summaryrefslogtreecommitdiffstats
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2019-06-14net: add high_order_alloc_disable sysctl/static keyEric Dumazet2-1/+10
>From linux-3.7, (commit 5640f7685831 "net: use a per task frag allocator") TCP sendmsg() has preferred using order-3 allocations. While it gives good results for most cases, we had reports that heavy uses of TCP over loopback were hitting a spinlock contention in page allocations/freeing. This commits adds a sysctl so that admins can opt-in for order-0 allocations. Hopefully mm layer might optimize order-3 allocations in the future since it could give us a nice boost (see 8 lines of following benchmark) The following benchmark shows a win when more than 8 TCP_STREAM threads are running (56 x86 cores server in my tests) for thr in {1..30} do sysctl -wq net.core.high_order_alloc_disable=0 T0=`./super_netperf $thr -H 127.0.0.1 -l 15` sysctl -wq net.core.high_order_alloc_disable=1 T1=`./super_netperf $thr -H 127.0.0.1 -l 15` echo $thr:$T0:$T1 done 1: 49979: 37267 2: 98745: 76286 3: 141088: 110051 4: 177414: 144772 5: 197587: 173563 6: 215377: 208448 7: 241061: 234087 8: 267155: 263373 9: 295069: 297402 10: 312393: 335213 11: 340462: 368778 12: 371366: 403954 13: 412344: 443713 14: 426617: 473580 15: 474418: 507861 16: 503261: 538539 17: 522331: 563096 18: 532409: 567084 19: 550824: 605240 20: 525493: 641988 21: 564574: 665843 22: 567349: 690868 23: 583846: 710917 24: 588715: 736306 25: 603212: 763494 26: 604083: 792654 27: 602241: 796450 28: 604291: 797993 29: 611610: 833249 30: 577356: 841062 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14tcp: add tcp_tx_skb_cache sysctlEric Dumazet1-0/+8
Feng Tang reported a performance regression after introduction of per TCP socket tx/rx caches, for TCP over loopback (netperf) There is high chance the regression is caused by a change on how well the 32 KB per-thread page (current->task_frag) can be recycled, and lack of pcp caches for order-3 pages. I could not reproduce the regression myself, cpus all being spinning on the mm spinlocks for page allocs/freeing, regardless of enabling or disabling the per tcp socket caches. It seems best to disable the feature by default, and let admins enabling it. MM layer either needs to provide scalable order-3 pages allocations, or could attempt a trylock on zone->lock if the caller only attempts to get a high-order page and is able to fallback to order-0 ones in case of pressure. Tests run on a 56 cores host (112 hyper threads) - 35.49% netperf [kernel.vmlinux] [k] queued_spin_lock_slowpath - 35.49% queued_spin_lock_slowpath - 18.18% get_page_from_freelist - __alloc_pages_nodemask - 18.18% alloc_pages_current skb_page_frag_refill sk_page_frag_refill tcp_sendmsg_locked tcp_sendmsg inet_sendmsg sock_sendmsg __sys_sendto __x64_sys_sendto do_syscall_64 entry_SYSCALL_64_after_hwframe __libc_send + 17.31% __free_pages_ok + 31.43% swapper [kernel.vmlinux] [k] intel_idle + 9.12% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 6.53% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 0.69% netserver [kernel.vmlinux] [k] queued_spin_lock_slowpath + 0.68% netperf [kernel.vmlinux] [k] skb_release_data + 0.52% netperf [kernel.vmlinux] [k] tcp_sendmsg_locked 0.46% netperf [kernel.vmlinux] [k] _raw_spin_lock_irqsave Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Feng Tang <feng.tang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14tcp: add tcp_rx_skb_cache sysctlEric Dumazet1-0/+9
Instead of relying on rps_needed, it is safer to use a separate static key, since we do not want to enable TCP rx_skb_cache by default. This feature can cause huge increase of memory usage on hosts with millions of sockets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: sched: flower: don't call synchronize_rcu() on mask creationVlad Buslov1-16/+18
Current flower mask creating code assumes that temporary mask that is used when inserting new filter is stack allocated. To prevent race condition with data patch synchronize_rcu() is called every time fl_create_new_mask() replaces temporary stack allocated mask. As reported by Jiri, this increases runtime of creating 20000 flower classifiers from 4 seconds to 163 seconds. However, this design is no longer necessary since temporary mask was converted to be dynamically allocated by commit 2cddd2014782 ("net/sched: cls_flower: allocate mask dynamically in fl_change()"). Remove synchronize_rcu() calls from mask creation code. Instead, refactor fl_change() to always deallocate temporary mask with rcu grace period. Fixes: 195c234d15c9 ("net: sched: flower: handle concurrent mask insertion") Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Tested-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14sctp: Free cookie before we memdup a new oneNeil Horman1-0/+8
Based on comments from Xin, even after fixes for our recent syzbot report of cookie memory leaks, its possible to get a resend of an INIT chunk which would lead to us leaking cookie memory. To ensure that we don't leak cookie memory, free any previously allocated cookie first. Change notes v1->v2 update subsystem tag in subject (davem) repeat kfree check for peer_random and peer_hmacs (xin) v2->v3 net->sctp also free peer_chunks v3->v4 fix subject tags v4->v5 remove cut line Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'mac80211-for-davem-2019-06-14' of ↵David S. Miller14-39/+153
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes, all over: * a few memory leaks * fixes for management frame protection security and A2/A3 confusion (affecting TDLS as well) * build fix for certificates * etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14nfc: Ensure presence of required attributes in the deactivate_target handlerYoung Xiao1-1/+2
Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to accessing them. This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Signed-off-by: Young Xiao <92siuyang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14cfg80211: report measurement start TSF correctlyAvraham Stern1-2/+2
Instead of reporting the AP's TSF, host time was reported. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14cfg80211: fix memory leak of wiphy device nameEric Biggers1-1/+1
In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak. Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14cfg80211: util: fix bit count off by oneMordechay Goodstein1-1/+1
The bits of Rx MCS Map in VHT capability were enumerated with index transform - index i -> (i + 1) bit => nss i. BUG! while it should be - index i -> (i + 1) bit => (i + 1) nss. The bug was exposed in commit a53b2a0b1245 ("iwlwifi: mvm: implement VHT extended NSS support in rs.c"), where iwlwifi started using the function. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: b0aa75f0b1b2 ("ieee80211: add new VHT capability fields/parsing") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: do not start any work during reconfigure flowNaftali Goldstein2-0/+11
It is not a good idea to try to perform any work (e.g. send an auth frame) during reconfigure flow. Prevent this from happening, and at the end of the reconfigure flow requeue all the works. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()Luca Coelho1-2/+2
The seen_indices variable is u64 and in other parts of the code we assume mbssid_index_ie[2] can be up to 45, so we should use the 64-bit versions of BIT, namely, BIT_ULL(). Reported-by: Dan Carpented <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: only warn once on chanctx_conf being NULLYibo Zhao1-1/+1
In multiple SSID cases, it takes time to prepare every AP interface to be ready in initializing phase. If a sta already knows everything it needs to join one of the APs and sends authentication to the AP which is not fully prepared at this point of time, AP's channel context could be NULL. As a result, warning message occurs. Even worse, if the AP is under attack via tools such as MDK3 and massive authentication requests are received in a very short time, console will be hung due to kernel warning messages. WARN_ON_ONCE() could be a better way for indicating warning messages without duplicate messages to flood the console. Johannes: We still need to address the underlying problem, but we don't really have a good handle on it yet. Suppress the worst side-effects for now. Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> [johannes: add note, change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: drop robust management frames from unknown TAJohannes Berg1-0/+2
When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-12net: tls, correctly account for copied bytes with multiple sk_msgsJohn Fastabend1-1/+0
tls_sw_do_sendpage needs to return the total number of bytes sent regardless of how many sk_msgs are allocated. Unfortunately, copied (the value we return up the stack) is zero'd before each new sk_msg is allocated so we only return the copied size of the last sk_msg used. The caller (splice, etc.) of sendpage will then believe only part of its data was sent and send the missing chunks again. However, because the data actually was sent the receiver will get multiple copies of the same data. To reproduce this do multiple sendfile calls with a length close to the max record size. This will in turn call splice/sendpage, sendpage may use multiple sk_msg in this case and then returns the incorrect number of bytes. This will cause splice to resend creating duplicate data on the receiver. Andre created a C program that can easily generate this case so we will push a similar selftest for this to bpf-next shortly. The fix is to _not_ zero the copied field so that the total sent bytes is returned. Reported-by: Steinar H. Gunderson <steinar+kernel@gunderson.no> Reported-by: Andre Tomt <andre@tomt.net> Tested-by: Andre Tomt <andre@tomt.net> Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12vrf: Increment Icmp6InMsgs on the original netdevStephen Suryaputra2-8/+13
Get the ingress interface and increment ICMP counters based on that instead of skb->dev when the the dev is a VRF device. This is a follow up on the following message: https://www.spinics.net/lists/netdev/msg560268.html v2: Avoid changing skb->dev since it has unintended effect for local delivery (David Ahern). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ethtool: Allow matching on vlan DEI bitMaxime Chevallier1-0/+5
Using ethtool, users can specify a classification action matching on the full vlan tag, which includes the DEI bit (also previously called CFI). However, when converting the ethool_flow_spec to a flow_rule, we use dissector keys to represent the matching patterns. Since the vlan dissector key doesn't include the DEI bit, this information was silently discarded when translating the ethtool flow spec in to a flow_rule. This commit adds the DEI bit into the vlan dissector key, and allows propagating the information to the driver when parsing the ethtool flow spec. Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12mpls: fix af_mpls dependencies for realMatteo Croce1-1/+1
Randy reported that selecting MPLS_ROUTING without PROC_FS breaks the build, because since commit c1a9d65954c6 ("mpls: fix af_mpls dependencies"), MPLS_ROUTING selects PROC_SYSCTL, but Kconfig's select doesn't recursively handle dependencies. Change the select into a dependency. Fixes: c1a9d65954c6 ("mpls: fix af_mpls dependencies") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net: openvswitch: do not free vport if register_netdevice() is failed.Taehee Yoo1-6/+12
In order to create an internal vport, internal_dev_create() is used and that calls register_netdevice() internally. If register_netdevice() fails, it calls dev->priv_destructor() to free private data of netdev. actually, a private data of this is a vport. Hence internal_dev_create() should not free and use a vport after failure of register_netdevice(). Test command ovs-dpctl add-dp bonding_masters Splat looks like: [ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240 [ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch] [ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4 [ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206 [ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704 [ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560 [ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881 [ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000 [ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698 [ 1035.777709] FS: 00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 [ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0 [ 1035.777709] Call Trace: [ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch] [ 1035.777709] new_vport+0x15/0x1e0 [openvswitch] [ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch] [ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch] [ 1035.777709] ? __kmalloc+0x131/0x2e0 [ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030 [ 1035.777709] genl_family_rcv_msg+0x63a/0x1030 [ 1035.777709] ? genl_unregister_family+0x630/0x630 [ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0 [ ... ] Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net: correct udp zerocopy refcnt also when zerocopy only on appendWillem de Bruijn2-2/+2
The below patch fixes an incorrect zerocopy refcnt increment when appending with MSG_MORE to an existing zerocopy udp skb. send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt 1 send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt still 1 (bar frags) But it missed that zerocopy need not be passed at the first send. The right test whether the uarg is newly allocated and thus has extra refcnt 1 is not !skb, but !skb_zcopy. send(.., MSG_MORE); // <no uarg> send(.., MSG_ZEROCOPY); // refcnt 1 Fixes: 100f6d8e09905 ("net: correct zerocopy refcnt with udp MSG_MORE") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09tcp: fix undo spurious SYNACK in passive Fast OpenYuchung Cheng1-1/+1
Commit 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") may cause tcp_fastretrans_alert() to warn about pending retransmission in Open state. This is triggered when the Fast Open server both sends data and has spurious SYNACK retransmission during the handshake, and the data packets were lost or reordered. The root cause is a bit complicated: (1) Upon receiving SYN-data: a full socket is created with snd_una = ISN + 1 by tcp_create_openreq_child() (2) On SYNACK timeout the server/sender enters CA_Loss state. (3) Upon receiving the final ACK to complete the handshake, sender does not mark FLAG_SND_UNA_ADVANCED since (1) Sender then calls tcp_process_loss since state is CA_loss by (2) (4) tcp_process_loss() does not invoke undo operations but instead mark REXMIT_LOST to force retransmission (5) tcp_rcv_synrecv_state_fastopen() calls tcp_try_undo_loss(). It changes state to CA_Open but has positive tp->retrans_out (6) Next ACK triggers the WARN_ON in tcp_fastretrans_alert() The step that goes wrong is (4) where the undo operation should have been invoked because the ACK successfully acknowledged the SYN sequence. This fixes that by specifically checking undo when the SYN-ACK sequence is acknowledged. Then after tcp_process_loss() the state would be further adjusted based in tcp_fastretrans_alert() to avoid triggering the warning in (6). Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09mpls: fix af_mpls dependenciesMatteo Croce1-0/+1
MPLS routing code relies on sysctl to work, so let it select PROC_SYSCTL. Reported-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09Merge tag 'linux-can-fixes-for-5.2-20190607' of ↵David S. Miller1-3/+22
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-06-07 this is a pull reqeust of 9 patches for net/master. The first patch is by Alexander Dahl and removes a duplicate menu entry from the Kconfig. The next patch by Joakim Zhang fixes the timeout in the flexcan driver when setting small bit rates. Anssi Hannula's patch for the xilinx_can driver fixes the bittiming_const for CAN FD core. The two patches by Sean Nyekjaer bring mcp25625 to the existing mcp251x driver. The patch by Eugen Hristev implements an errata for the m_can driver. YueHaibing's patch fixes the error handling ing can_init(). The patch by Fabio Estevam for the flexcan driver removes an unneeded registration message during flexcan_probe(). And the last patch is by Willem de Bruijn and adds the missing purging the socket error queue on sock destruct. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09mpls: fix warning with multi-label encapGeorge Wilkie1-1/+1
If you configure a route with multiple labels, e.g. ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4 A warning is logged: kernel: [ 130.561819] netlink: 'ip': attribute type 1 has an invalid length. This happens because mpls_iptunnel_policy has set the type of MPLS_IPTUNNEL_DST to fixed size NLA_U32. Change it to a minimum size. nla_get_labels() does the remaining validation. Fixes: e3e4712ec096 ("mpls: ip tunnel support") Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zeroEric Dumazet1-3/+4
Before taking a refcount, make sure the object is not already scheduled for deletion. Same fix is needed in ipv6_flowlabel_opt() Fixes: 18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: ipv4: fib_semantics: fix uninitialized variableEnrico Weigelt1-1/+1
fix an uninitialized variable: CC net/ipv4/fib_semantics.o net/ipv4/fib_semantics.c: In function 'fib_check_nh_v4_gw': net/ipv4/fib_semantics.c:1027:12: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] if (!tbl || err) { ^~ Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-6/+39
Daniel Borkmann says: ==================== pull-request: bpf 2019-06-07 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix several bugs in riscv64 JIT code emission which forgot to clear high 32-bits for alu32 ops, from Björn and Luke with selftests covering all relevant BPF alu ops from Björn and Jiong. 2) Two fixes for UDP BPF reuseport that avoid calling the program in case of __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption that skb->data is pointing to transport header, from Martin. 3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog workqueue, and a missing restore of sk_write_space when psock gets dropped, from Jakub and John. 4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it breaks standard applications like DNS if reverse NAT is not performed upon receive, from Daniel. 5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6 fails to verify that the length of the tuple is long enough, from Lorenz. 6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for {un,}successful probe) as that is expected to be propagated as an fd to load_sk_storage_btf() and thus closing the wrong descriptor otherwise, from Michal. 7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir. 8) Minor misc fixes in docs, samples and selftests, from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07can: purge socket error queue on sock destructWillem de Bruijn1-0/+1
CAN supports software tx timestamps as of the below commit. Purge any queued timestamp packets on socket destroy. Fixes: 51f31cabe3ce ("ip: support for TX timestamps on UDP and RAW sockets") Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-06-07can: af_can: Fix error path of can_init()YueHaibing1-3/+21
This patch add error path for can_init() to avoid possible crash if some error occurs. Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-59/+92
Pull networking fixes from David Miller: 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn. 2) Read SFP eeprom in max 16 byte increments to avoid problems with some SFP modules, from Russell King. 3) Fix UDP socket lookup wrt. VRF, from Tim Beale. 4) Handle route invalidation properly in s390 qeth driver, from Julian Wiedmann. 5) Memory leak on unload in RDS, from Zhu Yanjun. 6) sctp_process_init leak, from Neil HOrman. 7) Fix fib_rules rule insertion semantic change that broke Android, from Hangbin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock ...
2019-06-06bpf: fix unconnected udp hooksDaniel Borkmann3-0/+10
Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently to applications as also stated in original motivation in 7828f20e3779 ("Merge branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter two hooks into Cilium to enable host based load-balancing with Kubernetes, I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes typically sets up DNS as a service and is thus subject to load-balancing. Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API is currently insufficient and thus not usable as-is for standard applications shipped with most distros. To break down the issue we ran into with a simple example: # cat /etc/resolv.conf nameserver 147.75.207.207 nameserver 147.75.207.208 For the purpose of a simple test, we set up above IPs as service IPs and transparently redirect traffic to a different DNS backend server for that node: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 The attached BPF program is basically selecting one of the backends if the service IP/port matches on the cgroup hook. DNS breaks here, because the hooks are not transparent enough to applications which have built-in msg_name address checks: # nslookup 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ;; connection timed out; no servers could be reached # dig 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; connection timed out; no servers could be reached For comparison, if none of the service IPs is used, and we tell nslookup to use 8.8.8.8 directly it works just fine, of course: # nslookup 1.1.1.1 8.8.8.8 1.1.1.1.in-addr.arpa name = one.one.one.one. In order to fix this and thus act more transparent to the application, this needs reverse translation on recvmsg() side. A minimal fix for this API is to add similar recvmsg() hooks behind the BPF cgroups static key such that the program can track state and replace the current sockaddr_in{,6} with the original service IP. From BPF side, this basically tracks the service tuple plus socket cookie in an LRU map where the reverse NAT can then be retrieved via map value as one example. Side-note: the BPF cgroups static key should be converted to a per-hook static key in future. Same example after this fix: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 Lookups work fine now: # nslookup 1.1.1.1 1.1.1.1.in-addr.arpa name = one.one.one.one. Authoritative answers can be found from: # dig 1.1.1.1 ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 512 ;; QUESTION SECTION: ;1.1.1.1. IN A ;; AUTHORITY SECTION: . 23426 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400 ;; Query time: 17 msec ;; SERVER: 147.75.207.207#53(147.75.207.207) ;; WHEN: Tue May 21 12:59:38 UTC 2019 ;; MSG SIZE rcvd: 111 And from an actual packet level it shows that we're using the back end server when talking via 147.75.207.20{7,8} front end: # tcpdump -i any udp [...] 12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) [...] In order to be flexible and to have same semantics as in sendmsg BPF programs, we only allow return codes in [1,1] range. In the sendmsg case the program is called if msg->msg_name is present which can be the case in both, connected and unconnected UDP. The former only relies on the sockaddr_in{,6} passed via connect(2) if passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar way to call into the BPF program whenever a non-NULL msg->msg_name was passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note that for TCP case, the msg->msg_name is ignored in the regular recvmsg path and therefore not relevant. For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE, the hook is not called. This is intentional as it aligns with the same semantics as in case of TCP cgroup BPF hooks right now. This might be better addressed in future through a different bpf_attach_type such that this case can be distinguished from the regular recvmsg paths, for example. Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-06Merge tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds2-17/+16
Pull NFS client fixes from Anna Schumaker: "These are mostly stable bugfixes found during testing, many during the recent NFS bake-a-thon. Stable bugfixes: - SUNRPC: Fix regression in umount of a secure mount - SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential - NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter - NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled Other bugfixes: - xprtrdma: Use struct_size() in kzalloc()" * tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential SUNRPC fix regression in umount of a secure mount xprtrdma: Use struct_size() in kzalloc()
2019-06-06pktgen: do not sleep with the thread lock held.Paolo Abeni1-0/+11
Currently, the process issuing a "start" command on the pktgen procfs interface, acquires the pktgen thread lock and never release it, until all pktgen threads are completed. The above can blocks indefinitely any other pktgen command and any (even unrelated) netdevice removal - as the pktgen netdev notifier acquires the same lock. The issue is demonstrated by the following script, reported by Matteo: ip -b - <<'EOF' link add type dummy link add type veth link set dummy0 up EOF modprobe pktgen echo reset >/proc/net/pktgen/pgctrl { echo rem_device_all echo add_device dummy0 } >/proc/net/pktgen/kpktgend_0 echo count 0 >/proc/net/pktgen/dummy0 echo start >/proc/net/pktgen/pgctrl & sleep 1 rmmod veth Fix the above releasing the thread lock around the sleep call. Additionally we must prevent racing with forcefull rmmod - as the thread lock no more protects from them. Instead, acquire a self-reference before waiting for any thread. As a side effect, running rmmod pktgen while some thread is running now fails with "module in use" error, before this patch such command hanged indefinitely. Note: the issue predates the commit reported in the fixes tag, but this fix can't be applied before the mentioned commit. v1 -> v2: - no need to check for thread existence after flipping the lock, pktgen threads are freed only at net exit time - Fixes: 6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06net: rds: fix memory leak in rds_ib_flush_mr_poolZhu Yanjun1-4/+6
When the following tests last for several hours, the problem will occur. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30 The following will occur. " Starting up.... tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 " >From vmcore, we can find that clean_list is NULL. >From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker. Then rds_ib_mr_pool_flush_worker calls " rds_ib_flush_mr_pool(pool, 0, NULL); " Then in function " int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool, int free_all, struct rds_ib_mr **ibmr_ret) " ibmr_ret is NULL. In the source code, " ... list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail); if (ibmr_ret) *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode); /* more than one entry in llist nodes */ if (clean_nodes->next) llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list); ... " When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next instead of clean_nodes is added in clean_list. So clean_nodes is discarded. It can not be used again. The workqueue is executed periodically. So more and more clean_nodes are discarded. Finally the clean_list is NULL. Then this problem will occur. Fixes: 1bc144b62524 ("net, rds, Replace xlist in net/rds/xlist.h with llist") Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06ipv6: fix EFAULT on sendto with icmpv6 and hdrinclOlivier Matz1-5/+8
The following code returns EFAULT (Bad address): s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6); setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1); sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */ The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW instead of IPPROTO_ICMPV6. The failure happens because 2 bytes are eaten from the msghdr by rawv6_probe_proto_opt() starting from commit 19e3c66b52ca ("ipv6 equivalent of "ipv4: Avoid reading user iov twice after raw_probe_proto_opt""), but at that time it was not a problem because IPV6_HDRINCL was not yet introduced. Only eat these 2 bytes if hdrincl == 0. Fixes: 715f504b1189 ("ipv6: add IPV6_HDRINCL option for raw sockets") Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06ipv6: use READ_ONCE() for inet->hdrincl as in ipv4Olivier Matz1-2/+10
As it was done in commit 8f659a03a0ba ("net: ipv4: fix for a race condition in raw_sendmsg") and commit 20b50d79974e ("net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the value of inet->hdrincl in a local variable, to avoid introducing a race condition in the next commit. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05Revert "fib_rules: return 0 directly if an exactly same rule exists when ↵Hangbin Liu1-3/+3
NLM_F_EXCL not supplied" This reverts commit e9919a24d3022f72bcadc407e73a6ef17093a849. Nathan reported the new behaviour breaks Android, as Android just add new rules and delete old ones. If we return 0 without adding dup rules, Android will remove the new added rules and causing system to soft-reboot. Fixes: e9919a24d302 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Yaro Slav <yaro330@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05ethtool: fix potential userspace buffer overflowVivien Didelot1-1/+4
ethtool_get_regs() allocates a buffer of size ops->get_regs_len(), and pass it to the kernel driver via ops->get_regs() for filling. There is no restriction about what the kernel drivers can or cannot do with the open ethtool_regs structure. They usually set regs->version and ignore regs->len or set it to the same size as ops->get_regs_len(). But if userspace allocates a smaller buffer for the registers dump, we would cause a userspace buffer overflow in the final copy_to_user() call, which uses the regs.len value potentially reset by the driver. To fix this, make this case obvious and store regs.len before calling ops->get_regs(), to only copy as much data as requested by userspace, up to the value returned by ops->get_regs_len(). While at it, remove the redundant check for non-null regbuf. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05Fix memory leak in sctp_process_initNeil Horman2-10/+8
syzbot found the following leak in sctp_process_init BUG: memory leak unreferenced object 0xffff88810ef68400 (size 1024): comm "syz-executor273", pid 7046, jiffies 4294945598 (age 28.770s) hex dump (first 32 bytes): 1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25 ..(........h...% 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline] [<00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675 [<000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119 [<00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline] [<00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20 net/sctp/sm_make_chunk.c:2437 [<00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682 [inline] [<00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384 [inline] [<00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194 [inline] [<00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165 [<0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200 net/sctp/associola.c:1074 [<00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95 [<00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354 [<00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline] [<00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418 [<00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934 [<00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122 [<00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802 [<00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292 [<000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330 [<00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline] [<00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline] [<00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337 [<00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3 The problem was that the peer.cookie value points to an skb allocated area on the first pass through this function, at which point it is overwritten with a heap allocated value, but in certain cases, where a COOKIE_ECHO chunk is included in the packet, a second pass through sctp_process_init is made, where the cookie value is re-allocated, leaking the first allocation. Fix is to always allocate the cookie value, and free it when we are done using it. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05net: rds: fix memory leak when unload rds_rdmaZhu Yanjun2-1/+4
When KASAN is enabled, after several rds connections are created, then "rmmod rds_rdma" is run. The following will appear. " BUG rds_ib_incoming (Not tainted): Objects remaining in rds_ib_incoming on __kmem_cache_shutdown() Call Trace: dump_stack+0x71/0xab slab_err+0xad/0xd0 __kmem_cache_shutdown+0x17d/0x370 shutdown_cache+0x17/0x130 kmem_cache_destroy+0x1df/0x210 rds_ib_recv_exit+0x11/0x20 [rds_rdma] rds_ib_exit+0x7a/0x90 [rds_rdma] __x64_sys_delete_module+0x224/0x2c0 ? __ia32_sys_delete_module+0x2c0/0x2c0 do_syscall_64+0x73/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 " This is rds connection memory leak. The root cause is: When "rmmod rds_rdma" is run, rds_ib_remove_one will call rds_ib_dev_shutdown to drop the rds connections. rds_ib_dev_shutdown will call rds_conn_drop to drop rds connections as below. " rds_conn_path_drop(&conn->c_path[0], false); " In the above, destroy is set to false. void rds_conn_path_drop(struct rds_conn_path *cp, bool destroy) { atomic_set(&cp->cp_state, RDS_CONN_ERROR); rcu_read_lock(); if (!destroy && rds_destroy_pending(cp->cp_conn)) { rcu_read_unlock(); return; } queue_work(rds_wq, &cp->cp_down_w); rcu_read_unlock(); } In the above function, destroy is set to false. rds_destroy_pending is called. This does not move rds connections to ib_nodev_conns. So destroy is set to true to move rds connections to ib_nodev_conns. In rds_ib_unregister_client, flush_workqueue is called to make rds_wq finsh shutdown rds connections. The function rds_ib_destroy_nodev_conns is called to shutdown rds connections finally. Then rds_ib_recv_exit is called to destroy slab. void rds_ib_recv_exit(void) { kmem_cache_destroy(rds_ib_incoming_slab); kmem_cache_destroy(rds_ib_frag_slab); } The above slab memory leak will not occur again. >From tests, 256 rds connections [root@ca-dev14 ~]# time rmmod rds_rdma real 0m16.522s user 0m0.000s sys 0m8.152s 512 rds connections [root@ca-dev14 ~]# time rmmod rds_rdma real 0m32.054s user 0m0.000s sys 0m15.568s To rmmod rds_rdma with 256 rds connections, about 16 seconds are needed. And with 512 rds connections, about 32 seconds are needed. >From ftrace, when one rds connection is destroyed, " 19) | rds_conn_destroy [rds]() { 19) 7.782 us | rds_conn_path_drop [rds](); 15) | rds_shutdown_worker [rds]() { 15) | rds_conn_shutdown [rds]() { 15) 1.651 us | rds_send_path_reset [rds](); 15) 7.195 us | } 15) + 11.434 us | } 19) 2.285 us | rds_cong_remove_conn [rds](); 19) * 24062.76 us | } " So if many rds connections will be destroyed, this function rds_ib_destroy_nodev_conns uses most of time. Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05ipv4: not do cache for local delivery if bc_forwarding is enabledXin Long1-12/+12
With the topo: h1 ---| rp1 | | route rp3 |--- h3 (192.168.200.1) h2 ---| rp2 | If rp1 bc_forwarding is set while rp2 bc_forwarding is not, after doing "ping 192.168.200.255" on h1, then ping 192.168.200.255 on h2, and the packets can still be forwared. This issue was caused by the input route cache. It should only do the cache for either bc forwarding or local delivery. Otherwise, local delivery can use the route cache for bc forwarding of other interfaces. This patch is to fix it by not doing cache for local delivery if all.bc_forwarding is enabled. Note that we don't fix it by checking route cache local flag after rt_cache_valid() in "local_input:" and "ip_mkroute_input", as the common route code shouldn't be touched for bc_forwarding. Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04net: fix indirect calls helpers for ptype list hooks.Paolo Abeni1-3/+3
As Eric noted, the current wrapper for ptype func hook inside __netif_receive_skb_list_ptype() has no chance of avoiding the indirect call: we enter such code path only for protocols other than ipv4 and ipv6. Instead we can wrap the list_func invocation. v1 -> v2: - use the correct fix tag Fixes: f5737cbadb7d ("net: use indirect calls helpers for ptype hook") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Edward Cree <ecree@solarflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04udp: only choose unbound UDP socket for multicast when not in a VRFTim Beale1-2/+1
By default, packets received in another VRF should not be passed to an unbound socket in the default VRF. This patch updates the IPv4 UDP multicast logic to match the unicast VRF logic (in compute_score()), as well as the IPv6 mcast logic (in __udp_v6_is_mcast_sock()). The particular case I noticed was DHCP discover packets going to the 255.255.255.255 address, which are handled by __udp4_lib_mcast_deliver(). The previous code meant that running multiple different DHCP server or relay agent instances across VRFs did not work correctly - any server/relay agent in the default VRF received DHCP discover packets for all other VRFs. Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF") Signed-off-by: Tim Beale <timbeale@catalyst.net.nz> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04net/tls: replace the sleeping lock around RX resync with a bit lockJakub Kicinski1-6/+21
Commit 38030d7cb779 ("net/tls: avoid NULL-deref on resync during device removal") tried to fix a potential NULL-dereference by taking the context rwsem. Unfortunately the RX resync may get called from soft IRQ, so we can't use the rwsem to protect from the device disappearing. Because we are guaranteed there can be only one resync at a time (it's called from strparser) use a bit to indicate resync is busy and make device removal wait for the bit to get cleared. Note that there is a leftover "flags" field in struct tls_context already. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04Revert "net/tls: avoid NULL-deref on resync during device removal"Jakub Kicinski1-10/+5
This reverts commit 38030d7cb77963ba84cdbe034806e2b81245339f. Unfortunately the RX resync may get called from soft IRQ, so we can't take the rwsem to protect from the device disappearing. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03bpf: udp: Avoid calling reuseport's bpf_prog from udp_groMartin KaFai Lau2-2/+6
When the commit a6024562ffd7 ("udp: Add GRO functions to UDP socket") added udp[46]_lib_lookup_skb to the udp_gro code path, it broke the reuseport_select_sock() assumption that skb->data is pointing to the transport header. This patch follows an earlier __udp6_lib_err() fix by passing a NULL skb to avoid calling the reuseport's bpf_prog. Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-03bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_errMartin KaFai Lau1-1/+1
__udp6_lib_err() may be called when handling icmpv6 message. For example, the icmpv6 toobig(type=2). __udp6_lib_lookup() is then called which may call reuseport_select_sock(). reuseport_select_sock() will call into a bpf_prog (if there is one). reuseport_select_sock() is expecting the skb->data pointing to the transport header (udphdr in this case). For example, run_bpf_filter() is pulling the transport header. However, in the __udp6_lib_err() path, the skb->data is pointing to the ipv6hdr instead of the udphdr. One option is to pull and push the ipv6hdr in __udp6_lib_err(). Instead of doing this, this patch follows how the original commit 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") was done in IPv4, which has passed a NULL skb pointer to reuseport_select_sock(). Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Cc: Craig Gallek <kraig@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-02packet: unconditionally free po->rolloverWillem de Bruijn1-1/+1
Rollover used to use a complex RCU mechanism for assignment, which had a race condition. The below patch fixed the bug and greatly simplified the logic. The feature depends on fanout, but the state is private to the socket. Fanout_release returns f only when the last member leaves and the fanout struct is to be freed. Destroy rollover unconditionally, regardless of fanout state. Fixes: 57f015f5eccf2 ("packet: fix crash in fanout_demux_rollover()") Reported-by: syzbot <syzkaller@googlegroups.com> Diagnosed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: dsa: sja1105: Don't store frame type in skb->cbVladimir Oltean1-7/+3
Due to a confusion I thought that eth_type_trans() was called by the network stack whereas it can actually be called by network drivers to figure out the skb protocol and next packet_type handlers. In light of the above, it is not safe to store the frame type from the DSA tagger's .filter callback (first entry point on RX path), since GRO is yet to be invoked on the received traffic. Hence it is very likely that the skb->cb will actually get overwritten between eth_type_trans() and the actual DSA packet_type handler. Of course, what this patch fixes is the actual overwriting of the SJA1105_SKB_CB(skb)->type field from the GRO layer, which made all frames be seen as SJA1105_FRAME_TYPE_NORMAL (0). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31Merge tag 'spdx-5.2-rc3-1' of ↵Linus Torvalds418-2343/+425
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. There is also a patch in here to add the proper SPDX header to a bunch of Kbuild files that we have missed in the past due to new files being added and forgetting that Kbuild uses two different file names for Makefiles. This issue was reported by the Kbuild maintainer. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits) treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-27 22:35:30 +0000