summaryrefslogtreecommitdiffstats
path: root/sound/soc/atmel
AgeCommit message (Collapse)AuthorFilesLines
2017-07-03Merge remote-tracking branches 'asoc/topic/ak4613', 'asoc/topic/ak4642', ↵Mark Brown1-4/+2
'asoc/topic/atmel', 'asoc/topic/cs35l34' and 'asoc/topic/cs35l35' into asoc-next
2017-06-06ASoC: atmel: tse850: fix off-by-one in the "ANA" enumeration countPeter Rosin1-2/+2
At some point I added the "Low" entry at the beginning of the array without bumping the enumeration count from 9 to 10. Fix this. While at it, fix the anti-pattern for the other enumeration (used by MUX{1,2}). Fixes: aa43112445f0 ("ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-05-17ASoC: atmel-classd: sync regcache when resumingQuentin Schulz1-0/+9
The PM functions used in this driver are the ones defined in sounc/soc/soc-core.c. When suspending (using snd_soc_suspend), the regcache is marked dirty but is never synced on resume. Sync regcache on resume of Atmel ClassD device. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-17ASoC: atmel: Use IS_ENABLED()Takashi Iwai1-4/+2
Simplify the ifdef conditions with IS_ENABLED() macro. No functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07ASoC: atmel-classd: fix audio clock rateSongjun Wu1-1/+1
Fix the audio clock rate according to the datasheet. Reported-by: Dushara Jayasinghe <dushara@successful.com.au> Signed-off-by: Songjun Wu <songjun.wu@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-12-15ASoC: atmel: tse850: rely on the ssc to register as a cpu dai by itselfPeter Rosin1-20/+3
This breaks devicetree compatibility, but in this case that is ok. All affected units are either on my desk, or running an even older version of the driver that is not compatible with the upstreamed version anyway (and when these other units are eventually updated, they will get a fresh dtb as well, so that is not a significant problem either). All of that is of course assuming that noone else has managed to build something that can use this driver, but that seems extremely improbable. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850Peter Rosin3-0/+484
The TSE-850 is an FM Transmitter Station Equipment, designed to generate baseband signals for FM, mainly the DARC subcarrier, but other signals are also possible. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16ASoC: atmel_ssc_dai: if not provided, default to sensible dividersPeter Rosin2-7/+77
When this driver masters BCLK and/or LRCLK, and noone has stated differently, assume that all the bits of a frame are used. This relieves the cpu dai users from the duty to fill in the dividers for the common case. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24ASoC: atmel_wm8904: constify snd_soc_ops structuresJulia Lawall1-1/+1
Check for snd_soc_ops structures that are only stored in the ops field of a snd_soc_dai_link structure. This field is declared const, so snd_soc_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_soc_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_dai_link e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i, e; position p; @@ struct snd_soc_dai_link e[] = { ..., { .ops = &i@p, }, ..., }; @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_soc_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_soc_ops i = { ... }; // </smpl> The effect on the layout of the .o file is shown by the following output of the size command, first before then after the transformation: text data bss dec hex filename 2611 1536 0 4147 1033 sound/soc/atmel/atmel_wm8904.o 2675 1480 0 4155 103b sound/soc/atmel/atmel_wm8904.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ak4104', ↵Mark Brown2-10/+16
'asoc/topic/arizona', 'asoc/topic/atmel' and 'asoc/topic/codec-component' into asoc-next
2016-09-29Merge remote-tracking branch 'asoc/topic/pcm' into asoc-nextMark Brown1-1/+1
2016-09-12ASoC: constify snd_pcm_ops structuresJulia Lawall1-1/+1
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16ASoC: atmel-pdmic: Fix typos in comments and error messagesPeter Meerwald-Stadler1-4/+4
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startupChristoph Huber1-2/+3
commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by: Christoph Huber <c.huber@bct-electronic.com> Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-08-11ASoC: atmel-pdmic: add missing clk_disable_unprepare() on error in ↵Wei Yongjun1-1/+3
atmel_pdmic_cpu_dai_startup() Add the missing clk_disable_unprepare() before return from atmel_pdmic_cpu_dai_startup() in the error handling case. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-11ASoC: atmel-pdmic: mark symbols static where possibleBaoyou Xie1-1/+1
We get 1 warning about global functions without a declaration in the ASoC atmel-pdmic driver when building with W=1: sound/soc/atmel/atmel-pdmic.c:286:5: warning: no previous prototype for 'pdmic_get_mic_volsw' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: codec duplicated callback function goes to component on atmel-pdmicKuninori Morimoto1-2/+4
codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: codec duplicated callback function goes to component on atmel-classdKuninori Morimoto1-2/+4
codec driver and component driver has duplicated callback functions, and codec side functions are just copied to component side when register timing. This was quick-hack, but no longer needed. This patch moves these functions from codec driver to component driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07ASoC: atmel_ssc_dai: Fix DMA params for different SSCPeter Meerwald1-1/+1
follow-up patch from c706f2e55f ASoC: atmel_ssc_dai: distinguish the different SSC cpu_dai id is always 0, use platform_device id to distinguish DMA parameters of SSCs Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04ASoC: atmel-pdmic: Simplify use of devm_ioremap_resourceAmitoj Kaur Chawla1-5/+0
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04ASoC: Atmel: ClassD: Simplify use of devm_ioremap_resourceAmitoj Kaur Chawla1-5/+0
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-06ASoC: atmel: fix build failureSudip Mukherjee1-0/+1
m32r allmodconfig build is failing with the error: ERROR: "bad_dma_ops" [sound/soc/atmel/snd-soc-atmel-pcm-pdc.ko] undefined! The code is using DMA but the related dependency is not mentioned in the Kconfig. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-27ASoC: atmel_ssc_dai: read DSP mode A data on rising edges of bclkPeter Rosin1-2/+2
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: atmel_ssc_dai: distinguish the different SSCSongjun Wu1-9/+18
Cpu_dai id always equals 0, can't distinguish the different SSC. Use platform_device id to record and distinguish the different SSC. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-23Merge remote-tracking branches 'asoc/topic/atmel-classd', 'asoc/topic/const' ↵Mark Brown1-4/+8
and 'asoc/topic/da7218' into asoc-next
2015-12-23ASoC: atmel_wm8904: add snd_soc_pm_opsSongjun Wu1-0/+1
Sometimes the audio play can not be resumed after it is suspended. Add snd_soc_pm_ops to execute power management operations, then this issue is fixed. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: atmel-pdmic: add the Pulse Density Modulation Interface ControllerSongjun Wu4-0/+829
Add driver for the Pulse Density Modulation Interface Controller. It comes with digitallly controlled gain, a High-Pass and a SINCC filter. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-12ASoC: Atmel: ClassD: unregister codec when error occursSongjun Wu1-4/+10
Add code to unregister codec in probe function, when the error occurs after the codec is registered. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20ASoC: Atmel: ClassD: supports mono audioSongjun Wu1-4/+8
Modify the code to support mono audio. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26Merge remote-tracking branches 'asoc/topic/atmel-classd' and ↵Mark Brown4-0/+810
'asoc/topic/da7213' into asoc-next
2015-10-23ASoC: atmel-classd: add the Audio Class D AmplifierSongjun Wu4-0/+810
Add driver for the digital imput to PWM output stereo class D amplifier. It comes with filter, digitally controlled gain, an equalizer and a dmphase filter. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14ASoC: atmel_wm8904: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-04ASoC: atmel_ssc_dai: Correct misuse of 0x%<decimal>Joe Perches1-1/+1
Correct misuse of 0x%d in logging message. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-22Merge remote-tracking branches 'asoc/topic/adsp' and 'asoc/topic/atmel' into ↵Mark Brown2-11/+22
asoc-next
2015-06-12ASoC: atmel: properly select dma driver stateAlexandre Belloni1-6/+15
It is currently possible to have CONFIG_SND_ATMEL_SOC_SSC=y with either CONFIG_SND_ATMEL_SOC_PDC=m or CONFIG_SND_ATMEL_SOC_DMA=m. This results in a driver that compiles but does not link with this kind of error: sound/built-in.o: In function `atmel_ssc_set_audio': (.text+0x87d90): undefined reference to `atmel_pcm_pdc_platform_register' sound/built-in.o: In function `atmel_ssc_put_audio': (.text+0x8879a): undefined reference to `atmel_pcm_pdc_platform_unregister' Introduce new config options SND_ATMEL_SOC_SSC_PDC and SND_ATMEL_SOC_SSC_DMA which should be used by the board drivers and the correct logic to properly select the SND_ATMEL_SOC_PDC and SND_ATMEL_SOC_DMA states. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: atmel: Revert previous fix for Kconfig limationsAlexandre Belloni2-5/+7
After discussing with the Kconfig maintainer, we found a better fiw allowing to keep each driver as modules. This reverts commit 0ef9dc139db2fca304ce4eadb5b8fb40d3dedb5e. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/adav80x', ↵Mark Brown3-24/+14
'asoc/topic/arizona' and 'asoc/topic/atmel' into asoc-next
2015-05-26ASoC: atmel: compile pcm driver in snd-soc-atmel_ssc_daiAlexandre Belloni2-7/+5
It is currently possible to have CONFIG_SND_ATMEL_SOC_SSC=y with either CONFIG_SND_ATMEL_SOC_PDC=m or CONFIG_SND_ATMEL_SOC_DMA=m. This results in a driver that compiles but does not link with this kind of error: sound/built-in.o: In function `atmel_ssc_set_audio': (.text+0x87d90): undefined reference to `atmel_pcm_pdc_platform_register' sound/built-in.o: In function `atmel_ssc_put_audio': (.text+0x8879a): undefined reference to `atmel_pcm_pdc_platform_unregister' Solve that by compiling the selected PCM driver (PDC, DMA or both) in the Atmel SSC DAI driver. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-26ASoC: atmel: simplify KconfigAlexandre Belloni1-10/+6
Enclose the options in if SND_ATMEL_SOC ... endif to remove the dependency. Also remove the useless description for SND_ATMEL_SOC_SSC. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: dmaengine_pcm: Make FLAG_NO_RESIDUE internalLars-Peter Clausen1-2/+1
Whether residue can be reported or not is not a property of the audio controller but of the DMA controller. The FLAG_NO_RESIDUE was initially added when the DMAengine framework had no support for describing the residue reporting capabilities of the controller. Support for this was added quite a while ago and recently the DMAengine framework started to complain if a driver does not describe its capabilities and a lot of patches have been merged that add support for this where it was missing. So it should be safe to assume that driver on actively used platforms properly implement the DMA capabilities API. This patch makes the FLAG_NO_RESIDUE internal and no longer allows audio controller drivers to manually set the flag. If a DMA driver against expectations does not support reporting its capabilities for now the generic DMAengine PCM driver will now emit a warning and simply assume that residue reporting is not supported. In the future this might be changed to aborting with an error. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: at91sam9g20ek: Automatically disconnect non-connected pinsLars-Peter Clausen1-7/+3
According to the schematics the both LHPOUT and RHPOUT are connected to the external connector. RHPOUT is missing from the DAPM routes, but otherwise they seem to be complete. This patch adds the missing route and then sets the fully_routed flag for the card. This allows to remove all the manual calls to snd_soc_dapm_nc_pin(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-12Merge remote-tracking branches 'asoc/topic/4554', 'asoc/topic/ab8500', ↵Mark Brown6-133/+87
'asoc/topic/ak4642', 'asoc/topic/arizona' and 'asoc/topic/atmel' into asoc-next
2015-04-12ASoC: atmel: Improve machine driver compile test coverageLars-Peter Clausen1-3/+6
The Atmel ASoC machine drivers don't have any compile time arch dependencies anymore. Make it possible to select them when COMPILE_TEST is enabled to get better compile test coverage. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-12ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessaryLars-Peter Clausen1-2/+2
The SND_AT91_SOC_SAM9G20_WM8731 and SND_AT91_SOC_SAM9X5_WM8731 machine driver symbols select SND_SOC_WM8731 which depends on SND_SOC_I2C_AND_SPI. So the machine driver symbols need to depend on SND_SOC_I2C_AND_SPI as well, otherwise we might end up with a invalid configuration, which will sooner or later upset the randconfig auto-builders. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-02ASoC: atmel-pcm-dma: increase buffer_bytes_maxAlexandre Belloni1-2/+2
atmel-pcm-dma is not limited to a buffer size of 64kB like atmel-pcm-pdc. Increase buffer_bytes_max to 512kB to allow for higher bit rates (i.e. 32bps at 192kHz) to work correctly. By default, keep the prealloc at 64kB. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01ASoC: atmel-pcm-pdc: merge atmel-pcm back inAlexandre Belloni4-128/+79
atmel-pcm.c was split into two files to create a generic framework for both PDC and DMA. atmel-pcm-dma.c is using the generic dmaengine framework since 95e0e07e710e (ASoC: atmel-pcm: use generic dmaengine framework). Merge atmel-pcm.c in atmel-pcm-pdc.c as this is now the only user. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/davinci', ↵Mark Brown2-4/+108
'asoc/topic/gpiod' and 'asoc/topic/intel' into asoc-next
2015-03-02ASoC: sam9g20_wm8731: drop machine_is_xxxAlexandre Belloni1-37/+31
Atmel based boards can now only be used with device tree. Drop non DT initialization. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-10ASoC: atmel_ssc_dai: Allow more ratesPeter Rosin2-4/+108
When the SSC acts as BCK master, use a ratnum rule to limit the rate instead of only doing the standard rates. When the SSC acts as BCK slave, allow any BCK frequency up to the SSC master clock, divided by either of 2, 3 or 6. Put a cap at 384kHz. Who's /ever/ going to need more than that? The divider of 2, 3 or 6 is selected based on the Serial Clock Ratio Considerations section from the SSC documentation: The Transmitter and the Receiver can be programmed to operate with the clock signals provided on either the TK or RK pins. This allows the SSC to support many slave-mode data transfers. In this case, the maximum clock speed allowed on the RK pin is: - Peripheral clock divided by 2 if Receiver Frame Synchro is input - Peripheral clock divided by 3 if Receiver Frame Synchro is output In addition, the maximum clock speed allowed on the TK pin is: - Peripheral clock divided by 6 if Transmit Frame Synchro is input - Peripheral clock divided by 2 if Transmit Frame Synchro is output Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-09Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/dai' and ↵Mark Brown1-28/+2
'asoc/topic/davinci' into asoc-next
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 17:52:37 +0000