summaryrefslogtreecommitdiffstats
path: root/net/sunrpc
AgeCommit message (Collapse)AuthorFilesLines
2018-06-04Merge branch 'work.misc' of ↵Linus Torvalds1-16/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Misc bits and pieces not fitting into anything more specific" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: delete unnecessary assignment in vfs_listxattr Documentation: filesystems: update filesystem locking documentation vfs: namei: use path_equal() in follow_dotdot() fs.h: fix outdated comment about file flags __inode_security_revalidate() never gets NULL opt_dentry make xattr_getsecurity() static vfat: simplify checks in vfat_lookup() get rid of dead code in d_find_alias() it's SB_BORN, not MS_BORN... msdos_rmdir(): kill BS comment remove rpc_rmdir() fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
2018-06-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-1/+1
Pull rdma fixes from Jason Gunthorpe: "Just three small last minute regressions that were found in the last week. The Broadcom fix is a bit big for rc7, but since it is fixing driver crash regressions that were merged via netdev into rc1, I am sending it. - bnxt netdev changes merged this cycle caused the bnxt RDMA driver to crash under certain situations - Arnd found (several, unfortunately) kconfig problems with the patches adding INFINIBAND_ADDR_TRANS. Reverting this last part, will fix it more fully outside -rc. - Subtle change in error code for a uapi function caused breakage in userspace. This was bug was subtly introduced cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix error code for invalid GID entry IB: Revert "remove redundant INFINIBAND kconfig dependencies" RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes
2018-05-28IB: Revert "remove redundant INFINIBAND kconfig dependencies"Arnd Bergmann1-1/+1
Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a link error when another driver using it is built-in. The INFINIBAND_ADDR_TRANS dependency is insufficient here as this is a 'bool' symbol that does not force anything to be a module in turn. fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work': smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_request': trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_destroy_trans': trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp' trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd' Fixes: 9533b292a7ac ("IB: remove redundant INFINIBAND kconfig dependencies") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Thelen <gthelen@google.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-1/+1
Pull rdma fixes from Jason Gunthorpe: "This is pretty much just the usual array of smallish driver bugs. - remove bouncing addresses from the MAINTAINERS file - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers - various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers - two fixes for patches already sent during the merge window - a long-standing bug related to not decreasing the pinned pages count in the right MM was found and fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits) RDMA/hns: Move the location for initializing tmp_len RDMA/hns: Bugfix for cq record db for kernel IB/uverbs: Fix uverbs_attr_get_obj RDMA/qedr: Fix doorbell bar mapping for dpi > 1 IB/umem: Use the correct mm during ib_umem_release iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint RDMA/i40iw: Avoid reference leaks when processing the AEQ RDMA/i40iw: Avoid panic when objects are being created and destroyed RDMA/hns: Fix the bug with NULL pointer RDMA/hns: Set NULL for __internal_mr RDMA/hns: Enable inner_pa_vld filed of mpt RDMA/hns: Set desc_dma_addr for zero when free cmq desc RDMA/hns: Fix the bug with rq sge RDMA/hns: Not support qp transition from reset to reset for hip06 RDMA/hns: Add return operation when configured global param fail RDMA/hns: Update convert function of endian format RDMA/hns: Load the RoCE dirver automatically RDMA/hns: Bugfix for rq record db for kernel RDMA/hns: Add rq inline flags judgement ...
2018-05-11Merge tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds4-11/+10
Pull NFS client fixes from Anna Schumaker: "These patches fix both a possible corruption during NFSoRDMA MR recovery, and a sunrpc tracepoint crash. Additionally, Trond has a new email address to put in the MAINTAINERS file" * tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: Change Trond's email address in MAINTAINERS sunrpc: Fix latency trace point crashes xprtrdma: Fix list corruption / DMAR errors during MR recovery
2018-05-09IB: remove redundant INFINIBAND kconfig dependenciesGreg Thelen1-1/+1
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-01xprtrdma: Fix list corruption / DMAR errors during MR recoveryChuck Lever4-11/+10
The ro_release_mr methods check whether mr->mr_list is empty. Therefore, be sure to always use list_del_init when removing an MR linked into a list using that field. Otherwise, when recovering from transport failures or device removal, list corruption can result, or MRs can get mapped or unmapped an odd number of times, resulting in IOMMU-related failures. In general this fix is appropriate back to v4.8. However, code changes since then make it impossible to apply this patch directly to stable kernels. The fix would have to be applied by hand or reworked for kernels earlier than v4.16. Backport guidance -- there are several cases: - When creating an MR, initialize mr_list so that using list_empty on an as-yet-unused MR is safe. - When an MR is being handled by the remote invalidation path, ensure that mr_list is reinitialized when it is removed from rl_registered. - When an MR is being handled by rpcrdma_destroy_mrs, it is removed from mr_all, but it may still be on an rl_registered list. In that case, the MR needs to be removed from that list before being released. - Other cases are covered by using list_del_init in rpcrdma_mr_pop. Fixes: 9d6b04097882 ('xprtrdma: Place registered MWs on a ... ') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-16remove rpc_rmdir()Al Viro1-16/+0
no users since 2014... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15rpc_pipefs: fix double-dput()Al Viro1-0/+1
if we ever hit rpc_gssd_dummy_depopulate() dentry passed to it has refcount equal to 1. __rpc_rmpipe() drops it and dput() done after that hits an already freed dentry. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-12Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds14-116/+240
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Fix corner cases when handling device removal # v4.12+ - xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+ Features: - New sunrpc tracepoint for RPC pings - Finer grained NFSv4 attribute checking - Don't unnecessarily return NFS v4 delegations Other bugfixes and cleanups: - Several other small NFSoRDMA cleanups - Improvements to the sunrpc RTT measurements - A few sunrpc tracepoint cleanups - Various fixes for NFS v4 lock notifications - Various sunrpc and NFS v4 XDR encoding cleanups - Switch to the ida_simple API - Fix NFSv4.1 exclusive create - Forget acl cache after setattr operation - Don't advance the nfs_entry readdir cookie if xdr decoding fails" * tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits) NFS: advance nfs_entry cookie only after decoding completes successfully NFSv3/acl: forget acl cache after setattr NFSv4.1: Fix exclusive create NFSv4: Declare the size up to date after it was set. nfs: Use ida_simple API NFSv4: Fix the nfs_inode_set_delegation() arguments NFSv4: Clean up CB_GETATTR encoding NFSv4: Don't ask for attributes when ACCESS is protected by a delegation NFSv4: Add a helper to encode/decode struct timespec NFSv4: Clean up encode_attrs NFSv4; Clean up XDR encoding of type bitmap4 NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group SUNRPC: Add a helper for encoding opaque data inline SUNRPC: Add helpers for decoding opaque and string types NFSv4: Ignore change attribute invalidations if we hold a delegation NFS: More fine grained attribute tracking NFS: Don't force unnecessary cache invalidation in nfs_update_inode() NFS: Don't redirty the attribute cache in nfs_wcc_update_inode() NFS: Don't force a revalidation of all attributes if change is missing NFS: Convert NFS_INO_INVALID flags to unsigned long ...
2018-04-10SUNRPC: Add helpers for decoding opaque and string typesTrond Myklebust1-0/+82
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Fix corner cases when handling device removalChuck Lever1-4/+9
Michal Kalderon has found some corner cases around device unload with active NFS mounts that I didn't have the imagination to test when xprtrdma device removal was added last year. - The ULP device removal handler is responsible for deallocating the PD. That wasn't clear to me initially, and my own testing suggested it was not necessary, but that is incorrect. - The transport destruction path can no longer assume that there is a valid ID. - When destroying a transport, ensure that ib_free_cq() is not invoked on a CQ that was already released. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA from ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10sunrpc: Add static trace point to report result of RPC pingChuck Lever1-0/+6
This information can help track down local misconfiguration issues as well as network partitions and unresponsive servers. There are several ways to send a ping, and with transport multi- plexing, the exact rpc_xprt that is used is sometimes not known by the upper layer. The rpc_xprt pointer passed to the trace point call also has to be RCU-safe. I found a spot inside the client FSM where an rpc_xprt pointer is always available and safe to use. Suggested-by: Bill Baker <Bill.Baker@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10sunrpc: Add static trace point to report RPC latency statsChuck Lever1-5/+11
Introduce a low-overhead mechanism to report information about latencies of individual RPCs. The goal is to enable user space to filter the trace record for latency outliers, or build histograms, etc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10sunrpc: Simplify synopsis of some trace pointsChuck Lever2-6/+6
Clean up: struct rpc_task carries a pointer to a struct rpc_clnt, and in fact task->tk_client is always what is passed into trace points that are already passing @task. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Make num_reqs a non-atomic integerChuck Lever1-8/+9
If recording xprt->stat.max_slots is moved into xprt_alloc_slot, then xprt->num_reqs is never manipulated outside xprt->reserve_lock. There's no longer a need for xprt->num_reqs to be atomic. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Make RTT measurement more precise (Send)Chuck Lever3-1/+4
Some RPC transports have more overhead in their send_request callouts than others. For example, for RPC-over-RDMA: - Marshaling an RPC often has to DMA map the RPC arguments - Registration methods perform memory registration as part of marshaling To capture just server and network latencies more precisely: when sending a Call, capture the rq_xtime timestamp _after_ the transport header has been marshaled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Make RTT measurement more precise (Receive)Chuck Lever1-2/+3
Some RPC transports have more overhead in their reply handlers than others. For example, for RPC-over-RDMA: - RPC completion has to wait for memory invalidation, which is not a part of the server/network round trip - Recently a context switch was introduced into the reply handler, which further artificially inflates the measure of RPC RTT To capture just server and network latencies more precisely: when receiving a reply, compute the RTT as soon as the XID is recognized rather than at RPC completion time. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10SUNRPC: Move xprt_update_rtt callsiteChuck Lever2-3/+9
Since commit 33849792cbcd ("xprtrdma: Detect unreachable NFS/RDMA servers more reliably"), the xprtrdma transport now has a ->timer callout. But xprtrdma does not need to compute RTT data, only UDP needs that. Move the xprt_update_rtt call into the UDP transport implementation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Move creation of rl_rdmabuf to rpcrdma_create_reqChuck Lever3-34/+12
Refactor: Both rpcrdma_create_req call sites have to allocate the buffer where the transport header is built, so just move that allocation into rpcrdma_create_req. This buffer is a fixed size. There's no needed information available in call_allocate that is not also available when the transport is created. The original purpose for allocating these buffers on demand was to reduce the possibility that an allocation failure during transport creation will hork the mount operation during low memory scenarios. Some relief for this rare possibility is coming up in the next few patches. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Chain Send to FastReg WRsChuck Lever4-18/+49
With FRWR, the client transport can perform memory registration and post a Send with just a single ib_post_send. This reduces contention between the send_request path and the Send Completion handlers, and reduces the overhead of registering a chunk that has multiple segments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: "Support" call-only RPCsChuck Lever2-6/+6
RPC-over-RDMA version 1 credit accounting relies on there being a response message for every RPC Call. This means that RPC procedures that have no reply will disrupt credit accounting, just in the same way as a retransmit would (since it is sent because no reply has arrived). Deal with the "no reply" case the same way. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Reduce number of MRs created by rpcrdma_mrs_createChuck Lever1-1/+1
Create fewer MRs on average. Many workloads don't need as many as 32 MRs, and the transport can now quickly restock the MR free list. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: ->send_request returns -EAGAIN when there are no free MRsChuck Lever5-13/+27
Currently, when the MR free list is exhausted during marshaling, the RPC/RDMA transport places the RPC task on the delayq, which forces a wait for HZ >> 2 before the marshal and send is retried. With this change, the transport now places such an RPC task on the pending queue, and wakes it just as soon as more MRs have been created. Creating more MRs typically takes less than a millisecond, and this waking mechanism is less deadlock-prone. Moreover, the waiting RPC task is holding the transport's write lock, which blocks the transport from sending RPCs. Therefore faster recovery from MR exhaustion is desirable. This is the same mechanism that the TCP transport utilizes when handling write buffer space exhaustion. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Remove xprt-specific connect cookieChuck Lever3-6/+3
Clean up: The generic rq_connect_cookie is sufficient to detect RPC Call retransmission. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Remove arbitrary limit on initiator depthChuck Lever1-5/+2
Clean up: We need to check only that the value does not exceed the range of the u8 field it's going into. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-10xprtrdma: Fix latency regression on NUMA NFS/RDMA clientsChuck Lever3-4/+1
With v4.15, on one of my NFS/RDMA clients I measured a nearly doubling in the latency of small read and write system calls. There was no change in server round trip time. The extra latency appears in the whole RPC execution path. "git bisect" settled on commit ccede7598588 ("xprtrdma: Spread reply processing over more CPUs") . After some experimentation, I found that leaving the WQ bound and allowing the scheduler to pick the dispatch CPU seems to eliminate the long latencies, and it does not introduce any new regressions. The fix is implemented by reverting only the part of commit ccede7598588 ("xprtrdma: Spread reply processing over more CPUs") that dispatches RPC replies specifically on the CPU where the matching RPC call was made. Interestingly, saving the CPU number and later queuing reply processing there was effective _only_ for a NFS READ and WRITE request. On my NUMA client, in-kernel RPC reply processing for asynchronous RPCs was dispatched on the same CPU where the RPC call was made, as expected. However synchronous RPCs seem to get their reply dispatched on some other CPU than where the call was placed, every time. Fixes: ccede7598588 ("xprtrdma: Spread reply processing over ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-04-05Merge tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linuxLinus Torvalds10-90/+189
Pull nfsd updates from Bruce Fields: "Chuck Lever did a bunch of work on nfsd tracepoints, on RDMA, and on server xdr decoding (with an eye towards eliminating a data copy in the RDMA case). I did some refactoring of the delegation code in preparation for eliminating some delegation self-conflicts and implementing write delegations" * tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linux: (40 commits) nfsd: fix incorrect umasks sunrpc: remove incorrect HMAC request initialization NFSD: Clean up legacy NFS SYMLINK argument XDR decoders NFSD: Clean up legacy NFS WRITE argument XDR decoders nfsd: Trace NFSv4 COMPOUND execution nfsd: Add I/O trace points in the NFSv4 read proc nfsd: Add I/O trace points in the NFSv4 write path nfsd: Add "nfsd_" to trace point names nfsd: Record request byte count, not count of vectors nfsd: Fix NFSD trace points svc: Report xprt dequeue latency sunrpc: Report per-RPC execution stats sunrpc: Re-purpose trace_svc_process sunrpc: Save remote presentation address in svc_xprt for trace events sunrpc: Simplify trace_svc_recv sunrpc: Simplify do_enqueue tracing sunrpc: Move trace_svc_xprt_dequeue() sunrpc: Update show_svc_xprt_flags() to include recently added flags svc: Simplify ->xpo_secure_port sunrpc: Remove unneeded pointer dereference ...
2018-04-03sunrpc: remove incorrect HMAC request initializationEric Biggers1-3/+0
make_checksum_hmac_md5() is allocating an HMAC transform and doing crypto API calls in the following order: crypto_ahash_init() crypto_ahash_setkey() crypto_ahash_digest() This is wrong because it makes no sense to init() the request before a key has been set, given that the initial state depends on the key. And digest() is short for init() + update() + final(), so in this case there's no need to explicitly call init() at all. Before commit 9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key") the extra init() had no real effect, at least for the software HMAC implementation. (There are also hardware drivers that implement HMAC-MD5, and it's not immediately obvious how gracefully they handle init() before setkey().) But now the crypto API detects this incorrect initialization and returns -ENOKEY. This is breaking NFS mounts in some cases. Fix it by removing the incorrect call to crypto_ahash_init(). Reported-by: Michael Young <m.a.young@durham.ac.uk> Fixes: 9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key") Fixes: fffdaef2eb4a ("gss_krb5: Add support for rc4-hmac encryption") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03NFSD: Clean up legacy NFS SYMLINK argument XDR decodersChuck Lever1-0/+67
Move common code in NFSD's legacy SYMLINK decoders into a helper. The immediate benefits include: - one fewer data copies on transports that support DDP - consistent error checking across all versions - reduction of code duplication - support for both legal forms of SYMLINK requests on RDMA transports for all versions of NFS (in particular, NFSv2, for completeness) In the long term, this helper is an appropriate spot to perform a per-transport call-out to fill the pathname argument using, say, RDMA Reads. Filling the pathname in the proc function also means that eventually the incoming filehandle can be interpreted so that filesystem- specific memory can be allocated as a sink for the pathname argument, rather than using anonymous pages. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03NFSD: Clean up legacy NFS WRITE argument XDR decodersChuck Lever1-0/+42
Move common code in NFSD's legacy NFS WRITE decoders into a helper. The immediate benefit is reduction of code duplication and some nice micro-optimizations (see below). In the long term, this helper can perform a per-transport call-out to fill the rq_vec (say, using RDMA Reads). The legacy WRITE decoders and procs are changed to work like NFSv4, which constructs the rq_vec just before it is about to call vfs_writev. Why? Calling a transport call-out from the proc instead of the XDR decoder means that the incoming FH can be resolved to a particular filesystem and file. This would allow pages from the backing file to be presented to the transport to be filled, rather than presenting anonymous pages and copying or flipping them into the file's page cache later. I also prefer using the pages in rq_arg.pages, instead of pulling the data pages directly out of the rqstp::rq_pages array. This is currently the way the NFSv3 write decoder works, but the other two do not seem to take this approach. Fixing this removes the only reference to rq_pages found in NFSD, eliminating an NFSD assumption about how transports use the pages in rq_pages. Lastly, avoid setting up the first element of rq_vec as a zero- length buffer. This happens with an RDMA transport when a normal Read chunk is present because the data payload is in rq_arg's page list (none of it is in the head buffer). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03svc: Report xprt dequeue latencyChuck Lever1-2/+2
Record the time between when a rqstp is enqueued on a transport and when it is dequeued. This includes how long the rqstp waits on the queue and how long it takes the kernel scheduler to wake a nfsd thread to service it. The svc_xprt_dequeue trace point is altered to include the number of microseconds between xprt_enqueue and xprt_dequeue. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Report per-RPC execution statsChuck Lever1-1/+2
Introduce a mechanism to report the server-side execution latency of each RPC. The goal is to enable user space to filter the trace record for latency outliers, build histograms, etc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Re-purpose trace_svc_processChuck Lever1-6/+3
Currently, trace_svc_process has two call sites: 1. Just after a call to svc_send. svc_send already invokes trace_svc_send with the same arguments just before returning 2. Just before a call to svc_drop. svc_drop already invokes trace_svc_drop with the same arguments just after it is called Therefore trace_svc_process does not provide any additional information not already provided by these other trace points. However, it would be useful to record the incoming RPC procedure. So reuse trace_svc_process for this purpose. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Save remote presentation address in svc_xprt for trace eventsChuck Lever3-2/+6
TP_printk defines a format string that is passed to user space for converting raw trace event records to something human-readable. My user space's printf (Oracle Linux 7), however, does not have a %pI format specifier. The result is that what is supposed to be an IP address in the output of "trace-cmd report" is just a string that says the field couldn't be displayed. To fix this, adopt the same approach as the client: maintain a pre- formated presentation address for occasions when %pI is not available. The location of the trace_svc_send trace point is adjusted so that rqst->rq_xprt is not NULL when the trace event is recorded. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Simplify trace_svc_recvChuck Lever1-1/+0
There doesn't seem to be a lot of value in calling trace_svc_recv in the failing case. 1. There are two very common cases: one is the transport is not ready, and the other is shutdown. Neither is terribly interesting. 2. The trace record for the failing case contains nothing but the status code. Therefore the trace point call site in the error exit is removed. Since the trace point is now recording a length instead of a status, rename the status field and remove the case that records a zero XID. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Simplify do_enqueue tracingChuck Lever1-8/+3
There are three cases where svc_xprt_do_enqueue() returns without waking an nfsd thread: 1. There is no work to do 2. The transport is already busy 3. There are no available nfsd threads Only 3. is truly interesting. Move the trace point so it records that there was work to do and either an nfsd thread was awoken, or a free one could not found. As an additional clean up, remove a redundant comment and a couple of dprintk call sites. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Move trace_svc_xprt_dequeue()Chuck Lever1-4/+1
Reduce the amount of noise generated by trace_svc_xprt_dequeue by moving it to the end of svc_get_next_xprt. This generates exactly one trace event when a ready xprt is found, rather than spurious events when there is no work to do. The empty events contain no information that can't be obtained simply by tracing function calls to svc_xprt_dequeue. A small additional benefit is simplification of the svc_xprt_event trace class, which no longer has to handle the case when the @xprt parameter is NULL. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03svc: Simplify ->xpo_secure_portChuck Lever3-9/+9
Clean up: Instead of returning a value that is used to set or clear a bit, just make ->xpo_secure_port mangle that bit, and return void. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03sunrpc: Remove unneeded pointer dereferenceChuck Lever1-2/+2
Clean up: Noticed during code inspection that there is already a local automatic variable "xprt" so dereferencing rqst->rq_xprt again is unnecessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai2-2/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Convert sunrpc_net_opsKirill Tkhai1-0/+1
These pernet_operations look similar to rpcsec_gss_net_ops, they just create and destroy another caches. So, they also can be async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Convert rpcsec_gss_net_opsKirill Tkhai1-0/+1
These pernet_operations initialize and destroy sunrpc_net_id refered per-net items. Only used global list is cache_list, and accesses already serialized. sunrpc_destroy_cache_detail() check for list_empty() without cache_list_lock, but when it's called from unregister_pernet_subsys(), there can't be callers in parallel, so we won't miss list_empty() in this case. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Use octal not symbolic permissionsJoe Perches4-30/+30
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20svcrdma: Clean up rdma_build_arg_xdrChuck Lever1-17/+16
Clean up: The value of the byte_count parameter is already passed to rdma_build_arg_xdr as part of the svc_rdma_op_ctxt structure. Further, without the parameter called "byte_count" there is no need to have the abbreviated "bc" automatic variable. "bc" can now be called something more intuitive. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-20svcrdma: Consult max_qp_init_rd_atom when accepting connectionsChuck Lever2-15/+11
The target needs to return the lesser of the client's Inbound RDMA Read Queue Depth (IRD), provided in the connection parameters, and the local device's Outbound RDMA Read Queue Depth (ORD). The latter limit is max_qp_init_rd_atom, not max_qp_rd_atom. The svcrdma_ord value caps the ORD value for iWARP transports, which do not exchange ORD/IRD values at connection time. Since no other Linux kernel RDMA-enabled storage target sees fit to provide this cap, I'm removing it here too. initiator_depth is a u8, so ensure the computed ORD value does not overflow that field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-20svcrdma: Use pr_err to report Receive errorsChuck Lever1-3/+3
Clean up: Other completion handlers use pr_err, not pr_warn. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19SUNRPC: cache: ignore timestamp written to 'flush' file.NeilBrown1-16/+16
The interface for flushing the sunrpc auth cache was poorly designed and has caused problems a number of times. The design is that you write a timestamp, and all entries created before that time are discarded. The most obvious problem is that this is not what people actually want. They want to just flush the whole cache. The 1-second granularity can be a problem, as can the use of wall-clock time. A current problem is that code will write the current time to this file - expecting it to clear everything - and if the seconds number ticks over before this timestamp is checked, the test "then >= now" fails, and a full flush isn't forced. So lets just drop the subtleties and always flush the whole cache. The worst this could do is impose an extra cost refilling it, but that would require someone to be using non-standard tools. We still report an error if the string written is not a number, but we cause any valid number to flush the whole cache. Reported-by: "Wang, Alan 1. (NSB - CN/Hangzhou)" <alan.1.wang@nokia-sbell.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-19sunrpc: Fix unaligned access on sparc64James Ettle2-2/+7
Fix unaligned access in gss_{get,verify}_mic_v2() on sparc64 Signed-off-by: James Ettle <james@ettle.org.uk> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-02-12net: make getname() functions return length rather than use int* parameterDenys Vlasenko3-10/+12
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 22:25:14 +0000