summaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+6
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
2019-03-21rhashtable: Still do rehash when we get EEXISTHerbert Xu1-2/+6
As it stands if a shrink is delayed because of an outstanding rehash, we will go into a rescheduling loop without ever doing the rehash. This patch fixes this by still carrying out the rehash and then rescheduling so that we can shrink after the completion of the rehash should it still be necessary. The return value of EEXIST captures this case and other cases (e.g., another thread expanded/rehashed the table at the same time) where we should still proceed with the rehash. Fixes: da20420f83ea ("rhashtable: Add nested tables") Reported-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-17Merge tag 'kbuild-v5.1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
2019-03-15Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+1
Pull ARM updates from Russell King: - An improvement from Ard Biesheuvel, who noted that the identity map setup was taking a long time due to flush_cache_louis(). - Update a comment about dma_ops from Wolfram Sang. - Remove use of "-p" with ld, where this flag has been a no-op since 2004. - Remove the printing of the virtual memory layout, which is no longer useful since we hide pointers. - Correct SCU help text. - Remove legacy TWD registration method. - Add pgprot_device() implementation for mapping PCI sysfs resource files. - Initialise PFN limits earlier for kmemleak. - Fix argument count to match macro definition (affects clang builds) - Use unified assembler language almost everywhere for clang, and other clang improvements (from Stefan Agner, Nathan Chancellor). - Support security extension for noMMU and other noMMU cleanups (from Vladimir Murzin). - Remove unnecessary SMP bringup code (which was incorrectly copy'n' pasted from the ARM platform implementations) and remove it from the arch code to discourge further copys of it appearing. - Add Cortex A9 erratum preventing kexec working on some SoCs. - AMBA bus identification updates from Mike Leach. - More use of raw spinlocks to avoid -RT kernel issues (from Yang Shi and Sebastian Andrzej Siewior). - MCPM hyp/svc mode mismatch fixes from Marek Szyprowski. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4 ARM: 8848/1: virt: Align GIC version check with arm64 counterpart ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used ARM: 8845/1: use unified assembler in c files ARM: 8844/1: use unified assembler in assembly files ARM: 8843/1: use unified assembler in headers ARM: 8841/1: use unified assembler in macros ARM: 8840/1: use a raw_spinlock_t in unwind ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI support ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight UCI values. ARM: 8838/1: drivers: amba: Updates to component identification for driver matching. ARM: 8833/1: Ensure that NEON code always compiles with Clang ARM: avoid Cortex-A9 livelock on tight dmb loops ARM: smp: remove arch-provided "pen_release" ARM: actions: remove boot_lock and pen_release ARM: oxnas: remove CPU hotplug implementation ARM: qcom: remove unnecessary boot_lock ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE} ARM: 8831/1: NOMMU: pmsa-v8: remove unneeded semicolon ...
2019-03-14libfdt: prefix header search paths with $(srctree)/Masahiro Yamada1-1/+1
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-12Merge branch 'work.iov_iter' of ↵Linus Torvalds1-2/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "A couple of iov_iter patches - Christoph's crapectomy (the last remaining user of iov_for_each() went away with lustre, IIRC) and Eric'c optimization of sanity checks" * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: optimize page_copy_sane() uio: remove the unused iov_for_each macro
2019-03-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-400/+223
Merge misc updates from Andrew Morton: - a few misc things - the rest of MM - remove flex_arrays, replace with new simple radix-tree implementation * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) Drop flex_arrays sctp: convert to genradix proc: commit to genradix generic radix trees selinux: convert to kvmalloc md: convert to kvmalloc openvswitch: convert to kvmalloc of: fix kmemleak crash caused by imbalance in early memory reservation mm: memblock: update comments and kernel-doc memblock: split checks whether a region should be skipped to a helper function memblock: remove memblock_{set,clear}_region_flags memblock: drop memblock_alloc_*_nopanic() variants memblock: memblock_alloc_try_nid: don't panic treewide: add checks for the return value of memblock_alloc*() swiotlb: add checks for the return value of memblock_alloc*() init/main: add checks for the return value of memblock_alloc*() mm/percpu: add checks for the return value of memblock_alloc*() sparc: add checks for the return value of memblock_alloc*() ia64: add checks for the return value of memblock_alloc*() arch: don't memset(0) memory returned by memblock_alloc() ...
2019-03-12Drop flex_arraysKent Overstreet2-399/+1
All existing users have been converted to generic radix trees Link: http://lkml.kernel.org/r/20181217131929.11727-8-kent.overstreet@gmail.com Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@parisplace.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12generic radix treesKent Overstreet2-1/+219
Very simple radix tree implementation that supports storing arbitrary size entries, up to PAGE_SIZE - upcoming patches will convert existing flex_array users to genradixes. The new genradix code has a much simpler API and implementation, and doesn't have a hard limit on the number of elements like flex_array does. Link: http://lkml.kernel.org/r/20181217131929.11727-5-kent.overstreet@gmail.com Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport1-0/+3
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-11Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds2-127/+324
Pull XArray updates from Matthew Wilcox: "This pull request changes the xa_alloc() API. I'm only aware of one subsystem that has started trying to use it, and we agree on the fixup as part of the merge. The xa_insert() error code also changed to match xa_alloc() (EEXIST to EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual bugfixes, optimisations and tweaking. I now have a git tree with all users of the radix tree and IDR converted over to the XArray that I'll be feeding to maintainers over the next few weeks" * tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_reserve for 2-byte aligned entries XArray: Fix xa_erase of 2-byte aligned entries XArray: Use xa_cmpxchg to implement xa_reserve XArray: Fix xa_release in allocating arrays XArray: Mark xa_insert and xa_reserve as must_check XArray: Add cyclic allocation XArray: Redesign xa_alloc API XArray: Add support for 1s-based allocation XArray: Change xa_insert to return -EBUSY XArray: Update xa_erase family descriptions XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-10Merge tag 'kbuild-v5.1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - do not generate unneeded top-level built-in.a - let git ignore O= directory entirely - optimize scripts/kallsyms slightly - exclude DWARF info from *.s regardless of config options - fix GCC toolchain search path for Clang to prepare ld.lld support - do not generate modules.order when CONFIG_MODULES is disabled - simplify single target rules and remove VPATH for external module build - allow to add optional flags to dpkg-buildpackage when building deb-pkg - move some compiler option tests from Makefile to Kconfig - various Makefile cleanups * tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: remove scripts/basic/% build target kbuild: use -Werror=implicit-... instead of -Werror-implicit-... kbuild: clean up scripts/gcc-version.sh kbuild: remove cc-version macro kbuild: update comment block of scripts/clang-version.sh kbuild: remove commented-out INITRD_COMPRESS kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig kbuild: [bin]deb-pkg: add DPKG_FLAGS variable kbuild: move ".config not found!" message from Kconfig to Makefile kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing kbuild: simplify single target rules kbuild: remove empty rules for makefiles kbuild: make -r/-R effective in top Makefile for old Make versions kbuild: move tools_silent to a more relevant place kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig kbuild: refactor cc-cross-prefix implementation kbuild: hardcode genksyms path and remove GENKSYMS variable scripts/gdb: refactor rules for symlink creation kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target scripts/gdb: do not descend into scripts/gdb from scripts ...
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-36/+0
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-10Merge tag 'arm64-upstream' of ↵Linus Torvalds2-14/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ...
2019-03-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-1/+27
Pull rdma updates from Jason Gunthorpe: "This has been a slightly more active cycle than normal with ongoing core changes and quite a lot of collected driver updates. - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe - A new data transfer mode for HFI1 giving higher performance - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR feature - A chip hang reset recovery system for hns - Change mm->pinned_vm to an atomic64 - Update bnxt_re to support a new 57500 chip - A sane netlink 'rdma link add' method for creating rxe devices and fixing the various unregistration race conditions in rxe's unregister flow - Allow lookup up objects by an ID over netlink - Various reworking of the core to driver interface: - drivers should not assume umem SGLs are in PAGE_SIZE chunks - ucontext is accessed via udata not other means - start to make the core code responsible for object memory allocation - drivers should convert struct device to struct ib_device via a helper - drivers have more tools to avoid use after unregister problems" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits) net/mlx5: ODP support for XRC transport is not enabled by default in FW IB/hfi1: Close race condition on user context disable and close RDMA/umem: Revert broken 'off by one' fix RDMA/umem: minor bug fix in error handling path RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp cxgb4: kfree mhp after the debug print IB/rdmavt: Fix concurrency panics in QP post_send and modify to error IB/rdmavt: Fix loopback send with invalidate ordering IB/iser: Fix dma_nents type definition IB/mlx5: Set correct write permissions for implicit ODP MR bnxt_re: Clean cq for kernel consumers only RDMA/uverbs: Don't do double free of allocated PD RDMA: Handle ucontext allocations by IB/core RDMA/core: Fix a WARN() message bnxt_re: fix the regression due to changes in alloc_pbl IB/mlx4: Increase the timeout for CM cache IB/core: Abort page fault handler silently during owning process exit IB/mlx5: Validate correct PD before prefetch MR IB/mlx5: Protect against prefetch of invalid MR RDMA/uverbs: Store PR pointer before it is overwritten ...
2019-03-09Merge tag 'printk-for-5.1' of ↵Linus Torvalds2-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to sort mixed lines by an extra information about the caller - Remove no longer used LOG_PREFIX. - Some clean up and documentation update. * tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk/docs: Add extra integer types to printk-formats printk: Remove no longer used LOG_PREFIX. lib/vsprintf: Remove %pCr remnant in comment printk: Pass caller information to log_store(). printk: Add caller information to printk() output.
2019-03-09Merge tag 'gcc-plugins-v5.1-rc1' of ↵Linus Torvalds3-0/+389
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins updates from Kees Cook: "This adds additional type coverage to the existing structleak plugin and adds a large set of selftests to help evaluate stack variable zero-initialization coverage. That can be used to test whatever instrumentation might be performing zero-initialization: either with the structleak plugin or with Clang's coming "-ftrivial-auto-var-init=zero" option. Summary: - Add scalar and array initialization coverage - Refactor Kconfig to make options more clear - Add self-test module for testing automatic initialization" * tag 'gcc-plugins-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib: Introduce test_stackinit module gcc-plugins: structleak: Generalize to all variable types
2019-03-08Merge branch 'for-linus' of ↵Linus Torvalds10-1/+686
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Jiri Kosina: - support for something we call 'atomic replace', and allows for much better handling of cumulative patches (which is something very useful for distros), from Jason Baron with help of Petr Mladek and Joe Lawrence - improvement of handling of tasks blocking finalization, from Miroslav Benes - update of MAINTAINERS file to reflect move towards group maintainership * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits) livepatch/selftests: use "$@" to preserve argument list livepatch: Module coming and going callbacks can proceed with all listed patches livepatch: Proper error handling in the shadow variables selftest livepatch: return -ENOMEM on ptr_id() allocation failure livepatch: Introduce klp_for_each_patch macro livepatch: core: Return EOPNOTSUPP instead of ENOSYS selftests/livepatch: add DYNAMIC_DEBUG config dependency livepatch: samples: non static warnings fix livepatch: update MAINTAINERS livepatch: Remove signal sysfs attribute livepatch: Send a fake signal periodically selftests/livepatch: introduce tests livepatch: Remove ordering (stacking) of the livepatches livepatch: Atomic replace and cumulative patches documentation livepatch: Remove Nop structures when unused livepatch: Add atomic replace livepatch: Use lists to manage patches, objects and functions livepatch: Simplify API by removing registration step livepatch: Don't block the removal of patches loaded after a forced transition livepatch: Consolidate klp_free functions ...
2019-03-07lib/lzo: separate lzo-rle from lzoDave Rodgman2-10/+35
To prevent any issues with persistent data, separate lzo-rle from lzo so that it is treated as a separate algorithm, and lzo is still available. Link: http://lkml.kernel.org/r/20190205155944.16007-3-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: implement run-length encodingDave Rodgman3-35/+152
Patch series "lib/lzo: run-length encoding support", v5. Following on from the previous lzo-rle patchset: https://lkml.org/lkml/2018/11/30/972 This patchset contains only the RLE patches, and should be applied on top of the non-RLE patches ( https://lkml.org/lkml/2019/2/5/366 ). Previously, some questions were raised around the RLE patches. I've done some additional benchmarking to answer these questions. In short: - RLE offers significant additional performance (data-dependent) - I didn't measure any regressions that were clearly outside the noise One concern with this patchset was around performance - specifically, measuring RLE impact separately from Matt Sealey's patches (CTZ & fast copy). I have done some additional benchmarking which I hope clarifies the benefits of each part of the patchset. Firstly, I've captured some memory via /dev/fmem from a Chromebook with many tabs open which is starting to swap, and then split this into 4178 4k pages. I've excluded the all-zero pages (as zram does), and also the no-zero pages (which won't tell us anything about RLE performance). This should give a realistic test dataset for zram. What I found was that the data is VERY bimodal: 44% of pages in this dataset contain 5% or fewer zeros, and 44% contain over 90% zeros (30% if you include the no-zero pages). This supports the idea of special-casing zeros in zram. Next, I've benchmarked four variants of lzo on these pages (on 64-bit Arm at max frequency): baseline LZO; baseline + Matt Sealey's patches (aka MS); baseline + RLE only; baseline + MS + RLE. Numbers are for weighted roundtrip throughput (the weighting reflects that zram does more compression than decompression). https://drive.google.com/file/d/1VLtLjRVxgUNuWFOxaGPwJYhl_hMQXpHe/view?usp=sharing Matt's patches help in all cases for Arm (and no effect on Intel), as expected. RLE also behaves as expected: with few zeros present, it makes no difference; above ~75%, it gives a good improvement (50 - 300 MB/s on top of the benefit from Matt's patches). Best performance is seen with both MS and RLE patches. Finally, I have benchmarked the same dataset on an x86-64 device. Here, the MS patches make no difference (as expected); RLE helps, similarly as on Arm. There were no definite regressions; allowing for observational error, 0.1% (3/4178) of cases had a regression > 1 standard deviation, of which the largest was 4.6% (1.2 standard deviations). I think this is probably within the noise. https://drive.google.com/file/d/1xCUVwmiGD0heEMx5gcVEmLBI4eLaageV/view?usp=sharing One point to note is that the graphs show RLE appears to help very slightly with no zeros present! This is because the extra code causes the clang optimiser to change code layout in a way that happens to have a significant benefit. Taking baseline LZO and adding a do-nothing line like "__builtin_prefetch(out_len);" immediately before the "goto next" has the same effect. So this is a real, but basically spurious effect - it's small enough not to upset the overall findings. This patch (of 3): When using zram, we frequently encounter long runs of zero bytes. This adds a special case which identifies runs of zeros and encodes them using run-length encoding. This is faster for both compression and decompresion. For high-entropy data which doesn't hit this case, impact is minimal. Compression ratio is within a few percent in all cases. This modifies the bitstream in a way which is backwards compatible (i.e., we can decompress old bitstreams, but old versions of lzo cannot decompress new bitstreams). Link: http://lkml.kernel.org/r/20190205155944.16007-2-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: fast 8-byte copy on arm64Matt Sealey1-1/+1
Enable faster 8-byte copies on arm64. Link: http://lkml.kernel.org/r/20181127161913.23863-6-dave.rodgman@arm.com Link: http://lkml.kernel.org/r/20190205141950.9058-4-dave.rodgman@arm.com Signed-off-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: 64-bit CTZ on arm64Matt Sealey1-1/+1
LZO leaves some performance on the table by not realising that arm64 can optimize count-trailing-zeros bit operations. Add CONFIG_ARM64 to the checked definitions alongside CONFIG_X86_64 to enable the use of rbit/clz instructions on full 64-bit quantities. Link: http://lkml.kernel.org/r/20181127161913.23863-5-dave.rodgman@arm.com Link: http://lkml.kernel.org/r/20190205141950.9058-3-dave.rodgman@arm.com Signed-off-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/lzo: tidy-up ifdefsDave Rodgman1-4/+4
Patch series "lib/lzo: performance improvements", v5. This patch (of 3): Modify the ifdefs in lzodefs.h to be more consistent with normal kernel macros (e.g., change __aarch64__ to CONFIG_ARM64). Link: http://lkml.kernel.org/r/20190205141950.9058-2-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/ubsan: default UBSAN_ALIGNMENT to not setAnders Roxell1-5/+9
When booting an allmodconfig kernel, there are a lot of false-positives. With a message like this 'UBSAN: Undefined behaviour in...' with a call trace that follows. UBSAN warnings are a result of enabling noisy CONFIG_UBSAN_ALIGNMENT which is disabled by default if HAVE_EFFICIENT_UNALIGNED_ACCESS=y. It's noisy even if don't have efficient unaligned access, e.g. people often add __cacheline_aligned_in_smp in structs, but forget to align allocations of such struct (kmalloc() give 8-byte alignment in worst case). Rework so that when building a allmodconfig kernel that turns everything into '=m' or '=y' will turn off UBSAN_ALIGNMENT. [aryabinin@virtuozzo.com: changelog addition] Link: http://lkml.kernel.org/r/20181217150326.30933-1-anders.roxell@linaro.org Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/test_firmware.c: remove some dead codeDan Carpenter1-9/+0
The test_fw_config->reqs allocation succeeded so these addresses can't be NULL. Also on the second error path, we forgot to set "rc = -ENOMEM;". Link: http://lkml.kernel.org/r/20190221183700.GA1737@kadam Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/assoc_array.c: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: lib/assoc_array.c: In function `assoc_array_delete': lib/assoc_array.c:1110:3: warning: this statement may fall through [-Wimplicit-fallthrough=] for (slot = 0; slot < ASSOC_ARRAY_FAN_OUT; slot++) { ^~~ lib/assoc_array.c:1118:2: note: here case assoc_array_walk_tree_empty: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Link: http://lkml.kernel.org/r/20190212212206.GA16378@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/test_ubsan.c: VLA no longer used in kernelOlof Johansson1-10/+1
Since we now build with -Wvla, any use of VLA throws a warning. Including this test, so... maybe we should just remove the test? lib/test_ubsan.c: In function 'test_ubsan_vla_bound_not_positive': lib/test_ubsan.c:48:2: warning: ISO C90 forbids variable length array 'buf' [-Wvla] For the out-of-bounds test, switch to non-VLA setup. lib/test_ubsan.c: In function 'test_ubsan_out_of_bounds': lib/test_ubsan.c:64:2: warning: ISO C90 forbids variable length array 'arr' [-Wvla] Link: http://lkml.kernel.org/r/20190113183210.56154-1-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/div64.c: off by one in shiftStanislaw Gruszka1-2/+2
fls counts bits starting from 1 to 32 (returns 0 for zero argument). If we add 1 we shift right one bit more and loose precision from divisor, what cause function incorect results with some numbers. Corrected code was tested in user-space, see bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202391 Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com Fixes: 658716d19f8f ("div64_u64(): improve precision on 32bit platforms") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reported-by: Siarhei Volkau <lis8215@gmail.com> Tested-by: Siarhei Volkau <lis8215@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: move pr_err from module.c to ddebug_add_moduleRasmus Villemoes1-1/+3
This serves two purposes: First, we get a diagnostic if (though extremely unlikely), any of the calls of ddebug_add_module for built-in code fails, effectively disabling dynamic_debug. Second, I want to make struct _ddebug opaque, and avoid accessing any of its members outside dynamic_debug.[ch]. Link: http://lkml.kernel.org/r/20190212214150.4807-9-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: remove unused EXPORT_SYMBOLsRasmus Villemoes1-2/+0
The only caller of ddebug_{add,remove}_module outside dynamic_debug.c is kernel/module.c, which is obviously not itself modular (though it would be an interesting exercise to make that happen...). I also fail to see how these interfaces can be used by modules, in-tree or not. Link: http://lkml.kernel.org/r/20190212214150.4807-8-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: use pointer comparison in ddebug_remove_moduleRasmus Villemoes1-1/+2
Now that we store the passed-in string directly in ddebug_add_module, we can use pointer equality instead of strcmp. This is a little more efficient, but more importantly, this also makes the code somewhat more correct: Currently, if one loads and then unloads a module whose name happens to match the KBUILD_MODNAME of some built-in functionality (which need not even be modular at all), all of their dynamic debug entries vanish along with those of the actual module. For example, loading and unloading a core.ko hides all pr_debugs from drivers/base/core.c and other built-in files called core.c (incidentally, there is an in-tree module whose name is core, but I just tested this with an out-of-tree trivial one). Link: http://lkml.kernel.org/r/20190212214150.4807-7-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07dynamic_debug: don't duplicate modname in ddebug_add_moduleRasmus Villemoes1-8/+7
For built-in modules, we're already reusing the passed-in string via kstrdup_const(). But for actual modules (i.e. when we're called from dynamic_debug_setup in module.c), the passed-in string (which points at the name[] array inside struct module) is also guaranteed to live at least as long as the struct ddebug_table, since free_module() calls ddebug_remove_module(). Link: http://lkml.kernel.org/r/20190212214150.4807-6-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07lib/vsprintf.c: move sizeof(struct printf_spec) next to its definitionRasmus Villemoes1-2/+3
At the time of commit d048419311ff ("lib/vsprintf.c: expand field_width to 24 bits"), there was no compiletime_assert/BUILD_BUG/.... variant that could be used outside function scope. Now we have static_assert(), so move the assertion next to the definition instead of hiding it in some arbitrary function. Also add the appropriate #include to avoid relying on build_bug.h being pulled in via some arbitrary chain of includes. Link: http://lkml.kernel.org/r/20190208203015.29702-2-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06Merge tag 'driver-core-5.1-rc1' of ↵Linus Torvalds3-9/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ...
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds2-5/+136
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-03-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds6-53/+567
Merge misc updates from Andrew Morton: - a few misc things - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits) tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include proc: more robust bulk read test proc: test /proc/*/maps, smaps, smaps_rollup, statm proc: use seq_puts() everywhere proc: read kernel cpu stat pointer once proc: remove unused argument in proc_pid_lookup() fs/proc/thread_self.c: code cleanup for proc_setup_thread_self() fs/proc/self.c: code cleanup for proc_setup_self() proc: return exit code 4 for skipped tests mm,mremap: bail out earlier in mremap_to under map pressure mm/sparse: fix a bad comparison mm/memory.c: do_fault: avoid usage of stale vm_area_struct writeback: fix inode cgroup switching comment mm/huge_memory.c: fix "orig_pud" set but not used mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC mm/memcontrol.c: fix bad line in comment mm/cma.c: cma_declare_contiguous: correct err handling mm/page_ext.c: fix an imbalance with kmemleak mm/compaction: pass pgdat to too_many_isolated() instead of zone mm: remove zone_lru_lock() function, access ->lru_lock directly ...
2019-03-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Lots of tooling updates - too many to list, here's a few highlights: - Various subcommand updates to 'perf trace', 'perf report', 'perf record', 'perf annotate', 'perf script', 'perf test', etc. - CPU and NUMA topology and affinity handling improvements, - HW tracing and HW support updates: - Intel PT updates - ARM CoreSight updates - vendor HW event updates - BPF updates - Tons of infrastructure updates, both on the build system and the library support side - Documentation updates. - ... and lots of other changes, see the changelog for details. Kernel side updates: - Tighten up kprobes blacklist handling, reduce the number of places where developers can install a kprobe and hang/crash the system. - Fix/enhance vma address filter handling. - Various PMU driver updates, small fixes and additions. - refcount_t conversions - BPF updates - error code propagation enhancements - misc other changes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits) perf script python: Add Python3 support to syscall-counts-by-pid.py perf script python: Add Python3 support to syscall-counts.py perf script python: Add Python3 support to stat-cpi.py perf script python: Add Python3 support to stackcollapse.py perf script python: Add Python3 support to sctop.py perf script python: Add Python3 support to powerpc-hcalls.py perf script python: Add Python3 support to net_dropmonitor.py perf script python: Add Python3 support to mem-phys-addr.py perf script python: Add Python3 support to failed-syscalls-by-pid.py perf script python: Add Python3 support to netdev-times.py perf tools: Add perf_exe() helper to find perf binary perf script: Handle missing fields with -F +.. perf data: Add perf_data__open_dir_data function perf data: Add perf_data__(create_dir|close_dir) functions perf data: Fail check_backup in case of error perf data: Make check_backup work over directories perf tools: Add rm_rf_perf_data function perf tools: Add pattern name checking to rm_rf perf tools: Add depth checking to rm_rf perf data: Add global path holder ...
2019-03-06Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The biggest part of this tree is the new auto-generated atomics API wrappers by Mark Rutland. The primary motivation was to allow instrumentation without uglifying the primary source code. The linecount increase comes from adding the auto-generated files to the Git space as well: include/asm-generic/atomic-instrumented.h | 1689 ++++++++++++++++-- include/asm-generic/atomic-long.h | 1174 ++++++++++--- include/linux/atomic-fallback.h | 2295 +++++++++++++++++++++++++ include/linux/atomic.h | 1241 +------------ I preferred this approach, so that the full call stack of the (already complex) locking APIs is still fully visible in 'git grep'. But if this is excessive we could certainly hide them. There's a separate build-time mechanism to determine whether the headers are out of date (they should never be stale if we do our job right). Anyway, nothing from this should be visible to regular kernel developers. Other changes: - Add support for dynamic keys, which removes a source of false positives in the workqueue code, among other things (Bart Van Assche) - Updates to tools/memory-model (Andrea Parri, Paul E. McKenney) - qspinlock, wake_q and lockdep micro-optimizations (Waiman Long) - misc other updates and enhancements" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) locking/lockdep: Shrink struct lock_class_key locking/lockdep: Add module_param to enable consistency checks lockdep/lib/tests: Test dynamic key registration lockdep/lib/tests: Fix run_tests.sh kernel/workqueue: Use dynamic lockdep keys for workqueues locking/lockdep: Add support for dynamic keys locking/lockdep: Verify whether lock objects are small enough to be used as class keys locking/lockdep: Check data structure consistency locking/lockdep: Reuse lock chains that have been freed locking/lockdep: Fix a comment in add_chain_cache() locking/lockdep: Introduce lockdep_next_lockchain() and lock_chain_count() locking/lockdep: Reuse list entries that are no longer in use locking/lockdep: Free lock classes that are no longer in use locking/lockdep: Update two outdated comments locking/lockdep: Make it easy to detect whether or not inside a selftest locking/lockdep: Split lockdep_free_key_range() and lockdep_reset_lock() locking/lockdep: Initialize the locks_before and locks_after lists earlier locking/lockdep: Make zap_class() remove all matching lock order entries locking/lockdep: Reorder struct lock_class members locking/lockdep: Avoid that add_chain_cache() adds an invalid chain to the cache ...
2019-03-05mm/page_owner: move config option to mm/Kconfig.debugChangbin Du1-17/+0
Move the PAGE_OWNER option from submenu "Compile-time checks and compiler options" to dedicated submenu "Memory Debugging". Link: http://lkml.kernel.org/r/20190120024254.6270-1-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05vmalloc: add test driver to analyse vmalloc allocatorUladzislau Rezki (Sony)3-0/+565
This adds a new kernel module for analysis of vmalloc allocator. It is only enabled as a module. There are two main reasons this module should be used for: performance evaluation and stressing of vmalloc subsystem. It consists of several test cases. As of now there are 8. The module has five parameters we can specify to change its the behaviour. 1) run_test_mask - set of tests to be run id: 1, name: fix_size_alloc_test id: 2, name: full_fit_alloc_test id: 4, name: long_busy_list_alloc_test id: 8, name: random_size_alloc_test id: 16, name: fix_align_alloc_test id: 32, name: random_size_align_alloc_test id: 64, name: align_shift_alloc_test id: 128, name: pcpu_alloc_test By default all tests are in run test mask. If you want to select some specific tests it is possible to pass the mask. For example for first, second and fourth tests we go 11 value. 2) test_repeat_count - how many times each test should be repeated By default it is one time per test. It is possible to pass any number. As high the value is the test duration gets increased. 3) test_loop_count - internal test loop counter. By default it is set to 1000000. 4) single_cpu_test - use one CPU to run the tests By default this parameter is set to false. It means that all online CPUs execute tests. By setting it to 1, the tests are executed by first online CPU only. 5) sequential_test_order - run tests in sequential order By default this parameter is set to false. It means that before running tests the order is shuffled. It is possible to make it sequential, just set it to 1. Performance analysis: In order to evaluate performance of vmalloc allocations, usually it makes sense to use only one CPU that runs tests, use sequential order, number of repeat tests can be different as well as set of test mask. For example if we want to run all tests, to use one CPU and repeat each test 3 times. Insert the module passing following parameters: single_cpu_test=1 sequential_test_order=1 test_repeat_count=3 with following output: <snip> Summary: fix_size_alloc_test passed: 3 failed: 0 repeat: 3 loops: 1000000 avg: 901177 usec Summary: full_fit_alloc_test passed: 3 failed: 0 repeat: 3 loops: 1000000 avg: 1039341 usec Summary: long_busy_list_alloc_test passed: 3 failed: 0 repeat: 3 loops: 1000000 avg: 11775763 usec Summary: random_size_alloc_test passed 3: failed: 0 repeat: 3 loops: 1000000 avg: 6081992 usec Summary: fix_align_alloc_test passed: 3 failed: 0 repeat: 3, loops: 1000000 avg: 2003712 usec Summary: random_size_align_alloc_test passed: 3 failed: 0 repeat: 3 loops: 1000000 avg: 2895689 usec Summary: align_shift_alloc_test passed: 0 failed: 3 repeat: 3 loops: 1000000 avg: 573 usec Summary: pcpu_alloc_test passed: 3 failed: 0 repeat: 3 loops: 1000000 avg: 95802 usec All test took CPU0=192945605995 cycles <snip> The align_shift_alloc_test is expected to be failed. Stressing: In order to stress the vmalloc subsystem we run all available test cases on all available CPUs simultaneously. In order to prevent constant behaviour pattern, the test cases array is shuffled by default to randomize the order of test execution. For example if we want to run all tests(default), use all online CPUs(default) with shuffled order(default) and to repeat each test 30 times. The command would be like: modprobe vmalloc_test test_repeat_count=30 Expected results are the system is alive, there are no any BUG_ONs or Kernel Panics the tests are completed, no memory leaks. [urezki@gmail.com: fix 32-bit builds] Link: http://lkml.kernel.org/r/20190106214839.ffvjvmrn52uqog7k@pc636 [urezki@gmail.com: make CONFIG_TEST_VMALLOC depend on CONFIG_MMU] Link: http://lkml.kernel.org/r/20190219085441.s6bg2gpy4esny5vw@pc636 Link: http://lkml.kernel.org/r/20190103142108.20744-3-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05mm: replace all open encodings for NUMA_NO_NODEAnshuman Khandual1-1/+2
Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05kasan: remove use after scope bugs detection.Andrey Ryabinin3-35/+0
Use after scope bugs detector seems to be almost entirely useless for the linux kernel. It exists over two years, but I've seen only one valid bug so far [1]. And the bug was fixed before it has been reported. There were some other use-after-scope reports, but they were false-positives due to different reasons like incompatibility with structleak plugin. This feature significantly increases stack usage, especially with GCC < 9 version, and causes a 32K stack overflow. It probably adds performance penalty too. Given all that, let's remove use-after-scope detector entirely. While preparing this patch I've noticed that we mistakenly enable use-after-scope detection for clang compiler regardless of CONFIG_KASAN_EXTRA setting. This is also fixed now. [1] http://lkml.kernel.org/r/<20171129052106.rhgbjhhis53hkgfn@wfg-t540p.sh.intel.com> Link: http://lkml.kernel.org/r/20190111185842.13978-1-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Will Deacon <will.deacon@arm.com> [arm64] Cc: Qian Cai <cai@lca.pw> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+22
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+2
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-03-04 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP support to libbpf. Rationale is to facilitate writing AF_XDP applications by offering higher-level APIs that hide many of the details of the AF_XDP uapi. Sample programs are converted over to this new interface as well, from Magnus. 2) Introduce a new cant_sleep() macro for annotation of functions that cannot sleep and use it in BPF_PROG_RUN() to assert that BPF programs run under preemption disabled context, from Peter. 3) Introduce per BPF prog stats in order to monitor the usage of BPF; this is controlled by kernel.bpf_stats_enabled sysctl knob where monitoring tools can make use of this to efficiently determine the average cost of programs, from Alexei. 4) Split up BPF selftest's test_progs similarly as we already did with test_verifier. This allows to further reduce merge conflicts in future and to get more structure into our quickly growing BPF selftest suite, from Stanislav. 5) Fix a bug in BTF's dedup algorithm which can cause an infinite loop in some circumstances; also various BPF doc fixes and improvements, from Andrii. 6) Various BPF sample cleanups and migration to libbpf in order to further isolate the old sample loader code (so we can get rid of it at some point), from Jakub. 7) Add a new BPF helper for BPF cgroup skb progs that allows to set ECN CE code point and a Host Bandwidth Manager (HBM) sample program for limiting the bandwidth used by v2 cgroups, from Lawrence. 8) Enable write access to skb->queue_mapping from tc BPF egress programs in order to let BPF pick TX queue, from Jesper. 9) Fix a bug in BPF spinlock handling for map-in-map which did not propagate spin_lock_off to the meta map, from Yonghong. 10) Fix a bug in the new per-CPU BPF prog counters to properly initialize stats for each CPU, from Eric. 11) Add various BPF helper prototypes to selftest's bpf_helpers.h, from Willem. 12) Fix various BPF samples bugs in XDP and tracing progs, from Toke, Daniel and Yonghong. 13) Silence preemption splat in test_bpf after BPF_PROG_RUN() enforces it now everywhere, from Anders. 14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to get error handling working, from Dan. 15) Fix bpftool documentation and auto-completion with regards to stream_{verdict,parser} attach types, from Alban. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04lib: Introduce test_stackinit moduleKees Cook3-0/+389
Adds test for stack initialization coverage. We have several build options that control the level of stack variable initialization. This test lets us visualize which options cover which cases, and provide tests for some of the pathological padding conditions the compiler will sometimes fail to initialize. All options pass the explicit initialization cases and the partial initializers (even with padding): test_stackinit: u8_zero ok test_stackinit: u16_zero ok test_stackinit: u32_zero ok test_stackinit: u64_zero ok test_stackinit: char_array_zero ok test_stackinit: small_hole_zero ok test_stackinit: big_hole_zero ok test_stackinit: trailing_hole_zero ok test_stackinit: packed_zero ok test_stackinit: small_hole_dynamic_partial ok test_stackinit: big_hole_dynamic_partial ok test_stackinit: trailing_hole_dynamic_partial ok test_stackinit: packed_dynamic_partial ok test_stackinit: small_hole_static_partial ok test_stackinit: big_hole_static_partial ok test_stackinit: trailing_hole_static_partial ok test_stackinit: packed_static_partial ok test_stackinit: packed_static_all ok test_stackinit: packed_dynamic_all ok test_stackinit: packed_runtime_all ok The results of the other tests (which contain no explicit initialization), change based on the build's configured compiler instrumentation. No options: test_stackinit: small_hole_static_all FAIL (uninit bytes: 3) test_stackinit: big_hole_static_all FAIL (uninit bytes: 61) test_stackinit: trailing_hole_static_all FAIL (uninit bytes: 7) test_stackinit: small_hole_dynamic_all FAIL (uninit bytes: 3) test_stackinit: big_hole_dynamic_all FAIL (uninit bytes: 61) test_stackinit: trailing_hole_dynamic_all FAIL (uninit bytes: 7) test_stackinit: small_hole_runtime_partial FAIL (uninit bytes: 23) test_stackinit: big_hole_runtime_partial FAIL (uninit bytes: 127) test_stackinit: trailing_hole_runtime_partial FAIL (uninit bytes: 24) test_stackinit: packed_runtime_partial FAIL (uninit bytes: 24) test_stackinit: small_hole_runtime_all FAIL (uninit bytes: 3) test_stackinit: big_hole_runtime_all FAIL (uninit bytes: 61) test_stackinit: trailing_hole_runtime_all FAIL (uninit bytes: 7) test_stackinit: u8_none FAIL (uninit bytes: 1) test_stackinit: u16_none FAIL (uninit bytes: 2) test_stackinit: u32_none FAIL (uninit bytes: 4) test_stackinit: u64_none FAIL (uninit bytes: 8) test_stackinit: char_array_none FAIL (uninit bytes: 16) test_stackinit: switch_1_none FAIL (uninit bytes: 8) test_stackinit: switch_2_none FAIL (uninit bytes: 8) test_stackinit: small_hole_none FAIL (uninit bytes: 24) test_stackinit: big_hole_none FAIL (uninit bytes: 128) test_stackinit: trailing_hole_none FAIL (uninit bytes: 32) test_stackinit: packed_none FAIL (uninit bytes: 32) test_stackinit: user FAIL (uninit bytes: 32) test_stackinit: failures: 25 CONFIG_GCC_PLUGIN_STRUCTLEAK_USER=y This only tries to initialize structs with __user markings, so only the difference from above is now the "user" test passes: test_stackinit: small_hole_static_all FAIL (uninit bytes: 3) test_stackinit: big_hole_static_all FAIL (uninit bytes: 61) test_stackinit: trailing_hole_static_all FAIL (uninit bytes: 7) test_stackinit: small_hole_dynamic_all FAIL (uninit bytes: 3) test_stackinit: big_hole_dynamic_all FAIL (uninit bytes: 61) test_stackinit: trailing_hole_dynamic_all FAIL (uninit bytes: 7) test_stackinit: small_hole_runtime_partial FAIL (uninit bytes: 23) test_stackinit: big_hole_runtime_partial FAIL (uninit bytes: 127) test_stackinit: trailing_hole_runtime_partial FAIL (uninit bytes: 24) test_stackinit: packed_runtime_partial FAIL (uninit bytes: 24) test_stackinit: small_hole_runtime_all FAIL (uninit bytes: 3) test_stackinit: big_hole_runtime_all FAIL (uninit bytes: 61) test_stackinit: trailing_hole_runtime_all FAIL (uninit bytes: 7) test_stackinit: u8_none FAIL (uninit bytes: 1) test_stackinit: u16_none FAIL (uninit bytes: 2) test_stackinit: u32_none FAIL (uninit bytes: 4) test_stackinit: u64_none FAIL (uninit bytes: 8) test_stackinit: char_array_none FAIL (uninit bytes: 16) test_stackinit: switch_1_none FAIL (uninit bytes: 8) test_stackinit: switch_2_none FAIL (uninit bytes: 8) test_stackinit: small_hole_none FAIL (uninit bytes: 24) test_stackinit: big_hole_none FAIL (uninit bytes: 128) test_stackinit: trailing_hole_none FAIL (uninit bytes: 32) test_stackinit: packed_none FAIL (uninit bytes: 32) test_stackinit: user ok test_stackinit: failures: 24 CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF=y This initializes all structures passed by reference (scalars and strings remain uninitialized): test_stackinit: small_hole_static_all ok test_stackinit: big_hole_static_all ok test_stackinit: trailing_hole_static_all ok test_stackinit: small_hole_dynamic_all ok test_stackinit: big_hole_dynamic_all ok test_stackinit: trailing_hole_dynamic_all ok test_stackinit: small_hole_runtime_partial ok test_stackinit: big_hole_runtime_partial ok test_stackinit: trailing_hole_runtime_partial ok test_stackinit: packed_runtime_partial ok test_stackinit: small_hole_runtime_all ok test_stackinit: big_hole_runtime_all ok test_stackinit: trailing_hole_runtime_all ok test_stackinit: u8_none FAIL (uninit bytes: 1) test_stackinit: u16_none FAIL (uninit bytes: 2) test_stackinit: u32_none FAIL (uninit bytes: 4) test_stackinit: u64_none FAIL (uninit bytes: 8) test_stackinit: char_array_none FAIL (uninit bytes: 16) test_stackinit: switch_1_none FAIL (uninit bytes: 8) test_stackinit: switch_2_none FAIL (uninit bytes: 8) test_stackinit: small_hole_none ok test_stackinit: big_hole_none ok test_stackinit: trailing_hole_none ok test_stackinit: packed_none ok test_stackinit: user ok test_stackinit: failures: 7 CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y This initializes all variables, so it matches above with the scalars and arrays included: test_stackinit: small_hole_static_all ok test_stackinit: big_hole_static_all ok test_stackinit: trailing_hole_static_all ok test_stackinit: small_hole_dynamic_all ok test_stackinit: big_hole_dynamic_all ok test_stackinit: trailing_hole_dynamic_all ok test_stackinit: small_hole_runtime_partial ok test_stackinit: big_hole_runtime_partial ok test_stackinit: trailing_hole_runtime_partial ok test_stackinit: packed_runtime_partial ok test_stackinit: small_hole_runtime_all ok test_stackinit: big_hole_runtime_all ok test_stackinit: trailing_hole_runtime_all ok test_stackinit: u8_none ok test_stackinit: u16_none ok test_stackinit: u32_none ok test_stackinit: u64_none ok test_stackinit: char_array_none ok test_stackinit: switch_1_none ok test_stackinit: switch_2_none ok test_stackinit: small_hole_none ok test_stackinit: big_hole_none ok test_stackinit: trailing_hole_none ok test_stackinit: packed_none ok test_stackinit: user ok test_stackinit: all tests passed! Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-03-01kasan: turn off asan-stack for clang-8 and earlierArnd Bergmann1-0/+22
Building an arm64 allmodconfig kernel with clang results in over 140 warnings about overly large stack frames, the worst ones being: drivers/gpu/drm/panel/panel-sitronix-st7789v.c:196:12: error: stack frame size of 20224 bytes in function 'st7789v_prepare' drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c:196:12: error: stack frame size of 13120 bytes in function 'td028ttec1_panel_enable' drivers/usb/host/max3421-hcd.c:1395:1: error: stack frame size of 10048 bytes in function 'max3421_spi_thread' drivers/net/wan/slic_ds26522.c:209:12: error: stack frame size of 9664 bytes in function 'slic_ds26522_probe' drivers/crypto/ccp/ccp-ops.c:2434:5: error: stack frame size of 8832 bytes in function 'ccp_run_cmd' drivers/media/dvb-frontends/stv0367.c:1005:12: error: stack frame size of 7840 bytes in function 'stv0367ter_algo' None of these happen with gcc today, and almost all of these are the result of a single known issue in llvm. Hopefully it will eventually get fixed with the clang-9 release. In the meantime, the best idea I have is to turn off asan-stack for clang-8 and earlier, so we can produce a kernel that is safe to run. I have posted three patches that address the frame overflow warnings that are not addressed by turning off asan-stack, so in combination with this change, we get much closer to a clean allmodconfig build, which in turn is necessary to do meaningful build regression testing. It is still possible to turn on the CONFIG_ASAN_STACK option on all versions of clang, and it's always enabled for gcc, but when CONFIG_COMPILE_TEST is set, the option remains invisible, so allmodconfig and randconfig builds (which are normally done with a forced CONFIG_COMPILE_TEST) will still result in a mostly clean build. Link: http://lkml.kernel.org/r/20190222222950.3997333-1-arnd@arndb.de Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Qian Cai <cai@lca.pw> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28lib/raid6: arm: optimize away a mask operation in NEON recovery routineArd Biesheuvel1-6/+6
The NEON recovery code was modeled after the x86 SIMD code, and for some reason, that code uses a 16 bit wide signed shift and a mask to perform what amounts to a 8 bit unsigned shift. So fold the ops together. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-28lib/raid6: use vdupq_n_u8 to avoid endianness warningsndesaulniers@google.com2-8/+4
Clang warns: vector initializers are not compatible with NEON intrinsics in big endian mode [-Wnonportable-vector-initialization] While this is usually the case, it's not an issue for this case since we're initializing the uint8x16_t (16x uint8_t's) with the same value. Instead, use vdupq_n_u8 which both compilers lower into a single movi instruction: https://godbolt.org/z/vBrgzt This avoids the static storage for a constant value. Link: https://github.com/ClangBuiltLinux/linux/issues/214 Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-28kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to KconfigMasahiro Yamada1-0/+2
CONFIG_DEBUG_INFO_SPLIT and CONFIG_DEBUG_INFO_DWARF4 enable extra dwarf options if supported. You never know if they are really enabled since Makefile may silently turn them off. The actual behavior will match to the kernel configuration by testing those compiler flags in the Kconfig stage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-28lib/vsprintf: Remove %pCr remnant in commentGeert Uytterhoeven1-1/+0
Support for "%pCr" was removed, but a reference in a comment was forgotten. Fixes: 666902e42fd8344b ("lib/vsprintf: Remove atomic-unsafe support for %pCr") Link: http://lkml.kernel.org/r/20190228105315.744-1-geert+renesas@glider.be To: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Petr Mladek <pmladek@suse.com>