summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/aops.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-09ocfs2: fix deadlock due to wrong locking orderJunxiao Bi1-7/+8
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it will wait until jbd2 commit thread done. In order journal mode, jbd2 needs flushing dirty data pages first, and this needs get page lock. So osb->journal->j_trans_barrier should be got before page lock. But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this locking order, and this will cause deadlock and hung the whole cluster. One deadlock catched is the following: PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle" #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2] #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2] #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2] #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2] #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2] #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2] #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2] #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142 RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206 RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400 ORIG_RAX: 000000000000004d CS: 0033 SS: 002b crash64> bt PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt" #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2] #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2] #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2] #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2] #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284 crash64> bt PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86" #0 [ffff88100def3920] __schedule at ffffffff8150a524 #1 [ffff88100def39c8] schedule at ffffffff8150acbf #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a #5 [ffff88100def3a58] __lock_page at ffffffff81110687 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2] #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2] #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2] #11 [ffff88100def3ee8] kthread at ffffffff81090db6 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Alex Chen <alex.chen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06switch {__,}blockdev_direct_IO() to iov_iterAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06pass iov_iter to ->direct_IO()Al Viro1-4/+3
unmodified, for now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-03ocfs2: improve fsync efficiency and fix deadlock between aio_write and sync_fileDarrick J. Wong1-0/+1
Currently, ocfs2_sync_file grabs i_mutex and forces the current journal transaction to complete. This isn't terribly efficient, since sync_file really only needs to wait for the last transaction involving that inode to complete, and this doesn't require i_mutex. Therefore, implement the necessary bits to track the newest tid associated with an inode, and teach sync_file to wait for that instead of waiting for everything in the journal to commit. Furthermore, only issue the flush request to the drive if jbd2 hasn't already done so. This also eliminates the deadlock between ocfs2_file_aio_write() and ocfs2_sync_file(). aio_write takes i_mutex then calls ocfs2_aiodio_wait() to wait for unaligned dio writes to finish. However, if that dio completion involves calling fsync, then we can get into trouble when some ocfs2_sync_file tries to take i_mutex. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: change ip_unaligned_aio to of type mutex from atomit_tWengang Wang1-5/+1
There is a problem that waitqueue_active() may check stale data thus miss a wakeup of threads waiting on ip_unaligned_aio. The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to be of type mutex thus the above prolem is avoid. Another benifit is that mutex which works as FIFO is fairer than wake_up_all(). Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: simplify ocfs2_invalidatepage() and ocfs2_releasepage()Jan Kara1-17/+2
Ocfs2 doesn't do data journalling. Thus its ->invalidatepage and ->releasepage functions never get called on buffers that have journal heads attached. So just use standard variants of functions from buffer.c. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: fix possible double free in ocfs2_write_begin_nolockXue jiufei1-2/+6
When ocfs2_write_cluster_by_desc() failed in ocfs2_write_begin_nolock() because of ENOSPC, it goes to out_quota, freeing data_ac(meta_ac). Then it calls ocfs2_try_to_free_truncate_log() to free space. If enough space freed, it will try to write again. Unfortunately, some error happenes before ocfs2_lock_allocators(), it goes to out and free data_ac(meta_ac) again. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: return ENOMEM when sb_getblk() failsRui Xiang1-0/+2
The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So return ENOMEM instead when it fails. [joseph.qi@huawei.com: ocfs2_symlink_get_block() and ocfs2_read_blocks_sync() and ocfs2_read_blocks() need the same change] Signed-off-by: Rui Xiang <rui.xiang@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13fs/ocfs2: remove unnecessary variable bits_wanted from ocfs2_calc_extend_creditsGoldwyn Rodrigues1-2/+1
Code cleanup to remove unnecessary variable passed but never used to ocfs2_calc_extend_credits. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11ocfs2: use i_size_read() to access i_sizeJunxiao Bi1-1/+1
Though ocfs2 uses inode->i_mutex to protect i_size, there are both i_size_read/write() and direct accesses. Clean up all direct access to eliminate confusion. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-04direct-io: Implement generic deferred AIO completionsChristoph Hellwig1-7/+1
Add support to the core direct-io code to defer AIO completions to user context using a workqueue. This replaces opencoded and less efficient code in XFS and ext4 (we save a memory allocation for each direct IO) and will be needed to properly support O_(D)SYNC for AIO. The communication between the filesystem and the direct I/O code requires a new buffer head flag, which is a bit ugly but not avoidable until the direct I/O code stops abusing the buffer_head structure for communicating with the filesystems. Currently this creates a per-superblock unbound workqueue for these completions, which is taken from an earlier patch by Jan Kara. I'm not really convinced about this use and would prefer a "normal" global workqueue with a high concurrency limit, but this needs further discussion. JK: Fixed ext4 part, dynamic allocation of the workqueue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-13ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_pageTiger Yang1-1/+1
Since ocfs2_cow_file_pos will invoke ocfs2_refcount_icow with a NULL as the struct file pointer, it finally result in a null pointer dereference in ocfs2_duplicate_clusters_by_page. This patch replace file pointer with inode pointer in cow_duplicate_clusters to fix this issue. [jeff.liu@oracle.com: rebased patch against linux-next tree] Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Tao Ma <tm@tao.ma> Tested-by: David Weber <wb@munzinger.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-21ocfs2: use ->invalidatepage() length argumentLukas Czerner1-2/+1
->invalidatepage() aop now accepts range to invalidate so we can make use of it in ocfs2_invalidatepage(). Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Joel Becker <jlbec@evilplan.org>
2013-05-21jbd2: change jbd2_journal_invalidatepage to accept lengthLukas Czerner1-1/+2
invalidatepage now accepts range to invalidate and there are two file system using jbd2 also implementing punch hole feature which can benefit from this. We need to implement the same thing for jbd2 layer in order to allow those file system take benefit of this functionality. This commit adds length argument to the jbd2_journal_invalidatepage() and updates all instances in ext4 and ocfs2. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-21mm: change invalidatepage prototype to accept lengthLukas Czerner1-1/+2
Currently there is no way to truncate partial page where the end truncate point is not at the end of the page. This is because it was not needed and the functionality was enough for file system truncate operation to work properly. However more file systems now support punch hole feature and it can benefit from mm supporting truncating page just up to the certain point. Specifically, with this functionality truncate_inode_pages_range() can be changed so it supports truncating partial page at the end of the range (currently it will BUG_ON() if 'end' is not at the end of the page). This commit changes the invalidatepage() address space operation prototype to accept range to be invalidated and update all the instances for it. We also change the block_invalidatepage() in the same way and actually make a use of the new length argument implementing range invalidation. Actual file system implementations will follow except the file systems where the changes are really simple and should not change the behaviour in any way .Implementation for truncate_page_range() which will be able to accept page unaligned ranges will follow as well. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26ocfs2: fix possible use-after-free with AIOJan Kara1-1/+1
Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-21ocfs2: wait for page writeback to provide stable pagesJan Kara1-0/+1
When stable pages are required, we have to wait if the page is just going to disk and we want to modify it. Add proper callback to ocfs2_grab_pages_for_write(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20ocfs2: remove the second argument of k[un]map_atomic()Cong Wang1-8/+8
Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Cong Wang <amwang@redhat.com>
2011-08-21Merge branch 'mw-3.1-jul25' of git://oss.oracle.com/git/smushran/linux-2.6 ↵Joel Becker1-14/+47
into ocfs2-fixes
2011-07-28ocfs2: Avoid livelock in ocfs2_readpage()Jan Kara1-0/+8
When someone writes to an inode, readers accessing the same inode via ocfs2_readpage() just busyloop trying to get ip_alloc_sem because do_generic_file_read() looks up the page again and retries ->readpage() when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough readers, they can occupy all CPUs and in non-preempt kernel the system is deadlocked because writer holding ip_alloc_sem is never run to release the semaphore. Fix the problem by making reader block on ip_alloc_sem to break the busy loop. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-07-28ocfs2: serialize unaligned aioMark Fasheh1-0/+10
Fix a corruption that can happen when we have (two or more) outstanding aio's to an overlapping unaligned region. Ext4 (e9e3bcecf44c04b9e6b505fd8e2eb9cea58fb94d) and xfs recently had to fix similar issues. In our case what happens is that we can have an outstanding aio on a region and if a write comes in with some bytes overlapping the original aio we may decide to read that region into a page before continuing (typically because of buffered-io fallback). Since we have no ordering guarantees with the aio, we can read stale or bad data into the page and then write it back out. If the i/o is page and block aligned, then we avoid this issue as there won't be any need to read data from disk. I took the same approach as Eric in the ext4 patch and introduced some serialization of unaligned async direct i/o. I don't expect this to have an effect on the most common cases of AIO. Unaligned aio will be slower though, but that's far more acceptable than data corruption. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-07-24ocfs2: Fix ocfs2_page_mkwrite()Wengang Wang1-8/+43
This patch address two shortcomings in ocfs2_page_mkwrite(): 1. Makes the function return better VM_FAULT_* errors. 2. It handles a error that is triggered when a page is dropped from the mapping due to memory pressure. This patch locks the page to prevent that. [Patch was cleaned up by Sunil Mushran.] Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2011-07-20fs: move inode_dio_done to the end_io handlerChristoph Hellwig1-0/+1
For filesystems that delay their end_io processing we should keep our i_dio_count until the the processing is done. Enable this by moving the inode_dio_done call to the end_io handler if one exist. Note that the actual move to the workqueue for ext4 and XFS is not done in this patch yet, but left to the filesystem maintainers. At least for XFS it's not needed yet either as XFS has an internal equivalent to i_dio_count. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20fs: always maintain i_dio_countChristoph Hellwig1-3/+1
Maintain i_dio_count for all filesystems, not just those using DIO_LOCKING. This these filesystems to also protect truncate against direct I/O requests by using common code. Right now the only non-DIO_LOCKING filesystem that appears to do so is XFS, which uses an opencoded variant of the i_dio_count scheme. Behaviour doesn't change for filesystems never calling inode_dio_wait. For ext4 behaviour changes when using the dioread_nonlock option, which previously was missing any protection between truncate and direct I/O reads. For ocfs2 that handcrafted i_dio_count manipulations are replaced with the common code now enable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20fs: kill i_alloc_semChristoph Hellwig1-4/+3
i_alloc_sem is a rather special rw_semaphore. It's the last one that may be released by a non-owner, and it's write side is always mirrored by real exclusion. It's intended use it to wait for all pending direct I/O requests to finish before starting a truncate. Replace it with a hand-grown construct: - exclusion for truncates is already guaranteed by i_mutex, so it can simply fall way - the reader side is replaced by an i_dio_count member in struct inode that counts the number of pending direct I/O requests. Truncate can't proceed as long as it's non-zero - when i_dio_count reaches non-zero we wake up a pending truncate using wake_up_bit on a new bit in i_flags - new references to i_dio_count can't appear while we are waiting for it to read zero because the direct I/O count always needs i_mutex (or an equivalent like XFS's i_iolock) for starting a new operation. This scheme is much simpler, and saves the space of a spinlock_t and a struct list_head in struct inode (typically 160 bits on a non-debug 64-bit system). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-28Merge branch 'upstream-linus' of ↵Linus Torvalds1-43/+39
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits) Treat writes as new when holes span across page boundaries fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS. ocfs2/dlm: Move kmalloc() outside the spinlock ocfs2: Make the left masklogs compat. ocfs2: Remove masklog ML_AIO. ocfs2: Remove masklog ML_UPTODATE. ocfs2: Remove masklog ML_BH_IO. ocfs2: Remove masklog ML_JOURNAL. ocfs2: Remove masklog ML_EXPORT. ocfs2: Remove masklog ML_DCACHE. ocfs2: Remove masklog ML_NAMEI. ocfs2: Remove mlog(0) from fs/ocfs2/dir.c ocfs2: remove NAMEI from symlink.c ocfs2: Remove masklog ML_QUOTA. ocfs2: Remove mlog(0) from quota_local.c. ocfs2: Remove masklog ML_RESERVATIONS. ocfs2: Remove masklog ML_XATTR. ocfs2: Remove masklog ML_SUPER. ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c ... Fix up trivial conflict in fs/ocfs2/super.c
2011-03-28Treat writes as new when holes span across page boundariesGoldwyn Rodrigues1-0/+6
When a hole spans across page boundaries, the next write forces a read of the block. This could end up reading existing garbage data from the disk in ocfs2_map_page_blocks. This leads to non-zero holes. In order to avoid this, mark the writes as new when the holes span across page boundaries. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: jlbec <jlbec@evilplan.org>
2011-03-10block: remove per-queue pluggingJens Axboe1-1/+0
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-22ocfs2: Remove mlog(0) from fs/ocfs2/aops.cTao Ma1-26/+29
Remove all the "mlog(0," in fs/ocfs2/aops.c. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07ocfs2: Remove EXIT from masklog.Tao Ma1-15/+4
mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21ocfs2: Remove ENTRY from masklog.Tao Ma1-9/+7
ENTRY is used to record the entry of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. So for mlog_entry_void, we just remove it. for mlog_entry(...), we replace it with mlog(0,...), and they will be replace by trace event later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-01-11Merge branch 'upstream-linus' of ↵Linus Torvalds1-1/+58
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits) MAINTAINERS: Update Joel Becker's email address ocfs2: Remove unused truncate function from alloc.c ocfs2/cluster: dereferencing before checking in nst_seq_show() ocfs2: fix build for OCFS2_FS_STATS not enabled ocfs2/cluster: Show o2net timing statistics ocfs2/cluster: Track process message timing stats for each socket ocfs2/cluster: Track send message timing stats for each socket ocfs2/cluster: Use ktime instead of timeval in struct o2net_sock_container ocfs2/cluster: Replace timeval with ktime in struct o2net_send_tracking ocfs2: Add DEBUG_FS dependency ocfs2/dlm: Hard code the values for enums ocfs2/dlm: Minor cleanup ocfs2/dlm: Cleanup dlmdebug.c ocfs2: Release buffer_head in case of error in ocfs2_double_lock. ocfs2/cluster: Pin the local node when o2hb thread starts ocfs2/cluster: Show pin state for each o2hb region ocfs2/cluster: Pin/unpin o2hb regions ocfs2/cluster: Remove dropped region from o2hb quorum region bitmap ocfs2/cluster: Pin the remote node item in configfs ocfs2/dlm: make existing convertion precedent over new lock ...
2010-12-16ocfs2: Try to free truncate log when meeting ENOSPC in write.Tao Ma1-1/+58
Recently, one of our colleagues meet with a problem that if we write/delete a 32mb files repeatly, we will get an ENOSPC in the end. And the corresponding bug is 1288. http://oss.oracle.com/bugzilla/show_bug.cgi?id=1288 The real problem is that although we have freed the clusters, they are in truncate log and they will be summed up so that we can free them once in a whole. So this patch just try to resolve it. In case we see -ENOSPC in ocfs2_write_begin_no_lock, we will check whether the truncate log has enough clusters for our need, if yes, we will try to flush the truncate log at that point and try again. This method is inspired by Mark Fasheh <mfasheh@suse.com>. Thanks. Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-12-09Ocfs2: Teach 'coherency=full' O_DIRECT writes to correctly up_read i_alloc_sem.Tristan Ye1-2/+5
Due to newly-introduced 'coherency=full' O_DIRECT writes also takes the EX rw_lock like buffered writes did(rw_level == 1), it turns out messing the usage of 'level' in ocfs2_dio_end_io() up, which caused i_alloc_sem being failed to get up_read'd correctly. This patch tries to teach ocfs2_dio_end_io to understand well on all locking stuffs by explicitly introducing a new bit for i_alloc_sem in iocb's private data, just like what we did for rw_lock. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-10-25fs: kill block_prepare_writeChristoph Hellwig1-17/+2
__block_write_begin and block_prepare_write are identical except for slightly different calling conventions. Convert all callers to the __block_write_begin calling conventions and drop block_prepare_write. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-09-10Merge branch 'cow_readahead' of git://oss.oracle.com/git/tma/linux-2.6 into ↵Joel Becker1-3/+4
merge-2
2010-09-10Reorganize data elements to reduce struct sizesGoldwyn Rodrigues1-1/+1
Thanks for the comments. I have incorportated them all. CONFIG_OCFS2_FS_STATS is enabled and CONFIG_DEBUG_LOCK_ALLOC is disabled. Statistics now look like - ocfs2_write_ctxt: 2144 - 2136 = 8 ocfs2_inode_info: 1960 - 1848 = 112 ocfs2_journal: 168 - 160 = 8 ocfs2_lock_res: 336 - 304 = 32 ocfs2_refcount_tree: 512 - 472 = 40 Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-08-12ocfs2: Add struct file to ocfs2_refcount_cow.Tao Ma1-1/+1
Add a new parameter 'struct file *' to ocfs2_refcount_cow so that we can add readahead support later. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-08-12ocfs2: pass struct file* to ocfs2_write_begin_nolock.Tao Ma1-2/+3
struct file * has file_ra_state to store the readahead state and data. So pass this to ocfs2_write_begin_nolock so that it can be used in ocfs2_refcount_cow. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-08-09sort out blockdev_direct_IO variantsChristoph Hellwig1-5/+4
Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-07-26direct-io: move aio_complete into ->end_ioChristoph Hellwig1-1/+6
Filesystems with unwritten extent support must not complete an AIO request until the transaction to convert the extent has been commited. That means the aio_complete calls needs to be moved into the ->end_io callback so that the filesystem can control when to call it exactly. This makes a bit of a mess out of dio_complete and the ->end_io callback prototype even more complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-07-12ocfs2: No need to zero pages past i_size.Joel Becker1-4/+18
When ocfs2 fills a hole, it does so by allocating clusters. When a cluster is larger than the write, ocfs2 must zero the portions of the cluster outside of the write. If the clustersize is smaller than a pagecache page, this is handled by the normal pagecache mechanisms, but when the clustersize is larger than a page, ocfs2's write code will zero the pages adjacent to the write. This makes sure the entire cluster is zeroed correctly. Currently ocfs2 behaves exactly the same when writing past i_size. However, this means ocfs2 is writing zeroed pages for portions of a new cluster that are beyond i_size. The page writeback code isn't expecting this. It treats all pages past the one containing i_size as left behind due to a previous truncate operation. Thankfully, ocfs2 calculates the number of pages it will be working on up front. The rest of the write code merely honors the original calculation. We can simply trim the number of pages to only cover the actual file data. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-08ocfs2: Zero the tail cluster when extending past i_size.Joel Becker1-14/+28
ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in order to ensure future i_size growth will see cleared blocks. Unfortunately, block_write_full_page() drops the pages past i_size. This means that ocfs2 is actually leaking garbage data into the tail end of that last cluster. This is a bug. We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect when a write or truncate is past i_size. They will use ocfs2_zero_extend() to ensure the data is properly zeroed. Older versions of ocfs2_zero_extend() simply zeroed every block between i_size and the zeroing position. This presumes three things: 1) There is allocation for all of these blocks. 2) The extents are not unwritten. 3) The extents are not refcounted. (1) and (2) hold true for non-sparse filesystems, which used to be the only users of ocfs2_zero_extend(). (3) is another bug. Since we're now using ocfs2_zero_extend() for sparse filesystems as well, we teach ocfs2_zero_extend() to check every extent between i_size and the zeroing position. If the extent is unwritten, it is ignored. If it is refcounted, it is CoWed. Then it is zeroed. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-08ocfs2: When zero extending, do it by page.Joel Becker1-30/+0
ocfs2_zero_extend() does its zeroing block by block, but it calls a function named ocfs2_write_zero_page(). Let's have ocfs2_write_zero_page() handle the page level. From ocfs2_zero_extend()'s perspective, it is now page-at-a-time. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-05-05ocfs2: use allocation reservations during file writeMark Fasheh1-0/+3
Add a per-inode reservations structure and pass it through to the reservations code. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2010-03-05Merge branch 'for_linus' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits) quota: stop using QUOTA_OK / NO_QUOTA dquot: cleanup dquot initialize routine dquot: move dquot initialization responsibility into the filesystem dquot: cleanup dquot drop routine dquot: move dquot drop responsibility into the filesystem dquot: cleanup dquot transfer routine dquot: move dquot transfer responsibility into the filesystem dquot: cleanup inode allocation / freeing routines dquot: cleanup space allocation / freeing routines ext3: add writepage sanity checks ext3: Truncate allocated blocks if direct IO write fails to update i_size quota: Properly invalidate caches even for filesystems with blocksize < pagesize quota: generalize quota transfer interface quota: sb_quota state flags cleanup jbd: Delay discarding buffers in journal_unmap_buffer ext3: quota_write cross block boundary behaviour quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota quota: split out compat_sys_quotactl support from quota.c quota: split out netlink notification support from quota.c quota: remove invalid optimization from quota_sync_all ... Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05dquot: cleanup space allocation / freeing routinesChristoph Hellwig1-5/+6
Get rid of the alloc_space, free_space, reserve_space, claim_space and release_rsv dquot operations - they are always called from the filesystem and if a filesystem really needs their own (which none currently does) it can just call into it's own routine directly. Move shared logic into the common __dquot_alloc_space, dquot_claim_space_nodirty and __dquot_free_space low-level methods, and rationalize the wrappers around it to move as much as possible code into the common block for CONFIG_QUOTA vs not. Also rename all these helpers to be named dquot_* instead of vfs_dq_*. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-02-26ocfs2: Only bug out in direct io write for reflinked extent.Tao Ma1-2/+3
In ocfs2_direct_IO_get_blocks, we only need to bug out in case of we are going to write a recounted extent rec. What a silly bug introduced by me! Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org