_ERR "ASoC: Failed to get PLLB\n"); + ret = PTR_ERR(mclk); + goto err_mclk; + } + ret = clk_set_parent(mclk, pllb); + clk_put(pllb); + if (ret != 0) { + printk(KERN_ERR "ASoC: Failed to set MCLK parent\n"); + goto err_mclk; + } + + clk_set_rate(mclk, MCLK_RATE); + /* * Request SSC device */ @@ -303,6 +359,10 @@ static int __init at91sam9g20ek_init(void) return ret; err_ssc: +err_mclk: + clk_put(mclk); + mclk = NULL; +err: return ret; } @@ -320,6 +380,8 @@ static void __exit at91sam9g20ek_exit(void) platform_device_unregister(at91sam9g20ek_snd_device); at91sam9g20ek_snd_device = NULL; + clk_put(mclk); + mclk = NULL; } module_init(at91sam9g20ek_init); -- cgit v1.2.3 From 7ee753804185eb0a46ac964fd6a6564bd67290c9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 18:00:58 +0000 Subject: ASoC: Rename AT91SAMG20-EK for applications This is a bit more idiomatic and makes identifying a configuration based on the board type work better. Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index ab32514a858d..aa524235fd98 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -273,7 +273,7 @@ static struct snd_soc_dai_link at91sam9g20ek_dai = { }; static struct snd_soc_card snd_soc_at91sam9g20ek = { - .name = "WM8731", + .name = "AT91SAMG20-EK", .platform = &atmel_soc_platform, .dai_link = &at91sam9g20ek_dai, .num_links = 1, -- cgit v1.2.3 From a8035c8f04477895207b92915b908344749be336 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 19:35:43 +0000 Subject: ASoC: Shuffle WM8731 SPI and I2C device registration This is a pure code motion patch intended to improve reviewability of a following patch moving WM8731 to use more standard device registration. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 215 ++++++++++++++++++++++++---------------------- 1 file changed, 112 insertions(+), 103 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index c6db67793777..3ff971aeba21 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -36,6 +36,11 @@ struct wm8731_priv { unsigned int sysclk; }; +#ifdef CONFIG_SPI_MASTER +static int wm8731_spi_write(struct spi_device *spi, const char *data, int len); +static struct spi_driver wm8731_spi_driver; +#endif + /* * wm8731 register cache * We can't read the WM8731 register space when we are @@ -544,54 +549,9 @@ pcm_err: static struct snd_soc_device *wm8731_socdev; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - -/* - * WM8731 2 wire address is determined by GPIO5 - * state during powerup. - * low = 0x1a - * high = 0x1b - */ - -static int wm8731_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct snd_soc_device *socdev = wm8731_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; - - i2c_set_clientdata(i2c, codec); - codec->control_data = i2c; - - ret = wm8731_init(socdev); - if (ret < 0) - pr_err("failed to initialise WM8731\n"); - - return ret; -} -static int wm8731_i2c_remove(struct i2c_client *client) -{ - struct snd_soc_codec *codec = i2c_get_clientdata(client); - kfree(codec->reg_cache); - return 0; -} - -static const struct i2c_device_id wm8731_i2c_id[] = { - { "wm8731", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, wm8731_i2c_id); - -static struct i2c_driver wm8731_i2c_driver = { - .driver = { - .name = "WM8731 I2C Codec", - .owner = THIS_MODULE, - }, - .probe = wm8731_i2c_probe, - .remove = wm8731_i2c_remove, - .id_table = wm8731_i2c_id, -}; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static struct i2c_driver wm8731_i2c_driver; static int wm8731_add_i2c_device(struct platform_device *pdev, const struct wm8731_setup_data *setup) @@ -634,62 +594,6 @@ err_driver: } #endif -#if defined(CONFIG_SPI_MASTER) -static int __devinit wm8731_spi_probe(struct spi_device *spi) -{ - struct snd_soc_device *socdev = wm8731_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; - - codec->control_data = spi; - - ret = wm8731_init(socdev); - if (ret < 0) - dev_err(&spi->dev, "failed to initialise WM8731\n"); - - return ret; -} - -static int __devexit wm8731_spi_remove(struct spi_device *spi) -{ - return 0; -} - -static struct spi_driver wm8731_spi_driver = { - .driver = { - .name = "wm8731", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = wm8731_spi_probe, - .remove = __devexit_p(wm8731_spi_remove), -}; - -static int wm8731_spi_write(struct spi_device *spi, const char *data, int len) -{ - struct spi_transfer t; - struct spi_message m; - u8 msg[2]; - - if (len <= 0) - return 0; - - msg[0] = data[0]; - msg[1] = data[1]; - - spi_message_init(&m); - memset(&t, 0, (sizeof t)); - - t.tx_buf = &msg[0]; - t.len = len; - - spi_message_add_tail(&t, &m); - spi_sync(spi, &m); - - return len; -} -#endif /* CONFIG_SPI_MASTER */ - static int wm8731_probe(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); @@ -772,6 +676,111 @@ struct snd_soc_codec_device soc_codec_dev_wm8731 = { }; EXPORT_SYMBOL_GPL(soc_codec_dev_wm8731); +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8731_spi_probe(struct spi_device *spi) +{ + struct snd_soc_device *socdev = wm8731_socdev; + struct snd_soc_codec *codec = socdev->card->codec; + int ret; + + codec->control_data = spi; + + ret = wm8731_init(socdev); + if (ret < 0) + dev_err(&spi->dev, "failed to initialise WM8731\n"); + + return ret; +} + +static int __devexit wm8731_spi_remove(struct spi_device *spi) +{ + return 0; +} + +static struct spi_driver wm8731_spi_driver = { + .driver = { + .name = "wm8731", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8731_spi_probe, + .remove = __devexit_p(wm8731_spi_remove), +}; + +static int wm8731_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} +#endif /* CONFIG_SPI_MASTER */ + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* + * WM8731 2 wire address is determined by GPIO5 + * state during powerup. + * low = 0x1a + * high = 0x1b + */ + +static int wm8731_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct snd_soc_device *socdev = wm8731_socdev; + struct snd_soc_codec *codec = socdev->card->codec; + int ret; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = wm8731_init(socdev); + if (ret < 0) + pr_err("failed to initialise WM8731\n"); + + return ret; +} + +static int wm8731_i2c_remove(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + kfree(codec->reg_cache); + return 0; +} + +static const struct i2c_device_id wm8731_i2c_id[] = { + { "wm8731", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8731_i2c_id); + +static struct i2c_driver wm8731_i2c_driver = { + .driver = { + .name = "WM8731 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8731_i2c_probe, + .remove = wm8731_i2c_remove, + .id_table = wm8731_i2c_id, +}; +#endif + static int __init wm8731_modinit(void) { return snd_soc_register_dai(&wm8731_dai); -- cgit v1.2.3 From 4dd3a29f295799295eac819bbf540690fbe30c16 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 18 Feb 2009 19:09:23 +0900 Subject: sound: fix opensound URL in oss Introduction Signed-off-by: Yoichi Yuasa Signed-off-by: Takashi Iwai --- Documentation/sound/oss/Introduction | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/sound/oss/Introduction b/Documentation/sound/oss/Introduction index f04ba6bb7395..75d967ff9266 100644 --- a/Documentation/sound/oss/Introduction +++ b/Documentation/sound/oss/Introduction @@ -80,7 +80,7 @@ Notes: additional features. 2. The commercial OSS driver may be obtained from the site: - http://www/opensound.com. This may be used for cards that + http://www.opensound.com. This may be used for cards that are unsupported by the kernel driver, or may be used by other operating systems. -- cgit v1.2.3 From 5998102b9095fdb7c67755812038612afea315c5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Feb 2009 20:49:16 +0000 Subject: ASoC: Refactor WM8731 device registration Move the WM8731 driver to use a more standard device registration scheme where the device can be registered independantly of the ASoC probe. As a transition measure push the current manual code for registering the WM8731 into the individual machine driver probes. This allows separate patches to update the relevant architecture files with less risk of merge issues. Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 43 ++++- sound/soc/codecs/wm8731.c | 334 +++++++++++++++++---------------------- sound/soc/codecs/wm8731.h | 6 - sound/soc/pxa/corgi.c | 43 ++++- sound/soc/pxa/poodle.c | 41 ++++- 5 files changed, 256 insertions(+), 211 deletions(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index aa524235fd98..173a239a541c 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -36,6 +36,7 @@ #include #include #include +#include #include @@ -280,15 +281,41 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = { .set_bias_level = at91sam9g20ek_set_bias_level, }; -static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { - .i2c_bus = 0, - .i2c_address = 0x1b, -}; +/* + * FIXME: This is a temporary bodge to avoid cross-tree merge issues. + * New drivers should register the wm8731 I2C device in the machine + * setup code (under arch/arm for ARM systems). + */ +static int wm8731_i2c_register(void) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = 0x1b; + strlcpy(info.type, "wm8731", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(0); + if (!adapter) { + printk(KERN_ERR "can't get i2c adapter 0\n"); + return -ENODEV; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + printk(KERN_ERR "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + return -ENODEV; + } + + return 0; +} static struct snd_soc_device at91sam9g20ek_snd_devdata = { .card = &snd_soc_at91sam9g20ek, .codec_dev = &soc_codec_dev_wm8731, - .codec_data = &at91sam9g20ek_wm8731_setup, }; static struct platform_device *at91sam9g20ek_snd_device; @@ -340,6 +367,10 @@ static int __init at91sam9g20ek_init(void) } ssc_p->ssc = ssc; + ret = wm8731_i2c_register(); + if (ret != 0) + goto err_ssc; + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); if (!at91sam9g20ek_snd_device) { printk(KERN_ERR "ASoC: Platform device allocation failed\n"); @@ -359,6 +390,8 @@ static int __init at91sam9g20ek_init(void) return ret; err_ssc: + ssc_free(ssc); + ssc_p->ssc = NULL; err_mclk: clk_put(mclk); mclk = NULL; diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 3ff971aeba21..a2c478e53d54 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -29,16 +29,18 @@ #include "wm8731.h" +static struct snd_soc_codec *wm8731_codec; struct snd_soc_codec_device soc_codec_dev_wm8731; /* codec private data */ struct wm8731_priv { + struct snd_soc_codec codec; + u16 reg_cache[WM8731_CACHEREGNUM]; unsigned int sysclk; }; #ifdef CONFIG_SPI_MASTER static int wm8731_spi_write(struct spi_device *spi, const char *data, int len); -static struct spi_driver wm8731_spi_driver; #endif /* @@ -485,55 +487,33 @@ static int wm8731_resume(struct platform_device *pdev) return 0; } -/* - * initialise the WM8731 driver - * register the mixer and dsp interfaces with the kernel - */ -static int wm8731_init(struct snd_soc_device *socdev) +static int wm8731_probe(struct platform_device *pdev) { - struct snd_soc_codec *codec = socdev->card->codec; - int reg, ret = 0; + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; - codec->name = "WM8731"; - codec->owner = THIS_MODULE; - codec->read = wm8731_read_reg_cache; - codec->write = wm8731_write; - codec->set_bias_level = wm8731_set_bias_level; - codec->dai = &wm8731_dai; - codec->num_dai = 1; - codec->reg_cache_size = ARRAY_SIZE(wm8731_reg); - codec->reg_cache = kmemdup(wm8731_reg, sizeof(wm8731_reg), GFP_KERNEL); - if (codec->reg_cache == NULL) - return -ENOMEM; + if (wm8731_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } - wm8731_reset(codec); + socdev->card->codec = wm8731_codec; + codec = wm8731_codec; /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { - printk(KERN_ERR "wm8731: failed to create pcms\n"); + dev_err(codec->dev, "failed to create pcms: %d\n", ret); goto pcm_err; } - /* power on device */ - wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - /* set the update bits */ - reg = wm8731_read_reg_cache(codec, WM8731_LOUT1V); - wm8731_write(codec, WM8731_LOUT1V, reg & ~0x0100); - reg = wm8731_read_reg_cache(codec, WM8731_ROUT1V); - wm8731_write(codec, WM8731_ROUT1V, reg & ~0x0100); - reg = wm8731_read_reg_cache(codec, WM8731_LINVOL); - wm8731_write(codec, WM8731_LINVOL, reg & ~0x0100); - reg = wm8731_read_reg_cache(codec, WM8731_RINVOL); - wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100); - snd_soc_add_controls(codec, wm8731_snd_controls, - ARRAY_SIZE(wm8731_snd_controls)); + ARRAY_SIZE(wm8731_snd_controls)); wm8731_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { - printk(KERN_ERR "wm8731: failed to register card\n"); + dev_err(codec->dev, "failed to register card: %d\n", ret); goto card_err; } @@ -543,104 +523,6 @@ card_err: snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); pcm_err: - kfree(codec->reg_cache); - return ret; -} - -static struct snd_soc_device *wm8731_socdev; - - -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -static struct i2c_driver wm8731_i2c_driver; - -static int wm8731_add_i2c_device(struct platform_device *pdev, - const struct wm8731_setup_data *setup) -{ - struct i2c_board_info info; - struct i2c_adapter *adapter; - struct i2c_client *client; - int ret; - - ret = i2c_add_driver(&wm8731_i2c_driver); - if (ret != 0) { - dev_err(&pdev->dev, "can't add i2c driver\n"); - return ret; - } - - memset(&info, 0, sizeof(struct i2c_board_info)); - info.addr = setup->i2c_address; - strlcpy(info.type, "wm8731", I2C_NAME_SIZE); - - adapter = i2c_get_adapter(setup->i2c_bus); - if (!adapter) { - dev_err(&pdev->dev, "can't get i2c adapter %d\n", - setup->i2c_bus); - goto err_driver; - } - - client = i2c_new_device(adapter, &info); - i2c_put_adapter(adapter); - if (!client) { - dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", - (unsigned int)info.addr); - goto err_driver; - } - - return 0; - -err_driver: - i2c_del_driver(&wm8731_i2c_driver); - return -ENODEV; -} -#endif - -static int wm8731_probe(struct platform_device *pdev) -{ - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct wm8731_setup_data *setup; - struct snd_soc_codec *codec; - struct wm8731_priv *wm8731; - int ret = 0; - - setup = socdev->codec_data; - codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (codec == NULL) - return -ENOMEM; - - wm8731 = kzalloc(sizeof(struct wm8731_priv), GFP_KERNEL); - if (wm8731 == NULL) { - kfree(codec); - return -ENOMEM; - } - - codec->private_data = wm8731; - socdev->card->codec = codec; - mutex_init(&codec->mutex); - INIT_LIST_HEAD(&codec->dapm_widgets); - INIT_LIST_HEAD(&codec->dapm_paths); - - wm8731_socdev = socdev; - ret = -ENODEV; - -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - if (setup->i2c_address) { - codec->hw_write = (hw_write_t)i2c_master_send; - ret = wm8731_add_i2c_device(pdev, setup); - } -#endif -#if defined(CONFIG_SPI_MASTER) - if (setup->spi) { - codec->hw_write = (hw_write_t)wm8731_spi_write; - ret = spi_register_driver(&wm8731_spi_driver); - if (ret != 0) - printk(KERN_ERR "can't add spi driver"); - } -#endif - - if (ret != 0) { - kfree(codec->private_data); - kfree(codec); - } return ret; } @@ -648,22 +530,9 @@ static int wm8731_probe(struct platform_device *pdev) static int wm8731_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->card->codec; - - if (codec->control_data) - wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - i2c_unregister_device(codec->control_data); - i2c_del_driver(&wm8731_i2c_driver); -#endif -#if defined(CONFIG_SPI_MASTER) - spi_unregister_driver(&wm8731_spi_driver); -#endif - kfree(codec->private_data); - kfree(codec); return 0; } @@ -676,37 +545,78 @@ struct snd_soc_codec_device soc_codec_dev_wm8731 = { }; EXPORT_SYMBOL_GPL(soc_codec_dev_wm8731); -#if defined(CONFIG_SPI_MASTER) -static int __devinit wm8731_spi_probe(struct spi_device *spi) +static int wm8731_register(struct wm8731_priv *wm8731) { - struct snd_soc_device *socdev = wm8731_socdev; - struct snd_soc_codec *codec = socdev->card->codec; int ret; + struct snd_soc_codec *codec = &wm8731->codec; + u16 reg; - codec->control_data = spi; + if (wm8731_codec) { + dev_err(codec->dev, "Another WM8731 is registered\n"); + return -EINVAL; + } - ret = wm8731_init(socdev); - if (ret < 0) - dev_err(&spi->dev, "failed to initialise WM8731\n"); + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); - return ret; -} + codec->private_data = wm8731; + codec->name = "WM8731"; + codec->owner = THIS_MODULE; + codec->read = wm8731_read_reg_cache; + codec->write = wm8731_write; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8731_set_bias_level; + codec->dai = &wm8731_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8731_CACHEREGNUM; + codec->reg_cache = &wm8731->reg_cache; + + memcpy(codec->reg_cache, wm8731_reg, sizeof(wm8731_reg)); + + wm8731_dai.dev = codec->dev; + + wm8731_reset(codec); + wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Latch the update bits */ + reg = wm8731_read_reg_cache(codec, WM8731_LOUT1V); + wm8731_write(codec, WM8731_LOUT1V, reg & ~0x0100); + reg = wm8731_read_reg_cache(codec, WM8731_ROUT1V); + wm8731_write(codec, WM8731_ROUT1V, reg & ~0x0100); + reg = wm8731_read_reg_cache(codec, WM8731_LINVOL); + wm8731_write(codec, WM8731_LINVOL, reg & ~0x0100); + reg = wm8731_read_reg_cache(codec, WM8731_RINVOL); + wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100); + + wm8731_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8731_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } -static int __devexit wm8731_spi_remove(struct spi_device *spi) -{ return 0; } -static struct spi_driver wm8731_spi_driver = { - .driver = { - .name = "wm8731", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = wm8731_spi_probe, - .remove = __devexit_p(wm8731_spi_remove), -}; +static void wm8731_unregister(struct wm8731_priv *wm8731) +{ + wm8731_set_bias_level(&wm8731->codec, SND_SOC_BIAS_OFF); + snd_soc_unregister_dai(&wm8731_dai); + snd_soc_unregister_codec(&wm8731->codec); + kfree(wm8731); + wm8731_codec = NULL; +} +#if defined(CONFIG_SPI_MASTER) static int wm8731_spi_write(struct spi_device *spi, const char *data, int len) { struct spi_transfer t; @@ -730,37 +640,67 @@ static int wm8731_spi_write(struct spi_device *spi, const char *data, int len) return len; } + +static int __devinit wm8731_spi_probe(struct spi_device *spi) +{ + struct snd_soc_codec *codec; + struct wm8731_priv *wm8731; + + wm8731 = kzalloc(sizeof(struct wm8731_priv), GFP_KERNEL); + if (wm8731 == NULL) + return -ENOMEM; + + codec = &wm8731->codec; + codec->control_data = spi; + codec->hw_write = (hw_write_t)wm8731_spi_write; + codec->dev = &spi->dev; + + return wm8731_register(wm8731); +} + +static int __devexit wm8731_spi_remove(struct spi_device *spi) +{ + /* FIXME: This isn't actually implemented... */ + return 0; +} + +static struct spi_driver wm8731_spi_driver = { + .driver = { + .name = "wm8731", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8731_spi_probe, + .remove = __devexit_p(wm8731_spi_remove), +}; #endif /* CONFIG_SPI_MASTER */ #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -/* - * WM8731 2 wire address is determined by GPIO5 - * state during powerup. - * low = 0x1a - * high = 0x1b - */ - static int wm8731_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { - struct snd_soc_device *socdev = wm8731_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; + struct wm8731_priv *wm8731; + struct snd_soc_codec *codec; - i2c_set_clientdata(i2c, codec); + wm8731 = kzalloc(sizeof(struct wm8731_priv), GFP_KERNEL); + if (wm8731 == NULL) + return -ENOMEM; + + codec = &wm8731->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8731); codec->control_data = i2c; - ret = wm8731_init(socdev); - if (ret < 0) - pr_err("failed to initialise WM8731\n"); + codec->dev = &i2c->dev; - return ret; + return wm8731_register(wm8731); } static int wm8731_i2c_remove(struct i2c_client *client) { - struct snd_soc_codec *codec = i2c_get_clientdata(client); - kfree(codec->reg_cache); + struct wm8731_priv *wm8731 = i2c_get_clientdata(client); + wm8731_unregister(wm8731); return 0; } @@ -783,13 +723,33 @@ static struct i2c_driver wm8731_i2c_driver = { static int __init wm8731_modinit(void) { - return snd_soc_register_dai(&wm8731_dai); + int ret; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8731_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8731 I2C driver: %d\n", + ret); + } +#endif +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8731_spi_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8731 SPI driver: %d\n", + ret); + } +#endif + return 0; } module_init(wm8731_modinit); static void __exit wm8731_exit(void) { - snd_soc_unregister_dai(&wm8731_dai); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8731_i2c_driver); +#endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8731_spi_driver); +#endif } module_exit(wm8731_exit); diff --git a/sound/soc/codecs/wm8731.h b/sound/soc/codecs/wm8731.h index 95190e9c0c14..cd7b806e8ad0 100644 --- a/sound/soc/codecs/wm8731.h +++ b/sound/soc/codecs/wm8731.h @@ -34,12 +34,6 @@ #define WM8731_SYSCLK 0 #define WM8731_DAI 0 -struct wm8731_setup_data { - int spi; - int i2c_bus; - unsigned short i2c_address; -}; - extern struct snd_soc_dai wm8731_dai; extern struct snd_soc_codec_device soc_codec_dev_wm8731; diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 0d41be33d572..eaa66915a324 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -317,19 +317,44 @@ static struct snd_soc_card snd_soc_corgi = { .num_links = 1, }; -/* corgi audio private data */ -static struct wm8731_setup_data corgi_wm8731_setup = { - .i2c_bus = 0, - .i2c_address = 0x1b, -}; - /* corgi audio subsystem */ static struct snd_soc_device corgi_snd_devdata = { .card = &snd_soc_corgi, .codec_dev = &soc_codec_dev_wm8731, - .codec_data = &corgi_wm8731_setup, }; +/* + * FIXME: This is a temporary bodge to avoid cross-tree merge issues. + * New drivers should register the wm8731 I2C device in the machine + * setup code (under arch/arm for ARM systems). + */ +static int wm8731_i2c_register(void) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = 0x1b; + strlcpy(info.type, "wm8731", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(0); + if (!adapter) { + printk(KERN_ERR "can't get i2c adapter 0\n"); + return -ENODEV; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + printk(KERN_ERR "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + return -ENODEV; + } + + return 0; +} + static struct platform_device *corgi_snd_device; static int __init corgi_init(void) @@ -340,6 +365,10 @@ static int __init corgi_init(void) machine_is_husky())) return -ENODEV; + ret = wm8731_i2c_setup(); + if (ret != 0) + return ret; + corgi_snd_device = platform_device_alloc("soc-audio", -1); if (!corgi_snd_device) return -ENOMEM; diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 3a62d4354ef6..fd683a0b742d 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -283,17 +283,42 @@ static struct snd_soc_card snd_soc_poodle = { .num_links = 1, }; -/* poodle audio private data */ -static struct wm8731_setup_data poodle_wm8731_setup = { - .i2c_bus = 0, - .i2c_address = 0x1b, -}; +/* + * FIXME: This is a temporary bodge to avoid cross-tree merge issues. + * New drivers should register the wm8731 I2C device in the machine + * setup code (under arch/arm for ARM systems). + */ +static int wm8731_i2c_register(void) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = 0x1b; + strlcpy(info.type, "wm8731", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(0); + if (!adapter) { + printk(KERN_ERR "can't get i2c adapter 0\n"); + return -ENODEV; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + printk(KERN_ERR "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + return -ENODEV; + } + + return 0; +} /* poodle audio subsystem */ static struct snd_soc_device poodle_snd_devdata = { .card = &snd_soc_poodle, .codec_dev = &soc_codec_dev_wm8731, - .codec_data = &poodle_wm8731_setup, }; static struct platform_device *poodle_snd_device; @@ -305,6 +330,10 @@ static int __init poodle_init(void) if (!machine_is_poodle()) return -ENODEV; + ret = wm8731_i2c_setup(); + if (ret != 0) + return ret; + locomo_gpio_set_dir(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_AMP_ON, 0); /* should we mute HP at startup - burning power ?*/ -- cgit v1.2.3 From 59544d33ff3118f22a484d8be06cdf5cfc2fdca5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Feb 2009 11:36:44 +0000 Subject: ASoC: Remove version display from the WM8753 driver Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index dc6042c6424f..31ff337f8225 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -51,8 +51,6 @@ #include "wm8753.h" -#define WM8753_VERSION "0.16" - static int caps_charge = 2000; module_param(caps_charge, int, 0); MODULE_PARM_DESC(caps_charge, "WM8753 cap charge time (msecs)"); @@ -1778,8 +1776,6 @@ static int wm8753_probe(struct platform_device *pdev) struct wm8753_priv *wm8753; int ret = 0; - pr_info("WM8753 Audio Codec %s", WM8753_VERSION); - setup = socdev->codec_data; codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); if (codec == NULL) -- cgit v1.2.3 From b3bdb30b6d1989129e297641fec791e9e555e4d8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 18 Feb 2009 13:16:26 +0100 Subject: ALSA: hda - Add quirk for Acer X3200 Acer X3200 needs model=auto, otherwise model=acer is pre-selected. Reference: Novell bnc#476268 https://bugzilla.novell.com/show_bug.cgi?id=476268 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 244de597c5be..192c92a5af38 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8545,6 +8545,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G", ALC888_ACER_ASPIRE_4930G), + SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_4930G), -- cgit v1.2.3 From b170a137f467ea951c3f256da1b911545acf3ffd Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 18 Feb 2009 20:33:55 +0800 Subject: crypto: skcipher - Avoid infinite loop when cipher fails selftest When an skcipher constructed through crypto_givcipher_default fails its selftest, we'll loop forever trying to construct new skcipher objects but failing because it already exists. The crux of the issue is that once a givcipher fails the selftest, we'll ignore it on the next run through crypto_skcipher_lookup and attempt to construct a new givcipher. We should instead return an error to the caller if we find a givcipher that has failed the test. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 19 +++++++++++++++++++ crypto/blkcipher.c | 2 +- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index 94140b3756fc..e11ce37c7104 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -282,6 +282,25 @@ static struct crypto_alg *crypto_lookup_skcipher(const char *name, u32 type, alg->cra_ablkcipher.ivsize)) return alg; + crypto_mod_put(alg); + alg = crypto_alg_mod_lookup(name, type | CRYPTO_ALG_TESTED, + mask & ~CRYPTO_ALG_TESTED); + if (IS_ERR(alg)) + return alg; + + if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_GIVCIPHER) { + if ((alg->cra_flags ^ type ^ ~mask) & CRYPTO_ALG_TESTED) { + crypto_mod_put(alg); + alg = ERR_PTR(-ENOENT); + } + return alg; + } + + BUG_ON(!((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize : + alg->cra_ablkcipher.ivsize)); + return ERR_PTR(crypto_givcipher_default(alg, type, mask)); } diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index d70a41c002df..90d26c91f4e9 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -521,7 +521,7 @@ static int crypto_grab_nivcipher(struct crypto_skcipher_spawn *spawn, int err; type = crypto_skcipher_type(type); - mask = crypto_skcipher_mask(mask) | CRYPTO_ALG_GENIV; + mask = crypto_skcipher_mask(mask)| CRYPTO_ALG_GENIV; alg = crypto_alg_mod_lookup(name, type, mask); if (IS_ERR(alg)) -- cgit v1.2.3 From 5852ae42424e3ddba2d3bdf594f72189497f17ee Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 18 Feb 2009 20:41:47 +0800 Subject: crypto: aead - Avoid infinite loop when nivaead fails selftest When an aead constructed through crypto_nivaead_default fails its selftest, we'll loop forever trying to construct new aead objects but failing because it already exists. The crux of the issue is that once an aead fails the selftest, we'll ignore it on the next run through crypto_aead_lookup and attempt to construct a new aead. We should instead return an error to the caller if we find an an that has failed the test. This bug hasn't manifested itself yet because we don't have any test vectors for the existing nivaead algorithms. They're tested through the underlying algorithms only. Signed-off-by: Herbert Xu --- crypto/aead.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/crypto/aead.c b/crypto/aead.c index 3a6f3f52c7c7..d9aa733db164 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -422,6 +422,22 @@ static struct crypto_alg *crypto_lookup_aead(const char *name, u32 type, if (!alg->cra_aead.ivsize) return alg; + crypto_mod_put(alg); + alg = crypto_alg_mod_lookup(name, type | CRYPTO_ALG_TESTED, + mask & ~CRYPTO_ALG_TESTED); + if (IS_ERR(alg)) + return alg; + + if (alg->cra_type == &crypto_aead_type) { + if ((alg->cra_flags ^ type ^ ~mask) & CRYPTO_ALG_TESTED) { + crypto_mod_put(alg); + alg = ERR_PTR(-ENOENT); + } + return alg; + } + + BUG_ON(!alg->cra_aead.ivsize); + return ERR_PTR(crypto_nivaead_default(alg, type, mask)); } -- cgit v1.2.3 From 6fe4a28d8855e072036f36ee22f0a8f43f44918f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 18 Feb 2009 21:41:29 +0800 Subject: crypto: testmgr - Test skciphers with no IVs As it is an skcipher with no IV escapes testing altogether because we only test givcipher objects. This patch fixes the bypass logic to test these algorithms. Conversely, we're currently testing nivaead algorithms with IVs, which would have deadlocked had it not been for the fact that no nivaead algorithms have any test vectors. This patch also fixes that case. Both fixes are ugly as hell, but this ugliness should hopefully disappear once we move them into the per-type code (i.e., the AEAD test would live in aead.c and the skcipher stuff in ablkcipher.c). Signed-off-by: Herbert Xu --- crypto/algboss.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/crypto/algboss.c b/crypto/algboss.c index 4601e4267c88..6906f92aeac0 100644 --- a/crypto/algboss.c +++ b/crypto/algboss.c @@ -10,7 +10,7 @@ * */ -#include +#include #include #include #include @@ -206,8 +206,7 @@ static int cryptomgr_test(void *data) u32 type = param->type; int err = 0; - if (!((type ^ CRYPTO_ALG_TYPE_BLKCIPHER) & - CRYPTO_ALG_TYPE_BLKCIPHER_MASK) && !(type & CRYPTO_ALG_GENIV)) + if (type & CRYPTO_ALG_TESTED) goto skiptest; err = alg_test(param->driver, param->alg, type, CRYPTO_ALG_TESTED); @@ -223,6 +222,7 @@ static int cryptomgr_schedule_test(struct crypto_alg *alg) { struct task_struct *thread; struct crypto_test_param *param; + u32 type; if (!try_module_get(THIS_MODULE)) goto err; @@ -233,7 +233,19 @@ static int cryptomgr_schedule_test(struct crypto_alg *alg) memcpy(param->driver, alg->cra_driver_name, sizeof(param->driver)); memcpy(param->alg, alg->cra_name, sizeof(param->alg)); - param->type = alg->cra_flags; + type = alg->cra_flags; + + /* This piece of crap needs to disappear into per-type test hooks. */ + if ((!((type ^ CRYPTO_ALG_TYPE_BLKCIPHER) & + CRYPTO_ALG_TYPE_BLKCIPHER_MASK) && !(type & CRYPTO_ALG_GENIV) && + ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize : + alg->cra_ablkcipher.ivsize)) || + (!((type ^ CRYPTO_ALG_TYPE_AEAD) & CRYPTO_ALG_TYPE_MASK) && + alg->cra_type == &crypto_nivaead_type && alg->cra_aead.ivsize)) + type |= CRYPTO_ALG_TESTED; + + param->type = type; thread = kthread_run(cryptomgr_test, param, "cryptomgr_test"); if (IS_ERR(thread)) -- cgit v1.2.3 From fc9967576829a01c98e5388410dc12c61006f79f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Feb 2009 12:34:53 +0000 Subject: ASoC: Fix build for corgi and poodle Signed-off-by: Mark Brown --- sound/soc/pxa/corgi.c | 3 ++- sound/soc/pxa/poodle.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index eaa66915a324..146973ae0974 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -365,7 +366,7 @@ static int __init corgi_init(void) machine_is_husky())) return -ENODEV; - ret = wm8731_i2c_setup(); + ret = wm8731_i2c_register(); if (ret != 0) return ret; diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index fd683a0b742d..fb17a0a5a093 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -330,7 +331,7 @@ static int __init poodle_init(void) if (!machine_is_poodle()) return -ENODEV; - ret = wm8731_i2c_setup(); + ret = wm8731_i2c_register(); if (ret != 0) return ret; -- cgit v1.2.3 From 93b760b7072ca6972c15c798e97af3f830d8bbba Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Feb 2009 12:44:40 +0000 Subject: ASoC: Implement SPI device unregistration for WM8731 Completely untested. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index a2c478e53d54..4191bdb803bf 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -655,12 +655,17 @@ static int __devinit wm8731_spi_probe(struct spi_device *spi) codec->hw_write = (hw_write_t)wm8731_spi_write; codec->dev = &spi->dev; + spi->dev.driver_data = wm8731; + return wm8731_register(wm8731); } static int __devexit wm8731_spi_remove(struct spi_device *spi) { - /* FIXME: This isn't actually implemented... */ + struct wm8731_priv *wm8731 = spi->dev.driver_data; + + wm8731_unregister(wm8731); + return 0; } -- cgit v1.2.3 From 6bab83fd886564e96abcff62862732159535f600 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 18 Feb 2009 14:39:05 +0200 Subject: ASoC: TWL4030: Add digital loopback support This patch adds the digital loopback/bypass support for twl4030 codec. The digital loopback will let the digimic0 (routed in the TX1 capture path inside of TWL4030) data to be routed back to the RX2 playback path (I2S stereo). It can also route the analog capture date routed through the TX1 back to RX2. Effectively the digital loopback is routing the audio from the TX1 capture path to the RX2 playback path. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 56 +++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index c26854b398d3..535d8ce2c328 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -504,6 +504,25 @@ static const struct snd_kcontrol_new twl4030_dapm_abypassr2_control = static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control = SOC_DAPM_SINGLE("Switch", TWL4030_REG_ARXL2_APGA_CTL, 2, 1, 0); +/* Digital bypass gain, 0 mutes the bypass */ +static const unsigned int twl4030_dapm_dbypass_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 3, TLV_DB_SCALE_ITEM(-2400, 0, 1), + 4, 7, TLV_DB_SCALE_ITEM(-1800, 600, 0), +}; + +/* Digital bypass left (TX1L -> RX2L) */ +static const struct snd_kcontrol_new twl4030_dapm_dbypassl_control = + SOC_DAPM_SINGLE_TLV("Volume", + TWL4030_REG_ATX2ARXPGA, 3, 7, 0, + twl4030_dapm_dbypass_tlv); + +/* Digital bypass right (TX1R -> RX2R) */ +static const struct snd_kcontrol_new twl4030_dapm_dbypassr_control = + SOC_DAPM_SINGLE_TLV("Volume", + TWL4030_REG_ATX2ARXPGA, 0, 7, 0, + twl4030_dapm_dbypass_tlv); + static int micpath_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -608,12 +627,22 @@ static int bypass_event(struct snd_soc_dapm_widget *w, unsigned char reg; reg = twl4030_read_reg_cache(w->codec, m->reg); - if (reg & (1 << m->shift)) - twl4030->bypass_state |= - (1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); - else - twl4030->bypass_state &= - ~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); + + if (m->reg <= TWL4030_REG_ARXR2_APGA_CTL) { + /* Analog bypass */ + if (reg & (1 << m->shift)) + twl4030->bypass_state |= + (1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); + else + twl4030->bypass_state &= + ~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL)); + } else { + /* Digital bypass */ + if (reg & (0x7 << m->shift)) + twl4030->bypass_state |= (1 << (m->shift ? 5 : 4)); + else + twl4030->bypass_state &= ~(1 << (m->shift ? 5 : 4)); + } if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) { if (twl4030->bypass_state) @@ -934,6 +963,14 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { &twl4030_dapm_abypassl2_control, bypass_event, SND_SOC_DAPM_POST_REG), + /* Digital bypasses */ + SND_SOC_DAPM_SWITCH_E("Left Digital Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_dbypassl_control, bypass_event, + SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_dbypassr_control, bypass_event, + SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("Analog L1 Playback Mixer", TWL4030_REG_AVDAC_CTL, @@ -1118,6 +1155,13 @@ static const struct snd_soc_dapm_route intercon[] = { {"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"}, {"Analog L2 Playback Mixer", NULL, "Left2 Analog Loopback"}, + /* Digital bypass routes */ + {"Right Digital Loopback", "Volume", "TX1 Capture Route"}, + {"Left Digital Loopback", "Volume", "TX1 Capture Route"}, + + {"Analog R2 Playback Mixer", NULL, "Right Digital Loopback"}, + {"Analog L2 Playback Mixer", NULL, "Left Digital Loopback"}, + }; static int twl4030_add_widgets(struct snd_soc_codec *codec) -- cgit v1.2.3 From 519cf2df5fb50c6d24412b2421ce2d1ff0346163 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Feb 2009 21:06:01 +0000 Subject: ASoC: Check for errors when writing WM8731 reset register Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 4191bdb803bf..9c9fc3b5a6c8 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -574,9 +574,14 @@ static int wm8731_register(struct wm8731_priv *wm8731) memcpy(codec->reg_cache, wm8731_reg, sizeof(wm8731_reg)); + ret = wm8731_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + wm8731_dai.dev = codec->dev; - wm8731_reset(codec); wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* Latch the update bits */ -- cgit v1.2.3 From c6f2981170272cce2c192087a16dd74dbde25ed2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 18 Feb 2009 21:25:40 +0000 Subject: ASoC: Add device init/exit annotations to new-style Wolfson CODEC drivers Signed-off-by: Mark Brown --- sound/soc/codecs/wm8350.c | 2 +- sound/soc/codecs/wm8731.c | 8 ++++---- sound/soc/codecs/wm8900.c | 8 ++++---- sound/soc/codecs/wm8903.c | 8 ++++---- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index d3562788d42b..359e5cc86f34 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1574,7 +1574,7 @@ struct snd_soc_codec_device soc_codec_dev_wm8350 = { }; EXPORT_SYMBOL_GPL(soc_codec_dev_wm8350); -static int wm8350_codec_probe(struct platform_device *pdev) +static __devinit int wm8350_codec_probe(struct platform_device *pdev) { struct wm8350 *wm8350 = platform_get_drvdata(pdev); struct wm8350_data *priv; diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 9c9fc3b5a6c8..4cac3195bfa3 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -686,8 +686,8 @@ static struct spi_driver wm8731_spi_driver = { #endif /* CONFIG_SPI_MASTER */ #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -static int wm8731_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static __devinit int wm8731_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct wm8731_priv *wm8731; struct snd_soc_codec *codec; @@ -707,7 +707,7 @@ static int wm8731_i2c_probe(struct i2c_client *i2c, return wm8731_register(wm8731); } -static int wm8731_i2c_remove(struct i2c_client *client) +static __devexit int wm8731_i2c_remove(struct i2c_client *client) { struct wm8731_priv *wm8731 = i2c_get_clientdata(client); wm8731_unregister(wm8731); @@ -726,7 +726,7 @@ static struct i2c_driver wm8731_i2c_driver = { .owner = THIS_MODULE, }, .probe = wm8731_i2c_probe, - .remove = wm8731_i2c_remove, + .remove = __devexit_p(wm8731_i2c_remove), .id_table = wm8731_i2c_id, }; #endif diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index 85c0f1bc6766..da5ca64f89bb 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -1272,8 +1272,8 @@ static int wm8900_resume(struct platform_device *pdev) static struct snd_soc_codec *wm8900_codec; -static int wm8900_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static __devinit int wm8900_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct wm8900_priv *wm8900; struct snd_soc_codec *codec; @@ -1372,7 +1372,7 @@ err: return ret; } -static int wm8900_i2c_remove(struct i2c_client *client) +static __devexit int wm8900_i2c_remove(struct i2c_client *client) { snd_soc_unregister_dai(&wm8900_dai); snd_soc_unregister_codec(wm8900_codec); @@ -1398,7 +1398,7 @@ static struct i2c_driver wm8900_i2c_driver = { .owner = THIS_MODULE, }, .probe = wm8900_i2c_probe, - .remove = wm8900_i2c_remove, + .remove = __devexit_p(wm8900_i2c_remove), .id_table = wm8900_i2c_id, }; diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index d36b2b1edf19..c6fa8a71b4dd 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -1562,8 +1562,8 @@ static int wm8903_resume(struct platform_device *pdev) static struct snd_soc_codec *wm8903_codec; -static int wm8903_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct wm8903_priv *wm8903; struct snd_soc_codec *codec; @@ -1669,7 +1669,7 @@ err: return ret; } -static int wm8903_i2c_remove(struct i2c_client *client) +static __devexit int wm8903_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); @@ -1699,7 +1699,7 @@ static struct i2c_driver wm8903_i2c_driver = { .owner = THIS_MODULE, }, .probe = wm8903_i2c_probe, - .remove = wm8903_i2c_remove, + .remove = __devexit_p(wm8903_i2c_remove), .id_table = wm8903_i2c_id, }; -- cgit v1.2.3 From 251a2a958b0455d11b711aeeb57cabad66259461 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 18 Feb 2009 11:42:33 -0800 Subject: smack: fix lots of kernel-doc notation Fix/add kernel-doc notation and fix typos in security/smack/. Signed-off-by: Randy Dunlap Acked-by: Casey Schaufler Signed-off-by: James Morris --- security/smack/smack_access.c | 4 ++-- security/smack/smack_lsm.c | 52 ++++++++++++++++++++----------------------- security/smack/smackfs.c | 15 +++++++------ 3 files changed, 34 insertions(+), 37 deletions(-) diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c index 2e0b83e77ffe..cfa19ca125e3 100644 --- a/security/smack/smack_access.c +++ b/security/smack/smack_access.c @@ -162,8 +162,8 @@ int smk_access(char *subject_label, char *object_label, int request) /** * smk_curacc - determine if current has a specific access to an object - * @object_label: a pointer to the object's Smack label - * @request: the access requested, in "MAY" format + * @obj_label: a pointer to the object's Smack label + * @mode: the access requested, in "MAY" format * * This function checks the current subject label/object label pair * in the access rule list and returns 0 if the access is permitted, diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 0278bc083044..4f48da5b08cb 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -91,6 +91,7 @@ struct inode_smack *new_inode_smack(char *smack) /** * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH * @ctp: child task pointer + * @mode: ptrace attachment mode * * Returns 0 if access is OK, an error code otherwise * @@ -203,9 +204,8 @@ static void smack_sb_free_security(struct super_block *sb) /** * smack_sb_copy_data - copy mount options data for processing - * @type: file system type * @orig: where to start - * @smackopts + * @smackopts: mount options string * * Returns 0 on success or -ENOMEM on error. * @@ -331,7 +331,7 @@ static int smack_sb_statfs(struct dentry *dentry) /** * smack_sb_mount - Smack check for mounting * @dev_name: unused - * @nd: mount point + * @path: mount point * @type: unused * @flags: unused * @data: unused @@ -370,7 +370,7 @@ static int smack_sb_umount(struct vfsmount *mnt, int flags) /** * smack_inode_alloc_security - allocate an inode blob - * @inode - the inode in need of a blob + * @inode: the inode in need of a blob * * Returns 0 if it gets a blob, -ENOMEM otherwise */ @@ -384,7 +384,7 @@ static int smack_inode_alloc_security(struct inode *inode) /** * smack_inode_free_security - free an inode blob - * @inode - the inode with a blob + * @inode: the inode with a blob * * Clears the blob pointer in inode */ @@ -538,7 +538,6 @@ static int smack_inode_rename(struct inode *old_inode, * smack_inode_permission - Smack version of permission() * @inode: the inode in question * @mask: the access requested - * @nd: unused * * This is the important Smack hook. * @@ -701,8 +700,7 @@ static int smack_inode_removexattr(struct dentry *dentry, const char *name) * @inode: the object * @name: attribute name * @buffer: where to put the result - * @size: size of the buffer - * @err: unused + * @alloc: unused * * Returns the size of the attribute or an error code */ @@ -864,7 +862,7 @@ static int smack_file_ioctl(struct file *file, unsigned int cmd, /** * smack_file_lock - Smack check on file locking * @file: the object - * @cmd unused + * @cmd: unused * * Returns 0 if current has write access, error code otherwise */ @@ -1003,8 +1001,8 @@ static int smack_cred_prepare(struct cred *new, const struct cred *old, return 0; } -/* - * commit new credentials +/** + * smack_cred_commit - commit new credentials * @new: the new credentials * @old: the original credentials */ @@ -1014,8 +1012,8 @@ static void smack_cred_commit(struct cred *new, const struct cred *old) /** * smack_kernel_act_as - Set the subjective context in a set of credentials - * @new points to the set of credentials to be modified. - * @secid specifies the security ID to be set + * @new: points to the set of credentials to be modified. + * @secid: specifies the security ID to be set * * Set the security data for a kernel service. */ @@ -1032,8 +1030,8 @@ static int smack_kernel_act_as(struct cred *new, u32 secid) /** * smack_kernel_create_files_as - Set the file creation label in a set of creds - * @new points to the set of credentials to be modified - * @inode points to the inode to use as a reference + * @new: points to the set of credentials to be modified + * @inode: points to the inode to use as a reference * * Set the file creation context in a set of credentials to the same * as the objective context of the specified inode @@ -1242,7 +1240,7 @@ static int smack_task_wait(struct task_struct *p) /** * smack_task_to_inode - copy task smack into the inode blob * @p: task to copy from - * inode: inode to copy to + * @inode: inode to copy to * * Sets the smack pointer in the inode security blob */ @@ -1260,7 +1258,7 @@ static void smack_task_to_inode(struct task_struct *p, struct inode *inode) * smack_sk_alloc_security - Allocate a socket blob * @sk: the socket * @family: unused - * @priority: memory allocation priority + * @gfp_flags: memory allocation flags * * Assign Smack pointers to current * @@ -2001,7 +1999,7 @@ static int smack_ipc_permission(struct kern_ipc_perm *ipp, short flag) /** * smack_ipc_getsecid - Extract smack security id - * @ipcp: the object permissions + * @ipp: the object permissions * @secid: where result will be saved */ static void smack_ipc_getsecid(struct kern_ipc_perm *ipp, u32 *secid) @@ -2278,7 +2276,7 @@ static int smack_unix_may_send(struct socket *sock, struct socket *other) /** * smack_socket_sendmsg - Smack check based on destination host * @sock: the socket - * @msghdr: the message + * @msg: the message * @size: the size of the message * * Return 0 if the current subject can write to the destination @@ -2319,8 +2317,7 @@ static int smack_socket_sendmsg(struct socket *sock, struct msghdr *msg, /** - * smack_from_secattr - Convert a netlabel attr.mls.lvl/attr.mls.cat - * pair to smack + * smack_from_secattr - Convert a netlabel attr.mls.lvl/attr.mls.cat pair to smack * @sap: netlabel secattr * @sip: where to put the result * @@ -2441,7 +2438,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb) * @sock: the socket * @optval: user's destination * @optlen: size thereof - * @len: max thereoe + * @len: max thereof * * returns zero on success, an error code otherwise */ @@ -2776,7 +2773,7 @@ static void smack_audit_rule_free(void *vrule) #endif /* CONFIG_AUDIT */ -/* +/** * smack_secid_to_secctx - return the smack label for a secid * @secid: incoming integer * @secdata: destination @@ -2793,7 +2790,7 @@ static int smack_secid_to_secctx(u32 secid, char **secdata, u32 *seclen) return 0; } -/* +/** * smack_secctx_to_secid - return the secid for a smack label * @secdata: smack label * @seclen: how long result is @@ -2807,11 +2804,10 @@ static int smack_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid) return 0; } -/* +/** * smack_release_secctx - don't do anything. - * @key_ref: unused - * @context: unused - * @perm: unused + * @secdata: unused + * @seclen: unused * * Exists to make sure nothing gets done, and properly */ diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index 8e42800878f4..fd8d1eb43700 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -245,7 +245,7 @@ out: /** * smk_write_load - write() for /smack/load - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start - must be 0 @@ -402,6 +402,7 @@ static void smk_cipso_doi(void) /** * smk_unlbl_ambient - initialize the unlabeled domain + * @oldambient: previous domain string */ static void smk_unlbl_ambient(char *oldambient) { @@ -513,7 +514,7 @@ static int smk_open_cipso(struct inode *inode, struct file *file) /** * smk_write_cipso - write() for /smack/cipso - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start @@ -703,7 +704,7 @@ static int smk_open_netlbladdr(struct inode *inode, struct file *file) /** * smk_write_netlbladdr - write() for /smack/netlabel - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start @@ -850,7 +851,7 @@ static ssize_t smk_read_doi(struct file *filp, char __user *buf, /** * smk_write_doi - write() for /smack/doi - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start @@ -915,7 +916,7 @@ static ssize_t smk_read_direct(struct file *filp, char __user *buf, /** * smk_write_direct - write() for /smack/direct - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start @@ -990,7 +991,7 @@ static ssize_t smk_read_ambient(struct file *filp, char __user *buf, /** * smk_write_ambient - write() for /smack/ambient - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start @@ -1065,7 +1066,7 @@ static ssize_t smk_read_onlycap(struct file *filp, char __user *buf, /** * smk_write_onlycap - write() for /smack/onlycap - * @filp: file pointer, not actually used + * @file: file pointer, not actually used * @buf: where to get the data from * @count: bytes sent * @ppos: where to start -- cgit v1.2.3 From 25c38d3fb92fc23af7730a1601bc20af8216ae44 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Thu, 19 Feb 2009 14:33:40 +0800 Subject: crypto: api - Use dedicated workqueue for crypto subsystem Use dedicated workqueue for crypto subsystem A dedicated workqueue named kcrypto_wq is created to be used by crypto subsystem. The system shared keventd_wq is not suitable for encryption/decryption, because of potential starvation problem. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- crypto/Kconfig | 3 +++ crypto/Makefile | 2 ++ crypto/crypto_wq.c | 38 ++++++++++++++++++++++++++++++++++++++ include/crypto/crypto_wq.h | 7 +++++++ 4 files changed, 50 insertions(+) create mode 100644 crypto/crypto_wq.c create mode 100644 include/crypto/crypto_wq.h diff --git a/crypto/Kconfig b/crypto/Kconfig index a83ce0462b6b..420b630a17cf 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -106,6 +106,9 @@ config CRYPTO_NULL help These are 'Null' algorithms, used by IPsec, which do nothing. +config CRYPTO_WORKQUEUE + tristate + config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_BLKCIPHER diff --git a/crypto/Makefile b/crypto/Makefile index 46b08bf2035f..e05a844e08d5 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -5,6 +5,8 @@ obj-$(CONFIG_CRYPTO) += crypto.o crypto-objs := api.o cipher.o digest.o compress.o +obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o + obj-$(CONFIG_CRYPTO_FIPS) += fips.o crypto_algapi-$(CONFIG_PROC_FS) += proc.o diff --git a/crypto/crypto_wq.c b/crypto/crypto_wq.c new file mode 100644 index 000000000000..fdcf6248f152 --- /dev/null +++ b/crypto/crypto_wq.c @@ -0,0 +1,38 @@ +/* + * Workqueue for crypto subsystem + * + * Copyright (c) 2009 Intel Corp. + * Author: Huang Ying + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include + +struct workqueue_struct *kcrypto_wq; +EXPORT_SYMBOL_GPL(kcrypto_wq); + +static int __init crypto_wq_init(void) +{ + kcrypto_wq = create_workqueue("crypto"); + if (unlikely(!kcrypto_wq)) + return -ENOMEM; + return 0; +} + +static void __exit crypto_wq_exit(void) +{ + destroy_workqueue(kcrypto_wq); +} + +module_init(crypto_wq_init); +module_exit(crypto_wq_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Workqueue for crypto subsystem"); diff --git a/include/crypto/crypto_wq.h b/include/crypto/crypto_wq.h new file mode 100644 index 000000000000..a7d252daf91b --- /dev/null +++ b/include/crypto/crypto_wq.h @@ -0,0 +1,7 @@ +#ifndef CRYPTO_WQ_H +#define CRYPTO_WQ_H + +#include + +extern struct workqueue_struct *kcrypto_wq; +#endif -- cgit v1.2.3 From 254eff771441f4ee7aa9cf770a6e4820492c9dab Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Thu, 19 Feb 2009 14:42:19 +0800 Subject: crypto: cryptd - Per-CPU thread implementation based on kcrypto_wq Original cryptd thread implementation has scalability issue, this patch solve the issue with a per-CPU thread implementation. struct cryptd_queue is defined to be a per-CPU queue, which holds one struct cryptd_cpu_queue for each CPU. In struct cryptd_cpu_queue, a struct crypto_queue holds all requests for the CPU, a struct work_struct is used to run all requests for the CPU. Testing based on dm-crypt on an Intel Core 2 E6400 (two cores) machine shows 19.2% performance gain. The testing script is as follow: -------------------- script begin --------------------------- #!/bin/sh dmc_create() { # Create a crypt device using dmsetup dmsetup create $2 --table "0 `blockdev --getsize $1` crypt cbc(aes-asm)?cryptd?plain:plain babebabebabebabebabebabebabebabe 0 $1 0" } dmsetup remove crypt0 dmsetup remove crypt1 dd if=/dev/zero of=/dev/ram0 bs=1M count=4 >& /dev/null dd if=/dev/zero of=/dev/ram1 bs=1M count=4 >& /dev/null dmc_create /dev/ram0 crypt0 dmc_create /dev/ram1 crypt1 cat >tr.sh <& /dev/null & dd if=/dev/dm-1 of=/dev/null >& /dev/null & done wait EOF for n in $(seq 10); do /usr/bin/time sh tr.sh done rm tr.sh -------------------- script end --------------------------- The separator of dm-crypt parameter is changed from "-" to "?", because "-" is used in some cipher driver name too, and cryptds need to specify cipher driver name instead of cipher name. The test result on an Intel Core2 E6400 (two cores) is as follow: without patch: -----------------wo begin -------------------------- 0.04user 0.38system 0:00.39elapsed 107%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6566minor)pagefaults 0swaps 0.07user 0.35system 0:00.35elapsed 121%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6567minor)pagefaults 0swaps 0.06user 0.34system 0:00.30elapsed 135%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.37system 0:00.36elapsed 119%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6607minor)pagefaults 0swaps 0.06user 0.36system 0:00.35elapsed 120%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.37system 0:00.31elapsed 136%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6594minor)pagefaults 0swaps 0.04user 0.34system 0:00.30elapsed 126%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6597minor)pagefaults 0swaps 0.06user 0.32system 0:00.31elapsed 125%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6571minor)pagefaults 0swaps 0.06user 0.34system 0:00.31elapsed 134%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6581minor)pagefaults 0swaps 0.05user 0.38system 0:00.31elapsed 138%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6600minor)pagefaults 0swaps -----------------wo end -------------------------- with patch: ------------------w begin -------------------------- 0.02user 0.31system 0:00.24elapsed 141%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6554minor)pagefaults 0swaps 0.05user 0.34system 0:00.31elapsed 127%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6606minor)pagefaults 0swaps 0.07user 0.33system 0:00.26elapsed 155%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6559minor)pagefaults 0swaps 0.07user 0.32system 0:00.26elapsed 151%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.05user 0.34system 0:00.26elapsed 150%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6603minor)pagefaults 0swaps 0.03user 0.36system 0:00.31elapsed 124%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.04user 0.35system 0:00.26elapsed 147%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6586minor)pagefaults 0swaps 0.03user 0.37system 0:00.27elapsed 146%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6562minor)pagefaults 0swaps 0.04user 0.36system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6594minor)pagefaults 0swaps 0.04user 0.35system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+6557minor)pagefaults 0swaps ------------------w end -------------------------- The middle value of elapsed time is: wo cryptwq: 0.31 w cryptwq: 0.26 The performance gain is about (0.31-0.26)/0.26 = 0.192. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 + crypto/cryptd.c | 220 ++++++++++++++++++++++++++------------------------------ 2 files changed, 104 insertions(+), 117 deletions(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 420b630a17cf..24c31efde882 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -114,6 +114,7 @@ config CRYPTO_CRYPTD select CRYPTO_BLKCIPHER select CRYPTO_HASH select CRYPTO_MANAGER + select CRYPTO_WORKQUEUE help This is a generic software asynchronous crypto daemon that converts an arbitrary synchronous software crypto algorithm diff --git a/crypto/cryptd.c b/crypto/cryptd.c index 93b98c525b3a..d14b22658d7a 100644 --- a/crypto/cryptd.c +++ b/crypto/cryptd.c @@ -13,30 +13,30 @@ #include #include #include +#include #include #include #include -#include #include #include -#include #include #include #include -#include -#define CRYPTD_MAX_QLEN 100 +#define CRYPTD_MAX_CPU_QLEN 100 -struct cryptd_state { - spinlock_t lock; - struct mutex mutex; +struct cryptd_cpu_queue { struct crypto_queue queue; - struct task_struct *task; + struct work_struct work; +}; + +struct cryptd_queue { + struct cryptd_cpu_queue *cpu_queue; }; struct cryptd_instance_ctx { struct crypto_spawn spawn; - struct cryptd_state *state; + struct cryptd_queue *queue; }; struct cryptd_blkcipher_ctx { @@ -55,11 +55,85 @@ struct cryptd_hash_request_ctx { crypto_completion_t complete; }; -static inline struct cryptd_state *cryptd_get_state(struct crypto_tfm *tfm) +static void cryptd_queue_worker(struct work_struct *work); + +static int cryptd_init_queue(struct cryptd_queue *queue, + unsigned int max_cpu_qlen) +{ + int cpu; + struct cryptd_cpu_queue *cpu_queue; + + queue->cpu_queue = alloc_percpu(struct cryptd_cpu_queue); + if (!queue->cpu_queue) + return -ENOMEM; + for_each_possible_cpu(cpu) { + cpu_queue = per_cpu_ptr(queue->cpu_queue, cpu); + crypto_init_queue(&cpu_queue->queue, max_cpu_qlen); + INIT_WORK(&cpu_queue->work, cryptd_queue_worker); + } + return 0; +} + +static void cryptd_fini_queue(struct cryptd_queue *queue) +{ + int cpu; + struct cryptd_cpu_queue *cpu_queue; + + for_each_possible_cpu(cpu) { + cpu_queue = per_cpu_ptr(queue->cpu_queue, cpu); + BUG_ON(cpu_queue->queue.qlen); + } + free_percpu(queue->cpu_queue); +} + +static int cryptd_enqueue_request(struct cryptd_queue *queue, + struct crypto_async_request *request) +{ + int cpu, err; + struct cryptd_cpu_queue *cpu_queue; + + cpu = get_cpu(); + cpu_queue = per_cpu_ptr(queue->cpu_queue, cpu); + err = crypto_enqueue_request(&cpu_queue->queue, request); + queue_work_on(cpu, kcrypto_wq, &cpu_queue->work); + put_cpu(); + + return err; +} + +/* Called in workqueue context, do one real cryption work (via + * req->complete) and reschedule itself if there are more work to + * do. */ +static void cryptd_queue_worker(struct work_struct *work) +{ + struct cryptd_cpu_queue *cpu_queue; + struct crypto_async_request *req, *backlog; + + cpu_queue = container_of(work, struct cryptd_cpu_queue, work); + /* Only handle one request at a time to avoid hogging crypto + * workqueue. preempt_disable/enable is used to prevent + * being preempted by cryptd_enqueue_request() */ + preempt_disable(); + backlog = crypto_get_backlog(&cpu_queue->queue); + req = crypto_dequeue_request(&cpu_queue->queue); + preempt_enable(); + + if (!req) + return; + + if (backlog) + backlog->complete(backlog, -EINPROGRESS); + req->complete(req, 0); + + if (cpu_queue->queue.qlen) + queue_work(kcrypto_wq, &cpu_queue->work); +} + +static inline struct cryptd_queue *cryptd_get_queue(struct crypto_tfm *tfm) { struct crypto_instance *inst = crypto_tfm_alg_instance(tfm); struct cryptd_instance_ctx *ictx = crypto_instance_ctx(inst); - return ictx->state; + return ictx->queue; } static int cryptd_blkcipher_setkey(struct crypto_ablkcipher *parent, @@ -131,19 +205,13 @@ static int cryptd_blkcipher_enqueue(struct ablkcipher_request *req, { struct cryptd_blkcipher_request_ctx *rctx = ablkcipher_request_ctx(req); struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct cryptd_state *state = - cryptd_get_state(crypto_ablkcipher_tfm(tfm)); - int err; + struct cryptd_queue *queue; + queue = cryptd_get_queue(crypto_ablkcipher_tfm(tfm)); rctx->complete = req->base.complete; req->base.complete = complete; - spin_lock_bh(&state->lock); - err = ablkcipher_enqueue_request(&state->queue, req); - spin_unlock_bh(&state->lock); - - wake_up_process(state->task); - return err; + return cryptd_enqueue_request(queue, &req->base); } static int cryptd_blkcipher_encrypt_enqueue(struct ablkcipher_request *req) @@ -177,21 +245,12 @@ static int cryptd_blkcipher_init_tfm(struct crypto_tfm *tfm) static void cryptd_blkcipher_exit_tfm(struct crypto_tfm *tfm) { struct cryptd_blkcipher_ctx *ctx = crypto_tfm_ctx(tfm); - struct cryptd_state *state = cryptd_get_state(tfm); - int active; - - mutex_lock(&state->mutex); - active = ablkcipher_tfm_in_queue(&state->queue, - __crypto_ablkcipher_cast(tfm)); - mutex_unlock(&state->mutex); - - BUG_ON(active); crypto_free_blkcipher(ctx->child); } static struct crypto_instance *cryptd_alloc_instance(struct crypto_alg *alg, - struct cryptd_state *state) + struct cryptd_queue *queue) { struct crypto_instance *inst; struct cryptd_instance_ctx *ctx; @@ -214,7 +273,7 @@ static struct crypto_instance *cryptd_alloc_instance(struct crypto_alg *alg, if (err) goto out_free_inst; - ctx->state = state; + ctx->queue = queue; memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME); @@ -232,7 +291,7 @@ out_free_inst: } static struct crypto_instance *cryptd_alloc_blkcipher( - struct rtattr **tb, struct cryptd_state *state) + struct rtattr **tb, struct cryptd_queue *queue) { struct crypto_instance *inst; struct crypto_alg *alg; @@ -242,7 +301,7 @@ static struct crypto_instance *cryptd_alloc_blkcipher( if (IS_ERR(alg)) return ERR_CAST(alg); - inst = cryptd_alloc_instance(alg, state); + inst = cryptd_alloc_instance(alg, queue); if (IS_ERR(inst)) goto out_put_alg; @@ -290,15 +349,6 @@ static int cryptd_hash_init_tfm(struct crypto_tfm *tfm) static void cryptd_hash_exit_tfm(struct crypto_tfm *tfm) { struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm); - struct cryptd_state *state = cryptd_get_state(tfm); - int active; - - mutex_lock(&state->mutex); - active = ahash_tfm_in_queue(&state->queue, - __crypto_ahash_cast(tfm)); - mutex_unlock(&state->mutex); - - BUG_ON(active); crypto_free_hash(ctx->child); } @@ -324,19 +374,13 @@ static int cryptd_hash_enqueue(struct ahash_request *req, { struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req); struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct cryptd_state *state = - cryptd_get_state(crypto_ahash_tfm(tfm)); - int err; + struct cryptd_queue *queue = + cryptd_get_queue(crypto_ahash_tfm(tfm)); rctx->complete = req->base.complete; req->base.complete = complete; - spin_lock_bh(&state->lock); - err = ahash_enqueue_request(&state->queue, req); - spin_unlock_bh(&state->lock); - - wake_up_process(state->task); - return err; + return cryptd_enqueue_request(queue, &req->base); } static void cryptd_hash_init(struct crypto_async_request *req_async, int err) @@ -469,7 +513,7 @@ static int cryptd_hash_digest_enqueue(struct ahash_request *req) } static struct crypto_instance *cryptd_alloc_hash( - struct rtattr **tb, struct cryptd_state *state) + struct rtattr **tb, struct cryptd_queue *queue) { struct crypto_instance *inst; struct crypto_alg *alg; @@ -479,7 +523,7 @@ static struct crypto_instance *cryptd_alloc_hash( if (IS_ERR(alg)) return ERR_PTR(PTR_ERR(alg)); - inst = cryptd_alloc_instance(alg, state); + inst = cryptd_alloc_instance(alg, queue); if (IS_ERR(inst)) goto out_put_alg; @@ -503,7 +547,7 @@ out_put_alg: return inst; } -static struct cryptd_state state; +static struct cryptd_queue queue; static struct crypto_instance *cryptd_alloc(struct rtattr **tb) { @@ -515,9 +559,9 @@ static struct crypto_instance *cryptd_alloc(struct rtattr **tb) switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) { case CRYPTO_ALG_TYPE_BLKCIPHER: - return cryptd_alloc_blkcipher(tb, &state); + return cryptd_alloc_blkcipher(tb, &queue); case CRYPTO_ALG_TYPE_DIGEST: - return cryptd_alloc_hash(tb, &state); + return cryptd_alloc_hash(tb, &queue); } return ERR_PTR(-EINVAL); @@ -572,82 +616,24 @@ void cryptd_free_ablkcipher(struct cryptd_ablkcipher *tfm) } EXPORT_SYMBOL_GPL(cryptd_free_ablkcipher); -static inline int cryptd_create_thread(struct cryptd_state *state, - int (*fn)(void *data), const char *name) -{ - spin_lock_init(&state->lock); - mutex_init(&state->mutex); - crypto_init_queue(&state->queue, CRYPTD_MAX_QLEN); - - state->task = kthread_run(fn, state, name); - if (IS_ERR(state->task)) - return PTR_ERR(state->task); - - return 0; -} - -static inline void cryptd_stop_thread(struct cryptd_state *state) -{ - BUG_ON(state->queue.qlen); - kthread_stop(state->task); -} - -static int cryptd_thread(void *data) -{ - struct cryptd_state *state = data; - int stop; - - current->flags |= PF_NOFREEZE; - - do { - struct crypto_async_request *req, *backlog; - - mutex_lock(&state->mutex); - __set_current_state(TASK_INTERRUPTIBLE); - - spin_lock_bh(&state->lock); - backlog = crypto_get_backlog(&state->queue); - req = crypto_dequeue_request(&state->queue); - spin_unlock_bh(&state->lock); - - stop = kthread_should_stop(); - - if (stop || req) { - __set_current_state(TASK_RUNNING); - if (req) { - if (backlog) - backlog->complete(backlog, - -EINPROGRESS); - req->complete(req, 0); - } - } - - mutex_unlock(&state->mutex); - - schedule(); - } while (!stop); - - return 0; -} - static int __init cryptd_init(void) { int err; - err = cryptd_create_thread(&state, cryptd_thread, "cryptd"); + err = cryptd_init_queue(&queue, CRYPTD_MAX_CPU_QLEN); if (err) return err; err = crypto_register_template(&cryptd_tmpl); if (err) - kthread_stop(state.task); + cryptd_fini_queue(&queue); return err; } static void __exit cryptd_exit(void) { - cryptd_stop_thread(&state); + cryptd_fini_queue(&queue); crypto_unregister_template(&cryptd_tmpl); } -- cgit v1.2.3 From 0a2e821d627ad5ced23cf31137625b81cc205e0f Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Thu, 19 Feb 2009 14:44:02 +0800 Subject: crypto: chainiv - Use kcrypto_wq instead of keventd_wq keventd_wq has potential starvation problem, so use dedicated kcrypto_wq instead. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 + crypto/chainiv.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 24c31efde882..4a3e6b225189 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -56,6 +56,7 @@ config CRYPTO_BLKCIPHER2 tristate select CRYPTO_ALGAPI2 select CRYPTO_RNG2 + select CRYPTO_WORKQUEUE config CRYPTO_HASH tristate diff --git a/crypto/chainiv.c b/crypto/chainiv.c index 7c37a497b860..ba200b07449d 100644 --- a/crypto/chainiv.c +++ b/crypto/chainiv.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -133,7 +134,7 @@ static int async_chainiv_schedule_work(struct async_chainiv_ctx *ctx) goto out; } - queued = schedule_work(&ctx->postponed); + queued = queue_work(kcrypto_wq, &ctx->postponed); BUG_ON(!queued); out: -- cgit v1.2.3 From 07eba61dd68678e30b24b4776f59798f625e089d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 19 Feb 2009 08:06:35 +0100 Subject: ALSA: hda - Don't enable beep for digital-only ALC262 When ALC262 codec is configured as digital-only, it's meaningless to add the digital beep input. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 192c92a5af38..91da92259c80 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11051,10 +11051,12 @@ static int patch_alc262(struct hda_codec *codec) } } - err = snd_hda_attach_beep_device(codec, 0x1); - if (err < 0) { - alc_free(codec); - return err; + if (!spec->no_analog) { + err = snd_hda_attach_beep_device(codec, 0x1); + if (err < 0) { + alc_free(codec); + return err; + } } if (board_config != ALC262_AUTO) @@ -11087,7 +11089,8 @@ static int patch_alc262(struct hda_codec *codec) } if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); - set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); + if (!spec->no_analog) + set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT); spec->vmaster_nid = 0x0c; -- cgit v1.2.3 From ab9fec099b796b002b6996c4c5845167d8fe6dbd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 19 Feb 2009 08:13:26 +0100 Subject: ALSA: hda - Avoid doubly beep attachment in patch_alc268() Remove the doubly attachment in patch_alc268(). The input beep is attached conditionally only when needed. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 91da92259c80..df32f9353e71 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12100,12 +12100,6 @@ static int patch_alc268(struct hda_codec *codec) } } - err = snd_hda_attach_beep_device(codec, 0x1); - if (err < 0) { - alc_free(codec); - return err; - } - if (board_config != ALC268_AUTO) setup_preset(spec, &alc268_presets[board_config]); -- cgit v1.2.3 From 7e0e44d430281d398769f1d7864e161203252760 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 19 Feb 2009 08:15:49 +0100 Subject: ALSA: hda - Add digital-only mode for ALC268 ALC268 can be configured as digital-only, e.g. for HDMI, on some machines. Allow the parser to set up the digital-only mode. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index df32f9353e71..169b3837af52 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11824,9 +11824,14 @@ static int alc268_parse_auto_config(struct hda_codec *codec) alc268_ignore); if (err < 0) return err; - if (!spec->autocfg.line_outs) + if (!spec->autocfg.line_outs) { + if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) { + spec->multiout.max_channels = 2; + spec->no_analog = 1; + goto dig_only; + } return 0; /* can't find valid BIOS pin config */ - + } err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg); if (err < 0) return err; @@ -11836,10 +11841,12 @@ static int alc268_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = 2; + dig_only: /* digital only support output */ - if (spec->autocfg.dig_outs) + if (spec->autocfg.dig_outs) { spec->multiout.dig_out_nid = ALC268_DIGOUT_NID; - + spec->dig_out_type = spec->autocfg.dig_out_type[0]; + } if (spec->kctls.list) add_mixer(spec, spec->kctls.list); @@ -12140,7 +12147,7 @@ static int patch_alc268(struct hda_codec *codec) (0 << AC_AMPCAP_MUTE_SHIFT)); } - if (!spec->adc_nids && spec->input_mux) { + if (!spec->no_analog && !spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, 0x07); int i; @@ -12764,7 +12771,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - if (!spec->cap_mixer) + if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); store_pin_configs(codec); -- cgit v1.2.3 From bb71858853a5c9616eea98512f4075d4f081154d Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 19 Feb 2009 08:37:13 +0100 Subject: sound: oxygen: make the owner module a parameter of the probe function Move the owner field out of the oxygen_model structure and make it a parameter of oxygen_pci_probe(), because the actual owner module does not depend on the card model. Furthermore, moving it out of the model structure allows us to create the card structure before the actual model is known. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/hifier.c | 3 +-- sound/pci/oxygen/oxygen.c | 3 +-- sound/pci/oxygen/oxygen.h | 2 +- sound/pci/oxygen/oxygen_lib.c | 3 ++- sound/pci/oxygen/virtuoso.c | 5 +---- 5 files changed, 6 insertions(+), 10 deletions(-) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index 1ab833f843eb..cc98bad9916a 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -151,7 +151,6 @@ static const struct oxygen_model model_hifier = { .shortname = "C-Media CMI8787", .longname = "C-Media Oxygen HD Audio", .chip = "CMI8788", - .owner = THIS_MODULE, .init = hifier_init, .control_filter = hifier_control_filter, .cleanup = hifier_cleanup, @@ -185,7 +184,7 @@ static int __devinit hifier_probe(struct pci_dev *pci, ++dev; return -ENOENT; } - err = oxygen_pci_probe(pci, index[dev], id[dev], &model_hifier, 0); + err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, &model_hifier, 0); if (err >= 0) ++dev; return err; diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index de999c6d6dd3..12b6c2137d50 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -315,7 +315,6 @@ static const struct oxygen_model model_generic = { .shortname = "C-Media CMI8788", .longname = "C-Media Oxygen HD Audio", .chip = "CMI8788", - .owner = THIS_MODULE, .probe = generic_probe, .init = generic_init, .cleanup = generic_cleanup, @@ -353,7 +352,7 @@ static int __devinit generic_oxygen_probe(struct pci_dev *pci, ++dev; return -ENOENT; } - err = oxygen_pci_probe(pci, index[dev], id[dev], + err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, &model_generic, pci_id->driver_data); if (err >= 0) ++dev; diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index 19107c6307e5..268bff4f29d2 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -62,7 +62,6 @@ struct oxygen_model { const char *shortname; const char *longname; const char *chip; - struct module *owner; int (*probe)(struct oxygen *chip, unsigned long driver_data); void (*init)(struct oxygen *chip); int (*control_filter)(struct snd_kcontrol_new *template); @@ -134,6 +133,7 @@ struct oxygen { /* oxygen_lib.c */ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, + struct module *owner, const struct oxygen_model *model, unsigned long driver_data); void oxygen_pci_remove(struct pci_dev *pci); diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 9c81e0b05113..b5560fa5a5e3 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -452,6 +452,7 @@ static void oxygen_card_free(struct snd_card *card) } int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, + struct module *owner, const struct oxygen_model *model, unsigned long driver_data) { @@ -459,7 +460,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, struct oxygen *chip; int err; - err = snd_card_create(index, id, model->owner, + err = snd_card_create(index, id, owner, sizeof(*chip) + model->model_data_size, &card); if (err < 0) return err; diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 6c870c12a177..c05f7e7bdb34 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -816,7 +816,6 @@ static int xonar_model_probe(struct oxygen *chip, unsigned long driver_data) static const struct oxygen_model model_xonar_d2 = { .longname = "Asus Virtuoso 200", .chip = "AV200", - .owner = THIS_MODULE, .probe = xonar_model_probe, .init = xonar_d2_init, .control_filter = xonar_d2_control_filter, @@ -849,7 +848,6 @@ static const struct oxygen_model model_xonar_d2 = { static const struct oxygen_model model_xonar_d1 = { .longname = "Asus Virtuoso 100", .chip = "AV200", - .owner = THIS_MODULE, .probe = xonar_model_probe, .init = xonar_d1_init, .control_filter = xonar_d1_control_filter, @@ -878,7 +876,6 @@ static const struct oxygen_model model_xonar_d1 = { static const struct oxygen_model model_xonar_hdav = { .longname = "Asus Virtuoso 200", .chip = "AV200", - .owner = THIS_MODULE, .probe = xonar_model_probe, .init = xonar_hdav_init, .cleanup = xonar_hdav_cleanup, @@ -925,7 +922,7 @@ static int __devinit xonar_probe(struct pci_dev *pci, return -ENOENT; } BUG_ON(pci_id->driver_data >= ARRAY_SIZE(models)); - err = oxygen_pci_probe(pci, index[dev], id[dev], + err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, models[pci_id->driver_data], pci_id->driver_data); if (err >= 0) -- cgit v1.2.3 From 6ed91157093c60e26bf0215b752f07af52935afc Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 19 Feb 2009 08:38:25 +0100 Subject: sound: oxygen: allocate model_data dynamically Allocate the model-specific data dynamically instead of including it in the memory block of the card structure. This will allow us to determine the actual model after the card creation. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen_lib.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index b5560fa5a5e3..228f30800fd9 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -446,6 +446,7 @@ static void oxygen_card_free(struct snd_card *card) free_irq(chip->irq, chip); flush_scheduled_work(); chip->model.cleanup(chip); + kfree(chip->model_data); mutex_destroy(&chip->mutex); pci_release_regions(chip->pci); pci_disable_device(chip->pci); @@ -460,8 +461,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, struct oxygen *chip; int err; - err = snd_card_create(index, id, owner, - sizeof(*chip) + model->model_data_size, &card); + err = snd_card_create(index, id, owner, sizeof(*chip), &card); if (err < 0) return err; @@ -470,7 +470,6 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, chip->pci = pci; chip->irq = -1; chip->model = *model; - chip->model_data = chip + 1; spin_lock_init(&chip->reg_lock); mutex_init(&chip->mutex); INIT_WORK(&chip->spdif_input_bits_work, @@ -496,6 +495,15 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, } chip->addr = pci_resource_start(pci, 0); + if (chip->model.model_data_size) { + chip->model_data = kmalloc(chip->model.model_data_size, + GFP_KERNEL); + if (!chip->model_data) { + err = -ENOMEM; + goto err_pci_regions; + } + } + pci_set_master(pci); snd_card_set_dev(card, &pci->dev); card->private_free = oxygen_card_free; -- cgit v1.2.3 From a69bb3c3fe0881d986ec78e253cb8a6bb9c28230 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 19 Feb 2009 08:38:55 +0100 Subject: sound: oxygen: use static driver name When allocating resources, use a fixed name instead of reading it from the model structure. This allows us to allocate the resources before the actual model is known. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen_lib.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 228f30800fd9..516d94ad2bbb 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -34,6 +34,7 @@ MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("C-Media CMI8788 helper library"); MODULE_LICENSE("GPL v2"); +#define DRIVER "oxygen" static inline int oxygen_uart_input_ready(struct oxygen *chip) { @@ -481,7 +482,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, if (err < 0) goto err_card; - err = pci_request_regions(pci, model->chip); + err = pci_request_regions(pci, DRIVER); if (err < 0) { snd_printk(KERN_ERR "cannot reserve PCI resources\n"); goto err_pci_enable; @@ -517,7 +518,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, chip->model.init(chip); err = request_irq(pci->irq, oxygen_interrupt, IRQF_SHARED, - chip->model.chip, chip); + DRIVER, chip); if (err < 0) { snd_printk(KERN_ERR "cannot grab interrupt %d\n", pci->irq); goto err_card; -- cgit v1.2.3 From 30459d7b1843cbdea56ca120c8cac10dc5613e90 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 19 Feb 2009 08:42:44 +0100 Subject: sound: oxygen: handle cards with broken EEPROM Under as yet unknown circumstances, the first word of the sound card's EEPROM gets overwritten. When this has happened, we cannot rely on the subsystem IDs that the kernel reads from the PCI configuration registers. Instead, we read the IDs directly from the EEPROM and do the ID matching manually. Because the model-specific driver cannot determine the model before calling oxygen_pci_probe(), that function now gets a get_model() callback as parameter. The customizing of the model structure, which was formerly done by the probe() callback, also has moved into get_model(). Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/hifier.c | 11 +++- sound/pci/oxygen/oxygen.c | 44 +++++++------- sound/pci/oxygen/oxygen.h | 17 +++++- sound/pci/oxygen/oxygen_io.c | 15 +++++ sound/pci/oxygen/oxygen_lib.c | 51 +++++++++++++--- sound/pci/oxygen/virtuoso.c | 134 +++++++++++++++++++++++------------------- 6 files changed, 179 insertions(+), 93 deletions(-) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index cc98bad9916a..84ef13183419 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -45,6 +45,7 @@ MODULE_PARM_DESC(enable, "enable card"); static struct pci_device_id hifier_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x14c3, 0x1710) }, { OXYGEN_PCI_SUBID(0x14c3, 0x1711) }, + { OXYGEN_PCI_SUBID_BROKEN_EEPROM }, { } }; MODULE_DEVICE_TABLE(pci, hifier_ids); @@ -172,6 +173,13 @@ static const struct oxygen_model model_hifier = { .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }; +static int __devinit get_hifier_model(struct oxygen *chip, + const struct pci_device_id *id) +{ + chip->model = model_hifier; + return 0; +} + static int __devinit hifier_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { @@ -184,7 +192,8 @@ static int __devinit hifier_probe(struct pci_dev *pci, ++dev; return -ENOENT; } - err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, &model_hifier, 0); + err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, + hifier_ids, get_hifier_model); if (err >= 0) ++dev; return err; diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index 12b6c2137d50..f2c37f379d39 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -293,29 +293,10 @@ static void set_ak5385_params(struct oxygen *chip, static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0); -static int generic_probe(struct oxygen *chip, unsigned long driver_data) -{ - if (driver_data == MODEL_MERIDIAN) { - chip->model.init = meridian_init; - chip->model.resume = meridian_resume; - chip->model.set_adc_params = set_ak5385_params; - chip->model.device_config = PLAYBACK_0_TO_I2S | - PLAYBACK_1_TO_SPDIF | - CAPTURE_0_FROM_I2S_2 | - CAPTURE_1_FROM_SPDIF; - } - if (driver_data == MODEL_MERIDIAN || driver_data == MODEL_HALO) { - chip->model.misc_flags = OXYGEN_MISC_MIDI; - chip->model.device_config |= MIDI_OUTPUT | MIDI_INPUT; - } - return 0; -} - static const struct oxygen_model model_generic = { .shortname = "C-Media CMI8788", .longname = "C-Media Oxygen HD Audio", .chip = "CMI8788", - .probe = generic_probe, .init = generic_init, .cleanup = generic_cleanup, .resume = generic_resume, @@ -340,6 +321,29 @@ static const struct oxygen_model model_generic = { .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }; +static int __devinit get_oxygen_model(struct oxygen *chip, + const struct pci_device_id *id) +{ + chip->model = model_generic; + switch (id->driver_data) { + case MODEL_MERIDIAN: + chip->model.init = meridian_init; + chip->model.resume = meridian_resume; + chip->model.set_adc_params = set_ak5385_params; + chip->model.device_config = PLAYBACK_0_TO_I2S | + PLAYBACK_1_TO_SPDIF | + CAPTURE_0_FROM_I2S_2 | + CAPTURE_1_FROM_SPDIF; + break; + } + if (id->driver_data == MODEL_MERIDIAN || + id->driver_data == MODEL_HALO) { + chip->model.misc_flags = OXYGEN_MISC_MIDI; + chip->model.device_config |= MIDI_OUTPUT | MIDI_INPUT; + } + return 0; +} + static int __devinit generic_oxygen_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { @@ -353,7 +357,7 @@ static int __devinit generic_oxygen_probe(struct pci_dev *pci, return -ENOENT; } err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, - &model_generic, pci_id->driver_data); + oxygen_ids, get_oxygen_model); if (err >= 0) ++dev; return err; diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index 268bff4f29d2..c500d48ea349 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -49,7 +49,13 @@ enum { .subvendor = sv, \ .subdevice = sd +#define BROKEN_EEPROM_DRIVER_DATA ((unsigned long)-1) +#define OXYGEN_PCI_SUBID_BROKEN_EEPROM \ + OXYGEN_PCI_SUBID(PCI_VENDOR_ID_CMEDIA, 0x8788), \ + .driver_data = BROKEN_EEPROM_DRIVER_DATA + struct pci_dev; +struct pci_device_id; struct snd_card; struct snd_pcm_substream; struct snd_pcm_hardware; @@ -62,7 +68,6 @@ struct oxygen_model { const char *shortname; const char *longname; const char *chip; - int (*probe)(struct oxygen *chip, unsigned long driver_data); void (*init)(struct oxygen *chip); int (*control_filter)(struct snd_kcontrol_new *template); int (*mixer_init)(struct oxygen *chip); @@ -82,6 +87,7 @@ struct oxygen_model { void (*ac97_switch)(struct oxygen *chip, unsigned int reg, unsigned int mute); const unsigned int *dac_tlv; + unsigned long private_data; size_t model_data_size; unsigned int device_config; u8 dac_channels; @@ -134,8 +140,11 @@ struct oxygen { int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, struct module *owner, - const struct oxygen_model *model, - unsigned long driver_data); + const struct pci_device_id *ids, + int (*get_model)(struct oxygen *chip, + const struct pci_device_id *id + ) + ); void oxygen_pci_remove(struct pci_dev *pci); #ifdef CONFIG_PM int oxygen_pci_suspend(struct pci_dev *pci, pm_message_t state); @@ -180,6 +189,8 @@ void oxygen_write_i2c(struct oxygen *chip, u8 device, u8 map, u8 data); void oxygen_reset_uart(struct oxygen *chip); void oxygen_write_uart(struct oxygen *chip, u8 data); +u16 oxygen_read_eeprom(struct oxygen *chip, unsigned int index); + static inline void oxygen_set_bits8(struct oxygen *chip, unsigned int reg, u8 value) { diff --git a/sound/pci/oxygen/oxygen_io.c b/sound/pci/oxygen/oxygen_io.c index 3126c4b403dd..05f48ef1a442 100644 --- a/sound/pci/oxygen/oxygen_io.c +++ b/sound/pci/oxygen/oxygen_io.c @@ -254,3 +254,18 @@ void oxygen_write_uart(struct oxygen *chip, u8 data) _write_uart(chip, 0, data); } EXPORT_SYMBOL(oxygen_write_uart); + +u16 oxygen_read_eeprom(struct oxygen *chip, unsigned int index) +{ + unsigned int timeout; + + oxygen_write8(chip, OXYGEN_EEPROM_CONTROL, + index | OXYGEN_EEPROM_DIR_READ); + for (timeout = 0; timeout < 100; ++timeout) { + udelay(1); + if (!(oxygen_read8(chip, OXYGEN_EEPROM_STATUS) + & OXYGEN_EEPROM_BUSY)) + break; + } + return oxygen_read16(chip, OXYGEN_EEPROM_DATA); +} diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 516d94ad2bbb..d83c3a957323 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -244,6 +244,34 @@ static void oxygen_proc_init(struct oxygen *chip) #define oxygen_proc_init(chip) #endif +static const struct pci_device_id * +oxygen_search_pci_id(struct oxygen *chip, const struct pci_device_id ids[]) +{ + u16 subdevice; + + /* + * Make sure the EEPROM pins are available, i.e., not used for SPI. + * (This function is called before we initialize or use SPI.) + */ + oxygen_clear_bits8(chip, OXYGEN_FUNCTION, + OXYGEN_FUNCTION_ENABLE_SPI_4_5); + /* + * Read the subsystem device ID directly from the EEPROM, because the + * chip didn't if the first EEPROM word was overwritten. + */ + subdevice = oxygen_read_eeprom(chip, 2); + /* + * We use only the subsystem device ID for searching because it is + * unique even without the subsystem vendor ID, which may have been + * overwritten in the EEPROM. + */ + for (; ids->vendor; ++ids) + if (ids->subdevice == subdevice && + ids->driver_data != BROKEN_EEPROM_DRIVER_DATA) + return ids; + return NULL; +} + static void oxygen_init(struct oxygen *chip) { unsigned int i; @@ -455,11 +483,15 @@ static void oxygen_card_free(struct snd_card *card) int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, struct module *owner, - const struct oxygen_model *model, - unsigned long driver_data) + const struct pci_device_id *ids, + int (*get_model)(struct oxygen *chip, + const struct pci_device_id *id + ) + ) { struct snd_card *card; struct oxygen *chip; + const struct pci_device_id *pci_id; int err; err = snd_card_create(index, id, owner, sizeof(*chip), &card); @@ -470,7 +502,6 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, chip->card = card; chip->pci = pci; chip->irq = -1; - chip->model = *model; spin_lock_init(&chip->reg_lock); mutex_init(&chip->mutex); INIT_WORK(&chip->spdif_input_bits_work, @@ -496,6 +527,15 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, } chip->addr = pci_resource_start(pci, 0); + pci_id = oxygen_search_pci_id(chip, ids); + if (!pci_id) { + err = -ENODEV; + goto err_pci_regions; + } + err = get_model(chip, pci_id); + if (err < 0) + goto err_pci_regions; + if (chip->model.model_data_size) { chip->model_data = kmalloc(chip->model.model_data_size, GFP_KERNEL); @@ -509,11 +549,6 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, snd_card_set_dev(card, &pci->dev); card->private_free = oxygen_card_free; - if (chip->model.probe) { - err = chip->model.probe(chip, driver_data); - if (err < 0) - goto err_card; - } oxygen_init(chip); chip->model.init(chip); diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index c05f7e7bdb34..4ac49772da8c 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -160,6 +160,7 @@ static struct pci_device_id xonar_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X }, { OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV }, { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 }, + { OXYGEN_PCI_SUBID_BROKEN_EEPROM }, { } }; MODULE_DEVICE_TABLE(pci, xonar_ids); @@ -188,7 +189,6 @@ MODULE_DEVICE_TABLE(pci, xonar_ids); #define I2C_DEVICE_CS4362A 0x30 /* 001100, AD0=0, /W=0 */ struct xonar_data { - unsigned int model; unsigned int anti_pop_delay; unsigned int dacs; u16 output_enable_bit; @@ -334,15 +334,9 @@ static void xonar_d2_init(struct oxygen *chip) struct xonar_data *data = chip->model_data; data->anti_pop_delay = 300; + data->dacs = 4; data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE; data->pcm1796_oversampling = PCM1796_OS_64; - if (data->model == MODEL_D2X) { - data->ext_power_reg = OXYGEN_GPIO_DATA; - data->ext_power_int_reg = OXYGEN_GPIO_INTERRUPT_MASK; - data->ext_power_bit = GPIO_D2X_EXT_POWER; - oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, - GPIO_D2X_EXT_POWER); - } pcm1796_init(chip); @@ -355,6 +349,18 @@ static void xonar_d2_init(struct oxygen *chip) snd_component_add(chip->card, "CS5381"); } +static void xonar_d2x_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + data->ext_power_reg = OXYGEN_GPIO_DATA; + data->ext_power_int_reg = OXYGEN_GPIO_INTERRUPT_MASK; + data->ext_power_bit = GPIO_D2X_EXT_POWER; + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2X_EXT_POWER); + + xonar_d2_init(chip); +} + static void update_cs4362a_volumes(struct oxygen *chip) { u8 mute; @@ -422,11 +428,6 @@ static void xonar_d1_init(struct oxygen *chip) data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST; data->cs4362a_fm = CS4362A_FM_SINGLE | CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; - if (data->model == MODEL_DX) { - data->ext_power_reg = OXYGEN_GPI_DATA; - data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; - data->ext_power_bit = GPI_DX_EXT_POWER; - } oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, OXYGEN_2WIRE_LENGTH_8 | @@ -447,6 +448,17 @@ static void xonar_d1_init(struct oxygen *chip) snd_component_add(chip->card, "CS5361"); } +static void xonar_dx_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + data->ext_power_reg = OXYGEN_GPI_DATA; + data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; + data->ext_power_bit = GPI_DX_EXT_POWER; + + xonar_d1_init(chip); +} + static void xonar_hdav_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -458,6 +470,7 @@ static void xonar_hdav_init(struct oxygen *chip) OXYGEN_2WIRE_SPEED_FAST); data->anti_pop_delay = 100; + data->dacs = chip->model.private_data == MODEL_HDAV_H6 ? 4 : 1; data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; data->ext_power_reg = OXYGEN_GPI_DATA; data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; @@ -773,50 +786,9 @@ static int xonar_d1_mixer_init(struct oxygen *chip) return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip)); } -static int xonar_model_probe(struct oxygen *chip, unsigned long driver_data) -{ - static const char *const names[] = { - [MODEL_D1] = "Xonar D1", - [MODEL_DX] = "Xonar DX", - [MODEL_D2] = "Xonar D2", - [MODEL_D2X] = "Xonar D2X", - [MODEL_HDAV] = "Xonar HDAV1.3", - [MODEL_HDAV_H6] = "Xonar HDAV1.3+H6", - }; - static const u8 dacs[] = { - [MODEL_D1] = 2, - [MODEL_DX] = 2, - [MODEL_D2] = 4, - [MODEL_D2X] = 4, - [MODEL_HDAV] = 1, - [MODEL_HDAV_H6] = 4, - }; - struct xonar_data *data = chip->model_data; - - data->model = driver_data; - if (data->model == MODEL_HDAV) { - oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, - GPIO_HDAV_DB_MASK); - switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & - GPIO_HDAV_DB_MASK) { - case GPIO_HDAV_DB_H6: - data->model = MODEL_HDAV_H6; - break; - case GPIO_HDAV_DB_XX: - snd_printk(KERN_ERR "unknown daughterboard\n"); - return -ENODEV; - } - } - - data->dacs = dacs[data->model]; - chip->model.shortname = names[data->model]; - return 0; -} - static const struct oxygen_model model_xonar_d2 = { .longname = "Asus Virtuoso 200", .chip = "AV200", - .probe = xonar_model_probe, .init = xonar_d2_init, .control_filter = xonar_d2_control_filter, .mixer_init = xonar_d2_mixer_init, @@ -848,7 +820,6 @@ static const struct oxygen_model model_xonar_d2 = { static const struct oxygen_model model_xonar_d1 = { .longname = "Asus Virtuoso 100", .chip = "AV200", - .probe = xonar_model_probe, .init = xonar_d1_init, .control_filter = xonar_d1_control_filter, .mixer_init = xonar_d1_mixer_init, @@ -876,7 +847,6 @@ static const struct oxygen_model model_xonar_d1 = { static const struct oxygen_model model_xonar_hdav = { .longname = "Asus Virtuoso 200", .chip = "AV200", - .probe = xonar_model_probe, .init = xonar_hdav_init, .cleanup = xonar_hdav_cleanup, .suspend = xonar_hdav_suspend, @@ -902,8 +872,8 @@ static const struct oxygen_model model_xonar_hdav = { .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }; -static int __devinit xonar_probe(struct pci_dev *pci, - const struct pci_device_id *pci_id) +static int __devinit get_xonar_model(struct oxygen *chip, + const struct pci_device_id *id) { static const struct oxygen_model *const models[] = { [MODEL_D1] = &model_xonar_d1, @@ -912,6 +882,50 @@ static int __devinit xonar_probe(struct pci_dev *pci, [MODEL_D2X] = &model_xonar_d2, [MODEL_HDAV] = &model_xonar_hdav, }; + static const char *const names[] = { + [MODEL_D1] = "Xonar D1", + [MODEL_DX] = "Xonar DX", + [MODEL_D2] = "Xonar D2", + [MODEL_D2X] = "Xonar D2X", + [MODEL_HDAV] = "Xonar HDAV1.3", + [MODEL_HDAV_H6] = "Xonar HDAV1.3+H6", + }; + unsigned int model = id->driver_data; + + if (model >= ARRAY_SIZE(models) || !models[model]) + return -EINVAL; + chip->model = *models[model]; + + switch (model) { + case MODEL_D2X: + chip->model.init = xonar_d2x_init; + break; + case MODEL_DX: + chip->model.init = xonar_dx_init; + break; + case MODEL_HDAV: + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, + GPIO_HDAV_DB_MASK); + switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & + GPIO_HDAV_DB_MASK) { + case GPIO_HDAV_DB_H6: + model = MODEL_HDAV_H6; + break; + case GPIO_HDAV_DB_XX: + snd_printk(KERN_ERR "unknown daughterboard\n"); + return -ENODEV; + } + break; + } + + chip->model.shortname = names[model]; + chip->model.private_data = model; + return 0; +} + +static int __devinit xonar_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ static int dev; int err; @@ -921,10 +935,8 @@ static int __devinit xonar_probe(struct pci_dev *pci, ++dev; return -ENOENT; } - BUG_ON(pci_id->driver_data >= ARRAY_SIZE(models)); err = oxygen_pci_probe(pci, index[dev], id[dev], THIS_MODULE, - models[pci_id->driver_data], - pci_id->driver_data); + xonar_ids, get_xonar_model); if (err >= 0) ++dev; return err; -- cgit v1.2.3 From 1275d6f608abda23d101ada17dc39940192d4bc4 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 19 Feb 2009 08:44:12 +0100 Subject: sound: oxygen: automatically restore overwritten EEPROM If the EEPROM was partially overwritten (which seems to happen before the OS is booted), restore its entire contents by deducing it from the remaining information. This does not have any effect on the Linux driver, which works even with incomplete information in the EEPROM, but it makes other drivers work again. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen.h | 3 +++ sound/pci/oxygen/oxygen_io.c | 16 ++++++++++++++++ sound/pci/oxygen/oxygen_lib.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 48 insertions(+) diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index c500d48ea349..bd615dbffadb 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -18,6 +18,8 @@ #define OXYGEN_IO_SIZE 0x100 +#define OXYGEN_EEPROM_ID 0x434d /* "CM" */ + /* model-specific configuration of outputs/inputs */ #define PLAYBACK_0_TO_I2S 0x0001 /* PLAYBACK_0_TO_AC97_0 not implemented */ @@ -190,6 +192,7 @@ void oxygen_reset_uart(struct oxygen *chip); void oxygen_write_uart(struct oxygen *chip, u8 data); u16 oxygen_read_eeprom(struct oxygen *chip, unsigned int index); +void oxygen_write_eeprom(struct oxygen *chip, unsigned int index, u16 value); static inline void oxygen_set_bits8(struct oxygen *chip, unsigned int reg, u8 value) diff --git a/sound/pci/oxygen/oxygen_io.c b/sound/pci/oxygen/oxygen_io.c index 05f48ef1a442..c1eb923f2ac9 100644 --- a/sound/pci/oxygen/oxygen_io.c +++ b/sound/pci/oxygen/oxygen_io.c @@ -269,3 +269,19 @@ u16 oxygen_read_eeprom(struct oxygen *chip, unsigned int index) } return oxygen_read16(chip, OXYGEN_EEPROM_DATA); } + +void oxygen_write_eeprom(struct oxygen *chip, unsigned int index, u16 value) +{ + unsigned int timeout; + + oxygen_write16(chip, OXYGEN_EEPROM_DATA, value); + oxygen_write8(chip, OXYGEN_EEPROM_CONTROL, + index | OXYGEN_EEPROM_DIR_WRITE); + for (timeout = 0; timeout < 10; ++timeout) { + msleep(1); + if (!(oxygen_read8(chip, OXYGEN_EEPROM_STATUS) + & OXYGEN_EEPROM_BUSY)) + return; + } + snd_printk(KERN_ERR "EEPROM write timeout\n"); +} diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index d83c3a957323..6e1cdd2fd768 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -272,6 +272,34 @@ oxygen_search_pci_id(struct oxygen *chip, const struct pci_device_id ids[]) return NULL; } +static void oxygen_restore_eeprom(struct oxygen *chip, + const struct pci_device_id *id) +{ + if (oxygen_read_eeprom(chip, 0) != OXYGEN_EEPROM_ID) { + /* + * This function gets called only when a known card model has + * been detected, i.e., we know there is a valid subsystem + * product ID at index 2 in the EEPROM. Therefore, we have + * been able to deduce the correct subsystem vendor ID, and + * this is enough information to restore the original EEPROM + * contents. + */ + oxygen_write_eeprom(chip, 1, id->subvendor); + oxygen_write_eeprom(chip, 0, OXYGEN_EEPROM_ID); + + oxygen_set_bits8(chip, OXYGEN_MISC, + OXYGEN_MISC_WRITE_PCI_SUBID); + pci_write_config_word(chip->pci, PCI_SUBSYSTEM_VENDOR_ID, + id->subvendor); + pci_write_config_word(chip->pci, PCI_SUBSYSTEM_ID, + id->subdevice); + oxygen_clear_bits8(chip, OXYGEN_MISC, + OXYGEN_MISC_WRITE_PCI_SUBID); + + snd_printk(KERN_INFO "EEPROM ID restored\n"); + } +} + static void oxygen_init(struct oxygen *chip) { unsigned int i; @@ -532,6 +560,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, err = -ENODEV; goto err_pci_regions; } + oxygen_restore_eeprom(chip, pci_id); err = get_model(chip, pci_id); if (err < 0) goto err_pci_regions; -- cgit v1.2.3 From eca985d28e1a8092ba2686ec5485fd688df5cfb3 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 18 Feb 2009 19:07:18 +0100 Subject: sound: Remove documentation for OSS CS4232 driver There is no OSS cs4232 driver in the kernel any more and this documentation does not contain any info useful for ALSA driver. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- Documentation/sound/oss/CS4232 | 23 ----------------------- 1 file changed, 23 deletions(-) delete mode 100644 Documentation/sound/oss/CS4232 diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232 deleted file mode 100644 index 7d6af7a5c1c2..000000000000 --- a/Documentation/sound/oss/CS4232 +++ /dev/null @@ -1,23 +0,0 @@ -To configure the Crystal CS423x sound chip and activate its DSP functions, -modules may be loaded in this order: - - modprobe sound - insmod ad1848 - insmod uart401 - insmod cs4232 io=* irq=* dma=* dma2=* - -This is the meaning of the parameters: - - io--I/O address of the Windows Sound System (normally 0x534) - irq--IRQ of this device - dma and dma2--DMA channels (DMA2 may be 0) - -On some cards, the board attempts to do non-PnP setup, and fails. If you -have problems, use Linux' PnP facilities. - -To get MIDI facilities add - - insmod opl3 io=* - -where "io" is the I/O address of the OPL3 synthesizer. This will be shown -in /proc/sys/pnp and is normally 0x388. -- cgit v1.2.3 From ce3bdaa8710c10eec5a6dae67aaf73088d0ced4f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 19 Feb 2009 14:29:49 +0000 Subject: ASoC: Disable WM8731 line bypass by default MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This avoids temporarily enabling the ouput stages during startup which can cause audible effets in the output stages. Reported-by: Fredrik RedgÃ¥rd Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 4cac3195bfa3..9e7ebcc2c491 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -594,6 +594,10 @@ static int wm8731_register(struct wm8731_priv *wm8731) reg = wm8731_read_reg_cache(codec, WM8731_RINVOL); wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100); + /* Disable bypass path by default */ + reg = wm8731_read_reg_cache(codec, WM8731_APANA); + wm8731_write(codec, WM8731_APANA, reg & ~0x4); + wm8731_codec = codec; ret = snd_soc_register_codec(codec); -- cgit v1.2.3 From d91b424d6d7bda0773b6b6b606d48d089c4f5115 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 20 Feb 2009 09:31:14 +0100 Subject: sound: oxygen: handle AK5385 ADC on Claro halo cards The HT-Omega Claro halo's ADC is an AK5385 instead of a WM8785, so we should handle the ADC parameters as we do with the X-Meridian. Using the code for the wrong ADC does not seem to have any audible effects, and the Windows driver does it, but it is nonetheless a good idea to run the AK5385 with an oversampling ratio that is not outside the documented limits. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index f2c37f379d39..1d8e2b29745d 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -196,6 +196,12 @@ static void meridian_init(struct oxygen *chip) ak5385_init(chip); } +static void halo_init(struct oxygen *chip) +{ + ak4396_init(chip); + ak5385_init(chip); +} + static void generic_cleanup(struct oxygen *chip) { } @@ -211,6 +217,11 @@ static void meridian_resume(struct oxygen *chip) ak4396_registers_init(chip); } +static void halo_resume(struct oxygen *chip) +{ + ak4396_registers_init(chip); +} + static void set_ak4396_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { @@ -335,6 +346,11 @@ static int __devinit get_oxygen_model(struct oxygen *chip, CAPTURE_0_FROM_I2S_2 | CAPTURE_1_FROM_SPDIF; break; + case MODEL_HALO: + chip->model.init = halo_init; + chip->model.resume = halo_resume; + chip->model.set_adc_params = set_ak5385_params; + break; } if (id->driver_data == MODEL_MERIDIAN || id->driver_data == MODEL_HALO) { -- cgit v1.2.3 From eacbb9dba6b4c982a0217ea2c7d15db88d4fda37 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 20 Feb 2009 09:33:40 +0100 Subject: sound: virtuoso: increase minimum volume to -60 dB Use -60 dB as the minimum value of the master volume mixer control. While the DACs would support ranges down to about -120 dB, such attenuations are not useful in practice. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/virtuoso.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 4ac49772da8c..00dc97806f1b 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -758,8 +758,8 @@ static void xonar_line_mic_ac97_switch(struct oxygen *chip, } } -static const DECLARE_TLV_DB_SCALE(pcm1796_db_scale, -12000, 50, 0); -static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -12700, 100, 0); +static const DECLARE_TLV_DB_SCALE(pcm1796_db_scale, -6000, 50, 0); +static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -6000, 100, 0); static int xonar_d2_control_filter(struct snd_kcontrol_new *template) { @@ -808,8 +808,8 @@ static const struct oxygen_model model_xonar_d2 = { MIDI_OUTPUT | MIDI_INPUT, .dac_channels = 8, - .dac_volume_min = 0x0f, - .dac_volume_max = 0xff, + .dac_volume_min = 255 - 2*60, + .dac_volume_max = 255, .misc_flags = OXYGEN_MISC_MIDI, .function_flags = OXYGEN_FUNCTION_SPI | OXYGEN_FUNCTION_ENABLE_SPI_4_5, @@ -837,7 +837,7 @@ static const struct oxygen_model model_xonar_d1 = { PLAYBACK_1_TO_SPDIF | CAPTURE_0_FROM_I2S_2, .dac_channels = 8, - .dac_volume_min = 0, + .dac_volume_min = 127 - 60, .dac_volume_max = 127, .function_flags = OXYGEN_FUNCTION_2WIRE, .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, @@ -864,8 +864,8 @@ static const struct oxygen_model model_xonar_hdav = { PLAYBACK_1_TO_SPDIF | CAPTURE_0_FROM_I2S_2, .dac_channels = 8, - .dac_volume_min = 0x0f, - .dac_volume_max = 0xff, + .dac_volume_min = 255 - 2*60, + .dac_volume_max = 255, .misc_flags = OXYGEN_MISC_MIDI, .function_flags = OXYGEN_FUNCTION_2WIRE, .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, -- cgit v1.2.3 From f3990e610a157e9c36af85a75bc66260dff31f40 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 20 Feb 2009 09:32:40 +0100 Subject: sound: usb-audio: remove MIN_PACKS_URB Remove the MIN_PACKS_URB symbol because other limits can force the number of packets down to one, regardless of the value of this symbol, and nobody has ever changed it anyway. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index c69cc6e4f549..2b24496ddec7 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -107,7 +107,6 @@ MODULE_PARM_DESC(ignore_ctl_error, #define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */ #define MAX_URBS 8 #define SYNC_URBS 4 /* always four urbs for sync */ -#define MIN_PACKS_URB 1 /* minimum 1 packet per urb */ #define MAX_QUEUE 24 /* try not to exceed this queue length, in ms */ struct audioformat { @@ -1071,8 +1070,7 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri subs->packs_per_ms = packs_per_ms; if (is_playback) { - urb_packs = nrpacks; - urb_packs = max(urb_packs, (unsigned int)MIN_PACKS_URB); + urb_packs = max(nrpacks, 1); urb_packs = min(urb_packs, (unsigned int)MAX_PACKS); } else urb_packs = 1; @@ -1093,9 +1091,9 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri total_packs = (total_packs + packs_per_ms - 1) & ~(packs_per_ms - 1); /* we need at least two URBs for queueing */ - if (total_packs < 2 * MIN_PACKS_URB * packs_per_ms) - total_packs = 2 * MIN_PACKS_URB * packs_per_ms; - else { + if (total_packs < 2 * packs_per_ms) { + total_packs = 2 * packs_per_ms; + } else { /* and we don't want too long a queue either */ maxpacks = max((unsigned int)MAX_QUEUE, urb_packs * 2); if (total_packs > maxpacks * packs_per_ms) @@ -1909,7 +1907,7 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre * in the current code assume the 1ms period. */ snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME, - 1000 * MIN_PACKS_URB, + 1000, /*(nrpacks * MAX_URBS) * 1000*/ UINT_MAX); err = check_hw_params_convention(subs); @@ -3753,7 +3751,7 @@ static int usb_audio_resume(struct usb_interface *intf) static int __init snd_usb_audio_init(void) { - if (nrpacks < MIN_PACKS_URB || nrpacks > MAX_PACKS) { + if (nrpacks < 1 || nrpacks > MAX_PACKS) { printk(KERN_WARNING "invalid nrpacks value.\n"); return -EINVAL; } -- cgit v1.2.3 From 0da0a420bb542b13ebae142109a9d2045ade0cb1 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Thu, 19 Feb 2009 21:23:50 -0500 Subject: integrity: ima scatterlist bug fix Based on Alexander Beregalov's post http://lkml.org/lkml/2009/2/19/198 - replaced sg_set_buf() with sg_init_one() kernel BUG at include/linux/scatterlist.h:65! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: CPU 2 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.29-rc5-next-20090219 #5 PowerEdge 1950 RIP: 0010:[] [] ima_calc_hash+0xc0/0x160 RSP: 0018:ffff88007f46bc40 EFLAGS: 00010286 RAX: ffffe200032c45e8 RBX: 00000000fffffff4 RCX: 0000000087654321 RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff88007cf71048 RBP: ffff88007f46bcd0 R08: 0000000000000000 R09: 0000000000000163 R10: ffff88007f4707a8 R11: 0000000000000000 R12: ffff88007cf71048 R13: 0000000000001000 R14: 0000000000000000 R15: 0000000000009d98 FS: 0000000000000000(0000) GS:ffff8800051ac000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Signed-off-by: Mimi Zohar Tested-by: Alexander Beregalov Signed-off-by: James Morris --- security/integrity/ima/ima_crypto.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c index c2a46e40999d..50d572b74caf 100644 --- a/security/integrity/ima/ima_crypto.c +++ b/security/integrity/ima/ima_crypto.c @@ -68,7 +68,7 @@ int ima_calc_hash(struct file *file, char *digest) break; } offset += rbuf_len; - sg_set_buf(sg, rbuf, rbuf_len); + sg_init_one(sg, rbuf, rbuf_len); rc = crypto_hash_update(&desc, sg, rbuf_len); if (rc) @@ -95,7 +95,7 @@ int ima_calc_template_hash(int template_len, void *template, char *digest) if (rc != 0) return rc; - sg_set_buf(sg, template, template_len); + sg_init_one(sg, template, template_len); rc = crypto_hash_update(&desc, sg, template_len); if (!rc) rc = crypto_hash_final(&desc, digest); -- cgit v1.2.3 From 3be141494a080a9189b51fa78154c975ad8d9806 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 20 Feb 2009 14:11:16 +0100 Subject: ALSA: hda - Add generic pincfg initialization Added the generic pincfg cache and save/restore functions. Also introduced the pin-overriding via hwdep sysfs. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 151 +++++++++++++++++++++++++++++++++++++++++++--- sound/pci/hda/hda_codec.h | 15 +++++ sound/pci/hda/hda_hwdep.c | 66 ++++++++++++++++++++ 3 files changed, 223 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 98884bc8f35f..6fa871f66a72 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -682,11 +682,132 @@ static int read_widget_caps(struct hda_codec *codec, hda_nid_t fg_node) return 0; } +/* read all pin default configurations and save codec->init_pins */ +static int read_pin_defaults(struct hda_codec *codec) +{ + int i; + hda_nid_t nid = codec->start_nid; + + for (i = 0; i < codec->num_nodes; i++, nid++) { + struct hda_pincfg *pin; + unsigned int wcaps = get_wcaps(codec, nid); + unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >> + AC_WCAP_TYPE_SHIFT; + if (wid_type != AC_WID_PIN) + continue; + pin = snd_array_new(&codec->init_pins); + if (!pin) + return -ENOMEM; + pin->nid = nid; + pin->cfg = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_CONFIG_DEFAULT, 0); + } + return 0; +} + +/* look up the given pin config list and return the item matching with NID */ +static struct hda_pincfg *look_up_pincfg(struct hda_codec *codec, + struct snd_array *array, + hda_nid_t nid) +{ + int i; + for (i = 0; i < array->used; i++) { + struct hda_pincfg *pin = snd_array_elem(array, i); + if (pin->nid == nid) + return pin; + } + return NULL; +} + +/* write a config value for the given NID */ +static void set_pincfg(struct hda_codec *codec, hda_nid_t nid, + unsigned int cfg) +{ + int i; + for (i = 0; i < 4; i++) { + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 + i, + cfg & 0xff); + cfg >>= 8; + } +} + +/* set the current pin config value for the given NID. + * the value is cached, and read via snd_hda_codec_get_pincfg() + */ +int snd_hda_add_pincfg(struct hda_codec *codec, struct snd_array *list, + hda_nid_t nid, unsigned int cfg) +{ + struct hda_pincfg *pin; + + pin = look_up_pincfg(codec, list, nid); + if (!pin) { + pin = snd_array_new(list); + if (!pin) + return -ENOMEM; + pin->nid = nid; + } + pin->cfg = cfg; + set_pincfg(codec, nid, cfg); + return 0; +} + +int snd_hda_codec_set_pincfg(struct hda_codec *codec, + hda_nid_t nid, unsigned int cfg) +{ + return snd_hda_add_pincfg(codec, &codec->cur_pins, nid, cfg); +} +EXPORT_SYMBOL_HDA(snd_hda_codec_set_pincfg); + +/* get the current pin config value of the given pin NID */ +unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid) +{ + struct hda_pincfg *pin; + + pin = look_up_pincfg(codec, &codec->cur_pins, nid); + if (pin) + return pin->cfg; +#ifdef CONFIG_SND_HDA_HWDEP + pin = look_up_pincfg(codec, &codec->override_pins, nid); + if (pin) + return pin->cfg; +#endif + pin = look_up_pincfg(codec, &codec->init_pins, nid); + if (pin) + return pin->cfg; + return 0; +} +EXPORT_SYMBOL_HDA(snd_hda_codec_get_pincfg); + +/* restore all current pin configs */ +static void restore_pincfgs(struct hda_codec *codec) +{ + int i; + for (i = 0; i < codec->init_pins.used; i++) { + struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i); + set_pincfg(codec, pin->nid, + snd_hda_codec_get_pincfg(codec, pin->nid)); + } +} static void init_hda_cache(struct hda_cache_rec *cache, unsigned int record_size); static void free_hda_cache(struct hda_cache_rec *cache); +/* restore the initial pin cfgs and release all pincfg lists */ +static void restore_init_pincfgs(struct hda_codec *codec) +{ + /* first free cur_pins and override_pins, then call restore_pincfg + * so that only the values in init_pins are restored + */ + snd_array_free(&codec->cur_pins); +#ifdef CONFIG_SND_HDA_HWDEP + snd_array_free(&codec->override_pins); +#endif + restore_pincfgs(codec); + snd_array_free(&codec->init_pins); +} + /* * codec destructor */ @@ -694,6 +815,7 @@ static void snd_hda_codec_free(struct hda_codec *codec) { if (!codec) return; + restore_init_pincfgs(codec); #ifdef CONFIG_SND_HDA_POWER_SAVE cancel_delayed_work(&codec->power_work); flush_workqueue(codec->bus->workq); @@ -751,6 +873,8 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info)); init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head)); snd_array_init(&codec->mixers, sizeof(struct snd_kcontrol *), 32); + snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16); + snd_array_init(&codec->cur_pins, sizeof(struct hda_pincfg), 16); if (codec->bus->modelname) { codec->modelname = kstrdup(codec->bus->modelname, GFP_KERNEL); if (!codec->modelname) { @@ -787,15 +911,18 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr setup_fg_nodes(codec); if (!codec->afg && !codec->mfg) { snd_printdd("hda_codec: no AFG or MFG node found\n"); - snd_hda_codec_free(codec); - return -ENODEV; + err = -ENODEV; + goto error; } - if (read_widget_caps(codec, codec->afg ? codec->afg : codec->mfg) < 0) { + err = read_widget_caps(codec, codec->afg ? codec->afg : codec->mfg); + if (err < 0) { snd_printk(KERN_ERR "hda_codec: cannot malloc\n"); - snd_hda_codec_free(codec); - return -ENOMEM; + goto error; } + err = read_pin_defaults(codec); + if (err < 0) + goto error; if (!codec->subsystem_id) { hda_nid_t nid = codec->afg ? codec->afg : codec->mfg; @@ -808,10 +935,8 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr if (do_init) { err = snd_hda_codec_configure(codec); - if (err < 0) { - snd_hda_codec_free(codec); - return err; - } + if (err < 0) + goto error; } snd_hda_codec_proc_new(codec); @@ -824,6 +949,10 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr if (codecp) *codecp = codec; return 0; + + error: + snd_hda_codec_free(codec); + return err; } EXPORT_SYMBOL_HDA(snd_hda_codec_new); @@ -1334,6 +1463,9 @@ void snd_hda_codec_reset(struct hda_codec *codec) free_hda_cache(&codec->cmd_cache); init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info)); init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head)); + /* free only cur_pins so that init_pins + override_pins are restored */ + snd_array_free(&codec->cur_pins); + restore_pincfgs(codec); codec->num_pcms = 0; codec->pcm_info = NULL; codec->preset = NULL; @@ -2175,6 +2307,7 @@ static void hda_call_codec_resume(struct hda_codec *codec) hda_set_power_state(codec, codec->afg ? codec->afg : codec->mfg, AC_PWRST_D0); + restore_pincfgs(codec); /* restore all current pin configs */ hda_exec_init_verbs(codec); if (codec->patch_ops.resume) codec->patch_ops.resume(codec); diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 09a332ada0c6..6d01a8058f0a 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -778,11 +778,14 @@ struct hda_codec { unsigned short spdif_ctls; /* SPDIF control bits */ unsigned int spdif_in_enable; /* SPDIF input enable? */ hda_nid_t *slave_dig_outs; /* optional digital out slave widgets */ + struct snd_array init_pins; /* initial (BIOS) pin configurations */ + struct snd_array cur_pins; /* current pin configurations */ #ifdef CONFIG_SND_HDA_HWDEP struct snd_hwdep *hwdep; /* assigned hwdep device */ struct snd_array init_verbs; /* additional init verbs */ struct snd_array hints; /* additional hints */ + struct snd_array override_pins; /* default pin configs to override */ #endif /* misc flags */ @@ -855,6 +858,18 @@ void snd_hda_codec_resume_cache(struct hda_codec *codec); #define snd_hda_sequence_write_cache snd_hda_sequence_write #endif +/* the struct for codec->pin_configs */ +struct hda_pincfg { + hda_nid_t nid; + unsigned int cfg; +}; + +unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid); +int snd_hda_codec_set_pincfg(struct hda_codec *codec, hda_nid_t nid, + unsigned int cfg); +int snd_hda_add_pincfg(struct hda_codec *codec, struct snd_array *list, + hda_nid_t nid, unsigned int cfg); /* for hwdep */ + /* * Mixer */ diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 4ae51dcb81af..71039a6dec28 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -109,6 +109,7 @@ static void clear_hwdep_elements(struct hda_codec *codec) for (i = 0; i < codec->hints.used; i++, head++) kfree(*head); snd_array_free(&codec->hints); + snd_array_free(&codec->override_pins); } static void hwdep_free(struct snd_hwdep *hwdep) @@ -141,6 +142,7 @@ int /*__devinit*/ snd_hda_create_hwdep(struct hda_codec *codec) snd_array_init(&codec->init_verbs, sizeof(struct hda_verb), 32); snd_array_init(&codec->hints, sizeof(char *), 32); + snd_array_init(&codec->override_pins, sizeof(struct hda_pincfg), 16); return 0; } @@ -316,6 +318,67 @@ static ssize_t hints_store(struct device *dev, return count; } +static ssize_t pin_configs_show(struct hda_codec *codec, + struct snd_array *list, + char *buf) +{ + int i, len = 0; + for (i = 0; i < list->used; i++) { + struct hda_pincfg *pin = snd_array_elem(list, i); + len += sprintf(buf + len, "0x%02x 0x%08x\n", + pin->nid, pin->cfg); + } + return len; +} + +static ssize_t init_pin_configs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct snd_hwdep *hwdep = dev_get_drvdata(dev); + struct hda_codec *codec = hwdep->private_data; + return pin_configs_show(codec, &codec->init_pins, buf); +} + +static ssize_t override_pin_configs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct snd_hwdep *hwdep = dev_get_drvdata(dev); + struct hda_codec *codec = hwdep->private_data; + return pin_configs_show(codec, &codec->override_pins, buf); +} + +static ssize_t cur_pin_configs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct snd_hwdep *hwdep = dev_get_drvdata(dev); + struct hda_codec *codec = hwdep->private_data; + return pin_configs_show(codec, &codec->cur_pins, buf); +} + +#define MAX_PIN_CONFIGS 32 + +static ssize_t override_pin_configs_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct snd_hwdep *hwdep = dev_get_drvdata(dev); + struct hda_codec *codec = hwdep->private_data; + int nid, cfg; + int err; + + if (sscanf(buf, "%i %i", &nid, &cfg) != 2) + return -EINVAL; + if (!nid) + return -EINVAL; + err = snd_hda_add_pincfg(codec, &codec->override_pins, nid, cfg); + if (err < 0) + return err; + return count; +} + #define CODEC_ATTR_RW(type) \ __ATTR(type, 0644, type##_show, type##_store) #define CODEC_ATTR_RO(type) \ @@ -333,6 +396,9 @@ static struct device_attribute codec_attrs[] = { CODEC_ATTR_RW(modelname), CODEC_ATTR_WO(init_verbs), CODEC_ATTR_WO(hints), + CODEC_ATTR_RO(init_pin_configs), + CODEC_ATTR_RW(override_pin_configs), + CODEC_ATTR_RO(cur_pin_configs), CODEC_ATTR_WO(reconfig), CODEC_ATTR_WO(clear), }; -- cgit v1.2.3 From 0e8a21b59d48a63f45b3e6d2aca7fb91c5aec882 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 20 Feb 2009 14:13:06 +0100 Subject: ALSA: hda - Remove realtek codec-specific pin save/restore functions Now it's done in the common code. Also use the common access functions for pin defaults. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 78 ++----------------------------------------- 1 file changed, 3 insertions(+), 75 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 169b3837af52..d7f255e3b916 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -329,13 +329,6 @@ struct alc_spec { /* for PLL fix */ hda_nid_t pll_nid; unsigned int pll_coef_idx, pll_coef_bit; - -#ifdef SND_HDA_NEEDS_RESUME -#define ALC_MAX_PINS 16 - unsigned int num_pins; - hda_nid_t pin_nids[ALC_MAX_PINS]; - unsigned int pin_cfgs[ALC_MAX_PINS]; -#endif }; /* @@ -1009,8 +1002,7 @@ static void alc_subsystem_id(struct hda_codec *codec, nid = 0x1d; if (codec->vendor_id == 0x10ec0260) nid = 0x17; - ass = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + ass = snd_hda_codec_get_pincfg(codec, nid); if (!(ass & 1) && !(ass & 0x100000)) return; if ((ass >> 30) != 1) /* no physical connection */ @@ -1184,16 +1176,8 @@ static void alc_fix_pincfg(struct hda_codec *codec, return; cfg = pinfix[quirk->value]; - for (; cfg->nid; cfg++) { - int i; - u32 val = cfg->val; - for (i = 0; i < 4; i++) { - snd_hda_codec_write(codec, cfg->nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 + i, - val & 0xff); - val >>= 8; - } - } + for (; cfg->nid; cfg++) + snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val); } /* @@ -3215,61 +3199,13 @@ static void alc_free(struct hda_codec *codec) } #ifdef SND_HDA_NEEDS_RESUME -static void store_pin_configs(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - hda_nid_t nid, end_nid; - - end_nid = codec->start_nid + codec->num_nodes; - for (nid = codec->start_nid; nid < end_nid; nid++) { - unsigned int wid_caps = get_wcaps(codec, nid); - unsigned int wid_type = - (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; - if (wid_type != AC_WID_PIN) - continue; - if (spec->num_pins >= ARRAY_SIZE(spec->pin_nids)) - break; - spec->pin_nids[spec->num_pins] = nid; - spec->pin_cfgs[spec->num_pins] = - snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); - spec->num_pins++; - } -} - -static void resume_pin_configs(struct hda_codec *codec) -{ - struct alc_spec *spec = codec->spec; - int i; - - for (i = 0; i < spec->num_pins; i++) { - hda_nid_t pin_nid = spec->pin_nids[i]; - unsigned int pin_config = spec->pin_cfgs[i]; - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, - pin_config & 0x000000ff); - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, - (pin_config & 0x0000ff00) >> 8); - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, - (pin_config & 0x00ff0000) >> 16); - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, - pin_config >> 24); - } -} - static int alc_resume(struct hda_codec *codec) { - resume_pin_configs(codec); codec->patch_ops.init(codec); snd_hda_codec_resume_amp(codec); snd_hda_codec_resume_cache(codec); return 0; } -#else -#define store_pin_configs(codec) #endif /* @@ -4329,7 +4265,6 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux[0]; - store_pin_configs(codec); return 1; } @@ -5693,7 +5628,6 @@ static int alc260_parse_auto_config(struct hda_codec *codec) spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux[0]; - store_pin_configs(codec); return 1; } @@ -10688,7 +10622,6 @@ static int alc262_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - store_pin_configs(codec); return 1; } @@ -11861,7 +11794,6 @@ static int alc268_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - store_pin_configs(codec); return 1; } @@ -12774,7 +12706,6 @@ static int alc269_parse_auto_config(struct hda_codec *codec) if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); - store_pin_configs(codec); return 1; } @@ -13825,7 +13756,6 @@ static int alc861_parse_auto_config(struct hda_codec *codec) spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids); set_capture_mixer(spec); - store_pin_configs(codec); return 1; } @@ -14927,7 +14857,6 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - store_pin_configs(codec); return 1; } @@ -16737,7 +16666,6 @@ static int alc662_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - store_pin_configs(codec); return 1; } -- cgit v1.2.3 From 330ee9957910826a072c2ad5d4045182335f9963 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 20 Feb 2009 14:33:36 +0100 Subject: ALSA: hda - Remove IDT codec-specific pin save/restore functions Removed its own save/restore functions and replaced with the common code. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 255 +++++++++++------------------------------ 1 file changed, 65 insertions(+), 190 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d00a211a813b..da48d8c0b295 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -229,7 +229,6 @@ struct sigmatel_spec { /* pin widgets */ hda_nid_t *pin_nids; unsigned int num_pins; - unsigned int *pin_configs; /* codec specific stuff */ struct hda_verb *init; @@ -2272,101 +2271,19 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = { {} /* terminator */ }; -static int stac92xx_save_bios_config_regs(struct hda_codec *codec) +static void stac92xx_set_config_regs(struct hda_codec *codec, + unsigned int *pincfgs) { int i; struct sigmatel_spec *spec = codec->spec; - - kfree(spec->pin_configs); - spec->pin_configs = kcalloc(spec->num_pins, sizeof(*spec->pin_configs), - GFP_KERNEL); - if (!spec->pin_configs) - return -ENOMEM; - - for (i = 0; i < spec->num_pins; i++) { - hda_nid_t nid = spec->pin_nids[i]; - unsigned int pin_cfg; - - if (!nid) - continue; - pin_cfg = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0x00); - snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x bios pin config %8.8x\n", - nid, pin_cfg); - spec->pin_configs[i] = pin_cfg; - } - - return 0; -} -static void stac92xx_set_config_reg(struct hda_codec *codec, - hda_nid_t pin_nid, unsigned int pin_config) -{ - int i; - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, - pin_config & 0x000000ff); - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, - (pin_config & 0x0000ff00) >> 8); - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, - (pin_config & 0x00ff0000) >> 16); - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, - pin_config >> 24); - i = snd_hda_codec_read(codec, pin_nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, - 0x00); - snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x pin config %8.8x\n", - pin_nid, i); -} - -static void stac92xx_set_config_regs(struct hda_codec *codec) -{ - int i; - struct sigmatel_spec *spec = codec->spec; - - if (!spec->pin_configs) - return; + if (!pincfgs) + return; for (i = 0; i < spec->num_pins; i++) - if (spec->pin_nids[i] && spec->pin_configs[i]) - stac92xx_set_config_reg(codec, spec->pin_nids[i], - spec->pin_configs[i]); -} - -static int stac_save_pin_cfgs(struct hda_codec *codec, unsigned int *pins) -{ - struct sigmatel_spec *spec = codec->spec; - - if (!pins) - return stac92xx_save_bios_config_regs(codec); - - kfree(spec->pin_configs); - spec->pin_configs = kmemdup(pins, - spec->num_pins * sizeof(*pins), - GFP_KERNEL); - if (!spec->pin_configs) - return -ENOMEM; - - stac92xx_set_config_regs(codec); - return 0; -} - -static void stac_change_pin_config(struct hda_codec *codec, hda_nid_t nid, - unsigned int cfg) -{ - struct sigmatel_spec *spec = codec->spec; - int i; - - for (i = 0; i < spec->num_pins; i++) { - if (spec->pin_nids[i] == nid) { - spec->pin_configs[i] = cfg; - stac92xx_set_config_reg(codec, nid, cfg); - break; - } - } + if (spec->pin_nids[i] && pincfgs[i]) + snd_hda_codec_set_pincfg(codec, spec->pin_nids[i], + pincfgs[i]); } /* @@ -2853,8 +2770,7 @@ static hda_nid_t check_mic_out_switch(struct hda_codec *codec) mic_pin = AUTO_PIN_MIC; for (;;) { hda_nid_t nid = cfg->input_pins[mic_pin]; - def_conf = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = snd_hda_codec_get_pincfg(codec, nid); /* some laptops have an internal analog microphone * which can't be used as a output */ if (get_defcfg_connect(def_conf) != AC_JACK_PORT_FIXED) { @@ -3426,11 +3342,7 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, unsigned int wcaps; unsigned int def_conf; - def_conf = snd_hda_codec_read(codec, - spec->dmic_nids[i], - 0, - AC_VERB_GET_CONFIG_DEFAULT, - 0); + def_conf = snd_hda_codec_get_pincfg(codec, spec->dmic_nids[i]); if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) continue; @@ -3779,9 +3691,7 @@ static int stac9200_auto_create_lfe_ctls(struct hda_codec *codec, for (i = 0; i < spec->autocfg.line_outs && lfe_pin == 0x0; i++) { hda_nid_t pin = spec->autocfg.line_out_pins[i]; unsigned int defcfg; - defcfg = snd_hda_codec_read(codec, pin, 0, - AC_VERB_GET_CONFIG_DEFAULT, - 0x00); + defcfg = snd_hda_codec_get_pincfg(codec, pin); if (get_defcfg_device(defcfg) == AC_JACK_SPEAKER) { unsigned int wcaps = get_wcaps(codec, pin); wcaps &= (AC_WCAP_STEREO | AC_WCAP_OUT_AMP); @@ -3885,8 +3795,7 @@ static int stac92xx_add_jack(struct hda_codec *codec, #ifdef CONFIG_SND_JACK struct sigmatel_spec *spec = codec->spec; struct sigmatel_jack *jack; - int def_conf = snd_hda_codec_read(codec, nid, - 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + int def_conf = snd_hda_codec_get_pincfg(codec, nid); int connectivity = get_defcfg_connect(def_conf); char name[32]; @@ -4066,8 +3975,7 @@ static int stac92xx_init(struct hda_codec *codec) pinctl); } } - conf = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + conf = snd_hda_codec_get_pincfg(codec, nid); if (get_defcfg_connect(conf) != AC_JACK_PORT_FIXED) { enable_pin_detect(codec, nid, STAC_INSERT_EVENT); @@ -4108,8 +4016,7 @@ static int stac92xx_init(struct hda_codec *codec) stac_toggle_power_map(codec, nid, 1); continue; } - def_conf = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = snd_hda_codec_get_pincfg(codec, nid); def_conf = get_defcfg_connect(def_conf); /* skip any ports that don't have jacks since presence * detection is useless */ @@ -4163,7 +4070,6 @@ static void stac92xx_free(struct hda_codec *codec) if (! spec) return; - kfree(spec->pin_configs); stac92xx_free_jacks(codec); snd_array_free(&spec->events); @@ -4474,7 +4380,6 @@ static int stac92xx_resume(struct hda_codec *codec) { struct sigmatel_spec *spec = codec->spec; - stac92xx_set_config_regs(codec); stac92xx_init(codec); snd_hda_codec_resume_amp(codec); snd_hda_codec_resume_cache(codec); @@ -4523,16 +4428,11 @@ static int patch_stac9200(struct hda_codec *codec) spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS, stac9200_models, stac9200_cfg_tbl); - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9200, using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac9200_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } spec->multiout.max_channels = 2; spec->multiout.num_dacs = 1; @@ -4600,17 +4500,12 @@ static int patch_stac925x(struct hda_codec *codec) stac925x_models, stac925x_cfg_tbl); again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x," "using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac925x_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } spec->multiout.max_channels = 2; spec->multiout.num_dacs = 1; @@ -4688,17 +4583,12 @@ static int patch_stac92hd73xx(struct hda_codec *codec) stac92hd73xx_models, stac92hd73xx_cfg_tbl); again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for" " STAC92HD73XX, using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac92hd73xx_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } num_dacs = snd_hda_get_connections(codec, 0x0a, conn, STAC92HD73_DAC_COUNT + 2) - 1; @@ -4758,18 +4648,18 @@ again: spec->init = dell_m6_core_init; switch (spec->board_config) { case STAC_DELL_M6_AMIC: /* Analog Mics */ - stac92xx_set_config_reg(codec, 0x0b, 0x90A70170); + snd_hda_codec_set_pincfg(codec, 0x0b, 0x90A70170); spec->num_dmics = 0; spec->private_dimux.num_items = 1; break; case STAC_DELL_M6_DMIC: /* Digital Mics */ - stac92xx_set_config_reg(codec, 0x13, 0x90A60160); + snd_hda_codec_set_pincfg(codec, 0x13, 0x90A60160); spec->num_dmics = 1; spec->private_dimux.num_items = 2; break; case STAC_DELL_M6_BOTH: /* Both */ - stac92xx_set_config_reg(codec, 0x0b, 0x90A70170); - stac92xx_set_config_reg(codec, 0x13, 0x90A60160); + snd_hda_codec_set_pincfg(codec, 0x0b, 0x90A70170); + snd_hda_codec_set_pincfg(codec, 0x13, 0x90A60160); spec->num_dmics = 1; spec->private_dimux.num_items = 2; break; @@ -4865,17 +4755,12 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) stac92hd83xxx_models, stac92hd83xxx_cfg_tbl); again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for" " STAC92HD83XXX, using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac92hd83xxx_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } switch (codec->vendor_id) { case 0x111d7604: @@ -4945,6 +4830,16 @@ static struct hda_input_mux stac92hd71bxx_dmux_amixer = { } }; +/* get the pin connection (fixed, none, etc) */ +static unsigned int stac_get_defcfg_connect(struct hda_codec *codec, int idx) +{ + struct sigmatel_spec *spec = codec->spec; + unsigned int cfg; + + cfg = snd_hda_codec_get_pincfg(codec, spec->pin_nids[idx]); + return get_defcfg_connect(cfg); +} + static int stac92hd71bxx_connected_ports(struct hda_codec *codec, hda_nid_t *nids, int num_nids) { @@ -4958,7 +4853,7 @@ static int stac92hd71bxx_connected_ports(struct hda_codec *codec, break; if (idx >= spec->num_pins) break; - def_conf = get_defcfg_connect(spec->pin_configs[idx]); + def_conf = stac_get_defcfg_connect(codec, idx); if (def_conf == AC_JACK_PORT_NONE) break; } @@ -4978,13 +4873,13 @@ static int stac92hd71bxx_connected_smuxes(struct hda_codec *codec, return 0; /* dig1pin case */ - if (get_defcfg_connect(spec->pin_configs[idx+1]) != AC_JACK_PORT_NONE) + if (stac_get_defcfg_connect(codec, idx + 1) != AC_JACK_PORT_NONE) return 2; /* dig0pin + dig2pin case */ - if (get_defcfg_connect(spec->pin_configs[idx+2]) != AC_JACK_PORT_NONE) + if (stac_get_defcfg_connect(codec, idx + 2) != AC_JACK_PORT_NONE) return 2; - if (get_defcfg_connect(spec->pin_configs[idx]) != AC_JACK_PORT_NONE) + if (stac_get_defcfg_connect(codec, idx) != AC_JACK_PORT_NONE) return 1; else return 0; @@ -5023,17 +4918,12 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) stac92hd71bxx_models, stac92hd71bxx_cfg_tbl); again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for" " STAC92HD71BXX, using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac92hd71bxx_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } if (spec->board_config > STAC_92HD71BXX_REF) { /* GPIO0 = EAPD */ @@ -5097,8 +4987,8 @@ again: /* disable VSW */ spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF]; unmute_init++; - stac_change_pin_config(codec, 0x0f, 0x40f000f0); - stac_change_pin_config(codec, 0x19, 0x40f000f3); + snd_hda_codec_set_pincfg(codec, 0x0f, 0x40f000f0); + snd_hda_codec_set_pincfg(codec, 0x19, 0x40f000f3); stac92hd71bxx_dmic_nids[STAC92HD71BXX_NUM_DMICS - 1] = 0; spec->num_dmics = stac92hd71bxx_connected_ports(codec, stac92hd71bxx_dmic_nids, @@ -5147,7 +5037,7 @@ again: switch (spec->board_config) { case STAC_HP_M4: /* enable internal microphone */ - stac_change_pin_config(codec, 0x0e, 0x01813040); + snd_hda_codec_set_pincfg(codec, 0x0e, 0x01813040); stac92xx_auto_set_pinctl(codec, 0x0e, AC_PINCTL_IN_EN | AC_PINCTL_VREF_80); /* fallthru */ @@ -5163,7 +5053,7 @@ again: spec->num_dmuxes = 0; break; case STAC_HP_DV5: - stac_change_pin_config(codec, 0x0d, 0x90170010); + snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010); stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN); break; }; @@ -5247,17 +5137,12 @@ static int patch_stac922x(struct hda_codec *codec) } again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC922x, " "using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac922x_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } spec->adc_nids = stac922x_adc_nids; spec->mux_nids = stac922x_mux_nids; @@ -5315,17 +5200,12 @@ static int patch_stac927x(struct hda_codec *codec) stac927x_models, stac927x_cfg_tbl); again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for" "STAC927x, using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac927x_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } spec->digbeep_nid = 0x23; spec->adc_nids = stac927x_adc_nids; @@ -5354,15 +5234,15 @@ static int patch_stac927x(struct hda_codec *codec) case 0x10280209: case 0x1028022e: /* correct the device field to SPDIF out */ - stac_change_pin_config(codec, 0x21, 0x01442070); + snd_hda_codec_set_pincfg(codec, 0x21, 0x01442070); break; }; /* configure the analog microphone on some laptops */ - stac_change_pin_config(codec, 0x0c, 0x90a79130); + snd_hda_codec_set_pincfg(codec, 0x0c, 0x90a79130); /* correct the front output jack as a hp out */ - stac_change_pin_config(codec, 0x0f, 0x0227011f); + snd_hda_codec_set_pincfg(codec, 0x0f, 0x0227011f); /* correct the front input jack as a mic */ - stac_change_pin_config(codec, 0x0e, 0x02a79130); + snd_hda_codec_set_pincfg(codec, 0x0e, 0x02a79130); /* fallthru */ case STAC_DELL_3ST: /* GPIO2 High = Enable EAPD */ @@ -5447,16 +5327,11 @@ static int patch_stac9205(struct hda_codec *codec) stac9205_models, stac9205_cfg_tbl); again: - if (spec->board_config < 0) { + if (spec->board_config < 0) snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9205, using BIOS defaults\n"); - err = stac92xx_save_bios_config_regs(codec); - } else - err = stac_save_pin_cfgs(codec, + else + stac92xx_set_config_regs(codec, stac9205_brd_tbl[spec->board_config]); - if (err < 0) { - stac92xx_free(codec); - return err; - } spec->digbeep_nid = 0x23; spec->adc_nids = stac9205_adc_nids; @@ -5484,8 +5359,8 @@ static int patch_stac9205(struct hda_codec *codec) switch (spec->board_config){ case STAC_9205_DELL_M43: /* Enable SPDIF in/out */ - stac_change_pin_config(codec, 0x1f, 0x01441030); - stac_change_pin_config(codec, 0x20, 0x1c410030); + snd_hda_codec_set_pincfg(codec, 0x1f, 0x01441030); + snd_hda_codec_set_pincfg(codec, 0x20, 0x1c410030); /* Enable unsol response for GPIO4/Dock HP connection */ err = stac_add_event(spec, codec->afg, STAC_VREF_EVENT, 0x01); -- cgit v1.2.3 From 2f334f92cfb44d17b9f24a43f8998cca03f9a3dd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 20 Feb 2009 14:37:42 +0100 Subject: ALSA: hda - Remove codec-specific pin save/restore functions Replace the accessor to pin defaults with the common code for caching. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 3 +-- sound/pci/hda/patch_cmedia.c | 12 ++++++------ sound/pci/hda/patch_via.c | 7 ++----- 3 files changed, 9 insertions(+), 13 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 2c58d7b05aba..53d0edaf04c7 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1047,8 +1047,7 @@ static struct hda_amp_list ad1986a_loopbacks[] = { static int is_jack_available(struct hda_codec *codec, hda_nid_t nid) { - unsigned int conf = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + unsigned int conf = snd_hda_codec_get_pincfg(codec, nid); return get_defcfg_connect(conf) != AC_JACK_PORT_NONE; } diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index f3ebe837f2d5..c921264bbd71 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -680,13 +680,13 @@ static int patch_cmi9880(struct hda_codec *codec) struct auto_pin_cfg cfg; /* collect pin default configuration */ - port_e = snd_hda_codec_read(codec, 0x0f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); - port_f = snd_hda_codec_read(codec, 0x10, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + port_e = snd_hda_codec_get_pincfg(codec, 0x0f); + port_f = snd_hda_codec_get_pincfg(codec, 0x10); spec->front_panel = 1; if (get_defcfg_connect(port_e) == AC_JACK_PORT_NONE || get_defcfg_connect(port_f) == AC_JACK_PORT_NONE) { - port_g = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); - port_h = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + port_g = snd_hda_codec_get_pincfg(codec, 0x1f); + port_h = snd_hda_codec_get_pincfg(codec, 0x20); spec->channel_modes = cmi9880_channel_modes; /* no front panel */ if (get_defcfg_connect(port_g) == AC_JACK_PORT_NONE || @@ -703,8 +703,8 @@ static int patch_cmi9880(struct hda_codec *codec) spec->multiout.max_channels = cmi9880_channel_modes[0].channels; } else { spec->input_mux = &cmi9880_basic_mux; - port_spdifi = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); - port_spdifo = snd_hda_codec_read(codec, 0x12, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + port_spdifi = snd_hda_codec_get_pincfg(codec, 0x13); + port_spdifo = snd_hda_codec_get_pincfg(codec, 0x12); if (get_defcfg_connect(port_spdifo) != AC_JACK_PORT_NONE) spec->multiout.dig_out_nid = CMI_DIG_OUT_NID; if (get_defcfg_connect(port_spdifi) != AC_JACK_PORT_NONE) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 639b2ff510a6..b25a5cc637d6 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -1308,16 +1308,13 @@ static void vt1708_set_pinconfig_connect(struct hda_codec *codec, hda_nid_t nid) unsigned int def_conf; unsigned char seqassoc; - def_conf = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = snd_hda_codec_get_pincfg(codec, nid); seqassoc = (unsigned char) get_defcfg_association(def_conf); seqassoc = (seqassoc << 4) | get_defcfg_sequence(def_conf); if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) { if (seqassoc == 0xff) { def_conf = def_conf & (~(AC_JACK_PORT_BOTH << 30)); - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, - def_conf >> 24); + snd_hda_codec_set_pincfg(codec, nid, def_conf); } } -- cgit v1.2.3 From f1085c4f319f1e43c95718045a235f276cc4b615 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 20 Feb 2009 14:50:35 +0100 Subject: ALSA: hda - Update documentation for pincfg sysfs entries Added the brief descriptions of new sysfs entries for pint default config values. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 99f7fbbe3e67..9c51e104546f 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -365,10 +365,22 @@ modelname:: to this file. init_verbs:: The extra verbs to execute at initialization. You can add a verb by - writing to this file. Pass tree numbers, nid, verb and parameter. + writing to this file. Pass three numbers: nid, verb and parameter. hints:: Shows hint strings for codec parsers for any use. Right now it's not used. +init_pin_configs:: + Shows the initial pin default config values set by BIOS. +override_pin_configs:: + Shows the pin default config values to override the BIOS setup. + Writing this (with two numbers, NID and value) appends the new + value. The given will be used instead of the initial BIOS value at + the next reconfiguration time. +cur_pin_configs:: + Shows the pin default values set by the codec parser explicitly. + This doesn't show all pin values but only the changed values by + the parser. That is, if the parser doesn't change the pin default + config values by itself, this will contain nothing. reconfig:: Triggers the codec re-configuration. When any value is written to this file, the driver re-initialize and parses the codec tree -- cgit v1.2.3 From 9c3c133b1ed6e6d01bfabb6de29bf3d0f0886354 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Sun, 22 Feb 2009 12:03:56 +0800 Subject: hwrng: timeriomem - New driver Some hardware platforms, the TS-7800[1] is one for example, can supply the kernel with an entropy source, albeit a slow one for TS-7800 users, by just reading a particular IO address. This source must not be read above a certain rate otherwise the quality suffers. The driver is then hooked into by calling platform_device_(register|add|del) passing a structure similar to: ------ static struct timeriomem_rng_data ts78xx_ts_rng_data = { .address = (u32 *__iomem) TS_RNG, .period = 1000000, /* one second */ }; static struct platform_device ts78xx_ts_rng_device = { .name = "timeriomem_rng", .id = -1, .dev = { .platform_data = &ts78xx_ts_rng_data, }, .num_resources = 0, }; ------ [1] http://www.embeddedarm.com/products/board-detail.php?product=TS-7800 Signed-off-by: Alexander Clouter Signed-off-by: Herbert Xu --- drivers/char/hw_random/Kconfig | 14 +++ drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/timeriomem-rng.c | 151 ++++++++++++++++++++++++++++++++ include/linux/timeriomem-rng.h | 21 +++++ 4 files changed, 187 insertions(+) create mode 100644 drivers/char/hw_random/timeriomem-rng.c create mode 100644 include/linux/timeriomem-rng.h diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 8822eca58ffa..e86dd425a70f 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -20,6 +20,20 @@ config HW_RANDOM If unsure, say Y. +config HW_RANDOM_TIMERIOMEM + tristate "Timer IOMEM HW Random Number Generator support" + depends on HW_RANDOM + ---help--- + This driver provides kernel-side support for a generic Random + Number Generator used by reading a 'dumb' iomem address that + is to be read no faster than, for example, once a second; + the default FPGA bitstream on the TS-7800 has such functionality. + + To compile this driver as a module, choose M here: the + module will be called timeriomem-rng. + + If unsure, say Y. + config HW_RANDOM_INTEL tristate "Intel HW Random Number Generator support" depends on HW_RANDOM && (X86 || IA64) && PCI diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index b6effb7522c2..e81d21a5f28f 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_HW_RANDOM) += rng-core.o rng-core-y := core.o +obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o diff --git a/drivers/char/hw_random/timeriomem-rng.c b/drivers/char/hw_random/timeriomem-rng.c new file mode 100644 index 000000000000..10ad41be5897 --- /dev/null +++ b/drivers/char/hw_random/timeriomem-rng.c @@ -0,0 +1,151 @@ +/* + * drivers/char/hw_random/timeriomem-rng.c + * + * Copyright (C) 2009 Alexander Clouter + * + * Derived from drivers/char/hw_random/omap-rng.c + * Copyright 2005 (c) MontaVista Software, Inc. + * Author: Deepak Saxena + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Overview: + * This driver is useful for platforms that have an IO range that provides + * periodic random data from a single IO memory address. All the platform + * has to do is provide the address and 'wait time' that new data becomes + * available. + * + * TODO: add support for reading sizes other than 32bits and masking + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct timeriomem_rng_data *timeriomem_rng_data; + +static void timeriomem_rng_trigger(unsigned long); +static DEFINE_TIMER(timeriomem_rng_timer, timeriomem_rng_trigger, 0, 0); + +/* + * have data return 1, however return 0 if we have nothing + */ +static int timeriomem_rng_data_present(struct hwrng *rng, int wait) +{ + if (rng->priv == 0) + return 1; + + if (!wait || timeriomem_rng_data->present) + return timeriomem_rng_data->present; + + wait_for_completion(&timeriomem_rng_data->completion); + + return 1; +} + +static int timeriomem_rng_data_read(struct hwrng *rng, u32 *data) +{ + unsigned long cur; + s32 delay; + + *data = readl(timeriomem_rng_data->address); + + if (rng->priv != 0) { + cur = jiffies; + + delay = cur - timeriomem_rng_timer.expires; + delay = rng->priv - (delay % rng->priv); + + timeriomem_rng_timer.expires = cur + delay; + timeriomem_rng_data->present = 0; + + init_completion(&timeriomem_rng_data->completion); + add_timer(&timeriomem_rng_timer); + } + + return 4; +} + +static void timeriomem_rng_trigger(unsigned long dummy) +{ + timeriomem_rng_data->present = 1; + complete(&timeriomem_rng_data->completion); +} + +static struct hwrng timeriomem_rng_ops = { + .name = "timeriomem", + .data_present = timeriomem_rng_data_present, + .data_read = timeriomem_rng_data_read, + .priv = 0, +}; + +static int __init timeriomem_rng_probe(struct platform_device *pdev) +{ + int ret; + + timeriomem_rng_data = pdev->dev.platform_data; + + if (timeriomem_rng_data->period != 0 + && usecs_to_jiffies(timeriomem_rng_data->period) > 0) { + timeriomem_rng_timer.expires = jiffies; + + timeriomem_rng_ops.priv = usecs_to_jiffies( + timeriomem_rng_data->period); + } + timeriomem_rng_data->present = 1; + + ret = hwrng_register(&timeriomem_rng_ops); + if (ret) { + dev_err(&pdev->dev, "problem registering\n"); + return ret; + } + + dev_info(&pdev->dev, "32bits from 0x%p @ %dus\n", + timeriomem_rng_data->address, + timeriomem_rng_data->period); + + return 0; +} + +static int __devexit timeriomem_rng_remove(struct platform_device *pdev) +{ + del_timer_sync(&timeriomem_rng_timer); + hwrng_unregister(&timeriomem_rng_ops); + + return 0; +} + +static struct platform_driver timeriomem_rng_driver = { + .driver = { + .name = "timeriomem_rng", + .owner = THIS_MODULE, + }, + .probe = timeriomem_rng_probe, + .remove = __devexit_p(timeriomem_rng_remove), +}; + +static int __init timeriomem_rng_init(void) +{ + return platform_driver_register(&timeriomem_rng_driver); +} + +static void __exit timeriomem_rng_exit(void) +{ + platform_driver_unregister(&timeriomem_rng_driver); +} + +module_init(timeriomem_rng_init); +module_exit(timeriomem_rng_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Clouter "); +MODULE_DESCRIPTION("Timer IOMEM H/W RNG driver"); diff --git a/include/linux/timeriomem-rng.h b/include/linux/timeriomem-rng.h new file mode 100644 index 000000000000..dd253177f65f --- /dev/null +++ b/include/linux/timeriomem-rng.h @@ -0,0 +1,21 @@ +/* + * linux/include/linux/timeriomem-rng.h + * + * Copyright (c) 2009 Alexander Clouter + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +struct timeriomem_rng_data { + struct completion completion; + unsigned int present:1; + + u32 __iomem *address; + + /* measures in usecs */ + unsigned int period; +}; -- cgit v1.2.3 From eeb1080b29a0fa00e426ba77eb96f3a157b335ab Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 22 Feb 2009 14:19:23 +0000 Subject: ASoC: Report I/O errors from WM8753 reset Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 31ff337f8225..180ec94ad8ae 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1561,7 +1561,11 @@ static int wm8753_init(struct snd_soc_device *socdev) wm8753_set_dai_mode(codec, 0); - wm8753_reset(codec); + ret = wm8753_reset(codec); + if (ret < 0) { + printk(KERN_ERR "wm8753: failed to reset device\n"); + return ret; + } /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); -- cgit v1.2.3 From 93e051d2771e6bf70e86b8265bfbf296a457d044 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 22 Feb 2009 14:24:00 +0000 Subject: ASoC: Only unregister drivers we registered for WM8753 Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 180ec94ad8ae..93c22c4f0826 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1845,6 +1845,7 @@ static int wm8753_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->card->codec; + struct wm8753_setup_data *setup = socdev->codec_data; if (codec->control_data) wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF); @@ -1852,11 +1853,14 @@ static int wm8753_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - i2c_unregister_device(codec->control_data); - i2c_del_driver(&wm8753_i2c_driver); + if (setup->i2c_address) { + i2c_unregister_device(codec->control_data); + i2c_del_driver(&wm8753_i2c_driver); + } #endif #if defined(CONFIG_SPI_MASTER) - spi_unregister_driver(&wm8753_spi_driver); + if (setup->spi) + spi_unregister_driver(&wm8753_spi_driver); #endif kfree(codec->private_data); kfree(codec); -- cgit v1.2.3 From 1581e7ddbdd97443a134e1a0cc9d81256baf77a4 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sat, 21 Feb 2009 20:40:50 +0900 Subject: TOMOYO: Do not call tomoyo_realpath_init unless registered. tomoyo_realpath_init() is unconditionally called by security_initcall(). But nobody will use realpath related functions if TOMOYO is not registered. So, let tomoyo_init() call tomoyo_realpath_init(). This patch saves 4KB of memory allocation if TOMOYO is not registered. Signed-off-by: Kentaro Takeda Signed-off-by: Tetsuo Handa Signed-off-by: Toshiharu Harada Signed-off-by: James Morris --- security/tomoyo/realpath.c | 7 +------ security/tomoyo/realpath.h | 3 +++ security/tomoyo/tomoyo.c | 1 + 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 5fd48d23a217..d47f16b844b2 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -371,10 +371,8 @@ const struct tomoyo_path_info *tomoyo_save_name(const char *name) /** * tomoyo_realpath_init - Initialize realpath related code. - * - * Returns 0. */ -static int __init tomoyo_realpath_init(void) +void __init tomoyo_realpath_init(void) { int i; @@ -388,11 +386,8 @@ static int __init tomoyo_realpath_init(void) if (tomoyo_find_domain(TOMOYO_ROOT_NAME) != &tomoyo_kernel_domain) panic("Can't register tomoyo_kernel_domain"); up_read(&tomoyo_domain_list_lock); - return 0; } -security_initcall(tomoyo_realpath_init); - /* Memory allocated for temporary purpose. */ static atomic_t tomoyo_dynamic_memory_size; diff --git a/security/tomoyo/realpath.h b/security/tomoyo/realpath.h index 0ea541fcb53c..7ec9fc9cbc07 100644 --- a/security/tomoyo/realpath.h +++ b/security/tomoyo/realpath.h @@ -60,4 +60,7 @@ int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head); /* Set memory quota. */ int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head); +/* Initialize realpath related code. */ +void __init tomoyo_realpath_init(void); + #endif /* !defined(_SECURITY_TOMOYO_REALPATH_H) */ diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index cc599b36a3a8..3eeeae12c4dc 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -287,6 +287,7 @@ static int __init tomoyo_init(void) panic("Failure registering TOMOYO Linux"); printk(KERN_INFO "TOMOYO Linux initialized\n"); cred->security = &tomoyo_kernel_domain; + tomoyo_realpath_init(); return 0; } -- cgit v1.2.3 From be38e0fd5f90a91d09e0a85ffb294b70a7be6259 Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Fri, 20 Feb 2009 14:28:29 -0800 Subject: integrity: ima iint radix_tree_lookup locking fix Based on Andrew Morton's comments: - add missing locks around radix_tree_lookup in ima_iint_insert() Signed-off-by: Mimi Zohar Cc: James Morris Signed-off-by: Andrew Morton Signed-off-by: James Morris --- security/integrity/ima/ima_iint.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index 1f035e8d29c7..ec79f1ee992c 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -73,8 +73,10 @@ out: if (rc < 0) { kmem_cache_free(iint_cache, iint); if (rc == -EEXIST) { + spin_lock(&ima_iint_lock); iint = radix_tree_lookup(&ima_iint_store, (unsigned long)inode); + spin_unlock(&ima_iint_lock); } else iint = NULL; } -- cgit v1.2.3 From cc95948972576c3efa43c9ed05b4a265805a4c54 Mon Sep 17 00:00:00 2001 From: Michael Schwingen Date: Sun, 22 Feb 2009 18:58:45 +0100 Subject: ALSA: hda - add support for "Maxdata Favorit 100XS" (Intel HDA/ALC260) Signed-off-by: Michael Schwingen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 130 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 169b3837af52..abddabc1efa8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -78,6 +78,7 @@ enum { ALC260_ACER, ALC260_WILL, ALC260_REPLACER_672V, + ALC260_FAVORIT100, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif @@ -4537,6 +4538,26 @@ static struct hda_input_mux alc260_acer_capture_sources[2] = { }, }, }; + +/* Maxdata Favorit 100XS */ +static struct hda_input_mux alc260_favorit100_capture_sources[2] = { + { + .num_items = 2, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + }, + }, + { + .num_items = 3, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + { "Mixer", 0x5 }, + }, + }, +}; + /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -4817,6 +4838,18 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = { { } /* end */ }; +/* Maxdata Favorit 100XS: one output and one input (0x12) jack + */ +static struct snd_kcontrol_new alc260_favorit100_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + { } /* end */ +}; + /* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12, * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17. */ @@ -5188,6 +5221,89 @@ static struct hda_verb alc260_acer_init_verbs[] = { { } }; +/* Initialisation sequence for Maxdata Favorit 100XS + * (adapted from Acer init verbs). + */ +static struct hda_verb alc260_favorit100_init_verbs[] = { + /* GPIO 0 enables the output jack. + * Turn this on and rely on the standard mute + * methods whenever the user wants to turn these outputs off. + */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + /* Line/Mic input jack is connected to Mic1 pin */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + /* Ensure all other unused pins are disabled and muted. */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum + * bus when acting as outputs. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute Line-out pin widget amp left and right + * (no equiv mixer ctrl) + */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Mic1 and Line1 pin widget input buffers since they start as + * inputs. If the pin mode is changed by the user the pin mode control + * will take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - mic + * (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do similar with the second ADC: mute capture input amp and + * set ADC connection to mic to match ALSA's default state. + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + static struct hda_verb alc260_will_verbs[] = { {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00}, @@ -5730,6 +5846,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { [ALC260_ACER] = "acer", [ALC260_WILL] = "will", [ALC260_REPLACER_672V] = "replacer", + [ALC260_FAVORIT100] = "favorit100", #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = "test", #endif @@ -5739,6 +5856,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER), SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), + SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), @@ -5840,6 +5958,18 @@ static struct alc_config_preset alc260_presets[] = { .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources), .input_mux = alc260_acer_capture_sources, }, + [ALC260_FAVORIT100] = { + .mixers = { alc260_favorit100_mixer }, + .init_verbs = { alc260_favorit100_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources), + .input_mux = alc260_favorit100_capture_sources, + }, [ALC260_WILL] = { .mixers = { alc260_will_mixer }, .init_verbs = { alc260_init_verbs, alc260_will_verbs }, -- cgit v1.2.3 From ce71bfd1aa6d6a4069929eeceed254e13400ddf4 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Sun, 22 Feb 2009 20:33:41 +0100 Subject: ALSA: ALS4000, slight mixer improvements - add 8kHz / 20 kHz low-pass filter switch control - add ALS4000 Mono capture route control - add annotations to specs pages - improve ALS4000 PM saved regs selection (remove SB dummy register, add missing ones) - add some missing ALS4000 register defines - constify two variables Signed-off-by: Andreas Mohr Signed-off-by: Takashi Iwai --- include/sound/sb.h | 4 +- sound/isa/sb/sb_mixer.c | 156 ++++++++++++++++++++++++++++++++++++------------ 2 files changed, 121 insertions(+), 39 deletions(-) diff --git a/include/sound/sb.h b/include/sound/sb.h index 85f93c5fe1e4..4e62ee1e4115 100644 --- a/include/sound/sb.h +++ b/include/sound/sb.h @@ -249,6 +249,7 @@ struct snd_sb { #define SB_ALS4000_3D_AUTO_MUTE 0x52 #define SB_ALS4000_ANALOG_BLOCK_CTRL 0x53 #define SB_ALS4000_3D_DELAYLINE_PATTERN 0x54 +#define SB_ALS4000_CR3_CONFIGURATION 0xc3 /* bit 7 is Digital Loop Enable */ #define SB_ALS4000_QSOUND 0xdb /* IRQ setting bitmap */ @@ -330,7 +331,8 @@ enum { SB_MIX_DOUBLE, SB_MIX_INPUT_SW, SB_MIX_CAPTURE_PRO, - SB_MIX_CAPTURE_DT019X + SB_MIX_CAPTURE_DT019X, + SB_MIX_MONO_CAPTURE_ALS4K }; #define SB_MIXVAL_DOUBLE(left_reg, right_reg, left_shift, right_shift, mask) \ diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c index 406a431af91e..475220bbcc96 100644 --- a/sound/isa/sb/sb_mixer.c +++ b/sound/isa/sb/sb_mixer.c @@ -182,7 +182,7 @@ static int snd_sbmixer_put_double(struct snd_kcontrol *kcontrol, struct snd_ctl_ static int snd_dt019x_input_sw_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { - static char *texts[5] = { + static const char *texts[5] = { "CD", "Mic", "Line", "Synth", "Master" }; @@ -268,13 +268,74 @@ static int snd_dt019x_input_sw_put(struct snd_kcontrol *kcontrol, struct snd_ctl return change; } +/* + * ALS4000 mono recording control switch + */ + +static int snd_als4k_mono_capture_route_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static const char *texts[3] = { + "L chan only", "R chan only", "L ch/2 + R ch/2" + }; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 3; + if (uinfo->value.enumerated.item > 2) + uinfo->value.enumerated.item = 2; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int snd_als4k_mono_capture_route_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_sb *sb = snd_kcontrol_chip(kcontrol); + unsigned long flags; + unsigned char oval; + + spin_lock_irqsave(&sb->mixer_lock, flags); + oval = snd_sbmixer_read(sb, SB_ALS4000_MONO_IO_CTRL); + spin_unlock_irqrestore(&sb->mixer_lock, flags); + oval >>= 6; + if (oval > 2) + oval = 2; + + ucontrol->value.enumerated.item[0] = oval; + return 0; +} + +static int snd_als4k_mono_capture_route_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_sb *sb = snd_kcontrol_chip(kcontrol); + unsigned long flags; + int change; + unsigned char nval, oval; + + if (ucontrol->value.enumerated.item[0] > 2) + return -EINVAL; + spin_lock_irqsave(&sb->mixer_lock, flags); + oval = snd_sbmixer_read(sb, SB_ALS4000_MONO_IO_CTRL); + + nval = (oval & ~(3 << 6)) + | (ucontrol->value.enumerated.item[0] << 6); + change = nval != oval; + if (change) + snd_sbmixer_write(sb, SB_ALS4000_MONO_IO_CTRL, nval); + spin_unlock_irqrestore(&sb->mixer_lock, flags); + return change; +} + /* * SBPRO input multiplexer */ static int snd_sb8mixer_info_mux(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { - static char *texts[3] = { + static const char *texts[3] = { "Mic", "CD", "Line" }; @@ -442,6 +503,12 @@ int snd_sbmixer_add_ctl(struct snd_sb *chip, const char *name, int index, int ty .get = snd_dt019x_input_sw_get, .put = snd_dt019x_input_sw_put, }, + [SB_MIX_MONO_CAPTURE_ALS4K] = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = snd_als4k_mono_capture_route_info, + .get = snd_als4k_mono_capture_route_get, + .put = snd_als4k_mono_capture_route_put, + }, }; struct snd_kcontrol *ctl; int err; @@ -636,6 +703,8 @@ static struct sbmix_elem snd_dt019x_ctl_capture_source = }; static struct sbmix_elem *snd_dt019x_controls[] = { + /* ALS4000 below has some parts which we might be lacking, + * e.g. snd_als4000_ctl_mono_playback_switch - check it! */ &snd_dt019x_ctl_master_play_vol, &snd_dt019x_ctl_pcm_play_vol, &snd_dt019x_ctl_synth_play_vol, @@ -666,18 +735,21 @@ static unsigned char snd_dt019x_init_values[][2] = { /* * ALS4000 specific mixer elements */ -/* FIXME: SB_ALS4000_MONO_IO_CTRL needs output select ctrl! */ static struct sbmix_elem snd_als4000_ctl_master_mono_playback_switch = SB_SINGLE("Master Mono Playback Switch", SB_ALS4000_MONO_IO_CTRL, 5, 1); -static struct sbmix_elem snd_als4000_ctl_master_mono_capture_route = - SB_SINGLE("Master Mono Capture Route", SB_ALS4000_MONO_IO_CTRL, 6, 0x03); -/* FIXME: mono playback switch also available on DT019X? */ +static struct sbmix_elem snd_als4k_ctl_master_mono_capture_route = { + .name = "Master Mono Capture Route", + .type = SB_MIX_MONO_CAPTURE_ALS4K + }; static struct sbmix_elem snd_als4000_ctl_mono_playback_switch = SB_SINGLE("Mono Playback Switch", SB_DT019X_OUTPUT_SW2, 0, 1); static struct sbmix_elem snd_als4000_ctl_mic_20db_boost = SB_SINGLE("Mic Boost (+20dB)", SB_ALS4000_MIC_IN_GAIN, 0, 0x03); -static struct sbmix_elem snd_als4000_ctl_mixer_loopback = - SB_SINGLE("Analog Loopback", SB_ALS4000_MIC_IN_GAIN, 7, 0x01); +static struct sbmix_elem snd_als4000_ctl_mixer_analog_loopback = + SB_SINGLE("Analog Loopback Switch", SB_ALS4000_MIC_IN_GAIN, 7, 0x01); +static struct sbmix_elem snd_als4000_ctl_mixer_digital_loopback = + SB_SINGLE("Digital Loopback Switch", + SB_ALS4000_CR3_CONFIGURATION, 7, 0x01); /* FIXME: functionality of 3D controls might be swapped, I didn't find * a description of how to identify what is supposed to be what */ static struct sbmix_elem snd_als4000_3d_control_switch = @@ -694,6 +766,9 @@ static struct sbmix_elem snd_als4000_3d_control_delay = SB_SINGLE("3D Control - Wide", SB_ALS4000_3D_TIME_DELAY, 0, 0x0f); static struct sbmix_elem snd_als4000_3d_control_poweroff_switch = SB_SINGLE("3D PowerOff Switch", SB_ALS4000_3D_TIME_DELAY, 4, 0x01); +static struct sbmix_elem snd_als4000_ctl_3db_freq_control_switch = + SB_SINGLE("Master Playback 8kHz / 20kHz LPF Switch", + SB_ALS4000_FMDAC, 5, 0x01); #ifdef NOT_AVAILABLE static struct sbmix_elem snd_als4000_ctl_fmdac = SB_SINGLE("FMDAC Switch (Option ?)", SB_ALS4000_FMDAC, 0, 0x01); @@ -702,35 +777,37 @@ static struct sbmix_elem snd_als4000_ctl_qsound = #endif static struct sbmix_elem *snd_als4000_controls[] = { - &snd_sb16_ctl_master_play_vol, - &snd_dt019x_ctl_pcm_play_switch, - &snd_sb16_ctl_pcm_play_vol, - &snd_sb16_ctl_synth_capture_route, - &snd_dt019x_ctl_synth_play_switch, - &snd_sb16_ctl_synth_play_vol, - &snd_sb16_ctl_cd_capture_route, - &snd_sb16_ctl_cd_play_switch, - &snd_sb16_ctl_cd_play_vol, - &snd_sb16_ctl_line_capture_route, - &snd_sb16_ctl_line_play_switch, - &snd_sb16_ctl_line_play_vol, - &snd_sb16_ctl_mic_capture_route, - &snd_als4000_ctl_mic_20db_boost, - &snd_sb16_ctl_auto_mic_gain, - &snd_sb16_ctl_mic_play_switch, - &snd_sb16_ctl_mic_play_vol, - &snd_sb16_ctl_pc_speaker_vol, - &snd_sb16_ctl_capture_vol, - &snd_sb16_ctl_play_vol, - &snd_als4000_ctl_master_mono_playback_switch, - &snd_als4000_ctl_master_mono_capture_route, - &snd_als4000_ctl_mono_playback_switch, - &snd_als4000_ctl_mixer_loopback, - &snd_als4000_3d_control_switch, - &snd_als4000_3d_control_ratio, - &snd_als4000_3d_control_freq, - &snd_als4000_3d_control_delay, - &snd_als4000_3d_control_poweroff_switch, + /* ALS4000a.PDF regs page */ + &snd_sb16_ctl_master_play_vol, /* MX30/31 12 */ + &snd_dt019x_ctl_pcm_play_switch, /* MX4C 16 */ + &snd_sb16_ctl_pcm_play_vol, /* MX32/33 12 */ + &snd_sb16_ctl_synth_capture_route, /* MX3D/3E 14 */ + &snd_dt019x_ctl_synth_play_switch, /* MX4C 16 */ + &snd_sb16_ctl_synth_play_vol, /* MX34/35 12/13 */ + &snd_sb16_ctl_cd_capture_route, /* MX3D/3E 14 */ + &snd_sb16_ctl_cd_play_switch, /* MX3C 14 */ + &snd_sb16_ctl_cd_play_vol, /* MX36/37 13 */ + &snd_sb16_ctl_line_capture_route, /* MX3D/3E 14 */ + &snd_sb16_ctl_line_play_switch, /* MX3C 14 */ + &snd_sb16_ctl_line_play_vol, /* MX38/39 13 */ + &snd_sb16_ctl_mic_capture_route, /* MX3D/3E 14 */ + &snd_als4000_ctl_mic_20db_boost, /* MX4D 16 */ + &snd_sb16_ctl_mic_play_switch, /* MX3C 14 */ + &snd_sb16_ctl_mic_play_vol, /* MX3A 13 */ + &snd_sb16_ctl_pc_speaker_vol, /* MX3B 14 */ + &snd_sb16_ctl_capture_vol, /* MX3F/40 15 */ + &snd_sb16_ctl_play_vol, /* MX41/42 15 */ + &snd_als4000_ctl_master_mono_playback_switch, /* MX4C 16 */ + &snd_als4k_ctl_master_mono_capture_route, /* MX4B 16 */ + &snd_als4000_ctl_mono_playback_switch, /* MX4C 16 */ + &snd_als4000_ctl_mixer_analog_loopback, /* MX4D 16 */ + &snd_als4000_ctl_mixer_digital_loopback, /* CR3 21 */ + &snd_als4000_3d_control_switch, /* MX50 17 */ + &snd_als4000_3d_control_ratio, /* MX50 17 */ + &snd_als4000_3d_control_freq, /* MX50 17 */ + &snd_als4000_3d_control_delay, /* MX51 18 */ + &snd_als4000_3d_control_poweroff_switch, /* MX51 18 */ + &snd_als4000_ctl_3db_freq_control_switch, /* MX4F 17 */ #ifdef NOT_AVAILABLE &snd_als4000_ctl_fmdac, &snd_als4000_ctl_qsound, @@ -905,13 +982,14 @@ static unsigned char dt019x_saved_regs[] = { }; static unsigned char als4000_saved_regs[] = { + /* please verify in dsheet whether regs to be added + are actually real H/W or just dummy */ SB_DSP4_MASTER_DEV, SB_DSP4_MASTER_DEV + 1, SB_DSP4_OUTPUT_SW, SB_DSP4_PCM_DEV, SB_DSP4_PCM_DEV + 1, SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, SB_DSP4_SYNTH_DEV, SB_DSP4_SYNTH_DEV + 1, SB_DSP4_CD_DEV, SB_DSP4_CD_DEV + 1, - SB_DSP4_MIC_AGC, SB_DSP4_MIC_DEV, SB_DSP4_SPEAKER_DEV, SB_DSP4_IGAIN_DEV, SB_DSP4_IGAIN_DEV + 1, @@ -919,8 +997,10 @@ static unsigned char als4000_saved_regs[] = { SB_DT019X_OUTPUT_SW2, SB_ALS4000_MONO_IO_CTRL, SB_ALS4000_MIC_IN_GAIN, + SB_ALS4000_FMDAC, SB_ALS4000_3D_SND_FX, SB_ALS4000_3D_TIME_DELAY, + SB_ALS4000_CR3_CONFIGURATION, }; static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) -- cgit v1.2.3 From e588ed8304f76cbb396ee85e657a58990298a675 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Fri, 20 Feb 2009 19:30:35 +0100 Subject: ALSA: hdsp - poll for iobox sleeping for 2 seconds before checking for the iobox is not enough on some systems. this patch increases the timeout, but polls the card during that time. it thus speeds up the module loading when the card has already been initialized, while being more robust on systems, which require a higher timeout than the predefined 2 seconds. Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index bacfdd12619b..12c6b4305ec1 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -653,7 +653,6 @@ static unsigned int hdsp_read(struct hdsp *hdsp, int reg) static int hdsp_check_for_iobox (struct hdsp *hdsp) { - if (hdsp->io_type == H9652 || hdsp->io_type == H9632) return 0; if (hdsp_read (hdsp, HDSP_statusRegister) & HDSP_ConfigError) { snd_printk ("Hammerfall-DSP: no Digiface or Multiface connected!\n"); @@ -661,7 +660,29 @@ static int hdsp_check_for_iobox (struct hdsp *hdsp) return -EIO; } return 0; +} +static int hdsp_wait_for_iobox(struct hdsp *hdsp, unsigned int loops, + unsigned int delay) +{ + unsigned int i; + + if (hdsp->io_type == H9652 || hdsp->io_type == H9632) + return 0; + + for (i = 0; i != loops; ++i) { + if (hdsp_read(hdsp, HDSP_statusRegister) & HDSP_ConfigError) + msleep(delay); + else { + snd_printd("Hammerfall-DSP: iobox found after %ums!\n", + i * delay); + return 0; + } + } + + snd_printk("Hammerfall-DSP: no Digiface or Multiface connected!\n"); + hdsp->state &= ~HDSP_FirmwareLoaded; + return -EIO; } static int snd_hdsp_load_firmware_from_cache(struct hdsp *hdsp) { @@ -5046,10 +5067,10 @@ static int __devinit snd_hdsp_create(struct snd_card *card, return err; if (!is_9652 && !is_9632) { - /* we wait 2 seconds to let freshly inserted cardbus cards do their hardware init */ - ssleep(2); + /* we wait a maximum of 10 seconds to let freshly + * inserted cardbus cards do their hardware init */ + err = hdsp_wait_for_iobox(hdsp, 1000, 10); - err = hdsp_check_for_iobox(hdsp); if (err < 0) return err; -- cgit v1.2.3 From f9ffc5d6f0161b66202f2df9ecc42d1be241020d Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Fri, 20 Feb 2009 19:38:16 +0100 Subject: ALSA: hdsp - whitespace cleanup Impact: remove trailing spaces Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 474 +++++++++++++++++++++++------------------------ 1 file changed, 237 insertions(+), 237 deletions(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 12c6b4305ec1..dc65fe1c9c65 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -113,7 +113,7 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin"); /* the meters are regular i/o-mapped registers, but offset considerably from the rest. the peak registers are reset - when read; the least-significant 4 bits are full-scale counters; + when read; the least-significant 4 bits are full-scale counters; the actual peak value is in the most-significant 24 bits. */ @@ -131,7 +131,7 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin"); 26*3 values are read in ss mode 14*3 in ds mode, with no gap between values */ -#define HDSP_9652_peakBase 7164 +#define HDSP_9652_peakBase 7164 #define HDSP_9652_rmsBase 4096 /* c.f. the hdsp_9632_meters_t struct */ @@ -173,12 +173,12 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin"); #define HDSP_SPDIFEmphasis (1<<10) /* 0=none, 1=on */ #define HDSP_SPDIFNonAudio (1<<11) /* 0=off, 1=on */ #define HDSP_SPDIFOpticalOut (1<<12) /* 1=use 1st ADAT connector for SPDIF, 0=do not */ -#define HDSP_SyncRef2 (1<<13) -#define HDSP_SPDIFInputSelect0 (1<<14) -#define HDSP_SPDIFInputSelect1 (1<<15) -#define HDSP_SyncRef0 (1<<16) +#define HDSP_SyncRef2 (1<<13) +#define HDSP_SPDIFInputSelect0 (1<<14) +#define HDSP_SPDIFInputSelect1 (1<<15) +#define HDSP_SyncRef0 (1<<16) #define HDSP_SyncRef1 (1<<17) -#define HDSP_AnalogExtensionBoard (1<<18) /* For H9632 cards */ +#define HDSP_AnalogExtensionBoard (1<<18) /* For H9632 cards */ #define HDSP_XLRBreakoutCable (1<<20) /* For H9632 cards */ #define HDSP_Midi0InterruptEnable (1<<22) #define HDSP_Midi1InterruptEnable (1<<23) @@ -314,7 +314,7 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin"); #define HDSP_TimecodeSync (1<<27) #define HDSP_AEBO (1<<28) /* H9632 specific Analog Extension Boards */ #define HDSP_AEBI (1<<29) /* 0 = present, 1 = absent */ -#define HDSP_midi0IRQPending (1<<30) +#define HDSP_midi0IRQPending (1<<30) #define HDSP_midi1IRQPending (1<<31) #define HDSP_spdifFrequencyMask (HDSP_spdifFrequency0|HDSP_spdifFrequency1|HDSP_spdifFrequency2) @@ -391,7 +391,7 @@ MODULE_FIRMWARE("digiface_firmware_rev11.bin"); #define HDSP_CHANNEL_BUFFER_BYTES (4*HDSP_CHANNEL_BUFFER_SAMPLES) /* the size of the area we need to allocate for DMA transfers. the - size is the same regardless of the number of channels - the + size is the same regardless of the number of channels - the Multiface still uses the same memory area. Note that we allocate 1 more channel than is apparently needed @@ -460,7 +460,7 @@ struct hdsp { unsigned char qs_in_channels; /* quad speed mode for H9632 */ unsigned char ds_in_channels; unsigned char ss_in_channels; /* different for multiface/digiface */ - unsigned char qs_out_channels; + unsigned char qs_out_channels; unsigned char ds_out_channels; unsigned char ss_out_channels; @@ -502,9 +502,9 @@ static char channel_map_df_ss[HDSP_MAX_CHANNELS] = { static char channel_map_mf_ss[HDSP_MAX_CHANNELS] = { /* Multiface */ /* Analog */ - 0, 1, 2, 3, 4, 5, 6, 7, + 0, 1, 2, 3, 4, 5, 6, 7, /* ADAT 2 */ - 16, 17, 18, 19, 20, 21, 22, 23, + 16, 17, 18, 19, 20, 21, 22, 23, /* SPDIF */ 24, 25, -1, -1, -1, -1, -1, -1, -1, -1 @@ -525,11 +525,11 @@ static char channel_map_H9632_ss[HDSP_MAX_CHANNELS] = { /* SPDIF */ 8, 9, /* Analog */ - 10, 11, + 10, 11, /* AO4S-192 and AI4S-192 extension boards */ 12, 13, 14, 15, /* others don't exist */ - -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; @@ -539,7 +539,7 @@ static char channel_map_H9632_ds[HDSP_MAX_CHANNELS] = { /* SPDIF */ 8, 9, /* Analog */ - 10, 11, + 10, 11, /* AO4S-192 and AI4S-192 extension boards */ 12, 13, 14, 15, /* others don't exist */ @@ -587,7 +587,7 @@ static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_d static struct pci_device_id snd_hdsp_ids[] = { { .vendor = PCI_VENDOR_ID_XILINX, - .device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP, + .device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, /* RME Hammerfall-DSP */ @@ -691,19 +691,19 @@ static int snd_hdsp_load_firmware_from_cache(struct hdsp *hdsp) { unsigned long flags; if ((hdsp_read (hdsp, HDSP_statusRegister) & HDSP_DllError) != 0) { - + snd_printk ("Hammerfall-DSP: loading firmware\n"); hdsp_write (hdsp, HDSP_control2Reg, HDSP_S_PROGRAM); hdsp_write (hdsp, HDSP_fifoData, 0); - + if (hdsp_fifo_wait (hdsp, 0, HDSP_LONG_WAIT)) { snd_printk ("Hammerfall-DSP: timeout waiting for download preparation\n"); return -EIO; } - + hdsp_write (hdsp, HDSP_control2Reg, HDSP_S_LOAD); - + for (i = 0; i < 24413; ++i) { hdsp_write(hdsp, HDSP_fifoData, hdsp->firmware_cache[i]); if (hdsp_fifo_wait (hdsp, 127, HDSP_LONG_WAIT)) { @@ -713,7 +713,7 @@ static int snd_hdsp_load_firmware_from_cache(struct hdsp *hdsp) { } ssleep(3); - + if (hdsp_fifo_wait (hdsp, 0, HDSP_LONG_WAIT)) { snd_printk ("Hammerfall-DSP: timeout at end of firmware loading\n"); return -EIO; @@ -726,15 +726,15 @@ static int snd_hdsp_load_firmware_from_cache(struct hdsp *hdsp) { #endif hdsp_write (hdsp, HDSP_control2Reg, hdsp->control2_register); snd_printk ("Hammerfall-DSP: finished firmware loading\n"); - + } if (hdsp->state & HDSP_InitializationComplete) { snd_printk(KERN_INFO "Hammerfall-DSP: firmware loaded from cache, restoring defaults\n"); spin_lock_irqsave(&hdsp->lock, flags); snd_hdsp_set_defaults(hdsp); - spin_unlock_irqrestore(&hdsp->lock, flags); + spin_unlock_irqrestore(&hdsp->lock, flags); } - + hdsp->state |= HDSP_FirmwareLoaded; return 0; @@ -743,7 +743,7 @@ static int snd_hdsp_load_firmware_from_cache(struct hdsp *hdsp) { static int hdsp_get_iobox_version (struct hdsp *hdsp) { if ((hdsp_read (hdsp, HDSP_statusRegister) & HDSP_DllError) != 0) { - + hdsp_write (hdsp, HDSP_control2Reg, HDSP_PROGRAM); hdsp_write (hdsp, HDSP_fifoData, 0); if (hdsp_fifo_wait (hdsp, 0, HDSP_SHORT_WAIT) < 0) @@ -759,7 +759,7 @@ static int hdsp_get_iobox_version (struct hdsp *hdsp) hdsp_fifo_wait (hdsp, 0, HDSP_SHORT_WAIT); } else { hdsp->io_type = Digiface; - } + } } else { /* firmware was already loaded, get iobox type */ if (hdsp_read(hdsp, HDSP_status2Register) & HDSP_version1) @@ -807,13 +807,13 @@ static int hdsp_check_for_firmware (struct hdsp *hdsp, int load_on_demand) static int hdsp_fifo_wait(struct hdsp *hdsp, int count, int timeout) -{ +{ int i; /* the fifoStatus registers reports on how many words are available in the command FIFO. */ - + for (i = 0; i < timeout; i++) { if ((int)(hdsp_read (hdsp, HDSP_fifoStatus) & 0xff) <= count) @@ -845,11 +845,11 @@ static int hdsp_write_gain(struct hdsp *hdsp, unsigned int addr, unsigned short if (addr >= HDSP_MATRIX_MIXER_SIZE) return -1; - + if (hdsp->io_type == H9652 || hdsp->io_type == H9632) { /* from martin bjornsen: - + "You can only write dwords to the mixer memory which contain two mixer values in the low and high @@ -868,7 +868,7 @@ static int hdsp_write_gain(struct hdsp *hdsp, unsigned int addr, unsigned short hdsp->mixer_matrix[addr] = data; - + /* `addr' addresses a 16-bit wide address, but the address space accessed via hdsp_write uses byte offsets. put another way, addr @@ -877,17 +877,17 @@ static int hdsp_write_gain(struct hdsp *hdsp, unsigned int addr, unsigned short to access 0 to 2703 ... */ ad = addr/2; - - hdsp_write (hdsp, 4096 + (ad*4), - (hdsp->mixer_matrix[(addr&0x7fe)+1] << 16) + + + hdsp_write (hdsp, 4096 + (ad*4), + (hdsp->mixer_matrix[(addr&0x7fe)+1] << 16) + hdsp->mixer_matrix[addr&0x7fe]); - + return 0; } else { ad = (addr << 16) + data; - + if (hdsp_fifo_wait(hdsp, 127, HDSP_LONG_WAIT)) return -1; @@ -923,7 +923,7 @@ static int hdsp_spdif_sample_rate(struct hdsp *hdsp) if (status & HDSP_SPDIFErrorFlag) return 0; - + switch (rate_bits) { case HDSP_spdifFrequency32KHz: return 32000; case HDSP_spdifFrequency44_1KHz: return 44100; @@ -931,13 +931,13 @@ static int hdsp_spdif_sample_rate(struct hdsp *hdsp) case HDSP_spdifFrequency64KHz: return 64000; case HDSP_spdifFrequency88_2KHz: return 88200; case HDSP_spdifFrequency96KHz: return 96000; - case HDSP_spdifFrequency128KHz: + case HDSP_spdifFrequency128KHz: if (hdsp->io_type == H9632) return 128000; break; - case HDSP_spdifFrequency176_4KHz: + case HDSP_spdifFrequency176_4KHz: if (hdsp->io_type == H9632) return 176400; break; - case HDSP_spdifFrequency192KHz: + case HDSP_spdifFrequency192KHz: if (hdsp->io_type == H9632) return 192000; break; default: @@ -1048,7 +1048,7 @@ static void hdsp_set_dds_value(struct hdsp *hdsp, int rate) { u64 n; u32 r; - + if (rate >= 112000) rate /= 4; else if (rate >= 56000) @@ -1074,35 +1074,35 @@ static int hdsp_set_rate(struct hdsp *hdsp, int rate, int called_internally) there is no need for it (e.g. during module initialization). */ - - if (!(hdsp->control_register & HDSP_ClockModeMaster)) { + + if (!(hdsp->control_register & HDSP_ClockModeMaster)) { if (called_internally) { /* request from ctl or card initialization */ snd_printk(KERN_ERR "Hammerfall-DSP: device is not running as a clock master: cannot set sample rate.\n"); return -1; - } else { + } else { /* hw_param request while in AutoSync mode */ int external_freq = hdsp_external_sample_rate(hdsp); int spdif_freq = hdsp_spdif_sample_rate(hdsp); - + if ((spdif_freq == external_freq*2) && (hdsp_autosync_ref(hdsp) >= HDSP_AUTOSYNC_FROM_ADAT1)) snd_printk(KERN_INFO "Hammerfall-DSP: Detected ADAT in double speed mode\n"); else if (hdsp->io_type == H9632 && (spdif_freq == external_freq*4) && (hdsp_autosync_ref(hdsp) >= HDSP_AUTOSYNC_FROM_ADAT1)) - snd_printk(KERN_INFO "Hammerfall-DSP: Detected ADAT in quad speed mode\n"); + snd_printk(KERN_INFO "Hammerfall-DSP: Detected ADAT in quad speed mode\n"); else if (rate != external_freq) { snd_printk(KERN_INFO "Hammerfall-DSP: No AutoSync source for requested rate\n"); return -1; - } - } + } + } } current_rate = hdsp->system_sample_rate; /* Changing from a "single speed" to a "double speed" rate is not allowed if any substreams are open. This is because - such a change causes a shift in the location of + such a change causes a shift in the location of the DMA buffers and a reduction in the number of available - buffers. + buffers. Note that a similar but essentially insoluble problem exists for externally-driven rate changes. All we can do @@ -1110,7 +1110,7 @@ static int hdsp_set_rate(struct hdsp *hdsp, int rate, int called_internally) if (rate > 96000 && hdsp->io_type != H9632) return -EINVAL; - + switch (rate) { case 32000: if (current_rate > 48000) @@ -1200,7 +1200,7 @@ static int hdsp_set_rate(struct hdsp *hdsp, int rate, int called_internally) break; } } - + hdsp->system_sample_rate = rate; return 0; @@ -1266,16 +1266,16 @@ static int snd_hdsp_midi_output_write (struct hdsp_midi *hmidi) unsigned char buf[128]; /* Output is not interrupt driven */ - + spin_lock_irqsave (&hmidi->lock, flags); if (hmidi->output) { if (!snd_rawmidi_transmit_empty (hmidi->output)) { if ((n_pending = snd_hdsp_midi_output_possible (hmidi->hdsp, hmidi->id)) > 0) { if (n_pending > (int)sizeof (buf)) n_pending = sizeof (buf); - + if ((to_write = snd_rawmidi_transmit (hmidi->output, buf, n_pending)) > 0) { - for (i = 0; i < to_write; ++i) + for (i = 0; i < to_write; ++i) snd_hdsp_midi_write_byte (hmidi->hdsp, hmidi->id, buf[i]); } } @@ -1346,14 +1346,14 @@ static void snd_hdsp_midi_output_timer(unsigned long data) { struct hdsp_midi *hmidi = (struct hdsp_midi *) data; unsigned long flags; - + snd_hdsp_midi_output_write(hmidi); spin_lock_irqsave (&hmidi->lock, flags); /* this does not bump hmidi->istimer, because the kernel automatically removed the timer when it expired, and we are now adding it back, thus - leaving istimer wherever it was set before. + leaving istimer wherever it was set before. */ if (hmidi->istimer) { @@ -1522,7 +1522,7 @@ static int snd_hdsp_control_spdif_info(struct snd_kcontrol *kcontrol, struct snd static int snd_hdsp_control_spdif_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + snd_hdsp_convert_to_aes(&ucontrol->value.iec958, hdsp->creg_spdif); return 0; } @@ -1532,7 +1532,7 @@ static int snd_hdsp_control_spdif_put(struct snd_kcontrol *kcontrol, struct snd_ struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; u32 val; - + val = snd_hdsp_convert_from_aes(&ucontrol->value.iec958); spin_lock_irq(&hdsp->lock); change = val != hdsp->creg_spdif; @@ -1551,7 +1551,7 @@ static int snd_hdsp_control_spdif_stream_info(struct snd_kcontrol *kcontrol, str static int snd_hdsp_control_spdif_stream_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + snd_hdsp_convert_to_aes(&ucontrol->value.iec958, hdsp->creg_spdif_stream); return 0; } @@ -1561,7 +1561,7 @@ static int snd_hdsp_control_spdif_stream_put(struct snd_kcontrol *kcontrol, stru struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; u32 val; - + val = snd_hdsp_convert_from_aes(&ucontrol->value.iec958); spin_lock_irq(&hdsp->lock); change = val != hdsp->creg_spdif_stream; @@ -1623,7 +1623,7 @@ static int snd_hdsp_info_spdif_in(struct snd_kcontrol *kcontrol, struct snd_ctl_ static int snd_hdsp_get_spdif_in(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_spdif_in(hdsp); return 0; } @@ -1633,7 +1633,7 @@ static int snd_hdsp_put_spdif_in(struct snd_kcontrol *kcontrol, struct snd_ctl_e struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.enumerated.item[0] % ((hdsp->io_type == H9632) ? 4 : 3); @@ -1670,7 +1670,7 @@ static int hdsp_set_spdif_output(struct hdsp *hdsp, int out) static int snd_hdsp_get_spdif_out(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.integer.value[0] = hdsp_spdif_out(hdsp); return 0; } @@ -1680,7 +1680,7 @@ static int snd_hdsp_put_spdif_out(struct snd_kcontrol *kcontrol, struct snd_ctl_ struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -1714,7 +1714,7 @@ static int hdsp_set_spdif_professional(struct hdsp *hdsp, int val) static int snd_hdsp_get_spdif_professional(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.integer.value[0] = hdsp_spdif_professional(hdsp); return 0; } @@ -1724,7 +1724,7 @@ static int snd_hdsp_put_spdif_professional(struct snd_kcontrol *kcontrol, struct struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -1758,7 +1758,7 @@ static int hdsp_set_spdif_emphasis(struct hdsp *hdsp, int val) static int snd_hdsp_get_spdif_emphasis(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.integer.value[0] = hdsp_spdif_emphasis(hdsp); return 0; } @@ -1768,7 +1768,7 @@ static int snd_hdsp_put_spdif_emphasis(struct snd_kcontrol *kcontrol, struct snd struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -1802,7 +1802,7 @@ static int hdsp_set_spdif_nonaudio(struct hdsp *hdsp, int val) static int snd_hdsp_get_spdif_nonaudio(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.integer.value[0] = hdsp_spdif_nonaudio(hdsp); return 0; } @@ -1812,7 +1812,7 @@ static int snd_hdsp_put_spdif_nonaudio(struct snd_kcontrol *kcontrol, struct snd struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -1849,7 +1849,7 @@ static int snd_hdsp_info_spdif_sample_rate(struct snd_kcontrol *kcontrol, struct static int snd_hdsp_get_spdif_sample_rate(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + switch (hdsp_spdif_sample_rate(hdsp)) { case 32000: ucontrol->value.enumerated.item[0] = 0; @@ -1879,7 +1879,7 @@ static int snd_hdsp_get_spdif_sample_rate(struct snd_kcontrol *kcontrol, struct ucontrol->value.enumerated.item[0] = 9; break; default: - ucontrol->value.enumerated.item[0] = 6; + ucontrol->value.enumerated.item[0] = 6; } return 0; } @@ -1903,7 +1903,7 @@ static int snd_hdsp_info_system_sample_rate(struct snd_kcontrol *kcontrol, struc static int snd_hdsp_get_system_sample_rate(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp->system_sample_rate; return 0; } @@ -1920,7 +1920,7 @@ static int snd_hdsp_get_system_sample_rate(struct snd_kcontrol *kcontrol, struct static int snd_hdsp_info_autosync_sample_rate(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - static char *texts[] = {"32000", "44100", "48000", "64000", "88200", "96000", "None", "128000", "176400", "192000"}; + static char *texts[] = {"32000", "44100", "48000", "64000", "88200", "96000", "None", "128000", "176400", "192000"}; uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = (hdsp->io_type == H9632) ? 10 : 7 ; @@ -1933,7 +1933,7 @@ static int snd_hdsp_info_autosync_sample_rate(struct snd_kcontrol *kcontrol, str static int snd_hdsp_get_autosync_sample_rate(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + switch (hdsp_external_sample_rate(hdsp)) { case 32000: ucontrol->value.enumerated.item[0] = 0; @@ -1961,9 +1961,9 @@ static int snd_hdsp_get_autosync_sample_rate(struct snd_kcontrol *kcontrol, stru break; case 192000: ucontrol->value.enumerated.item[0] = 9; - break; + break; default: - ucontrol->value.enumerated.item[0] = 6; + ucontrol->value.enumerated.item[0] = 6; } return 0; } @@ -1989,7 +1989,7 @@ static int hdsp_system_clock_mode(struct hdsp *hdsp) static int snd_hdsp_info_system_clock_mode(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = {"Master", "Slave" }; - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 2; @@ -2002,7 +2002,7 @@ static int snd_hdsp_info_system_clock_mode(struct snd_kcontrol *kcontrol, struct static int snd_hdsp_get_system_clock_mode(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_system_clock_mode(hdsp); return 0; } @@ -2039,7 +2039,7 @@ static int hdsp_clock_source(struct hdsp *hdsp) case 192000: return 9; default: - return 3; + return 3; } } else { return 0; @@ -2053,7 +2053,7 @@ static int hdsp_set_clock_source(struct hdsp *hdsp, int mode) case HDSP_CLOCK_SOURCE_AUTOSYNC: if (hdsp_external_sample_rate(hdsp) != 0) { if (!hdsp_set_rate(hdsp, hdsp_external_sample_rate(hdsp), 1)) { - hdsp->control_register &= ~HDSP_ClockModeMaster; + hdsp->control_register &= ~HDSP_ClockModeMaster; hdsp_write(hdsp, HDSP_controlRegister, hdsp->control_register); return 0; } @@ -2064,7 +2064,7 @@ static int hdsp_set_clock_source(struct hdsp *hdsp, int mode) break; case HDSP_CLOCK_SOURCE_INTERNAL_44_1KHZ: rate = 44100; - break; + break; case HDSP_CLOCK_SOURCE_INTERNAL_48KHZ: rate = 48000; break; @@ -2099,13 +2099,13 @@ static int snd_hdsp_info_clock_source(struct snd_kcontrol *kcontrol, struct snd_ { static char *texts[] = {"AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz", "Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz", "Internal 96.0 kHz", "Internal 128 kHz", "Internal 176.4 kHz", "Internal 192.0 KHz" }; struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; if (hdsp->io_type == H9632) uinfo->value.enumerated.items = 10; else - uinfo->value.enumerated.items = 7; + uinfo->value.enumerated.items = 7; if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1; strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); @@ -2115,7 +2115,7 @@ static int snd_hdsp_info_clock_source(struct snd_kcontrol *kcontrol, struct snd_ static int snd_hdsp_get_clock_source(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_clock_source(hdsp); return 0; } @@ -2125,7 +2125,7 @@ static int snd_hdsp_put_clock_source(struct snd_kcontrol *kcontrol, struct snd_c struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.enumerated.item[0]; @@ -2151,7 +2151,7 @@ static int snd_hdsp_put_clock_source(struct snd_kcontrol *kcontrol, struct snd_c static int snd_hdsp_get_clock_source_lock(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.integer.value[0] = hdsp->clock_source_locked; return 0; } @@ -2186,7 +2186,7 @@ static int hdsp_da_gain(struct hdsp *hdsp) case HDSP_DAGainMinus10dBV: return 2; default: - return 1; + return 1; } } @@ -2201,8 +2201,8 @@ static int hdsp_set_da_gain(struct hdsp *hdsp, int mode) hdsp->control_register |= HDSP_DAGainPlus4dBu; break; case 2: - hdsp->control_register |= HDSP_DAGainMinus10dBV; - break; + hdsp->control_register |= HDSP_DAGainMinus10dBV; + break; default: return -1; @@ -2214,7 +2214,7 @@ static int hdsp_set_da_gain(struct hdsp *hdsp, int mode) static int snd_hdsp_info_da_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = {"Hi Gain", "+4 dBu", "-10 dbV"}; - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 3; @@ -2227,7 +2227,7 @@ static int snd_hdsp_info_da_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_e static int snd_hdsp_get_da_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_da_gain(hdsp); return 0; } @@ -2237,7 +2237,7 @@ static int snd_hdsp_put_da_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_el struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.enumerated.item[0]; @@ -2271,7 +2271,7 @@ static int hdsp_ad_gain(struct hdsp *hdsp) case HDSP_ADGainLowGain: return 2; default: - return 1; + return 1; } } @@ -2283,11 +2283,11 @@ static int hdsp_set_ad_gain(struct hdsp *hdsp, int mode) hdsp->control_register |= HDSP_ADGainMinus10dBV; break; case 1: - hdsp->control_register |= HDSP_ADGainPlus4dBu; + hdsp->control_register |= HDSP_ADGainPlus4dBu; break; case 2: - hdsp->control_register |= HDSP_ADGainLowGain; - break; + hdsp->control_register |= HDSP_ADGainLowGain; + break; default: return -1; @@ -2299,7 +2299,7 @@ static int hdsp_set_ad_gain(struct hdsp *hdsp, int mode) static int snd_hdsp_info_ad_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = {"-10 dBV", "+4 dBu", "Lo Gain"}; - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 3; @@ -2312,7 +2312,7 @@ static int snd_hdsp_info_ad_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_e static int snd_hdsp_get_ad_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_ad_gain(hdsp); return 0; } @@ -2322,7 +2322,7 @@ static int snd_hdsp_put_ad_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_el struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.enumerated.item[0]; @@ -2356,7 +2356,7 @@ static int hdsp_phone_gain(struct hdsp *hdsp) case HDSP_PhoneGainMinus12dB: return 2; default: - return 0; + return 0; } } @@ -2368,11 +2368,11 @@ static int hdsp_set_phone_gain(struct hdsp *hdsp, int mode) hdsp->control_register |= HDSP_PhoneGain0dB; break; case 1: - hdsp->control_register |= HDSP_PhoneGainMinus6dB; + hdsp->control_register |= HDSP_PhoneGainMinus6dB; break; case 2: - hdsp->control_register |= HDSP_PhoneGainMinus12dB; - break; + hdsp->control_register |= HDSP_PhoneGainMinus12dB; + break; default: return -1; @@ -2384,7 +2384,7 @@ static int hdsp_set_phone_gain(struct hdsp *hdsp, int mode) static int snd_hdsp_info_phone_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = {"0 dB", "-6 dB", "-12 dB"}; - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 3; @@ -2397,7 +2397,7 @@ static int snd_hdsp_info_phone_gain(struct snd_kcontrol *kcontrol, struct snd_ct static int snd_hdsp_get_phone_gain(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_phone_gain(hdsp); return 0; } @@ -2407,7 +2407,7 @@ static int snd_hdsp_put_phone_gain(struct snd_kcontrol *kcontrol, struct snd_ctl struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.enumerated.item[0]; @@ -2453,7 +2453,7 @@ static int hdsp_set_xlr_breakout_cable(struct hdsp *hdsp, int mode) static int snd_hdsp_get_xlr_breakout_cable(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_xlr_breakout_cable(hdsp); return 0; } @@ -2463,7 +2463,7 @@ static int snd_hdsp_put_xlr_breakout_cable(struct snd_kcontrol *kcontrol, struct struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -2509,7 +2509,7 @@ static int hdsp_set_aeb(struct hdsp *hdsp, int mode) static int snd_hdsp_get_aeb(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_aeb(hdsp); return 0; } @@ -2519,7 +2519,7 @@ static int snd_hdsp_put_aeb(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_v struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -2597,7 +2597,7 @@ static int snd_hdsp_info_pref_sync_ref(struct snd_kcontrol *kcontrol, struct snd { static char *texts[] = {"Word", "IEC958", "ADAT1", "ADAT Sync", "ADAT2", "ADAT3" }; struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; @@ -2616,7 +2616,7 @@ static int snd_hdsp_info_pref_sync_ref(struct snd_kcontrol *kcontrol, struct snd uinfo->value.enumerated.items = 0; break; } - + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1; strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); @@ -2626,7 +2626,7 @@ static int snd_hdsp_info_pref_sync_ref(struct snd_kcontrol *kcontrol, struct snd static int snd_hdsp_get_pref_sync_ref(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_pref_sync_ref(hdsp); return 0; } @@ -2636,7 +2636,7 @@ static int snd_hdsp_put_pref_sync_ref(struct snd_kcontrol *kcontrol, struct snd_ struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change, max; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; @@ -2685,7 +2685,7 @@ static int hdsp_autosync_ref(struct hdsp *hdsp) case HDSP_SelSyncRef_SPDIF: return HDSP_AUTOSYNC_FROM_SPDIF; case HDSP_SelSyncRefMask: - return HDSP_AUTOSYNC_FROM_NONE; + return HDSP_AUTOSYNC_FROM_NONE; case HDSP_SelSyncRef_ADAT1: return HDSP_AUTOSYNC_FROM_ADAT1; case HDSP_SelSyncRef_ADAT2: @@ -2701,7 +2701,7 @@ static int hdsp_autosync_ref(struct hdsp *hdsp) static int snd_hdsp_info_autosync_ref(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = {"Word", "ADAT Sync", "IEC958", "None", "ADAT1", "ADAT2", "ADAT3" }; - + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 7; @@ -2714,7 +2714,7 @@ static int snd_hdsp_info_autosync_ref(struct snd_kcontrol *kcontrol, struct snd_ static int snd_hdsp_get_autosync_ref(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_autosync_ref(hdsp); return 0; } @@ -2748,7 +2748,7 @@ static int hdsp_set_line_output(struct hdsp *hdsp, int out) static int snd_hdsp_get_line_out(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + spin_lock_irq(&hdsp->lock); ucontrol->value.integer.value[0] = hdsp_line_out(hdsp); spin_unlock_irq(&hdsp->lock); @@ -2760,7 +2760,7 @@ static int snd_hdsp_put_line_out(struct snd_kcontrol *kcontrol, struct snd_ctl_e struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -2794,7 +2794,7 @@ static int hdsp_set_precise_pointer(struct hdsp *hdsp, int precise) static int snd_hdsp_get_precise_pointer(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + spin_lock_irq(&hdsp->lock); ucontrol->value.integer.value[0] = hdsp->precise_ptr; spin_unlock_irq(&hdsp->lock); @@ -2806,7 +2806,7 @@ static int snd_hdsp_put_precise_pointer(struct snd_kcontrol *kcontrol, struct sn struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -2840,7 +2840,7 @@ static int hdsp_set_use_midi_tasklet(struct hdsp *hdsp, int use_tasklet) static int snd_hdsp_get_use_midi_tasklet(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + spin_lock_irq(&hdsp->lock); ucontrol->value.integer.value[0] = hdsp->use_midi_tasklet; spin_unlock_irq(&hdsp->lock); @@ -2852,7 +2852,7 @@ static int snd_hdsp_put_use_midi_tasklet(struct snd_kcontrol *kcontrol, struct s struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; unsigned int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.integer.value[0] & 1; @@ -2894,12 +2894,12 @@ static int snd_hdsp_get_mixer(struct snd_kcontrol *kcontrol, struct snd_ctl_elem source = ucontrol->value.integer.value[0]; destination = ucontrol->value.integer.value[1]; - + if (source >= hdsp->max_channels) addr = hdsp_playback_to_output_key(hdsp,source-hdsp->max_channels,destination); else addr = hdsp_input_to_output_key(hdsp,source, destination); - + spin_lock_irq(&hdsp->lock); ucontrol->value.integer.value[2] = hdsp_read_gain (hdsp, addr); spin_unlock_irq(&hdsp->lock); @@ -2947,7 +2947,7 @@ static int snd_hdsp_put_mixer(struct snd_kcontrol *kcontrol, struct snd_ctl_elem static int snd_hdsp_info_sync_check(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { - static char *texts[] = {"No Lock", "Lock", "Sync" }; + static char *texts[] = {"No Lock", "Lock", "Sync" }; uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 3; @@ -2992,7 +2992,7 @@ static int hdsp_spdif_sync_check(struct hdsp *hdsp) int status = hdsp_read(hdsp, HDSP_statusRegister); if (status & HDSP_SPDIFErrorFlag) return 0; - else { + else { if (status & HDSP_SPDIFSync) return 2; else @@ -3028,7 +3028,7 @@ static int hdsp_adatsync_sync_check(struct hdsp *hdsp) return 1; } else return 0; -} +} static int snd_hdsp_get_adatsync_sync_check(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -3046,17 +3046,17 @@ static int snd_hdsp_get_adatsync_sync_check(struct snd_kcontrol *kcontrol, struc } static int hdsp_adat_sync_check(struct hdsp *hdsp, int idx) -{ +{ int status = hdsp_read(hdsp, HDSP_statusRegister); - + if (status & (HDSP_Lock0>>idx)) { if (status & (HDSP_Sync0>>idx)) return 2; else - return 1; + return 1; } else return 0; -} +} static int snd_hdsp_get_adat_sync_check(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -3074,7 +3074,7 @@ static int snd_hdsp_get_adat_sync_check(struct snd_kcontrol *kcontrol, struct sn break; case Multiface: case H9632: - if (offset >= 1) + if (offset >= 1) return -EINVAL; break; default: @@ -3136,7 +3136,7 @@ static int snd_hdsp_info_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ct static int snd_hdsp_get_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); - + ucontrol->value.enumerated.item[0] = hdsp_dds_offset(hdsp); return 0; } @@ -3146,7 +3146,7 @@ static int snd_hdsp_put_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl struct hdsp *hdsp = snd_kcontrol_chip(kcontrol); int change; int val; - + if (!snd_hdsp_use_is_exclusive(hdsp)) return -EBUSY; val = ucontrol->value.enumerated.item[0]; @@ -3191,7 +3191,7 @@ static struct snd_kcontrol_new snd_hdsp_controls[] = { .get = snd_hdsp_control_spdif_mask_get, .private_value = IEC958_AES0_NONAUDIO | IEC958_AES0_PROFESSIONAL | - IEC958_AES0_CON_EMPHASIS, + IEC958_AES0_CON_EMPHASIS, }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, @@ -3209,7 +3209,7 @@ HDSP_SPDIF_OUT("IEC958 Output also on ADAT1", 0), HDSP_SPDIF_PROFESSIONAL("IEC958 Professional Bit", 0), HDSP_SPDIF_EMPHASIS("IEC958 Emphasis Bit", 0), HDSP_SPDIF_NON_AUDIO("IEC958 Non-audio Bit", 0), -/* 'Sample Clock Source' complies with the alsa control naming scheme */ +/* 'Sample Clock Source' complies with the alsa control naming scheme */ HDSP_CLOCK_SOURCE("Sample Clock Source", 0), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -3261,7 +3261,7 @@ static int snd_hdsp_create_controls(struct snd_card *card, struct hdsp *hdsp) return err; } } - + /* DA, AD and Phone gain and XLR breakout cable controls for H9632 cards */ if (hdsp->io_type == H9632) { for (idx = 0; idx < ARRAY_SIZE(snd_hdsp_9632_controls); idx++) { @@ -3280,7 +3280,7 @@ static int snd_hdsp_create_controls(struct snd_card *card, struct hdsp *hdsp) } /*------------------------------------------------------------ - /proc interface + /proc interface ------------------------------------------------------------*/ static void @@ -3319,7 +3319,7 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) } } } - + status = hdsp_read(hdsp, HDSP_statusRegister); status2 = hdsp_read(hdsp, HDSP_status2Register); @@ -3383,17 +3383,17 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) break; case HDSP_CLOCK_SOURCE_INTERNAL_192KHZ: clock_source = "Internal 192 kHz"; - break; + break; default: - clock_source = "Error"; + clock_source = "Error"; } snd_iprintf (buffer, "Sample Clock Source: %s\n", clock_source); - + if (hdsp_system_clock_mode(hdsp)) system_clock_mode = "Slave"; else system_clock_mode = "Master"; - + switch (hdsp_pref_sync_ref (hdsp)) { case HDSP_SYNC_FROM_WORD: pref_sync_ref = "Word Clock"; @@ -3418,7 +3418,7 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) break; } snd_iprintf (buffer, "Preferred Sync Reference: %s\n", pref_sync_ref); - + switch (hdsp_autosync_ref (hdsp)) { case HDSP_AUTOSYNC_FROM_WORD: autosync_ref = "Word Clock"; @@ -3431,7 +3431,7 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) break; case HDSP_AUTOSYNC_FROM_NONE: autosync_ref = "None"; - break; + break; case HDSP_AUTOSYNC_FROM_ADAT1: autosync_ref = "ADAT1"; break; @@ -3446,14 +3446,14 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) break; } snd_iprintf (buffer, "AutoSync Reference: %s\n", autosync_ref); - + snd_iprintf (buffer, "AutoSync Frequency: %d\n", hdsp_external_sample_rate(hdsp)); - + snd_iprintf (buffer, "System Clock Mode: %s\n", system_clock_mode); snd_iprintf (buffer, "System Clock Frequency: %d\n", hdsp->system_sample_rate); snd_iprintf (buffer, "System Clock Locked: %s\n", hdsp->clock_source_locked ? "Yes" : "No"); - + snd_iprintf(buffer, "\n"); switch (hdsp_spdif_in(hdsp)) { @@ -3473,7 +3473,7 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) snd_iprintf(buffer, "IEC958 input: ???\n"); break; } - + if (hdsp->control_register & HDSP_SPDIFOpticalOut) snd_iprintf(buffer, "IEC958 output: Coaxial & ADAT1\n"); else @@ -3531,13 +3531,13 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) snd_iprintf (buffer, "SPDIF: No Lock\n"); else snd_iprintf (buffer, "SPDIF: %s\n", x ? "Sync" : "Lock"); - + x = status2 & HDSP_wc_sync; if (status2 & HDSP_wc_lock) snd_iprintf (buffer, "Word Clock: %s\n", x ? "Sync" : "Lock"); else snd_iprintf (buffer, "Word Clock: No Lock\n"); - + x = status & HDSP_TimecodeSync; if (status & HDSP_TimecodeLock) snd_iprintf(buffer, "ADAT Sync: %s\n", x ? "Sync" : "Lock"); @@ -3545,11 +3545,11 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) snd_iprintf(buffer, "ADAT Sync: No Lock\n"); snd_iprintf(buffer, "\n"); - + /* Informations about H9632 specific controls */ if (hdsp->io_type == H9632) { char *tmp; - + switch (hdsp_ad_gain(hdsp)) { case 0: tmp = "-10 dBV"; @@ -3575,7 +3575,7 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) break; } snd_iprintf(buffer, "DA Gain : %s\n", tmp); - + switch (hdsp_phone_gain(hdsp)) { case 0: tmp = "0 dB"; @@ -3589,8 +3589,8 @@ snd_hdsp_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) } snd_iprintf(buffer, "Phones Gain : %s\n", tmp); - snd_iprintf(buffer, "XLR Breakout Cable : %s\n", hdsp_xlr_breakout_cable(hdsp) ? "yes" : "no"); - + snd_iprintf(buffer, "XLR Breakout Cable : %s\n", hdsp_xlr_breakout_cable(hdsp) ? "yes" : "no"); + if (hdsp->control_register & HDSP_AnalogExtensionBoard) snd_iprintf(buffer, "AEB : on (ADAT1 internal)\n"); else @@ -3653,18 +3653,18 @@ static int snd_hdsp_set_defaults(struct hdsp *hdsp) /* set defaults: - SPDIF Input via Coax + SPDIF Input via Coax Master clock mode maximum latency (7 => 2^7 = 8192 samples, 64Kbyte buffer, which implies 2 4096 sample, 32Kbyte periods). - Enable line out. + Enable line out. */ - hdsp->control_register = HDSP_ClockModeMaster | - HDSP_SPDIFInputCoaxial | - hdsp_encode_latency(7) | + hdsp->control_register = HDSP_ClockModeMaster | + HDSP_SPDIFInputCoaxial | + hdsp_encode_latency(7) | HDSP_LineOut; - + hdsp_write(hdsp, HDSP_controlRegister, hdsp->control_register); @@ -3682,7 +3682,7 @@ static int snd_hdsp_set_defaults(struct hdsp *hdsp) hdsp_compute_period_size(hdsp); /* silence everything */ - + for (i = 0; i < HDSP_MATRIX_MIXER_SIZE; ++i) hdsp->mixer_matrix[i] = MINUS_INFINITY_GAIN; @@ -3690,7 +3690,7 @@ static int snd_hdsp_set_defaults(struct hdsp *hdsp) if (hdsp_write_gain (hdsp, i, MINUS_INFINITY_GAIN)) return -EIO; } - + /* H9632 specific defaults */ if (hdsp->io_type == H9632) { hdsp->control_register |= (HDSP_DAGainPlus4dBu | HDSP_ADGainPlus4dBu | HDSP_PhoneGain0dB); @@ -3708,12 +3708,12 @@ static int snd_hdsp_set_defaults(struct hdsp *hdsp) static void hdsp_midi_tasklet(unsigned long arg) { struct hdsp *hdsp = (struct hdsp *)arg; - + if (hdsp->midi[0].pending) snd_hdsp_midi_input_read (&hdsp->midi[0]); if (hdsp->midi[1].pending) snd_hdsp_midi_input_read (&hdsp->midi[1]); -} +} static irqreturn_t snd_hdsp_interrupt(int irq, void *dev_id) { @@ -3725,7 +3725,7 @@ static irqreturn_t snd_hdsp_interrupt(int irq, void *dev_id) unsigned int midi0status; unsigned int midi1status; int schedule = 0; - + status = hdsp_read(hdsp, HDSP_statusRegister); audio = status & HDSP_audioIRQPending; @@ -3739,15 +3739,15 @@ static irqreturn_t snd_hdsp_interrupt(int irq, void *dev_id) midi0status = hdsp_read (hdsp, HDSP_midiStatusIn0) & 0xff; midi1status = hdsp_read (hdsp, HDSP_midiStatusIn1) & 0xff; - + if (audio) { if (hdsp->capture_substream) snd_pcm_period_elapsed(hdsp->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); - + if (hdsp->playback_substream) snd_pcm_period_elapsed(hdsp->pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream); } - + if (midi0 && midi0status) { if (hdsp->use_midi_tasklet) { /* we disable interrupts for this input until processing is done */ @@ -3790,10 +3790,10 @@ static char *hdsp_channel_buffer_location(struct hdsp *hdsp, if (snd_BUG_ON(channel < 0 || channel >= hdsp->max_channels)) return NULL; - + if ((mapped_channel = hdsp->channel_map[channel]) < 0) return NULL; - + if (stream == SNDRV_PCM_STREAM_CAPTURE) return hdsp->capture_buffer + (mapped_channel * HDSP_CHANNEL_BUFFER_BYTES); else @@ -3986,7 +3986,7 @@ static int snd_hdsp_trigger(struct snd_pcm_substream *substream, int cmd) struct hdsp *hdsp = snd_pcm_substream_chip(substream); struct snd_pcm_substream *other; int running; - + if (hdsp_check_for_iobox (hdsp)) return -EIO; @@ -4080,10 +4080,10 @@ static struct snd_pcm_hardware snd_hdsp_playback_subinfo = .formats = SNDRV_PCM_FMTBIT_S32_LE, #endif .rates = (SNDRV_PCM_RATE_32000 | - SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000 | - SNDRV_PCM_RATE_64000 | - SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000), .rate_min = 32000, .rate_max = 96000, @@ -4109,10 +4109,10 @@ static struct snd_pcm_hardware snd_hdsp_capture_subinfo = .formats = SNDRV_PCM_FMTBIT_S32_LE, #endif .rates = (SNDRV_PCM_RATE_32000 | - SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000 | - SNDRV_PCM_RATE_64000 | - SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000), .rate_min = 32000, .rate_max = 96000, @@ -4191,7 +4191,7 @@ static int snd_hdsp_hw_rule_in_channels_rate(struct snd_pcm_hw_params *params, .max = hdsp->qs_in_channels, .integer = 1, }; - return snd_interval_refine(c, &t); + return snd_interval_refine(c, &t); } else if (r->min > 48000 && r->max <= 96000) { struct snd_interval t = { .min = hdsp->ds_in_channels, @@ -4222,7 +4222,7 @@ static int snd_hdsp_hw_rule_out_channels_rate(struct snd_pcm_hw_params *params, .max = hdsp->qs_out_channels, .integer = 1, }; - return snd_interval_refine(c, &t); + return snd_interval_refine(c, &t); } else if (r->min > 48000 && r->max <= 96000) { struct snd_interval t = { .min = hdsp->ds_out_channels, @@ -4339,8 +4339,8 @@ static int snd_hdsp_playback_open(struct snd_pcm_substream *substream) if (hdsp->io_type == H9632) { runtime->hw.channels_min = hdsp->qs_out_channels; runtime->hw.channels_max = hdsp->ss_out_channels; - } - + } + snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, snd_hdsp_hw_rule_out_channels, hdsp, SNDRV_PCM_HW_PARAM_CHANNELS, -1); @@ -4550,7 +4550,7 @@ static int hdsp_get_peak(struct hdsp *hdsp, struct hdsp_peak_rms __user *peak_rm hdsp->iobase + HDSP_playbackRmsLevel + i * 8 + 4, hdsp->iobase + HDSP_playbackRmsLevel + i * 8)) return -EFAULT; - if (copy_u64_le(&peak_rms->input_rms[i], + if (copy_u64_le(&peak_rms->input_rms[i], hdsp->iobase + HDSP_inputRmsLevel + i * 8 + 4, hdsp->iobase + HDSP_inputRmsLevel + i * 8)) return -EFAULT; @@ -4560,7 +4560,7 @@ static int hdsp_get_peak(struct hdsp *hdsp, struct hdsp_peak_rms __user *peak_rm static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigned int cmd, unsigned long arg) { - struct hdsp *hdsp = (struct hdsp *)hw->private_data; + struct hdsp *hdsp = (struct hdsp *)hw->private_data; void __user *argp = (void __user *)arg; int err; @@ -4594,7 +4594,7 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne struct hdsp_config_info info; unsigned long flags; int i; - + err = hdsp_check_for_iobox(hdsp); if (err < 0) return err; @@ -4628,7 +4628,7 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne info.ad_gain = (unsigned char)hdsp_ad_gain(hdsp); info.phone_gain = (unsigned char)hdsp_phone_gain(hdsp); info.xlr_breakout_cable = (unsigned char)hdsp_xlr_breakout_cable(hdsp); - + } if (hdsp->io_type == H9632 || hdsp->io_type == H9652) info.analog_extension_board = (unsigned char)hdsp_aeb(hdsp); @@ -4639,7 +4639,7 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne } case SNDRV_HDSP_IOCTL_GET_9632_AEB: { struct hdsp_9632_aeb h9632_aeb; - + if (hdsp->io_type != H9632) return -EINVAL; h9632_aeb.aebi = hdsp->ss_in_channels - H9632_SS_CHANNELS; h9632_aeb.aebo = hdsp->ss_out_channels - H9632_SS_CHANNELS; @@ -4650,7 +4650,7 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne case SNDRV_HDSP_IOCTL_GET_VERSION: { struct hdsp_version hdsp_version; int err; - + if (hdsp->io_type == H9652 || hdsp->io_type == H9632) return -EINVAL; if (hdsp->io_type == Undefined) { if ((err = hdsp_get_iobox_version(hdsp)) < 0) @@ -4666,7 +4666,7 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne struct hdsp_firmware __user *firmware; u32 __user *firmware_data; int err; - + if (hdsp->io_type == H9652 || hdsp->io_type == H9632) return -EINVAL; /* SNDRV_HDSP_IOCTL_GET_VERSION must have been called */ if (hdsp->io_type == Undefined) return -EINVAL; @@ -4679,25 +4679,25 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne if (get_user(firmware_data, &firmware->firmware_data)) return -EFAULT; - + if (hdsp_check_for_iobox (hdsp)) return -EIO; if (copy_from_user(hdsp->firmware_cache, firmware_data, sizeof(hdsp->firmware_cache)) != 0) return -EFAULT; - + hdsp->state |= HDSP_FirmwareCached; if ((err = snd_hdsp_load_firmware_from_cache(hdsp)) < 0) return err; - + if (!(hdsp->state & HDSP_InitializationComplete)) { if ((err = snd_hdsp_enable_io(hdsp)) < 0) return err; - - snd_hdsp_initialize_channels(hdsp); + + snd_hdsp_initialize_channels(hdsp); snd_hdsp_initialize_midi_flush(hdsp); - + if ((err = snd_hdsp_create_alsa_devices(hdsp->card, hdsp)) < 0) { snd_printk(KERN_ERR "Hammerfall-DSP: error creating alsa devices\n"); return err; @@ -4744,16 +4744,16 @@ static int snd_hdsp_create_hwdep(struct snd_card *card, struct hdsp *hdsp) { struct snd_hwdep *hw; int err; - + if ((err = snd_hwdep_new(card, "HDSP hwdep", 0, &hw)) < 0) return err; - + hdsp->hwdep = hw; hw->private_data = hdsp; strcpy(hw->name, "HDSP hwdep interface"); hw->ops.ioctl = snd_hdsp_hwdep_ioctl; - + return 0; } @@ -4786,24 +4786,24 @@ static void snd_hdsp_9652_enable_mixer (struct hdsp *hdsp) static int snd_hdsp_enable_io (struct hdsp *hdsp) { int i; - + if (hdsp_fifo_wait (hdsp, 0, 100)) { snd_printk(KERN_ERR "Hammerfall-DSP: enable_io fifo_wait failed\n"); return -EIO; } - + for (i = 0; i < hdsp->max_channels; ++i) { hdsp_write (hdsp, HDSP_inputEnable + (4 * i), 1); hdsp_write (hdsp, HDSP_outputEnable + (4 * i), 1); } - + return 0; } static void snd_hdsp_initialize_channels(struct hdsp *hdsp) { int status, aebi_channels, aebo_channels; - + switch (hdsp->io_type) { case Digiface: hdsp->card_name = "RME Hammerfall DSP + Digiface"; @@ -4816,7 +4816,7 @@ static void snd_hdsp_initialize_channels(struct hdsp *hdsp) hdsp->ss_in_channels = hdsp->ss_out_channels = H9652_SS_CHANNELS; hdsp->ds_in_channels = hdsp->ds_out_channels = H9652_DS_CHANNELS; break; - + case H9632: status = hdsp_read(hdsp, HDSP_statusRegister); /* HDSP_AEBx bits are low when AEB are connected */ @@ -4836,7 +4836,7 @@ static void snd_hdsp_initialize_channels(struct hdsp *hdsp) hdsp->ss_in_channels = hdsp->ss_out_channels = MULTIFACE_SS_CHANNELS; hdsp->ds_in_channels = hdsp->ds_out_channels = MULTIFACE_DS_CHANNELS; break; - + default: /* should never get here */ break; @@ -4852,12 +4852,12 @@ static void snd_hdsp_initialize_midi_flush (struct hdsp *hdsp) static int snd_hdsp_create_alsa_devices(struct snd_card *card, struct hdsp *hdsp) { int err; - + if ((err = snd_hdsp_create_pcm(card, hdsp)) < 0) { snd_printk(KERN_ERR "Hammerfall-DSP: Error creating pcm interface\n"); return err; } - + if ((err = snd_hdsp_create_midi(card, hdsp, 0)) < 0) { snd_printk(KERN_ERR "Hammerfall-DSP: Error creating first midi interface\n"); @@ -4888,19 +4888,19 @@ static int snd_hdsp_create_alsa_devices(struct snd_card *card, struct hdsp *hdsp snd_printk(KERN_ERR "Hammerfall-DSP: Error setting default values\n"); return err; } - + if (!(hdsp->state & HDSP_InitializationComplete)) { strcpy(card->shortname, "Hammerfall DSP"); - sprintf(card->longname, "%s at 0x%lx, irq %d", hdsp->card_name, + sprintf(card->longname, "%s at 0x%lx, irq %d", hdsp->card_name, hdsp->port, hdsp->irq); - + if ((err = snd_card_register(card)) < 0) { snd_printk(KERN_ERR "Hammerfall-DSP: error registering card\n"); return err; } hdsp->state |= HDSP_InitializationComplete; } - + return 0; } @@ -4911,7 +4911,7 @@ static int hdsp_request_fw_loader(struct hdsp *hdsp) const char *fwfile; const struct firmware *fw; int err; - + if (hdsp->io_type == H9652 || hdsp->io_type == H9632) return 0; if (hdsp->io_type == Undefined) { @@ -4920,7 +4920,7 @@ static int hdsp_request_fw_loader(struct hdsp *hdsp) if (hdsp->io_type == H9652 || hdsp->io_type == H9632) return 0; } - + /* caution: max length of firmware filename is 30! */ switch (hdsp->io_type) { case Multiface: @@ -4954,12 +4954,12 @@ static int hdsp_request_fw_loader(struct hdsp *hdsp) memcpy(hdsp->firmware_cache, fw->data, sizeof(hdsp->firmware_cache)); release_firmware(fw); - + hdsp->state |= HDSP_FirmwareCached; if ((err = snd_hdsp_load_firmware_from_cache(hdsp)) < 0) return err; - + if (!(hdsp->state & HDSP_InitializationComplete)) { if ((err = snd_hdsp_enable_io(hdsp)) < 0) return err; @@ -5006,14 +5006,14 @@ static int __devinit snd_hdsp_create(struct snd_card *card, hdsp->max_channels = 26; hdsp->card = card; - + spin_lock_init(&hdsp->lock); tasklet_init(&hdsp->midi_tasklet, hdsp_midi_tasklet, (unsigned long)hdsp); - + pci_read_config_word(hdsp->pci, PCI_CLASS_REVISION, &hdsp->firmware_rev); hdsp->firmware_rev &= 0xff; - + /* From Martin Bjoernsen : "It is important that the card's latency timer register in the PCI configuration space is set to a value much larger @@ -5022,7 +5022,7 @@ static int __devinit snd_hdsp_create(struct snd_card *card, to its maximum 255 to avoid problems with some computers." */ pci_write_config_byte(hdsp->pci, PCI_LATENCY_TIMER, 0xFF); - + strcpy(card->driver, "H-DSP"); strcpy(card->mixername, "Xilinx FPGA"); @@ -5036,7 +5036,7 @@ static int __devinit snd_hdsp_create(struct snd_card *card, } else { hdsp->card_name = "RME HDSP 9632"; hdsp->max_channels = 16; - is_9632 = 1; + is_9632 = 1; } if ((err = pci_enable_device(pci)) < 0) @@ -5065,7 +5065,7 @@ static int __devinit snd_hdsp_create(struct snd_card *card, if ((err = snd_hdsp_initialize_memory(hdsp)) < 0) return err; - + if (!is_9652 && !is_9632) { /* we wait a maximum of 10 seconds to let freshly * inserted cardbus cards do their hardware init */ @@ -5092,35 +5092,35 @@ static int __devinit snd_hdsp_create(struct snd_card *card, return err; return 0; } else { - snd_printk(KERN_INFO "Hammerfall-DSP: Firmware already present, initializing card.\n"); + snd_printk(KERN_INFO "Hammerfall-DSP: Firmware already present, initializing card.\n"); if (hdsp_read(hdsp, HDSP_status2Register) & HDSP_version1) hdsp->io_type = Multiface; - else + else hdsp->io_type = Digiface; } } - + if ((err = snd_hdsp_enable_io(hdsp)) != 0) return err; - + if (is_9652) hdsp->io_type = H9652; - + if (is_9632) hdsp->io_type = H9632; if ((err = snd_hdsp_create_hwdep(card, hdsp)) < 0) return err; - + snd_hdsp_initialize_channels(hdsp); snd_hdsp_initialize_midi_flush(hdsp); - hdsp->state |= HDSP_FirmwareLoaded; + hdsp->state |= HDSP_FirmwareLoaded; if ((err = snd_hdsp_create_alsa_devices(card, hdsp)) < 0) return err; - return 0; + return 0; } static int snd_hdsp_free(struct hdsp *hdsp) @@ -5136,13 +5136,13 @@ static int snd_hdsp_free(struct hdsp *hdsp) free_irq(hdsp->irq, (void *)hdsp); snd_hdsp_free_buffers(hdsp); - + if (hdsp->iobase) iounmap(hdsp->iobase); if (hdsp->port) pci_release_regions(hdsp->pci); - + pci_disable_device(hdsp->pci); return 0; } @@ -5187,7 +5187,7 @@ static int __devinit snd_hdsp_probe(struct pci_dev *pci, } strcpy(card->shortname, "Hammerfall DSP"); - sprintf(card->longname, "%s at 0x%lx, irq %d", hdsp->card_name, + sprintf(card->longname, "%s at 0x%lx, irq %d", hdsp->card_name, hdsp->port, hdsp->irq); if ((err = snd_card_register(card)) < 0) { -- cgit v1.2.3 From c17a1abae2f29047a0f57324240b01609489261b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 09:28:12 +0100 Subject: ALSA: hda - Use snd_hda_codec_get_pincfg() in the rest places Replace with snd_hda_codec_get_pincfg() in the places where available. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 3 +-- sound/pci/hda/hda_generic.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 6fa871f66a72..8ec2dfca9a6c 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3488,8 +3488,7 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, if (ignore_nids && is_in_nid_list(nid, ignore_nids)) continue; - def_conf = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = snd_hda_codec_get_pincfg(codec, nid); if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) continue; loc = get_defcfg_location(def_conf); diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 65745e96dc70..2c81a683e8f8 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -146,7 +146,7 @@ static int add_new_node(struct hda_codec *codec, struct hda_gspec *spec, hda_nid if (node->type == AC_WID_PIN) { node->pin_caps = snd_hda_param_read(codec, node->nid, AC_PAR_PIN_CAP); node->pin_ctl = snd_hda_codec_read(codec, node->nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - node->def_cfg = snd_hda_codec_read(codec, node->nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + node->def_cfg = snd_hda_codec_get_pincfg(codec, node->nid); } if (node->wid_caps & AC_WCAP_OUT_AMP) { -- cgit v1.2.3 From 346ff70fdbe9093947b9494fe714c89cafcceade Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 09:42:57 +0100 Subject: ALSA: hda - Rename {override,cur}_pin with {user,driver}_pin Rename from override_pin and cur_pin with user_pin and driver_pin, respectively, to be a bit more intuitive. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 12 ++++++------ sound/pci/hda/hda_codec.c | 18 +++++++++--------- sound/pci/hda/hda_codec.h | 4 ++-- sound/pci/hda/hda_hwdep.c | 32 ++++++++++++++++---------------- 4 files changed, 33 insertions(+), 33 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 9c51e104546f..f590850c149f 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -371,16 +371,16 @@ hints:: not used. init_pin_configs:: Shows the initial pin default config values set by BIOS. -override_pin_configs:: - Shows the pin default config values to override the BIOS setup. - Writing this (with two numbers, NID and value) appends the new - value. The given will be used instead of the initial BIOS value at - the next reconfiguration time. -cur_pin_configs:: +driver_pin_configs:: Shows the pin default values set by the codec parser explicitly. This doesn't show all pin values but only the changed values by the parser. That is, if the parser doesn't change the pin default config values by itself, this will contain nothing. +user_pin_configs:: + Shows the pin default config values to override the BIOS setup. + Writing this (with two numbers, NID and value) appends the new + value. The given will be used instead of the initial BIOS value at + the next reconfiguration time. reconfig:: Triggers the codec re-configuration. When any value is written to this file, the driver re-initialize and parses the codec tree diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 8ec2dfca9a6c..df9453d0122e 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -755,7 +755,7 @@ int snd_hda_add_pincfg(struct hda_codec *codec, struct snd_array *list, int snd_hda_codec_set_pincfg(struct hda_codec *codec, hda_nid_t nid, unsigned int cfg) { - return snd_hda_add_pincfg(codec, &codec->cur_pins, nid, cfg); + return snd_hda_add_pincfg(codec, &codec->driver_pins, nid, cfg); } EXPORT_SYMBOL_HDA(snd_hda_codec_set_pincfg); @@ -764,11 +764,11 @@ unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid) { struct hda_pincfg *pin; - pin = look_up_pincfg(codec, &codec->cur_pins, nid); + pin = look_up_pincfg(codec, &codec->driver_pins, nid); if (pin) return pin->cfg; #ifdef CONFIG_SND_HDA_HWDEP - pin = look_up_pincfg(codec, &codec->override_pins, nid); + pin = look_up_pincfg(codec, &codec->user_pins, nid); if (pin) return pin->cfg; #endif @@ -797,12 +797,12 @@ static void free_hda_cache(struct hda_cache_rec *cache); /* restore the initial pin cfgs and release all pincfg lists */ static void restore_init_pincfgs(struct hda_codec *codec) { - /* first free cur_pins and override_pins, then call restore_pincfg + /* first free driver_pins and user_pins, then call restore_pincfg * so that only the values in init_pins are restored */ - snd_array_free(&codec->cur_pins); + snd_array_free(&codec->driver_pins); #ifdef CONFIG_SND_HDA_HWDEP - snd_array_free(&codec->override_pins); + snd_array_free(&codec->user_pins); #endif restore_pincfgs(codec); snd_array_free(&codec->init_pins); @@ -874,7 +874,7 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head)); snd_array_init(&codec->mixers, sizeof(struct snd_kcontrol *), 32); snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16); - snd_array_init(&codec->cur_pins, sizeof(struct hda_pincfg), 16); + snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16); if (codec->bus->modelname) { codec->modelname = kstrdup(codec->bus->modelname, GFP_KERNEL); if (!codec->modelname) { @@ -1463,8 +1463,8 @@ void snd_hda_codec_reset(struct hda_codec *codec) free_hda_cache(&codec->cmd_cache); init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info)); init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head)); - /* free only cur_pins so that init_pins + override_pins are restored */ - snd_array_free(&codec->cur_pins); + /* free only driver_pins so that init_pins + user_pins are restored */ + snd_array_free(&codec->driver_pins); restore_pincfgs(codec); codec->num_pcms = 0; codec->pcm_info = NULL; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 6d01a8058f0a..2ea628478a91 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -779,13 +779,13 @@ struct hda_codec { unsigned int spdif_in_enable; /* SPDIF input enable? */ hda_nid_t *slave_dig_outs; /* optional digital out slave widgets */ struct snd_array init_pins; /* initial (BIOS) pin configurations */ - struct snd_array cur_pins; /* current pin configurations */ + struct snd_array driver_pins; /* pin configs set by codec parser */ #ifdef CONFIG_SND_HDA_HWDEP struct snd_hwdep *hwdep; /* assigned hwdep device */ struct snd_array init_verbs; /* additional init verbs */ struct snd_array hints; /* additional hints */ - struct snd_array override_pins; /* default pin configs to override */ + struct snd_array user_pins; /* default pin configs to override */ #endif /* misc flags */ diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 71039a6dec28..c660383ef381 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -109,7 +109,7 @@ static void clear_hwdep_elements(struct hda_codec *codec) for (i = 0; i < codec->hints.used; i++, head++) kfree(*head); snd_array_free(&codec->hints); - snd_array_free(&codec->override_pins); + snd_array_free(&codec->user_pins); } static void hwdep_free(struct snd_hwdep *hwdep) @@ -142,7 +142,7 @@ int /*__devinit*/ snd_hda_create_hwdep(struct hda_codec *codec) snd_array_init(&codec->init_verbs, sizeof(struct hda_verb), 32); snd_array_init(&codec->hints, sizeof(char *), 32); - snd_array_init(&codec->override_pins, sizeof(struct hda_pincfg), 16); + snd_array_init(&codec->user_pins, sizeof(struct hda_pincfg), 16); return 0; } @@ -340,29 +340,29 @@ static ssize_t init_pin_configs_show(struct device *dev, return pin_configs_show(codec, &codec->init_pins, buf); } -static ssize_t override_pin_configs_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t user_pin_configs_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct snd_hwdep *hwdep = dev_get_drvdata(dev); struct hda_codec *codec = hwdep->private_data; - return pin_configs_show(codec, &codec->override_pins, buf); + return pin_configs_show(codec, &codec->user_pins, buf); } -static ssize_t cur_pin_configs_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t driver_pin_configs_show(struct device *dev, + struct device_attribute *attr, + char *buf) { struct snd_hwdep *hwdep = dev_get_drvdata(dev); struct hda_codec *codec = hwdep->private_data; - return pin_configs_show(codec, &codec->cur_pins, buf); + return pin_configs_show(codec, &codec->driver_pins, buf); } #define MAX_PIN_CONFIGS 32 -static ssize_t override_pin_configs_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t user_pin_configs_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct snd_hwdep *hwdep = dev_get_drvdata(dev); struct hda_codec *codec = hwdep->private_data; @@ -373,7 +373,7 @@ static ssize_t override_pin_configs_store(struct device *dev, return -EINVAL; if (!nid) return -EINVAL; - err = snd_hda_add_pincfg(codec, &codec->override_pins, nid, cfg); + err = snd_hda_add_pincfg(codec, &codec->user_pins, nid, cfg); if (err < 0) return err; return count; @@ -397,8 +397,8 @@ static struct device_attribute codec_attrs[] = { CODEC_ATTR_WO(init_verbs), CODEC_ATTR_WO(hints), CODEC_ATTR_RO(init_pin_configs), - CODEC_ATTR_RW(override_pin_configs), - CODEC_ATTR_RO(cur_pin_configs), + CODEC_ATTR_RW(user_pin_configs), + CODEC_ATTR_RO(driver_pin_configs), CODEC_ATTR_WO(reconfig), CODEC_ATTR_WO(clear), }; -- cgit v1.2.3 From 5e7b8e0d87091ae21b291588817b5359a5e00795 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 09:45:59 +0100 Subject: ALSA: hda - Make user_pin overriding the driver setup Make user_pin overriding even the driver pincfg, e.g. the static / fixed pin config table in patch_sigmatel.c. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 3 ++- sound/pci/hda/hda_codec.c | 16 ++++++++++++---- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index f590850c149f..a4e5ef87af6b 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -380,7 +380,8 @@ user_pin_configs:: Shows the pin default config values to override the BIOS setup. Writing this (with two numbers, NID and value) appends the new value. The given will be used instead of the initial BIOS value at - the next reconfiguration time. + the next reconfiguration time. Note that this config will override + even the driver pin configs, too. reconfig:: Triggers the codec re-configuration. When any value is written to this file, the driver re-initialize and parses the codec tree diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index df9453d0122e..a13480fa8e74 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -739,7 +739,9 @@ int snd_hda_add_pincfg(struct hda_codec *codec, struct snd_array *list, hda_nid_t nid, unsigned int cfg) { struct hda_pincfg *pin; + unsigned int oldcfg; + oldcfg = snd_hda_codec_get_pincfg(codec, nid); pin = look_up_pincfg(codec, list, nid); if (!pin) { pin = snd_array_new(list); @@ -748,7 +750,13 @@ int snd_hda_add_pincfg(struct hda_codec *codec, struct snd_array *list, pin->nid = nid; } pin->cfg = cfg; - set_pincfg(codec, nid, cfg); + + /* change only when needed; e.g. if the pincfg is already present + * in user_pins[], don't write it + */ + cfg = snd_hda_codec_get_pincfg(codec, nid); + if (oldcfg != cfg) + set_pincfg(codec, nid, cfg); return 0; } @@ -764,14 +772,14 @@ unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid) { struct hda_pincfg *pin; - pin = look_up_pincfg(codec, &codec->driver_pins, nid); - if (pin) - return pin->cfg; #ifdef CONFIG_SND_HDA_HWDEP pin = look_up_pincfg(codec, &codec->user_pins, nid); if (pin) return pin->cfg; #endif + pin = look_up_pincfg(codec, &codec->driver_pins, nid); + if (pin) + return pin->cfg; pin = look_up_pincfg(codec, &codec->init_pins, nid); if (pin) return pin->cfg; -- cgit v1.2.3 From 13c989beba166b470b1e6b0fa117148bcbfa3dd1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 11:33:34 +0100 Subject: ALSA: hda - Don't give over 0dB volume for AD1984A HP laptops Set the upper limit 0dB to the volume of mixer amp 0x20 for AD1984A HP laptops. The overloaded volume may damage the internal speaker. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 2c58d7b05aba..b16802841468 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3986,6 +3986,14 @@ static int patch_ad1884a(struct hda_codec *codec) spec->multiout.dig_out_nid = 0; codec->patch_ops.unsol_event = ad1884a_hp_unsol_event; codec->patch_ops.init = ad1884a_hp_init; + /* set the upper-limit for mixer amp to 0dB for avoiding the + * possible damage by overloading + */ + snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT, + (0x17 << AC_AMPCAP_OFFSET_SHIFT) | + (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) | + (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | + (1 << AC_AMPCAP_MUTE_SHIFT)); break; case AD1884A_THINKPAD: spec->mixers[0] = ad1984a_thinkpad_mixers; -- cgit v1.2.3 From 39c2871eeaeeddcbecee29ec905ec528a057ca52 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 14:14:51 +0100 Subject: ALSA: hda - Add an example about pin reconfiguration Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index a4e5ef87af6b..99958be7b454 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -391,6 +391,14 @@ clear:: Resets the codec, removes the mixer elements and PCM stuff of the specified codec, and clear all init verbs and hints. +For example, when you want to change the pin default configuration +value of the pin widget 0x14 to 0x9993013f, and let the driver +re-configure based on that state, run like below: +------------------------------------------------------------------------ + # echo 0x14 0x9993013f > /sys/class/sound/hwC0D0/user_pin_configs + # echo 1 > /sys/class/sound/hwC0D0/reconfig +------------------------------------------------------------------------ + Power-Saving ~~~~~~~~~~~~ -- cgit v1.2.3 From a65d629ceb4cff5e7d5edadfd6bf1f64c370a517 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 16:57:04 +0100 Subject: ALSA: hda - Add pseudo device-locking for clear/reconfig Added the pseudo device-locking using card->shutdown flag to avoid the crash via clear/reconfig during operations. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 54 +++++++++++++++++++++++++++++++++++++++++++---- sound/pci/hda/hda_hwdep.c | 15 +++++++++++-- sound/pci/hda/hda_local.h | 2 +- 3 files changed, 64 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a13480fa8e74..5dceee8a113b 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1445,9 +1445,52 @@ void snd_hda_ctls_clear(struct hda_codec *codec) snd_array_free(&codec->mixers); } -void snd_hda_codec_reset(struct hda_codec *codec) +/* pseudo device locking + * toggle card->shutdown to allow/disallow the device access (as a hack) + */ +static int hda_lock_devices(struct snd_card *card) { - int i; + spin_lock(&card->files_lock); + if (card->shutdown) { + spin_unlock(&card->files_lock); + return -EINVAL; + } + card->shutdown = 1; + spin_unlock(&card->files_lock); + return 0; +} + +static void hda_unlock_devices(struct snd_card *card) +{ + spin_lock(&card->files_lock); + card->shutdown = 0; + spin_unlock(&card->files_lock); +} + +int snd_hda_codec_reset(struct hda_codec *codec) +{ + struct snd_card *card = codec->bus->card; + int i, pcm; + + if (hda_lock_devices(card) < 0) + return -EBUSY; + /* check whether the codec isn't used by any mixer or PCM streams */ + if (!list_empty(&card->ctl_files)) { + hda_unlock_devices(card); + return -EBUSY; + } + for (pcm = 0; pcm < codec->num_pcms; pcm++) { + struct hda_pcm *cpcm = &codec->pcm_info[pcm]; + if (!cpcm->pcm) + continue; + if (cpcm->pcm->streams[0].substream_opened || + cpcm->pcm->streams[1].substream_opened) { + hda_unlock_devices(card); + return -EBUSY; + } + } + + /* OK, let it free */ #ifdef CONFIG_SND_HDA_POWER_SAVE cancel_delayed_work(&codec->power_work); @@ -1457,8 +1500,7 @@ void snd_hda_codec_reset(struct hda_codec *codec) /* relase PCMs */ for (i = 0; i < codec->num_pcms; i++) { if (codec->pcm_info[i].pcm) { - snd_device_free(codec->bus->card, - codec->pcm_info[i].pcm); + snd_device_free(card, codec->pcm_info[i].pcm); clear_bit(codec->pcm_info[i].device, codec->bus->pcm_dev_bits); } @@ -1479,6 +1521,10 @@ void snd_hda_codec_reset(struct hda_codec *codec) codec->preset = NULL; module_put(codec->owner); codec->owner = NULL; + + /* allow device access again */ + hda_unlock_devices(card); + return 0; } #endif /* CONFIG_SND_HDA_RECONFIG */ diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index c660383ef381..4af484b8240c 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -155,7 +155,13 @@ int /*__devinit*/ snd_hda_create_hwdep(struct hda_codec *codec) static int clear_codec(struct hda_codec *codec) { - snd_hda_codec_reset(codec); + int err; + + err = snd_hda_codec_reset(codec); + if (err < 0) { + snd_printk(KERN_ERR "The codec is being used, can't free.\n"); + return err; + } clear_hwdep_elements(codec); return 0; } @@ -165,7 +171,12 @@ static int reconfig_codec(struct hda_codec *codec) int err; snd_printk(KERN_INFO "hda-codec: reconfiguring\n"); - snd_hda_codec_reset(codec); + err = snd_hda_codec_reset(codec); + if (err < 0) { + snd_printk(KERN_ERR + "The codec is being used, can't reconfigure.\n"); + return err; + } err = snd_hda_codec_configure(codec); if (err < 0) return err; diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 84e2cf644fd7..4bd82a37a4c8 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -98,7 +98,7 @@ struct snd_kcontrol *snd_hda_find_mixer_ctl(struct hda_codec *codec, const char *name); int snd_hda_add_vmaster(struct hda_codec *codec, char *name, unsigned int *tlv, const char **slaves); -void snd_hda_codec_reset(struct hda_codec *codec); +int snd_hda_codec_reset(struct hda_codec *codec); int snd_hda_codec_configure(struct hda_codec *codec); /* amp value bits */ -- cgit v1.2.3 From 0af98d37e85e6958eb84987b1f60da3b54008317 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Sun, 8 Feb 2009 16:44:42 +0100 Subject: [WATCHDOG] rc32434_wdt: fix watchdog driver The existing driver code wasn't working. Neither the timeout was set correctly, nor system reset was being triggered, as the driver seemed to keep the WDT alive himself. There was also some unnecessary code. Signed-off-by: Phil Sutter Signed-off-by: Wim Van Sebroeck Cc: stable --- drivers/watchdog/rc32434_wdt.c | 158 +++++++++++++++++------------------------ 1 file changed, 64 insertions(+), 94 deletions(-) diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index 57027f4653ce..f1f98cd757c6 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -34,104 +34,89 @@ #include #include -#define MAX_TIMEOUT 20 -#define RC32434_WDT_INTERVAL (15 * HZ) - -#define VERSION "0.2" +#define VERSION "0.3" static struct { - struct completion stop; - int running; - struct timer_list timer; - int queue; - int default_ticks; unsigned long inuse; } rc32434_wdt_device; static struct integ __iomem *wdt_reg; -static int ticks = 100 * HZ; static int expect_close; -static int timeout; + +/* Board internal clock speed in Hz, + * the watchdog timer ticks at. */ +extern unsigned int idt_cpu_freq; + +/* translate wtcompare value to seconds and vice versa */ +#define WTCOMP2SEC(x) (x / idt_cpu_freq) +#define SEC2WTCOMP(x) (x * idt_cpu_freq) + +/* Use a default timeout of 20s. This should be + * safe for CPU clock speeds up to 400MHz, as + * ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */ +#define WATCHDOG_TIMEOUT 20 + +static int timeout = WATCHDOG_TIMEOUT; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +/* apply or and nand masks to data read from addr and write back */ +#define SET_BITS(addr, or, nand) \ + writel((readl(&addr) | or) & ~nand, &addr) static void rc32434_wdt_start(void) { - u32 val; - - if (!rc32434_wdt_device.inuse) { - writel(0, &wdt_reg->wtcount); + u32 or, nand; - val = RC32434_ERR_WRE; - writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs); + /* zero the counter before enabling */ + writel(0, &wdt_reg->wtcount); - val = RC32434_WTC_EN; - writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc); - } - rc32434_wdt_device.running++; -} + /* don't generate a non-maskable interrupt, + * do a warm reset instead */ + nand = 1 << RC32434_ERR_WNE; + or = 1 << RC32434_ERR_WRE; -static void rc32434_wdt_stop(void) -{ - u32 val; + /* reset the ERRCS timeout bit in case it's set */ + nand |= 1 << RC32434_ERR_WTO; - if (rc32434_wdt_device.running) { + SET_BITS(wdt_reg->errcs, or, nand); - val = ~RC32434_WTC_EN; - writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc); + /* reset WTC timeout bit and enable WDT */ + nand = 1 << RC32434_WTC_TO; + or = 1 << RC32434_WTC_EN; - val = ~RC32434_ERR_WRE; - writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs); + SET_BITS(wdt_reg->wtc, or, nand); +} - rc32434_wdt_device.running = 0; - } +static void rc32434_wdt_stop(void) +{ + /* Disable WDT */ + SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN); } -static void rc32434_wdt_set(int new_timeout) +static int rc32434_wdt_set(int new_timeout) { - u32 cmp = new_timeout * HZ; - u32 state, val; + int max_to = WTCOMP2SEC((u32)-1); + if (new_timeout < 0 || new_timeout > max_to) { + printk(KERN_ERR KBUILD_MODNAME + ": timeout value must be between 0 and %d", + max_to); + return -EINVAL; + } timeout = new_timeout; - /* - * store and disable WTC - */ - state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN); - val = ~RC32434_WTC_EN; - writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc); - - writel(0, &wdt_reg->wtcount); - writel(cmp, &wdt_reg->wtcompare); - - /* - * restore WTC - */ - - writel(readl(&wdt_reg->wtc) | state, &wdt_reg); -} + writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare); -static void rc32434_wdt_reset(void) -{ - ticks = rc32434_wdt_device.default_ticks; + return 0; } -static void rc32434_wdt_update(unsigned long unused) +static void rc32434_wdt_ping(void) { - if (rc32434_wdt_device.running) - ticks--; - writel(0, &wdt_reg->wtcount); - - if (rc32434_wdt_device.queue && ticks) - mod_timer(&rc32434_wdt_device.timer, - jiffies + RC32434_WDT_INTERVAL); - else - complete(&rc32434_wdt_device.stop); } static int rc32434_wdt_open(struct inode *inode, struct file *file) @@ -142,19 +127,23 @@ static int rc32434_wdt_open(struct inode *inode, struct file *file) if (nowayout) __module_get(THIS_MODULE); + rc32434_wdt_start(); + rc32434_wdt_ping(); + return nonseekable_open(inode, file); } static int rc32434_wdt_release(struct inode *inode, struct file *file) { - if (expect_close && nowayout == 0) { + if (expect_close == 42) { rc32434_wdt_stop(); printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n"); module_put(THIS_MODULE); - } else + } else { printk(KERN_CRIT KBUILD_MODNAME ": device closed unexpectedly. WDT will not stop !\n"); - + rc32434_wdt_ping(); + } clear_bit(0, &rc32434_wdt_device.inuse); return 0; } @@ -174,10 +163,10 @@ static ssize_t rc32434_wdt_write(struct file *file, const char *data, if (get_user(c, data + i)) return -EFAULT; if (c == 'V') - expect_close = 1; + expect_close = 42; } } - rc32434_wdt_update(0); + rc32434_wdt_ping(); return len; } return 0; @@ -197,11 +186,11 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { case WDIOC_KEEPALIVE: - rc32434_wdt_reset(); + rc32434_wdt_ping(); break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - value = readl(&wdt_reg->wtcount); + value = 0; if (copy_to_user(argp, &value, sizeof(int))) return -EFAULT; break; @@ -218,6 +207,7 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, break; case WDIOS_DISABLECARD: rc32434_wdt_stop(); + break; default: return -EINVAL; } @@ -225,11 +215,9 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_SETTIMEOUT: if (copy_from_user(&new_timeout, argp, sizeof(int))) return -EFAULT; - if (new_timeout < 1) + if (rc32434_wdt_set(new_timeout)) return -EINVAL; - if (new_timeout > MAX_TIMEOUT) - return -EINVAL; - rc32434_wdt_set(new_timeout); + /* Fall through */ case WDIOC_GETTIMEOUT: return copy_to_user(argp, &timeout, sizeof(int)); default: @@ -262,7 +250,7 @@ static int rc32434_wdt_probe(struct platform_device *pdev) int ret; struct resource *r; - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res"); + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res"); if (!r) { printk(KERN_ERR KBUILD_MODNAME "failed to retrieve resources\n"); @@ -277,24 +265,12 @@ static int rc32434_wdt_probe(struct platform_device *pdev) } ret = misc_register(&rc32434_wdt_miscdev); - if (ret < 0) { printk(KERN_ERR KBUILD_MODNAME "failed to register watchdog device\n"); goto unmap; } - init_completion(&rc32434_wdt_device.stop); - rc32434_wdt_device.queue = 0; - - clear_bit(0, &rc32434_wdt_device.inuse); - - setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L); - - rc32434_wdt_device.default_ticks = ticks; - - rc32434_wdt_start(); - printk(banner, timeout); return 0; @@ -306,14 +282,8 @@ unmap: static int rc32434_wdt_remove(struct platform_device *pdev) { - if (rc32434_wdt_device.queue) { - rc32434_wdt_device.queue = 0; - wait_for_completion(&rc32434_wdt_device.stop); - } misc_deregister(&rc32434_wdt_miscdev); - iounmap(wdt_reg); - return 0; } -- cgit v1.2.3 From d9a8798c4bab5ccd40e45e011f668099cfb3eb83 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Sun, 8 Feb 2009 16:44:42 +0100 Subject: [WATCHDOG] rc32434_wdt: fix sections Fix init and exit sections. Signed-off-by: Phil Sutter Signed-off-by: Wim Van Sebroeck Cc: stable --- drivers/watchdog/rc32434_wdt.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index f1f98cd757c6..f3553fa40b17 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -34,7 +34,7 @@ #include #include -#define VERSION "0.3" +#define VERSION "0.4" static struct { unsigned long inuse; @@ -242,10 +242,10 @@ static struct miscdevice rc32434_wdt_miscdev = { .fops = &rc32434_wdt_fops, }; -static char banner[] = KERN_INFO KBUILD_MODNAME +static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME ": Watchdog Timer version " VERSION ", timer margin: %d sec\n"; -static int rc32434_wdt_probe(struct platform_device *pdev) +static int __devinit rc32434_wdt_probe(struct platform_device *pdev) { int ret; struct resource *r; @@ -280,7 +280,7 @@ unmap: return ret; } -static int rc32434_wdt_remove(struct platform_device *pdev) +static int __devexit rc32434_wdt_remove(struct platform_device *pdev) { misc_deregister(&rc32434_wdt_miscdev); iounmap(wdt_reg); @@ -289,8 +289,8 @@ static int rc32434_wdt_remove(struct platform_device *pdev) static struct platform_driver rc32434_wdt = { .probe = rc32434_wdt_probe, - .remove = rc32434_wdt_remove, - .driver = { + .remove = __devexit_p(rc32434_wdt_remove), + .driver = { .name = "rc32434_wdt", } }; -- cgit v1.2.3 From 8056d9bbb57207854462b6b0a3a75d172300cce5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 14:44:54 +0000 Subject: ASoC: Improve WM9713 voice DAC shutdown procedure Signed-off-by: Mark Brown --- sound/soc/codecs/wm9713.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 54db9c524988..a93aea5c1878 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -940,13 +940,14 @@ static void wm9713_voiceshutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_codec *codec = dai->codec; - u16 status; + u16 status, rate; /* Gracefully shut down the voice interface. */ status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000; - ac97_write(codec, AC97_HANDSET_RATE, 0x0280); + rate = ac97_read(codec, AC97_HANDSET_RATE) & 0xF0FF; + ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0200); schedule_timeout_interruptible(msecs_to_jiffies(1)); - ac97_write(codec, AC97_HANDSET_RATE, 0x0F80); + ac97_write(codec, AC97_HANDSET_RATE, rate | 0x0F00); ac97_write(codec, AC97_EXTENDED_MID, status); } -- cgit v1.2.3 From d3b894218441ecb1c83e47c682e2d6589ee37a8d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 23 Feb 2009 18:45:19 +0000 Subject: ASoC: Fix Zylonite voice interface stereo configurations We always run in the first timeslot of one. Signed-off-by: Mark Brown --- sound/soc/pxa/zylonite.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c index ec2fb764b241..0140a250db24 100644 --- a/sound/soc/pxa/zylonite.c +++ b/sound/soc/pxa/zylonite.c @@ -127,9 +127,8 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - ret = snd_soc_dai_set_tdm_slot(cpu_dai, - params_channels(params), - params_channels(params)); + /* We're not really in network mode but the emulation wants this. */ + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 1); if (ret < 0) return ret; -- cgit v1.2.3 From 69e169da5a69cc991d54bb4d54f236523145756c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 22 Feb 2009 14:39:03 +0000 Subject: ASoC: Shuffle WM8753 device registration code This patch should be pure code motion, separating that out from the functional changes to move to new style device registration. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 209 +++++++++++++++++++++++----------------------- 1 file changed, 105 insertions(+), 104 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 93c22c4f0826..4b426888f98d 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -51,6 +51,11 @@ #include "wm8753.h" +#ifdef CONFIG_SPI_MASTER +static struct spi_driver wm8753_spi_driver; +static int wm8753_spi_write(struct spi_device *spi, const char *data, int len); +#endif + static int caps_charge = 2000; module_param(caps_charge, int, 0); MODULE_PARM_DESC(caps_charge, "WM8753 cap charge time (msecs)"); @@ -1626,53 +1631,7 @@ pcm_err: static struct snd_soc_device *wm8753_socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - -/* - * WM8753 2 wire address is determined by GPIO5 - * state during powerup. - * low = 0x1a - * high = 0x1b - */ - -static int wm8753_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct snd_soc_device *socdev = wm8753_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; - - i2c_set_clientdata(i2c, codec); - codec->control_data = i2c; - - ret = wm8753_init(socdev); - if (ret < 0) - pr_err("failed to initialise WM8753\n"); - - return ret; -} - -static int wm8753_i2c_remove(struct i2c_client *client) -{ - struct snd_soc_codec *codec = i2c_get_clientdata(client); - kfree(codec->reg_cache); - return 0; -} - -static const struct i2c_device_id wm8753_i2c_id[] = { - { "wm8753", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, wm8753_i2c_id); - -static struct i2c_driver wm8753_i2c_driver = { - .driver = { - .name = "WM8753 I2C Codec", - .owner = THIS_MODULE, - }, - .probe = wm8753_i2c_probe, - .remove = wm8753_i2c_remove, - .id_table = wm8753_i2c_id, -}; +static struct i2c_driver wm8753_i2c_driver; static int wm8753_add_i2c_device(struct platform_device *pdev, const struct wm8753_setup_data *setup) @@ -1715,63 +1674,6 @@ err_driver: } #endif -#if defined(CONFIG_SPI_MASTER) -static int __devinit wm8753_spi_probe(struct spi_device *spi) -{ - struct snd_soc_device *socdev = wm8753_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; - - codec->control_data = spi; - - ret = wm8753_init(socdev); - if (ret < 0) - dev_err(&spi->dev, "failed to initialise WM8753\n"); - - return ret; -} - -static int __devexit wm8753_spi_remove(struct spi_device *spi) -{ - return 0; -} - -static struct spi_driver wm8753_spi_driver = { - .driver = { - .name = "wm8753", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = wm8753_spi_probe, - .remove = __devexit_p(wm8753_spi_remove), -}; - -static int wm8753_spi_write(struct spi_device *spi, const char *data, int len) -{ - struct spi_transfer t; - struct spi_message m; - u8 msg[2]; - - if (len <= 0) - return 0; - - msg[0] = data[0]; - msg[1] = data[1]; - - spi_message_init(&m); - memset(&t, 0, (sizeof t)); - - t.tx_buf = &msg[0]; - t.len = len; - - spi_message_add_tail(&t, &m); - spi_sync(spi, &m); - - return len; -} -#endif - - static int wm8753_probe(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); @@ -1876,6 +1778,105 @@ struct snd_soc_codec_device soc_codec_dev_wm8753 = { }; EXPORT_SYMBOL_GPL(soc_codec_dev_wm8753); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +static int wm8753_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct snd_soc_device *socdev = wm8753_socdev; + struct snd_soc_codec *codec = socdev->card->codec; + int ret; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = wm8753_init(socdev); + if (ret < 0) + pr_err("failed to initialise WM8753\n"); + + return ret; +} + +static int wm8753_i2c_remove(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + kfree(codec->reg_cache); + return 0; +} + +static const struct i2c_device_id wm8753_i2c_id[] = { + { "wm8753", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8753_i2c_id); + +static struct i2c_driver wm8753_i2c_driver = { + .driver = { + .name = "WM8753 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8753_i2c_probe, + .remove = wm8753_i2c_remove, + .id_table = wm8753_i2c_id, +}; +#endif + +#if defined(CONFIG_SPI_MASTER) +static int wm8753_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} + +static int __devinit wm8753_spi_probe(struct spi_device *spi) +{ + struct snd_soc_device *socdev = wm8753_socdev; + struct snd_soc_codec *codec = socdev->card->codec; + int ret; + + codec->control_data = spi; + + ret = wm8753_init(socdev); + if (ret < 0) + dev_err(&spi->dev, "failed to initialise WM8753\n"); + + return ret; +} + +static int __devexit wm8753_spi_remove(struct spi_device *spi) +{ + return 0; +} + +static struct spi_driver wm8753_spi_driver = { + .driver = { + .name = "wm8753", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8753_spi_probe, + .remove = __devexit_p(wm8753_spi_remove), +}; +#endif + static int __init wm8753_modinit(void) { return snd_soc_register_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai)); -- cgit v1.2.3 From c2bac1606a937d4700f8fdd8e051a4c49593c41b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 Feb 2009 23:33:12 +0000 Subject: ASoC: Convert WM8753 to register via normal device probe The base support for the only in-tree user, the GTA01, is out of tree and will be updated separately. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 369 +++++++++++++++++-------------------- sound/soc/codecs/wm8753.h | 6 - sound/soc/s3c24xx/neo1973_wm8753.c | 6 - 3 files changed, 171 insertions(+), 210 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 4b426888f98d..bc29558149e9 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -63,12 +63,6 @@ MODULE_PARM_DESC(caps_charge, "WM8753 cap charge time (msecs)"); static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode); -/* codec private data */ -struct wm8753_priv { - unsigned int sysclk; - unsigned int pcmclk; -}; - /* * wm8753 register cache * We can't read the WM8753 register space when we @@ -93,6 +87,14 @@ static const u16 wm8753_reg[] = { 0x0000, 0x0000 }; +/* codec private data */ +struct wm8753_priv { + unsigned int sysclk; + unsigned int pcmclk; + struct snd_soc_codec codec; + u16 reg_cache[ARRAY_SIZE(wm8753_reg)]; +}; + /* * read wm8753 register cache */ @@ -1542,36 +1544,24 @@ static int wm8753_resume(struct platform_device *pdev) return 0; } -/* - * initialise the WM8753 driver - * register the mixer and dsp interfaces with the kernel - */ -static int wm8753_init(struct snd_soc_device *socdev) +static struct snd_soc_codec *wm8753_codec; + +static int wm8753_probe(struct platform_device *pdev) { - struct snd_soc_codec *codec = socdev->card->codec; - int reg, ret = 0; + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; - codec->name = "WM8753"; - codec->owner = THIS_MODULE; - codec->read = wm8753_read_reg_cache; - codec->write = wm8753_write; - codec->set_bias_level = wm8753_set_bias_level; - codec->dai = wm8753_dai; - codec->num_dai = 2; - codec->reg_cache_size = ARRAY_SIZE(wm8753_reg); - codec->reg_cache = kmemdup(wm8753_reg, sizeof(wm8753_reg), GFP_KERNEL); + if (!wm8753_codec) { + dev_err(&pdev->dev, "WM8753 codec not yet registered\n"); + return -EINVAL; + } - if (codec->reg_cache == NULL) - return -ENOMEM; + socdev->card->codec = wm8753_codec; + codec = wm8753_codec; wm8753_set_dai_mode(codec, 0); - ret = wm8753_reset(codec); - if (ret < 0) { - printk(KERN_ERR "wm8753: failed to reset device\n"); - return ret; - } - /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { @@ -1579,36 +1569,7 @@ static int wm8753_init(struct snd_soc_device *socdev) goto pcm_err; } - /* charge output caps */ - wm8753_set_bias_level(codec, SND_SOC_BIAS_PREPARE); - codec->bias_level = SND_SOC_BIAS_STANDBY; - schedule_delayed_work(&codec->delayed_work, - msecs_to_jiffies(caps_charge)); - - /* set the update bits */ - reg = wm8753_read_reg_cache(codec, WM8753_LDAC); - wm8753_write(codec, WM8753_LDAC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_RDAC); - wm8753_write(codec, WM8753_RDAC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LADC); - wm8753_write(codec, WM8753_LADC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_RADC); - wm8753_write(codec, WM8753_RADC, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V); - wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V); - wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V); - wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V); - wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_LINVOL); - wm8753_write(codec, WM8753_LINVOL, reg | 0x0100); - reg = wm8753_read_reg_cache(codec, WM8753_RINVOL); - wm8753_write(codec, WM8753_RINVOL, reg | 0x0100); - - snd_soc_add_controls(codec, wm8753_snd_controls, - ARRAY_SIZE(wm8753_snd_controls)); + wm8753_add_controls(codec); wm8753_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { @@ -1616,110 +1577,13 @@ static int wm8753_init(struct snd_soc_device *socdev) goto card_err; } - return ret; + return 0; card_err: snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); -pcm_err: - kfree(codec->reg_cache); - return ret; -} - -/* If the i2c layer weren't so broken, we could pass this kind of data - around */ -static struct snd_soc_device *wm8753_socdev; - -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -static struct i2c_driver wm8753_i2c_driver; - -static int wm8753_add_i2c_device(struct platform_device *pdev, - const struct wm8753_setup_data *setup) -{ - struct i2c_board_info info; - struct i2c_adapter *adapter; - struct i2c_client *client; - int ret; - - ret = i2c_add_driver(&wm8753_i2c_driver); - if (ret != 0) { - dev_err(&pdev->dev, "can't add i2c driver\n"); - return ret; - } - - memset(&info, 0, sizeof(struct i2c_board_info)); - info.addr = setup->i2c_address; - strlcpy(info.type, "wm8753", I2C_NAME_SIZE); - - adapter = i2c_get_adapter(setup->i2c_bus); - if (!adapter) { - dev_err(&pdev->dev, "can't get i2c adapter %d\n", - setup->i2c_bus); - goto err_driver; - } - - client = i2c_new_device(adapter, &info); - i2c_put_adapter(adapter); - if (!client) { - dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", - (unsigned int)info.addr); - goto err_driver; - } - - return 0; - -err_driver: - i2c_del_driver(&wm8753_i2c_driver); - return -ENODEV; -} -#endif - -static int wm8753_probe(struct platform_device *pdev) -{ - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct wm8753_setup_data *setup; - struct snd_soc_codec *codec; - struct wm8753_priv *wm8753; - int ret = 0; - - setup = socdev->codec_data; - codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); - if (codec == NULL) - return -ENOMEM; - - wm8753 = kzalloc(sizeof(struct wm8753_priv), GFP_KERNEL); - if (wm8753 == NULL) { - kfree(codec); - return -ENOMEM; - } - - codec->private_data = wm8753; - socdev->card->codec = codec; - mutex_init(&codec->mutex); - INIT_LIST_HEAD(&codec->dapm_widgets); - INIT_LIST_HEAD(&codec->dapm_paths); - wm8753_socdev = socdev; - INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work); - -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - if (setup->i2c_address) { - codec->hw_write = (hw_write_t)i2c_master_send; - ret = wm8753_add_i2c_device(pdev, setup); - } -#endif -#if defined(CONFIG_SPI_MASTER) - if (setup->spi) { - codec->hw_write = (hw_write_t)wm8753_spi_write; - ret = spi_register_driver(&wm8753_spi_driver); - if (ret != 0) - printk(KERN_ERR "can't add spi driver"); - } -#endif - if (ret != 0) { - kfree(codec->private_data); - kfree(codec); - } +pcm_err: return ret; } @@ -1746,26 +1610,9 @@ static int run_delayed_work(struct delayed_work *dwork) static int wm8753_remove(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_codec *codec = socdev->card->codec; - struct wm8753_setup_data *setup = socdev->codec_data; - if (codec->control_data) - wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF); - run_delayed_work(&codec->delayed_work); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - if (setup->i2c_address) { - i2c_unregister_device(codec->control_data); - i2c_del_driver(&wm8753_i2c_driver); - } -#endif -#if defined(CONFIG_SPI_MASTER) - if (setup->spi) - spi_unregister_driver(&wm8753_spi_driver); -#endif - kfree(codec->private_data); - kfree(codec); return 0; } @@ -1778,30 +1625,134 @@ struct snd_soc_codec_device soc_codec_dev_wm8753 = { }; EXPORT_SYMBOL_GPL(soc_codec_dev_wm8753); +static int wm8753_register(struct wm8753_priv *wm8753) +{ + int ret, i; + struct snd_soc_codec *codec = &wm8753->codec; + u16 reg; + + if (wm8753_codec) { + dev_err(codec->dev, "Multiple WM8753 devices not supported\n"); + ret = -EINVAL; + goto err; + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->name = "WM8753"; + codec->owner = THIS_MODULE; + codec->read = wm8753_read_reg_cache; + codec->write = wm8753_write; + codec->bias_level = SND_SOC_BIAS_STANDBY; + codec->set_bias_level = wm8753_set_bias_level; + codec->dai = wm8753_dai; + codec->num_dai = 2; + codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache); + codec->reg_cache = &wm8753->reg_cache; + codec->private_data = wm8753; + + memcpy(codec->reg_cache, wm8753_reg, sizeof(codec->reg_cache)); + INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work); + + ret = wm8753_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + goto err; + } + + /* charge output caps */ + wm8753_set_bias_level(codec, SND_SOC_BIAS_PREPARE); + schedule_delayed_work(&codec->delayed_work, + msecs_to_jiffies(caps_charge)); + + /* set the update bits */ + reg = wm8753_read_reg_cache(codec, WM8753_LDAC); + wm8753_write(codec, WM8753_LDAC, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_RDAC); + wm8753_write(codec, WM8753_RDAC, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_LADC); + wm8753_write(codec, WM8753_LADC, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_RADC); + wm8753_write(codec, WM8753_RADC, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V); + wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V); + wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V); + wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V); + wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_LINVOL); + wm8753_write(codec, WM8753_LINVOL, reg | 0x0100); + reg = wm8753_read_reg_cache(codec, WM8753_RINVOL); + wm8753_write(codec, WM8753_RINVOL, reg | 0x0100); + + wm8753_codec = codec; + + for (i = 0; i < ARRAY_SIZE(wm8753_dai); i++) + wm8753_dai[i].dev = codec->dev; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + goto err; + } + + ret = snd_soc_register_dais(&wm8753_dai[0], ARRAY_SIZE(wm8753_dai)); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAIs: %d\n", ret); + goto err_codec; + } + + return 0; + +err_codec: + run_delayed_work(&codec->delayed_work); + snd_soc_unregister_codec(codec); +err: + kfree(wm8753); + return ret; +} + +static void wm8753_unregister(struct wm8753_priv *wm8753) +{ + wm8753_set_bias_level(&wm8753->codec, SND_SOC_BIAS_OFF); + run_delayed_work(&wm8753->codec.delayed_work); + snd_soc_unregister_dais(&wm8753_dai[0], ARRAY_SIZE(wm8753_dai)); + snd_soc_unregister_codec(&wm8753->codec); + kfree(wm8753); + wm8753_codec = NULL; +} + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) static int wm8753_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { - struct snd_soc_device *socdev = wm8753_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; + struct snd_soc_codec *codec; + struct wm8753_priv *wm8753; - i2c_set_clientdata(i2c, codec); - codec->control_data = i2c; + wm8753 = kzalloc(sizeof(struct wm8753_priv), GFP_KERNEL); + if (wm8753 == NULL) + return -ENOMEM; - ret = wm8753_init(socdev); - if (ret < 0) - pr_err("failed to initialise WM8753\n"); + codec = &wm8753->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + codec->control_data = i2c; + i2c_set_clientdata(i2c, wm8753); - return ret; + codec->dev = &i2c->dev; + + return wm8753_register(wm8753); } static int wm8753_i2c_remove(struct i2c_client *client) { - struct snd_soc_codec *codec = i2c_get_clientdata(client); - kfree(codec->reg_cache); - return 0; + struct wm8753_priv *wm8753 = i2c_get_clientdata(client); + wm8753_unregister(wm8753); + return 0; } static const struct i2c_device_id wm8753_i2c_id[] = { @@ -1812,7 +1763,7 @@ MODULE_DEVICE_TABLE(i2c, wm8753_i2c_id); static struct i2c_driver wm8753_i2c_driver = { .driver = { - .name = "WM8753 I2C Codec", + .name = "wm8753", .owner = THIS_MODULE, }, .probe = wm8753_i2c_probe, @@ -1848,21 +1799,27 @@ static int wm8753_spi_write(struct spi_device *spi, const char *data, int len) static int __devinit wm8753_spi_probe(struct spi_device *spi) { - struct snd_soc_device *socdev = wm8753_socdev; - struct snd_soc_codec *codec = socdev->card->codec; - int ret; + struct snd_soc_codec *codec; + struct wm8753_priv *wm8753; + + wm8753 = kzalloc(sizeof(struct wm8753_priv), GFP_KERNEL); + if (wm8753 == NULL) + return -ENOMEM; + codec = &wm8753->codec; codec->control_data = spi; + codec->hw_write = (hw_write_t)wm8753_spi_write; + codec->dev = &spi->dev; - ret = wm8753_init(socdev); - if (ret < 0) - dev_err(&spi->dev, "failed to initialise WM8753\n"); + spi->dev.driver_data = wm8753; - return ret; + return wm8753_register(wm8753); } static int __devexit wm8753_spi_remove(struct spi_device *spi) { + struct wm8753_priv *wm8753 = spi->dev.driver_data; + wm8753_unregister(wm8753); return 0; } @@ -1879,13 +1836,29 @@ static struct spi_driver wm8753_spi_driver = { static int __init wm8753_modinit(void) { - return snd_soc_register_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai)); + int ret; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8753_i2c_driver); + if (ret != 0) + pr_err("Failed to register WM8753 I2C driver: %d\n", ret); +#endif +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8753_spi_driver); + if (ret != 0) + pr_err("Failed to register WM8753 SPI driver: %d\n", ret); +#endif + return 0; } module_init(wm8753_modinit); static void __exit wm8753_exit(void) { - snd_soc_unregister_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai)); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8753_i2c_driver); +#endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8753_spi_driver); +#endif } module_exit(wm8753_exit); diff --git a/sound/soc/codecs/wm8753.h b/sound/soc/codecs/wm8753.h index f55704ce931b..57b2ba244040 100644 --- a/sound/soc/codecs/wm8753.h +++ b/sound/soc/codecs/wm8753.h @@ -77,12 +77,6 @@ #define WM8753_BIASCTL 0x3d #define WM8753_ADCTL2 0x3f -struct wm8753_setup_data { - int spi; - int i2c_bus; - unsigned short i2c_address; -}; - #define WM8753_PLL1 0 #define WM8753_PLL2 1 diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 45bb12e8ea44..286e11ad50ea 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -585,15 +585,9 @@ static struct snd_soc_card neo1973 = { .num_links = ARRAY_SIZE(neo1973_dai), }; -static struct wm8753_setup_data neo1973_wm8753_setup = { - .i2c_bus = 0, - .i2c_address = 0x1a, -}; - static struct snd_soc_device neo1973_snd_devdata = { .card = &neo1973, .codec_dev = &soc_codec_dev_wm8753, - .codec_data = &neo1973_wm8753_setup, }; static int lm4857_i2c_probe(struct i2c_client *client, -- cgit v1.2.3 From e611bd82441130991d7f4600dfd4632cebd417c5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 22 Feb 2009 20:04:41 +0000 Subject: ASoC: Only write back non-default registers when resuming WM8753 This will reduce the number of writes done on resume, allowing that to complete faster (especially on systems with very slow I2C like the current Samsung driver). Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index bc29558149e9..2241204b5151 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1526,6 +1526,11 @@ static int wm8753_resume(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) { if (i + 1 == WM8753_RESET) continue; + + /* No point in writing hardware default values back */ + if (cache[i] == wm8753_reg[i]) + continue; + data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001); data[1] = cache[i] & 0x00ff; codec->hw_write(codec->control_data, data, 2); -- cgit v1.2.3 From fff78ad5cee1d6f695103ec590cbd2a9f3c39e8c Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 22:28:42 -0500 Subject: [CPUFREQ] Stupidly trivial CodingStyle fix GNU indent complains about this being ambiguous, because it's dumb. One of my automated tests relies on the output of indent, so this shuts it up. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index 1b446d79a8fd..9cd73d157437 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -94,7 +94,7 @@ static struct cpufreq_frequency_table *powernow_table; static unsigned int can_scale_bus; static unsigned int can_scale_vid; -static unsigned int minimum_speed=-1; +static unsigned int minimum_speed = -1; static unsigned int maximum_speed; static unsigned int number_scales; static unsigned int fsb; -- cgit v1.2.3 From b5c916666240032b29f73a1ca52c3e0fac37335c Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 22:39:47 -0500 Subject: [CPUFREQ] checkpatch cleanups for cpufreq-nforce2 Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 38 +++++++++++++++------------ 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index 965ea52767ac..ad8284f0e865 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -32,7 +32,7 @@ * nforce2_chipset: * FSB is changed using the chipset */ -static struct pci_dev *nforce2_chipset_dev; +static struct pci_dev *nforce2_dev; /* fid: * multiplier * 10 @@ -56,7 +56,8 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, "Minimum FSB to use, if not defined: current FSB - 50"); -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "cpufreq-nforce2", msg) /** * nforce2_calc_fsb - calculate FSB @@ -118,11 +119,11 @@ static void nforce2_write_pll(int pll) int temp; /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0); + pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); /* Now write the value in all 64 registers */ for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); + pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); return; } @@ -139,8 +140,8 @@ static unsigned int nforce2_fsb_read(int bootfsb) u32 fsb, temp = 0; /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -148,13 +149,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (bootfsb || !temp) return fsb; /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -185,7 +186,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -197,7 +198,7 @@ static int nforce2_set_fsb(unsigned int fsb) /* Enable write access */ temp = 0x01; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp); + pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); diff = tfsb - fsb; @@ -222,7 +223,7 @@ static int nforce2_set_fsb(unsigned int fsb) } temp = 0x40; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp); + pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); return 0; } @@ -244,7 +245,8 @@ static unsigned int nforce2_get(unsigned int cpu) * nforce2_target - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ @@ -328,7 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) if (!fid) { if (!cpu_khz) { printk(KERN_WARNING - "cpufreq: cpu_khz not set, can't calculate multiplier!\n"); + "cpufreq: cpu_khz not set, " + "can't calculate multiplier!\n"); return -ENODEV; } @@ -392,17 +395,18 @@ static struct cpufreq_driver nforce2_driver = { */ static unsigned int nforce2_detect_chipset(void) { - nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, PCI_ANY_ID, PCI_ANY_ID, NULL); - if (nforce2_chipset_dev == NULL) + if (nforce2_dev == NULL) return -ENODEV; printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", - nforce2_chipset_dev->revision); + nforce2_dev->revision); printk(KERN_INFO - "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); + "cpufreq: FSB changing is maybe unstable and can lead to " + "crashes and data loss.\n"); return 0; } -- cgit v1.2.3 From 20174b65d9fdc8dddef3d2ab9647e01fdab13064 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 22:42:19 -0500 Subject: [CPUFREQ] nforce2: Use driver prefix, not cpufreq prefix. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index ad8284f0e865..99262906838c 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -56,6 +56,7 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, "Minimum FSB to use, if not defined: current FSB - 50"); +#define PFX "cpufreq-nforce2: " #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ "cpufreq-nforce2", msg) @@ -175,13 +176,13 @@ static int nforce2_set_fsb(unsigned int fsb) int pll = 0; if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); + printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); return -EINVAL; } tfsb = nforce2_fsb_read(0); if (!tfsb) { - printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); + printk(KERN_ERR PFX "Error while reading the FSB\n"); return -EINVAL; } @@ -278,7 +279,7 @@ static int nforce2_target(struct cpufreq_policy *policy, /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", + printk(KERN_ERR PFX "Changing FSB to %d failed\n", target_fsb); else dprintk("Changed FSB successfully to %d\n", @@ -329,9 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* FIX: Get FID from CPU */ if (!fid) { if (!cpu_khz) { - printk(KERN_WARNING - "cpufreq: cpu_khz not set, " - "can't calculate multiplier!\n"); + printk(KERN_WARNING PFX + "cpu_khz not set, can't calculate multiplier!\n"); return -ENODEV; } @@ -346,7 +346,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) } } - printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, + printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, fid / 10, fid % 10); /* Set maximum FSB to FSB at boot time */ @@ -402,10 +402,10 @@ static unsigned int nforce2_detect_chipset(void) if (nforce2_dev == NULL) return -ENODEV; - printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", + printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", nforce2_dev->revision); - printk(KERN_INFO - "cpufreq: FSB changing is maybe unstable and can lead to " + printk(KERN_INFO PFX + "FSB changing is maybe unstable and can lead to " "crashes and data loss.\n"); return 0; @@ -424,7 +424,7 @@ static int __init nforce2_init(void) /* detect chipset */ if (nforce2_detect_chipset()) { - printk(KERN_ERR "cpufreq: No nForce2 chipset.\n"); + printk(KERN_ERR PFX "No nForce2 chipset.\n"); return -ENODEV; } -- cgit v1.2.3 From 04cd1a99dc22bcaa1eccbe8f8386df8c1295e979 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 22:50:33 -0500 Subject: [CPUFREQ] checkpatch cleanups for elanfreq The remaining warning about the simple_strtoul conversion to strict_strtoul seems kind of pointless to me. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/elanfreq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c index fe613c93b366..006b278b0d5d 100644 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c @@ -184,7 +184,8 @@ static int elanfreq_target(struct cpufreq_policy *policy, { unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], + target_freq, relation, &newstate)) return -EINVAL; elanfreq_set_cpu_state(newstate); @@ -301,7 +302,8 @@ static void __exit elanfreq_exit(void) module_param(max_freq, int, 0444); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel , Sven Geggus "); +MODULE_AUTHOR("Robert Schwebel , " + "Sven Geggus "); MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); module_init(elanfreq_init); -- cgit v1.2.3 From c9b8c871525aeda153494996d84a832270205d81 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 22:54:47 -0500 Subject: [CPUFREQ] checkpatch cleanups for e_powersaver Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/e_powersaver.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c index c2f930d86640..3f83ea12c47a 100644 --- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c +++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c @@ -12,12 +12,12 @@ #include #include #include +#include +#include +#include #include #include -#include -#include -#include #define EPS_BRAND_C7M 0 #define EPS_BRAND_C7 1 @@ -184,7 +184,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) break; } - switch(brand) { + switch (brand) { case EPS_BRAND_C7M: printk(KERN_CONT "C7-M\n"); break; @@ -218,17 +218,20 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + printk(KERN_INFO "eps: Current voltage = %dmV\n", + current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); /* Print limits */ max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + printk(KERN_INFO "eps: Highest voltage = %dmV\n", + max_voltage * 16 + 700); max_multiplier = (hi >> 8) & 0xff; printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + printk(KERN_INFO "eps: Lowest voltage = %dmV\n", + min_voltage * 16 + 700); min_multiplier = (hi >> 24) & 0xff; printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); @@ -318,7 +321,7 @@ static int eps_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* eps_attr[] = { +static struct freq_attr *eps_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -356,7 +359,7 @@ static void __exit eps_exit(void) cpufreq_unregister_driver(&eps_driver); } -MODULE_AUTHOR("Rafa³ Bilski "); +MODULE_AUTHOR("Rafal Bilski "); MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 00f6a235bf241e62dfadf32b4322309e65c7b177 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 23:06:57 -0500 Subject: [CPUFREQ] checkpatch cleanups for gx-suspmod Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/gx-suspmod.c | 105 +++++++++++++++++++------------ 1 file changed, 65 insertions(+), 40 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c index 9d9eae82e60f..ac27ec2264d5 100644 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c @@ -79,8 +79,9 @@ #include #include #include +#include + #include -#include /* PCI config registers, all at F0 */ #define PCI_PMER1 0x80 /* power management enable register 1 */ @@ -122,8 +123,8 @@ static struct gxfreq_params *gx_params; static int stock_freq; /* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk = 0; -module_param (pci_busclk, int, 0444); +static int pci_busclk; +module_param(pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults @@ -132,7 +133,7 @@ module_param (pci_busclk, int, 0444); * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ static int max_duration = 255; -module_param (max_duration, int, 0444); +module_param(max_duration, int, 0444); /* For the default policy, we want at least some processing power * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) @@ -140,7 +141,8 @@ module_param (max_duration, int, 0444); #define POLICY_MIN_DIV 20 -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "gx-suspmod", msg) /** * we can detect a core multipiler from dir0_lsb @@ -166,12 +168,20 @@ static int gx_freq_mult[16] = { * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, + PCI_ANY_ID, PCI_ANY_ID }, { 0, }, }; +static void gx_write_byte(int reg, int value) +{ + pci_write_config_byte(gx_params->cs55x0, reg, value); +} + /** * gx_detect_chipset: * @@ -200,7 +210,8 @@ static __init struct pci_dev *gx_detect_chipset(void) /** * gx_get_cpuspeed: * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. + * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi + * Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { @@ -217,17 +228,18 @@ static unsigned int gx_get_cpuspeed(unsigned int cpu) * **/ -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) +static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, + u8 *off_duration) { unsigned int i; u8 tmp_on, tmp_off; int old_tmp_freq = stock_freq; int tmp_freq; - *off_duration=1; - *on_duration=0; + *off_duration = 1; + *on_duration = 0; - for (i=max_duration; i>0; i--) { + for (i = max_duration; i > 0; i--) { tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; @@ -259,26 +271,34 @@ static void gx_set_cpuspeed(unsigned int khz) freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); - new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration); + new_khz = gx_validate_speed(khz, &gx_params->on_duration, + &gx_params->off_duration); freqs.new = new_khz; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); local_irq_save(flags); - if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */ + + + if (new_khz != stock_freq) { + /* if new khz == 100% of CPU speed, it is special case */ switch (gx_params->cs55x0->device) { case PCI_DEVICE_ID_CYRIX_5530_LEGACY: pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; /* FIXME: need to test other values -- Zwane,Miura */ - pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg | SUSMOD; - } else { /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE; + /* typical 2 to 4ms */ + gx_write_byte(PCI_IRQTC, 4); + /* typical 50 to 100ms */ + gx_write_byte(PCI_VIDTC, 100); + gx_write_byte(PCI_PMER1, pmer1); + + if (gx_params->cs55x0->revision < 0x10) { + /* CS5530(rev 1.2, 1.3) */ + suscfg = gx_params->pci_suscfg|SUSMOD; + } else { + /* CS5530A,B.. */ + suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; } break; case PCI_DEVICE_ID_CYRIX_5520: @@ -294,13 +314,13 @@ static void gx_set_cpuspeed(unsigned int khz) suscfg = gx_params->pci_suscfg & ~(SUSMOD); gx_params->off_duration = 0; gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n"); + dprintk("suspend modulation disabled: cpu runs 100%% speed.\n"); } - pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); + gx_write_byte(PCI_MODOFF, gx_params->off_duration); + gx_write_byte(PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + gx_write_byte(PCI_SUSCFG, suscfg); pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); local_irq_restore(flags); @@ -334,7 +354,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) return -EINVAL; policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max @@ -354,7 +375,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) policy->max = tmp_freq; if (policy->max < policy->min) policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); return 0; } @@ -398,18 +420,18 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return -ENODEV; /* determine maximum frequency */ - if (pci_busclk) { + if (pci_busclk) maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } else if (cpu_khz) { + else if (cpu_khz) maxfreq = cpu_khz; - } else { + else maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } + stock_freq = maxfreq; curfreq = gx_get_cpuspeed(0); dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n",curfreq); + dprintk("cpu current frequency is %dkHz.\n", curfreq); /* setup basic struct for cpufreq API */ policy->cpu = 0; @@ -447,7 +469,8 @@ static int __init cpufreq_gx_init(void) struct pci_dev *gx_pci; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + gx_pci = gx_detect_chipset(); + if (gx_pci == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -468,9 +491,11 @@ static int __init cpufreq_gx_init(void) pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration)); + pci_read_config_byte(params->cs55x0, PCI_MODOFF, + &(params->off_duration)); - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + ret = cpufreq_register_driver(&gx_suspmod_driver); + if (ret) { kfree(params); return ret; /* register error! */ } @@ -485,9 +510,9 @@ static void __exit cpufreq_gx_exit(void) kfree(gx_params); } -MODULE_AUTHOR ("Hiroshi Miura "); -MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Hiroshi Miura "); +MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); +MODULE_LICENSE("GPL"); module_init(cpufreq_gx_init); module_exit(cpufreq_gx_exit); -- cgit v1.2.3 From ac617bd0f7b959dc6708ad2f0d6b9dcf4382f1ed Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 23:29:53 -0500 Subject: [CPUFREQ] checkpatch cleanups for longhaul Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/longhaul.c | 182 +++++++++++++++++---------------- arch/x86/kernel/cpu/cpufreq/longhaul.h | 12 +-- 2 files changed, 100 insertions(+), 94 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index a4cff5d6e380..dc03622a83a0 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -30,12 +30,12 @@ #include #include #include +#include +#include +#include +#include #include -#include -#include -#include -#include #include #include "longhaul.h" @@ -58,7 +58,7 @@ #define USE_NORTHBRIDGE (1 << 2) static int cpu_model; -static unsigned int numscales=16; +static unsigned int numscales = 16; static unsigned int fsb; static const struct mV_pos *vrm_mV_table; @@ -67,8 +67,8 @@ static const unsigned char *mV_vrm_table; static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; static int can_scale_voltage; -static struct acpi_processor *pr = NULL; -static struct acpi_processor_cx *cx = NULL; +static struct acpi_processor *pr; +static struct acpi_processor_cx *cx; static u32 acpi_regs_addr; static u8 longhaul_flags; static unsigned int longhaul_index; @@ -78,12 +78,13 @@ static int scale_voltage; static int disable_acpi_c3; static int revid_errata; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "longhaul", msg) /* Clock ratios multiplied by 10 */ -static int clock_ratio[32]; -static int eblcr_table[32]; +static int mults[32]; +static int eblcr[32]; static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; @@ -93,7 +94,7 @@ static char speedbuffer[8]; static char *print_speed(int speed) { if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed); + snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); return speedbuffer; } @@ -122,27 +123,28 @@ static unsigned int calc_speed(int mult) static int longhaul_get_cpu_mult(void) { - unsigned long invalue=0,lo, hi; + unsigned long invalue = 0, lo, hi; - rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22; - if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) { + rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); + invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; + if (longhaul_version == TYPE_LONGHAUL_V2 || + longhaul_version == TYPE_POWERSAVER) { if (lo & (1<<27)) - invalue+=16; + invalue += 16; } - return eblcr_table[invalue]; + return eblcr[invalue]; } /* For processor with BCR2 MSR */ -static void do_longhaul1(unsigned int clock_ratio_index) +static void do_longhaul1(unsigned int mults_index) { union msr_bcr2 bcr2; rdmsrl(MSR_VIA_BCR2, bcr2.val); /* Enable software clock multiplier */ bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; + bcr2.bits.CLOCKMUL = mults_index & 0xff; /* Sync to timer tick */ safe_halt(); @@ -161,7 +163,7 @@ static void do_longhaul1(unsigned int clock_ratio_index) /* For processor with Longhaul MSR */ -static void do_powersaver(int cx_address, unsigned int clock_ratio_index, +static void do_powersaver(int cx_address, unsigned int mults_index, unsigned int dir) { union msr_longhaul longhaul; @@ -173,11 +175,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index, longhaul.bits.RevisionKey = longhaul.bits.RevisionID; else longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; - longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; + longhaul.bits.SoftBusRatio = mults_index & 0xf; + longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; /* Setup new voltage */ if (can_scale_voltage) - longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; + longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; /* Sync to timer tick */ safe_halt(); /* Raise voltage if necessary */ @@ -240,14 +242,14 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index, /** * longhaul_set_cpu_frequency() - * @clock_ratio_index : bitpattern of the new multiplier. + * @mults_index : bitpattern of the new multiplier. * * Sets a new clock ratio. */ static void longhaul_setstate(unsigned int table_index) { - unsigned int clock_ratio_index; + unsigned int mults_index; int speed, mult; struct cpufreq_freqs freqs; unsigned long flags; @@ -256,9 +258,9 @@ static void longhaul_setstate(unsigned int table_index) u32 bm_timeout = 1000; unsigned int dir = 0; - clock_ratio_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].index; /* Safety precautions */ - mult = clock_ratio[clock_ratio_index & 0x1f]; + mult = mults[mults_index & 0x1f]; if (mult == -1) return; speed = calc_speed(mult); @@ -274,7 +276,7 @@ static void longhaul_setstate(unsigned int table_index) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", + dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", fsb, mult/10, mult%10, print_speed(speed/1000)); retry_loop: preempt_disable(); @@ -282,8 +284,8 @@ retry_loop: pic2_mask = inb(0xA1); pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF,0xA1); /* Overkill */ - outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF, 0xA1); /* Overkill */ + outb(0xFE, 0x21); /* TMR0 only */ /* Wait while PCI bus is busy. */ if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE @@ -312,7 +314,7 @@ retry_loop: * Software controlled multipliers only. */ case TYPE_LONGHAUL_V1: - do_longhaul1(clock_ratio_index); + do_longhaul1(mults_index); break; /* @@ -327,9 +329,9 @@ retry_loop: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, clock_ratio_index, dir); + do_powersaver(cx->address, mults_index, dir); } else { - do_powersaver(0, clock_ratio_index, dir); + do_powersaver(0, mults_index, dir); } break; } @@ -341,8 +343,8 @@ retry_loop: /* Enable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } - outb(pic2_mask,0xA1); /* restore mask */ - outb(pic1_mask,0x21); + outb(pic2_mask, 0xA1); /* restore mask */ + outb(pic1_mask, 0x21); local_irq_restore(flags); preempt_enable(); @@ -392,7 +394,8 @@ retry_loop: cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); + printk(KERN_INFO PFX "Warning: Timeout while waiting for " + "idle PCI bus.\n"); } /* @@ -458,31 +461,32 @@ static int __init longhaul_get_ranges(void) break; } - dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", + dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); - dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, + dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, print_speed(lowest_speed/1000), print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { - printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); return -EINVAL; } if (lowest_speed > highest_speed) { - printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", lowest_speed, highest_speed); return -EINVAL; } - longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL); - if(!longhaul_table) + longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table), + GFP_KERNEL); + if (!longhaul_table) return -ENOMEM; for (j = 0; j < numscales; j++) { - ratio = clock_ratio[j]; + ratio = mults[j]; if (ratio == -1) continue; if (ratio > maxmult || ratio < minmult) @@ -521,7 +525,7 @@ static int __init longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].index & 0x1f] == mult) { longhaul_index = j; break; } @@ -559,20 +563,22 @@ static void __init longhaul_setup_voltagescaling(void) maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " + printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); return; } if (minvid.mV == maxvid.mV) { - printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " - "both %d.%03d. Voltage scaling disabled\n", + printk(KERN_INFO PFX "Claims to support voltage scaling but " + "min & max are both %d.%03d. " + "Voltage scaling disabled\n", maxvid.mV/1000, maxvid.mV%1000); return; } - /* How many voltage steps */ + /* How many voltage steps*/ numvscales = maxvid.pos - minvid.pos + 1; printk(KERN_INFO PFX "Max VID=%d.%03d " @@ -586,7 +592,7 @@ static void __init longhaul_setup_voltagescaling(void) j = longhaul.bits.MinMHzBR; if (longhaul.bits.MinMHzBR4) j += 16; - min_vid_speed = eblcr_table[j]; + min_vid_speed = eblcr[j]; if (min_vid_speed == -1) return; switch (longhaul.bits.MinMHzFSB) { @@ -617,7 +623,8 @@ static void __init longhaul_setup_voltagescaling(void) pos = minvid.pos; longhaul_table[j].index |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + speed, j, vid.mV); j++; } @@ -640,7 +647,8 @@ static int longhaul_target(struct cpufreq_policy *policy, unsigned int dir = 0; u8 vid, current_vid; - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) + if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, + relation, &table_index)) return -EINVAL; /* Don't set same frequency again */ @@ -656,7 +664,8 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; + current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { @@ -691,9 +700,9 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, { struct acpi_device *d; - if ( acpi_bus_get_device(obj_handle, &d) ) { + if (acpi_bus_get_device(obj_handle, &d)) return 0; - } + *return_value = acpi_driver_data(d); return 1; } @@ -750,7 +759,7 @@ static int longhaul_setup_southbridge(void) /* Find VT8235 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); if (dev == NULL) - /* Find VT8237 southbridge */ + /* Find VT8237 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, NULL); if (dev != NULL) { @@ -769,7 +778,8 @@ static int longhaul_setup_southbridge(void) if (pci_cmd & 1 << 7) { pci_read_config_dword(dev, 0x88, &acpi_regs_addr); acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", + acpi_regs_addr); } pci_dev_put(dev); @@ -781,7 +791,7 @@ static int longhaul_setup_southbridge(void) static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = &cpu_data(0); - char *cpuname=NULL; + char *cpuname = NULL; int ret; u32 lo, hi; @@ -791,8 +801,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_SAMUEL; cpuname = "C3 'Samuel' [C5A]"; longhaul_version = TYPE_LONGHAUL_V1; - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr)); + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); break; case 7: @@ -803,10 +813,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpuname = "C3 'Samuel 2' [C5B]"; /* Note, this is not a typo, early Samuel2's had * Samuel1 ratios. */ - memcpy(clock_ratio, samuel1_clock_ratio, - sizeof(samuel1_clock_ratio)); - memcpy(eblcr_table, samuel2_eblcr, - sizeof(samuel2_eblcr)); + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); break; case 1 ... 15: longhaul_version = TYPE_LONGHAUL_V1; @@ -817,10 +825,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA; cpuname = "C3 'Ezra' [C5C]"; } - memcpy(clock_ratio, ezra_clock_ratio, - sizeof(ezra_clock_ratio)); - memcpy(eblcr_table, ezra_eblcr, - sizeof(ezra_eblcr)); + memcpy(mults, ezra_mults, sizeof(ezra_mults)); + memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); break; } break; @@ -829,18 +835,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA_T; cpuname = "C3 'Ezra-T' [C5M]"; longhaul_version = TYPE_POWERSAVER; - numscales=32; - memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio)); - memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr)); + numscales = 32; + memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); + memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); break; case 9: longhaul_version = TYPE_POWERSAVER; numscales = 32; - memcpy(clock_ratio, - nehemiah_clock_ratio, - sizeof(nehemiah_clock_ratio)); - memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); + memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); + memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; @@ -869,14 +873,14 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_version = TYPE_LONGHAUL_V1; } - printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - printk ("Longhaul v%d supported.\n", longhaul_version); + printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); break; case TYPE_POWERSAVER: - printk ("Powersaver supported.\n"); + printk(KERN_CONT "Powersaver supported.\n"); break; }; @@ -940,7 +944,7 @@ static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* longhaul_attr[] = { +static struct freq_attr *longhaul_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -966,13 +970,15 @@ static int __init longhaul_init(void) #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); + printk(KERN_ERR PFX "More than 1 CPU detected, " + "longhaul disabled.\n"); return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); + printk(KERN_ERR PFX "APIC detected. Longhaul is currently " + "broken in this configuration.\n"); return -ENODEV; } #endif @@ -993,8 +999,8 @@ static void __exit longhaul_exit(void) { int i; - for (i=0; i < numscales; i++) { - if (clock_ratio[i] == maxmult) { + for (i = 0; i < numscales; i++) { + if (mults[i] == maxmult) { longhaul_setstate(i); break; } @@ -1007,11 +1013,11 @@ static void __exit longhaul_exit(void) /* Even if BIOS is exporting ACPI C3 state, and it is used * with success when CPU is idle, this state doesn't * trigger frequency transition in some cases. */ -module_param (disable_acpi_c3, int, 0644); +module_param(disable_acpi_c3, int, 0644); MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); /* Change CPU voltage with frequency. Very usefull to save * power, but most VIA C3 processors aren't supporting it. */ -module_param (scale_voltage, int, 0644); +module_param(scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); /* Force revision key to 0 for processors which doesn't * support voltage scaling, but are introducing itself as @@ -1019,9 +1025,9 @@ MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); module_param(revid_errata, int, 0644); MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); -MODULE_AUTHOR ("Dave Jones "); -MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones "); +MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); +MODULE_LICENSE("GPL"); late_initcall(longhaul_init); module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h index 4fcc320997df..e2360a469f79 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.h +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h @@ -49,14 +49,14 @@ union msr_longhaul { /* * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr ones specify the ratio read from the CPU. - * The clock_ratio ones specify what to write to the CPU. + * The eblcr values specify the ratio read from the CPU. + * The mults values specify what to write to the CPU. */ /* * VIA C3 Samuel 1 & Samuel 2 (stepping 0) */ -static const int __initdata samuel1_clock_ratio[16] = { +static const int __initdata samuel1_mults[16] = { -1, /* 0000 -> RESERVED */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -119,7 +119,7 @@ static const int __initdata samuel2_eblcr[16] = { /* * VIA C3 Ezra */ -static const int __initdata ezra_clock_ratio[16] = { +static const int __initdata ezra_mults[16] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -160,7 +160,7 @@ static const int __initdata ezra_eblcr[16] = { /* * VIA C3 (Ezra-T) [C5M]. */ -static const int __initdata ezrat_clock_ratio[32] = { +static const int __initdata ezrat_mults[32] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -235,7 +235,7 @@ static const int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static const int __initdata nehemiah_clock_ratio[32] = { +static const int __initdata nehemiah_mults[32] = { 100, /* 0000 -> 10.0x */ -1, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ -- cgit v1.2.3 From 48ee923a666d4cc54e48d55fc573c57492501122 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 23:32:50 -0500 Subject: [CPUFREQ] checkpatch cleanups for longrun Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/longrun.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c index 777a7ff075de..da5f70fcb766 100644 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ b/arch/x86/kernel/cpu/cpufreq/longrun.c @@ -11,12 +11,13 @@ #include #include #include +#include #include #include -#include -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "longrun", msg) static struct cpufreq_driver longrun_driver; @@ -51,7 +52,7 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy) msr_lo &= 0x0000007F; msr_hi &= 0x0000007F; - if ( longrun_high_freq <= longrun_low_freq ) { + if (longrun_high_freq <= longrun_low_freq) { /* Assume degenerate Longrun table */ policy->min = policy->max = longrun_high_freq; } else { @@ -79,7 +80,7 @@ static int longrun_set_policy(struct cpufreq_policy *policy) if (!policy) return -EINVAL; - if ( longrun_high_freq <= longrun_low_freq ) { + if (longrun_high_freq <= longrun_low_freq) { /* Assume degenerate Longrun table */ pctg_lo = pctg_hi = 100; } else { @@ -152,7 +153,7 @@ static unsigned int longrun_get(unsigned int cpu) cpuid(0x80860007, &eax, &ebx, &ecx, &edx); dprintk("cpuid eax is %u\n", eax); - return (eax * 1000); + return eax * 1000; } /** @@ -196,7 +197,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); *high_freq = msr_lo * 1000; /* to kHz */ - dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq); + dprintk("longrun table interface told %u - %u kHz\n", + *low_freq, *high_freq); if (*low_freq > *high_freq) *low_freq = *high_freq; @@ -219,7 +221,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, cpuid(0x80860007, &eax, &ebx, &ecx, &edx); /* try decreasing in 10% steps, some processors react only * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) { + for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { /* set to 0 to try_hi perf_pctg */ msr_lo &= 0xFFFFFF80; msr_hi &= 0xFFFFFF80; @@ -236,7 +238,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) * eqals - * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) + * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) * * high_freq * perf_pctg is stored tempoarily into "ebx". */ @@ -317,9 +319,10 @@ static void __exit longrun_exit(void) } -MODULE_AUTHOR ("Dominik Brodowski "); -MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski "); +MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " + "Efficeon processors."); +MODULE_LICENSE("GPL"); module_init(longrun_init); module_exit(longrun_exit); -- cgit v1.2.3 From 14a6650f13b958aabc30ddd575b0902384b22457 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 00:00:04 -0500 Subject: [CPUFREQ] checkpatch cleanups for powernow-k6 Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k6.c | 44 ++++++++++++++++++------------- 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index c1ac5790c63e..f10dea409f40 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -1,6 +1,7 @@ /* * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, + * Dominik Brodowski. * * Licensed under the terms of the GNU GPL License version 2. * @@ -13,14 +14,15 @@ #include #include #include - -#include #include #include +#include + #define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long as it is unused */ +#define PFX "powernow-k6: " static unsigned int busfreq; /* FSB, in 10 kHz */ static unsigned int max_multiplier; @@ -47,8 +49,8 @@ static struct cpufreq_frequency_table clock_ratio[] = { */ static int powernow_k6_get_cpu_multiplier(void) { - u64 invalue = 0; - u32 msrval; + u64 invalue = 0; + u32 msrval; msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ @@ -68,12 +70,12 @@ static int powernow_k6_get_cpu_multiplier(void) */ static void powernow_k6_set_state(unsigned int best_i) { - unsigned long outvalue = 0, invalue = 0; - unsigned long msrval; - struct cpufreq_freqs freqs; + unsigned long outvalue = 0, invalue = 0; + unsigned long msrval; + struct cpufreq_freqs freqs; if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR "cpufreq: invalid target frequency\n"); + printk(KERN_ERR PFX "invalid target frequency\n"); return; } @@ -119,7 +121,8 @@ static int powernow_k6_verify(struct cpufreq_policy *policy) * powernow_k6_setpolicy - sets a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * sets a new CPUFreq policy */ @@ -127,9 +130,10 @@ static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &clock_ratio[0], + target_freq, relation, &newstate)) return -EINVAL; powernow_k6_set_state(newstate); @@ -140,7 +144,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy, static int powernow_k6_cpu_init(struct cpufreq_policy *policy) { - unsigned int i; + unsigned int i, f; int result; if (policy->cpu != 0) @@ -152,10 +156,11 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - if (clock_ratio[i].index > max_multiplier) + f = clock_ratio[i].index; + if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else - clock_ratio[i].frequency = busfreq * clock_ratio[i].index; + clock_ratio[i].frequency = busfreq * f; } /* cpuinfo and default policy values */ @@ -185,7 +190,9 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) static unsigned int powernow_k6_get(unsigned int cpu) { - return busfreq * powernow_k6_get_cpu_multiplier(); + unsigned int ret; + ret = (busfreq * powernow_k6_get_cpu_multiplier()); + return ret; } static struct freq_attr *powernow_k6_attr[] = { @@ -221,7 +228,7 @@ static int __init powernow_k6_init(void) return -ENODEV; if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk("cpufreq: PowerNow IOPORT region already used.\n"); + printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); return -EIO; } @@ -246,7 +253,8 @@ static void __exit powernow_k6_exit(void) } -MODULE_AUTHOR("Arjan van de Ven, Dave Jones , Dominik Brodowski "); +MODULE_AUTHOR("Arjan van de Ven, Dave Jones , " + "Dominik Brodowski "); MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 6072ace436800a011c3cb9a75ee49276bd90445a Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:27:35 -0500 Subject: [CPUFREQ] checkpatch cleanups for sc520 Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/sc520_freq.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c index 42da9bd677d6..435a996a613a 100644 --- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c +++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c @@ -19,17 +19,19 @@ #include #include +#include +#include #include -#include -#include #define MMCR_BASE 0xfffef000 /* The default base address */ #define OFFS_CPUCTL 0x2 /* CPU Control Register */ static __u8 __iomem *cpuctl; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "sc520_freq", msg) +#define PFX "sc520_freq: " static struct cpufreq_frequency_table sc520_freq_table[] = { {0x01, 100000}, @@ -43,7 +45,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) switch (clockspeed_reg & 0x03) { default: - printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + printk(KERN_ERR PFX "error: cpuctl register has unexpected " + "value %02x\n", clockspeed_reg); case 0x01: return 100000; case 0x02: @@ -51,7 +54,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) } } -static void sc520_freq_set_cpu_state (unsigned int state) +static void sc520_freq_set_cpu_state(unsigned int state) { struct cpufreq_freqs freqs; @@ -76,18 +79,19 @@ static void sc520_freq_set_cpu_state (unsigned int state) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); }; -static int sc520_freq_verify (struct cpufreq_policy *policy) +static int sc520_freq_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); } -static int sc520_freq_target (struct cpufreq_policy *policy, +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, sc520_freq_table, + target_freq, relation, &newstate)) return -EINVAL; sc520_freq_set_cpu_state(newstate); @@ -116,7 +120,7 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); @@ -131,7 +135,7 @@ static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) } -static struct freq_attr* sc520_freq_attr[] = { +static struct freq_attr *sc520_freq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -155,13 +159,13 @@ static int __init sc520_freq_init(void) int err; /* Test if we have the right hardware */ - if(c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { dprintk("no Elan SC520 processor found!\n"); return -ENODEV; } cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if(!cpuctl) { + if (!cpuctl) { printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); return -ENOMEM; } -- cgit v1.2.3 From 29464f281389fd7e9adf969de7bbeb20b8596f82 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:37:11 -0500 Subject: [CPUFREQ] checkpatch cleanups for cpufreq core Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 52 +++++++++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b55cb67435bd..1867dac35aff 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -104,7 +104,8 @@ EXPORT_SYMBOL_GPL(unlock_policy_rwsem_write); /* internal prototypes */ -static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event); +static int __cpufreq_governor(struct cpufreq_policy *policy, + unsigned int event); static unsigned int __cpufreq_get(unsigned int cpu); static void handle_update(struct work_struct *work); @@ -128,7 +129,7 @@ static int __init init_cpufreq_transition_notifier_list(void) pure_initcall(init_cpufreq_transition_notifier_list); static LIST_HEAD(cpufreq_governor_list); -static DEFINE_MUTEX (cpufreq_governor_mutex); +static DEFINE_MUTEX(cpufreq_governor_mutex); struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) { @@ -371,7 +372,7 @@ static struct cpufreq_governor *__find_governor(const char *str_governor) struct cpufreq_governor *t; list_for_each_entry(t, &cpufreq_governor_list, governor_list) - if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN)) + if (!strnicmp(str_governor, t->name, CPUFREQ_NAME_LEN)) return t; return NULL; @@ -429,15 +430,11 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, mutex_unlock(&cpufreq_governor_mutex); } - out: +out: return err; } -/* drivers/base/cpu.c */ -extern struct sysdev_class cpu_sysdev_class; - - /** * cpufreq_per_cpu_attr_read() / show_##file_name() - * print out cpufreq information @@ -450,7 +447,7 @@ extern struct sysdev_class cpu_sysdev_class; static ssize_t show_##file_name \ (struct cpufreq_policy *policy, char *buf) \ { \ - return sprintf (buf, "%u\n", policy->object); \ + return sprintf(buf, "%u\n", policy->object); \ } show_one(cpuinfo_min_freq, cpuinfo.min_freq); @@ -476,7 +473,7 @@ static ssize_t store_##file_name \ if (ret) \ return -EINVAL; \ \ - ret = sscanf (buf, "%u", &new_policy.object); \ + ret = sscanf(buf, "%u", &new_policy.object); \ if (ret != 1) \ return -EINVAL; \ \ @@ -486,8 +483,8 @@ static ssize_t store_##file_name \ return ret ? ret : count; \ } -store_one(scaling_min_freq,min); -store_one(scaling_max_freq,max); +store_one(scaling_min_freq, min); +store_one(scaling_max_freq, max); /** * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware @@ -507,12 +504,13 @@ static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, */ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) { - if(policy->policy == CPUFREQ_POLICY_POWERSAVE) + if (policy->policy == CPUFREQ_POLICY_POWERSAVE) return sprintf(buf, "powersave\n"); else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) return sprintf(buf, "performance\n"); else if (policy->governor) - return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", policy->governor->name); + return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", + policy->governor->name); return -EINVAL; } @@ -531,7 +529,7 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, if (ret) return ret; - ret = sscanf (buf, "%15s", str_governor); + ret = sscanf(buf, "%15s", str_governor); if (ret != 1) return -EINVAL; @@ -575,7 +573,8 @@ static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, } list_for_each_entry(t, &cpufreq_governor_list, governor_list) { - if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) - (CPUFREQ_NAME_LEN + 2))) + if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) + - (CPUFREQ_NAME_LEN + 2))) goto out; i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name); } @@ -594,7 +593,7 @@ static ssize_t show_cpus(const struct cpumask *mask, char *buf) i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " "); i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu); if (i >= (PAGE_SIZE - 5)) - break; + break; } i += sprintf(&buf[i], "\n"); return i; @@ -684,10 +683,10 @@ static struct attribute *default_attrs[] = { NULL }; -#define to_policy(k) container_of(k,struct cpufreq_policy,kobj) -#define to_attr(a) container_of(a,struct freq_attr,attr) +#define to_policy(k) container_of(k, struct cpufreq_policy, kobj) +#define to_attr(a) container_of(a, struct freq_attr, attr) -static ssize_t show(struct kobject *kobj, struct attribute *attr ,char *buf) +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) { struct cpufreq_policy *policy = to_policy(kobj); struct freq_attr *fattr = to_attr(attr); @@ -858,10 +857,10 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) if (cpu == j) continue; - /* check for existing affected CPUs. They may not be aware - * of it due to CPU Hotplug. + /* Check for existing affected CPUs. + * They may not be aware of it due to CPU Hotplug. */ - managed_policy = cpufreq_cpu_get(j); // FIXME: Where is this released? What about error paths? + managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */ if (unlikely(managed_policy)) { /* Set proper policy_cpu */ @@ -1142,8 +1141,8 @@ static void handle_update(struct work_struct *work) * @old_freq: CPU frequency the kernel thinks the CPU runs at * @new_freq: CPU frequency the CPU actually runs at * - * We adjust to current frequency first, and need to clean up later. So either call - * to cpufreq_update_policy() or schedule handle_update()). + * We adjust to current frequency first, and need to clean up later. + * So either call to cpufreq_update_policy() or schedule handle_update()). */ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigned int new_freq) @@ -1625,7 +1624,8 @@ EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); /** * cpufreq_get_policy - get the current cpufreq_policy - * @policy: struct cpufreq_policy into which the current cpufreq_policy is written + * @policy: struct cpufreq_policy into which the current cpufreq_policy + * is written * * Reads the current cpufreq policy. */ -- cgit v1.2.3 From 9acef4875695a7717734f2578666a64822ea6495 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:39:51 -0500 Subject: [CPUFREQ] checkpatch cleanups for conservative governor Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 0320962c4ec5..c6b3c6a02fc9 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -82,7 +82,7 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki */ -static DEFINE_MUTEX (dbs_mutex); +static DEFINE_MUTEX(dbs_mutex); static DECLARE_DELAYED_WORK(dbs_work, do_dbs_timer); struct dbs_tuners { @@ -140,12 +140,12 @@ static struct notifier_block dbs_cpufreq_notifier_block = { /************************** sysfs interface ************************/ static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) { - return sprintf (buf, "%u\n", MAX_SAMPLING_RATE); + return sprintf(buf, "%u\n", MAX_SAMPLING_RATE); } static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) { - return sprintf (buf, "%u\n", MIN_SAMPLING_RATE); + return sprintf(buf, "%u\n", MIN_SAMPLING_RATE); } #define define_one_ro(_name) \ @@ -174,7 +174,7 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, { unsigned int input; int ret; - ret = sscanf (buf, "%u", &input); + ret = sscanf(buf, "%u", &input); if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) return -EINVAL; @@ -190,10 +190,11 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, { unsigned int input; int ret; - ret = sscanf (buf, "%u", &input); + ret = sscanf(buf, "%u", &input); mutex_lock(&dbs_mutex); - if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) { + if (ret != 1 || input > MAX_SAMPLING_RATE || + input < MIN_SAMPLING_RATE) { mutex_unlock(&dbs_mutex); return -EINVAL; } @@ -209,10 +210,11 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, { unsigned int input; int ret; - ret = sscanf (buf, "%u", &input); + ret = sscanf(buf, "%u", &input); mutex_lock(&dbs_mutex); - if (ret != 1 || input > 100 || input <= dbs_tuners_ins.down_threshold) { + if (ret != 1 || input > 100 || + input <= dbs_tuners_ins.down_threshold) { mutex_unlock(&dbs_mutex); return -EINVAL; } @@ -228,7 +230,7 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused, { unsigned int input; int ret; - ret = sscanf (buf, "%u", &input); + ret = sscanf(buf, "%u", &input); mutex_lock(&dbs_mutex); if (ret != 1 || input > 100 || input >= dbs_tuners_ins.up_threshold) { @@ -310,7 +312,7 @@ define_one_rw(down_threshold); define_one_rw(ignore_nice_load); define_one_rw(freq_step); -static struct attribute * dbs_attributes[] = { +static struct attribute *dbs_attributes[] = { &sampling_rate_max.attr, &sampling_rate_min.attr, &sampling_rate.attr, @@ -600,11 +602,11 @@ static void __exit cpufreq_gov_dbs_exit(void) } -MODULE_AUTHOR ("Alexander Clouter "); -MODULE_DESCRIPTION ("'cpufreq_conservative' - A dynamic cpufreq governor for " +MODULE_AUTHOR("Alexander Clouter "); +MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for " "Low Latency Frequency Transition capable processors " "optimised for use in a battery environment"); -MODULE_LICENSE ("GPL"); +MODULE_LICENSE("GPL"); #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE fs_initcall(cpufreq_gov_dbs_init); -- cgit v1.2.3 From 0a829c5afde8e9e9c33a3a5c231b04dcf253337d Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:49:04 -0500 Subject: [CPUFREQ] checkpatch cleanups for cpufreq_stats Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_stats.c | 74 +++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 39 deletions(-) diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index c0ff97d375d7..5a62d678dd19 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -2,7 +2,7 @@ * drivers/cpufreq/cpufreq_stats.c * * Copyright (C) 2003-2004 Venkatesh Pallipadi . - * (C) 2004 Zou Nan hai . + * (C) 2004 Zou Nan hai . * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,7 +23,7 @@ static spinlock_t cpufreq_stats_lock; -#define CPUFREQ_STATDEVICE_ATTR(_name,_mode,_show) \ +#define CPUFREQ_STATDEVICE_ATTR(_name, _mode, _show) \ static struct freq_attr _attr_##_name = {\ .attr = {.name = __stringify(_name), .mode = _mode, }, \ .show = _show,\ @@ -50,8 +50,7 @@ struct cpufreq_stats_attribute { ssize_t(*show) (struct cpufreq_stats *, char *); }; -static int -cpufreq_stats_update (unsigned int cpu) +static int cpufreq_stats_update(unsigned int cpu) { struct cpufreq_stats *stat; unsigned long long cur_time; @@ -68,8 +67,7 @@ cpufreq_stats_update (unsigned int cpu) return 0; } -static ssize_t -show_total_trans(struct cpufreq_policy *policy, char *buf) +static ssize_t show_total_trans(struct cpufreq_policy *policy, char *buf) { struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, policy->cpu); if (!stat) @@ -78,8 +76,7 @@ show_total_trans(struct cpufreq_policy *policy, char *buf) per_cpu(cpufreq_stats_table, stat->cpu)->total_trans); } -static ssize_t -show_time_in_state(struct cpufreq_policy *policy, char *buf) +static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf) { ssize_t len = 0; int i; @@ -89,14 +86,14 @@ show_time_in_state(struct cpufreq_policy *policy, char *buf) cpufreq_stats_update(stat->cpu); for (i = 0; i < stat->state_num; i++) { len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i], - (unsigned long long)cputime64_to_clock_t(stat->time_in_state[i])); + (unsigned long long) + cputime64_to_clock_t(stat->time_in_state[i])); } return len; } #ifdef CONFIG_CPU_FREQ_STAT_DETAILS -static ssize_t -show_trans_table(struct cpufreq_policy *policy, char *buf) +static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) { ssize_t len = 0; int i, j; @@ -139,11 +136,11 @@ show_trans_table(struct cpufreq_policy *policy, char *buf) return PAGE_SIZE; return len; } -CPUFREQ_STATDEVICE_ATTR(trans_table,0444,show_trans_table); +CPUFREQ_STATDEVICE_ATTR(trans_table, 0444, show_trans_table); #endif -CPUFREQ_STATDEVICE_ATTR(total_trans,0444,show_total_trans); -CPUFREQ_STATDEVICE_ATTR(time_in_state,0444,show_time_in_state); +CPUFREQ_STATDEVICE_ATTR(total_trans, 0444, show_total_trans); +CPUFREQ_STATDEVICE_ATTR(time_in_state, 0444, show_time_in_state); static struct attribute *default_attrs[] = { &_attr_total_trans.attr, @@ -158,8 +155,7 @@ static struct attribute_group stats_attr_group = { .name = "stats" }; -static int -freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq) +static int freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq) { int index; for (index = 0; index < stat->max_state; index++) @@ -183,8 +179,7 @@ static void cpufreq_stats_free_table(unsigned int cpu) cpufreq_cpu_put(policy); } -static int -cpufreq_stats_create_table (struct cpufreq_policy *policy, +static int cpufreq_stats_create_table(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table) { unsigned int i, j, count = 0, ret = 0; @@ -194,7 +189,8 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy, unsigned int cpu = policy->cpu; if (per_cpu(cpufreq_stats_table, cpu)) return -EBUSY; - if ((stat = kzalloc(sizeof(struct cpufreq_stats), GFP_KERNEL)) == NULL) + stat = kzalloc(sizeof(struct cpufreq_stats), GFP_KERNEL); + if ((stat) == NULL) return -ENOMEM; data = cpufreq_cpu_get(cpu); @@ -203,13 +199,14 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy, goto error_get_fail; } - if ((ret = sysfs_create_group(&data->kobj, &stats_attr_group))) + ret = sysfs_create_group(&data->kobj, &stats_attr_group); + if (ret) goto error_out; stat->cpu = cpu; per_cpu(cpufreq_stats_table, cpu) = stat; - for (i=0; table[i].frequency != CPUFREQ_TABLE_END; i++) { + for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) { unsigned int freq = table[i].frequency; if (freq == CPUFREQ_ENTRY_INVALID) continue; @@ -255,9 +252,8 @@ error_get_fail: return ret; } -static int -cpufreq_stat_notifier_policy (struct notifier_block *nb, unsigned long val, - void *data) +static int cpufreq_stat_notifier_policy(struct notifier_block *nb, + unsigned long val, void *data) { int ret; struct cpufreq_policy *policy = data; @@ -268,14 +264,14 @@ cpufreq_stat_notifier_policy (struct notifier_block *nb, unsigned long val, table = cpufreq_frequency_get_table(cpu); if (!table) return 0; - if ((ret = cpufreq_stats_create_table(policy, table))) + ret = cpufreq_stats_create_table(policy, table); + if (ret) return ret; return 0; } -static int -cpufreq_stat_notifier_trans (struct notifier_block *nb, unsigned long val, - void *data) +static int cpufreq_stat_notifier_trans(struct notifier_block *nb, + unsigned long val, void *data) { struct cpufreq_freqs *freq = data; struct cpufreq_stats *stat; @@ -340,19 +336,20 @@ static struct notifier_block notifier_trans_block = { .notifier_call = cpufreq_stat_notifier_trans }; -static int -__init cpufreq_stats_init(void) +static int __init cpufreq_stats_init(void) { int ret; unsigned int cpu; spin_lock_init(&cpufreq_stats_lock); - if ((ret = cpufreq_register_notifier(¬ifier_policy_block, - CPUFREQ_POLICY_NOTIFIER))) + ret = cpufreq_register_notifier(¬ifier_policy_block, + CPUFREQ_POLICY_NOTIFIER); + if (ret) return ret; - if ((ret = cpufreq_register_notifier(¬ifier_trans_block, - CPUFREQ_TRANSITION_NOTIFIER))) { + ret = cpufreq_register_notifier(¬ifier_trans_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret) { cpufreq_unregister_notifier(¬ifier_policy_block, CPUFREQ_POLICY_NOTIFIER); return ret; @@ -364,8 +361,7 @@ __init cpufreq_stats_init(void) } return 0; } -static void -__exit cpufreq_stats_exit(void) +static void __exit cpufreq_stats_exit(void) { unsigned int cpu; @@ -379,10 +375,10 @@ __exit cpufreq_stats_exit(void) } } -MODULE_AUTHOR ("Zou Nan hai "); -MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats " +MODULE_AUTHOR("Zou Nan hai "); +MODULE_DESCRIPTION("'cpufreq_stats' - A driver to export cpufreq stats " "through sysfs filesystem"); -MODULE_LICENSE ("GPL"); +MODULE_LICENSE("GPL"); module_init(cpufreq_stats_init); module_exit(cpufreq_stats_exit); -- cgit v1.2.3 From 1bceb8d13907d681b7eac9ae0ae14f2eecae9801 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:51:46 -0500 Subject: [CPUFREQ] checkpatch cleanups for userspace governor Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_userspace.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index 1442bbada053..66d2d1d6c80f 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -24,9 +24,6 @@ #include #include -#include - - /** * A few values needed by the userspace governor */ @@ -37,7 +34,7 @@ static DEFINE_PER_CPU(unsigned int, cpu_set_freq); /* CPU freq desired by userspace */ static DEFINE_PER_CPU(unsigned int, cpu_is_managed); -static DEFINE_MUTEX (userspace_mutex); +static DEFINE_MUTEX(userspace_mutex); static int cpus_using_userspace_governor; #define dprintk(msg...) \ @@ -46,9 +43,9 @@ static int cpus_using_userspace_governor; /* keep track of frequency transitions */ static int userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) + void *data) { - struct cpufreq_freqs *freq = data; + struct cpufreq_freqs *freq = data; if (!per_cpu(cpu_is_managed, freq->cpu)) return 0; @@ -57,11 +54,11 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, freq->cpu, freq->new); per_cpu(cpu_cur_freq, freq->cpu) = freq->new; - return 0; + return 0; } static struct notifier_block userspace_cpufreq_notifier_block = { - .notifier_call = userspace_cpufreq_notifier + .notifier_call = userspace_cpufreq_notifier }; @@ -93,8 +90,11 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) * We're safe from concurrent calls to ->target() here * as we hold the userspace_mutex lock. If we were calling * cpufreq_driver_target, a deadlock situation might occur: - * A: cpufreq_set (lock userspace_mutex) -> cpufreq_driver_target(lock policy->lock) - * B: cpufreq_set_policy(lock policy->lock) -> __cpufreq_governor -> cpufreq_governor_userspace (lock userspace_mutex) + * A: cpufreq_set (lock userspace_mutex) -> + * cpufreq_driver_target(lock policy->lock) + * B: cpufreq_set_policy(lock policy->lock) -> + * __cpufreq_governor -> + * cpufreq_governor_userspace (lock userspace_mutex) */ ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L); @@ -210,9 +210,10 @@ static void __exit cpufreq_gov_userspace_exit(void) } -MODULE_AUTHOR ("Dominik Brodowski , Russell King "); -MODULE_DESCRIPTION ("CPUfreq policy governor 'userspace'"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski , " + "Russell King "); +MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'"); +MODULE_LICENSE("GPL"); #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE fs_initcall(cpufreq_gov_userspace_init); -- cgit v1.2.3 From 97acec55de8b168548665f267c9dd45ed863b179 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:56:41 -0500 Subject: [CPUFREQ] checkpatch cleanups for freq_table Signed-off-by: Dave Jones --- drivers/cpufreq/freq_table.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index 9071d80fbba2..a9bd3a05a684 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -28,7 +28,7 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, unsigned int max_freq = 0; unsigned int i; - for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { unsigned int freq = table[i].frequency; if (freq == CPUFREQ_ENTRY_INVALID) { dprintk("table entry %u is invalid, skipping\n", i); @@ -70,7 +70,7 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { unsigned int freq = table[i].frequency; if (freq == CPUFREQ_ENTRY_INVALID) continue; @@ -125,13 +125,13 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (!cpu_online(policy->cpu)) return -EINVAL; - for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { unsigned int freq = table[i].frequency; if (freq == CPUFREQ_ENTRY_INVALID) continue; if ((freq < policy->min) || (freq > policy->max)) continue; - switch(relation) { + switch (relation) { case CPUFREQ_RELATION_H: if (freq <= target_freq) { if (freq >= optimal.frequency) { @@ -178,7 +178,7 @@ static DEFINE_PER_CPU(struct cpufreq_frequency_table *, show_table); /** * show_available_freqs - show available frequencies for the specified CPU */ -static ssize_t show_available_freqs (struct cpufreq_policy *policy, char *buf) +static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf) { unsigned int i = 0; unsigned int cpu = policy->cpu; @@ -190,7 +190,7 @@ static ssize_t show_available_freqs (struct cpufreq_policy *policy, char *buf) table = per_cpu(show_table, cpu); - for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { if (table[i].frequency == CPUFREQ_ENTRY_INVALID) continue; count += sprintf(&buf[count], "%d ", table[i].frequency); @@ -234,6 +234,6 @@ struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu) } EXPORT_SYMBOL_GPL(cpufreq_frequency_get_table); -MODULE_AUTHOR ("Dominik Brodowski "); -MODULE_DESCRIPTION ("CPUfreq frequency table helpers"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski "); +MODULE_DESCRIPTION("CPUfreq frequency table helpers"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From bbfebd66554b934b270c4c49442f4fe5e62df0e5 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 23:55:22 -0500 Subject: [CPUFREQ] checkpatch cleanups for speedstep related drivers. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 60 +++++----- arch/x86/kernel/cpu/cpufreq/speedstep-ich.c | 70 ++++++------ arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 129 ++++++++++++--------- arch/x86/kernel/cpu/cpufreq/speedstep-lib.h | 18 +-- arch/x86/kernel/cpu/cpufreq/speedstep-smi.c | 166 +++++++++++++++++----------- 5 files changed, 258 insertions(+), 185 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index b585e04cbc9e..46a2a7a53148 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -27,15 +27,16 @@ #include #include #include +#include #include #include -#include #include "speedstep-lib.h" #define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "p4-clockmod", msg) /* * Duty Cycle (3bits), note DC_DISABLE is not specified in @@ -58,7 +59,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) { u32 l, h; - if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV)) + if (!cpu_online(cpu) || + (newstate > DC_DISABLE) || (newstate == DC_RESV)) return -EINVAL; rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); @@ -66,7 +68,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) if (l & 0x01) dprintk("CPU#%d currently thermal throttled\n", cpu); - if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) + if (has_N44_O17_errata[cpu] && + (newstate == DC_25PT || newstate == DC_DFLT)) newstate = DC_38PT; rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); @@ -112,7 +115,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; int i; - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); @@ -127,7 +131,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } - /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software + /* run on each logical CPU, + * see section 13.15.3 of IA32 Intel Architecture Software * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) @@ -153,28 +158,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { if (cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. " - "The acpi-cpufreq module offers voltage scaling" - " in addition of frequency scaling. You should use " - "that instead of p4-clockmod, if possible.\n"); + printk(KERN_WARNING PFX "Warning: EST-capable CPU " + "detected. The acpi-cpufreq module offers " + "voltage scaling in addition of frequency " + "scaling. You should use that instead of " + "p4-clockmod, if possible.\n"); switch (c->x86_model) { case 0x0E: /* Core */ case 0x0F: /* Core Duo */ case 0x16: /* Celeron Core */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE); + return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); case 0x0D: /* Pentium M (Dothan) */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; /* fall through */ case 0x09: /* Pentium M (Banias) */ - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM); + return speedstep_get_frequency(SPEEDSTEP_CPU_PM); } } if (c->x86 != 0xF) { if (!cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. " - "Please send an e-mail to \n"); + printk(KERN_WARNING PFX "Unknown CPU. " + "Please send an e-mail to " + "\n"); return 0; } @@ -182,16 +189,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) * throttling is active or not. */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) { + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " "The speedstep-ich or acpi cpufreq modules offer " "voltage scaling in addition of frequency scaling. " "You should use either one instead of p4-clockmod, " "if possible.\n"); - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); } - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); } @@ -223,8 +230,8 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) return -EINVAL; /* table init */ - for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i<2) && (has_N44_O17_errata[policy->cpu])) + for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if ((i < 2) && (has_N44_O17_errata[policy->cpu])) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; else p4clockmod_table[i].frequency = (stock_freq * i)/8; @@ -258,12 +265,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu) l = DC_DISABLE; if (l != DC_DISABLE) - return (stock_freq * l / 8); + return stock_freq * l / 8; return stock_freq; } -static struct freq_attr* p4clockmod_attr[] = { +static struct freq_attr *p4clockmod_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -299,9 +306,10 @@ static int __init cpufreq_p4_init(void) ret = cpufreq_register_driver(&p4clockmod_driver); if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); + printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " + "Modulation available\n"); - return (ret); + return ret; } @@ -311,9 +319,9 @@ static void __exit cpufreq_p4_exit(void) } -MODULE_AUTHOR ("Zwane Mwaikambo "); -MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Zwane Mwaikambo "); +MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); +MODULE_LICENSE("GPL"); late_initcall(cpufreq_p4_init); module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index dedc1e98f168..8bbb11adb315 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev; /* speedstep_processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor; static u32 pmbase; @@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { }; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-ich", msg) /** @@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { * * Returns: -ENODEV if no register could be found */ -static int speedstep_find_register (void) +static int speedstep_find_register(void) { if (!speedstep_chipset_dev) return -ENODEV; @@ -90,7 +91,7 @@ static int speedstep_find_register (void) * * Tries to change the SpeedStep state. */ -static void speedstep_set_state (unsigned int state) +static void speedstep_set_state(unsigned int state) { u8 pm2_blk; u8 value; @@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state) dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - if (state == (value & 0x1)) { - dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); - } else { - printk (KERN_ERR "cpufreq: change failed - I/O error\n"); - } + if (state == (value & 0x1)) + dprintk("change to %u MHz succeeded\n", + speedstep_get_frequency(speedstep_processor) / 1000); + else + printk(KERN_ERR "cpufreq: change failed - I/O error\n"); return; } @@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state) * Tries to activate the SpeedStep status and control registers. * Returns -EINVAL on an unsupported chipset, and zero on success. */ -static int speedstep_activate (void) +static int speedstep_activate(void) { u16 value = 0; @@ -175,20 +176,18 @@ static int speedstep_activate (void) * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected * chipset, or zero on failure. */ -static unsigned int speedstep_detect_chipset (void) +static unsigned int speedstep_detect_chipset(void) { speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) return 4; /* 4-M */ speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) return 3; /* 3-M */ @@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void) speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) { /* speedstep.c causes lockups on Dell Inspirons 8000 and @@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void) hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (!hostbridge) @@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus) cpus_allowed = current->cpus_allowed; set_cpus_allowed_ptr(current, cpus); - speed = speedstep_get_processor_frequency(speedstep_processor); + speed = speedstep_get_frequency(speedstep_processor); set_cpus_allowed_ptr(current, &cpus_allowed); dprintk("detected %u kHz as current frequency\n", speed); return speed; @@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu) * speedstep_target - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ -static int speedstep_target (struct cpufreq_policy *policy, +static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy, cpumask_t cpus_allowed; int i; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = _speedstep_get(policy->cpus); @@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy, * Limit must be within speedstep_low_freq and speedstep_high_freq, with * at least one border included. */ -static int speedstep_verify (struct cpufreq_policy *policy) +static int speedstep_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } @@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) return -EIO; dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) + ? "low" : "high", (speed / 1000)); /* cpuinfo and default policy values */ @@ -352,9 +352,9 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); if (result) - return (result); + return result; - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); return 0; } @@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* speedstep_attr[] = { +static struct freq_attr *speedstep_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -396,13 +396,15 @@ static int __init speedstep_init(void) /* detect processor */ speedstep_processor = speedstep_detect_processor(); if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor not found\n"); + dprintk("Intel(R) SpeedStep(TM) capable processor " + "not found\n"); return -ENODEV; } /* detect chipset */ if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); + dprintk("Intel(R) SpeedStep(TM) for this chipset not " + "(yet) available.\n"); return -ENODEV; } @@ -431,9 +433,11 @@ static void __exit speedstep_exit(void) } -MODULE_AUTHOR ("Dave Jones , Dominik Brodowski "); -MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones , " + "Dominik Brodowski "); +MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " + "with ICH-M southbridges."); +MODULE_LICENSE("GPL"); module_init(speedstep_init); module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index cdac7d62369b..55c696daa05c 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -18,10 +18,13 @@ #include #include "speedstep-lib.h" -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-lib", msg) + +#define PFX "speedstep-lib: " #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check = 0; +static int relaxed_check; #else #define relaxed_check 0 #endif @@ -30,14 +33,14 @@ static int relaxed_check = 0; * GET PROCESSOR CORE SPEED IN KHZ * *********************************************************************/ -static unsigned int pentium3_get_frequency (unsigned int processor) +static unsigned int pentium3_get_frequency(unsigned int processor) { - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ + /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { unsigned int ratio; /* Frequency Multiplier (x10) */ u8 bitmap; /* power on configuration bits [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult [] = { + } msr_decode_mult[] = { { 30, 0x01 }, { 35, 0x05 }, { 40, 0x02 }, @@ -52,7 +55,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) { 85, 0x26 }, { 90, 0x20 }, { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ + { 0, 0xff } /* error or unknown value */ }; /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ @@ -60,7 +63,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) unsigned int value; /* Front Side Bus speed in MHz */ u8 bitmap; /* power on configuration bits [18: 19] (in MSR 0x2a) */ - } msr_decode_fsb [] = { + } msr_decode_fsb[] = { { 66, 0x0 }, { 100, 0x2 }, { 133, 0x1 }, @@ -85,7 +88,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) } /* decode the multiplier */ - if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) { + if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { dprintk("workaround for early PIIIs\n"); msr_lo &= 0x03c00000; } else @@ -97,9 +100,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor) j++; } - dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); + dprintk("speed is %u\n", + (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100); + return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; } @@ -112,20 +116,23 @@ static unsigned int pentiumM_get_frequency(void) /* see table B-2 of 24547212.pdf */ if (msr_lo & 0x00040000) { - printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp); + printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", + msr_lo, msr_tmp); return 0; } msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000)); + dprintk("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * 100 * 1000)); - return (msr_tmp * 100 * 1000); + return msr_tmp * 100 * 1000; } static unsigned int pentium_core_get_frequency(void) { u32 fsb = 0; u32 msr_lo, msr_tmp; + int ret; rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); /* see table B-2 of 25366920.pdf */ @@ -153,12 +160,15 @@ static unsigned int pentium_core_get_frequency(void) } rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", + msr_lo, msr_tmp); msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb)); + dprintk("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * fsb)); - return (msr_tmp * fsb); + ret = (msr_tmp * fsb); + return ret; } @@ -167,6 +177,7 @@ static unsigned int pentium4_get_frequency(void) struct cpuinfo_x86 *c = &boot_cpu_data; u32 msr_lo, msr_hi, mult; unsigned int fsb = 0; + unsigned int ret; rdmsr(0x2c, msr_lo, msr_hi); @@ -195,44 +206,47 @@ static unsigned int pentium4_get_frequency(void) } if (!fsb) - printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to \n"); + printk(KERN_DEBUG PFX "couldn't detect FSB speed. " + "Please send an e-mail to \n"); /* Multiplier. */ mult = msr_lo >> 24; - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult)); + dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", + fsb, mult, (fsb * mult)); - return (fsb * mult); + ret = (fsb * mult); + return ret; } -unsigned int speedstep_get_processor_frequency(unsigned int processor) +unsigned int speedstep_get_frequency(unsigned int processor) { switch (processor) { - case SPEEDSTEP_PROCESSOR_PCORE: + case SPEEDSTEP_CPU_PCORE: return pentium_core_get_frequency(); - case SPEEDSTEP_PROCESSOR_PM: + case SPEEDSTEP_CPU_PM: return pentiumM_get_frequency(); - case SPEEDSTEP_PROCESSOR_P4D: - case SPEEDSTEP_PROCESSOR_P4M: + case SPEEDSTEP_CPU_P4D: + case SPEEDSTEP_CPU_P4M: return pentium4_get_frequency(); - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: return pentium3_get_frequency(processor); default: return 0; }; return 0; } -EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); +EXPORT_SYMBOL_GPL(speedstep_get_frequency); /********************************************************************* * DETECT SPEEDSTEP-CAPABLE PROCESSOR * *********************************************************************/ -unsigned int speedstep_detect_processor (void) +unsigned int speedstep_detect_processor(void) { struct cpuinfo_x86 *c = &cpu_data(0); u32 ebx, msr_lo, msr_hi; @@ -261,7 +275,7 @@ unsigned int speedstep_detect_processor (void) * sample has ebx = 0x0f, production has 0x0e. */ if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_PROCESSOR_P4M; + return SPEEDSTEP_CPU_P4M; break; case 7: /* @@ -272,7 +286,7 @@ unsigned int speedstep_detect_processor (void) * samples are only of B-stepping... */ if (ebx == 0x0e) - return SPEEDSTEP_PROCESSOR_P4M; + return SPEEDSTEP_CPU_P4M; break; case 9: /* @@ -288,10 +302,13 @@ unsigned int speedstep_detect_processor (void) * M-P4-Ms may have either ebx=0xe or 0xf [see above] * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id string + * For now, they are distinguished by the model_id + * string */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_PROCESSOR_P4M; + if ((ebx == 0x0e) || + (strstr(c->x86_model_id, + "Mobile Intel(R) Pentium(R) 4") != NULL)) + return SPEEDSTEP_CPU_P4M; break; default: break; @@ -301,7 +318,8 @@ unsigned int speedstep_detect_processor (void) switch (c->x86_model) { case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, + * 0x06 for mobile PIII-M */ ebx = cpuid_ebx(0x00000001); dprintk("ebx is %x\n", ebx); @@ -313,14 +331,15 @@ unsigned int speedstep_detect_processor (void) /* So far all PIII-M processors support SpeedStep. See * Intel's 24540640.pdf of June 2003 */ - return SPEEDSTEP_PROCESSOR_PIII_T; + return SPEEDSTEP_CPU_PIII_T; case 0x08: /* Intel PIII [Coppermine] */ /* all mobile PIII Coppermines have FSB 100 MHz * ==> sort out a few desktop PIIIs. */ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi); + dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", + msr_lo, msr_hi); msr_lo &= 0x00c0000; if (msr_lo != 0x0080000) return 0; @@ -332,13 +351,15 @@ unsigned int speedstep_detect_processor (void) * bit 56 or 57 is set */ rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { + dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", + msr_lo, msr_hi); + if ((msr_hi & (1<<18)) && + (relaxed_check ? 1 : (msr_hi & (3<<24)))) { if (c->x86_mask == 0x01) { dprintk("early PIII version\n"); - return SPEEDSTEP_PROCESSOR_PIII_C_EARLY; + return SPEEDSTEP_CPU_PIII_C_EARLY; } else - return SPEEDSTEP_PROCESSOR_PIII_C; + return SPEEDSTEP_CPU_PIII_C; } default: @@ -369,7 +390,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, dprintk("trying to determine both speeds\n"); /* get current speed */ - prev_speed = speedstep_get_processor_frequency(processor); + prev_speed = speedstep_get_frequency(processor); if (!prev_speed) return -EIO; @@ -379,7 +400,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, /* switch to low state */ set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_processor_frequency(processor); + *low_speed = speedstep_get_frequency(processor); if (!*low_speed) { ret = -EIO; goto out; @@ -398,7 +419,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (transition_latency) do_gettimeofday(&tv2); - *high_speed = speedstep_get_processor_frequency(processor); + *high_speed = speedstep_get_frequency(processor); if (!*high_speed) { ret = -EIO; goto out; @@ -426,9 +447,12 @@ unsigned int speedstep_get_freqs(unsigned int processor, /* check if the latency measurement is too high or too low * and set it to a safe value (500uSec) in that case */ - if (*transition_latency > 10000000 || *transition_latency < 50000) { - printk (KERN_WARNING "speedstep: frequency transition measured seems out of " - "range (%u nSec), falling back to a safe one of %u nSec.\n", + if (*transition_latency > 10000000 || + *transition_latency < 50000) { + printk(KERN_WARNING PFX "frequency transition " + "measured seems out of range (%u " + "nSec), falling back to a safe one of" + "%u nSec.\n", *transition_latency, 500000); *transition_latency = 500000; } @@ -436,15 +460,16 @@ unsigned int speedstep_get_freqs(unsigned int processor, out: local_irq_restore(flags); - return (ret); + return ret; } EXPORT_SYMBOL_GPL(speedstep_get_freqs); #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability."); +MODULE_PARM_DESC(relaxed_check, + "Don't do all checks for speedstep capability."); #endif -MODULE_AUTHOR ("Dominik Brodowski "); -MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski "); +MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h index b11bcc608cac..2b6c04e5a304 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h @@ -12,17 +12,17 @@ /* processors */ -#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ -#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ +#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */ +#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */ +#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_processor_frequency() call. */ -#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */ -#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */ -#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */ + * the speedstep_get_frequency() call. */ +#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */ +#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */ +#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */ /* speedstep states -- only two of them */ @@ -34,7 +34,7 @@ extern unsigned int speedstep_detect_processor (void); /* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_processor_frequency(unsigned int processor); +extern unsigned int speedstep_get_frequency(unsigned int processor); /* detect the low and high speeds of the processor. The callback diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index 8a85c93bd62a..befea088e4f5 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -19,8 +19,8 @@ #include #include #include +#include #include -#include #include "speedstep-lib.h" @@ -30,12 +30,12 @@ * If user gives it, these are used. * */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; +static int smi_port; +static int smi_cmd; +static unsigned int smi_sig; /* info about the processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor; /* * There are only two frequency states for each processor. Values @@ -56,12 +56,13 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { * of DMA activity going on? */ #define SMI_TRIES 5 -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-smi", msg) /** * speedstep_smi_ownership */ -static int speedstep_smi_ownership (void) +static int speedstep_smi_ownership(void) { u32 command, result, magic, dummy; u32 function = GET_SPEEDSTEP_OWNER; @@ -70,16 +71,18 @@ static int speedstep_smi_ownership (void) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); magic = virt_to_phys(magic_data); - dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port); + dprintk("trying to obtain ownership with command %x at port %x\n", + command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp\n" - : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), - "=S" (dummy) + : "=D" (result), + "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), + "=S" (dummy) : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) + "D" (0), "S" (magic) : "memory" ); @@ -97,10 +100,10 @@ static int speedstep_smi_ownership (void) * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing * shows that the latter occurs if !(ist_info.event & 0xFFFF). */ -static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) +static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) { u32 command, result = 0, edi, high_mhz, low_mhz, dummy; - u32 state=0; + u32 state = 0; u32 function = GET_SPEEDSTEP_FREQS; if (!(ist_info.event & 0xFFFF)) { @@ -110,17 +113,25 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port); + dprintk("trying to determine frequencies with command %x at port %x\n", + command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp" - : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) + : "=a" (result), + "=b" (high_mhz), + "=c" (low_mhz), + "=d" (state), "=D" (edi), "=S" (dummy) + : "a" (command), + "b" (function), + "c" (state), + "d" (smi_port), "S" (0), "D" (0) ); - dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz); + dprintk("result %x, low_freq %u, high_freq %u\n", + result, low_mhz, high_mhz); /* abort if results are obviously incorrect... */ if ((high_mhz + low_mhz) < 600) @@ -137,26 +148,30 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * */ -static int speedstep_get_state (void) +static int speedstep_get_state(void) { - u32 function=GET_SPEEDSTEP_STATE; + u32 function = GET_SPEEDSTEP_STATE; u32 result, state, edi, command, dummy; command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port); + dprintk("trying to determine current setting with command %x " + "at port %x\n", command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp\n" - : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0) + : "=a" (result), + "=b" (state), "=D" (edi), + "=c" (dummy), "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (0), + "d" (smi_port), "S" (0), "D" (0) ); dprintk("state is %x, result is %x\n", state, result); - return (state & 1); + return state & 1; } @@ -165,11 +180,11 @@ static int speedstep_get_state (void) * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * */ -static void speedstep_set_state (unsigned int state) +static void speedstep_set_state(unsigned int state) { unsigned int result = 0, command, new_state, dummy; unsigned long flags; - unsigned int function=SET_SPEEDSTEP_STATE; + unsigned int function = SET_SPEEDSTEP_STATE; unsigned int retry = 0; if (state > 0x1) @@ -180,11 +195,14 @@ static void speedstep_set_state (unsigned int state) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port); + dprintk("trying to set frequency to state %u " + "with command %x at port %x\n", + state, command, smi_port); do { if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", retry, result); + dprintk("retry %u, previous result %u, waiting...\n", + retry, result); mdelay(retry * 50); } retry++; @@ -192,20 +210,26 @@ static void speedstep_set_state (unsigned int state) "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp" - : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy), - "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) + : "=b" (new_state), "=D" (result), + "=c" (dummy), "=a" (dummy), + "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), + "d" (smi_port), "S" (0), "D" (0) ); } while ((new_state != state) && (retry <= SMI_TRIES)); /* enable IRQs */ local_irq_restore(flags); - if (new_state == state) { - dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); - } else { - printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result); - } + if (new_state == state) + dprintk("change to %u MHz succeeded after %u tries " + "with result %u\n", + (speedstep_freqs[new_state].frequency / 1000), + retry, result); + else + printk(KERN_ERR "cpufreq: change to state %u " + "failed with new_state %u and result %u\n", + state, new_state, result); return; } @@ -219,13 +243,14 @@ static void speedstep_set_state (unsigned int state) * * Sets a new CPUFreq policy/freq. */ -static int speedstep_target (struct cpufreq_policy *policy, +static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = speedstep_freqs[speedstep_get_state()].frequency; @@ -250,7 +275,7 @@ static int speedstep_target (struct cpufreq_policy *policy, * Limit must be within speedstep_low_freq and speedstep_high_freq, with * at least one border included. */ -static int speedstep_verify (struct cpufreq_policy *policy) +static int speedstep_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } @@ -259,7 +284,8 @@ static int speedstep_verify (struct cpufreq_policy *policy) static int speedstep_cpu_init(struct cpufreq_policy *policy) { int result; - unsigned int speed,state; + unsigned int speed, state; + unsigned int *low, *high; /* capability check */ if (policy->cpu != 0) @@ -272,19 +298,23 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) } /* detect low and high frequency */ - result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency); + low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; + high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; + + result = speedstep_smi_get_freqs(low, high); if (result) { - /* fall back to speedstep_lib.c dection mechanism: try both states out */ - dprintk("could not detect low and high frequencies by SMI call.\n"); + /* fall back to speedstep_lib.c dection mechanism: + * try both states out */ + dprintk("could not detect low and high frequencies " + "by SMI call.\n"); result = speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + low, high, NULL, &speedstep_set_state); if (result) { - dprintk("could not detect two different speeds -- aborting.\n"); + dprintk("could not detect two different speeds" + " -- aborting.\n"); return result; } else dprintk("workaround worked.\n"); @@ -295,7 +325,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) speed = speedstep_freqs[state].frequency; dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) + ? "low" : "high", (speed / 1000)); /* cpuinfo and default policy values */ @@ -304,7 +335,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); @@ -321,7 +352,7 @@ static unsigned int speedstep_get(unsigned int cpu) { if (cpu) return -ENODEV; - return speedstep_get_processor_frequency(speedstep_processor); + return speedstep_get_frequency(speedstep_processor); } @@ -335,7 +366,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) return result; } -static struct freq_attr* speedstep_attr[] = { +static struct freq_attr *speedstep_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -364,21 +395,23 @@ static int __init speedstep_init(void) speedstep_processor = speedstep_detect_processor(); switch (speedstep_processor) { - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: break; default: speedstep_processor = 0; } if (!speedstep_processor) { - dprintk ("No supported Intel CPU detected.\n"); + dprintk("No supported Intel CPU detected.\n"); return -ENODEV; } - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); + dprintk("signature:0x%.8lx, command:0x%.8lx, " + "event:0x%.8lx, perf_level:0x%.8lx.\n", + ist_info.signature, ist_info.command, + ist_info.event, ist_info.perf_level); /* Error if no IST-SMI BIOS or no PARM sig= 'ISGE' aka 'Intel Speedstep Gate E' */ @@ -416,17 +449,20 @@ static void __exit speedstep_exit(void) cpufreq_unregister_driver(&speedstep_driver); } -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); +module_param(smi_port, int, 0444); +module_param(smi_cmd, int, 0444); +module_param(smi_sig, uint, 0444); -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface."); +MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " + "-- Intel's default setting is 0xb2"); +MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " + "-- Intel's default setting is 0x82"); +MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " + "SMI interface."); -MODULE_AUTHOR ("Hiroshi Miura"); -MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Hiroshi Miura"); +MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); +MODULE_LICENSE("GPL"); module_init(speedstep_init); module_exit(speedstep_exit); -- cgit v1.2.3 From b9e7638a301b1245d4675087a05fa90fb4fa1845 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 00:32:26 -0500 Subject: [CPUFREQ] checkpatch cleanups for powernow-k7 The asm/timer.h warning can be ignored, it's needed for recalibrate_cpu_khz() Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 237 +++++++++++++++++------------- 1 file changed, 137 insertions(+), 100 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index 9cd73d157437..3c28ccd49742 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -6,10 +6,12 @@ * Licensed under the terms of the GNU GPL License version 2. * Based upon datasheets & sample CPUs kindly provided by AMD. * - * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. + * Errata 5: + * CPU may fail to execute a FID/VID change in presence of interrupt. + * - We cli/sti on stepping A0 CPUs around the FID/VID transition. + * Errata 15: + * CPU with half frequency multipliers may hang upon wakeup from disconnect. + * - We disable half multipliers if ACPI is used on A0 stepping CPUs. */ #include @@ -20,11 +22,11 @@ #include #include #include +#include +#include +#include /* Needed for recalibrate_cpu_khz() */ #include -#include -#include -#include #include #ifdef CONFIG_X86_POWERNOW_K7_ACPI @@ -58,9 +60,9 @@ struct pst_s { union powernow_acpi_control_t { struct { unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; + vid:5, + sgtc:20, + res1:2; } bits; unsigned long val; }; @@ -101,7 +103,8 @@ static unsigned int fsb; static unsigned int latency; static char have_a0; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "powernow-k7", msg) static int check_fsb(unsigned int fsbspeed) { @@ -109,7 +112,7 @@ static int check_fsb(unsigned int fsbspeed) unsigned int f = fsb / 1000; delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return (delta < 5); + return delta < 5; } static int check_powernow(void) @@ -117,24 +120,26 @@ static int check_powernow(void) struct cpuinfo_x86 *c = &cpu_data(0); unsigned int maxei, eax, ebx, ecx, edx; - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) { + if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) { #ifdef MODULE - printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n"); + printk(KERN_INFO PFX "This module only works with " + "AMD K7 CPUs\n"); #endif return 0; } /* Get maximum capabilities */ - maxei = cpuid_eax (0x80000000); + maxei = cpuid_eax(0x80000000); if (maxei < 0x80000007) { /* Any powernow info ? */ #ifdef MODULE - printk (KERN_INFO PFX "No powernow capabilities detected\n"); + printk(KERN_INFO PFX "No powernow capabilities detected\n"); #endif return 0; } if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n"); + printk(KERN_INFO PFX "K7 660[A0] core detected, " + "enabling errata workarounds\n"); have_a0 = 1; } @@ -144,37 +149,42 @@ static int check_powernow(void) if (!(edx & (1 << 1 | 1 << 2))) return 0; - printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); if (edx & 1 << 1) { - printk ("frequency"); - can_scale_bus=1; + printk("frequency"); + can_scale_bus = 1; } if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk (" and "); + printk(" and "); if (edx & 1 << 2) { - printk ("voltage"); - can_scale_vid=1; + printk("voltage"); + can_scale_vid = 1; } - printk (".\n"); + printk(".\n"); return 1; } +static void invalidate_entry(unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} -static int get_ranges (unsigned char *pst) +static int get_ranges(unsigned char *pst) { unsigned int j; unsigned int speed; u8 fid, vid; - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * + (number_scales + 1)), GFP_KERNEL); if (!powernow_table) return -ENOMEM; - for (j=0 ; j < number_scales; j++) { + for (j = 0 ; j < number_scales; j++) { fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; @@ -182,10 +192,10 @@ static int get_ranges (unsigned char *pst) speed = powernow_table[j].frequency; - if ((fid_codes[fid] % 10)==5) { + if ((fid_codes[fid] % 10) == 5) { #ifdef CONFIG_X86_POWERNOW_K7_ACPI if (have_a0 == 1) - powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(j); #endif } @@ -197,7 +207,7 @@ static int get_ranges (unsigned char *pst) vid = *pst++; powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, @@ -214,13 +224,13 @@ static void change_FID(int fid) { union msr_fidvidctl fidvidctl; - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); if (fidvidctl.bits.FID != fid) { fidvidctl.bits.SGTC = latency; fidvidctl.bits.FID = fid; fidvidctl.bits.VIDC = 0; fidvidctl.bits.FIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); } } @@ -229,18 +239,18 @@ static void change_VID(int vid) { union msr_fidvidctl fidvidctl; - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); if (fidvidctl.bits.VID != vid) { fidvidctl.bits.SGTC = latency; fidvidctl.bits.VID = vid; fidvidctl.bits.FIDC = 0; fidvidctl.bits.VIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); } } -static void change_speed (unsigned int index) +static void change_speed(unsigned int index) { u8 fid, vid; struct cpufreq_freqs freqs; @@ -257,7 +267,7 @@ static void change_speed (unsigned int index) freqs.cpu = 0; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; freqs.old = fsb * fid_codes[cfid] / 10; @@ -321,12 +331,14 @@ static int powernow_acpi_init(void) goto err1; } - if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_perf->control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { retval = -ENODEV; goto err2; } - if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_perf->status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { retval = -ENODEV; goto err2; } @@ -338,7 +350,8 @@ static int powernow_acpi_init(void) goto err2; } - powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * + (number_scales + 1)), GFP_KERNEL); if (!powernow_table) { retval = -ENOMEM; goto err2; @@ -352,7 +365,7 @@ static int powernow_acpi_init(void) unsigned int speed, speed_mhz; pc.val = (unsigned long) state->control; - dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", + dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", i, (u32) state->core_frequency, (u32) state->power, @@ -381,12 +394,12 @@ static int powernow_acpi_init(void) if (speed % 1000 > 0) speed_mhz++; - if ((fid_codes[fid] % 10)==5) { + if ((fid_codes[fid] % 10) == 5) { if (have_a0 == 1) - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(i); } - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, fid_codes[fid] % 10, speed_mhz, vid, mobile_vid_table[vid]/1000, @@ -422,7 +435,8 @@ err1: err05: kfree(acpi_processor_perf); err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n"); + printk(KERN_WARNING PFX "ACPI perflib can not be used on " + "this platform\n"); acpi_processor_perf = NULL; return retval; } @@ -435,7 +449,14 @@ static int powernow_acpi_init(void) } #endif -static int powernow_decode_bios (int maxfid, int startvid) +static void print_pst_entry(struct pst_s *pst, unsigned int j) +{ + dprintk("PST:%d (@%p)\n", j, pst); + dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); +} + +static int powernow_decode_bios(int maxfid, int startvid) { struct psb_s *psb; struct pst_s *pst; @@ -446,61 +467,67 @@ static int powernow_decode_bios (int maxfid, int startvid) etuple = cpuid_eax(0x80000001); - for (i=0xC0000; i < 0xffff0 ; i+=16) { + for (i = 0xC0000; i < 0xffff0 ; i += 16) { p = phys_to_virt(i); - if (memcmp(p, "AMDK7PNOW!", 10) == 0){ - dprintk ("Found PSB header at %p\n", p); + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + dprintk("Found PSB header at %p\n", p); psb = (struct psb_s *) p; - dprintk ("Table version: 0x%x\n", psb->tableversion); + dprintk("Table version: 0x%x\n", psb->tableversion); if (psb->tableversion != 0x12) { - printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); + printk(KERN_INFO PFX "Sorry, only v1.2 tables" + " supported right now\n"); return -ENODEV; } - dprintk ("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1)==0) { - dprintk ("Mobile voltage regulator\n"); - } else { - dprintk ("Desktop voltage regulator\n"); - } + dprintk("Flags: 0x%x\n", psb->flags); + if ((psb->flags & 1) == 0) + dprintk("Mobile voltage regulator\n"); + else + dprintk("Desktop voltage regulator\n"); latency = psb->settlingtime; if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. " - "Should be at least 100. Correcting.\n", latency); + printk(KERN_INFO PFX "BIOS set settling time " + "to %d microseconds. " + "Should be at least 100. " + "Correcting.\n", latency); latency = 100; } - dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime); - dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); + dprintk("Settling Time: %d microseconds.\n", + psb->settlingtime); + dprintk("Has %d PST tables. (Only dumping ones " + "relevant to this CPU).\n", + psb->numpst); - p += sizeof (struct psb_s); + p += sizeof(struct psb_s); pst = (struct pst_s *) p; - for (j=0; jnumpst; j++) { + for (j = 0; j < psb->numpst; j++) { pst = (struct pst_s *) p; number_scales = pst->numpstates; - if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && - (maxfid==pst->maxfid) && (startvid==pst->startvid)) - { - dprintk ("PST:%d (@%p)\n", j, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); - - ret = get_ranges ((char *) pst + sizeof (struct pst_s)); + if ((etuple == pst->cpuid) && + check_fsb(pst->fsbspeed) && + (maxfid == pst->maxfid) && + (startvid == pst->startvid)) { + print_pst_entry(pst, j); + p = (char *)pst + sizeof(struct pst_s); + ret = get_ranges(p); return ret; } else { unsigned int k; - p = (char *) pst + sizeof (struct pst_s); - for (k=0; kident); - printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n"); + printk(KERN_WARNING PFX + "%s laptop with broken PST tables in BIOS detected.\n", + d->ident); + printk(KERN_WARNING PFX + "You need to downgrade to 3A21 (09/09/2002), or try a newer " + "BIOS than 3A71 (01/20/2003)\n"); + printk(KERN_WARNING PFX + "cpufreq scaling has been disabled as a result of this.\n"); return 0; } @@ -598,7 +631,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = { { } }; -static int __init powernow_cpu_init (struct cpufreq_policy *policy) +static int __init powernow_cpu_init(struct cpufreq_policy *policy) { union msr_fidvidstatus fidvidstatus; int result; @@ -606,7 +639,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) if (policy->cpu != 0) return -ENODEV; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); recalibrate_cpu_khz(); @@ -618,19 +651,21 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); + printk(KERN_INFO PFX "PSB/PST known to be broken. " + "Trying ACPI instead\n"); result = powernow_acpi_init(); } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); + result = powernow_decode_bios(fidvidstatus.bits.MFID, + fidvidstatus.bits.SVID); if (result) { - printk (KERN_INFO PFX "Trying ACPI perflib\n"); + printk(KERN_INFO PFX "Trying ACPI perflib\n"); maximum_speed = 0; minimum_speed = -1; latency = 0; result = powernow_acpi_init(); if (result) { - printk (KERN_INFO PFX "ACPI and legacy methods failed\n"); - printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n"); + printk(KERN_INFO PFX + "ACPI and legacy methods failed\n"); } } else { /* SGTC use the bus clock as timer */ @@ -642,10 +677,11 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) if (result) return result; - printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", + printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", minimum_speed/1000, maximum_speed/1000); - policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); + policy->cpuinfo.transition_latency = + cpufreq_scale(2000000UL, fsb, latency); policy->cur = powernow_get(0); @@ -654,7 +690,8 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) return cpufreq_frequency_table_cpuinfo(policy, powernow_table); } -static int powernow_cpu_exit (struct cpufreq_policy *policy) { +static int powernow_cpu_exit(struct cpufreq_policy *policy) +{ cpufreq_frequency_table_put_attr(policy->cpu); #ifdef CONFIG_X86_POWERNOW_K7_ACPI @@ -669,7 +706,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) { return 0; } -static struct freq_attr* powernow_table_attr[] = { +static struct freq_attr *powernow_table_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -685,15 +722,15 @@ static struct cpufreq_driver powernow_driver = { .attr = powernow_table_attr, }; -static int __init powernow_init (void) +static int __init powernow_init(void) { - if (check_powernow()==0) + if (check_powernow() == 0) return -ENODEV; return cpufreq_register_driver(&powernow_driver); } -static void __exit powernow_exit (void) +static void __exit powernow_exit(void) { cpufreq_unregister_driver(&powernow_driver); } @@ -701,9 +738,9 @@ static void __exit powernow_exit (void) module_param(acpi_force, int, 0444); MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); -MODULE_AUTHOR ("Dave Jones "); -MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones "); +MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); +MODULE_LICENSE("GPL"); late_initcall(powernow_init); module_exit(powernow_exit); -- cgit v1.2.3 From 2b03f891ad3804dd3fa4dadfd33e5dcb200389c5 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 18 Jan 2009 01:43:44 -0500 Subject: [CPUFREQ] checkpatch cleanups for ondemand governor. Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_ondemand.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 6f45b1658a67..1fa4420eb33c 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -65,14 +65,14 @@ struct cpu_dbs_info_s { cputime64_t prev_cpu_wall; cputime64_t prev_cpu_nice; struct cpufreq_policy *cur_policy; - struct delayed_work work; + struct delayed_work work; struct cpufreq_frequency_table *freq_table; unsigned int freq_lo; unsigned int freq_lo_jiffies; unsigned int freq_hi_jiffies; int cpu; unsigned int enable:1, - sample_type:1; + sample_type:1; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); @@ -203,12 +203,12 @@ static void ondemand_powersave_bias_init(void) /************************** sysfs interface ************************/ static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) { - return sprintf (buf, "%u\n", MAX_SAMPLING_RATE); + return sprintf(buf, "%u\n", MAX_SAMPLING_RATE); } static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) { - return sprintf (buf, "%u\n", MIN_SAMPLING_RATE); + return sprintf(buf, "%u\n", MIN_SAMPLING_RATE); } #define define_one_ro(_name) \ @@ -279,14 +279,14 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, unsigned int j; ret = sscanf(buf, "%u", &input); - if ( ret != 1 ) + if (ret != 1) return -EINVAL; - if ( input > 1 ) + if (input > 1) input = 1; mutex_lock(&dbs_mutex); - if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ + if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */ mutex_unlock(&dbs_mutex); return count; } @@ -337,7 +337,7 @@ define_one_rw(up_threshold); define_one_rw(ignore_nice_load); define_one_rw(powersave_bias); -static struct attribute * dbs_attributes[] = { +static struct attribute *dbs_attributes[] = { &sampling_rate_max.attr, &sampling_rate_min.attr, &sampling_rate.attr, @@ -512,8 +512,7 @@ static void do_dbs_timer(struct work_struct *work) } } else { __cpufreq_driver_target(dbs_info->cur_policy, - dbs_info->freq_lo, - CPUFREQ_RELATION_H); + dbs_info->freq_lo, CPUFREQ_RELATION_H); } queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); unlock_policy_rwsem_write(cpu); @@ -530,7 +529,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) dbs_info->sample_type = DBS_NORMAL_SAMPLE; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work, - delay); + delay); } static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) @@ -617,12 +616,10 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, mutex_lock(&dbs_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, - policy->max, - CPUFREQ_RELATION_H); + policy->max, CPUFREQ_RELATION_H); else if (policy->min > this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, - policy->min, - CPUFREQ_RELATION_L); + policy->min, CPUFREQ_RELATION_L); mutex_unlock(&dbs_mutex); break; } @@ -677,7 +674,7 @@ static void __exit cpufreq_gov_dbs_exit(void) MODULE_AUTHOR("Venkatesh Pallipadi "); MODULE_AUTHOR("Alexey Starikovskiy "); MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " - "Low Latency Frequency Transition capable processors"); + "Low Latency Frequency Transition capable processors"); MODULE_LICENSE("GPL"); #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND -- cgit v1.2.3 From 0e64a0c982c06a6b8f5e2a7f29eb108fdf257b2f Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 4 Feb 2009 14:37:50 -0500 Subject: [CPUFREQ] checkpatch cleanups for powernow-k8 This driver has so many long function names, and deep nested if's The remaining warnings will need some code restructuring to clean up. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 351 +++++++++++++++++++----------- 1 file changed, 226 insertions(+), 125 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 6428aa17b40e..4dd7e3bdee23 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -33,10 +33,10 @@ #include #include #include /* for current / set_cpus_allowed() */ +#include +#include #include -#include -#include #ifdef CONFIG_X86_POWERNOW_K8_ACPI #include @@ -71,7 +71,8 @@ static u32 find_khz_freq_from_fid(u32 fid) return 1000 * find_freq_from_fid(fid); } -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate) +static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, + u32 pstate) { return data[pstate].frequency; } @@ -186,7 +187,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) return 1; } - lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + lo = fid; + lo |= (data->currvid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", fid, lo, data->plllock * PLL_LOCK_CONVERSION); @@ -194,7 +197,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) do { wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); if (i++ > 100) { - printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n"); + printk(KERN_ERR PFX + "Hardware error - pending bit very stuck - " + "no further pstate changes possible\n"); return 1; } } while (query_current_values_with_pending_wait(data)); @@ -202,14 +207,16 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) count_off_irt(data); if (savevid != data->currvid) { - printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); + printk(KERN_ERR PFX + "vid change on fid trans, old 0x%x, new 0x%x\n", + savevid, data->currvid); return 1; } if (fid != data->currfid) { - printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); + printk(KERN_ERR PFX + "fid trans failed, fid 0x%x, curr 0x%x\n", fid, + data->currfid); return 1; } @@ -228,7 +235,9 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) return 1; } - lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + lo = data->currfid; + lo |= (vid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", vid, lo, STOP_GRANT_5NS); @@ -236,20 +245,24 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) do { wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); + printk(KERN_ERR PFX "internal error - pending bit " + "very stuck - no further pstate " + "changes possible\n"); return 1; } } while (query_current_values_with_pending_wait(data)); if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n", + printk(KERN_ERR PFX "fid changed on vid trans, old " + "0x%x new 0x%x\n", savefid, data->currfid); return 1; } if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid, - data->currvid); + printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " + "curr 0x%x\n", + vid, data->currvid); return 1; } @@ -261,7 +274,8 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) * Decreasing vid codes represent increasing voltages: * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) +static int decrease_vid_code_by_step(struct powernow_k8_data *data, + u32 reqvid, u32 step) { if ((data->currvid - reqvid) > step) reqvid = data->currvid - step; @@ -283,7 +297,8 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate) } /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) +static int transition_fid_vid(struct powernow_k8_data *data, + u32 reqfid, u32 reqvid) { if (core_voltage_pre_transition(data, reqvid)) return 1; @@ -298,7 +313,8 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req return 1; if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", + printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " + "curr 0x%x 0x%x\n", smp_processor_id(), reqfid, reqvid, data->currfid, data->currvid); return 1; @@ -311,13 +327,15 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req } /* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid) +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid) { u32 rvosteps = data->rvo; u32 savefid = data->currfid; u32 maxvid, lo; - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", + dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " + "reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); @@ -340,7 +358,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid - 1, 1)) + if (decrease_vid_code_by_step(data, data->currvid-1, 1)) return 1; rvosteps--; } @@ -350,7 +368,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid); + printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", + data->currfid); return 1; } @@ -363,20 +382,24 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid /* Phase 2 - core frequency transition */ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) { - u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid; + u32 vcoreqfid, vcocurrfid, vcofiddiff; + u32 fid_interval, savevid = data->currvid; - if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n", - reqfid, data->currfid); + if ((reqfid < HI_FID_TABLE_BOTTOM) && + (data->currfid < HI_FID_TABLE_BOTTOM)) { + printk(KERN_ERR PFX "ph2: illegal lo-lo transition " + "0x%x 0x%x\n", reqfid, data->currfid); return 1; } if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); + printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", + data->currfid); return 0; } - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", + dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " + "reqfid 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqfid); @@ -390,14 +413,14 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) if (reqfid > data->currfid) { if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, data->currfid + fid_interval)) { + if (write_new_fid(data, + data->currfid + fid_interval)) return 1; - } } else { if (write_new_fid - (data, 2 + convert_fid_to_vco_fid(data->currfid))) { + (data, + 2 + convert_fid_to_vco_fid(data->currfid))) return 1; - } } } else { if (write_new_fid(data, data->currfid - fid_interval)) @@ -417,7 +440,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) if (data->currfid != reqfid) { printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", + "ph2: mismatch, failed fid transition, " + "curr 0x%x, req 0x%x\n", data->currfid, reqfid); return 1; } @@ -435,7 +459,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) } /* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid) +static int core_voltage_post_transition(struct powernow_k8_data *data, + u32 reqvid) { u32 savefid = data->currfid; u32 savereqvid = reqvid; @@ -457,7 +482,8 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi if (data->currvid != reqvid) { printk(KERN_ERR PFX - "ph3: failed vid transition\n, req 0x%x, curr 0x%x", + "ph3: failed vid transition\n, " + "req 0x%x, curr 0x%x", reqvid, data->currvid); return 1; } @@ -508,7 +534,8 @@ static int check_supported_cpu(unsigned int cpu) if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); + printk(KERN_INFO PFX + "Processor cpuid %x not supported\n", eax); goto out; } @@ -520,8 +547,10 @@ static int check_supported_cpu(unsigned int cpu) } cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX "Power state transitions not supported\n"); + if ((edx & P_STATE_TRANSITION_CAPABLE) + != P_STATE_TRANSITION_CAPABLE) { + printk(KERN_INFO PFX + "Power state transitions not supported\n"); goto out; } } else { /* must be a HW Pstate capable processor */ @@ -539,7 +568,8 @@ out: return rc; } -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, + u8 maxvid) { unsigned int j; u8 lastfid = 0xff; @@ -550,12 +580,14 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 j, pst[j].vid); return -EINVAL; } - if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */ + if (pst[j].vid < data->rvo) { + /* vid + rvo >= 0 */ printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" " %d\n", j); return -ENODEV; } - if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */ + if (pst[j].vid < maxvid + data->rvo) { + /* vid + rvo >= maxvid */ printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" " %d\n", j); return -ENODEV; @@ -579,23 +611,31 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 return -EINVAL; } if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO FW_BUG PFX "first fid not from lo freq table\n"); + printk(KERN_INFO FW_BUG PFX + "first fid not from lo freq table\n"); return 0; } +static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry) +{ + data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} + static void print_basics(struct powernow_k8_data *data) { int j; for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { + if (data->powernow_table[j].frequency != + CPUFREQ_ENTRY_INVALID) { if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX " %d : pstate %d (%d MHz)\n", - j, + printk(KERN_INFO PFX + " %d : pstate %d (%d MHz)\n", j, data->powernow_table[j].index, data->powernow_table[j].frequency/1000); } else { - printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", + printk(KERN_INFO PFX + " %d : fid 0x%x (%d MHz), vid 0x%x\n", j, data->powernow_table[j].index & 0xff, data->powernow_table[j].frequency/1000, @@ -604,20 +644,25 @@ static void print_basics(struct powernow_k8_data *data) } } if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps); + printk(KERN_INFO PFX "Only %d pstates on battery\n", + data->batps); } -static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +static int fill_powernow_table(struct powernow_k8_data *data, + struct pst_s *pst, u8 maxvid) { struct cpufreq_frequency_table *powernow_table; unsigned int j; - if (data->batps) { /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps); + if (data->batps) { + /* use ACPI support to get full speed on mains power */ + printk(KERN_WARNING PFX + "Only %d pstates usable (use ACPI driver for full " + "range\n", data->batps); data->numps = data->batps; } - for ( j=1; jnumps; j++ ) { + for (j = 1; j < data->numps; j++) { if (pst[j-1].fid >= pst[j].fid) { printk(KERN_ERR PFX "PST out of sequence\n"); return -EINVAL; @@ -640,9 +685,11 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, } for (j = 0; j < data->numps; j++) { + int freq; powernow_table[j].index = pst[j].fid; /* lower 8 bits */ powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid); + freq = find_khz_freq_from_fid(pst[j].fid); + powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; powernow_table[data->numps].index = 0; @@ -658,7 +705,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, print_basics(data); for (j = 0; j < data->numps; j++) - if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid)) + if ((pst[j].fid == data->currfid) && + (pst[j].vid == data->currvid)) return 0; dprintk("currfid/vid do not match PST, ignoring\n"); @@ -698,7 +746,8 @@ static int find_psb_table(struct powernow_k8_data *data) } data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", data->vstable); + dprintk("voltage stabilization time: %d(*20us)\n", + data->vstable); dprintk("flags2: 0x%x\n", psb->flags2); data->rvo = psb->flags2 & 3; @@ -713,11 +762,12 @@ static int find_psb_table(struct powernow_k8_data *data) dprintk("numpst: 0x%x\n", psb->num_tables); cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){ + if ((psb->cpuid == 0x00000fc0) || + (psb->cpuid == 0x00000fe0)) { thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) { + if ((thiscpuid == 0x00000fc0) || + (thiscpuid == 0x00000fe0)) cpst = 1; - } } if (cpst != 1) { printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); @@ -732,7 +782,8 @@ static int find_psb_table(struct powernow_k8_data *data) data->numps = psb->numps; dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid); + return fill_powernow_table(data, + (struct pst_s *)(psb+1), maxvid); } /* * If you see this message, complain to BIOS manufacturer. If @@ -750,23 +801,27 @@ static int find_psb_table(struct powernow_k8_data *data) } #ifdef CONFIG_X86_POWERNOW_K8_ACPI -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, + unsigned int index) { + acpi_integer control; + if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) return; - data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; -} + control = data->acpi_data.states[index].control; data->irt = (control + >> IRT_SHIFT) & IRT_MASK; data->rvo = (control >> + RVO_SHIFT) & RVO_MASK; data->exttype = (control + >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1 + << ((control >> MVS_SHIFT) & MVS_MASK); data->vstable = + (control >> VST_SHIFT) & VST_MASK; } static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; + acpi_integer space_id; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -779,11 +834,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + space_id = data->acpi_data.control_register.space_id; + if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", data->acpi_data.control_register.space_id, - data->acpi_data.status_register.space_id); + space_id); goto err_out; } @@ -802,7 +858,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) if (ret_val) goto err_out_mem; - powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; + powernow_table[data->acpi_data.state_count].frequency = + CPUFREQ_TABLE_END; powernow_table[data->acpi_data.state_count].index = 0; data->powernow_table = powernow_table; @@ -830,13 +887,15 @@ err_out_mem: err_out: acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */ + /* data->acpi_data.state_count informs us at ->exit() + * whether ACPI was used */ data->acpi_data.state_count = 0; return ret_val; } -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +static int fill_powernow_table_pstate(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) { int i; u32 hi = 0, lo = 0; @@ -848,84 +907,101 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf index = data->acpi_data.states[i].control & HW_PSTATE_MASK; if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + printk(KERN_ERR PFX "invalid pstate %d - " + "bad value %d.\n", i, index); + printk(KERN_ERR PFX "Please report to BIOS " + "manufacturer\n"); + invalidate_entry(data, i); continue; } rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); if (!(hi & HW_PSTATE_VALID_MASK)) { dprintk("invalid pstate %d, ignoring\n", index); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(data, i); continue; } powernow_table[i].index = index; - powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; + powernow_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; } return 0; } -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) { int i; int cntlofreq = 0; + for (i = 0; i < data->acpi_data.state_count; i++) { u32 fid; u32 vid; + u32 freq, index; + acpi_integer status, control; if (data->exttype) { - fid = data->acpi_data.states[i].status & EXT_FID_MASK; - vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK; + status = data->acpi_data.states[i].status; + fid = status & EXT_FID_MASK; + vid = (status >> VID_SHIFT) & EXT_VID_MASK; } else { - fid = data->acpi_data.states[i].control & FID_MASK; - vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + control = data->acpi_data.states[i].control; + fid = control & FID_MASK; + vid = (control >> VID_SHIFT) & VID_MASK; } dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - powernow_table[i].frequency = find_khz_freq_from_fid(fid); + index = fid | (vid<<8); + powernow_table[i].index = index; + + freq = find_khz_freq_from_fid(fid); + powernow_table[i].frequency = freq; /* verify frequency is OK */ - if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) || - (powernow_table[i].frequency < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { + dprintk("invalid freq %u kHz, ignoring\n", freq); + invalidate_entry(data, i); continue; } - /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ + /* verify voltage is OK - + * BIOSs are using "off" to indicate invalid */ if (vid == VID_OFF) { dprintk("invalid vid %u, ignoring\n", vid); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(data, i); continue; } /* verify only 1 entry from the lo frequency table */ if (fid < HI_FID_TABLE_BOTTOM) { if (cntlofreq) { - /* if both entries are the same, ignore this one ... */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); + /* if both entries are the same, + * ignore this one ... */ + if ((freq != powernow_table[cntlofreq].frequency) || + (index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX + "Too many lo freq table " + "entries\n"); return 1; } - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + dprintk("double low frequency table entry, " + "ignoring it.\n"); + invalidate_entry(data, i); continue; } else cntlofreq = i; } - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { + printk(KERN_INFO PFX "invalid freq entries " + "%u kHz vs. %u kHz\n", freq, + (unsigned int) + (data->acpi_data.states[i].core_frequency + * 1000)); + invalidate_entry(data, i); continue; } } @@ -935,7 +1011,8 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); + acpi_processor_unregister_performance(&data->acpi_data, + data->cpu); free_cpumask_var(data->acpi_data.shared_cpu_map); } @@ -954,14 +1031,25 @@ static int get_transition_latency(struct powernow_k8_data *data) } #else -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; } -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; } -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; } +static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) +{ + return -ENODEV; +} +static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) +{ + return; +} +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, + unsigned int index) +{ + return; +} static int get_transition_latency(struct powernow_k8_data *data) { return 0; } #endif /* CONFIG_X86_POWERNOW_K8_ACPI */ /* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index) +static int transition_frequency_fidvid(struct powernow_k8_data *data, + unsigned int index) { u32 fid = 0; u32 vid = 0; @@ -989,7 +1077,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i return 0; } - if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { + if ((fid < HI_FID_TABLE_BOTTOM) && + (data->currfid < HI_FID_TABLE_BOTTOM)) { printk(KERN_ERR PFX "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); @@ -1017,7 +1106,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i } /* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) +static int transition_frequency_pstate(struct powernow_k8_data *data, + unsigned int index) { u32 pstate = 0; int res, i; @@ -1029,7 +1119,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i pstate = index & HW_PSTATE_MASK; if (pstate > data->max_hw_pstate) return 0; - freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + freqs.old = find_khz_freq_from_pstate(data->powernow_table, + data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask_nr(i, *(data->available_cores)) { @@ -1048,7 +1139,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i } /* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) +static int powernowk8_target(struct cpufreq_policy *pol, + unsigned targfreq, unsigned relation) { cpumask_t oldmask; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); @@ -1087,14 +1179,18 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi dprintk("targ: curr fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - if ((checkvid != data->currvid) || (checkfid != data->currfid)) { + if ((checkvid != data->currvid) || + (checkfid != data->currfid)) { printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + "error - out of sync, fix 0x%x 0x%x, " + "vid 0x%x 0x%x\n", + checkfid, data->currfid, + checkvid, data->currvid); } } - if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) + if (cpufreq_frequency_table_target(pol, data->powernow_table, + targfreq, relation, &newstate)) goto err_out; mutex_lock(&fidvid_mutex); @@ -1114,7 +1210,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi mutex_unlock(&fidvid_mutex); if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, + newstate); else pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -1164,10 +1261,11 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) */ if (num_online_cpus() != 1) { #ifndef CONFIG_ACPI_PROCESSOR - printk(KERN_ERR PFX "ACPI Processor support is required " - "for SMP systems but is absent. Please load the " - "ACPI Processor module before starting this " - "driver.\n"); + printk(KERN_ERR PFX + "ACPI Processor support is required for " + "SMP systems but is absent. Please load the " + "ACPI Processor module before starting this " + "driver.\n"); #else printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide" " ACPI _PSS objects in a way that Linux " @@ -1228,7 +1326,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) data->available_cores = pol->cpus; if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, + data->currpstate); else pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); @@ -1245,7 +1344,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate); + dprintk("cpu_init done, current pstate 0x%x\n", + data->currpstate); else dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1262,7 +1362,7 @@ err_out: return -ENODEV; } -static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) +static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) { struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); @@ -1279,7 +1379,7 @@ static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) return 0; } -static unsigned int powernowk8_get (unsigned int cpu) +static unsigned int powernowk8_get(unsigned int cpu) { struct powernow_k8_data *data; cpumask_t oldmask = current->cpus_allowed; @@ -1315,7 +1415,7 @@ out: return khz; } -static struct freq_attr* powernow_k8_attr[] = { +static struct freq_attr *powernow_k8_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -1360,7 +1460,8 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt and Mark Langsdorf "); +MODULE_AUTHOR("Paul Devriendt and " + "Mark Langsdorf "); MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ed12978453a3845c947695e7ad32bb3ede444813 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 4 Feb 2009 01:17:41 +0100 Subject: [CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency It's not only useful for the ondemand and conservative governors, but also for userspace daemons to know about the HW transition latency of the CPU. It is especially useful for userspace to know about this value when the ondemand or conservative governors are run. The sampling rate control value depends on it and for userspace being able to set sane tuning values there it has to know about the transition latency. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- Documentation/cpu-freq/user-guide.txt | 12 ++++++++++++ drivers/cpufreq/cpufreq.c | 3 +++ 2 files changed, 15 insertions(+) diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 917918f84fc7..75f41193f3e1 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -152,6 +152,18 @@ cpuinfo_min_freq : this file shows the minimum operating frequency the processor can run at(in kHz) cpuinfo_max_freq : this file shows the maximum operating frequency the processor can run at(in kHz) +cpuinfo_transition_latency The time it takes on this CPU to + switch between two frequencies in nano + seconds. If unknown or known to be + that high that the driver does not + work with the ondemand governor, -1 + (CPUFREQ_ETERNAL) will be returned. + Using this information can be useful + to choose an appropriate polling + frequency for a kernel governor or + userspace daemon. Make sure to not + switch the frequency too often + resulting in performance loss. scaling_driver : this file shows what cpufreq driver is used to set the frequency on this CPU diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 1867dac35aff..6fe466efb0b5 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -452,6 +452,7 @@ static ssize_t show_##file_name \ show_one(cpuinfo_min_freq, cpuinfo.min_freq); show_one(cpuinfo_max_freq, cpuinfo.max_freq); +show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); show_one(scaling_min_freq, min); show_one(scaling_max_freq, max); show_one(scaling_cur_freq, cur); @@ -659,6 +660,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name) define_one_ro0400(cpuinfo_cur_freq); define_one_ro(cpuinfo_min_freq); define_one_ro(cpuinfo_max_freq); +define_one_ro(cpuinfo_transition_latency); define_one_ro(scaling_available_governors); define_one_ro(scaling_driver); define_one_ro(scaling_cur_freq); @@ -672,6 +674,7 @@ define_one_rw(scaling_setspeed); static struct attribute *default_attrs[] = { &cpuinfo_min_freq.attr, &cpuinfo_max_freq.attr, + &cpuinfo_transition_latency.attr, &scaling_min_freq.attr, &scaling_max_freq.attr, &affected_cpus.attr, -- cgit v1.2.3 From 57f4fa699195b761cbea90db5e38b4bc15610c7c Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 4 Feb 2009 01:17:45 +0100 Subject: [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support powernow-k8 driver should always try to get cpufreq info from ACPI. Otherwise it will not be able to detect the transition latency correctly which results in ondemand governor taking a wrong sampling rate which will then result in sever performance loss. Let the user not shoot himself in the foot and always compile in ACPI support for powernow-k8. This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and #ifndef CONFIG_ACPI_PROCESSOR path is chosen. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/Kconfig | 19 ++----------------- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 28 ---------------------------- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 5 +---- 3 files changed, 3 insertions(+), 49 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig index 65792c2cc462..52c839875478 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -87,30 +87,15 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE + depends on ACPI && ACPI_PROCESSOR help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. To compile this driver as a module, choose M here: the module will be called powernow-k8. For details, take a look at . - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - prompt "ACPI Support" if X86_32 - depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - help - This provides access to the K8s Processor Performance States via ACPI. - This driver is probably required for CPUFreq to work with multi-socket and - SMP systems. It is not required on at least some single-socket yet - multi-core systems, even if SMP is enabled. - - It is safe to say Y here. - config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" depends on X86_32 && PCI diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 4dd7e3bdee23..acc06b03194e 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -38,11 +38,9 @@ #include -#ifdef CONFIG_X86_POWERNOW_K8_ACPI #include #include #include -#endif #define PFX "powernow-k8: " #define VERSION "version 2.20.00" @@ -800,7 +798,6 @@ static int find_psb_table(struct powernow_k8_data *data) return -ENODEV; } -#ifdef CONFIG_X86_POWERNOW_K8_ACPI static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { @@ -1030,23 +1027,6 @@ static int get_transition_latency(struct powernow_k8_data *data) return 1000 * max_latency; } -#else -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) -{ - return -ENODEV; -} -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) -{ - return; -} -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, - unsigned int index) -{ - return; -} -static int get_transition_latency(struct powernow_k8_data *data) { return 0; } -#endif /* CONFIG_X86_POWERNOW_K8_ACPI */ - /* Take a frequency, and issue the fid/vid transition command */ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index) @@ -1260,19 +1240,11 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { -#ifndef CONFIG_ACPI_PROCESSOR - printk(KERN_ERR PFX - "ACPI Processor support is required for " - "SMP systems but is absent. Please load the " - "ACPI Processor module before starting this " - "driver.\n"); -#else printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide" " ACPI _PSS objects in a way that Linux " "understands. Please report this to the Linux " "ACPI maintainers and complain to your BIOS " "vendor.\n"); -#endif kfree(data); return -ENODEV; } diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index 8ecc75b6c7c3..6c6698feade1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -45,11 +45,10 @@ struct powernow_k8_data { * frequency is in kHz */ struct cpufreq_frequency_table *powernow_table; -#ifdef CONFIG_X86_POWERNOW_K8_ACPI /* the acpi table needs to be kept. it's only available if ACPI was * used to determine valid frequency/vid/fid states */ struct acpi_processor_performance acpi_data; -#endif + /* we need to keep track of associated cores, but let cpufreq * handle hotplug events - so just point at cpufreq pol->cpus * structure */ @@ -222,10 +221,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); -#ifdef CONFIG_X86_POWERNOW_K8_ACPI static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -#endif #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) -- cgit v1.2.3 From 9411b4ef7fcb534fe1582fe02738254e398dd931 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 4 Feb 2009 11:54:04 +0100 Subject: [CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max} The same info can be obtained via the transition_latency sysfs file Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- Documentation/cpu-freq/governors.txt | 10 ++++++++-- drivers/cpufreq/cpufreq_conservative.c | 15 +++++++++++++++ drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++++++ 3 files changed, 40 insertions(+), 2 deletions(-) diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index 5b0cfa67aff9..9b1851297d4e 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -119,8 +119,14 @@ want the kernel to look at the CPU usage and to make decisions on what to do about the frequency. Typically this is set to values of around '10000' or more. -show_sampling_rate_(min|max): the minimum and maximum sampling rates -available that you may set 'sampling_rate' to. +show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT. +You can use wider ranges now and the general +cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be +used to obtain exactly the same info: +show_sampling_rate_min = transtition_latency * 500 / 1000 +show_sampling_rate_max = transtition_latency * 500000 / 1000 +(divided by 1000 is to illustrate that sampling rate is in us and +transition latency is exported ns). up_threshold: defines what the average CPU usage between the samplings of 'sampling_rate' needs to be for the kernel to make a decision on diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index c6b3c6a02fc9..0912d7ca8cd7 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -140,11 +140,26 @@ static struct notifier_block dbs_cpufreq_notifier_block = { /************************** sysfs interface ************************/ static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) { + static int print_once; + + if (!print_once) { + printk(KERN_INFO "CPUFREQ: conservative sampling_rate_max " + "sysfs file is deprecated - used by: %s\n", + current->comm); + print_once = 1; + } return sprintf(buf, "%u\n", MAX_SAMPLING_RATE); } static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) { + static int print_once; + + if (!print_once) { + printk(KERN_INFO "CPUFREQ: conservative sampling_rate_max " + "sysfs file is deprecated - used by: %s\n", current->comm); + print_once = 1; + } return sprintf(buf, "%u\n", MIN_SAMPLING_RATE); } diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 1fa4420eb33c..32ddeaa42244 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -21,6 +21,7 @@ #include #include #include +#include /* * dbs is used in this file as a shortform for demandbased switching @@ -203,11 +204,27 @@ static void ondemand_powersave_bias_init(void) /************************** sysfs interface ************************/ static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) { + static int print_once; + + if (!print_once) { + printk(KERN_INFO "CPUFREQ: ondemand sampling_rate_max " + "sysfs file is deprecated - used by: %s\n", + current->comm); + print_once = 1; + } return sprintf(buf, "%u\n", MAX_SAMPLING_RATE); } static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) { + static int print_once; + + if (!print_once) { + printk(KERN_INFO "CPUFREQ: ondemand sampling_rate_min " + "sysfs file is deprecated - used by: %s\n", + current->comm); + print_once = 1; + } return sprintf(buf, "%u\n", MIN_SAMPLING_RATE); } -- cgit v1.2.3 From 112124ab0a9f507a0d7fdbb1e1ed2b9a24f8c4ea Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 4 Feb 2009 11:55:12 +0100 Subject: [CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions Limit sampling rate to transition_latency * 100 or kernel limits. If sampling_rate is tried to be set too low, set the lowest allowed value. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- Documentation/cpu-freq/governors.txt | 14 +++++++++++++- drivers/cpufreq/cpufreq_conservative.c | 28 ++++++++++++++++++---------- drivers/cpufreq/cpufreq_ondemand.c | 28 ++++++++++++++++++---------- 3 files changed, 49 insertions(+), 21 deletions(-) diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index 9b1851297d4e..ce73f3eb5ddb 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -117,7 +117,19 @@ accessible parameters: sampling_rate: measured in uS (10^-6 seconds), this is how often you want the kernel to look at the CPU usage and to make decisions on what to do about the frequency. Typically this is set to values of -around '10000' or more. +around '10000' or more. It's default value is (cmp. with users-guide.txt): +transition_latency * 1000 +The lowest value you can set is: +transition_latency * 100 or it may get restricted to a value where it +makes not sense for the kernel anymore to poll that often which depends +on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000). +Be aware that transition latency is in ns and sampling_rate is in us, so you +get the same sysfs value by default. +Sampling rate should always get adjusted considering the transition latency +To set the sampling rate 750 times as high as the transition latency +in the bash (as said, 1000 is default), do: +echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \ + >ondemand/sampling_rate show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT. You can use wider ranges now and the general diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 0912d7ca8cd7..8d541c69aec6 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -54,8 +54,20 @@ static unsigned int def_sampling_rate; (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10)) #define MIN_SAMPLING_RATE \ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO) +/* Above MIN_SAMPLING_RATE will vanish with its sysfs file soon + * Define the minimal settable sampling rate to the greater of: + * - "HW transition latency" * 100 (same as default sampling / 10) + * - MIN_STAT_SAMPLING_RATE + * To avoid that userspace shoots itself. +*/ +static unsigned int minimum_sampling_rate(void) +{ + return max(def_sampling_rate / 10, MIN_STAT_SAMPLING_RATE); +} + +/* This will also vanish soon with removing sampling_rate_max */ #define MAX_SAMPLING_RATE (500 * def_sampling_rate) -#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000) +#define LATENCY_MULTIPLIER (1000) #define DEF_SAMPLING_DOWN_FACTOR (1) #define MAX_SAMPLING_DOWN_FACTOR (10) #define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) @@ -208,13 +220,11 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, ret = sscanf(buf, "%u", &input); mutex_lock(&dbs_mutex); - if (ret != 1 || input > MAX_SAMPLING_RATE || - input < MIN_SAMPLING_RATE) { + if (ret != 1) { mutex_unlock(&dbs_mutex); return -EINVAL; } - - dbs_tuners_ins.sampling_rate = input; + dbs_tuners_ins.sampling_rate = max(input, minimum_sampling_rate()); mutex_unlock(&dbs_mutex); return count; @@ -540,11 +550,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if (latency == 0) latency = 1; - def_sampling_rate = 10 * latency * - DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; - - if (def_sampling_rate < MIN_STAT_SAMPLING_RATE) - def_sampling_rate = MIN_STAT_SAMPLING_RATE; + def_sampling_rate = + max(10 * latency * LATENCY_MULTIPLIER, + MIN_STAT_SAMPLING_RATE); dbs_tuners_ins.sampling_rate = def_sampling_rate; diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 32ddeaa42244..338f428a15b7 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -52,8 +52,20 @@ static unsigned int def_sampling_rate; (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10)) #define MIN_SAMPLING_RATE \ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO) +/* Above MIN_SAMPLING_RATE will vanish with its sysfs file soon + * Define the minimal settable sampling rate to the greater of: + * - "HW transition latency" * 100 (same as default sampling / 10) + * - MIN_STAT_SAMPLING_RATE + * To avoid that userspace shoots itself. +*/ +static unsigned int minimum_sampling_rate(void) +{ + return max(def_sampling_rate / 10, MIN_STAT_SAMPLING_RATE); +} + +/* This will also vanish soon with removing sampling_rate_max */ #define MAX_SAMPLING_RATE (500 * def_sampling_rate) -#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000) +#define LATENCY_MULTIPLIER (1000) #define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000) static void do_dbs_timer(struct work_struct *work); @@ -255,13 +267,11 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, ret = sscanf(buf, "%u", &input); mutex_lock(&dbs_mutex); - if (ret != 1 || input > MAX_SAMPLING_RATE - || input < MIN_SAMPLING_RATE) { + if (ret != 1) { mutex_unlock(&dbs_mutex); return -EINVAL; } - - dbs_tuners_ins.sampling_rate = input; + dbs_tuners_ins.sampling_rate = max(input, minimum_sampling_rate()); mutex_unlock(&dbs_mutex); return count; @@ -607,11 +617,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if (latency == 0) latency = 1; - def_sampling_rate = latency * - DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; - - if (def_sampling_rate < MIN_STAT_SAMPLING_RATE) - def_sampling_rate = MIN_STAT_SAMPLING_RATE; + def_sampling_rate = + max(latency * LATENCY_MULTIPLIER, + MIN_STAT_SAMPLING_RATE); dbs_tuners_ins.sampling_rate = def_sampling_rate; } -- cgit v1.2.3 From 79cc56af9fdbeaa91f50289b932d0959b41f9467 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 4 Feb 2009 11:56:11 +0100 Subject: [CPUFREQ] powernow-k8: Only print error message once, not per core. This is the typical message you get if you plug in a CPU which is newer than your BIOS. It's annoying seeing this message for each core. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index acc06b03194e..c44853fc827a 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -794,7 +794,7 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n"); + printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); return -ENODEV; } @@ -1218,6 +1218,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) struct powernow_k8_data *data; cpumask_t oldmask; int rc; + static int print_once; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1240,11 +1241,19 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { - printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide" - " ACPI _PSS objects in a way that Linux " - "understands. Please report this to the Linux " - "ACPI maintainers and complain to your BIOS " - "vendor.\n"); + /* + * Replace this one with print_once as soon as such a + * thing gets introduced + */ + if (!print_once) { + WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS " + "does not provide ACPI _PSS objects " + "in a way that Linux understands. " + "Please report this to the Linux ACPI" + " maintainers and complain to your " + "BIOS vendor.\n"); + print_once++; + } kfree(data); return -ENODEV; } -- cgit v1.2.3 From 3a58df35a64a1e0ac32c30ea629a513dec2fe711 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 17 Jan 2009 22:36:14 -0500 Subject: [CPUFREQ] checkpatch cleanups for acpi-cpufreq Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 36 +++++++++++++++--------------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 4b1c319d30c3..3babe1f1e912 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -1,5 +1,5 @@ /* - * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $) + * acpi-cpufreq.c - ACPI Processor P-States Driver * * Copyright (C) 2001, 2002 Andy Grover * Copyright (C) 2001, 2002 Paul Diefenbaugh @@ -36,16 +36,18 @@ #include #include +#include +#include +#include + #include -#include #include #include #include -#include -#include -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "acpi-cpufreq", msg) MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); @@ -95,7 +97,7 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) perf = data->acpi_data; - for (i=0; istate_count; i++) { + for (i = 0; i < perf->state_count; i++) { if (value == perf->states[i].status) return data->freq_table[i].frequency; } @@ -110,7 +112,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) msr &= INTEL_MSR_RANGE; perf = data->acpi_data; - for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { + for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { if (msr == perf->states[data->freq_table[i].index].status) return data->freq_table[i].frequency; } @@ -138,15 +140,13 @@ struct io_addr { u8 bit_width; }; -typedef union { - struct msr_addr msr; - struct io_addr io; -} drv_addr_union; - struct drv_cmd { unsigned int type; const struct cpumask *mask; - drv_addr_union addr; + union { + struct msr_addr msr; + struct io_addr io; + } addr; u32 val; }; @@ -369,7 +369,7 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, unsigned int cur_freq; unsigned int i; - for (i=0; i<100; i++) { + for (i = 0; i < 100; i++) { cur_freq = extract_freq(get_cur_val(mask), data); if (cur_freq == freq) return 1; @@ -494,7 +494,7 @@ acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) unsigned long freq; unsigned long freqn = perf->states[0].core_frequency * 1000; - for (i=0; i<(perf->state_count-1); i++) { + for (i = 0; i < (perf->state_count-1); i++) { freq = freqn; freqn = perf->states[i+1].core_frequency * 1000; if ((2 * cpu_khz) > (freqn + freq)) { @@ -673,7 +673,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) /* detect transition latency */ policy->cpuinfo.transition_latency = 0; - for (i=0; istate_count; i++) { + for (i = 0; i < perf->state_count; i++) { if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency) policy->cpuinfo.transition_latency = @@ -682,8 +682,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->max_freq = perf->states[0].core_frequency * 1000; /* table init */ - for (i=0; istate_count; i++) { - if (i>0 && perf->states[i].core_frequency >= + for (i = 0; i < perf->state_count; i++) { + if (i > 0 && perf->states[i].core_frequency >= data->freq_table[valid_states-1].frequency / 1000) continue; -- cgit v1.2.3 From 91420220d278584693d11a800b78fdc20e8fe10e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 4 Feb 2009 15:28:54 -0500 Subject: [CPUFREQ] Use swap() in longhaul.c Remove hand-coded implementation of swap() Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/longhaul.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index dc03622a83a0..f1c51aea064d 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -511,13 +511,10 @@ static int __init longhaul_get_ranges(void) } } if (min_i != j) { - unsigned int temp; - temp = longhaul_table[j].frequency; - longhaul_table[j].frequency = longhaul_table[min_i].frequency; - longhaul_table[min_i].frequency = temp; - temp = longhaul_table[j].index; - longhaul_table[j].index = longhaul_table[min_i].index; - longhaul_table[min_i].index = temp; + swap(longhaul_table[j].frequency, + longhaul_table[min_i].frequency); + swap(longhaul_table[j].index, + longhaul_table[min_i].index); } } -- cgit v1.2.3 From 11a80a9c7668c40c40a03ae15bd2c6b215058b2e Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 13 Feb 2009 19:01:01 +0000 Subject: [CPUFREQ] conservative: amend author's email address Amend author's email address. Signed-off-by: Alexander Clouter Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 8d541c69aec6..a18cfbf021b3 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -4,7 +4,7 @@ * Copyright (C) 2001 Russell King * (C) 2003 Venkatesh Pallipadi . * Jun Nakajima - * (C) 2004 Alexander Clouter + * (C) 2009 Alexander Clouter * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -625,7 +625,7 @@ static void __exit cpufreq_gov_dbs_exit(void) } -MODULE_AUTHOR("Alexander Clouter "); +MODULE_AUTHOR("Alexander Clouter "); MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for " "Low Latency Frequency Transition capable processors " "optimised for use in a battery environment"); -- cgit v1.2.3 From f407a08bb7eff5ddbe0d9173d8717794a910771f Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 13 Feb 2009 19:01:51 +0000 Subject: [CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked When someone added the dbs_cpufreq_notifier section to the governor the code ended up causing the frequency to only fall. This is because requested_freq is tinkered with and that should only modified if it has an invlaid value due to changes in the available frequency ranges This should fix #10055. Signed-off-by: Alexander Clouter Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index a18cfbf021b3..a16a5b8c1dc5 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -137,10 +137,21 @@ dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val, struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cpu_dbs_info, freq->cpu); + struct cpufreq_policy *policy; + if (!this_dbs_info->enable) return 0; - this_dbs_info->requested_freq = freq->new; + policy = this_dbs_info->cur_policy; + + /* + * we only care if our internally tracked freq moves outside + * the 'valid' ranges of freqency available to us otherwise + * we do not change it + */ + if (this_dbs_info->requested_freq > policy->max + || this_dbs_info->requested_freq < policy->min) + this_dbs_info->requested_freq = freq->new; return 0; } -- cgit v1.2.3 From 8e677ce83bf41ba9c74e5b6d9ee60b07d4e5ed93 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 13 Feb 2009 19:02:34 +0000 Subject: [CPUFREQ] conservative: fixup governor to function more like ondemand logic As conservative is based off ondemand the codebases occasionally need to be resync'd. This patch, although ugly, does this. Signed-off-by: Alexander Clouter Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 328 +++++++++++++++++++-------------- 1 file changed, 188 insertions(+), 140 deletions(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index a16a5b8c1dc5..c9bd0c55ad1e 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -13,22 +13,17 @@ #include #include -#include #include -#include -#include #include -#include -#include -#include -#include #include -#include -#include #include #include -#include #include +#include +#include +#include +#include + /* * dbs is used in this file as a shortform for demandbased switching * It helps to keep variable names smaller, simpler @@ -43,14 +38,14 @@ * latency of the processor. The governor will work on any processor with * transition latency <= 10mS, using appropriate sampling * rate. - * For CPUs with transition latency > 10mS (mostly drivers - * with CPUFREQ_ETERNAL), this governor will not work. + * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL) + * this governor will not work. * All times here are in uS. */ static unsigned int def_sampling_rate; #define MIN_SAMPLING_RATE_RATIO (2) /* for correct statistics, we need at least 10 ticks between each measure */ -#define MIN_STAT_SAMPLING_RATE \ +#define MIN_STAT_SAMPLING_RATE \ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10)) #define MIN_SAMPLING_RATE \ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO) @@ -75,12 +70,15 @@ static unsigned int minimum_sampling_rate(void) static void do_dbs_timer(struct work_struct *work); struct cpu_dbs_info_s { + cputime64_t prev_cpu_idle; + cputime64_t prev_cpu_wall; + cputime64_t prev_cpu_nice; struct cpufreq_policy *cur_policy; - unsigned int prev_cpu_idle_up; - unsigned int prev_cpu_idle_down; - unsigned int enable; + struct delayed_work work; unsigned int down_skip; unsigned int requested_freq; + int cpu; + unsigned int enable:1; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); @@ -95,18 +93,17 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * is recursive for the same process. -Venki */ static DEFINE_MUTEX(dbs_mutex); -static DECLARE_DELAYED_WORK(dbs_work, do_dbs_timer); -struct dbs_tuners { +static struct workqueue_struct *kconservative_wq; + +static struct dbs_tuners { unsigned int sampling_rate; unsigned int sampling_down_factor; unsigned int up_threshold; unsigned int down_threshold; unsigned int ignore_nice; unsigned int freq_step; -}; - -static struct dbs_tuners dbs_tuners_ins = { +} dbs_tuners_ins = { .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD, .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, @@ -114,18 +111,37 @@ static struct dbs_tuners dbs_tuners_ins = { .freq_step = 5, }; -static inline unsigned int get_cpu_idle_time(unsigned int cpu) +static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, + cputime64_t *wall) { - unsigned int add_nice = 0, ret; + cputime64_t idle_time; + cputime64_t cur_wall_time; + cputime64_t busy_time; + + cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); + busy_time = cputime64_add(kstat_cpu(cpu).cpustat.user, + kstat_cpu(cpu).cpustat.system); - if (dbs_tuners_ins.ignore_nice) - add_nice = kstat_cpu(cpu).cpustat.nice; + busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.irq); + busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.softirq); + busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.steal); + busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.nice); - ret = kstat_cpu(cpu).cpustat.idle + - kstat_cpu(cpu).cpustat.iowait + - add_nice; + idle_time = cputime64_sub(cur_wall_time, busy_time); + if (wall) + *wall = cur_wall_time; - return ret; + return idle_time; +} + +static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) +{ + u64 idle_time = get_cpu_idle_time_us(cpu, wall); + + if (idle_time == -1ULL) + return get_cpu_idle_time_jiffy(cpu, wall); + + return idle_time; } /* keep track of frequency transitions */ @@ -186,8 +202,8 @@ static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) return sprintf(buf, "%u\n", MIN_SAMPLING_RATE); } -#define define_one_ro(_name) \ -static struct freq_attr _name = \ +#define define_one_ro(_name) \ +static struct freq_attr _name = \ __ATTR(_name, 0444, show_##_name, NULL) define_one_ro(sampling_rate_max); @@ -213,6 +229,7 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, unsigned int input; int ret; ret = sscanf(buf, "%u", &input); + if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) return -EINVAL; @@ -230,11 +247,10 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, int ret; ret = sscanf(buf, "%u", &input); - mutex_lock(&dbs_mutex); - if (ret != 1) { - mutex_unlock(&dbs_mutex); + if (ret != 1) return -EINVAL; - } + + mutex_lock(&dbs_mutex); dbs_tuners_ins.sampling_rate = max(input, minimum_sampling_rate()); mutex_unlock(&dbs_mutex); @@ -250,7 +266,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, mutex_lock(&dbs_mutex); if (ret != 1 || input > 100 || - input <= dbs_tuners_ins.down_threshold) { + input <= dbs_tuners_ins.down_threshold) { mutex_unlock(&dbs_mutex); return -EINVAL; } @@ -269,7 +285,9 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused, ret = sscanf(buf, "%u", &input); mutex_lock(&dbs_mutex); - if (ret != 1 || input > 100 || input >= dbs_tuners_ins.up_threshold) { + /* cannot be lower than 11 otherwise freq will not fall */ + if (ret != 1 || input < 11 || input > 100 || + input >= dbs_tuners_ins.up_threshold) { mutex_unlock(&dbs_mutex); return -EINVAL; } @@ -302,12 +320,14 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, } dbs_tuners_ins.ignore_nice = input; - /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */ + /* we need to re-evaluate prev_cpu_idle */ for_each_online_cpu(j) { - struct cpu_dbs_info_s *j_dbs_info; - j_dbs_info = &per_cpu(cpu_dbs_info, j); - j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); - j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; + struct cpu_dbs_info_s *dbs_info; + dbs_info = &per_cpu(cpu_dbs_info, j); + dbs_info->prev_cpu_idle = get_cpu_idle_time(j, + &dbs_info->prev_cpu_wall); + if (dbs_tuners_ins.ignore_nice) + dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice; } mutex_unlock(&dbs_mutex); @@ -319,7 +339,6 @@ static ssize_t store_freq_step(struct cpufreq_policy *policy, { unsigned int input; int ret; - ret = sscanf(buf, "%u", &input); if (ret != 1) @@ -367,55 +386,78 @@ static struct attribute_group dbs_attr_group = { /************************** sysfs end ************************/ -static void dbs_check_cpu(int cpu) +static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) { - unsigned int idle_ticks, up_idle_ticks, down_idle_ticks; - unsigned int tmp_idle_ticks, total_idle_ticks; + unsigned int load = 0; unsigned int freq_target; - unsigned int freq_down_sampling_rate; - struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cpu_dbs_info, cpu); - struct cpufreq_policy *policy; - if (!this_dbs_info->enable) - return; + struct cpufreq_policy *policy; + unsigned int j; policy = this_dbs_info->cur_policy; /* - * The default safe range is 20% to 80% - * Every sampling_rate, we check - * - If current idle time is less than 20%, then we try to - * increase frequency - * Every sampling_rate*sampling_down_factor, we check - * - If current idle time is more than 80%, then we try to - * decrease frequency + * Every sampling_rate, we check, if current idle time is less + * than 20% (default), then we try to increase frequency + * Every sampling_rate*sampling_down_factor, we check, if current + * idle time is more than 80%, then we try to decrease frequency * * Any frequency increase takes it to the maximum frequency. * Frequency reduction happens at minimum steps of - * 5% (default) of max_frequency + * 5% (default) of maximum frequency */ - /* Check for frequency increase */ - idle_ticks = UINT_MAX; + /* Get Absolute Load */ + for_each_cpu(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + cputime64_t cur_wall_time, cur_idle_time; + unsigned int idle_time, wall_time; - /* Check for frequency increase */ - total_idle_ticks = get_cpu_idle_time(cpu); - tmp_idle_ticks = total_idle_ticks - - this_dbs_info->prev_cpu_idle_up; - this_dbs_info->prev_cpu_idle_up = total_idle_ticks; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + + cur_idle_time = get_cpu_idle_time(j, &cur_wall_time); + + wall_time = (unsigned int) cputime64_sub(cur_wall_time, + j_dbs_info->prev_cpu_wall); + j_dbs_info->prev_cpu_wall = cur_wall_time; - if (tmp_idle_ticks < idle_ticks) - idle_ticks = tmp_idle_ticks; + idle_time = (unsigned int) cputime64_sub(cur_idle_time, + j_dbs_info->prev_cpu_idle); + j_dbs_info->prev_cpu_idle = cur_idle_time; - /* Scale idle ticks by 100 and compare with up and down ticks */ - idle_ticks *= 100; - up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) * - usecs_to_jiffies(dbs_tuners_ins.sampling_rate); + if (dbs_tuners_ins.ignore_nice) { + cputime64_t cur_nice; + unsigned long cur_nice_jiffies; + + cur_nice = cputime64_sub(kstat_cpu(j).cpustat.nice, + j_dbs_info->prev_cpu_nice); + /* + * Assumption: nice time between sampling periods will + * be less than 2^32 jiffies for 32 bit sys + */ + cur_nice_jiffies = (unsigned long) + cputime64_to_jiffies64(cur_nice); + + j_dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice; + idle_time += jiffies_to_usecs(cur_nice_jiffies); + } + + if (unlikely(!wall_time || wall_time < idle_time)) + continue; + + load = 100 * (wall_time - idle_time) / wall_time; + } + + /* + * break out if we 'cannot' reduce the speed as the user might + * want freq_step to be zero + */ + if (dbs_tuners_ins.freq_step == 0) + return; - if (idle_ticks < up_idle_ticks) { + /* Check for frequency increase */ + if (load > dbs_tuners_ins.up_threshold) { this_dbs_info->down_skip = 0; - this_dbs_info->prev_cpu_idle_down = - this_dbs_info->prev_cpu_idle_up; /* if we are already at full speed then break out early */ if (this_dbs_info->requested_freq == policy->max) @@ -436,49 +478,24 @@ static void dbs_check_cpu(int cpu) return; } - /* Check for frequency decrease */ - this_dbs_info->down_skip++; - if (this_dbs_info->down_skip < dbs_tuners_ins.sampling_down_factor) - return; - - /* Check for frequency decrease */ - total_idle_ticks = this_dbs_info->prev_cpu_idle_up; - tmp_idle_ticks = total_idle_ticks - - this_dbs_info->prev_cpu_idle_down; - this_dbs_info->prev_cpu_idle_down = total_idle_ticks; - - if (tmp_idle_ticks < idle_ticks) - idle_ticks = tmp_idle_ticks; - - /* Scale idle ticks by 100 and compare with up and down ticks */ - idle_ticks *= 100; - this_dbs_info->down_skip = 0; - - freq_down_sampling_rate = dbs_tuners_ins.sampling_rate * - dbs_tuners_ins.sampling_down_factor; - down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) * - usecs_to_jiffies(freq_down_sampling_rate); - - if (idle_ticks > down_idle_ticks) { - /* - * if we are already at the lowest speed then break out early - * or if we 'cannot' reduce the speed as the user might want - * freq_target to be zero - */ - if (this_dbs_info->requested_freq == policy->min - || dbs_tuners_ins.freq_step == 0) - return; - + /* + * The optimal frequency is the frequency that is the lowest that + * can support the current CPU usage without triggering the up + * policy. To be safe, we focus 10 points under the threshold. + */ + if (load < (dbs_tuners_ins.down_threshold - 10)) { freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100; - /* max freq cannot be less than 100. But who knows.... */ - if (unlikely(freq_target == 0)) - freq_target = 5; - this_dbs_info->requested_freq -= freq_target; if (this_dbs_info->requested_freq < policy->min) this_dbs_info->requested_freq = policy->min; + /* + * if we cannot reduce the frequency anymore, break out early + */ + if (policy->cur == policy->min) + return; + __cpufreq_driver_target(policy, this_dbs_info->requested_freq, CPUFREQ_RELATION_H); return; @@ -487,27 +504,45 @@ static void dbs_check_cpu(int cpu) static void do_dbs_timer(struct work_struct *work) { - int i; - mutex_lock(&dbs_mutex); - for_each_online_cpu(i) - dbs_check_cpu(i); - schedule_delayed_work(&dbs_work, - usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); - mutex_unlock(&dbs_mutex); + struct cpu_dbs_info_s *dbs_info = + container_of(work, struct cpu_dbs_info_s, work.work); + unsigned int cpu = dbs_info->cpu; + + /* We want all CPUs to do sampling nearly on same jiffy */ + int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); + + delay -= jiffies % delay; + + if (lock_policy_rwsem_write(cpu) < 0) + return; + + if (!dbs_info->enable) { + unlock_policy_rwsem_write(cpu); + return; + } + + dbs_check_cpu(dbs_info); + + queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay); + unlock_policy_rwsem_write(cpu); } -static inline void dbs_timer_init(void) +static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) { - init_timer_deferrable(&dbs_work.timer); - schedule_delayed_work(&dbs_work, - usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); - return; + /* We want all CPUs to do sampling nearly on same jiffy */ + int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); + delay -= jiffies % delay; + + dbs_info->enable = 1; + INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); + queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work, + delay); } -static inline void dbs_timer_exit(void) +static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - cancel_delayed_work(&dbs_work); - return; + dbs_info->enable = 0; + cancel_delayed_work(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, @@ -541,11 +576,13 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info = &per_cpu(cpu_dbs_info, j); j_dbs_info->cur_policy = policy; - j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(cpu); - j_dbs_info->prev_cpu_idle_down - = j_dbs_info->prev_cpu_idle_up; + j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j, + &j_dbs_info->prev_cpu_wall); + if (dbs_tuners_ins.ignore_nice) { + j_dbs_info->prev_cpu_nice = + kstat_cpu(j).cpustat.nice; + } } - this_dbs_info->enable = 1; this_dbs_info->down_skip = 0; this_dbs_info->requested_freq = policy->cur; @@ -567,30 +604,30 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, dbs_tuners_ins.sampling_rate = def_sampling_rate; - dbs_timer_init(); cpufreq_register_notifier( &dbs_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); } + dbs_timer_init(this_dbs_info); mutex_unlock(&dbs_mutex); + break; case CPUFREQ_GOV_STOP: mutex_lock(&dbs_mutex); - this_dbs_info->enable = 0; + dbs_timer_exit(this_dbs_info); sysfs_remove_group(&policy->kobj, &dbs_attr_group); dbs_enable--; + /* * Stop the timerschedule work, when this governor * is used for first time */ - if (dbs_enable == 0) { - dbs_timer_exit(); + if (dbs_enable == 0) cpufreq_unregister_notifier( &dbs_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); - } mutex_unlock(&dbs_mutex); @@ -607,6 +644,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); mutex_unlock(&dbs_mutex); + break; } return 0; @@ -624,15 +662,25 @@ struct cpufreq_governor cpufreq_gov_conservative = { static int __init cpufreq_gov_dbs_init(void) { - return cpufreq_register_governor(&cpufreq_gov_conservative); + int err; + + kconservative_wq = create_workqueue("kconservative"); + if (!kconservative_wq) { + printk(KERN_ERR "Creation of kconservative failed\n"); + return -EFAULT; + } + + err = cpufreq_register_governor(&cpufreq_gov_conservative); + if (err) + destroy_workqueue(kconservative_wq); + + return err; } static void __exit cpufreq_gov_dbs_exit(void) { - /* Make sure that the scheduled work is indeed not running */ - flush_scheduled_work(); - cpufreq_unregister_governor(&cpufreq_gov_conservative); + destroy_workqueue(kconservative_wq); } -- cgit v1.2.3 From a75603a084f1dd9a9558c8af95fc2acfc54f1021 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Fri, 13 Feb 2009 19:03:26 +0000 Subject: [CPUFREQ] conservative: remove 10x from def_sampling_rate AMD users get particular hit by this issue (bug 8081) as it caps at typically 90 seconds as the minimum period for a frequency change. Harsh eh? Years ago I borked this buy puting the 10x in the wrong place...I fix that by removing it altogether. Signed-off-by: Alexander Clouter Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index c9bd0c55ad1e..2ecd95e4ab1a 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -599,7 +599,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, latency = 1; def_sampling_rate = - max(10 * latency * LATENCY_MULTIPLIER, + max(latency * LATENCY_MULTIPLIER, MIN_STAT_SAMPLING_RATE); dbs_tuners_ins.sampling_rate = def_sampling_rate; -- cgit v1.2.3 From de3ed81d746d7cfc22a0c645244ed9fa71e4a833 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 18 Feb 2009 18:28:22 +0000 Subject: [CPUFREQ] Change link order of x86 cpufreq modules Change the link order of the cpufreq modules to ensure that they're probed in the preferred order when statically linked in. Signed-off-by: Matthew Garrett Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile index 560f7760dae5..509296df294d 100644 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ b/arch/x86/kernel/cpu/cpufreq/Makefile @@ -1,6 +1,11 @@ +# Link order matters. K8 is preferred to ACPI because of firmware bugs in early +# K8 systems. ACPI is preferred to all other hardware-specific drivers. +# speedstep-* is preferred over p4-clockmod. + +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o @@ -10,7 +15,6 @@ obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o -- cgit v1.2.3 From 0cb8bc256093e716d2a0a4a721f36c625a3f7634 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 18 Feb 2009 14:11:00 -0500 Subject: [CPUFREQ] powernow-k8: Use a common exit path. a0abd520fd69295f4a3735e29a9448a32e101d47 introduced a slew of extra kfree/return -ENODEV pairs. This replaces them all with gotos. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index c44853fc827a..a15ac94e0b9b 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1254,21 +1254,18 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) "BIOS vendor.\n"); print_once++; } - kfree(data); - return -ENODEV; + goto err_out; } if (pol->cpu != 0) { printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " "CPU other than CPU0. Complain to your BIOS " "vendor.\n"); - kfree(data); - return -ENODEV; + goto err_out; } rc = find_psb_table(data); - if (rc) { - kfree(data); - return -ENODEV; - } + if (rc) + goto err_out; + /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ pol->cpuinfo.transition_latency = ( @@ -1283,16 +1280,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (smp_processor_id() != pol->cpu) { printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; + goto err_out_unmask; } if (pending_bit_stuck()) { printk(KERN_ERR PFX "failing init, change pending bit set\n"); - goto err_out; + goto err_out_unmask; } if (query_current_values_with_pending_wait(data)) - goto err_out; + goto err_out_unmask; if (cpu_family == CPU_OPTERON) fidvid_msr_init(); @@ -1335,10 +1332,11 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) return 0; -err_out: +err_out_unmask: set_cpus_allowed_ptr(current, &oldmask); powernow_k8_cpu_exit_acpi(data); +err_out: kfree(data); return -ENODEV; } -- cgit v1.2.3 From 199785eac892a1fa1b71cc22bec58e8b156d9311 Mon Sep 17 00:00:00 2001 From: Matthias-Christian Ott Date: Fri, 20 Feb 2009 20:52:17 -0500 Subject: [CPUFREQ] p4-clockmod reports wrong frequency. http://bugzilla.kernel.org/show_bug.cgi?id=10968 [ Updated for current tree, and fixed compile failure when p4-clockmod was built modular -- davej] From: Matthias-Christian Ott Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones --- arch/x86/include/asm/timer.h | 2 +- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 7 ++++++ arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 34 +++++++++++++++++------------ arch/x86/kernel/tsc.c | 3 --- 4 files changed, 28 insertions(+), 18 deletions(-) diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index 2bb6a835c453..4f5c24724856 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -11,8 +11,8 @@ unsigned long native_calibrate_tsc(void); #ifdef CONFIG_X86_32 extern int timer_ack; +#endif extern int recalibrate_cpu_khz(void); -#endif /* CONFIG_X86_32 */ extern int no_timer_check; diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 46a2a7a53148..1778402305e0 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -31,6 +31,7 @@ #include #include +#include #include "speedstep-lib.h" @@ -224,6 +225,12 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) dprintk("has errata -- disabling low frequencies\n"); } + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && + c->x86_model < 2) { + /* switch to maximum frequency and measure result */ + cpufreq_p4_setdc(policy->cpu, DC_DISABLE); + recalibrate_cpu_khz(); + } /* get max frequency */ stock_freq = cpufreq_p4_get_frequency(c); if (!stock_freq) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index 55c696daa05c..2e3c6862657b 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -16,6 +16,7 @@ #include #include +#include #include "speedstep-lib.h" #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ @@ -178,6 +179,15 @@ static unsigned int pentium4_get_frequency(void) u32 msr_lo, msr_hi, mult; unsigned int fsb = 0; unsigned int ret; + u8 fsb_code; + + /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency + * to System Bus Frequency Ratio Field in the Processor Frequency + * Configuration Register of the MSR. Therefore the current + * frequency cannot be calculated and has to be measured. + */ + if (c->x86_model < 2) + return cpu_khz; rdmsr(0x2c, msr_lo, msr_hi); @@ -188,21 +198,17 @@ static unsigned int pentium4_get_frequency(void) * revision #12 in Table B-1: MSRs in the Pentium 4 and * Intel Xeon Processors, on page B-4 and B-5. */ - if (c->x86_model < 2) + fsb_code = (msr_lo >> 16) & 0x7; + switch (fsb_code) { + case 0: fsb = 100 * 1000; - else { - u8 fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } + break; + case 1: + fsb = 13333 * 10; + break; + case 2: + fsb = 200 * 1000; + break; } if (!fsb) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 599e58168631..5ad22f8f5f3a 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -523,8 +523,6 @@ unsigned long native_calibrate_tsc(void) return tsc_pit_min; } -#ifdef CONFIG_X86_32 -/* Only called from the Powernow K7 cpu freq driver */ int recalibrate_cpu_khz(void) { #ifndef CONFIG_SMP @@ -546,7 +544,6 @@ int recalibrate_cpu_khz(void) EXPORT_SYMBOL(recalibrate_cpu_khz); -#endif /* CONFIG_X86_32 */ /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) -- cgit v1.2.3 From eb3092cee79e4efa5d3e9c81c7e6ca90318cebb8 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Sat, 21 Feb 2009 01:58:47 +0000 Subject: [CPUFREQ] Make cpufreq-nforce2 less obnoxious Not owning an nforce2 is a sign of good taste, not an error. Signed-off-by: Matthew Garrett Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index 99262906838c..733093d60436 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -424,7 +424,7 @@ static int __init nforce2_init(void) /* detect chipset */ if (nforce2_detect_chipset()) { - printk(KERN_ERR PFX "No nForce2 chipset.\n"); + printk(KERN_INFO PFX "No nForce2 chipset.\n"); return -ENODEV; } -- cgit v1.2.3 From 873dc78a8676b7ba6260b1d74c50d8ea5025ecbe Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Feb 2009 18:12:13 +0100 Subject: ALSA: hda - Clean up / fix quirks for HP laptops with AD1984A Use SND_PCI_QUIRK_MASK() to clean up / support better HP laptops with AD1984A codec. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 0253cb93aa7f..5bb48ee8b6c6 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3923,9 +3923,8 @@ static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE), - SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP), - SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP), - SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), + SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD), {} }; -- cgit v1.2.3 From f872a9194cb006994d47a58efc875218594e6072 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 Feb 2009 00:57:01 +0100 Subject: ALSA: hda - Clean up / fix quirk for Sony laptops with ALC262 Clean up / fix quirk entries for Sony laptops with ALC262 codec using NSD_PCI_QUIRK_MASK(). This also fixes the kernel bug #12780 http://bugme.linux-foundation.org/show_bug.cgi?id=12780 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 50ae8f33af5f..d670d33cfa17 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10824,10 +10824,8 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x1f00, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x8203, "Sony UX-90", ALC262_HIPPO), SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), - SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD), - SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD), - SND_PCI_QUIRK(0x104d, 0x9033, "Sony VAIO VGN-SR19XN", - ALC262_SONY_ASSAMD), + SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", + ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", ALC262_TOSHIBA_RX1), SND_PCI_QUIRK(0x1179, 0xff7b, "Toshiba S06", ALC262_TOSHIBA_S06), -- cgit v1.2.3 From 930738de602d2ceb0d1c1b368fe2a8d2a974ab72 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 26 Feb 2009 09:27:20 +0100 Subject: sound: virtuoso: add Xonar Essence STX support Add support for the Asus Xonar Essence STX sound card. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- sound/pci/Kconfig | 3 +- sound/pci/oxygen/virtuoso.c | 192 ++++++++++++++++++++++++ 3 files changed, 195 insertions(+), 2 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 841a9365d5fd..1356d2a6772b 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1824,7 +1824,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ------------------- Module for sound cards based on the Asus AV100/AV200 chips, - i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe). + i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX. This module supports autoprobe and multiple cards. diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 82b9bddcdcd6..21d117ada84b 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -744,7 +744,8 @@ config SND_VIRTUOSO select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X. + Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, and + Essence STX. Support for the HDAV1.3 (Deluxe) is very experimental. To compile this driver as a module, choose M here: the module diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 00dc97806f1b..bc5ce11c8b14 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -112,6 +112,34 @@ * CS4362A: AD0 <- 0 */ +/* + * Xonar Essence STX + * ----------------- + * + * CMI8788: + * + * I²C <-> PCM1792A + * + * GPI 0 <- external power present + * + * GPIO 0 -> enable output to speakers + * GPIO 1 -> route HP to front panel (0) or rear jack (1) + * GPIO 2 -> M0 of CS5381 + * GPIO 3 -> M1 of CS5381 + * GPIO 7 -> route output to speaker jacks (0) or HP (1) + * GPIO 8 -> route input jack to line-in (0) or mic-in (1) + * + * PCM1792A: + * + * AD0 <- 0 + * + * H6 daughterboard + * ---------------- + * + * GPIO 4 <- 0 + * GPIO 5 <- 0 + */ + #include #include #include @@ -152,6 +180,7 @@ enum { MODEL_DX, MODEL_HDAV, /* without daughterboard */ MODEL_HDAV_H6, /* with H6 daughterboard */ + MODEL_STX, }; static struct pci_device_id xonar_ids[] __devinitdata = { @@ -160,6 +189,7 @@ static struct pci_device_id xonar_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X }, { OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV }, { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 }, + { OXYGEN_PCI_SUBID(0x1043, 0x835c), .driver_data = MODEL_STX }, { OXYGEN_PCI_SUBID_BROKEN_EEPROM }, { } }; @@ -184,6 +214,9 @@ MODULE_DEVICE_TABLE(pci, xonar_ids); #define GPIO_HDAV_DB_H6 0x0000 #define GPIO_HDAV_DB_XX 0x0020 +#define GPIO_ST_HP_REAR 0x0002 +#define GPIO_ST_HP 0x0080 + #define I2C_DEVICE_PCM1796(i) (0x98 + ((i) << 1)) /* 10011, ADx=i, /W=0 */ #define I2C_DEVICE_CS4398 0x9e /* 10011, AD1=1, AD0=1, /W=0 */ #define I2C_DEVICE_CS4362A 0x30 /* 001100, AD0=0, /W=0 */ @@ -497,6 +530,36 @@ static void xonar_hdav_init(struct oxygen *chip) snd_component_add(chip->card, "CS5381"); } +static void xonar_stx_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, + OXYGEN_2WIRE_LENGTH_8 | + OXYGEN_2WIRE_INTERRUPT_MASK | + OXYGEN_2WIRE_SPEED_FAST); + + data->anti_pop_delay = 100; + data->dacs = 1; + data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; + data->ext_power_reg = OXYGEN_GPI_DATA; + data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; + data->ext_power_bit = GPI_DX_EXT_POWER; + data->pcm1796_oversampling = PCM1796_OS_64; + + pcm1796_init(chip); + + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, + GPIO_DX_INPUT_ROUTE | GPIO_ST_HP_REAR | GPIO_ST_HP); + oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, + GPIO_DX_INPUT_ROUTE | GPIO_ST_HP_REAR | GPIO_ST_HP); + + xonar_common_init(chip); + + snd_component_add(chip->card, "PCM1792A"); + snd_component_add(chip->card, "CS5381"); +} + static void xonar_disable_output(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -524,6 +587,11 @@ static void xonar_hdav_cleanup(struct oxygen *chip) xonar_disable_output(chip); } +static void xonar_st_cleanup(struct oxygen *chip) +{ + xonar_disable_output(chip); +} + static void xonar_d2_suspend(struct oxygen *chip) { xonar_d2_cleanup(chip); @@ -540,6 +608,11 @@ static void xonar_hdav_suspend(struct oxygen *chip) msleep(2); } +static void xonar_st_suspend(struct oxygen *chip) +{ + xonar_st_cleanup(chip); +} + static void xonar_d2_resume(struct oxygen *chip) { pcm1796_init(chip); @@ -567,6 +640,12 @@ static void xonar_hdav_resume(struct oxygen *chip) xonar_enable_output(chip); } +static void xonar_st_resume(struct oxygen *chip) +{ + pcm1796_init(chip); + xonar_enable_output(chip); +} + static void xonar_hdav_pcm_hardware_filter(unsigned int channel, struct snd_pcm_hardware *hardware) { @@ -746,6 +825,72 @@ static const struct snd_kcontrol_new front_panel_switch = { .private_value = GPIO_DX_FRONT_PANEL, }; +static int st_output_switch_info(struct snd_kcontrol *ctl, + struct snd_ctl_elem_info *info) +{ + static const char *const names[3] = { + "Speakers", "Headphones", "FP Headphones" + }; + + info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + info->count = 1; + info->value.enumerated.items = 3; + if (info->value.enumerated.item >= 3) + info->value.enumerated.item = 2; + strcpy(info->value.enumerated.name, names[info->value.enumerated.item]); + return 0; +} + +static int st_output_switch_get(struct snd_kcontrol *ctl, + struct snd_ctl_elem_value *value) +{ + struct oxygen *chip = ctl->private_data; + u16 gpio; + + gpio = oxygen_read16(chip, OXYGEN_GPIO_DATA); + if (!(gpio & GPIO_ST_HP)) + value->value.enumerated.item[0] = 0; + else if (gpio & GPIO_ST_HP_REAR) + value->value.enumerated.item[0] = 1; + else + value->value.enumerated.item[0] = 2; + return 0; +} + + +static int st_output_switch_put(struct snd_kcontrol *ctl, + struct snd_ctl_elem_value *value) +{ + struct oxygen *chip = ctl->private_data; + u16 gpio_old, gpio; + + mutex_lock(&chip->mutex); + gpio_old = oxygen_read16(chip, OXYGEN_GPIO_DATA); + gpio = gpio_old; + switch (value->value.enumerated.item[0]) { + case 0: + gpio &= ~(GPIO_ST_HP | GPIO_ST_HP_REAR); + break; + case 1: + gpio |= GPIO_ST_HP | GPIO_ST_HP_REAR; + break; + case 2: + gpio = (gpio | GPIO_ST_HP) & ~GPIO_ST_HP_REAR; + break; + } + oxygen_write16(chip, OXYGEN_GPIO_DATA, gpio); + mutex_unlock(&chip->mutex); + return gpio != gpio_old; +} + +static const struct snd_kcontrol_new st_output_switch = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Output", + .info = st_output_switch_info, + .get = st_output_switch_get, + .put = st_output_switch_put, +}; + static void xonar_line_mic_ac97_switch(struct oxygen *chip, unsigned int reg, unsigned int mute) { @@ -776,6 +921,15 @@ static int xonar_d1_control_filter(struct snd_kcontrol_new *template) return 0; } +static int xonar_st_control_filter(struct snd_kcontrol_new *template) +{ + if (!strncmp(template->name, "CD Capture ", 11)) + return 1; /* no CD input */ + if (!strcmp(template->name, "Stereo Upmixing")) + return 1; /* stereo only - we don't need upmixing */ + return 0; +} + static int xonar_d2_mixer_init(struct oxygen *chip) { return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip)); @@ -786,6 +940,11 @@ static int xonar_d1_mixer_init(struct oxygen *chip) return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip)); } +static int xonar_st_mixer_init(struct oxygen *chip) +{ + return snd_ctl_add(chip->card, snd_ctl_new1(&st_output_switch, chip)); +} + static const struct oxygen_model model_xonar_d2 = { .longname = "Asus Virtuoso 200", .chip = "AV200", @@ -872,6 +1031,33 @@ static const struct oxygen_model model_xonar_hdav = { .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }; +static const struct oxygen_model model_xonar_st = { + .longname = "Asus Virtuoso 100", + .chip = "AV200", + .init = xonar_stx_init, + .control_filter = xonar_st_control_filter, + .mixer_init = xonar_st_mixer_init, + .cleanup = xonar_st_cleanup, + .suspend = xonar_st_suspend, + .resume = xonar_st_resume, + .set_dac_params = set_pcm1796_params, + .set_adc_params = set_cs53x1_params, + .update_dac_volume = update_pcm1796_volume, + .update_dac_mute = update_pcm1796_mute, + .ac97_switch = xonar_line_mic_ac97_switch, + .dac_tlv = pcm1796_db_scale, + .model_data_size = sizeof(struct xonar_data), + .device_config = PLAYBACK_0_TO_I2S | + PLAYBACK_1_TO_SPDIF | + CAPTURE_0_FROM_I2S_2, + .dac_channels = 2, + .dac_volume_min = 255 - 2*60, + .dac_volume_max = 255, + .function_flags = OXYGEN_FUNCTION_2WIRE, + .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, + .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, +}; + static int __devinit get_xonar_model(struct oxygen *chip, const struct pci_device_id *id) { @@ -881,6 +1067,7 @@ static int __devinit get_xonar_model(struct oxygen *chip, [MODEL_D2] = &model_xonar_d2, [MODEL_D2X] = &model_xonar_d2, [MODEL_HDAV] = &model_xonar_hdav, + [MODEL_STX] = &model_xonar_st, }; static const char *const names[] = { [MODEL_D1] = "Xonar D1", @@ -889,6 +1076,7 @@ static int __devinit get_xonar_model(struct oxygen *chip, [MODEL_D2X] = "Xonar D2X", [MODEL_HDAV] = "Xonar HDAV1.3", [MODEL_HDAV_H6] = "Xonar HDAV1.3+H6", + [MODEL_STX] = "Xonar Essence STX", }; unsigned int model = id->driver_data; @@ -916,6 +1104,10 @@ static int __devinit get_xonar_model(struct oxygen *chip, return -ENODEV; } break; + case MODEL_STX: + oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, + GPIO_HDAV_DB_MASK); + break; } chip->model.shortname = names[model]; -- cgit v1.2.3 From 5d44aa4c7322e0cda6d71cc3f0dffaceea0daae5 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:29:29 +0100 Subject: sound/oss: fix sparse warnings: different signedness Impact: Change signature of 'set_volume_stereo' and 'set_volume_mono'. Fix this sparse warnings: sound/oss/pss.c:545:42: warning: incorrect type in argument 2 (different signedness) sound/oss/pss.c:546:42: warning: incorrect type in argument 3 (different signedness) sound/oss/pss.c:554:59: warning: incorrect type in argument 2 (different signedness) sound/oss/pss.c:560:59: warning: incorrect type in argument 2 (different signedness) sound/oss/pss.c:566:59: warning: incorrect type in argument 2 (different signedness) Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/oss/pss.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 16ed06950dc1..16517a5a1301 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -457,10 +457,9 @@ static void pss_mixer_reset(pss_confdata *devc) } } -static int set_volume_mono(unsigned __user *p, int *aleft) +static int set_volume_mono(unsigned __user *p, unsigned int *aleft) { - int left; - unsigned volume; + unsigned int left, volume; if (get_user(volume, p)) return -EFAULT; @@ -471,10 +470,11 @@ static int set_volume_mono(unsigned __user *p, int *aleft) return 0; } -static int set_volume_stereo(unsigned __user *p, int *aleft, int *aright) +static int set_volume_stereo(unsigned __user *p, + unsigned int *aleft, + unsigned int *aright) { - int left, right; - unsigned volume; + unsigned int left, right, volume; if (get_user(volume, p)) return -EFAULT; -- cgit v1.2.3 From e5bf48437370f3fc603e2dce12e8d3fb1a6a2457 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:29:47 +0100 Subject: sound/oss: fix sparse warning: symbol shadows an earlier one Impact: Move variable to a more inner scope. Fix this sparse warning: sound/oss/sequencer.c:235:29: warning: symbol 'err' shadows an earlier one sound/oss/sequencer.c:215:13: originally declared here Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/oss/sequencer.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c index 5c215f787ca9..c79874696bec 100644 --- a/sound/oss/sequencer.c +++ b/sound/oss/sequencer.c @@ -212,7 +212,6 @@ int sequencer_write(int dev, struct file *file, const char __user *buf, int coun { unsigned char event_rec[EV_SZ], ev_code; int p = 0, c, ev_size; - int err; int mode = translate_mode(file); dev = dev >> 4; @@ -285,7 +284,7 @@ int sequencer_write(int dev, struct file *file, const char __user *buf, int coun { if (!midi_opened[event_rec[2]]) { - int mode; + int err, mode; int dev = event_rec[2]; if (dev >= max_mididev || midi_devs[dev]==NULL) -- cgit v1.2.3 From 619389882ba37121d0f2f7b08e4944e47b379118 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:26:48 +0100 Subject: ALSA: sound/usb/usx2y: fix sparse warning: Should it be static? Impact: Move declaration to header file. Fix this sparse warning: sound/usb/usx2y/usx2yhwdeppcm.c:739:5: warning: symbol 'usX2Y_hwdep_pcm_new' was not declared. Should it be static? Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/usb/usx2y/usX2Yhwdep.c | 3 --- sound/usb/usx2y/usx2yhwdeppcm.h | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c index 1558a5c4094f..fc650c800afc 100644 --- a/sound/usb/usx2y/usX2Yhwdep.c +++ b/sound/usb/usx2y/usX2Yhwdep.c @@ -30,9 +30,6 @@ #include "usbusx2y.h" #include "usX2Yhwdep.h" -int usX2Y_hwdep_pcm_new(struct snd_card *card); - - static int snd_us428ctls_vm_fault(struct vm_area_struct *area, struct vm_fault *vmf) { diff --git a/sound/usb/usx2y/usx2yhwdeppcm.h b/sound/usb/usx2y/usx2yhwdeppcm.h index c3382fdc386b..9c4fb84b2aa0 100644 --- a/sound/usb/usx2y/usx2yhwdeppcm.h +++ b/sound/usb/usx2y/usx2yhwdeppcm.h @@ -18,3 +18,5 @@ struct snd_usX2Y_hwdep_pcm_shm { volatile unsigned captured_iso_frames; int capture_iso_start; }; + +int usX2Y_hwdep_pcm_new(struct snd_card *card); -- cgit v1.2.3 From 3a755ec2e8af0024a06a5adbcc81c012eae61782 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:28:26 +0100 Subject: ALSA: sound/usb/usx2y: fix sparse warning: do-while statement is not a compound ... Fix this sparse warning: sound/usb/usx2y/usbusx2y.c:231:33: warning: do-while statement is not a compound statement Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/usb/usx2y/usbusx2y.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index 11639bd72a51..c545a02dee48 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -227,9 +227,9 @@ static void i_usX2Y_In04Int(struct urb *urb) if (usX2Y->US04) { if (0 == usX2Y->US04->submitted) - do + do { err = usb_submit_urb(usX2Y->US04->urb[usX2Y->US04->submitted++], GFP_ATOMIC); - while (!err && usX2Y->US04->submitted < usX2Y->US04->len); + } while (!err && usX2Y->US04->submitted < usX2Y->US04->len); } else if (us428ctls && us428ctls->p4outLast >= 0 && us428ctls->p4outLast < N_us428_p4out_BUFS) { if (us428ctls->p4outLast != us428ctls->p4outSent) { -- cgit v1.2.3 From d73d341d3995ae3c63a4b4543b7c308ebd1e58ea Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:29:15 +0100 Subject: ALSA: sound/drivers/vx: fix sparse warning: different signedness Fix this sparse warning: sound/drivers/vx/vx_uer.c:301:42: warning: incorrect type in argument 2 (different signedness) Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/drivers/vx/vx_uer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/drivers/vx/vx_uer.c b/sound/drivers/vx/vx_uer.c index 0e1ba9b47904..b0560fec6bba 100644 --- a/sound/drivers/vx/vx_uer.c +++ b/sound/drivers/vx/vx_uer.c @@ -103,7 +103,7 @@ static void vx_write_one_cbit(struct vx_core *chip, int index, int val) * returns the frequency of UER, or 0 if not sync, * or a negative error code. */ -static int vx_read_uer_status(struct vx_core *chip, int *mode) +static int vx_read_uer_status(struct vx_core *chip, unsigned int *mode) { int val, freq; -- cgit v1.2.3 From 730d45f9130f81fd49009301e9dfbd19fe2b3e1f Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:28:59 +0100 Subject: ALSA: sound/pci/emu10k1: fix sparse warning: different signedness Fix this sparse warnings: sound/pci/emu10k1/emu10k1_main.c:723:66: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:724:68: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:748:74: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:751:66: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:759:73: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:760:73: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:837:50: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:845:50: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:881:50: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:889:57: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:890:57: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:895:60: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:897:60: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:899:60: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:910:56: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:914:57: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:918:56: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:922:57: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:924:58: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:936:60: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:1073:60: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:1088:60: warning: incorrect type in argument 3 (different signedness) sound/pci/emu10k1/emu10k1_main.c:1093:58: warning: incorrect type in argument 3 (different signedness) Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emu10k1_main.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 8343aecbd25f..e6836fc33880 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -711,8 +711,7 @@ static int snd_emu1010_load_firmware(struct snd_emu10k1 *emu, const char *filena static int emu1010_firmware_thread(void *data) { struct snd_emu10k1 *emu = data; - int tmp, tmp2; - int reg; + u32 tmp, tmp2, reg; int err; for (;;) { @@ -758,7 +757,7 @@ static int emu1010_firmware_thread(void *data) snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n"); snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp); snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2); - snd_printk(KERN_INFO "Audio Dock ver:%d.%d\n", + snd_printk(KERN_INFO "Audio Dock ver: %u.%u\n", tmp, tmp2); /* Sync clocking between 1010 and Dock */ /* Allow DLL to settle */ @@ -805,8 +804,7 @@ static int emu1010_firmware_thread(void *data) static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) { unsigned int i; - int tmp, tmp2; - int reg; + u32 tmp, tmp2, reg; int err; const char *filename = NULL; @@ -888,7 +886,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n"); snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp); snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2); - snd_printk(KERN_INFO "emu1010: Hana version: %d.%d\n", tmp, tmp2); + snd_printk(KERN_INFO "emu1010: Hana version: %u.%u\n", tmp, tmp2); /* Enable 48Volt power to Audio Dock */ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON); -- cgit v1.2.3 From 5d9b6c07831456b7a7d90eac31c853d60eaf8ab6 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Wed, 25 Feb 2009 22:28:45 +0100 Subject: ALSA: sound/pci/hda: fix sparse warning: different signedness Fix this sparse warning: sound/pci/hda/hda_codec.c:1544:19: warning: incorrect type in assignment (different signedness) sound/pci/hda/hda_codec.c:1544:19: expected unsigned long *vals sound/pci/hda/hda_codec.c:1544:19: got long * Signed-off-by: Hannes Eder Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_local.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 4bd82a37a4c8..03ee9dd04913 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -136,7 +136,7 @@ extern struct hda_ctl_ops snd_hda_bind_sw; /* for bind-switch */ struct hda_bind_ctls { struct hda_ctl_ops *ops; - long values[]; + unsigned long values[]; }; int snd_hda_mixer_bind_ctls_info(struct snd_kcontrol *kcontrol, -- cgit v1.2.3 From 6d5643455ced9ee45a4aa7403fe8056d826bde85 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 Feb 2009 11:29:58 +0100 Subject: ASoC: wm8753 - Fix build error sound/soc/codecs/wm8753.c: In function 'wm8753_probe': sound/soc/codecs/wm8753.c:1577: error: implicit declaration of function 'wm8753_add_controls' Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/codecs/wm8753.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 2241204b5151..7f353e935d71 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1574,7 +1574,8 @@ static int wm8753_probe(struct platform_device *pdev) goto pcm_err; } - wm8753_add_controls(codec); + snd_soc_add_controls(codec, wm8753_snd_controls, + ARRAY_SIZE(wm8753_snd_controls)); wm8753_add_widgets(codec); ret = snd_soc_init_card(socdev); if (ret < 0) { -- cgit v1.2.3 From 23f0c048ba59ad5c2f3fd85ed98360b631dbf6f8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 Feb 2009 13:03:58 +0100 Subject: ALSA: hda - Clean up the input pin setup in automatic mode Clean up the input-pin setup in automatic mode in patch_realtek.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 62 ++++++++++++++++++------------------------- 1 file changed, 26 insertions(+), 36 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d670d33cfa17..b3406302d069 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -760,6 +760,24 @@ static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol, .private_value = nid | (mask<<16) } #endif /* CONFIG_SND_DEBUG */ +/* + * set up the input pin config (depending on the given auto-pin type) + */ +static void alc_set_input_pin(struct hda_codec *codec, hda_nid_t nid, + int auto_pin_type) +{ + unsigned int val = PIN_IN; + + if (auto_pin_type <= AUTO_PIN_FRONT_MIC) { + unsigned int pincap; + pincap = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); + pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT; + if (pincap & AC_PINCAP_VREF_80) + val = PIN_VREF80; + } + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, val); +} + /* */ static void add_mixer(struct alc_spec *spec, struct snd_kcontrol_new *mix) @@ -4188,10 +4206,7 @@ static void alc880_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc880_is_input_pin(nid)) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF80 : PIN_IN); + alc_set_input_pin(codec, nid, i); if (nid != ALC880_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, @@ -5657,10 +5672,7 @@ static void alc260_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (nid >= 0x12) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF80 : PIN_IN); + alc_set_input_pin(codec, nid, i); if (nid != ALC260_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, @@ -7006,16 +7018,7 @@ static void alc882_auto_init_analog_input(struct hda_codec *codec) unsigned int vref; if (!nid) continue; - vref = PIN_IN; - if (1 /*i <= AUTO_PIN_FRONT_MIC*/) { - unsigned int pincap; - pincap = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); - if ((pincap >> AC_PINCAP_VREF_SHIFT) & - AC_PINCAP_VREF_80) - vref = PIN_VREF80; - } - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, vref); + alc_set_input_pin(codec, nid, AUTO_PIN_FRONT_MIC /*i*/); if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, @@ -9100,10 +9103,7 @@ static void alc883_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc883_is_input_pin(nid)) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - (i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF80 : PIN_IN)); + alc_set_input_pin(codec, nid, i); if (nid != ALC883_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, @@ -13831,12 +13831,8 @@ static void alc861_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; - if (nid >= 0x0c && nid <= 0x11) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF80 : PIN_IN); - } + if (nid >= 0x0c && nid <= 0x11) + alc_set_input_pin(codec, nid, i); } } @@ -14803,10 +14799,7 @@ static void alc861vd_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc861vd_is_input_pin(nid)) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF80 : PIN_IN); + alc_set_input_pin(codec, nid, i); if (nid != ALC861VD_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, @@ -16732,10 +16725,7 @@ static void alc662_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc662_is_input_pin(nid)) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - (i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF80 : PIN_IN)); + alc_set_input_pin(codec, nid, i); if (nid != ALC662_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, -- cgit v1.2.3 From 1607b8ea0a4cc20752978fadb027daafc8a2d93c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 Feb 2009 16:50:43 +0100 Subject: ALSA: hda - Add model=auto for STAC/IDT codecs Added the model=auto to STAC/IDT codecs to use the BIOS default setup explicitly. It can be used to disable the device-specific model quirk in the driver. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 8 ++++++++ sound/pci/hda/patch_sigmatel.c | 16 ++++++++++++++++ 2 files changed, 24 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 0e52d273ce96..a448bbefd488 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -280,6 +280,7 @@ STAC9200 gateway-m4 Gateway laptops with EAPD control gateway-m4-2 Gateway laptops with EAPD control panasonic Panasonic CF-74 + auto BIOS setup (default) STAC9205/9254 ============= @@ -288,6 +289,7 @@ STAC9205/9254 dell-m43 Dell Precision dell-m44 Dell Inspiron eapd Keep EAPD on (e.g. Gateway T1616) + auto BIOS setup (default) STAC9220/9221 ============= @@ -311,6 +313,7 @@ STAC9220/9221 dell-d82 Dell (unknown) dell-m81 Dell (unknown) dell-m82 Dell XPS M1210 + auto BIOS setup (default) STAC9202/9250/9251 ================== @@ -322,6 +325,7 @@ STAC9202/9250/9251 m3 Some Gateway MX series laptops m5 Some Gateway MX series laptops (MP6954) m6 Some Gateway NX series laptops + auto BIOS setup (default) STAC9227/9228/9229/927x ======================= @@ -331,6 +335,7 @@ STAC9227/9228/9229/927x 5stack D965 5stack + SPDIF dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup + auto BIOS setup (default) STAC92HD71B* ============ @@ -339,6 +344,7 @@ STAC92HD71B* dell-m4-2 Dell desktops dell-m4-3 Dell desktops hp-m4 HP dv laptops + auto BIOS setup (default) STAC92HD73* =========== @@ -348,11 +354,13 @@ STAC92HD73* dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics dell-eq Dell desktops/laptops + auto BIOS setup (default) STAC92HD83* =========== ref Reference board mic-ref Reference board with power managment for ports + auto BIOS setup (default) STAC9872 ======== diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index da48d8c0b295..37ffd96a9ff2 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -43,6 +43,7 @@ enum { }; enum { + STAC_AUTO, STAC_REF, STAC_9200_OQO, STAC_9200_DELL_D21, @@ -62,6 +63,7 @@ enum { }; enum { + STAC_9205_AUTO, STAC_9205_REF, STAC_9205_DELL_M42, STAC_9205_DELL_M43, @@ -71,6 +73,7 @@ enum { }; enum { + STAC_92HD73XX_AUTO, STAC_92HD73XX_NO_JD, /* no jack-detection */ STAC_92HD73XX_REF, STAC_DELL_M6_AMIC, @@ -81,6 +84,7 @@ enum { }; enum { + STAC_92HD83XXX_AUTO, STAC_92HD83XXX_REF, STAC_92HD83XXX_PWR_REF, STAC_DELL_S14, @@ -88,6 +92,7 @@ enum { }; enum { + STAC_92HD71BXX_AUTO, STAC_92HD71BXX_REF, STAC_DELL_M4_1, STAC_DELL_M4_2, @@ -98,6 +103,7 @@ enum { }; enum { + STAC_925x_AUTO, STAC_925x_REF, STAC_M1, STAC_M1_2, @@ -110,6 +116,7 @@ enum { }; enum { + STAC_922X_AUTO, STAC_D945_REF, STAC_D945GTP3, STAC_D945GTP5, @@ -137,6 +144,7 @@ enum { }; enum { + STAC_927X_AUTO, STAC_D965_REF_NO_JD, /* no jack-detection */ STAC_D965_REF, STAC_D965_3ST, @@ -1488,6 +1496,7 @@ static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = { }; static const char *stac9200_models[STAC_9200_MODELS] = { + [STAC_AUTO] = "auto", [STAC_REF] = "ref", [STAC_9200_OQO] = "oqo", [STAC_9200_DELL_D21] = "dell-d21", @@ -1633,6 +1642,7 @@ static unsigned int *stac925x_brd_tbl[STAC_925x_MODELS] = { }; static const char *stac925x_models[STAC_925x_MODELS] = { + [STAC_925x_AUTO] = "auto", [STAC_REF] = "ref", [STAC_M1] = "m1", [STAC_M1_2] = "m1-2", @@ -1692,6 +1702,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { + [STAC_92HD73XX_AUTO] = "auto", [STAC_92HD73XX_NO_JD] = "no-jd", [STAC_92HD73XX_REF] = "ref", [STAC_DELL_M6_AMIC] = "dell-m6-amic", @@ -1748,6 +1759,7 @@ static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { }; static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { + [STAC_92HD83XXX_AUTO] = "auto", [STAC_92HD83XXX_REF] = "ref", [STAC_92HD83XXX_PWR_REF] = "mic-ref", [STAC_DELL_S14] = "dell-s14", @@ -1802,6 +1814,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = { }; static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = { + [STAC_92HD71BXX_AUTO] = "auto", [STAC_92HD71BXX_REF] = "ref", [STAC_DELL_M4_1] = "dell-m4-1", [STAC_DELL_M4_2] = "dell-m4-2", @@ -1973,6 +1986,7 @@ static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = { }; static const char *stac922x_models[STAC_922X_MODELS] = { + [STAC_922X_AUTO] = "auto", [STAC_D945_REF] = "ref", [STAC_D945GTP5] = "5stack", [STAC_D945GTP3] = "3stack", @@ -2125,6 +2139,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { }; static const char *stac927x_models[STAC_927X_MODELS] = { + [STAC_927X_AUTO] = "auto", [STAC_D965_REF_NO_JD] = "ref-no-jd", [STAC_D965_REF] = "ref", [STAC_D965_3ST] = "3stack", @@ -2222,6 +2237,7 @@ static unsigned int *stac9205_brd_tbl[STAC_9205_MODELS] = { }; static const char *stac9205_models[STAC_9205_MODELS] = { + [STAC_9205_AUTO] = "auto", [STAC_9205_REF] = "ref", [STAC_9205_DELL_M42] = "dell-m42", [STAC_9205_DELL_M43] = "dell-m43", -- cgit v1.2.3 From 28fd2d397bab5c7fb0eed0c20b6766c99ae34a8f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:33 +0000 Subject: [ARM] S3C64XX: Set GPIO pin when select IRQ_EINT type Set the GPIO pin mode to external interrupt when configuring an IRQ_EINT's IRQ type. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5c..5d62f2799ea9 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,12 +14,15 @@ #include #include +#include #include #include #include #include +#include +#include #include #include @@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); + int pin; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) ctrl |= newvalue << shift; __raw_writel(ctrl, reg); + /* set the GPIO pin appropriately */ + + if (offs < 23) + pin = S3C64XX_GPN(offs); + else + pin = S3C64XX_GPM(offs - 23); + + s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + return 0; } -- cgit v1.2.3 From 789b4ad36c7037758309df98f1efa65d0c26527d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Jan 2009 19:12:01 +0000 Subject: [ARM] S3C64XX: Fix section mismatch for s3c64xx_register_clocks() Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 136c982c68e1..ad1b9682c9c3 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = { &clk_48m, }; -void s3c64xx_register_clocks(void) +void __init s3c64xx_register_clocks(void) { struct clk *clkp; int ret; -- cgit v1.2.3 From 778974797793e7dcd42e3701e09c686b6419cb35 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:41 +0000 Subject: [ARM] SMDK6410: Correct I2C device name for WM8580 The WM8580 driver registers itself as "wm8580" rather than "WM8580". Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 3c4d47145c83..0436783c87d4 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("WM8580", 0X1b), }, + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info i2c_devs1[] __initdata = { -- cgit v1.2.3 From 027191a8c6602d3fb6dde3820517339e1daf191d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:43 +0000 Subject: [ARM] SMDK6410: Declare iodesc table static Shuts up a warning. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 0436783c87d4..25f7935576f8 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; -struct map_desc smdk6410_iodesc[] = {}; +static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { #ifdef CONFIG_SMDK6410_SD_CH0 -- cgit v1.2.3 From 8bd8dbdf3725ce569467bd704840249869f626d6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 16:29:44 +0000 Subject: [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint() It's an initcall and does not need to be exported. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq-eint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 5d62f2799ea9..8d1b7290aa13 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -194,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) s3c_irq_demux_eint(20, 27); } -int __init s3c64xx_init_irq_eint(void) +static int __init s3c64xx_init_irq_eint(void) { int irq; -- cgit v1.2.3 From 24d4076734b4ecf083a6be611040fe0743e59989 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 23 Jan 2009 17:06:23 +0000 Subject: [ARM] S3C64XX: Do gpiolib configuration earlier arch_initcall() runs after the machine init function which means that any configuration of GPIO pins must currently be done later on, for example in callbacks from drivers. Move the initialisation earlier in order to allow machines to configure GPIOs directly in their init functions rather than having to have a callback invoked later on. Some other ARM platforms use this method. Other solutions for this include providing a special interface for setting up GPIOs en masse, adding callbacks to do the GPIO configuration from devices and doing the GPIO configuration implicitly. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index cc62941d7b5c..ee9188add8fb 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void) return 0; } -arch_initcall(s3c64xx_gpiolib_init); +core_initcall(s3c64xx_gpiolib_init); -- cgit v1.2.3 From 4271c3bd46a0f0448118cf618c7210237a98e6bf Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:27 +0000 Subject: [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH The USB OHCI host device expects the IRQ definition to be named IRQ_USBH, so rename the S3C64XX IRQ header to match. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 2846f550b727..f865bf4d709e 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -117,7 +117,7 @@ #define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) #define IRQ_NFC S3C64XX_IRQ_VIC1(13) #define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_UHOST S3C64XX_IRQ_VIC1(15) +#define IRQ_USBH S3C64XX_IRQ_VIC1(15) #define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) #define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) #define IRQ_IIC S3C64XX_IRQ_VIC1(18) -- cgit v1.2.3 From 19c5957081a6ffbf014e6c944e6aafee3c1632c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:33 +0000 Subject: [ARM] S3C64XX: Fix name of USB host clock. The usb-host-bus clock should be named usb-bus-host. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 8d9a0cada668..a2f526bcb389 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -351,7 +351,7 @@ static struct clksrc_clk clk_mmc2 = { static struct clksrc_clk clk_usbhost = { .clk = { - .name = "usb-host-bus", + .name = "usb-bus-host", .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, -- cgit v1.2.3 From 41ba41d7c7e1d2a3c9cdfe16c1ee9f7af4693ae2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:00:34 +0000 Subject: [ARM] S3C64XX: Fix USB host clock mux list The clock list for the USB host bus clock was in the wrong order, move clk_48m to position 0. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index a2f526bcb389..2984270b40a7 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = { }; static struct clk *clkset_uhost_list[] = { + &clk_48m, &clk_mout_epll.clk, &clk_dout_mpll, &clk_fin_epll, - &clk_48m, }; static struct clk_sources clkset_uhost = { -- cgit v1.2.3 From 1d1e97562e5e2ac60fb7b25437ba619f95f67fab Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Thu, 26 Feb 2009 18:27:38 -0600 Subject: keys: distinguish per-uid keys in different namespaces per-uid keys were looked by uid only. Use the user namespace to distinguish the same uid in different namespaces. This does not address key_permission. So a task can for instance try to join a keyring owned by the same uid in another namespace. That will be handled by a separate patch. Signed-off-by: Serge E. Hallyn Acked-by: David Howells Signed-off-by: James Morris --- kernel/user.c | 2 +- security/keys/internal.h | 4 +++- security/keys/key.c | 11 +++++++++-- security/keys/keyctl.c | 2 +- security/keys/process_keys.c | 2 ++ security/keys/request_key.c | 2 +- 6 files changed, 17 insertions(+), 6 deletions(-) diff --git a/kernel/user.c b/kernel/user.c index 477b6660f447..d8b332c3ae3a 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -20,7 +20,7 @@ struct user_namespace init_user_ns = { .kref = { - .refcount = ATOMIC_INIT(1), + .refcount = ATOMIC_INIT(2), }, .creator = &root_user, }; diff --git a/security/keys/internal.h b/security/keys/internal.h index 81932abefe7b..9fb679c66b8a 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -53,6 +53,7 @@ struct key_user { atomic_t nkeys; /* number of keys */ atomic_t nikeys; /* number of instantiated keys */ uid_t uid; + struct user_namespace *user_ns; int qnkeys; /* number of keys allocated to this user */ int qnbytes; /* number of bytes allocated to this user */ }; @@ -61,7 +62,8 @@ extern struct rb_root key_user_tree; extern spinlock_t key_user_lock; extern struct key_user root_key_user; -extern struct key_user *key_user_lookup(uid_t uid); +extern struct key_user *key_user_lookup(uid_t uid, + struct user_namespace *user_ns); extern void key_user_put(struct key_user *user); /* diff --git a/security/keys/key.c b/security/keys/key.c index f76c8a546fd3..4a1297d1ada4 100644 --- a/security/keys/key.c +++ b/security/keys/key.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "internal.h" static struct kmem_cache *key_jar; @@ -60,7 +61,7 @@ void __key_check(const struct key *key) * get the key quota record for a user, allocating a new record if one doesn't * already exist */ -struct key_user *key_user_lookup(uid_t uid) +struct key_user *key_user_lookup(uid_t uid, struct user_namespace *user_ns) { struct key_user *candidate = NULL, *user; struct rb_node *parent = NULL; @@ -79,6 +80,10 @@ struct key_user *key_user_lookup(uid_t uid) p = &(*p)->rb_left; else if (uid > user->uid) p = &(*p)->rb_right; + else if (user_ns < user->user_ns) + p = &(*p)->rb_left; + else if (user_ns > user->user_ns) + p = &(*p)->rb_right; else goto found; } @@ -106,6 +111,7 @@ struct key_user *key_user_lookup(uid_t uid) atomic_set(&candidate->nkeys, 0); atomic_set(&candidate->nikeys, 0); candidate->uid = uid; + candidate->user_ns = get_user_ns(user_ns); candidate->qnkeys = 0; candidate->qnbytes = 0; spin_lock_init(&candidate->lock); @@ -136,6 +142,7 @@ void key_user_put(struct key_user *user) if (atomic_dec_and_lock(&user->usage, &key_user_lock)) { rb_erase(&user->node, &key_user_tree); spin_unlock(&key_user_lock); + put_user_ns(user->user_ns); kfree(user); } @@ -234,7 +241,7 @@ struct key *key_alloc(struct key_type *type, const char *desc, quotalen = desclen + type->def_datalen; /* get hold of the key tracking for this user */ - user = key_user_lookup(uid); + user = key_user_lookup(uid, cred->user->user_ns); if (!user) goto no_memory_1; diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index b1ec3b4ee17d..7f09fb897d2b 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -726,7 +726,7 @@ long keyctl_chown_key(key_serial_t id, uid_t uid, gid_t gid) /* change the UID */ if (uid != (uid_t) -1 && uid != key->uid) { ret = -ENOMEM; - newowner = key_user_lookup(uid); + newowner = key_user_lookup(uid, current_user_ns()); if (!newowner) goto error_put; diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c index 2f5d89e92b85..276d27882ce8 100644 --- a/security/keys/process_keys.c +++ b/security/keys/process_keys.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include "internal.h" @@ -34,6 +35,7 @@ struct key_user root_key_user = { .nkeys = ATOMIC_INIT(2), .nikeys = ATOMIC_INIT(2), .uid = 0, + .user_ns = &init_user_ns, }; /*****************************************************************************/ diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 0e04f72ef2d4..22a31582bfaa 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -365,7 +365,7 @@ static struct key *construct_key_and_link(struct key_type *type, kenter(""); - user = key_user_lookup(current_fsuid()); + user = key_user_lookup(current_fsuid(), current_user_ns()); if (!user) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 8ff3bc3138a400294ee9e126ac75fc9a9fae4e0b Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Thu, 26 Feb 2009 18:27:47 -0600 Subject: keys: consider user namespace in key_permission If a key is owned by another user namespace, then treat the key as though it is owned by both another uid and gid. Signed-off-by: Serge E. Hallyn Acked-by: David Howells Signed-off-by: James Morris --- security/keys/permission.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/security/keys/permission.c b/security/keys/permission.c index 5d9fc7b93f2e..0ed802c9e698 100644 --- a/security/keys/permission.c +++ b/security/keys/permission.c @@ -35,6 +35,9 @@ int key_task_permission(const key_ref_t key_ref, const struct cred *cred, key = key_ref_to_ptr(key_ref); + if (key->user->user_ns != cred->user->user_ns) + goto use_other_perms; + /* use the second 8-bits of permissions for keys the caller owns */ if (key->uid == cred->fsuid) { kperm = key->perm >> 16; @@ -56,6 +59,8 @@ int key_task_permission(const key_ref_t key_ref, const struct cred *cred, } } +use_other_perms: + /* otherwise use the least-significant 8-bits */ kperm = key->perm; -- cgit v1.2.3 From 2ea190d0a006ce5218baa6e798512652446a605a Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Thu, 26 Feb 2009 18:27:55 -0600 Subject: keys: skip keys from another user namespace When listing keys, do not return keys belonging to the same uid in another user namespace. Otherwise uid 500 in another user namespace will return keyrings called uid.500 for another user namespace. Signed-off-by: Serge E. Hallyn Acked-by: David Howells Signed-off-by: James Morris --- security/keys/keyring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/security/keys/keyring.c b/security/keys/keyring.c index ed851574d073..3dba81c2eba3 100644 --- a/security/keys/keyring.c +++ b/security/keys/keyring.c @@ -539,6 +539,9 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check) &keyring_name_hash[bucket], type_data.link ) { + if (keyring->user->user_ns != current_user_ns()) + continue; + if (test_bit(KEY_FLAG_REVOKED, &keyring->flags)) continue; -- cgit v1.2.3 From 454804ab0302b354e35d992d08e53fe03313baaf Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Thu, 26 Feb 2009 18:28:04 -0600 Subject: keys: make procfiles per-user-namespace Restrict the /proc/keys and /proc/key-users output to keys belonging to the same user namespace as the reading task. We may want to make this more complicated - so that any keys in a user-namespace which is belongs to the reading task are also shown. But let's see if anyone wants that first. Signed-off-by: Serge E. Hallyn Acked-by: David Howells Signed-off-by: James Morris --- security/keys/proc.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 49 insertions(+), 6 deletions(-) diff --git a/security/keys/proc.c b/security/keys/proc.c index 7f508def50e3..769f9bdfd2b3 100644 --- a/security/keys/proc.c +++ b/security/keys/proc.c @@ -91,6 +91,28 @@ __initcall(key_proc_init); */ #ifdef CONFIG_KEYS_DEBUG_PROC_KEYS +static struct rb_node *__key_serial_next(struct rb_node *n) +{ + while (n) { + struct key *key = rb_entry(n, struct key, serial_node); + if (key->user->user_ns == current_user_ns()) + break; + n = rb_next(n); + } + return n; +} + +static struct rb_node *key_serial_next(struct rb_node *n) +{ + return __key_serial_next(rb_next(n)); +} + +static struct rb_node *key_serial_first(struct rb_root *r) +{ + struct rb_node *n = rb_first(r); + return __key_serial_next(n); +} + static int proc_keys_open(struct inode *inode, struct file *file) { return seq_open(file, &proc_keys_ops); @@ -104,10 +126,10 @@ static void *proc_keys_start(struct seq_file *p, loff_t *_pos) spin_lock(&key_serial_lock); - _p = rb_first(&key_serial_tree); + _p = key_serial_first(&key_serial_tree); while (pos > 0 && _p) { pos--; - _p = rb_next(_p); + _p = key_serial_next(_p); } return _p; @@ -117,7 +139,7 @@ static void *proc_keys_start(struct seq_file *p, loff_t *_pos) static void *proc_keys_next(struct seq_file *p, void *v, loff_t *_pos) { (*_pos)++; - return rb_next((struct rb_node *) v); + return key_serial_next((struct rb_node *) v); } @@ -203,6 +225,27 @@ static int proc_keys_show(struct seq_file *m, void *v) #endif /* CONFIG_KEYS_DEBUG_PROC_KEYS */ +static struct rb_node *__key_user_next(struct rb_node *n) +{ + while (n) { + struct key_user *user = rb_entry(n, struct key_user, node); + if (user->user_ns == current_user_ns()) + break; + n = rb_next(n); + } + return n; +} + +static struct rb_node *key_user_next(struct rb_node *n) +{ + return __key_user_next(rb_next(n)); +} + +static struct rb_node *key_user_first(struct rb_root *r) +{ + struct rb_node *n = rb_first(r); + return __key_user_next(n); +} /*****************************************************************************/ /* * implement "/proc/key-users" to provides a list of the key users @@ -220,10 +263,10 @@ static void *proc_key_users_start(struct seq_file *p, loff_t *_pos) spin_lock(&key_user_lock); - _p = rb_first(&key_user_tree); + _p = key_user_first(&key_user_tree); while (pos > 0 && _p) { pos--; - _p = rb_next(_p); + _p = key_user_next(_p); } return _p; @@ -233,7 +276,7 @@ static void *proc_key_users_start(struct seq_file *p, loff_t *_pos) static void *proc_key_users_next(struct seq_file *p, void *v, loff_t *_pos) { (*_pos)++; - return rb_next((struct rb_node *) v); + return key_user_next((struct rb_node *) v); } -- cgit v1.2.3 From b233b28eac0cc37d07c2d007ea08c86c778c5af4 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Fri, 27 Feb 2009 16:07:32 +0900 Subject: sh: maple: Support block reads and writes. This patch updates the maple bus to support asynchronous block reads and writes as well as generally improving the quality of the code and supporting concurrency (all needed to support the Dreamcast visual memory unit - a driver will also be posted for that). Changes in the bus driver necessitate some changes in the two maple bus input drivers that are currently in mainline. As well as supporting block reads and writes this code clean up removes some poor handling of locks, uses an atomic status variable to serialise access to devices and more robusly handles the general performance problems of the bus. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- drivers/input/joystick/maplecontrol.c | 4 +- drivers/input/keyboard/maple_keyb.c | 37 +-- drivers/sh/maple/maple.c | 463 +++++++++++++++++----------------- include/linux/maple.h | 62 +++-- 4 files changed, 300 insertions(+), 266 deletions(-) diff --git a/drivers/input/joystick/maplecontrol.c b/drivers/input/joystick/maplecontrol.c index e50047bfe938..77cfde571bd9 100644 --- a/drivers/input/joystick/maplecontrol.c +++ b/drivers/input/joystick/maplecontrol.c @@ -3,7 +3,7 @@ * Based on drivers/usb/iforce.c * * Copyright Yaegashi Takeshi, 2001 - * Adrian McMenamin, 2008 + * Adrian McMenamin, 2008 - 2009 */ #include @@ -29,7 +29,7 @@ static void dc_pad_callback(struct mapleq *mq) struct maple_device *mapledev = mq->dev; struct dc_pad *pad = maple_get_drvdata(mapledev); struct input_dev *dev = pad->dev; - unsigned char *res = mq->recvbuf; + unsigned char *res = mq->recvbuf->buf; buttons = ~le16_to_cpup((__le16 *)(res + 8)); diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 22f17a593be7..5aa2361aef95 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -1,8 +1,8 @@ /* * SEGA Dreamcast keyboard driver * Based on drivers/usb/usbkbd.c - * Copyright YAEGASHI Takeshi, 2001 - * Porting to 2.6 Copyright Adrian McMenamin, 2007, 2008 + * Copyright (c) YAEGASHI Takeshi, 2001 + * Porting to 2.6 Copyright (c) Adrian McMenamin, 2007 - 2009 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +33,7 @@ static DEFINE_MUTEX(maple_keyb_mutex); #define NR_SCANCODES 256 -MODULE_AUTHOR("YAEGASHI Takeshi, Adrian McMenamin"); +MODULE_AUTHOR("Adrian McMenamin dev, "Unknown key (scancode %#x) released.", code); } @@ -127,7 +127,7 @@ static void dc_scan_kbd(struct dc_kbd *kbd) input_event(dev, EV_MSC, MSC_SCAN, code); input_report_key(dev, keycode, 1); } else - printk(KERN_DEBUG "maple_keyb: " + dev_dbg(&dev->dev, "Unknown key (scancode %#x) pressed.", code); } @@ -140,7 +140,7 @@ static void dc_kbd_callback(struct mapleq *mq) { struct maple_device *mapledev = mq->dev; struct dc_kbd *kbd = maple_get_drvdata(mapledev); - unsigned long *buf = mq->recvbuf; + unsigned long *buf = (unsigned long *)(mq->recvbuf->buf); /* * We should always get the lock because the only @@ -159,22 +159,27 @@ static void dc_kbd_callback(struct mapleq *mq) static int probe_maple_kbd(struct device *dev) { - struct maple_device *mdev = to_maple_dev(dev); - struct maple_driver *mdrv = to_maple_driver(dev->driver); + struct maple_device *mdev; + struct maple_driver *mdrv; int i, error; struct dc_kbd *kbd; struct input_dev *idev; - if (!(mdev->function & MAPLE_FUNC_KEYBOARD)) - return -EINVAL; + mdev = to_maple_dev(dev); + mdrv = to_maple_driver(dev->driver); kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); - idev = input_allocate_device(); - if (!kbd || !idev) { + if (!kbd) { error = -ENOMEM; goto fail; } + idev = input_allocate_device(); + if (!idev) { + error = -ENOMEM; + goto fail_idev_alloc; + } + kbd->dev = idev; memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode)); @@ -195,7 +200,7 @@ static int probe_maple_kbd(struct device *dev) error = input_register_device(idev); if (error) - goto fail; + goto fail_register; /* Maple polling is locked to VBLANK - which may be just 50/s */ maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, @@ -207,10 +212,12 @@ static int probe_maple_kbd(struct device *dev) return error; -fail: +fail_register: + maple_set_drvdata(mdev, NULL); input_free_device(idev); +fail_idev_alloc: kfree(kbd); - maple_set_drvdata(mdev, NULL); +fail: return error; } diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index 63f0de29aa14..4054fe93d6e4 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -1,16 +1,10 @@ /* * Core maple bus functionality * - * Copyright (C) 2007, 2008 Adrian McMenamin + * Copyright (C) 2007 - 2009 Adrian McMenamin * Copyright (C) 2001 - 2008 Paul Mundt - * - * Based on 2.4 code by: - * - * Copyright (C) 2000-2001 YAEGASHI Takeshi + * Copyright (C) 2000 - 2001 YAEGASHI Takeshi * Copyright (C) 2001 M. R. Brown - * Copyright (C) 2001 Paul Mundt - * - * and others. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -32,7 +26,7 @@ #include #include -MODULE_AUTHOR("Yaegashi Takeshi, Paul Mundt, M. R. Brown, Adrian McMenamin"); +MODULE_AUTHOR("Adrian McMenamin "); MODULE_DESCRIPTION("Maple bus driver for Dreamcast"); MODULE_LICENSE("GPL v2"); MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}"); @@ -49,7 +43,7 @@ static LIST_HEAD(maple_sentq); /* mutex to protect queue of waiting packets */ static DEFINE_MUTEX(maple_wlist_lock); -static struct maple_driver maple_dummy_driver; +static struct maple_driver maple_unsupported_device; static struct device maple_bus; static int subdevice_map[MAPLE_PORTS]; static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr; @@ -62,8 +56,9 @@ struct maple_device_specify { int unit; }; -static bool checked[4]; -static struct maple_device *baseunits[4]; +static bool checked[MAPLE_PORTS]; +static bool empty[MAPLE_PORTS]; +static struct maple_device *baseunits[MAPLE_PORTS]; /** * maple_driver_register - register a maple driver @@ -97,12 +92,20 @@ void maple_driver_unregister(struct maple_driver *drv) EXPORT_SYMBOL_GPL(maple_driver_unregister); /* set hardware registers to enable next round of dma */ -static void maplebus_dma_reset(void) +static void maple_dma_reset(void) { ctrl_outl(MAPLE_MAGIC, MAPLE_RESET); /* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */ ctrl_outl(1, MAPLE_TRIGTYPE); - ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(50000), MAPLE_SPEED); + /* + * Maple system register + * bits 31 - 16 timeout in units of 20nsec + * bit 12 hard trigger - set 0 to keep responding to VBLANK + * bits 9 - 8 set 00 for 2 Mbps, 01 for 1 Mbps + * bits 3 - 0 delay (in 1.3ms) between VBLANK and start of DMA + * max delay is 11 + */ + ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(0xFFFF), MAPLE_SPEED); ctrl_outl(PHYSADDR(maple_sendbuf), MAPLE_DMAADDR); ctrl_outl(1, MAPLE_ENABLE); } @@ -134,21 +137,16 @@ static void maple_release_device(struct device *dev) { struct maple_device *mdev; struct mapleq *mq; - if (!dev) - return; + mdev = to_maple_dev(dev); mq = mdev->mq; - if (mq) { - if (mq->recvbufdcsp) - kmem_cache_free(maple_queue_cache, mq->recvbufdcsp); - kfree(mq); - mq = NULL; - } + kmem_cache_free(maple_queue_cache, mq->recvbuf); + kfree(mq); kfree(mdev); } /** - * maple_add_packet - add a single instruction to the queue + * maple_add_packet - add a single instruction to the maple bus queue * @mdev: maple device * @function: function on device being queried * @command: maple command to add @@ -158,68 +156,12 @@ static void maple_release_device(struct device *dev) int maple_add_packet(struct maple_device *mdev, u32 function, u32 command, size_t length, void *data) { - int locking, ret = 0; + int ret = 0; void *sendbuf = NULL; - mutex_lock(&maple_wlist_lock); - /* bounce if device already locked */ - locking = mutex_is_locked(&mdev->mq->mutex); - if (locking) { - ret = -EBUSY; - goto out; - } - - mutex_lock(&mdev->mq->mutex); - if (length) { - sendbuf = kmalloc(length * 4, GFP_KERNEL); + sendbuf = kzalloc(length * 4, GFP_KERNEL); if (!sendbuf) { - mutex_unlock(&mdev->mq->mutex); - ret = -ENOMEM; - goto out; - } - ((__be32 *)sendbuf)[0] = cpu_to_be32(function); - } - - mdev->mq->command = command; - mdev->mq->length = length; - if (length > 1) - memcpy(sendbuf + 4, data, (length - 1) * 4); - mdev->mq->sendbuf = sendbuf; - - list_add(&mdev->mq->list, &maple_waitq); -out: - mutex_unlock(&maple_wlist_lock); - return ret; -} -EXPORT_SYMBOL_GPL(maple_add_packet); - -/** - * maple_add_packet_sleeps - add a single instruction to the queue - * @mdev: maple device - * @function: function on device being queried - * @command: maple command to add - * @length: length of command string (in 32 bit words) - * @data: remainder of command string - * - * Same as maple_add_packet(), but waits for the lock to become free. - */ -int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, - u32 command, size_t length, void *data) -{ - int locking, ret = 0; - void *sendbuf = NULL; - - locking = mutex_lock_interruptible(&mdev->mq->mutex); - if (locking) { - ret = -EIO; - goto out; - } - - if (length) { - sendbuf = kmalloc(length * 4, GFP_KERNEL); - if (!sendbuf) { - mutex_unlock(&mdev->mq->mutex); ret = -ENOMEM; goto out; } @@ -233,38 +175,35 @@ int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, mdev->mq->sendbuf = sendbuf; mutex_lock(&maple_wlist_lock); - list_add(&mdev->mq->list, &maple_waitq); + list_add_tail(&mdev->mq->list, &maple_waitq); mutex_unlock(&maple_wlist_lock); out: return ret; } -EXPORT_SYMBOL_GPL(maple_add_packet_sleeps); +EXPORT_SYMBOL_GPL(maple_add_packet); static struct mapleq *maple_allocq(struct maple_device *mdev) { struct mapleq *mq; - mq = kmalloc(sizeof(*mq), GFP_KERNEL); + mq = kzalloc(sizeof(*mq), GFP_KERNEL); if (!mq) goto failed_nomem; + INIT_LIST_HEAD(&mq->list); mq->dev = mdev; - mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL); - mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp); + mq->recvbuf = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL); if (!mq->recvbuf) goto failed_p2; - /* - * most devices do not need the mutex - but - * anything that injects block reads or writes - * will rely on it - */ - mutex_init(&mq->mutex); + mq->recvbuf->buf = &((mq->recvbuf->bufx)[0]); return mq; failed_p2: kfree(mq); failed_nomem: + dev_err(&mdev->dev, "could not allocate memory for device (%d, %d)\n", + mdev->port, mdev->unit); return NULL; } @@ -272,12 +211,16 @@ static struct maple_device *maple_alloc_dev(int port, int unit) { struct maple_device *mdev; + /* zero this out to avoid kobj subsystem + * thinking it has already been registered */ + mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); if (!mdev) return NULL; mdev->port = port; mdev->unit = unit; + mdev->mq = maple_allocq(mdev); if (!mdev->mq) { @@ -286,19 +229,14 @@ static struct maple_device *maple_alloc_dev(int port, int unit) } mdev->dev.bus = &maple_bus_type; mdev->dev.parent = &maple_bus; + init_waitqueue_head(&mdev->maple_wait); return mdev; } static void maple_free_dev(struct maple_device *mdev) { - if (!mdev) - return; - if (mdev->mq) { - if (mdev->mq->recvbufdcsp) - kmem_cache_free(maple_queue_cache, - mdev->mq->recvbufdcsp); - kfree(mdev->mq); - } + kmem_cache_free(maple_queue_cache, mdev->mq->recvbuf); + kfree(mdev->mq); kfree(mdev); } @@ -320,7 +258,7 @@ static void maple_build_block(struct mapleq *mq) maple_lastptr = maple_sendptr; *maple_sendptr++ = (port << 16) | len | 0x80000000; - *maple_sendptr++ = PHYSADDR(mq->recvbuf); + *maple_sendptr++ = PHYSADDR(mq->recvbuf->buf); *maple_sendptr++ = mq->command | (to << 8) | (from << 16) | (len << 24); while (len-- > 0) @@ -333,20 +271,28 @@ static void maple_send(void) int i, maple_packets = 0; struct mapleq *mq, *nmq; - if (!list_empty(&maple_sentq)) + if (!maple_dma_done()) return; + + /* disable DMA */ + ctrl_outl(0, MAPLE_ENABLE); + + if (!list_empty(&maple_sentq)) + goto finish; + mutex_lock(&maple_wlist_lock); - if (list_empty(&maple_waitq) || !maple_dma_done()) { + if (list_empty(&maple_waitq)) { mutex_unlock(&maple_wlist_lock); - return; + goto finish; } - mutex_unlock(&maple_wlist_lock); + maple_lastptr = maple_sendbuf; maple_sendptr = maple_sendbuf; - mutex_lock(&maple_wlist_lock); + list_for_each_entry_safe(mq, nmq, &maple_waitq, list) { maple_build_block(mq); - list_move(&mq->list, &maple_sentq); + list_del_init(&mq->list); + list_add_tail(&mq->list, &maple_sentq); if (maple_packets++ > MAPLE_MAXPACKETS) break; } @@ -356,10 +302,13 @@ static void maple_send(void) dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE, PAGE_SIZE, DMA_BIDIRECTIONAL); } + +finish: + maple_dma_reset(); } /* check if there is a driver registered likely to match this device */ -static int check_matching_maple_driver(struct device_driver *driver, +static int maple_check_matching_driver(struct device_driver *driver, void *devptr) { struct maple_driver *maple_drv; @@ -374,10 +323,7 @@ static int check_matching_maple_driver(struct device_driver *driver, static void maple_detach_driver(struct maple_device *mdev) { - if (!mdev) - return; device_unregister(&mdev->dev); - mdev = NULL; } /* process initial MAPLE_COMMAND_DEVINFO for each device or port */ @@ -385,9 +331,9 @@ static void maple_attach_driver(struct maple_device *mdev) { char *p, *recvbuf; unsigned long function; - int matched, retval; + int matched, error; - recvbuf = mdev->mq->recvbuf; + recvbuf = mdev->mq->recvbuf->buf; /* copy the data as individual elements in * case of memory optimisation */ memcpy(&mdev->devinfo.function, recvbuf + 4, 4); @@ -395,7 +341,6 @@ static void maple_attach_driver(struct maple_device *mdev) memcpy(&mdev->devinfo.area_code, recvbuf + 20, 1); memcpy(&mdev->devinfo.connector_direction, recvbuf + 21, 1); memcpy(&mdev->devinfo.product_name[0], recvbuf + 22, 30); - memcpy(&mdev->devinfo.product_licence[0], recvbuf + 52, 60); memcpy(&mdev->devinfo.standby_power, recvbuf + 112, 2); memcpy(&mdev->devinfo.max_power, recvbuf + 114, 2); memcpy(mdev->product_name, mdev->devinfo.product_name, 30); @@ -414,43 +359,41 @@ static void maple_attach_driver(struct maple_device *mdev) else break; - printk(KERN_INFO "Maple device detected: %s\n", - mdev->product_name); - printk(KERN_INFO "Maple device: %s\n", mdev->product_licence); - function = be32_to_cpu(mdev->devinfo.function); + dev_info(&mdev->dev, "detected %s: function 0x%lX: at (%d, %d)\n", + mdev->product_name, function, mdev->port, mdev->unit); + if (function > 0x200) { /* Do this silently - as not a real device */ function = 0; - mdev->driver = &maple_dummy_driver; + mdev->driver = &maple_unsupported_device; sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port); + } else { - printk(KERN_INFO - "Maple bus at (%d, %d): Function 0x%lX\n", - mdev->port, mdev->unit, function); matched = bus_for_each_drv(&maple_bus_type, NULL, mdev, - check_matching_maple_driver); + maple_check_matching_driver); if (matched == 0) { /* Driver does not exist yet */ - printk(KERN_INFO - "No maple driver found.\n"); - mdev->driver = &maple_dummy_driver; + dev_info(&mdev->dev, "no driver found\n"); + mdev->driver = &maple_unsupported_device; } sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port, mdev->unit, function); } + mdev->function = function; mdev->dev.release = &maple_release_device; - retval = device_register(&mdev->dev); - if (retval) { - printk(KERN_INFO - "Maple bus: Attempt to register device" - " (%x, %x) failed.\n", - mdev->port, mdev->unit); + + atomic_set(&mdev->busy, 0); + error = device_register(&mdev->dev); + if (error) { + dev_warn(&mdev->dev, "could not register device at" + " (%d, %d), with error 0x%X\n", mdev->unit, + mdev->port, error); maple_free_dev(mdev); mdev = NULL; return; @@ -462,7 +405,7 @@ static void maple_attach_driver(struct maple_device *mdev) * port and unit then return 1 - allows identification * of which devices need to be attached or detached */ -static int detach_maple_device(struct device *device, void *portptr) +static int check_maple_device(struct device *device, void *portptr) { struct maple_device_specify *ds; struct maple_device *mdev; @@ -477,21 +420,25 @@ static int detach_maple_device(struct device *device, void *portptr) static int setup_maple_commands(struct device *device, void *ignored) { int add; - struct maple_device *maple_dev = to_maple_dev(device); - - if ((maple_dev->interval > 0) - && time_after(jiffies, maple_dev->when)) { - /* bounce if we cannot lock */ - add = maple_add_packet(maple_dev, - be32_to_cpu(maple_dev->devinfo.function), + struct maple_device *mdev = to_maple_dev(device); + if (mdev->interval > 0 && atomic_read(&mdev->busy) == 0 && + time_after(jiffies, mdev->when)) { + /* bounce if we cannot add */ + add = maple_add_packet(mdev, + be32_to_cpu(mdev->devinfo.function), MAPLE_COMMAND_GETCOND, 1, NULL); if (!add) - maple_dev->when = jiffies + maple_dev->interval; + mdev->when = jiffies + mdev->interval; } else { if (time_after(jiffies, maple_pnp_time)) - /* This will also bounce */ - maple_add_packet(maple_dev, 0, - MAPLE_COMMAND_DEVINFO, 0, NULL); + /* Ensure we don't have block reads and devinfo + * calls interfering with one another - so flag the + * device as busy */ + if (atomic_read(&mdev->busy) == 0) { + atomic_set(&mdev->busy, 1); + maple_add_packet(mdev, 0, + MAPLE_COMMAND_DEVINFO, 0, NULL); + } } return 0; } @@ -499,29 +446,50 @@ static int setup_maple_commands(struct device *device, void *ignored) /* VBLANK bottom half - implemented via workqueue */ static void maple_vblank_handler(struct work_struct *work) { - if (!list_empty(&maple_sentq) || !maple_dma_done()) + int x, locking; + struct maple_device *mdev; + + if (!maple_dma_done()) return; ctrl_outl(0, MAPLE_ENABLE); + if (!list_empty(&maple_sentq)) + goto finish; + + /* + * Set up essential commands - to fetch data and + * check devices are still present + */ bus_for_each_dev(&maple_bus_type, NULL, NULL, - setup_maple_commands); + setup_maple_commands); + + if (time_after(jiffies, maple_pnp_time)) { + /* + * Scan the empty ports - bus is flakey and may have + * mis-reported emptyness + */ + for (x = 0; x < MAPLE_PORTS; x++) { + if (checked[x] && empty[x]) { + mdev = baseunits[x]; + if (!mdev) + break; + atomic_set(&mdev->busy, 1); + locking = maple_add_packet(mdev, 0, + MAPLE_COMMAND_DEVINFO, 0, NULL); + if (!locking) + break; + } + } - if (time_after(jiffies, maple_pnp_time)) maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL; - - mutex_lock(&maple_wlist_lock); - if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) { - mutex_unlock(&maple_wlist_lock); - maple_send(); - } else { - mutex_unlock(&maple_wlist_lock); } - maplebus_dma_reset(); +finish: + maple_send(); } -/* handle devices added via hotplugs - placing them on queue for DEVINFO*/ +/* handle devices added via hotplugs - placing them on queue for DEVINFO */ static void maple_map_subunits(struct maple_device *mdev, int submask) { int retval, k, devcheck; @@ -533,7 +501,7 @@ static void maple_map_subunits(struct maple_device *mdev, int submask) ds.unit = k + 1; retval = bus_for_each_dev(&maple_bus_type, NULL, &ds, - detach_maple_device); + check_maple_device); if (retval) { submask = submask >> 1; continue; @@ -543,6 +511,7 @@ static void maple_map_subunits(struct maple_device *mdev, int submask) mdev_add = maple_alloc_dev(mdev->port, k + 1); if (!mdev_add) return; + atomic_set(&mdev_add->busy, 1); maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO, 0, NULL); /* mark that we are checking sub devices */ @@ -564,27 +533,45 @@ static void maple_clean_submap(struct maple_device *mdev) } /* handle empty port or hotplug removal */ -static void maple_response_none(struct maple_device *mdev, - struct mapleq *mq) -{ - if (mdev->unit != 0) { - list_del(&mq->list); - maple_clean_submap(mdev); - printk(KERN_INFO - "Maple bus device detaching at (%d, %d)\n", - mdev->port, mdev->unit); +static void maple_response_none(struct maple_device *mdev) +{ + maple_clean_submap(mdev); + + if (likely(mdev->unit != 0)) { + /* + * Block devices play up + * and give the impression they have + * been removed even when still in place or + * trip the mtd layer when they have + * really gone - this code traps that eventuality + * and ensures we aren't overloaded with useless + * error messages + */ + if (mdev->can_unload) { + if (!mdev->can_unload(mdev)) { + atomic_set(&mdev->busy, 2); + wake_up(&mdev->maple_wait); + return; + } + } + + dev_info(&mdev->dev, "detaching device at (%d, %d)\n", + mdev->port, mdev->unit); maple_detach_driver(mdev); return; - } - if (!started || !fullscan) { - if (checked[mdev->port] == false) { - checked[mdev->port] = true; - printk(KERN_INFO "No maple devices attached" - " to port %d\n", mdev->port); + } else { + if (!started || !fullscan) { + if (checked[mdev->port] == false) { + checked[mdev->port] = true; + empty[mdev->port] = true; + dev_info(&mdev->dev, "no devices" + " to port %d\n", mdev->port); + } + return; } - return; } - maple_clean_submap(mdev); + /* Some hardware devices generate false detach messages on unit 0 */ + atomic_set(&mdev->busy, 0); } /* preprocess hotplugs or scans */ @@ -599,8 +586,11 @@ static void maple_response_devinfo(struct maple_device *mdev, } else { if (mdev->unit != 0) maple_attach_driver(mdev); + if (mdev->unit == 0) { + empty[mdev->port] = false; + maple_attach_driver(mdev); + } } - return; } if (mdev->unit == 0) { submask = recvbuf[2] & 0x1F; @@ -611,6 +601,17 @@ static void maple_response_devinfo(struct maple_device *mdev, } } +static void maple_response_fileerr(struct maple_device *mdev, void *recvbuf) +{ + if (mdev->fileerr_handler) { + mdev->fileerr_handler(mdev, recvbuf); + return; + } else + dev_warn(&mdev->dev, "device at (%d, %d) reports" + "file error 0x%X\n", mdev->port, mdev->unit, + ((int *)recvbuf)[1]); +} + static void maple_port_rescan(void) { int i; @@ -621,12 +622,6 @@ static void maple_port_rescan(void) if (checked[i] == false) { fullscan = 0; mdev = baseunits[i]; - /* - * test lock in case scan has failed - * but device is still locked - */ - if (mutex_is_locked(&mdev->mq->mutex)) - mutex_unlock(&mdev->mq->mutex); maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO, 0, NULL); } @@ -637,7 +632,7 @@ static void maple_port_rescan(void) static void maple_dma_handler(struct work_struct *work) { struct mapleq *mq, *nmq; - struct maple_device *dev; + struct maple_device *mdev; char *recvbuf; enum maple_code code; @@ -646,43 +641,56 @@ static void maple_dma_handler(struct work_struct *work) ctrl_outl(0, MAPLE_ENABLE); if (!list_empty(&maple_sentq)) { list_for_each_entry_safe(mq, nmq, &maple_sentq, list) { - recvbuf = mq->recvbuf; + mdev = mq->dev; + recvbuf = mq->recvbuf->buf; + dma_cache_sync(&mdev->dev, recvbuf, 0x400, + DMA_FROM_DEVICE); code = recvbuf[0]; - dev = mq->dev; kfree(mq->sendbuf); - mutex_unlock(&mq->mutex); list_del_init(&mq->list); - switch (code) { case MAPLE_RESPONSE_NONE: - maple_response_none(dev, mq); + maple_response_none(mdev); break; case MAPLE_RESPONSE_DEVINFO: - maple_response_devinfo(dev, recvbuf); + maple_response_devinfo(mdev, recvbuf); + atomic_set(&mdev->busy, 0); break; case MAPLE_RESPONSE_DATATRF: - if (dev->callback) - dev->callback(mq); + if (mdev->callback) + mdev->callback(mq); + atomic_set(&mdev->busy, 0); + wake_up(&mdev->maple_wait); break; case MAPLE_RESPONSE_FILEERR: + maple_response_fileerr(mdev, recvbuf); + atomic_set(&mdev->busy, 0); + wake_up(&mdev->maple_wait); + break; + case MAPLE_RESPONSE_AGAIN: case MAPLE_RESPONSE_BADCMD: case MAPLE_RESPONSE_BADFUNC: - printk(KERN_DEBUG - "Maple non-fatal error 0x%X\n", - code); + dev_warn(&mdev->dev, "non-fatal error" + " 0x%X at (%d, %d)\n", code, + mdev->port, mdev->unit); + atomic_set(&mdev->busy, 0); break; case MAPLE_RESPONSE_ALLINFO: - printk(KERN_DEBUG - "Maple - extended device information" - " not supported\n"); + dev_notice(&mdev->dev, "extended" + " device information request for (%d, %d)" + " but call is not supported\n", mdev->port, + mdev->unit); + atomic_set(&mdev->busy, 0); break; case MAPLE_RESPONSE_OK: + atomic_set(&mdev->busy, 0); + wake_up(&mdev->maple_wait); break; default: @@ -699,20 +707,19 @@ static void maple_dma_handler(struct work_struct *work) if (!fullscan) maple_port_rescan(); /* mark that we have been through the first scan */ - if (started == 0) - started = 1; + started = 1; } - maplebus_dma_reset(); + maple_send(); } -static irqreturn_t maplebus_dma_interrupt(int irq, void *dev_id) +static irqreturn_t maple_dma_interrupt(int irq, void *dev_id) { /* Load everything into the bottom half */ schedule_work(&maple_dma_process); return IRQ_HANDLED; } -static irqreturn_t maplebus_vblank_interrupt(int irq, void *dev_id) +static irqreturn_t maple_vblank_interrupt(int irq, void *dev_id) { schedule_work(&maple_vblank_process); return IRQ_HANDLED; @@ -720,14 +727,14 @@ static irqreturn_t maplebus_vblank_interrupt(int irq, void *dev_id) static int maple_set_dma_interrupt_handler(void) { - return request_irq(HW_EVENT_MAPLE_DMA, maplebus_dma_interrupt, - IRQF_SHARED, "maple bus DMA", &maple_dummy_driver); + return request_irq(HW_EVENT_MAPLE_DMA, maple_dma_interrupt, + IRQF_SHARED, "maple bus DMA", &maple_unsupported_device); } static int maple_set_vblank_interrupt_handler(void) { - return request_irq(HW_EVENT_VSYNC, maplebus_vblank_interrupt, - IRQF_SHARED, "maple bus VBLANK", &maple_dummy_driver); + return request_irq(HW_EVENT_VSYNC, maple_vblank_interrupt, + IRQF_SHARED, "maple bus VBLANK", &maple_unsupported_device); } static int maple_get_dma_buffer(void) @@ -740,7 +747,7 @@ static int maple_get_dma_buffer(void) return 0; } -static int match_maple_bus_driver(struct device *devptr, +static int maple_match_bus_driver(struct device *devptr, struct device_driver *drvptr) { struct maple_driver *maple_drv = to_maple_driver(drvptr); @@ -765,16 +772,18 @@ static void maple_bus_release(struct device *dev) { } -static struct maple_driver maple_dummy_driver = { +static struct maple_driver maple_unsupported_device = { .drv = { - .name = "maple_dummy_driver", + .name = "maple_unsupported_device", .bus = &maple_bus_type, }, }; - +/** + * maple_bus_type - core maple bus structure + */ struct bus_type maple_bus_type = { .name = "maple", - .match = match_maple_bus_driver, + .match = maple_match_bus_driver, .uevent = maple_bus_uevent, }; EXPORT_SYMBOL_GPL(maple_bus_type); @@ -788,7 +797,8 @@ static int __init maple_bus_init(void) { int retval, i; struct maple_device *mdev[MAPLE_PORTS]; - ctrl_outl(0, MAPLE_STATE); + + ctrl_outl(0, MAPLE_ENABLE); retval = device_register(&maple_bus); if (retval) @@ -798,36 +808,33 @@ static int __init maple_bus_init(void) if (retval) goto cleanup_device; - retval = driver_register(&maple_dummy_driver.drv); + retval = driver_register(&maple_unsupported_device.drv); if (retval) goto cleanup_bus; /* allocate memory for maple bus dma */ retval = maple_get_dma_buffer(); if (retval) { - printk(KERN_INFO - "Maple bus: Failed to allocate Maple DMA buffers\n"); + dev_err(&maple_bus, "failed to allocate DMA buffers\n"); goto cleanup_basic; } /* set up DMA interrupt handler */ retval = maple_set_dma_interrupt_handler(); if (retval) { - printk(KERN_INFO - "Maple bus: Failed to grab maple DMA IRQ\n"); + dev_err(&maple_bus, "bus failed to grab maple " + "DMA IRQ\n"); goto cleanup_dma; } /* set up VBLANK interrupt handler */ retval = maple_set_vblank_interrupt_handler(); if (retval) { - printk(KERN_INFO "Maple bus: Failed to grab VBLANK IRQ\n"); + dev_err(&maple_bus, "bus failed to grab VBLANK IRQ\n"); goto cleanup_irq; } - maple_queue_cache = - kmem_cache_create("maple_queue_cache", 0x400, 0, - SLAB_HWCACHE_ALIGN, NULL); + maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN); if (!maple_queue_cache) goto cleanup_bothirqs; @@ -838,23 +845,23 @@ static int __init maple_bus_init(void) /* setup maple ports */ for (i = 0; i < MAPLE_PORTS; i++) { checked[i] = false; + empty[i] = false; mdev[i] = maple_alloc_dev(i, 0); - baseunits[i] = mdev[i]; if (!mdev[i]) { while (i-- > 0) maple_free_dev(mdev[i]); goto cleanup_cache; } + baseunits[i] = mdev[i]; + atomic_set(&mdev[i]->busy, 1); maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL); subdevice_map[i] = 0; } - /* setup maplebus hardware */ - maplebus_dma_reset(); - /* initial detection */ + maple_pnp_time = jiffies + HZ; + /* prepare initial queue */ maple_send(); - maple_pnp_time = jiffies; - printk(KERN_INFO "Maple bus core now registered.\n"); + dev_info(&maple_bus, "bus core now registered\n"); return 0; @@ -871,7 +878,7 @@ cleanup_dma: free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES); cleanup_basic: - driver_unregister(&maple_dummy_driver.drv); + driver_unregister(&maple_unsupported_device.drv); cleanup_bus: bus_unregister(&maple_bus_type); @@ -880,7 +887,7 @@ cleanup_device: device_unregister(&maple_bus); cleanup: - printk(KERN_INFO "Maple bus registration failed\n"); + printk(KERN_ERR "Maple bus registration failed\n"); return retval; } /* Push init to later to ensure hardware gets detected */ diff --git a/include/linux/maple.h b/include/linux/maple.h index c23d3f51ba40..d9a51b9b3300 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -8,33 +8,49 @@ extern struct bus_type maple_bus_type; /* Maple Bus command and response codes */ enum maple_code { - MAPLE_RESPONSE_FILEERR = -5, - MAPLE_RESPONSE_AGAIN = -4, /* request should be retransmitted */ - MAPLE_RESPONSE_BADCMD = -3, - MAPLE_RESPONSE_BADFUNC = -2, - MAPLE_RESPONSE_NONE = -1, /* unit didn't respond at all */ - MAPLE_COMMAND_DEVINFO = 1, - MAPLE_COMMAND_ALLINFO = 2, - MAPLE_COMMAND_RESET = 3, - MAPLE_COMMAND_KILL = 4, - MAPLE_RESPONSE_DEVINFO = 5, - MAPLE_RESPONSE_ALLINFO = 6, - MAPLE_RESPONSE_OK = 7, - MAPLE_RESPONSE_DATATRF = 8, - MAPLE_COMMAND_GETCOND = 9, - MAPLE_COMMAND_GETMINFO = 10, - MAPLE_COMMAND_BREAD = 11, - MAPLE_COMMAND_BWRITE = 12, - MAPLE_COMMAND_SETCOND = 14 + MAPLE_RESPONSE_FILEERR = -5, + MAPLE_RESPONSE_AGAIN, /* retransmit */ + MAPLE_RESPONSE_BADCMD, + MAPLE_RESPONSE_BADFUNC, + MAPLE_RESPONSE_NONE, /* unit didn't respond*/ + MAPLE_COMMAND_DEVINFO = 1, + MAPLE_COMMAND_ALLINFO, + MAPLE_COMMAND_RESET, + MAPLE_COMMAND_KILL, + MAPLE_RESPONSE_DEVINFO, + MAPLE_RESPONSE_ALLINFO, + MAPLE_RESPONSE_OK, + MAPLE_RESPONSE_DATATRF, + MAPLE_COMMAND_GETCOND, + MAPLE_COMMAND_GETMINFO, + MAPLE_COMMAND_BREAD, + MAPLE_COMMAND_BWRITE, + MAPLE_COMMAND_BSYNC, + MAPLE_COMMAND_SETCOND, + MAPLE_COMMAND_MICCONTROL +}; + +enum maple_file_errors { + MAPLE_FILEERR_INVALID_PARTITION = 0x01000000, + MAPLE_FILEERR_PHASE_ERROR = 0x02000000, + MAPLE_FILEERR_INVALID_BLOCK = 0x04000000, + MAPLE_FILEERR_WRITE_ERROR = 0x08000000, + MAPLE_FILEERR_INVALID_WRITE_LENGTH = 0x10000000, + MAPLE_FILEERR_BAD_CRC = 0x20000000 +}; + +struct maple_buffer { + char bufx[0x400]; + void *buf; }; struct mapleq { struct list_head list; struct maple_device *dev; - void *sendbuf, *recvbuf, *recvbufdcsp; + struct maple_buffer *recvbuf; + void *sendbuf, *recvbuf_p2; unsigned char length; enum maple_code command; - struct mutex mutex; }; struct maple_devinfo { @@ -52,11 +68,15 @@ struct maple_device { struct maple_driver *driver; struct mapleq *mq; void (*callback) (struct mapleq * mq); + void (*fileerr_handler)(struct maple_device *mdev, void *recvbuf); + int (*can_unload)(struct maple_device *mdev); unsigned long when, interval, function; struct maple_devinfo devinfo; unsigned char port, unit; char product_name[32]; char product_licence[64]; + atomic_t busy; + wait_queue_head_t maple_wait; struct device dev; }; @@ -72,7 +92,7 @@ void maple_getcond_callback(struct maple_device *dev, int maple_driver_register(struct maple_driver *); void maple_driver_unregister(struct maple_driver *); -int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, +int maple_add_packet(struct maple_device *mdev, u32 function, u32 command, u32 length, void *data); void maple_clear_dev(struct maple_device *mdev); -- cgit v1.2.3 From 1d015cf02a1fd46385c03cf3ce8958dbea705dd3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 23 Feb 2009 07:14:02 +0000 Subject: sh: shared register saving code for sh3/sh4/sh4a This patch reworks the sh3/sh4/sh4a register saving code in the following ways: - break out prepare_stack_save_dsp() from handle_exception() - break out save_regs() from handle_exception() - the register saving order is unchanged - align new functions to fit in cache lines - separate exception code from interrupt code - keep main code flow in a single cache line per exception vector - use bsr/rts for regular functions (save pr first) - keep data in one shared cache line (exception_data) - document the functions - tie in the hp6xx code Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-hp6xx/pm_wakeup.S | 31 +--- arch/sh/kernel/cpu/sh3/entry.S | 273 ++++++++++++++++++---------------- 2 files changed, 155 insertions(+), 149 deletions(-) diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S index 44b648cf6f23..4f18d44e0541 100644 --- a/arch/sh/boards/mach-hp6xx/pm_wakeup.S +++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S @@ -10,47 +10,32 @@ #include #include -#define k0 r0 -#define k1 r1 -#define k2 r2 -#define k3 r3 -#define k4 r4 - /* * Kernel mode register usage: * k0 scratch * k1 scratch - * k2 scratch (Exception code) - * k3 scratch (Return address) - * k4 scratch - * k5 reserved - * k6 Global Interrupt Mask (0--15 << 4) - * k7 CURRENT_THREAD_INFO (pointer to current thread info) + * For more details, please have a look at entry.S */ +#define k0 r0 +#define k1 r1 + ENTRY(wakeup_start) ! clear STBY bit - mov #-126, k2 + mov #-126, k1 and #127, k0 - mov.b k0, @k2 + mov.b k0, @k1 ! enable refresh mov.l 5f, k1 mov.w 6f, k0 mov.w k0, @k1 ! jump to handler - mov.l 2f, k2 - mov.l 3f, k3 - mov.l @k2, k2 - mov.l 4f, k1 jmp @k1 - nop + nop .align 2 -1: .long EXPEVT -2: .long INTEVT -3: .long ret_from_irq -4: .long handle_exception +4: .long handle_interrupt 5: .long 0xffffff68 6: .word 0x0524 diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index b4106d0c68ec..f3db143e70b2 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -16,6 +16,7 @@ #include #include #include +#include ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -294,7 +295,7 @@ skip_restore: mov #0xf0, k1 extu.b k1, k1 not k1, k1 - and k1, k2 ! Mask orignal SR value + and k1, k2 ! Mask original SR value ! mov k3, k0 ! Calculate IMASK-bits shlr2 k0 @@ -335,82 +336,54 @@ skip_restore: .balign 4096,0,4096 ENTRY(vbr_base) .long 0 +! +! 0x100: General exception vector ! .balign 256,0,256 general_exception: - mov.l 1f, k2 - mov.l 2f, k3 -#ifdef CONFIG_CPU_SUBTYPE_SHX3 - mov.l @k2, k2 +#ifndef CONFIG_CPU_SUBTYPE_SHX3 + bra handle_exception + sts pr, k3 ! save original pr value in k3 +#else + mov.l 1f, k4 + mov.l @k4, k4 ! Is EXPEVT larger than 0x800? mov #0x8, k0 shll8 k0 - cmp/hs k0, k2 + cmp/hs k0, k4 bf 0f ! then add 0x580 (k2 is 0xd80 or 0xda0) mov #0x58, k0 shll2 k0 shll2 k0 - add k0, k2 + add k0, k4 0: - bra handle_exception + ! Setup stack and save DSP context (k0 contains original r15 on return) + bsr prepare_stack_save_dsp nop -#else - bra handle_exception - mov.l @k2, k2 -#endif - .align 2 -1: .long EXPEVT -2: .long ret_from_exception -! -! - .balign 1024,0,1024 -tlb_miss: - mov.l 1f, k2 - mov.l 4f, k3 - bra handle_exception - mov.l @k2, k2 -! - .balign 512,0,512 -interrupt: - mov.l 3f, k3 -#if defined(CONFIG_KGDB) - mov.l 2f, k2 - ! Debounce (filter nested NMI) - mov.l @k2, k0 - mov.l 5f, k1 - cmp/eq k1, k0 - bf 0f - mov.l 6f, k1 - tas.b @k1 - bt 0f - rte + ! Save registers / Switch to bank 0 + bsr save_regs ! needs original pr value in k3 + mov.l k4, k2 ! keep vector in k2 + + bra handle_exception_special nop - .align 2 -2: .long INTEVT -5: .long NMI_VEC -6: .long in_nmi -0: -#endif /* defined(CONFIG_KGDB) */ - bra handle_exception - mov #-1, k2 ! interrupt exception marker .align 2 1: .long EXPEVT -3: .long ret_from_irq -4: .long ret_from_exception +#endif -! -! - .align 2 -ENTRY(handle_exception) - ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), - ! save all registers onto stack. - ! +! prepare_stack_save_dsp() +! - roll back gRB +! - switch to kernel stack +! - save DSP +! k0 returns original sp (after roll back) +! k1 trashed +! k2 trashed +prepare_stack_save_dsp: #ifdef CONFIG_GUSA ! Check for roll back gRB (User and Kernel) mov r15, k0 @@ -430,7 +403,7 @@ ENTRY(handle_exception) 2: mov k1, r15 ! SP = r1 1: #endif - + ! Switch to kernel stack if needed stc ssr, k0 ! Is it from kernel space? shll k0 ! Check MD bit (bit30) by shifting it into... shll k0 ! ...the T bit @@ -443,18 +416,17 @@ ENTRY(handle_exception) add current, k1 mov k1, r15 ! change to kernel stack ! -1: mov.l 2f, k1 - ! +1: #ifdef CONFIG_SH_DSP - mov.l r2, @-r15 ! Save r2, we need another reg - stc sr, k4 - mov.l 1f, r2 - tst r2, k4 ! Check if in DSP mode - mov.l @r15+, r2 ! Restore r2 now + ! Save DSP context if needed + stc sr, k1 + mov #0x10, k2 + shll8 k2 ! DSP=1 (0x00001000) + tst k2, k1 ! Check if in DSP mode (passed in k2) bt/s skip_save - mov #0, k4 ! Set marker for no stack frame + mov #0, k1 ! Set marker for no stack frame - mov r2, k4 ! Backup r2 (in k4) for later + mov k2, k1 ! Save has-frame marker ! Save DSP registers on stack stc.l mod, @-r15 @@ -473,35 +445,73 @@ ENTRY(handle_exception) ! as we're not at all interested in supporting ancient toolchains at ! this point. -- PFM. - mov r15, r2 + mov r15, k2 .word 0xf653 ! movs.l a1, @-r2 .word 0xf6f3 ! movs.l a0g, @-r2 .word 0xf6d3 ! movs.l a1g, @-r2 .word 0xf6c3 ! movs.l m0, @-r2 .word 0xf6e3 ! movs.l m1, @-r2 - mov r2, r15 + mov k2, r15 - mov k4, r2 ! Restore r2 - mov.l 1f, k4 ! Force DSP stack frame skip_save: - mov.l k4, @-r15 ! Push DSP mode marker onto stack + mov.l k1, @-r15 ! Push DSP mode marker onto stack #endif - ! Save the user registers on the stack. - mov.l k2, @-r15 ! EXPEVT + rts + nop +! +! 0x400: Instruction and Data TLB miss exception vector +! + .balign 1024,0,1024 +tlb_miss: + sts pr, k3 ! save original pr value in k3 - mov #-1, k4 - mov.l k4, @-r15 ! set TRA (default: -1) - ! +handle_exception: + ! Setup stack and save DSP context (k0 contains original r15 on return) + bsr prepare_stack_save_dsp + nop + + ! Save registers / Switch to bank 0 + mov.l 5f, k2 ! vector register address + bsr save_regs ! needs original pr value in k3 + mov.l @k2, k2 ! read out vector and keep in k2 + +handle_exception_special: + ! Setup return address and jump to exception handler + mov.l 7f, r9 ! fetch return address + stc r2_bank, r0 ! k2 (vector) + mov.l 6f, r10 + shlr2 r0 + shlr r0 + mov.l @(r0, r10), r10 + jmp @r10 + lds r9, pr ! put return address in pr + + .align L1_CACHE_SHIFT + +! save_regs() +! - save vector, default tra, macl, mach, gbr, ssr, pr* and spc on the stack +! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack +! - switch bank +! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack +! k0 contains original stack pointer* +! k1 trashed +! k2 passes vector (EXPEVT) +! k3 passes original pr* +! k4 trashed +! BL=1 on entry, on exit BL=0. + +save_regs: + mov #-1, r1 + mov.l k2, @-r15 ! vector in k2 + mov.l k1, @-r15 ! set TRA (default: -1) sts.l macl, @-r15 sts.l mach, @-r15 stc.l gbr, @-r15 stc.l ssr, @-r15 - sts.l pr, @-r15 + mov.l k3, @-r15 ! original pr in k3 stc.l spc, @-r15 - ! - lds k3, pr ! Set the return address to pr - ! - mov.l k0, @-r15 ! save orignal stack + + mov.l k0, @-r15 ! original stack pointer in k0 mov.l r14, @-r15 mov.l r13, @-r15 mov.l r12, @-r15 @@ -509,13 +519,15 @@ skip_save: mov.l r10, @-r15 mov.l r9, @-r15 mov.l r8, @-r15 - ! - stc sr, r8 ! Back to normal register bank, and - or k1, r8 ! Block all interrupts - mov.l 3f, k1 - and k1, r8 ! ... - ldc r8, sr ! ...changed here. - ! + + mov.l 0f, k3 ! SR bits to set in k3 + mov.l 1f, k4 ! SR bits to clear in k4 + + stc sr, r8 + or k3, r8 + and k4, r8 + ldc r8, sr + mov.l r7, @-r15 mov.l r6, @-r15 mov.l r5, @-r15 @@ -523,52 +535,61 @@ skip_save: mov.l r3, @-r15 mov.l r2, @-r15 mov.l r1, @-r15 - mov.l r0, @-r15 - - /* - * This gets a bit tricky.. in the INTEVT case we don't want to use - * the VBR offset as a destination in the jump call table, since all - * of the destinations are the same. In this case, (interrupt) sets - * a marker in r2 (now r2_bank since SR.RB changed), which we check - * to determine the exception type. For all other exceptions, we - * forcibly read EXPEVT from memory and fix up the jump address, in - * the interrupt exception case we jump to do_IRQ() and defer the - * INTEVT read until there. As a bonus, we can also clean up the SR.RB - * checks that do_IRQ() was doing.. - */ - stc r2_bank, r8 - cmp/pz r8 - bf interrupt_exception - shlr2 r8 - shlr r8 - mov.l 4f, r9 - add r8, r9 - mov.l @r9, r9 - jmp @r9 - nop rts - nop + mov.l r0, @-r15 +! +! 0x600: Interrupt / NMI vector +! + .balign 512,0,512 +ENTRY(handle_interrupt) +#if defined(CONFIG_KGDB) + mov.l 2f, k2 + ! Debounce (filter nested NMI) + mov.l @k2, k0 + mov.l 9f, k1 + cmp/eq k1, k0 + bf 11f + mov.l 10f, k1 + tas.b @k1 + bt 11f + rte + nop .align 2 -1: .long 0x00001000 ! DSP=1 -2: .long 0x000080f0 ! FD=1, IMASK=15 -3: .long 0xcfffffff ! RB=0, BL=0 -4: .long exception_handling_table +9: .long NMI_VEC +10: .long in_nmi +11: +#endif /* defined(CONFIG_KGDB) */ + sts pr, k3 ! save original pr value in k3 -interrupt_exception: - mov.l 1f, r9 - mov.l 2f, r4 - mov.l @r4, r4 - jmp @r9 - mov r15, r5 - rts + ! Setup stack and save DSP context (k0 contains original r15 on return) + bsr prepare_stack_save_dsp nop - .align 2 -1: .long do_IRQ -2: .long INTEVT + ! Save registers / Switch to bank 0 + bsr save_regs ! needs original pr value in k3 + mov #-1, k2 ! default vector kept in k2 + + ! Setup return address and jump to do_IRQ + mov.l 4f, r9 ! fetch return address + lds r9, pr ! put return address in pr + mov.l 2f, r4 + mov.l 3f, r9 + mov.l @r4, r4 ! pass INTEVT vector as arg0 + jmp @r9 + mov r15, r5 ! pass saved registers as arg1 - .align 2 ENTRY(exception_none) rts nop + + .align L1_CACHE_SHIFT +exception_data: +0: .long 0x000080f0 ! FD=1, IMASK=15 +1: .long 0xcfffffff ! RB=0, BL=0 +2: .long INTEVT +3: .long do_IRQ +4: .long ret_from_irq +5: .long EXPEVT +6: .long exception_handling_table +7: .long ret_from_exception -- cgit v1.2.3 From 1dd22722f6bf9be9821657a2d59fae4d4365fb32 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 23 Feb 2009 07:15:07 +0000 Subject: sh: rework register restore code for sh3/sh4/sh4a This patch reworks the sh3/sh4/sh4a register restore code in the following ways: - break out restore_regs() from restore_all() - the register saving order is unchanged - use restore_regs() in sh_bios_handler and restore_all - document the function Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/entry.S | 68 ++++++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 35 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index f3db143e70b2..cbffbffce351 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -188,44 +188,35 @@ call_dae: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ ENTRY(sh_bios_handler) - mov.l @r15+, r0 - mov.l @r15+, r1 - mov.l @r15+, r2 - mov.l @r15+, r3 - mov.l @r15+, r4 - mov.l @r15+, r5 - mov.l @r15+, r6 - mov.l @r15+, r7 - stc sr, r8 - mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F - or r9, r8 - ldc r8, sr ! here, change the register bank - mov.l @r15+, r8 - mov.l @r15+, r9 - mov.l @r15+, r10 - mov.l @r15+, r11 - mov.l @r15+, r12 - mov.l @r15+, r13 - mov.l @r15+, r14 - mov.l @r15+, k0 - ldc.l @r15+, spc - lds.l @r15+, pr - mov.l @r15+, k1 - ldc.l @r15+, gbr - lds.l @r15+, mach - lds.l @r15+, macl - mov k0, r15 + mov.l 1f, r8 + bsr restore_regs + nop + + lds k2, pr ! restore pr + mov k4, r15 ! mov.l 2f, k0 mov.l @k0, k0 jmp @k0 - ldc k1, ssr + ldc k3, ssr .align 2 1: .long 0x300000f0 2: .long gdb_vbr_vector #endif /* CONFIG_SH_STANDARD_BIOS */ -restore_all: +! restore_regs() +! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack +! - switch bank +! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack +! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra +! k2 returns original pr +! k3 returns original sr +! k4 returns original stack pointer +! r8 passes SR bitmask, overwritten with restored data on return +! r9 trashed +! BL=0 on entry, on exit BL=1 (depending on r8). + +restore_regs: mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 @@ -235,10 +226,9 @@ restore_all: mov.l @r15+, r6 mov.l @r15+, r7 ! - stc sr, r8 - mov.l 7f, r9 - or r9, r8 ! BL =1, RB=1 - ldc r8, sr ! here, change the register bank + stc sr, r9 + or r8, r9 + ldc r9, sr ! mov.l @r15+, r8 mov.l @r15+, r9 @@ -249,12 +239,20 @@ restore_all: mov.l @r15+, r14 mov.l @r15+, k4 ! original stack pointer ldc.l @r15+, spc - lds.l @r15+, pr + mov.l @r15+, k2 ! original PR mov.l @r15+, k3 ! original SR ldc.l @r15+, gbr lds.l @r15+, mach lds.l @r15+, macl - add #4, r15 ! Skip syscall number + rts + add #4, r15 ! Skip syscall number + +restore_all: + mov.l 7f, r8 + bsr restore_regs + nop + + lds k2, pr ! restore pr ! #ifdef CONFIG_SH_DSP mov.l @r15+, k0 ! DSP mode marker -- cgit v1.2.3 From 4f099ebb27211d378304ddcfa507097f5128f5b9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 23 Feb 2009 07:16:34 +0000 Subject: sh: remove EXPEVT vector from stack on sh3/sh4/sh4a Remove EXPEVT vector from the stack, lookup_exception_vector() for sh3/sh4/sh4a is already using k2 to get the vector. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 8 +++----- arch/sh/kernel/cpu/sh3/entry.S | 5 +---- 2 files changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 12912ab80c15..81c6568fdb3e 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -122,14 +122,12 @@ extern void user_disable_single_step(struct task_struct *); #ifdef CONFIG_SH_DSP #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) + - sizeof(struct pt_dspregs)) - 1) #define task_pt_dspregs(task) \ - ((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(unsigned long)) - 1) + ((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE) - 1) #else #define task_pt_regs(task) \ - ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(unsigned long)) - 1) + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1) #endif static inline unsigned long profile_pc(struct pt_regs *regs) diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index cbffbffce351..0271fe08de27 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -312,7 +312,6 @@ skip_restore: mov #0, k1 mov.b k1, @k0 #endif - mov.l @r15+, k2 ! restore EXPEVT mov k4, r15 rte nop @@ -487,20 +486,18 @@ handle_exception_special: .align L1_CACHE_SHIFT ! save_regs() -! - save vector, default tra, macl, mach, gbr, ssr, pr* and spc on the stack +! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack ! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack ! - switch bank ! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack ! k0 contains original stack pointer* ! k1 trashed -! k2 passes vector (EXPEVT) ! k3 passes original pr* ! k4 trashed ! BL=1 on entry, on exit BL=0. save_regs: mov #-1, r1 - mov.l k2, @-r15 ! vector in k2 mov.l k1, @-r15 ! set TRA (default: -1) sts.l macl, @-r15 sts.l mach, @-r15 -- cgit v1.2.3 From 0197f21ca5c5ed0df2a14a60ef073e8163e6533b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 27 Feb 2009 16:41:17 +0900 Subject: sh: prefetch early exception data on sh4/sh4a. Prefetch early exception data. There is unused space in our exception handler cache line anyway, so this is almost free. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/entry-macros.S | 5 +++++ arch/sh/kernel/cpu/sh3/entry.S | 7 +++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S index 2dab0b8d9454..3a4752a65722 100644 --- a/arch/sh/include/asm/entry-macros.S +++ b/arch/sh/include/asm/entry-macros.S @@ -31,3 +31,8 @@ #endif .endm +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4) +# define PREF(x) pref @x +#else +# define PREF(x) nop +#endif diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 0271fe08de27..e984e94394ec 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -463,9 +463,11 @@ tlb_miss: sts pr, k3 ! save original pr value in k3 handle_exception: + mova exception_data, k0 + ! Setup stack and save DSP context (k0 contains original r15 on return) bsr prepare_stack_save_dsp - nop + PREF(k0) ! Save registers / Switch to bank 0 mov.l 5f, k2 ! vector register address @@ -556,10 +558,11 @@ ENTRY(handle_interrupt) 11: #endif /* defined(CONFIG_KGDB) */ sts pr, k3 ! save original pr value in k3 + mova exception_data, k0 ! Setup stack and save DSP context (k0 contains original r15 on return) bsr prepare_stack_save_dsp - nop + PREF(k0) ! Save registers / Switch to bank 0 bsr save_regs ! needs original pr value in k3 -- cgit v1.2.3 From a73090ffaf0f6853880d9ac3fff7e5d88215131a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 27 Feb 2009 16:42:05 +0900 Subject: sh: Disable unsupportable prefetching on SH-3. The SH-3 does not support 'pref'-based prefetching, only SH-2A and SH-4A parts do. Remove SH-3 from the list. Signed-off-by: Paul Mundt --- arch/sh/include/asm/processor_32.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index dcaed24c71fc..efdd78a53b11 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -191,8 +191,7 @@ extern unsigned long get_wchan(struct task_struct *p); #define user_stack_pointer(_regs) ((_regs)->regs[15]) -#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4) #define PREFETCH_STRIDE L1_CACHE_BYTES #define ARCH_HAS_PREFETCH #define ARCH_HAS_PREFETCHW -- cgit v1.2.3 From 973e5d525d39be6f9f6c38d37aacf03efda02e60 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 15:57:12 +0900 Subject: serial: sh-sci: console drainage Modify the serial console code to wait for the transmit FIFO, make sure all bits have been put on the wire before returning. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 557b54ab2f25..d3ccce0bfd44 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -139,7 +139,7 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } while (!(status & SCxSR_TDxE(port))); sci_in(port, SCxSR); /* Dummy read */ - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); sci_out(port, SCxTDR, c); } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -1095,6 +1095,7 @@ static void serial_console_write(struct console *co, const char *s, unsigned count) { struct uart_port *port = &serial_console_port->port; + unsigned short bits; int i; for (i = 0; i < count; i++) { @@ -1103,6 +1104,11 @@ static void serial_console_write(struct console *co, const char *s, sci_poll_put_char(port, *s++); } + + /* wait until fifo is empty and last bit has been transmitted */ + bits = SCxSR_TDxE(port) | SCxSR_TEND(port); + while ((sci_in(port, SCxSR) & bits) != bits) + cpu_relax(); } static int __init serial_console_setup(struct console *co, char *options) -- cgit v1.2.3 From 5e084a1586a864d4e9b3f2edbb1bd3429909d652 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 22:11:03 +0900 Subject: rtc: sh-rtc: Add Single IRQ Support Add support for single IRQ hardware to the sh-rtc driver. This is useful for processors with limited interrupt masking support such as sh7750 and sh7780. With this patch in place we can add logic to the intc code that merges all RTC vectors into a single linux interrupt with proper masking/unmasking support. Specify a single IRQ in the platform data to use this new shared IRQ feature. Separate Periodic/Carry/Alarm IRQs are still supported. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/rtc/rtc-sh.c | 190 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 117 insertions(+), 73 deletions(-) diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 1c3fc6b428e9..b37f44b0406e 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -99,56 +99,51 @@ struct sh_rtc { unsigned short periodic_freq; }; -static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id) +static int __sh_rtc_interrupt(struct sh_rtc *rtc) { - struct sh_rtc *rtc = dev_id; - unsigned int tmp; - - spin_lock(&rtc->lock); + unsigned int tmp, pending; tmp = readb(rtc->regbase + RCR1); + pending = tmp & RCR1_CF; tmp &= ~RCR1_CF; writeb(tmp, rtc->regbase + RCR1); /* Users have requested One x Second IRQ */ - if (rtc->periodic_freq & PF_OXS) + if (pending && rtc->periodic_freq & PF_OXS) rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF); - spin_unlock(&rtc->lock); - - return IRQ_HANDLED; + return pending; } -static irqreturn_t sh_rtc_alarm(int irq, void *dev_id) +static int __sh_rtc_alarm(struct sh_rtc *rtc) { - struct sh_rtc *rtc = dev_id; - unsigned int tmp; - - spin_lock(&rtc->lock); + unsigned int tmp, pending; tmp = readb(rtc->regbase + RCR1); + pending = tmp & RCR1_AF; tmp &= ~(RCR1_AF | RCR1_AIE); - writeb(tmp, rtc->regbase + RCR1); - - rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF); + writeb(tmp, rtc->regbase + RCR1); - spin_unlock(&rtc->lock); + if (pending) + rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF); - return IRQ_HANDLED; + return pending; } -static irqreturn_t sh_rtc_periodic(int irq, void *dev_id) +static int __sh_rtc_periodic(struct sh_rtc *rtc) { - struct sh_rtc *rtc = dev_id; struct rtc_device *rtc_dev = rtc->rtc_dev; - unsigned int tmp; - - spin_lock(&rtc->lock); + struct rtc_task *irq_task; + unsigned int tmp, pending; tmp = readb(rtc->regbase + RCR2); + pending = tmp & RCR2_PEF; tmp &= ~RCR2_PEF; writeb(tmp, rtc->regbase + RCR2); + if (!pending) + return 0; + /* Half period enabled than one skipped and the next notified */ if ((rtc->periodic_freq & PF_HP) && (rtc->periodic_freq & PF_COUNT)) rtc->periodic_freq &= ~PF_COUNT; @@ -157,16 +152,65 @@ static irqreturn_t sh_rtc_periodic(int irq, void *dev_id) rtc->periodic_freq |= PF_COUNT; if (rtc->periodic_freq & PF_KOU) { spin_lock(&rtc_dev->irq_task_lock); - if (rtc_dev->irq_task) - rtc_dev->irq_task->func(rtc_dev->irq_task->private_data); + irq_task = rtc_dev->irq_task; + if (irq_task) + irq_task->func(irq_task->private_data); spin_unlock(&rtc_dev->irq_task_lock); } else rtc_update_irq(rtc->rtc_dev, 1, RTC_PF | RTC_IRQF); } + return pending; +} + +static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id) +{ + struct sh_rtc *rtc = dev_id; + int ret; + + spin_lock(&rtc->lock); + ret = __sh_rtc_interrupt(rtc); + spin_unlock(&rtc->lock); + + return IRQ_RETVAL(ret); +} + +static irqreturn_t sh_rtc_alarm(int irq, void *dev_id) +{ + struct sh_rtc *rtc = dev_id; + int ret; + + spin_lock(&rtc->lock); + ret = __sh_rtc_alarm(rtc); + spin_unlock(&rtc->lock); + + return IRQ_RETVAL(ret); +} + +static irqreturn_t sh_rtc_periodic(int irq, void *dev_id) +{ + struct sh_rtc *rtc = dev_id; + int ret; + + spin_lock(&rtc->lock); + ret = __sh_rtc_periodic(rtc); spin_unlock(&rtc->lock); - return IRQ_HANDLED; + return IRQ_RETVAL(ret); +} + +static irqreturn_t sh_rtc_shared(int irq, void *dev_id) +{ + struct sh_rtc *rtc = dev_id; + int ret; + + spin_lock(&rtc->lock); + ret = __sh_rtc_interrupt(rtc); + ret |= __sh_rtc_alarm(rtc); + ret |= __sh_rtc_periodic(rtc); + spin_unlock(&rtc->lock); + + return IRQ_RETVAL(ret); } static inline void sh_rtc_setpie(struct device *dev, unsigned int enable) @@ -585,26 +629,12 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) ret = platform_get_irq(pdev, 0); if (unlikely(ret <= 0)) { ret = -ENOENT; - dev_err(&pdev->dev, "No IRQ for period\n"); + dev_err(&pdev->dev, "No IRQ resource\n"); goto err_badres; } rtc->periodic_irq = ret; - - ret = platform_get_irq(pdev, 1); - if (unlikely(ret <= 0)) { - ret = -ENOENT; - dev_err(&pdev->dev, "No IRQ for carry\n"); - goto err_badres; - } - rtc->carry_irq = ret; - - ret = platform_get_irq(pdev, 2); - if (unlikely(ret <= 0)) { - ret = -ENOENT; - dev_err(&pdev->dev, "No IRQ for alarm\n"); - goto err_badres; - } - rtc->alarm_irq = ret; + rtc->carry_irq = platform_get_irq(pdev, 1); + rtc->alarm_irq = platform_get_irq(pdev, 2); res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (unlikely(res == NULL)) { @@ -651,35 +681,47 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); - /* register periodic/carry/alarm irqs */ - ret = request_irq(rtc->periodic_irq, sh_rtc_periodic, IRQF_DISABLED, - "sh-rtc period", rtc); - if (unlikely(ret)) { - dev_err(&pdev->dev, - "request period IRQ failed with %d, IRQ %d\n", ret, - rtc->periodic_irq); - goto err_unmap; - } + if (rtc->carry_irq <= 0) { + /* register shared periodic/carry/alarm irq */ + ret = request_irq(rtc->periodic_irq, sh_rtc_shared, + IRQF_DISABLED, "sh-rtc", rtc); + if (unlikely(ret)) { + dev_err(&pdev->dev, + "request IRQ failed with %d, IRQ %d\n", ret, + rtc->periodic_irq); + goto err_unmap; + } + } else { + /* register periodic/carry/alarm irqs */ + ret = request_irq(rtc->periodic_irq, sh_rtc_periodic, + IRQF_DISABLED, "sh-rtc period", rtc); + if (unlikely(ret)) { + dev_err(&pdev->dev, + "request period IRQ failed with %d, IRQ %d\n", + ret, rtc->periodic_irq); + goto err_unmap; + } - ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED, - "sh-rtc carry", rtc); - if (unlikely(ret)) { - dev_err(&pdev->dev, - "request carry IRQ failed with %d, IRQ %d\n", ret, - rtc->carry_irq); - free_irq(rtc->periodic_irq, rtc); - goto err_unmap; - } + ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, + IRQF_DISABLED, "sh-rtc carry", rtc); + if (unlikely(ret)) { + dev_err(&pdev->dev, + "request carry IRQ failed with %d, IRQ %d\n", + ret, rtc->carry_irq); + free_irq(rtc->periodic_irq, rtc); + goto err_unmap; + } - ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED, - "sh-rtc alarm", rtc); - if (unlikely(ret)) { - dev_err(&pdev->dev, - "request alarm IRQ failed with %d, IRQ %d\n", ret, - rtc->alarm_irq); - free_irq(rtc->carry_irq, rtc); - free_irq(rtc->periodic_irq, rtc); - goto err_unmap; + ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, + IRQF_DISABLED, "sh-rtc alarm", rtc); + if (unlikely(ret)) { + dev_err(&pdev->dev, + "request alarm IRQ failed with %d, IRQ %d\n", + ret, rtc->alarm_irq); + free_irq(rtc->carry_irq, rtc); + free_irq(rtc->periodic_irq, rtc); + goto err_unmap; + } } tmp = readb(rtc->regbase + RCR1); @@ -709,9 +751,11 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev) sh_rtc_setpie(&pdev->dev, 0); sh_rtc_setaie(&pdev->dev, 0); - free_irq(rtc->carry_irq, rtc); free_irq(rtc->periodic_irq, rtc); - free_irq(rtc->alarm_irq, rtc); + if (rtc->carry_irq > 0) { + free_irq(rtc->carry_irq, rtc); + free_irq(rtc->alarm_irq, rtc); + } release_resource(rtc->res); -- cgit v1.2.3 From 3e91faec47e9e12b965c952d698b0bb64847af06 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 22:23:51 +0900 Subject: sh: fix P4 iounmap() pass-through Fix iounmap() of pass-through P4 addresses. Without this patch iounmap() on the sh7780 rtc area results in a warning message. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/ioremap_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 32946fba123e..8dc77026a0b5 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -119,7 +119,7 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || seg >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) return; #ifdef CONFIG_32BIT -- cgit v1.2.3 From bdaa6e8062d7f8085d8ed94ff88c99406ad53d79 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 22:58:57 +0900 Subject: sh: multiple vectors per irq - base Instead of keeping the single vector -> single linux irq mapping we extend the intc code to support merging of vectors to a single linux irq. This helps processors such as sh7750, sh7780 and sh7785 which have more vectors than masking ability. With this patch in place we can modify the intc tables to use one irq per maskable irq source. Please note the following: - If multiple vectors share the same enum then only the first vector will be available as a linux irq. - Drivers may need to be rewritten to get pending irq source from the hardware block instead of irq number. This patch together with the sh7785 specific intc tables solves DMA controller irq issues related to buggy interrupt masking. Reported-by: Yoshihiro Shimoda Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/irq.c | 2 +- drivers/sh/intc.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/sh_intc.h | 1 + 3 files changed, 49 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 64b7690c664c..90d63aefd275 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -106,7 +106,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) } #endif - irq = irq_demux(evt2irq(irq)); + irq = irq_demux(intc_evt2irq(irq)); #ifdef CONFIG_IRQSTACKS curctx = (union irq_ctx *)current_thread_info(); diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 58d24c5a76ce..d7b8959d9d92 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -568,6 +568,10 @@ static void __init intc_register_irq(struct intc_desc *desc, if (!data[0] && data[1]) primary = 1; + if (!data[0] && !data[1]) + pr_warning("intc: missing unique irq mask for 0x%04x\n", + irq2evt(irq)); + data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1); data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1); @@ -641,6 +645,17 @@ static unsigned int __init save_reg(struct intc_desc_int *d, return 0; } +static unsigned char *intc_evt2irq_table; + +unsigned int intc_evt2irq(unsigned int vector) +{ + unsigned int irq = evt2irq(vector); + + if (intc_evt2irq_table && intc_evt2irq_table[irq]) + irq = intc_evt2irq_table[irq]; + + return irq; +} void __init register_intc_controller(struct intc_desc *desc) { @@ -705,9 +720,41 @@ void __init register_intc_controller(struct intc_desc *desc) BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ + /* keep the first vector only if same enum is used multiple times */ + for (i = 0; i < desc->nr_vectors; i++) { + struct intc_vect *vect = desc->vectors + i; + int first_irq = evt2irq(vect->vect); + + if (!vect->enum_id) + continue; + + for (k = i + 1; k < desc->nr_vectors; k++) { + struct intc_vect *vect2 = desc->vectors + k; + + if (vect->enum_id != vect2->enum_id) + continue; + + vect2->enum_id = 0; + + if (!intc_evt2irq_table) + intc_evt2irq_table = alloc_bootmem(NR_IRQS); + + if (!intc_evt2irq_table) { + pr_warning("intc: cannot allocate evt2irq!\n"); + continue; + } + + intc_evt2irq_table[evt2irq(vect2->vect)] = first_irq; + } + } + + /* register the vectors one by one */ for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; + if (!vect->enum_id) + continue; + intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect)); } } diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index 68e212ff9dde..eb1423a0078d 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -85,6 +85,7 @@ struct intc_desc symbol __initdata = { \ } #endif +unsigned int intc_evt2irq(unsigned int vector); void __init register_intc_controller(struct intc_desc *desc); int intc_set_priority(unsigned int irq, unsigned int prio); -- cgit v1.2.3 From 69977e7e25a291fd71c6dcaf2c5ea9e776afede5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 22:59:04 +0900 Subject: sh: multiple vectors per irq - sh7750 Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh775x hardware blocks such as SCI/SCIF/RTC/DMAC/TMU2/REF. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 87 ++++++++++------------------------- 1 file changed, 25 insertions(+), 62 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index ec884039b914..a1c80d909cd6 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -21,17 +21,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 20, .flags = IORESOURCE_IRQ, }, @@ -50,13 +40,13 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, + .irqs = { 23, 23, 23, 0 }, }, { #endif .mapbase = 0xffe80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .flags = 0, } @@ -87,43 +77,27 @@ enum { /* interrupt sources */ IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */ - HUDI, GPIOI, - DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, - DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, - DMAC_DMAE, + HUDI, GPIOI, DMAC, PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON, PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3, - TMU3, TMU4, TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - RTC_ATI, RTC_PRI, RTC_CUI, - SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI, - SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI, - WDT, - REF_RCMI, REF_ROVI, + TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF, /* interrupt groups */ - DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF, + PCIC1, }; static struct intc_vect vectors[] __initdata = { INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), - INTC_VECT(SCI1_ERI, 0x4e0), INTC_VECT(SCI1_RXI, 0x500), - INTC_VECT(SCI1_TXI, 0x520), INTC_VECT(SCI1_TEI, 0x540), - INTC_VECT(SCIF_ERI, 0x700), INTC_VECT(SCIF_RXI, 0x720), - INTC_VECT(SCIF_BRI, 0x740), INTC_VECT(SCIF_TXI, 0x760), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), + INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500), + INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540), + INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720), + INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760), INTC_VECT(WDT, 0x560), - INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), -}; - -static struct intc_group groups[] __initdata = { - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI), - INTC_GROUP(SCIF, SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI), - INTC_GROUP(REF, REF_RCMI, REF_ROVI), + INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -136,7 +110,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { PCIC1, PCIC0_PCISERR } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL, NULL, prio_registers, NULL); /* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */ @@ -145,39 +119,28 @@ static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) static struct intc_vect vectors_dma4[] __initdata = { - INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), - INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), - INTC_VECT(DMAC_DMAE, 0x6c0), -}; - -static struct intc_group groups_dma4[] __initdata = { - INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, - DMAC_DMTE3, DMAC_DMAE), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x6c0), }; static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4", - vectors_dma4, groups_dma4, + vectors_dma4, NULL, NULL, prio_registers, NULL); #endif /* SH7750R and SH7751R both have 8-channel DMA controllers */ #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R) static struct intc_vect vectors_dma8[] __initdata = { - INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), - INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), - INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), - INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0), - INTC_VECT(DMAC_DMAE, 0x6c0), -}; - -static struct intc_group groups_dma8[] __initdata = { - INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, - DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, - DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0), + INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0), + INTC_VECT(DMAC, 0x6c0), }; static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8", - vectors_dma8, groups_dma8, + vectors_dma8, NULL, NULL, prio_registers, NULL); #endif -- cgit v1.2.3 From a842fb2d11ee478dc2fd09b736b1bc62c386f18a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 22:59:12 +0900 Subject: sh: multiple vectors per irq - sh7780 Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7780 hardware blocks such as SCIF/RTC/DMAC/PCIC5/MMCIF/FLCTL/GPIO Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 97 +++++++++++----------------------- 1 file changed, 30 insertions(+), 67 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index fb8200cc7440..6f7227cd65bf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -20,17 +20,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 20, .flags = IORESOURCE_IRQ, }, @@ -48,12 +38,12 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 76, 77, 79, 78 }, + .irqs = { 76, 76, 76, 76 }, }, { .flags = 0, } @@ -90,82 +80,55 @@ enum { IRL_HHLL, IRL_HHLH, IRL_HHHL, IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - TMU0, TMU1, TMU2, TMU2_TICPI, - HUDI, - DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - DMAC0_DMINT4, DMAC0_DMINT5, DMAC1_DMINT6, DMAC1_DMINT7, - CMT, HAC, - PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, - PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - SIOF, HSPI, - MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, - DMAC1_DMINT8, DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, - TMU3, TMU4, TMU5, - SSI, - FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1, - GPIOI0, GPIOI1, GPIOI2, GPIOI3, + RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5, + SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO, /* interrupt groups */ - RTC, TMU012, DMAC0, SCIF0, DMAC45, DMAC1, - PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO, + TMU012, TMU345, }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), - INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), - INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0), - INTC_VECT(DMAC0_DMAE, 0x6c0), - INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), - INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), - INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0), - INTC_VECT(DMAC1_DMINT6, 0x7c0), INTC_VECT(DMAC1_DMINT7, 0x7e0), + INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660), + INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0), + INTC_VECT(DMAC0, 0x6c0), + INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720), + INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760), + INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0), + INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0), INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980), INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), - INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), - INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), - INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), - INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0), - INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0), + INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0), + INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20), + INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0), + INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0), INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80), - INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), - INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), - INTC_VECT(DMAC1_DMINT8, 0xd80), INTC_VECT(DMAC1_DMINT9, 0xda0), - INTC_VECT(DMAC1_DMINT10, 0xdc0), INTC_VECT(DMAC1_DMINT11, 0xde0), + INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20), + INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60), + INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0), + INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0), INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), INTC_VECT(TMU5, 0xe40), INTC_VECT(SSI, 0xe80), - INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20), - INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60), - INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0), - INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), + INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20), + INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60), + INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0), + INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0), }; static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), - INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, - DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, - DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11), - INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), INTC_GROUP(TMU345, TMU3, TMU4, TMU5), - INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND, - FLCTL_FLTRQ0, FLCTL_FLTRQ1), - INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; static struct intc_mask_reg mask_registers[] __initdata = { -- cgit v1.2.3 From 57e41c86e21c03941d17df29e0793fd04585d9ee Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 22:59:19 +0900 Subject: sh: multiple vectors per irq - sh7785 Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7785 hardware blocks such as SCIF/DMAC/PCIC5/MMCIF/GDTA/FLCTL/GPIO Signed-off-by: Magnus Damm Tested-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 95 ++++++++++++---------------------- 1 file changed, 32 insertions(+), 63 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 30baa63b24c8..d80802a49dbd 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -20,18 +20,13 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffea0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .mapbase = 0xffeb0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 44, 45, 47, 46 }, - }, - - /* - * The rest of these all have multiplexed IRQs - */ - { + .irqs = { 44, 44, 44, 44 }, + }, { .mapbase = 0xffec0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, @@ -91,33 +86,19 @@ enum { IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, - WDT, - TMU0, TMU1, TMU2, TMU2_TICPI, - HUDI, - DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, - DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9, - DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE, - HSPI, + WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI, SCIF2, SCIF3, SCIF4, SCIF5, - PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, - PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, - SIOF, - MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, - DU, - GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5, + SIOF, MMCIF, DU, GDTA, TMU3, TMU4, TMU5, SSI0, SSI1, HAC0, HAC1, - FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1, - GPIOI0, GPIOI1, GPIOI2, GPIOI3, + FLCTL, GPIO, /* interrupt groups */ - TMU012, DMAC0, SCIF0, SCIF1, DMAC1, - PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO + TMU012, TMU345 }; static struct intc_vect vectors[] __initdata = { @@ -125,57 +106,45 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), - INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640), - INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680), - INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0), - INTC_VECT(DMAC0_DMAE, 0x6e0), - INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), - INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), - INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), - INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), - INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0), - INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0), - INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920), - INTC_VECT(DMAC1_DMAE, 0x940), + INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640), + INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680), + INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0), + INTC_VECT(DMAC0, 0x6e0), + INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720), + INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760), + INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0), + INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0), + INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0), + INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0), + INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920), + INTC_VECT(DMAC1, 0x940), INTC_VECT(HSPI, 0x960), INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0), INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0), INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), - INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), - INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), - INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0), + INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0), + INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20), INTC_VECT(SIOF, 0xc00), - INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), - INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), + INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20), + INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60), INTC_VECT(DU, 0xd80), - INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0), - INTC_VECT(GDTA_GAERI, 0xde0), + INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0), + INTC_VECT(GDTA, 0xde0), INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), INTC_VECT(TMU5, 0xe40), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0), - INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20), - INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60), - INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0), - INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), + INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20), + INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60), + INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0), + INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0), }; static struct intc_group groups[] __initdata = { INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), - INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, - DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, - DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE), - INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), - INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), - INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI), INTC_GROUP(TMU345, TMU3, TMU4, TMU5), - INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND, - FLCTL_FLTRQ0, FLCTL_FLTRQ1), - INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; static struct intc_mask_reg mask_registers[] __initdata = { -- cgit v1.2.3 From 0d5e19ab07cf61cb0794cfac4df0a1bd5d1e19d7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 27 Feb 2009 17:02:28 +0900 Subject: sh: Fix up SH-X3 general exception handler build. With the recent entry.S refactoring, the SH-X3 path had a mov.l for a register to register copy, resulting in: AS arch/sh/kernel/cpu/sh4/../sh3/entry.o arch/sh/kernel/cpu/sh4/../sh3/entry.S: Assembler messages: arch/sh/kernel/cpu/sh4/../sh3/entry.S:366: Error: invalid operands for opcode make[3]: *** [arch/sh/kernel/cpu/sh4/../sh3/entry.o] Error 1 Switch it over to a mov to fix it up. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index e984e94394ec..c4829d6dee51 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -363,7 +363,7 @@ general_exception: ! Save registers / Switch to bank 0 bsr save_regs ! needs original pr value in k3 - mov.l k4, k2 ! keep vector in k2 + mov k4, k2 ! keep vector in k2 bra handle_exception_special nop -- cgit v1.2.3 From bedfcebb4fb33fc9ebd395462e72afa103db0bec Mon Sep 17 00:00:00 2001 From: peerchen Date: Fri, 27 Feb 2009 17:03:19 +0800 Subject: ALSA: hda - Add the Device IDs for MCP89 and remove IDs of MCP7B Added the Device IDs for MCP89 HD audio controller. Removed the IDs of MCP7B cause this chipset had been cancelled. Signed-off-by: Peer Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c5a5dc5698a2..47a5833feb7a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2454,10 +2454,10 @@ static struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x10de, 0x0ac1), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0ac2), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0ac3), .driver_data = AZX_DRIVER_NVIDIA }, - { PCI_DEVICE(0x10de, 0x0bd4), .driver_data = AZX_DRIVER_NVIDIA }, - { PCI_DEVICE(0x10de, 0x0bd5), .driver_data = AZX_DRIVER_NVIDIA }, - { PCI_DEVICE(0x10de, 0x0bd6), .driver_data = AZX_DRIVER_NVIDIA }, - { PCI_DEVICE(0x10de, 0x0bd7), .driver_data = AZX_DRIVER_NVIDIA }, + { PCI_DEVICE(0x10de, 0x0d94), .driver_data = AZX_DRIVER_NVIDIA }, + { PCI_DEVICE(0x10de, 0x0d95), .driver_data = AZX_DRIVER_NVIDIA }, + { PCI_DEVICE(0x10de, 0x0d96), .driver_data = AZX_DRIVER_NVIDIA }, + { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA }, /* Teradici */ { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA }, /* AMD Generic, PCI class code and Vendor ID for HD Audio */ -- cgit v1.2.3 From 3782d3605522b836f53c6d11f76abf5404425c1b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:25:37 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c Fix the following sparse warnings in s3c6400-clock.c: 39:12: warning: symbol 'clk_ext_xtal_mux' was not declared. Should it be static? 66:12: warning: symbol 'clk_fout_apll' was not declared. Should it be static? 81:19: warning: symbol 'clk_mout_apll' was not declared. Should it be static? 91:12: warning: symbol 'clk_fout_epll' was not declared. Should it be static? 106:19: warning: symbol 'clk_mout_epll' was not declared. Should it be static? 126:19: warning: symbol 'clk_mout_mpll' was not declared. Should it be static? 148:12: warning: symbol 'clk_dout_mpll' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 2984270b40a7..6edbeef6aa9d 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -36,7 +36,7 @@ * ext_xtal_mux for want of an actual name from the manual. */ -struct clk clk_ext_xtal_mux = { +static struct clk clk_ext_xtal_mux = { .name = "ext_xtal", .id = -1, }; @@ -63,7 +63,7 @@ struct clksrc_clk { void __iomem *reg_divider; }; -struct clk clk_fout_apll = { +static struct clk clk_fout_apll = { .name = "fout_apll", .id = -1, }; @@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; -struct clksrc_clk clk_mout_apll = { +static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", .id = -1, @@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -struct clk clk_fout_epll = { +static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, }; @@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; -struct clksrc_clk clk_mout_epll = { +static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", .id = -1, @@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = { .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; -struct clksrc_clk clk_mout_mpll = { +static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", .id = -1, @@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) return rate; } -struct clk clk_dout_mpll = { +static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_mpll.clk, -- cgit v1.2.3 From fdca9bf2dae14218704ddd7dc60ad1b198c1d787 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 27 Feb 2009 11:29:23 +0000 Subject: [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c Fix the following sparse warnings in arch/arm/plat-s3c64xx/irq.c arch/arm/plat-s3c64xx/irq.c:210:23: warning: incorrect type in initializer (different address spaces) arch/arm/plat-s3c64xx/irq.c:210:23: expected void *reg_base arch/arm/plat-s3c64xx/irq.c:210:23: got void [noderef] *regs arch/arm/plat-s3c64xx/irq.c:215:2: warning: incorrect type in argument 1 (different address spaces) arch/arm/plat-s3c64xx/irq.c:215:2: expected void const volatile [noderef] * arch/arm/plat-s3c64xx/irq.c:215:2: got void * Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index a94f1d5e819d..f22edf7c2d2d 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = { static void __init s3c64xx_uart_irq(struct uart_irq *uirq) { - void *reg_base = uirq->regs; + void __iomem *reg_base = uirq->regs; unsigned int irq; int offs; -- cgit v1.2.3 From efeff568677aa325f84d3ce37c219019887a79eb Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Fri, 27 Feb 2009 08:03:07 -0300 Subject: [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc Some of the rate selection logic in s3c64xx_setrate_clksrc uses what appears to be parent clock selection logic. This patch corrects it. I also added a check for overly large dividers to prevent them from changing unrelated clocks. Signed-off-by: Werner Almesberger Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 6edbeef6aa9d..05b17528041e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) rate = clk_round_rate(clk, rate); div = clk_get_rate(clk->parent) / rate; + if (div > 16) + return -EINVAL; val = __raw_readl(reg); - val &= ~sclk->mask; - val |= (rate - 1) << sclk->shift; + val &= ~(0xf << sclk->shift); + val |= (div - 1) << sclk->shift; __raw_writel(val, reg); return 0; -- cgit v1.2.3 From 82af308f658cf2193e5058bbbfd37c3437cfb4e7 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 27 Feb 2009 09:27:44 +0100 Subject: sound: oxygen: zero-initialize model data Model drivers assume that model_data is zeroed, so we better use kzalloc() (like we did before when it was allocated together with the card structure). Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 6e1cdd2fd768..312251d39696 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -566,7 +566,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, goto err_pci_regions; if (chip->model.model_data_size) { - chip->model_data = kmalloc(chip->model.model_data_size, + chip->model_data = kzalloc(chip->model.model_data_size, GFP_KERNEL); if (!chip->model_data) { err = -ENOMEM; -- cgit v1.2.3 From 53eff7e1e0de1cde8e8cbe619f401d2578dde946 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 27 Feb 2009 17:49:44 +0100 Subject: ALSA: hda - Match all 103c:17xx devices for HP BPC model Use SND_PCI_QUIRK_MASK() to match all devices with 103c:17xx for HP BPC model. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e72b74efc697..0b4afa0a3519 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10807,7 +10807,8 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { ALC262_HP_BPC), SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1300, "HP xw series", ALC262_HP_BPC), - SND_PCI_QUIRK(0x103c, 0x170b, "HP xw*", ALC262_HP_BPC), + SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1700, "HP xw series", + ALC262_HP_BPC), SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL), SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF), SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL), -- cgit v1.2.3 From c82c8abdeef53eb0bb0504becb4e91bbccceaee8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 27 Feb 2009 17:52:22 +0100 Subject: ALSA: hda - Fix an "unused variable" compile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Forgot to remove an unused variable. sound/pci/hda/patch_realtek.c: In function ‘alc882_auto_init_analog_input’: sound/pci/hda/patch_realtek.c:7018: warning: unused variable ‘vref’ Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0b4afa0a3519..1cc31ac03522 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7015,7 +7015,6 @@ static void alc882_auto_init_analog_input(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; - unsigned int vref; if (!nid) continue; alc_set_input_pin(codec, nid, AUTO_PIN_FRONT_MIC /*i*/); -- cgit v1.2.3 From c8efef1745d168b80c800e98cce48a59630dbbfc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 28 Feb 2009 17:09:57 +0000 Subject: ASoC: Fix copyright statements on Simtec files Fix the copyright statements in two of the S3C24XX ASoC files that have (c) when we require the full word. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx-pcm.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index 6f4d439b57aa..1c2b05497107 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -4,7 +4,7 @@ * (c) 2006 Wolfson Microelectronics PLC. * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com * - * (c) 2004-2005 Simtec Electronics + * Copyright 2004-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 7c64d31d067e..ba1ae09dfaed 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -4,7 +4,7 @@ * (c) 2006 Wolfson Microelectronics PLC. * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com * - * (c) 2004-2005 Simtec Electronics + * Copyright 2004-2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * -- cgit v1.2.3 From 4eae080dda3a563160be2f642cfbda27ffc42178 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 Feb 2009 14:37:21 +0100 Subject: ASoC: Add cs4270 support for slave mode configurations Added support for scenarios where the Cirrus CS4270 audio codec is slave to the bitclk and lrclk. Mixed setups are unsupported. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index cd4a9ee38e46..339e0f6b0fe2 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -109,6 +109,7 @@ struct cs4270_private { u8 reg_cache[CS4270_NUMREGS]; unsigned int mclk; /* Input frequency of the MCLK pin */ unsigned int mode; /* The mode (I2S or left-justified) */ + unsigned int slave_mode; }; /** @@ -247,6 +248,7 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, struct cs4270_private *cs4270 = codec->private_data; int ret = 0; + /* set DAI format */ switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: case SND_SOC_DAIFMT_LEFT_J: @@ -257,6 +259,21 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, ret = -EINVAL; } + /* set master/slave audio interface */ + switch (format & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + cs4270->slave_mode = 1; + break; + case SND_SOC_DAIFMT_CBM_CFM: + cs4270->slave_mode = 0; + break; + case SND_SOC_DAIFMT_CBM_CFS: + /* unsupported - cs4270 can eigther be slave or master to + * both the bitclk and the lrclk. */ + default: + ret = -EINVAL; + } + return ret; } @@ -399,7 +416,12 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, reg = snd_soc_read(codec, CS4270_MODE); reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK); - reg |= cs4270_mode_ratios[i].speed_mode | cs4270_mode_ratios[i].mclk; + reg |= cs4270_mode_ratios[i].mclk; + + if (cs4270->slave_mode) + reg |= CS4270_MODE_SLAVE; + else + reg |= cs4270_mode_ratios[i].speed_mode; ret = snd_soc_write(codec, CS4270_MODE, reg); if (ret < 0) { -- cgit v1.2.3 From 8b37dbd2a180667e51db0552383df18743239c25 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 28 Feb 2009 21:14:20 +0000 Subject: ASoC: Add SND_SOC_DAPM_PIN_SWITCH controls for exposing DAPM pins On some systems it is desirable for control for DAPM pins to be provided to user space. This is the case with things like GSM modems which are controlled primarily from user space, for example. Provide a helper which exposes the state of a DAPM pin to user space for use in cases like this. Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 12 +++++++++ sound/soc/soc-dapm.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 82 insertions(+) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index bb3a863ad14e..a7def6a9a030 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -192,6 +192,12 @@ .get = snd_soc_dapm_get_value_enum_double, \ .put = snd_soc_dapm_put_value_enum_double, \ .private_value = (unsigned long)&xenum } +#define SOC_DAPM_PIN_SWITCH(xname) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname " Switch", \ + .info = snd_soc_dapm_info_pin_switch, \ + .get = snd_soc_dapm_get_pin_switch, \ + .put = snd_soc_dapm_put_pin_switch, \ + .private_value = (unsigned long)xname } /* dapm stream operations */ #define SND_SOC_DAPM_STREAM_NOP 0x0 @@ -238,6 +244,12 @@ int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uncontrol); +int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uncontrol); int snd_soc_dapm_new_control(struct snd_soc_codec *codec, const struct snd_soc_dapm_widget *widget); int snd_soc_dapm_new_controls(struct snd_soc_codec *codec, diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index f4a8753c84c0..4b8dbbfe2efb 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1420,6 +1420,76 @@ out: } EXPORT_SYMBOL_GPL(snd_soc_dapm_put_value_enum_double); +/** + * snd_soc_dapm_info_pin_switch - Info for a pin switch + * + * @kcontrol: mixer control + * @uinfo: control element information + * + * Callback to provide information about a pin switch control. + */ +int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_info_pin_switch); + +/** + * snd_soc_dapm_get_pin_switch - Get information for a pin switch + * + * @kcontrol: mixer control + * @ucontrol: Value + */ +int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + const char *pin = (const char *)kcontrol->private_value; + + mutex_lock(&codec->mutex); + + ucontrol->value.integer.value[0] = + snd_soc_dapm_get_pin_status(codec, pin); + + mutex_unlock(&codec->mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_switch); + +/** + * snd_soc_dapm_put_pin_switch - Set information for a pin switch + * + * @kcontrol: mixer control + * @ucontrol: Value + */ +int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + const char *pin = (const char *)kcontrol->private_value; + + mutex_lock(&codec->mutex); + + if (ucontrol->value.integer.value[0]) + snd_soc_dapm_enable_pin(codec, pin); + else + snd_soc_dapm_disable_pin(codec, pin); + + snd_soc_dapm_sync(codec); + + mutex_unlock(&codec->mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_put_pin_switch); + /** * snd_soc_dapm_new_control - create new dapm control * @codec: audio codec -- cgit v1.2.3 From 6b8036a877fe7a85d4474ddb89993339303959e1 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 28 Feb 2009 21:30:38 -0700 Subject: powerpc/4xx: Enable SERIAL_OF support by default for Virtex platforms Virtex FPGA designs have two serial port logic cores to choose from; the simple uartlite, and the full featured uart16550. Both cores are in common use so the defconfig should support both of them. Currently only console on uartlite is supported in the defconfig. This patch adds console support for the 16550 core. The Virtex reference designs do not work without this patch. Signed-off-by: Grant Likely --- arch/powerpc/configs/40x/virtex_defconfig | 2 +- arch/powerpc/configs/44x/virtex5_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig index b6888384dd74..f5698f962e58 100644 --- a/arch/powerpc/configs/40x/virtex_defconfig +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -686,7 +686,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 15aab1ca6384..1bf0a63614b1 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -691,7 +691,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -- cgit v1.2.3 From 892981ffbe9a5c4cbc9d75f423b145f32c765f9c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 08:04:35 +0100 Subject: ALSA: hda - Don't create a beep control for digital-only ALC268 When an ALC268 codec is set up as the digital-only (as found in Toshiba laptops), it shouldn't contain any beep control that conflict with the primary codec. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1cc31ac03522..c60c86acd9ba 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11915,7 +11915,7 @@ static int alc268_parse_auto_config(struct hda_codec *codec) if (spec->kctls.list) add_mixer(spec, spec->kctls.list); - if (spec->autocfg.speaker_pins[0] != 0x1d) + if (!spec->no_analog && spec->autocfg.speaker_pins[0] != 0x1d) add_mixer(spec, alc268_beep_mixer); add_verb(spec, alc268_volume_init_verbs); -- cgit v1.2.3 From 4c4531d64dd0442813c7307b860bf40a2aec51bc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 08:06:11 +0100 Subject: ALSA: hda - Remove Toshiba probe_mask quirk Revert the Toshiba probe_mask quirk for 2.6.29 kernel (commit 38f1df27e3191d76e983cb9c6b4392582fd32fda). In the current tree, the digital-only codec is handled properly so no codec conflict should occur. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 68a128fb487d..47a5833feb7a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2095,8 +2095,6 @@ static struct snd_pci_quirk probe_mask_list[] __devinitdata = { SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01), /* including bogus ALC268 in slot#2 that conflicts with ALC888 */ SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01), - /* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */ - SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03), /* forced codec slots */ SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103), {} -- cgit v1.2.3 From a572e217c6f09fb02853d3196458b8bf30a9a321 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 2 Mar 2009 17:22:36 +0800 Subject: Blackfin arch: drop untested and useless "generic" board file Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/Kconfig | 5 - arch/blackfin/mach-bf533/boards/Makefile | 1 - arch/blackfin/mach-bf533/boards/generic_board.c | 126 ---- arch/blackfin/mach-bf537/boards/Kconfig | 5 - arch/blackfin/mach-bf537/boards/Makefile | 1 - arch/blackfin/mach-bf537/boards/generic_board.c | 745 ------------------------ arch/blackfin/mach-bf561/boards/Kconfig | 5 - arch/blackfin/mach-bf561/boards/Makefile | 1 - arch/blackfin/mach-bf561/boards/generic_board.c | 113 ---- 9 files changed, 1002 deletions(-) delete mode 100644 arch/blackfin/mach-bf533/boards/generic_board.c delete mode 100644 arch/blackfin/mach-bf537/boards/generic_board.c delete mode 100644 arch/blackfin/mach-bf561/boards/generic_board.c diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 308c98dc5aba..8d8b3e7321e6 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -38,9 +38,4 @@ config BFIN532_IP0X help Core support for IP04/IP04 open hardware IP-PBX. -config GENERIC_BF533_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 9afbe72b484f..ff1e832f80d2 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf533/boards/Makefile # -obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c deleted file mode 100644 index 986eeec53b1f..000000000000 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams - * - * Created: 2005 - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "UNKNOWN BOARD"; - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 42a57b0acb29..77c59da87e85 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR help Board supply package for CSP Minotaur -config GENERIC_BF537_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 7168cc14afd8..68b98a7af6a6 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf537/boards/Makefile # -obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c deleted file mode 100644 index da710fdc4569..000000000000 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/boards/generic_board.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -#include -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x203C0000, - .end = 0x203C0000 + 0x000fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .port1_disable = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) -static struct resource bfin_pcmcia_cf_resources[] = { - { - .start = 0x20310000, /* IO PORT */ - .end = 0x20312000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20311000, /* Attribute Memory */ - .end = 0x20311FFF, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF4, - .end = IRQ_PF4, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, { - .start = 6, /* Card Detect PF6 */ - .end = 6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pcmcia_cf_device = { - .name = "bfin_cf_pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), - .resource = bfin_pcmcia_cf_resources, -}; -#endif - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource dm9000_resources[] = { - [0] = { - .start = 0x203FB800, - .end = 0x203FB800 + 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x203FB800 + 4, - .end = 0x203FB800 + 5, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), - }, -}; - -static struct platform_device dm9000_device = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, -}; -#endif - -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - -static struct platform_device bfin_mac_device = { - .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, -}; -#endif - -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x20300000, - .end = 0x20300000 + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) -static struct mtd_partition bfin_spi_flash_partitions[] = { - { - .name = "bootloader(spi)", - .size = 0x00020000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "linux kernel(spi)", - .size = 0xe0000, - .offset = 0x20000 - }, { - .name = "file system(spi)", - .size = 0x700000, - .offset = 0x00100000, - } -}; - -static struct flash_platform_data bfin_spi_flash_data = { - .name = "m25p80", - .parts = bfin_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p64", -}; - -/* SPI flash chip (m25p64) */ -static struct bfin5xx_spi_chip spi_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) -static struct bfin5xx_spi_chip ad9960_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_PBX) -static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { - .ctl_reg = 0x4, /* send zero */ - .enable_dma = 0, - .bits_per_word = 8, - .cs_change_per_word = 1, -}; -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - -static const struct ad7877_platform_data bfin_ad7877_ts_info = { - .model = 7877, - .vref_delay_usecs = 50, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .pressure_max = 1000, - .pressure_min = 0, - .stopacq_polarity = 1, - .first_conversion_delay = 3, - .acquisition_time = 1, - .averaging = 1, - .pen_down_acc_interval = 1, -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) - { - /* the modalias must be the same as spi device driver name */ - .modalias = "m25p80", /* Name of spi_driver for this device */ - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ - .platform_data = &bfin_spi_flash_data, - .controller_data = &spi_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) - { - .modalias = "ad1836-spi", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, - .controller_data = &ad1836_spi_chip_info, - }, -#endif -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) - { - .modalias = "ad9960-spi", - .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .controller_data = &ad9960_spi_chip_info, - }, -#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_PBX) - { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J11_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J19_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) - { - .modalias = "ad7877", - .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .controller_data = &spi_ad7877_chip_info, - }, -#endif -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-lq035", -}; -#endif - -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#ifdef CONFIG_BFIN_SIR1 -static struct resource bfin_sir1_resources[] = { - { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART1_RX, - .end = CH_UART1_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir1_device = { - .name = "bfin_sir", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_sir1_resources), - .resource = bfin_sir1_resources, -}; -#endif -#endif - -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) -static struct resource bfin_twi0_resource[] = { - [0] = { - .start = TWI0_REGBASE, - .end = TWI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TWI, - .end = IRQ_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c_bfin_twi_device = { - .name = "i2c-bfin-twi", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_twi0_resource), - .resource = bfin_twi0_resource, -}; -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) -static struct platform_device bfin_sport0_uart_device = { - .name = "bfin-sport-uart", - .id = 0, -}; - -static struct platform_device bfin_sport1_uart_device = { - .name = "bfin-sport-uart", - .id = 1, -}; -#endif - -static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) - &bfin_pcmcia_cf_device, -#endif - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, -#endif - -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) - &dm9000_device, -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, - &bfin_mac_device, -#endif - -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) - &net2272_bfin_device, -#endif - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) - &bfin_isp1760_device, -#endif - -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &bfin_spi0_device, -#endif - -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) - &bfin_fb_device, -#endif - -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#ifdef CONFIG_BFIN_SIR1 - &bfin_sir1_device, -#endif -#endif - -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) - &i2c_bfin_twi_device, -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) - &bfin_sport0_uart_device, - &bfin_sport1_uart_device, -#endif -}; - -static int __init generic_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif - - return 0; -} - -arch_initcall(generic_init); - -void native_machine_restart(char *cmd) -{ - /* workaround reboot hang when booting from SPI */ - if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); -} - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -void bfin_get_ether_addr(char *addr) -{ - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); -} -EXPORT_SYMBOL(bfin_get_ether_addr); -#endif diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig index e41a67b1fb53..e4bc6d7c5a6a 100644 --- a/arch/blackfin/mach-bf561/boards/Kconfig +++ b/arch/blackfin/mach-bf561/boards/Kconfig @@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM help CM-BF561 support for EVAL- and DEV-Board. -config GENERIC_BF561_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 04add010b568..3a152559e957 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf561/boards/Makefile # -obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c deleted file mode 100644 index 0ba366a0e696..000000000000 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * File: arch/blackfin/mach-bf561/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -const char bfin_board_name[] = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x2C010300, - .end = 0x2C010300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(generic_board_devices, - ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); -- cgit v1.2.3 From d1f1af2dbf8207db590853a59bec465c4f68cfdc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 10:35:29 +0100 Subject: ALSA: hda - Intialize more codec fields in snd_hda_codec_reset() Initiailize forgotten fields in snd_hda_codec_reset(). Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 5dceee8a113b..3b44c789f23b 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1519,6 +1519,9 @@ int snd_hda_codec_reset(struct hda_codec *codec) codec->num_pcms = 0; codec->pcm_info = NULL; codec->preset = NULL; + memset(&codec->patch_ops, 0, sizeof(codec->patch_ops)); + codec->slave_dig_outs = NULL; + codec->spdif_status_reset = 0; module_put(codec->owner); codec->owner = NULL; -- cgit v1.2.3 From f93d461bcde6ac3db542361c00a7e4167f88176d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 10:44:15 +0100 Subject: ALSA: hda - Revert the codec probe at control-creation errors Revert the codec probe instead of returning the error to the driver when any error occurs at creating the control elements. The control element conflict can be non-fatal in many cases, especially if it comes from the digital-only codec. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 3b44c789f23b..1be34ed9c0eb 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1434,7 +1434,6 @@ int snd_hda_ctl_add(struct hda_codec *codec, struct snd_kcontrol *kctl) } EXPORT_SYMBOL_HDA(snd_hda_ctl_add); -#ifdef CONFIG_SND_HDA_RECONFIG /* Clear all controls assigned to the given codec */ void snd_hda_ctls_clear(struct hda_codec *codec) { @@ -1529,7 +1528,6 @@ int snd_hda_codec_reset(struct hda_codec *codec) hda_unlock_devices(card); return 0; } -#endif /* CONFIG_SND_HDA_RECONFIG */ /* create a virtual master control and add slaves */ int snd_hda_add_vmaster(struct hda_codec *codec, char *name, @@ -2392,8 +2390,16 @@ int /*__devinit*/ snd_hda_build_controls(struct hda_bus *bus) list_for_each_entry(codec, &bus->codec_list, list) { int err = snd_hda_codec_build_controls(codec); - if (err < 0) - return err; + if (err < 0) { + printk(KERN_ERR "hda_codec: cannot build controls" + "for #%d (error %d)\n", codec->addr, err); + err = snd_hda_codec_reset(codec); + if (err < 0) { + printk(KERN_ERR + "hda_codec: cannot revert codec\n"); + return err; + } + } } return 0; } -- cgit v1.2.3 From 6e655bf21697d2594243098a14e0699e8d4a4059 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 10:46:03 +0100 Subject: ALSA: hda - Don't return a fatal error at PCM-creation errors Don't return a fatal error to the driver but continue to probe when any error occurs at creating PCM streams for each codec. It's often non-fatal and keeping it would help debugging. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 1be34ed9c0eb..7c9ef5c18e77 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2833,8 +2833,16 @@ int snd_hda_codec_build_pcms(struct hda_codec *codec) if (!codec->patch_ops.build_pcms) return 0; err = codec->patch_ops.build_pcms(codec); - if (err < 0) - return err; + if (err < 0) { + printk(KERN_ERR "hda_codec: cannot build PCMs" + "for #%d (error %d)\n", codec->addr, err); + err = snd_hda_codec_reset(codec); + if (err < 0) { + printk(KERN_ERR + "hda_codec: cannot revert codec\n"); + return err; + } + } } for (pcm = 0; pcm < codec->num_pcms; pcm++) { struct hda_pcm *cpcm = &codec->pcm_info[pcm]; @@ -2846,11 +2854,15 @@ int snd_hda_codec_build_pcms(struct hda_codec *codec) if (!cpcm->pcm) { dev = get_empty_pcm_device(codec->bus, cpcm->pcm_type); if (dev < 0) - return 0; + continue; /* no fatal error */ cpcm->device = dev; err = snd_hda_attach_pcm(codec, cpcm); - if (err < 0) - return err; + if (err < 0) { + printk(KERN_ERR "hda_codec: cannot attach " + "PCM stream %d for codec #%d\n", + dev, codec->addr); + continue; /* no fatal error */ + } } } return 0; -- cgit v1.2.3 From 28e4cf22a3707d05eb697b9b8ae6a4ed39c99b45 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 2 Mar 2009 18:04:24 +0800 Subject: Blackfin arch: Disable NAND option by default Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF537-STAMP_defconfig | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 4fb4108d3103..c61b6000a9eb 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=m -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_BFIN is not set -CONFIG_MTD_NAND_IDS=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=m +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # -- cgit v1.2.3 From 0f29456a21ae55c43b4e2a64611f778b1fbe4bdf Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 2 Mar 2009 18:06:13 +0800 Subject: Blackfin arch: Make IRQ_EPPIx_ERROR naming consistent Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/include/mach/irq.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 60299a71e090..f194625f6821 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -123,8 +123,8 @@ Events (highest priority) EMU 0 #define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ #define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ #define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ -#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ -#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ #define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ #define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ #define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ @@ -361,8 +361,8 @@ Events (highest priority) EMU 0 #define IRQ_UART2_ERR IRQ_UART2_ERROR #define IRQ_CAN0_ERR IRQ_CAN0_ERROR #define IRQ_MXVR_ERR IRQ_MXVR_ERROR -#define IRQ_EPP1_ERR IRQ_EPP1_ERROR -#define IRQ_EPP2_ERR IRQ_EPP2_ERROR +#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR +#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR #define IRQ_UART3_ERR IRQ_UART3_ERROR #define IRQ_HOST_ERR IRQ_HOST_ERROR #define IRQ_PIXC_ERR IRQ_PIXC_ERROR -- cgit v1.2.3 From 34d464f8aa3e762ec812a131bfd53ccb4f886f69 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 2 Mar 2009 18:14:47 +0800 Subject: Blackfin arch: use common KGDB_TESTS rather than our own KGDB_TESTCASE Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig.debug | 6 ------ arch/blackfin/kernel/Makefile | 8 +++++--- 2 files changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 5f981d9ca625..79e7e63ab709 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE config HAVE_ARCH_KGDB def_bool y -config KGDB_TESTCASE - tristate "KGDB: for test case in expect" - default n - help - This is a kgdb test case for automated testing. - config DEBUG_VERBOSE bool "Verbose fault messages" default y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 4a92a86824b7..fd4d4328a0f2 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,13 +15,15 @@ else obj-y += time.o endif -CFLAGS_kgdb_test.o := -mlong-calls -O0 - obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o +obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +# the kgdb test puts code into L2 and without linker +# relaxation, we need to force long calls to/from it +CFLAGS_kgdb_test.o := -mlong-calls -O0 -- cgit v1.2.3 From e84dcaa18b2785d8ab20a7cb25612d89feb89fa7 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Mon, 2 Mar 2009 18:37:48 +0800 Subject: Blackfin arch: fix bug - jump_to_zero test case failed on noMPU kernel The nompu code is now derived from the mpu code, and had the same problem - no null pointer detection on ICPLBs. Signed-off-by: Bernd Schmidt Cc: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-nompu/cplbinit.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 0e28f7595733..d6c067782e63 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) i_d = i_i = 0; +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO /* Set up the zero page. */ d_tbl[i_d].addr = 0; d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + i_tbl[i_i].addr = 0; + i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB; +#endif /* Cover kernel memory with 4M pages. */ addr = 0; -- cgit v1.2.3 From 1713c0d508fbbb42aa5f90039195e5ac31a50625 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 27 Feb 2009 21:41:40 +0100 Subject: ALSA: opl3sa2 fix irq releasing and short name of card Two simple fixes: 1. Use the same pointer for the free_irq() and the request_irq() calls. 2. A short name of card is appended with '2' or '3' character depending on a detected chip. Remove the '2' character from the short name. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/opl3sa2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 06810dfb9d9a..19b2d0420a26 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -617,7 +617,7 @@ static void snd_opl3sa2_free(struct snd_card *card) { struct snd_opl3sa2 *chip = card->private_data; if (chip->irq >= 0) - free_irq(chip->irq, (void *)chip); + free_irq(chip->irq, card); release_and_free_resource(chip->res_port); } @@ -630,7 +630,7 @@ static struct snd_card *snd_opl3sa2_card_new(int dev) if (card == NULL) return NULL; strcpy(card->driver, "OPL3SA2"); - strcpy(card->shortname, "Yamaha OPL3-SA2"); + strcpy(card->shortname, "Yamaha OPL3-SA"); chip = card->private_data; spin_lock_init(&chip->reg_lock); chip->irq = -1; -- cgit v1.2.3 From eab2b553c3d3ed20698c4a9c7e049a60b804e2f5 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 2 Mar 2009 11:45:50 +0100 Subject: sound: usb-audio: fix rules check for 32-channel devices When storing the channel numbers used by a format, and if the device happens to support 32 channels, the code would try to store 1<<32 in a 32-bit value. Since no valid format can have zero channels, we can use 1<<(channels-1) instead of 1< Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 2b24496ddec7..f853b627cf43 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1783,7 +1783,7 @@ static int check_hw_params_convention(struct snd_usb_substream *subs) if (rates[f->format] && rates[f->format] != f->rates) goto __out; } - channels[f->format] |= (1 << f->channels); + channels[f->format] |= 1 << (f->channels - 1); rates[f->format] |= f->rates; /* needs knot? */ if (f->rates & SNDRV_PCM_RATE_KNOT) @@ -1810,7 +1810,7 @@ static int check_hw_params_convention(struct snd_usb_substream *subs) continue; for (i = 0; i < 32; i++) { if (f->rates & (1 << i)) - channels[i] |= (1 << f->channels); + channels[i] |= 1 << (f->channels - 1); } } cmaster = 0; -- cgit v1.2.3 From b1c86bb807448701400abc6eb8e958475ab5424b Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 2 Mar 2009 12:06:28 +0100 Subject: sound: usb-audio: fix queue length check for high speed devices When checking for the maximum queue length, we have to take into account that MAX_QUEUE is measured in milliseconds (i.e., frames) while the unit of urb_packs is whatever data packet interval the device uses (possibly less than one frame when using high speed devices). Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index f853b627cf43..defe9913cbb2 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1095,9 +1095,8 @@ static int init_substream_urbs(struct snd_usb_substream *subs, unsigned int peri total_packs = 2 * packs_per_ms; } else { /* and we don't want too long a queue either */ - maxpacks = max((unsigned int)MAX_QUEUE, urb_packs * 2); - if (total_packs > maxpacks * packs_per_ms) - total_packs = maxpacks * packs_per_ms; + maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2); + total_packs = min(total_packs, maxpacks); } } else { total_packs = MAX_URBS * urb_packs; -- cgit v1.2.3 From ff09d49ad0176a5f52a398c137a7ff5f669d6be4 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 28 Feb 2009 13:21:03 +0100 Subject: ASoC: fix typo and removed unneeded switch case for cs4270 This removes a misspelled comment and got rid of superfluous switch case. Signed-off-by: Daniel Mack Acked-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 339e0f6b0fe2..f86f33cc1798 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -267,10 +267,8 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, case SND_SOC_DAIFMT_CBM_CFM: cs4270->slave_mode = 0; break; - case SND_SOC_DAIFMT_CBM_CFS: - /* unsupported - cs4270 can eigther be slave or master to - * both the bitclk and the lrclk. */ default: + /* all other modes are unsupported by the hardware */ ret = -EINVAL; } -- cgit v1.2.3 From 43b62713f67d9f0655f3a61f5bd14d6297ddd3ce Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 14:25:17 +0100 Subject: ALSA: hda - Add hint string helper functions Added snd_hda_get_hint() and snd_hda_get_bool_hint() helper functions to retrieve a hint value. Internally, the hint is stored in a pair of two strings, key and val. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_hwdep.c | 112 ++++++++++++++++++++++++++++++++++++++++------ sound/pci/hda/hda_local.h | 17 +++++++ 2 files changed, 116 insertions(+), 13 deletions(-) diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 4af484b8240c..5e554de9cd9b 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -30,6 +30,12 @@ #include #include +/* hint string pair */ +struct hda_hint { + const char *key; + const char *val; /* contained in the same alloc as key */ +}; + /* * write/read an out-of-bound verb */ @@ -99,15 +105,15 @@ static int hda_hwdep_open(struct snd_hwdep *hw, struct file *file) static void clear_hwdep_elements(struct hda_codec *codec) { - char **head; int i; /* clear init verbs */ snd_array_free(&codec->init_verbs); /* clear hints */ - head = codec->hints.list; - for (i = 0; i < codec->hints.used; i++, head++) - kfree(*head); + for (i = 0; i < codec->hints.used; i++) { + struct hda_hint *hint = snd_array_elem(&codec->hints, i); + kfree(hint->key); /* we don't need to free hint->val */ + } snd_array_free(&codec->hints); snd_array_free(&codec->user_pins); } @@ -141,7 +147,7 @@ int /*__devinit*/ snd_hda_create_hwdep(struct hda_codec *codec) #endif snd_array_init(&codec->init_verbs, sizeof(struct hda_verb), 32); - snd_array_init(&codec->hints, sizeof(char *), 32); + snd_array_init(&codec->hints, sizeof(struct hda_hint), 32); snd_array_init(&codec->user_pins, sizeof(struct hda_pincfg), 16); return 0; @@ -306,26 +312,81 @@ static ssize_t init_verbs_store(struct device *dev, return count; } +static struct hda_hint *get_hint(struct hda_codec *codec, const char *key) +{ + int i; + + for (i = 0; i < codec->hints.used; i++) { + struct hda_hint *hint = snd_array_elem(&codec->hints, i); + if (!strcmp(hint->key, key)) + return hint; + } + return NULL; +} + +static void remove_trail_spaces(char *str) +{ + char *p; + if (!*str) + return; + p = str + strlen(str) - 1; + for (; isspace(*p); p--) { + *p = 0; + if (p == str) + return; + } +} + +#define MAX_HINTS 1024 + static ssize_t hints_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct snd_hwdep *hwdep = dev_get_drvdata(dev); struct hda_codec *codec = hwdep->private_data; - char *p; - char **hint; + char *key, *val; + struct hda_hint *hint; - if (!*buf || isspace(*buf) || *buf == '#' || *buf == '\n') + while (isspace(*buf)) + buf++; + if (!*buf || *buf == '#' || *buf == '\n') return count; - p = kstrndup_noeol(buf, 1024); - if (!p) + if (*buf == '=') + return -EINVAL; + key = kstrndup_noeol(buf, 1024); + if (!key) return -ENOMEM; - hint = snd_array_new(&codec->hints); + /* extract key and val */ + val = strchr(key, '='); + if (!val) { + kfree(key); + return -EINVAL; + } + *val++ = 0; + while (isspace(*val)) + val++; + remove_trail_spaces(key); + remove_trail_spaces(val); + hint = get_hint(codec, key); + if (hint) { + /* replace */ + kfree(hint->key); + hint->key = key; + hint->val = val; + return count; + } + /* allocate a new hint entry */ + if (codec->hints.used >= MAX_HINTS) + hint = NULL; + else + hint = snd_array_new(&codec->hints); if (!hint) { - kfree(p); + kfree(key); return -ENOMEM; } - *hint = p; + hint->key = key; + hint->val = val; return count; } @@ -428,4 +489,29 @@ int snd_hda_hwdep_add_sysfs(struct hda_codec *codec) return 0; } +/* + * Look for hint string + */ +const char *snd_hda_get_hint(struct hda_codec *codec, const char *key) +{ + struct hda_hint *hint = get_hint(codec, key); + return hint ? hint->val : NULL; +} +EXPORT_SYMBOL_HDA(snd_hda_get_hint); + +int snd_hda_get_bool_hint(struct hda_codec *codec, const char *key) +{ + const char *p = snd_hda_get_hint(codec, key); + if (!p || !*p) + return -ENOENT; + switch (toupper(*p)) { + case 'T': /* true */ + case 'Y': /* yes */ + case '1': + return 1; + } + return 0; +} +EXPORT_SYMBOL_HDA(snd_hda_get_bool_hint); + #endif /* CONFIG_SND_HDA_RECONFIG */ diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index 03ee9dd04913..27428c718fd7 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -433,6 +433,23 @@ static inline int snd_hda_hwdep_add_sysfs(struct hda_codec *codec) } #endif +#ifdef CONFIG_SND_HDA_RECONFIG +const char *snd_hda_get_hint(struct hda_codec *codec, const char *key); +int snd_hda_get_bool_hint(struct hda_codec *codec, const char *key); +#else +static inline +const char *snd_hda_get_hint(struct hda_codec *codec, const char *key) +{ + return NULL; +} + +static inline +int snd_hda_get_bool_hint(struct hda_codec *codec, const char *key) +{ + return -ENOENT; +} +#endif + /* * power-management */ -- cgit v1.2.3 From ab1726f920275b52991b2eff7538ac6d313bf9a2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 17:09:25 +0100 Subject: ALSA: hda - Add show for init_verbs and hints sysfs entries Added the show method for init_verbs and hints hwdep sysfs entries. They show the current values. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_hwdep.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 5e554de9cd9b..1e3ccc740afc 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -290,6 +290,22 @@ static ssize_t type##_store(struct device *dev, \ CODEC_ACTION_STORE(reconfig); CODEC_ACTION_STORE(clear); +static ssize_t init_verbs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct snd_hwdep *hwdep = dev_get_drvdata(dev); + struct hda_codec *codec = hwdep->private_data; + int i, len = 0; + for (i = 0; i < codec->init_verbs.used; i++) { + struct hda_verb *v = snd_array_elem(&codec->init_verbs, i); + len += snprintf(buf + len, PAGE_SIZE - len, + "0x%02x 0x%03x 0x%04x\n", + v->nid, v->verb, v->param); + } + return len; +} + static ssize_t init_verbs_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -312,6 +328,21 @@ static ssize_t init_verbs_store(struct device *dev, return count; } +static ssize_t hints_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct snd_hwdep *hwdep = dev_get_drvdata(dev); + struct hda_codec *codec = hwdep->private_data; + int i, len = 0; + for (i = 0; i < codec->hints.used; i++) { + struct hda_hint *hint = snd_array_elem(&codec->hints, i); + len += snprintf(buf + len, PAGE_SIZE - len, + "%s = %s\n", hint->key, hint->val); + } + return len; +} + static struct hda_hint *get_hint(struct hda_codec *codec, const char *key) { int i; @@ -466,8 +497,8 @@ static struct device_attribute codec_attrs[] = { CODEC_ATTR_RO(mfg), CODEC_ATTR_RW(name), CODEC_ATTR_RW(modelname), - CODEC_ATTR_WO(init_verbs), - CODEC_ATTR_WO(hints), + CODEC_ATTR_RW(init_verbs), + CODEC_ATTR_RW(hints), CODEC_ATTR_RO(init_pin_configs), CODEC_ATTR_RW(user_pin_configs), CODEC_ATTR_RO(driver_pin_configs), -- cgit v1.2.3 From d78d7a90adf793943cc29a414b6f4364a700aad5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 14:26:25 +0100 Subject: ALSA: hda - Create "Analog Loopback" controls optionally Don't create "Analog Loopback" controls as default since these controls are usually more harmful than useful for normal users. Only created when "loopback = yes" hint is given. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 56 ++++++++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 13 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 13056429aa64..7381325b98ff 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -190,6 +190,7 @@ struct sigmatel_spec { unsigned int stream_delay; /* analog loopback */ + struct snd_kcontrol_new *aloopback_ctl; unsigned char aloopback_mask; unsigned char aloopback_shift; @@ -1013,8 +1014,6 @@ static struct snd_kcontrol_new stac92hd73xx_6ch_mixer[] = { HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT), HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT), - STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 3), - HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT), @@ -1024,9 +1023,22 @@ static struct snd_kcontrol_new stac92hd73xx_6ch_mixer[] = { { } /* end */ }; -static struct snd_kcontrol_new stac92hd73xx_8ch_mixer[] = { +static struct snd_kcontrol_new stac92hd73xx_6ch_loopback[] = { + STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 3), + {} +}; + +static struct snd_kcontrol_new stac92hd73xx_8ch_loopback[] = { STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 4), + {} +}; +static struct snd_kcontrol_new stac92hd73xx_10ch_loopback[] = { + STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 5), + {} +}; + +static struct snd_kcontrol_new stac92hd73xx_8ch_mixer[] = { HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT), @@ -1051,8 +1063,6 @@ static struct snd_kcontrol_new stac92hd73xx_8ch_mixer[] = { }; static struct snd_kcontrol_new stac92hd73xx_10ch_mixer[] = { - STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 5), - HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT), @@ -1104,8 +1114,6 @@ static struct snd_kcontrol_new stac92hd83xxx_mixer[] = { }; static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = { - STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2), - HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT), @@ -1131,9 +1139,11 @@ static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = { { } /* end */ }; -static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { - STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2), +static struct snd_kcontrol_new stac92hd71bxx_loopback[] = { + STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2) +}; +static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT), @@ -1151,8 +1161,6 @@ static struct snd_kcontrol_new stac925x_mixer[] = { }; static struct snd_kcontrol_new stac9205_mixer[] = { - STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0, 1), - HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1d, 0x0, HDA_OUTPUT), @@ -1161,6 +1169,11 @@ static struct snd_kcontrol_new stac9205_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new stac9205_loopback[] = { + STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0, 1), + {} +}; + /* This needs to be generated dynamically based on sequence */ static struct snd_kcontrol_new stac922x_mixer[] = { HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT), @@ -1173,8 +1186,6 @@ static struct snd_kcontrol_new stac922x_mixer[] = { static struct snd_kcontrol_new stac927x_mixer[] = { - STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1), - HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1b, 0x0, HDA_OUTPUT), @@ -1186,6 +1197,11 @@ static struct snd_kcontrol_new stac927x_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new stac927x_loopback[] = { + STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1), + {} +}; + static struct snd_kcontrol_new stac_dmux_mixer = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Digital Input Source", @@ -1312,6 +1328,13 @@ static int stac92xx_build_controls(struct hda_codec *codec) return err; } + if (spec->aloopback_ctl && + snd_hda_get_bool_hint(codec, "loopback") == 1) { + err = snd_hda_add_new_ctls(codec, spec->aloopback_ctl); + if (err < 0) + return err; + } + stac92xx_free_kctls(codec); /* no longer needed */ /* create jack input elements */ @@ -4618,14 +4641,18 @@ again: case 0x3: /* 6 Channel */ spec->mixer = stac92hd73xx_6ch_mixer; spec->init = stac92hd73xx_6ch_core_init; + spec->aloopback_ctl = stac92hd73xx_6ch_loopback; break; case 0x4: /* 8 Channel */ spec->mixer = stac92hd73xx_8ch_mixer; spec->init = stac92hd73xx_8ch_core_init; + spec->aloopback_ctl = stac92hd73xx_8ch_loopback; break; case 0x5: /* 10 Channel */ spec->mixer = stac92hd73xx_10ch_mixer; spec->init = stac92hd73xx_10ch_core_init; + spec->aloopback_ctl = stac92hd73xx_10ch_loopback; + break; } spec->multiout.dac_nids = spec->dac_nids; @@ -5036,6 +5063,7 @@ again: if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP) snd_hda_sequence_write_cache(codec, unmute_init); + spec->aloopback_ctl = stac92hd71bxx_loopback; spec->aloopback_mask = 0x50; spec->aloopback_shift = 0; @@ -5285,6 +5313,7 @@ static int patch_stac927x(struct hda_codec *codec) } spec->num_pwrs = 0; + spec->aloopback_ctl = stac927x_loopback; spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; spec->eapd_switch = 1; @@ -5364,6 +5393,7 @@ static int patch_stac9205(struct hda_codec *codec) spec->init = stac9205_core_init; spec->mixer = stac9205_mixer; + spec->aloopback_ctl = stac9205_loopback; spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; -- cgit v1.2.3 From 6565e4faca257fc51a4c55199d72e2701ba7e819 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 14:38:35 +0100 Subject: ALSA: hda - Add more hint options for IDT/Sigmatel codecs Allow more options to be set/reset via hwdep hint entry. hp_detect, gpio_mask, gpio_dir, gpio_data, eapd_mask and eapd_switch can be checked. For example, to disable hp_detect on the fly, # echo "hp_detect=0" > /sys/class/sound/hwC0D0/hints Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 7381325b98ff..e9331561a484 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3949,6 +3949,36 @@ static void stac92xx_power_down(struct hda_codec *codec) static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid, int enable); +/* override some hints from the hwdep entry */ +static void stac_store_hints(struct hda_codec *codec) +{ + struct sigmatel_spec *spec = codec->spec; + const char *p; + int val; + + val = snd_hda_get_bool_hint(codec, "hp_detect"); + if (val >= 0) + spec->hp_detect = val; + p = snd_hda_get_hint(codec, "gpio_mask"); + if (p) { + spec->gpio_mask = simple_strtoul(p, NULL, 0); + spec->eapd_mask = spec->gpio_dir = spec->gpio_data = + spec->gpio_mask; + } + p = snd_hda_get_hint(codec, "gpio_dir"); + if (p) + spec->gpio_dir = simple_strtoul(p, NULL, 0) & spec->gpio_mask; + p = snd_hda_get_hint(codec, "gpio_data"); + if (p) + spec->gpio_data = simple_strtoul(p, NULL, 0) & spec->gpio_mask; + p = snd_hda_get_hint(codec, "eapd_mask"); + if (p) + spec->eapd_mask = simple_strtoul(p, NULL, 0) & spec->gpio_mask; + val = snd_hda_get_bool_hint(codec, "eapd_switch"); + if (val >= 0) + spec->eapd_switch = val; +} + static int stac92xx_init(struct hda_codec *codec) { struct sigmatel_spec *spec = codec->spec; @@ -3965,6 +3995,9 @@ static int stac92xx_init(struct hda_codec *codec) spec->adc_nids[i], 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); + /* override some hints */ + stac_store_hints(codec); + /* set up GPIO */ gpio = spec->gpio_data; /* turn on EAPD statically when spec->eapd_switch isn't set. -- cgit v1.2.3 From d02b1f3910f12cfe377a31afebcbbde4f5664b74 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Mar 2009 17:34:51 +0100 Subject: ALSA: hda - Update documetation for hints sysfs entry Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 99958be7b454..c5948f2f9a25 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -365,10 +365,13 @@ modelname:: to this file. init_verbs:: The extra verbs to execute at initialization. You can add a verb by - writing to this file. Pass three numbers: nid, verb and parameter. + writing to this file. Pass three numbers: nid, verb and parameter + (separated with a space). hints:: - Shows hint strings for codec parsers for any use. Right now it's - not used. + Shows / stores hint strings for codec parsers for any use. + Its format is `key = value`. For example, passing `hp_detect = yes` + to IDT/STAC codec parser will result in the disablement of the + headphone detection. init_pin_configs:: Shows the initial pin default config values set by BIOS. driver_pin_configs:: -- cgit v1.2.3 From 93fde774546c947ac8563da431f0a6d47452551d Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 3 Mar 2009 12:16:12 +0900 Subject: sh: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: Paul Mundt --- drivers/sh/maple/maple.c | 11 +++++------ drivers/sh/superhyway/superhyway.c | 4 ++-- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index 4054fe93d6e4..c71bb4b4ce84 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -368,10 +368,8 @@ static void maple_attach_driver(struct maple_device *mdev) /* Do this silently - as not a real device */ function = 0; mdev->driver = &maple_unsupported_device; - sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port); - + dev_set_name(&mdev->dev, "%d:0.port", mdev->port); } else { - matched = bus_for_each_drv(&maple_bus_type, NULL, mdev, maple_check_matching_driver); @@ -381,8 +379,9 @@ static void maple_attach_driver(struct maple_device *mdev) dev_info(&mdev->dev, "no driver found\n"); mdev->driver = &maple_unsupported_device; } - sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port, - mdev->unit, function); + + dev_set_name(&mdev->dev, "%d:0%d.%lX", mdev->port, + mdev->unit, function); } mdev->function = function; @@ -789,7 +788,7 @@ struct bus_type maple_bus_type = { EXPORT_SYMBOL_GPL(maple_bus_type); static struct device maple_bus = { - .bus_id = "maple", + .init_name = "maple", .release = maple_bus_release, }; diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c index 4d0282b821b5..2d9e7f3d5611 100644 --- a/drivers/sh/superhyway/superhyway.c +++ b/drivers/sh/superhyway/superhyway.c @@ -22,7 +22,7 @@ static int superhyway_devices; static struct device superhyway_bus_device = { - .bus_id = "superhyway", + .init_name = "superhyway", }; static void superhyway_device_release(struct device *dev) @@ -83,7 +83,7 @@ int superhyway_add_device(unsigned long base, struct superhyway_device *sdev, dev->id.id = dev->vcr.mod_id; sprintf(dev->name, "SuperHyway device %04x", dev->id.id); - sprintf(dev->dev.bus_id, "%02x", superhyway_devices); + dev_set_name(&dev->dev, "%02x", superhyway_devices); superhyway_devices++; -- cgit v1.2.3 From 55ba99eb211a06709237cb322ecd8c8b6faf6159 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 3 Mar 2009 15:40:25 +0900 Subject: sh: Add support for SH7786 CPU subtype. This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 + arch/sh/include/asm/processor.h | 2 +- arch/sh/include/cpu-sh4/cpu/freq.h | 4 + arch/sh/include/cpu-sh4/cpu/sh7786.h | 192 +++++++ arch/sh/kernel/cpu/sh4/probe.c | 7 + arch/sh/kernel/cpu/sh4a/Makefile | 3 + arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 148 +++++ arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 950 ++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 407 ++++++++++++++ arch/sh/kernel/setup.c | 1 + arch/sh/kernel/timers/timer-tmu.c | 1 + arch/sh/oprofile/common.c | 1 + drivers/serial/sh-sci.c | 4 +- drivers/serial/sh-sci.h | 13 +- 14 files changed, 1734 insertions(+), 6 deletions(-) create mode 100644 arch/sh/include/cpu-sh4/cpu/sh7786.h create mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7786.c create mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7786.c diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 78a01d7d37ef..0ae09683fb21 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -356,6 +356,13 @@ config CPU_SUBTYPE_SH7785 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA +config CPU_SUBTYPE_SH7786 + bool "Support SH7786 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" select CPU_SH4A diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h index 1ef4b24d7619..1fd58b421438 100644 --- a/arch/sh/include/asm/processor.h +++ b/arch/sh/include/asm/processor.h @@ -31,7 +31,7 @@ enum cpu_type { CPU_SH7760, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786, CPU_SH7723, CPU_SHX3, /* SH4AL-DSP types */ diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h index c23af81c2e70..749d1c434337 100644 --- a/arch/sh/include/cpu-sh4/cpu/freq.h +++ b/arch/sh/include/cpu-sh4/cpu/freq.h @@ -29,6 +29,10 @@ #define FRQCR0 0xffc80000 #define FRQCR1 0xffc80004 #define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SH7786) +#define FRQCR0 0xffc40000 +#define FRQCR1 0xffc40004 +#define FRQMR1 0xffc40014 #elif defined(CONFIG_CPU_SUBTYPE_SHX3) #define FRQCR 0xffc00014 #else diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h new file mode 100644 index 000000000000..48688adc0c84 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sh7786.h @@ -0,0 +1,192 @@ +/* + * SH7786 Pinmux + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on sh7785.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __CPU_SH7786_H__ +#define __CPU_SH7786_H__ + +enum { + /* PA */ + GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4, + GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0, + + /* PB */ + GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4, + GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0, + + /* PC */ + GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4, + GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0, + + /* PD */ + GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4, + GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0, + + /* PE */ + GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2, + GPIO_PE1, GPIO_PE0, + + /* PF */ + GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4, + GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0, + + /* PG */ + GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4, + GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0, + + /* PH */ + GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4, + GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0, + + /* PJ */ + GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4, + GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0, + + GPIO_FN_CDE, + GPIO_FN_ETH_MAGIC, + GPIO_FN_DISP, + GPIO_FN_ETH_LINK, + GPIO_FN_DR5, + GPIO_FN_ETH_TX_ER, + GPIO_FN_DR4, + GPIO_FN_ETH_TX_EN, + GPIO_FN_DR3, + GPIO_FN_ETH_TXD3, + GPIO_FN_DR2, + GPIO_FN_ETH_TXD2, + GPIO_FN_DR1, + GPIO_FN_ETH_TXD1, + GPIO_FN_DR0, + GPIO_FN_ETH_TXD0, + GPIO_FN_VSYNC, + GPIO_FN_HSPI_CLK, + GPIO_FN_ODDF, + GPIO_FN_HSPI_CS, + GPIO_FN_DG5, + GPIO_FN_ETH_MDIO, + GPIO_FN_DG4, + GPIO_FN_ETH_RX_CLK, + GPIO_FN_DG3, + GPIO_FN_ETH_MDC, + GPIO_FN_DG2, + GPIO_FN_ETH_COL, + GPIO_FN_DG1, + GPIO_FN_ETH_TX_CLK, + GPIO_FN_DG0, + GPIO_FN_ETH_CRS, + GPIO_FN_DCLKIN, + GPIO_FN_HSPI_RX, + GPIO_FN_HSYNC, + GPIO_FN_HSPI_TX, + GPIO_FN_DB5, + GPIO_FN_ETH_RXD3, + GPIO_FN_DB4, + GPIO_FN_ETH_RXD2, + GPIO_FN_DB3, + GPIO_FN_ETH_RXD1, + GPIO_FN_DB2, + GPIO_FN_ETH_RXD0, + GPIO_FN_DB1, + GPIO_FN_ETH_RX_DV, + GPIO_FN_DB0, + GPIO_FN_ETH_RX_ER, + GPIO_FN_DCLKOUT, + GPIO_FN_SCIF1_SLK, + GPIO_FN_SCIF1_RXD, + GPIO_FN_SCIF1_TXD, + GPIO_FN_DACK1, + GPIO_FN_BACK, + GPIO_FN_FALE, + GPIO_FN_DACK0, + GPIO_FN_FCLE, + GPIO_FN_DREQ1, + GPIO_FN_BREQ, + GPIO_FN_USB_OVC1, + GPIO_FN_DREQ0, + GPIO_FN_USB_OVC0, + GPIO_FN_USB_PENC1, + GPIO_FN_USB_PENC0, + GPIO_FN_HAC1_SDOUT, + GPIO_FN_SSI1_SDATA, + GPIO_FN_SDIF1CMD, + GPIO_FN_HAC1_SDIN, + GPIO_FN_SSI1_SCK, + GPIO_FN_SDIF1CD, + GPIO_FN_HAC1_SYNC, + GPIO_FN_SSI1_WS, + GPIO_FN_SDIF1WP, + GPIO_FN_HAC1_BITCLK, + GPIO_FN_SSI1_CLK, + GPIO_FN_SDIF1CLK, + GPIO_FN_HAC0_SDOUT, + GPIO_FN_SSI0_SDATA, + GPIO_FN_SDIF1D3, + GPIO_FN_HAC0_SDIN, + GPIO_FN_SSI0_SCK, + GPIO_FN_SDIF1D2, + GPIO_FN_HAC0_SYNC, + GPIO_FN_SSI0_WS, + GPIO_FN_SDIF1D1, + GPIO_FN_HAC0_BITCLK, + GPIO_FN_SSI0_CLK, + GPIO_FN_SDIF1D0, + GPIO_FN_SCIF3_SCK, + GPIO_FN_SSI2_SDATA, + GPIO_FN_SCIF3_RXD, + GPIO_FN_TCLK, + GPIO_FN_SSI2_SCK, + GPIO_FN_SCIF3_TXD, + GPIO_FN_HAC_RES, + GPIO_FN_SSI2_WS, + GPIO_FN_DACK3, + GPIO_FN_SDIF0CMD, + GPIO_FN_DACK2, + GPIO_FN_SDIF0CD, + GPIO_FN_DREQ3, + GPIO_FN_SDIF0WP, + GPIO_FN_SCIF0_CTS, + GPIO_FN_DREQ2, + GPIO_FN_SDIF0CLK, + GPIO_FN_SCIF0_RTS, + GPIO_FN_IRL7, + GPIO_FN_SDIF0D3, + GPIO_FN_SCIF0_SCK, + GPIO_FN_IRL6, + GPIO_FN_SDIF0D2, + GPIO_FN_SCIF0_RXD, + GPIO_FN_IRL5, + GPIO_FN_SDIF0D1, + GPIO_FN_SCIF0_TXD, + GPIO_FN_IRL4, + GPIO_FN_SDIF0D0, + GPIO_FN_SCIF5_SCK, + GPIO_FN_FRB, + GPIO_FN_SCIF5_RXD, + GPIO_FN_IOIS16, + GPIO_FN_SCIF5_TXD, + GPIO_FN_CE2B, + GPIO_FN_DRAK3, + GPIO_FN_CE2A, + GPIO_FN_SCIF4_SCK, + GPIO_FN_DRAK2, + GPIO_FN_SSI3_WS, + GPIO_FN_SCIF4_RXD, + GPIO_FN_DRAK1, + GPIO_FN_SSI3_SDATA, + GPIO_FN_FSTATUS, + GPIO_FN_SCIF4_TXD, + GPIO_FN_DRAK0, + GPIO_FN_SSI3_SCK, + GPIO_FN_FSE, +}; + +#endif /* __CPU_SH7786_H__ */ diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 2e42572b1b11..2bd0ec962639 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -129,6 +129,13 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; + case 0x4004: + boot_cpu_data.type = CPU_SH7786; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC; + break; case 0x3008: boot_cpu_data.icache.ways = 4; boot_cpu_data.dcache.ways = 4; diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 8e344ec5847e..1a92361feeb9 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o +obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o @@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o +clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o @@ -31,6 +33,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o +pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o obj-y += $(clock-y) obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c new file mode 100644 index 000000000000..f84a9c134471 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -0,0 +1,148 @@ +/* + * arch/sh/kernel/cpu/sh4a/clock-sh7786.c + * + * SH7786 support for the clock framework + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on SH7785 + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int ifc_divisors[] = { 1, 2, 4, 1 }; +static int sfc_divisors[] = { 1, 1, 4, 1 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 1, + 24, 32, 1, 1, 1, 1, 1, 1 }; +static int mfc_divisors[] = { 1, 1, 4, 1 }; +static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 16, 1, + 24, 32, 1, 48, 1, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f]; +} + +static struct clk_ops sh7786_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQMR1) & 0x000f); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7786_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7786_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7786_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7786_clk_ops[] = { + &sh7786_master_clk_ops, + &sh7786_module_clk_ops, + &sh7786_bus_clk_ops, + &sh7786_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7786_clk_ops)) + *ops = sh7786_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003); + clk->rate = clk->parent->rate / sfc_divisors[idx]; +} + +static struct clk_ops sh7786_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk sh7786_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7786_shyway_clk_ops, +}; + +static void ddr_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003); + clk->rate = clk->parent->rate / mfc_divisors[idx]; +} + +static struct clk_ops sh7786_ddr_clk_ops = { + .recalc = ddr_clk_recalc, +}; + +static struct clk sh7786_ddr_clk = { + .name = "ddr_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7786_ddr_clk_ops, +}; + +/* + * Additional SH7786-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *sh7786_onchip_clocks[] = { + &sh7786_shyway_clk, + &sh7786_ddr_clk, +}; + +static int __init sh7786_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) { + struct clk *clkp = sh7786_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} +arch_initcall(sh7786_clk_init); diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c new file mode 100644 index 000000000000..373b3447bfdf --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c @@ -0,0 +1,950 @@ +/* + * SH7786 Pinmux + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on SH7785 pinmux + * + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA, + PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA, + PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA, + PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, + PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA, + PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA, + PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA, + PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, + PE7_DATA, PE6_DATA, + PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA, + PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, + PG7_DATA, PG6_DATA, PG5_DATA, + PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA, + PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, + PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA, + PJ3_DATA, PJ2_DATA, PJ1_DATA, + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PA7_IN, PA6_IN, PA5_IN, PA4_IN, + PA3_IN, PA2_IN, PA1_IN, PA0_IN, + PB7_IN, PB6_IN, PB5_IN, PB4_IN, + PB3_IN, PB2_IN, PB1_IN, PB0_IN, + PC7_IN, PC6_IN, PC5_IN, PC4_IN, + PC3_IN, PC2_IN, PC1_IN, PC0_IN, + PD7_IN, PD6_IN, PD5_IN, PD4_IN, + PD3_IN, PD2_IN, PD1_IN, PD0_IN, + PE7_IN, PE6_IN, + PF7_IN, PF6_IN, PF5_IN, PF4_IN, + PF3_IN, PF2_IN, PF1_IN, PF0_IN, + PG7_IN, PG6_IN, PG5_IN, + PH7_IN, PH6_IN, PH5_IN, PH4_IN, + PH3_IN, PH2_IN, PH1_IN, PH0_IN, + PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN, + PJ3_IN, PJ2_IN, PJ1_IN, + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU, + PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU, + PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU, + PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU, + PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU, + PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU, + PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU, + PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU, + PE7_IN_PU, PE6_IN_PU, + PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU, + PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU, + PG7_IN_PU, PG6_IN_PU, PG5_IN_PU, + PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU, + PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU, + PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU, + PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU, + PINMUX_INPUT_PULLUP_END, + + PINMUX_OUTPUT_BEGIN, + PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT, + PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT, + PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT, + PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT, + PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT, + PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT, + PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT, + PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT, + PE7_OUT, PE6_OUT, + PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT, + PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT, + PG7_OUT, PG6_OUT, PG5_OUT, + PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT, + PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT, + PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT, + PJ3_OUT, PJ2_OUT, PJ1_OUT, + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PA7_FN, PA6_FN, PA5_FN, PA4_FN, + PA3_FN, PA2_FN, PA1_FN, PA0_FN, + PB7_FN, PB6_FN, PB5_FN, PB4_FN, + PB3_FN, PB2_FN, PB1_FN, PB0_FN, + PC7_FN, PC6_FN, PC5_FN, PC4_FN, + PC3_FN, PC2_FN, PC1_FN, PC0_FN, + PD7_FN, PD6_FN, PD5_FN, PD4_FN, + PD3_FN, PD2_FN, PD1_FN, PD0_FN, + PE7_FN, PE6_FN, + PF7_FN, PF6_FN, PF5_FN, PF4_FN, + PF3_FN, PF2_FN, PF1_FN, PF0_FN, + PG7_FN, PG6_FN, PG5_FN, + PH7_FN, PH6_FN, PH5_FN, PH4_FN, + PH3_FN, PH2_FN, PH1_FN, PH0_FN, + PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN, + PJ3_FN, PJ2_FN, PJ1_FN, + P1MSEL14_0, P1MSEL14_1, + P1MSEL13_0, P1MSEL13_1, + P1MSEL12_0, P1MSEL12_1, + P1MSEL11_0, P1MSEL11_1, + P1MSEL10_0, P1MSEL10_1, + P1MSEL9_0, P1MSEL9_1, + P1MSEL8_0, P1MSEL8_1, + P1MSEL7_0, P1MSEL7_1, + P1MSEL6_0, P1MSEL6_1, + P1MSEL5_0, P1MSEL5_1, + P1MSEL4_0, P1MSEL4_1, + P1MSEL3_0, P1MSEL3_1, + P1MSEL2_0, P1MSEL2_1, + P1MSEL1_0, P1MSEL1_1, + P1MSEL0_0, P1MSEL0_1, + + P2MSEL15_0, P2MSEL15_1, + P2MSEL14_0, P2MSEL14_1, + P2MSEL13_0, P2MSEL13_1, + P2MSEL12_0, P2MSEL12_1, + P2MSEL11_0, P2MSEL11_1, + P2MSEL10_0, P2MSEL10_1, + P2MSEL9_0, P2MSEL9_1, + P2MSEL8_0, P2MSEL8_1, + P2MSEL7_0, P2MSEL7_1, + P2MSEL6_0, P2MSEL6_1, + P2MSEL5_0, P2MSEL5_1, + P2MSEL4_0, P2MSEL4_1, + P2MSEL3_0, P2MSEL3_1, + P2MSEL2_0, P2MSEL2_1, + P2MSEL1_0, P2MSEL1_1, + P2MSEL0_0, P2MSEL0_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + CDE_MARK, + ETH_MAGIC_MARK, + DISP_MARK, + ETH_LINK_MARK, + DR5_MARK, + ETH_TX_ER_MARK, + DR4_MARK, + ETH_TX_EN_MARK, + DR3_MARK, + ETH_TXD3_MARK, + DR2_MARK, + ETH_TXD2_MARK, + DR1_MARK, + ETH_TXD1_MARK, + DR0_MARK, + ETH_TXD0_MARK, + + VSYNC_MARK, + HSPI_CLK_MARK, + ODDF_MARK, + HSPI_CS_MARK, + DG5_MARK, + ETH_MDIO_MARK, + DG4_MARK, + ETH_RX_CLK_MARK, + DG3_MARK, + ETH_MDC_MARK, + DG2_MARK, + ETH_COL_MARK, + DG1_MARK, + ETH_TX_CLK_MARK, + DG0_MARK, + ETH_CRS_MARK, + + DCLKIN_MARK, + HSPI_RX_MARK, + HSYNC_MARK, + HSPI_TX_MARK, + DB5_MARK, + ETH_RXD3_MARK, + DB4_MARK, + ETH_RXD2_MARK, + DB3_MARK, + ETH_RXD1_MARK, + DB2_MARK, + ETH_RXD0_MARK, + DB1_MARK, + ETH_RX_DV_MARK, + DB0_MARK, + ETH_RX_ER_MARK, + + DCLKOUT_MARK, + SCIF1_SLK_MARK, + SCIF1_RXD_MARK, + SCIF1_TXD_MARK, + DACK1_MARK, + BACK_MARK, + FALE_MARK, + DACK0_MARK, + FCLE_MARK, + DREQ1_MARK, + BREQ_MARK, + USB_OVC1_MARK, + DREQ0_MARK, + USB_OVC0_MARK, + + USB_PENC1_MARK, + USB_PENC0_MARK, + + HAC1_SDOUT_MARK, + SSI1_SDATA_MARK, + SDIF1CMD_MARK, + HAC1_SDIN_MARK, + SSI1_SCK_MARK, + SDIF1CD_MARK, + HAC1_SYNC_MARK, + SSI1_WS_MARK, + SDIF1WP_MARK, + HAC1_BITCLK_MARK, + SSI1_CLK_MARK, + SDIF1CLK_MARK, + HAC0_SDOUT_MARK, + SSI0_SDATA_MARK, + SDIF1D3_MARK, + HAC0_SDIN_MARK, + SSI0_SCK_MARK, + SDIF1D2_MARK, + HAC0_SYNC_MARK, + SSI0_WS_MARK, + SDIF1D1_MARK, + HAC0_BITCLK_MARK, + SSI0_CLK_MARK, + SDIF1D0_MARK, + + SCIF3_SCK_MARK, + SSI2_SDATA_MARK, + SCIF3_RXD_MARK, + TCLK_MARK, + SSI2_SCK_MARK, + SCIF3_TXD_MARK, + HAC_RES_MARK, + SSI2_WS_MARK, + + DACK3_MARK, + SDIF0CMD_MARK, + DACK2_MARK, + SDIF0CD_MARK, + DREQ3_MARK, + SDIF0WP_MARK, + SCIF0_CTS_MARK, + DREQ2_MARK, + SDIF0CLK_MARK, + SCIF0_RTS_MARK, + IRL7_MARK, + SDIF0D3_MARK, + SCIF0_SCK_MARK, + IRL6_MARK, + SDIF0D2_MARK, + SCIF0_RXD_MARK, + IRL5_MARK, + SDIF0D1_MARK, + SCIF0_TXD_MARK, + IRL4_MARK, + SDIF0D0_MARK, + + SCIF5_SCK_MARK, + FRB_MARK, + SCIF5_RXD_MARK, + IOIS16_MARK, + SCIF5_TXD_MARK, + CE2B_MARK, + DRAK3_MARK, + CE2A_MARK, + SCIF4_SCK_MARK, + DRAK2_MARK, + SSI3_WS_MARK, + SCIF4_RXD_MARK, + DRAK1_MARK, + SSI3_SDATA_MARK, + FSTATUS_MARK, + SCIF4_TXD_MARK, + DRAK0_MARK, + SSI3_SCK_MARK, + FSE_MARK, + PINMUX_MARK_END, +}; + +static pinmux_enum_t pinmux_data[] = { + + /* PA GPIO */ + PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU), + PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU), + PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU), + PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU), + PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU), + PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU), + PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU), + PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU), + + /* PB GPIO */ + PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU), + PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU), + PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU), + PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU), + PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU), + PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU), + PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU), + PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU), + + /* PC GPIO */ + PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU), + PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU), + PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU), + PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU), + PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU), + PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU), + PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU), + PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU), + + /* PD GPIO */ + PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU), + PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU), + PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU), + PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU), + PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU), + PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU), + PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU), + PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU), + + /* PE GPIO */ + PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT, PE7_IN_PU), + PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT, PE6_IN_PU), + + /* PF GPIO */ + PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU), + PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU), + PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU), + PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU), + PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU), + PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU), + PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU), + PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU), + + /* PG GPIO */ + PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU), + PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU), + PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU), + + /* PH GPIO */ + PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU), + PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU), + PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU), + PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU), + PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU), + PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU), + PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU), + PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU), + + /* PJ GPIO */ + PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU), + PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU), + PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU), + PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU), + PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU), + PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU), + PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU), + + /* PA FN */ + PINMUX_MARK_BEGIN, + PINMUX_DATA(CDE_MARK, P1MSEL2_0, PA7_FN), + PINMUX_DATA(DISP_MARK, P1MSEL2_0, PA6_FN), + PINMUX_DATA(DR5_MARK, P1MSEL2_0, PA5_FN), + PINMUX_DATA(DR4_MARK, P1MSEL2_0, PA4_FN), + PINMUX_DATA(DR3_MARK, P1MSEL2_0, PA3_FN), + PINMUX_DATA(DR2_MARK, P1MSEL2_0, PA2_FN), + PINMUX_DATA(DR1_MARK, P1MSEL2_0, PA1_FN), + PINMUX_DATA(DR0_MARK, P1MSEL2_0, PA0_FN), + PINMUX_DATA(ETH_MAGIC_MARK, P1MSEL2_1, PA7_FN), + PINMUX_DATA(ETH_LINK_MARK, P1MSEL2_1, PA6_FN), + PINMUX_DATA(ETH_TX_ER_MARK, P1MSEL2_1, PA5_FN), + PINMUX_DATA(ETH_TX_EN_MARK, P1MSEL2_1, PA4_FN), + PINMUX_DATA(ETH_TXD3_MARK, P1MSEL2_1, PA3_FN), + PINMUX_DATA(ETH_TXD2_MARK, P1MSEL2_1, PA2_FN), + PINMUX_DATA(ETH_TXD1_MARK, P1MSEL2_1, PA1_FN), + PINMUX_DATA(ETH_TXD0_MARK, P1MSEL2_1, PA0_FN), + + /* PB FN */ + PINMUX_DATA(VSYNC_MARK, P1MSEL3_0, PB7_FN), + PINMUX_DATA(ODDF_MARK, P1MSEL3_0, PB6_FN), + PINMUX_DATA(DG5_MARK, P1MSEL2_0, PB5_FN), + PINMUX_DATA(DG4_MARK, P1MSEL2_0, PB4_FN), + PINMUX_DATA(DG3_MARK, P1MSEL2_0, PB3_FN), + PINMUX_DATA(DG2_MARK, P1MSEL2_0, PB2_FN), + PINMUX_DATA(DG1_MARK, P1MSEL2_0, PB1_FN), + PINMUX_DATA(DG0_MARK, P1MSEL2_0, PB0_FN), + PINMUX_DATA(HSPI_CLK_MARK, P1MSEL3_1, PB7_FN), + PINMUX_DATA(HSPI_CS_MARK, P1MSEL3_1, PB6_FN), + PINMUX_DATA(ETH_MDIO_MARK, P1MSEL2_1, PB5_FN), + PINMUX_DATA(ETH_RX_CLK_MARK, P1MSEL2_1, PB4_FN), + PINMUX_DATA(ETH_MDC_MARK, P1MSEL2_1, PB3_FN), + PINMUX_DATA(ETH_COL_MARK, P1MSEL2_1, PB2_FN), + PINMUX_DATA(ETH_TX_CLK_MARK, P1MSEL2_1, PB1_FN), + PINMUX_DATA(ETH_CRS_MARK, P1MSEL2_1, PB0_FN), + + /* PC FN */ + PINMUX_DATA(DCLKIN_MARK, P1MSEL3_0, PC7_FN), + PINMUX_DATA(HSYNC_MARK, P1MSEL3_0, PC6_FN), + PINMUX_DATA(DB5_MARK, P1MSEL2_0, PC5_FN), + PINMUX_DATA(DB4_MARK, P1MSEL2_0, PC4_FN), + PINMUX_DATA(DB3_MARK, P1MSEL2_0, PC3_FN), + PINMUX_DATA(DB2_MARK, P1MSEL2_0, PC2_FN), + PINMUX_DATA(DB1_MARK, P1MSEL2_0, PC1_FN), + PINMUX_DATA(DB0_MARK, P1MSEL2_0, PC0_FN), + + PINMUX_DATA(HSPI_RX_MARK, P1MSEL3_1, PC7_FN), + PINMUX_DATA(HSPI_TX_MARK, P1MSEL3_1, PC6_FN), + PINMUX_DATA(ETH_RXD3_MARK, P1MSEL2_1, PC5_FN), + PINMUX_DATA(ETH_RXD2_MARK, P1MSEL2_1, PC4_FN), + PINMUX_DATA(ETH_RXD1_MARK, P1MSEL2_1, PC3_FN), + PINMUX_DATA(ETH_RXD0_MARK, P1MSEL2_1, PC2_FN), + PINMUX_DATA(ETH_RX_DV_MARK, P1MSEL2_1, PC1_FN), + PINMUX_DATA(ETH_RX_ER_MARK, P1MSEL2_1, PC0_FN), + + /* PD FN */ + PINMUX_DATA(DCLKOUT_MARK, PD7_FN), + PINMUX_DATA(SCIF1_SLK_MARK, PD6_FN), + PINMUX_DATA(SCIF1_RXD_MARK, PD5_FN), + PINMUX_DATA(SCIF1_TXD_MARK, PD4_FN), + PINMUX_DATA(DACK1_MARK, P1MSEL13_1, P1MSEL12_0, PD3_FN), + PINMUX_DATA(BACK_MARK, P1MSEL13_0, P1MSEL12_1, PD3_FN), + PINMUX_DATA(FALE_MARK, P1MSEL13_0, P1MSEL12_0, PD3_FN), + PINMUX_DATA(DACK0_MARK, P1MSEL14_1, PD2_FN), + PINMUX_DATA(FCLE_MARK, P1MSEL14_0, PD2_FN), + PINMUX_DATA(DREQ1_MARK, P1MSEL10_0, P1MSEL9_1, PD1_FN), + PINMUX_DATA(BREQ_MARK, P1MSEL10_1, P1MSEL9_0, PD1_FN), + PINMUX_DATA(USB_OVC1_MARK, P1MSEL10_0, P1MSEL9_0, PD1_FN), + PINMUX_DATA(DREQ0_MARK, P1MSEL11_1, PD0_FN), + PINMUX_DATA(USB_OVC0_MARK, P1MSEL11_0, PD0_FN), + + /* PE FN */ + PINMUX_DATA(USB_PENC1_MARK, PE7_FN), + PINMUX_DATA(USB_PENC0_MARK, PE6_FN), + + /* PF FN */ + PINMUX_DATA(HAC1_SDOUT_MARK, P2MSEL15_0, P2MSEL14_0, PF7_FN), + PINMUX_DATA(HAC1_SDIN_MARK, P2MSEL15_0, P2MSEL14_0, PF6_FN), + PINMUX_DATA(HAC1_SYNC_MARK, P2MSEL15_0, P2MSEL14_0, PF5_FN), + PINMUX_DATA(HAC1_BITCLK_MARK, P2MSEL15_0, P2MSEL14_0, PF4_FN), + PINMUX_DATA(HAC0_SDOUT_MARK, P2MSEL13_0, P2MSEL12_0, PF3_FN), + PINMUX_DATA(HAC0_SDIN_MARK, P2MSEL13_0, P2MSEL12_0, PF2_FN), + PINMUX_DATA(HAC0_SYNC_MARK, P2MSEL13_0, P2MSEL12_0, PF1_FN), + PINMUX_DATA(HAC0_BITCLK_MARK, P2MSEL13_0, P2MSEL12_0, PF0_FN), + PINMUX_DATA(SSI1_SDATA_MARK, P2MSEL15_0, P2MSEL14_1, PF7_FN), + PINMUX_DATA(SSI1_SCK_MARK, P2MSEL15_0, P2MSEL14_1, PF6_FN), + PINMUX_DATA(SSI1_WS_MARK, P2MSEL15_0, P2MSEL14_1, PF5_FN), + PINMUX_DATA(SSI1_CLK_MARK, P2MSEL15_0, P2MSEL14_1, PF4_FN), + PINMUX_DATA(SSI0_SDATA_MARK, P2MSEL13_0, P2MSEL12_1, PF3_FN), + PINMUX_DATA(SSI0_SCK_MARK, P2MSEL13_0, P2MSEL12_1, PF2_FN), + PINMUX_DATA(SSI0_WS_MARK, P2MSEL13_0, P2MSEL12_1, PF1_FN), + PINMUX_DATA(SSI0_CLK_MARK, P2MSEL13_0, P2MSEL12_1, PF0_FN), + PINMUX_DATA(SDIF1CMD_MARK, P2MSEL15_1, P2MSEL14_0, PF7_FN), + PINMUX_DATA(SDIF1CD_MARK, P2MSEL15_1, P2MSEL14_0, PF6_FN), + PINMUX_DATA(SDIF1WP_MARK, P2MSEL15_1, P2MSEL14_0, PF5_FN), + PINMUX_DATA(SDIF1CLK_MARK, P2MSEL15_1, P2MSEL14_0, PF4_FN), + PINMUX_DATA(SDIF1D3_MARK, P2MSEL13_1, P2MSEL12_0, PF3_FN), + PINMUX_DATA(SDIF1D2_MARK, P2MSEL13_1, P2MSEL12_0, PF2_FN), + PINMUX_DATA(SDIF1D1_MARK, P2MSEL13_1, P2MSEL12_0, PF1_FN), + PINMUX_DATA(SDIF1D0_MARK, P2MSEL13_1, P2MSEL12_0, PF0_FN), + + /* PG FN */ + PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL8_0, PG7_FN), + PINMUX_DATA(SSI2_SDATA_MARK, P1MSEL8_1, PG7_FN), + PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL7_0, P1MSEL6_0, PG6_FN), + PINMUX_DATA(SSI2_SCK_MARK, P1MSEL7_1, P1MSEL6_0, PG6_FN), + PINMUX_DATA(TCLK_MARK, P1MSEL7_0, P1MSEL6_1, PG6_FN), + PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL5_0, P1MSEL4_0, PG5_FN), + PINMUX_DATA(SSI2_WS_MARK, P1MSEL5_1, P1MSEL4_0, PG5_FN), + PINMUX_DATA(HAC_RES_MARK, P1MSEL5_0, P1MSEL4_1, PG5_FN), + + /* PH FN */ + PINMUX_DATA(DACK3_MARK, P2MSEL4_0, PH7_FN), + PINMUX_DATA(SDIF0CMD_MARK, P2MSEL4_1, PH7_FN), + PINMUX_DATA(DACK2_MARK, P2MSEL4_0, PH6_FN), + PINMUX_DATA(SDIF0CD_MARK, P2MSEL4_1, PH6_FN), + PINMUX_DATA(DREQ3_MARK, P2MSEL4_0, PH5_FN), + PINMUX_DATA(SDIF0WP_MARK, P2MSEL4_1, PH5_FN), + PINMUX_DATA(DREQ2_MARK, P2MSEL3_0, P2MSEL2_1, PH4_FN), + PINMUX_DATA(SDIF0CLK_MARK, P2MSEL3_1, P2MSEL2_0, PH4_FN), + PINMUX_DATA(SCIF0_CTS_MARK, P2MSEL3_0, P2MSEL2_0, PH4_FN), + PINMUX_DATA(SDIF0D3_MARK, P2MSEL1_1, P2MSEL0_0, PH3_FN), + PINMUX_DATA(SCIF0_RTS_MARK, P2MSEL1_0, P2MSEL0_0, PH3_FN), + PINMUX_DATA(IRL7_MARK, P2MSEL1_0, P2MSEL0_1, PH3_FN), + PINMUX_DATA(SDIF0D2_MARK, P2MSEL1_1, P2MSEL0_0, PH2_FN), + PINMUX_DATA(SCIF0_SCK_MARK, P2MSEL1_0, P2MSEL0_0, PH2_FN), + PINMUX_DATA(IRL6_MARK, P2MSEL1_0, P2MSEL0_1, PH2_FN), + PINMUX_DATA(SDIF0D1_MARK, P2MSEL1_1, P2MSEL0_0, PH1_FN), + PINMUX_DATA(SCIF0_RXD_MARK, P2MSEL1_0, P2MSEL0_0, PH1_FN), + PINMUX_DATA(IRL5_MARK, P2MSEL1_0, P2MSEL0_1, PH1_FN), + PINMUX_DATA(SDIF0D0_MARK, P2MSEL1_1, P2MSEL0_0, PH0_FN), + PINMUX_DATA(SCIF0_TXD_MARK, P2MSEL1_0, P2MSEL0_0, PH0_FN), + PINMUX_DATA(IRL4_MARK, P2MSEL1_0, P2MSEL0_1, PH0_FN), + + /* PJ FN */ + PINMUX_DATA(SCIF5_SCK_MARK, P2MSEL11_1, PJ7_FN), + PINMUX_DATA(FRB_MARK, P2MSEL11_0, PJ7_FN), + PINMUX_DATA(SCIF5_RXD_MARK, P2MSEL10_0, PJ6_FN), + PINMUX_DATA(IOIS16_MARK, P2MSEL10_1, PJ6_FN), + PINMUX_DATA(SCIF5_TXD_MARK, P2MSEL10_0, PJ5_FN), + PINMUX_DATA(CE2B_MARK, P2MSEL10_1, PJ5_FN), + PINMUX_DATA(DRAK3_MARK, P2MSEL7_0, PJ4_FN), + PINMUX_DATA(CE2A_MARK, P2MSEL7_1, PJ4_FN), + PINMUX_DATA(SCIF4_SCK_MARK, P2MSEL9_0, P2MSEL8_0, PJ3_FN), + PINMUX_DATA(DRAK2_MARK, P2MSEL9_0, P2MSEL8_1, PJ3_FN), + PINMUX_DATA(SSI3_WS_MARK, P2MSEL9_1, P2MSEL8_0, PJ3_FN), + PINMUX_DATA(SCIF4_RXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ2_FN), + PINMUX_DATA(DRAK1_MARK, P2MSEL6_0, P2MSEL5_1, PJ2_FN), + PINMUX_DATA(FSTATUS_MARK, P2MSEL6_0, P2MSEL5_0, PJ2_FN), + PINMUX_DATA(SSI3_SDATA_MARK, P2MSEL6_1, P2MSEL5_1, PJ2_FN), + PINMUX_DATA(SCIF4_TXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ1_FN), + PINMUX_DATA(DRAK0_MARK, P2MSEL6_0, P2MSEL5_1, PJ1_FN), + PINMUX_DATA(FSE_MARK, P2MSEL6_0, P2MSEL5_0, PJ1_FN), + PINMUX_DATA(SSI3_SCK_MARK, P2MSEL6_1, P2MSEL5_1, PJ1_FN), +}; + +static struct pinmux_gpio pinmux_gpios[] = { + /* PA */ + PINMUX_GPIO(GPIO_PA7, PA7_DATA), + PINMUX_GPIO(GPIO_PA6, PA6_DATA), + PINMUX_GPIO(GPIO_PA5, PA5_DATA), + PINMUX_GPIO(GPIO_PA4, PA4_DATA), + PINMUX_GPIO(GPIO_PA3, PA3_DATA), + PINMUX_GPIO(GPIO_PA2, PA2_DATA), + PINMUX_GPIO(GPIO_PA1, PA1_DATA), + PINMUX_GPIO(GPIO_PA0, PA0_DATA), + + /* PB */ + PINMUX_GPIO(GPIO_PB7, PB7_DATA), + PINMUX_GPIO(GPIO_PB6, PB6_DATA), + PINMUX_GPIO(GPIO_PB5, PB5_DATA), + PINMUX_GPIO(GPIO_PB4, PB4_DATA), + PINMUX_GPIO(GPIO_PB3, PB3_DATA), + PINMUX_GPIO(GPIO_PB2, PB2_DATA), + PINMUX_GPIO(GPIO_PB1, PB1_DATA), + PINMUX_GPIO(GPIO_PB0, PB0_DATA), + + /* PC */ + PINMUX_GPIO(GPIO_PC7, PC7_DATA), + PINMUX_GPIO(GPIO_PC6, PC6_DATA), + PINMUX_GPIO(GPIO_PC5, PC5_DATA), + PINMUX_GPIO(GPIO_PC4, PC4_DATA), + PINMUX_GPIO(GPIO_PC3, PC3_DATA), + PINMUX_GPIO(GPIO_PC2, PC2_DATA), + PINMUX_GPIO(GPIO_PC1, PC1_DATA), + PINMUX_GPIO(GPIO_PC0, PC0_DATA), + + /* PD */ + PINMUX_GPIO(GPIO_PD7, PD7_DATA), + PINMUX_GPIO(GPIO_PD6, PD6_DATA), + PINMUX_GPIO(GPIO_PD5, PD5_DATA), + PINMUX_GPIO(GPIO_PD4, PD4_DATA), + PINMUX_GPIO(GPIO_PD3, PD3_DATA), + PINMUX_GPIO(GPIO_PD2, PD2_DATA), + PINMUX_GPIO(GPIO_PD1, PD1_DATA), + PINMUX_GPIO(GPIO_PD0, PD0_DATA), + + /* PE */ + PINMUX_GPIO(GPIO_PE5, PE7_DATA), + PINMUX_GPIO(GPIO_PE4, PE6_DATA), + + /* PF */ + PINMUX_GPIO(GPIO_PF7, PF7_DATA), + PINMUX_GPIO(GPIO_PF6, PF6_DATA), + PINMUX_GPIO(GPIO_PF5, PF5_DATA), + PINMUX_GPIO(GPIO_PF4, PF4_DATA), + PINMUX_GPIO(GPIO_PF3, PF3_DATA), + PINMUX_GPIO(GPIO_PF2, PF2_DATA), + PINMUX_GPIO(GPIO_PF1, PF1_DATA), + PINMUX_GPIO(GPIO_PF0, PF0_DATA), + + /* PG */ + PINMUX_GPIO(GPIO_PG7, PG7_DATA), + PINMUX_GPIO(GPIO_PG6, PG6_DATA), + PINMUX_GPIO(GPIO_PG5, PG5_DATA), + + /* PH */ + PINMUX_GPIO(GPIO_PH7, PH7_DATA), + PINMUX_GPIO(GPIO_PH6, PH6_DATA), + PINMUX_GPIO(GPIO_PH5, PH5_DATA), + PINMUX_GPIO(GPIO_PH4, PH4_DATA), + PINMUX_GPIO(GPIO_PH3, PH3_DATA), + PINMUX_GPIO(GPIO_PH2, PH2_DATA), + PINMUX_GPIO(GPIO_PH1, PH1_DATA), + PINMUX_GPIO(GPIO_PH0, PH0_DATA), + + /* PJ */ + PINMUX_GPIO(GPIO_PJ7, PJ7_DATA), + PINMUX_GPIO(GPIO_PJ6, PJ6_DATA), + PINMUX_GPIO(GPIO_PJ5, PJ5_DATA), + PINMUX_GPIO(GPIO_PJ4, PJ4_DATA), + PINMUX_GPIO(GPIO_PJ3, PJ3_DATA), + PINMUX_GPIO(GPIO_PJ2, PJ2_DATA), + PINMUX_GPIO(GPIO_PJ1, PJ1_DATA), + + /* FN */ + PINMUX_GPIO(GPIO_FN_CDE, CDE_MARK), + PINMUX_GPIO(GPIO_FN_ETH_MAGIC, ETH_MAGIC_MARK), + PINMUX_GPIO(GPIO_FN_DISP, DISP_MARK), + PINMUX_GPIO(GPIO_FN_ETH_LINK, ETH_LINK_MARK), + PINMUX_GPIO(GPIO_FN_DR5, DR5_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TX_ER, ETH_TX_ER_MARK), + PINMUX_GPIO(GPIO_FN_DR4, DR4_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TX_EN, ETH_TX_EN_MARK), + PINMUX_GPIO(GPIO_FN_DR3, DR3_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD3, ETH_TXD3_MARK), + PINMUX_GPIO(GPIO_FN_DR2, DR2_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD2, ETH_TXD2_MARK), + PINMUX_GPIO(GPIO_FN_DR1, DR1_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD1, ETH_TXD1_MARK), + PINMUX_GPIO(GPIO_FN_DR0, DR0_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD0, ETH_TXD0_MARK), + PINMUX_GPIO(GPIO_FN_VSYNC, VSYNC_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_CLK, HSPI_CLK_MARK), + PINMUX_GPIO(GPIO_FN_ODDF, ODDF_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_CS, HSPI_CS_MARK), + PINMUX_GPIO(GPIO_FN_DG5, DG5_MARK), + PINMUX_GPIO(GPIO_FN_ETH_MDIO, ETH_MDIO_MARK), + PINMUX_GPIO(GPIO_FN_DG4, DG4_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RX_CLK, ETH_RX_CLK_MARK), + PINMUX_GPIO(GPIO_FN_DG3, DG3_MARK), + PINMUX_GPIO(GPIO_FN_ETH_MDC, ETH_MDC_MARK), + PINMUX_GPIO(GPIO_FN_DG2, DG2_MARK), + PINMUX_GPIO(GPIO_FN_ETH_COL, ETH_COL_MARK), + PINMUX_GPIO(GPIO_FN_DG1, DG1_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TX_CLK, ETH_TX_CLK_MARK), + PINMUX_GPIO(GPIO_FN_DG0, DG0_MARK), + PINMUX_GPIO(GPIO_FN_ETH_CRS, ETH_CRS_MARK), + PINMUX_GPIO(GPIO_FN_DCLKIN, DCLKIN_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_RX, HSPI_RX_MARK), + PINMUX_GPIO(GPIO_FN_HSYNC, HSYNC_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_TX, HSPI_TX_MARK), + PINMUX_GPIO(GPIO_FN_DB5, DB5_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD3, ETH_RXD3_MARK), + PINMUX_GPIO(GPIO_FN_DB4, DB4_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD2, ETH_RXD2_MARK), + PINMUX_GPIO(GPIO_FN_DB3, DB3_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD1, ETH_RXD1_MARK), + PINMUX_GPIO(GPIO_FN_DB2, DB2_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD0, ETH_RXD0_MARK), + PINMUX_GPIO(GPIO_FN_DB1, DB1_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RX_DV, ETH_RX_DV_MARK), + PINMUX_GPIO(GPIO_FN_DB0, DB0_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RX_ER, ETH_RX_ER_MARK), + PINMUX_GPIO(GPIO_FN_DCLKOUT, DCLKOUT_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_SLK, SCIF1_SLK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK), + PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK), + PINMUX_GPIO(GPIO_FN_BACK, BACK_MARK), + PINMUX_GPIO(GPIO_FN_FALE, FALE_MARK), + PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK), + PINMUX_GPIO(GPIO_FN_FCLE, FCLE_MARK), + PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK), + PINMUX_GPIO(GPIO_FN_BREQ, BREQ_MARK), + PINMUX_GPIO(GPIO_FN_USB_OVC1, USB_OVC1_MARK), + PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK), + PINMUX_GPIO(GPIO_FN_USB_OVC0, USB_OVC0_MARK), + PINMUX_GPIO(GPIO_FN_USB_PENC1, USB_PENC1_MARK), + PINMUX_GPIO(GPIO_FN_USB_PENC0, USB_PENC0_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SDOUT, HAC1_SDOUT_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_SDATA, SSI1_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1CMD, SDIF1CMD_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SDIN, HAC1_SDIN_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_SCK, SSI1_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1CD, SDIF1CD_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SYNC, HAC1_SYNC_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_WS, SSI1_WS_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1WP, SDIF1WP_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_BITCLK, HAC1_BITCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_CLK, SSI1_CLK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1CLK, SDIF1CLK_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SDOUT, HAC0_SDOUT_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_SDATA, SSI0_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D3, SDIF1D3_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SDIN, HAC0_SDIN_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_SCK, SSI0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D2, SDIF1D2_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SYNC, HAC0_SYNC_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_WS, SSI0_WS_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D1, SDIF1D1_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_BITCLK, HAC0_BITCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_CLK, SSI0_CLK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D0, SDIF1D0_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_SCK, SCIF3_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SSI2_SDATA, SSI2_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_RXD, SCIF3_RXD_MARK), + PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI2_SCK, SSI2_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_TXD, SCIF3_TXD_MARK), + PINMUX_GPIO(GPIO_FN_HAC_RES, HAC_RES_MARK), + PINMUX_GPIO(GPIO_FN_SSI2_WS, SSI2_WS_MARK), + PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0CMD, SDIF0CMD_MARK), + PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0CD, SDIF0CD_MARK), + PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0WP, SDIF0WP_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK), + PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0CLK, SDIF0CLK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK), + PINMUX_GPIO(GPIO_FN_IRL7, IRL7_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D3, SDIF0D3_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_IRL6, IRL6_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D2, SDIF0D2_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK), + PINMUX_GPIO(GPIO_FN_IRL5, IRL5_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D1, SDIF0D1_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK), + PINMUX_GPIO(GPIO_FN_IRL4, IRL4_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D0, SDIF0D0_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK), + PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK), + PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK), + PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK), + PINMUX_GPIO(GPIO_FN_DRAK3, DRAK3_MARK), + PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK), + PINMUX_GPIO(GPIO_FN_DRAK2, DRAK2_MARK), + PINMUX_GPIO(GPIO_FN_SSI3_WS, SSI3_WS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK), + PINMUX_GPIO(GPIO_FN_DRAK1, DRAK1_MARK), + PINMUX_GPIO(GPIO_FN_SSI3_SDATA, SSI3_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_FSTATUS, FSTATUS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK), + PINMUX_GPIO(GPIO_FN_DRAK0, DRAK0_MARK), + PINMUX_GPIO(GPIO_FN_SSI3_SCK, SSI3_SCK_MARK), + PINMUX_GPIO(GPIO_FN_FSE, FSE_MARK), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + { PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2) { + PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU, + PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU, + PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU, + PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU, + PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU, + PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU, + PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU, + PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU } + }, + { PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2) { + PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU, + PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU, + PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU, + PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU, + PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU, + PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU, + PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU, + PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU } + }, + { PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2) { + PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU, + PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU, + PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU, + PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU, + PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU, + PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU, + PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU, + PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU } + }, + { PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2) { + PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU, + PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU, + PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU, + PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU, + PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU, + PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU, + PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU, + PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU } + }, + { PINMUX_CFG_REG("PECR", 0xffcc0008, 16, 2) { + PE7_FN, PE7_OUT, PE7_IN, PE7_IN_PU, + PE6_FN, PE6_OUT, PE6_IN, PE6_IN_PU, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2) { + PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU, + PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU, + PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU, + PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU, + PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU, + PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU, + PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU, + PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU } + }, + { PINMUX_CFG_REG("PGCR", 0xffcc000c, 16, 2) { + PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU, + PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU, + PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2) { + PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU, + PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU, + PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU, + PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU, + PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU, + PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU, + PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU, + PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU } + }, + { PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2) { + PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU, + PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU, + PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU, + PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU, + PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU, + PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU, + PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU, + 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1) { + 0, 0, + P1MSEL14_0, P1MSEL14_1, + P1MSEL13_0, P1MSEL13_1, + P1MSEL12_0, P1MSEL12_1, + P1MSEL11_0, P1MSEL11_1, + P1MSEL10_0, P1MSEL10_1, + P1MSEL9_0, P1MSEL9_1, + P1MSEL8_0, P1MSEL8_1, + P1MSEL7_0, P1MSEL7_1, + P1MSEL6_0, P1MSEL6_1, + P1MSEL5_0, P1MSEL5_1, + P1MSEL4_0, P1MSEL4_1, + P1MSEL3_0, P1MSEL3_1, + P1MSEL2_0, P1MSEL2_1, + P1MSEL1_0, P1MSEL1_1, + P1MSEL0_0, P1MSEL0_1 } + }, + { PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1) { + P2MSEL15_0, P2MSEL15_1, + P2MSEL14_0, P2MSEL14_1, + P2MSEL13_0, P2MSEL13_1, + P2MSEL12_0, P2MSEL12_1, + P2MSEL11_0, P2MSEL11_1, + P2MSEL10_0, P2MSEL10_1, + P2MSEL9_0, P2MSEL9_1, + P2MSEL8_0, P2MSEL8_1, + P2MSEL7_0, P2MSEL7_1, + P2MSEL6_0, P2MSEL6_1, + P2MSEL5_0, P2MSEL5_1, + P2MSEL4_0, P2MSEL4_1, + P2MSEL3_0, P2MSEL3_1, + P2MSEL2_0, P2MSEL2_1, + P2MSEL1_0, P2MSEL1_1, + P2MSEL0_0, P2MSEL0_1 } + }, + {} +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PADR", 0xffcc0020, 8) { + PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA, + PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA } + }, + { PINMUX_DATA_REG("PBDR", 0xffcc0022, 8) { + PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA, + PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA } + }, + { PINMUX_DATA_REG("PCDR", 0xffcc0024, 8) { + PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA, + PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA } + }, + { PINMUX_DATA_REG("PDDR", 0xffcc0026, 8) { + PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA, + PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA } + }, + { PINMUX_DATA_REG("PEDR", 0xffcc0028, 8) { + PE7_DATA, PE6_DATA, + 0, 0, 0, 0, 0, 0 } + }, + { PINMUX_DATA_REG("PFDR", 0xffcc002a, 8) { + PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA, + PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA } + }, + { PINMUX_DATA_REG("PGDR", 0xffcc002c, 8) { + PG7_DATA, PG6_DATA, PG5_DATA, 0, + 0, 0, 0, 0 } + }, + { PINMUX_DATA_REG("PHDR", 0xffcc002e, 8) { + PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA, + PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA } + }, + { PINMUX_DATA_REG("PJDR", 0xffcc0030, 8) { + PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA, + PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 } + }, + { }, +}; + +static struct pinmux_info sh7786_pinmux_info = { + .name = "sh7786_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PA7, + .last_gpio = GPIO_FN_FSE, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +static int __init plat_pinmux_setup(void) +{ + return register_pinmux(&sh7786_pinmux_info); +} + +arch_initcall(plat_pinmux_setup); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c new file mode 100644 index 000000000000..249b99e1adb5 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -0,0 +1,407 @@ +/* + * SH7786 Setup + * + * Copyright (C) 2009 Renesas Solutions Corp. + * Kuninori Morimoto + * + * Based on SH7785 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffea0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, + /* + * The rest of these all have multiplexed IRQs + */ + { + .mapbase = 0xffeb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 44, 44, 44 }, + }, { + .mapbase = 0xffec0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 50, 50, 50, 50 }, + }, { + .mapbase = 0xffed0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 51, 51, 51, 51 }, + }, { + .mapbase = 0xffee0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 52, 52, 52 }, + }, { + .mapbase = 0xffef0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 53, 53, 53, 53 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7786_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7786_devices_setup(void) +{ + return platform_add_devices(sh7786_devices, + ARRAY_SIZE(sh7786_devices)); +} +device_initcall(sh7786_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + + IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, + + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, + TMU0_0, TMU0_1, TMU0_2, TMU0_3, + TMU1_0, TMU1_1, TMU1_2, + DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6, + HUDI1, HUDI0, + DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3, + HPB_0, HPB_1, HPB_2, + SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3, + SCIF1, + TMU2, TMU3, + SCIF2, SCIF3, SCIF4, SCIF5, + Eth_0, Eth_1, + PCIeC0_0, PCIeC0_1, PCIeC0_2, + PCIeC1_0, PCIeC1_1, PCIeC1_2, + USB, + I2C0, I2C1, + DU, + SSI0, SSI1, SSI2, SSI3, + PCIeC2_0, PCIeC2_1, PCIeC2_2, + HAC0, HAC1, + FLCTL, + HSPI, + GPIO0, GPIO1, + Thermal, + INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7, + + /* interrupt groups */ +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(WDT, 0x3e0), + INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420), + INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460), + INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0), + INTC_VECT(TMU1_2, 0x4c0), + INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520), + INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560), + INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0), + INTC_VECT(DMAC0_6, 0x5c0), + INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600), + INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640), + INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680), + INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0), + INTC_VECT(HPB_2, 0x6e0), + INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720), + INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760), + INTC_VECT(SCIF1, 0x780), + INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0), + INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860), + INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0), + INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0), + INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00), + INTC_VECT(PCIeC0_2, 0xb20), + INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60), + INTC_VECT(PCIeC1_2, 0xb80), + INTC_VECT(USB, 0xba0), + INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0), + INTC_VECT(DU, 0xd00), + INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40), + INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80), + INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0), + INTC_VECT(PCIeC2_2, 0xde0), + INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20), + INTC_VECT(FLCTL, 0xe40), + INTC_VECT(HSPI, 0xe80), + INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0), + INTC_VECT(Thermal, 0xee0), +}; + +/* FIXME: Main CPU support only now */ +#if 1 /* Main CPU */ +#define CnINTMSK0 0xfe410030 +#define CnINTMSK1 0xfe410040 +#define CnINTMSKCLR0 0xfe410050 +#define CnINTMSKCLR1 0xfe410060 +#define CnINT2MSKR0 0xfe410a20 +#define CnINT2MSKR1 0xfe410a24 +#define CnINT2MSKR2 0xfe410a28 +#define CnINT2MSKR3 0xfe410a2c +#define CnINT2MSKCR0 0xfe410a30 +#define CnINT2MSKCR1 0xfe410a34 +#define CnINT2MSKCR2 0xfe410a38 +#define CnINT2MSKCR3 0xfe410a3c +#else /* Sub CPU */ +#define CnINTMSK0 0xfe410034 +#define CnINTMSK1 0xfe410044 +#define CnINTMSKCLR0 0xfe410054 +#define CnINTMSKCLR1 0xfe410064 +#define CnINT2MSKR0 0xfe410b20 +#define CnINT2MSKR1 0xfe410b24 +#define CnINT2MSKR2 0xfe410b28 +#define CnINT2MSKR3 0xfe410b2c +#define CnINT2MSKCR0 0xfe410b30 +#define CnINT2MSKCR1 0xfe410b34 +#define CnINT2MSKCR2 0xfe410b38 +#define CnINT2MSKCR3 0xfe410b3c +#endif + +#define INTMSK2 0xfe410068 +#define INTMSKCLR2 0xfe41006c + +static struct intc_mask_reg mask_registers[] __initdata = { + { CnINTMSK0, CnINTMSKCLR0, 32, + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, + { INTMSK2, INTMSKCLR2, 32, + { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0, + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } }, + { CnINT2MSKR0, CnINT2MSKCR0 , 32, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT } }, + { CnINT2MSKR1, CnINT2MSKCR1, 32, + { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0, + DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6, + HUDI1, HUDI0, + DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3, + HPB_0, HPB_1, HPB_2, + SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3, + SCIF1, + TMU2, TMU3, 0, } }, + { CnINT2MSKR2, CnINT2MSKCR2, 32, + { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5, + Eth_0, Eth_1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + PCIeC0_0, PCIeC0_1, PCIeC0_2, + PCIeC1_0, PCIeC1_1, PCIeC1_2, + USB, 0, 0 } }, + { CnINT2MSKR3, CnINT2MSKCR3, 32, + { 0, 0, 0, 0, 0, 0, + I2C0, I2C1, + DU, SSI0, SSI1, SSI2, SSI3, + PCIeC2_0, PCIeC2_1, PCIeC2_2, + HAC0, HAC1, + FLCTL, 0, + HSPI, GPIO0, GPIO1, Thermal, + 0, 0, 0, 0, 0, 0, 0, 0 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } }, + { 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1, + TMU0_2, TMU0_3 } }, + { 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1, + TMU1_2, 0 } }, + { 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1, + DMAC0_2, DMAC0_3 } }, + { 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5, + DMAC0_6, HUDI1 } }, + { 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0, + DMAC1_1, DMAC1_2 } }, + { 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0, + HPB_1, HPB_2 } }, + { 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1, + SCIF0_2, SCIF0_3 } }, + { 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } }, + { 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } }, + { 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5, + Eth_0, Eth_1 } }, + { 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } }, + { 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } }, + { 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } }, + { 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } }, + { 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2, + PCIeC1_0, PCIeC1_1 } }, + { 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } }, + { 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } }, + { 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } }, + { 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } }, + { 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0, + PCIeC2_1, PCIeC2_2 } }, + { 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } }, + { 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0, + GPIO1, Thermal } }, + { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } }, + { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ + +static struct intc_vect vectors_irq0123[] __initdata = { + INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240), + INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0), +}; + +static struct intc_vect vectors_irq4567[] __initdata = { + INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340), + INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0), +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xfe410024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123", + vectors_irq0123, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); + +static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567", + vectors_irq4567, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); + +/* External interrupt pins in IRL mode */ + +static struct intc_vect vectors_irl0123[] __initdata = { + INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220), + INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260), + INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0), + INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0), + INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320), + INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360), + INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0), + INTC_VECT(IRL0_HHHL, 0x3c0), +}; + +static struct intc_vect vectors_irl4567[] __initdata = { + INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920), + INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960), + INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0), + INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0), + INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20), + INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60), + INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0), + INTC_VECT(IRL4_HHHL, 0xac0), +}; + +static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123, + NULL, mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567, + NULL, mask_registers, NULL, NULL); + +#define INTC_ICR0 0xfe410000 +#define INTC_INTMSK0 CnINTMSK0 +#define INTC_INTMSK1 CnINTMSK1 +#define INTC_INTMSK2 INTMSK2 +#define INTC_INTMSKCLR1 CnINTMSKCLR1 +#define INTC_INTMSKCLR2 INTMSKCLR2 + +void __init plat_irq_setup(void) +{ + /* disable IRQ3-0 + IRQ7-4 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + register_intc_controller(&intc_desc); +} + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ7654: + /* select IRQ mode for IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0); + register_intc_controller(&intc_desc_irq4567); + break; + case IRQ_MODE_IRQ3210: + /* select IRQ mode for IRL3-0 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0); + register_intc_controller(&intc_desc_irq0123); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl4567); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl0123); + break; + default: + BUG(); + } +} + +void __init plat_mem_setup(void) +{ +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 370d2cfa34eb..61ab2a7f8647 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -432,6 +432,7 @@ static const char *cpu_name[] = { [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", + [CPU_SH7786] = "SH7786", [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 2b62f9cff22b..10b5a6f17cc0 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -244,6 +244,7 @@ static int tmu_timer_init(void) !defined(CONFIG_CPU_SUBTYPE_SH7721) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7786) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index 1d97d64cb95f..1b9d4304b3bf 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -107,6 +107,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_SH7780: case CPU_SH7781: case CPU_SH7785: + case CPU_SH7786: case CPU_SH7723: case CPU_SHX3: lmodel = &op_model_sh4a_ops; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index d3ccce0bfd44..dbf5357a77b3 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -263,6 +263,7 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) { @@ -284,7 +285,8 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) static inline int scif_txroom(struct uart_port *port) { return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index bb9fe1224880..d0aa82d7fce0 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -126,7 +126,8 @@ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ # define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ # define SCSPTR2 0xffec0024 /* 16 bit SCIF */ @@ -182,6 +183,7 @@ defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ #else @@ -413,7 +415,8 @@ SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) @@ -644,7 +647,8 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) @@ -746,7 +750,8 @@ static inline int sci_rxd_in(struct uart_port *port) */ #if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ -- cgit v1.2.3 From 37042fbd8b3256d2a44b17646fa9de8777d5a34a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Mar 2009 15:57:02 +0900 Subject: sh: SH7786 is an SH-X3 core, select CPU_SHX3. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0ae09683fb21..83aee3db54b4 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -359,7 +359,7 @@ config CPU_SUBTYPE_SH7785 config CPU_SUBTYPE_SH7786 bool "Support SH7786 processor" select CPU_SH4A - select CPU_SHX2 + select CPU_SHX3 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA -- cgit v1.2.3 From 5ac072e110ff358a9ebc318a1b54f0182b799f72 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 3 Mar 2009 16:22:00 +0900 Subject: sh: Urquell board support. This adds preliminary support for the SH7786-based Urquell board. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/Kconfig | 5 + arch/sh/boards/Makefile | 1 + arch/sh/boards/board-urquell.c | 128 +++++++ arch/sh/configs/urquell_defconfig | 534 +++++++++++++++++++++++++++++ arch/sh/include/mach-common/mach/urquell.h | 68 ++++ arch/sh/tools/mach-types | 1 + 6 files changed, 737 insertions(+) create mode 100644 arch/sh/boards/board-urquell.c create mode 100644 arch/sh/configs/urquell_defconfig create mode 100644 arch/sh/include/mach-common/mach/urquell.h diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index c9da37088d2e..694abecf6025 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -162,6 +162,11 @@ config SH_SH7785LCR_29BIT_PHYSMAPS DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, you can access all on-board device in 29bit address mode. +config SH_URQUELL + bool "Urquell" + depends on CPU_SUBTYPE_SH7786 + select ARCH_REQUIRE_GPIOLIB + config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 269ae2be49ef..6f101a8161f5 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o +obj-$(CONFIG_SH_URQUELL) += board-urquell.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c new file mode 100644 index 000000000000..d5caeabf46e0 --- /dev/null +++ b/arch/sh/boards/board-urquell.c @@ -0,0 +1,128 @@ +/* + * Renesas Technology Corp. SH7786 Urquell Support. + * + * Copyright (C) 2008 Kuninori Morimoto + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource heartbeat_resources[] = { + [0] = { + .start = BOARDREG(SLEDR), + .end = BOARDREG(SLEDR), + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct platform_device *urquell_devices[] __initdata = { + &heartbeat_device, + &nor_flash_device, +}; + +static int __init urquell_devices_setup(void) +{ + /* USB */ + gpio_request(GPIO_FN_USB_OVC0, NULL); + gpio_request(GPIO_FN_USB_PENC0, NULL); + + return platform_add_devices(urquell_devices, + ARRAY_SIZE(urquell_devices)); +} +device_initcall(urquell_devices_setup); + +static void urquell_power_off(void) +{ + __raw_writew(0xa5a5, UBOARDREG(SRSTR)); +} + +/* Initialize the board */ +static void __init urquell_setup(char **cmdline_p) +{ + printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n"); + + pm_power_off = urquell_power_off; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_urquell __initmv = { + .mv_name = "Urquell", + .mv_setup = urquell_setup, +}; diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig new file mode 100644 index 000000000000..94a4bdbd1bc0 --- /dev/null +++ b/arch/sh/configs/urquell_defconfig @@ -0,0 +1,534 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc4 +# Tue Mar 3 16:20:09 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +# CONFIG_HOTPLUG is not set +# CONFIG_PRINTK is not set +# CONFIG_BUG is not set +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +CONFIG_SHMEM=y +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_BASE_SMALL=1 +# CONFIG_MODULES is not set +# CONFIG_BLOCK is not set +# CONFIG_FREEZER is not set + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +CONFIG_CPU_SUBTYPE_SH7786=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_URQUELL=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=31250000 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y + +# +# SCSI device support +# +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Pseudo filesystems +# +# CONFIG_PROC_FS is not set +# CONFIG_SYSFS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h new file mode 100644 index 000000000000..14b3e1d01777 --- /dev/null +++ b/arch/sh/include/mach-common/mach/urquell.h @@ -0,0 +1,68 @@ +#ifndef __MACH_URQUELL_H +#define __MACH_URQUELL_H + +/* + * ------ 0x00000000 ------------------------------------ + * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH + * -----+ 0x04000000 ------------------------------------ + * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH + * -----+ 0x08000000 ------------------------------------ + * CS2 | DDR3 + * CS3 | + * -----+ 0x10000000 ------------------------------------ + * CS4 | PCIe + * -----+ 0x14000000 ------------------------------------ + * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA + * -----+ 0x18000000 ------------------------------------ + * CS6 | ATA, NAND FLASH + * -----+ 0x1c000000 ------------------------------------ + * CS7 | SH7786 register + * -----+------------------------------------------------ + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define CS1_BASE 0x05000000 +#define CS5_BASE 0x15000000 +#define FPGA_BASE CS1_BASE + +#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS) +#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS) + +#define SRSTR_OFS 0x0000 /* System reset register */ +#define BDMR_OFS 0x0010 /* Board operating mode resister */ +#define IRL0SR_OFS 0x0020 /* IRL0 Status register */ +#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */ +#define IRL1SR_OFS 0x0040 /* IRL1 Status register */ +#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */ +#define IRL2SR_OFS 0x0060 /* IRL2 Status register */ +#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */ +#define IRL3SR_OFS 0x0080 /* IRL3 Status register */ +#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */ +#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */ +#define SLEDR_OFS 0x0130 /* LED control resister */ +#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */ +#define FPVERR_OFS 0x0150 /* FPGA Version register */ +#define FPDATER_OFS 0x0160 /* FPGA Date register */ +#define FPYEARR_OFS 0x0170 /* FPGA Year register */ +#define TCLKCR_OFS 0x0180 /* TCLK Control register */ +#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */ +#define FPODR_OFS 0x1010 /* Output port data register */ +#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */ +#define FPINDR_OFS 0x1030 /* Input port data register */ +#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */ +#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */ +#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */ +#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */ +#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */ +#define LATCHCR_OFS 0x3000 /* Latch control register */ +#define LATCUAR_OFS 0x3010 /* Latch upper address register */ +#define LATCLAR_OFS 0x3012 /* Latch lower address register */ +#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */ +#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */ + +#define CHARLED_OFS 0x2000 /* Character LED */ + +#endif /* __MACH_URQUELL_H */ + diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 284b7e867496..8f9e1662fa9c 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -52,3 +52,4 @@ RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA SH7763RDP SH_SH7763RDP SH7785LCR SH_SH7785LCR +URQUELL SH_URQUELL -- cgit v1.2.3 From ee554be9ddcb666445b6765d8b5cdbfe80a1e9cf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Mar 2009 16:52:55 +0800 Subject: Blackfin arch: fix compile failure when missing the anomaly definition make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf527/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf533/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf537/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf538/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf548/include/mach/anomaly.h | 1 + arch/blackfin/mach-bf561/include/mach/anomaly.h | 1 + 7 files changed, 8 insertions(+) diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index e5b4bef0edae..6e1670072829 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -65,6 +65,7 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) @@ -72,6 +73,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 035e8d835058..fdc87839af60 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -167,6 +167,7 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 0d3a03429fb9..657dd1820a93 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -278,6 +278,7 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 9cb39121d1cb..fe1ae4c75cd6 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -168,6 +168,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index e130b4f8a05d..56ea454709ca 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -124,6 +124,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 23d03c52f4b4..d9d10a73c1dc 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -171,6 +171,7 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 1a9e17562821..24d3a2264e44 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -283,6 +283,7 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) -- cgit v1.2.3 From 97d4b35fb44cd5a80bc10952e2b1de5d3a14117b Mon Sep 17 00:00:00 2001 From: Tom Parker Date: Tue, 3 Mar 2009 17:59:39 +0800 Subject: Blackfin arch: fix bug - Error if one serial has hardware flow control and the other doesn't I have a system where UART0 is configured with hardware flow control, but UART1 doesn't have it enabled. Attempting to access UART1 in this configuration results in the following error in dmesg: <3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart ! <5>Stack from 0082bc7c: <5> 0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4 00000000 <5> 00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249 00003035 <5> 00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748 0000ffff <5> 22222222 22222222 004e1628 00427304 00000000 00000032 00000023 0054b748 <5> 00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748 00000001 <5> 0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134 0054b748 <5> <5>Call Trace: <4>[<00485c16>] _uart_startup+0x56/0x178 <4>[<004865c8>] _uart_open+0x40/0x3e0 <4>[<0048661c>] _uart_open+0x94/0x3e0 <4>[<0047f1ce>] _init_dev+0x1fa/0x450 <4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8 <4>[<004815da>] _tty_open+0xf6/0x21c <4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c <4>[<004375e4>] _chrdev_open+0x7c/0x134 <4>[<0043dc2c>] _open_namei+0x60/0x568 <4>[<00433fa2>] ___dentry_open+0x9e/0x188 <4>[<00437568>] _chrdev_open+0x0/0x134 <4>[<0043410c>] _nameidata_to_filp+0x30/0x3c <4>[<00434152>] _do_filp_open+0x3a/0x44 <4>[<00408826>] _task_running_tick+0x102/0x278 <4>[<0043418e>] _do_sys_open+0x32/0xac <4>[<0043ede4>] _sys_ioctl+0x28/0x50 <4>[<0043edbc>] _sys_ioctl+0x0/0x50 <4>[<00434224>] _sys_open+0x18/0x20 <4>[<0043420c>] _sys_open+0x0/0x20 <4>[<00418174>] _sys_setuid+0x0/0xc8 This is because the #ifdef's in bfin_serial_5xx.h are messed up. More specifically, they add/remove the uart_{rts,cts}_pin fields in bfin_serial_resources based on whether the particular port has rts/cts enabled, as opposed to when either port has it enabled. This patch fixed this. Signed-off-by: Tom Parker Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- .../mach-bf518/include/mach/bfin_serial_5xx.h | 4 ++-- .../mach-bf527/include/mach/bfin_serial_5xx.h | 4 ++-- .../mach-bf533/include/mach/bfin_serial_5xx.h | 2 +- .../mach-bf537/include/mach/bfin_serial_5xx.h | 4 ++-- .../mach-bf538/include/mach/bfin_serial_5xx.h | 4 ++-- .../mach-bf548/include/mach/bfin_serial_5xx.h | 22 +++++++++++++++------- .../mach-bf561/include/mach/bfin_serial_5xx.h | 2 +- 7 files changed, 25 insertions(+), 17 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index b50a63b975a2..e21c1c3e4ec7 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index 75722d6008b0..e8c41fd842b5 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index f3d9e495230c..5f517f53b0fd 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b3f87e1d16a2..9e34700844a2 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 40503b6b89a3..3c2811ebecdd 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index e4cf35e7ab9f..c05e79cba257 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -63,7 +63,7 @@ #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN @@ -74,12 +74,12 @@ # define CONFIG_UART0_RTS_PIN -1 # endif -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 +# ifndef CONFIG_UART2_CTS_PIN +# define CONFIG_UART2_CTS_PIN -1 # endif -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 +# ifndef CONFIG_UART2_RTS_PIN +# define CONFIG_UART2_RTS_PIN -1 # endif #endif @@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -143,6 +143,10 @@ struct bfin_serial_res bfin_serial_resource[] = { #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + 0, + 0, #endif }, #endif @@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART2_TX, CH_UART2_RX, #endif -#ifdef CONFIG_BFIN_UART2_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART2_CTS_PIN, CONFIG_UART2_RTS_PIN, #endif @@ -167,6 +171,10 @@ struct bfin_serial_res bfin_serial_resource[] = { #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART3_TX, CH_UART3_RX, +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + 0, + 0, #endif }, #endif diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index 043bfcf26c52..ca8c5f645209 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif -- cgit v1.2.3 From 82ad39f9391fca1d3177bd9f6a5264eff5b5346a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 3 Mar 2009 15:00:35 +0100 Subject: ALSA: hda - Fix gcc compile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's false positive, but annoying. sound/pci/hda/hda_codec.c: In function ‘get_empty_pcm_device’: sound/pci/hda/hda_codec.c:2772: warning: ‘dev’ may be used uninitialized in this function Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 7c9ef5c18e77..04cb1251e3e7 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2776,13 +2776,10 @@ static int get_empty_pcm_device(struct hda_bus *bus, int type) for (i = 0; i < ARRAY_SIZE(audio_idx); i++) { dev = audio_idx[i]; if (!test_bit(dev, bus->pcm_dev_bits)) - break; - } - if (i >= ARRAY_SIZE(audio_idx)) { - snd_printk(KERN_WARNING "Too many audio devices\n"); - return -EAGAIN; + goto ok; } - break; + snd_printk(KERN_WARNING "Too many audio devices\n"); + return -EAGAIN; case HDA_PCM_TYPE_SPDIF: case HDA_PCM_TYPE_HDMI: case HDA_PCM_TYPE_MODEM: @@ -2797,6 +2794,7 @@ static int get_empty_pcm_device(struct hda_bus *bus, int type) snd_printk(KERN_WARNING "Invalid PCM type %d\n", type); return -EINVAL; } + ok: set_bit(dev, bus->pcm_dev_bits); return dev; } -- cgit v1.2.3 From a3c7729e6c5d41bbeb3e13befbcf8e4ef76e55dc Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 Mar 2009 16:10:53 +0100 Subject: ASoC: Remove version display from the UDA1380 driver Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index 5242b8156b38..8686a554536e 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -35,8 +35,6 @@ #include "uda1380.h" -#define UDA1380_VERSION "0.6" - /* * uda1380 register cache */ @@ -826,8 +824,6 @@ static int uda1380_probe(struct platform_device *pdev) struct snd_soc_codec *codec; int ret; - pr_info("UDA1380 Audio Codec %s", UDA1380_VERSION); - setup = socdev->codec_data; codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); if (codec == NULL) -- cgit v1.2.3 From ef9e5e5c31cb2c6254760611289ac13e4e41b964 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 Mar 2009 16:10:54 +0100 Subject: ASoC: UDA1380: change decimator/interpolator register handling If the UDA1380's interpolator or decimator are set to be clocked from the WSPLL (which syncs to the WSI signal), the DAI link must be running to change the interpolator/decimator registers (which include volume controls and digital mute setting). * Queue work in the alsa PCM_START .trigger to flush registers as soon as the link is running. This replaces the .prepare and .digital_mute callbacks. * Use the SILENCE override instead of MTM for muting and remove its alsa control to avoid confusion. Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 102 +++++++++++++++++++++------------------------ 1 file changed, 48 insertions(+), 54 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index 8686a554536e..1c9d2a75addb 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -35,6 +36,9 @@ #include "uda1380.h" +static struct work_struct uda1380_work; +static struct snd_soc_codec *uda1380_codec; + /* * uda1380 register cache */ @@ -50,6 +54,8 @@ static const u16 uda1380_reg[UDA1380_CACHEREGNUM] = { 0x0000, 0x8000, 0x0002, 0x0000, }; +static unsigned long uda1380_cache_dirty; + /* * read uda1380 register cache */ @@ -71,8 +77,11 @@ static inline void uda1380_write_reg_cache(struct snd_soc_codec *codec, u16 reg, unsigned int value) { u16 *cache = codec->reg_cache; + if (reg >= UDA1380_CACHEREGNUM) return; + if ((reg >= 0x10) && (cache[reg] != value)) + set_bit(reg - 0x10, &uda1380_cache_dirty); cache[reg] = value; } @@ -111,6 +120,8 @@ static int uda1380_write(struct snd_soc_codec *codec, unsigned int reg, (data[0]<<8) | data[1]); return -EIO; } + if (reg >= 0x10) + clear_bit(reg - 0x10, &uda1380_cache_dirty); return 0; } else return -EIO; @@ -118,6 +129,20 @@ static int uda1380_write(struct snd_soc_codec *codec, unsigned int reg, #define uda1380_reset(c) uda1380_write(c, UDA1380_RESET, 0) +static void uda1380_flush_work(struct work_struct *work) +{ + int bit, reg; + + for_each_bit(bit, &uda1380_cache_dirty, UDA1380_CACHEREGNUM - 0x10) { + reg = 0x10 + bit; + pr_debug("uda1380: flush reg %x val %x:\n", reg, + uda1380_read_reg_cache(uda1380_codec, reg)); + uda1380_write(uda1380_codec, reg, + uda1380_read_reg_cache(uda1380_codec, reg)); + clear_bit(bit, &uda1380_cache_dirty); + } +} + /* declarations of ALSA reg_elem_REAL controls */ static const char *uda1380_deemp[] = { "None", @@ -252,7 +277,6 @@ static const struct snd_kcontrol_new uda1380_snd_controls[] = { SOC_SINGLE("DAC Polarity inverting Switch", UDA1380_MIXER, 15, 1, 0), /* DA_POL_INV */ SOC_ENUM("Noise Shaper", uda1380_sel_ns_enum), /* SEL_NS */ SOC_ENUM("Digital Mixer Signal Control", uda1380_mix_enum), /* MIX_POS, MIX */ - SOC_SINGLE("Silence Switch", UDA1380_MIXER, 7, 1, 0), /* SILENCE, force DAC output to silence */ SOC_SINGLE("Silence Detector Switch", UDA1380_MIXER, 6, 1, 0), /* SDET_ON */ SOC_ENUM("Silence Detector Setting", uda1380_sdet_enum), /* SD_VALUE */ SOC_ENUM("Oversampling Input", uda1380_os_enum), /* OS */ @@ -438,41 +462,28 @@ static int uda1380_set_dai_fmt_capture(struct snd_soc_dai *codec_dai, return 0; } -/* - * Flush reg cache - * We can only write the interpolator and decimator registers - * when the DAI is being clocked by the CPU DAI. It's up to the - * machine and cpu DAI driver to do this before we are called. - */ -static int uda1380_pcm_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) +static int uda1380_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; struct snd_soc_codec *codec = socdev->card->codec; - int reg, reg_start, reg_end, clk; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - reg_start = UDA1380_MVOL; - reg_end = UDA1380_MIXER; - } else { - reg_start = UDA1380_DEC; - reg_end = UDA1380_AGC; - } - - /* FIXME disable DAC_CLK */ - clk = uda1380_read_reg_cache(codec, UDA1380_CLK); - uda1380_write(codec, UDA1380_CLK, clk & ~R00_DAC_CLK); - - for (reg = reg_start; reg <= reg_end; reg++) { - pr_debug("uda1380: flush reg %x val %x:", reg, - uda1380_read_reg_cache(codec, reg)); - uda1380_write(codec, reg, uda1380_read_reg_cache(codec, reg)); + int mixer = uda1380_read_reg_cache(codec, UDA1380_MIXER); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + uda1380_write_reg_cache(codec, UDA1380_MIXER, + mixer & ~R14_SILENCE); + schedule_work(&uda1380_work); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + uda1380_write_reg_cache(codec, UDA1380_MIXER, + mixer | R14_SILENCE); + schedule_work(&uda1380_work); + break; } - - /* FIXME restore DAC_CLK */ - uda1380_write(codec, UDA1380_CLK, clk); - return 0; } @@ -538,24 +549,6 @@ static void uda1380_pcm_shutdown(struct snd_pcm_substream *substream, uda1380_write(codec, UDA1380_CLK, clk); } -static int uda1380_mute(struct snd_soc_dai *codec_dai, int mute) -{ - struct snd_soc_codec *codec = codec_dai->codec; - u16 mute_reg = uda1380_read_reg_cache(codec, UDA1380_DEEMP) & ~R13_MTM; - - /* FIXME: mute(codec,0) is called when the magician clock is already - * set to WSPLL, but for some unknown reason writing to interpolator - * registers works only when clocked by SYSCLK */ - u16 clk = uda1380_read_reg_cache(codec, UDA1380_CLK); - uda1380_write(codec, UDA1380_CLK, ~R00_DAC_CLK & clk); - if (mute) - uda1380_write(codec, UDA1380_DEEMP, mute_reg | R13_MTM); - else - uda1380_write(codec, UDA1380_DEEMP, mute_reg); - uda1380_write(codec, UDA1380_CLK, clk); - return 0; -} - static int uda1380_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { @@ -597,10 +590,9 @@ struct snd_soc_dai uda1380_dai[] = { .rates = UDA1380_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, .ops = { + .trigger = uda1380_trigger, .hw_params = uda1380_pcm_hw_params, .shutdown = uda1380_pcm_shutdown, - .prepare = uda1380_pcm_prepare, - .digital_mute = uda1380_mute, .set_fmt = uda1380_set_dai_fmt_both, }, }, @@ -614,10 +606,9 @@ struct snd_soc_dai uda1380_dai[] = { .formats = SNDRV_PCM_FMTBIT_S16_LE, }, .ops = { + .trigger = uda1380_trigger, .hw_params = uda1380_pcm_hw_params, .shutdown = uda1380_pcm_shutdown, - .prepare = uda1380_pcm_prepare, - .digital_mute = uda1380_mute, .set_fmt = uda1380_set_dai_fmt_playback, }, }, @@ -631,9 +622,9 @@ struct snd_soc_dai uda1380_dai[] = { .formats = SNDRV_PCM_FMTBIT_S16_LE, }, .ops = { + .trigger = uda1380_trigger, .hw_params = uda1380_pcm_hw_params, .shutdown = uda1380_pcm_shutdown, - .prepare = uda1380_pcm_prepare, .set_fmt = uda1380_set_dai_fmt_capture, }, }, @@ -692,6 +683,9 @@ static int uda1380_init(struct snd_soc_device *socdev, int dac_clk) codec->reg_cache_step = 1; uda1380_reset(codec); + uda1380_codec = codec; + INIT_WORK(&uda1380_work, uda1380_flush_work); + /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { -- cgit v1.2.3 From aa4ef01de5f2e7ed948b88f9f1cfc93c8e0c3f25 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 Mar 2009 16:10:51 +0100 Subject: ASoC: Use network mode with 2 slots for 16-bit stereo in pxa-ssp/Zylonite For consistency with 24-bit and 32-bit modes, don't send 16-bit stereo in one 32-bit transfer. Use 2 slots instead on Zylonite. It should result in exactly the same behaviour. Now it is possible to use 16-bit single slot transfers in pxa-ssp, which are needed for Magician to get two frame clock pulses per sample (one for each channel). Signed-off-by: Philipp Zabel Tested-by: Mark Brown Signed-off-by: Mark Brown --- sound/soc/pxa/pxa-ssp.c | 3 +-- sound/soc/pxa/zylonite.c | 7 +++++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 4a973ab710be..c49bb12b0a65 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -644,8 +644,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sscr0 |= SSCR0_FPCKE; #endif sscr0 |= SSCR0_DataSize(16); - if (params_channels(params) > 1) - sscr0 |= SSCR0_EDSS; + /* use network mode (2 slots) for 16 bit stereo */ break; case SNDRV_PCM_FORMAT_S24_LE: sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c index 0140a250db24..9f6116edbb84 100644 --- a/sound/soc/pxa/zylonite.c +++ b/sound/soc/pxa/zylonite.c @@ -127,8 +127,11 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* We're not really in network mode but the emulation wants this. */ - ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 1); + /* Use network mode for stereo, one slot per channel. */ + if (params_channels(params) > 1) + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0x3, 2); + else + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 1); if (ret < 0) return ret; -- cgit v1.2.3 From 5f2a9384a9291d898b4bf85c4fbf497eef582977 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 Mar 2009 16:10:52 +0100 Subject: ASoC: UDA1380: DATAI is slave only Only allow SND_SOC_DAIFMT_CBS_CFS for the playback DAI. Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index 1c9d2a75addb..1b10f488328c 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -399,8 +399,9 @@ static int uda1380_set_dai_fmt_both(struct snd_soc_dai *codec_dai, iface |= R01_SFORI_MSB | R01_SFORO_MSB; } - if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) == SND_SOC_DAIFMT_CBM_CFM) - iface |= R01_SIM; + /* DATAI is slave only, so in single-link mode, this has to be slave */ + if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) + return -EINVAL; uda1380_write(codec, UDA1380_IFACE, iface); @@ -428,6 +429,10 @@ static int uda1380_set_dai_fmt_playback(struct snd_soc_dai *codec_dai, iface |= R01_SFORI_MSB; } + /* DATAI is slave only, so this has to be slave */ + if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) + return -EINVAL; + uda1380_write(codec, UDA1380_IFACE, iface); return 0; -- cgit v1.2.3 From f45964ed6971db2e7ae6cb9b164def1d23b46612 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Mon, 2 Mar 2009 17:30:36 +0200 Subject: [ARM] orion5x: pass dram mbus data to xor driver This data should be passed to the xor driver in order to initialize the address decoding windows of the xor unit. without this patch, the self tests of the xor will fail unless the address decoding windows were initialized by the boot loader. Signed-off-by: Saeed Bishara Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/common.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0a623379789f..8a0e49d84256 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void) /***************************************************************************** * XOR engine ****************************************************************************/ +struct mv_xor_platform_shared_data orion5x_xor_shared_data = { + .dram = &orion5x_mbus_dram_info, +}; + static struct resource orion5x_xor_shared_resources[] = { { .name = "xor low", @@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = { static struct platform_device orion5x_xor_shared = { .name = MV_XOR_SHARED_NAME, .id = 0, + .dev = { + .platform_data = &orion5x_xor_shared_data, + }, .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources), .resource = orion5x_xor_shared_resources, }; -- cgit v1.2.3 From 9bd50df6aa9bdd583793a16b0b9379dfd78c079e Mon Sep 17 00:00:00 2001 From: Philippe Gerum Date: Wed, 4 Mar 2009 16:52:38 +0800 Subject: Blackfin arch: Update adeos blackfin arch patch to 1.9-00 Signed-off-by: Philippe Gerum Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/ipipe.h | 100 ++++++----------- arch/blackfin/include/asm/ipipe_base.h | 12 +- arch/blackfin/include/asm/irq.h | 36 ++++-- arch/blackfin/include/asm/thread_info.h | 2 + arch/blackfin/kernel/ipipe.c | 176 ++++++++---------------------- arch/blackfin/kernel/irqchip.c | 14 ++- arch/blackfin/kernel/time.c | 5 +- arch/blackfin/mach-common/entry.S | 61 ++++++++++- arch/blackfin/mach-common/interrupt.S | 12 +- arch/blackfin/mach-common/ints-priority.c | 126 +++++++++------------ 10 files changed, 241 insertions(+), 303 deletions(-) diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 76f53d8b9a0d..343b56361ec9 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include #include -#define IPIPE_ARCH_STRING "1.8-00" +#define IPIPE_ARCH_STRING "1.9-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 8 +#define IPIPE_MINOR_NUMBER 9 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -83,9 +83,9 @@ struct ipipe_sysinfo { "%2 = CYCLES2\n" \ "CC = %2 == %0\n" \ "if ! CC jump 1b\n" \ - : "=r" (((unsigned long *)&t)[1]), \ - "=r" (((unsigned long *)&t)[0]), \ - "=r" (__cy2) \ + : "=d,a" (((unsigned long *)&t)[1]), \ + "=d,a" (((unsigned long *)&t)[0]), \ + "=d,a" (__cy2) \ : /*no input*/ : "CC"); \ t; \ }) @@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, #define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq)) -#define __ipipe_lock_root() \ - set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) +static inline int __ipipe_check_tickdev(const char *devname) +{ + return 1; +} -#define __ipipe_unlock_root() \ - clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) +static inline void __ipipe_lock_root(void) +{ + set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); +} + +static inline void __ipipe_unlock_root(void) +{ + clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); +} void __ipipe_enable_pipeline(void); #define __ipipe_hook_critical_ipi(ipd) do { } while (0) -#define __ipipe_sync_pipeline(syncmask) \ - do { \ - struct ipipe_domain *ipd = ipipe_current_domain; \ - if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \ - __ipipe_sync_stage(syncmask); \ - } while (0) +#define __ipipe_sync_pipeline ___ipipe_sync_pipeline +void ___ipipe_sync_pipeline(unsigned long syncmask); void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs); int __ipipe_get_irq_priority(unsigned irq); -int __ipipe_get_irqthread_priority(unsigned irq); - void __ipipe_stall_root_raw(void); void __ipipe_unstall_root_raw(void); void __ipipe_serial_debug(const char *fmt, ...); +asmlinkage void __ipipe_call_irqtail(unsigned long addr); + DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs); extern unsigned long __ipipe_core_clock; @@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) #define __ipipe_run_irqtail() /* Must be a macro */ \ do { \ - asmlinkage void __ipipe_call_irqtail(void); \ unsigned long __pending; \ - CSYNC(); \ + CSYNC(); \ __pending = bfin_read_IPEND(); \ if (__pending & 0x8000) { \ __pending &= ~0x8010; \ if (__pending && (__pending & (__pending - 1)) == 0) \ - __ipipe_call_irqtail(); \ + __ipipe_call_irqtail(__ipipe_irq_tail_hook); \ } \ } while (0) #define __ipipe_run_isr(ipd, irq) \ do { \ if (ipd == ipipe_root_domain) { \ - /* \ - * Note: the I-pipe implements a threaded interrupt model on \ - * this arch for Linux external IRQs. The interrupt handler we \ - * call here only wakes up the associated IRQ thread. \ - */ \ - if (ipipe_virtual_irq_p(irq)) { \ - /* No irqtail here; virtual interrupts have no effect \ - on IPEND so there is no need for processing \ - deferral. */ \ - local_irq_enable_nohead(ipd); \ + local_irq_enable_hw(); \ + if (ipipe_virtual_irq_p(irq)) \ ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ - local_irq_disable_nohead(ipd); \ - } else \ - /* \ - * No need to run the irqtail here either; \ - * we can't be preempted by hw IRQs, so \ - * non-Linux IRQs cannot stack over the short \ - * thread wakeup code. Which in turn means \ - * that no irqtail condition could be pending \ - * for domains above Linux in the pipeline. \ - */ \ + else \ ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \ + local_irq_disable_hw(); \ } else { \ __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ local_irq_enable_nohead(ipd); \ @@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void); int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); -#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS) -#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS) - +#ifdef CONFIG_GENERIC_CLOCKEVENTS +#define IRQ_SYSTMR IRQ_CORETMR +#define IRQ_PRIOTMR IRQ_CORETMR +#else #define IRQ_SYSTMR IRQ_TIMER0 #define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 +#endif -#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) -#define PRIO_GPIODEMUX(irq) CONFIG_PFA -#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537) -#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA -#elif defined(CONFIG_BF52x) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \ - (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \ - (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \ - -1) -#elif defined(CONFIG_BF561) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \ - (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \ - (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \ - -1) +#ifdef CONFIG_BF561 #define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val) #define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS() #elif defined(CONFIG_BF54x) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \ - (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \ - (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \ - (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \ - -1) #define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val) #define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val) -#else -# error "no PRIO_GPIODEMUX() for this part" #endif #define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0) @@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); #endif /* !CONFIG_IPIPE */ +#define ipipe_update_tick_evtdev(evtdev) do { } while (0) + #endif /* !__ASM_BLACKFIN_IPIPE_H */ diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h index cb1025aeabcf..3e8acbd1a3be 100644 --- a/arch/blackfin/include/asm/ipipe_base.h +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -1,5 +1,5 @@ /* -*- linux-c -*- - * include/asm-blackfin/_baseipipe.h + * include/asm-blackfin/ipipe_base.h * * Copyright (C) 2007 Philippe Gerum. * @@ -27,8 +27,9 @@ #define IPIPE_NR_XIRQS NR_IRQS #define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */ -/* Blackfin-specific, global domain flags */ -#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */ +/* Blackfin-specific, per-cpu pipeline status */ +#define IPIPE_SYNCDEFER_FLAG 15 +#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK) /* Blackfin traps -- i.e. exception vector numbers */ #define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */ @@ -48,11 +49,6 @@ #ifndef __ASSEMBLY__ -#include - -extern int test_bit(int nr, const void *addr); - - extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ static inline void __ipipe_stall_root(void) diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 3d977909ce7d..7645e85a5f6f 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags); #define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags)) #define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x) -#define local_save_flags(x) \ - do { \ - (x) = __ipipe_test_root() ? \ +#define local_save_flags(x) \ + do { \ + (x) = __ipipe_test_root() ? \ __all_masked_irq_flags : bfin_irq_flags; \ + barrier(); \ } while (0) -#define local_irq_save(x) \ - do { \ - (x) = __ipipe_test_and_stall_root(); \ +#define local_irq_save(x) \ + do { \ + (x) = __ipipe_test_and_stall_root() ? \ + __all_masked_irq_flags : bfin_irq_flags; \ + barrier(); \ + } while (0) + +static inline void local_irq_restore(unsigned long x) +{ + barrier(); + __ipipe_restore_root(x == __all_masked_irq_flags); +} + +#define local_irq_disable() \ + do { \ + __ipipe_stall_root(); \ + barrier(); \ } while (0) -#define local_irq_restore(x) __ipipe_restore_root(x) -#define local_irq_disable() __ipipe_stall_root() -#define local_irq_enable() __ipipe_unstall_root() +static inline void local_irq_enable(void) +{ + barrier(); + __ipipe_unstall_root(); +} + #define irqs_disabled() __ipipe_test_root() #define local_save_flags_hw(x) \ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index e721ce55956c..2920087516f2 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 4 #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ +#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1< #include -static int create_irq_threads; - DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); -static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask); - -static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count); - asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); static void __ipipe_no_irqtail(void); @@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void) */ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); struct ipipe_domain *this_domain, *next_domain; struct list_head *head, *pos; int m_ack, s = -1; @@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * interrupt. */ m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); - this_domain = ipipe_current_domain; if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) @@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) next_domain = list_entry(head, struct ipipe_domain, p_link); if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) { if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) - next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); - if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); + next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); + if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); __ipipe_dispatch_wired(next_domain, irq); - goto finalize; - return; + goto out; } } /* Ack the interrupt. */ pos = head; - while (pos != &__ipipe_pipeline) { next_domain = list_entry(pos, struct ipipe_domain, p_link); - /* - * For each domain handling the incoming IRQ, mark it - * as pending in its log. - */ if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) { - /* - * Domains that handle this IRQ are polled for - * acknowledging it by decreasing priority - * order. The interrupt must be made pending - * _first_ in the domain's status flags before - * the PIC is unlocked. - */ __ipipe_set_irq_pending(next_domain, irq); - if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) { - next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); + next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); m_ack = 1; } } - - /* - * If the domain does not want the IRQ to be passed - * down the interrupt pipe, exit the loop now. - */ if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control)) break; - pos = next_domain->p_link.next; } @@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * immediately to the current domain if the interrupt has been * marked as 'sticky'. This search does not go beyond the * current domain in the pipeline. We also enforce the - * additional root stage lock (blackfin-specific). */ + * additional root stage lock (blackfin-specific). + */ + if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); - if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); -finalize: + /* + * If the interrupt preempted the head domain, then do not + * even try to walk the pipeline, unless an interrupt is + * pending for it. + */ + if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) && + ipipe_head_cpudom_var(irqpend_himask) == 0) + goto out; __ipipe_walk_pipeline(head); - +out: if (!s) - __clear_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); + __clear_bit(IPIPE_STALL_FLAG, &p->status); } int __ipipe_check_root(void) @@ -187,7 +166,7 @@ int __ipipe_check_root(void) void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); int prio = desc->ic_prio; desc->depth = 0; @@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc); void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); int prio = desc->ic_prio; if (ipd != &ipipe_root && @@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs) { unsigned long flags; - /* We need to run the IRQ tail hook whenever we don't + /* + * We need to run the IRQ tail hook whenever we don't * propagate a syscall to higher domains, because we know that * important operations might be pending there (e.g. Xenomai - * deferred rescheduling). */ + * deferred rescheduling). + */ - if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) { + if (regs->orig_p0 < NR_syscalls) { void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; hook(); - return 0; + if ((current->flags & PF_EVNOTIFY) == 0) + return 0; } /* @@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq) { unsigned long flags; +#ifdef CONFIG_IPIPE_DEBUG if (irq >= IPIPE_NR_IRQS || (ipipe_virtual_irq_p(irq) && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map))) return -EINVAL; +#endif local_irq_save_hw(flags); - __ipipe_handle_irq(irq, NULL); - local_irq_restore_hw(flags); return 1; } -/* Move Linux IRQ to threads. */ - -static int do_irqd(void *__desc) +asmlinkage void __ipipe_sync_root(void) { - struct irq_desc *desc = __desc; - unsigned irq = desc - irq_desc; - int thrprio = desc->thr_prio; - int thrmask = 1 << thrprio; - int cpu = smp_processor_id(); - cpumask_t cpumask; - - sigfillset(¤t->blocked); - current->flags |= PF_NOFREEZE; - cpumask = cpumask_of_cpu(cpu); - set_cpus_allowed(current, cpumask); - ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio); - - while (!kthread_should_stop()) { - local_irq_disable(); - if (!(desc->status & IRQ_SCHEDULED)) { - set_current_state(TASK_INTERRUPTIBLE); -resched: - local_irq_enable(); - schedule(); - local_irq_disable(); - } - __set_current_state(TASK_RUNNING); - /* - * If higher priority interrupt servers are ready to - * run, reschedule immediately. We need this for the - * GPIO demux IRQ handler to unmask the interrupt line - * _last_, after all GPIO IRQs have run. - */ - if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1))) - goto resched; - if (--per_cpu(pending_irq_count[thrprio], cpu) == 0) - per_cpu(pending_irqthread_mask, cpu) &= ~thrmask; - desc->status &= ~IRQ_SCHEDULED; - desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); - local_irq_enable(); - } - __set_current_state(TASK_RUNNING); - return 0; -} + unsigned long flags; -static void kick_irqd(unsigned irq, void *cookie) -{ - struct irq_desc *desc = irq_desc + irq; - int thrprio = desc->thr_prio; - int thrmask = 1 << thrprio; - int cpu = smp_processor_id(); - - if (!(desc->status & IRQ_SCHEDULED)) { - desc->status |= IRQ_SCHEDULED; - per_cpu(pending_irqthread_mask, cpu) |= thrmask; - ++per_cpu(pending_irq_count[thrprio], cpu); - wake_up_process(desc->thread); - } -} + BUG_ON(irqs_disabled()); -int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc) -{ - if (desc->thread || !create_irq_threads) - return 0; - - desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq); - if (desc->thread == NULL) { - printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq); - return -ENOMEM; - } + local_irq_save_hw(flags); - wake_up_process(desc->thread); + clear_thread_flag(TIF_IRQ_SYNC); - desc->thr_handler = ipipe_root_domain->irqs[irq].handler; - ipipe_root_domain->irqs[irq].handler = &kick_irqd; + if (ipipe_root_cpudom_var(irqpend_himask) != 0) + __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY); - return 0; + local_irq_restore_hw(flags); } -void __init ipipe_init_irq_threads(void) +void ___ipipe_sync_pipeline(unsigned long syncmask) { - unsigned irq; - struct irq_desc *desc; - - create_irq_threads = 1; + struct ipipe_domain *ipd = ipipe_current_domain; - for (irq = 0; irq < NR_IRQS; irq++) { - desc = irq_desc + irq; - if (desc->action != NULL || - (desc->status & IRQ_NOREQUEST) != 0) - ipipe_start_irq_thread(irq, desc); + if (ipd == ipipe_root_domain) { + if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status))) + return; } + + __ipipe_sync_stage(syncmask); } EXPORT_SYMBOL(show_stack); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 75724eee6494..7fd126564846 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) #endif generic_handle_irq(irq); -#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */ - /* If we're the only interrupt running (ignoring IRQ15 which is for - syscalls), lower our priority to IRQ14 so that softirqs run at - that level. If there's another, lower-level interrupt, irq_exit - will defer softirqs to that. */ +#ifndef CONFIG_IPIPE + /* + * If we're the only interrupt running (ignoring IRQ15 which + * is for syscalls), lower our priority to IRQ14 so that + * softirqs run at that level. If there's another, + * lower-level interrupt, irq_exit will defer softirqs to + * that. If the interrupt pipeline is enabled, we are already + * running at IRQ14 priority, so we don't need this code. + */ CSYNC(); pending = bfin_read_IPEND() & ~0x8000; other_ints = pending & (pending - 1); diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 172b4c588467..1bbacfbd4c5d 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) -/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */ + /* + * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is + * enabled. + */ if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { #endif do_timer(1); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 88de053bbe8e..21e65a339a22 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -600,6 +600,19 @@ ENTRY(_system_call) p2 = [p2]; [p2+(TASK_THREAD+THREAD_KSP)] = sp; +#ifdef CONFIG_IPIPE + r0 = sp; + SP += -12; + call ___ipipe_syscall_root; + SP += 12; + cc = r0 == 1; + if cc jump .Lsyscall_really_exit; + cc = r0 == -1; + if cc jump .Lresume_userspace; + r3 = [sp + PT_R3]; + r4 = [sp + PT_R4]; + p0 = [sp + PT_ORIG_P0]; +#endif /* CONFIG_IPIPE */ /* Check the System Call */ r7 = __NR_syscall; @@ -654,6 +667,17 @@ ENTRY(_system_call) r7 = r7 & r4; .Lsyscall_resched: +#ifdef CONFIG_IPIPE + cc = BITTST(r7, TIF_IRQ_SYNC); + if !cc jump .Lsyscall_no_irqsync; + [--sp] = reti; + r0 = [sp++]; + SP += -12; + call ___ipipe_sync_root; + SP += 12; + jump .Lresume_userspace_1; +.Lsyscall_no_irqsync: +#endif cc = BITTST(r7, TIF_NEED_RESCHED); if !cc jump .Lsyscall_sigpending; @@ -685,6 +709,10 @@ ENTRY(_system_call) .Lsyscall_really_exit: r5 = [sp + PT_RESERVED]; rets = r5; +#ifdef CONFIG_IPIPE + [--sp] = reti; + r5 = [sp++]; +#endif /* CONFIG_IPIPE */ rts; ENDPROC(_system_call) @@ -771,6 +799,15 @@ _new_old_task: ENDPROC(_resume) ENTRY(_ret_from_exception) +#ifdef CONFIG_IPIPE + [--sp] = rets; + SP += -12; + call ___ipipe_check_root + SP += 12 + rets = [sp++]; + cc = r0 == 0; + if cc jump 4f; /* not on behalf of Linux, get out */ +#endif /* CONFIG_IPIPE */ p2.l = lo(IPEND); p2.h = hi(IPEND); @@ -827,6 +864,28 @@ ENTRY(_ret_from_exception) rts; ENDPROC(_ret_from_exception) +#ifdef CONFIG_IPIPE + +_sync_root_irqs: + [--sp] = reti; /* Reenable interrupts */ + r0 = [sp++]; + jump.l ___ipipe_sync_root + +_resume_kernel_from_int: + r0.l = _sync_root_irqs + r0.h = _sync_root_irqs + [--sp] = rets; + [--sp] = ( r7:4, p5:3 ); + SP += -12; + call ___ipipe_call_irqtail + SP += 12; + ( r7:4, p5:3 ) = [sp++]; + rets = [sp++]; + rts +#else +#define _resume_kernel_from_int 2f +#endif + ENTRY(_return_from_int) /* If someone else already raised IRQ 15, do nothing. */ csync; @@ -848,7 +907,7 @@ ENTRY(_return_from_int) r1 = r0 - r1; r2 = r0 & r1; cc = r2 == 0; - if !cc jump 2f; + if !cc jump _resume_kernel_from_int; /* Lower the interrupt level to 15. */ p0.l = lo(EVT15); diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 43c4eb9acb65..0069c2dd4625 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -235,6 +235,7 @@ ENDPROC(_evt_system_call) #ifdef CONFIG_IPIPE ENTRY(___ipipe_call_irqtail) + p0 = r0; r0.l = 1f; r0.h = 1f; reti = r0; @@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail) 1: [--sp] = rets; [--sp] = ( r7:4, p5:3 ); - p0.l = ___ipipe_irq_tail_hook; - p0.h = ___ipipe_irq_tail_hook; - p0 = [p0]; sp += -12; call (p0); sp += 12; @@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = hi(EVT14); [p0] = r0; csync; - r0 = 0x401f; + r0 = 0x401f (z); sti r0; raise 14; [--sp] = reti; /* IRQs on. */ @@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = _bfin_irq_flags; r0 = [p0]; sti r0; -#if 0 /* FIXME: this actually raises scheduling latencies */ - /* Reenable interrupts */ - [--sp] = reti; - r0 = [sp++]; -#endif rts; ENDPROC(___ipipe_call_irqtail) + #endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 202494568c6c..a7d7b2dd4059 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq) static void bfin_internal_mask_irq(unsigned int irq) { + unsigned long flags; + #ifdef CONFIG_BF53x + local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; + local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & @@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq) ~(1 << mask_bit)); #endif #endif + local_irq_restore_hw(flags); } static void bfin_internal_unmask_irq(unsigned int irq) { + unsigned long flags; + #ifdef CONFIG_BF53x + local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; + local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | @@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq) (1 << mask_bit)); #endif #endif + local_irq_restore_hw(flags); } #ifdef CONFIG_PM @@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) { #ifdef CONFIG_IPIPE - _set_irq_handler(irq, handle_edge_irq); + _set_irq_handler(irq, handle_level_irq); #else struct irq_desc *desc = irq_desc + irq; /* May not call generic set_irq_handler() due to spinlock @@ -1055,13 +1065,18 @@ int __init init_arch_irq(void) #endif default: #ifdef CONFIG_IPIPE - /* - * We want internal interrupt sources to be masked, because - * ISRs may trigger interrupts recursively (e.g. DMA), but - * interrupts are _not_ masked at CPU level. So let's handle - * them as level interrupts. - */ - set_irq_handler(irq, handle_level_irq); + /* + * We want internal interrupt sources to be + * masked, because ISRs may trigger interrupts + * recursively (e.g. DMA), but interrupts are + * _not_ masked at CPU level. So let's handle + * most of them as level interrupts, except + * the timer interrupt which is special. + */ + if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR) + set_irq_handler(irq, handle_simple_irq); + else + set_irq_handler(irq, handle_level_irq); #else /* !CONFIG_IPIPE */ set_irq_handler(irq, handle_simple_irq); #endif /* !CONFIG_IPIPE */ @@ -1123,9 +1138,8 @@ int __init init_arch_irq(void) #ifdef CONFIG_IPIPE for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); desc->ic_prio = __ipipe_get_irq_priority(irq); - desc->thr_prio = __ipipe_get_irqthread_priority(irq); } #endif /* CONFIG_IPIPE */ @@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq) return IVG15; } -int __ipipe_get_irqthread_priority(unsigned irq) -{ - int ient, prio; - int demux_irq; - - /* The returned priority value is rescaled to [0..IVG13+1] - * with 0 being the lowest effective priority level. */ - - if (irq <= IRQ_CORETMR) - return IVG13 - irq + 1; - - /* GPIO IRQs are given the priority of the demux - * interrupt. */ - if (IS_GPIOIRQ(irq)) { -#if defined(CONFIG_BF54x) - u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]); - demux_irq = (bank == 0 ? IRQ_PINT0 : - bank == 1 ? IRQ_PINT1 : - bank == 2 ? IRQ_PINT2 : - IRQ_PINT3); -#elif defined(CONFIG_BF561) - demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA : - irq >= IRQ_PF16 ? IRQ_PROG1_INTA : - IRQ_PROG0_INTA); -#elif defined(CONFIG_BF52x) - demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA : - irq >= IRQ_PG0 ? IRQ_PORTG_INTA : - IRQ_PORTF_INTA); -#else - demux_irq = irq; -#endif - return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1; - } - - /* The GPIO demux interrupt is given a lower priority - * than the GPIO IRQs, so that its threaded handler - * unmasks the interrupt line after the decoded IRQs - * have been processed. */ - prio = PRIO_GPIODEMUX(irq); - /* demux irq? */ - if (prio != -1) - return IVG13 - prio; - - for (ient = 0; ient < NR_PERI_INTS; ient++) { - struct ivgx *ivg = ivg_table + ient; - if (ivg->irqno == irq) { - for (prio = 0; prio <= IVG13-IVG7; prio++) { - if (ivg7_13[prio].ifirst <= ivg && - ivg7_13[prio].istop > ivg) - return IVG7 - prio; - } - } - } - - return 0; -} - /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */ #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); + struct ipipe_domain *this_domain = ipipe_current_domain; struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; - int irq; + int irq, s; if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto handle_irq; + goto core_tick; } SSYNC(); @@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) irq = ivg->irqno; if (irq == IRQ_SYSTMR) { +#ifdef CONFIG_GENERIC_CLOCKEVENTS +core_tick: +#else bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ +#endif /* This is basically what we need from the register frame. */ __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend; __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc; - if (!ipipe_root_domain_p) - __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; - else + if (this_domain != ipipe_root_domain) __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10; + else + __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; } -handle_irq: +#ifndef CONFIG_GENERIC_CLOCKEVENTS +core_tick: +#endif + if (this_domain == ipipe_root_domain) { + s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); + barrier(); + } ipipe_trace_irq_entry(irq); __ipipe_handle_irq(irq, regs); - ipipe_trace_irq_exit(irq); + ipipe_trace_irq_exit(irq); - if (ipipe_root_domain_p) - return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); + if (this_domain == ipipe_root_domain) { + set_thread_flag(TIF_IRQ_SYNC); + if (!s) { + __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status); + return !test_bit(IPIPE_STALL_FLAG, &p->status); + } + } return 0; } -- cgit v1.2.3 From 8bf6774d7fe44ada94bb8df50f089c6e60bdfb26 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Mar 2009 11:34:10 +0800 Subject: Blackfin arch: Enable Write Back Cache on all Blackfin Boards Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF527-EZKIT_defconfig | 4 ++-- arch/blackfin/configs/BF533-EZKIT_defconfig | 4 ++-- arch/blackfin/configs/BF533-STAMP_defconfig | 4 ++-- arch/blackfin/configs/BF537-STAMP_defconfig | 4 ++-- arch/blackfin/configs/BF538-EZKIT_defconfig | 4 ++-- arch/blackfin/configs/BF548-EZKIT_defconfig | 4 ++-- arch/blackfin/configs/BF561-EZKIT_defconfig | 4 ++-- arch/blackfin/configs/BlackStamp_defconfig | 4 ++-- arch/blackfin/configs/CM-BF527_defconfig | 4 ++-- arch/blackfin/configs/CM-BF548_defconfig | 4 ++-- arch/blackfin/configs/SRV1_defconfig | 4 ++-- 11 files changed, 22 insertions(+), 22 deletions(-) diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 833128b39724..a50050f17706 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 334c94b51c40..0a2a00d63887 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 9d733436e300..eb027587a355 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index c61b6000a9eb..9e62b9f40eb1 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index cb32f5624a1b..dd6ad6be1c87 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 0f8697618aa5..b41dbd08c2c6 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 042c7adfccfa..69714fb3e608 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 3a20e281d23c..017c6ea071b5 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 865ed85a5760..d880ef786770 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index efe9741b1f14..542ebc5436ad 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index fa580affc9d6..a46529c6ade3 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # -- cgit v1.2.3 From 8c882f64130071eaebdc0861bee34a73e436f004 Mon Sep 17 00:00:00 2001 From: Adrian-Ken Rueegsegger Date: Wed, 4 Mar 2009 14:43:52 +0800 Subject: crypto: Fix dead links Signed-off-by: Adrian-Ken Rueegsegger Signed-off-by: Herbert Xu --- crypto/gf128mul.c | 2 +- crypto/sha256_generic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/gf128mul.c b/crypto/gf128mul.c index ecbeaa1f17e1..a90d260528d4 100644 --- a/crypto/gf128mul.c +++ b/crypto/gf128mul.c @@ -4,7 +4,7 @@ * Copyright (c) 2006, Rik Snel * * Based on Dr Brian Gladman's (GPL'd) work published at - * http://fp.gladman.plus.com/cryptography_technology/index.htm + * http://gladman.plushost.co.uk/oldsite/cryptography_technology/index.php * See the original copyright notice below. * * This program is free software; you can redistribute it and/or modify it diff --git a/crypto/sha256_generic.c b/crypto/sha256_generic.c index caa3542e6ce8..6349d8339d37 100644 --- a/crypto/sha256_generic.c +++ b/crypto/sha256_generic.c @@ -2,7 +2,7 @@ * Cryptographic API. * * SHA-256, as specified in - * http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf + * http://csrc.nist.gov/groups/STM/cavp/documents/shs/sha256-384-512.pdf * * SHA-256 code by Jean-Luc Cooke . * -- cgit v1.2.3 From e9cc8bddaea3944fabfebb968bc88d603239beed Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 Mar 2009 14:53:30 +0800 Subject: netlink: Move netlink attribute parsing support to lib Netlink attribute parsing may be used even if CONFIG_NET is not set. Move it from net/netlink to lib and control its inclusion based on the new config symbol CONFIG_NLATTR, which is selected by CONFIG_NET. Signed-off-by: Geert Uytterhoeven Acked-by: David S. Miller Signed-off-by: Herbert Xu --- lib/Kconfig | 6 + lib/Makefile | 2 + lib/nlattr.c | 473 +++++++++++++++++++++++++++++++++++++++++++++++++++ net/Kconfig | 1 + net/netlink/Makefile | 2 +- net/netlink/attr.c | 473 --------------------------------------------------- 6 files changed, 483 insertions(+), 474 deletions(-) create mode 100644 lib/nlattr.c delete mode 100644 net/netlink/attr.c diff --git a/lib/Kconfig b/lib/Kconfig index 03c2c24b9083..cea9e30a88ff 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -174,4 +174,10 @@ config DISABLE_OBSOLETE_CPUMASK_FUNCTIONS bool "Disable obsolete cpumask functions" if DEBUG_PER_CPU_MAPS depends on EXPERIMENTAL && BROKEN +# +# Netlink attribute parsing support is select'ed if needed +# +config NLATTR + bool + endmenu diff --git a/lib/Makefile b/lib/Makefile index 32b0e64ded27..b2c09da02cae 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -84,6 +84,8 @@ obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o obj-$(CONFIG_DYNAMIC_PRINTK_DEBUG) += dynamic_printk.o +obj-$(CONFIG_NLATTR) += nlattr.o + hostprogs-y := gen_crc32table clean-files := crc32table.h diff --git a/lib/nlattr.c b/lib/nlattr.c new file mode 100644 index 000000000000..56c3ce7fe29a --- /dev/null +++ b/lib/nlattr.c @@ -0,0 +1,473 @@ +/* + * NETLINK Netlink attributes + * + * Authors: Thomas Graf + * Alexey Kuznetsov + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = { + [NLA_U8] = sizeof(u8), + [NLA_U16] = sizeof(u16), + [NLA_U32] = sizeof(u32), + [NLA_U64] = sizeof(u64), + [NLA_NESTED] = NLA_HDRLEN, +}; + +static int validate_nla(struct nlattr *nla, int maxtype, + const struct nla_policy *policy) +{ + const struct nla_policy *pt; + int minlen = 0, attrlen = nla_len(nla), type = nla_type(nla); + + if (type <= 0 || type > maxtype) + return 0; + + pt = &policy[type]; + + BUG_ON(pt->type > NLA_TYPE_MAX); + + switch (pt->type) { + case NLA_FLAG: + if (attrlen > 0) + return -ERANGE; + break; + + case NLA_NUL_STRING: + if (pt->len) + minlen = min_t(int, attrlen, pt->len + 1); + else + minlen = attrlen; + + if (!minlen || memchr(nla_data(nla), '\0', minlen) == NULL) + return -EINVAL; + /* fall through */ + + case NLA_STRING: + if (attrlen < 1) + return -ERANGE; + + if (pt->len) { + char *buf = nla_data(nla); + + if (buf[attrlen - 1] == '\0') + attrlen--; + + if (attrlen > pt->len) + return -ERANGE; + } + break; + + case NLA_BINARY: + if (pt->len && attrlen > pt->len) + return -ERANGE; + break; + + case NLA_NESTED_COMPAT: + if (attrlen < pt->len) + return -ERANGE; + if (attrlen < NLA_ALIGN(pt->len)) + break; + if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN) + return -ERANGE; + nla = nla_data(nla) + NLA_ALIGN(pt->len); + if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN + nla_len(nla)) + return -ERANGE; + break; + case NLA_NESTED: + /* a nested attributes is allowed to be empty; if its not, + * it must have a size of at least NLA_HDRLEN. + */ + if (attrlen == 0) + break; + default: + if (pt->len) + minlen = pt->len; + else if (pt->type != NLA_UNSPEC) + minlen = nla_attr_minlen[pt->type]; + + if (attrlen < minlen) + return -ERANGE; + } + + return 0; +} + +/** + * nla_validate - Validate a stream of attributes + * @head: head of attribute stream + * @len: length of attribute stream + * @maxtype: maximum attribute type to be expected + * @policy: validation policy + * + * Validates all attributes in the specified attribute stream against the + * specified policy. Attributes with a type exceeding maxtype will be + * ignored. See documenation of struct nla_policy for more details. + * + * Returns 0 on success or a negative error code. + */ +int nla_validate(struct nlattr *head, int len, int maxtype, + const struct nla_policy *policy) +{ + struct nlattr *nla; + int rem, err; + + nla_for_each_attr(nla, head, len, rem) { + err = validate_nla(nla, maxtype, policy); + if (err < 0) + goto errout; + } + + err = 0; +errout: + return err; +} + +/** + * nla_parse - Parse a stream of attributes into a tb buffer + * @tb: destination array with maxtype+1 elements + * @maxtype: maximum attribute type to be expected + * @head: head of attribute stream + * @len: length of attribute stream + * @policy: validation policy + * + * Parses a stream of attributes and stores a pointer to each attribute in + * the tb array accessable via the attribute type. Attributes with a type + * exceeding maxtype will be silently ignored for backwards compatibility + * reasons. policy may be set to NULL if no validation is required. + * + * Returns 0 on success or a negative error code. + */ +int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len, + const struct nla_policy *policy) +{ + struct nlattr *nla; + int rem, err; + + memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1)); + + nla_for_each_attr(nla, head, len, rem) { + u16 type = nla_type(nla); + + if (type > 0 && type <= maxtype) { + if (policy) { + err = validate_nla(nla, maxtype, policy); + if (err < 0) + goto errout; + } + + tb[type] = nla; + } + } + + if (unlikely(rem > 0)) + printk(KERN_WARNING "netlink: %d bytes leftover after parsing " + "attributes.\n", rem); + + err = 0; +errout: + return err; +} + +/** + * nla_find - Find a specific attribute in a stream of attributes + * @head: head of attribute stream + * @len: length of attribute stream + * @attrtype: type of attribute to look for + * + * Returns the first attribute in the stream matching the specified type. + */ +struct nlattr *nla_find(struct nlattr *head, int len, int attrtype) +{ + struct nlattr *nla; + int rem; + + nla_for_each_attr(nla, head, len, rem) + if (nla_type(nla) == attrtype) + return nla; + + return NULL; +} + +/** + * nla_strlcpy - Copy string attribute payload into a sized buffer + * @dst: where to copy the string to + * @nla: attribute to copy the string from + * @dstsize: size of destination buffer + * + * Copies at most dstsize - 1 bytes into the destination buffer. + * The result is always a valid NUL-terminated string. Unlike + * strlcpy the destination buffer is always padded out. + * + * Returns the length of the source buffer. + */ +size_t nla_strlcpy(char *dst, const struct nlattr *nla, size_t dstsize) +{ + size_t srclen = nla_len(nla); + char *src = nla_data(nla); + + if (srclen > 0 && src[srclen - 1] == '\0') + srclen--; + + if (dstsize > 0) { + size_t len = (srclen >= dstsize) ? dstsize - 1 : srclen; + + memset(dst, 0, dstsize); + memcpy(dst, src, len); + } + + return srclen; +} + +/** + * nla_memcpy - Copy a netlink attribute into another memory area + * @dest: where to copy to memcpy + * @src: netlink attribute to copy from + * @count: size of the destination area + * + * Note: The number of bytes copied is limited by the length of + * attribute's payload. memcpy + * + * Returns the number of bytes copied. + */ +int nla_memcpy(void *dest, const struct nlattr *src, int count) +{ + int minlen = min_t(int, count, nla_len(src)); + + memcpy(dest, nla_data(src), minlen); + + return minlen; +} + +/** + * nla_memcmp - Compare an attribute with sized memory area + * @nla: netlink attribute + * @data: memory area + * @size: size of memory area + */ +int nla_memcmp(const struct nlattr *nla, const void *data, + size_t size) +{ + int d = nla_len(nla) - size; + + if (d == 0) + d = memcmp(nla_data(nla), data, size); + + return d; +} + +/** + * nla_strcmp - Compare a string attribute against a string + * @nla: netlink string attribute + * @str: another string + */ +int nla_strcmp(const struct nlattr *nla, const char *str) +{ + int len = strlen(str) + 1; + int d = nla_len(nla) - len; + + if (d == 0) + d = memcmp(nla_data(nla), str, len); + + return d; +} + +/** + * __nla_reserve - reserve room for attribute on the skb + * @skb: socket buffer to reserve room on + * @attrtype: attribute type + * @attrlen: length of attribute payload + * + * Adds a netlink attribute header to a socket buffer and reserves + * room for the payload but does not copy it. + * + * The caller is responsible to ensure that the skb provides enough + * tailroom for the attribute header and payload. + */ +struct nlattr *__nla_reserve(struct sk_buff *skb, int attrtype, int attrlen) +{ + struct nlattr *nla; + + nla = (struct nlattr *) skb_put(skb, nla_total_size(attrlen)); + nla->nla_type = attrtype; + nla->nla_len = nla_attr_size(attrlen); + + memset((unsigned char *) nla + nla->nla_len, 0, nla_padlen(attrlen)); + + return nla; +} + +/** + * __nla_reserve_nohdr - reserve room for attribute without header + * @skb: socket buffer to reserve room on + * @attrlen: length of attribute payload + * + * Reserves room for attribute payload without a header. + * + * The caller is responsible to ensure that the skb provides enough + * tailroom for the payload. + */ +void *__nla_reserve_nohdr(struct sk_buff *skb, int attrlen) +{ + void *start; + + start = skb_put(skb, NLA_ALIGN(attrlen)); + memset(start, 0, NLA_ALIGN(attrlen)); + + return start; +} + +/** + * nla_reserve - reserve room for attribute on the skb + * @skb: socket buffer to reserve room on + * @attrtype: attribute type + * @attrlen: length of attribute payload + * + * Adds a netlink attribute header to a socket buffer and reserves + * room for the payload but does not copy it. + * + * Returns NULL if the tailroom of the skb is insufficient to store + * the attribute header and payload. + */ +struct nlattr *nla_reserve(struct sk_buff *skb, int attrtype, int attrlen) +{ + if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen))) + return NULL; + + return __nla_reserve(skb, attrtype, attrlen); +} + +/** + * nla_reserve_nohdr - reserve room for attribute without header + * @skb: socket buffer to reserve room on + * @attrlen: length of attribute payload + * + * Reserves room for attribute payload without a header. + * + * Returns NULL if the tailroom of the skb is insufficient to store + * the attribute payload. + */ +void *nla_reserve_nohdr(struct sk_buff *skb, int attrlen) +{ + if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) + return NULL; + + return __nla_reserve_nohdr(skb, attrlen); +} + +/** + * __nla_put - Add a netlink attribute to a socket buffer + * @skb: socket buffer to add attribute to + * @attrtype: attribute type + * @attrlen: length of attribute payload + * @data: head of attribute payload + * + * The caller is responsible to ensure that the skb provides enough + * tailroom for the attribute header and payload. + */ +void __nla_put(struct sk_buff *skb, int attrtype, int attrlen, + const void *data) +{ + struct nlattr *nla; + + nla = __nla_reserve(skb, attrtype, attrlen); + memcpy(nla_data(nla), data, attrlen); +} + +/** + * __nla_put_nohdr - Add a netlink attribute without header + * @skb: socket buffer to add attribute to + * @attrlen: length of attribute payload + * @data: head of attribute payload + * + * The caller is responsible to ensure that the skb provides enough + * tailroom for the attribute payload. + */ +void __nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) +{ + void *start; + + start = __nla_reserve_nohdr(skb, attrlen); + memcpy(start, data, attrlen); +} + +/** + * nla_put - Add a netlink attribute to a socket buffer + * @skb: socket buffer to add attribute to + * @attrtype: attribute type + * @attrlen: length of attribute payload + * @data: head of attribute payload + * + * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store + * the attribute header and payload. + */ +int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data) +{ + if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen))) + return -EMSGSIZE; + + __nla_put(skb, attrtype, attrlen, data); + return 0; +} + +/** + * nla_put_nohdr - Add a netlink attribute without header + * @skb: socket buffer to add attribute to + * @attrlen: length of attribute payload + * @data: head of attribute payload + * + * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store + * the attribute payload. + */ +int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) +{ + if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) + return -EMSGSIZE; + + __nla_put_nohdr(skb, attrlen, data); + return 0; +} + +/** + * nla_append - Add a netlink attribute without header or padding + * @skb: socket buffer to add attribute to + * @attrlen: length of attribute payload + * @data: head of attribute payload + * + * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store + * the attribute payload. + */ +int nla_append(struct sk_buff *skb, int attrlen, const void *data) +{ + if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) + return -EMSGSIZE; + + memcpy(skb_put(skb, attrlen), data, attrlen); + return 0; +} + +EXPORT_SYMBOL(nla_validate); +EXPORT_SYMBOL(nla_parse); +EXPORT_SYMBOL(nla_find); +EXPORT_SYMBOL(nla_strlcpy); +EXPORT_SYMBOL(__nla_reserve); +EXPORT_SYMBOL(__nla_reserve_nohdr); +EXPORT_SYMBOL(nla_reserve); +EXPORT_SYMBOL(nla_reserve_nohdr); +EXPORT_SYMBOL(__nla_put); +EXPORT_SYMBOL(__nla_put_nohdr); +EXPORT_SYMBOL(nla_put); +EXPORT_SYMBOL(nla_put_nohdr); +EXPORT_SYMBOL(nla_memcpy); +EXPORT_SYMBOL(nla_memcmp); +EXPORT_SYMBOL(nla_strcmp); +EXPORT_SYMBOL(nla_append); diff --git a/net/Kconfig b/net/Kconfig index cdb8fdef6c4a..eab40a481356 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -4,6 +4,7 @@ menuconfig NET bool "Networking support" + select NLATTR ---help--- Unless you really know what you are doing, you should say Y here. The reason is that some programs need kernel networking support even diff --git a/net/netlink/Makefile b/net/netlink/Makefile index e3589c2de49e..bdd6ddf4e95b 100644 --- a/net/netlink/Makefile +++ b/net/netlink/Makefile @@ -2,4 +2,4 @@ # Makefile for the netlink driver. # -obj-y := af_netlink.o attr.o genetlink.o +obj-y := af_netlink.o genetlink.o diff --git a/net/netlink/attr.c b/net/netlink/attr.c deleted file mode 100644 index 56c3ce7fe29a..000000000000 --- a/net/netlink/attr.c +++ /dev/null @@ -1,473 +0,0 @@ -/* - * NETLINK Netlink attributes - * - * Authors: Thomas Graf - * Alexey Kuznetsov - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = { - [NLA_U8] = sizeof(u8), - [NLA_U16] = sizeof(u16), - [NLA_U32] = sizeof(u32), - [NLA_U64] = sizeof(u64), - [NLA_NESTED] = NLA_HDRLEN, -}; - -static int validate_nla(struct nlattr *nla, int maxtype, - const struct nla_policy *policy) -{ - const struct nla_policy *pt; - int minlen = 0, attrlen = nla_len(nla), type = nla_type(nla); - - if (type <= 0 || type > maxtype) - return 0; - - pt = &policy[type]; - - BUG_ON(pt->type > NLA_TYPE_MAX); - - switch (pt->type) { - case NLA_FLAG: - if (attrlen > 0) - return -ERANGE; - break; - - case NLA_NUL_STRING: - if (pt->len) - minlen = min_t(int, attrlen, pt->len + 1); - else - minlen = attrlen; - - if (!minlen || memchr(nla_data(nla), '\0', minlen) == NULL) - return -EINVAL; - /* fall through */ - - case NLA_STRING: - if (attrlen < 1) - return -ERANGE; - - if (pt->len) { - char *buf = nla_data(nla); - - if (buf[attrlen - 1] == '\0') - attrlen--; - - if (attrlen > pt->len) - return -ERANGE; - } - break; - - case NLA_BINARY: - if (pt->len && attrlen > pt->len) - return -ERANGE; - break; - - case NLA_NESTED_COMPAT: - if (attrlen < pt->len) - return -ERANGE; - if (attrlen < NLA_ALIGN(pt->len)) - break; - if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN) - return -ERANGE; - nla = nla_data(nla) + NLA_ALIGN(pt->len); - if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN + nla_len(nla)) - return -ERANGE; - break; - case NLA_NESTED: - /* a nested attributes is allowed to be empty; if its not, - * it must have a size of at least NLA_HDRLEN. - */ - if (attrlen == 0) - break; - default: - if (pt->len) - minlen = pt->len; - else if (pt->type != NLA_UNSPEC) - minlen = nla_attr_minlen[pt->type]; - - if (attrlen < minlen) - return -ERANGE; - } - - return 0; -} - -/** - * nla_validate - Validate a stream of attributes - * @head: head of attribute stream - * @len: length of attribute stream - * @maxtype: maximum attribute type to be expected - * @policy: validation policy - * - * Validates all attributes in the specified attribute stream against the - * specified policy. Attributes with a type exceeding maxtype will be - * ignored. See documenation of struct nla_policy for more details. - * - * Returns 0 on success or a negative error code. - */ -int nla_validate(struct nlattr *head, int len, int maxtype, - const struct nla_policy *policy) -{ - struct nlattr *nla; - int rem, err; - - nla_for_each_attr(nla, head, len, rem) { - err = validate_nla(nla, maxtype, policy); - if (err < 0) - goto errout; - } - - err = 0; -errout: - return err; -} - -/** - * nla_parse - Parse a stream of attributes into a tb buffer - * @tb: destination array with maxtype+1 elements - * @maxtype: maximum attribute type to be expected - * @head: head of attribute stream - * @len: length of attribute stream - * @policy: validation policy - * - * Parses a stream of attributes and stores a pointer to each attribute in - * the tb array accessable via the attribute type. Attributes with a type - * exceeding maxtype will be silently ignored for backwards compatibility - * reasons. policy may be set to NULL if no validation is required. - * - * Returns 0 on success or a negative error code. - */ -int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len, - const struct nla_policy *policy) -{ - struct nlattr *nla; - int rem, err; - - memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1)); - - nla_for_each_attr(nla, head, len, rem) { - u16 type = nla_type(nla); - - if (type > 0 && type <= maxtype) { - if (policy) { - err = validate_nla(nla, maxtype, policy); - if (err < 0) - goto errout; - } - - tb[type] = nla; - } - } - - if (unlikely(rem > 0)) - printk(KERN_WARNING "netlink: %d bytes leftover after parsing " - "attributes.\n", rem); - - err = 0; -errout: - return err; -} - -/** - * nla_find - Find a specific attribute in a stream of attributes - * @head: head of attribute stream - * @len: length of attribute stream - * @attrtype: type of attribute to look for - * - * Returns the first attribute in the stream matching the specified type. - */ -struct nlattr *nla_find(struct nlattr *head, int len, int attrtype) -{ - struct nlattr *nla; - int rem; - - nla_for_each_attr(nla, head, len, rem) - if (nla_type(nla) == attrtype) - return nla; - - return NULL; -} - -/** - * nla_strlcpy - Copy string attribute payload into a sized buffer - * @dst: where to copy the string to - * @nla: attribute to copy the string from - * @dstsize: size of destination buffer - * - * Copies at most dstsize - 1 bytes into the destination buffer. - * The result is always a valid NUL-terminated string. Unlike - * strlcpy the destination buffer is always padded out. - * - * Returns the length of the source buffer. - */ -size_t nla_strlcpy(char *dst, const struct nlattr *nla, size_t dstsize) -{ - size_t srclen = nla_len(nla); - char *src = nla_data(nla); - - if (srclen > 0 && src[srclen - 1] == '\0') - srclen--; - - if (dstsize > 0) { - size_t len = (srclen >= dstsize) ? dstsize - 1 : srclen; - - memset(dst, 0, dstsize); - memcpy(dst, src, len); - } - - return srclen; -} - -/** - * nla_memcpy - Copy a netlink attribute into another memory area - * @dest: where to copy to memcpy - * @src: netlink attribute to copy from - * @count: size of the destination area - * - * Note: The number of bytes copied is limited by the length of - * attribute's payload. memcpy - * - * Returns the number of bytes copied. - */ -int nla_memcpy(void *dest, const struct nlattr *src, int count) -{ - int minlen = min_t(int, count, nla_len(src)); - - memcpy(dest, nla_data(src), minlen); - - return minlen; -} - -/** - * nla_memcmp - Compare an attribute with sized memory area - * @nla: netlink attribute - * @data: memory area - * @size: size of memory area - */ -int nla_memcmp(const struct nlattr *nla, const void *data, - size_t size) -{ - int d = nla_len(nla) - size; - - if (d == 0) - d = memcmp(nla_data(nla), data, size); - - return d; -} - -/** - * nla_strcmp - Compare a string attribute against a string - * @nla: netlink string attribute - * @str: another string - */ -int nla_strcmp(const struct nlattr *nla, const char *str) -{ - int len = strlen(str) + 1; - int d = nla_len(nla) - len; - - if (d == 0) - d = memcmp(nla_data(nla), str, len); - - return d; -} - -/** - * __nla_reserve - reserve room for attribute on the skb - * @skb: socket buffer to reserve room on - * @attrtype: attribute type - * @attrlen: length of attribute payload - * - * Adds a netlink attribute header to a socket buffer and reserves - * room for the payload but does not copy it. - * - * The caller is responsible to ensure that the skb provides enough - * tailroom for the attribute header and payload. - */ -struct nlattr *__nla_reserve(struct sk_buff *skb, int attrtype, int attrlen) -{ - struct nlattr *nla; - - nla = (struct nlattr *) skb_put(skb, nla_total_size(attrlen)); - nla->nla_type = attrtype; - nla->nla_len = nla_attr_size(attrlen); - - memset((unsigned char *) nla + nla->nla_len, 0, nla_padlen(attrlen)); - - return nla; -} - -/** - * __nla_reserve_nohdr - reserve room for attribute without header - * @skb: socket buffer to reserve room on - * @attrlen: length of attribute payload - * - * Reserves room for attribute payload without a header. - * - * The caller is responsible to ensure that the skb provides enough - * tailroom for the payload. - */ -void *__nla_reserve_nohdr(struct sk_buff *skb, int attrlen) -{ - void *start; - - start = skb_put(skb, NLA_ALIGN(attrlen)); - memset(start, 0, NLA_ALIGN(attrlen)); - - return start; -} - -/** - * nla_reserve - reserve room for attribute on the skb - * @skb: socket buffer to reserve room on - * @attrtype: attribute type - * @attrlen: length of attribute payload - * - * Adds a netlink attribute header to a socket buffer and reserves - * room for the payload but does not copy it. - * - * Returns NULL if the tailroom of the skb is insufficient to store - * the attribute header and payload. - */ -struct nlattr *nla_reserve(struct sk_buff *skb, int attrtype, int attrlen) -{ - if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen))) - return NULL; - - return __nla_reserve(skb, attrtype, attrlen); -} - -/** - * nla_reserve_nohdr - reserve room for attribute without header - * @skb: socket buffer to reserve room on - * @attrlen: length of attribute payload - * - * Reserves room for attribute payload without a header. - * - * Returns NULL if the tailroom of the skb is insufficient to store - * the attribute payload. - */ -void *nla_reserve_nohdr(struct sk_buff *skb, int attrlen) -{ - if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) - return NULL; - - return __nla_reserve_nohdr(skb, attrlen); -} - -/** - * __nla_put - Add a netlink attribute to a socket buffer - * @skb: socket buffer to add attribute to - * @attrtype: attribute type - * @attrlen: length of attribute payload - * @data: head of attribute payload - * - * The caller is responsible to ensure that the skb provides enough - * tailroom for the attribute header and payload. - */ -void __nla_put(struct sk_buff *skb, int attrtype, int attrlen, - const void *data) -{ - struct nlattr *nla; - - nla = __nla_reserve(skb, attrtype, attrlen); - memcpy(nla_data(nla), data, attrlen); -} - -/** - * __nla_put_nohdr - Add a netlink attribute without header - * @skb: socket buffer to add attribute to - * @attrlen: length of attribute payload - * @data: head of attribute payload - * - * The caller is responsible to ensure that the skb provides enough - * tailroom for the attribute payload. - */ -void __nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) -{ - void *start; - - start = __nla_reserve_nohdr(skb, attrlen); - memcpy(start, data, attrlen); -} - -/** - * nla_put - Add a netlink attribute to a socket buffer - * @skb: socket buffer to add attribute to - * @attrtype: attribute type - * @attrlen: length of attribute payload - * @data: head of attribute payload - * - * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store - * the attribute header and payload. - */ -int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data) -{ - if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen))) - return -EMSGSIZE; - - __nla_put(skb, attrtype, attrlen, data); - return 0; -} - -/** - * nla_put_nohdr - Add a netlink attribute without header - * @skb: socket buffer to add attribute to - * @attrlen: length of attribute payload - * @data: head of attribute payload - * - * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store - * the attribute payload. - */ -int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) -{ - if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) - return -EMSGSIZE; - - __nla_put_nohdr(skb, attrlen, data); - return 0; -} - -/** - * nla_append - Add a netlink attribute without header or padding - * @skb: socket buffer to add attribute to - * @attrlen: length of attribute payload - * @data: head of attribute payload - * - * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store - * the attribute payload. - */ -int nla_append(struct sk_buff *skb, int attrlen, const void *data) -{ - if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) - return -EMSGSIZE; - - memcpy(skb_put(skb, attrlen), data, attrlen); - return 0; -} - -EXPORT_SYMBOL(nla_validate); -EXPORT_SYMBOL(nla_parse); -EXPORT_SYMBOL(nla_find); -EXPORT_SYMBOL(nla_strlcpy); -EXPORT_SYMBOL(__nla_reserve); -EXPORT_SYMBOL(__nla_reserve_nohdr); -EXPORT_SYMBOL(nla_reserve); -EXPORT_SYMBOL(nla_reserve_nohdr); -EXPORT_SYMBOL(__nla_put); -EXPORT_SYMBOL(__nla_put_nohdr); -EXPORT_SYMBOL(nla_put); -EXPORT_SYMBOL(nla_put_nohdr); -EXPORT_SYMBOL(nla_memcpy); -EXPORT_SYMBOL(nla_memcmp); -EXPORT_SYMBOL(nla_strcmp); -EXPORT_SYMBOL(nla_append); -- cgit v1.2.3 From a1d2f09544065b60598b8167d94a6371bff3e892 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 Mar 2009 15:05:33 +0800 Subject: crypto: compress - Add pcomp interface The current "comp" crypto interface supports one-shot (de)compression only, i.e. the whole data buffer to be (de)compressed must be passed at once, and the whole (de)compressed data buffer will be received at once. In several use-cases (e.g. compressed file systems that store files in big compressed blocks), this workflow is not suitable. Furthermore, the "comp" type doesn't provide for the configuration of (de)compression parameters, and always allocates workspace memory for both compression and decompression, which may waste memory. To solve this, add a "pcomp" partial (de)compression interface that provides the following operations: - crypto_compress_{init,update,final}() for compression, - crypto_decompress_{init,update,final}() for decompression, - crypto_{,de}compress_setup(), to configure (de)compression parameters (incl. allocating workspace memory). The (de)compression methods take a struct comp_request, which was mimicked after the z_stream object in zlib, and contains buffer pointer and length pairs for input and output. The setup methods take an opaque parameter pointer and length pair. Parameters are supposed to be encoded using netlink attributes, whose meanings depend on the actual (name of the) (de)compression algorithm. Signed-off-by: Geert Uytterhoeven Signed-off-by: Herbert Xu --- crypto/Kconfig | 4 ++ crypto/Makefile | 2 + crypto/pcompress.c | 97 ++++++++++++++++++++++++++++ include/crypto/compress.h | 125 +++++++++++++++++++++++++++++++++++++ include/crypto/internal/compress.h | 28 +++++++++ include/linux/crypto.h | 1 + 6 files changed, 257 insertions(+) create mode 100644 crypto/pcompress.c create mode 100644 include/crypto/compress.h create mode 100644 include/crypto/internal/compress.h diff --git a/crypto/Kconfig b/crypto/Kconfig index 4a3e6b225189..1676f171c54b 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -76,6 +76,10 @@ config CRYPTO_RNG2 tristate select CRYPTO_ALGAPI2 +config CRYPTO_PCOMP + tristate + select CRYPTO_ALGAPI2 + config CRYPTO_MANAGER tristate "Cryptographic algorithm manager" select CRYPTO_MANAGER2 diff --git a/crypto/Makefile b/crypto/Makefile index e05a844e08d5..1132a678b253 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -27,6 +27,8 @@ crypto_hash-objs += ahash.o crypto_hash-objs += shash.o obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o +obj-$(CONFIG_CRYPTO_PCOMP) += pcompress.o + cryptomgr-objs := algboss.o testmgr.o obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o diff --git a/crypto/pcompress.c b/crypto/pcompress.c new file mode 100644 index 000000000000..ca9a4af91efe --- /dev/null +++ b/crypto/pcompress.c @@ -0,0 +1,97 @@ +/* + * Cryptographic API. + * + * Partial (de)compression operations. + * + * Copyright 2008 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + * If not, see . + */ + +#include +#include +#include +#include +#include + +#include + +#include "internal.h" + + +static int crypto_pcomp_init(struct crypto_tfm *tfm, u32 type, u32 mask) +{ + return 0; +} + +static unsigned int crypto_pcomp_extsize(struct crypto_alg *alg, + const struct crypto_type *frontend) +{ + return alg->cra_ctxsize; +} + +static int crypto_pcomp_init_tfm(struct crypto_tfm *tfm, + const struct crypto_type *frontend) +{ + return 0; +} + +static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg) + __attribute__ ((unused)); +static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg) +{ + seq_printf(m, "type : pcomp\n"); +} + +static const struct crypto_type crypto_pcomp_type = { + .extsize = crypto_pcomp_extsize, + .init = crypto_pcomp_init, + .init_tfm = crypto_pcomp_init_tfm, +#ifdef CONFIG_PROC_FS + .show = crypto_pcomp_show, +#endif + .maskclear = ~CRYPTO_ALG_TYPE_MASK, + .maskset = CRYPTO_ALG_TYPE_MASK, + .type = CRYPTO_ALG_TYPE_PCOMPRESS, + .tfmsize = offsetof(struct crypto_pcomp, base), +}; + +struct crypto_pcomp *crypto_alloc_pcomp(const char *alg_name, u32 type, + u32 mask) +{ + return crypto_alloc_tfm(alg_name, &crypto_pcomp_type, type, mask); +} +EXPORT_SYMBOL_GPL(crypto_alloc_pcomp); + +int crypto_register_pcomp(struct pcomp_alg *alg) +{ + struct crypto_alg *base = &alg->base; + + base->cra_type = &crypto_pcomp_type; + base->cra_flags &= ~CRYPTO_ALG_TYPE_MASK; + base->cra_flags |= CRYPTO_ALG_TYPE_PCOMPRESS; + + return crypto_register_alg(base); +} +EXPORT_SYMBOL_GPL(crypto_register_pcomp); + +int crypto_unregister_pcomp(struct pcomp_alg *alg) +{ + return crypto_unregister_alg(&alg->base); +} +EXPORT_SYMBOL_GPL(crypto_unregister_pcomp); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Partial (de)compression type"); +MODULE_AUTHOR("Sony Corporation"); diff --git a/include/crypto/compress.h b/include/crypto/compress.h new file mode 100644 index 000000000000..b7d228708d6b --- /dev/null +++ b/include/crypto/compress.h @@ -0,0 +1,125 @@ +/* + * Compress: Compression algorithms under the cryptographic API. + * + * Copyright 2008 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + * If not, see . + */ + +#ifndef _CRYPTO_COMPRESS_H +#define _CRYPTO_COMPRESS_H + +#include + + +struct comp_request { + const void *next_in; /* next input byte */ + void *next_out; /* next output byte */ + unsigned int avail_in; /* bytes available at next_in */ + unsigned int avail_out; /* bytes available at next_out */ +}; + +struct crypto_pcomp { + struct crypto_tfm base; +}; + +struct pcomp_alg { + int (*compress_setup)(struct crypto_pcomp *tfm, void *params, + unsigned int len); + int (*compress_init)(struct crypto_pcomp *tfm); + int (*compress_update)(struct crypto_pcomp *tfm, + struct comp_request *req); + int (*compress_final)(struct crypto_pcomp *tfm, + struct comp_request *req); + int (*decompress_setup)(struct crypto_pcomp *tfm, void *params, + unsigned int len); + int (*decompress_init)(struct crypto_pcomp *tfm); + int (*decompress_update)(struct crypto_pcomp *tfm, + struct comp_request *req); + int (*decompress_final)(struct crypto_pcomp *tfm, + struct comp_request *req); + + struct crypto_alg base; +}; + +extern struct crypto_pcomp *crypto_alloc_pcomp(const char *alg_name, u32 type, + u32 mask); + +static inline struct crypto_tfm *crypto_pcomp_tfm(struct crypto_pcomp *tfm) +{ + return &tfm->base; +} + +static inline void crypto_free_pcomp(struct crypto_pcomp *tfm) +{ + crypto_destroy_tfm(tfm, crypto_pcomp_tfm(tfm)); +} + +static inline struct pcomp_alg *__crypto_pcomp_alg(struct crypto_alg *alg) +{ + return container_of(alg, struct pcomp_alg, base); +} + +static inline struct pcomp_alg *crypto_pcomp_alg(struct crypto_pcomp *tfm) +{ + return __crypto_pcomp_alg(crypto_pcomp_tfm(tfm)->__crt_alg); +} + +static inline int crypto_compress_setup(struct crypto_pcomp *tfm, + void *params, unsigned int len) +{ + return crypto_pcomp_alg(tfm)->compress_setup(tfm, params, len); +} + +static inline int crypto_compress_init(struct crypto_pcomp *tfm) +{ + return crypto_pcomp_alg(tfm)->compress_init(tfm); +} + +static inline int crypto_compress_update(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + return crypto_pcomp_alg(tfm)->compress_update(tfm, req); +} + +static inline int crypto_compress_final(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + return crypto_pcomp_alg(tfm)->compress_final(tfm, req); +} + +static inline int crypto_decompress_setup(struct crypto_pcomp *tfm, + void *params, unsigned int len) +{ + return crypto_pcomp_alg(tfm)->decompress_setup(tfm, params, len); +} + +static inline int crypto_decompress_init(struct crypto_pcomp *tfm) +{ + return crypto_pcomp_alg(tfm)->decompress_init(tfm); +} + +static inline int crypto_decompress_update(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + return crypto_pcomp_alg(tfm)->decompress_update(tfm, req); +} + +static inline int crypto_decompress_final(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + return crypto_pcomp_alg(tfm)->decompress_final(tfm, req); +} + +#endif /* _CRYPTO_COMPRESS_H */ diff --git a/include/crypto/internal/compress.h b/include/crypto/internal/compress.h new file mode 100644 index 000000000000..178a888d1d93 --- /dev/null +++ b/include/crypto/internal/compress.h @@ -0,0 +1,28 @@ +/* + * Compress: Compression algorithms under the cryptographic API. + * + * Copyright 2008 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + * If not, see . + */ + +#ifndef _CRYPTO_INTERNAL_COMPRESS_H +#define _CRYPTO_INTERNAL_COMPRESS_H + +#include + +extern int crypto_register_pcomp(struct pcomp_alg *alg); +extern int crypto_unregister_pcomp(struct pcomp_alg *alg); + +#endif /* _CRYPTO_INTERNAL_COMPRESS_H */ diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 29729b834380..ec29fa268b94 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -40,6 +40,7 @@ #define CRYPTO_ALG_TYPE_SHASH 0x00000009 #define CRYPTO_ALG_TYPE_AHASH 0x0000000a #define CRYPTO_ALG_TYPE_RNG 0x0000000c +#define CRYPTO_ALG_TYPE_PCOMPRESS 0x0000000f #define CRYPTO_ALG_TYPE_HASH_MASK 0x0000000e #define CRYPTO_ALG_TYPE_AHASH_MASK 0x0000000c -- cgit v1.2.3 From 8064efb8740b8a0141d99a181cb5b9a430b1836c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 Mar 2009 15:08:03 +0800 Subject: crypto: testmgr - Add support for the pcomp interface Signed-off-by: Geert Uytterhoeven Signed-off-by: Herbert Xu --- crypto/testmgr.c | 183 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ crypto/testmgr.h | 10 +++ 2 files changed, 193 insertions(+) diff --git a/crypto/testmgr.c b/crypto/testmgr.c index a75f11ffb957..e750357b898f 100644 --- a/crypto/testmgr.c +++ b/crypto/testmgr.c @@ -72,6 +72,13 @@ struct comp_test_suite { } comp, decomp; }; +struct pcomp_test_suite { + struct { + struct pcomp_testvec *vecs; + unsigned int count; + } comp, decomp; +}; + struct hash_test_suite { struct hash_testvec *vecs; unsigned int count; @@ -86,6 +93,7 @@ struct alg_test_desc { struct aead_test_suite aead; struct cipher_test_suite cipher; struct comp_test_suite comp; + struct pcomp_test_suite pcomp; struct hash_test_suite hash; } suite; }; @@ -898,6 +906,159 @@ out: return ret; } +static int test_pcomp(struct crypto_pcomp *tfm, + struct pcomp_testvec *ctemplate, + struct pcomp_testvec *dtemplate, int ctcount, + int dtcount) +{ + const char *algo = crypto_tfm_alg_driver_name(crypto_pcomp_tfm(tfm)); + unsigned int i; + char result[COMP_BUF_SIZE]; + int error; + + for (i = 0; i < ctcount; i++) { + struct comp_request req; + + error = crypto_compress_setup(tfm, ctemplate[i].params, + ctemplate[i].paramsize); + if (error) { + pr_err("alg: pcomp: compression setup failed on test " + "%d for %s: error=%d\n", i + 1, algo, error); + return error; + } + + error = crypto_compress_init(tfm); + if (error) { + pr_err("alg: pcomp: compression init failed on test " + "%d for %s: error=%d\n", i + 1, algo, error); + return error; + } + + memset(result, 0, sizeof(result)); + + req.next_in = ctemplate[i].input; + req.avail_in = ctemplate[i].inlen / 2; + req.next_out = result; + req.avail_out = ctemplate[i].outlen / 2; + + error = crypto_compress_update(tfm, &req); + if (error && (error != -EAGAIN || req.avail_in)) { + pr_err("alg: pcomp: compression update failed on test " + "%d for %s: error=%d\n", i + 1, algo, error); + return error; + } + + /* Add remaining input data */ + req.avail_in += (ctemplate[i].inlen + 1) / 2; + + error = crypto_compress_update(tfm, &req); + if (error && (error != -EAGAIN || req.avail_in)) { + pr_err("alg: pcomp: compression update failed on test " + "%d for %s: error=%d\n", i + 1, algo, error); + return error; + } + + /* Provide remaining output space */ + req.avail_out += COMP_BUF_SIZE - ctemplate[i].outlen / 2; + + error = crypto_compress_final(tfm, &req); + if (error) { + pr_err("alg: pcomp: compression final failed on test " + "%d for %s: error=%d\n", i + 1, algo, error); + return error; + } + + if (COMP_BUF_SIZE - req.avail_out != ctemplate[i].outlen) { + pr_err("alg: comp: Compression test %d failed for %s: " + "output len = %d (expected %d)\n", i + 1, algo, + COMP_BUF_SIZE - req.avail_out, + ctemplate[i].outlen); + return -EINVAL; + } + + if (memcmp(result, ctemplate[i].output, ctemplate[i].outlen)) { + pr_err("alg: pcomp: Compression test %d failed for " + "%s\n", i + 1, algo); + hexdump(result, ctemplate[i].outlen); + return -EINVAL; + } + } + + for (i = 0; i < dtcount; i++) { + struct comp_request req; + + error = crypto_decompress_setup(tfm, dtemplate[i].params, + dtemplate[i].paramsize); + if (error) { + pr_err("alg: pcomp: decompression setup failed on " + "test %d for %s: error=%d\n", i + 1, algo, + error); + return error; + } + + error = crypto_decompress_init(tfm); + if (error) { + pr_err("alg: pcomp: decompression init failed on test " + "%d for %s: error=%d\n", i + 1, algo, error); + return error; + } + + memset(result, 0, sizeof(result)); + + req.next_in = dtemplate[i].input; + req.avail_in = dtemplate[i].inlen / 2; + req.next_out = result; + req.avail_out = dtemplate[i].outlen / 2; + + error = crypto_decompress_update(tfm, &req); + if (error && (error != -EAGAIN || req.avail_in)) { + pr_err("alg: pcomp: decompression update failed on " + "test %d for %s: error=%d\n", i + 1, algo, + error); + return error; + } + + /* Add remaining input data */ + req.avail_in += (dtemplate[i].inlen + 1) / 2; + + error = crypto_decompress_update(tfm, &req); + if (error && (error != -EAGAIN || req.avail_in)) { + pr_err("alg: pcomp: decompression update failed on " + "test %d for %s: error=%d\n", i + 1, algo, + error); + return error; + } + + /* Provide remaining output space */ + req.avail_out += COMP_BUF_SIZE - dtemplate[i].outlen / 2; + + error = crypto_decompress_final(tfm, &req); + if (error && (error != -EAGAIN || req.avail_in)) { + pr_err("alg: pcomp: decompression final failed on " + "test %d for %s: error=%d\n", i + 1, algo, + error); + return error; + } + + if (COMP_BUF_SIZE - req.avail_out != dtemplate[i].outlen) { + pr_err("alg: comp: Decompression test %d failed for " + "%s: output len = %d (expected %d)\n", i + 1, + algo, COMP_BUF_SIZE - req.avail_out, + dtemplate[i].outlen); + return -EINVAL; + } + + if (memcmp(result, dtemplate[i].output, dtemplate[i].outlen)) { + pr_err("alg: pcomp: Decompression test %d failed for " + "%s\n", i + 1, algo); + hexdump(result, dtemplate[i].outlen); + return -EINVAL; + } + } + + return 0; +} + static int alg_test_aead(const struct alg_test_desc *desc, const char *driver, u32 type, u32 mask) { @@ -1007,6 +1168,28 @@ static int alg_test_comp(const struct alg_test_desc *desc, const char *driver, return err; } +static int alg_test_pcomp(const struct alg_test_desc *desc, const char *driver, + u32 type, u32 mask) +{ + struct crypto_pcomp *tfm; + int err; + + tfm = crypto_alloc_pcomp(driver, type, mask); + if (IS_ERR(tfm)) { + pr_err("alg: pcomp: Failed to load transform for %s: %ld\n", + driver, PTR_ERR(tfm)); + return PTR_ERR(tfm); + } + + err = test_pcomp(tfm, desc->suite.pcomp.comp.vecs, + desc->suite.pcomp.decomp.vecs, + desc->suite.pcomp.comp.count, + desc->suite.pcomp.decomp.count); + + crypto_free_pcomp(tfm); + return err; +} + static int alg_test_hash(const struct alg_test_desc *desc, const char *driver, u32 type, u32 mask) { diff --git a/crypto/testmgr.h b/crypto/testmgr.h index 132953e144d3..c517e43cfc88 100644 --- a/crypto/testmgr.h +++ b/crypto/testmgr.h @@ -15,6 +15,8 @@ #ifndef _CRYPTO_TESTMGR_H #define _CRYPTO_TESTMGR_H +#include + #define MAX_DIGEST_SIZE 64 #define MAX_TAP 8 @@ -8347,6 +8349,14 @@ struct comp_testvec { char output[COMP_BUF_SIZE]; }; +struct pcomp_testvec { + void *params; + unsigned int paramsize; + int inlen, outlen; + char input[COMP_BUF_SIZE]; + char output[COMP_BUF_SIZE]; +}; + /* * Deflate test vectors (null-terminated strings). * Params: winbits=-11, Z_DEFAULT_COMPRESSION, MAX_MEM_LEVEL. -- cgit v1.2.3 From bf68e65ec9ea61e32ab71bef59aa5d24d255241f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 Mar 2009 15:15:49 +0800 Subject: crypto: zlib - New zlib crypto module, using pcomp Signed-off-by: Geert Uytterhoeven Cc: James Morris Signed-off-by: Herbert Xu --- crypto/Kconfig | 9 ++ crypto/Makefile | 1 + crypto/zlib.c | 378 ++++++++++++++++++++++++++++++++++++++++++++++ include/crypto/compress.h | 20 +++ 4 files changed, 408 insertions(+) create mode 100644 crypto/zlib.c diff --git a/crypto/Kconfig b/crypto/Kconfig index 1676f171c54b..be5d3128f8a8 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -748,6 +748,15 @@ config CRYPTO_DEFLATE You will most probably want this if using IPSec. +config CRYPTO_ZLIB + tristate "Zlib compression algorithm" + select CRYPTO_PCOMP + select ZLIB_INFLATE + select ZLIB_DEFLATE + select NLATTR + help + This is the zlib algorithm. + config CRYPTO_LZO tristate "LZO compression algorithm" select CRYPTO_ALGAPI diff --git a/crypto/Makefile b/crypto/Makefile index 1132a678b253..673d9f7c1bda 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_CRYPTO_ANUBIS) += anubis.o obj-$(CONFIG_CRYPTO_SEED) += seed.o obj-$(CONFIG_CRYPTO_SALSA20) += salsa20_generic.o obj-$(CONFIG_CRYPTO_DEFLATE) += deflate.o +obj-$(CONFIG_CRYPTO_ZLIB) += zlib.o obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o diff --git a/crypto/zlib.c b/crypto/zlib.c new file mode 100644 index 000000000000..33609bab614e --- /dev/null +++ b/crypto/zlib.c @@ -0,0 +1,378 @@ +/* + * Cryptographic API. + * + * Zlib algorithm + * + * Copyright 2008 Sony Corporation + * + * Based on deflate.c, which is + * Copyright (c) 2003 James Morris + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * FIXME: deflate transforms will require up to a total of about 436k of kernel + * memory on i386 (390k for compression, the rest for decompression), as the + * current zlib kernel code uses a worst case pre-allocation system by default. + * This needs to be fixed so that the amount of memory required is properly + * related to the winbits and memlevel parameters. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + + +struct zlib_ctx { + struct z_stream_s comp_stream; + struct z_stream_s decomp_stream; + int decomp_windowBits; +}; + + +static void zlib_comp_exit(struct zlib_ctx *ctx) +{ + struct z_stream_s *stream = &ctx->comp_stream; + + if (stream->workspace) { + zlib_deflateEnd(stream); + vfree(stream->workspace); + stream->workspace = NULL; + } +} + +static void zlib_decomp_exit(struct zlib_ctx *ctx) +{ + struct z_stream_s *stream = &ctx->decomp_stream; + + if (stream->workspace) { + zlib_inflateEnd(stream); + kfree(stream->workspace); + stream->workspace = NULL; + } +} + +static int zlib_init(struct crypto_tfm *tfm) +{ + return 0; +} + +static void zlib_exit(struct crypto_tfm *tfm) +{ + struct zlib_ctx *ctx = crypto_tfm_ctx(tfm); + + zlib_comp_exit(ctx); + zlib_decomp_exit(ctx); +} + + +static int zlib_compress_setup(struct crypto_pcomp *tfm, void *params, + unsigned int len) +{ + struct zlib_ctx *ctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &ctx->comp_stream; + struct nlattr *tb[ZLIB_COMP_MAX + 1]; + size_t workspacesize; + int ret; + + ret = nla_parse(tb, ZLIB_COMP_MAX, params, len, NULL); + if (ret) + return ret; + + zlib_comp_exit(ctx); + + workspacesize = zlib_deflate_workspacesize(); + stream->workspace = vmalloc(workspacesize); + if (!stream->workspace) + return -ENOMEM; + + memset(stream->workspace, 0, workspacesize); + ret = zlib_deflateInit2(stream, + tb[ZLIB_COMP_LEVEL] + ? nla_get_u32(tb[ZLIB_COMP_LEVEL]) + : Z_DEFAULT_COMPRESSION, + tb[ZLIB_COMP_METHOD] + ? nla_get_u32(tb[ZLIB_COMP_METHOD]) + : Z_DEFLATED, + tb[ZLIB_COMP_WINDOWBITS] + ? nla_get_u32(tb[ZLIB_COMP_WINDOWBITS]) + : MAX_WBITS, + tb[ZLIB_COMP_MEMLEVEL] + ? nla_get_u32(tb[ZLIB_COMP_MEMLEVEL]) + : DEF_MEM_LEVEL, + tb[ZLIB_COMP_STRATEGY] + ? nla_get_u32(tb[ZLIB_COMP_STRATEGY]) + : Z_DEFAULT_STRATEGY); + if (ret != Z_OK) { + vfree(stream->workspace); + stream->workspace = NULL; + return -EINVAL; + } + + return 0; +} + +static int zlib_compress_init(struct crypto_pcomp *tfm) +{ + int ret; + struct zlib_ctx *dctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &dctx->comp_stream; + + ret = zlib_deflateReset(stream); + if (ret != Z_OK) + return -EINVAL; + + return 0; +} + +static int zlib_compress_update(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + int ret; + struct zlib_ctx *dctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &dctx->comp_stream; + + pr_debug("avail_in %u, avail_out %u\n", req->avail_in, req->avail_out); + stream->next_in = req->next_in; + stream->avail_in = req->avail_in; + stream->next_out = req->next_out; + stream->avail_out = req->avail_out; + + ret = zlib_deflate(stream, Z_NO_FLUSH); + switch (ret) { + case Z_OK: + break; + + case Z_BUF_ERROR: + pr_debug("zlib_deflate could not make progress\n"); + return -EAGAIN; + + default: + pr_debug("zlib_deflate failed %d\n", ret); + return -EINVAL; + } + + pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n", + stream->avail_in, stream->avail_out, + req->avail_in - stream->avail_in, + req->avail_out - stream->avail_out); + req->next_in = stream->next_in; + req->avail_in = stream->avail_in; + req->next_out = stream->next_out; + req->avail_out = stream->avail_out; + return 0; +} + +static int zlib_compress_final(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + int ret; + struct zlib_ctx *dctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &dctx->comp_stream; + + pr_debug("avail_in %u, avail_out %u\n", req->avail_in, req->avail_out); + stream->next_in = req->next_in; + stream->avail_in = req->avail_in; + stream->next_out = req->next_out; + stream->avail_out = req->avail_out; + + ret = zlib_deflate(stream, Z_FINISH); + if (ret != Z_STREAM_END) { + pr_debug("zlib_deflate failed %d\n", ret); + return -EINVAL; + } + + pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n", + stream->avail_in, stream->avail_out, + req->avail_in - stream->avail_in, + req->avail_out - stream->avail_out); + req->next_in = stream->next_in; + req->avail_in = stream->avail_in; + req->next_out = stream->next_out; + req->avail_out = stream->avail_out; + return 0; +} + + +static int zlib_decompress_setup(struct crypto_pcomp *tfm, void *params, + unsigned int len) +{ + struct zlib_ctx *ctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &ctx->decomp_stream; + struct nlattr *tb[ZLIB_DECOMP_MAX + 1]; + int ret = 0; + + ret = nla_parse(tb, ZLIB_DECOMP_MAX, params, len, NULL); + if (ret) + return ret; + + zlib_decomp_exit(ctx); + + ctx->decomp_windowBits = tb[ZLIB_DECOMP_WINDOWBITS] + ? nla_get_u32(tb[ZLIB_DECOMP_WINDOWBITS]) + : DEF_WBITS; + + stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL); + if (!stream->workspace) + return -ENOMEM; + + ret = zlib_inflateInit2(stream, ctx->decomp_windowBits); + if (ret != Z_OK) { + kfree(stream->workspace); + stream->workspace = NULL; + return -EINVAL; + } + + return 0; +} + +static int zlib_decompress_init(struct crypto_pcomp *tfm) +{ + int ret; + struct zlib_ctx *dctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &dctx->decomp_stream; + + ret = zlib_inflateReset(stream); + if (ret != Z_OK) + return -EINVAL; + + return 0; +} + +static int zlib_decompress_update(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + int ret; + struct zlib_ctx *dctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &dctx->decomp_stream; + + pr_debug("avail_in %u, avail_out %u\n", req->avail_in, req->avail_out); + stream->next_in = req->next_in; + stream->avail_in = req->avail_in; + stream->next_out = req->next_out; + stream->avail_out = req->avail_out; + + ret = zlib_inflate(stream, Z_SYNC_FLUSH); + switch (ret) { + case Z_OK: + case Z_STREAM_END: + break; + + case Z_BUF_ERROR: + pr_debug("zlib_inflate could not make progress\n"); + return -EAGAIN; + + default: + pr_debug("zlib_inflate failed %d\n", ret); + return -EINVAL; + } + + pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n", + stream->avail_in, stream->avail_out, + req->avail_in - stream->avail_in, + req->avail_out - stream->avail_out); + req->next_in = stream->next_in; + req->avail_in = stream->avail_in; + req->next_out = stream->next_out; + req->avail_out = stream->avail_out; + return 0; +} + +static int zlib_decompress_final(struct crypto_pcomp *tfm, + struct comp_request *req) +{ + int ret; + struct zlib_ctx *dctx = crypto_tfm_ctx(crypto_pcomp_tfm(tfm)); + struct z_stream_s *stream = &dctx->decomp_stream; + + pr_debug("avail_in %u, avail_out %u\n", req->avail_in, req->avail_out); + stream->next_in = req->next_in; + stream->avail_in = req->avail_in; + stream->next_out = req->next_out; + stream->avail_out = req->avail_out; + + if (dctx->decomp_windowBits < 0) { + ret = zlib_inflate(stream, Z_SYNC_FLUSH); + /* + * Work around a bug in zlib, which sometimes wants to taste an + * extra byte when being used in the (undocumented) raw deflate + * mode. (From USAGI). + */ + if (ret == Z_OK && !stream->avail_in && stream->avail_out) { + const void *saved_next_in = stream->next_in; + u8 zerostuff = 0; + + stream->next_in = &zerostuff; + stream->avail_in = 1; + ret = zlib_inflate(stream, Z_FINISH); + stream->next_in = saved_next_in; + stream->avail_in = 0; + } + } else + ret = zlib_inflate(stream, Z_FINISH); + if (ret != Z_STREAM_END) { + pr_debug("zlib_inflate failed %d\n", ret); + return -EINVAL; + } + + pr_debug("avail_in %u, avail_out %u (consumed %u, produced %u)\n", + stream->avail_in, stream->avail_out, + req->avail_in - stream->avail_in, + req->avail_out - stream->avail_out); + req->next_in = stream->next_in; + req->avail_in = stream->avail_in; + req->next_out = stream->next_out; + req->avail_out = stream->avail_out; + return 0; +} + + +static struct pcomp_alg zlib_alg = { + .compress_setup = zlib_compress_setup, + .compress_init = zlib_compress_init, + .compress_update = zlib_compress_update, + .compress_final = zlib_compress_final, + .decompress_setup = zlib_decompress_setup, + .decompress_init = zlib_decompress_init, + .decompress_update = zlib_decompress_update, + .decompress_final = zlib_decompress_final, + + .base = { + .cra_name = "zlib", + .cra_flags = CRYPTO_ALG_TYPE_PCOMPRESS, + .cra_ctxsize = sizeof(struct zlib_ctx), + .cra_module = THIS_MODULE, + .cra_init = zlib_init, + .cra_exit = zlib_exit, + } +}; + +static int __init zlib_mod_init(void) +{ + return crypto_register_pcomp(&zlib_alg); +} + +static void __exit zlib_mod_fini(void) +{ + crypto_unregister_pcomp(&zlib_alg); +} + +module_init(zlib_mod_init); +module_exit(zlib_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Zlib Compression Algorithm"); +MODULE_AUTHOR("Sony Corporation"); diff --git a/include/crypto/compress.h b/include/crypto/compress.h index b7d228708d6b..86163ef24219 100644 --- a/include/crypto/compress.h +++ b/include/crypto/compress.h @@ -30,6 +30,26 @@ struct comp_request { unsigned int avail_out; /* bytes available at next_out */ }; +enum zlib_comp_params { + ZLIB_COMP_LEVEL = 1, /* e.g. Z_DEFAULT_COMPRESSION */ + ZLIB_COMP_METHOD, /* e.g. Z_DEFLATED */ + ZLIB_COMP_WINDOWBITS, /* e.g. MAX_WBITS */ + ZLIB_COMP_MEMLEVEL, /* e.g. DEF_MEM_LEVEL */ + ZLIB_COMP_STRATEGY, /* e.g. Z_DEFAULT_STRATEGY */ + __ZLIB_COMP_MAX, +}; + +#define ZLIB_COMP_MAX (__ZLIB_COMP_MAX - 1) + + +enum zlib_decomp_params { + ZLIB_DECOMP_WINDOWBITS = 1, /* e.g. DEF_WBITS */ + __ZLIB_DECOMP_MAX, +}; + +#define ZLIB_DECOMP_MAX (__ZLIB_DECOMP_MAX - 1) + + struct crypto_pcomp { struct crypto_tfm base; }; -- cgit v1.2.3 From 0c01aed50d4844f54f59e875e05d211e80874464 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 Mar 2009 15:42:15 +0800 Subject: crypto: testmgr - add zlib test Signed-off-by: Geert Uytterhoeven Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 + crypto/tcrypt.c | 6 ++- crypto/testmgr.c | 15 ++++++ crypto/testmgr.h | 137 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 158 insertions(+), 1 deletion(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index be5d3128f8a8..74d0e622a515 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -92,6 +92,7 @@ config CRYPTO_MANAGER2 select CRYPTO_AEAD2 select CRYPTO_HASH2 select CRYPTO_BLKCIPHER2 + select CRYPTO_PCOMP config CRYPTO_GF128MUL tristate "GF(2^128) multiplication functions (EXPERIMENTAL)" diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 28a45a1e6f42..c3c9124209a1 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -53,7 +53,7 @@ static char *check[] = { "cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt", "camellia", "seed", "salsa20", "rmd128", "rmd160", "rmd256", "rmd320", - "lzo", "cts", NULL + "lzo", "cts", "zlib", NULL }; static int test_cipher_jiffies(struct blkcipher_desc *desc, int enc, @@ -661,6 +661,10 @@ static void do_test(int m) tcrypt_test("ecb(seed)"); break; + case 44: + tcrypt_test("zlib"); + break; + case 100: tcrypt_test("hmac(md5)"); break; diff --git a/crypto/testmgr.c b/crypto/testmgr.c index e750357b898f..b50c3c6b17a2 100644 --- a/crypto/testmgr.c +++ b/crypto/testmgr.c @@ -2018,6 +2018,21 @@ static const struct alg_test_desc alg_test_descs[] = { } } } + }, { + .alg = "zlib", + .test = alg_test_pcomp, + .suite = { + .pcomp = { + .comp = { + .vecs = zlib_comp_tv_template, + .count = ZLIB_COMP_TEST_VECTORS + }, + .decomp = { + .vecs = zlib_decomp_tv_template, + .count = ZLIB_DECOMP_TEST_VECTORS + } + } + } } }; diff --git a/crypto/testmgr.h b/crypto/testmgr.h index c517e43cfc88..526f00a9c72f 100644 --- a/crypto/testmgr.h +++ b/crypto/testmgr.h @@ -15,6 +15,9 @@ #ifndef _CRYPTO_TESTMGR_H #define _CRYPTO_TESTMGR_H +#include +#include + #include #define MAX_DIGEST_SIZE 64 @@ -8361,6 +8364,7 @@ struct pcomp_testvec { * Deflate test vectors (null-terminated strings). * Params: winbits=-11, Z_DEFAULT_COMPRESSION, MAX_MEM_LEVEL. */ + #define DEFLATE_COMP_TEST_VECTORS 2 #define DEFLATE_DECOMP_TEST_VECTORS 2 @@ -8436,6 +8440,139 @@ static struct comp_testvec deflate_decomp_tv_template[] = { }, }; +#define ZLIB_COMP_TEST_VECTORS 2 +#define ZLIB_DECOMP_TEST_VECTORS 2 + +static const struct { + struct nlattr nla; + int val; +} deflate_comp_params[] = { + { + .nla = { + .nla_len = NLA_HDRLEN + sizeof(int), + .nla_type = ZLIB_COMP_LEVEL, + }, + .val = Z_DEFAULT_COMPRESSION, + }, { + .nla = { + .nla_len = NLA_HDRLEN + sizeof(int), + .nla_type = ZLIB_COMP_METHOD, + }, + .val = Z_DEFLATED, + }, { + .nla = { + .nla_len = NLA_HDRLEN + sizeof(int), + .nla_type = ZLIB_COMP_WINDOWBITS, + }, + .val = -11, + }, { + .nla = { + .nla_len = NLA_HDRLEN + sizeof(int), + .nla_type = ZLIB_COMP_MEMLEVEL, + }, + .val = MAX_MEM_LEVEL, + }, { + .nla = { + .nla_len = NLA_HDRLEN + sizeof(int), + .nla_type = ZLIB_COMP_STRATEGY, + }, + .val = Z_DEFAULT_STRATEGY, + } +}; + +static const struct { + struct nlattr nla; + int val; +} deflate_decomp_params[] = { + { + .nla = { + .nla_len = NLA_HDRLEN + sizeof(int), + .nla_type = ZLIB_DECOMP_WINDOWBITS, + }, + .val = -11, + } +}; + +static struct pcomp_testvec zlib_comp_tv_template[] = { + { + .params = &deflate_comp_params, + .paramsize = sizeof(deflate_comp_params), + .inlen = 70, + .outlen = 38, + .input = "Join us now and share the software " + "Join us now and share the software ", + .output = "\xf3\xca\xcf\xcc\x53\x28\x2d\x56" + "\xc8\xcb\x2f\x57\x48\xcc\x4b\x51" + "\x28\xce\x48\x2c\x4a\x55\x28\xc9" + "\x48\x55\x28\xce\x4f\x2b\x29\x07" + "\x71\xbc\x08\x2b\x01\x00", + }, { + .params = &deflate_comp_params, + .paramsize = sizeof(deflate_comp_params), + .inlen = 191, + .outlen = 122, + .input = "This document describes a compression method based on the DEFLATE" + "compression algorithm. This document defines the application of " + "the DEFLATE algorithm to the IP Payload Compression Protocol.", + .output = "\x5d\x8d\x31\x0e\xc2\x30\x10\x04" + "\xbf\xb2\x2f\xc8\x1f\x10\x04\x09" + "\x89\xc2\x85\x3f\x70\xb1\x2f\xf8" + "\x24\xdb\x67\xd9\x47\xc1\xef\x49" + "\x68\x12\x51\xae\x76\x67\xd6\x27" + "\x19\x88\x1a\xde\x85\xab\x21\xf2" + "\x08\x5d\x16\x1e\x20\x04\x2d\xad" + "\xf3\x18\xa2\x15\x85\x2d\x69\xc4" + "\x42\x83\x23\xb6\x6c\x89\x71\x9b" + "\xef\xcf\x8b\x9f\xcf\x33\xca\x2f" + "\xed\x62\xa9\x4c\x80\xff\x13\xaf" + "\x52\x37\xed\x0e\x52\x6b\x59\x02" + "\xd9\x4e\xe8\x7a\x76\x1d\x02\x98" + "\xfe\x8a\x87\x83\xa3\x4f\x56\x8a" + "\xb8\x9e\x8e\x5c\x57\xd3\xa0\x79" + "\xfa\x02", + }, +}; + +static struct pcomp_testvec zlib_decomp_tv_template[] = { + { + .params = &deflate_decomp_params, + .paramsize = sizeof(deflate_decomp_params), + .inlen = 122, + .outlen = 191, + .input = "\x5d\x8d\x31\x0e\xc2\x30\x10\x04" + "\xbf\xb2\x2f\xc8\x1f\x10\x04\x09" + "\x89\xc2\x85\x3f\x70\xb1\x2f\xf8" + "\x24\xdb\x67\xd9\x47\xc1\xef\x49" + "\x68\x12\x51\xae\x76\x67\xd6\x27" + "\x19\x88\x1a\xde\x85\xab\x21\xf2" + "\x08\x5d\x16\x1e\x20\x04\x2d\xad" + "\xf3\x18\xa2\x15\x85\x2d\x69\xc4" + "\x42\x83\x23\xb6\x6c\x89\x71\x9b" + "\xef\xcf\x8b\x9f\xcf\x33\xca\x2f" + "\xed\x62\xa9\x4c\x80\xff\x13\xaf" + "\x52\x37\xed\x0e\x52\x6b\x59\x02" + "\xd9\x4e\xe8\x7a\x76\x1d\x02\x98" + "\xfe\x8a\x87\x83\xa3\x4f\x56\x8a" + "\xb8\x9e\x8e\x5c\x57\xd3\xa0\x79" + "\xfa\x02", + .output = "This document describes a compression method based on the DEFLATE" + "compression algorithm. This document defines the application of " + "the DEFLATE algorithm to the IP Payload Compression Protocol.", + }, { + .params = &deflate_decomp_params, + .paramsize = sizeof(deflate_decomp_params), + .inlen = 38, + .outlen = 70, + .input = "\xf3\xca\xcf\xcc\x53\x28\x2d\x56" + "\xc8\xcb\x2f\x57\x48\xcc\x4b\x51" + "\x28\xce\x48\x2c\x4a\x55\x28\xc9" + "\x48\x55\x28\xce\x4f\x2b\x29\x07" + "\x71\xbc\x08\x2b\x01\x00", + .output = "Join us now and share the software " + "Join us now and share the software ", + }, +}; + /* * LZO test vectors (null-terminated strings). */ -- cgit v1.2.3 From 5fd3a17ed456637a224cf4ca82b9ad9d005bc8d4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 4 Mar 2009 00:57:25 -0700 Subject: md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [] ? debug_mutex_add_waiter+0x1d/0x58 [] __mutex_lock_common+0x1d9/0x338 [] ? __mutex_lock_common+0x1d9/0x338 [] mutex_lock_interruptible_nested+0x33/0x3a [] ? mddev_lock+0x14/0x16 [] mddev_lock+0x14/0x16 [] md_attr_show+0x2a/0x49 [] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [] schedule_timeout+0x1b/0x95 [] ? schedule_timeout+0x1b/0x95 [] ? wait_for_common+0x34/0xdc [] ? trace_hardirqs_on_caller+0x18/0x145 [] ? trace_hardirqs_on+0xb/0xd [] wait_for_common+0xa0/0xdc [] ? default_wake_function+0x0/0x12 [] wait_for_completion+0x17/0x19 [] sysfs_addrm_finish+0x19f/0x1d1 [] sysfs_hash_and_remove+0x42/0x55 [] sysfs_remove_group+0x57/0x86 [] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: Reported-by: Jacek Danecki Signed-off-by: Dan Williams --- drivers/md/md.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 03b4cd0a6344..a307f87eb90e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -214,12 +214,7 @@ static inline mddev_t *mddev_get(mddev_t *mddev) return mddev; } -static void mddev_delayed_delete(struct work_struct *ws) -{ - mddev_t *mddev = container_of(ws, mddev_t, del_work); - kobject_del(&mddev->kobj); - kobject_put(&mddev->kobj); -} +static void mddev_delayed_delete(struct work_struct *ws); static void mddev_put(mddev_t *mddev) { @@ -3542,6 +3537,21 @@ static struct kobj_type md_ktype = { int mdp_major = 0; +static void mddev_delayed_delete(struct work_struct *ws) +{ + mddev_t *mddev = container_of(ws, mddev_t, del_work); + + if (mddev->private == &md_redundancy_group) { + sysfs_remove_group(&mddev->kobj, &md_redundancy_group); + if (mddev->sysfs_action) + sysfs_put(mddev->sysfs_action); + mddev->sysfs_action = NULL; + mddev->private = NULL; + } + kobject_del(&mddev->kobj); + kobject_put(&mddev->kobj); +} + static int md_alloc(dev_t dev, char *name) { static DEFINE_MUTEX(disks_mutex); @@ -4033,13 +4043,9 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) mddev->queue->merge_bvec_fn = NULL; mddev->queue->unplug_fn = NULL; mddev->queue->backing_dev_info.congested_fn = NULL; - if (mddev->pers->sync_request) { - sysfs_remove_group(&mddev->kobj, &md_redundancy_group); - if (mddev->sysfs_action) - sysfs_put(mddev->sysfs_action); - mddev->sysfs_action = NULL; - } module_put(mddev->pers->owner); + if (mddev->pers->sync_request) + mddev->private = &md_redundancy_group; mddev->pers = NULL; /* tell userspace to handle 'inactive' */ sysfs_notify_dirent(mddev->sysfs_state); -- cgit v1.2.3 From 79d7d5333b598e9a559bf27833f0ad2b8bf6ad2c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Mar 2009 09:03:50 +0100 Subject: ALSA: hda - Fix HP dv6736 mic input Fix the mic input of HP dv6736 with Conexant 5051 codec chip. This laptop seems have no mic-switching per jack connection. A new model hp-dv6736 is introduced to match with the h/w implementation. Reference: Novell bnc#480753 https://bugzilla.novell.com/show_bug.cgi?id=480753 Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_conexant.c | 63 +++++++++++++++++++++++++--- 2 files changed, 59 insertions(+), 5 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index a448bbefd488..80b796e4a80e 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -262,6 +262,7 @@ Conexant 5051 ============= laptop Basic Laptop config (default) hp HP Spartan laptop + hp-dv6736 HP dv6736 lenovo-x200 Lenovo X200 laptop STAC9200 diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index b8de73ecfdeb..1938e92e1f03 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -72,6 +72,7 @@ struct conexant_spec { */ unsigned int cur_eapd; unsigned int hp_present; + unsigned int no_auto_mic; unsigned int need_dac_fix; /* capture */ @@ -1665,8 +1666,11 @@ static int cxt5051_hp_master_sw_put(struct snd_kcontrol *kcontrol, /* toggle input of built-in and mic jack appropriately */ static void cxt5051_portb_automic(struct hda_codec *codec) { + struct conexant_spec *spec = codec->spec; unsigned int present; + if (spec->no_auto_mic) + return; present = snd_hda_codec_read(codec, 0x17, 0, AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE; @@ -1682,6 +1686,8 @@ static void cxt5051_portc_automic(struct hda_codec *codec) unsigned int present; hda_nid_t new_adc; + if (spec->no_auto_mic) + return; present = snd_hda_codec_read(codec, 0x18, 0, AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE; @@ -1768,6 +1774,22 @@ static struct snd_kcontrol_new cxt5051_hp_mixers[] = { {} }; +static struct snd_kcontrol_new cxt5051_hp_dv6736_mixers[] = { + HDA_CODEC_VOLUME("Mic Volume", 0x14, 0x00, HDA_INPUT), + HDA_CODEC_MUTE("Mic Switch", 0x14, 0x00, HDA_INPUT), + HDA_CODEC_VOLUME("Master Playback Volume", 0x10, 0x00, HDA_OUTPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .info = cxt_eapd_info, + .get = cxt_eapd_get, + .put = cxt5051_hp_master_sw_put, + .private_value = 0x1a, + }, + + {} +}; + static struct hda_verb cxt5051_init_verbs[] = { /* Line in, Mic */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03}, @@ -1798,6 +1820,32 @@ static struct hda_verb cxt5051_init_verbs[] = { { } /* end */ }; +static struct hda_verb cxt5051_hp_dv6736_init_verbs[] = { + /* Line in, Mic */ + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0}, + {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0}, + /* SPK */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* HP, Amp */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x16, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* DAC1 */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Record selector: Int mic */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1) | 0x44}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x1}, + /* SPDIF route: PCM */ + {0x1c, AC_VERB_SET_CONNECT_SEL, 0x0}, + /* EAPD */ + {0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */ + {0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT}, + {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTB_EVENT}, + { } /* end */ +}; + static struct hda_verb cxt5051_lenovo_x200_init_verbs[] = { /* Line in, Mic */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03}, @@ -1849,6 +1897,7 @@ static int cxt5051_init(struct hda_codec *codec) enum { CXT5051_LAPTOP, /* Laptops w/ EAPD support */ CXT5051_HP, /* no docking */ + CXT5051_HP_DV6736, /* HP without mic switch */ CXT5051_LENOVO_X200, /* Lenovo X200 laptop */ CXT5051_MODELS }; @@ -1856,10 +1905,12 @@ enum { static const char *cxt5051_models[CXT5051_MODELS] = { [CXT5051_LAPTOP] = "laptop", [CXT5051_HP] = "hp", + [CXT5051_HP_DV6736] = "hp-dv6736", [CXT5051_LENOVO_X200] = "lenovo-x200", }; static struct snd_pci_quirk cxt5051_cfg_tbl[] = { + SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736), SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5051_LAPTOP), SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP), @@ -1896,20 +1947,22 @@ static int patch_cxt5051(struct hda_codec *codec) spec->cur_adc = 0; spec->cur_adc_idx = 0; + codec->patch_ops.unsol_event = cxt5051_hp_unsol_event; + board_config = snd_hda_check_board_config(codec, CXT5051_MODELS, cxt5051_models, cxt5051_cfg_tbl); switch (board_config) { case CXT5051_HP: - codec->patch_ops.unsol_event = cxt5051_hp_unsol_event; spec->mixers[0] = cxt5051_hp_mixers; break; + case CXT5051_HP_DV6736: + spec->init_verbs[0] = cxt5051_hp_dv6736_init_verbs; + spec->mixers[0] = cxt5051_hp_dv6736_mixers; + spec->no_auto_mic = 1; + break; case CXT5051_LENOVO_X200: spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs; - /* fallthru */ - default: - case CXT5051_LAPTOP: - codec->patch_ops.unsol_event = cxt5051_hp_unsol_event; break; } -- cgit v1.2.3 From c21986a76220919bb06e4c04a89a8a62aeac107e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 4 Mar 2009 00:18:11 -0800 Subject: jsflash: stop defining MAJOR_NR Ever since early 2.5 kernels block drivers don't need to define MAJOR_NR anymore, so use the JSFD_MAJOR defined directly and kill it. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/sbus/char/jsflash.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index a9a9893a5f95..e6d1fc8c54f1 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -38,9 +38,6 @@ #include #include #include - -#define MAJOR_NR JSFD_MAJOR - #include #include #include -- cgit v1.2.3 From f4c13638185c91a269c63fcfb980d89180cf43a1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Mar 2009 00:19:28 -0800 Subject: sparc64: wait_event_interruptible_timeout may return -ERESTARTSYS wait_event_interruptible_timeout may return -ERESTARTSYS. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index f08e169ba1b5..7e30e5f6e032 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -129,7 +129,7 @@ static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) bp->waiting = 1; add_wait_queue(&bp->wq, &wait); while (limit-- > 0) { - unsigned long val; + long val; val = wait_event_interruptible_timeout( bp->wq, -- cgit v1.2.3 From 0bf3d933085509916335480121761a1b225e6c23 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 5 Mar 2009 16:44:53 +0800 Subject: Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch Free spinlock before call IPI handlers. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Header from folded patch 'blackfin_arch__fix_bug_-_kgdb_fails_to_continue_after_setting_breakpoint_on_bf561-ezkit_kernel_with_smp_patch-1': Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch Don't test l1 code in SMP kernel. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/kgdb_test.c | 9 +++++++-- arch/blackfin/mach-common/smp.c | 6 +++++- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c index 3dba9c17304a..dbcf3e45cb0b 100644 --- a/arch/blackfin/kernel/kgdb_test.c +++ b/arch/blackfin/kernel/kgdb_test.c @@ -20,6 +20,7 @@ static char cmdline[256]; static unsigned long len; +#ifndef CONFIG_SMP static int num1 __attribute__((l1_data)); void kgdb_l1_test(void) __attribute__((l1_text)); @@ -32,6 +33,8 @@ void kgdb_l1_test(void) printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); return ; } +#endif + #if L2_LENGTH static int num2 __attribute__((l2)); @@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z) static int test_proc_output(char *buf) { kgdb_test("hello world!", 12, 0x55, 0x10); +#ifndef CONFIG_SMP kgdb_l1_test(); - #if L2_LENGTH +#endif +#if L2_LENGTH kgdb_l2_test(); - #endif +#endif return 0; } diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 77c992847094..93eab6146079 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance) kfree(msg); break; case BFIN_IPI_CALL_FUNC: + spin_unlock(&msg_queue->lock); ipi_call_function(cpu, msg); + spin_lock(&msg_queue->lock); break; case BFIN_IPI_CPU_STOP: + spin_unlock(&msg_queue->lock); ipi_cpu_stop(cpu); + spin_lock(&msg_queue->lock); kfree(msg); break; default: @@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) smp_flush_data.start = start; smp_flush_data.end = end; - if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1)) + if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0)) printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n"); } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); -- cgit v1.2.3 From 199862892e83d04a294eebad45adc40c658b8630 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 5 Mar 2009 16:45:55 +0800 Subject: Blackfin arch: PM_BFIN_WAKE_GP: update help Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8f1f97d56e1e..be6097163b07 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1168,6 +1168,12 @@ config PM_BFIN_WAKE_GP default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) + (all processors, except ADSP-BF549). This option sets + the general-purpose wake-up enable (GPWE) control bit to enable + wake-up upon detection of an active low signal on the /GPW (PH7) pin. + On ADSP-BF549 this option enables the the same functionality on the + /MRXON pin also PH7. + endmenu menu "CPU Frequency scaling" -- cgit v1.2.3 From ff19fed4fe54f2f1dd439ac02969333ea9a9b4ff Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Mar 2009 17:35:51 +0800 Subject: Blackfin arch: Fix BUG - kernel fails to build in pm.c when allow wakeup fromi standby by GPIO This feature is not available on BF54x. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index be6097163b07..0c1f86e3e44a 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1129,6 +1129,7 @@ endchoice config PM_WAKEUP_BY_GPIO bool "Allow Wakeup from Standby by GPIO" + depends on PM && !BF54x config PM_WAKEUP_GPIO_NUMBER int "GPIO number" -- cgit v1.2.3 From c18e99cfba746ab0ad8d45e1f351ed990947c58c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Mar 2009 17:36:49 +0800 Subject: Blackfin arch: update anomaly sheets to match latest public info Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/include/mach/anomaly.h | 13 +++++++++++-- arch/blackfin/mach-bf527/include/mach/anomaly.h | 3 ++- arch/blackfin/mach-bf533/include/mach/anomaly.h | 4 ++-- arch/blackfin/mach-bf537/include/mach/anomaly.h | 4 ++-- arch/blackfin/mach-bf538/include/mach/anomaly.h | 3 ++- arch/blackfin/mach-bf548/include/mach/anomaly.h | 21 +++++++++++++++++---- arch/blackfin/mach-bf561/include/mach/anomaly.h | 4 ++-- 7 files changed, 38 insertions(+), 14 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 6e1670072829..143a29dfe870 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf518/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - ???? + * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -19,6 +19,8 @@ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ @@ -53,6 +55,12 @@ #define ANOMALY_05000443 (1) /* Incorrect L1 Instruction Bank B Memory Map Location */ #define ANOMALY_05000444 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (1) +/* PWM_TRIPB Signal Not Available on PG10 */ +#define ANOMALY_05000453 (1) +/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ +#define ANOMALY_05000455 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -67,6 +75,7 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index fdc87839af60..4ffccb6de52d 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf527/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -169,6 +169,7 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 657dd1820a93..9e838f851720 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf533/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -160,7 +160,7 @@ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index fe1ae4c75cd6..438b43ffd41e 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -110,7 +110,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 3) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 56ea454709ca..f4ece1cfca43 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf538/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -120,6 +120,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index d9d10a73c1dc..882e40ccf0d1 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf548/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -91,8 +91,6 @@ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2) /* USB DP/DM Data Pins May Lose State When Entering Hibernate */ #define ANOMALY_05000372 (__SILICON_REVISION__ < 1) -/* Mobile DDR Operation Not Functional */ -#define ANOMALY_05000377 (1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2) /* 16-Bit NAND FLASH Boot Mode Is Not Functional */ @@ -157,8 +155,22 @@ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2) /* Software System Reset Corrupts PLL_LOCKCNT Register */ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) +/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ +#define ANOMALY_05000431 (__SILICON_REVISION__ < 3) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */ +#define ANOMALY_05000446 (1) +/* UART IrDA Receiver Fails on Extended Bit Pulses */ +#define ANOMALY_05000447 (1) +/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */ +#define ANOMALY_05000448 (__SILICON_REVISION__ == 1) +/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ +#define ANOMALY_05000449 (__SILICON_REVISION__ == 1) +/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000450 (1 /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -172,6 +184,7 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000278 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 24d3a2264e44..d78bc6b49e61 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf561/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -224,7 +224,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) -- cgit v1.2.3 From bd6afe3f34d41ed81e0c62a5a2181bb7bd51aebf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Mar 2009 11:30:25 +0100 Subject: ALSA: hda - Fix conflict of mixer controls on Sony VAIO VGN-AR71S The recent update enabled the model=sony-assamd for all ALC262 with PCI SSID 104d:90xx. But this includes the VAIO VGN-AR* that has the primary codec of STAC92xx and the secondary ALC262 as a slave digital-only codec. For this device, the model=auto must be chosen to work properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c60c86acd9ba..8c02f789e4fc 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10825,6 +10825,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x1f00, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x8203, "Sony UX-90", ALC262_HIPPO), SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), + SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", -- cgit v1.2.3 From ec67624d33d5639bcc6ee6918cb1fc0bd1bac3a8 Mon Sep 17 00:00:00 2001 From: "Lopez Cruz, Misael" Date: Tue, 3 Mar 2009 15:25:04 -0600 Subject: ASoC: Add GPIO support for jack reporting interface Add GPIO support to jack reporting framework in ASoC using gpiolib calls. The gpio support exports two new functions: snd_soc_jack_add_gpios and snd_soc_jack_free_gpios. Client drivers using gpio feature must pass an array of jack_gpio pins belonging to a specific jack to the snd_soc_jack_add_gpios function. The framework will request the gpios, set the data direction and request irq. The framework will update power status of related jack_pins when an event on the gpio pins comes according to the reporting bits defined for each gpio. All gpio resources allocated when adding jack_gpio pins can be released using snd_soc_jack_free_gpios function. Signed-off-by: Misael Lopez Cruz Signed-off-by: Mark Brown --- include/sound/soc.h | 32 +++++++++++++ sound/soc/soc-jack.c | 129 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index 0e7735264169..a40bc6f316fc 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -168,6 +170,9 @@ struct soc_enum; struct snd_soc_ac97_ops; struct snd_soc_jack; struct snd_soc_jack_pin; +#ifdef CONFIG_GPIOLIB +struct snd_soc_jack_gpio; +#endif typedef int (*hw_write_t)(void *,const char* ,int); typedef int (*hw_read_t)(void *,char* ,int); @@ -194,6 +199,12 @@ int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type, void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask); int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, struct snd_soc_jack_pin *pins); +#ifdef CONFIG_GPIOLIB +int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, + struct snd_soc_jack_gpio *gpios); +void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count, + struct snd_soc_jack_gpio *gpios); +#endif /* codec IO */ #define snd_soc_read(codec, reg) codec->read(codec, reg) @@ -264,6 +275,27 @@ struct snd_soc_jack_pin { bool invert; }; +/** + * struct snd_soc_jack_gpio - Describes a gpio pin for jack detection + * + * @gpio: gpio number + * @name: gpio name + * @report: value to report when jack detected + * @invert: report presence in low state + * @debouce_time: debouce time in ms + */ +#ifdef CONFIG_GPIOLIB +struct snd_soc_jack_gpio { + unsigned int gpio; + const char *name; + int report; + int invert; + int debounce_time; + struct snd_soc_jack *jack; + struct work_struct work; +}; +#endif + struct snd_soc_jack { struct snd_jack *jack; struct snd_soc_card *card; diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index ab64a30bedde..bdf2484c2220 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -14,6 +14,10 @@ #include #include #include +#include +#include +#include +#include /** * snd_soc_jack_new - Create a new jack @@ -136,3 +140,128 @@ int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, return 0; } EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins); + +#ifdef CONFIG_GPIOLIB +/* gpio detect */ +void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio) +{ + struct snd_soc_jack *jack = gpio->jack; + int enable; + int report; + + if (gpio->debounce_time > 0) + mdelay(gpio->debounce_time); + + enable = gpio_get_value(gpio->gpio); + if (gpio->invert) + enable = !enable; + + if (enable) + report = gpio->report; + else + report = 0; + + snd_soc_jack_report(jack, report, gpio->report); +} + +/* irq handler for gpio pin */ +static irqreturn_t gpio_handler(int irq, void *data) +{ + struct snd_soc_jack_gpio *gpio = data; + + schedule_work(&gpio->work); + + return IRQ_HANDLED; +} + +/* gpio work */ +static void gpio_work(struct work_struct *work) +{ + struct snd_soc_jack_gpio *gpio; + + gpio = container_of(work, struct snd_soc_jack_gpio, work); + snd_soc_jack_gpio_detect(gpio); +} + +/** + * snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack + * + * @jack: ASoC jack + * @count: number of pins + * @gpios: array of gpio pins + * + * This function will request gpio, set data direction and request irq + * for each gpio in the array. + */ +int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, + struct snd_soc_jack_gpio *gpios) +{ + int i, ret; + + for (i = 0; i < count; i++) { + if (!gpio_is_valid(gpios[i].gpio)) { + printk(KERN_ERR "Invalid gpio %d\n", + gpios[i].gpio); + ret = -EINVAL; + goto undo; + } + if (!gpios[i].name) { + printk(KERN_ERR "No name for gpio %d\n", + gpios[i].gpio); + ret = -EINVAL; + goto undo; + } + + ret = gpio_request(gpios[i].gpio, gpios[i].name); + if (ret) + goto undo; + + ret = gpio_direction_input(gpios[i].gpio); + if (ret) + goto err; + + ret = request_irq(gpio_to_irq(gpios[i].gpio), + gpio_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + jack->card->dev->driver->name, + &gpios[i]); + if (ret) + goto err; + + INIT_WORK(&gpios[i].work, gpio_work); + gpios[i].jack = jack; + } + + return 0; + +err: + gpio_free(gpios[i].gpio); +undo: + snd_soc_jack_free_gpios(jack, i, gpios); + + return ret; +} +EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios); + +/** + * snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack + * + * @jack: ASoC jack + * @count: number of pins + * @gpios: array of gpio pins + * + * Release gpio and irq resources for gpio pins associated with an ASoC jack. + */ +void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count, + struct snd_soc_jack_gpio *gpios) +{ + int i; + + for (i = 0; i < count; i++) { + free_irq(gpio_to_irq(gpios[i].gpio), &gpios[i]); + gpio_free(gpios[i].gpio); + gpios[i].jack = NULL; + } +} +EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios); +#endif /* CONFIG_GPIOLIB */ -- cgit v1.2.3 From 86027ae78c9294bb450b76eec28cfb431a8fb3ee Mon Sep 17 00:00:00 2001 From: Jonas Andersson Date: Wed, 4 Mar 2009 08:24:26 +0100 Subject: ASoC: wm8510 pll settings When setting WM8510_MCLKDIV the pll was turned off. When setting pll frequency you got twice the expected freq, because the code calculated with postscaler of 8, but the hardware divide by 4. Signed-off-by: Jonas Andersson Signed-off-by: Mark Brown --- sound/soc/atmel/playpaq_wm8510.c | 24 ++++++++++++------------ sound/soc/codecs/wm8510.c | 4 ++-- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index 43dd8cee83c6..70657534e6b1 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -164,38 +164,38 @@ static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, */ switch (params_rate(params)) { case 48000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_1; + pll_out = 24576000; + mclk_div = WM8510_MCLKDIV_2; bclk = WM8510_BCLKDIV_8; break; case 44100: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_1; + pll_out = 22579200; + mclk_div = WM8510_MCLKDIV_2; bclk = WM8510_BCLKDIV_8; break; case 22050: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_2; + pll_out = 22579200; + mclk_div = WM8510_MCLKDIV_4; bclk = WM8510_BCLKDIV_8; break; case 16000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_3; + pll_out = 24576000; + mclk_div = WM8510_MCLKDIV_6; bclk = WM8510_BCLKDIV_8; break; case 11025: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_4; + pll_out = 22579200; + mclk_div = WM8510_MCLKDIV_8; bclk = WM8510_BCLKDIV_8; break; case 8000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_6; + pll_out = 24576000; + mclk_div = WM8510_MCLKDIV_12; bclk = WM8510_BCLKDIV_8; break; diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index f01078cfbd72..6d4ef71e9195 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -336,7 +336,7 @@ static int wm8510_set_dai_pll(struct snd_soc_dai *codec_dai, return 0; } - pll_factors(freq_out*8, freq_in); + pll_factors(freq_out*4, freq_in); wm8510_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n); wm8510_write(codec, WM8510_PLLK1, pll_div.k >> 18); @@ -367,7 +367,7 @@ static int wm8510_set_dai_clkdiv(struct snd_soc_dai *codec_dai, wm8510_write(codec, WM8510_GPIO, reg | div); break; case WM8510_MCLKDIV: - reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1f; + reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x11f; wm8510_write(codec, WM8510_CLOCK, reg | div); break; case WM8510_ADCCLK: -- cgit v1.2.3 From ff0c0874905fb312ca1491bbdac2653b0b48c20b Mon Sep 17 00:00:00 2001 From: Brian Maly Date: Tue, 3 Mar 2009 21:55:31 -0500 Subject: x86: fix DMI on EFI Impact: reactivate DMI quirks on EFI hardware DMI tables are loaded by EFI, so the dmi calls must happen after efi_init() and not before. Currently Apple hardware uses DMI to determine the framebuffer mappings for efifb. Without DMI working you also have no video on MacBook Pro. This patch resolves the DMI issue for EFI hardware (DMI is now properly detected at boot), and additionally efifb now loads on Apple hardware (i.e. video works). Signed-off-by: Brian Maly Acked-by: Yinghai Lu Cc: ying.huang@intel.com LKML-Reference: <49ADEDA3.1030406@redhat.com> Signed-off-by: Ingo Molnar arch/x86/kernel/setup.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- arch/x86/kernel/setup.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c461f6d69074..6a8811a69324 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -770,6 +770,9 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + if (efi_enabled) + efi_init(); + dmi_scan_machine(); dmi_check_system(bad_bios_dmi_table); @@ -789,8 +792,6 @@ void __init setup_arch(char **cmdline_p) insert_resource(&iomem_resource, &data_resource); insert_resource(&iomem_resource, &bss_resource); - if (efi_enabled) - efi_init(); #ifdef CONFIG_X86_32 if (ppro_with_ram_bug()) { -- cgit v1.2.3 From 87d99d6f7ee3ec73b2b0212427b173502ec9d6cb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 4 Mar 2009 10:07:40 -0800 Subject: ARM: OMAP: Fix compile error if pm.h is included Change the error to a warning. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/pm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 2a9c27ad4c37..37e2f0f38b46 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -108,7 +108,7 @@ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) && \ !defined(CONFIG_ARCH_OMAP24XX) -#error "Power management for this processor not implemented yet" +#warning "Power management for this processor not implemented yet" #endif #ifndef __ASSEMBLER__ -- cgit v1.2.3 From 80ea3bac3a47bc73efa334d0dd57099d0ff14216 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 4 Mar 2009 10:07:41 -0800 Subject: ARM: OMAP: sched_clock() corrected After my OMAP3 board has been running for a while, I'm seeing weird latency traces like this: sh-1574 0d.h2 153us : do_timer (tick_do_update_jiffies64) sh-1574 0d.h2 153us : update_wall_time (do_timer) sh-1574 0d.h2 153us!: omap_32k_read (update_wall_time) sh-1574 0d.h2 1883us : update_xtime_cache (update_wall_time) sh-1574 0d.h2 1883us : clocksource_get_next (update_wall_time) sh-1574 0d.h2 1883us+: _spin_lock_irqsave (clocksource_get_next) and after a while: sh-17818 0d.h3 153us : do_timer (tick_do_update_jiffies64) sh-17818 0d.h3 153us : update_wall_time (do_timer) sh-17818 0d.h3 153us!: omap_32k_read (update_wall_time) sh-17818 0d.h3 1915us : update_xtime_cache (update_wall_time) sh-17818 0d.h3 1915us+: clocksource_get_next (update_wall_time) sh-17818 0d.h3 1945us : _spin_lock_irqsave (clocksource_get_next) Turns out that sched_clock() is using cyc2ns(), which returns NTP adjusted time. The sched_clock() frequency should not be adjusted. The patch deletes omap_32k_ticks_to_nsecs() and rewrites sched_clock() to do the conversion using the constant multiplier. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0843b8882f93..6825fbb5a056 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* - * Rounds down to nearest nsec. - */ -unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k) -{ - return cyc2ns(&clocksource_32k, ticks_32k); -} - /* * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. */ unsigned long long sched_clock(void) { - return omap_32k_ticks_to_nsecs(omap_32k_read()); + unsigned long long ret; + + ret = (unsigned long long)omap_32k_read(); + ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; + return ret; } static int __init omap_init_clocksource_32k(void) -- cgit v1.2.3 From e951651657610305c9af0045fd64c6a5b0bc4b80 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 4 Mar 2009 10:07:41 -0800 Subject: ARM: OMAP: Allow I2C bus driver to be compiled as a module Fixes a linker error when OMAP I2C bus driver is compiled as a module: ERROR: "i2c_register_board_info" [arch/arm/plat-omap/i2c.ko] undefined! The I2C utility functions used for board initialization should be always built-in. Signed-off-by: Aaro Koskinen Acked-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Makefile | 3 ++- arch/arm/plat-omap/include/mach/common.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index deaff58878a2..04a100cfb8e5 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o -obj-$(CONFIG_I2C_OMAP) += i2c.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index ef70e2b0f054..e746ec7e785e 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -35,7 +35,7 @@ extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); extern void omap_serial_enable_clocks(int enable); -#ifdef CONFIG_I2C_OMAP +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len); -- cgit v1.2.3 From 8ca7fe267f58462825729443f3e3b44ef4901cf0 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 4 Mar 2009 10:07:42 -0800 Subject: ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz Changing it do 100kHz is needed to make more devices works properly. Controlling the TI DLP Pico projector[1] doesn't work properly at 400kHz, 100kHz and lower work fine. EDID readout is unaffected by this change. [1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234 Signed-off-by: Koen Kooi Acked-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 38c88fbe658d..e39cd2c46cfa 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void) #ifdef CONFIG_I2C2_OMAP_BEAGLE omap_register_i2c_bus(2, 400, NULL, 0); #endif - omap_register_i2c_bus(3, 400, NULL, 0); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } -- cgit v1.2.3 From dd39ecf522ba86c70809715af46e6557f6491131 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 4 Mar 2009 10:58:33 +0800 Subject: x86: EFI: Back efi_ioremap with init_memory_mapping instead of FIX_MAP Impact: Fix boot failure on EFI system with large runtime memory range Brian Maly reported that some EFI system with large runtime memory range can not boot. Because the FIX_MAP used to map runtime memory range is smaller than run time memory range. This patch fixes this issue by re-implement efi_ioremap() with init_memory_mapping(). Reported-and-tested-by: Brian Maly Signed-off-by: Huang Ying Cc: Brian Maly Cc: Yinghai Lu LKML-Reference: <1236135513.6204.306.camel@yhuang-dev.sh.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/efi.h | 2 -- arch/x86/include/asm/fixmap_64.h | 4 ---- arch/x86/kernel/efi.c | 7 +++++-- arch/x86/kernel/efi_64.c | 21 ++++----------------- 4 files changed, 9 insertions(+), 25 deletions(-) diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index ca5ffb2856b6..edc90f23e708 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -37,8 +37,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #else /* !CONFIG_X86_32 */ -#define MAX_EFI_IO_PAGES 100 - extern u64 efi_call0(void *fp); extern u64 efi_call1(void *fp, u64 arg1); extern u64 efi_call2(void *fp, u64 arg1, u64 arg2); diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h index 00a30ab9b1a5..8be740977db8 100644 --- a/arch/x86/include/asm/fixmap_64.h +++ b/arch/x86/include/asm/fixmap_64.h @@ -16,7 +16,6 @@ #include #include #include -#include /* * Here we define all the compile-time 'special' virtual @@ -43,9 +42,6 @@ enum fixed_addresses { FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ FIX_IO_APIC_BASE_0, FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1, - FIX_EFI_IO_MAP_LAST_PAGE, - FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE - + MAX_EFI_IO_PAGES - 1, #ifdef CONFIG_PARAVIRT FIX_PARAVIRT_BOOTMAP, #endif diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 1119d247fe11..eb1ef3b67dd5 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -467,7 +467,7 @@ void __init efi_enter_virtual_mode(void) efi_memory_desc_t *md; efi_status_t status; unsigned long size; - u64 end, systab, addr, npages; + u64 end, systab, addr, npages, end_pfn; void *p, *va; efi.systab = NULL; @@ -479,7 +479,10 @@ void __init efi_enter_virtual_mode(void) size = md->num_pages << EFI_PAGE_SHIFT; end = md->phys_addr + size; - if (PFN_UP(end) <= max_low_pfn_mapped) + end_pfn = PFN_UP(end); + if (end_pfn <= max_low_pfn_mapped + || (end_pfn > (1UL << (32 - PAGE_SHIFT)) + && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); else va = efi_ioremap(md->phys_addr, size); diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index 652c5287215f..cb783b92c50c 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -99,24 +99,11 @@ void __init efi_call_phys_epilog(void) void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { - static unsigned pages_mapped __initdata; - unsigned i, pages; - unsigned long offset; + unsigned long last_map_pfn; - pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr); - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; - - if (pages_mapped + pages > MAX_EFI_IO_PAGES) + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) return NULL; - for (i = 0; i < pages; i++) { - __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped, - phys_addr, PAGE_KERNEL); - phys_addr += PAGE_SIZE; - pages_mapped++; - } - - return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \ - (pages_mapped - pages)) + offset; + return (void __iomem *)__va(phys_addr); } -- cgit v1.2.3 From ab9e18587f4cdb5f3fb3854c732f27a36f98e8f6 Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Wed, 4 Mar 2009 19:42:27 +0100 Subject: x86, math-emu: fix init_fpu for task != current MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Impact: fix math-emu related crash while using GDB/ptrace init_fpu() calls finit to initialize a task's xstate, while finit always works on the current task. If we use PTRACE_GETFPREGS on another process and both processes did not already use floating point, we get a null pointer exception in finit. This patch creates a new function finit_task that takes a task_struct parameter. finit becomes a wrapper that simply calls finit_task with current. On the plus side this avoids many calls to get_current which would each resolve to an inline assembler mov instruction. An empty finit_task has been added to i387.h to avoid linker errors in case the compiler still emits the call in init_fpu when CONFIG_MATH_EMULATION is not defined. The declaration of finit in i387.h has been removed as the remaining code using this function gets its prototype from fpu_proto.h. Signed-off-by: Daniel Glöckner Cc: Suresh Siddha Cc: "Pallipadi Venkatesh" Cc: Arjan van de Ven Cc: Bill Metzenthen LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/i387.h | 8 +++++++- arch/x86/kernel/i387.c | 2 +- arch/x86/math-emu/fpu_aux.c | 31 ++++++++++++++++++++----------- 3 files changed, 28 insertions(+), 13 deletions(-) diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 48f0004db8c9..71c9e5183982 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -172,7 +172,13 @@ static inline void __save_init_fpu(struct task_struct *tsk) #else /* CONFIG_X86_32 */ -extern void finit(void); +#ifdef CONFIG_MATH_EMULATION +extern void finit_task(struct task_struct *tsk); +#else +static inline void finit_task(struct task_struct *tsk) +{ +} +#endif static inline void tolerant_fwait(void) { diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index b0f61f0dcd0a..f2f8540a7f3d 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -136,7 +136,7 @@ int init_fpu(struct task_struct *tsk) #ifdef CONFIG_X86_32 if (!HAVE_HWFP) { memset(tsk->thread.xstate, 0, xstate_size); - finit(); + finit_task(tsk); set_stopped_child_used_math(tsk); return 0; } diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c index 491e737ce547..aa0987088774 100644 --- a/arch/x86/math-emu/fpu_aux.c +++ b/arch/x86/math-emu/fpu_aux.c @@ -30,20 +30,29 @@ static void fclex(void) } /* Needs to be externally visible */ -void finit(void) +void finit_task(struct task_struct *tsk) { - control_word = 0x037f; - partial_status = 0; - top = 0; /* We don't keep top in the status word internally. */ - fpu_tag_word = 0xffff; + struct i387_soft_struct *soft = &tsk->thread.xstate->soft; + struct address *oaddr, *iaddr; + soft->cwd = 0x037f; + soft->swd = 0; + soft->ftop = 0; /* We don't keep top in the status word internally. */ + soft->twd = 0xffff; /* The behaviour is different from that detailed in Section 15.1.6 of the Intel manual */ - operand_address.offset = 0; - operand_address.selector = 0; - instruction_address.offset = 0; - instruction_address.selector = 0; - instruction_address.opcode = 0; - no_ip_update = 1; + oaddr = (struct address *)&soft->foo; + oaddr->offset = 0; + oaddr->selector = 0; + iaddr = (struct address *)&soft->fip; + iaddr->offset = 0; + iaddr->selector = 0; + iaddr->opcode = 0; + soft->no_update = 1; +} + +void finit(void) +{ + finit_task(current); } /* -- cgit v1.2.3 From dd4124a8a06bca89c077a16437edac010f0bb993 Mon Sep 17 00:00:00 2001 From: Leann Ogasawara Date: Wed, 4 Mar 2009 11:53:00 -0800 Subject: x86: add Dell XPS710 reboot quirk Dell XPS710 will hang on reboot. This is resolved by adding a quirk to set bios reboot. Signed-off-by: Leann Ogasawara Signed-off-by: Tim Gardner Cc: "manoj.iyer" Cc: LKML-Reference: <1236196380.3231.89.camel@emiko> Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2b46eb41643b..4526b3a75ed2 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -217,6 +217,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), }, }, + { /* Handle problems with rebooting on Dell XPS710 */ + .callback = set_bios_reboot, + .ident = "Dell XPS710", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), + }, + }, { } }; -- cgit v1.2.3 From 3ea0d7cf472c6118bb8c0842d606f5436251e179 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 4 Mar 2009 14:22:50 -0300 Subject: ALSA: hda - Add 4 channel mode for 3stack-hp model (ALC888) Add additional 4 channel mode for 3stack-hp models. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8c02f789e4fc..3696ff31838f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8068,24 +8068,45 @@ static struct hda_verb alc888_6st_dell_verbs[] = { { } }; +/* + * 2ch mode + */ static struct hda_verb alc888_3st_hp_2ch_init[] = { { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, { 0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, - { } + { } /* end */ }; +/* + * 4ch mode + */ +static struct hda_verb alc888_3st_hp_4ch_init[] = { + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x16, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +/* + * 6ch mode + */ static struct hda_verb alc888_3st_hp_6ch_init[] = { { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, - { } + { 0x16, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ }; -static struct hda_channel_mode alc888_3st_hp_modes[2] = { +static struct hda_channel_mode alc888_3st_hp_modes[3] = { { 2, alc888_3st_hp_2ch_init }, + { 4, alc888_3st_hp_4ch_init }, { 6, alc888_3st_hp_6ch_init }, }; -- cgit v1.2.3 From 8718b700ccbcc3c6016d38a75e005293c3660f1c Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 4 Mar 2009 14:22:51 -0300 Subject: ALSA: hda - Add headphone automute support for 3stack-hp model (ALC888) Mute speaker outputs on headphone insertion for machines that use 3stack-hp model. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 38 +++++++++++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3696ff31838f..251647d8b5b9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8056,16 +8056,42 @@ static struct hda_verb alc888_lenovo_sky_verbs[] = { { } /* end */ }; +static struct hda_verb alc888_6st_dell_verbs[] = { + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + { } +}; + +static void alc888_3st_hp_front_automute(struct hda_codec *codec) +{ + unsigned int present, bits; + + present = snd_hda_codec_read(codec, 0x1b, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); + snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); + snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc888_3st_hp_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc888_3st_hp_front_automute(codec); + break; + } +} + static struct hda_verb alc888_3st_hp_verbs[] = { {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Front: output 0 (0x0c) */ {0x16, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Rear : output 1 (0x0d) */ {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* CLFE : output 2 (0x0e) */ - { } -}; - -static struct hda_verb alc888_6st_dell_verbs[] = { {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, - { } + { } /* end */ }; /* @@ -8950,6 +8976,8 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc888_3st_hp_modes, .need_dac_fix = 1, .input_mux = &alc883_capture_source, + .unsol_event = alc888_3st_hp_unsol_event, + .init_hook = alc888_3st_hp_front_automute, }, [ALC888_6ST_DELL] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, -- cgit v1.2.3 From 7ec30f0e7768985ab2ef6334840e3fc8fa253421 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 4 Mar 2009 14:22:52 -0300 Subject: ALSA: hda - Map 3stack-hp model (ALC888) for HP Educ.ar Added model=3stack-hp for HP Educ.ar desktop machine (103c:2a72). Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 251647d8b5b9..91ef9f27b120 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8673,6 +8673,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG), SND_PCI_QUIRK(0x103c, 0x2a66, "HP Acacia", ALC888_3ST_HP), + SND_PCI_QUIRK(0x103c, 0x2a72, "HP Educ.ar", ALC888_3ST_HP), SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V), SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG), SND_PCI_QUIRK(0x1043, 0x8284, "Asus Z37E", ALC883_6ST_DIG), -- cgit v1.2.3 From 64ca5ab913f1594ef316556e65f5eae63ff50cee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 4 Mar 2009 12:11:56 -0800 Subject: rcu: increment quiescent state counter in ksoftirqd() If a machine is flooded by network frames, a cpu can loop 100% of its time inside ksoftirqd() without calling schedule(). This can delay RCU grace period to insane values. Adding rcu_qsctr_inc() call in ksoftirqd() solves this problem. Paul: "This regression was a result of the recent change from "schedule()" to "cond_resched()", which got rid of that quiescent state in the common case where a reschedule is not needed". Signed-off-by: Eric Dumazet Reviewed-by: Paul E. McKenney Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/softirq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/softirq.c b/kernel/softirq.c index bdbe9de9cd8d..9041ea7948fe 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -626,6 +626,7 @@ static int ksoftirqd(void * __bind_cpu) preempt_enable_no_resched(); cond_resched(); preempt_disable(); + rcu_qsctr_inc((long)__bind_cpu); } preempt_enable(); set_current_state(TASK_INTERRUPTIBLE); -- cgit v1.2.3 From 113a0e4590881ce579ca992a80ddc562b3372ede Mon Sep 17 00:00:00 2001 From: etienne Date: Wed, 4 Mar 2009 07:33:51 +0100 Subject: smack: fixes for unlabeled host support The following patch (against 2.6.29rc5) fixes a few issues in the smack/netlabel "unlabeled host support" functionnality that was added in 2.6.29rc. It should go in before -final. 1) smack_host_label disregard a "0.0.0.0/0 @" rule (or other label), preventing 'tagged' tasks to access Internet (many systems drop packets with IP options) 2) netmasks were not handled correctly, they were stored in a way _not equivalent_ to conversion to be32 (it was equivalent for /0, /8, /16, /24, /32 masks but not other masks) 3) smack_netlbladdr prefixes (IP/mask) were not consistent (mask&IP was not done), so there could have been different list entries for the same IP prefix; if those entries had different labels, well ... 4) they were not sorted 1) 2) 3) are bugs, 4) is a more cosmetic issue. The patch : -creates a new helper smk_netlbladdr_insert to insert a smk_netlbladdr, -sorted by netmask length -use the new sorted nature of smack_netlbladdrs list to simplify smack_host_label : the first match _will_ be the more specific -corrects endianness issues in smk_write_netlbladdr & netlbladdr_seq_show Signed-off-by: Acked-by: Casey Schaufler Reviewed-by: Paul Moore Signed-off-by: James Morris --- security/smack/smackfs.c | 64 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 49 insertions(+), 15 deletions(-) diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index fd8d1eb43700..a1b57e4dba3e 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -651,10 +651,6 @@ static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos) return skp; } -/* -#define BEMASK 0x80000000 -*/ -#define BEMASK 0x00000001 #define BEBITS (sizeof(__be32) * 8) /* @@ -664,12 +660,10 @@ static int netlbladdr_seq_show(struct seq_file *s, void *v) { struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v; unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr; - __be32 bebits; - int maskn = 0; + int maskn; + u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr); - for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1) - if ((skp->smk_mask.s_addr & bebits) == 0) - break; + for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++); seq_printf(s, "%u.%u.%u.%u/%d %s\n", hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label); @@ -702,6 +696,42 @@ static int smk_open_netlbladdr(struct inode *inode, struct file *file) return seq_open(file, &netlbladdr_seq_ops); } +/** + * smk_netlbladdr_insert + * @new : netlabel to insert + * + * This helper insert netlabel in the smack_netlbladdrs list + * sorted by netmask length (longest to smallest) + */ +static void smk_netlbladdr_insert(struct smk_netlbladdr *new) +{ + struct smk_netlbladdr *m; + + if (smack_netlbladdrs == NULL) { + smack_netlbladdrs = new; + return; + } + + /* the comparison '>' is a bit hacky, but works */ + if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) { + new->smk_next = smack_netlbladdrs; + smack_netlbladdrs = new; + return; + } + for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) { + if (m->smk_next == NULL) { + m->smk_next = new; + return; + } + if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) { + new->smk_next = m->smk_next; + m->smk_next = new; + return; + } + } +} + + /** * smk_write_netlbladdr - write() for /smack/netlabel * @file: file pointer, not actually used @@ -725,8 +755,9 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, struct netlbl_audit audit_info; struct in_addr mask; unsigned int m; - __be32 bebits = BEMASK; + u32 mask_bits = (1<<31); __be32 nsa; + u32 temp_mask; /* * Must have privilege. @@ -762,10 +793,13 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, if (sp == NULL) return -EINVAL; - for (mask.s_addr = 0; m > 0; m--) { - mask.s_addr |= bebits; - bebits <<= 1; + for (temp_mask = 0; m > 0; m--) { + temp_mask |= mask_bits; + mask_bits >>= 1; } + mask.s_addr = cpu_to_be32(temp_mask); + + newname.sin_addr.s_addr &= mask.s_addr; /* * Only allow one writer at a time. Writes should be * quite rare and small in any case. @@ -773,6 +807,7 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, mutex_lock(&smk_netlbladdr_lock); nsa = newname.sin_addr.s_addr; + /* try to find if the prefix is already in the list */ for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next) if (skp->smk_host.sin_addr.s_addr == nsa && skp->smk_mask.s_addr == mask.s_addr) @@ -788,9 +823,8 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, rc = 0; skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr; skp->smk_mask.s_addr = mask.s_addr; - skp->smk_next = smack_netlbladdrs; skp->smk_label = sp; - smack_netlbladdrs = skp; + smk_netlbladdr_insert(skp); } } else { rc = netlbl_cfg_unlbl_static_del(&init_net, NULL, -- cgit v1.2.3 From 211a40c0870457b29100cffea0180fa5083caf96 Mon Sep 17 00:00:00 2001 From: etienne Date: Wed, 4 Mar 2009 07:33:51 +0100 Subject: smack: fixes for unlabeled host support The following patch (against 2.6.29rc5) fixes a few issues in the smack/netlabel "unlabeled host support" functionnality that was added in 2.6.29rc. It should go in before -final. 1) smack_host_label disregard a "0.0.0.0/0 @" rule (or other label), preventing 'tagged' tasks to access Internet (many systems drop packets with IP options) 2) netmasks were not handled correctly, they were stored in a way _not equivalent_ to conversion to be32 (it was equivalent for /0, /8, /16, /24, /32 masks but not other masks) 3) smack_netlbladdr prefixes (IP/mask) were not consistent (mask&IP was not done), so there could have been different list entries for the same IP prefix; if those entries had different labels, well ... 4) they were not sorted 1) 2) 3) are bugs, 4) is a more cosmetic issue. The patch : -creates a new helper smk_netlbladdr_insert to insert a smk_netlbladdr, -sorted by netmask length -use the new sorted nature of smack_netlbladdrs list to simplify smack_host_label : the first match _will_ be the more specific -corrects endianness issues in smk_write_netlbladdr & netlbladdr_seq_show Signed-off-by: Acked-by: Casey Schaufler Reviewed-by: Paul Moore Signed-off-by: James Morris --- security/smack/smack_lsm.c | 43 ++++++------------------------- security/smack/smackfs.c | 64 +++++++++++++++++++++++++++++++++++----------- 2 files changed, 57 insertions(+), 50 deletions(-) diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 0278bc083044..e7ded1326b0f 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -1498,58 +1498,31 @@ static int smack_socket_post_create(struct socket *sock, int family, * looks for host based access restrictions * * This version will only be appropriate for really small - * sets of single label hosts. Because of the masking - * it cannot shortcut out on the first match. There are - * numerious ways to address the problem, but none of them - * have been applied here. + * sets of single label hosts. * * Returns the label of the far end or NULL if it's not special. */ static char *smack_host_label(struct sockaddr_in *sip) { struct smk_netlbladdr *snp; - char *bestlabel = NULL; struct in_addr *siap = &sip->sin_addr; - struct in_addr *liap; - struct in_addr *miap; - struct in_addr bestmask; if (siap->s_addr == 0) return NULL; - bestmask.s_addr = 0; - for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) { - liap = &snp->smk_host.sin_addr; - miap = &snp->smk_mask; - /* - * If the addresses match after applying the list entry mask - * the entry matches the address. If it doesn't move along to - * the next entry. - */ - if ((liap->s_addr & miap->s_addr) != - (siap->s_addr & miap->s_addr)) - continue; /* - * If the list entry mask identifies a single address - * it can't get any more specific. + * we break after finding the first match because + * the list is sorted from longest to shortest mask + * so we have found the most specific match */ - if (miap->s_addr == 0xffffffff) + if ((&snp->smk_host.sin_addr)->s_addr == + (siap->s_addr & (&snp->smk_mask)->s_addr)) { return snp->smk_label; - /* - * If the list entry mask is less specific than the best - * already found this entry is uninteresting. - */ - if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr) - continue; - /* - * This is better than any entry found so far. - */ - bestmask.s_addr = miap->s_addr; - bestlabel = snp->smk_label; + } } - return bestlabel; + return NULL; } /** diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index 8e42800878f4..51f0efc50dab 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -650,10 +650,6 @@ static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos) return skp; } -/* -#define BEMASK 0x80000000 -*/ -#define BEMASK 0x00000001 #define BEBITS (sizeof(__be32) * 8) /* @@ -663,12 +659,10 @@ static int netlbladdr_seq_show(struct seq_file *s, void *v) { struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v; unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr; - __be32 bebits; - int maskn = 0; + int maskn; + u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr); - for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1) - if ((skp->smk_mask.s_addr & bebits) == 0) - break; + for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++); seq_printf(s, "%u.%u.%u.%u/%d %s\n", hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label); @@ -701,6 +695,42 @@ static int smk_open_netlbladdr(struct inode *inode, struct file *file) return seq_open(file, &netlbladdr_seq_ops); } +/** + * smk_netlbladdr_insert + * @new : netlabel to insert + * + * This helper insert netlabel in the smack_netlbladdrs list + * sorted by netmask length (longest to smallest) + */ +static void smk_netlbladdr_insert(struct smk_netlbladdr *new) +{ + struct smk_netlbladdr *m; + + if (smack_netlbladdrs == NULL) { + smack_netlbladdrs = new; + return; + } + + /* the comparison '>' is a bit hacky, but works */ + if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) { + new->smk_next = smack_netlbladdrs; + smack_netlbladdrs = new; + return; + } + for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) { + if (m->smk_next == NULL) { + m->smk_next = new; + return; + } + if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) { + new->smk_next = m->smk_next; + m->smk_next = new; + return; + } + } +} + + /** * smk_write_netlbladdr - write() for /smack/netlabel * @filp: file pointer, not actually used @@ -724,8 +754,9 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, struct netlbl_audit audit_info; struct in_addr mask; unsigned int m; - __be32 bebits = BEMASK; + u32 mask_bits = (1<<31); __be32 nsa; + u32 temp_mask; /* * Must have privilege. @@ -761,10 +792,13 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, if (sp == NULL) return -EINVAL; - for (mask.s_addr = 0; m > 0; m--) { - mask.s_addr |= bebits; - bebits <<= 1; + for (temp_mask = 0; m > 0; m--) { + temp_mask |= mask_bits; + mask_bits >>= 1; } + mask.s_addr = cpu_to_be32(temp_mask); + + newname.sin_addr.s_addr &= mask.s_addr; /* * Only allow one writer at a time. Writes should be * quite rare and small in any case. @@ -772,6 +806,7 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, mutex_lock(&smk_netlbladdr_lock); nsa = newname.sin_addr.s_addr; + /* try to find if the prefix is already in the list */ for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next) if (skp->smk_host.sin_addr.s_addr == nsa && skp->smk_mask.s_addr == mask.s_addr) @@ -787,9 +822,8 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf, rc = 0; skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr; skp->smk_mask.s_addr = mask.s_addr; - skp->smk_next = smack_netlbladdrs; skp->smk_label = sp; - smack_netlbladdrs = skp; + smk_netlbladdr_insert(skp); } } else { rc = netlbl_cfg_unlbl_static_del(&init_net, NULL, -- cgit v1.2.3 From 6335d05548eece40092000aa91b64a50310d69d5 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 3 Mar 2009 09:41:00 +0800 Subject: ASoC: make ops a pointer in 'struct snd_soc_dai' Considering the fact that most cpu_dai or codec_dai are using a same 'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better made a pointer instead, to make sharing easier and code a bit cleaner. The patch below is rather preliminary since the asoc tree is being actively developed, and this touches almost every piece of code, (and possibly many others in development need to be changed as well). Building of all codecs are OK, yet to every SoC, I didn't test that. Signed-off-by: Eric Miao Acked-by: Timur Tabi Signed-off-by: Mark Brown --- include/sound/soc-dai.h | 2 +- sound/soc/atmel/atmel_ssc_dai.c | 33 +++++-------- sound/soc/au1x/psc-ac97.c | 10 ++-- sound/soc/au1x/psc-i2s.c | 12 +++-- sound/soc/blackfin/bf5xx-i2s.c | 14 +++--- sound/soc/codecs/ac97.c | 7 ++- sound/soc/codecs/ak4535.c | 14 +++--- sound/soc/codecs/cs4270.c | 14 +++--- sound/soc/codecs/ssm2602.c | 20 ++++---- sound/soc/codecs/tlv320aic23.c | 18 ++++--- sound/soc/codecs/tlv320aic26.c | 14 +++--- sound/soc/codecs/tlv320aic3x.c | 14 +++--- sound/soc/codecs/uda134x.c | 18 ++++--- sound/soc/codecs/uda1380.c | 46 ++++++++++-------- sound/soc/codecs/wm8350.c | 20 ++++---- sound/soc/codecs/wm8510.c | 16 +++--- sound/soc/codecs/wm8580.c | 30 +++++++----- sound/soc/codecs/wm8728.c | 12 +++-- sound/soc/codecs/wm8731.c | 18 ++++--- sound/soc/codecs/wm8750.c | 14 +++--- sound/soc/codecs/wm8753.c | 90 +++++++++++++++++++--------------- sound/soc/codecs/wm8900.c | 16 +++--- sound/soc/codecs/wm8903.c | 18 ++++--- sound/soc/codecs/wm8971.c | 14 +++--- sound/soc/codecs/wm8990.c | 18 ++++--- sound/soc/codecs/wm9705.c | 8 +-- sound/soc/codecs/wm9712.c | 14 ++++-- sound/soc/codecs/wm9713.c | 40 +++++++++------ sound/soc/davinci/davinci-i2s.c | 14 +++--- sound/soc/fsl/fsl_ssi.c | 18 ++++--- sound/soc/fsl/mpc5200_psc_i2s.c | 20 ++++---- sound/soc/omap/omap-mcbsp.c | 20 ++++---- sound/soc/pxa/pxa-ssp.c | 65 +++++++------------------ sound/soc/pxa/pxa2xx-ac97.c | 13 ++--- sound/soc/pxa/pxa2xx-i2s.c | 18 ++++--- sound/soc/s3c24xx/s3c2412-i2s.c | 16 +++--- sound/soc/s3c24xx/s3c2443-ac97.c | 13 ++--- sound/soc/s3c24xx/s3c24xx-i2s.c | 16 +++--- sound/soc/sh/ssi.c | 30 +++++------- sound/soc/soc-core.c | 102 +++++++++++++++++++++------------------ 40 files changed, 481 insertions(+), 428 deletions(-) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 24247f763608..13676472ddfc 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -203,7 +203,7 @@ struct snd_soc_dai { int (*resume)(struct snd_soc_dai *dai); /* ops */ - struct snd_soc_dai_ops ops; + struct snd_soc_dai_ops *ops; /* DAI capabilities */ struct snd_soc_pcm_stream capture; diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index ff0054b76502..e588e63f18d2 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -697,6 +697,15 @@ static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) #define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops atmel_ssc_dai_ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv, +}; + struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { { .name = "atmel-ssc0", .id = 0, @@ -712,13 +721,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, - .ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .ops = &atmel_ssc_dai_ops, .private_data = &ssc_info[0], }, #if NUM_SSC_DEVICES == 3 @@ -736,13 +739,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, - .ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .ops = &atmel_ssc_dai_ops, .private_data = &ssc_info[1], }, { .name = "atmel-ssc2", @@ -759,13 +756,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, - .ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .ops = &atmel_ssc_dai_ops, .private_data = &ssc_info[2], }, #endif diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c index f0e30aec7f23..479d7bdf1865 100644 --- a/sound/soc/au1x/psc-ac97.c +++ b/sound/soc/au1x/psc-ac97.c @@ -342,6 +342,11 @@ static int au1xpsc_ac97_resume(struct snd_soc_dai *dai) return 0; } +static struct snd_soc_dai_ops au1xpsc_ac97_dai_ops = { + .trigger = au1xpsc_ac97_trigger, + .hw_params = au1xpsc_ac97_hw_params, +}; + struct snd_soc_dai au1xpsc_ac97_dai = { .name = "au1xpsc_ac97", .ac97_control = 1, @@ -361,10 +366,7 @@ struct snd_soc_dai au1xpsc_ac97_dai = { .channels_min = 2, .channels_max = 2, }, - .ops = { - .trigger = au1xpsc_ac97_trigger, - .hw_params = au1xpsc_ac97_hw_params, - }, + .ops = &au1xpsc_ac97_dai_ops, }; EXPORT_SYMBOL_GPL(au1xpsc_ac97_dai); diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c index f916de4400ed..bb589327ee32 100644 --- a/sound/soc/au1x/psc-i2s.c +++ b/sound/soc/au1x/psc-i2s.c @@ -367,6 +367,12 @@ static int au1xpsc_i2s_resume(struct snd_soc_dai *cpu_dai) return 0; } +static struct snd_soc_dai_ops au1xpsc_i2s_dai_ops = { + .trigger = au1xpsc_i2s_trigger, + .hw_params = au1xpsc_i2s_hw_params, + .set_fmt = au1xpsc_i2s_set_fmt, +}; + struct snd_soc_dai au1xpsc_i2s_dai = { .name = "au1xpsc_i2s", .probe = au1xpsc_i2s_probe, @@ -385,11 +391,7 @@ struct snd_soc_dai au1xpsc_i2s_dai = { .channels_min = 2, .channels_max = 8, /* 2 without external help */ }, - .ops = { - .trigger = au1xpsc_i2s_trigger, - .hw_params = au1xpsc_i2s_hw_params, - .set_fmt = au1xpsc_i2s_set_fmt, - }, + .ops = &au1xpsc_i2s_dai_ops, }; EXPORT_SYMBOL(au1xpsc_i2s_dai); diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c index d1d95d2393fe..964824419678 100644 --- a/sound/soc/blackfin/bf5xx-i2s.c +++ b/sound/soc/blackfin/bf5xx-i2s.c @@ -287,6 +287,13 @@ static int bf5xx_i2s_resume(struct platform_device *pdev, #define BF5XX_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |\ SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops bf5xx_i2s_dai_ops = { + .startup = bf5xx_i2s_startup, + .shutdown = bf5xx_i2s_shutdown, + .hw_params = bf5xx_i2s_hw_params, + .set_fmt = bf5xx_i2s_set_dai_fmt, +}; + struct snd_soc_dai bf5xx_i2s_dai = { .name = "bf5xx-i2s", .id = 0, @@ -304,12 +311,7 @@ struct snd_soc_dai bf5xx_i2s_dai = { .channels_max = 2, .rates = BF5XX_I2S_RATES, .formats = BF5XX_I2S_FORMATS,}, - .ops = { - .startup = bf5xx_i2s_startup, - .shutdown = bf5xx_i2s_shutdown, - .hw_params = bf5xx_i2s_hw_params, - .set_fmt = bf5xx_i2s_set_dai_fmt, - }, + .ops = &bf5xx_i2s_dai_ops, }; EXPORT_SYMBOL_GPL(bf5xx_i2s_dai); diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 11f84b6e5cb8..b0d4af145b87 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -41,6 +41,10 @@ static int ac97_prepare(struct snd_pcm_substream *substream, SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 |\ SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops ac97_dai_ops = { + .prepare = ac97_prepare, +}; + struct snd_soc_dai ac97_dai = { .name = "AC97 HiFi", .ac97_control = 1, @@ -56,8 +60,7 @@ struct snd_soc_dai ac97_dai = { .channels_max = 2, .rates = STD_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .prepare = ac97_prepare,}, + .ops = &ac97_dai_ops, }; EXPORT_SYMBOL_GPL(ac97_dai); diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index d56e6bb1fedb..1f63d387a2f4 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -421,6 +421,13 @@ static int ak4535_set_bias_level(struct snd_soc_codec *codec, SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops ak4535_dai_ops = { + .hw_params = ak4535_hw_params, + .set_fmt = ak4535_set_dai_fmt, + .digital_mute = ak4535_mute, + .set_sysclk = ak4535_set_dai_sysclk, +}; + struct snd_soc_dai ak4535_dai = { .name = "AK4535", .playback = { @@ -435,12 +442,7 @@ struct snd_soc_dai ak4535_dai = { .channels_max = 2, .rates = AK4535_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = ak4535_hw_params, - .set_fmt = ak4535_set_dai_fmt, - .digital_mute = ak4535_mute, - .set_sysclk = ak4535_set_dai_sysclk, - }, + .ops = &ak4535_dai_ops, }; EXPORT_SYMBOL_GPL(ak4535_dai); diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f86f33cc1798..7ae3d6520e3f 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -503,6 +503,13 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { */ static struct snd_soc_codec *cs4270_codec; +static struct snd_soc_dai_ops cs4270_dai_ops = { + .hw_params = cs4270_hw_params, + .set_sysclk = cs4270_set_dai_sysclk, + .set_fmt = cs4270_set_dai_fmt, + .digital_mute = cs4270_mute, +}; + struct snd_soc_dai cs4270_dai = { .name = "cs4270", .playback = { @@ -519,12 +526,7 @@ struct snd_soc_dai cs4270_dai = { .rates = 0, .formats = CS4270_FORMATS, }, - .ops = { - .hw_params = cs4270_hw_params, - .set_sysclk = cs4270_set_dai_sysclk, - .set_fmt = cs4270_set_dai_fmt, - .digital_mute = cs4270_mute, - }, + .ops = &cs4270_dai_ops, }; EXPORT_SYMBOL_GPL(cs4270_dai); diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index 58e225dadc7e..87f606c76822 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -506,6 +506,16 @@ static int ssm2602_set_bias_level(struct snd_soc_codec *codec, #define SSM2602_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops ssm2602_dai_ops = { + .startup = ssm2602_startup, + .prepare = ssm2602_pcm_prepare, + .hw_params = ssm2602_hw_params, + .shutdown = ssm2602_shutdown, + .digital_mute = ssm2602_mute, + .set_sysclk = ssm2602_set_dai_sysclk, + .set_fmt = ssm2602_set_dai_fmt, +}; + struct snd_soc_dai ssm2602_dai = { .name = "SSM2602", .playback = { @@ -520,15 +530,7 @@ struct snd_soc_dai ssm2602_dai = { .channels_max = 2, .rates = SSM2602_RATES, .formats = SSM2602_FORMATS,}, - .ops = { - .startup = ssm2602_startup, - .prepare = ssm2602_pcm_prepare, - .hw_params = ssm2602_hw_params, - .shutdown = ssm2602_shutdown, - .digital_mute = ssm2602_mute, - .set_sysclk = ssm2602_set_dai_sysclk, - .set_fmt = ssm2602_set_dai_fmt, - } + .ops = &ssm2602_dai_ops, }; EXPORT_SYMBOL_GPL(ssm2602_dai); diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 8b20c360adf5..c3f4afb5d017 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -580,6 +580,15 @@ static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec, #define AIC23_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops tlv320aic23_dai_ops = { + .prepare = tlv320aic23_pcm_prepare, + .hw_params = tlv320aic23_hw_params, + .shutdown = tlv320aic23_shutdown, + .digital_mute = tlv320aic23_mute, + .set_fmt = tlv320aic23_set_dai_fmt, + .set_sysclk = tlv320aic23_set_dai_sysclk, +}; + struct snd_soc_dai tlv320aic23_dai = { .name = "tlv320aic23", .playback = { @@ -594,14 +603,7 @@ struct snd_soc_dai tlv320aic23_dai = { .channels_max = 2, .rates = AIC23_RATES, .formats = AIC23_FORMATS,}, - .ops = { - .prepare = tlv320aic23_pcm_prepare, - .hw_params = tlv320aic23_hw_params, - .shutdown = tlv320aic23_shutdown, - .digital_mute = tlv320aic23_mute, - .set_fmt = tlv320aic23_set_dai_fmt, - .set_sysclk = tlv320aic23_set_dai_sysclk, - } + .ops = &tlv320aic23_dai_ops, }; EXPORT_SYMBOL_GPL(tlv320aic23_dai); diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c index 229e464cf713..a7f333fc579e 100644 --- a/sound/soc/codecs/tlv320aic26.c +++ b/sound/soc/codecs/tlv320aic26.c @@ -270,6 +270,13 @@ static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) #define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\ SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) +static struct snd_soc_dai_ops aic26_dai_ops = { + .hw_params = aic26_hw_params, + .digital_mute = aic26_mute, + .set_sysclk = aic26_set_sysclk, + .set_fmt = aic26_set_fmt, +}; + struct snd_soc_dai aic26_dai = { .name = "tlv320aic26", .playback = { @@ -286,12 +293,7 @@ struct snd_soc_dai aic26_dai = { .rates = AIC26_RATES, .formats = AIC26_FORMATS, }, - .ops = { - .hw_params = aic26_hw_params, - .digital_mute = aic26_mute, - .set_sysclk = aic26_set_sysclk, - .set_fmt = aic26_set_fmt, - }, + .ops = &aic26_dai_ops, }; EXPORT_SYMBOL_GPL(aic26_dai); diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index d638e3f0728b..ab099f482487 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1088,6 +1088,13 @@ EXPORT_SYMBOL_GPL(aic3x_button_pressed); #define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops aic3x_dai_ops = { + .hw_params = aic3x_hw_params, + .digital_mute = aic3x_mute, + .set_sysclk = aic3x_set_dai_sysclk, + .set_fmt = aic3x_set_dai_fmt, +}; + struct snd_soc_dai aic3x_dai = { .name = "tlv320aic3x", .playback = { @@ -1102,12 +1109,7 @@ struct snd_soc_dai aic3x_dai = { .channels_max = 2, .rates = AIC3X_RATES, .formats = AIC3X_FORMATS,}, - .ops = { - .hw_params = aic3x_hw_params, - .digital_mute = aic3x_mute, - .set_sysclk = aic3x_set_dai_sysclk, - .set_fmt = aic3x_set_dai_fmt, - } + .ops = &aic3x_dai_ops, }; EXPORT_SYMBOL_GPL(aic3x_dai); diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index 661599295ca7..ddefb8f80145 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -431,6 +431,15 @@ SOC_ENUM("PCM Playback De-emphasis", uda134x_mixer_enum[1]), SOC_SINGLE("DC Filter Enable Switch", UDA134X_STATUS0, 0, 1, 0), }; +static struct snd_soc_dai_ops uda134x_dai_ops = { + .startup = uda134x_startup, + .shutdown = uda134x_shutdown, + .hw_params = uda134x_hw_params, + .digital_mute = uda134x_mute, + .set_sysclk = uda134x_set_dai_sysclk, + .set_fmt = uda134x_set_dai_fmt, +}; + struct snd_soc_dai uda134x_dai = { .name = "UDA134X", /* playback capabilities */ @@ -450,14 +459,7 @@ struct snd_soc_dai uda134x_dai = { .formats = UDA134X_FORMATS, }, /* pcm operations */ - .ops = { - .startup = uda134x_startup, - .shutdown = uda134x_shutdown, - .hw_params = uda134x_hw_params, - .digital_mute = uda134x_mute, - .set_sysclk = uda134x_set_dai_sysclk, - .set_fmt = uda134x_set_dai_fmt, - } + .ops = &uda134x_dai_ops, }; EXPORT_SYMBOL(uda134x_dai); diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index 5242b8156b38..cafa7684c0e7 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -583,6 +583,29 @@ static int uda1380_set_bias_level(struct snd_soc_codec *codec, SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops uda1380_dai_ops = { + .hw_params = uda1380_pcm_hw_params, + .shutdown = uda1380_pcm_shutdown, + .prepare = uda1380_pcm_prepare, + .digital_mute = uda1380_mute, + .set_fmt = uda1380_set_dai_fmt_both, +}; + +static struct snd_soc_dai_ops uda1380_dai_ops_playback = { + .hw_params = uda1380_pcm_hw_params, + .shutdown = uda1380_pcm_shutdown, + .prepare = uda1380_pcm_prepare, + .digital_mute = uda1380_mute, + .set_fmt = uda1380_set_dai_fmt_playback, +}; + +static struct snd_soc_dai_ops uda1380_dai_ops_capture = { + .hw_params = uda1380_pcm_hw_params, + .shutdown = uda1380_pcm_shutdown, + .prepare = uda1380_pcm_prepare, + .set_fmt = uda1380_set_dai_fmt_capture, +}; + struct snd_soc_dai uda1380_dai[] = { { .name = "UDA1380", @@ -598,13 +621,7 @@ struct snd_soc_dai uda1380_dai[] = { .channels_max = 2, .rates = UDA1380_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = uda1380_pcm_hw_params, - .shutdown = uda1380_pcm_shutdown, - .prepare = uda1380_pcm_prepare, - .digital_mute = uda1380_mute, - .set_fmt = uda1380_set_dai_fmt_both, - }, + .ops = &uda1380_dai_ops, }, { /* playback only - dual interface */ .name = "UDA1380", @@ -615,13 +632,7 @@ struct snd_soc_dai uda1380_dai[] = { .rates = UDA1380_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE, }, - .ops = { - .hw_params = uda1380_pcm_hw_params, - .shutdown = uda1380_pcm_shutdown, - .prepare = uda1380_pcm_prepare, - .digital_mute = uda1380_mute, - .set_fmt = uda1380_set_dai_fmt_playback, - }, + .ops = &uda1380_dai_ops_playback, }, { /* capture only - dual interface*/ .name = "UDA1380", @@ -632,12 +643,7 @@ struct snd_soc_dai uda1380_dai[] = { .rates = UDA1380_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE, }, - .ops = { - .hw_params = uda1380_pcm_hw_params, - .shutdown = uda1380_pcm_shutdown, - .prepare = uda1380_pcm_prepare, - .set_fmt = uda1380_set_dai_fmt_capture, - }, + .ops = &uda1380_dai_ops_capture, }, }; EXPORT_SYMBOL_GPL(uda1380_dai); diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 359e5cc86f34..3b1d0993bed9 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1538,6 +1538,16 @@ static int wm8350_remove(struct platform_device *pdev) SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) +static struct snd_soc_dai_ops wm8350_dai_ops = { + .hw_params = wm8350_pcm_hw_params, + .digital_mute = wm8350_mute, + .trigger = wm8350_pcm_trigger, + .set_fmt = wm8350_set_dai_fmt, + .set_sysclk = wm8350_set_dai_sysclk, + .set_pll = wm8350_set_fll, + .set_clkdiv = wm8350_set_clkdiv, +}; + struct snd_soc_dai wm8350_dai = { .name = "WM8350", .playback = { @@ -1554,15 +1564,7 @@ struct snd_soc_dai wm8350_dai = { .rates = WM8350_RATES, .formats = WM8350_FORMATS, }, - .ops = { - .hw_params = wm8350_pcm_hw_params, - .digital_mute = wm8350_mute, - .trigger = wm8350_pcm_trigger, - .set_fmt = wm8350_set_dai_fmt, - .set_sysclk = wm8350_set_dai_sysclk, - .set_pll = wm8350_set_fll, - .set_clkdiv = wm8350_set_clkdiv, - }, + .ops = &wm8350_dai_ops, }; EXPORT_SYMBOL_GPL(wm8350_dai); diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index f01078cfbd72..cc975a62fa5c 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -554,6 +554,14 @@ static int wm8510_set_bias_level(struct snd_soc_codec *codec, #define WM8510_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops wm8510_dai_ops = { + .hw_params = wm8510_pcm_hw_params, + .digital_mute = wm8510_mute, + .set_fmt = wm8510_set_dai_fmt, + .set_clkdiv = wm8510_set_dai_clkdiv, + .set_pll = wm8510_set_dai_pll, +}; + struct snd_soc_dai wm8510_dai = { .name = "WM8510 HiFi", .playback = { @@ -568,13 +576,7 @@ struct snd_soc_dai wm8510_dai = { .channels_max = 2, .rates = WM8510_RATES, .formats = WM8510_FORMATS,}, - .ops = { - .hw_params = wm8510_pcm_hw_params, - .digital_mute = wm8510_mute, - .set_fmt = wm8510_set_dai_fmt, - .set_clkdiv = wm8510_set_dai_clkdiv, - .set_pll = wm8510_set_dai_pll, - }, + .ops = &wm8510_dai_ops, }; EXPORT_SYMBOL_GPL(wm8510_dai); diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index d3c51ba5e6f9..ee0af23a1acc 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -771,6 +771,21 @@ static int wm8580_set_bias_level(struct snd_soc_codec *codec, #define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops wm8580_dai_ops_playback = { + .hw_params = wm8580_paif_hw_params, + .set_fmt = wm8580_set_paif_dai_fmt, + .set_clkdiv = wm8580_set_dai_clkdiv, + .set_pll = wm8580_set_dai_pll, + .digital_mute = wm8580_digital_mute, +}; + +static struct snd_soc_dai_ops wm8580_dai_ops_capture = { + .hw_params = wm8580_paif_hw_params, + .set_fmt = wm8580_set_paif_dai_fmt, + .set_clkdiv = wm8580_set_dai_clkdiv, + .set_pll = wm8580_set_dai_pll, +}; + struct snd_soc_dai wm8580_dai[] = { { .name = "WM8580 PAIFRX", @@ -782,13 +797,7 @@ struct snd_soc_dai wm8580_dai[] = { .rates = SNDRV_PCM_RATE_8000_192000, .formats = WM8580_FORMATS, }, - .ops = { - .hw_params = wm8580_paif_hw_params, - .set_fmt = wm8580_set_paif_dai_fmt, - .set_clkdiv = wm8580_set_dai_clkdiv, - .set_pll = wm8580_set_dai_pll, - .digital_mute = wm8580_digital_mute, - }, + .ops = &wm8580_dai_ops_playback, }, { .name = "WM8580 PAIFTX", @@ -800,12 +809,7 @@ struct snd_soc_dai wm8580_dai[] = { .rates = SNDRV_PCM_RATE_8000_192000, .formats = WM8580_FORMATS, }, - .ops = { - .hw_params = wm8580_paif_hw_params, - .set_fmt = wm8580_set_paif_dai_fmt, - .set_clkdiv = wm8580_set_dai_clkdiv, - .set_pll = wm8580_set_dai_pll, - }, + .ops = &wm8580_dai_ops_capture, }, }; EXPORT_SYMBOL_GPL(wm8580_dai); diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c index f8363b308895..e7ff2121ede9 100644 --- a/sound/soc/codecs/wm8728.c +++ b/sound/soc/codecs/wm8728.c @@ -244,6 +244,12 @@ static int wm8728_set_bias_level(struct snd_soc_codec *codec, #define WM8728_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) +static struct snd_soc_dai_ops wm8728_dai_ops = { + .hw_params = wm8728_hw_params, + .digital_mute = wm8728_mute, + .set_fmt = wm8728_set_dai_fmt, +}; + struct snd_soc_dai wm8728_dai = { .name = "WM8728", .playback = { @@ -253,11 +259,7 @@ struct snd_soc_dai wm8728_dai = { .rates = WM8728_RATES, .formats = WM8728_FORMATS, }, - .ops = { - .hw_params = wm8728_hw_params, - .digital_mute = wm8728_mute, - .set_fmt = wm8728_set_dai_fmt, - } + .ops = &wm8728_dai_ops, }; EXPORT_SYMBOL_GPL(wm8728_dai); diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 9e7ebcc2c491..e043e3f60008 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -433,6 +433,15 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec, #define WM8731_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) +static struct snd_soc_dai_ops wm8731_dai_ops = { + .prepare = wm8731_pcm_prepare, + .hw_params = wm8731_hw_params, + .shutdown = wm8731_shutdown, + .digital_mute = wm8731_mute, + .set_sysclk = wm8731_set_dai_sysclk, + .set_fmt = wm8731_set_dai_fmt, +}; + struct snd_soc_dai wm8731_dai = { .name = "WM8731", .playback = { @@ -447,14 +456,7 @@ struct snd_soc_dai wm8731_dai = { .channels_max = 2, .rates = WM8731_RATES, .formats = WM8731_FORMATS,}, - .ops = { - .prepare = wm8731_pcm_prepare, - .hw_params = wm8731_hw_params, - .shutdown = wm8731_shutdown, - .digital_mute = wm8731_mute, - .set_sysclk = wm8731_set_dai_sysclk, - .set_fmt = wm8731_set_dai_fmt, - } + .ops = &wm8731_dai_ops, }; EXPORT_SYMBOL_GPL(wm8731_dai); diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 96afb86addc6..b64509b01a49 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -679,6 +679,13 @@ static int wm8750_set_bias_level(struct snd_soc_codec *codec, #define WM8750_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) +static struct snd_soc_dai_ops wm8750_dai_ops = { + .hw_params = wm8750_pcm_hw_params, + .digital_mute = wm8750_mute, + .set_fmt = wm8750_set_dai_fmt, + .set_sysclk = wm8750_set_dai_sysclk, +}; + struct snd_soc_dai wm8750_dai = { .name = "WM8750", .playback = { @@ -693,12 +700,7 @@ struct snd_soc_dai wm8750_dai = { .channels_max = 2, .rates = WM8750_RATES, .formats = WM8750_FORMATS,}, - .ops = { - .hw_params = wm8750_pcm_hw_params, - .digital_mute = wm8750_mute, - .set_fmt = wm8750_set_dai_fmt, - .set_sysclk = wm8750_set_dai_sysclk, - }, + .ops = &wm8750_dai_ops, }; EXPORT_SYMBOL_GPL(wm8750_dai); diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 7f353e935d71..cc6e57f9acf8 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1306,6 +1306,51 @@ static int wm8753_set_bias_level(struct snd_soc_codec *codec, * 3. Voice disabled - HIFI over HIFI * 4. Voice disabled - HIFI over HIFI, uses voice DAI LRC for capture */ +static struct snd_soc_dai_ops wm8753_dai_ops_hifi_mode1 = { + .hw_params = wm8753_i2s_hw_params, + .digital_mute = wm8753_mute, + .set_fmt = wm8753_mode1h_set_dai_fmt, + .set_clkdiv = wm8753_set_dai_clkdiv, + .set_pll = wm8753_set_dai_pll, + .set_sysclk = wm8753_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops wm8753_dai_ops_voice_mode1 = { + .hw_params = wm8753_pcm_hw_params, + .digital_mute = wm8753_mute, + .set_fmt = wm8753_mode1v_set_dai_fmt, + .set_clkdiv = wm8753_set_dai_clkdiv, + .set_pll = wm8753_set_dai_pll, + .set_sysclk = wm8753_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops wm8753_dai_ops_voice_mode2 = { + .hw_params = wm8753_pcm_hw_params, + .digital_mute = wm8753_mute, + .set_fmt = wm8753_mode2_set_dai_fmt, + .set_clkdiv = wm8753_set_dai_clkdiv, + .set_pll = wm8753_set_dai_pll, + .set_sysclk = wm8753_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops wm8753_dai_ops_hifi_mode3 = { + .hw_params = wm8753_i2s_hw_params, + .digital_mute = wm8753_mute, + .set_fmt = wm8753_mode3_4_set_dai_fmt, + .set_clkdiv = wm8753_set_dai_clkdiv, + .set_pll = wm8753_set_dai_pll, + .set_sysclk = wm8753_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops wm8753_dai_ops_hifi_mode4 = { + .hw_params = wm8753_i2s_hw_params, + .digital_mute = wm8753_mute, + .set_fmt = wm8753_mode3_4_set_dai_fmt, + .set_clkdiv = wm8753_set_dai_clkdiv, + .set_pll = wm8753_set_dai_pll, + .set_sysclk = wm8753_set_dai_sysclk, +}; + static const struct snd_soc_dai wm8753_all_dai[] = { /* DAI HiFi mode 1 */ { .name = "WM8753 HiFi", @@ -1322,14 +1367,7 @@ static const struct snd_soc_dai wm8753_all_dai[] = { .channels_max = 2, .rates = WM8753_RATES, .formats = WM8753_FORMATS}, - .ops = { - .hw_params = wm8753_i2s_hw_params, - .digital_mute = wm8753_mute, - .set_fmt = wm8753_mode1h_set_dai_fmt, - .set_clkdiv = wm8753_set_dai_clkdiv, - .set_pll = wm8753_set_dai_pll, - .set_sysclk = wm8753_set_dai_sysclk, - }, + .ops = &wm8753_dai_ops_hifi_mode1, }, /* DAI Voice mode 1 */ { .name = "WM8753 Voice", @@ -1346,14 +1384,7 @@ static const struct snd_soc_dai wm8753_all_dai[] = { .channels_max = 2, .rates = WM8753_RATES, .formats = WM8753_FORMATS,}, - .ops = { - .hw_params = wm8753_pcm_hw_params, - .digital_mute = wm8753_mute, - .set_fmt = wm8753_mode1v_set_dai_fmt, - .set_clkdiv = wm8753_set_dai_clkdiv, - .set_pll = wm8753_set_dai_pll, - .set_sysclk = wm8753_set_dai_sysclk, - }, + .ops = &wm8753_dai_ops_voice_mode1, }, /* DAI HiFi mode 2 - dummy */ { .name = "WM8753 HiFi", @@ -1374,14 +1405,7 @@ static const struct snd_soc_dai wm8753_all_dai[] = { .channels_max = 2, .rates = WM8753_RATES, .formats = WM8753_FORMATS,}, - .ops = { - .hw_params = wm8753_pcm_hw_params, - .digital_mute = wm8753_mute, - .set_fmt = wm8753_mode2_set_dai_fmt, - .set_clkdiv = wm8753_set_dai_clkdiv, - .set_pll = wm8753_set_dai_pll, - .set_sysclk = wm8753_set_dai_sysclk, - }, + .ops = &wm8753_dai_ops_voice_mode2, }, /* DAI HiFi mode 3 */ { .name = "WM8753 HiFi", @@ -1398,14 +1422,7 @@ static const struct snd_soc_dai wm8753_all_dai[] = { .channels_max = 2, .rates = WM8753_RATES, .formats = WM8753_FORMATS,}, - .ops = { - .hw_params = wm8753_i2s_hw_params, - .digital_mute = wm8753_mute, - .set_fmt = wm8753_mode3_4_set_dai_fmt, - .set_clkdiv = wm8753_set_dai_clkdiv, - .set_pll = wm8753_set_dai_pll, - .set_sysclk = wm8753_set_dai_sysclk, - }, + .ops = &wm8753_dai_ops_hifi_mode3, }, /* DAI Voice mode 3 - dummy */ { .name = "WM8753 Voice", @@ -1426,14 +1443,7 @@ static const struct snd_soc_dai wm8753_all_dai[] = { .channels_max = 2, .rates = WM8753_RATES, .formats = WM8753_FORMATS,}, - .ops = { - .hw_params = wm8753_i2s_hw_params, - .digital_mute = wm8753_mute, - .set_fmt = wm8753_mode3_4_set_dai_fmt, - .set_clkdiv = wm8753_set_dai_clkdiv, - .set_pll = wm8753_set_dai_pll, - .set_sysclk = wm8753_set_dai_sysclk, - }, + .ops = &wm8753_dai_ops_hifi_mode4, }, /* DAI Voice mode 4 - dummy */ { .name = "WM8753 Voice", diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index da5ca64f89bb..46c5ea1ff921 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -1088,6 +1088,14 @@ static int wm8900_digital_mute(struct snd_soc_dai *codec_dai, int mute) (SNDRV_PCM_FORMAT_S16_LE | SNDRV_PCM_FORMAT_S20_3LE | \ SNDRV_PCM_FORMAT_S24_LE) +static struct snd_soc_dai_ops wm8900_dai_ops = { + .hw_params = wm8900_hw_params, + .set_clkdiv = wm8900_set_dai_clkdiv, + .set_pll = wm8900_set_dai_pll, + .set_fmt = wm8900_set_dai_fmt, + .digital_mute = wm8900_digital_mute, +}; + struct snd_soc_dai wm8900_dai = { .name = "WM8900 HiFi", .playback = { @@ -1104,13 +1112,7 @@ struct snd_soc_dai wm8900_dai = { .rates = WM8900_RATES, .formats = WM8900_PCM_FORMATS, }, - .ops = { - .hw_params = wm8900_hw_params, - .set_clkdiv = wm8900_set_dai_clkdiv, - .set_pll = wm8900_set_dai_pll, - .set_fmt = wm8900_set_dai_fmt, - .digital_mute = wm8900_digital_mute, - }, + .ops = &wm8900_dai_ops, }; EXPORT_SYMBOL_GPL(wm8900_dai); diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index c6fa8a71b4dd..8cf571f1a803 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -1497,6 +1497,15 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) +static struct snd_soc_dai_ops wm8903_dai_ops = { + .startup = wm8903_startup, + .shutdown = wm8903_shutdown, + .hw_params = wm8903_hw_params, + .digital_mute = wm8903_digital_mute, + .set_fmt = wm8903_set_dai_fmt, + .set_sysclk = wm8903_set_dai_sysclk, +}; + struct snd_soc_dai wm8903_dai = { .name = "WM8903", .playback = { @@ -1513,14 +1522,7 @@ struct snd_soc_dai wm8903_dai = { .rates = WM8903_CAPTURE_RATES, .formats = WM8903_FORMATS, }, - .ops = { - .startup = wm8903_startup, - .shutdown = wm8903_shutdown, - .hw_params = wm8903_hw_params, - .digital_mute = wm8903_digital_mute, - .set_fmt = wm8903_set_dai_fmt, - .set_sysclk = wm8903_set_dai_sysclk - } + .ops = &wm8903_dai_ops, }; EXPORT_SYMBOL_GPL(wm8903_dai); diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c index 24d4c905a011..032dca22dbd3 100644 --- a/sound/soc/codecs/wm8971.c +++ b/sound/soc/codecs/wm8971.c @@ -604,6 +604,13 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec, #define WM8971_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ SNDRV_PCM_FMTBIT_S24_LE) +static struct snd_soc_dai_ops wm8971_dai_ops = { + .hw_params = wm8971_pcm_hw_params, + .digital_mute = wm8971_mute, + .set_fmt = wm8971_set_dai_fmt, + .set_sysclk = wm8971_set_dai_sysclk, +}; + struct snd_soc_dai wm8971_dai = { .name = "WM8971", .playback = { @@ -618,12 +625,7 @@ struct snd_soc_dai wm8971_dai = { .channels_max = 2, .rates = WM8971_RATES, .formats = WM8971_FORMATS,}, - .ops = { - .hw_params = wm8971_pcm_hw_params, - .digital_mute = wm8971_mute, - .set_fmt = wm8971_set_dai_fmt, - .set_sysclk = wm8971_set_dai_sysclk, - }, + .ops = &wm8971_dai_ops, }; EXPORT_SYMBOL_GPL(wm8971_dai); diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 1a38421f7594..c518c3e5aa3f 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1332,6 +1332,15 @@ static int wm8990_set_bias_level(struct snd_soc_codec *codec, * 1. ADC/DAC on Primary Interface * 2. ADC on Primary Interface/DAC on secondary */ +static struct snd_soc_dai_ops wm8990_dai_ops = { + .hw_params = wm8990_hw_params, + .digital_mute = wm8990_mute, + .set_fmt = wm8990_set_dai_fmt, + .set_clkdiv = wm8990_set_dai_clkdiv, + .set_pll = wm8990_set_dai_pll, + .set_sysclk = wm8990_set_dai_sysclk, +}; + struct snd_soc_dai wm8990_dai = { /* ADC/DAC on primary */ .name = "WM8990 ADC/DAC Primary", @@ -1348,14 +1357,7 @@ struct snd_soc_dai wm8990_dai = { .channels_max = 2, .rates = WM8990_RATES, .formats = WM8990_FORMATS,}, - .ops = { - .hw_params = wm8990_hw_params, - .digital_mute = wm8990_mute, - .set_fmt = wm8990_set_dai_fmt, - .set_clkdiv = wm8990_set_dai_clkdiv, - .set_pll = wm8990_set_dai_pll, - .set_sysclk = wm8990_set_dai_sysclk, - }, + .ops = &wm8990_dai_ops, }; EXPORT_SYMBOL_GPL(wm8990_dai); diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index 2e9e06b2daaf..3265817c5c26 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -269,6 +269,10 @@ static int ac97_prepare(struct snd_pcm_substream *substream, SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops wm9705_dai_ops = { + .prepare = ac97_prepare, +}; + struct snd_soc_dai wm9705_dai[] = { { .name = "AC97 HiFi", @@ -287,9 +291,7 @@ struct snd_soc_dai wm9705_dai[] = { .rates = WM9705_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE, }, - .ops = { - .prepare = ac97_prepare, - }, + .ops = &wm9705_dai_ops, }, { .name = "AC97 Aux", diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index b3a8be77676e..765cf1e7369e 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -517,6 +517,14 @@ static int ac97_aux_prepare(struct snd_pcm_substream *substream, SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 |\ SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops wm9712_dai_ops_hifi = { + .prepare = ac97_prepare, +}; + +static struct snd_soc_dai_ops wm9712_dai_ops_aux = { + .prepare = ac97_aux_prepare, +}; + struct snd_soc_dai wm9712_dai[] = { { .name = "AC97 HiFi", @@ -533,8 +541,7 @@ struct snd_soc_dai wm9712_dai[] = { .channels_max = 2, .rates = WM9712_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .prepare = ac97_prepare,}, + .ops = &wm9712_dai_ops_hifi, }, { .name = "AC97 Aux", @@ -544,8 +551,7 @@ struct snd_soc_dai wm9712_dai[] = { .channels_max = 1, .rates = WM9712_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .prepare = ac97_aux_prepare,}, + .ops = &wm9712_dai_ops_aux, } }; EXPORT_SYMBOL_GPL(wm9712_dai); diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index a93aea5c1878..523bad077fa0 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -1005,6 +1005,27 @@ static int ac97_aux_prepare(struct snd_pcm_substream *substream, (SNDRV_PCM_FORMAT_S16_LE | SNDRV_PCM_FORMAT_S20_3LE | \ SNDRV_PCM_FORMAT_S24_LE) +static struct snd_soc_dai_ops wm9713_dai_ops_hifi = { + .prepare = ac97_hifi_prepare, + .set_clkdiv = wm9713_set_dai_clkdiv, + .set_pll = wm9713_set_dai_pll, +}; + +static struct snd_soc_dai_ops wm9713_dai_ops_aux = { + .prepare = ac97_aux_prepare, + .set_clkdiv = wm9713_set_dai_clkdiv, + .set_pll = wm9713_set_dai_pll, +}; + +static struct snd_soc_dai_ops wm9713_dai_ops_voice = { + .hw_params = wm9713_pcm_hw_params, + .shutdown = wm9713_voiceshutdown, + .set_clkdiv = wm9713_set_dai_clkdiv, + .set_pll = wm9713_set_dai_pll, + .set_fmt = wm9713_set_dai_fmt, + .set_tristate = wm9713_set_dai_tristate, +}; + struct snd_soc_dai wm9713_dai[] = { { .name = "AC97 HiFi", @@ -1021,10 +1042,7 @@ struct snd_soc_dai wm9713_dai[] = { .channels_max = 2, .rates = WM9713_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .prepare = ac97_hifi_prepare, - .set_clkdiv = wm9713_set_dai_clkdiv, - .set_pll = wm9713_set_dai_pll,}, + .ops = &wm9713_dai_ops_hifi, }, { .name = "AC97 Aux", @@ -1034,10 +1052,7 @@ struct snd_soc_dai wm9713_dai[] = { .channels_max = 1, .rates = WM9713_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .prepare = ac97_aux_prepare, - .set_clkdiv = wm9713_set_dai_clkdiv, - .set_pll = wm9713_set_dai_pll,}, + .ops = &wm9713_dai_ops_aux, }, { .name = "WM9713 Voice", @@ -1053,14 +1068,7 @@ struct snd_soc_dai wm9713_dai[] = { .channels_max = 2, .rates = WM9713_PCM_RATES, .formats = WM9713_PCM_FORMATS,}, - .ops = { - .hw_params = wm9713_pcm_hw_params, - .shutdown = wm9713_voiceshutdown, - .set_clkdiv = wm9713_set_dai_clkdiv, - .set_pll = wm9713_set_dai_pll, - .set_fmt = wm9713_set_dai_fmt, - .set_tristate = wm9713_set_dai_tristate, - }, + .ops = &wm9713_dai_ops_voice, }, }; EXPORT_SYMBOL_GPL(wm9713_dai); diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index 0fee779e3c76..ffdb9439d3d8 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -499,6 +499,13 @@ static void davinci_i2s_remove(struct platform_device *pdev, #define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000 +static struct snd_soc_dai_ops davinci_i2s_dai_ops = { + .startup = davinci_i2s_startup, + .trigger = davinci_i2s_trigger, + .hw_params = davinci_i2s_hw_params, + .set_fmt = davinci_i2s_set_dai_fmt, +}; + struct snd_soc_dai davinci_i2s_dai = { .name = "davinci-i2s", .id = 0, @@ -514,12 +521,7 @@ struct snd_soc_dai davinci_i2s_dai = { .channels_max = 2, .rates = DAVINCI_I2S_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .startup = davinci_i2s_startup, - .trigger = davinci_i2s_trigger, - .hw_params = davinci_i2s_hw_params, - .set_fmt = davinci_i2s_set_dai_fmt, - }, + .ops = &davinci_i2s_dai_ops, }; EXPORT_SYMBOL_GPL(davinci_i2s_dai); diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 6844009833db..0fddd437a7c9 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -562,6 +562,15 @@ static int fsl_ssi_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) /** * fsl_ssi_dai_template: template CPU DAI for the SSI */ +static struct snd_soc_dai_ops fsl_ssi_dai_ops = { + .startup = fsl_ssi_startup, + .hw_params = fsl_ssi_hw_params, + .shutdown = fsl_ssi_shutdown, + .trigger = fsl_ssi_trigger, + .set_sysclk = fsl_ssi_set_sysclk, + .set_fmt = fsl_ssi_set_fmt, +}; + static struct snd_soc_dai fsl_ssi_dai_template = { .playback = { /* The SSI does not support monaural audio. */ @@ -576,14 +585,7 @@ static struct snd_soc_dai fsl_ssi_dai_template = { .rates = FSLSSI_I2S_RATES, .formats = FSLSSI_I2S_FORMATS, }, - .ops = { - .startup = fsl_ssi_startup, - .hw_params = fsl_ssi_hw_params, - .shutdown = fsl_ssi_shutdown, - .trigger = fsl_ssi_trigger, - .set_sysclk = fsl_ssi_set_sysclk, - .set_fmt = fsl_ssi_set_fmt, - }, + .ops = &fsl_ssi_dai_ops, }; /** diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 9eb1ce185bd0..3aa729df27b5 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -468,6 +468,16 @@ static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) /** * psc_i2s_dai_template: template CPU Digital Audio Interface */ +static struct snd_soc_dai_ops psc_i2s_dai_ops = { + .startup = psc_i2s_startup, + .hw_params = psc_i2s_hw_params, + .hw_free = psc_i2s_hw_free, + .shutdown = psc_i2s_shutdown, + .trigger = psc_i2s_trigger, + .set_sysclk = psc_i2s_set_sysclk, + .set_fmt = psc_i2s_set_fmt, +}; + static struct snd_soc_dai psc_i2s_dai_template = { .playback = { .channels_min = 2, @@ -481,15 +491,7 @@ static struct snd_soc_dai psc_i2s_dai_template = { .rates = PSC_I2S_RATES, .formats = PSC_I2S_FORMATS, }, - .ops = { - .startup = psc_i2s_startup, - .hw_params = psc_i2s_hw_params, - .hw_free = psc_i2s_hw_free, - .shutdown = psc_i2s_shutdown, - .trigger = psc_i2s_trigger, - .set_sysclk = psc_i2s_set_sysclk, - .set_fmt = psc_i2s_set_fmt, - }, + .ops = &psc_i2s_dai_ops, }; /* --------------------------------------------------------------------- diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 05dd5abcddf4..d6882be33452 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -461,6 +461,16 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, return err; } +static struct snd_soc_dai_ops omap_mcbsp_dai_ops = { + .startup = omap_mcbsp_dai_startup, + .shutdown = omap_mcbsp_dai_shutdown, + .trigger = omap_mcbsp_dai_trigger, + .hw_params = omap_mcbsp_dai_hw_params, + .set_fmt = omap_mcbsp_dai_set_dai_fmt, + .set_clkdiv = omap_mcbsp_dai_set_clkdiv, + .set_sysclk = omap_mcbsp_dai_set_dai_sysclk, +}; + #define OMAP_MCBSP_DAI_BUILDER(link_id) \ { \ .name = "omap-mcbsp-dai-"#link_id, \ @@ -477,15 +487,7 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, .rates = OMAP_MCBSP_RATES, \ .formats = SNDRV_PCM_FMTBIT_S16_LE, \ }, \ - .ops = { \ - .startup = omap_mcbsp_dai_startup, \ - .shutdown = omap_mcbsp_dai_shutdown, \ - .trigger = omap_mcbsp_dai_trigger, \ - .hw_params = omap_mcbsp_dai_hw_params, \ - .set_fmt = omap_mcbsp_dai_set_dai_fmt, \ - .set_clkdiv = omap_mcbsp_dai_set_clkdiv, \ - .set_sysclk = omap_mcbsp_dai_set_dai_sysclk, \ - }, \ + .ops = &omap_mcbsp_dai_ops, \ .private_data = &mcbsp_data[(link_id)].bus_id, \ } diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 4a973ab710be..3e18064e86b2 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -784,6 +784,19 @@ static void pxa_ssp_remove(struct platform_device *pdev, SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +static struct snd_soc_dai_ops pxa_ssp_dai_ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_clkdiv = pxa_ssp_set_dai_clkdiv, + .set_pll = pxa_ssp_set_dai_pll, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, +}; + struct snd_soc_dai pxa_ssp_dai[] = { { .name = "pxa2xx-ssp1", @@ -804,18 +817,7 @@ struct snd_soc_dai pxa_ssp_dai[] = { .rates = PXA_SSP_RATES, .formats = PXA_SSP_FORMATS, }, - .ops = { - .startup = pxa_ssp_startup, - .shutdown = pxa_ssp_shutdown, - .trigger = pxa_ssp_trigger, - .hw_params = pxa_ssp_hw_params, - .set_sysclk = pxa_ssp_set_dai_sysclk, - .set_clkdiv = pxa_ssp_set_dai_clkdiv, - .set_pll = pxa_ssp_set_dai_pll, - .set_fmt = pxa_ssp_set_dai_fmt, - .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, - .set_tristate = pxa_ssp_set_dai_tristate, - }, + .ops = &pxa_ssp_dai_ops, }, { .name = "pxa2xx-ssp2", .id = 1, @@ -835,18 +837,7 @@ struct snd_soc_dai pxa_ssp_dai[] = { .rates = PXA_SSP_RATES, .formats = PXA_SSP_FORMATS, }, - .ops = { - .startup = pxa_ssp_startup, - .shutdown = pxa_ssp_shutdown, - .trigger = pxa_ssp_trigger, - .hw_params = pxa_ssp_hw_params, - .set_sysclk = pxa_ssp_set_dai_sysclk, - .set_clkdiv = pxa_ssp_set_dai_clkdiv, - .set_pll = pxa_ssp_set_dai_pll, - .set_fmt = pxa_ssp_set_dai_fmt, - .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, - .set_tristate = pxa_ssp_set_dai_tristate, - }, + .ops = &pxa_ssp_dai_ops, }, { .name = "pxa2xx-ssp3", @@ -867,18 +858,7 @@ struct snd_soc_dai pxa_ssp_dai[] = { .rates = PXA_SSP_RATES, .formats = PXA_SSP_FORMATS, }, - .ops = { - .startup = pxa_ssp_startup, - .shutdown = pxa_ssp_shutdown, - .trigger = pxa_ssp_trigger, - .hw_params = pxa_ssp_hw_params, - .set_sysclk = pxa_ssp_set_dai_sysclk, - .set_clkdiv = pxa_ssp_set_dai_clkdiv, - .set_pll = pxa_ssp_set_dai_pll, - .set_fmt = pxa_ssp_set_dai_fmt, - .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, - .set_tristate = pxa_ssp_set_dai_tristate, - }, + .ops = &pxa_ssp_dai_ops, }, { .name = "pxa2xx-ssp4", @@ -899,18 +879,7 @@ struct snd_soc_dai pxa_ssp_dai[] = { .rates = PXA_SSP_RATES, .formats = PXA_SSP_FORMATS, }, - .ops = { - .startup = pxa_ssp_startup, - .shutdown = pxa_ssp_shutdown, - .trigger = pxa_ssp_trigger, - .hw_params = pxa_ssp_hw_params, - .set_sysclk = pxa_ssp_set_dai_sysclk, - .set_clkdiv = pxa_ssp_set_dai_clkdiv, - .set_pll = pxa_ssp_set_dai_pll, - .set_fmt = pxa_ssp_set_dai_fmt, - .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, - .set_tristate = pxa_ssp_set_dai_tristate, - }, + .ops = &pxa_ssp_dai_ops, }, }; EXPORT_SYMBOL_GPL(pxa_ssp_dai); diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 812c2b4d3e07..11cd0f289c16 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -164,6 +164,10 @@ static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream, SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops pxa_ac97_dai_ops = { + .hw_params = pxa2xx_ac97_hw_params, +}; + /* * There is only 1 physical AC97 interface for pxa2xx, but it * has extra fifo's that can be used for aux DACs and ADCs. @@ -189,8 +193,7 @@ struct snd_soc_dai pxa_ac97_dai[] = { .channels_max = 2, .rates = PXA2XX_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = pxa2xx_ac97_hw_params,}, + .ops = &pxa_ac97_dai_ops, }, { .name = "pxa2xx-ac97-aux", @@ -208,8 +211,7 @@ struct snd_soc_dai pxa_ac97_dai[] = { .channels_max = 1, .rates = PXA2XX_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = pxa2xx_ac97_hw_aux_params,}, + .ops = &pxa_ac97_dai_ops, }, { .name = "pxa2xx-ac97-mic", @@ -221,8 +223,7 @@ struct snd_soc_dai pxa_ac97_dai[] = { .channels_max = 1, .rates = PXA2XX_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = pxa2xx_ac97_hw_mic_params,}, + .ops = &pxa_ac97_dai_ops, }, }; diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 83b59d7fe96e..e6c24408c5f9 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -304,6 +304,15 @@ static int pxa2xx_i2s_resume(struct snd_soc_dai *dai) SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000) +static struct snd_soc_dai_ops pxa_i2s_dai_ops = { + .startup = pxa2xx_i2s_startup, + .shutdown = pxa2xx_i2s_shutdown, + .trigger = pxa2xx_i2s_trigger, + .hw_params = pxa2xx_i2s_hw_params, + .set_fmt = pxa2xx_i2s_set_dai_fmt, + .set_sysclk = pxa2xx_i2s_set_dai_sysclk, +}; + struct snd_soc_dai pxa_i2s_dai = { .name = "pxa2xx-i2s", .id = 0, @@ -319,14 +328,7 @@ struct snd_soc_dai pxa_i2s_dai = { .channels_max = 2, .rates = PXA2XX_I2S_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .startup = pxa2xx_i2s_startup, - .shutdown = pxa2xx_i2s_shutdown, - .trigger = pxa2xx_i2s_trigger, - .hw_params = pxa2xx_i2s_hw_params, - .set_fmt = pxa2xx_i2s_set_dai_fmt, - .set_sysclk = pxa2xx_i2s_set_dai_sysclk, - }, + .ops = &pxa_i2s_dai_ops, }; EXPORT_SYMBOL_GPL(pxa_i2s_dai); diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index f3fc0aba0aaf..382d7eee53ef 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -708,6 +708,14 @@ static int s3c2412_i2s_resume(struct snd_soc_dai *dai) SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) +static struct snd_soc_dai_ops s3c2412_i2s_dai_ops = { + .trigger = s3c2412_i2s_trigger, + .hw_params = s3c2412_i2s_hw_params, + .set_fmt = s3c2412_i2s_set_fmt, + .set_clkdiv = s3c2412_i2s_set_clkdiv, + .set_sysclk = s3c2412_i2s_set_sysclk, +}; + struct snd_soc_dai s3c2412_i2s_dai = { .name = "s3c2412-i2s", .id = 0, @@ -726,13 +734,7 @@ struct snd_soc_dai s3c2412_i2s_dai = { .rates = S3C2412_I2S_RATES, .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, }, - .ops = { - .trigger = s3c2412_i2s_trigger, - .hw_params = s3c2412_i2s_hw_params, - .set_fmt = s3c2412_i2s_set_fmt, - .set_clkdiv = s3c2412_i2s_set_clkdiv, - .set_sysclk = s3c2412_i2s_set_sysclk, - }, + .ops = &s3c2412_i2s_dai_ops, }; EXPORT_SYMBOL_GPL(s3c2412_i2s_dai); diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c index 5822d2dd49ba..83ea623234e7 100644 --- a/sound/soc/s3c24xx/s3c2443-ac97.c +++ b/sound/soc/s3c24xx/s3c2443-ac97.c @@ -355,6 +355,11 @@ static int s3c2443_ac97_mic_trigger(struct snd_pcm_substream *substream, SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) +static struct snd_soc_dai_ops s3c2443_ac97_dai_ops = { + .hw_params = s3c2443_ac97_hw_params, + .trigger = s3c2443_ac97_trigger, +}; + struct snd_soc_dai s3c2443_ac97_dai[] = { { .name = "s3c2443-ac97", @@ -374,9 +379,7 @@ struct snd_soc_dai s3c2443_ac97_dai[] = { .channels_max = 2, .rates = s3c2443_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = s3c2443_ac97_hw_params, - .trigger = s3c2443_ac97_trigger}, + .ops = &s3c2443_ac97_dai_ops, }, { .name = "pxa2xx-ac97-mic", @@ -388,9 +391,7 @@ struct snd_soc_dai s3c2443_ac97_dai[] = { .channels_max = 1, .rates = s3c2443_AC97_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .hw_params = s3c2443_ac97_hw_mic_params, - .trigger = s3c2443_ac97_mic_trigger,}, + .ops = &s3c2443_ac97_dai_ops, }, }; EXPORT_SYMBOL_GPL(s3c2443_ac97_dai); diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index 1c2b05497107..4473fb584c4c 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -456,6 +456,14 @@ static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) +static struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = { + .trigger = s3c24xx_i2s_trigger, + .hw_params = s3c24xx_i2s_hw_params, + .set_fmt = s3c24xx_i2s_set_fmt, + .set_clkdiv = s3c24xx_i2s_set_clkdiv, + .set_sysclk = s3c24xx_i2s_set_sysclk, +}; + struct snd_soc_dai s3c24xx_i2s_dai = { .name = "s3c24xx-i2s", .id = 0, @@ -472,13 +480,7 @@ struct snd_soc_dai s3c24xx_i2s_dai = { .channels_max = 2, .rates = S3C24XX_I2S_RATES, .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = { - .trigger = s3c24xx_i2s_trigger, - .hw_params = s3c24xx_i2s_hw_params, - .set_fmt = s3c24xx_i2s_set_fmt, - .set_clkdiv = s3c24xx_i2s_set_clkdiv, - .set_sysclk = s3c24xx_i2s_set_sysclk, - }, + .ops = &s3c24xx_i2s_dai_ops, }; EXPORT_SYMBOL_GPL(s3c24xx_i2s_dai); diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c index d1e5390fddeb..56fa0872abbb 100644 --- a/sound/soc/sh/ssi.c +++ b/sound/soc/sh/ssi.c @@ -336,6 +336,16 @@ static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \ SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE) +static struct snd_soc_dai_ops ssi_dai_ops = { + .startup = ssi_startup, + .shutdown = ssi_shutdown, + .trigger = ssi_trigger, + .hw_params = ssi_hw_params, + .set_sysclk = ssi_set_sysclk, + .set_clkdiv = ssi_set_clkdiv, + .set_fmt = ssi_set_fmt, +}; + struct snd_soc_dai sh4_ssi_dai[] = { { .name = "SSI0", @@ -352,15 +362,7 @@ struct snd_soc_dai sh4_ssi_dai[] = { .channels_min = 2, .channels_max = 8, }, - .ops = { - .startup = ssi_startup, - .shutdown = ssi_shutdown, - .trigger = ssi_trigger, - .hw_params = ssi_hw_params, - .set_sysclk = ssi_set_sysclk, - .set_clkdiv = ssi_set_clkdiv, - .set_fmt = ssi_set_fmt, - }, + .ops = &ssi_dai_ops, }, #ifdef CONFIG_CPU_SUBTYPE_SH7760 { @@ -378,15 +380,7 @@ struct snd_soc_dai sh4_ssi_dai[] = { .channels_min = 2, .channels_max = 8, }, - .ops = { - .startup = ssi_startup, - .shutdown = ssi_shutdown, - .trigger = ssi_trigger, - .hw_params = ssi_hw_params, - .set_sysclk = ssi_set_sysclk, - .set_clkdiv = ssi_set_clkdiv, - .set_fmt = ssi_set_fmt, - }, + .ops = &ssi_dai_ops, }, #endif }; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index d4b90d82a098..16518329f6b2 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -133,8 +133,8 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) mutex_lock(&pcm_mutex); /* startup the audio subsystem */ - if (cpu_dai->ops.startup) { - ret = cpu_dai->ops.startup(substream, cpu_dai); + if (cpu_dai->ops->startup) { + ret = cpu_dai->ops->startup(substream, cpu_dai); if (ret < 0) { printk(KERN_ERR "asoc: can't open interface %s\n", cpu_dai->name); @@ -150,8 +150,8 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) } } - if (codec_dai->ops.startup) { - ret = codec_dai->ops.startup(substream, codec_dai); + if (codec_dai->ops->startup) { + ret = codec_dai->ops->startup(substream, codec_dai); if (ret < 0) { printk(KERN_ERR "asoc: can't open codec %s\n", codec_dai->name); @@ -247,8 +247,8 @@ codec_dai_err: platform->pcm_ops->close(substream); platform_err: - if (cpu_dai->ops.shutdown) - cpu_dai->ops.shutdown(substream, cpu_dai); + if (cpu_dai->ops->shutdown) + cpu_dai->ops->shutdown(substream, cpu_dai); out: mutex_unlock(&pcm_mutex); return ret; @@ -340,11 +340,11 @@ static int soc_codec_close(struct snd_pcm_substream *substream) if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) snd_soc_dai_digital_mute(codec_dai, 1); - if (cpu_dai->ops.shutdown) - cpu_dai->ops.shutdown(substream, cpu_dai); + if (cpu_dai->ops->shutdown) + cpu_dai->ops->shutdown(substream, cpu_dai); - if (codec_dai->ops.shutdown) - codec_dai->ops.shutdown(substream, codec_dai); + if (codec_dai->ops->shutdown) + codec_dai->ops->shutdown(substream, codec_dai); if (machine->ops && machine->ops->shutdown) machine->ops->shutdown(substream); @@ -408,16 +408,16 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) } } - if (codec_dai->ops.prepare) { - ret = codec_dai->ops.prepare(substream, codec_dai); + if (codec_dai->ops->prepare) { + ret = codec_dai->ops->prepare(substream, codec_dai); if (ret < 0) { printk(KERN_ERR "asoc: codec DAI prepare error\n"); goto out; } } - if (cpu_dai->ops.prepare) { - ret = cpu_dai->ops.prepare(substream, cpu_dai); + if (cpu_dai->ops->prepare) { + ret = cpu_dai->ops->prepare(substream, cpu_dai); if (ret < 0) { printk(KERN_ERR "asoc: cpu DAI prepare error\n"); goto out; @@ -494,8 +494,8 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, } } - if (codec_dai->ops.hw_params) { - ret = codec_dai->ops.hw_params(substream, params, codec_dai); + if (codec_dai->ops->hw_params) { + ret = codec_dai->ops->hw_params(substream, params, codec_dai); if (ret < 0) { printk(KERN_ERR "asoc: can't set codec %s hw params\n", codec_dai->name); @@ -503,8 +503,8 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, } } - if (cpu_dai->ops.hw_params) { - ret = cpu_dai->ops.hw_params(substream, params, cpu_dai); + if (cpu_dai->ops->hw_params) { + ret = cpu_dai->ops->hw_params(substream, params, cpu_dai); if (ret < 0) { printk(KERN_ERR "asoc: interface %s hw params failed\n", cpu_dai->name); @@ -526,12 +526,12 @@ out: return ret; platform_err: - if (cpu_dai->ops.hw_free) - cpu_dai->ops.hw_free(substream, cpu_dai); + if (cpu_dai->ops->hw_free) + cpu_dai->ops->hw_free(substream, cpu_dai); interface_err: - if (codec_dai->ops.hw_free) - codec_dai->ops.hw_free(substream, codec_dai); + if (codec_dai->ops->hw_free) + codec_dai->ops->hw_free(substream, codec_dai); codec_err: if (machine->ops && machine->ops->hw_free) @@ -570,11 +570,11 @@ static int soc_pcm_hw_free(struct snd_pcm_substream *substream) platform->pcm_ops->hw_free(substream); /* now free hw params for the DAI's */ - if (codec_dai->ops.hw_free) - codec_dai->ops.hw_free(substream, codec_dai); + if (codec_dai->ops->hw_free) + codec_dai->ops->hw_free(substream, codec_dai); - if (cpu_dai->ops.hw_free) - cpu_dai->ops.hw_free(substream, cpu_dai); + if (cpu_dai->ops->hw_free) + cpu_dai->ops->hw_free(substream, cpu_dai); mutex_unlock(&pcm_mutex); return 0; @@ -591,8 +591,8 @@ static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd) struct snd_soc_dai *codec_dai = machine->codec_dai; int ret; - if (codec_dai->ops.trigger) { - ret = codec_dai->ops.trigger(substream, cmd, codec_dai); + if (codec_dai->ops->trigger) { + ret = codec_dai->ops->trigger(substream, cmd, codec_dai); if (ret < 0) return ret; } @@ -603,8 +603,8 @@ static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd) return ret; } - if (cpu_dai->ops.trigger) { - ret = cpu_dai->ops.trigger(substream, cmd, cpu_dai); + if (cpu_dai->ops->trigger) { + ret = cpu_dai->ops->trigger(substream, cmd, cpu_dai); if (ret < 0) return ret; } @@ -645,8 +645,8 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) /* mute any active DAC's */ for (i = 0; i < card->num_links; i++) { struct snd_soc_dai *dai = card->dai_link[i].codec_dai; - if (dai->ops.digital_mute && dai->playback.active) - dai->ops.digital_mute(dai, 1); + if (dai->ops->digital_mute && dai->playback.active) + dai->ops->digital_mute(dai, 1); } /* suspend all pcms */ @@ -741,8 +741,8 @@ static void soc_resume_deferred(struct work_struct *work) /* unmute any active DACs */ for (i = 0; i < card->num_links; i++) { struct snd_soc_dai *dai = card->dai_link[i].codec_dai; - if (dai->ops.digital_mute && dai->playback.active) - dai->ops.digital_mute(dai, 0); + if (dai->ops->digital_mute && dai->playback.active) + dai->ops->digital_mute(dai, 0); } for (i = 0; i < card->num_links; i++) { @@ -2051,8 +2051,8 @@ EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8); int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { - if (dai->ops.set_sysclk) - return dai->ops.set_sysclk(dai, clk_id, freq, dir); + if (dai->ops->set_sysclk) + return dai->ops->set_sysclk(dai, clk_id, freq, dir); else return -EINVAL; } @@ -2071,8 +2071,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_sysclk); int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) { - if (dai->ops.set_clkdiv) - return dai->ops.set_clkdiv(dai, div_id, div); + if (dai->ops->set_clkdiv) + return dai->ops->set_clkdiv(dai, div_id, div); else return -EINVAL; } @@ -2090,8 +2090,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_clkdiv); int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, unsigned int freq_in, unsigned int freq_out) { - if (dai->ops.set_pll) - return dai->ops.set_pll(dai, pll_id, freq_in, freq_out); + if (dai->ops->set_pll) + return dai->ops->set_pll(dai, pll_id, freq_in, freq_out); else return -EINVAL; } @@ -2106,8 +2106,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_pll); */ int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { - if (dai->ops.set_fmt) - return dai->ops.set_fmt(dai, fmt); + if (dai->ops->set_fmt) + return dai->ops->set_fmt(dai, fmt); else return -EINVAL; } @@ -2125,8 +2125,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_fmt); int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int mask, int slots) { - if (dai->ops.set_sysclk) - return dai->ops.set_tdm_slot(dai, mask, slots); + if (dai->ops->set_sysclk) + return dai->ops->set_tdm_slot(dai, mask, slots); else return -EINVAL; } @@ -2141,8 +2141,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot); */ int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate) { - if (dai->ops.set_sysclk) - return dai->ops.set_tristate(dai, tristate); + if (dai->ops->set_sysclk) + return dai->ops->set_tristate(dai, tristate); else return -EINVAL; } @@ -2157,8 +2157,8 @@ EXPORT_SYMBOL_GPL(snd_soc_dai_set_tristate); */ int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute) { - if (dai->ops.digital_mute) - return dai->ops.digital_mute(dai, mute); + if (dai->ops->digital_mute) + return dai->ops->digital_mute(dai, mute); else return -EINVAL; } @@ -2211,6 +2211,9 @@ static int snd_soc_unregister_card(struct snd_soc_card *card) return 0; } +static struct snd_soc_dai_ops null_dai_ops = { +}; + /** * snd_soc_register_dai - Register a DAI with the ASoC core * @@ -2225,6 +2228,9 @@ int snd_soc_register_dai(struct snd_soc_dai *dai) if (!dai->dev) printk(KERN_WARNING "No device for DAI %s\n", dai->name); + if (!dai->ops) + dai->ops = &null_dai_ops; + INIT_LIST_HEAD(&dai->list); mutex_lock(&client_mutex); -- cgit v1.2.3 From d0cac39e4ec8097e4c7099d291b1fdcc0fe56b58 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 14:43:47 -0800 Subject: sparc64: Fix lost interrupts on sun4u. Based upon a report by Meelis Roos. Sparc64 SBUS and PCI controllers use a combination of IMAP and ICLR registers to manage device interrupts. The IMAP register contains the "valid" enable bit as well as CPU targetting information. Whereas the ICLR register is written with zero at the end of handling an interrupt to reset the state machine for that interrupt to IDLE so it can be sent again. For PCI slot and SBUS slot devices we can have multiple interrupts sharing the same IMAP register. There are individual ICLR registers but only one IMAP register for managing those. We represent each shared case with individual virtual IRQs so the generic IRQ layer thinks there is only one user of the IRQ instance. In such shared IMAP cases this is wrong, so if there are multiple active users then a free_irq() call will prematurely turn off the interrupt by clearing the Valid bit in the IMAP register even though there are other active users. Fix this by simply doing nothing in sun4u_disable_irq() and checking IRQF_DISABLED during IRQ dispatch. This situation doesn't exist in the hypervisor sun4v cases, so I left those alone. Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/kernel/irq_64.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index e289376198eb..1c378d8e90c5 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -323,17 +323,25 @@ static void sun4u_set_affinity(unsigned int virt_irq, sun4u_irq_enable(virt_irq); } +/* Don't do anything. The desc->status check for IRQ_DISABLED in + * handler_irq() will skip the handler call and that will leave the + * interrupt in the sent state. The next ->enable() call will hit the + * ICLR register to reset the state machine. + * + * This scheme is necessary, instead of clearing the Valid bit in the + * IMAP register, to handle the case of IMAP registers being shared by + * multiple INOs (and thus ICLR registers). Since we use a different + * virtual IRQ for each shared IMAP instance, the generic code thinks + * there is only one user so it prematurely calls ->disable() on + * free_irq(). + * + * We have to provide an explicit ->disable() method instead of using + * NULL to get the default. The reason is that if the generic code + * sees that, it also hooks up a default ->shutdown method which + * invokes ->mask() which we do not want. See irq_chip_set_defaults(). + */ static void sun4u_irq_disable(unsigned int virt_irq) { - struct irq_handler_data *data = get_irq_chip_data(virt_irq); - - if (likely(data)) { - unsigned long imap = data->imap; - unsigned long tmp = upa_readq(imap); - - tmp &= ~IMAP_VALID; - upa_writeq(tmp, imap); - } } static void sun4u_irq_eoi(unsigned int virt_irq) @@ -746,7 +754,8 @@ void handler_irq(int irq, struct pt_regs *regs) desc = irq_desc + virt_irq; - desc->handle_irq(virt_irq, desc); + if (!(desc->status & IRQ_DISABLED)) + desc->handle_irq(virt_irq, desc); bucket_pa = next_pa; } -- cgit v1.2.3 From 49bc46360d68156ce82b2b1a12badb80078453a0 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 26 Feb 2009 11:04:23 +0100 Subject: I/OAT: add verification for proper APICID_TAG_MAP setting by BIOS BIOS versions for systems with I/OAT ver.2 have been found which fail to program APICID_TAG_MAP for DCA. The ioatdma driver should recognize incorrectly set APICID_TAG_MAP and disable DCA in that case. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dma/ioat_dca.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c index 6cf622da0286..78705ca7d36a 100644 --- a/drivers/dma/ioat_dca.c +++ b/drivers/dma/ioat_dca.c @@ -49,6 +49,23 @@ #define DCA_TAG_MAP_MASK 0xDF +/* expected tag map bytes for I/OAT ver.2 */ +#define DCA2_TAG_MAP_BYTE0 0x80 +#define DCA2_TAG_MAP_BYTE1 0x0 +#define DCA2_TAG_MAP_BYTE2 0x81 +#define DCA2_TAG_MAP_BYTE3 0x82 +#define DCA2_TAG_MAP_BYTE4 0x82 + +/* verify if tag map matches expected values */ +static inline int dca2_tag_map_valid(u8 *tag_map) +{ + return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) && + (tag_map[1] == DCA2_TAG_MAP_BYTE1) && + (tag_map[2] == DCA2_TAG_MAP_BYTE2) && + (tag_map[3] == DCA2_TAG_MAP_BYTE3) && + (tag_map[4] == DCA2_TAG_MAP_BYTE4)); +} + /* * "Legacy" DCA systems do not implement the DCA register set in the * I/OAT device. Software needs direct support for their tag mappings. @@ -452,6 +469,13 @@ struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase) ioatdca->tag_map[i] = 0; } + if (!dca2_tag_map_valid(ioatdca->tag_map)) { + dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, " + "disabling DCA\n"); + free_dca_provider(dca); + return NULL; + } + err = register_dca_provider(dca, &pdev->dev); if (err) { free_dca_provider(dca); -- cgit v1.2.3 From ea9c717d0148d4194f9bd04ecfa6b59b20fc0a08 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 26 Feb 2009 11:04:38 +0100 Subject: I/OAT: do not set DCACTRL_CMPL_WRITE_ENABLE for I/OAT ver.3 Flag DCACTRL_CMPL_WRITE_ENABLE is valid only for I/OAT ver.2 so it should not be set for I/OAT ver.3. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index b3759c4b6536..879f4a06e3ca 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -189,11 +189,13 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) ioat_chan->xfercap = xfercap; ioat_chan->desccount = 0; INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2); - if (ioat_chan->device->version != IOAT_VER_1_2) { - writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE - | IOAT_DMA_DCA_ANY_CPU, - ioat_chan->reg_base + IOAT_DCACTRL_OFFSET); - } + if (ioat_chan->device->version == IOAT_VER_2_0) + writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE | + IOAT_DMA_DCA_ANY_CPU, + ioat_chan->reg_base + IOAT_DCACTRL_OFFSET); + else if (ioat_chan->device->version == IOAT_VER_3_0) + writel(IOAT_DMA_DCA_ANY_CPU, + ioat_chan->reg_base + IOAT_DCACTRL_OFFSET); spin_lock_init(&ioat_chan->cleanup_lock); spin_lock_init(&ioat_chan->desc_lock); INIT_LIST_HEAD(&ioat_chan->free_desc); -- cgit v1.2.3 From 8b794b141c633083408d0bfb2229b3406d0ebf99 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 26 Feb 2009 11:04:54 +0100 Subject: I/OAT: fail initialization on zero channels detection On some systems with I/OAT ver.2 when DCA is disabled in BIOS situations have been observed that zero DMA channels are detected instead of four. To avoid kernel panic driver should fail gracefully with appropriate message. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 879f4a06e3ca..9012da7908f5 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1659,6 +1659,13 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev, " %d channels, device version 0x%02x, driver version %s\n", device->common.chancnt, device->version, IOAT_DMA_VERSION); + if (!device->common.chancnt) { + dev_err(&device->pdev->dev, + "Intel(R) I/OAT DMA Engine problem found: " + "zero channels detected\n"); + goto err_setup_interrupts; + } + err = ioat_dma_setup_interrupts(device); if (err) goto err_setup_interrupts; -- cgit v1.2.3 From 2b8a6bf896ef47cc7d84c503079cc7b99789f9fa Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 26 Feb 2009 11:05:07 +0100 Subject: I/OAT: cancel watchdog before dma remove Channel watchdog should be canceled before the rest of dma remove stuff. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 9012da7908f5..fc9b845ee893 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1705,6 +1705,9 @@ void ioat_dma_remove(struct ioatdma_device *device) struct dma_chan *chan, *_chan; struct ioat_dma_chan *ioat_chan; + if (device->version != IOAT_VER_3_0) + cancel_delayed_work(&device->work); + ioat_dma_remove_interrupts(device); dma_async_device_unregister(&device->common); @@ -1716,10 +1719,6 @@ void ioat_dma_remove(struct ioatdma_device *device) pci_release_regions(device->pdev); pci_disable_device(device->pdev); - if (device->version != IOAT_VER_3_0) { - cancel_delayed_work(&device->work); - } - list_for_each_entry_safe(chan, _chan, &device->common.channels, device_node) { ioat_chan = to_ioat_chan(chan); -- cgit v1.2.3 From 5de22343b2303b278ab562e5d166ffe306566d30 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 26 Feb 2009 11:05:17 +0100 Subject: I/OAT: set tcp_dma_copybreak to 256k for I/OAT ver.3 Upcoming server platforms from Intel based on the Nehalem performance have significantly improved CPU based copy performance. However, the DMA engine can still be effective at higher I/O sizes for TCP traffic and at this time copybreak should be set to 256k for TCP traffic only. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dma/ioatdma.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h index a3306d0e1372..dcf8db513c3a 100644 --- a/drivers/dma/ioatdma.h +++ b/drivers/dma/ioatdma.h @@ -135,12 +135,14 @@ static inline void ioat_set_tcp_copy_break(struct ioatdma_device *dev) #ifdef CONFIG_NET_DMA switch (dev->version) { case IOAT_VER_1_2: - case IOAT_VER_3_0: sysctl_tcp_dma_copybreak = 4096; break; case IOAT_VER_2_0: sysctl_tcp_dma_copybreak = 2048; break; + case IOAT_VER_3_0: + sysctl_tcp_dma_copybreak = 262144; + break; } #endif } -- cgit v1.2.3 From aa2d0b8b97efa1033609ca89b9faa5d3a1232959 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Thu, 26 Feb 2009 11:05:30 +0100 Subject: I/OAT: list usage cleanup Trivial cleanup, list_del(); list_add_tail() is equivalent to list_move_tail(). Semantic patch for coccinelle can be found at www.cccmz.de/~snakebyte/list_move_tail.spatch Signed-off-by: Eric Sesterhenn Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index fc9b845ee893..ae8c0ce3b86a 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1171,9 +1171,8 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan) * up if the client is done with the descriptor */ if (async_tx_test_ack(&desc->async_tx)) { - list_del(&desc->node); - list_add_tail(&desc->node, - &ioat_chan->free_desc); + list_move_tail(&desc->node, + &ioat_chan->free_desc); } else desc->async_tx.cookie = 0; } else { -- cgit v1.2.3 From 211a22ce08dbb27eb1a66df8a4bdae5e96092bc8 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 26 Feb 2009 11:05:43 +0100 Subject: I/OAT: update driver version and copyright dates Together with new fixes update driver version and extend copyright dates ranges. Signed-off-by: Maciej Sosnowski Signed-off-by: Shannon Nelson Acked-by: Jeff Kirsher Signed-off-by: Dan Williams --- drivers/dca/dca-core.c | 2 +- drivers/dma/ioat.c | 2 +- drivers/dma/ioat_dca.c | 2 +- drivers/dma/ioat_dma.c | 2 +- drivers/dma/ioatdma.h | 4 ++-- drivers/dma/ioatdma_hw.h | 2 +- drivers/dma/ioatdma_registers.h | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c index 33bd75347518..25b743abfb59 100644 --- a/drivers/dca/dca-core.c +++ b/drivers/dca/dca-core.c @@ -1,5 +1,5 @@ /* - * Copyright(c) 2007 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c index 4105d6575b64..ed83dd9df192 100644 --- a/drivers/dma/ioat.c +++ b/drivers/dma/ioat.c @@ -1,6 +1,6 @@ /* * Intel I/OAT DMA Linux driver - * Copyright(c) 2007 Intel Corporation. + * Copyright(c) 2007 - 2009 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c index 78705ca7d36a..c012a1e15043 100644 --- a/drivers/dma/ioat_dca.c +++ b/drivers/dma/ioat_dca.c @@ -1,6 +1,6 @@ /* * Intel I/OAT DMA Linux driver - * Copyright(c) 2007 Intel Corporation. + * Copyright(c) 2007 - 2009 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index ae8c0ce3b86a..068b63514525 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1,6 +1,6 @@ /* * Intel I/OAT DMA Linux driver - * Copyright(c) 2004 - 2007 Intel Corporation. + * Copyright(c) 2004 - 2009 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h index dcf8db513c3a..a52ff4bd4601 100644 --- a/drivers/dma/ioatdma.h +++ b/drivers/dma/ioatdma.h @@ -1,5 +1,5 @@ /* - * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved. + * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -29,7 +29,7 @@ #include #include -#define IOAT_DMA_VERSION "3.30" +#define IOAT_DMA_VERSION "3.64" enum ioat_interrupt { none = 0, diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h index f1ae2c776f74..afa57eef86c9 100644 --- a/drivers/dma/ioatdma_hw.h +++ b/drivers/dma/ioatdma_hw.h @@ -1,5 +1,5 @@ /* - * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved. + * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h index 827cb503cac6..49bc277424f8 100644 --- a/drivers/dma/ioatdma_registers.h +++ b/drivers/dma/ioatdma_registers.h @@ -1,5 +1,5 @@ /* - * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved. + * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free -- cgit v1.2.3 From 0c33e1ca3d80647f2e72e44524fd21e79214da20 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 2 Mar 2009 13:31:35 -0700 Subject: I/OAT: fail self-test if callback test reaches timeout If we miss interrupts in the self test then fail registration of this channel as it is unsuitable for use as a public channel. Signed-off-by: Maciej Sosnowski Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 068b63514525..5905cd36bcd2 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1363,6 +1363,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device) dma_cookie_t cookie; int err = 0; struct completion cmp; + unsigned long tmo; src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL); if (!src) @@ -1414,9 +1415,10 @@ static int ioat_dma_self_test(struct ioatdma_device *device) } device->common.device_issue_pending(dma_chan); - wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000)); + tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000)); - if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL) + if (tmo == 0 || + device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) { dev_err(&device->pdev->dev, "Self-test copy timed out, disabling\n"); -- cgit v1.2.3 From 900325a6ce33995688b7a680a34e7698f16f4d72 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 2 Mar 2009 15:33:46 -0700 Subject: fsldma: fix off by one in dma_halt Prevent dev_err from firing even if we successfully detected 'dma-idle' before the full 1ms timeout has elapsed. Acked-by: Roel Kluin Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 70126a606239..86d6da47f558 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -158,7 +158,8 @@ static void dma_start(struct fsl_dma_chan *fsl_chan) static void dma_halt(struct fsl_dma_chan *fsl_chan) { - int i = 0; + int i; + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA, 32); @@ -166,8 +167,11 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan) DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32); - while (!dma_is_idle(fsl_chan) && (i++ < 100)) + for (i = 0; i < 100; i++) { + if (dma_is_idle(fsl_chan)) + break; udelay(10); + } if (i >= 100 && !dma_is_idle(fsl_chan)) dev_err(fsl_chan->dev, "DMA halt timeout!\n"); } -- cgit v1.2.3 From a09b09ae51ace43d28cd9bc1c8bb97986f2b55a6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 25 Feb 2009 13:56:21 +0100 Subject: iop-adma, mv_xor: fix mem leak on self-test setup failure iop_adma_zero_sum_self_test has the brackets in the wrong place for the setup failure deallocation path. This error was duplicated in mv_xor_xor_self_test. Signed-off-by: Roel Kluin Signed-off-by: Dan Williams --- drivers/dma/iop-adma.c | 16 ++++++++-------- drivers/dma/mv_xor.c | 16 ++++++++-------- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index ea5440dd10dc..4131ab8e5032 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -928,19 +928,19 @@ iop_adma_xor_zero_sum_self_test(struct iop_adma_device *device) for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) { xor_srcs[src_idx] = alloc_page(GFP_KERNEL); - if (!xor_srcs[src_idx]) - while (src_idx--) { + if (!xor_srcs[src_idx]) { + while (src_idx--) __free_page(xor_srcs[src_idx]); - return -ENOMEM; - } + return -ENOMEM; + } } dest = alloc_page(GFP_KERNEL); - if (!dest) - while (src_idx--) { + if (!dest) { + while (src_idx--) __free_page(xor_srcs[src_idx]); - return -ENOMEM; - } + return -ENOMEM; + } /* Fill in src buffers */ for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) { diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index d35cbd1ff0b3..2a4e3e30a046 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -1019,19 +1019,19 @@ mv_xor_xor_self_test(struct mv_xor_device *device) for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) { xor_srcs[src_idx] = alloc_page(GFP_KERNEL); - if (!xor_srcs[src_idx]) - while (src_idx--) { + if (!xor_srcs[src_idx]) { + while (src_idx--) __free_page(xor_srcs[src_idx]); - return -ENOMEM; - } + return -ENOMEM; + } } dest = alloc_page(GFP_KERNEL); - if (!dest) - while (src_idx--) { + if (!dest) { + while (src_idx--) __free_page(xor_srcs[src_idx]); - return -ENOMEM; - } + return -ENOMEM; + } /* Fill in src buffers */ for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) { -- cgit v1.2.3 From c74ef1f867d18171c8617519ee5fe40b02903934 Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Thu, 26 Feb 2009 12:29:20 +0100 Subject: ipu_idmac: fix spinlock type fix a probably accidently dropped reference operator while calling spin_unlock_restore to an ipu lock. Signed-off-by: Luotao Fu Cc: Guennadi Liakhovetski Signed-off-by: Andrew Morton Signed-off-by: Dan Williams --- drivers/dma/ipu/ipu_idmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 1f154d08e98f..ae50a9d1a4e6 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -729,7 +729,7 @@ static int ipu_init_channel_buffer(struct idmac_channel *ichan, ichan->status = IPU_CHANNEL_READY; - spin_unlock_irqrestore(ipu->lock, flags); + spin_unlock_irqrestore(&ipu->lock, flags); return 0; } -- cgit v1.2.3 From 7cbd4877e5b167b56a3d6033b926a9f925186e12 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 4 Mar 2009 16:06:03 -0700 Subject: dmatest: fix use after free in dmatest_exit dmatest_cleanup_chanel will free dtc, so grab ->chan before it goes away and use it to do the release. Reported-by: Thierry Reding Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 732fa1ec36ab..e190d8b30700 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -430,13 +430,15 @@ late_initcall(dmatest_init); static void __exit dmatest_exit(void) { struct dmatest_chan *dtc, *_dtc; + struct dma_chan *chan; list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) { list_del(&dtc->node); + chan = dtc->chan; dmatest_cleanup_channel(dtc); pr_debug("dmatest: dropped channel %s\n", - dma_chan_name(dtc->chan)); - dma_release_channel(dtc->chan); + dma_chan_name(chan)); + dma_release_channel(chan); } } module_exit(dmatest_exit); -- cgit v1.2.3 From 7ce9d5d1f3c8736511daa413c64985a05b2feee3 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Wed, 4 Mar 2009 18:38:18 -0500 Subject: ext4: fix ext4_free_inode() vs. ext4_claim_inode() race I was seeing fsck errors on inode bitmaps after a 4 thread dbench run on a 4 cpu machine: Inode bitmap differences: -50736 -(50752--50753) etc... I believe that this is because ext4_free_inode() uses atomic bitops, and although ext4_new_inode() *used* to also use atomic bitops for synchronization, commit 393418676a7602e1d7d3f6e560159c65c8cbd50e changed this to use the sb_bgl_lock, so that we could also synchronize against read_inode_bitmap and initialization of uninit inode tables. However, that change left ext4_free_inode using atomic bitops, which I think leaves no synchronization between setting & unsetting bits in the inode table. The below patch fixes it for me, although I wonder if we're getting at all heavy-handed with this spinlock... Signed-off-by: Eric Sandeen Reviewed-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/ialloc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index f18a919be70b..627f8c3337a3 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -188,7 +188,7 @@ void ext4_free_inode(handle_t *handle, struct inode *inode) struct ext4_group_desc *gdp; struct ext4_super_block *es; struct ext4_sb_info *sbi; - int fatal = 0, err, count; + int fatal = 0, err, count, cleared; ext4_group_t flex_group; if (atomic_read(&inode->i_count) > 1) { @@ -248,8 +248,10 @@ void ext4_free_inode(handle_t *handle, struct inode *inode) goto error_return; /* Ok, now we can actually update the inode bitmaps.. */ - if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group), - bit, bitmap_bh->b_data)) + spin_lock(sb_bgl_lock(sbi, block_group)); + cleared = ext4_clear_bit(bit, bitmap_bh->b_data); + spin_unlock(sb_bgl_lock(sbi, block_group)); + if (!cleared) ext4_error(sb, "ext4_free_inode", "bit already cleared for inode %lu", ino); else { -- cgit v1.2.3 From 118e1ef6fabfc023126e6075f6ac0fc729cb5285 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 5 Mar 2009 00:31:12 +0000 Subject: Squashfs: Fix oops when reading fsfuzzer corrupted filesystems This fixes a code regression caused by the recent mainlining changes. The recent code changes call zlib_inflate repeatedly, decompressing into separate 4K buffers, this code didn't check for the possibility that zlib_inflate might ask for too many buffers when decompressing corrupted data. Signed-off-by: Phillip Lougher --- fs/squashfs/block.c | 13 +++++++++++-- fs/squashfs/cache.c | 4 ++-- fs/squashfs/squashfs.h | 2 +- fs/squashfs/super.c | 2 +- 4 files changed, 15 insertions(+), 6 deletions(-) diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index c837dfc2b3c6..321728f48f2d 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -80,7 +80,7 @@ static struct buffer_head *get_block_length(struct super_block *sb, * generated a larger block - this does occasionally happen with zlib). */ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, - int length, u64 *next_index, int srclength) + int length, u64 *next_index, int srclength, int pages) { struct squashfs_sb_info *msblk = sb->s_fs_info; struct buffer_head **bh; @@ -185,6 +185,14 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, } if (msblk->stream.avail_out == 0) { + if (page == pages) { + ERROR("zlib_inflate tried to " + "decompress too much data, " + "expected %d bytes. Zlib " + "data probably corrupt\n", + srclength); + goto release_mutex; + } msblk->stream.next_out = buffer[page++]; msblk->stream.avail_out = PAGE_CACHE_SIZE; } @@ -268,7 +276,8 @@ block_release: put_bh(bh[k]); read_failure: - ERROR("sb_bread failed reading block 0x%llx\n", cur_index); + ERROR("squashfs_read_data failed to read block 0x%llx\n", + (unsigned long long) index); kfree(bh); return -EIO; } diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c index f29eda16d25e..1c4739e33af6 100644 --- a/fs/squashfs/cache.c +++ b/fs/squashfs/cache.c @@ -119,7 +119,7 @@ struct squashfs_cache_entry *squashfs_cache_get(struct super_block *sb, entry->length = squashfs_read_data(sb, entry->data, block, length, &entry->next_index, - cache->block_size); + cache->block_size, cache->pages); spin_lock(&cache->lock); @@ -406,7 +406,7 @@ int squashfs_read_table(struct super_block *sb, void *buffer, u64 block, for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE) data[i] = buffer; res = squashfs_read_data(sb, data, block, length | - SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length); + SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages); kfree(data); return res; } diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h index 6b2515d027d5..0e9feb6adf7e 100644 --- a/fs/squashfs/squashfs.h +++ b/fs/squashfs/squashfs.h @@ -34,7 +34,7 @@ static inline struct squashfs_inode_info *squashfs_i(struct inode *inode) /* block.c */ extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *, - int); + int, int); /* cache.c */ extern struct squashfs_cache *squashfs_cache_init(char *, int, int); diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index 071df5b5b491..681ec0d83799 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -389,7 +389,7 @@ static int __init init_squashfs_fs(void) return err; } - printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) " + printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) " "Phillip Lougher\n"); return 0; -- cgit v1.2.3 From edf2e2811efa9304ebe14f778d33b764cfd58b7a Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 5 Mar 2009 00:40:13 +0000 Subject: Squashfs: fix documentation typo, Cramfs filesystem limit is 256 MiB Signed-off-by: Phillip Lougher --- Documentation/filesystems/squashfs.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt index 3e79e4a7a392..b324c033035a 100644 --- a/Documentation/filesystems/squashfs.txt +++ b/Documentation/filesystems/squashfs.txt @@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs: Squashfs Cramfs -Max filesystem size: 2^64 16 MiB +Max filesystem size: 2^64 256 MiB Max file size: ~ 2 TiB 16 MiB Max files: unlimited unlimited Max directories: unlimited unlimited -- cgit v1.2.3 From f4f8056a862a9950320429dfda708c88b4ce6025 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 5 Mar 2009 00:55:31 +0000 Subject: Squashfs: frag_size should be signed, as it can hold an error result Signed-off-by: Roel Kluin Signed-off-by: Phillip Lougher --- fs/squashfs/inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c index 7a63398bb855..9101dbde39ec 100644 --- a/fs/squashfs/inode.c +++ b/fs/squashfs/inode.c @@ -133,7 +133,8 @@ int squashfs_read_inode(struct inode *inode, long long ino) type = le16_to_cpu(sqshb_ino->inode_type); switch (type) { case SQUASHFS_REG_TYPE: { - unsigned int frag_offset, frag_size, frag; + unsigned int frag_offset, frag; + int frag_size; u64 frag_blk; struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg; @@ -175,7 +176,8 @@ int squashfs_read_inode(struct inode *inode, long long ino) break; } case SQUASHFS_LREG_TYPE: { - unsigned int frag_offset, frag_size, frag; + unsigned int frag_offset, frag; + int frag_size; u64 frag_blk; struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg; -- cgit v1.2.3 From 36e8abf3edcd2d207193ec5741d1a2a645d470a5 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 5 Mar 2009 00:16:26 -0500 Subject: [CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor. The latency of p4-clockmod sucks so hard that scaling on a regular basis with ondemand is a really bad idea. Signed-off-by: Matthew Garrett Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 1778402305e0..352cf9a49164 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -246,7 +246,10 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* assumed */ + + /* the transition latency is set to be 1 higher than the maximum + * transition latency of the ondemand governor */ + policy->cpuinfo.transition_latency = 10000001; policy->cur = stock_freq; return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); -- cgit v1.2.3 From 7acab7a9ca6b0c5b820f083424c57e6ac2031d9d Mon Sep 17 00:00:00 2001 From: Enrik Berkhan Date: Thu, 5 Mar 2009 14:42:30 +0800 Subject: Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5 IMHO the setting should depend on ANOMALY_05000305 which is about the availability of the bit, not ANOMALY_05000265 which only describes the SPORT sensitivity to noise (checked for BF561 only, though). If that's not true for other BF variants, maybe the definition of ANOMALY_05000265 for BF561 should be changed to '(1)' instead. Signed-off-by: Enrik Berkhan Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/clocks-init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 9dddb6f8cc85..35393651359b 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -17,7 +17,7 @@ #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ - (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) + (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) __attribute__((l1_text)) static void do_sync(void) -- cgit v1.2.3 From 929ef1a1f566087e4b362e3a56c50bf9db30e3c5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 5 Mar 2009 17:37:12 +0900 Subject: sh: urquell: Add smc91x support and update defconfig accordingly. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/board-urquell.c | 34 ++ arch/sh/configs/urquell_defconfig | 926 +++++++++++++++++++++++++++++++++++--- 2 files changed, 896 insertions(+), 64 deletions(-) diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index d5caeabf46e0..17036ce20086 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,32 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "SMC91C111" , + .start = 0x05800300, + .end = 0x0580030f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 11, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, + .dev = { + .platform_data = &smc91x_info, + }, +}; + static struct mtd_partition nor_flash_partitions[] = { { .name = "loader", @@ -92,6 +119,7 @@ static struct platform_device nor_flash_device = { static struct platform_device *urquell_devices[] __initdata = { &heartbeat_device, + &smc91x_eth_device, &nor_flash_device, }; @@ -111,6 +139,11 @@ static void urquell_power_off(void) __raw_writew(0xa5a5, UBOARDREG(SRSTR)); } +static void __init urquell_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); +} + /* Initialize the board */ static void __init urquell_setup(char **cmdline_p) { @@ -125,4 +158,5 @@ static void __init urquell_setup(char **cmdline_p) static struct sh_machine_vector mv_urquell __initmv = { .mv_name = "Urquell", .mv_setup = urquell_setup, + .mv_init_irq = urquell_init_irq, }; diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index 94a4bdbd1bc0..be726c7cdf91 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc4 -# Tue Mar 3 16:20:09 2009 +# Thu Mar 5 17:28:13 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -29,13 +30,20 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # -# CONFIG_EXPERIMENTAL is not set +CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # # RCU Subsystem @@ -45,45 +53,82 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=17 +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set -# CONFIG_PRINTK is not set -# CONFIG_BUG is not set -# CONFIG_ELF_CORE is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_TIMERFD is not set -# CONFIG_EVENTFD is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -# CONFIG_AIO is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set # CONFIG_SLOB is not set -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -# CONFIG_BLOCK is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set # @@ -135,9 +180,11 @@ CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y +# CONFIG_X2TLB is not set CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y @@ -158,6 +205,7 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y @@ -180,7 +228,7 @@ CONFIG_CACHE_WRITEBACK=y CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_STORE_QUEUES is not set +CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_FPU=y @@ -195,9 +243,9 @@ CONFIG_SH_URQUELL=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -CONFIG_SH_PCLK_FREQ=31250000 +CONFIG_SH_PCLK_FREQ=33333333 CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y +# CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -230,9 +278,12 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set +# CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y CONFIG_GUSA=y # @@ -240,20 +291,116 @@ CONFIG_GUSA=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_CMDLINE_BOOL is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m" # # Bus options # # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set -# CONFIG_NET is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -262,25 +409,39 @@ CONFIG_BINFMT_ELF=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # -# CONFIG_MTD_CHAR is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -294,7 +455,7 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=y # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -315,6 +476,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -336,20 +498,176 @@ CONFIG_MTD_PHYSMAP=y # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # -# CONFIG_SCSI_DMA is not set +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -360,8 +678,12 @@ CONFIG_HAVE_IDE=y # # Character devices # -# CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -377,15 +699,64 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set -# CONFIG_LEGACY_PTYS is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set -# CONFIG_I2C is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # # Memory mapped GPIO expanders: @@ -394,6 +765,9 @@ CONFIG_GPIOLIB=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # # PCI GPIO expanders: @@ -419,9 +793,16 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set +CONFIG_MFD_SM501=y +# CONFIG_MFD_SM501_GPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -432,6 +813,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # @@ -444,15 +826,202 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=m +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set # CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -465,38 +1034,171 @@ CONFIG_SSB_POSSIBLE=y # # File systems # -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + # # Pseudo filesystems # -# CONFIG_PROC_FS is not set -# CONFIG_SYSFS is not set -# CONFIG_TMPFS is not set +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -# CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_NLS is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y @@ -504,6 +1206,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers # +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set @@ -514,21 +1217,116 @@ CONFIG_HAVE_ARCH_KGDB=y # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set +CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.2.3 From c2503cd3be9eacb1dd06ec5b6fba8bb06aac12a8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Mar 2009 09:37:40 +0100 Subject: ALSA: hdsp - Ignore MIDI and PCM events in interrupts until initialized Ignore MIDI and PCM events in the interrupt handler until the device gets initialized properly. Otherwise you may get kernel panic by the access to uninitialized devices via hotplugging. Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index dc65fe1c9c65..314e73531bd1 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -3740,6 +3740,9 @@ static irqreturn_t snd_hdsp_interrupt(int irq, void *dev_id) midi0status = hdsp_read (hdsp, HDSP_midiStatusIn0) & 0xff; midi1status = hdsp_read (hdsp, HDSP_midiStatusIn1) & 0xff; + if (!(hdsp->state & HDSP_InitializationComplete)) + return IRQ_HANDLED; + if (audio) { if (hdsp->capture_substream) snd_pcm_period_elapsed(hdsp->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); -- cgit v1.2.3 From 37db623ae2a7bde234a8ed683d0d13d6f939199c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Mar 2009 09:40:16 +0100 Subject: ALSA: hda - Fix check of ALC888S-VC in alc888_coef_init() Fixed the wrong bits check to identify ALC888S-VC model in alc888_coef_init(). Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 91ef9f27b120..6325ea43cf08 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -982,7 +982,7 @@ static void alc888_coef_init(struct hda_codec *codec) snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 0); tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0); snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7); - if ((tmp & 0xf0) == 2) + if ((tmp & 0xf0) == 0x20) /* alc888S-VC */ snd_hda_codec_read(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, 0x830); -- cgit v1.2.3 From a4b1fddcd40f10820fbc123d4d02cd62eeef476c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 5 Mar 2009 17:52:34 +0900 Subject: sh: Set a sensible default for the SH7786 pclk. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 83aee3db54b4..a4c2c8458630 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -466,7 +466,8 @@ config SH_PCLK_FREQ default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ - CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG + CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ + CPU_SUBTYPE_SH7786 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" -- cgit v1.2.3 From f7e989ab64f926e34bafea0752431e1fd6a618f3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 5 Mar 2009 17:33:36 +0800 Subject: Blackfin arch: make sure people do not set the kernel load address too high Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/arch_checks.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 98133b968f7b..b3a2e3fa15e3 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -62,3 +62,8 @@ #if (CONFIG_BOOT_LOAD & 0x3) # error "The kernel load address must be 4 byte aligned" #endif + +/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */ +#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000 +# error "The kernel load address is too high; keep it below 10meg for safety" +#endif -- cgit v1.2.3 From c19577e34e641f802ad35fc0204ff68ea16fe7a3 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Thu, 5 Mar 2009 17:35:59 +0800 Subject: Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/boards/ezbrd.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 0e175342112e..b044de49ecf0 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = { .name = "bfin_mac", .dev.platform_data = &bfin_mii_bus, }; -#endif #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) static struct dsa_platform_data ksz8893m_switch_data = { @@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = { .dev.platform_data = &ksz8893m_switch_data, }; #endif +#endif #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) /* SPI SWITCH CHIP */ @@ -179,6 +180,7 @@ static struct bfin5xx_spi_chip spi_switch_info = { .bits_per_word = 8, }; #endif +#endif #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { @@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) { @@ -271,6 +274,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif +#endif #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { @@ -630,11 +634,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mii_bus, &bfin_mac_device, -#endif - #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) &ksz8893m_switch_device, #endif +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, -- cgit v1.2.3 From d7ff1a90b2d3d122b896056d63db919617e9b6cd Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 5 Mar 2009 18:26:59 +0800 Subject: Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit Run IFLUSH twice to avoid loading wrong instruction after invalidating icache and following sequence is met. 1) The one instruction address is cached in the icache. 2) This instruction in SDRAM is changed. 3) IFLASH[P0] is executed only once in lackfin_icache_flush_range(). 4) This instruction is executed again, but not the changed new one. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cache.S | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 3c98dacbf289..aa0648c6a9fe 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -66,11 +66,33 @@ /* Invalidate all instruction cache lines assocoiated with this memory area */ ENTRY(_blackfin_icache_flush_range) +/* + * Walkaround to avoid loading wrong instruction after invalidating icache + * and following sequence is met. + * + * 1) One instruction address is cached in the instruction cache. + * 2) This instruction in SDRAM is changed. + * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). + * 4) This instruction is executed again, but the old one is loaded. + */ + P0 = R0; + IFLUSH[P0]; do_flush IFLUSH, , nop ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) +/* + * Walkaround to avoid loading wrong instruction after invalidating icache + * and following sequence is met. + * + * 1) One instruction address is cached in the instruction cache. + * 2) This instruction in SDRAM is changed. + * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). + * 4) This instruction is executed again, but the old one is loaded. + */ + P0 = R0; + IFLUSH[P0]; do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) -- cgit v1.2.3 From 5047607f0170b1f797a2fe37bb45310c1e1d5ce0 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Thu, 5 Mar 2009 17:32:41 +0800 Subject: Blackfin arch: update default kernel config, select KSZ8893M driver for BF518 Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF518F-EZBRD_defconfig | 63 ++++++++++++++++++++++++++-- 1 file changed, 59 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 4fdb9e04759f..281f4b60e603 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Fri Jan 9 17:58:41 2009 +# Linux kernel version: 2.6.28 +# Fri Feb 20 10:01:44 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -133,10 +133,15 @@ CONFIG_BF518=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 @@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set +CONFIG_NET_DSA=y +# CONFIG_NET_DSA_TAG_DSA is not set +# CONFIG_NET_DSA_TAG_EDSA is not set +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_TAG_STPID=y +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_NET_DSA_KSZ8893M=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB_TESTCASE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y # CONFIG_DEBUG_HWERR is not set @@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -- cgit v1.2.3 From 00049522425e8390d1815e1579733644ad2bb0c7 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Thu, 5 Mar 2009 18:18:49 +0800 Subject: Blackfin arch: Random read/write errors are a bad thing Random read/write errors are a bad thing - so don't let anyone (including the test bench) run on something we know is bad. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 4 ++++ arch/blackfin/mach-common/arch_checks.c | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index e5c116230800..4646b985cc9d 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } + /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ + if (bfin_cpuid() == 0x27de && bfin_revid() == 1) + panic("You can't run on this processor due to 05000448\n"); + printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index b3a2e3fa15e3..a2ca26aa210d 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -67,3 +67,9 @@ #if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000 # error "The kernel load address is too high; keep it below 10meg for safety" #endif + +#ifdef ANOMALY_05000448 +# if ANOMALY_05000448 +# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. +# endif +#endif -- cgit v1.2.3 From ba0dade4bbe6bb26b975323726f7214278d5e994 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 5 Mar 2009 18:41:24 +0800 Subject: Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup from "mem" Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/dpmc_modes.S | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 4da50bcd9300..8009a512fb11 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -376,10 +376,22 @@ ENTRY(_do_hibernate) #endif #ifdef PINT0_ASSIGN + PM_SYS_PUSH(PINT0_MASK_SET) + PM_SYS_PUSH(PINT1_MASK_SET) + PM_SYS_PUSH(PINT2_MASK_SET) + PM_SYS_PUSH(PINT3_MASK_SET) PM_SYS_PUSH(PINT0_ASSIGN) PM_SYS_PUSH(PINT1_ASSIGN) PM_SYS_PUSH(PINT2_ASSIGN) PM_SYS_PUSH(PINT3_ASSIGN) + PM_SYS_PUSH(PINT0_INVERT_SET) + PM_SYS_PUSH(PINT1_INVERT_SET) + PM_SYS_PUSH(PINT2_INVERT_SET) + PM_SYS_PUSH(PINT3_INVERT_SET) + PM_SYS_PUSH(PINT0_EDGE_SET) + PM_SYS_PUSH(PINT1_EDGE_SET) + PM_SYS_PUSH(PINT2_EDGE_SET) + PM_SYS_PUSH(PINT3_EDGE_SET) #endif PM_SYS_PUSH(EBIU_AMBCTL0) @@ -714,10 +726,22 @@ ENTRY(_do_hibernate) PM_SYS_POP(EBIU_AMBCTL0) #ifdef PINT0_ASSIGN + PM_SYS_POP(PINT3_EDGE_SET) + PM_SYS_POP(PINT2_EDGE_SET) + PM_SYS_POP(PINT1_EDGE_SET) + PM_SYS_POP(PINT0_EDGE_SET) + PM_SYS_POP(PINT3_INVERT_SET) + PM_SYS_POP(PINT2_INVERT_SET) + PM_SYS_POP(PINT1_INVERT_SET) + PM_SYS_POP(PINT0_INVERT_SET) PM_SYS_POP(PINT3_ASSIGN) PM_SYS_POP(PINT2_ASSIGN) PM_SYS_POP(PINT1_ASSIGN) PM_SYS_POP(PINT0_ASSIGN) + PM_SYS_POP(PINT3_MASK_SET) + PM_SYS_POP(PINT2_MASK_SET) + PM_SYS_POP(PINT1_MASK_SET) + PM_SYS_POP(PINT0_MASK_SET) #endif #ifdef SICA_IWR1 -- cgit v1.2.3 From 8e2a769414604e016fcb3d0f15a2050b5d0d90c0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 5 Mar 2009 18:45:07 +0800 Subject: Blackfin arch: mark init_pda as __init as only __init funcs all it Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index d0532b72bba5..9c3629b9a689 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -104,7 +104,7 @@ void __init paging_init(void) } } -asmlinkage void init_pda(void) +asmlinkage void __init init_pda(void) { unsigned int cpu = raw_smp_processor_id(); -- cgit v1.2.3 From 27276ba21fe590edc43305f483565aa02010bbbb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 5 Mar 2009 18:47:20 +0800 Subject: Blackfin arch: remove spurious dash when dcache is off Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 4646b985cc9d..a58687bdee6a 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -1145,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " - "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", + "%d KB(L1 dcache%s) %d KB(L2 cache)\n", icache_size, dcache_size, #if defined CONFIG_BFIN_WB - "wb" + "-wb" #elif defined CONFIG_BFIN_WT - "wt" + "-wt" #endif "", 0); -- cgit v1.2.3 From 7786ce823b1c9a3de01a63857e3451890cb4e81c Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Thu, 5 Mar 2009 18:50:26 +0800 Subject: Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently Use copy_to_user_page and copy_from_user_page instead of memcpy. copy_to_user_page does cache flush when necessary. Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/ptrace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 594e325b40e4..d76618db50df 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #define TEXT_OFFSET 0 @@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(tmp) <= FIXED_CODE_END) { - memcpy(&tmp, (const void *)(addr), sizeof(tmp)); + copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp)); copied = sizeof(tmp); } else @@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(data) <= FIXED_CODE_END) { - memcpy((void *)(addr), &data, sizeof(data)); + copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data)); copied = sizeof(data); } else -- cgit v1.2.3 From a1a15ac5f9aeee521c048a88fc1aec848e623de7 Mon Sep 17 00:00:00 2001 From: Kris Shannon Date: Mon, 2 Mar 2009 19:47:37 +1100 Subject: Fix kernel NULL pointer dereference in xen-blkfront When booting Xen Dom0 on a pre-release 3.2.1 hypervisor the system Oopses on a "Unable to handle kernel NULL pointer dereference" in xenwatch. From the backtrace it looks like backend_changed is calling bdget_disk with a NULL pointer. Checking for NULL and returning ENODEV instead allows the kernel to boot. --- drivers/block/xen-blkfront.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b6c8ce254359..8f905089b72b 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -977,6 +977,8 @@ static void backend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: + if (info->gd == NULL) + xenbus_dev_fatal(dev, -ENODEV, "gd is NULL"); bd = bdget_disk(info->gd, 0); if (bd == NULL) xenbus_dev_fatal(dev, -ENODEV, "bdget failed"); -- cgit v1.2.3 From 5e18cfd04feca78cc08a6b8b71a60a610de81eaa Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 27 Feb 2009 08:10:26 +0100 Subject: cciss: remove 30 second initial timeout on controller reset Commit 5e4c91c84b194b26cf592779e451f4b5be777cba forgot to remove the initial sleep, get rid of it. Thanks to Randy Dunlap for spotting this error. Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index b5a061114630..4f9b6d792017 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3606,11 +3606,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev)) return -ENODEV; - /* Some devices (notably the HP Smart Array 5i Controller) - need a little pause here */ - schedule_timeout_uninterruptible(30*HZ); - - /* Now try to get the controller to respond to a no-op */ + /* Now try to get the controller to respond to a no-op. Some + devices (notably the HP Smart Array 5i Controller) need + up to 30 seconds to respond. */ for (i=0; i<30; i++) { if (cciss_noop(pdev) == 0) break; -- cgit v1.2.3 From a3941ec101a5ec54c1e929730afeb196441a171e Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 5 Mar 2009 08:03:53 +0100 Subject: loop: don't increment p->offset with (size_t) -EINVAL Upon a 'transfer error block' size is set to -EINVAL, but this becomes positive since size is unsigned: p->offset still gets incremented. Signed-off-by: Roel Kluin Signed-off-by: Jens Axboe --- drivers/block/loop.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index edbaac6c0573..bf0345577672 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -392,8 +392,7 @@ lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf, struct loop_device *lo = p->lo; struct page *page = buf->page; sector_t IV; - size_t size; - int ret; + int size, ret; ret = buf->ops->confirm(pipe, buf); if (unlikely(ret)) -- cgit v1.2.3 From fb7b75abe58acfa586445e430c29412090ad2058 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Thu, 5 Mar 2009 19:42:43 +0800 Subject: Blackfin arch: cleanup bfin_sport.h header and export it to userspace Signed-off-by: Alon Bar-Lev Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/Kbuild | 1 + arch/blackfin/include/asm/bfin_sport.h | 45 +++++++++++----------------------- 2 files changed, 15 insertions(+), 31 deletions(-) diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 606ecfdcc962..09c31418cc08 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,3 +1,4 @@ include include/asm-generic/Kbuild.asm +unifdef-y += bfin_sport.h unifdef-y += fixed_code.h diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index fe88a2c19213..65a651db5b07 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/bfin_sport.h - * Based on: - * Author: Roy Huang (roy.huang@analog.com) + * bfin_sport.h - userspace header for bfin sport driver * - * Created: Thu Aug. 24 2006 - * Description: + * Copyright 2004-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __BFIN_SPORT_H__ @@ -42,11 +21,10 @@ #define NORM_FORMAT 0x0 #define ALAW_FORMAT 0x2 #define ULAW_FORMAT 0x3 -struct sport_register; /* Function driver which use sport must initialize the structure */ struct sport_config { - /*TDM (multichannels), I2S or other mode */ + /* TDM (multichannels), I2S or other mode */ unsigned int mode:3; /* if TDM mode is selected, channels must be set */ @@ -72,12 +50,18 @@ struct sport_config { int serial_clk; int fsync_clk; - unsigned int data_format:2; /*Normal, u-law or a-law */ + unsigned int data_format:2; /* Normal, u-law or a-law */ int word_len; /* How length of the word in bits, 3-32 bits */ int dma_enabled; }; +/* Userspace interface */ +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) + +#ifdef __KERNEL__ + struct sport_register { unsigned short tcr1; unsigned short reserved0; @@ -117,9 +101,6 @@ struct sport_register { unsigned long mrcs3; }; -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) - struct sport_dev { struct cdev cdev; /* Char device structure */ @@ -149,6 +130,8 @@ struct sport_dev { struct sport_config config; }; +#endif + #define SPORT_TCR1 0 #define SPORT_TCR2 1 #define SPORT_TCLKDIV 2 @@ -169,4 +152,4 @@ struct sport_dev { #define SPORT_MRCS2 22 #define SPORT_MRCS3 23 -#endif /*__BFIN_SPORT_H__*/ +#endif -- cgit v1.2.3 From 8150bc886be5ce3cc301a2baca1fcf2cf7bd7f39 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 4 Mar 2009 00:49:26 +0000 Subject: S3C24XX: Move and update IIS headers Move the IIS headers to their correct place. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- arch/arm/mach-s3c2410/dma.c | 2 +- arch/arm/mach-s3c2410/include/mach/hardware.h | 3 - arch/arm/mach-s3c2410/include/mach/io.h | 2 +- arch/arm/mach-s3c2412/dma.c | 4 +- arch/arm/mach-s3c2440/dma.c | 2 +- arch/arm/mach-s3c2443/dma.c | 2 +- arch/arm/mach-shark/include/mach/io.h | 2 +- arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 72 +++++++++++++++++++++ arch/arm/plat-s3c24xx/clock-dclk.c | 1 + arch/arm/plat-s3c24xx/include/plat/regs-iis.h | 77 +++++++++++++++++++++++ include/asm-arm/plat-s3c24xx/regs-iis.h | 77 ----------------------- include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h | 72 --------------------- sound/soc/s3c24xx/neo1973_wm8753.c | 2 +- sound/soc/s3c24xx/s3c2412-i2s.c | 6 +- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx_uda134x.c | 2 +- 16 files changed, 162 insertions(+), 166 deletions(-) create mode 100644 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-iis.h delete mode 100644 include/asm-arm/plat-s3c24xx/regs-iis.h delete mode 100644 include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 552b4c778fdc..440c014e24b3 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h index 74d5a1a4024c..db72beb61d7c 100644 --- a/arch/arm/mach-s3c2410/include/mach/hardware.h +++ b/arch/arm/mach-s3c2410/include/mach/hardware.h @@ -131,7 +131,4 @@ extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); /* machine specific hardware definitions should go after this */ -/* currently here until moved into config (todo) */ -#define CONFIG_NO_MULTIWORD_IO - #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h index 9813dbf2ae4f..c477771c0924 100644 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ b/arch/arm/mach-s3c2410/include/mach/io.h @@ -9,7 +9,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 919856c9433f..9e3478506c6f 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -29,8 +29,8 @@ #include #include #include -#include -#include +#include +#include #include #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 5b5ee0b8f4e0..69b6cf34df47 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 2a58a4d5aa5a..8430e5829186 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #define MAP(x) { \ diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h index c5cee829fc87..8ca7d7f09bdc 100644 --- a/arch/arm/mach-shark/include/mach/io.h +++ b/arch/arm/mach-shark/include/mach/io.h @@ -14,7 +14,7 @@ #define PCIO_BASE 0xe0000000 #define IO_SPACE_LIMIT 0xffffffff -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) +#define __io(a) __typesafe_io(PCIO_BASE + (a)) #define __mem_pci(addr) (addr) #endif diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h new file mode 100644 index 000000000000..25d4058bcfed --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -0,0 +1,72 @@ +/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H +#define __ASM_ARCH_REGS_S3C2412_IIS_H + +#define S3C2412_IISCON (0x00) +#define S3C2412_IISMOD (0x04) +#define S3C2412_IISFIC (0x08) +#define S3C2412_IISPSR (0x0C) +#define S3C2412_IISTXD (0x10) +#define S3C2412_IISRXD (0x14) + +#define S3C2412_IISCON_LRINDEX (1 << 11) +#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) +#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) +#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) +#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) +#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) +#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) +#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) +#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) +#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) +#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) +#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) + +#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) +#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) +#define S3C2412_IISMOD_SLAVE (2 << 10) +#define S3C2412_IISMOD_MASTER_MASK (3 << 10) +#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) +#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) +#define S3C2412_IISMOD_MODE_TXRX (2 << 8) +#define S3C2412_IISMOD_MODE_MASK (3 << 8) +#define S3C2412_IISMOD_LR_LLOW (0 << 7) +#define S3C2412_IISMOD_LR_RLOW (1 << 7) +#define S3C2412_IISMOD_SDF_IIS (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (0 << 5) +#define S3C2412_IISMOD_SDF_LSB (0 << 5) +#define S3C2412_IISMOD_SDF_MASK (3 << 5) +#define S3C2412_IISMOD_RCLK_256FS (0 << 3) +#define S3C2412_IISMOD_RCLK_512FS (1 << 3) +#define S3C2412_IISMOD_RCLK_384FS (2 << 3) +#define S3C2412_IISMOD_RCLK_768FS (3 << 3) +#define S3C2412_IISMOD_RCLK_MASK (3 << 3) +#define S3C2412_IISMOD_BCLK_32FS (0 << 1) +#define S3C2412_IISMOD_BCLK_48FS (1 << 1) +#define S3C2412_IISMOD_BCLK_16FS (2 << 1) +#define S3C2412_IISMOD_BCLK_24FS (3 << 1) +#define S3C2412_IISMOD_BCLK_MASK (3 << 1) +#define S3C2412_IISMOD_8BIT (1 << 0) + +#define S3C2412_IISPSR_PSREN (1 << 15) + +#define S3C2412_IISFIC_TXFLUSH (1 << 15) +#define S3C2412_IISFIC_RXFLUSH (1 << 7) +#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) + + + +#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ + diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 5b75a797b5ab..35219dcf9f08 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -18,6 +18,7 @@ #include #include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h new file mode 100644 index 000000000000..a6f1d5df13b4 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h @@ -0,0 +1,77 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2410_IISCON_LRINDEX (1<<8) +#define S3C2410_IISCON_TXFIFORDY (1<<7) +#define S3C2410_IISCON_RXFIFORDY (1<<6) +#define S3C2410_IISCON_TXDMAEN (1<<5) +#define S3C2410_IISCON_RXDMAEN (1<<4) +#define S3C2410_IISCON_TXIDLE (1<<3) +#define S3C2410_IISCON_RXIDLE (1<<2) +#define S3C2410_IISCON_PSCEN (1<<1) +#define S3C2410_IISCON_IISEN (1<<0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2440_IISMOD_MPLL (1<<9) +#define S3C2410_IISMOD_SLAVE (1<<8) +#define S3C2410_IISMOD_NOXFER (0<<6) +#define S3C2410_IISMOD_RXMODE (1<<6) +#define S3C2410_IISMOD_TXMODE (2<<6) +#define S3C2410_IISMOD_TXRXMODE (3<<6) +#define S3C2410_IISMOD_LR_LLOW (0<<5) +#define S3C2410_IISMOD_LR_RLOW (1<<5) +#define S3C2410_IISMOD_IIS (0<<4) +#define S3C2410_IISMOD_MSB (1<<4) +#define S3C2410_IISMOD_8BIT (0<<3) +#define S3C2410_IISMOD_16BIT (1<<3) +#define S3C2410_IISMOD_BITMASK (1<<3) +#define S3C2410_IISMOD_256FS (0<<2) +#define S3C2410_IISMOD_384FS (1<<2) +#define S3C2410_IISMOD_16FS (0<<0) +#define S3C2410_IISMOD_32FS (1<<0) +#define S3C2410_IISMOD_48FS (2<<0) +#define S3C2410_IISMOD_FS_MASK (3<<0) + +#define S3C2410_IISPSR (0x08) +#define S3C2410_IISPSR_INTMASK (31<<5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31<<0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1<<15) +#define S3C2410_IISFCON_RXDMA (1<<14) +#define S3C2410_IISFCON_TXENABLE (1<<13) +#define S3C2410_IISFCON_RXENABLE (1<<12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2400_IISFCON_TXDMA (1<<11) +#define S3C2400_IISFCON_RXDMA (1<<10) +#define S3C2400_IISFCON_TXENABLE (1<<9) +#define S3C2400_IISFCON_RXENABLE (1<<8) +#define S3C2400_IISFCON_TXMASK (0x07 << 4) +#define S3C2400_IISFCON_TXSHIFT (4) +#define S3C2400_IISFCON_RXMASK (0x07) +#define S3C2400_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h deleted file mode 100644 index a6f1d5df13b4..000000000000 --- a/include/asm-arm/plat-s3c24xx/regs-iis.h +++ /dev/null @@ -1,77 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1<<8) -#define S3C2410_IISCON_TXFIFORDY (1<<7) -#define S3C2410_IISCON_RXFIFORDY (1<<6) -#define S3C2410_IISCON_TXDMAEN (1<<5) -#define S3C2410_IISCON_RXDMAEN (1<<4) -#define S3C2410_IISCON_TXIDLE (1<<3) -#define S3C2410_IISCON_RXIDLE (1<<2) -#define S3C2410_IISCON_PSCEN (1<<1) -#define S3C2410_IISCON_IISEN (1<<0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1<<9) -#define S3C2410_IISMOD_SLAVE (1<<8) -#define S3C2410_IISMOD_NOXFER (0<<6) -#define S3C2410_IISMOD_RXMODE (1<<6) -#define S3C2410_IISMOD_TXMODE (2<<6) -#define S3C2410_IISMOD_TXRXMODE (3<<6) -#define S3C2410_IISMOD_LR_LLOW (0<<5) -#define S3C2410_IISMOD_LR_RLOW (1<<5) -#define S3C2410_IISMOD_IIS (0<<4) -#define S3C2410_IISMOD_MSB (1<<4) -#define S3C2410_IISMOD_8BIT (0<<3) -#define S3C2410_IISMOD_16BIT (1<<3) -#define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<2) -#define S3C2410_IISMOD_384FS (1<<2) -#define S3C2410_IISMOD_16FS (0<<0) -#define S3C2410_IISMOD_32FS (1<<0) -#define S3C2410_IISMOD_48FS (2<<0) -#define S3C2410_IISMOD_FS_MASK (3<<0) - -#define S3C2410_IISPSR (0x08) -#define S3C2410_IISPSR_INTMASK (31<<5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31<<0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1<<15) -#define S3C2410_IISFCON_RXDMA (1<<14) -#define S3C2410_IISFCON_TXENABLE (1<<13) -#define S3C2410_IISFCON_RXENABLE (1<<12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2400_IISFCON_TXDMA (1<<11) -#define S3C2400_IISFCON_RXDMA (1<<10) -#define S3C2400_IISFCON_TXENABLE (1<<9) -#define S3C2400_IISFCON_RXENABLE (1<<8) -#define S3C2400_IISFCON_TXMASK (0x07 << 4) -#define S3C2400_IISFCON_TXSHIFT (4) -#define S3C2400_IISFCON_RXMASK (0x07) -#define S3C2400_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h deleted file mode 100644 index 25d4058bcfed..000000000000 --- a/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H -#define __ASM_ARCH_REGS_S3C2412_IIS_H - -#define S3C2412_IISCON (0x00) -#define S3C2412_IISMOD (0x04) -#define S3C2412_IISFIC (0x08) -#define S3C2412_IISPSR (0x0C) -#define S3C2412_IISTXD (0x10) -#define S3C2412_IISRXD (0x14) - -#define S3C2412_IISCON_LRINDEX (1 << 11) -#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) -#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) -#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) -#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) -#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) -#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) -#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) -#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) -#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) -#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) -#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) - -#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) -#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) -#define S3C2412_IISMOD_SLAVE (2 << 10) -#define S3C2412_IISMOD_MASTER_MASK (3 << 10) -#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) -#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) -#define S3C2412_IISMOD_MODE_TXRX (2 << 8) -#define S3C2412_IISMOD_MODE_MASK (3 << 8) -#define S3C2412_IISMOD_LR_LLOW (0 << 7) -#define S3C2412_IISMOD_LR_RLOW (1 << 7) -#define S3C2412_IISMOD_SDF_IIS (0 << 5) -#define S3C2412_IISMOD_SDF_MSB (0 << 5) -#define S3C2412_IISMOD_SDF_LSB (0 << 5) -#define S3C2412_IISMOD_SDF_MASK (3 << 5) -#define S3C2412_IISMOD_RCLK_256FS (0 << 3) -#define S3C2412_IISMOD_RCLK_512FS (1 << 3) -#define S3C2412_IISMOD_RCLK_384FS (2 << 3) -#define S3C2412_IISMOD_RCLK_768FS (3 << 3) -#define S3C2412_IISMOD_RCLK_MASK (3 << 3) -#define S3C2412_IISMOD_BCLK_32FS (0 << 1) -#define S3C2412_IISMOD_BCLK_48FS (1 << 1) -#define S3C2412_IISMOD_BCLK_16FS (2 << 1) -#define S3C2412_IISMOD_BCLK_24FS (3 << 1) -#define S3C2412_IISMOD_BCLK_MASK (3 << 1) -#define S3C2412_IISMOD_8BIT (1 << 0) - -#define S3C2412_IISPSR_PSREN (1 << 15) - -#define S3C2412_IISFIC_TXFLUSH (1 << 15) -#define S3C2412_IISFIC_RXFLUSH (1 << 7) -#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) -#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) - - - -#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ - diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 45bb12e8ea44..286ff4497fd8 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -33,7 +33,7 @@ #include #include -#include +#include #include "../codecs/wm8753.h" #include "lm4857.h" diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index f3fc0aba0aaf..36b927d3f54a 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -30,10 +31,7 @@ #include #include -#include -#include - -#include +#include #include #include diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index 6f4d439b57aa..2569b910b9b2 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include "s3c24xx-pcm.h" #include "s3c24xx-i2s.h" diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c index a0a4d1832a14..8e79a416db57 100644 --- a/sound/soc/s3c24xx/s3c24xx_uda134x.c +++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c @@ -22,7 +22,7 @@ #include #include -#include +#include #include "s3c24xx-pcm.h" #include "s3c24xx-i2s.h" -- cgit v1.2.3 From 899e6cf5e6d83a91d2e257f7a4e8ca98db3831cc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 4 Mar 2009 00:49:28 +0000 Subject: S3C: Move to The file needs to be common to both ARCH_S3C2410 and ARCH_S3C64XX as they share common driver code, so move it to . Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- arch/arm/mach-s3c2410/include/mach/audio.h | 45 ------------------------------ arch/arm/plat-s3c/include/plat/audio.h | 45 ++++++++++++++++++++++++++++++ sound/soc/s3c24xx/neo1973_wm8753.c | 2 +- sound/soc/s3c24xx/s3c2412-i2s.c | 2 +- sound/soc/s3c24xx/s3c2443-ac97.c | 2 +- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx-pcm.c | 2 +- 7 files changed, 50 insertions(+), 50 deletions(-) delete mode 100644 arch/arm/mach-s3c2410/include/mach/audio.h create mode 100644 arch/arm/plat-s3c/include/plat/audio.h diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h deleted file mode 100644 index de0e8da48bc3..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/audio.h +++ /dev/null @@ -1,45 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/audio.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Ben Dooks - * - * S3C24XX - Audio platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_AUDIO_H -#define __ASM_ARCH_AUDIO_H __FILE__ - -/* struct s3c24xx_iis_ops - * - * called from the s3c24xx audio core to deal with the architecture - * or the codec's setup and control. - * - * the pointer to itself is passed through in case the caller wants to - * embed this in an larger structure for easy reference to it's context. -*/ - -struct s3c24xx_iis_ops { - struct module *owner; - - int (*startup)(struct s3c24xx_iis_ops *me); - void (*shutdown)(struct s3c24xx_iis_ops *me); - int (*suspend)(struct s3c24xx_iis_ops *me); - int (*resume)(struct s3c24xx_iis_ops *me); - - int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); - int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); - int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt); -}; - -struct s3c24xx_platdata_iis { - const char *codec_clk; - struct s3c24xx_iis_ops *ops; - int (*match_dev)(struct device *dev); -}; - -#endif /* __ASM_ARCH_AUDIO_H */ diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-s3c/include/plat/audio.h new file mode 100644 index 000000000000..de0e8da48bc3 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/audio.h @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/include/mach/audio.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks + * + * S3C24XX - Audio platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_AUDIO_H +#define __ASM_ARCH_AUDIO_H __FILE__ + +/* struct s3c24xx_iis_ops + * + * called from the s3c24xx audio core to deal with the architecture + * or the codec's setup and control. + * + * the pointer to itself is passed through in case the caller wants to + * embed this in an larger structure for easy reference to it's context. +*/ + +struct s3c24xx_iis_ops { + struct module *owner; + + int (*startup)(struct s3c24xx_iis_ops *me); + void (*shutdown)(struct s3c24xx_iis_ops *me); + int (*suspend)(struct s3c24xx_iis_ops *me); + int (*resume)(struct s3c24xx_iis_ops *me); + + int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); + int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); + int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt); +}; + +struct s3c24xx_platdata_iis { + const char *codec_clk; + struct s3c24xx_iis_ops *ops; + int (*match_dev)(struct device *dev); +}; + +#endif /* __ASM_ARCH_AUDIO_H */ diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 286ff4497fd8..40530fc7fbad 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index 36b927d3f54a..3297698ff294 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include "s3c24xx-pcm.h" diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c index 5822d2dd49ba..5c7f18a22645 100644 --- a/sound/soc/s3c24xx/s3c2443-ac97.c +++ b/sound/soc/s3c24xx/s3c2443-ac97.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index 2569b910b9b2..a7312e4fe4a1 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 7c64d31d067e..bfea13f3ba73 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include "s3c24xx-pcm.h" -- cgit v1.2.3 From e7d3ef13d52a126438f687a1a32da65ff926ed57 Mon Sep 17 00:00:00 2001 From: Stuart Hayes Date: Wed, 4 Mar 2009 11:59:46 -0800 Subject: libata: change drive ready wait after hard reset to 5s This fixes problems during resume with drives that take longer than 1s to be ready. The ATA-6 spec appears to allow 5 seconds for a drive to be ready. On one affected system, this patch changes "PM: resume devices took..." message from 17 seconds to 4 seconds, and gets rid of a lot of ugly timeout/error messages. Without this patch, the libata code moves on after 1s, tries to send a soft reset (which the drive doesn't see because it isn't ready) which also times out, then an IDENTIFY command is sent to the drive which times out, and finally the error handler will try to send another hard reset which will finally get things working. Signed-off-by: Stuart Hayes Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 5d87bc09a1f5..dd818c7decd7 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -275,7 +275,7 @@ enum { * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1000, + ATA_TMOUT_PMP_SRST_WAIT = 5000, /* ATA bus states */ BUS_UNKNOWN = 0, -- cgit v1.2.3 From 5825627c9463581fd9e70f8285685889ae5bb9bb Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 27 Feb 2009 17:35:43 +0900 Subject: libata: fix dma_unmap_sg misuse libata passes the returned value of dma_map_sg() to dma_unmap_sg(),which is the misuse of dma_unmap_sg(). DMA-mapping.txt says: To unmap a scatterlist, just call: pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be the _same_ one you passed into the pci_map_sg call, it should _NOT_ be the 'count' value _returned_ from the pci_map_sg call. Signed-off-by: FUJITA Tomonori Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++-- include/linux/libata.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9fbf0595f3d4..5e324cea3019 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4612,7 +4612,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) VPRINTK("unmapping %u sg elements\n", qc->n_elem); if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir); qc->flags &= ~ATA_QCFLAG_DMAMAP; qc->sg = NULL; @@ -4727,7 +4727,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) return -1; DPRINTK("%d sg elements mapped\n", n_elem); - + qc->orig_n_elem = qc->n_elem; qc->n_elem = n_elem; qc->flags |= ATA_QCFLAG_DMAMAP; diff --git a/include/linux/libata.h b/include/linux/libata.h index dd818c7decd7..fbf064e13ad5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -530,6 +530,7 @@ struct ata_queued_cmd { unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; unsigned int n_elem; + unsigned int orig_n_elem; int dma_dir; -- cgit v1.2.3 From 84bda12af31f930e4200c5244aa111de2485d7b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 2 Mar 2009 18:53:26 +0900 Subject: libata: align ap->sector_buf ap->sector_buf is used as DMA target and should at least be aligned on cacheline. This caused problems on some embedded machines. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index fbf064e13ad5..dc18b87ed722 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -751,7 +751,8 @@ struct ata_port { acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif - u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ + /* owned by EH */ + u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; /* The following initializer overrides a method to NULL whether one of -- cgit v1.2.3 From b53570814692db79c3525523b6e9ec9874416c04 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 2 Mar 2009 18:55:16 +0900 Subject: libata: don't use on-stack sense buffer sense_buffer is used as DMA target and shouldn't be allocated on stack. Use ap->sector_buf instead. This problem is spotted by Chuck Ebbert. Signed-off-by: Tejun Heo Reported-by: Chuck Ebbert Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ce2ef0475339..009ccc7c9865 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2901,7 +2901,7 @@ static int atapi_eh_clear_ua(struct ata_device *dev) int i; for (i = 0; i < ATA_EH_UA_TRIES; i++) { - u8 sense_buffer[SCSI_SENSE_BUFFERSIZE]; + u8 *sense_buffer = dev->link->ap->sector_buf; u8 sense_key = 0; unsigned int err_mask; -- cgit v1.2.3 From 7adbe46b9289794f8fe629cd78c876169741177f Mon Sep 17 00:00:00 2001 From: peerchen Date: Fri, 27 Feb 2009 16:58:41 +0800 Subject: ahci: Add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c Added the Device IDs for MCP89 AHCI controller. Removed the IDs of MCP7B because this chipset had been cancelled. Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a603bbf9b1b7..66e012cd3271 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -582,18 +582,18 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */ - { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ -- cgit v1.2.3 From 55f784c826af2506e417bcc484d7e0e4d27f1977 Mon Sep 17 00:00:00 2001 From: Brandon Ehle Date: Sun, 1 Mar 2009 00:02:49 -0800 Subject: sata_nv: fix module parameter description Update MODULE_PARM_DESC for ADMA to reflect the fact that the option is disabled by default. Signed-off-by: Brandon Ehle Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 55a8eed3f3a3..f65b53785a8f 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -2523,7 +2523,7 @@ static void __exit nv_exit(void) module_init(nv_init); module_exit(nv_exit); module_param_named(adma, adma_enabled, bool, 0444); -MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)"); +MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)"); module_param_named(swncq, swncq_enabled, bool, 0444); MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)"); -- cgit v1.2.3 From d6515e6ff4ad3db4bd5ef2dd4e1026a7aca2482e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 4 Mar 2009 15:59:30 +0900 Subject: libata: make sure port is thawed when skipping resets When SCR access is available and the link is offline, softreset is skipped as it only wastes time and some controllers don't respond very well. However, the skip path forgot to thaw the port, which not only blocks further event notification from the port but also causes repeated EH invocations on the same event on drivers which rely on ->thaw() to clear events if the IRQ is shared with another device or port. This problem has always been there but is uncovered by recent sata_nv nf2/3 change which dropped hardreset support while maintaining SCR access. nf2/3 doesn't clear hotplug event mask from the interrupt handler but relies on ->thaw() to clear them. When the hardreset was there, the reset action was never skipped and the port was always thawed but, with the hardreset gone, ->prereset() determines that there's no need for softreset and both ->softreset() and ->thaw() are skipped. This leads to stuck hotplug event in the IRQ status register triggering hotplug event whenever IRQ is delieverd on the same IRQ. As the controller shares the same IRQ for both ports, this happens on every IO if one port is occpupied and the other isn't. This patch fixes the problem by making sure that the port is thawed on reset-skip path. bko#11615 reports this problem. Signed-off-by: Tejun Heo Cc: Robert Hancock Reported-by: Dan Andresan Reported-by: Arne Woerner Reported-by: Stefan Lippers-Hollmann Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 009ccc7c9865..ea890911d4fa 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2423,11 +2423,14 @@ int ata_eh_reset(struct ata_link *link, int classify, } /* prereset() might have cleared ATA_EH_RESET. If so, - * bang classes and return. + * bang classes, thaw and return. */ if (reset && !(ehc->i.action & ATA_EH_RESET)) { ata_for_each_dev(dev, link, ALL) classes[dev->devno] = ATA_DEV_NONE; + if ((ap->pflags & ATA_PFLAG_FROZEN) && + ata_is_host_link(link)) + ata_eh_thaw_port(ap); rc = 0; goto out; } -- cgit v1.2.3 From 968e594afdbc40b4270f9d4032ae8350475749d6 Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Mon, 16 Feb 2009 20:15:08 -0600 Subject: libata: Don't trust current capacity values in identify words 57-58 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive was reported as 1.1TB in capacity by libata: http://lkml.org/lkml/2009/2/13/134 This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the current CHS translation values appear valid. Unfortunately it seems older ATA specs were vague about what this field should contain and a number of drives used values with wrong byte order or that were totally bogus. There's no unique information that it conveys and so we can just calculate the number of sectors from the reported current CHS values. While we're at it, clean up this function to use named constants for the identify word values. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5e324cea3019..060bcd601f57 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1322,14 +1322,16 @@ static u64 ata_id_n_sectors(const u16 *id) { if (ata_id_has_lba(id)) { if (ata_id_has_lba48(id)) - return ata_id_u64(id, 100); + return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); else - return ata_id_u32(id, 60); + return ata_id_u32(id, ATA_ID_LBA_CAPACITY); } else { if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); + return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] * + id[ATA_ID_CUR_SECTORS]; else - return id[1] * id[3] * id[6]; + return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * + id[ATA_ID_SECTORS]; } } -- cgit v1.2.3 From f03d3115a6bcb814019d945c50c2ef91e5f14477 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Mar 2009 14:18:16 +0100 Subject: ALSA: Fix sample rate of Lenovo Ideapad to 44.1kHz Noises can be heard on analog outputs of (some model of) Lenovo Ideapad due to the hardware problem, and the only workaround right now is to fix the sample rate to 44.1kHz. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6325ea43cf08..b794cba494c3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12845,6 +12845,27 @@ static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec, #define alc269_pcm_digital_playback alc880_pcm_digital_playback #define alc269_pcm_digital_capture alc880_pcm_digital_capture +static struct hda_pcm_stream alc269_44k_pcm_analog_playback = { + .substreams = 1, + .channels_min = 2, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_44100, /* fixed rate */ + /* NID is set in alc_build_pcms */ + .ops = { + .open = alc880_playback_pcm_open, + .prepare = alc880_playback_pcm_prepare, + .cleanup = alc880_playback_pcm_cleanup + }, +}; + +static struct hda_pcm_stream alc269_44k_pcm_analog_capture = { + .substreams = 1, + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_44100, /* fixed rate */ + /* NID is set in alc_build_pcms */ +}; + /* * BIOS auto configuration */ @@ -13060,9 +13081,16 @@ static int patch_alc269(struct hda_codec *codec) setup_preset(spec, &alc269_presets[board_config]); spec->stream_name_analog = "ALC269 Analog"; - spec->stream_analog_playback = &alc269_pcm_analog_playback; - spec->stream_analog_capture = &alc269_pcm_analog_capture; - + if (codec->subsystem_id == 0x17aa3bf8) { + /* Due to a hardware problem on Lenovo Ideadpad, we need to + * fix the sample rate of analog I/O to 44.1kHz + */ + spec->stream_analog_playback = &alc269_44k_pcm_analog_playback; + spec->stream_analog_capture = &alc269_44k_pcm_analog_capture; + } else { + spec->stream_analog_playback = &alc269_pcm_analog_playback; + spec->stream_analog_capture = &alc269_pcm_analog_capture; + } spec->stream_name_digital = "ALC269 Digital"; spec->stream_digital_playback = &alc269_pcm_digital_playback; spec->stream_digital_capture = &alc269_pcm_digital_capture; -- cgit v1.2.3 From d4cc510c61b050ef38e842a12feef71c56d7cf81 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 4 Mar 2009 11:48:46 +0100 Subject: [ARM] 5418/1: restore lr before leaving mcount MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc seems to expect that lr isn't clobbered by mcount, because for a function starting with: static int func(void) { void *ra = __builtin_return_address(0); printk(KERN_EMERG "__builtin_return_address(0) = %pS\n", ra) ... the following assembler is generated by gcc 4.3.2: 0: e1a0c00d mov ip, sp 4: e92dd810 push {r4, fp, ip, lr, pc} 8: e24cb004 sub fp, ip, #4 ; 0x4 c: ebfffffe bl 0 10: e59f0034 ldr r0, [pc, #52] 14: e1a0100e mov r1, lr 18: ebfffffe bl 0 Without this patch obviously __builtin_return_address(0) yields func+0x10 instead of the return address of the caller. Note this patch fixes a similar issue for the routines used with dynamic ftrace even though this isn't currently selectable for ARM. Cc: Abhishek Sagar Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 49a6ba926c2b..159d0416f270 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -111,6 +111,7 @@ ENTRY(mcount) .globl mcount_call mcount_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} ENTRY(ftrace_caller) @@ -122,6 +123,7 @@ ENTRY(ftrace_caller) .globl ftrace_call ftrace_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #else @@ -133,6 +135,7 @@ ENTRY(mcount) adr r0, ftrace_stub cmp r0, r2 bne trace + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} trace: @@ -141,6 +144,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 + mov lr, r1 @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit v1.2.3 From b02c387892fc6b3cc59c78ab2f79413d55f50190 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 12 Feb 2009 13:42:41 +0300 Subject: [WATCHDOG] ks8695_wdt.c: 'CLOCK_TICK_RATE' undeclared On arm-acs5k_tiny: drivers/watchdog/ks8695_wdt.c:68: error: 'CLOCK_TICK_RATE' undeclared (first use in this function) Signed-off-by: Alexey Dobriyan Signed-off-by: Wim Van Sebroeck Cc: stable --- drivers/watchdog/ks8695_wdt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 0b798fdaa378..74c92d384112 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #define WDT_DEFAULT_TIME 5 /* seconds */ -- cgit v1.2.3 From 26952669f01646c3e7d0832c99b310b199fe2b20 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 3 Mar 2009 15:10:05 +0100 Subject: [WATCHDOG] gef_wdt.c: fsl_get_sys_freq() failure not noticed fsl_get_sys_freq() may return -1 when 'soc' isn't found, but in gef_wdt_probe() 'freq' is unsigned, so the test doesn't catch that. Signed-off-by: Roel Kluin Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/gef_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index f0c2b7a1a175..734d9806a872 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c @@ -269,7 +269,7 @@ static int __devinit gef_wdt_probe(struct of_device *dev, bus_clk = 133; /* in MHz */ freq = fsl_get_sys_freq(); - if (freq > 0) + if (freq != -1) bus_clk = freq; /* Map devices registers into memory */ -- cgit v1.2.3 From e0c6dcd8d4257a129fc813ac68f20b77c6ae2a7a Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 5 Mar 2009 16:10:55 +0100 Subject: ide: expiry() returns int, negative expiry() return values won't be noticed bart: It seems like the bug could cause insanely long timeouts for: - ATA_DMA_ERR error in dma_timer_expiry() - commands without ->expiry in tc86c001_timer_expiry() (TC86C001 IDE controller only) Signed-off-by: Roel Kluin Cc: Sergei Shtylyov Cc: Andrew Morton [bart: port it to the current tree] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9ee51adf567f..9ff90cb1dbf1 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -908,7 +908,7 @@ void ide_timer_expiry (unsigned long data) ide_drive_t *uninitialized_var(drive); ide_handler_t *handler; unsigned long flags; - unsigned long wait = -1; + int wait = -1; int plug_device = 0; spin_lock_irqsave(&hwif->lock, flags); -- cgit v1.2.3 From 71bfc7a7c73eaf1f99e309dba60822ba050e3ec5 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Thu, 5 Mar 2009 16:10:56 +0100 Subject: ide: NULL noise: drivers/ide/ide-*.c Fix this sparse warnings: drivers/ide/ide-disk_proc.c:130:11: warning: Using plain integer as NULL pointer drivers/ide/ide-floppy_proc.c:32:11: warning: Using plain integer as NULL pointer drivers/ide/ide-proc.c:234:11: warning: Using plain integer as NULL pointer drivers/ide/ide-tape.c:2141:11: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder Cc: trivial@kernel.org Cc: kernel-janitors@vger.kernel.org Cc: Al Viro Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk_proc.c | 2 +- drivers/ide/ide-floppy_proc.c | 2 +- drivers/ide/ide-proc.c | 2 +- drivers/ide/ide-tape.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index 1146f4204c6e..1f86dcbd2b1c 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -125,5 +125,5 @@ const struct ide_proc_devset ide_disk_settings[] = { IDE_PROC_DEVSET(multcount, 0, 16), IDE_PROC_DEVSET(nowerr, 0, 1), IDE_PROC_DEVSET(wcache, 0, 1), - { 0 }, + { NULL }, }; diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c index 3ec762cb60ab..fcd4d8153df5 100644 --- a/drivers/ide/ide-floppy_proc.c +++ b/drivers/ide/ide-floppy_proc.c @@ -29,5 +29,5 @@ const struct ide_proc_devset ide_floppy_settings[] = { IDE_PROC_DEVSET(bios_head, 0, 255), IDE_PROC_DEVSET(bios_sect, 0, 63), IDE_PROC_DEVSET(ticks, 0, 255), - { 0 }, + { NULL }, }; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 1d8978b3314a..a7b9287ee0d4 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -231,7 +231,7 @@ static const struct ide_proc_devset ide_generic_settings[] = { IDE_PROC_DEVSET(pio_mode, 0, 255), IDE_PROC_DEVSET(unmaskirq, 0, 1), IDE_PROC_DEVSET(using_dma, 0, 1), - { 0 }, + { NULL }, }; static void proc_ide_settings_warn(void) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bb450a7608c2..4e6181c7bbda 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2166,7 +2166,7 @@ static const struct ide_proc_devset idetape_settings[] = { __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, mulf_tdsc, divf_tdsc), - { 0 }, + { NULL }, }; #endif -- cgit v1.2.3 From a509538d4fb4f99cdf0a095213d57cc3b2347615 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 5 Mar 2009 16:10:56 +0100 Subject: ide-iops: fix odd-length ATAPI PIO transfers Commit 9567b349f7e7dd7e2483db99ee8e4a6fe0caca38 (ide: merge ->atapi_*put_bytes and ->ata_*put_data methods) introduced a regression WRT the odd-length ATAPI PIO transfers -- the final word didn't get written (causing command timeouts). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 753b92ebe0ae..b1892bd95c6f 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -315,6 +315,8 @@ void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf, u8 io_32bit = drive->io_32bit; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + len++; + if (io_32bit) { unsigned long uninitialized_var(flags); -- cgit v1.2.3 From 849d7130001ab740a5a4778a561049841fdd77c9 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 5 Mar 2009 16:10:57 +0100 Subject: ide: allow to wrap interrupt handler Signed-off-by: Stanislaw Gruszka Cc: Andrew Victor [bart: minor checkpatch.pl / CodingStyle fixups] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 1 + drivers/ide/ide-probe.c | 7 ++++++- include/linux/ide.h | 1 + 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9ff90cb1dbf1..a9a6c208288a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1162,6 +1162,7 @@ out_early: return irq_ret; } +EXPORT_SYMBOL_GPL(ide_intr); /** * ide_do_drive_cmd - issue IDE special command diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index ce0818a993f6..ee8e3e7cad51 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -950,6 +950,7 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) static int init_irq (ide_hwif_t *hwif) { struct ide_io_ports *io_ports = &hwif->io_ports; + irq_handler_t irq_handler; int sa = 0; mutex_lock(&ide_cfg_mtx); @@ -959,6 +960,10 @@ static int init_irq (ide_hwif_t *hwif) hwif->timer.function = &ide_timer_expiry; hwif->timer.data = (unsigned long)hwif; + irq_handler = hwif->host->irq_handler; + if (irq_handler == NULL) + irq_handler = ide_intr; + #if defined(__mc68000__) sa = IRQF_SHARED; #endif /* __mc68000__ */ @@ -969,7 +974,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) hwif->tp_ops->set_irq(hwif, 1); - if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif)) + if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; if (!hwif->rqsize) { diff --git a/include/linux/ide.h b/include/linux/ide.h index fe235b65207e..e0cedfe9fad4 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -866,6 +866,7 @@ struct ide_host { unsigned int n_ports; struct device *dev[2]; unsigned int (*init_chipset)(struct pci_dev *); + irq_handler_t irq_handler; unsigned long host_flags; void *host_priv; ide_hwif_t *cur_port; /* for hosts requiring serialization */ -- cgit v1.2.3 From 6e5f1e1115bb041993f9f247036996364b4c84d5 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 5 Mar 2009 16:10:58 +0100 Subject: ide: add at91_ide driver This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller with Compact Flash True IDE Mode logic. Driver have to switch 8/16 bit bus width when accessing Task Tile or Data Register. Moreover some extra things need to be done when setting PIO mode. Only PIO mode is used, hardware have no DMA support. If interrupt line is connected through GPIO extra quirk is needed to cope with fake interrupts. Signed-off-by: Stanislaw Gruszka Cc: Andrew Victor Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/arm/mach-at91/include/mach/board.h | 3 + drivers/ide/Kconfig | 5 + drivers/ide/Makefile | 1 + drivers/ide/at91_ide.c | 467 ++++++++++++++++++++++++++++++++ 4 files changed, 476 insertions(+) create mode 100644 drivers/ide/at91_ide.c diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 0b3ae21b4565..793fe7b25f36 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -56,6 +56,9 @@ struct at91_cf_data { u8 vcc_pin; /* power switching */ u8 rst_pin; /* card reset */ u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 }; extern void __init at91_add_device_cf(struct at91_cf_data *data); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e072903b12f0..5ea3bfad172a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -721,6 +721,11 @@ config BLK_DEV_IDE_TX4939 depends on SOC_TX4939 select BLK_DEV_IDEDMA_SFF +config BLK_DEV_IDE_AT91 + tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support" + depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40 + select IDE_TIMINGS + config IDE_ARM tristate "ARM IDE support" depends on ARM && (ARCH_RPC || ARCH_SHARK) diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index d0e3d7d5b467..1c326d94aa6d 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -116,3 +116,4 @@ obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o +obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c new file mode 100644 index 000000000000..1bb50f46388d --- /dev/null +++ b/drivers/ide/at91_ide.c @@ -0,0 +1,467 @@ +/* + * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller + * with Compact Flash True IDE logic + * + * Copyright (c) 2008, 2009 Kelvatek Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "at91_ide" + +#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args) +#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args) + +/* + * Access to IDE device is possible through EBI Static Memory Controller + * with Compact Flash logic. For details see EBI and SMC datasheet sections + * of any microcontroller from AT91SAM9 family. + * + * Within SMC chip select address space, lines A[23:21] distinguish Compact + * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are: + * 0x00c0000 - True IDE + * 0x00e0000 - Alternate True IDE (Alt Status Register) + * + * On True IDE mode Task File and Data Register are mapped at the same address. + * To distinguish access between these two different bus data width is used: + * 8Bit for Task File, 16Bit for Data I/O. + * + * After initialization we do 8/16 bit flipping (changes in SMC MODE register) + * only inside IDE callback routines which are serialized by IDE layer, + * so no additional locking needed. + */ + +#define TASK_FILE 0x00c00000 +#define ALT_MODE 0x00e00000 +#define REGS_SIZE 8 + +#define enter_16bit(cs, mode) do { \ + mode = at91_sys_read(AT91_SMC_MODE(cs)); \ + at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \ +} while (0) + +#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode); + +static void set_smc_timings(const u8 chipselect, const u16 cycle, + const u16 setup, const u16 pulse, + const u16 data_float, int use_iordy) +{ + unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_BAT_SELECT; + + /* disable or enable waiting for IORDY signal */ + if (use_iordy) + mode |= AT91_SMC_EXNWMODE_READY; + + /* add data float cycles if needed */ + if (data_float) + mode |= AT91_SMC_TDF_(data_float); + + at91_sys_write(AT91_SMC_MODE(chipselect), mode); + + /* setup timings in SMC */ + at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) | + AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(setup) | + AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) | + AT91_SMC_NCS_WRPULSE_(cycle) | + AT91_SMC_NRDPULSE_(pulse) | + AT91_SMC_NCS_RDPULSE_(cycle)); + at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) | + AT91_SMC_NRDCYCLE_(cycle)); +} + +static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) +{ + u64 tmp = ns; + + tmp *= mck_hz; + tmp += 1000*1000*1000 - 1; /* round up */ + do_div(tmp, 1000*1000*1000); + return (unsigned int) tmp; +} + +static void apply_timings(const u8 chipselect, const u8 pio, + const struct ide_timing *timing, int use_iordy) +{ + unsigned int t0, t1, t2, t6z; + unsigned int cycle, setup, pulse, data_float; + unsigned int mck_hz; + struct clk *mck; + + /* see table 22 of Compact Flash standard 4.1 for the meaning, + * we do not stretch active (t2) time, so setup (t1) + hold time (th) + * assure at least minimal recovery (t2i) time */ + t0 = timing->cyc8b; + t1 = timing->setup; + t2 = timing->act8b; + t6z = (pio < 5) ? 30 : 20; + + pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z); + + mck = clk_get(NULL, "mck"); + BUG_ON(IS_ERR(mck)); + mck_hz = clk_get_rate(mck); + pdbg("mck_hz=%u\n", mck_hz); + + cycle = calc_mck_cycles(t0, mck_hz); + setup = calc_mck_cycles(t1, mck_hz); + pulse = calc_mck_cycles(t2, mck_hz); + data_float = calc_mck_cycles(t6z, mck_hz); + + pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n", + cycle, setup, pulse, data_float); + + set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy); +} + +static void at91_ide_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 chipselect = hwif->select_data; + unsigned long mode; + + pdbg("cs %u buf %p len %d\n", chipselect, buf, len); + + len++; + + enter_16bit(chipselect, mode); + __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2); + leave_16bit(chipselect, mode); +} + +static void at91_ide_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 chipselect = hwif->select_data; + unsigned long mode; + + pdbg("cs %u buf %p len %d\n", chipselect, buf, len); + + enter_16bit(chipselect, mode); + __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2); + leave_16bit(chipselect, mode); +} + +static u8 ide_mm_inb(unsigned long port) +{ + return readb((void __iomem *) port); +} + +static void ide_mm_outb(u8 value, unsigned long port) +{ + writeb(value, (void __iomem *) port); +} + +static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) { + u16 data = (tf->hob_data << 8) | tf->data; + + at91_ide_output_data(drive, NULL, &data, 2); + } + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + ide_mm_outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + ide_mm_outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + ide_mm_outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + ide_mm_outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + ide_mm_outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + ide_mm_outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); +} + +static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data; + + at91_ide_input_data(drive, NULL, &data, 2); + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_FEATURE) + tf->feature = ide_mm_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = ide_mm_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = ide_mm_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = ide_mm_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = ide_mm_inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = ide_mm_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = ide_mm_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr); + } +} + +static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + struct ide_timing *timing; + u8 chipselect = drive->hwif->select_data; + int use_iordy = 0; + + pdbg("chipselect %u pio %u\n", chipselect, pio); + + timing = ide_timing_find_mode(XFER_PIO_0 + pio); + BUG_ON(!timing); + + if ((pio > 2 || ata_id_has_iordy(drive->id)) && + !(ata_id_is_cfa(drive->id) && pio > 4)) + use_iordy = 1; + + apply_timings(chipselect, pio, timing, use_iordy); +} + +static const struct ide_tp_ops at91_ide_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .set_irq = ide_set_irq, + + .tf_load = at91_ide_tf_load, + .tf_read = at91_ide_tf_read, + + .input_data = at91_ide_input_data, + .output_data = at91_ide_output_data, +}; + +static const struct ide_port_ops at91_ide_port_ops = { + .set_pio_mode = at91_ide_set_pio_mode, +}; + +static const struct ide_port_info at91_ide_port_info __initdata = { + .port_ops = &at91_ide_port_ops, + .tp_ops = &at91_ide_tp_ops, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE | + IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO5, +}; + +/* + * If interrupt is delivered through GPIO, IRQ are triggered on falling + * and rising edge of signal. Whereas IDE device request interrupt on high + * level (rising edge in our case). This mean we have fake interrupts, so + * we need to check interrupt pin and exit instantly from ISR when line + * is on low level. + */ + +irqreturn_t at91_irq_handler(int irq, void *dev_id) +{ + int ntries = 8; + int pin_val1, pin_val2; + + /* additional deglitch, line can be noisy in badly designed PCB */ + do { + pin_val1 = at91_get_gpio_value(irq); + pin_val2 = at91_get_gpio_value(irq); + } while (pin_val1 != pin_val2 && --ntries > 0); + + if (pin_val1 == 0 || ntries <= 0) + return IRQ_HANDLED; + + return ide_intr(irq, dev_id); +} + +static int __init at91_ide_probe(struct platform_device *pdev) +{ + int ret; + hw_regs_t hw; + hw_regs_t *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_host *host; + struct resource *res; + unsigned long tf_base = 0, ctl_base = 0; + struct at91_cf_data *board = pdev->dev.platform_data; + + if (!board) + return -ENODEV; + + if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) { + perr("no device detected\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + perr("can't get memory resource\n"); + return -ENODEV; + } + + if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE, + REGS_SIZE, "ide") || + !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE, + REGS_SIZE, "alt")) { + perr("memory resources in use\n"); + return -EBUSY; + } + + pdbg("chipselect %u irq %u res %08lx\n", board->chipselect, + board->irq_pin, (unsigned long) res->start); + + tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE, + REGS_SIZE); + ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE, + REGS_SIZE); + if (!tf_base || !ctl_base) { + perr("can't map memory regions\n"); + return -EBUSY; + } + + memset(&hw, 0, sizeof(hw)); + + if (board->flags & AT91_IDE_SWAP_A0_A2) { + /* workaround for stupid hardware bug */ + hw.io_ports.data_addr = tf_base + 0; + hw.io_ports.error_addr = tf_base + 4; + hw.io_ports.nsect_addr = tf_base + 2; + hw.io_ports.lbal_addr = tf_base + 6; + hw.io_ports.lbam_addr = tf_base + 1; + hw.io_ports.lbah_addr = tf_base + 5; + hw.io_ports.device_addr = tf_base + 3; + hw.io_ports.command_addr = tf_base + 7; + hw.io_ports.ctl_addr = ctl_base + 3; + } else + ide_std_init_ports(&hw, tf_base, ctl_base + 6); + + hw.irq = board->irq_pin; + hw.chipset = ide_generic; + hw.dev = &pdev->dev; + + host = ide_host_alloc(&at91_ide_port_info, hws); + if (!host) { + perr("failed to allocate ide host\n"); + return -ENOMEM; + } + + /* setup Static Memory Controller - PIO 0 as default */ + apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0); + + /* with GPIO interrupt we have to do quirks in handler */ + if (board->irq_pin >= PIN_BASE) + host->irq_handler = at91_irq_handler; + + host->ports[0]->select_data = board->chipselect; + + ret = ide_host_register(host, &at91_ide_port_info, hws); + if (ret) { + perr("failed to register ide host\n"); + goto err_free_host; + } + platform_set_drvdata(pdev, host); + return 0; + +err_free_host: + ide_host_free(host); + return ret; +} + +static int __exit at91_ide_remove(struct platform_device *pdev) +{ + struct ide_host *host = platform_get_drvdata(pdev); + + ide_host_remove(host); + return 0; +} + +static struct platform_driver at91_ide_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .remove = __exit_p(at91_ide_remove), +}; + +static int __init at91_ide_init(void) +{ + return platform_driver_probe(&at91_ide_driver, at91_ide_probe); +} + +static void __exit at91_ide_exit(void) +{ + platform_driver_unregister(&at91_ide_driver); +} + +module_init(at91_ide_init); +module_exit(at91_ide_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Stanislaw Gruszka "); + -- cgit v1.2.3 From e565f206082a725108a75bcf00bbe3db21a56474 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 5 Mar 2009 16:10:58 +0100 Subject: AT91: initialize Compact Flash on AT91SAM9263 cpu Signed-off-by: Stanislaw Gruszka Cc: Andrew Victor Acked-by: Sergei Shtylyov Acked-by: Andrew Victor Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/arm/mach-at91/at91sam9263_devices.c | 105 +++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 134af97ff340..b7f233242315 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif +/* -------------------------------------------------------------------- + * Compact Flash (PCMCIA or IDE) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ + defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) + +static struct at91_cf_data cf0_data; + +static struct resource cf0_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_4, + .end = AT91_CHIPSELECT_4 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + } +}; + +static struct platform_device cf0_device = { + .id = 0, + .dev = { + .platform_data = &cf0_data, + }, + .resource = cf0_resources, + .num_resources = ARRAY_SIZE(cf0_resources), +}; + +static struct at91_cf_data cf1_data; + +static struct resource cf1_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_5, + .end = AT91_CHIPSELECT_5 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + } +}; + +static struct platform_device cf1_device = { + .id = 1, + .dev = { + .platform_data = &cf1_data, + }, + .resource = cf1_resources, + .num_resources = ARRAY_SIZE(cf1_resources), +}; + +void __init at91_add_device_cf(struct at91_cf_data *data) +{ + unsigned long ebi0_csa; + struct platform_device *pdev; + + if (!data) + return; + + /* + * assign CS4 or CS5 to SMC with Compact Flash logic support, + * we assume SMC timings are configured by board code, + * except True IDE where timings are controlled by driver + */ + ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + switch (data->chipselect) { + case 4: + at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ + ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1; + cf0_data = *data; + pdev = &cf0_device; + break; + case 5: + at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */ + ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2; + cf1_data = *data; + pdev = &cf1_device; + break; + default: + printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", + data->chipselect); + return; + } + at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + + if (data->irq_pin) { + at91_set_gpio_input(data->irq_pin, 1); + at91_set_deglitch(data->irq_pin, 1); + } + + if (data->vcc_pin) + /* initially off */ + at91_set_gpio_output(data->vcc_pin, 0); + + /* enable EBI controlled pins */ + at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */ + at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */ + at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ + at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ + + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + platform_device_register(pdev); +} +#else +void __init at91_add_device_cf(struct at91_cf_data *data) {} +#endif /* -------------------------------------------------------------------- * NAND / SmartMedia -- cgit v1.2.3 From ebcad5aaea26da3cb2ca90b7f31a67a027eb60db Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 5 Mar 2009 16:10:59 +0100 Subject: remove stale comment from HDIO_GET_IDENTITY returns 256 words currently. Noticed by Norman Diamond. Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/hdreg.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index c37e9241fae7..ed21bd3dbd25 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -511,7 +511,6 @@ struct hd_driveid { unsigned short words69_70[2]; /* reserved words 69-70 * future command overlap and queuing */ - /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */ unsigned short words71_74[4]; /* reserved words 71-74 * for IDENTIFY PACKET DEVICE command */ -- cgit v1.2.3 From 7dbc3f6ead13cb87d2318443ebd8f19a987149aa Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Mar 2009 00:20:49 +0800 Subject: Blackfin arch: add stubs for anomalies 447 and 448 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf527/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf533/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf537/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf538/include/mach/anomaly.h | 2 ++ arch/blackfin/mach-bf561/include/mach/anomaly.h | 2 ++ 6 files changed, 12 insertions(+) diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 143a29dfe870..c847bb101076 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -86,5 +86,7 @@ #define ANOMALY_05000386 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 4ffccb6de52d..df6808d8a6ef 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -176,5 +176,7 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) #define ANOMALY_05000412 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 9e838f851720..1cf893e2e55b 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -283,5 +283,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 438b43ffd41e..1bfd80c26c90 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -173,5 +173,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index f4ece1cfca43..3a5699827363 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -130,5 +130,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index d78bc6b49e61..d0b0b3506440 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -287,5 +287,7 @@ #define ANOMALY_05000386 (1) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif -- cgit v1.2.3 From d42ad15b759d05a87f22b484af63987eff38ea88 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 5 Mar 2009 17:20:55 +0100 Subject: ata: add CFA specific identify data words Declare CFA specific identify data words 162 and 163 for future use. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik [bart: update patch summary/description] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ata.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/ata.h b/include/linux/ata.h index 08a86d5cdf1b..9a061accd8b8 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -89,6 +89,8 @@ enum { ATA_ID_DLF = 128, ATA_ID_CSFO = 129, ATA_ID_CFA_POWER = 160, + ATA_ID_CFA_KEY_MGMT = 162, + ATA_ID_CFA_MODES = 163, ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), -- cgit v1.2.3 From 357fd373e194ec5bb02fe875a67c0874ab74b5a6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Mar 2009 00:24:01 +0800 Subject: Blackfin arch: remove duplicated ANOMALY_05000448 ifdef check Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/arch_checks.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index a2ca26aa210d..80d39b2f9db2 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -68,8 +68,6 @@ # error "The kernel load address is too high; keep it below 10meg for safety" #endif -#ifdef ANOMALY_05000448 -# if ANOMALY_05000448 -# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. -# endif +#if ANOMALY_05000448 +# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. #endif -- cgit v1.2.3 From 4aad7ec373a559177ee2c488455f6bf8928c030c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Mar 2009 00:27:17 +0800 Subject: Blackfin arch: disable legacy /proc/scsi/ support by default Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF548-EZKIT_defconfig | 2 +- arch/blackfin/configs/CM-BF548_defconfig | 2 +- arch/blackfin/configs/IP0X_defconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index b41dbd08c2c6..6bc2fb1b2a70 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -680,7 +680,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 542ebc5436ad..f410430b4e3d 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -595,7 +595,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index eae83b5de92f..7db93874c987 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_SCSI=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) -- cgit v1.2.3 From f3f704d375fcc92950f688ccb3dd0f650acace92 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 6 Mar 2009 00:27:57 +0800 Subject: Blackfin arch: SPI_MMC is now mainlined MMC_SPI Signed-off-by: Mike Frysinger Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/boards/ezbrd.c | 24 +++++++----------------- arch/blackfin/mach-bf527/boards/cm_bf527.c | 26 ++++++++------------------ arch/blackfin/mach-bf527/boards/ezbrd.c | 24 +++++++----------------- arch/blackfin/mach-bf533/boards/blackstamp.c | 24 +++++++----------------- arch/blackfin/mach-bf533/boards/cm_bf533.c | 24 +++++++----------------- arch/blackfin/mach-bf533/boards/ip0x.c | 13 ++++++------- arch/blackfin/mach-bf537/boards/cm_bf537.c | 26 ++++++++------------------ arch/blackfin/mach-bf537/boards/minotaur.c | 24 +++++++----------------- arch/blackfin/mach-bf537/boards/pnav10.c | 24 +++++++----------------- arch/blackfin/mach-bf537/boards/tcm_bf537.c | 24 +++++++----------------- arch/blackfin/mach-bf561/boards/cm_bf561.c | 15 +++++++-------- 11 files changed, 78 insertions(+), 170 deletions(-) diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index b044de49ecf0..41f2eacfef20 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -182,9 +182,9 @@ static struct bfin5xx_spi_chip spi_switch_info = { #endif #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -276,23 +276,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 856c097b5317..48e69eecdba4 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 83606fcdde27..7fe480e4ebe8 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 015c18f85e7f..0765872a8ada 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index e7061c7e8c42..e8974878d8c2 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index e30b1b7d1442..f19b63378b12 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* * CPOL (Clock Polarity) * 0 - Active high SCK @@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 2, .bus_num = 1, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 9cd8fb2a30d3..41c75b9bfac0 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 1, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index db7d3a385e4b..3c159819e555 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 590eb3a139b7..4e1de1e53f89 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 3f4f203a06ec..53ad10f3cd76 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 6880d1ebfe60..f623c6b0719f 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif -- cgit v1.2.3 From 33dd6f92a1a7ad85c54d47fd9d73371a32c0bde4 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 20 Feb 2009 06:53:48 -0700 Subject: [SCSI] sd: Don't try to spin up drives that are connected to an inactive port We currently try to spin up drives connected to standby and unavailable ports. This will never succeed and wastes a lot of time. Fail quickly if the sense data reports the port is in standby or unavailable state. Reported-by: Narayanan Rengarajan Tested-by: Narayanan Rengarajan Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 55310dbc10a6..4970ae4a62d6 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1167,23 +1167,19 @@ sd_spinup_disk(struct scsi_disk *sdkp) /* * The device does not want the automatic start to be issued. */ - if (sdkp->device->no_start_on_add) { + if (sdkp->device->no_start_on_add) break; - } - - /* - * If manual intervention is required, or this is an - * absent USB storage device, a spinup is meaningless. - */ - if (sense_valid && - sshdr.sense_key == NOT_READY && - sshdr.asc == 4 && sshdr.ascq == 3) { - break; /* manual intervention required */ - /* - * Issue command to spin up drive when not ready - */ - } else if (sense_valid && sshdr.sense_key == NOT_READY) { + if (sense_valid && sshdr.sense_key == NOT_READY) { + if (sshdr.asc == 4 && sshdr.ascq == 3) + break; /* manual intervention required */ + if (sshdr.asc == 4 && sshdr.ascq == 0xb) + break; /* standby */ + if (sshdr.asc == 4 && sshdr.ascq == 0xc) + break; /* unavailable */ + /* + * Issue command to spin up drive when not ready + */ if (!spintime) { sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); cmd[0] = START_STOP; -- cgit v1.2.3 From ef449e6d21b6e560c7ec36ed285ec3a34e0b12ed Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 5 Mar 2009 17:33:50 +0100 Subject: [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info Fix build warnings due to struct i2c_board_info in Patch "5311/1: add core support for built in i2c bus" is causing 11 of 39 the build warnings with Kautobuild for ep93xx_defconfig on kernel 2.6.29-rc5-git4. This patch fixes it. Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/include/mach/platform.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 88f7e88f152f..05f0f4f2f3ce 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,8 @@ #ifndef __ASSEMBLY__ +struct i2c_board_info; + struct ep93xx_eth_data { unsigned char dev_addr[6]; -- cgit v1.2.3 From c9a0c8a6845b5efb64841f40b8efb4c387051d46 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 25 Feb 2009 13:33:01 +0100 Subject: [WATCHDOG] orion5x_wdt.c: 'ORION5X_TCLK' undeclared orion5x_wdt no longer compiled after the changes in commit ebe35aff883496c07248df82c8576c3b6e84bbbe ("Orion: prepare for runtime-determined timer tick rate"). The tick rate define (ORION5X_TCLK) was removed in favor of a runtime detection. The quick fix is to add the define in the watchdog driver. The fix is not correct for all supported orion5x platforms, but since the supported platforms right now are 133 Mhz and 166 Mhz, it won't be _that_ far off. ;-) A fix that uses the runtime-determined timer tick rate will be applied later. Signed-off-by: Wim Van Sebroeck Cc: Kristof Provost Acked-by: Lennert Buytenhek Cc: Nicolas Pitre Cc: Russell King Cc: Andrew Morton --- drivers/watchdog/orion5x_wdt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c index 14a339f58b6a..b64ae1a17832 100644 --- a/drivers/watchdog/orion5x_wdt.c +++ b/drivers/watchdog/orion5x_wdt.c @@ -29,6 +29,7 @@ #define WDT_EN 0x0010 #define WDT_VAL (TIMER_VIRT_BASE + 0x0024) +#define ORION5X_TCLK 166666667 #define WDT_MAX_DURATION (0xffffffff / ORION5X_TCLK) #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 -- cgit v1.2.3 From 6a25b27d602aac24f3c642722377ba5d778417ec Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 5 Mar 2009 13:40:35 -0500 Subject: SELinux: open perm for sock files When I did open permissions I didn't think any sockets would have an open. Turns out AF_UNIX sockets can have an open when they are bound to the filesystem namespace. This patch adds a new SOCK_FILE__OPEN permission. It's safe to add this as the open perms are already predicated on capabilities and capabilities means we have unknown perm handling so systems should be as backwards compatible as the policy wants them to be. https://bugzilla.redhat.com/show_bug.cgi?id=475224 Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 2 ++ security/selinux/include/av_perm_to_string.h | 1 + security/selinux/include/av_permissions.h | 1 + 3 files changed, 4 insertions(+) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 309648c573d8..cd3307a26d11 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1838,6 +1838,8 @@ static inline u32 open_file_to_av(struct file *file) av |= FIFO_FILE__OPEN; else if (S_ISDIR(mode)) av |= DIR__OPEN; + else if (S_ISSOCK(mode)) + av |= SOCK_FILE__OPEN; else printk(KERN_ERR "SELinux: WARNING: inside %s with " "unknown mode:%o\n", __func__, mode); diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h index c0c885427b91..c7531ee9c7bd 100644 --- a/security/selinux/include/av_perm_to_string.h +++ b/security/selinux/include/av_perm_to_string.h @@ -24,6 +24,7 @@ S_(SECCLASS_CHR_FILE, CHR_FILE__EXECMOD, "execmod") S_(SECCLASS_CHR_FILE, CHR_FILE__OPEN, "open") S_(SECCLASS_BLK_FILE, BLK_FILE__OPEN, "open") + S_(SECCLASS_SOCK_FILE, SOCK_FILE__OPEN, "open") S_(SECCLASS_FIFO_FILE, FIFO_FILE__OPEN, "open") S_(SECCLASS_FD, FD__USE, "use") S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__CONNECTTO, "connectto") diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h index 0ba79fe00e11..0b8f9b2bbde8 100644 --- a/security/selinux/include/av_permissions.h +++ b/security/selinux/include/av_permissions.h @@ -174,6 +174,7 @@ #define SOCK_FILE__SWAPON 0x00004000UL #define SOCK_FILE__QUOTAON 0x00008000UL #define SOCK_FILE__MOUNTON 0x00010000UL +#define SOCK_FILE__OPEN 0x00020000UL #define FIFO_FILE__IOCTL 0x00000001UL #define FIFO_FILE__READ 0x00000002UL #define FIFO_FILE__WRITE 0x00000004UL -- cgit v1.2.3 From dd34b5d75a0405814a3de83f02a44ac297e81629 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 5 Mar 2009 13:43:35 -0500 Subject: SELinux: new permission between tty audit and audit socket New selinux permission to separate the ability to turn on tty auditing from the ability to set audit rules. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/include/av_perm_to_string.h | 1 + security/selinux/include/av_permissions.h | 1 + security/selinux/nlmsgtab.c | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h index c7531ee9c7bd..31df1d7c1aee 100644 --- a/security/selinux/include/av_perm_to_string.h +++ b/security/selinux/include/av_perm_to_string.h @@ -153,6 +153,7 @@ S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_WRITE, "nlmsg_write") S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_RELAY, "nlmsg_relay") S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_READPRIV, "nlmsg_readpriv") + S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT, "nlmsg_tty_audit") S_(SECCLASS_NETLINK_IP6FW_SOCKET, NETLINK_IP6FW_SOCKET__NLMSG_READ, "nlmsg_read") S_(SECCLASS_NETLINK_IP6FW_SOCKET, NETLINK_IP6FW_SOCKET__NLMSG_WRITE, "nlmsg_write") S_(SECCLASS_ASSOCIATION, ASSOCIATION__SENDTO, "sendto") diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h index 0b8f9b2bbde8..d645192ee950 100644 --- a/security/selinux/include/av_permissions.h +++ b/security/selinux/include/av_permissions.h @@ -708,6 +708,7 @@ #define NETLINK_AUDIT_SOCKET__NLMSG_WRITE 0x00800000UL #define NETLINK_AUDIT_SOCKET__NLMSG_RELAY 0x01000000UL #define NETLINK_AUDIT_SOCKET__NLMSG_READPRIV 0x02000000UL +#define NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT 0x04000000UL #define NETLINK_IP6FW_SOCKET__IOCTL 0x00000001UL #define NETLINK_IP6FW_SOCKET__READ 0x00000002UL #define NETLINK_IP6FW_SOCKET__WRITE 0x00000004UL diff --git a/security/selinux/nlmsgtab.c b/security/selinux/nlmsgtab.c index 4ed7bab89c59..c6875fd3b9d6 100644 --- a/security/selinux/nlmsgtab.c +++ b/security/selinux/nlmsgtab.c @@ -113,7 +113,7 @@ static struct nlmsg_perm nlmsg_audit_perms[] = { AUDIT_USER, NETLINK_AUDIT_SOCKET__NLMSG_RELAY }, { AUDIT_SIGNAL_INFO, NETLINK_AUDIT_SOCKET__NLMSG_READ }, { AUDIT_TTY_GET, NETLINK_AUDIT_SOCKET__NLMSG_READ }, - { AUDIT_TTY_SET, NETLINK_AUDIT_SOCKET__NLMSG_WRITE }, + { AUDIT_TTY_SET, NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT }, }; -- cgit v1.2.3 From d2c452306ab402d7a3572bc3bf8e575796529bf8 Mon Sep 17 00:00:00 2001 From: Gregory Lardiere Date: Sun, 22 Feb 2009 17:54:11 -0300 Subject: V4L/DVB (10789): m5602-s5k4aa: Split up the initial sensor probe in chunks. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous probe rotine tried to read 6 bytes in one chunk which currently isn't allowed. This is the rev. 10346 243399e67c41 readded with a high priority. Signed-off-by: Gregory Lardiere Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index e564a61a72d7..48892b5715d5 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -102,7 +102,11 @@ int s5k4aa_probe(struct sd *sd) } /* Test some registers, but we don't know their exact meaning yet */ - if (m5602_read_sensor(sd, 0x00, prod_id, sizeof(prod_id))) + if (m5602_read_sensor(sd, 0x00, prod_id, 2)) + return -ENODEV; + if (m5602_read_sensor(sd, 0x02, prod_id+2, 2)) + return -ENODEV; + if (m5602_read_sensor(sd, 0x04, prod_id+4, 2)) return -ENODEV; if (memcmp(prod_id, expected_prod_id, sizeof(prod_id))) -- cgit v1.2.3 From 4c6c390eb8ba0c569279266a98c604508c695ef8 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Thu, 5 Mar 2009 13:03:32 -0300 Subject: V4L/DVB (10832): tvaudio: Avoid breakage with tda9874a The 'bytes' array is 64 bytes large but the easy standard programming (TDA9874A_ESP) has a number of 255, outside the shadow array size. This patch increases the size of the shadow array in order to accomodate this register. Signed-off-by: Vitaly Wool Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 5aeccb301cea..076ed5bf48b1 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); /* ---------------------------------------------------------------------- */ /* our structs */ -#define MAXREGS 64 +#define MAXREGS 256 struct CHIPSTATE; typedef int (*getvalue)(int); -- cgit v1.2.3 From e08e7b5f01de7ec246b996c65e9c26c7cea0c62d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 5 Mar 2009 16:19:14 -0300 Subject: V4L/DVB (10834): zoran: auto-select bt866 for AverMedia 6 Eyes AFAIK, the bt866 is only seen on AverMedia 6 Eyes. However, no module selects it. Adds a proper select for this driver. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig index 4ea5fa71de89..8666e19f31a7 100644 --- a/drivers/media/video/zoran/Kconfig +++ b/drivers/media/video/zoran/Kconfig @@ -68,6 +68,7 @@ config VIDEO_ZORAN_AVS6EYES tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO help Support for the AverMedia 6 Eyes video surveillance card. -- cgit v1.2.3 From a6bc77241d79d39ad2ad8010a82ce7e0f437ae05 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Mar 2009 05:06:27 +0000 Subject: sh: multiple vectors per irq - sh7763 Update intc tables and platform data to use one linux irq per maskable interrupt source instead of keeping the one-to-one mapping between vectors and linux irqs. This fixes potential irq masking issues for sh7763 hardware blocks such as RTC/SCIF/DMAC/GETHER/PCIC5/MMCIF/SIM/GPIO/USBF. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 113 +++++++++++---------------------- 1 file changed, 37 insertions(+), 76 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 3c5b629887a8..14a916f0d75e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -3,7 +3,7 @@ * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2007 Yoshihiro Shimoda - * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -22,18 +22,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ - .start = 20, + /* Shared Period/Carry/Alarm IRQ */ .flags = IORESOURCE_IRQ, }, }; @@ -50,17 +39,17 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .mapbase = 0xffe08000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 76, 77, 79, 78 }, + .irqs = { 76, 76, 76, 76 }, }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 104, 105, 107, 106 }, + .irqs = { 104, 104, 104, 104 }, }, { .flags = 0, } @@ -148,93 +137,65 @@ enum { IRL_HHLL, IRL_HHLH, IRL_HHHL, IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, TMU0, TMU1, TMU2, TMU2_TICPI, - HUDI, LCDC, - DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - DMAC0_DMINT4, DMAC0_DMINT5, - IIC0, IIC1, - CMT, - GEINT0, GEINT1, GEINT2, - HAC, - PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, - PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, - STIF0, STIF1, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - SIOF0, SIOF1, SIOF2, - USBH, USBFI0, USBFI1, - TPU, PCC, - MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, - SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5, + STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2, + USBH, USBF, TPU, PCC, MMCIF, SIM, TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3, - SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, - GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3, + SCIF2, GPIO, /* interrupt groups */ - TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5, - SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO, + TMU012, TMU345, }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), INTC_VECT(LCDC, 0x620), - INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), - INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0), - INTC_VECT(DMAC0_DMAE, 0x6c0), - INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), - INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), - INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x6c0), + INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720), + INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760), + INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0), INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0), - INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920), - INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960), + INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920), + INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960), INTC_VECT(HAC, 0x980), INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), - INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), - INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), - INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0), + INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0), + INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20), INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60), - INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0), - INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0), + INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0), + INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0), INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20), - INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80), - INTC_VECT(USBFI1, 0xca0), + INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80), + INTC_VECT(USBF, 0xca0), INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0), - INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), - INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), - INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0), - INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0), + INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20), + INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60), + INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0), + INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0), INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), - INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20), - INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60), - INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), - INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), + INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20), + INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60), + INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0), + INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0), }; static struct intc_group groups[] __initdata = { INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), INTC_GROUP(TMU345, TMU3, TMU4, TMU5), - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, - DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2), - INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(USBF, USBFI0, USBFI1), - INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), - INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), - INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3), }; static struct intc_mask_reg mask_registers[] __initdata = { -- cgit v1.2.3 From 075901af281b2afb47b1423ac488e713844db396 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Mar 2009 14:37:34 +0900 Subject: sh: Restore RTC IRQ setting for SH7763 setup. This was accidentally dropped in the multiple vectors per irq conversion. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 14a916f0d75e..bdf0f61ae1ed 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -23,6 +23,7 @@ static struct resource rtc_resources[] = { }, [1] = { /* Shared Period/Carry/Alarm IRQ */ + .start = 20, .flags = IORESOURCE_IRQ, }, }; -- cgit v1.2.3 From 59247eaea50cc68cc6ce3d3fd3855f3301b65c96 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 6 Mar 2009 08:55:24 +0100 Subject: block: fix missing bio back/front segment size setting in blk_recount_segments() Commit 1e42807918d17e8c93bf14fbb74be84b141334c1 introduced a bug where we don't get front/back segment sizes in the bio in blk_recount_segments(). Fix this by tracking the back bio as well as the front bio in __blk_recalc_rq_segments(), this also cleans up the interface by getting rid of the segment size pointer passing. Tested-by: Thomas Gleixner Tested-by: Ingo Molnar Signed-off-by: Jens Axboe --- block/blk-merge.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/block/blk-merge.c b/block/blk-merge.c index a104593e70c3..5a244f05360f 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -39,14 +39,13 @@ void blk_recalc_rq_sectors(struct request *rq, int nsect) } static unsigned int __blk_recalc_rq_segments(struct request_queue *q, - struct bio *bio, - unsigned int *seg_size_ptr) + struct bio *bio) { unsigned int phys_size; struct bio_vec *bv, *bvprv = NULL; int cluster, i, high, highprv = 1; unsigned int seg_size, nr_phys_segs; - struct bio *fbio; + struct bio *fbio, *bbio; if (!bio) return 0; @@ -87,26 +86,20 @@ new_segment: seg_size = bv->bv_len; highprv = high; } + bbio = bio; } - if (seg_size_ptr) - *seg_size_ptr = seg_size; + if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size) + fbio->bi_seg_front_size = seg_size; + if (seg_size > bbio->bi_seg_back_size) + bbio->bi_seg_back_size = seg_size; return nr_phys_segs; } void blk_recalc_rq_segments(struct request *rq) { - unsigned int seg_size = 0, phys_segs; - - phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size); - - if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size) - rq->bio->bi_seg_front_size = seg_size; - if (seg_size > rq->biotail->bi_seg_back_size) - rq->biotail->bi_seg_back_size = seg_size; - - rq->nr_phys_segments = phys_segs; + rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio); } void blk_recount_segments(struct request_queue *q, struct bio *bio) @@ -114,7 +107,7 @@ void blk_recount_segments(struct request_queue *q, struct bio *bio) struct bio *nxt = bio->bi_next; bio->bi_next = NULL; - bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL); + bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio); bio->bi_next = nxt; bio->bi_flags |= (1 << BIO_SEG_VALID); } -- cgit v1.2.3 From 14b97595e0e1f47b6f809e180e5bcd8dcd995690 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 09:42:07 +0100 Subject: ALSA: hda - Fix typos in slave controls in patch_sigmatel.c "Headphone Playback ..." appears twice in slave_vols[] and slave_sws[]. They should be "Headphone Playback2 ..." Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3bc427645da8..995b413078f5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1207,7 +1207,7 @@ static const char *slave_vols[] = { "LFE Playback Volume", "Side Playback Volume", "Headphone Playback Volume", - "Headphone Playback Volume", + "Headphone2 Playback Volume", "Speaker Playback Volume", "External Speaker Playback Volume", "Speaker2 Playback Volume", @@ -1221,7 +1221,7 @@ static const char *slave_sws[] = { "LFE Playback Switch", "Side Playback Switch", "Headphone Playback Switch", - "Headphone Playback Switch", + "Headphone2 Playback Switch", "Speaker Playback Switch", "External Speaker Playback Switch", "Speaker2 Playback Switch", -- cgit v1.2.3 From c50ff7c04225c945b13d410d50fde6ff6c59d7ee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 09:43:58 +0100 Subject: ALSA: hda - Fix headphone-detect regression with multiple HP jacks The recent changes over the DAC detection mechanism in patch_sigmatel.c breaks the HP detection on the machines with multiple HP jacks. It's basically because of the workaround to support the multi-channel output. Since the HP detection is more important feature, disable the HP-swap workaroud temporarily. Reference: Novell bnc#482052 https://bugzilla.novell.com/show_bug.cgi?id=482052 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 995b413078f5..6094344fb223 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3516,6 +3516,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out if (! spec->autocfg.line_outs) return 0; /* can't find valid pin config */ +#if 0 /* FIXME: temporarily disabled */ /* If we have no real line-out pin and multiple hp-outs, HPs should * be set up as multi-channel outputs. */ @@ -3535,6 +3536,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out spec->autocfg.line_out_type = AUTO_PIN_HP_OUT; spec->autocfg.hp_outs = 0; } +#endif /* FIXME: temporarily disabled */ if (spec->autocfg.mono_out_pin) { int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) & (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP); -- cgit v1.2.3 From f033599aac86f4eb08a1b6b851568a2587e8c6ad Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 17:56:58 +0900 Subject: sh: intc: Make missing unique IRQ mask warning more verbose. This includes the IRQ number in addition to the vector, as not all platforms wrap in with INTC_VECT(). Signed-off-by: Paul Mundt --- drivers/sh/intc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index d7b8959d9d92..2269fbcaa182 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -569,8 +569,8 @@ static void __init intc_register_irq(struct intc_desc *desc, primary = 1; if (!data[0] && !data[1]) - pr_warning("intc: missing unique irq mask for 0x%04x\n", - irq2evt(irq)); + pr_warning("intc: missing unique irq mask for " + "irq %d (vect 0x%04x)\n", irq, irq2evt(irq)); data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1); data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1); -- cgit v1.2.3 From bb943a286c6f2993a737cc44c170d8b26e72c8ff Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 17:58:51 +0900 Subject: sh: multiple vectors per irq - sh7203. Follow the conversions as per the other subtypes. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 213 +++++++++++---------------------- 1 file changed, 73 insertions(+), 140 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index e98dc4450352..18d127ca0e62 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -1,7 +1,7 @@ /* * SH7203 and SH7263 Setup * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,50 +18,31 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, - DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, - DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, - DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, - DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, USB, LCDC, CMT0, CMT1, BSC, WDT, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, + + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V, + ADC_ADI, - IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI, - IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI, - IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI, - IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, - SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, - SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI, - SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI, + + IIC30, IIC31, IIC32, IIC33, + SCIF0, SCIF1, SCIF2, SCIF3, + + SSU0, SSU1, + SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */ ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - - SDHI3, SDHI0, SDHI1, - - RTC_ARM, RTC_PRD, RTC_CUP, - RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE, - RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE, + FLCTL, SDHI3, SDHI0, SDHI1, RTC, RCAN0, RCAN1, SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI, /* interrupt groups */ - PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, - MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, - MTU3_ABCD, MTU4_ABCD, - IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3, - SSU0, SSU1, ROMDEC, SDHI, FLCTL, RTC, RCAN0, RCAN1, SRC + PINT, ROMDEC, SDHI, SRC }; static struct intc_vect vectors[] __initdata = { @@ -73,68 +54,68 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), - INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), - INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), - INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), - INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), - INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), - INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), - INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), - INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109), + INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113), + INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117), + INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121), + INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125), + INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129), + INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133), + INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137), INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141), INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143), INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145), - INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147), - INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149), - INTC_IRQ(MTU2_TCI0V, 150), - INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152), - INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154), - INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156), - INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158), - INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160), - INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162), - INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164), + INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147), + INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149), + INTC_IRQ(MTU0_VEF, 150), + INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152), + INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154), + INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156), + INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158), + INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160), + INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162), + INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164), INTC_IRQ(MTU2_TCI3V, 165), - INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167), - INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169), + INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167), + INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169), INTC_IRQ(MTU2_TCI4V, 170), INTC_IRQ(ADC_ADI, 171), - INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173), - INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175), - INTC_IRQ(IIC30_TEI, 176), - INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178), - INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180), - INTC_IRQ(IIC31_TEI, 181), - INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183), - INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185), - INTC_IRQ(IIC32_TEI, 186), - INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188), - INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190), - INTC_IRQ(IIC33_TEI, 191), - INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193), - INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195), - INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197), - INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199), - INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201), - INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203), - INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205), - INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207), - INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209), - INTC_IRQ(SSU0_SSTXI, 210), - INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212), - INTC_IRQ(SSU1_SSTXI, 213), + INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173), + INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175), + INTC_IRQ(IIC30, 176), + INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178), + INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180), + INTC_IRQ(IIC31, 181), + INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183), + INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185), + INTC_IRQ(IIC32, 186), + INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188), + INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190), + INTC_IRQ(IIC33, 191), + INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193), + INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195), + INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197), + INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199), + INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201), + INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203), + INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205), + INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207), + INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209), + INTC_IRQ(SSU0, 210), + INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212), + INTC_IRQ(SSU1, 213), INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215), INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217), - INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225), - INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227), - INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232), - INTC_IRQ(RTC_CUP, 233), - INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235), - INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237), - INTC_IRQ(RCAN0_SLE, 238), - INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240), - INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242), - INTC_IRQ(RCAN1_SLE, 243), + INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225), + INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227), + INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232), + INTC_IRQ(RTC, 233), + INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235), + INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237), + INTC_IRQ(RCAN0, 238), + INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240), + INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242), + INTC_IRQ(RCAN1, 243), /* SH7263-specific trash */ #ifdef CONFIG_CPU_SUBTYPE_SH7263 @@ -154,44 +135,6 @@ static struct intc_vect vectors[] __initdata = { static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), - INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), - INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), - INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), - INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), - INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), - INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), - INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), - INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), - INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), - INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), - INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), - INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), - INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), - INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), - INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, - IIC30_TEI), - INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, - IIC31_TEI), - INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, - IIC32_TEI), - INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, - IIC33_TEI), - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), - INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), - INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI), - INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, - FLCTL_FLTREQ1I), - INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP), - INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, - RCAN0_SLE), - INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, - RCAN1_SLE), - #ifdef CONFIG_CPU_SUBTYPE_SH7263 INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY), @@ -242,22 +185,22 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 193, 194, 195, 192 }, + .irqs = { 192, 192, 192, 192 }, }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 197, 198, 199, 196 }, + .irqs = { 196, 196, 196, 196 }, }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 201, 202, 203, 200 }, + .irqs = { 200, 200, 200, 200 }, }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 205, 206, 207, 204 }, + .irqs = { 204, 204, 204, 204 }, }, { .flags = 0, } @@ -278,17 +221,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 232, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 233, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 231, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From e45efe68d11e9f3c836b019a32b879a26a2b9b33 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 18:02:33 +0900 Subject: sh: multiple vectors per irq - sh7263. Convert over the SH7263 IRQ groups as well. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 18d127ca0e62..820dfb2e8656 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -34,15 +34,11 @@ enum { SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */ - ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF, - ROMDEC_IREADY, - - FLCTL, SDHI3, SDHI0, SDHI1, RTC, RCAN0, RCAN1, - - SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI, + ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1, + SRC, IEBI, /* interrupt groups */ - PINT, ROMDEC, SDHI, SRC + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -119,14 +115,15 @@ static struct intc_vect vectors[] __initdata = { /* SH7263-specific trash */ #ifdef CONFIG_CPU_SUBTYPE_SH7263 - INTC_IRQ(ROMDEC_ISY, 218), INTC_IRQ(ROMDEC_IERR, 219), - INTC_IRQ(ROMDEC_IARG, 220), INTC_IRQ(ROMDEC_ISEC, 221), - INTC_IRQ(ROMDEC_IBUF, 222), INTC_IRQ(ROMDEC_IREADY, 223), + INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219), + INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221), + INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223), - INTC_IRQ(SDHI3, 228), INTC_IRQ(SDHI0, 229), INTC_IRQ(SDHI1, 230), + INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229), + INTC_IRQ(SDHI, 230), - INTC_IRQ(SRC_OVF, 244), INTC_IRQ(SRC_ODFI, 245), - INTC_IRQ(SRC_IDEI, 246), + INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245), + INTC_IRQ(SRC, 246), INTC_IRQ(IEBI, 247), #endif @@ -135,12 +132,6 @@ static struct intc_vect vectors[] __initdata = { static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), -#ifdef CONFIG_CPU_SUBTYPE_SH7263 - INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, - ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY), - INTC_GROUP(SDHI, SDHI3, SDHI0, SDHI1), - INTC_GROUP(SRC, SRC_OVF, SRC_ODFI, SRC_IDEI), -#endif }; static struct intc_prio_reg prio_registers[] __initdata = { -- cgit v1.2.3 From dc04d1b4d2043e2fca2d94d6d5542b930f2bc5b3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 10:00:05 +0100 Subject: ALSA: hda - Create output controls according to pin types for IDT/STAC Improve the parser to pick up more intuitive control names for the outputs judging from the pin type, instead of fixed names assigned to channels. Also, revive the multi-HP workaround since this change fixes the problem with the multi-HP detection. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 141 +++++++++++++++++++++-------------------- 1 file changed, 72 insertions(+), 69 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2e0a599f8c12..edd2ed7ebb49 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3039,35 +3039,33 @@ static int add_spec_extra_dacs(struct sigmatel_spec *spec, hda_nid_t nid) return 1; } -static int is_unique_dac(struct sigmatel_spec *spec, hda_nid_t nid) -{ - int i; - - if (spec->autocfg.line_outs != 1) - return 0; - if (spec->multiout.hp_nid == nid) - return 0; - for (i = 0; i < ARRAY_SIZE(spec->multiout.extra_out_nid); i++) - if (spec->multiout.extra_out_nid[i] == nid) - return 0; - return 1; -} - -/* add playback controls from the parsed DAC table */ -static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, - const struct auto_pin_cfg *cfg) +/* Create output controls + * The mixer elements are named depending on the given type (AUTO_PIN_XXX_OUT) + */ +static int create_multi_out_ctls(struct hda_codec *codec, int num_outs, + const hda_nid_t *pins, + const hda_nid_t *dac_nids, + int type) { struct sigmatel_spec *spec = codec->spec; static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" }; - hda_nid_t nid = 0; + static const char *hp_pfxs[] = { + "Headphone", "Headphone2", "Headphone3", "Headphone4" + }; + static const char *speaker_pfxs[] = { + "Speaker", "External Speaker", "Speaker2", "Speaker3" + }; + hda_nid_t nid; int i, err; unsigned int wid_caps; - for (i = 0; i < cfg->line_outs && spec->multiout.dac_nids[i]; i++) { - nid = spec->multiout.dac_nids[i]; - if (i == 2) { + for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) { + nid = dac_nids[i]; + if (!nid) + continue; + if (type != AUTO_PIN_HP_OUT && i == 2) { /* Center/LFE */ err = create_controls(codec, "Center", nid, 1); if (err < 0) @@ -3088,23 +3086,43 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, } } else { - const char *name = chname[i]; - /* if it's a single DAC, assign a better name */ - if (!i && is_unique_dac(spec, nid)) { - switch (cfg->line_out_type) { - case AUTO_PIN_HP_OUT: - name = "Headphone"; - break; - case AUTO_PIN_SPEAKER_OUT: - name = "Speaker"; - break; - } + const char *name; + switch (type) { + case AUTO_PIN_HP_OUT: + name = hp_pfxs[i]; + break; + case AUTO_PIN_SPEAKER_OUT: + name = speaker_pfxs[i]; + break; + default: + name = chname[i]; + break; } err = create_controls(codec, name, nid, 3); if (err < 0) return err; + if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) { + wid_caps = get_wcaps(codec, pins[i]); + if (wid_caps & AC_WCAP_UNSOL_CAP) + spec->hp_detect = 1; + } } } + return 0; +} + +/* add playback controls from the parsed DAC table */ +static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, + const struct auto_pin_cfg *cfg) +{ + struct sigmatel_spec *spec = codec->spec; + int err; + + err = create_multi_out_ctls(codec, cfg->line_outs, cfg->line_out_pins, + spec->multiout.dac_nids, + cfg->line_out_type); + if (err < 0) + return err; if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) { err = stac92xx_add_control(spec, @@ -3139,40 +3157,18 @@ static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec, struct auto_pin_cfg *cfg) { struct sigmatel_spec *spec = codec->spec; - hda_nid_t nid; - int i, err, nums; + int err; + + err = create_multi_out_ctls(codec, cfg->hp_outs, cfg->hp_pins, + spec->hp_dacs, AUTO_PIN_HP_OUT); + if (err < 0) + return err; + + err = create_multi_out_ctls(codec, cfg->speaker_outs, cfg->speaker_pins, + spec->speaker_dacs, AUTO_PIN_SPEAKER_OUT); + if (err < 0) + return err; - nums = 0; - for (i = 0; i < cfg->hp_outs; i++) { - static const char *pfxs[] = { - "Headphone", "Headphone2", "Headphone3", - }; - unsigned int wid_caps = get_wcaps(codec, cfg->hp_pins[i]); - if (wid_caps & AC_WCAP_UNSOL_CAP) - spec->hp_detect = 1; - if (nums >= ARRAY_SIZE(pfxs)) - continue; - nid = spec->hp_dacs[i]; - if (!nid) - continue; - err = create_controls(codec, pfxs[nums++], nid, 3); - if (err < 0) - return err; - } - nums = 0; - for (i = 0; i < cfg->speaker_outs; i++) { - static const char *pfxs[] = { - "Speaker", "External Speaker", "Speaker2", - }; - if (nums >= ARRAY_SIZE(pfxs)) - continue; - nid = spec->speaker_dacs[i]; - if (!nid) - continue; - err = create_controls(codec, pfxs[nums++], nid, 3); - if (err < 0) - return err; - } return 0; } @@ -3505,6 +3501,7 @@ static void stac92xx_auto_init_hp_out(struct hda_codec *codec) static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out, hda_nid_t dig_in) { struct sigmatel_spec *spec = codec->spec; + int hp_swap = 0; int err; if ((err = snd_hda_parse_pin_def_config(codec, @@ -3514,7 +3511,6 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out if (! spec->autocfg.line_outs) return 0; /* can't find valid pin config */ -#if 0 /* FIXME: temporarily disabled */ /* If we have no real line-out pin and multiple hp-outs, HPs should * be set up as multi-channel outputs. */ @@ -3533,8 +3529,8 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out spec->autocfg.line_outs = spec->autocfg.hp_outs; spec->autocfg.line_out_type = AUTO_PIN_HP_OUT; spec->autocfg.hp_outs = 0; + hp_swap = 1; } -#endif /* FIXME: temporarily disabled */ if (spec->autocfg.mono_out_pin) { int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) & (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP); @@ -3627,12 +3623,19 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out #endif err = stac92xx_auto_create_hp_ctls(codec, &spec->autocfg); - if (err < 0) return err; - err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg); + /* All output parsing done, now restore the swapped hp pins */ + if (hp_swap) { + memcpy(spec->autocfg.hp_pins, spec->autocfg.line_out_pins, + sizeof(spec->autocfg.hp_pins)); + spec->autocfg.hp_outs = spec->autocfg.line_outs; + spec->autocfg.line_out_type = AUTO_PIN_HP_OUT; + spec->autocfg.line_outs = 0; + } + err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg); if (err < 0) return err; -- cgit v1.2.3 From 7a411ee01bf3114ba2a2ae013eaae4e3c41f8eb5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 10:08:14 +0100 Subject: ALSA: hda - Allow slave controls with non-zero indices Fix snd_hda_add_vmaster() to check the non-zero indices of slave controls. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 04cb1251e3e7..1885e7649101 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1552,15 +1552,20 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name, for (s = slaves; *s; s++) { struct snd_kcontrol *sctl; - - sctl = snd_hda_find_mixer_ctl(codec, *s); - if (!sctl) { - snd_printdd("Cannot find slave %s, skipped\n", *s); - continue; + int i = 0; + for (;;) { + sctl = _snd_hda_find_mixer_ctl(codec, *s, i); + if (!sctl) { + if (!i) + snd_printdd("Cannot find slave %s, " + "skipped\n", *s); + break; + } + err = snd_ctl_add_slave(kctl, sctl); + if (err < 0) + return err; + i++; } - err = snd_ctl_add_slave(kctl, sctl); - if (err < 0) - return err; } return 0; } -- cgit v1.2.3 From 668b9652be33510a2a42b290dd335d34d38e2068 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 10:13:24 +0100 Subject: ALSA: hda - Create multiple HP / speaker controls with index Create multiple "Headphone" and "Speaker" controls with non-zero index numbers instead of "Headphone2", etc. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 33 ++++++++++++++------------------- 1 file changed, 14 insertions(+), 19 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index edd2ed7ebb49..d19090fd2d13 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1227,10 +1227,7 @@ static const char *slave_vols[] = { "LFE Playback Volume", "Side Playback Volume", "Headphone Playback Volume", - "Headphone2 Playback Volume", "Speaker Playback Volume", - "External Speaker Playback Volume", - "Speaker2 Playback Volume", NULL }; @@ -1241,10 +1238,7 @@ static const char *slave_sws[] = { "LFE Playback Switch", "Side Playback Switch", "Headphone Playback Switch", - "Headphone2 Playback Switch", "Speaker Playback Switch", - "External Speaker Playback Switch", - "Speaker2 Playback Switch", "IEC958 Playback Switch", NULL }; @@ -2976,8 +2970,8 @@ static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec) } /* create volume control/switch for the given prefx type */ -static int create_controls(struct hda_codec *codec, const char *pfx, - hda_nid_t nid, int chs) +static int create_controls_idx(struct hda_codec *codec, const char *pfx, + int idx, hda_nid_t nid, int chs) { struct sigmatel_spec *spec = codec->spec; char name[32]; @@ -3001,19 +2995,22 @@ static int create_controls(struct hda_codec *codec, const char *pfx, } sprintf(name, "%s Playback Volume", pfx); - err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, name, + err = stac92xx_add_control_idx(spec, STAC_CTL_WIDGET_VOL, idx, name, HDA_COMPOSE_AMP_VAL_OFS(nid, chs, 0, HDA_OUTPUT, spec->volume_offset)); if (err < 0) return err; sprintf(name, "%s Playback Switch", pfx); - err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE, name, + err = stac92xx_add_control_idx(spec, STAC_CTL_WIDGET_MUTE, idx, name, HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT)); if (err < 0) return err; return 0; } +#define create_controls(codec, pfx, nid, chs) \ + create_controls_idx(codec, pfx, 0, nid, chs) + static int add_spec_dacs(struct sigmatel_spec *spec, hda_nid_t nid) { if (spec->multiout.num_dacs > 4) { @@ -3051,12 +3048,6 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs, static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" }; - static const char *hp_pfxs[] = { - "Headphone", "Headphone2", "Headphone3", "Headphone4" - }; - static const char *speaker_pfxs[] = { - "Speaker", "External Speaker", "Speaker2", "Speaker3" - }; hda_nid_t nid; int i, err; unsigned int wid_caps; @@ -3087,18 +3078,22 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs, } else { const char *name; + int idx; switch (type) { case AUTO_PIN_HP_OUT: - name = hp_pfxs[i]; + name = "Headphone"; + idx = i; break; case AUTO_PIN_SPEAKER_OUT: - name = speaker_pfxs[i]; + name = "Speaker"; + idx = i; break; default: name = chname[i]; + idx = 0; break; } - err = create_controls(codec, name, nid, 3); + err = create_controls_idx(codec, name, idx, nid, 3); if (err < 0) return err; if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) { -- cgit v1.2.3 From d55eedd57d05dbb00e4b66d1c01ea6fac0274c38 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 18:21:38 +0900 Subject: sh: multiple vectors per irq - sh7201. Follow the conversions as per the other subtypes. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 224 ++++++++++++--------------------- 1 file changed, 80 insertions(+), 144 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index 0631e421c022..00f42f9e3f5c 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -2,6 +2,7 @@ * SH7201 setup * * Copyright (C) 2008 Peter Griffin pgriffin@mpc-data.co.uk + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,57 +19,32 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + ADC_ADI, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, - RTC_ARM, RTC_PRD, RTC_CUP, - WDT, - IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI, - IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI, - IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI, + + MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU, + MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V, + + RTC, WDT, + + IIC30, IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1, DMAC2_DMINT2, DMAC3_DMINT3, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, - SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, - SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI, - SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI, - SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI, - SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI, + SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, - RCAN0_ERS, RCAN0_OVR, - RCAN0_SLE, - RCAN0_RM0, RCAN0_RM1, - - RCAN1_ERS, RCAN1_OVR, - RCAN1_SLE, - RCAN1_RM0, RCAN1_RM1, + RCAN0, RCAN1, SSI0_SSII, SSI1_SSII, - TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0, - TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1, + TMR0, TMR1, /* interrupt groups */ - - IRQ, PINT, ADC, - MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU, - MTU23_ABCD, MTU24_ABCD, MTU25_UVW, - RTC, IIC30, IIC31, IIC32, - SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7, - RCAN0, RCAN1, TMR0, TMR1 - + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -76,6 +52,7 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), @@ -83,123 +60,92 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(ADC_ADI, 92), - INTC_IRQ(MTU2_TGI0A, 108), INTC_IRQ(MTU2_TGI0B, 109), - INTC_IRQ(MTU2_TGI0C, 110), INTC_IRQ(MTU2_TGI0D, 111), - INTC_IRQ(MTU2_TCI0V, 112), - INTC_IRQ(MTU2_TGI0E, 113), INTC_IRQ(MTU2_TGI0F, 114), + INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109), + INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111), + + INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113), + INTC_IRQ(MTU20_VEF, 114), + + INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117), + INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121), - INTC_IRQ(MTU2_TGI1A, 116), INTC_IRQ(MTU2_TGI1B, 117), - INTC_IRQ(MTU2_TCI1V, 120), INTC_IRQ(MTU2_TCI1U, 121), + INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125), + INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129), - INTC_IRQ(MTU2_TGI2A, 124), INTC_IRQ(MTU2_TGI2B, 125), - INTC_IRQ(MTU2_TCI2V, 128), INTC_IRQ(MTU2_TCI2U, 129), + INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133), + INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135), - INTC_IRQ(MTU2_TGI3A, 132), INTC_IRQ(MTU2_TGI3B, 133), - INTC_IRQ(MTU2_TGI3C, 134), INTC_IRQ(MTU2_TGI3D, 135), INTC_IRQ(MTU2_TCI3V, 136), - INTC_IRQ(MTU2_TGI4A, 140), INTC_IRQ(MTU2_TGI4B, 141), - INTC_IRQ(MTU2_TGI4C, 142), INTC_IRQ(MTU2_TGI4D, 143), + INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141), + INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143), + INTC_IRQ(MTU2_TCI4V, 144), - INTC_IRQ(MTU2_TGI5U, 148), INTC_IRQ(MTU2_TGI5V, 149), - INTC_IRQ(MTU2_TGI5W, 150), + INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149), + INTC_IRQ(MTU25_UVW, 150), + + INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153), + INTC_IRQ(RTC, 154), - INTC_IRQ(RTC_ARM, 152), INTC_IRQ(RTC_PRD, 153), - INTC_IRQ(RTC_CUP, 154), INTC_IRQ(WDT, 156), + INTC_IRQ(WDT, 156), - INTC_IRQ(IIC30_STPI, 157), INTC_IRQ(IIC30_NAKI, 158), - INTC_IRQ(IIC30_RXI, 159), INTC_IRQ(IIC30_TXI, 160), - INTC_IRQ(IIC30_TEI, 161), + INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158), + INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160), + INTC_IRQ(IIC30, 161), - INTC_IRQ(IIC31_STPI, 164), INTC_IRQ(IIC31_NAKI, 165), - INTC_IRQ(IIC31_RXI, 166), INTC_IRQ(IIC31_TXI, 167), - INTC_IRQ(IIC31_TEI, 168), + INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165), + INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167), + INTC_IRQ(IIC31, 168), - INTC_IRQ(IIC32_STPI, 170), INTC_IRQ(IIC32_NAKI, 171), - INTC_IRQ(IIC32_RXI, 172), INTC_IRQ(IIC32_TXI, 173), - INTC_IRQ(IIC32_TEI, 174), + INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171), + INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173), + INTC_IRQ(IIC32, 174), INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177), INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179), - INTC_IRQ(SCIF0_BRI, 180), INTC_IRQ(SCIF0_ERI, 181), - INTC_IRQ(SCIF0_RXI, 182), INTC_IRQ(SCIF0_TXI, 183), - INTC_IRQ(SCIF1_BRI, 184), INTC_IRQ(SCIF1_ERI, 185), - INTC_IRQ(SCIF1_RXI, 186), INTC_IRQ(SCIF1_TXI, 187), - INTC_IRQ(SCIF2_BRI, 188), INTC_IRQ(SCIF2_ERI, 189), - INTC_IRQ(SCIF2_RXI, 190), INTC_IRQ(SCIF2_TXI, 191), - INTC_IRQ(SCIF3_BRI, 192), INTC_IRQ(SCIF3_ERI, 193), - INTC_IRQ(SCIF3_RXI, 194), INTC_IRQ(SCIF3_TXI, 195), - INTC_IRQ(SCIF4_BRI, 196), INTC_IRQ(SCIF4_ERI, 197), - INTC_IRQ(SCIF4_RXI, 198), INTC_IRQ(SCIF4_TXI, 199), - INTC_IRQ(SCIF5_BRI, 200), INTC_IRQ(SCIF5_ERI, 201), - INTC_IRQ(SCIF5_RXI, 202), INTC_IRQ(SCIF5_TXI, 203), - INTC_IRQ(SCIF6_BRI, 204), INTC_IRQ(SCIF6_ERI, 205), - INTC_IRQ(SCIF6_RXI, 206), INTC_IRQ(SCIF6_TXI, 207), - INTC_IRQ(SCIF7_BRI, 208), INTC_IRQ(SCIF7_ERI, 209), - INTC_IRQ(SCIF7_RXI, 210), INTC_IRQ(SCIF7_TXI, 211), + INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181), + INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183), + INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185), + INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187), + INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189), + INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191), + INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193), + INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195), + INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197), + INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199), + INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201), + INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203), + INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205), + INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207), + INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209), + INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211), INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216), INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218), INTC_IRQ(DMAC7_DMINT7, 219), - INTC_IRQ(RCAN0_ERS, 228), INTC_IRQ(RCAN0_OVR, 229), - INTC_IRQ(RCAN0_SLE, 230), - INTC_IRQ(RCAN0_RM0, 231), INTC_IRQ(RCAN0_RM1, 232), + INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229), + INTC_IRQ(RCAN0, 230), + INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232), - INTC_IRQ(RCAN1_ERS, 234), INTC_IRQ(RCAN1_OVR, 235), - INTC_IRQ(RCAN1_SLE, 236), - INTC_IRQ(RCAN1_RM0, 237), INTC_IRQ(RCAN1_RM1, 238), + INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235), + INTC_IRQ(RCAN1, 236), + INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238), INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245), - INTC_IRQ(TMR0_CMIA0, 246), INTC_IRQ(TMR0_CMIB0, 247), - INTC_IRQ(TMR0_OVI0, 248), - - INTC_IRQ(TMR1_CMIA1, 252), INTC_IRQ(TMR1_CMIB1, 253), - INTC_IRQ(TMR1_OVI1, 254), + INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247), + INTC_IRQ(TMR0, 248), + INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253), + INTC_IRQ(TMR1, 254), }; static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(MTU20_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), - INTC_GROUP(MTU20_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), - - INTC_GROUP(MTU21_AB, MTU2_TGI1A, MTU2_TGI1B), - INTC_GROUP(MTU21_VU, MTU2_TCI1V, MTU2_TCI1U), - INTC_GROUP(MTU22_AB, MTU2_TGI2A, MTU2_TGI2B), - INTC_GROUP(MTU22_VU, MTU2_TCI2V, MTU2_TCI2U), - INTC_GROUP(MTU23_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), - INTC_GROUP(MTU24_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(MTU25_UVW, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), - INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP ), - - INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, - IIC30_TEI), - INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, - IIC31_TEI), - INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, - IIC32_TEI), - - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), - INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), - INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI), - INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI), - INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI), - INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI), - - INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, - RCAN0_SLE), - INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, - RCAN1_SLE), - - INTC_GROUP(TMR0, TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0), - INTC_GROUP(TMR1, TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -212,7 +158,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } }, { 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } }, - { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0 , SCIF1 } }, + { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } }, { 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } }, { 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4 } }, { 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } }, @@ -234,42 +180,42 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 181, 182, 183, 180} + .irqs = { 180, 180, 180, 180 } }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 185, 186, 187, 184} + .irqs = { 184, 184, 184, 184 } }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 189, 186, 187, 188} + .irqs = { 188, 188, 188, 188 } }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 193, 194, 195, 192} + .irqs = { 192, 192, 192, 192 } }, { .mapbase = 0xfffea000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 196, 198, 199, 196} + .irqs = { 196, 196, 196, 196 } }, { .mapbase = 0xfffea800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 201, 202, 203, 200} + .irqs = { 200, 200, 200, 200 } }, { .mapbase = 0xfffeb000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 205, 206, 207, 204} + .irqs = { 204, 204, 204, 204 } }, { .mapbase = 0xfffeb800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 209, 210, 211, 208} + .irqs = { 208, 208, 208, 208 } }, { .flags = 0, } @@ -290,17 +236,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 153, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 154, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 152, .flags = IORESOURCE_IRQ, }, -- cgit v1.2.3 From f858abbecd0a3ec0ab3e3678612d626a0bd49686 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 18:34:15 +0900 Subject: sh: multiple vectors per irq - sh7206. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 154 +++++++++++++-------------------- 1 file changed, 58 insertions(+), 96 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index e6d4ec445dd8..c46a8355726d 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -2,6 +2,7 @@ * SH7206 Setup * * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -19,34 +20,23 @@ enum { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, ADC_ADI0, ADC_ADI1, - DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, - DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, - DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, - DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + + DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, + + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S, + IIC3, + CMT0, CMT1, BSC, WDT, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, - POE2_OEI1, POE2_OEI2, - MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V, - MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V, - MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W, + + MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V, + POE2_OEI3, - IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, - SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, + + SCIF0, SCIF1, SCIF2, SCIF3, /* interrupt groups */ - PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, - MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, - MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S, - IIC3, SCIF0, SCIF1, SCIF2, SCIF3, + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -59,86 +49,58 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96), - INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), - INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), - INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), - INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), - INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), - INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), - INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), - INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109), + INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113), + INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117), + INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121), + INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125), + INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129), + INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133), + INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137), INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144), INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152), - INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157), - INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159), - INTC_IRQ(MTU2_TCI0V, 160), - INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162), - INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165), - INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169), - INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173), - INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177), - INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181), - INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183), + INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157), + INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159), + INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161), + INTC_IRQ(MTU0_VEF, 162), + INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165), + INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169), + INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173), + INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177), + INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181), + INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183), INTC_IRQ(MTU2_TCI3V, 184), - INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189), - INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191), + INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189), + INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191), INTC_IRQ(MTU2_TCI4V, 192), - INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197), - INTC_IRQ(MTU2_TGI5W, 198), - INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201), - INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205), - INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207), + INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197), + INTC_IRQ(MTU5, 198), + INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201), + INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205), + INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207), INTC_IRQ(MTU2S_TCI3V, 208), - INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213), - INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215), + INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213), + INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215), INTC_IRQ(MTU2S_TCI4V, 216), - INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221), - INTC_IRQ(MTU2S_TGI5W, 222), + INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221), + INTC_IRQ(MTU5S, 222), INTC_IRQ(POE2_OEI3, 224), - INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229), - INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231), - INTC_IRQ(IIC3_TEI, 232), - INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241), - INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243), - INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245), - INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247), - INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249), - INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251), - INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253), - INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255), + INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229), + INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231), + INTC_IRQ(IIC3, 232), + INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241), + INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243), + INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245), + INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247), + INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249), + INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251), + INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253), + INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255), }; static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), - INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), - INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), - INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), - INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), - INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), - INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), - INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), - INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), - INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), - INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), - INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), - INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), - INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), - INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), - INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), - INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2), - INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B, - MTU2S_TGI3C, MTU2S_TGI3D), - INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B, - MTU2S_TGI4C, MTU2S_TGI4D), - INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W), - INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI), - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), - INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -174,22 +136,22 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 241, 242, 243, 240 }, + .irqs = { 240, 240, 240, 240 }, }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 245, 246, 247, 244 }, + .irqs = { 244, 244, 244, 244 }, }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 249, 250, 251, 248 }, + .irqs = { 248, 248, 248, 248 }, }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 253, 254, 255, 252 }, + .irqs = { 252, 252, 252, 252 }, }, { .flags = 0, } -- cgit v1.2.3 From e26b926a561ba24bfeb8a15bfc848f97052a50f4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 18:51:33 +0900 Subject: rtc: rtc-sh: Bump version up to reflect single IRQ support changes. Signed-off-by: Paul Mundt --- drivers/rtc/rtc-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index b37f44b0406e..aeff25111979 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -28,7 +28,7 @@ #include #define DRV_NAME "sh-rtc" -#define DRV_VERSION "0.2.0" +#define DRV_VERSION "0.2.1" #define RTC_REG(r) ((r) * rtc_reg_size) -- cgit v1.2.3 From 5dece2bbda728fbf6a70e48be782c24c427072b0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 19:19:31 +0900 Subject: sh: multiple vectors per irq - sh7619. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 56e5878e5516..0e32d8e448ca 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -2,6 +2,7 @@ * SH7619 Setup * * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,15 +19,10 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, WDT, EDMAC, CMT0, CMT1, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SCIF0, SCIF1, SCIF2, HIF_HIFI, HIF_HIFBI, DMAC0, DMAC1, DMAC2, DMAC3, SIOF, - - /* interrupt groups */ - SCIF0, SCIF1, SCIF2, }; static struct intc_vect vectors[] __initdata = { @@ -36,24 +32,18 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83), INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85), INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87), - INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89), - INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91), - INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93), - INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95), - INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97), - INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99), + INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89), + INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91), + INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93), + INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95), + INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97), + INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99), INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101), INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105), INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107), INTC_IRQ(SIOF, 108), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, @@ -64,7 +54,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL, NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { @@ -72,17 +62,17 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xf8400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 88, 89, 91, 90}, + .irqs = { 88, 88, 88, 88 }, }, { .mapbase = 0xf8410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 92, 93, 95, 94}, + .irqs = { 92, 92, 92, 92 }, }, { .mapbase = 0xf8420000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 96, 97, 99, 98}, + .irqs = { 96, 96, 96, 96 }, }, { .flags = 0, } -- cgit v1.2.3 From 053bfc5360c106528bbb57464ad2cbf4a2af8133 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 19:19:54 +0900 Subject: sh: multiple vectors per irq - mxg. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-mxg.c | 65 +++++++++++++------------------------ 1 file changed, 23 insertions(+), 42 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index e611d79fac4c..844293723cfc 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -1,7 +1,7 @@ /* * Renesas MX-G (R8A03022BG) Setup * - * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008, 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -20,23 +20,15 @@ enum { IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, - SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + SCIF0, SCIF1, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, + MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5 + MTU2_TGI3B, MTU2_TGI3C, /* interrupt groups */ - PINT, SCIF0, SCIF1, - MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5 + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -59,47 +51,36 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99), INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101), - INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221), - INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223), - INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225), - INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227), + INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221), + INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223), + INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225), + INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227), - INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229), - INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231), - INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233), + INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229), + INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231), + INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233), - INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235), - INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237), - INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239), + INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235), + INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237), + INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239), - INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241), - INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243), + INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241), + INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243), INTC_IRQ(MTU2_TGI3B, 244), INTC_IRQ(MTU2_TGI3C, 245), - INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247), - INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249), - INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251), + INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247), + INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249), + INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251), - INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253), - INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255), + INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253), + INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255), }; static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E), - INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B, - MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A), - INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A), - INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A, - MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -137,7 +118,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xff804000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 223, 220, 221, 222 }, + .irqs = { 220, 220, 220, 220 }, }, { .flags = 0, } -- cgit v1.2.3 From 592acbda89f40a93f7d71564cdf1da83229d226e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 19:20:14 +0900 Subject: sh: multiple vectors per irq - sh770x. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 68 +++++++++++------------------------ 1 file changed, 21 insertions(+), 47 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 93c55e2ed952..a74f960b5e79 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -2,6 +2,7 @@ * SH3 Setup code for SH7706, SH7707, SH7708, SH7709 * * Copyright (C) 2007 Magnus Damm + * Copyright (C) 2009 Paul Mundt * * Based on setup-sh7709.c * @@ -24,46 +25,37 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, PINT07, PINT815, - DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, - SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI, - ADC_ADI, + DMAC, SCIF0, SCIF2, SCI, ADC_ADI, LCDC, PCC0, PCC1, - TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - REF_RCMI, REF_ROVI, - - /* interrupt groups */ - RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0, + TMU0, TMU1, TMU2, + RTC, WDT, REF, }; static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), - INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500), - INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), + INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500), + INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540), INTC_VECT(WDT, 0x560), - INTC_VECT(REF_RCMI, 0x580), - INTC_VECT(REF_ROVI, 0x5a0), + INTC_VECT(REF, 0x580), + INTC_VECT(REF, 0x5a0), #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) /* IRQ0->5 are handled in setup-sh3.c */ - INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), - INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820), + INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860), INTC_VECT(ADC_ADI, 0x980), - INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), - INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960), + INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920), + INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960), #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), - INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), - INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0), + INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0), #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) INTC_VECT(LCDC, 0x9a0), @@ -71,16 +63,6 @@ static struct intc_vect vectors[] __initdata = { #endif }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(REF, REF_RCMI, REF_ROVI), - INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), - INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } }, @@ -101,7 +83,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { #endif }; -static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL, NULL, prio_registers, NULL); static struct resource rtc_resources[] = { @@ -111,14 +93,6 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { .start = 20, .flags = IORESOURCE_IRQ, }, @@ -136,7 +110,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffffe80, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, + .irqs = { 23, 23, 23, 0 }, }, #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -145,7 +119,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4000150, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, + .irqs = { 56, 56, 56, 56 }, }, #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -154,7 +128,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4000140, .flags = UPF_BOOT_AUTOCONF, .type = PORT_IRDA, - .irqs = { 52, 53, 55, 54 }, + .irqs = { 52, 52, 52, 52 }, }, #endif { -- cgit v1.2.3 From 0caedb02c4a02b6fd0f1a62dfeb917353d3c6162 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 19:20:32 +0900 Subject: sh: multiple vectors per irq - sh7705. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 61 +++++++++++------------------------ 1 file changed, 19 insertions(+), 42 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 6468ae86b944..63b67badd67e 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -1,7 +1,7 @@ /* * SH7705 Setup * - * Copyright (C) 2006, 2007 Paul Mundt + * Copyright (C) 2006 - 2009 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -21,51 +21,36 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, PINT07, PINT815, - DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, - SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - ADC_ADI, - USB_USI0, USB_USI1, + + DMAC, SCIF0, SCIF2, ADC_ADI, USB, + TPU0, TPU1, TPU2, TPU3, - TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - REF_RCMI, + TMU0, TMU1, TMU2, - /* interrupt groups */ - RTC, TMU2, DMAC, USB, SCIF2, SCIF0, + RTC, WDT, REF_RCMI, }; static struct intc_vect vectors[] __initdata = { /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), - INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), - INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), - INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), - INTC_VECT(SCIF0_TXI, 0x8e0), - INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), - INTC_VECT(SCIF2_TXI, 0x960), + INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820), + INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860), + INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0), + INTC_VECT(SCIF0, 0x8e0), + INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920), + INTC_VECT(SCIF2, 0x960), INTC_VECT(ADC_ADI, 0x980), - INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40), + INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40), INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20), INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), - INTC_GROUP(USB, USB_USI0, USB_USI1), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } }, @@ -78,7 +63,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; -static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL, NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { @@ -86,12 +71,12 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59 }, + .irqs = { 56, 56, 56 }, }, { .mapbase = 0xa4400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 52, 53, 55 }, + .irqs = { 52, 52, 52 }, }, { .flags = 0, } @@ -115,14 +100,6 @@ static struct resource rtc_resources[] = { .start = 20, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, }; static struct sh_rtc_platform_info rtc_info = { -- cgit v1.2.3 From 56d604defa91684509ac842317ea14501f224299 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 19:20:48 +0900 Subject: sh: multiple vectors per irq - sh7710. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh7710.c | 69 +++++++++++------------------------ 1 file changed, 21 insertions(+), 48 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 77eee481de47..335098b66e2f 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -1,7 +1,7 @@ /* * SH3 Setup code for SH7710, SH7712 * - * Copyright (C) 2006, 2007 Paul Mundt + * Copyright (C) 2006 - 2009 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -20,59 +20,40 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, - DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - DMAC_DEI4, DMAC_DEI5, - IPSEC, + DMAC1, SCIF0, SCIF1, DMAC2, IPSEC, EDMAC0, EDMAC1, EDMAC2, - SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI, - SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI, - TMU0, TMU1, TMU2, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - REF, + SIOF0, SIOF1, - /* interrupt groups */ - RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1, + TMU0, TMU1, TMU2, + RTC, WDT, REF, }; static struct intc_vect vectors[] __initdata = { /* IRQ0->5 are handled in setup-sh3.c */ - INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), - INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), - INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), - INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), - INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920), - INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960), - INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0), + INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820), + INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860), + INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0), + INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0), + INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920), + INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960), + INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0), #ifdef CONFIG_CPU_SUBTYPE_SH7710 INTC_VECT(IPSEC, 0xbe0), #endif INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20), INTC_VECT(EDMAC2, 0xc40), - INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20), - INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60), - INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0), - INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0), + INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20), + INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60), + INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0), + INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(REF, 0x580), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5), - INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI), - INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, @@ -85,7 +66,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL, NULL, prio_registers, NULL); static struct resource rtc_resources[] = { @@ -98,14 +79,6 @@ static struct resource rtc_resources[] = { .start = 20, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, }; static struct sh_rtc_platform_info rtc_info = { @@ -127,12 +100,12 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 52, 53, 55, 54 }, + .irqs = { 52, 52, 52, 52 }, }, { .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, + .irqs = { 56, 56, 56, 56 }, }, { .flags = 0, -- cgit v1.2.3 From edab56f4c90f45ba4e61d06d3fc9658da4e94bde Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Mar 2009 19:21:02 +0900 Subject: sh: multiple vectors per irq - sh7720. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 68 ++++++++++++----------------------- 1 file changed, 23 insertions(+), 45 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index f807a21b066c..003874a2fd2a 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -2,6 +2,7 @@ * SH7720 Setup * * Copyright (C) 2007 Markus Brunner, Mark Jonas + * Copyright (C) 2009 Paul Mundt * * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c: * @@ -26,17 +27,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 20, .flags = IORESOURCE_IRQ, }, @@ -150,62 +141,49 @@ enum { UNUSED = 0, /* interrupt sources */ - TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI, - WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + TMU0, TMU1, TMU2, RTC, + WDT, REF_RCMI, SIM, IRQ0, IRQ1, IRQ2, IRQ3, USBF_SPD, TMU_SUNI, IRQ5, IRQ4, - DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL, - ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT, + DMAC1, LCDC, SSL, + ADC, DMAC2, USBFI, CMT, SCIF0, SCIF1, - PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC, - SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC, + PINT07, PINT815, TPU, IIC, + SIOF0, SIOF1, MMC, PCC, USBHI, AFEIF, H_UDI, - /* interrupt groups */ - TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC, }; static struct intc_vect vectors[] __initdata = { /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480), - INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), - INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500), - INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540), + INTC_VECT(TMU2, 0x440), INTC_VECT(RTC, 0x480), + INTC_VECT(RTC, 0x4a0), INTC_VECT(RTC, 0x4c0), + INTC_VECT(SIM, 0x4e0), INTC_VECT(SIM, 0x500), + INTC_VECT(SIM, 0x520), INTC_VECT(SIM, 0x540), INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580), /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0), - INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800), - INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840), - INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900), + INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1, 0x800), + INTC_VECT(DMAC1, 0x820), INTC_VECT(DMAC1, 0x840), + INTC_VECT(DMAC1, 0x860), INTC_VECT(LCDC, 0x900), #if defined(CONFIG_CPU_SUBTYPE_SH7720) INTC_VECT(SSL, 0x980), #endif - INTC_VECT(USBFI0, 0xa20), INTC_VECT(USBFI1, 0xa40), + INTC_VECT(USBFI, 0xa20), INTC_VECT(USBFI, 0xa40), INTC_VECT(USBHI, 0xa60), - INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0), + INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0), INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80), INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00), - INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80), - INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0), - INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00), - INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0), - INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0), + INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU, 0xd80), + INTC_VECT(TPU, 0xda0), INTC_VECT(TPU, 0xdc0), + INTC_VECT(TPU, 0xde0), INTC_VECT(IIC, 0xe00), + INTC_VECT(MMC, 0xe80), INTC_VECT(MMC, 0xea0), + INTC_VECT(MMC, 0xec0), INTC_VECT(MMC, 0xee0), INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60), INTC_VECT(AFEIF, 0xfe0), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(TMU, TMU0, TMU1, TMU2), - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), - INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3), - INTC_GROUP(USBFI, USBFI0, USBFI1), - INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5), - INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3), - INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, @@ -219,7 +197,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL, NULL, prio_registers, NULL); void __init plat_irq_setup(void) -- cgit v1.2.3 From ee58a7ca21b2acf0d7ad0e1eb2f8d916ecf9fadc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 12:00:24 +0100 Subject: ALSA: hda - Connect to primary DAC if no individual DAC is available In stac92xx_auto_fill_dac_nids[], connect to the primary DAC if no individual DAC is available for each pin. This ensures that the pin works somehow at least. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index d19090fd2d13..ee119259183c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2871,6 +2871,16 @@ static hda_nid_t get_unassigned_dac(struct hda_codec *codec, hda_nid_t nid) return conn[j]; } } + /* if all DACs are already assigned, connect to the primary DAC */ + if (conn_len > 1) { + for (j = 0; j < conn_len; j++) { + if (conn[j] == spec->multiout.dac_nids[0]) { + snd_hda_codec_write_cache(codec, nid, 0, + AC_VERB_SET_CONNECT_SEL, j); + break; + } + } + } return 0; } -- cgit v1.2.3 From 139e071b0ff37800ed0a68b10c4bb325f51786eb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 12:10:41 +0100 Subject: ALSA: hda - Assign HP and speaker DACs before mic/line-in Assign DACs to HP and speaker before mic-in/line-in shared outputs. This improves the usability as it results in more intuitive mixer names. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ee119259183c..123bcf7c3b24 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2921,6 +2921,26 @@ static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec) add_spec_dacs(spec, dac); } + for (i = 0; i < cfg->hp_outs; i++) { + nid = cfg->hp_pins[i]; + dac = get_unassigned_dac(codec, nid); + if (dac) { + if (!spec->multiout.hp_nid) + spec->multiout.hp_nid = dac; + else + add_spec_extra_dacs(spec, dac); + } + spec->hp_dacs[i] = dac; + } + + for (i = 0; i < cfg->speaker_outs; i++) { + nid = cfg->speaker_pins[i]; + dac = get_unassigned_dac(codec, nid); + if (dac) + add_spec_extra_dacs(spec, dac); + spec->speaker_dacs[i] = dac; + } + /* add line-in as output */ nid = check_line_out_switch(codec); if (nid) { @@ -2948,26 +2968,6 @@ static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec) } } - for (i = 0; i < cfg->hp_outs; i++) { - nid = cfg->hp_pins[i]; - dac = get_unassigned_dac(codec, nid); - if (dac) { - if (!spec->multiout.hp_nid) - spec->multiout.hp_nid = dac; - else - add_spec_extra_dacs(spec, dac); - } - spec->hp_dacs[i] = dac; - } - - for (i = 0; i < cfg->speaker_outs; i++) { - nid = cfg->speaker_pins[i]; - dac = get_unassigned_dac(codec, nid); - if (dac) - add_spec_extra_dacs(spec, dac); - spec->speaker_dacs[i] = dac; - } - snd_printd("stac92xx: dac_nids=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n", spec->multiout.num_dacs, spec->multiout.dac_nids[0], -- cgit v1.2.3 From 90f349d96e1dc05b1f7916958282c30760eeacd6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 14:30:08 +0100 Subject: ALSA: ac97 - Add patch entry for Conexant CX20468-31 chip Added the patch entry for Conexant CX20468-31 chip (4358:5430). Reference: Novell bnc#471265 https://bugzilla.novell.com/show_bug.cgi?id=471265 Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index bc707b603852..44f2381b0aed 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -143,6 +143,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = { { 0x43525970, 0xfffffff8, "CS4202", NULL, NULL }, { 0x43585421, 0xffffffff, "HSD11246", NULL, NULL }, // SmartMC II { 0x43585428, 0xfffffff8, "Cx20468", patch_conexant, NULL }, // SmartAMC fixme: the mask might be different +{ 0x43585430, 0xffffffff, "Cx20468-31", patch_conexant, NULL }, { 0x43585431, 0xffffffff, "Cx20551", patch_cx20551, NULL }, { 0x44543031, 0xfffffff0, "DT0398", NULL, NULL }, { 0x454d4328, 0xffffffff, "EM28028", NULL, NULL }, // same as TR28028? -- cgit v1.2.3 From 979c036e090332cd3a090ce8b4eb50c3aa28dea0 Mon Sep 17 00:00:00 2001 From: "Lopez Cruz, Misael" Date: Wed, 4 Mar 2009 11:39:07 -0600 Subject: ASoC: Add DAPM machine widgets to SDP3430 driver Add DAPM machine domain widgets to SDP3430 machine driver. Interconnection: * Ext Mic: MAINMIC, SUBMIC * Ext Spk: HFL, HFR * Headset Jack: HSMIC, HSOL, HSOR Signed-off-by: Misael Lopez Cruz Signed-off-by: Mark Brown --- sound/soc/omap/sdp3430.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index e226fa75669c..4eab4b491dee 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -81,12 +81,76 @@ static struct snd_soc_ops sdp3430_ops = { .hw_params = sdp3430_hw_params, }; +/* SDP3430 machine DAPM */ +static const struct snd_soc_dapm_widget sdp3430_twl4030_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Ext Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), + SND_SOC_DAPM_HP("Headset Jack", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* External Mics: MAINMIC, SUBMIC with bias*/ + {"MAINMIC", NULL, "Mic Bias 1"}, + {"SUBMIC", NULL, "Mic Bias 2"}, + {"Mic Bias 1", NULL, "Ext Mic"}, + {"Mic Bias 2", NULL, "Ext Mic"}, + + /* External Speakers: HFL, HFR */ + {"Ext Spk", NULL, "HFL"}, + {"Ext Spk", NULL, "HFR"}, + + /* Headset: HSMIC (with bias), HSOL, HSOR */ + {"Headset Jack", NULL, "HSOL"}, + {"Headset Jack", NULL, "HSOR"}, + {"HSMIC", NULL, "Headset Mic Bias"}, + {"Headset Mic Bias", NULL, "Headset Jack"}, +}; + +static int sdp3430_twl4030_init(struct snd_soc_codec *codec) +{ + int ret; + + /* Add SDP3430 specific widgets */ + ret = snd_soc_dapm_new_controls(codec, sdp3430_twl4030_dapm_widgets, + ARRAY_SIZE(sdp3430_twl4030_dapm_widgets)); + if (ret) + return ret; + + /* Set up SDP3430 specific audio path audio_map */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* SDP3430 connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + snd_soc_dapm_enable_pin(codec, "Headset Jack"); + + /* TWL4030 not connected pins */ + snd_soc_dapm_nc_pin(codec, "AUXL"); + snd_soc_dapm_nc_pin(codec, "AUXR"); + snd_soc_dapm_nc_pin(codec, "CARKITMIC"); + snd_soc_dapm_nc_pin(codec, "DIGIMIC0"); + snd_soc_dapm_nc_pin(codec, "DIGIMIC1"); + + snd_soc_dapm_nc_pin(codec, "OUTL"); + snd_soc_dapm_nc_pin(codec, "OUTR"); + snd_soc_dapm_nc_pin(codec, "EARPIECE"); + snd_soc_dapm_nc_pin(codec, "PREDRIVEL"); + snd_soc_dapm_nc_pin(codec, "PREDRIVER"); + snd_soc_dapm_nc_pin(codec, "CARKITL"); + snd_soc_dapm_nc_pin(codec, "CARKITR"); + + ret = snd_soc_dapm_sync(codec); + + return ret; +} + /* Digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link sdp3430_dai = { .name = "TWL4030", .stream_name = "TWL4030", .cpu_dai = &omap_mcbsp_dai[0], .codec_dai = &twl4030_dai, + .init = sdp3430_twl4030_init, .ops = &sdp3430_ops, }; -- cgit v1.2.3 From 3093e48c48b69ccc06a1f78ffe7ece7ee2ee09ef Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 4 Mar 2009 00:49:27 +0000 Subject: ASoC: Add JIVE audio support Add support for the Jive's WM8750 codec attached via the S3C2412 IIS. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- sound/soc/s3c24xx/Kconfig | 9 ++ sound/soc/s3c24xx/Makefile | 2 + sound/soc/s3c24xx/jive_wm8750.c | 216 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 227 insertions(+) create mode 100644 sound/soc/s3c24xx/jive_wm8750.c diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index e05a71084c32..7803218d1903 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -26,6 +26,15 @@ config SND_S3C24XX_SOC_NEO1973_WM8753 Say Y if you want to add support for SoC audio on smdk2440 with the WM8753. +config SND_S3C24XX_SOC_JIVE_WM8750 + tristate "SoC I2S Audio support for Jive" + depends on SND_S3C24XX_SOC && MACH_JIVE + select SND_SOC_WM8750 + select SND_SOC_WM8750_SPI + select SND_S3C2412_SOC_I2S + help + Sat Y if you want to add support for SoC audio on the Jive. + config SND_S3C24XX_SOC_SMDK2443_WM9710 tristate "SoC AC97 Audio support for SMDK2443 - WM9710" depends on SND_S3C24XX_SOC && MACH_SMDK2443 diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index 96b3f3f617d4..bc11976e269c 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -10,11 +10,13 @@ obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o # S3C24XX Machine Support +snd-soc-jive-wm8750-objs := jive_wm8750.o snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o +obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c new file mode 100644 index 000000000000..fe466c1f71ec --- /dev/null +++ b/sound/soc/s3c24xx/jive_wm8750.c @@ -0,0 +1,216 @@ +/* sound/soc/s3c24xx/jive_wm8750.c + * + * Copyright 2007,2008 Simtec Electronics + * + * Based on sound/soc/pxa/spitz.c + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "s3c24xx-pcm.h" +#include "s3c2412-i2s.h" + +#include "../codecs/wm8750.h" + +static const struct snd_soc_dapm_route audio_map[] = { + { "Headphone Jack", NULL, "LOUT1" }, + { "Headphone Jack", NULL, "ROUT1" }, + { "Internal Speaker", NULL, "LOUT2" }, + { "Internal Speaker", NULL, "ROUT2" }, + { "LINPUT1", NULL, "Line Input" }, + { "RINPUT1", NULL, "Line Input" }, +}; + +static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Internal Speaker", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), +}; + +static int jive_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->socdev->codec; + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Internal Speaker"); + snd_soc_dapm_enable_pin(codec, "Line In"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static int jive_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct s3c2412_rate_calc div; + unsigned int clk = 0; + int ret = 0; + + switch (params_rate(params)) { + case 8000: + case 16000: + case 48000: + case 96000: + clk = 12288000; + break; + case 11025: + case 22050: + case 44100: + clk = 11289600; + break; + } + + s3c2412_iis_calc_rate(&div, NULL, params_rate(params), + s3c2412_get_iisclk()); + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER, + div.clk_div - 1); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops jive_ops = { + .startup = jive_startup, + .hw_params = jive_hw_params, +}; + +static int jive_wm8750_init(struct snd_soc_codec *codec) +{ + int err; + + /* These endpoints are not being used. */ + snd_soc_dapm_disable_pin(codec, "LINPUT2"); + snd_soc_dapm_disable_pin(codec, "RINPUT2"); + snd_soc_dapm_disable_pin(codec, "LINPUT3"); + snd_soc_dapm_disable_pin(codec, "RINPUT3"); + snd_soc_dapm_disable_pin(codec, "OUT3"); + snd_soc_dapm_disable_pin(codec, "MONO"); + + /* Add jive specific widgets */ + err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets, + ARRAY_SIZE(wm8750_dapm_widgets)); + if (err) { + printk(KERN_ERR "%s: failed to add widgets (%d)\n", + __func__, err); + return err; + } + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link jive_dai = { + .name = "wm8750", + .stream_name = "WM8750", + .cpu_dai = &s3c2412_i2s_dai, + .codec_dai = &wm8750_dai, + .init = jive_wm8750_init, + .ops = &jive_ops, +}; + +/* jive audio machine driver */ +static struct snd_soc_machine snd_soc_machine_jive = { + .name = "Jive", + .dai_link = &jive_dai, + .num_links = 1, +}; + +/* jive audio private data */ +static struct wm8750_setup_data jive_wm8750_setup = { +}; + +/* jive audio subsystem */ +static struct snd_soc_device jive_snd_devdata = { + .machine = &snd_soc_machine_jive, + .platform = &s3c24xx_soc_platform, + .codec_dev = &soc_codec_dev_wm8750_spi, + .codec_data = &jive_wm8750_setup, +}; + +static struct platform_device *jive_snd_device; + +static int __init jive_init(void) +{ + int ret; + + if (!machine_is_jive()) + return 0; + + printk("JIVE WM8750 Audio support\n"); + + jive_snd_device = platform_device_alloc("soc-audio", -1); + if (!jive_snd_device) + return -ENOMEM; + + platform_set_drvdata(jive_snd_device, &jive_snd_devdata); + jive_snd_devdata.dev = &jive_snd_device->dev; + ret = platform_device_add(jive_snd_device); + + if (ret) + platform_device_put(jive_snd_device); + + return ret; +} + +static void __exit jive_exit(void) +{ + platform_device_unregister(jive_snd_device); +} + +module_init(jive_init); +module_exit(jive_exit); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("ALSA SoC Jive Audio support"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From dc85447b196a683784eb85654c436fd58c3e2ed1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 4 Mar 2009 00:49:30 +0000 Subject: ASoC: Split s3c2412-i2s.c into core and SoC specific parts The S3C2412 I2S (IIS) interface is replicated on further Samsung SoC parts in a broadly compatible way, so split the common code out into a core called s3c-i2s-v2.[ch] so that the newer SoCs such as the S3C6410 can make use of it. As such, all the original s3c2412 functions are currently being left with their original names, and will be renamed later in the series. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- sound/soc/s3c24xx/Kconfig | 4 + sound/soc/s3c24xx/Makefile | 2 + sound/soc/s3c24xx/jive_wm8750.c | 6 +- sound/soc/s3c24xx/s3c-i2s-v2.c | 645 ++++++++++++++++++++++++++++++++++++++++ sound/soc/s3c24xx/s3c-i2s-v2.h | 90 ++++++ sound/soc/s3c24xx/s3c2412-i2s.c | 596 ++----------------------------------- sound/soc/s3c24xx/s3c2412-i2s.h | 17 +- 7 files changed, 767 insertions(+), 593 deletions(-) create mode 100644 sound/soc/s3c24xx/s3c-i2s-v2.c create mode 100644 sound/soc/s3c24xx/s3c-i2s-v2.h diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 7803218d1903..bd98adaa5b0b 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -9,8 +9,12 @@ config SND_S3C24XX_SOC config SND_S3C24XX_SOC_I2S tristate +config SND_S3C_I2SV2_SOC + tristate + config SND_S3C2412_SOC_I2S tristate + select SND_S3C_I2SV2_SOC config SND_S3C2443_SOC_AC97 tristate diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index bc11976e269c..848981e18ac3 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -3,11 +3,13 @@ snd-soc-s3c24xx-objs := s3c24xx-pcm.o snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o +snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o +obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o # S3C24XX Machine Support snd-soc-jive-wm8750-objs := jive_wm8750.o diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c index fe466c1f71ec..7dfe26ea8f40 100644 --- a/sound/soc/s3c24xx/jive_wm8750.c +++ b/sound/soc/s3c24xx/jive_wm8750.c @@ -65,7 +65,7 @@ static int jive_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - struct s3c2412_rate_calc div; + struct s3c_i2sv2_rate_calc div; unsigned int clk = 0; int ret = 0; @@ -83,8 +83,8 @@ static int jive_hw_params(struct snd_pcm_substream *substream, break; } - s3c2412_iis_calc_rate(&div, NULL, params_rate(params), - s3c2412_get_iisclk()); + s3c_i2sv2_calc_rate(&div, NULL, params_rate(params), + s3c2412_get_iisclk()); /* set codec DAI configuration */ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c new file mode 100644 index 000000000000..43262e1e8f98 --- /dev/null +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -0,0 +1,645 @@ +/* sound/soc/s3c24xx/s3c-i2c-v2.c + * + * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs. + * + * Copyright (c) 2006 Wolfson Microelectronics PLC. + * Graeme Gregory graeme.gregory@wolfsonmicro.com + * linux@wolfsonmicro.com + * + * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "s3c-i2s-v2.h" + +#define S3C2412_I2S_DEBUG_CON 0 +#define S3C2412_I2S_DEBUG 0 + +#if S3C2412_I2S_DEBUG +#define DBG(x...) printk(KERN_INFO x) +#else +#define DBG(x...) do { } while (0) +#endif + +static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) +{ + return cpu_dai->private_data; +} + +#define bit_set(v, b) (((v) & (b)) ? 1 : 0) + +#if S3C2412_I2S_DEBUG_CON +static void dbg_showcon(const char *fn, u32 con) +{ + printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn, + bit_set(con, S3C2412_IISCON_LRINDEX), + bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY), + bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY), + bit_set(con, S3C2412_IISCON_TXFIFO_FULL), + bit_set(con, S3C2412_IISCON_RXFIFO_FULL)); + + printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n", + fn, + bit_set(con, S3C2412_IISCON_TXDMA_PAUSE), + bit_set(con, S3C2412_IISCON_RXDMA_PAUSE), + bit_set(con, S3C2412_IISCON_TXCH_PAUSE), + bit_set(con, S3C2412_IISCON_RXCH_PAUSE)); + printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn, + bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE), + bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE), + bit_set(con, S3C2412_IISCON_IIS_ACTIVE)); +} +#else +static inline void dbg_showcon(const char *fn, u32 con) +{ +} +#endif + + +/* Turn on or off the transmission path. */ +void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) +{ + void __iomem *regs = i2s->regs; + u32 fic, con, mod; + + DBG("%s(%d)\n", __func__, on); + + fic = readl(regs + S3C2412_IISFIC); + con = readl(regs + S3C2412_IISCON); + mod = readl(regs + S3C2412_IISMOD); + + DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + + if (on) { + con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; + con &= ~S3C2412_IISCON_TXDMA_PAUSE; + con &= ~S3C2412_IISCON_TXCH_PAUSE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_TXONLY: + case S3C2412_IISMOD_MODE_TXRX: + /* do nothing, we are in the right mode */ + break; + + case S3C2412_IISMOD_MODE_RXONLY: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_TXRX; + break; + + default: + dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n"); + } + + writel(con, regs + S3C2412_IISCON); + writel(mod, regs + S3C2412_IISMOD); + } else { + /* Note, we do not have any indication that the FIFO problems + * tha the S3C2410/2440 had apply here, so we should be able + * to disable the DMA and TX without resetting the FIFOS. + */ + + con |= S3C2412_IISCON_TXDMA_PAUSE; + con |= S3C2412_IISCON_TXCH_PAUSE; + con &= ~S3C2412_IISCON_TXDMA_ACTIVE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_TXRX: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_RXONLY; + break; + + case S3C2412_IISMOD_MODE_TXONLY: + mod &= ~S3C2412_IISMOD_MODE_MASK; + con &= ~S3C2412_IISCON_IIS_ACTIVE; + break; + + default: + dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n"); + } + + writel(mod, regs + S3C2412_IISMOD); + writel(con, regs + S3C2412_IISCON); + } + + fic = readl(regs + S3C2412_IISFIC); + dbg_showcon(__func__, con); + DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); +} +EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl); + +void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) +{ + void __iomem *regs = i2s->regs; + u32 fic, con, mod; + + DBG("%s(%d)\n", __func__, on); + + fic = readl(regs + S3C2412_IISFIC); + con = readl(regs + S3C2412_IISCON); + mod = readl(regs + S3C2412_IISMOD); + + DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + + if (on) { + con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; + con &= ~S3C2412_IISCON_RXDMA_PAUSE; + con &= ~S3C2412_IISCON_RXCH_PAUSE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_TXRX: + case S3C2412_IISMOD_MODE_RXONLY: + /* do nothing, we are in the right mode */ + break; + + case S3C2412_IISMOD_MODE_TXONLY: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_TXRX; + break; + + default: + dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n"); + } + + writel(mod, regs + S3C2412_IISMOD); + writel(con, regs + S3C2412_IISCON); + } else { + /* See txctrl notes on FIFOs. */ + + con &= ~S3C2412_IISCON_RXDMA_ACTIVE; + con |= S3C2412_IISCON_RXDMA_PAUSE; + con |= S3C2412_IISCON_RXCH_PAUSE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_RXONLY: + con &= ~S3C2412_IISCON_IIS_ACTIVE; + mod &= ~S3C2412_IISMOD_MODE_MASK; + break; + + case S3C2412_IISMOD_MODE_TXRX: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_TXONLY; + break; + + default: + dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n"); + } + + writel(con, regs + S3C2412_IISCON); + writel(mod, regs + S3C2412_IISMOD); + } + + fic = readl(regs + S3C2412_IISFIC); + DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); +} +EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl); + +/* + * Wait for the LR signal to allow synchronisation to the L/R clock + * from the codec. May only be needed for slave mode. + */ +static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s) +{ + u32 iiscon; + unsigned long timeout = jiffies + msecs_to_jiffies(5); + + DBG("Entered %s\n", __func__); + + while (1) { + iiscon = readl(i2s->regs + S3C2412_IISCON); + if (iiscon & S3C2412_IISCON_LRINDEX) + break; + + if (timeout < jiffies) { + printk(KERN_ERR "%s: timeout\n", __func__); + return -ETIMEDOUT; + } + } + + return 0; +} + +/* + * Set S3C2412 I2S DAI format + */ +static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 iismod; + + DBG("Entered %s\n", __func__); + + iismod = readl(i2s->regs + S3C2412_IISMOD); + DBG("hw_params r: IISMOD: %x \n", iismod); + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#define IISMOD_MASTER_MASK S3C2412_IISMOD_MASTER_MASK +#define IISMOD_SLAVE S3C2412_IISMOD_SLAVE +#define IISMOD_MASTER S3C2412_IISMOD_MASTER_INTERNAL +#endif + +#if defined(CONFIG_PLAT_S3C64XX) +/* From Rev1.1 datasheet, we have two master and two slave modes: + * IMS[11:10]: + * 00 = master mode, fed from PCLK + * 01 = master mode, fed from CLKAUDIO + * 10 = slave mode, using PCLK + * 11 = slave mode, using I2SCLK + */ +#define IISMOD_MASTER_MASK (1 << 11) +#define IISMOD_SLAVE (1 << 11) +#define IISMOD_MASTER (0x0) +#endif + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + i2s->master = 0; + iismod &= ~IISMOD_MASTER_MASK; + iismod |= IISMOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBS_CFS: + i2s->master = 1; + iismod &= ~IISMOD_MASTER_MASK; + iismod |= IISMOD_MASTER; + break; + default: + DBG("unknwon master/slave format\n"); + return -EINVAL; + } + + iismod &= ~S3C2412_IISMOD_SDF_MASK; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + iismod |= S3C2412_IISMOD_SDF_MSB; + break; + case SND_SOC_DAIFMT_LEFT_J: + iismod |= S3C2412_IISMOD_SDF_LSB; + break; + case SND_SOC_DAIFMT_I2S: + iismod |= S3C2412_IISMOD_SDF_IIS; + break; + default: + DBG("Unknown data format\n"); + return -EINVAL; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + DBG("hw_params w: IISMOD: %x \n", iismod); + return 0; +} + +static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *socdai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai_link *dai = rtd->dai; + struct s3c_i2sv2_info *i2s = to_info(dai->cpu_dai); + u32 iismod; + + DBG("Entered %s\n", __func__); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dai->cpu_dai->dma_data = i2s->dma_playback; + else + dai->cpu_dai->dma_data = i2s->dma_capture; + + /* Working copies of register */ + iismod = readl(i2s->regs + S3C2412_IISMOD); + DBG("%s: r: IISMOD: %x\n", __func__, iismod); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + iismod |= S3C2412_IISMOD_8BIT; + break; + case SNDRV_PCM_FORMAT_S16_LE: + iismod &= ~S3C2412_IISMOD_8BIT; + break; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + DBG("%s: w: IISMOD: %x\n", __func__, iismod); + return 0; +} + +static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_i2sv2_info *i2s = to_info(rtd->dai->cpu_dai); + int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + unsigned long irqs; + int ret = 0; + + DBG("Entered %s\n", __func__); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* On start, ensure that the FIFOs are cleared and reset. */ + + writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH, + i2s->regs + S3C2412_IISFIC); + + /* clear again, just in case */ + writel(0x0, i2s->regs + S3C2412_IISFIC); + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (!i2s->master) { + ret = s3c2412_snd_lrsync(i2s); + if (ret) + goto exit_err; + } + + local_irq_save(irqs); + + if (capture) + s3c2412_snd_rxctrl(i2s, 1); + else + s3c2412_snd_txctrl(i2s, 1); + + local_irq_restore(irqs); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + local_irq_save(irqs); + + if (capture) + s3c2412_snd_rxctrl(i2s, 0); + else + s3c2412_snd_txctrl(i2s, 0); + + local_irq_restore(irqs); + break; + default: + ret = -EINVAL; + break; + } + +exit_err: + return ret; +} + +/* + * Set S3C2412 Clock dividers + */ +static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 reg; + + DBG("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div); + + switch (div_id) { + case S3C_I2SV2_DIV_BCLK: + reg = readl(i2s->regs + S3C2412_IISMOD); + reg &= ~S3C2412_IISMOD_BCLK_MASK; + writel(reg | div, i2s->regs + S3C2412_IISMOD); + + DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); + break; + + case S3C_I2SV2_DIV_RCLK: + if (div > 3) { + /* convert value to bit field */ + + switch (div) { + case 256: + div = S3C2412_IISMOD_RCLK_256FS; + break; + + case 384: + div = S3C2412_IISMOD_RCLK_384FS; + break; + + case 512: + div = S3C2412_IISMOD_RCLK_512FS; + break; + + case 768: + div = S3C2412_IISMOD_RCLK_768FS; + break; + + default: + return -EINVAL; + } + } + + reg = readl(i2s->regs + S3C2412_IISMOD); + reg &= ~S3C2412_IISMOD_RCLK_MASK; + writel(reg | div, i2s->regs + S3C2412_IISMOD); + DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); + break; + + case S3C_I2SV2_DIV_PRESCALER: + if (div >= 0) { + writel((div << 8) | S3C2412_IISPSR_PSREN, + i2s->regs + S3C2412_IISPSR); + } else { + writel(0x0, i2s->regs + S3C2412_IISPSR); + } + DBG("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR)); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* default table of all avaialable root fs divisors */ +static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 }; + +int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, + unsigned int *fstab, + unsigned int rate, struct clk *clk) +{ + unsigned long clkrate = clk_get_rate(clk); + unsigned int div; + unsigned int fsclk; + unsigned int actual; + unsigned int fs; + unsigned int fsdiv; + signed int deviation = 0; + unsigned int best_fs = 0; + unsigned int best_div = 0; + unsigned int best_rate = 0; + unsigned int best_deviation = INT_MAX; + + if (fstab == NULL) + fstab = iis_fs_tab; + + for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) { + fsdiv = iis_fs_tab[fs]; + + fsclk = clkrate / fsdiv; + div = fsclk / rate; + + if ((fsclk % rate) > (rate / 2)) + div++; + + if (div <= 1) + continue; + + actual = clkrate / (fsdiv * div); + deviation = actual - rate; + + printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n", + fsdiv, div, actual, deviation); + + deviation = abs(deviation); + + if (deviation < best_deviation) { + best_fs = fsdiv; + best_div = div; + best_rate = actual; + best_deviation = deviation; + } + + if (deviation == 0) + break; + } + + printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n", + best_fs, best_div, best_rate); + + info->fs_div = best_fs; + info->clk_div = best_div; + + return 0; +} +EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate); + +int s3c_i2sv2_probe(struct platform_device *pdev, + struct snd_soc_dai *dai, + struct s3c_i2sv2_info *i2s, + unsigned long base) +{ + struct device *dev = &pdev->dev; + + i2s->dev = dev; + + /* record our i2s structure for later use in the callbacks */ + dai->private_data = i2s; + + i2s->regs = ioremap(base, 0x100); + if (i2s->regs == NULL) { + dev_err(dev, "cannot ioremap registers\n"); + return -ENXIO; + } + + i2s->iis_pclk = clk_get(dev, "iis"); + if (i2s->iis_pclk == NULL) { + DBG("failed to get iis_clock\n"); + iounmap(i2s->regs); + return -ENOENT; + } + + clk_enable(i2s->iis_pclk); + + s3c2412_snd_txctrl(i2s, 0); + s3c2412_snd_rxctrl(i2s, 0); + + return 0; +} + +EXPORT_SYMBOL_GPL(s3c_i2sv2_probe); + +#ifdef CONFIG_PM +static int s3c2412_i2s_suspend(struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + u32 iismod; + + if (dai->active) { + i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD); + i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON); + i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR); + + /* some basic suspend checks */ + + iismod = readl(i2s->regs + S3C2412_IISMOD); + + if (iismod & S3C2412_IISCON_RXDMA_ACTIVE) + pr_warning("%s: RXDMA active?\n", __func__); + + if (iismod & S3C2412_IISCON_TXDMA_ACTIVE) + pr_warning("%s: TXDMA active?\n", __func__); + + if (iismod & S3C2412_IISCON_IIS_ACTIVE) + pr_warning("%s: IIS active\n", __func__); + } + + return 0; +} + +static int s3c2412_i2s_resume(struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + + pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n", + dai->active, i2s->suspend_iismod, i2s->suspend_iiscon); + + if (dai->active) { + writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON); + writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD); + writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR); + + writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH, + i2s->regs + S3C2412_IISFIC); + + ndelay(250); + writel(0x0, i2s->regs + S3C2412_IISFIC); + } + + return 0; +} +#else +#define s3c2412_i2s_suspend NULL +#define s3c2412_i2s_resume NULL +#endif + +int s3c_i2sv2_register_dai(struct snd_soc_dai *dai) +{ + dai->ops.trigger = s3c2412_i2s_trigger; + dai->ops.hw_params = s3c2412_i2s_hw_params; + dai->ops.set_fmt = s3c2412_i2s_set_fmt; + dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv; + + dai->suspend = s3c2412_i2s_suspend; + dai->resume = s3c2412_i2s_resume; + + return snd_soc_register_dai(dai); +} + +EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai); diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.h b/sound/soc/s3c24xx/s3c-i2s-v2.h new file mode 100644 index 000000000000..f66854a77fb2 --- /dev/null +++ b/sound/soc/s3c24xx/s3c-i2s-v2.h @@ -0,0 +1,90 @@ +/* sound/soc/s3c24xx/s3c-i2s-v2.h + * + * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver + * + * Copyright (c) 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. +*/ + +/* This code is the core support for the I2S block found in a number of + * Samsung SoC devices which is unofficially named I2S-V2. Currently the + * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S + * channels via configurable GPIO. + */ + +#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H +#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__ + +#define S3C_I2SV2_DIV_BCLK (1) +#define S3C_I2SV2_DIV_RCLK (2) +#define S3C_I2SV2_DIV_PRESCALER (3) + +/** + * struct s3c_i2sv2_info - S3C I2S-V2 information + * @dev: The parent device passed to use from the probe. + * @regs: The pointer to the device registe block. + * @master: True if the I2S core is the I2S bit clock master. + * @dma_playback: DMA information for playback channel. + * @dma_capture: DMA information for capture channel. + * @suspend_iismod: PM save for the IISMOD register. + * @suspend_iiscon: PM save for the IISCON register. + * @suspend_iispsr: PM save for the IISPSR register. + * + * This is the private codec state for the hardware associated with an + * I2S channel such as the register mappings and clock sources. + */ +struct s3c_i2sv2_info { + struct device *dev; + void __iomem *regs; + + struct clk *iis_pclk; + struct clk *iis_cclk; + struct clk *iis_clk; + + unsigned char master; + + struct s3c24xx_pcm_dma_params *dma_playback; + struct s3c24xx_pcm_dma_params *dma_capture; + + u32 suspend_iismod; + u32 suspend_iiscon; + u32 suspend_iispsr; +}; + +struct s3c_i2sv2_rate_calc { + unsigned int clk_div; /* for prescaler */ + unsigned int fs_div; /* for root frame clock */ +}; + +extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, + unsigned int *fstab, + unsigned int rate, struct clk *clk); + +/** + * s3c_i2sv2_probe - probe for i2s device helper + * @pdev: The platform device supplied to the original probe. + * @dai: The ASoC DAI structure supplied to the original probe. + * @i2s: Our local i2s structure to fill in. + * @base: The base address for the registers. + */ +extern int s3c_i2sv2_probe(struct platform_device *pdev, + struct snd_soc_dai *dai, + struct s3c_i2sv2_info *i2s, + unsigned long base); + +/** + * s3c_i2sv2_register_dai - register dai with soc core + * @dai: The snd_soc_dai structure to register + * + * Fill in any missing fields and then register the given dai with the + * soc core. + */ +extern int s3c_i2sv2_register_dai(struct snd_soc_dai *dai); + +#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */ diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index 3297698ff294..5099d9396676 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -33,7 +33,7 @@ #include -#include +#include #include #include @@ -41,7 +41,6 @@ #include "s3c2412-i2s.h" #define S3C2412_I2S_DEBUG 0 -#define S3C2412_I2S_DEBUG_CON 0 #if S3C2412_I2S_DEBUG #define DBG(x...) printk(KERN_INFO x) @@ -71,431 +70,7 @@ static struct s3c24xx_pcm_dma_params s3c2412_i2s_pcm_stereo_in = { .dma_size = 4, }; -struct s3c2412_i2s_info { - struct device *dev; - void __iomem *regs; - struct clk *iis_clk; - struct clk *iis_pclk; - struct clk *iis_cclk; - - u32 suspend_iismod; - u32 suspend_iiscon; - u32 suspend_iispsr; -}; - -static struct s3c2412_i2s_info s3c2412_i2s; - -#define bit_set(v, b) (((v) & (b)) ? 1 : 0) - -#if S3C2412_I2S_DEBUG_CON -static void dbg_showcon(const char *fn, u32 con) -{ - printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn, - bit_set(con, S3C2412_IISCON_LRINDEX), - bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY), - bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY), - bit_set(con, S3C2412_IISCON_TXFIFO_FULL), - bit_set(con, S3C2412_IISCON_RXFIFO_FULL)); - - printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n", - fn, - bit_set(con, S3C2412_IISCON_TXDMA_PAUSE), - bit_set(con, S3C2412_IISCON_RXDMA_PAUSE), - bit_set(con, S3C2412_IISCON_TXCH_PAUSE), - bit_set(con, S3C2412_IISCON_RXCH_PAUSE)); - printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn, - bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE), - bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE), - bit_set(con, S3C2412_IISCON_IIS_ACTIVE)); -} -#else -static inline void dbg_showcon(const char *fn, u32 con) -{ -} -#endif - -/* Turn on or off the transmission path. */ -static void s3c2412_snd_txctrl(int on) -{ - struct s3c2412_i2s_info *i2s = &s3c2412_i2s; - void __iomem *regs = i2s->regs; - u32 fic, con, mod; - - DBG("%s(%d)\n", __func__, on); - - fic = readl(regs + S3C2412_IISFIC); - con = readl(regs + S3C2412_IISCON); - mod = readl(regs + S3C2412_IISMOD); - - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); - - if (on) { - con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; - con &= ~S3C2412_IISCON_TXDMA_PAUSE; - con &= ~S3C2412_IISCON_TXCH_PAUSE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_TXONLY: - case S3C2412_IISMOD_MODE_TXRX: - /* do nothing, we are in the right mode */ - break; - - case S3C2412_IISMOD_MODE_RXONLY: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_TXRX; - break; - - default: - dev_err(i2s->dev, "TXEN: Invalid MODE in IISMOD\n"); - } - - writel(con, regs + S3C2412_IISCON); - writel(mod, regs + S3C2412_IISMOD); - } else { - /* Note, we do not have any indication that the FIFO problems - * tha the S3C2410/2440 had apply here, so we should be able - * to disable the DMA and TX without resetting the FIFOS. - */ - - con |= S3C2412_IISCON_TXDMA_PAUSE; - con |= S3C2412_IISCON_TXCH_PAUSE; - con &= ~S3C2412_IISCON_TXDMA_ACTIVE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_TXRX: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_RXONLY; - break; - - case S3C2412_IISMOD_MODE_TXONLY: - mod &= ~S3C2412_IISMOD_MODE_MASK; - con &= ~S3C2412_IISCON_IIS_ACTIVE; - break; - - default: - dev_err(i2s->dev, "TXDIS: Invalid MODE in IISMOD\n"); - } - - writel(mod, regs + S3C2412_IISMOD); - writel(con, regs + S3C2412_IISCON); - } - - fic = readl(regs + S3C2412_IISFIC); - dbg_showcon(__func__, con); - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); -} - -static void s3c2412_snd_rxctrl(int on) -{ - struct s3c2412_i2s_info *i2s = &s3c2412_i2s; - void __iomem *regs = i2s->regs; - u32 fic, con, mod; - - DBG("%s(%d)\n", __func__, on); - - fic = readl(regs + S3C2412_IISFIC); - con = readl(regs + S3C2412_IISCON); - mod = readl(regs + S3C2412_IISMOD); - - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); - - if (on) { - con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; - con &= ~S3C2412_IISCON_RXDMA_PAUSE; - con &= ~S3C2412_IISCON_RXCH_PAUSE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_TXRX: - case S3C2412_IISMOD_MODE_RXONLY: - /* do nothing, we are in the right mode */ - break; - - case S3C2412_IISMOD_MODE_TXONLY: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_TXRX; - break; - - default: - dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n"); - } - - writel(mod, regs + S3C2412_IISMOD); - writel(con, regs + S3C2412_IISCON); - } else { - /* See txctrl notes on FIFOs. */ - - con &= ~S3C2412_IISCON_RXDMA_ACTIVE; - con |= S3C2412_IISCON_RXDMA_PAUSE; - con |= S3C2412_IISCON_RXCH_PAUSE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_RXONLY: - con &= ~S3C2412_IISCON_IIS_ACTIVE; - mod &= ~S3C2412_IISMOD_MODE_MASK; - break; - - case S3C2412_IISMOD_MODE_TXRX: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_TXONLY; - break; - - default: - dev_err(i2s->dev, "RXEN: Invalid MODE in IISMOD\n"); - } - - writel(con, regs + S3C2412_IISCON); - writel(mod, regs + S3C2412_IISMOD); - } - - fic = readl(regs + S3C2412_IISFIC); - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); -} - - -/* - * Wait for the LR signal to allow synchronisation to the L/R clock - * from the codec. May only be needed for slave mode. - */ -static int s3c2412_snd_lrsync(void) -{ - u32 iiscon; - unsigned long timeout = jiffies + msecs_to_jiffies(5); - - DBG("Entered %s\n", __func__); - - while (1) { - iiscon = readl(s3c2412_i2s.regs + S3C2412_IISCON); - if (iiscon & S3C2412_IISCON_LRINDEX) - break; - - if (timeout < jiffies) { - printk(KERN_ERR "%s: timeout\n", __func__); - return -ETIMEDOUT; - } - } - - return 0; -} - -/* - * Check whether CPU is the master or slave - */ -static inline int s3c2412_snd_is_clkmaster(void) -{ - u32 iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD); - - DBG("Entered %s\n", __func__); - - iismod &= S3C2412_IISMOD_MASTER_MASK; - return !(iismod == S3C2412_IISMOD_SLAVE); -} - -/* - * Set S3C2412 I2S DAI format - */ -static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - u32 iismod; - - - DBG("Entered %s\n", __func__); - - iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD); - DBG("hw_params r: IISMOD: %x \n", iismod); - - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: - iismod &= ~S3C2412_IISMOD_MASTER_MASK; - iismod |= S3C2412_IISMOD_SLAVE; - break; - case SND_SOC_DAIFMT_CBS_CFS: - iismod &= ~S3C2412_IISMOD_MASTER_MASK; - iismod |= S3C2412_IISMOD_MASTER_INTERNAL; - break; - default: - DBG("unknwon master/slave format\n"); - return -EINVAL; - } - - iismod &= ~S3C2412_IISMOD_SDF_MASK; - - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_RIGHT_J: - iismod |= S3C2412_IISMOD_SDF_MSB; - break; - case SND_SOC_DAIFMT_LEFT_J: - iismod |= S3C2412_IISMOD_SDF_LSB; - break; - case SND_SOC_DAIFMT_I2S: - iismod |= S3C2412_IISMOD_SDF_IIS; - break; - default: - DBG("Unknown data format\n"); - return -EINVAL; - } - - writel(iismod, s3c2412_i2s.regs + S3C2412_IISMOD); - DBG("hw_params w: IISMOD: %x \n", iismod); - return 0; -} - -static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - u32 iismod; - - DBG("Entered %s\n", __func__); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - rtd->dai->cpu_dai->dma_data = &s3c2412_i2s_pcm_stereo_out; - else - rtd->dai->cpu_dai->dma_data = &s3c2412_i2s_pcm_stereo_in; - - /* Working copies of register */ - iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD); - DBG("%s: r: IISMOD: %x\n", __func__, iismod); - - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - iismod |= S3C2412_IISMOD_8BIT; - break; - case SNDRV_PCM_FORMAT_S16_LE: - iismod &= ~S3C2412_IISMOD_8BIT; - break; - } - - writel(iismod, s3c2412_i2s.regs + S3C2412_IISMOD); - DBG("%s: w: IISMOD: %x\n", __func__, iismod); - return 0; -} - -static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); - unsigned long irqs; - int ret = 0; - - DBG("Entered %s\n", __func__); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - /* On start, ensure that the FIFOs are cleared and reset. */ - - writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH, - s3c2412_i2s.regs + S3C2412_IISFIC); - - /* clear again, just in case */ - writel(0x0, s3c2412_i2s.regs + S3C2412_IISFIC); - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (!s3c2412_snd_is_clkmaster()) { - ret = s3c2412_snd_lrsync(); - if (ret) - goto exit_err; - } - - local_irq_save(irqs); - - if (capture) - s3c2412_snd_rxctrl(1); - else - s3c2412_snd_txctrl(1); - - local_irq_restore(irqs); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - local_irq_save(irqs); - - if (capture) - s3c2412_snd_rxctrl(0); - else - s3c2412_snd_txctrl(0); - - local_irq_restore(irqs); - break; - default: - ret = -EINVAL; - break; - } - -exit_err: - return ret; -} - -/* default table of all avaialable root fs divisors */ -static unsigned int s3c2412_iis_fs[] = { 256, 512, 384, 768, 0 }; - -int s3c2412_iis_calc_rate(struct s3c2412_rate_calc *info, - unsigned int *fstab, - unsigned int rate, struct clk *clk) -{ - unsigned long clkrate = clk_get_rate(clk); - unsigned int div; - unsigned int fsclk; - unsigned int actual; - unsigned int fs; - unsigned int fsdiv; - signed int deviation = 0; - unsigned int best_fs = 0; - unsigned int best_div = 0; - unsigned int best_rate = 0; - unsigned int best_deviation = INT_MAX; - - - if (fstab == NULL) - fstab = s3c2412_iis_fs; - - for (fs = 0;; fs++) { - fsdiv = s3c2412_iis_fs[fs]; - - if (fsdiv == 0) - break; - - fsclk = clkrate / fsdiv; - div = fsclk / rate; - - if ((fsclk % rate) > (rate / 2)) - div++; - - if (div <= 1) - continue; - - actual = clkrate / (fsdiv * div); - deviation = actual - rate; - - printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n", - fsdiv, div, actual, deviation); - - deviation = abs(deviation); - - if (deviation < best_deviation) { - best_fs = fsdiv; - best_div = div; - best_rate = actual; - best_deviation = deviation; - } - - if (deviation == 0) - break; - } - - printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n", - best_fs, best_div, best_rate); - - info->fs_div = best_fs; - info->clk_div = best_div; - - return 0; -} -EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate); +static struct s3c_i2sv2_info s3c2412_i2s; /* * Set S3C2412 Clock source @@ -510,10 +85,12 @@ static int s3c2412_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, switch (clk_id) { case S3C2412_CLKSRC_PCLK: + s3c2412_i2s.master = 1; iismod &= ~S3C2412_IISMOD_MASTER_MASK; iismod |= S3C2412_IISMOD_MASTER_INTERNAL; break; case S3C2412_CLKSRC_I2SCLK: + s3c2412_i2s.master = 0; iismod &= ~S3C2412_IISMOD_MASTER_MASK; iismod |= S3C2412_IISMOD_MASTER_EXTERNAL; break; @@ -525,74 +102,6 @@ static int s3c2412_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, return 0; } -/* - * Set S3C2412 Clock dividers - */ -static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct s3c2412_i2s_info *i2s = &s3c2412_i2s; - u32 reg; - - DBG("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div); - - switch (div_id) { - case S3C2412_DIV_BCLK: - reg = readl(i2s->regs + S3C2412_IISMOD); - reg &= ~S3C2412_IISMOD_BCLK_MASK; - writel(reg | div, i2s->regs + S3C2412_IISMOD); - - DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); - break; - - case S3C2412_DIV_RCLK: - if (div > 3) { - /* convert value to bit field */ - - switch (div) { - case 256: - div = S3C2412_IISMOD_RCLK_256FS; - break; - - case 384: - div = S3C2412_IISMOD_RCLK_384FS; - break; - - case 512: - div = S3C2412_IISMOD_RCLK_512FS; - break; - - case 768: - div = S3C2412_IISMOD_RCLK_768FS; - break; - - default: - return -EINVAL; - } - } - - reg = readl(s3c2412_i2s.regs + S3C2412_IISMOD); - reg &= ~S3C2412_IISMOD_RCLK_MASK; - writel(reg | div, i2s->regs + S3C2412_IISMOD); - DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); - break; - - case S3C2412_DIV_PRESCALER: - if (div >= 0) { - writel((div << 8) | S3C2412_IISPSR_PSREN, - i2s->regs + S3C2412_IISPSR); - } else { - writel(0x0, i2s->regs + S3C2412_IISPSR); - } - DBG("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR)); - break; - - default: - return -EINVAL; - } - - return 0; -} struct clk *s3c2412_get_iisclk(void) { @@ -604,20 +113,16 @@ EXPORT_SYMBOL_GPL(s3c2412_get_iisclk); static int s3c2412_i2s_probe(struct platform_device *pdev, struct snd_soc_dai *dai) { - DBG("Entered %s\n", __func__); + int ret; - s3c2412_i2s.dev = &pdev->dev; + DBG("Entered %s\n", __func__); - s3c2412_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100); - if (s3c2412_i2s.regs == NULL) - return -ENXIO; + ret = s3c_i2sv2_probe(pdev, dai, &s3c2412_i2s, S3C2410_PA_IIS); + if (ret) + return ret; - s3c2412_i2s.iis_pclk = clk_get(&pdev->dev, "iis"); - if (s3c2412_i2s.iis_pclk == NULL) { - DBG("failed to get iis_clock\n"); - iounmap(s3c2412_i2s.regs); - return -ENODEV; - } + s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in; + s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out; s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk"); if (s3c2412_i2s.iis_cclk == NULL) { @@ -626,12 +131,12 @@ static int s3c2412_i2s_probe(struct platform_device *pdev, return -ENODEV; } - clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll")); + /* Set MPLL as the source for IIS CLK */ - clk_enable(s3c2412_i2s.iis_pclk); + clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll")); clk_enable(s3c2412_i2s.iis_cclk); - s3c2412_i2s.iis_clk = s3c2412_i2s.iis_pclk; + s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk; /* Configure the I2S pins in correct mode */ s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK); @@ -640,78 +145,18 @@ static int s3c2412_i2s_probe(struct platform_device *pdev, s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI); s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO); - s3c2412_snd_txctrl(0); - s3c2412_snd_rxctrl(0); - - return 0; -} - -#ifdef CONFIG_PM -static int s3c2412_i2s_suspend(struct snd_soc_dai *dai) -{ - struct s3c2412_i2s_info *i2s = &s3c2412_i2s; - u32 iismod; - - if (dai->active) { - i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD); - i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON); - i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR); - - /* some basic suspend checks */ - - iismod = readl(i2s->regs + S3C2412_IISMOD); - - if (iismod & S3C2412_IISCON_RXDMA_ACTIVE) - pr_warning("%s: RXDMA active?\n", __func__); - - if (iismod & S3C2412_IISCON_TXDMA_ACTIVE) - pr_warning("%s: TXDMA active?\n", __func__); - - if (iismod & S3C2412_IISCON_IIS_ACTIVE) - pr_warning("%s: IIS active\n", __func__); - } - return 0; } -static int s3c2412_i2s_resume(struct snd_soc_dai *dai) -{ - struct s3c2412_i2s_info *i2s = &s3c2412_i2s; - - pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n", - dai->active, i2s->suspend_iismod, i2s->suspend_iiscon); - - if (dai->active) { - writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON); - writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD); - writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR); - - writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH, - i2s->regs + S3C2412_IISFIC); - - ndelay(250); - writel(0x0, i2s->regs + S3C2412_IISFIC); - - } - - return 0; -} -#else -#define s3c2412_i2s_suspend NULL -#define s3c2412_i2s_resume NULL -#endif /* CONFIG_PM */ - #define S3C2412_I2S_RATES \ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) struct snd_soc_dai s3c2412_i2s_dai = { - .name = "s3c2412-i2s", - .id = 0, - .probe = s3c2412_i2s_probe, - .suspend = s3c2412_i2s_suspend, - .resume = s3c2412_i2s_resume, + .name = "s3c2412-i2s", + .id = 0, + .probe = s3c2412_i2s_probe, .playback = { .channels_min = 2, .channels_max = 2, @@ -725,10 +170,6 @@ struct snd_soc_dai s3c2412_i2s_dai = { .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, }, .ops = { - .trigger = s3c2412_i2s_trigger, - .hw_params = s3c2412_i2s_hw_params, - .set_fmt = s3c2412_i2s_set_fmt, - .set_clkdiv = s3c2412_i2s_set_clkdiv, .set_sysclk = s3c2412_i2s_set_sysclk, }, }; @@ -736,7 +177,7 @@ EXPORT_SYMBOL_GPL(s3c2412_i2s_dai); static int __init s3c2412_i2s_init(void) { - return snd_soc_register_dai(&s3c2412_i2s_dai); + return s3c_i2sv2_register_dai(&s3c2412_i2s_dai); } module_init(s3c2412_i2s_init); @@ -746,7 +187,6 @@ static void __exit s3c2412_i2s_exit(void) } module_exit(s3c2412_i2s_exit); - /* Module information */ MODULE_AUTHOR("Ben Dooks, "); MODULE_DESCRIPTION("S3C2412 I2S SoC Interface"); diff --git a/sound/soc/s3c24xx/s3c2412-i2s.h b/sound/soc/s3c24xx/s3c2412-i2s.h index aac08a25e541..92848e54be16 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.h +++ b/sound/soc/s3c24xx/s3c2412-i2s.h @@ -15,9 +15,11 @@ #ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H #define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__ -#define S3C2412_DIV_BCLK (1) -#define S3C2412_DIV_RCLK (2) -#define S3C2412_DIV_PRESCALER (3) +#include "s3c-i2s-v2.h" + +#define S3C2412_DIV_BCLK S3C_I2SV2_DIV_BCLK +#define S3C2412_DIV_RCLK S3C_I2SV2_DIV_RCLK +#define S3C2412_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER #define S3C2412_CLKSRC_PCLK (0) #define S3C2412_CLKSRC_I2SCLK (1) @@ -26,13 +28,4 @@ extern struct clk *s3c2412_get_iisclk(void); extern struct snd_soc_dai s3c2412_i2s_dai; -struct s3c2412_rate_calc { - unsigned int clk_div; /* for prescaler */ - unsigned int fs_div; /* for root frame clock */ -}; - -extern int s3c2412_iis_calc_rate(struct s3c2412_rate_calc *info, - unsigned int *fstab, - unsigned int rate, struct clk *clk); - #endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */ -- cgit v1.2.3 From f8cf8176c7fc2c790e900595755b93e30633754d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 4 Mar 2009 00:49:31 +0000 Subject: ASoC: Add s3c64xx-i2s support Add the initial code to support the S3C64XX I2S hardware using the s3c-i2s-v2 core code. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 3 + sound/soc/s3c24xx/Kconfig | 6 +- sound/soc/s3c24xx/Makefile | 2 + sound/soc/s3c24xx/s3c64xx-i2s.c | 220 ++++++++++++++++++++++ sound/soc/s3c24xx/s3c64xx-i2s.h | 31 +++ 5 files changed, 261 insertions(+), 1 deletion(-) create mode 100644 sound/soc/s3c24xx/s3c64xx-i2s.c create mode 100644 sound/soc/s3c24xx/s3c64xx-i2s.h diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h index 25d4058bcfed..a5600b381d49 100644 --- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -33,6 +33,9 @@ #define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) #define S3C2412_IISCON_IIS_ACTIVE (1 << 0) +#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) +#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) + #define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) #define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) #define S3C2412_IISMOD_SLAVE (2 << 10) diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index bd98adaa5b0b..036a4965c950 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,6 +1,6 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3C24XX chips" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX help Say Y or M if you want to add support for codecs attached to the S3C24XX AC97, I2S or SSP interface. You will also need @@ -16,6 +16,10 @@ config SND_S3C2412_SOC_I2S tristate select SND_S3C_I2SV2_SOC +config SND_S3C64XX_SOC_I2S + tristate + select SND_S3C_I2SV2_SOC + config SND_S3C2443_SOC_AC97 tristate select AC97_BUS diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index 848981e18ac3..07a93a2ebe5f 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -2,6 +2,7 @@ snd-soc-s3c24xx-objs := s3c24xx-pcm.o snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o +snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o @@ -9,6 +10,7 @@ obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o +obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o # S3C24XX Machine Support diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c new file mode 100644 index 000000000000..6e1e85dc1ff2 --- /dev/null +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -0,0 +1,220 @@ +/* sound/soc/s3c24xx/s3c64xx-i2s.c + * + * ALSA SoC Audio Layer - S3C64XX I2S driver + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "s3c24xx-pcm.h" +#include "s3c64xx-i2s.h" + +static struct s3c2410_dma_client s3c64xx_dma_client_out = { + .name = "I2S PCM Stereo out" +}; + +static struct s3c2410_dma_client s3c64xx_dma_client_in = { + .name = "I2S PCM Stereo in" +}; + +static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_out[2] = { + [0] = { + .channel = DMACH_I2S0_OUT, + .client = &s3c64xx_dma_client_out, + .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISTXD, + .dma_size = 4, + }, + [1] = { + .channel = DMACH_I2S1_OUT, + .client = &s3c64xx_dma_client_out, + .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISTXD, + .dma_size = 4, + }, +}; + +static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_in[2] = { + [0] = { + .channel = DMACH_I2S0_IN, + .client = &s3c64xx_dma_client_in, + .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISRXD, + .dma_size = 4, + }, + [1] = { + .channel = DMACH_I2S1_IN, + .client = &s3c64xx_dma_client_in, + .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISRXD, + .dma_size = 4, + }, +}; + +static struct s3c_i2sv2_info s3c64xx_i2s[2]; + +static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) +{ + return cpu_dai->private_data; +} + +static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 iismod = readl(i2s->regs + S3C2412_IISMOD); + + switch (clk_id) { + case S3C64XX_CLKSRC_PCLK: + iismod &= ~S3C64XX_IISMOD_IMS_SYSMUX; + break; + + case S3C64XX_CLKSRC_MUX: + iismod |= S3C64XX_IISMOD_IMS_SYSMUX; + break; + + default: + return -EINVAL; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + + return 0; +} + + +unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + + return clk_get_rate(i2s->iis_cclk); +} +EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate); + +static int s3c64xx_i2s_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct device *dev = &pdev->dev; + struct s3c_i2sv2_info *i2s; + int ret; + + dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id); + + if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) { + dev_err(dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + i2s = &s3c64xx_i2s[pdev->id]; + + ret = s3c_i2sv2_probe(pdev, dai, i2s, + pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0); + if (ret) + return ret; + + i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id]; + i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id]; + + i2s->iis_cclk = clk_get(dev, "audio-bus"); + if (IS_ERR(i2s->iis_cclk)) { + dev_err(dev, "failed to get audio-bus"); + iounmap(i2s->regs); + return -ENODEV; + } + + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK); + s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI); + s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0); + break; + case 1: + s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK); + s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK); + s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI); + s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0); + } + + return 0; +} + + +#define S3C64XX_I2S_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define S3C64XX_I2S_FMTS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE) + +struct snd_soc_dai s3c64xx_i2s_dai = { + .name = "s3c64xx-i2s", + .id = 0, + .probe = s3c64xx_i2s_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C64XX_I2S_RATES, + .formats = S3C64XX_I2S_FMTS, + }, + .ops = { + .set_sysclk = s3c64xx_i2s_set_sysclk, + }, +}; +EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai); + +static int __init s3c64xx_i2s_init(void) +{ + return s3c_i2sv2_register_dai(&s3c64xx_i2s_dai); +} +module_init(s3c64xx_i2s_init); + +static void __exit s3c64xx_i2s_exit(void) +{ + snd_soc_unregister_dai(&s3c64xx_i2s_dai); +} +module_exit(s3c64xx_i2s_exit); + +/* Module information */ +MODULE_AUTHOR("Ben Dooks, "); +MODULE_DESCRIPTION("S3C64XX I2S SoC Interface"); +MODULE_LICENSE("GPL"); + + + diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h new file mode 100644 index 000000000000..b7ffe3c38b66 --- /dev/null +++ b/sound/soc/s3c24xx/s3c64xx-i2s.h @@ -0,0 +1,31 @@ +/* sound/soc/s3c24xx/s3c64xx-i2s.h + * + * ALSA SoC Audio Layer - S3C64XX I2S driver + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H +#define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__ + +#include "s3c-i2s-v2.h" + +#define S3C64XX_DIV_BCLK S3C_I2SV2_DIV_BCLK +#define S3C64XX_DIV_RCLK S3C_I2SV2_DIV_RCLK +#define S3C64XX_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER + +#define S3C64XX_CLKSRC_PCLK (0) +#define S3C64XX_CLKSRC_MUX (1) + +extern struct snd_soc_dai s3c64xx_i2s_dai; + +extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai); + +#endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */ -- cgit v1.2.3 From c36623a7543e7a23ceeafbeb7b34a9e020100898 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 4 Mar 2009 00:49:34 +0000 Subject: ASoC: Select DMA if I2S is configured Select the relevant DMA implementation when the sound driver is selected. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- sound/soc/s3c24xx/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 036a4965c950..f22dbeec48a6 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -8,6 +8,7 @@ config SND_S3C24XX_SOC config SND_S3C24XX_SOC_I2S tristate + select S3C2410_DMA config SND_S3C_I2SV2_SOC tristate @@ -15,13 +16,16 @@ config SND_S3C_I2SV2_SOC config SND_S3C2412_SOC_I2S tristate select SND_S3C_I2SV2_SOC + select S3C2410_DMA config SND_S3C64XX_SOC_I2S tristate select SND_S3C_I2SV2_SOC + select S3C64XX_DMA config SND_S3C2443_SOC_AC97 tristate + select S3C2410_DMA select AC97_BUS select SND_SOC_AC97_BUS -- cgit v1.2.3 From a1b3eaeb146937e954cdb6dcb67f8761b73e2eef Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 4 Mar 2009 20:17:48 +0000 Subject: ASoC: Refresh JIVE driver Remove uneeded startup callback and use snd_soc_dapm_nc_pin() Signed-off-by: Mark Brown --- sound/soc/s3c24xx/jive_wm8750.c | 27 ++++++--------------------- 1 file changed, 6 insertions(+), 21 deletions(-) diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c index 7dfe26ea8f40..32063790d95b 100644 --- a/sound/soc/s3c24xx/jive_wm8750.c +++ b/sound/soc/s3c24xx/jive_wm8750.c @@ -45,20 +45,6 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = { SND_SOC_DAPM_LINE("Line In", NULL), }; -static int jive_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; - - snd_soc_dapm_enable_pin(codec, "Headphone Jack"); - snd_soc_dapm_enable_pin(codec, "Internal Speaker"); - snd_soc_dapm_enable_pin(codec, "Line In"); - - snd_soc_dapm_sync(codec); - - return 0; -} - static int jive_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -119,7 +105,6 @@ static int jive_hw_params(struct snd_pcm_substream *substream, } static struct snd_soc_ops jive_ops = { - .startup = jive_startup, .hw_params = jive_hw_params, }; @@ -128,12 +113,12 @@ static int jive_wm8750_init(struct snd_soc_codec *codec) int err; /* These endpoints are not being used. */ - snd_soc_dapm_disable_pin(codec, "LINPUT2"); - snd_soc_dapm_disable_pin(codec, "RINPUT2"); - snd_soc_dapm_disable_pin(codec, "LINPUT3"); - snd_soc_dapm_disable_pin(codec, "RINPUT3"); - snd_soc_dapm_disable_pin(codec, "OUT3"); - snd_soc_dapm_disable_pin(codec, "MONO"); + snd_soc_dapm_nc_pin(codec, "LINPUT2"); + snd_soc_dapm_nc_pin(codec, "RINPUT2"); + snd_soc_dapm_nc_pin(codec, "LINPUT3"); + snd_soc_dapm_nc_pin(codec, "RINPUT3"); + snd_soc_dapm_nc_pin(codec, "OUT3"); + snd_soc_dapm_nc_pin(codec, "MONO"); /* Add jive specific widgets */ err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets, -- cgit v1.2.3 From 89492be88616aa20b3a6c3eb512f83c0c7d0c8a3 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 5 Mar 2009 12:48:49 +0200 Subject: ASoC: TWL4030: Make the HS ramp delay configurable Enum type for selecting the desired ramp delay for the headset output. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl4030.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 535d8ce2c328..86bb15cc82ce 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -584,12 +584,11 @@ static int headsetl_event(struct snd_soc_dapm_widget *w, /* Save the current volume */ hs_gain = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_GAIN_SET); + hs_pop = twl4030_read_reg_cache(w->codec, TWL4030_REG_HS_POPN_SET); switch (event) { case SND_SOC_DAPM_POST_PMU: /* Do the anti-pop/bias ramp enable according to the TRM */ - hs_pop = TWL4030_RAMP_DELAY_645MS; - twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); hs_pop |= TWL4030_VMID_EN; twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); /* Is this needed? Can we just use whatever gain here? */ @@ -603,8 +602,6 @@ static int headsetl_event(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMD: /* Do the anti-pop/bias ramp disable according to the TRM */ - hs_pop = twl4030_read_reg_cache(w->codec, - TWL4030_REG_HS_POPN_SET); hs_pop &= ~TWL4030_RAMP_EN; twl4030_write(w->codec, TWL4030_REG_HS_POPN_SET, hs_pop); /* Bypass the reg_cache to mute the headset */ @@ -847,6 +844,17 @@ static DECLARE_TLV_DB_SCALE(digital_capture_tlv, 0, 100, 0); */ static DECLARE_TLV_DB_SCALE(input_gain_tlv, 0, 600, 0); +static const char *twl4030_rampdelay_texts[] = { + "27/20/14 ms", "55/40/27 ms", "109/81/55 ms", "218/161/109 ms", + "437/323/218 ms", "874/645/437 ms", "1748/1291/874 ms", + "3495/2581/1748 ms" +}; + +static const struct soc_enum twl4030_rampdelay_enum = + SOC_ENUM_SINGLE(TWL4030_REG_HS_POPN_SET, 2, + ARRAY_SIZE(twl4030_rampdelay_texts), + twl4030_rampdelay_texts); + static const struct snd_kcontrol_new twl4030_snd_controls[] = { /* Common playback gain controls */ SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume", @@ -901,6 +909,8 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { SOC_DOUBLE_TLV("Analog Capture Volume", TWL4030_REG_ANAMIC_GAIN, 0, 3, 5, 0, input_gain_tlv), + + SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum), }; static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { -- cgit v1.2.3 From 20a41eac4fbaa22d051d0fbaeaf3315d2d8c4860 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 4 Mar 2009 21:16:57 +0100 Subject: ASoC: Fix name of register bit in pxa-ssp A bit in PXA's SSCR0 register was erroneously named ADC but its name is in fact ACS (audio clock select). Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- arch/arm/mach-pxa/include/mach/regs-ssp.h | 2 +- sound/soc/pxa/pxa-ssp.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h index 3c04cde2cf1f..cacdcae451e6 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -47,7 +47,7 @@ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index c49bb12b0a65..7fc13f03d1d2 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -300,7 +300,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, int val; u32 sscr0 = ssp_read_reg(ssp, SSCR0) & - ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ADC); + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); dev_dbg(&ssp->pdev->dev, "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n", @@ -328,7 +328,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, case PXA_SSP_CLK_AUDIO: priv->sysclk = 0; ssp_set_scr(&priv->dev, 1); - sscr0 |= SSCR0_ADC; + sscr0 |= SSCR0_ACS; break; default: return -ENODEV; @@ -524,7 +524,7 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, /* reset port settings */ sscr0 = ssp_read_reg(ssp, SSCR0) & - (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ADC); + (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); sspsp = 0; -- cgit v1.2.3 From 42aa3418ebd7b79be0e1ee7515e365c1574114f9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 1 Mar 2009 19:21:10 +0000 Subject: ASoC: Factor out DAPM widget power check into separate function Essentially simple code motion to facilitate refactoring of the power decisions. Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 258 +++++++++++++++++++++++++++------------------------ 1 file changed, 137 insertions(+), 121 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 4b8dbbfe2efb..7da6d0db40f2 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -522,6 +522,137 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w, } EXPORT_SYMBOL_GPL(dapm_reg_event); +/* + * Scan a single DAPM widget for a complete audio path and update the + * power status appropriately. + */ +static int dapm_power_widget(struct snd_soc_codec *codec, int event, + struct snd_soc_dapm_widget *w) +{ + int in, out, power_change, power, ret; + + /* vmid - no action */ + if (w->id == snd_soc_dapm_vmid) + return 0; + + /* active ADC */ + if (w->id == snd_soc_dapm_adc && w->active) { + in = is_connected_input_ep(w); + dapm_clear_walk(w->codec); + w->power = (in != 0) ? 1 : 0; + dapm_update_bits(w); + return 0; + } + + /* active DAC */ + if (w->id == snd_soc_dapm_dac && w->active) { + out = is_connected_output_ep(w); + dapm_clear_walk(w->codec); + w->power = (out != 0) ? 1 : 0; + dapm_update_bits(w); + return 0; + } + + /* pre and post event widgets */ + if (w->id == snd_soc_dapm_pre) { + if (!w->event) + return 0; + + if (event == SND_SOC_DAPM_STREAM_START) { + ret = w->event(w, + NULL, SND_SOC_DAPM_PRE_PMU); + if (ret < 0) + return ret; + } else if (event == SND_SOC_DAPM_STREAM_STOP) { + ret = w->event(w, + NULL, SND_SOC_DAPM_PRE_PMD); + if (ret < 0) + return ret; + } + return 0; + } + if (w->id == snd_soc_dapm_post) { + if (!w->event) + return 0; + + if (event == SND_SOC_DAPM_STREAM_START) { + ret = w->event(w, + NULL, SND_SOC_DAPM_POST_PMU); + if (ret < 0) + return ret; + } else if (event == SND_SOC_DAPM_STREAM_STOP) { + ret = w->event(w, + NULL, SND_SOC_DAPM_POST_PMD); + if (ret < 0) + return ret; + } + return 0; + } + + /* all other widgets */ + in = is_connected_input_ep(w); + dapm_clear_walk(w->codec); + out = is_connected_output_ep(w); + dapm_clear_walk(w->codec); + power = (out != 0 && in != 0) ? 1 : 0; + power_change = (w->power == power) ? 0 : 1; + w->power = power; + + if (!power_change) + return 0; + + /* call any power change event handlers */ + if (w->event) + pr_debug("power %s event for %s flags %x\n", + w->power ? "on" : "off", + w->name, w->event_flags); + + /* power up pre event */ + if (power && w->event && + (w->event_flags & SND_SOC_DAPM_PRE_PMU)) { + ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU); + if (ret < 0) + return ret; + } + + /* power down pre event */ + if (!power && w->event && + (w->event_flags & SND_SOC_DAPM_PRE_PMD)) { + ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD); + if (ret < 0) + return ret; + } + + /* Lower PGA volume to reduce pops */ + if (w->id == snd_soc_dapm_pga && !power) + dapm_set_pga(w, power); + + dapm_update_bits(w); + + /* Raise PGA volume to reduce pops */ + if (w->id == snd_soc_dapm_pga && power) + dapm_set_pga(w, power); + + /* power up post event */ + if (power && w->event && + (w->event_flags & SND_SOC_DAPM_POST_PMU)) { + ret = w->event(w, + NULL, SND_SOC_DAPM_POST_PMU); + if (ret < 0) + return ret; + } + + /* power down post event */ + if (!power && w->event && + (w->event_flags & SND_SOC_DAPM_POST_PMD)) { + ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD); + if (ret < 0) + return ret; + } + + return 0; +} + /* * Scan each dapm widget for complete audio path. * A complete path is a route that has valid endpoints i.e.:- @@ -534,7 +665,7 @@ EXPORT_SYMBOL_GPL(dapm_reg_event); static int dapm_power_widgets(struct snd_soc_codec *codec, int event) { struct snd_soc_dapm_widget *w; - int in, out, i, c = 1, *seq = NULL, ret = 0, power_change, power; + int i, c = 1, *seq = NULL, ret = 0; /* do we have a sequenced stream event */ if (event == SND_SOC_DAPM_STREAM_START) { @@ -545,135 +676,20 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) seq = dapm_down_seq; } - for(i = 0; i < c; i++) { + for (i = 0; i < c; i++) { list_for_each_entry(w, &codec->dapm_widgets, list) { /* is widget in stream order */ if (seq && seq[i] && w->id != seq[i]) continue; - /* vmid - no action */ - if (w->id == snd_soc_dapm_vmid) - continue; - - /* active ADC */ - if (w->id == snd_soc_dapm_adc && w->active) { - in = is_connected_input_ep(w); - dapm_clear_walk(w->codec); - w->power = (in != 0) ? 1 : 0; - dapm_update_bits(w); - continue; - } - - /* active DAC */ - if (w->id == snd_soc_dapm_dac && w->active) { - out = is_connected_output_ep(w); - dapm_clear_walk(w->codec); - w->power = (out != 0) ? 1 : 0; - dapm_update_bits(w); - continue; - } - - /* pre and post event widgets */ - if (w->id == snd_soc_dapm_pre) { - if (!w->event) - continue; - - if (event == SND_SOC_DAPM_STREAM_START) { - ret = w->event(w, - NULL, SND_SOC_DAPM_PRE_PMU); - if (ret < 0) - return ret; - } else if (event == SND_SOC_DAPM_STREAM_STOP) { - ret = w->event(w, - NULL, SND_SOC_DAPM_PRE_PMD); - if (ret < 0) - return ret; - } - continue; - } - if (w->id == snd_soc_dapm_post) { - if (!w->event) - continue; - - if (event == SND_SOC_DAPM_STREAM_START) { - ret = w->event(w, - NULL, SND_SOC_DAPM_POST_PMU); - if (ret < 0) - return ret; - } else if (event == SND_SOC_DAPM_STREAM_STOP) { - ret = w->event(w, - NULL, SND_SOC_DAPM_POST_PMD); - if (ret < 0) - return ret; - } - continue; - } - - /* all other widgets */ - in = is_connected_input_ep(w); - dapm_clear_walk(w->codec); - out = is_connected_output_ep(w); - dapm_clear_walk(w->codec); - power = (out != 0 && in != 0) ? 1 : 0; - power_change = (w->power == power) ? 0: 1; - w->power = power; - - if (!power_change) - continue; - - /* call any power change event handlers */ - if (w->event) - pr_debug("power %s event for %s flags %x\n", - w->power ? "on" : "off", - w->name, w->event_flags); - - /* power up pre event */ - if (power && w->event && - (w->event_flags & SND_SOC_DAPM_PRE_PMU)) { - ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU); - if (ret < 0) - return ret; - } - - /* power down pre event */ - if (!power && w->event && - (w->event_flags & SND_SOC_DAPM_PRE_PMD)) { - ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD); - if (ret < 0) - return ret; - } - - /* Lower PGA volume to reduce pops */ - if (w->id == snd_soc_dapm_pga && !power) - dapm_set_pga(w, power); - - dapm_update_bits(w); - - /* Raise PGA volume to reduce pops */ - if (w->id == snd_soc_dapm_pga && power) - dapm_set_pga(w, power); - - /* power up post event */ - if (power && w->event && - (w->event_flags & SND_SOC_DAPM_POST_PMU)) { - ret = w->event(w, - NULL, SND_SOC_DAPM_POST_PMU); - if (ret < 0) - return ret; - } - - /* power down post event */ - if (!power && w->event && - (w->event_flags & SND_SOC_DAPM_POST_PMD)) { - ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD); - if (ret < 0) - return ret; - } + ret = dapm_power_widget(codec, event, w); + if (ret != 0) + return ret; } } - return ret; + return 0; } #ifdef DEBUG -- cgit v1.2.3 From b0c5033f02182d1e9634edc737df88b82264e820 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 5 Mar 2009 14:21:26 +0100 Subject: ASoC: add two more bitfields for PXA SSP Add two more bitfields for the PSP register. As they seem to exist for PXA3xx only, define them conditionally. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- arch/arm/mach-pxa/include/mach/regs-ssp.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h index cacdcae451e6..f43905a27737 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -106,6 +106,11 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ +#if defined(CONFIG_PXA3xx) +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#endif + #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ #define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ #define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -- cgit v1.2.3 From 07495f3e5af3a472f0f49957692cac15168fa528 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 5 Mar 2009 17:06:23 +0000 Subject: ASoC: Fix memory allocation for snd_soc_dapm_switch names snd_soc_dapm_switch ends up ends up in dapm_new_mixer() (since a switch is a special case of a mixer with only one input) but this wasn't correctly handled in the code. Also fix the coding style for the switch below while we're here. Reported-by: Joonyoung Shim Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7da6d0db40f2..735903a74675 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -332,7 +332,7 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, * kcontrol name. */ name_len = strlen(w->kcontrols[i].name) + 1; - if (w->id == snd_soc_dapm_mixer) + if (w->id != snd_soc_dapm_mixer_named_ctl) name_len += 1 + strlen(w->name); path->long_name = kmalloc(name_len, GFP_KERNEL); @@ -341,15 +341,14 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, return -ENOMEM; switch (w->id) { - case snd_soc_dapm_mixer: default: snprintf(path->long_name, name_len, "%s %s", w->name, w->kcontrols[i].name); - break; + break; case snd_soc_dapm_mixer_named_ctl: snprintf(path->long_name, name_len, "%s", w->kcontrols[i].name); - break; + break; } path->long_name[name_len - 1] = '\0'; -- cgit v1.2.3 From 499d8f4a528f1ebd0c19d89174fdc67130090c89 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 5 Mar 2009 17:26:15 +0000 Subject: ASoC: Update Kconfig for Samsung CPUs to reflect S3C64xx support We now support the 64xx series as well as the 24xx series - make sure people using Kconfig know this. Signed-off-by: Mark Brown --- sound/soc/s3c24xx/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index f22dbeec48a6..78d01ff487cf 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,10 +1,10 @@ config SND_S3C24XX_SOC - tristate "SoC Audio for the Samsung S3C24XX chips" + tristate "SoC Audio for the Samsung S3CXXXX chips" depends on ARCH_S3C2410 || ARCH_S3C64XX help Say Y or M if you want to add support for codecs attached to - the S3C24XX AC97, I2S or SSP interface. You will also need - to select the audio interfaces to support below. + the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will + also need to select the audio interfaces to support below. config SND_S3C24XX_SOC_I2S tristate -- cgit v1.2.3 From a454dad19e78388d9f140ad0dfa6a849c57d385d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 5 Mar 2009 17:23:37 -0600 Subject: ASoC: add support for SSI asynchronous mode to the Freescale SSI drivers Add a new device tree property for the SSI node: "fsl,ssi-asynchronous". If defined, the SSI is programmed into asynchronous mode, otherwise it is programmed into synchronous mode. In asynchronous mode, pin SRCK must be connected to the same clock source as STFS, and pin SRFS must be connected to the same signal as STFS. Asynchronous mode allows playback and capture to use different sample sizes. It also technically allows different sample rates, but the driver does not support that. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 42 ++++++++++++++++++++++++++++++++---------- sound/soc/fsl/fsl_ssi.h | 2 ++ sound/soc/fsl/mpc8610_hpcd.c | 5 +++++ 3 files changed, 39 insertions(+), 10 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 6844009833db..8cb6bcf2c00f 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -72,6 +72,7 @@ * @dev: struct device pointer * @playback: the number of playback streams opened * @capture: the number of capture streams opened + * @asynchronous: 0=synchronous mode, 1=asynchronous mode * @cpu_dai: the CPU DAI for this device * @dev_attr: the sysfs device attribute structure * @stats: SSI statistics @@ -86,6 +87,7 @@ struct fsl_ssi_private { struct device *dev; unsigned int playback; unsigned int capture; + int asynchronous; struct snd_soc_dai cpu_dai; struct device_attribute dev_attr; @@ -301,9 +303,10 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * * FIXME: Little-endian samples require a different shift dir */ - clrsetbits_be32(&ssi->scr, CCSR_SSI_SCR_I2S_MODE_MASK, - CCSR_SSI_SCR_TFR_CLK_DIS | - CCSR_SSI_SCR_I2S_MODE_SLAVE | CCSR_SSI_SCR_SYN); + clrsetbits_be32(&ssi->scr, + CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, + CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE + | (ssi_private->asynchronous ? 0 : CCSR_SSI_SCR_SYN)); out_be32(&ssi->stcr, CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | @@ -382,10 +385,15 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, SNDRV_PCM_HW_PARAM_RATE, first_runtime->rate, first_runtime->rate); - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_SAMPLE_BITS, - first_runtime->sample_bits, - first_runtime->sample_bits); + /* If we're in synchronous mode, then we need to constrain + * the sample size as well. We don't support independent sample + * rates in asynchronous mode. + */ + if (!ssi_private->asynchronous) + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + first_runtime->sample_bits, + first_runtime->sample_bits); ssi_private->second_stream = substream; } @@ -421,13 +429,18 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, struct ccsr_ssi __iomem *ssi = ssi_private->ssi; unsigned int sample_size = snd_pcm_format_width(params_format(hw_params)); - u32 wl; + u32 wl = CCSR_SSI_SxCCR_WL(sample_size); /* The SSI should always be disabled at this points (SSIEN=0) */ - wl = CCSR_SSI_SxCCR_WL(sample_size); /* In synchronous mode, the SSI uses STCCR for capture */ - clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); + if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) || + !ssi_private->asynchronous) + clrsetbits_be32(&ssi->stccr, + CCSR_SSI_SxCCR_WL_MASK, wl); + else + clrsetbits_be32(&ssi->srccr, + CCSR_SSI_SxCCR_WL_MASK, wl); } return 0; @@ -653,6 +666,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info) ssi_private->ssi_phys = ssi_info->ssi_phys; ssi_private->irq = ssi_info->irq; ssi_private->dev = ssi_info->dev; + ssi_private->asynchronous = ssi_info->asynchronous; ssi_private->dev->driver_data = fsl_ssi_dai; @@ -703,6 +717,14 @@ void fsl_ssi_destroy_dai(struct snd_soc_dai *fsl_ssi_dai) } EXPORT_SYMBOL_GPL(fsl_ssi_destroy_dai); +static int __init fsl_ssi_init(void) +{ + printk(KERN_INFO "Freescale Synchronous Serial Interface (SSI) ASoC Driver\n"); + + return 0; +} +module_init(fsl_ssi_init); + MODULE_AUTHOR("Timur Tabi "); MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/fsl/fsl_ssi.h b/sound/soc/fsl/fsl_ssi.h index 83b44d700e33..eade01feaab6 100644 --- a/sound/soc/fsl/fsl_ssi.h +++ b/sound/soc/fsl/fsl_ssi.h @@ -208,6 +208,7 @@ struct ccsr_ssi { * ssi_phys: physical address of the SSI registers * irq: IRQ of this SSI * dev: struct device, used to create the sysfs statistics file + * asynchronous: 0=synchronous mode, 1=asynchronous mode */ struct fsl_ssi_info { unsigned int id; @@ -215,6 +216,7 @@ struct fsl_ssi_info { dma_addr_t ssi_phys; unsigned int irq; struct device *dev; + int asynchronous; }; struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info); diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index acf39a646b2f..ef67d1cdffe7 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -353,6 +353,11 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, } ssi_info.irq = machine_data->ssi_irq; + /* Do we want to use asynchronous mode? */ + ssi_info.asynchronous = + of_find_property(np, "fsl,ssi-asynchronous", NULL) ? 1 : 0; + if (ssi_info.asynchronous) + dev_info(&ofdev->dev, "using asynchronous mode\n"); /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); -- cgit v1.2.3 From de0b988828a45f4fefc96ff2fbed3ba2184319b9 Mon Sep 17 00:00:00 2001 From: "Lopez Cruz, Misael" Date: Thu, 5 Mar 2009 11:32:31 -0600 Subject: ASoC: Add headset jack detection for SDP3430 machine driver Add headset jack detection for SDP3430 boards using SoC jack reporting interface. Headset detection on SDP3430 board is achieved through TWL4030 GPIO_2 pin. Signed-off-by: Misael Lopez Cruz Signed-off-by: Mark Brown --- sound/soc/omap/sdp3430.c | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 4eab4b491dee..715c648203a4 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -122,7 +123,7 @@ static int sdp3430_twl4030_init(struct snd_soc_codec *codec) /* SDP3430 connected pins */ snd_soc_dapm_enable_pin(codec, "Ext Mic"); snd_soc_dapm_enable_pin(codec, "Ext Spk"); - snd_soc_dapm_enable_pin(codec, "Headset Jack"); + snd_soc_dapm_disable_pin(codec, "Headset Jack"); /* TWL4030 not connected pins */ snd_soc_dapm_nc_pin(codec, "AUXL"); @@ -144,6 +145,27 @@ static int sdp3430_twl4030_init(struct snd_soc_codec *codec) return ret; } +/* Headset jack */ +static struct snd_soc_jack hs_jack; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Headset Jack", + .mask = SND_JACK_HEADSET, + }, +}; + +/* Headset jack detection gpios */ +static struct snd_soc_jack_gpio hs_jack_gpios[] = { + { + .gpio = (OMAP_MAX_GPIO_LINES + 2), + .name = "hsdet-gpio", + .report = SND_JACK_HEADSET, + .debounce_time = 200, + }, +}; + /* Digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link sdp3430_dai = { .name = "TWL4030", @@ -194,7 +216,21 @@ static int __init sdp3430_soc_init(void) if (ret) goto err1; - return 0; + /* Headset jack detection */ + ret = snd_soc_jack_new(&snd_soc_sdp3430, "SDP3430 headset jack", + SND_JACK_HEADSET, &hs_jack); + if (ret) + return ret; + + ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + if (ret) + return ret; + + ret = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios), + hs_jack_gpios); + + return ret; err1: printk(KERN_ERR "Unable to add platform device\n"); @@ -206,6 +242,9 @@ module_init(sdp3430_soc_init); static void __exit sdp3430_soc_exit(void) { + snd_soc_jack_free_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios), + hs_jack_gpios); + platform_device_unregister(sdp3430_snd_device); } module_exit(sdp3430_soc_exit); -- cgit v1.2.3 From 3465d93a128acce836249e3de40932d2ed25cac6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Mar 2009 15:53:28 +0800 Subject: ASoC: Blackfin: move gpio_err behind the define that is only user of it Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Mark Brown --- sound/soc/blackfin/bf5xx-ac97.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c index 5885702c78ff..8a935f2d1767 100644 --- a/sound/soc/blackfin/bf5xx-ac97.c +++ b/sound/soc/blackfin/bf5xx-ac97.c @@ -357,8 +357,8 @@ sport_config_err: sport_err: #ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM); -#endif gpio_err: +#endif peripheral_free_list(sport_req[sport_num]); peripheral_err: free_page((unsigned long)cmd_count); -- cgit v1.2.3 From 67a9c573b5bf39bc6b40c322c58640687c1b79fe Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Mar 2009 15:53:30 +0800 Subject: ASoC: Blackfin: fix typo in MUTE definition Reported-by: Rob Maris Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Mark Brown --- sound/soc/codecs/ad73311.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/ad73311.h b/sound/soc/codecs/ad73311.h index 507ce0c30edf..569573d2d4d7 100644 --- a/sound/soc/codecs/ad73311.h +++ b/sound/soc/codecs/ad73311.h @@ -70,7 +70,7 @@ #define REGD_IGS(x) (x & 0x7) #define REGD_RMOD (1 << 3) #define REGD_OGS(x) ((x & 0x7) << 4) -#define REGD_MUTE (x << 7) +#define REGD_MUTE (1 << 7) /* Control register E */ #define CTRL_REG_E (4 << 8) -- cgit v1.2.3 From 26bd7b496cabc232fcff9ae0249828420c52b5af Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 6 Mar 2009 11:32:17 +0000 Subject: ASoC: Staticise workqueue function for GPIO jack detection Signed-off-by: Mark Brown --- sound/soc/soc-jack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index bdf2484c2220..28346fb2e70c 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -143,7 +143,7 @@ EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins); #ifdef CONFIG_GPIOLIB /* gpio detect */ -void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio) +static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio) { struct snd_soc_jack *jack = gpio->jack; int enable; -- cgit v1.2.3 From 9ca0791dcaa666e8e8f4b4ca028b65b4bde9cb28 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Thu, 5 Mar 2009 08:49:54 +0100 Subject: x86, bts: remove bad warning In case a ptraced task is reaped (while the tracer is still attached), ds_exit_thread() is called before ptrace_exit(). The latter will release the bts_tracer and remove the thread's ds_ctx. The former will WARN() if the context is not NULL. Oleg Nesterov submitted patches that move ptrace_exit() before exit_thread() and thus reverse the order of the above calls. Remove the bad warning. I will add it again when Oleg's changes are in. Signed-off-by: Markus Metzger LKML-Reference: <20090305084954.A22000@sedona.ch.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 169a120587be..de7cdbda1c36 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -1029,5 +1029,4 @@ void ds_copy_thread(struct task_struct *tsk, struct task_struct *father) void ds_exit_thread(struct task_struct *tsk) { - WARN_ON(tsk->thread.ds_ctx); } -- cgit v1.2.3 From 73bf1b62f561fc8ecb00e2810efe4fe769f4933e Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Thu, 5 Mar 2009 08:57:21 +0100 Subject: x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs() ds_write_config() can write the BTS as well as the PEBS part of the DS config. ds_request_pebs() passes the wrong qualifier, which results in the wrong configuration to be written. Reported-by: Stephane Eranian Signed-off-by: Markus Metzger LKML-Reference: <20090305085721.A22550@sedona.ch.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index de7cdbda1c36..87b67e3a765a 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -729,7 +729,7 @@ struct pebs_tracer *ds_request_pebs(struct task_struct *task, spin_unlock_irqrestore(&ds_lock, irq); - ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts); + ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs); ds_resume_pebs(tracer); return tracer; -- cgit v1.2.3 From 20214fcd74bddc16d65d466212f5dd32aafe8868 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Mon, 12 Jan 2009 16:22:57 +0200 Subject: MX1 fix include Includes missed irqs.h in devices.c and mx1ads.c. Signed-off-by: Darius Augulis Signed-off-by: Sascha Hauer --- arch/arm/mach-mx1/devices.c | 2 ++ arch/arm/mach-mx1/mx1ads.c | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 686d8d2dbb24..a95644193f3f 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -23,6 +23,8 @@ #include #include #include + +#include #include static struct resource imx_csi_resources[] = { diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 2e4b185fe4a9..3200cf60e384 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From ee7d476714464206317d4420d67e3bfa0308448d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 6 Mar 2009 18:04:34 +0000 Subject: ASoC: Re-remove hand-rolled pr_debug() macros The recent set of S3C64xx patches re-added a lot of uses of DBG() that had previously been removed - revert this so the standard pr_debug() macro is used. Signed-off-by: Mark Brown --- sound/soc/s3c24xx/neo1973_wm8753.c | 44 ++++++++++++++-------------------- sound/soc/s3c24xx/s3c-i2s-v2.c | 49 ++++++++++++++++---------------------- sound/soc/s3c24xx/s3c2412-i2s.c | 12 +++------- sound/soc/s3c24xx/s3c24xx-i2s.c | 49 ++++++++++++++++---------------------- sound/soc/s3c24xx/s3c24xx-pcm.c | 45 +++++++++++++++------------------- 5 files changed, 82 insertions(+), 117 deletions(-) diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 74573352718a..5f6aeec0437d 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -40,14 +40,6 @@ #include "s3c24xx-pcm.h" #include "s3c24xx-i2s.h" -/* Debugging stuff */ -#define S3C24XX_SOC_NEO1973_WM8753_DEBUG 0 -#if S3C24XX_SOC_NEO1973_WM8753_DEBUG -#define DBG(x...) printk(KERN_DEBUG "s3c24xx-soc-neo1973-wm8753: " x) -#else -#define DBG(x...) -#endif - /* define the scenarios */ #define NEO_AUDIO_OFF 0 #define NEO_GSM_CALL_AUDIO_HANDSET 1 @@ -72,7 +64,7 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream, int ret = 0; unsigned long iis_clkrate; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iis_clkrate = s3c24xx_i2s_get_clockrate(); @@ -158,7 +150,7 @@ static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); /* disable the PLL */ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0); @@ -181,7 +173,7 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream, int ret = 0; unsigned long iis_clkrate; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iis_clkrate = s3c24xx_i2s_get_clockrate(); @@ -224,7 +216,7 @@ static int neo1973_voice_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); /* disable the PLL */ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0); @@ -246,7 +238,7 @@ static int neo1973_get_scenario(struct snd_kcontrol *kcontrol, static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); switch (neo1973_scenario) { case NEO_AUDIO_OFF: @@ -330,7 +322,7 @@ static int neo1973_set_scenario(struct snd_kcontrol *kcontrol, { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (neo1973_scenario == ucontrol->value.integer.value[0]) return 0; @@ -344,7 +336,7 @@ static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0}; static void lm4857_write_regs(void) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (i2c_master_send(i2c, lm4857_regs, 4) != 4) printk(KERN_ERR "lm4857: i2c write failed\n"); @@ -357,7 +349,7 @@ static int lm4857_get_reg(struct snd_kcontrol *kcontrol, int shift = (kcontrol->private_value >> 8) & 0x0F; int mask = (kcontrol->private_value >> 16) & 0xFF; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask; return 0; @@ -385,7 +377,7 @@ static int lm4857_get_mode(struct snd_kcontrol *kcontrol, { u8 value = lm4857_regs[LM4857_CTRL] & 0x0F; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (value) value -= 5; @@ -399,7 +391,7 @@ static int lm4857_set_mode(struct snd_kcontrol *kcontrol, { u8 value = ucontrol->value.integer.value[0]; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (value) value += 5; @@ -508,7 +500,7 @@ static int neo1973_wm8753_init(struct snd_soc_codec *codec) { int i, err; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); /* set up NC codec pins */ snd_soc_dapm_nc_pin(codec, "LOUT2"); @@ -593,7 +585,7 @@ static struct snd_soc_device neo1973_snd_devdata = { static int lm4857_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); i2c = client; @@ -603,7 +595,7 @@ static int lm4857_i2c_probe(struct i2c_client *client, static int lm4857_i2c_remove(struct i2c_client *client) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); i2c = NULL; @@ -614,7 +606,7 @@ static u8 lm4857_state; static int lm4857_suspend(struct i2c_client *dev, pm_message_t state) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); dev_dbg(&dev->dev, "lm4857_suspend\n"); lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf; @@ -627,7 +619,7 @@ static int lm4857_suspend(struct i2c_client *dev, pm_message_t state) static int lm4857_resume(struct i2c_client *dev) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (lm4857_state) { lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f); @@ -638,7 +630,7 @@ static int lm4857_resume(struct i2c_client *dev) static void lm4857_shutdown(struct i2c_client *dev) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); dev_dbg(&dev->dev, "lm4857_shutdown\n"); lm4857_regs[LM4857_CTRL] &= 0xf0; @@ -669,7 +661,7 @@ static int __init neo1973_init(void) { int ret; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (!machine_is_neo1973_gta01()) { printk(KERN_INFO @@ -700,7 +692,7 @@ static int __init neo1973_init(void) static void __exit neo1973_exit(void) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); i2c_del_driver(&lm4857_i2c_driver); platform_device_unregister(neo1973_snd_device); diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 43262e1e8f98..b7b8e47ae361 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -38,13 +38,6 @@ #include "s3c-i2s-v2.h" #define S3C2412_I2S_DEBUG_CON 0 -#define S3C2412_I2S_DEBUG 0 - -#if S3C2412_I2S_DEBUG -#define DBG(x...) printk(KERN_INFO x) -#else -#define DBG(x...) do { } while (0) -#endif static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) { @@ -87,13 +80,13 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) void __iomem *regs = i2s->regs; u32 fic, con, mod; - DBG("%s(%d)\n", __func__, on); + pr_debug("%s(%d)\n", __func__, on); fic = readl(regs + S3C2412_IISFIC); con = readl(regs + S3C2412_IISCON); mod = readl(regs + S3C2412_IISMOD); - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); if (on) { con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; @@ -148,7 +141,7 @@ void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) fic = readl(regs + S3C2412_IISFIC); dbg_showcon(__func__, con); - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); } EXPORT_SYMBOL_GPL(s3c2412_snd_txctrl); @@ -157,13 +150,13 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) void __iomem *regs = i2s->regs; u32 fic, con, mod; - DBG("%s(%d)\n", __func__, on); + pr_debug("%s(%d)\n", __func__, on); fic = readl(regs + S3C2412_IISFIC); con = readl(regs + S3C2412_IISCON); mod = readl(regs + S3C2412_IISMOD); - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); if (on) { con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; @@ -214,7 +207,7 @@ void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) } fic = readl(regs + S3C2412_IISFIC); - DBG("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); } EXPORT_SYMBOL_GPL(s3c2412_snd_rxctrl); @@ -227,7 +220,7 @@ static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s) u32 iiscon; unsigned long timeout = jiffies + msecs_to_jiffies(5); - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); while (1) { iiscon = readl(i2s->regs + S3C2412_IISCON); @@ -252,10 +245,10 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, struct s3c_i2sv2_info *i2s = to_info(cpu_dai); u32 iismod; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iismod = readl(i2s->regs + S3C2412_IISMOD); - DBG("hw_params r: IISMOD: %x \n", iismod); + pr_debug("hw_params r: IISMOD: %x \n", iismod); #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) #define IISMOD_MASTER_MASK S3C2412_IISMOD_MASTER_MASK @@ -288,7 +281,7 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, iismod |= IISMOD_MASTER; break; default: - DBG("unknwon master/slave format\n"); + pr_debug("unknwon master/slave format\n"); return -EINVAL; } @@ -305,12 +298,12 @@ static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, iismod |= S3C2412_IISMOD_SDF_IIS; break; default: - DBG("Unknown data format\n"); + pr_debug("Unknown data format\n"); return -EINVAL; } writel(iismod, i2s->regs + S3C2412_IISMOD); - DBG("hw_params w: IISMOD: %x \n", iismod); + pr_debug("hw_params w: IISMOD: %x \n", iismod); return 0; } @@ -323,7 +316,7 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, struct s3c_i2sv2_info *i2s = to_info(dai->cpu_dai); u32 iismod; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) dai->cpu_dai->dma_data = i2s->dma_playback; @@ -332,7 +325,7 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, /* Working copies of register */ iismod = readl(i2s->regs + S3C2412_IISMOD); - DBG("%s: r: IISMOD: %x\n", __func__, iismod); + pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: @@ -344,7 +337,7 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, } writel(iismod, i2s->regs + S3C2412_IISMOD); - DBG("%s: w: IISMOD: %x\n", __func__, iismod); + pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); return 0; } @@ -357,7 +350,7 @@ static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd, unsigned long irqs; int ret = 0; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -417,7 +410,7 @@ static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, struct s3c_i2sv2_info *i2s = to_info(cpu_dai); u32 reg; - DBG("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div); + pr_debug("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div); switch (div_id) { case S3C_I2SV2_DIV_BCLK: @@ -425,7 +418,7 @@ static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, reg &= ~S3C2412_IISMOD_BCLK_MASK; writel(reg | div, i2s->regs + S3C2412_IISMOD); - DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); + pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); break; case S3C_I2SV2_DIV_RCLK: @@ -457,7 +450,7 @@ static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, reg = readl(i2s->regs + S3C2412_IISMOD); reg &= ~S3C2412_IISMOD_RCLK_MASK; writel(reg | div, i2s->regs + S3C2412_IISMOD); - DBG("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); + pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); break; case S3C_I2SV2_DIV_PRESCALER: @@ -467,7 +460,7 @@ static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, } else { writel(0x0, i2s->regs + S3C2412_IISPSR); } - DBG("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR)); + pr_debug("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR)); break; default: @@ -560,7 +553,7 @@ int s3c_i2sv2_probe(struct platform_device *pdev, i2s->iis_pclk = clk_get(dev, "iis"); if (i2s->iis_pclk == NULL) { - DBG("failed to get iis_clock\n"); + pr_debug("failed to get iis_clock\n"); iounmap(i2s->regs); return -ENOENT; } diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index 5099d9396676..1ceae690d019 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -42,12 +42,6 @@ #define S3C2412_I2S_DEBUG 0 -#if S3C2412_I2S_DEBUG -#define DBG(x...) printk(KERN_INFO x) -#else -#define DBG(x...) do { } while (0) -#endif - static struct s3c2410_dma_client s3c2412_dma_client_out = { .name = "I2S PCM Stereo out" }; @@ -80,7 +74,7 @@ static int s3c2412_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, { u32 iismod = readl(s3c2412_i2s.regs + S3C2412_IISMOD); - DBG("%s(%p, %d, %u, %d)\n", __func__, cpu_dai, clk_id, + pr_debug("%s(%p, %d, %u, %d)\n", __func__, cpu_dai, clk_id, freq, dir); switch (clk_id) { @@ -115,7 +109,7 @@ static int s3c2412_i2s_probe(struct platform_device *pdev, { int ret; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); ret = s3c_i2sv2_probe(pdev, dai, &s3c2412_i2s, S3C2410_PA_IIS); if (ret) @@ -126,7 +120,7 @@ static int s3c2412_i2s_probe(struct platform_device *pdev, s3c2412_i2s.iis_cclk = clk_get(&pdev->dev, "i2sclk"); if (s3c2412_i2s.iis_cclk == NULL) { - DBG("failed to get i2sclk clock\n"); + pr_debug("failed to get i2sclk clock\n"); iounmap(s3c2412_i2s.regs); return -ENODEV; } diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index c0c6ec1536b7..2fbead33b7c2 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -39,13 +39,6 @@ #include "s3c24xx-pcm.h" #include "s3c24xx-i2s.h" -#define S3C24XX_I2S_DEBUG 0 -#if S3C24XX_I2S_DEBUG -#define DBG(x...) printk(KERN_DEBUG "s3c24xx-i2s: " x) -#else -#define DBG(x...) -#endif - static struct s3c2410_dma_client s3c24xx_dma_client_out = { .name = "I2S PCM Stereo out" }; @@ -84,13 +77,13 @@ static void s3c24xx_snd_txctrl(int on) u32 iiscon; u32 iismod; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("r: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); + pr_debug("r: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); if (on) { iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE; @@ -120,7 +113,7 @@ static void s3c24xx_snd_txctrl(int on) writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); } - DBG("w: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); + pr_debug("w: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); } static void s3c24xx_snd_rxctrl(int on) @@ -129,13 +122,13 @@ static void s3c24xx_snd_rxctrl(int on) u32 iiscon; u32 iismod; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("r: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); + pr_debug("r: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); if (on) { iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE; @@ -165,7 +158,7 @@ static void s3c24xx_snd_rxctrl(int on) writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); } - DBG("w: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); + pr_debug("w: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon); } /* @@ -177,7 +170,7 @@ static int s3c24xx_snd_lrsync(void) u32 iiscon; int timeout = 50; /* 5ms */ - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); while (1) { iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); @@ -197,7 +190,7 @@ static int s3c24xx_snd_lrsync(void) */ static inline int s3c24xx_snd_is_clkmaster(void) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1; } @@ -210,10 +203,10 @@ static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, { u32 iismod; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("hw_params r: IISMOD: %lx \n", iismod); + pr_debug("hw_params r: IISMOD: %lx \n", iismod); switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: @@ -238,7 +231,7 @@ static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, } writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("hw_params w: IISMOD: %lx \n", iismod); + pr_debug("hw_params w: IISMOD: %lx \n", iismod); return 0; } @@ -249,7 +242,7 @@ static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; u32 iismod; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) rtd->dai->cpu_dai->dma_data = &s3c24xx_i2s_pcm_stereo_out; @@ -258,7 +251,7 @@ static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, /* Working copies of register */ iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("hw_params r: IISMOD: %lx\n", iismod); + pr_debug("hw_params r: IISMOD: %lx\n", iismod); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: @@ -276,7 +269,7 @@ static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, } writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("hw_params w: IISMOD: %lx\n", iismod); + pr_debug("hw_params w: IISMOD: %lx\n", iismod); return 0; } @@ -285,7 +278,7 @@ static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, { int ret = 0; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -327,7 +320,7 @@ static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, { u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); iismod &= ~S3C2440_IISMOD_MPLL; @@ -353,7 +346,7 @@ static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, { u32 reg; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); switch (div_id) { case S3C24XX_DIV_BCLK: @@ -389,7 +382,7 @@ EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate); static int s3c24xx_i2s_probe(struct platform_device *pdev, struct snd_soc_dai *dai) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100); if (s3c24xx_i2s.regs == NULL) @@ -397,7 +390,7 @@ static int s3c24xx_i2s_probe(struct platform_device *pdev, s3c24xx_i2s.iis_clk = clk_get(&pdev->dev, "iis"); if (s3c24xx_i2s.iis_clk == NULL) { - DBG("failed to get iis_clock\n"); + pr_debug("failed to get iis_clock\n"); iounmap(s3c24xx_i2s.regs); return -ENODEV; } @@ -421,7 +414,7 @@ static int s3c24xx_i2s_probe(struct platform_device *pdev, #ifdef CONFIG_PM static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); @@ -435,7 +428,7 @@ static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai) static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) { - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); clk_enable(s3c24xx_i2s.iis_clk); writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 5c96c1ed6299..269f5c8e7ca8 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -33,13 +33,6 @@ #include "s3c24xx-pcm.h" -#define S3C24XX_PCM_DEBUG 0 -#if S3C24XX_PCM_DEBUG -#define DBG(x...) printk(KERN_DEBUG "s3c24xx-pcm: " x) -#else -#define DBG(x...) -#endif - static const struct snd_pcm_hardware s3c24xx_pcm_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -84,16 +77,16 @@ static void s3c24xx_pcm_enqueue(struct snd_pcm_substream *substream) dma_addr_t pos = prtd->dma_pos; int ret; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); while (prtd->dma_loaded < prtd->dma_limit) { unsigned long len = prtd->dma_period; - DBG("dma_loaded: %d\n", prtd->dma_loaded); + pr_debug("dma_loaded: %d\n", prtd->dma_loaded); if ((pos + len) > prtd->dma_end) { len = prtd->dma_end - pos; - DBG(KERN_DEBUG "%s: corrected dma len %ld\n", + pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n", __func__, len); } @@ -119,7 +112,7 @@ static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel, struct snd_pcm_substream *substream = dev_id; struct s3c24xx_runtime_data *prtd; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR) return; @@ -148,7 +141,7 @@ static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream, unsigned long totbytes = params_buffer_bytes(params); int ret = 0; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); /* return if this is a bufferless transfer e.g. * codec <--> BT codec or GSM modem -- lg FIXME */ @@ -161,14 +154,14 @@ static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream, /* prepare DMA */ prtd->params = dma; - DBG("params %p, client %p, channel %d\n", prtd->params, + pr_debug("params %p, client %p, channel %d\n", prtd->params, prtd->params->client, prtd->params->channel); ret = s3c2410_dma_request(prtd->params->channel, prtd->params->client, NULL); if (ret < 0) { - DBG(KERN_ERR "failed to get dma channel\n"); + pr_debug(KERN_ERR "failed to get dma channel\n"); return ret; } } @@ -196,7 +189,7 @@ static int s3c24xx_pcm_hw_free(struct snd_pcm_substream *substream) { struct s3c24xx_runtime_data *prtd = substream->runtime->private_data; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); /* TODO - do we need to ensure DMA flushed */ snd_pcm_set_runtime_buffer(substream, NULL); @@ -214,7 +207,7 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream) struct s3c24xx_runtime_data *prtd = substream->runtime->private_data; int ret = 0; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); /* return if this is a bufferless transfer e.g. * codec <--> BT codec or GSM modem -- lg FIXME */ @@ -259,7 +252,7 @@ static int s3c24xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) struct s3c24xx_runtime_data *prtd = substream->runtime->private_data; int ret = 0; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); spin_lock(&prtd->lock); @@ -297,7 +290,7 @@ s3c24xx_pcm_pointer(struct snd_pcm_substream *substream) unsigned long res; dma_addr_t src, dst; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); spin_lock(&prtd->lock); s3c2410_dma_getposition(prtd->params->channel, &src, &dst); @@ -309,7 +302,7 @@ s3c24xx_pcm_pointer(struct snd_pcm_substream *substream) spin_unlock(&prtd->lock); - DBG("Pointer %x %x\n", src, dst); + pr_debug("Pointer %x %x\n", src, dst); /* we seem to be getting the odd error from the pcm library due * to out-of-bounds pointers. this is maybe due to the dma engine @@ -330,7 +323,7 @@ static int s3c24xx_pcm_open(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct s3c24xx_runtime_data *prtd; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); snd_soc_set_runtime_hwparams(substream, &s3c24xx_pcm_hardware); @@ -349,10 +342,10 @@ static int s3c24xx_pcm_close(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct s3c24xx_runtime_data *prtd = runtime->private_data; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (!prtd) - DBG("s3c24xx_pcm_close called with prtd == NULL\n"); + pr_debug("s3c24xx_pcm_close called with prtd == NULL\n"); kfree(prtd); @@ -364,7 +357,7 @@ static int s3c24xx_pcm_mmap(struct snd_pcm_substream *substream, { struct snd_pcm_runtime *runtime = substream->runtime; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); return dma_mmap_writecombine(substream->pcm->card->dev, vma, runtime->dma_area, @@ -390,7 +383,7 @@ static int s3c24xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) struct snd_dma_buffer *buf = &substream->dma_buffer; size_t size = s3c24xx_pcm_hardware.buffer_bytes_max; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); buf->dev.type = SNDRV_DMA_TYPE_DEV; buf->dev.dev = pcm->card->dev; @@ -409,7 +402,7 @@ static void s3c24xx_pcm_free_dma_buffers(struct snd_pcm *pcm) struct snd_dma_buffer *buf; int stream; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); for (stream = 0; stream < 2; stream++) { substream = pcm->streams[stream].substream; @@ -433,7 +426,7 @@ static int s3c24xx_pcm_new(struct snd_card *card, { int ret = 0; - DBG("Entered %s\n", __func__); + pr_debug("Entered %s\n", __func__); if (!card->dev->dma_mask) card->dev->dma_mask = &s3c24xx_pcm_dmamask; -- cgit v1.2.3 From b52a5195efd6173c06107ca5beb44389130596dc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 6 Mar 2009 18:13:43 +0000 Subject: ASoC: Fix logging severity for some S3C error messages Upgrade the severity of some failure messages from debug level so they're displayed by default. Signed-off-by: Mark Brown --- sound/soc/s3c24xx/s3c-i2s-v2.c | 2 +- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx-pcm.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index b7b8e47ae361..295a4c910262 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -553,7 +553,7 @@ int s3c_i2sv2_probe(struct platform_device *pdev, i2s->iis_pclk = clk_get(dev, "iis"); if (i2s->iis_pclk == NULL) { - pr_debug("failed to get iis_clock\n"); + dev_err(dev, "failed to get iis_clock\n"); iounmap(i2s->regs); return -ENOENT; } diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index 2fbead33b7c2..580cfed71cc9 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -390,7 +390,7 @@ static int s3c24xx_i2s_probe(struct platform_device *pdev, s3c24xx_i2s.iis_clk = clk_get(&pdev->dev, "iis"); if (s3c24xx_i2s.iis_clk == NULL) { - pr_debug("failed to get iis_clock\n"); + pr_err("failed to get iis_clock\n"); iounmap(s3c24xx_i2s.regs); return -ENODEV; } diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 269f5c8e7ca8..a9d68fa2b34a 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -161,7 +161,7 @@ static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream, prtd->params->client, NULL); if (ret < 0) { - pr_debug(KERN_ERR "failed to get dma channel\n"); + printk(KERN_ERR "failed to get dma channel\n"); return ret; } } -- cgit v1.2.3 From c63c58056e268b0d6bd6994b69030c144567990d Mon Sep 17 00:00:00 2001 From: Jeremy Higdon Date: Wed, 4 Mar 2009 12:09:46 -0800 Subject: [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs We recently discovered a problem with passing of DMA attributes on SN systems with the older PIC chips. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jeremy Higdon Cc: Cc: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pcibr/pcibr_dma.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index e626e50a938a..060df4aa9916 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -135,11 +135,10 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr, if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS) pci_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : - PHYS_TO_TIODMA(paddr) | dma_attributes; + PHYS_TO_TIODMA(paddr); else - pci_addr = IS_PIC_SOFT(pcibus_info) ? - paddr : - paddr | dma_attributes; + pci_addr = paddr; + pci_addr |= dma_attributes; /* Handle Bus mode */ if (IS_PCIX(pcibus_info)) -- cgit v1.2.3 From 1f6ff364ceda516f88351a8ab640e656beed0b26 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 27 Feb 2009 10:54:35 -0800 Subject: [SCSI] libfc: Pass lport in exch_mgr_reset fc_exch_mgr structure is private to fc_exch.c. To export exch_mgr_reset to transport, transport needs access to the exch manager. Change exch_mgr_reset to use lport param which is the shared structure between libFC and transport. Alternatively, fc_exch_mgr definition can be moved to libfc.h so that lport can be accessed from mp*. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 3 ++- drivers/scsi/libfc/fc_lport.c | 4 ++-- drivers/scsi/libfc/fc_rport.c | 4 ++-- include/scsi/libfc.h | 4 ++-- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 66db08a5f27f..a09416fd843c 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1480,10 +1480,11 @@ static void fc_exch_reset(struct fc_exch *ep) * If sid is non-zero, reset only exchanges we source from that FID. * If did is non-zero, reset only exchanges destined to that FID. */ -void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did) +void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) { struct fc_exch *ep; struct fc_exch *next; + struct fc_exch_mgr *mp = lp->emp; spin_lock_bh(&mp->em_lock); restart: diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 0b9bdb1fb807..5db223ce3b25 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -663,7 +663,7 @@ int fc_lport_destroy(struct fc_lport *lport) { lport->tt.frame_send = fc_frame_drop; lport->tt.fcp_abort_io(lport); - lport->tt.exch_mgr_reset(lport->emp, 0, 0); + lport->tt.exch_mgr_reset(lport, 0, 0); return 0; } EXPORT_SYMBOL(fc_lport_destroy); @@ -973,7 +973,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) lport->tt.disc_stop(lport); - lport->tt.exch_mgr_reset(lport->emp, 0, 0); + lport->tt.exch_mgr_reset(lport, 0, 0); fc_host_fabric_name(lport->host) = 0; fc_host_port_id(lport->host) = 0; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index e780d8caf70e..dec7bae0e56d 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1285,7 +1285,7 @@ void fc_rport_terminate_io(struct fc_rport *rport) struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id); - lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0); + lport->tt.exch_mgr_reset(lport, 0, rport->port_id); + lport->tt.exch_mgr_reset(lport, rport->port_id, 0); } EXPORT_SYMBOL(fc_rport_terminate_io); diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 9f2876397dda..042f4ade73d7 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -472,7 +472,7 @@ struct libfc_function_template { * If s_id is non-zero, reset only exchanges originating from that FID. * If d_id is non-zero, reset only exchanges sending to that FID. */ - void (*exch_mgr_reset)(struct fc_exch_mgr *, + void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id); void (*rport_flush_queue)(void); @@ -916,7 +916,7 @@ struct fc_seq *fc_seq_start_next(struct fc_seq *sp); * If s_id is non-zero, reset only exchanges originating from that FID. * If d_id is non-zero, reset only exchanges sending to that FID. */ -void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id); +void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id); /* * Functions for fc_functions_template -- cgit v1.2.3 From 571f824c3cd7b7f5a40ba100f7e576b6b0fe826a Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 27 Feb 2009 10:54:41 -0800 Subject: [SCSI] libfc: when rport goes away (re-plogi), clean up exchanges to/from rport When a rport goes away, libFC does a plogi which will reset exchanges at the rport. Clean exchanges at our end, both in transport and libFC. If transport hooks into exch_mgr_reset, it will call back into fc_exch_mgr_reset() to clean up libFC exchanges. Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_rport.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index dec7bae0e56d..717575934152 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -214,6 +214,7 @@ static void fc_rport_state_enter(struct fc_rport *rport, static void fc_rport_work(struct work_struct *work) { + u32 port_id; struct fc_rport_libfc_priv *rdata = container_of(work, struct fc_rport_libfc_priv, event_work); enum fc_rport_event event; @@ -279,8 +280,12 @@ static void fc_rport_work(struct work_struct *work) rport_ops->event_callback(lport, rport, event); if (trans_state == FC_PORTSTATE_ROGUE) put_device(&rport->dev); - else + else { + port_id = rport->port_id; fc_remote_port_delete(rport); + lport->tt.exch_mgr_reset(lport, 0, port_id); + lport->tt.exch_mgr_reset(lport, port_id, 0); + } } else mutex_unlock(&rdata->rp_mutex); } -- cgit v1.2.3 From 78342da3682ec843e3e6301af5c723c88a46c408 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:46 -0800 Subject: [SCSI] libfc: handle RRQ exch timeout Cleanup exchange held due to RRQ when RRQ exch times out, in this case the ABTS is already done causing RRQ req therefore proceeding with cleanup in fc_exch_rrq_resp should be okay to restore exch resource. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index a09416fd843c..e874e77b740c 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1608,7 +1608,7 @@ static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) if (IS_ERR(fp)) { int err = PTR_ERR(fp); - if (err == -FC_EX_CLOSED) + if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT) goto cleanup; FC_DBG("Cannot process RRQ, because of frame error %d\n", err); return; -- cgit v1.2.3 From a7e84f2b83f17f8f11da34ccef3ba5a862dc0182 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:51 -0800 Subject: [SCSI] libfc: fixed a soft lockup issue in fc_exch_recv_abts The fc_seq_start_next grabs ep->ex_lock but this lock was already held here, so instead called fc_seq_start_next_locked to avoid soft lockup. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index e874e77b740c..dd269e5f953e 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1096,7 +1096,7 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) ap->ba_high_seq_cnt = fh->fh_seq_cnt; ap->ba_low_seq_cnt = htons(sp->cnt); } - sp = fc_seq_start_next(sp); + sp = fc_seq_start_next_locked(sp); spin_unlock_bh(&ep->ex_lock); fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); fc_frame_free(rx_fp); -- cgit v1.2.3 From bc0e17f691085315ae9303eb5b0883fe16dfe6b1 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:54:57 -0800 Subject: [SCSI] libfc, fcoe: fixed locking issues with lport->lp_mutex around lport->link_status The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_sw.c | 6 +++--- drivers/scsi/fcoe/libfcoe.c | 41 +++++++++++++++++------------------------ drivers/scsi/libfc/fc_fcp.c | 4 ++-- drivers/scsi/libfc/fc_lport.c | 36 ++++++------------------------------ include/scsi/libfc.h | 12 ++---------- 5 files changed, 30 insertions(+), 69 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index dc4cd5e25760..cf83675a0fb9 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -116,7 +116,8 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) { int i = 0; - lp->link_status = 0; + lp->link_up = 0; + lp->qfull = 0; lp->max_retry_count = 3; lp->e_d_tov = 2 * 1000; /* FC-FS default */ lp->r_a_tov = 2 * 2 * 1000; @@ -181,9 +182,8 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) if (fc_set_mfs(lp, mfs)) return -EINVAL; - lp->link_status = ~FC_PAUSE & ~FC_LINK_UP; if (!fcoe_link_ok(lp)) - lp->link_status |= FC_LINK_UP; + lp->link_up = 1; /* offload features support */ if (fc->real_dev->features & NETIF_F_SG) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index e419f486cdb3..296071043f55 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -504,7 +504,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) if (rc) { fcoe_insert_wait_queue(lp, skb); if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - fc_pause(lp); + lp->qfull = 1; } return 0; @@ -718,7 +718,7 @@ static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa) * fcoe_watchdog - fcoe timer callback * @vp: * - * This checks the pending queue length for fcoe and put fcoe to be paused state + * This checks the pending queue length for fcoe and set lport qfull * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the * fcoe_hostlist. * @@ -728,17 +728,17 @@ void fcoe_watchdog(ulong vp) { struct fc_lport *lp; struct fcoe_softc *fc; - int paused = 0; + int qfilled = 0; read_lock(&fcoe_hostlist_lock); list_for_each_entry(fc, &fcoe_hostlist, list) { lp = fc->lp; if (lp) { if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - paused = 1; + qfilled = 1; if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) { - if (paused) - fc_unpause(lp); + if (qfilled) + lp->qfull = 0; } } } @@ -767,8 +767,7 @@ void fcoe_watchdog(ulong vp) **/ static int fcoe_check_wait_queue(struct fc_lport *lp) { - int rc, unpause = 0; - int paused = 0; + int rc; struct sk_buff *skb; struct fcoe_softc *fc; @@ -776,10 +775,10 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) spin_lock_bh(&fc->fcoe_pending_queue.lock); /* - * is this interface paused? + * if interface pending queue full then set qfull in lport. */ if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH) - paused = 1; + lp->qfull = 1; if (fc->fcoe_pending_queue.qlen) { while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) { spin_unlock_bh(&fc->fcoe_pending_queue.lock); @@ -791,11 +790,9 @@ static int fcoe_check_wait_queue(struct fc_lport *lp) spin_lock_bh(&fc->fcoe_pending_queue.lock); } if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH) - unpause = 1; + lp->qfull = 0; } spin_unlock_bh(&fc->fcoe_pending_queue.lock); - if ((unpause) && (paused)) - fc_unpause(lp); return fc->fcoe_pending_queue.qlen; } @@ -873,7 +870,7 @@ static int fcoe_device_notification(struct notifier_block *notifier, struct net_device *real_dev = ptr; struct fcoe_softc *fc; struct fcoe_dev_stats *stats; - u16 new_status; + u32 new_link_up; u32 mfs; int rc = NOTIFY_OK; @@ -890,17 +887,15 @@ static int fcoe_device_notification(struct notifier_block *notifier, goto out; } - new_status = lp->link_status; + new_link_up = lp->link_up; switch (event) { case NETDEV_DOWN: case NETDEV_GOING_DOWN: - new_status &= ~FC_LINK_UP; + new_link_up = 0; break; case NETDEV_UP: case NETDEV_CHANGE: - new_status &= ~FC_LINK_UP; - if (!fcoe_link_ok(lp)) - new_status |= FC_LINK_UP; + new_link_up = !fcoe_link_ok(lp); break; case NETDEV_CHANGEMTU: mfs = fc->real_dev->mtu - @@ -908,17 +903,15 @@ static int fcoe_device_notification(struct notifier_block *notifier, sizeof(struct fcoe_crc_eof)); if (mfs >= FC_MIN_MAX_FRAME) fc_set_mfs(lp, mfs); - new_status &= ~FC_LINK_UP; - if (!fcoe_link_ok(lp)) - new_status |= FC_LINK_UP; + new_link_up = !fcoe_link_ok(lp); break; case NETDEV_REGISTER: break; default: FC_DBG("unknown event %ld call", event); } - if (lp->link_status != new_status) { - if ((new_status & FC_LINK_UP) == FC_LINK_UP) + if (lp->link_up != new_link_up) { + if (new_link_up) fc_linkup(lp); else { stats = lp->dev_stats[smp_processor_id()]; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 404e63ff46b8..f440aaca39c2 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1621,7 +1621,7 @@ out: static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp) { /* lock ? */ - return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP); + return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull; } /** @@ -1890,7 +1890,7 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd) lp = shost_priv(sc_cmd->device->host); if (lp->state != LPORT_ST_READY) return rc; - else if (!(lp->link_status & FC_LINK_UP)) + else if (!lp->link_up) return rc; spin_lock_irqsave(lp->host->host_lock, flags); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 5db223ce3b25..a6ab692f5f51 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -250,7 +250,7 @@ void fc_get_host_port_state(struct Scsi_Host *shost) { struct fc_lport *lp = shost_priv(shost); - if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP) + if (lp->link_up) fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; else fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; @@ -577,8 +577,8 @@ void fc_linkup(struct fc_lport *lport) fc_host_port_id(lport->host)); mutex_lock(&lport->lp_mutex); - if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) { - lport->link_status |= FC_LINK_UP; + if (!lport->link_up) { + lport->link_up = 1; if (lport->state == LPORT_ST_RESET) fc_lport_enter_flogi(lport); @@ -597,8 +597,8 @@ void fc_linkdown(struct fc_lport *lport) FC_DEBUG_LPORT("Link is down for port (%6x)\n", fc_host_port_id(lport->host)); - if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) { - lport->link_status &= ~(FC_LINK_UP); + if (lport->link_up) { + lport->link_up = 0; fc_lport_enter_reset(lport); lport->tt.fcp_cleanup(lport); } @@ -606,30 +606,6 @@ void fc_linkdown(struct fc_lport *lport) } EXPORT_SYMBOL(fc_linkdown); -/** - * fc_pause - Pause the flow of frames - * @lport: The lport to be paused - */ -void fc_pause(struct fc_lport *lport) -{ - mutex_lock(&lport->lp_mutex); - lport->link_status |= FC_PAUSE; - mutex_unlock(&lport->lp_mutex); -} -EXPORT_SYMBOL(fc_pause); - -/** - * fc_unpause - Unpause the flow of frames - * @lport: The lport to be unpaused - */ -void fc_unpause(struct fc_lport *lport) -{ - mutex_lock(&lport->lp_mutex); - lport->link_status &= ~(FC_PAUSE); - mutex_unlock(&lport->lp_mutex); -} -EXPORT_SYMBOL(fc_unpause); - /** * fc_fabric_logoff - Logout of the fabric * @lport: fc_lport pointer to logoff the fabric @@ -977,7 +953,7 @@ static void fc_lport_enter_reset(struct fc_lport *lport) fc_host_fabric_name(lport->host) = 0; fc_host_port_id(lport->host) = 0; - if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) + if (lport->link_up) fc_lport_enter_flogi(lport); } diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 042f4ade73d7..b9e6c1cd8914 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -68,9 +68,6 @@ /* * FC HBA status */ -#define FC_PAUSE (1 << 1) -#define FC_LINK_UP (1 << 0) - enum fc_lport_state { LPORT_ST_NONE = 0, LPORT_ST_FLOGI, @@ -603,7 +600,8 @@ struct fc_lport { /* Operational Information */ struct libfc_function_template tt; - u16 link_status; + u8 link_up; + u8 qfull; enum fc_lport_state state; unsigned long boot_time; @@ -703,12 +701,6 @@ void fc_linkup(struct fc_lport *); */ void fc_linkdown(struct fc_lport *); -/* - * Pause and unpause traffic. - */ -void fc_pause(struct fc_lport *); -void fc_unpause(struct fc_lport *); - /* * Configure the local port. */ -- cgit v1.2.3 From 6755db1cd4587084be85f860b7aa7c0cc9d776dc Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 27 Feb 2009 10:55:02 -0800 Subject: [SCSI] libfc: rport retry on LS_RJT from certain ELS This allows any rport ELS to retry on LS_RJT. The rport error handling would only retry on resource allocation failures and exchange timeouts. I have a target that will occasionally reject PLOGI when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would fail silently leaving the rport in a dead state. The retry count and delay are managed by fc_rport_error_retry. If the retry count is exceeded fc_rport_error will be called. When retrying is not the correct course of action, fc_rport_error can be called directly. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 - drivers/scsi/libfc/fc_rport.c | 111 ++++++++++++++++++++++++------------------ include/scsi/fc/fc_fs.h | 5 ++ 3 files changed, 69 insertions(+), 49 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index dd269e5f953e..8c4018956d4c 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -32,8 +32,6 @@ #include #include -#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */ - /* * fc_exch_debug can be set in debugger or at compile time to get more logs. */ diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 717575934152..600a8fffa940 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -81,6 +81,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *, struct fc_seq *, struct fc_frame *); static void fc_rport_timeout(struct work_struct *); static void fc_rport_error(struct fc_rport *, struct fc_frame *); +static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *); static void fc_rport_work(struct work_struct *); static const char *fc_rport_state_names[] = { @@ -410,57 +411,73 @@ static void fc_rport_timeout(struct work_struct *work) } /** - * fc_rport_error - Handler for any errors + * fc_rport_error - Error handler, called once retries have been exhausted * @rport: The fc_rport object * @fp: The frame pointer * - * If the error was caused by a resource allocation failure - * then wait for half a second and retry, otherwise retry - * immediately. - * * Locking Note: The rport lock is expected to be held before * calling this routine */ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) { struct fc_rport_libfc_priv *rdata = rport->dd_data; - unsigned long delay = 0; FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n", PTR_ERR(fp), fc_rport_state(rport), rdata->retries); - if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { - /* - * Memory allocation failure, or the exchange timed out. - * Retry after delay - */ - if (rdata->retries < rdata->local_port->max_retry_count) { - rdata->retries++; - if (!fp) - delay = msecs_to_jiffies(500); - get_device(&rport->dev); - schedule_delayed_work(&rdata->retry_work, delay); - } else { - switch (rdata->rp_state) { - case RPORT_ST_PLOGI: - case RPORT_ST_PRLI: - case RPORT_ST_LOGO: - rdata->event = RPORT_EV_FAILED; - queue_work(rport_event_queue, - &rdata->event_work); - break; - case RPORT_ST_RTV: - fc_rport_enter_ready(rport); - break; - case RPORT_ST_NONE: - case RPORT_ST_READY: - case RPORT_ST_INIT: - break; - } - } + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + case RPORT_ST_PRLI: + case RPORT_ST_LOGO: + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, + &rdata->event_work); + break; + case RPORT_ST_RTV: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_NONE: + case RPORT_ST_READY: + case RPORT_ST_INIT: + break; } } +/** + * fc_rport_error_retry - Error handler when retries are desired + * @rport: The fc_rport object + * @fp: The frame pointer + * + * If the error was an exchange timeout retry immediately, + * otherwise wait for E_D_TOV. + * + * Locking Note: The rport lock is expected to be held before + * calling this routine + */ +static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + unsigned long delay = FC_DEF_E_D_TOV; + + /* make sure this isn't an FC_EX_CLOSED error, never retry those */ + if (PTR_ERR(fp) == -FC_EX_CLOSED) + return fc_rport_error(rport, fp); + + if (rdata->retries < rdata->local_port->max_retry_count) { + FC_DEBUG_RPORT("Error %ld in state %s, retrying\n", + PTR_ERR(fp), fc_rport_state(rport)); + rdata->retries++; + /* no additional delay on exchange timeouts */ + if (PTR_ERR(fp) == -FC_EX_TIMEOUT) + delay = 0; + get_device(&rport->dev); + schedule_delayed_work(&rdata->retry_work, delay); + return; + } + + return fc_rport_error(rport, fp); +} + /** * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response * @sp: current sequence in the PLOGI exchange @@ -495,7 +512,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, } if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -527,7 +544,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, else fc_rport_enter_prli(rport); } else - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); out: fc_frame_free(fp); @@ -557,14 +574,14 @@ static void fc_rport_enter_plogi(struct fc_rport *rport) rport->maxframe_size = FC_MIN_MAX_PAYLOAD; fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } rdata->e_d_tov = lport->e_d_tov; if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI, fc_rport_plogi_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -604,7 +621,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, } if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -662,7 +679,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, rport->port_id); if (IS_ERR(fp)) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); goto err; } @@ -712,13 +729,13 @@ static void fc_rport_enter_prli(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(*pp)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI, fc_rport_prli_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -809,13 +826,13 @@ static void fc_rport_enter_rtv(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV, fc_rport_rtv_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } @@ -840,13 +857,13 @@ static void fc_rport_enter_logo(struct fc_rport *rport) fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); if (!fp) { - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); return; } if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO, fc_rport_logo_resp, rport, lport->e_d_tov)) - fc_rport_error(rport, fp); + fc_rport_error_retry(rport, fp); else get_device(&rport->dev); } diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h index 3e4801d2bdbb..1b7af3a64c7c 100644 --- a/include/scsi/fc/fc_fs.h +++ b/include/scsi/fc/fc_fs.h @@ -337,4 +337,9 @@ enum fc_pf_rjt_reason { FC_RJT_VENDOR = 0xff, /* vendor specific reject */ }; +/* default timeout values */ + +#define FC_DEF_E_D_TOV 2000UL +#define FC_DEF_R_A_TOV 10000UL + #endif /* _FC_FS_H_ */ -- cgit v1.2.3 From 26d9cab558f901051d0b69b2c445c8588931ce8d Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 27 Feb 2009 10:55:07 -0800 Subject: [SCSI] libfc: fixed a read IO data integrity issue when a IO data frame lost The fc_fcp_complete_locked detected data underrun in this case and set the FC_DATA_UNDRUN but that was ignored by fc_io_compl for all cases including read underrun. Added code to not to ignore FC_DATA_UNDRUN for read IO and instead suggested scsi-ml to retry cmd to recover from lost data frame. Not sure if it is okay to ignore FC_DATA_UNDRUN for other case, so let code as is for other cases but removed or-ing with zero valued fsp->cdb_status for those cases. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f440aaca39c2..ecc72612c385 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1810,12 +1810,12 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd->result = DID_ERROR << 16; break; case FC_DATA_UNDRUN: - if (fsp->cdb_status == 0) { + if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) { /* * scsi status is good but transport level - * underrun. for read it should be an error?? + * underrun. */ - sc_cmd->result = (DID_OK << 16) | fsp->cdb_status; + sc_cmd->result = DID_OK << 16; } else { /* * scsi got underrun, this is an error -- cgit v1.2.3 From f7db2c150cf5082cf74555f30a1305938041de80 Mon Sep 17 00:00:00 2001 From: Steve Ma Date: Fri, 27 Feb 2009 10:55:13 -0800 Subject: [SCSI] libfc: exch mgr is freed while lport still retrying sequences When a sequence cannot be delivered to the target, the local port will schedule retries, While this process is in progress, if we destroy the FCoE interface, the fcoe_sw_destroy routine is entered, and the fc_exch_mgr_free(lp->emp) is called. Thus if fc_exch_alloc() is called when retrying the sequence, the mempool_alloc() will fail to allocate the exchange because the mempool of the exchange manager has already been released. This patch is to cancel any pending retry work of the local port before we start to destroy the interface. Also, when resetting the local port, we should also stop the scheduled pending retries. Signed-off-by: Steve Ma Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index a6ab692f5f51..e6ea4f119530 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -619,6 +619,7 @@ int fc_fabric_logoff(struct fc_lport *lport) mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); + cancel_delayed_work_sync(&lport->retry_work); return 0; } EXPORT_SYMBOL(fc_fabric_logoff); @@ -918,6 +919,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_seq *sp, */ int fc_lport_reset(struct fc_lport *lport) { + cancel_delayed_work_sync(&lport->retry_work); mutex_lock(&lport->lp_mutex); fc_lport_enter_reset(lport); mutex_unlock(&lport->lp_mutex); -- cgit v1.2.3 From 5101ff99f59aefb72e0c96e82aa32048ac9f8425 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:18 -0800 Subject: [SCSI] libfc: Don't violate transport template for rogue port creation Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 6 +++--- drivers/scsi/libfc/fc_lport.c | 4 ++-- drivers/scsi/libfc/fc_rport.c | 3 +++ include/scsi/libfc.h | 5 +++++ 4 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index dd1564c9e04a..15e3f840c049 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -430,7 +430,7 @@ static int fc_disc_new_target(struct fc_disc *disc, dp.ids.port_name = ids->port_name; dp.ids.node_name = ids->node_name; dp.ids.roles = ids->roles; - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); } if (!rport) error = -ENOMEM; @@ -617,7 +617,7 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) if ((dp.ids.port_id != fc_host_port_id(lport->host)) && (dp.ids.port_name != lport->wwpn)) { - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); if (rport) { rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; @@ -769,7 +769,7 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) if (rport) fc_disc_del_target(disc, rport); - new_rport = fc_rport_rogue_create(dp); + new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e6ea4f119530..07335ae2947c 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -232,7 +232,7 @@ static void fc_lport_ptp_setup(struct fc_lport *lport, lport->ptp_rp = NULL; } - lport->ptp_rp = fc_rport_rogue_create(&dp); + lport->ptp_rp = lport->tt.rport_create(&dp); lport->tt.rport_login(lport->ptp_rp); @@ -1282,7 +1282,7 @@ static void fc_lport_enter_dns(struct fc_lport *lport) fc_lport_state_enter(lport, LPORT_ST_DNS); - rport = fc_rport_rogue_create(&dp); + rport = lport->tt.rport_create(&dp); if (!rport) goto err; diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 600a8fffa940..81b3ca188789 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1271,6 +1271,9 @@ static void fc_rport_flush_queue(void) int fc_rport_init(struct fc_lport *lport) { + if (!lport->tt.rport_create) + lport->tt.rport_create = fc_rport_rogue_create; + if (!lport->tt.rport_login) lport->tt.rport_login = fc_rport_login; diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index b9e6c1cd8914..37df48e13b97 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -489,6 +489,11 @@ struct libfc_function_template { * Remote Port interfaces */ + /* + * Create a remote port + */ + struct fc_rport *(*rport_create)(struct fc_disc_port *); + /* * Initiates the RP state machine. It is called from the LP module. * This function will issue the following commands to the N_Port -- cgit v1.2.3 From 23f11f9076fcd6ee20c56e413b11f1b5658e3f82 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:23 -0800 Subject: [SCSI] libfc: correct RPORT_TO_PRIV usage We only need to use this macro when assigning a value to rport->dd_data. All other accesses should just use dd_data. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 15e3f840c049..9f4e408bc7fc 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -246,7 +246,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp, list_del(&dp->peers); rport = lport->tt.rport_lookup(lport, dp->ids.port_id); if (rport) { - rdata = RPORT_TO_PRIV(rport); + rdata = rport->dd_data; list_del(&rdata->peers); lport->tt.rport_logoff(rport); } @@ -453,7 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc, static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) { struct fc_lport *lport = disc->lport; - struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport); + struct fc_rport_libfc_priv *rdata = rport->dd_data; list_del(&rdata->peers); lport->tt.rport_logoff(rport); } -- cgit v1.2.3 From d3b33327cab0c8e9cae2c12d908ca79433c0d1ac Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:29 -0800 Subject: [SCSI] libfc: rename rp to rdata in fc_disc_new_target() Just rename the variable as per our naming convention. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 9f4e408bc7fc..cfbce893941a 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -396,7 +396,7 @@ static int fc_disc_new_target(struct fc_disc *disc, struct fc_rport_identifiers *ids) { struct fc_lport *lport = disc->lport; - struct fc_rport_libfc_priv *rp; + struct fc_rport_libfc_priv *rdata; int error = 0; if (rport && ids->port_name) { @@ -436,9 +436,9 @@ static int fc_disc_new_target(struct fc_disc *disc, error = -ENOMEM; } if (rport) { - rp = rport->dd_data; - rp->ops = &fc_disc_rport_ops; - rp->rp_state = RPORT_ST_INIT; + rdata = rport->dd_data; + rdata->ops = &fc_disc_rport_ops; + rdata->rp_state = RPORT_ST_INIT; lport->tt.rport_login(rport); } } -- cgit v1.2.3 From efaf5c085dd2d31757b0ff7886970dfddd8d1808 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:34 -0800 Subject: [SCSI] libfc: check for err when recv and state is incorrect If we've just created an interface and the an rport is logging in we may have a request on the wire (say PRLI). If we destroy the interface, we'll go through each rport on the disc->rports list and set each rport's state to NONE. Then the lport will reset the EM. The EM reset will send a CLOSED event to the prli_resp() handler which will notice that the state != PRLI. In this case it frees the frame pointer, decrements the refcount and unlocks the rport. The problem is that there isn't a frame in this case. It's just a pointer with an embedded error code. The free causes an Oops. This patch moves the error checking to be before the state checking. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 50 +++++++++++++++++++++---------------------- drivers/scsi/libfc/fc_rport.c | 30 +++++++++++++------------- 2 files changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 07335ae2947c..c00de2244c78 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1031,17 +1031,17 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RFT_ID response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1083,17 +1083,17 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RPN_ID response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1133,17 +1133,17 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a SCR response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1359,17 +1359,17 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a LOGO response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1443,17 +1443,17 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a FLOGI response\n"); + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); goto out; } - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 81b3ca188789..4f23a9bb15a1 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -505,17 +505,17 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +614,17 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -764,17 +764,17 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); goto out; } - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; -- cgit v1.2.3 From 0ae4d4ae47d2ccbcad813b0d6d8fe12590c7d648 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 27 Feb 2009 10:55:39 -0800 Subject: [SCSI] libfc: Cleanup libfc_function_template comments Made the comments more like the comments for struct scsi_host_template. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/libfc.h | 107 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 66 insertions(+), 41 deletions(-) diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 37df48e13b97..282829cdf352 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -336,31 +336,17 @@ struct fc_exch { struct libfc_function_template { - /** - * Mandatory Fields - * - * These handlers must be implemented by the LLD. - */ - /* * Interface to send a FC frame - */ - int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp); - - /** - * Optional Fields * - * The LLD may choose to implement any of the following handlers. - * If LLD doesn't specify hander and leaves its pointer NULL then - * the default libfc function will be used for that handler. - */ - - /** - * ELS/CT interfaces + * STATUS: REQUIRED */ + int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp); /* - * elsct_send - sends ELS/CT frame + * Interface to send ELS/CT frames + * + * STATUS: OPTIONAL */ struct fc_seq *(*elsct_send)(struct fc_lport *lport, struct fc_rport *rport, @@ -370,9 +356,6 @@ struct libfc_function_template { struct fc_frame *fp, void *arg), void *arg, u32 timer_msec); - /** - * Exhance Manager interfaces - */ /* * Send the FC frame payload using a new exchange and sequence. @@ -404,6 +387,8 @@ struct libfc_function_template { * timer_msec argument is specified. The timer is canceled when * it fires or when the exchange is done. The exchange timeout handler * is registered by EM layer. + * + * STATUS: OPTIONAL */ struct fc_seq *(*exch_seq_send)(struct fc_lport *lp, struct fc_frame *fp, @@ -415,14 +400,18 @@ struct libfc_function_template { void *arg, unsigned int timer_msec); /* - * send a frame using existing sequence and exchange. + * Send a frame using an existing sequence and exchange. + * + * STATUS: OPTIONAL */ int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp); /* - * Send ELS response using mainly infomation - * in exchange and sequence in EM layer. + * Send an ELS response using infomation from a previous + * exchange and sequence. + * + * STATUS: OPTIONAL */ void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd, struct fc_seq_els_data *els_data); @@ -434,6 +423,8 @@ struct libfc_function_template { * A timer_msec can be specified for abort timeout, if non-zero * timer_msec value is specified then exchange resp handler * will be called with timeout error if no response to abort. + * + * STATUS: OPTIONAL */ int (*seq_exch_abort)(const struct fc_seq *req_sp, unsigned int timer_msec); @@ -441,6 +432,8 @@ struct libfc_function_template { /* * Indicate that an exchange/sequence tuple is complete and the memory * allocated for the related objects may be freed. + * + * STATUS: OPTIONAL */ void (*exch_done)(struct fc_seq *sp); @@ -448,6 +441,8 @@ struct libfc_function_template { * Assigns a EM and a free XID for an new exchange and then * allocates a new exchange and sequence pair. * The fp can be used to determine free XID. + * + * STATUS: OPTIONAL */ struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp); @@ -455,12 +450,16 @@ struct libfc_function_template { * Release previously assigned XID by exch_get API. * The LLD may implement this if XID is assigned by LLD * in exch_get(). + * + * STATUS: OPTIONAL */ void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp, u16 ex_id); /* * Start a new sequence on the same exchange/sequence tuple. + * + * STATUS: OPTIONAL */ struct fc_seq *(*seq_start_next)(struct fc_seq *sp); @@ -468,26 +467,33 @@ struct libfc_function_template { * Reset an exchange manager, completing all sequences and exchanges. * If s_id is non-zero, reset only exchanges originating from that FID. * If d_id is non-zero, reset only exchanges sending to that FID. + * + * STATUS: OPTIONAL */ void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id); - void (*rport_flush_queue)(void); - /** - * Local Port interfaces + /* + * Flush the rport work queue. Generally used before shutdown. + * + * STATUS: OPTIONAL */ + void (*rport_flush_queue)(void); /* - * Receive a frame to a local port. + * Receive a frame for a local port. + * + * STATUS: OPTIONAL */ void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp); - int (*lport_reset)(struct fc_lport *); - - /** - * Remote Port interfaces + /* + * Reset the local port. + * + * STATUS: OPTIONAL */ + int (*lport_reset)(struct fc_lport *); /* * Create a remote port @@ -502,26 +508,33 @@ struct libfc_function_template { * - PLOGI * - PRLI * - RTV + * + * STATUS: OPTIONAL */ int (*rport_login)(struct fc_rport *rport); /* * Logoff, and remove the rport from the transport if * it had been added. This will send a LOGO to the target. + * + * STATUS: OPTIONAL */ int (*rport_logoff)(struct fc_rport *rport); /* * Recieve a request from a remote port. + * + * STATUS: OPTIONAL */ void (*rport_recv_req)(struct fc_seq *, struct fc_frame *, struct fc_rport *); - struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32); - - /** - * FCP interfaces + /* + * lookup an rport by it's port ID. + * + * STATUS: OPTIONAL */ + struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32); /* * Send a fcp cmd from fsp pkt. @@ -529,30 +542,38 @@ struct libfc_function_template { * * The resp handler is called when FCP_RSP received. * + * STATUS: OPTIONAL */ int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp, void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg)); /* - * Used at least durring linkdown and reset + * Cleanup the FCP layer, used durring link down and reset + * + * STATUS: OPTIONAL */ void (*fcp_cleanup)(struct fc_lport *lp); /* * Abort all I/O on a local port + * + * STATUS: OPTIONAL */ void (*fcp_abort_io)(struct fc_lport *lp); - /** - * Discovery interfaces + /* + * Receive a request for the discovery layer. + * + * STATUS: OPTIONAL */ - void (*disc_recv_req)(struct fc_seq *, struct fc_frame *, struct fc_lport *); /* * Start discovery for a local port. + * + * STATUS: OPTIONAL */ void (*disc_start)(void (*disc_callback)(struct fc_lport *, enum fc_disc_event), @@ -561,6 +582,8 @@ struct libfc_function_template { /* * Stop discovery for a given lport. This will remove * all discovered rports + * + * STATUS: OPTIONAL */ void (*disc_stop) (struct fc_lport *); @@ -568,6 +591,8 @@ struct libfc_function_template { * Stop discovery for a given lport. This will block * until all discovered rports are deleted from the * FC transport class + * + * STATUS: OPTIONAL */ void (*disc_stop_final) (struct fc_lport *); }; -- cgit v1.2.3 From ff392c497b43ddedbab5627b53928a654cc5486e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:36 -0500 Subject: xfs: prevent kernel crash due to corrupted inode log format Andras Korn reported an oops on log replay causes by a corrupted xfs_inode_log_format_t passing a 0 size to kmem_zalloc. This patch handles to small or too large numbers of log regions gracefully by rejecting the log replay with a useful error message. Signed-off-by: Christoph Hellwig Reported-by: Andras Korn Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/xfs_log_recover.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index b1047de2fffd..61af610d79b3 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1455,10 +1455,19 @@ xlog_recover_add_to_trans( item = item->ri_prev; if (item->ri_total == 0) { /* first region to be added */ - item->ri_total = in_f->ilf_size; - ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM); - item->ri_buf = kmem_zalloc((item->ri_total * - sizeof(xfs_log_iovec_t)), KM_SLEEP); + if (in_f->ilf_size == 0 || + in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) { + xlog_warn( + "XFS: bad number of regions (%d) in inode log format", + in_f->ilf_size); + ASSERT(0); + return XFS_ERROR(EIO); + } + + item->ri_total = in_f->ilf_size; + item->ri_buf = + kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t), + KM_SLEEP); } ASSERT(item->ri_total > item->ri_cnt); /* Description region is ri_buf[0] */ -- cgit v1.2.3 From 7d46be4a25fdfb503c20bad60a618adebfe2ac5c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:35 -0500 Subject: xfs: prevent lockdep false positive in xfs_iget_cache_miss The inode can't be locked by anyone else as we just created it a few lines above and it's not been added to any lookup data structure yet. So use a trylock that must succeed to get around the lockdep warnings. Signed-off-by: Christoph Hellwig Reported-by: Alexander Beregalov Reviewed-by: Eric Sandeen Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher --- fs/xfs/xfs_iget.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index e2fb6210d4c5..478e587087fe 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -246,9 +246,6 @@ xfs_iget_cache_miss( goto out_destroy; } - if (lock_flags) - xfs_ilock(ip, lock_flags); - /* * Preload the radix tree so we can insert safely under the * write spinlock. Note that we cannot sleep inside the preload @@ -256,7 +253,16 @@ xfs_iget_cache_miss( */ if (radix_tree_preload(GFP_KERNEL)) { error = EAGAIN; - goto out_unlock; + goto out_destroy; + } + + /* + * Because the inode hasn't been added to the radix-tree yet it can't + * be found by another thread, so we can do the non-sleeping lock here. + */ + if (lock_flags) { + if (!xfs_ilock_nowait(ip, lock_flags)) + BUG(); } mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1); @@ -284,7 +290,6 @@ xfs_iget_cache_miss( out_preload_end: write_unlock(&pag->pag_ici_lock); radix_tree_preload_end(); -out_unlock: if (lock_flags) xfs_iunlock(ip, lock_flags); out_destroy: -- cgit v1.2.3 From c141b2928fe20396a9ecdec85526e4b66ae96c90 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:37 -0500 Subject: xfs: only issues a cache flush on unmount if barriers are enabled Currently we unconditionally issue a flush from xfs_free_buftarg, but since 2.6.29-rc1 this gives a warning in the style of end_request: I/O error, dev vdb, sector 0 Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/xfs_buf.c | 12 ++++++++++-- fs/xfs/linux-2.6/xfs_buf.h | 2 +- fs/xfs/linux-2.6/xfs_super.c | 10 +++++----- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index cb329edc925b..aa1016bb9134 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -34,6 +34,12 @@ #include #include +#include "xfs_sb.h" +#include "xfs_inum.h" +#include "xfs_ag.h" +#include "xfs_dmapi.h" +#include "xfs_mount.h" + static kmem_zone_t *xfs_buf_zone; STATIC int xfsbufd(void *); STATIC int xfsbufd_wakeup(int, gfp_t); @@ -1435,10 +1441,12 @@ xfs_unregister_buftarg( void xfs_free_buftarg( - xfs_buftarg_t *btp) + struct xfs_mount *mp, + struct xfs_buftarg *btp) { xfs_flush_buftarg(btp, 1); - xfs_blkdev_issue_flush(btp); + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_blkdev_issue_flush(btp); xfs_free_bufhash(btp); iput(btp->bt_mapping->host); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index 288ae7c4c800..9b4d666ad31f 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -413,7 +413,7 @@ static inline int XFS_bwrite(xfs_buf_t *bp) * Handling of buftargs. */ extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int); -extern void xfs_free_buftarg(xfs_buftarg_t *); +extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *); extern void xfs_wait_buftarg(xfs_buftarg_t *); extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int); extern int xfs_flush_buftarg(xfs_buftarg_t *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index c71e226da7f5..32ae5028e96b 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -734,15 +734,15 @@ xfs_close_devices( { if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { struct block_device *logdev = mp->m_logdev_targp->bt_bdev; - xfs_free_buftarg(mp->m_logdev_targp); + xfs_free_buftarg(mp, mp->m_logdev_targp); xfs_blkdev_put(logdev); } if (mp->m_rtdev_targp) { struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev; - xfs_free_buftarg(mp->m_rtdev_targp); + xfs_free_buftarg(mp, mp->m_rtdev_targp); xfs_blkdev_put(rtdev); } - xfs_free_buftarg(mp->m_ddev_targp); + xfs_free_buftarg(mp, mp->m_ddev_targp); } /* @@ -811,9 +811,9 @@ xfs_open_devices( out_free_rtdev_targ: if (mp->m_rtdev_targp) - xfs_free_buftarg(mp->m_rtdev_targp); + xfs_free_buftarg(mp, mp->m_rtdev_targp); out_free_ddev_targ: - xfs_free_buftarg(mp->m_ddev_targp); + xfs_free_buftarg(mp, mp->m_ddev_targp); out_close_rtdev: if (rtdev) xfs_blkdev_put(rtdev); -- cgit v1.2.3 From 96deff6baf55da68b4b9b4dfe8ef572c6f1835fd Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Fri, 6 Mar 2009 15:56:53 -0500 Subject: ASoC: Davinci: Fix incorrect machine type for SFFSDR board Signed-off-by: Hugo Villeneuve Signed-off-by: Mark Brown --- sound/soc/davinci/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig index b502741692d6..bd7392c9657e 100644 --- a/sound/soc/davinci/Kconfig +++ b/sound/soc/davinci/Kconfig @@ -20,7 +20,7 @@ config SND_DAVINCI_SOC_EVM config SND_DAVINCI_SOC_SFFSDR tristate "SoC Audio support for SFFSDR" - depends on SND_DAVINCI_SOC && MACH_DAVINCI_SFFSDR + depends on SND_DAVINCI_SOC && MACH_SFFSDR select SND_DAVINCI_SOC_I2S select SND_SOC_PCM3008 select SFFSDR_FPGA -- cgit v1.2.3 From 3a638ff272744247aad4a75b1fac174ac5746114 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 6 Mar 2009 18:39:34 -0600 Subject: ASoC: Improve pause/unpause performance in Freescale 8610 drivers Add support for true pause and unpause. Without this, mplayer will drop some audio (less than one second, but still noticeable) when pausing playback. Remove support for PM suspend and resume from the trigger function, since the driver doesn't support PM anyway. Optimize the delay after starting capture. Instead of delaying 1ms, the driver now polls the hardware. The new delay is shorter by over 90% yet still effective. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_dma.c | 3 ++- sound/soc/fsl/fsl_ssi.c | 23 ++++++++++++++--------- 2 files changed, 16 insertions(+), 10 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 58a3fa497503..b3eb8570cd7b 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -142,7 +142,8 @@ static const struct snd_pcm_hardware fsl_dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_JOINT_DUPLEX, + SNDRV_PCM_INFO_JOINT_DUPLEX | + SNDRV_PCM_INFO_PAUSE, .formats = FSLDMA_PCM_FORMATS, .rates = FSLDMA_PCM_RATES, .rate_min = 5512, diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 8cb6bcf2c00f..b7733e6be192 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -464,28 +464,33 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); } else { - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + long timeout = jiffies + 10; + setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); - /* - * I think we need this delay to allow time for the SSI - * to put data into its FIFO. Without it, ALSA starts - * to complain about overruns. + /* Wait until the SSI has filled its FIFO. Without this + * delay, ALSA complains about overruns. When the FIFO + * is full, the DMA controller initiates its first + * transfer. Until then, however, the DMA's DAR + * register is zero, which translates to an + * out-of-bounds pointer. This makes ALSA think an + * overrun has occurred. */ - mdelay(1); + while (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0) && + (jiffies < timeout)); + if (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0)) + return -EIO; } break; case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) clrbits32(&ssi->scr, CCSR_SSI_SCR_TE); -- cgit v1.2.3 From d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Sat, 7 Mar 2009 13:31:29 +0100 Subject: kbuild: fix C libary confusion in unifdef.c due to getline() This fixes an error when compiling the kernel. CHK include/linux/version.h HOSTCC scripts/unifdef scripts/unifdef.c:209: error: conflicting types for 'getline' /usr/include/stdio.h:651: note: previous declaration of 'getline' was here make[1]: *** [scripts/unifdef] Error 1 make: *** [__headers] Error 2 Signed-off-by: Justin P. Mattock Cc: Frederic Weisbecker Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/unifdef.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 552025e72acb..05a31a6c7e1b 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -206,7 +206,7 @@ static void done(void); static void error(const char *); static int findsym(const char *); static void flushline(bool); -static Linetype getline(void); +static Linetype get_line(void); static Linetype ifeval(const char **); static void ignoreoff(void); static void ignoreon(void); @@ -512,7 +512,7 @@ process(void) for (;;) { linenum++; - lineval = getline(); + lineval = get_line(); trans_table[ifstate[depth]][lineval](); debug("process %s -> %s depth %d", linetype_name[lineval], @@ -526,7 +526,7 @@ process(void) * help from skipcomment(). */ static Linetype -getline(void) +get_line(void) { const char *cp; int cursym; -- cgit v1.2.3 From a2ebcc7a863761b6d59a4183c600edf5af63b8d2 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Sun, 22 Feb 2009 10:54:55 -0800 Subject: kbuild: fix mkspec to cleanup RPM_BUILD_ROOT The contents of the %clean section in mkspec is currently commented out leaving RPM_BUILD_ROOT and its contents on the build machine. This patch removes it once the rpm build process is complete. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg --- scripts/package/mkspec | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/mkspec b/scripts/package/mkspec index ee448cdc6a2b..3d93f8c81252 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -96,7 +96,7 @@ echo "%endif" echo "" echo "%clean" -echo '#echo -rf $RPM_BUILD_ROOT' +echo 'rm -rf $RPM_BUILD_ROOT' echo "" echo "%files" echo '%defattr (-, root, root)' -- cgit v1.2.3 From b925dbfe3c59b637666670a60473a15d29e0a7a7 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Thu, 12 Feb 2009 10:16:05 -0800 Subject: kbuild: fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild. mkspec creates kernel.spec using KERNELRELEASE: echo "%files" echo '%defattr (-, root, root)' echo "%dir /lib/modules" echo "/lib/modules/$KERNELRELEASE" echo "/lib/firmware" echo "/boot/*" echo "" When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any additional version info from SCM. Next, the srctree is tarred up and SCM information is excluded. rpmbuild reruns make and in the process generates a new include/config/kernel.release and thus a new KERNELRELEASE. However this time the SCM information is gone so KERNELRELEASE no longer has the additional version information. When "make modules_install" runs, it uses the new KERNELRELEASE value to determine where to install the modules. This conflicts with where the spec file assumes they are going because of the mis-matching KERNELRELEASE versions. + INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root + make -j16 modules_install INSTALL crypto/aead.ko INSTALL crypto/cbc.ko INSTALL crypto/chainiv.ko INSTALL crypto/crc32c.ko INSTALL crypto/crypto_algapi.ko INSTALL crypto/crypto_blkcipher.ko INSTALL crypto/crypto_hash.ko INSTALL crypto/cryptomgr.ko INSTALL crypto/ecb.ko INSTALL crypto/eseqiv.ko INSTALL crypto/krng.ko INSTALL crypto/md5.ko INSTALL crypto/pcbc.ko INSTALL crypto/rng.ko INSTALL drivers/block/cciss.ko INSTALL drivers/hid/hid-dummy.ko INSTALL drivers/scsi/iscsi_tcp.ko INSTALL drivers/scsi/libiscsi.ko INSTALL drivers/scsi/libiscsi_tcp.ko INSTALL drivers/scsi/scsi_transport_iscsi.ko INSTALL drivers/scsi/scsi_wait_scan.ko INSTALL fs/lockd/lockd.ko INSTALL fs/nfs/nfs.ko INSTALL fs/nfsd/nfsd.ko INSTALL lib/libcrc32c.ko INSTALL net/sunrpc/sunrpc.ko DEPMOD 2.6.29-rc4-tip + cp arch/x86/boot/bzImage /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422 + cp System.map /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422 + cp .config /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422 + cp vmlinux vmlinux.orig + bzip2 -9 vmlinux + mv vmlinux.bz2 /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2 + mv vmlinux.orig vmlinux + /usr/lib/rpm/brp-compress Processing files: kernel-2.6.29rc4tip01479g5d85422-2 error: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 RPM build errors: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 make[1]: *** [rpm] Error 1 make: *** [rpm] Error 2 I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both with and without CONFIG_LOCALVERSION_AUTO=y. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg ---- --- Makefile | 16 +++++++++++----- scripts/package/Makefile | 3 ++- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/Makefile b/Makefile index d04ee0ad1dcc..55424172bea4 100644 --- a/Makefile +++ b/Makefile @@ -904,12 +904,18 @@ localver = $(subst $(space),, $(string) \ # and if the SCM is know a tag from the SCM is appended. # The appended tag is determined by the SCM used. # -# Currently, only git is supported. -# Other SCMs can edit scripts/setlocalversion and add the appropriate -# checks as needed. +# .scmversion is used when generating rpm packages so we do not loose +# the version information from the SCM when we do the build of the kernel +# from the copied source ifdef CONFIG_LOCALVERSION_AUTO - _localver-auto = $(shell $(CONFIG_SHELL) \ - $(srctree)/scripts/setlocalversion $(srctree)) + +ifeq ($(wildcard .scmversion),) + _localver-auto = $(shell $(CONFIG_SHELL) \ + $(srctree)/scripts/setlocalversion $(srctree)) +else + _localver-auto = $(shell cat .scmversion 2> /dev/null) +endif + localver-auto = $(LOCALVERSION)$(_localver-auto) endif diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 8c6b7b09606a..fa4a0a17b7e0 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -35,9 +35,10 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile rpm-pkg rpm: $(objtree)/kernel.spec FORCE $(MAKE) clean $(PREV) ln -sf $(srctree) $(KERNELPATH) + $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion $(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/. $(PREV) rm $(KERNELPATH) - + rm -f $(objtree)/.scmversion set -e; \ $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version set -e; \ -- cgit v1.2.3 From 75bccd881a49d2da796ec0852158f957dc023f61 Mon Sep 17 00:00:00 2001 From: Gilles Espinasse Date: Sat, 7 Mar 2009 13:57:25 +0100 Subject: kbuild: remove unused -r option for module-init-tool depmod Following a thread on busybox mailing list depmod -r option is ignored by module-init-tools depmod -r option break busybox depmod. So the best solution look to remove -r from kernel Makefile Signed-off-by: Gilles Espinasse Signed-off-by: Sam Ravnborg --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 55424172bea4..5a5b82eaaec2 100644 --- a/Makefile +++ b/Makefile @@ -1543,7 +1543,7 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) cmd_depmod = \ if [ -r System.map -a -x $(DEPMOD) ]; then \ $(DEPMOD) -ae -F System.map \ - $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \ + $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \ $(KERNELRELEASE); \ fi -- cgit v1.2.3 From ab96ddec7213004b632d24dc2cdcd2df5f16f50b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 7 Mar 2009 13:39:22 -0800 Subject: Input: serio - fix protocol number for TouchIT213 Protocol 0x37 has been reserved for iNexio devices and Sahara was supposed to get 0x38. Reported-by: Claudio Nieder Signed-off-by: Dmitry Torokhov --- include/linux/serio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/serio.h b/include/linux/serio.h index 1bcb357a01a1..e0417e4d3f15 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -212,7 +212,7 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_FUJITSU 0x35 #define SERIO_ZHENHUA 0x36 #define SERIO_INEXIO 0x37 -#define SERIO_TOUCHIT213 0x37 +#define SERIO_TOUCHIT213 0x38 #define SERIO_W8001 0x39 #endif -- cgit v1.2.3 From cda56ac29f2d8288d62978272856884d26e0b47b Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 10 Feb 2009 16:32:33 +0200 Subject: mmc: fix data timeout for SEND_EXT_CSD Commit 0d3e0460f307e84904968aad6cff97bd688583d8 "MMC: CSD and CID timeout values" inadvertently broke the timeout for the MMC command SEND_EXT_CSD. This patch puts it back again. Depending on the characteristics of the controller, this bug may prevent the use of MMC cards. Signed-off-by: Adrian Hunter Signed-off-by: Pierre Ossman --- drivers/mmc/core/mmc_ops.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 9c50e6f1c236..34ce2703d29a 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -248,12 +248,15 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, sg_init_one(&sg, data_buf, len); - /* - * The spec states that CSR and CID accesses have a timeout - * of 64 clock cycles. - */ - data.timeout_ns = 0; - data.timeout_clks = 64; + if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) { + /* + * The spec states that CSR and CID accesses have a timeout + * of 64 clock cycles. + */ + data.timeout_ns = 0; + data.timeout_clks = 64; + } else + mmc_set_data_timeout(&data, card); mmc_wait_for_req(host, &mrq); -- cgit v1.2.3 From 4302e5d53b9166d45317e3ddf0a7a9dab3efd43b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 5 Mar 2009 11:45:48 +0100 Subject: MIPS: compat: Implement is_compat_task. This is a build fix required after "x86-64: seccomp: fix 32/64 syscall hole" (commit 5b1017404aea6d2e552e991b3fd814d839e9cd67). MIPS doesn't have the issue that was fixed for x86-64 by that patch. This also doesn't solve the N32 issue which is that N32 seccomp processes will be treated as non-compat processes thus only have access to N64 syscalls. Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- arch/mips/include/asm/compat.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index ac5d541368e9..6c5b40905dd6 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -3,6 +3,8 @@ /* * Architecture specific compatibility types */ +#include +#include #include #include #include @@ -218,4 +220,9 @@ struct compat_shmid64_ds { compat_ulong_t __unused2; }; +static inline int is_compat_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + #endif /* _ASM_COMPAT_H */ -- cgit v1.2.3 From b191f63c4fe9fbcfe583180228080d02b8dcdebc Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sun, 8 Mar 2009 17:51:52 +0100 Subject: ASoC: bring cs4270 feature/limitations list in sync Removes numbers from the list of features/limitations and makes it reflect recent changes to the code. Signed-off-by: Daniel Mack Acked-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f86f33cc1798..0e0c23ee6afc 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -12,14 +12,13 @@ * * Current features/limitations: * - * 1) Software mode is supported. Stand-alone mode is not supported. - * 2) Only I2C is supported, not SPI - * 3) Only Master mode is supported, not Slave. - * 4) The machine driver's 'startup' function must call - * cs4270_set_dai_sysclk() with the value of MCLK. - * 5) Only I2S and left-justified modes are supported - * 6) Power management is not supported - * 7) The only supported control is volume and hardware mute (if enabled) + * - Software mode is supported. Stand-alone mode is not supported. + * - Only I2C is supported, not SPI + * - Support for master and slave mode + * - The machine driver's 'startup' function must call + * cs4270_set_dai_sysclk() with the value of MCLK. + * - Only I2S and left-justified modes are supported + * - Power management is not supported */ #include -- cgit v1.2.3 From d0fc63f7bd07cb779a06dc1cdd0c5a14e7f5d562 Mon Sep 17 00:00:00 2001 From: Stuart Bennett Date: Sun, 8 Mar 2009 20:21:35 +0200 Subject: x86 mmiotrace: fix remove_kmmio_fault_pages() Impact: fix race+crash in mmiotrace The list manipulation in remove_kmmio_fault_pages() was broken. If more than one consecutive kmmio_fault_page was re-added during the grace period between unregister_kmmio_probe() and remove_kmmio_fault_pages(), the list manipulation failed to remove pages from the release list. After a second grace period the pages get into rcu_free_kmmio_fault_pages() and raise a BUG_ON() kernel crash. The list manipulation is fixed to properly remove pages from the release list. This bug has been present from the very beginning of mmiotrace in the mainline kernel. It was introduced in 0fd0e3da ("x86: mmiotrace full patch, preview 1"); An urgent fix for Linus. Tested by Stuart (on 32-bit) and Pekka (on amd and intel 64-bit systems, nouveau and nvidia proprietary). Signed-off-by: Stuart Bennett Signed-off-by: Pekka Paalanen LKML-Reference: <20090308202135.34933feb@daedalus.pq.iki.fi> Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 9f205030d9aa..6a518dd08a36 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -451,23 +451,24 @@ static void rcu_free_kmmio_fault_pages(struct rcu_head *head) static void remove_kmmio_fault_pages(struct rcu_head *head) { - struct kmmio_delayed_release *dr = container_of( - head, - struct kmmio_delayed_release, - rcu); + struct kmmio_delayed_release *dr = + container_of(head, struct kmmio_delayed_release, rcu); struct kmmio_fault_page *p = dr->release_list; struct kmmio_fault_page **prevp = &dr->release_list; unsigned long flags; + spin_lock_irqsave(&kmmio_lock, flags); while (p) { - if (!p->count) + if (!p->count) { list_del_rcu(&p->list); - else + prevp = &p->release_next; + } else { *prevp = p->release_next; - prevp = &p->release_next; + } p = p->release_next; } spin_unlock_irqrestore(&kmmio_lock, flags); + /* This is the real RCU destroy call. */ call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); } -- cgit v1.2.3 From 055a49b0c92c6282e7db22e9e6ebcae6cb74ebb4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 8 Mar 2009 18:57:34 +0000 Subject: ASoC: Remove unneeded forward reference to WM8753 SPI implementation Signed-off-by: Mark Brown --- sound/soc/codecs/wm8753.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 7f353e935d71..1d5eca89de60 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -51,11 +51,6 @@ #include "wm8753.h" -#ifdef CONFIG_SPI_MASTER -static struct spi_driver wm8753_spi_driver; -static int wm8753_spi_write(struct spi_device *spi, const char *data, int len); -#endif - static int caps_charge = 2000; module_param(caps_charge, int, 0); MODULE_PARM_DESC(caps_charge, "WM8753 cap charge time (msecs)"); -- cgit v1.2.3 From cbd88c8e6f5cdb8d4b9af01df825305200240382 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 9 Mar 2009 10:06:22 -0600 Subject: lguest: fix crash 'unhandled trap 13 at ' Impact: fix lguest boot crash on modern Intel machines The code in early_init_intel does: if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { u64 misc_enable; rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); And that rdmsr faults (not allowed from non-0 PL). We can get around this by mugging the family ID part of the cpuid. 5 seems like a good number. Of course, this is a hack (how very lguest!). We could just indicate that we don't support MSRs, or implement lguest_rdmst. Reported-by: Patrick McHardy Signed-off-by: Rusty Russell Tested-by: Patrick McHardy --- arch/x86/lguest/boot.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 92f1c6f3e19d..ba5c05e97f10 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -343,6 +343,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, * flush_tlb_user() for both user and kernel mappings unless * the Page Global Enable (PGE) feature bit is set. */ *dx |= 0x00002000; + /* We also lie, and say we're family id 5. 6 or greater + * leads to a rdmsr in early_init_intel which we can't handle. + * Family ID is returned as bits 8-12 in ax. */ + *ax &= 0xFFFFF0FF; + *ax |= 0x00000500; break; case 0x80000000: /* Futureproof this a little: if they ask how much extended -- cgit v1.2.3 From 6db6a5f3ae2ca6b874b0fd97ae16fdc9b5cdd6cc Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 9 Mar 2009 10:06:28 -0600 Subject: lguest: fix for CONFIG_SPARSE_IRQ=y Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y We now need to call irq_to_desc_alloc_cpu() before set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no kmalloc available). So do it as we use interrupts instead. Also means we only alloc for irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway. Signed-off-by: Rusty Russell Cc: Ingo Molnar --- arch/x86/lguest/boot.c | 16 +++++++++------- drivers/lguest/lguest_device.c | 6 ++++++ 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index ba5c05e97f10..960a8d9c049c 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -594,19 +594,21 @@ static void __init lguest_init_IRQ(void) /* Some systems map "vectors" to interrupts weirdly. Lguest has * a straightforward 1 to 1 mapping, so force that here. */ __get_cpu_var(vector_irq)[vector] = i; - if (vector != SYSCALL_VECTOR) { - set_intr_gate(vector, - interrupt[vector-FIRST_EXTERNAL_VECTOR]); - set_irq_chip_and_handler_name(i, &lguest_irq_controller, - handle_level_irq, - "level"); - } + if (vector != SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); } /* This call is required to set up for 4k stacks, where we have * separate stacks for hard and soft interrupts. */ irq_ctx_init(smp_processor_id()); } +void lguest_setup_irq(unsigned int irq) +{ + irq_to_desc_alloc_cpu(irq, 0); + set_irq_chip_and_handler_name(irq, &lguest_irq_controller, + handle_level_irq, "level"); +} + /* * Time. * diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index b4d44e571d76..8132533d71f9 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -212,6 +212,9 @@ static void lg_notify(struct virtqueue *vq) hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0); } +/* An extern declaration inside a C file is bad form. Don't do it. */ +extern void lguest_setup_irq(unsigned int irq); + /* This routine finds the first virtqueue described in the configuration of * this device and sets it up. * @@ -266,6 +269,9 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, goto unmap; } + /* Make sure the interrupt is allocated. */ + lguest_setup_irq(lvq->config.irq); + /* Tell the interrupt for this virtqueue to go to the virtio_ring * interrupt handler. */ /* FIXME: We used to have a flag for the Host to tell us we could use -- cgit v1.2.3 From f271fa28fbaf947d9c79f188dd149176da727dd5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Mar 2009 00:52:17 +0100 Subject: ASoC: Fix Kconfig dependency of CONFIG_SND_S3C24XX_SOC_JIVE_WM8750 Remove a non-existing Kconfig CONFIG_SND_SOC_WM8750_SPI. Signed-off-by: Takashi Iwai --- sound/soc/s3c24xx/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 78d01ff487cf..2f3a21eee051 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -42,7 +42,6 @@ config SND_S3C24XX_SOC_JIVE_WM8750 tristate "SoC I2S Audio support for Jive" depends on SND_S3C24XX_SOC && MACH_JIVE select SND_SOC_WM8750 - select SND_SOC_WM8750_SPI select SND_S3C2412_SOC_I2S help Sat Y if you want to add support for SoC audio on the Jive. -- cgit v1.2.3 From 0796e75503adc6b0a119493ce2e599fb5fd8f96e Mon Sep 17 00:00:00 2001 From: Friedrich Oslage Date: Sun, 8 Mar 2009 20:13:42 -0700 Subject: sunhme: Fix qfe parent detection. Signed-off-by: Friedrich Oslage Signed-off-by: David S. Miller --- drivers/net/sunhme.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index cc4013be5e18..0ff837a9c804 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -2630,8 +2630,6 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe) int err = -ENODEV; sbus_dp = to_of_device(op->dev.parent)->node; - if (is_qfe) - sbus_dp = to_of_device(op->dev.parent->parent)->node; /* We can match PCI devices too, do not accept those here. */ if (strcmp(sbus_dp->name, "sbus")) -- cgit v1.2.3 From 873591db59e66434fd0a484c92f69fc21100b33d Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 9 Mar 2009 09:12:55 +0100 Subject: sound: oxygen: enable headphone output on Claro cards On the HT-Omega Claro (halo) sound cards, the headphone amplifier must be enabled explicitly by setting a GPIO bit. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen.c | 63 +++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 53 insertions(+), 10 deletions(-) diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index 1d8e2b29745d..72db4c39007f 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -1,5 +1,5 @@ /* - * C-Media CMI8788 driver for C-Media's reference design and for the X-Meridian + * C-Media CMI8788 driver for C-Media's reference design and similar models * * Copyright (c) Clemens Ladisch * @@ -26,6 +26,7 @@ * * GPIO 0 -> DFS0 of AK5385 * GPIO 1 -> DFS1 of AK5385 + * GPIO 8 -> enable headphone amplifier on HT-Omega models */ #include @@ -61,7 +62,8 @@ MODULE_PARM_DESC(enable, "enable card"); enum { MODEL_CMEDIA_REF, /* C-Media's reference design */ MODEL_MERIDIAN, /* AuzenTech X-Meridian */ - MODEL_HALO, /* HT-Omega Claro halo */ + MODEL_CLARO, /* HT-Omega Claro */ + MODEL_CLARO_HALO, /* HT-Omega Claro halo */ }; static struct pci_device_id oxygen_ids[] __devinitdata = { @@ -74,8 +76,8 @@ static struct pci_device_id oxygen_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x147a, 0xa017), .driver_data = MODEL_CMEDIA_REF }, { OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF }, { OXYGEN_PCI_SUBID(0x415a, 0x5431), .driver_data = MODEL_MERIDIAN }, - { OXYGEN_PCI_SUBID(0x7284, 0x9761), .driver_data = MODEL_CMEDIA_REF }, - { OXYGEN_PCI_SUBID(0x7284, 0x9781), .driver_data = MODEL_HALO }, + { OXYGEN_PCI_SUBID(0x7284, 0x9761), .driver_data = MODEL_CLARO }, + { OXYGEN_PCI_SUBID(0x7284, 0x9781), .driver_data = MODEL_CLARO_HALO }, { } }; MODULE_DEVICE_TABLE(pci, oxygen_ids); @@ -86,6 +88,8 @@ MODULE_DEVICE_TABLE(pci, oxygen_ids); #define GPIO_AK5385_DFS_DOUBLE 0x0001 #define GPIO_AK5385_DFS_QUAD 0x0002 +#define GPIO_CLARO_HP 0x0100 + struct generic_data { u8 ak4396_ctl2; u16 saved_wm8785_registers[2]; @@ -196,16 +200,46 @@ static void meridian_init(struct oxygen *chip) ak5385_init(chip); } -static void halo_init(struct oxygen *chip) +static void claro_enable_hp(struct oxygen *chip) +{ + msleep(300); + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_CLARO_HP); + oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, GPIO_CLARO_HP); +} + +static void claro_init(struct oxygen *chip) +{ + ak4396_init(chip); + wm8785_init(chip); + claro_enable_hp(chip); +} + +static void claro_halo_init(struct oxygen *chip) { ak4396_init(chip); ak5385_init(chip); + claro_enable_hp(chip); } static void generic_cleanup(struct oxygen *chip) { } +static void claro_disable_hp(struct oxygen *chip) +{ + oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_CLARO_HP); +} + +static void claro_cleanup(struct oxygen *chip) +{ + claro_disable_hp(chip); +} + +static void claro_suspend(struct oxygen *chip) +{ + claro_disable_hp(chip); +} + static void generic_resume(struct oxygen *chip) { ak4396_registers_init(chip); @@ -217,9 +251,10 @@ static void meridian_resume(struct oxygen *chip) ak4396_registers_init(chip); } -static void halo_resume(struct oxygen *chip) +static void claro_resume(struct oxygen *chip) { ak4396_registers_init(chip); + claro_enable_hp(chip); } static void set_ak4396_params(struct oxygen *chip, @@ -346,14 +381,22 @@ static int __devinit get_oxygen_model(struct oxygen *chip, CAPTURE_0_FROM_I2S_2 | CAPTURE_1_FROM_SPDIF; break; - case MODEL_HALO: - chip->model.init = halo_init; - chip->model.resume = halo_resume; + case MODEL_CLARO: + chip->model.init = claro_init; + chip->model.cleanup = claro_cleanup; + chip->model.suspend = claro_suspend; + chip->model.resume = claro_resume; + break; + case MODEL_CLARO_HALO: + chip->model.init = claro_halo_init; + chip->model.cleanup = claro_cleanup; + chip->model.suspend = claro_suspend; + chip->model.resume = claro_resume; chip->model.set_adc_params = set_ak5385_params; break; } if (id->driver_data == MODEL_MERIDIAN || - id->driver_data == MODEL_HALO) { + id->driver_data == MODEL_CLARO_HALO) { chip->model.misc_flags = OXYGEN_MISC_MIDI; chip->model.device_config |= MIDI_OUTPUT | MIDI_INPUT; } -- cgit v1.2.3 From a381934e5f9c0c3c292d780d61f5be9c22b2ef54 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 9 Mar 2009 02:13:17 +0100 Subject: ASoC: Add a driver for AK4104 S/PDIF transmitter This adds a driver for the SPI connected AK4104 S/PDIF transmitter device. Its features are fairly simple, but as there is need to set up certain bits in the IEC958 information, this better goes into a real driver. Signed-off-by: Daniel Mack Cc: Mark Brown Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak4104.c | 363 ++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/ak4104.h | 7 + 4 files changed, 376 insertions(+) create mode 100644 sound/soc/codecs/ak4104.c create mode 100644 sound/soc/codecs/ak4104.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 628a591c728f..a1af311e7f06 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -14,6 +14,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1980 if SND_SOC_AC97_BUS select SND_SOC_AD73311 if I2C + select SND_SOC_AK4104 if SPI_MASTER select SND_SOC_AK4535 if I2C select SND_SOC_CS4270 if I2C select SND_SOC_PCM3008 @@ -60,6 +61,9 @@ config SND_SOC_AD1980 config SND_SOC_AD73311 tristate +config SND_SOC_AK4104 + tristate + config SND_SOC_AK4535 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 3664cdc300b2..4717c3c99040 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,6 +1,7 @@ snd-soc-ac97-objs := ac97.o snd-soc-ad1980-objs := ad1980.o snd-soc-ad73311-objs := ad73311.o +snd-soc-ak4104-objs := ak4104.o snd-soc-ak4535-objs := ak4535.o snd-soc-cs4270-objs := cs4270.o snd-soc-l3-objs := l3.o @@ -30,6 +31,7 @@ snd-soc-wm9713-objs := wm9713.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o +obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c new file mode 100644 index 000000000000..338381f4fe1e --- /dev/null +++ b/sound/soc/codecs/ak4104.c @@ -0,0 +1,363 @@ +/* + * AK4104 ALSA SoC (ASoC) driver + * + * Copyright (c) 2009 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include "ak4104.h" + +/* AK4104 registers addresses */ +#define AK4104_REG_CONTROL1 0x00 +#define AK4104_REG_RESERVED 0x01 +#define AK4104_REG_CONTROL2 0x02 +#define AK4104_REG_TX 0x03 +#define AK4104_REG_CHN_STATUS(x) ((x) + 0x04) +#define AK4104_NUM_REGS 10 + +#define AK4104_REG_MASK 0x1f +#define AK4104_READ 0xc0 +#define AK4104_WRITE 0xe0 +#define AK4104_RESERVED_VAL 0x5b + +/* Bit masks for AK4104 registers */ +#define AK4104_CONTROL1_RSTN (1 << 0) +#define AK4104_CONTROL1_PW (1 << 1) +#define AK4104_CONTROL1_DIF0 (1 << 2) +#define AK4104_CONTROL1_DIF1 (1 << 3) + +#define AK4104_CONTROL2_SEL0 (1 << 0) +#define AK4104_CONTROL2_SEL1 (1 << 1) +#define AK4104_CONTROL2_MODE (1 << 2) + +#define AK4104_TX_TXE (1 << 0) +#define AK4104_TX_V (1 << 1) + +#define DRV_NAME "ak4104" + +struct ak4104_private { + struct snd_soc_codec codec; + u8 reg_cache[AK4104_NUM_REGS]; +}; + +static int ak4104_fill_cache(struct snd_soc_codec *codec) +{ + int i; + u8 *reg_cache = codec->reg_cache; + struct spi_device *spi = codec->control_data; + + for (i = 0; i < codec->reg_cache_size; i++) { + int ret = spi_w8r8(spi, i | AK4104_READ); + if (ret < 0) { + dev_err(&spi->dev, "SPI write failure\n"); + return ret; + } + + reg_cache[i] = ret; + } + + return 0; +} + +static unsigned int ak4104_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u8 *reg_cache = codec->reg_cache; + + if (reg >= codec->reg_cache_size) + return -EINVAL; + + return reg_cache[reg]; +} + +static int ak4104_spi_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 *cache = codec->reg_cache; + struct spi_device *spi = codec->control_data; + + if (reg >= codec->reg_cache_size) + return -EINVAL; + + reg &= AK4104_REG_MASK; + reg |= AK4104_WRITE; + + /* only write to the hardware if value has changed */ + if (cache[reg] != value) { + u8 tmp[2] = { reg, value }; + if (spi_write(spi, tmp, sizeof(tmp))) { + dev_err(&spi->dev, "SPI write failed\n"); + return -EIO; + } + + cache[reg] = value; + } + + return 0; +} + +static int ak4104_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int format) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int val = 0; + + val = ak4104_read_reg_cache(codec, AK4104_REG_CONTROL1); + if (val < 0) + return val; + + val &= ~(AK4104_CONTROL1_DIF0 | AK4104_CONTROL1_DIF1); + + /* set DAI format */ + switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + val |= AK4104_CONTROL1_DIF0; + break; + case SND_SOC_DAIFMT_I2S: + val |= AK4104_CONTROL1_DIF0 | AK4104_CONTROL1_DIF1; + break; + default: + dev_err(codec->dev, "invalid dai format\n"); + return -EINVAL; + } + + /* This device can only be slave */ + if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) + return -EINVAL; + + return ak4104_spi_write(codec, AK4104_REG_CONTROL1, val); +} + +static int ak4104_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + int val = 0; + + /* set the IEC958 bits: consumer mode, no copyright bit */ + val |= IEC958_AES0_CON_NOT_COPYRIGHT; + ak4104_spi_write(codec, AK4104_REG_CHN_STATUS(0), val); + + val = 0; + + switch (params_rate(params)) { + case 44100: + val |= IEC958_AES3_CON_FS_44100; + break; + case 48000: + val |= IEC958_AES3_CON_FS_48000; + break; + case 32000: + val |= IEC958_AES3_CON_FS_32000; + break; + default: + dev_err(codec->dev, "unsupported sampling rate\n"); + return -EINVAL; + } + + return ak4104_spi_write(codec, AK4104_REG_CHN_STATUS(3), val); +} + +struct snd_soc_dai ak4104_dai = { + .name = DRV_NAME, + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_32000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S24_LE + }, + .ops = { + .hw_params = ak4104_hw_params, + .set_fmt = ak4104_set_dai_fmt, + } +}; + +static struct snd_soc_codec *ak4104_codec; + +static int ak4104_spi_probe(struct spi_device *spi) +{ + struct snd_soc_codec *codec; + struct ak4104_private *ak4104; + int ret, val; + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + ak4104 = kzalloc(sizeof(struct ak4104_private), GFP_KERNEL); + if (!ak4104) { + dev_err(&spi->dev, "could not allocate codec\n"); + return -ENOMEM; + } + + codec = &ak4104->codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->dev = &spi->dev; + codec->name = DRV_NAME; + codec->owner = THIS_MODULE; + codec->dai = &ak4104_dai; + codec->num_dai = 1; + codec->private_data = ak4104; + codec->control_data = spi; + codec->reg_cache = ak4104->reg_cache; + codec->reg_cache_size = AK4104_NUM_REGS; + + /* read all regs and fill the cache */ + ret = ak4104_fill_cache(codec); + if (ret < 0) { + dev_err(&spi->dev, "failed to fill register cache\n"); + return ret; + } + + /* read the 'reserved' register - according to the datasheet, it + * should contain 0x5b. Not a good way to verify the presence of + * the device, but there is no hardware ID register. */ + if (ak4104_read_reg_cache(codec, AK4104_REG_RESERVED) != + AK4104_RESERVED_VAL) { + ret = -ENODEV; + goto error_free_codec; + } + + /* set power-up and non-reset bits */ + val = ak4104_read_reg_cache(codec, AK4104_REG_CONTROL1); + val |= AK4104_CONTROL1_PW | AK4104_CONTROL1_RSTN; + ret = ak4104_spi_write(codec, AK4104_REG_CONTROL1, val); + if (ret < 0) + goto error_free_codec; + + /* enable transmitter */ + val = ak4104_read_reg_cache(codec, AK4104_REG_TX); + val |= AK4104_TX_TXE; + ret = ak4104_spi_write(codec, AK4104_REG_TX, val); + if (ret < 0) + goto error_free_codec; + + ak4104_codec = codec; + ret = snd_soc_register_dai(&ak4104_dai); + if (ret < 0) { + dev_err(&spi->dev, "failed to register DAI\n"); + goto error_free_codec; + } + + spi_set_drvdata(spi, ak4104); + dev_info(&spi->dev, "SPI device initialized\n"); + return 0; + +error_free_codec: + kfree(ak4104); + ak4104_dai.dev = NULL; + return ret; +} + +static int __devexit ak4104_spi_remove(struct spi_device *spi) +{ + int ret, val; + struct ak4104_private *ak4104 = spi_get_drvdata(spi); + + val = ak4104_read_reg_cache(&ak4104->codec, AK4104_REG_CONTROL1); + if (val < 0) + return val; + + /* clear power-up and non-reset bits */ + val &= ~(AK4104_CONTROL1_PW | AK4104_CONTROL1_RSTN); + ret = ak4104_spi_write(&ak4104->codec, AK4104_REG_CONTROL1, val); + if (ret < 0) + return ret; + + ak4104_codec = NULL; + kfree(ak4104); + return 0; +} + +static int ak4104_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = ak4104_codec; + int ret; + + /* Connect the codec to the socdev. snd_soc_new_pcms() needs this. */ + socdev->card->codec = codec; + + /* Register PCMs */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms\n"); + return ret; + } + + /* Register the socdev */ + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card\n"); + snd_soc_free_pcms(socdev); + return ret; + } + + return 0; +} + +static int ak4104_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + snd_soc_free_pcms(socdev); + return 0; +}; + +struct snd_soc_codec_device soc_codec_device_ak4104 = { + .probe = ak4104_probe, + .remove = ak4104_remove +}; +EXPORT_SYMBOL_GPL(soc_codec_device_ak4104); + +static struct spi_driver ak4104_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ak4104_spi_probe, + .remove = __devexit_p(ak4104_spi_remove), +}; + +static int __init ak4104_init(void) +{ + pr_info("Asahi Kasei AK4104 ALSA SoC Codec Driver\n"); + return spi_register_driver(&ak4104_spi_driver); +} +module_init(ak4104_init); + +static void __exit ak4104_exit(void) +{ + spi_unregister_driver(&ak4104_spi_driver); +} +module_exit(ak4104_exit); + +MODULE_AUTHOR("Daniel Mack "); +MODULE_DESCRIPTION("Asahi Kasei AK4104 ALSA SoC driver"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/codecs/ak4104.h b/sound/soc/codecs/ak4104.h new file mode 100644 index 000000000000..eb88fe7e4def --- /dev/null +++ b/sound/soc/codecs/ak4104.h @@ -0,0 +1,7 @@ +#ifndef _AK4104_H +#define _AK4104_H + +extern struct snd_soc_dai ak4104_dai; +extern struct snd_soc_codec_device soc_codec_device_ak4104; + +#endif -- cgit v1.2.3 From ed3da3d9a0ef13c6fe1414ec73c9c1be12747b62 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 3 Mar 2009 17:00:15 +0100 Subject: ALSA: Rewrite hw_ptr updaters Clean up and improve snd_pcm_update_hw_ptr*() functions. snd_pcm_update_hw_ptr() tries to detect the unexpected hwptr jumps more strictly to avoid the position mess-up, which often results in the bad quality I/O with pulseaudio. The hw-ptr skip error messages are printed when xrun proc is set to non-zero. Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 128 +++++++++++++++++++++++++++++++++------------------ 1 file changed, 83 insertions(+), 45 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 921691080f35..86ac9ae9460e 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -125,19 +125,27 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram } } +#ifdef CONFIG_SND_PCM_XRUN_DEBUG +#define xrun_debug(substream) ((substream)->pstr->xrun_debug) +#else +#define xrun_debug(substream) 0 +#endif + +#define dump_stack_on_xrun(substream) do { \ + if (xrun_debug(substream) > 1) \ + dump_stack(); \ + } while (0) + static void xrun(struct snd_pcm_substream *substream) { snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); -#ifdef CONFIG_SND_PCM_XRUN_DEBUG - if (substream->pstr->xrun_debug) { + if (xrun_debug(substream)) { snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n", substream->pcm->card->number, substream->pcm->device, substream->stream ? 'c' : 'p'); - if (substream->pstr->xrun_debug > 1) - dump_stack(); + dump_stack_on_xrun(substream); } -#endif } static inline snd_pcm_uframes_t snd_pcm_update_hw_ptr_pos(struct snd_pcm_substream *substream, @@ -182,11 +190,21 @@ static inline int snd_pcm_update_hw_ptr_post(struct snd_pcm_substream *substream return 0; } +#define hw_ptr_error(substream, fmt, args...) \ + do { \ + if (xrun_debug(substream)) { \ + if (printk_ratelimit()) { \ + snd_printd("hda_codec: " fmt, ##args); \ + } \ + dump_stack_on_xrun(substream); \ + } \ + } while (0) + static inline int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; snd_pcm_uframes_t pos; - snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt; + snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base; snd_pcm_sframes_t delta; pos = snd_pcm_update_hw_ptr_pos(substream, runtime); @@ -194,36 +212,47 @@ static inline int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *subs xrun(substream); return -EPIPE; } - if (runtime->period_size == runtime->buffer_size) - goto __next_buf; - new_hw_ptr = runtime->hw_ptr_base + pos; + hw_base = runtime->hw_ptr_base; + new_hw_ptr = hw_base + pos; hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size; - - delta = hw_ptr_interrupt - new_hw_ptr; - if (delta > 0) { - if ((snd_pcm_uframes_t)delta < runtime->buffer_size / 2) { -#ifdef CONFIG_SND_PCM_XRUN_DEBUG - if (runtime->periods > 1 && substream->pstr->xrun_debug) { - snd_printd(KERN_ERR "Unexpected hw_pointer value [1] (stream = %i, delta: -%ld, max jitter = %ld): wrong interrupt acknowledge?\n", substream->stream, (long) delta, runtime->buffer_size / 2); - if (substream->pstr->xrun_debug > 1) - dump_stack(); - } -#endif - return 0; + delta = new_hw_ptr - hw_ptr_interrupt; + if (hw_ptr_interrupt == runtime->boundary) + hw_ptr_interrupt = 0; + if (delta < 0) { + delta += runtime->buffer_size; + if (delta < 0) { + hw_ptr_error(substream, + "Unexpected hw_pointer value " + "(stream=%i, pos=%ld, intr_ptr=%ld)\n", + substream->stream, (long)pos, + (long)hw_ptr_interrupt); + /* rebase to interrupt position */ + hw_base = new_hw_ptr = hw_ptr_interrupt; + delta = 0; + } else { + hw_base += runtime->buffer_size; + if (hw_base == runtime->boundary) + hw_base = 0; + new_hw_ptr = hw_base + pos; } - __next_buf: - runtime->hw_ptr_base += runtime->buffer_size; - if (runtime->hw_ptr_base == runtime->boundary) - runtime->hw_ptr_base = 0; - new_hw_ptr = runtime->hw_ptr_base + pos; } - + if (delta > runtime->period_size) { + hw_ptr_error(substream, + "Lost interrupts? " + "(stream=%i, delta=%ld, intr_ptr=%ld)\n", + substream->stream, (long)delta, + (long)hw_ptr_interrupt); + /* rebase hw_ptr_interrupt */ + hw_ptr_interrupt = + new_hw_ptr - new_hw_ptr % runtime->period_size; + } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) snd_pcm_playback_silence(substream, new_hw_ptr); + runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; - runtime->hw_ptr_interrupt = new_hw_ptr - new_hw_ptr % runtime->period_size; + runtime->hw_ptr_interrupt = hw_ptr_interrupt; return snd_pcm_update_hw_ptr_post(substream, runtime); } @@ -233,7 +262,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; snd_pcm_uframes_t pos; - snd_pcm_uframes_t old_hw_ptr, new_hw_ptr; + snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base; snd_pcm_sframes_t delta; old_hw_ptr = runtime->status->hw_ptr; @@ -242,29 +271,38 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) xrun(substream); return -EPIPE; } - new_hw_ptr = runtime->hw_ptr_base + pos; - - delta = old_hw_ptr - new_hw_ptr; - if (delta > 0) { - if ((snd_pcm_uframes_t)delta < runtime->buffer_size / 2) { -#ifdef CONFIG_SND_PCM_XRUN_DEBUG - if (runtime->periods > 2 && substream->pstr->xrun_debug) { - snd_printd(KERN_ERR "Unexpected hw_pointer value [2] (stream = %i, delta: -%ld, max jitter = %ld): wrong interrupt acknowledge?\n", substream->stream, (long) delta, runtime->buffer_size / 2); - if (substream->pstr->xrun_debug > 1) - dump_stack(); - } -#endif + hw_base = runtime->hw_ptr_base; + new_hw_ptr = hw_base + pos; + + delta = new_hw_ptr - old_hw_ptr; + if (delta < 0) { + delta += runtime->buffer_size; + if (delta < 0) { + hw_ptr_error(substream, + "Unexpected hw_pointer value [2] " + "(stream=%i, pos=%ld, old_ptr=%ld)\n", + substream->stream, (long)pos, + (long)old_hw_ptr); return 0; } - runtime->hw_ptr_base += runtime->buffer_size; - if (runtime->hw_ptr_base == runtime->boundary) - runtime->hw_ptr_base = 0; - new_hw_ptr = runtime->hw_ptr_base + pos; + hw_base += runtime->buffer_size; + if (hw_base == runtime->boundary) + hw_base = 0; + new_hw_ptr = hw_base + pos; + } + if (delta > runtime->period_size && runtime->periods > 1) { + hw_ptr_error(substream, + "hw_ptr skipping! " + "(pos=%ld, delta=%ld, period=%ld)\n", + (long)pos, (long)delta, + (long)runtime->period_size); + return 0; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) snd_pcm_playback_silence(substream, new_hw_ptr); + runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; return snd_pcm_update_hw_ptr_post(substream, runtime); -- cgit v1.2.3 From 85122ea40c4fc82af5b66b8683f525c2c4a36d1a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 6 Mar 2009 16:30:07 +0100 Subject: ALSA: Remove unneeded snd_pcm_substream.timer_lock The timer callbacks are called in the protected status by the lock of the timer instance, so there is no need for an extra lock in the PCM substream. Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 1 - sound/core/pcm.c | 1 - sound/core/pcm_timer.c | 6 ------ 3 files changed, 8 deletions(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 40c5a6fa6bcd..e4f60076e6c4 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -364,7 +364,6 @@ struct snd_pcm_substream { /* -- timer section -- */ struct snd_timer *timer; /* timer */ unsigned timer_running: 1; /* time is running */ - spinlock_t timer_lock; /* -- next substream -- */ struct snd_pcm_substream *next; /* -- linked substreams -- */ diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 192a433a2403..37f567a68ef2 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -667,7 +667,6 @@ int snd_pcm_new_stream(struct snd_pcm *pcm, int stream, int substream_count) spin_lock_init(&substream->self_group.lock); INIT_LIST_HEAD(&substream->self_group.substreams); list_add_tail(&substream->link_list, &substream->self_group.substreams); - spin_lock_init(&substream->timer_lock); atomic_set(&substream->mmap_count, 0); prev = substream; } diff --git a/sound/core/pcm_timer.c b/sound/core/pcm_timer.c index 2c89c04f2916..ca8068b63d6c 100644 --- a/sound/core/pcm_timer.c +++ b/sound/core/pcm_timer.c @@ -85,25 +85,19 @@ static unsigned long snd_pcm_timer_resolution(struct snd_timer * timer) static int snd_pcm_timer_start(struct snd_timer * timer) { - unsigned long flags; struct snd_pcm_substream *substream; substream = snd_timer_chip(timer); - spin_lock_irqsave(&substream->timer_lock, flags); substream->timer_running = 1; - spin_unlock_irqrestore(&substream->timer_lock, flags); return 0; } static int snd_pcm_timer_stop(struct snd_timer * timer) { - unsigned long flags; struct snd_pcm_substream *substream; substream = snd_timer_chip(timer); - spin_lock_irqsave(&substream->timer_lock, flags); substream->timer_running = 0; - spin_unlock_irqrestore(&substream->timer_lock, flags); return 0; } -- cgit v1.2.3 From f5b1db634280ecaf3147ee996f26aad0ed4828c4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 16 Jan 2009 18:15:22 +0100 Subject: ALSA: add snd_ctl_add_slave_uncached() Added snd_ctl_add_slave_uncached() function to add a slave element with volatile controls. The values of normal slave elements are supposed to be cachable, i.e. they are changed only via the put callbacks. OTOH, when a slave element is volatile and its values may be changed by other reason (e.g. hardware status change), the values will get inconsistent. The new function allows the slave elements with volatile changes. When the slave is tied with this call, the native get callback is issued at each time so that the values are always updated. Signed-off-by: Takashi Iwai --- include/sound/control.h | 20 ++++++++++++++++++-- sound/core/vmaster.c | 46 +++++++++++++++++++++++++++++----------------- 2 files changed, 47 insertions(+), 19 deletions(-) diff --git a/include/sound/control.h b/include/sound/control.h index 4721b4bba053..4cf8f7aaa13f 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -171,6 +171,22 @@ int snd_ctl_boolean_stereo_info(struct snd_kcontrol *kcontrol, */ struct snd_kcontrol *snd_ctl_make_virtual_master(char *name, const unsigned int *tlv); -int snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave); - +int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave, + unsigned int flags); +/* optional flags for slave */ +#define SND_CTL_SLAVE_NEED_UPDATE (1 << 0) + +static inline int +snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave) +{ + return _snd_ctl_add_slave(master, slave, 0); +} + +static inline int +snd_ctl_add_slave_uncached(struct snd_kcontrol *master, + struct snd_kcontrol *slave) +{ + return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE); +} + #endif /* __SOUND_CONTROL_H */ diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c index 4cc57f902e2c..d51b198d06d9 100644 --- a/sound/core/vmaster.c +++ b/sound/core/vmaster.c @@ -50,18 +50,38 @@ struct link_slave { struct link_master *master; struct link_ctl_info info; int vals[2]; /* current values */ + unsigned int flags; struct snd_kcontrol slave; /* the copy of original control entry */ }; +static int slave_update(struct link_slave *slave) +{ + struct snd_ctl_elem_value *uctl; + int err, ch; + + uctl = kmalloc(sizeof(*uctl), GFP_KERNEL); + if (!uctl) + return -ENOMEM; + uctl->id = slave->slave.id; + err = slave->slave.get(&slave->slave, uctl); + for (ch = 0; ch < slave->info.count; ch++) + slave->vals[ch] = uctl->value.integer.value[ch]; + kfree(uctl); + return 0; +} + /* get the slave ctl info and save the initial values */ static int slave_init(struct link_slave *slave) { struct snd_ctl_elem_info *uinfo; - struct snd_ctl_elem_value *uctl; - int err, ch; + int err; - if (slave->info.count) - return 0; /* already initialized */ + if (slave->info.count) { + /* already initialized */ + if (slave->flags & SND_CTL_SLAVE_NEED_UPDATE) + return slave_update(slave); + return 0; + } uinfo = kmalloc(sizeof(*uinfo), GFP_KERNEL); if (!uinfo) @@ -85,15 +105,7 @@ static int slave_init(struct link_slave *slave) slave->info.max_val = uinfo->value.integer.max; kfree(uinfo); - uctl = kmalloc(sizeof(*uctl), GFP_KERNEL); - if (!uctl) - return -ENOMEM; - uctl->id = slave->slave.id; - err = slave->slave.get(&slave->slave, uctl); - for (ch = 0; ch < slave->info.count; ch++) - slave->vals[ch] = uctl->value.integer.value[ch]; - kfree(uctl); - return 0; + return slave_update(slave); } /* initialize master volume */ @@ -229,7 +241,8 @@ static void slave_free(struct snd_kcontrol *kcontrol) * - logarithmic volume control (dB level), no linear volume * - master can only attenuate the volume, no gain */ -int snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave) +int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave, + unsigned int flags) { struct link_master *master_link = snd_kcontrol_chip(master); struct link_slave *srec; @@ -241,6 +254,7 @@ int snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave) srec->slave = *slave; memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd)); srec->master = master_link; + srec->flags = flags; /* override callbacks */ slave->info = slave_info; @@ -254,8 +268,7 @@ int snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave) list_add_tail(&srec->list, &master_link->slaves); return 0; } - -EXPORT_SYMBOL(snd_ctl_add_slave); +EXPORT_SYMBOL(_snd_ctl_add_slave); /* * ctl callbacks for master controls @@ -367,5 +380,4 @@ struct snd_kcontrol *snd_ctl_make_virtual_master(char *name, return kctl; } - EXPORT_SYMBOL(snd_ctl_make_virtual_master); -- cgit v1.2.3 From b0a8a8fd1b3bd6fbbb4b599191b859d41e12a002 Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 20 Jan 2009 22:01:13 +0200 Subject: ALSA: powermac - Correct HP detection and input selectors for PMac 5500 Correct headphone detection and input selectors for PowerMac 5500 (AWACS). Signed-off-by: Risto Suominen Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 7bd33e6552ab..0258ccb8f431 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -767,6 +767,7 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) #endif /* CONFIG_PM */ #define IS_PM7500 (machine_is_compatible("AAPL,7500")) +#define IS_PM5500 (machine_is_compatible("AAPL,e411")) #define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) #define IS_IMAC1 (machine_is_compatible("PowerMac2,1")) #define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \ @@ -858,6 +859,7 @@ int __init snd_pmac_awacs_init(struct snd_pmac *chip) { int pm7500 = IS_PM7500; + int pm5500 = IS_PM5500; int beige = IS_BEIGE; int g4agp = IS_G4AGP; int imac; @@ -915,7 +917,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) /* set headphone-jack detection bit */ switch (chip->model) { case PMAC_AWACS: - chip->hp_stat_mask = pm7500 ? MASK_HDPCONN + chip->hp_stat_mask = pm7500 || pm5500 ? MASK_HDPCONN : MASK_LOCONN; break; case PMAC_SCREAMER: @@ -954,7 +956,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) return err; if (beige || g4agp) ; - else if (chip->model == PMAC_SCREAMER) + else if (chip->model == PMAC_SCREAMER || pm5500) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2), snd_pmac_screamer_mixers2); else if (!pm7500) -- cgit v1.2.3 From 573934bc038b0f47d17a5608e74b79dcd7c191ea Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 20 Jan 2009 22:01:14 +0200 Subject: ALSA: powermac - Correct volume controls for PowerBook G3 Lombard Correct volume controls for PowerBook G3 Lombard (Screamer). Signed-off-by: Risto Suominen Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 0258ccb8f431..d89c23e135dc 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -773,6 +773,7 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) #define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1")) #define IS_G4AGP (machine_is_compatible("PowerMac3,1")) +#define IS_LOMBARD (machine_is_compatible("PowerBook1,1")) static int imac1, imac2; @@ -862,6 +863,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) int pm5500 = IS_PM5500; int beige = IS_BEIGE; int g4agp = IS_G4AGP; + int lombard = IS_LOMBARD; int imac; int err, vol; @@ -972,7 +974,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_beige), snd_pmac_screamer_mixers_beige); - else if (imac) + else if (imac || lombard) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_imac), snd_pmac_screamer_mixers_imac); @@ -986,7 +988,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) snd_pmac_awacs_mixers_pmac); if (err < 0) return err; - chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp) + chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp || lombard) ? &snd_pmac_awacs_master_sw_imac : &snd_pmac_awacs_master_sw, chip); err = snd_ctl_add(chip->card, chip->master_sw_ctl); -- cgit v1.2.3 From 4d9e93b1adf2923c0a0cbc545d6e78dec3334faf Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 20 Jan 2009 22:01:15 +0200 Subject: ALSA: powermac - Correct volume controls and HP detection for PMac 8500/9500 Correct volume controls and headphone detection for PowerMac 8500/9500 (AWACS). Signed-off-by: Risto Suominen Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index d89c23e135dc..9abbf645eb67 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -766,7 +766,9 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) } #endif /* CONFIG_PM */ -#define IS_PM7500 (machine_is_compatible("AAPL,7500")) +#define IS_PM7500 (machine_is_compatible("AAPL,7500") \ + || machine_is_compatible("AAPL,8500") \ + || machine_is_compatible("AAPL,9500")) #define IS_PM5500 (machine_is_compatible("AAPL,e411")) #define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) #define IS_IMAC1 (machine_is_compatible("PowerMac2,1")) -- cgit v1.2.3 From ed336d3404a8fdeda1e3f1c189b5f83186675448 Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 20 Jan 2009 22:01:16 +0200 Subject: ALSA: powermac - Allow input from mic in iBook G3 Dual-USB Allow input from microphone on iBook G3 Dual-USB (Tumbler). Signed-off-by: Risto Suominen Signed-off-by: Takashi Iwai --- sound/ppc/pmac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index af76ee862d27..bd8f92b1c224 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -1033,7 +1033,8 @@ static int __init snd_pmac_detect(struct snd_pmac *chip) } if (of_device_is_compatible(sound, "tumbler")) { chip->model = PMAC_TUMBLER; - chip->can_capture = machine_is_compatible("PowerMac4,2"); + chip->can_capture = machine_is_compatible("PowerMac4,2") + || machine_is_compatible("PowerBook4,1"); chip->can_duplex = 0; // chip->can_byte_swap = 0; /* FIXME: check this */ chip->num_freqs = ARRAY_SIZE(tumbler_freqs); -- cgit v1.2.3 From dca7c74172fee0cf6ee1e303df093c31b5561039 Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Tue, 20 Jan 2009 22:01:17 +0200 Subject: ALSA: Add vmaster controls for Pmac 5500, iMac G3 SL, and PBook G3 Lombard Add virtual master controls for PowerMac 5500 (AWACS) and iMac G3 Slot-loading and PowerBook G3 Lombard (Screamer). Signed-off-by: Risto Suominen Signed-off-by: Takashi Iwai --- sound/ppc/Kconfig | 1 + sound/ppc/awacs.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 69 insertions(+), 6 deletions(-) diff --git a/sound/ppc/Kconfig b/sound/ppc/Kconfig index 777de2b17178..bd2338ab2ced 100644 --- a/sound/ppc/Kconfig +++ b/sound/ppc/Kconfig @@ -13,6 +13,7 @@ config SND_POWERMAC tristate "PowerMac (AWACS, DACA, Burgundy, Tumbler, Keywest)" depends on I2C && INPUT && PPC_PMAC select SND_PCM + select SND_VMASTER help Say Y here to include support for the integrated sound device. diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 9abbf645eb67..80df9b1f651e 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -608,9 +608,12 @@ static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __initdata = { AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_LINE, 0), }; -static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = { +static struct snd_kcontrol_new snd_pmac_screamer_mixers_lo[] __initdata = { AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), - AWACS_VOLUME("Master Playback Volume", 5, 6, 1), +}; + +static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = { + AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; @@ -627,6 +630,10 @@ static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = { AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), }; +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac5500[] __initdata = { + AWACS_VOLUME("Headphone Playback Volume", 2, 6, 1), +}; + static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = { AWACS_VOLUME("Master Playback Volume", 2, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), @@ -645,12 +652,19 @@ static struct snd_kcontrol_new snd_pmac_screamer_mixers2[] __initdata = { AWACS_SWITCH("Mic Capture Switch", 0, SHIFT_MUX_LINE, 0), }; +static struct snd_kcontrol_new snd_pmac_awacs_mixers2_pmac5500[] __initdata = { + AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), +}; + static struct snd_kcontrol_new snd_pmac_awacs_master_sw __initdata = AWACS_SWITCH("Master Playback Switch", 1, SHIFT_HDMUTE, 1); static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __initdata = AWACS_SWITCH("Line out Playback Switch", 1, SHIFT_HDMUTE, 1); +static struct snd_kcontrol_new snd_pmac_awacs_master_sw_pmac5500 __initdata = +AWACS_SWITCH("Headphone Playback Switch", 1, SHIFT_HDMUTE, 1); + static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __initdata = { AWACS_SWITCH("Mic Boost Capture Switch", 0, SHIFT_GAINLINE, 0), }; @@ -868,6 +882,8 @@ snd_pmac_awacs_init(struct snd_pmac *chip) int lombard = IS_LOMBARD; int imac; int err, vol; + struct snd_kcontrol *vmaster_sw, *vmaster_vol; + struct snd_kcontrol *master_vol, *speaker_vol; imac1 = IS_IMAC1; imac2 = IS_IMAC2; @@ -968,19 +984,35 @@ snd_pmac_awacs_init(struct snd_pmac *chip) snd_pmac_awacs_mixers2); if (err < 0) return err; + if (pm5500) { + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_mixers2_pmac5500), + snd_pmac_awacs_mixers2_pmac5500); + if (err < 0) + return err; + } if (pm7500) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_mixers_pmac7500), snd_pmac_awacs_mixers_pmac7500); + else if (pm5500) + err = snd_ctl_add(chip->card, + (master_vol = snd_ctl_new1(snd_pmac_awacs_mixers_pmac5500, + chip))); else if (beige) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_beige), snd_pmac_screamer_mixers_beige); - else if (imac || lombard) + else if (imac || lombard) { + err = snd_ctl_add(chip->card, + (master_vol = snd_ctl_new1(snd_pmac_screamer_mixers_lo, + chip))); + if (err < 0) + return err; err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_imac), snd_pmac_screamer_mixers_imac); - else if (g4agp) + } else if (g4agp) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_g4agp), snd_pmac_screamer_mixers_g4agp); @@ -992,6 +1024,8 @@ snd_pmac_awacs_init(struct snd_pmac *chip) return err; chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp || lombard) ? &snd_pmac_awacs_master_sw_imac + : pm5500 + ? &snd_pmac_awacs_master_sw_pmac5500 : &snd_pmac_awacs_master_sw, chip); err = snd_ctl_add(chip->card, chip->master_sw_ctl); if (err < 0) @@ -1023,8 +1057,9 @@ snd_pmac_awacs_init(struct snd_pmac *chip) #endif /* PMAC_AMP_AVAIL */ { /* route A = headphone, route C = speaker */ - err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_speaker_vol), - snd_pmac_awacs_speaker_vol); + err = snd_ctl_add(chip->card, + (speaker_vol = snd_ctl_new1(snd_pmac_awacs_speaker_vol, + chip))); if (err < 0) return err; chip->speaker_sw_ctl = snd_ctl_new1(imac1 @@ -1037,6 +1072,33 @@ snd_pmac_awacs_init(struct snd_pmac *chip) return err; } + if (pm5500 || imac || lombard) { + vmaster_sw = snd_ctl_make_virtual_master( + "Master Playback Switch", (unsigned int *) NULL); + err = snd_ctl_add_slave_uncached(vmaster_sw, + chip->master_sw_ctl); + if (err < 0) + return err; + err = snd_ctl_add_slave_uncached(vmaster_sw, + chip->speaker_sw_ctl); + if (err < 0) + return err; + err = snd_ctl_add(chip->card, vmaster_sw); + if (err < 0) + return err; + vmaster_vol = snd_ctl_make_virtual_master( + "Master Playback Volume", (unsigned int *) NULL); + err = snd_ctl_add_slave(vmaster_vol, master_vol); + if (err < 0) + return err; + err = snd_ctl_add_slave(vmaster_vol, speaker_vol); + if (err < 0) + return err; + err = snd_ctl_add(chip->card, vmaster_vol); + if (err < 0) + return err; + } + if (beige || g4agp) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mic_boost_beige), -- cgit v1.2.3 From 6da6711385165eff76411b77974eec13c5ef6486 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 5 Feb 2009 16:02:46 +0100 Subject: ALSA: powermac - Add missing KERN_* prefix to printk Signed-off-by: Takashi Iwai --- sound/ppc/daca.c | 2 +- sound/ppc/pmac.c | 8 ++++---- sound/ppc/powermac.c | 2 +- sound/ppc/tumbler.c | 13 +++++++------ 4 files changed, 13 insertions(+), 12 deletions(-) diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c index 8a5b29031933..f8d478c2da62 100644 --- a/sound/ppc/daca.c +++ b/sound/ppc/daca.c @@ -82,7 +82,7 @@ static int daca_set_volume(struct pmac_daca *mix) data[1] |= mix->deemphasis ? 0x40 : 0; if (i2c_smbus_write_block_data(mix->i2c.client, DACA_REG_AVOL, 2, data) < 0) { - snd_printk("failed to set volume \n"); + snd_printk(KERN_ERR "failed to set volume \n"); return -EINVAL; } return 0; diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index bd8f92b1c224..9b4e9c316695 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -299,7 +299,7 @@ static int snd_pmac_pcm_trigger(struct snd_pmac *chip, struct pmac_stream *rec, case SNDRV_PCM_TRIGGER_SUSPEND: spin_lock(&chip->reg_lock); rec->running = 0; - /*printk("stopped!!\n");*/ + /*printk(KERN_DEBUG "stopped!!\n");*/ snd_pmac_dma_stop(rec); for (i = 0, cp = rec->cmd.cmds; i < rec->nperiods; i++, cp++) out_le16(&cp->command, DBDMA_STOP); @@ -334,7 +334,7 @@ static snd_pcm_uframes_t snd_pmac_pcm_pointer(struct snd_pmac *chip, } #endif count += rec->cur_period * rec->period_size; - /*printk("pointer=%d\n", count);*/ + /*printk(KERN_DEBUG "pointer=%d\n", count);*/ return bytes_to_frames(subs->runtime, count); } @@ -486,7 +486,7 @@ static void snd_pmac_pcm_update(struct snd_pmac *chip, struct pmac_stream *rec) if (! (stat & ACTIVE)) break; - /*printk("update frag %d\n", rec->cur_period);*/ + /*printk(KERN_DEBUG "update frag %d\n", rec->cur_period);*/ st_le16(&cp->xfer_status, 0); st_le16(&cp->req_count, rec->period_size); /*st_le16(&cp->res_count, 0);*/ @@ -806,7 +806,7 @@ snd_pmac_ctrl_intr(int irq, void *devid) struct snd_pmac *chip = devid; int ctrl = in_le32(&chip->awacs->control); - /*printk("pmac: control interrupt.. 0x%x\n", ctrl);*/ + /*printk(KERN_DEBUG "pmac: control interrupt.. 0x%x\n", ctrl);*/ if (ctrl & MASK_PORTCHG) { /* do something when headphone is plugged/unplugged? */ if (chip->update_automute) diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c index c936225771ba..e9b02d974350 100644 --- a/sound/ppc/powermac.c +++ b/sound/ppc/powermac.c @@ -110,7 +110,7 @@ static int __init snd_pmac_probe(struct platform_device *devptr) goto __error; break; default: - snd_printk("unsupported hardware %d\n", chip->model); + snd_printk(KERN_ERR "unsupported hardware %d\n", chip->model); err = -EINVAL; goto __error; } diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index 3eb223385416..40222fcc0878 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -41,7 +41,7 @@ #undef DEBUG #ifdef DEBUG -#define DBG(fmt...) printk(fmt) +#define DBG(fmt...) printk(KERN_DEBUG fmt) #else #define DBG(fmt...) #endif @@ -240,7 +240,7 @@ static int tumbler_set_master_volume(struct pmac_tumbler *mix) if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_VOL, 6, block) < 0) { - snd_printk("failed to set volume \n"); + snd_printk(KERN_ERR "failed to set volume \n"); return -EINVAL; } return 0; @@ -350,7 +350,7 @@ static int tumbler_set_drc(struct pmac_tumbler *mix) if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC, 2, val) < 0) { - snd_printk("failed to set DRC\n"); + snd_printk(KERN_ERR "failed to set DRC\n"); return -EINVAL; } return 0; @@ -386,7 +386,7 @@ static int snapper_set_drc(struct pmac_tumbler *mix) if (i2c_smbus_write_i2c_block_data(mix->i2c.client, TAS_REG_DRC, 6, val) < 0) { - snd_printk("failed to set DRC\n"); + snd_printk(KERN_ERR "failed to set DRC\n"); return -EINVAL; } return 0; @@ -506,7 +506,8 @@ static int tumbler_set_mono_volume(struct pmac_tumbler *mix, block[i] = (vol >> ((info->bytes - i - 1) * 8)) & 0xff; if (i2c_smbus_write_i2c_block_data(mix->i2c.client, info->reg, info->bytes, block) < 0) { - snd_printk("failed to set mono volume %d\n", info->index); + snd_printk(KERN_ERR "failed to set mono volume %d\n", + info->index); return -EINVAL; } return 0; @@ -643,7 +644,7 @@ static int snapper_set_mix_vol1(struct pmac_tumbler *mix, int idx, int ch, int r } if (i2c_smbus_write_i2c_block_data(mix->i2c.client, reg, 9, block) < 0) { - snd_printk("failed to set mono volume %d\n", reg); + snd_printk(KERN_ERR "failed to set mono volume %d\n", reg); return -EINVAL; } return 0; -- cgit v1.2.3 From 39661758631da37efbc961e57a4ddefad573cc52 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 25 Feb 2009 13:40:26 +0100 Subject: ALSA: snd-powermac: timeout reaches -1 If unsuccessful, timeout reaches -1 after the loop. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/ppc/burgundy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c index f860d39af36b..45a76297c38d 100644 --- a/sound/ppc/burgundy.c +++ b/sound/ppc/burgundy.c @@ -35,7 +35,7 @@ snd_pmac_burgundy_busy_wait(struct snd_pmac *chip) int timeout = 50; while ((in_le32(&chip->awacs->codec_ctrl) & MASK_NEWECMD) && timeout--) udelay(1); - if (! timeout) + if (timeout < 0) printk(KERN_DEBUG "burgundy_busy_wait: timeout\n"); } -- cgit v1.2.3 From 79c7cdd5441f5d3900c1632adcc8cd2bee35c8da Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Feb 2009 14:47:19 +0100 Subject: ALSA: Add kernel-doc comments to vmaster stuff Signed-off-by: Takashi Iwai --- .../sound/alsa/DocBook/alsa-driver-api.tmpl | 4 +++ include/sound/control.h | 32 ++++++++++++++++++++++ sound/core/vmaster.c | 16 +++++++++-- 3 files changed, 50 insertions(+), 2 deletions(-) diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl index 9d644f7e241e..115962827c81 100644 --- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl +++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl @@ -71,6 +71,10 @@ !Esound/pci/ac97/ac97_codec.c !Esound/pci/ac97/ac97_pcm.c + Virtual Master Control API +!Esound/core/vmaster.c +!Iinclude/sound/control.h + MIDI API Raw MIDI API diff --git a/include/sound/control.h b/include/sound/control.h index 4cf8f7aaa13f..ef96f07aa03b 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -176,12 +176,44 @@ int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave, /* optional flags for slave */ #define SND_CTL_SLAVE_NEED_UPDATE (1 << 0) +/** + * snd_ctl_add_slave - Add a virtual slave control + * @master: vmaster element + * @slave: slave element to add + * + * Add a virtual slave control to the given master element created via + * snd_ctl_create_virtual_master() beforehand. + * Returns zero if successful or a negative error code. + * + * All slaves must be the same type (returning the same information + * via info callback). The fucntion doesn't check it, so it's your + * responsibility. + * + * Also, some additional limitations: + * at most two channels, + * logarithmic volume control (dB level) thus no linear volume, + * master can only attenuate the volume without gain + */ static inline int snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave) { return _snd_ctl_add_slave(master, slave, 0); } +/** + * snd_ctl_add_slave_uncached - Add a virtual slave control + * @master: vmaster element + * @slave: slave element to add + * + * Add a virtual slave control to the given master. + * Unlike snd_ctl_add_slave(), the element added via this function + * is supposed to have volatile values, and get callback is called + * at each time quried from the master. + * + * When the control peeks the hardware values directly and the value + * can be changed by other means than the put callback of the element, + * this function should be used to keep the value always up-to-date. + */ static inline int snd_ctl_add_slave_uncached(struct snd_kcontrol *master, struct snd_kcontrol *slave) diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c index d51b198d06d9..257624bd1997 100644 --- a/sound/core/vmaster.c +++ b/sound/core/vmaster.c @@ -340,8 +340,20 @@ static void master_free(struct snd_kcontrol *kcontrol) } -/* - * Create a virtual master control with the given name +/** + * snd_ctl_make_virtual_master - Create a virtual master control + * @name: name string of the control element to create + * @tlv: optional TLV int array for dB information + * + * Creates a virtual matster control with the given name string. + * Returns the created control element, or NULL for errors (ENOMEM). + * + * After creating a vmaster element, you can add the slave controls + * via snd_ctl_add_slave() or snd_ctl_add_slave_uncached(). + * + * The optional argument @tlv can be used to specify the TLV information + * for dB scale of the master control. It should be a single element + * with #SNDRV_CTL_TLVT_DB_SCALE type, and should be the max 0dB. */ struct snd_kcontrol *snd_ctl_make_virtual_master(char *name, const unsigned int *tlv) -- cgit v1.2.3 From 662c319ae4b4fb60001816dfe1dde5fdfc7a2af9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Feb 2009 08:53:50 +0100 Subject: ALSA: Add sound/core/jack.c to driver-API docbook entry Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl index 9d644f7e241e..37b006cdf2f9 100644 --- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl +++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl @@ -88,6 +88,9 @@ Miscellaneous Functions Hardware-Dependent Devices API !Esound/core/hwdep.c + + Jack Abstraction Layer API +!Esound/core/jack.c ISA DMA Helpers !Esound/core/isadma.c -- cgit v1.2.3 From 118dd6bfe7e0cddc8ab417ead19cc76000e92773 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Feb 2009 16:35:21 +0100 Subject: ALSA: Clean up snd_monitor_file management Use the standard linked list for snd_monitor_file management. Also, move the list deletion of shutdown_list element into snd_disconnect_release() (for simplification). Signed-off-by: Takashi Iwai --- include/sound/core.h | 6 +++--- sound/core/init.c | 42 +++++++++++++++--------------------------- 2 files changed, 18 insertions(+), 30 deletions(-) diff --git a/include/sound/core.h b/include/sound/core.h index f632484bc743..bd4529e0c27e 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -97,9 +97,9 @@ struct snd_device { struct snd_monitor_file { struct file *file; - struct snd_monitor_file *next; const struct file_operations *disconnected_f_op; - struct list_head shutdown_list; + struct list_head shutdown_list; /* still need to shutdown */ + struct list_head list; /* link of monitor files */ }; /* main structure for soundcard */ @@ -134,7 +134,7 @@ struct snd_card { struct snd_info_entry *proc_id; /* the card id */ struct proc_dir_entry *proc_root_link; /* number link to real id */ - struct snd_monitor_file *files; /* all files associated to this card */ + struct list_head files_list; /* all files associated to this card */ struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown state */ spinlock_t files_lock; /* lock the files for this card */ diff --git a/sound/core/init.c b/sound/core/init.c index 0d5520c415d3..05c6da554cbf 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -195,6 +195,7 @@ struct snd_card *snd_card_new(int idx, const char *xid, INIT_LIST_HEAD(&card->controls); INIT_LIST_HEAD(&card->ctl_files); spin_lock_init(&card->files_lock); + INIT_LIST_HEAD(&card->files_list); init_waitqueue_head(&card->shutdown_sleep); #ifdef CONFIG_PM mutex_init(&card->power_lock); @@ -259,6 +260,7 @@ static int snd_disconnect_release(struct inode *inode, struct file *file) list_for_each_entry(_df, &shutdown_files, shutdown_list) { if (_df->file == file) { df = _df; + list_del_init(&df->shutdown_list); break; } } @@ -347,8 +349,7 @@ int snd_card_disconnect(struct snd_card *card) /* phase 2: replace file->f_op with special dummy operations */ spin_lock(&card->files_lock); - mfile = card->files; - while (mfile) { + list_for_each_entry(mfile, &card->files_list, list) { file = mfile->file; /* it's critical part, use endless loop */ @@ -361,8 +362,6 @@ int snd_card_disconnect(struct snd_card *card) mfile->file->f_op = &snd_shutdown_f_ops; fops_get(mfile->file->f_op); - - mfile = mfile->next; } spin_unlock(&card->files_lock); @@ -442,7 +441,7 @@ int snd_card_free_when_closed(struct snd_card *card) return ret; spin_lock(&card->files_lock); - if (card->files == NULL) + if (list_empty(&card->files_list)) free_now = 1; else card->free_on_last_close = 1; @@ -462,7 +461,7 @@ int snd_card_free(struct snd_card *card) return ret; /* wait, until all devices are ready for the free operation */ - wait_event(card->shutdown_sleep, card->files == NULL); + wait_event(card->shutdown_sleep, list_empty(&card->files_list)); snd_card_do_free(card); return 0; } @@ -809,15 +808,13 @@ int snd_card_file_add(struct snd_card *card, struct file *file) return -ENOMEM; mfile->file = file; mfile->disconnected_f_op = NULL; - mfile->next = NULL; spin_lock(&card->files_lock); if (card->shutdown) { spin_unlock(&card->files_lock); kfree(mfile); return -ENODEV; } - mfile->next = card->files; - card->files = mfile; + list_add(&mfile->list, &card->files_list); spin_unlock(&card->files_lock); return 0; } @@ -839,29 +836,20 @@ EXPORT_SYMBOL(snd_card_file_add); */ int snd_card_file_remove(struct snd_card *card, struct file *file) { - struct snd_monitor_file *mfile, *pfile = NULL; + struct snd_monitor_file *mfile, *found = NULL; int last_close = 0; spin_lock(&card->files_lock); - mfile = card->files; - while (mfile) { + list_for_each_entry(mfile, &card->files_list, list) { if (mfile->file == file) { - if (pfile) - pfile->next = mfile->next; - else - card->files = mfile->next; + list_del(&mfile->list); + if (mfile->disconnected_f_op) + fops_put(mfile->disconnected_f_op); + found = mfile; break; } - pfile = mfile; - mfile = mfile->next; - } - if (mfile && mfile->disconnected_f_op) { - fops_put(mfile->disconnected_f_op); - spin_lock(&shutdown_lock); - list_del(&mfile->shutdown_list); - spin_unlock(&shutdown_lock); } - if (card->files == NULL) + if (list_empty(&card->files_list)) last_close = 1; spin_unlock(&card->files_lock); if (last_close) { @@ -869,11 +857,11 @@ int snd_card_file_remove(struct snd_card *card, struct file *file) if (card->free_on_last_close) snd_card_do_free(card); } - if (!mfile) { + if (!found) { snd_printk(KERN_ERR "ALSA card file remove problem (%p)\n", file); return -ENOENT; } - kfree(mfile); + kfree(found); return 0; } -- cgit v1.2.3 From f9d202833d0beac09ef1c6a41305151da4fe5d4c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 11 Feb 2009 14:55:59 +0100 Subject: ALSA: rawmidi - Fix possible race in open The module refcount should be handled in the register_mutex to avoid possible races with module unloading. Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 002777ba336a..60f33e9412ad 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -237,15 +237,16 @@ int snd_rawmidi_kernel_open(struct snd_card *card, int device, int subdevice, rfile->input = rfile->output = NULL; mutex_lock(®ister_mutex); rmidi = snd_rawmidi_search(card, device); - mutex_unlock(®ister_mutex); if (rmidi == NULL) { - err = -ENODEV; - goto __error1; + mutex_unlock(®ister_mutex); + return -ENODEV; } if (!try_module_get(rmidi->card->module)) { - err = -EFAULT; - goto __error1; + mutex_unlock(®ister_mutex); + return -ENXIO; } + mutex_unlock(®ister_mutex); + if (!(mode & SNDRV_RAWMIDI_LFLG_NOOPENLOCK)) mutex_lock(&rmidi->open_mutex); if (mode & SNDRV_RAWMIDI_LFLG_INPUT) { @@ -370,10 +371,9 @@ int snd_rawmidi_kernel_open(struct snd_card *card, int device, int subdevice, snd_rawmidi_runtime_free(sinput); if (output != NULL) snd_rawmidi_runtime_free(soutput); - module_put(rmidi->card->module); if (!(mode & SNDRV_RAWMIDI_LFLG_NOOPENLOCK)) mutex_unlock(&rmidi->open_mutex); - __error1: + module_put(rmidi->card->module); return err; } -- cgit v1.2.3 From 9a1b64caac82aa02cb74587ffc798e6f42c6170a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 11 Feb 2009 17:03:49 +0100 Subject: ALSA: rawmidi - Refactor rawmidi open/close codes Refactor rawmidi open/close code messes. Signed-off-by: Takashi Iwai --- include/sound/rawmidi.h | 1 - sound/core/rawmidi.c | 377 +++++++++++++++++++++++++----------------------- 2 files changed, 194 insertions(+), 184 deletions(-) diff --git a/include/sound/rawmidi.h b/include/sound/rawmidi.h index b550a416d075..c23c26585700 100644 --- a/include/sound/rawmidi.h +++ b/include/sound/rawmidi.h @@ -42,7 +42,6 @@ #define SNDRV_RAWMIDI_LFLG_INPUT (1<<1) #define SNDRV_RAWMIDI_LFLG_OPEN (3<<0) #define SNDRV_RAWMIDI_LFLG_APPEND (1<<2) -#define SNDRV_RAWMIDI_LFLG_NOOPENLOCK (1<<3) struct snd_rawmidi; struct snd_rawmidi_substream; diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 60f33e9412ad..473247c8e6d3 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -224,156 +224,143 @@ int snd_rawmidi_drain_input(struct snd_rawmidi_substream *substream) return 0; } -int snd_rawmidi_kernel_open(struct snd_card *card, int device, int subdevice, - int mode, struct snd_rawmidi_file * rfile) +/* look for an available substream for the given stream direction; + * if a specific subdevice is given, try to assign it + */ +static int assign_substream(struct snd_rawmidi *rmidi, int subdevice, + int stream, int mode, + struct snd_rawmidi_substream **sub_ret) { - struct snd_rawmidi *rmidi; - struct list_head *list1, *list2; - struct snd_rawmidi_substream *sinput = NULL, *soutput = NULL; - struct snd_rawmidi_runtime *input = NULL, *output = NULL; - int err; + struct snd_rawmidi_substream *substream; + struct snd_rawmidi_str *s = &rmidi->streams[stream]; + static unsigned int info_flags[2] = { + [SNDRV_RAWMIDI_STREAM_OUTPUT] = SNDRV_RAWMIDI_INFO_OUTPUT, + [SNDRV_RAWMIDI_STREAM_INPUT] = SNDRV_RAWMIDI_INFO_INPUT, + }; - if (rfile) - rfile->input = rfile->output = NULL; - mutex_lock(®ister_mutex); - rmidi = snd_rawmidi_search(card, device); - if (rmidi == NULL) { - mutex_unlock(®ister_mutex); - return -ENODEV; - } - if (!try_module_get(rmidi->card->module)) { - mutex_unlock(®ister_mutex); + if (!(rmidi->info_flags & info_flags[stream])) return -ENXIO; + if (subdevice >= 0 && subdevice >= s->substream_count) + return -ENODEV; + if (s->substream_opened >= s->substream_count) + return -EAGAIN; + + list_for_each_entry(substream, &s->substreams, list) { + if (substream->opened) { + if (stream == SNDRV_RAWMIDI_STREAM_INPUT || + !(mode & SNDRV_RAWMIDI_LFLG_APPEND)) + continue; + } + if (subdevice < 0 || subdevice == substream->number) { + *sub_ret = substream; + return 0; + } } - mutex_unlock(®ister_mutex); + return -EAGAIN; +} - if (!(mode & SNDRV_RAWMIDI_LFLG_NOOPENLOCK)) - mutex_lock(&rmidi->open_mutex); +/* open and do ref-counting for the given substream */ +static int open_substream(struct snd_rawmidi *rmidi, + struct snd_rawmidi_substream *substream, + int mode) +{ + int err; + + err = snd_rawmidi_runtime_create(substream); + if (err < 0) + return err; + err = substream->ops->open(substream); + if (err < 0) + return err; + substream->opened = 1; + if (substream->use_count++ == 0) + substream->active_sensing = 1; + if (mode & SNDRV_RAWMIDI_LFLG_APPEND) + substream->append = 1; + rmidi->streams[substream->stream].substream_opened++; + return 0; +} + +static void close_substream(struct snd_rawmidi *rmidi, + struct snd_rawmidi_substream *substream, + int cleanup); + +static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, + struct snd_rawmidi_file *rfile) +{ + struct snd_rawmidi_substream *sinput = NULL, *soutput = NULL; + int err; + + rfile->input = rfile->output = NULL; if (mode & SNDRV_RAWMIDI_LFLG_INPUT) { - if (!(rmidi->info_flags & SNDRV_RAWMIDI_INFO_INPUT)) { - err = -ENXIO; - goto __error; - } - if (subdevice >= 0 && (unsigned int)subdevice >= rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substream_count) { - err = -ENODEV; - goto __error; - } - if (rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substream_opened >= - rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substream_count) { - err = -EAGAIN; + err = assign_substream(rmidi, subdevice, + SNDRV_RAWMIDI_STREAM_INPUT, + mode, &sinput); + if (err < 0) goto __error; - } } if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { - if (!(rmidi->info_flags & SNDRV_RAWMIDI_INFO_OUTPUT)) { - err = -ENXIO; - goto __error; - } - if (subdevice >= 0 && (unsigned int)subdevice >= rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substream_count) { - err = -ENODEV; - goto __error; - } - if (rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substream_opened >= - rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substream_count) { - err = -EAGAIN; + err = assign_substream(rmidi, subdevice, + SNDRV_RAWMIDI_STREAM_OUTPUT, + mode, &soutput); + if (err < 0) goto __error; - } - } - list1 = rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substreams.next; - while (1) { - if (list1 == &rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substreams) { - sinput = NULL; - if (mode & SNDRV_RAWMIDI_LFLG_INPUT) { - err = -EAGAIN; - goto __error; - } - break; - } - sinput = list_entry(list1, struct snd_rawmidi_substream, list); - if ((mode & SNDRV_RAWMIDI_LFLG_INPUT) && sinput->opened) - goto __nexti; - if (subdevice < 0 || (subdevice >= 0 && subdevice == sinput->number)) - break; - __nexti: - list1 = list1->next; - } - list2 = rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams.next; - while (1) { - if (list2 == &rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams) { - soutput = NULL; - if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { - err = -EAGAIN; - goto __error; - } - break; - } - soutput = list_entry(list2, struct snd_rawmidi_substream, list); - if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { - if (mode & SNDRV_RAWMIDI_LFLG_APPEND) { - if (soutput->opened && !soutput->append) - goto __nexto; - } else { - if (soutput->opened) - goto __nexto; - } - } - if (subdevice < 0 || (subdevice >= 0 && subdevice == soutput->number)) - break; - __nexto: - list2 = list2->next; } - if (mode & SNDRV_RAWMIDI_LFLG_INPUT) { - if ((err = snd_rawmidi_runtime_create(sinput)) < 0) - goto __error; - input = sinput->runtime; - if ((err = sinput->ops->open(sinput)) < 0) + + if (sinput) { + err = open_substream(rmidi, sinput, mode); + if (err < 0) goto __error; - sinput->opened = 1; - rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substream_opened++; - } else { - sinput = NULL; } - if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { - if (soutput->opened) - goto __skip_output; - if ((err = snd_rawmidi_runtime_create(soutput)) < 0) { - if (mode & SNDRV_RAWMIDI_LFLG_INPUT) - sinput->ops->close(sinput); - goto __error; - } - output = soutput->runtime; - if ((err = soutput->ops->open(soutput)) < 0) { - if (mode & SNDRV_RAWMIDI_LFLG_INPUT) - sinput->ops->close(sinput); + if (soutput) { + err = open_substream(rmidi, soutput, mode); + if (err < 0) { + if (sinput) + close_substream(rmidi, sinput, 0); goto __error; } - __skip_output: - soutput->opened = 1; - if (mode & SNDRV_RAWMIDI_LFLG_APPEND) - soutput->append = 1; - if (soutput->use_count++ == 0) - soutput->active_sensing = 1; - rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substream_opened++; - } else { - soutput = NULL; - } - if (!(mode & SNDRV_RAWMIDI_LFLG_NOOPENLOCK)) - mutex_unlock(&rmidi->open_mutex); - if (rfile) { - rfile->rmidi = rmidi; - rfile->input = sinput; - rfile->output = soutput; } + + rfile->rmidi = rmidi; + rfile->input = sinput; + rfile->output = soutput; return 0; __error: - if (input != NULL) + if (sinput && sinput->runtime) snd_rawmidi_runtime_free(sinput); - if (output != NULL) + if (soutput && soutput->runtime) snd_rawmidi_runtime_free(soutput); - if (!(mode & SNDRV_RAWMIDI_LFLG_NOOPENLOCK)) - mutex_unlock(&rmidi->open_mutex); - module_put(rmidi->card->module); + return err; +} + +/* called from sound/core/seq/seq_midi.c */ +int snd_rawmidi_kernel_open(struct snd_card *card, int device, int subdevice, + int mode, struct snd_rawmidi_file * rfile) +{ + struct snd_rawmidi *rmidi; + int err; + + if (snd_BUG_ON(!rfile)) + return -EINVAL; + + mutex_lock(®ister_mutex); + rmidi = snd_rawmidi_search(card, device); + if (rmidi == NULL) { + mutex_unlock(®ister_mutex); + return -ENODEV; + } + if (!try_module_get(rmidi->card->module)) { + mutex_unlock(®ister_mutex); + return -ENXIO; + } + mutex_unlock(®ister_mutex); + + mutex_lock(&rmidi->open_mutex); + err = rawmidi_open_priv(rmidi, subdevice, mode, rfile); + mutex_unlock(&rmidi->open_mutex); + if (err < 0) + module_put(rmidi->card->module); return err; } @@ -385,10 +372,13 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) unsigned short fflags; int err; struct snd_rawmidi *rmidi; - struct snd_rawmidi_file *rawmidi_file; + struct snd_rawmidi_file *rawmidi_file = NULL; wait_queue_t wait; struct snd_ctl_file *kctl; + if ((file->f_flags & O_APPEND) && !(file->f_flags & O_NONBLOCK)) + return -EINVAL; /* invalid combination */ + if (maj == snd_major) { rmidi = snd_lookup_minor_data(iminor(inode), SNDRV_DEVICE_TYPE_RAWMIDI); @@ -402,24 +392,25 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) if (rmidi == NULL) return -ENODEV; - if ((file->f_flags & O_APPEND) && !(file->f_flags & O_NONBLOCK)) - return -EINVAL; /* invalid combination */ + + if (!try_module_get(rmidi->card->module)) + return -ENXIO; + + mutex_lock(&rmidi->open_mutex); card = rmidi->card; err = snd_card_file_add(card, file); if (err < 0) - return -ENODEV; + goto __error_card; fflags = snd_rawmidi_file_flags(file); if ((file->f_flags & O_APPEND) || maj == SOUND_MAJOR) /* OSS emul? */ fflags |= SNDRV_RAWMIDI_LFLG_APPEND; - fflags |= SNDRV_RAWMIDI_LFLG_NOOPENLOCK; rawmidi_file = kmalloc(sizeof(*rawmidi_file), GFP_KERNEL); if (rawmidi_file == NULL) { - snd_card_file_remove(card, file); - return -ENOMEM; + err = -ENOMEM; + goto __error; } init_waitqueue_entry(&wait, current); add_wait_queue(&rmidi->open_wait, &wait); - mutex_lock(&rmidi->open_mutex); while (1) { subdevice = -1; read_lock(&card->ctl_files_rwlock); @@ -431,8 +422,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) } } read_unlock(&card->ctl_files_rwlock); - err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device, - subdevice, fflags, rawmidi_file); + err = rawmidi_open_priv(rmidi, subdevice, fflags, rawmidi_file); if (err >= 0) break; if (err == -EAGAIN) { @@ -451,67 +441,89 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) break; } } + remove_wait_queue(&rmidi->open_wait, &wait); + if (err < 0) { + kfree(rawmidi_file); + goto __error; + } #ifdef CONFIG_SND_OSSEMUL if (rawmidi_file->input && rawmidi_file->input->runtime) rawmidi_file->input->runtime->oss = (maj == SOUND_MAJOR); if (rawmidi_file->output && rawmidi_file->output->runtime) rawmidi_file->output->runtime->oss = (maj == SOUND_MAJOR); #endif - remove_wait_queue(&rmidi->open_wait, &wait); - if (err >= 0) { - file->private_data = rawmidi_file; - } else { - snd_card_file_remove(card, file); - kfree(rawmidi_file); - } + file->private_data = rawmidi_file; mutex_unlock(&rmidi->open_mutex); + return 0; + + __error: + snd_card_file_remove(card, file); + __error_card: + mutex_unlock(&rmidi->open_mutex); + module_put(rmidi->card->module); return err; } -int snd_rawmidi_kernel_release(struct snd_rawmidi_file * rfile) +static void close_substream(struct snd_rawmidi *rmidi, + struct snd_rawmidi_substream *substream, + int cleanup) { - struct snd_rawmidi *rmidi; - struct snd_rawmidi_substream *substream; - struct snd_rawmidi_runtime *runtime; + rmidi->streams[substream->stream].substream_opened--; + if (--substream->use_count) + return; - if (snd_BUG_ON(!rfile)) - return -ENXIO; - rmidi = rfile->rmidi; - mutex_lock(&rmidi->open_mutex); - if (rfile->input != NULL) { - substream = rfile->input; - rfile->input = NULL; - runtime = substream->runtime; - snd_rawmidi_input_trigger(substream, 0); - substream->ops->close(substream); - if (runtime->private_free != NULL) - runtime->private_free(substream); - snd_rawmidi_runtime_free(substream); - substream->opened = 0; - rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substream_opened--; - } - if (rfile->output != NULL) { - substream = rfile->output; - rfile->output = NULL; - if (--substream->use_count == 0) { - runtime = substream->runtime; + if (cleanup) { + if (substream->stream == SNDRV_RAWMIDI_STREAM_INPUT) + snd_rawmidi_input_trigger(substream, 0); + else { if (substream->active_sensing) { unsigned char buf = 0xfe; - /* sending single active sensing message to shut the device up */ + /* sending single active sensing message + * to shut the device up + */ snd_rawmidi_kernel_write(substream, &buf, 1); } if (snd_rawmidi_drain_output(substream) == -ERESTARTSYS) snd_rawmidi_output_trigger(substream, 0); - substream->ops->close(substream); - if (runtime->private_free != NULL) - runtime->private_free(substream); - snd_rawmidi_runtime_free(substream); - substream->opened = 0; - substream->append = 0; } - rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substream_opened--; } + substream->ops->close(substream); + if (substream->runtime->private_free) + substream->runtime->private_free(substream); + snd_rawmidi_runtime_free(substream); + substream->opened = 0; + substream->append = 0; +} + +static void rawmidi_release_priv(struct snd_rawmidi_file *rfile) +{ + struct snd_rawmidi *rmidi; + + rmidi = rfile->rmidi; + mutex_lock(&rmidi->open_mutex); + if (rfile->input) { + close_substream(rmidi, rfile->input, 1); + rfile->input = NULL; + } + if (rfile->output) { + close_substream(rmidi, rfile->output, 1); + rfile->output = NULL; + } + rfile->rmidi = NULL; mutex_unlock(&rmidi->open_mutex); + wake_up(&rmidi->open_wait); +} + +/* called from sound/core/seq/seq_midi.c */ +int snd_rawmidi_kernel_release(struct snd_rawmidi_file *rfile) +{ + struct snd_rawmidi *rmidi; + + if (snd_BUG_ON(!rfile)) + return -ENXIO; + + rmidi = rfile->rmidi; + rawmidi_release_priv(rfile); module_put(rmidi->card->module); return 0; } @@ -520,15 +532,14 @@ static int snd_rawmidi_release(struct inode *inode, struct file *file) { struct snd_rawmidi_file *rfile; struct snd_rawmidi *rmidi; - int err; rfile = file->private_data; - err = snd_rawmidi_kernel_release(rfile); rmidi = rfile->rmidi; - wake_up(&rmidi->open_wait); + rawmidi_release_priv(rfile); kfree(rfile); snd_card_file_remove(rmidi->card, file); - return err; + module_put(rmidi->card->module); + return 0; } static int snd_rawmidi_info(struct snd_rawmidi_substream *substream, -- cgit v1.2.3 From 5f8206c04857965cc2ff6c395633c4fdd977dd77 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Feb 2009 08:50:43 +0100 Subject: ALSA: Fix DocBook headers Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl | 10 ++++++---- Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 8 ++++---- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl index 90f163c4bde9..0230a96f0564 100644 --- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl +++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl @@ -1,11 +1,11 @@ - - - - + + + The ALSA Driver API @@ -35,6 +35,8 @@ + + Management of Cards and Devices Card Management !Esound/core/init.c diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 320384c1791b..46b08fef3744 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -1,11 +1,11 @@ - - - - + + + Writing an ALSA Driver -- cgit v1.2.3 From e776ec19a47a325ee1d9ece2d983526dcd626c53 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 28 Feb 2009 17:40:18 +0100 Subject: ALSA: Move ALSA docbooks to be with the rest of the kernel docbooks Move ALSA docbooks to be with the rest of the kernel docbooks and add them to the Makefile so that they build. Latter required a few minor changes to alsa .tmpl files. (I did not remove all of the trailing whitespace in the .tmpl files.) Fixes kernel bugzilla #12726: http://bugzilla.kernel.org/show_bug.cgi?id=12726 Signed-off-by: Randy Dunlap Cc: documentation_man-pages@kernel-bugs.osdl.org Cc: Nicola Soranzo Signed-off-by: Takashi Iwai --- Documentation/DocBook/Makefile | 3 +- Documentation/DocBook/alsa-driver-api.tmpl | 109 + Documentation/DocBook/writing-an-alsa-driver.tmpl | 6216 ++++++++++++++++++++ .../sound/alsa/DocBook/alsa-driver-api.tmpl | 109 - .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 6216 -------------------- 5 files changed, 6327 insertions(+), 6326 deletions(-) create mode 100644 Documentation/DocBook/alsa-driver-api.tmpl create mode 100644 Documentation/DocBook/writing-an-alsa-driver.tmpl delete mode 100644 Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl delete mode 100644 Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 1462ed86d40a..a3a83d38f96f 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml sh.xml regulator.xml + mac80211.xml debugobjects.xml sh.xml regulator.xml \ + alsa-driver-api.xml writing-an-alsa-driver.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/alsa-driver-api.tmpl b/Documentation/DocBook/alsa-driver-api.tmpl new file mode 100644 index 000000000000..0230a96f0564 --- /dev/null +++ b/Documentation/DocBook/alsa-driver-api.tmpl @@ -0,0 +1,109 @@ + + + + + + + + + The ALSA Driver API + + + + This document is free; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + + + This document is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the + implied warranty of MERCHANTABILITY or FITNESS FOR A + PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + + + + + Management of Cards and Devices + Card Management +!Esound/core/init.c + + Device Components +!Esound/core/device.c + + Module requests and Device File Entries +!Esound/core/sound.c + + Memory Management Helpers +!Esound/core/memory.c +!Esound/core/memalloc.c + + + PCM API + PCM Core +!Esound/core/pcm.c +!Esound/core/pcm_lib.c +!Esound/core/pcm_native.c + + PCM Format Helpers +!Esound/core/pcm_misc.c + + PCM Memory Management +!Esound/core/pcm_memory.c + + + Control/Mixer API + General Control Interface +!Esound/core/control.c + + AC97 Codec API +!Esound/pci/ac97/ac97_codec.c +!Esound/pci/ac97/ac97_pcm.c + + Virtual Master Control API +!Esound/core/vmaster.c +!Iinclude/sound/control.h + + + MIDI API + Raw MIDI API +!Esound/core/rawmidi.c + + MPU401-UART API +!Esound/drivers/mpu401/mpu401_uart.c + + + Proc Info API + Proc Info Interface +!Esound/core/info.c + + + Miscellaneous Functions + Hardware-Dependent Devices API +!Esound/core/hwdep.c + + Jack Abstraction Layer API +!Esound/core/jack.c + + ISA DMA Helpers +!Esound/core/isadma.c + + Other Helper Macros +!Iinclude/sound/core.h + + + + diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl new file mode 100644 index 000000000000..46b08fef3744 --- /dev/null +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -0,0 +1,6216 @@ + + + + + + + + + Writing an ALSA Driver + + Takashi + Iwai + +
+ tiwai@suse.de +
+ + + + Oct 15, 2007 + 0.3.7 + + + + This document describes how to write an ALSA (Advanced Linux + Sound Architecture) driver. + + + + + + Copyright (c) 2002-2005 Takashi Iwai tiwai@suse.de + + + + This document is free; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + + + This document is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the + implied warranty of MERCHANTABILITY or FITNESS FOR A + PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + + + + + + + Preface + + This document describes how to write an + + ALSA (Advanced Linux Sound Architecture) + driver. The document focuses mainly on PCI soundcards. + In the case of other device types, the API might + be different, too. However, at least the ALSA kernel API is + consistent, and therefore it would be still a bit help for + writing them. + + + + This document targets people who already have enough + C language skills and have basic linux kernel programming + knowledge. This document doesn't explain the general + topic of linux kernel coding and doesn't cover low-level + driver implementation details. It only describes + the standard way to write a PCI sound driver on ALSA. + + + + If you are already familiar with the older ALSA ver.0.5.x API, you + can check the drivers such as sound/pci/es1938.c or + sound/pci/maestro3.c which have also almost the same + code-base in the ALSA 0.5.x tree, so you can compare the differences. + + + + This document is still a draft version. Any feedback and + corrections, please!! + + + + + + + + + File Tree Structure + +
+ General + + The ALSA drivers are provided in two ways. + + + + One is the trees provided as a tarball or via cvs from the + ALSA's ftp site, and another is the 2.6 (or later) Linux kernel + tree. To synchronize both, the ALSA driver tree is split into + two different trees: alsa-kernel and alsa-driver. The former + contains purely the source code for the Linux 2.6 (or later) + tree. This tree is designed only for compilation on 2.6 or + later environment. The latter, alsa-driver, contains many subtle + files for compiling ALSA drivers outside of the Linux kernel tree, + wrapper functions for older 2.2 and 2.4 kernels, to adapt the latest kernel API, + and additional drivers which are still in development or in + tests. The drivers in alsa-driver tree will be moved to + alsa-kernel (and eventually to the 2.6 kernel tree) when they are + finished and confirmed to work fine. + + + + The file tree structure of ALSA driver is depicted below. Both + alsa-kernel and alsa-driver have almost the same file + structure, except for core directory. It's + named as acore in alsa-driver tree. + + + ALSA File Tree Structure + + sound + /core + /oss + /seq + /oss + /instr + /ioctl32 + /include + /drivers + /mpu401 + /opl3 + /i2c + /l3 + /synth + /emux + /pci + /(cards) + /isa + /(cards) + /arm + /ppc + /sparc + /usb + /pcmcia /(cards) + /oss + + + +
+ +
+ core directory + + This directory contains the middle layer which is the heart + of ALSA drivers. In this directory, the native ALSA modules are + stored. The sub-directories contain different modules and are + dependent upon the kernel config. + + +
+ core/oss + + + The codes for PCM and mixer OSS emulation modules are stored + in this directory. The rawmidi OSS emulation is included in + the ALSA rawmidi code since it's quite small. The sequencer + code is stored in core/seq/oss directory (see + + below). + +
+ +
+ core/ioctl32 + + + This directory contains the 32bit-ioctl wrappers for 64bit + architectures such like x86-64, ppc64 and sparc64. For 32bit + and alpha architectures, these are not compiled. + +
+ +
+ core/seq + + This directory and its sub-directories are for the ALSA + sequencer. This directory contains the sequencer core and + primary sequencer modules such like snd-seq-midi, + snd-seq-virmidi, etc. They are compiled only when + CONFIG_SND_SEQUENCER is set in the kernel + config. + +
+ +
+ core/seq/oss + + This contains the OSS sequencer emulation codes. + +
+ +
+ core/seq/instr + + This directory contains the modules for the sequencer + instrument layer. + +
+
+ +
+ include directory + + This is the place for the public header files of ALSA drivers, + which are to be exported to user-space, or included by + several files at different directories. Basically, the private + header files should not be placed in this directory, but you may + still find files there, due to historical reasons :) + +
+ +
+ drivers directory + + This directory contains code shared among different drivers + on different architectures. They are hence supposed not to be + architecture-specific. + For example, the dummy pcm driver and the serial MIDI + driver are found in this directory. In the sub-directories, + there is code for components which are independent from + bus and cpu architectures. + + +
+ drivers/mpu401 + + The MPU401 and MPU401-UART modules are stored here. + +
+ +
+ drivers/opl3 and opl4 + + The OPL3 and OPL4 FM-synth stuff is found here. + +
+
+ +
+ i2c directory + + This contains the ALSA i2c components. + + + + Although there is a standard i2c layer on Linux, ALSA has its + own i2c code for some cards, because the soundcard needs only a + simple operation and the standard i2c API is too complicated for + such a purpose. + + +
+ i2c/l3 + + This is a sub-directory for ARM L3 i2c. + +
+
+ +
+ synth directory + + This contains the synth middle-level modules. + + + + So far, there is only Emu8000/Emu10k1 synth driver under + the synth/emux sub-directory. + +
+ +
+ pci directory + + This directory and its sub-directories hold the top-level card modules + for PCI soundcards and the code specific to the PCI BUS. + + + + The drivers compiled from a single file are stored directly + in the pci directory, while the drivers with several source files are + stored on their own sub-directory (e.g. emu10k1, ice1712). + +
+ +
+ isa directory + + This directory and its sub-directories hold the top-level card modules + for ISA soundcards. + +
+ +
+ arm, ppc, and sparc directories + + They are used for top-level card modules which are + specific to one of these architectures. + +
+ +
+ usb directory + + This directory contains the USB-audio driver. In the latest version, the + USB MIDI driver is integrated in the usb-audio driver. + +
+ +
+ pcmcia directory + + The PCMCIA, especially PCCard drivers will go here. CardBus + drivers will be in the pci directory, because their API is identical + to that of standard PCI cards. + +
+ +
+ oss directory + + The OSS/Lite source files are stored here in Linux 2.6 (or + later) tree. In the ALSA driver tarball, this directory is empty, + of course :) + +
+ + + + + + + + Basic Flow for PCI Drivers + +
+ Outline + + The minimum flow for PCI soundcards is as follows: + + + define the PCI ID table (see the section + PCI Entries + ). + create probe() callback. + create remove() callback. + create a pci_driver structure + containing the three pointers above. + create an init() function just calling + the pci_register_driver() to register the pci_driver table + defined above. + create an exit() function to call + the pci_unregister_driver() function. + + +
+ +
+ Full Code Example + + The code example is shown below. Some parts are kept + unimplemented at this moment but will be filled in the + next sections. The numbers in the comment lines of the + snd_mychip_probe() function + refer to details explained in the following section. + + + Basic Flow for PCI Drivers - Example + + + #include + #include + #include + #include + + /* module parameters (see "Module Parameters") */ + /* SNDRV_CARDS: maximum number of cards supported by this module */ + static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; + static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; + static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + + /* definition of the chip-specific record */ + struct mychip { + struct snd_card *card; + /* the rest of the implementation will be in section + * "PCI Resource Management" + */ + }; + + /* chip-specific destructor + * (see "PCI Resource Management") + */ + static int snd_mychip_free(struct mychip *chip) + { + .... /* will be implemented later... */ + } + + /* component-destructor + * (see "Management of Cards and Components") + */ + static int snd_mychip_dev_free(struct snd_device *device) + { + return snd_mychip_free(device->device_data); + } + + /* chip-specific constructor + * (see "Management of Cards and Components") + */ + static int __devinit snd_mychip_create(struct snd_card *card, + struct pci_dev *pci, + struct mychip **rchip) + { + struct mychip *chip; + int err; + static struct snd_device_ops ops = { + .dev_free = snd_mychip_dev_free, + }; + + *rchip = NULL; + + /* check PCI availability here + * (see "PCI Resource Management") + */ + .... + + /* allocate a chip-specific data with zero filled */ + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + chip->card = card; + + /* rest of initialization here; will be implemented + * later, see "PCI Resource Management" + */ + .... + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { + snd_mychip_free(chip); + return err; + } + + snd_card_set_dev(card, &pci->dev); + + *rchip = chip; + return 0; + } + + /* constructor -- see "Constructor" sub-section */ + static int __devinit snd_mychip_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) + { + static int dev; + struct snd_card *card; + struct mychip *chip; + int err; + + /* (1) */ + if (dev >= SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } + + /* (2) */ + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) + return err; + + /* (3) */ + err = snd_mychip_create(card, pci, &chip); + if (err < 0) { + snd_card_free(card); + return err; + } + + /* (4) */ + strcpy(card->driver, "My Chip"); + strcpy(card->shortname, "My Own Chip 123"); + sprintf(card->longname, "%s at 0x%lx irq %i", + card->shortname, chip->ioport, chip->irq); + + /* (5) */ + .... /* implemented later */ + + /* (6) */ + err = snd_card_register(card); + if (err < 0) { + snd_card_free(card); + return err; + } + + /* (7) */ + pci_set_drvdata(pci, card); + dev++; + return 0; + } + + /* destructor -- see the "Destructor" sub-section */ + static void __devexit snd_mychip_remove(struct pci_dev *pci) + { + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); + } +]]> + + + +
+ +
+ Constructor + + The real constructor of PCI drivers is the probe callback. + The probe callback and other component-constructors which are called + from the probe callback should be defined with + the __devinit prefix. You + cannot use the __init prefix for them, + because any PCI device could be a hotplug device. + + + + In the probe callback, the following scheme is often used. + + +
+ 1) Check and increment the device index. + + + += SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } +]]> + + + + where enable[dev] is the module option. + + + + Each time the probe callback is called, check the + availability of the device. If not available, simply increment + the device index and returns. dev will be incremented also + later (step + 7). + +
+ +
+ 2) Create a card instance + + + + + + + + + + The details will be explained in the section + + Management of Cards and Components. + +
+ +
+ 3) Create a main component + + In this part, the PCI resources are allocated. + + + + + + + + The details will be explained in the section PCI Resource + Management. + +
+ +
+ 4) Set the driver ID and name strings. + + + +driver, "My Chip"); + strcpy(card->shortname, "My Own Chip 123"); + sprintf(card->longname, "%s at 0x%lx irq %i", + card->shortname, chip->ioport, chip->irq); +]]> + + + + The driver field holds the minimal ID string of the + chip. This is used by alsa-lib's configurator, so keep it + simple but unique. + Even the same driver can have different driver IDs to + distinguish the functionality of each chip type. + + + + The shortname field is a string shown as more verbose + name. The longname field contains the information + shown in /proc/asound/cards. + +
+ +
+ 5) Create other components, such as mixer, MIDI, etc. + + Here you define the basic components such as + PCM, + mixer (e.g. AC97), + MIDI (e.g. MPU-401), + and other interfaces. + Also, if you want a proc + file, define it here, too. + +
+ +
+ 6) Register the card instance. + + + + + + + + + + Will be explained in the section Management + of Cards and Components, too. + +
+ +
+ 7) Set the PCI driver data and return zero. + + + + + + + + In the above, the card record is stored. This pointer is + used in the remove callback and power-management + callbacks, too. + +
+
+ +
+ Destructor + + The destructor, remove callback, simply releases the card + instance. Then the ALSA middle layer will release all the + attached components automatically. + + + + It would be typically like the following: + + + + + + + + The above code assumes that the card pointer is set to the PCI + driver data. + +
+ +
+ Header Files + + For the above example, at least the following include files + are necessary. + + + + + #include + #include + #include + #include +]]> + + + + where the last one is necessary only when module options are + defined in the source file. If the code is split into several + files, the files without module options don't need them. + + + + In addition to these headers, you'll need + <linux/interrupt.h> for interrupt + handling, and <asm/io.h> for I/O + access. If you use the mdelay() or + udelay() functions, you'll need to include + <linux/delay.h> too. + + + + The ALSA interfaces like the PCM and control APIs are defined in other + <sound/xxx.h> header files. + They have to be included after + <sound/core.h>. + + +
+ + + + + + + + Management of Cards and Components + +
+ Card Instance + + For each soundcard, a card record must be allocated. + + + + A card record is the headquarters of the soundcard. It manages + the whole list of devices (components) on the soundcard, such as + PCM, mixers, MIDI, synthesizer, and so on. Also, the card + record holds the ID and the name strings of the card, manages + the root of proc files, and controls the power-management states + and hotplug disconnections. The component list on the card + record is used to manage the correct release of resources at + destruction. + + + + As mentioned above, to create a card instance, call + snd_card_create(). + + + + + + + + + + The function takes five arguments, the card-index number, the + id string, the module pointer (usually + THIS_MODULE), + the size of extra-data space, and the pointer to return the + card instance. The extra_size argument is used to + allocate card->private_data for the + chip-specific data. Note that these data + are allocated by snd_card_create(). + +
+ +
+ Components + + After the card is created, you can attach the components + (devices) to the card instance. In an ALSA driver, a component is + represented as a struct snd_device object. + A component can be a PCM instance, a control interface, a raw + MIDI interface, etc. Each such instance has one component + entry. + + + + A component can be created via + snd_device_new() function. + + + + + + + + + + This takes the card pointer, the device-level + (SNDRV_DEV_XXX), the data pointer, and the + callback pointers (&ops). The + device-level defines the type of components and the order of + registration and de-registration. For most components, the + device-level is already defined. For a user-defined component, + you can use SNDRV_DEV_LOWLEVEL. + + + + This function itself doesn't allocate the data space. The data + must be allocated manually beforehand, and its pointer is passed + as the argument. This pointer is used as the + (chip identifier in the above example) + for the instance. + + + + Each pre-defined ALSA component such as ac97 and pcm calls + snd_device_new() inside its + constructor. The destructor for each component is defined in the + callback pointers. Hence, you don't need to take care of + calling a destructor for such a component. + + + + If you wish to create your own component, you need to + set the destructor function to the dev_free callback in + the ops, so that it can be released + automatically via snd_card_free(). + The next example will show an implementation of chip-specific + data. + +
+ +
+ Chip-Specific Data + + Chip-specific information, e.g. the I/O port address, its + resource pointer, or the irq number, is stored in the + chip-specific record. + + + + + + + + + + In general, there are two ways of allocating the chip record. + + +
+ 1. Allocating via <function>snd_card_create()</function>. + + As mentioned above, you can pass the extra-data-length + to the 4th argument of snd_card_create(), i.e. + + + + + + + + struct mychip is the type of the chip record. + + + + In return, the allocated record can be accessed as + + + +private_data; +]]> + + + + With this method, you don't have to allocate twice. + The record is released together with the card instance. + +
+ +
+ 2. Allocating an extra device. + + + After allocating a card instance via + snd_card_create() (with + 0 on the 4th arg), call + kzalloc(). + + + + + + + + + + The chip record should have the field to hold the card + pointer at least, + + + + + + + + + + Then, set the card pointer in the returned chip instance. + + + +card = card; +]]> + + + + + + Next, initialize the fields, and register this chip + record as a low-level device with a specified + ops, + + + + + + + + snd_mychip_dev_free() is the + device-destructor function, which will call the real + destructor. + + + + + +device_data); + } +]]> + + + + where snd_mychip_free() is the real destructor. + +
+
+ +
+ Registration and Release + + After all components are assigned, register the card instance + by calling snd_card_register(). Access + to the device files is enabled at this point. That is, before + snd_card_register() is called, the + components are safely inaccessible from external side. If this + call fails, exit the probe function after releasing the card via + snd_card_free(). + + + + For releasing the card instance, you can call simply + snd_card_free(). As mentioned earlier, all + components are released automatically by this call. + + + + As further notes, the destructors (both + snd_mychip_dev_free and + snd_mychip_free) cannot be defined with + the __devexit prefix, because they may be + called from the constructor, too, at the false path. + + + + For a device which allows hotplugging, you can use + snd_card_free_when_closed. This one will + postpone the destruction until all devices are closed. + + +
+ + + + + + + + + PCI Resource Management + +
+ Full Code Example + + In this section, we'll complete the chip-specific constructor, + destructor and PCI entries. Example code is shown first, + below. + + + PCI Resource Management Example + +irq >= 0) + free_irq(chip->irq, chip); + /* release the I/O ports & memory */ + pci_release_regions(chip->pci); + /* disable the PCI entry */ + pci_disable_device(chip->pci); + /* release the data */ + kfree(chip); + return 0; + } + + /* chip-specific constructor */ + static int __devinit snd_mychip_create(struct snd_card *card, + struct pci_dev *pci, + struct mychip **rchip) + { + struct mychip *chip; + int err; + static struct snd_device_ops ops = { + .dev_free = snd_mychip_dev_free, + }; + + *rchip = NULL; + + /* initialize the PCI entry */ + err = pci_enable_device(pci); + if (err < 0) + return err; + /* check PCI availability (28bit DMA) */ + if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { + printk(KERN_ERR "error to set 28bit mask DMA\n"); + pci_disable_device(pci); + return -ENXIO; + } + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + pci_disable_device(pci); + return -ENOMEM; + } + + /* initialize the stuff */ + chip->card = card; + chip->pci = pci; + chip->irq = -1; + + /* (1) PCI resource allocation */ + err = pci_request_regions(pci, "My Chip"); + if (err < 0) { + kfree(chip); + pci_disable_device(pci); + return err; + } + chip->port = pci_resource_start(pci, 0); + if (request_irq(pci->irq, snd_mychip_interrupt, + IRQF_SHARED, "My Chip", chip)) { + printk(KERN_ERR "cannot grab irq %d\n", pci->irq); + snd_mychip_free(chip); + return -EBUSY; + } + chip->irq = pci->irq; + + /* (2) initialization of the chip hardware */ + .... /* (not implemented in this document) */ + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { + snd_mychip_free(chip); + return err; + } + + snd_card_set_dev(card, &pci->dev); + + *rchip = chip; + return 0; + } + + /* PCI IDs */ + static struct pci_device_id snd_mychip_ids[] = { + { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, + .... + { 0, } + }; + MODULE_DEVICE_TABLE(pci, snd_mychip_ids); + + /* pci_driver definition */ + static struct pci_driver driver = { + .name = "My Own Chip", + .id_table = snd_mychip_ids, + .probe = snd_mychip_probe, + .remove = __devexit_p(snd_mychip_remove), + }; + + /* module initialization */ + static int __init alsa_card_mychip_init(void) + { + return pci_register_driver(&driver); + } + + /* module clean up */ + static void __exit alsa_card_mychip_exit(void) + { + pci_unregister_driver(&driver); + } + + module_init(alsa_card_mychip_init) + module_exit(alsa_card_mychip_exit) + + EXPORT_NO_SYMBOLS; /* for old kernels only */ +]]> + + + +
+ +
+ Some Hafta's + + The allocation of PCI resources is done in the + probe() function, and usually an extra + xxx_create() function is written for this + purpose. + + + + In the case of PCI devices, you first have to call + the pci_enable_device() function before + allocating resources. Also, you need to set the proper PCI DMA + mask to limit the accessed I/O range. In some cases, you might + need to call pci_set_master() function, + too. + + + + Suppose the 28bit mask, and the code to be added would be like: + + + + + + + +
+ +
+ Resource Allocation + + The allocation of I/O ports and irqs is done via standard kernel + functions. Unlike ALSA ver.0.5.x., there are no helpers for + that. And these resources must be released in the destructor + function (see below). Also, on ALSA 0.9.x, you don't need to + allocate (pseudo-)DMA for PCI like in ALSA 0.5.x. + + + + Now assume that the PCI device has an I/O port with 8 bytes + and an interrupt. Then struct mychip will have the + following fields: + + + + + + + + + + For an I/O port (and also a memory region), you need to have + the resource pointer for the standard resource management. For + an irq, you have to keep only the irq number (integer). But you + need to initialize this number as -1 before actual allocation, + since irq 0 is valid. The port address and its resource pointer + can be initialized as null by + kzalloc() automatically, so you + don't have to take care of resetting them. + + + + The allocation of an I/O port is done like this: + + + +port = pci_resource_start(pci, 0); +]]> + + + + + + + It will reserve the I/O port region of 8 bytes of the given + PCI device. The returned value, chip->res_port, is allocated + via kmalloc() by + request_region(). The pointer must be + released via kfree(), but there is a + problem with this. This issue will be explained later. + + + + The allocation of an interrupt source is done like this: + + + +irq, snd_mychip_interrupt, + IRQF_SHARED, "My Chip", chip)) { + printk(KERN_ERR "cannot grab irq %d\n", pci->irq); + snd_mychip_free(chip); + return -EBUSY; + } + chip->irq = pci->irq; +]]> + + + + where snd_mychip_interrupt() is the + interrupt handler defined later. + Note that chip->irq should be defined + only when request_irq() succeeded. + + + + On the PCI bus, interrupts can be shared. Thus, + IRQF_SHARED is used as the interrupt flag of + request_irq(). + + + + The last argument of request_irq() is the + data pointer passed to the interrupt handler. Usually, the + chip-specific record is used for that, but you can use what you + like, too. + + + + I won't give details about the interrupt handler at this + point, but at least its appearance can be explained now. The + interrupt handler looks usually like the following: + + + + + + + + + + Now let's write the corresponding destructor for the resources + above. The role of destructor is simple: disable the hardware + (if already activated) and release the resources. So far, we + have no hardware part, so the disabling code is not written here. + + + + To release the resources, the check-and-release + method is a safer way. For the interrupt, do like this: + + + +irq >= 0) + free_irq(chip->irq, chip); +]]> + + + + Since the irq number can start from 0, you should initialize + chip->irq with a negative value (e.g. -1), so that you can + check the validity of the irq number as above. + + + + When you requested I/O ports or memory regions via + pci_request_region() or + pci_request_regions() like in this example, + release the resource(s) using the corresponding function, + pci_release_region() or + pci_release_regions(). + + + +pci); +]]> + + + + + + When you requested manually via request_region() + or request_mem_region, you can release it via + release_resource(). Suppose that you keep + the resource pointer returned from request_region() + in chip->res_port, the release procedure looks like: + + + +res_port); +]]> + + + + + + Don't forget to call pci_disable_device() + before the end. + + + + And finally, release the chip-specific record. + + + + + + + + + + Again, remember that you cannot + use the __devexit prefix for this destructor. + + + + We didn't implement the hardware disabling part in the above. + If you need to do this, please note that the destructor may be + called even before the initialization of the chip is completed. + It would be better to have a flag to skip hardware disabling + if the hardware was not initialized yet. + + + + When the chip-data is assigned to the card using + snd_device_new() with + SNDRV_DEV_LOWLELVEL , its destructor is + called at the last. That is, it is assured that all other + components like PCMs and controls have already been released. + You don't have to stop PCMs, etc. explicitly, but just + call low-level hardware stopping. + + + + The management of a memory-mapped region is almost as same as + the management of an I/O port. You'll need three fields like + the following: + + + + + + + + and the allocation would be like below: + + + +iobase_phys = pci_resource_start(pci, 0); + chip->iobase_virt = ioremap_nocache(chip->iobase_phys, + pci_resource_len(pci, 0)); +]]> + + + + and the corresponding destructor would be: + + + +iobase_virt) + iounmap(chip->iobase_virt); + .... + pci_release_regions(chip->pci); + .... + } +]]> + + + + +
+ +
+ Registration of Device Struct + + At some point, typically after calling snd_device_new(), + you need to register the struct device of the chip + you're handling for udev and co. ALSA provides a macro for compatibility with + older kernels. Simply call like the following: + + +dev); +]]> + + + so that it stores the PCI's device pointer to the card. This will be + referred by ALSA core functions later when the devices are registered. + + + In the case of non-PCI, pass the proper device struct pointer of the BUS + instead. (In the case of legacy ISA without PnP, you don't have to do + anything.) + +
+ +
+ PCI Entries + + So far, so good. Let's finish the missing PCI + stuff. At first, we need a + pci_device_id table for this + chipset. It's a table of PCI vendor/device ID number, and some + masks. + + + + For example, + + + + + + + + + + The first and second fields of + the pci_device_id structure are the vendor and + device IDs. If you have no reason to filter the matching + devices, you can leave the remaining fields as above. The last + field of the pci_device_id struct contains + private data for this entry. You can specify any value here, for + example, to define specific operations for supported device IDs. + Such an example is found in the intel8x0 driver. + + + + The last entry of this list is the terminator. You must + specify this all-zero entry. + + + + Then, prepare the pci_driver record: + + + + + + + + + + The probe and + remove functions have already + been defined in the previous sections. + The remove function should + be defined with the + __devexit_p() macro, so that it's not + defined for built-in (and non-hot-pluggable) case. The + name + field is the name string of this device. Note that you must not + use a slash / in this string. + + + + And at last, the module entries: + + + + + + + + + + Note that these module entries are tagged with + __init and + __exit prefixes, not + __devinit nor + __devexit. + + + + Oh, one thing was forgotten. If you have no exported symbols, + you need to declare it in 2.2 or 2.4 kernels (it's not necessary in 2.6 kernels). + + + + + + + + That's all! + +
+ + + + + + + + PCM Interface + +
+ General + + The PCM middle layer of ALSA is quite powerful and it is only + necessary for each driver to implement the low-level functions + to access its hardware. + + + + For accessing to the PCM layer, you need to include + <sound/pcm.h> first. In addition, + <sound/pcm_params.h> might be needed + if you access to some functions related with hw_param. + + + + Each card device can have up to four pcm instances. A pcm + instance corresponds to a pcm device file. The limitation of + number of instances comes only from the available bit size of + the Linux's device numbers. Once when 64bit device number is + used, we'll have more pcm instances available. + + + + A pcm instance consists of pcm playback and capture streams, + and each pcm stream consists of one or more pcm substreams. Some + soundcards support multiple playback functions. For example, + emu10k1 has a PCM playback of 32 stereo substreams. In this case, at + each open, a free substream is (usually) automatically chosen + and opened. Meanwhile, when only one substream exists and it was + already opened, the successful open will either block + or error with EAGAIN according to the + file open mode. But you don't have to care about such details in your + driver. The PCM middle layer will take care of such work. + +
+ +
+ Full Code Example + + The example code below does not include any hardware access + routines but shows only the skeleton, how to build up the PCM + interfaces. + + + PCM Example Code + + + .... + + /* hardware definition */ + static struct snd_pcm_hardware snd_mychip_playback_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 32768, + .period_bytes_min = 4096, + .period_bytes_max = 32768, + .periods_min = 1, + .periods_max = 1024, + }; + + /* hardware definition */ + static struct snd_pcm_hardware snd_mychip_capture_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 32768, + .period_bytes_min = 4096, + .period_bytes_max = 32768, + .periods_min = 1, + .periods_max = 1024, + }; + + /* open callback */ + static int snd_mychip_playback_open(struct snd_pcm_substream *substream) + { + struct mychip *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + runtime->hw = snd_mychip_playback_hw; + /* more hardware-initialization will be done here */ + .... + return 0; + } + + /* close callback */ + static int snd_mychip_playback_close(struct snd_pcm_substream *substream) + { + struct mychip *chip = snd_pcm_substream_chip(substream); + /* the hardware-specific codes will be here */ + .... + return 0; + + } + + /* open callback */ + static int snd_mychip_capture_open(struct snd_pcm_substream *substream) + { + struct mychip *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + runtime->hw = snd_mychip_capture_hw; + /* more hardware-initialization will be done here */ + .... + return 0; + } + + /* close callback */ + static int snd_mychip_capture_close(struct snd_pcm_substream *substream) + { + struct mychip *chip = snd_pcm_substream_chip(substream); + /* the hardware-specific codes will be here */ + .... + return 0; + + } + + /* hw_params callback */ + static int snd_mychip_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) + { + return snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + } + + /* hw_free callback */ + static int snd_mychip_pcm_hw_free(struct snd_pcm_substream *substream) + { + return snd_pcm_lib_free_pages(substream); + } + + /* prepare callback */ + static int snd_mychip_pcm_prepare(struct snd_pcm_substream *substream) + { + struct mychip *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + + /* set up the hardware with the current configuration + * for example... + */ + mychip_set_sample_format(chip, runtime->format); + mychip_set_sample_rate(chip, runtime->rate); + mychip_set_channels(chip, runtime->channels); + mychip_set_dma_setup(chip, runtime->dma_addr, + chip->buffer_size, + chip->period_size); + return 0; + } + + /* trigger callback */ + static int snd_mychip_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) + { + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* do something to start the PCM engine */ + .... + break; + case SNDRV_PCM_TRIGGER_STOP: + /* do something to stop the PCM engine */ + .... + break; + default: + return -EINVAL; + } + } + + /* pointer callback */ + static snd_pcm_uframes_t + snd_mychip_pcm_pointer(struct snd_pcm_substream *substream) + { + struct mychip *chip = snd_pcm_substream_chip(substream); + unsigned int current_ptr; + + /* get the current hardware pointer */ + current_ptr = mychip_get_hw_pointer(chip); + return current_ptr; + } + + /* operators */ + static struct snd_pcm_ops snd_mychip_playback_ops = { + .open = snd_mychip_playback_open, + .close = snd_mychip_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_mychip_pcm_hw_params, + .hw_free = snd_mychip_pcm_hw_free, + .prepare = snd_mychip_pcm_prepare, + .trigger = snd_mychip_pcm_trigger, + .pointer = snd_mychip_pcm_pointer, + }; + + /* operators */ + static struct snd_pcm_ops snd_mychip_capture_ops = { + .open = snd_mychip_capture_open, + .close = snd_mychip_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_mychip_pcm_hw_params, + .hw_free = snd_mychip_pcm_hw_free, + .prepare = snd_mychip_pcm_prepare, + .trigger = snd_mychip_pcm_trigger, + .pointer = snd_mychip_pcm_pointer, + }; + + /* + * definitions of capture are omitted here... + */ + + /* create a pcm device */ + static int __devinit snd_mychip_new_pcm(struct mychip *chip) + { + struct snd_pcm *pcm; + int err; + + err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1, &pcm); + if (err < 0) + return err; + pcm->private_data = chip; + strcpy(pcm->name, "My Chip"); + chip->pcm = pcm; + /* set operators */ + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, + &snd_mychip_playback_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, + &snd_mychip_capture_ops); + /* pre-allocation of buffers */ + /* NOTE: this may fail */ + snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data(chip->pci), + 64*1024, 64*1024); + return 0; + } +]]> + + + +
+ +
+ Constructor + + A pcm instance is allocated by the snd_pcm_new() + function. It would be better to create a constructor for pcm, + namely, + + + +card, "My Chip", 0, 1, 1, &pcm); + if (err < 0) + return err; + pcm->private_data = chip; + strcpy(pcm->name, "My Chip"); + chip->pcm = pcm; + .... + return 0; + } +]]> + + + + + + The snd_pcm_new() function takes four + arguments. The first argument is the card pointer to which this + pcm is assigned, and the second is the ID string. + + + + The third argument (index, 0 in the + above) is the index of this new pcm. It begins from zero. If + you create more than one pcm instances, specify the + different numbers in this argument. For example, + index = 1 for the second PCM device. + + + + The fourth and fifth arguments are the number of substreams + for playback and capture, respectively. Here 1 is used for + both arguments. When no playback or capture substreams are available, + pass 0 to the corresponding argument. + + + + If a chip supports multiple playbacks or captures, you can + specify more numbers, but they must be handled properly in + open/close, etc. callbacks. When you need to know which + substream you are referring to, then it can be obtained from + struct snd_pcm_substream data passed to each callback + as follows: + + + +number; +]]> + + + + + + After the pcm is created, you need to set operators for each + pcm stream. + + + + + + + + + + The operators are defined typically like this: + + + + + + + + All the callbacks are described in the + + Operators subsection. + + + + After setting the operators, you probably will want to + pre-allocate the buffer. For the pre-allocation, simply call + the following: + + + +pci), + 64*1024, 64*1024); +]]> + + + + It will allocate a buffer up to 64kB as default. + Buffer management details will be described in the later section Buffer and Memory + Management. + + + + Additionally, you can set some extra information for this pcm + in pcm->info_flags. + The available values are defined as + SNDRV_PCM_INFO_XXX in + <sound/asound.h>, which is used for + the hardware definition (described later). When your soundchip + supports only half-duplex, specify like this: + + + +info_flags = SNDRV_PCM_INFO_HALF_DUPLEX; +]]> + + + +
+ +
+ ... And the Destructor? + + The destructor for a pcm instance is not always + necessary. Since the pcm device will be released by the middle + layer code automatically, you don't have to call the destructor + explicitly. + + + + The destructor would be necessary if you created + special records internally and needed to release them. In such a + case, set the destructor function to + pcm->private_free: + + + PCM Instance with a Destructor + +my_private_pcm_data); + /* do what you like else */ + .... + } + + static int __devinit snd_mychip_new_pcm(struct mychip *chip) + { + struct snd_pcm *pcm; + .... + /* allocate your own data */ + chip->my_private_pcm_data = kmalloc(...); + /* set the destructor */ + pcm->private_data = chip; + pcm->private_free = mychip_pcm_free; + .... + } +]]> + + + +
+ +
+ Runtime Pointer - The Chest of PCM Information + + When the PCM substream is opened, a PCM runtime instance is + allocated and assigned to the substream. This pointer is + accessible via substream->runtime. + This runtime pointer holds most information you need + to control the PCM: the copy of hw_params and sw_params configurations, the buffer + pointers, mmap records, spinlocks, etc. + + + + The definition of runtime instance is found in + <sound/pcm.h>. Here are + the contents of this file: + + + + + + + + + For the operators (callbacks) of each sound driver, most of + these records are supposed to be read-only. Only the PCM + middle-layer changes / updates them. The exceptions are + the hardware description (hw), interrupt callbacks + (transfer_ack_xxx), DMA buffer information, and the private + data. Besides, if you use the standard buffer allocation + method via snd_pcm_lib_malloc_pages(), + you don't need to set the DMA buffer information by yourself. + + + + In the sections below, important records are explained. + + +
+ Hardware Description + + The hardware descriptor (struct snd_pcm_hardware) + contains the definitions of the fundamental hardware + configuration. Above all, you'll need to define this in + + the open callback. + Note that the runtime instance holds the copy of the + descriptor, not the pointer to the existing descriptor. That + is, in the open callback, you can modify the copied descriptor + (runtime->hw) as you need. For example, if the maximum + number of channels is 1 only on some chip models, you can + still use the same hardware descriptor and change the + channels_max later: + + +runtime; + ... + runtime->hw = snd_mychip_playback_hw; /* common definition */ + if (chip->model == VERY_OLD_ONE) + runtime->hw.channels_max = 1; +]]> + + + + + + Typically, you'll have a hardware descriptor as below: + + + + + + + + + + + The info field contains the type and + capabilities of this pcm. The bit flags are defined in + <sound/asound.h> as + SNDRV_PCM_INFO_XXX. Here, at least, you + have to specify whether the mmap is supported and which + interleaved format is supported. + When the is supported, add the + SNDRV_PCM_INFO_MMAP flag here. When the + hardware supports the interleaved or the non-interleaved + formats, SNDRV_PCM_INFO_INTERLEAVED or + SNDRV_PCM_INFO_NONINTERLEAVED flag must + be set, respectively. If both are supported, you can set both, + too. + + + + In the above example, MMAP_VALID and + BLOCK_TRANSFER are specified for the OSS mmap + mode. Usually both are set. Of course, + MMAP_VALID is set only if the mmap is + really supported. + + + + The other possible flags are + SNDRV_PCM_INFO_PAUSE and + SNDRV_PCM_INFO_RESUME. The + PAUSE bit means that the pcm supports the + pause operation, while the + RESUME bit means that the pcm supports + the full suspend/resume operation. + If the PAUSE flag is set, + the trigger callback below + must handle the corresponding (pause push/release) commands. + The suspend/resume trigger commands can be defined even without + the RESUME flag. See + Power Management section for details. + + + + When the PCM substreams can be synchronized (typically, + synchronized start/stop of a playback and a capture streams), + you can give SNDRV_PCM_INFO_SYNC_START, + too. In this case, you'll need to check the linked-list of + PCM substreams in the trigger callback. This will be + described in the later section. + + + + + + formats field contains the bit-flags + of supported formats (SNDRV_PCM_FMTBIT_XXX). + If the hardware supports more than one format, give all or'ed + bits. In the example above, the signed 16bit little-endian + format is specified. + + + + + + rates field contains the bit-flags of + supported rates (SNDRV_PCM_RATE_XXX). + When the chip supports continuous rates, pass + CONTINUOUS bit additionally. + The pre-defined rate bits are provided only for typical + rates. If your chip supports unconventional rates, you need to add + the KNOT bit and set up the hardware + constraint manually (explained later). + + + + + + rate_min and + rate_max define the minimum and + maximum sample rate. This should correspond somehow to + rates bits. + + + + + + channel_min and + channel_max + define, as you might already expected, the minimum and maximum + number of channels. + + + + + + buffer_bytes_max defines the + maximum buffer size in bytes. There is no + buffer_bytes_min field, since + it can be calculated from the minimum period size and the + minimum number of periods. + Meanwhile, period_bytes_min and + define the minimum and maximum size of the period in bytes. + periods_max and + periods_min define the maximum and + minimum number of periods in the buffer. + + + + The period is a term that corresponds to + a fragment in the OSS world. The period defines the size at + which a PCM interrupt is generated. This size strongly + depends on the hardware. + Generally, the smaller period size will give you more + interrupts, that is, more controls. + In the case of capture, this size defines the input latency. + On the other hand, the whole buffer size defines the + output latency for the playback direction. + + + + + + There is also a field fifo_size. + This specifies the size of the hardware FIFO, but currently it + is neither used in the driver nor in the alsa-lib. So, you + can ignore this field. + + + + +
+ +
+ PCM Configurations + + Ok, let's go back again to the PCM runtime records. + The most frequently referred records in the runtime instance are + the PCM configurations. + The PCM configurations are stored in the runtime instance + after the application sends hw_params data via + alsa-lib. There are many fields copied from hw_params and + sw_params structs. For example, + format holds the format type + chosen by the application. This field contains the enum value + SNDRV_PCM_FORMAT_XXX. + + + + One thing to be noted is that the configured buffer and period + sizes are stored in frames in the runtime. + In the ALSA world, 1 frame = channels * samples-size. + For conversion between frames and bytes, you can use the + frames_to_bytes() and + bytes_to_frames() helper functions. + + +period_size); +]]> + + + + + + Also, many software parameters (sw_params) are + stored in frames, too. Please check the type of the field. + snd_pcm_uframes_t is for the frames as unsigned + integer while snd_pcm_sframes_t is for the frames + as signed integer. + +
+ +
+ DMA Buffer Information + + The DMA buffer is defined by the following four fields, + dma_area, + dma_addr, + dma_bytes and + dma_private. + The dma_area holds the buffer + pointer (the logical address). You can call + memcpy from/to + this pointer. Meanwhile, dma_addr + holds the physical address of the buffer. This field is + specified only when the buffer is a linear buffer. + dma_bytes holds the size of buffer + in bytes. dma_private is used for + the ALSA DMA allocator. + + + + If you use a standard ALSA function, + snd_pcm_lib_malloc_pages(), for + allocating the buffer, these fields are set by the ALSA middle + layer, and you should not change them by + yourself. You can read them but not write them. + On the other hand, if you want to allocate the buffer by + yourself, you'll need to manage it in hw_params callback. + At least, dma_bytes is mandatory. + dma_area is necessary when the + buffer is mmapped. If your driver doesn't support mmap, this + field is not necessary. dma_addr + is also optional. You can use + dma_private as you like, too. + +
+ +
+ Running Status + + The running status can be referred via runtime->status. + This is the pointer to the struct snd_pcm_mmap_status + record. For example, you can get the current DMA hardware + pointer via runtime->status->hw_ptr. + + + + The DMA application pointer can be referred via + runtime->control, which points to the + struct snd_pcm_mmap_control record. + However, accessing directly to this value is not recommended. + +
+ +
+ Private Data + + You can allocate a record for the substream and store it in + runtime->private_data. Usually, this + is done in + + the open callback. + Don't mix this with pcm->private_data. + The pcm->private_data usually points to the + chip instance assigned statically at the creation of PCM, while the + runtime->private_data points to a dynamic + data structure created at the PCM open callback. + + + +runtime->private_data = data; + .... + } +]]> + + + + + + The allocated object must be released in + + the close callback. + +
+ +
+ Interrupt Callbacks + + The field transfer_ack_begin and + transfer_ack_end are called at + the beginning and at the end of + snd_pcm_period_elapsed(), respectively. + +
+ +
+ +
+ Operators + + OK, now let me give details about each pcm callback + (ops). In general, every callback must + return 0 if successful, or a negative error number + such as -EINVAL. To choose an appropriate + error number, it is advised to check what value other parts of + the kernel return when the same kind of request fails. + + + + The callback function takes at least the argument with + snd_pcm_substream pointer. To retrieve + the chip record from the given substream instance, you can use the + following macro. + + + + + + + + The macro reads substream->private_data, + which is a copy of pcm->private_data. + You can override the former if you need to assign different data + records per PCM substream. For example, the cmi8330 driver assigns + different private_data for playback and capture directions, + because it uses two different codecs (SB- and AD-compatible) for + different directions. + + +
+ open callback + + + + + + + + This is called when a pcm substream is opened. + + + + At least, here you have to initialize the runtime->hw + record. Typically, this is done by like this: + + + +runtime; + + runtime->hw = snd_mychip_playback_hw; + return 0; + } +]]> + + + + where snd_mychip_playback_hw is the + pre-defined hardware description. + + + + You can allocate a private data in this callback, as described + in + Private Data section. + + + + If the hardware configuration needs more constraints, set the + hardware constraints here, too. + See + Constraints for more details. + +
+ +
+ close callback + + + + + + + + Obviously, this is called when a pcm substream is closed. + + + + Any private instance for a pcm substream allocated in the + open callback will be released here. + + + +runtime->private_data); + .... + } +]]> + + + +
+ +
+ ioctl callback + + This is used for any special call to pcm ioctls. But + usually you can pass a generic ioctl callback, + snd_pcm_lib_ioctl. + +
+ +
+ hw_params callback + + + + + + + + + + This is called when the hardware parameter + (hw_params) is set + up by the application, + that is, once when the buffer size, the period size, the + format, etc. are defined for the pcm substream. + + + + Many hardware setups should be done in this callback, + including the allocation of buffers. + + + + Parameters to be initialized are retrieved by + params_xxx() macros. To allocate + buffer, you can call a helper function, + + + + + + + + snd_pcm_lib_malloc_pages() is available + only when the DMA buffers have been pre-allocated. + See the section + Buffer Types for more details. + + + + Note that this and prepare callbacks + may be called multiple times per initialization. + For example, the OSS emulation may + call these callbacks at each change via its ioctl. + + + + Thus, you need to be careful not to allocate the same buffers + many times, which will lead to memory leaks! Calling the + helper function above many times is OK. It will release the + previous buffer automatically when it was already allocated. + + + + Another note is that this callback is non-atomic + (schedulable). This is important, because the + trigger callback + is atomic (non-schedulable). That is, mutexes or any + schedule-related functions are not available in + trigger callback. + Please see the subsection + + Atomicity for details. + +
+ +
+ hw_free callback + + + + + + + + + + This is called to release the resources allocated via + hw_params. For example, releasing the + buffer via + snd_pcm_lib_malloc_pages() is done by + calling the following: + + + + + + + + + + This function is always called before the close callback is called. + Also, the callback may be called multiple times, too. + Keep track whether the resource was already released. + +
+ +
+ prepare callback + + + + + + + + + + This callback is called when the pcm is + prepared. You can set the format type, sample + rate, etc. here. The difference from + hw_params is that the + prepare callback will be called each + time + snd_pcm_prepare() is called, i.e. when + recovering after underruns, etc. + + + + Note that this callback is now non-atomic. + You can use schedule-related functions safely in this callback. + + + + In this and the following callbacks, you can refer to the + values via the runtime record, + substream->runtime. + For example, to get the current + rate, format or channels, access to + runtime->rate, + runtime->format or + runtime->channels, respectively. + The physical address of the allocated buffer is set to + runtime->dma_area. The buffer and period sizes are + in runtime->buffer_size and runtime->period_size, + respectively. + + + + Be careful that this callback will be called many times at + each setup, too. + +
+ +
+ trigger callback + + + + + + + + This is called when the pcm is started, stopped or paused. + + + + Which action is specified in the second argument, + SNDRV_PCM_TRIGGER_XXX in + <sound/pcm.h>. At least, + the START and STOP + commands must be defined in this callback. + + + + + + + + + + When the pcm supports the pause operation (given in the info + field of the hardware table), the PAUSE_PUSE + and PAUSE_RELEASE commands must be + handled here, too. The former is the command to pause the pcm, + and the latter to restart the pcm again. + + + + When the pcm supports the suspend/resume operation, + regardless of full or partial suspend/resume support, + the SUSPEND and RESUME + commands must be handled, too. + These commands are issued when the power-management status is + changed. Obviously, the SUSPEND and + RESUME commands + suspend and resume the pcm substream, and usually, they + are identical to the STOP and + START commands, respectively. + See the + Power Management section for details. + + + + As mentioned, this callback is atomic. You cannot call + functions which may sleep. + The trigger callback should be as minimal as possible, + just really triggering the DMA. The other stuff should be + initialized hw_params and prepare callbacks properly + beforehand. + +
+ +
+ pointer callback + + + + + + + + This callback is called when the PCM middle layer inquires + the current hardware position on the buffer. The position must + be returned in frames, + ranging from 0 to buffer_size - 1. + + + + This is called usually from the buffer-update routine in the + pcm middle layer, which is invoked when + snd_pcm_period_elapsed() is called in the + interrupt routine. Then the pcm middle layer updates the + position and calculates the available space, and wakes up the + sleeping poll threads, etc. + + + + This callback is also atomic. + +
+ +
+ copy and silence callbacks + + These callbacks are not mandatory, and can be omitted in + most cases. These callbacks are used when the hardware buffer + cannot be in the normal memory space. Some chips have their + own buffer on the hardware which is not mappable. In such a + case, you have to transfer the data manually from the memory + buffer to the hardware buffer. Or, if the buffer is + non-contiguous on both physical and virtual memory spaces, + these callbacks must be defined, too. + + + + If these two callbacks are defined, copy and set-silence + operations are done by them. The detailed will be described in + the later section Buffer and Memory + Management. + +
+ +
+ ack callback + + This callback is also not mandatory. This callback is called + when the appl_ptr is updated in read or write operations. + Some drivers like emu10k1-fx and cs46xx need to track the + current appl_ptr for the internal buffer, and this callback + is useful only for such a purpose. + + + This callback is atomic. + +
+ +
+ page callback + + + This callback is optional too. This callback is used + mainly for non-contiguous buffers. The mmap calls this + callback to get the page address. Some examples will be + explained in the later section Buffer and Memory + Management, too. + +
+
+ +
+ Interrupt Handler + + The rest of pcm stuff is the PCM interrupt handler. The + role of PCM interrupt handler in the sound driver is to update + the buffer position and to tell the PCM middle layer when the + buffer position goes across the prescribed period size. To + inform this, call the snd_pcm_period_elapsed() + function. + + + + There are several types of sound chips to generate the interrupts. + + +
+ Interrupts at the period (fragment) boundary + + This is the most frequently found type: the hardware + generates an interrupt at each period boundary. + In this case, you can call + snd_pcm_period_elapsed() at each + interrupt. + + + + snd_pcm_period_elapsed() takes the + substream pointer as its argument. Thus, you need to keep the + substream pointer accessible from the chip instance. For + example, define substream field in the chip record to hold the + current running substream pointer, and set the pointer value + at open callback (and reset at close callback). + + + + If you acquire a spinlock in the interrupt handler, and the + lock is used in other pcm callbacks, too, then you have to + release the lock before calling + snd_pcm_period_elapsed(), because + snd_pcm_period_elapsed() calls other pcm + callbacks inside. + + + + Typical code would be like: + + + Interrupt Handler Case #1 + +lock); + .... + if (pcm_irq_invoked(chip)) { + /* call updater, unlock before it */ + spin_unlock(&chip->lock); + snd_pcm_period_elapsed(chip->substream); + spin_lock(&chip->lock); + /* acknowledge the interrupt if necessary */ + } + .... + spin_unlock(&chip->lock); + return IRQ_HANDLED; + } +]]> + + + +
+ +
+ High frequency timer interrupts + + This happense when the hardware doesn't generate interrupts + at the period boundary but issues timer interrupts at a fixed + timer rate (e.g. es1968 or ymfpci drivers). + In this case, you need to check the current hardware + position and accumulate the processed sample length at each + interrupt. When the accumulated size exceeds the period + size, call + snd_pcm_period_elapsed() and reset the + accumulator. + + + + Typical code would be like the following. + + + Interrupt Handler Case #2 + +lock); + .... + if (pcm_irq_invoked(chip)) { + unsigned int last_ptr, size; + /* get the current hardware pointer (in frames) */ + last_ptr = get_hw_ptr(chip); + /* calculate the processed frames since the + * last update + */ + if (last_ptr < chip->last_ptr) + size = runtime->buffer_size + last_ptr + - chip->last_ptr; + else + size = last_ptr - chip->last_ptr; + /* remember the last updated point */ + chip->last_ptr = last_ptr; + /* accumulate the size */ + chip->size += size; + /* over the period boundary? */ + if (chip->size >= runtime->period_size) { + /* reset the accumulator */ + chip->size %= runtime->period_size; + /* call updater */ + spin_unlock(&chip->lock); + snd_pcm_period_elapsed(substream); + spin_lock(&chip->lock); + } + /* acknowledge the interrupt if necessary */ + } + .... + spin_unlock(&chip->lock); + return IRQ_HANDLED; + } +]]> + + + +
+ +
+ On calling <function>snd_pcm_period_elapsed()</function> + + In both cases, even if more than one period are elapsed, you + don't have to call + snd_pcm_period_elapsed() many times. Call + only once. And the pcm layer will check the current hardware + pointer and update to the latest status. + +
+
+ +
+ Atomicity + + One of the most important (and thus difficult to debug) problems + in kernel programming are race conditions. + In the Linux kernel, they are usually avoided via spin-locks, mutexes + or semaphores. In general, if a race condition can happen + in an interrupt handler, it has to be managed atomically, and you + have to use a spinlock to protect the critical session. If the + critical section is not in interrupt handler code and + if taking a relatively long time to execute is acceptable, you + should use mutexes or semaphores instead. + + + + As already seen, some pcm callbacks are atomic and some are + not. For example, the hw_params callback is + non-atomic, while trigger callback is + atomic. This means, the latter is called already in a spinlock + held by the PCM middle layer. Please take this atomicity into + account when you choose a locking scheme in the callbacks. + + + + In the atomic callbacks, you cannot use functions which may call + schedule or go to + sleep. Semaphores and mutexes can sleep, + and hence they cannot be used inside the atomic callbacks + (e.g. trigger callback). + To implement some delay in such a callback, please use + udelay() or mdelay(). + + + + All three atomic callbacks (trigger, pointer, and ack) are + called with local interrupts disabled. + + +
+
+ Constraints + + If your chip supports unconventional sample rates, or only the + limited samples, you need to set a constraint for the + condition. + + + + For example, in order to restrict the sample rates in the some + supported values, use + snd_pcm_hw_constraint_list(). + You need to call this function in the open callback. + + + Example of Hardware Constraints + +runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &constraints_rates); + if (err < 0) + return err; + .... + } +]]> + + + + + + There are many different constraints. + Look at sound/pcm.h for a complete list. + You can even define your own constraint rules. + For example, let's suppose my_chip can manage a substream of 1 channel + if and only if the format is S16_LE, otherwise it supports any format + specified in the snd_pcm_hardware structure (or in any + other constraint_list). You can build a rule like this: + + + Example of Hardware Constraints for Channels + +min < 2) { + fmt.bits[0] &= SNDRV_PCM_FMTBIT_S16_LE; + return snd_mask_refine(f, &fmt); + } + return 0; + } +]]> + + + + + + Then you need to call this function to add your rule: + + + +runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, + hw_rule_channels_by_format, 0, SNDRV_PCM_HW_PARAM_FORMAT, + -1); +]]> + + + + + + The rule function is called when an application sets the number of + channels. But an application can set the format before the number of + channels. Thus you also need to define the inverse rule: + + + Example of Hardware Constraints for Channels + +bits[0] == SNDRV_PCM_FMTBIT_S16_LE) { + ch.min = ch.max = 1; + ch.integer = 1; + return snd_interval_refine(c, &ch); + } + return 0; + } +]]> + + + + + + ...and in the open callback: + + +runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, + hw_rule_format_by_channels, 0, SNDRV_PCM_HW_PARAM_CHANNELS, + -1); +]]> + + + + + + I won't give more details here, rather I + would like to say, Luke, use the source. + +
+ + + + + + + + + Control Interface + +
+ General + + The control interface is used widely for many switches, + sliders, etc. which are accessed from user-space. Its most + important use is the mixer interface. In other words, since ALSA + 0.9.x, all the mixer stuff is implemented on the control kernel API. + + + + ALSA has a well-defined AC97 control module. If your chip + supports only the AC97 and nothing else, you can skip this + section. + + + + The control API is defined in + <sound/control.h>. + Include this file if you want to add your own controls. + +
+ +
+ Definition of Controls + + To create a new control, you need to define the + following three + callbacks: info, + get and + put. Then, define a + struct snd_kcontrol_new record, such as: + + + Definition of a Control + + + + + + + + Most likely the control is created via + snd_ctl_new1(), and in such a case, you can + add the __devinitdata prefix to the + definition as above. + + + + The iface field specifies the control + type, SNDRV_CTL_ELEM_IFACE_XXX, which + is usually MIXER. + Use CARD for global controls that are not + logically part of the mixer. + If the control is closely associated with some specific device on + the sound card, use HWDEP, + PCM, RAWMIDI, + TIMER, or SEQUENCER, and + specify the device number with the + device and + subdevice fields. + + + + The name is the name identifier + string. Since ALSA 0.9.x, the control name is very important, + because its role is classified from its name. There are + pre-defined standard control names. The details are described in + the + Control Names subsection. + + + + The index field holds the index number + of this control. If there are several different controls with + the same name, they can be distinguished by the index + number. This is the case when + several codecs exist on the card. If the index is zero, you can + omit the definition above. + + + + The access field contains the access + type of this control. Give the combination of bit masks, + SNDRV_CTL_ELEM_ACCESS_XXX, there. + The details will be explained in + the + Access Flags subsection. + + + + The private_value field contains + an arbitrary long integer value for this record. When using + the generic info, + get and + put callbacks, you can pass a value + through this field. If several small numbers are necessary, you can + combine them in bitwise. Or, it's possible to give a pointer + (casted to unsigned long) of some record to this field, too. + + + + The tlv field can be used to provide + metadata about the control; see the + + Metadata subsection. + + + + The other three are + + callback functions. + +
+ +
+ Control Names + + There are some standards to define the control names. A + control is usually defined from the three parts as + SOURCE DIRECTION FUNCTION. + + + + The first, SOURCE, specifies the source + of the control, and is a string such as Master, + PCM, CD and + Line. There are many pre-defined sources. + + + + The second, DIRECTION, is one of the + following strings according to the direction of the control: + Playback, Capture, Bypass + Playback and Bypass Capture. Or, it can + be omitted, meaning both playback and capture directions. + + + + The third, FUNCTION, is one of the + following strings according to the function of the control: + Switch, Volume and + Route. + + + + The example of control names are, thus, Master Capture + Switch or PCM Playback Volume. + + + + There are some exceptions: + + +
+ Global capture and playback + + Capture Source, Capture Switch + and Capture Volume are used for the global + capture (input) source, switch and volume. Similarly, + Playback Switch and Playback + Volume are used for the global output gain switch and + volume. + +
+ +
+ Tone-controls + + tone-control switch and volumes are specified like + Tone Control - XXX, e.g. Tone Control - + Switch, Tone Control - Bass, + Tone Control - Center. + +
+ +
+ 3D controls + + 3D-control switches and volumes are specified like 3D + Control - XXX, e.g. 3D Control - + Switch, 3D Control - Center, 3D + Control - Space. + +
+ +
+ Mic boost + + Mic-boost switch is set as Mic Boost or + Mic Boost (6dB). + + + + More precise information can be found in + Documentation/sound/alsa/ControlNames.txt. + +
+
+ +
+ Access Flags + + + The access flag is the bitmask which specifies the access type + of the given control. The default access type is + SNDRV_CTL_ELEM_ACCESS_READWRITE, + which means both read and write are allowed to this control. + When the access flag is omitted (i.e. = 0), it is + considered as READWRITE access as default. + + + + When the control is read-only, pass + SNDRV_CTL_ELEM_ACCESS_READ instead. + In this case, you don't have to define + the put callback. + Similarly, when the control is write-only (although it's a rare + case), you can use the WRITE flag instead, and + you don't need the get callback. + + + + If the control value changes frequently (e.g. the VU meter), + VOLATILE flag should be given. This means + that the control may be changed without + + notification. Applications should poll such + a control constantly. + + + + When the control is inactive, set + the INACTIVE flag, too. + There are LOCK and + OWNER flags to change the write + permissions. + + +
+ +
+ Callbacks + +
+ info callback + + The info callback is used to get + detailed information on this control. This must store the + values of the given struct snd_ctl_elem_info + object. For example, for a boolean control with a single + element: + + + Example of info callback + +type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; + } +]]> + + + + + + The type field specifies the type + of the control. There are BOOLEAN, + INTEGER, ENUMERATED, + BYTES, IEC958 and + INTEGER64. The + count field specifies the + number of elements in this control. For example, a stereo + volume would have count = 2. The + value field is a union, and + the values stored are depending on the type. The boolean and + integer types are identical. + + + + The enumerated type is a bit different from others. You'll + need to set the string for the currently given item index. + + + +type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 4; + if (uinfo->value.enumerated.item > 3) + uinfo->value.enumerated.item = 3; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; + } +]]> + + + + + + Some common info callbacks are available for your convenience: + snd_ctl_boolean_mono_info() and + snd_ctl_boolean_stereo_info(). + Obviously, the former is an info callback for a mono channel + boolean item, just like snd_myctl_mono_info + above, and the latter is for a stereo channel boolean item. + + +
+ +
+ get callback + + + This callback is used to read the current value of the + control and to return to user-space. + + + + For example, + + + Example of get callback + +value.integer.value[0] = get_some_value(chip); + return 0; + } +]]> + + + + + + The value field depends on + the type of control as well as on the info callback. For example, + the sb driver uses this field to store the register offset, + the bit-shift and the bit-mask. The + private_value field is set as follows: + + + + + + and is retrieved in callbacks like + + +private_value & 0xff; + int shift = (kcontrol->private_value >> 16) & 0xff; + int mask = (kcontrol->private_value >> 24) & 0xff; + .... + } +]]> + + + + + + In the get callback, + you have to fill all the elements if the + control has more than one elements, + i.e. count > 1. + In the example above, we filled only one element + (value.integer.value[0]) since it's + assumed as count = 1. + +
+ +
+ put callback + + + This callback is used to write a value from user-space. + + + + For example, + + + Example of put callback + +current_value != + ucontrol->value.integer.value[0]) { + change_current_value(chip, + ucontrol->value.integer.value[0]); + changed = 1; + } + return changed; + } +]]> + + + + As seen above, you have to return 1 if the value is + changed. If the value is not changed, return 0 instead. + If any fatal error happens, return a negative error code as + usual. + + + + As in the get callback, + when the control has more than one elements, + all elements must be evaluated in this callback, too. + +
+ +
+ Callbacks are not atomic + + All these three callbacks are basically not atomic. + +
+
+ +
+ Constructor + + When everything is ready, finally we can create a new + control. To create a control, there are two functions to be + called, snd_ctl_new1() and + snd_ctl_add(). + + + + In the simplest way, you can do like this: + + + + + + + + where my_control is the + struct snd_kcontrol_new object defined above, and chip + is the object pointer to be passed to + kcontrol->private_data + which can be referred to in callbacks. + + + + snd_ctl_new1() allocates a new + snd_kcontrol instance (that's why the definition + of my_control can be with + the __devinitdata + prefix), and snd_ctl_add assigns the given + control component to the card. + +
+ +
+ Change Notification + + If you need to change and update a control in the interrupt + routine, you can call snd_ctl_notify(). For + example, + + + + + + + + This function takes the card pointer, the event-mask, and the + control id pointer for the notification. The event-mask + specifies the types of notification, for example, in the above + example, the change of control values is notified. + The id pointer is the pointer of struct snd_ctl_elem_id + to be notified. + You can find some examples in es1938.c or + es1968.c for hardware volume interrupts. + +
+ +
+ Metadata + + To provide information about the dB values of a mixer control, use + on of the DECLARE_TLV_xxx macros from + <sound/tlv.h> to define a variable + containing this information, set thetlv.p + field to point to this variable, and include the + SNDRV_CTL_ELEM_ACCESS_TLV_READ flag in the + access field; like this: + + + + + + + + + The DECLARE_TLV_DB_SCALE macro defines + information about a mixer control where each step in the control's + value changes the dB value by a constant dB amount. + The first parameter is the name of the variable to be defined. + The second parameter is the minimum value, in units of 0.01 dB. + The third parameter is the step size, in units of 0.01 dB. + Set the fourth parameter to 1 if the minimum value actually mutes + the control. + + + + The DECLARE_TLV_DB_LINEAR macro defines + information about a mixer control where the control's value affects + the output linearly. + The first parameter is the name of the variable to be defined. + The second parameter is the minimum value, in units of 0.01 dB. + The third parameter is the maximum value, in units of 0.01 dB. + If the minimum value mutes the control, set the second parameter to + TLV_DB_GAIN_MUTE. + +
+ + + + + + + + + API for AC97 Codec + +
+ General + + The ALSA AC97 codec layer is a well-defined one, and you don't + have to write much code to control it. Only low-level control + routines are necessary. The AC97 codec API is defined in + <sound/ac97_codec.h>. + +
+ +
+ Full Code Example + + + Example of AC97 Interface + +private_data; + .... + /* read a register value here from the codec */ + return the_register_value; + } + + static void snd_mychip_ac97_write(struct snd_ac97 *ac97, + unsigned short reg, unsigned short val) + { + struct mychip *chip = ac97->private_data; + .... + /* write the given register value to the codec */ + } + + static int snd_mychip_ac97(struct mychip *chip) + { + struct snd_ac97_bus *bus; + struct snd_ac97_template ac97; + int err; + static struct snd_ac97_bus_ops ops = { + .write = snd_mychip_ac97_write, + .read = snd_mychip_ac97_read, + }; + + err = snd_ac97_bus(chip->card, 0, &ops, NULL, &bus); + if (err < 0) + return err; + memset(&ac97, 0, sizeof(ac97)); + ac97.private_data = chip; + return snd_ac97_mixer(bus, &ac97, &chip->ac97); + } + +]]> + + + +
+ +
+ Constructor + + To create an ac97 instance, first call snd_ac97_bus + with an ac97_bus_ops_t record with callback functions. + + + + + + + + The bus record is shared among all belonging ac97 instances. + + + + And then call snd_ac97_mixer() with an + struct snd_ac97_template + record together with the bus pointer created above. + + + +ac97); +]]> + + + + where chip->ac97 is a pointer to a newly created + ac97_t instance. + In this case, the chip pointer is set as the private data, so that + the read/write callback functions can refer to this chip instance. + This instance is not necessarily stored in the chip + record. If you need to change the register values from the + driver, or need the suspend/resume of ac97 codecs, keep this + pointer to pass to the corresponding functions. + +
+ +
+ Callbacks + + The standard callbacks are read and + write. Obviously they + correspond to the functions for read and write accesses to the + hardware low-level codes. + + + + The read callback returns the + register value specified in the argument. + + + +private_data; + .... + return the_register_value; + } +]]> + + + + Here, the chip can be cast from ac97->private_data. + + + + Meanwhile, the write callback is + used to set the register value. + + + + + + + + + + These callbacks are non-atomic like the control API callbacks. + + + + There are also other callbacks: + reset, + wait and + init. + + + + The reset callback is used to reset + the codec. If the chip requires a special kind of reset, you can + define this callback. + + + + The wait callback is used to + add some waiting time in the standard initialization of the codec. If the + chip requires the extra waiting time, define this callback. + + + + The init callback is used for + additional initialization of the codec. + +
+ +
+ Updating Registers in The Driver + + If you need to access to the codec from the driver, you can + call the following functions: + snd_ac97_write(), + snd_ac97_read(), + snd_ac97_update() and + snd_ac97_update_bits(). + + + + Both snd_ac97_write() and + snd_ac97_update() functions are used to + set a value to the given register + (AC97_XXX). The difference between them is + that snd_ac97_update() doesn't write a + value if the given value has been already set, while + snd_ac97_write() always rewrites the + value. + + + + + + + + + + snd_ac97_read() is used to read the value + of the given register. For example, + + + + + + + + + + snd_ac97_update_bits() is used to update + some bits in the given register. + + + + + + + + + + Also, there is a function to change the sample rate (of a + given register such as + AC97_PCM_FRONT_DAC_RATE) when VRA or + DRA is supported by the codec: + snd_ac97_set_rate(). + + + + + + + + + + The following registers are available to set the rate: + AC97_PCM_MIC_ADC_RATE, + AC97_PCM_FRONT_DAC_RATE, + AC97_PCM_LR_ADC_RATE, + AC97_SPDIF. When + AC97_SPDIF is specified, the register is + not really changed but the corresponding IEC958 status bits will + be updated. + +
+ +
+ Clock Adjustment + + In some chips, the clock of the codec isn't 48000 but using a + PCI clock (to save a quartz!). In this case, change the field + bus->clock to the corresponding + value. For example, intel8x0 + and es1968 drivers have their own function to read from the clock. + +
+ +
+ Proc Files + + The ALSA AC97 interface will create a proc file such as + /proc/asound/card0/codec97#0/ac97#0-0 and + ac97#0-0+regs. You can refer to these files to + see the current status and registers of the codec. + +
+ +
+ Multiple Codecs + + When there are several codecs on the same card, you need to + call snd_ac97_mixer() multiple times with + ac97.num=1 or greater. The num field + specifies the codec number. + + + + If you set up multiple codecs, you either need to write + different callbacks for each codec or check + ac97->num in the callback routines. + +
+ + + + + + + + + MIDI (MPU401-UART) Interface + +
+ General + + Many soundcards have built-in MIDI (MPU401-UART) + interfaces. When the soundcard supports the standard MPU401-UART + interface, most likely you can use the ALSA MPU401-UART API. The + MPU401-UART API is defined in + <sound/mpu401.h>. + + + + Some soundchips have a similar but slightly different + implementation of mpu401 stuff. For example, emu10k1 has its own + mpu401 routines. + +
+ +
+ Constructor + + To create a rawmidi object, call + snd_mpu401_uart_new(). + + + + + + + + + + The first argument is the card pointer, and the second is the + index of this component. You can create up to 8 rawmidi + devices. + + + + The third argument is the type of the hardware, + MPU401_HW_XXX. If it's not a special one, + you can use MPU401_HW_MPU401. + + + + The 4th argument is the I/O port address. Many + backward-compatible MPU401 have an I/O port such as 0x330. Or, it + might be a part of its own PCI I/O region. It depends on the + chip design. + + + + The 5th argument is a bitflag for additional information. + When the I/O port address above is part of the PCI I/O + region, the MPU401 I/O port might have been already allocated + (reserved) by the driver itself. In such a case, pass a bit flag + MPU401_INFO_INTEGRATED, + and the mpu401-uart layer will allocate the I/O ports by itself. + + + + When the controller supports only the input or output MIDI stream, + pass the MPU401_INFO_INPUT or + MPU401_INFO_OUTPUT bitflag, respectively. + Then the rawmidi instance is created as a single stream. + + + + MPU401_INFO_MMIO bitflag is used to change + the access method to MMIO (via readb and writeb) instead of + iob and outb. In this case, you have to pass the iomapped address + to snd_mpu401_uart_new(). + + + + When MPU401_INFO_TX_IRQ is set, the output + stream isn't checked in the default interrupt handler. The driver + needs to call snd_mpu401_uart_interrupt_tx() + by itself to start processing the output stream in the irq handler. + + + + Usually, the port address corresponds to the command port and + port + 1 corresponds to the data port. If not, you may change + the cport field of + struct snd_mpu401 manually + afterward. However, snd_mpu401 pointer is not + returned explicitly by + snd_mpu401_uart_new(). You need to cast + rmidi->private_data to + snd_mpu401 explicitly, + + + +private_data; +]]> + + + + and reset the cport as you like: + + + +cport = my_own_control_port; +]]> + + + + + + The 6th argument specifies the irq number for UART. If the irq + is already allocated, pass 0 to the 7th argument + (irq_flags). Otherwise, pass the flags + for irq allocation + (SA_XXX bits) to it, and the irq will be + reserved by the mpu401-uart layer. If the card doesn't generate + UART interrupts, pass -1 as the irq number. Then a timer + interrupt will be invoked for polling. + +
+ +
+ Interrupt Handler + + When the interrupt is allocated in + snd_mpu401_uart_new(), the private + interrupt handler is used, hence you don't have anything else to do + than creating the mpu401 stuff. Otherwise, you have to call + snd_mpu401_uart_interrupt() explicitly when + a UART interrupt is invoked and checked in your own interrupt + handler. + + + + In this case, you need to pass the private_data of the + returned rawmidi object from + snd_mpu401_uart_new() as the second + argument of snd_mpu401_uart_interrupt(). + + + +private_data, regs); +]]> + + + +
+ + + + + + + + + RawMIDI Interface + +
+ Overview + + + The raw MIDI interface is used for hardware MIDI ports that can + be accessed as a byte stream. It is not used for synthesizer + chips that do not directly understand MIDI. + + + + ALSA handles file and buffer management. All you have to do is + to write some code to move data between the buffer and the + hardware. + + + + The rawmidi API is defined in + <sound/rawmidi.h>. + +
+ +
+ Constructor + + + To create a rawmidi device, call the + snd_rawmidi_new function: + + +card, "MyMIDI", 0, outs, ins, &rmidi); + if (err < 0) + return err; + rmidi->private_data = chip; + strcpy(rmidi->name, "My MIDI"); + rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | + SNDRV_RAWMIDI_INFO_INPUT | + SNDRV_RAWMIDI_INFO_DUPLEX; +]]> + + + + + + The first argument is the card pointer, the second argument is + the ID string. + + + + The third argument is the index of this component. You can + create up to 8 rawmidi devices. + + + + The fourth and fifth arguments are the number of output and + input substreams, respectively, of this device (a substream is + the equivalent of a MIDI port). + + + + Set the info_flags field to specify + the capabilities of the device. + Set SNDRV_RAWMIDI_INFO_OUTPUT if there is + at least one output port, + SNDRV_RAWMIDI_INFO_INPUT if there is at + least one input port, + and SNDRV_RAWMIDI_INFO_DUPLEX if the device + can handle output and input at the same time. + + + + After the rawmidi device is created, you need to set the + operators (callbacks) for each substream. There are helper + functions to set the operators for all the substreams of a device: + + + + + + + + + The operators are usually defined like this: + + + + + + These callbacks are explained in the Callbacks + section. + + + + If there are more than one substream, you should give a + unique name to each of them: + + +streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams, + list { + sprintf(substream->name, "My MIDI Port %d", substream->number + 1); + } + /* same for SNDRV_RAWMIDI_STREAM_INPUT */ +]]> + + + +
+ +
+ Callbacks + + + In all the callbacks, the private data that you've set for the + rawmidi device can be accessed as + substream->rmidi->private_data. + + + + + If there is more than one port, your callbacks can determine the + port index from the struct snd_rawmidi_substream data passed to each + callback: + + +number; +]]> + + + + +
+ <function>open</function> callback + + + + + + + + + This is called when a substream is opened. + You can initialize the hardware here, but you shouldn't + start transmitting/receiving data yet. + +
+ +
+ <function>close</function> callback + + + + + + + + + Guess what. + + + + The open and close + callbacks of a rawmidi device are serialized with a mutex, + and can sleep. + +
+ +
+ <function>trigger</function> callback for output + substreams + + + + + + + + + This is called with a nonzero up + parameter when there is some data in the substream buffer that + must be transmitted. + + + + To read data from the buffer, call + snd_rawmidi_transmit_peek. It will + return the number of bytes that have been read; this will be + less than the number of bytes requested when there are no more + data in the buffer. + After the data have been transmitted successfully, call + snd_rawmidi_transmit_ack to remove the + data from the substream buffer: + + + + + + + + + If you know beforehand that the hardware will accept data, you + can use the snd_rawmidi_transmit function + which reads some data and removes them from the buffer at once: + + + + + + + + + If you know beforehand how many bytes you can accept, you can + use a buffer size greater than one with the + snd_rawmidi_transmit* functions. + + + + The trigger callback must not sleep. If + the hardware FIFO is full before the substream buffer has been + emptied, you have to continue transmitting data later, either + in an interrupt handler, or with a timer if the hardware + doesn't have a MIDI transmit interrupt. + + + + The trigger callback is called with a + zero up parameter when the transmission + of data should be aborted. + +
+ +
+ <function>trigger</function> callback for input + substreams + + + + + + + + + This is called with a nonzero up + parameter to enable receiving data, or with a zero + up parameter do disable receiving data. + + + + The trigger callback must not sleep; the + actual reading of data from the device is usually done in an + interrupt handler. + + + + When data reception is enabled, your interrupt handler should + call snd_rawmidi_receive for all received + data: + + + + + + +
+ +
+ <function>drain</function> callback + + + + + + + + + This is only used with output substreams. This function should wait + until all data read from the substream buffer have been transmitted. + This ensures that the device can be closed and the driver unloaded + without losing data. + + + + This callback is optional. If you do not set + drain in the struct snd_rawmidi_ops + structure, ALSA will simply wait for 50 milliseconds + instead. + +
+
+ + + + + + + + + Miscellaneous Devices + +
+ FM OPL3 + + The FM OPL3 is still used in many chips (mainly for backward + compatibility). ALSA has a nice OPL3 FM control layer, too. The + OPL3 API is defined in + <sound/opl3.h>. + + + + FM registers can be directly accessed through the direct-FM API, + defined in <sound/asound_fm.h>. In + ALSA native mode, FM registers are accessed through + the Hardware-Dependant Device direct-FM extension API, whereas in + OSS compatible mode, FM registers can be accessed with the OSS + direct-FM compatible API in /dev/dmfmX device. + + + + To create the OPL3 component, you have two functions to + call. The first one is a constructor for the opl3_t + instance. + + + + + + + + + + The first argument is the card pointer, the second one is the + left port address, and the third is the right port address. In + most cases, the right port is placed at the left port + 2. + + + + The fourth argument is the hardware type. + + + + When the left and right ports have been already allocated by + the card driver, pass non-zero to the fifth argument + (integrated). Otherwise, the opl3 module will + allocate the specified ports by itself. + + + + When the accessing the hardware requires special method + instead of the standard I/O access, you can create opl3 instance + separately with snd_opl3_new(). + + + + + + + + + + Then set command, + private_data and + private_free for the private + access function, the private data and the destructor. + The l_port and r_port are not necessarily set. Only the + command must be set properly. You can retrieve the data + from the opl3->private_data field. + + + + After creating the opl3 instance via snd_opl3_new(), + call snd_opl3_init() to initialize the chip to the + proper state. Note that snd_opl3_create() always + calls it internally. + + + + If the opl3 instance is created successfully, then create a + hwdep device for this opl3. + + + + + + + + + + The first argument is the opl3_t instance you + created, and the second is the index number, usually 0. + + + + The third argument is the index-offset for the sequencer + client assigned to the OPL3 port. When there is an MPU401-UART, + give 1 for here (UART always takes 0). + +
+ +
+ Hardware-Dependent Devices + + Some chips need user-space access for special + controls or for loading the micro code. In such a case, you can + create a hwdep (hardware-dependent) device. The hwdep API is + defined in <sound/hwdep.h>. You can + find examples in opl3 driver or + isa/sb/sb16_csp.c. + + + + The creation of the hwdep instance is done via + snd_hwdep_new(). + + + + + + + + where the third argument is the index number. + + + + You can then pass any pointer value to the + private_data. + If you assign a private data, you should define the + destructor, too. The destructor function is set in + the private_free field. + + + +private_data = p; + hw->private_free = mydata_free; +]]> + + + + and the implementation of the destructor would be: + + + +private_data; + kfree(p); + } +]]> + + + + + + The arbitrary file operations can be defined for this + instance. The file operators are defined in + the ops table. For example, assume that + this chip needs an ioctl. + + + +ops.open = mydata_open; + hw->ops.ioctl = mydata_ioctl; + hw->ops.release = mydata_release; +]]> + + + + And implement the callback functions as you like. + +
+ +
+ IEC958 (S/PDIF) + + Usually the controls for IEC958 devices are implemented via + the control interface. There is a macro to compose a name string for + IEC958 controls, SNDRV_CTL_NAME_IEC958() + defined in <include/asound.h>. + + + + There are some standard controls for IEC958 status bits. These + controls use the type SNDRV_CTL_ELEM_TYPE_IEC958, + and the size of element is fixed as 4 bytes array + (value.iec958.status[x]). For the info + callback, you don't specify + the value field for this type (the count field must be set, + though). + + + + IEC958 Playback Con Mask is used to return the + bit-mask for the IEC958 status bits of consumer mode. Similarly, + IEC958 Playback Pro Mask returns the bitmask for + professional mode. They are read-only controls, and are defined + as MIXER controls (iface = + SNDRV_CTL_ELEM_IFACE_MIXER). + + + + Meanwhile, IEC958 Playback Default control is + defined for getting and setting the current default IEC958 + bits. Note that this one is usually defined as a PCM control + (iface = SNDRV_CTL_ELEM_IFACE_PCM), + although in some places it's defined as a MIXER control. + + + + In addition, you can define the control switches to + enable/disable or to set the raw bit mode. The implementation + will depend on the chip, but the control should be named as + IEC958 xxx, preferably using + the SNDRV_CTL_NAME_IEC958() macro. + + + + You can find several cases, for example, + pci/emu10k1, + pci/ice1712, or + pci/cmipci.c. + +
+ + + + + + + + + Buffer and Memory Management + +
+ Buffer Types + + ALSA provides several different buffer allocation functions + depending on the bus and the architecture. All these have a + consistent API. The allocation of physically-contiguous pages is + done via + snd_malloc_xxx_pages() function, where xxx + is the bus type. + + + + The allocation of pages with fallback is + snd_malloc_xxx_pages_fallback(). This + function tries to allocate the specified pages but if the pages + are not available, it tries to reduce the page sizes until + enough space is found. + + + + The release the pages, call + snd_free_xxx_pages() function. + + + + Usually, ALSA drivers try to allocate and reserve + a large contiguous physical space + at the time the module is loaded for the later use. + This is called pre-allocation. + As already written, you can call the following function at + pcm instance construction time (in the case of PCI bus). + + + + + + + + where size is the byte size to be + pre-allocated and the max is the maximum + size to be changed via the prealloc proc file. + The allocator will try to get an area as large as possible + within the given size. + + + + The second argument (type) and the third argument (device pointer) + are dependent on the bus. + In the case of the ISA bus, pass snd_dma_isa_data() + as the third argument with SNDRV_DMA_TYPE_DEV type. + For the continuous buffer unrelated to the bus can be pre-allocated + with SNDRV_DMA_TYPE_CONTINUOUS type and the + snd_dma_continuous_data(GFP_KERNEL) device pointer, + where GFP_KERNEL is the kernel allocation flag to + use. + For the PCI scatter-gather buffers, use + SNDRV_DMA_TYPE_DEV_SG with + snd_dma_pci_data(pci) + (see the + Non-Contiguous Buffers + section). + + + + Once the buffer is pre-allocated, you can use the + allocator in the hw_params callback: + + + + + + + + Note that you have to pre-allocate to use this function. + +
+ +
+ External Hardware Buffers + + Some chips have their own hardware buffers and the DMA + transfer from the host memory is not available. In such a case, + you need to either 1) copy/set the audio data directly to the + external hardware buffer, or 2) make an intermediate buffer and + copy/set the data from it to the external hardware buffer in + interrupts (or in tasklets, preferably). + + + + The first case works fine if the external hardware buffer is large + enough. This method doesn't need any extra buffers and thus is + more effective. You need to define the + copy and + silence callbacks for + the data transfer. However, there is a drawback: it cannot + be mmapped. The examples are GUS's GF1 PCM or emu8000's + wavetable PCM. + + + + The second case allows for mmap on the buffer, although you have + to handle an interrupt or a tasklet to transfer the data + from the intermediate buffer to the hardware buffer. You can find an + example in the vxpocket driver. + + + + Another case is when the chip uses a PCI memory-map + region for the buffer instead of the host memory. In this case, + mmap is available only on certain architectures like the Intel one. + In non-mmap mode, the data cannot be transferred as in the normal + way. Thus you need to define the copy and + silence callbacks as well, + as in the cases above. The examples are found in + rme32.c and rme96.c. + + + + The implementation of the copy and + silence callbacks depends upon + whether the hardware supports interleaved or non-interleaved + samples. The copy callback is + defined like below, a bit + differently depending whether the direction is playback or + capture: + + + + + + + + + + In the case of interleaved samples, the second argument + (channel) is not used. The third argument + (pos) points the + current position offset in frames. + + + + The meaning of the fourth argument is different between + playback and capture. For playback, it holds the source data + pointer, and for capture, it's the destination data pointer. + + + + The last argument is the number of frames to be copied. + + + + What you have to do in this callback is again different + between playback and capture directions. In the + playback case, you copy the given amount of data + (count) at the specified pointer + (src) to the specified offset + (pos) on the hardware buffer. When + coded like memcpy-like way, the copy would be like: + + + + + + + + + + For the capture direction, you copy the given amount of + data (count) at the specified offset + (pos) on the hardware buffer to the + specified pointer (dst). + + + + + + + + Note that both the position and the amount of data are given + in frames. + + + + In the case of non-interleaved samples, the implementation + will be a bit more complicated. + + + + You need to check the channel argument, and if it's -1, copy + the whole channels. Otherwise, you have to copy only the + specified channel. Please check + isa/gus/gus_pcm.c as an example. + + + + The silence callback is also + implemented in a similar way. + + + + + + + + + + The meanings of arguments are the same as in the + copy + callback, although there is no src/dst + argument. In the case of interleaved samples, the channel + argument has no meaning, as well as on + copy callback. + + + + The role of silence callback is to + set the given amount + (count) of silence data at the + specified offset (pos) on the hardware + buffer. Suppose that the data format is signed (that is, the + silent-data is 0), and the implementation using a memset-like + function would be like: + + + + + + + + + + In the case of non-interleaved samples, again, the + implementation becomes a bit more complicated. See, for example, + isa/gus/gus_pcm.c. + +
+ +
+ Non-Contiguous Buffers + + If your hardware supports the page table as in emu10k1 or the + buffer descriptors as in via82xx, you can use the scatter-gather + (SG) DMA. ALSA provides an interface for handling SG-buffers. + The API is provided in <sound/pcm.h>. + + + + For creating the SG-buffer handler, call + snd_pcm_lib_preallocate_pages() or + snd_pcm_lib_preallocate_pages_for_all() + with SNDRV_DMA_TYPE_DEV_SG + in the PCM constructor like other PCI pre-allocator. + You need to pass snd_dma_pci_data(pci), + where pci is the struct pci_dev pointer + of the chip as well. + The struct snd_sg_buf instance is created as + substream->dma_private. You can cast + the pointer like: + + + +dma_private; +]]> + + + + + + Then call snd_pcm_lib_malloc_pages() + in the hw_params callback + as well as in the case of normal PCI buffer. + The SG-buffer handler will allocate the non-contiguous kernel + pages of the given size and map them onto the virtually contiguous + memory. The virtual pointer is addressed in runtime->dma_area. + The physical address (runtime->dma_addr) is set to zero, + because the buffer is physically non-contigous. + The physical address table is set up in sgbuf->table. + You can get the physical address at a certain offset via + snd_pcm_sgbuf_get_addr(). + + + + When a SG-handler is used, you need to set + snd_pcm_sgbuf_ops_page as + the page callback. + (See + page callback section.) + + + + To release the data, call + snd_pcm_lib_free_pages() in the + hw_free callback as usual. + +
+ +
+ Vmalloc'ed Buffers + + It's possible to use a buffer allocated via + vmalloc, for example, for an intermediate + buffer. Since the allocated pages are not contiguous, you need + to set the page callback to obtain + the physical address at every offset. + + + + The implementation of page callback + would be like this: + + + + + + /* get the physical page pointer on the given offset */ + static struct page *mychip_page(struct snd_pcm_substream *substream, + unsigned long offset) + { + void *pageptr = substream->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); + } +]]> + + + +
+ + + + + + + + + Proc Interface + + ALSA provides an easy interface for procfs. The proc files are + very useful for debugging. I recommend you set up proc files if + you write a driver and want to get a running status or register + dumps. The API is found in + <sound/info.h>. + + + + To create a proc file, call + snd_card_proc_new(). + + + + + + + + where the second argument specifies the name of the proc file to be + created. The above example will create a file + my-file under the card directory, + e.g. /proc/asound/card0/my-file. + + + + Like other components, the proc entry created via + snd_card_proc_new() will be registered and + released automatically in the card registration and release + functions. + + + + When the creation is successful, the function stores a new + instance in the pointer given in the third argument. + It is initialized as a text proc file for read only. To use + this proc file as a read-only text file as it is, set the read + callback with a private data via + snd_info_set_text_ops(). + + + + + + + + where the second argument (chip) is the + private data to be used in the callbacks. The third parameter + specifies the read buffer size and the fourth + (my_proc_read) is the callback function, which + is defined like + + + + + + + + + + + In the read callback, use snd_iprintf() for + output strings, which works just like normal + printf(). For example, + + + +private_data; + + snd_iprintf(buffer, "This is my chip!\n"); + snd_iprintf(buffer, "Port = %ld\n", chip->port); + } +]]> + + + + + + The file permissions can be changed afterwards. As default, it's + set as read only for all users. If you want to add write + permission for the user (root as default), do as follows: + + + +mode = S_IFREG | S_IRUGO | S_IWUSR; +]]> + + + + and set the write buffer size and the callback + + + +c.text.write = my_proc_write; +]]> + + + + + + For the write callback, you can use + snd_info_get_line() to get a text line, and + snd_info_get_str() to retrieve a string from + the line. Some examples are found in + core/oss/mixer_oss.c, core/oss/and + pcm_oss.c. + + + + For a raw-data proc-file, set the attributes as follows: + + + +content = SNDRV_INFO_CONTENT_DATA; + entry->private_data = chip; + entry->c.ops = &my_file_io_ops; + entry->size = 4096; + entry->mode = S_IFREG | S_IRUGO; +]]> + + + + + + The callback is much more complicated than the text-file + version. You need to use a low-level I/O functions such as + copy_from/to_user() to transfer the + data. + + + + local_max_size) + size = local_max_size - pos; + if (copy_to_user(buf, local_data + pos, size)) + return -EFAULT; + return size; + } +]]> + + + + + + + + + + + + Power Management + + If the chip is supposed to work with suspend/resume + functions, you need to add power-management code to the + driver. The additional code for power-management should be + ifdef'ed with + CONFIG_PM. + + + + If the driver fully supports suspend/resume + that is, the device can be + properly resumed to its state when suspend was called, + you can set the SNDRV_PCM_INFO_RESUME flag + in the pcm info field. Usually, this is possible when the + registers of the chip can be safely saved and restored to + RAM. If this is set, the trigger callback is called with + SNDRV_PCM_TRIGGER_RESUME after the resume + callback completes. + + + + Even if the driver doesn't support PM fully but + partial suspend/resume is still possible, it's still worthy to + implement suspend/resume callbacks. In such a case, applications + would reset the status by calling + snd_pcm_prepare() and restart the stream + appropriately. Hence, you can define suspend/resume callbacks + below but don't set SNDRV_PCM_INFO_RESUME + info flag to the PCM. + + + + Note that the trigger with SUSPEND can always be called when + snd_pcm_suspend_all is called, + regardless of the SNDRV_PCM_INFO_RESUME flag. + The RESUME flag affects only the behavior + of snd_pcm_resume(). + (Thus, in theory, + SNDRV_PCM_TRIGGER_RESUME isn't needed + to be handled in the trigger callback when no + SNDRV_PCM_INFO_RESUME flag is set. But, + it's better to keep it for compatibility reasons.) + + + In the earlier version of ALSA drivers, a common + power-management layer was provided, but it has been removed. + The driver needs to define the suspend/resume hooks according to + the bus the device is connected to. In the case of PCI drivers, the + callbacks look like below: + + + + + + + + + + The scheme of the real suspend job is as follows. + + + Retrieve the card and the chip data. + Call snd_power_change_state() with + SNDRV_CTL_POWER_D3hot to change the + power status. + Call snd_pcm_suspend_all() to suspend the running PCM streams. + If AC97 codecs are used, call + snd_ac97_suspend() for each codec. + Save the register values if necessary. + Stop the hardware if necessary. + Disable the PCI device by calling + pci_disable_device(). Then, call + pci_save_state() at last. + + + + + A typical code would be like: + + + +private_data; + /* (2) */ + snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); + /* (3) */ + snd_pcm_suspend_all(chip->pcm); + /* (4) */ + snd_ac97_suspend(chip->ac97); + /* (5) */ + snd_mychip_save_registers(chip); + /* (6) */ + snd_mychip_stop_hardware(chip); + /* (7) */ + pci_disable_device(pci); + pci_save_state(pci); + return 0; + } +]]> + + + + + + The scheme of the real resume job is as follows. + + + Retrieve the card and the chip data. + Set up PCI. First, call pci_restore_state(). + Then enable the pci device again by calling pci_enable_device(). + Call pci_set_master() if necessary, too. + Re-initialize the chip. + Restore the saved registers if necessary. + Resume the mixer, e.g. calling + snd_ac97_resume(). + Restart the hardware (if any). + Call snd_power_change_state() with + SNDRV_CTL_POWER_D0 to notify the processes. + + + + + A typical code would be like: + + + +private_data; + /* (2) */ + pci_restore_state(pci); + pci_enable_device(pci); + pci_set_master(pci); + /* (3) */ + snd_mychip_reinit_chip(chip); + /* (4) */ + snd_mychip_restore_registers(chip); + /* (5) */ + snd_ac97_resume(chip->ac97); + /* (6) */ + snd_mychip_restart_chip(chip); + /* (7) */ + snd_power_change_state(card, SNDRV_CTL_POWER_D0); + return 0; + } +]]> + + + + + + As shown in the above, it's better to save registers after + suspending the PCM operations via + snd_pcm_suspend_all() or + snd_pcm_suspend(). It means that the PCM + streams are already stoppped when the register snapshot is + taken. But, remember that you don't have to restart the PCM + stream in the resume callback. It'll be restarted via + trigger call with SNDRV_PCM_TRIGGER_RESUME + when necessary. + + + + OK, we have all callbacks now. Let's set them up. In the + initialization of the card, make sure that you can get the chip + data from the card instance, typically via + private_data field, in case you + created the chip data individually. + + + +private_data = chip; + .... + } +]]> + + + + When you created the chip data with + snd_card_create(), it's anyway accessible + via private_data field. + + + +private_data; + .... + } +]]> + + + + + + + If you need a space to save the registers, allocate the + buffer for it here, too, since it would be fatal + if you cannot allocate a memory in the suspend phase. + The allocated buffer should be released in the corresponding + destructor. + + + + And next, set suspend/resume callbacks to the pci_driver. + + + + + + + + + + + + + + + + Module Parameters + + There are standard module options for ALSA. At least, each + module should have the index, + id and enable + options. + + + + If the module supports multiple cards (usually up to + 8 = SNDRV_CARDS cards), they should be + arrays. The default initial values are defined already as + constants for easier programming: + + + + + + + + + + If the module supports only a single card, they could be single + variables, instead. enable option is not + always necessary in this case, but it would be better to have a + dummy option for compatibility. + + + + The module parameters must be declared with the standard + module_param()(), + module_param_array()() and + MODULE_PARM_DESC() macros. + + + + The typical coding would be like below: + + + + + + + + + + Also, don't forget to define the module description, classes, + license and devices. Especially, the recent modprobe requires to + define the module license as GPL, etc., otherwise the system is + shown as tainted. + + + + + + + + + + + + + + + + How To Put Your Driver Into ALSA Tree +
+ General + + So far, you've learned how to write the driver codes. + And you might have a question now: how to put my own + driver into the ALSA driver tree? + Here (finally :) the standard procedure is described briefly. + + + + Suppose that you create a new PCI driver for the card + xyz. The card module name would be + snd-xyz. The new driver is usually put into the alsa-driver + tree, alsa-driver/pci directory in + the case of PCI cards. + Then the driver is evaluated, audited and tested + by developers and users. After a certain time, the driver + will go to the alsa-kernel tree (to the corresponding directory, + such as alsa-kernel/pci) and eventually + will be integrated into the Linux 2.6 tree (the directory would be + linux/sound/pci). + + + + In the following sections, the driver code is supposed + to be put into alsa-driver tree. The two cases are covered: + a driver consisting of a single source file and one consisting + of several source files. + +
+ +
+ Driver with A Single Source File + + + + + Modify alsa-driver/pci/Makefile + + + + Suppose you have a file xyz.c. Add the following + two lines + + + + + + + + + + + Create the Kconfig entry + + + + Add the new entry of Kconfig for your xyz driver. + + + + + + + the line, select SND_PCM, specifies that the driver xyz supports + PCM. In addition to SND_PCM, the following components are + supported for select command: + SND_RAWMIDI, SND_TIMER, SND_HWDEP, SND_MPU401_UART, + SND_OPL3_LIB, SND_OPL4_LIB, SND_VX_LIB, SND_AC97_CODEC. + Add the select command for each supported component. + + + + Note that some selections imply the lowlevel selections. + For example, PCM includes TIMER, MPU401_UART includes RAWMIDI, + AC97_CODEC includes PCM, and OPL3_LIB includes HWDEP. + You don't need to give the lowlevel selections again. + + + + For the details of Kconfig script, refer to the kbuild + documentation. + + + + + + + Run cvscompile script to re-generate the configure script and + build the whole stuff again. + + + + +
+ +
+ Drivers with Several Source Files + + Suppose that the driver snd-xyz have several source files. + They are located in the new subdirectory, + pci/xyz. + + + + + Add a new directory (xyz) in + alsa-driver/pci/Makefile as below + + + + + + + + + + + + Under the directory xyz, create a Makefile + + + Sample Makefile for a driver xyz + + + + + + + + + + Create the Kconfig entry + + + + This procedure is as same as in the last section. + + + + + + Run cvscompile script to re-generate the configure script and + build the whole stuff again. + + + + +
+ + + + + + + + Useful Functions + +
+ <function>snd_printk()</function> and friends + + ALSA provides a verbose version of the + printk() function. If a kernel config + CONFIG_SND_VERBOSE_PRINTK is set, this + function prints the given message together with the file name + and the line of the caller. The KERN_XXX + prefix is processed as + well as the original printk() does, so it's + recommended to add this prefix, e.g. + + + + + + + + + + There are also printk()'s for + debugging. snd_printd() can be used for + general debugging purposes. If + CONFIG_SND_DEBUG is set, this function is + compiled, and works just like + snd_printk(). If the ALSA is compiled + without the debugging flag, it's ignored. + + + + snd_printdd() is compiled in only when + CONFIG_SND_DEBUG_VERBOSE is set. Please note + that CONFIG_SND_DEBUG_VERBOSE is not set as default + even if you configure the alsa-driver with + option. You need to give + explicitly option instead. + +
+ +
+ <function>snd_BUG()</function> + + It shows the BUG? message and + stack trace as well as snd_BUG_ON at the point. + It's useful to show that a fatal error happens there. + + + When no debug flag is set, this macro is ignored. + +
+ +
+ <function>snd_BUG_ON()</function> + + snd_BUG_ON() macro is similar with + WARN_ON() macro. For example, + + + + + + + + or it can be used as the condition, + + + + + + + + + + The macro takes an conditional expression to evaluate. + When CONFIG_SND_DEBUG, is set, the + expression is actually evaluated. If it's non-zero, it shows + the warning message such as + BUG? (xxx) + normally followed by stack trace. It returns the evaluated + value. + When no CONFIG_SND_DEBUG is set, this + macro always returns zero. + + +
+ + + + + + + + + Acknowledgments + + I would like to thank Phil Kerr for his help for improvement and + corrections of this document. + + + Kevin Conder reformatted the original plain-text to the + DocBook format. + + + Giuliano Pochini corrected typos and contributed the example codes + in the hardware constraints section. + + + diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl deleted file mode 100644 index 0230a96f0564..000000000000 --- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl +++ /dev/null @@ -1,109 +0,0 @@ - - - - - - - - - The ALSA Driver API - - - - This document is free; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - - - This document is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the - implied warranty of MERCHANTABILITY or FITNESS FOR A - PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - - - - - Management of Cards and Devices - Card Management -!Esound/core/init.c - - Device Components -!Esound/core/device.c - - Module requests and Device File Entries -!Esound/core/sound.c - - Memory Management Helpers -!Esound/core/memory.c -!Esound/core/memalloc.c - - - PCM API - PCM Core -!Esound/core/pcm.c -!Esound/core/pcm_lib.c -!Esound/core/pcm_native.c - - PCM Format Helpers -!Esound/core/pcm_misc.c - - PCM Memory Management -!Esound/core/pcm_memory.c - - - Control/Mixer API - General Control Interface -!Esound/core/control.c - - AC97 Codec API -!Esound/pci/ac97/ac97_codec.c -!Esound/pci/ac97/ac97_pcm.c - - Virtual Master Control API -!Esound/core/vmaster.c -!Iinclude/sound/control.h - - - MIDI API - Raw MIDI API -!Esound/core/rawmidi.c - - MPU401-UART API -!Esound/drivers/mpu401/mpu401_uart.c - - - Proc Info API - Proc Info Interface -!Esound/core/info.c - - - Miscellaneous Functions - Hardware-Dependent Devices API -!Esound/core/hwdep.c - - Jack Abstraction Layer API -!Esound/core/jack.c - - ISA DMA Helpers -!Esound/core/isadma.c - - Other Helper Macros -!Iinclude/sound/core.h - - - - diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl deleted file mode 100644 index 46b08fef3744..000000000000 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ /dev/null @@ -1,6216 +0,0 @@ - - - - - - - - - Writing an ALSA Driver - - Takashi - Iwai - -
- tiwai@suse.de -
- - - - Oct 15, 2007 - 0.3.7 - - - - This document describes how to write an ALSA (Advanced Linux - Sound Architecture) driver. - - - - - - Copyright (c) 2002-2005 Takashi Iwai tiwai@suse.de - - - - This document is free; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - - - This document is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the - implied warranty of MERCHANTABILITY or FITNESS FOR A - PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - - - - - - - Preface - - This document describes how to write an - - ALSA (Advanced Linux Sound Architecture) - driver. The document focuses mainly on PCI soundcards. - In the case of other device types, the API might - be different, too. However, at least the ALSA kernel API is - consistent, and therefore it would be still a bit help for - writing them. - - - - This document targets people who already have enough - C language skills and have basic linux kernel programming - knowledge. This document doesn't explain the general - topic of linux kernel coding and doesn't cover low-level - driver implementation details. It only describes - the standard way to write a PCI sound driver on ALSA. - - - - If you are already familiar with the older ALSA ver.0.5.x API, you - can check the drivers such as sound/pci/es1938.c or - sound/pci/maestro3.c which have also almost the same - code-base in the ALSA 0.5.x tree, so you can compare the differences. - - - - This document is still a draft version. Any feedback and - corrections, please!! - - - - - - - - - File Tree Structure - -
- General - - The ALSA drivers are provided in two ways. - - - - One is the trees provided as a tarball or via cvs from the - ALSA's ftp site, and another is the 2.6 (or later) Linux kernel - tree. To synchronize both, the ALSA driver tree is split into - two different trees: alsa-kernel and alsa-driver. The former - contains purely the source code for the Linux 2.6 (or later) - tree. This tree is designed only for compilation on 2.6 or - later environment. The latter, alsa-driver, contains many subtle - files for compiling ALSA drivers outside of the Linux kernel tree, - wrapper functions for older 2.2 and 2.4 kernels, to adapt the latest kernel API, - and additional drivers which are still in development or in - tests. The drivers in alsa-driver tree will be moved to - alsa-kernel (and eventually to the 2.6 kernel tree) when they are - finished and confirmed to work fine. - - - - The file tree structure of ALSA driver is depicted below. Both - alsa-kernel and alsa-driver have almost the same file - structure, except for core directory. It's - named as acore in alsa-driver tree. - - - ALSA File Tree Structure - - sound - /core - /oss - /seq - /oss - /instr - /ioctl32 - /include - /drivers - /mpu401 - /opl3 - /i2c - /l3 - /synth - /emux - /pci - /(cards) - /isa - /(cards) - /arm - /ppc - /sparc - /usb - /pcmcia /(cards) - /oss - - - -
- -
- core directory - - This directory contains the middle layer which is the heart - of ALSA drivers. In this directory, the native ALSA modules are - stored. The sub-directories contain different modules and are - dependent upon the kernel config. - - -
- core/oss - - - The codes for PCM and mixer OSS emulation modules are stored - in this directory. The rawmidi OSS emulation is included in - the ALSA rawmidi code since it's quite small. The sequencer - code is stored in core/seq/oss directory (see - - below). - -
- -
- core/ioctl32 - - - This directory contains the 32bit-ioctl wrappers for 64bit - architectures such like x86-64, ppc64 and sparc64. For 32bit - and alpha architectures, these are not compiled. - -
- -
- core/seq - - This directory and its sub-directories are for the ALSA - sequencer. This directory contains the sequencer core and - primary sequencer modules such like snd-seq-midi, - snd-seq-virmidi, etc. They are compiled only when - CONFIG_SND_SEQUENCER is set in the kernel - config. - -
- -
- core/seq/oss - - This contains the OSS sequencer emulation codes. - -
- -
- core/seq/instr - - This directory contains the modules for the sequencer - instrument layer. - -
-
- -
- include directory - - This is the place for the public header files of ALSA drivers, - which are to be exported to user-space, or included by - several files at different directories. Basically, the private - header files should not be placed in this directory, but you may - still find files there, due to historical reasons :) - -
- -
- drivers directory - - This directory contains code shared among different drivers - on different architectures. They are hence supposed not to be - architecture-specific. - For example, the dummy pcm driver and the serial MIDI - driver are found in this directory. In the sub-directories, - there is code for components which are independent from - bus and cpu architectures. - - -
- drivers/mpu401 - - The MPU401 and MPU401-UART modules are stored here. - -
- -
- drivers/opl3 and opl4 - - The OPL3 and OPL4 FM-synth stuff is found here. - -
-
- -
- i2c directory - - This contains the ALSA i2c components. - - - - Although there is a standard i2c layer on Linux, ALSA has its - own i2c code for some cards, because the soundcard needs only a - simple operation and the standard i2c API is too complicated for - such a purpose. - - -
- i2c/l3 - - This is a sub-directory for ARM L3 i2c. - -
-
- -
- synth directory - - This contains the synth middle-level modules. - - - - So far, there is only Emu8000/Emu10k1 synth driver under - the synth/emux sub-directory. - -
- -
- pci directory - - This directory and its sub-directories hold the top-level card modules - for PCI soundcards and the code specific to the PCI BUS. - - - - The drivers compiled from a single file are stored directly - in the pci directory, while the drivers with several source files are - stored on their own sub-directory (e.g. emu10k1, ice1712). - -
- -
- isa directory - - This directory and its sub-directories hold the top-level card modules - for ISA soundcards. - -
- -
- arm, ppc, and sparc directories - - They are used for top-level card modules which are - specific to one of these architectures. - -
- -
- usb directory - - This directory contains the USB-audio driver. In the latest version, the - USB MIDI driver is integrated in the usb-audio driver. - -
- -
- pcmcia directory - - The PCMCIA, especially PCCard drivers will go here. CardBus - drivers will be in the pci directory, because their API is identical - to that of standard PCI cards. - -
- -
- oss directory - - The OSS/Lite source files are stored here in Linux 2.6 (or - later) tree. In the ALSA driver tarball, this directory is empty, - of course :) - -
- - - - - - - - Basic Flow for PCI Drivers - -
- Outline - - The minimum flow for PCI soundcards is as follows: - - - define the PCI ID table (see the section - PCI Entries - ). - create probe() callback. - create remove() callback. - create a pci_driver structure - containing the three pointers above. - create an init() function just calling - the pci_register_driver() to register the pci_driver table - defined above. - create an exit() function to call - the pci_unregister_driver() function. - - -
- -
- Full Code Example - - The code example is shown below. Some parts are kept - unimplemented at this moment but will be filled in the - next sections. The numbers in the comment lines of the - snd_mychip_probe() function - refer to details explained in the following section. - - - Basic Flow for PCI Drivers - Example - - - #include - #include - #include - #include - - /* module parameters (see "Module Parameters") */ - /* SNDRV_CARDS: maximum number of cards supported by this module */ - static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; - static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; - static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; - - /* definition of the chip-specific record */ - struct mychip { - struct snd_card *card; - /* the rest of the implementation will be in section - * "PCI Resource Management" - */ - }; - - /* chip-specific destructor - * (see "PCI Resource Management") - */ - static int snd_mychip_free(struct mychip *chip) - { - .... /* will be implemented later... */ - } - - /* component-destructor - * (see "Management of Cards and Components") - */ - static int snd_mychip_dev_free(struct snd_device *device) - { - return snd_mychip_free(device->device_data); - } - - /* chip-specific constructor - * (see "Management of Cards and Components") - */ - static int __devinit snd_mychip_create(struct snd_card *card, - struct pci_dev *pci, - struct mychip **rchip) - { - struct mychip *chip; - int err; - static struct snd_device_ops ops = { - .dev_free = snd_mychip_dev_free, - }; - - *rchip = NULL; - - /* check PCI availability here - * (see "PCI Resource Management") - */ - .... - - /* allocate a chip-specific data with zero filled */ - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (chip == NULL) - return -ENOMEM; - - chip->card = card; - - /* rest of initialization here; will be implemented - * later, see "PCI Resource Management" - */ - .... - - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); - if (err < 0) { - snd_mychip_free(chip); - return err; - } - - snd_card_set_dev(card, &pci->dev); - - *rchip = chip; - return 0; - } - - /* constructor -- see "Constructor" sub-section */ - static int __devinit snd_mychip_probe(struct pci_dev *pci, - const struct pci_device_id *pci_id) - { - static int dev; - struct snd_card *card; - struct mychip *chip; - int err; - - /* (1) */ - if (dev >= SNDRV_CARDS) - return -ENODEV; - if (!enable[dev]) { - dev++; - return -ENOENT; - } - - /* (2) */ - err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); - if (err < 0) - return err; - - /* (3) */ - err = snd_mychip_create(card, pci, &chip); - if (err < 0) { - snd_card_free(card); - return err; - } - - /* (4) */ - strcpy(card->driver, "My Chip"); - strcpy(card->shortname, "My Own Chip 123"); - sprintf(card->longname, "%s at 0x%lx irq %i", - card->shortname, chip->ioport, chip->irq); - - /* (5) */ - .... /* implemented later */ - - /* (6) */ - err = snd_card_register(card); - if (err < 0) { - snd_card_free(card); - return err; - } - - /* (7) */ - pci_set_drvdata(pci, card); - dev++; - return 0; - } - - /* destructor -- see the "Destructor" sub-section */ - static void __devexit snd_mychip_remove(struct pci_dev *pci) - { - snd_card_free(pci_get_drvdata(pci)); - pci_set_drvdata(pci, NULL); - } -]]> - - - -
- -
- Constructor - - The real constructor of PCI drivers is the probe callback. - The probe callback and other component-constructors which are called - from the probe callback should be defined with - the __devinit prefix. You - cannot use the __init prefix for them, - because any PCI device could be a hotplug device. - - - - In the probe callback, the following scheme is often used. - - -
- 1) Check and increment the device index. - - - -= SNDRV_CARDS) - return -ENODEV; - if (!enable[dev]) { - dev++; - return -ENOENT; - } -]]> - - - - where enable[dev] is the module option. - - - - Each time the probe callback is called, check the - availability of the device. If not available, simply increment - the device index and returns. dev will be incremented also - later (step - 7). - -
- -
- 2) Create a card instance - - - - - - - - - - The details will be explained in the section - - Management of Cards and Components. - -
- -
- 3) Create a main component - - In this part, the PCI resources are allocated. - - - - - - - - The details will be explained in the section PCI Resource - Management. - -
- -
- 4) Set the driver ID and name strings. - - - -driver, "My Chip"); - strcpy(card->shortname, "My Own Chip 123"); - sprintf(card->longname, "%s at 0x%lx irq %i", - card->shortname, chip->ioport, chip->irq); -]]> - - - - The driver field holds the minimal ID string of the - chip. This is used by alsa-lib's configurator, so keep it - simple but unique. - Even the same driver can have different driver IDs to - distinguish the functionality of each chip type. - - - - The shortname field is a string shown as more verbose - name. The longname field contains the information - shown in /proc/asound/cards. - -
- -
- 5) Create other components, such as mixer, MIDI, etc. - - Here you define the basic components such as - PCM, - mixer (e.g. AC97), - MIDI (e.g. MPU-401), - and other interfaces. - Also, if you want a proc - file, define it here, too. - -
- -
- 6) Register the card instance. - - - - - - - - - - Will be explained in the section Management - of Cards and Components, too. - -
- -
- 7) Set the PCI driver data and return zero. - - - - - - - - In the above, the card record is stored. This pointer is - used in the remove callback and power-management - callbacks, too. - -
-
- -
- Destructor - - The destructor, remove callback, simply releases the card - instance. Then the ALSA middle layer will release all the - attached components automatically. - - - - It would be typically like the following: - - - - - - - - The above code assumes that the card pointer is set to the PCI - driver data. - -
- -
- Header Files - - For the above example, at least the following include files - are necessary. - - - - - #include - #include - #include - #include -]]> - - - - where the last one is necessary only when module options are - defined in the source file. If the code is split into several - files, the files without module options don't need them. - - - - In addition to these headers, you'll need - <linux/interrupt.h> for interrupt - handling, and <asm/io.h> for I/O - access. If you use the mdelay() or - udelay() functions, you'll need to include - <linux/delay.h> too. - - - - The ALSA interfaces like the PCM and control APIs are defined in other - <sound/xxx.h> header files. - They have to be included after - <sound/core.h>. - - -
- - - - - - - - Management of Cards and Components - -
- Card Instance - - For each soundcard, a card record must be allocated. - - - - A card record is the headquarters of the soundcard. It manages - the whole list of devices (components) on the soundcard, such as - PCM, mixers, MIDI, synthesizer, and so on. Also, the card - record holds the ID and the name strings of the card, manages - the root of proc files, and controls the power-management states - and hotplug disconnections. The component list on the card - record is used to manage the correct release of resources at - destruction. - - - - As mentioned above, to create a card instance, call - snd_card_create(). - - - - - - - - - - The function takes five arguments, the card-index number, the - id string, the module pointer (usually - THIS_MODULE), - the size of extra-data space, and the pointer to return the - card instance. The extra_size argument is used to - allocate card->private_data for the - chip-specific data. Note that these data - are allocated by snd_card_create(). - -
- -
- Components - - After the card is created, you can attach the components - (devices) to the card instance. In an ALSA driver, a component is - represented as a struct snd_device object. - A component can be a PCM instance, a control interface, a raw - MIDI interface, etc. Each such instance has one component - entry. - - - - A component can be created via - snd_device_new() function. - - - - - - - - - - This takes the card pointer, the device-level - (SNDRV_DEV_XXX), the data pointer, and the - callback pointers (&ops). The - device-level defines the type of components and the order of - registration and de-registration. For most components, the - device-level is already defined. For a user-defined component, - you can use SNDRV_DEV_LOWLEVEL. - - - - This function itself doesn't allocate the data space. The data - must be allocated manually beforehand, and its pointer is passed - as the argument. This pointer is used as the - (chip identifier in the above example) - for the instance. - - - - Each pre-defined ALSA component such as ac97 and pcm calls - snd_device_new() inside its - constructor. The destructor for each component is defined in the - callback pointers. Hence, you don't need to take care of - calling a destructor for such a component. - - - - If you wish to create your own component, you need to - set the destructor function to the dev_free callback in - the ops, so that it can be released - automatically via snd_card_free(). - The next example will show an implementation of chip-specific - data. - -
- -
- Chip-Specific Data - - Chip-specific information, e.g. the I/O port address, its - resource pointer, or the irq number, is stored in the - chip-specific record. - - - - - - - - - - In general, there are two ways of allocating the chip record. - - -
- 1. Allocating via <function>snd_card_create()</function>. - - As mentioned above, you can pass the extra-data-length - to the 4th argument of snd_card_create(), i.e. - - - - - - - - struct mychip is the type of the chip record. - - - - In return, the allocated record can be accessed as - - - -private_data; -]]> - - - - With this method, you don't have to allocate twice. - The record is released together with the card instance. - -
- -
- 2. Allocating an extra device. - - - After allocating a card instance via - snd_card_create() (with - 0 on the 4th arg), call - kzalloc(). - - - - - - - - - - The chip record should have the field to hold the card - pointer at least, - - - - - - - - - - Then, set the card pointer in the returned chip instance. - - - -card = card; -]]> - - - - - - Next, initialize the fields, and register this chip - record as a low-level device with a specified - ops, - - - - - - - - snd_mychip_dev_free() is the - device-destructor function, which will call the real - destructor. - - - - - -device_data); - } -]]> - - - - where snd_mychip_free() is the real destructor. - -
-
- -
- Registration and Release - - After all components are assigned, register the card instance - by calling snd_card_register(). Access - to the device files is enabled at this point. That is, before - snd_card_register() is called, the - components are safely inaccessible from external side. If this - call fails, exit the probe function after releasing the card via - snd_card_free(). - - - - For releasing the card instance, you can call simply - snd_card_free(). As mentioned earlier, all - components are released automatically by this call. - - - - As further notes, the destructors (both - snd_mychip_dev_free and - snd_mychip_free) cannot be defined with - the __devexit prefix, because they may be - called from the constructor, too, at the false path. - - - - For a device which allows hotplugging, you can use - snd_card_free_when_closed. This one will - postpone the destruction until all devices are closed. - - -
- - - - - - - - - PCI Resource Management - -
- Full Code Example - - In this section, we'll complete the chip-specific constructor, - destructor and PCI entries. Example code is shown first, - below. - - - PCI Resource Management Example - -irq >= 0) - free_irq(chip->irq, chip); - /* release the I/O ports & memory */ - pci_release_regions(chip->pci); - /* disable the PCI entry */ - pci_disable_device(chip->pci); - /* release the data */ - kfree(chip); - return 0; - } - - /* chip-specific constructor */ - static int __devinit snd_mychip_create(struct snd_card *card, - struct pci_dev *pci, - struct mychip **rchip) - { - struct mychip *chip; - int err; - static struct snd_device_ops ops = { - .dev_free = snd_mychip_dev_free, - }; - - *rchip = NULL; - - /* initialize the PCI entry */ - err = pci_enable_device(pci); - if (err < 0) - return err; - /* check PCI availability (28bit DMA) */ - if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || - pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { - printk(KERN_ERR "error to set 28bit mask DMA\n"); - pci_disable_device(pci); - return -ENXIO; - } - - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (chip == NULL) { - pci_disable_device(pci); - return -ENOMEM; - } - - /* initialize the stuff */ - chip->card = card; - chip->pci = pci; - chip->irq = -1; - - /* (1) PCI resource allocation */ - err = pci_request_regions(pci, "My Chip"); - if (err < 0) { - kfree(chip); - pci_disable_device(pci); - return err; - } - chip->port = pci_resource_start(pci, 0); - if (request_irq(pci->irq, snd_mychip_interrupt, - IRQF_SHARED, "My Chip", chip)) { - printk(KERN_ERR "cannot grab irq %d\n", pci->irq); - snd_mychip_free(chip); - return -EBUSY; - } - chip->irq = pci->irq; - - /* (2) initialization of the chip hardware */ - .... /* (not implemented in this document) */ - - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); - if (err < 0) { - snd_mychip_free(chip); - return err; - } - - snd_card_set_dev(card, &pci->dev); - - *rchip = chip; - return 0; - } - - /* PCI IDs */ - static struct pci_device_id snd_mychip_ids[] = { - { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, - .... - { 0, } - }; - MODULE_DEVICE_TABLE(pci, snd_mychip_ids); - - /* pci_driver definition */ - static struct pci_driver driver = { - .name = "My Own Chip", - .id_table = snd_mychip_ids, - .probe = snd_mychip_probe, - .remove = __devexit_p(snd_mychip_remove), - }; - - /* module initialization */ - static int __init alsa_card_mychip_init(void) - { - return pci_register_driver(&driver); - } - - /* module clean up */ - static void __exit alsa_card_mychip_exit(void) - { - pci_unregister_driver(&driver); - } - - module_init(alsa_card_mychip_init) - module_exit(alsa_card_mychip_exit) - - EXPORT_NO_SYMBOLS; /* for old kernels only */ -]]> - - - -
- -
- Some Hafta's - - The allocation of PCI resources is done in the - probe() function, and usually an extra - xxx_create() function is written for this - purpose. - - - - In the case of PCI devices, you first have to call - the pci_enable_device() function before - allocating resources. Also, you need to set the proper PCI DMA - mask to limit the accessed I/O range. In some cases, you might - need to call pci_set_master() function, - too. - - - - Suppose the 28bit mask, and the code to be added would be like: - - - - - - - -
- -
- Resource Allocation - - The allocation of I/O ports and irqs is done via standard kernel - functions. Unlike ALSA ver.0.5.x., there are no helpers for - that. And these resources must be released in the destructor - function (see below). Also, on ALSA 0.9.x, you don't need to - allocate (pseudo-)DMA for PCI like in ALSA 0.5.x. - - - - Now assume that the PCI device has an I/O port with 8 bytes - and an interrupt. Then struct mychip will have the - following fields: - - - - - - - - - - For an I/O port (and also a memory region), you need to have - the resource pointer for the standard resource management. For - an irq, you have to keep only the irq number (integer). But you - need to initialize this number as -1 before actual allocation, - since irq 0 is valid. The port address and its resource pointer - can be initialized as null by - kzalloc() automatically, so you - don't have to take care of resetting them. - - - - The allocation of an I/O port is done like this: - - - -port = pci_resource_start(pci, 0); -]]> - - - - - - - It will reserve the I/O port region of 8 bytes of the given - PCI device. The returned value, chip->res_port, is allocated - via kmalloc() by - request_region(). The pointer must be - released via kfree(), but there is a - problem with this. This issue will be explained later. - - - - The allocation of an interrupt source is done like this: - - - -irq, snd_mychip_interrupt, - IRQF_SHARED, "My Chip", chip)) { - printk(KERN_ERR "cannot grab irq %d\n", pci->irq); - snd_mychip_free(chip); - return -EBUSY; - } - chip->irq = pci->irq; -]]> - - - - where snd_mychip_interrupt() is the - interrupt handler defined later. - Note that chip->irq should be defined - only when request_irq() succeeded. - - - - On the PCI bus, interrupts can be shared. Thus, - IRQF_SHARED is used as the interrupt flag of - request_irq(). - - - - The last argument of request_irq() is the - data pointer passed to the interrupt handler. Usually, the - chip-specific record is used for that, but you can use what you - like, too. - - - - I won't give details about the interrupt handler at this - point, but at least its appearance can be explained now. The - interrupt handler looks usually like the following: - - - - - - - - - - Now let's write the corresponding destructor for the resources - above. The role of destructor is simple: disable the hardware - (if already activated) and release the resources. So far, we - have no hardware part, so the disabling code is not written here. - - - - To release the resources, the check-and-release - method is a safer way. For the interrupt, do like this: - - - -irq >= 0) - free_irq(chip->irq, chip); -]]> - - - - Since the irq number can start from 0, you should initialize - chip->irq with a negative value (e.g. -1), so that you can - check the validity of the irq number as above. - - - - When you requested I/O ports or memory regions via - pci_request_region() or - pci_request_regions() like in this example, - release the resource(s) using the corresponding function, - pci_release_region() or - pci_release_regions(). - - - -pci); -]]> - - - - - - When you requested manually via request_region() - or request_mem_region, you can release it via - release_resource(). Suppose that you keep - the resource pointer returned from request_region() - in chip->res_port, the release procedure looks like: - - - -res_port); -]]> - - - - - - Don't forget to call pci_disable_device() - before the end. - - - - And finally, release the chip-specific record. - - - - - - - - - - Again, remember that you cannot - use the __devexit prefix for this destructor. - - - - We didn't implement the hardware disabling part in the above. - If you need to do this, please note that the destructor may be - called even before the initialization of the chip is completed. - It would be better to have a flag to skip hardware disabling - if the hardware was not initialized yet. - - - - When the chip-data is assigned to the card using - snd_device_new() with - SNDRV_DEV_LOWLELVEL , its destructor is - called at the last. That is, it is assured that all other - components like PCMs and controls have already been released. - You don't have to stop PCMs, etc. explicitly, but just - call low-level hardware stopping. - - - - The management of a memory-mapped region is almost as same as - the management of an I/O port. You'll need three fields like - the following: - - - - - - - - and the allocation would be like below: - - - -iobase_phys = pci_resource_start(pci, 0); - chip->iobase_virt = ioremap_nocache(chip->iobase_phys, - pci_resource_len(pci, 0)); -]]> - - - - and the corresponding destructor would be: - - - -iobase_virt) - iounmap(chip->iobase_virt); - .... - pci_release_regions(chip->pci); - .... - } -]]> - - - - -
- -
- Registration of Device Struct - - At some point, typically after calling snd_device_new(), - you need to register the struct device of the chip - you're handling for udev and co. ALSA provides a macro for compatibility with - older kernels. Simply call like the following: - - -dev); -]]> - - - so that it stores the PCI's device pointer to the card. This will be - referred by ALSA core functions later when the devices are registered. - - - In the case of non-PCI, pass the proper device struct pointer of the BUS - instead. (In the case of legacy ISA without PnP, you don't have to do - anything.) - -
- -
- PCI Entries - - So far, so good. Let's finish the missing PCI - stuff. At first, we need a - pci_device_id table for this - chipset. It's a table of PCI vendor/device ID number, and some - masks. - - - - For example, - - - - - - - - - - The first and second fields of - the pci_device_id structure are the vendor and - device IDs. If you have no reason to filter the matching - devices, you can leave the remaining fields as above. The last - field of the pci_device_id struct contains - private data for this entry. You can specify any value here, for - example, to define specific operations for supported device IDs. - Such an example is found in the intel8x0 driver. - - - - The last entry of this list is the terminator. You must - specify this all-zero entry. - - - - Then, prepare the pci_driver record: - - - - - - - - - - The probe and - remove functions have already - been defined in the previous sections. - The remove function should - be defined with the - __devexit_p() macro, so that it's not - defined for built-in (and non-hot-pluggable) case. The - name - field is the name string of this device. Note that you must not - use a slash / in this string. - - - - And at last, the module entries: - - - - - - - - - - Note that these module entries are tagged with - __init and - __exit prefixes, not - __devinit nor - __devexit. - - - - Oh, one thing was forgotten. If you have no exported symbols, - you need to declare it in 2.2 or 2.4 kernels (it's not necessary in 2.6 kernels). - - - - - - - - That's all! - -
- - - - - - - - PCM Interface - -
- General - - The PCM middle layer of ALSA is quite powerful and it is only - necessary for each driver to implement the low-level functions - to access its hardware. - - - - For accessing to the PCM layer, you need to include - <sound/pcm.h> first. In addition, - <sound/pcm_params.h> might be needed - if you access to some functions related with hw_param. - - - - Each card device can have up to four pcm instances. A pcm - instance corresponds to a pcm device file. The limitation of - number of instances comes only from the available bit size of - the Linux's device numbers. Once when 64bit device number is - used, we'll have more pcm instances available. - - - - A pcm instance consists of pcm playback and capture streams, - and each pcm stream consists of one or more pcm substreams. Some - soundcards support multiple playback functions. For example, - emu10k1 has a PCM playback of 32 stereo substreams. In this case, at - each open, a free substream is (usually) automatically chosen - and opened. Meanwhile, when only one substream exists and it was - already opened, the successful open will either block - or error with EAGAIN according to the - file open mode. But you don't have to care about such details in your - driver. The PCM middle layer will take care of such work. - -
- -
- Full Code Example - - The example code below does not include any hardware access - routines but shows only the skeleton, how to build up the PCM - interfaces. - - - PCM Example Code - - - .... - - /* hardware definition */ - static struct snd_pcm_hardware snd_mychip_playback_hw = { - .info = (SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_8000_48000, - .rate_min = 8000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = 32768, - .period_bytes_min = 4096, - .period_bytes_max = 32768, - .periods_min = 1, - .periods_max = 1024, - }; - - /* hardware definition */ - static struct snd_pcm_hardware snd_mychip_capture_hw = { - .info = (SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_8000_48000, - .rate_min = 8000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = 32768, - .period_bytes_min = 4096, - .period_bytes_max = 32768, - .periods_min = 1, - .periods_max = 1024, - }; - - /* open callback */ - static int snd_mychip_playback_open(struct snd_pcm_substream *substream) - { - struct mychip *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - - runtime->hw = snd_mychip_playback_hw; - /* more hardware-initialization will be done here */ - .... - return 0; - } - - /* close callback */ - static int snd_mychip_playback_close(struct snd_pcm_substream *substream) - { - struct mychip *chip = snd_pcm_substream_chip(substream); - /* the hardware-specific codes will be here */ - .... - return 0; - - } - - /* open callback */ - static int snd_mychip_capture_open(struct snd_pcm_substream *substream) - { - struct mychip *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - - runtime->hw = snd_mychip_capture_hw; - /* more hardware-initialization will be done here */ - .... - return 0; - } - - /* close callback */ - static int snd_mychip_capture_close(struct snd_pcm_substream *substream) - { - struct mychip *chip = snd_pcm_substream_chip(substream); - /* the hardware-specific codes will be here */ - .... - return 0; - - } - - /* hw_params callback */ - static int snd_mychip_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) - { - return snd_pcm_lib_malloc_pages(substream, - params_buffer_bytes(hw_params)); - } - - /* hw_free callback */ - static int snd_mychip_pcm_hw_free(struct snd_pcm_substream *substream) - { - return snd_pcm_lib_free_pages(substream); - } - - /* prepare callback */ - static int snd_mychip_pcm_prepare(struct snd_pcm_substream *substream) - { - struct mychip *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - - /* set up the hardware with the current configuration - * for example... - */ - mychip_set_sample_format(chip, runtime->format); - mychip_set_sample_rate(chip, runtime->rate); - mychip_set_channels(chip, runtime->channels); - mychip_set_dma_setup(chip, runtime->dma_addr, - chip->buffer_size, - chip->period_size); - return 0; - } - - /* trigger callback */ - static int snd_mychip_pcm_trigger(struct snd_pcm_substream *substream, - int cmd) - { - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - /* do something to start the PCM engine */ - .... - break; - case SNDRV_PCM_TRIGGER_STOP: - /* do something to stop the PCM engine */ - .... - break; - default: - return -EINVAL; - } - } - - /* pointer callback */ - static snd_pcm_uframes_t - snd_mychip_pcm_pointer(struct snd_pcm_substream *substream) - { - struct mychip *chip = snd_pcm_substream_chip(substream); - unsigned int current_ptr; - - /* get the current hardware pointer */ - current_ptr = mychip_get_hw_pointer(chip); - return current_ptr; - } - - /* operators */ - static struct snd_pcm_ops snd_mychip_playback_ops = { - .open = snd_mychip_playback_open, - .close = snd_mychip_playback_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_mychip_pcm_hw_params, - .hw_free = snd_mychip_pcm_hw_free, - .prepare = snd_mychip_pcm_prepare, - .trigger = snd_mychip_pcm_trigger, - .pointer = snd_mychip_pcm_pointer, - }; - - /* operators */ - static struct snd_pcm_ops snd_mychip_capture_ops = { - .open = snd_mychip_capture_open, - .close = snd_mychip_capture_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_mychip_pcm_hw_params, - .hw_free = snd_mychip_pcm_hw_free, - .prepare = snd_mychip_pcm_prepare, - .trigger = snd_mychip_pcm_trigger, - .pointer = snd_mychip_pcm_pointer, - }; - - /* - * definitions of capture are omitted here... - */ - - /* create a pcm device */ - static int __devinit snd_mychip_new_pcm(struct mychip *chip) - { - struct snd_pcm *pcm; - int err; - - err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1, &pcm); - if (err < 0) - return err; - pcm->private_data = chip; - strcpy(pcm->name, "My Chip"); - chip->pcm = pcm; - /* set operators */ - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, - &snd_mychip_playback_ops); - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, - &snd_mychip_capture_ops); - /* pre-allocation of buffers */ - /* NOTE: this may fail */ - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, - snd_dma_pci_data(chip->pci), - 64*1024, 64*1024); - return 0; - } -]]> - - - -
- -
- Constructor - - A pcm instance is allocated by the snd_pcm_new() - function. It would be better to create a constructor for pcm, - namely, - - - -card, "My Chip", 0, 1, 1, &pcm); - if (err < 0) - return err; - pcm->private_data = chip; - strcpy(pcm->name, "My Chip"); - chip->pcm = pcm; - .... - return 0; - } -]]> - - - - - - The snd_pcm_new() function takes four - arguments. The first argument is the card pointer to which this - pcm is assigned, and the second is the ID string. - - - - The third argument (index, 0 in the - above) is the index of this new pcm. It begins from zero. If - you create more than one pcm instances, specify the - different numbers in this argument. For example, - index = 1 for the second PCM device. - - - - The fourth and fifth arguments are the number of substreams - for playback and capture, respectively. Here 1 is used for - both arguments. When no playback or capture substreams are available, - pass 0 to the corresponding argument. - - - - If a chip supports multiple playbacks or captures, you can - specify more numbers, but they must be handled properly in - open/close, etc. callbacks. When you need to know which - substream you are referring to, then it can be obtained from - struct snd_pcm_substream data passed to each callback - as follows: - - - -number; -]]> - - - - - - After the pcm is created, you need to set operators for each - pcm stream. - - - - - - - - - - The operators are defined typically like this: - - - - - - - - All the callbacks are described in the - - Operators subsection. - - - - After setting the operators, you probably will want to - pre-allocate the buffer. For the pre-allocation, simply call - the following: - - - -pci), - 64*1024, 64*1024); -]]> - - - - It will allocate a buffer up to 64kB as default. - Buffer management details will be described in the later section Buffer and Memory - Management. - - - - Additionally, you can set some extra information for this pcm - in pcm->info_flags. - The available values are defined as - SNDRV_PCM_INFO_XXX in - <sound/asound.h>, which is used for - the hardware definition (described later). When your soundchip - supports only half-duplex, specify like this: - - - -info_flags = SNDRV_PCM_INFO_HALF_DUPLEX; -]]> - - - -
- -
- ... And the Destructor? - - The destructor for a pcm instance is not always - necessary. Since the pcm device will be released by the middle - layer code automatically, you don't have to call the destructor - explicitly. - - - - The destructor would be necessary if you created - special records internally and needed to release them. In such a - case, set the destructor function to - pcm->private_free: - - - PCM Instance with a Destructor - -my_private_pcm_data); - /* do what you like else */ - .... - } - - static int __devinit snd_mychip_new_pcm(struct mychip *chip) - { - struct snd_pcm *pcm; - .... - /* allocate your own data */ - chip->my_private_pcm_data = kmalloc(...); - /* set the destructor */ - pcm->private_data = chip; - pcm->private_free = mychip_pcm_free; - .... - } -]]> - - - -
- -
- Runtime Pointer - The Chest of PCM Information - - When the PCM substream is opened, a PCM runtime instance is - allocated and assigned to the substream. This pointer is - accessible via substream->runtime. - This runtime pointer holds most information you need - to control the PCM: the copy of hw_params and sw_params configurations, the buffer - pointers, mmap records, spinlocks, etc. - - - - The definition of runtime instance is found in - <sound/pcm.h>. Here are - the contents of this file: - - - - - - - - - For the operators (callbacks) of each sound driver, most of - these records are supposed to be read-only. Only the PCM - middle-layer changes / updates them. The exceptions are - the hardware description (hw), interrupt callbacks - (transfer_ack_xxx), DMA buffer information, and the private - data. Besides, if you use the standard buffer allocation - method via snd_pcm_lib_malloc_pages(), - you don't need to set the DMA buffer information by yourself. - - - - In the sections below, important records are explained. - - -
- Hardware Description - - The hardware descriptor (struct snd_pcm_hardware) - contains the definitions of the fundamental hardware - configuration. Above all, you'll need to define this in - - the open callback. - Note that the runtime instance holds the copy of the - descriptor, not the pointer to the existing descriptor. That - is, in the open callback, you can modify the copied descriptor - (runtime->hw) as you need. For example, if the maximum - number of channels is 1 only on some chip models, you can - still use the same hardware descriptor and change the - channels_max later: - - -runtime; - ... - runtime->hw = snd_mychip_playback_hw; /* common definition */ - if (chip->model == VERY_OLD_ONE) - runtime->hw.channels_max = 1; -]]> - - - - - - Typically, you'll have a hardware descriptor as below: - - - - - - - - - - - The info field contains the type and - capabilities of this pcm. The bit flags are defined in - <sound/asound.h> as - SNDRV_PCM_INFO_XXX. Here, at least, you - have to specify whether the mmap is supported and which - interleaved format is supported. - When the is supported, add the - SNDRV_PCM_INFO_MMAP flag here. When the - hardware supports the interleaved or the non-interleaved - formats, SNDRV_PCM_INFO_INTERLEAVED or - SNDRV_PCM_INFO_NONINTERLEAVED flag must - be set, respectively. If both are supported, you can set both, - too. - - - - In the above example, MMAP_VALID and - BLOCK_TRANSFER are specified for the OSS mmap - mode. Usually both are set. Of course, - MMAP_VALID is set only if the mmap is - really supported. - - - - The other possible flags are - SNDRV_PCM_INFO_PAUSE and - SNDRV_PCM_INFO_RESUME. The - PAUSE bit means that the pcm supports the - pause operation, while the - RESUME bit means that the pcm supports - the full suspend/resume operation. - If the PAUSE flag is set, - the trigger callback below - must handle the corresponding (pause push/release) commands. - The suspend/resume trigger commands can be defined even without - the RESUME flag. See - Power Management section for details. - - - - When the PCM substreams can be synchronized (typically, - synchronized start/stop of a playback and a capture streams), - you can give SNDRV_PCM_INFO_SYNC_START, - too. In this case, you'll need to check the linked-list of - PCM substreams in the trigger callback. This will be - described in the later section. - - - - - - formats field contains the bit-flags - of supported formats (SNDRV_PCM_FMTBIT_XXX). - If the hardware supports more than one format, give all or'ed - bits. In the example above, the signed 16bit little-endian - format is specified. - - - - - - rates field contains the bit-flags of - supported rates (SNDRV_PCM_RATE_XXX). - When the chip supports continuous rates, pass - CONTINUOUS bit additionally. - The pre-defined rate bits are provided only for typical - rates. If your chip supports unconventional rates, you need to add - the KNOT bit and set up the hardware - constraint manually (explained later). - - - - - - rate_min and - rate_max define the minimum and - maximum sample rate. This should correspond somehow to - rates bits. - - - - - - channel_min and - channel_max - define, as you might already expected, the minimum and maximum - number of channels. - - - - - - buffer_bytes_max defines the - maximum buffer size in bytes. There is no - buffer_bytes_min field, since - it can be calculated from the minimum period size and the - minimum number of periods. - Meanwhile, period_bytes_min and - define the minimum and maximum size of the period in bytes. - periods_max and - periods_min define the maximum and - minimum number of periods in the buffer. - - - - The period is a term that corresponds to - a fragment in the OSS world. The period defines the size at - which a PCM interrupt is generated. This size strongly - depends on the hardware. - Generally, the smaller period size will give you more - interrupts, that is, more controls. - In the case of capture, this size defines the input latency. - On the other hand, the whole buffer size defines the - output latency for the playback direction. - - - - - - There is also a field fifo_size. - This specifies the size of the hardware FIFO, but currently it - is neither used in the driver nor in the alsa-lib. So, you - can ignore this field. - - - - -
- -
- PCM Configurations - - Ok, let's go back again to the PCM runtime records. - The most frequently referred records in the runtime instance are - the PCM configurations. - The PCM configurations are stored in the runtime instance - after the application sends hw_params data via - alsa-lib. There are many fields copied from hw_params and - sw_params structs. For example, - format holds the format type - chosen by the application. This field contains the enum value - SNDRV_PCM_FORMAT_XXX. - - - - One thing to be noted is that the configured buffer and period - sizes are stored in frames in the runtime. - In the ALSA world, 1 frame = channels * samples-size. - For conversion between frames and bytes, you can use the - frames_to_bytes() and - bytes_to_frames() helper functions. - - -period_size); -]]> - - - - - - Also, many software parameters (sw_params) are - stored in frames, too. Please check the type of the field. - snd_pcm_uframes_t is for the frames as unsigned - integer while snd_pcm_sframes_t is for the frames - as signed integer. - -
- -
- DMA Buffer Information - - The DMA buffer is defined by the following four fields, - dma_area, - dma_addr, - dma_bytes and - dma_private. - The dma_area holds the buffer - pointer (the logical address). You can call - memcpy from/to - this pointer. Meanwhile, dma_addr - holds the physical address of the buffer. This field is - specified only when the buffer is a linear buffer. - dma_bytes holds the size of buffer - in bytes. dma_private is used for - the ALSA DMA allocator. - - - - If you use a standard ALSA function, - snd_pcm_lib_malloc_pages(), for - allocating the buffer, these fields are set by the ALSA middle - layer, and you should not change them by - yourself. You can read them but not write them. - On the other hand, if you want to allocate the buffer by - yourself, you'll need to manage it in hw_params callback. - At least, dma_bytes is mandatory. - dma_area is necessary when the - buffer is mmapped. If your driver doesn't support mmap, this - field is not necessary. dma_addr - is also optional. You can use - dma_private as you like, too. - -
- -
- Running Status - - The running status can be referred via runtime->status. - This is the pointer to the struct snd_pcm_mmap_status - record. For example, you can get the current DMA hardware - pointer via runtime->status->hw_ptr. - - - - The DMA application pointer can be referred via - runtime->control, which points to the - struct snd_pcm_mmap_control record. - However, accessing directly to this value is not recommended. - -
- -
- Private Data - - You can allocate a record for the substream and store it in - runtime->private_data. Usually, this - is done in - - the open callback. - Don't mix this with pcm->private_data. - The pcm->private_data usually points to the - chip instance assigned statically at the creation of PCM, while the - runtime->private_data points to a dynamic - data structure created at the PCM open callback. - - - -runtime->private_data = data; - .... - } -]]> - - - - - - The allocated object must be released in - - the close callback. - -
- -
- Interrupt Callbacks - - The field transfer_ack_begin and - transfer_ack_end are called at - the beginning and at the end of - snd_pcm_period_elapsed(), respectively. - -
- -
- -
- Operators - - OK, now let me give details about each pcm callback - (ops). In general, every callback must - return 0 if successful, or a negative error number - such as -EINVAL. To choose an appropriate - error number, it is advised to check what value other parts of - the kernel return when the same kind of request fails. - - - - The callback function takes at least the argument with - snd_pcm_substream pointer. To retrieve - the chip record from the given substream instance, you can use the - following macro. - - - - - - - - The macro reads substream->private_data, - which is a copy of pcm->private_data. - You can override the former if you need to assign different data - records per PCM substream. For example, the cmi8330 driver assigns - different private_data for playback and capture directions, - because it uses two different codecs (SB- and AD-compatible) for - different directions. - - -
- open callback - - - - - - - - This is called when a pcm substream is opened. - - - - At least, here you have to initialize the runtime->hw - record. Typically, this is done by like this: - - - -runtime; - - runtime->hw = snd_mychip_playback_hw; - return 0; - } -]]> - - - - where snd_mychip_playback_hw is the - pre-defined hardware description. - - - - You can allocate a private data in this callback, as described - in - Private Data section. - - - - If the hardware configuration needs more constraints, set the - hardware constraints here, too. - See - Constraints for more details. - -
- -
- close callback - - - - - - - - Obviously, this is called when a pcm substream is closed. - - - - Any private instance for a pcm substream allocated in the - open callback will be released here. - - - -runtime->private_data); - .... - } -]]> - - - -
- -
- ioctl callback - - This is used for any special call to pcm ioctls. But - usually you can pass a generic ioctl callback, - snd_pcm_lib_ioctl. - -
- -
- hw_params callback - - - - - - - - - - This is called when the hardware parameter - (hw_params) is set - up by the application, - that is, once when the buffer size, the period size, the - format, etc. are defined for the pcm substream. - - - - Many hardware setups should be done in this callback, - including the allocation of buffers. - - - - Parameters to be initialized are retrieved by - params_xxx() macros. To allocate - buffer, you can call a helper function, - - - - - - - - snd_pcm_lib_malloc_pages() is available - only when the DMA buffers have been pre-allocated. - See the section - Buffer Types for more details. - - - - Note that this and prepare callbacks - may be called multiple times per initialization. - For example, the OSS emulation may - call these callbacks at each change via its ioctl. - - - - Thus, you need to be careful not to allocate the same buffers - many times, which will lead to memory leaks! Calling the - helper function above many times is OK. It will release the - previous buffer automatically when it was already allocated. - - - - Another note is that this callback is non-atomic - (schedulable). This is important, because the - trigger callback - is atomic (non-schedulable). That is, mutexes or any - schedule-related functions are not available in - trigger callback. - Please see the subsection - - Atomicity for details. - -
- -
- hw_free callback - - - - - - - - - - This is called to release the resources allocated via - hw_params. For example, releasing the - buffer via - snd_pcm_lib_malloc_pages() is done by - calling the following: - - - - - - - - - - This function is always called before the close callback is called. - Also, the callback may be called multiple times, too. - Keep track whether the resource was already released. - -
- -
- prepare callback - - - - - - - - - - This callback is called when the pcm is - prepared. You can set the format type, sample - rate, etc. here. The difference from - hw_params is that the - prepare callback will be called each - time - snd_pcm_prepare() is called, i.e. when - recovering after underruns, etc. - - - - Note that this callback is now non-atomic. - You can use schedule-related functions safely in this callback. - - - - In this and the following callbacks, you can refer to the - values via the runtime record, - substream->runtime. - For example, to get the current - rate, format or channels, access to - runtime->rate, - runtime->format or - runtime->channels, respectively. - The physical address of the allocated buffer is set to - runtime->dma_area. The buffer and period sizes are - in runtime->buffer_size and runtime->period_size, - respectively. - - - - Be careful that this callback will be called many times at - each setup, too. - -
- -
- trigger callback - - - - - - - - This is called when the pcm is started, stopped or paused. - - - - Which action is specified in the second argument, - SNDRV_PCM_TRIGGER_XXX in - <sound/pcm.h>. At least, - the START and STOP - commands must be defined in this callback. - - - - - - - - - - When the pcm supports the pause operation (given in the info - field of the hardware table), the PAUSE_PUSE - and PAUSE_RELEASE commands must be - handled here, too. The former is the command to pause the pcm, - and the latter to restart the pcm again. - - - - When the pcm supports the suspend/resume operation, - regardless of full or partial suspend/resume support, - the SUSPEND and RESUME - commands must be handled, too. - These commands are issued when the power-management status is - changed. Obviously, the SUSPEND and - RESUME commands - suspend and resume the pcm substream, and usually, they - are identical to the STOP and - START commands, respectively. - See the - Power Management section for details. - - - - As mentioned, this callback is atomic. You cannot call - functions which may sleep. - The trigger callback should be as minimal as possible, - just really triggering the DMA. The other stuff should be - initialized hw_params and prepare callbacks properly - beforehand. - -
- -
- pointer callback - - - - - - - - This callback is called when the PCM middle layer inquires - the current hardware position on the buffer. The position must - be returned in frames, - ranging from 0 to buffer_size - 1. - - - - This is called usually from the buffer-update routine in the - pcm middle layer, which is invoked when - snd_pcm_period_elapsed() is called in the - interrupt routine. Then the pcm middle layer updates the - position and calculates the available space, and wakes up the - sleeping poll threads, etc. - - - - This callback is also atomic. - -
- -
- copy and silence callbacks - - These callbacks are not mandatory, and can be omitted in - most cases. These callbacks are used when the hardware buffer - cannot be in the normal memory space. Some chips have their - own buffer on the hardware which is not mappable. In such a - case, you have to transfer the data manually from the memory - buffer to the hardware buffer. Or, if the buffer is - non-contiguous on both physical and virtual memory spaces, - these callbacks must be defined, too. - - - - If these two callbacks are defined, copy and set-silence - operations are done by them. The detailed will be described in - the later section Buffer and Memory - Management. - -
- -
- ack callback - - This callback is also not mandatory. This callback is called - when the appl_ptr is updated in read or write operations. - Some drivers like emu10k1-fx and cs46xx need to track the - current appl_ptr for the internal buffer, and this callback - is useful only for such a purpose. - - - This callback is atomic. - -
- -
- page callback - - - This callback is optional too. This callback is used - mainly for non-contiguous buffers. The mmap calls this - callback to get the page address. Some examples will be - explained in the later section Buffer and Memory - Management, too. - -
-
- -
- Interrupt Handler - - The rest of pcm stuff is the PCM interrupt handler. The - role of PCM interrupt handler in the sound driver is to update - the buffer position and to tell the PCM middle layer when the - buffer position goes across the prescribed period size. To - inform this, call the snd_pcm_period_elapsed() - function. - - - - There are several types of sound chips to generate the interrupts. - - -
- Interrupts at the period (fragment) boundary - - This is the most frequently found type: the hardware - generates an interrupt at each period boundary. - In this case, you can call - snd_pcm_period_elapsed() at each - interrupt. - - - - snd_pcm_period_elapsed() takes the - substream pointer as its argument. Thus, you need to keep the - substream pointer accessible from the chip instance. For - example, define substream field in the chip record to hold the - current running substream pointer, and set the pointer value - at open callback (and reset at close callback). - - - - If you acquire a spinlock in the interrupt handler, and the - lock is used in other pcm callbacks, too, then you have to - release the lock before calling - snd_pcm_period_elapsed(), because - snd_pcm_period_elapsed() calls other pcm - callbacks inside. - - - - Typical code would be like: - - - Interrupt Handler Case #1 - -lock); - .... - if (pcm_irq_invoked(chip)) { - /* call updater, unlock before it */ - spin_unlock(&chip->lock); - snd_pcm_period_elapsed(chip->substream); - spin_lock(&chip->lock); - /* acknowledge the interrupt if necessary */ - } - .... - spin_unlock(&chip->lock); - return IRQ_HANDLED; - } -]]> - - - -
- -
- High frequency timer interrupts - - This happense when the hardware doesn't generate interrupts - at the period boundary but issues timer interrupts at a fixed - timer rate (e.g. es1968 or ymfpci drivers). - In this case, you need to check the current hardware - position and accumulate the processed sample length at each - interrupt. When the accumulated size exceeds the period - size, call - snd_pcm_period_elapsed() and reset the - accumulator. - - - - Typical code would be like the following. - - - Interrupt Handler Case #2 - -lock); - .... - if (pcm_irq_invoked(chip)) { - unsigned int last_ptr, size; - /* get the current hardware pointer (in frames) */ - last_ptr = get_hw_ptr(chip); - /* calculate the processed frames since the - * last update - */ - if (last_ptr < chip->last_ptr) - size = runtime->buffer_size + last_ptr - - chip->last_ptr; - else - size = last_ptr - chip->last_ptr; - /* remember the last updated point */ - chip->last_ptr = last_ptr; - /* accumulate the size */ - chip->size += size; - /* over the period boundary? */ - if (chip->size >= runtime->period_size) { - /* reset the accumulator */ - chip->size %= runtime->period_size; - /* call updater */ - spin_unlock(&chip->lock); - snd_pcm_period_elapsed(substream); - spin_lock(&chip->lock); - } - /* acknowledge the interrupt if necessary */ - } - .... - spin_unlock(&chip->lock); - return IRQ_HANDLED; - } -]]> - - - -
- -
- On calling <function>snd_pcm_period_elapsed()</function> - - In both cases, even if more than one period are elapsed, you - don't have to call - snd_pcm_period_elapsed() many times. Call - only once. And the pcm layer will check the current hardware - pointer and update to the latest status. - -
-
- -
- Atomicity - - One of the most important (and thus difficult to debug) problems - in kernel programming are race conditions. - In the Linux kernel, they are usually avoided via spin-locks, mutexes - or semaphores. In general, if a race condition can happen - in an interrupt handler, it has to be managed atomically, and you - have to use a spinlock to protect the critical session. If the - critical section is not in interrupt handler code and - if taking a relatively long time to execute is acceptable, you - should use mutexes or semaphores instead. - - - - As already seen, some pcm callbacks are atomic and some are - not. For example, the hw_params callback is - non-atomic, while trigger callback is - atomic. This means, the latter is called already in a spinlock - held by the PCM middle layer. Please take this atomicity into - account when you choose a locking scheme in the callbacks. - - - - In the atomic callbacks, you cannot use functions which may call - schedule or go to - sleep. Semaphores and mutexes can sleep, - and hence they cannot be used inside the atomic callbacks - (e.g. trigger callback). - To implement some delay in such a callback, please use - udelay() or mdelay(). - - - - All three atomic callbacks (trigger, pointer, and ack) are - called with local interrupts disabled. - - -
-
- Constraints - - If your chip supports unconventional sample rates, or only the - limited samples, you need to set a constraint for the - condition. - - - - For example, in order to restrict the sample rates in the some - supported values, use - snd_pcm_hw_constraint_list(). - You need to call this function in the open callback. - - - Example of Hardware Constraints - -runtime, 0, - SNDRV_PCM_HW_PARAM_RATE, - &constraints_rates); - if (err < 0) - return err; - .... - } -]]> - - - - - - There are many different constraints. - Look at sound/pcm.h for a complete list. - You can even define your own constraint rules. - For example, let's suppose my_chip can manage a substream of 1 channel - if and only if the format is S16_LE, otherwise it supports any format - specified in the snd_pcm_hardware structure (or in any - other constraint_list). You can build a rule like this: - - - Example of Hardware Constraints for Channels - -min < 2) { - fmt.bits[0] &= SNDRV_PCM_FMTBIT_S16_LE; - return snd_mask_refine(f, &fmt); - } - return 0; - } -]]> - - - - - - Then you need to call this function to add your rule: - - - -runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - hw_rule_channels_by_format, 0, SNDRV_PCM_HW_PARAM_FORMAT, - -1); -]]> - - - - - - The rule function is called when an application sets the number of - channels. But an application can set the format before the number of - channels. Thus you also need to define the inverse rule: - - - Example of Hardware Constraints for Channels - -bits[0] == SNDRV_PCM_FMTBIT_S16_LE) { - ch.min = ch.max = 1; - ch.integer = 1; - return snd_interval_refine(c, &ch); - } - return 0; - } -]]> - - - - - - ...and in the open callback: - - -runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, - hw_rule_format_by_channels, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - -1); -]]> - - - - - - I won't give more details here, rather I - would like to say, Luke, use the source. - -
- - - - - - - - - Control Interface - -
- General - - The control interface is used widely for many switches, - sliders, etc. which are accessed from user-space. Its most - important use is the mixer interface. In other words, since ALSA - 0.9.x, all the mixer stuff is implemented on the control kernel API. - - - - ALSA has a well-defined AC97 control module. If your chip - supports only the AC97 and nothing else, you can skip this - section. - - - - The control API is defined in - <sound/control.h>. - Include this file if you want to add your own controls. - -
- -
- Definition of Controls - - To create a new control, you need to define the - following three - callbacks: info, - get and - put. Then, define a - struct snd_kcontrol_new record, such as: - - - Definition of a Control - - - - - - - - Most likely the control is created via - snd_ctl_new1(), and in such a case, you can - add the __devinitdata prefix to the - definition as above. - - - - The iface field specifies the control - type, SNDRV_CTL_ELEM_IFACE_XXX, which - is usually MIXER. - Use CARD for global controls that are not - logically part of the mixer. - If the control is closely associated with some specific device on - the sound card, use HWDEP, - PCM, RAWMIDI, - TIMER, or SEQUENCER, and - specify the device number with the - device and - subdevice fields. - - - - The name is the name identifier - string. Since ALSA 0.9.x, the control name is very important, - because its role is classified from its name. There are - pre-defined standard control names. The details are described in - the - Control Names subsection. - - - - The index field holds the index number - of this control. If there are several different controls with - the same name, they can be distinguished by the index - number. This is the case when - several codecs exist on the card. If the index is zero, you can - omit the definition above. - - - - The access field contains the access - type of this control. Give the combination of bit masks, - SNDRV_CTL_ELEM_ACCESS_XXX, there. - The details will be explained in - the - Access Flags subsection. - - - - The private_value field contains - an arbitrary long integer value for this record. When using - the generic info, - get and - put callbacks, you can pass a value - through this field. If several small numbers are necessary, you can - combine them in bitwise. Or, it's possible to give a pointer - (casted to unsigned long) of some record to this field, too. - - - - The tlv field can be used to provide - metadata about the control; see the - - Metadata subsection. - - - - The other three are - - callback functions. - -
- -
- Control Names - - There are some standards to define the control names. A - control is usually defined from the three parts as - SOURCE DIRECTION FUNCTION. - - - - The first, SOURCE, specifies the source - of the control, and is a string such as Master, - PCM, CD and - Line. There are many pre-defined sources. - - - - The second, DIRECTION, is one of the - following strings according to the direction of the control: - Playback, Capture, Bypass - Playback and Bypass Capture. Or, it can - be omitted, meaning both playback and capture directions. - - - - The third, FUNCTION, is one of the - following strings according to the function of the control: - Switch, Volume and - Route. - - - - The example of control names are, thus, Master Capture - Switch or PCM Playback Volume. - - - - There are some exceptions: - - -
- Global capture and playback - - Capture Source, Capture Switch - and Capture Volume are used for the global - capture (input) source, switch and volume. Similarly, - Playback Switch and Playback - Volume are used for the global output gain switch and - volume. - -
- -
- Tone-controls - - tone-control switch and volumes are specified like - Tone Control - XXX, e.g. Tone Control - - Switch, Tone Control - Bass, - Tone Control - Center. - -
- -
- 3D controls - - 3D-control switches and volumes are specified like 3D - Control - XXX, e.g. 3D Control - - Switch, 3D Control - Center, 3D - Control - Space. - -
- -
- Mic boost - - Mic-boost switch is set as Mic Boost or - Mic Boost (6dB). - - - - More precise information can be found in - Documentation/sound/alsa/ControlNames.txt. - -
-
- -
- Access Flags - - - The access flag is the bitmask which specifies the access type - of the given control. The default access type is - SNDRV_CTL_ELEM_ACCESS_READWRITE, - which means both read and write are allowed to this control. - When the access flag is omitted (i.e. = 0), it is - considered as READWRITE access as default. - - - - When the control is read-only, pass - SNDRV_CTL_ELEM_ACCESS_READ instead. - In this case, you don't have to define - the put callback. - Similarly, when the control is write-only (although it's a rare - case), you can use the WRITE flag instead, and - you don't need the get callback. - - - - If the control value changes frequently (e.g. the VU meter), - VOLATILE flag should be given. This means - that the control may be changed without - - notification. Applications should poll such - a control constantly. - - - - When the control is inactive, set - the INACTIVE flag, too. - There are LOCK and - OWNER flags to change the write - permissions. - - -
- -
- Callbacks - -
- info callback - - The info callback is used to get - detailed information on this control. This must store the - values of the given struct snd_ctl_elem_info - object. For example, for a boolean control with a single - element: - - - Example of info callback - -type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; - uinfo->count = 1; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; - return 0; - } -]]> - - - - - - The type field specifies the type - of the control. There are BOOLEAN, - INTEGER, ENUMERATED, - BYTES, IEC958 and - INTEGER64. The - count field specifies the - number of elements in this control. For example, a stereo - volume would have count = 2. The - value field is a union, and - the values stored are depending on the type. The boolean and - integer types are identical. - - - - The enumerated type is a bit different from others. You'll - need to set the string for the currently given item index. - - - -type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; - uinfo->count = 1; - uinfo->value.enumerated.items = 4; - if (uinfo->value.enumerated.item > 3) - uinfo->value.enumerated.item = 3; - strcpy(uinfo->value.enumerated.name, - texts[uinfo->value.enumerated.item]); - return 0; - } -]]> - - - - - - Some common info callbacks are available for your convenience: - snd_ctl_boolean_mono_info() and - snd_ctl_boolean_stereo_info(). - Obviously, the former is an info callback for a mono channel - boolean item, just like snd_myctl_mono_info - above, and the latter is for a stereo channel boolean item. - - -
- -
- get callback - - - This callback is used to read the current value of the - control and to return to user-space. - - - - For example, - - - Example of get callback - -value.integer.value[0] = get_some_value(chip); - return 0; - } -]]> - - - - - - The value field depends on - the type of control as well as on the info callback. For example, - the sb driver uses this field to store the register offset, - the bit-shift and the bit-mask. The - private_value field is set as follows: - - - - - - and is retrieved in callbacks like - - -private_value & 0xff; - int shift = (kcontrol->private_value >> 16) & 0xff; - int mask = (kcontrol->private_value >> 24) & 0xff; - .... - } -]]> - - - - - - In the get callback, - you have to fill all the elements if the - control has more than one elements, - i.e. count > 1. - In the example above, we filled only one element - (value.integer.value[0]) since it's - assumed as count = 1. - -
- -
- put callback - - - This callback is used to write a value from user-space. - - - - For example, - - - Example of put callback - -current_value != - ucontrol->value.integer.value[0]) { - change_current_value(chip, - ucontrol->value.integer.value[0]); - changed = 1; - } - return changed; - } -]]> - - - - As seen above, you have to return 1 if the value is - changed. If the value is not changed, return 0 instead. - If any fatal error happens, return a negative error code as - usual. - - - - As in the get callback, - when the control has more than one elements, - all elements must be evaluated in this callback, too. - -
- -
- Callbacks are not atomic - - All these three callbacks are basically not atomic. - -
-
- -
- Constructor - - When everything is ready, finally we can create a new - control. To create a control, there are two functions to be - called, snd_ctl_new1() and - snd_ctl_add(). - - - - In the simplest way, you can do like this: - - - - - - - - where my_control is the - struct snd_kcontrol_new object defined above, and chip - is the object pointer to be passed to - kcontrol->private_data - which can be referred to in callbacks. - - - - snd_ctl_new1() allocates a new - snd_kcontrol instance (that's why the definition - of my_control can be with - the __devinitdata - prefix), and snd_ctl_add assigns the given - control component to the card. - -
- -
- Change Notification - - If you need to change and update a control in the interrupt - routine, you can call snd_ctl_notify(). For - example, - - - - - - - - This function takes the card pointer, the event-mask, and the - control id pointer for the notification. The event-mask - specifies the types of notification, for example, in the above - example, the change of control values is notified. - The id pointer is the pointer of struct snd_ctl_elem_id - to be notified. - You can find some examples in es1938.c or - es1968.c for hardware volume interrupts. - -
- -
- Metadata - - To provide information about the dB values of a mixer control, use - on of the DECLARE_TLV_xxx macros from - <sound/tlv.h> to define a variable - containing this information, set thetlv.p - field to point to this variable, and include the - SNDRV_CTL_ELEM_ACCESS_TLV_READ flag in the - access field; like this: - - - - - - - - - The DECLARE_TLV_DB_SCALE macro defines - information about a mixer control where each step in the control's - value changes the dB value by a constant dB amount. - The first parameter is the name of the variable to be defined. - The second parameter is the minimum value, in units of 0.01 dB. - The third parameter is the step size, in units of 0.01 dB. - Set the fourth parameter to 1 if the minimum value actually mutes - the control. - - - - The DECLARE_TLV_DB_LINEAR macro defines - information about a mixer control where the control's value affects - the output linearly. - The first parameter is the name of the variable to be defined. - The second parameter is the minimum value, in units of 0.01 dB. - The third parameter is the maximum value, in units of 0.01 dB. - If the minimum value mutes the control, set the second parameter to - TLV_DB_GAIN_MUTE. - -
- - - - - - - - - API for AC97 Codec - -
- General - - The ALSA AC97 codec layer is a well-defined one, and you don't - have to write much code to control it. Only low-level control - routines are necessary. The AC97 codec API is defined in - <sound/ac97_codec.h>. - -
- -
- Full Code Example - - - Example of AC97 Interface - -private_data; - .... - /* read a register value here from the codec */ - return the_register_value; - } - - static void snd_mychip_ac97_write(struct snd_ac97 *ac97, - unsigned short reg, unsigned short val) - { - struct mychip *chip = ac97->private_data; - .... - /* write the given register value to the codec */ - } - - static int snd_mychip_ac97(struct mychip *chip) - { - struct snd_ac97_bus *bus; - struct snd_ac97_template ac97; - int err; - static struct snd_ac97_bus_ops ops = { - .write = snd_mychip_ac97_write, - .read = snd_mychip_ac97_read, - }; - - err = snd_ac97_bus(chip->card, 0, &ops, NULL, &bus); - if (err < 0) - return err; - memset(&ac97, 0, sizeof(ac97)); - ac97.private_data = chip; - return snd_ac97_mixer(bus, &ac97, &chip->ac97); - } - -]]> - - - -
- -
- Constructor - - To create an ac97 instance, first call snd_ac97_bus - with an ac97_bus_ops_t record with callback functions. - - - - - - - - The bus record is shared among all belonging ac97 instances. - - - - And then call snd_ac97_mixer() with an - struct snd_ac97_template - record together with the bus pointer created above. - - - -ac97); -]]> - - - - where chip->ac97 is a pointer to a newly created - ac97_t instance. - In this case, the chip pointer is set as the private data, so that - the read/write callback functions can refer to this chip instance. - This instance is not necessarily stored in the chip - record. If you need to change the register values from the - driver, or need the suspend/resume of ac97 codecs, keep this - pointer to pass to the corresponding functions. - -
- -
- Callbacks - - The standard callbacks are read and - write. Obviously they - correspond to the functions for read and write accesses to the - hardware low-level codes. - - - - The read callback returns the - register value specified in the argument. - - - -private_data; - .... - return the_register_value; - } -]]> - - - - Here, the chip can be cast from ac97->private_data. - - - - Meanwhile, the write callback is - used to set the register value. - - - - - - - - - - These callbacks are non-atomic like the control API callbacks. - - - - There are also other callbacks: - reset, - wait and - init. - - - - The reset callback is used to reset - the codec. If the chip requires a special kind of reset, you can - define this callback. - - - - The wait callback is used to - add some waiting time in the standard initialization of the codec. If the - chip requires the extra waiting time, define this callback. - - - - The init callback is used for - additional initialization of the codec. - -
- -
- Updating Registers in The Driver - - If you need to access to the codec from the driver, you can - call the following functions: - snd_ac97_write(), - snd_ac97_read(), - snd_ac97_update() and - snd_ac97_update_bits(). - - - - Both snd_ac97_write() and - snd_ac97_update() functions are used to - set a value to the given register - (AC97_XXX). The difference between them is - that snd_ac97_update() doesn't write a - value if the given value has been already set, while - snd_ac97_write() always rewrites the - value. - - - - - - - - - - snd_ac97_read() is used to read the value - of the given register. For example, - - - - - - - - - - snd_ac97_update_bits() is used to update - some bits in the given register. - - - - - - - - - - Also, there is a function to change the sample rate (of a - given register such as - AC97_PCM_FRONT_DAC_RATE) when VRA or - DRA is supported by the codec: - snd_ac97_set_rate(). - - - - - - - - - - The following registers are available to set the rate: - AC97_PCM_MIC_ADC_RATE, - AC97_PCM_FRONT_DAC_RATE, - AC97_PCM_LR_ADC_RATE, - AC97_SPDIF. When - AC97_SPDIF is specified, the register is - not really changed but the corresponding IEC958 status bits will - be updated. - -
- -
- Clock Adjustment - - In some chips, the clock of the codec isn't 48000 but using a - PCI clock (to save a quartz!). In this case, change the field - bus->clock to the corresponding - value. For example, intel8x0 - and es1968 drivers have their own function to read from the clock. - -
- -
- Proc Files - - The ALSA AC97 interface will create a proc file such as - /proc/asound/card0/codec97#0/ac97#0-0 and - ac97#0-0+regs. You can refer to these files to - see the current status and registers of the codec. - -
- -
- Multiple Codecs - - When there are several codecs on the same card, you need to - call snd_ac97_mixer() multiple times with - ac97.num=1 or greater. The num field - specifies the codec number. - - - - If you set up multiple codecs, you either need to write - different callbacks for each codec or check - ac97->num in the callback routines. - -
- - - - - - - - - MIDI (MPU401-UART) Interface - -
- General - - Many soundcards have built-in MIDI (MPU401-UART) - interfaces. When the soundcard supports the standard MPU401-UART - interface, most likely you can use the ALSA MPU401-UART API. The - MPU401-UART API is defined in - <sound/mpu401.h>. - - - - Some soundchips have a similar but slightly different - implementation of mpu401 stuff. For example, emu10k1 has its own - mpu401 routines. - -
- -
- Constructor - - To create a rawmidi object, call - snd_mpu401_uart_new(). - - - - - - - - - - The first argument is the card pointer, and the second is the - index of this component. You can create up to 8 rawmidi - devices. - - - - The third argument is the type of the hardware, - MPU401_HW_XXX. If it's not a special one, - you can use MPU401_HW_MPU401. - - - - The 4th argument is the I/O port address. Many - backward-compatible MPU401 have an I/O port such as 0x330. Or, it - might be a part of its own PCI I/O region. It depends on the - chip design. - - - - The 5th argument is a bitflag for additional information. - When the I/O port address above is part of the PCI I/O - region, the MPU401 I/O port might have been already allocated - (reserved) by the driver itself. In such a case, pass a bit flag - MPU401_INFO_INTEGRATED, - and the mpu401-uart layer will allocate the I/O ports by itself. - - - - When the controller supports only the input or output MIDI stream, - pass the MPU401_INFO_INPUT or - MPU401_INFO_OUTPUT bitflag, respectively. - Then the rawmidi instance is created as a single stream. - - - - MPU401_INFO_MMIO bitflag is used to change - the access method to MMIO (via readb and writeb) instead of - iob and outb. In this case, you have to pass the iomapped address - to snd_mpu401_uart_new(). - - - - When MPU401_INFO_TX_IRQ is set, the output - stream isn't checked in the default interrupt handler. The driver - needs to call snd_mpu401_uart_interrupt_tx() - by itself to start processing the output stream in the irq handler. - - - - Usually, the port address corresponds to the command port and - port + 1 corresponds to the data port. If not, you may change - the cport field of - struct snd_mpu401 manually - afterward. However, snd_mpu401 pointer is not - returned explicitly by - snd_mpu401_uart_new(). You need to cast - rmidi->private_data to - snd_mpu401 explicitly, - - - -private_data; -]]> - - - - and reset the cport as you like: - - - -cport = my_own_control_port; -]]> - - - - - - The 6th argument specifies the irq number for UART. If the irq - is already allocated, pass 0 to the 7th argument - (irq_flags). Otherwise, pass the flags - for irq allocation - (SA_XXX bits) to it, and the irq will be - reserved by the mpu401-uart layer. If the card doesn't generate - UART interrupts, pass -1 as the irq number. Then a timer - interrupt will be invoked for polling. - -
- -
- Interrupt Handler - - When the interrupt is allocated in - snd_mpu401_uart_new(), the private - interrupt handler is used, hence you don't have anything else to do - than creating the mpu401 stuff. Otherwise, you have to call - snd_mpu401_uart_interrupt() explicitly when - a UART interrupt is invoked and checked in your own interrupt - handler. - - - - In this case, you need to pass the private_data of the - returned rawmidi object from - snd_mpu401_uart_new() as the second - argument of snd_mpu401_uart_interrupt(). - - - -private_data, regs); -]]> - - - -
- - - - - - - - - RawMIDI Interface - -
- Overview - - - The raw MIDI interface is used for hardware MIDI ports that can - be accessed as a byte stream. It is not used for synthesizer - chips that do not directly understand MIDI. - - - - ALSA handles file and buffer management. All you have to do is - to write some code to move data between the buffer and the - hardware. - - - - The rawmidi API is defined in - <sound/rawmidi.h>. - -
- -
- Constructor - - - To create a rawmidi device, call the - snd_rawmidi_new function: - - -card, "MyMIDI", 0, outs, ins, &rmidi); - if (err < 0) - return err; - rmidi->private_data = chip; - strcpy(rmidi->name, "My MIDI"); - rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | - SNDRV_RAWMIDI_INFO_INPUT | - SNDRV_RAWMIDI_INFO_DUPLEX; -]]> - - - - - - The first argument is the card pointer, the second argument is - the ID string. - - - - The third argument is the index of this component. You can - create up to 8 rawmidi devices. - - - - The fourth and fifth arguments are the number of output and - input substreams, respectively, of this device (a substream is - the equivalent of a MIDI port). - - - - Set the info_flags field to specify - the capabilities of the device. - Set SNDRV_RAWMIDI_INFO_OUTPUT if there is - at least one output port, - SNDRV_RAWMIDI_INFO_INPUT if there is at - least one input port, - and SNDRV_RAWMIDI_INFO_DUPLEX if the device - can handle output and input at the same time. - - - - After the rawmidi device is created, you need to set the - operators (callbacks) for each substream. There are helper - functions to set the operators for all the substreams of a device: - - - - - - - - - The operators are usually defined like this: - - - - - - These callbacks are explained in the Callbacks - section. - - - - If there are more than one substream, you should give a - unique name to each of them: - - -streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams, - list { - sprintf(substream->name, "My MIDI Port %d", substream->number + 1); - } - /* same for SNDRV_RAWMIDI_STREAM_INPUT */ -]]> - - - -
- -
- Callbacks - - - In all the callbacks, the private data that you've set for the - rawmidi device can be accessed as - substream->rmidi->private_data. - - - - - If there is more than one port, your callbacks can determine the - port index from the struct snd_rawmidi_substream data passed to each - callback: - - -number; -]]> - - - - -
- <function>open</function> callback - - - - - - - - - This is called when a substream is opened. - You can initialize the hardware here, but you shouldn't - start transmitting/receiving data yet. - -
- -
- <function>close</function> callback - - - - - - - - - Guess what. - - - - The open and close - callbacks of a rawmidi device are serialized with a mutex, - and can sleep. - -
- -
- <function>trigger</function> callback for output - substreams - - - - - - - - - This is called with a nonzero up - parameter when there is some data in the substream buffer that - must be transmitted. - - - - To read data from the buffer, call - snd_rawmidi_transmit_peek. It will - return the number of bytes that have been read; this will be - less than the number of bytes requested when there are no more - data in the buffer. - After the data have been transmitted successfully, call - snd_rawmidi_transmit_ack to remove the - data from the substream buffer: - - - - - - - - - If you know beforehand that the hardware will accept data, you - can use the snd_rawmidi_transmit function - which reads some data and removes them from the buffer at once: - - - - - - - - - If you know beforehand how many bytes you can accept, you can - use a buffer size greater than one with the - snd_rawmidi_transmit* functions. - - - - The trigger callback must not sleep. If - the hardware FIFO is full before the substream buffer has been - emptied, you have to continue transmitting data later, either - in an interrupt handler, or with a timer if the hardware - doesn't have a MIDI transmit interrupt. - - - - The trigger callback is called with a - zero up parameter when the transmission - of data should be aborted. - -
- -
- <function>trigger</function> callback for input - substreams - - - - - - - - - This is called with a nonzero up - parameter to enable receiving data, or with a zero - up parameter do disable receiving data. - - - - The trigger callback must not sleep; the - actual reading of data from the device is usually done in an - interrupt handler. - - - - When data reception is enabled, your interrupt handler should - call snd_rawmidi_receive for all received - data: - - - - - - -
- -
- <function>drain</function> callback - - - - - - - - - This is only used with output substreams. This function should wait - until all data read from the substream buffer have been transmitted. - This ensures that the device can be closed and the driver unloaded - without losing data. - - - - This callback is optional. If you do not set - drain in the struct snd_rawmidi_ops - structure, ALSA will simply wait for 50 milliseconds - instead. - -
-
- - - - - - - - - Miscellaneous Devices - -
- FM OPL3 - - The FM OPL3 is still used in many chips (mainly for backward - compatibility). ALSA has a nice OPL3 FM control layer, too. The - OPL3 API is defined in - <sound/opl3.h>. - - - - FM registers can be directly accessed through the direct-FM API, - defined in <sound/asound_fm.h>. In - ALSA native mode, FM registers are accessed through - the Hardware-Dependant Device direct-FM extension API, whereas in - OSS compatible mode, FM registers can be accessed with the OSS - direct-FM compatible API in /dev/dmfmX device. - - - - To create the OPL3 component, you have two functions to - call. The first one is a constructor for the opl3_t - instance. - - - - - - - - - - The first argument is the card pointer, the second one is the - left port address, and the third is the right port address. In - most cases, the right port is placed at the left port + 2. - - - - The fourth argument is the hardware type. - - - - When the left and right ports have been already allocated by - the card driver, pass non-zero to the fifth argument - (integrated). Otherwise, the opl3 module will - allocate the specified ports by itself. - - - - When the accessing the hardware requires special method - instead of the standard I/O access, you can create opl3 instance - separately with snd_opl3_new(). - - - - - - - - - - Then set command, - private_data and - private_free for the private - access function, the private data and the destructor. - The l_port and r_port are not necessarily set. Only the - command must be set properly. You can retrieve the data - from the opl3->private_data field. - - - - After creating the opl3 instance via snd_opl3_new(), - call snd_opl3_init() to initialize the chip to the - proper state. Note that snd_opl3_create() always - calls it internally. - - - - If the opl3 instance is created successfully, then create a - hwdep device for this opl3. - - - - - - - - - - The first argument is the opl3_t instance you - created, and the second is the index number, usually 0. - - - - The third argument is the index-offset for the sequencer - client assigned to the OPL3 port. When there is an MPU401-UART, - give 1 for here (UART always takes 0). - -
- -
- Hardware-Dependent Devices - - Some chips need user-space access for special - controls or for loading the micro code. In such a case, you can - create a hwdep (hardware-dependent) device. The hwdep API is - defined in <sound/hwdep.h>. You can - find examples in opl3 driver or - isa/sb/sb16_csp.c. - - - - The creation of the hwdep instance is done via - snd_hwdep_new(). - - - - - - - - where the third argument is the index number. - - - - You can then pass any pointer value to the - private_data. - If you assign a private data, you should define the - destructor, too. The destructor function is set in - the private_free field. - - - -private_data = p; - hw->private_free = mydata_free; -]]> - - - - and the implementation of the destructor would be: - - - -private_data; - kfree(p); - } -]]> - - - - - - The arbitrary file operations can be defined for this - instance. The file operators are defined in - the ops table. For example, assume that - this chip needs an ioctl. - - - -ops.open = mydata_open; - hw->ops.ioctl = mydata_ioctl; - hw->ops.release = mydata_release; -]]> - - - - And implement the callback functions as you like. - -
- -
- IEC958 (S/PDIF) - - Usually the controls for IEC958 devices are implemented via - the control interface. There is a macro to compose a name string for - IEC958 controls, SNDRV_CTL_NAME_IEC958() - defined in <include/asound.h>. - - - - There are some standard controls for IEC958 status bits. These - controls use the type SNDRV_CTL_ELEM_TYPE_IEC958, - and the size of element is fixed as 4 bytes array - (value.iec958.status[x]). For the info - callback, you don't specify - the value field for this type (the count field must be set, - though). - - - - IEC958 Playback Con Mask is used to return the - bit-mask for the IEC958 status bits of consumer mode. Similarly, - IEC958 Playback Pro Mask returns the bitmask for - professional mode. They are read-only controls, and are defined - as MIXER controls (iface = - SNDRV_CTL_ELEM_IFACE_MIXER). - - - - Meanwhile, IEC958 Playback Default control is - defined for getting and setting the current default IEC958 - bits. Note that this one is usually defined as a PCM control - (iface = SNDRV_CTL_ELEM_IFACE_PCM), - although in some places it's defined as a MIXER control. - - - - In addition, you can define the control switches to - enable/disable or to set the raw bit mode. The implementation - will depend on the chip, but the control should be named as - IEC958 xxx, preferably using - the SNDRV_CTL_NAME_IEC958() macro. - - - - You can find several cases, for example, - pci/emu10k1, - pci/ice1712, or - pci/cmipci.c. - -
- - - - - - - - - Buffer and Memory Management - -
- Buffer Types - - ALSA provides several different buffer allocation functions - depending on the bus and the architecture. All these have a - consistent API. The allocation of physically-contiguous pages is - done via - snd_malloc_xxx_pages() function, where xxx - is the bus type. - - - - The allocation of pages with fallback is - snd_malloc_xxx_pages_fallback(). This - function tries to allocate the specified pages but if the pages - are not available, it tries to reduce the page sizes until - enough space is found. - - - - The release the pages, call - snd_free_xxx_pages() function. - - - - Usually, ALSA drivers try to allocate and reserve - a large contiguous physical space - at the time the module is loaded for the later use. - This is called pre-allocation. - As already written, you can call the following function at - pcm instance construction time (in the case of PCI bus). - - - - - - - - where size is the byte size to be - pre-allocated and the max is the maximum - size to be changed via the prealloc proc file. - The allocator will try to get an area as large as possible - within the given size. - - - - The second argument (type) and the third argument (device pointer) - are dependent on the bus. - In the case of the ISA bus, pass snd_dma_isa_data() - as the third argument with SNDRV_DMA_TYPE_DEV type. - For the continuous buffer unrelated to the bus can be pre-allocated - with SNDRV_DMA_TYPE_CONTINUOUS type and the - snd_dma_continuous_data(GFP_KERNEL) device pointer, - where GFP_KERNEL is the kernel allocation flag to - use. - For the PCI scatter-gather buffers, use - SNDRV_DMA_TYPE_DEV_SG with - snd_dma_pci_data(pci) - (see the - Non-Contiguous Buffers - section). - - - - Once the buffer is pre-allocated, you can use the - allocator in the hw_params callback: - - - - - - - - Note that you have to pre-allocate to use this function. - -
- -
- External Hardware Buffers - - Some chips have their own hardware buffers and the DMA - transfer from the host memory is not available. In such a case, - you need to either 1) copy/set the audio data directly to the - external hardware buffer, or 2) make an intermediate buffer and - copy/set the data from it to the external hardware buffer in - interrupts (or in tasklets, preferably). - - - - The first case works fine if the external hardware buffer is large - enough. This method doesn't need any extra buffers and thus is - more effective. You need to define the - copy and - silence callbacks for - the data transfer. However, there is a drawback: it cannot - be mmapped. The examples are GUS's GF1 PCM or emu8000's - wavetable PCM. - - - - The second case allows for mmap on the buffer, although you have - to handle an interrupt or a tasklet to transfer the data - from the intermediate buffer to the hardware buffer. You can find an - example in the vxpocket driver. - - - - Another case is when the chip uses a PCI memory-map - region for the buffer instead of the host memory. In this case, - mmap is available only on certain architectures like the Intel one. - In non-mmap mode, the data cannot be transferred as in the normal - way. Thus you need to define the copy and - silence callbacks as well, - as in the cases above. The examples are found in - rme32.c and rme96.c. - - - - The implementation of the copy and - silence callbacks depends upon - whether the hardware supports interleaved or non-interleaved - samples. The copy callback is - defined like below, a bit - differently depending whether the direction is playback or - capture: - - - - - - - - - - In the case of interleaved samples, the second argument - (channel) is not used. The third argument - (pos) points the - current position offset in frames. - - - - The meaning of the fourth argument is different between - playback and capture. For playback, it holds the source data - pointer, and for capture, it's the destination data pointer. - - - - The last argument is the number of frames to be copied. - - - - What you have to do in this callback is again different - between playback and capture directions. In the - playback case, you copy the given amount of data - (count) at the specified pointer - (src) to the specified offset - (pos) on the hardware buffer. When - coded like memcpy-like way, the copy would be like: - - - - - - - - - - For the capture direction, you copy the given amount of - data (count) at the specified offset - (pos) on the hardware buffer to the - specified pointer (dst). - - - - - - - - Note that both the position and the amount of data are given - in frames. - - - - In the case of non-interleaved samples, the implementation - will be a bit more complicated. - - - - You need to check the channel argument, and if it's -1, copy - the whole channels. Otherwise, you have to copy only the - specified channel. Please check - isa/gus/gus_pcm.c as an example. - - - - The silence callback is also - implemented in a similar way. - - - - - - - - - - The meanings of arguments are the same as in the - copy - callback, although there is no src/dst - argument. In the case of interleaved samples, the channel - argument has no meaning, as well as on - copy callback. - - - - The role of silence callback is to - set the given amount - (count) of silence data at the - specified offset (pos) on the hardware - buffer. Suppose that the data format is signed (that is, the - silent-data is 0), and the implementation using a memset-like - function would be like: - - - - - - - - - - In the case of non-interleaved samples, again, the - implementation becomes a bit more complicated. See, for example, - isa/gus/gus_pcm.c. - -
- -
- Non-Contiguous Buffers - - If your hardware supports the page table as in emu10k1 or the - buffer descriptors as in via82xx, you can use the scatter-gather - (SG) DMA. ALSA provides an interface for handling SG-buffers. - The API is provided in <sound/pcm.h>. - - - - For creating the SG-buffer handler, call - snd_pcm_lib_preallocate_pages() or - snd_pcm_lib_preallocate_pages_for_all() - with SNDRV_DMA_TYPE_DEV_SG - in the PCM constructor like other PCI pre-allocator. - You need to pass snd_dma_pci_data(pci), - where pci is the struct pci_dev pointer - of the chip as well. - The struct snd_sg_buf instance is created as - substream->dma_private. You can cast - the pointer like: - - - -dma_private; -]]> - - - - - - Then call snd_pcm_lib_malloc_pages() - in the hw_params callback - as well as in the case of normal PCI buffer. - The SG-buffer handler will allocate the non-contiguous kernel - pages of the given size and map them onto the virtually contiguous - memory. The virtual pointer is addressed in runtime->dma_area. - The physical address (runtime->dma_addr) is set to zero, - because the buffer is physically non-contigous. - The physical address table is set up in sgbuf->table. - You can get the physical address at a certain offset via - snd_pcm_sgbuf_get_addr(). - - - - When a SG-handler is used, you need to set - snd_pcm_sgbuf_ops_page as - the page callback. - (See - page callback section.) - - - - To release the data, call - snd_pcm_lib_free_pages() in the - hw_free callback as usual. - -
- -
- Vmalloc'ed Buffers - - It's possible to use a buffer allocated via - vmalloc, for example, for an intermediate - buffer. Since the allocated pages are not contiguous, you need - to set the page callback to obtain - the physical address at every offset. - - - - The implementation of page callback - would be like this: - - - - - - /* get the physical page pointer on the given offset */ - static struct page *mychip_page(struct snd_pcm_substream *substream, - unsigned long offset) - { - void *pageptr = substream->runtime->dma_area + offset; - return vmalloc_to_page(pageptr); - } -]]> - - - -
- - - - - - - - - Proc Interface - - ALSA provides an easy interface for procfs. The proc files are - very useful for debugging. I recommend you set up proc files if - you write a driver and want to get a running status or register - dumps. The API is found in - <sound/info.h>. - - - - To create a proc file, call - snd_card_proc_new(). - - - - - - - - where the second argument specifies the name of the proc file to be - created. The above example will create a file - my-file under the card directory, - e.g. /proc/asound/card0/my-file. - - - - Like other components, the proc entry created via - snd_card_proc_new() will be registered and - released automatically in the card registration and release - functions. - - - - When the creation is successful, the function stores a new - instance in the pointer given in the third argument. - It is initialized as a text proc file for read only. To use - this proc file as a read-only text file as it is, set the read - callback with a private data via - snd_info_set_text_ops(). - - - - - - - - where the second argument (chip) is the - private data to be used in the callbacks. The third parameter - specifies the read buffer size and the fourth - (my_proc_read) is the callback function, which - is defined like - - - - - - - - - - - In the read callback, use snd_iprintf() for - output strings, which works just like normal - printf(). For example, - - - -private_data; - - snd_iprintf(buffer, "This is my chip!\n"); - snd_iprintf(buffer, "Port = %ld\n", chip->port); - } -]]> - - - - - - The file permissions can be changed afterwards. As default, it's - set as read only for all users. If you want to add write - permission for the user (root as default), do as follows: - - - -mode = S_IFREG | S_IRUGO | S_IWUSR; -]]> - - - - and set the write buffer size and the callback - - - -c.text.write = my_proc_write; -]]> - - - - - - For the write callback, you can use - snd_info_get_line() to get a text line, and - snd_info_get_str() to retrieve a string from - the line. Some examples are found in - core/oss/mixer_oss.c, core/oss/and - pcm_oss.c. - - - - For a raw-data proc-file, set the attributes as follows: - - - -content = SNDRV_INFO_CONTENT_DATA; - entry->private_data = chip; - entry->c.ops = &my_file_io_ops; - entry->size = 4096; - entry->mode = S_IFREG | S_IRUGO; -]]> - - - - - - The callback is much more complicated than the text-file - version. You need to use a low-level I/O functions such as - copy_from/to_user() to transfer the - data. - - - - local_max_size) - size = local_max_size - pos; - if (copy_to_user(buf, local_data + pos, size)) - return -EFAULT; - return size; - } -]]> - - - - - - - - - - - - Power Management - - If the chip is supposed to work with suspend/resume - functions, you need to add power-management code to the - driver. The additional code for power-management should be - ifdef'ed with - CONFIG_PM. - - - - If the driver fully supports suspend/resume - that is, the device can be - properly resumed to its state when suspend was called, - you can set the SNDRV_PCM_INFO_RESUME flag - in the pcm info field. Usually, this is possible when the - registers of the chip can be safely saved and restored to - RAM. If this is set, the trigger callback is called with - SNDRV_PCM_TRIGGER_RESUME after the resume - callback completes. - - - - Even if the driver doesn't support PM fully but - partial suspend/resume is still possible, it's still worthy to - implement suspend/resume callbacks. In such a case, applications - would reset the status by calling - snd_pcm_prepare() and restart the stream - appropriately. Hence, you can define suspend/resume callbacks - below but don't set SNDRV_PCM_INFO_RESUME - info flag to the PCM. - - - - Note that the trigger with SUSPEND can always be called when - snd_pcm_suspend_all is called, - regardless of the SNDRV_PCM_INFO_RESUME flag. - The RESUME flag affects only the behavior - of snd_pcm_resume(). - (Thus, in theory, - SNDRV_PCM_TRIGGER_RESUME isn't needed - to be handled in the trigger callback when no - SNDRV_PCM_INFO_RESUME flag is set. But, - it's better to keep it for compatibility reasons.) - - - In the earlier version of ALSA drivers, a common - power-management layer was provided, but it has been removed. - The driver needs to define the suspend/resume hooks according to - the bus the device is connected to. In the case of PCI drivers, the - callbacks look like below: - - - - - - - - - - The scheme of the real suspend job is as follows. - - - Retrieve the card and the chip data. - Call snd_power_change_state() with - SNDRV_CTL_POWER_D3hot to change the - power status. - Call snd_pcm_suspend_all() to suspend the running PCM streams. - If AC97 codecs are used, call - snd_ac97_suspend() for each codec. - Save the register values if necessary. - Stop the hardware if necessary. - Disable the PCI device by calling - pci_disable_device(). Then, call - pci_save_state() at last. - - - - - A typical code would be like: - - - -private_data; - /* (2) */ - snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); - /* (3) */ - snd_pcm_suspend_all(chip->pcm); - /* (4) */ - snd_ac97_suspend(chip->ac97); - /* (5) */ - snd_mychip_save_registers(chip); - /* (6) */ - snd_mychip_stop_hardware(chip); - /* (7) */ - pci_disable_device(pci); - pci_save_state(pci); - return 0; - } -]]> - - - - - - The scheme of the real resume job is as follows. - - - Retrieve the card and the chip data. - Set up PCI. First, call pci_restore_state(). - Then enable the pci device again by calling pci_enable_device(). - Call pci_set_master() if necessary, too. - Re-initialize the chip. - Restore the saved registers if necessary. - Resume the mixer, e.g. calling - snd_ac97_resume(). - Restart the hardware (if any). - Call snd_power_change_state() with - SNDRV_CTL_POWER_D0 to notify the processes. - - - - - A typical code would be like: - - - -private_data; - /* (2) */ - pci_restore_state(pci); - pci_enable_device(pci); - pci_set_master(pci); - /* (3) */ - snd_mychip_reinit_chip(chip); - /* (4) */ - snd_mychip_restore_registers(chip); - /* (5) */ - snd_ac97_resume(chip->ac97); - /* (6) */ - snd_mychip_restart_chip(chip); - /* (7) */ - snd_power_change_state(card, SNDRV_CTL_POWER_D0); - return 0; - } -]]> - - - - - - As shown in the above, it's better to save registers after - suspending the PCM operations via - snd_pcm_suspend_all() or - snd_pcm_suspend(). It means that the PCM - streams are already stoppped when the register snapshot is - taken. But, remember that you don't have to restart the PCM - stream in the resume callback. It'll be restarted via - trigger call with SNDRV_PCM_TRIGGER_RESUME - when necessary. - - - - OK, we have all callbacks now. Let's set them up. In the - initialization of the card, make sure that you can get the chip - data from the card instance, typically via - private_data field, in case you - created the chip data individually. - - - -private_data = chip; - .... - } -]]> - - - - When you created the chip data with - snd_card_create(), it's anyway accessible - via private_data field. - - - -private_data; - .... - } -]]> - - - - - - - If you need a space to save the registers, allocate the - buffer for it here, too, since it would be fatal - if you cannot allocate a memory in the suspend phase. - The allocated buffer should be released in the corresponding - destructor. - - - - And next, set suspend/resume callbacks to the pci_driver. - - - - - - - - - - - - - - - - Module Parameters - - There are standard module options for ALSA. At least, each - module should have the index, - id and enable - options. - - - - If the module supports multiple cards (usually up to - 8 = SNDRV_CARDS cards), they should be - arrays. The default initial values are defined already as - constants for easier programming: - - - - - - - - - - If the module supports only a single card, they could be single - variables, instead. enable option is not - always necessary in this case, but it would be better to have a - dummy option for compatibility. - - - - The module parameters must be declared with the standard - module_param()(), - module_param_array()() and - MODULE_PARM_DESC() macros. - - - - The typical coding would be like below: - - - - - - - - - - Also, don't forget to define the module description, classes, - license and devices. Especially, the recent modprobe requires to - define the module license as GPL, etc., otherwise the system is - shown as tainted. - - - - - - - - - - - - - - - - How To Put Your Driver Into ALSA Tree -
- General - - So far, you've learned how to write the driver codes. - And you might have a question now: how to put my own - driver into the ALSA driver tree? - Here (finally :) the standard procedure is described briefly. - - - - Suppose that you create a new PCI driver for the card - xyz. The card module name would be - snd-xyz. The new driver is usually put into the alsa-driver - tree, alsa-driver/pci directory in - the case of PCI cards. - Then the driver is evaluated, audited and tested - by developers and users. After a certain time, the driver - will go to the alsa-kernel tree (to the corresponding directory, - such as alsa-kernel/pci) and eventually - will be integrated into the Linux 2.6 tree (the directory would be - linux/sound/pci). - - - - In the following sections, the driver code is supposed - to be put into alsa-driver tree. The two cases are covered: - a driver consisting of a single source file and one consisting - of several source files. - -
- -
- Driver with A Single Source File - - - - - Modify alsa-driver/pci/Makefile - - - - Suppose you have a file xyz.c. Add the following - two lines - - - - - - - - - - - Create the Kconfig entry - - - - Add the new entry of Kconfig for your xyz driver. - - - - - - - the line, select SND_PCM, specifies that the driver xyz supports - PCM. In addition to SND_PCM, the following components are - supported for select command: - SND_RAWMIDI, SND_TIMER, SND_HWDEP, SND_MPU401_UART, - SND_OPL3_LIB, SND_OPL4_LIB, SND_VX_LIB, SND_AC97_CODEC. - Add the select command for each supported component. - - - - Note that some selections imply the lowlevel selections. - For example, PCM includes TIMER, MPU401_UART includes RAWMIDI, - AC97_CODEC includes PCM, and OPL3_LIB includes HWDEP. - You don't need to give the lowlevel selections again. - - - - For the details of Kconfig script, refer to the kbuild - documentation. - - - - - - - Run cvscompile script to re-generate the configure script and - build the whole stuff again. - - - - -
- -
- Drivers with Several Source Files - - Suppose that the driver snd-xyz have several source files. - They are located in the new subdirectory, - pci/xyz. - - - - - Add a new directory (xyz) in - alsa-driver/pci/Makefile as below - - - - - - - - - - - - Under the directory xyz, create a Makefile - - - Sample Makefile for a driver xyz - - - - - - - - - - Create the Kconfig entry - - - - This procedure is as same as in the last section. - - - - - - Run cvscompile script to re-generate the configure script and - build the whole stuff again. - - - - -
- - - - - - - - Useful Functions - -
- <function>snd_printk()</function> and friends - - ALSA provides a verbose version of the - printk() function. If a kernel config - CONFIG_SND_VERBOSE_PRINTK is set, this - function prints the given message together with the file name - and the line of the caller. The KERN_XXX - prefix is processed as - well as the original printk() does, so it's - recommended to add this prefix, e.g. - - - - - - - - - - There are also printk()'s for - debugging. snd_printd() can be used for - general debugging purposes. If - CONFIG_SND_DEBUG is set, this function is - compiled, and works just like - snd_printk(). If the ALSA is compiled - without the debugging flag, it's ignored. - - - - snd_printdd() is compiled in only when - CONFIG_SND_DEBUG_VERBOSE is set. Please note - that CONFIG_SND_DEBUG_VERBOSE is not set as default - even if you configure the alsa-driver with - option. You need to give - explicitly option instead. - -
- -
- <function>snd_BUG()</function> - - It shows the BUG? message and - stack trace as well as snd_BUG_ON at the point. - It's useful to show that a fatal error happens there. - - - When no debug flag is set, this macro is ignored. - -
- -
- <function>snd_BUG_ON()</function> - - snd_BUG_ON() macro is similar with - WARN_ON() macro. For example, - - - - - - - - or it can be used as the condition, - - - - - - - - - - The macro takes an conditional expression to evaluate. - When CONFIG_SND_DEBUG, is set, the - expression is actually evaluated. If it's non-zero, it shows - the warning message such as - BUG? (xxx) - normally followed by stack trace. It returns the evaluated - value. - When no CONFIG_SND_DEBUG is set, this - macro always returns zero. - - -
- - - - - - - - - Acknowledgments - - I would like to thank Phil Kerr for his help for improvement and - corrections of this document. - - - Kevin Conder reformatted the original plain-text to the - DocBook format. - - - Giuliano Pochini corrected typos and contributed the example codes - in the hardware constraints section. - - - -- cgit v1.2.3 From 6d5b5acca9e566515ef3f1ed617e7295c4f94345 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 9 Mar 2009 13:31:59 +0100 Subject: Fix fixpoint divide exception in acct_update_integrals Frans Pop reported the crash below when running an s390 kernel under Hercules: Kernel BUG at 000738b4 verbose debug info unavailable! fixpoint divide exception: 0009 #1! SMP Modules linked in: nfs lockd nfs_acl sunrpc ctcm fsm tape_34xx cu3088 tape ccwgroup tape_class ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod dasd_eckd_mod dasd_mod CPU: 0 Not tainted 2.6.27.19 #13 Process awk (pid: 2069, task: 0f9ed9b8, ksp: 0f4f7d18) Krnl PSW : 070c1000 800738b4 (acct_update_integrals+0x4c/0x118) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 Krnl GPRS: 00000000 000007d0 7fffffff fffff830 00000000 ffffffff 00000002 0f9ed9b8 00000000 00008ca0 00000000 0f9ed9b8 0f9edda4 8007386e 0f4f7ec8 0f4f7e98 Krnl Code: 800738aa: a71807d0 lhi %r1,2000 800738ae: 8c200001 srdl %r2,1 800738b2: 1d21 dr %r2,%r1 >800738b4: 5810d10e l %r1,270(%r13) 800738b8: 1823 lr %r2,%r3 800738ba: 4130f060 la %r3,96(%r15) 800738be: 0de1 basr %r14,%r1 800738c0: 5800f060 l %r0,96(%r15) Call Trace: ( <000000000004fdea>! blocking_notifier_call_chain+0x1e/0x2c) <0000000000038502>! do_exit+0x106/0x7c0 <0000000000038c36>! do_group_exit+0x7a/0xb4 <0000000000038c8e>! SyS_exit_group+0x1e/0x30 <0000000000021c28>! sysc_do_restart+0x12/0x16 <0000000077e7e924>! 0x77e7e924 Reason for this is that cpu time accounting usually only happens from interrupt context, but acct_update_integrals gets also called from process context with interrupts enabled. So in acct_update_integrals we may end up with the following scenario: Between reading tsk->stime/tsk->utime and tsk->acct_timexpd an interrupt happens which updates accouting values. This causes acct_timexpd to be greater than the former stime + utime. The subsequent calculation of dtime = cputime_sub(time, tsk->acct_timexpd); will be negative and the division performed by cputime_to_jiffies(dtime) will generate an exception since the result won't fit into a 32 bit register. In order to fix this just always disable interrupts while accessing any of the accounting values. Reported by: Frans Pop Tested by: Frans Pop Cc: stable@kernel.org Cc: Martin Schwidefsky Signed-off-by: Heiko Carstens Signed-off-by: Linus Torvalds --- kernel/tsacct.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/tsacct.c b/kernel/tsacct.c index 43f891b05a4b..00d59d048edf 100644 --- a/kernel/tsacct.c +++ b/kernel/tsacct.c @@ -122,8 +122,10 @@ void acct_update_integrals(struct task_struct *tsk) if (likely(tsk->mm)) { cputime_t time, dtime; struct timeval value; + unsigned long flags; u64 delta; + local_irq_save(flags); time = tsk->stime + tsk->utime; dtime = cputime_sub(time, tsk->acct_timexpd); jiffies_to_timeval(cputime_to_jiffies(dtime), &value); @@ -131,10 +133,12 @@ void acct_update_integrals(struct task_struct *tsk) delta = delta * USEC_PER_SEC + value.tv_usec; if (delta == 0) - return; + goto out; tsk->acct_timexpd = time; tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm); tsk->acct_vm_mem1 += delta * tsk->mm->total_vm; + out: + local_irq_restore(flags); } } -- cgit v1.2.3 From b9447ef80bd301b932ac4d85c9622e929de5fd62 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 9 Mar 2009 11:45:38 -0400 Subject: Btrfs: fix spinlock assertions on UP systems btrfs_tree_locked was being used to make sure a given extent_buffer was properly locked in a few places. But, it wasn't correct for UP compiled kernels. This switches it to using assert_spin_locked instead, and renames it to btrfs_assert_tree_locked to better reflect how it was really being used. Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 10 +++++----- fs/btrfs/disk-io.c | 4 ++-- fs/btrfs/extent-tree.c | 4 ++-- fs/btrfs/locking.c | 6 +++--- fs/btrfs/locking.h | 2 +- 5 files changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 42491d728e99..37f31b5529aa 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -277,7 +277,7 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans, if (*cow_ret == buf) unlock_orig = 1; - WARN_ON(!btrfs_tree_locked(buf)); + btrfs_assert_tree_locked(buf); if (parent) parent_start = parent->start; @@ -2365,7 +2365,7 @@ static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root if (slot >= btrfs_header_nritems(upper) - 1) return 1; - WARN_ON(!btrfs_tree_locked(path->nodes[1])); + btrfs_assert_tree_locked(path->nodes[1]); right = read_node_slot(root, upper, slot + 1); btrfs_tree_lock(right); @@ -2562,7 +2562,7 @@ static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root if (right_nritems == 0) return 1; - WARN_ON(!btrfs_tree_locked(path->nodes[1])); + btrfs_assert_tree_locked(path->nodes[1]); left = read_node_slot(root, path->nodes[1], slot - 1); btrfs_tree_lock(left); @@ -4101,7 +4101,7 @@ int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path) next = read_node_slot(root, c, slot); if (!path->skip_locking) { - WARN_ON(!btrfs_tree_locked(c)); + btrfs_assert_tree_locked(c); btrfs_tree_lock(next); btrfs_set_lock_blocking(next); } @@ -4126,7 +4126,7 @@ int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path) reada_for_search(root, path, level, slot, 0); next = read_node_slot(root, next, 0); if (!path->skip_locking) { - WARN_ON(!btrfs_tree_locked(path->nodes[level])); + btrfs_assert_tree_locked(path->nodes[level]); btrfs_tree_lock(next); btrfs_set_lock_blocking(next); } diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index adda739a0215..3e18175248e0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -857,7 +857,7 @@ int clean_tree_block(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *btree_inode = root->fs_info->btree_inode; if (btrfs_header_generation(buf) == root->fs_info->running_transaction->transid) { - WARN_ON(!btrfs_tree_locked(buf)); + btrfs_assert_tree_locked(buf); /* ugh, clear_extent_buffer_dirty can be expensive */ btrfs_set_lock_blocking(buf); @@ -2361,7 +2361,7 @@ void btrfs_mark_buffer_dirty(struct extent_buffer *buf) btrfs_set_lock_blocking(buf); - WARN_ON(!btrfs_tree_locked(buf)); + btrfs_assert_tree_locked(buf); if (transid != root->fs_info->generation) { printk(KERN_CRIT "btrfs transid mismatch buffer %llu, " "found %llu running %llu\n", diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 6b5966aacf44..9abf81f71c46 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4418,13 +4418,13 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans, path = btrfs_alloc_path(); BUG_ON(!path); - BUG_ON(!btrfs_tree_locked(parent)); + btrfs_assert_tree_locked(parent); parent_level = btrfs_header_level(parent); extent_buffer_get(parent); path->nodes[parent_level] = parent; path->slots[parent_level] = btrfs_header_nritems(parent); - BUG_ON(!btrfs_tree_locked(node)); + btrfs_assert_tree_locked(node); level = btrfs_header_level(node); extent_buffer_get(node); path->nodes[level] = node; diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c index 85506c4a3af7..47b0a88c12a2 100644 --- a/fs/btrfs/locking.c +++ b/fs/btrfs/locking.c @@ -220,8 +220,8 @@ int btrfs_tree_unlock(struct extent_buffer *eb) return 0; } -int btrfs_tree_locked(struct extent_buffer *eb) +void btrfs_assert_tree_locked(struct extent_buffer *eb) { - return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) || - spin_is_locked(&eb->lock); + if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags)) + assert_spin_locked(&eb->lock); } diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h index 6bb0afbff928..6c4ce457168c 100644 --- a/fs/btrfs/locking.h +++ b/fs/btrfs/locking.h @@ -21,11 +21,11 @@ int btrfs_tree_lock(struct extent_buffer *eb); int btrfs_tree_unlock(struct extent_buffer *eb); -int btrfs_tree_locked(struct extent_buffer *eb); int btrfs_try_tree_lock(struct extent_buffer *eb); int btrfs_try_spin_lock(struct extent_buffer *eb); void btrfs_set_lock_blocking(struct extent_buffer *eb); void btrfs_clear_lock_blocking(struct extent_buffer *eb); +void btrfs_assert_tree_locked(struct extent_buffer *eb); #endif -- cgit v1.2.3 From ed75d8635abde0c43d26152014e386706475120e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Mar 2009 13:25:06 +0000 Subject: powerpc: fix linkstation and storcenter compilation breakage Defining flash partition table in platform code is deprecated, and due to recent changes linkstation and storcenter do not compile any more with their default configurations because of undefined references to physmap_set_partitions(). Instead of fixing them by using the correct kernel configuration macro in preprocessor conditional, remove partition table definitions altogether. Instead add support for partition definition on the command-line and in device tree to the default configurations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala --- arch/powerpc/configs/linkstation_defconfig | 36 +++++++++++++--------- arch/powerpc/configs/storcenter_defconfig | 35 ++++++++++++++-------- arch/powerpc/platforms/embedded6xx/linkstation.c | 38 ------------------------ arch/powerpc/platforms/embedded6xx/storcenter.c | 32 -------------------- 4 files changed, 44 insertions(+), 97 deletions(-) diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index aa5855a156de..15900dcf0bfa 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:29 2009 +# Linux kernel version: 2.6.29-rc6 +# Fri Mar 6 00:07:38 2009 # # CONFIG_PPC64 is not set @@ -71,6 +71,15 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -88,6 +97,7 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -153,11 +163,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -294,7 +299,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y @@ -508,8 +512,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -587,7 +591,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -617,13 +620,19 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -839,6 +848,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1037,8 +1047,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 86512c8790d1..94903465ea12 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:46 2009 +# Linux kernel version: 2.6.29-rc6 +# Fri Mar 6 00:09:08 2009 # # CONFIG_PPC64 is not set @@ -71,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -144,11 +153,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -377,8 +381,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -452,7 +456,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -478,13 +481,19 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -677,6 +686,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -818,8 +828,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1159,6 +1167,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_EXPORTFS=m # # Partition Types diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 2ca7be65c2d2..244f997de791 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -12,7 +12,6 @@ #include #include -#include #include #include @@ -22,39 +21,6 @@ #include "mpc10x.h" -static struct mtd_partition linkstation_physmap_partitions[] = { - { - .name = "mtd_firmimg", - .offset = 0x000000, - .size = 0x300000, - }, - { - .name = "mtd_bootcode", - .offset = 0x300000, - .size = 0x070000, - }, - { - .name = "mtd_status", - .offset = 0x370000, - .size = 0x010000, - }, - { - .name = "mtd_conf", - .offset = 0x380000, - .size = 0x080000, - }, - { - .name = "mtd_allflash", - .offset = 0x000000, - .size = 0x400000, - }, - { - .name = "mtd_data", - .offset = 0x310000, - .size = 0x0f0000, - }, -}; - static __initdata struct of_device_id of_bus_ids[] = { { .type = "soc", }, { .compatible = "simple-bus", }, @@ -99,10 +65,6 @@ static int __init linkstation_add_bridge(struct device_node *dev) static void __init linkstation_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(linkstation_physmap_partitions, - ARRAY_SIZE(linkstation_physmap_partitions)); -#endif /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index 8864e4884980..613070e9ddbe 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -26,32 +25,6 @@ #include "mpc10x.h" -#ifdef CONFIG_MTD_PHYSMAP -static struct mtd_partition storcenter_physmap_partitions[] = { - { - .name = "kernel", - .offset = 0x000000, - .size = 0x170000, - }, - { - .name = "rootfs", - .offset = 0x170000, - .size = 0x590000, - }, - { - .name = "uboot", - .offset = 0x700000, - .size = 0x040000, - }, - { - .name = "config", - .offset = 0x740000, - .size = 0x0c0000, - }, -}; -#endif - - static __initdata struct of_device_id storcenter_of_bus[] = { { .name = "soc", }, {}, @@ -96,11 +69,6 @@ static void __init storcenter_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(storcenter_physmap_partitions, - ARRAY_SIZE(storcenter_physmap_partitions)); -#endif - /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") storcenter_add_bridge(np); -- cgit v1.2.3 From 6b849bcff0004aa5dd216b4d3eb56f51c9df8a72 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 9 Mar 2009 18:18:33 +0000 Subject: ASoC: Convert PXA AC97 driver to probe with the platform device This will break any boards that don't register the AC97 controller device due to using ASoC. Signed-off-by: Mark Brown --- sound/soc/pxa/pxa2xx-ac97.c | 38 ++++++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 812c2b4d3e07..49a2810ca58c 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -106,13 +106,13 @@ static int pxa2xx_ac97_resume(struct snd_soc_dai *dai) static int pxa2xx_ac97_probe(struct platform_device *pdev, struct snd_soc_dai *dai) { - return pxa2xx_ac97_hw_probe(pdev); + return pxa2xx_ac97_hw_probe(to_platform_device(dai->dev)); } static void pxa2xx_ac97_remove(struct platform_device *pdev, struct snd_soc_dai *dai) { - pxa2xx_ac97_hw_remove(pdev); + pxa2xx_ac97_hw_remove(to_platform_device(dai->dev)); } static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream, @@ -229,15 +229,45 @@ struct snd_soc_dai pxa_ac97_dai[] = { EXPORT_SYMBOL_GPL(pxa_ac97_dai); EXPORT_SYMBOL_GPL(soc_ac97_ops); -static int __init pxa_ac97_init(void) +static int __devinit pxa2xx_ac97_dev_probe(struct platform_device *pdev) { + int i; + + for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++) + pxa_ac97_dai[i].dev = &pdev->dev; + + /* Punt most of the init to the SoC probe; we may need the machine + * driver to do interesting things with the clocking to get us up + * and running. + */ return snd_soc_register_dais(pxa_ac97_dai, ARRAY_SIZE(pxa_ac97_dai)); } + +static int __devexit pxa2xx_ac97_dev_remove(struct platform_device *pdev) +{ + snd_soc_unregister_dais(pxa_ac97_dai, ARRAY_SIZE(pxa_ac97_dai)); + + return 0; +} + +static struct platform_driver pxa2xx_ac97_driver = { + .probe = pxa2xx_ac97_dev_probe, + .remove = __devexit_p(pxa2xx_ac97_dev_remove), + .driver = { + .name = "pxa2xx-ac97", + .owner = THIS_MODULE, + }, +}; + +static int __init pxa_ac97_init(void) +{ + return platform_driver_register(&pxa2xx_ac97_driver); +} module_init(pxa_ac97_init); static void __exit pxa_ac97_exit(void) { - snd_soc_unregister_dais(pxa_ac97_dai, ARRAY_SIZE(pxa_ac97_dai)); + platform_driver_unregister(&pxa2xx_ac97_driver); } module_exit(pxa_ac97_exit); -- cgit v1.2.3 From eac84739721857f4d5be3d9127f4644f16a9bea4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 9 Mar 2009 17:47:13 +0000 Subject: ASoC: Fix Samsung S3C2412_IISMOD_SDF_{MSB,LSB} definitions The definitions of S3C2412_IISMOD_SDF_MSB and S3C2412_IISMOD_SDF_LSB are incorrect, being the same S3C2412_IISMOD_SDF_IIS which is the only correct one in this series. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h index a5600b381d49..0fad7571030e 100644 --- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -47,8 +47,8 @@ #define S3C2412_IISMOD_LR_LLOW (0 << 7) #define S3C2412_IISMOD_LR_RLOW (1 << 7) #define S3C2412_IISMOD_SDF_IIS (0 << 5) -#define S3C2412_IISMOD_SDF_MSB (0 << 5) -#define S3C2412_IISMOD_SDF_LSB (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (1 << 5) +#define S3C2412_IISMOD_SDF_LSB (2 << 5) #define S3C2412_IISMOD_SDF_MASK (3 << 5) #define S3C2412_IISMOD_RCLK_256FS (0 << 3) #define S3C2412_IISMOD_RCLK_512FS (1 << 3) -- cgit v1.2.3 From 129f8ae9b1b5be94517da76009ea956e89104ce8 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 9 Mar 2009 15:07:33 -0400 Subject: Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod." This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 1 - drivers/cpufreq/cpufreq.c | 51 +++++++++++-------------------- include/linux/cpufreq.h | 1 - 3 files changed, 18 insertions(+), 35 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index b585e04cbc9e..3178c3acd97e 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -277,7 +277,6 @@ static struct cpufreq_driver p4clockmod_driver = { .name = "p4-clockmod", .owner = THIS_MODULE, .attr = p4clockmod_attr, - .hide_interface = 1, }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index b55cb67435bd..d6daf3c507d3 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -754,11 +754,6 @@ static struct kobj_type ktype_cpufreq = { .release = cpufreq_sysfs_release, }; -static struct kobj_type ktype_empty_cpufreq = { - .sysfs_ops = &sysfs_ops, - .release = cpufreq_sysfs_release, -}; - /** * cpufreq_add_dev - add a CPU device @@ -892,36 +887,26 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) memcpy(&new_policy, policy, sizeof(struct cpufreq_policy)); /* prepare interface data */ - if (!cpufreq_driver->hide_interface) { - ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, - &sys_dev->kobj, "cpufreq"); + ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, + "cpufreq"); + if (ret) + goto err_out_driver_exit; + + /* set up files for this cpu device */ + drv_attr = cpufreq_driver->attr; + while ((drv_attr) && (*drv_attr)) { + ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); if (ret) goto err_out_driver_exit; - - /* set up files for this cpu device */ - drv_attr = cpufreq_driver->attr; - while ((drv_attr) && (*drv_attr)) { - ret = sysfs_create_file(&policy->kobj, - &((*drv_attr)->attr)); - if (ret) - goto err_out_driver_exit; - drv_attr++; - } - if (cpufreq_driver->get) { - ret = sysfs_create_file(&policy->kobj, - &cpuinfo_cur_freq.attr); - if (ret) - goto err_out_driver_exit; - } - if (cpufreq_driver->target) { - ret = sysfs_create_file(&policy->kobj, - &scaling_cur_freq.attr); - if (ret) - goto err_out_driver_exit; - } - } else { - ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq, - &sys_dev->kobj, "cpufreq"); + drv_attr++; + } + if (cpufreq_driver->get) { + ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); + if (ret) + goto err_out_driver_exit; + } + if (cpufreq_driver->target) { + ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) goto err_out_driver_exit; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 384b38d3e8e2..161042746afc 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -234,7 +234,6 @@ struct cpufreq_driver { int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg); int (*resume) (struct cpufreq_policy *policy); struct freq_attr **attr; - bool hide_interface; }; /* flags */ -- cgit v1.2.3 From 753b7aea8e4611433c13ac157f944d8b4bf42482 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 9 Mar 2009 15:14:37 -0400 Subject: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Signed-off-by: Matthew Garrett Signed-off-by: Dave Jones --- Documentation/feature-removal-schedule.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 5ddbe350487a..20d3b94703a4 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -335,3 +335,12 @@ Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" Secmark, it is time to deprecate the older mechanism and start the process of removing the old code. Who: Paul Moore +--------------------------- + +What: sysfs ui for changing p4-clockmod parameters +When: September 2009 +Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and + e088e4c9cdb618675874becb91b2fd581ee707e6. + Removal is subject to fixing any remaining bugs in ACPI which may + cause the thermal throttling not to happen at the right time. +Who: Dave Jones , Matthew Garrett -- cgit v1.2.3 From 2d5516cbb9daf7d0e342a2e3b0fc6f8c39a81205 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 2 Mar 2009 22:58:45 +0100 Subject: copy_process: fix CLONE_PARENT && parent_exec_id interaction CLONE_PARENT can fool the ->self_exec_id/parent_exec_id logic. If we re-use the old parent, we must also re-use ->parent_exec_id to make sure exit_notify() sees the right ->xxx_exec_id's when the CLONE_PARENT'ed task exits. Also, move down the "p->parent_exec_id = p->self_exec_id" thing, to place two different cases together. Signed-off-by: Oleg Nesterov Cc: Roland McGrath Cc: Andrew Morton Cc: David Howells Cc: Serge E. Hallyn Signed-off-by: Linus Torvalds --- kernel/fork.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index a66fbde20715..4854c2c4a82e 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1179,10 +1179,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, #endif clear_all_latency_tracing(p); - /* Our parent execution domain becomes current domain - These must match for thread signalling to apply */ - p->parent_exec_id = p->self_exec_id; - /* ok, now we should be set up.. */ p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL); p->pdeath_signal = 0; @@ -1220,10 +1216,13 @@ static struct task_struct *copy_process(unsigned long clone_flags, set_task_cpu(p, smp_processor_id()); /* CLONE_PARENT re-uses the old parent */ - if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) + if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) { p->real_parent = current->real_parent; - else + p->parent_exec_id = current->parent_exec_id; + } else { p->real_parent = current; + p->parent_exec_id = current->self_exec_id; + } spin_lock(¤t->sighand->siglock); -- cgit v1.2.3 From df7f54c012b92ec93d56b68547351dcdf8a163d3 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 9 Mar 2009 14:35:58 -0400 Subject: SELinux: inode_doinit_with_dentry drop no dentry printk Drop the printk message when an inode is found without an associated dentry. This should only happen when userspace can't be accessing those inodes and those labels will get set correctly on the next d_instantiate. Thus there is no reason to send this message. Signed-off-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index cd3307a26d11..7c52ba243c64 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1263,9 +1263,15 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent dentry = d_find_alias(inode); } if (!dentry) { - printk(KERN_WARNING "SELinux: %s: no dentry for dev=%s " - "ino=%ld\n", __func__, inode->i_sb->s_id, - inode->i_ino); + /* + * this is can be hit on boot when a file is accessed + * before the policy is loaded. When we load policy we + * may find inodes that have no dentry on the + * sbsec->isec_head list. No reason to complain as these + * will get fixed up the next time we go through + * inode_doinit with a dentry, before these inodes could + * be used again by userspace. + */ goto out_unlock; } -- cgit v1.2.3 From 2ef7f0dab6b3d171b6aff00a47077385ae3155b5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 6 Mar 2009 09:47:02 +0000 Subject: sh: hibernation support Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support to the SuperH architecture. To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state" To resume, pass "resume=/dev/sda2" on the kernel command line. The patch "pm: rework includes, remove arch ifdefs V2" is needed to allow the generic swsusp code to build properly. Hibernation is not enabled with this patch though, a patch setting ARCH_HIBERNATION_POSSIBLE will be submitted later. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/sections.h | 1 + arch/sh/include/asm/suspend.h | 13 ++++ arch/sh/kernel/Makefile_32 | 1 + arch/sh/kernel/asm-offsets.c | 8 +++ arch/sh/kernel/cpu/sh3/Makefile | 2 + arch/sh/kernel/cpu/sh3/entry.S | 22 ++++-- arch/sh/kernel/cpu/sh3/swsusp.S | 147 ++++++++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4/Makefile | 1 + arch/sh/kernel/swsusp.c | 38 +++++++++++ 9 files changed, 228 insertions(+), 5 deletions(-) create mode 100644 arch/sh/include/asm/suspend.h create mode 100644 arch/sh/kernel/cpu/sh3/swsusp.S create mode 100644 arch/sh/kernel/swsusp.c diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 8f8f4ad400df..01a4076a3719 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -3,6 +3,7 @@ #include +extern void __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; extern char _ebss[]; diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h new file mode 100644 index 000000000000..5d6d8aba5682 --- /dev/null +++ b/arch/sh/include/asm/suspend.h @@ -0,0 +1,13 @@ +#ifndef _ASM_SH_SUSPEND_H +#define _ASM_SH_SUSPEND_H + +static inline int arch_prepare_suspend(void) { return 0; } + +#include + +struct swsusp_arch_regs { + struct pt_regs user_regs; + unsigned long bank1_regs[8]; +}; + +#endif /* _ASM_SH_SUSPEND_H */ diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 2e1b86e16ab5..82a3a150c00d 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -30,5 +30,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o +obj-$(CONFIG_HIBERNATION) += swsusp.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c index 57cf0e0680f3..99aceb28ee24 100644 --- a/arch/sh/kernel/asm-offsets.c +++ b/arch/sh/kernel/asm-offsets.c @@ -12,8 +12,10 @@ #include #include #include +#include #include +#include int main(void) { @@ -25,5 +27,11 @@ int main(void) DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block)); +#ifdef CONFIG_HIBERNATION + DEFINE(PBE_ADDRESS, offsetof(struct pbe, address)); + DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address)); + DEFINE(PBE_NEXT, offsetof(struct pbe, next)); + DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs)); +#endif return 0; } diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index e07c69e16d9b..ecab274141a8 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -4,6 +4,8 @@ obj-y := ex.o probe.o entry.o setup-sh3.o +obj-$(CONFIG_HIBERNATION) += swsusp.o + # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index c4829d6dee51..fba6ac20bb17 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -216,7 +216,7 @@ ENTRY(sh_bios_handler) ! r9 trashed ! BL=0 on entry, on exit BL=1 (depending on r8). -restore_regs: +ENTRY(restore_regs) mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 @@ -362,8 +362,10 @@ general_exception: nop ! Save registers / Switch to bank 0 + mov.l k4, k2 ! keep vector in k2 + mov.l 1f, k4 ! SR bits to clear in k4 bsr save_regs ! needs original pr value in k3 - mov k4, k2 ! keep vector in k2 + nop bra handle_exception_special nop @@ -471,6 +473,7 @@ handle_exception: ! Save registers / Switch to bank 0 mov.l 5f, k2 ! vector register address + mov.l 1f, k4 ! SR bits to clear in k4 bsr save_regs ! needs original pr value in k3 mov.l @k2, k2 ! read out vector and keep in k2 @@ -495,10 +498,10 @@ handle_exception_special: ! k0 contains original stack pointer* ! k1 trashed ! k3 passes original pr* -! k4 trashed +! k4 passes SR bitmask ! BL=1 on entry, on exit BL=0. -save_regs: +ENTRY(save_regs) mov #-1, r1 mov.l k1, @-r15 ! set TRA (default: -1) sts.l macl, @-r15 @@ -518,8 +521,16 @@ save_regs: mov.l r8, @-r15 mov.l 0f, k3 ! SR bits to set in k3 - mov.l 1f, k4 ! SR bits to clear in k4 + ! fall-through + +! save_low_regs() +! - modify SR for bank switch +! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack +! k3 passes bits to set in SR +! k4 passes bits to clear in SR + +ENTRY(save_low_regs) stc sr, r8 or k3, r8 and k4, r8 @@ -565,6 +576,7 @@ ENTRY(handle_interrupt) PREF(k0) ! Save registers / Switch to bank 0 + mov.l 1f, k4 ! SR bits to clear in k4 bsr save_regs ! needs original pr value in k3 mov #-1, k2 ! default vector kept in k2 diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S new file mode 100644 index 000000000000..01145426a2b8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/swsusp.S @@ -0,0 +1,147 @@ +/* + * arch/sh/kernel/cpu/sh3/swsusp.S + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +! swsusp_arch_resume() +! - copy restore_pblist pages +! - restore registers from swsusp_arch_regs_cpu0 + +ENTRY(swsusp_arch_resume) + mov.l 1f, r15 + mov.l 2f, r4 + mov.l @r4, r4 + +swsusp_copy_loop: + mov r4, r0 + cmp/eq #0, r0 + bt swsusp_restore_regs + + mov.l @(PBE_ADDRESS, r4), r2 + mov.l @(PBE_ORIG_ADDRESS, r4), r5 + + mov #(PAGE_SIZE >> 10), r3 + shll8 r3 + shlr2 r3 /* PAGE_SIZE / 16 */ +swsusp_copy_page: + dt r3 + mov.l @r2+,r1 /* 16n+0 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+4 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+8 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+12 */ + mov.l r1,@r5 + bf/s swsusp_copy_page + add #4,r5 + + bra swsusp_copy_loop + mov.l @(PBE_NEXT, r4), r4 + +swsusp_restore_regs: + ! BL=0: R7->R0 is bank0 + mov.l 3f, r8 + mov.l 4f, r5 + jsr @r5 + nop + + ! BL=1: R7->R0 is bank1 + lds k2, pr + ldc k3, ssr + + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + + rte + nop + ! BL=0: R7->R0 is bank0 + + .align 2 +1: .long swsusp_arch_regs_cpu0 +2: .long restore_pblist +3: .long 0x20000000 ! RB=1 +4: .long restore_regs + +! swsusp_arch_suspend() +! - prepare pc for resume, return from function without swsusp_save on resume +! - save registers in swsusp_arch_regs_cpu0 +! - call swsusp_save write suspend image + +ENTRY(swsusp_arch_suspend) + sts pr, r0 ! save pr in r0 + mov r15, r2 ! save sp in r2 + mov r8, r5 ! save r8 in r5 + stc sr, r1 + ldc r1, ssr ! save sr in ssr + mov.l 1f, r1 + ldc r1, spc ! setup pc value for resuming + mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack + mov.l 6f, r3 + add r3, r15 ! save from top of structure + + ! BL=0: R7->R0 is bank0 + mov.l 2f, r3 ! get new SR value for bank1 + mov #0, r4 + mov.l 7f, r1 + jsr @r1 ! switch to bank1 and save bank1 r7->r0 + not r4, r4 + + ! BL=1: R7->R0 is bank1 + stc r2_bank, k0 ! fetch old sp from r2_bank0 + mov.l 3f, k4 ! SR bits to clear in k4 + mov.l 8f, k1 + jsr @k1 ! switch to bank0 and save all regs + stc r0_bank, k3 ! fetch old pr from r0_bank0 + + ! BL=0: R7->R0 is bank0 + mov r2, r15 ! restore old sp + mov r5, r8 ! restore old r8 + stc ssr, r1 + ldc r1, sr ! restore old sr + lds r0, pr ! restore old pr + mov.l 4f, r0 + jmp @r0 + nop + +swsusp_call_save: + mov r2, r15 ! restore old sp + mov r5, r8 ! restore old r8 + lds r0, pr ! restore old pr + rts + mov #0, r0 + + .align 2 +1: .long swsusp_call_save +2: .long 0x20000000 ! RB=1 +3: .long 0xdfffffff ! RB=0 +4: .long swsusp_save +5: .long swsusp_arch_regs_cpu0 +6: .long SWSUSP_ARCH_REGS_SIZE +7: .long save_low_regs +8: .long save_regs diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index d608557c7a3f..203b18347b83 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -5,6 +5,7 @@ obj-y := probe.o common.o common-y += $(addprefix ../sh3/, entry.o ex.o) +obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o) obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c new file mode 100644 index 000000000000..12b64a0f2f01 --- /dev/null +++ b/arch/sh/kernel/swsusp.c @@ -0,0 +1,38 @@ +/* + * swsusp.c - SuperH hibernation support + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct swsusp_arch_regs swsusp_arch_regs_cpu0; + +int pfn_is_nosave(unsigned long pfn) +{ + unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT; + unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT; + + return (pfn >= begin_pfn) && (pfn < end_pfn); +} + +void save_processor_state(void) +{ + init_fpu(current); +} + +void restore_processor_state(void) +{ + local_flush_tlb_all(); +} -- cgit v1.2.3 From ba087e6f69381de6c91d6634aa0f603a2fdc96a9 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Mar 2009 02:51:14 +0000 Subject: sh: Add media/soc_camera.h to board setup of Renesas AP325RXA Other compilation errors were revised by commit of "sh: ap325rxa: Revert ov772x support" (08c2f5b4d76f83213e379b12df504269d21c9e7c) but other compilation errors are given. We revert this commit and need to add new header(media/soc_camera.h). This change revises new compilation error. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 72da416f6162..15b6d450fbf0 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include - Each mapX/ directory contains two read-only files - that show start address and size of the memory: + Each mapX/ directory contains four read-only files + that show attributes of the memory: + + + name: A string identifier for this mapping. This + is optional, the string can be empty. Drivers can set this to make it + easier for userspace to find the correct mapping. + + addr: The address of memory that can be mapped. @@ -366,10 +380,17 @@ offset = N * getpagesize(); /sys/class/uio/uioX/portio/. - Each portX/ directory contains three read-only - files that show start, size, and type of the port region: + Each portX/ directory contains four read-only + files that show name, start, size, and type of the port region: + + + name: A string identifier for this port region. + The string is optional and can be empty. Drivers can set it to make it + easier for userspace to find a certain port region. + + start: The first port of this region. diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 4ca85a113aa2..68a496557788 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -61,6 +61,14 @@ struct uio_map { }; #define to_map(map) container_of(map, struct uio_map, kobj) +static ssize_t map_name_show(struct uio_mem *mem, char *buf) +{ + if (unlikely(!mem->name)) + mem->name = ""; + + return sprintf(buf, "%s\n", mem->name); +} + static ssize_t map_addr_show(struct uio_mem *mem, char *buf) { return sprintf(buf, "0x%lx\n", mem->addr); @@ -82,6 +90,8 @@ struct map_sysfs_entry { ssize_t (*store)(struct uio_mem *, const char *, size_t); }; +static struct map_sysfs_entry name_attribute = + __ATTR(name, S_IRUGO, map_name_show, NULL); static struct map_sysfs_entry addr_attribute = __ATTR(addr, S_IRUGO, map_addr_show, NULL); static struct map_sysfs_entry size_attribute = @@ -90,6 +100,7 @@ static struct map_sysfs_entry offset_attribute = __ATTR(offset, S_IRUGO, map_offset_show, NULL); static struct attribute *attrs[] = { + &name_attribute.attr, &addr_attribute.attr, &size_attribute.attr, &offset_attribute.attr, @@ -133,6 +144,14 @@ struct uio_portio { }; #define to_portio(portio) container_of(portio, struct uio_portio, kobj) +static ssize_t portio_name_show(struct uio_port *port, char *buf) +{ + if (unlikely(!port->name)) + port->name = ""; + + return sprintf(buf, "%s\n", port->name); +} + static ssize_t portio_start_show(struct uio_port *port, char *buf) { return sprintf(buf, "0x%lx\n", port->start); @@ -159,6 +178,8 @@ struct portio_sysfs_entry { ssize_t (*store)(struct uio_port *, const char *, size_t); }; +static struct portio_sysfs_entry portio_name_attribute = + __ATTR(name, S_IRUGO, portio_name_show, NULL); static struct portio_sysfs_entry portio_start_attribute = __ATTR(start, S_IRUGO, portio_start_show, NULL); static struct portio_sysfs_entry portio_size_attribute = @@ -167,6 +188,7 @@ static struct portio_sysfs_entry portio_porttype_attribute = __ATTR(porttype, S_IRUGO, portio_porttype_show, NULL); static struct attribute *portio_attrs[] = { + &portio_name_attribute.attr, &portio_start_attribute.attr, &portio_size_attribute.attr, &portio_porttype_attribute.attr, diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index a0bb6bd2e5c1..5dcc9ff72f69 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -22,6 +22,7 @@ struct uio_map; /** * struct uio_mem - description of a UIO memory region + * @name: name of the memory region for identification * @addr: address of the device's memory * @size: size of IO * @memtype: type of memory addr points to @@ -29,6 +30,7 @@ struct uio_map; * @map: for use by the UIO core only. */ struct uio_mem { + const char *name; unsigned long addr; unsigned long size; int memtype; @@ -42,12 +44,14 @@ struct uio_portio; /** * struct uio_port - description of a UIO port region + * @name: name of the port region for identification * @start: start of port region * @size: size of port region * @porttype: type of port (see UIO_PORT_* below) * @portio: for use by the UIO core only. */ struct uio_port { + const char *name; unsigned long start; unsigned long size; int porttype; -- cgit v1.2.3 From 1bafeb378e915f39b1bf44ee0871823d6f402ea5 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Tue, 27 Jan 2009 13:00:04 -0800 Subject: uio: add the uio_aec driver UIO driver for the Adrienne Electronics Corporation PCI time code device. This device differs from other UIO devices since it uses I/O ports instead of memory mapped I/O. In order to make it possible for UIO to work with this device a utility, uioport, can be used to read and write the ports. uioport is designed to be a setuid program and checks the permissions of the /dev/uio* node and if the user has write permissions it will use iopl and out*/in* to access the device. [1] git clone git://ifup.org/philips/uioport.git Signed-off-by: Brandon Philips Signed-off-by: Hans J. Koch Signed-off-by: Greg Kroah-Hartman --- drivers/uio/Kconfig | 18 ++++++ drivers/uio/Makefile | 1 + drivers/uio/uio_aec.c | 175 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 194 insertions(+) create mode 100644 drivers/uio/uio_aec.c diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 04b954cfce76..7f86534de269 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -58,6 +58,24 @@ config UIO_SMX If you compile this as a module, it will be called uio_smx. +config UIO_AEC + tristate "AEC video timestamp device" + depends on PCI + default n + help + + UIO driver for the Adrienne Electronics Corporation PCI time + code device. + + This device differs from other UIO devices since it uses I/O + ports instead of memory mapped I/O. In order to make it + possible for UIO to work with this device a utility, uioport, + can be used to read and write the ports: + + git clone git://ifup.org/philips/uioport.git + + If you compile this as a module, it will be called uio_aec. + config UIO_SERCOS3 tristate "Automata Sercos III PCI card driver" default n diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile index e69558149859..5c2586d75797 100644 --- a/drivers/uio/Makefile +++ b/drivers/uio/Makefile @@ -3,4 +3,5 @@ obj-$(CONFIG_UIO_CIF) += uio_cif.o obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o obj-$(CONFIG_UIO_SMX) += uio_smx.o +obj-$(CONFIG_UIO_AEC) += uio_aec.o obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o diff --git a/drivers/uio/uio_aec.c b/drivers/uio/uio_aec.c new file mode 100644 index 000000000000..b7830e9a3baa --- /dev/null +++ b/drivers/uio/uio_aec.c @@ -0,0 +1,175 @@ +/* + * uio_aec.c -- simple driver for Adrienne Electronics Corp time code PCI device + * + * Copyright (C) 2008 Brandon Philips + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PCI_VENDOR_ID_AEC 0xaecb +#define PCI_DEVICE_ID_AEC_VITCLTC 0x6250 + +#define INT_ENABLE_ADDR 0xFC +#define INT_ENABLE 0x10 +#define INT_DISABLE 0x0 + +#define INT_MASK_ADDR 0x2E +#define INT_MASK_ALL 0x3F + +#define INTA_DRVR_ADDR 0xFE +#define INTA_ENABLED_FLAG 0x08 +#define INTA_FLAG 0x01 + +#define MAILBOX 0x0F + +static struct pci_device_id ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AEC, PCI_DEVICE_ID_AEC_VITCLTC), }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, ids); + +static irqreturn_t aectc_irq(int irq, struct uio_info *dev_info) +{ + void __iomem *int_flag = dev_info->priv + INTA_DRVR_ADDR; + unsigned char status = ioread8(int_flag); + + + if ((status & INTA_ENABLED_FLAG) && (status & INTA_FLAG)) { + /* application writes 0x00 to 0x2F to get next interrupt */ + status = ioread8(dev_info->priv + MAILBOX); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static void print_board_data(struct pci_dev *pdev, struct uio_info *i) +{ + dev_info(&pdev->dev, "PCI-TC board vendor: %x%x number: %x%x" + " revision: %c%c\n", + ioread8(i->priv + 0x01), + ioread8(i->priv + 0x00), + ioread8(i->priv + 0x03), + ioread8(i->priv + 0x02), + ioread8(i->priv + 0x06), + ioread8(i->priv + 0x07)); +} + +static int __devinit probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct uio_info *info; + int ret; + + info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + if (pci_enable_device(pdev)) + goto out_free; + + if (pci_request_regions(pdev, "aectc")) + goto out_disable; + + info->name = "aectc"; + info->port[0].start = pci_resource_start(pdev, 0); + if (!info->port[0].start) + goto out_release; + info->priv = pci_iomap(pdev, 0, 0); + if (!info->priv) + goto out_release; + info->port[0].size = pci_resource_len(pdev, 0); + info->port[0].porttype = UIO_PORT_GPIO; + + info->version = "0.0.1"; + info->irq = pdev->irq; + info->irq_flags = IRQF_SHARED; + info->handler = aectc_irq; + + print_board_data(pdev, info); + ret = uio_register_device(&pdev->dev, info); + if (ret) + goto out_unmap; + + iowrite32(INT_ENABLE, info->priv + INT_ENABLE_ADDR); + iowrite8(INT_MASK_ALL, info->priv + INT_MASK_ADDR); + if (!(ioread8(info->priv + INTA_DRVR_ADDR) + & INTA_ENABLED_FLAG)) + dev_err(&pdev->dev, "aectc: interrupts not enabled\n"); + + pci_set_drvdata(pdev, info); + + return 0; + +out_unmap: + pci_iounmap(pdev, info->priv); +out_release: + pci_release_regions(pdev); +out_disable: + pci_disable_device(pdev); +out_free: + kfree(info); + return -ENODEV; +} + +static void remove(struct pci_dev *pdev) +{ + struct uio_info *info = pci_get_drvdata(pdev); + + /* disable interrupts */ + iowrite8(INT_DISABLE, info->priv + INT_MASK_ADDR); + iowrite32(INT_DISABLE, info->priv + INT_ENABLE_ADDR); + /* read mailbox to ensure board drops irq */ + ioread8(info->priv + MAILBOX); + + uio_unregister_device(info); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + iounmap(info->priv); + + kfree(info); +} + +static struct pci_driver pci_driver = { + .name = "aectc", + .id_table = ids, + .probe = probe, + .remove = remove, +}; + +static int __init aectc_init(void) +{ + return pci_register_driver(&pci_driver); +} + +static void __exit aectc_exit(void) +{ + pci_unregister_driver(&pci_driver); +} + +MODULE_LICENSE("GPL"); + +module_init(aectc_init); +module_exit(aectc_exit); -- cgit v1.2.3 From 6da2d377bba06c29d0bc41c8dee014164dec82a7 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 24 Feb 2009 17:22:59 +0000 Subject: UIO: Take offset into account when determining number of pages that can be mapped If a UIO memory region does not start on a page boundary but straddles one, the number of actual pages that overlap the memory region may be calculated incorrectly because the offset isn't taken into account. If userspace sets the mmap length to offset+size, it may fail with -EINVAL if UIO thinks it's trying to allocate too many pages. Signed-off-by: Ian Abbott Cc: Hans J. Koch Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 68a496557788..03efb065455f 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -708,7 +708,8 @@ static int uio_mmap(struct file *filep, struct vm_area_struct *vma) return -EINVAL; requested_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - actual_pages = (idev->info->mem[mi].size + PAGE_SIZE -1) >> PAGE_SHIFT; + actual_pages = ((idev->info->mem[mi].addr & ~PAGE_MASK) + + idev->info->mem[mi].size + PAGE_SIZE -1) >> PAGE_SHIFT; if (requested_pages > actual_pages) return -EINVAL; -- cgit v1.2.3 From 7a192ec334cab9fafe3a8665a65af398b0e24730 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 6 Feb 2009 23:40:12 +0800 Subject: platform driver: fix incorrect use of 'platform_bus_type' with 'struct device_driver' This patch fixes the bug reported in http://bugzilla.kernel.org/show_bug.cgi?id=11681. "Lots of device drivers register a 'struct device_driver' with the '.bus' member set to '&platform_bus_type'. This is wrong, since the platform_bus functions expect the 'struct device_driver' to be wrapped up in a 'struct platform_driver' which provides some additional callbacks (like suspend_late, resume_early). The effect may be that platform_suspend_late() uses bogus data outside the device_driver struct as a pointer pointer to the device driver's suspend_late() function or other hard to reproduce failures."(Lothar Wassmann) Signed-off-by: Ming Lei Acked-by: Henrique de Moraes Holschuh Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/mips/basler/excite/excite_iodev.c | 27 ++++++++++++------------ drivers/char/tpm/tpm_atmel.c | 28 +++++++++++++++++-------- drivers/char/tpm/tpm_tis.c | 28 +++++++++++++++++-------- drivers/ide/au1xxx-ide.c | 36 ++++++++++++++++---------------- drivers/mtd/maps/pxa2xx-flash.c | 37 +++++++++++++++++---------------- drivers/mtd/nand/excite_nandflash.c | 25 +++++++++++----------- drivers/mtd/onenand/generic.c | 26 +++++++++++------------ drivers/net/mipsnet.c | 26 ++++++++++++----------- drivers/pcmcia/au1000_generic.c | 37 +++++++++++++++++++++------------ drivers/pcmcia/i82365.c | 28 ++++++++++++++++++------- drivers/pcmcia/m32r_cfc.c | 30 +++++++++++++++++++-------- drivers/pcmcia/m32r_pcc.c | 30 +++++++++++++++++++-------- drivers/pcmcia/sa1100_generic.c | 38 +++++++++++++++++++++++++--------- drivers/pcmcia/tcic.c | 30 +++++++++++++++++++-------- drivers/pcmcia/vrc4171_card.c | 34 +++++++++++++++++++++--------- drivers/scsi/a4000t.c | 26 ++++++++++++----------- drivers/scsi/bvme6000_scsi.c | 26 ++++++++++++----------- drivers/scsi/mvme16x_scsi.c | 26 ++++++++++++----------- drivers/video/au1100fb.c | 31 +++++++++++++-------------- drivers/video/au1200fb.c | 25 ++++++++++++---------- drivers/watchdog/rm9k_wdt.c | 27 +++++++++++------------- 21 files changed, 371 insertions(+), 250 deletions(-) diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c index a1e3526b4a94..dfbfd7e2ac08 100644 --- a/arch/mips/basler/excite/excite_iodev.c +++ b/arch/mips/basler/excite/excite_iodev.c @@ -33,8 +33,8 @@ static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); -static int __init iodev_probe(struct device *); -static int __exit iodev_remove(struct device *); +static int __init iodev_probe(struct platform_device *); +static int __exit iodev_remove(struct platform_device *); static int iodev_open(struct inode *, struct file *); static int iodev_release(struct inode *, struct file *); static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); @@ -65,13 +65,13 @@ static struct miscdevice miscdev = .fops = &fops }; -static struct device_driver iodev_driver = -{ - .name = (char *) iodev_name, - .bus = &platform_bus_type, - .owner = THIS_MODULE, +static struct platform_driver iodev_driver = { + .driver = { + .name = iodev_name, + .owner = THIS_MODULE, + }, .probe = iodev_probe, - .remove = __exit_p(iodev_remove) + .remove = __devexit_p(iodev_remove), }; @@ -89,11 +89,10 @@ iodev_get_resource(struct platform_device *pdv, const char *name, /* No hotplugging on the platform bus - use __init */ -static int __init iodev_probe(struct device *dev) +static int __init iodev_probe(struct platform_device *dev) { - struct platform_device * const pdv = to_platform_device(dev); const struct resource * const ri = - iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); + iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); if (unlikely(!ri)) return -ENXIO; @@ -104,7 +103,7 @@ static int __init iodev_probe(struct device *dev) -static int __exit iodev_remove(struct device *dev) +static int __exit iodev_remove(struct platform_device *dev) { return misc_deregister(&miscdev); } @@ -160,14 +159,14 @@ static irqreturn_t iodev_irqhdl(int irq, void *ctxt) static int __init iodev_init_module(void) { - return driver_register(&iodev_driver); + return platform_driver_register(&iodev_driver); } static void __exit iodev_cleanup_module(void) { - driver_unregister(&iodev_driver); + platform_driver_unregister(&iodev_driver); } module_init(iodev_init_module); diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index d0e7926eb486..c64a1bc65349 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -168,12 +168,22 @@ static void atml_plat_remove(void) } } -static struct device_driver atml_drv = { - .name = "tpm_atmel", - .bus = &platform_bus_type, - .owner = THIS_MODULE, - .suspend = tpm_pm_suspend, - .resume = tpm_pm_resume, +static int tpm_atml_suspend(struct platform_device *dev, pm_message_t msg) +{ + return tpm_pm_suspend(&dev->dev, msg); +} + +static int tpm_atml_resume(struct platform_device *dev) +{ + return tpm_pm_resume(&dev->dev); +} +static struct platform_driver atml_drv = { + .driver = { + .name = "tpm_atmel", + .owner = THIS_MODULE, + }, + .suspend = tpm_atml_suspend, + .resume = tpm_atml_resume, }; static int __init init_atmel(void) @@ -184,7 +194,7 @@ static int __init init_atmel(void) unsigned long base; struct tpm_chip *chip; - rc = driver_register(&atml_drv); + rc = platform_driver_register(&atml_drv); if (rc) return rc; @@ -223,13 +233,13 @@ err_rel_reg: atmel_release_region(base, region_size); err_unreg_drv: - driver_unregister(&atml_drv); + platform_driver_unregister(&atml_drv); return rc; } static void __exit cleanup_atmel(void) { - driver_unregister(&atml_drv); + platform_driver_unregister(&atml_drv); atml_plat_remove(); } diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 717af7ad1bdf..aec1931608aa 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -654,12 +654,22 @@ module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id, sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444); MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe"); -static struct device_driver tis_drv = { - .name = "tpm_tis", - .bus = &platform_bus_type, - .owner = THIS_MODULE, - .suspend = tpm_pm_suspend, - .resume = tpm_pm_resume, +static int tpm_tis_suspend(struct platform_device *dev, pm_message_t msg) +{ + return tpm_pm_suspend(&dev->dev, msg); +} + +static int tpm_tis_resume(struct platform_device *dev) +{ + return tpm_pm_resume(&dev->dev); +} +static struct platform_driver tis_drv = { + .driver = { + .name = "tpm_tis", + .owner = THIS_MODULE, + }, + .suspend = tpm_tis_suspend, + .resume = tpm_tis_resume, }; static struct platform_device *pdev; @@ -672,14 +682,14 @@ static int __init init_tis(void) int rc; if (force) { - rc = driver_register(&tis_drv); + rc = platform_driver_register(&tis_drv); if (rc < 0) return rc; if (IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0))) return PTR_ERR(pdev); if((rc=tpm_tis_init(&pdev->dev, TIS_MEM_BASE, TIS_MEM_LEN, 0)) != 0) { platform_device_unregister(pdev); - driver_unregister(&tis_drv); + platform_driver_unregister(&tis_drv); } return rc; } @@ -711,7 +721,7 @@ static void __exit cleanup_tis(void) if (force) { platform_device_unregister(pdev); - driver_unregister(&tis_drv); + platform_driver_unregister(&tis_drv); } else pnp_unregister_driver(&tis_pnp_driver); } diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 79a2dfed8eb7..154ec2cf734f 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -536,9 +536,8 @@ static const struct ide_port_info au1xxx_port_info = { #endif }; -static int au_ide_probe(struct device *dev) +static int au_ide_probe(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); _auide_hwif *ahwif = &auide_hwif; struct resource *res; struct ide_host *host; @@ -552,23 +551,23 @@ static int au_ide_probe(struct device *dev) #endif memset(&auide_hwif, 0, sizeof(_auide_hwif)); - ahwif->irq = platform_get_irq(pdev, 0); + ahwif->irq = platform_get_irq(dev, 0); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (res == NULL) { - pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id); + pr_debug("%s %d: no base address\n", DRV_NAME, dev->id); ret = -ENODEV; goto out; } if (ahwif->irq < 0) { - pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id); + pr_debug("%s %d: no IRQ\n", DRV_NAME, dev->id); ret = -ENODEV; goto out; } if (!request_mem_region(res->start, res->end - res->start + 1, - pdev->name)) { + dev->name)) { pr_debug("%s: request_mem_region failed\n", DRV_NAME); ret = -EBUSY; goto out; @@ -583,7 +582,7 @@ static int au_ide_probe(struct device *dev) memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); hw.irq = ahwif->irq; - hw.dev = dev; + hw.dev = &dev->dev; hw.chipset = ide_au1xxx; ret = ide_host_add(&au1xxx_port_info, hws, &host); @@ -592,7 +591,7 @@ static int au_ide_probe(struct device *dev) auide_hwif.hwif = host->ports[0]; - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); @@ -600,38 +599,39 @@ static int au_ide_probe(struct device *dev) return ret; } -static int au_ide_remove(struct device *dev) +static int au_ide_remove(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *res; - struct ide_host *host = dev_get_drvdata(dev); + struct ide_host *host = platform_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; ide_host_remove(host); iounmap((void *)ahwif->regbase); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); release_mem_region(res->start, res->end - res->start + 1); return 0; } -static struct device_driver au1200_ide_driver = { - .name = "au1200-ide", - .bus = &platform_bus_type, +static struct platform_driver au1200_ide_driver = { + .driver = { + .name = "au1200-ide", + .owner = THIS_MODULE, + }, .probe = au_ide_probe, .remove = au_ide_remove, }; static int __init au_ide_init(void) { - return driver_register(&au1200_ide_driver); + return platform_driver_register(&au1200_ide_driver); } static void __exit au_ide_exit(void) { - driver_unregister(&au1200_ide_driver); + platform_driver_unregister(&au1200_ide_driver); } MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 771139c5bf87..e9026cb1c5b2 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -41,9 +41,8 @@ struct pxa2xx_flash_info { static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -static int __init pxa2xx_flash_probe(struct device *dev) +static int __init pxa2xx_flash_probe(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); struct flash_platform_data *flash = pdev->dev.platform_data; struct pxa2xx_flash_info *info; struct mtd_partition *parts; @@ -114,15 +113,15 @@ static int __init pxa2xx_flash_probe(struct device *dev) add_mtd_device(info->mtd); } - dev_set_drvdata(dev, info); + platform_set_drvdata(pdev, info); return 0; } -static int __exit pxa2xx_flash_remove(struct device *dev) +static int __exit pxa2xx_flash_remove(struct platform_device *dev) { - struct pxa2xx_flash_info *info = dev_get_drvdata(dev); + struct pxa2xx_flash_info *info = platform_get_drvdata(dev); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); #ifdef CONFIG_MTD_PARTITIONS if (info->nr_parts) @@ -141,9 +140,9 @@ static int __exit pxa2xx_flash_remove(struct device *dev) } #ifdef CONFIG_PM -static int pxa2xx_flash_suspend(struct device *dev, pm_message_t state) +static int pxa2xx_flash_suspend(struct platform_device *dev, pm_message_t state) { - struct pxa2xx_flash_info *info = dev_get_drvdata(dev); + struct pxa2xx_flash_info *info = platform_get_drvdata(dev); int ret = 0; if (info->mtd && info->mtd->suspend) @@ -151,17 +150,17 @@ static int pxa2xx_flash_suspend(struct device *dev, pm_message_t state) return ret; } -static int pxa2xx_flash_resume(struct device *dev) +static int pxa2xx_flash_resume(struct platform_device *dev) { - struct pxa2xx_flash_info *info = dev_get_drvdata(dev); + struct pxa2xx_flash_info *info = platform_get_drvdata(dev); if (info->mtd && info->mtd->resume) info->mtd->resume(info->mtd); return 0; } -static void pxa2xx_flash_shutdown(struct device *dev) +static void pxa2xx_flash_shutdown(struct platform_device *dev) { - struct pxa2xx_flash_info *info = dev_get_drvdata(dev); + struct pxa2xx_flash_info *info = platform_get_drvdata(dev); if (info && info->mtd->suspend(info->mtd) == 0) info->mtd->resume(info->mtd); @@ -172,11 +171,13 @@ static void pxa2xx_flash_shutdown(struct device *dev) #define pxa2xx_flash_shutdown NULL #endif -static struct device_driver pxa2xx_flash_driver = { - .name = "pxa2xx-flash", - .bus = &platform_bus_type, +static struct platform_driver pxa2xx_flash_driver = { + .driver = { + .name = "pxa2xx-flash", + .owner = THIS_MODULE, + }, .probe = pxa2xx_flash_probe, - .remove = __exit_p(pxa2xx_flash_remove), + .remove = __devexit_p(pxa2xx_flash_remove), .suspend = pxa2xx_flash_suspend, .resume = pxa2xx_flash_resume, .shutdown = pxa2xx_flash_shutdown, @@ -184,12 +185,12 @@ static struct device_driver pxa2xx_flash_driver = { static int __init init_pxa2xx_flash(void) { - return driver_register(&pxa2xx_flash_driver); + return platform_driver_register(&pxa2xx_flash_driver); } static void __exit cleanup_pxa2xx_flash(void) { - driver_unregister(&pxa2xx_flash_driver); + platform_driver_unregister(&pxa2xx_flash_driver); } module_init(init_pxa2xx_flash); diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c index ced14b5294d5..72446fb48d4b 100644 --- a/drivers/mtd/nand/excite_nandflash.c +++ b/drivers/mtd/nand/excite_nandflash.c @@ -128,11 +128,11 @@ static int excite_nand_devready(struct mtd_info *mtd) * The binding to the mtd and all allocated * resources are released. */ -static int __exit excite_nand_remove(struct device *dev) +static int __exit excite_nand_remove(struct platform_device *dev) { - struct excite_nand_drvdata * const this = dev_get_drvdata(dev); + struct excite_nand_drvdata * const this = platform_get_drvdata(dev); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); if (unlikely(!this)) { printk(KERN_ERR "%s: called %s without private data!!", @@ -159,9 +159,8 @@ static int __exit excite_nand_remove(struct device *dev) * it can allocate all necessary resources then calls the * nand layer to look for devices. */ -static int __init excite_nand_probe(struct device *dev) +static int __init excite_nand_probe(struct platform_device *pdev) { - struct platform_device * const pdev = to_platform_device(dev); struct excite_nand_drvdata *drvdata; /* private driver data */ struct nand_chip *board_chip; /* private flash chip data */ struct mtd_info *board_mtd; /* mtd info for this board */ @@ -175,7 +174,7 @@ static int __init excite_nand_probe(struct device *dev) } /* bind private data into driver */ - dev_set_drvdata(dev, drvdata); + platform_set_drvdata(pdev, drvdata); /* allocate and map the resource */ drvdata->regs = @@ -219,23 +218,25 @@ static int __init excite_nand_probe(struct device *dev) return 0; } -static struct device_driver excite_nand_driver = { - .name = "excite_nand", - .bus = &platform_bus_type, +static struct platform_driver excite_nand_driver = { + .driver = { + .name = "excite_nand", + .owner = THIS_MODULE, + }, .probe = excite_nand_probe, - .remove = __exit_p(excite_nand_remove) + .remove = __devexit_p(excite_nand_remove) }; static int __init excite_nand_init(void) { pr_info("Basler eXcite nand flash driver Version " EXCITE_NANDFLASH_VERSION "\n"); - return driver_register(&excite_nand_driver); + return platform_driver_register(&excite_nand_driver); } static void __exit excite_nand_exit(void) { - driver_unregister(&excite_nand_driver); + platform_driver_unregister(&excite_nand_driver); } module_init(excite_nand_init); diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 5b69e7773c6c..3a496c33fb52 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -36,10 +36,9 @@ struct onenand_info { struct onenand_chip onenand; }; -static int __devinit generic_onenand_probe(struct device *dev) +static int __devinit generic_onenand_probe(struct platform_device *pdev) { struct onenand_info *info; - struct platform_device *pdev = to_platform_device(dev); struct flash_platform_data *pdata = pdev->dev.platform_data; struct resource *res = pdev->resource; unsigned long size = res->end - res->start + 1; @@ -49,7 +48,7 @@ static int __devinit generic_onenand_probe(struct device *dev) if (!info) return -ENOMEM; - if (!request_mem_region(res->start, size, dev->driver->name)) { + if (!request_mem_region(res->start, size, pdev->dev.driver->name)) { err = -EBUSY; goto out_free_info; } @@ -82,7 +81,7 @@ static int __devinit generic_onenand_probe(struct device *dev) #endif err = add_mtd_device(&info->mtd); - dev_set_drvdata(&pdev->dev, info); + platform_set_drvdata(pdev, info); return 0; @@ -96,14 +95,13 @@ out_free_info: return err; } -static int __devexit generic_onenand_remove(struct device *dev) +static int __devexit generic_onenand_remove(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); - struct onenand_info *info = dev_get_drvdata(&pdev->dev); + struct onenand_info *info = platform_get_drvdata(pdev); struct resource *res = pdev->resource; unsigned long size = res->end - res->start + 1; - dev_set_drvdata(&pdev->dev, NULL); + platform_set_drvdata(pdev, NULL); if (info) { if (info->parts) @@ -120,9 +118,11 @@ static int __devexit generic_onenand_remove(struct device *dev) return 0; } -static struct device_driver generic_onenand_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver generic_onenand_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, .probe = generic_onenand_probe, .remove = __devexit_p(generic_onenand_remove), }; @@ -131,12 +131,12 @@ MODULE_ALIAS(DRIVER_NAME); static int __init generic_onenand_init(void) { - return driver_register(&generic_onenand_driver); + return platform_driver_register(&generic_onenand_driver); } static void __exit generic_onenand_exit(void) { - driver_unregister(&generic_onenand_driver); + platform_driver_unregister(&generic_onenand_driver); } module_init(generic_onenand_init); diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c index 4e7a5faf0351..664835b822fb 100644 --- a/drivers/net/mipsnet.c +++ b/drivers/net/mipsnet.c @@ -237,7 +237,7 @@ static void mipsnet_set_mclist(struct net_device *dev) { } -static int __init mipsnet_probe(struct device *dev) +static int __init mipsnet_probe(struct platform_device *dev) { struct net_device *netdev; int err; @@ -248,7 +248,7 @@ static int __init mipsnet_probe(struct device *dev) goto out; } - dev_set_drvdata(dev, netdev); + platform_set_drvdata(dev, netdev); netdev->open = mipsnet_open; netdev->stop = mipsnet_close; @@ -293,23 +293,25 @@ out: return err; } -static int __devexit mipsnet_device_remove(struct device *device) +static int __devexit mipsnet_device_remove(struct platform_device *device) { - struct net_device *dev = dev_get_drvdata(device); + struct net_device *dev = platform_get_drvdata(device); unregister_netdev(dev); release_region(dev->base_addr, sizeof(struct mipsnet_regs)); free_netdev(dev); - dev_set_drvdata(device, NULL); + platform_set_drvdata(device, NULL); return 0; } -static struct device_driver mipsnet_driver = { - .name = mipsnet_string, - .bus = &platform_bus_type, - .probe = mipsnet_probe, - .remove = __devexit_p(mipsnet_device_remove), +static struct platform_driver mipsnet_driver = { + .driver = { + .name = mipsnet_string, + .owner = THIS_MODULE, + }, + .probe = mipsnet_probe, + .remove = __devexit_p(mipsnet_device_remove), }; static int __init mipsnet_init_module(void) @@ -319,7 +321,7 @@ static int __init mipsnet_init_module(void) printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. " "(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION); - err = driver_register(&mipsnet_driver); + err = platform_driver_register(&mipsnet_driver); if (err) printk(KERN_ERR "Driver registration failed\n"); @@ -328,7 +330,7 @@ static int __init mipsnet_init_module(void) static void __exit mipsnet_exit_module(void) { - driver_unregister(&mipsnet_driver); + platform_driver_unregister(&mipsnet_driver); } module_init(mipsnet_init_module); diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index fc1de46fd20a..90013341cd5f 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -468,13 +468,13 @@ out: return ret; } -int au1x00_drv_pcmcia_remove(struct device *dev) +int au1x00_drv_pcmcia_remove(struct platform_device *dev) { - struct skt_dev_info *sinfo = dev_get_drvdata(dev); + struct skt_dev_info *sinfo = platform_get_drvdata(dev); int i; mutex_lock(&pcmcia_sockets_lock); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); for (i = 0; i < sinfo->nskt; i++) { struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i); @@ -498,13 +498,13 @@ int au1x00_drv_pcmcia_remove(struct device *dev) * PCMCIA "Driver" API */ -static int au1x00_drv_pcmcia_probe(struct device *dev) +static int au1x00_drv_pcmcia_probe(struct platform_device *dev) { int i, ret = -ENODEV; mutex_lock(&pcmcia_sockets_lock); for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) { - ret = au1x00_pcmcia_hw_init[i](dev); + ret = au1x00_pcmcia_hw_init[i](&dev->dev); if (ret == 0) break; } @@ -512,14 +512,26 @@ static int au1x00_drv_pcmcia_probe(struct device *dev) return ret; } +static int au1x00_drv_pcmcia_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int au1x00_drv_pcmcia_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} -static struct device_driver au1x00_pcmcia_driver = { +static struct platform_driver au1x00_pcmcia_driver = { + .driver = { + .name = "au1x00-pcmcia", + .owner = THIS_MODULE, + }, .probe = au1x00_drv_pcmcia_probe, .remove = au1x00_drv_pcmcia_remove, - .name = "au1x00-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, + .suspend = au1x00_drv_pcmcia_suspend, + .resume = au1x00_drv_pcmcia_resume, }; @@ -533,8 +545,7 @@ static struct device_driver au1x00_pcmcia_driver = { static int __init au1x00_pcmcia_init(void) { int error = 0; - if ((error = driver_register(&au1x00_pcmcia_driver))) - return error; + error = platform_driver_register(&au1x00_pcmcia_driver); return error; } @@ -544,7 +555,7 @@ static int __init au1x00_pcmcia_init(void) */ static void __exit au1x00_pcmcia_exit(void) { - driver_unregister(&au1x00_pcmcia_driver); + platform_driver_unregister(&au1x00_pcmcia_driver); } module_init(au1x00_pcmcia_init); diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 71653ab84890..40d4953e4b12 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1238,6 +1238,16 @@ static int pcic_init(struct pcmcia_socket *s) return 0; } +static int i82365_drv_pcmcia_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int i82365_drv_pcmcia_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} static struct pccard_operations pcic_operations = { .init = pcic_init, .get_status = pcic_get_status, @@ -1248,11 +1258,13 @@ static struct pccard_operations pcic_operations = { /*====================================================================*/ -static struct device_driver i82365_driver = { - .name = "i82365", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, +static struct platform_driver i82365_driver = { + .driver = { + .name = "i82365", + .owner = THIS_MODULE, + }, + .suspend = i82365_drv_pcmcia_suspend, + .resume = i82365_drv_pcmcia_resume, }; static struct platform_device *i82365_device; @@ -1261,7 +1273,7 @@ static int __init init_i82365(void) { int i, ret; - ret = driver_register(&i82365_driver); + ret = platform_driver_register(&i82365_driver); if (ret) goto err_out; @@ -1337,7 +1349,7 @@ err_dev_unregister: pnp_disable_dev(i82365_pnpdev); #endif err_driver_unregister: - driver_unregister(&i82365_driver); + platform_driver_unregister(&i82365_driver); err_out: return ret; } /* init_i82365 */ @@ -1365,7 +1377,7 @@ static void __exit exit_i82365(void) if (i82365_pnpdev) pnp_disable_dev(i82365_pnpdev); #endif - driver_unregister(&i82365_driver); + platform_driver_unregister(&i82365_driver); } /* exit_i82365 */ module_init(init_i82365); diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 2ab4f22c21de..62b4ecc97c46 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -696,13 +696,25 @@ static struct pccard_operations pcc_operations = { .set_mem_map = pcc_set_mem_map, }; +static int cfc_drv_pcmcia_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int cfc_drv_pcmcia_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} /*====================================================================*/ -static struct device_driver pcc_driver = { - .name = "cfc", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, +static struct platform_driver pcc_driver = { + .driver = { + .name = "cfc", + .owner = THIS_MODULE, + }, + .suspend = cfc_drv_pcmcia_suspend, + .resume = cfc_drv_pcmcia_resume, }; static struct platform_device pcc_device = { @@ -716,13 +728,13 @@ static int __init init_m32r_pcc(void) { int i, ret; - ret = driver_register(&pcc_driver); + ret = platform_driver_register(&pcc_driver); if (ret) return ret; ret = platform_device_register(&pcc_device); if (ret){ - driver_unregister(&pcc_driver); + platform_driver_unregister(&pcc_driver); return ret; } @@ -754,7 +766,7 @@ static int __init init_m32r_pcc(void) if (pcc_sockets == 0) { printk("socket is not found.\n"); platform_device_unregister(&pcc_device); - driver_unregister(&pcc_driver); + platform_driver_unregister(&pcc_driver); return -ENODEV; } @@ -802,7 +814,7 @@ static void __exit exit_m32r_pcc(void) if (poll_interval != 0) del_timer_sync(&poll_timer); - driver_unregister(&pcc_driver); + platform_driver_unregister(&pcc_driver); } /* exit_m32r_pcc */ module_init(init_m32r_pcc); diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 2f108c23dbd9..12034b41d196 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -672,13 +672,25 @@ static struct pccard_operations pcc_operations = { .set_mem_map = pcc_set_mem_map, }; +static int pcc_drv_pcmcia_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int pcc_drv_pcmcia_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} /*====================================================================*/ -static struct device_driver pcc_driver = { - .name = "pcc", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, +static struct platform_driver pcc_driver = { + .driver = { + .name = "pcc", + .owner = THIS_MODULE, + }, + .suspend = pcc_drv_pcmcia_suspend, + .resume = pcc_drv_pcmcia_resume, }; static struct platform_device pcc_device = { @@ -692,13 +704,13 @@ static int __init init_m32r_pcc(void) { int i, ret; - ret = driver_register(&pcc_driver); + ret = platform_driver_register(&pcc_driver); if (ret) return ret; ret = platform_device_register(&pcc_device); if (ret){ - driver_unregister(&pcc_driver); + platform_driver_unregister(&pcc_driver); return ret; } @@ -715,7 +727,7 @@ static int __init init_m32r_pcc(void) if (pcc_sockets == 0) { printk("socket is not found.\n"); platform_device_unregister(&pcc_device); - driver_unregister(&pcc_driver); + platform_driver_unregister(&pcc_driver); return -ENODEV; } @@ -763,7 +775,7 @@ static void __exit exit_m32r_pcc(void) if (poll_interval != 0) del_timer_sync(&poll_timer); - driver_unregister(&pcc_driver); + platform_driver_unregister(&pcc_driver); } /* exit_m32r_pcc */ module_init(init_m32r_pcc); diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index c5b2a44b4c37..d8da5ac844e9 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -65,7 +65,7 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { #endif }; -static int sa11x0_drv_pcmcia_probe(struct device *dev) +static int sa11x0_drv_pcmcia_probe(struct platform_device *dev) { int i, ret = -ENODEV; @@ -73,7 +73,7 @@ static int sa11x0_drv_pcmcia_probe(struct device *dev) * Initialise any "on-board" PCMCIA sockets. */ for (i = 0; i < ARRAY_SIZE(sa11x0_pcmcia_hw_init); i++) { - ret = sa11x0_pcmcia_hw_init[i](dev); + ret = sa11x0_pcmcia_hw_init[i](&dev->dev); if (ret == 0) break; } @@ -81,13 +81,31 @@ static int sa11x0_drv_pcmcia_probe(struct device *dev) return ret; } -static struct device_driver sa11x0_pcmcia_driver = { +static int sa11x0_drv_pcmcia_remove(struct platform_device *dev) +{ + return soc_common_drv_pcmcia_remove(&dev->dev); +} + +static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int sa11x0_drv_pcmcia_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} + +static struct platform_driver sa11x0_pcmcia_driver = { + .driver = { + .name = "sa11x0-pcmcia", + .owner = THIS_MODULE, + }, .probe = sa11x0_drv_pcmcia_probe, - .remove = soc_common_drv_pcmcia_remove, - .name = "sa11x0-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, + .remove = sa11x0_drv_pcmcia_remove, + .suspend = sa11x0_drv_pcmcia_suspend, + .resume = sa11x0_drv_pcmcia_resume, }; /* sa11x0_pcmcia_init() @@ -100,7 +118,7 @@ static struct device_driver sa11x0_pcmcia_driver = { */ static int __init sa11x0_pcmcia_init(void) { - return driver_register(&sa11x0_pcmcia_driver); + return platform_driver_register(&sa11x0_pcmcia_driver); } /* sa11x0_pcmcia_exit() @@ -110,7 +128,7 @@ static int __init sa11x0_pcmcia_init(void) */ static void __exit sa11x0_pcmcia_exit(void) { - driver_unregister(&sa11x0_pcmcia_driver); + platform_driver_unregister(&sa11x0_pcmcia_driver); } MODULE_AUTHOR("John Dorsey "); diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 2a613e920fd4..9ad97ea836e8 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -363,13 +363,25 @@ static int __init get_tcic_id(void) return id; } +static int tcic_drv_pcmcia_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int tcic_drv_pcmcia_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} /*====================================================================*/ -static struct device_driver tcic_driver = { - .name = "tcic-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, +static struct platform_driver tcic_driver = { + .driver = { + .name = "tcic-pcmcia", + .owner = THIS_MODULE, + }, + .suspend = tcic_drv_pcmcia_suspend, + .resume = tcic_drv_pcmcia_resume, }; static struct platform_device tcic_device = { @@ -383,7 +395,7 @@ static int __init init_tcic(void) int i, sock, ret = 0; u_int mask, scan; - if (driver_register(&tcic_driver)) + if (platform_driver_register(&tcic_driver)) return -1; printk(KERN_INFO "Databook TCIC-2 PCMCIA probe: "); @@ -391,7 +403,7 @@ static int __init init_tcic(void) if (!request_region(tcic_base, 16, "tcic-2")) { printk("could not allocate ports,\n "); - driver_unregister(&tcic_driver); + platform_driver_unregister(&tcic_driver); return -ENODEV; } else { @@ -414,7 +426,7 @@ static int __init init_tcic(void) if (sock == 0) { printk("not found.\n"); release_region(tcic_base, 16); - driver_unregister(&tcic_driver); + platform_driver_unregister(&tcic_driver); return -ENODEV; } @@ -542,7 +554,7 @@ static void __exit exit_tcic(void) } platform_device_unregister(&tcic_device); - driver_unregister(&tcic_driver); + platform_driver_unregister(&tcic_driver); } /* exit_tcic */ /*====================================================================*/ diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index b2c412419059..659421d0ca46 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -704,24 +704,37 @@ static int __devinit vrc4171_card_setup(char *options) __setup("vrc4171_card=", vrc4171_card_setup); -static struct device_driver vrc4171_card_driver = { - .name = vrc4171_card_name, - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, +static int vrc4171_card_suspend(struct platform_device *dev, + pm_message_t state) +{ + return pcmcia_socket_dev_suspend(&dev->dev, state); +} + +static int vrc4171_card_resume(struct platform_device *dev) +{ + return pcmcia_socket_dev_resume(&dev->dev); +} + +static struct platform_driver vrc4171_card_driver = { + .driver = { + .name = vrc4171_card_name, + .owner = THIS_MODULE, + }, + .suspend = vrc4171_card_suspend, + .resume = vrc4171_card_resume, }; static int __devinit vrc4171_card_init(void) { int retval; - retval = driver_register(&vrc4171_card_driver); + retval = platform_driver_register(&vrc4171_card_driver); if (retval < 0) return retval; retval = platform_device_register(&vrc4171_card_device); if (retval < 0) { - driver_unregister(&vrc4171_card_driver); + platform_driver_unregister(&vrc4171_card_driver); return retval; } @@ -735,11 +748,12 @@ static int __devinit vrc4171_card_init(void) if (retval < 0) { vrc4171_remove_sockets(); platform_device_unregister(&vrc4171_card_device); - driver_unregister(&vrc4171_card_driver); + platform_driver_unregister(&vrc4171_card_driver); return retval; } - printk(KERN_INFO "%s, connected to IRQ %d\n", vrc4171_card_driver.name, vrc4171_irq); + printk(KERN_INFO "%s, connected to IRQ %d\n", + vrc4171_card_driver.driver.name, vrc4171_irq); return 0; } @@ -749,7 +763,7 @@ static void __devexit vrc4171_card_exit(void) free_irq(vrc4171_irq, vrc4171_sockets); vrc4171_remove_sockets(); platform_device_unregister(&vrc4171_card_device); - driver_unregister(&vrc4171_card_driver); + platform_driver_unregister(&vrc4171_card_driver); } module_init(vrc4171_card_init); diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c index d4bda2017746..6d25aca7b412 100644 --- a/drivers/scsi/a4000t.c +++ b/drivers/scsi/a4000t.c @@ -35,7 +35,7 @@ static struct platform_device *a4000t_scsi_device; #define A4000T_SCSI_ADDR 0xdd0040 -static int __devinit a4000t_probe(struct device *dev) +static int __devinit a4000t_probe(struct platform_device *dev) { struct Scsi_Host *host; struct NCR_700_Host_Parameters *hostdata; @@ -78,7 +78,7 @@ static int __devinit a4000t_probe(struct device *dev) goto out_put_host; } - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); scsi_scan_host(host); return 0; @@ -93,9 +93,9 @@ static int __devinit a4000t_probe(struct device *dev) return -ENODEV; } -static __devexit int a4000t_device_remove(struct device *dev) +static __devexit int a4000t_device_remove(struct platform_device *dev) { - struct Scsi_Host *host = dev_get_drvdata(dev); + struct Scsi_Host *host = platform_get_drvdata(dev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); scsi_remove_host(host); @@ -108,25 +108,27 @@ static __devexit int a4000t_device_remove(struct device *dev) return 0; } -static struct device_driver a4000t_scsi_driver = { - .name = "a4000t-scsi", - .bus = &platform_bus_type, - .probe = a4000t_probe, - .remove = __devexit_p(a4000t_device_remove), +static struct platform_driver a4000t_scsi_driver = { + .driver = { + .name = "a4000t-scsi", + .owner = THIS_MODULE, + }, + .probe = a4000t_probe, + .remove = __devexit_p(a4000t_device_remove), }; static int __init a4000t_scsi_init(void) { int err; - err = driver_register(&a4000t_scsi_driver); + err = platform_driver_register(&a4000t_scsi_driver); if (err) return err; a4000t_scsi_device = platform_device_register_simple("a4000t-scsi", -1, NULL, 0); if (IS_ERR(a4000t_scsi_device)) { - driver_unregister(&a4000t_scsi_driver); + platform_driver_register(&a4000t_scsi_driver); return PTR_ERR(a4000t_scsi_device); } @@ -136,7 +138,7 @@ static int __init a4000t_scsi_init(void) static void __exit a4000t_scsi_exit(void) { platform_device_unregister(a4000t_scsi_device); - driver_unregister(&a4000t_scsi_driver); + platform_driver_unregister(&a4000t_scsi_driver); } module_init(a4000t_scsi_init); diff --git a/drivers/scsi/bvme6000_scsi.c b/drivers/scsi/bvme6000_scsi.c index d858f3d41274..9e9a82b03f2d 100644 --- a/drivers/scsi/bvme6000_scsi.c +++ b/drivers/scsi/bvme6000_scsi.c @@ -34,7 +34,7 @@ static struct scsi_host_template bvme6000_scsi_driver_template = { static struct platform_device *bvme6000_scsi_device; static __devinit int -bvme6000_probe(struct device *dev) +bvme6000_probe(struct platform_device *dev) { struct Scsi_Host *host; struct NCR_700_Host_Parameters *hostdata; @@ -73,7 +73,7 @@ bvme6000_probe(struct device *dev) goto out_put_host; } - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); scsi_scan_host(host); return 0; @@ -87,9 +87,9 @@ bvme6000_probe(struct device *dev) } static __devexit int -bvme6000_device_remove(struct device *dev) +bvme6000_device_remove(struct platform_device *dev) { - struct Scsi_Host *host = dev_get_drvdata(dev); + struct Scsi_Host *host = platform_get_drvdata(dev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); scsi_remove_host(host); @@ -100,25 +100,27 @@ bvme6000_device_remove(struct device *dev) return 0; } -static struct device_driver bvme6000_scsi_driver = { - .name = "bvme6000-scsi", - .bus = &platform_bus_type, - .probe = bvme6000_probe, - .remove = __devexit_p(bvme6000_device_remove), +static struct platform_driver bvme6000_scsi_driver = { + .driver = { + .name = "bvme6000-scsi", + .owner = THIS_MODULE, + }, + .probe = bvme6000_probe, + .remove = __devexit_p(bvme6000_device_remove), }; static int __init bvme6000_scsi_init(void) { int err; - err = driver_register(&bvme6000_scsi_driver); + err = platform_driver_register(&bvme6000_scsi_driver); if (err) return err; bvme6000_scsi_device = platform_device_register_simple("bvme6000-scsi", -1, NULL, 0); if (IS_ERR(bvme6000_scsi_device)) { - driver_unregister(&bvme6000_scsi_driver); + platform_driver_unregister(&bvme6000_scsi_driver); return PTR_ERR(bvme6000_scsi_device); } @@ -128,7 +130,7 @@ static int __init bvme6000_scsi_init(void) static void __exit bvme6000_scsi_exit(void) { platform_device_unregister(bvme6000_scsi_device); - driver_unregister(&bvme6000_scsi_driver); + platform_driver_unregister(&bvme6000_scsi_driver); } module_init(bvme6000_scsi_init); diff --git a/drivers/scsi/mvme16x_scsi.c b/drivers/scsi/mvme16x_scsi.c index b264b499d982..7794fc158b17 100644 --- a/drivers/scsi/mvme16x_scsi.c +++ b/drivers/scsi/mvme16x_scsi.c @@ -34,7 +34,7 @@ static struct scsi_host_template mvme16x_scsi_driver_template = { static struct platform_device *mvme16x_scsi_device; static __devinit int -mvme16x_probe(struct device *dev) +mvme16x_probe(struct platform_device *dev) { struct Scsi_Host * host = NULL; struct NCR_700_Host_Parameters *hostdata; @@ -88,7 +88,7 @@ mvme16x_probe(struct device *dev) out_be32(0xfff4202c, v); } - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); scsi_scan_host(host); return 0; @@ -102,9 +102,9 @@ mvme16x_probe(struct device *dev) } static __devexit int -mvme16x_device_remove(struct device *dev) +mvme16x_device_remove(struct platform_device *dev) { - struct Scsi_Host *host = dev_get_drvdata(dev); + struct Scsi_Host *host = platform_get_drvdata(dev); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); /* Disable scsi chip ints */ @@ -123,25 +123,27 @@ mvme16x_device_remove(struct device *dev) return 0; } -static struct device_driver mvme16x_scsi_driver = { - .name = "mvme16x-scsi", - .bus = &platform_bus_type, - .probe = mvme16x_probe, - .remove = __devexit_p(mvme16x_device_remove), +static struct platform_driver mvme16x_scsi_driver = { + .driver = { + .name = "mvme16x-scsi", + .owner = THIS_MODULE, + }, + .probe = mvme16x_probe, + .remove = __devexit_p(mvme16x_device_remove), }; static int __init mvme16x_scsi_init(void) { int err; - err = driver_register(&mvme16x_scsi_driver); + err = platform_driver_register(&mvme16x_scsi_driver); if (err) return err; mvme16x_scsi_device = platform_device_register_simple("mvme16x-scsi", -1, NULL, 0); if (IS_ERR(mvme16x_scsi_device)) { - driver_unregister(&mvme16x_scsi_driver); + platform_driver_unregister(&mvme16x_scsi_driver); return PTR_ERR(mvme16x_scsi_device); } @@ -151,7 +153,7 @@ static int __init mvme16x_scsi_init(void) static void __exit mvme16x_scsi_exit(void) { platform_device_unregister(mvme16x_scsi_device); - driver_unregister(&mvme16x_scsi_driver); + platform_driver_unregister(&mvme16x_scsi_driver); } module_init(mvme16x_scsi_init); diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 62bd4441b5e0..378f27745a1d 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -457,7 +457,7 @@ static struct fb_ops au1100fb_ops = /* AU1100 LCD controller device driver */ -static int __init au1100fb_drv_probe(struct device *dev) +static int __init au1100fb_drv_probe(struct platform_device *dev) { struct au1100fb_device *fbdev = NULL; struct resource *regs_res; @@ -475,7 +475,7 @@ static int __init au1100fb_drv_probe(struct device *dev) fbdev->panel = &known_lcd_panels[drv_info.panel_idx]; - dev_set_drvdata(dev, (void*)fbdev); + platform_set_drvdata(dev, (void *)fbdev); /* Allocate region for our registers and map them */ if (!(regs_res = platform_get_resource(to_platform_device(dev), @@ -583,19 +583,19 @@ failed: fb_dealloc_cmap(&fbdev->info.cmap); } kfree(fbdev); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); return 0; } -int au1100fb_drv_remove(struct device *dev) +int au1100fb_drv_remove(struct platform_device *dev) { struct au1100fb_device *fbdev = NULL; if (!dev) return -ENODEV; - fbdev = (struct au1100fb_device*) dev_get_drvdata(dev); + fbdev = (struct au1100fb_device *) platform_get_drvdata(dev); #if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO) au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info); @@ -620,9 +620,9 @@ int au1100fb_drv_remove(struct device *dev) static u32 sys_clksrc; static struct au1100fb_regs fbregs; -int au1100fb_drv_suspend(struct device *dev, pm_message_t state) +int au1100fb_drv_suspend(struct platform_device *dev, pm_message_t state) { - struct au1100fb_device *fbdev = dev_get_drvdata(dev); + struct au1100fb_device *fbdev = platform_get_drvdata(dev); if (!fbdev) return 0; @@ -641,9 +641,9 @@ int au1100fb_drv_suspend(struct device *dev, pm_message_t state) return 0; } -int au1100fb_drv_resume(struct device *dev) +int au1100fb_drv_resume(struct platform_device *dev) { - struct au1100fb_device *fbdev = dev_get_drvdata(dev); + struct au1100fb_device *fbdev = platform_get_drvdata(dev); if (!fbdev) return 0; @@ -663,10 +663,11 @@ int au1100fb_drv_resume(struct device *dev) #define au1100fb_drv_resume NULL #endif -static struct device_driver au1100fb_driver = { - .name = "au1100-lcd", - .bus = &platform_bus_type, - +static struct platform_driver au1100fb_driver = { + .driver = { + .name = "au1100-lcd", + .owner = THIS_MODULE, + }, .probe = au1100fb_drv_probe, .remove = au1100fb_drv_remove, .suspend = au1100fb_drv_suspend, @@ -753,12 +754,12 @@ int __init au1100fb_init(void) return ret; } - return driver_register(&au1100fb_driver); + return platform_driver_register(&au1100fb_driver); } void __exit au1100fb_cleanup(void) { - driver_unregister(&au1100fb_driver); + platform_driver_unregister(&au1100fb_driver); kfree(drv_info.opt_mode); } diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 03e57ef88378..0d96f1d2d4c5 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -1622,7 +1622,7 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev) /* AU1200 LCD controller device driver */ -static int au1200fb_drv_probe(struct device *dev) +static int au1200fb_drv_probe(struct platform_device *dev) { struct au1200fb_device *fbdev; unsigned long page; @@ -1645,7 +1645,7 @@ static int au1200fb_drv_probe(struct device *dev) /* Allocate the framebuffer to the maximum screen size */ fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8; - fbdev->fb_mem = dma_alloc_noncoherent(dev, + fbdev->fb_mem = dma_alloc_noncoherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), &fbdev->fb_phys, GFP_KERNEL); if (!fbdev->fb_mem) { @@ -1715,7 +1715,7 @@ failed: return ret; } -static int au1200fb_drv_remove(struct device *dev) +static int au1200fb_drv_remove(struct platform_device *dev) { struct au1200fb_device *fbdev; int plane; @@ -1733,7 +1733,8 @@ static int au1200fb_drv_remove(struct device *dev) /* Clean up all probe data */ unregister_framebuffer(&fbdev->fb_info); if (fbdev->fb_mem) - dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len), + dma_free_noncoherent(&dev->dev, + PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys); if (fbdev->fb_info.cmap.len != 0) fb_dealloc_cmap(&fbdev->fb_info.cmap); @@ -1747,22 +1748,24 @@ static int au1200fb_drv_remove(struct device *dev) } #ifdef CONFIG_PM -static int au1200fb_drv_suspend(struct device *dev, u32 state, u32 level) +static int au1200fb_drv_suspend(struct platform_device *dev, u32 state) { /* TODO */ return 0; } -static int au1200fb_drv_resume(struct device *dev, u32 level) +static int au1200fb_drv_resume(struct platform_device *dev) { /* TODO */ return 0; } #endif /* CONFIG_PM */ -static struct device_driver au1200fb_driver = { - .name = "au1200-lcd", - .bus = &platform_bus_type, +static struct platform_driver au1200fb_driver = { + .driver = { + .name = "au1200-lcd", + .owner = THIS_MODULE, + }, .probe = au1200fb_drv_probe, .remove = au1200fb_drv_remove, #ifdef CONFIG_PM @@ -1906,12 +1909,12 @@ static int __init au1200fb_init(void) printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n"); #endif - return driver_register(&au1200fb_driver); + return platform_driver_register(&au1200fb_driver); } static void __exit au1200fb_cleanup(void) { - driver_unregister(&au1200fb_driver); + platform_driver_unregister(&au1200fb_driver); } module_init(au1200fb_init); diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c index f1ae3729a19e..cce1982a1b58 100644 --- a/drivers/watchdog/rm9k_wdt.c +++ b/drivers/watchdog/rm9k_wdt.c @@ -59,8 +59,8 @@ static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int); -static int __init wdt_gpi_probe(struct device *); -static int __exit wdt_gpi_remove(struct device *); +static int __init wdt_gpi_probe(struct platform_device *); +static int __exit wdt_gpi_remove(struct platform_device *); static const char wdt_gpi_name[] = "wdt_gpi"; @@ -346,10 +346,9 @@ static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, } /* No hotplugging on the platform bus - use __init */ -static int __init wdt_gpi_probe(struct device *dev) +static int __init wdt_gpi_probe(struct platform_device *pdv) { int res; - struct platform_device * const pdv = to_platform_device(dev); const struct resource * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, IORESOURCE_MEM), @@ -374,7 +373,7 @@ static int __init wdt_gpi_probe(struct device *dev) return res; } -static int __exit wdt_gpi_remove(struct device *dev) +static int __exit wdt_gpi_remove(struct platform_device *dev) { int res; @@ -387,15 +386,13 @@ static int __exit wdt_gpi_remove(struct device *dev) /* Device driver init & exit */ -static struct device_driver wdt_gpi_driver = { - .name = (char *) wdt_gpi_name, - .bus = &platform_bus_type, - .owner = THIS_MODULE, +static struct platform_driver wgt_gpi_driver = { + .driver = { + .name = wdt_gpi_name, + .owner = THIS_MODULE, + }, .probe = wdt_gpi_probe, - .remove = __exit_p(wdt_gpi_remove), - .shutdown = NULL, - .suspend = NULL, - .resume = NULL, + .remove = __devexit_p(wdt_gpi_remove), }; static int __init wdt_gpi_init_module(void) @@ -403,12 +400,12 @@ static int __init wdt_gpi_init_module(void) atomic_set(&opencnt, 1); if (timeout > MAX_TIMEOUT_SECONDS) timeout = MAX_TIMEOUT_SECONDS; - return driver_register(&wdt_gpi_driver); + return platform_driver_register(&wdt_gpi_driver); } static void __exit wdt_gpi_cleanup_module(void) { - driver_unregister(&wdt_gpi_driver); + platform_driver_unregister(&wdt_gpi_driver); } module_init(wdt_gpi_init_module); -- cgit v1.2.3 From e5779a583ddb9916b37cfbb916dc53ec2eaf0b9b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 11 Mar 2009 09:23:52 +0100 Subject: scsi/m68k: Kill NCR_700_detect() warnings The patch from Ming Lei entitled: platform driver: fix incorrect use of 'platform_bus_type' with 'struct devic introduced the following warnings on m68k, as `dev' is now a `struct platform_device *' instead of a `struct device *': | drivers/scsi/a4000t.c:64: warning: passing argument 3 of 'NCR_700_detect' from incompatible pointer type | drivers/scsi/mvme16x_scsi.c:67: warning: passing argument 3 of 'NCR_700_detect' from incompatible pointer type | drivers/scsi/bvme6000_scsi.c:61: warning: passing argument 3 of 'NCR_700_detect' from incompatible pointer type I think the below is missing (untested on real hardware). Signed-off-by: Geert Uytterhoeven Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/a4000t.c | 3 ++- drivers/scsi/bvme6000_scsi.c | 3 ++- drivers/scsi/mvme16x_scsi.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c index 6d25aca7b412..61af3d91ac8a 100644 --- a/drivers/scsi/a4000t.c +++ b/drivers/scsi/a4000t.c @@ -61,7 +61,8 @@ static int __devinit a4000t_probe(struct platform_device *dev) hostdata->dcntl_extra = EA_710; /* and register the chip */ - host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata, dev); + host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata, + &dev->dev); if (!host) { printk(KERN_ERR "a4000t-scsi: No host detected; " "board configuration problem?\n"); diff --git a/drivers/scsi/bvme6000_scsi.c b/drivers/scsi/bvme6000_scsi.c index 9e9a82b03f2d..5799cb5cba6b 100644 --- a/drivers/scsi/bvme6000_scsi.c +++ b/drivers/scsi/bvme6000_scsi.c @@ -58,7 +58,8 @@ bvme6000_probe(struct platform_device *dev) hostdata->ctest7_extra = CTEST7_TT1; /* and register the chip */ - host = NCR_700_detect(&bvme6000_scsi_driver_template, hostdata, dev); + host = NCR_700_detect(&bvme6000_scsi_driver_template, hostdata, + &dev->dev); if (!host) { printk(KERN_ERR "bvme6000-scsi: No host detected; " "board configuration problem?\n"); diff --git a/drivers/scsi/mvme16x_scsi.c b/drivers/scsi/mvme16x_scsi.c index 7794fc158b17..b5fbfd6ce870 100644 --- a/drivers/scsi/mvme16x_scsi.c +++ b/drivers/scsi/mvme16x_scsi.c @@ -64,7 +64,8 @@ mvme16x_probe(struct platform_device *dev) hostdata->ctest7_extra = CTEST7_TT1; /* and register the chip */ - host = NCR_700_detect(&mvme16x_scsi_driver_template, hostdata, dev); + host = NCR_700_detect(&mvme16x_scsi_driver_template, hostdata, + &dev->dev); if (!host) { printk(KERN_ERR "mvme16x-scsi: No host detected; " "board configuration problem?\n"); -- cgit v1.2.3 From f48f3febb2cbfd0f2ecee7690835ba745c1034a4 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Sat, 14 Feb 2009 21:23:22 +0800 Subject: driver-core: do not register a driver with bus_type not registered If the bus_type is not registerd, driver_register to that bus will cause oops. I found this bug when test built-in usb serial drivers (ie. aircable driver) with 'nousb' cmdline params. In this patch: 1. set the bus->p=NULL when bus_register failed and unregisterd. 2. if bus->p is NULL, driver_register BUG_ON will be triggered. Signed-off-by: Dave Young Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 2 ++ drivers/base/driver.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 8547b780bb5a..11463c00451e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -932,6 +932,7 @@ bus_uevent_fail: kset_unregister(&bus->p->subsys); kfree(bus->p); out: + bus->p = NULL; return retval; } EXPORT_SYMBOL_GPL(bus_register); @@ -953,6 +954,7 @@ void bus_unregister(struct bus_type *bus) bus_remove_file(bus, &bus_attr_uevent); kset_unregister(&bus->p->subsys); kfree(bus->p); + bus->p = NULL; } EXPORT_SYMBOL_GPL(bus_unregister); diff --git a/drivers/base/driver.c b/drivers/base/driver.c index 1e2bda780e48..2889ad57e48b 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -216,6 +216,8 @@ int driver_register(struct device_driver *drv) int ret; struct device_driver *other; + BUG_ON(!drv->bus->p); + if ((drv->bus->probe && drv->probe) || (drv->bus->remove && drv->remove) || (drv->bus->shutdown && drv->shutdown)) -- cgit v1.2.3 From 425cb02912d1095febfeaf8d379af7b2ac9e4a89 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 12 Feb 2009 10:56:59 -0700 Subject: sysfs: sysfs_add_one WARNs with full path to duplicate filename sysfs: sysfs_add_one WARNs with full path to duplicate filename As a debugging aid, it can be useful to know the full path to a duplicate file being created in sysfs. We now will display warnings such as: sysfs: cannot create duplicate filename '/foo' when attempting to create multiple files named 'foo' in the sysfs root, or: sysfs: cannot create duplicate filename '/bus/pci/slots/5/foo' when attempting to create multiple files named 'foo' under a given directory in sysfs. The path displayed is always a relative path to sysfs_root. The leading '/' in the path name refers to the sysfs_root mount point, and should not be confused with the "real" '/'. Thanks to Alex Williamson for essentially writing sysfs_pathname. Cc: Alex Williamson Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/dir.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index 82d3b79d0e08..f13d852ab3c1 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -433,6 +433,26 @@ int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) return 0; } +/** + * sysfs_pathname - return full path to sysfs dirent + * @sd: sysfs_dirent whose path we want + * @path: caller allocated buffer + * + * Gives the name "/" to the sysfs_root entry; any path returned + * is relative to wherever sysfs is mounted. + * + * XXX: does no error checking on @path size + */ +static char *sysfs_pathname(struct sysfs_dirent *sd, char *path) +{ + if (sd->s_parent) { + sysfs_pathname(sd->s_parent, path); + strcat(path, "/"); + } + strcat(path, sd->s_name); + return path; +} + /** * sysfs_add_one - add sysfs_dirent to parent * @acxt: addrm context to use @@ -458,8 +478,16 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) int ret; ret = __sysfs_add_one(acxt, sd); - WARN(ret == -EEXIST, KERN_WARNING "sysfs: duplicate filename '%s' " - "can not be created\n", sd->s_name); + if (ret == -EEXIST) { + char *path = kzalloc(PATH_MAX, GFP_KERNEL); + WARN(1, KERN_WARNING + "sysfs: cannot create duplicate filename '%s'\n", + (path == NULL) ? sd->s_name : + strcat(strcat(sysfs_pathname(acxt->parent_sd, path), "/"), + sd->s_name)); + kfree(path); + } + return ret; } -- cgit v1.2.3 From 04256b4a8fc73f54cd14f20867882c299728a446 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 11 Feb 2009 13:20:23 -0800 Subject: sysfs: reference sysfs_dirent from sysfs inodes The sysfs_dirent serves as both an inode and a directory entry for sysfs. To prevent the sysfs inode numbers from being freed prematurely hold a reference to sysfs_dirent from the sysfs inode. [akpm@linux-foundation.org: add comment] Signed-off-by: Eric W. Biederman Cc: Tejun Heo Cc: Al Viro Cc: Cornelia Huck Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/inode.c | 17 +++++++++++++++++ fs/sysfs/mount.c | 1 + fs/sysfs/sysfs.h | 1 + 3 files changed, 19 insertions(+) diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c index dfa3d94cfc74..555f0ff988df 100644 --- a/fs/sysfs/inode.c +++ b/fs/sysfs/inode.c @@ -147,6 +147,7 @@ static void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode) { struct bin_attribute *bin_attr; + inode->i_private = sysfs_get(sd); inode->i_mapping->a_ops = &sysfs_aops; inode->i_mapping->backing_dev_info = &sysfs_backing_dev_info; inode->i_op = &sysfs_inode_operations; @@ -214,6 +215,22 @@ struct inode * sysfs_get_inode(struct sysfs_dirent *sd) return inode; } +/* + * The sysfs_dirent serves as both an inode and a directory entry for sysfs. + * To prevent the sysfs inode numbers from being freed prematurely we take a + * reference to sysfs_dirent from the sysfs inode. A + * super_operations.delete_inode() implementation is needed to drop that + * reference upon inode destruction. + */ +void sysfs_delete_inode(struct inode *inode) +{ + struct sysfs_dirent *sd = inode->i_private; + + truncate_inode_pages(&inode->i_data, 0); + clear_inode(inode); + sysfs_put(sd); +} + int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name) { struct sysfs_addrm_cxt acxt; diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c index 84ef378673a8..49749955ccaf 100644 --- a/fs/sysfs/mount.c +++ b/fs/sysfs/mount.c @@ -29,6 +29,7 @@ struct kmem_cache *sysfs_dir_cachep; static const struct super_operations sysfs_ops = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, + .delete_inode = sysfs_delete_inode, }; struct sysfs_dirent sysfs_root = { diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h index 93c6d6b27c4d..9055d04e4ab0 100644 --- a/fs/sysfs/sysfs.h +++ b/fs/sysfs/sysfs.h @@ -145,6 +145,7 @@ static inline void __sysfs_put(struct sysfs_dirent *sd) * inode.c */ struct inode *sysfs_get_inode(struct sysfs_dirent *sd); +void sysfs_delete_inode(struct inode *inode); int sysfs_setattr(struct dentry *dentry, struct iattr *iattr); int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name); int sysfs_inode_init(void); -- cgit v1.2.3 From b23530ebc339c4092ae2c9f37341a5398fea8b89 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 21 Feb 2009 16:45:07 +0800 Subject: driver core: remove polling for driver_probe_done(v5) This patch removes 100ms polling for driver_probe_done in wait_for_device_probe(), and uses wait_event() instead. Removing polling in fs initialization may lead to a faster boot. This patch also changes the return type of wait_for_device_done() from int to void. This patch is against Arjan's patch in linux-next tree. Signed-off-by: Ming Lei Acked-by: Cornelia Huck Reviewed-by: Arjan van de Ven Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 8 ++------ include/linux/device.h | 2 +- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 3f32df7ed373..0dfd08c15921 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -172,16 +172,12 @@ int driver_probe_done(void) /** * wait_for_device_probe * Wait for device probing to be completed. - * - * Note: this function polls at 100 msec intervals. */ -int wait_for_device_probe(void) +void wait_for_device_probe(void) { /* wait for the known devices to complete their probing */ - while (driver_probe_done() != 0) - msleep(100); + wait_event(probe_waitqueue, atomic_read(&probe_count) == 0); async_synchronize_full(); - return 0; } /** diff --git a/include/linux/device.h b/include/linux/device.h index d5706c448bcb..c56b154a0bf4 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -147,7 +147,7 @@ extern void put_driver(struct device_driver *drv); extern struct device_driver *driver_find(const char *name, struct bus_type *bus); extern int driver_probe_done(void); -extern int wait_for_device_probe(void); +extern void wait_for_device_probe(void); /* sysfs interface for exporting driver attributes */ -- cgit v1.2.3 From fb069a5d132fb926ed17af3211a114ac7cf27d7a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Dec 2008 12:23:36 -0800 Subject: driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 12 ++++++++++++ drivers/base/core.c | 9 +++++++++ include/linux/device.h | 3 +++ 3 files changed, 24 insertions(+) diff --git a/drivers/base/base.h b/drivers/base/base.h index ca2b0376685b..62a2cb5e1780 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -63,6 +63,18 @@ struct class_private { #define to_class(obj) \ container_of(obj, struct class_private, class_subsys.kobj) +/** + * struct device_private - structure to hold the private to the driver core portions of the device structure. + * + * @device - pointer back to the struct class that this structure is + * associated with. + * + * Nothing outside of the driver core should ever touch these fields. + */ +struct device_private { + struct device *device; +}; + /* initialisation functions */ extern int devices_init(void); extern int buses_init(void); diff --git a/drivers/base/core.c b/drivers/base/core.c index 059966b617f6..16d859910104 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -109,6 +109,7 @@ static struct sysfs_ops dev_sysfs_ops = { static void device_release(struct kobject *kobj) { struct device *dev = to_dev(kobj); + struct device_private *p = dev->p; if (dev->release) dev->release(dev); @@ -120,6 +121,7 @@ static void device_release(struct kobject *kobj) WARN(1, KERN_ERR "Device '%s' does not have a release() " "function, it is broken and must be fixed.\n", dev_name(dev)); + kfree(p); } static struct kobj_type device_ktype = { @@ -859,6 +861,13 @@ int device_add(struct device *dev) if (!dev) goto done; + dev->p = kzalloc(sizeof(*dev->p), GFP_KERNEL); + if (!dev->p) { + error = -ENOMEM; + goto done; + } + dev->p->device = dev; + /* * for statically allocated devices, which should all be converted * some day, we need to initialize the name. We prevent reading back diff --git a/include/linux/device.h b/include/linux/device.h index c56b154a0bf4..4cf063fea2a9 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -28,6 +28,7 @@ #define BUS_ID_SIZE 20 struct device; +struct device_private; struct device_driver; struct driver_private; struct class; @@ -373,6 +374,8 @@ struct device { struct klist_node knode_bus; struct device *parent; + struct device_private *p; + struct kobject kobj; unsigned uevent_suppress:1; const char *init_name; /* initial name of the device */ -- cgit v1.2.3 From f791b8c836307b58cbf62133a6a772ed1a92fb33 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Dec 2008 12:24:56 -0800 Subject: driver core: move klist_children into private structure Nothing outside of the driver core should ever touch klist_children, or knode_parent, so move them out of the public eye. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 6 ++++++ drivers/base/core.c | 39 +++++++++++++++++++++++++-------------- include/linux/device.h | 2 -- 3 files changed, 31 insertions(+), 16 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 62a2cb5e1780..7c4fafc314c4 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -66,14 +66,20 @@ struct class_private { /** * struct device_private - structure to hold the private to the driver core portions of the device structure. * + * @klist_children - klist containing all children of this device + * @knode_parent - node in sibling list * @device - pointer back to the struct class that this structure is * associated with. * * Nothing outside of the driver core should ever touch these fields. */ struct device_private { + struct klist klist_children; + struct klist_node knode_parent; struct device *device; }; +#define to_device_private_parent(obj) \ + container_of(obj, struct device_private, knode_parent) /* initialisation functions */ extern int devices_init(void); diff --git a/drivers/base/core.c b/drivers/base/core.c index 16d859910104..a90f56f64d6f 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -509,14 +509,16 @@ EXPORT_SYMBOL_GPL(device_schedule_callback_owner); static void klist_children_get(struct klist_node *n) { - struct device *dev = container_of(n, struct device, knode_parent); + struct device_private *p = to_device_private_parent(n); + struct device *dev = p->device; get_device(dev); } static void klist_children_put(struct klist_node *n) { - struct device *dev = container_of(n, struct device, knode_parent); + struct device_private *p = to_device_private_parent(n); + struct device *dev = p->device; put_device(dev); } @@ -540,8 +542,6 @@ void device_initialize(struct device *dev) { dev->kobj.kset = devices_kset; kobject_init(&dev->kobj, &device_ktype); - klist_init(&dev->klist_children, klist_children_get, - klist_children_put); INIT_LIST_HEAD(&dev->dma_pools); init_MUTEX(&dev->sem); spin_lock_init(&dev->devres_lock); @@ -867,6 +867,8 @@ int device_add(struct device *dev) goto done; } dev->p->device = dev; + klist_init(&dev->p->klist_children, klist_children_get, + klist_children_put); /* * for statically allocated devices, which should all be converted @@ -937,7 +939,8 @@ int device_add(struct device *dev) kobject_uevent(&dev->kobj, KOBJ_ADD); bus_attach_device(dev); if (parent) - klist_add_tail(&dev->knode_parent, &parent->klist_children); + klist_add_tail(&dev->p->knode_parent, + &parent->p->klist_children); if (dev->class) { mutex_lock(&dev->class->p->class_mutex); @@ -1051,7 +1054,7 @@ void device_del(struct device *dev) device_pm_remove(dev); dpm_sysfs_remove(dev); if (parent) - klist_del(&dev->knode_parent); + klist_del(&dev->p->knode_parent); if (MAJOR(dev->devt)) { device_remove_sys_dev_entry(dev); device_remove_file(dev, &devt_attr); @@ -1112,7 +1115,14 @@ void device_unregister(struct device *dev) static struct device *next_device(struct klist_iter *i) { struct klist_node *n = klist_next(i); - return n ? container_of(n, struct device, knode_parent) : NULL; + struct device *dev = NULL; + struct device_private *p; + + if (n) { + p = to_device_private_parent(n); + dev = p->device; + } + return dev; } /** @@ -1134,7 +1144,7 @@ int device_for_each_child(struct device *parent, void *data, struct device *child; int error = 0; - klist_iter_init(&parent->klist_children, &i); + klist_iter_init(&parent->p->klist_children, &i); while ((child = next_device(&i)) && !error) error = fn(child, data); klist_iter_exit(&i); @@ -1165,7 +1175,7 @@ struct device *device_find_child(struct device *parent, void *data, if (!parent) return NULL; - klist_iter_init(&parent->klist_children, &i); + klist_iter_init(&parent->p->klist_children, &i); while ((child = next_device(&i))) if (match(child, data) && get_device(child)) break; @@ -1578,9 +1588,10 @@ int device_move(struct device *dev, struct device *new_parent) old_parent = dev->parent; dev->parent = new_parent; if (old_parent) - klist_remove(&dev->knode_parent); + klist_remove(&dev->p->knode_parent); if (new_parent) { - klist_add_tail(&dev->knode_parent, &new_parent->klist_children); + klist_add_tail(&dev->p->knode_parent, + &new_parent->p->klist_children); set_dev_node(dev, dev_to_node(new_parent)); } @@ -1592,11 +1603,11 @@ int device_move(struct device *dev, struct device *new_parent) device_move_class_links(dev, new_parent, old_parent); if (!kobject_move(&dev->kobj, &old_parent->kobj)) { if (new_parent) - klist_remove(&dev->knode_parent); + klist_remove(&dev->p->knode_parent); dev->parent = old_parent; if (old_parent) { - klist_add_tail(&dev->knode_parent, - &old_parent->klist_children); + klist_add_tail(&dev->p->knode_parent, + &old_parent->p->klist_children); set_dev_node(dev, dev_to_node(old_parent)); } } diff --git a/include/linux/device.h b/include/linux/device.h index 4cf063fea2a9..808d808ec696 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -368,8 +368,6 @@ struct device_dma_parameters { }; struct device { - struct klist klist_children; - struct klist_node knode_parent; /* node in sibling list */ struct klist_node knode_driver; struct klist_node knode_bus; struct device *parent; -- cgit v1.2.3 From 8940b4f312dced51b45004819b776ec3aa7fcd5d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Dec 2008 12:25:49 -0800 Subject: driver core: move knode_driver into private structure Nothing outside of the driver core should ever touch knode_driver, so move it out of the public eye. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 4 ++++ drivers/base/dd.c | 13 ++++++++----- drivers/base/driver.c | 13 ++++++++++--- include/linux/device.h | 1 - 4 files changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 7c4fafc314c4..4fc5fd3984cc 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -68,6 +68,7 @@ struct class_private { * * @klist_children - klist containing all children of this device * @knode_parent - node in sibling list + * @knode_driver - node in driver list * @device - pointer back to the struct class that this structure is * associated with. * @@ -76,10 +77,13 @@ struct class_private { struct device_private { struct klist klist_children; struct klist_node knode_parent; + struct klist_node knode_driver; struct device *device; }; #define to_device_private_parent(obj) \ container_of(obj, struct device_private, knode_parent) +#define to_device_private_driver(obj) \ + container_of(obj, struct device_private, knode_driver) /* initialisation functions */ extern int devices_init(void); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 0dfd08c15921..f17c3266a0e0 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -30,7 +30,7 @@ static void driver_bound(struct device *dev) { - if (klist_node_attached(&dev->knode_driver)) { + if (klist_node_attached(&dev->p->knode_driver)) { printk(KERN_WARNING "%s: device %s already bound\n", __func__, kobject_name(&dev->kobj)); return; @@ -43,7 +43,7 @@ static void driver_bound(struct device *dev) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_BOUND_DRIVER, dev); - klist_add_tail(&dev->knode_driver, &dev->driver->p->klist_devices); + klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices); } static int driver_sysfs_add(struct device *dev) @@ -318,7 +318,7 @@ static void __device_release_driver(struct device *dev) drv->remove(dev); devres_release_all(dev); dev->driver = NULL; - klist_remove(&dev->knode_driver); + klist_remove(&dev->p->knode_driver); } } @@ -348,6 +348,7 @@ EXPORT_SYMBOL_GPL(device_release_driver); */ void driver_detach(struct device_driver *drv) { + struct device_private *dev_prv; struct device *dev; for (;;) { @@ -356,8 +357,10 @@ void driver_detach(struct device_driver *drv) spin_unlock(&drv->p->klist_devices.k_lock); break; } - dev = list_entry(drv->p->klist_devices.k_list.prev, - struct device, knode_driver.n_node); + dev_prv = list_entry(drv->p->klist_devices.k_list.prev, + struct device_private, + knode_driver.n_node); + dev = dev_prv->device; get_device(dev); spin_unlock(&drv->p->klist_devices.k_lock); diff --git a/drivers/base/driver.c b/drivers/base/driver.c index 2889ad57e48b..c51f11bb29ae 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -19,7 +19,14 @@ static struct device *next_device(struct klist_iter *i) { struct klist_node *n = klist_next(i); - return n ? container_of(n, struct device, knode_driver) : NULL; + struct device *dev = NULL; + struct device_private *dev_prv; + + if (n) { + dev_prv = to_device_private_driver(n); + dev = dev_prv->device; + } + return dev; } /** @@ -42,7 +49,7 @@ int driver_for_each_device(struct device_driver *drv, struct device *start, return -EINVAL; klist_iter_init_node(&drv->p->klist_devices, &i, - start ? &start->knode_driver : NULL); + start ? &start->p->knode_driver : NULL); while ((dev = next_device(&i)) && !error) error = fn(dev, data); klist_iter_exit(&i); @@ -76,7 +83,7 @@ struct device *driver_find_device(struct device_driver *drv, return NULL; klist_iter_init_node(&drv->p->klist_devices, &i, - (start ? &start->knode_driver : NULL)); + (start ? &start->p->knode_driver : NULL)); while ((dev = next_device(&i))) if (match(dev, data) && get_device(dev)) break; diff --git a/include/linux/device.h b/include/linux/device.h index 808d808ec696..83e241f407be 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -368,7 +368,6 @@ struct device_dma_parameters { }; struct device { - struct klist_node knode_driver; struct klist_node knode_bus; struct device *parent; -- cgit v1.2.3 From ae1b41715ee2aae356fbcca032838b71d70b855f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Dec 2008 12:26:21 -0800 Subject: driver core: move knode_bus into private structure Nothing outside of the driver core should ever touch knode_bus, so move it out of the public eye. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 4 ++++ drivers/base/bus.c | 40 +++++++++++++++++++++++++++------------- include/linux/device.h | 1 - 3 files changed, 31 insertions(+), 14 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 4fc5fd3984cc..ddc97496db4a 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -69,6 +69,7 @@ struct class_private { * @klist_children - klist containing all children of this device * @knode_parent - node in sibling list * @knode_driver - node in driver list + * @knode_bus - node in bus list * @device - pointer back to the struct class that this structure is * associated with. * @@ -78,12 +79,15 @@ struct device_private { struct klist klist_children; struct klist_node knode_parent; struct klist_node knode_driver; + struct klist_node knode_bus; struct device *device; }; #define to_device_private_parent(obj) \ container_of(obj, struct device_private, knode_parent) #define to_device_private_driver(obj) \ container_of(obj, struct device_private, knode_driver) +#define to_device_private_bus(obj) \ + container_of(obj, struct device_private, knode_bus) /* initialisation functions */ extern int devices_init(void); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 11463c00451e..dc030f1f00f1 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -253,7 +253,14 @@ static ssize_t store_drivers_probe(struct bus_type *bus, static struct device *next_device(struct klist_iter *i) { struct klist_node *n = klist_next(i); - return n ? container_of(n, struct device, knode_bus) : NULL; + struct device *dev = NULL; + struct device_private *dev_prv; + + if (n) { + dev_prv = to_device_private_bus(n); + dev = dev_prv->device; + } + return dev; } /** @@ -286,7 +293,7 @@ int bus_for_each_dev(struct bus_type *bus, struct device *start, return -EINVAL; klist_iter_init_node(&bus->p->klist_devices, &i, - (start ? &start->knode_bus : NULL)); + (start ? &start->p->knode_bus : NULL)); while ((dev = next_device(&i)) && !error) error = fn(dev, data); klist_iter_exit(&i); @@ -320,7 +327,7 @@ struct device *bus_find_device(struct bus_type *bus, return NULL; klist_iter_init_node(&bus->p->klist_devices, &i, - (start ? &start->knode_bus : NULL)); + (start ? &start->p->knode_bus : NULL)); while ((dev = next_device(&i))) if (match(dev, data) && get_device(dev)) break; @@ -507,7 +514,8 @@ void bus_attach_device(struct device *dev) ret = device_attach(dev); WARN_ON(ret < 0); if (ret >= 0) - klist_add_tail(&dev->knode_bus, &bus->p->klist_devices); + klist_add_tail(&dev->p->knode_bus, + &bus->p->klist_devices); } } @@ -528,8 +536,8 @@ void bus_remove_device(struct device *dev) sysfs_remove_link(&dev->bus->p->devices_kset->kobj, dev_name(dev)); device_remove_attrs(dev->bus, dev); - if (klist_node_attached(&dev->knode_bus)) - klist_del(&dev->knode_bus); + if (klist_node_attached(&dev->p->knode_bus)) + klist_del(&dev->p->knode_bus); pr_debug("bus: '%s': remove device %s\n", dev->bus->name, dev_name(dev)); @@ -831,14 +839,16 @@ static void bus_remove_attrs(struct bus_type *bus) static void klist_devices_get(struct klist_node *n) { - struct device *dev = container_of(n, struct device, knode_bus); + struct device_private *dev_prv = to_device_private_bus(n); + struct device *dev = dev_prv->device; get_device(dev); } static void klist_devices_put(struct klist_node *n) { - struct device *dev = container_of(n, struct device, knode_bus); + struct device_private *dev_prv = to_device_private_bus(n); + struct device *dev = dev_prv->device; put_device(dev); } @@ -995,18 +1005,20 @@ static void device_insertion_sort_klist(struct device *a, struct list_head *list { struct list_head *pos; struct klist_node *n; + struct device_private *dev_prv; struct device *b; list_for_each(pos, list) { n = container_of(pos, struct klist_node, n_node); - b = container_of(n, struct device, knode_bus); + dev_prv = to_device_private_bus(n); + b = dev_prv->device; if (compare(a, b) <= 0) { - list_move_tail(&a->knode_bus.n_node, - &b->knode_bus.n_node); + list_move_tail(&a->p->knode_bus.n_node, + &b->p->knode_bus.n_node); return; } } - list_move_tail(&a->knode_bus.n_node, list); + list_move_tail(&a->p->knode_bus.n_node, list); } void bus_sort_breadthfirst(struct bus_type *bus, @@ -1016,6 +1028,7 @@ void bus_sort_breadthfirst(struct bus_type *bus, LIST_HEAD(sorted_devices); struct list_head *pos, *tmp; struct klist_node *n; + struct device_private *dev_prv; struct device *dev; struct klist *device_klist; @@ -1024,7 +1037,8 @@ void bus_sort_breadthfirst(struct bus_type *bus, spin_lock(&device_klist->k_lock); list_for_each_safe(pos, tmp, &device_klist->k_list) { n = container_of(pos, struct klist_node, n_node); - dev = container_of(n, struct device, knode_bus); + dev_prv = to_device_private_bus(n); + dev = dev_prv->device; device_insertion_sort_klist(dev, &sorted_devices, compare); } list_splice(&sorted_devices, &device_klist->k_list); diff --git a/include/linux/device.h b/include/linux/device.h index 83e241f407be..5a64775e68e4 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -368,7 +368,6 @@ struct device_dma_parameters { }; struct device { - struct klist_node knode_bus; struct device *parent; struct device_private *p; -- cgit v1.2.3 From e0edd3c65aa5b53e20280565a7ce11675eb7ed6b Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 4 Mar 2009 11:57:20 -0800 Subject: sysfs: don't block indefinitely for unmapped files. Modify sysfs bin files so that we can remove the bin file while they are still mapped. When the kobject is removed we unmap the bin file and arrange for future accesses to the mapping to receive SIGBUS. Implementing this prevents a nasty DOS when pci devices are hot plugged and unplugged. Where if any of their resources were mmaped the kernel could not free up their pci resources or release their pci data structures. [akpm@linux-foundation.org: remove unused var] Signed-off-by: Eric W. Biederman Cc: Jesse Barnes Acked-by: Tejun Heo Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/bin.c | 184 +++++++++++++++++++++++++++++++++++++++++++++++++++---- fs/sysfs/dir.c | 1 + fs/sysfs/sysfs.h | 2 + 3 files changed, 174 insertions(+), 13 deletions(-) diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index f2c478c3424e..96cc2bf6a84e 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -21,15 +21,28 @@ #include #include #include +#include #include #include "sysfs.h" +/* + * There's one bin_buffer for each open file. + * + * filp->private_data points to bin_buffer and + * sysfs_dirent->s_bin_attr.buffers points to a the bin_buffer s + * sysfs_dirent->s_bin_attr.buffers is protected by sysfs_bin_lock + */ +static DEFINE_MUTEX(sysfs_bin_lock); + struct bin_buffer { - struct mutex mutex; - void *buffer; - int mmapped; + struct mutex mutex; + void *buffer; + int mmapped; + struct vm_operations_struct *vm_ops; + struct file *file; + struct hlist_node list; }; static int @@ -168,29 +181,148 @@ out_free: return count; } +static void bin_vma_open(struct vm_area_struct *vma) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + + if (!bb->vm_ops || !bb->vm_ops->open) + return; + + if (!sysfs_get_active_two(attr_sd)) + return; + + bb->vm_ops->open(vma); + + sysfs_put_active_two(attr_sd); +} + +static void bin_vma_close(struct vm_area_struct *vma) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + + if (!bb->vm_ops || !bb->vm_ops->close) + return; + + if (!sysfs_get_active_two(attr_sd)) + return; + + bb->vm_ops->close(vma); + + sysfs_put_active_two(attr_sd); +} + +static int bin_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + int ret; + + if (!bb->vm_ops || !bb->vm_ops->fault) + return VM_FAULT_SIGBUS; + + if (!sysfs_get_active_two(attr_sd)) + return VM_FAULT_SIGBUS; + + ret = bb->vm_ops->fault(vma, vmf); + + sysfs_put_active_two(attr_sd); + return ret; +} + +static int bin_page_mkwrite(struct vm_area_struct *vma, struct page *page) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + int ret; + + if (!bb->vm_ops || !bb->vm_ops->page_mkwrite) + return -EINVAL; + + if (!sysfs_get_active_two(attr_sd)) + return -EINVAL; + + ret = bb->vm_ops->page_mkwrite(vma, page); + + sysfs_put_active_two(attr_sd); + return ret; +} + +static int bin_access(struct vm_area_struct *vma, unsigned long addr, + void *buf, int len, int write) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + int ret; + + if (!bb->vm_ops || !bb->vm_ops->access) + return -EINVAL; + + if (!sysfs_get_active_two(attr_sd)) + return -EINVAL; + + ret = bb->vm_ops->access(vma, addr, buf, len, write); + + sysfs_put_active_two(attr_sd); + return ret; +} + +static struct vm_operations_struct bin_vm_ops = { + .open = bin_vma_open, + .close = bin_vma_close, + .fault = bin_fault, + .page_mkwrite = bin_page_mkwrite, + .access = bin_access, +}; + static int mmap(struct file *file, struct vm_area_struct *vma) { struct bin_buffer *bb = file->private_data; struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct bin_attribute *attr = attr_sd->s_bin_attr.bin_attr; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; + struct vm_operations_struct *vm_ops; int rc; mutex_lock(&bb->mutex); /* need attr_sd for attr, its parent for kobj */ + rc = -ENODEV; if (!sysfs_get_active_two(attr_sd)) - return -ENODEV; + goto out_unlock; rc = -EINVAL; - if (attr->mmap) - rc = attr->mmap(kobj, attr, vma); + if (!attr->mmap) + goto out_put; - if (rc == 0 && !bb->mmapped) - bb->mmapped = 1; - else - sysfs_put_active_two(attr_sd); + rc = attr->mmap(kobj, attr, vma); + vm_ops = vma->vm_ops; + vma->vm_ops = &bin_vm_ops; + if (rc) + goto out_put; + rc = -EINVAL; + if (bb->mmapped && bb->vm_ops != vma->vm_ops) + goto out_put; + +#ifdef CONFIG_NUMA + rc = -EINVAL; + if (vm_ops && ((vm_ops->set_policy || vm_ops->get_policy || vm_ops->migrate))) + goto out_put; +#endif + + rc = 0; + bb->mmapped = 1; + bb->vm_ops = vm_ops; +out_put: + sysfs_put_active_two(attr_sd); +out_unlock: mutex_unlock(&bb->mutex); return rc; @@ -223,8 +355,13 @@ static int open(struct inode * inode, struct file * file) goto err_out; mutex_init(&bb->mutex); + bb->file = file; file->private_data = bb; + mutex_lock(&sysfs_bin_lock); + hlist_add_head(&bb->list, &attr_sd->s_bin_attr.buffers); + mutex_unlock(&sysfs_bin_lock); + /* open succeeded, put active references */ sysfs_put_active_two(attr_sd); return 0; @@ -237,11 +374,12 @@ static int open(struct inode * inode, struct file * file) static int release(struct inode * inode, struct file * file) { - struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct bin_buffer *bb = file->private_data; - if (bb->mmapped) - sysfs_put_active_two(attr_sd); + mutex_lock(&sysfs_bin_lock); + hlist_del(&bb->list); + mutex_unlock(&sysfs_bin_lock); + kfree(bb->buffer); kfree(bb); return 0; @@ -256,6 +394,26 @@ const struct file_operations bin_fops = { .release = release, }; + +void unmap_bin_file(struct sysfs_dirent *attr_sd) +{ + struct bin_buffer *bb; + struct hlist_node *tmp; + + if (sysfs_type(attr_sd) != SYSFS_KOBJ_BIN_ATTR) + return; + + mutex_lock(&sysfs_bin_lock); + + hlist_for_each_entry(bb, tmp, &attr_sd->s_bin_attr.buffers, list) { + struct inode *inode = bb->file->f_path.dentry->d_inode; + + unmap_mapping_range(inode->i_mapping, 0, 0, 1); + } + + mutex_unlock(&sysfs_bin_lock); +} + /** * sysfs_create_bin_file - create binary file for object. * @kobj: object. diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index f13d852ab3c1..66aeb4fff0c3 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -609,6 +609,7 @@ void sysfs_addrm_finish(struct sysfs_addrm_cxt *acxt) sysfs_drop_dentry(sd); sysfs_deactivate(sd); + unmap_bin_file(sd); sysfs_put(sd); } } diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h index 9055d04e4ab0..3fa0d98481e2 100644 --- a/fs/sysfs/sysfs.h +++ b/fs/sysfs/sysfs.h @@ -28,6 +28,7 @@ struct sysfs_elem_attr { struct sysfs_elem_bin_attr { struct bin_attribute *bin_attr; + struct hlist_head buffers; }; /* @@ -164,6 +165,7 @@ int sysfs_add_file_mode(struct sysfs_dirent *dir_sd, * bin.c */ extern const struct file_operations bin_fops; +void unmap_bin_file(struct sysfs_dirent *attr_sd); /* * symlink.c -- cgit v1.2.3 From 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sun, 8 Mar 2009 23:13:32 +0800 Subject: driver core: move platform_data into platform_device This patch moves platform_data from struct device into struct platform_device, based on the two ideas: 1. Now all platform_driver is registered by platform_driver_register, which makes probe()/release()/... of platform_driver passed parameter of platform_device *, so platform driver can get platform_data from platform_device; 2. Other kind of devices do not need to use platform_data, we can decrease size of device if moving it to platform_device. Taking into consideration of thousands of files to be fixed and they can't be finished in one night(maybe it will take a long time), so we keep platform_data in device to allow two kind of cases coexist until all platform devices pass its platfrom data from platform_device->platform_data. All patches to do this kind of conversion are welcome. Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 3 +++ include/linux/device.h | 9 +++++++-- include/linux/platform_device.h | 1 + 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ec993aa6a2ca..c5ac81d22303 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -217,6 +217,7 @@ int platform_device_add_data(struct platform_device *pdev, const void *data, if (d) { memcpy(d, data, size); pdev->dev.platform_data = d; + pdev->platform_data = d; } return d ? 0 : -ENOMEM; } @@ -246,6 +247,8 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); + pdev->platform_data = pdev->dev.platform_data; + for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; diff --git a/include/linux/device.h b/include/linux/device.h index 5a64775e68e4..4bea53fe8f4c 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -385,8 +385,13 @@ struct device { struct device_driver *driver; /* which driver has allocated this device */ void *driver_data; /* data private to the driver */ - void *platform_data; /* Platform specific data, device - core doesn't touch it */ + + void *platform_data; /* We will remove platform_data + field if all platform devices + pass its platform specific data + from platform_device->platform_data, + other kind of devices should not + use platform_data. */ struct dev_pm_info power; #ifdef CONFIG_NUMA diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 76aef7be32ab..76e470a299bf 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -20,6 +20,7 @@ struct platform_device { struct device dev; u32 num_resources; struct resource * resource; + void *platform_data; struct platform_device_id *id_entry; }; -- cgit v1.2.3 From ce21c7bcd796fc4f45d48781b7e85f493cc55ee5 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 13 Mar 2009 23:06:59 +0800 Subject: driver core: fix passing platform_data We will remove platform_data field from struct device until all platform devices pass its specific data from platfom_device and all platform drivers use platform specific data passed by platform_device->platform_data. This kind of conversion will need a long time, for thousands of files is affected. To make the conversion easily, we allow platform specific data passed by struct device or struct platform_device and platform driver may use it from struct device or struct platform_device. Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index c5ac81d22303..d2198f64ad4e 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -247,7 +247,20 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); - pdev->platform_data = pdev->dev.platform_data; + /* We will remove platform_data field from struct device + * if all platform devices pass its platform specific data + * from platform_device. The conversion is going to be a + * long time, so we allow the two cases coexist to make + * this kind of fix more easily*/ + if (pdev->platform_data && pdev->dev.platform_data) { + printk(KERN_ERR + "%s: use which platform_data?\n", + dev_name(&pdev->dev)); + } else if (pdev->platform_data) { + pdev->dev.platform_data = pdev->platform_data; + } else if (pdev->dev.platform_data) { + pdev->platform_data = pdev->dev.platform_data; + } for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; -- cgit v1.2.3 From 4995f8ef9d3aac72745e12419d7fbaa8d01b1d81 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 9 Mar 2009 14:18:52 +0100 Subject: vcs: hook sysfs devices into object lifetime instead of "binding" During bootup performance tracing I noticed many occurrences of vca* device creation and removal, leading to the usual userspace uevent processing, which are, in this case, rather pointless. A simple test showing the kernel timing (not including all the work userspace has to do), gives us these numbers: $ time for i in `seq 1000`; do echo a > /dev/tty2; done real 0m1.142s user 0m0.015s sys 0m0.540s If we move the hook for the vcs* driver core devices from the tty "binding" to the vc allocation/deallocation, which is what the vcs* devices represent, we get the following numbers: $ time for i in `seq 1000`; do echo a > /dev/tty2; done real 0m0.152s user 0m0.030s sys 0m0.072s Cc: Alan Cox Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/char/vc_screen.c | 16 ++++++++-------- drivers/char/vt.c | 5 +++-- include/linux/console.h | 4 ++-- 3 files changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index 4f3b3f95fc42..d94d25c12aa8 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -479,18 +479,18 @@ static const struct file_operations vcs_fops = { static struct class *vc_class; -void vcs_make_sysfs(struct tty_struct *tty) +void vcs_make_sysfs(int index) { - device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), NULL, - "vcs%u", tty->index + 1); - device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), NULL, - "vcsa%u", tty->index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 1), NULL, + "vcs%u", index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 129), NULL, + "vcsa%u", index + 1); } -void vcs_remove_sysfs(struct tty_struct *tty) +void vcs_remove_sysfs(int index) { - device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 1)); - device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 129)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 1)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 129)); } int __init vcs_init(void) diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 7900bd63b36d..2c1d133819b5 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -778,6 +778,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ } vc->vc_kmalloced = 1; vc_init(vc, vc->vc_rows, vc->vc_cols, 1); + vcs_make_sysfs(currcons); atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, ¶m); } return 0; @@ -987,7 +988,9 @@ void vc_deallocate(unsigned int currcons) if (vc_cons_allocated(currcons)) { struct vc_data *vc = vc_cons[currcons].d; struct vt_notifier_param param = { .vc = vc }; + atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); + vcs_remove_sysfs(currcons); vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); @@ -2775,7 +2778,6 @@ static int con_open(struct tty_struct *tty, struct file *filp) tty->termios->c_iflag |= IUTF8; else tty->termios->c_iflag &= ~IUTF8; - vcs_make_sysfs(tty); release_console_sem(); return ret; } @@ -2795,7 +2797,6 @@ static void con_shutdown(struct tty_struct *tty) BUG_ON(vc == NULL); acquire_console_sem(); vc->vc_tty = NULL; - vcs_remove_sysfs(tty); release_console_sem(); tty_shutdown(tty); } diff --git a/include/linux/console.h b/include/linux/console.h index a67a90cf8268..dcca5339ceb3 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -137,8 +137,8 @@ extern void resume_console(void); int mda_console_init(void); void prom_con_init(void); -void vcs_make_sysfs(struct tty_struct *tty); -void vcs_remove_sysfs(struct tty_struct *tty); +void vcs_make_sysfs(int index); +void vcs_remove_sysfs(int index); /* Some debug stub to catch some of the obvious races in the VT code */ #if 1 -- cgit v1.2.3 From f67f129e519fa87f8ebd236b6336fe43f31ee141 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sun, 1 Mar 2009 21:10:49 +0800 Subject: Driver core: implement uevent suppress in kobject This patch implements uevent suppress in kobject and removes it from struct device, based on the following ideas: 1,Uevent sending should be one attribute of kobject, so suppressing it in kobject layer is more natural than in device layer. By this way, we can do it for other objects embedded with kobject. 2,It may save several bytes for each instance of struct device.(On my omap3(32bit ARM) based box, can save 8bytes per device object) This patch also introduces dev_set|get_uevent_suppress() helpers to set and query uevent_suppress attribute in case to help kobject as private part of struct device in future. [This version is against the latest driver-core patch set of Greg,please ignore the last version.] Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/dock.c | 2 +- drivers/base/core.c | 2 -- drivers/base/firmware_class.c | 4 ++-- drivers/i2c/i2c-core.c | 2 +- drivers/s390/cio/chsc_sch.c | 4 ++-- drivers/s390/cio/css.c | 4 ++-- drivers/s390/cio/device.c | 4 ++-- fs/partitions/check.c | 10 +++++----- include/linux/device.h | 11 ++++++++++- include/linux/kobject.h | 1 + lib/kobject_uevent.c | 7 +++++++ 11 files changed, 33 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 35094f230b1e..7af7db1ba8c4 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -977,7 +977,7 @@ static int dock_add(acpi_handle handle) sizeof(struct dock_station *)); /* we want the dock device to send uevents */ - dock_device->dev.uevent_suppress = 0; + dev_set_uevent_suppress(&dock_device->dev, 0); if (is_dock(handle)) dock_station->flags |= DOCK_IS_DOCK; diff --git a/drivers/base/core.c b/drivers/base/core.c index a90f56f64d6f..95c67ffd71da 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -136,8 +136,6 @@ static int dev_uevent_filter(struct kset *kset, struct kobject *kobj) if (ktype == &device_ktype) { struct device *dev = to_dev(kobj); - if (dev->uevent_suppress) - return 0; if (dev->bus) return 1; if (dev->class) diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 44699d9dd85c..d3a59c688fe4 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -319,7 +319,7 @@ static int fw_register_device(struct device **dev_p, const char *fw_name, f_dev->parent = device; f_dev->class = &firmware_class; dev_set_drvdata(f_dev, fw_priv); - f_dev->uevent_suppress = 1; + dev_set_uevent_suppress(f_dev, 1); retval = device_register(f_dev); if (retval) { dev_err(device, "%s: device_register failed\n", __func__); @@ -366,7 +366,7 @@ static int fw_setup_device(struct firmware *fw, struct device **dev_p, } if (uevent) - f_dev->uevent_suppress = 0; + dev_set_uevent_suppress(f_dev, 0); *dev_p = f_dev; goto out; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e7d984866de0..fbb9030b68a5 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -841,7 +841,7 @@ int i2c_attach_client(struct i2c_client *client) if (client->driver && !is_newstyle_driver(client->driver)) { client->dev.release = i2c_client_release; - client->dev.uevent_suppress = 1; + dev_set_uevent_suppress(&client->dev, 1); } else client->dev.release = i2c_client_dev_release; diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c index 0a2f2edafc03..93eca1731b81 100644 --- a/drivers/s390/cio/chsc_sch.c +++ b/drivers/s390/cio/chsc_sch.c @@ -84,8 +84,8 @@ static int chsc_subchannel_probe(struct subchannel *sch) kfree(private); } else { sch->private = private; - if (sch->dev.uevent_suppress) { - sch->dev.uevent_suppress = 0; + if (dev_get_uevent_suppress(&sch->dev)) { + dev_set_uevent_suppress(&sch->dev, 0); kobject_uevent(&sch->dev.kobj, KOBJ_ADD); } } diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 8019288bc6de..427d11d88069 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -272,7 +272,7 @@ static int css_register_subchannel(struct subchannel *sch) * the subchannel driver can decide itself when it wants to inform * userspace of its existence. */ - sch->dev.uevent_suppress = 1; + dev_set_uevent_suppress(&sch->dev, 1); css_update_ssd_info(sch); /* make it known to the system */ ret = css_sch_device_register(sch); @@ -287,7 +287,7 @@ static int css_register_subchannel(struct subchannel *sch) * a fitting driver module may be loaded based on the * modalias. */ - sch->dev.uevent_suppress = 0; + dev_set_uevent_suppress(&sch->dev, 0); kobject_uevent(&sch->dev.kobj, KOBJ_ADD); } return ret; diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 23d5752349b5..611d2e001dd5 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -981,7 +981,7 @@ io_subchannel_register(struct work_struct *work) * Now we know this subchannel will stay, we can throw * our delayed uevent. */ - sch->dev.uevent_suppress = 0; + dev_set_uevent_suppress(&sch->dev, 0); kobject_uevent(&sch->dev.kobj, KOBJ_ADD); /* make it known to the system */ ret = ccw_device_register(cdev); @@ -1243,7 +1243,7 @@ static int io_subchannel_probe(struct subchannel *sch) * the ccw_device and exit. This happens for all early * devices, e.g. the console. */ - sch->dev.uevent_suppress = 0; + dev_set_uevent_suppress(&sch->dev, 0); kobject_uevent(&sch->dev.kobj, KOBJ_ADD); cdev->dev.groups = ccwdev_attr_groups; device_initialize(&cdev->dev); diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 6d720243f5f4..38e337d51ced 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -400,7 +400,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, pdev->devt = devt; /* delay uevent until 'holders' subdir is created */ - pdev->uevent_suppress = 1; + dev_set_uevent_suppress(pdev, 1); err = device_add(pdev); if (err) goto out_put; @@ -410,7 +410,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, if (!p->holder_dir) goto out_del; - pdev->uevent_suppress = 0; + dev_set_uevent_suppress(pdev, 0); if (flags & ADDPART_FLAG_WHOLEDISK) { err = device_create_file(pdev, &dev_attr_whole_disk); if (err) @@ -422,7 +422,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, rcu_assign_pointer(ptbl->part[partno], p); /* suppress uevent if the disk supresses it */ - if (!ddev->uevent_suppress) + if (!dev_get_uevent_suppress(pdev)) kobject_uevent(&pdev->kobj, KOBJ_ADD); return p; @@ -455,7 +455,7 @@ void register_disk(struct gendisk *disk) dev_set_name(ddev, disk->disk_name); /* delay uevents, until we scanned partition table */ - ddev->uevent_suppress = 1; + dev_set_uevent_suppress(ddev, 1); if (device_add(ddev)) return; @@ -490,7 +490,7 @@ void register_disk(struct gendisk *disk) exit: /* announce disk after possible partitions are created */ - ddev->uevent_suppress = 0; + dev_set_uevent_suppress(ddev, 0); kobject_uevent(&ddev->kobj, KOBJ_ADD); /* announce possible partitions */ diff --git a/include/linux/device.h b/include/linux/device.h index 4bea53fe8f4c..914c1016dd8f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -373,7 +373,6 @@ struct device { struct device_private *p; struct kobject kobj; - unsigned uevent_suppress:1; const char *init_name; /* initial name of the device */ struct device_type *type; @@ -465,6 +464,16 @@ static inline void dev_set_drvdata(struct device *dev, void *data) dev->driver_data = data; } +static inline unsigned int dev_get_uevent_suppress(const struct device *dev) +{ + return dev->kobj.uevent_suppress; +} + +static inline void dev_set_uevent_suppress(struct device *dev, int val) +{ + dev->kobj.uevent_suppress = val; +} + static inline int device_is_registered(struct device *dev) { return dev->kobj.state_in_sysfs; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index c9c214d7bba2..58ae8e00fcdd 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -68,6 +68,7 @@ struct kobject { unsigned int state_in_sysfs:1; unsigned int state_add_uevent_sent:1; unsigned int state_remove_uevent_sent:1; + unsigned int uevent_suppress:1; }; extern int kobject_set_name(struct kobject *kobj, const char *name, ...) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 318328ddbd1c..b2181cc8e4d8 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -118,6 +118,13 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, kset = top_kobj->kset; uevent_ops = kset->uevent_ops; + /* skip the event, if uevent_suppress is set*/ + if (kobj->uevent_suppress) { + pr_debug("kobject: '%s' (%p): %s: uevent_suppress " + "caused the event to drop!\n", + kobject_name(kobj), kobj, __func__); + return 0; + } /* skip the event, if the filter returns zero. */ if (uevent_ops && uevent_ops->filter) if (!uevent_ops->filter(kset, kobj)) { -- cgit v1.2.3 From 60530afe1ee8a5532cb09d0ab5bc3f1a6495b780 Mon Sep 17 00:00:00 2001 From: Zhenwen Xu Date: Tue, 3 Mar 2009 18:36:02 +0800 Subject: Driver core: some cleanup on drivers/base/sys.c do some cleanup on drivers/base/sys.c Signed-off-by: Zhenwen Xu Signed-off-by: Greg Kroah-Hartman --- drivers/base/sys.c | 54 +++++++++++++++++++++++++++--------------------------- 1 file changed, 27 insertions(+), 27 deletions(-) diff --git a/drivers/base/sys.c b/drivers/base/sys.c index b428c8c4bc64..cbd36cf59a0f 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -30,10 +30,10 @@ static ssize_t -sysdev_show(struct kobject * kobj, struct attribute * attr, char * buffer) +sysdev_show(struct kobject *kobj, struct attribute *attr, char *buffer) { - struct sys_device * sysdev = to_sysdev(kobj); - struct sysdev_attribute * sysdev_attr = to_sysdev_attr(attr); + struct sys_device *sysdev = to_sysdev(kobj); + struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr); if (sysdev_attr->show) return sysdev_attr->show(sysdev, sysdev_attr, buffer); @@ -42,11 +42,11 @@ sysdev_show(struct kobject * kobj, struct attribute * attr, char * buffer) static ssize_t -sysdev_store(struct kobject * kobj, struct attribute * attr, - const char * buffer, size_t count) +sysdev_store(struct kobject *kobj, struct attribute *attr, + const char *buffer, size_t count) { - struct sys_device * sysdev = to_sysdev(kobj); - struct sysdev_attribute * sysdev_attr = to_sysdev_attr(attr); + struct sys_device *sysdev = to_sysdev(kobj); + struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr); if (sysdev_attr->store) return sysdev_attr->store(sysdev, sysdev_attr, buffer, count); @@ -63,13 +63,13 @@ static struct kobj_type ktype_sysdev = { }; -int sysdev_create_file(struct sys_device * s, struct sysdev_attribute * a) +int sysdev_create_file(struct sys_device *s, struct sysdev_attribute *a) { return sysfs_create_file(&s->kobj, &a->attr); } -void sysdev_remove_file(struct sys_device * s, struct sysdev_attribute * a) +void sysdev_remove_file(struct sys_device *s, struct sysdev_attribute *a) { sysfs_remove_file(&s->kobj, &a->attr); } @@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(sysdev_remove_file); static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr, char *buffer) { - struct sysdev_class * class = to_sysdev_class(kobj); + struct sysdev_class *class = to_sysdev_class(kobj); struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr); if (class_attr->show) @@ -95,8 +95,8 @@ static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr, static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr, const char *buffer, size_t count) { - struct sysdev_class * class = to_sysdev_class(kobj); - struct sysdev_class_attribute * class_attr = to_sysdev_class_attr(attr); + struct sysdev_class *class = to_sysdev_class(kobj); + struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr); if (class_attr->store) return class_attr->store(class, buffer, count); @@ -128,7 +128,7 @@ EXPORT_SYMBOL_GPL(sysdev_class_remove_file); static struct kset *system_kset; -int sysdev_class_register(struct sysdev_class * cls) +int sysdev_class_register(struct sysdev_class *cls) { pr_debug("Registering sysdev class '%s'\n", cls->name); @@ -141,7 +141,7 @@ int sysdev_class_register(struct sysdev_class * cls) return kset_register(&cls->kset); } -void sysdev_class_unregister(struct sysdev_class * cls) +void sysdev_class_unregister(struct sysdev_class *cls) { pr_debug("Unregistering sysdev class '%s'\n", kobject_name(&cls->kset.kobj)); @@ -203,8 +203,8 @@ int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv) * @cls: Class driver belongs to. * @drv: Driver. */ -void sysdev_driver_unregister(struct sysdev_class * cls, - struct sysdev_driver * drv) +void sysdev_driver_unregister(struct sysdev_class *cls, + struct sysdev_driver *drv) { mutex_lock(&sysdev_drivers_lock); list_del_init(&drv->entry); @@ -229,10 +229,10 @@ EXPORT_SYMBOL_GPL(sysdev_driver_unregister); * @sysdev: device in question * */ -int sysdev_register(struct sys_device * sysdev) +int sysdev_register(struct sys_device *sysdev) { int error; - struct sysdev_class * cls = sysdev->cls; + struct sysdev_class *cls = sysdev->cls; if (!cls) return -EINVAL; @@ -252,7 +252,7 @@ int sysdev_register(struct sys_device * sysdev) sysdev->id); if (!error) { - struct sysdev_driver * drv; + struct sysdev_driver *drv; pr_debug("Registering sys device '%s'\n", kobject_name(&sysdev->kobj)); @@ -274,9 +274,9 @@ int sysdev_register(struct sys_device * sysdev) return error; } -void sysdev_unregister(struct sys_device * sysdev) +void sysdev_unregister(struct sys_device *sysdev) { - struct sysdev_driver * drv; + struct sysdev_driver *drv; mutex_lock(&sysdev_drivers_lock); list_for_each_entry(drv, &sysdev->cls->drivers, entry) { @@ -305,19 +305,19 @@ void sysdev_unregister(struct sys_device * sysdev) */ void sysdev_shutdown(void) { - struct sysdev_class * cls; + struct sysdev_class *cls; pr_debug("Shutting Down System Devices\n"); mutex_lock(&sysdev_drivers_lock); list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) { - struct sys_device * sysdev; + struct sys_device *sysdev; pr_debug("Shutting down type '%s':\n", kobject_name(&cls->kset.kobj)); list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) { - struct sysdev_driver * drv; + struct sysdev_driver *drv; pr_debug(" %s\n", kobject_name(&sysdev->kobj)); /* Call auxillary drivers first */ @@ -364,7 +364,7 @@ static void __sysdev_resume(struct sys_device *dev) */ int sysdev_suspend(pm_message_t state) { - struct sysdev_class * cls; + struct sysdev_class *cls; struct sys_device *sysdev, *err_dev; struct sysdev_driver *drv, *err_drv; int ret; @@ -442,12 +442,12 @@ EXPORT_SYMBOL_GPL(sysdev_suspend); */ int sysdev_resume(void) { - struct sysdev_class * cls; + struct sysdev_class *cls; pr_debug("Resuming System Devices\n"); list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) { - struct sys_device * sysdev; + struct sys_device *sysdev; pr_debug("Resuming type '%s':\n", kobject_name(&cls->kset.kobj)); -- cgit v1.2.3 From ffa6a7054d172a2f57248dff2de600ca795c5656 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 4 Mar 2009 12:44:00 +0100 Subject: Driver core: Fix device_move() vs. dpm list ordering, v2 dpm_list currently relies on the fact that child devices will be registered after their parents to get a correct suspend order. Using device_move() however destroys this assumption, as an already registered device may be moved under a newly registered one. This patch adds a new argument to device_move(), allowing callers to specify how dpm_list should be adapted. Signed-off-by: Cornelia Huck Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 19 ++++++++++++++++++- drivers/base/power/main.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ drivers/base/power/power.h | 8 ++++++++ drivers/s390/cio/device.c | 9 +++++---- include/linux/device.h | 3 ++- include/linux/pm.h | 11 +++++++++++ net/bluetooth/hci_sysfs.c | 2 +- net/bluetooth/rfcomm/tty.c | 5 +++-- 8 files changed, 92 insertions(+), 9 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 95c67ffd71da..e73c92d13a23 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1561,8 +1561,10 @@ out: * device_move - moves a device to a new parent * @dev: the pointer to the struct device to be moved * @new_parent: the new parent of the device (can by NULL) + * @dpm_order: how to reorder the dpm_list */ -int device_move(struct device *dev, struct device *new_parent) +int device_move(struct device *dev, struct device *new_parent, + enum dpm_order dpm_order) { int error; struct device *old_parent; @@ -1572,6 +1574,7 @@ int device_move(struct device *dev, struct device *new_parent) if (!dev) return -EINVAL; + device_pm_lock(); new_parent = get_device(new_parent); new_parent_kobj = get_device_parent(dev, new_parent); @@ -1613,9 +1616,23 @@ int device_move(struct device *dev, struct device *new_parent) put_device(new_parent); goto out; } + switch (dpm_order) { + case DPM_ORDER_NONE: + break; + case DPM_ORDER_DEV_AFTER_PARENT: + device_pm_move_after(dev, new_parent); + break; + case DPM_ORDER_PARENT_BEFORE_DEV: + device_pm_move_before(new_parent, dev); + break; + case DPM_ORDER_DEV_LAST: + device_pm_move_last(dev); + break; + } out_put: put_device(old_parent); out: + device_pm_unlock(); put_device(dev); return error; } diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 2d14f4ae6c01..e255341682c8 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -106,6 +106,50 @@ void device_pm_remove(struct device *dev) mutex_unlock(&dpm_list_mtx); } +/** + * device_pm_move_before - move device in dpm_list + * @deva: Device to move in dpm_list + * @devb: Device @deva should come before + */ +void device_pm_move_before(struct device *deva, struct device *devb) +{ + pr_debug("PM: Moving %s:%s before %s:%s\n", + deva->bus ? deva->bus->name : "No Bus", + kobject_name(&deva->kobj), + devb->bus ? devb->bus->name : "No Bus", + kobject_name(&devb->kobj)); + /* Delete deva from dpm_list and reinsert before devb. */ + list_move_tail(&deva->power.entry, &devb->power.entry); +} + +/** + * device_pm_move_after - move device in dpm_list + * @deva: Device to move in dpm_list + * @devb: Device @deva should come after + */ +void device_pm_move_after(struct device *deva, struct device *devb) +{ + pr_debug("PM: Moving %s:%s after %s:%s\n", + deva->bus ? deva->bus->name : "No Bus", + kobject_name(&deva->kobj), + devb->bus ? devb->bus->name : "No Bus", + kobject_name(&devb->kobj)); + /* Delete deva from dpm_list and reinsert after devb. */ + list_move(&deva->power.entry, &devb->power.entry); +} + +/** + * device_pm_move_last - move device to end of dpm_list + * @dev: Device to move in dpm_list + */ +void device_pm_move_last(struct device *dev) +{ + pr_debug("PM: Moving %s:%s to end of list\n", + dev->bus ? dev->bus->name : "No Bus", + kobject_name(&dev->kobj)); + list_move_tail(&dev->power.entry, &dpm_list); +} + /** * pm_op - execute the PM operation appropiate for given PM event * @dev: Device. diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 41f51fae042f..c7cb4fc3735c 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -18,11 +18,19 @@ static inline struct device *to_device(struct list_head *entry) extern void device_pm_add(struct device *); extern void device_pm_remove(struct device *); +extern void device_pm_move_before(struct device *, struct device *); +extern void device_pm_move_after(struct device *, struct device *); +extern void device_pm_move_last(struct device *); #else /* CONFIG_PM_SLEEP */ static inline void device_pm_add(struct device *dev) {} static inline void device_pm_remove(struct device *dev) {} +static inline void device_pm_move_before(struct device *deva, + struct device *devb) {} +static inline void device_pm_move_after(struct device *deva, + struct device *devb) {} +static inline void device_pm_move_last(struct device *dev) {} #endif diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 611d2e001dd5..e28f8ae53453 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -799,7 +799,7 @@ static void sch_attach_disconnected_device(struct subchannel *sch, return; other_sch = to_subchannel(cdev->dev.parent); /* Note: device_move() changes cdev->dev.parent */ - ret = device_move(&cdev->dev, &sch->dev); + ret = device_move(&cdev->dev, &sch->dev, DPM_ORDER_PARENT_BEFORE_DEV); if (ret) { CIO_MSG_EVENT(0, "Moving disconnected device 0.%x.%04x failed " "(ret=%d)!\n", cdev->private->dev_id.ssid, @@ -830,7 +830,7 @@ static void sch_attach_orphaned_device(struct subchannel *sch, * Try to move the ccw device to its new subchannel. * Note: device_move() changes cdev->dev.parent */ - ret = device_move(&cdev->dev, &sch->dev); + ret = device_move(&cdev->dev, &sch->dev, DPM_ORDER_PARENT_BEFORE_DEV); if (ret) { CIO_MSG_EVENT(0, "Moving device 0.%x.%04x from orphanage " "failed (ret=%d)!\n", @@ -897,7 +897,8 @@ void ccw_device_move_to_orphanage(struct work_struct *work) * ccw device can take its place on the subchannel. * Note: device_move() changes cdev->dev.parent */ - ret = device_move(&cdev->dev, &css->pseudo_subchannel->dev); + ret = device_move(&cdev->dev, &css->pseudo_subchannel->dev, + DPM_ORDER_NONE); if (ret) { CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to orphanage failed " "(ret=%d)!\n", cdev->private->dev_id.ssid, @@ -1129,7 +1130,7 @@ static void ccw_device_move_to_sch(struct work_struct *work) * Try to move the ccw device to its new subchannel. * Note: device_move() changes cdev->dev.parent */ - rc = device_move(&cdev->dev, &sch->dev); + rc = device_move(&cdev->dev, &sch->dev, DPM_ORDER_PARENT_BEFORE_DEV); mutex_unlock(&sch->reg_mutex); if (rc) { CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to subchannel " diff --git a/include/linux/device.h b/include/linux/device.h index 914c1016dd8f..f98d0cfb4f81 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -494,7 +494,8 @@ extern int device_for_each_child(struct device *dev, void *data, extern struct device *device_find_child(struct device *dev, void *data, int (*match)(struct device *dev, void *data)); extern int device_rename(struct device *dev, char *new_name); -extern int device_move(struct device *dev, struct device *new_parent); +extern int device_move(struct device *dev, struct device *new_parent, + enum dpm_order dpm_order); /* * Root device objects for grouping under /sys/devices diff --git a/include/linux/pm.h b/include/linux/pm.h index 24ba5f67b3a3..1d4e2d289821 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -400,6 +400,9 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); #else /* !CONFIG_PM_SLEEP */ +#define device_pm_lock() do {} while (0) +#define device_pm_unlock() do {} while (0) + static inline int device_suspend(pm_message_t state) { return 0; @@ -409,6 +412,14 @@ static inline int device_suspend(pm_message_t state) #endif /* !CONFIG_PM_SLEEP */ +/* How to reorder dpm_list after device_move() */ +enum dpm_order { + DPM_ORDER_NONE, + DPM_ORDER_DEV_AFTER_PARENT, + DPM_ORDER_PARENT_BEFORE_DEV, + DPM_ORDER_DEV_LAST, +}; + /* * Global Power Management flags * Used to keep APM and ACPI from both being active diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index 1a1f916be44e..ed82796d4a0f 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -140,7 +140,7 @@ static void del_conn(struct work_struct *work) dev = device_find_child(&conn->dev, NULL, __match_tty); if (!dev) break; - device_move(dev, NULL); + device_move(dev, NULL, DPM_ORDER_DEV_LAST); put_device(dev); } diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index d030c69cb5a3..abdc703a11d2 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -731,7 +731,8 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp) remove_wait_queue(&dev->wait, &wait); if (err == 0) - device_move(dev->tty_dev, rfcomm_get_device(dev)); + device_move(dev->tty_dev, rfcomm_get_device(dev), + DPM_ORDER_DEV_AFTER_PARENT); rfcomm_tty_copy_pending(dev); @@ -751,7 +752,7 @@ static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) if (atomic_dec_and_test(&dev->opened)) { if (dev->tty_dev->parent) - device_move(dev->tty_dev, NULL); + device_move(dev->tty_dev, NULL, DPM_ORDER_DEV_LAST); /* Close DLC and dettach TTY */ rfcomm_dlc_close(dev->dlc, 0); -- cgit v1.2.3 From 669420644c79c207f83fdf9105ae782867e2991f Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Fri, 13 Mar 2009 12:07:36 -0600 Subject: sysfs: only allow one scheduled removal callback per kobj The only way for a sysfs attribute to remove itself (without deadlock) is to use the sysfs_schedule_callback() interface. Vegard Nossum discovered that a poorly written sysfs ->store callback can repeatedly schedule remove callbacks on the same device over and over, e.g. $ while true ; do echo 1 > /sys/devices/.../remove ; done If the 'remove' attribute uses the sysfs_schedule_callback API and also does not protect itself from concurrent accesses, its callback handler will be called multiple times, and will eventually attempt to perform operations on a freed kobject, leading to many problems. Instead of requiring all callers of sysfs_schedule_callback to implement their own synchronization, provide the protection in the infrastructure. Now, sysfs_schedule_callback will only allow one scheduled callback per kobject. On subsequent calls with the same kobject, return -EAGAIN. This is a short term fix. The long term fix is to allow sysfs attributes to remove themselves directly, without any of this callback hokey pokey. [cornelia.huck@de.ibm.com: s390 ccwgroup bits] Reported-by: vegard.nossum@gmail.com Signed-off-by: Alex Chiang Acked-by: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- drivers/s390/cio/ccwgroup.c | 5 +++-- fs/sysfs/file.c | 26 +++++++++++++++++++++++--- 2 files changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index 918e6fce2573..b91c1719b075 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -104,8 +104,9 @@ ccwgroup_ungroup_store(struct device *dev, struct device_attribute *attr, const rc = device_schedule_callback(dev, ccwgroup_ungroup_callback); out: if (rc) { - /* Release onoff "lock" when ungrouping failed. */ - atomic_set(&gdev->onoff, 0); + if (rc != -EAGAIN) + /* Release onoff "lock" when ungrouping failed. */ + atomic_set(&gdev->onoff, 0); return rc; } return count; diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 1f4a3f877262..289c43a47263 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -659,13 +659,16 @@ void sysfs_remove_file_from_group(struct kobject *kobj, EXPORT_SYMBOL_GPL(sysfs_remove_file_from_group); struct sysfs_schedule_callback_struct { - struct kobject *kobj; + struct list_head workq_list; + struct kobject *kobj; void (*func)(void *); void *data; struct module *owner; struct work_struct work; }; +static DEFINE_MUTEX(sysfs_workq_mutex); +static LIST_HEAD(sysfs_workq); static void sysfs_schedule_callback_work(struct work_struct *work) { struct sysfs_schedule_callback_struct *ss = container_of(work, @@ -674,6 +677,9 @@ static void sysfs_schedule_callback_work(struct work_struct *work) (ss->func)(ss->data); kobject_put(ss->kobj); module_put(ss->owner); + mutex_lock(&sysfs_workq_mutex); + list_del(&ss->workq_list); + mutex_unlock(&sysfs_workq_mutex); kfree(ss); } @@ -695,15 +701,25 @@ static void sysfs_schedule_callback_work(struct work_struct *work) * until @func returns. * * Returns 0 if the request was submitted, -ENOMEM if storage could not - * be allocated, -ENODEV if a reference to @owner isn't available. + * be allocated, -ENODEV if a reference to @owner isn't available, + * -EAGAIN if a callback has already been scheduled for @kobj. */ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), void *data, struct module *owner) { - struct sysfs_schedule_callback_struct *ss; + struct sysfs_schedule_callback_struct *ss, *tmp; if (!try_module_get(owner)) return -ENODEV; + + mutex_lock(&sysfs_workq_mutex); + list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list) + if (ss->kobj == kobj) { + mutex_unlock(&sysfs_workq_mutex); + return -EAGAIN; + } + mutex_unlock(&sysfs_workq_mutex); + ss = kmalloc(sizeof(*ss), GFP_KERNEL); if (!ss) { module_put(owner); @@ -715,6 +731,10 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), ss->data = data; ss->owner = owner; INIT_WORK(&ss->work, sysfs_schedule_callback_work); + INIT_LIST_HEAD(&ss->workq_list); + mutex_lock(&sysfs_workq_mutex); + list_add_tail(&ss->workq_list, &sysfs_workq); + mutex_unlock(&sysfs_workq_mutex); schedule_work(&ss->work); return 0; } -- cgit v1.2.3 From f520360d93cdc37de5d972dac4bf3bdef6a7f6a7 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 19 Mar 2009 09:09:05 -0700 Subject: kobject: don't block for each kobject_uevent Right now, the kobject_uevent code blocks for each uevent that's being generated, due to using (for hystoric reasons) UHM_WAIT_EXEC as flag to call_usermode_helper(). Specifically, the effect is that each uevent that is being sent causes the code to wake up keventd, then block until keventd has processed the work. Needless to say, this happens many times during the system boot. This patches changes that to UHN_NO_WAIT (brilliant name for a constant btw) so that we only schedule the work to fire the uevent message, but do not wait for keventd to process the work. This removes one of the bottlenecks during boot; each one of them is only a small effect, but the sum of them does add up. [Note, distros that need this are broken, they should be setting CONFIG_UEVENT_HELPER_PATH to "", that way this code path will never be excuted at all -- gregkh] Signed-off-by: Arjan van de Ven Signed-off-by: Greg Kroah-Hartman --- lib/kobject_uevent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index b2181cc8e4d8..e68e743bd861 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -255,7 +255,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, goto exit; retval = call_usermodehelper(argv[0], argv, - env->envp, UMH_WAIT_EXEC); + env->envp, UMH_NO_WAIT); } exit: -- cgit v1.2.3 From 095160aee954688a9bad225952c4bee546541e19 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 23 Mar 2009 01:41:27 +0000 Subject: sysfs: fix some bin_vm_ops errors Commit 86c9508eb1c0ce5aa07b5cf1d36b60c54efc3d7a "sysfs: don't block indefinitely for unmapped files" in linux-next crashes the PowerMac G5 when X starts up. It's caught out by the way powerpc's pci_mmap of legacy_mem uses shmem_zero_setup(), substituting a new vma->vm_file whose private_data no longer points to the bin_buffer (substitution done because some versions of X crash if that mmap fails). The fix to this is straightforward: the original vm_file is fput() in that case, so this mmap won't block sysfs at all, so just don't switch over to bin_vm_ops if vm_file has changed. But more fixes made before realizing that was the problem:- It should not be an error if bin_page_mkwrite() finds no underlying page_mkwrite(). Check that a file already mmap'ed has the same underlying vm_ops _before_ pointing vma->vm_ops at bin_vm_ops. If the file being mmap'ed is a shmem/tmpfs file, don't fail the mmap on CONFIG_NUMA=y, just because that has a set_policy and get_policy: provide bin_set_policy, bin_get_policy and bin_migrate. Signed-off-by: Hugh Dickins Acked-by: Eric Biederman Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/bin.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 79 insertions(+), 10 deletions(-) diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 96cc2bf6a84e..07703d3ff4a1 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -241,9 +241,12 @@ static int bin_page_mkwrite(struct vm_area_struct *vma, struct page *page) struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; int ret; - if (!bb->vm_ops || !bb->vm_ops->page_mkwrite) + if (!bb->vm_ops) return -EINVAL; + if (!bb->vm_ops->page_mkwrite) + return 0; + if (!sysfs_get_active_two(attr_sd)) return -EINVAL; @@ -273,12 +276,78 @@ static int bin_access(struct vm_area_struct *vma, unsigned long addr, return ret; } +#ifdef CONFIG_NUMA +static int bin_set_policy(struct vm_area_struct *vma, struct mempolicy *new) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + int ret; + + if (!bb->vm_ops || !bb->vm_ops->set_policy) + return 0; + + if (!sysfs_get_active_two(attr_sd)) + return -EINVAL; + + ret = bb->vm_ops->set_policy(vma, new); + + sysfs_put_active_two(attr_sd); + return ret; +} + +static struct mempolicy *bin_get_policy(struct vm_area_struct *vma, + unsigned long addr) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + struct mempolicy *pol; + + if (!bb->vm_ops || !bb->vm_ops->get_policy) + return vma->vm_policy; + + if (!sysfs_get_active_two(attr_sd)) + return vma->vm_policy; + + pol = bb->vm_ops->get_policy(vma, addr); + + sysfs_put_active_two(attr_sd); + return pol; +} + +static int bin_migrate(struct vm_area_struct *vma, const nodemask_t *from, + const nodemask_t *to, unsigned long flags) +{ + struct file *file = vma->vm_file; + struct bin_buffer *bb = file->private_data; + struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; + int ret; + + if (!bb->vm_ops || !bb->vm_ops->migrate) + return 0; + + if (!sysfs_get_active_two(attr_sd)) + return 0; + + ret = bb->vm_ops->migrate(vma, from, to, flags); + + sysfs_put_active_two(attr_sd); + return ret; +} +#endif + static struct vm_operations_struct bin_vm_ops = { .open = bin_vma_open, .close = bin_vma_close, .fault = bin_fault, .page_mkwrite = bin_page_mkwrite, .access = bin_access, +#ifdef CONFIG_NUMA + .set_policy = bin_set_policy, + .get_policy = bin_get_policy, + .migrate = bin_migrate, +#endif }; static int mmap(struct file *file, struct vm_area_struct *vma) @@ -287,7 +356,6 @@ static int mmap(struct file *file, struct vm_area_struct *vma) struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct bin_attribute *attr = attr_sd->s_bin_attr.bin_attr; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; - struct vm_operations_struct *vm_ops; int rc; mutex_lock(&bb->mutex); @@ -302,24 +370,25 @@ static int mmap(struct file *file, struct vm_area_struct *vma) goto out_put; rc = attr->mmap(kobj, attr, vma); - vm_ops = vma->vm_ops; - vma->vm_ops = &bin_vm_ops; if (rc) goto out_put; - rc = -EINVAL; - if (bb->mmapped && bb->vm_ops != vma->vm_ops) + /* + * PowerPC's pci_mmap of legacy_mem uses shmem_zero_setup() + * to satisfy versions of X which crash if the mmap fails: that + * substitutes a new vm_file, and we don't then want bin_vm_ops. + */ + if (vma->vm_file != file) goto out_put; -#ifdef CONFIG_NUMA rc = -EINVAL; - if (vm_ops && ((vm_ops->set_policy || vm_ops->get_policy || vm_ops->migrate))) + if (bb->mmapped && bb->vm_ops != vma->vm_ops) goto out_put; -#endif rc = 0; bb->mmapped = 1; - bb->vm_ops = vm_ops; + bb->vm_ops = vma->vm_ops; + vma->vm_ops = &bin_vm_ops; out_put: sysfs_put_active_two(attr_sd); out_unlock: -- cgit v1.2.3 From e9d376f0fa66bd630fe27403669c6ae6c22a868f Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 5 Feb 2009 11:51:38 -0500 Subject: dynamic debug: combine dprintk and dynamic printk This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 5 - include/asm-generic/vmlinux.lds.h | 15 +- include/linux/device.h | 2 +- include/linux/dynamic_debug.h | 88 +++++ include/linux/dynamic_printk.h | 93 ----- include/linux/kernel.h | 4 +- kernel/module.c | 25 +- lib/Kconfig.debug | 2 +- lib/Makefile | 2 +- lib/dynamic_debug.c | 756 ++++++++++++++++++++++++++++++++++++ lib/dynamic_printk.c | 414 -------------------- net/netfilter/nf_conntrack_pptp.c | 2 +- scripts/Makefile.lib | 2 +- 13 files changed, 867 insertions(+), 543 deletions(-) create mode 100644 include/linux/dynamic_debug.h delete mode 100644 include/linux/dynamic_printk.h create mode 100644 lib/dynamic_debug.c delete mode 100644 lib/dynamic_printk.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 54f21a5c262b..3a1aa8a4affc 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1816,11 +1816,6 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). - dynamic_printk Enables pr_debug()/dev_dbg() calls if - CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. - These can also be switched on/off via - /dynamic_printk/modules - print-fatal-signals= [KNL] debug: print fatal signals print-fatal-signals=1: print segfault info to diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index c61fab1dd2f8..aca40b93bd28 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -80,6 +80,11 @@ VMLINUX_SYMBOL(__start___tracepoints) = .; \ *(__tracepoints) \ VMLINUX_SYMBOL(__stop___tracepoints) = .; \ + /* implement dynamic printk debug */ \ + . = ALIGN(8); \ + VMLINUX_SYMBOL(__start___verbose) = .; \ + *(__verbose) \ + VMLINUX_SYMBOL(__stop___verbose) = .; \ LIKELY_PROFILE() \ BRANCH_PROFILE() @@ -309,15 +314,7 @@ CPU_DISCARD(init.data) \ CPU_DISCARD(init.rodata) \ MEM_DISCARD(init.data) \ - MEM_DISCARD(init.rodata) \ - /* implement dynamic printk debug */ \ - VMLINUX_SYMBOL(__start___verbose_strings) = .; \ - *(__verbose_strings) \ - VMLINUX_SYMBOL(__stop___verbose_strings) = .; \ - . = ALIGN(8); \ - VMLINUX_SYMBOL(__start___verbose) = .; \ - *(__verbose) \ - VMLINUX_SYMBOL(__stop___verbose) = .; + MEM_DISCARD(init.rodata) #define INIT_TEXT \ *(.init.text) \ diff --git a/include/linux/device.h b/include/linux/device.h index f98d0cfb4f81..2918c0e8fdfd 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -582,7 +582,7 @@ extern const char *dev_driver_string(const struct device *dev); #if defined(DEBUG) #define dev_dbg(dev, format, arg...) \ dev_printk(KERN_DEBUG , dev , format , ## arg) -#elif defined(CONFIG_DYNAMIC_PRINTK_DEBUG) +#elif defined(CONFIG_DYNAMIC_DEBUG) #define dev_dbg(dev, format, ...) do { \ dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ } while (0) diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h new file mode 100644 index 000000000000..07781aaa1164 --- /dev/null +++ b/include/linux/dynamic_debug.h @@ -0,0 +1,88 @@ +#ifndef _DYNAMIC_DEBUG_H +#define _DYNAMIC_DEBUG_H + +/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which + * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They + * use independent hash functions, to reduce the chance of false positives. + */ +extern long long dynamic_debug_enabled; +extern long long dynamic_debug_enabled2; + +/* + * An instance of this structure is created in a special + * ELF section at every dynamic debug callsite. At runtime, + * the special section is treated as an array of these. + */ +struct _ddebug { + /* + * These fields are used to drive the user interface + * for selecting and displaying debug callsites. + */ + const char *modname; + const char *function; + const char *filename; + const char *format; + char primary_hash; + char secondary_hash; + unsigned int lineno:24; + /* + * The flags field controls the behaviour at the callsite. + * The bits here are changed dynamically when the user + * writes commands to /dynamic_debug/ddebug + */ +#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */ +#define _DPRINTK_FLAGS_DEFAULT 0 + unsigned int flags:8; +} __attribute__((aligned(8))); + + +int ddebug_add_module(struct _ddebug *tab, unsigned int n, + const char *modname); + +#if defined(CONFIG_DYNAMIC_DEBUG) +extern int ddebug_remove_module(char *mod_name); + +#define __dynamic_dbg_enabled(dd) ({ \ + int __ret = 0; \ + if (unlikely((dynamic_debug_enabled & (1LL << DEBUG_HASH)) && \ + (dynamic_debug_enabled2 & (1LL << DEBUG_HASH2)))) \ + if (unlikely(dd.flags)) \ + __ret = 1; \ + __ret; }) + +#define dynamic_pr_debug(fmt, ...) do { \ + static struct _ddebug descriptor \ + __used \ + __attribute__((section("__verbose"), aligned(8))) = \ + { KBUILD_MODNAME, __func__, __FILE__, fmt, DEBUG_HASH, \ + DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ + if (__dynamic_dbg_enabled(descriptor)) \ + printk(KERN_DEBUG KBUILD_MODNAME ":" fmt, \ + ##__VA_ARGS__); \ + } while (0) + + +#define dynamic_dev_dbg(dev, fmt, ...) do { \ + static struct _ddebug descriptor \ + __used \ + __attribute__((section("__verbose"), aligned(8))) = \ + { KBUILD_MODNAME, __func__, __FILE__, fmt, DEBUG_HASH, \ + DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ + if (__dynamic_dbg_enabled(descriptor)) \ + dev_printk(KERN_DEBUG, dev, \ + KBUILD_MODNAME ": " fmt, \ + ##__VA_ARGS__); \ + } while (0) + +#else + +static inline int ddebug_remove_module(char *mod) +{ + return 0; +} + +#define dynamic_pr_debug(fmt, ...) do { } while (0) +#define dynamic_dev_dbg(dev, format, ...) do { } while (0) +#endif + +#endif diff --git a/include/linux/dynamic_printk.h b/include/linux/dynamic_printk.h deleted file mode 100644 index 2d528d009074..000000000000 --- a/include/linux/dynamic_printk.h +++ /dev/null @@ -1,93 +0,0 @@ -#ifndef _DYNAMIC_PRINTK_H -#define _DYNAMIC_PRINTK_H - -#define DYNAMIC_DEBUG_HASH_BITS 6 -#define DEBUG_HASH_TABLE_SIZE (1 << DYNAMIC_DEBUG_HASH_BITS) - -#define TYPE_BOOLEAN 1 - -#define DYNAMIC_ENABLED_ALL 0 -#define DYNAMIC_ENABLED_NONE 1 -#define DYNAMIC_ENABLED_SOME 2 - -extern int dynamic_enabled; - -/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which - * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They - * use independent hash functions, to reduce the chance of false positives. - */ -extern long long dynamic_printk_enabled; -extern long long dynamic_printk_enabled2; - -struct mod_debug { - char *modname; - char *logical_modname; - char *flag_names; - int type; - int hash; - int hash2; -} __attribute__((aligned(8))); - -int register_dynamic_debug_module(char *mod_name, int type, char *share_name, - char *flags, int hash, int hash2); - -#if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) -extern int unregister_dynamic_debug_module(char *mod_name); -extern int __dynamic_dbg_enabled_helper(char *modname, int type, - int value, int hash); - -#define __dynamic_dbg_enabled(module, type, value, level, hash) ({ \ - int __ret = 0; \ - if (unlikely((dynamic_printk_enabled & (1LL << DEBUG_HASH)) && \ - (dynamic_printk_enabled2 & (1LL << DEBUG_HASH2)))) \ - __ret = __dynamic_dbg_enabled_helper(module, type, \ - value, hash);\ - __ret; }) - -#define dynamic_pr_debug(fmt, ...) do { \ - static char mod_name[] \ - __attribute__((section("__verbose_strings"))) \ - = KBUILD_MODNAME; \ - static struct mod_debug descriptor \ - __used \ - __attribute__((section("__verbose"), aligned(8))) = \ - { mod_name, mod_name, NULL, TYPE_BOOLEAN, DEBUG_HASH, DEBUG_HASH2 };\ - if (__dynamic_dbg_enabled(KBUILD_MODNAME, TYPE_BOOLEAN, \ - 0, 0, DEBUG_HASH)) \ - printk(KERN_DEBUG KBUILD_MODNAME ":" fmt, \ - ##__VA_ARGS__); \ - } while (0) - -#define dynamic_dev_dbg(dev, format, ...) do { \ - static char mod_name[] \ - __attribute__((section("__verbose_strings"))) \ - = KBUILD_MODNAME; \ - static struct mod_debug descriptor \ - __used \ - __attribute__((section("__verbose"), aligned(8))) = \ - { mod_name, mod_name, NULL, TYPE_BOOLEAN, DEBUG_HASH, DEBUG_HASH2 };\ - if (__dynamic_dbg_enabled(KBUILD_MODNAME, TYPE_BOOLEAN, \ - 0, 0, DEBUG_HASH)) \ - dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " format, \ - ##__VA_ARGS__); \ - } while (0) - -#else - -static inline int unregister_dynamic_debug_module(const char *mod_name) -{ - return 0; -} -static inline int __dynamic_dbg_enabled_helper(char *modname, int type, - int value, int hash) -{ - return 0; -} - -#define __dynamic_dbg_enabled(module, type, value, level, hash) ({ 0; }) -#define dynamic_pr_debug(fmt, ...) do { } while (0) -#define dynamic_dev_dbg(dev, format, ...) do { } while (0) -#endif - -#endif diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 7fa371898e3e..b5496ecbec71 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include @@ -358,7 +358,7 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #if defined(DEBUG) #define pr_debug(fmt, ...) \ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#elif defined(CONFIG_DYNAMIC_PRINTK_DEBUG) +#elif defined(CONFIG_DYNAMIC_DEBUG) #define pr_debug(fmt, ...) do { \ dynamic_pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \ } while (0) diff --git a/kernel/module.c b/kernel/module.c index 1196f5d11700..77672233387f 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -822,7 +822,7 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user, mutex_lock(&module_mutex); /* Store the name of the last unloaded module for diagnostic purposes */ strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module)); - unregister_dynamic_debug_module(mod->name); + ddebug_remove_module(mod->name); free_module(mod); out: @@ -1827,19 +1827,13 @@ static inline void add_kallsyms(struct module *mod, } #endif /* CONFIG_KALLSYMS */ -static void dynamic_printk_setup(struct mod_debug *debug, unsigned int num) +static void dynamic_debug_setup(struct _ddebug *debug, unsigned int num) { -#ifdef CONFIG_DYNAMIC_PRINTK_DEBUG - unsigned int i; - - for (i = 0; i < num; i++) { - register_dynamic_debug_module(debug[i].modname, - debug[i].type, - debug[i].logical_modname, - debug[i].flag_names, - debug[i].hash, debug[i].hash2); - } -#endif /* CONFIG_DYNAMIC_PRINTK_DEBUG */ +#ifdef CONFIG_DYNAMIC_DEBUG + if (ddebug_add_module(debug, num, debug->modname)) + printk(KERN_ERR "dynamic debug error adding module: %s\n", + debug->modname); +#endif } static void *module_alloc_update_bounds(unsigned long size) @@ -2213,12 +2207,13 @@ static noinline struct module *load_module(void __user *umod, add_kallsyms(mod, sechdrs, symindex, strindex, secstrings); if (!mod->taints) { - struct mod_debug *debug; + struct _ddebug *debug; unsigned int num_debug; debug = section_objs(hdr, sechdrs, secstrings, "__verbose", sizeof(*debug), &num_debug); - dynamic_printk_setup(debug, num_debug); + if (debug) + dynamic_debug_setup(debug, num_debug); } /* sechdrs[0].sh_size is always zero */ diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1bcf9cd4baa0..0dd1c04c7323 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -847,7 +847,7 @@ config BUILD_DOCSRC Say N if you are unsure. -config DYNAMIC_PRINTK_DEBUG +config DYNAMIC_DEBUG bool "Enable dynamic printk() call support" default n depends on PRINTK diff --git a/lib/Makefile b/lib/Makefile index 32b0e64ded27..8633d6be9d21 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -82,7 +82,7 @@ obj-$(CONFIG_HAVE_LMB) += lmb.o obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o -obj-$(CONFIG_DYNAMIC_PRINTK_DEBUG) += dynamic_printk.o +obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o hostprogs-y := gen_crc32table clean-files := crc32table.h diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c new file mode 100644 index 000000000000..9e123ae326bc --- /dev/null +++ b/lib/dynamic_debug.c @@ -0,0 +1,756 @@ +/* + * lib/dynamic_debug.c + * + * make pr_debug()/dev_dbg() calls runtime configurable based upon their + * source module. + * + * Copyright (C) 2008 Jason Baron + * By Greg Banks + * Copyright (c) 2008 Silicon Graphics Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern struct _ddebug __start___verbose[]; +extern struct _ddebug __stop___verbose[]; + +/* dynamic_debug_enabled, and dynamic_debug_enabled2 are bitmasks in which + * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They + * use independent hash functions, to reduce the chance of false positives. + */ +long long dynamic_debug_enabled; +EXPORT_SYMBOL_GPL(dynamic_debug_enabled); +long long dynamic_debug_enabled2; +EXPORT_SYMBOL_GPL(dynamic_debug_enabled2); + +struct ddebug_table { + struct list_head link; + char *mod_name; + unsigned int num_ddebugs; + unsigned int num_enabled; + struct _ddebug *ddebugs; +}; + +struct ddebug_query { + const char *filename; + const char *module; + const char *function; + const char *format; + unsigned int first_lineno, last_lineno; +}; + +struct ddebug_iter { + struct ddebug_table *table; + unsigned int idx; +}; + +static DEFINE_MUTEX(ddebug_lock); +static LIST_HEAD(ddebug_tables); +static int verbose = 0; + +/* Return the last part of a pathname */ +static inline const char *basename(const char *path) +{ + const char *tail = strrchr(path, '/'); + return tail ? tail+1 : path; +} + +/* format a string into buf[] which describes the _ddebug's flags */ +static char *ddebug_describe_flags(struct _ddebug *dp, char *buf, + size_t maxlen) +{ + char *p = buf; + + BUG_ON(maxlen < 4); + if (dp->flags & _DPRINTK_FLAGS_PRINT) + *p++ = 'p'; + if (p == buf) + *p++ = '-'; + *p = '\0'; + + return buf; +} + +/* + * must be called with ddebug_lock held + */ + +static int disabled_hash(char hash, bool first_table) +{ + struct ddebug_table *dt; + char table_hash_value; + + list_for_each_entry(dt, &ddebug_tables, link) { + if (first_table) + table_hash_value = dt->ddebugs->primary_hash; + else + table_hash_value = dt->ddebugs->secondary_hash; + if (dt->num_enabled && (hash == table_hash_value)) + return 0; + } + return 1; +} + +/* + * Search the tables for _ddebug's which match the given + * `query' and apply the `flags' and `mask' to them. Tells + * the user which ddebug's were changed, or whether none + * were matched. + */ +static void ddebug_change(const struct ddebug_query *query, + unsigned int flags, unsigned int mask) +{ + int i; + struct ddebug_table *dt; + unsigned int newflags; + unsigned int nfound = 0; + char flagbuf[8]; + + /* search for matching ddebugs */ + mutex_lock(&ddebug_lock); + list_for_each_entry(dt, &ddebug_tables, link) { + + /* match against the module name */ + if (query->module != NULL && + strcmp(query->module, dt->mod_name)) + continue; + + for (i = 0 ; i < dt->num_ddebugs ; i++) { + struct _ddebug *dp = &dt->ddebugs[i]; + + /* match against the source filename */ + if (query->filename != NULL && + strcmp(query->filename, dp->filename) && + strcmp(query->filename, basename(dp->filename))) + continue; + + /* match against the function */ + if (query->function != NULL && + strcmp(query->function, dp->function)) + continue; + + /* match against the format */ + if (query->format != NULL && + strstr(dp->format, query->format) == NULL) + continue; + + /* match against the line number range */ + if (query->first_lineno && + dp->lineno < query->first_lineno) + continue; + if (query->last_lineno && + dp->lineno > query->last_lineno) + continue; + + nfound++; + + newflags = (dp->flags & mask) | flags; + if (newflags == dp->flags) + continue; + + if (!newflags) + dt->num_enabled--; + else if (!dp-flags) + dt->num_enabled++; + dp->flags = newflags; + if (newflags) { + dynamic_debug_enabled |= + (1LL << dp->primary_hash); + dynamic_debug_enabled2 |= + (1LL << dp->secondary_hash); + } else { + if (disabled_hash(dp->primary_hash, true)) + dynamic_debug_enabled &= + ~(1LL << dp->primary_hash); + if (disabled_hash(dp->secondary_hash, false)) + dynamic_debug_enabled2 &= + ~(1LL << dp->secondary_hash); + } + if (verbose) + printk(KERN_INFO + "ddebug: changed %s:%d [%s]%s %s\n", + dp->filename, dp->lineno, + dt->mod_name, dp->function, + ddebug_describe_flags(dp, flagbuf, + sizeof(flagbuf))); + } + } + mutex_unlock(&ddebug_lock); + + if (!nfound && verbose) + printk(KERN_INFO "ddebug: no matches for query\n"); +} + +/* + * Wrapper around strsep() to collapse the multiple empty tokens + * that it returns when fed sequences of separator characters. + * Now, if we had strtok_r()... + */ +static inline char *nearly_strtok_r(char **p, const char *sep) +{ + char *r; + + while ((r = strsep(p, sep)) != NULL && *r == '\0') + ; + return r; +} + +/* + * Split the buffer `buf' into space-separated words. + * Return the number of such words or <0 on error. + */ +static int ddebug_tokenize(char *buf, char *words[], int maxwords) +{ + int nwords = 0; + + while (nwords < maxwords && + (words[nwords] = nearly_strtok_r(&buf, " \t\r\n")) != NULL) + nwords++; + if (buf) + return -EINVAL; /* ran out of words[] before bytes */ + + if (verbose) { + int i; + printk(KERN_INFO "%s: split into words:", __func__); + for (i = 0 ; i < nwords ; i++) + printk(" \"%s\"", words[i]); + printk("\n"); + } + + return nwords; +} + +/* + * Parse a single line number. Note that the empty string "" + * is treated as a special case and converted to zero, which + * is later treated as a "don't care" value. + */ +static inline int parse_lineno(const char *str, unsigned int *val) +{ + char *end = NULL; + BUG_ON(str == NULL); + if (*str == '\0') { + *val = 0; + return 0; + } + *val = simple_strtoul(str, &end, 10); + return end == NULL || end == str || *end != '\0' ? -EINVAL : 0; +} + +/* + * Undo octal escaping in a string, inplace. This is useful to + * allow the user to express a query which matches a format + * containing embedded spaces. + */ +#define isodigit(c) ((c) >= '0' && (c) <= '7') +static char *unescape(char *str) +{ + char *in = str; + char *out = str; + + while (*in) { + if (*in == '\\') { + if (in[1] == '\\') { + *out++ = '\\'; + in += 2; + continue; + } else if (in[1] == 't') { + *out++ = '\t'; + in += 2; + continue; + } else if (in[1] == 'n') { + *out++ = '\n'; + in += 2; + continue; + } else if (isodigit(in[1]) && + isodigit(in[2]) && + isodigit(in[3])) { + *out++ = ((in[1] - '0')<<6) | + ((in[2] - '0')<<3) | + (in[3] - '0'); + in += 4; + continue; + } + } + *out++ = *in++; + } + *out = '\0'; + + return str; +} + +/* + * Parse words[] as a ddebug query specification, which is a series + * of (keyword, value) pairs chosen from these possibilities: + * + * func + * file + * file + * module + * format + * line + * line - // where either may be empty + */ +static int ddebug_parse_query(char *words[], int nwords, + struct ddebug_query *query) +{ + unsigned int i; + + /* check we have an even number of words */ + if (nwords % 2 != 0) + return -EINVAL; + memset(query, 0, sizeof(*query)); + + for (i = 0 ; i < nwords ; i += 2) { + if (!strcmp(words[i], "func")) + query->function = words[i+1]; + else if (!strcmp(words[i], "file")) + query->filename = words[i+1]; + else if (!strcmp(words[i], "module")) + query->module = words[i+1]; + else if (!strcmp(words[i], "format")) + query->format = unescape(words[i+1]); + else if (!strcmp(words[i], "line")) { + char *first = words[i+1]; + char *last = strchr(first, '-'); + if (last) + *last++ = '\0'; + if (parse_lineno(first, &query->first_lineno) < 0) + return -EINVAL; + if (last != NULL) { + /* range - */ + if (parse_lineno(last, &query->last_lineno) < 0) + return -EINVAL; + } else { + query->last_lineno = query->first_lineno; + } + } else { + if (verbose) + printk(KERN_ERR "%s: unknown keyword \"%s\"\n", + __func__, words[i]); + return -EINVAL; + } + } + + if (verbose) + printk(KERN_INFO "%s: q->function=\"%s\" q->filename=\"%s\" " + "q->module=\"%s\" q->format=\"%s\" q->lineno=%u-%u\n", + __func__, query->function, query->filename, + query->module, query->format, query->first_lineno, + query->last_lineno); + + return 0; +} + +/* + * Parse `str' as a flags specification, format [-+=][p]+. + * Sets up *maskp and *flagsp to be used when changing the + * flags fields of matched _ddebug's. Returns 0 on success + * or <0 on error. + */ +static int ddebug_parse_flags(const char *str, unsigned int *flagsp, + unsigned int *maskp) +{ + unsigned flags = 0; + int op = '='; + + switch (*str) { + case '+': + case '-': + case '=': + op = *str++; + break; + default: + return -EINVAL; + } + if (verbose) + printk(KERN_INFO "%s: op='%c'\n", __func__, op); + + for ( ; *str ; ++str) { + switch (*str) { + case 'p': + flags |= _DPRINTK_FLAGS_PRINT; + break; + default: + return -EINVAL; + } + } + if (flags == 0) + return -EINVAL; + if (verbose) + printk(KERN_INFO "%s: flags=0x%x\n", __func__, flags); + + /* calculate final *flagsp, *maskp according to mask and op */ + switch (op) { + case '=': + *maskp = 0; + *flagsp = flags; + break; + case '+': + *maskp = ~0U; + *flagsp = flags; + break; + case '-': + *maskp = ~flags; + *flagsp = 0; + break; + } + if (verbose) + printk(KERN_INFO "%s: *flagsp=0x%x *maskp=0x%x\n", + __func__, *flagsp, *maskp); + return 0; +} + +/* + * File_ops->write method for /dynamic_debug/conrol. Gathers the + * command text from userspace, parses and executes it. + */ +static ssize_t ddebug_proc_write(struct file *file, const char __user *ubuf, + size_t len, loff_t *offp) +{ + unsigned int flags = 0, mask = 0; + struct ddebug_query query; +#define MAXWORDS 9 + int nwords; + char *words[MAXWORDS]; + char tmpbuf[256]; + + if (len == 0) + return 0; + /* we don't check *offp -- multiple writes() are allowed */ + if (len > sizeof(tmpbuf)-1) + return -E2BIG; + if (copy_from_user(tmpbuf, ubuf, len)) + return -EFAULT; + tmpbuf[len] = '\0'; + if (verbose) + printk(KERN_INFO "%s: read %d bytes from userspace\n", + __func__, (int)len); + + nwords = ddebug_tokenize(tmpbuf, words, MAXWORDS); + if (nwords < 0) + return -EINVAL; + if (ddebug_parse_query(words, nwords-1, &query)) + return -EINVAL; + if (ddebug_parse_flags(words[nwords-1], &flags, &mask)) + return -EINVAL; + + /* actually go and implement the change */ + ddebug_change(&query, flags, mask); + + *offp += len; + return len; +} + +/* + * Set the iterator to point to the first _ddebug object + * and return a pointer to that first object. Returns + * NULL if there are no _ddebugs at all. + */ +static struct _ddebug *ddebug_iter_first(struct ddebug_iter *iter) +{ + if (list_empty(&ddebug_tables)) { + iter->table = NULL; + iter->idx = 0; + return NULL; + } + iter->table = list_entry(ddebug_tables.next, + struct ddebug_table, link); + iter->idx = 0; + return &iter->table->ddebugs[iter->idx]; +} + +/* + * Advance the iterator to point to the next _ddebug + * object from the one the iterator currently points at, + * and returns a pointer to the new _ddebug. Returns + * NULL if the iterator has seen all the _ddebugs. + */ +static struct _ddebug *ddebug_iter_next(struct ddebug_iter *iter) +{ + if (iter->table == NULL) + return NULL; + if (++iter->idx == iter->table->num_ddebugs) { + /* iterate to next table */ + iter->idx = 0; + if (list_is_last(&iter->table->link, &ddebug_tables)) { + iter->table = NULL; + return NULL; + } + iter->table = list_entry(iter->table->link.next, + struct ddebug_table, link); + } + return &iter->table->ddebugs[iter->idx]; +} + +/* + * Seq_ops start method. Called at the start of every + * read() call from userspace. Takes the ddebug_lock and + * seeks the seq_file's iterator to the given position. + */ +static void *ddebug_proc_start(struct seq_file *m, loff_t *pos) +{ + struct ddebug_iter *iter = m->private; + struct _ddebug *dp; + int n = *pos; + + if (verbose) + printk(KERN_INFO "%s: called m=%p *pos=%lld\n", + __func__, m, (unsigned long long)*pos); + + mutex_lock(&ddebug_lock); + + if (!n) + return SEQ_START_TOKEN; + if (n < 0) + return NULL; + dp = ddebug_iter_first(iter); + while (dp != NULL && --n > 0) + dp = ddebug_iter_next(iter); + return dp; +} + +/* + * Seq_ops next method. Called several times within a read() + * call from userspace, with ddebug_lock held. Walks to the + * next _ddebug object with a special case for the header line. + */ +static void *ddebug_proc_next(struct seq_file *m, void *p, loff_t *pos) +{ + struct ddebug_iter *iter = m->private; + struct _ddebug *dp; + + if (verbose) + printk(KERN_INFO "%s: called m=%p p=%p *pos=%lld\n", + __func__, m, p, (unsigned long long)*pos); + + if (p == SEQ_START_TOKEN) + dp = ddebug_iter_first(iter); + else + dp = ddebug_iter_next(iter); + ++*pos; + return dp; +} + +/* + * Seq_ops show method. Called several times within a read() + * call from userspace, with ddebug_lock held. Formats the + * current _ddebug as a single human-readable line, with a + * special case for the header line. + */ +static int ddebug_proc_show(struct seq_file *m, void *p) +{ + struct ddebug_iter *iter = m->private; + struct _ddebug *dp = p; + char flagsbuf[8]; + + if (verbose) + printk(KERN_INFO "%s: called m=%p p=%p\n", + __func__, m, p); + + if (p == SEQ_START_TOKEN) { + seq_puts(m, + "# filename:lineno [module]function flags format\n"); + return 0; + } + + seq_printf(m, "%s:%u [%s]%s %s \"", + dp->filename, dp->lineno, + iter->table->mod_name, dp->function, + ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf))); + seq_escape(m, dp->format, "\t\r\n\""); + seq_puts(m, "\"\n"); + + return 0; +} + +/* + * Seq_ops stop method. Called at the end of each read() + * call from userspace. Drops ddebug_lock. + */ +static void ddebug_proc_stop(struct seq_file *m, void *p) +{ + if (verbose) + printk(KERN_INFO "%s: called m=%p p=%p\n", + __func__, m, p); + mutex_unlock(&ddebug_lock); +} + +static const struct seq_operations ddebug_proc_seqops = { + .start = ddebug_proc_start, + .next = ddebug_proc_next, + .show = ddebug_proc_show, + .stop = ddebug_proc_stop +}; + +/* + * File_ops->open method for /dynamic_debug/control. Does the seq_file + * setup dance, and also creates an iterator to walk the _ddebugs. + * Note that we create a seq_file always, even for O_WRONLY files + * where it's not needed, as doing so simplifies the ->release method. + */ +static int ddebug_proc_open(struct inode *inode, struct file *file) +{ + struct ddebug_iter *iter; + int err; + + if (verbose) + printk(KERN_INFO "%s: called\n", __func__); + + iter = kzalloc(sizeof(*iter), GFP_KERNEL); + if (iter == NULL) + return -ENOMEM; + + err = seq_open(file, &ddebug_proc_seqops); + if (err) { + kfree(iter); + return err; + } + ((struct seq_file *) file->private_data)->private = iter; + return 0; +} + +static const struct file_operations ddebug_proc_fops = { + .owner = THIS_MODULE, + .open = ddebug_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, + .write = ddebug_proc_write +}; + +/* + * Allocate a new ddebug_table for the given module + * and add it to the global list. + */ +int ddebug_add_module(struct _ddebug *tab, unsigned int n, + const char *name) +{ + struct ddebug_table *dt; + char *new_name; + + dt = kzalloc(sizeof(*dt), GFP_KERNEL); + if (dt == NULL) + return -ENOMEM; + new_name = kstrdup(name, GFP_KERNEL); + if (new_name == NULL) { + kfree(dt); + return -ENOMEM; + } + dt->mod_name = new_name; + dt->num_ddebugs = n; + dt->num_enabled = 0; + dt->ddebugs = tab; + + mutex_lock(&ddebug_lock); + list_add_tail(&dt->link, &ddebug_tables); + mutex_unlock(&ddebug_lock); + + if (verbose) + printk(KERN_INFO "%u debug prints in module %s\n", + n, dt->mod_name); + return 0; +} +EXPORT_SYMBOL_GPL(ddebug_add_module); + +static void ddebug_table_free(struct ddebug_table *dt) +{ + list_del_init(&dt->link); + kfree(dt->mod_name); + kfree(dt); +} + +/* + * Called in response to a module being unloaded. Removes + * any ddebug_table's which point at the module. + */ +int ddebug_remove_module(char *mod_name) +{ + struct ddebug_table *dt, *nextdt; + int ret = -ENOENT; + + if (verbose) + printk(KERN_INFO "%s: removing module \"%s\"\n", + __func__, mod_name); + + mutex_lock(&ddebug_lock); + list_for_each_entry_safe(dt, nextdt, &ddebug_tables, link) { + if (!strcmp(dt->mod_name, mod_name)) { + ddebug_table_free(dt); + ret = 0; + } + } + mutex_unlock(&ddebug_lock); + return ret; +} +EXPORT_SYMBOL_GPL(ddebug_remove_module); + +static void ddebug_remove_all_tables(void) +{ + mutex_lock(&ddebug_lock); + while (!list_empty(&ddebug_tables)) { + struct ddebug_table *dt = list_entry(ddebug_tables.next, + struct ddebug_table, + link); + ddebug_table_free(dt); + } + mutex_unlock(&ddebug_lock); +} + +static int __init dynamic_debug_init(void) +{ + struct dentry *dir, *file; + struct _ddebug *iter, *iter_start; + const char *modname = NULL; + int ret = 0; + int n = 0; + + dir = debugfs_create_dir("dynamic_debug", NULL); + if (!dir) + return -ENOMEM; + file = debugfs_create_file("control", 0644, dir, NULL, + &ddebug_proc_fops); + if (!file) { + debugfs_remove(dir); + return -ENOMEM; + } + if (__start___verbose != __stop___verbose) { + iter = __start___verbose; + modname = iter->modname; + iter_start = iter; + for (; iter < __stop___verbose; iter++) { + if (strcmp(modname, iter->modname)) { + ret = ddebug_add_module(iter_start, n, modname); + if (ret) + goto out_free; + n = 0; + modname = iter->modname; + iter_start = iter; + } + n++; + } + ret = ddebug_add_module(iter_start, n, modname); + } +out_free: + if (ret) { + ddebug_remove_all_tables(); + debugfs_remove(dir); + debugfs_remove(file); + } + return 0; +} +module_init(dynamic_debug_init); diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c deleted file mode 100644 index 165a19763dc9..000000000000 --- a/lib/dynamic_printk.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * lib/dynamic_printk.c - * - * make pr_debug()/dev_dbg() calls runtime configurable based upon their - * their source module. - * - * Copyright (C) 2008 Red Hat, Inc., Jason Baron - */ - -#include -#include -#include -#include -#include -#include - -extern struct mod_debug __start___verbose[]; -extern struct mod_debug __stop___verbose[]; - -struct debug_name { - struct hlist_node hlist; - struct hlist_node hlist2; - int hash1; - int hash2; - char *name; - int enable; - int type; -}; - -static int nr_entries; -static int num_enabled; -int dynamic_enabled = DYNAMIC_ENABLED_NONE; -static struct hlist_head module_table[DEBUG_HASH_TABLE_SIZE] = - { [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT }; -static struct hlist_head module_table2[DEBUG_HASH_TABLE_SIZE] = - { [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT }; -static DECLARE_MUTEX(debug_list_mutex); - -/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which - * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They - * use independent hash functions, to reduce the chance of false positives. - */ -long long dynamic_printk_enabled; -EXPORT_SYMBOL_GPL(dynamic_printk_enabled); -long long dynamic_printk_enabled2; -EXPORT_SYMBOL_GPL(dynamic_printk_enabled2); - -/* returns the debug module pointer. */ -static struct debug_name *find_debug_module(char *module_name) -{ - int i; - struct hlist_head *head; - struct hlist_node *node; - struct debug_name *element; - - element = NULL; - for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) { - head = &module_table[i]; - hlist_for_each_entry_rcu(element, node, head, hlist) - if (!strcmp(element->name, module_name)) - return element; - } - return NULL; -} - -/* returns the debug module pointer. */ -static struct debug_name *find_debug_module_hash(char *module_name, int hash) -{ - struct hlist_head *head; - struct hlist_node *node; - struct debug_name *element; - - element = NULL; - head = &module_table[hash]; - hlist_for_each_entry_rcu(element, node, head, hlist) - if (!strcmp(element->name, module_name)) - return element; - return NULL; -} - -/* caller must hold mutex*/ -static int __add_debug_module(char *mod_name, int hash, int hash2) -{ - struct debug_name *new; - char *module_name; - int ret = 0; - - if (find_debug_module(mod_name)) { - ret = -EINVAL; - goto out; - } - module_name = kmalloc(strlen(mod_name) + 1, GFP_KERNEL); - if (!module_name) { - ret = -ENOMEM; - goto out; - } - module_name = strcpy(module_name, mod_name); - module_name[strlen(mod_name)] = '\0'; - new = kzalloc(sizeof(struct debug_name), GFP_KERNEL); - if (!new) { - kfree(module_name); - ret = -ENOMEM; - goto out; - } - INIT_HLIST_NODE(&new->hlist); - INIT_HLIST_NODE(&new->hlist2); - new->name = module_name; - new->hash1 = hash; - new->hash2 = hash2; - hlist_add_head_rcu(&new->hlist, &module_table[hash]); - hlist_add_head_rcu(&new->hlist2, &module_table2[hash2]); - nr_entries++; -out: - return ret; -} - -int unregister_dynamic_debug_module(char *mod_name) -{ - struct debug_name *element; - int ret = 0; - - down(&debug_list_mutex); - element = find_debug_module(mod_name); - if (!element) { - ret = -EINVAL; - goto out; - } - hlist_del_rcu(&element->hlist); - hlist_del_rcu(&element->hlist2); - synchronize_rcu(); - kfree(element->name); - if (element->enable) - num_enabled--; - kfree(element); - nr_entries--; -out: - up(&debug_list_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module); - -int register_dynamic_debug_module(char *mod_name, int type, char *share_name, - char *flags, int hash, int hash2) -{ - struct debug_name *elem; - int ret = 0; - - down(&debug_list_mutex); - elem = find_debug_module(mod_name); - if (!elem) { - if (__add_debug_module(mod_name, hash, hash2)) - goto out; - elem = find_debug_module(mod_name); - if (dynamic_enabled == DYNAMIC_ENABLED_ALL && - !strcmp(mod_name, share_name)) { - elem->enable = true; - num_enabled++; - } - } - elem->type |= type; -out: - up(&debug_list_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(register_dynamic_debug_module); - -int __dynamic_dbg_enabled_helper(char *mod_name, int type, int value, int hash) -{ - struct debug_name *elem; - int ret = 0; - - if (dynamic_enabled == DYNAMIC_ENABLED_ALL) - return 1; - rcu_read_lock(); - elem = find_debug_module_hash(mod_name, hash); - if (elem && elem->enable) - ret = 1; - rcu_read_unlock(); - return ret; -} -EXPORT_SYMBOL_GPL(__dynamic_dbg_enabled_helper); - -static void set_all(bool enable) -{ - struct debug_name *e; - struct hlist_node *node; - int i; - long long enable_mask; - - for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) { - if (module_table[i].first != NULL) { - hlist_for_each_entry(e, node, &module_table[i], hlist) { - e->enable = enable; - } - } - } - if (enable) - enable_mask = ULLONG_MAX; - else - enable_mask = 0; - dynamic_printk_enabled = enable_mask; - dynamic_printk_enabled2 = enable_mask; -} - -static int disabled_hash(int i, bool first_table) -{ - struct debug_name *e; - struct hlist_node *node; - - if (first_table) { - hlist_for_each_entry(e, node, &module_table[i], hlist) { - if (e->enable) - return 0; - } - } else { - hlist_for_each_entry(e, node, &module_table2[i], hlist2) { - if (e->enable) - return 0; - } - } - return 1; -} - -static ssize_t pr_debug_write(struct file *file, const char __user *buf, - size_t length, loff_t *ppos) -{ - char *buffer, *s, *value_str, *setting_str; - int err, value; - struct debug_name *elem = NULL; - int all = 0; - - if (length > PAGE_SIZE || length < 0) - return -EINVAL; - - buffer = (char *)__get_free_page(GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - err = -EFAULT; - if (copy_from_user(buffer, buf, length)) - goto out; - - err = -EINVAL; - if (length < PAGE_SIZE) - buffer[length] = '\0'; - else if (buffer[PAGE_SIZE-1]) - goto out; - - err = -EINVAL; - down(&debug_list_mutex); - - if (strncmp("set", buffer, 3)) - goto out_up; - s = buffer + 3; - setting_str = strsep(&s, "="); - if (s == NULL) - goto out_up; - setting_str = strstrip(setting_str); - value_str = strsep(&s, " "); - if (s == NULL) - goto out_up; - s = strstrip(s); - if (!strncmp(s, "all", 3)) - all = 1; - else - elem = find_debug_module(s); - if (!strncmp(setting_str, "enable", 6)) { - value = !!simple_strtol(value_str, NULL, 10); - if (all) { - if (value) { - set_all(true); - num_enabled = nr_entries; - dynamic_enabled = DYNAMIC_ENABLED_ALL; - } else { - set_all(false); - num_enabled = 0; - dynamic_enabled = DYNAMIC_ENABLED_NONE; - } - err = 0; - } else if (elem) { - if (value && (elem->enable == 0)) { - dynamic_printk_enabled |= (1LL << elem->hash1); - dynamic_printk_enabled2 |= (1LL << elem->hash2); - elem->enable = 1; - num_enabled++; - dynamic_enabled = DYNAMIC_ENABLED_SOME; - err = 0; - printk(KERN_DEBUG - "debugging enabled for module %s\n", - elem->name); - } else if (!value && (elem->enable == 1)) { - elem->enable = 0; - num_enabled--; - if (disabled_hash(elem->hash1, true)) - dynamic_printk_enabled &= - ~(1LL << elem->hash1); - if (disabled_hash(elem->hash2, false)) - dynamic_printk_enabled2 &= - ~(1LL << elem->hash2); - if (num_enabled) - dynamic_enabled = DYNAMIC_ENABLED_SOME; - else - dynamic_enabled = DYNAMIC_ENABLED_NONE; - err = 0; - printk(KERN_DEBUG - "debugging disabled for module %s\n", - elem->name); - } - } - } - if (!err) - err = length; -out_up: - up(&debug_list_mutex); -out: - free_page((unsigned long)buffer); - return err; -} - -static void *pr_debug_seq_start(struct seq_file *f, loff_t *pos) -{ - return (*pos < DEBUG_HASH_TABLE_SIZE) ? pos : NULL; -} - -static void *pr_debug_seq_next(struct seq_file *s, void *v, loff_t *pos) -{ - (*pos)++; - if (*pos >= DEBUG_HASH_TABLE_SIZE) - return NULL; - return pos; -} - -static void pr_debug_seq_stop(struct seq_file *s, void *v) -{ - /* Nothing to do */ -} - -static int pr_debug_seq_show(struct seq_file *s, void *v) -{ - struct hlist_head *head; - struct hlist_node *node; - struct debug_name *elem; - unsigned int i = *(loff_t *) v; - - rcu_read_lock(); - head = &module_table[i]; - hlist_for_each_entry_rcu(elem, node, head, hlist) { - seq_printf(s, "%s enabled=%d", elem->name, elem->enable); - seq_printf(s, "\n"); - } - rcu_read_unlock(); - return 0; -} - -static struct seq_operations pr_debug_seq_ops = { - .start = pr_debug_seq_start, - .next = pr_debug_seq_next, - .stop = pr_debug_seq_stop, - .show = pr_debug_seq_show -}; - -static int pr_debug_open(struct inode *inode, struct file *filp) -{ - return seq_open(filp, &pr_debug_seq_ops); -} - -static const struct file_operations pr_debug_operations = { - .open = pr_debug_open, - .read = seq_read, - .write = pr_debug_write, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int __init dynamic_printk_init(void) -{ - struct dentry *dir, *file; - struct mod_debug *iter; - unsigned long value; - - dir = debugfs_create_dir("dynamic_printk", NULL); - if (!dir) - return -ENOMEM; - file = debugfs_create_file("modules", 0644, dir, NULL, - &pr_debug_operations); - if (!file) { - debugfs_remove(dir); - return -ENOMEM; - } - for (value = (unsigned long)__start___verbose; - value < (unsigned long)__stop___verbose; - value += sizeof(struct mod_debug)) { - iter = (struct mod_debug *)value; - register_dynamic_debug_module(iter->modname, - iter->type, - iter->logical_modname, - iter->flag_names, iter->hash, iter->hash2); - } - if (dynamic_enabled == DYNAMIC_ENABLED_ALL) - set_all(true); - return 0; -} -module_init(dynamic_printk_init); -/* may want to move this earlier so we can get traces as early as possible */ - -static int __init dynamic_printk_setup(char *str) -{ - if (str) - return -ENOENT; - dynamic_enabled = DYNAMIC_ENABLED_ALL; - return 0; -} -/* Use early_param(), so we can get debug output as early as possible */ -early_param("dynamic_printk", dynamic_printk_setup); diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index 9e169ef2e854..12bd09dbd36c 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -66,7 +66,7 @@ void struct nf_conntrack_expect *exp) __read_mostly; EXPORT_SYMBOL_GPL(nf_nat_pptp_hook_expectfn); -#if defined(DEBUG) || defined(CONFIG_DYNAMIC_PRINTK_DEBUG) +#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) /* PptpControlMessageType names */ const char *const pptp_msg_name[] = { "UNKNOWN_MESSAGE", diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index e06365775bdf..c18fa150b6fe 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -97,7 +97,7 @@ modname_flags = $(if $(filter 1,$(words $(modname))),\ -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") #hash values -ifdef CONFIG_DYNAMIC_PRINTK_DEBUG +ifdef CONFIG_DYNAMIC_DEBUG debug_flags = -D"DEBUG_HASH=$(shell ./scripts/basic/hash djb2 $(@D)$(modname))"\ -D"DEBUG_HASH2=$(shell ./scripts/basic/hash r5 $(@D)$(modname))" else -- cgit v1.2.3 From 86151fdf38b3795f292b39defbff39d2684b9c8c Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 5 Feb 2009 11:53:15 -0500 Subject: dynamic debug: update docs updates the documentation for 'dynamic debug' feature. Signed-off-by: Greg Banks Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- Documentation/dynamic-debug-howto.txt | 232 ++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 72 ++++++----- 2 files changed, 273 insertions(+), 31 deletions(-) create mode 100644 Documentation/dynamic-debug-howto.txt diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt new file mode 100644 index 000000000000..68394825e86b --- /dev/null +++ b/Documentation/dynamic-debug-howto.txt @@ -0,0 +1,232 @@ + +Introduction +============ + +This document describes how to use the dynamic debug (ddebug) feature. + +Dynamic debug is designed to allow you to dynamically enable/disable kernel +code to obtain additional kernel information. Currently, if +CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_debug() calls can be +dynamically enabled per-callsite. + +Dynamic debug has even more useful features: + + * Simple query language allows turning on and off debugging statements by + matching any combination of: + + - source filename + - function name + - line number (including ranges of line numbers) + - module name + - format string + + * Provides a debugfs control file: /dynamic_debug/control which can be + read to display the complete list of known debug statements, to help guide you + +Controlling dynamic debug Behaviour +=============================== + +The behaviour of pr_debug()/dev_debug()s are controlled via writing to a +control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs +filesystem, in order to make use of this feature. Subsequently, we refer to the +control file as: /dynamic_debug/control. For example, if you want to +enable printing from source file 'svcsock.c', line 1603 you simply do: + +nullarbor:~ # echo 'file svcsock.c line 1603 +p' > + /dynamic_debug/control + +If you make a mistake with the syntax, the write will fail thus: + +nullarbor:~ # echo 'file svcsock.c wtf 1 +p' > + /dynamic_debug/control +-bash: echo: write error: Invalid argument + +Viewing Dynamic Debug Behaviour +=========================== + +You can view the currently configured behaviour of all the debug statements +via: + +nullarbor:~ # cat /dynamic_debug/control +# filename:lineno [module]function flags format +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA\040Module\040Removed,\040deregister\040RPC\040RDMA\040transport\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline\040\040\040\040\040\040\040:\040%d\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth\040\040\040\040\040\040\040\040\040:\040%d\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests\040\040\040\040\040:\040%d\012" +... + + +You can also apply standard Unix text manipulation filters to this +data, e.g. + +nullarbor:~ # grep -i rdma /dynamic_debug/control | wc -l +62 + +nullarbor:~ # grep -i tcp /dynamic_debug/control | wc -l +42 + +Note in particular that the third column shows the enabled behaviour +flags for each debug statement callsite (see below for definitions of the +flags). The default value, no extra behaviour enabled, is "-". So +you can view all the debug statement callsites with any non-default flags: + +nullarbor:~ # awk '$3 != "-"' /dynamic_debug/control +# filename:lineno [module]function flags format +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process:\040st_sendto\040returned\040%d\012" + + +Command Language Reference +========================== + +At the lexical level, a command comprises a sequence of words separated +by whitespace characters. Note that newlines are treated as word +separators and do *not* end a command or allow multiple commands to +be done together. So these are all equivalent: + +nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' > + /dynamic_debug/control +nullarbor:~ # echo -c ' file svcsock.c line 1603 +p ' > + /dynamic_debug/control +nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' > + /dynamic_debug/control +nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > + /dynamic_debug/control + +Commands are bounded by a write() system call. If you want to do +multiple commands you need to do a separate "echo" for each, like: + +nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\ +> echo 'file svcsock.c line 1563 +p' > /proc/dprintk + +or even like: + +nullarbor:~ # ( +> echo 'file svcsock.c line 1603 +p' ;\ +> echo 'file svcsock.c line 1563 +p' ;\ +> ) > /proc/dprintk + +At the syntactical level, a command comprises a sequence of match +specifications, followed by a flags change specification. + +command ::= match-spec* flags-spec + +The match-spec's are used to choose a subset of the known dprintk() +callsites to which to apply the flags-spec. Think of them as a query +with implicit ANDs between each pair. Note that an empty list of +match-specs is possible, but is not very useful because it will not +match any debug statement callsites. + +A match specification comprises a keyword, which controls the attribute +of the callsite to be compared, and a value to compare against. Possible +keywords are: + +match-spec ::= 'func' string | + 'file' string | + 'module' string | + 'format' string | + 'line' line-range + +line-range ::= lineno | + '-'lineno | + lineno'-' | + lineno'-'lineno +// Note: line-range cannot contain space, e.g. +// "1-30" is valid range but "1 - 30" is not. + +lineno ::= unsigned-int + +The meanings of each keyword are: + +func + The given string is compared against the function name + of each callsite. Example: + + func svc_tcp_accept + +file + The given string is compared against either the full + pathname or the basename of the source file of each + callsite. Examples: + + file svcsock.c + file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c + +module + The given string is compared against the module name + of each callsite. The module name is the string as + seen in "lsmod", i.e. without the directory or the .ko + suffix and with '-' changed to '_'. Examples: + + module sunrpc + module nfsd + +format + The given string is searched for in the dynamic debug format + string. Note that the string does not need to match the + entire format, only some part. Whitespace and other + special characters can be escaped using C octal character + escape \ooo notation, e.g. the space character is \040. + Examples: + + format svcrdma: // many of the NFS/RDMA server dprintks + format readahead // some dprintks in the readahead cache + format nfsd:\040SETATTR // how to match a format with whitespace + +line + The given line number or range of line numbers is compared + against the line number of each dprintk() callsite. A single + line number matches the callsite line number exactly. A + range of line numbers matches any callsite between the first + and last line number inclusive. An empty first number means + the first line in the file, an empty line number means the + last number in the file. Examples: + + line 1603 // exactly line 1603 + line 1600-1605 // the six lines from line 1600 to line 1605 + line -1605 // the 1605 lines from line 1 to line 1605 + line 1600- // all lines from line 1600 to the end of the file + +The flags specification comprises a change operation followed +by one or more flag characters. The change operation is one +of the characters: + +- + remove the given flags + ++ + add the given flags + += + set the flags to the given flags + +The flags are: + +p + Causes a printk() message to be emitted to dmesg + +Note the regexp ^[-+=][scp]+$ matches a flags specification. +Note also that there is no convenient syntax to remove all +the flags at once, you need to use "-psc". + +Examples +======== + +// enable the message at line 1603 of file svcsock.c +nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > + /dynamic_debug/control + +// enable all the messages in file svcsock.c +nullarbor:~ # echo -n 'file svcsock.c +p' > + /dynamic_debug/control + +// enable all the messages in the NFS server module +nullarbor:~ # echo -n 'module nfsd +p' > + /dynamic_debug/control + +// enable all 12 messages in the function svc_process() +nullarbor:~ # echo -n 'func svc_process +p' > + /dynamic_debug/control + +// disable all 12 messages in the function svc_process() +nullarbor:~ # echo -n 'func svc_process -p' > + /dynamic_debug/control diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 0dd1c04c7323..8fee0a13ac58 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -848,59 +848,69 @@ config BUILD_DOCSRC Say N if you are unsure. config DYNAMIC_DEBUG - bool "Enable dynamic printk() call support" + bool "Enable dynamic printk() support" default n depends on PRINTK + depends on DEBUG_FS select PRINTK_DEBUG help Compiles debug level messages into the kernel, which would not otherwise be available at runtime. These messages can then be - enabled/disabled on a per module basis. This mechanism implicitly - enables all pr_debug() and dev_dbg() calls. The impact of this - compile option is a larger kernel text size of about 2%. + enabled/disabled based on various levels of scope - per source file, + function, module, format string, and line number. This mechanism + implicitly enables all pr_debug() and dev_dbg() calls. The impact of + this compile option is a larger kernel text size of about 2%. Usage: - Dynamic debugging is controlled by the debugfs file, - dynamic_printk/modules. This file contains a list of the modules that - can be enabled. The format of the file is the module name, followed - by a set of flags that can be enabled. The first flag is always the - 'enabled' flag. For example: + Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file, + which is contained in the 'debugfs' filesystem. Thus, the debugfs + filesystem must first be mounted before making use of this feature. + We refer the control file as: /dynamic_debug/ddebug. This + file contains a list of the debug statements that can be enabled. The + format for each line of the file is: - - . - . - . + filename:lineno [module]function flags format - : Name of the module in which the debug call resides - : whether the messages are enabled or not + filename : source file of the debug statement + lineno : line number of the debug statement + module : module that contains the debug statement + function : function that contains the debug statement + flags : 'p' means the line is turned 'on' for printing + format : the format used for the debug statement From a live system: - snd_hda_intel enabled=0 - fixup enabled=0 - driver enabled=0 + nullarbor:~ # cat /dynamic_debug/ddebug + # filename:lineno [module]function flags format + fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012" + fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012" + fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012" - Enable a module: + Example usage: - $echo "set enabled=1 " > dynamic_printk/modules + // enable the message at line 1603 of file svcsock.c + nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > + /dynamic_debug/ddebug - Disable a module: + // enable all the messages in file svcsock.c + nullarbor:~ # echo -n 'file svcsock.c +p' > + /dynamic_debug/ddebug - $echo "set enabled=0 " > dynamic_printk/modules + // enable all the messages in the NFS server module + nullarbor:~ # echo -n 'module nfsd +p' > + /dynamic_debug/ddebug - Enable all modules: + // enable all 12 messages in the function svc_process() + nullarbor:~ # echo -n 'func svc_process +p' > + /dynamic_debug/ddebug - $echo "set enabled=1 all" > dynamic_printk/modules + // disable all 12 messages in the function svc_process() + nullarbor:~ # echo -n 'func svc_process -p' > + /dynamic_debug/ddebug - Disable all modules: - - $echo "set enabled=0 all" > dynamic_printk/modules - - Finally, passing "dynamic_printk" at the command line enables - debugging for all modules. This mode can be turned off via the above - disable command. + See Documentation/dynamic-debug-howto.txt for additional information. source "samples/Kconfig" -- cgit v1.2.3 From 9898abb3d23311fa227a7f46bf4e40fd2954057f Mon Sep 17 00:00:00 2001 From: Greg Banks Date: Fri, 6 Feb 2009 12:54:26 +1100 Subject: Dynamic debug: allow simple quoting of words Allow simple quoting of words in the dynamic debug control language. This allows more natural specification when using the control language to match against printk formats, e.g #echo -n 'format "Setting node for non-present cpu" +p' > /mnt/debugfs/dynamic_debug/control instead of #echo -n 'format Setting\040node\040for\040non-present\040cpu +p' > /mnt/debugfs/dynamic_debug/control Adjust the dynamic debug documention to describe that and provide a new example. Adjust the existing examples in the documentation to reflect the current whitespace escaping behaviour when reading the control file. Fix some minor documentation trailing whitespace. Signed-off-by: Greg Banks Acked-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- Documentation/dynamic-debug-howto.txt | 20 +++++++++---- lib/dynamic_debug.c | 53 ++++++++++++++++++++++------------- 2 files changed, 47 insertions(+), 26 deletions(-) diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt index 68394825e86b..674c5663d346 100644 --- a/Documentation/dynamic-debug-howto.txt +++ b/Documentation/dynamic-debug-howto.txt @@ -49,10 +49,10 @@ via: nullarbor:~ # cat /dynamic_debug/control # filename:lineno [module]function flags format -/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA\040Module\040Removed,\040deregister\040RPC\040RDMA\040transport\012" -/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline\040\040\040\040\040\040\040:\040%d\012" -/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth\040\040\040\040\040\040\040\040\040:\040%d\012" -/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests\040\040\040\040\040:\040%d\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA Module Removed, deregister RPC RDMA transport\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline : %d\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth : %d\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests : %d\012" ... @@ -72,7 +72,7 @@ you can view all the debug statement callsites with any non-default flags: nullarbor:~ # awk '$3 != "-"' /dynamic_debug/control # filename:lineno [module]function flags format -/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process:\040st_sendto\040returned\040%d\012" +/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012" Command Language Reference @@ -166,11 +166,15 @@ format entire format, only some part. Whitespace and other special characters can be escaped using C octal character escape \ooo notation, e.g. the space character is \040. + Alternatively, the string can be enclosed in double quote + characters (") or single quote characters ('). Examples: format svcrdma: // many of the NFS/RDMA server dprintks format readahead // some dprintks in the readahead cache - format nfsd:\040SETATTR // how to match a format with whitespace + format nfsd:\040SETATTR // one way to match a format with whitespace + format "nfsd: SETATTR" // a neater way to match a format with whitespace + format 'nfsd: SETATTR' // yet another way to match a format with whitespace line The given line number or range of line numbers is compared @@ -230,3 +234,7 @@ nullarbor:~ # echo -n 'func svc_process +p' > // disable all 12 messages in the function svc_process() nullarbor:~ # echo -n 'func svc_process -p' > /dynamic_debug/control + +// enable messages for NFS calls READ, READLINK, READDIR and READDIR+. +nullarbor:~ # echo -n 'format "nfsd: READ" +p' > + /dynamic_debug/control diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c index 9e123ae326bc..833139ce1e22 100644 --- a/lib/dynamic_debug.c +++ b/lib/dynamic_debug.c @@ -195,33 +195,46 @@ static void ddebug_change(const struct ddebug_query *query, printk(KERN_INFO "ddebug: no matches for query\n"); } -/* - * Wrapper around strsep() to collapse the multiple empty tokens - * that it returns when fed sequences of separator characters. - * Now, if we had strtok_r()... - */ -static inline char *nearly_strtok_r(char **p, const char *sep) -{ - char *r; - - while ((r = strsep(p, sep)) != NULL && *r == '\0') - ; - return r; -} - /* * Split the buffer `buf' into space-separated words. - * Return the number of such words or <0 on error. + * Handles simple " and ' quoting, i.e. without nested, + * embedded or escaped \". Return the number of words + * or <0 on error. */ static int ddebug_tokenize(char *buf, char *words[], int maxwords) { int nwords = 0; - while (nwords < maxwords && - (words[nwords] = nearly_strtok_r(&buf, " \t\r\n")) != NULL) - nwords++; - if (buf) - return -EINVAL; /* ran out of words[] before bytes */ + while (*buf) { + char *end; + + /* Skip leading whitespace */ + while (*buf && isspace(*buf)) + buf++; + if (!*buf) + break; /* oh, it was trailing whitespace */ + + /* Run `end' over a word, either whitespace separated or quoted */ + if (*buf == '"' || *buf == '\'') { + int quote = *buf++; + for (end = buf ; *end && *end != quote ; end++) + ; + if (!*end) + return -EINVAL; /* unclosed quote */ + } else { + for (end = buf ; *end && !isspace(*end) ; end++) + ; + BUG_ON(end == buf); + } + /* Here `buf' is the start of the word, `end' is one past the end */ + + if (nwords == maxwords) + return -EINVAL; /* ran out of words[] before bytes */ + if (*end) + *end++ = '\0'; /* terminate the word */ + words[nwords++] = buf; + buf = end; + } if (verbose) { int i; -- cgit v1.2.3 From e6e66b02e11563abdb7f69dcb7a2efbd8d577e77 Mon Sep 17 00:00:00 2001 From: Greg Banks Date: Wed, 11 Mar 2009 21:07:28 +1100 Subject: Dynamic debug: fix pr_fmt() build error When CONFIG_DYNAMIC_DEBUG is enabled, allow callers of pr_debug() to provide their own definition of pr_fmt() even if that definition uses tricks like #define pr_fmt(fmt) "%s:" fmt, __func__ Signed-off-by: Greg Banks Cc: Jason Baron Acked-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 4 ++-- include/linux/kernel.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index 07781aaa1164..baabf33be244 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -57,7 +57,7 @@ extern int ddebug_remove_module(char *mod_name); { KBUILD_MODNAME, __func__, __FILE__, fmt, DEBUG_HASH, \ DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ - printk(KERN_DEBUG KBUILD_MODNAME ":" fmt, \ + printk(KERN_DEBUG KBUILD_MODNAME ":" pr_fmt(fmt), \ ##__VA_ARGS__); \ } while (0) @@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name); DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " fmt, \ + KBUILD_MODNAME ": " pr_fmt(fmt),\ ##__VA_ARGS__); \ } while (0) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index b5496ecbec71..914918abfdd1 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -359,8 +359,9 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_debug(fmt, ...) \ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #elif defined(CONFIG_DYNAMIC_DEBUG) +/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ #define pr_debug(fmt, ...) do { \ - dynamic_pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \ + dynamic_pr_debug(fmt, ##__VA_ARGS__); \ } while (0) #else #define pr_debug(fmt, ...) \ -- cgit v1.2.3 From 91b1a84c10869e2e46a576e5367de3166bff8ecc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:46:39 -0500 Subject: sata_mv: cleanup chipset GENeration FLAGS Clean up the chipset GENeration FLAGS, and rename them for consistency with other uses of GEN_XX within sata_mv. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 74b1080d116d..3dc35543fb3d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -120,14 +120,15 @@ enum { MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | - ATA_FLAG_PIO_POLLING, + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, + MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, - MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_AN, + ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI, + + MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, @@ -603,53 +604,49 @@ static struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ - .flags = MV_COMMON_FLAGS, + .flags = MV_GEN_I_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_508x */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_5080 */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_604x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ, + .flags = MV_GEN_II_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_608x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | MV_FLAG_DUAL_HC, + .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_6042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_7042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, -- cgit v1.2.3 From 00b81235aa0368f84c0e704bec4142cd8c516ad5 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:47:51 -0500 Subject: sata_mv: rearrange mv_start_dma() and friends Rearrange mv_start_dma() and friends, in preparation for adding non-EDMA DMA modes, and non-EDMA interrupts, to the driver. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 66 +++++++++++++++++++++++++++++---------------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3dc35543fb3d..fb3288bbd9fb 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -536,7 +536,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); static int mv_stop_edma(struct ata_port *ap); static int mv_stop_edma_engine(void __iomem *port_mmio); -static void mv_edma_cfg(struct ata_port *ap, int want_ncq); +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma); static void mv_pmp_select(struct ata_port *ap, int pmp); static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, @@ -849,8 +849,32 @@ static void mv_enable_port_irqs(struct ata_port *ap, mv_set_main_irq_mask(ap->host, disable_bits, enable_bits); } +static void mv_clear_and_enable_port_irqs(struct ata_port *ap, + void __iomem *port_mmio, + unsigned int port_irqs) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + int hardport = mv_hardport_from_port(ap->port_no); + void __iomem *hc_mmio = mv_hc_base_from_port( + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; + + /* clear EDMA event indicators, if any */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + + /* clear FIS IRQ Cause */ + if (IS_GEN_IIE(hpriv)) + writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + + mv_enable_port_irqs(ap, port_irqs); +} + /** - * mv_start_dma - Enable eDMA engine + * mv_start_edma - Enable eDMA engine * @base: port base address * @pp: port private data * @@ -860,7 +884,7 @@ static void mv_enable_port_irqs(struct ata_port *ap, * LOCKING: * Inherited from caller. */ -static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, +static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, struct mv_port_priv *pp, u8 protocol) { int want_ncq = (protocol == ATA_PROT_NCQ); @@ -872,26 +896,11 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, } if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { struct mv_host_priv *hpriv = ap->host->private_data; - int hardport = mv_hardport_from_port(ap->port_no); - void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), ap->port_no); - u32 hc_irq_cause; - - /* clear EDMA event indicators, if any */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - /* clear pending irq events */ - hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); - writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - mv_edma_cfg(ap, want_ncq); - - /* clear FIS IRQ Cause */ - if (IS_GEN_IIE(hpriv)) - writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + mv_edma_cfg(ap, want_ncq, 1); mv_set_edma_ptrs(port_mmio, hpriv, pp); - mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ); + mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; @@ -1173,7 +1182,7 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); } -static void mv_edma_cfg(struct ata_port *ap, int want_ncq) +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; struct mv_port_priv *pp = ap->private_data; @@ -1182,7 +1191,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~MV_PP_FLAG_FBS_EN; + pp->pp_flags &= ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1211,9 +1220,11 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) } cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ - cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (!IS_SOC(hpriv)) - cfg |= (1 << 18); /* enab early completion */ + if (want_edma) { + cfg |= (1 << 22); /* enab 4-entry host queue cache */ + if (!IS_SOC(hpriv)) + cfg |= (1 << 18); /* enab early completion */ + } if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ } @@ -1221,8 +1232,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) if (want_ncq) { cfg |= EDMA_CFG_NCQ; pp->pp_flags |= MV_PP_FLAG_NCQ_EN; - } else - pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN; + } writelfl(cfg, port_mmio + EDMA_CFG_OFS); } @@ -1591,7 +1601,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) return ata_sff_qc_issue(qc); } - mv_start_dma(ap, port_mmio, pp, qc->tf.protocol); + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; -- cgit v1.2.3 From f48765ccb48a62596b664aa88a2b0f943c12c0e1 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:48:41 -0500 Subject: sata_mv: restructure mv_qc_issue Rearrange logic in mv_qc_issue() to handle protocols other than ATA_PROT_DMA, ATA_PROT_NCQ, and ATA_PROT_PIO. This is in preparation for later enabling ATAPI support. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fb3288bbd9fb..0c25f52249df 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1565,14 +1565,26 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) */ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { + static int limit_warnings = 10; struct ata_port *ap = qc->ap; void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; + unsigned int port_irqs = DONE_IRQ | ERR_IRQ; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); + pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; + in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + + /* Write the request in pointer to kick the EDMA to life */ + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + return 0; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) { - static int limit_warnings = 10; + case ATA_PROT_PIO: /* * Errata SATA#16, SATA#24: warn if multiple DRQs expected. * @@ -1590,27 +1602,22 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) ": attempting PIO w/multiple DRQ: " "this may fail due to h/w errata\n"); } + /* drop through */ + case ATAPI_PROT_PIO: + port_irqs = ERR_IRQ; /* leave DONE_IRQ masked for PIO */ + /* drop through */ + default: /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing * shadow block, etc registers. */ mv_stop_edma(ap); - mv_enable_port_irqs(ap, ERR_IRQ); + mv_edma_cfg(ap, 0, 0); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); mv_pmp_select(ap, qc->dev->link->pmp); return ata_sff_qc_issue(qc); } - - mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); - - pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; - in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; - - /* and write the request in pointer to kick the EDMA to life */ - writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - return 0; } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) -- cgit v1.2.3 From 95db505125fb7bc624b7c3b6747bbeaebbffc2e4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:49:29 -0500 Subject: sata_mv: update ata_qc_from_tag Update the logic in ata_qc_from_tag() to match that used in similar places elsewhere in libata. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 0c25f52249df..181f02127410 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1628,6 +1628,12 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) return NULL; qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc) { + if (qc->tf.flags & ATA_TFLAG_POLLING) + qc = NULL; + else if (!(qc->flags & ATA_QCFLAG_ACTIVE)) + qc = NULL; + } if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) qc = NULL; return qc; -- cgit v1.2.3 From 32cd11a61007511ddb38783deec8bb1aa6735789 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sun, 1 Feb 2009 16:50:32 -0500 Subject: sata_mv: mv_fill_sg fixes v2 Fix mv_fill_sg() to zero out the reserved word (required for ATAPI), and to include a memory barrier. This may also help with problems reported by Jens on the PPC platform. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 181f02127410..9c8ea2c1116d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1364,12 +1364,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) u32 offset = addr & 0xffff; u32 len = sg_len; - if ((offset + sg_len > 0x10000)) + if (offset + len > 0x10000) len = 0x10000 - offset; mv_sg->addr = cpu_to_le32(addr & 0xffffffff); mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); mv_sg->flags_size = cpu_to_le32(len & 0xffff); + mv_sg->reserved = 0; sg_len -= len; addr += len; @@ -1381,6 +1382,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) if (likely(last_sg)) last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + mb(); /* ensure data structure is visible to the chipset */ } static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) -- cgit v1.2.3 From da14265e776f35067045b8555b5f5f7521e50bc4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:51:54 -0500 Subject: sata_mv: introduce support for ATAPI devices Add ATAPI support to sata_mv, using sff DMA for GEN_II chipsets, and plain old PIO for GEN_IIE. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 186 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 9c8ea2c1116d..6f8a49bc4521 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -31,8 +31,6 @@ * * --> Complete a full errata audit for all chipsets to identify others. * - * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -68,7 +66,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.25" +#define DRV_VERSION "1.26" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -126,7 +124,7 @@ enum { MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI, + ATA_FLAG_NCQ, MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, @@ -348,6 +346,12 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ + + BMDMA_CMD_OFS = 0x224, /* bmdma command register */ + BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */ + /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -547,6 +551,15 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); +static unsigned long mv_mode_filter(struct ata_device *dev, + unsigned long xfer_mask); +static void mv_sff_irq_clear(struct ata_port *ap); +static int mv_check_atapi_dma(struct ata_queued_cmd *qc); +static void mv_bmdma_setup(struct ata_queued_cmd *qc); +static void mv_bmdma_start(struct ata_queued_cmd *qc); +static void mv_bmdma_stop(struct ata_queued_cmd *qc); +static u8 mv_bmdma_status(struct ata_port *ap); + /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of * PRDs for 64K boundaries in mv_fill_sg(). @@ -594,6 +607,14 @@ static struct ata_port_operations mv6_ops = { .pmp_softreset = mv_softreset, .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + + .sff_irq_clear = mv_sff_irq_clear, + .check_atapi_dma = mv_check_atapi_dma, + .bmdma_setup = mv_bmdma_setup, + .bmdma_start = mv_bmdma_start, + .bmdma_stop = mv_bmdma_stop, + .bmdma_status = mv_bmdma_status, + .mode_filter = mv_mode_filter, }; static struct ata_port_operations mv_iie_ops = { @@ -1392,6 +1413,167 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) *cmdw = cpu_to_le16(tmp); } +/** + * mv_mode_filter - Allow ATAPI DMA only on GenII chips. + * @dev: device whose xfer modes are being configured. + * + * Only the GenII hardware can use DMA with ATAPI drives. + */ +static unsigned long mv_mode_filter(struct ata_device *adev, + unsigned long xfer_mask) +{ + if (adev->class == ATA_DEV_ATAPI) { + struct mv_host_priv *hpriv = adev->link->ap->host->private_data; + if (!IS_GEN_II(hpriv)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(adev, KERN_INFO, + "ATAPI DMA not supported on this chipset\n"); + } + } + return xfer_mask; +} + +/** + * mv_sff_irq_clear - Clear hardware interrupt after DMA. + * @ap: Port associated with this ATA transaction. + * + * We need this only for ATAPI bmdma transactions, + * as otherwise we experience spurious interrupts + * after libata-sff handles the bmdma interrupts. + */ +static void mv_sff_irq_clear(struct ata_port *ap) +{ + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); +} + +/** + * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. + * @qc: queued command to check for chipset/DMA compatibility. + * + * The bmdma engines cannot handle speculative data sizes + * (bytecount under/over flow). So only allow DMA for + * data transfer commands with known data sizes. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + if (scmd) { + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_SEND_DVD_STRUCTURE: + case GPCMD_SEND_CUE_SHEET: + return 0; /* DMA is safe */ + } + } + return -EOPNOTSUPP; /* use PIO instead */ +} + +/** + * mv_bmdma_setup - Set up BMDMA transaction + * @qc: queued command to prepare DMA for. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + mv_fill_sg(qc); + + /* clear all DMA cmd bits */ + writel(0, port_mmio + BMDMA_CMD_OFS); + + /* load PRD table addr. */ + writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, + port_mmio + BMDMA_PRD_HIGH_OFS); + writelfl(pp->sg_tbl_dma[qc->tag], + port_mmio + BMDMA_PRD_LOW_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * mv_bmdma_start - Start a BMDMA transaction + * @qc: queued command to start DMA on. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; + + /* start host DMA transaction */ + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); +} + +/** + * mv_bmdma_stop - Stop BMDMA transfer + * @qc: queued command to stop DMA on. + * + * Clears the ATA_DMA_START flag in the bmdma control register + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + u32 cmd; + + /* clear start/stop bit */ + cmd = readl(port_mmio + BMDMA_CMD_OFS); + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +/** + * mv_bmdma_status - Read BMDMA status + * @ap: port for which to retrieve DMA status. + * + * Read and return equivalent of the sff BMDMA status register. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_bmdma_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg, status; + + /* + * Other bits are valid only if ATA_DMA_ACTIVE==0, + * and the ATA_DMA_INTR bit doesn't exist. + */ + reg = readl(port_mmio + BMDMA_STATUS_OFS); + if (reg & ATA_DMA_ACTIVE) + status = ATA_DMA_ACTIVE; + else + status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + return status; +} + /** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare -- cgit v1.2.3 From 66e57a2cb0c538d4f84a7233c224735fe1eaa672 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 18:52:58 -0500 Subject: sata_mv: optimize use of mv_edma_cfg Try and avoid unnecessary reconfiguration of the EDMA config register on every single non-EDMA I/O operation, by moving the call to mv_edma_cfg() into mv_stop_edma(). It must then also be invoked from mv_hardreset() and from mv_port_start(). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 6f8a49bc4521..8f356e4417d2 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -979,6 +979,7 @@ static int mv_stop_edma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; + int err = 0; if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) return 0; @@ -986,9 +987,10 @@ static int mv_stop_edma(struct ata_port *ap) mv_wait_for_edma_empty_idle(ap); if (mv_stop_edma_engine(port_mmio)) { ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - return -EIO; + err = -EIO; } - return 0; + mv_edma_cfg(ap, 0, 0); + return err; } #ifdef ATA_DEBUG @@ -1337,6 +1339,7 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + mv_edma_cfg(ap, 0, 0); return 0; out_port_free_dma_mem: @@ -1797,7 +1800,6 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * shadow block, etc registers. */ mv_stop_edma(ap); - mv_edma_cfg(ap, 0, 0); mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); mv_pmp_select(ap, qc->dev->link->pmp); return ata_sff_qc_issue(qc); @@ -2997,6 +2999,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, extra = HZ; /* only extend it once, max */ } } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_edma_cfg(ap, 0, 0); return rc; } -- cgit v1.2.3 From 84bcbeebcfd283c3f4804287ed4610c3a18e1590 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 30 Jan 2009 21:40:48 -0500 Subject: sata_mv: remove leftovers Remove redundant code left over from the earlier patch 04/07. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8f356e4417d2..1f14b1b52340 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1820,8 +1820,6 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) else if (!(qc->flags & ATA_QCFLAG_ACTIVE)) qc = NULL; } - if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) - qc = NULL; return qc; } -- cgit v1.2.3 From 96b34ce7cafa0888580698d199b9fac6ad9f9a2e Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:50 +0100 Subject: pata-rb532-cf: replace rb532_pata_finish_io() Since the delay used internally is just the same as ata_sff_pause() uses, rb532_pata_finish_io() does exactly the same as ata_sff_pause() and thus can be replaced by the later one. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index ebfcda26d639..6fe660b27dc2 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -54,22 +54,11 @@ struct rb532_cf_info { /* ------------------------------------------------------------------------ */ -static inline void rb532_pata_finish_io(struct ata_port *ap) -{ - struct ata_host *ah = ap->host; - struct rb532_cf_info *info = ah->private_data; - - /* FIXME: Keep previous delay. If this is merely a fence then - ata_sff_sync might be sufficient. */ - ata_sff_dma_pause(ap); - ndelay(RB500_CF_IO_DELAY); -} - static void rb532_pata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { writeb(tf->command, ap->ioaddr.command_addr); - rb532_pata_finish_io(ap); + ata_sff_pause(ap); } static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, @@ -87,7 +76,7 @@ static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf = readb(ioaddr); } - rb532_pata_finish_io(adev->link->ap); + ata_sff_pause(ap); return retlen; } -- cgit v1.2.3 From bff9ad3c4c8fff340854d3912196ed470f94602c Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:51 +0100 Subject: pata-rb532-cf: use ata_sff_exec_command() The only difference between rb532_pata_exec_command() and ata_sff_exec_command() is added debugging output, so it can be dropped and the standard op used instead. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 6fe660b27dc2..9d61ce51e4e0 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -54,13 +54,6 @@ struct rb532_cf_info { /* ------------------------------------------------------------------------ */ -static void rb532_pata_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - writeb(tf->command, ap->ioaddr.command_addr); - ata_sff_pause(ap); -} - static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { @@ -112,7 +105,6 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, - .sff_exec_command = rb532_pata_exec_command, .sff_data_xfer = rb532_pata_data_xfer, .freeze = rb532_pata_freeze, .thaw = rb532_pata_thaw, -- cgit v1.2.3 From 180bd147f18316d92bd5f59aebc9932cabc03edd Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:52 +0100 Subject: pata-rb532-cf: use ata_sff_data_xfer32() The biggest difference between rb532_pata_data_xfer() and ata_sff_data_xfer32() is the call to ata_sff_pause() at the end of rb532_pata_data_xfer() which I suppose to be unnecessary since it works without. I've also tested using ata_sff_data_xfer() as replacement, but since we know that the driver supports 32bit IO, using the optimised version should be safe. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 9d61ce51e4e0..9fb91e4dd887 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -54,25 +54,6 @@ struct rb532_cf_info { /* ------------------------------------------------------------------------ */ -static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->link->ap; - void __iomem *ioaddr = ap->ioaddr.data_addr; - int retlen = buflen; - - if (write_data) { - for (; buflen > 0; buflen--, buf++) - writeb(*buf, ioaddr); - } else { - for (; buflen > 0; buflen--, buf++) - *buf = readb(ioaddr); - } - - ata_sff_pause(ap); - return retlen; -} - static void rb532_pata_freeze(struct ata_port *ap) { struct rb532_cf_info *info = ap->host->private_data; @@ -105,7 +86,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, - .sff_data_xfer = rb532_pata_data_xfer, + .sff_data_xfer = ata_sff_data_xfer32, .freeze = rb532_pata_freeze, .thaw = rb532_pata_thaw, }; -- cgit v1.2.3 From 6be976e79db3ba691b657476a8bf4a635e5586f9 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 27 Jan 2009 14:35:53 +0100 Subject: pata-rb532-cf: drop custom freeze and thaw I'm not quite sure what freezing and thawing is used for. Tests showed that the port is being frozen at initialisation state and thawed right afterwards, then the functions were not called anymore. Dropping the complete custom code for handling the frozen state seems to work at least for a standard use case including mounting a partition, copying some files in it (in parallel) and finally removing them and unmounting the partition. Signed-off-by: Phil Sutter Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 9fb91e4dd887..fbfee1bd85ff 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -48,26 +48,11 @@ struct rb532_cf_info { void __iomem *iobase; unsigned int gpio_line; - int frozen; unsigned int irq; }; /* ------------------------------------------------------------------------ */ -static void rb532_pata_freeze(struct ata_port *ap) -{ - struct rb532_cf_info *info = ap->host->private_data; - - info->frozen = 1; -} - -static void rb532_pata_thaw(struct ata_port *ap) -{ - struct rb532_cf_info *info = ap->host->private_data; - - info->frozen = 0; -} - static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) { struct ata_host *ah = dev_instance; @@ -75,8 +60,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) if (gpio_get_value(info->gpio_line)) { set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); - if (!info->frozen) - ata_sff_interrupt(info->irq, dev_instance); + ata_sff_interrupt(info->irq, dev_instance); } else { set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } @@ -87,8 +71,6 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, .sff_data_xfer = ata_sff_data_xfer32, - .freeze = rb532_pata_freeze, - .thaw = rb532_pata_thaw, }; /* ------------------------------------------------------------------------ */ -- cgit v1.2.3 From a5bfc4714b3f01365aef89a92673f2ceb1ccf246 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 23 Jan 2009 11:31:39 +0900 Subject: ahci: drop intx manipulation on msi enable There's no need to turn off intx explicitly on msi enable. This is automatically handled by pci. Drop it. This might be needed on machines if the BIOS turns intx off during boot. However, there's no evidence of such behavior for ahci and the only such case seems to be ICH5 PATA according to ata_piix. Also, given the way ahci operates, it's highly unlikely BIOS ever disables IRQ for the controller. However, as this change has slight possibility of introducing failure, please schedule it for #upstream. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 66e012cd3271..98d7a9fbb7ed 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2647,8 +2647,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; - if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) - pci_intx(pdev, 1); + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) + pci_enable_msi(pdev); /* save initial config */ ahci_save_initial_config(pdev, hpriv); -- cgit v1.2.3 From 08da175937a35d34a83eaefbb3458472eb1a89d4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:13:03 -0500 Subject: [libata] sata_mv: cache frequently-accessed registers Maintain a local (mv_port_priv) cache of frequently accessed registers, to avoid having to re-read them (very slow) on every transistion between EDMA and non-EDMA modes. This speeds up things like flushing the drive write cache, and anything using basic DMA transfers. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 91 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 70 insertions(+), 21 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 1f14b1b52340..146b8e67c44f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -438,6 +438,17 @@ struct mv_sg { __le32 reserved; }; +/* + * We keep a local cache of a few frequently accessed port + * registers here, to avoid having to read them (very slow) + * when switching between EDMA and non-EDMA modes. + */ +struct mv_cached_regs { + u32 fiscfg; + u32 ltmode; + u32 haltcond; +}; + struct mv_port_priv { struct mv_crqb *crqb; dma_addr_t crqb_dma; @@ -450,6 +461,7 @@ struct mv_port_priv { unsigned int resp_idx; u32 pp_flags; + struct mv_cached_regs cached; unsigned int delayed_eh_pmp_map; }; @@ -812,6 +824,43 @@ static inline int mv_get_hc_count(unsigned long port_flags) return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } +/** + * mv_save_cached_regs - (re-)initialize cached port registers + * @ap: the port whose registers we are caching + * + * Initialize the local cache of port registers, + * so that reading them over and over again can + * be avoided on the hotter paths of this driver. + * This saves a few microseconds each time we switch + * to/from EDMA mode to perform (eg.) a drive cache flush. + */ +static void mv_save_cached_regs(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); + pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); + pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); +} + +/** + * mv_write_cached_reg - write to a cached port register + * @addr: hardware address of the register + * @old: pointer to cached value of the register + * @new: new value for the register + * + * Write a new value to a cached register, + * but only if the value is different from before. + */ +static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) +{ + if (new != *old) { + *old = new; + writel(new, addr); + } +} + static void mv_set_edma_ptrs(void __iomem *port_mmio, struct mv_host_priv *hpriv, struct mv_port_priv *pp) @@ -1159,35 +1208,33 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) return ATA_DEFER_PORT; } -static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs) +static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) { - u32 new_fiscfg, old_fiscfg; - u32 new_ltmode, old_ltmode; - u32 new_haltcond, old_haltcond; + struct mv_port_priv *pp = ap->private_data; + void __iomem *port_mmio; - old_fiscfg = readl(port_mmio + FISCFG_OFS); - old_ltmode = readl(port_mmio + LTMODE_OFS); - old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg; + u32 ltmode, *old_ltmode = &pp->cached.ltmode; + u32 haltcond, *old_haltcond = &pp->cached.haltcond; - new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); - new_ltmode = old_ltmode & ~LTMODE_BIT8; - new_haltcond = old_haltcond | EDMA_ERR_DEV; + ltmode = *old_ltmode & ~LTMODE_BIT8; + haltcond = *old_haltcond | EDMA_ERR_DEV; if (want_fbs) { - new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; - new_ltmode = old_ltmode | LTMODE_BIT8; + fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC; + ltmode = *old_ltmode | LTMODE_BIT8; if (want_ncq) - new_haltcond &= ~EDMA_ERR_DEV; + haltcond &= ~EDMA_ERR_DEV; else - new_fiscfg |= FISCFG_WAIT_DEV_ERR; + fiscfg |= FISCFG_WAIT_DEV_ERR; + } else { + fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); } - if (new_fiscfg != old_fiscfg) - writelfl(new_fiscfg, port_mmio + FISCFG_OFS); - if (new_ltmode != old_ltmode) - writelfl(new_ltmode, port_mmio + LTMODE_OFS); - if (new_haltcond != old_haltcond) - writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS); + port_mmio = mv_ap_base(ap); + mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg); + mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode); + mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond); } static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) @@ -1235,7 +1282,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) */ want_fbs &= want_ncq; - mv_config_fbs(port_mmio, want_ncq, want_fbs); + mv_config_fbs(ap, want_ncq, want_fbs); if (want_fbs) { pp->pp_flags |= MV_PP_FLAG_FBS_EN; @@ -1339,6 +1386,7 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + mv_save_cached_regs(ap); mv_edma_cfg(ap, 0, 0); return 0; @@ -2997,6 +3045,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, extra = HZ; /* only extend it once, max */ } } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_save_cached_regs(ap); mv_edma_cfg(ap, 0, 0); return rc; -- cgit v1.2.3 From c01e8a23128c746f23088db836bd4c820f3eb0b4 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:14:48 -0500 Subject: [libata] sata_mv: Enable use of (basic) DMA for ATAPI on GEN_IIE chips This also gets rid of any need for mv_mode_filter(). Using basic DMA on GEN_IIE requires setting an undocumented bit in an undocumented register. For safety, we clear that bit again when switching back to EDMA mode. To avoid a performance penalty when switching modes, we cache the register in port_priv, as already done for other regs. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 52 +++++++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 24 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 146b8e67c44f..3bfe721ba766 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -345,7 +345,7 @@ enum { EDMA_ARB_CFG_OFS = 0x38, EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - + EDMA_UNKNOWN_RSVD_OFS = 0x6C, /* GenIIe unknown/reserved */ BMDMA_CMD_OFS = 0x224, /* bmdma command register */ BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ @@ -447,6 +447,7 @@ struct mv_cached_regs { u32 fiscfg; u32 ltmode; u32 haltcond; + u32 unknown_rsvd; }; struct mv_port_priv { @@ -563,8 +564,6 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); -static unsigned long mv_mode_filter(struct ata_device *dev, - unsigned long xfer_mask); static void mv_sff_irq_clear(struct ata_port *ap); static int mv_check_atapi_dma(struct ata_queued_cmd *qc); static void mv_bmdma_setup(struct ata_queued_cmd *qc); @@ -626,7 +625,6 @@ static struct ata_port_operations mv6_ops = { .bmdma_start = mv_bmdma_start, .bmdma_stop = mv_bmdma_stop, .bmdma_status = mv_bmdma_status, - .mode_filter = mv_mode_filter, }; static struct ata_port_operations mv_iie_ops = { @@ -842,6 +840,7 @@ static void mv_save_cached_regs(struct ata_port *ap) pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS); } /** @@ -1252,6 +1251,30 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); } +/** + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized + * + * There are two DMA modes on these chips: basic DMA, and EDMA. + * + * Bit-0 of the "EDMA RESERVED" register enables/disables use + * of basic DMA on the GEN_IIE versions of the chips. + * + * This bit survives EDMA resets, and must be set for basic DMA + * to function, and should be cleared when EDMA is active. + */ +static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) +{ + struct mv_port_priv *pp = ap->private_data; + u32 new, *old = &pp->cached.unknown_rsvd; + + if (enable_bmdma) + new = *old | 1; + else + new = *old & ~1; + mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); +} + static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; @@ -1297,6 +1320,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) } if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ + mv_bmdma_enable_iie(ap, !want_edma); } if (want_ncq) { @@ -1464,26 +1488,6 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) *cmdw = cpu_to_le16(tmp); } -/** - * mv_mode_filter - Allow ATAPI DMA only on GenII chips. - * @dev: device whose xfer modes are being configured. - * - * Only the GenII hardware can use DMA with ATAPI drives. - */ -static unsigned long mv_mode_filter(struct ata_device *adev, - unsigned long xfer_mask) -{ - if (adev->class == ATA_DEV_ATAPI) { - struct mv_host_priv *hpriv = adev->link->ap->host->private_data; - if (!IS_GEN_II(hpriv)) { - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - ata_dev_printk(adev, KERN_INFO, - "ATAPI DMA not supported on this chipset\n"); - } - } - return xfer_mask; -} - /** * mv_sff_irq_clear - Clear hardware interrupt after DMA. * @ap: Port associated with this ATA transaction. -- cgit v1.2.3 From 42ed893d8011264f9945c2f54055b47c298ac53e Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:15:39 -0500 Subject: [libata] sata_mv: Tighten up interrupt masking in mv_qc_issue() so that it doesn't miss any protocols. Handle future cases where a qc is specially marked for polled issue or where a particular chip version prefers interrupts over polling for PIO. This mimics the polling decision logic from ata_sff_qc_issue(). Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3bfe721ba766..b74af945a2fe 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1809,7 +1809,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; - unsigned int port_irqs = DONE_IRQ | ERR_IRQ; + unsigned int port_irqs; switch (qc->tf.protocol) { case ATA_PROT_DMA: @@ -1842,20 +1842,28 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) "this may fail due to h/w errata\n"); } /* drop through */ + case ATA_PROT_NODATA: case ATAPI_PROT_PIO: - port_irqs = ERR_IRQ; /* leave DONE_IRQ masked for PIO */ - /* drop through */ - default: - /* - * We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_edma(ap); - mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); - mv_pmp_select(ap, qc->dev->link->pmp); - return ata_sff_qc_issue(qc); + case ATAPI_PROT_NODATA: + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + break; } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + port_irqs = ERR_IRQ; /* mask device interrupt when polling */ + else + port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ + + /* + * We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_edma(ap); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); + mv_pmp_select(ap, qc->dev->link->pmp); + return ata_sff_qc_issue(qc); } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) -- cgit v1.2.3 From d16ab3f633b75aac1cf42b00355cd9aa65033dcc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:17:43 -0500 Subject: [libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv. This is necessary for use with the upcoming "mv_qc_issue_fis()" patch, but is being added separately here for easier code review. When using command issue via the "mv_qc_issue_fis()" mechanism, the initial ATA_BUSY bit does not show in the ATA status (shadow) register. This can confuse libata! So here we add a hook to fake ATA_BUSY for that situation, until the first time a BUSY, DRQ, or ERR bit is seen. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b74af945a2fe..542e244f37ab 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -370,6 +370,7 @@ enum { MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ + MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -570,6 +571,7 @@ static void mv_bmdma_setup(struct ata_queued_cmd *qc); static void mv_bmdma_start(struct ata_queued_cmd *qc); static void mv_bmdma_stop(struct ata_queued_cmd *qc); static u8 mv_bmdma_status(struct ata_port *ap); +static u8 mv_sff_check_status(struct ata_port *ap); /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of @@ -619,6 +621,7 @@ static struct ata_port_operations mv6_ops = { .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + .sff_check_status = mv_sff_check_status, .sff_irq_clear = mv_sff_irq_clear, .check_atapi_dma = mv_check_atapi_dma, .bmdma_setup = mv_bmdma_setup, @@ -1284,7 +1287,8 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN); + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1790,6 +1794,33 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) mv_fill_sg(qc); } +/** + * mv_sff_check_status - fetch device status, if valid + * @ap: ATA port to fetch status from + * + * When using command issue via mv_qc_issue_fis(), + * the initial ATA_BUSY state does not show up in the + * ATA status (shadow) register. This can confuse libata! + * + * So we have a hook here to fake ATA_BUSY for that situation, + * until the first time a BUSY, DRQ, or ERR bit is seen. + * + * The rest of the time, it simply returns the ATA status register. + */ +static u8 mv_sff_check_status(struct ata_port *ap) +{ + u8 stat = ioread8(ap->ioaddr.status_addr); + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { + if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; + else + stat = ATA_BUSY; + } + return stat; +} + /** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start @@ -1811,6 +1842,8 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) u32 in_index; unsigned int port_irqs; + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ + switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NCQ: @@ -3038,6 +3071,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, mv_reset_channel(hpriv, mmio, ap->port_no); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); /* Workaround for errata FEr SATA#10 (part 2) */ do { -- cgit v1.2.3 From 1a660164c291f41b2aa853a7269b310933574ef9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:18:32 -0500 Subject: [libata] Export ata_pio_queue_task() so that it can be used from sata_mv. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + drivers/ata/libata.h | 2 -- include/linux/libata.h | 3 +++ 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 060bcd601f57..d4a7b8a96ecd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6709,6 +6709,7 @@ EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_do_dev_read_id); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_pio_queue_task); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index cea8014cd87e..89a1e0018e71 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -79,8 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); -extern void ata_pio_queue_task(struct ata_port *ap, void *data, - unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, diff --git a/include/linux/libata.h b/include/linux/libata.h index dc18b87ed722..19af7d22a7f8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1008,6 +1008,9 @@ extern int ata_cable_sata(struct ata_port *ap); extern int ata_cable_ignore(struct ata_port *ap); extern int ata_cable_unknown(struct ata_port *ap); +extern void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay); + /* Timing helpers */ extern unsigned int ata_pio_need_iordy(const struct ata_device *); extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode); -- cgit v1.2.3 From 70f8b79cf3a2eb892a01271fdfbb1903c0c982a8 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:19:20 -0500 Subject: [libata] sata_mv: Implement direct FIS transmission via mv_qc_issue_fis(). This is initially needed to work around NCQ errata, whereby the READ_LOG_EXT command sometimes fails when issued in the traditional (sff) fashion. Portions of this code will likely be reused for implementation of the target mode feature later on. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 542e244f37ab..8cad3b2fe554 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1821,6 +1821,105 @@ static u8 mv_sff_check_status(struct ata_port *ap) return stat; } +/** + * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register + * @fis: fis to be sent + * @nwords: number of 32-bit words in the fis + */ +static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 ifctl, old_ifctl, ifstat; + int i, timeout = 200, final_word = nwords - 1; + + /* Initiate FIS transmission mode */ + old_ifctl = readl(port_mmio + SATA_IFCTL_OFS); + ifctl = 0x100 | (old_ifctl & 0xf); + writelfl(ifctl, port_mmio + SATA_IFCTL_OFS); + + /* Send all words of the FIS except for the final word */ + for (i = 0; i < final_word; ++i) + writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* Flag end-of-transmission, and then send the final word */ + writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS); + writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* + * Wait for FIS transmission to complete. + * This typically takes just a single iteration. + */ + do { + ifstat = readl(port_mmio + SATA_IFSTAT_OFS); + } while (!(ifstat & 0x1000) && --timeout); + + /* Restore original port configuration */ + writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS); + + /* See if it worked */ + if ((ifstat & 0x3000) != 0x1000) { + ata_port_printk(ap, KERN_WARNING, + "%s transmission error, ifstat=%08x\n", + __func__, ifstat); + return AC_ERR_OTHER; + } + return 0; +} + +/** + * mv_qc_issue_fis - Issue a command directly as a FIS + * @qc: queued command to start + * + * Note that the ATA shadow registers are not updated + * after command issue, so the device will appear "READY" + * if polled, even while it is BUSY processing the command. + * + * So we use a status hook to fake ATA_BUSY until the drive changes state. + * + * Note: we don't get updated shadow regs on *completion* + * of non-data commands. So avoid sending them via this function, + * as they will appear to have completed immediately. + * + * GEN_IIE has special registers that we could get the result tf from, + * but earlier chipsets do not. For now, we ignore those registers. + */ +static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct ata_link *link = qc->dev->link; + u32 fis[5]; + int err = 0; + + ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis); + err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0])); + if (err) + return err; + + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + /* fall through */ + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_FIRST; + break; + case ATA_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + if (qc->tf.flags & ATA_TFLAG_WRITE) + ap->hsm_task_state = HSM_ST_FIRST; + else + ap->hsm_task_state = HSM_ST; + break; + default: + ap->hsm_task_state = HSM_ST_LAST; + break; + } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + return 0; +} + /** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start @@ -1896,6 +1995,23 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) mv_stop_edma(ap); mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); mv_pmp_select(ap, qc->dev->link->pmp); + + if (qc->tf.command == ATA_CMD_READ_LOG_EXT) { + struct mv_host_priv *hpriv = ap->host->private_data; + /* + * Workaround for 88SX60x1 FEr SATA#25 (part 2). + * + * After any NCQ error, the READ_LOG_EXT command + * from libata-eh *must* use mv_qc_issue_fis(). + * Otherwise it might fail, due to chip errata. + * + * Rather than special-case it, we'll just *always* + * use this method here for READ_LOG_EXT, making for + * easier testing. + */ + if (IS_GEN_II(hpriv)) + return mv_qc_issue_fis(qc); + } return ata_sff_qc_issue(qc); } -- cgit v1.2.3 From d2f9c0614e664708978c53eca4a5963e92830e88 Mon Sep 17 00:00:00 2001 From: Maciej Rutecki Date: Fri, 20 Mar 2009 00:06:46 +0100 Subject: ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off Blacklist HP Compaq 6720s so that it doesn't play a "spin down, spin up, spin down" ping-pong with the hard disk during system power off. Signed-off-by: Maciej Rutecki Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 98d7a9fbb7ed..699789bc9ea6 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2565,6 +2565,15 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev) /* PCI slot number of the controller */ .driver_data = (void *)0x1FUL, }, + { + .ident = "HP Compaq 6720s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, { } /* terminate list */ }; -- cgit v1.2.3 From 22ddbd1e036ce035c1cccb2496aefafac79aba2c Mon Sep 17 00:00:00 2001 From: Erik Inge Bolsø Date: Sat, 14 Mar 2009 21:37:48 +0100 Subject: include/linux/ata.h: add some more transfer masks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik --- include/linux/ata.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/linux/ata.h b/include/linux/ata.h index 9a061accd8b8..3901b0022cda 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -108,6 +108,8 @@ enum { ATA_PIO5 = ATA_PIO4 | (1 << 5), ATA_PIO6 = ATA_PIO5 | (1 << 6), + ATA_PIO4_ONLY = (1 << 4), + ATA_SWDMA0 = (1 << 0), ATA_SWDMA1 = ATA_SWDMA0 | (1 << 1), ATA_SWDMA2 = ATA_SWDMA1 | (1 << 2), @@ -117,6 +119,8 @@ enum { ATA_MWDMA0 = (1 << 0), ATA_MWDMA1 = ATA_MWDMA0 | (1 << 1), ATA_MWDMA2 = ATA_MWDMA1 | (1 << 2), + ATA_MWDMA3 = ATA_MWDMA2 | (1 << 3), + ATA_MWDMA4 = ATA_MWDMA3 | (1 << 4), ATA_MWDMA12_ONLY = (1 << 1) | (1 << 2), ATA_MWDMA2_ONLY = (1 << 2), @@ -131,6 +135,8 @@ enum { ATA_UDMA7 = ATA_UDMA6 | (1 << 7), /* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */ + ATA_UDMA24_ONLY = (1 << 2) | (1 << 4), + ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */ /* DMA-related */ -- cgit v1.2.3 From 14bdef982caeda19afe34010482867c18217c641 Mon Sep 17 00:00:00 2001 From: Erik Inge Bolsø Date: Sat, 14 Mar 2009 21:38:24 +0100 Subject: [libata] convert drivers to use ata.h mode mask defines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit No functional changes in this patch. Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 16 +++++----- drivers/ata/ata_generic.c | 4 +-- drivers/ata/ata_piix.c | 60 +++++++++++++++++------------------ drivers/ata/pata_acpi.c | 6 ++-- drivers/ata/pata_ali.c | 28 ++++++++--------- drivers/ata/pata_amd.c | 70 ++++++++++++++++++++--------------------- drivers/ata/pata_artop.c | 16 +++++----- drivers/ata/pata_at32.c | 4 ++- drivers/ata/pata_atiixp.c | 6 ++-- drivers/ata/pata_bf54x.c | 2 +- drivers/ata/pata_cmd640.c | 2 +- drivers/ata/pata_cmd64x.c | 24 +++++++------- drivers/ata/pata_cs5520.c | 2 +- drivers/ata/pata_cs5530.c | 8 ++--- drivers/ata/pata_cs5535.c | 4 +-- drivers/ata/pata_cs5536.c | 4 +-- drivers/ata/pata_cypress.c | 4 +-- drivers/ata/pata_efar.c | 6 ++-- drivers/ata/pata_hpt366.c | 4 +-- drivers/ata/pata_hpt37x.c | 28 ++++++++--------- drivers/ata/pata_hpt3x2n.c | 4 +-- drivers/ata/pata_hpt3x3.c | 6 ++-- drivers/ata/pata_icside.c | 4 +-- drivers/ata/pata_isapnp.c | 2 +- drivers/ata/pata_it8213.c | 4 +-- drivers/ata/pata_it821x.c | 16 +++++----- drivers/ata/pata_ixp4xx_cf.c | 2 +- drivers/ata/pata_jmicron.c | 4 +-- drivers/ata/pata_legacy.c | 2 +- drivers/ata/pata_marvell.c | 8 ++--- drivers/ata/pata_mpc52xx.c | 4 +-- drivers/ata/pata_mpiix.c | 2 +- drivers/ata/pata_netcell.c | 4 +-- drivers/ata/pata_ninja32.c | 2 +- drivers/ata/pata_ns87410.c | 2 +- drivers/ata/pata_ns87415.c | 8 ++--- drivers/ata/pata_octeon_cf.c | 4 +-- drivers/ata/pata_oldpiix.c | 4 +-- drivers/ata/pata_opti.c | 2 +- drivers/ata/pata_optidma.c | 10 +++--- drivers/ata/pata_pcmcia.c | 2 +- drivers/ata/pata_pdc2027x.c | 12 +++---- drivers/ata/pata_pdc202xx_old.c | 12 +++---- drivers/ata/pata_qdi.c | 4 +-- drivers/ata/pata_radisys.c | 6 ++-- drivers/ata/pata_rb532_cf.c | 2 +- drivers/ata/pata_rz1000.c | 2 +- drivers/ata/pata_sc1200.c | 6 ++-- drivers/ata/pata_scc.c | 4 +-- drivers/ata/pata_sch.c | 6 ++-- drivers/ata/pata_serverworks.c | 20 ++++++------ drivers/ata/pata_sil680.c | 8 ++--- drivers/ata/pata_sis.c | 32 +++++++++++-------- drivers/ata/pata_sl82c105.c | 6 ++-- drivers/ata/pata_triflex.c | 4 +-- drivers/ata/pata_via.c | 24 +++++++------- drivers/ata/pata_winbond.c | 2 +- drivers/ata/pdc_adma.c | 2 +- drivers/ata/sata_fsl.c | 4 +-- drivers/ata/sata_inic162x.c | 4 +-- drivers/ata/sata_nv.c | 6 ++-- drivers/ata/sata_promise.c | 28 ++++++++--------- drivers/ata/sata_qstor.c | 2 +- drivers/ata/sata_sil.c | 16 +++++----- drivers/ata/sata_sil24.c | 18 +++++------ drivers/ata/sata_sis.c | 4 +-- drivers/ata/sata_svw.c | 16 +++++----- drivers/ata/sata_sx4.c | 4 +-- drivers/ata/sata_uli.c | 2 +- drivers/ata/sata_via.c | 16 +++++----- drivers/ata/sata_vsc.c | 4 +-- 71 files changed, 339 insertions(+), 331 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 699789bc9ea6..ec2922ad2dc0 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -404,7 +404,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -412,7 +412,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, @@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -430,7 +430,7 @@ static const struct ata_port_info ahci_port_info[] = { AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, @@ -440,7 +440,7 @@ static const struct ata_port_info ahci_port_info[] = { AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -448,7 +448,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, @@ -456,7 +456,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -464,7 +464,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index dc48a6398abe..ecfd22b4f1ce 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -118,8 +118,8 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id u16 command; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &generic_port_ops }; diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index ef8b30d577bd..e5cbe80ce172 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -446,34 +446,34 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .port_ops = &piix_pata_ops, }, [piix_pata_33] = /* PIIX4 at 33MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_pata_ops, }, [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* Check: maybe 0x07 */ - .udma_mask = ATA_UDMA2, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok */ + .udma_mask = ATA_UDMA2, .port_ops = &ich_pata_ops, }, [ich_pata_66] = /* ICH controllers up to 66MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */ .udma_mask = ATA_UDMA4, .port_ops = &ich_pata_ops, }, @@ -481,17 +481,17 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_100] = { .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &ich_pata_ops, }, [ich5_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -499,8 +499,8 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -508,8 +508,8 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -517,8 +517,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -526,8 +526,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -535,8 +535,8 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -544,8 +544,8 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -553,9 +553,9 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_vmw] = { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_vmw_ops, }, diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index 8b77a9802df1..d8f35fe44421 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -246,9 +246,9 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x7f, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &pacpi_ops, }; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index eb99dbe78081..751b7ea4816c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -492,53 +492,53 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &ali_early_port_ops }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &ali_c2_port_ops }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &ali_c2_port_ops }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &ali_c4_port_ops }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &ali_c5_port_ops }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 115b1cd6dcf5..33a74f11171c 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -455,74 +455,74 @@ static void amd_clear_fifo(struct pci_dev *pdev) static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { - { /* 0: AMD 7401 */ + { /* 0: AMD 7401 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, /* No SWDMA */ - .udma_mask = 0x07, /* UDMA 33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &amd33_port_ops }, { /* 1: Early AMD7409 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &amd66_port_ops }, - { /* 2: AMD 7409, no swdma errata */ + { /* 2: AMD 7409 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &amd66_port_ops }, { /* 3: AMD 7411 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops }, { /* 4: AMD 7441 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops }, - { /* 5: AMD 8111*/ + { /* 5: AMD 8111 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &amd133_port_ops }, - { /* 6: AMD 8111 UDMA 100 (Serenade) */ + { /* 6: AMD 8111 UDMA 100 (Serenade) - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd133_port_ops }, { /* 7: Nvidia Nforce */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &nv100_port_ops }, - { /* 8: Nvidia Nforce2 and later */ + { /* 8: Nvidia Nforce2 and later - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &nv133_port_ops }, { /* 9: AMD CS5536 (Geode companion) */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops } }; diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 6b3092c75ffe..07c7fae6da13 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -323,29 +323,29 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; static const struct ata_port_info info_6210 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &artop6210_ops, }; static const struct ata_port_info info_626x = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &artop6260_ops, }; static const struct ata_port_info info_628x = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &artop6260_ops, }; static const struct ata_port_info info_628x_fast = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &artop6260_ops, }; diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c index ab61095093b9..5c129f99a7e3 100644 --- a/drivers/ata/pata_at32.c +++ b/drivers/ata/pata_at32.c @@ -67,7 +67,9 @@ * * Alter PIO_MASK below according to table to set maximal PIO mode. */ -#define PIO_MASK (0x1f) +enum { + PIO_MASK = ATA_PIO4, +}; /* * Struct containing private information about device. diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 506adde8ebb3..bec0b8ade66d 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -220,9 +220,9 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x06, /* No MWDMA0 support */ - .udma_mask = 0x3F, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &atiixp_port_ops }; static const struct pci_bits atiixp_enable_bits[] = { diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 1050fed96b2b..c4b47a3e5446 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1502,7 +1502,7 @@ static struct ata_port_info bfin_port_info[] = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .mwdma_mask = 0, .udma_mask = 0, .port_ops = &bfin_pata_ops, diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 34a394264c3d..5acf9fa9b39f 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -211,7 +211,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cmd640_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 3167d8fed2f2..f98dffedf4bc 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -299,40 +299,40 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with broken UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with working UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 rev 1 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd646r1_port_ops }, { /* CMD 648 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cmd648_port_ops }, { /* CMD 649 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cmd648_port_ops } diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 1186bcd2781c..db6a96984f3f 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -158,7 +158,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; struct ata_port_info pi = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cs5520_port_ops, }; const struct ata_port_info *ppi[2]; diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index bba453381f44..c974b05e4129 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -298,15 +298,15 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &cs5530_port_ops }; /* The docking connector doesn't do UDMA, and it seems not MWDMA */ static const struct ata_port_info info_palmax_secondary = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cs5530_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 8b236af84c2e..d33aa28239a9 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -181,8 +181,8 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cs5535_port_ops }; diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index afed92976198..6da4cb486c8d 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -241,8 +241,8 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cs5536_port_ops, }; diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index d546425cd380..8fb040bf7361 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -124,8 +124,8 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cy82c693_port_ops }; const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index ac6392ea35b0..bd498cc3920e 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -251,9 +251,9 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ - .udma_mask = 0x0f, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ + .udma_mask = ATA_UDMA3, /* UDMA 66 */ .port_ops = &efar_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 65c28e5a6cd7..d7f2da127d13 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -336,8 +336,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_hpt366 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &hpt366_port_ops }; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 42163998de9a..81ab57003aba 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -753,55 +753,55 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370_33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a_33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; /* HPT371, 372 and friends - UDMA133 */ static const struct ata_port_info info_hpt372 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; /* HPT374 - UDMA100, function 1 uses different prereset method */ static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt372_port_ops }; static const struct ata_port_info info_hpt374_fn1 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt374_fn1_port_ops }; diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index d5c9fd7b82bb..3d59fe0a408d 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -441,8 +441,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* HPT372N and friends - UDMA133 */ static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt3x2n_port_ops }; diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index f19cc645881a..7e310253b36b 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -188,11 +188,11 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, #if defined(CONFIG_PATA_HPT3X3_DMA) /* Further debug needed */ - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, #endif .port_ops = &hpt3x3_port_ops }; diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index cf9e9848f8b5..e7347db5b6c4 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -297,7 +297,7 @@ static int icside_dma_init(struct pata_icside_info *info) if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { state->dma = ec->dma; - info->mwdma_mask = 0x07; /* MW0..2 */ + info->mwdma_mask = ATA_MWDMA2; } return 0; @@ -473,7 +473,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info) for (i = 0; i < info->nr_ports; i++) { struct ata_port *ap = host->ports[i]; - ap->pio_mask = 0x1f; + ap->pio_mask = ATA_PIO4; ap->mwdma_mask = info->mwdma_mask; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ops = &pata_icside_port_ops; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 15cdb9148aab..afa8f704271e 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -66,7 +66,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap = host->ports[0]; ap->ops = &isapnp_port_ops; - ap->pio_mask = 1; + ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index c113d7c079c8..f156da8076f7 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -262,8 +262,8 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */ .port_ops = &it8213_ops, }; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index b05b86a912c5..188bc2fcd22c 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -875,29 +875,29 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info info_smart = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_smart_port_ops }; static const struct ata_port_info info_passthru = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_passthru_port_ops }; static const struct ata_port_info info_rdc = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_rdc_port_ops }; static const struct ata_port_info info_rdc_11 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* No UDMA */ .port_ops = &it821x_rdc_port_ops }; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index b173c157ab00..19fdecf319a6 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -176,7 +176,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) ap = host->ports[0]; ap->ops = &ixp4xx_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; ixp4xx_setup_port(ap, data, cs0->start, cs1->start); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 38cf1ab2d289..3a1474ac8838 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -136,8 +136,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &jmicron_ops, diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index e3bc1b436284..3f830f0fe2cc 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -129,7 +129,7 @@ static int qdi; /* Set to probe QDI controllers */ static int winbond; /* Set to probe Winbond controllers, give I/O port if non standard */ static int autospeed; /* Chip present which snoops speed changes */ -static int pio_mask = 0x1F; /* PIO range for autospeed devices */ +static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 76e399bf8c1b..2096fb737f82 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -126,8 +126,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &marvell_ops, @@ -136,8 +136,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i /* Slave possible as its magically mapped not real */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &marvell_ops, diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 50ae6d13078a..68d27bc70d06 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -737,10 +737,10 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) */ prop = of_get_property(op->node, "mwdma-mode", &proplen); if ((prop) && (proplen >= 4)) - mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1); prop = of_get_property(op->node, "udma-mode", &proplen); if ((prop) && (proplen >= 4)) - udma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1); ata_irq = irq_of_parse_and_map(op->node, 0); if (ata_irq == NO_IRQ) { diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index aa576cac4d17..b21f0021f54a 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -200,7 +200,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) the MPIIX your box goes castors up */ ap->ops = &mpiix_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 9dc05e1656a8..bdb236957cb9 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -51,8 +51,8 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e .flags = ATA_FLAG_SLAVE_POSS, /* Actually we don't really care about these as the firmware deals with it */ - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, /* UDMA 133 */ .port_ops = &netcell_ops, }; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4dd9a3b031e4..0fb6b1b1e634 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -136,7 +136,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!base) return -ENOMEM; ap->ops = &ninja32_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = base + 0x10; diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 40d411c460de..ca53fac06717 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -144,7 +144,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x0F, + .pio_mask = ATA_PIO3, .port_ops = &ns87410_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index 89bf5f865d6a..773b1590b492 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -346,8 +346,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ns87415_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; @@ -355,8 +355,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e #if defined(CONFIG_SUPERIO) static const struct ata_port_info info87560 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ns87560_pata_ops, }; diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 0fe4ef309c62..efe2c1985af3 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -871,7 +871,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) ap->private_data = cf_port; cf_port->ap = ap; ap->ops = &octeon_cf_ops; - ap->pio_mask = 0x7f; /* Support PIO 0-6 */ + ap->pio_mask = ATA_PIO6; ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING; @@ -900,7 +900,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) ap->ioaddr.ctl_addr = cs1 + (6 << 1) + 1; octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16; - ap->mwdma_mask = 0x1f; /* Support MWDMA 0-4 */ + ap->mwdma_mask = ATA_MWDMA4; irq = platform_get_irq(pdev, 0); irq_handler = octeon_cf_interrupt; diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 2c1a91c40c1a..84ac5033ac89 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -238,8 +238,8 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &oldpiix_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index e4fa4d565e96..99eddda2d2e5 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -163,7 +163,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &opti_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 93bb6e91973f..86885a445f97 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -399,15 +399,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_82c700 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &optidma_port_ops }; static const struct ata_port_info info_82c700_udma = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &optiplus_port_ops }; const struct ata_port_info *ppi[] = { &info_82c700, NULL }; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 64b2e2281ee7..a5cbcc280b23 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -299,7 +299,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) ap = host->ports[p]; ap->ops = ops; - ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = io_addr + 0x10 * p; ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index e94efccaa482..ca5cad0fd80b 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -152,18 +152,18 @@ static struct ata_port_info pdc2027x_port_info[] = { { .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &pdc2027x_pata100_ops, }, /* PDC_UDMA_133 */ { .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA6, /* udma0-6 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &pdc2027x_pata133_ops, }, }; diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 799a6a098712..5fedb3d4032b 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -291,22 +291,22 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id static const struct ata_port_info info[3] = { { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &pdc2024x_port_ops }, { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &pdc2026x_port_ops }, { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &pdc2026x_port_ops } diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index f1b26f7c8e4d..45879dc6fa41 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -212,11 +212,11 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i if (type == 6580) { ap->ops = &qdi6580_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; } else { ap->ops = &qdi6500_port_ops; - ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ + ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */ ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; } diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 695d44ae52c6..1956d5c03a7f 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -216,9 +216,9 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ - .udma_mask = 0x14, /* UDMA33/66 only */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ + .udma_mask = ATA_UDMA24_ONLY, .port_ops = &radisys_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index fbfee1bd85ff..2f3b49cc4970 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -89,7 +89,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap = ah->ports[0]; ap->ops = &rb532_pata_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ + ap->pio_mask = ATA_PIO4; ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 46d6bc1bf1e9..0c574c065c62 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -88,7 +88,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &rz1000_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 9a4bdca54616..36a0c3593297 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -205,9 +205,9 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &sc1200_port_ops }; /* Can't enable port 2 yet, see top comments */ diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index d447f1cb46ec..4257d6b40af4 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -1001,8 +1001,8 @@ static struct ata_port_operations scc_pata_ops = { static struct ata_port_info scc_port_info[] = { { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x00, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &scc_pata_ops, }, diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index 6aeeeeb34124..99cceb458e2a 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -84,9 +84,9 @@ static struct ata_port_operations sch_pata_ops = { static struct ata_port_info sch_port_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, /* pio0-4 */ - .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sch_pata_ops, }; diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 8d2fd9dd40c7..beaed12d50e4 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -398,26 +398,26 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id static const struct ata_port_info info[4] = { { /* OSB4 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &serverworks_osb4_port_ops }, { /* OSB4 no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x00, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ .port_ops = &serverworks_osb4_port_ops }, { /* CSB5 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &serverworks_csb_port_ops }, { /* CSB5 - later revisions*/ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &serverworks_csb_port_ops } diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 9e764e5747e6..4cb649d8d38c 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -282,15 +282,15 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sil680_port_ops }; static const struct ata_port_info info_slow = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil680_port_ops }; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 27ceb42a774b..488e77bcd22b 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -552,51 +552,57 @@ static struct ata_port_operations sis_old_ops = { static const struct ata_port_info sis_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, - .udma_mask = 0, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ .port_ops = &sis_old_ops, }; static const struct ata_port_info sis_info33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA2, /* UDMA 33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &sis_old_ops, }; static const struct ata_port_info sis_info66 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA4, .port_ops = &sis_66_ops, }; static const struct ata_port_info sis_info100 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA5, .port_ops = &sis_100_ops, }; static const struct ata_port_info sis_info100_early = { .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA5, - .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; static const struct ata_port_info sis_info133 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; const struct ata_port_info sis_info133_for_sata = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_for_sata_ops, }; static const struct ata_port_info sis_info133_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_early_ops, }; diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 1b0e7b6d8ef5..29f733c32066 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -283,13 +283,13 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id { static const struct ata_port_info info_dma = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &sl82c105_port_ops }; static const struct ata_port_info info_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &sl82c105_port_ops }; /* for now use only the first port */ diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index ef9597517cdd..f1f13ff222fd 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -191,8 +191,8 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &triflex_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index ba556d3e6963..b08e6e0f82b6 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -422,46 +422,46 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Early VIA without UDMA support */ static const struct ata_port_info via_mwdma_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops }; /* Ditto with IRQ masking required */ static const struct ata_port_info via_mwdma_info_borked = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops_noirq, }; /* VIA UDMA 33 devices (and borked 66) */ static const struct ata_port_info via_udma33_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &via_port_ops }; /* VIA UDMA 66 devices */ static const struct ata_port_info via_udma66_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &via_port_ops }; /* VIA UDMA 100 devices */ static const struct ata_port_info via_udma100_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &via_port_ops }; /* UDMA133 with bad AST (All current 133) */ static const struct ata_port_info via_udma133_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */ .port_ops = &via_port_ops }; diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 319e164a3d74..6d8619b6f670 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -193,7 +193,7 @@ static __init int winbond_init_one(unsigned long port) ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); ap->ops = &winbond_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; ap->ioaddr.altstatus_addr = ctl_addr; diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index be53545c9f64..c509c206a459 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -166,7 +166,7 @@ static struct ata_port_info adma_port_info[] = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ + .pio_mask = ATA_PIO4_ONLY, .udma_mask = ATA_UDMA4, .port_ops = &adma_ata_ops, }, diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 55bc88c1707b..c2e90e1fece0 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1279,8 +1279,8 @@ static struct ata_port_operations sata_fsl_ops = { static const struct ata_port_info sata_fsl_port_info[] = { { .flags = SATA_FSL_HOST_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .udma_mask = 0x7f, /* udma 0-6 */ + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, .port_ops = &sata_fsl_ops, }, }; diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index fbbd87c96f10..305a4f825f53 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -744,8 +744,8 @@ static struct ata_port_operations inic_port_ops = { static struct ata_port_info inic_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &inic_port_ops }; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index f65b53785a8f..2f523f8c27f6 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -57,9 +57,9 @@ enum { NV_MMIO_BAR = 5, NV_PORTS = 2, - NV_PIO_MASK = 0x1f, - NV_MWDMA_MASK = 0x07, - NV_UDMA_MASK = 0x7f, + NV_PIO_MASK = ATA_PIO4, + NV_MWDMA_MASK = ATA_MWDMA2, + NV_UDMA_MASK = ATA_UDMA6, NV_PORT0_SCR_REG_OFFSET = 0x00, NV_PORT1_SCR_REG_OFFSET = 0x40, diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index ba9a2570a742..3ad2b8863636 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -213,8 +213,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_SATA_PATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_old_sata_ops, }, @@ -222,8 +222,8 @@ static const struct ata_port_info pdc_port_info[] = { [board_2037x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -232,8 +232,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_old_sata_ops, }, @@ -242,8 +242,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -252,8 +252,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_sata_ops, }, @@ -262,8 +262,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_GEN_II, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -272,8 +272,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_sata_ops, }, diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index a000c86ac859..7112d89fd9ff 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -160,7 +160,7 @@ static const struct ata_port_info qs_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ + .pio_mask = ATA_PIO4_ONLY, .udma_mask = ATA_UDMA6, .port_ops = &qs_ata_ops, }, diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index d0091609e210..e67ce8e5caa5 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -200,8 +200,8 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, @@ -209,24 +209,24 @@ static const struct ata_port_info sil_port_info[] = { { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3512 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3114 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 2590c2279fa7..0d8990dcdfcd 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -429,25 +429,25 @@ static const struct ata_port_info sil24_port_info[] = { { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3132 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3131/sil_3531 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, }; diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 9c43b4e7c4a6..8f9833228619 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -97,8 +97,8 @@ static struct ata_port_operations sis_ops = { static const struct ata_port_info sis_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x7, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sis_ops, }; diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 609d147813ae..7257f2d5c52c 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -361,8 +361,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -371,8 +371,8 @@ static const struct ata_port_info k2_port_info[] = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | K2_FLAG_SATA_8_PORTS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -380,8 +380,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -389,8 +389,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index ec04b8d3c791..dce3dccced3f 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -265,8 +265,8 @@ static const struct ata_port_info pdc_port_info[] = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_20621_ops, }, diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 019575bb3e08..e5bff47e8aa1 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -89,7 +89,7 @@ static struct ata_port_operations uli_ops = { static const struct ata_port_info uli_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_IGN_SIMPLEX, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &uli_ops, }; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5c62da9cd491..98e8c50703b3 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -146,24 +146,24 @@ static struct ata_port_operations vt8251_ops = { static const struct ata_port_info vt6420_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt6420_sata_ops, }; static struct ata_port_info vt6421_sport_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt6421_sata_ops, }; static struct ata_port_info vt6421_pport_info = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &vt6421_pata_ops, }; @@ -171,8 +171,8 @@ static struct ata_port_info vt6421_pport_info = { static struct ata_port_info vt8251_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt8251_ops, }; diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index c57cdff9e6bd..ef211f333d7b 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -345,8 +345,8 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev, static const struct ata_port_info pi = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vsc_sata_ops, }; -- cgit v1.2.3 From aef37d8d80d8c027f03d362a97afe3f6a42bfbb4 Mon Sep 17 00:00:00 2001 From: Erik Inge Bolsø Date: Sat, 14 Mar 2009 23:07:33 +0100 Subject: pata_radisys: fix mwdma_mask to exclude mwdma0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As noted by Alan: >Your suspicions are correct here btw - the device can only do MWDMA1 and >MWDMA2 (much like some PIIX devices) Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik --- drivers/ata/pata_radisys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1956d5c03a7f..4401b332eaab 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -217,7 +217,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ + .mwdma_mask = ATA_MWDMA12_ONLY, .udma_mask = ATA_UDMA24_ONLY, .port_ops = &radisys_pata_ops, }; -- cgit v1.2.3 From b2a034cf16a1642e647497c70c1cd9c09bf39412 Mon Sep 17 00:00:00 2001 From: Erik Inge Bolsø Date: Sat, 14 Mar 2009 23:08:20 +0100 Subject: pata_efar: fix *dma_mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Alan: >and yes the EFAR does UDMA66. mwdma: >Yep - wrong comment. The EFAR is a sort of clone of the PIIX and I >copied the comment while EFAR don't appear to have copied the >limitation Signed-off-by: Erik Inge Bolsø Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index bd498cc3920e..2085e0a3a05a 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -252,8 +252,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, /* mwdma1-2 */ - .udma_mask = ATA_UDMA3, /* UDMA 66 */ + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &efar_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; -- cgit v1.2.3 From 9223d01b2fdf638a73888ad73a1784fca3454c1e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 13 Mar 2009 15:41:43 +0100 Subject: pata-rb532-cf: platform_get_irq() fix ignored failure platform_get_irq() can return -ENXIO, but since 'irq' is an unsigned int, it does not show when the IRQ resource wasn't found. Make irq an int so that we can use a single variable to test the platform_get_irq() return value. Signed-off-by: Roel Kluin Signed-off-by: Phil Sutter Signed-off-by: Florian Fainelli Signed-off-by: Jeff Garzik --- drivers/ata/pata_rb532_cf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 2f3b49cc4970..8e3cdef8a25f 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -104,7 +104,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah) static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) { - unsigned int irq; + int irq; int gpio; struct resource *res; struct ata_host *ah; -- cgit v1.2.3 From 40f21b1124a9552bc093469280eb8239dc5f73d7 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 10 Mar 2009 18:51:04 -0400 Subject: sata_mv: cosmetic preparations for IRQ coalescing Various cosmetic changes in preparation for the IRQ coalescing feature. Note that the various MV_IRQ_COAL_* definitions are restored/renamed in the folloup patch which adds IRQ coalescing to the driver. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 62 ++++++++++++++++++++++----------------------------- 1 file changed, 27 insertions(+), 35 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8cad3b2fe554..206220ec5820 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1,10 +1,13 @@ /* * sata_mv.c - Marvell SATA support * - * Copyright 2008: Marvell Corporation, all rights reserved. + * Copyright 2008-2009: Marvell Corporation, all rights reserved. * Copyright 2005: EMC Corporation, all rights reserved. * Copyright 2005 Red Hat, Inc. All rights reserved. * + * Originally written by Brett Russ. + * Extensive overhaul and enhancement by Mark Lord . + * * Please ALWAYS copy linux-ide@vger.kernel.org on emails. * * This program is free software; you can redistribute it and/or modify @@ -25,8 +28,6 @@ /* * sata_mv TODO list: * - * --> Errata workaround for NCQ device errors. - * * --> More errata workarounds for PCI-X. * * --> Complete a full errata audit for all chipsets to identify others. @@ -68,6 +69,16 @@ #define DRV_NAME "sata_mv" #define DRV_VERSION "1.26" +/* + * module options + */ + +static int msi; +#ifdef CONFIG_PCI +module_param(msi, int, S_IRUGO); +MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); +#endif + enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ @@ -78,12 +89,6 @@ enum { MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ MV_PCI_REG_BASE = 0, - MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ - MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), - MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), - MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), - MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL_OFS = 0x1046c, @@ -115,16 +120,14 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ - MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, - MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ, + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ | + ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA, MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, @@ -179,16 +182,16 @@ enum { PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64, SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020, SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024, - ERR_IRQ = (1 << 0), /* shift by port # */ - DONE_IRQ = (1 << 1), /* shift by port # */ + ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ + DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ PCI_ERR = (1 << 18), - TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ - TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ - PORTS_0_3_COAL_DONE = (1 << 8), - PORTS_4_7_COAL_DONE = (1 << 17), - PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ + TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ + TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ + PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */ + PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */ + ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */ GPIO_INT = (1 << 22), SELF_INT = (1 << 23), TWSI_INT = (1 << 24), @@ -621,7 +624,7 @@ static struct ata_port_operations mv6_ops = { .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, - .sff_check_status = mv_sff_check_status, + .sff_check_status = mv_sff_check_status, .sff_irq_clear = mv_sff_irq_clear, .check_atapi_dma = mv_check_atapi_dma, .bmdma_setup = mv_bmdma_setup, @@ -1255,8 +1258,8 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) } /** - * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma - * @ap: Port being initialized + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized * * There are two DMA modes on these chips: basic DMA, and EDMA. * @@ -2000,7 +2003,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) struct mv_host_priv *hpriv = ap->host->private_data; /* * Workaround for 88SX60x1 FEr SATA#25 (part 2). - * + * * After any NCQ error, the READ_LOG_EXT command * from libata-eh *must* use mv_qc_issue_fis(). * Otherwise it might fail, due to chip errata. @@ -3704,12 +3707,6 @@ static struct pci_driver mv_pci_driver = { .remove = ata_pci_remove_one, }; -/* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - /* move to PCI layer or libata core? */ static int pci_go_64(struct pci_dev *pdev) { @@ -3891,10 +3888,5 @@ MODULE_DEVICE_TABLE(pci, mv_pci_tbl); MODULE_VERSION(DRV_VERSION); MODULE_ALIAS("platform:" DRV_NAME); -#ifdef CONFIG_PCI -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); -#endif - module_init(mv_init); module_exit(mv_exit); -- cgit v1.2.3 From 2b748a0a344847fe6b924407bbe153e1878c9f09 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 10 Mar 2009 22:01:17 -0400 Subject: sata_mv: implement IRQ coalescing (v2) Add IRQ coalescing to sata_mv (off by default). This feature can reduce total interrupt overhead for RAID setups in some situations, by deferring the interrupt signal until one or both of: a) a specified io_count (completed SATA commands) is achieved, or b) a specified time interval elapses after an IO completion. For now, module parameters are used to set the irq_coalescing_io_count and irq_coalescing_usecs (timeout) globally. These may eventually be supplemented with sysfs attributes, so that thresholds can be set on-the-fly and on a per-chip (or even per-host_controller) basis. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 143 +++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 135 insertions(+), 8 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 206220ec5820..ef385451ffd5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -34,10 +34,7 @@ * * --> Develop a low-power-consumption strategy, and implement it. * - * --> [Experiment, low priority] Investigate interrupt coalescing. - * Quite often, especially with PCI Message Signalled Interrupts (MSI), - * the overhead reduced by interrupt mitigation is quite often not - * worth the latency cost. + * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. * * --> [Experiment, Marvell value added] Is it possible to use target * mode to cross-connect two Linux boxes with Marvell cards? If so, @@ -67,7 +64,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.26" +#define DRV_VERSION "1.27" /* * module options @@ -79,6 +76,16 @@ module_param(msi, int, S_IRUGO); MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); #endif +static int irq_coalescing_io_count; +module_param(irq_coalescing_io_count, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_io_count, + "IRQ coalescing I/O count threshold (0..255)"); + +static int irq_coalescing_usecs; +module_param(irq_coalescing_usecs, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_usecs, + "IRQ coalescing time threshold in usecs"); + enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ @@ -88,8 +95,33 @@ enum { MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */ + COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */ + MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */ + MAX_COAL_IO_COUNT = 255, /* completed I/O count */ + MV_PCI_REG_BASE = 0, + /* + * Per-chip ("all ports") interrupt coalescing feature. + * This is only for GEN_II / GEN_IIE hardware. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + MV_COAL_REG_BASE = 0x18000, + MV_IRQ_COAL_CAUSE = (MV_COAL_REG_BASE + 0x08), + ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ + + MV_IRQ_COAL_IO_THRESHOLD = (MV_COAL_REG_BASE + 0xcc), + MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0), + + /* + * Registers for the (unused here) transaction coalescing feature: + */ + MV_TRAN_COAL_CAUSE_LO = (MV_COAL_REG_BASE + 0x88), + MV_TRAN_COAL_CAUSE_HI = (MV_COAL_REG_BASE + 0x8c), + MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL_OFS = 0x1046c, MV_GPIO_PORT_CTL_OFS = 0x104f0, @@ -186,6 +218,8 @@ enum { DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */ + DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */ PCI_ERR = (1 << 18), TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ @@ -207,6 +241,16 @@ enum { HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ + /* + * Per-HC (Host-Controller) interrupt coalescing feature. + * This is present on all chip generations. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, + HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + /* Shadow block registers */ SHD_BLK_OFS = 0x100, SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ @@ -897,6 +941,23 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } +static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) +{ + /* + * When writing to the main_irq_mask in hardware, + * we must ensure exclusivity between the interrupt coalescing bits + * and the corresponding individual port DONE_IRQ bits. + * + * Note that this register is really an "IRQ enable" register, + * not an "IRQ mask" register as Marvell's naming might suggest. + */ + if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE)) + mask &= ~DONE_IRQ_0_3; + if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE)) + mask &= ~DONE_IRQ_4_7; + writelfl(mask, hpriv->main_irq_mask_addr); +} + static void mv_set_main_irq_mask(struct ata_host *host, u32 disable_bits, u32 enable_bits) { @@ -907,7 +968,7 @@ static void mv_set_main_irq_mask(struct ata_host *host, new_mask = (old_mask & ~disable_bits) | enable_bits; if (new_mask != old_mask) { hpriv->main_irq_mask = new_mask; - writelfl(new_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(new_mask, hpriv); } } @@ -948,6 +1009,64 @@ static void mv_clear_and_enable_port_irqs(struct ata_port *ap, mv_enable_port_irqs(ap, port_irqs); } +static void mv_set_irq_coalescing(struct ata_host *host, + unsigned int count, unsigned int usecs) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base, *hc_mmio; + u32 coal_enable = 0; + unsigned long flags; + unsigned int clks; + const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | + ALL_PORTS_COAL_DONE; + + /* Disable IRQ coalescing if either threshold is zero */ + if (!usecs || !count) { + clks = count = 0; + } else { + /* Respect maximum limits of the hardware */ + clks = usecs * COAL_CLOCKS_PER_USEC; + if (clks > MAX_COAL_TIME_THRESHOLD) + clks = MAX_COAL_TIME_THRESHOLD; + if (count > MAX_COAL_IO_COUNT) + count = MAX_COAL_IO_COUNT; + } + + spin_lock_irqsave(&host->lock, flags); + +#if 0 /* disabled pending functional clarification from Marvell */ + if (!IS_GEN_I(hpriv)) { + /* + * GEN_II/GEN_IIE: global thresholds for the entire chip. + */ + writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); + writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); + /* clear leftover coal IRQ bit */ + writelfl(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + clks = count = 0; /* so as to clear the alternate regs below */ + coal_enable = ALL_PORTS_COAL_DONE; + } +#endif + /* + * All chips: independent thresholds for each HC on the chip. + */ + hc_mmio = mv_hc_base_from_port(mmio, 0); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + coal_enable |= PORTS_0_3_COAL_DONE; + if (hpriv->n_ports > 4) { + hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + coal_enable |= PORTS_4_7_COAL_DONE; + } + if (!count) + coal_enable = 0; + mv_set_main_irq_mask(host, coal_disable, coal_enable); + + spin_unlock_irqrestore(&host->lock, flags); +} + /** * mv_start_edma - Enable eDMA engine * @base: port base address @@ -2500,6 +2619,10 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) void __iomem *mmio = hpriv->base, *hc_mmio; unsigned int handled = 0, port; + /* If asserted, clear the "all ports" IRQ coalescing bit */ + if (main_irq_cause & ALL_PORTS_COAL_DONE) + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + for (port = 0; port < hpriv->n_ports; port++) { struct ata_port *ap = host->ports[port]; unsigned int p, shift, hardport, port_cause; @@ -2532,6 +2655,8 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) * to ack (only) those ports via hc_irq_cause. */ ack_irqs = 0; + if (hc_cause & PORTS_0_3_COAL_DONE) + ack_irqs = HC_COAL_IRQ; for (p = 0; p < MV_PORTS_PER_HC; ++p) { if ((port + p) >= hpriv->n_ports) break; @@ -2620,7 +2745,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: block new interrupts while in here */ if (using_msi) - writel(0, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(0, hpriv); main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; @@ -2637,7 +2762,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: unmask; interrupt cause bits will retrigger now */ if (using_msi) - writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv); spin_unlock(&host->lock); @@ -3546,6 +3671,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) * The per-port interrupts get done later as ports are set up. */ mv_set_main_irq_mask(host, 0, PCI_ERR); + mv_set_irq_coalescing(host, irq_coalescing_io_count, + irq_coalescing_usecs); done: return rc; } -- cgit v1.2.3 From 6abf4678261218938ccdac90767d34ce9937634f Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 11 Mar 2009 00:56:00 -0400 Subject: sata_mv: optimize IRQ coalescing for 8-port chips Enable use of the "all ports" IRQ coalescing optimization for GEN_II / GEN_IIE chips that have dual host-controllers (8-ports). Currently only the 6081 chip qualifies, but other chips may come along someday. Rather than each half of the chip having to satisfy a local set of coalescing thresholds, use of this feature groups all ports together under a single set of thresholds. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index ef385451ffd5..47184567248d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1016,7 +1016,7 @@ static void mv_set_irq_coalescing(struct ata_host *host, void __iomem *mmio = hpriv->base, *hc_mmio; u32 coal_enable = 0; unsigned long flags; - unsigned int clks; + unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC; const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | ALL_PORTS_COAL_DONE; @@ -1033,37 +1033,41 @@ static void mv_set_irq_coalescing(struct ata_host *host, } spin_lock_irqsave(&host->lock, flags); + mv_set_main_irq_mask(host, coal_disable, 0); -#if 0 /* disabled pending functional clarification from Marvell */ - if (!IS_GEN_I(hpriv)) { + if (is_dual_hc && !IS_GEN_I(hpriv)) { /* - * GEN_II/GEN_IIE: global thresholds for the entire chip. + * GEN_II/GEN_IIE with dual host controllers: + * one set of global thresholds for the entire chip. */ writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); /* clear leftover coal IRQ bit */ - writelfl(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); - clks = count = 0; /* so as to clear the alternate regs below */ - coal_enable = ALL_PORTS_COAL_DONE; + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + if (count) + coal_enable = ALL_PORTS_COAL_DONE; + clks = count = 0; /* force clearing of regular regs below */ } -#endif + /* * All chips: independent thresholds for each HC on the chip. */ hc_mmio = mv_hc_base_from_port(mmio, 0); writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); - coal_enable |= PORTS_0_3_COAL_DONE; - if (hpriv->n_ports > 4) { + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_0_3_COAL_DONE; + if (is_dual_hc) { hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); - coal_enable |= PORTS_4_7_COAL_DONE; + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_4_7_COAL_DONE; } - if (!count) - coal_enable = 0; - mv_set_main_irq_mask(host, coal_disable, coal_enable); + mv_set_main_irq_mask(host, 0, coal_enable); spin_unlock_irqrestore(&host->lock, flags); } -- cgit v1.2.3 From 000b344f4ca7828ee43940255c8bbb32e2c7dbec Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sun, 15 Mar 2009 11:33:19 -0400 Subject: sata_mv: fix LED blinking for SoC+NCQ For Marvell SoC chips, the HDD LED does not blink when there is disk I/O if NCQ is enabled. Add a quirk that enables blink mode for the LED while NCQ is enabled on any port of a SoC host controller. Normal LED function is restored when NCQ is not enabled on any port. The code to enable the blink mode is based on earlier code and suggestions from Frans Pop, Saeed Bishara, and possibly others. Signed-off-by: Mark Lord Tested-by: Frans Pop Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 47184567248d..8a751054c8a1 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -251,6 +251,11 @@ enum { HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + SOC_LED_CTRL_OFS = 0x2c, + SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ + SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ + /* with dev activity LED */ + /* Shadow block registers */ SHD_BLK_OFS = 0x100, SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ @@ -411,6 +416,7 @@ enum { MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ + MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -1404,6 +1410,61 @@ static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); } +/* + * SOC chips have an issue whereby the HDD LEDs don't always blink + * during I/O when NCQ is enabled. Enabling a special "LED blink" mode + * of the SOC takes care of it, generating a steady blink rate when + * any drive on the chip is active. + * + * Unfortunately, the blink mode is a global hardware setting for the SOC, + * so we must use it whenever at least one port on the SOC has NCQ enabled. + * + * We turn "LED blink" off when NCQ is not in use anywhere, because the normal + * LED operation works then, and provides better (more accurate) feedback. + * + * Note that this code assumes that an SOC never has more than one HC onboard. + */ +static void mv_soc_led_blink_enable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + + if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN) + return; + hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + +static void mv_soc_led_blink_disable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + unsigned int port; + + if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)) + return; + + /* disable led-blink only if no ports are using NCQ */ + for (port = 0; port < hpriv->n_ports; port++) { + struct ata_port *this_ap = host->ports[port]; + struct mv_port_priv *pp = this_ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) + return; + } + + hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; @@ -1451,6 +1512,13 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ mv_bmdma_enable_iie(ap, !want_edma); + + if (IS_SOC(hpriv)) { + if (want_ncq) + mv_soc_led_blink_enable(ap); + else + mv_soc_led_blink_disable(ap); + } } if (want_ncq) { -- cgit v1.2.3 From e18086d69cb5bb864749a0637f6ac573aa89d5ea Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Thu, 19 Mar 2009 13:32:21 -0400 Subject: [libata] More robust parsing for IDENTIFY DEVICE multi_count field Make libata more robust when parsing the multi_count field from a drive's identify data. This prevents us from attempting to use dubious multi_count values ad infinitum. Reset dev->multi_count to zero and reprobe it each time through this routine, as it can change on device reset. Also ensure that the reported "maximum" value is valid and is a power of two, and that the reported "count" value is valid and also a power of two. And that the "count" value is not greater than the "maximum" value. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d4a7b8a96ecd..e7ea77cf6069 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include #include @@ -2389,6 +2390,7 @@ int ata_dev_configure(struct ata_device *dev) dev->cylinders = 0; dev->heads = 0; dev->sectors = 0; + dev->multi_count = 0; /* * common ATA, ATAPI feature tests @@ -2426,8 +2428,15 @@ int ata_dev_configure(struct ata_device *dev) dev->n_sectors = ata_id_n_sectors(id); - if (dev->id[59] & 0x100) - dev->multi_count = dev->id[59] & 0xff; + /* get current R/W Multiple count setting */ + if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) { + unsigned int max = dev->id[47] & 0xff; + unsigned int cnt = dev->id[59] & 0xff; + /* only recognize/allow powers of two here */ + if (is_power_of_2(max) && is_power_of_2(cnt)) + if (cnt <= max) + dev->multi_count = cnt; + } if (ata_id_has_lba(id)) { const char *lba_desc; -- cgit v1.2.3 From 208f2a886a2f6cf329c9fcbf8d29a0dd245cc763 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Fri, 20 Mar 2009 14:14:23 -0500 Subject: [libata] ahci: correct enclosure LED state save ahci_transmit_led_message saves off the led_state with a value that includes the port number OR'd in, this incorrect value maybe reported back in ahci_led_store. For instance, if you turn off all the leds for port 1 and cat the value back it will report 1 instead of 0. # echo 0 > /sys/class/scsi_host/host1/em_message # cat /sys/class/scsi_host/host1/em_message 1 Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index ec2922ad2dc0..788bba2b1e17 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1348,7 +1348,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, writel(message[1], mmio + hpriv->em_loc+4); /* save off new led state for port/slot */ - emp->led_state = message[1]; + emp->led_state = state; /* * tell hardware to transmit the message -- cgit v1.2.3 From 140d6fed71a659f39f0b130b6ac8f8d28600bf60 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:21:49 +0000 Subject: pata_artop: Serializing support Enable both ports on the 6210 and serialize them Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_artop.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 07c7fae6da13..d332cfdb0f30 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -12,7 +12,6 @@ * performance Alessandro Zummo * * TODO - * 850 serialization once the core supports it * Investigate no_dsc on 850R * Clock detect */ @@ -29,7 +28,7 @@ #include #define DRV_NAME "pata_artop" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /* * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we @@ -283,6 +282,31 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); } +/** + * artop_6210_qc_defer - implement serialization + * @qc: command + * + * Issue commands per host on this chip. + */ + +static int artop6210_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static struct scsi_host_template artop_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -293,6 +317,7 @@ static struct ata_port_operations artop6210_ops = { .set_piomode = artop6210_set_piomode, .set_dmamode = artop6210_set_dmamode, .prereset = artop6210_pre_reset, + .qc_defer = artop6210_qc_defer, }; static struct ata_port_operations artop6260_ops = { @@ -362,12 +387,8 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) if (id->driver_data == 0) { /* 6210 variant */ ppi[0] = &info_6210; - ppi[1] = &ata_dummy_port_info; /* BIOS may have left us in UDMA, clear it before libata probe */ pci_write_config_byte(pdev, 0x54, 0); - /* For the moment (also lacks dsc) */ - printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); - printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); } else if (id->driver_data == 1) /* 6260 */ ppi[0] = &info_626x; -- cgit v1.2.3 From c0f2ee34a5a0b79fd98d965ad8ae765d4639bfa5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:22:25 +0000 Subject: pata_sc1200: Activate secondary channel Implement serialize and turn on slave channel Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_sc1200.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 36a0c3593297..f49814d6fd2e 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -2,7 +2,6 @@ * New ATA layer SC1200 driver Alan Cox * * TODO: Mode selection filtering - * TODO: Can't enable second channel until ATA core has serialize * TODO: Needs custom DMA cleanup code * * Based very heavily on @@ -178,6 +177,31 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc) return ata_sff_qc_issue(qc); } +/** + * sc1200_qc_defer - implement serialization + * @qc: command + * + * Serialize command issue on this controller. + */ + +static int sc1200_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static struct scsi_host_template sc1200_sht = { ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, @@ -187,6 +211,7 @@ static struct ata_port_operations sc1200_port_ops = { .inherits = &ata_bmdma_port_ops, .qc_prep = ata_sff_dumb_qc_prep, .qc_issue = sc1200_qc_issue, + .qc_defer = sc1200_qc_defer, .cable_detect = ata_cable_40wire, .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, @@ -211,7 +236,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &sc1200_port_ops }; /* Can't enable port 2 yet, see top comments */ - const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + const struct ata_port_info *ppi[] = { &info, }; return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); } -- cgit v1.2.3 From 3d47aa8e7e7b2aa09256590388aa8dddc79280f9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:23:19 +0000 Subject: [libata] Drain data on errors If the device is signalling that there is data to drain after an error we should read the bytes out and throw them away. Without this some devices and controllers get wedged and don't recover. Based on earlier work by Mark Lord Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 45 +++++++++++++++++++++++++++++++++++++++++++-- drivers/ata/pata_pcmcia.c | 34 +++++++++++++++++++++++++++++++++- include/linux/libata.h | 3 +++ 3 files changed, 79 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index f93dc029dfde..9a10cb055ac2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -52,6 +52,7 @@ const struct ata_port_operations ata_sff_port_ops = { .softreset = ata_sff_softreset, .hardreset = sata_sff_hardreset, .postreset = ata_sff_postreset, + .drain_fifo = ata_sff_drain_fifo, .error_handler = ata_sff_error_handler, .post_internal_cmd = ata_sff_post_internal_cmd, @@ -2198,6 +2199,39 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) } EXPORT_SYMBOL_GPL(ata_sff_postreset); +/** + * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void ata_sff_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count < 32768; count++) + ioread16(ap->ioaddr.data_addr); + + /* Can become DEBUG later */ + if (count) + ata_port_printk(ap, KERN_DEBUG, + "drained %d bytes to clear DRQ.\n", count); + +} +EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); + /** * ata_sff_error_handler - Stock error handler for BMDMA controller * @ap: port to handle error for @@ -2239,7 +2273,8 @@ void ata_sff_error_handler(struct ata_port *ap) * really a timeout event, adjust error mask and * cancel frozen state. */ - if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + if (qc->err_mask == AC_ERR_TIMEOUT + && (host_stat & ATA_DMA_ERR)) { qc->err_mask = AC_ERR_HOST_BUS; thaw = 1; } @@ -2250,6 +2285,13 @@ void ata_sff_error_handler(struct ata_port *ap) ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); + /* We *MUST* do FIFO draining before we issue a reset as several + * devices helpfully clear their internal state and will lock solid + * if we touch the data port post reset. Pass qc in case anyone wants + * to do different PIO/DMA recovery or has per command fixups + */ + if (ap->ops->drain_fifo) + ap->ops->drain_fifo(qc); spin_unlock_irqrestore(ap->lock, flags); @@ -2959,4 +3001,3 @@ out: EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ - diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index a5cbcc280b23..f4d009ed50ac 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.5" /* * Private data structure to glue stuff together @@ -126,6 +126,37 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, return buflen; } +/** + * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count++ < 65536;) + ioread8(ap->ioaddr.data_addr); + + if (count) + ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n", + count); + +} static struct scsi_host_template pcmcia_sht = { ATA_PIO_SHT(DRV_NAME), @@ -143,6 +174,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { .sff_data_xfer = ata_data_xfer_8bit, .cable_detect = ata_cable_40wire, .set_mode = pcmcia_set_mode_8bit, + .drain_fifo = pcmcia_8bit_drain_fifo, }; #define CS_CHECK(fn, ret) \ diff --git a/include/linux/libata.h b/include/linux/libata.h index 19af7d22a7f8..3a07a32dfc2e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -836,6 +836,8 @@ struct ata_port_operations { void (*bmdma_start)(struct ata_queued_cmd *qc); void (*bmdma_stop)(struct ata_queued_cmd *qc); u8 (*bmdma_status)(struct ata_port *ap); + + void (*drain_fifo)(struct ata_queued_cmd *qc); #endif /* CONFIG_ATA_SFF */ ssize_t (*em_show)(struct ata_port *ap, char *buf); @@ -1587,6 +1589,7 @@ extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes, extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes); +extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); -- cgit v1.2.3 From c96f1732e25362d10ee7bcac1df8412a2e6b7d23 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Mar 2009 10:23:46 +0000 Subject: [libata] Improve timeout handling On a timeout call a device specific handler early in the recovery so that we can complete and process successful commands which timed out due to IRQ loss or the like rather more elegantly. [Revised to exclude the timeout handling on a few devices that inherit from SFF but are not SFF enough to use the default timeout handler] Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 19 +++++++++++++++++-- drivers/ata/libata-sff.c | 46 +++++++++++++++++++++++++++++++++++++++++++++- drivers/ata/pata_isapnp.c | 12 ++++++++++-- drivers/ata/pdc_adma.c | 2 ++ drivers/ata/sata_mv.c | 2 ++ drivers/ata/sata_nv.c | 1 + drivers/ata/sata_promise.c | 2 ++ drivers/ata/sata_qstor.c | 1 + drivers/ata/sata_vsc.c | 3 +++ include/linux/libata.h | 2 ++ 10 files changed, 85 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ea890911d4fa..01831312c360 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -547,7 +547,7 @@ void ata_scsi_error(struct Scsi_Host *host) /* For new EH, all qcs are finished in one of three ways - * normal completion, error completion, and SCSI timeout. - * Both cmpletions can race against SCSI timeout. When normal + * Both completions can race against SCSI timeout. When normal * completion wins, the qc never reaches EH. When error * completion wins, the qc has ATA_QCFLAG_FAILED set. * @@ -562,7 +562,19 @@ void ata_scsi_error(struct Scsi_Host *host) int nr_timedout = 0; spin_lock_irqsave(ap->lock, flags); - + + /* This must occur under the ap->lock as we don't want + a polled recovery to race the real interrupt handler + + The lost_interrupt handler checks for any completed but + non-notified command and completes much like an IRQ handler. + + We then fall into the error recovery code which will treat + this as if normal completion won the race */ + + if (ap->ops->lost_interrupt) + ap->ops->lost_interrupt(ap); + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -606,6 +618,9 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_tries = ATA_EH_MAX_TRIES; } else spin_unlock_wait(ap->lock); + + /* If we timed raced normal completion and there is nothing to + recover nr_timedout == 0 why exactly are we doing error recovery ? */ repeat: /* invoke error handler */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 9a10cb055ac2..8332e97a9de3 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -65,6 +65,8 @@ const struct ata_port_operations ata_sff_port_ops = { .sff_irq_on = ata_sff_irq_on, .sff_irq_clear = ata_sff_irq_clear, + .lost_interrupt = ata_sff_lost_interrupt, + .port_start = ata_sff_port_start, }; EXPORT_SYMBOL_GPL(ata_sff_port_ops); @@ -1647,7 +1649,7 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf); * RETURNS: * One if interrupt was handled, zero if not (shared irq). */ -inline unsigned int ata_sff_host_intr(struct ata_port *ap, +unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) { struct ata_eh_info *ehi = &ap->link.eh_info; @@ -1775,6 +1777,48 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) } EXPORT_SYMBOL_GPL(ata_sff_interrupt); +/** + * ata_sff_lost_interrupt - Check for an apparent lost interrupt + * @ap: port that appears to have timed out + * + * Called from the libata error handlers when the core code suspects + * an interrupt has been lost. If it has complete anything we can and + * then return. Interface must support altstatus for this faster + * recovery to occur. + * + * Locking: + * Caller holds host lock + */ + +void ata_sff_lost_interrupt(struct ata_port *ap) +{ + u8 status; + struct ata_queued_cmd *qc; + + /* Only one outstanding command per SFF channel */ + qc = ata_qc_from_tag(ap, ap->link.active_tag); + /* Check we have a live one.. */ + if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE)) + return; + /* We cannot lose an interrupt on a polled command */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return; + /* See if the controller thinks it is still busy - if so the command + isn't a lost IRQ but is still in progress */ + status = ata_sff_altstatus(ap); + if (status & ATA_BUSY) + return; + + /* There was a command running, we are no longer busy and we have + no interrupt. */ + ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n", + status); + /* Run the host interrupt logic as if the interrupt had not been + lost */ + ata_sff_host_intr(ap, qc); +} +EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); + /** * ata_sff_freeze - Freeze SFF controller port * @ap: port to freeze diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index afa8f704271e..4bceb8803a10 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.2" +#define DRV_VERSION "0.2.5" static struct scsi_host_template isapnp_sht = { ATA_PIO_SHT(DRV_NAME), @@ -28,6 +28,13 @@ static struct ata_port_operations isapnp_port_ops = { .cable_detect = ata_cable_40wire, }; +static struct ata_port_operations isapnp_noalt_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + /* No altstatus so we don't want to use the lost interrupt poll */ + .lost_interrupt = ATA_OP_NULL, +}; + /** * isapnp_init_one - attach an isapnp interface * @idev: PnP device @@ -65,7 +72,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap = host->ports[0]; - ap->ops = &isapnp_port_ops; + ap->ops = &isapnp_noalt_port_ops; ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; @@ -76,6 +83,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; + ap->ops = &isapnp_port_ops; } ata_sff_std_ports(&ap->ioaddr); diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index c509c206a459..39588178d028 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -148,6 +148,8 @@ static struct scsi_host_template adma_ata_sht = { static struct ata_port_operations adma_ata_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .check_atapi_dma = adma_check_atapi_dma, .qc_prep = adma_qc_prep, .qc_issue = adma_qc_issue, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8a751054c8a1..a377226b81c8 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -646,6 +646,8 @@ static struct scsi_host_template mv6_sht = { static struct ata_port_operations mv5_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .qc_defer = mv_qc_defer, .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 2f523f8c27f6..6cda12ba8122 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -408,6 +408,7 @@ static struct scsi_host_template nv_swncq_sht = { static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, + .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 3ad2b8863636..b1fd7d62071a 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -176,7 +176,9 @@ static const struct ata_port_operations pdc_common_ops = { .check_atapi_dma = pdc_check_atapi_dma, .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue, + .sff_irq_clear = pdc_irq_clear, + .lost_interrupt = ATA_OP_NULL, .post_internal_cmd = pdc_post_internal_cmd, .error_handler = pdc_error_handler, diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 7112d89fd9ff..c3936d35cdac 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -147,6 +147,7 @@ static struct ata_port_operations qs_ata_ops = { .softreset = ATA_OP_NULL, .error_handler = qs_error_handler, .post_internal_cmd = ATA_OP_NULL, + .lost_interrupt = ATA_OP_NULL, .scr_read = qs_scr_read, .scr_write = qs_scr_write, diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index ef211f333d7b..ed70bd28fa2c 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -308,6 +308,9 @@ static struct scsi_host_template vsc_sata_sht = { static struct ata_port_operations vsc_sata_ops = { .inherits = &ata_bmdma_port_ops, + /* The IRQ handling is not quite standard SFF behaviour so we + cannot use the default lost interrupt handler */ + .lost_interrupt = ATA_OP_NULL, .sff_tf_load = vsc_sata_tf_load, .sff_tf_read = vsc_sata_tf_read, .freeze = vsc_freeze, diff --git a/include/linux/libata.h b/include/linux/libata.h index 3a07a32dfc2e..76262d83656b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -795,6 +795,7 @@ struct ata_port_operations { ata_reset_fn_t pmp_hardreset; ata_postreset_fn_t pmp_postreset; void (*error_handler)(struct ata_port *ap); + void (*lost_interrupt)(struct ata_port *ap); void (*post_internal_cmd)(struct ata_queued_cmd *qc); /* @@ -1577,6 +1578,7 @@ extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc); extern unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance); +extern void ata_sff_lost_interrupt(struct ata_port *ap); extern void ata_sff_freeze(struct ata_port *ap); extern void ata_sff_thaw(struct ata_port *ap); extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline); -- cgit v1.2.3 From 11ff6f05f1e836a6a02369a4c4b64757e484adc1 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 26 Mar 2009 17:32:14 +0000 Subject: Allow relatime to update atime once a day Allow atime to be updated once per day even with relatime. This lets utilities like tmpreaper (which delete files based on last access time) continue working, making relatime a plausible default for distributions. Signed-off-by: Matthew Garrett Reviewed-by: Matthew Wilcox Acked-by: Valerie Aurora Henson Acked-by: Alan Cox Acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- fs/inode.c | 47 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 38 insertions(+), 9 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 826fb0b9d1c3..6ac0cef6c5f5 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1290,6 +1290,40 @@ sector_t bmap(struct inode * inode, sector_t block) } EXPORT_SYMBOL(bmap); +/* + * With relative atime, only update atime if the previous atime is + * earlier than either the ctime or mtime or if at least a day has + * passed since the last atime update. + */ +static int relatime_need_update(struct vfsmount *mnt, struct inode *inode, + struct timespec now) +{ + + if (!(mnt->mnt_flags & MNT_RELATIME)) + return 1; + /* + * Is mtime younger than atime? If yes, update atime: + */ + if (timespec_compare(&inode->i_mtime, &inode->i_atime) >= 0) + return 1; + /* + * Is ctime younger than atime? If yes, update atime: + */ + if (timespec_compare(&inode->i_ctime, &inode->i_atime) >= 0) + return 1; + + /* + * Is the previous atime value older than a day? If yes, + * update atime: + */ + if ((long)(now.tv_sec - inode->i_atime.tv_sec) >= 24*60*60) + return 1; + /* + * Good, we can skip the atime update: + */ + return 0; +} + /** * touch_atime - update the access time * @mnt: mount the inode is accessed on @@ -1317,17 +1351,12 @@ void touch_atime(struct vfsmount *mnt, struct dentry *dentry) goto out; if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)) goto out; - if (mnt->mnt_flags & MNT_RELATIME) { - /* - * With relative atime, only update atime if the previous - * atime is earlier than either the ctime or mtime. - */ - if (timespec_compare(&inode->i_mtime, &inode->i_atime) < 0 && - timespec_compare(&inode->i_ctime, &inode->i_atime) < 0) - goto out; - } now = current_fs_time(inode->i_sb); + + if (!relatime_need_update(mnt, inode, now)) + goto out; + if (timespec_equal(&inode->i_atime, &now)) goto out; -- cgit v1.2.3 From d0adde574b8487ef30f69e2d08bba769e4be513f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 26 Mar 2009 17:49:56 +0000 Subject: Add a strictatime mount option Add support for explicitly requesting full atime updates. This makes it possible for kernels to default to relatime but still allow userspace to override it. Signed-off-by: Matthew Garrett Signed-off-by: Linus Torvalds --- fs/namespace.c | 6 +++++- include/linux/fs.h | 1 + include/linux/mount.h | 1 + 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/namespace.c b/fs/namespace.c index 06f8e63f6cb1..d0659ec291c9 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -780,6 +780,7 @@ static void show_mnt_opts(struct seq_file *m, struct vfsmount *mnt) { MNT_NOATIME, ",noatime" }, { MNT_NODIRATIME, ",nodiratime" }, { MNT_RELATIME, ",relatime" }, + { MNT_STRICTATIME, ",strictatime" }, { 0, NULL } }; const struct proc_fs_info *fs_infop; @@ -1932,11 +1933,14 @@ long do_mount(char *dev_name, char *dir_name, char *type_page, mnt_flags |= MNT_NODIRATIME; if (flags & MS_RELATIME) mnt_flags |= MNT_RELATIME; + if (flags & MS_STRICTATIME) + mnt_flags &= ~(MNT_RELATIME | MNT_NOATIME); if (flags & MS_RDONLY) mnt_flags |= MNT_READONLY; flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE | - MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT); + MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT | + MS_STRICTATIME); /* ... and get the mountpoint */ retval = kern_path(dir_name, LOOKUP_FOLLOW, &path); diff --git a/include/linux/fs.h b/include/linux/fs.h index 92734c0012e6..5bc81c4a98c1 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -141,6 +141,7 @@ struct inodes_stat_t { #define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ #define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ #define MS_I_VERSION (1<<23) /* Update inode I_version field */ +#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ #define MS_ACTIVE (1<<30) #define MS_NOUSER (1<<31) diff --git a/include/linux/mount.h b/include/linux/mount.h index cab2a85e2ee8..51f55f903aff 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -27,6 +27,7 @@ struct mnt_namespace; #define MNT_NODIRATIME 0x10 #define MNT_RELATIME 0x20 #define MNT_READONLY 0x40 /* does the user want this to be r/o? */ +#define MNT_STRICTATIME 0x80 #define MNT_SHRINKABLE 0x100 #define MNT_IMBALANCED_WRITE_COUNT 0x200 /* just for debugging */ -- cgit v1.2.3 From 0a1c01c9477602ee8b44548a9405b2c1d587b5a2 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 26 Mar 2009 17:53:14 +0000 Subject: Make relatime default Change the default behaviour of the kernel to use relatime for all filesystems. This can be overridden with the "strictatime" mount option. Signed-off-by: Matthew Garrett Signed-off-by: Linus Torvalds --- fs/namespace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index d0659ec291c9..f0e753097353 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1920,6 +1920,9 @@ long do_mount(char *dev_name, char *dir_name, char *type_page, if (data_page) ((char *)data_page)[PAGE_SIZE - 1] = 0; + /* Default to relatime */ + mnt_flags |= MNT_RELATIME; + /* Separate the per-mountpoint flags */ if (flags & MS_NOSUID) mnt_flags |= MNT_NOSUID; @@ -1931,8 +1934,6 @@ long do_mount(char *dev_name, char *dir_name, char *type_page, mnt_flags |= MNT_NOATIME; if (flags & MS_NODIRATIME) mnt_flags |= MNT_NODIRATIME; - if (flags & MS_RELATIME) - mnt_flags |= MNT_RELATIME; if (flags & MS_STRICTATIME) mnt_flags &= ~(MNT_RELATIME | MNT_NOATIME); if (flags & MS_RDONLY) -- cgit v1.2.3 From 1b5e62b42b55c509eea04c3c0f25e42c8b35b564 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Mon, 23 Mar 2009 08:57:38 +0800 Subject: writeback: double the dirty thresholds Enlarge default dirty ratios from 5/10 to 10/20. This fixes [Bug #12809] iozone regression with 2.6.29-rc6. The iozone benchmarks are performed on a 1200M file, with 8GB ram. iozone -i 0 -i 1 -i 2 -i 3 -i 4 -r 4k -s 64k -s 512m -s 1200m -b tmp.xls iozone -B -r 4k -s 64k -s 512m -s 1200m -b tmp.xls The performance regression is triggered by commit 1cf6e7d83bf3(mm: task dirty accounting fix), which makes more correct/thorough dirty accounting. The default 5/10 dirty ratios were picked (a) with the old dirty logic and (b) largely at random and (c) designed to be aggressive. In particular, that (a) means that having fixed some of the dirty accounting, maybe the real bug is now that it was always too aggressive, just hidden by an accounting issue. The enlarged 10/20 dirty ratios are just about enough to fix the regression. [ We will have to look at how this affects the old fsync() latency issue, but that probably will need independent work. - Linus ] Cc: Nick Piggin Cc: Peter Zijlstra Reported-by: "Lin, Ming M" Tested-by: "Lin, Ming M" Signed-off-by: Wu Fengguang Signed-off-by: Linus Torvalds --- mm/page-writeback.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 74dc57c74349..40ca7cdb653e 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -66,7 +66,7 @@ static inline long sync_writeback_pages(void) /* * Start background writeback (via pdflush) at this percentage */ -int dirty_background_ratio = 5; +int dirty_background_ratio = 10; /* * dirty_background_bytes starts at 0 (disabled) so that it is a function of @@ -83,7 +83,7 @@ int vm_highmem_is_dirtyable; /* * The generator of dirty data starts writeback at this percentage */ -int vm_dirty_ratio = 10; +int vm_dirty_ratio = 20; /* * vm_dirty_bytes starts at 0 (disabled) so that it is a function of -- cgit v1.2.3