summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2016-09-19Bluetooth: Add supported data types to ext info changed eventMichał Narajowski1-4/+10
This patch adds EIR data to extended info changed event. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add appearance to Read Ext Controller Info commandSzymon Janc1-0/+14
If LE is enabled appearance is added to EIR data. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Factor appending EIR to separate helperMichał Narajowski1-13/+22
This will also be used for Extended Information Event handling. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Refactor read_ext_controller_info handlerSzymon Janc1-20/+16
There is no need to allocate heap for reply only to copy stack data to it. This also fix rp memory leak and missing hdev unlock if kmalloc failed. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Increment management interface revisionSzymon Janc1-1/+1
Increment the mgmt revision due to the recently added Read Extended Controller Information and Set Appearance commands. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix advertising instance validity check for flagsSzymon Janc1-1/+2
Flags are not allowed in Scan Response. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Unify advertising instance flags checkSzymon Janc1-37/+48
This unifies max length and TLV validity checks. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove unused parameter from tlv_data_is_valid functionSzymon Janc1-4/+3
hdev parameter is not used in function. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for appearance in scan rspMichał Narajowski2-0/+45
This patch enables prepending appearance value to scan response data. It also adds support for setting appearance value through mgmt command. If currently advertised instance has apperance flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for local name in scan rspMichał Narajowski2-10/+64
This patch enables appending local name to scan response data. If currently advertised instance has name flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix not registering BR/EDR SMP channel with force_bredr flagSzymon Janc1-1/+4
If force_bredr is set SMP BR/EDR channel should also be for non-SC capable controllers. Since hcidev flag is persistent wrt power toggle it can be already set when calling smp_register(). This resulted in SMP BR/EDR channel not being registered even if HCI_FORCE_BREDR_SMP flag was set. This also fix NULL pointer dereference when trying to disable force_bredr after power cycle. BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 IP: [<ffffffffc0493ad8>] smp_del_chan+0x18/0x80 [bluetooth] Call Trace: [<ffffffffc04950ca>] force_bredr_smp_write+0xba/0x100 [bluetooth] [<ffffffff8133be14>] full_proxy_write+0x54/0x90 [<ffffffff81245967>] __vfs_write+0x37/0x160 [<ffffffff813617f7>] ? selinux_file_permission+0xd7/0x110 [<ffffffff81356fbd>] ? security_file_permission+0x3d/0xc0 [<ffffffff810eb5b2>] ? percpu_down_read+0x12/0x50 [<ffffffff812462a5>] vfs_write+0xb5/0x1a0 [<ffffffff812476f5>] SyS_write+0x55/0xc0 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4 Code: 48 8b 45 f0 eb c1 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 05 c6 3b 02 00 04 55 48 89 e5 41 54 53 49 89 fc 75 4b <49> 8b 9c 24 88 03 00 00 48 85 db 74 31 49 c7 84 24 88 03 00 00 RIP [<ffffffffc0493ad8>] smp_del_chan+0x18/0x80 [bluetooth] RSP <ffff8802aee3bd90> CR2: 0000000000000388 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Use kzalloc instead of kmalloc/memsetWei Yongjun1-3/+1
Use kzalloc rather than kmalloc followed by memset with 0. Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix reason code used for rejecting SCO connectionsFrédéric Dalleau1-1/+1
A comment in the code states that SCO connection should be rejected with the proper error value between 0xd-0xf. The code uses HCI_ERROR_REMOTE_LOW_RESOURCES which is 0x14. This led to following error: < HCI Command: Reject Synchronous Co.. (0x01|0x002a) plen 7 Address: 34:51:C9:EF:02:CA (Apple, Inc.) Reason: Remote Device Terminated due to Low Resources (0x14) > HCI Event: Command Status (0x0f) plen 4 Reject Synchronous Connection Request (0x01|0x002a) ncmd 1 Status: Invalid HCI Command Parameters (0x12) Instead make use of HCI_ERROR_REJ_LIMITED_RESOURCES which is 0xd. Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix wrong New Settings event when closing HCI User ChannelMarcel Holtmann1-0/+1
When closing HCI User Channel, the New Settings event was send out to inform about changed settings. However such event is wrong since the exclusive HCI User Channel access is active until the Index Added event has been sent. @ USER Close: test @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections = Close Index: 00:14:EF:22:04:12 @ MGMT Event: Index Added (0x0004) plen 0 Calling __mgmt_power_off from hci_dev_do_close requires an extra check for an active HCI User Channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close messages for HCI user channelsMarcel Holtmann1-0/+35
When opening and closing HCI user channel, send monitoring messages to be able to trace its behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Append local name and CoD to Extended Controller InfoMichał Narajowski1-21/+42
This adds device class, complete local name and short local name to EIR data in Extended Controller Info as specified in docs. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add framework for Extended Controller InformationMarcel Holtmann1-2/+60
This command is used to retrieve the current state and basic information of a controller. It is typically used right after getting the response to the Read Controller Index List command or an Index Added event (or its extended counterparts). When any of the values in the EIR_Data field changes, the event Extended Controller Information Changed will be used to inform clients about the updated information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
2016-09-19Bluetooth: Handle HCI raw socket transition from unbound to boundMarcel Holtmann1-17/+36
In case an unbound HCI raw socket is later on bound, ensure that the monitor notification messages indicate a close and re-open. None of the userspace tools use the socket this, but it is actually possible to use an ioctl on an unbound socket and then later bind it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close messages for HCI raw socketsMarcel Holtmann1-0/+48
When opening and closing HCI raw sockets their main usage is for legacy userspace. To track interaction with the modern mgmt interface, send open and close monitoring messages for these action. The HCI raw sockets is special since it supports unbound ioctl operation and for that special case delay the notification message until at least one ioctl has been executed. The difference between a bound and unbound socket will be detailed by the fact the HCI index is present or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add extra channel checks for control open/close messagesMarcel Holtmann1-5/+19
The control open and close monitoring events require special channel checks to ensure messages are only send when the right events happen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Assign the channel early when binding HCI socketsMarcel Holtmann1-5/+11
Assignment of the hci_pi(sk)->channel should be done early when binding the HCI socket. This avoids confusion with the RAW channel that is used for legacy access. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close only when cookie is presentMarcel Holtmann1-2/+16
Only when the cookie has been assigned, then send the open and close monitor messages. Also if the socket is bound to a device, then include the index into the message. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use numbers for subsystem version stringMarcel Holtmann2-5/+9
Instead of keeping a version string around, use version and revision numbers and then stringify them for use as module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper functions for socket cookie handlingMarcel Holtmann1-12/+29
Instead of manually allocating cookie information each time, use helper functions for generating and releasing cookies. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use command status event for Set IO Capability errorsMarcel Holtmann1-2/+2
In case of failure, the Set IO Capability command is suppose to return command status and not command complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Fix wrong Get Clock Information return parametersMarcel Holtmann1-1/+1
The address information of the Get Clock Information return parameters is copying from a different memory location. It uses &cmd->param while it actually needs to be cmd->param. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use individual flags for certain management eventsMarcel Holtmann2-20/+17
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: mgmt: Fix sending redundant event for Advertising InstanceJohan Hedberg3-10/+12
When an Advertising Instance is removed, the Advertising Removed event shouldn't be sent to the same socket that issued the Remove Advertising command (it gets a command complete event instead). The mgmt_advertising_removed() function already has a parameter for skipping a specific socket, but there was no code to propagate the right value to this parameter. This patch fixes the issue by making sure the intermediate hci_req_clear_adv_instance() function gets the socket pointer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for sending MGMT commands and events to monitorMarcel Holtmann2-3/+157
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add support for sending MGMT open and close to monitorMarcel Holtmann1-0/+95
This sends new notifications to the monitor support whenever a management channel has been opened or closed. This allows tracing of control channels really easily. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper to pack mgmt version informationMarcel Holtmann1-2/+9
The mgmt version information will be also needed for the control changell tracing feature. This provides a helper to pack them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Store control socket cookie and comm informationMarcel Holtmann1-1/+30
To further allow unique identification and tracking of control socket, store cookie and comm information when binding the socket. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Check SOL_HCI for raw socket optionsMarcel Holtmann1-0/+6
The SOL_HCI level should be enforced when using socket options on the HCI raw socket interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add combined LED trigger for controller powerMarcel Holtmann3-0/+42
Instead of just having a LED trigger for power on a specific controller, this adds the LED trigger "bluetooth-power" that combines the power states of all controllers into a single trigger. This simplifies the trigger selection and also supports multiple controllers per host system via a single LED. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-08-25Bluetooth: Fix hci_sock_recvmsg when MSG_TRUNC is not setLuiz Augusto von Dentz1-1/+1
Similar to bt_sock_recvmsg MSG_TRUNC shall be checked using the original flags not msg_flags. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-25Bluetooth: Fix bt_sock_recvmsg when MSG_TRUNC is not setLuiz Augusto von Dentz1-1/+1
Commit b5f34f9420b50c9b5876b9a2b68e96be6d629054 attempt to introduce proper handling for MSG_TRUNC but recv and variants should still work as read if no flag is passed, but because the code may set MSG_TRUNC to msg->msg_flags that shall not be used as it may cause it to be behave as if MSG_TRUNC is always, so instead of using it this changes the code to use the flags parameter which shall contain the original flags. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-24Bluetooth: split sk_filter in l2cap_sock_recv_cbDaniel Borkmann2-2/+20
During an audit for sk_filter(), we found that rx_busy_skb handling in l2cap_sock_recv_cb() and l2cap_sock_recvmsg() looks not quite as intended. The assumption from commit e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") is that errors returned from sock_queue_rcv_skb() are due to receive buffer shortage. However, nothing should prevent doing a setsockopt() with SO_ATTACH_FILTER on the socket, that could drop some of the incoming skbs when handled in sock_queue_rcv_skb(). In that case sock_queue_rcv_skb() will return with -EPERM, propagated from sk_filter() and if in L2CAP_MODE_ERTM mode, wrong assumption was that we failed due to receive buffer being full. From that point onwards, due to the to-be-dropped skb being held in rx_busy_skb, we cannot make any forward progress as rx_busy_skb is never cleared from l2cap_sock_recvmsg(), due to the filter drop verdict over and over coming from sk_filter(). Meanwhile, in l2cap_sock_recv_cb() all new incoming skbs are being dropped due to rx_busy_skb being occupied. Instead, just use __sock_queue_rcv_skb() where an error really tells that there's a receive buffer issue. Split the sk_filter() and enable it for non-segmented modes at queuing time since at this point in time the skb has already been through the ERTM state machine and it has been acked, so dropping is not allowed. Instead, for ERTM and streaming mode, call sk_filter() in l2cap_data_rcv() so the packet can be dropped before the state machine sees it. Fixes: e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-24Bluetooth: Fix memory leak at end of hci requestsFrederic Dalleau1-0/+2
In hci_req_sync_complete the event skb is referenced in hdev->req_skb. It is used (via hci_req_run_skb) from either __hci_cmd_sync_ev which will pass the skb to the caller, or __hci_req_sync which leaks. unreferenced object 0xffff880005339a00 (size 256): comm "kworker/u3:1", pid 1011, jiffies 4294671976 (age 107.389s) backtrace: [<ffffffff818d89d9>] kmemleak_alloc+0x49/0xa0 [<ffffffff8116bba8>] kmem_cache_alloc+0x128/0x180 [<ffffffff8167c1df>] skb_clone+0x4f/0xa0 [<ffffffff817aa351>] hci_event_packet+0xc1/0x3290 [<ffffffff8179a57b>] hci_rx_work+0x18b/0x360 [<ffffffff810692ea>] process_one_work+0x14a/0x440 [<ffffffff81069623>] worker_thread+0x43/0x4d0 [<ffffffff8106ead4>] kthread+0xc4/0xe0 [<ffffffff818dd38f>] ret_from_fork+0x1f/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-18Bluetooth: Add debugfs fields for hardware and firmware infoMarcel Holtmann2-0/+59
Some Bluetooth controllers allow for reading hardware and firmware related vendor specific infos. If they are available, then they can be exposed via debugfs now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-17Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTUAmadeusz Sławiński1-1/+1
When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-07-13Bluetooth: Increment management interface revisionJohan Hedberg1-1/+1
Increment the mgmt revision due to the recently added new reason code for the Disconnected event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-13Bluetooth: Add Authentication Failed reason to Disconnected Mgmt eventSzymon Janc1-1/+15
If link is disconnected due to Authentication Failure (PIN or Key Missing status) userspace will be notified about this with proper error code. Many LE profiles define "PIN or Key Missing" status as indication of remote lost bond so this allows userspace to take action on this. @ Device Connected: 88:63:DF:88:0E:83 (1) flags 0x0000 02 01 1a 05 03 0a 18 0d 18 0b 09 48 65 61 72 74 ...........Heart 20 52 61 74 65 Rate > HCI Event: Command Status (0x0f) plen 4 LE Read Remote Used Features (0x08|0x0016) ncmd 1 Status: Success (0x00) > ACL Data RX: Handle 3585 flags 0x02 dlen 11 ATT: Read By Group Type Request (0x10) len 6 Handle range: 0x0001-0xffff Attribute group type: Primary Service (0x2800) > HCI Event: LE Meta Event (0x3e) plen 12 LE Read Remote Used Features (0x04) Status: Success (0x00) Handle: 3585 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 26201cd479a0921b6f949f0b1fa8dc82 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Change (0x08) plen 4 Status: PIN or Key Missing (0x06) Handle: 3585 Encryption: Disabled (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 3585 Reason: Authentication Failure (0x05) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 3585 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: 88:63:DF:88:0E:83 (1) reason 4 @ Device Connected: C4:43:8F:A3:4D:83 (0) flags 0x0000 08 09 4e 65 78 75 73 20 35 ..Nexus 5 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: C4:43:8F:A3:4D:83 (LG Electronics) < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 Address: C4:43:8F:A3:4D:83 (LG Electronics) Link key: 080812e4aa97a863d11826f71f65a933 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 Status: Success (0x00) Address: C4:43:8F:A3:4D:83 (LG Electronics) > HCI Event: Auth Complete (0x06) plen 3 Status: PIN or Key Missing (0x06) Handle: 75 @ Authentication Failed: C4:43:8F:A3:4D:83 (0) status 0x05 < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 75 Reason: Remote User Terminated Connection (0x13) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 75 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: C4:43:8F:A3:4D:83 (0) reason 4 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann6-27/+25
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Remove controller device attributesMarcel Holtmann1-54/+0
The controller device attributes are not used and expose no valuable information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09Bluetooth: Remove connection link attributesMarcel Holtmann1-45/+0
The connection link attributes are not used and expose no valuable information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-08Bluetooth: Fix hci_sock_recvmsg return valueDenis Kenzior1-0/+5
If recvmsg is called with a destination buffer that is too small to receive the contents of skb in its entirety, the return value from recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM semantics. If destination buffer provided by userspace is too small (e.g. len < copied), then MSG_TRUNC flag is set and copied is returned. Instead, it should return the length of the message, which is consistent with how other datagram based sockets act. Quoting 'man recv': "All three calls return the length of the message on successful comple‐ tion. If a message is too long to fit in the supplied buffer, excess bytes may be discarded depending on the type of socket the message is received from." and "MSG_TRUNC (since Linux 2.2) For raw (AF_PACKET), Internet datagram (since Linux 2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram (since Linux 3.4) sockets: return the real length of the packet or datagram, even when it was longer than the passed buffer." Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: Fix bt_sock_recvmsg return valueDenis Kenzior1-0/+5
If recvmsg is called with a destination buffer that is too small to receive the contents of skb in its entirety, the return value from recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM semantics. If destination buffer provided by userspace is too small (e.g. len < copied), then MSG_TRUNC flag is set and copied is returned. Instead, it should return the length of the message, which is consistent with how other datagram based sockets act. Quoting 'man recv': "All three calls return the length of the message on successful comple‐ tion. If a message is too long to fit in the supplied buffer, excess bytes may be discarded depending on the type of socket the message is received from." and "MSG_TRUNC (since Linux 2.2) For raw (AF_PACKET), Internet datagram (since Linux 2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram (since Linux 3.4) sockets: return the real length of the packet or datagram, even when it was longer than the passed buffer." Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: Switch SMP to crypto_cipher_encrypt_one()Andy Lutomirski1-39/+28
SMP does ECB crypto on stack buffers. This is complicated and fragile, and it will not work if the stack is virtually allocated. Switch to the crypto_cipher interface, which is simpler and safer. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-06-09net: add netdev_lockdep_set_classes() helperEric Dumazet1-14/+1
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet1-0/+2
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 10:41:05 +0000