summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-01-09mfd: Put WM8994 into cache only mode when suspendingMark Brown1-0/+2
This is required by the ASoC driver for very low power modes where the device is fully idle but we want to update controls. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14mfd: Test for jack detection when deciding if wm8994 should suspendMark Brown1-0/+14
The jack detection on WM1811 is often required during system suspend, add it as another check when deciding if we should suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13Merge branch 'topic/cache' of ↵Mark Brown3-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into for-3.3
2011-12-13regmap: Move initialization of regcache related fields to regcache_initLars-Peter Clausen3-9/+10
Move the initialization regcache related fields of the regmap struct to regcache_init. This allows us to keep regmap and regcache code better separated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13Merge branch 'mfd/wm8994' of ↵Mark Brown277-2284/+4271
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3
2011-12-13mfd: Convert wm8994 to use generic regmap irq_chipMark Brown2-163/+34
Factor out the irq_chip implementation, substantially reducing the code size for the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13Merge branch 'topic/irq' of ↵Mark Brown3-0/+306
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into wm8994-mfd
2011-12-13mfd: Mark WM1811 GPIO6 register volatile for later revisionsMark Brown2-7/+24
For later chip revisions the WM1811 GPIO6 register is always volatile so store the device revision when initialising the driver and then check at runtime if we're running on a newer device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Add WM1811A device ID to wm8994 driverMark Brown1-0/+1
The WM1811A is a variant of the WM1811 with pin configuration changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Correct revision display for WM1811 revision DMark Brown1-0/+5
As WM1811 revision C was transparent to software the revision IDs for subsequent revisions are one less than they would normally be. Correct for this in log messages. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Initialise WM8994 register cache after reading chip ID registersMark Brown3-17/+30
The different devices handled by the WM8994 can be distinguished using their ID registers so we don't need to rely on the user having registered the device correctly. Instead do the initial regmap setup with a minimal configuration only supporting physical I/O and then configure the cache once we have identified the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Enable register cache for wm8994 devicesMark Brown1-52/+30
As part of this we provide information about the registers that exist in the device to the regmap core, drop the small amount of cache that the core had been using and let regmap do the sync. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13Merge branch 'topic/cache' of ↵Mark Brown4-2/+57
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into HEAD
2011-12-13mfd: Add wm8994 register access and default informationMark Brown3-1/+1243
Describe the register map to the regmap core so that we can use its diagnostic features and cache support. This is split out from the patch using it due to the size so that the actual code change is a bit clearer. As the various devices are supersets of each other the access maps are built up by layering the functions on top of each other, though the interface for specifying the register defaults isn't currently amenable to this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Don't hard code the reset value for WM8994 devicesMark Brown1-1/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Disable more pulls on WM8994Mark Brown1-3/+8
Disable more pulls by default on WM8994 for a small current saving. Since some designs do leave SPKMODE floating provide platform data to allow that to be left enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Convert wm8994 to devm_kzalloc()Mark Brown1-11/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Add basic device tree binding for wm8994Mark Brown1-0/+9
Add a placeholder device tree binding for the wm8994 driver. At present the binding is essentially null as none of the platform data is supported, and at least some of that will depend on the pending regulator bindings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13mfd: Remove some unused functions in wm8894-irqMark Brown1-10/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Oritz <sameo@linux.intel.com>
2011-12-05regmap: Add irq_base accessor to regmap_irqMark Brown1-0/+13
Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-05regmap: Allow drivers to reinitialise the register cache at runtimeMark Brown1-0/+33
Sometimes the register map information may change in ways that drivers can discover at runtime. For example, new revisions of a device may add new registers. Support runtime discovery by drivers by allowing the register cache to be reinitialised with a new function regmap_reinit_cache() which discards the existing cache and creates a new one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29ASoC: Move SigmaDSP firmware loader to ASoCLars-Peter Clausen3-166/+0
It has been pointed out previously, that the firmware subsystem is not the right place for the SigmaDSP firmware loader. Furthermore the SigmaDSP is currently only used in audio products and we are aiming for better integration into the ASoC framework in the future, with support for ALSA controls for firmware parameters and support dynamic power management as well. So the natural choice for the SigmaDSP firmware loader is the ASoC subsystem. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29Merge branch 'for-3.2' into for-3.3Mark Brown1-23/+58
2011-11-29firmware: Sigma: Fix endianess issuesLars-Peter Clausen1-1/+1
Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-29firmware: Sigma: Skip header during CRC generationLars-Peter Clausen1-1/+2
The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-29firmware: Sigma: Prevent out of bounds memory accessLars-Peter Clausen1-21/+55
The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-28regmap: Report if we actually handled an interrupt in regmap-irqMark Brown1-1/+6
While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23Merge git://github.com/rustyrussell/linuxLinus Torvalds3-2/+20
* git://github.com/rustyrussell/linux: virtio-pci: make reset operation safer virtio-mmio: Correct the name of the guest features selector virtio: add HAS_IOMEM dependency to MMIO platform bus driver
2011-11-24virtio-pci: make reset operation saferMichael S. Tsirkin1-0/+18
virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio-mmio: Correct the name of the guest features selectorSasha Levin1-1/+1
Guest features selector spelling mistake. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio: add HAS_IOMEM dependency to MMIO platform bus driverHeiko Carstens1-1/+1
Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-23Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds2-1/+5
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: libata: fix build without BMDMA [libata] ahci_platform: fix DT probing
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds6-21/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs PCI: pciehp: wait 100 ms after Link Training check PCI: pciehp: wait 1000 ms before Link Training check PCI: pciehp: Retrieve link speed after link is trained PCI: Let PCI_PRI depend on PCI PCI: Fix compile errors with PCI_ATS and !PCI_IOV PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
2011-11-23Merge branch 'i2c-for-linus' of ↵Linus Torvalds3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Make i2cdev_notifier_call static i2c: Delete ANY_I2C_BUS i2c: Fix device name for 10-bit slave address i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: TPS65910: Fix VDD1/2 voltage selector count
2011-11-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds20-432/+594
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm: integer overflow in drm_mode_dirtyfb_ioctl() drivers/gpu/vga/vgaarb.c: add missing kfree drm/radeon/kms/atom: unify i2c gpio table handling drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real ttm: Don't return the bo reserved on error path drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. ...
2011-11-23regulator: TPS65910: Fix VDD1/2 voltage selector countAfzal Mohammed1-6/+8
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23i2c: Make i2cdev_notifier_call staticShubhrajyoti D1-1/+1
The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23i2c: Fix device name for 10-bit slave addressJean Delvare1-1/+3
10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-11-23i2c-algo-bit: Generate correct i2c address sequence for 10-bit targetJeffrey (Sheng-Hui) Chu1-2/+2
The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23drm: integer overflow in drm_mode_dirtyfb_ioctl()Xi Wang1-0/+4
There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22Revert "of/irq: of_irq_find_parent: check for parent equal to child"Linus Torvalds1-7/+7
This reverts commit dc9372808412edbc653a675a526c2ee6c0c14a91. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org> Cc: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mount_subtree() pointless use-after-free iio: fix a leak due to improper use of anon_inode_getfd() microblaze: bury asm/namei.h
2011-11-22drivers/gpu/vga/vgaarb.c: add missing kfreeJulia Lawall1-6/+12
kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22drm/radeon/kms/atom: unify i2c gpio table handlingAlex Deucher1-128/+86
Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22drm/radeon/kms: fix up gpio i2c mask bits for r4xx for realAlex Deucher1-0/+12
Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22ttm: Don't return the bo reserved on error pathThomas Hellstrom1-1/+7
An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux ↵Dave Airlie10-211/+354
into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits) drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. drm/i915: enable cacheable objects on Ivybridge drm/i915: add constants to size fence arrays and fields drm/i915: Ivybridge still has fences! drm/i915: forcewake warning fixes in debugfs drm/i915: Fix object refcount leak on mmappable size limit error path. drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work ...
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds3-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ams_delta_serio - include linux/module.h Input: elantech - adjust hw_version detection logic Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
2011-11-22Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds5-366/+3
* git://www.linux-watchdog.org/linux-watchdog: watchdog: fix initialisation printout in s3c2410_wdt watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() watchdog: adx_wdt.c: remove driver
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 22:55:10 +0000