summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2007-05-30[SCSI] Merge up to linux-2.6 headJames Bottomley282-1960/+3089
Conflicts: drivers/scsi/jazz_esp.c Same changes made by both SCSI and SPARC trees: problem with UTF-8 conversion in the copyright. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] 3w-xxxx: convert to use the data buffer accessorsFUJITA Tomonori1-81/+23
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] 3w-9xxx: convert to use the data buffer accessorsFUJITA Tomonori1-97/+42
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Adam Radford <linuxraid@amcc.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds5-19/+16
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix some section mismatch warnings [ARM] 4417/1: Serial: Fix AMBA drivers locking [ARM] 4394/1: ARMv7: Add the TLB range operations [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c [ARM] 4416/1: NWFPE: fix undeclared symbols [ARM] 4415/1: AML5900: fix sparse warnings from map_io [ARM] 4414/1: S3C2443: sparse fix for clock.c [ARM] 4412/1: S3C2412: reset errata fix [ARM] 4411/1: KS8695: Another serial driver fix [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init [ARM] Fix stacktrace FP range checking [ARM] use __used attribute [ARM] enable arbitary speed tty ioctls and split input/output speed [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code [ARM] 4404/1: Trivial IXP42x Kconfig cleanup [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ
2007-05-30[ARM] Fix some section mismatch warningsRussell King1-2/+2
The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30ehea: Fixed multi queue RX bugThomas Klein2-2/+2
Must access the respective queue's dummy netdev instead of the port's netdev. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: enable IRQ on duplex renegotiationStephen Hemminger1-1/+1
Don't want IRQ on FIFO error because there is nothing useful to do with it. But do want IRQ on duplex change. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30e1000: restore netif_poll_enable call but make sure IRQs are offHerbert Xu1-1/+8
This restores the previously removed netif_poll_enable call in e1000_open. It's needed on all but the first call to e1000_open for a NIC as e1000_close always calls netif_poll_disable. netif_poll_enable can only be called safely if no polls have been scheduled. This should be the case as long as we don't enter our IRQ handler. In order to guarantee this we explicitly disable IRQs as early as possible when we're probing the NIC. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Kok, Auke" <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30defxx: Fix the handling of ioremap() failuresMaciej W. Rozycki1-0/+1
If ioremap_nocache() is unfortunate enough to fail, the error code is not set correctly leading to a false success from dfx_register(). This change fixes the problem. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: program proper register for fiber PHYStephen Hemminger1-1/+1
Driver was reading value from one register, setting bit and then writing the wrong register. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: checksum offload plus vlan bugStephen Hemminger1-1/+1
Driver was not correctly setting up transmit descriptor when doing VLAN tag insertion with checksum offload. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30sky2: dont set bogus bit in PHY registerStephen Hemminger2-23/+1
This code inherited from the sk98lin driver is incorrect on the Yukon2. The GPHY_CTRL register values are specific to the internal PHY of the chip and the values used were leftovers. Driver was setting bit 13 which is now the INT polarity for the PHY! Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-30Merge branch 'upstream-fixes' of ↵Jeff Garzik2-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-05-30[SCSI] gdth: Fix obvious typo "spin_lock_irqrestore()"Robert P. J. Day1-1/+1
Fix misspelled "spin_lock_irqrestore" to read "spin_unlock_irqrestore" instead. Presumably, GDTH_RTC doesn't get used a lot. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Achim Leubner <achim_leubner@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] gdth: fix ambiguous gdthtable definitionDavid Rientjes1-1/+1
Labeling a variable as __attribute_used__ is ambiguous: it means __attribute__((unused)) for gcc <3.4 and __attribute__((used)) for gcc >=3.4. There is no such thing as labeling a variable as __attribute__((used)). We assume that we're simply suppressing a warning here if gdthtable[] is declared but unreferenced. Acked-by: Achim Leubner <achim_leubner@adaptec.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] nsp32: convert to use the data buffer accessorsFUJITA Tomonori1-61/+24
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: GOTO Masanori <gotom@sanori.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[ARM] 4417/1: Serial: Fix AMBA drivers lockingThomas Gleixner2-2/+4
The -rt patch triggered a lockdep warning in the amba serial drivers, which never shows up on UP kernels. On SMP systems this would trigger as well. Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. This matches the code in the 8250 serial driver. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] 4411/1: KS8695: Another serial driver fixAndrew Victor1-1/+1
Fix a error reported by newer versions of GCC. error: static declaration of 'ks8695_reg' follows non-static declaration Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-29[SCSI] ibmvscsi: Changeable queue depthBrian King2-0/+19
Adds support for a changeable queue depth to ibmvscsi. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29[SCSI] stex: convert to use the data buffer accessorsFUJITA Tomonori1-73/+36
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29random: fix seeding with zero entropyMatt Mackall1-24/+31
Add data from zero-entropy random_writes directly to output pools to avoid accounting difficulties on machines without entropy sources. Tested on lguest with all entropy sources disabled. Signed-off-by: Matt Mackall <mpm@selenic.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-29random: fix error in entropy extractionMatt Mackall1-5/+7
Fix cast error in entropy extraction. Add comments explaining the magic 16. Remove extra confusing loop variable. Signed-off-by: Matt Mackall <mpm@selenic.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-29[SCSI] qla4xxx: convert to use the data buffer accessorsFUJITA Tomonori3-76/+40
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29IB/mlx4: Fix last allocated object tracking in bitmap allocatorRoland Dreier1-1/+1
Set last allocated object to the object after the one just allocated before ORing in the extra top bits. Also handle the case where this wraps around. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29IB/cm: Fix stale connection detectionSean Hefty1-11/+14
The ib_cm can incorrectly detect a stale connection (a new connection request for a QPN that is already connected) as a duplicate connection request. Separate the handling of potential duplicate REQs from stale connections. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29IPoIB/cm: Fix performance regression on MellanoxMichael S. Tsirkin2-40/+37
commit 518b1646 ("IPoIB/cm: Fix SRQ WR leak") introduced a severe performance regression on Mellanox cards, because keeping a QP in the error state for extended periods of time moves hardware to the slow path (until the QP is destroyed). For example, MPI latency goes from ~3 usecs to ~7 usecs. Fix this by posting a send WR on one of the QPs that are being flushed, instead of using a separate drain QP that is kept in the error state. This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=636>, reported and bisected by Scott Weitzenkamp at Cisco and debugged by Sasha Mikheev at Voltaire. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29IB/mthca: Fix handling of send CQE with error for QPs connected to SRQMichael S. Tsirkin1-3/+3
mthca_free_err_wqe() currently treats both send and receive CQEs identically if a QP is using an SRQ. But for Tavor hardware, send CQEs with error can be chained together even if the RQ is part of SRQ, so we may miss some CQEs. Fix by following the WQE chain for all send CQEs even for non-SRQ QPs. This fixes crashes in IPoIB CM: <https://bugs.openfabrics.org//show_bug.cgi?id=604> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29[SCSI] fusion: convert to use the data buffer accessorsFUJITA Tomonori1-59/+19
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. TODO: use scsi_for_each_sg(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29[SCSI] ipr: convert to use the data buffer accessorsFUJITA Tomonori1-104/+40
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29Merge branch 'master' of ↵Linus Torvalds7-283/+195
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fill holes in hypervisor APIs and fix KTSB registry. [SPARC64]: Fix two bugs wrt. kernel 4MB TSB. [SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM. [SPARC]: Emulate cmpxchg like parisc [SPARC64]: Fix _PAGE_EXEC_4U check in sun4u I-TLB miss handler. [SPARC]: Linux always started with 9600 8N1 [SPARC64]: arch/sparc64/time.c doesn't compile on Ultra 1 (no PCI) [SPARC64]: Eliminate NR_CPUS limitations. [SPARC64]: Use machine description and OBP properly for cpu probing. [SPARC64]: Negotiate hypervisor API for PCI services. [SPARC64]: Report proper system soft state to the hypervisor. [SPARC64]: Fix typo in sun4v_hvapi_register error handling. [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp [SCSI] jazz_esp: Converted to use esp_core. [SPARC64]: PCI device scan is way too verbose by default. [SERIAL] sunzilog: section mismatch fix [SPARC32]: Removes mismatch section warnigs in sparc time.c file [SPARC64]: Don't be picky about virtual-dma values on sun4v. [SPARC64]: Kill unused DIE_PAGE_FAULT enum value. [SCSI] pluto: Use wait_for_completion_timeout.
2007-05-29Merge branch 'for-linus' of ↵Linus Torvalds8-43/+94
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fix return code firewire: prefix modules with firewire- instead of fw- firewire: Add missing byteswapping for receive DMA programs. ieee1394: raw1394: Fix async send ieee1394: eth1394: bring back a parent device ieee1394: eth1394: handle tlabel exhaustion ieee1394: eth1394: remove bogus netif_wake_queue ieee1394: sbp2: include workqueue.h
2007-05-29Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds6-11/+46
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon/applesmc: Handle name file creation error and deletion hwmon/applesmc: Simplify dependencies hwmon-vid: Don't spam the logs when VRM version is missing hwmon/w83627hf: Be quiet when no chip is found hwmon/coretemp: Add more safety checks hwmon/ds1621: Fix swapped temperature limits
2007-05-29Merge branch 'for_paulus' of ↵Linus Torvalds2-2/+0
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix Kconfig warning [PPC] Fix modpost warning [POWERPC] Fix modpost warning [POWERPC] Fix Section mismatch warnings [POWERPC] QE: fix Kconfig 'select' warning with UCC_FAST [POWERPC] 52xx: unbreak lite5200 dts (_pic vs. -pic) [PPC] Remove duplicate export of __div64_32. [PPC] Fix COMMON symbol warnings
2007-05-29Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds20-104/+204
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] megaraid_sas: intercept cmd timeout and throttle io [SCSI] fusion: Fix |/|| confusion [SCSI] aic94xx: asd_clear_nexus should fail if the cleared task does not complete [SCSI] aic7xxx: fix aicasm build failure with gcc-3.4.6 [SCSI] aacraid: apply commit config for reset_devices flag [SCSI] sd: fix refcounting regression in suspend/resume routines [SCSI] aacraid: fix panic on short Inquiry [SCSI] aacraid: Correct sa platform support. (Was: [Bug 8469] Bad EIP value on pentium3 SMP kernel-2.6.21.1) [SCSI] NCR53C9x: correct spelling mistake in deprecation notice [SCSI] tgt: fix a rdma indirect transfer error bug [SCSI] MegaRAID: Update MAINTAINERS email-id [SCSI] stex: minor cleanup and version update [SCSI] stex: fix reset recovery for console device [SCSI] stex: extend hard reset wait time [SCSI] stex: fix id mapping issue [SCSI] ipr: Proper return codes for eh_dev_reset for SATA devices [SCSI] zfcp: IO stall after deleting and path checker changes after reenabling zfcp devices [SCSI] zfcp: avoid clutter in erp_dbf
2007-05-29USB: replace flush_workqueue with cancel_sync_workAlan Stern3-12/+26
This patch (as912) replaces a couple of calls to flush_workqueue() with cancel_sync_work() and cancel_rearming_delayed_work(). Using a more directed approach allows us to avoid some nasty deadlocks. The prime example occurs when a first-level device (the parent is a root hub) is removed while at the same time the root hub gets a remote wakeup request. khubd would try to flush the autosuspend workqueue while holding the root-hub's lock, and the remote-wakeup workqueue routine would be waiting to lock the root hub. The patch also reorganizes the power management portion of usb_disconnect(), separating it out into its own routine. The autosuspend workqueue entry is cancelled immediately instead of waiting for the device's release routine. In addition, synchronization with the autosuspend thread is carried out even for root hubs (an oversight in the original code). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Cc: Mark Lord <lkml@rtr.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-29[SCSI] libsas: convert to use the data buffer accessorsFUJITA Tomonori1-5/+5
- convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29[SCSI] cciss: convert to use the data buffer accessorsFUJITA Tomonori1-53/+22
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mike Miller <Mike.Miller@hp.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29[PATCH] hostap: Allocate enough tailroom for TKIPBrandon Craig Rhodes1-5/+8
When hostap_tx_encrypt() tries to allocate enough headroom and tailroom for ieee80211 encryption, it only makes enough room for the "mpdu" phase of the operation, but forgets about the "msdu" phase. (For TKIP, these two phases require, respectively, 4 and 8 bytes of tailroom, per the "ieee80211_crypt_tkip" structure at the bottom of net/ieee80211/ieee80211_crypt_tkip.c.) Signed-off-by: Brandon Craig Rhodes <brandon@rhodesmill.org> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-29[PATCH] prism54: fix monitor mode oopsBjörn Steinbrink1-2/+3
Manually set the device of a skb for prism54 cards that are in monitor mode as we never call eth_type_trans in that case. Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-29[SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM.Martin Habets1-1/+1
The DRM code depends on an atomic version of cmpxchg(), which is not available on sparc32. Since other platforms besides sparc32 have this issue a KCONFIG option is added for it. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SPARC]: Linux always started with 9600 8N1Jan Engelhardt1-3/+3
The Linux kernel ignored the PROM's serial settings (115200,n,8,1 in my case). This was because mode_prop remained "ttyX-mode" (expected: "ttya-mode") due to the constness of string literals when used with "char *". Since there is no "ttyX-mode" property in the PROM, Linux always used the default 9600. [ Investigation of the suncore.s assembler reveals that gcc optimizied away the stores, yet did not emit a warning, which is a pretty anti-social thing to do and is the only reason this bug lived for so long -DaveM ] Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_espDavid S. Miller2-16/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SCSI] jazz_esp: Converted to use esp_core.Thomas Bogendoerfer2-247/+184
Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SERIAL] sunzilog: section mismatch fixKrzysztof Helt1-2/+2
This patch fixes section mismatch warnings in the sunzilog driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SCSI] pluto: Use wait_for_completion_timeout.Christoph Hellwig1-14/+4
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-28[SCSI] sg: remove unnecessary checkEric Sesterhenn1-1/+1
coverity spotted this (cid #758). All callers dereference sfp, so we dont need this check. In addition to this, we dereference it earlier in the function. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-27[SCSI] arcmsr: convert to use the data buffer accessorsFUJITA Tomonori1-72/+31
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-27[SCSI] aic7xxx_old: convert to use the data buffer accessorsFUJITA Tomonori1-41/+14
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-27firewire: fix return codeJeff Garzik1-1/+1
Fix this warning on x86-64 drivers/firewire/fw-cdev.c:798: warning: initialization from incompatible pointer type by making the return code of ioctl_send_request() the same as all the other ioctl_xxx() return codes. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27firewire: prefix modules with firewire- instead of fw-Stefan Richter2-12/+14
Of course everybody immediately associates "fw-" with FireWire, not firmware or firewall or whatever. But "firewire-" has a nice ring to it too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Hoegsberg <krh@bitplanet.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 21:26:55 +0000