summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-11-01Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds8-9/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "The last round of minimalistic fixes for clocksource drivers: - Prevent multiple shutdown of the sh_mtu2 clocksource - Annotate a bunch of clocksource/schedclock functions with notrace to prevent an annoying ftrace recursion issue" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sh_mtu2: Fix multiple shutdown call issue clocksource/drivers/digicolor: Prevent ftrace recursion clocksource/drivers/fsl_ftm_timer: Prevent ftrace recursion clocksource/drivers/vf_pit_timer: Prevent ftrace recursion clocksource/drivers/prima2: Prevent ftrace recursion clocksource/drivers/samsung_pwm_timer: Prevent ftrace recursion clocksource/drivers/pistachio: Prevent ftrace recursion clocksource/drivers/arm_global_timer: Prevent ftrace recursion
2015-11-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "The last two one-liners for 4.3 from the irqchip space: - Regression fix for armada SoC which addresses the fallout from the set_irq_flags() cleanup - Add the missing propagation of the irq_set_type() callback to the parent interrupt controller of the tegra interrupt chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/tegra: Propagate IRQ type setting to parent irqchip/armada-370-xp: Fix regression by clearing IRQ_NOAUTOEN
2015-10-31Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-6/+23
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This should be our final batch of fixes for 4.3: - A patch from Sudeep Holla that fixes annotation of wakeup sources properly, old unused format seems to have spread through copying. - Two patches from Tony for OMAP. One dealing with MUSB setup problems due to runtime PM being enabled too early on the parent device. The other fixes IRQ numbering for OMAP1" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: usb: musb: omap2430: Fix regression caused by driver core change ARM: OMAP1: fix incorrect INT_DMA_LCD ARM: dts: fix gpio-keys wakeup-source property
2015-10-31Merge tag 'scsi-fixes' of ↵Linus Torvalds4-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is three essential bug fixes for various SCSI parts. The only affected users are SCSI multi-path via device handler (basically all the enterprise) and mvsas users. The dh bugs are an async entanglement in boot resulting in a serious WARN_ON trip and a use after free on remove leading to a crash with strict memory accounting. The mvsas bug manifests as a null deref oops but only on abort sequences; however, these can commonly occur with SATA attached devices, hence the fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi_dh: don't try to load a device handler during async probing scsi_dh: fix use-after-free when removing scsi device mvsas: Fix NULL pointer dereference in mvs_slot_task_free
2015-10-31Merge tag 'md/4.3-rc7-fixes' of git://neil.brown.name/mdLinus Torvalds2-4/+5
Pull md bug fixes from Neil Brown: "Two more bug fixes for md. One bugfix for a list corruption in raid5 because of incorrect locking. Other for possible data corruption when a recovering device is failed, removed, and re-added. Both tagged for -stable" * tag 'md/4.3-rc7-fixes' of git://neil.brown.name/md: Revert "md: allow a partially recovered device to be hot-added to an array." md/raid5: fix locking in handle_stripe_clean_event()
2015-10-31Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds4-7/+18
Pull drm fixes from Dave Airlie: "Two drm atomic core fixes. And two radeon patches needed to fix a backlight regression on some older hardware" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Correct arguments to list_tail_add in create blob ioctl drm: crtc: integer overflow in drm_property_create_blob() drm/radeon: fix dpms when driver backlight control is disabled drm/radeon: move bl encoder assignment into bl init
2015-10-31Merge branch 'for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This sets the stable pages flag on the RBD block device when we have CRCs enabled. (This is necessary since the default assumption for block devices changed in 3.9)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: require stable pages if message data CRCs are enabled
2015-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds38-148/+442
Pull networking fixes from David Miller: 1) Fix two regressions in ipv6 route lookups, particularly wrt output interface specifications in the lookup key. From David Ahern. 2) Fix checks in ipv6 IPSEC tunnel pre-encap fragmentation, from Herbert Xu. 3) Fix mis-advertisement of 1000BASE-T on bcm63xx_enet, from Simon Arlott. 4) Some smsc phys misbehave with energy detect mode enabled, so add a DT property and disable it on such switches. From Heiko Schocher. 5) Fix TSO corruption on TX in mv643xx_eth, from Philipp Kirchhofer. 6) Fix regression added by removal of openvswitch vport stats, from James Morse. 7) Vendor Kconfig options should be bool, not tristate, from Andreas Schwab. 8) Use non-_BH() net stats bump in tcp_xmit_probe_skb(), otherwise we barf during TCP REPAIR operations. 9) Fix various bugs in openvswitch conntrack support, from Joe Stringer. 10) Fix NETLINK_LIST_MEMBERSHIPS locking, from David Herrmann. 11) Don't have VSOCK do sock_put() in interrupt context, from Jorgen Hansen. 12) Fix skb_realloc_headroom() failures properly in ISDN, from Karsten Keil. 13) Add some device IDs to qmi_wwan, from Bjorn Mork. 14) Fix ovs egress tunnel information when using lwtunnel devices, from Pravin B Shelar. 15) Add missing NETIF_F_FRAGLIST to macvtab feature list, from Jason Wang. 16) Fix incorrect handling of throw routes when the result of the throw cannot find a match, from Xin Long. 17) Protect ipv6 MTU calculations from wrap-around, from Hannes Frederic Sowa. 18) Fix failed autonegotiation on KSZ9031 micrel PHYs, from Nathan Sullivan. 19) Add missing memory barries in descriptor accesses or xgbe driver, from Thomas Lendacky. 20) Fix release conditon test in pppoe_release(), from Guillaume Nault. 21) Fix gianfar bugs wrt filter configuration, from Claudiu Manoil. 22) Fix violations of RX buffer alignment in sh_eth driver, from Sergei Shtylyov. 23) Fixing missing of_node_put() calls in various places around the networking, from Julia Lawall. 24) Fix incorrect leaf now walking in ipv4 routing tree, from Alexander Duyck. 25) RDS doesn't check pskb_pull()/pskb_trim() return values, from Sowmini Varadhan. 26) Fix VLAN configuration in mlx4 driver, from Jack Morgenstein. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) ipv6: protect mtu calculation of wrap-around and infinite loop by rounding issues Revert "Merge branch 'ipv6-overflow-arith'" net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes net/mlx4_en: Explicitly set no vlan tags in WQE ctrl segment when no vlan is present vhost: fix performance on LE hosts bpf: sample: define aarch64 specific registers amd-xgbe: Fix race between access of desc and desc index RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv forcedeth: fix unilateral interrupt disabling in netpoll path openvswitch: Fix skb leak using IPv6 defrag ipv6: Export nf_ct_frag6_consume_orig() openvswitch: Fix double-free on ip_defrag() errors fib_trie: leaf_walk_rcu should not compute key if key is less than pn->key net: mv643xx_eth: add missing of_node_put ath6kl: add missing of_node_put net: phy: mdio: add missing of_node_put netdev/phy: add missing of_node_put net: netcp: add missing of_node_put net: thunderx: add missing of_node_put ipv6: gre: support SIT encapsulation ...
2015-10-30Merge branch 'for-linus' of ↵Linus Torvalds3-8/+45
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: - a change to the ALPS driver where we had limit the quirk for trackstick handling from being active on all Dells to just a few models - a fix for a build dependency issue in the sur40 driver - a small clock handling fixup in the LPC32xx touchscreen driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits Input: sur40 - add dependency on VIDEO_V4L2 Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock
2015-10-30Merge tag 'pci-v4.3-fixes-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Sorry for this last-minute update; it's been in -next for quite a while, but I forgot about it until I started getting ready for the merge window. It's small and fixes a way a user could cause a panic via sysfs, so I think it's worth getting it in v4.3. NUMA: - Prevent out of bounds access in sysfs numa_node override (Sasha Levin)" * tag 'pci-v4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Prevent out of bounds access in numa_node override
2015-10-31Merge tag 'omap-for-v4.3/fixes-rc7' of ↵Olof Johansson1-6/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two omap regression fixes: - Fix omap3 MUSB with DMA caused by driver core changes - Fix LCD DMA interrupt number for omap1 that did not get changed for sparse IRQ changes * tag 'omap-for-v4.3/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: usb: musb: omap2430: Fix regression caused by driver core change ARM: OMAP1: fix incorrect INT_DMA_LCD Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-31drm: Correct arguments to list_tail_add in create blob ioctlManeet Singh1-1/+1
Arguments passed to list_add_tail were reversed resulting in deletion of old blob property everytime the new one is added. Fixes commit e2f5d2ea479b9b2619965d43db70939589afe43a Author: Daniel Stone <daniels@collabora.com> Date: Fri May 22 13:34:51 2015 +0100 drm/mode: Add user blob-creation ioctl Signed-off-by: Maneet Singh <mmaneetsingh@nvidia.com> [seanpaul tweaked commit subject a little] Signed-off-by: Sean Paul <seanpaul@chromium.org> Cc: stable@kernel.org # v4.2 Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2015-10-31Revert "md: allow a partially recovered device to be hot-added to an array."NeilBrown1-2/+1
This reverts commit 7eb418851f3278de67126ea0c427641ab4792c57. This commit is poorly justified, I can find not discusison in email, and it clearly causes a problem. If a device which is being recovered fails and is subsequently re-added to an array, there could easily have been changes to the array *before* the point where the recovery was up to. So the recovery must start again from the beginning. If a spare is being recovered and fails, then when it is re-added we really should do a bitmap-based recovery up to the recovery-offset, and then a full recovery from there. Before this reversion, we only did the "full recovery from there" which is not corect. After this reversion with will do a full recovery from the start, which is safer but not ideal. It will be left to a future patch to arrange the two different styles of recovery. Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: NeilBrown <neilb@suse.com> Cc: stable@vger.kernel.org (3.14+) Fixes: 7eb418851f32 ("md: allow a partially recovered device to be hot-added to an array.")
2015-10-31drm: crtc: integer overflow in drm_property_create_blob()Dan Carpenter1-1/+1
The size here comes from the user via the ioctl, it is a number between 1-u32max so the addition here could overflow on 32 bit systems. Fixes: f453ba046074 ('DRM: add mode setting support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Cc: stable@kernel.org # v4.2 Signed-off-by: Dave Airlie <airlied@gmail.com>
2015-10-31md/raid5: fix locking in handle_stripe_clean_event()Roman Gushchin1-2/+4
After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done neilb: original was against a 3.x kernel. I forward-ported to 4.3-rc. This verison is suitable for any kernel since Commit: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") (v4.1+). I'll post a version for earlier kernels to stable. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by: NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> Cc: <stable@vger.kernel.org> # 3.13 - 4.2
2015-10-30rbd: require stable pages if message data CRCs are enabledRonny Hegewald1-0/+3
rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a767206fbe5d4c69493b7e6d2a8d08cc0a0 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Cc: stable@vger.kernel.org # 3.9+, needs backporting Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-10-30Merge branch 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie3-5/+16
into drm-fixes regression fix for backlight on old laptops. * 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dpms when driver backlight control is disabled drm/radeon: move bl encoder assignment into bl init
2015-10-29drm/radeon: fix dpms when driver backlight control is disabledAlex Deucher1-4/+14
If driver backlight control is disabled, either by driver parameter or default per-asic setting, revert to the old behavior. Fixes a regression in commit: 4281f46ef839050d2ef60348f661eb463c21cc2e Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-10-29drm/radeon: move bl encoder assignment into bl initAlex Deucher3-1/+2
So that the bl encoder will be null if the GPU does not control the backlight. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-10-28usb: musb: omap2430: Fix regression caused by driver core changeTony Lindgren1-6/+23
Commit ddef08dd00f5 ("Driver core: wakeup the parent device before trying probe") started automatically ensuring the parent device is enabled when the child gets probed. This however caused a regression for MUSB omap2430 interface as the runtime PM for the parent device needs the child initialized to access the MUSB hardware registers. Let's delay the enabling of PM runtime for the parent until the child has been properly initialized as suggested in an earlier patch by Grygorii Strashko <grygorii.strashko@ti.com>. In addition to delaying pm_runtime_enable, we now also need to make sure the parent is enabled during omap2430_musb_init. We also want to propagate an error from omap2430_runtime_resume if struct musb is not initialized. Note that we use pm_runtime_put_noidle here for both the child and parent to prevent an extra runtime_suspend/resume cycle. Let's also add some comments to avoid confusion between the two different devices. Fixes: ddef08dd00f5 ("Driver core: wakeup the parent device before trying probe") Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-28clocksource/drivers/sh_mtu2: Fix multiple shutdown call issueMagnus Damm1-1/+3
On the r7s72100 Genmai board the MTU2 driver currently triggers a common clock framework WARN_ON(enable_count) when disabling the clock due to the MTU2 driver after recent callback rework may call ->set_state_shutdown() multiple times. A similar issue was spotted for the TMU driver and fixed in: 452b132 clocksource/drivers/sh_tmu: Fix traceback spotted in -next On r7s72100 Genmai v4.3-rc7 built with shmobile_defconfig spits out the following during boot: sh_mtu2 fcff0000.timer: ch0: used for clock events ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:675 clk_core_disable+0x2c/0x6c() CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc7 #1 Hardware name: Generic R7S72100 (Flattened Device Tree) Backtrace: [<c00133d4>] (dump_backtrace) from [<c0013570>] (show_stack+0x18/0x1c) [<c0013558>] (show_stack) from [<c01c7aac>] (dump_stack+0x74/0x90) [<c01c7a38>] (dump_stack) from [<c00272fc>] (warn_slowpath_common+0x88/0xb4) [<c0027274>] (warn_slowpath_common) from [<c0027400>] (warn_slowpath_null+0x24/0x2c) [<c00273dc>] (warn_slowpath_null) from [<c03a9320>] (clk_core_disable+0x2c/0x6c) [<c03a92f4>] (clk_core_disable) from [<c03aa0a0>] (clk_disable+0x40/0x4c) [<c03aa060>] (clk_disable) from [<c0395d2c>] (sh_mtu2_disable+0x24/0x50) [<c0395d08>] (sh_mtu2_disable) from [<c0395d6c>] (sh_mtu2_clock_event_shutdown+0x14/0x1c) [<c0395d58>] (sh_mtu2_clock_event_shutdown) from [<c007d7d0>] (clockevents_switch_state+0xc8/0x114) [<c007d708>] (clockevents_switch_state) from [<c007d834>] (clockevents_shutdown+0x18/0x28) [<c007d81c>] (clockevents_shutdown) from [<c007dd58>] (clockevents_exchange_device+0x70/0x78) [<c007dce8>] (clockevents_exchange_device) from [<c007e578>] (tick_check_new_device+0x88/0xe0) [<c007e4f0>] (tick_check_new_device) from [<c007daf0>] (clockevents_register_device+0xac/0x120) [<c007da44>] (clockevents_register_device) from [<c0395be8>] (sh_mtu2_probe+0x230/0x350) [<c03959b8>] (sh_mtu2_probe) from [<c028b6f0>] (platform_drv_probe+0x50/0x98) Reported-by: Chris Brandt <chris.brandt@renesas.com> Fixes: 19a9ffb ("clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface") Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-10-27net/mlx4: Copy/set only sizeof struct mlx4_eqe bytesCarol L Soto2-2/+2
When doing memcpy/memset of EQEs, we should use sizeof struct mlx4_eqe as the base size and not caps.eqe_size which could be bigger. If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt data in the master context. When using a 64 byte stride, the memcpy copied over 63 bytes to the slave_eq structure. This resulted in copying over the entire eqe of interest, including its ownership bit -- and also 31 bytes of garbage into the next WQE in the slave EQ -- which did NOT include the ownership bit (and therefore had no impact). However, once the stride is increased to 128, we are overwriting the ownership bits of *three* eqes in the slave_eq struct. This results in an incorrect ownership bit for those eqes, which causes the eq to seem to be full. The issue therefore surfaced only once 128-byte EQEs started being used in SRIOV and (overarchitectures that have 128/256 byte cache-lines such as PPC) - e.g after commit 77507aa249ae "net/mlx4_core: Enable CQE/EQE stride support". Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net/mlx4_en: Explicitly set no vlan tags in WQE ctrl segment when no vlan is ↵Jack Morgenstein1-0/+2
present We do not set the ins_vlan field to zero when no vlan id is present in the packet. Since WQEs in the TX ring are not zeroed out between uses, this oversight could result in having vlan flags present in the WQE ctrl segment when no vlan is preset. Fixes: e38af4faf01d ('net/mlx4_en: Add support for hardware accelerated 802.1ad vlan') Reported-by: Gideon Naim <gideonn@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27vhost: fix performance on LE hostsMichael S. Tsirkin1-0/+7
commit 2751c9882b947292fcfb084c4f604e01724af804 ("vhost: cross-endian support for legacy devices") introduced a minor regression: even with cross-endian disabled, and even on LE host, vhost_is_little_endian is checking is_le flag so there's always a branch. To fix, simply check virtio_legacy_is_little_endian first. Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27amd-xgbe: Fix race between access of desc and desc indexLendacky, Thomas2-1/+5
During Tx cleanup it's still possible for the descriptor data to be read ahead of the descriptor index. A memory barrier is required between the read of the descriptor index and the start of the Tx cleanup loop. This allows a change to a lighter-weight barrier in the Tx transmit routine just before updating the current descriptor index. Since the memory barrier does result in extra overhead on arm64, keep the previous change to not chase the current descriptor value. This prevents the execution of the barrier for each loop performed. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27forcedeth: fix unilateral interrupt disabling in netpoll pathNeil Horman1-13/+11
Forcedeth currently uses disable_irq_lockdep and enable_irq_lockdep, which in some configurations simply calls local_irq_disable. This causes errant warnings in the netpoll path as in netpoll_send_skb_on_dev, where we disable irqs using local_irq_save, leading to the following warning: WARNING: at net/core/netpoll.c:352 netpoll_send_skb_on_dev+0x243/0x250() (Not tainted) Hardware name: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (nv_start_xmit_optimized+0x0/0x860 [forcedeth]) Modules linked in: netconsole(+) configfs ipv6 iptable_filter ip_tables ppdev parport_pc parport sg microcode serio_raw edac_core edac_mce_amd k8temp snd_hda_codec_realtek snd_hda_codec_generic forcedeth snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i2c_nforce2 i2c_core shpchp ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif pata_amd ata_generic pata_acpi sata_nv dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 1940, comm: modprobe Not tainted 2.6.32-573.7.1.el6.x86_64.debug #1 Call Trace: [<ffffffff8107bbc1>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff8107bcc6>] ? warn_slowpath_fmt+0x46/0x60 [<ffffffffa00fe5b0>] ? nv_start_xmit_optimized+0x0/0x860 [forcedeth] [<ffffffff814b3593>] ? netpoll_send_skb_on_dev+0x243/0x250 [<ffffffff814b37c9>] ? netpoll_send_udp+0x229/0x270 [<ffffffffa02e3299>] ? write_msg+0x39/0x110 [netconsole] [<ffffffffa02e331b>] ? write_msg+0xbb/0x110 [netconsole] [<ffffffff8107bd55>] ? __call_console_drivers+0x75/0x90 [<ffffffff8107bdba>] ? _call_console_drivers+0x4a/0x80 [<ffffffff8107c445>] ? release_console_sem+0xe5/0x250 [<ffffffff8107d200>] ? register_console+0x190/0x3e0 [<ffffffffa02e71a6>] ? init_netconsole+0x1a6/0x216 [netconsole] [<ffffffffa02e7000>] ? init_netconsole+0x0/0x216 [netconsole] [<ffffffff810020d0>] ? do_one_initcall+0xc0/0x280 [<ffffffff810d4933>] ? sys_init_module+0xe3/0x260 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b ---[ end trace f349c7af88e6a6d5 ]--- console [netcon0] enabled netconsole: network logging started Fix it by modifying the forcedeth code to use disable_irq_nosync_lockdep_irqsavedisable_irq_nosync_lockdep_irqsave instead, which saves and restores irq state properly. This also saves us a little code in the process Tested by the reporter, with successful restuls Patch applies to the head of the net tree Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by: Vasily Averin <vvs@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds1-1/+2
Pull ARM fixes from Russell King: "Two fixes for ARM and one for clkdev: - Fix another build issue with vdsomunge on non-glibc systems - Fix a randconfig build error caused by an invalid configuration - Fix a clkdev problem causing the Nokia n700 to no longer boot" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: clkdev: fix clk_add_alias() with a NULL alias device name ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h ARM: make RiscPC depend on MMU
2015-10-27scsi_dh: don't try to load a device handler during async probingChristoph Hellwig1-1/+1
Request_module gets really unhappy when called from async probing, so revert to not auto load device handler modules during the SCSI bus scan. While autoloading would be really useful we never did this until 4.3-rc and it turns out that functionality doesn't actually work. Fixes: 566079 ("dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpath") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Paul Mackerras <paulus@ozlabs.org> Tested-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-26net: mv643xx_eth: add missing of_node_putJulia Lawall1-1/+3
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26ath6kl: add missing of_node_putJulia Lawall1-0/+1
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e; local idexpression n; @@ for_each_compatible_node(n,...) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: phy: mdio: add missing of_node_putJulia Lawall1-0/+2
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26netdev/phy: add missing of_node_putJulia Lawall1-0/+1
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_available_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: netcp: add missing of_node_putJulia Lawall1-2/+6
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: thunderx: add missing of_node_putJulia Lawall1-1/+3
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27scsi_dh: fix use-after-free when removing scsi deviceJunichi Nomura3-1/+9
The commit 1bab0de0274f ("dm-mpath, scsi_dh: don't let dm detach device handlers") removed reference counting of attached scsi device handler. As a result, handler data is freed immediately via scsi_dh->detach() in the context of scsi_remove_device() where activation request can be still in flight. This patch moves scsi_dh_handler_detach() to sdev releasing function, scsi_device_dev_release_usercontext(), at that point the device is already in quiesced state. Fixes: 1bab0de0274f ("dm-mpath, scsi_dh: don't let dm detach device handlers") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27mvsas: Fix NULL pointer dereference in mvs_slot_task_freeDāvis Mosāns1-0/+2
When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays NULL but it's later used in mvs_abort_task as slot which is passed to mvs_slot_task_free causing NULL pointer dereference. Just return from mvs_slot_task_free when passed with NULL slot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891 Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-26sh_eth: fix RX buffer size calculationSergei Shtylyov1-2/+2
The RX buffer size calulation failed to account for the length granularity (which is now 32 bytes)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26sh_eth: fix RX buffer size alignmentSergei Shtylyov1-5/+5
Both Renesas R-Car and RZ/A1 manuals state that RX buffer length must be a multiple of 32 bytes, while the driver only uses 16 byte granularity... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27clocksource/drivers/digicolor: Prevent ftrace recursionJisheng Zhang1-1/+1
Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. We should not trace digicolor_timer_sched_read() function. Fix this by adding the notrace attribute to this function. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-27clocksource/drivers/fsl_ftm_timer: Prevent ftrace recursionJisheng Zhang1-1/+1
Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. We should not trace the ftm_read_sched_clock() function. Fix this by adding the notrace attribute to this function. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-27clocksource/drivers/vf_pit_timer: Prevent ftrace recursionJisheng Zhang1-1/+1
Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. We should not trace the pit_read_sched_clock() function. Fix this by adding a notrace attribute to this function. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-27clocksource/drivers/prima2: Prevent ftrace recursionJisheng Zhang1-1/+1
Currently prima2 timer can be used as a scheduler clock. We properly marked sirfsoc_read_sched_clock() as notrace but we then call another function sirfsoc_timer_read() that _wasn't_ notrace. Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. Fix this by adding notrace attribute to the sirfsoc_timer_read() function. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-27clocksource/drivers/samsung_pwm_timer: Prevent ftrace recursionJisheng Zhang1-1/+1
Currently samsung_pwm_timer can be used as a scheduler clock. We properly marked samsung_read_sched_clock() as notrace but we then call another function samsung_clocksource_read() that _wasn't_ notrace. Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. Fix this by adding notrace attribute to the samsung_clocksource_read() function. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-27clocksource/drivers/pistachio: Prevent ftrace recursionJisheng Zhang1-1/+2
Currently pistachio can be used as a scheduler clock. We properly marked pistachio_read_sched_clock() as notrace but we then call another function pistachio_clocksource_read_cycles() that _wasn't_ notrace. Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. Fix this by adding notrace attribute to the pistachio_clocksource_read_cycles() function. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-27clocksource/drivers/arm_global_timer: Prevent ftrace recursionJisheng Zhang1-2/+7
Currently arm_global_timer can be used as a scheduler clock. We properly marked gt_sched_clock_read() as notrace but we then call another function gt_counter_read() that _wasn't_ notrace. Having a traceable function in the sched_clock() path leads to a recursion within ftrace and a kernel crash. Fix this by adding an extra notrace function to keep other users of gt_counter_read() traceable. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-26Input: alps - only the Dell Latitude D420/430/620/630 have separate stick ↵Hans de Goede1-6/+42
button bits commit 92bac83dd79e ("Input: alps - non interleaved V2 dualpoint has separate stick button bits") assumes that all alps v2 non-interleaved dual point setups have the separate stick button bits. Later we limited this to Dell laptops only because of reports that this broke things on non Dell laptops. Now it turns out that this breaks things on the Dell Latitude D600 too. So it seems that only the Dell Latitude D420/430/620/630, which all share the same touchpad / stick combo, have these separate bits. This patch limits the checking of the separate bits to only these models fixing regressions with other models. Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-27Merge tag 'iommu-fixes-v4.3-rc7' of ↵Linus Torvalds3-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two late fixes for the AMD IOMMU driver: - add an additional check to the io page-fault handler to avoid a BUG_ON being hit in handle_mm_fault() - fix a problem with devices writing to the system management area and were blocked by the IOMMU because the driver wrongly cleared out the DTE flags allowing that access" * tag 'iommu-fixes-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Don't clear DTE flags when modifying it iommu/amd: Fix BUG when faulting a PROT_NONE VMA
2015-10-27Merge tag 'md/4.3-rc6-fixes' of git://neil.brown.name/mdLinus Torvalds2-11/+41
Pull md fixes from Neil Brown: "Some raid1/raid10 fixes. I meant to get this to you before -rc7, but what with all the travel plans.. Two fixes for bugs that are in both raid1 and raid10. Both related to bad-block-lists and at least one needs to be back ported to 3.1. Also a revision for the "new" layout in raid10. This "new" code (which aims to improve robustness) actually reduces robustness in some cases. It probably isn't in use at all as not public user-space code makes use of these new layouts. However just in case someone has their own code, it would be good to get the WARNing out for them sooner" * tag 'md/4.3-rc6-fixes' of git://neil.brown.name/md: md/raid10: fix the 'new' raid10 layout to work correctly. md/raid10: don't clear bitmap bit when bad-block-list write fails. md/raid1: don't clear bitmap bit when bad-block-list write fails. md/raid10: submit_bio_wait() returns 0 on success md/raid1: submit_bio_wait() returns 0 on success
2015-10-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-32/+48
Pull drm fixes from Dave Airlie: "Last fixes from me: one amdgpu/radeon suspend resume and one leak fix, along with one vmware fix for some issues when command submission fails" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: don't try to recreate sysfs entries on resume drm/radeon: don't try to recreate sysfs entries on resume drm/amdgpu: stop leaking page flip fence drm/vmwgfx: Stabilize the command buffer submission code
2015-10-26Merge branch 'i2c/for-current' of ↵Linus Torvalds2-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: pnx: fix runtime warnings caused by enabling unprepared clock i2c: mv64xxx: really allow I2C offloading
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 22:29:09 +0000