summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-06-24Merge branch 'common/fbdev-meram' of ↵Paul Mundt1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x into fbdev-fixes-for-linus
2011-06-24hecubafb: add module_put on error path in hecubafb_probe()Pavel Shved1-1/+2
In hecubafb_probe(), after a successful try_module_get, vzalloc may fail and make the hecubafb_probe return, but the module is not put on this error path. This patch adds an exit point that calls module_put in such situation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved <shved@ispras.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24sm501fb: fix section mismatch warningRandy Dunlap1-1/+1
Fix section mismatch warning in sm501fb: WARNING: drivers/video/sm501fb.o(.text+0x21d6): Section mismatch in reference from the function sm501fb_init_fb() to the variable .devinit.data:sm501_default_mode The function sm501fb_init_fb() references the variable __devinitdata sm501_default_mode. This is often because sm501fb_init_fb lacks a __devinitdata annotation or the annotation of sm501_default_mode is wrong. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24gx1fb: Fix section mismatch warningsRandy Dunlap1-7/+7
Fix a chain of section mismatches in geode driver, beginning with: WARNING: drivers/video/geode/gx1fb.o(.data+0x70): Section mismatch in reference from the variable gx1fb_driver to the function .init.text:gx1fb_probe() The variable gx1fb_driver references the function __init gx1fb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Making the changes that Paul pointed out resulted in a few more changes being needed, so they are all included here. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma planeDamian Hobson-Garcia1-1/+1
The check was intended to test if we have a valid pointer to write into, but it mistakenly checks the pointer contents instead. Since a valid pointer is mandatory for the chroma data if a YCbCr format is used, the pointer check has been removed. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-22Merge branch 'pm-fixes' of ↵Linus Torvalds4-13/+29
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PCI / PM: Block races between runtime PM and system sleep PM / Domains: Update documentation PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset PM: Fix async resume following suspend failure PM: Free memory bitmaps if opening /dev/snapshot fails PM: Rename dev_pm_info.in_suspend to is_prepared PM: Update documentation regarding sysdevs PM / Runtime: Update doc: usage count no longer incremented across system PM
2011-06-21PCI / PM: Block races between runtime PM and system sleepRafael J. Wysocki1-1/+3
After commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow pm_runtime_suspend() to succeed during system suspend) it is possible that a device resumed by the pm_runtime_resume(dev) in pci_pm_prepare() will be suspended immediately from a work item, timer function or otherwise, defeating the very purpose of calling pm_runtime_resume(dev) from there. To prevent that from happening it is necessary to increment the runtime PM usage counter of the device by replacing pm_runtime_resume() with pm_runtime_get_sync(). Moreover, the incremented runtime PM usage counter has to be decremented by the corresponding pci_pm_complete(), via pm_runtime_put_sync(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-06-21PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unsetRafael J. Wysocki1-2/+2
Commit 85eb8c8d0b0900c073b0e6f89979ac9c439ade1a (PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)) converted the shmobile platform to using generic code for runtime PM clock management, but it changed the behavior for CONFIG_PM_RUNTIME unset incorrectly. Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify() should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER (instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE, respectively). Make this function behave as appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-06-21PM: Fix async resume following suspend failureAlan Stern1-2/+12
The PM core doesn't handle suspend failures correctly when it comes to asynchronously suspended devices. These devices are moved onto the dpm_suspended_list as soon as the corresponding async thread is started up, and they remain on the list even if they fail to suspend or the sleep transition is cancelled before they get suspended. As a result, when the PM core unwinds the transition, it tries to resume the devices even though they were never suspended. This patch (as1474) fixes the problem by adding a new "is_suspended" flag to dev_pm_info. Devices are resumed only if the flag is set. [rjw: * Moved the dev->power.is_suspended check into device_resume(), because we need to complete dev->power.completion and clear dev->power.is_prepared too for devices whose dev->power.is_suspended flags are unset. * Fixed __device_suspend() to avoid setting dev->power.is_suspended if async_error is different from zero.] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
2011-06-21PM: Rename dev_pm_info.in_suspend to is_preparedAlan Stern2-8/+12
This patch (as1473) renames the "in_suspend" field in struct dev_pm_info to "is_prepared", in preparation for an upcoming change. The new name is more descriptive of what the field really means. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
2011-06-21Merge branch 'for-linus' of ↵Linus Torvalds6-22/+66
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Ensure that LOS and DFE are being turned off RDMA/cxgb4: Couple of abort fixes RDMA/cxgb4: Don't truncate MR lengths RDMA/cxgb4: Don't exceed hw IQ depth limit for user CQs
2011-06-20Merge branch 'drm-fixes' of ↵Linus Torvalds10-61/+84
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms/r6xx+: voltage fixes drm/nouveau: drop leftover debugging drm/radeon: avoid warnings from r600/eg irq handlers on powered off card. drm/radeon/kms: add missing param for dce3.2 DP transmitter setup drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync drm/nv50/disp: fix gamma with page flipping overlay turned on drm/nouveau/pm: Prevent overflow in nouveau_perf_init() drm/nouveau: fix big-endian switch
2011-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds22-38/+490
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) pxa168_eth: fix race in transmit path. ipv4, ping: Remove duplicate icmp.h include netxen: fix race in skb->len access sgi-xp: fix a use after free hp100: fix an skb->len race netpoll: copy dev name of slaves to struct netpoll ipv4: fix multicast losses r8169: fix static initializers. inet_diag: fix inet_diag_bc_audit() gigaset: call module_put before restart of if_open() farsync: add module_put to error path in fst_open() net: rfs: enable RFS before first data packet is received fs_enet: fix freescale FCC ethernet dp buffer alignment netdev: bfin_mac: fix memory leak when freeing dma descriptors vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support caif: Bugfix - XOFF removed channel from caif-mux tun: teach the tun/tap driver to support netpoll dp83640: drop PHY status frames in the driver. dp83640: fix phy status frame event parsing phylib: Allow BCM63XX PHY to be selected only on BCM63XX. ...
2011-06-21drm/radeon/kms/r6xx+: voltage fixesAlex Deucher4-0/+16
0xff01 is not an actual voltage value, but a flag for the driver. If the power state as that value, skip setting the voltage. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20pxa168_eth: fix race in transmit path.Richard Cochran1-1/+1
Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Cc: stable@kernel.org Cc: Sachin Sanap <ssanap@marvell.com> Cc: Zhangfei Gao <zgao6@marvell.com> Cc: Philip Rakity <prakity@marvell.com> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20netxen: fix race in skb->len accessEric Dumazet1-2/+2
As soon as skb is given to hardware, TX completion can free skb under us. Therefore, we should update dev stats before kicking the device. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20Merge branch 'stable/bug.fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/setup: Fix for incorrect xen_extra_mem_start. xen: When calling power_off, don't call the halt function. xen: Fix compile warning when CONFIG_SMP is not defined. xen: support CONFIG_MAXSMP xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped"
2011-06-20Merge branch 'for-linus' of ↵Linus Torvalds5-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sh_keysc - 8x8 MODE_6 fix Input: omap-keypad - add missing input_sync() Input: evdev - try to wake up readers only if we have full packet Input: properly assign return value of clamp() macro.
2011-06-20drm/nouveau: drop leftover debuggingDave Airlie1-1/+0
this printk isn't really useful, just drop it for now. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie4-39/+46
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync drm/nv50/disp: fix gamma with page flipping overlay turned on drm/nouveau/pm: Prevent overflow in nouveau_perf_init() drm/nouveau: fix big-endian switch
2011-06-20drm/radeon: avoid warnings from r600/eg irq handlers on powered off card.Dave Airlie2-18/+14
Since we were calling the wptr function before checking if the IH was even enabled, or the GPU wasn't shutdown, we'd get spam in the logs when the GPU readback 0xffffffff. This reorders things so we return early in the no IH and GPU shutdown cases. Reported-and-tested-by: ManDay on #radeon Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20drm/radeon/kms: add missing param for dce3.2 DP transmitter setupAlex Deucher1-2/+3
This is used during phy init to set up the phy for DP. This may fix DP problems on DCE3.2 cards. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20drm/radeon/kms/atom: fix duallink on some early DCE3.2 cardsAlex Deucher1-1/+5
Certain revisions of the vbios on DCE3.2 cards have a bug in the transmitter control table which prevents duallink from being enabled properly on some cards. The action switch statement jumps to the wrong offset for the OUTPUT_ENABLE action. The fix is to use the ENABLE action rather than the OUTPUT_ENABLE action on the affected cards. In fixed version of the vbios, both actions jump to the same offset, so the change should be safe. Reported-and-tested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-19sgi-xp: fix a use after freeEric Dumazet1-3/+3
Its illegal to dereference skb after dev_kfree_skb(skb) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Robin Holt <holt@sgi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-19hp100: fix an skb->len raceEric Dumazet1-2/+2
As soon as skb is given to hardware and spinlock released, TX completion can free skb under us. Therefore, we should update netdev stats before spinlock release. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-19Merge branch 'davem.r8169' of ↵David S. Miller1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-06-19netpoll: copy dev name of slaves to struct netpollWANG Cong1-0/+1
Otherwise we will not see the name of the slave dev in error message: [ 388.469446] (null): doesn't support polling, aborting. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-18Merge branch 'hwmon-for-linus' of ↵Linus Torvalds5-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (s3c) Initialize sysfs attributes hwmon: (ibmpex) Initialize sysfs attributes hwmon: (ibmaem) Initialize sysfs attributes hwmon: (asus_atk0110) Consolidate sysfs attribute initialization hwmon: (coretemp) Drop unused struct members
2011-06-18Input: sh_keysc - 8x8 MODE_6 fixMagnus Damm1-1/+1
According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18Input: omap-keypad - add missing input_sync()Janusz Krzysztofik1-0/+1
Otherwise the updated evdev driver (commit cdda911c34006f1089f3c87b1a1f, "Input: evdev - only signal polls on full packets") no longer works on top of omap-keypad. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-18Input: evdev - try to wake up readers only if we have full packetDmitry Torokhov1-1/+2
We should only wake waiters on the event device when we actually post an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting threads runnable only to go right back to sleep because the device still isn't readable. Reported-by: Jeffrey Brown <jeffbrown@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-17hwmon: (s3c) Initialize sysfs attributesGuenter Roeck1-0/+2
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (ibmpex) Initialize sysfs attributesGuenter Roeck1-0/+1
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (ibmaem) Initialize sysfs attributesGuenter Roeck1-0/+2
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (asus_atk0110) Consolidate sysfs attribute initializationGuenter Roeck1-4/+1
Call sysfs_attr_init() from atk_init_attribute() to handle sysfs attribute initialization in a single function. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-06-17hwmon: (coretemp) Drop unused struct membersJean Delvare1-4/+0
pdev_entry.cpu and pdev_entry.cpu_core_id aren't used anywhere in the driver code so we can drop these struct members. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-18drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan syncBen Skeggs1-34/+25
The DDX modifies DMA_SEMAPHORE on nv50 in order to implement sync-to-vblank, things will go very wrong for cross-channel sync after this. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18drm/nv50/disp: fix gamma with page flipping overlay turned onBen Skeggs1-3/+14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18drm/nouveau/pm: Prevent overflow in nouveau_perf_init()Emil Velikov1-0/+5
While parsing the perf table, there is no check if the num of entries read from the vbios is less than the currently allocated number. In case of a buggy vbios this will cause overwriting of kernel memory, causing aditional problems. Add a simple check in order to prevent the case Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-18drm/nouveau: fix big-endian switchBen Skeggs1-2/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-17Merge branch 'drm-fixes' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Fix gen6 (SNB) missed BLT ring interrupts.
2011-06-17Merge branch 'fixes' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Don't try to transition if the pstate is incorrect [CPUFREQ] powernow-k8: Don't notify of successful transition if we failed (vid case). [CPUFREQ] Don't set stat->last_index to -1 if the pol->cur has incorrect value.
2011-06-18drm/i915: Fix gen6 (SNB) missed BLT ring interrupts.Daniel J Blueman1-0/+10
The failure appeared in dmesg as: [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 35064155, at 35064155], missed IRQ? This works around that problem on by making the blitter command streamer write interrupt state to the Hardware Status Page when a MI_USER_INTERRUPT command is decoded, which appears to force the seqno out to memory before the interrupt happens. v1->v2: Moved to prior interrupt handler installation and RMW flags as per feedback. v2->v3: Removed RMW of flags (by anholt) Cc: stable@kernel.org Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [v1] Tested-by: Eric Anholt <eric@anholt.net> [v1,v3] (incidence of the bug with a testcase went from avg 2/1000 to 0/12651 in the latest test run (plus more for v1)) Tested-by: Kenneth Graunke <kenneth@whitecape.org> [v1] Tested-by: Robert Hooker <robert.hooker@canonical.com> [v1] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33394 Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17r8169: fix static initializers.Francois Romieu1-4/+6
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-06-17gigaset: call module_put before restart of if_open()Pavel Shved1-1/+3
if_open() calls try_module_get(), and after an attempt to lock a mutex the if_open() function may return -ERESTARTSYS without putting the module. Then, when if_open() is executed again, try_module_get() is called making the reference counter of THIS_MODULE greater than one at successful exit from if_open(). The if_close() function puts the module only once, and as a result it can't be unloaded. This patch adds module_put call before the return from if_open(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved <shved@ispras.ru> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-17farsync: add module_put to error path in fst_open()Pavel Shved1-1/+3
The fst_open() function, after a successful try_module_get() may return an error code if hdlc_open() returns it. However, it does not put the module on this error path. This patch adds the necessary module_put() call. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved <shved@ispras.ru> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-17fs_enet: fix freescale FCC ethernet dp buffer alignmentClive Stubbings1-1/+1
The RIPTR and TIPTR (receive/transmit internal temporary data pointer), used by microcode as a temporary buffer for data, must be 32-byte aligned according to the RM for MPC8247. Tested on mgcoge. Signed-off-by: Clive Stubbings <clive.stubbings@xentech.co.uk> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> cc: Vitaly Bordug <vbordug@ru.mvista.com> cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-17Merge branches 'cxgb4' and 'qib' into for-nextRoland Dreier2-8/+23
2011-06-17IB/qib: Ensure that LOS and DFE are being turned offMitko Haralanov2-8/+23
Due to timing, it is possible for the LOS and DFE to remain on. This is due to the link progressing to LinkUP prior to the driver getting the first Status Changed interrupt. By expanding the conditions under which LOS is turned off and DFE timeout is being set, timing is no longer an issue. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-06-17RDMA/cxgb4: Couple of abort fixesSteve Wise2-13/+38
- fix a race where the driver could end up sending a close_con_req after an abort_rpl. In c4iw_ep_disconnect(), send abort or close request with the ep mutex held. - fix a hang where driver fails to wake up when a connection is reset during a normal close. Wake up any waiters in the interrupt path, and correctly cleanup after rdma_fini() failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 22:46:24 +0000