summaryrefslogtreecommitdiffstats
path: root/fs/btrfs/reada.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26btrfs: rename btrfs_bio to btrfs_io_contextQu Wenruo1-13/+13
The structure btrfs_bio is used by two different sites: - bio->bi_private for mirror based profiles For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records how many mirrors are still pending, and save the original endio function of the bio. - RAID56 code In that case, RAID56 only utilize the stripes info, and no long uses that to trace the pending mirrors. So btrfs_bio is not always bind to a bio, and contains more info for IO context, thus renaming it will make the naming less confusing. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-16btrfs: subpage: make readahead work properlyQu Wenruo1-17/+18
In readahead infrastructure, we are using a lot of hard coded PAGE_SHIFT while we're not doing anything specific to PAGE_SIZE. One of the most affected part is the radix tree operation of btrfs_fs_info::reada_tree. If using PAGE_SHIFT, subpage metadata readahead is broken and does no help reading metadata ahead. Fix the problem by using btrfs_fs_info::sectorsize_bits so that readahead could work for subpage. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: pass the owner_root and level to alloc_extent_bufferJosef Bacik1-3/+5
Now that we've plumbed all of the callers to have the owner root and the level, plumb it down into alloc_extent_buffer(). Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: pass the root owner and level around for readaheadJosef Bacik1-6/+18
The readahead infrastructure does raw reads of extent buffers, but we're going to need to know their owner and level in order to set the lockdep key properly, so plumb in the infrastructure that we'll need to have this information when we start allocating extent buffers. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08btrfs: assert we are holding the reada_lock when releasing a readahead zoneFilipe Manana1-0/+2
When we drop the last reference of a zone, we end up releasing it through the callback reada_zone_release(), which deletes the zone from a device's reada_zones radix tree. This tree is protected by the global readahead lock at fs_info->reada_lock. Currently all places that are sure that they are dropping the last reference on a zone, are calling kref_put() in a critical section delimited by this lock, while all other places that are sure they are not dropping the last reference, do not bother calling kref_put() while holding that lock. When working on the previous fix for hangs and use-after-frees in the readahead code, my initial attempts were different and I actually ended up having reada_zone_release() called when not holding the lock, which resulted in weird and unexpected problems. So just add an assertion there to detect such problem more quickly and make the dependency more obvious. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-26btrfs: fix readahead hang and use-after-free after removing a deviceFilipe Manana1-0/+45
Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 #10 do_syscall_64+0x33/0x77 #11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-26btrfs: fix use-after-free on readahead extent after failure to create itFilipe Manana1-0/+2
If we fail to find suitable zones for a new readahead extent, we end up leaving a stale pointer in the global readahead extents radix tree (fs_info->reada_tree), which can trigger the following trace later on: [13367.696354] BUG: kernel NULL pointer dereference, address: 00000000000000b0 [13367.696802] #PF: supervisor read access in kernel mode [13367.697249] #PF: error_code(0x0000) - not-present page [13367.697721] PGD 0 P4D 0 [13367.698171] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [13367.698632] CPU: 6 PID: 851214 Comm: btrfs Tainted: G W 5.9.0-rc6-btrfs-next-69 #1 [13367.699100] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [13367.700069] RIP: 0010:__lock_acquire+0x20a/0x3970 [13367.700562] Code: ff 1f 0f b7 c0 48 0f (...) [13367.701609] RSP: 0018:ffffb14448f57790 EFLAGS: 00010046 [13367.702140] RAX: 0000000000000000 RBX: 29b935140c15e8cf RCX: 0000000000000000 [13367.702698] RDX: 0000000000000002 RSI: ffffffffb3d66bd0 RDI: 0000000000000046 [13367.703240] RBP: ffff8a52ba8ac040 R08: 00000c2866ad9288 R09: 0000000000000001 [13367.703783] R10: 0000000000000001 R11: 00000000b66d9b53 R12: ffff8a52ba8ac9b0 [13367.704330] R13: 0000000000000000 R14: ffff8a532b6333e8 R15: 0000000000000000 [13367.704880] FS: 00007fe1df6b5700(0000) GS:ffff8a5376600000(0000) knlGS:0000000000000000 [13367.705438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13367.705995] CR2: 00000000000000b0 CR3: 000000022cca8004 CR4: 00000000003706e0 [13367.706565] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [13367.707127] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [13367.707686] Call Trace: [13367.708246] ? ___slab_alloc+0x395/0x740 [13367.708820] ? reada_add_block+0xae/0xee0 [btrfs] [13367.709383] lock_acquire+0xb1/0x480 [13367.709955] ? reada_add_block+0xe0/0xee0 [btrfs] [13367.710537] ? reada_add_block+0xae/0xee0 [btrfs] [13367.711097] ? rcu_read_lock_sched_held+0x5d/0x90 [13367.711659] ? kmem_cache_alloc_trace+0x8d2/0x990 [13367.712221] ? lock_acquired+0x33b/0x470 [13367.712784] _raw_spin_lock+0x34/0x80 [13367.713356] ? reada_add_block+0xe0/0xee0 [btrfs] [13367.713966] reada_add_block+0xe0/0xee0 [btrfs] [13367.714529] ? btrfs_root_node+0x15/0x1f0 [btrfs] [13367.715077] btrfs_reada_add+0x117/0x170 [btrfs] [13367.715620] scrub_stripe+0x21e/0x10d0 [btrfs] [13367.716141] ? kvm_sched_clock_read+0x5/0x10 [13367.716657] ? __lock_acquire+0x41e/0x3970 [13367.717184] ? scrub_chunk+0x60/0x140 [btrfs] [13367.717697] ? find_held_lock+0x32/0x90 [13367.718254] ? scrub_chunk+0x60/0x140 [btrfs] [13367.718773] ? lock_acquired+0x33b/0x470 [13367.719278] ? scrub_chunk+0xcd/0x140 [btrfs] [13367.719786] scrub_chunk+0xcd/0x140 [btrfs] [13367.720291] scrub_enumerate_chunks+0x270/0x5c0 [btrfs] [13367.720787] ? finish_wait+0x90/0x90 [13367.721281] btrfs_scrub_dev+0x1ee/0x620 [btrfs] [13367.721762] ? rcu_read_lock_any_held+0x8e/0xb0 [13367.722235] ? preempt_count_add+0x49/0xa0 [13367.722710] ? __sb_start_write+0x19b/0x290 [13367.723192] btrfs_ioctl+0x7f5/0x36f0 [btrfs] [13367.723660] ? __fget_files+0x101/0x1d0 [13367.724118] ? find_held_lock+0x32/0x90 [13367.724559] ? __fget_files+0x101/0x1d0 [13367.724982] ? __x64_sys_ioctl+0x83/0xb0 [13367.725399] __x64_sys_ioctl+0x83/0xb0 [13367.725802] do_syscall_64+0x33/0x80 [13367.726188] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [13367.726574] RIP: 0033:0x7fe1df7add87 [13367.726948] Code: 00 00 00 48 8b 05 09 91 (...) [13367.727763] RSP: 002b:00007fe1df6b4d48 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [13367.728179] RAX: ffffffffffffffda RBX: 000055ce1fb596a0 RCX: 00007fe1df7add87 [13367.728604] RDX: 000055ce1fb596a0 RSI: 00000000c400941b RDI: 0000000000000003 [13367.729021] RBP: 0000000000000000 R08: 00007fe1df6b5700 R09: 0000000000000000 [13367.729431] R10: 00007fe1df6b5700 R11: 0000000000000246 R12: 00007ffd922b07de [13367.729842] R13: 00007ffd922b07df R14: 00007fe1df6b4e40 R15: 0000000000802000 [13367.730275] Modules linked in: btrfs blake2b_generic xor (...) [13367.732638] CR2: 00000000000000b0 [13367.733166] ---[ end trace d298b6805556acd9 ]--- What happens is the following: 1) At reada_find_extent() we don't find any existing readahead extent for the metadata extent starting at logical address X; 2) So we proceed to create a new one. We then call btrfs_map_block() to get information about which stripes contain extent X; 3) After that we iterate over the stripes and create only one zone for the readahead extent - only one because reada_find_zone() returned NULL for all iterations except for one, either because a memory allocation failed or it couldn't find the block group of the extent (it may have just been deleted); 4) We then add the new readahead extent to the readahead extents radix tree at fs_info->reada_tree; 5) Then we iterate over each zone of the new readahead extent, and find that the device used for that zone no longer exists, because it was removed or it was the source device of a device replace operation. Since this left 'have_zone' set to 0, after finishing the loop we jump to the 'error' label, call kfree() on the new readahead extent and return without removing it from the radix tree at fs_info->reada_tree; 6) Any future call to reada_find_extent() for the logical address X will find the stale pointer in the readahead extents radix tree, increment its reference counter, which can trigger the use-after-free right away or return it to the caller reada_add_block() that results in the use-after-free of the example trace above. So fix this by making sure we delete the readahead extent from the radix tree if we fail to setup zones for it (when 'have_zone = 0'). Fixes: 319450211842ba ("btrfs: reada: bypass adding extent when all zone failed") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: reada: lock all seed/sprout devices in __reada_start_machineAnand Jain1-2/+3
On an fs mounted using a sprout device, the seed fs_devices are maintained in a linked list under fs_info->fs_devices. Each seeds fs_devices also has device_list_mutex initialized to protect against the potential race with delete threads. But the delete thread (at btrfs_rm_device()) is holding the fs_info::fs_devices::device_list_mutex mutex which belongs to sprout device_list_mutex instead of seed device_list_mutex. Moreover, there aren't any significient benefits in using the seed::device_list_mutex instead of sprout::device_list_mutex. So this patch converts them of using the seed::device_list_mutex to sprout::device_list_mutex. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: switch seed device to list apiNikolay Borisov1-6/+3
While this patch touches a bunch of files the conversion is straighforward. Instead of using the implicit linked list anchored at btrfs_fs_devices::seed the code is switched to using list_for_each_entry. Previous patches in the series already factored out code that processed both main and seed devices so in those cases the factored out functions are called on the main fs_devices and then on every seed dev inside list_for_each_entry. Using list api also allows to simplify deletion from the seed dev list performed in btrfs_rm_device and btrfs_rm_dev_replace_free_srcdev by substituting a while() loop with a simple list_del_init. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07btrfs: factor out reada loop in __reada_start_machineNikolay Borisov1-5/+15
This is in preparation for moving fs_devices to proper lists. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: rename btrfs_block_group_cacheDavid Sterba1-1/+1
The type name is misleading, a single entry is named 'cache' while this normally means a collection of objects. Rename that everywhere. Also the identifier was quite long, making function prototypes harder to format. Suggested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: add dedicated members for start and length of a block groupDavid Sterba1-2/+2
The on-disk format of block group item makes use of the key that stores the offset and length. This is further used in the code, although this makes thing harder to understand. The key is also packed so the offset/length is not properly aligned as u64. Add start (key.objectid) and length (key.offset) members to block group and remove the embedded key. When the item is searched or written, a local variable for key is used. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: get rid of unique workqueue helper functionsOmar Sandoval1-2/+1
Commit 9e0af2376434 ("Btrfs: fix task hang under heavy compressed write") worked around the issue that a recycled work item could get a false dependency on the original work item due to how the workqueue code guarantees non-reentrancy. It did so by giving different work functions to different types of work. However, the fixes in the previous few patches are more complete, as they prevent a work item from being recycled at all (except for a tiny window that the kernel workqueue code handles for us). This obsoletes the previous fix, so we don't need the unique helpers for correctness. The only other reason to keep them would be so they show up in stack traces, but they always seem to be optimized to a tail call, so they don't show up anyways. So, let's just get rid of the extra indirection. While we're here, rename normal_work_helper() to the more informative btrfs_work_helper(). Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18btrfs: don't prematurely free work in reada_start_machine_worker()Omar Sandoval1-6/+4
Currently, reada_start_machine_worker() frees the reada_machine_work and then calls __reada_start_machine() to do readahead. This is another potential instance of the bug in "btrfs: don't prematurely free work in run_ordered_work()". There _might_ already be a deadlock here: reada_start_machine_worker() can depend on itself through stacked filesystems (__read_start_machine() -> reada_start_machine_dev() -> reada_tree_block_flagged() -> read_extent_buffer_pages() -> submit_one_bio() -> btree_submit_bio_hook() -> btrfs_map_bio() -> submit_stripe_bio() -> submit_bio() onto a loop device can trigger readahead on the lower filesystem). Either way, let's fix it by freeing the work at the end. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: Make reada_tree_block_flagged privateNikolay Borisov1-0/+29
This function is used only for the readahead machinery. It makes no sense to keep it external to reada.c file. Place it above its sole caller and make it static. No functional changes. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09btrfs: move basic block_group definitions to their own headerJosef Bacik1-0/+1
This is prep work for moving all of the block group cache code into its own file. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ minor comment updates ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-06-14btrfs: start readahead also in seed devicesNaohiro Aota1-0/+5
Currently, btrfs does not consult seed devices to start readahead. As a result, if readahead zone is added to the seed devices, btrfs_reada_wait() indefinitely wait for the reada_ctl to finish. You can reproduce the hung by modifying btrfs/163 to have larger initial file size (e.g. xfs_io pwrite 4M instead of current 256K). Fixes: 7414a03fbf9e ("btrfs: initial readahead code and prototypes") Cc: stable@vger.kernel.org # 3.2+: ce7791ffee1e: Btrfs: fix race between readahead and device replace/removal Cc: stable@vger.kernel.org # 3.2+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: dev-replace: open code trivial locking helpersDavid Sterba1-6/+6
The dev-replace locking functions are now trivial wrappers around rw semaphore that can be used directly everywhere. No functional change. Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-17btrfs: reada: reorder dev-replace locks before radix tree preloadDavid Sterba1-5/+7
The device-replace read lock is going to use rw semaphore in followup commits. The semaphore might sleep which is not possible in the radix tree preload section. The lock nesting is now: * device replace * radix tree preload * readahead spinlock Signed-off-by: David Sterba <dsterba@suse.com>
2018-08-06btrfs: prune unused includesDavid Sterba1-1/+0
Remove includes if none of the interfaces and exports is used in the given source file. Signed-off-by: David Sterba <dsterba@suse.com>
2018-08-06btrfs: Fix misleading indentation reported by smatchBart Van Assche1-1/+1
This patch avoids that building the BTRFS source code with smatch triggers complaints about inconsistent indenting. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-12btrfs: replace GPL boilerplate by SPDX -- sourcesDavid Sterba1-14/+1
Remove GPL boilerplate text (long, short, one-line) and keep the rest, ie. personal, company or original source copyright statements. Add the SPDX header. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: split dev-replace locking helpers for read and writeDavid Sterba1-5/+5
The current calls are unclear in what way btrfs_dev_replace_lock takes the locks, so drop the argument, split the helpers and use similar naming as for read and write locks. Signed-off-by: David Sterba <dsterba@suse.com>
2017-06-19btrfs: remove unused member err from reada_extentDavid Sterba1-1/+0
Seems to be unused since the initial commit, we ignore readahead errors anyway, the full read will handle that if necessary. Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove local blocksize variable in reada_find_extentDavid Sterba1-4/+2
The name is misleading and the local variable serves no purpose. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from reada_start_machine_devDavid Sterba1-4/+3
We can read fs_info from dev. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from reada_find_zoneDavid Sterba1-3/+3
We can read fs_info from dev. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from btree_readahead_hookDavid Sterba1-2/+2
We can read fs_info from eb. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: preallocate radix tree node for global readahead treeDavid Sterba1-0/+7
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: preallocate radix tree node for readaheadDavid Sterba1-0/+7
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: take an fs_info directly when the root is not used otherwiseJeff Mahoney1-5/+3
There are loads of functions in btrfs that accept a root parameter but only use it to obtain an fs_info pointer. Let's convert those to just accept an fs_info pointer directly. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: root->fs_info cleanup, add fs_info convenience variablesJeff Mahoney1-5/+4
In routines where someptr->fs_info is referenced multiple times, we introduce a convenience variable. This makes the code considerably more readable. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: pull node/sector/stripe sizes out of root and into fs_infoJeff Mahoney1-4/+4
We track the node sizes per-root, but they never vary from the values in the superblock. This patch messes with the 80-column style a bit, but subsequent patches to factor out root->fs_info into a convenience variable fix it up again. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-12-06btrfs: struct reada_control.root -> reada_control.fs_infoJeff Mahoney1-6/+7
The root is never used. We substitute extent_root in for the reada_find_extent call, since it's only ever used to obtain the node size. This call site will be changed to use fs_info in a later patch. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-30btrfs: reada, remove pointless BUG_ON check for fs_infoDavid Sterba1-1/+0
We dereference fs_info several times, besides that post-mount functions should never see a NULL fs_info. Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-30btrfs: reada, remove pointless BUG_ON in reada_find_extentDavid Sterba1-1/+0
The lock is held, we make the same lookup that previously failed with EEXIST and we don't insert NULL pointers. Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-30btrfs: reada, sink start parameter to btree_readahead_hookDavid Sterba1-6/+2
Originally, the eb and start were passed separately in case eb is NULL. Since the readahead has been refactored in 4.6, this is not true anymore and we can get rid of the parameter. Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-30btrfs: reada, remove unused parameter from __readahead_hookDavid Sterba1-4/+4
'start' is not used since "btrfs: reada: Pass reada_extent into __readahead_hook directly" (6e39dbe8b9e55280c). Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-30btrfs: reada, cleanup remove unneeded variable in __readahead_hookDavid Sterba1-5/+1
We can't touch the eb directly in case the function is called with a non-zero error, so we can read the eb level when needed. Signed-off-by: David Sterba <dsterba@suse.com>
2016-11-29btrfs: don't abuse REQ_OP_* flags for btrfs_map_blockChristoph Hellwig1-2/+2
btrfs_map_block supports different types of mappings, which to a large extent resemble block layer operations. But they don't always do, and currently btrfs dangerously overlays it's own flag over the block layer flags. This is just asking for a conflict, so introduce a different map flags enum inside of btrfs instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: convert pr_* to btrfs_* where possibleJeff Mahoney1-3/+3
For many printks, we want to know which file system issued the message. This patch converts most pr_* calls to use the btrfs_* versions instead. In some cases, this means adding plumbing to allow call sites access to an fs_info pointer. fs/btrfs/check-integrity.c is left alone for another day. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: convert printk(KERN_* to use pr_* callsJeff Mahoney1-15/+13
This patch converts printk(KERN_* style messages to use the pr_* versions. One side effect is that anything that was KERN_DEBUG is now automatically a dynamic debug message. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: unsplit printed stringsJeff Mahoney1-3/+3
CodingStyle chapter 2: "[...] never break user-visible strings such as printk messages, because that breaks the ability to grep for them." This patch unsplits user-visible strings. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-30Btrfs: fix race between readahead and device replace/removalFilipe Manana1-0/+2
The list of devices is protected by the device_list_mutex and the device replace code, in its finishing phase correctly takes that mutex before removing the source device from that list. However the readahead code was iterating that list without acquiring the respective mutex leading to crashes later on due to invalid memory accesses: [125671.831036] general protection fault: 0000 [#1] PREEMPT SMP [125671.832129] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis tpm ppdev evdev parport_pc psmouse sg parport processor ser [125671.834973] CPU: 10 PID: 19603 Comm: kworker/u32:19 Tainted: G W 4.6.0-rc7-btrfs-next-29+ #1 [125671.834973] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [125671.834973] Workqueue: btrfs-readahead btrfs_readahead_helper [btrfs] [125671.834973] task: ffff8801ac520540 ti: ffff8801ac918000 task.ti: ffff8801ac918000 [125671.834973] RIP: 0010:[<ffffffff81270479>] [<ffffffff81270479>] __radix_tree_lookup+0x6a/0x105 [125671.834973] RSP: 0018:ffff8801ac91bc28 EFLAGS: 00010206 [125671.834973] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b6a RCX: 0000000000000000 [125671.834973] RDX: 0000000000000000 RSI: 00000000000c1bff RDI: ffff88002ebd62a8 [125671.834973] RBP: ffff8801ac91bc70 R08: 0000000000000001 R09: 0000000000000000 [125671.834973] R10: ffff8801ac91bc70 R11: 0000000000000000 R12: ffff88002ebd62a8 [125671.834973] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000c1bff [125671.834973] FS: 0000000000000000(0000) GS:ffff88023fd40000(0000) knlGS:0000000000000000 [125671.834973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [125671.834973] CR2: 000000000073cae4 CR3: 00000000b7723000 CR4: 00000000000006e0 [125671.834973] Stack: [125671.834973] 0000000000000000 ffff8801422d5600 ffff8802286bbc00 0000000000000000 [125671.834973] 0000000000000001 ffff8802286bbc00 00000000000c1bff 0000000000000000 [125671.834973] ffff88002e639eb8 ffff8801ac91bc80 ffffffff81270541 ffff8801ac91bcb0 [125671.834973] Call Trace: [125671.834973] [<ffffffff81270541>] radix_tree_lookup+0xd/0xf [125671.834973] [<ffffffffa04ae6a6>] reada_peer_zones_set_lock+0x3e/0x60 [btrfs] [125671.834973] [<ffffffffa04ae8b9>] reada_pick_zone+0x29/0x103 [btrfs] [125671.834973] [<ffffffffa04af42f>] reada_start_machine_worker+0x129/0x2d3 [btrfs] [125671.834973] [<ffffffffa04880be>] btrfs_scrubparity_helper+0x185/0x3aa [btrfs] [125671.834973] [<ffffffffa0488341>] btrfs_readahead_helper+0xe/0x10 [btrfs] [125671.834973] [<ffffffff81069691>] process_one_work+0x271/0x4e9 [125671.834973] [<ffffffff81069dda>] worker_thread+0x1eb/0x2c9 [125671.834973] [<ffffffff81069bef>] ? rescuer_thread+0x2b3/0x2b3 [125671.834973] [<ffffffff8106f403>] kthread+0xd4/0xdc [125671.834973] [<ffffffff8149e242>] ret_from_fork+0x22/0x40 [125671.834973] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286 So fix this by taking the device_list_mutex in the readahead code. We can't use here the lighter approach of using a rcu_read_lock() and rcu_read_unlock() pair together with a list_for_each_entry_rcu() call because we end up doing calls to sleeping functions (kzalloc()) in the respective code path. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-15/+15
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-26Merge branch 'foreign/liubo/replace-lockup' into for-chris-4.6David Sterba1-5/+5
2016-02-26Merge branch 'foreign/zhaolei/reada' into for-chris-4.6David Sterba1-124/+124
2016-02-23Btrfs: fix lockdep deadlock warning due to dev_replaceLiu Bo1-5/+5
Xfstests btrfs/011 complains about a deadlock warning, [ 1226.649039] ========================================================= [ 1226.649039] [ INFO: possible irq lock inversion dependency detected ] [ 1226.649039] 4.1.0+ #270 Not tainted [ 1226.649039] --------------------------------------------------------- [ 1226.652955] kswapd0/46 just changed the state of lock: [ 1226.652955] (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1226.652955] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1226.652955] other info that might help us debug this: [ 1226.652955] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1226.652955] Possible interrupt unsafe locking scenario: [ 1226.652955] CPU0 CPU1 [ 1226.652955] ---- ---- [ 1226.652955] lock(&fs_info->dev_replace.lock); [ 1226.652955] local_irq_disable(); [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] lock(&found->groups_sem); [ 1226.652955] <Interrupt> [ 1226.652955] lock(&delayed_node->mutex); [ 1226.652955] *** DEADLOCK *** Commit 084b6e7c7607 ("btrfs: Fix a lockdep warning when running xfstest.") tried to fix a similar one that has the exactly same warning, but with that, we still run to this. The above lock chain comes from btrfs_commit_transaction ->btrfs_run_delayed_items ... ->__btrfs_update_delayed_inode ... ->__btrfs_cow_block ... ->find_free_extent ->cache_block_group ->load_free_space_cache ->btrfs_readpages ->submit_one_bio ... ->__btrfs_map_block ->btrfs_dev_replace_lock However, with high memory pressure, tasks which hold dev_replace.lock can be interrupted by kswapd and then kswapd is intended to release memory occupied by superblock, inodes and dentries, where we may call evict_inode, and it comes to [ 1226.652955] [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0 [ 1226.652955] [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30 [ 1226.652955] [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700 delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads to a ABBA deadlock. To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but things are simpler here since we only needs read's spinlock to blocking lock. With this, btrfs/011 no more produces warnings in dmesg. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-18btrfs: reada: ignore creating reada_extent for a non-existent deviceZhao Lei1-9/+8
For a non-existent device, old code bypasses adding it in dev's reada queue. And to solve problem of unfinished waitting in raid5/6, commit 5fbc7c59fd22 ("Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting") adding an exception for the first stripe, in short, the first stripe will always be processed whether the device exists or not. Actually we have a better way for the above request: just bypass creation of the reada_extent for non-existent device, it will make code simple and effective. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-18btrfs: reada: avoid undone reada extents in btrfs_reada_waitZhao Lei1-1/+8
Reada background works is not designed to finish all jobs completely, it will break in following case: 1: When a device reaches workload limit (MAX_IN_FLIGHT) 2: Total reads reach max limit (10000) 3: All devices don't have queued more jobs, often happened in DUP case And if all background works exit with remaining jobs, btrfs_reada_wait() will wait indefinetelly. Above problem is rarely happened in old code, because: 1: Every work queues 2x new works So many works reduced chances of undone jobs. 2: One work will continue 10000 times loop in case of no-jobs It reduced no-thread window time. But after we fixed above case, the "undone reada extents" frequently happened. Fix: Check to ensure we have at least one thread if there are undone jobs in btrfs_reada_wait(). Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 18:57:28 +0000