summaryrefslogtreecommitdiffstats
path: root/fs/nfs/pnfs.h
AgeCommit message (Collapse)AuthorFilesLines
2021-01-10pNFS: We want return-on-close to complete when evicting the inodeTrond Myklebust1-5/+3
If the inode is being evicted, it should be safe to run return-on-close, so we should do it to ensure we don't inadvertently leak layout segments. Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFSv4: Fix a pNFS layout related use-after-free race when freeing the inodeTrond Myklebust1-0/+5
When returning the layout in nfs4_evict_inode(), we need to ensure that the layout is actually done being freed before we can proceed to free the inode itself. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02NFSv4/pNFS: Store the transport type in struct nfs4_pnfs_ds_addrTrond Myklebust1-0/+2
We want to enable RDMA and UDP as valid transport methods if a GETDEVICEINFO call specifies it. Do so by adding a parser for the netid that translates it to an appropriate argument for the RPC transport layer. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-08-12NFS: Fix flexfiles read failoverTrond Myklebust1-1/+1
The current mirrored read failover code is correctly resetting the mirror index between failed reads, however it is not able to actually flip the RPC call over to the next RPC client. The end result is that we keep resending the RPC call to the same client over and over. The fix is to use the pnfs_read_resend_pnfs() mechanism to schedule a new RPC call, but we need to add the ability to pass in a mirror index so that we always retry the next mirror in the list. Fixes: 166bd5b889ac ("pNFS/flexfiles: Fix layoutstats handling during read failovers") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27pNFS/flexfiles: Check the layout segment range before doing I/OTrond Myklebust1-0/+1
When starting to read or write with a layout segment, check that the range matches our request. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27NFS/pNFS: Clean up pNFS commit operationsTrond Myklebust1-40/+70
Move the pNFS commit related operations into a separate structure that can be carried by the pnfs_ds_commit_info. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27NFS/pNFS: Add a helper pnfs_generic_search_commit_reqs()Trond Myklebust1-0/+2
Lift filelayout_search_commit_reqs() into the generic pnfs/nfs code, and add support for commit arrays. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27pNFS: Enable per-layout segment commit structuresTrond Myklebust1-0/+6
Enable adding and lookup of per-layout segment commits in filelayout and flexfilelayout. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27pNFS: Add infrastructure for cleaning up per-layout commit structuresTrond Myklebust1-0/+4
Ensure that both the file and flexfiles layout types clean up when freeing the layout segments. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27NFS/pNFS: Allow O_DIRECT to release the DS commitinfoTrond Myklebust1-0/+16
Add a pNFS callback to allow the O_DIRECT code to release the DS commitinfo when freeing the dreq. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-27NFSv4/pnfs: Support a list of commit arrays in struct pnfs_ds_commit_infoTrond Myklebust1-0/+11
When we have multiple layout segments with different lists of mirrored data, we need to track the commits on a per layout segment basis. This patch adds a list to support this tracking in struct pnfs_ds_commit_info. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-26pNFS: Add a helper to allocate the array of bucketsTrond Myklebust1-0/+3
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-16NFSv4: Add support for CB_RECALL_ANY for flexfiles layoutsTrond Myklebust1-0/+3
When we receive a CB_RECALL_ANY that asks us to return flexfiles layouts, we iterate through all the layouts and look at whether or not there are active open file descriptors that might need them for I/O. If there are no such descriptors, we return the layouts. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-16NFSv4: Ensure layout headers are RCU safeTrond Myklebust1-0/+2
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-16NFSv4/pnfs: pnfs_set_layout_stateid() should update the layout credTrond Myklebust1-0/+1
If the cred assigned to the layout that we're updating differs from the one used to retrieve the new layout segment, then we need to update the layout plh_lc_cred field. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-01-15pNFS/flexfiles: Record resend attempts on I/O failureTrond Myklebust1-4/+4
If the attempt to do pNFS fails, then record what action we take to recover (resend, reset to pnfs or reset to mds). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-09-20pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqidTrond Myklebust1-2/+2
If a LAYOUTRETURN receives a reply of NFS4ERR_OLD_STATEID then assume we've missed an update, and just bump the stateid. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-09-20NFSv4: Clean up pNFS return-on-close error handlingTrond Myklebust1-0/+13
Both close and delegreturn have identical code to handle pNFS return-on-close. This patch refactors that code and places it in pnfs.c Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-25NFS: Add a helper to return a pointer to the open context of a struct nfs_pageTrond Myklebust1-2/+2
Add a helper for when we remove the explicit pointer to the open context. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-03-01NFS/flexfiles: Speed up read failover when DSes are downTrond Myklebust1-0/+1
If we notice that a DS may be down, we should attempt to read from the other mirrors first before we go back to retry the dead DS. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-23NFS/pnfs: Bulk destroy of layouts needs to be safe w.r.t. umountTrond Myklebust1-0/+1
If a bulk layout recall or a metadata server reboot coincides with a umount, then holding a reference to an inode is unsafe unless we also hold a reference to the super block. Fixes: fd9a8d7160937 ("NFSv4.1: Fix bulk recall and destroy of layouts") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-12-19NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.NeilBrown1-5/+5
SUNRPC has two sorts of credentials, both of which appear as "struct rpc_cred". There are "generic credentials" which are supplied by clients such as NFS and passed in 'struct rpc_message' to indicate which user should be used to authorize the request, and there are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS which describe the credential to be sent over the wires. This patch replaces all the generic credentials by 'struct cred' pointers - the credential structure used throughout Linux. For machine credentials, there is a special 'struct cred *' pointer which is statically allocated and recognized where needed as having a special meaning. A look-up of a low-level cred will map this to a machine credential. Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-09-30pNFS: Don't allocate more pages than we need to fit a layoutget responseTrond Myklebust1-0/+1
For the 'files' and 'flexfiles' layout types, we do not expect the reply to be any larger than 4k. The block and scsi layout types are a little more greedy, so we keep allocating the maximum response size for now. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-08-16pNFS: When updating the stateid in layoutreturn, also update the recall rangeTrond Myklebust1-1/+4
When we update the layout stateid in nfs4_layoutreturn_refresh_stateid, we should also update the range in order to let the server know we're actually returning everything. Fixes: 16c278dbfa63 ("pnfs: Fix handling of NFS4ERR_OLD_STATEID replies...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-08-08pnfs: Fix handling of NFS4ERR_OLD_STATEID replies to layoutreturnTrond Myklebust1-2/+2
If the server tells us that out layoutreturn raced with another layout update, then we must ensure that the new layout segments are not in use before we resend with an updated layout stateid. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-06-19pNFS: Don't send layoutreturn if the layout is already invalidTrond Myklebust1-0/+5
If the layout was invalidated due to a reboot, then don't try to send a layoutreturn for it. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Fix manipulation of NFS_LAYOUT_FIRST_LAYOUTGETFred Isaman1-0/+6
The flag was not always being cleared after LAYOUTGET on OPEN. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pNFS: Refactor nfs4_layoutget_release()Trond Myklebust1-1/+1
Move the actual freeing of the struct nfs4_layoutget into fs/nfs/pnfs.c where it can be reused by the layoutget on open code. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add LAYOUTGET to OPEN of a new fileFred Isaman1-0/+17
This triggers when have no pre-existing inode to attach to. The preexisting case is saved for later. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: move allocations out of nfs4_proc_layoutgetFred Isaman1-1/+3
They work better in the new alloc_init function. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add layout driver flag PNFS_LAYOUTGET_ON_OPENFred Isaman1-0/+1
Driver can set flag to allow LAYOUTGET to be sent with OPEN. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-01-14pnfs/blocklayout: handle transient devicesBenjamin Coddington1-0/+2
PNFS block/SCSI layouts should gracefully handle cases where block devices are not available when a layout is retrieved, or the block devices are removed while the client holds a layout. While setting up a layout segment, keep a record of an unavailable or un-parsable block device in cache with a flag so that subsequent layouts do not spam the server with GETDEVINFO. We can reuse the current NFS_DEVICEID_UNAVAILABLE handling with one variation: instead of reusing the device, we will discard it and send a fresh GETDEVINFO after the timeout, since the lookup and validation of the device occurs within the GETDEVINFO response handling. A lookup of a layout segment that references an unavailable device will return a segment with the NFS_LSEG_UNAVAILABLE flag set. This will allow the pgio layer to mark the layout with the appropriate fail bit, which forces subsequent IO to the MDS, and prevents spamming the server with LAYOUTGET, LAYOUTRETURN. Finally, when IO to a block device fails, look up the block device(s) referenced by the pgio header, and mark them as unavailable. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14pnfs/blocklayout: set PNFS_LAYOUTRETURN_ON_ERRORBenjamin Coddington1-1/+3
If there's an error doing I/O to block device, and the client resends the I/O to the MDS, the MDS must recall the layout from the client before processing the I/O. Let's preempt that exchange by returning the layout before falling back to the MDS when there's an error. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-11-17pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-closeTrond Myklebust1-0/+6
If our layoutreturn on close operation returns an NFS4ERR_OLD_STATEID, then try to update the stateid and retry. We know that there should be no further LAYOUTGET requests being launched. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17fs, nfs: convert pnfs_layout_hdr.plh_refcount from atomic_t to refcount_tElena Reshetova1-1/+1
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable pnfs_layout_hdr.plh_refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17fs, nfs: convert pnfs_layout_segment.pls_refcount from atomic_t to refcount_tElena Reshetova1-2/+2
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17fs, nfs: convert nfs4_pnfs_ds.ds_count from atomic_t to refcount_tElena Reshetova1-1/+2
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs4_pnfs_ds.ds_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-08-15NFSv4/pnfs: Replace pnfs_put_lseg_locked() with pnfs_put_lseg()Trond Myklebust1-2/+0
Now that we no longer hold the inode->i_lock when manipulating the commit lists, it is safe to call pnfs_put_lseg() again. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-24pnfs: Fix the check for requests in range of layout segmentBenjamin Coddington1-0/+10
It's possible and acceptable for NFS to attempt to add requests beyond the range of the current pgio->pg_lseg, a case which should be caught and limited by the pg_test operation. However, the current handling of this case replaces pgio->pg_lseg with a new layout segment (after a WARN) within that pg_test operation. That will cause all the previously added requests to be submitted with this new layout segment, which may not be valid for those requests. Fix this problem by only returning zero for the number of bytes to coalesce from pg_test for this case which allows any previously added requests to complete on the current layout segment. The check for requests starting out of range of the layout segment moves to pg_init, so that the replacement of pgio->pg_lseg will be done when the next request is added. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-04-25pNFS: Ensure we check layout segment validity in the pg_init() callbackTrond Myklebust1-0/+1
If we have a layout segment cached in pgio->pg_lseg, we should check it for validity before reusing it in a new RPC request. Otherwise, if we recoalesce, we can end up looping forever. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-04-20pNFS: Remove unused layout driver callbacksTrond Myklebust1-5/+0
encode_layoutreturn and encode_layoutcommit are now unused. Let's remove them. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-03-17pNFS: return status from nfs4_pnfs_ds_connectWeston Andros Adamson1-1/+1
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it can wait on another context to reach the same failure. This checks that the rpc_create succeeded and returns the error to the caller. When an error is returned, both the files and flexfiles layouts will return NULL from _prepare_ds(). The flexfiles layout will also return the layout with the error NFS4ERR_NXIO. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-12-03pNFS/flexfiles: Minor refactoring before adding iostats to layoutreturnTrond Myklebust1-1/+0
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS: Add a layoutreturn callback to performa layout-private setupTrond Myklebust1-0/+1
Add a callback to allow the flexfiles layout driver to initialise the layout private payload. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01NFS: Remove unused authflavour parameter from nfs_get_client()Anna Schumaker1-2/+1
This parameter hasn't been used since f8407299 (Linux 3.11-rc2), so let's remove it from this function and callers. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01pNFS: Enable layoutreturn operation for return-on-closeTrond Myklebust1-16/+14
Amend the pnfs return on close helper functions to enable sending the layoutreturn op in CLOSE/DELEGRETURN. This closes a potential race between CLOSE/DELEGRETURN and parallel OPEN calls to the same file, and allows the client and the server to agree on whether or not there is an outstanding layout. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01pNFS: Get rid of unnecessary layout parameter in encode_layoutreturn callbackTrond Myklebust1-2/+1
The parameter is already present in the "args" structure. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01NFSv4: Ignore LAYOUTRETURN result if the layout doesn't match or is invalidTrond Myklebust1-1/+1
Fix a potential race with CB_LAYOUTRECALL in which the server recalls the remaining layout segments while our LAYOUTRETURN is still in transit. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01pNFS: Do not free layout segments that are marked for returnTrond Myklebust1-1/+5
We may want to process and transmit layout stat information for the layout segments that are being returned, so we should defer freeing them until after the layoutreturn has completed. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-01pNFS: consolidate the different range intersection testsTrond Myklebust1-0/+32
Both pnfs.c and the flexfiles code have their own versions of the range intersection testing, and the "end_offset" helper. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 18:24:29 +0000