summaryrefslogtreecommitdiffstats
path: root/fs/udf/udf_sb.h
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31udf: Cleanup metadata flags handlingJan Kara1-2/+4
Use simple ->s_flags variable instead of u8 variable for each flag. Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31udf: Skip mirror metadata FE loading when metadata FE is okNamjae Jeon1-0/+1
It is not necessary to load mirror metadata FE when metadata FE is OK. So try to read it only the first time udf_get_pblock_meta25() fails to map the block from metadata FE. Signed-off-by: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06udf: Protect default inode credentials by rwlockJan Kara1-0/+2
Superblock carries credentials (uid, gid, etc.) which are used as default values in __udf_read_inode() when media does not provide these. These credentials can change during remount so we protect them by a rwlock so that each inode gets a consistent set of credentials. Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-06udf: Convert UDF_SB(sb)->s_flags to use bitopsJan Kara1-4/+16
Use atomic bitops to manipulate with sb flags to make manipulation safe without any locking. Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02udf: Don't write integrity descriptor too oftenJan Kara1-0/+2
We update information in logical volume integrity descriptor after each allocation (as LVID contains free space, number of directories and files on disk etc.). If the filesystem is on some phase change media, this leads to its quick degradation as such media is able to handle only 10000 overwrites or so. We solve the problem by writing new information into LVID only on umount, remount-ro and sync. This solves the problem at the price of longer media inconsistency (previously media became consistent after pdflush flushed dirty LVID buffer) but that should be acceptable. Report by and patch written in cooperation with Rich Coe <Richard.Coe@med.ge.com>. Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02udf: Try anchor in block 256 firstJan Kara1-1/+1
Anchor block can be located at several places on the medium. Two of the locations are relative to media end which is problematic to detect. Also some drives report some block as last but are not able to read it or any block nearby before it. So let's first try block 256 and if it is all fine, don't look at other possible locations of anchor blocks to avoid IO errors. This change required a larger reorganization of code but the new code is hopefully more readable and definitely shorter. Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02udf: use hardware sector sizeClemens Ladisch1-0/+1
This patch makes the UDF FS driver use the hardware sector size as the default logical block size, which is required by the UDF specifications. While the previous default of 2048 bytes was correct for optical disks, it was not for hard disks or USB storage devices, and made it impossible to use such a device with the default mount options. (The Linux mkudffs tool uses a default block size of 2048 bytes even on devices with smaller hardware sectors, so this bug is unlikely to be noticed unless UDF-formatted USB storage devices are exchanged with other OSs.) To avoid regressions for people who use loopback optical disk images or who used the (sometimes wrong) defaults of mkudffs, we also try with a block size of 2048 bytes if no anchor was found with the hardware sector size. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02udf: fix default mode and dmode options handlingMarcin Slusarz1-0/+2
On x86 (and several other archs) mode_t is defined as "unsigned short" and comparing unsigned shorts to negative ints is broken (because short is promoted to int and then compared). Fix it. Reported-and-tested-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02udf: implement mode and dmode mounting optionsMarcin Slusarz1-0/+2
"dmode" allows overriding permissions of directories and "mode" allows overriding permissions of files. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: Add read-only support for 2.50 UDF mediaJan Kara1-1/+15
This patch implements parsing of metadata partitions and reading of Metadata File thus allowing to read UDF 2.50 media. Error resilience is implemented through accessing the Metadata Mirror File in case the data the Metadata File cannot be read. The patch is based on the original patch by Sebastian Manciulea <manciuleas@yahoo.com> and Mircea Fedoreanu <mirceaf_spl@yahoo.com>. Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com> Signed-off-by: Mircea Fedoreanu <mirceaf_spl@yahoo.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: Cleanup anchor block detection.Jan Kara1-1/+1
UDF anchor block detection is complicated by several things - there are several places where the anchor point can be, some of them relative to the last recorded block which some devices report wrongly. Moreover some devices on some media seem to have 7 spare blocks sectors for every 32 blocks (at least as far as I understand the old code) so we have to count also with that possibility. This patch splits anchor block detection into several functions so that it is clearer what we actually try to do. We fix several bugs of the type "for such and such media, we fail to check block blah" as a result of the cleanup. Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: move headers out include/linux/Christoph Hellwig1-0/+93
There's really no reason to keep udf headers in include/linux as they're not used by anything but fs/udf/. This patch merges most of include/linux/udf_fs_i.h into fs/udf/udf_i.h, include/linux/udf_fs_sb.h into fs/udf/udf_sb.h and include/linux/udf_fs.h into fs/udf/udfdecl.h. The only thing remaining in include/linux/ is a stub of udf_fs_i.h defining the four user-visible udf ioctls. It's also moved from unifdef-y to headers-y because it can be included unconditionally now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2008-02-08mount options: fix udfMiklos Szeredi1-0/+2
Add a .show_options super operation to udf. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: move calculating of nr_groups into helper functionMarcin Slusarz1-0/+2
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: convert macros related to bitmaps to functionsMarcin Slusarz1-38/+0
convert UDF_SB_ALLOC_BITMAP macro to udf_sb_alloc_bitmap function convert UDF_SB_FREE_BITMAP macro to udf_sb_free_bitmap function Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: convert UDF_SB_ALLOC_PARTMAPS macro to udf_sb_alloc_partition_maps functionMarcin Slusarz1-13/+0
- convert UDF_SB_ALLOC_PARTMAPS macro to udf_sb_alloc_partition_maps function - convert kmalloc + memset to kcalloc - check if kcalloc failed (partially) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: remove some ugly macrosMarcin Slusarz1-55/+20
remove macros: - UDF_SB_PARTMAPS - UDF_SB_PARTTYPE - UDF_SB_PARTROOT - UDF_SB_PARTLEN - UDF_SB_PARTVSN - UDF_SB_PARTNUM - UDF_SB_TYPESPAR - UDF_SB_TYPEVIRT - UDF_SB_PARTFUNC - UDF_SB_PARTFLAGS - UDF_SB_VOLIDENT - UDF_SB_NUMPARTS - UDF_SB_PARTITION - UDF_SB_SESSION - UDF_SB_ANCHOR - UDF_SB_LASTBLOCK - UDF_SB_LVIDBH - UDF_SB_LVID - UDF_SB_UMASK - UDF_SB_GID - UDF_SB_UID - UDF_SB_RECORDTIME - UDF_SB_SERIALNUM - UDF_SB_UDFREV - UDF_SB_FLAGS - UDF_SB_VAT - UDF_UPDATE_UDFREV - UDF_SB_FREE and open code them convert UDF_SB_LVIDIU macro to udf_sb_lvidiu function rename some struct udf_sb_info fields: - s_volident to s_volume_ident - s_lastblock to s_last_block - s_lvidbh to s_lvid_bh - s_recordtime to s_record_time - s_serialnum to s_serial_number; - s_vat to s_vat_inode; Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31UDF: fix UID and GID mount option ignoranceCyrill Gorcunov1-0/+2
This patch fix weird behaviour of UDF mounting procedure. To get UID changed (for now) we have to type mount -t udf -o uid=some_user,uid=ignore /dev/device /mnt/moun_point and specifying two uid at once is strange a bit. So with the patch we are able to mount without additional 'uid=ignore' option. The same for GID option is done. This patch will not break current mount scheme (with two option). Btw this does fix (I hope) the following [BUG 6124] mount of UDF fs ignores UID and GID options http://bugzilla.kernel.org/show_bug.cgi?id=6124 Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael <auslands-kv@gmx.de> Cc: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21UDF: coding style conversion - lindent fixupsCyrill Gorcunov1-17/+9
This patch fixes up sources after conversion by Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19UDF: coding style conversion - lindentCyrill Gorcunov1-3/+3
This patch converts UDF coding style to kernel coding style using Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08udf: use get_bh()Jan Kara1-1/+1
Make UDF use get_bh() instead of directly accessing b_count and use brelse() instead of udf_release_data() which does just brelse()... Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-03-08[PATCH] udf: fix uid/gid options and add uid/gid=ignore and forget optionsPhillip Susi1-0/+4
Fix a bug in udf where it would write uid/gid = 0 to the disk for files owned by the id given with the uid=/gid= mount options. It also adds 4 new mount options: uid/gid=forget and uid/gid=ignore. Without any options the id in core and on disk always match. Giving uid/gid=nnn specifies a default ID to be used in core when the on disk ID is -1. uid/gid=ignore forces the in core ID to allways be used no matter what the on disk ID is. uid/gid=forget forces the on disk ID to always be written out as -1. The use of these options allows you to override ownerships on a disk or disable ownwership information from being written, allowing the media to be used portably between different computers and possibly different users without permissions issues that would require root to correct. Signed-off-by: Phillip Susi <psusi@cfl.rr.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] kfree cleanup: fsJesper Juhl1-2/+1
This is the fs/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in fs/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+139
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 14:54:12 +0000