Age | Commit message (Collapse) | Author | Files | Lines |
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
intentional. From Eric Dumazet.
2) Use-after-free in netfilter hook core, from Eric Dumazet.
3) Missing rcu read lock side for netfilter egress hook,
from Florian Westphal.
4) nf_queue assume state->sk is full socket while it might not be.
Invoke sock_gen_put(), from Florian Westphal.
5) Add selftest to exercise the reported KASAN splat in 4)
6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
Also from Florian.
7) Use input interface index only for hardware offload, not for
the software plane. This breaks tc ct action. Patch from Paul Blakey.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
netfilter: nf_queue: handle socket prefetch
netfilter: nf_queue: fix possible use-after-free
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
netfilter: nf_queue: don't assume sk is full socket
netfilter: egress: silence egress hook lockdep splats
netfilter: fix use-after-free in __nf_register_net_hook()
netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================
Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr ffff888106df0284 by task nf-queue/1459
sk_free+0x25/0x80
nf_queue_entry_release_refs+0x143/0x1a0
nf_reinject+0x233/0x770
... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests")
the mptcp selftests leave behind a couple of tmp files after
each run. run_tests_disconnect() misnames a few variables used to
track them. Address the issue setting the appropriate global variables
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
|
|
After the introduction of the dedicated struct slab to describe slab
pages by commit d122019bf061 ("mm: Split slab into its own type") and
the following removal of the corresponding struct page's fields by
commit 07f910f9b729 ("mm: Remove slab from struct page") the
memcg_slabinfo tool broke. An attempt to run it produces a trace like
this:
Traceback (most recent call last):
File "/usr/bin/drgn", line 33, in <module>
sys.exit(load_entry_point('drgn==0.0.16', 'console_scripts', 'drgn')())
File "/usr/lib64/python3.9/site-packages/drgn/internal/cli.py", line 133, in main
runpy.run_path(args.script[0], init_globals=init_globals, run_name="__main__")
File "/usr/lib64/python3.9/runpy.py", line 268, in run_path
return _run_module_code(code, init_globals, run_name,
File "/usr/lib64/python3.9/runpy.py", line 97, in _run_module_code
_run_code(code, mod_globals, init_globals,
File "/usr/lib64/python3.9/runpy.py", line 87, in _run_code
exec(code, run_globals)
File "memcg_slabinfo.py", line 226, in <module>
main()
File "memcg_slabinfo.py", line 199, in main
cache = page.slab_cache
AttributeError: 'struct page' has no member 'slab_cache'
The problem can be fixed by explicitly casting struct page * to struct
slab * for slab pages. The tools works as expected with this fix, e.g.:
cred_jar 776 776 192 21 1 : tunables 0 0 0 : slabdata 547 547 0
kmalloc-cg-32 6 6 32 128 1 : tunables 0 0 0 : slabdata 9 9 0
files_cache 3 3 832 39 8 : tunables 0 0 0 : slabdata 8 8 0
kmalloc-cg-512 1 1 512 32 4 : tunables 0 0 0 : slabdata 10 10 0
task_struct 10 10 6720 4 8 : tunables 0 0 0 : slabdata 63 63 0
mm_struct 3 3 1664 19 8 : tunables 0 0 0 : slabdata 9 9 0
kmalloc-cg-16 1 1 16 256 1 : tunables 0 0 0 : slabdata 8 8 0
pde_opener 1 1 40 102 1 : tunables 0 0 0 : slabdata 8 8 0
anon_vma_chain 375 375 64 64 1 : tunables 0 0 0 : slabdata 81 81 0
radix_tree_node 3 3 584 28 4 : tunables 0 0 0 : slabdata 419 419 0
dentry 98 98 312 26 2 : tunables 0 0 0 : slabdata 1420 1420 0
btrfs_inode 3 3 2368 13 8 : tunables 0 0 0 : slabdata 730 730 0
signal_cache 3 3 1600 20 8 : tunables 0 0 0 : slabdata 17 17 0
sighand_cache 3 3 2240 14 8 : tunables 0 0 0 : slabdata 20 20 0
filp 90 90 512 32 4 : tunables 0 0 0 : slabdata 95 95 0
anon_vma 214 214 200 20 1 : tunables 0 0 0 : slabdata 162 162 0
kmalloc-cg-1k 1 1 1024 32 8 : tunables 0 0 0 : slabdata 22 22 0
pid 10 10 256 32 2 : tunables 0 0 0 : slabdata 14 14 0
kmalloc-cg-64 2 2 64 64 1 : tunables 0 0 0 : slabdata 8 8 0
kmalloc-cg-96 3 3 96 42 1 : tunables 0 0 0 : slabdata 8 8 0
sock_inode_cache 5 5 1408 23 8 : tunables 0 0 0 : slabdata 29 29 0
UNIX 7 7 1920 17 8 : tunables 0 0 0 : slabdata 21 21 0
inode_cache 36 36 1152 28 8 : tunables 0 0 0 : slabdata 680 680 0
proc_inode_cache 26 26 1224 26 8 : tunables 0 0 0 : slabdata 64 64 0
kmalloc-cg-2k 2 2 2048 16 8 : tunables 0 0 0 : slabdata 9 9 0
v2: change naming and count_partial()/count_free()/for_each_slab()
signatures to work with slabs, suggested by Matthew Wilcox
Fixes: 07f910f9b729 ("mm: Remove slab from struct page")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Tested-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/linux-patches/Yg2cKKnIboNu7j+p@carbon.DHCP.thefacebook.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
|
|
Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The in kernel MPTCP PM implementation can process a single
incoming add address option at any given time. In the
mentioned test the server can surpass such limit. Let the
setup cope with that allowing a faster add_addr retransmission.
Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors")
Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mentioned test has to wait for a subflow creation failure.
The current code looks for TCP sockets in TW state and sometimes
misses the relevant event. Switch to a more stable check, looking
for the associated mib counter.
Fixes: 46e967d187ed ("selftests: mptcp: add tests for subflow creation failure")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix corrupt inject files when only last branch option is enabled with
ARM CoreSight ETM
- Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12
- Defer freeing string after possible strlen() on it in the BPF loader,
found by gcc 12
- Avoid early exit in 'perf trace' due SIGCHLD from non-workload
processes
- Fix arm64 perf_event_attr 'perf test's wrt --call-graph
initialization
- Fix libperf 32-bit build for 'perf test' wrt uint64_t printf
- Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
the CPU iterator
- Sync linux/perf_event.h UAPI with the kernel sources
- Update Jiri Olsa's email address in MAINTAINERS
* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Defer freeing string after possible strlen() on it
perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
libsubcmd: Fix use-after-free for realloc(..., 0)
libperf: Fix perf_cpu_map__for_each_cpu macro
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
perf cs-etm: No-op refactor of synth opt usage
libperf: Fix 32-bit build for tests uint64_t printf
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
perf trace: Avoid early exit due SIGCHLD from non-workload processes
MAINTAINERS: Update Jiri's email address
|
|
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 04f9bf2bac72480c ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Fixes: 7248e308a5758761 ("perf tools: Record ARM64 LR register automatically")
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220125104435.2737-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Tzvetomir Stoyanov reported an issue with using macro
perf_cpu_map__for_each_cpu using private perf_cpu object.
The issue is caused by recent change that wrapped cpu in struct perf_cpu
to distinguish it from cpu indexes. We need to make struct perf_cpu
public.
Add a simple test for using the perf_cpu_map__for_each_cpu macro.
Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Reported-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220215153713.31395-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf inject' with Coresight data generates files that cannot be opened
when only the last branch option is specified:
perf inject -i perf.data --itrace=l -o inject.data
perf script -i inject.data
0x33faa8 [0x8]: failed to process type: 9 [Bad address]
This is because cs_etm__synth_instruction_sample() is called even when
the sample type for instructions hasn't been setup. Last branch records
are attached to instruction samples so it doesn't make sense to generate
them when --itrace=i isn't specified anyway.
This change disables all calls of cs_etm__synth_instruction_sample()
unless --itrace=i is specified, resulting in a file with no samples if
only --itrace=l is provided, rather than a bad file.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sample_branches and sample_instructions are already saved in the
synth_opts struct. Other usages like synth_opts.last_branch don't save a
value, so make this more consistent by always going through synth_opts
and not saving duplicate values.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
added printf's of 64-bit ints using %lu which doesn't work on 32-bit
builds:
tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \
‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]
Use PRIu64 instead which works on both 32-bit and 64-bit systems.
Fixes: a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: https://lore.kernel.org/r/20220201213903.699656-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the trivial change in:
ddecd22878601a60 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures")
Just adds a comment.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The function trace__symbols_init() runs "perf-read-vdso32" and that ends up
with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early.
'perf trace' should exit only if the SIGCHLD is from our workload process.
So let's use sigaction() instead of signal() to match such condition.
Committer notes:
Use memset to zero the 'struct sigaction' variable as the '= { 0 }'
method isn't accepted in many compiler versions, e.g.:
4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220208140725.3947-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
|
|
bpf_msg_push_data may return a non-zero value to indicate an error. The
return value should be checked to prevent undetected errors.
To indicate an error, the BPF programs now perform a different action
than their intended one to make the userspace test program notice the
error, i.e., the programs supposed to pass/redirect drop, the program
supposed to drop passes.
Fixes: 84fbfe026acaa ("bpf: test_sockmap add options to use msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com
|
|
The PREEMPT_RT patchset does not use do_softirq() function thus trying
to filter for do_softirq fails for such kernel:
echo do_softirq
ftracetest: 81: echo: echo: I/O error
Choose some other visible function for the test. The function does not
have to be actually executed during the test, because it is only testing
filter API interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fixes to the RTLA tooling
- A fix to a tp_printk overriding tp_printk_stop_on_boot on the
command line
* tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
MAINTAINERS: Add RTLA entry
rtla: Fix segmentation fault when failing to enable -t
rtla/trace: Error message fixup
rtla/utils: Fix session duration parsing
rtla: Follow kernel version
|
|
There is no vmx_pi_mmio_test file. Remove it to get rid of error while
creation of selftest archive:
rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 6a58150859fd ("selftest: KVM: Add intra host migration tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
non-regular file needs to be compiled and then copied to the output
directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This
removes error thrown by rsync when non-regular object isn't found:
rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 0f71241a8e32 ("selftests/exec: add file type errno tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add selftest for nft_synproxy, from Florian Westphal.
2) xt_socket destroy path incorrectly disables IPv4 defrag for
IPv6 traffic (typo), from Eric Dumazet.
3) Fix exit value selftest nft_concat_range.sh, from Hangbin Liu.
4) nft_synproxy disables the IPv4 hooks if the IPv6 hooks fail
to be registered.
5) disable rp_filter on router in selftest nft_fib.sh, also
from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test treated zero as a successful run when it really should treat
non-zero as a successful run. A mount's idmapping can't change once it
has been attached to the filesystem.
Link: https://lore.kernel.org/r/20220203131411.3093040-2-brauner@kernel.org
Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests")
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-time fixes to pidfd, clone3, and ir tests"
* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ir: fix build with ancient kernel headers
selftests: fixup build warnings in pidfd / clone3 tests
pidfd: fix test failure due to stack overflow on some arches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fixes to the test and usage documentation"
* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Fix usage bug
kunit: fix missing f in f-string in run_checks.py
|
|
Some distros may enable rp_filter by default. After ns1 change addr to
10.0.2.99 and set default router to 10.0.2.1, while the connected router
address is still 10.0.1.1. The router will not reply the arp request
from ns1. Fix it by setting the router's veth0 rp_filter to 0.
Before the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1
table inet filter {
chain prerouting {
type filter hook prerouting priority filter; policy accept;
ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop
ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop
}
}
After the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
PASS: fib expression did drop packets for 1.1.1.1
PASS: fib expression did drop packets for 1c3::c01d
Fixes: 82944421243e ("selftests: netfilter: add fib test case")
Signed-off-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Otherwise, this test does not find the sysctl entry in place:
sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory
iperf3: error - unable to send control message: Bad file descriptor
FAIL: iperf3 returned an error
Fixes: 7152303cbec4 ("selftests: netfilter: add synproxy test")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 33c563ad28e3 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the nft_concat_range test failed, it exit 1 in the code
specifically.
But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.
Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Simple test for synproxy feature, iperf3 should be intercepted
by synproxy netns, but connection should still succeed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
rtla osnoise and timerlat are causing a segmentation fault when running
with the --trace option on a kernel that does not support multiple
instances. For example:
[root@f34 rtla]# rtla osnoise top -t
failed to enable the tracer osnoise
Could not enable osnoiser tracer for tracing
Failed to enable the trace instance
Segmentation fault (core dumped)
This error happens because the exit code of the tools is trying
to destroy the trace instance that failed to be created.
Make osnoise_destroy_tool() aware of possible NULL osnoise_tool *,
and do not attempt to destroy it. This also simplifies the exit code.
Link: https://lkml.kernel.org/r/5660a2b6bf66c2655842360f2d7f6b48db5dba23.1644327249.git.bristot@kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: 1eceb2fc2ca5 ("rtla/osnoise: Add osnoise top mode")
Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode")
Fixes: a828cd18bc4a ("rtla: Add timerlat tool and timelart top mode")
Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a potential truncated string warning triggered by gcc12"
* tag 'objtool_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix truncated string warning
|
|
The ftrace.target.system_wide must be set before invoking
evlist__create_maps(), otherwise it has no effect.
Fixes: 53be50282269b46c ("perf ftrace: Add 'latency' subcommand")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Picking the changes from:
06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
Performance counter stats for 'system wide':
CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,749,060 ns duration_time
1.000749060 seconds time elapsed
```
After:
```
Performance counter stats for 'system wide':
CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,464,828 ns duration_time
1.000464828 seconds time elapsed
```
Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Asaf Yaffe <asaf.yaffe@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|