summaryrefslogtreecommitdiffstats
path: root/net/dccp/ccids
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner4-20/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 132Thomas Gleixner4-56/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100843.499675784@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner2-28/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-07dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()Alexey Kodanev1-2/+4
The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value can lead to undefined behavior [1]. In order to fix this use a gradual shift of the window with a 'while' loop, similar to what tcp_cwnd_restart() is doing. When comparing delta and RTO there is a minor difference between TCP and DCCP, the last one also invokes dccp_cwnd_restart() and reduces 'cwnd' if delta equals RTO. That case is preserved in this change. [1]: [40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7 [40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int' [40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G W E 4.18.0-rc7.x86_64 #1 ... [40851.377176] Call Trace: [40851.408503] dump_stack+0xf1/0x17b [40851.451331] ? show_regs_print_info+0x5/0x5 [40851.503555] ubsan_epilogue+0x9/0x7c [40851.548363] __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4 [40851.617109] ? __ubsan_handle_load_invalid_value+0x18f/0x18f [40851.686796] ? xfrm4_output_finish+0x80/0x80 [40851.739827] ? lock_downgrade+0x6d0/0x6d0 [40851.789744] ? xfrm4_prepare_output+0x160/0x160 [40851.845912] ? ip_queue_xmit+0x810/0x1db0 [40851.895845] ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40851.963530] ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40852.029063] dccp_xmit_packet+0x1d3/0x720 [dccp] [40852.086254] dccp_write_xmit+0x116/0x1d0 [dccp] [40852.142412] dccp_sendmsg+0x428/0xb20 [dccp] [40852.195454] ? inet_dccp_listen+0x200/0x200 [dccp] [40852.254833] ? sched_clock+0x5/0x10 [40852.298508] ? sched_clock+0x5/0x10 [40852.342194] ? inet_create+0xdf0/0xdf0 [40852.388988] sock_sendmsg+0xd9/0x160 ... Fixes: 113ced1f52e5 ("dccp ccid-2: Perform congestion-window validation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: dccp: switch rx_tstamp_last_feedback to monotonic clockEric Dumazet1-4/+7
To compute delays, better not use time of the day which can be changed by admins or malicious programs. Also change ccid3_first_li() to use s64 type for delta variable to avoid potential overflows. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: dccp: avoid crash in ccid3_hc_rx_send_feedback()Eric Dumazet1-3/+2
On fast hosts or malicious bots, we trigger a DCCP_BUG() which seems excessive. syzbot reported : BUG: delta (-6195) <= 0 at net/dccp/ccids/ccid3.c:628/ccid3_hc_rx_send_feedback() CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.18.0-rc1+ #112 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 ccid3_hc_rx_send_feedback net/dccp/ccids/ccid3.c:628 [inline] ccid3_hc_rx_packet_recv.cold.16+0x38/0x71 net/dccp/ccids/ccid3.c:793 ccid_hc_rx_packet_recv net/dccp/ccid.h:185 [inline] dccp_deliver_input_to_ccids+0xf0/0x280 net/dccp/input.c:180 dccp_rcv_established+0x87/0xb0 net/dccp/input.c:378 dccp_v4_do_rcv+0x153/0x180 net/dccp/ipv4.c:654 sk_backlog_rcv include/net/sock.h:914 [inline] __sk_receive_skb+0x3ba/0xd80 net/core/sock.c:517 dccp_v4_rcv+0x10f9/0x1f58 net/dccp/ipv4.c:875 ip_local_deliver_finish+0x2eb/0xda0 net/ipv4/ip_input.c:215 NF_HOOK include/linux/netfilter.h:287 [inline] ip_local_deliver+0x1e9/0x750 net/ipv4/ip_input.c:256 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x823/0x2220 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:287 [inline] ip_rcv+0xa18/0x1284 net/ipv4/ip_input.c:492 __netif_receive_skb_core+0x2488/0x3680 net/core/dev.c:4628 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 process_backlog+0x219/0x760 net/core/dev.c:5373 napi_poll net/core/dev.c:5771 [inline] net_rx_action+0x7da/0x1980 net/core/dev.c:5837 __do_softirq+0x2e8/0xb17 kernel/softirq.c:284 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-03dccp: fix tasklet usageEric Dumazet1-2/+12
syzbot reported a crash in tasklet_action_common() caused by dccp. dccp needs to make sure socket wont disappear before tasklet handler has completed. This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet() kernel BUG at kernel/softirq.c:514! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ #30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246 dccp_close: ABORT with 65423 bytes unread RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000 RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94 dccp_close: ABORT with 65423 bytes unread R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000 R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490 FS: 0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tasklet_action+0x1d/0x20 kernel/softirq.c:533 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 dccp_close: ABORT with 65423 bytes unread run_ksoftirqd+0x86/0x100 kernel/softirq.c:646 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8 RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8 Fixes: dc841e30eaea ("dccp: Extend CCID packet dequeueing interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed stateAlexey Kodanev1-0/+3
ccid2_hc_tx_rto_expire() timer callback always restarts the timer again and can run indefinitely (unless it is stopped outside), and after commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"), which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from dccp_destroy_sock() to sk_destruct(), this started to happen quite often. The timer prevents releasing the socket, as a result, sk_destruct() won't be called. Found with LTP/dccp_ipsec tests running on the bonding device, which later couldn't be unloaded after the tests were completed: unregister_netdevice: waiting for bond0 to become free. Usage count = 148 Fixes: 2a91aa396739 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01net: dccp: ccids: lib: packet_history: use swap macro in tfrc_rx_hist_swapGustavo A. R. Silva1-3/+1
Make use of the swap macro and remove unnecessary variable tmp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25net: dccp: Convert timers to use timer_setup()Kees Cook4-10/+13
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Adds a pointer back to the sock. Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <edumazet@google.com> Cc: dccp@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17dccp: do not use tcp_time_stampEric Dumazet2-5/+5
Use our own macro instead of abusing tcp_time_stamp Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13dccp: fix memory leak during tear-down of unsuccessful connection requestHannes Frederic Sowa1-0/+1
This patch fixes a memory leak, which happens if the connection request is not fulfilled between parsing the DCCP options and handling the SYN (because e.g. the backlog is full), because we forgot to free the list of ack vectors. Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16dccp: re-enable debug macroGerrit Renker2-1/+2
dccp tfrc: revert This reverts 6aee49c558de ("dccp: make local variable static") since the variable tfrc_debug is referenced by the tfrc_pr_debug(fmt, ...) macro when TFRC debugging is enabled. If it is enabled, use of the macro produces a compilation error. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04dccp: make local variable staticstephen hemminger2-2/+1
Make DCCP module config variable static, only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19net: dccp: Remove extern from function prototypesJoe Perches3-29/+26
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11net/dccp/ccids: remove depends on CONFIG_EXPERIMENTALKees Cook1-3/+2
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Gerrit Renker <gerrit@erg.abdn.ac.uk> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2012-08-15dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO)Mathias Krause1-0/+1
The CCID3 code fails to initialize the trailing padding bytes of struct tfrc_tx_info added for alignment on 64 bit architectures. It that for potentially leaks four bytes kernel stack via the getsockopt() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings4-3/+11
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-6/+6
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-03dccp ccid-3: replace incorrect BUG_ONGerrit Renker1-2/+1
This replaces an unjustified BUG_ON(), which could get triggered under normal conditions: X_calc can be 0 when p > 0. X would in this case be set to the minimum, s/t_mbi. Its replacement avoids t_ipi = 0 (unbounded sending rate). Thanks to Jordi, Victor and Xavier who reported this. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.uk>
2011-12-19module_param: make bool parameters really bool (net & drivers/net)Rusty Russell4-5/+5
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: add moduleparam.h for users of module_param/MODULE_PARM_DESCPaul Gortmaker1-0/+1
These files were getting access to these two via the implicit presence of module.h everywhere. They aren't modules, so they don't need the full module.h inclusion though. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-01dccp ccid-2: check Ack Ratio when reducing cwndSamuel Jero1-3/+23
This patch causes CCID-2 to check the Ack Ratio after reducing the congestion window. If the Ack Ratio is greater than the congestion window, it is reduced. This prevents timeouts caused by an Ack Ratio larger than the congestion window. In this situation, we choose to set the Ack Ratio to half the congestion window (or one if that's zero) so that if we loose one ack we don't trigger a timeout. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-08-01dccp ccid-2: increment cwnd correctlySamuel Jero1-1/+1
This patch fixes an issue where CCID-2 will not increase the congestion window for numerous RTTs after an idle period, application-limited period, or a loss once the algorithm is in Congestion Avoidance. What happens is that, when CCID-2 is in Congestion Avoidance mode, it will increase hc->tx_packets_acked by one for every packet and will increment cwnd every cwnd packets. However, if there is now an idle period in the connection, cwnd will be reduced, possibly below the slow start threshold. This will cause the connection to go into Slow Start. However, in Slow Start CCID-2 performs this test to increment cwnd every second ack: ++hc->tx_packets_acked == 2 Unfortunately, this will be incorrect, if cwnd previous to the idle period was larger than 2 and if tx_packets_acked was close to cwnd. For example: cwnd=50 and tx_packets_acked=45. In this case, the current code, will increment tx_packets_acked until it equals two, which will only be once tx_packets_acked (an unsigned 32-bit integer) overflows. My fix is simply to change that test for tx_packets_acked greater than or equal to two in slow start. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-08-01dccp ccid-2: prevent cwnd > Sequence WindowSamuel Jero2-15/+41
Add a check to prevent CCID-2 from increasing the cwnd greater than the Sequence Window. When the congestion window becomes bigger than the Sequence Window, CCID-2 will attempt to keep more data in the network than the DCCP Sequence Window code considers possible. This results in the Sequence Window code issuing a Sync, thereby inducing needless overhead. Further, if this occurs at the sender, CCID-2 will never detect the problem because the Acks it receives will indicate no losses. I have seen this cause a drop of 1/3rd in throughput for a connection. Also add code to adjust the Sequence Window to be about 5 times the number of packets in the network (RFC 4340, 7.5.2) and to adjust the Ack Ratio so that the remote Sequence Window will hold about 5 times the number of packets in the network. This allows the congestion window to increase correctly without being limited by the Sequence Window. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-08-01dccp ccid-2: use feature-negotiation to report Ack Ratio changesGerrit Renker1-1/+9
This uses the new feature-negotiation framework to signal Ack Ratio changes, as required by RFC 4341, sec. 6.1.2. That raises some problems with CCID-2, which at the moment can not cope gracefully with Ack Ratios > 1. Since these issues are not directly related to feature negotiation, they are marked by a FIXME. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Samuel Jero <sj323707@ohio.edu> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.uk>
2011-07-04dccp ccid-2: Perform congestion-window validationGerrit Renker2-3/+91
CCID-2's cwnd increases like TCP during slow-start, which has implications for * the local Sequence Window value (should be > cwnd), * the Ack Ratio value. Hence an exponential growth, if it does not reflect the actual network conditions, can quickly lead to instability. This patch adds congestion-window validation (RFC2861) to CCID-2: * cwnd is constrained if the sender is application limited; * cwnd is reduced after a long idle period, as suggested in the '90 paper by Van Jacobson, in RFC 2581 (sec. 4.1); * cwnd is never reduced below the RFC 3390 initial window. As marked in the comments, the code is actually almost a direct copy of the TCP congestion-window-validation algorithms. By continuing this work, it may in future be possible to use the TCP code (not possible at the moment). The mechanism can be turned off using a module parameter. Sampling of the currently-used window (moving-maximum) is however done constantly; this is used to determine the expected window, which can be exploited to regulate DCCP's Sequence Window value. This patch also sets slow-start-after-idle (RFC 4341, 5.1), i.e. it behaves like TCP when net.ipv4.tcp_slow_start_after_idle = 1. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-07-04dccp ccid-2: Use existing function to test for data packetsGerrit Renker2-11/+11
This replaces a switch statement with a test, using the equivalent function dccp_data_packet(skb). It also doubles the range of the field `rx_num_data_pkts' by changing the type from `int' to `u32', avoiding signed/unsigned comparison with the u16 field `dccps_r_ack_ratio'. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-07-04dccp ccid-2: move rfc 3390 function into header fileGerrit Renker2-9/+9
This moves CCID-2's initial window function into the header file, since several parts throughout the CCID-2 code need to call it (CCID-2 still uses RFC 3390). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Leandro Melo de Sales <leandro@ic.ufal.br>
2011-02-02tcp: Increase the initial congestion window to 10.David S. Miller1-0/+9
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Nandita Dukkipati <nanditad@google.com>
2010-11-15dccp ccid-2: Separate option parsing from CCID processingGerrit Renker2-93/+43
This patch replaces an almost identical replication of code: large parts of dccp_parse_options() re-appeared as ccid2_ackvector() in ccid2.c. Apart from the duplication, this caused two more problems: 1. CCIDs should not need to be concerned with parsing header options; 2. one can not assume that Ack Vectors appear as a contiguous area within an skb, it is legal to insert other options and/or padding in between. The current code would throw an error and stop reading in such a case. Since Ack Vectors provide CCID-specific information, they are now processed by the CCID directly, separating this functionality from the main DCCP code. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-11-10dccp ccid-2: Ack Vector interface clean-upGerrit Renker1-8/+5
This patch brings the Ack Vector interface up to date. Its main purpose is to lay the basis for the subsequent patches of this set, which will use the new data structure fields and routines. There are no real algorithmic changes, rather an adaptation: (1) Replaced the static Ack Vector size (2) with a #define so that it can be adapted (with low loss / Ack Ratio, a value of 1 works, so 2 seems to be sufficient for the moment) and added a solution so that computing the ECN nonce will continue to work - even with larger Ack Vectors. (2) Replaced the #defines for Ack Vector states with a complete enum. (3) Replaced #defines to compute Ack Vector length and state with general purpose routines (inlines), and updated code to use these. (4) Added a `tail' field (conversion to circular buffer in subsequent patch). (5) Updated the (outdated) documentation for Ack Vector struct. (6) All sequence number containers now trimmed to 48 bits. (7) Removal of unused bits: * removed dccpav_ack_nonce from struct dccp_ackvec, since this is already redundantly stored in the `dccpavr_ack_nonce' (of Ack Vector record); * removed Elapsed Time for Ack Vectors (it was nowhere used); * replaced semantics of dccpavr_sent_len with dccpavr_ack_runlen, since the code needs to be able to remember the old run length; * reduced the de-/allocation routines (redundant / duplicate tests). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-10-28dccp ccid-2: Stop pollingGerrit Renker2-8/+20
This updates CCID-2 to use the CCID dequeuing mechanism, converting from previous continuous-polling to a now event-driven mechanism. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28dccp: Return-value convention of hc_tx_send_packet()Gerrit Renker1-6/+6
This patch reorganises the return value convention of the CCID TX sending function, to permit more flexible schemes, as required by subsequent patches. Currently the convention is * values < 0 mean error, * a value == 0 means "send now", and * a value x > 0 means "send in x milliseconds". The patch provides symbolic constants and a function to interpret return values. In addition, it caps the maximum positive return value to 0xFFFF milliseconds, corresponding to 65.535 seconds. This is possible since in CCID-3/4 the maximum possible inter-packet gap is fixed at t_mbi = 64 sec. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-12dccp: remove unused argument in CCID tx functionGerrit Renker2-3/+2
This removes the argument `more' from ccid_hc_tx_packet_sent, since it was nowhere used in the entire code. (Btw, this argument was not even used in the original KAME code where the function initially came from; compare the variable moreToSend in the freebsd61-dccp-kame-28.08.2006.patch kept by Emmanuel Lochin.) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-23net: return operator cleanupEric Dumazet1-1/+1
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21dccp ccid-3: Remove redundant 'options_received' structGerrit Renker2-23/+8
The `options_received' struct is redundant, since it re-duplicates the existing `p' and `x_recv' fields. This patch removes the sub-struct and migrates the format conversion operations to ccid3_hc_tx_parse_options(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-21dccp tfrc/ccid-3: computing the loss rate from the Loss Event RateGerrit Renker3-5/+19
This adds a function to take care of the following, separate cases occurring in the computation of the Loss Rate p: * 1/(2^32-1) is mapped into 0% as per RFC 4342, 8.5; * 1/0 is mapped into 100%, the maximum; * to avoid that p = 1/x is rounded down to 0 when x is very large, since this means accidentally re-entering slow-start indicated by p == 0, the minimum resolution value of p is now returned instead; * a bug in ccid3_hc_rx_getsockopt is fixed: 1/0 was mapped into ~0U. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-21dccp ccid-3: remove dead statesGerrit Renker2-30/+9
This patch is thanks to an investigation by Leandro Sales de Melo and his colleagues. They worked out two state diagrams which highlight the fact that the xxx_TERM states in CCID-3/4 are in fact not necessary. And this can be confirmed by in turn looking at the code: the xxx_TERM states are only ever set in ccid3_hc_{rx,tx}_exit(): when CCID-3 sets the state to xxx_TERM, it is at a time where no more processing should be going on, hence it is not necessary to introduce a dedicated exit state - this is already implied by unloading the CCID. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-21dccp: Add packet type information to CCID-specific option parsingGerrit Renker1-6/+8
This 1. adds packet type information to ccid_hc_{rx,tx}_parse_options(). This is necessary, since table 3 in RFC 4340, 5.8 leaves it to the CCIDs to state which options may (not) appear on what packet type. 2. adds such a check for CCID-3's {Loss Event, Receive} Rate as specified in RFC 4340 8.3 ("Receive Rate options MUST NOT be sent on DCCP-Data packets") and 8.5 ("Loss Event Rate options MUST NOT be sent on DCCP-Data packets"). 3. removes an unused argument `idx' from ccid_hc_{rx,tx}_parse_options(). This is also no longer necessary, since the CCID-specific option-parsing routines are passed every single parameter of the type-length-value option encoding. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15dccp ccid-3: Simplify and consolidate tx_parse_optionsGerrit Renker2-46/+14
This simplifies and consolidates the TX option-parsing code: 1. The Loss Intervals option is not currently used, so dead code related to this option is removed. I am aware of no plans to support the option, but if someone wants to implement it (e.g. for inter-op tests), it is better to start afresh than having to also update currently unused code. 2. The Loss Event and Receive Rate options have a lot of code in common (both are 32 bit, both have same length etc.), so this is consolidated. 3. The test against GSR is not necessary, because - on first loading CCID3, ccid_new() zeroes out all fields in the socket; - ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to pinv = opt_recv->ccid3or_loss_event_rate; if (pinv == ~0U || pinv == 0) hctx->p = 0; - as a result, the sequence number field is removed from opt_recv. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15dccp ccid-3: remove buggy RTT-sampling history lookupGerrit Renker3-57/+38
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since 1. it suffered from complex passing of return values (the return value both indicated successful lookup while the value doubled as RTT sample); 2. when for some odd reason the sample value equalled 0, this triggered a bug warning about "bogus Ack", due to the ambiguity of the return value; 3. on a passive host which has not sent anything the TX history is empty and thus will lead to unwanted "bogus Ack" warnings such as ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148 ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606. The fix is to replace the implicit encoding by performing the steps manually. Furthermore, the "bogus Ack" warning has been removed, since it can actually be triggered due to several reasons (network reordering, old packet, (3) above), hence it is not very useful. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15dccp ccid-3: A lower bound for the inter-packet scheduling algorithmGerrit Renker2-16/+21
This fixes a subtle bug in the calculation of the inter-packet gap and shows that t_delta, as it is currently used, is not needed. The algorithm from RFC 5348, 8.3 below continually computes a send time t_nom, which is initialised with the current time t_now; t_gran = 1E6 / HZ specifies the scheduling granularity, s the packet size, and X the sending rate: t_distance = t_nom - t_now; // in microseconds t_delta = min(t_ipi, t_gran) / 2; // `delta' parameter in microseconds if (t_distance >= t_delta) { reschedule after (t_distance / 1000) milliseconds; } else { t_ipi = s / X; // inter-packet interval in usec t_nom += t_ipi; // compute the next send time send packet now; } Problem: -------- Rescheduling requires a conversion into milliseconds (sk_reset_timer()). The highest jiffy resolution with HZ=1000 is 1 millisecond, so using a higher granularity does not make much sense here. As a consequence, values of t_distance < 1000 are truncated to 0. This issue has so far been resolved by using instead if (t_distance >= t_delta + 1000) reschedule after (t_distance / 1000) milliseconds; This is unnecessarily large, a lower bound is t_delta' = max(t_delta, 1000). And it implies a further simplification: a) when HZ >= 500, then t_delta <= t_gran/2 = 10^6/(2*HZ) <= 1000, so that t_delta' = MAX(1000, t_delta) = 1000 (constant value); b) when HZ < 500, then t_delta = 1/2*MIN(rtt, t_ipi, t_gran) <= t_gran/2, so that 1000 <= t_delta' <= t_gran/2. The maximum error of using a constant t_delta in (b) is less than half a jiffy. Fix: ---- The patch replaces t_delta with a constant, whose value depends on CONFIG_HZ, changing the above algorithm to: if (t_distance >= t_delta') reschedule after (t_distance / 1000) milliseconds; where t_delta' = 10^6/(2*HZ) if HZ < 500, and t_delta' = 1000 otherwise. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-08-30dccp ccid-3: use per-route RTO or TCP RTO as fallbackGerrit Renker3-38/+6
This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time RTO lower bound with a per-route tunable value. The original Kconfig option solved the problem that a very low RTT (in the order of HZ) can trigger too frequent and unnecessary reductions of the sending rate. This tunable does not affect the initial RTO value of 2 seconds specified in RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value, it allows to adapt to network conditions. The same effect as the original Kconfig option of 100ms is now achieved by > ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0 (assuming HZ=1000). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-2: Share TCP's minimum RTO codeGerrit Renker1-2/+3
Using a fixed RTO_MIN of 0.2 seconds was found to cause problems for CCID-2 over 802.11g: at least once per session there was a spurious timeout. It helped to then increase the the value of RTO_MIN over this link. Since the problem is the same as in TCP, this patch makes the solution from commit "05bb1fad1cde025a864a90cfeb98dcbefe78a44a" "[TCP]: Allow minimum RTO to be configurable via routing metrics." available to DCCP. This avoids reinventing the wheel, so that e.g. the following works in the expected way now also for CCID-2: > ip route change 10.0.0.2 rto_min 800 dev ath0 Luckily this useful rto_min function was recently moved to net/tcp.h, which simplifies sharing code originating from TCP. Documentation also updated (plus minor whitespace fixes). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30tcp/dccp: Consolidate common code for RFC 3390 conversionGerrit Renker1-6/+2
This patch consolidates initial-window code common to TCP and CCID-2: * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 10:52:07 +0000