summaryrefslogtreecommitdiffstats
path: root/net/rds/recv.c
AgeCommit message (Collapse)AuthorFilesLines
2019-02-04rds: add type of service(tos) infrastructureSantosh Shilimkar1-0/+1
RDS Service type (TOS) is user-defined and needs to be configured via RDS IOCTL interface. It must be set before initiating any traffic and once set the TOS can not be changed. All out-going traffic from the socket will be associated with its TOS. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-03socket: Add SO_TIMESTAMP[NS]_NEWDeepa Dinamani1-2/+14
Add SO_TIMESTAMP_NEW and SO_TIMESTAMPNS_NEW variants of socket timestamp options. These are the y2038 safe versions of the SO_TIMESTAMP_OLD and SO_TIMESTAMPNS_OLD for all architectures. Note that the format of scm_timestamping.ts[0] is not changed in this patch. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: jejb@parisc-linux.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: linux-alpha@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03socket: Use old_timeval types for socket timestampsDeepa Dinamani1-1/+1
As part of y2038 solution, all internal uses of struct timeval are replaced by struct __kernel_old_timeval and struct compat_timeval by struct old_timeval32. Make socket timestamps use these new types. This is mainly to be able to verify that the kernel build is y2038 safe when such non y2038 safe types are not supported anymore. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: isdn@linux-pingi.de Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03sockopt: Rename SO_TIMESTAMP* to SO_TIMESTAMP*_OLDDeepa Dinamani1-1/+1
SO_TIMESTAMP, SO_TIMESTAMPNS and SO_TIMESTAMPING options, the way they are currently defined, are not y2038 safe. Subsequent patches in the series add new y2038 safe versions of these options which provide 64 bit timestamps on all architectures uniformly. Hence, rename existing options with OLD tag suffixes. Also note that kernel will not use the untagged SO_TIMESTAMP* and SCM_TIMESTAMP* options internally anymore. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: deller@gmx.de Cc: dhowells@redhat.com Cc: jejb@parisc-linux.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: linux-afs@lists.infradead.org Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: rds: use memset to optimize the recvZhu Yanjun1-4/+1
The function rds_inc_init is in recv process. To use memset can optimize the function rds_inc_init. The test result: Before: 1) + 24.950 us | rds_inc_init [rds](); After: 1) + 10.990 us | rds_inc_init [rds](); Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01rds: store socket timestamps as ktime_tArnd Bergmann1-8/+6
rds is the last in-kernel user of the old do_gettimeofday() function. Convert it over to ktime_get_real() to make it work more like the generic socket timestamps, and to let us kill off do_gettimeofday(). A follow-up patch will have to change the user space interface to deal better with 32-bit tasks, which may use an incompatible layout for 'struct timespec'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rds: Remove IPv6 dependencyKa-Cheong Poon1-0/+2
This patch removes the IPv6 dependency from RDS. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Extend RDS API for IPv6 supportKa-Cheong Poon1-0/+25
There are many data structures (RDS socket options) used by RDS apps which use a 32 bit integer to store IP address. To support IPv6, struct in6_addr needs to be used. To ensure backward compatibility, a new data structure is introduced for each of those data structures which use a 32 bit integer to represent an IP address. And new socket options are introduced to use those new structures. This means that existing apps should work without a problem with the new RDS module. For apps which want to use IPv6, those new data structures and socket options can be used. IPv4 mapped address is used to represent IPv4 address in the new data structures. v4: Revert changes to SO_RDS_TRANSPORT Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Enable RDS IPv6 supportKa-Cheong Poon1-1/+1
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the listener is now an IPv6 endpoint which accepts both IPv4 and IPv6 connection requests. RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. v5: Fixed syntax problem (David Miller). v4: Changed port history comments in rds.h (Sowmini Varadhan). v3: Added support to set up IPv4 connection using mapped address (David Miller). Added support to set up connection between link local and non-link addresses. Various review comments from Santosh Shilimkar and Sowmini Varadhan. v2: Fixed bound and peer address scope mismatched issue. Added back rds_connect() IPv6 changes. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Changing IP address internal representation to struct in6_addrKa-Cheong Poon1-17/+34
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. But RDS socket layer is not modified such that it still does not accept IPv6 address from an application. And RDS layer does not accept nor initiate IPv6 connections. v2: Fixed sparse warnings. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-14rds: avoid unenecessary cong_update in loop transportSantosh Shilimkar1-0/+5
Loop transport which is self loopback, remote port congestion update isn't relevant. Infact the xmit path already ignores it. Receive path needs to do the same. Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03rds: do not leak kernel memory to user landEric Dumazet1-0/+1
syzbot/KMSAN reported an uninit-value in put_cmsg(), originating from rds_cmsg_recv(). Simply clear the structure, since we have holes there, or since rx_traces might be smaller than RDS_MSG_RX_DGRAM_TRACE_MAX. BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in put_cmsg+0x600/0x870 net/core/scm.c:242 CPU: 0 PID: 4459 Comm: syz-executor582 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x600/0x870 net/core/scm.c:242 rds_cmsg_recv net/rds/recv.c:570 [inline] rds_recvmsg+0x2db5/0x3170 net/rds/recv.c:657 sock_recvmsg_nosec net/socket.c:803 [inline] sock_recvmsg+0x1d0/0x230 net/socket.c:810 ___sys_recvmsg+0x3fb/0x810 net/socket.c:2205 __sys_recvmsg net/socket.c:2250 [inline] SYSC_recvmsg+0x298/0x3c0 net/socket.c:2262 SyS_recvmsg+0x54/0x80 net/socket.c:2257 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 3289025aedc0 ("RDS: add receive message trace used by application") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: linux-rdma <linux-rdma@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07rds: use list structure to track information for zerocopy completion ↵Sowmini Varadhan1-7/+16
notification Commit 401910db4cd4 ("rds: deliver zerocopy completion notification with data") removes support fo r zerocopy completion notification on the sk_error_queue, thus we no longer need to track the cookie information in sk_buff structures. This commit removes the struct sk_buff_head rs_zcookie_queue by a simpler list that results in a smaller memory footprint as well as more efficient memory_allocation time. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27rds: deliver zerocopy completion notification with dataSowmini Varadhan1-1/+30
This commit is an optimization over commit 01883eda72bd ("rds: support for zcopy completion notification") for PF_RDS sockets. RDS applications are predominantly request-response transactions, so it is more efficient to reduce the number of system calls and have zerocopy completion notification delivered as ancillary data on the POLLIN channel. Cookies are passed up as ancillary data (at level SOL_RDS) in a struct rds_zcopy_cookies when the returned value of recvmsg() is greater than, or equal to, 0. A max of RDS_MAX_ZCOOKIES may be passed with each message. This commit removes support for zerocopy completion notification on MSG_ERRQUEUE for PF_RDS sockets. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16rds: support for zcopy completion notificationSowmini Varadhan1-0/+2
RDS removes a datagram (rds_message) from the retransmit queue when an ACK is received. The ACK indicates that the receiver has queued the RDS datagram, so that the sender can safely forget the datagram. When all references to the rds_message are quiesced, rds_message_purge is called to release resources used by the rds_message If the datagram to be removed had pinned pages set up, add an entry to the rs->rs_znotify_queue so that the notifcation will be sent up via rds_rm_zerocopy_callback() when the rds_message is eventually freed by rds_message_purge. rds_rm_zerocopy_callback() attempts to batch the number of cookies sent with each notification to a max of SO_EE_ORIGIN_MAX_ZCOOKIES. This is achieved by checking the tail skb in the sk_error_queue: if this has room for one more cookie, the cookie from the current notification is added; else a new skb is added to the sk_error_queue. Every invocation of rds_rm_zerocopy_callback() will trigger a ->sk_error_report to notify the application. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04net, rds: convert rds_incoming.i_refcount from atomic_t to refcount_tReshetova, Elena1-6/+6
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-22rds: tcp: send handshake ping-probe from passive endpointSowmini Varadhan1-3/+3
The RDS handshake ping probe added by commit 5916e2c1554f ("RDS: TCP: Enable multipath RDS for TCP") is sent from rds_sendmsg() before the first data packet is sent to a peer. If the conversation is not bidirectional (i.e., one side is always passive and never invokes rds_sendmsg()) and the passive side restarts its rds_tcp module, a new HS ping probe needs to be sent, so that the number of paths can be re-established. This patch achieves that by sending a HS ping probe from rds_tcp_accept_one() when c_npaths is 0 (i.e., we have not done a handshake probe with this peer yet). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Jenny Xu <jenny.x.xu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16rds: tcp: various endian-ness fixesSowmini Varadhan1-5/+7
Found when testing between sparc and x86 machines on different subnets, so the address comparison patterns hit the corner cases and brought out some bugs fixed by this patch. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Imanti Mendez <imanti.mendez@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21rds: make use of iov_iter_revert()Al Viro1-3/+1
2017-01-02RDS: add receive message trace used by applicationSantosh Shilimkar1-3/+29
Socket option to tap receive path latency in various stages in nano seconds. It can be enabled on selective sockets using using SO_RDS_MSG_RXPATH_LATENCY socket option. RDS will return the data to application with RDS_CMSG_RXPATH_LATENCY in defined format. Scope is left to add more trace points for future without need of change in the interface. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-01-02RDS: add stat for socket recv memory usageVenkat Venkatsubra1-0/+4
Tracks the receive side memory added to scokets and removed from sockets. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2016-11-17RDS: TCP: Track peer's connection generation numberSowmini Varadhan1-0/+36
The RDS transport has to be able to distinguish between two types of failure events: (a) when the transport fails (e.g., TCP connection reset) but the RDS socket/connection layer on both sides stays the same (b) when the peer's RDS layer itself resets (e.g., due to module reload or machine reboot at the peer) In case (a) both sides must reconnect and continue the RDS messaging without any message loss or disruption to the message sequence numbers, and this is achieved by rds_send_path_reset(). In case (b) we should reset all rds_connection state to the new incarnation of the peer. Examples of state that needs to be reset are next expected rx sequence number from, or messages to be retransmitted to, the new incarnation of the peer. To achieve this, the RDS handshake probe added as part of commit 5916e2c1554f ("RDS: TCP: Enable multipath RDS for TCP") is enhanced so that sender and receiver of the RDS ping-probe will add a generation number as part of the RDS_EXTHDR_GEN_NUM extension header. Each peer stores local and remote generation numbers as part of each rds_connection. Changes in generation number will be detected via incoming handshake probe ping request or response and will allow the receiver to reset rds_connection state. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15RDS: TCP: Enable multipath RDS for TCPSowmini Varadhan1-0/+75
Use RDS probe-ping to compute how many paths may be used with the peer, and to synchronously start the multiple paths. If mprds is supported, hash outgoing traffic to one of multiple paths in rds_sendmsg() when multipath RDS is supported by the transport. CC: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01RDS: Do not send a pong to an incoming ping with 0 src portSowmini Varadhan1-0/+4
RDS ping messages are sent with a non-zero src port to a zero dst port, so that the rds pong messages can be sent back to the originators src port. However if a confused/malicious sender sends a ping with a 0 src port, we'd have an infinite ping-pong loop. To avoid this, the receiver should ignore ping messages with a 0 src port. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Make rds_send_pong() take a rds_conn_path argumentSowmini Varadhan1-1/+1
This commit allows rds_send_pong() callers to send back the rds pong message on some path other than c_path[0] by passing in a struct rds_conn_path * argument. It also removes the last dependency on the #defines in rds_single.h from send.c Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: rds_inc_path_init() helper function for MP capable transportsSowmini Varadhan1-0/+14
t_mp_capable transports can use rds_inc_path_init to initialize all fields in struct rds_incoming, including the i_conn_path. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: recv path gets the conn_path from rds_incoming for MP capable transportsSowmini Varadhan1-4/+8
Transports that are t_mp_capable should set the rds_conn_path on which the datagram was recived in the ->i_conn_path field of struct rds_incoming. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: split out connection specific state from rds_connection to rds_conn_pathSowmini Varadhan1-0/+1
In preparation for multipath RDS, split the rds_connection structure into a base structure, and a per-path struct rds_conn_path. The base structure tracks information and locks common to all paths. The workqs for send/recv/shutdown etc are tracked per rds_conn_path. Thus the workq callbacks now work with rds_conn_path. This commit allows for one rds_conn_path per rds_connection, and will be extended into multiple conn_paths in subsequent commits. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02rds: fix an infoleak in rds_inc_info_copyKangjie Lu1-0/+2
The last field "flags" of object "minfo" is not initialized. Copying this object out may leak kernel stack data. Assign 0 to it to avoid leak. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02RDS: Add support for SO_TIMESTAMP for incoming messagessantosh.shilimkar@oracle.com1-2/+18
The SO_TIMESTAMP generates time stamp for each incoming RDS messages User app can enable it by using SO_TIMESTAMP setsocketopt() at SOL_SOCKET level. CMSG data of cmsg type SO_TIMESTAMP contains the time stamp in struct timeval format. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue1-2/+2
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09put iov_iter into msghdrAl Viro1-3/+4
Note that the code _using_ ->msg_iter at that point will be very unhappy with anything other than unshifted iovec-backed iov_iter. We still need to convert users to proper primitives. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24rds: switch ->inc_copy_to_user() to passing iov_iterAl Viro1-2/+3
instances get considerably simpler from that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-18net: add build-time checks for msg->msg_name sizeSteffen Hurrle1-2/+1
This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: Steffen Hurrle <steffen@hurrle.net> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa1-2/+0
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23rds: set correct msg_namelenWeiping Pan1-0/+3
Jay Fenlason (fenlason@redhat.com) found a bug, that recvfrom() on an RDS socket can return the contents of random kernel memory to userspace if it was called with a address length larger than sizeof(struct sockaddr_in). rds_recvmsg() also fails to set the addr_len paramater properly before returning, but that's just a bug. There are also a number of cases wher recvfrom() can return an entirely bogus address. Anything in rds_recvmsg() that returns a non-negative value but does not go through the "sin = (struct sockaddr_in *)msg->msg_name;" code path at the end of the while(1) loop will return up to 128 bytes of kernel memory to userspace. And I write two test programs to reproduce this bug, you will see that in rds_server, fromAddr will be overwritten and the following sock_fd will be destroyed. Yes, it is the programmer's fault to set msg_namelen incorrectly, but it is better to make the kernel copy the real length of address to user space in such case. How to run the test programs ? I test them on 32bit x86 system, 3.5.0-rc7. 1 compile gcc -o rds_client rds_client.c gcc -o rds_server rds_server.c 2 run ./rds_server on one console 3 run ./rds_client on another console 4 you will see something like: server is waiting to receive data... old socket fd=3 server received data from client:data from client msg.msg_namelen=32 new socket fd=-1067277685 sendmsg() : Bad file descriptor /***************** rds_client.c ********************/ int main(void) { int sock_fd; struct sockaddr_in serverAddr; struct sockaddr_in toAddr; char recvBuffer[128] = "data from client"; struct msghdr msg; struct iovec iov; sock_fd = socket(AF_RDS, SOCK_SEQPACKET, 0); if (sock_fd < 0) { perror("create socket error\n"); exit(1); } memset(&serverAddr, 0, sizeof(serverAddr)); serverAddr.sin_family = AF_INET; serverAddr.sin_addr.s_addr = inet_addr("127.0.0.1"); serverAddr.sin_port = htons(4001); if (bind(sock_fd, (struct sockaddr*)&serverAddr, sizeof(serverAddr)) < 0) { perror("bind() error\n"); close(sock_fd); exit(1); } memset(&toAddr, 0, sizeof(toAddr)); toAddr.sin_family = AF_INET; toAddr.sin_addr.s_addr = inet_addr("127.0.0.1"); toAddr.sin_port = htons(4000); msg.msg_name = &toAddr; msg.msg_namelen = sizeof(toAddr); msg.msg_iov = &iov; msg.msg_iovlen = 1; msg.msg_iov->iov_base = recvBuffer; msg.msg_iov->iov_len = strlen(recvBuffer) + 1; msg.msg_control = 0; msg.msg_controllen = 0; msg.msg_flags = 0; if (sendmsg(sock_fd, &msg, 0) == -1) { perror("sendto() error\n"); close(sock_fd); exit(1); } printf("client send data:%s\n", recvBuffer); memset(recvBuffer, '\0', 128); msg.msg_name = &toAddr; msg.msg_namelen = sizeof(toAddr); msg.msg_iov = &iov; msg.msg_iovlen = 1; msg.msg_iov->iov_base = recvBuffer; msg.msg_iov->iov_len = 128; msg.msg_control = 0; msg.msg_controllen = 0; msg.msg_flags = 0; if (recvmsg(sock_fd, &msg, 0) == -1) { perror("recvmsg() error\n"); close(sock_fd); exit(1); } printf("receive data from server:%s\n", recvBuffer); close(sock_fd); return 0; } /***************** rds_server.c ********************/ int main(void) { struct sockaddr_in fromAddr; int sock_fd; struct sockaddr_in serverAddr; unsigned int addrLen; char recvBuffer[128]; struct msghdr msg; struct iovec iov; sock_fd = socket(AF_RDS, SOCK_SEQPACKET, 0); if(sock_fd < 0) { perror("create socket error\n"); exit(0); } memset(&serverAddr, 0, sizeof(serverAddr)); serverAddr.sin_family = AF_INET; serverAddr.sin_addr.s_addr = inet_addr("127.0.0.1"); serverAddr.sin_port = htons(4000); if (bind(sock_fd, (struct sockaddr*)&serverAddr, sizeof(serverAddr)) < 0) { perror("bind error\n"); close(sock_fd); exit(1); } printf("server is waiting to receive data...\n"); msg.msg_name = &fromAddr; /* * I add 16 to sizeof(fromAddr), ie 32, * and pay attention to the definition of fromAddr, * recvmsg() will overwrite sock_fd, * since kernel will copy 32 bytes to userspace. * * If you just use sizeof(fromAddr), it works fine. * */ msg.msg_namelen = sizeof(fromAddr) + 16; /* msg.msg_namelen = sizeof(fromAddr); */ msg.msg_iov = &iov; msg.msg_iovlen = 1; msg.msg_iov->iov_base = recvBuffer; msg.msg_iov->iov_len = 128; msg.msg_control = 0; msg.msg_controllen = 0; msg.msg_flags = 0; while (1) { printf("old socket fd=%d\n", sock_fd); if (recvmsg(sock_fd, &msg, 0) == -1) { perror("recvmsg() error\n"); close(sock_fd); exit(1); } printf("server received data from client:%s\n", recvBuffer); printf("msg.msg_namelen=%d\n", msg.msg_namelen); printf("new socket fd=%d\n", sock_fd); strcat(recvBuffer, "--data from server"); if (sendmsg(sock_fd, &msg, 0) == -1) { perror("sendmsg()\n"); close(sock_fd); exit(1); } } close(sock_fd); return 0; } Signed-off-by: Weiping Pan <wpan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-20rds: remove the second argument of k[un]map_atomic()Cong Wang1-1/+1
Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-10-21rds: make local functions/variables staticstephen hemminger1-2/+1
The RDS protocol has lots of functions that should be declared static. rds_message_get/add_version_extension is removed since it defined but never used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08RDS: WhitespaceAndy Grover1-2/+2
Tidy up some whitespace issues. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: fold rdma.h into rds.hAndy Grover1-1/+0
RDMA is now an intrinsic part of RDS, so it's easier to just have a single header. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: cleanup: remove "== NULL"s and "!= NULL"s in ptr comparisonsAndy Grover1-2/+2
Favor "if (foo)" style over "if (foo != NULL)". Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-08-18rds: fix a leak of kernel memoryEric Dumazet1-1/+1
struct rds_rdma_notify contains a 32 bits hole on 64bit arches, make sure it is zeroed before copying it to user. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20net: sk_sleep() helperEric Dumazet1-1/+1
Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-11-29net: Move && and || to end of previous lineJoe Perches1-6/+5
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23RDS: Export symbols from core RDSAndy Grover1-0/+4
Now that rdma and tcp transports will be modularized, we need to export a number of functions so they can call them. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20RDS: Fix completion notifications on blocking socketsAndy Grover1-11/+13
Completion or congestion notifications were not being checked if the socket went to sleep. This patch fixes that. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26RDS: recv.cAndy Grover1-0/+542
Upon receiving a datagram from the transport, RDS parses the headers and potentially queues an ACK. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>