summaryrefslogtreecommitdiffstats
path: root/fs/nilfs2
AgeCommit message (Collapse)AuthorFilesLines
2011-07-20->permission() sanitizing: don't pass flags to generic_permission()Al Viro1-1/+1
redundant; all callers get it duplicated in mask & MAY_NOT_BLOCK and none of them removes that bit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20kill check_acl callback of generic_permission()Al Viro1-1/+1
its value depends only on inode and does not change; we might as well store it in ->i_op->check_acl and be done with that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-20nilfs2_permission() doesn't need to bail out in RCU modeAl Viro1-6/+1
Nothing blocking except for generic_permission(). Which will DTRT. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-11nilfs2: fix problem in setting checkpoint intervalRyusuke Konishi1-1/+1
Checkpoint generation interval of nilfs goes wrong after user has changed the interval parameter with nilfs-tune tool. segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds segctord starting. Construction interval = 0 seconds, CP frequency < 30 seconds This turned out to be caused by a trivial bug in initialization code of log writer. This will fix it. Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-06-11nilfs2: fix missing block address termination in btree node shrinkingRyusuke Konishi1-7/+14
nilfs_btree_delete function does not terminate part of virtual block addresses when shrinking the last remaining child node into the root node. The missing address termination causes that dead btree node blocks persist and chip away free disk space. This fixes the leak bug on the btree node deletion. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-06-11nilfs2: fix incorrect block address termination in node concatenationRyusuke Konishi1-5/+13
nilfs_btree_delete function wrongly terminates virtual block address of the btree node held by its parent at index 0. When concatenating the index-0 node with its right sibling node, nilfs_btree_delete terminates the block address of index-0 node instead of the right sibling node which should be deleted. This bug not only wears disk space in the long run, but also causes file system corruption. This will fix it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-28nilfs2: remove unnecessary dentry_unhash from rmdir, dir renameSage Weil1-5/+0
nilfs2 does not have problems with references to unlinked directories. CC: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> CC: linux-nilfs@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-27fs: pass exact type of data dirties to ->dirty_inodeChristoph Hellwig2-2/+2
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or anything else, so that the filesystem can track internally if it needs to push out a transaction for fdatasync or not. This is just the prototype change with no user for it yet. I plan to push large XFS changes for the next merge window, and getting this trivial infrastructure in this window would help a lot to avoid tree interdependencies. Also remove incorrect comments that ->dirty_inode can't block. That has been changed a long time ago, and many implementations rely on it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (25 commits) cifs: remove unnecessary dentry_unhash on rmdir/rename_dir ocfs2: remove unnecessary dentry_unhash on rmdir/rename_dir exofs: remove unnecessary dentry_unhash on rmdir/rename_dir nfs: remove unnecessary dentry_unhash on rmdir/rename_dir ext2: remove unnecessary dentry_unhash on rmdir/rename_dir ext3: remove unnecessary dentry_unhash on rmdir/rename_dir ext4: remove unnecessary dentry_unhash on rmdir/rename_dir btrfs: remove unnecessary dentry_unhash in rmdir/rename_dir ceph: remove unnecessary dentry_unhash calls vfs: clean up vfs_rename_other vfs: clean up vfs_rename_dir vfs: clean up vfs_rmdir vfs: fix vfs_rename_dir for FS_RENAME_DOES_D_MOVE filesystems libfs: drop unneeded dentry_unhash vfs: update dentry_unhash() comment vfs: push dentry_unhash on rename_dir into file systems vfs: push dentry_unhash on rmdir into file systems vfs: remove dget() from dentry_unhash() vfs: dentry_unhash immediately prior to rmdir vfs: Block mmapped writes while the fs is frozen ...
2011-05-26vfs: push dentry_unhash on rename_dir into file systemsSage Weil1-0/+3
Only a few file systems need this. Start by pushing it down into each rename method (except gfs2 and xfs) so that it can be dealt with on a per-fs basis. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-26vfs: push dentry_unhash on rmdir into file systemsSage Weil1-0/+2
Only a few file systems need this. Start by pushing it down into each fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs basis. This does not change behavior for any in-tree file systems. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-10nilfs2: use mark_buffer_dirty to mark btnode or meta data dirtyRyusuke Konishi15-86/+63
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty, an own mark buffer dirty function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: always set back pointer to host inode in mapping->hostRyusuke Konishi8-36/+14
In the current nilfs, page cache for btree nodes and meta data files do not set a valid back pointer to the host inode in mapping->host. This will change it so that every address space in nilfs uses mapping->host to hold its host inode. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: get rid of NILFS_I_NILFSRyusuke Konishi7-22/+20
This replaces all references of NILFS_I_NILFS(inode)->ns_bdev with inode->i_sb->s_bdev and unfolds remaining uses of NILFS_I_NILFS inline function. Before 2.6.37, referring to a nilfs object from inodes needed a conditional judgement, and NILFS_I_NILFS was helpful to simplify it. But now we can simply do it by going through a super block instance like inode->i_sb->s_fs_info. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: use list_first_entryRyusuke Konishi2-8/+8
This uses list_first_entry macro instead of list_entry if it's used to get the first entry. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: use empty_aops for gc-inodesRyusuke Konishi1-4/+1
Applies empty_aops for address space operations of gc-inodes. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: implement resize ioctlRyusuke Konishi7-5/+189
This adds resize ioctl which makes online resize possible. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: add truncation routine of segment usage fileRyusuke Konishi1-0/+112
When shrinking the filesystem, segments to be truncated must be test if they are busy or not, and unneeded sufile block should be deleted. This adds routines for the truncation. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: add routine to move secondary super blockRyusuke Konishi1-0/+57
After resizing the filesystem, the secondary super block must be moved to a new location. This adds a helper function for this. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: add ioctl which limits range of segment to be allocatedRyusuke Konishi3-10/+98
This adds a new ioctl command which limits range of segment to be allocated. This is intended to gather data whithin a range of the partition before shrinking the filesystem, or to control new log location for some purpose. If a range is specified by the ioctl, segment allocator of nilfs tries to allocate new segments from the range unless no free segments are available there. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: zero fill unused portion of super root blockRyusuke Konishi2-2/+15
The super root block is newly-allocated each time it is written back to disk, so unused portion of the block should be cleared. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: super root size should change depending on inode sizeRyusuke Konishi2-2/+5
The size of super root structure depends on inode size, so NILFS_SR_BYTES macro should be a function of the inode size. This fixes the issue. Even though a different size value will be written for a possible future filesystem with extended inode, but fortunately this does not break disk format compatibility. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: get rid of private page allocatorRyusuke Konishi6-207/+18
Previously, nilfs was cloning pages for mmapped region to freeze their data and ensure consistency of checksum during writeback cycles. A private page allocator was used for this page cloning. But, we no longer need to do that since clear_page_dirty_for_io function sets up pte so that vm_ops->page_mkwrite function is called right before the mmapped pages are modified and nilfs_page_mkwrite function can safely wait for the pages to be written back to disk. So, this stops making a copy of mmapped pages during writeback, and eliminates the private page allocation and deallocation functions from nilfs. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: merge list_del()/list_add_tail() to list_move_tail()Nicolas Kaiser2-6/+3
Merge list_del() + list_add_tail() to list_move_tail(). Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: fix infinite loop in nilfs_palloc_freev functionRyusuke Konishi1-1/+1
After having applied commit 9954e7af14868b8b ("nilfs2: add free entries count only if clear bit operation succeeded"), a free routine of nilfs came to fall into an infinite loop, outputting the same message endlessly: nilfs_palloc_freev: entry number 29497 already freed nilfs_palloc_freev: entry number 29497 already freed nilfs_palloc_freev: entry number 29497 already freed nilfs_palloc_freev: entry number 29497 already freed nilfs_palloc_freev: entry number 29497 already freed ... That patch broke the routine so that a loop counter is never updated in an abnormal state. This fixes the regression. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-04-05fs: export empty_aopsJens Axboe1-2/+0
With the ->sync_page() hook gone, we have a few users that add their own static address_space_operations without any functions defined. fs/inode.c already has an empty_aops that it uses for init purposes. Lets export that and use it in the places where an otherwise empty aops was defined. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-30nilfs2: fix whitespace coding style issuesNicolas Kaiser1-7/+7
Fixes whitespace coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-30nilfs2: fix oops due to a bad aops initializationRyusuke Konishi1-1/+3
Nilfs in 2.6.39-rc1 hit the following oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffff810ac235>] try_to_release_page+0x2a/0x3d PGD 234cb6067 PUD 234c72067 PMD 0 Oops: 0000 [#1] SMP <snip> Process truncate (pid: 10995, threadinfo ffff8802353c2000, task ffff880234cfa000) Stack: ffff8802333c77b8 ffffffff810b64b0 0000000000003802 ffffffffa0052cca 0000000000000000 ffff8802353c3b58 0000000000000000 ffff8802353c3b58 0000000000000001 0000000000000000 ffffea0007b92308 ffffea0007b92308 Call Trace: [<ffffffff810b64b0>] ? invalidate_inode_pages2_range+0x15f/0x273 [<ffffffffa0052cca>] ? nilfs_palloc_get_block+0x2d/0xaf [nilfs2] [<ffffffff810589e7>] ? bit_waitqueue+0x14/0xa1 [<ffffffff81058ab1>] ? wake_up_bit+0x10/0x20 [<ffffffffa00433fd>] ? nilfs_forget_buffer+0x66/0x7a [nilfs2] [<ffffffffa00467b8>] ? nilfs_btree_concat_left+0x5c/0x77 [nilfs2] [<ffffffffa00471fc>] ? nilfs_btree_delete+0x395/0x3cf [nilfs2] [<ffffffffa00449a3>] ? nilfs_bmap_do_delete+0x6e/0x79 [nilfs2] [<ffffffffa0045845>] ? nilfs_btree_last_key+0x14b/0x15e [nilfs2] [<ffffffffa00449dd>] ? nilfs_bmap_truncate+0x2f/0x83 [nilfs2] [<ffffffffa0044ab2>] ? nilfs_bmap_last_key+0x35/0x62 [nilfs2] [<ffffffffa003e99b>] ? nilfs_truncate_bmap+0x6b/0xc7 [nilfs2] [<ffffffffa003ee4a>] ? nilfs_truncate+0x79/0xe4 [nilfs2] [<ffffffff810b6c00>] ? vmtruncate+0x33/0x3b [<ffffffffa003e8f1>] ? nilfs_setattr+0x4d/0x8c [nilfs2] [<ffffffff81026106>] ? do_page_fault+0x31b/0x356 [<ffffffff810f9d61>] ? notify_change+0x17d/0x262 [<ffffffff810e5046>] ? do_truncate+0x65/0x80 [<ffffffff810e52af>] ? sys_ftruncate+0xf1/0xf6 [<ffffffff8132c012>] ? system_call_fastpath+0x16/0x1b Code: c3 48 83 ec 08 48 8b 17 48 8b 47 18 80 e2 01 75 04 0f 0b eb fe 48 8b 17 80 e6 20 74 05 31 c0 41 59 c3 48 85 c0 74 11 48 8b 40 58 8b 40 48 48 85 c0 74 04 41 58 ff e0 59 e9 b1 b5 05 00 41 54 RIP [<ffffffff810ac235>] try_to_release_page+0x2a/0x3d RSP <ffff8802353c3b08> CR2: 0000000000000048 This oops was brought in by the change "block: remove per-queue plugging" (commit: 7eaceaccab5f40bb). It initializes mapping->a_ops with a NULL pointer for some pages in nilfs (e.g. btree node pages), but mm code doesn't NULL pointer checks against mapping->a_ops. (the check is done for each callback function) This corrects the aops initialization and fixes the oops. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-30nilfs2: fix data loss in mmap page write for hole blocksRyusuke Konishi1-6/+5
From the result of a function test of mmap, mmap write to shared pages turned out to be broken for hole blocks. It doesn't write out filled blocks and the data will be lost after umount. This is due to a bug that the target file is not queued for log writer when filling hole blocks. Also, nilfs_page_mkwrite function exits normal code path even after successfully filled hole blocks due to a change of block_page_mkwrite function; just after nilfs was merged into the mainline, block_page_mkwrite() started to return VM_FAULT_LOCKED instead of zero by the patch "mm: close page_mkwrite races" (commit: b827e496c893de0c). The current nilfs_page_mkwrite() is not handling this value properly. This corrects nilfs_page_mkwrite() and will resolve the data loss problem in mmap write. [This should be applied to every kernel since 2.6.30 but a fix is needed for 2.6.37 and prior kernels] Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: stable <stable@kernel.org> [2.6.38]
2011-03-24Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds7-21/+7
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
2011-03-23userns: rename is_owner_or_cap to inode_owner_or_capableSerge E. Hallyn1-1/+1
And give it a kernel-doc comment. [akpm@linux-foundation.org: btrfs changed in linux-next] Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23nilfs2: use little-endian bitopsAkinobu Mita1-1/+1
As a preparation for removing ext2 non-atomic bit operations from asm/bitops.h. This converts ext2 non-atomic bit operations to little-endian bit operations. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-10Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe7-21/+7
Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: kill off REQ_UNPLUGJens Axboe1-1/+1
With the plugging now being explicitly controlled by the submitter, callers need not pass down unplugging hints to the block layer. If they want to unplug, it's because they manually plugged on their own - in which case, they should just unplug at will. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe6-19/+6
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-09nilfs2: get rid of nilfs_sb_info structureRyusuke Konishi12-134/+68
This directly uses sb->s_fs_info to keep a nilfs filesystem object and fully removes the intermediate nilfs_sb_info structure. With this change, the hierarchy of on-memory structures of nilfs will be simplified as follows: Before: super_block -> nilfs_sb_info -> the_nilfs -> cptree --+-> nilfs_root (current file system) +-> nilfs_root (snapshot A) +-> nilfs_root (snapshot B) : -> nilfs_sc_info (log writer structure) After: super_block -> the_nilfs -> cptree --+-> nilfs_root (current file system) +-> nilfs_root (snapshot A) +-> nilfs_root (snapshot B) : -> nilfs_sc_info (log writer structure) The reason why we didn't design so from the beginning is because the initial shape also differed from the above. The early hierachy was composed of "per-mount-point" super_block -> nilfs_sb_info pairs and a shared nilfs object. On the kernel 2.6.37, it was changed to the current shape in order to unify super block instances into one per device, and this cleanup became applicable as the result. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: use sb instance instead of nilfs_sb_info structRyusuke Konishi7-145/+129
This replaces sbi uses with direct reference to sb instance. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: get rid of sc_sbi back pointerRyusuke Konishi2-19/+12
Removes sci->sc_sbi which is a back pointer to nilfs_sb_info struct from log writer object (nilfs_sc_info). Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move log writer onto nilfs objectRyusuke Konishi3-39/+34
Log writer is held by the nilfs_sb_info structure. This moves it into nilfs object and replaces all uses of NILFS_SC() accessor. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move next generation counter into nilfs objectRyusuke Konishi5-19/+15
Moves s_next_generation counter and a spinlock protecting it to nilfs object from nilfs_sb_info structure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move s_inode_lock and s_dirty_files into nilfs objectRyusuke Konishi6-61/+63
Moves s_inode_lock spinlock and s_dirty_files list to nilfs object from nilfs_sb_info structure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move parameters on nilfs_sb_info into nilfs objectRyusuke Konishi4-16/+19
This moves four parameter variables on nilfs_sb_info s_resuid, s_resgid, s_interval and s_watermark to the nilfs object. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move mount options to nilfs objectRyusuke Konishi5-49/+54
This moves mount_opt local variable to nilfs object from nilfs_sb_info struct. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: record used amount of each checkpoint in checkpoint listRyusuke Konishi6-19/+25
This records the number of used blocks per checkpoint in each checkpoint entry of cpfile. Even though userland tools can get the block count via nilfs_get_cpinfo ioctl, it was not updated by the nilfs2 kernel code. This fixes the issue and makes it available for userland tools to calculate used amount per checkpoint. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Jiro SEKIBA <jir@unicus.jp>
2011-03-08nilfs2: optimize rec_len functionsRyusuke Konishi1-0/+1
This is a similar change to those in ext2/ext3 codebase (commit 40a063f6691ce937 and a4ae3094869f18e2, respectively). The addition of 64k block capability in the rec_len_from_disk and rec_len_to_disk functions added a bit of math overhead which slows down file create workloads needlessly when the architecture cannot even support 64k blocks. This will cut the corner. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: append blocksize info to warnings during loading super blocksRyusuke Konishi1-4/+7
At present, the same warning message can be output twice when nilfs detected a problem on super blocks: NILFS warning: broken superblock. using spare superblock. NILFS warning: broken superblock. using spare superblock. ... This is because these super blocks are reloaded with the block size written in a super block if it differs from the first block size, but this repetition looks somewhat confusing. So, we hint at what is going on by appending block size information to those messages. Reported-by: Wakko Warner <wakko@animx.eu.org> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: add compat ioctlRyusuke Konishi4-2/+24
The current FS_IOC_GETFLAGS/SETFLAGS/GETVERSION will fail if application is 32 bit and kernel is 64 bit. This issue is avoidable by adding compat_ioctl method. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: implement FS_IOC_GETFLAGS/SETFLAGS/GETVERSIONRyusuke Konishi1-0/+70
Add support for the standard attributes set via chattr and read via lsattr. These attributes are already in the flags value in the nilfs2 inode, but currently we don't have any ioctl commands that expose them to the userland. Collaterally, this adds the FS_IOC_GETVERSION ioctl for getting i_generation, which allows users to list the file's generation number with "lsattr -v". Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: tighten restrictions on inode flagsRyusuke Konishi2-5/+19
Nilfs has few rectrictions on which flags may be set on which inodes like ext2/3/4 filesystems used to be. Specifically DIRSYNC may only be set on directories and IMMUTABLE and APPEND may not be set on links. Tighten that to disallow TOPDIR being set on non-directories and only NODUMP and NOATIME to be set on non-regular file, non-directories. This introduces a flags masking function like those of extN and uses it during inode creation. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: mark S_NOATIME on inodes only if NOATIME attribute is setRyusuke Konishi1-2/+0
At present, nilfs marks S_NOATIME flag on all inodes. This restricts nilfs_set_inode_flags function so that it marks S_NOATIME only if a given inode has an FS_NOATIME_FL flag. Although nilfs does not support atime yet, touch_atime() still safely returns on IS_NOATIME check since MS_NOATIME is always set on sb. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 11:29:04 +0000