summaryrefslogtreecommitdiffstats
path: root/net/ipv6/ip6_tunnel.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-02ip6_tunnel: Match to ARPHRD_TUNNEL6 for dev typeSheena Mira-ato1-2/+2
The device type for ip6 tunnels is set to ARPHRD_TUNNEL6. However, the ip4ip6_err function is expecting the device type of the tunnel to be ARPHRD_TUNNEL. Since the device types do not match, the function exits and the ICMP error packet is not sent to the originating host. Note that the device type for IPv4 tunnels is set to ARPHRD_TUNNEL. Fix is to expect a tunnel device type of ARPHRD_TUNNEL6 instead. Now the tunnel device type matches and the ICMP error packet is sent to the originating host. Signed-off-by: Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01ip: validate header length on virtual device xmitWillem de Bruijn1-7/+3
KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-21ipv6: tunnels: fix two use-after-freeEric Dumazet1-0/+1
xfrm6_policy_check() might have re-allocated skb->head, we need to reload ipv6 header pointer. sysbot reported : BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40 Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304 CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40 ipv6_addr_type include/net/ipv6.h:403 [inline] ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727 ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757 vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443 IPVS: ftp: loaded support on port[0] = 21 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083 process_backlog+0x24e/0x7a0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412 __do_softirq+0x308/0xb7e kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 </IRQ> do_softirq.part.14+0x126/0x160 kernel/softirq.c:337 do_softirq+0x19/0x20 kernel/softirq.c:340 netif_rx_ni+0x521/0x860 net/core/dev.c:4569 dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84 ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727 ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176 ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727 ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747 rawv6_push_pending_frames net/ipv6/raw.c:615 [inline] rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945 kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>' kobject: 'queues' (0000000089e6eea2): kobject_uevent_env inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop! sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 sock_write_iter+0x35e/0x5c0 net/socket.c:900 call_write_iter include/linux/fs.h:1857 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues' kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0' __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues' entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457669 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669 RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003 kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4 R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff Allocated by task 1304: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc_node mm/slab.c:3684 [inline] __kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698 __kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140 __alloc_skb+0x155/0x760 net/core/skbuff.c:208 kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0' alloc_skb include/linux/skbuff.h:1011 [inline] __ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450 ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619 rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2116 __sys_sendmsg+0x11d/0x280 net/socket.c:2154 __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg net/socket.c:2161 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices' Freed by task 1304: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 skb_free_head+0x93/0xb0 net/core/skbuff.c:553 pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498 __pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896 pskb_may_pull include/linux/skbuff.h:2188 [inline] _decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272 kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env __xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322 __xfrm_policy_check2 include/net/xfrm.h:1170 [inline] xfrm_policy_check include/net/xfrm.h:1175 [inline] xfrm6_policy_check include/net/xfrm.h:1185 [inline] vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083 process_backlog+0x24e/0x7a0 net/core/dev.c:5923 kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0' napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412 __do_softirq+0x308/0xb7e kernel/softirq.c:292 The buggy address belongs to the object at ffff888191b8cac0 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 176 bytes inside of 512-byte region [ffff888191b8cac0, ffff888191b8ccc0) The buggy address belongs to the page: page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940 raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>' Memory state around the buggy address: ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-18ip6_tunnel: Fix encapsulation layoutStefano Brivio1-5/+5
Commit 058214a4d1df ("ip6_tun: Add infrastructure for doing encapsulation") added the ip6_tnl_encap() call in ip6_tnl_xmit(), before the call to ipv6_push_frag_opts() to append the IPv6 Tunnel Encapsulation Limit option (option 4, RFC 2473, par. 5.1) to the outer IPv6 header. As long as the option didn't actually end up in generated packets, this wasn't an issue. Then commit 89a23c8b528b ("ip6_tunnel: Fix missing tunnel encapsulation limit option") fixed sending of this option, and the resulting layout, e.g. for FoU, is: .-------------------.------------.----------.-------------------.----- - - | Outer IPv6 Header | UDP header | Option 4 | Inner IPv6 Header | Payload '-------------------'------------'----------'-------------------'----- - - Needless to say, FoU and GUE (at least) won't work over IPv6. The option is appended by default, and I couldn't find a way to disable it with the current iproute2. Turn this into a more reasonable: .-------------------.----------.------------.-------------------.----- - - | Outer IPv6 Header | Option 4 | UDP header | Inner IPv6 Header | Payload '-------------------'----------'------------'-------------------'----- - - With this, and with 84dad55951b0 ("udp6: fix encap return code for resubmitting"), FoU and GUE work again over IPv6. Fixes: 058214a4d1df ("ip6_tun: Add infrastructure for doing encapsulation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19ip6_tunnel: be careful when accessing the inner headerPaolo Abeni1-2/+11
the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03ip6_tunnel: respect ttl inherit for ip6tnlHangbin Liu1-1/+9
man ip-tunnel ttl section says: 0 is a special value meaning that packets inherit the TTL value. IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not implement it yet. To make IPv6 behave consistently with IP tunnel, add ipv6 tunnel inherit support. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+2
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst adding some tracepoints. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07ip6_tunnel: collect_md xmit: Use ip_tunnel_key's provided src addressShmulik Ladkani1-1/+3
When using an ip6tnl device in collect_md mode, the xmit methods ignore the ipv6.src field present in skb_tunnel_info's key, both for route calculation purposes (flowi6 construction) and for assigning the packet's final ipv6h->saddr. This makes it impossible specifying a desired ipv6 local address in the encapsulating header (for example, when using tc action tunnel_key). This is also not aligned with behavior of ipip (ipv4) in collect_md mode, where the key->u.ipv4.src gets used. Fix, by assigning fl6.saddr with given key->u.ipv6.src. In case ipv6.src is not specified, ip6_tnl_xmit uses existing saddr selection code. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmitXin Long1-6/+2
According to RFC791, 68 bytes is the minimum size of IPv4 datagram every device must be able to forward without further fragmentation while 576 bytes is the minimum size of IPv4 datagram every device has to be able to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right value for the ipv4 min mtu check in ip6_tnl_xmit. While at it, change to use max() instead of if statement. Fixes: c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01ip6_tunnel: remove magic mtu value 0xFFF8Nicolas Dichtel1-3/+8
I don't know where this value comes from (probably a copy and paste and paste and paste ...). Let's use standard values which are a bit greater. Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05ip6_tunnel: better validate user provided tunnel namesEric Dumazet1-4/+7
Use valid_name() to make sure user does not provide illegal device name. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai1-1/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/ipv6: Change address check to always take a device argumentDavid Ahern1-4/+8
ipv6_chk_addr_and_flags determines if an address is a local address and optionally if it is an address on a specific device. For example, it is called by ip6_route_info_create to determine if a given gateway address is a local address. The address check currently does not consider L3 domains and as a result does not allow a route to be added in one VRF if the nexthop points to an address in a second VRF. e.g., $ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23 Error: Invalid gateway address. where 2001:db8:102::23 is an address on an interface in vrf r1. ipv6_chk_addr_and_flags needs to allow callers to always pass in a device with a separate argument to not limit the address to the specific device. The device is used used to determine the L3 domain of interest. To that end add an argument to skip the device check and update callers to always pass a device where possible and use the new argument to mean any address in the domain. Update a handful of users of ipv6_chk_addr with a NULL dev argument. This patch handles the change to these callers without adding the domain check. ip6_validate_gw needs to handle 2 cases - one where the device is given as part of the nexthop spec and the other where the device is resolved. There is at least 1 VRF case where deferring the check to only after the route lookup has resolved the device fails with an unintuitive error "RTNETLINK answers: No route to host" as opposed to the preferred "Error: Gateway can not be a local address." The 'no route to host' error is because of the fallback to a full lookup. The check is done twice to avoid this error. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09net: do not create fallback tunnels for non-default namespacesEric Dumazet1-0/+2
fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+8
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net/ipv6: Pass skb to route lookupDavid Ahern1-2/+2
IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27ip6_tunnel: fix IFLA_MTU ignored on NEWLINKXin Long1-4/+8
Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for ip6_tunnel. Note that dev->hard_header_len setting for ip6_tunnel works fine, no need to fix it. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert ip6_tnl_net_opsKirill Tkhai1-0/+1
These pernet_operations are similar to ip6gre_net_ops. Exit method unregisters all net ip6_tnl tunnels, and it looks like another pernet_operations are not interested in foreign net tunnels list. So, it's possible to mark them async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25net: don't call update_pmtu unconditionallyNicolas Dichtel1-4/+2
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+8
2018-01-02ip6_tunnel: allow ip6gre dev mtu to be set below 1280Xin Long1-3/+3
Commit 582442d6d5bc ("ipv6: Allow the MTU of ipip6 tunnel to be set below 1280") fixed a mtu setting issue. It works for ipip6 tunnel. But ip6gre dev updates the mtu also with ip6_tnl_change_mtu. Since the inner packet over ip6gre can be ipv4 and it's mtu should also be allowed to set below 1280, the same issue also exists on ip6gre. This patch is to fix it by simply changing to check if parms.proto is IPPROTO_IPV6 in ip6_tnl_change_mtu instead, to make ip6gre to go to 'else' branch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02ip6_tunnel: disable dst caching if tunnel is dual-stackEli Cooper1-4/+5
When an ip6_tunnel is in mode 'any', where the transport layer protocol can be either 4 or 41, dst_cache must be disabled. This is because xfrm policies might apply to only one of the two protocols. Caching dst would cause xfrm policies for one protocol incorrectly used for the other. Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+7
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19ip6_tunnel: get the min mtu properly in ip6_tnl_xmitXin Long1-2/+7
Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflict was two parallel additions of include files to sch_generic.c, no biggie. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07adding missing rcu_read_unlock in ipxip6_rcvNikita V. Shirokov1-1/+1
commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04ip6_gre: add ip6 gre and gretap collect_md modeWilliam Tu1-1/+4
Similar to gre, vxlan, geneve, ipip tunnels, allow ip6 gre and gretap tunnels to operate in collect metadata mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. OVS can use it as well in the future. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-47/+42
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-13ip6_tunnel: clean up ip4ip6 and ip6ip6's err_handlersXin Long1-28/+14
This patch is to remove some useless codes of redirect and fix some indents on ip4ip6 and ip6ip6's err_handlers. Note that redirect icmp packet is already processed in ip6_tnl_err, the old redirect codes in ip4ip6_err actually never worked even before this patch. Besides, there's no need to send redirect to user's sk, it's for lower dst, so just remove it in this patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13ip6_tunnel: process toobig in a better wayXin Long1-4/+3
The same improvement in "ip6_gre: process toobig in a better way" is needed by ip4ip6 and ip6ip6 as well. Note that ip4ip6 and ip6ip6 will also update sk dst pmtu in their err_handlers. Like I said before, gre6 could not do this as it's inner proto is not certain. But for all of them, sk dst pmtu will be updated in tx path if in need. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13ip6_tunnel: add the process for redirect in ip6_tnl_errXin Long1-5/+10
The same process for redirect in "ip6_gre: add the process for redirect in ip6gre_err" is needed by ip4ip6 and ip6ip6 as well. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-4/+4
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25ip6_tunnel: Allow rcv/xmit even if remote address is a local addressShmulik Ladkani1-2/+4
Currently, ip6_tnl_xmit_ctl drops tunneled packets if the remote address (outer v6 destination) is one of host's locally configured addresses. Same applies to ip6_tnl_rcv_ctl: it drops packets if the remote address (outer v6 source) is a local address. This prevents using ipxip6 (and ip6_gre) tunnels whose local/remote endpoints are on same host; OTOH v4 tunnels (ipip or gre) allow such configurations. An example where this proves useful is a system where entities are identified by their unique v6 addresses, and use tunnels to encapsulate traffic between them. The limitation prevents placing several entities on same host. Introduce IP6_TNL_F_ALLOW_LOCAL_REMOTE which allows to bypass this restriction. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18ipv6: mark expected switch fall-throughsGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in some cases I placed the "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
Just simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ip6_tunnel: update mtu properly for ARPHRD_ETHER tunnel device in tx pathXin Long1-2/+3
Now when updating mtu in tx path, it doesn't consider ARPHRD_ETHER tunnel device, like ip6gre_tap tunnel, for which it should also subtract ether header to get the correct mtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
2017-09-19ipv6: speedup ipv6 tunnels dismantleEric Dumazet1-9/+11
Implement exit_batch() method to dismantle more devices per round. (rtnl_lock() ... unregister_netdevice_many() ... rtnl_unlock()) Tested: $ cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait ; grep net_namespace /proc/slabinfo Before patch : $ time ./add_del_unshare.sh net_namespace 110 267 5504 1 2 : tunables 8 4 0 : slabdata 110 267 0 real 3m25.292s user 0m0.644s sys 0m40.153s After patch: $ time ./add_del_unshare.sh net_namespace 126 282 5504 1 2 : tunables 8 4 0 : slabdata 126 282 0 real 1m38.965s user 0m0.688s sys 0m37.017s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18ip6_tunnel: do not allow loading ip6_tunnel if ipv6 is disabled in cmdlineXin Long1-0/+3
If ipv6 has been disabled from cmdline since kernel started, it makes no sense to allow users to create any ip6 tunnel. Otherwise, it could some potential problem. Jianlin found a kernel crash caused by this in ip6_gre when he set ipv6.disable=1 in grub: [ 209.588865] Unable to handle kernel paging request for data at address 0x00000080 [ 209.588872] Faulting instruction address: 0xc000000000a3aa6c [ 209.588879] Oops: Kernel access of bad area, sig: 11 [#1] [ 209.589062] NIP [c000000000a3aa6c] fib_rules_lookup+0x4c/0x260 [ 209.589071] LR [c000000000b9ad90] fib6_rule_lookup+0x50/0xb0 [ 209.589076] Call Trace: [ 209.589097] fib6_rule_lookup+0x50/0xb0 [ 209.589106] rt6_lookup+0xc4/0x110 [ 209.589116] ip6gre_tnl_link_config+0x214/0x2f0 [ip6_gre] [ 209.589125] ip6gre_newlink+0x138/0x3a0 [ip6_gre] [ 209.589134] rtnl_newlink+0x798/0xb80 [ 209.589142] rtnetlink_rcv_msg+0xec/0x390 [ 209.589151] netlink_rcv_skb+0x138/0x150 [ 209.589159] rtnetlink_rcv+0x48/0x70 [ 209.589169] netlink_unicast+0x538/0x640 [ 209.589175] netlink_sendmsg+0x40c/0x480 [ 209.589184] ___sys_sendmsg+0x384/0x4e0 [ 209.589194] SyS_sendmsg+0xd4/0x140 [ 209.589201] SyS_socketcall+0x3e0/0x4f0 [ 209.589209] system_call+0x38/0xe0 This patch is to return -EOPNOTSUPP in ip6_tunnel_init if ipv6 has been disabled from cmdline. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12ip6_tunnel: fix ip6 tunnel lookup in collect_md modeHaishuang Yan1-1/+1
In collect_md mode, if the tun dev is down, it still can call __ip6_tnl_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08ip6_tunnel: fix setting hop_limit value for ipv6 tunnelHaishuang Yan1-0/+1
Similar to vxlan/geneve tunnel, if hop_limit is zero, it should fall back to ip6_dst_hoplimt(). Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.changelinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18ip6_tunnel: Correct tos value in collect_md modeHaishuang Yan1-2/+2
Same as ip_gre, geneve and vxlan, use key->tos as traffic class value. CC: Peter Dawson <petedaws@gmail.com> Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets”) Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16ip6_tunnel: fix potential issue in __ip6_tnl_rcvHaishuang Yan1-0/+2
When __ip6_tnl_rcv fails, the tun_dst won't be freed, so call dst_release to free it in error code path. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") CC: Alexei Starovoitov <ast@fb.com> Tested-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-4/+4
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04ip6_tunnel: fix traffic class routing for tunnelsLiam McBirnie1-0/+3
ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by: Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packetsPeter Dawson1-8/+13
This fix addresses two problems in the way the DSCP field is formulated on the encapsulating header of IPv6 tunnels. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661 1) The IPv6 tunneling code was manipulating the DSCP field of the encapsulating packet using the 32b flowlabel. Since the flowlabel is only the lower 20b it was incorrect to assume that the upper 12b containing the DSCP and ECN fields would remain intact when formulating the encapsulating header. This fix handles the 'inherit' and 'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable. 2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was incorrect and resulted in the DSCP value always being set to 0. Commit 90427ef5d2a4 ("ipv6: fix flow labels when the traffic class is non-0") caused the regression by masking out the flowlabel which exposed the incorrect handling of the DSCP portion of the flowlabel in ip6_tunnel and ip6_gre. Fixes: 90427ef5d2a4 ("ipv6: fix flow labels when the traffic class is non-0") Signed-off-by: Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 23:34:33 +0000