summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-02-21backlight: lp855x_bl: simplify bl_get_brightness()Kim, Milo1-24/+0
Getting the brightness value is not critical, no need to read the actual register value. To simplify it, just return the 'bl->props.brightness' value. Then, lp855x_read_byte() can be removed, not used any more. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lp855x_bl: support new LP8557 deviceKim, Milo2-16/+73
LP8557 is one of LP855x family device, but it has different register map and initialization process. To support this device, device specific configuration is done through the lp855x_device_config structure. Few register definitions are fixed for better readability. BRIGHTNESS_CTRL -> LP855X_BRIGHTNESS_CTRL DEVICE_CTRL -> LP855X_DEVICE_CTRL EEPROM_START -> LP855X_EEPROM_START EEPROM_END -> LP855X_EEPROM_END EPROM_START -> LP8556_EPROM_START EPROM_END -> LP8556_EPROM_END And LP8557 register definitions are added. New register function, lp855x_update_bit() is added. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lp855x_bl: introduce device configuration flowKim, Milo1-10/+68
At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/adp88?0_bl.c: fix resumeLars-Peter Clausen2-2/+2
Clearing the NSTBY bit in the control register also automatically clears the BLEN bit. So we need to make sure to set it again during resume, otherwise the backlight will stay off. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/lm3630_bl.c: remove ret = -EIO of ↵Jingoo Han1-2/+2
lm3630_backlight_register() There is no need to return -EIO, because backlight_device_register() already returns correct error values. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Jeong <daniel.jeong@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/s6e63m0.c: report ->gamma_table_count correctlyDan Carpenter1-1/+1
gamma_table has 3 arrays which each hold MAX_GAMMA_LEVEL pointers to int. The current code sets ->gamma_table_count to 6 on 64bit arches and to 3 on 32 bit arches. It should be 3 on everything. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/88pm860x_bl.c: add missing of_node_put()Axel Lin1-1/+4
of_find_node_by_name() returns a node pointer with refcount incremented, use of_node_put() on it when done. of_find_node_by_name() will call of_node_put() against the node pass to from parameter, thus we also need to call of_node_get(from) before calling of_find_node_by_name(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: add an AS3711 PMIC backlight driverGuennadi Liakhovetski3-0/+388
This is an initial commit of a backlight driver, using step-up DCDC power supplies on AS3711 PMIC. Only one mode has actually been tested, several further modes have been implemented "dry," but disabled to avoid accidental hardware damage. Anyone wishing to use any of those modes will have to modify the driver. Tested on sh73a0-based kzm9g board. Only one mode has been tested and is enabled. That mode copies the sample code from the manufacturer. Deviations from that code proved to be fatal for the hardware... Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/Makefile: cleanupAndrew Morton1-45/+45
Fix up indenting. Also alphasort all entries, which reduces patch collisions. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21fb: backlight: add the Himax HX-8357B LCD controllerMaxime Ripard3-0/+505
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/ld9040.c: use devm_regulator_bulk_get() APISachin Kamat1-8/+3
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/l4f00242t03.c: convert to devm_regulator_get()Axel Lin1-19/+5
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/lm3639_bl.c: remove ret = -EIO at error paths of probeDevendra Naga1-4/+1
The APIs are returning correctly the err codes, no need to assign -EIO to the ret again. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Daniel Jeong <daniel.jeong@ti.com> Cc: G.Shark Jeong <gshark.jeong@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: corgi_lcd: use lcd_get_data instead of dev_get_drvdataJingoo Han1-3/+3
Use the wrapper function for getting the driver data using lcd_device instead of using dev_get_drvdata with &ld->dev, so we can directly pass a struct lcd_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: omap1: use bl_get_data instead of dev_get_drvdataJingoo Han1-5/+5
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: tosa: use bl_get_data instead of dev_get_drvdataJingoo Han1-1/+1
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: corgi_lcd: use bl_get_data instead of dev_get_drvdataJingoo Han1-2/+2
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: use bl_get_data instead of dev_get_drvdataJingoo Han1-1/+1
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21pwm_backlight: use bl_get_data instead of dev_get_drvdataJingoo Han1-4/+4
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: aat2870: use bl_get_data instead of dev_get_drvdataJingoo Han1-1/+1
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lms501kf03: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: corgi_lcd: use spi_get_drvdata and spi_set_drvdataJingoo Han1-4/+4
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: tosa: use spi_get_drvdata and spi_set_drvdataJingoo Han1-6/+6
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: vgg2432a4: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+4
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lms283gf05: use spi_get_drvdata and spi_set_drvdataJingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: tdo24m: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ltv350qv: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: use spi_get_drvdata and spi_set_drvdataJingoo Han1-5/+5
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: l4f00242t03: use spi_get_drvdata and spi_set_drvdataJingoo Han1-6/+6
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: reorder inclusions of <linux/xxx.h>Jingoo Han1-14/+5
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: remove redundant variable 'before_power'Jingoo Han1-21/+3
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: replace EFAULT with EINVALJingoo Han1-3/+3
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: remove unnecessary NULL deference checkJingoo Han1-24/+8
Remove unnecessary NULL deference check, because it was already checked in ams369fg06_probe(). Also, unnecessary parentheses are removed in ams369fg06_power_is_on(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: use sleep instead of delayJingoo Han1-5/+6
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: reorder inclusions of <linux/xxx.h>Jingoo Han1-14/+5
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: remove redundant variable 'before_power'Jingoo Han1-21/+3
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: replace EFAULT with EINVALJingoo Han1-3/+3
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: remove unnecessary NULL deference checkJingoo Han1-27/+14
Remove unnecessary NULL deference check, because it was already checked in s6e63m0_probe(). Also, POWER_IS_ON is replaced with s6e63m0_power_is_on(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: use sleep instead of delayJingoo Han1-5/+6
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: use lowercase names of structsJingoo Han1-20/+20
Lowercase names of structs should be used, because they are not preprocessor macros. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: reorder inclusions of <linux/xxx.h>Jingoo Han1-14/+5
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: remove redundant return variablesJingoo Han1-20/+4
Redundant return variables are removed to reduce the code. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: replace EFAULT with EINVALJingoo Han1-2/+2
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: remove unnecessary NULL deference checkJingoo Han1-15/+13
Removee unnecessary NULL deference check, because it was already checked in ld9040_probe(). Also, power_is_on is replaced with ld9040_power_is_on(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: use sleep instead of delayJingoo Han1-6/+7
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: add lms501kf03 LCD driverJingoo Han3-0/+450
Add the lms501kf03 LCD panel driver. The lms501kf03 LCD panel (800 x 480) driver uses 3-wired SPI inteface. [akpm@linux-foundation.org: remove unused variable `before_power'] [akpm@linux-foundation.org: make lms501kf03_shutdown() static, per Fengguang] Signed-off-by: Ilho Lee <Ilho215.lee@samsung.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: "devendra.aaru" <devendra.aaru@gmail.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21sun.com documentation fixesChristian Kujau1-2/+2
After I came across a help text for SUNGEM mentioning a broken sun.com URL, I felt like fixing those up, as they are now pointing to oracle.com URLs. Signed-off-by: Christian Kujau <lists@nerdbynature.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/mx3fb.c: use NULL for pointerFabio Estevam1-1/+1
Fix the following sparse error: drivers/video/mx3fb.c:1309:28: warning: Using plain integer as NULL pointer Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 10:45:54 +0000