summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-11-25mfd: wm8994-core: Disable regulators before removing themViresh Kumar1-1/+1
The order in which resources were freed in wm8994_device_exit() isn't correct. The regulators are removed before they are disabled. Fix it by reordering code a bit, which makes it exact opposite of wm8994_device_init() as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-25mfd: syscon: Support native-endian regmapsPaul Burton1-1/+3
The regmap devicetree binding documentation states that a native-endian property should be supported as well as big-endian & little-endian, however syscon in its duplication of the parsing of these properties omits support for native-endian. Fix this by setting REGMAP_ENDIAN_NATIVE when a native-endian property is found. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-19Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Again a set of smaller fixes across several platforms (OMAP, Marvell, Allwinner, i.MX, etc). A handful of typo fixes and smaller missing contents from device trees, with some tweaks to OMAP mach files to deal with CPU feature print misformatting, potential NULL ptr dereference and one setup issue with UARTs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc' ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage ARM: omap3: Add missing memory node in SOM-LV arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers arm64: dts: marvell: fix clocksource for CP110 slave SPI0 arm64: dts: marvell: Fix typo in label name on Armada 37xx ASoC: omap-abe-twl6040: fix typo in bindings documentation dts: omap5: board-common: enable twl6040 headset jack detection dts: omap5: board-common: add phandle to reference Palmas gpadc ARM: OMAP2+: avoid NULL pointer dereference ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask ARM: dts: omap3: Fix memory node in Torpedo board ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig ARM: OMAP3: Fix formatting of features printed ARM: dts: imx53-qsb: Fix regulator constraints ARM: dts: sun8i: fix the pinmux for UART1
2016-11-19Merge branch 'i2c/for-current' of ↵Linus Torvalds5-6/+24
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some I2C driver bugfixes (and one documentation fix)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-mux-pca954x: fix deselect enabling for device-tree i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare i2c: mux: fix up dependencies i2c: Documentation: i2c-topology: fix minor whitespace nit i2c: mux: demux-pinctrl: make drivers with no pinctrl work again
2016-11-19i2c: i2c-mux-pca954x: fix deselect enabling for device-treeAlex Hemme1-2/+2
Deselect functionality can be ignored for device-trees with "i2c-mux-idle-disconnect" entries if no platform_data is available. By enabling the deselect functionality outside the platform_data block the logic works as it did in previous kernels. Fixes: 7fcac9807175 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Alex Hemme <ahemme@cisco.com> Signed-off-by: Ziyang Wu <ziywu@cisco.com> [touched up a few minor issues /peda] Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-19Merge branch 'linus' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Compiler warning in caam driver that was the last one remaining - Do not register aes-xts in caam drivers on unsupported platforms - Regression in algif_hash interface that may lead to an oops" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_hash - Fix NULL hash crash with shash crypto: caam - fix type mismatch warning crypto: caam - do not register AES-XTS mode on LP units
2016-11-19Merge tag 'dmaengine-fix-4.9-rc6' of ↵Linus Torvalds4-6/+29
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Some driver fixes which we pending in my tree: - return error code fix in edma driver - Kconfig fix for genric allocator in mmp_tdma - fix uninitialized value in sun6i - Runtime pm fixes for cppi" * tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: cppi41: More PM runtime fixes dmaengine: cpp41: Fix handling of error path dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected dmaengine: cppi41: Fix list not empty warning on module removal dmaengine: sun6i: fix the uninitialized value for v_lli dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig dmaengine: edma: Fix error return code in edma_alloc_chan_resources()
2016-11-18Merge tag 'acpi-4.9-rc6' of ↵Linus Torvalds2-12/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "They fix an ACPI thermal management regression introduced by a recent FADT handling cleanup, an ACPI tools build issue introduced by a recent ACPICA commit and a PCC mailbox initialization bug causing lockdep to complain loudly. Specifics: - Revert a recent ACPICA cleanup that attempted to get rid of all FADT version 2 legacy, but broke ACPI thermal management on at least one system (Rafael Wysocki). - Fix cross-compiled builds of ACPI tools that stopped working after a recent cleanup related to the handling of header files in ACPICA (Lv Zheng). - Fix a locking issue in the PCC channel initialization code that invokes devm_request_irq() under a spinlock (among other things) and causes lockdep to complain (Hoan Tran)" * tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power/acpi: Remove direct kernel source include reference mailbox: PCC: Fix lockdep warning when request PCC channel Revert "ACPICA: FADT support cleanup"
2016-11-18Merge branches 'acpica-fixes', 'acpi-cppc-fixes' and 'acpi-tools-fixes'Rafael J. Wysocki1-6/+7
* acpica-fixes: Revert "ACPICA: FADT support cleanup" * acpi-cppc-fixes: mailbox: PCC: Fix lockdep warning when request PCC channel * acpi-tools-fixes: tools/power/acpi: Remove direct kernel source include reference
2016-11-18Merge tag 'gpio-v4.9-4' of ↵Linus Torvalds5-10/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "These are hopefully the last GPIO fixes for v4.9. The most important is that it fixes the UML randconfig builds that have been nagging me for some time and me being confused about where the problem was really sitting, now this fix give this nice feeling that everything is solid and builds fine. Summary: - Finally, after being puzzled by a bunch of recurrent UML build failures on randconfigs from the build robot, Keno Fischer nailed it: GPIO_DEVRES is optional and depends on HAS_IOMEM even though many users just unconditionally rely on it to be available. And it *should* be available: garbage collection is nice for this and it *certainly* has nothing to do with having IOMEM. So we got rid of it, and now the UML builds should JustWork(TM). - Do not call .get_direction() on sleeping GPIO chips on the fastpath when locking GPIOs for interrupts: it is done from atomic context, no way. - Some driver fixes" * tag 'gpio-v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Remove GPIO_DEVRES option gpio: tc3589x: fix up .get_direction() gpio: do not double-check direction on sleeping chips gpio: pca953x: Move memcpy into mutex lock for set multiple gpio: pca953x: Fix corruption of other gpios in set_multiple.
2016-11-18i2c: digicolor: use clk_disable_unprepare instead of clk_unprepareWei Yongjun1-1/+1
since clk_prepare_enable() is used to get i2c->clk, we should use clk_disable_unprepare() to release it for the error path. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-18Merge tag 'drm-intel-fixes-2016-11-17' of ↵Dave Airlie5-20/+33
ssh://git.freedesktop.org/git/drm-intel into drm-fixes i915 misc fixes. * tag 'drm-intel-fixes-2016-11-17' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT drm/i915: Refresh that status of MST capable connectors in ->detect() drm/i915: Grab the rotation from the passed plane state for VLV sprites drm/i915: Mark CPU cache as dirty when used for rendering
2016-11-17ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'Cédric Le Goater1-2/+2
The Aspeed SoCs have two BT interfaces : one is IPMI compliant and the other is H8S/2168 compliant. The current ipmi/bt-bmc driver implements the IPMI version and we should reflect its nature in the compatible node name using 'aspeed,ast2400-ibt-bmc' instead of 'aspeed,ast2400-bt-bmc'. The latter should be used for a H8S interface driver if it is implemented one day. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Revert "drm/mediatek: set vblank_disable_allowed to true"Dave Airlie1-1/+0
This reverts commit f752fff611b99f5679224f3990a1f531ea64b1ec. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-11-18Revert "drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE"Dave Airlie1-1/+1
This reverts commit 83ba62bc700bab710b22be3a1bf6cf973f754273. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-11-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds4-23/+65
Pull block fixes from Jens Axboe: "A set of fixes, one for NVMe from Keith, and a set for nvme-{rdma,t,f} from the usual suspects, fixing actual problems that would be a shame to release 4.9 with" * 'for-linus' of git://git.kernel.dk/linux-block: nvme/pci: Don't free queues on error nvmet-rdma: drain the queue-pair just before freeing it nvme-rdma: stop and free io queues on connect failure nvmet-rdma: don't forget to delete a queue from the list of connection failed nvmet: Don't queue fatal error work if csts.cfs is set nvme-rdma: reject non-connect commands before the queue is live nvmet-rdma: Fix possible NULL deref when handling rdma cm events
2016-11-17Merge tag 'for-linus' of ↵Linus Torvalds37-395/+391
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rmda fixes from Doug Ledford. "First round of -rc fixes. Due to various issues, I've been away and couldn't send a pull request for about three weeks. There were a number of -rc patches that built up in the meantime (some where there already from the early -rc stages). Obviously, there were way too many to send now, so I tried to pare the list down to the more important patches for the -rc cycle. Most of the code has had plenty of soak time at the various vendor's testing setups, so I doubt there will be another -rc pull request this cycle. I also tried to limit the patches to those with smaller footprints, so even though a shortlog is longer than I would like, the actual diffstat is mostly very small with the exception of just three files that had more changes, and a couple files with pure removals. Summary: - Misc Intel hfi1 fixes - Misc Mellanox mlx4, mlx5, and rxe fixes - A couple cxgb4 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits) iw_cxgb4: invalidate the mr when posting a read_w_inv wr iw_cxgb4: set *bad_wr for post_send/post_recv errors IB/rxe: Update qp state for user query IB/rxe: Clear queue buffer when modifying QP to reset IB/rxe: Fix handling of erroneous WR IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksum IB/mlx4: Fix create CQ error flow IB/mlx4: Check gid_index return value IB/mlx5: Fix NULL pointer dereference on debug print IB/mlx5: Fix fatal error dispatching IB/mlx5: Resolve soft lock on massive reg MRs IB/mlx5: Use cache line size to select CQE stride IB/mlx5: Validate requested RQT size IB/mlx5: Fix memory leak in query device IB/core: Avoid unsigned int overflow in sg_alloc_table IB/core: Add missing check for addr_resolve callback return value IB/core: Set routable RoCE gid type for ipv4/ipv6 networks IB/cm: Mark stale CM id's whenever the mad agent was unregistered IB/uverbs: Fix leak of XRC target QPs IB/hfi1: Remove incorrect IS_ERR check ...
2016-11-17crypto: caam - fix type mismatch warningArnd Bergmann1-1/+1
Building the caam driver on arm64 produces a harmless warning: drivers/crypto/caam/caamalg.c:140:139: warning: comparison of distinct pointer types lacks a cast We can use min_t to tell the compiler which type we want it to use here. Fixes: 5ecf8ef9103c ("crypto: caam - fix sg dump") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-17dmaengine: cppi41: More PM runtime fixesTony Lindgren1-4/+7
Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter <dan.carpenter@oracle.com>. And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-16Merge tag 'drm-fixes-for-v4.9-rc6' of ↵Linus Torvalds17-212/+117
git://people.freedesktop.org/~airlied/linux Pull drm fixes fr9om Dave Airlie: "Fixes for amdgpu, and a bunch of arm drivers. There seems to be an uptick in the ARM drivers sending things for fixes which is good, so I've decided to dequeue a bit early, more stuff may arrive before the weekend. This contains mediatek, arcpgu, sunxi, fsl-dcu display controller fixes along with 3 amdgpu fixes, one for a fencing issue with secondary GPUs" * tag 'drm-fixes-for-v4.9-rc6' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu:fix vpost_needed routine drm/amdgpu/powerplay: drop a redundant NULL check drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5) drm/arcpgu: Accommodate adv7511 switch to DRM bridge drm/fsl-dcu: disable planes before disabling CRTC drm/fsl-dcu: update all registers on flush drm/fsl-dcu: do not update when modifying irq registers drm/sun4i: Propagate error to the caller drm/sun4i: Fix error handling drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range drm/mediatek: enhance the HDMI driving current drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable drm/mediatek: clear IRQ status before enable OVL interrupt drm/mediatek: set vblank_disable_allowed to true drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE drm/sun4i: rgb: Remove the bridge enable/disable functions drm/sun4i: rgb: Enable panel after controller
2016-11-16iw_cxgb4: invalidate the mr when posting a read_w_inv wrSteve Wise4-23/+24
Also, rearrange things a bit to have a common c4iw_invalidate_mr() function used everywhere that we need to invalidate. Fixes: 49b53a93a64a ("iw_cxgb4: add fast-path for small REG_MR operations") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16iw_cxgb4: set *bad_wr for post_send/post_recv errorsSteve Wise1-0/+4
There are a few cases in c4iw_post_send() and c4iw_post_receive() where *bad_wr is not set when an error is returned. This can cause a crash if the application tries to use bad_wr. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16Merge branches 'hfi1' and 'mlx' into k.o/for-4.9-rcDoug Ledford17-50/+203
2016-11-16IB/rxe: Update qp state for user queryYonatan Cohen1-0/+1
The method rxe_qp_error() transitions QP to error state and make sure the QP is drained. It did not though update the QP state for user's query. This patch fixes this. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/rxe: Clear queue buffer when modifying QP to resetYonatan Cohen3-0/+12
RXE resets the send-q only once in rxe_qp_init_req() when QP is created, but when the QP is reused after QP reset, the send-q holds previous garbage data. This garbage data wrongly fails CQEs that otherwise should have completed successfully. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/rxe: Fix handling of erroneous WRYonatan Cohen1-8/+13
To correctly handle a erroneous WR this fix does the following 1. Make sure the bad WQE causes a user completion event. 2. Call rxe_completer to handle the erred WQE. Before the fix, when rxe_requester found a bad WQE, it changed its status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs. If this was the 1st WQE then there would be no ACK to invoke the completer and this bad WQE would be stuck in the QP's send-q. On top of that the requester exiting with 0 caused rxe_do_task to endlessly invoke rxe_requester, resulting in a soft-lockup attached below. In case the WQE was not the 1st and rxe_completer did get a chance to handle the bad WQE, it did not cause a complete event since the WQE's IB_SEND_SIGNALED flag was not set. Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec version 1.2.1, section 10.7.3.1 Signaled Completions. NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe] [<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe] [<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe] [<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe] [<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60 [<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe] [<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe] [<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe] [<ffffffff811ef922>] ? __kmalloc+0x182/0x200 [<ffffffff816ba512>] ? down_read+0x12/0x40 [<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs] [<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80 [<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs] [<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0 [<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50 [<ffffffff81215b87>] __vfs_write+0x37/0x140 [<ffffffff81216892>] vfs_write+0xb2/0x1b0 [<ffffffff81217ce5>] SyS_write+0x55/0xc0 [<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksumYonatan Cohen1-6/+2
Missing initialization of udp_tunnel_sock_cfg causes to following kernel panic, while kernel tries to execute gro_receive(). While being there, we converted udp_port_cfg to use the same initialization scheme as udp_tunnel_sock_cfg. ------------[ cut here ]------------ kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffffffa0588c50 IP: [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] PGD 1c09067 PUD 1c0a063 PMD bb394067 PTE 80000000ad5e8163 Oops: 0011 [#1] SMP Modules linked in: ib_rxe ip6_udp_tunnel udp_tunnel CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc3+ #2 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 task: ffff880235e4e680 ti: ffff880235e68000 task.ti: ffff880235e68000 RIP: 0010:[<ffffffffa0588c50>] [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP: 0018:ffff880237343c80 EFLAGS: 00010282 RAX: 00000000dffe482d RBX: ffff8800ae330900 RCX: 000000002001b712 RDX: ffff8800ae330900 RSI: ffff8800ae102578 RDI: ffff880235589c00 RBP: ffff880237343cb0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ae33e262 R13: ffff880235589c00 R14: 0000000000000014 R15: ffff8800ae102578 FS: 0000000000000000(0000) GS:ffff880237340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0588c50 CR3: 0000000001c06000 CR4: 00000000000006e0 Stack: ffffffff8160860e ffff8800ae330900 ffff8800ae102578 0000000000000014 000000000000004e ffff8800ae102578 ffff880237343ce0 ffffffff816088fb 0000000000000000 ffff8800ae330900 0000000000000000 00000000ffad0000 Call Trace: <IRQ> [<ffffffff8160860e>] ? udp_gro_receive+0xde/0x130 [<ffffffff816088fb>] udp4_gro_receive+0x10b/0x2d0 [<ffffffff81611373>] inet_gro_receive+0x1d3/0x270 [<ffffffff81594e29>] dev_gro_receive+0x269/0x3b0 [<ffffffff81595188>] napi_gro_receive+0x38/0x120 [<ffffffffa011caee>] mlx5e_handle_rx_cqe+0x27e/0x340 [mlx5_core] [<ffffffffa011d076>] mlx5e_poll_rx_cq+0x66/0x6d0 [mlx5_core] [<ffffffffa011d7ae>] mlx5e_napi_poll+0x8e/0x400 [mlx5_core] [<ffffffff815949a0>] net_rx_action+0x160/0x380 [<ffffffff816a9197>] __do_softirq+0xd7/0x2c5 [<ffffffff81085c35>] irq_exit+0xf5/0x100 [<ffffffff816a8f16>] do_IRQ+0x56/0xd0 [<ffffffff816a6dcc>] common_interrupt+0x8c/0x8c <EOI> [<ffffffff81061f96>] ? native_safe_halt+0x6/0x10 [<ffffffff81037ade>] default_idle+0x1e/0xd0 [<ffffffff8103828f>] arch_cpu_idle+0xf/0x20 [<ffffffff810c37dc>] default_idle_call+0x3c/0x50 [<ffffffff810c3b13>] cpu_startup_entry+0x323/0x3c0 [<ffffffff81050d8c>] start_secondary+0x15c/0x1a0 RIP [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP <ffff880237343c80> CR2: ffffffffa0588c50 ---[ end trace 489ee31fa7614ac5 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ------------[ cut here ]------------ Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx4: Fix create CQ error flowMatan Barak1-1/+4
Currently, if ib_copy_to_udata fails, the CQ won't be deleted from the radix tree and the HW (HW2SW). Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx4: Check gid_index return valueDaniel Jurgens1-1/+4
Check the returned GID index value and return an error if it is invalid. Fixes: 5070cd2239bd ('IB/mlx4: Replace mechanism for RoCE GID management') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix NULL pointer dereference on debug printEli Cohen1-2/+2
For XRC QP CQs may not exist. Check before attempting dereference. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix fatal error dispatchingEli Cohen1-2/+5
When an internal error condition is detected, make sure to set the device inactive after dispatching the event so ULPs can get a notification of this event. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Resolve soft lock on massive reg MRsMoshe Lazer2-1/+7
When calling reg_mr of large MRs (e.g. 4GB) from multiple processes and MR caches can't supply the required amount of MRs the slow-path of MR allocation may be used. In this case we need to serialize the slow-path between the processes to avoid soft lock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Use cache line size to select CQE strideDaniel Jurgens1-2/+1
When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Validate requested RQT sizeMaor Gottlieb1-0/+8
Validate that the requested size of RQT is supported by firmware. Fixes: c5f9092936fe ('IB/mlx5: Add Receive Work Queue Indirection table operations') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix memory leak in query deviceMajd Dibbiny1-2/+2
We need to free dev->port when we fail to enable RoCE or initialize node data. Fixes: 0837e86a7a34 ('IB/mlx5: Add per port counters') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/core: Avoid unsigned int overflow in sg_alloc_tableMark Bloch1-1/+1
sg_alloc_table gets unsigned int as parameter while the driver returns it as size_t. Check npages isn't greater than maximum unsigned int. Fixes: eeb8461e36c9 ("IB: Refactor umem to use linear SG table") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/core: Add missing check for addr_resolve callback return valueMark Bloch1-2/+9
When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh, the return status of the request was ignored in the callback function causing a successful return and an empty dmac. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/core: Set routable RoCE gid type for ipv4/ipv6 networksLeon Romanovsky1-1/+20
On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote: > From: Mark Bloch <markb@mellanox.com> > > If the underlying netowrk type is ipv4 or ipv6 and the device supports > routable RoCE, prefer it so the traffic could cross subnets. > > Signed-off-by: Mark Bloch <markb@mellanox.com> > Signed-off-by: Maor Gottlieb <maorg@mellanox.com> > Signed-off-by: Leon Romanovsky <leon@kernel.org> > --- Hi Doug, Please take the following v1 of this patch where I fixed spelling error from "netowrk" to be "network". Thanks. >From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001 From: Mark Bloch <markb@mellanox.com> Date: Sun, 11 Sep 2016 06:25:10 +0000 Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6 networks If the underlying network type is ipv4 or ipv6 and the device supports routable RoCE, prefer it so the traffic could cross subnets. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/cm: Mark stale CM id's whenever the mad agent was unregisteredMark Bloch1-16/+110
When there is a CM id object that has port assigned to it, it means that the cm-id asked for the specific port that it should go by it, but if that port was removed (hot-unplug event) the cm-id was not updated. In order to fix that the port keeps a list of all the cm-id's that are planning to go by it, whenever the port is removed it marks all of them as invalid. This commit fixes a kernel panic which happens when running traffic between guests and we force reboot a guest mid traffic, it triggers a kernel panic: Call Trace: [<ffffffff815271fa>] ? panic+0xa7/0x16f [<ffffffff8152b534>] ? oops_end+0xe4/0x100 [<ffffffff8104a00b>] ? no_context+0xfb/0x260 [<ffffffff81084db2>] ? del_timer_sync+0x22/0x30 [<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0 [<ffffffff81084240>] ? process_timeout+0x0/0x10 [<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20 [<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480 [<ffffffff81065df0>] ? default_wake_function+0x0/0x20 [<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core] [<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core] [<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0 [<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0 [<ffffffff8152a815>] ? page_fault+0x25/0x30 [<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm] [<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm] [<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm] [<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm] [<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib] [<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib] [<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib] [<ffffffff81094d20>] ? worker_thread+0x170/0x2a0 [<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0 [<ffffffff8109aef6>] ? kthread+0x96/0xa0 [<ffffffff8100c20a>] ? child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/uverbs: Fix leak of XRC target QPsTariq Toukan1-5/+2
The real QP is destroyed in case of the ref count reaches zero, but for XRC target QPs this call was missed and caused to QP leaks. Let's call to destroy for all flows. Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-17Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie5-24/+28
into drm-fixes Just a few bug fixes for 4.9. The big one is Mario's prime fencing fix. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu:fix vpost_needed routine drm/amdgpu/powerplay: drop a redundant NULL check drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
2016-11-17Merge branch 'mediatek-drm-fixes-2016-11-11' of ↵Dave Airlie6-21/+51
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes This branch include one patch to fix a typo, two patches to disable vblank interrupt, and three patches to support HDMI 4K resolution. * 'mediatek-drm-fixes-2016-11-11' of https://github.com/ckhu-mediatek/linux.git-tags: drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range drm/mediatek: enhance the HDMI driving current drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable drm/mediatek: clear IRQ status before enable OVL interrupt drm/mediatek: set vblank_disable_allowed to true drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
2016-11-16gpio: Remove GPIO_DEVRES optionKeno Fischer2-5/+1
This option was added in 6a89a314ab107a12af08c71420c19a37a30fc2d3 to allow use of the devm_gpio_* functions without CONFIG_GPIOLIB. However, only a few months later in b69ac52449c658b7ac40034dc3c5f5f4a71a723d, CONFIG_GPIOLIB was added as a dependency, defeating the original purpose of this option. Instead of that patch, the original commit could have just been reverted (and in fact was partially so in 403c1d0be5ccbd750d25c59d8358843a81e52e3b). Further, since this option has a dependency on HAS_IOMEM, even though it does not require it, it causes build failures when !HAS_IOMEM (e.g. in a uml build). Fix that by completely removing the option, in essence completing the reversion of the original commit. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-16nvme/pci: Don't free queues on errorKeith Busch1-14/+4
The nvme_remove function tears down all allocated resources in the correct order, so no need to free queues on error during initialization. This fixes possible use-after-free errors when queues are still associated with a blk-mq hctx. Reported-by: Scott Bauer <scott.bauer@intel.com> Tested-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-16Merge tag 'mfd-fixes-4.9' of ↵Linus Torvalds5-27/+17
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: - Fix PCI properties in intel-lpss-pci - Fix Resetting issue during suspend in intel-lpss-pci - Seperate IRQs for USBC device and CHRG in intel_soc_pmic_bxtwc - Add timeout to fix Resetting issue in stmpe - Ensure we 'put' reference to device when done in mfd-core * tag 'mfd-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: core: Fix device reference leak in mfd_clone_cell mfd: stmpe: Fix RESET regression on STMPE2401 mfd: intel_soc_pmic_bxtwc: Fix usbc interrupt mfd: intel-lpss: Do not put device in reset state on suspend mfd: lpss: Fix Intel Kaby Lake PCH-H properties
2016-11-16mfd: core: Fix device reference leak in mfd_clone_cellJohan Hovold1-0/+2
Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: stmpe: Fix RESET regression on STMPE2401Linus Walleij1-0/+2
Since commit c4dd1ba355aae2bc3d1213da6c66c53e3c31e028 ("mfd: stmpe: Add reset support for all STMPE variant") we're resetting the STMPE expanders before use. This caused a regression on the STMP2401 on the Nomadik NHK8815: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission It turns out that we start to poll for the reset bit to go low again too quickly: the STMPE2401 is not yet online and ready to be asked for the status of the RESET bit. By introducing a 10ms delay before starting to hammer the register for information, we get back to normal: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 Cc: stable@vger.kernel.org Cc: Amelie Delaunay <amelie.delaunay@st.com> Fixes: c4dd1ba355aa ("mfd: stmpe: Add reset support for all STMPE variant") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel_soc_pmic_bxtwc: Fix usbc interruptHeikki Krogerus1-2/+4
The wcove USB Type-C driver is currently being flooded with interrupts that are not targeted to it. The reason for that is because all CHRG first level interrupts are mapped to it. This fixes the issue by introducing separate irq for the usbc device, and mapping only USB Type-C PHY interrupts to it. Fixes: 9c6235c86332 ("mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel-lpss: Do not put device in reset state on suspendAzhar Shaikh1-3/+0
Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") saved the register context while going to suspend and also put the device in reset state. Due to the resetting of device, system cannot enter S3/S0ix states when no_console_suspend flag is enabled. The system and serial console both hang. The resetting of device is not needed while going to suspend. Hence remove this code. Cc: stable@vger.kernel.org Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: lpss: Fix Intel Kaby Lake PCH-H propertiesJarkko Nikula1-22/+9
There are a few issues on Intel Kaby Lake PCH-H properties added by commit a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs"): - Input clock of I2C controller on Intel Kaby Lake PCH-H is 120 MHz not 133 MHz. This was probably copy-paste error from Intel Broxton I2C properties. - There is no default I2C SDA hold time specified which is used when ACPI doesn't provide it. I got information from Windows driver team that Kaby Lake PCH-H can use the same configuration than Intel Sunrisepoint PCH. - Common HS-UART properties are not used. Fix these by reusing the Sunrisepoint properties on Kaby Lake PCH-H. Fixes: a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") Reported-by: Xiang A Wang <xiang.a.wang@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 09:05:00 +0000