summaryrefslogtreecommitdiffstats
path: root/net/sched/cls_u32.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-08net: cls_u32: be more strict about skip-sw flag for knodesJakub Kicinski1-18/+19
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). This patch fixes the knode handling. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: cls_u32: catch all hardware offload errorsJakub Kicinski1-1/+7
Errors reported by u32_replace_hw_hnode() were not propagated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: sched: fix tc_should_offload for specific clsact classesDaniel Borkmann1-4/+4
When offloading classifiers such as u32 or flower to hardware, and the qdisc is clsact (TC_H_CLSACT), then we need to differentiate its classes, since not all of them handle ingress, therefore we must leave those in software path. Add a .tcf_cl_offload() callback, so we can generically handle them, tested on ixgbe. Fixes: 10cbc6843446 ("net/sched: cls_flower: Hardware offloaded filters statistics support") Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Fixes: a1b7c5fd7fe9 ("net: sched: add cls_u32 offload hooks for netdevs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: cls_u32: be more strict about skip-sw flagJakub Kicinski1-10/+11
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: cls_u32: fix error code for invalid flagsJakub Kicinski1-1/+1
'err' variable is not set in this test, we would return whatever previous test set 'err' to. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16net: cls_u32: Add support for skip-sw flag to tc u32 classifier.Samudrala, Sridhar1-9/+36
On devices that support TC U32 offloads, this flag enables a filter to be added only to HW. skip-sw and skip-hw are mutually exclusive flags. By default without any flags, the filter is added to both HW and SW, but no error checks are done in case of failure to add to HW. With skip-sw, failure to add to HW is treated as an error. Here is a sample script that adds 2 filters, one with skip-sw and the other with skip-hw flag. # add ingress qdisc tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # add u32 filter with skip-sw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: flowid 800:1 \ skip-sw \ match ip src 192.168.1.0/24 \ action drop # add u32 filter with skip-hw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: flowid 800:2 \ skip-hw \ match ip src 192.168.2.0/24 \ action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26sched: align nlattr properly when neededNicolas Dichtel1-3/+4
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: sched: cls_u32 add bit to specify software only rulesJohn Fastabend1-10/+27
In the initial implementation the only way to stop a rule from being inserted into the hardware table was via the device feature flag. However this doesn't work well when working on an end host system where packets are expect to hit both the hardware and software datapaths. For example we can imagine a rule that will match an IP address and increment a field. If we install this rule in both hardware and software we may increment the field twice. To date we have only added support for the drop action so we have been able to ignore these cases. But as we extend the action support we will hit this example plus more such cases. Arguably these are not even corner cases in many working systems these cases will be common. To avoid forcing the driver to always abort (i.e. the above example) this patch adds a flag to add a rule in software only. A careful user can use this flag to build software and hardware datapaths that work together. One example we have found particularly useful is to use hardware resources to set the skb->mark on the skb when the match may be expensive to run in software but a mark lookup in a hash table is cheap. The idea here is hardware can do in one lookup what the u32 classifier may need to traverse multiple lists and hash tables to compute. The flag is only passed down on inserts. On deletion to avoid stale references in hardware we always try to remove a rule if it exists. The flags field is part of the classifier specific options. Although it is tempting to lift this into the generic structure doing this proves difficult do to how the tc netlink attributes are implemented along with how the dump/change routines are called. There is also precedence for putting seemingly generic pieces in the specific classifier options such as TCA_U32_POLICE, TCA_U32_ACT, etc. So although not ideal I've left FLAGS in the u32 options as well as it simplifies the code greatly and user space has already learned how to manage these bits ala 'tc' tool. Another thing if trying to update a rule we require the flags to be unchanged. This is to force user space, software u32 and the hardware u32 to keep in sync. Thanks to Simon Horman for catching this case. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: sched: consolidate offload decision in cls_u32John Fastabend1-4/+4
The offload decision was originally very basic and tied to if the dev implemented the appropriate ndo op hook. The next step is to allow the user to more flexibly define if any paticular rule should be offloaded or not. In order to have this logic in one function lift the current check into a helper routine tc_should_offload(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: sched: add cls_u32 offload hooks for netdevsJohn Fastabend1-2/+97
This patch allows netdev drivers to consume cls_u32 offloads via the ndo_setup_tc ndo op. This works aligns with how network drivers have been doing qdisc offloads for mqprio. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25cls_u32: complete the check for non-forced case in u32_destroy()WANG Cong1-0/+13
In commit 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Reported-by: Akshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+4
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09net_sched: fix struct tc_u_hnode layout in u32WANG Cong1-1/+4
We dynamically allocate divisor+1 entries for ->ht[] in tc_u_hnode: ht = kzalloc(sizeof(*ht) + divisor*sizeof(void *), GFP_KERNEL); So ->ht is supposed to be the last field of this struct, however this is broken, since an rcu head is appended after it. Fixes: 1ce87720d456 ("net: sched: make cls_u32 lockless") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09net_sched: destroy proto tp when all filters are goneCong Wang1-1/+24
Kernel automatically creates a tp for each (kind, protocol, priority) tuple, which has handle 0, when we add a new filter, but it still is left there after we remove our own, unless we don't specify the handle (literally means all the filters under the tuple). For example this one is left: # tc filter show dev eth0 filter parent 8001: protocol arp pref 49152 basic The user-space is hard to clean up these for kernel because filters like u32 are organized in a complex way. So kernel is responsible to remove it after all filters are gone. Each type of filter has its own way to store the filters, so each type has to provide its way to check if all filters are gone. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: sched: cls: remove unused op put from tcf_proto_opsJiri Pirko1-5/+0
It is never called and implementations are void. So just remove it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net_sched: avoid calling tcf_unbind_filter() in call_rcu callbackWANG Cong1-4/+6
This fixes the following crash: [ 63.976822] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 63.980094] CPU: 1 PID: 15 Comm: ksoftirqd/1 Not tainted 3.17.0-rc6+ #648 [ 63.980094] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 63.980094] task: ffff880117dea690 ti: ffff880117dfc000 task.ti: ffff880117dfc000 [ 63.980094] RIP: 0010:[<ffffffff817e6d07>] [<ffffffff817e6d07>] u32_destroy_key+0x27/0x6d [ 63.980094] RSP: 0018:ffff880117dffcc0 EFLAGS: 00010202 [ 63.980094] RAX: ffff880117dea690 RBX: ffff8800d02e0820 RCX: 0000000000000000 [ 63.980094] RDX: 0000000000000001 RSI: 0000000000000002 RDI: 6b6b6b6b6b6b6b6b [ 63.980094] RBP: ffff880117dffcd0 R08: 0000000000000000 R09: 0000000000000000 [ 63.980094] R10: 00006c0900006ba8 R11: 00006ba100006b9d R12: 0000000000000001 [ 63.980094] R13: ffff8800d02e0898 R14: ffffffff817e6d4d R15: ffff880117387a30 [ 63.980094] FS: 0000000000000000(0000) GS:ffff88011a800000(0000) knlGS:0000000000000000 [ 63.980094] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 63.980094] CR2: 00007f07e6732fed CR3: 000000011665b000 CR4: 00000000000006e0 [ 63.980094] Stack: [ 63.980094] ffff88011a9cd300 ffffffff82051ac0 ffff880117dffce0 ffffffff817e6d68 [ 63.980094] ffff880117dffd70 ffffffff810cb4c7 ffffffff810cb3cd ffff880117dfffd8 [ 63.980094] ffff880117dea690 ffff880117dea690 ffff880117dfffd8 000000000000000a [ 63.980094] Call Trace: [ 63.980094] [<ffffffff817e6d68>] u32_delete_key_freepf_rcu+0x1b/0x1d [ 63.980094] [<ffffffff810cb4c7>] rcu_process_callbacks+0x3bb/0x691 [ 63.980094] [<ffffffff810cb3cd>] ? rcu_process_callbacks+0x2c1/0x691 [ 63.980094] [<ffffffff817e6d4d>] ? u32_destroy_key+0x6d/0x6d [ 63.980094] [<ffffffff810780a4>] __do_softirq+0x142/0x323 [ 63.980094] [<ffffffff810782a8>] run_ksoftirqd+0x23/0x53 [ 63.980094] [<ffffffff81092126>] smpboot_thread_fn+0x203/0x221 [ 63.980094] [<ffffffff81091f23>] ? smpboot_unpark_thread+0x33/0x33 [ 63.980094] [<ffffffff8108e44d>] kthread+0xc9/0xd1 [ 63.980094] [<ffffffff819e00ea>] ? do_wait_for_common+0xf8/0x125 [ 63.980094] [<ffffffff8108e384>] ? __kthread_parkme+0x61/0x61 [ 63.980094] [<ffffffff819e43ec>] ret_from_fork+0x7c/0xb0 [ 63.980094] [<ffffffff8108e384>] ? __kthread_parkme+0x61/0x61 tp could be freed in call_rcu callback too, the order is not guaranteed. John Fastabend says: ==================== Its worth noting why this is safe. Any running schedulers will either read the valid class field or it will be zeroed. All schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. ==================== Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net_sched: remove the first parameter from tcf_exts_destroy()WANG Cong1-2/+2
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <hadi@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: sched: fix compile warning in cls_u32Eric Dumazet1-1/+1
$ grep CONFIG_CLS_U32_MARK .config # CONFIG_CLS_U32_MARK is not set net/sched/cls_u32.c: In function 'u32_change': net/sched/cls_u32.c:852:1: warning: label 'errout' defined but not used [-Wunused-label] Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: sched: cls_u32 changes to knode must appear atomic to readersJohn Fastabend1-9/+126
Changes to the cls_u32 classifier must appear atomic to the readers. Before this patch if a change is requested for both the exts and ifindex, first the ifindex is updated then the exts with tcf_exts_change(). This opens a small window where a reader can have a exts chain with an incorrect ifindex. This violates the the RCU semantics. Here we resolve this by always passing u32_set_parms() a copy of the tc_u_knode to work on and then inserting it into the hash table after the updates have been successfully applied. Tested with the following short script: #tc filter add dev p3p2 parent 8001:0 protocol ip prio 99 handle 1: \ u32 divisor 256 #tc filter add dev p3p2 parent 8001:0 protocol ip prio 99 \ u32 link 1: hashkey mask ffffff00 at 12 \ match ip src 192.168.8.0/2 #tc filter add dev p3p2 parent 8001:0 protocol ip prio 102 \ handle 1::10 u32 classid 1:2 ht 1: \ match ip src 192.168.8.0/8 match ip tos 0x0a 1e #tc filter change dev p3p2 parent 8001:0 protocol ip prio 102 \ handle 1::10 u32 classid 1:2 ht 1: \ match ip src 1.1.0.0/8 match ip tos 0x0b 1e CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: cls_u32: fix missed pcpu_success free_percpuJohn Fastabend1-0/+13
This fixes a missed free_percpu in the unwind code path and when keys are destroyed. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: sched: cls_u32: rcu can not be last nodeJohn Fastabend1-1/+4
tc_u32_sel 'sel' in tc_u_knode expects to be the last element in the structure and pads the structure with tc_u32_key fields for each key. kzalloc(sizeof(*n) + s->nkeys*sizeof(struct tc_u32_key), GFP_KERNEL) CC: Eric Dumazet <edumazet@google.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16net: sched: cls_u32 add missing rcu_assign_pointer and annotationJohn Fastabend1-3/+4
Add missing rcu_assign_pointer and missing annotation for ht_up in cls_u32.c Caught by kbuild bot, >> net/sched/cls_u32.c:378:36: sparse: incorrect type in initializer (different address spaces) net/sched/cls_u32.c:378:36: expected struct tc_u_hnode *ht net/sched/cls_u32.c:378:36: got struct tc_u_hnode [noderef] <asn:4>*ht_up >> net/sched/cls_u32.c:610:54: sparse: incorrect type in argument 4 (different address spaces) net/sched/cls_u32.c:610:54: expected struct tc_u_hnode *ht net/sched/cls_u32.c:610:54: got struct tc_u_hnode [noderef] <asn:4>*ht_up >> net/sched/cls_u32.c:684:18: sparse: incorrect type in assignment (different address spaces) net/sched/cls_u32.c:684:18: expected struct tc_u_hnode [noderef] <asn:4>*ht_up net/sched/cls_u32.c:684:18: got struct tc_u_hnode *[assigned] ht >> net/sched/cls_u32.c:359:18: sparse: dereference of noderef expression Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16net: sched: fix unsued cpu variableJohn Fastabend1-3/+4
kbuild test robot reported an unused variable cpu in cls_u32.c after the patch below. This happens when PERF and MARK config variables are disabled Fix this is to use separate variables for perf and mark and define the cpu variable inside the ifdef logic. Fixes: 459d5f626da7 ("net: sched: make cls_u32 per cpu")' Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: sched: make cls_u32 locklessJohn Fastabend1-73/+110
Make cls_u32 classifier safe to run without holding lock. This patch converts statistics that are kept in read section u32_classify into per cpu counters. This patch was tested with a tight u32 filter add/delete loop while generating traffic with pktgen. By running pktgen on vlan devices created on top of a physical device we can hit the qdisc layer correctly. For ingress qdisc's a loopback cable was used. for i in {1..100}; do q=`echo $i%8|bc`; echo -n "u32 tos: iteration $i on queue $q"; tc filter add dev p3p2 parent $p prio $i u32 match ip tos 0x10 0xff \ action skbedit queue_mapping $q; sleep 1; tc filter del dev p3p2 prio $i; echo -n "u32 tos hash table: iteration $i on queue $q"; tc filter add dev p3p2 parent $p protocol ip prio $i handle 628: u32 divisor 1 tc filter add dev p3p2 parent $p protocol ip prio $i u32 \ match ip protocol 17 0xff link 628: offset at 0 mask 0xf00 shift 6 plus 0 tc filter add dev p3p2 parent $p protocol ip prio $i u32 \ ht 628:0 match ip tos 0x10 0xff action skbedit queue_mapping $q sleep 2; tc filter del dev p3p2 prio $i sleep 1; done Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: sched: make cls_u32 per cpuJohn Fastabend1-16/+59
This uses per cpu counters in cls_u32 in preparation to convert over to rcu. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-20net_sched: avoid generating same handle for u32 filtersCong Wang1-5/+14
When kernel generates a handle for a u32 filter, it tries to start from the max in the bucket. So when we have a filter with the max (fff) handle, it will cause kernel always generates the same handle for new filters. This can be shown by the following command: tc qdisc add dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip pref 770 handle 800::fff u32 match ip protocol 1 0xff tc filter add dev eth0 parent ffff: protocol ip pref 770 u32 match ip protocol 1 0xff ... we will get some u32 filters with same handle: # tc filter show dev eth0 parent ffff: filter protocol ip pref 770 u32 filter protocol ip pref 770 u32 fh 800: ht divisor 1 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 handles should be unique. This patch fixes it by looking up a bitmap, so that can guarantee the handle is as unique as possible. For compatibility, we still start from 0x800. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27sched, cls: check if we could overwrite actions when changing a filterCong Wang1-5/+5
When actions are attached to a filter, they are a part of the filter itself, so when changing a filter we should allow to overwrite the actions inside as well. In my specific case, when I tried to _append_ a new action to an existing filter which already has an action, I got EEXIST since kernel refused to overwrite the existing one in kernel. This patch checks if we are changing the filter checking NLM_F_CREATE flag (Sigh, filters don't use NLM_F_REPLACE...) and then passes the boolean down to actions. This fixes the problem above. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net_sched: avoid casting void pointerWANG Cong1-1/+1
tp->root is a void* pointer, no need to cast it. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net_sched: optimize tcf_match_indev()WANG Cong1-7/+12
tcf_match_indev() is called in fast path, it is not wise to search for a netdev by ifindex and then compare by its name, just compare the ifindex. Also, dev->name could be changed by user-space, therefore the match would be always fail, but dev->ifindex could be consistent. BTW, this will also save some bytes from the core struct of u32. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net_sched: add struct net pointer to tcf_proto_ops->dumpWANG Cong1-1/+1
It will be needed by the next patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18net_sched: cls: refactor out struct tcf_ext_mapWANG Cong1-9/+5
These information can be saved in tcf_exts, and this will simplify the code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18net_sched: act: use standard struct list_headWANG Cong1-0/+1
Currently actions are chained by a singly linked list, therefore it is a bit hard to add and remove a specific entry. Convert it to struct list_head so that in the latter patch we can remove an action without finding its head. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net_sched: change "foo* bar" to "foo *bar"Yang Yingliang1-1/+1
"foo* bar" or "foo * bar" should be "foo *bar". Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14pkt_sched: namespace aware act_mirredBenjamin LaHaise1-6/+7
Eric Dumazet pointed out that act_mirred needs to find the current net_ns, and struct net pointer is not provided in the call chain. His original patch made use of current->nsproxy->net_ns to find the network namespace, but this fails to work correctly for userspace code that makes use of netlink sockets in different network namespaces. Instead, pass the "struct net *" down along the call chain to where it is needed. This version removes the ifb changes as Eric has submitted that patch separately, but is otherwise identical to the previous version. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net sched: Pass the skb into change so it can access NETLINK_CBEric W. Biederman1-1/+2
cls_flow.c plays with uids and gids. Unless I misread that code it is possible for classifiers to depend on the specific uid and gid values. Therefore I need to know the user namespace of the netlink socket that is installing the packet classifiers. Pass in the rtnetlink skb so I can access the NETLINK_CB of the passed packet. In particular I want access to sk_user_ns(NETLINK_CB(in_skb).ssk). Pass in not the user namespace but the incomming rtnetlink skb into the the classifier change routines as that is generally the more useful parameter. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches1-2/+1
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01pkt_sched: Stop using NLA_PUT*().David S. Miller1-16/+24
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06net: sched: constify tcf_proto and tc_actionEric Dumazet1-1/+1
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22cls_u32: fix sparse warningsstephen hemminger1-6/+6
The variable _data is used in asm-generic to define sections which causes sparse warnings, so just rename the variable. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19net_sched: cleanupsEric Dumazet1-38/+39
Cleanup net/sched code to current CodingStyle and practices. Reduce inline abuse Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05cls_u32: signedness bugDan Carpenter1-1/+1
skb_headroom() is unsigned so "skb_headroom(skb) + toff" is also unsigned and can't be less than zero. This test was added in 66d50d25: "u32: negative offset fix" It was supposed to fix a regression. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02u32: negative offset fixstephen hemminger1-2/+4
It was possible to use a negative offset in a u32 match to reference the ethernet header or other parts of the link layer header. This fixes the regression caused by: commit fbc2e7d9cf49e0bf89b9e91fd60a06851a855c5d Author: Changli Gao <xiaosuo@gmail.com> Date: Wed Jun 2 07:32:42 2010 -0700 cls_u32: use skb_header_pointer() to dereference data safely Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02cls_u32: use skb_header_pointer() to dereference data safelyChangli Gao1-13/+36
use skb_header_pointer() to dereference data safely the original skb->data dereference isn't safe, as there isn't any skb->len or skb_is_nonlinear() check. skb_header_pointer() is used instead in this patch. And when the skb isn't long enough, we terminate the function u32_classify() immediately with -1. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net sched: printk message severitystephen hemminger1-5/+5
The previous patch encourage me to go look at all the messages in the network scheduler and fix them. Many messages were missing any severity level. Some serious ones that should never happen were turned into WARN(), and the random noise messages that were handled changed to pr_debug(). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24net: remove trailing space in messagesFrans Pop1-2/+2
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05pkt_sched: cls_u32: Fix locking in u32_change()Jarek Poplawski1-1/+2
New nodes are inserted in u32_change() under rtnl_lock() with wmb(), so without tcf_tree_lock() like in other classifiers (e.g. cls_fw). This isn't enough without rmb() on the read side, but on the other hand adding such barriers doesn't give any savings, so the lock is added instead. Reported-by: m0sia <m0sia@plotinka.ru> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20pkt_sched: remove unnecessary xchg() in packet classifiersPatrick McHardy1-5/+6
The use of xchg() hasn't been necessary since 2.2.something when proper locking was added to packet schedulers. In the case of classifiers they mostly weren't even necessary before that since they're mainly used to assign a NULL pointer to the filter root in the ->destroy path; the root is destroyed immediately after that. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25net: convert BUG_TRAP to generic WARN_ONIlpo Järvinen1-5/+5
Removes legacy reinvent-the-wheel type thing. The generic machinery integrates much better to automated debugging aids such as kerneloops.org (and others), and is unambiguous due to better naming. Non-intuively BUG_TRAP() is actually equal to WARN_ON() rather than BUG_ON() though some might actually be promoted to BUG_ON() but I left that to future. I could make at least one BUILD_BUG_ON conversion. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 14:37:26 +0000