summaryrefslogtreecommitdiffstats
path: root/net/rxrpc
AgeCommit message (Collapse)AuthorFilesLines
2018-03-16rxrpc: remove redundant initialization of variable 'len'Colin Ian King1-1/+1
The variable 'len' is being initialized with a value that is never read and it is re-assigned later, hence the initialization is redundant and can be removed. Cleans up clang warning: net/rxrpc/recvmsg.c:275:15: warning: Value stored to 'len' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22rxrpc: Fix send in rxrpc_send_data_packet()David Howells1-1/+1
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send both parts of the iov[] buffer, but one of them does not. Fix it so that it does. Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc header included, but no payload. Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16rxrpc: Work around usercopy checkDavid Howells1-2/+3
Due to a check recently added to copy_to_user(), it's now not permitted to copy from slab-held data to userspace unless the slab is whitelisted. This affects rxrpc_recvmsg() when it attempts to place an RXRPC_USER_CALL_ID control message in the userspace control message buffer. A warning is generated by usercopy_warn() because the source is the copy of the user_call_ID retained in the rxrpc_call struct. Work around the issue by copying the user_call_ID to a variable on the stack and passing that to put_cmsg(). The warning generated looks like: Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'dmaengine-unmap-128' (offset 680, size 8)! WARNING: CPU: 0 PID: 1401 at mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 ... RIP: 0010:usercopy_warn+0x7e/0xa0 ... Call Trace: __check_object_size+0x9c/0x1a0 put_cmsg+0x98/0x120 rxrpc_recvmsg+0x6fc/0x1010 [rxrpc] ? finish_wait+0x80/0x80 ___sys_recvmsg+0xf8/0x240 ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? finish_task_switch+0xa6/0x2b0 ? trace_hardirqs_on_caller+0xed/0x180 ? _raw_spin_unlock_irq+0x29/0x40 ? __sys_recvmsg+0x4e/0x90 __sys_recvmsg+0x4e/0x90 do_syscall_64+0x7a/0x220 entry_SYSCALL_64_after_hwframe+0x26/0x9b Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-08rxrpc: Don't put crypto buffers on the stackDavid Howells2-41/+52
Don't put buffers of data to be handed to crypto on the stack as this may cause an assertion failure in the kernel (see below). Fix this by using an kmalloc'd buffer instead. kernel BUG at ./include/linux/scatterlist.h:147! ... RIP: 0010:rxkad_encrypt_response.isra.6+0x191/0x1b0 [rxrpc] RSP: 0018:ffffbe2fc06cfca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff989277d59900 RCX: 0000000000000028 RDX: 0000259dc06cfd88 RSI: 0000000000000025 RDI: ffffbe30406cfd88 RBP: ffffbe2fc06cfd60 R08: ffffbe2fc06cfd08 R09: ffffbe2fc06cfd08 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff7c5f80d9f95 R13: ffffbe2fc06cfd88 R14: ffff98927a3f7aa0 R15: ffffbe2fc06cfd08 FS: 0000000000000000(0000) GS:ffff98927fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b1ff28f0f8 CR3: 000000001b412003 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxkad_respond_to_challenge+0x297/0x330 [rxrpc] rxrpc_process_connection+0xd1/0x690 [rxrpc] ? process_one_work+0x1c3/0x680 ? __lock_is_held+0x59/0xa0 process_one_work+0x249/0x680 worker_thread+0x3a/0x390 ? process_one_work+0x680/0x680 kthread+0x121/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07rxrpc: Fix received abort handlingDavid Howells2-5/+14
AF_RXRPC is incorrectly sending back to the server any abort it receives for a client connection. This is due to the final-ACK offload to the connection event processor patch. The abort code is copied into the last-call information on the connection channel and then the event processor is set. Instead, the following should be done: (1) In the case of a final-ACK for a successful call, the ACK should be scheduled as before. (2) In the case of a locally generated ABORT, the ABORT details should be cached for sending in response to further packets related to that call and no further action scheduled at call disconnect time. (3) In the case of an ACK received from the peer, the call should be considered dead, no ABORT should be transmitted at this time. In response to further non-ABORT packets from the peer relating to this call, an RX_USER_ABORT ABORT should be transmitted. (4) In the case of a call killed due to network error, an RX_USER_ABORT ABORT should be cached for transmission in response to further packets, but no ABORT should be sent at this time. Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+0
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-16net: delete /proc THIS_MODULE referencesAlexey Dobriyan1-2/+0
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03rxrpc: Use correct netns source in rxrpc_release_sock()David Howells1-2/+3
In rxrpc_release_sock() there may be no rx->local value to access, so we can't unconditionally follow it to the rxrpc network namespace information to poke the connection reapers. Instead, use the socket's namespace pointer to find the namespace. This unfixed code causes the following static checker warning: net/rxrpc/af_rxrpc.c:898 rxrpc_release_sock() error: we previously assumed 'rx->local' could be null (see line 887) Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30Merge tag 'rxrpc-fixes-20171129' of ↵David S. Miller5-27/+35
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fixes Here are three patches for AF_RXRPC. One removes some whitespace, one fixes terminal ACK generation and the third makes a couple of places actually use the timeout value just determined rather than ignoring it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-302/+688
Pull networking fixes from David Miller: 1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones missed one spot. From Zhu Yanjun. 2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg. 3) Fix checksum offloading in thunderx driver, from Sunil Goutham. 4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger. 5) Fix use after free of packet headers in TIPC, from Jon Maloy. 6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva. 7) Tunneling fixes in mlxsw driver, from Petr Machata. 8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike Maloney. 9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric Dumazet. 10) Fix regression in sch_sfq.c due to one of the timer_setup() conversions. From Paolo Abeni. 11) SCTP does list_for_each_entry() using wrong struct member, fix from Xin Long. 12) Don't use big endian netlink attribute read for IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin Long. 13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing adding filters there. From Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) ethernet: dwmac-stm32: Fix copyright net: via: via-rhine: use %p to format void * address instead of %x net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit myri10ge: Update MAINTAINERS net: sched: cbq: create block for q->link.block atm: suni: remove extraneous space to fix indentation atm: lanai: use %p to format kernel addresses instead of %x VSOCK: Don't set sk_state to TCP_CLOSE before testing it atm: fore200e: use %pK to format kernel addresses instead of %x ambassador: fix incorrect indentation of assignment statement vxlan: use __be32 type for the param vni in __vxlan_fdb_delete bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM sctp: use right member as the param of list_for_each_entry sch_sfq: fix null pointer dereference at timer expiration cls_bpf: don't decrement net's refcount when offload fails net/packet: fix a race in packet_bind() and packet_notifier() packet: fix crash in fanout_demux_rollover() sctp: remove extern from stream sched sctp: force the params with right types for sctp csum apis sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail ...
2017-11-29rxrpc: Fix variable overwriteGustavo A. R. Silva2-2/+2
Values assigned to both variable resend_at and ack_at are overwritten before they can be used. The correct fix here is to add 'now' to the previously computed value in resend_at and ack_at. Addresses-Coverity-ID: 1462262 Addresses-Coverity-ID: 1462263 Addresses-Coverity-ID: 1462264 Fixes: beb8e5e4f38c ("rxrpc: Express protocol timeouts in terms of RTT") Link: https://marc.info/?i=17004.1511808959%40warthog.procyon.org.uk Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29rxrpc: Fix ACK generation from the connection event processorDavid Howells1-21/+29
Repeat terminal ACKs and now terminal ACKs are now generated from the connection event processor rather from call handling as this allows us to discard client call structures as soon as possible and free up the channel for a follow on call. However, in ACKs so generated, the additional information trailer is malformed because the padding that's meant to be in the middle isn't included in what's transmitted. Fix it so that the 3 bytes of padding are included in the transmission. Further, the trailer is misaligned because of the padding, so assigment to the u16 and u32 fields inside it might cause problems on some arches, so fix this by breaking the padding and the trailer out of the packed struct. (This also deals with potential compiler weirdies where some of the nested structs are packed and some aren't). The symptoms can be seen in wireshark as terminal DUPLICATE or IDLE ACK packets in which the Max MTU, Interface MTU and rwind fields have weird values and the Max Packets field is apparently missing. Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29rxrpc: Clean up whitespaceDavid Howells3-4/+4
Clean up some whitespace from rxrpc. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-27net: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-24rxrpc: Fix conn expiry timersDavid Howells5-28/+68
Fix the rxrpc connection expiry timers so that connections for closed AF_RXRPC sockets get deleted in a more timely fashion, freeing up the transport UDP port much more quickly. (1) Replace the delayed work items with work items plus timers so that timer_reduce() can be used to shorten them and so that the timer doesn't requeue the work item if the net namespace is dead. (2) Don't use queue_delayed_work() as that won't alter the timeout if the timer is already running. (3) Don't rearm the timers if the network namespace is dead. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Fix service endpoint expiryDavid Howells5-18/+45
RxRPC service endpoints expire like they're supposed to by the following means: (1) Mark dead rxrpc_net structs (with ->live) rather than twiddling the global service conn timeout, otherwise the first rxrpc_net struct to die will cause connections on all others to expire immediately from then on. (2) Mark local service endpoints for which the socket has been closed (->service_closed) so that the expiration timeout can be much shortened for service and client connections going through that endpoint. (3) rxrpc_put_service_conn() needs to schedule the reaper when the usage count reaches 1, not 0, as idle conns have a 1 count. (4) The accumulator for the earliest time we might want to schedule for should be initialised to jiffies + MAX_JIFFY_OFFSET, not ULONG_MAX as the comparison functions use signed arithmetic. (5) Simplify the expiration handling, adding the expiration value to the idle timestamp each time rather than keeping track of the time in the past before which the idle timestamp must go to be expired. This is much easier to read. (6) Ignore the timeouts if the net namespace is dead. (7) Restart the service reaper work item rather the client reaper. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Add keepalive for a callDavid Howells3-0/+34
We need to transmit a packet every so often to act as a keepalive for the peer (which has a timeout from the last time it received a packet) and also to prevent any intervening firewalls from closing the route. Do this by resetting a timer every time we transmit a packet. If the timer ever expires, we transmit a PING ACK packet and thereby also elicit a PING RESPONSE ACK from the other side - which prevents our last-rx timeout from expiring. The timer is set to 1/6 of the last-rx timeout so that we can detect the other side going away if it misses 6 replies in a row. This is particularly necessary for servers where the processing of the service function may take a significant amount of time. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Add a timeout for detecting lost ACKs/lost DATADavid Howells7-10/+89
Add an extra timeout that is set/updated when we send a DATA packet that has the request-ack flag set. This allows us to detect if we don't get an ACK in response to the latest flagged packet. The ACK packet is adjudged to have been lost if it doesn't turn up within 2*RTT of the transmission. If the timeout occurs, we schedule the sending of a PING ACK to find out the state of the other side. If a new DATA packet is ready to go sooner, we cancel the sending of the ping and set the request-ack flag on that instead. If we get back a PING-RESPONSE ACK that indicates a lower tx_top than what we had at the time of the ping transmission, we adjudge all the DATA packets sent between the response tx_top and the ping-time tx_top to have been lost and retransmit immediately. Rather than sending a PING ACK, we could just pick a DATA packet and speculatively retransmit that with request-ack set. It should result in either a REQUESTED ACK or a DUPLICATE ACK which we can then use in lieu the a PING-RESPONSE ACK mentioned above. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Express protocol timeouts in terms of RTTDavid Howells2-4/+25
Express protocol timeouts for data retransmission and deferred ack generation in terms on RTT rather than specified timeouts once we have sufficient RTT samples. For the moment, this requires just one RTT sample to be able to use this for ack deferral and two for data retransmission. The data retransmission timeout is set at RTT*1.5 and the ACK deferral timeout is set at RTT. Note that the calculated timeout is limited to a minimum of 4ns to make sure it doesn't happen too quickly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Don't transmit DELAY ACKs immediately on proposalDavid Howells1-2/+2
Don't transmit a DELAY ACK immediately on proposal when the Rx window is rotated, but rather defer it to the work function. This means that we have a chance to queue/consume more received packets before we actually send the DELAY ACK, or even cancel it entirely, thereby reducing the number of packets transmitted. We do, however, want to continue sending other types of packet immediately, particularly REQUESTED ACKs, as they may be used for RTT calculation by the other side. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Fix call timeoutsDavid Howells9-179/+242
Fix the rxrpc call expiration timeouts and make them settable from userspace. By analogy with other rx implementations, there should be three timeouts: (1) "Normal timeout" This is set for all calls and is triggered if we haven't received any packets from the peer in a while. It is measured from the last time we received any packet on that call. This is not reset by any connection packets (such as CHALLENGE/RESPONSE packets). If a service operation takes a long time, the server should generate PING ACKs at a duration that's substantially less than the normal timeout so is to keep both sides alive. This is set at 1/6 of normal timeout. (2) "Idle timeout" This is set only for a service call and is triggered if we stop receiving the DATA packets that comprise the request data. It is measured from the last time we received a DATA packet. (3) "Hard timeout" This can be set for a call and specified the maximum lifetime of that call. It should not be specified by default. Some operations (such as volume transfer) take a long time. Allow userspace to set/change the timeouts on a call with sendmsg, using a control message: RXRPC_SET_CALL_TIMEOUTS The data to the message is a number of 32-bit words, not all of which need be given: u32 hard_timeout; /* sec from first packet */ u32 idle_timeout; /* msec from packet Rx */ u32 normal_timeout; /* msec from data Rx */ This can be set in combination with any other sendmsg() that affects a call. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Split the call params from the operation paramsDavid Howells4-45/+60
When rxrpc_sendmsg() parses the control message buffer, it places the parameters extracted into a structure, but lumps together call parameters (such as user call ID) with operation parameters (such as whether to send data, send an abort or accept a call). Split the call parameters out into their own structure, a copy of which is then embedded in the operation parameters struct. The call parameters struct is then passed down into the places that need it instead of passing the individual parameters. This allows for extra call parameters to be added. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Delay terminal ACK transmission on a client callDavid Howells5-13/+108
Delay terminal ACK transmission on a client call by deferring it to the connection processor. This allows it to be skipped if we can send the next call instead, the first DATA packet of which will implicitly ack this call. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Provide a different lockdep key for call->user_mutex for kernel callsDavid Howells3-6/+17
Provide a different lockdep key for rxrpc_call::user_mutex when the call is made on a kernel socket, such as by the AFS filesystem. The problem is that lockdep registers a false positive between userspace calling the sendmsg syscall on a user socket where call->user_mutex is held whilst userspace memory is accessed whereas the AFS filesystem may perform operations with mmap_sem held by the caller. In such a case, the following warning is produced. ====================================================== WARNING: possible circular locking dependency detected 4.14.0-fscache+ #243 Tainted: G E ------------------------------------------------------ modpost/16701 is trying to acquire lock: (&vnode->io_lock){+.+.}, at: [<ffffffffa000fc40>] afs_begin_vnode_operation+0x33/0x77 [kafs] but task is already holding lock: (&mm->mmap_sem){++++}, at: [<ffffffff8104376a>] __do_page_fault+0x1ef/0x486 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){++++}: __might_fault+0x61/0x89 _copy_from_iter_full+0x40/0x1fa rxrpc_send_data+0x8dc/0xff3 rxrpc_do_sendmsg+0x62f/0x6a1 rxrpc_sendmsg+0x166/0x1b7 sock_sendmsg+0x2d/0x39 ___sys_sendmsg+0x1ad/0x22b __sys_sendmsg+0x41/0x62 do_syscall_64+0x89/0x1be return_from_SYSCALL_64+0x0/0x75 -> #2 (&call->user_mutex){+.+.}: __mutex_lock+0x86/0x7d2 rxrpc_new_client_call+0x378/0x80e rxrpc_kernel_begin_call+0xf3/0x154 afs_make_call+0x195/0x454 [kafs] afs_vl_get_capabilities+0x193/0x198 [kafs] afs_vl_lookup_vldb+0x5f/0x151 [kafs] afs_create_volume+0x2e/0x2f4 [kafs] afs_mount+0x56a/0x8d7 [kafs] mount_fs+0x6a/0x109 vfs_kern_mount+0x67/0x135 do_mount+0x90b/0xb57 SyS_mount+0x72/0x98 do_syscall_64+0x89/0x1be return_from_SYSCALL_64+0x0/0x75 -> #1 (k-sk_lock-AF_RXRPC){+.+.}: lock_sock_nested+0x74/0x8a rxrpc_kernel_begin_call+0x8a/0x154 afs_make_call+0x195/0x454 [kafs] afs_fs_get_capabilities+0x17a/0x17f [kafs] afs_probe_fileserver+0xf7/0x2f0 [kafs] afs_select_fileserver+0x83f/0x903 [kafs] afs_fetch_status+0x89/0x11d [kafs] afs_iget+0x16f/0x4f8 [kafs] afs_mount+0x6c6/0x8d7 [kafs] mount_fs+0x6a/0x109 vfs_kern_mount+0x67/0x135 do_mount+0x90b/0xb57 SyS_mount+0x72/0x98 do_syscall_64+0x89/0x1be return_from_SYSCALL_64+0x0/0x75 -> #0 (&vnode->io_lock){+.+.}: lock_acquire+0x174/0x19f __mutex_lock+0x86/0x7d2 afs_begin_vnode_operation+0x33/0x77 [kafs] afs_fetch_data+0x80/0x12a [kafs] afs_readpages+0x314/0x405 [kafs] __do_page_cache_readahead+0x203/0x2ba filemap_fault+0x179/0x54d __do_fault+0x17/0x60 __handle_mm_fault+0x6d7/0x95c handle_mm_fault+0x24e/0x2a3 __do_page_fault+0x301/0x486 do_page_fault+0x236/0x259 page_fault+0x22/0x30 __clear_user+0x3d/0x60 padzero+0x1c/0x2b load_elf_binary+0x785/0xdc7 search_binary_handler+0x81/0x1ff do_execveat_common.isra.14+0x600/0x888 do_execve+0x1f/0x21 SyS_execve+0x28/0x2f do_syscall_64+0x89/0x1be return_from_SYSCALL_64+0x0/0x75 other info that might help us debug this: Chain exists of: &vnode->io_lock --> &call->user_mutex --> &mm->mmap_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(&call->user_mutex); lock(&mm->mmap_sem); lock(&vnode->io_lock); *** DEADLOCK *** 1 lock held by modpost/16701: #0: (&mm->mmap_sem){++++}, at: [<ffffffff8104376a>] __do_page_fault+0x1ef/0x486 stack backtrace: CPU: 0 PID: 16701 Comm: modpost Tainted: G E 4.14.0-fscache+ #243 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: dump_stack+0x67/0x8e print_circular_bug+0x341/0x34f check_prev_add+0x11f/0x5d4 ? add_lock_to_list.isra.12+0x8b/0x8b ? add_lock_to_list.isra.12+0x8b/0x8b ? __lock_acquire+0xf77/0x10b4 __lock_acquire+0xf77/0x10b4 lock_acquire+0x174/0x19f ? afs_begin_vnode_operation+0x33/0x77 [kafs] __mutex_lock+0x86/0x7d2 ? afs_begin_vnode_operation+0x33/0x77 [kafs] ? afs_begin_vnode_operation+0x33/0x77 [kafs] ? afs_begin_vnode_operation+0x33/0x77 [kafs] afs_begin_vnode_operation+0x33/0x77 [kafs] afs_fetch_data+0x80/0x12a [kafs] afs_readpages+0x314/0x405 [kafs] __do_page_cache_readahead+0x203/0x2ba ? filemap_fault+0x179/0x54d filemap_fault+0x179/0x54d __do_fault+0x17/0x60 __handle_mm_fault+0x6d7/0x95c handle_mm_fault+0x24e/0x2a3 __do_page_fault+0x301/0x486 do_page_fault+0x236/0x259 page_fault+0x22/0x30 RIP: 0010:__clear_user+0x3d/0x60 RSP: 0018:ffff880071e93da0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000000000011c RCX: 000000000000011c RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000060f720 RBP: 000000000060f720 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffff8800b5459b68 R12: ffff8800ce150e00 R13: 000000000060f720 R14: 00000000006127a8 R15: 0000000000000000 padzero+0x1c/0x2b load_elf_binary+0x785/0xdc7 search_binary_handler+0x81/0x1ff do_execveat_common.isra.14+0x600/0x888 do_execve+0x1f/0x21 SyS_execve+0x28/0x2f do_syscall_64+0x89/0x1be entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fdb6009ee07 RSP: 002b:00007fff566d9728 EFLAGS: 00000246 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 000055ba57280900 RCX: 00007fdb6009ee07 RDX: 000055ba5727f270 RSI: 000055ba5727cac0 RDI: 000055ba57280900 RBP: 000055ba57280900 R08: 00007fff566d9700 R09: 0000000000000000 R10: 000055ba5727cac0 R11: 0000000000000246 R12: 0000000000000000 R13: 000055ba5727cac0 R14: 000055ba5727f270 R15: 0000000000000000 Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: Don't set upgrade by default in sendmsg()David Howells1-1/+1
Don't set upgrade by default when creating a call from sendmsg(). This is a holdover from when I was testing the code. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24rxrpc: The mutex lock returned by rxrpc_accept_call() needs releasingDavid Howells1-2/+3
The caller of rxrpc_accept_call() must release the lock on call->user_mutex returned by that function. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-4/+3
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-14Merge tag 'rxrpc-next-20171111' of ↵David S. Miller7-7/+36
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fixes Here are some patches that fix some things in AF_RXRPC: (1) Prevent notifications from being passed to a kernel service for a call that it has ended. (2) Fix a null pointer deference that occurs under some circumstances when an ACK is generated. (3) Fix a number of things to do with call expiration. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02rxrpc: Fix call expiry handlingDavid Howells3-3/+11
Fix call expiry handling in the following ways (1) If all the request data from a client call is acked, don't send a follow up IDLE ACK with firstPacket == 1 and previousPacket == 0 as this appears to fool some servers into thinking everything has been accepted. (2) Never send an abort back to the server once it has ACK'd all the request packets; rather just try to reuse the channel for the next call. The first request DATA packet of the next call on the same channel will implicitly ACK the entire reply of the dead call - even if we haven't transmitted it yet. (3) Don't send RX_CALL_TIMEOUT in an ABORT packet, librx uses abort codes to pass local errors to the caller in addition to remote errors, and this is meant to be local only. The following also need to be addressed in future patches: (4) Service calls should send PING ACKs as 'keep alives' if the server is still processing the call. (5) VERSION REPLY packets should be sent to the peers of service connections to act as keep-alives. This is used to keep firewall routes in place. The AFS CM should enable this. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02rxrpc: Fix a null ptr deref in rxrpc_fill_out_ack()David Howells1-4/+5
rxrpc_fill_out_ack() needs to be passed the connection pointer from its caller rather than using call->conn as the call may be disconnected in parallel with it, clearing call->conn, leading to: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: rxrpc_send_ack_packet+0x231/0x6a4 Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02rxrpc: Lock around calling a kernel service Rx notificationDavid Howells4-0/+20
Place a spinlock around the invocation of call->notify_rx() for a kernel service call and lock again when ending the call and replace the notification pointer with a pointer to a dummy function. This is required because it's possible for rxrpc_notify_socket() to be called after the call has been ended by the kernel service if called from the asynchronous work function rxrpc_process_call(). However, rxrpc_notify_socket() currently only holds the RCU read lock when invoking ->notify_rx(), which means that the afs_call struct would need to be disposed of by call_rcu() rather than by kfree(). But we shouldn't see any notifications from a call after calling rxrpc_kernel_end_call(), so a lock is required in rxrpc code. Without this, we may see the call wait queue as having a corrupt spinlock: BUG: spinlock bad magic on CPU#0, kworker/0:2/1612 general protection fault: 0000 [#1] SMP ... Workqueue: krxrpcd rxrpc_process_call task: ffff88040b83c400 task.stack: ffff88040adfc000 RIP: 0010:spin_bug+0x161/0x18f RSP: 0018:ffff88040adffcc0 EFLAGS: 00010002 RAX: 0000000000000032 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffff81ab16cf RDX: ffff88041fa14c01 RSI: ffff88041fa0ccb8 RDI: ffff88041fa0ccb8 RBP: ffff88040adffcd8 R08: 00000000ffffffff R09: 00000000ffffffff R10: ffff88040adffc60 R11: 000000000000022c R12: ffff88040aca2208 R13: ffffffff81a58114 R14: 0000000000000000 R15: 0000000000000000 .... Call Trace: do_raw_spin_lock+0x1d/0x89 _raw_spin_lock_irqsave+0x3d/0x49 ? __wake_up_common_lock+0x4c/0xa7 __wake_up_common_lock+0x4c/0xa7 ? __lock_is_held+0x47/0x7a __wake_up+0xe/0x10 afs_wake_up_call_waiter+0x11b/0x122 [kafs] rxrpc_notify_socket+0x12b/0x258 rxrpc_process_call+0x18e/0x7d0 process_one_work+0x298/0x4de ? rescuer_thread+0x280/0x280 worker_thread+0x1d1/0x2ae ? rescuer_thread+0x280/0x280 kthread+0x12c/0x134 ? kthread_create_on_node+0x3a/0x3a ret_from_fork+0x27/0x40 In this case, note the corrupt data in EBX. The address of the offending afs_call is in R12, plus the offset to the spinlock. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24net: rxrpc: mark expected switch fall-throughsGustavo A. R. Silva3-0/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22rxrpc: Don't release call mutex on error pointerDavid Howells1-2/+3
Don't release call mutex at the end of rxrpc_kernel_begin_call() if the call pointer actually holds an error value. Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signalsDavid Howells1-26/+81
Make AF_RXRPC accept MSG_WAITALL as a flag to sendmsg() to tell it to ignore signals whilst loading up the message queue, provided progress is being made in emptying the queue at the other side. Progress is defined as the base of the transmit window having being advanced within 2 RTT periods. If the period is exceeded with no progress, sendmsg() will return anyway, indicating how much data has been copied, if any. Once the supplied buffer is entirely decanted, the sendmsg() will return. Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18rxrpc: Provide functions for allowing cleaner handling of signalsDavid Howells2-0/+32
Provide a couple of functions to allow cleaner handling of signals in a kernel service. They are: (1) rxrpc_kernel_get_rtt() This allows the kernel service to find out the RTT time for a call, so as to better judge how large a timeout to employ. Note, though, that whilst this returns a value in nanoseconds, the timeouts can only actually be in jiffies. (2) rxrpc_kernel_check_life() This returns a number that is updated when ACKs are received from the peer (notably including PING RESPONSE ACKs which we can elicit by sending PING ACKs to see if the call still exists on the server). The caller should compare the numbers of two calls to see if the call is still alive. These can be used to provide an extending timeout rather than returning immediately in the case that a signal occurs that would otherwise abort an RPC operation. The timeout would be extended if the server is still responsive and the call is still apparently alive on the server. For most operations this isn't that necessary - but for FS.StoreData it is: OpenAFS writes the data to storage as it comes in without making a backup, so if we immediately abort it when partially complete on a CTRL+C, say, we have no idea of the state of the file after the abort. Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18rxrpc: Support service upgrade from a kernel serviceDavid Howells2-2/+8
Provide support for a kernel service to make use of the service upgrade facility. This involves: (1) Pass an upgrade request flag to rxrpc_kernel_begin_call(). (2) Make rxrpc_kernel_recv_data() return the call's current service ID so that the caller can detect service upgrade and see what the service was upgraded to. Signed-off-by: David Howells <dhowells@redhat.com>
2017-09-05rxrpc: Make service connection lookup always check for retryDavid Howells1-2/+1
When an RxRPC service packet comes in, the target connection is looked up by an rb-tree search under RCU and a read-locked seqlock; the seqlock retry check is, however, currently skipped if we got a match, but probably shouldn't be in case the connection we found gets replaced whilst we're doing a search. Make the lookup procedure always go through need_seqretry(), even if the lookup was successful. This makes sure we always pick up on a write-lock event. On the other hand, since we don't take a ref on the object, but rely on RCU to prevent its destruction after dropping the seqlock, I'm not sure this is necessary. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29rxrpc: Allow failed client calls to be retriedDavid Howells5-31/+200
Allow a client call that failed on network error to be retried, provided that the Tx queue still holds DATA packet 1. This allows an operation to be submitted to another server or another address for the same server without having to repackage and re-encrypt the data so far processed. Two new functions are provided: (1) rxrpc_kernel_check_call() - This is used to find out the completion state of a call to guess whether it can be retried and whether it should be retried. (2) rxrpc_kernel_retry_call() - Disconnect the call from its current connection, reset the state and submit it as a new client call to a new address. The new address need not match the previous address. A call may be retried even if all the data hasn't been loaded into it yet; a partially constructed will be retained at the same point it was at when an error condition was detected. msg_data_left() can be used to find out how much data was packaged before the error occurred. Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29rxrpc: Add notification of end-of-Tx phaseDavid Howells1-7/+27
Add a callback to rxrpc_kernel_send_data() so that a kernel service can get a notification that the AF_RXRPC call has transitioned out the Tx phase and is now waiting for a reply or a final ACK. This is called from AF_RXRPC with the call state lock held so the notification is guaranteed to come before any reply is passed back. Further, modify the AFS filesystem to make use of this so that we don't have to change the afs_call state before sending the last bit of data. Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29rxrpc: Remove some excess whitespaceDavid Howells1-3/+3
Remove indentation from some blank lines. Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29rxrpc: Don't negate call->error before returning itDavid Howells1-4/+4
call->error is stored as 0 or a negative error code. Don't negate this value (ie. make it positive) before returning it from a kernel function (though it should still be negated before passing to userspace through a control message). Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29rxrpc: Fix IPv6 supportDavid Howells8-18/+31
Fix IPv6 support in AF_RXRPC in the following ways: (1) When extracting the address from a received IPv4 packet, if the local transport socket is open for IPv6 then fill out the sockaddr_rxrpc struct for an IPv4-mapped-to-IPv6 AF_INET6 transport address instead of an AF_INET one. (2) When sending CHALLENGE or RESPONSE packets, the transport length needs to be set from the sockaddr_rxrpc::transport_len field rather than sizeof() on the IPv4 transport address. (3) When processing an IPv4 ICMP packet received by an IPv6 socket, set up the address correctly before searching for the affected peer. Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29rxrpc: Use correct timestamp from Kerberos 5 ticketDavid Howells1-1/+1
When an XDR-encoded Kerberos 5 ticket is added as an rxrpc-type key, the expiry time should be drawn from the k5 part of the token union (which was what was filled in), rather than the kad part of the union. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29net: rxrpc: Replace time_t type with time64_t typeBaolin Wang3-16/+22
Since the 'expiry' variable of 'struct key_preparsed_payload' has been changed to 'time64_t' type, which is year 2038 safe on 32bits system. In net/rxrpc subsystem, we need convert 'u32' type to 'time64_t' type when copying ticket expires time to 'prep->expiry', then this patch introduces two helper functions to help convert 'u32' to 'time64_t' type. This patch also uses ktime_get_real_seconds() to get current time instead of get_seconds() which is not year 2038 safe on 32bits system. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 21:10:33 +0000