| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The primary use case for devm_memremap_pages() is to allocate an memmap
array from persistent memory. That capabilty requires vmem_altmap which
requires SPARSEMEM_VMEMMAP.
Also, without SPARSEMEM_VMEMMAP the addition of ZONE_DEVICE expands
ZONES_WIDTH and triggers the:
"Unfortunate NUMA and NUMA Balancing config, growing page-frame for
last_cpupid."
...warning in mm/memory.c. SPARSEMEM_VMEMMAP=n && ZONE_DEVICE=y is not
a configuration we should worry about supporting.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the normal mechanism to make the logging output consistently
"percpu:" instead of a mix of "PERCPU:" and "percpu:"
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most of the mm subsystem uses pr_<level> so make it consistent.
Miscellanea:
- Realign arguments
- Add missing newline to format
- kmemleak-test.c has a "kmemleak: " prefix added to the
"Kmemleak testing" logging message via pr_fmt
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kernel style prefers a single string over split strings when the string is
'user-visible'.
Miscellanea:
- Add a missing newline
- Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are a mixture of pr_warning and pr_warn uses in mm. Use pr_warn
consistently.
Miscellanea:
- Coalesce formats
- Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ZONE_DEVICE (merged in 4.3) and ZONE_CMA (proposed) are examples of new
mm zones that are bumping up against the current maximum limit of 4
zones, i.e. 2 bits in page->flags for the GFP_ZONE_TABLE.
The GFP_ZONE_TABLE poses an interesting constraint since
include/linux/gfp.h gets included by the 32-bit portion of a 64-bit
build. We need to be careful to only build the table for zones that
have a corresponding gfp_t flag. GFP_ZONES_SHIFT is introduced for this
purpose. This patch does not attempt to solve the problem of adding a
new zone that also has a corresponding GFP_ flag.
Vlastimil points out that ZONE_DEVICE, by depending on x86_64 and
SPARSEMEM_VMEMMAP implies that SECTIONS_WIDTH is zero. In other words
even though ZONE_DEVICE does not fit in GFP_ZONE_TABLE it is free to
consume another bit in page->flags (expand ZONES_WIDTH) with room to
spare.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110931
Fixes: 033fbae988fc ("mm: ZONE_DEVICE for "device memory"")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Mark <markk@clara.co.uk>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Do not take memcg_limit_mutex for resetting limits - the cgroup cannot
be altered from userspace anymore, so no need to protect them.
- Use plain page_counter_limit() for resetting ->memory and ->memsw
limits instead of mem_cgrouop_resize_* helpers - we enlarge the limits,
so no need in special handling.
- Reset ->swap and ->tcpmem limits as well.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
online_pages() simply returns an error value if
memory_notify(MEM_GOING_ONLINE, &arg) return a value that is not what we
want for successfully onlining target pages. This patch arms to print
more failure information like offline_pages() in online_pages.
This patch also converts printk(KERN_<LEVEL>) to pr_<level>(), and moves
__offline_pages() to not print failure information with KERN_INFO
according to David Rientjes's suggestion[1].
[1] https://lkml.org/lkml/2016/2/24/1094
Signed-off-by: Chen Yucong <slaoub@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 647757197cd3 ("mm: clarify __GFP_NOFAIL deprecation status") was
incomplete and didn't remove the comment about __GFP_NOFAIL being
deprecated in buffered_rmqueue.
Let's get rid of this leftover but keep the WARN_ON_ONCE for order > 1
because we should really discourage from using __GFP_NOFAIL with higher
order allocations because those are just too subtle.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CMA allocation should be guaranteed to succeed by definition, but,
unfortunately, it would be failed sometimes. It is hard to track down
the problem, because it is related to page reference manipulation and we
don't have any facility to analyze it.
This patch adds tracepoints to track down page reference manipulation.
With it, we can find exact reason of failure and can fix the problem.
Following is an example of tracepoint output. (note: this example is
stale version that printing flags as the number. Recent version will
print it as human readable string.)
<...>-9018 [004] 92.678375: page_ref_set: pfn=0x17ac9 flags=0x0 count=1 mapcount=0 mapping=(nil) mt=4 val=1
<...>-9018 [004] 92.678378: kernel_stack:
=> get_page_from_freelist (ffffffff81176659)
=> __alloc_pages_nodemask (ffffffff81176d22)
=> alloc_pages_vma (ffffffff811bf675)
=> handle_mm_fault (ffffffff8119e693)
=> __do_page_fault (ffffffff810631ea)
=> trace_do_page_fault (ffffffff81063543)
=> do_async_page_fault (ffffffff8105c40a)
=> async_page_fault (ffffffff817581d8)
[snip]
<...>-9018 [004] 92.678379: page_ref_mod: pfn=0x17ac9 flags=0x40048 count=2 mapcount=1 mapping=0xffff880015a78dc1 mt=4 val=1
[snip]
...
...
<...>-9131 [001] 93.174468: test_pages_isolated: start_pfn=0x17800 end_pfn=0x17c00 fin_pfn=0x17ac9 ret=fail
[snip]
<...>-9018 [004] 93.174843: page_ref_mod_and_test: pfn=0x17ac9 flags=0x40068 count=0 mapcount=0 mapping=0xffff880015a78dc1 mt=4 val=-1 ret=1
=> release_pages (ffffffff8117c9e4)
=> free_pages_and_swap_cache (ffffffff811b0697)
=> tlb_flush_mmu_free (ffffffff81199616)
=> tlb_finish_mmu (ffffffff8119a62c)
=> exit_mmap (ffffffff811a53f7)
=> mmput (ffffffff81073f47)
=> do_exit (ffffffff810794e9)
=> do_group_exit (ffffffff81079def)
=> SyS_exit_group (ffffffff81079e74)
=> entry_SYSCALL_64_fastpath (ffffffff817560b6)
This output shows that problem comes from exit path. In exit path, to
improve performance, pages are not freed immediately. They are gathered
and processed by batch. During this process, migration cannot be
possible and CMA allocation is failed. This problem is hard to find
without this page reference tracepoint facility.
Enabling this feature bloat kernel text 30 KB in my configuration.
text data bss dec hex filename
12127327 2243616 1507328 15878271 f2487f vmlinux_disabled
12157208 2258880 1507328 15923416 f2f8d8 vmlinux_enabled
Note that, due to header file dependency problem between mm.h and
tracepoint.h, this feature has to open code the static key functions for
tracepoints. Proposed by Steven Rostedt in following link.
https://lkml.org/lkml/2015/12/9/699
[arnd@arndb.de: crypto/async_pq: use __free_page() instead of put_page()]
[iamjoonsoo.kim@lge.com: fix build failure for xtensa]
[akpm@linux-foundation.org: tweak Kconfig text, per Vlastimil]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
THP defrag is enabled by default to direct reclaim/compact but not wake
kswapd in the event of a THP allocation failure. The problem is that
THP allocation requests potentially enter reclaim/compaction. This
potentially incurs a severe stall that is not guaranteed to be offset by
reduced TLB misses. While there has been considerable effort to reduce
the impact of reclaim/compaction, it is still a high cost and workloads
that should fit in memory fail to do so. Specifically, a simple
anon/file streaming workload will enter direct reclaim on NUMA at least
even though the working set size is 80% of RAM. It's been years and
it's time to throw in the towel.
First, this patch defines THP defrag as follows;
madvise: A failed allocation will direct reclaim/compact if the application requests it
never: Neither reclaim/compact nor wake kswapd
defer: A failed allocation will wake kswapd/kcompactd
always: A failed allocation will direct reclaim/compact (historical behaviour)
khugepaged defrag will enter direct/reclaim but not wake kswapd.
Next it sets the default defrag option to be "madvise" to only enter
direct reclaim/compaction for applications that specifically requested
it.
Lastly, it removes a check from the page allocator slowpath that is
related to __GFP_THISNODE to allow "defer" to work. The callers that
really cares are slub/slab and they are updated accordingly. The slab
one may be surprising because it also corrects a comment as kswapd was
never woken up by that path.
This means that a THP fault will no longer stall for most applications
by default and the ideal for most users that get THP if they are
immediately available. There are still options for users that prefer a
stall at startup of a new application by either restoring historical
behaviour with "always" or pick a half-way point with "defer" where
kswapd does some of the work in the background and wakes kcompactd if
necessary. THP defrag for khugepaged remains enabled and will enter
direct/reclaim but no wakeup kswapd or kcompactd.
After this patch a THP allocation failure will quickly fallback and rely
on khugepaged to recover the situation at some time in the future. In
some cases, this will reduce THP usage but the benefit of THP is hard to
measure and not a universal win where as a stall to reclaim/compaction
is definitely measurable and can be painful.
The first test for this is using "usemem" to read a large file and write
a large anonymous mapping (to avoid the zero page) multiple times. The
total size of the mappings is 80% of RAM and the benchmark simply
measures how long it takes to complete. It uses multiple threads to see
if that is a factor. On UMA, the performance is almost identical so is
not reported but on NUMA, we see this
usemem
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Amean System-1 102.86 ( 0.00%) 46.81 ( 54.50%)
Amean System-4 37.85 ( 0.00%) 34.02 ( 10.12%)
Amean System-7 48.12 ( 0.00%) 46.89 ( 2.56%)
Amean System-12 51.98 ( 0.00%) 56.96 ( -9.57%)
Amean System-21 80.16 ( 0.00%) 79.05 ( 1.39%)
Amean System-30 110.71 ( 0.00%) 107.17 ( 3.20%)
Amean System-48 127.98 ( 0.00%) 124.83 ( 2.46%)
Amean Elapsd-1 185.84 ( 0.00%) 105.51 ( 43.23%)
Amean Elapsd-4 26.19 ( 0.00%) 25.58 ( 2.33%)
Amean Elapsd-7 21.65 ( 0.00%) 21.62 ( 0.16%)
Amean Elapsd-12 18.58 ( 0.00%) 17.94 ( 3.43%)
Amean Elapsd-21 17.53 ( 0.00%) 16.60 ( 5.33%)
Amean Elapsd-30 17.45 ( 0.00%) 17.13 ( 1.84%)
Amean Elapsd-48 15.40 ( 0.00%) 15.27 ( 0.82%)
For a single thread, the benchmark completes 43.23% faster with this
patch applied with smaller benefits as the thread increases. Similar,
notice the large reduction in most cases in system CPU usage. The
overall CPU time is
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
User 10357.65 10438.33
System 3988.88 3543.94
Elapsed 2203.01 1634.41
Which is substantial. Now, the reclaim figures
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
Minor Faults 128458477 278352931
Major Faults 2174976 225
Swap Ins 16904701 0
Swap Outs 17359627 0
Allocation stalls 43611 0
DMA allocs 0 0
DMA32 allocs 19832646 19448017
Normal allocs 614488453 580941839
Movable allocs 0 0
Direct pages scanned 24163800 0
Kswapd pages scanned 0 0
Kswapd pages reclaimed 0 0
Direct pages reclaimed 20691346 0
Compaction stalls 42263 0
Compaction success 938 0
Compaction failures 41325 0
This patch eliminates almost all swapping and direct reclaim activity.
There is still overhead but it's from NUMA balancing which does not
identify that it's pointless trying to do anything with this workload.
I also tried the thpscale benchmark which forces a corner case where
compaction can be used heavily and measures the latency of whether base
or huge pages were used
thpscale Fault Latencies
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Amean fault-base-1 5288.84 ( 0.00%) 2817.12 ( 46.73%)
Amean fault-base-3 6365.53 ( 0.00%) 3499.11 ( 45.03%)
Amean fault-base-5 6526.19 ( 0.00%) 4363.06 ( 33.15%)
Amean fault-base-7 7142.25 ( 0.00%) 4858.08 ( 31.98%)
Amean fault-base-12 13827.64 ( 0.00%) 10292.11 ( 25.57%)
Amean fault-base-18 18235.07 ( 0.00%) 13788.84 ( 24.38%)
Amean fault-base-24 21597.80 ( 0.00%) 24388.03 (-12.92%)
Amean fault-base-30 26754.15 ( 0.00%) 19700.55 ( 26.36%)
Amean fault-base-32 26784.94 ( 0.00%) 19513.57 ( 27.15%)
Amean fault-huge-1 4223.96 ( 0.00%) 2178.57 ( 48.42%)
Amean fault-huge-3 2194.77 ( 0.00%) 2149.74 ( 2.05%)
Amean fault-huge-5 2569.60 ( 0.00%) 2346.95 ( 8.66%)
Amean fault-huge-7 3612.69 ( 0.00%) 2997.70 ( 17.02%)
Amean fault-huge-12 3301.75 ( 0.00%) 6727.02 (-103.74%)
Amean fault-huge-18 6696.47 ( 0.00%) 6685.72 ( 0.16%)
Amean fault-huge-24 8000.72 ( 0.00%) 9311.43 (-16.38%)
Amean fault-huge-30 13305.55 ( 0.00%) 9750.45 ( 26.72%)
Amean fault-huge-32 9981.71 ( 0.00%) 10316.06 ( -3.35%)
The average time to fault pages is substantially reduced in the majority
of caseds but with the obvious caveat that fewer THPs are actually used
in this adverse workload
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Percentage huge-1 0.71 ( 0.00%) 14.04 (1865.22%)
Percentage huge-3 10.77 ( 0.00%) 33.05 (206.85%)
Percentage huge-5 60.39 ( 0.00%) 38.51 (-36.23%)
Percentage huge-7 45.97 ( 0.00%) 34.57 (-24.79%)
Percentage huge-12 68.12 ( 0.00%) 40.07 (-41.17%)
Percentage huge-18 64.93 ( 0.00%) 47.82 (-26.35%)
Percentage huge-24 62.69 ( 0.00%) 44.23 (-29.44%)
Percentage huge-30 43.49 ( 0.00%) 55.38 ( 27.34%)
Percentage huge-32 50.72 ( 0.00%) 51.90 ( 2.35%)
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
Minor Faults 37429143 47564000
Major Faults 1916 1558
Swap Ins 1466 1079
Swap Outs 2936863 149626
Allocation stalls 62510 3
DMA allocs 0 0
DMA32 allocs 6566458 6401314
Normal allocs 216361697 216538171
Movable allocs 0 0
Direct pages scanned 25977580 17998
Kswapd pages scanned 0 3638931
Kswapd pages reclaimed 0 207236
Direct pages reclaimed 8833714 88
Compaction stalls 103349 5
Compaction success 270 4
Compaction failures 103079 1
Note again that while this does swap as it's an aggressive workload, the
direct relcim activity and allocation stalls is substantially reduced.
There is some kswapd activity but ftrace showed that the kswapd activity
was due to normal wakeups from 4K pages being allocated.
Compaction-related stalls and activity are almost eliminated.
I also tried the stutter benchmark. For this, I do not have figures for
NUMA but it's something that does impact UMA so I'll report what is
available
stutter
4.4.0 4.4.0
kcompactd-v1r1 nodefrag-v1r3
Min mmap 7.3571 ( 0.00%) 7.3438 ( 0.18%)
1st-qrtle mmap 7.5278 ( 0.00%) 17.9200 (-138.05%)
2nd-qrtle mmap 7.6818 ( 0.00%) 21.6055 (-181.25%)
3rd-qrtle mmap 11.0889 ( 0.00%) 21.8881 (-97.39%)
Max-90% mmap 27.8978 ( 0.00%) 22.1632 ( 20.56%)
Max-93% mmap 28.3202 ( 0.00%) 22.3044 ( 21.24%)
Max-95% mmap 28.5600 ( 0.00%) 22.4580 ( 21.37%)
Max-99% mmap 29.6032 ( 0.00%) 25.5216 ( 13.79%)
Max mmap 4109.7289 ( 0.00%) 4813.9832 (-17.14%)
Mean mmap 12.4474 ( 0.00%) 19.3027 (-55.07%)
This benchmark is trying to fault an anonymous mapping while there is a
heavy IO load -- a scenario that desktop users used to complain about
frequently. This shows a mix because the ideal case of mapping with THP
is not hit as often. However, note that 99% of the mappings complete
13.79% faster. The CPU usage here is particularly interesting
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
User 67.50 0.99
System 1327.88 91.30
Elapsed 2079.00 2128.98
And once again we look at the reclaim figures
4.4.0 4.4.0
kcompactd-v1r1nodefrag-v1r3
Minor Faults 335241922 1314582827
Major Faults 715 819
Swap Ins 0 0
Swap Outs 0 0
Allocation stalls 532723 0
DMA allocs 0 0
DMA32 allocs 1822364341 1177950222
Normal allocs 1815640808 1517844854
Movable allocs 0 0
Direct pages scanned 21892772 0
Kswapd pages scanned 20015890 41879484
Kswapd pages reclaimed 19961986 41822072
Direct pages reclaimed 21892741 0
Compaction stalls 1065755 0
Compaction success 514 0
Compaction failures 1065241 0
Allocation stalls and all direct reclaim activity is eliminated as well
as compaction-related stalls.
THP gives impressive gains in some cases but only if they are quickly
available. We're not going to reach the point where they are completely
free so lets take the costs out of the fast paths finally and defer the
cost to kswapd, kcompactd and khugepaged where it belongs.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If an oom killed thread calls mempool_alloc(), it is possible that it'll
loop forever if there are no elements on the freelist since
__GFP_NOMEMALLOC prevents it from accessing needed memory reserves in
oom conditions.
Only set __GFP_NOMEMALLOC if there are elements on the freelist. If
there are no free elements, allow allocations without the bit set so
that memory reserves can be accessed if needed.
Additionally, using mempool_alloc() with __GFP_NOMEMALLOC is not
supported since the implementation can loop forever without accessing
memory reserves when needed.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In machines with 140G of memory and enterprise flash storage, we have
seen read and write bursts routinely exceed the kswapd watermarks and
cause thundering herds in direct reclaim. Unfortunately, the only way
to tune kswapd aggressiveness is through adjusting min_free_kbytes - the
system's emergency reserves - which is entirely unrelated to the
system's latency requirements. In order to get kswapd to maintain a
250M buffer of free memory, the emergency reserves need to be set to 1G.
That is a lot of memory wasted for no good reason.
On the other hand, it's reasonable to assume that allocation bursts and
overall allocation concurrency scale with memory capacity, so it makes
sense to make kswapd aggressiveness a function of that as well.
Change the kswapd watermark scale factor from the currently fixed 25% of
the tunable emergency reserve to a tunable 0.1% of memory.
Beyond 1G of memory, this will produce bigger watermark steps than the
current formula in default settings. Ensure that the new formula never
chooses steps smaller than that, i.e. 25% of the emergency reserve.
On a 140G machine, this raises the default watermark steps - the
distance between min and low, and low and high - from 16M to 143M.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are few things about *pte_alloc*() helpers worth cleaning up:
- 'vma' argument is unused, let's drop it;
- most __pte_alloc() callers do speculative check for pmd_none(),
before taking ptl: let's introduce pte_alloc() macro which does
the check.
The only direct user of __pte_alloc left is userfaultfd, which has
different expectation about atomicity wrt pmd.
- pte_alloc_map() and pte_alloc_map_lock() are redefined using
pte_alloc().
[sudeep.holla@arm.com: fix build for arm64 hugetlbpage]
[sfr@canb.auug.org.au: fix arch/arm/mm/mmu.c some more]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory
statistics protocol, corresponding to 'Available' in /proc/meminfo.
It indicates to the hypervisor how big the balloon can be inflated
without pushing the guest system to swap. This metric would be very
useful in VM orchestration software to improve memory management of
different VMs under overcommit.
This patch (of 2):
Factor out calculation of the available memory counter into a separate
exportable function, in order to be able to use it in other parts of the
kernel.
In particular, it appears a relevant metric to report to the hypervisor
via virtio-balloon statistics interface (in a followup patch).
Signed-off-by: Igor Redko <redkoi@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
MEMORY_HOTPLUG already depends on ARCH_ENABLE_MEMORY_HOTPLUG which is
selected by the supported architectures, so the following arch depend is
unnecessary.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We remove one instace of flush_tlb_range here. That was added by commit
f714f4f20e59 ("mm: numa: call MMU notifiers on THP migration"). But the
pmdp_huge_clear_flush_notify should have done the require flush for us.
Hence remove the extra flush.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we have two copies of the same code which implements memory
overcommitment logic. Let's move it into mm/util.c and hence avoid
duplication. No functional changes here.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
max_map_count sysctl unrelated to scheduler. Move its bits from
include/linux/sched/sysctl.h to include/linux/mm.h.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Count how many times we put a THP in split queue. Currently, it happens
on partial unmap of a THP.
Rapidly growing value can indicate that an application behaves
unfriendly wrt THP: often fault in huge page and then unmap part of it.
This leads to unnecessary memory fragmentation and the application may
require tuning.
The event also can help with debugging kernel [mis-]behaviour.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Workingset code was recently made memcg aware, but shadow node shrinker
is still global. As a result, one small cgroup can consume all memory
available for shadow nodes, possibly hurting other cgroups by reclaiming
their shadow nodes, even though reclaim distances stored in its shadow
nodes have no effect. To avoid this, we need to make shadow node
shrinker memcg aware.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A page is activated on refault if the refault distance stored in the
corresponding shadow entry is less than the number of active file pages.
Since active file pages can't occupy more than half memory, we assume
that the maximal effective refault distance can't be greater than half
the number of present pages and size the shadow nodes lru list
appropriately. Generally speaking, this assumption is correct, but it
can result in wasting a considerable chunk of memory on stale shadow
nodes in case the portion of file pages is small, e.g. if a workload
mostly uses anonymous memory.
To sort this out, we need to compute the size of shadow nodes lru basing
not on the maximal possible, but the current size of file cache. We
could take the size of active file lru for the maximal refault distance,
but active lru is pretty unstable - it can shrink dramatically at
runtime possibly disrupting workingset detection logic.
Instead we assume that the maximal refault distance equals half the
total number of file cache pages. This will protect us against active
file lru size fluctuations while still being correct, because size of
active lru is normally maintained lower than size of inactive lru.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As kmem accounting is now either enabled for all cgroups or disabled
system-wide, there's no point in having memcg_kmem_online() helper -
instead one can use memcg_kmem_enabled() and mem_cgroup_online(), as
shrink_slab() now does.
There are only two places left where this helper is used -
__memcg_kmem_charge() and memcg_create_kmem_cache(). The former can
only be called if memcg_kmem_enabled() returned true. Since the cgroup
it operates on is online, mem_cgroup_is_root() check will be enough.
memcg_create_kmem_cache() can't use mem_cgroup_online() helper instead
of memcg_kmem_online(), because it relies on the fact that in
memcg_offline_kmem() memcg->kmem_state is changed before
memcg_deactivate_kmem_caches() is called, but there we can just
open-code the check.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's just convenient to implement a memcg aware shrinker when you know
that shrink_control->memcg != NULL unless memcg_kmem_enabled() returns
false.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Workingset code was recently made memcg aware, but shadow node shrinker
is still global. As a result, one small cgroup can consume all memory
available for shadow nodes, possibly hurting other cgroups by reclaiming
their shadow nodes, even though reclaim distances stored in its shadow
nodes have no effect. To avoid this, we need to make shadow node
shrinker memcg aware.
The actual work is done in patch 6 of the series. Patches 1 and 2
prepare memcg/shrinker infrastructure for the change. Patch 3 is just a
collateral cleanup. Patch 4 makes radix_tree_node accounted, which is
necessary for making shadow node shrinker memcg aware. Patch 5 reduces
shadow nodes overhead in case workload mostly uses anonymous pages.
This patch:
Currently, in the legacy hierarchy kmem accounting is off for all
cgroups by default and must be enabled explicitly by writing something
to memory.kmem.limit_in_bytes. Since we don't support reclaim on
hitting kmem limit, nor do we have any plans to implement it, this is
likely to be -1, just to enable kmem accounting and limit kernel memory
consumption by the memory.limit_in_bytes along with user memory.
This user API was introduced when the implementation of kmem accounting
lacked slab shrinker support and hence was useless in practice. Things
have changed since then - slab shrinkers were made memcg aware, the
accounting overhead seems to be negligible, and a failure to charge a
kmem allocation should not have critical consequences, because we only
account those kernel objects that should be safe to fail. That's why
kmem accounting is enabled by default for all cgroups in the default
hierarchy, which will eventually replace the legacy one.
The ability to enable kmem accounting for some cgroups while keeping it
disabled for others is getting difficult to maintain. E.g. to make
shadow node shrinker memcg aware (see mm/workingset.c), we need to know
the relationship between the number of shadow nodes allocated for a
cgroup and the size of its lru list. If kmem accounting is enabled for
all cgroups there is no problem, but what should we do if kmem
accounting is enabled only for half of cgroups? We've no other choice
but use global lru stats while scanning root cgroup's shadow nodes, but
that would be wrong if kmem accounting was enabled for all cgroups
(which is the case if the unified hierarchy is used), in which case we
should use lru stats of the root cgroup's lruvec.
That being said, let's enable kmem accounting for all memory cgroups by
default. If one finds it unstable or too costly, it can always be
disabled system-wide by passing cgroup.memory=nokmem to the kernel at
boot time.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Similarly to direct reclaim/compaction, kswapd attempts to combine
reclaim and compaction to attempt making memory allocation of given
order available.
The details differ from direct reclaim e.g. in having high watermark as
a goal. The code involved in kswapd's reclaim/compaction decisions has
evolved to be quite complex.
Testing reveals that it doesn't actually work in at least one scenario,
and closer inspection suggests that it could be greatly simplified
without compromising on the goal (make high-order page available) or
efficiency (don't reclaim too much). The simplification relieas of
doing all compaction in kcompactd, which is simply woken up when high
watermarks are reached by kswapd's reclaim.
The scenario where kswapd compaction doesn't work was found with mmtests
test stress-highalloc configured to attempt order-9 allocations without
direct reclaim, just waking up kswapd. There was no compaction attempt
from kswapd during the whole test. Some added instrumentation shows
what happens:
- balance_pgdat() sets end_zone to Normal, as it's not balanced
- reclaim is attempted on DMA zone, which sets nr_attempted to 99, but
it cannot reclaim anything, so sc.nr_reclaimed is 0
- for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so
it merely checks if high watermarks were reached for base pages.
This is true, so no reclaim is attempted. For DMA, testorder=0
wasn't used, as compaction_suitable() returned COMPACT_SKIPPED
- even though the pgdat_needs_compaction flag wasn't set to false, no
compaction happens due to the condition sc.nr_reclaimed >
nr_attempted being false (as 0 < 99)
- priority-- due to nr_reclaimed being 0, repeat until priority reaches
0 pgdat_balanced() is false as only the small zone DMA appears
balanced (curiously in that check, watermark appears OK and
compaction_suitable() returns COMPACT_PARTIAL, because a lower
classzone_idx is used there)
Now, even if it was decided that reclaim shouldn't be attempted on the
DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 >
nr_attempted=0) is also false. The condition really should use >= as
the comment suggests. Then there is a mismatch in the check for setting
pgdat_needs_compaction to false using low watermark, while the rest uses
high watermark, and who knows what other subtlety. Hopefully this
demonstrates that this is unsustainable.
Luckily we can simplify this a lot. The reclaim/compaction decisions
make sense for direct reclaim scenario, but in kswapd, our primary goal
is to reach high watermark in order-0 pages. Afterwards we can attempt
compaction just once. Unlike direct reclaim, we don't reclaim extra
pages (over the high watermark), the current code already disallows it
for good reasons.
After this patch, we simply wake up kcompactd to process the pgdat,
after we have either succeeded or failed to reach the high watermarks in
kswapd, which goes to sleep. We pass kswapd's order and classzone_idx,
so kcompactd can apply the same criteria to determine which zones are
worth compacting. Note that we use the classzone_idx from
wakeup_kswapd(), not balanced_classzone_idx which can include higher
zones that kswapd tried to balance too, but didn't consider them in
pgdat_balanced().
Since kswapd now cannot create high-order pages itself, we need to
adjust how it determines the zones to be balanced. The key element here
is adding a "highorder" parameter to zone_balanced, which, when set to
false, makes it consider only order-0 watermark instead of the desired
higher order (this was done previously by kswapd_shrink_zone(), but not
elsewhere). This false is passed for example in pgdat_balanced().
Importantly, wakeup_kswapd() uses true to make sure kswapd and thus
kcompactd are woken up for a high-order allocation failure.
The last thing is to decide what to do with pageblock_skip bitmap
handling. Compaction maintains a pageblock_skip bitmap to record
pageblocks where isolation recently failed. This bitmap can be reset by
three ways:
1) direct compaction is restarting after going through the full deferred cycle
2) kswapd goes to sleep, and some other direct compaction has previously
finished scanning the whole zone and set zone->compact_blockskip_flush.
Note that a successful direct compaction clears this flag.
3) compaction was invoked manually via trigger in /proc
The case 2) is somewhat fuzzy to begin with, but after introducing
kcompactd we should update it. The check for direct compaction in 1),
and to set the flush flag in 2) use current_is_kswapd(), which doesn't
work for kcompactd. Thus, this patch adds bool direct_compaction to
compact_control to use in 2). For the case 1) we remove the check
completely - unlike the former kswapd compaction, kcompactd does use the
deferred compaction functionality, so flushing tied to restarting from
deferred compaction makes sense here.
Note that when kswapd goes to sleep, kcompactd is woken up, so it will
see the flushed pageblock_skip bits. This is different from when the
former kswapd compaction observed the bits and I believe it makes more
sense. Kcompactd can afford to be more thorough than a direct
compaction trying to limit allocation latency, or kswapd whose primary
goal is to reclaim.
For testing, I used stress-highalloc configured to do order-9
allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just
on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in
phases 1 and 2 work as usual):
stress-highalloc
4.5-rc1+before 4.5-rc1+after
-nodirect -nodirect
Success 1 Min 1.00 ( 0.00%) 5.00 (-66.67%)
Success 1 Mean 1.40 ( 0.00%) 6.20 (-55.00%)
Success 1 Max 2.00 ( 0.00%) 7.00 (-16.67%)
Success 2 Min 1.00 ( 0.00%) 5.00 (-66.67%)
Success 2 Mean 1.80 ( 0.00%) 6.40 (-52.38%)
Success 2 Max 3.00 ( 0.00%) 7.00 (-16.67%)
Success 3 Min 34.00 ( 0.00%) 62.00 ( 1.59%)
Success 3 Mean 41.80 ( 0.00%) 63.80 ( 1.24%)
Success 3 Max 53.00 ( 0.00%) 65.00 ( 2.99%)
User 3166.67 3181.09
System 1153.37 1158.25
Elapsed 1768.53 1799.37
4.5-rc1+before 4.5-rc1+after
-nodirect -nodirect
Direct pages scanned 32938 32797
Kswapd pages scanned 2183166 2202613
Kswapd pages reclaimed 2152359 2143524
Direct pages reclaimed 32735 32545
Percentage direct scans 1% 1%
THP fault alloc 579 612
THP collapse alloc 304 316
THP splits 0 0
THP fault fallback 793 778
THP collapse fail 11 16
Compaction stalls 1013 1007
Compaction success 92 67
Compaction failures 920 939
Page migrate success 238457 721374
Page migrate failure 23021 23469
Compaction pages isolated 504695 1479924
Compaction migrate scanned 661390 8812554
Compaction free scanned 13476658 84327916
Compaction cost 262 838
After this patch we see improvements in allocation success rate
(especially for phase 3) along with increased compaction activity. The
compaction stalls (direct compaction) in the interfering kernel builds
(probably THP's) also decreased somewhat thanks to kcompactd activity,
yet THP alloc successes improved a bit.
Note that elapsed and user time isn't so useful for this benchmark,
because of the background interference being unpredictable. It's just
to quickly spot some major unexpected differences. System time is
somewhat more useful and that didn't increase.
Also (after adjusting mmtests' ftrace monitor):
Time kswapd awake 2547781 2269241
Time kcompactd awake 0 119253
Time direct compacting 939937 557649
Time kswapd compacting 0 0
Time kcompactd compacting 0 119099
The decrease of overal time spent compacting appears to not match the
increased compaction stats. I suspect the tasks get rescheduled and
since the ftrace monitor doesn't see that, the reported time is wall
time, not CPU time. But arguably direct compactors care about overall
latency anyway, whether busy compacting or waiting for CPU doesn't
matter. And that latency seems to almost halved.
It's also interesting how much time kswapd spent awake just going
through all the priorities and failing to even try compacting, over and
over.
We can also configure stress-highalloc to perform both direct
reclaim/compaction and wakeup kswapd/kcompactd, by using
GFP_KERNEL|__GFP_HIGH|__GFP_COMP:
stress-highalloc
4.5-rc1+before 4.5-rc1+after
-direct -direct
Success 1 Min 4.00 ( 0.00%) 9.00 (-50.00%)
Success 1 Mean 8.00 ( 0.00%) 10.00 (-19.05%)
Success 1 Max 12.00 ( 0.00%) 11.00 ( 15.38%)
Success 2 Min 4.00 ( 0.00%) 9.00 (-50.00%)
Success 2 Mean 8.20 ( 0.00%) 10.00 (-16.28%)
Success 2 Max 13.00 ( 0.00%) 11.00 ( 8.33%)
Success 3 Min 75.00 ( 0.00%) 74.00 ( 1.33%)
Success 3 Mean 75.60 ( 0.00%) 75.20 ( 0.53%)
Success 3 Max 77.00 ( 0.00%) 76.00 ( 0.00%)
User 3344.73 3246.04
System 1194.24 1172.29
Elapsed 1838.04 1836.76
4.5-rc1+before 4.5-rc1+after
-direct -direct
Direct pages scanned 125146 120966
Kswapd pages scanned 2119757 2135012
Kswapd pages reclaimed 2073183 2108388
Direct pages reclaimed 124909 120577
Percentage direct scans 5% 5%
THP fault alloc 599 652
THP collapse alloc 323 354
THP splits 0 0
THP fault fallback 806 793
THP collapse fail 17 16
Compaction stalls 2457 2025
Compaction success 906 518
Compaction failures 1551 1507
Page migrate success 2031423 2360608
Page migrate failure 32845 40852
Compaction pages isolated 4129761 4802025
Compaction migrate scanned 11996712 21750613
Compaction free scanned 214970969 344372001
Compaction cost 2271 2694
In this scenario, this patch doesn't change the overall success rate as
direct compaction already tries all it can. There's however significant
reduction in direct compaction stalls (that is, the number of
allocations that went into direct compaction). The number of successes
(i.e. direct compaction stalls that ended up with successful
allocation) is reduced by the same number. This means the offload to
kcompactd is working as expected, and direct compaction is reduced
either due to detecting contention, or compaction deferred by kcompactd.
In the previous version of this patchset there was some apparent
reduction of success rate, but the changes in this version (such as
using sync compaction only), new baseline kernel, and/or averaging
results from 5 executions (my bet), made this go away.
Ftrace-based stats seem to roughly agree:
Time kswapd awake 2532984 2326824
Time kcompactd awake 0 257916
Time direct compacting 864839 735130
Time kswapd compacting 0 0
Time kcompactd compacting 0 257585
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can reuse the nid we've determined instead of repeated pfn_to_nid()
usages. Also zone_to_nid() should be a bit cheaper in general than
pfn_to_nid().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memory compaction can be currently performed in several contexts:
- kswapd balancing a zone after a high-order allocation failure
- direct compaction to satisfy a high-order allocation, including THP
page fault attemps
- khugepaged trying to collapse a hugepage
- manually from /proc
The purpose of compaction is two-fold. The obvious purpose is to
satisfy a (pending or future) high-order allocation, and is easy to
evaluate. The other purpose is to keep overal memory fragmentation low
and help the anti-fragmentation mechanism. The success wrt the latter
purpose is more
The current situation wrt the purposes has a few drawbacks:
- compaction is invoked only when a high-order page or hugepage is not
available (or manually). This might be too late for the purposes of
keeping memory fragmentation low.
- direct compaction increases latency of allocations. Again, it would
be better if compaction was performed asynchronously to keep
fragmentation low, before the allocation itself comes.
- (a special case of the previous) the cost of compaction during THP
page faults can easily offset the benefits of THP.
- kswapd compaction appears to be complex, fragile and not working in
some scenarios. It could also end up compacting for a high-order
allocation request when it should be reclaiming memory for a later
order-0 request.
To improve the situation, we should be able to benefit from an
equivalent of kswapd, but for compaction - i.e. a background thread
which responds to fragmentation and the need for high-order allocations
(including hugepages) somewhat proactively.
One possibility is to extend the responsibilities of kswapd, which could
however complicate its design too much. It should be better to let
kswapd handle reclaim, as order-0 allocations are often more critical
than high-order ones.
Another possibility is to extend khugepaged, but this kthread is a
single instance and tied to THP configs.
This patch goes with the option of a new set of per-node kthreads called
kcompactd, and lays the foundations, without introducing any new
tunables. The lifecycle mimics kswapd kthreads, including the memory
hotplug hooks.
For compaction, kcompactd uses the standard compaction_suitable() and
ompact_finished() criteria and the deferred compaction functionality.
Unlike direct compaction, it uses only sync compaction, as there's no
allocation latency to minimize.
This patch doesn't yet add a call to wakeup_kcompactd. The kswapd
compact/reclaim loop for high-order pages will be replaced by waking up
kcompactd in the next patch with the description of what's wrong with
the old approach.
Waking up of the kcompactd threads is also tied to kswapd activity and
follows these rules:
- we don't want to affect any fastpaths, so wake up kcompactd only from
the slowpath, as it's done for kswapd
- if kswapd is doing reclaim, it's more important than compaction, so
don't invoke kcompactd until kswapd goes to sleep
- the target order used for kswapd is passed to kcompactd
Future possible future uses for kcompactd include the ability to wake up
kcompactd on demand in special situations, such as when hugepages are
not available (currently not done due to __GFP_NO_KSWAPD) or when a
fragmentation event (i.e. __rmqueue_fallback()) occurs. It's also
possible to perform periodic compaction with kcompactd.
[arnd@arndb.de: fix build errors with kcompactd]
[paul.gortmaker@windriver.com: don't use modular references for non modular code]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During work on kcompactd integration I have spotted a confusing check of
balance_classzone_idx, which I believe is bogus.
The balanced_classzone_idx is filled by balance_pgdat() as the highest
zone it attempted to balance. This was introduced by commit dc83edd941f4
("mm: kswapd: use the classzone idx that kswapd was using for
sleeping_prematurely()").
The intention is that (as expressed in today's function names), the
value used for kswapd_shrink_zone() calls in balance_pgdat() is the same
as for the decisions in kswapd_try_to_sleep().
An unwanted side-effect of that commit was breaking the checks in
kswapd() whether there was another kswapd_wakeup with a tighter (=lower)
classzone_idx. Commits 215ddd6664ce ("mm: vmscan: only read
new_classzone_idx from pgdat when reclaiming successfully") and
d2ebd0f6b895 ("kswapd: avoid unnecessary rebalance after an unsuccessful
balancing") tried to fixed, but apparently introduced a bogus check that
this patch removes.
Consider zone indexes X < Y < Z, where:
- Z is the value used for the first kswapd wakeup.
- Y is returned as balanced_classzone_idx, which means zones with index higher
than Y (including Z) were found to be unreclaimable.
- X is the value used for the second kswapd wakeup
The new wakeup with value X means that kswapd is now supposed to balance
harder all zones with index <= X. But instead, due to Y < Z, it will go
sleep and won't read the new value X. This is subtly wrong.
The effect of this patch is that kswapd will react better in some
situations, where e.g. the first wakeup is for ZONE_DMA32, the second is
for ZONE_DMA, and due to unreclaimable ZONE_NORMAL. Before this patch,
kswapd would go sleep instead of reclaiming ZONE_DMA harder. I expect
these situations are very rare, and more value is in better
maintainability due to the removal of confusing and bogus check.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query
whether it is enabled or not in runtime.
[akpm@linux-foundation.org: export _debug_pagealloc_enabled to modules]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query
whether it is enabled or not in runtime.
[akpm@linux-foundation.org: clean up code, per Christian]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As CONFIG_DEBUG_PAGEALLOC can be enabled/disabled via kernel parameters
we can optimize some cases by checking the enablement state.
This is follow-up work for Christian's Optimize CONFIG_DEBUG_PAGEALLOC:
https://lkml.org/lkml/2016/1/27/194
Remaining work is to make sparc to be aware of this but it looks not
easy for me so I skip that in this series.
This patch (of 5):
We can disable debug_pagealloc processing even if the code is complied
with CONFIG_DEBUG_PAGEALLOC. This patch changes the code to query
whether it is enabled or not in runtime.
[akpm@linux-foundation.org: update comment, per David. Adjust comment to use 80 cols]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently /proc/kpageflags returns nothing for "tail" buddy pages, which
is inconvenient when grasping how free pages are distributed. This
patch sets KPF_BUDDY for such pages.
With this patch:
$ grep MemFree /proc/meminfo ; tools/vm/page-types -b buddy
MemFree: 3134992 kB
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000400 779272 3044 __________B_______________________________ buddy
0x0000000000000c00 4385 17 __________BM______________________________ buddy,mmap
total 783657 3061
783657 pages is 3134628 kB (roughly consistent with the global counter,)
so it's OK.
[akpm@linux-foundation.org: update comment, per Naoya]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Show how much memory is allocated to kernel stacks.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Show how much memory is used for storing reclaimable and unreclaimable
in-kernel data structures allocated from slab caches.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, tree_{stat,events} helpers can only get one stat index at a
time, so when there are a lot of stats to be reported one has to call it
over and over again (see memory_stat_show). This is neither effective,
nor does it look good. Instead, let's make these helpers take a
snapshot of all available counters.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Slab pages are charged in two steps. First, an appropriate per memcg
cache is selected (see memcg_kmem_get_cache) basing on the current
context, then the new slab page is charged to the memory cgroup which
the selected cache was created for (see memcg_charge_slab ->
__memcg_kmem_charge_memcg). It is OK to bypass kmemcg charge at step 1,
but if step 1 succeeded and we successfully allocated a new slab page,
step 2 must be performed, otherwise we would get a per memcg kmem cache
which contains a slab that does not hold a reference to the memory
cgroup owning the cache. Since per memcg kmem caches are destroyed on
memcg css free, this could result in freeing a cache while there are
still active objects in it.
However, currently we will bypass slab page charge if the memory cgroup
owning the cache is offline (see __memcg_kmem_charge_memcg). This is
very unlikely to occur in practice, because for this to happen a process
must be migrated to a different cgroup and the old cgroup must be
removed while the process is in kmalloc somewhere between steps 1 and 2
(e.g. trying to allocate a new page). Nevertheless, it's still better
to eliminate such a possibility.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the OOM killer scans tasks and encounters a PF_EXITING one, it
force-selects that task regardless of the score. The problem is that if
that task got stuck waiting for some state the allocation site is
holding, the OOM reaper can not move on to the next best victim.
Frankly, I don't even know why we check for exiting tasks in the OOM
killer. We've tried direct reclaim at least 15 times by the time we
decide the system is OOM, there was plenty of time to exit and free
memory; and a task might exit voluntarily right after we issue a kill.
This is testing pure noise. Remove it.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge first patch-bomb from Andrew Morton:
- some misc things
- ofs2 updates
- about half of MM
- checkpatch updates
- autofs4 update
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
autofs4: fix string.h include in auto_dev-ioctl.h
autofs4: use pr_xxx() macros directly for logging
autofs4: change log print macros to not insert newline
autofs4: make autofs log prints consistent
autofs4: fix some white space errors
autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked()
autofs4: fix coding style line length in autofs4_wait()
autofs4: fix coding style problem in autofs4_get_set_timeout()
autofs4: coding style fixes
autofs: show pipe inode in mount options
kallsyms: add support for relative offsets in kallsyms address table
kallsyms: don't overload absolute symbol type for percpu symbols
x86: kallsyms: disable absolute percpu symbols on !SMP
checkpatch: fix another left brace warning
checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses
checkpatch: warn on bare unsigned or signed declarations without int
checkpatch: exclude asm volatile from complex macro check
mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate()
mm: migrate: consolidate mem_cgroup_migrate() calls
mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous
...
|
|
Migration accounting in the memory controller used to have to handle
both oldpage and newpage being on the LRU already; fuse's page cache
replacement used to pass a recycled newpage that had been uncharged but
not freed and removed from the LRU, and the memcg migration code used to
uncharge oldpage to "pass on" the existing charge to newpage.
Nowadays, pages are no longer uncharged when truncated from the page
cache, but rather only at free time, so if a LRU page is recycled in
page cache replacement it'll also still be charged. And we bail out of
the charge transfer altogether in that case. Tell commit_charge() that
we know newpage is not on the LRU, to avoid taking the zone->lru_lock
unnecessarily from the migration path.
But also, oldpage is no longer uncharged inside migration. We only use
oldpage for its page->mem_cgroup and page size, so we don't care about
its LRU state anymore either. Remove any mention from the kernel doc.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rather than scattering mem_cgroup_migrate() calls all over the place,
have a single call from a safe place where every migration operation
eventually ends up in - migrate_page_copy().
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a performance drop report due to hugepage allocation and in
there half of cpu time are spent on pageblock_pfn_to_page() in
compaction [1].
In that workload, compaction is triggered to make hugepage but most of
pageblocks are un-available for compaction due to pageblock type and
skip bit so compaction usually fails. Most costly operations in this
case is to find valid pageblock while scanning whole zone range. To
check if pageblock is valid to compact, valid pfn within pageblock is
required and we can obtain it by calling pageblock_pfn_to_page(). This
function checks whether pageblock is in a single zone and return valid
pfn if possible. Problem is that we need to check it every time before
scanning pageblock even if we re-visit it and this turns out to be very
expensive in this workload.
Although we have no way to skip this pageblock check in the system where
hole exists at arbitrary position, we can use cached value for zone
continuity and just do pfn_to_page() in the system where hole doesn't
exist. This optimization considerably speeds up in above workload.
Before vs After
Max: 1096 MB/s vs 1325 MB/s
Min: 635 MB/s 1015 MB/s
Avg: 899 MB/s 1194 MB/s
Avg is improved by roughly 30% [2].
[1]: http://www.spinics.net/lists/linux-mm/msg97378.html
[2]: https://lkml.org/lkml/2015/12/9/23
[akpm@linux-foundation.org: don't forget to restore zone->contiguous on error path, per Vlastimil]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pageblock_pfn_to_page() is used to check there is valid pfn and all
pages in the pageblock is in a single zone. If there is a hole in the
pageblock, passing arbitrary position to pageblock_pfn_to_page() could
cause to skip whole pageblock scanning, instead of just skipping the
hole page. For deterministic behaviour, it's better to always pass
pageblock aligned range to pageblock_pfn_to_page(). It will also help
further optimization on pageblock_pfn_to_page() in the following patch.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
free_pfn and compact_cached_free_pfn are the pointer that remember
restart position of freepage scanner. When they are reset or invalid,
we set them to zone_end_pfn because freepage scanner works in reverse
direction. But, because zone range is defined as [zone_start_pfn,
zone_end_pfn), zone_end_pfn is invalid to access. Therefore, we should
not store it to free_pfn and compact_cached_free_pfn. Instead, we need
to store zone_end_pfn - 1 to them. There is one more thing we should
consider. Freepage scanner scan reversely by pageblock unit. If
free_pfn and compact_cached_free_pfn are set to middle of pageblock, it
regards that sitiation as that it already scans front part of pageblock
so we lose opportunity to scan there. To fix-up, this patch do
round_down() to guarantee that reset position will be pageblock aligned.
Note that thanks to the current pageblock_pfn_to_page() implementation,
actual access to zone_end_pfn doesn't happen until now. But, following
patch will change pageblock_pfn_to_page() so this patch is needed from
now on.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We define struct memblock_type *type in the memblock_add_region() and
memblock_reserve_region() functions only for passing it to the
memlock_add_range() and memblock_reserve_range() functions. Let's
remove these variables and will pass a type directly.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After one of bugfixes to freeze_page(), we don't have freezed pages in
rmap, therefore mapcount of all subpages of freezed THP is zero. And we
have assert for that.
Let's drop code which deal with non-zero mapcount of subpages.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_fault() assumes that PAGE_SIZE is the same as PAGE_CACHE_SIZE. Use
linear_page_index() to calculate pgoff in the correct units.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several users that nest lock_page_memcg() inside lock_page()
to prevent page->mem_cgroup from changing. But the page lock prevents
pages from moving between cgroups, so that is unnecessary overhead.
Remove lock_page_memcg() in contexts with locked contexts and fix the
debug code in the page stat functions to be okay with the page lock.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that migration doesn't clear page->mem_cgroup of live pages anymore,
it's safe to make lock_page_memcg() and the memcg stat functions take
pages, and spare the callers from memcg objects.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
