summaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-01-21Merge tag 'usb-6.2-rc5' of ↵Linus Torvalds26-49/+292
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of small USB and Thunderbolt driver fixes and new device id changes for 6.2-rc5. Included in here are: - thunderbolt bugfixes for reported problems - new usb-serial driver ids added - onboard_hub usb driver fixes for much-reported problems - xhci bugfixes - typec bugfixes - ehci-fsl driver module alias fix - iowarrior header size fix - usb gadget driver fixes All of these, except for the iowarrior fix, have been in linux-next with no reported issues. The iowarrior fix passed the 0-day testing and is a one digit change based on a reported problem in the driver (which was written to a spec, not the real device that is now available)" * tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 usb: host: ehci-fsl: Fix module alias usb: dwc3: fix extcon dependency usb: core: hub: disable autosuspend for TI TUSB8041 USB: fix misleading usb_set_intfdata() kernel doc usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() USB: gadget: Add ID numbers to configfs-gadget driver names usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail usb: gadget: g_webcam: Send color matching descriptor per frame usb: typec: altmodes/displayport: Use proper macro for pin assignment check usb: typec: altmodes/displayport: Fix pin assignment calculation usb: typec: altmodes/displayport: Add pin assignment helper usb: gadget: f_fs: Ensure ep0req is dequeued before free_request usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait usb: misc: onboard_hub: Move 'attach' work to the driver usb: misc: onboard_hub: Invert driver registration order usb: ucsi: Ensure connector delayed work items are flushed usb: musb: fix error return code in omap2430_probe() usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch) xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables ...
2023-01-20USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100Greg Kroah-Hartman1-1/+1
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should be 12, not 13. Cc: stable <stable@kernel.org> Fixes: 17a82716587e ("USB: iowarrior: fix up report size handling for some devices") Reported-by: Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20usb: host: ehci-fsl: Fix module aliasAlexander Stein1-1/+1
Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19Merge tag 'usb-serial-6.2-rc5' of ↵Greg Kroah-Hartman2-0/+18
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.2-rc5 Here are some new device ids, mostly for Quectel modems. All have been in linux-next with no reported issues." * tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel EM05CN modem USB: serial: option: add Quectel EM05CN (SG) modem USB: serial: cp210x: add SCALANCE LPE-9000 device id USB: serial: option: add Quectel EC200U modem USB: serial: option: add Quectel EM05-G (RS) modem USB: serial: option: add Quectel EM05-G (GR) modem USB: serial: option: add Quectel EM05-G (CS) modem
2023-01-19usb: dwc3: fix extcon dependencyArnd Bergmann1-1/+1
The dwc3 core support now links against the extcon subsystem, so it cannot be built-in when extcon is a loadable module: arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon': core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle' arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev' arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node' There was already a Kconfig dependency in the dual-role support, but this is now needed for the entire dwc3 driver. It is still possible to build dwc3 without extcon, but this prevents it from being set to built-in when extcon is a loadable module. Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230118090147.2126563-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: core: hub: disable autosuspend for TI TUSB8041Flavio Suligoi1-0/+13
The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()Maciej Żenczykowski1-1/+3
In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Carlos Llamas <cmllamas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17USB: gadget: Add ID numbers to configfs-gadget driver namesChanh Nguyen1-2/+10
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out: Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16 This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct. Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") Cc: stable <stable@kernel.org> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Frank Li <frank.li@nxp.com> Link: https://lore.kernel.org/r/20230111065105.29205-1-chanh@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: tcpm: Fix altmode re-registration causes sysfs create failChiYuan Huang1-4/+3
There's the altmode re-registeration issue after data role swap (DR_SWAP). Comparing to USBPD 2.0, in USBPD 3.0, it loose the limit that only DFP can initiate the VDM command to get partner identity information. For a USBPD 3.0 UFP device, it may already get the identity information from its port partner before DR_SWAP. If DR_SWAP send or receive at the mean time, 'send_discover' flag will be raised again. It causes discover identify action restart while entering ready state. And after all discover actions are done, the 'tcpm_register_altmodes' will be called. If old altmode is not unregistered, this sysfs create fail can be found. In 'DR_SWAP_CHANGE_DR' state case, only DFP will unregister altmodes. For UFP, the original altmodes keep registered. This patch fix the logic that after DR_SWAP, 'tcpm_unregister_altmodes' must be called whatever the current data role is. Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com> Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Reported-by: TommyYl Chen <tommyyl.chen@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1673248790-15794-1-git-send-email-cy_huang@richtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: g_webcam: Send color matching descriptor per frameDaniel Scally1-0/+3
Currently the color matching descriptor is only sent across the wire a single time, following the descriptors for each format and frame. According to the UVC 1.5 Specification 3.9.2.6 ("Color Matching Descriptors"): "Only one instance is allowed for a given format and if present, the Color Matching descriptor shall be placed following the Video and Still Image Frame descriptors for that format". Add another reference to the color matching descriptor after the yuyv frames so that it's correctly transmitted for that format too. Fixes: a9914127e834 ("USB gadget: Webcam device") Cc: stable <stable@kernel.org> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221216160528.479094-1-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: altmodes/displayport: Use proper macro for pin assignment checkPrashant Malani1-1/+1
While looking at the DP configuration VDO to determine the peripheral configuration, the spec (Table 8-5: DisplayPort Configurations, VESA DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP Source/Sink Device". So, use the correct macro while performing this check. Effectively it's the same as the existing code, but the proposed macro describes the state a little better. No functional changes introduced. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: altmodes/displayport: Fix pin assignment calculationPrashant Malani1-2/+2
Commit c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") fixed the pin assignment calculation to take into account whether the peripheral was a plug or a receptacle. But the "pin_assignments" sysfs logic was not updated. Address this by using the macros introduced in the aforementioned commit in the sysfs logic too. Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: altmodes/displayport: Add pin assignment helperPrashant Malani1-8/+14
The code to extract a peripheral's currently supported Pin Assignments is repeated in a couple of locations. Factor it out into a separate function. This will also make it easier to add fixes (we only need to update 1 location instead of 2). Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: f_fs: Ensure ep0req is dequeued before free_requestUdipto Goswami1-0/+2
As per the documentation, function usb_ep_free_request guarantees the request will not be queued or no longer be re-queued (or otherwise used). However, with the current implementation it doesn't make sure that the request in ep0 isn't reused. Fix this by dequeuing the ep0req on functionfs_unbind before freeing the request to align with the definition. Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/20221215052906.8993-3-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: f_fs: Prevent race during ffs_ep0_queue_waitUdipto Goswami1-0/+5
While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex). Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/20221215052906.8993-2-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: misc: onboard_hub: Move 'attach' work to the driverMatthias Kaehlcke1-6/+6
Currently each onboard_hub platform device owns an 'attach' work, which is scheduled when the device probes. With this deadlocks have been reported on a Raspberry Pi 3 B+ [1], which has nested onboard hubs. The flow of the deadlock is something like this (with the onboard_hub driver built as a module) [2]: - USB root hub is instantiated - core hub driver calls onboard_hub_create_pdevs(), which creates the 'raw' platform device for the 1st level hub - 1st level hub is probed by the core hub driver - core hub driver calls onboard_hub_create_pdevs(), which creates the 'raw' platform device for the 2nd level hub - onboard_hub platform driver is registered - platform device for 1st level hub is probed - schedules 'attach' work - platform device for 2nd level hub is probed - schedules 'attach' work - onboard_hub USB driver is registered - device (and parent) lock of hub is held while the device is re-probed with the onboard_hub driver - 'attach' work (running in another thread) calls driver_attach(), which blocks on one of the hub device locks - onboard_hub_destroy_pdevs() is called by the core hub driver when one of the hubs is detached - destroying the pdevs invokes onboard_hub_remove(), which waits for the 'attach' work to complete - waits forever, since the 'attach' work can't acquire the device lock Use a single work struct for the driver instead of having a work struct per onboard hub platform driver instance. With that it isn't necessary to cancel the work in onboard_hub_remove(), which fixes the deadlock. The work is only cancelled when the driver is unloaded. [1] https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/ [2] https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/ Cc: stable@vger.kernel.org Fixes: 8bc063641ceb ("usb: misc: Add onboard_usb_hub driver") Link: https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/ Link: https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/ Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230110172954.v2.2.I16b51f32db0c32f8a8532900bfe1c70c8572881a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: misc: onboard_hub: Invert driver registration orderMatthias Kaehlcke1-3/+3
The onboard_hub 'driver' consists of two drivers, a platform driver and a USB driver. Currently when the onboard hub driver is initialized it first registers the platform driver, then the USB driver. This results in a race condition when the 'attach' work is executed, which is scheduled when the platform device is probed. The purpose of fhe 'attach' work is to bind elegible USB hub devices to the onboard_hub USB driver. This fails if the work runs before the USB driver has been registered. Register the USB driver first, then the platform driver. This increases the chances that the onboard_hub USB devices are probed before their corresponding platform device, which the USB driver tries to locate in _probe(). The driver already handles this situation and defers probing if the onboard hub platform device doesn't exist yet. Cc: stable@vger.kernel.org Fixes: 8bc063641ceb ("usb: misc: Add onboard_usb_hub driver") Link: https://lore.kernel.org/lkml/Y6W00vQm3jfLflUJ@hovoldconsulting.com/T/#m0d64295f017942fd988f7c53425db302d61952b4 Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20230110172954.v2.1.I75494ebee7027a50235ce4b1e930fa73a578fbe2@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: ucsi: Ensure connector delayed work items are flushedJack Pham2-3/+22
During ucsi_unregister() when destroying a connector's workqueue, there may still be pending delayed work items that haven't been scheduled yet. Because queue_delayed_work() uses a separate timer to schedule a work item, the destroy_workqueue() call is not aware of any pending items. Hence when a pending item's timer expires it would then try to queue on a dangling workqueue pointer. Fix this by keeping track of all work items in a list, so that prior to destroying the workqueue any pending items can be flushed. Do this by calling mod_delayed_work() as that will cause pending items to get queued immediately, which then allows the ensuing destroy_workqueue() to implicitly drain all currently queued items to completion and free themselves. Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Jack Pham <quic_jackp@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: musb: fix error return code in omap2430_probe()Yang Yingliang1-1/+3
Before calling platform_get_resource() in omap2430_probe(), the 'ret' is re-assgined to 0, it can't return an error code, if platform_get_resource fails. Set the error code to -EINVAL to fix this. Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources") Cc: stable <stable@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221230081730.1655616-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)Xu Yang1-2/+2
After successfully probed, ci->role_switch would only be NULL or a valid pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap it with IS_ERR, otherwise the logic is wrong. Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tablesMathias Nyman1-0/+34
USB3 ports on xHC hosts may have retimers that cause too long exit latency to work with native USB3 U1/U2 link power management states. For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm should be disabled while setting up the USB3 roothub. Other ways to identify lpm incapable ports can be added here later if ACPI _DSM does not exist. Limit this to Intel hosts for now, this is to my knowledge only an Intel issue. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: acpi: add helper to check port lpm capability using acpi _DSMMathias Nyman1-0/+65
Add a helper to evaluate ACPI usb device specific method (_DSM) provided in case the USB3 port shouldn't enter U1 and U2 link states. This _DSM was added as port specific retimer configuration may lead to exit latencies growing beyond U1/U2 exit limits, and OS needs a way to find which ports can't support U1/U2 link power management states. This _DSM is also used by windows: Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm- Some patch issues found in testing resolved by Ron Lee Cc: stable@vger.kernel.org Tested-by: Ron Lee <ron.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add a flag to disable USB3 lpm on a xhci root port level.Mathias Nyman2-0/+9
One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add update_hub_device override for PCI xHCI hostsMathias Nyman3-1/+17
Allow PCI hosts to check and tune roothub and port settings before the hub is up and running. This override is needed to turn off U1 and U2 LPM for some ports based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio values for Intel xHC hosts. Usb core calls the host update_hub_device once it creates a hub. Entering U1 or U2 link power save state on ports with this limitation will cause link to fail, turning the usb device unusable in that setup. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Fix null pointer dereference when host diesMathias Nyman1-0/+5
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: xhci: Check endpoint is valid before dereferencing itJimmy Hu1-1/+4
When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Hu <hhhuuu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci-pci: set the dma max_seg_sizeRicardo Ribalda1-0/+2
Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210Juhyung Park2-7/+13
The commit e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") blacklists UAS for all of RTL9210 enclosures. The RTL9210 controller was advertised with UAS since its release back in 2019 and was shipped with a lot of enclosure products with different firmware combinations. Blacklist UAS only for HIKSEMI MD202. This should hopefully be replaced with more robust method than just comparing strings. But with limited information [1] provided thus far (dmesg when the device is plugged in, which includes manufacturer and product, but no lsusb -v to compare against), this is the best we can do for now. [1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com Fixes: e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hongling Zeng <zenghongling@kylinos.cn> Cc: stable@vger.kernel.org Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17USB: gadgetfs: Fix race between mounting and unmountingAlan Stern1-7/+21
The syzbot fuzzer and Gerald Lee have identified a use-after-free bug in the gadgetfs driver, involving processes concurrently mounting and unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super() can race with gadgetfs_kill_sb(), causing the latter to deallocate the_device while the former is using it. The output from KASAN says, in part: BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline] BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline] BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline] BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline] BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689 CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> ... atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 vfs_get_super fs/super.c:1190 [inline] get_tree_single+0xd0/0x160 fs/super.c:1207 vfs_get_tree+0x88/0x270 fs/super.c:1531 vfs_fsconfig_locked fs/fsopen.c:232 [inline] The simplest solution is to ensure that gadgetfs_fill_super() and gadgetfs_kill_sb() are serialized by making them both acquire a new mutex. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+33d7ad66d65044b93f16@syzkaller.appspotmail.com Reported-and-tested-by: Gerald Lee <sundaywind2004@gmail.com> Link: https://lore.kernel.org/linux-usb/CAO3qeMVzXDP-JU6v1u5Ags6Q-bb35kg3=C6d04DjzA9ffa5x1g@mail.gmail.com/ Fixes: e5d82a7360d1 ("vfs: Convert gadgetfs to use the new mount API") CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Y6XCPXBpn3tmjdCC@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: cdns3: remove fetched trb from cache before dequeuingPawel Laszczak1-0/+12
After doorbell DMA fetches the TRB. If during dequeuing request driver changes NORMAL TRB to LINK TRB but doesn't delete it from controller cache then controller will handle cached TRB and packet can be lost. The example scenario for this issue looks like: 1. queue request - set doorbell 2. dequeue request 3. send OUT data packet from host 4. Device will accept this packet which is unexpected 5. queue new request - set doorbell 6. Device lost the expected packet. By setting DFLUSH controller clears DRDY bit and stop DMA transfer. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221115100039.441295-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-16USB: serial: option: add Quectel EM05CN modemDuke Xin(辛安文)1-0/+3
The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)1-0/+3
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler1-0/+1
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi1-0/+2
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)1-0/+3
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
2023-01-12USB: serial: option: add Quectel EM05-G (GR) modemDuke Xin(辛安文)1-0/+3
The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12USB: serial: option: add Quectel EM05-G (CS) modemDuke Xin(辛安文)1-0/+3
The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-06usb: dwc3: gadget: Ignore End Transfer delay on teardownThinh Nguyen1-1/+4
If we delay sending End Transfer for Setup TRB to be prepared, we need to check if the End Transfer was in preparation for a driver teardown/soft-disconnect. In those cases, just send the End Transfer command without delay. In the case of soft-disconnect, there's a very small chance the command may not go through immediately. But should it happen, the Setup TRB will be prepared during the polling of the controller halted state, allowing the command to go through then. In the case of disabling endpoint due to reconfiguration (e.g. set_interface(alt-setting) or usb reset), then it's driven by the host. Typically the host wouldn't immediately cancel the control request and send another control transfer to trigger the End Transfer command timeout. Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-06usb: dwc3: xilinx: include linux/gpio/consumer.hArnd Bergmann1-0/+1
The newly added gpio consumer calls cause a build failure in configurations that fail to include the right header implicitly: drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp': drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration] 207 | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | ^~~~~~~~~~~~~~~~~~~~~~~ | devm_clk_get_optional Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-06usb: fotg210-udc: fix error return code in fotg210_udc_probe()Yang Yingliang1-0/+2
After commit 5f217ccd520f ("fotg210-udc: Support optional external PHY"), the error code is re-assigned to 0 in fotg210_udc_probe(), if allocate or map memory fails after the assignment, it can't return an error code. Set the error code to -ENOMEM to fix this problem. Fixes: 5f217ccd520f ("fotg210-udc: Support optional external PHY") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221230065427.944586-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-28usb: fotg210: fix OTG-only buildArnd Bergmann1-4/+1
The fotg210 module combines the HCD and OTG drivers, which then fails to build when only the USB gadget support is enabled in the kernel but host support is not: aarch64-linux-ld: drivers/usb/fotg210/fotg210-core.o: in function `fotg210_init': fotg210-core.c:(.init.text+0xc): undefined reference to `usb_disabled' Move the check for usb_disabled() after the check for the HCD module, and let the OTG driver still be probed in this configuration. A nicer approach might be to have the common portion built as a library module, with the two platform other files registering their own platform_driver instances separately. Fixes: ddacd6ef44ca ("usb: fotg210: Fix Kconfig for USB host modules") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20221215165728.2062984-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-28Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"Ferry Toth1-1/+1
This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)3-4/+4
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-21Merge tag 'net-6.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter and can. Current release - regressions: - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func - rxrpc: - fix security setting propagation - fix null-deref in rxrpc_unuse_local() - fix switched parameters in peer tracing Current release - new code bugs: - rxrpc: - fix I/O thread startup getting skipped - fix locking issues in rxrpc_put_peer_locked() - fix I/O thread stop - fix uninitialised variable in rxperf server - fix the return value of rxrpc_new_incoming_call() - microchip: vcap: fix initialization of value and mask - nfp: fix unaligned io read of capabilities word Previous releases - regressions: - stop in-kernel socket users from corrupting socket's task_frag - stream: purge sk_error_queue in sk_stream_kill_queues() - openvswitch: fix flow lookup to use unmasked key - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port() - devlink: - hold region lock when flushing snapshots - protect devlink dump by the instance lock Previous releases - always broken: - bpf: - prevent leak of lsm program after failed attach - resolve fext program type when checking map compatibility - skbuff: account for tail adjustment during pull operations - macsec: fix net device access prior to holding a lock - bonding: switch back when high prio link up - netfilter: flowtable: really fix NAT IPv6 offload - enetc: avoid buffer leaks on xdp_do_redirect() failure - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg() - dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq" * tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) net: fec: check the return value of build_skb() net: simplify sk_page_frag Treewide: Stop corrupting socket's task_frag net: Introduce sk_use_task_frag in struct sock. mctp: Remove device type check at unregister net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len can: flexcan: avoid unbalanced pm_runtime_enable warning Documentation: devlink: add missing toc entry for etas_es58x devlink doc mctp: serial: Fix starting value for frame check sequence nfp: fix unaligned io read of capabilities word net: stream: purge sk_error_queue in sk_stream_kill_queues() myri10ge: Fix an error handling path in myri10ge_probe() net: microchip: vcap: Fix initialization of value and mask rxrpc: Fix the return value of rxrpc_new_incoming_call() rxrpc: rxperf: Fix uninitialised variable rxrpc: Fix I/O thread stop rxrpc: Fix switched parameters in peer tracing rxrpc: Fix locking issues in rxrpc_put_peer_locked() rxrpc: Fix I/O thread startup getting skipped ...
2022-12-19Treewide: Stop corrupting socket's task_fragBenjamin Coddington1-0/+1
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the GFP_NOIO flag on sk_allocation which the networking system uses to decide when it is safe to use current->task_frag. The results of this are unexpected corruption in task_frag when SUNRPC is involved in memory reclaim. The corruption can be seen in crashes, but the root cause is often difficult to ascertain as a crashing machine's stack trace will have no evidence of being near NFS or SUNRPC code. I believe this problem to be much more pervasive than reports to the community may indicate. Fix this by having kernel users of sockets that may corrupt task_frag due to reclaim set sk_use_task_frag = false. Preemptively correcting this situation for users that still set sk_allocation allows them to convert to memalloc_nofs_save/restore without the same unexpected corruptions that are sure to follow, unlikely to show up in testing, and difficult to bisect. CC: Philipp Reisner <philipp.reisner@linbit.com> CC: Lars Ellenberg <lars.ellenberg@linbit.com> CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> CC: Jens Axboe <axboe@kernel.dk> CC: Josef Bacik <josef@toxicpanda.com> CC: Keith Busch <kbusch@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Sagi Grimberg <sagi@grimberg.me> CC: Lee Duncan <lduncan@suse.com> CC: Chris Leech <cleech@redhat.com> CC: Mike Christie <michael.christie@oracle.com> CC: "James E.J. Bottomley" <jejb@linux.ibm.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Valentina Manea <valentina.manea.m@gmail.com> CC: Shuah Khan <shuah@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: David Howells <dhowells@redhat.com> CC: Marc Dionne <marc.dionne@auristor.com> CC: Steve French <sfrench@samba.org> CC: Christine Caulfield <ccaulfie@redhat.com> CC: David Teigland <teigland@redhat.com> CC: Mark Fasheh <mark@fasheh.com> CC: Joel Becker <jlbec@evilplan.org> CC: Joseph Qi <joseph.qi@linux.alibaba.com> CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Latchesar Ionkov <lucho@ionkov.net> CC: Dominique Martinet <asmadeus@codewreck.org> CC: Ilya Dryomov <idryomov@gmail.com> CC: Xiubo Li <xiubli@redhat.com> CC: Chuck Lever <chuck.lever@oracle.com> CC: Jeff Layton <jlayton@kernel.org> CC: Trond Myklebust <trond.myklebust@hammerspace.com> CC: Anna Schumaker <anna@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds8-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-12-16Merge tag 'usb-6.2-rc1' of ↵Linus Torvalds132-6914/+1612
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ...
2022-12-15xen: make remove callback of xen driver void returnedDawei Li1-3/+1
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <jgross@suse.com>
2022-12-14Merge tag 'v6.2-p1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Optimise away self-test overhead when they are disabled - Support symmetric encryption via keyring keys in af_alg - Flip hwrng default_quality, the default is now maximum entropy Algorithms: - Add library version of aesgcm - CFI fixes for assembly code - Add arm/arm64 accelerated versions of sm3/sm4 Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned - Fix selftest failures in rockchip - Add support for RK3328/RK3399 in rockchip - Add deflate support in qat - Merge ux500 into stm32 - Add support for TEE for PCI ID 0x14CA in ccp - Add mt7986 support in mtk - Add MaxLinear platform support in inside-secure - Add NPCM8XX support in npcm" * tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits) crypto: ux500/cryp - delete driver crypto: stm32/cryp - enable for use with Ux500 crypto: stm32 - enable drivers to be used on Ux500 dt-bindings: crypto: Let STM32 define Ux500 CRYP hwrng: geode - Fix PCI device refcount leak hwrng: amd - Fix PCI device refcount leak crypto: qce - Set DMA alignment explicitly crypto: octeontx2 - Set DMA alignment explicitly crypto: octeontx - Set DMA alignment explicitly crypto: keembay - Set DMA alignment explicitly crypto: safexcel - Set DMA alignment explicitly crypto: hisilicon/hpre - Set DMA alignment explicitly crypto: chelsio - Set DMA alignment explicitly crypto: ccree - Set DMA alignment explicitly crypto: ccp - Set DMA alignment explicitly crypto: cavium - Set DMA alignment explicitly crypto: img-hash - Fix variable dereferenced before check 'hdev->req' crypto: arm64/ghash-ce - use frame_push/pop macros consistently crypto: arm64/crct10dif - use frame_push/pop macros consistently crypto: arm64/aes-modes - use frame_push/pop macros consistently ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 16:37:40 +0000