summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-02-17[SCSI] hpsa: clarify obscure comment in adjust_hpsa_scsi_tableStephen M. Cameron1-1/+5
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: print all the bytes of the CDB, not just the first one.Mike Miller1-1/+5
Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: when resetting devices, print out which deviceStephen M. Cameron1-2/+2
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: use scan_start and scan_finished entry points for scanningStephen M. Cameron2-3/+55
use scan_start and scan_finished entry points for scanning and route the CCISS_REGNEWD ioctl and sysfs triggering of same functionality through hpsa_scan_start. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Add an shost_to_hba helper function.Stephen M. Cameron1-2/+7
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Don't return DID_NO_CONNECT when a device is merely not readyMatt Gates1-1/+0
Signed-off-by: Matt Gates <matthew.gates@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Retry commands completing with a sense key of ABORTED_COMMANDMatt Gates1-2/+9
Signed-off-by: Matt Gates <matthew.gates@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Return DID_RESET for commands which complete with status of ↵Matt Gates1-1/+1
UNSOLICITED ABORT The commands should be retried, and this will make that happen, instead of resulting in an i/o error. Signed-off-by: Matt Gates <matthew.gates@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Fix p1210m LUN assignment.Stephen M. Cameron2-20/+98
The p1210m responsds to SCSI report LUNs, unlike traditional Smart Array controllers. This means that the bus, target, and lun assignments done by the driver cannot be arbitrary, but must match what SCSI REPORT LUNS returns. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: add pci ids for storageworks 1210m, remove p400, p800, p700mMike Miller1-6/+5
and update pci_ids.h to include new PCI ID for StorageWorks 1210m variant. Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Allow multiple command completions per interrupt.Don Brace3-66/+404
This is done by adding support for the so-called "performant mode" (that's really what they called it). Smart Array controllers have a mode which enables multiple command completions to be delivered with a single interrupt, "performant" mode. We want to use that mode, as some newer controllers will be requiring this mode. Signed-off-by: Don Brace <brace@beardog.cce.hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: interrupt pending function should return bool not unsigned longStephen M. Cameron2-6/+4
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: fix some debug printks to use dev_dbg insteadStephen M. Cameron1-9/+4
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: make tag macros into functionsStephen M. Cameron2-7/+22
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: eliminate unnecessary memcpysStephen M. Cameron1-8/+3
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: remove unwanted debug codeStephen M. Cameron1-6/+0
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: use kzalloc not kmalloc plus memsetStephen M. Cameron1-3/+2
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: use sizeof() not an inline constant in memset.Stephen M. Cameron1-3/+2
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: return proper error codes not minus one.Stephen M. Cameron1-15/+22
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: remove superfluous returns from void functions.Stephen M. Cameron1-4/+1
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: make adjust_hpsa_scsi_table return void.Stephen M. Cameron1-2/+1
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Use BUG_ON instead of an if statement.Stephen M. Cameron1-2/+1
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: avoid unwanted promotion from unsigned to signed for raid level ↵Stephen M. Cameron1-2/+2
index Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: Use kernel integer types, not userland onesStephen M. Cameron3-120/+120
That is, use u64, u32, u16 and u8 rather than __u64, __u32, __u16 and __u8. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] hpsa: fix typo in commentsStephen M. Cameron1-1/+1
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] qla2xxx: negative error return in qla2x00_change_queue_depth()Roel Kluin1-1/+1
The *change_queue_depth functions usually return a negative error return. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] megaraid_sas: version and documentation updateYang, Bo2-4/+4
Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] megaraid_sas: driver fixed the device update issueYang, Bo1-0/+142
driver fixed the device update issue after get the AEN PD delete/ADD and LD add/delete from FW. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] megaraid_sas: add the logical drive list to driverYang, Bo2-0/+125
Driver issue the get ld list to fw to get the logic drive list. Driver will keep the logic drive list for the internal use after driver load. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] megaraid_sas: Zero pad_0 in mfi structureYang, Bo1-0/+7
Add the pad_0 in mfi frame structure to 0 to fix the context value larger than 32bit value issue. Signed-off-by Bo Yang<bo.yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: Update Driver version to 8.3.8James Smart1-2/+2
Update Driver version to 8.3.8 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG4) Add new vendor specific BSG CommandsJames Smart1-14/+1569
Add the following new vendor specific BSG commands. - Add LPFC_BSG_VENDOR_GET_MGMT_REV command - Add LPFC_BSG_VENDOR_MBOX command - Add LPFC_BSG_VENDOR_DIAG_MODE command - Add LPFC_BSG_VENDOR_DIAG_TEST command Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG3) Modify BSG commands to operate asynchronouslyJames Smart1-271/+592
Modify the following BSG commands to operate asynchronously. - FC_BSG_RPT_ELS - FC_BSG_RPT_CT - LPFC_BSG_VENDOR_GET_CT_EVENT - LPFC_BSG_VENDOR_SET_CT_EVENT Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG2) Create lpfc_bsg.hJames Smart1-0/+98
Create lpfc_bsg.h - structures, etc used by bsg-related routines. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG1) Update BSG infrastructureJames Smart7-54/+47
Update BSG infrastructure to handle new vendor specific BSG commands. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: Add code to display logical link speedJames Smart4-0/+13
Display Logical Link Speed when supported and is non-zero. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: BugFixes: Discovery relates changesJames Smart8-18/+265
Discovery relates changes: - Separated VPI_REGISTERED state of physical port into VFI_REGISTERED and VPI_REGISTERED state so that driver can unregister physical port VPI independent of VFI. - Add code to unregister, re-init and re-register physical port VPI when physical port NportID change. - Add code to unregister and re-register VPI of a vport when its Nport ID change. - Add code in FDISC completion path to re-start FLOGI discovery when a FDISC complete with LOGIN_REQUIRED reason code. - Fix a memory leak in lpfc_init_vpi_cmpl - Add code to start a timer for vport to retry FDISC when CVL is received by a vport or physical port. If all Nports receive CVLs, then all timers are cancelled and a logical link level discovery will be started after one second. - Flush ELS commands after killing all delayed ELS commands. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: BugFixes: SLI relates changesJames Smart8-87/+170
Fix hardware/SLI relates issues: - Handle XB bit so that ELS XRIs are not prematurely released. - Handle XB bit so that FCP XRIs are not prematurely released. - Define new security SLI Commands. - Remove unused security SLI commands - Skip receive data size parameter check on received FLOGI. - Added LPFC_USE_FCPWQIDX flag to iocb to force SLI layer to submit abort WQE on same WQ as the command WQE. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] qla1280: Drop host_lock while requesting firmwareBen Hutchings1-0/+4
request_firmware() may sleep and it appears to be safe to release the spinlock here. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: correction in the claculation for num_cxn_wrbJayamohan Kallickal1-7/+6
This patch correct the math done for num_cxn_wrb Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: changing the chip opcode for TEXTJayamohan Kallickal1-2/+1
This patch corrects the chipopcode for text and chooses correct paramters for that command Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: Ensure clean reuse of wrbJayamohan Kallickal1-6/+17
This patch ensures that wrb is cleanly resued for io path and is memset to zero for non io path Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: correcting the returnJayamohan Kallickal1-1/+1
This patch fixes an issue where return was not called properly. Thanks to Mike Christie for spotting this Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: Proper checking of stateJayamohan Kallickal1-1/+1
This patch adds proper checking of value in for hba state. We would be adding more states later on Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: Fix for first_burstJayamohan Kallickal1-2/+2
This patch fixes the first_burst being modified instead of max_burst Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: changing copyright to 2010Jayamohan Kallickal9-9/+9
This patch replaces 2009 with 2010 in copyright statement Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: Remove Ring mode from driverJayamohan Kallickal1-148/+33
Ring mode is not used. This patch removes the code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] vmw_pvscsi: fix signedness warning with newer compilersDmitry Torokhov1-1/+2
pvscsi_setup_msix() expects 'irq' argument to be an int but is being passed unsigned int. Unsigned int is more proper type for IRQ number so let's use it. This shuts off a compile warning with recent compilers. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Acked-by: Alok Kataria <akataria@vmware.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] sd: Combine DIF/DIX error handlingMartin K. Petersen1-12/+3
DIF and DIX errors are handled identically at this point. Collapse the switch cases into one and let scsi_io_completion print result and sense data. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc: unify two if branches with the same code in ↵Roel Kluin1-6/+1
lpfc_decode_firmware_rev() Regardless of the flag state, the branches execute the same code Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 18:21:54 +0000