summaryrefslogtreecommitdiffstats
path: root/drivers/xen/events
AgeCommit message (Collapse)AuthorFilesLines
2017-05-02xen: Revert commits da72ff5bfcb0 and 72a9b186292dBoris Ostrovsky1-8/+17
Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741) established that commit 72a9b186292d ("xen: Remove event channel notification through Xen PCI platform device") (and thus commit da72ff5bfcb0 ("partially revert "xen: Remove event channel notification through Xen PCI platform device"")) are unnecessary and, in fact, prevent HVM guests from booting on Xen releases prior to 4.0 Therefore we revert both of those commits. The summary of that discussion is below: Here is the brief summary of the current situation: Before the offending commit (72a9b186292): 1) INTx does not work because of the reset_watches path. 2) The reset_watches path is only taken if you have Xen > 4.0 3) The Linux Kernel by default will use vector inject if the hypervisor support. So even INTx does not work no body running the kernel with Xen > 4.0 would notice. Unless he explicitly disabled this feature either in the kernel or in Xen (and this can only be disabled by modifying the code, not user-supported way to do it). After the offending commit (+ partial revert): 1) INTx is no longer support for HVM (only for PV guests). 2) Any HVM guest The kernel will not boot on Xen < 4.0 which does not have vector injection support. Since the only other mode supported is INTx which. So based on this summary, I think before commit (72a9b186292) we were in much better position from a user point of view. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/x86: Remove PVH supportBoris Ostrovsky1-1/+0
We are replacing existing PVH guests with new implementation. We are keeping xen_pvh_domain() macro (for now set to zero) because when we introduce new PVH implementation later in this series we will reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that code is conditioned by 'if (xen_pvh_domain())'. (We will also need a noop xen_pvh_domain() for !CONFIG_XEN_PVH). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-01-05Merge tag 'for-linus-4.10-rc2-tag' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - small fixes for xenbus driver - one fix for xen dom0 boot on huge system - small cleanups * tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen: ARM: Zero reserved fields of xatp before making hypervisor call xen: events: Replace BUG() with BUG_ON() xen: remove stale xs_input_avail() from header xen: return xenstore command failures via response instead of rc xen: xenbus driver must not accept invalid transaction ids xen/evtchn: use rb_entry() xen/setup: Don't relocate p2m over existing one
2017-01-03xen: events: Replace BUG() with BUG_ON()Shyam Saini1-2/+1
Replace BUG() with BUG_ON() using coccinelle Signed-off-by: Shyam Saini <mayhs11saini@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner1-1/+1
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-13Merge tag 'for-linus-4.10-rc0-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for 4.10 These are some fixes, a move of some arm related headers to share them between arm and arm64 and a series introducing a helper to make code more readable. The most notable change is David stepping down as maintainer of the Xen hypervisor interface. This results in me sending you the pull requests for Xen related code from now on" * tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen/balloon: Only mark a page as managed when it is released xenbus: fix deadlock on writes to /proc/xen/xenbus xen/scsifront: don't request a slot on the ring until request is ready xen/x86: Increase xen_e820_map to E820_X_MAX possible entries x86: Make E820_X_MAX unconditionally larger than E820MAX xen/pci: Bubble up error and fix description. xen: xenbus: set error code on failure xen: set error code on failures arm/xen: Use alloc_percpu rather than __alloc_percpu arm/arm64: xen: Move shared architecture headers to include/xen/arm xen/events: use xen_vcpu_id mapping for EVTCHNOP_status xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing xen-scsifront: Add a missing call to kfree MAINTAINERS: update XEN HYPERVISOR INTERFACE xenfs: Use proc_create_mount_point() to create /proc/xen xen-platform: use builtin_pci_driver xen-netback: fix error handling output xen: make use of xenbus_read_unsigned() in xenbus xen: make use of xenbus_read_unsigned() in xen-pciback xen: make use of xenbus_read_unsigned() in xen-fbfront ...
2016-12-09x86: Remove empty idle.h headerThomas Gleixner1-1/+0
One include less is always a good thing(tm). Good riddance. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20161209182912.2726-6-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-30xen/events: use xen_vcpu_id mapping for EVTCHNOP_statusVitaly Kuznetsov1-1/+1
EVTCHNOP_status hypercall returns Xen's idea of vcpu id so we need to compare it against xen_vcpu_id mapping, not the Linux cpu id. Suggested-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-11-18x86/idle: Remove enter_idle(), exit_idle()Len Brown1-1/+0
Upon removal of the is_idle flag, these routines became NOPs. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/822f2c22cc5890f7b8ea0eeec60277eb44505b4e.1479449716.git.len.brown@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-30xen: Remove event channel notification through Xen PCI platform deviceKarimAllah Ahmed1-17/+9
Ever since commit 254d1a3f02eb ("xen/pv-on-hvm kexec: shutdown watches from old kernel") using the INTx interrupt from Xen PCI platform device for event channel notification would just lockup the guest during bootup. postcore_initcall now calls xs_reset_watches which will eventually try to read a value from XenStore and will get stuck on read_reply at XenBus forever since the platform driver is not probed yet and its INTx interrupt handler is not registered yet. That means that the guest can not be notified at this moment of any pending event channels and none of the per-event handlers will ever be invoked (including the XenStore one) and the reply will never be picked up by the kernel. The exact stack where things get stuck during xenbus_init: -xenbus_init -xs_init -xs_reset_watches -xenbus_scanf -xenbus_read -xs_single -xs_single -xs_talkv Vector callbacks have always been the favourite event notification mechanism since their introduction in commit 38e20b07efd5 ("x86/xen: event channels delivery on HVM.") and the vector callback feature has always been advertised for quite some time by Xen that's why INTx was broken for several years now without impacting anyone. Luckily this also means that event channel notification through INTx is basically dead-code which can be safely removed without impacting anybody since it has been effectively disabled for more than 4 years with nobody complaining about it (at least as far as I'm aware of). This commit removes event channel notification through Xen PCI platform device. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Julien Grall <julien.grall@citrix.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-09-30xen/events: Convert to hotplug state machineSebastian Andrzej Siewior1-22/+12
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen/events: fifo: use xen_vcpu_id mappingVitaly Kuznetsov1-1/+1
EVTCHNOP_init_control has vCPU id as a parameter and Xen's idea of vCPU id should be used. Use the newly introduced xen_vcpu_id mapping to convert it from Linux's id. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen/events: use xen_vcpu_id mapping in events_baseVitaly Kuznetsov1-5/+5
EVTCHNOP_bind_ipi and EVTCHNOP_bind_virq pass vCPU id as a parameter and Xen's idea of vCPU id should be used. Use the newly introduced xen_vcpu_id mapping to convert it from Linux's id. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_opVitaly Kuznetsov1-1/+2
HYPERVISOR_vcpu_op() passes Linux's idea of vCPU id as a parameter while Xen's idea is expected. In some cases these ideas diverge so we need to do remapping. Convert all callers of HYPERVISOR_vcpu_op() to use xen_vcpu_nr(). Leave xen_fill_possible_map() and xen_filter_cpu_maps() intact as they're only being called by PV guests before perpu areas are initialized. While the issue could be solved by switching to early_percpu for xen_vcpu_id I think it's not worth it: PV guests will probably never get to the point where their idea of vCPU id diverges from Xen's. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-05-24xen/events: Don't move disabled irqsRoss Lagerwall1-2/+4
Commit ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded irq_move_irq() but left out checking if the IRQ is disabled. This broke resuming from suspend since it tries to move a (disabled) irq without holding the IRQ's desc->lock. Fix it by adding in a check for disabled IRQs. The resulting stacktrace was: kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31! invalid opcode: 0000 [#1] SMP Modules linked in: xenfs xen_privcmd ... CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016 task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000 RIP: 0010:[<ffffffff810e26e2>] [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0 RSP: 0018:ffff88003d7bfc50 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8 RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000 R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0 R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66 Call Trace: [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160 [<ffffffff810a3830>] ? sort_range+0x30/0x30 [<ffffffff810a0588>] kthread+0xd8/0xf0 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-04-04xen/events: Mask a moving irqBoris Ostrovsky1-4/+24
Moving an unmasked irq may result in irq handler being invoked on both source and target CPUs. With 2-level this can happen as follows: On source CPU: evtchn_2l_handle_events() -> generic_handle_irq() -> handle_edge_irq() -> eoi_pirq(): irq_move_irq(data); /***** WE ARE HERE *****/ if (VALID_EVTCHN(evtchn)) clear_evtchn(evtchn); If at this moment target processor is handling an unrelated event in evtchn_2l_handle_events()'s loop it may pick up our event since target's cpu_evtchn_mask claims that this event belongs to it *and* the event is unmasked and still pending. At the same time, source CPU will continue executing its own handle_edge_irq(). With FIFO interrupt the scenario is similar: irq_move_irq() may result in a EVTCHNOP_unmask hypercall which, in turn, may make the event pending on the target CPU. We can avoid this situation by moving and clearing the event while keeping event masked. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-22Merge tag 'for-linus-4.6-rc0-tag' of ↵Linus Torvalds3-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.6: - Make earlyprintk=xen work for HVM guests - Remove module support for things never built as modules" * tag 'for-linus-4.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: make platform-pci.c explicitly non-modular drivers/xen: make sys-hypervisor.c explicitly non-modular drivers/xen: make xenbus_dev_[front/back]end explicitly non-modular drivers/xen: make [xen-]ballon explicitly non-modular xen: audit usages of module.h ; remove unnecessary instances xen/x86: Drop mode-selecting ifdefs in startup_xen() xen/x86: Zero out .bss for PV guests hvc_xen: make early_printk work with HVM guests hvc_xen: fix xenboot for DomUs hvc_xen: add earlycon support
2016-03-21xen: audit usages of module.h ; remove unnecessary instancesPaul Gortmaker3-3/+1
Code that uses no modular facilities whatsoever should not be sourcing module.h at all, since that header drags in a bunch of other headers with it. Similarly, code that is not explicitly using modular facilities like module_init() but only is declaring module_param setup variables should be using moduleparam.h and not the larger module.h file for that. In making this change, we also uncover an implicit use of BUG() in inline fcns within arch/arm/include/asm/xen/hypercall.h so we explicitly source <linux/bug.h> for that file now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-15tags: Fix DEFINE_PER_CPU expansionsPeter Zijlstra1-2/+3
$ make tags GEN tags ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1" ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1" ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1" ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1" ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1" ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1" ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1" ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1" ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1" Which are all the result of the DEFINE_PER_CPU pattern: scripts/tags.sh:200: '/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/' scripts/tags.sh:201: '/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/' The below cures them. All except the workqueue one are within reasonable distance of the 80 char limit. TJ do you have any preference on how to fix the wq one, or shall we just not care its too long? Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-12xen/events: use virt_xxx barriersMichael S. Tsirkin1-1/+2
drivers/xen/events/events_fifo.c uses rmb() to communicate with the other side. For guests compiled with CONFIG_SMP, smp_rmb would be sufficient, so rmb() here is only needed if a non-SMP guest runs on an SMP host. Switch to the virt_rmb barrier which serves this exact purpose. Pull in asm/barrier.h here to make sure the file is self-contained. Suggested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-12-02xen/events/fifo: Consume unprocessed events when a CPU diesRoss Lagerwall1-5/+18
When a CPU is offlined, there may be unprocessed events on a port for that CPU. If the port is subsequently reused on a different CPU, it could be in an unexpected state with the link bit set, resulting in interrupts being missed. Fix this by consuming any unprocessed events for a particular CPU when that CPU dies. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-26xen/events: Always allocate legacy interrupts on PV guestsBoris Ostrovsky1-2/+3
After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/events: fifo: Make it running on 64KB granularityJulien Grall2-2/+2
Only use the first 4KB of the page to store the events channel info. It means that we will waste 60KB every time we allocate page for: * control block: a page is allocating per CPU * event array: a page is allocating everytime we need to expand it I think we can reduce the memory waste for the 2 areas by: * control block: sharing between multiple vCPUs. Although it will require some bookkeeping in order to not free the page when the CPU goes offline and the other CPUs sharing the page still there * event array: always extend the array event by 64K (i.e 16 4K chunk). That would require more care when we fail to expand the event channel. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-10Merge tag 'for-linus-4.3-rc0b-tag' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
2015-09-08Merge tag 'for-linus-4.3-rc0-tag' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and fixes for 4.3: - Convert xen-blkfront to the multiqueue API - [arm] Support binding event channels to different VCPUs. - [x86] Support > 512 GiB in a PV guests (off by default as such a guest cannot be migrated with the current toolstack). - [x86] PMU support for PV dom0 (limited support for using perf with Xen and other guests)" * tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (33 commits) xen: switch extra memory accounting to use pfns xen: limit memory to architectural maximum xen: avoid another early crash of memory limited dom0 xen: avoid early crash of memory limited dom0 arm/xen: Remove helpers which are PV specific xen/x86: Don't try to set PCE bit in CR4 xen/PMU: PMU emulation code xen/PMU: Intercept PMU-related MSR and APIC accesses xen/PMU: Describe vendor-specific PMU registers xen/PMU: Initialization code for Xen PMU xen/PMU: Sysfs interface for setting Xen PMU mode xen: xensyms support xen: remove no longer needed p2m.h xen: allow more than 512 GB of RAM for 64 bit pv-domains xen: move p2m list if conflicting with e820 map xen: add explicit memblock_reserve() calls for special pages mm: provide early_memremap_ro to establish read-only mapping xen: check for initrd conflicting with e820 map xen: check pre-allocated page tables for conflict with memory map xen: check for kernel memory conflicting with memory layout ...
2015-09-08xen: Use correctly the Xen memory terminologiesJulien Grall2-3/+3
Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/events: Support event channel rebind on ARMJulien Grall1-5/+1
Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-11Revert "xen/events/fifo: Handle linked events when closing a port"David Vrabel3-53/+9
This reverts commit fcdf31a7c162de0c93a2bee51df4688ab0a348f8. This was causing a WARNING whenever a PIRQ was closed since shutdown_pirq() is called with irqs disabled. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-08-04xen/events/fifo: Handle linked events when closing a portRoss Lagerwall3-9/+53
An event channel bound to a CPU that was offlined may still be linked on that CPU's queue. If this event channel is closed and reused, subsequent events will be lost because the event channel is never unlinked and thus cannot be linked onto the correct queue. When a channel is closed and the event is still linked into a queue, ensure that it is unlinked before completing. If the CPU to which the event channel bound is online, spin until the event is handled by that CPU. If that CPU is offline, it can't handle the event, so clear the event queue during the close, dropping the events. This fixes the missing interrupts (and subsequent disk stalls etc.) when offlining a CPU. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-07-13x86/irq: Use access helper irq_data_get_affinity_mask()Jiang Liu1-2/+2
This is a preparatory patch for moving irq_data struct members. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-17xen: Include xen/page.h rather than asm/xen/page.hJulien Grall2-2/+2
Using xen/page.h will be necessary later for using common xen page helpers. As xen/page.h already include asm/xen/page.h, always use the later. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: netdev@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-19xen/events: don't bind non-percpu VIRQs with percpu chipDavid Vrabel1-4/+8
A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-05-05xen/events: Set irq_info->evtchn before binding the channel to CPU in ↵Boris Ostrovsky1-1/+1
__startup_pirq() .. because bind_evtchn_to_cpu(evtchn, cpu) will map evtchn to 'info' and pass 'info' down to xen_evtchn_port_bind_to_cpu(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Annie Li <annie.li@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-05xen/events: Clear cpu_evtchn_mask before resumingBoris Ostrovsky2-2/+13
When a guest is resumed, the hypervisor may change event channel assignments. If this happens and the guest uses 2-level events it is possible for the interrupt to be claimed by wrong VCPU since cpu_evtchn_mask bits may be stale. This can happen even though evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that is passed in is not necessarily the original one (from pre-migration times) but instead is freshly allocated during resume and so any information about which CPU the channel was bound to is lost. Thus we should clear the mask during resume. We also need to make sure that bits for xenstore and console channels are set when these two subsystems are resumed. While rebind_evtchn_irq() (which is invoked for both of them on a resume) calls irq_set_affinity(), the latter will in fact postpone setting affinity until handling the interrupt. But because cpu_evtchn_mask will have bits for these two cleared we won't be able to take the interrupt. With that in mind, we need to bind those two channels explicitly in rebind_evtchn_irq(). We will keep irq_set_affinity() so that we have a pass through generic irq affinity code later, in case something needs to be updated there as well. (Also replace cpumask_of(0) with cpumask_of(info->cpu) in rebind_evtchn_irq(): it should be set to zero in preceding xen_irq_info_evtchn_setup().) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Annie Li <annie.li@oracle.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-06xen/events: avoid NULL pointer dereference in dom0 on large machinesJuergen Gross1-6/+12
Using the pvops kernel a NULL pointer dereference was detected on a large machine (144 processors) when booting as dom0 in evtchn_fifo_unmask() during assignment of a pirq. The event channel in question was the first to need a new entry in event_array[] in events_fifo.c. Unfortunately xen_irq_info_pirq_setup() is called with evtchn being 0 for a new pirq and the real event channel number is assigned to the pirq only during __startup_pirq(). It is mandatory to call xen_evtchn_port_setup() after assigning the event channel number to the pirq to make sure all memory needed for the event channel is allocated. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-09-23xen/events: support threaded irqs for interdomain event channelsJuergen Gross1-2/+3
Export bind_interdomain_evtchn_to_irq() so drivers can use threaded interrupt handlers with: irq = bind_interdomain_evtchn_to_irq(remote_dom, remote_port); if (irq < 0) /* error */ ret = request_threaded_irq(...); Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-08-01xen/events: drop negativity check of unsigned parameterAndrey Utkin1-1/+1
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80531 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-07-31xen/events/fifo: remove a unecessary use of BM()Frediano Ziglio1-1/+1
Since 05a812ac474d0d6aef6d54b66bb08b81abde79c6 (xen/events/fifo: correctly align bitops), ready is an unsigned long instead of uint32_t and the BM() macro is no longer required. Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-07-31xen/events/fifo: ensure all bitops are properly aligned even on x86David Vrabel1-3/+2
When using the FIFO-based ABI on x86_64, if the last port is at the end of an event array page then sync_test_bit() on this port's event word will read beyond the end of the page and in certain circumstances this may fault. The fault requires the following page in the kernel's direct mapping to be not present, which would mean: a) the array page is the last page of RAM; or b) the following page is ballooned out /and/ it has been used for a foreign mapping by a kernel driver (such as netback or blkback) /and/ the grant has been unmapped. Use the infrastructure added for arm64 to ensure that all bitops operating on event words are unsigned long aligned. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org
2014-07-31xen/events/fifo: reset control block and local HEADs on resumeDavid Vrabel1-20/+28
When using the FIFO-based event channel ABI, if the control block or the local HEADs are not reset after resuming the guest may see stale HEAD values and will fail to traverse the FIFO correctly. This may prevent one or more VCPUs from receiving any events following a resume. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org
2014-06-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-16/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core irq updates from Thomas Gleixner: "The irq department delivers: - Another tree wide update to get rid of the horrible create_irq interface along with its even more horrible variants. That also gets rid of the last leftovers of the initial sparse irq hackery. arch/driver specific changes have been either acked or ignored. - A fix for the spurious interrupt detection logic with threaded interrupts. - A new ARM SoC interrupt controller - The usual pile of fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller genirq: Improve documentation to match current implementation ARM: iop13xx: fix msi support with sparse IRQ genirq: Provide !SMP stub for irq_set_affinity_notifier() irqchip: armada-370-xp: Move the devicetree binding documentation irqchip: gic: Use mask field in GICC_IAR genirq: Remove dynamic_irq mess ia64: Use irq_init_desc genirq: Replace dynamic_irq_init/cleanup genirq: Remove irq_reserve_irq[s] genirq: Replace reserve_irqs in core code s390: Avoid call to irq_reserve_irqs() s390: Remove pointless arch_show_interrupts() s390: pci: Check return value of alloc_irq_desc() proper sh: intc: Remove pointless irq_reserve_irqs() invocation x86, irq: Remove pointless irq_reserve_irqs() call genirq: Make create/destroy_irq() ia64 private tile: Use SPARSE_IRQ tile: pci: Use irq_alloc/free_hwirq() ...
2014-05-16x86: Get rid of get_nr_irqs_gsi()Thomas Gleixner1-16/+1
No need to expose this outside of the ioapic code. The dynamic allocations are guaranteed not to happen in the gsi space. See commit 62a08ae2a. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20140507154335.959870037@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-28xen/events/fifo: correctly align bitopsVladimir Murzin1-11/+30
FIFO event channels require bitops on 32-bit aligned values (the event words). Linux's bitops require unsigned long alignment which may be 64-bits. On arm64 an incorrectly unaligned access will fault. Fix this by aligning the bitops along with an adjustment for bit position and using an unsigned long for the local copy of the ready word. Cc: stable@vger.kernel.org Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Tested-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-07Xen: do hv callback accounting only on x86Arnd Bergmann1-1/+1
Patch 99c8b79d3c1 "xen: Add proper irq accounting for HYPERCALL vector" added a call to inc_irq_stat(irq_hv_callback_count) in common Xen code, however both the inc_irq_stat function and the irq_hv_callback_count counter are architecture specific. This makes the code build again on ARM by moving the call into the existing #ifdef CONFIG_X86. We may want to later do the same implementation on ARM that x86 has though. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org>
2014-04-07Merge commit '683b6c6f82a60fabf47012581c2cfbf1b037ab95' into ↵David Vrabel3-37/+11
stable/for-linus-3.15 This merge of the irq-core-for-linus branch broke the ARM build when Xen is enabled. Conflicts: drivers/xen/events/events_base.c
2014-03-18xen: add support for MSI message groupsRoger Pau Monne2-15/+33
Add support for MSI message groups for Xen Dom0 using the MAP_PIRQ_TYPE_MULTI_MSI pirq map type. In order to keep track of which pirq is the first one in the group all pirqs in the MSI group except for the first one have the newly introduced PIRQ_MSI_GROUP flag set. This prevents calling PHYSDEVOP_unmap_pirq on them, since the unmap must be done with the first pirq in the group. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-03-12xen: Validate online cpus in set_affinityThomas Gleixner1-1/+1
The user space interface does not filter out offline cpus. It merily verifies that the mask contains at least one online cpu. So the selector in the irq chip implementation needs to make sure to pick only an online cpu because otherwise: Offline Core 1 Set affinity to 0xe Selector will pick first set bit, i.e. core 1 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140304203100.978031089@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Add proper irq accounting for HYPERCALL vectorThomas Gleixner1-0/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140223212738.808648133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Get rid of the last irq_desc abuseThomas Gleixner1-14/+1
Warn if any PIRQ cannot be bound to an event channel. Remove the check for irq_desc->action. This hypercall never fails in practice so we can emit a warning unconditionally. Remove a check for a valid irq desc. The only caller of xen_destroy_irq() will only do so if the irq was previously fully setup, which means the descriptor has been allocated as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Cc: David Vrabel <david.vrabel@citrix.com> Link: http://lkml.kernel.org/r/20140223212738.579581220@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Use the proper irq functionsThomas Gleixner3-22/+8
generic_handler_irq() already tests for !desc so use this instead of generic_handle_irq_desc(). Use irq_get_irq_data() instead of desc->irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140223212738.222412125@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>